SeaBIOS June 2019

seabios@seabios.org

11 participants
21 discussions

[PATCH] advanced_bootmenu: up to 35 entries (2 pages if >18), numpad support (console)
by Mike Banon 25 Apr '20

25 Apr '20

Add support for up to 35 boot menu entries (2 pages if >18). To solve the ">10" problem currently experienced by SeaBIOS users (there are no 11, 12, etc. keys on a keyboard - so impossible to choose the last menu entries if you got >10 entries because of multiple hard drives / secondary payloads / floppies) - the boot menu has been extended to the letter keys. NOTE: TPM menu has been moved from T to M letter: it is at the end of keyboard's 3rd row of letters and "Trusted" is adjective while "Module" is a noun; alternatively could press '-'. Also, add support for a numpad. Small USB numpad could be really convenient for choosing the boot entries at coreboot boards used as (maybe headless) servers. '/' char on numpad could be used to open the boot menu or to exit it. If there are >10 boot menu entries - the numpad console interface will be enabled: press one or two digit keys and then ENTER to confirm your choice, or remove a digit by pressing the '.Del' key. Also you could call TPM with '-' key at any moment, or boot with a single key press of your fullsize keyboard. Signed-off-by: Mike Banon <mikebdp2 at gmail.com> (patch body is after the testing instructions below) This "advanced_bootmenu" patch is much more useful when used together with my "multiple_floppies" patch: [SeaBIOS] [PATCH v2] ramdisk: search for all available floppy images instead of one https://mail.coreboot.org/pipermail/seabios/2018-December/012670.html Sadly I haven't done the suggestions by Kevin (I have so many unfinished tasks) so the "multiple_floppies" patch is also not merged yet. But you could install both patches to your coreboot by executing this script while at ./coreboot dir: https://pastebin.com/raw/hv9sSuMU And here is a coreboot image for QEMU with these two patches applied and my collection of wonderful and useful floppies added to popular the entries list: https://github.com/mikebdp2/floparchive/blob/master/coreboot.rom?raw=true Descriptions of the most prominent floppies could be found here: http://dangerousprototypes.com/docs/Lenovo_G505S_hacking#Useful_floppies Run this coreboot.rom by executing this QEMU command: (some floppies are 64-bit) qemu-system-x86_64 -L . -m 768 -localtime -vga vmware -net nic,model=rtl8139 \ -net user -soundhw ac97 -bios ./coreboot.rom -boot menu=on -serial stdio Best regards, Mike Banon diff --git a/src/boot.c b/src/boot.c index 9f82f3c..f94dd27 100644 --- a/src/boot.c +++ b/src/boot.c @@ -463,6 +463,7 @@ get_keystroke(int msec) * Boot menu and BCV execution ****************************************************************/ +#define BOOTMENU_PAGE_SIZE 18 #define DEFAULT_BOOTMENU_WAIT 2500 // Show IPL option menu. @@ -478,59 +479,282 @@ interactive_bootmenu(void) ; char *bootmsg = romfile_loadfile("etc/boot-menu-message", NULL); - int menukey = romfile_loadint("etc/boot-menu-key", 1); - printf("%s", bootmsg ?: "\nPress ESC for boot menu.\n\n"); + int menukey = romfile_loadint("etc/boot-menu-key", 1); // custom menukey + printf("%s", bootmsg ?: "\nPress ESC or \\ / slash for boot menu.\n\n"); free(bootmsg); u32 menutime = romfile_loadint("etc/boot-menu-wait", DEFAULT_BOOTMENU_WAIT); enable_bootsplash(); int scan_code = get_keystroke(menutime); disable_bootsplash(); - if (scan_code != menukey) + if (scan_code != menukey && // custom menukey + scan_code != 1 && // ESC + scan_code != 43 && // '\' char on keyboard + scan_code != 53 && // '/' char on keyboard + scan_code != 98) { // '/' char on numpad + if (scan_code == -1) + printf("No key pressed.\n"); + else + printf("Not a menukey pressed.\n"); return; + } while (get_keystroke(0) >= 0) ; - printf("Select boot device:\n\n"); wait_threads(); - // Show menu items + char keyboard_keys[35] = {'1','2','3','4','5','6','7','8','9','0', + 'q','w','e','r','t','y','u','i','o','p', + 'a','s','d','f','g','h','j','k','l', + 'z','x','c','v','b','n'}; /* m = TPM */ + int numpad_scancodes[10] = { 82, 79, 80, 81, 75, 76, 77, 71, 72, 73 }; + int numpi = 0; // Key index: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9. + int digits = 0; // Numerical length of a current choice number. + int decode = 0; // Decode the current choice number into a letter? + int entry_id = 0; + char desc[77]; + + printf("Select boot device"); + + // Show menu items after counting them and determining a number of pages. + // Only 35 boot menu items (36 if to count a TPM) are supported currently. + int maxmenu = 0; struct bootentry_s *pos; - hlist_for_each_entry(pos, &BootList, node) { - char desc[77]; + hlist_for_each_entry(pos, &BootList, node) maxmenu++; - printf("%d. %s\n", maxmenu + + if (maxmenu > 10) { + if (maxmenu > 35) + maxmenu = 35; + if (maxmenu > BOOTMENU_PAGE_SIZE) + printf(" - page 1 :"); + else + printf(": "); + printf(" // press ENTER after your numpad input"); + if (maxmenu > BOOTMENU_PAGE_SIZE) + printf(" - if any -\n " + " // - or to switch between the pages...\n"); + else + printf(" (if any)\n\n"); + } else { + printf(":\n\n"); + } + + hlist_for_each_entry(pos, &BootList, node) { + if (entry_id == BOOTMENU_PAGE_SIZE) // Show only the first page. + break; + printf("%c. %s\n", keyboard_keys[entry_id] , strtcpy(desc, pos->description, ARRAY_SIZE(desc))); + entry_id++; } + int tpm_cshm = 0; if (tpm_can_show_menu()) { - printf("\nt. TPM Configuration\n"); + tpm_cshm = 1; + printf("\nm-. TPM Configuration"); } - - // Get key press. If the menu key is ESC, do not restart boot unless - // 1.5 seconds have passed. Otherwise users (trained by years of - // repeatedly hitting keys to enter the BIOS) will end up hitting ESC - // multiple times and immediately booting the primary boot device. - int esc_accepted_time = irqtimer_calc(menukey == 1 ? 1500 : 0); + printf("\n> "); + + // Do not restart boot on menukey press, unless DEFAULT_BOOTMENU_WAIT msecs + // have passed. Otherwise users (trained by years of repeatedly hitting keys + // to enter the BIOS) will end up hitting menukey multiple times and + // immediately booting the primary boot device. + int esc_accepted_time = irqtimer_calc(DEFAULT_BOOTMENU_WAIT); + int choice = 0, kb_choice = 0; + int page_num = 1; + int enter = 0; + int backspace = 0; + int tpm_show_menu = 0; for (;;) { scan_code = get_keystroke(1000); - if (scan_code == 1 && !irqtimer_check(esc_accepted_time)) - continue; - if (tpm_can_show_menu() && scan_code == 20 /* t */) { + if (scan_code == menukey || // custom menukey + scan_code == 1 || // ESC + scan_code == 43 || // '\' char on keyboard + scan_code == 53 || // '/' char on keyboard + scan_code == 98) { // '/' char on numpad + if (!irqtimer_check(esc_accepted_time)) + continue; + if (digits == 2) // Remove the decoded "(*)" + printf(" \b\b\b"); + /* Remove the existing input before printing a message. */ + for (; digits > 0; digits--) + printf("\b \b"); + printf("Menukey pressed.\n"); + return; + } + kb_choice = 0; + /* 4 rows of keyboard_keys: 1 row with numbers, 3 rows with letters. + Use any of them to select a boot device (except the TPM 'm-' keys) */ + // 1st range: 1-9 and 0 (10) keys <==> 2-11 scan codes <==> 1-10 choice + if (scan_code >= 2 && scan_code <= 11) kb_choice = scan_code - 1; + // 2nd range: Q-P row of letters <==> 16-25 scan codes <==> 11-20 choice + if (scan_code >= 16 && scan_code <= 25) kb_choice = scan_code - 5; + // 3rd range: A-L row of letters <==> 30-38 scan codes <==> 21-29 choice + if (scan_code >= 30 && scan_code <= 38) kb_choice = scan_code - 9; + // 4th range: Z-N row of letters <==> 44-49 scan codes <==> 30-35 choice + if (scan_code >= 44 && scan_code <= 49) kb_choice = scan_code - 14; + // ENTER: (28) on keyboard, (96) on numpad. + if (scan_code == 28 || scan_code == 96) + enter = 1; + // BCKSPC: '<-'(14) and 'Delete'(111) on keyboard, '.Del'(83) on numpad. + if (scan_code == 14 || scan_code == 111 || scan_code == 83) + backspace = 1; + // TPM keys: 'm'(50) and '-'(12) chars on keyboard, '-'(74) on numpad. + if ((scan_code == 50 || scan_code == 12 || scan_code == 74) && tpm_cshm) + tpm_show_menu = 1; + + if (kb_choice != 0 || tpm_show_menu) { + if (kb_choice > maxmenu) { + if (!tpm_show_menu) + continue; + } else { + choice = kb_choice; + } + if (digits == 2) // Remove the decoded "(*)" + printf(" \b\b\b"); + /* Remove the existing input before printing a choice. */ + for (; digits > 0; digits--) + printf("\b \b"); + if (!tpm_show_menu) { + // Choice is any of the detected boot devices ==> lets boot! + break; + } + } else { + // Internal/USB Numpad console interface. + if (digits < 9) { + for (numpi = 0; numpi < 10; numpi++) { + if (scan_code == numpad_scancodes[numpi]) { + if (maxmenu <= 10) { // Console interface is not needed. + if ((numpi != 0 && numpi <= maxmenu) || + (numpi == 0 && 10 <= maxmenu)) { // 10(0) + choice = numpi; + enter = 1; // Fake ENTER to boot this entry now. + } else { // If no such an entry, don't try to boot. + break; + } + } else { + if (digits == 2) { + printf(" \b\b\b"); // Remove the decoded "(*)" + if (choice == 0) { + printf("\b\b \b\b"); // Remove "10". + digits = 0; + } + } + choice = 10 * choice + numpi; + } + if (choice > 0) { + printf("%d", numpi); // Print the entered digit. + digits++; + } else { + if (10 <= maxmenu) + printf("10(0)\b\b\b"); + else + printf("10(?)\b\b\b"); + digits = 2; + } + if (choice > 9 && digits == 2) // Decode into a letter. + decode = 1; + break; + } + } + } + if (backspace && digits > 0) { + backspace = 0; + choice = choice / 10; + if (digits == 2) { + printf(" \b\b\b"); // Remove the decoded "(*)" + // 0 turned into 10: one more Backspace is needed to remove. + if (choice == 0) { + printf("\b \b"); + digits--; + } + } + printf("\b \b"); // Remove the last entered digit. + digits--; + if (choice > 9 && digits == 2) // Decode into a letter. + decode = 1; + } + if (decode) { // Decode the current choice number into a letter. + decode = 0; + if (choice <= maxmenu) { + printf("(%c)", keyboard_keys[choice-1]); + } else { + if (tpm_cshm && choice == 36) + printf("(m)"); // For TPM. + else + printf("(?)"); // No matching letter found. + } + printf("\b\b\b"); // Move a cursor before the "(*)" + } + } + + if (enter) { + enter = 0; + if (choice == 0) { + if (digits == 2) { // for 0 that turned into 10 + if (10 <= maxmenu) + break; + else + continue; + } + // If there are two pages - switch between them. + if (maxmenu > BOOTMENU_PAGE_SIZE) { + entry_id = 0; + page_num = 3 - page_num; // 3 - 1 = 2; 3 - 2 = 1. + printf("\n\nSelect boot device - page %d :" + " // press ENTER after your numpad input" + " - if any -\n " + " // - or to switch between the pages...\n", + page_num); + hlist_for_each_entry(pos, &BootList, node) { + if ((page_num == 1 && entry_id == BOOTMENU_PAGE_SIZE) || + (page_num == 2 && entry_id == 35)) + break; + if (page_num == 1 || entry_id >= BOOTMENU_PAGE_SIZE) + printf("%c. %s\n", keyboard_keys[entry_id], + strtcpy(desc, pos->description, ARRAY_SIZE(desc))); + entry_id++; + } + if (tpm_cshm) + printf("\nm-. TPM Configuration"); + printf("\n> "); + } + } else { + if (choice > maxmenu) { + if (tpm_cshm && choice == 36) + tpm_show_menu = 1; + } else { + // Choice is any of the detected boot devices ==> lets boot! + break; + } + } + } + + if (tpm_show_menu) { + tpm_show_menu = 0; + choice = 0; + if (digits == 0) + printf("TPM key pressed."); + else + digits = 0; printf("\n"); tpm_menu(); + printf("> "); } - if (scan_code >= 1 && scan_code <= maxmenu+1) - break; + } + + if (choice == 0) // 10(0) + choice = 10; + + if (digits == 0 && choice < 36) { + printf("%c", keyboard_keys[choice-1]); + if (choice > 9) // Decode into a number. + printf("(%d)", choice); } printf("\n"); - if (scan_code == 0x01) - // ESC - return; // Find entry and make top priority. - int choice = scan_code - 1; hlist_for_each_entry(pos, &BootList, node) { if (! --choice) break; diff --git a/src/config.h b/src/config.h index 93c8dbc..f85cc14 100644 --- a/src/config.h +++ b/src/config.h @@ -19,7 +19,7 @@ // Space to reserve in high-memory for tables #define BUILD_MAX_HIGHTABLE (256*1024) // Largest supported externaly facing drive id -#define BUILD_MAX_EXTDRIVE 16 +#define BUILD_MAX_EXTDRIVE 36 // Number of bytes the smbios may be and still live in the f-segment #define BUILD_MAX_SMBIOS_FSEG 600 // Maximum number of bytes the mptable may be and still be copied to f-segment

2 2

Custom-sized, large floppy images?
by Rafael Send 04 Apr '20

04 Apr '20

Hi, I'm working on stuffing a bootable Linux distro into coreboot. In QEMU I already succeded by using coreboot's built-in kernel loading mechanism, but that's without SeaBIOS. I'd love to have it as a SeaBIOS payload so I can also boot other things, but I guess I'd have to create a custom-sized floppy image for this or figure out how to create an ELF payload out of a Linux kernel (I'm open to either, but I wasn't able to find any documentation on the ELF method). The guy who put Win 3.1 in coreboot attempted the floppy method, but according to his article he did not find success with this method due to unknown and complex issues in the floppy-side logic of SeaBIOS. So, I'm making the question explicit: What would it take to support custom-sized floppy images? In particular, I'm thinking of a 16MB device... Alternatively, would it be possible to create an ELF file out of a Linux kernel+initrd / bootable image? Cheers, Rafael

4 28

[QEMU] [PATCH v5 0/8] Add Qemu to SeaBIOS LCHS interface
by Sam Eiderman 25 Aug '19

25 Aug '19

v1: Non-standard logical geometries break under QEMU. A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will guess - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead. In addition we can not enforce SeaBIOS to rely on phyiscal geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads can not report more than 16 physical heads when moved to an IDE controller, the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization. By supplying the logical geometies directly we are able to support such "exotic" disks. We will use fw_cfg to do just that. v2: Fix missing parenthesis check in "hd-geo-test: Add tests for lchs override" v3: * Rename fw_cfg key to "bios-geometry". * Remove "extendible" interface. * Add cpu_to_le32 fix as Laszlo suggested or big endian hosts * Fix last qtest commit - automatic docker tester for some reason does not have qemu-img set v4: * Change fw_cfg interface from mixed textual/binary to textual only v5: * Fix line > 80 chars in tests/hd-geo-test.c Sam Eiderman (8): block: Refactor macros - fix tabbing block: Support providing LCHS from user bootdevice: Add interface to gather LCHS scsi: Propagate unrealize() callback to scsi-hd bootdevice: Gather LCHS from all relevant devices bootdevice: Refactor get_boot_devices_list bootdevice: FW_CFG interface for LCHS values hd-geo-test: Add tests for lchs override bootdevice.c | 148 +++++++++--- hw/block/virtio-blk.c | 6 + hw/ide/qdev.c | 7 +- hw/nvram/fw_cfg.c | 14 +- hw/scsi/scsi-bus.c | 15 ++ hw/scsi/scsi-disk.c | 14 ++ include/hw/block/block.h | 22 +- include/hw/scsi/scsi.h | 1 + include/sysemu/sysemu.h | 4 + tests/Makefile.include | 2 +- tests/hd-geo-test.c | 582 +++++++++++++++++++++++++++++++++++++++++++++++ 11 files changed, 774 insertions(+), 41 deletions(-) -- 2.13.3

7 24

Keyboard is not working on MacBook Air 5,2 and MacBook Pro 10,1
by Evgeny Zinoviev 06 Jul '19

06 Jul '19

Hi folks. I've recently ported coreboot on MBA 5,2 (13'' mid 2012 model) and MBP 10,1 (15'' mid 2012 retina model). The integrated keyboard on these models is connected as a USB device, not PS/2. I have tested GRUB, SeaBIOS and Tianocore payloads, and the keyboard works in GRUB and Tianocore but not in SeaBIOS. I was advised to send a log to this mailing list. It was created with SEABIOS_DEBUG_LEVEL=9. I'm not yet familiar with SeaBIOS code, but with your help perhaps I can debug and fix this.

2 5

[PATCH v4 0/5] Add Qemu to SeaBIOS LCHS interface
by Sam Eiderman 01 Jul '19

01 Jul '19

v1: Non-standard logical geometries break under QEMU. A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will guess - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead. In addition we can not enforce SeaBIOS to rely on phyiscal geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads can not report more than 16 physical heads when moved to an IDE controller, the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization. By supplying the logical geometies directly we are able to support such "exotic" disks. We will use fw_cfg to do just that. v2: Rename bootdevices fw_cfg key to bios-geoemtry v3: Change fw_cfg interface from mixed binary/textual to textual only Squash commit "config: Add toggle for bootdevice information" v4: * Rename TRANSLATION_MACHINE to TRANSLATION_HOST * Rename "overriden" translation name to "host-supplied" * Rename overriden_lchs_supplied() to host_lchs_supplied() * Move sectors and heads check to host_lchs_supplied() * Reuse duplicate code in boot.c Sam Eiderman (5): geometry: Read LCHS from fw_cfg boot: Reorder functions in boot.c boot: Build ata and scsi paths in function geometry: Add boot_lchs_find_*() utility functions geometry: Apply LCHS values for boot devices src/Kconfig | 7 ++ src/block.c | 18 +++- src/block.h | 1 + src/boot.c | 273 +++++++++++++++++++++++++++++++++++++++++---------- src/hw/ahci.c | 1 + src/hw/ata.c | 8 ++ src/hw/esp-scsi.c | 2 + src/hw/lsi-scsi.c | 2 + src/hw/megasas.c | 1 + src/hw/mpt-scsi.c | 2 + src/hw/pvscsi.c | 1 + src/hw/virtio-blk.c | 2 + src/hw/virtio-scsi.c | 2 + src/util.h | 6 ++ 14 files changed, 272 insertions(+), 54 deletions(-) -- 2.13.3

2 6

[PATCH] Specify Python version
by Eloy Degen 28 Jun '19

28 Jun '19

Change Python version to 3 because /usr/bin/python is removed in Ubuntu 19.04 and python3 is already used in older Linux distros. I tested in coreboot and it still works. Signed-off-by: Eloy Degen <degeneloy(a)gmail.com> --- Makefile | 17 ++++++++--------- scripts/acpi_extract.py | 2 +- scripts/acpi_extract_preprocess.py | 2 +- scripts/buildrom.py | 2 +- scripts/buildversion.py | 2 +- scripts/checkrom.py | 2 +- scripts/checkstack.py | 2 +- scripts/checksum.py | 2 +- scripts/encodeint.py | 2 +- scripts/layoutrom.py | 2 +- scripts/readserial.py | 2 +- scripts/transdump.py | 2 +- scripts/vgafixup.py | 2 +- 13 files changed, 20 insertions(+), 21 deletions(-) diff --git a/Makefile b/Makefile index d2d11db..a0c2f2f 100644 --- a/Makefile +++ b/Makefile @@ -22,7 +22,6 @@ LD=$(CROSS_PREFIX)ld OBJCOPY=$(CROSS_PREFIX)objcopy OBJDUMP=$(CROSS_PREFIX)objdump STRIP=$(CROSS_PREFIX)strip -PYTHON=python CPP=cpp IASL:=iasl LD32BIT_FLAG:=-melf_i386 @@ -160,14 +159,14 @@ $(OUT)romlayout.o: src/romlayout.S $(OUT)autoconf.h $(OUT)asm-offsets.h $(OUT)romlayout16.lds: $(OUT)ccode32flat.o $(OUT)code32seg.o $(OUT)ccode16.o $(OUT)romlayout.o src/version.c scripts/layoutrom.py scripts/buildversion.py @echo " Building ld scripts" - $(Q)$(PYTHON) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(OBJDUMP);$(STRIP)" $(OUT)autoversion.h + $(Q) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(OBJDUMP);$(STRIP)" $(OUT)autoversion.h $(Q)$(CC) $(CFLAGS32FLAT) -c src/version.c -o $(OUT)version.o $(Q)$(LD) $(LD32BIT_FLAG) -r $(OUT)ccode32flat.o $(OUT)version.o -o $(OUT)code32flat.o $(Q)$(LD) $(LD32BIT_FLAG) -r $(OUT)ccode16.o $(OUT)romlayout.o -o $(OUT)code16.o $(Q)$(OBJDUMP) -thr $(OUT)code32flat.o > $(OUT)code32flat.o.objdump $(Q)$(OBJDUMP) -thr $(OUT)code32seg.o > $(OUT)code32seg.o.objdump $(Q)$(OBJDUMP) -thr $(OUT)code16.o > $(OUT)code16.o.objdump - $(Q)$(PYTHON) ./scripts/layoutrom.py $(OUT)code16.o.objdump $(OUT)code32seg.o.objdump $(OUT)code32flat.o.objdump $(OUT)$(KCONFIG_AUTOHEADER) $(OUT)romlayout16.lds $(OUT)romlayout32seg.lds $(OUT)romlayout32flat.lds + $(Q) ./scripts/layoutrom.py $(OUT)code16.o.objdump $(OUT)code32seg.o.objdump $(OUT)code32flat.o.objdump $(OUT)$(KCONFIG_AUTOHEADER) $(OUT)romlayout16.lds $(OUT)romlayout32seg.lds $(OUT)romlayout32flat.lds # These are actually built by scripts/layoutrom.py above, but by pulling them # into an extra rule we prevent make -j from spawning layoutrom.py 4 times. @@ -190,7 +189,7 @@ $(OUT)bios.bin.prep: $(OUT)rom.o scripts/checkrom.py $(Q)rm -f $(OUT)bios.bin $(OUT)Csm16.bin $(OUT)bios.bin.elf $(Q)$(OBJDUMP) -thr $< > $<.objdump $(Q)$(OBJCOPY) -O binary $< $(OUT)bios.bin.raw - $(Q)$(PYTHON) ./scripts/checkrom.py $<.objdump $(CONFIG_ROM_SIZE) $(OUT)bios.bin.raw $(OUT)bios.bin.prep + $(Q) ./scripts/checkrom.py $<.objdump $(CONFIG_ROM_SIZE) $(OUT)bios.bin.raw $(OUT)bios.bin.prep $(OUT)bios.bin: $(OUT)bios.bin.prep @echo " Creating $@" @@ -220,7 +219,7 @@ $(OUT)vgaccode16.raw.s: $(OUT)autoconf.h $(patsubst %.c, $(OUT)%.o,$(SRCVGA)) ; $(OUT)vgaccode16.o: $(OUT)vgaccode16.raw.s scripts/vgafixup.py @echo " Fixup VGA rom assembler" - $(Q)$(PYTHON) ./scripts/vgafixup.py $< $(OUT)vgaccode16.s + $(Q) ./scripts/vgafixup.py $< $(OUT)vgaccode16.s $(Q)$(AS) --32 src/code16gcc.s $(OUT)vgaccode16.s -o $@ else $(OUT)vgaccode16.o: $(OUT)autoconf.h $(patsubst %.c, $(OUT)%.o,$(SRCVGA)) ; $(call whole-compile, $(CFLAGS16) -Isrc, $(SRCVGA),$@) @@ -232,7 +231,7 @@ $(OUT)vgaentry.o: vgasrc/vgaentry.S $(OUT)autoconf.h $(OUT)asm-offsets.h $(OUT)vgarom.o: $(OUT)vgaccode16.o $(OUT)vgaentry.o $(OUT)vgasrc/vgalayout.lds vgasrc/vgaversion.c scripts/buildversion.py @echo " Linking $@" - $(Q)$(PYTHON) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(OBJDUMP);$(STRIP)" $(OUT)autovgaversion.h + $(Q) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(OBJDUMP);$(STRIP)" $(OUT)autovgaversion.h $(Q)$(CC) $(CFLAGS16) -c vgasrc/vgaversion.c -o $(OUT)vgaversion.o $(Q)$(LD) --gc-sections -T $(OUT)vgasrc/vgalayout.lds $(OUT)vgaccode16.o $(OUT)vgaentry.o $(OUT)vgaversion.o -o $@ @@ -242,7 +241,7 @@ $(OUT)vgabios.bin.raw: $(OUT)vgarom.o $(OUT)vgabios.bin: $(OUT)vgabios.bin.raw scripts/buildrom.py @echo " Finalizing rom $@" - $(Q)$(PYTHON) ./scripts/buildrom.py $< $@ + $(Q) ./scripts/buildrom.py $< $@ ################ DSDT build rules @@ -253,9 +252,9 @@ iasl-option=$(shell if test -z "`$(1) $(2) 2>&1 > /dev/null`" \ %.hex: %.dsl ./scripts/acpi_extract_preprocess.py ./scripts/acpi_extract.py @echo " Compiling IASL $@" $(Q)$(CPP) $(CPPFLAGS) $< -o $(OUT)$*.dsl.i.orig - $(Q)$(PYTHON) ./scripts/acpi_extract_preprocess.py $(OUT)$*.dsl.i.orig > $(OUT)$*.dsl.i + $(Q) ./scripts/acpi_extract_preprocess.py $(OUT)$*.dsl.i.orig > $(OUT)$*.dsl.i $(Q)$(IASL) $(call iasl-option,$(IASL),-Pn,) -vs -l -tc -p $(OUT)$* $(OUT)$*.dsl.i - $(Q)$(PYTHON) ./scripts/acpi_extract.py $(OUT)$*.lst > $(OUT)$*.off + $(Q) ./scripts/acpi_extract.py $(OUT)$*.lst > $(OUT)$*.off $(Q)cat $(OUT)$*.off > $@ iasl: src/fw/acpi-dsdt.hex src/fw/ssdt-proc.hex src/fw/ssdt-pcihp.hex src/fw/ssdt-misc.hex diff --git a/scripts/acpi_extract.py b/scripts/acpi_extract.py index 3ed863b..f368a0d 100755 --- a/scripts/acpi_extract.py +++ b/scripts/acpi_extract.py @@ -1,4 +1,4 @@ -#!/usr/bin/python +#!/usr/bin/env python3 # Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <mst(a)redhat.com> # # This file may be distributed under the terms of the GNU GPLv3 license. diff --git a/scripts/acpi_extract_preprocess.py b/scripts/acpi_extract_preprocess.py index 2698118..370512b 100755 --- a/scripts/acpi_extract_preprocess.py +++ b/scripts/acpi_extract_preprocess.py @@ -1,4 +1,4 @@ -#!/usr/bin/python +#!/usr/bin/env python3 # Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <mst(a)redhat.com> # # This file may be distributed under the terms of the GNU GPLv3 license. diff --git a/scripts/buildrom.py b/scripts/buildrom.py index 0499049..821f421 100755 --- a/scripts/buildrom.py +++ b/scripts/buildrom.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # Fill in checksum/size of an option rom, and pad it to proper length. # # Copyright (C) 2009 Kevin O'Connor <kevin(a)koconnor.net> diff --git a/scripts/buildversion.py b/scripts/buildversion.py index 8875497..13624ce 100755 --- a/scripts/buildversion.py +++ b/scripts/buildversion.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # Generate version information for a program # # Copyright (C) 2015 Kevin O'Connor <kevin(a)koconnor.net> diff --git a/scripts/checkrom.py b/scripts/checkrom.py index aced5e2..3f1065c 100755 --- a/scripts/checkrom.py +++ b/scripts/checkrom.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # Script to check a bios image and report info on it. # # Copyright (C) 2008 Kevin O'Connor <kevin(a)koconnor.net> diff --git a/scripts/checkstack.py b/scripts/checkstack.py index 255768a..3bb58bc 100755 --- a/scripts/checkstack.py +++ b/scripts/checkstack.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # Script that tries to find how much stack space each function in an # object is using. # diff --git a/scripts/checksum.py b/scripts/checksum.py index 773fa7a..bef875a 100755 --- a/scripts/checksum.py +++ b/scripts/checksum.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#/usr/bin/env python3 # Script to report the checksum of a file. # # Copyright (C) 2009 Kevin O'Connor <kevin(a)koconnor.net> diff --git a/scripts/encodeint.py b/scripts/encodeint.py index 0d34aee..e861d81 100755 --- a/scripts/encodeint.py +++ b/scripts/encodeint.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # Encode an integer in little endian format in a file. # # Copyright (C) 2011 Kevin O'Connor <kevin(a)koconnor.net> diff --git a/scripts/layoutrom.py b/scripts/layoutrom.py index 6616721..f30326a 100755 --- a/scripts/layoutrom.py +++ b/scripts/layoutrom.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # Script to analyze code and arrange ld sections. # # Copyright (C) 2008-2014 Kevin O'Connor <kevin(a)koconnor.net> diff --git a/scripts/readserial.py b/scripts/readserial.py index a7383e8..fdee3af 100755 --- a/scripts/readserial.py +++ b/scripts/readserial.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # Script that can read from a serial device and show timestamps. # # Copyright (C) 2009 Kevin O'Connor <kevin(a)koconnor.net> diff --git a/scripts/transdump.py b/scripts/transdump.py index 665f04a..9877b33 100755 --- a/scripts/transdump.py +++ b/scripts/transdump.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # This script is useful for taking the output of memdump() and # converting it back into binary output. This can be useful, for diff --git a/scripts/vgafixup.py b/scripts/vgafixup.py index 2053cd5..01ec814 100644 --- a/scripts/vgafixup.py +++ b/scripts/vgafixup.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # Work around x86emu bugs by replacing problematic instructions. # # Copyright (C) 2012 Kevin O'Connor <kevin(a)koconnor.net> -- 2.20.1

1 0

[PATCH 1/5] ati-vga: make less verbose
by Gerd Hoffmann 28 Jun '19

28 Jun '19

Reduce loglevel for mode line removals from 1 to 3. Signed-off-by: Gerd Hoffmann <kraxel(a)redhat.com> --- vgasrc/atiext.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/vgasrc/atiext.c b/vgasrc/atiext.c index 8c9e6966db47..b3975226c478 100644 --- a/vgasrc/atiext.c +++ b/vgasrc/atiext.c @@ -343,7 +343,7 @@ ati_setup(void) height > 0xfff || mem > totalmem || memmodel != MM_DIRECT) { - dprintf(1, "ati: removing mode 0x%x\n", GET_GLOBAL(m->mode)); + dprintf(3, "ati: removing mode 0x%x\n", GET_GLOBAL(m->mode)); SET_VGA(m->mode, 0xffff); } } -- 2.18.1

2 6

[PATCH] csm: Fix boot priority translation
by David Woodhouse 27 Jun '19

27 Jun '19

For CSM, the highest priority is zero. In SeaBIOS that means "don't", and the highest priority is 1. So we end up with the fun outcome that booting from NVMe worked only when it *wasn't* selected as the primary boot target, because we don't actually run the nvme_controller_setup() thread for an NVMe controller if its boot prio is zero. Signed-off-by: David Woodhouse <dwmw2(a)infradead.org> --- src/fw/csm.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/src/fw/csm.c b/src/fw/csm.c index 3fcc252..7663d31 100644 --- a/src/fw/csm.c +++ b/src/fw/csm.c @@ -319,6 +319,20 @@ handle_csm(struct bregs *regs) csm_return(regs); } +static int csm_prio_to_seabios(u16 csm_prio) +{ + switch (csm_prio) { + case BBS_DO_NOT_BOOT_FROM: + case BBS_IGNORE_ENTRY: + return -1; + + case BBS_LOWEST_PRIORITY: + case BBS_UNPRIORITIZED_ENTRY: + default: + return csm_prio + 1; + } +} + int csm_bootprio_ata(struct pci_device *pci, int chanid, int slave) { if (!csm_boot_table) @@ -327,7 +341,7 @@ int csm_bootprio_ata(struct pci_device *pci, int chanid, int slave) int index = 1 + (chanid * 2) + slave; dprintf(3, "CSM bootprio for ATA%d,%d (index %d) is %d\n", chanid, slave, index, bbs[index].BootPriority); - return bbs[index].BootPriority; + return csm_prio_to_seabios(bbs[index].BootPriority); } int csm_bootprio_fdc(struct pci_device *pci, int port, int fdid) @@ -336,7 +350,7 @@ int csm_bootprio_fdc(struct pci_device *pci, int port, int fdid) return -1; BBS_TABLE *bbs = (void *)csm_boot_table->BbsTable; dprintf(3, "CSM bootprio for FDC is %d\n", bbs[0].BootPriority); - return bbs[0].BootPriority; + return csm_prio_to_seabios(bbs[0].BootPriority); } int csm_bootprio_pci(struct pci_device *pci) @@ -350,7 +364,7 @@ int csm_bootprio_pci(struct pci_device *pci) if (pci->bdf == pci_to_bdf(bbs[i].Bus, bbs[i].Device, bbs[i].Function)) { dprintf(3, "CSM bootprio for PCI(%d,%d,%d) is %d\n", bbs[i].Bus, bbs[i].Device, bbs[i].Function, bbs[i].BootPriority); - return bbs[i].BootPriority; + return csm_prio_to_seabios(bbs[i].BootPriority); } } return -1;

4 11

[PATCH v3 0/4] Add Qemu to SeaBIOS LCHS interface
by Sam Eiderman 26 Jun '19

26 Jun '19

v1: Non-standard logical geometries break under QEMU. A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will guess - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead. In addition we can not enforce SeaBIOS to rely on phyiscal geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads can not report more than 16 physical heads when moved to an IDE controller, the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization. By supplying the logical geometies directly we are able to support such "exotic" disks. We will use fw_cfg to do just that. v2: Rename bootdevices fw_cfg key to bios-geoemtry v3: Change fw_cfg interface from mixed binary/textual to textual only Squash commit "config: Add toggle for bootdevice information" Sam Eiderman (4): geometry: Read LCHS from fw_cfg boot: Reorder functions in boot.c geometry: Add boot_lchs_find_*() utility functions geometry: Apply LCHS values for boot devices src/Kconfig | 7 ++ src/block.c | 21 ++++- src/block.h | 1 + src/boot.c | 239 +++++++++++++++++++++++++++++++++++++++++---------- src/hw/ahci.c | 1 + src/hw/ata.c | 8 ++ src/hw/esp-scsi.c | 2 + src/hw/lsi-scsi.c | 2 + src/hw/megasas.c | 1 + src/hw/mpt-scsi.c | 2 + src/hw/pvscsi.c | 1 + src/hw/virtio-blk.c | 2 + src/hw/virtio-scsi.c | 2 + src/util.h | 6 ++ 14 files changed, 249 insertions(+), 46 deletions(-) -- 2.13.3

3 14

Re: [QEMU] [PATCH v4 0/8] Add Qemu to SeaBIOS LCHS interface
by Gerd Hoffmann 20 Jun '19

20 Jun '19

> === OUTPUT BEGIN === > 1/8 Checking commit cf2168a66dbd (block: Refactor macros - fix tabbing) > ERROR: Macros with complex values should be enclosed in parenthesis > #55: FILE: include/hw/block/block.h:65: > +#define DEFINE_BLOCK_CHS_PROPERTIES(_state, _conf) \ > + DEFINE_PROP_UINT32("cyls", _state, _conf.cyls, 0), \ > + DEFINE_PROP_UINT32("heads", _state, _conf.heads, 0), \ > DEFINE_PROP_UINT32("secs", _state, _conf.secs, 0) False positive. > 8/8 Checking commit 6664d7d898d5 (hd-geo-test: Add tests for lchs override) > WARNING: line over 80 characters > #242: FILE: tests/hd-geo-test.c:579: > + (char *)r->dev_path, &(r->chs.c), &(r->chs.h), &(r->chs.s)); Should be fixed. > WARNING: Block comments use a leading /* on a separate line > #640: FILE: tests/hd-geo-test.c:995: > + "skipping hd-geo/override/* tests"); False positive too. cheers, Gerd

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

SeaBIOS June 2019