SeaBIOS

seabios@seabios.org

10 participants
3770 discussions

too big seabios (1MB)
by Rudolf Marek 09 Mar '10

09 Mar '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, With debian unstable binutils 2.18 and 2.20 I always get quite big bios.bin.elf Image. I believe it is because rom.o has alignes for 2**21 Yes this is default align on AMD64. out/rom.o: file format elf32-i386 out/rom.o architecture: i386, flags 0x00000112: EXEC_P, HAS_SYMS, D_PAGED start address 0x000fdf9d Program Header: LOAD off 0x000ef000 vaddr 0x000ef000 paddr 0x000ef000 align 2**21 filesz 0x00011000 memsz 0x00011000 flags r-x Not sure how to fix it? I tried adding . = ALIGN(4096) to the linker script but it complains about truncated relocs. Rudolf -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkuSY+8ACgkQ3J9wPJqZRNUGsACcCOaux4C6Y3MEtPR+qe9sVS9A h+MAoLn33J7XzcZUrPq5Dif2X5MxSl4h =I7RK -----END PGP SIGNATURE-----

3 3

some USB/VGA success story
by Rudolf Marek 06 Mar '10

06 Mar '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I managed to compile seabios on 32 bit host. I tested it on following hw: Asus M2V-MX SE (K8M890/VT8237S) + coreboot Bus 005 Device 002: ID 1e3d:6025 Bus 002 Device 004: ID 04f2:0116 Chicony Electronics Co., Ltd KU-2971 German Keyboard Bus 002 Device 005: ID 0430:0005 Sun Microsystems, Inc. Type 6 Keyboard It has UHCI and EHCI the USB stick was EHCI connected. In summary, USB keyboard works! Both of them, autorepeat is working too. The only minor thing I could not use them BOTH connected ;) USB booting works too! I booted from USB stick the FreeDOS, USB keyboard still worked :) !!! And to make it even more fancy, I used the vgabios.bin from the SeaBIOS. (marked in CBFS as pci1106,3230.rom) Because Luc did the VGA init in the Coreboot of the Chrome9 VGA, the legacy VGA does work with legacy SeaBIOS option rom ;) There is some glitch that part of the image contain old data during some editing experiments in grub, but maybe just page switching is not correct? Dont know. But it was usable :) Rudolf -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkuSbYgACgkQ3J9wPJqZRNUVJwCgvBnMpAlhosXZ7F2TSL9Ff6yp c80AoJv1evpcd/zMc70NZgteDwX3Zo1C =HHir -----END PGP SIGNATURE-----

1 0

Re: [SeaBIOS] [Qemu-devel] SeaBIOS error with Juniper FreeBSD kernel
by Kevin O'Connor 04 Mar '10

04 Mar '10

I'm CC'ing the seabios list. On Wed, Mar 03, 2010 at 12:05:52PM +0200, Gleb Natapov wrote: > On Mon, Mar 01, 2010 at 07:09:56PM -0500, Kevin O'Connor wrote: > > On Mon, Mar 01, 2010 at 05:36:24PM +0800, Keen Shoes wrote: > > > Hi, Gleb > > > The tested bios, both 0.5.0 and 0.5.1 was downloaded from > > > here.http://linuxtogo.org/~kevin/SeaBIOS/. > > > And the 0.5.0 works well, while bios.0.5.1 failed to boot the > > > same JunOS images. By my experience, the same problem occured on > > > most of JunOS version, tested on 8.5, 9.3 and 9.6. > > > > The 0.5.0 release is very recent, I don't see any significant changes > > in smbios since that time. Going through the bisect process would > > help a lot here. > > > Bisect points to fb214dc70aaeb7b4bbaf270bb9566843a0606933 and I > confirmed manually that one commit before that works, _but_ > reverting this commit from master doesn't help. This indicates to me there is an indirect failure occuring -- something reading memory that it shouldn't. I'd guess random changes in the build are tickling the behavior. It would exmplain why Anthony's 0.5.0 fails while my 0.5.0 is okay, and why disabling SMBIOS fixes it for Brandon. -Kevin

1 0

Re: [SeaBIOS] brltty and seabios
by Kevin O'Connor 02 Mar '10

02 Mar '10

I'm CC'ing the SeaBIOS list. On Mon, Mar 01, 2010 at 09:01:03AM -0500, Miguel Ross wrote: > Hi Kevin, > I want to know if it is possible to integrate usb braille display > drivers that blind can access bios. > That's a good question. SeaBIOS has support for USB devices, but I don't know what supporting a braille device would entail. SeaBIOS doesn't write much to the screen - just the welcome banner and the boot menu - though I imagine it would be useful if someone wanted to select a different boot device. -Kevin

1 0

running vga bios on resume from S3
by Gleb Natapov 01 Mar '10

01 Mar '10

Shouldn't we make CONFIG_S3_RESUME_VGA_INIT=1 by default. Otherwise console doesn't work on Linux after resume. -- Gleb.

3 5

[PATCH] Seabios e820 reservation portion
by Jes Sorensen 21 Feb '10

21 Feb '10

Hi, This is the Seabios part to match my e820 reservation via fw_cfg patch. Cheers, Jes

2 3

[PATCH] USB HID does not support Set_Idle
by Kevin O'Connor 19 Feb '10

19 Feb '10

I found that the QEMU USB keyboard support does not work properly with the Set_Idle command. Once a non-zero value is given to Set_Idle, then the keyboard reports an event on every poll - not based on the time issued in the Set_Idle command. I changed the code (see patch below) and it works for me. I'm not that familiar with the qemu internals, so I'm not sure if this is the best way to implement this feature. -Kevin diff --git a/hw/usb-hid.c b/hw/usb-hid.c index 4f320d7..bf456bb 100644 --- a/hw/usb-hid.c +++ b/hw/usb-hid.c @@ -66,6 +66,7 @@ typedef struct USBHIDState { int kind; int protocol; uint8_t idle; + int64_t next_idle_clock; int changed; void *datain_opaque; void (*datain)(void *); @@ -630,6 +631,11 @@ static void usb_keyboard_handle_reset(USBDevice *dev) s->protocol = 1; } +static void usb_hid_set_next_idle(USBHIDState *s, int64_t curtime) +{ + s->next_idle_clock = curtime + (get_ticks_per_sec() * s->idle * 4) / 1000; +} + static int usb_hid_handle_control(USBDevice *dev, int request, int value, int index, int length, uint8_t *data) { @@ -795,6 +801,7 @@ static int usb_hid_handle_control(USBDevice *dev, int request, int value, break; case SET_IDLE: s->idle = (uint8_t) (value >> 8); + usb_hid_set_next_idle(s, qemu_get_clock(vm_clock)); ret = 0; break; default: @@ -813,9 +820,10 @@ static int usb_hid_handle_data(USBDevice *dev, USBPacket *p) switch(p->pid) { case USB_TOKEN_IN: if (p->devep == 1) { - /* TODO: Implement finite idle delays. */ - if (!(s->changed || s->idle)) + int64_t curtime = qemu_get_clock(vm_clock); + if (!s->changed && (!s->idle || s->next_idle_clock - curtime > 0)) return USB_RET_NAK; + usb_hid_set_next_idle(s, curtime); s->changed = 0; if (s->kind == USB_MOUSE) ret = usb_mouse_poll(s, p->data, p->len);

2 1

[PATCH 0/8] Add USB disk booting support
by Kevin O'Connor 18 Feb '10

18 Feb '10

This patch series adds the ability to boot from USB flash drives. The first seven patches are just cleanups. The eighth adds the MSC support. This is only preliminary support - I've booted under qemu using a "-usbdevice disk:foo" drive, and I've also booted my epia-cn with seabios and coreboot. However, handling of error conditions and timers still needs to be improved. Also, the current support is UHCI only (no ohci). Further testing on real hardware would be appreciated. -Kevin Kevin O'Connor (8): Dynamically allocate each drive_g with malloc_fseg(). Move common "command data block" functions to new file blockcmd.c. Don't require a valid physical cylinders/heads/spt for logical mapping. Fix off by one error in strtcpy. Minor - arrange struct drive_s to clarify field roles. USB UHCI cleanups. Introduce helper functions for finding USB end-points. Initial support for booting from USB drives. Makefile | 4 +- src/ata.c | 36 +++----- src/biosvar.h | 6 +- src/block.c | 69 ++++++--------- src/blockcmd.c | 78 +++++++++++++++++ src/blockcmd.h | 19 ++++ src/boot.c | 2 +- src/cdrom.c | 69 ++++----------- src/config.h | 6 +- src/disk.h | 33 +++---- src/floppy.c | 7 +- src/usb-hid.c | 26 ++---- src/usb-msc.c | 261 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ src/usb-msc.h | 25 ++++++ src/usb-uhci.c | 142 +++++++++++++++++++++++++++++-- src/usb-uhci.h | 4 +- src/usb.c | 81 +++++++++++++++++- src/usb.h | 6 ++ src/util.c | 2 +- 19 files changed, 706 insertions(+), 170 deletions(-) create mode 100644 src/blockcmd.c create mode 100644 src/usb-msc.c create mode 100644 src/usb-msc.h

2 10

compiling a working Seabios
by Greg Ungerer 18 Feb '10

18 Feb '10

Hi All, I have an Intel/Truxton (Tolapai/EP80579) type platform that I am using coreboot and seabios on. Up to now I have been using a pre-compiled binary from Kevin's download site: http://linuxtogo.org/~kevin/SeaBIOS/seabios-0.5.1.tar.gz and that has been working fine. (The coreboot is modified to support some changes on this particular hardware platform). Now the problem is that I want to generate seabios binaries from source. And I can't seem to be able to compile a working one. My host build system is a Ubuntu 9.10 x86_64 install (using the most up to date packages). This a gcc-4.4.1 and binutils-2.20 setup. If I get the source seabios-0.5.1 package from Kevin's download page and compile that I end up with a bios.bin.elf that is: -rwxr-xr-x 1 gerg gerg 1048716 2010-02-17 15:11 bios.bin.elf Hmm, rather large :-) The actual contents maybe ok: out/bios.bin.elf: file format elf32-i386 Sections: Idx Name Size VMA LMA File off Algn 0 .text 00013000 000ed000 000ed000 000ed000 2**4 CONTENTS, ALLOC, LOAD, READONLY, CODE The file offset is looking bad here. If I instead use a binutils-2.18 "ld" that I have lying around (doing "make LD=i386-linux-ld") then I end up with a more reasonable sized bios.bin.elf of 82060 bytes. But this bios.bin.elf just hangs after being loaded by coreboot on my target. I tried compiling this same seabios version (0.5.1) on an older Fedora Core 9 system (also an x86_64 install), and again that produced a non-working bios.bin.elf. I also got the latest seabios git tree and tried that. I also couldn't get a working seabios binary using that either. What versions of gcc/binutils do others use? Does anyone have any ideas where by building could be going wrong? Regards Greg ------------------------------------------------------------------------ Greg Ungerer -- Principal Engineer EMAIL: gerg(a)snapgear.com SnapGear Group, McAfee PHONE: +61 7 3435 2888 8 Gardner Close FAX: +61 7 3217 5323 Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com

3 3

[PATCH] Add common "block command" definitions and update cdrom code.
by Kevin O'Connor 16 Feb '10

16 Feb '10

Add common "block command" definitions and update cdrom code. Introduce standard definitions and names for the "command data block" commands used in the cdrom code. diff --git a/src/ata.c b/src/ata.c index ed7ef28..a27da56 100644 --- a/src/ata.c +++ b/src/ata.c @@ -17,6 +17,7 @@ #include "boot.h" // add_bcv_hd #include "disk.h" // struct ata_s #include "ata.h" // ATA_CB_STAT +#include "blockcmd.h" // CDB_CMD_READ_10 #define IDE_TIMEOUT 32000 //32 seconds max for IDE ops @@ -596,9 +597,11 @@ process_ata_op(struct disk_op_s *op) * ATAPI functions ****************************************************************/ +#define CDROM_CDB_SIZE 12 + // Low-level atapi command transmit function. -static int -atapi_cmd_data(struct disk_op_s *op, u8 *cmdbuf, u8 cmdlen, u16 blocksize) +int +atapi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) { u8 ataid = GET_GLOBAL(op->drive_g->cntl_id); u8 channel = ataid / 2; @@ -622,7 +625,7 @@ atapi_cmd_data(struct disk_op_s *op, u8 *cmdbuf, u8 cmdlen, u16 blocksize) goto fail; // Send command to device - outsw_fl(iobase1, MAKE_FLATPTR(GET_SEG(SS), cmdbuf), cmdlen / 2); + outsw_fl(iobase1, MAKE_FLATPTR(GET_SEG(SS), cdbcmd), CDROM_CDB_SIZE / 2); int status = pause_await_not_bsy(iobase1, iobase2); if (status < 0) { @@ -657,17 +660,12 @@ fail: int cdrom_read(struct disk_op_s *op) { - u8 atacmd[12]; - memset(atacmd, 0, sizeof(atacmd)); - atacmd[0]=0x28; // READ command - atacmd[7]=(op->count & 0xff00) >> 8; // Sectors - atacmd[8]=(op->count & 0x00ff); - atacmd[2]=(op->lba & 0xff000000) >> 24; // LBA - atacmd[3]=(op->lba & 0x00ff0000) >> 16; - atacmd[4]=(op->lba & 0x0000ff00) >> 8; - atacmd[5]=(op->lba & 0x000000ff); - - return atapi_cmd_data(op, atacmd, sizeof(atacmd), CDROM_SECTOR_SIZE); + struct cdb_rwdata_10 cmd; + memset(&cmd, 0, sizeof(cmd)); + cmd.command = CDB_CMD_READ_10; + cmd.lba = htonl(op->lba); + cmd.count = htons(op->count); + return atapi_cmd_data(op, &cmd, CDROM_SECTOR_SIZE); } // 16bit command demuxer for ATAPI cdroms. @@ -689,20 +687,6 @@ process_atapi_op(struct disk_op_s *op) } } -// Send a simple atapi command to a drive. -int -ata_cmd_packet(struct drive_s *drive_g, u8 *cmdbuf, u8 cmdlen - , u32 length, void *buf_fl) -{ - struct disk_op_s dop; - memset(&dop, 0, sizeof(dop)); - dop.drive_g = drive_g; - dop.count = 1; - dop.buf_fl = buf_fl; - - return atapi_cmd_data(&dop, cmdbuf, cmdlen, length); -} - /**************************************************************** * ATA detect and init diff --git a/src/ata.h b/src/ata.h index d217280..ede5f17 100644 --- a/src/ata.h +++ b/src/ata.h @@ -15,8 +15,7 @@ struct ata_channel_s { // ata.c extern struct ata_channel_s ATA_channels[CONFIG_MAX_ATA_INTERFACES]; int cdrom_read(struct disk_op_s *op); -int ata_cmd_packet(struct drive_s *drive_g, u8 *cmdbuf, u8 cmdlen - , u32 length, void *buf_fl); +int atapi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize); void ata_setup(void); int process_ata_op(struct disk_op_s *op); int process_atapi_op(struct disk_op_s *op); @@ -144,6 +143,4 @@ void describe_atapi(struct drive_s *drive_g); #define ATA_CMD_READ_NATIVE_MAX_ADDRESS 0xF8 #define ATA_CMD_SET_MAX 0xF9 -#define ATA_CMD_REQUEST_SENSE 0x03 - #endif // ata.h diff --git a/src/blockcmd.h b/src/blockcmd.h new file mode 100644 index 0000000..28a4889 --- /dev/null +++ b/src/blockcmd.h @@ -0,0 +1,58 @@ +// Definitions for SCSI style command data blocks. +#ifndef __BLOCKCMD_H +#define __BLOCKCMD_H + +#include "types.h" // u8 + +#define CDB_CMD_READ_10 0x28 +#define CDB_CMD_VERIFY_10 0x2f +#define CDB_CMD_WRITE_10 0x2a + +struct cdb_rwdata_10 { + u8 command; + u8 flags; + u32 lba; + u8 resreved_06; + u16 count; + u8 reserved_09; + u8 pad[6]; +} PACKED; + +#define CDB_CMD_READ_CAPACITY 0x25 + +struct cdb_read_capacity { + u8 command; + u8 flags; + u8 resreved_02[8]; + u8 pad[6]; +} PACKED; + +struct cdbres_read_capacity { + u32 sectors; + u32 blksize; +} PACKED; + +#define CDB_CMD_REQUEST_SENSE 0x03 + +struct cdb_request_sense { + u8 command; + u8 flags; + u16 reserved_02; + u8 length; + u8 reserved_05; + u8 pad[10]; +} PACKED; + +struct cdbres_request_sense { + u8 errcode; + u8 segment; + u8 flags; + u32 info; + u8 additional; + u32 specific; + u8 asc; + u8 ascq; + u32 reserved_0e; +} PACKED; + +#endif // blockcmd.h diff --git a/src/cdrom.c b/src/cdrom.c index 883bffa..4e70729 100644 --- a/src/cdrom.c +++ b/src/cdrom.c @@ -10,6 +10,7 @@ #include "bregs.h" // struct bregs #include "biosvar.h" // GET_EBDA #include "ata.h" // ATA_CMD_REQUEST_SENSE +#include "blockcmd.h" // CDB_CMD_REQUEST_SENSE /**************************************************************** @@ -167,6 +168,8 @@ cdemu_134b(struct bregs *regs) if (regs->al == 0x00) { // FIXME ElTorito Various. Should be handled accordingly to spec SET_EBDA2(ebda_seg, cdemu.active, 0x00); // bye bye + + // XXX - update floppy/hd count. } disk_ret(regs, DISK_RET_SUCCESS); @@ -179,47 +182,47 @@ cdemu_134b(struct bregs *regs) // Request SENSE static int -atapi_get_sense(struct drive_s *drive_g, u8 *asc, u8 *ascq) +atapi_get_sense(struct disk_op_s *op, u8 *asc, u8 *ascq) { - u8 atacmd[12], buffer[18]; - memset(atacmd, 0, sizeof(atacmd)); - atacmd[0] = ATA_CMD_REQUEST_SENSE; - atacmd[4] = sizeof(buffer); - int ret = ata_cmd_packet(drive_g, atacmd, sizeof(atacmd), sizeof(buffer) - , MAKE_FLATPTR(GET_SEG(SS), buffer)); + struct cdb_request_sense cmd; + struct cdbres_request_sense data; + memset(&cmd, 0, sizeof(cmd)); + cmd.command = CDB_CMD_REQUEST_SENSE; + cmd.length = sizeof(data); + op->count = 1; + op->buf_fl = &data; + int ret = atapi_cmd_data(op, &cmd, sizeof(data)); if (ret) return ret; - *asc = buffer[12]; - *ascq = buffer[13]; - + *asc = data.asc; + *ascq = data.ascq; return 0; } // Request capacity static int -atapi_read_capacity(struct drive_s *drive_g, u32 *blksize, u32 *sectors) +atapi_read_capacity(struct disk_op_s *op, u32 *blksize, u32 *sectors) { - u8 packet[12], buf[8]; - memset(packet, 0, sizeof(packet)); - packet[0] = 0x25; /* READ CAPACITY */ - int ret = ata_cmd_packet(drive_g, packet, sizeof(packet), sizeof(buf) - , MAKE_FLATPTR(GET_SEG(SS), buf)); + struct cdb_read_capacity cmd; + struct cdbres_read_capacity data; + memset(&cmd, 0, sizeof(cmd)); + cmd.command = CDB_CMD_READ_CAPACITY; + op->count = 1; + op->buf_fl = &data; + int ret = atapi_cmd_data(op, &cmd, sizeof(data)); if (ret) return ret; - *blksize = (((u32)buf[4] << 24) | ((u32)buf[5] << 16) - | ((u32)buf[6] << 8) | ((u32)buf[7] << 0)); - *sectors = (((u32)buf[0] << 24) | ((u32)buf[1] << 16) - | ((u32)buf[2] << 8) | ((u32)buf[3] << 0)); - + *blksize = ntohl(data.blksize); + *sectors = ntohl(data.sectors); return 0; } static int -atapi_is_ready(struct drive_s *drive_g) +atapi_is_ready(struct disk_op_s *op) { - dprintf(6, "atapi_is_ready (drive=%p)\n", drive_g); + dprintf(6, "atapi_is_ready (drive=%p)\n", op->drive_g); /* Retry READ CAPACITY for 5 seconds unless MEDIUM NOT PRESENT is * reported by the device. If the device reports "IN PROGRESS", @@ -233,13 +236,13 @@ atapi_is_ready(struct drive_s *drive_g) return -1; } - int ret = atapi_read_capacity(drive_g, &blksize, &sectors); + int ret = atapi_read_capacity(op, &blksize, &sectors); if (!ret) // Success break; u8 asc, ascq; - ret = atapi_get_sense(drive_g, &asc, &ascq); + ret = atapi_get_sense(op, &asc, &ascq); if (ret) // Error - retry. continue; @@ -259,7 +262,7 @@ atapi_is_ready(struct drive_s *drive_g) } } - if (blksize != GET_GLOBAL(drive_g->blksize)) { + if (blksize != GET_GLOBAL(op->drive_g->blksize)) { printf("Unsupported sector size %u\n", blksize); return -1; } @@ -272,19 +275,18 @@ atapi_is_ready(struct drive_s *drive_g) int cdrom_boot(int cdid) { - struct drive_s *drive_g = getDrive(EXTTYPE_CD, cdid); - if (!drive_g) + struct disk_op_s dop; + memset(&dop, 0, sizeof(dop)); + dop.drive_g = getDrive(EXTTYPE_CD, cdid); + if (!dop.drive_g) return 1; - int ret = atapi_is_ready(drive_g); + int ret = atapi_is_ready(&dop); if (ret) dprintf(1, "atapi_is_ready returned %d\n", ret); // Read the Boot Record Volume Descriptor u8 buffer[2048]; - struct disk_op_s dop; - memset(&dop, 0, sizeof(dop)); - dop.drive_g = drive_g; dop.lba = 0x11; dop.count = 1; dop.buf_fl = MAKE_FLATPTR(GET_SEG(SS), buffer); @@ -325,7 +327,7 @@ cdrom_boot(int cdid) u8 media = buffer[0x21]; SET_EBDA2(ebda_seg, cdemu.media, media); - SET_EBDA2(ebda_seg, cdemu.emulated_drive, ADJUST_GLOBAL_PTR(drive_g)); + SET_EBDA2(ebda_seg, cdemu.emulated_drive, ADJUST_GLOBAL_PTR(dop.drive_g)); u16 boot_segment = *(u16*)&buffer[0x22]; if (!boot_segment) @@ -362,6 +364,7 @@ cdrom_boot(int cdid) if (media < 4) { // Floppy emulation SET_EBDA2(ebda_seg, cdemu.emulated_extdrive, 0x00); + // XXX - get and set actual floppy count. SETBITS_BDA(equipment_list_flags, 0x41); switch (media) {

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

SeaBIOS