SeaBIOS December 2010

seabios@seabios.org

14 participants
34 discussions

[PATCH] Check if capability enabled in XXX_cmd_data functions.

by Kevin O'Connor

Make sure to check if CONFIG_AHCI, CONFIG_ATA, CONFIG_USB_MSC is enabled in their respective cmd_data functions. This reduces the compile size when they are not enabled. --- src/ahci.c | 3 +++ src/ata.c | 3 +++ src/usb-msc.c | 3 +++ 3 files changed, 9 insertions(+), 0 deletions(-) diff --git a/src/ahci.c b/src/ahci.c index ee404d4..6c3127a 100644 --- a/src/ahci.c +++ b/src/ahci.c @@ -155,6 +155,9 @@ static int ahci_command(struct ahci_port_s *port, int iswrite, int isatapi, int ahci_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) { + if (! CONFIG_AHCI) + return 0; + struct ahci_port_s *port = container_of( op->drive_g, struct ahci_port_s, drive); struct ahci_cmd_s *cmd = GET_GLOBAL(port->cmd); diff --git a/src/ata.c b/src/ata.c index 7079bf2..e533108 100644 --- a/src/ata.c +++ b/src/ata.c @@ -602,6 +602,9 @@ process_ata_op(struct disk_op_s *op) int atapi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) { + if (! CONFIG_ATA) + return 0; + struct atadrive_s *adrive_g = container_of( op->drive_g, struct atadrive_s, drive); struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf); diff --git a/src/usb-msc.c b/src/usb-msc.c index 968cae3..080efdc 100644 --- a/src/usb-msc.c +++ b/src/usb-msc.c @@ -50,6 +50,9 @@ struct csw_s { int usb_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) { + if (!CONFIG_USB_MSC) + return 0; + dprintf(16, "usb_cmd_data id=%p write=%d count=%d bs=%d buf=%p\n" , op->drive_g, 0, op->count, blocksize, op->buf_fl); struct usbdrive_s *udrive_g = container_of( -- 1.7.3.2

10 years, 9 months

[PATCH] Require a "_cfuncXX_" symbol prefix for inter-mode c function references.

by Kevin O'Connor

The compiler can get confused when referencing a C function in a different mode. (It reasonably assumes that the C function in the current mode is desired.) To avoid this compiler confusion, introduce symbol prefixes (_cfunc16_, _cfunc32flat_, _cfunc32seg_) that must be used on C function symbols that are referenced from other compilation modes. This makes it less likely compiler confusion will occur. It will also makes it easier to implement and use vtable like operation structures. --- src/pci.c | 12 ++++-------- src/resume.c | 2 +- src/romlayout.S | 12 ++++++------ src/stacks.c | 6 ++---- src/types.h | 12 ++++++------ tools/layoutrom.py | 39 ++++++++++++++++++++++++++++----------- 6 files changed, 47 insertions(+), 36 deletions(-) diff --git a/src/pci.c b/src/pci.c index e43c83a..5237f19 100644 --- a/src/pci.c +++ b/src/pci.c @@ -229,21 +229,19 @@ pci_reboot(void) // helper functions to access pci mmio bars from real mode -extern u32 pci_readl_32(u32 addr); -#if MODESEGMENT == 0 u32 VISIBLE32FLAT pci_readl_32(u32 addr) { dprintf(3, "32: pci read : %x\n", addr); return readl((void*)addr); } -#endif u32 pci_readl(u32 addr) { if (MODESEGMENT) { dprintf(3, "16: pci read : %x\n", addr); - return call32(pci_readl_32, addr, -1); + extern void _cfunc32flat_pci_readl_32(u32 addr); + return call32(_cfunc32flat_pci_readl_32, addr, -1); } else { return pci_readl_32(addr); } @@ -254,15 +252,12 @@ struct reg32 { u32 data; }; -extern void pci_writel_32(struct reg32 *reg32); -#if MODESEGMENT == 0 void VISIBLE32FLAT pci_writel_32(struct reg32 *reg32) { dprintf(3, "32: pci write: %x, %x (%p)\n", reg32->addr, reg32->data, reg32); writel((void*)(reg32->addr), reg32->data); } -#endif void pci_writel(u32 addr, u32 val) { @@ -271,7 +266,8 @@ void pci_writel(u32 addr, u32 val) dprintf(3, "16: pci write: %x, %x (%x:%p)\n", reg32.addr, reg32.data, GET_SEG(SS), &reg32); void *flatptr = MAKE_FLATPTR(GET_SEG(SS), &reg32); - call32(pci_writel_32, (u32)flatptr, -1); + extern void _cfunc32flat_pci_writel_32(struct reg32 *reg32); + call32(_cfunc32flat_pci_writel_32, (u32)flatptr, -1); } else { pci_writel_32(&reg32); } diff --git a/src/resume.c b/src/resume.c index 2a743c9..20e2e3d 100644 --- a/src/resume.c +++ b/src/resume.c @@ -40,7 +40,7 @@ handle_resume(u8 status) asm volatile( "movw %w1, %%ss\n" "movl %0, %%esp\n" - "movl $s3_resume, %%edx\n" + "movl $_cfunc32flat_s3_resume, %%edx\n" "jmp transition32\n" : : "i"(BUILD_S3RESUME_STACK_ADDR), "r"(0) ); diff --git a/src/romlayout.S b/src/romlayout.S index d83f337..7a14a7f 100644 --- a/src/romlayout.S +++ b/src/romlayout.S @@ -252,7 +252,7 @@ entry_post: jnz 1f // Normal entry point - ENTRY_INTO32 _start + ENTRY_INTO32 _cfunc32flat__start // Entry point when a post call looks like a resume. 1: @@ -367,7 +367,7 @@ apm32protected_entry: pushl %cs // Move second descriptor after %cs to %gs addl $16, (%esp) popl %gs - ENTRY_ARG_ESP handle_apm32 + ENTRY_ARG_ESP _cfunc32seg_handle_apm32 popl %gs popfl lretl @@ -379,7 +379,7 @@ pcibios32_entry: pushl %gs // Backup %gs and set %gs=%ds pushl %ds popl %gs - ENTRY_ARG_ESP handle_pcibios32 + ENTRY_ARG_ESP _cfunc32seg_handle_pcibios32 popl %gs popfl lretl @@ -418,7 +418,7 @@ post32: movw %ax, %gs movw %ax, %ss movl $BUILD_STACK_ADDR, %esp - ljmpl $SEG32_MODE32_CS, $_start + ljmpl $SEG32_MODE32_CS, $_cfunc32flat__start .code16gcc @@ -476,11 +476,11 @@ irqentryarg: // int 18/19 are special - they reset stack and call into 32bit mode. DECLFUNC entry_19 entry_19: - ENTRY_INTO32 handle_19 + ENTRY_INTO32 _cfunc32flat_handle_19 DECLFUNC entry_18 entry_18: - ENTRY_INTO32 handle_18 + ENTRY_INTO32 _cfunc32flat_handle_18 /**************************************************************** diff --git a/src/stacks.c b/src/stacks.c index c77ba1f..53bf669 100644 --- a/src/stacks.c +++ b/src/stacks.c @@ -373,8 +373,6 @@ wait_preempt(void) return 1; } -extern void yield_preempt(void); -#if MODESEGMENT == 0 // Try to execute 32bit threads. void VISIBLE32INIT yield_preempt(void) @@ -382,7 +380,6 @@ yield_preempt(void) PreemptCount++; switch_next(&MainThread); } -#endif // 16bit code that checks if threads are pending and executes them if so. void @@ -393,5 +390,6 @@ check_preempt(void) || GET_FLATPTR(MainThread.next) == &MainThread) return; - call32(yield_preempt, 0, 0); + extern void _cfunc32flat_yield_preempt(void); + call32(_cfunc32flat_yield_preempt, 0, 0); } diff --git a/src/types.h b/src/types.h index 7d610ec..c0c6d26 100644 --- a/src/types.h +++ b/src/types.h @@ -44,11 +44,11 @@ extern void __force_link_error__only_in_16bit(void) __noreturn; // Notes a function as externally visible in the 16bit code chunk. # define VISIBLE16 __VISIBLE // Notes a function as externally visible in the 32bit flat code chunk. -# define VISIBLE32FLAT __section(".discard.func32flat." UNIQSEC) noinline __weak +# define VISIBLE32FLAT __section(".discard.func32flat." UNIQSEC) noinline // Notes a 32bit flat function that will only be called during init. # define VISIBLE32INIT VISIBLE32FLAT // Notes a function as externally visible in the 32bit segmented code chunk. -# define VISIBLE32SEG __section(".discard.func32seg." UNIQSEC) noinline __weak +# define VISIBLE32SEG __section(".discard.func32seg." UNIQSEC) noinline // Designate a variable as (only) visible to 16bit code. # define VAR16 __section(".data16." UNIQSEC) // Designate a variable as visible to 16bit, 32bit, and assembler code. @@ -70,8 +70,8 @@ extern void __force_link_error__only_in_16bit(void) __noreturn; # define ASSERT32SEG() __force_link_error__only_in_32bit_segmented() # define ASSERT32FLAT() __force_link_error__only_in_32bit_flat() #elif MODESEGMENT == 1 -# define VISIBLE16 __section(".discard.func16." UNIQSEC) noinline __weak -# define VISIBLE32FLAT __section(".discard.func32flat." UNIQSEC) noinline __weak +# define VISIBLE16 __section(".discard.func16." UNIQSEC) noinline +# define VISIBLE32FLAT __section(".discard.func32flat." UNIQSEC) noinline # define VISIBLE32INIT VISIBLE32FLAT # define VISIBLE32SEG __VISIBLE # define VAR16 __section(".discard.var16." UNIQSEC) @@ -86,10 +86,10 @@ extern void __force_link_error__only_in_16bit(void) __noreturn; # define ASSERT32SEG() do { } while (0) # define ASSERT32FLAT() __force_link_error__only_in_32bit_flat() #else -# define VISIBLE16 __section(".discard.func16." UNIQSEC) noinline __weak +# define VISIBLE16 __section(".discard.func16." UNIQSEC) noinline # define VISIBLE32FLAT __section(".text.runtime." UNIQSEC) __VISIBLE # define VISIBLE32INIT __section(".text.init." UNIQSEC) __VISIBLE -# define VISIBLE32SEG __section(".discard.func32seg." UNIQSEC) noinline __weak +# define VISIBLE32SEG __section(".discard.func32seg." UNIQSEC) noinline # define VAR16 __section(".discard.var16." UNIQSEC) # define VAR16VISIBLE VAR16 __VISIBLE __weak # define VAR16EXPORT VAR16VISIBLE diff --git a/tools/layoutrom.py b/tools/layoutrom.py index 7eca502..4109b16 100755 --- a/tools/layoutrom.py +++ b/tools/layoutrom.py @@ -209,15 +209,16 @@ def outXRefs(sections): for reloc in section.relocs: symbol = reloc.symbol if (symbol.section is None - or symbol.section.fileid == section.fileid - or symbol.name in xrefs): + or (symbol.section.fileid == section.fileid + and symbol.name == reloc.symbolname) + or reloc.symbolname in xrefs): continue - xrefs[symbol.name] = 1 + xrefs[reloc.symbolname] = 1 addr = symbol.section.finalloc + symbol.offset if (section.fileid == '32flat' and symbol.section.fileid in ('16', '32seg')): addr += BUILD_BIOS_ADDR - out += "%s = 0x%x ;\n" % (symbol.name, addr) + out += "%s = 0x%x ;\n" % (reloc.symbolname, addr) return out # Write LD script includes for the given sections using relative offsets @@ -396,13 +397,29 @@ def findInit(sections): # Section garbage collection ###################################################################### +CFUNCPREFIX = [('_cfunc16_', 0), ('_cfunc32seg_', 1), ('_cfunc32flat_', 2)] + # Find and keep the section associated with a symbol (if available). -def keepsymbol(reloc, infos, pos): - symbolname = reloc.symbol.name +def keepsymbol(reloc, infos, pos, isxref): + symbolname = reloc.symbolname + mustbecfunc = 0 + for symprefix, needpos in CFUNCPREFIX: + if symbolname.startswith(symprefix): + if needpos != pos: + return -1 + symbolname = symbolname[len(symprefix):] + mustbecfunc = 1 + break symbol = infos[pos][1].get(symbolname) if (symbol is None or symbol.section is None or symbol.section.name.startswith('.discard.')): return -1 + isdestcfunc = (symbol.section.name.startswith('.text.') + and not symbol.section.name.startswith('.text.asm.')) + if ((mustbecfunc and not isdestcfunc) + or (not mustbecfunc and isdestcfunc and isxref)): + return -1 + reloc.symbol = symbol keepsection(symbol.section, infos, pos) return 0 @@ -416,14 +433,14 @@ def keepsection(section, infos, pos=0): section.keep = 1 # Keep all sections that this section points to for reloc in section.relocs: - ret = keepsymbol(reloc, infos, pos) + ret = keepsymbol(reloc, infos, pos, 0) if not ret: continue # Not in primary sections - it may be a cross 16/32 reference - ret = keepsymbol(reloc, infos, (pos+1)%3) + ret = keepsymbol(reloc, infos, (pos+1)%3, 1) if not ret: continue - ret = keepsymbol(reloc, infos, (pos+2)%3) + ret = keepsymbol(reloc, infos, (pos+2)%3, 1) if not ret: continue @@ -449,7 +466,7 @@ class Section: name = size = alignment = fileid = relocs = None finalloc = category = keep = None class Reloc: - offset = type = symbol = None + offset = type = symbolname = symbol = None class Symbol: name = offset = section = None @@ -514,6 +531,7 @@ def parseObjDump(file, fileid): reloc = Reloc() reloc.offset = int(off, 16) reloc.type = type + reloc.symbolname = symbolname reloc.symbol = symbols[symbolname] relocsection.relocs.append(reloc) except ValueError: @@ -541,7 +559,6 @@ def main(): findInit(sections) # Determine the final memory locations of each kept section. - # locsX = [(addr, sectioninfo), ...] doLayout(sections) # Write out linker script files. -- 1.7.3.2

10 years, 9 months

[PATCH v2 0/4] ahci support

by Gerd Hoffmann

Hi, Second version of the ahci patches. Rebased to latest master, updated according to Kevins review comments. The patches are also available in the git repository at: git://anongit.freedesktop.org/~kraxel/seabios ahci.3 Gerd Hoffmann (4): pci: add helper functions for mmio bar access from real mode. util: add memset_fl() ata: make helpers available add ahci support Makefile | 2 +- src/ahci.c | 480 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ src/ahci.h | 196 +++++++++++++++++++++++ src/ata.c | 20 ++- src/ata.h | 2 + src/block.c | 3 + src/blockcmd.c | 3 + src/config.h | 2 + src/disk.h | 1 + src/pci.c | 51 ++++++ src/pci.h | 4 + src/post.c | 2 + src/util.c | 9 + src/util.h | 1 + 14 files changed, 766 insertions(+), 10 deletions(-) create mode 100644 src/ahci.c create mode 100644 src/ahci.h

10 years, 9 months

Re: [SeaBIOS] [PATCHv6 00/16] boot order specification

by Kevin O'Connor

Trimming CC list, adding seabios list. On Sat, Nov 27, 2010 at 09:04:24PM +0200, Gleb Natapov wrote: > On Sat, Nov 27, 2010 at 01:40:12PM -0500, Kevin O'Connor wrote: > > On Sat, Nov 27, 2010 at 08:15:42PM +0200, Gleb Natapov wrote: > > > Qemu does not know that Seabios needs optionrom to boot from a device. > > > It knows even less about bcvs in option rom. Qemu knows about device > > > itself, not how firmware boots from it. > > > > If the user wants to boot from a device and that device has an > > optionrom, then it's a safe bet that the optionrom is needed to boot > > from it. > > > Suppose we add SCSI support to Seabios and suppose SCSI card Seabios can > natively boot from has optionrom. What Seabios will do in such situation > and how qemu can know it? Besides qemu support tries to be firmware > agnostic. In such a situation, under my proposal, users wouldn't be able to specify a default boot from their scsi drive until after qemu was also upgraded to know seabios could boot native scsi. (Or, they'd only be able to do it by adding in a command-line option.) > > In any case, I'd rather have qemu know which devices seabios can boot > > then have seabios try to figure out what rom to run from a device > > path. > You run all of them just like you do now. Information you get from qemu is > only used for sorting BCV/BEV entries. BCV/BEV that does not have > corespondent boot path in boot order list is put at the end. If qemu sends in "/pci@i0cf8/scsi@3/disk@0,0" or "/pci@i0cf8/ethernet@4/ethernet-phy@0" it will expect seabios to boot from the appropriate device. In both cases, seabios would need to run a rom in order to fulfill that request. Trying to figure out which rom is quite painful. That's why I'd prefer to see qemu instead pass in something like "/pci@i0cf8/rom@3/bcv@0" or "/pci@i0cf8/rom@4/bev". That is, if the machine needs to boot via a rom I'd prefer qemu state that explicitly. BTW, in the situation where seabios has native device support (eg, ATA), I don't have any concerns. (The names are a bit verbose, but that's not really an issue.) > > > BTW are you actually aware of any option rom with multiple BCVs and, if > > > yes, how those BCVs differ? > > > > Multiple BCVs - yes. A SCSI card will define a BCV for each attached > > drive. I don't have a scsi card myself, but the support was added by > > a user who ran into the problem first hand. > Optionrom is static. How number of BCVs can depend on number of attached > drives? Not sure what you mean by "Optionrom is static". SeaBIOS unlocks the memory, and the optionrom can and will modify itself with additional PNP headers so that it can list multiple BCVs - one for each drive. In particular, gPXE uses self modification to relocate parts of itself into high ram. -Kevin

10 years, 9 months

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

SeaBIOS December 2010