On 08/24/18 10:53, Jing Liu wrote:
Enable the firmware recognizing RedHat legacy PCI bridge device ID, so QEMU can reserve additional PCI bridge resource capability. Change the debug level lower to 3 when it is non-QEMU bridge.
Signed-off-by: Jing Liu jing2.liu@linux.intel.com
src/fw/pciinit.c | 50 +++++++++++++++++++++++++++++--------------------- src/hw/pci_ids.h | 1 + 2 files changed, 30 insertions(+), 21 deletions(-)
diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c index 62a32f1..c0634bc 100644 --- a/src/fw/pciinit.c +++ b/src/fw/pciinit.c @@ -525,30 +525,38 @@ static void pci_bios_init_platform(void)
static u8 pci_find_resource_reserve_capability(u16 bdf) {
- if (pci_config_readw(bdf, PCI_VENDOR_ID) == PCI_VENDOR_ID_REDHAT &&
pci_config_readw(bdf, PCI_DEVICE_ID) ==
PCI_DEVICE_ID_REDHAT_ROOT_PORT) {
u8 cap = 0;
do {
cap = pci_find_capability(bdf, PCI_CAP_ID_VNDR, cap);
} while (cap &&
pci_config_readb(bdf, cap + PCI_CAP_REDHAT_TYPE_OFFSET) !=
REDHAT_CAP_RESOURCE_RESERVE);
if (cap) {
u8 cap_len = pci_config_readb(bdf, cap + PCI_CAP_FLAGS);
if (cap_len < RES_RESERVE_CAP_SIZE) {
dprintf(1, "PCI: QEMU resource reserve cap length %d is invalid\n",
cap_len);
return 0;
}
} else {
dprintf(1, "PCI: QEMU resource reserve cap not found\n");
- u16 device_id;
- if (pci_config_readw(bdf, PCI_VENDOR_ID) != PCI_VENDOR_ID_REDHAT) {
dprintf(3, "PCI: This is non-QEMU bridge.\n");
I think I liked the previous language slightly more ("PCI: QEMU resource reserve cap vendor ID doesn't match."), but that shouldn't be a problem.
Series Reviewed-by: Laszlo Ersek lersek@redhat.com
Thanks Laszlo
return 0;
- }
- device_id = pci_config_readw(bdf, PCI_DEVICE_ID);
- if (device_id != PCI_DEVICE_ID_REDHAT_ROOT_PORT &&
device_id != PCI_DEVICE_ID_REDHAT_BRIDGE) {
dprintf(1, "PCI: QEMU resource reserve cap device ID doesn't match.\n");
return 0;
- }
- u8 cap = 0;
- do {
cap = pci_find_capability(bdf, PCI_CAP_ID_VNDR, cap);
- } while (cap &&
pci_config_readb(bdf, cap + PCI_CAP_REDHAT_TYPE_OFFSET) !=
REDHAT_CAP_RESOURCE_RESERVE);
- if (cap) {
u8 cap_len = pci_config_readb(bdf, cap + PCI_CAP_FLAGS);
if (cap_len < RES_RESERVE_CAP_SIZE) {
dprintf(1, "PCI: QEMU resource reserve cap length %d is invalid\n",
cap_len);
return 0; }
} else {return cap;
dprintf(1, "PCI: QEMU resource reserve cap VID or DID doesn't match.\n");
return 0;
}dprintf(1, "PCI: QEMU resource reserve cap not found\n");
- return cap;
}
/**************************************************************** diff --git a/src/hw/pci_ids.h b/src/hw/pci_ids.h index 38fa2ca..1096461 100644 --- a/src/hw/pci_ids.h +++ b/src/hw/pci_ids.h @@ -2265,6 +2265,7 @@
#define PCI_VENDOR_ID_REDHAT 0x1b36 #define PCI_DEVICE_ID_REDHAT_ROOT_PORT 0x000C +#define PCI_DEVICE_ID_REDHAT_BRIDGE 0x0001
#define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29