This patch adds support for the lsi53c895a scsi host adapter, allowing seabios to boot from scsi disks and cdroms connected to the lsi scsi hba emulated by qemu.
This driver was written by looking at the expectations of qemu's lsi emulation. I have no idea idea how close this is to work on real hardware, and I somehow doubt anyone cares given the age of physical lsi scsi cards. It depends on !COREBOOT for that reason.
Signed-off-by: Gerd Hoffmann kraxel@redhat.com --- Makefile | 2 +- src/Kconfig | 6 ++ src/block.c | 3 +- src/blockcmd.c | 5 +- src/disk.h | 1 + src/lsi-scsi.c | 213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ src/lsi-scsi.h | 2 + src/post.c | 2 + 8 files changed, 231 insertions(+), 3 deletions(-) create mode 100644 src/lsi-scsi.c create mode 100644 src/lsi-scsi.h
diff --git a/Makefile b/Makefile index 8fa5c91..dfdec5c 100644 --- a/Makefile +++ b/Makefile @@ -13,7 +13,7 @@ SRCBOTH=misc.c stacks.c pmm.c output.c util.c block.c floppy.c ata.c mouse.c \ pnpbios.c pirtable.c vgahooks.c ramdisk.c pcibios.c blockcmd.c \ usb.c usb-uhci.c usb-ohci.c usb-ehci.c usb-hid.c usb-msc.c \ virtio-ring.c virtio-pci.c virtio-blk.c virtio-scsi.c apm.c ahci.c \ - usb-uas.c + usb-uas.c lsi-scsi.c SRC16=$(SRCBOTH) system.c disk.c font.c SRC32FLAT=$(SRCBOTH) post.c shadow.c memmap.c coreboot.c boot.c \ acpi.c smm.c mptable.c smbios.c pciinit.c optionroms.c mtrr.c \ diff --git a/src/Kconfig b/src/Kconfig index a798d9f..3f18e0f 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -119,6 +119,12 @@ menu "Hardware support" default y help Support boot from virtio-scsi storage. + config LSI_SCSI + depends on DRIVES && !COREBOOT + bool "lsi53c895a scsi controllers" + default y + help + Support boot from lsi53c895a scsi storage. config FLOPPY depends on DRIVES bool "Floppy controller" diff --git a/src/block.c b/src/block.c index 50d7bb4..2de9c5d 100644 --- a/src/block.c +++ b/src/block.c @@ -280,7 +280,7 @@ map_floppy_drive(struct drive_s *drive_g) static int process_scsi_op(struct disk_op_s *op) { - if (!CONFIG_VIRTIO_SCSI && !CONFIG_USB_MSC && !CONFIG_USB_UAS) + if (!CONFIG_VIRTIO_SCSI && !CONFIG_USB_MSC && !CONFIG_USB_UAS && !CONFIG_LSI_SCSI) return 0; switch (op->command) { case CMD_READ: @@ -323,6 +323,7 @@ process_op(struct disk_op_s *op) case DTYPE_USB: case DTYPE_UAS: case DTYPE_VIRTIO_SCSI: + case DTYPE_LSI_SCSI: return process_scsi_op(op); default: op->count = 0; diff --git a/src/blockcmd.c b/src/blockcmd.c index 2998a7c..0d0acfd 100644 --- a/src/blockcmd.c +++ b/src/blockcmd.c @@ -14,6 +14,7 @@ #include "usb-msc.h" // usb_cmd_data #include "usb-uas.h" // usb_cmd_data #include "virtio-scsi.h" // virtio_scsi_cmd_data +#include "lsi-scsi.h" // lsi_scsi_cmd_data #include "boot.h" // boot_add_hd
// Route command to low-level handler. @@ -32,6 +33,8 @@ cdb_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) return ahci_cmd_data(op, cdbcmd, blocksize); case DTYPE_VIRTIO_SCSI: return virtio_scsi_cmd_data(op, cdbcmd, blocksize); + case DTYPE_LSI_SCSI: + return lsi_scsi_cmd_data(op, cdbcmd, blocksize); default: op->count = 0; return DISK_RET_EPARAM; @@ -93,7 +96,7 @@ scsi_is_ready(struct disk_op_s *op) int scsi_init_drive(struct drive_s *drive, const char *s, int prio) { - if (!CONFIG_USB_UAS && !CONFIG_USB_MSC && !CONFIG_VIRTIO_SCSI) + if (!CONFIG_USB_UAS && !CONFIG_USB_MSC && !CONFIG_VIRTIO_SCSI && !CONFIG_LSI_SCSI) return 0;
struct disk_op_s dop; diff --git a/src/disk.h b/src/disk.h index 787b5b4..6810cd7 100644 --- a/src/disk.h +++ b/src/disk.h @@ -232,6 +232,7 @@ struct drive_s { #define DTYPE_VIRTIO_BLK 0x08 #define DTYPE_USB 0x09 #define DTYPE_UAS 0x0a +#define DTYPE_LSI_SCSI 0x0b
#define MAXDESCSIZE 80
diff --git a/src/lsi-scsi.c b/src/lsi-scsi.c new file mode 100644 index 0000000..37acd28 --- /dev/null +++ b/src/lsi-scsi.c @@ -0,0 +1,213 @@ +// (qemu-emulated) lsi53c895a boot support. +// +// Copyright (C) 2012 Red Hat Inc. +// +// Authors: +// Gerd Hoffmann kraxel@redhat.com +// +// based on virtio-scsi.c which is written by: +// Paolo Bonzini pbonzini@redhat.com +// +// This file may be distributed under the terms of the GNU LGPLv3 license. + +#include "util.h" // dprintf +#include "pci.h" // foreachpci +#include "config.h" // CONFIG_* +#include "biosvar.h" // GET_GLOBAL +#include "pci_ids.h" // PCI_DEVICE_ID_VIRTIO_BLK +#include "pci_regs.h" // PCI_VENDOR_ID +#include "boot.h" // bootprio_find_scsi_device +#include "blockcmd.h" // scsi_init_drive +#include "disk.h" + +#define LSI_REG_DSTAT 0x0c +#define LSI_REG_ISTAT0 0x14 +#define LSI_REG_DSP0 0x2c +#define LSI_REG_DSP1 0x2d +#define LSI_REG_DSP2 0x2e +#define LSI_REG_DSP3 0x2f +#define LSI_REG_SIST0 0x42 +#define LSI_REG_SIST1 0x43 + +#define LSI_ISTAT0_DIP 0x01 +#define LSI_ISTAT0_SIP 0x02 +#define LSI_ISTAT0_INTF 0x04 +#define LSI_ISTAT0_CON 0x08 +#define LSI_ISTAT0_SEM 0x10 +#define LSI_ISTAT0_SIGP 0x20 +#define LSI_ISTAT0_SRST 0x40 +#define LSI_ISTAT0_ABRT 0x80 + +struct lsi_lun_s { + struct drive_s drive; + struct pci_device *pci; + u32 iobase; + u8 target; + u8 lun; +}; + +static int +lsi_scsi_cmd(struct lsi_lun_s *llun, struct disk_op_s *op, + void *cdbcmd, u16 target, u16 lun, u16 blocksize) +{ + u32 iobase = GET_GLOBAL(llun->iobase); + u32 dma = ((cdb_is_read(cdbcmd, blocksize) ? 0x01000000 : 0x00000000) | + (op->count * blocksize)); + u8 msgout[] = { + 0x80 | lun, // select lun + 0x08, + }; + u8 status = 0xff; + u8 msgin_tmp[2]; + u8 msgin = 0xff; + + /* FIXME: probably not the best idea to have this on the stack ... */ + u32 script[] = { + /* select target, send scsi command */ + 0x40000000 | target << 16, // select target + 0x00000000, + 0x06000001, // msgout + (u32)MAKE_FLATPTR(GET_SEG(SS), &msgout), + 0x02000010, // scsi command + (u32)MAKE_FLATPTR(GET_SEG(SS), cdbcmd), + + /* handle disconnect */ + 0x87820000, // phase == msgin ? + 0x00000018, + 0x07000002, // msgin + (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin_tmp), + 0x50000000, // re-select + 0x00000000, + 0x07000002, // msgin + (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin_tmp), + + /* dma data, get status, raise irq */ + dma, // dma data + (u32)op->buf_fl, + 0x03000001, // status + (u32)MAKE_FLATPTR(GET_SEG(SS), &status), + 0x07000001, // msgin + (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin), + 0x98080000, // dma irq + 0x00000000, + }; + u32 dsp = (u32)MAKE_FLATPTR(GET_SEG(SS), &script); + + outb(dsp & 0xff, iobase + LSI_REG_DSP0); + outb((dsp >> 8) & 0xff, iobase + LSI_REG_DSP1); + outb((dsp >> 16) & 0xff, iobase + LSI_REG_DSP2); + outb((dsp >> 24) & 0xff, iobase + LSI_REG_DSP3); + + for (;;) { + u8 dstat = inb(iobase + LSI_REG_DSTAT); + u8 sist0 = inb(iobase + LSI_REG_SIST0); + u8 sist1 = inb(iobase + LSI_REG_SIST1); + if (sist0 || sist1) { + goto fail; + } + if (dstat & 0x04) { + break; + } + usleep(5); + } + + if (msgin == 0 && status == 0) { + return DISK_RET_SUCCESS; + } + +fail: + // sledge hammer to get back into a known-good state: hba reset + outb(LSI_ISTAT0_SRST, iobase + LSI_REG_ISTAT0); + return DISK_RET_EBADTRACK; +} + +int +lsi_scsi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) +{ + if (!CONFIG_LSI_SCSI) + return DISK_RET_EBADTRACK; + + struct lsi_lun_s *llun = + container_of(op->drive_g, struct lsi_lun_s, drive); + + return lsi_scsi_cmd(llun, op, cdbcmd, + GET_GLOBAL(llun->target), GET_GLOBAL(llun->lun), + blocksize); +} + +static int +lsi_scsi_add_lun(struct pci_device *pci, u32 iobase, u8 target, u8 lun) +{ + struct lsi_lun_s *llun = malloc_fseg(sizeof(*llun)); + if (!llun) { + warn_noalloc(); + return -1; + } + memset(llun, 0, sizeof(*llun)); + llun->drive.type = DTYPE_LSI_SCSI; + llun->drive.cntl_id = pci->bdf; + llun->pci = pci; + llun->target = target; + llun->lun = lun; + llun->iobase = iobase; + + char *name = znprintf(16, "lsi %02x:%02x.%x %d:%d", + pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf), + pci_bdf_to_fn(pci->bdf), target, lun); + int prio = bootprio_find_scsi_device(pci, target, lun); + int ret = scsi_init_drive(&llun->drive, name, prio); + free(name); + if (ret) + goto fail; + return 0; + +fail: + free(llun); + return -1; +} + +static void +lsi_scsi_scan_target(struct pci_device *pci, u32 iobase, u8 target) +{ + /* TODO: send REPORT LUNS. For now, only LUN 0 is recognized. */ + lsi_scsi_add_lun(pci, iobase, target, 0); +} + +static void +init_lsi_scsi(struct pci_device *pci) +{ + u16 bdf = pci->bdf; + u32 iobase = pci_config_readl(pci->bdf, PCI_BASE_ADDRESS_0) + & PCI_BASE_ADDRESS_IO_MASK; + + dprintf(1, "found lsi53c895a at %02x:%02x.%x, io @ %x\n", + pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf), + pci_bdf_to_fn(bdf), iobase); + + // reset + outb(LSI_ISTAT0_SRST, iobase + LSI_REG_ISTAT0); + + int i; + for (i = 0; i < 7; i++) + lsi_scsi_scan_target(pci, iobase, i); + + return; +} + +void +lsi_scsi_setup(void) +{ + ASSERT32FLAT(); + if (!CONFIG_LSI_SCSI) + return; + + dprintf(3, "init lsi53c895a\n"); + + struct pci_device *pci; + foreachpci(pci) { + if (pci->vendor != PCI_VENDOR_ID_LSI_LOGIC + || pci->device != PCI_DEVICE_ID_LSI_53C895A) + continue; + init_lsi_scsi(pci); + } +} diff --git a/src/lsi-scsi.h b/src/lsi-scsi.h new file mode 100644 index 0000000..f593f99 --- /dev/null +++ b/src/lsi-scsi.h @@ -0,0 +1,2 @@ +void lsi_scsi_setup(void); +int lsi_scsi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize); diff --git a/src/post.c b/src/post.c index 3101505..0f31b4c 100644 --- a/src/post.c +++ b/src/post.c @@ -27,6 +27,7 @@ #include "ps2port.h" // ps2port_setup #include "virtio-blk.h" // virtio_blk_setup #include "virtio-scsi.h" // virtio_scsi_setup +#include "lsi-scsi.h" // lsi_scsi_setup
/**************************************************************** @@ -194,6 +195,7 @@ init_hw(void) ramdisk_setup(); virtio_blk_setup(); virtio_scsi_setup(); + lsi_scsi_setup(); }
// Begin the boot process by invoking an int0x19 in 16bit mode.