On Wed, Jun 12, 2019 at 04:30:03PM +0300, Sam Eiderman wrote:
On 12 Jun 2019, at 16:06, Gerd Hoffmann kraxel@redhat.com wrote:
On Wed, Jun 12, 2019 at 02:59:31PM +0300, Sam Eiderman wrote:
v1:
Non-standard logical geometries break under QEMU.
A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will guess - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead.
--verbose please.
As far I know seabios switches to LBA mode when the disk is simply too big for LCHS addressing. So I fail to see which problem is solved by this. If your guest needs LCHS, why do you assign a disk which can't be fully accessed using LCHS addressing?
The scenario is as follows:
A user has a disk with 56 spts. This disk has been already created under a bios that reported 56 spts. When migrating this disk to QEMU/SeaBIOS, SeaBIOS will report 63 spts (under LBA translation) - this will break the boot for this guest.
You sayed so already. I was looking for a real world example. Guests which can't deal with LBA should be pretty rare these days. What kind of guest? What other bios? Or is this a purely theoretical issue?
In addition we can not enforce SeaBIOS to rely on phyiscal geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads can not report more than 16 physical heads when moved to an IDE controller, the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization.
Well, not really. Moving disks from one controller to another when the OS depends on LHCS addressing never is a good idea. That already caused problems in the 90-ies, when moving scsi disks from one scsi host adapter to another type, *way* before virtualization became a thing.
I agree, but this is easily solvable in virtualized environments where the hypervisor can guess the correct LCHS values by inspecting the MBR,
Yes. This is exactly what the more clever scsi host adapter int13 rom implementations ended up doing too. Look at MBR to figure which LCHS they should use.
or letting the user set these values manually.
Why? Asking the user to deal with the mess is pretty lame if there are better options. And IMO doing this fully automatic in seabios is better.
BTW: One possible way to figure which LCHS layout a disk uses is to check the MBR partition table. With that we (a) don't need a new interface between qemu and seabios and (b) it is not needed to manually specify the geometry.
In my opinion SeaBIOS is not the correct place for this change since “enhancing” the detection of LCHS values in SeaBIOS may cause it to suddenly report different values for already existing guests which rely on LCHS - thus, breaking compatibility.
I can't see how this can break guests. It should either have no effect (guests using LBA) or unbreak guests due to LCHS changing from "wrong" to "correct".
cheers, Gerd