Add CONFIG_KVMTOOL config option.
kvmtool supports virtio only, so disable drivers for all kinds of qemu emulated hardware and leave only virtio-blk and virtio-scsi enabled.
Set rom default size to 128k. Enable serial console for kvmtool. Add ram detection. Add pci devices scan.
Signed-off-by: Gerd Hoffmann kraxel@redhat.com --- Makefile | 1 + src/fw/paravirt.h | 3 +++ src/fw/paravirt.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ src/post.c | 4 +++- src/sercon.c | 2 ++ src/Kconfig | 23 +++++++++++++++++++++-- 6 files changed, 78 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile index eb8ad583ae..6ea8e19ee7 100644 --- a/Makefile +++ b/Makefile @@ -92,6 +92,7 @@ endif
target-y := target-$(CONFIG_QEMU) += $(OUT)bios.bin +target-$(CONFIG_KVMTOOL) += $(OUT)bios.bin target-$(CONFIG_CSM) += $(OUT)Csm16.bin target-$(CONFIG_COREBOOT) += $(OUT)bios.bin.elf target-$(CONFIG_BUILD_VGABIOS) += $(OUT)vgabios.bin diff --git a/src/fw/paravirt.h b/src/fw/paravirt.h index a14d83e101..57ee0cfc4d 100644 --- a/src/fw/paravirt.h +++ b/src/fw/paravirt.h @@ -60,4 +60,7 @@ int qemu_cfg_write_file(void *src, struct romfile_s *file, u32 offset, u32 len); int qemu_cfg_write_file_simple(void *src, u16 key, u32 offset, u32 len); u16 qemu_get_romfile_key(struct romfile_s *file);
+void kvmtool_preinit(void); +void kvmtool_platform_setup(void); + #endif diff --git a/src/fw/paravirt.c b/src/fw/paravirt.c index 9674ab8ba8..0d4855e2e2 100644 --- a/src/fw/paravirt.c +++ b/src/fw/paravirt.c @@ -621,3 +621,51 @@ void qemu_cfg_init(void) dprintf(1, "Moving pm_base to 0x%x\n", acpi_pm_base); } } + +void +kvmtool_platform_setup(void) +{ + if (!CONFIG_KVMTOOL) + return; + + pci_probe_devices(); +} + +void +kvmtool_preinit(void) +{ + /* + * When started without firmware kvmtool creates a e820 map for + * the guest kernel. When started with "--firmware $file" it + * doesn't, so we have to figure. + * + * Detects only memory below 4G for now as we run in 32bit mode. + * For memory above 4G we would have to: + * (1) get hints from kvmtool somehow, or + * (2) enable paging, or + * (3) enter long mode. + * + * There is a 768M memory hole for I/O, + * see x86/include/kvm/kvm-arch.h in kvmtool. + */ + static const u32 max_mb_32bit = 4096 - 768; + u32 mb, *ptr; + + if (!CONFIG_KVMTOOL) + return; + + for (mb = 16; mb < max_mb_32bit; mb++) { + ptr = (void*)(mb * 1024 * 1024 - 4); + *ptr = mb; + } + for (mb = 16; mb < max_mb_32bit; mb++) { + ptr = (void*)(mb * 1024 * 1024 - 4); + if (*ptr != mb) + break; + RamSize = mb * 1024 * 1024; + } + + dprintf(1,"kvmtool: probed %d MB low RAM.\n", + RamSize / (1024 * 1024)); + e820_add(0, RamSize, E820_RAM); +} diff --git a/src/post.c b/src/post.c index f93106a1c9..f7268ecb8f 100644 --- a/src/post.c +++ b/src/post.c @@ -147,6 +147,7 @@ platform_hardware_setup(void)
// Platform specific setup qemu_platform_setup(); + kvmtool_platform_setup(); coreboot_platform_setup();
// Setup timers and periodic clock interrupt @@ -307,6 +308,7 @@ dopost(void)
// Detect ram and setup internal malloc. qemu_preinit(); + kvmtool_preinit(); coreboot_preinit(); malloc_preinit();
@@ -320,7 +322,7 @@ dopost(void) void VISIBLE32FLAT handle_post(void) { - if (!CONFIG_QEMU && !CONFIG_COREBOOT) + if (!CONFIG_QEMU && !CONFIG_COREBOOT && !CONFIG_KVMTOOL) return;
serial_debug_preinit(); diff --git a/src/sercon.c b/src/sercon.c index 5d27051efb..0b7722ec08 100644 --- a/src/sercon.c +++ b/src/sercon.c @@ -517,6 +517,8 @@ void sercon_setup(void) u16 addr;
addr = romfile_loadint("etc/sercon-port", 0); + if (!addr && CONFIG_KVMTOOL) + addr = 0x3f8; if (!addr) return; dprintf(1, "sercon: using ioport 0x%x\n", addr); diff --git a/src/Kconfig b/src/Kconfig index 00108057d7..985594c51b 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -25,6 +25,11 @@ choice Configure to be used by EFI firmware as Compatibility Support module (CSM) to provide legacy BIOS services.
+ config KVMTOOL + bool "Build for kvmtool" + help + Configure for an emulated machine (kvmtool). + endchoice
config QEMU_HARDWARE @@ -61,6 +66,7 @@ endchoice Support an interactive boot menu at end of post. config BOOTSPLASH depends on BOOTMENU + depends on !KVMTOOL bool "Graphical boot splash screen" default y help @@ -124,6 +130,7 @@ endchoice
config ROM_SIZE int "ROM size (in KB)" + default 128 if KVMTOOL default 0 help Set the ROM size. Say '0' here to make seabios figure the @@ -138,6 +145,7 @@ endmenu menu "Hardware support" config ATA depends on DRIVES + depends on !KVMTOOL bool "ATA controllers" default y help @@ -156,24 +164,26 @@ menu "Hardware support" Use 32bit PIO accesses on ATA (minor optimization on PCI transfers). config AHCI depends on DRIVES + depends on !KVMTOOL bool "AHCI controllers" default y help Support for AHCI disk code. config SDCARD depends on DRIVES + depends on !KVMTOOL bool "SD controllers" default y help Support for SD cards on PCI host controllers. config VIRTIO_BLK - depends on DRIVES && QEMU_HARDWARE + depends on DRIVES && (QEMU_HARDWARE || KVMTOOL) bool "virtio-blk controllers" default y help Support boot from virtio-blk storage. config VIRTIO_SCSI - depends on DRIVES && QEMU_HARDWARE + depends on DRIVES && (QEMU_HARDWARE || KVMTOOL) bool "virtio-scsi controllers" default y help @@ -204,6 +214,7 @@ menu "Hardware support" Support boot from qemu-emulated lsi53c895a scsi storage. config MEGASAS depends on DRIVES + depends on !KVMTOOL bool "LSI MegaRAID SAS controllers" default y help @@ -216,6 +227,7 @@ menu "Hardware support" Support boot from LSI MPT Fusion scsi storage. config FLOPPY depends on DRIVES && HARDWARE_IRQ + depends on !KVMTOOL bool "Floppy controller" default y help @@ -229,6 +241,7 @@ menu "Hardware support" QEMU fw_cfg. config NVME depends on DRIVES + depends on !KVMTOOL bool "NVMe controllers" default y help @@ -236,6 +249,7 @@ menu "Hardware support"
config PS2PORT depends on KEYBOARD || MOUSE + depends on !KVMTOOL bool "PS/2 port" default y help @@ -243,6 +257,7 @@ menu "Hardware support"
config USB bool "USB" + depends on !KVMTOOL default y help Support USB devices. @@ -355,6 +370,7 @@ menu "Hardware support" Initialize the Memory Type Range Registers (on emulators). config PMTIMER bool "Support ACPI timer" + depends on !KVMTOOL default y help Detect and use the ACPI timer for timekeeping. @@ -404,6 +420,7 @@ menu "BIOS interfaces" config OPTIONROMS bool "Option ROMS" default y + depends on !KVMTOOL help Support finding and running option roms during POST. config PMM @@ -466,6 +483,7 @@ menu "BIOS interfaces"
config TCGBIOS depends on S3_RESUME + depends on !KVMTOOL bool "TPM support and TCG BIOS extensions" default y help @@ -493,6 +511,7 @@ menu "BIOS Tables" sometimes called DMI. config ACPI bool "ACPI" + depends on !KVMTOOL default y help Support generation of ACPI tables.