coreboot-gerrit December 2019

coreboot-gerrit@coreboot.org

1 participants
1761 discussions

Change in coreboot[master]: sc7180: Add USB support
by mturney mturney (Code Review) 05 Dec '19

05 Dec '19

mturney mturney has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35503 ) Change subject: sc7180: Add USB support ...................................................................... sc7180: Add USB support This includes USB QUSB2,QMP Phy and Controller support And libpayload support for USB Change-Id: I0651fc28dc227efbeb23eeefe9b96a3b940ae995 Signed-off-by: Sandeep Maheswaram <sanm(a)codeaurora.org> --- M payloads/libpayload/configs/config.trogdor M src/mainboard/google/trogdor/mainboard.c M src/mainboard/google/trogdor/romstage.c M src/soc/qualcomm/sc7180/Makefile.inc M src/soc/qualcomm/sc7180/include/soc/addressmap.h M src/soc/qualcomm/sc7180/include/soc/clock.h A src/soc/qualcomm/sc7180/include/soc/efuse.h A src/soc/qualcomm/sc7180/include/soc/usb.h A src/soc/qualcomm/sc7180/usb.c 9 files changed, 931 insertions(+), 8 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/03/35503/1 diff --git a/payloads/libpayload/configs/config.trogdor b/payloads/libpayload/configs/config.trogdor index 0625ff5..7ca654b 100644 --- a/payloads/libpayload/configs/config.trogdor +++ b/payloads/libpayload/configs/config.trogdor @@ -3,3 +3,6 @@ CONFIG_LP_TIMER_ARM64_ARCH=y CONFIG_LP_SERIAL_CONSOLE=y CONFIG_LP_SC7180_SERIAL_CONSOLE=y +CONFIG_LP_USB=y +CONFIG_LP_USB_EHCI=y +CONFIG_LP_USB_XHCI=y diff --git a/src/mainboard/google/trogdor/mainboard.c b/src/mainboard/google/trogdor/mainboard.c index dbdb4ed..170955a 100644 --- a/src/mainboard/google/trogdor/mainboard.c +++ b/src/mainboard/google/trogdor/mainboard.c @@ -19,10 +19,23 @@ #include <gpio.h> #include <timestamp.h> #include <soc/qupv3_fw_config.h> +#include <soc/usb.h> + +static struct usb_board_data usb0_board_data = { + .pll_bias_control_2 = 0x22, + .imp_ctrl1 = 0x08, + .port_tune1 = 0xc5, +}; + +static void setup_usb(void) +{ + setup_usb_host0(&usb0_board_data); +} static void mainboard_init(struct device *dev) { qupv3_fw_init(); + setup_usb(); } static void mainboard_enable(struct device *dev) diff --git a/src/mainboard/google/trogdor/romstage.c b/src/mainboard/google/trogdor/romstage.c index 7185387..872798a 100644 --- a/src/mainboard/google/trogdor/romstage.c +++ b/src/mainboard/google/trogdor/romstage.c @@ -14,10 +14,22 @@ */ #include <arch/stages.h> +#include <soc/usb.h> #include <soc/qclib_common.h> +static void prepare_usb(void) +{ + /* + * Do DWC3 core and phy reset. Kick these resets + * off early so they get at least 1ms to settle. + */ + reset_usb0(); +} + void platform_romstage_main(void) { + prepare_usb(); + /* QCLib: DDR init & train */ qclib_load_and_run(); } diff --git a/src/soc/qualcomm/sc7180/Makefile.inc b/src/soc/qualcomm/sc7180/Makefile.inc index d8fc33a..8db260d 100644 --- a/src/soc/qualcomm/sc7180/Makefile.inc +++ b/src/soc/qualcomm/sc7180/Makefile.inc @@ -28,6 +28,8 @@ romstage-y += timer.c romstage-y += gpio.c romstage-y += ../common/qclib.c +romstage-y += qclib.c +romstage-y += usb.c romstage-y += ../common/mmu.c romstage-y += mmu.c romstage-y += spi.c @@ -49,6 +51,7 @@ ramstage-$(CONFIG_DRIVERS_UART) += uart.c ramstage-$(CONFIG_SC7180_QSPI) += qspi.c ramstage-y += aop_load_reset.c +ramstage-y += usb.c ################################################################################ diff --git a/src/soc/qualcomm/sc7180/include/soc/addressmap.h b/src/soc/qualcomm/sc7180/include/soc/addressmap.h index 1a24d94..ae6bb6b 100644 --- a/src/soc/qualcomm/sc7180/include/soc/addressmap.h +++ b/src/soc/qualcomm/sc7180/include/soc/addressmap.h @@ -46,4 +46,16 @@ #define QUP_SERIAL10_BASE 0xA90000 #define QUP_SERIAL11_BASE 0xA94000 +/* + * USB BASE ADDRESSES + */ +#define QFPROM_BASE 0x00780000 +#define QUSB_PRIM_PHY_BASE 0x088e3000 +#define QUSB_PRIM_PHY_DIG_BASE 0x088e3200 +#define QMP_PHY_QSERDES_COM_REG_BASE 0x088e9000 +#define QMP_PHY_QSERDES_TX_REG_BASE 0x088e9200 +#define QMP_PHY_QSERDES_RX_REG_BASE 0x088e9400 +#define QMP_PHY_PCS_REG_BASE 0x088e9c00 +#define USB_HOST_DWC3_BASE 0x0a60c100 + #endif /* __SOC_QUALCOMM_SC7180_ADDRESS_MAP_H__ */ diff --git a/src/soc/qualcomm/sc7180/include/soc/clock.h b/src/soc/qualcomm/sc7180/include/soc/clock.h index d90779b..ae9abd2 100644 --- a/src/soc/qualcomm/sc7180/include/soc/clock.h +++ b/src/soc/qualcomm/sc7180/include/soc/clock.h @@ -76,7 +76,7 @@ struct sc7180_gpll gpll0; u8 _res0[0xf000 - 0x1000]; u32 usb30_prim_bcr; - u8 _res3[0x17000 - 0xf004]; + u8 _res1[0x17000 - 0xf004]; u32 qup_wrap0_bcr; u32 qup_wrap0_m_ahb_cbcr; u32 qup_wrap0_s_ahb_cbcr; @@ -84,33 +84,39 @@ u32 qup_wrap0_core_cdivr; u32 qup_wrap0_core_2x_cbcr; struct sc7180_rcg qup_wrap0_core_2x; - u8 _res4[0x17030 - 0x17020]; + u8 _res2[0x17030 - 0x17020]; struct sc7180_qupv3_clock qup_wrap0_s[6]; - u8 _res5[0x18000 - 0x17750]; + u8 _res3[0x18000 - 0x17750]; u32 qup_wrap1_bcr; u32 qup_wrap1_core_2x_cbcr; u32 qup_wrap1_core_cbcr; u32 qup_wrap1_m_ahb_cbcr; u32 qup_wrap1_s_ahb_cbcr; struct sc7180_qupv3_clock qup_wrap1_s[6]; - u8 _res6[0x18994 - 0x18734]; + u8 _res4[0x18994-0x18734]; u32 qup_wrap1_core_cdivr; - u8 _res7[0x4b000 - 0x18998]; + u8 _res5[0x26000-0x18998]; + u32 qusb2phy_prim_bcr; + u8 _res6[0x4B000 - 0x26004]; u32 qspi_bcr; u32 qspi_cnoc_ahb_cbcr; u32 qspi_core_cbcr; struct sc7180_rcg qspi_core; - u8 _res8[0x50000 - 0x4b014]; + u8 _res7[0x50000-0x4b014]; u32 usb3_phy_prim_bcr; u32 usb3phy_phy_prim_bcr; u32 usb3_dp_phy_prim_bcr; u32 usb3_phy_sec_bcr; u32 usb3phy_phy_sec_bcr; u32 usb3_dp_phy_sec_bcr; - u8 _res9[0x52008 - 0x50018]; + u8 _res8[0x52008-0x50018]; u32 apcs_clk_br_en1; - u8 _res10[0x1000000 - 0x5200c]; + u8 _res9[0x1000000-0x5200c]; }; +check_member(sc7180_gcc, usb30_prim_bcr, 0xf000); +check_member(sc7180_gcc, qusb2phy_prim_bcr, 0x26000); +check_member(sc7180_gcc, usb3phy_phy_prim_bcr, 0x50004); +check_member(sc7180_gcc, usb3_phy_prim_bcr, 0x50000); struct sc7180_aoss { u8 _res[0x5002c]; diff --git a/src/soc/qualcomm/sc7180/include/soc/efuse.h b/src/soc/qualcomm/sc7180/include/soc/efuse.h new file mode 100644 index 0000000..baaa971 --- /dev/null +++ b/src/soc/qualcomm/sc7180/include/soc/efuse.h @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2019 Qualcomm Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __SOC_QUALCOMM_SC7180_EFUSE_ADDRESS_MAP_H__ +#define __SOC_QUALCOMM_SC7180_EFUSE_ADDRESS_MAP_H__ + +/** + * USB EFUSE registers + */ +struct qfprom_corr { + u8 rsvd[0x4258 - 0x0]; + u32 qusb_hstx_trim_lsb; +}; +check_member(qfprom_corr, qusb_hstx_trim_lsb, 0x4258); + +#endif /* __SOC_QUALCOMM_SC7180_EFUSE_ADDRESS_MAP_H__ */ diff --git a/src/soc/qualcomm/sc7180/include/soc/usb.h b/src/soc/qualcomm/sc7180/include/soc/usb.h new file mode 100644 index 0000000..3a8816a --- /dev/null +++ b/src/soc/qualcomm/sc7180/include/soc/usb.h @@ -0,0 +1,96 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2019 Qualcomm Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <types.h> + +#ifndef _SC7180_USB_H_ +#define _SC7180_USB_H_ + +/* QSCRATCH_GENERAL_CFG register bit offset */ +#define PIPE_UTMI_CLK_SEL BIT(0) +#define PIPE3_PHYSTATUS_SW BIT(3) +#define PIPE_UTMI_CLK_DIS BIT(8) + +/* Global USB3 Control Registers */ +#define DWC3_GUSB3PIPECTL_DELAYP1TRANS BIT(18) +#define DWC3_GUSB3PIPECTL_UX_EXIT_IN_PX BIT(27) +#define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12) +#define DWC3_GCTL_PRTCAP_OTG 3 +#define DWC3_GCTL_PRTCAP_HOST 1 + +/* Global USB2 PHY Configuration Register */ +#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) ((n) << 10) +#define DWC3_GUSB2PHYCFG_USB2TRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf) +#define DWC3_GUSB2PHYCFG_PHYIF(n) ((n) << 3) +#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1) +#define USBTRDTIM_UTMI_8_BIT 9 +#define UTMI_PHYIF_8_BIT 0 + +#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4) +#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3) +#define DWC3_GCTL_DISSCRAMBLE (1 << 3) +#define DWC3_GCTL_U2EXIT_LFPS (1 << 2) +#define DWC3_GCTL_DSBLCLKGTNG (1 << 0) + +#define PORT_TUNE1_MASK 0xf0 + +/* QUSB2PHY_PWR_CTRL1 register related bits */ +#define POWER_DOWN BIT(0) + +/* DEBUG_CTRL2 register value to program VSTATUS MUX for PHY status */ +#define DEBUG_CTRL2_MUX_PLL_LOCK_STATUS 0x4 + +/* STAT5 register bits */ +#define VSTATUS_PLL_LOCK_STATUS_MASK BIT(0) + +/* QUSB PHY register values */ +#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x03 +#define QUSB2PHY_PLL_CLOCK_INVERTERS 0x7c +#define QUSB2PHY_PLL_CMODE 0x80 +#define QUSB2PHY_PLL_LOCK_DELAY 0x0a +#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0x19 +#define QUSB2PHY_PLL_BIAS_CONTROL_1 0x40 +#define QUSB2PHY_PLL_BIAS_CONTROL_2 0x22 +#define QUSB2PHY_PWR_CTRL2 0x21 +#define QUSB2PHY_IMP_CTRL1 0x08 +#define QUSB2PHY_IMP_CTRL2 0x58 +#define QUSB2PHY_PORT_TUNE1 0xc5 +#define QUSB2PHY_PORT_TUNE2 0x29 +#define QUSB2PHY_PORT_TUNE3 0xca +#define QUSB2PHY_PORT_TUNE4 0x04 +#define QUSB2PHY_PORT_TUNE5 0x03 +#define QUSB2PHY_CHG_CTRL2 0x30 + +/* USB3PHY_PCIE_USB3_PCS_PCS_STATUS bit */ +#define USB3_PCS_PHYSTATUS BIT(6) + +struct usb_board_data { + /* Register values going to override from the boardfile */ + u32 pll_bias_control_2; + u32 imp_ctrl1; + u32 port_tune1; +}; + +struct qmp_phy_init_tbl { + u32 *address; + u32 val; +}; + +void setup_usb_host0(struct usb_board_data *data); + +/* Call reset_ before setup_ */ +void reset_usb0(void); + + +#endif /* _SC7180_USB_H_ */ diff --git a/src/soc/qualcomm/sc7180/usb.c b/src/soc/qualcomm/sc7180/usb.c new file mode 100644 index 0000000..7c65830 --- /dev/null +++ b/src/soc/qualcomm/sc7180/usb.c @@ -0,0 +1,750 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2019 Qualcomm Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/mmio.h> +#include <stdlib.h> +#include <console/console.h> +#include <delay.h> +#include <soc/usb.h> +#include <soc/clock.h> +#include <soc/addressmap.h> +#include <soc/efuse.h> +#include <timer.h> + +struct usb_qusb_phy_dig { + u8 rsvd1[16]; + u32 pwr_ctrl1; + u32 pwr_ctrl2; + u8 rsvd2[8]; + u32 imp_ctrl1; + u32 imp_ctrl2; + u8 rsvd3[20]; + u32 chg_ctrl2; + u32 tune1; + u32 tune2; + u32 tune3; + u32 tune4; + u32 tune5; + u8 rsvd4[44]; + u32 debug_ctrl2; + u8 rsvd5[28]; + u32 debug_stat5; +}; +check_member(usb_qusb_phy_dig, tune5, 0x50); +check_member(usb_qusb_phy_dig, debug_ctrl2, 0x80); +check_member(usb_qusb_phy_dig, debug_stat5, 0xA0); + +struct usb_qusb_phy_pll { + u8 rsvd0[4]; + u32 analog_controls_two; + u8 rsvd1[36]; + u32 cmode; + u8 rsvd2[132]; + u32 dig_tim; + u8 rsvd3[204]; + u32 lock_delay; + u8 rsvd4[4]; + u32 clock_inverters; + u8 rsvd5[4]; + u32 bias_ctrl_1; + u32 bias_ctrl_2; +}; +check_member(usb_qusb_phy_pll, cmode, 0x2C); +check_member(usb_qusb_phy_pll, bias_ctrl_2, 0x198); +check_member(usb_qusb_phy_pll, dig_tim, 0xB4); + +/* Only for QMP V3 PHY - QSERDES COM registers */ +struct usb3_phy_qserdes_com_reg_layout { + u8 _reserved1[16]; + u32 com_ssc_en_center; + u32 com_ssc_adj_per1; + u32 com_ssc_adj_per2; + u32 com_ssc_per1; + u32 com_ssc_per2; + u32 com_ssc_step_size1; + u32 com_ssc_step_size2; + u8 _reserved2[8]; + u32 com_bias_en_clkbuflr_en; + u32 com_sys_clk_enable1; + u32 com_sys_clk_ctrl; + u32 com_sysclk_buf_enable; + u32 com_pll_en; + u32 com_pll_ivco; + u8 _reserved3[20]; + u32 com_cp_ctrl_mode0; + u8 _reserved4[4]; + u32 com_pll_rctrl_mode0; + u8 _reserved5[4]; + u32 com_pll_cctrl_mode0; + u8 _reserved6[12]; + u32 com_sysclk_en_sel; + u8 _reserved7[8]; + u32 com_resetsm_ctrl2; + u32 com_lock_cmp_en; + u32 com_lock_cmp_cfg; + u32 com_lock_cmp1_mode0; + u32 com_lock_cmp2_mode0; + u32 com_lock_cmp3_mode0; + u8 _reserved8[12]; + u32 com_dec_start_mode0; + u8 _reserved9[4]; + u32 com_div_frac_start1_mode0; + u32 com_div_frac_start2_mode0; + u32 com_div_frac_start3_mode0; + u8 _reserved10[20]; + u32 com_integloop_gain0_mode0; + u32 com_integloop_gain1_mode0; + u8 _reserved11[16]; + u32 com_vco_tune_map; + u32 com_vco_tune1_mode0; + u32 com_vco_tune2_mode0; + u8 _reserved12[60]; + u32 com_clk_select; + u32 com_hsclk_sel; + u8 _reserved13[8]; + u32 com_coreclk_div_mode0; + u8 _reserved14[8]; + u32 com_core_clk_en; + u32 com_c_ready_status; + u32 com_cmn_config; + u32 com_cmn_rate_override; + u32 com_svs_mode_clk_sel; +}; +check_member(usb3_phy_qserdes_com_reg_layout, com_ssc_en_center, 0x010); +check_member(usb3_phy_qserdes_com_reg_layout, com_ssc_adj_per1, 0x014); +check_member(usb3_phy_qserdes_com_reg_layout, com_ssc_adj_per2, 0x018); +check_member(usb3_phy_qserdes_com_reg_layout, com_ssc_per1, 0x01c); +check_member(usb3_phy_qserdes_com_reg_layout, com_ssc_per2, 0x020); +check_member(usb3_phy_qserdes_com_reg_layout, com_bias_en_clkbuflr_en, 0x034); +check_member(usb3_phy_qserdes_com_reg_layout, com_pll_ivco, 0x048); +check_member(usb3_phy_qserdes_com_reg_layout, com_cp_ctrl_mode0, 0x060); +check_member(usb3_phy_qserdes_com_reg_layout, com_sysclk_en_sel, 0x080); +check_member(usb3_phy_qserdes_com_reg_layout, com_resetsm_ctrl2, 0x08c); +check_member(usb3_phy_qserdes_com_reg_layout, com_dec_start_mode0, 0x0b0); +check_member(usb3_phy_qserdes_com_reg_layout, com_div_frac_start1_mode0, 0x0b8); +check_member(usb3_phy_qserdes_com_reg_layout, com_integloop_gain0_mode0, 0x0d8); +check_member(usb3_phy_qserdes_com_reg_layout, com_vco_tune_map, 0x0f0); +check_member(usb3_phy_qserdes_com_reg_layout, com_clk_select, 0x138); +check_member(usb3_phy_qserdes_com_reg_layout, com_coreclk_div_mode0, 0x148); +check_member(usb3_phy_qserdes_com_reg_layout, com_core_clk_en, 0x154); +check_member(usb3_phy_qserdes_com_reg_layout, com_svs_mode_clk_sel, 0x164); + +/* Only for QMP V3 PHY - TX registers */ +struct usb3_phy_qserdes_tx_reg_layout { + u8 _reserved1[68]; + u32 tx_res_code_lane_offset_tx; + u32 tx_res_code_lane_offset_rx; + u8 _reserved2[20]; + u32 tx_highz_drvr_en; + u8 _reserved3[40]; + u32 tx_lane_mode_1; + u8 _reserved4[20]; + u32 tx_rcv_detect_lvl_2; +}; +check_member(usb3_phy_qserdes_tx_reg_layout, tx_res_code_lane_offset_tx, 0x044); +check_member(usb3_phy_qserdes_tx_reg_layout, tx_res_code_lane_offset_rx, 0x048); +check_member(usb3_phy_qserdes_tx_reg_layout, tx_highz_drvr_en, 0x060); +check_member(usb3_phy_qserdes_tx_reg_layout, tx_lane_mode_1, 0x08c); +check_member(usb3_phy_qserdes_tx_reg_layout, tx_rcv_detect_lvl_2, 0x0a4); + +/* Only for QMP V3 PHY - RX registers */ +struct usb3_phy_qserdes_rx_reg_layout { + u8 _reserved1[8]; + u32 rx_ucdr_fo_gain; + u32 rx_ucdr_so_gain_half; + u8 _reserved2[32]; + u32 rx_ucdr_fastlock_fo_gain; + u32 rx_ucdr_so_saturtn_and_en; + u8 _reserved3[12]; + u32 rx_ucdr_pi_cntrls; + u8 _reserved4[120]; + u32 rx_vga_cal_ctrl2; + u8 _reserved5[16]; + u32 rx_rx_equ_adap_ctrl2; + u32 rx_rx_equ_adap_ctrl3; + u32 rx_rx_equ_adap_ctrl4; + u8 _reserved6[24]; + u32 rx_rx_eq_offset_adap_ctrl1; + u32 rx_rx_offset_adap_ctrl2; + u32 rx_sigdet_enables; + u32 rx_sigdet_ctrl; + u8 _reserved7[4]; + u32 rx_sigdet_deglitch_ctrl; + u32 rx_rx_band; + u8 _reserved8[80]; + u32 rx_rx_mode_00; +}; +check_member(usb3_phy_qserdes_rx_reg_layout, rx_ucdr_fo_gain, 0x008); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_ucdr_so_gain_half, 0x00c); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_ucdr_fastlock_fo_gain, 0x030); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_ucdr_so_saturtn_and_en, 0x034); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_ucdr_pi_cntrls, 0x044); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_vga_cal_ctrl2, 0x0c0); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_equ_adap_ctrl2, 0x0d4); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_equ_adap_ctrl3, 0x0d8); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_equ_adap_ctrl4, 0x0dc); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_eq_offset_adap_ctrl1, 0x0f8); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_offset_adap_ctrl2, 0x0fc); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_sigdet_enables, 0x100); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_sigdet_ctrl, 0x104); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_sigdet_deglitch_ctrl, 0x10c); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_band, 0x110); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_mode_00, 0x164); + +/* Only for QMP V3 PHY - PCS registers */ +struct usb3_phy_pcs_reg_layout { + u32 pcs_sw_reset; + u32 pcs_power_down_control; + u32 pcs_start_control; + u32 pcs_txmgn_v0; + u32 pcs_txmgn_v1; + u32 pcs_txmgn_v2; + u32 pcs_txmgn_v3; + u32 pcs_txmgn_v4; + u32 pcs_txmgn_ls; + u32 pcs_txdeemph_m6db_v0; + u32 pcs_txdeemph_m3p5db_v0; + u32 pcs_txdeemph_m6db_v1; + u32 pcs_txdeemph_m3p5db_v1; + u32 pcs_txdeemph_m6db_v2; + u32 pcs_txdeemph_m3p5db_v2; + u32 pcs_txdeemph_m6db_v3; + u32 pcs_txdeemph_m3p5db_v3; + u32 pcs_txdeemph_m6db_v4; + u32 pcs_txdeemph_m3p5db_v4; + u32 pcs_txdeemph_m6db_ls; + u32 pcs_txdeemph_m3p5db_ls; + u8 _reserved1[8]; + u32 pcs_rate_slew_cntrl; + u8 _reserved2[4]; + u32 pcs_power_state_config2; + u8 _reserved3[8]; + u32 pcs_rcvr_dtct_dly_p1u2_l; + u32 pcs_rcvr_dtct_dly_p1u2_h; + u32 pcs_rcvr_dtct_dly_u3_l; + u32 pcs_rcvr_dtct_dly_u3_h; + u32 pcs_lock_detect_config1; + u32 pcs_lock_detect_config2; + u32 pcs_lock_detect_config3; + u32 pcs_tsync_rsync_time; + u8 _reserved4[16]; + u32 pcs_pwrup_reset_dly_time_auxclk; + u8 _reserved5[12]; + u32 pcs_lfps_ecstart_eqtlock; + u8 _reserved6[4]; + u32 pcs_rxeqtraining_wait_time; + u32 pcs_rxeqtraining_run_time; + u8 _reserved7[4]; + u32 pcs_fll_ctrl1; + u32 pcs_fll_ctrl2; + u32 pcs_fll_cnt_val_l; + u32 pcs_fll_cnt_val_h_tol; + u32 pcs_fll_man_code; + u32 pcs_autonomous_mode_ctrl; + u8 _reserved8[152]; + u32 pcs_ready_status; + u8 _reserved9[96]; + u32 pcs_rx_sigdet_lvl; + u8 _reserved10[48]; + u32 pcs_refgen_req_config1; + u32 pcs_refgen_req_config2; +}; +check_member(usb3_phy_pcs_reg_layout, pcs_sw_reset, 0x000); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_v0, 0x00c); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_v1, 0x010); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_v2, 0x014); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_v3, 0x018); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_v4, 0x01c); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_ls, 0x020); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_v0, 0x024); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_v0, 0x028); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_v1, 0x02c); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_v1, 0x030); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_v2, 0x034); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_v2, 0x038); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_v3, 0x03c); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_v3, 0x040); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_v4, 0x044); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_v4, 0x048); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_ls, 0x04c); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_ls, 0x050); +check_member(usb3_phy_pcs_reg_layout, pcs_rate_slew_cntrl, 0x05c); +check_member(usb3_phy_pcs_reg_layout, pcs_power_state_config2, 0x064); +check_member(usb3_phy_pcs_reg_layout, pcs_rcvr_dtct_dly_p1u2_l, 0x070); +check_member(usb3_phy_pcs_reg_layout, pcs_rcvr_dtct_dly_p1u2_h, 0x074); +check_member(usb3_phy_pcs_reg_layout, pcs_rcvr_dtct_dly_u3_l, 0x078); +check_member(usb3_phy_pcs_reg_layout, pcs_rcvr_dtct_dly_u3_h, 0x07c); +check_member(usb3_phy_pcs_reg_layout, pcs_lock_detect_config1, 0x080); +check_member(usb3_phy_pcs_reg_layout, pcs_lock_detect_config2, 0x084); +check_member(usb3_phy_pcs_reg_layout, pcs_lock_detect_config3, 0x088); +check_member(usb3_phy_pcs_reg_layout, pcs_pwrup_reset_dly_time_auxclk, 0x0a0); +check_member(usb3_phy_pcs_reg_layout, pcs_rxeqtraining_wait_time, 0x0b8); +check_member(usb3_phy_pcs_reg_layout, pcs_fll_cnt_val_h_tol, 0x0d0); +check_member(usb3_phy_pcs_reg_layout, pcs_autonomous_mode_ctrl, 0x0d8); +check_member(usb3_phy_pcs_reg_layout, pcs_ready_status, 0x174); +check_member(usb3_phy_pcs_reg_layout, pcs_refgen_req_config2, 0x210); + +static struct usb3_phy_qserdes_com_reg_layout *const qserdes_com_reg_layout = + (void *)QMP_PHY_QSERDES_COM_REG_BASE; +static struct usb3_phy_qserdes_tx_reg_layout *const qserdes_tx_reg_layout = + (void *)QMP_PHY_QSERDES_TX_REG_BASE; +static struct usb3_phy_qserdes_rx_reg_layout *const qserdes_rx_reg_layout = + (void *)QMP_PHY_QSERDES_RX_REG_BASE; +static struct usb3_phy_pcs_reg_layout *const pcs_reg_layout = + (void *)QMP_PHY_PCS_REG_BASE; + + + +struct usb_dwc3 { + u32 sbuscfg0; + u32 sbuscfg1; + u32 txthrcfg; + u32 rxthrcfg; + u32 ctl; + u32 pmsts; + u32 sts; + u32 uctl1; + u32 snpsid; + u32 gpio; + u32 uid; + u32 uctl; + u64 buserraddr; + u64 prtbimap; + u8 reserved1[32]; + u32 dbgfifospace; + u32 dbgltssm; + u32 dbglnmcc; + u32 dbgbmu; + u32 dbglspmux; + u32 dbglsp; + u32 dbgepinfo0; + u32 dbgepinfo1; + u64 prtbimap_hs; + u64 prtbimap_fs; + u8 reserved2[112]; + u32 usb2phycfg; + u8 reserved3[124]; + u32 usb2phyacc; + u8 reserved4[60]; + u32 usb3pipectl; + u8 reserved5[60]; +}; +check_member(usb_dwc3, usb3pipectl, 0x1c0); + +static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = { + {&qserdes_com_reg_layout->com_pll_ivco, 0x07}, + {&qserdes_com_reg_layout->com_sysclk_en_sel, 0x14}, + {&qserdes_com_reg_layout->com_bias_en_clkbuflr_en, 0x08}, + {&qserdes_com_reg_layout->com_clk_select, 0x30}, + {&qserdes_com_reg_layout->com_sys_clk_ctrl, 0x02}, + {&qserdes_com_reg_layout->com_resetsm_ctrl2, 0x08}, + {&qserdes_com_reg_layout->com_cmn_config, 0x16}, + {&qserdes_com_reg_layout->com_svs_mode_clk_sel, 0x01}, + {&qserdes_com_reg_layout->com_hsclk_sel, 0x80}, + {&qserdes_com_reg_layout->com_dec_start_mode0, 0x82}, + {&qserdes_com_reg_layout->com_div_frac_start1_mode0, 0xab}, + {&qserdes_com_reg_layout->com_div_frac_start2_mode0, 0xea}, + {&qserdes_com_reg_layout->com_div_frac_start3_mode0, 0x02}, + {&qserdes_com_reg_layout->com_cp_ctrl_mode0, 0x06}, + {&qserdes_com_reg_layout->com_pll_rctrl_mode0, 0x16}, + {&qserdes_com_reg_layout->com_pll_cctrl_mode0, 0x36}, + {&qserdes_com_reg_layout->com_integloop_gain1_mode0, 0x00}, + {&qserdes_com_reg_layout->com_integloop_gain0_mode0, 0x3f}, + {&qserdes_com_reg_layout->com_vco_tune2_mode0, 0x01}, + {&qserdes_com_reg_layout->com_vco_tune1_mode0, 0xc9}, + {&qserdes_com_reg_layout->com_coreclk_div_mode0, 0x0a}, + {&qserdes_com_reg_layout->com_lock_cmp3_mode0, 0x00}, + {&qserdes_com_reg_layout->com_lock_cmp2_mode0, 0x34}, + {&qserdes_com_reg_layout->com_lock_cmp1_mode0, 0x15}, + {&qserdes_com_reg_layout->com_lock_cmp_en, 0x04}, + {&qserdes_com_reg_layout->com_core_clk_en, 0x00}, + {&qserdes_com_reg_layout->com_lock_cmp_cfg, 0x00}, + {&qserdes_com_reg_layout->com_vco_tune_map, 0x00}, + {&qserdes_com_reg_layout->com_sysclk_buf_enable, 0x0a}, + {&qserdes_com_reg_layout->com_ssc_en_center, 0x01}, + {&qserdes_com_reg_layout->com_ssc_per1, 0x31}, + {&qserdes_com_reg_layout->com_ssc_per2, 0x01}, + {&qserdes_com_reg_layout->com_ssc_adj_per1, 0x00}, + {&qserdes_com_reg_layout->com_ssc_adj_per2, 0x00}, + {&qserdes_com_reg_layout->com_ssc_step_size1, 0x85}, + {&qserdes_com_reg_layout->com_ssc_step_size2, 0x07}, +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = { + {&qserdes_tx_reg_layout->tx_highz_drvr_en, 0x10}, + {&qserdes_tx_reg_layout->tx_rcv_detect_lvl_2, 0x12}, + {&qserdes_tx_reg_layout->tx_lane_mode_1, 0x16}, + {&qserdes_tx_reg_layout->tx_res_code_lane_offset_rx, 0x09}, + {&qserdes_tx_reg_layout->tx_res_code_lane_offset_tx, 0x06}, +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = { + {&qserdes_rx_reg_layout->rx_ucdr_fastlock_fo_gain, 0x0b}, + {&qserdes_rx_reg_layout->rx_rx_equ_adap_ctrl2, 0x0f}, + {&qserdes_rx_reg_layout->rx_rx_equ_adap_ctrl3, 0x4e}, + {&qserdes_rx_reg_layout->rx_rx_equ_adap_ctrl4, 0x18}, + {&qserdes_rx_reg_layout->rx_rx_eq_offset_adap_ctrl1, 0x77}, + {&qserdes_rx_reg_layout->rx_rx_offset_adap_ctrl2, 0x80}, + {&qserdes_rx_reg_layout->rx_sigdet_ctrl, 0x03}, + {&qserdes_rx_reg_layout->rx_sigdet_deglitch_ctrl, 0x16}, + {&qserdes_rx_reg_layout->rx_ucdr_so_saturtn_and_en, 0x75}, + {&qserdes_rx_reg_layout->rx_ucdr_pi_cntrls, 0x80}, + {&qserdes_rx_reg_layout->rx_ucdr_fo_gain, 0x0a}, + {&qserdes_rx_reg_layout->rx_ucdr_so_gain_half, 0x06}, + {&qserdes_rx_reg_layout->rx_sigdet_enables, 0x00}, +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = { + /* FLL settings */ + {&pcs_reg_layout->pcs_fll_ctrl2, 0x83}, + {&pcs_reg_layout->pcs_fll_cnt_val_l, 0x09}, + {&pcs_reg_layout->pcs_fll_cnt_val_h_tol, 0xa2}, + {&pcs_reg_layout->pcs_fll_man_code, 0x40}, + {&pcs_reg_layout->pcs_fll_ctrl1, 0x02}, + + /* Lock Det settings */ + {&pcs_reg_layout->pcs_lock_detect_config1, 0xd1}, + {&pcs_reg_layout->pcs_lock_detect_config2, 0x1f}, + {&pcs_reg_layout->pcs_lock_detect_config3, 0x47}, + {&pcs_reg_layout->pcs_power_state_config2, 0x1b}, + + {&pcs_reg_layout->pcs_rx_sigdet_lvl, 0xba}, + {&pcs_reg_layout->pcs_txmgn_v0, 0x9f}, + {&pcs_reg_layout->pcs_txmgn_v1, 0x9f}, + {&pcs_reg_layout->pcs_txmgn_v2, 0xb7}, + {&pcs_reg_layout->pcs_txmgn_v3, 0x4e}, + {&pcs_reg_layout->pcs_txmgn_v4, 0x65}, + {&pcs_reg_layout->pcs_txmgn_ls, 0x6b}, + {&pcs_reg_layout->pcs_txdeemph_m6db_v0, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_v0, 0x0d}, + {&pcs_reg_layout->pcs_txdeemph_m6db_v1, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_v1, 0x0d}, + {&pcs_reg_layout->pcs_txdeemph_m6db_v2, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_v2, 0x0d}, + {&pcs_reg_layout->pcs_txdeemph_m6db_v3, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_v3, 0x1d}, + {&pcs_reg_layout->pcs_txdeemph_m6db_v4, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_v4, 0x0d}, + {&pcs_reg_layout->pcs_txdeemph_m6db_ls, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_ls, 0x0d}, + {&pcs_reg_layout->pcs_rate_slew_cntrl, 0x02}, + {&pcs_reg_layout->pcs_pwrup_reset_dly_time_auxclk, 0x04}, + {&pcs_reg_layout->pcs_tsync_rsync_time, 0x44}, + {&pcs_reg_layout->pcs_rcvr_dtct_dly_p1u2_l, 0xe7}, + {&pcs_reg_layout->pcs_rcvr_dtct_dly_p1u2_h, 0x03}, + {&pcs_reg_layout->pcs_rcvr_dtct_dly_u3_l, 0x40}, + {&pcs_reg_layout->pcs_rcvr_dtct_dly_u3_h, 0x00}, + {&pcs_reg_layout->pcs_rxeqtraining_wait_time, 0x75}, + {&pcs_reg_layout->pcs_lfps_ecstart_eqtlock, 0x86}, + {&pcs_reg_layout->pcs_rxeqtraining_run_time, 0x13}, +}; + + + +struct usb_dwc3_cfg { + struct usb_dwc3 *usb_host_dwc3; + struct usb_qusb_phy_pll *qusb_phy_pll; + struct usb_qusb_phy_dig *qusb_phy_dig; + /* Init sequence for QMP PHY blocks - serdes, tx, rx, pcs */ + const struct qmp_phy_init_tbl *serdes_tbl; + int serdes_tbl_num; + const struct qmp_phy_init_tbl *tx_tbl; + int tx_tbl_num; + const struct qmp_phy_init_tbl *rx_tbl; + int rx_tbl_num; + const struct qmp_phy_init_tbl *pcs_tbl; + int pcs_tbl_num; + struct usb3_phy_pcs_reg_layout *qmp_pcs_reg; + + u32 *usb3_bcr; + u32 *qusb2phy_bcr; + u32 *gcc_usb3phy_bcr_reg; + u32 *gcc_qmpphy_bcr_reg; + struct usb_board_data *board_data; + u32 efuse_offset; +}; + +static struct usb_dwc3_cfg usb_port0 = { + .usb_host_dwc3 = (void *)USB_HOST_DWC3_BASE, + .qusb_phy_pll = (void *)QUSB_PRIM_PHY_BASE, + .qusb_phy_dig = (void *)QUSB_PRIM_PHY_DIG_BASE, + .serdes_tbl = qmp_v3_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl), + .tx_tbl = qmp_v3_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl), + .rx_tbl = qmp_v3_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl), + .pcs_tbl = qmp_v3_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl), + .qmp_pcs_reg = (void *)QMP_PHY_PCS_REG_BASE, + .usb3_bcr = &gcc->usb30_prim_bcr, + .qusb2phy_bcr = &gcc->qusb2phy_prim_bcr, + .gcc_usb3phy_bcr_reg = &gcc->usb3_dp_phy_prim_bcr, + .gcc_qmpphy_bcr_reg = &gcc->usb3_phy_prim_bcr, + .efuse_offset = 25, +}; + + +static struct qfprom_corr * const qfprom_corr_efuse = (void *)QFPROM_BASE; + +static void reset_usb(struct usb_dwc3_cfg *dwc3) +{ + /* Assert Core reset */ + clock_reset_bcr(dwc3->usb3_bcr, 1); + + /* Assert QUSB PHY reset */ + clock_reset_bcr(dwc3->qusb2phy_bcr, 1); + + /* Assert QMP PHY reset */ + clock_reset_bcr(dwc3->gcc_usb3phy_bcr_reg, 1); + clock_reset_bcr(dwc3->gcc_qmpphy_bcr_reg, 1); +} + +void reset_usb0(void) +{ + /* Before Resetting PHY, put Core in Reset */ + printk(BIOS_INFO, "Starting DWC3 and PHY resets for USB(0)\n"); + + reset_usb(&usb_port0); +} + + +/* + * Update board specific PHY tuning override values that specified from + * board file. + */ +static void qusb2_phy_override_phy_params(struct usb_dwc3_cfg *dwc3) +{ + /* Override preemphasis value */ + write32(&dwc3->qusb_phy_dig->tune1, + dwc3->board_data->port_tune1); + + /* Override BIAS_CTRL_2 to reduce the TX swing overshooting. */ + write32(&dwc3->qusb_phy_pll->bias_ctrl_2, + dwc3->board_data->pll_bias_control_2); + + /* Override IMP_RES_OFFSET value */ + write32(&dwc3->qusb_phy_dig->imp_ctrl1, + dwc3->board_data->imp_ctrl1); +} + +/* + * Fetches HS Tx tuning value from efuse register and sets the + * QUSB2PHY_PORT_TUNE1/2 register. + * For error case, skip setting the value and use the default value. + */ +static void qusb2_phy_set_tune_param(struct usb_dwc3_cfg *dwc3) +{ + /* + * Efuse registers 3 bit value specifies tuning for HSTX + * output current in TUNE1 Register. Hence Extract 3 bits from + * EFUSE at correct position. + */ + + const int efuse_bits = 3; + int bit_pos = dwc3->efuse_offset; + + u32 bit_mask = (1 << efuse_bits) - 1; + u32 tune_val = + (read32(&qfprom_corr_efuse->qusb_hstx_trim_lsb) >> bit_pos) + & bit_mask; + /* + * if efuse reg is updated (i.e non-zero) then use it to program + * tune parameters. + */ + if (tune_val) + clrsetbits_le32(&dwc3->qusb_phy_dig->tune1, + PORT_TUNE1_MASK, tune_val << 4); +} + +static void tune_phy(struct usb_dwc3_cfg *dwc3, struct usb_qusb_phy_dig *phy) +{ + write32(&phy->pwr_ctrl2, QUSB2PHY_PWR_CTRL2); + /* IMP_CTRL1: Control the impedance reduction */ + write32(&phy->imp_ctrl1, QUSB2PHY_IMP_CTRL1); + /* IMP_CTRL2: Impedance offset/mapping slope */ + write32(&phy->imp_ctrl2, QUSB2PHY_IMP_CTRL1); + write32(&phy->chg_ctrl2, QUSB2PHY_IMP_CTRL2); + /* + * TUNE1: Sets HS Impedance to approx 45 ohms + * then override with efuse value. + */ + write32(&phy->tune1, QUSB2PHY_PORT_TUNE1); + /* TUNE2: Tuning for HS Disconnect Level */ + write32(&phy->tune2, QUSB2PHY_PORT_TUNE2); + /* TUNE3: Tune squelch range */ + write32(&phy->tune3, QUSB2PHY_PORT_TUNE3); + /* TUNE4: Sets EOP_DLY(Squelch rising edge to linestate falling edge) */ + write32(&phy->tune4, QUSB2PHY_PORT_TUNE4); + write32(&phy->tune5, QUSB2PHY_PORT_TUNE5); + + if (dwc3->board_data) { + /* Override board specific PHY tuning values */ + qusb2_phy_override_phy_params(dwc3); + + /* Set efuse value for tuning the PHY */ + qusb2_phy_set_tune_param(dwc3); + } +} + +static void hs_qusb_phy_init(struct usb_dwc3_cfg *dwc3) +{ + /* PWR_CTRL: set the power down bit to disable the PHY */ + setbits_le32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN); + + write32(&dwc3->qusb_phy_pll->analog_controls_two, + QUSB2PHY_PLL_ANALOG_CONTROLS_TWO); + write32(&dwc3->qusb_phy_pll->clock_inverters, + QUSB2PHY_PLL_CLOCK_INVERTERS); + write32(&dwc3->qusb_phy_pll->cmode, + QUSB2PHY_PLL_CMODE); + write32(&dwc3->qusb_phy_pll->lock_delay, + QUSB2PHY_PLL_LOCK_DELAY); + write32(&dwc3->qusb_phy_pll->dig_tim, + QUSB2PHY_PLL_DIGITAL_TIMERS_TWO); + write32(&dwc3->qusb_phy_pll->bias_ctrl_1, + QUSB2PHY_PLL_BIAS_CONTROL_1); + write32(&dwc3->qusb_phy_pll->bias_ctrl_2, + QUSB2PHY_PLL_BIAS_CONTROL_2); + + tune_phy(dwc3, dwc3->qusb_phy_dig); + + /* PWR_CTRL1: Clear the power down bit to enable the PHY */ + clrbits_le32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN); + + write32(&dwc3->qusb_phy_dig->debug_ctrl2, + DEBUG_CTRL2_MUX_PLL_LOCK_STATUS); + + /* + * DEBUG_STAT5: wait for 160uS for PLL lock; + * vstatus[0] changes from 0 to 1. + */ + long lock_us = wait_us(160, read32(&dwc3->qusb_phy_dig->debug_stat5) & + VSTATUS_PLL_LOCK_STATUS_MASK); + if (!lock_us) + printk(BIOS_ERR, "ERROR: QUSB PHY PLL LOCK fails\n"); + else + printk(BIOS_DEBUG, "QUSB PHY initialized and locked in %ldus\n", + lock_us); +} + +static void qcom_qmp_phy_configure(const struct qmp_phy_init_tbl tbl[], + int num) +{ + int i; + const struct qmp_phy_init_tbl *t = tbl; + + if (!t) + return; + + for (i = 0; i < num; i++, t++) + write32(t->address, t->val); +} + +static void ss_qmp_phy_init(struct usb_dwc3_cfg *dwc3) +{ + /* power up USB3 PHY */ + write32(&dwc3->qmp_pcs_reg->pcs_power_down_control, 0x01); + + /* Serdes configuration */ + qcom_qmp_phy_configure(dwc3->serdes_tbl, dwc3->serdes_tbl_num); + /* Tx, Rx, and PCS configurations */ + qcom_qmp_phy_configure(dwc3->tx_tbl, dwc3->tx_tbl_num); + qcom_qmp_phy_configure(dwc3->rx_tbl, dwc3->rx_tbl_num); + qcom_qmp_phy_configure(dwc3->pcs_tbl, dwc3->pcs_tbl_num); + + /* perform software reset of PCS/Serdes */ + write32(&dwc3->qmp_pcs_reg->pcs_sw_reset, 0x00); + /* start PCS/Serdes to operation mode */ + write32(&dwc3->qmp_pcs_reg->pcs_start_control, 0x03); + + /* + * Wait for PHY initialization to be done + * PCS_STATUS: wait for 1ms for PHY STATUS; + * SW can continuously check for PHYSTATUS = 1.b0. + */ + long lock_us = wait_us(1000, + !(read32(&dwc3->qmp_pcs_reg->pcs_ready_status) & + USB3_PCS_PHYSTATUS)); + if (!lock_us) + printk(BIOS_ERR, "ERROR: QMP PHY PLL LOCK fails:\n"); + else + printk(BIOS_DEBUG, "QMP PHY initialized and locked in %ldus\n", + lock_us); +} + +static void setup_dwc3(struct usb_dwc3 *dwc3) +{ + /* core exits U1/U2/U3 only in PHY power state P1/P2/P3 respectively */ + clrsetbits_le32(&dwc3->usb3pipectl, + DWC3_GUSB3PIPECTL_DELAYP1TRANS, + DWC3_GUSB3PIPECTL_UX_EXIT_IN_PX); + + /* + * Configure USB phy interface of DWC3 core. + * 1. Select UTMI+ PHY with 16-bit interface. + * 2. Set USBTRDTIM to the corresponding value + * according to the UTMI+ PHY interface. + */ + clrsetbits_le32(&dwc3->usb2phycfg, + (DWC3_GUSB2PHYCFG_USB2TRDTIM_MASK | + DWC3_GUSB2PHYCFG_PHYIF_MASK), + (DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) | + DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT))); + + clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_SCALEDOWN_MASK | + DWC3_GCTL_DISSCRAMBLE), + DWC3_GCTL_U2EXIT_LFPS | DWC3_GCTL_DSBLCLKGTNG); + + /* configure controller in Host mode */ + clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)), + DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_HOST)); + printk(BIOS_SPEW, "Configure USB in Host mode\n"); +} + +/* Initialization of DWC3 Core and PHY */ +static void setup_usb_host(struct usb_dwc3_cfg *dwc3, + struct usb_board_data *board_data) +{ + dwc3->board_data = board_data; + + /* Clear core reset. */ + clock_reset_bcr(dwc3->usb3_bcr, 0); + + /* Clear QUSB PHY reset. */ + clock_reset_bcr(dwc3->qusb2phy_bcr, 0); + + /* Initialize QUSB PHY */ + hs_qusb_phy_init(dwc3); + + /* Clear QMP PHY resets. */ + clock_reset_bcr(dwc3->gcc_usb3phy_bcr_reg, 0); + clock_reset_bcr(dwc3->gcc_qmpphy_bcr_reg, 0); + + /* Initialize QMP PHY */ + ss_qmp_phy_init(dwc3); + + setup_dwc3(dwc3->usb_host_dwc3); + + printk(BIOS_INFO, "DWC3 and PHY setup finished\n"); +} + +void setup_usb_host0(struct usb_board_data *board_data) +{ + printk(BIOS_INFO, "Setting up USB HOST0 controller.\n"); + setup_usb_host(&usb_port0, board_data); +} + + -- To view, visit https://review.coreboot.org/c/coreboot/+/35503 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0651fc28dc227efbeb23eeefe9b96a3b940ae995 Gerrit-Change-Number: 35503 Gerrit-PatchSet: 1 Gerrit-Owner: mturney mturney <mturney(a)codeaurora.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: mturney mturney <mturney(a)codeaurora.org> Gerrit-MessageType: newchange

4 13

Change in coreboot[master]: sc7180: Add AOP firmware support
by mturney mturney (Code Review) 05 Dec '19

05 Dec '19

Hello ashk(a)codeaurora.org, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/35502 to review the following change. Change subject: sc7180: Add AOP firmware support ...................................................................... sc7180: Add AOP firmware support Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/25210/85 Change-Id: I1cd552fbf03b5135e5911f1143f8778cad81e360 Signed-off-by: ashk <ashk(a)codeaurora.org> --- M src/soc/qualcomm/sc7180/Makefile.inc A src/soc/qualcomm/sc7180/aop_load_reset.c A src/soc/qualcomm/sc7180/include/soc/aop.h M src/soc/qualcomm/sc7180/include/soc/memlayout.ld M src/soc/qualcomm/sc7180/include/soc/symbols.h M src/soc/qualcomm/sc7180/mmu.c M src/soc/qualcomm/sc7180/soc.c 7 files changed, 89 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/35502/1 diff --git a/src/soc/qualcomm/sc7180/Makefile.inc b/src/soc/qualcomm/sc7180/Makefile.inc index 7ad0328..d8fc33a 100644 --- a/src/soc/qualcomm/sc7180/Makefile.inc +++ b/src/soc/qualcomm/sc7180/Makefile.inc @@ -48,6 +48,7 @@ ramstage-y += qcom_qup_se.c ramstage-$(CONFIG_DRIVERS_UART) += uart.c ramstage-$(CONFIG_SC7180_QSPI) += qspi.c +ramstage-y += aop_load_reset.c ################################################################################ diff --git a/src/soc/qualcomm/sc7180/aop_load_reset.c b/src/soc/qualcomm/sc7180/aop_load_reset.c new file mode 100644 index 0000000..8d22d62 --- /dev/null +++ b/src/soc/qualcomm/sc7180/aop_load_reset.c @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <string.h> +#include <arch/cache.h> +#include <cbfs.h> +#include <halt.h> +#include <console/console.h> +#include <timestamp.h> +#include <soc/mmu.h> +#include <soc/aop.h> +#include <soc/clock.h> + +void aop_fw_load_reset(void) +{ + bool aop_fw_entry; + + struct prog aop_fw_prog = + PROG_INIT(PROG_PAYLOAD, CONFIG_CBFS_PREFIX "/aop"); + + if (prog_locate(&aop_fw_prog)) + die("SOC image: AOP_FW not found"); + + aop_fw_entry = selfload(&aop_fw_prog); + if (!aop_fw_entry) + die("SOC image: AOP load failed"); + + clock_reset_aop(); + + printk(BIOS_DEBUG, "\nSOC:AOP brought out of reset.\n"); +} diff --git a/src/soc/qualcomm/sc7180/include/soc/aop.h b/src/soc/qualcomm/sc7180/include/soc/aop.h new file mode 100644 index 0000000..5573163 --- /dev/null +++ b/src/soc/qualcomm/sc7180/include/soc/aop.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_QUALCOMM_SC7180_AOP_H__ +#define _SOC_QUALCOMM_SC7180_AOP_H__ + +void aop_fw_load_reset(void); + +#endif // _SOC_QUALCOMM_SC7180_AOP_H__ diff --git a/src/soc/qualcomm/sc7180/include/soc/memlayout.ld b/src/soc/qualcomm/sc7180/include/soc/memlayout.ld index ae00816..f4e6f05 100644 --- a/src/soc/qualcomm/sc7180/include/soc/memlayout.ld +++ b/src/soc/qualcomm/sc7180/include/soc/memlayout.ld @@ -24,8 +24,24 @@ #define BSRAM_START(addr) SYMBOL(bsram, addr) #define BSRAM_END(addr) SYMBOL(ebsram, addr) +/* AOP : 0x0B000000 - 0x0B100000 */ +#define AOPSRAM_START(addr) SYMBOL(aopsram, addr) +#define AOPSRAM_END(addr) SYMBOL(eaopsram, addr) + +/* AOPMSG : 0x0C300000 - 0x0C400000 */ +#define AOPMSG_START(addr) SYMBOL(aopmsg, addr) +#define AOPMSG_END(addr) SYMBOL(eaopmsg, addr) + SECTIONS { + AOPSRAM_START(0x0B000000) + REGION(aop, 0x0B000000, 0x100000, 4096) + AOPSRAM_END(0x0B100000) + + AOPMSG_START(0x0C300000) + REGION(aop_ss_msg_ram_drv15, 0x0C3F0000, 0x400, 0x100) + AOPMSG_END(0x0C400000) + SSRAM_START(0x14680000) OVERLAP_VERSTAGE_ROMSTAGE(0x14680000, 100K) REGION(qcsdi, 0x14699000, 52K, 4K) diff --git a/src/soc/qualcomm/sc7180/include/soc/symbols.h b/src/soc/qualcomm/sc7180/include/soc/symbols.h index 14b779f..893ecc3 100644 --- a/src/soc/qualcomm/sc7180/include/soc/symbols.h +++ b/src/soc/qualcomm/sc7180/include/soc/symbols.h @@ -26,5 +26,7 @@ DECLARE_REGION(dcb); DECLARE_REGION(pmic); DECLARE_REGION(limits_cfg); +DECLARE_REGION(aop); +DECLARE_REGION(aop_ss_msg_ram_drv15); #endif /* _SOC_QUALCOMM_SC7180_SYMBOLS_H_ */ diff --git a/src/soc/qualcomm/sc7180/mmu.c b/src/soc/qualcomm/sc7180/mmu.c index fd59a5a..2eb8c86 100644 --- a/src/soc/qualcomm/sc7180/mmu.c +++ b/src/soc/qualcomm/sc7180/mmu.c @@ -33,3 +33,7 @@ mmu_enable(); } +void soc_mmu_dram_config_post_dram_init(void) +{ + mmu_config_range((void *)_aop, REGION_SIZE(aop), CACHED_RAM); +} diff --git a/src/soc/qualcomm/sc7180/soc.c b/src/soc/qualcomm/sc7180/soc.c index 4fc5b30..7039935 100644 --- a/src/soc/qualcomm/sc7180/soc.c +++ b/src/soc/qualcomm/sc7180/soc.c @@ -18,6 +18,7 @@ #include <soc/mmu.h> #include <soc/mmu_common.h> #include <soc/symbols.h> +#include <soc/aop.h> static void soc_read_resources(struct device *dev) { @@ -34,7 +35,7 @@ static void soc_init(struct device *dev) { - + aop_fw_load_reset(); } static struct device_operations soc_ops = { -- To view, visit https://review.coreboot.org/c/coreboot/+/35502 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I1cd552fbf03b5135e5911f1143f8778cad81e360 Gerrit-Change-Number: 35502 Gerrit-PatchSet: 1 Gerrit-Owner: mturney mturney <mturney(a)codeaurora.org> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: ashk(a)codeaurora.org Gerrit-Reviewer: mturney mturney <mturney(a)codeaurora.org> Gerrit-MessageType: newchange

4 9

Change in coreboot[master]: sc7180: Add SPI-NOR support
by mturney mturney (Code Review) 05 Dec '19

05 Dec '19

mturney mturney has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35501 ) Change subject: sc7180: Add SPI-NOR support ...................................................................... sc7180: Add SPI-NOR support This implements the SPI-NOR driver for the Qualcomm QSPI core. Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/27483/58 Change-Id: I2eb8cf90aa4559541ba293b3fd2870896bed20b7 Signed-off-by: Akash Asthana <akashast(a)codeaurora.org> --- M src/soc/qualcomm/sc7180/Kconfig M src/soc/qualcomm/sc7180/Makefile.inc M src/soc/qualcomm/sc7180/bootblock.c A src/soc/qualcomm/sc7180/include/soc/qspi.h A src/soc/qualcomm/sc7180/qspi.c M src/soc/qualcomm/sc7180/spi.c 6 files changed, 452 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/01/35501/1 diff --git a/src/soc/qualcomm/sc7180/Kconfig b/src/soc/qualcomm/sc7180/Kconfig index a1a7f03..df5d116 100644 --- a/src/soc/qualcomm/sc7180/Kconfig +++ b/src/soc/qualcomm/sc7180/Kconfig @@ -28,4 +28,13 @@ help Select the QUP instance to be used for UART console output. +config SC7180_QSPI + bool + default y if COMMON_CBFS_SPI_WRAPPER + prompt "Build Flash Using SPI-NOR" + +config BOOT_DEVICE_SPI_FLASH_BUS + int + default 16 + endif diff --git a/src/soc/qualcomm/sc7180/Makefile.inc b/src/soc/qualcomm/sc7180/Makefile.inc index 5a4b68c..7ad0328 100644 --- a/src/soc/qualcomm/sc7180/Makefile.inc +++ b/src/soc/qualcomm/sc7180/Makefile.inc @@ -12,6 +12,7 @@ bootblock-y += qupv3_fw_config.c bootblock-y += qupv3_config.c bootblock-y += qcom_qup_se.c +bootblock-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ verstage-y += timer.c @@ -20,6 +21,7 @@ verstage-y += clock.c verstage-y += qcom_qup_se.c verstage-$(CONFIG_DRIVERS_UART) += uart.c +verstage-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ romstage-y += cbmem.c @@ -32,6 +34,7 @@ romstage-y += clock.c romstage-y += qcom_qup_se.c romstage-$(CONFIG_DRIVERS_UART) += uart.c +romstage-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ ramstage-y += soc.c @@ -44,6 +47,7 @@ ramstage-y += qupv3_config.c ramstage-y += qcom_qup_se.c ramstage-$(CONFIG_DRIVERS_UART) += uart.c +ramstage-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ diff --git a/src/soc/qualcomm/sc7180/bootblock.c b/src/soc/qualcomm/sc7180/bootblock.c index b0cd9f2..8ee04d2 100644 --- a/src/soc/qualcomm/sc7180/bootblock.c +++ b/src/soc/qualcomm/sc7180/bootblock.c @@ -18,10 +18,12 @@ #include <soc/mmu.h> #include <soc/clock.h> #include <soc/qupv3_fw_config.h> +#include <soc/qspi.h> void bootblock_soc_init(void) { sc7180_mmu_init(); clock_init(); + quadspi_init(25 * MHz); qupv3_fw_init(); } diff --git a/src/soc/qualcomm/sc7180/include/soc/qspi.h b/src/soc/qualcomm/sc7180/include/soc/qspi.h new file mode 100644 index 0000000..c3d1f78 --- /dev/null +++ b/src/soc/qualcomm/sc7180/include/soc/qspi.h @@ -0,0 +1,121 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2019 Qualcomm Technologies. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <types.h> +#include <soc/addressmap.h> +#include <spi-generic.h> + +#ifndef __SOC_QUALCOMM_SC7180_QSPI_H__ +#define __SOC_QUALCOMM_SC7180_QSPI_H__ + +struct sc7180_qspi_regs { + u32 mstr_cfg; + u32 ahb_mstr_cfg; + u32 reserve_0; + u32 mstr_int_en; + u32 mstr_int_sts; + u32 pio_xfer_ctrl; + u32 pio_xfer_cfg; + u32 pio_xfer_sts; + u32 pio_dataout_1byte; + u32 pio_dataout_4byte; + u32 rd_fifo_cfg; + u32 rd_fifo_sts; + u32 rd_fifo_rst; + u32 reserve_1[3]; + u32 next_dma_desc_addr; + u32 current_dma_desc_addr; + u32 current_mem_addr; + u32 hw_version; + u32 rd_fifo[16]; +}; + +check_member(sc7180_qspi_regs, rd_fifo, 0x50); +static struct sc7180_qspi_regs * const sc7180_qspi = (void *) QSPI_BASE; + +// MSTR_CONFIG register + +#define TX_DATA_OE_DELAY_SHIFT 24 +#define TX_DATA_OE_DELAY_MASK (0x3 << TX_DATA_OE_DELAY_SHIFT) +#define TX_CS_N_DELAY_SHIFT 22 +#define TX_CS_N_DELAY_MASK (0x3 << TX_CS_N_DELAY_SHIFT) +#define TX_CLK_DELAY_SHIFT 20 +#define TX_CLK_DELAY_MASK (0x3 << TX_CLK_DELAY_SHIFT) +#define TX_DATA_DELAY_SHIFT 18 +#define TX_DATA_DELAY_MASK (0x3 << TX_DATA_DELAY_SHIFT) +#define LPA_BASE_SHIFT 14 +#define LPA_BASE_MASK (0xF << LPA_BASE_SHIFT) +#define SBL_EN BIT(13) +#define CHIP_SELECT_NUM BIT(12) +#define SPI_MODE_SHIFT 10 +#define SPI_MODE_MASK (0x3 << SPI_MODE_SHIFT) +#define BIG_ENDIAN_MODE BIT(9) +#define DMA_ENABLE BIT(8) +#define PIN_WPN BIT(7) +#define PIN_HOLDN BIT(6) +#define FB_CLK_EN BIT(4) +#define FULL_CYCLE_MODE BIT(3) + +// MSTR_INT_ENABLE and MSTR_INT_STATUS register + +#define DMA_CHAIN_DONE BIT(31) +#define TRANSACTION_DONE BIT(16) +#define WRITE_FIFO_OVERRUN BIT(11) +#define WRITE_FIFO_FULL BIT(10) +#define HRESP_FROM_NOC_ERR BIT(3) +#define RESP_FIFO_RDY BIT(2) +#define RESP_FIFO_NOT_EMPTY BIT(1) +#define RESP_FIFO_UNDERRUN BIT(0) + +// PIO_TRANSFER_CONFIG register + +#define TRANSFER_FRAGMENT BIT(8) +#define MULTI_IO_MODE_SHIFT 1 +#define MULTI_IO_MODE_MASK (0x7 << MULTI_IO_MODE_SHIFT) +#define TRANSFER_DIRECTION BIT(0) + +// PIO_TRANSFER_STATUS register + +#define WR_FIFO_BYTES_SHIFT 16 +#define WR_FIFO_BYTES_MASK (0xFFFF << WR_FIFO_BYTES_SHIFT) + +// RD_FIFO_CONFIG register + +#define CONTINUOUS_MODE BIT(0) + +// RD_FIFO_STATUS register + +#define FIFO_EMPTY BIT(11) +#define WR_CNTS_SHIFT 4 +#define WR_CNTS_MASK (0x7F << WR_CNTS_SHIFT) +#define RDY_64BYTE BIT(3) +#define RDY_32BYTE BIT(2) +#define RDY_16BYTE BIT(1) +#define FIFO_RDY BIT(0) + +// RD_FIFO_RESET register + +#define RESET_FIFO BIT(0) + +#define QSPI_MAX_PACKET_COUNT 0xFFC0 + +void quadspi_init(uint32_t hz); +int sc7180_claim_bus(const struct spi_slave *slave); +int sc7180_setup_bus(const struct spi_slave *slave); +void sc7180_release_bus(const struct spi_slave *slave); +int sc7180_xfer(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes); +int sc7180_xfer_dual(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes); +#endif /* __SOC_QUALCOMM_SC7180_QSPI_H__ */ diff --git a/src/soc/qualcomm/sc7180/qspi.c b/src/soc/qualcomm/sc7180/qspi.c new file mode 100644 index 0000000..c589415 --- /dev/null +++ b/src/soc/qualcomm/sc7180/qspi.c @@ -0,0 +1,306 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <spi-generic.h> +#include <spi_flash.h> +#include <arch/cache.h> +#include <device/mmio.h> +#include <soc/addressmap.h> +#include <soc/qspi.h> +#include <soc/gpio.h> +#include <soc/clock.h> +#include <symbols.h> +#include <assert.h> +#include <gpio.h> +#include <string.h> + +#define CACHE_LINE_SIZE 64 + +static int curr_desc_idx = -1; + +struct cmd_desc { + uint32_t data_address; + uint32_t next_descriptor; + uint32_t direction:1; + uint32_t multi_io_mode:3; + uint32_t reserved1:4; + uint32_t fragment:1; + uint32_t reserved2:7; + uint32_t length:16; + //------------------------// + uint32_t bounce_src; + uint32_t bounce_dst; + uint32_t bounce_length; + uint64_t padding[5]; +}; + +enum qspi_mode { + SDR_1BIT = 1, + SDR_2BIT = 2, + SDR_4BIT = 3, + DDR_1BIT = 5, + DDR_2BIT = 6, + DDR_4BIT = 7, +}; + +enum cs_state { + CS_DEASSERT, + CS_ASSERT +}; + +struct xfer_cfg { + enum qspi_mode mode; +}; + +enum bus_xfer_direction { + MASTER_READ = 0, + MASTER_WRITE = 1, +}; + +struct { + struct cmd_desc descriptors[3]; + uint8_t buffers[3][CACHE_LINE_SIZE]; +} *dma = (void *)_dma_coherent; + +static void dma_transfer_chain(struct cmd_desc *chain) +{ + uint32_t mstr_int_status; + + write32(&sc7180_qspi->mstr_int_sts, 0xFFFFFFFF); + write32(&sc7180_qspi->next_dma_desc_addr, (uint32_t)(uintptr_t) chain); + + while (1) { + mstr_int_status = read32(&sc7180_qspi->mstr_int_sts); + if (mstr_int_status & DMA_CHAIN_DONE) + break; + } +} + +static void flush_chain(void) +{ + struct cmd_desc *desc = &dma->descriptors[0]; + uint8_t *src; + uint8_t *dst; + + dma_transfer_chain(desc); + + while (desc) { + if (desc->direction == MASTER_READ) { + if (desc->bounce_length == 0) + dcache_invalidate_by_mva( + (void *)(uintptr_t) desc->data_address, + desc->length); + else { + src = (void *)(uintptr_t) desc->bounce_src; + dst = (void *)(uintptr_t) desc->bounce_dst; + memcpy(dst, src, desc->bounce_length); + } + } + desc = (void *)(uintptr_t) desc->next_descriptor; + } + curr_desc_idx = -1; +} + +static struct cmd_desc *allocate_descriptor(void) +{ + struct cmd_desc *current; + struct cmd_desc *next; + uint8_t index; + + current = (curr_desc_idx == -1) ? + NULL : &dma->descriptors[curr_desc_idx]; + + index = ++curr_desc_idx; + next = &dma->descriptors[index]; + + next->data_address = (uint32_t) (uintptr_t) dma->buffers[index]; + + next->next_descriptor = 0; + next->direction = MASTER_READ; + next->multi_io_mode = 0; + next->reserved1 = 0; + next->fragment = 0; + next->reserved2 = 0; + next->length = 0; + next->bounce_src = 0; + next->bounce_dst = 0; + next->bounce_length = 0; + + if (current) { + current->next_descriptor = (uint32_t)(uintptr_t) next; + current->fragment = 1; + } + + return next; +} + +static void cs_change(enum cs_state state) +{ + gpio_set(GPIO(68), state == CS_DEASSERT); +} + +static void configure_gpios(void) +{ + gpio_output(GPIO(68), 1); + + gpio_configure(GPIO(64), GPIO64_FUNC_QSPI_DATA_0, + GPIO_NO_PULL, GPIO_2MA, GPIO_ENABLE); + + gpio_configure(GPIO(65), GPIO65_FUNC_QSPI_DATA_1, + GPIO_NO_PULL, GPIO_2MA, GPIO_ENABLE); + + gpio_configure(GPIO(63), GPIO63_FUNC_QSPI_CLK, + GPIO_NO_PULL, GPIO_2MA, GPIO_ENABLE); +} + +static void queue_bounce_data(uint8_t *data, uint32_t data_bytes, + enum qspi_mode data_mode, bool write) +{ + struct cmd_desc *desc; + uint8_t *ptr; + + desc = allocate_descriptor(); + desc->direction = write; + desc->multi_io_mode = data_mode; + ptr = (void *)(uintptr_t) desc->data_address; + + if (write) { + memcpy(ptr, data, data_bytes); + } else { + desc->bounce_src = (uint32_t)(uintptr_t) ptr; + desc->bounce_dst = (uint32_t)(uintptr_t) data; + desc->bounce_length = data_bytes; + } + + desc->length = data_bytes; +} + +static void queue_direct_data(uint8_t *data, uint32_t data_bytes, + enum qspi_mode data_mode, bool write) +{ + struct cmd_desc *desc; + + desc = allocate_descriptor(); + desc->direction = write; + desc->multi_io_mode = data_mode; + desc->data_address = (uint32_t)(uintptr_t) data; + desc->length = data_bytes; + + if (write) + dcache_clean_by_mva(data, data_bytes); + else + dcache_invalidate_by_mva(data, data_bytes); +} + +static void queue_data(uint8_t *data, uint32_t data_bytes, + enum qspi_mode data_mode, bool write) +{ + uint8_t *aligned_ptr; + uint8_t *epilog_ptr; + uint32_t prolog_bytes, aligned_bytes, epilog_bytes; + + if (data_bytes == 0) + return; + + aligned_ptr = + (uint8_t *)ALIGN_UP((uintptr_t)data, CACHE_LINE_SIZE); + + prolog_bytes = MIN(data_bytes, aligned_ptr - data); + aligned_bytes = ALIGN_DOWN(data_bytes - prolog_bytes, CACHE_LINE_SIZE); + epilog_bytes = data_bytes - prolog_bytes - aligned_bytes; + + epilog_ptr = data + prolog_bytes + aligned_bytes; + + if (prolog_bytes) + queue_bounce_data(data, prolog_bytes, data_mode, write); + if (aligned_bytes) + queue_direct_data(aligned_ptr, aligned_bytes, data_mode, write); + if (epilog_bytes) + queue_bounce_data(epilog_ptr, epilog_bytes, data_mode, write); +} + +static void reg_init(void) +{ + uint32_t spi_mode; + uint32_t tx_data_oe_delay, tx_data_delay; + uint32_t mstr_config; + + spi_mode = 0; + + tx_data_oe_delay = 0; + tx_data_delay = 0; + + mstr_config = (tx_data_oe_delay << TX_DATA_OE_DELAY_SHIFT) | + (tx_data_delay << TX_DATA_DELAY_SHIFT) | (SBL_EN) | + (spi_mode << SPI_MODE_SHIFT) | + (PIN_HOLDN) | + (FB_CLK_EN) | + (DMA_ENABLE) | + (FULL_CYCLE_MODE); + + write32(&sc7180_qspi->mstr_cfg, mstr_config); + write32(&sc7180_qspi->ahb_mstr_cfg, 0xA42); + write32(&sc7180_qspi->mstr_int_en, 0x0); + write32(&sc7180_qspi->mstr_int_sts, 0xFFFFFFFF); + write32(&sc7180_qspi->rd_fifo_cfg, 0x0); + write32(&sc7180_qspi->rd_fifo_rst, RESET_FIFO); +} + +void quadspi_init(uint32_t hz) +{ + assert(dcache_line_bytes() == CACHE_LINE_SIZE); + clock_configure_qspi(hz * 4); + configure_gpios(); + reg_init(); +} + +int sc7180_claim_bus(const struct spi_slave *slave) +{ + cs_change(CS_ASSERT); + return 0; +} + +void sc7180_release_bus(const struct spi_slave *slave) +{ + cs_change(CS_DEASSERT); +} + +static int xfer(enum qspi_mode mode, const void *dout, size_t out_bytes, + void *din, size_t in_bytes) +{ + if ((out_bytes && !dout) || (in_bytes && !din) || + (in_bytes && out_bytes)) { + return -1; + } + + queue_data((uint8_t *) (out_bytes ? dout : din), + in_bytes | out_bytes, mode, !!out_bytes); + + flush_chain(); + + return 0; +} + +int sc7180_xfer(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes) +{ + return xfer(SDR_1BIT, dout, out_bytes, din, in_bytes); +} + +int sc7180_xfer_dual(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes) +{ + return xfer(SDR_2BIT, dout, out_bytes, din, in_bytes); +} diff --git a/src/soc/qualcomm/sc7180/spi.c b/src/soc/qualcomm/sc7180/spi.c index 5abb81a..c6d4cb1 100644 --- a/src/soc/qualcomm/sc7180/spi.c +++ b/src/soc/qualcomm/sc7180/spi.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2018, The Linux Foundation. All rights reserved. + * Copyright (C) 2019, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -15,12 +15,19 @@ #include <spi-generic.h> #include <spi_flash.h> +#include <soc/qspi.h> -static const struct spi_ctrlr spi_ctrlr; +static const struct spi_ctrlr qspi_ctrlr = { + .claim_bus = sc7180_claim_bus, + .release_bus = sc7180_release_bus, + .xfer = sc7180_xfer, + .xfer_dual = sc7180_xfer_dual, + .max_xfer_size = QSPI_MAX_PACKET_COUNT, +}; const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = { { - .ctrlr = &spi_ctrlr, + .ctrlr = &qspi_ctrlr, .bus_start = CONFIG_BOOT_DEVICE_SPI_FLASH_BUS, .bus_end = CONFIG_BOOT_DEVICE_SPI_FLASH_BUS, }, -- To view, visit https://review.coreboot.org/c/coreboot/+/35501 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I2eb8cf90aa4559541ba293b3fd2870896bed20b7 Gerrit-Change-Number: 35501 Gerrit-PatchSet: 1 Gerrit-Owner: mturney mturney <mturney(a)codeaurora.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: mturney mturney <mturney(a)codeaurora.org> Gerrit-MessageType: newchange

3 12

Change in coreboot[master]: Remove the non-working bayou payload; clean up payloads
by ron minnich (Code Review) 05 Dec '19

05 Dec '19

ron minnich has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37424 ) Change subject: Remove the non-working bayou payload; clean up payloads ...................................................................... Remove the non-working bayou payload; clean up payloads payloads is unmaintained. There are coding issues, there are things that don't build correctly, payloads/Kconfig references not existing Kconfig files. I need payloads to work better, so I'm nominating myself as maintainer if no one objects. Part of this bit rot is because we don't even seem to include building payloads in our current CI; can this be done? There is more pruning to come. If a payload is so unloved nobody has looked at it in years, much less used it, it is time for it to go. Bayou was a wonderful idea, and I'm sad to see it go, but ... oh well. Change-Id: I37ea69c94c7fa721a6ccfb92e4b3e993627599f6 Signed-off-by: Ronald G. Minnich <rminnich(a)gmail.com> --- M 3rdparty/fsp M Documentation/cbfs.txt M MAINTAINERS M payloads/Kconfig D payloads/bayou/Doxyfile D payloads/bayou/Makefile D payloads/bayou/bayou.h D payloads/bayou/bayou.ldscript D payloads/bayou/bayou.xml.example D payloads/bayou/config.c D payloads/bayou/lzma.c D payloads/bayou/lzmadecode.c D payloads/bayou/lzmadecode.h D payloads/bayou/main.c D payloads/bayou/menu.c D payloads/bayou/nrv2b.c D payloads/bayou/payload.c D payloads/bayou/self.c D payloads/bayou/self.h 19 files changed, 4 insertions(+), 3,187 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/37424/1 diff --git a/3rdparty/fsp b/3rdparty/fsp index 5996417..1d2b7e1 160000 --- a/3rdparty/fsp +++ b/3rdparty/fsp @@ -1 +1 @@ -Subproject commit 59964173e18950debcc6b8856c5c928935ce0b4f +Subproject commit 1d2b7e1a94c6a7c25a6fed1ac37caebf500f5f1a diff --git a/Documentation/cbfs.txt b/Documentation/cbfs.txt index 831e882..c11b25a 100644 --- a/Documentation/cbfs.txt +++ b/Documentation/cbfs.txt @@ -31,7 +31,7 @@ Each "file" (or component, as I style them) now has a type associated with it. The type is used by coreboot to identify the type of file that it is loading, and it can also be used by payloads to group items in the -CBFS by type (i.e - bayou can ask for all components that are payloads). +CBFS by type (i.e - code can ask for all components that are payloads). The header on each "file" (or component, as I like to style them) has been simplified - We now only store the length, the type, the checksum, @@ -339,7 +339,7 @@ Stages are assigned a component value of 0x20. When coreboot sees this component type, it knows that it should pass the data to a sub-function that will process the payload. Furthermore, other run time -applications such as 'bayou' may easily index all available payloads +applications may easily index all available payloads on the system by searching for the payload type. diff --git a/MAINTAINERS b/MAINTAINERS index d4b1935..38b5f72 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -493,11 +493,9 @@ F: payloads/nvramcui/ LIBPAYLOAD +M: Ronald Minnich <rminnich(a)coreboot.org> F: payloads/libpayload/ -BAYOU PAYLOAD -F: payloads/bayou/ - COREINFO PAYLOAD F: payloads/coreinfo/ diff --git a/payloads/Kconfig b/payloads/Kconfig index 46cfaf5..4e86c21 100644 --- a/payloads/Kconfig +++ b/payloads/Kconfig @@ -40,21 +40,12 @@ You will be able to specify the location and file name of the payload image later. -config PAYLOAD_BAYOU - bool "Bayou" - depends on ARCH_X86 - help - Select this option if you want to set bayou as your primary - payload. - source "payloads/external/*/Kconfig.name" endchoice source "payloads/external/*/Kconfig" -source "payloads/bayou/Kconfig" - config PAYLOAD_FILE string "Payload path and filename" depends on PAYLOAD_ELF || PAYLOAD_FIT diff --git a/payloads/bayou/Doxyfile b/payloads/bayou/Doxyfile deleted file mode 100644 index acab01c..0000000 --- a/payloads/bayou/Doxyfile +++ /dev/null @@ -1,1635 +0,0 @@ -# Doxyfile 1.7.1 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See -# http://www.gnu.org/software/libiconv for the list of possible encodings. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - -PROJECT_NAME = bayou - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = doxygen - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - -CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, -# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = YES - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = YES - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments -# (thus requiring an explicit @brief command for a brief description.) - -JAVADOC_AUTOBRIEF = YES - -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified -# scopes will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for -# Fortran. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for -# VHDL. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public -# instead of private inheritance when no explicit protection keyword is present. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen to replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - -SUBGROUPING = YES - -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. - -TYPEDEF_HIDES_STRUCT = NO - -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penality. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will rougly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols - -SYMBOL_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = YES - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default -# anonymous namespace are hidden. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - -CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = YES - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen -# will list include files with double quotes in the documentation -# rather than with sharp brackets. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen -# will sort the (brief and detailed) documentation of class members so that -# constructors and destructors are listed first. If set to NO (the default) -# the constructors will appear in the respective orders defined by -# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. -# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO -# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) -# the group names will appear in their defined order. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - -SORT_BY_SCOPE_NAME = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the -# Folder Tree View (if specified). The default is YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. -# This will remove the Namespaces entry from the Quick Index -# and from the Folder Tree View (if specified). The default is YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command <command> <input-file>, where <command> is the value of -# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file -# provided by doxygen. Whatever the program writes to standard output -# is used as the file version. See the manual for examples. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. -# You can optionally specify a file name after the option, if omitted -# DoxygenLayout.xml will be used as the name of the layout file. - -LAYOUT_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be abled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - -WARN_NO_PARAMDOC = YES - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = . - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for -# the list of possible encodings. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 - -FILE_PATTERNS = - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = YES - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - -EXCLUDE = util/kconfig - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded -# from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories -# for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test - -EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command <filter> <input-file>, where <filter> -# is the value of the INPUT_FILTER tag, and <input-file> is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. -# Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. -# The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER -# is applied to all files. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - -FILTER_SOURCE_FILES = NO - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - -SOURCE_BROWSER = YES - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - -STRIP_CODE_COMMENTS = NO - -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = YES - -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. -# Otherwise they will link to the documentation. - -REFERENCES_LINK_SOURCE = YES - -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You -# will need version 4.8.6 or higher. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = YES - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = YES - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# If the HTML_FOOTER_DESCRIPTION tag is set to YES, Doxygen will -# add generated date, project name and doxygen version to HTML footer. - -HTML_FOOTER_DESCRIPTION= YES - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! - -HTML_STYLESHEET = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. -# Doxygen will adjust the colors in the stylesheet and background images -# according to this color. Hue is specified as an angle on a colorwheel, -# see http://en.wikipedia.org/wiki/Hue for more information. -# For instance the value 0 represents red, 60 is yellow, 120 is green, -# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. -# The allowed range is 0 to 359. - -HTML_COLORSTYLE_HUE = 220 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of -# the colors in the HTML output. For a value of 0 the output will use -# grayscales only. A value of 255 will produce the most vivid colors. - -HTML_COLORSTYLE_SAT = 100 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to -# the luminance component of the colors in the HTML output. Values below -# 100 gradually make the output lighter, whereas values above 100 make -# the output darker. The value divided by 100 is the actual gamma applied, -# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, -# and 100 does not change the gamma. - -HTML_COLORSTYLE_GAMMA = 80 - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting -# this to NO can help when comparing the output of multiple runs. - -HTML_TIMESTAMP = NO - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). - -HTML_DYNAMIC_SECTIONS = YES - -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. - -GENERATE_DOCSET = NO - -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) -# can be grouped. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen -# will append .docset to the name. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. - -DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. - -DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file -# content. - -CHM_INDEX_ENCODING = - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - -TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated -# that can be used as input for Qt's qhelpgenerator to generate a -# Qt Compressed Help (.qch) of the generated HTML documentation. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. -# The path specified is relative to the HTML output folder. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#namespace - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#virtual-folders - -QHP_VIRTUAL_FOLDER = doc - -# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to -# add. For more information please see -# http://doc.trolltech.com/qthelpproject.html#custom-filters - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see -# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> -# Qt Help Project / Custom Filters</a>. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's -# filter section matches. -# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> -# Qt Help Project / Filter Attributes</a>. - -QHP_SECT_FILTER_ATTRS = - -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated -# .qhp file. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files -# will be generated, which together with the HTML files, form an Eclipse help -# plugin. To install this plugin and make it available under the help contents -# menu in Eclipse, the contents of the directory containing the HTML and XML -# files needs to be copied into the plugins directory of eclipse. The name of -# the directory within the plugins directory should be the same as -# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before -# the help appears. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have -# this name. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - -DISABLE_INDEX = NO - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - -ENUM_VALUES_PER_LINE = 4 - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to YES, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). -# Windows users are probably better off using the HTML help feature. - -GENERATE_TREEVIEW = YES - -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open -# links to external symbols imported via tag files in a separate window. - -EXT_LINKS_IN_WINDOW = NO - -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory -# to force them to be regenerated. - -FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are -# not supported properly for IE 6.0, but are supported on all modern browsers. -# Note that when changing this option you need to delete any form_*.png files -# in the HTML output before the changes have effect. - -FORMULA_TRANSPARENT = YES - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box -# for the HTML output. The underlying search engine uses javascript -# and DHTML and should work on any modern browser. Note that when using -# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets -# (GENERATE_DOCSET) there is already a search function so this one should -# typically be disabled. For large projects the javascript based search engine -# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. - -SEARCHENGINE = YES - -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a PHP enabled web server instead of at the web client -# using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server -# based approach is that it scales better to large projects and allows -# full text search. The disadvances is that it is more difficult to setup -# and does not have live searching capabilities. - -SERVER_BASED_SEARCH = NO - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the -# Makefile that is written to the output directory. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = NO - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = NO - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - -LATEX_HIDE_INDICES = NO - -# If LATEX_SOURCE_CODE is set to YES then doxygen will include -# source code with syntax highlighting in the LaTeX output. -# Note that which sources are shown also depends on other settings -# such as SOURCE_BROWSER. - -LATEX_SOURCE_CODE = NO - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - -XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - -XML_PROGRAMLISTING = YES - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. -# This is useful -# if you want to understand what is going on. -# On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_DEFINED tags. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - -PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse -# the parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option is superseded by the HAVE_DOT option below. This is only a -# fallback. It is recommended to install and use dot, since it yields more -# powerful graphs. - -CLASS_DIAGRAMS = YES - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = NO - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = YES - -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is -# allowed to run in parallel. When set to 0 (the default) doxygen will -# base this on the number of processors available in the system. You can set it -# explicitly to a value larger than 0 to get control over the balance -# between CPU load and processing speed. - -DOT_NUM_THREADS = 0 - -# By default doxygen will write a font called FreeSans.ttf to the output -# directory and reference it in all dot files that doxygen generates. This -# font does not include all possible unicode characters however, so when you need -# these (or just want a differently looking font) you can specify the font name -# using DOT_FONTNAME. You need need to make sure dot is able to find the font, -# which can be done by putting it in a standard location or by setting the -# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory -# containing the font. - -DOT_FONTNAME = FreeSans - -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. -# The default size is 10pt. - -DOT_FONTSIZE = 10 - -# By default doxygen will tell dot to use the output directory to look for the -# FreeSans.ttf font (which doxygen will put there itself). If you specify a -# different font using DOT_FONTNAME you can set the path where dot -# can find it using this tag. - -DOT_FONTPATH = - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = YES - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - -GROUP_GRAPHS = YES - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - -UML_LOOK = YES - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs -# for selected functions only using the \callgraph command. - -CALL_GRAPH = YES - -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller -# graphs for selected functions only using the \callergraph command. - -CALLER_GRAPH = YES - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = YES - -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - -DIRECTORY_GRAPH = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - -DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note -# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. - -DOT_GRAPH_MAX_NODES = 50 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. - -MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of -# a graph (i.e. they become hard to read). - -DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - -DOT_MULTI_TARGETS = YES - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES diff --git a/payloads/bayou/Makefile b/payloads/bayou/Makefile deleted file mode 100644 index 7a4b08b..0000000 --- a/payloads/bayou/Makefile +++ /dev/null @@ -1,67 +0,0 @@ -## -## This file is part of the bayou project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License version 2 as -## published by the Free Software Foundation. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -CONFIG_LZMA=y -CONFIG_NRV2B=y -CONFIG_BUILTIN_LAR=y - -PBUILDER_CONFIG=bayou.xml -BUILTIN_LAR=builtin.lar - -export src := $(CURDIR) -export obj := $(src)/build - -LIBPAYLOAD_DIR := $(obj)/libpayload - -CC?=gcc -STRIP?=strip -OBJCOPY?=objcopy - -FFLAGS-y= -FFLAGS-$(CONFIG_BUILTIN_LAR) += -DCONFIG_BUILTIN_LAR -FFLAGS-$(CONFIG_LZMA) += -DCONFIG_LZMA -FFLAGS-$(CONFIG_NRV2B) += -DCONFIG_NRV2B - -OBJECTS-y=main.o payload.o config.o menu.o self.o -OBJECTS-$(CONFIG_LZMA) += lzma.o -OBJECTS-$(CONFIG_NRV2B) += nrv2b.o -OBJECTS-$(CONFIG_BUILTIN_LAR) += builtin-lar.o - -CFLAGS= -Wall -Werror -Os $(FFLAGS-y) -LDFLAGS=-Wl,-T,bayou.ldscript -static -LIBGCC=$(shell $(CC) -m32 -print-libgcc-file-name) - -LPCC=$(LIBPAYLOAD_DIR)/bin/lpgcc - -bayou.elf: $(OBJECTS-y) - $(LPCC) $(LDFLAGS) -m32 -o $@ $(OBJECTS-y) - @$(STRIP) $@ - -builtin-lar.o: $(BUILTIN_LAR) - @$(OBJCOPY) -I binary -B i386 -O elf32-i386 $(BUILTIN_LAR) $@ - -builtin.lar: util/pbuilder/pbuilder - @rm -f $@ - util/pbuilder/pbuilder -c $(PBUILDER_CONFIG) create $@ - -util/pbuilder/pbuilder: - $(MAKE) -C util/pbuilder - -%.o: %.c - $(LPCC) $(CFLAGS) -c -o $@ $< - -clean: - rm -f *.o bayou.elf builtin.lar - $(MAKE) -C util/pbuilder clean diff --git a/payloads/bayou/bayou.h b/payloads/bayou/bayou.h deleted file mode 100644 index 6bf10a5..0000000 --- a/payloads/bayou/bayou.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef BAYOU_H_ -#define BAYOU_H_ - -#include <libpayload.h> - -#define BAYOU_MAX_ENTRIES 10 - -struct bpt_config { - u32 id; - u8 timeout; - u8 entries; - u8 padding[10]; -}; - -struct bpt_pentry { - u8 index; - u8 parent; - u8 type; - u8 flags; - u8 title[64]; - u8 nlen; -}; - -#define BPT_ID 0x30545042 -#define BPT_TYPE_CHOOSER 0x01 -#define BPT_TYPE_CHAIN 0x02 -#define BPT_TYPE_SUBCHAIN 0x03 - -#define BPT_FLAG_DEFAULT 0x01 -#define BPT_FLAG_NOSHOW 0x02 - -enum bayou_params { - BAYOU_PARAM_NAME = 0, - BAYOU_PARAM_LIST, - BAYOU_PARAM_DESC, - BAYOU_PARAMS_COUNT -}; - -struct payload { - struct bpt_pentry pentry; - struct larstat stat; - u8 *fptr; - char *params[BAYOU_PARAMS_COUNT]; -}; - -struct bayoucfg { - u8 timeout; - int n_entries; - struct payload entries[BAYOU_MAX_ENTRIES]; -}; - -extern struct bayoucfg bayoucfg; - -int verify_self(u8 *ptr); -int self_get_params(u8 *fptr, u8 **params); -int self_load_and_run(struct payload *p, int *ret); - -void menu(void); - -void run_payload(struct payload *p); -char *payload_get_name(struct payload *p); -struct payload *payload_get_default(void); -void run_payload_timeout(struct payload *p, int timeout); -void payload_parse_params(struct payload *pload, u8 *params, int len); - -int get_configuration(struct LAR *lar); - -#endif diff --git a/payloads/bayou/bayou.ldscript b/payloads/bayou/bayou.ldscript deleted file mode 100644 index 86baaec..0000000 --- a/payloads/bayou/bayou.ldscript +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -BASE_ADDRESS = 0x19000; - -OUTPUT_FORMAT(elf32-i386) -OUTPUT_ARCH(i386) - -ENTRY(_entry) - -HEAP_SIZE = 16384; -STACK_SIZE = 16384; - -SECTIONS -{ - . = BASE_ADDRESS; - - . = ALIGN(16); - _start = .; - - .text : { - *(.text._entry) - *(.text) - *(.text.*) - } - - .rodata : { - *(.rodata) - *(.rodata.*) - } - - .data : { - *(.data) - *(.data.*) - } - - _edata = .; - - .bss : { - *(.bss) - *(.bss.*) - *(COMMON) - - /* Stack and heap */ - - . = ALIGN(16); - _heap = .; - . += HEAP_SIZE; - . = ALIGN(16); - _eheap = .; - - _estack = .; - . += STACK_SIZE; - . = ALIGN(16); - _stack = .; - } - - _end = .; - - /DISCARD/ : { *(.comment) *(.note) *(.note.*) } -} diff --git a/payloads/bayou/bayou.xml.example b/payloads/bayou/bayou.xml.example deleted file mode 100644 index c52eaf2..0000000 --- a/payloads/bayou/bayou.xml.example +++ /dev/null @@ -1,37 +0,0 @@ - - - - -<BayouConfig> - <global> - <timeout>10</timeout> - </global> - <payloads> - <payload type="chain" flags="default"> - <title>Default Chain</title> - <chain> - <file>payloads/passwd.elf</file> - <lar>passwd</lar> - </chain> - <chain> - <file>payloads/coreinfo.elf</file> - </chain> - </payload> - <payload type="chooser"> - <file>payloads/coreinfo.elf</file> - </payload> - </payloads> -</BayouConfig> diff --git a/payloads/bayou/config.c b/payloads/bayou/config.c deleted file mode 100644 index ad315c8..0000000 --- a/payloads/bayou/config.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" - -struct bayoucfg bayoucfg; - -static int add_payload(struct LAR *lar, struct larent *larent) -{ - struct payload *payload; - int plen; - u8 *params = NULL; - u8 *fptr; - - if (bayoucfg.n_entries == BAYOU_MAX_ENTRIES) - return -1; - - payload = &bayoucfg.entries[bayoucfg.n_entries]; - - if (strncmp((char *)larent->name, "payload/", 8)) - return -1; - - if (larstat(lar, (const char *)larent->name, &payload->stat)) - return -1; - - /* Make sure the LAR entry is valid. */ - if (!lfverify(lar, (const char *)larent->name)) - return -1; - - /* Get a pointer to the start of the file. */ - fptr = larfptr(lar, (const char *)larent->name); - - if (fptr == NULL) - return -1; - - if (!verify_self(fptr)) - return -1; - - payload->pentry.index = bayoucfg.n_entries; - payload->pentry.parent = 0; - payload->pentry.type = BPT_TYPE_CHOOSER; - payload->pentry.flags = 0; - - plen = self_get_params(fptr, &params); - payload_parse_params(payload, params, plen); - - payload->fptr = fptr; - - bayoucfg.n_entries++; - - return 0; -} - -static int lar_walk_files(struct LAR *lar, - int (*cb) (struct LAR *, struct larent *)) -{ - struct larent *larent; - int ret = 0; - - rewindlar(lar); - - while ((larent = readlar(lar)) != NULL) { - if ((ret = cb(lar, larent))) - break; - } - - return ret; -} - -/** - * If reading the bayou_payload_table fails for some reason, then construct - * a dummy table. All valid payloads in the lar are added as chooser items. - */ -static void build_dummy_table(struct LAR *lar) -{ - bayoucfg.timeout = 0xFF; - bayoucfg.n_entries = 0; - - lar_walk_files(lar, add_payload); -} - -int get_configuration(struct LAR *lar) -{ - struct larstat stat; - struct bpt_config *bptcfg; - u8 *fptr, *ptr; - int i; - - /* - * If bayou_payload_table doesn't exist, then dummy up - * a table from the LAR contents. - */ - if (larstat(lar, "bayou_payload_table", &stat) || - !lfverify(lar, "bayou_payload_table")) - build_dummy_table(lar); - - /* Open up the BPT and get the creamy goodness within. */ - - fptr = larfptr(lar, "bayou_payload_table"); - - if (fptr == NULL) - build_dummy_table(lar); - - bptcfg = (struct bpt_config *)fptr; - bayoucfg.timeout = bptcfg->timeout; - - bayoucfg.n_entries = bptcfg->entries; - - if (bayoucfg.n_entries > BAYOU_MAX_ENTRIES) { - printf("W: Limiting the number of entries to %d\n", - BAYOU_MAX_ENTRIES); - bayoucfg.n_entries = BAYOU_MAX_ENTRIES; - } - - ptr = fptr + sizeof(struct bpt_config); - - for (i = 0; i < bayoucfg.n_entries; i++) { - struct bpt_pentry *entry = (struct bpt_pentry *)ptr; - struct payload *p = &(bayoucfg.entries[i]); - int plen; - u8 *params = NULL; - - memcpy(&p->pentry, entry, sizeof(struct bpt_pentry)); - - if (entry->type != BPT_TYPE_CHAIN) { - char *lname = (char *)ptr + sizeof(struct bpt_pentry); - - if (larstat(lar, (const char *)lname, &p->stat)) - build_dummy_table(lar); - - if (!lfverify(lar, (const char *)lname)) - build_dummy_table(lar); - - fptr = larfptr(lar, (const char *)lname); - - if (verify_self(fptr)) - p->fptr = fptr; - else - build_dummy_table(lar); - - plen = self_get_params(fptr, &params); - payload_parse_params(p, params, plen); - } - - ptr += sizeof(struct bpt_pentry) + entry->nlen; - } - - return 0; -} diff --git a/payloads/bayou/lzma.c b/payloads/bayou/lzma.c deleted file mode 100644 index 14bd921..0000000 --- a/payloads/bayou/lzma.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - -coreboot interface to memory-saving variant of LZMA decoder - -(C)opyright 2006 Carl-Daniel Hailfinger -Released under the GNU GPL v2 or later - -Parts of this file are based on C/7zip/Compress/LZMA_C/LzmaTest.c from the LZMA -SDK 4.42, which is written and distributed to public domain by Igor Pavlov. - -*/ - -#include <libpayload.h> -#include "lzmadecode.c" - -unsigned long ulzma(u8 *src, u8 *dst) -{ - unsigned char properties[LZMA_PROPERTIES_SIZE]; - UInt32 outSize; - SizeT inProcessed; - SizeT outProcessed; - int res; - CLzmaDecoderState state; - SizeT mallocneeds; - unsigned char scratchpad[15980]; - - memcpy(properties, src, LZMA_PROPERTIES_SIZE); - outSize = *(UInt32 *)(src + LZMA_PROPERTIES_SIZE); - if (LzmaDecodeProperties(&state.Properties, properties, LZMA_PROPERTIES_SIZE) != LZMA_RESULT_OK) { - printf("Incorrect stream properties\n"); - } - mallocneeds = (LzmaGetNumProbs(&state.Properties) * sizeof(CProb)); - if (mallocneeds > 15980) { - printf("Decoder scratchpad too small!\n"); - } - state.Probs = (CProb *)scratchpad; - res = LzmaDecode(&state, src + LZMA_PROPERTIES_SIZE + 8, (SizeT)0xffffffff, &inProcessed, - dst, outSize, &outProcessed); - if (res != 0) { - printf("Decoding error = %d\n", res); - } - return outSize; -} diff --git a/payloads/bayou/lzmadecode.c b/payloads/bayou/lzmadecode.c deleted file mode 100644 index b03415f..0000000 --- a/payloads/bayou/lzmadecode.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "lzmadecode.h" - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) -{ - unsigned char prop0; - if (size < LZMA_PROPERTIES_SIZE) - return LZMA_RESULT_DATA_ERROR; - prop0 = propsData[0]; - if (prop0 >= (9 * 5 * 5)) - return LZMA_RESULT_DATA_ERROR; - { - for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); - for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); - propsRes->lc = prop0; - /* - unsigned char remainder = (unsigned char)(prop0 / 9); - propsRes->lc = prop0 % 9; - propsRes->pb = remainder / 5; - propsRes->lp = remainder % 5; - */ - } - - return LZMA_RESULT_OK; -} - -#define kLzmaStreamWasFinishedId (-1) - -int LzmaDecode(CLzmaDecoderState *vs, - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) -{ - CProb *p = vs->Probs; - SizeT nowPos = 0; - Byte previousByte = 0; - UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; - UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; - int lc = vs->Properties.lc; - - - int state = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - int len = 0; - const Byte *Buffer; - const Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - *inSizeProcessed = 0; - *outSizeProcessed = 0; - - { - UInt32 i; - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - } - - RC_INIT(inStream, inSize); - - - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - matchByte = outStream[nowPos - rep0]; - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - UpdateBit0(prob); - - if (nowPos == 0) - return LZMA_RESULT_DATA_ERROR; - - state = state < kNumLitStates ? 9 : 11; - previousByte = outStream[nowPos - rep0]; - outStream[nowPos++] = previousByte; - - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = kLzmaStreamWasFinishedId; - break; - } - } - - len += kMatchMinLen; - if (rep0 > nowPos) - return LZMA_RESULT_DATA_ERROR; - - - do - { - previousByte = outStream[nowPos - rep0]; - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - - *inSizeProcessed = (SizeT)(Buffer - inStream); - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/payloads/bayou/lzmadecode.h b/payloads/bayou/lzmadecode.h deleted file mode 100644 index 3771245..0000000 --- a/payloads/bayou/lzmadecode.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef LZMADECODE_H -#define LZMADECODE_H - -typedef unsigned char Byte; -typedef unsigned short UInt16; -typedef unsigned int UInt32; -typedef UInt32 SizeT; - -#define CProb UInt16 - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -#define LZMA_PROPERTIES_SIZE 5 - -typedef struct _CLzmaProperties -{ - int lc; - int lp; - int pb; -}CLzmaProperties; - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); - -#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) - -#define kLzmaNeedInitId (-2) - -typedef struct _CLzmaDecoderState -{ - CLzmaProperties Properties; - CProb *Probs; - - -} CLzmaDecoderState; - - -int LzmaDecode(CLzmaDecoderState *vs, - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); - -#endif /* LZMADECODE_H */ diff --git a/payloads/bayou/main.c b/payloads/bayou/main.c deleted file mode 100644 index cdccea1..0000000 --- a/payloads/bayou/main.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" - -static void print_banner(void) -{ - printf("\e[H\e[JBayou Payload Chooser v0.3\n"); -} - -int main(void) -{ - extern unsigned long _binary_builtin_lar_start; - struct LAR *lar; - - print_banner(); - - lar = openlar((void *)&_binary_builtin_lar_start); - - if (lar == NULL) { - printf("[CHOOSER]: Unable to scan the attached LAR file\n"); - return -1; - } - - get_configuration(lar); - - if (bayoucfg.n_entries == 0) { - printf("[CHOOSER]: No payloads were found in the LAR\n"); - return -1; - } - - /* - * If timeout == 0xFF, then show the menu immediately. - * If timeout is zero, then find and run the default item immediately. - * If there is no default item, then show the menu. - * If timeout is anything else, then show a message and wait for a - * keystroke. If there is no keystroke in time then run the default. - * If there is no default then show the menu. - */ - if (bayoucfg.timeout != 0xFF) { - struct payload *d = payload_get_default(); - - if (d != NULL) { - if (bayoucfg.timeout == 0) - run_payload(d); - else - run_payload_timeout(d, bayoucfg.timeout); - } - } - - menu(); - - return 0; -} diff --git a/payloads/bayou/menu.c b/payloads/bayou/menu.c deleted file mode 100644 index 0d312ca..0000000 --- a/payloads/bayou/menu.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <libpayload.h> -#include <curses.h> -#include "bayou.h" - -#define SCREEN_X 80 -#define SCREEN_Y 25 - -static int menu_width = 0; -static struct payload *mpayloads[BAYOU_MAX_ENTRIES]; -static int m_entries = 0; -static unsigned int selected = 0; -static WINDOW *menuwin, *status; - -void create_menu(void) -{ - int i; - - for (i = 0; i < bayoucfg.n_entries; i++) { - struct payload *p = &(bayoucfg.entries[i]); - char *name; - - if ((p->pentry.parent != 0) || - (p->pentry.flags & BPT_FLAG_NOSHOW)) - continue; - - mpayloads[m_entries++] = p; - - name = payload_get_name(p); - - if (strlen(name) > menu_width) - menu_width = strlen(name); - } - - menu_width += 4; - - if (menu_width < 30) - menu_width = 30; - - menuwin = newwin(m_entries + 3, menu_width, - (SCREEN_Y - (m_entries + 3)) / 2, - (SCREEN_X - menu_width) / 2); -} - -void draw_menu(void) -{ - struct payload *s; - int i; - - wattrset(menuwin, COLOR_PAIR(3)); - wclear(menuwin); - wborder(menuwin, ACS_VLINE, ACS_VLINE, ACS_HLINE, ACS_HLINE, - ACS_ULCORNER, ACS_URCORNER, ACS_LLCORNER, ACS_LRCORNER); - - wattrset(menuwin, COLOR_PAIR(4) | A_BOLD); - mvwprintw(menuwin, 0, (menu_width - 17) / 2, " Payload Chooser "); - - wattrset(menuwin, COLOR_PAIR(3)); - - for (i = 0; i < m_entries; i++) { - char *name = payload_get_name(mpayloads[i]); - int col = (menu_width - (2 + strlen(name))) / 2; - - if (i == selected) - wattrset(menuwin, COLOR_PAIR(5) | A_BOLD); - else - wattrset(menuwin, COLOR_PAIR(3)); - - mvwprintw(menuwin, 2 + i, col, name); - } - - s = mpayloads[selected]; - - wclear(status); - - if (s->params[BAYOU_PARAM_DESC] != NULL) { - char buf[66]; - int len = strnlen(s->params[BAYOU_PARAM_DESC], 65); - - snprintf(buf, 65, s->params[BAYOU_PARAM_DESC]); - buf[65] = 0; - - mvwprintw(status, 0, (80 - len) / 2, buf); - } - - wrefresh(menuwin); - wrefresh(status); -} - -void loop(void) -{ - int key; - - while (1) { - key = getch(); - - if (key == ERR) - continue; - - if (key == KEY_DOWN) - selected = (selected + 1) % m_entries; - else if (key == KEY_UP) - selected = (selected - 1) % m_entries; - else if (key == KEY_ENTER) { - run_payload(mpayloads[selected]); - clear(); - refresh(); - } else - continue; - - draw_menu(); - } -} - -void menu(void) -{ - initscr(); - - init_pair(1, COLOR_WHITE, COLOR_RED); - init_pair(2, COLOR_BLACK, COLOR_WHITE); - init_pair(3, COLOR_BLACK, COLOR_WHITE); - init_pair(4, COLOR_CYAN, COLOR_WHITE); - init_pair(5, COLOR_WHITE, COLOR_RED); - - wattrset(stdscr, COLOR_PAIR(1)); - wclear(stdscr); - - status = newwin(1, 80, 24, 0); - wattrset(status, COLOR_PAIR(2)); - wclear(status); - - refresh(); - - create_menu(); - draw_menu(); - - loop(); -} diff --git a/payloads/bayou/nrv2b.c b/payloads/bayou/nrv2b.c deleted file mode 100644 index 53f7988..0000000 --- a/payloads/bayou/nrv2b.c +++ /dev/null @@ -1,86 +0,0 @@ -#include <libpayload.h> - -// This GETBIT is supposed to work on little endian -// 32bit systems. The algorithm will definitely need -// some fixing on other systems, but it might not be -// a problem since the nrv2b binary behaves the same.. - -#ifndef ENDIAN -#define ENDIAN 0 -#endif -#ifndef BITSIZE -#define BITSIZE 32 -#endif - -#define GETBIT_8(bb, src, ilen) \ - (((bb = bb & 0x7f ? bb*2 : ((unsigned)src[ilen++]*2+1)) >> 8) & 1) - -#define GETBIT_LE16(bb, src, ilen) \ - (bb*=2,bb&0xffff ? (bb>>16)&1 : (ilen+=2,((bb=(src[ilen-2]+src[ilen-1]*256u)*2+1)>>16)&1)) -#define GETBIT_LE32(bb, src, ilen) \ - (bc > 0 ? ((bb>>--bc)&1) : (bc=31,\ - bb=*(const u32 *)((src)+ilen),ilen+=4,(bb>>31)&1)) - -#if ENDIAN == 0 && BITSIZE == 8 -#define GETBIT(bb, src, ilen) GETBIT_8(bb, src, ilen) -#endif -#if ENDIAN == 0 && BITSIZE == 16 -#define GETBIT(bb, src, ilen) GETBIT_LE16(bb, src, ilen) -#endif -#if ENDIAN == 0 && BITSIZE == 32 -#define GETBIT(bb, src, ilen) GETBIT_LE32(bb, src, ilen) -#endif - -unsigned long unrv2b(u8 *src, u8 *dst, unsigned long *ilen_p) -{ - unsigned long ilen = 0, olen = 0, last_m_off = 1; - u32 bb = 0; - unsigned bc = 0; - const u8 *m_pos; - - // skip length - src += 4; - /* FIXME: check olen with the length stored in first 4 bytes */ - - for (;;) { - unsigned int m_off, m_len; - while (GETBIT(bb, src, ilen)) { - dst[olen++] = src[ilen++]; - } - - m_off = 1; - do { - m_off = m_off * 2 + GETBIT(bb, src, ilen); - } while (!GETBIT(bb, src, ilen)); - if (m_off == 2) { - m_off = last_m_off; - } else { - m_off = (m_off - 3) * 256 + src[ilen++]; - if (m_off == 0xffffffffU) - break; - last_m_off = ++m_off; - } - - m_len = GETBIT(bb, src, ilen); - m_len = m_len * 2 + GETBIT(bb, src, ilen); - if (m_len == 0) { - m_len++; - do { - m_len = m_len * 2 + GETBIT(bb, src, ilen); - } while (!GETBIT(bb, src, ilen)); - m_len += 2; - } - m_len += (m_off > 0xd00); - - m_pos = dst + olen - m_off; - dst[olen++] = *m_pos++; - do { - dst[olen++] = *m_pos++; - } while (--m_len > 0); - } - - *ilen_p = ilen; - - return olen; - -} diff --git a/payloads/bayou/payload.c b/payloads/bayou/payload.c deleted file mode 100644 index a76e49f..0000000 --- a/payloads/bayou/payload.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" - -#define TIMEOUT_MESSAGE "Press ESC for the menu (%2d)...\r" -#define TIMEOUT_KEY '\033' - -void run_payload(struct payload *p) -{ - int ret, i; - - /* For chooser entries, just run the payload. */ - if (p->pentry.type == BPT_TYPE_CHOOSER) { - self_load_and_run(p, &ret); - return; - } - - /* For chained entries, run all the sub-chain items. */ - for (i = 0; i < bayoucfg.n_entries; i++) { - struct payload *s = &(bayoucfg.entries[i]); - - if (s->pentry.parent == p->pentry.index) - self_load_and_run(s, &ret); - } -} - -char *payload_get_name(struct payload *p) -{ - if (p->pentry.type == BPT_TYPE_CHAIN) - return (char *)p->pentry.title; - else if (p->pentry.type == BPT_TYPE_CHOOSER) { - if (p->pentry.title[0] != 0) - return (char *)p->pentry.title; - return p->params[BAYOU_PARAM_DESC]; - } - - return NULL; -} - -struct payload *payload_get_default(void) -{ - int i; - - for (i = 0; i < bayoucfg.n_entries; i++) { - struct payload *s = &(bayoucfg.entries[i]); - - if (s->pentry.parent == 0 && s->pentry.flags & BPT_FLAG_DEFAULT) - return s; - } - - return NULL; -} - -void run_payload_timeout(struct payload *p, int timeout) -{ - int t, ch, tval; - - for (t = timeout; t >= 0; t--) { - printf(TIMEOUT_MESSAGE, t); - - tval = 1000; - ch = getchar_timeout(&tval); - - if (ch == TIMEOUT_KEY) - return; - } - - run_payload(p); -} - -void payload_parse_params(struct payload *pload, u8 *params, int len) -{ - char *ptr = (char *)params; - int i = 0; - - if (ptr == NULL) - return; - - while (ptr < ((char *)params + len)) { - - if (!strncmp(ptr, "name=", 5)) { - pload->params[BAYOU_PARAM_NAME] = ptr + 5; - } else if (!strncmp(ptr, "desc=", 5)) { - pload->params[BAYOU_PARAM_DESC] = ptr + 5; - } else if (!strncmp(ptr, "listname=", 9)) { - pload->params[BAYOU_PARAM_LIST] = ptr + 9; - } - - ptr += strnlen(ptr, len - i); - - if (ptr < ((char *)params + len) && *ptr == 0) - ptr++; - } -} diff --git a/payloads/bayou/self.c b/payloads/bayou/self.c deleted file mode 100644 index 88e495b17..0000000 --- a/payloads/bayou/self.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" -#include "self.h" - -static int nop_decompress(void *dst, void *src, int len) -{ - memcpy(dst, src, len); - return len; -} - -#ifdef CONFIG_LZMA -extern int ulzma(u8 *, u8 *); - -static int lzma_decompress(void *dst, void *src, int len) -{ - return ulzma((u8 *) src, (u8 *) dst); -} -#endif - -#ifdef CONFIG_NRV2B -extern int unrv2b(u8 *, u8 *, unsigned long *); - -static int nrv2b_decompress(void *dst, void *src, int len) -{ - unsigned long l = (u32) len; - return unrv2b(src, dst, &l); -} -#endif - -static int zeros_decompress(void *dst, void *src, int len) -{ - memset(dst, 0, len); - return len; -} - -int self_get_params(u8 *fptr, u8 **params) -{ - struct self_segment *seg = (struct self_segment *)fptr; - - while (seg->type != SELF_TYPE_ENTRY) { - if (seg->type == 0) - return -1; - - if (seg->type == SELF_TYPE_PARAMS) { - *params = (u8 *) (fptr + seg->offset); - return seg->len; - } - - seg++; - } - - *params = NULL; - - return 0; -} - -int verify_self(u8 *ptr) -{ - struct self_segment *seg = (struct self_segment *)ptr; - - switch (seg->type) { - case SELF_TYPE_CODE: - case SELF_TYPE_DATA: - case SELF_TYPE_BSS: - case SELF_TYPE_PARAMS: - case SELF_TYPE_ENTRY: - return 1; - } - - return 0; -} - -int self_load_and_run(struct payload *p, int *ret) -{ - struct self_segment *seg = (struct self_segment *)p->fptr; - int (*dcmp) (void *, void *, int); - int dlen; - - switch (p->stat.compression) { -#ifdef CONFIG_LZMA - case ALGO_LZMA: - dcmp = lzma_decompress; - break; -#endif -#ifdef CONFIG_NRV2B - case ALGO_NRV2B: - dcmp = nrv2b_decompress; - break; -#endif - case ALGO_ZEROES: - dcmp = zeros_decompress; - break; - case ALGO_NONE: - dcmp = nop_decompress; - default: - printf("E: Unsupported decompression type\n"); - return -1; - } - - while (1) { - u32 laddr = (u32) (seg->load_addr & 0xFFFFFFFF); - - switch (seg->type) { - case SELF_TYPE_CODE: - case SELF_TYPE_DATA: - dlen = dcmp((void *)laddr, - (void *)p->fptr + seg->offset, seg->len); - - if (dlen < seg->mem_len) { - memset((void *)(laddr + dlen), 0, - seg->mem_len - dlen); - } - break; - - case SELF_TYPE_BSS: - memset((void *)laddr, 0, seg->len); - break; - case SELF_TYPE_ENTRY: - *ret = exec(laddr, 0, NULL); - return 0; - default: - break; - } - - seg++; - } - - return -1; -} diff --git a/payloads/bayou/self.h b/payloads/bayou/self.h deleted file mode 100644 index a341899..0000000 --- a/payloads/bayou/self.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef SELF_H_ -#define SELF_H_ - -#include <libpayload.h> - -struct self_segment { - u32 type; - u32 offset; - u64 load_addr; - u32 len; - u32 mem_len; -}; - -struct self { - struct larstat stat; - void *fptr; -}; - -#define SELF_TYPE_CODE 0x45444F43 -#define SELF_TYPE_DATA 0x41544144 -#define SELF_TYPE_BSS 0x20535342 -#define SELF_TYPE_PARAMS 0x41524150 -#define SELF_TYPE_ENTRY 0x52544E45 - -#endif -- To view, visit https://review.coreboot.org/c/coreboot/+/37424 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I37ea69c94c7fa721a6ccfb92e4b3e993627599f6 Gerrit-Change-Number: 37424 Gerrit-PatchSet: 1 Gerrit-Owner: ron minnich <rminnich(a)gmail.com> Gerrit-MessageType: newchange

3 7

Change in coreboot[master]: dddd
by Subrata Banik (Code Review) 05 Dec '19

05 Dec '19

Subrata Banik has abandoned this change. ( https://review.coreboot.org/c/coreboot/+/37531 ) Change subject: dddd ...................................................................... Abandoned -- To view, visit https://review.coreboot.org/c/coreboot/+/37531 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I2879a8739012863837e23e60fed5eb6ee209dea1 Gerrit-Change-Number: 37531 Gerrit-PatchSet: 1 Gerrit-Owner: Subrata Banik <subrata.banik(a)intel.com> Gerrit-MessageType: abandon

1 0

Change in coreboot[master]: x86/tsc: Only call tsc_freq_mhz once to init clock
by Mathew King (Code Review) 05 Dec '19

05 Dec '19

Mathew King has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36664 ) Change subject: x86/tsc: Only call tsc_freq_mhz once to init clock ...................................................................... x86/tsc: Only call tsc_freq_mhz once to init clock This change partially reverts https://review.coreboot.org/c/coreboot/+/33928 by only calling tsc_freq_mhz on timer init and storing the result. The change caused an error on Drallion where coreboot could not communicate with the TPM on a cold boot causing the system to not boot. BUG=b:144002424 TEST=Repeatedly cold boot drallion without TPM errors Change-Id: I8e9edafa3007568e8d27e3c19c9fd6fa7637786c Signed-off-by: Mathew King <mathewk(a)chromium.org> --- M src/cpu/x86/tsc/delay_tsc.c 1 file changed, 12 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/64/36664/1 diff --git a/src/cpu/x86/tsc/delay_tsc.c b/src/cpu/x86/tsc/delay_tsc.c index 7aa887a..dcec4fb 100644 --- a/src/cpu/x86/tsc/delay_tsc.c +++ b/src/cpu/x86/tsc/delay_tsc.c @@ -18,9 +18,18 @@ #include <delay.h> #include <thread.h> +static unsigned long clocks_per_usec CAR_GLOBAL; + void init_timer(void) { - (void)tsc_freq_mhz(); + if (!car_get_var(clocks_per_usec)) + car_set_var(clocks_per_usec, tsc_freq_mhz()); +} + +static inline unsigned long get_clocks_per_usec(void) +{ + init_timer(); + return car_get_var(clocks_per_usec); } void udelay(unsigned int us) @@ -34,7 +43,7 @@ start = rdtscll(); clocks = us; - clocks *= tsc_freq_mhz(); + clocks *= get_clocks_per_usec(); current = rdtscll(); while ((current - start) < clocks) { cpu_relax(); @@ -72,7 +81,7 @@ current_tick = rdtscll(); ticks_elapsed = current_tick - mono_counter->last_value; - ticks_per_usec = tsc_freq_mhz(); + ticks_per_usec = get_clocks_per_usec(); /* Update current time and tick values only if a full tick occurred. */ if (ticks_elapsed >= ticks_per_usec) { -- To view, visit https://review.coreboot.org/c/coreboot/+/36664 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I8e9edafa3007568e8d27e3c19c9fd6fa7637786c Gerrit-Change-Number: 36664 Gerrit-PatchSet: 1 Gerrit-Owner: Mathew King <mathewk(a)chromium.org> Gerrit-MessageType: newchange

4 9

Change in coreboot[master]: superio/fintek/f81866d: capitalize 'TODO'
by HAOUAS Elyes (Code Review) 05 Dec '19

05 Dec '19

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37504 ) Change subject: superio/fintek/f81866d: capitalize 'TODO' ...................................................................... superio/fintek/f81866d: capitalize 'TODO' Change-Id: I2879a8739012863837e23e60fed5eb6ee209dea0 Signed-off-by: Elyes HAOUAS <ehaouas(a)noos.fr> --- M src/superio/fintek/f81866d/f81866d_hwm.c 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/04/37504/1 diff --git a/src/superio/fintek/f81866d/f81866d_hwm.c b/src/superio/fintek/f81866d/f81866d_hwm.c index 8b6435c..1b49968 100644 --- a/src/superio/fintek/f81866d/f81866d_hwm.c +++ b/src/superio/fintek/f81866d/f81866d_hwm.c @@ -17,7 +17,7 @@ */ /* Setup only for Fan2 - * Todo: Add support for Fan1 and Fan3 + * TODO: Add support for Fan1 and Fan3 */ #include <console/console.h> -- To view, visit https://review.coreboot.org/c/coreboot/+/37504 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I2879a8739012863837e23e60fed5eb6ee209dea0 Gerrit-Change-Number: 37504 Gerrit-PatchSet: 1 Gerrit-Owner: HAOUAS Elyes <ehaouas(a)noos.fr> Gerrit-MessageType: newchange

2 2

Change in coreboot[master]: superio/serverengines/pilot: Fix typo
by HAOUAS Elyes (Code Review) 05 Dec '19

05 Dec '19

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37508 ) Change subject: superio/serverengines/pilot: Fix typo ...................................................................... superio/serverengines/pilot: Fix typo Change-Id: Ic7cd93150252b2e5235c82c8c63540059b68d22b Signed-off-by: Elyes HAOUAS <ehaouas(a)noos.fr> --- M src/superio/serverengines/pilot/early_serial.c 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/08/37508/1 diff --git a/src/superio/serverengines/pilot/early_serial.c b/src/superio/serverengines/pilot/early_serial.c index 555e4f5..3c140fb 100644 --- a/src/superio/serverengines/pilot/early_serial.c +++ b/src/superio/serverengines/pilot/early_serial.c @@ -22,7 +22,7 @@ #include <device/pnp.h> #include "pilot.h" -/* Pilot uses 0x5A/0xA5 pattern to actiavte deactivate config access. */ +/* Pilot uses 0x5A/0xA5 pattern to activate deactivate config access. */ void pnp_enter_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; -- To view, visit https://review.coreboot.org/c/coreboot/+/37508 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ic7cd93150252b2e5235c82c8c63540059b68d22b Gerrit-Change-Number: 37508 Gerrit-PatchSet: 1 Gerrit-Owner: HAOUAS Elyes <ehaouas(a)noos.fr> Gerrit-MessageType: newchange

3 3

Change in coreboot[master]: superio/smsc/lpc47n2{17,27}: Fix typo
by HAOUAS Elyes (Code Review) 05 Dec '19

05 Dec '19

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37510 ) Change subject: superio/smsc/lpc47n2{17,27}: Fix typo ...................................................................... superio/smsc/lpc47n2{17,27}: Fix typo Change-Id: I29a42908af5699200216b7a0082e1417c90c95a6 Signed-off-by: Elyes HAOUAS <ehaouas(a)noos.fr> --- M src/superio/smsc/lpc47n217/early_serial.c M src/superio/smsc/lpc47n227/early_serial.c 2 files changed, 2 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/10/37510/1 diff --git a/src/superio/smsc/lpc47n217/early_serial.c b/src/superio/smsc/lpc47n217/early_serial.c index 5fb8d7f..8037ee8 100644 --- a/src/superio/smsc/lpc47n217/early_serial.c +++ b/src/superio/smsc/lpc47n217/early_serial.c @@ -69,7 +69,7 @@ * true base port is programmed (see lpc47n217_enable_serial() below). * * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. - * @param enable 0 to disable, anythig else to enable. + * @param enable 0 to disable, anything else to enable. */ static void lpc47n217_pnp_set_enable(pnp_devfn_t dev, int enable) { diff --git a/src/superio/smsc/lpc47n227/early_serial.c b/src/superio/smsc/lpc47n227/early_serial.c index 42213b7..9e6ecd7 100644 --- a/src/superio/smsc/lpc47n227/early_serial.c +++ b/src/superio/smsc/lpc47n227/early_serial.c @@ -73,7 +73,7 @@ * true base port is programmed (see lpc47n227_enable_serial() below). * * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. - * @param enable 0 to disable, anythig else to enable. + * @param enable 0 to disable, anything else to enable. */ static void lpc47n227_pnp_set_enable(pnp_devfn_t dev, int enable) { -- To view, visit https://review.coreboot.org/c/coreboot/+/37510 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I29a42908af5699200216b7a0082e1417c90c95a6 Gerrit-Change-Number: 37510 Gerrit-PatchSet: 1 Gerrit-Owner: HAOUAS Elyes <ehaouas(a)noos.fr> Gerrit-MessageType: newchange

3 3

Change in coreboot[master]: superio/ite/it8528e: Fix typo
by HAOUAS Elyes (Code Review) 05 Dec '19

05 Dec '19

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37505 ) Change subject: superio/ite/it8528e: Fix typo ...................................................................... superio/ite/it8528e: Fix typo Change-Id: I40035bf622fea2ff7aed74dce125cbf6265afa6e Signed-off-by: Elyes HAOUAS <ehaouas(a)noos.fr> --- M src/superio/ite/it8528e/it8528e.h 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/05/37505/1 diff --git a/src/superio/ite/it8528e/it8528e.h b/src/superio/ite/it8528e/it8528e.h index d9d07d0..a065b7d 100644 --- a/src/superio/ite/it8528e/it8528e.h +++ b/src/superio/ite/it8528e/it8528e.h @@ -27,7 +27,7 @@ #define IT8528E_RTCT 0x10 /* RTC-like Timer */ #define IT8528E_PMC1 0x11 /* Power Management Channel 1 */ #define IT8528E_PMC2 0x12 /* Power Management Channel 2 */ -#define IT8528E_SSPI 0x13 /* Serial Periphial Interface */ +#define IT8528E_SSPI 0x13 /* Serial Peripheral Interface */ #define IT8528E_PECI 0x14 /* Platform EC Interface */ #define IT8528E_PMC3 0x17 /* Power Management Channel 3 */ #define IT8528E_PMC4 0x18 /* Power Management Channel 4 */ -- To view, visit https://review.coreboot.org/c/coreboot/+/37505 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I40035bf622fea2ff7aed74dce125cbf6265afa6e Gerrit-Change-Number: 37505 Gerrit-PatchSet: 1 Gerrit-Owner: HAOUAS Elyes <ehaouas(a)noos.fr> Gerrit-MessageType: newchange

3 3

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit December 2019