Dear SeaBIOS folks,
as per request by Kevin I am moving the discussion of thread on the coreboot list [1] to the SeaBIOS list.
Am Sonntag, den 14.09.2014, 10:10 +0200 schrieb Paul Menzel:
testing the SSD Crucial m4 SSD 2.5 256 GB SATA 6 Gb/s on the Lenovo X60t, the payload SeaBIOS 1.7.5-40-g5109366 does not detect the drive.
[…] 32.705: |7f673000| WARNING - Timeout at ahci_port_setup:466! 32.705: |7f673000| AHCI/0: device not ready (tf 0x80) 33.205: |7f673000| WARNING - Timeout at ahci_port_reset:336! […]Hitting Ctrl + Alt + Delete, the drive is detected.
It is also reproducible on the Lenovo T60 with coreboot from four years ago and SeaBIOS 1.7.0-91-g7a39e72.
The drive is detected correctly on the ASRock E350M1 with coreboot and SeaBIOS 1.7.5.
Please find the whole serial log from SeaBIOS below.
Does that look like a coreboot or SeaBIOS problem?
From the replies on the coreboot mailing list, I was told coreboot and SeaBIOS are too fast for the SSD and it needs at least 500 ms for its initialization.
Though looking at the code in `src/hw/ahci.c`, it should have 32 seconds to initialize.
[…] #define AHCI_REQUEST_TIMEOUT 32000 // 32 seconds max for IDE ops […] /* clear error status */ err = ahci_port_readl(ctrl, pnr, PORT_SCR_ERR); if (err) ahci_port_writel(ctrl, pnr, PORT_SCR_ERR, err);
/* wait for device becoming ready */ end = timer_calc(AHCI_REQUEST_TIMEOUT); for (;;) { tf = ahci_port_readl(ctrl, pnr, PORT_TFDATA); if (!(tf & (ATA_CB_STAT_BSY | ATA_CB_STAT_DRQ))) break; if (timer_check(end)) { warn_timeout(); dprintf(1, "AHCI/%d: device not ready (tf 0x%x)\n", port->pnr, tf); return -1; } yield(); } […]
So it could still be a chipset problem, because it works on the ASRock E350M1. But Sven Schnelle reported it also happens with his Chromebook.
Thanks,
Paul
[1] http://www.coreboot.org/pipermail/coreboot/2014-September/thread.html#78607
$ ./scripts/readserial.py /dev/ttyUSB0 115200
======= Sun Sep 14 09:54:52 2014 (adjust=86.8us) 00.000: <00> 01.376: Changing serial settings was 0/0 now 3/0 01.376: SeaBIOS (version rel-1.7.5-40-g5109366-20140715_011246-my-lenovo-x60t) 01.376: Attempting to find coreboot table 01.376: Found coreboot table forwarder. 01.376: Now attempting to find coreboot memory map 01.376: SeaBIOS (version rel-1.7.5-40-g5109366-20140715_011246-my-lenovo-x60t) 01.376: Found coreboot cbmem console @ 7f7de000 01.376: Found mainboard Lenovo ThinkPad X60 / X60s 01.376: malloc preinit 01.376: Relocating init from 0x000e6c20 to 0x7f679220 (size 44320) 01.376: malloc init 01.376: Found CBFS header at 0xfffffa50 01.376: Add romfile: cmos_layout.bin (size=1828) 01.376: Add romfile: pci8086,27a2.rom (size=65536) 01.376: Add romfile: cmos.default (size=256) 01.376: Add romfile: cpu_microcode_blob.bin (size=94208) 01.377: Add romfile: etc/ps2-keyboard-spinup (size=8) 01.377: Add romfile: config (size=4221) 01.377: Add romfile: (size=29976) 01.377: Add romfile: fallback/romstage (size=50939) 01.377: Add romfile: fallback/ramstage (size=68308) 01.377: Add romfile: fallback/payload (size=55644) 01.377: Add romfile: (size=1723928) 01.377: init ivt 01.377: init bda 01.377: init bios32 01.377: init PMM 01.377: init PNPBIOS table 01.377: init keyboard 01.377: init mouse 01.377: init pic 01.377: math cp init 01.378: CPU Mhz=1663 01.379: init timer 01.379: PCI probe 01.379: PCI device 00:00.0 (vd=8086:27a0 c=0600) 01.379: PCI device 00:02.0 (vd=8086:27a2 c=0300) 01.379: PCI device 00:02.1 (vd=8086:27a6 c=0380) 01.379: PCI device 00:1b.0 (vd=8086:27d8 c=0403) 01.379: PCI device 00:1c.0 (vd=8086:27d0 c=0604) 01.379: PCI device 00:1c.1 (vd=8086:27d2 c=0604) 01.379: PCI device 00:1c.2 (vd=8086:27d4 c=0604) 01.379: PCI device 00:1c.3 (vd=8086:27d6 c=0604) 01.379: PCI device 00:1d.0 (vd=8086:27c8 c=0c03) 01.379: PCI device 00:1d.1 (vd=8086:27c9 c=0c03) 01.379: PCI device 00:1d.2 (vd=8086:27ca c=0c03) 01.379: PCI device 00:1d.3 (vd=8086:27cb c=0c03) 01.379: PCI device 00:1d.7 (vd=8086:27cc c=0c03) 01.379: PCI device 00:1e.0 (vd=8086:2448 c=0604) 01.379: PCI device 00:1f.0 (vd=8086:27b9 c=0601) 01.379: PCI device 00:1f.1 (vd=8086:27df c=0101) 01.379: PCI device 00:1f.2 (vd=8086:27c5 c=0106) 01.379: PCI device 00:1f.3 (vd=8086:27da c=0c05) 01.379: PCI device 01:00.0 (vd=8086:109a c=0200) 01.379: PCI device 02:00.0 (vd=8086:4227 c=0280) 01.380: PCI device 05:00.0 (vd=1180:0476 c=0607) 01.379: PCI device 05:00.1 (vd=1180:0552 c=0c00) 01.380: PCI device 05:00.2 (vd=1180:0822 c=0805) 01.380: Found 23 PCI devices (max PCI bus is 06) 01.380: Relocating coreboot bios tables 01.380: Copying SMBIOS entry point from 0x7f7cc000 to 0x000f1920 01.381: Copying ACPI RSDP from 0x7f7cd000 to 0x000f18f0 01.381: Copying MPTABLE from 0x7f7d9000/7f7d9010 to 0x000f1720 01.381: rsdp=0x000f18f0 01.381: rsdt=0x7f7cd030 01.381: fadt=0x7f7d0510 01.381: pm_tmr_blk=508 01.381: Using pmtimer, ioport 0x508 01.381: Scan for VGA option rom 01.381: Attempting to init PCI bdf 00:02.0 (vd 8086:27a2) 01.381: Copying data 65536@0xffe007b8 to 65536@0x000c0000 01.415: Running option rom at c000:0003 01.462: unimplemented handle_155fXX:26: 01.462: a=80005f34 b=0000078f c=00000002 d=00000002 ds=0000 es=c000 ss=e000 01.462: si=00000994 di=00000080 bp=50a06e0c sp=0000ffe8 cs=c000 ip=4a6e f=0046 01.509: Turning on vga text mode console 01.540: SeaBIOS (version rel-1.7.5-40-g5109366-20140715_011246-my-lenovo-x60t) 01.540: Machine UUID c09ecb7b-2a1f-dc11-b88a-942d40962902 01.540: /7f677000\ Start thread 01.541: |7f677000| init usb 01.541: |7f677000| EHCI init on dev 00:1d.7 (regs=0xe4444020) 01.541: /7f676000\ Start thread 01.541: init ps2port 01.541: /7f674000\ Start thread 01.542: |7f674000| Copying data 8@0xffe27978 to 8@0x7f674fc8 01.542: /7f673000\ Start thread 01.542: init lpt 01.542: Found 0 lpt ports 01.542: init serial 01.542: Found 1 serial ports 01.542: init hard drives 01.542: ATA controller 1 at 1f0/3f4/0 (irq 14 dev f9) 01.542: /7f672000\ Start thread 01.542: /7f671000\ Start thread 01.542: ATA controller 2 at 170/374/0 (irq 15 dev f9) 01.542: /7f670000\ Start thread 01.542: |7f670000| powerup IDE floating 01.542: |7f670000| powerup IDE floating 01.542: |7f670000| powerup IDE floating 01.542: |7f670000| powerup IDE floating 01.542: \7f670000/ End thread 01.543: /7f670000\ Start thread 01.543: \7f671000/ End thread 01.543: \7f673000/ End thread 01.543: init ahci 01.542: AHCI controller at 1f.2, iobase e4444400, irq 0 01.543: AHCI: cap 0xdf12ff03, ports_impl 0x1 01.543: /7f673000\ Start thread 01.543: |7f673000| AHCI/0: probing 01.543: /7f671000\ Start thread 01.543: |7f673000| AHCI/0: link up 01.543: |7f672000| DVD/CD [ata0-0: DVD/CDRW UJDA775 ATAPI-5 DVD/CD] 01.543: |7f672000| Searching bootorder for: /pci@i0cf8/*@1f,1/drive@0/disk@0 01.543: |7f672000| Registering bootable: DVD/CD [ata0-0: DVD/CDRW UJDA775 ATAPI-5 DVD/CD] (type:3 prio:102 data:f16b0) 01.543: \7f672000/ End thread 01.543: |7f674000| Got ps2 nak (status=51) 01.543: |7f674000| ps2 command 2ff failed (aux=0) 01.543: /7f672000\ Start thread 01.544: \7f671000/ End thread 01.544: \7f670000/ End thread 01.544: /7f671000\ Start thread 01.544: /7f670000\ Start thread 01.544: |7f674000| Got ps2 nak (status=51) 01.544: |7f674000| ps2 command 2ff failed (aux=0) 01.544: /7f66f000\ Start thread 01.546: \7f672000/ End thread 01.546: |7f674000| Got ps2 nak (status=51) 01.546: |7f674000| ps2 command 2ff failed (aux=0) 01.546: \7f670000/ End thread 01.549: |7f674000| Got ps2 nak (status=51) 01.549: |7f674000| ps2 command 2ff failed (aux=0) 01.549: \7f66f000/ End thread 01.551: |7f674000| Got ps2 nak (status=51) 01.551: |7f674000| ps2 command 2ff failed (aux=0) 01.553: |7f674000| Got ps2 nak (status=51) 01.553: |7f674000| ps2 command 2ff failed (aux=0) 01.555: |7f674000| Got ps2 nak (status=51) 01.555: |7f674000| ps2 command 2ff failed (aux=0) 01.557: |7f674000| Got ps2 nak (status=51) 01.557: |7f674000| ps2 command 2ff failed (aux=0) 01.559: |7f674000| Got ps2 nak (status=51) 01.559: |7f674000| ps2 command 2ff failed (aux=0) 01.561: |7f671000| set_address 0x7f678090 01.561: |7f674000| Got ps2 nak (status=51) 01.561: |7f674000| ps2 command 2ff failed (aux=0) 01.561: |7f677000| UHCI init on dev 00:1d.0 (io=5000) 01.561: /7f672000\ Start thread 01.561: /7f670000\ Start thread 01.561: \7f670000/ End thread 01.562: |7f671000| ehci_control 0x7f675450 (dir=0 cmd=8 data=0) 01.562: |7f677000| UHCI init on dev 00:1d.1 (io=5020) 01.562: /7f670000\ Start thread 01.562: /7f66f000\ Start thread 01.562: \7f66f000/ End thread 01.562: /7f66f000\ Start thread 01.562: \7f66f000/ End thread 01.562: |7f677000| UHCI init on dev 00:1d.2 (io=5040) 01.562: /7f66f000\ Start thread 01.562: /7f66e000\ Start thread 01.562: \7f66e000/ End thread 01.562: /7f66e000\ Start thread 01.562: \7f66e000/ End thread 01.562: |7f671000| config_usb: 0x7f675450 01.562: |7f671000| ehci_control 0x7f675450 (dir=128 cmd=8 data=8) 01.562: |7f674000| Got ps2 nak (status=51) 01.562: |7f674000| ps2 command 2ff failed (aux=0) 01.562: |7f677000| UHCI init on dev 00:1d.3 (io=5060) 01.562: /7f66e000\ Start thread 01.562: /7f66c000\ Start thread 01.563: \7f66c000/ End thread 01.562: /7f66c000\ Start thread 01.562: \7f66c000/ End thread 01.563: \7f672000/ End thread 01.563: |7f671000| device rev=0200 cls=09 sub=00 proto=02 size=64 01.563: |7f671000| ehci_control 0x7f675450 (dir=128 cmd=8 data=9) 01.563: \7f677000/ End thread 01.563: /7f672000\ Start thread 01.563: \7f672000/ End thread 01.563: \7f670000/ End thread 01.563: |7f671000| ehci_control 0x7f675450 (dir=128 cmd=8 data=41) 01.563: \7f66f000/ End thread 01.563: |7f671000| ehci_control 0x7f675450 (dir=0 cmd=8 data=0) 01.563: |7f674000| Got ps2 nak (status=51) 01.563: |7f674000| ps2 command 2ff failed (aux=0) 01.563: \7f66e000/ End thread 01.563: |7f671000| ehci_control 0x7f675450 (dir=128 cmd=8 data=7) 01.563: /7f672000\ Start thread 01.563: |7f672000| ehci_control 0x7f675450 (dir=0 cmd=8 data=0) 01.564: /7f670000\ Start thread 01.564: |7f674000| Got ps2 nak (status=51) 01.564: |7f674000| ps2 command 2ff failed (aux=0) 01.564: /7f66f000\ Start thread 01.564: |7f66f000| ehci_control 0x7f675450 (dir=0 cmd=8 data=0) 01.564: /7f66e000\ Start thread 01.564: |7f670000| ehci_control 0x7f675450 (dir=0 cmd=8 data=0) 01.565: |7f66e000| ehci_control 0x7f675450 (dir=0 cmd=8 data=0) 01.565: |7f674000| Got ps2 nak (status=51) 01.565: |7f674000| ps2 command 2ff failed (aux=0) 01.566: |7f674000| Got ps2 nak (status=51) 01.567: |7f674000| ps2 command 2ff failed (aux=0) 01.569: |7f674000| Got ps2 nak (status=51) 01.569: |7f674000| ps2 command 2ff failed (aux=0) 01.572: |7f674000| Got ps2 nak (status=51) 01.572: |7f674000| ps2 command 2ff failed (aux=0) 01.574: |7f674000| Got ps2 nak (status=51) 01.574: |7f674000| ps2 command 2ff failed (aux=0) 01.576: |7f674000| Got ps2 nak (status=51) 01.576: |7f674000| ps2 command 2ff failed (aux=0) 01.577: |7f674000| Got ps2 nak (status=51) 01.578: |7f674000| ps2 command 2ff failed (aux=0) 01.580: |7f674000| Got ps2 nak (status=51) 01.580: |7f674000| ps2 command 2ff failed (aux=0) 01.582: |7f674000| Got ps2 nak (status=51) 01.583: |7f674000| ps2 command 2ff failed (aux=0) 01.583: |7f672000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.584: |7f674000| Got ps2 nak (status=51) 01.585: |7f674000| ps2 command 2ff failed (aux=0) 01.585: |7f66f000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.586: |7f670000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.586: |7f672000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.586: |7f674000| Got ps2 nak (status=51) 01.586: |7f674000| ps2 command 2ff failed (aux=0) 01.586: |7f66e000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.587: |7f66f000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.587: |7f674000| Got ps2 nak (status=51) 01.587: |7f674000| ps2 command 2ff failed (aux=0) 01.587: |7f670000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.587: |7f672000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.588: |7f66e000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.588: |7f674000| Got ps2 nak (status=51) 01.588: |7f674000| ps2 command 2ff failed (aux=0) 01.588: |7f66f000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.588: |7f670000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.588: |7f672000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.588: |7f674000| Got ps2 nak (status=51) 01.589: |7f674000| ps2 command 2ff failed (aux=0) 01.589: \7f672000/ End thread 01.589: |7f66e000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.589: |7f66f000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.589: |7f674000| Got ps2 nak (status=51) 01.589: |7f674000| ps2 command 2ff failed (aux=0) 01.589: \7f66f000/ End thread 01.589: |7f670000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.589: \7f670000/ End thread 01.589: |7f66e000| ehci_control 0x7f675450 (dir=128 cmd=8 data=4) 01.590: |7f674000| Got ps2 nak (status=51) 01.590: |7f674000| ps2 command 2ff failed (aux=0) 01.590: \7f66e000/ End thread 01.590: |7f671000| Initialized USB HUB (0 ports used) 01.590: \7f671000/ End thread 01.590: |7f674000| Got ps2 nak (status=51) 01.591: |7f674000| ps2 command 2ff failed (aux=0) 01.591: \7f676000/ End thread 01.593: |7f674000| Got ps2 nak (status=51) 01.594: |7f674000| ps2 command 2ff failed (aux=0) 01.596: |7f674000| Got ps2 nak (status=51) 01.596: |7f674000| ps2 command 2ff failed (aux=0) 01.599: |7f674000| Got ps2 nak (status=51) 01.600: |7f674000| ps2 command 2ff failed (aux=0) 01.602: |7f674000| Got ps2 nak (status=51) 01.602: |7f674000| ps2 command 2ff failed (aux=0) 01.605: |7f674000| Got ps2 nak (status=51) 01.605: |7f674000| ps2 command 2ff failed (aux=0) 01.609: |7f674000| Got ps2 nak (status=51) 01.609: |7f674000| ps2 command 2ff failed (aux=0) 01.610: |7f674000| Got ps2 nak (status=51) 01.611: |7f674000| ps2 command 2ff failed (aux=0) 01.614: |7f674000| Got ps2 nak (status=51) 01.614: |7f674000| ps2 command 2ff failed (aux=0) 01.616: |7f674000| Got ps2 nak (status=51) 01.617: |7f674000| ps2 command 2ff failed (aux=0) 01.619: |7f674000| Got ps2 nak (status=51) 01.620: |7f674000| ps2 command 2ff failed (aux=0) 01.622: |7f674000| Got ps2 nak (status=51) 01.623: |7f674000| ps2 command 2ff failed (aux=0) 01.625: |7f674000| Got ps2 nak (status=51) 01.626: |7f674000| ps2 command 2ff failed (aux=0) 01.628: |7f674000| Got ps2 nak (status=51) 01.629: |7f674000| ps2 command 2ff failed (aux=0) 01.632: |7f674000| Got ps2 nak (status=51) 01.632: |7f674000| ps2 command 2ff failed (aux=0) 01.636: |7f674000| Got ps2 nak (status=51) 01.637: |7f674000| ps2 command 2ff failed (aux=0) 01.639: |7f674000| Got ps2 nak (status=51) 01.639: |7f674000| ps2 command 2ff failed (aux=0) 01.640: |7f674000| Got ps2 nak (status=51) 01.641: |7f674000| ps2 command 2ff failed (aux=0) 01.643: |7f674000| Got ps2 nak (status=51) 01.643: |7f674000| ps2 command 2ff failed (aux=0) 01.645: |7f674000| Got ps2 nak (status=51) 01.646: |7f674000| ps2 command 2ff failed (aux=0) 01.648: |7f674000| Got ps2 nak (status=51) 01.649: |7f674000| ps2 command 2ff failed (aux=0) 01.652: |7f674000| Got ps2 nak (status=51) 01.652: |7f674000| ps2 command 2ff failed (aux=0) 01.654: |7f674000| Got ps2 nak (status=51) 01.654: |7f674000| ps2 command 2ff failed (aux=0) 01.656: |7f674000| Got ps2 nak (status=51) 01.656: |7f674000| ps2 command 2ff failed (aux=0) 01.658: |7f674000| Got ps2 nak (status=51) 01.659: |7f674000| ps2 command 2ff failed (aux=0) 01.661: |7f674000| Got ps2 nak (status=51) 01.663: |7f674000| ps2 command 2ff failed (aux=0) 01.663: |7f674000| Got ps2 nak (status=51) 01.664: |7f674000| ps2 command 2ff failed (aux=0) 01.665: |7f674000| Got ps2 nak (status=51) 01.666: |7f674000| ps2 command 2ff failed (aux=0) 01.668: |7f674000| Got ps2 nak (status=51) 01.669: |7f674000| ps2 command 2ff failed (aux=0) 01.670: |7f674000| Got ps2 nak (status=51) 01.670: |7f674000| ps2 command 2ff failed (aux=0) 01.672: |7f674000| Got ps2 nak (status=51) 01.672: |7f674000| ps2 command 2ff failed (aux=0) 01.675: |7f674000| Got ps2 nak (status=51) 01.675: |7f674000| ps2 command 2ff failed (aux=0) 01.676: |7f674000| Got ps2 nak (status=51) 01.677: |7f674000| ps2 command 2ff failed (aux=0) 01.679: |7f674000| Got ps2 nak (status=51) 01.679: |7f674000| ps2 command 2ff failed (aux=0) 01.680: |7f674000| Got ps2 nak (status=51) 01.682: |7f674000| ps2 command 2ff failed (aux=0) 01.682: |7f674000| Got ps2 nak (status=51) 01.683: |7f674000| ps2 command 2ff failed (aux=0) 01.686: |7f674000| Got ps2 nak (status=51) 01.686: |7f674000| ps2 command 2ff failed (aux=0) 01.687: |7f674000| Got ps2 nak (status=51) 01.688: |7f674000| ps2 command 2ff failed (aux=0) 01.690: |7f674000| Got ps2 nak (status=51) 01.691: |7f674000| ps2 command 2ff failed (aux=0) 01.692: |7f674000| Got ps2 nak (status=51) 01.693: |7f674000| ps2 command 2ff failed (aux=0) 01.694: |7f674000| Got ps2 nak (status=51) 01.695: |7f674000| ps2 command 2ff failed (aux=0) 01.696: |7f674000| Got ps2 nak (status=51) 01.697: |7f674000| ps2 command 2ff failed (aux=0) 01.699: |7f674000| Got ps2 nak (status=51) 01.699: |7f674000| ps2 command 2ff failed (aux=0) 01.701: |7f674000| Got ps2 nak (status=51) 01.701: |7f674000| ps2 command 2ff failed (aux=0) 01.704: |7f674000| Got ps2 nak (status=51) 01.704: |7f674000| ps2 command 2ff failed (aux=0) 01.706: |7f674000| Got ps2 nak (status=51) 01.707: |7f674000| ps2 command 2ff failed (aux=0) 01.708: |7f674000| Got ps2 nak (status=51) 01.709: |7f674000| ps2 command 2ff failed (aux=0) 01.710: |7f674000| Got ps2 nak (status=51) 01.711: |7f674000| ps2 command 2ff failed (aux=0) 01.712: |7f674000| Got ps2 nak (status=51) 01.713: |7f674000| ps2 command 2ff failed (aux=0) 01.716: |7f674000| Got ps2 nak (status=51) 01.716: |7f674000| ps2 command 2ff failed (aux=0) 01.718: |7f674000| Got ps2 nak (status=51) 01.719: |7f674000| ps2 command 2ff failed (aux=0) 01.720: |7f674000| Got ps2 nak (status=51) 01.720: |7f674000| ps2 command 2ff failed (aux=0) 01.722: |7f674000| Discarding ps2 data aa (status=11) 02.335: |7f674000| PS2 keyboard initialized 02.335: \7f674000/ End thread 32.705: |7f673000| WARNING - Timeout at ahci_port_setup:466! 32.705: |7f673000| AHCI/0: device not ready (tf 0x80) 33.205: |7f673000| WARNING - Timeout at ahci_port_reset:336! 33.205: \7f673000/ End thread 33.206: All threads complete. 33.205: Scan for option roms 33.206: Attempting to init PCI bdf 00:00.0 (vd 8086:27a0) 33.206: Attempting to init PCI bdf 00:02.1 (vd 8086:27a6) 33.205: Attempting to init PCI bdf 00:1b.0 (vd 8086:27d8) 33.206: Attempting to init PCI bdf 00:1c.0 (vd 8086:27d0) 33.206: Attempting to init PCI bdf 00:1c.1 (vd 8086:27d2) 33.205: Attempting to init PCI bdf 00:1c.2 (vd 8086:27d4) 33.206: Attempting to init PCI bdf 00:1c.3 (vd 8086:27d6) 33.206: Attempting to init PCI bdf 00:1d.0 (vd 8086:27c8) 33.206: Attempting to init PCI bdf 00:1d.1 (vd 8086:27c9) 33.206: Attempting to init PCI bdf 00:1d.2 (vd 8086:27ca) 33.206: Attempting to init PCI bdf 00:1d.3 (vd 8086:27cb) 33.206: Attempting to init PCI bdf 00:1d.7 (vd 8086:27cc) 33.205: Attempting to init PCI bdf 00:1e.0 (vd 8086:2448) 33.205: Attempting to init PCI bdf 00:1f.0 (vd 8086:27b9) 33.206: Attempting to init PCI bdf 00:1f.2 (vd 8086:27c5) 33.206: Attempting to init PCI bdf 00:1f.3 (vd 8086:27da) 33.205: Attempting to init PCI bdf 01:00.0 (vd 8086:109a) 33.205: Attempting to init PCI bdf 02:00.0 (vd 8086:4227) 33.205: Attempting to init PCI bdf 05:00.0 (vd 1180:0476) 33.206: Attempting to init PCI bdf 05:00.1 (vd 1180:0552) 33.206: Attempting to init PCI bdf 05:00.2 (vd 1180:0822) 33.206: 33.206: Press F12 for boot menu. 33.206: 33.206: Checking for bootsplash 35.774: Searching bootorder for: HALT 35.774: Mapping cd drive 0x000f16b0 35.774: finalize PMM 35.774: malloc finalize 35.775: Space available for UMB: cf000-ee800, f0000-f1680 35.775: Returned 262144 bytes of ZoneHigh 35.775: e820 map has 6 items: 35.775: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 35.774: 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 35.774: 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 35.775: 3: 0000000000100000 - 000000007f6c4000 = 1 RAM 35.774: 4: 000000007f6c4000 - 0000000080000000 = 2 RESERVED 35.774: 5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED 35.775: Jump to int19 35.775: enter handle_19: 35.775: NULL 35.776: Booting from DVD/CD... 35.777: Device reports MEDIUM NOT PRESENT 35.777: scsi_is_ready returned -1 35.777: Boot failed: Could not read from CDROM (code 0003) 35.777: enter handle_18: 35.777: NULL 35.777: Booting from Floppy... 35.777: invalid handle_legacy_disk:696: 35.777: a=00000201 b=00000000 c=00000001 d=00000000 ds=0000 es=07c0 ss=e000 35.777: si=00000000 di=00000000 bp=00000000 sp=0000ffe8 cs=f000 ip=d066 f=0202 35.777: Boot failed: could not read the boot disk 35.777: 35.777: enter handle_18: 35.777: NULL 35.777: Booting from Hard Disk... 35.777: invalid handle_legacy_disk:696: 35.778: a=00000201 b=00000000 c=00000001 d=00000080 ds=0000 es=07c0 ss=e000 35.777: si=00000000 di=00000000 bp=00000000 sp=0000ffe8 cs=f000 ip=d066 f=0202 35.777: Boot failed: could not read the boot disk 35.777: 35.777: enter handle_18: 35.777: NULL 35.777: No bootable device. Retrying in 60 seconds. 41.647: In resume (status=0) 41.647: In 32bit resume 41.647: Attempting a hard reboot 41.873: <00> 42.313: <00> 43.046: Changing serial settings was 0/0 now 3/0 43.046: SeaBIOS (version rel-1.7.5-40-g5109366-20140715_011246-my-lenovo-x60t) 43.046: Attempting to find coreboot table 43.046: Found coreboot table forwarder. 43.046: Now attempting to find coreboot memory map 43.047: SeaBIOS (version rel-1.7.5-40-g5109366-20140715_011246-my-lenovo-x60t) 43.046: Found coreboot cbmem console @ 7f7de000 43.046: Found mainboard Lenovo ThinkPad X60 / X60s 43.047: malloc preinit 43.047: Relocating init from 0x000e6c20 to 0x7f679220 (size 44320) 43.046: malloc init 43.047: Found CBFS header at 0xfffffa50 43.046: Add romfile: cmos_layout.bin (size=1828) 43.047: Add romfile: pci8086,27a2.rom (size=65536) 43.046: Add romfile: cmos.default (size=256) 43.046: Add romfile: cpu_microcode_blob.bin (size=94208) 43.047: Add romfile: etc/ps2-keyboard-spinup (size=8) 43.047: Add romfile: config (size=4221) 43.047: Add romfile: (size=29976) 43.047: Add romfile: fallback/romstage (size=50939) 43.047: Add romfile: fallback/ramstage (size=68308) 43.047: Add romfile: fallback/payload (size=55644) 43.047: Add romfile: (size=1723928) 43.048: init ivt 43.048: init bda 43.047: init bios32 43.047: init PMM 43.047: init PNPBIOS table 43.047: init keyboard 43.047: init mouse 43.047: init pic 43.047: math cp init 43.048: CPU Mhz=1664 43.049: init timer 43.049: PCI probe 43.049: PCI device 00:00.0 (vd=8086:27a0 c=0600) 43.049: PCI device 00:02.0 (vd=8086:27a2 c=0300) 43.049: PCI device 00:02.1 (vd=8086:27a6 c=0380) 43.049: PCI device 00:1b.0 (vd=8086:27d8 c=0403) 43.049: PCI device 00:1c.0 (vd=8086:27d0 c=0604) 43.049: PCI device 00:1c.1 (vd=8086:27d2 c=0604) 43.049: PCI device 00:1c.2 (vd=8086:27d4 c=0604) 43.049: PCI device 00:1c.3 (vd=8086:27d6 c=0604) 43.049: PCI device 00:1d.0 (vd=8086:27c8 c=0c03) 43.049: PCI device 00:1d.1 (vd=8086:27c9 c=0c03) 43.049: PCI device 00:1d.2 (vd=8086:27ca c=0c03) 43.049: PCI device 00:1d.3 (vd=8086:27cb c=0c03) 43.049: PCI device 00:1d.7 (vd=8086:27cc c=0c03) 43.049: PCI device 00:1e.0 (vd=8086:2448 c=0604) 43.049: PCI device 00:1f.0 (vd=8086:27b9 c=0601) 43.049: PCI device 00:1f.1 (vd=8086:27df c=0101) 43.049: PCI device 00:1f.2 (vd=8086:27c5 c=0106) 43.049: PCI device 00:1f.3 (vd=8086:27da c=0c05) 43.049: PCI device 01:00.0 (vd=8086:109a c=0200) 43.049: PCI device 02:00.0 (vd=8086:4227 c=0280) 43.049: PCI device 05:00.0 (vd=1180:0476 c=0607) 43.050: PCI device 05:00.1 (vd=1180:0552 c=0c00) 43.049: PCI device 05:00.2 (vd=1180:0822 c=0805) 43.050: Found 23 PCI devices (max PCI bus is 06) 43.050: Relocating coreboot bios tables 43.051: Copying SMBIOS entry point from 0x7f7cc000 to 0x000f1920 43.051: Copying ACPI RSDP from 0x7f7cd000 to 0x000f18f0 43.051: Copying MPTABLE from 0x7f7d9000/7f7d9010 to 0x000f1720 43.051: rsdp=0x000f18f0 43.051: rsdt=0x7f7cd030 43.051: fadt=0x7f7d0510 43.051: pm_tmr_blk=508 43.051: Using pmtimer, ioport 0x508 43.051: Scan for VGA option rom 43.052: Attempting to init PCI bdf 00:02.0 (vd 8086:27a2) 43.051: Copying data 65536@0xffe007b8 to 65536@0x000c0000 43.084: Running option rom at c000:0003 43.132: unimplemented handle_155fXX:26: 43.132: a=80005f34 b=0000078f c=00000002 d=00000002 ds=0000 es=c000 ss=e000 43.132: si=00000994 di=00000080 bp=50a06e0c sp=0000ffe8 cs=c000 ip=4a6e f=0046 43.178: Turning on vga text mode console 43.210: SeaBIOS (version rel-1.7.5-40-g5109366-20140715_011246-my-lenovo-x60t) 43.211: Machine UUID c09ecb7b-2a1f-dc11-b88a-942d40962902 43.211: /7f677000\ Start thread 43.210: |7f677000| init usb 43.211: |7f677000| EHCI init on dev 00:1d.7 (regs=0xe4444020) 43.210: /7f676000\ Start thread 43.211: init ps2port 43.210: /7f674000\ Start thread 43.212: |7f674000| Copying data 8@0xffe27978 to 8@0x7f674fc8 43.211: /7f673000\ Start thread 43.212: init lpt 43.212: Found 0 lpt ports 43.212: init serial 43.212: Found 1 serial ports 43.212: init hard drives 43.212: ATA controller 1 at 1f0/3f4/0 (irq 14 dev f9) 43.212: /7f672000\ Start thread 43.212: /7f671000\ Start thread 43.212: ATA controller 2 at 170/374/0 (irq 15 dev f9) 43.213: /7f670000\ Start thread 43.213: |7f670000| powerup IDE floating 43.212: |7f670000| powerup IDE floating 43.212: |7f670000| powerup IDE floating 43.212: |7f670000| powerup IDE floating 43.212: \7f670000/ End thread 43.212: /7f670000\ Start thread 43.212: \7f671000/ End thread 43.212: \7f673000/ End thread 43.212: init ahci 43.212: AHCI controller at 1f.2, iobase e4444400, irq 0 43.212: AHCI: cap 0xdf12ff03, ports_impl 0x1 43.212: /7f673000\ Start thread 43.212: |7f673000| AHCI/0: probing 43.212: /7f671000\ Start thread 43.213: \7f670000/ End thread 43.213: |7f673000| AHCI/0: link up 43.213: |7f672000| DVD/CD [ata0-0: DVD/CDRW UJDA775 ATAPI-5 DVD/CD] 43.213: |7f672000| Searching bootorder for: /pci@i0cf8/*@1f,1/drive@0/disk@0 43.213: |7f672000| Registering bootable: DVD/CD [ata0-0: DVD/CDRW UJDA775 ATAPI-5 DVD/CD] (type:3 prio:102 data:f16b0) 43.213: \7f672000/ End thread 43.213: /7f672000\ Start thread 43.213: \7f671000/ End thread 43.213: |7f673000| AHCI/0: ... finished, status 0x51, ERROR 0x4 43.213: /7f671000\ Start thread 43.213: |7f673000| Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0 43.213: /7f670000\ Start thread 43.213: |7f673000| AHCI/0: registering: "AHCI/0: M4-CT256M4SSD2 ATA-9 Hard-Disk (238 GiBytes)" 43.213: |7f673000| Registering bootable: AHCI/0: M4-CT256M4SSD2 ATA-9 Hard-Disk (238 GiBytes) (type:2 prio:103 data:f1660) 43.213: \7f673000/ End thread 43.213: /7f673000\ Start thread 43.213: \7f670000/ End thread 43.213: \7f672000/ End thread 43.230: \7f673000/ End thread 43.261: |7f671000| set_address 0x7f678090 43.261: |7f677000| UHCI init on dev 00:1d.0 (io=5000) 43.261: /7f673000\ Start thread 43.261: /7f672000\ Start thread 43.262: \7f672000/ End thread 43.261: |7f671000| ehci_control 0x7f675bd0 (dir=0 cmd=8 data=0) 43.261: |7f677000| UHCI init on dev 00:1d.1 (io=5020) 43.262: /7f672000\ Start thread 43.261: /7f670000\ Start thread 43.261: \7f670000/ End thread 43.262: /7f670000\ Start thread 43.261: \7f670000/ End thread 43.261: |7f677000| UHCI init on dev 00:1d.2 (io=5040) 43.262: /7f670000\ Start thread 43.262: /7f66f000\ Start thread 43.262: \7f66f000/ End thread 43.262: /7f66f000\ Start thread 43.262: \7f66f000/ End thread 43.262: |7f671000| config_usb: 0x7f675bd0 43.262: |7f671000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=8) 43.262: |7f677000| UHCI init on dev 00:1d.3 (io=5060) 43.261: /7f66f000\ Start thread 43.262: /7f66e000\ Start thread 43.262: \7f66e000/ End thread 43.262: /7f66e000\ Start thread 43.262: \7f66e000/ End thread 43.262: \7f673000/ End thread 43.262: |7f671000| device rev=0200 cls=09 sub=00 proto=02 size=64 43.262: |7f671000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=9) 43.262: \7f677000/ End thread 43.262: /7f673000\ Start thread 43.262: \7f673000/ End thread 43.262: \7f672000/ End thread 43.262: |7f671000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=41) 43.262: \7f670000/ End thread 43.262: |7f671000| ehci_control 0x7f675bd0 (dir=0 cmd=8 data=0) 43.262: \7f66f000/ End thread 43.262: |7f671000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=7) 43.262: /7f673000\ Start thread 43.262: |7f673000| ehci_control 0x7f675bd0 (dir=0 cmd=8 data=0) 43.262: /7f672000\ Start thread 43.262: /7f670000\ Start thread 43.262: |7f670000| ehci_control 0x7f675bd0 (dir=0 cmd=8 data=0) 43.262: /7f66f000\ Start thread 43.262: |7f672000| ehci_control 0x7f675bd0 (dir=0 cmd=8 data=0) 43.262: |7f66f000| ehci_control 0x7f675bd0 (dir=0 cmd=8 data=0) 43.343: |7f673000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.347: |7f670000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f672000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.347: |7f673000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.347: |7f66f000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.347: |7f670000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.347: |7f672000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.347: |7f673000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f66f000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f670000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f672000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f673000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f66f000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f670000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f672000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f673000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f66f000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f670000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f672000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f673000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: \7f673000/ End thread 43.348: |7f66f000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: |7f670000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.348: \7f670000/ End thread 43.348: |7f672000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.351: \7f672000/ End thread 43.349: |7f66f000| ehci_control 0x7f675bd0 (dir=128 cmd=8 data=4) 43.349: \7f66f000/ End thread 43.349: |7f671000| Initialized USB HUB (0 ports used) 43.348: \7f671000/ End thread 43.352: \7f676000/ End thread 43.501: |7f674000| PS2 keyboard initialized 43.501: \7f674000/ End thread 43.501: All threads complete. 43.501: Scan for option roms 43.501: Attempting to init PCI bdf 00:00.0 (vd 8086:27a0) 43.501: Attempting to init PCI bdf 00:02.1 (vd 8086:27a6) 43.501: Attempting to init PCI bdf 00:1b.0 (vd 8086:27d8) 43.501: Attempting to init PCI bdf 00:1c.0 (vd 8086:27d0) 43.501: Attempting to init PCI bdf 00:1c.1 (vd 8086:27d2) 43.501: Attempting to init PCI bdf 00:1c.2 (vd 8086:27d4) 43.502: Attempting to init PCI bdf 00:1c.3 (vd 8086:27d6) 43.501: Attempting to init PCI bdf 00:1d.0 (vd 8086:27c8) 43.501: Attempting to init PCI bdf 00:1d.1 (vd 8086:27c9) 43.501: Attempting to init PCI bdf 00:1d.2 (vd 8086:27ca) 43.501: Attempting to init PCI bdf 00:1d.3 (vd 8086:27cb) 43.501: Attempting to init PCI bdf 00:1d.7 (vd 8086:27cc) 43.501: Attempting to init PCI bdf 00:1e.0 (vd 8086:2448) 43.501: Attempting to init PCI bdf 00:1f.0 (vd 8086:27b9) 43.501: Attempting to init PCI bdf 00:1f.2 (vd 8086:27c5) 43.501: Attempting to init PCI bdf 00:1f.3 (vd 8086:27da) 43.501: Attempting to init PCI bdf 01:00.0 (vd 8086:109a) 43.501: Attempting to init PCI bdf 02:00.0 (vd 8086:4227) 43.501: Attempting to init PCI bdf 05:00.0 (vd 1180:0476) 43.501: Attempting to init PCI bdf 05:00.1 (vd 1180:0552) 43.502: Attempting to init PCI bdf 05:00.2 (vd 1180:0822) 43.501: 43.501: Press F12 for boot menu. 43.502: 43.502: Checking for bootsplash 46.035: Searching bootorder for: HALT 46.045: Mapping cd drive 0x000f16b0 46.045: Mapping hd drive 0x000f1660 to 0 46.045: drive 0x000f1660: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=500118192 46.045: finalize PMM 46.045: malloc finalize 46.045: Space available for UMB: cf000-ee800, f0000-f1630 46.045: Returned 253952 bytes of ZoneHigh 46.045: e820 map has 6 items: 46.045: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 46.045: 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 46.045: 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 46.045: 3: 0000000000100000 - 000000007f6c2000 = 1 RAM 46.045: 4: 000000007f6c2000 - 0000000080000000 = 2 RESERVED 46.045: 5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED 46.045: Jump to int19 46.045: enter handle_19: 46.045: NULL 46.045: Booting from DVD/CD... 46.045: Device reports MEDIUM NOT PRESENT 46.045: scsi_is_ready returned -1 46.045: Boot failed: Could not read from CDROM (code 0003) 46.045: enter handle_18: 46.045: NULL 46.045: Booting from Hard Disk... 46.045: Booting from 0000:7c00