[SeaBIOS] Re: [PATCH] Add AHCI Power ON + ICC_ACTIVE into port setup code

[Gerd Hoffmann]

On Tue, Jan 09, 2024 at 04:34:23PM +0100, Andrej Kruták wrote:
> Windows appears to put the AHCI port into 'Partial power management state'
> during reboot, the command puts it back into 'active state'.
>
> AHCI/1: link down 0x00000231 (SCR STAT register)
>  ->
> AHCI/1: link up 0x00000133
> Signed-off-by: Andrej Krutak [e-mail]
>
> src/hw/ahci.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/src/hw/ahci.c b/src/hw/ahci.c
> index 3fa845aa..4f0f640a 100644
> --- a/src/hw/ahci.c
> +++ b/src/hw/ahci.c
> @@ -444,7 +444,8 @@ static int ahci_port_setup(struct ahci_port_s *port)
>      ahci_port_writel(ctrl, pnr, PORT_CMD, cmd);
>  /* spin up */
> cmd |= PORT_CMD_SPIN_UP;
> cmd &= ~PORT_CMD_ICC_MASK;
> cmd |= PORT_CMD_SPIN_UP | PORT_CMD_POWER_ON | PORT_CMD_ICC_ACTIVE;
> ahci_port_writel(ctrl, pnr, PORT_CMD, cmd);
> u32 end = timer_calc(AHCI_LINK_TIMEOUT);
> for (;;) {

Patch applied to master branch.

thanks,
  Gerd