(I'm not trying to further argue for the idea below, just to clarify it:)
On 01/11/18 15:29, Stefan Berger wrote:
On 01/11/2018 09:02 AM, Laszlo Ersek wrote:
On 01/11/18 13:40, Igor Mammedov wrote:
On Wed, 10 Jan 2018 17:45:52 +0100 Laszlo Ersek firstname.lastname@example.org wrote:
(My understanding is that the guest has to populate the CRB, and then kick the hypervisor, so at least the register used for kicking must be in MMIO (or IO) space. And firmware cannot allocate MMIO or IO space (for platform devices). Thus, the register block must reside at a QEMU-determined GPA. Once we do that, why bother about RAM allocation?)
MMIO doesn't have to be fixed nor exist at all, we could use linker write to file operation in FW for switching from guest to QEMU. That's obviously intrusive work for FW and QEMU compared to hardcodded address in both QEMU and FW but as benefit changes to QEMU and FW don't have to be tightly coupled and layout could be changed whenever need arises.
Marc-André wrote, "The [CRB] region is registered at the same address as TIS (it's not entirely clear from the spec it is supposed to be there, but my laptop tpm use the same)."
And, the spec declares the register block at the fixed range FED4_0000h-FED4_4FFFh.
How about this:
(1) stick with the TPM specs and implement the TIS and/or CRB interfaces,
(2) *except* make the base address of the register block a compat property for the QEMU device,
(3) generate data tables (TPM2) and AML tables (SSDT/_DSM) that expose the device to the guest OS as ACPI or ACPI+CRB (i.e., "fTPM"), *not* TIS and/or CRB
Why? Linux doesn't use this type of interface. Actually, for the TIS the base address has been hard coded as well.
The idea would be to hide the actual address from the OS. Let the OS go through the ACPI methods only, and keep the ACPI constants in sync with the device model.
(4) in the generated ACPI payload, adhere to the compat property (i.e., generate the base address values from the compat prop),
(5) expose the base address stand-alone in a new fw_cfg file as well.
Benefits as I see it:
- register block can move around from one QEMU release to next,
Why would we need that?
It's not a requirement that I'm presenting -- I took the requirement as a given and attempted to satisfy it.
fed4_0000 is presumably reserved for TPM device interfaces and shouldn't clash with anything in the future. With the PPI memory at ffff_0000 - ffff_00ffI am not so sure. Here we could use the proposed QEMU ACPI table and a hard-coded address, ffff_0000 at the beginning. Would that not solve it? Why not?
- migration remains functional (ACPI comes from source host, but it
matches the device model on the target host, due to the compat prop),
- firmware remains dumb about TPM activations (OS calls ACPI calls
Linux doesn't use the ACPI interface from what I can tell.
What are 'TPM activations'?
I coined this expression for "interacting with the TPM device". I used this expression because the TPM ACPI spec uses the expression "activation methods" for describing the various ways to interact with the device (TIS, CRB, ACPI, ACPI+CRB are four methods that we've been discussing).
So above I meant that the firmware does not participate in OS->TPM requests.
We have a TIS interface for example that SeaBIOS uses to initialize the TPM1.2 / TPM2.
- the ACPI-to-hardware interface is dictated by an industry spec, so we
Do you have a pointer to this spec?
I simply meant that a TIS client would have to be written in AML (generated by QEMU). To the OS the device would be available via ACPI or ACPI+CRB activation, but to the ACPI implementation itself, it would look like a TIS or CRB device, with a moveable base address. This way the OS would be separated from the base address (because the OS would have to go through ACPI), and the firmware could reuse existent TIS drivers with hopefully minimal customization (base address taken from fw_cfg).
So, by the above industry spec, I simply meant the TIS interface.
Anyway, based on your description, there's a disconnect between the Linux guest and the base address movability requirement:
- we have four activation methods: TIS+Cancel, CRB, ACPI, ACPI+CRB - of this, Linux only supports the first two (TIS+Cancel, CRB), IIUC - in addition, Linux hard-codes the MMIO base address for both TIS+Cancel and CRB (at the spec-given address) - Windows cannot consume TIS+Cancel directly (according to research done by Marc-André, if I understand correctly), but it supports CRB, ACPI, ACPI+CRB - so the intersection is "CRB with hard-coded MMIO base address".
don't have to invent and document a paravirtual interface. If it ever becomes necessary for the firmware to directly access the TPM hardware (for example, to replay physical presence commands queued by the OS), fw can rely on the same industry spec, only the base address has to be updated -- which is available stand-alone from the named fw_cfg file.