On Thu, Jan 14, 2016 at 05:36:51PM +0100, Gerd Hoffmann wrote:
On Do, 2016-01-14 at 14:50 +0000, Ian Campbell wrote:
Hello,
The xen.git development branch currently points to SeaBIOS rel-1.9.0, but Roger has tripped over a build issue which is fixed by 3b8c5378dfe2 "build: fix typo in buildversion.py".
Is there any plan for either a 1.9.1 or a 1.10.0 in the near future which would include this, so I can roll forward to that?
1.10 will take a while ...
Or if not a 1.9.1 release perhaps for now just a 1.9-stable branch could be created?
1.9-stable created now, with the patch above cherry-picked.
Doing 1.9.1 soonish (next week maybe) is fine with me. If someone would like to see other patches backported to 1.9-stable please speak up now.
There were a bunch of fixes that I think should be considered for 1.9.1:
aa34e4e5 - xhci: Check for device disconnects during USB2 reset polling c01b41c5 - xhci: Wait for port enable even for USB3 devices 460e9aac - sdcard: Only enable error_irq_enable for bits defined in SDHCI v1 spec 8f7dc5ab - sdcard: fix typo causing 32bit write to 16bit block_size field 0c5a6077 - nmi: Don't try to switch onto extra stack in NMI handler 82f32797 - scsi: Do not call printf() from scsi_is_ready() 3e8d75f3 - coreboot: Check for unaligned cbfs header
-Kevin