SeaBIOS June 2024

seabios@seabios.org

8 participants
6 discussions

[PATCH v2 1/4] add debug when we set pci_pad_mem64
by John Levon 14 Nov '24

14 Nov '24

This is an interesting enough setting to add a dprintf() for. Signed-off-by: John Levon <john.levon(a)nutanix.com> --- src/fw/pciinit.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c index bb44dc29..0395fdbf 100644 --- a/src/fw/pciinit.c +++ b/src/fw/pciinit.c @@ -1197,8 +1197,10 @@ pci_setup(void) } } - if (CPUPhysBits >= 36 && CPULongMode && RamSizeOver4G) + if (CPUPhysBits >= 36 && CPULongMode && RamSizeOver4G) { + dprintf(1, "enabling 64-bit pci mmio window\n"); pci_pad_mem64 = 1; + } dprintf(1, "=== PCI bus & bridge init ===\n"); if (pci_probe_host() != 0) { -- 2.34.1

8 32

[PATCH] limit address space used for pci devices, part two
by Gerd Hoffmann 24 Jun '24

24 Jun '24

This patch changes the logic added by commit a6ed6b701f0a ("limit address space used for pci devices.") a bit. Further testing showed that the limit of 46 phys-bits applies to x86_64 kernels only, for i386 kernels the limit is 44. So change the limit from 46 to 44 for better compatibility with i386 guests. Also add one more condition to refine the configuration heuristic: Apply the limit only in case the guest has less than 1 TB of memory installed, so huge guests run without address space limits. Signed-off-by: Gerd Hoffmann <kraxel(a)redhat.com> --- src/fw/pciinit.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c index bb44dc296047..b3e359d7fe62 100644 --- a/src/fw/pciinit.c +++ b/src/fw/pciinit.c @@ -1189,11 +1189,16 @@ pci_setup(void) if (CPUPhysBits) { pci_mem64_top = 1LL << CPUPhysBits; - if (CPUPhysBits > 46) { - // Old linux kernels have trouble dealing with more than 46 - // phys-bits, so avoid that for now. Seems to be a bug in the - // virtio-pci driver. Reported: centos-7, ubuntu-18.04 - pci_mem64_top = 1LL << 46; + if (CPUPhysBits > 44) { + // Old linux kernels have trouble dealing with more than 44 (i386 + // kernels) or 46 (x86_64 kernels) phys-bits. Seems to be a bug in + // the virtio-pci driver. + // Reported: centos-7, ubuntu-18.04 + // Limit the used address space to mitigate the bug, except we are + // running in a huge guest with more than 1TB of memory installed. + if (RamSizeOver4G < (1LL << 40)) { + pci_mem64_top = 1LL << 44; + } } } -- 2.45.2

4 3

[PATCH 1/4] add debug when we set pci_pad_mem64
by John Levon 24 Jun '24

24 Jun '24

This is an interesting enough setting to add a dprintf() for. Signed-off-by: John Levon <john.levon(a)nutanix.com> --- src/fw/pciinit.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c index bb44dc29..9ad4e41a 100644 --- a/src/fw/pciinit.c +++ b/src/fw/pciinit.c @@ -1197,8 +1197,10 @@ pci_setup(void) } } - if (CPUPhysBits >= 36 && CPULongMode && RamSizeOver4G) + if (CPUPhysBits >= 36 && CPULongMode && RamSizeOver4G) { + dprintf(1, "setting pci_pad_mem64=1\n"); pci_pad_mem64 = 1; + } dprintf(1, "=== PCI bus & bridge init ===\n"); if (pci_probe_host() != 0) { -- 2.34.1

5 19

no cert for git.seabios.org
by Michael Tokarev 16 Jun '24

16 Jun '24

FWIW, git.seabios.org can't be contacted anymore: $ git remote -v upstream https://git.seabios.org/seabios.git (fetch) upstream https://git.seabios.org/seabios.git (push) $ git remote update upstream Fetching upstream fatal: unable to access 'https://git.seabios.org/seabios.git/': gnutls_handshake() failed: The server name sent was not recognized error: could not fetch upstream Firefox shows SSL_ERROR_UNRECOGNIZED_NAME_ALERT error when trying https://git.seabios.org/ Thanks, /mjt -- GPG Key transition (from rsa2048 to rsa4096) since 2024-04-24. New key: rsa4096/61AD3D98ECDF2C8E 9D8B E14E 3F2A 9DD7 9199 28F1 61AD 3D98 ECDF 2C8E Old key: rsa2048/457CE0A0804465C5 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 Transition statement: http://www.corpit.ru/mjt/gpg-transition-2024.txt

1 0

Regression 32bit Kernel + Virtio-scsi
by Max Tottenham 13 Jun '24

13 Jun '24

Hi Folks The commits between be848676..a6ed6b701 appear to break QEMU guests using a 32bit kernel when booting from virtio_scsi devices. I end up seeing the following in dmesg: [ 2.016642] virtio_scsi: probe of virtio0 failed with error -2 Notably - I've tried modifying the amount of RAM the geust boots with, based on the comments in the commit messages, PAE *is* also enabled in the guest kernel (the kernel v6.1.76). qemu-system-x86_64 .... -m 2048M - Guest boots fine qemu-system-x86_64 .... -m 4095M - Guest does not boot. In the latter case I still see the 64 bit address space being used in the BIOS debug log in the latter case: 00.006: === PCI bus & bridge init === 00.006: PCI: pci_bios_init_bus_rec bus = 0x0 00.007: === PCI device probing === 00.007: Found 8 PCI devices (max PCI bus is 00) 00.008: PCIe: using q35 mmconfig at 0xb0000000 00.008: === PCI new allocation pass #1 === 00.008: PCI: check devices 00.009: === PCI new allocation pass #2 === 00.009: PCI: IO: c000 - c11f 00.009: PCI: 32: 00000000c0000000 - 00000000fec00000 00.009: PCI: 64: 0000380000000000 - 0000380040000000 00.009: PCI: map device bdf=00:02.0 bar 4, addr 380000000000, size 00004000 [prefmem] 00.010: PCI: map device bdf=00:03.0 bar 4, addr 380000004000, size 00004000 [prefmem] 00.010: PCI: map device bdf=00:04.0 bar 4, addr 380000008000, size 00004000 [prefmem] 00.010: PCI: map device bdf=00:02.0 bar 0, addr 0000c000, size 00000040 [io] 00.011: PCI: map device bdf=00:03.0 bar 0, addr 0000c040, size 00000040 [io] 00.011: PCI: map device bdf=00:04.0 bar 0, addr 0000c080, size 00000040 [io] 00.011: PCI: map device bdf=00:1f.3 bar 4, addr 0000c0c0, size 00000040 [io] 00.011: PCI: map device bdf=00:1f.2 bar 4, addr 0000c100, size 00000020 [io] 00.012: PCI: map device bdf=00:04.0 bar 6, addr feb80000, size 00040000 [mem] 00.012: PCI: map device bdf=00:01.0 bar 6, addr febc0000, size 00010000 [mem] 00.012: PCI: map device bdf=00:01.0 bar 2, addr febd0000, size 00001000 [mem] 00.012: PCI: map device bdf=00:02.0 bar 1, addr febd1000, size 00001000 [mem] 00.013: PCI: map device bdf=00:03.0 bar 1, addr febd2000, size 00001000 [mem] 00.013: PCI: map device bdf=00:04.0 bar 1, addr febd3000, size 00001000 [mem] 00.013: PCI: map device bdf=00:1f.2 bar 5, addr febd4000, size 00001000 [mem] 00.013: PCI: map device bdf=00:01.0 bar 0, addr fd000000, size 01000000 [prefmem] 00.014: PCI: init bdf=00:00.0 id=8086:29c0 00.014: PCI: init bdf=00:01.0 id=1234:1111 00.014: PCI: init bdf=00:02.0 id=1af4:1004 00.015: PCI: init bdf=00:03.0 id=1af4:1004 00.016: PCI: init bdf=00:04.0 id=1af4:1000 I'm happy to help test/provide more logs if they are useful. -- Max Tottenham | Senior Software Engineer /(* Akamai Technologies

3 7

Keyboard typematic rate and delay
by Eduardo Batalha 11 Jun '24

11 Jun '24

Hi, There is a UK based retro enthusiast named Andy who goes by the name rasteri or therastery in different social media networks. He is famous in the circle for his hardware hacks and creations. One of these is called the HIDMan [1], which is a USB mouse/keyboard to PS2/RS232 converter. Andy approached the wider community to get comments and to get volunteers to test the device on the VOGONS [2] forum. On page 9 of the topic, another user (Eivind) is trying to test if he can change the keyboard typematic rate and delay from Freedos using the MODE CON RATE=xx DELAY=xx command only to conclude that he cannot do it because the function [4] that passes the values to the keyboard controller [5] in the keyboard is not implemented [6] in the Seabios based computer that he is using. This is obviously a very obscure and edge case as far as Seabios is concerned, probably not worth the effort to fix but it is, anyway, interesting as it highlights the issue that the users expected a certain BIOS function to be available and it was not. There are probably others... Maybe it would be nice to have a TODO file somewhere in the documentation highlighting issues like these, which could also serve as a guide to potential new contributors. Cheers, Eduardo [1] https://github.com/rasteri/HIDman [2] https://www.vogons.org/viewtopic.php?f=24&t=89777 [3] https://www.vogons.org/viewtopic.php?f=24&t=89777&start=160 [4] http://www.techhelpmanual.com/232-int_16h_03h__set_keyboard_typematic_rate_… [5] https://github.com/Halicery/8042/blob/main/8048_AT_INTERN.TEXT [6] https://review.coreboot.org/plugins/gitiles/seabios/+/refs/heads/master/src…

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

SeaBIOS June 2024