On 12/18/18 15:15, Аладышев Константин wrote:
I use coreboot+SeaBIOS bundle on custom motherboard
with Intel Haswell i7
and Lynxpoint-LP chipset and I've come to a strange issue with USB-to-SATA
bridge TUSB9261 (http://www.ti.com/product/TUSB9261
In my experiments I plug HDD to one USB port, and USB boot flash drive to
another USB port.
Everything works fine when HDD is present on USB-to-SATA bridge. SeaBIOS
displays both devices in its boot menu. But if HDD is not present and if USB
boot flash drive is plugged to a port greater than USB-to-SATA bridge port,
SeaBIOS doesn't see flash drive as bootable device.
In this case I see in log messages similar to this:
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/storage@7/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/usb-*@7
ehci_send_pipe qh=0x000eab80 dir=0 data=0x00006b79 size=31
ehci_send_pipe qh=0x000eab00 dir=128 data=0x00006c98 size=36
WARNING - Timeout at ehci_wait_td:516!
ehci pipe=0x000eab00 cur=000069c0 tok=80240d80 next=1 td=0x000069c0
USB transmission failed
Unable to configure USB MSC drive.
phys_free f4950 (detail=0x7f6c13c0)
Unable to configure USB MSC device.
Summarizing all the above with SeaBIOS logs:
SeaBIOS displays flash drive correctly as bootable device when:
- HDD is present on SATA-to-USB port (https://pastebin.com/SuKBkQrq
- HDD is not present on USB port, but SATA-to-USB port number is greater
than USB flash drive number (https://pastebin.com/9f6RTBHB
SeaBIOS doesn't display flash drive as bootable device when:
- HDD is not present on USB port and SATA-to-USB port number is less than
USB flash drive number (https://pastebin.com/abBPhej0
What can be the source of the problem and what can I do to solve this issue?
Without looking at the code, can you come up with an example for QEMU
to reproduce this?
PS: Please attach the logs in the future, so reading the mail one does
not need to be online.