coreboot-gerrit January 2021

coreboot-gerrit@coreboot.org

1 participants
6012 discussions

Change in coreboot[master]: [WIP]cpu/x86/cache: CLFLUSH programs to memory before running
by Arthur Heymans (Code Review) 13 Mar '23

13 Mar '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37196 ) Change subject: [WIP]cpu/x86/cache: CLFLUSH programs to memory before running ...................................................................... [WIP]cpu/x86/cache: CLFLUSH programs to memory before running When cbmem is initialized in romstage and postcar placed in the stage cache + cbmem where it is run, the assumption is made that this are all in UC memory such that calling invd in postcar is ok. For performance reasons (e.g. postcar decompression) it is desirable to cache cbmem and the stage cache during romstage. Another reason is that AGESA sets up MTRR during romstage to cache all dram, which is currently worked around by using additional MTRR to make that UC. TODO be nice to reviewers and spit some parts off. UNTESTED Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/arch/x86/postcar_loader.c M src/cpu/x86/cache/Makefile.inc M src/cpu/x86/cache/cache.c M src/include/cpu/x86/cache.h 4 files changed, 68 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/96/37196/1 diff --git a/src/arch/x86/postcar_loader.c b/src/arch/x86/postcar_loader.c index b53cbf8..53ab4f9 100644 --- a/src/arch/x86/postcar_loader.c +++ b/src/arch/x86/postcar_loader.c @@ -208,6 +208,21 @@ MTRR_TYPE_WRBACK); } +/* + * POSTCAR will call invd so don't make assumptions on cbmem + * and external stage cache being UC. + */ +static void postcar_flush_cache(void) +{ + uintptr_t stage_cache_base; + size_t stage_cache_size; + prog_segment_loaded((uintptr_t)cbmem_top(), cbmem_overhead_size(), SEG_FINAL); + if (CONFIG(TSEG_STAGE_CACHE)) { + stage_cache_external_region((void **)&stage_cache_base, &stage_cache_size); + prog_segment_loaded(stage_cache_base, stage_cache_size, SEG_FINAL); + } +} + void run_postcar_phase(struct postcar_frame *pcf) { struct prog prog = @@ -222,8 +237,10 @@ parameters between S3 resume and normal boot. On the platforms where the values are the same it's a nop. */ finalize_load(prog.arg, pcf->stack); - } else + } else { load_postcar_cbfs(&prog, pcf); + postcar_flush_cache(); + } /* As postcar exist, it's end of romstage here */ timestamp_add_now(TS_END_ROMSTAGE); diff --git a/src/cpu/x86/cache/Makefile.inc b/src/cpu/x86/cache/Makefile.inc index b33b9ee..759488e 100644 --- a/src/cpu/x86/cache/Makefile.inc +++ b/src/cpu/x86/cache/Makefile.inc @@ -1 +1,2 @@ +romstage-y += cache.c ramstage-y += cache.c diff --git a/src/cpu/x86/cache/cache.c b/src/cpu/x86/cache/cache.c index 2313c4d..ac2c45b 100644 --- a/src/cpu/x86/cache/cache.c +++ b/src/cpu/x86/cache/cache.c @@ -11,8 +11,11 @@ * GNU General Public License for more details. */ +#include <cbmem.h> +#include <program_loading.h> #include <console/console.h> #include <cpu/x86/cache.h> +#include <arch/cpu.h> void x86_enable_cache(void) { @@ -20,3 +23,47 @@ printk(BIOS_INFO, "Enabling cache\n"); enable_cache(); } + +int clflush_supported(void) +{ + return (cpuid_edx(1) >> 19) & 1; +} + +static void clflush_region(uintptr_t start, size_t size) +{ + uintptr_t addr; + size_t cl_size = (cpuid_ebx(1) >> 8) & 0xff; + if (!clflush_supported()) + return; + for (addr = (start / cl_size) * cl_size; addr < start + size; addr += cl_size) + clflush((void *)addr); +} + +static int dram_ready; + +/* + * For each segment of a program loaded this function is called + * to invalidate caches for the addresses of the loaded segment + */ +void arch_segment_loaded(uintptr_t start, size_t size, int flags) +{ + /* INVD is only called in postcar stage so we only need + to make sure that our things hit dram during romstage. */ + if (!ENV_ROMSTAGE) + return; + if (flags != SEG_FINAL) + return; + if (!dram_ready) + return; + + if (!clflush_supported()) + printk(BIOS_DEBUG, "Not flushing cache to ram, CLFLUSH not supported\n"); + clflush_region(start, size); +} + +static void set_dram_ready(int unused) +{ + dram_ready = 1; +} + +ROMSTAGE_CBMEM_INIT_HOOK(set_dram_ready); diff --git a/src/include/cpu/x86/cache.h b/src/include/cpu/x86/cache.h index 713ca32..2d2727f 100644 --- a/src/include/cpu/x86/cache.h +++ b/src/include/cpu/x86/cache.h @@ -55,6 +55,8 @@ asm volatile ("clflush (%0)"::"r" (addr)); } +int clflush_supported(void); + /* The following functions require the __always_inline due to AMD * function STOP_CAR_AND_CPU that disables cache as * RAM, the cache as RAM stack can no longer be used. Called -- To view, visit https://review.coreboot.org/c/coreboot/+/37196 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b Gerrit-Change-Number: 37196 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

10 45

Change in coreboot[master]: arch/x86: Add option to compress postcar stage
by Arthur Heymans (Code Review) 10 Mar '23

10 Mar '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36674 ) Change subject: arch/x86: Add option to compress postcar stage ...................................................................... arch/x86: Add option to compress postcar stage The LZ4 decompressor was already linked in romstage. Change-Id: I89fdc6066027447bf72968c66e6f5eb5fbb630c7 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/Kconfig M src/arch/x86/Makefile.inc 2 files changed, 19 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/74/36674/1 diff --git a/src/Kconfig b/src/Kconfig index 0d56291..17bf545 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -158,6 +158,16 @@ that decompression might slow down booting if the boot flash is connected through a slow link (i.e. SPI). +config COMPRESS_POSTCAR + bool "Compress postcar with LZ4" + depends on POSTCAR_STAGE + # Default value set at the end of the file + help + Compress postcar with LZ4 to save flash space and speed up boot, + since the time for reading the image from SPI (and in the vboot + case verifying it) is usually much greater than the time spent + decompressing. + config COMPRESS_PRERAM_STAGES bool "Compress romstage and verstage with LZ4" depends on !ARCH_X86 && (HAVE_ROMSTAGE || HAVE_VERSTAGE) @@ -1203,6 +1213,9 @@ config COMPRESS_RAMSTAGE default y if !UNCOMPRESSED_RAMSTAGE +config COMPRESS_POSTCAR + default y + config COMPRESS_PRERAM_STAGES depends on !ARCH_X86 default y diff --git a/src/arch/x86/Makefile.inc b/src/arch/x86/Makefile.inc index 447fd57..8c35176 100644 --- a/src/arch/x86/Makefile.inc +++ b/src/arch/x86/Makefile.inc @@ -278,11 +278,16 @@ $(objcbfs)/postcar.elf: $(objcbfs)/postcar.debug.rmod cp $< $@ +CBFS_POSTCAR_COMPRESS_FLAG := none +ifeq ($(CONFIG_COMPRESS_POSTCAR),y) +CBFS_POSTCAR_COMPRESS_FLAG := lz4 +endif + # Add postcar to CBFS cbfs-files-$(CONFIG_POSTCAR_STAGE) += $(CONFIG_CBFS_PREFIX)/postcar $(CONFIG_CBFS_PREFIX)/postcar-file := $(objcbfs)/postcar.elf $(CONFIG_CBFS_PREFIX)/postcar-type := stage -$(CONFIG_CBFS_PREFIX)/postcar-compression := none +$(CONFIG_CBFS_PREFIX)/postcar-compression := $(CBFS_POSTCAR_COMPRESS_FLAG) ############################################################################### # ramstage -- To view, visit https://review.coreboot.org/c/coreboot/+/36674 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I89fdc6066027447bf72968c66e6f5eb5fbb630c7 Gerrit-Change-Number: 36674 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

9 23

Change in ...coreboot[master]: mb/apple: Add MacBook Air 5,2 (A1466)
by Evgeny Zinoviev (Code Review) 08 Mar '23

08 Mar '23

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32604 Change subject: mb/apple: Add MacBook Air 5,2 (A1466) ...................................................................... mb/apple: Add MacBook Air 5,2 (A1466) This is WIP. Change-Id: I1ebe6f87a8254871698be74f913b9d969d722447 Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- A src/mainboard/apple/macbookair5_2/Kconfig A src/mainboard/apple/macbookair5_2/Kconfig.name A src/mainboard/apple/macbookair5_2/Makefile.inc A src/mainboard/apple/macbookair5_2/acpi/ec.asl A src/mainboard/apple/macbookair5_2/acpi/platform.asl A src/mainboard/apple/macbookair5_2/acpi/superio.asl A src/mainboard/apple/macbookair5_2/acpi_tables.c A src/mainboard/apple/macbookair5_2/board_info.txt A src/mainboard/apple/macbookair5_2/devicetree.cb A src/mainboard/apple/macbookair5_2/dsdt.asl A src/mainboard/apple/macbookair5_2/gma-mainboard.ads A src/mainboard/apple/macbookair5_2/gnvs.c A src/mainboard/apple/macbookair5_2/gpio.c A src/mainboard/apple/macbookair5_2/hda_verb.c A src/mainboard/apple/macbookair5_2/mainboard.c A src/mainboard/apple/macbookair5_2/romstage.c A src/mainboard/apple/macbookair5_2/spd.bin 17 files changed, 843 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/04/32604/1 diff --git a/src/mainboard/apple/macbookair5_2/Kconfig b/src/mainboard/apple/macbookair5_2/Kconfig new file mode 100644 index 0000000..853021f --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/Kconfig @@ -0,0 +1,55 @@ +if BOARD_APPLE_MACBOOKAIR5_2 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select EC_ACPI + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select NORTHBRIDGE_INTEL_IVYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_C216 + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + select MAINBOARD_HAS_LIBGFXINIT + select GFX_GMA_INTERNAL_IS_LVDS + select SERIRQ_CONTINUOUS_MODE + +config MAINBOARD_DIR + string + default apple/macbookair5_2 + +config MAINBOARD_PART_NUMBER + string + default "MacBookAir5,2" + +config VGA_BIOS_FILE + string + default "pci8086,0166.rom" + +config VGA_BIOS_ID + string + default "8086,0166" + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x7270 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x8086 + +config DRAM_RESET_GATE_GPIO # FIXME: check this + int + default 60 + +config MAX_CPUS + int + default 8 + +config MAINBOARD_SMBIOS_MANUFACTURER + string + default "Apple Inc." + +endif diff --git a/src/mainboard/apple/macbookair5_2/Kconfig.name b/src/mainboard/apple/macbookair5_2/Kconfig.name new file mode 100644 index 0000000..d8a1fbf --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_APPLE_MACBOOKAIR5_2 + bool "MacBookAir5,2" diff --git a/src/mainboard/apple/macbookair5_2/Makefile.inc b/src/mainboard/apple/macbookair5_2/Makefile.inc new file mode 100644 index 0000000..fd60338 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/Makefile.inc @@ -0,0 +1,7 @@ +romstage-y += gpio.c + +cbfs-files-y += spd.bin +spd.bin-file := spd.bin +spd.bin-type := spd + +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/apple/macbookair5_2/acpi/ec.asl b/src/mainboard/apple/macbookair5_2/acpi/ec.asl new file mode 100644 index 0000000..f70cb3d --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi/ec.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Device(EC) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 0) + Name (_GPE, 23) +/* FIXME: EC support */ +} diff --git a/src/mainboard/apple/macbookair5_2/acpi/platform.asl b/src/mainboard/apple/macbookair5_2/acpi/platform.asl new file mode 100644 index 0000000..a17c6ea --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi/platform.asl @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Method(_WAK,1) +{ + /* FIXME: EC support */ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ + /* FIXME: EC support */ +} diff --git a/src/mainboard/apple/macbookair5_2/acpi/superio.asl b/src/mainboard/apple/macbookair5_2/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi/superio.asl diff --git a/src/mainboard/apple/macbookair5_2/acpi_tables.c b/src/mainboard/apple/macbookair5_2/acpi_tables.c new file mode 100644 index 0000000..c48f0bd --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi_tables.c @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/apple/macbookair5_2/board_info.txt b/src/mainboard/apple/macbookair5_2/board_info.txt new file mode 100644 index 0000000..cbd72ee --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/board_info.txt @@ -0,0 +1,6 @@ +Category: laptop +ROM protocol: SPI +Flashrom support: n +ROM package: WSON-8 +ROM socketed: n +Release year: 2012 diff --git a/src/mainboard/apple/macbookair5_2/devicetree.cb b/src/mainboard/apple/macbookair5_2/devicetree.cb new file mode 100644 index 0000000..efc5ddb --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/devicetree.cb @@ -0,0 +1,119 @@ +chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did + register "gfx.did" = "{ 0x80000410, 0x80000320, 0x80000410, 0x80000410, 0x00000005 }" + #register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.link_frequency_270_mhz" = "0" + register "gfx.ndid" = "2" + register "gfx.use_spread_spectrum_clock" = "1" + register "gpu_cpu_backlight" = "0x00000710" + register "gpu_dp_b_hotplug" = "4" + register "gpu_dp_c_hotplug" = "4" + register "gpu_dp_d_hotplug" = "4" + register "gpu_panel_port_select" = "1" + register "gpu_panel_power_backlight_off_delay" = "2000" + register "gpu_panel_power_backlight_on_delay" = "10" + register "gpu_panel_power_cycle_delay" = "6" + register "gpu_panel_power_down_delay" = "740" + register "gpu_panel_power_up_delay" = "2000" + register "gpu_pch_backlight" = "0x07100710" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax # FIXME: check all registers + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on end + device lapic 0xacac off end + end + end + + register "pci_mmio_size" = "2048" + + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "0" + register "gen1_dec" = "0x000c0681" + register "gen2_dec" = "0x000c1641" + register "gen3_dec" = "0x001c0301" + register "gen4_dec" = "0x00fc0701" + register "gpi7_routing" = "2" + register "p_cnt_throttling_supported" = "1" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x1" + register "spi_lvscc" = "0x0" + register "spi_uvscc" = "0x2005" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x08040201" + register "xhci_switchable_ports" = "0x0000000f" + device pci 14.0 on # USB 3.0 Controller + subsystemid 0x8086 0x7270 + end + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x8086 0x7270 + end + device pci 16.1 off # Management Engine Interface 2 + end + device pci 16.2 off # Management Engine IDE-R + end + device pci 16.3 off # Management Engine KT + end + device pci 19.0 off # Intel Gigabit Ethernet + end + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x8086 0x7270 + end + device pci 1b.0 on # High Definition Audio Audio controller + subsystemid 0x8086 0x7270 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x8086 0x7270 + end + device pci 1c.1 on # PCIe Port #2 + subsystemid 0x8086 0x7270 + end + device pci 1c.2 off # PCIe Port #3 + end + device pci 1c.3 off # PCIe Port #4 + end + device pci 1c.4 on # PCIe Port #5 + subsystemid 0x8086 0x7270 + end + device pci 1c.5 off # PCIe Port #6 + end + device pci 1c.6 off # PCIe Port #7 + end + device pci 1c.7 off # PCIe Port #8 + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x8086 0x7270 + end + device pci 1e.0 off # PCI bridge + end + device pci 1f.0 on # LPC bridge PCI-LPC bridge + subsystemid 0x8086 0x7270 + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x8086 0x7270 + end + device pci 1f.3 on # SMBus + subsystemid 0x8086 0x7270 + end + device pci 1f.5 off # SATA Controller 2 + end + device pci 1f.6 off # Thermal + end + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x106b 0x00fe + end + device pci 01.0 off # PCIe Bridge for discrete graphics + end + device pci 02.0 on # Internal graphics VGA controller + subsystemid 0x106b 0x00fe + end + end +end diff --git a/src/mainboard/apple/macbookair5_2/dsdt.asl b/src/mainboard/apple/macbookair5_2/dsdt.asl new file mode 100644 index 0000000..455ac17 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/dsdt.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB +#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0 + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + /* Some generic macros */ + #include "acpi/platform.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + /* global NVS and variables. */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/apple/macbookair5_2/gma-mainboard.ads b/src/mainboard/apple/macbookair5_2/gma-mainboard.ads new file mode 100644 index 0000000..d4a5d7d --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/gma-mainboard.ads @@ -0,0 +1,34 @@ +-- +-- This file is part of the coreboot project. +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (DP1, + DP2, + DP3, + HDMI1, + HDMI2, + HDMI3, + Analog, + Internal, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/apple/macbookair5_2/gnvs.c b/src/mainboard/apple/macbookair5_2/gnvs.c new file mode 100644 index 0000000..def9e5f --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/gnvs.c @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* the lid is open by default. */ + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/apple/macbookair5_2/gpio.c b/src/mainboard/apple/macbookair5_2/gpio.c new file mode 100644 index 0000000..9f2cd14 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/gpio.c @@ -0,0 +1,242 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_OUTPUT, + .gpio21 = GPIO_DIR_OUTPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_LOW, + .gpio15 = GPIO_LEVEL_HIGH, + .gpio16 = GPIO_LEVEL_LOW, + .gpio19 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_LOW, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio11 = GPIO_RESET_RSMRST, + .gpio15 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio2 = GPIO_INVERT, + .gpio4 = GPIO_INVERT, + .gpio5 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_GPIO, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_OUTPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_LOW, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_LOW, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_GPIO, + .gpio65 = GPIO_MODE_GPIO, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_OUTPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, + .gpio65 = GPIO_LEVEL_LOW, + .gpio66 = GPIO_LEVEL_LOW, + .gpio67 = GPIO_LEVEL_LOW, + .gpio74 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/apple/macbookair5_2/hda_verb.c b/src/mainboard/apple/macbookair5_2/hda_verb.c new file mode 100644 index 0000000..6c8e555 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/hda_verb.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10134206, /* Codec Vendor / Device ID: Cirrus */ + 0x106b5600, /* Subsystem ID */ + + 0x0000000b, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x106b5600), + + /* NID 0x09. */ + AZALIA_PIN_CFG(0x0, 0x09, 0x0e2b4030), + + /* NID 0x0a. */ + AZALIA_PIN_CFG(0x0, 0x0a, 0x400000f0), + + /* NID 0x0b. */ + AZALIA_PIN_CFG(0x0, 0x0b, 0x90100120), + + /* NID 0x0c. */ + AZALIA_PIN_CFG(0x0, 0x0c, 0x400000f0), + + /* NID 0x0d. */ + AZALIA_PIN_CFG(0x0, 0x0d, 0x90a00110), + + /* NID 0x0e. */ + AZALIA_PIN_CFG(0x0, 0x0e, 0x400000f0), + + /* NID 0x0f. */ + AZALIA_PIN_CFG(0x0, 0x0f, 0x400000f0), + + /* NID 0x10. */ + AZALIA_PIN_CFG(0x0, 0x10, 0x400000f0), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x0, 0x12, 0x400000f0), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x0, 0x15, 0x400000f0), + 0x80862806, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + + 0x00000004, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x3, 0x80860101), + + /* NID 0x05. */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* NID 0x06. */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560010), + + /* NID 0x07. */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560010), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/apple/macbookair5_2/mainboard.c b/src/mainboard/apple/macbookair5_2/mainboard.c new file mode 100644 index 0000000..d497c51 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/mainboard.c @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/acpi/ec.h> +#include <console/console.h> + +static void mainboard_init(struct device *dev) +{ + /* FIXME: trim this down or remove if necessary */ +// { +// int i; +// const u8 dmp[256] = { +// /* 00 */ 0x40, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 10 */ 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 20 */ 0x00, 0x80, 0x16, 0x16, 0xe0, 0x40, 0x4f, 0x4e, 0x7a, 0x34, 0x35, 0x31, 0x38, 0x31, 0x32, 0x44, +// /* 30 */ 0x4b, 0x52, 0x4e, 0x41, 0x38, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x41, 0x42, +// /* 40 */ 0x43, 0x44, 0x45, 0x00, 0x02, 0x14, 0x11, 0x10, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 50 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 60 */ 0x03, 0x00, 0x00, 0x00, 0x0f, 0x3d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 70 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 80 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 90 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* a0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* b0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* c0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* d0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* e0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* f0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// }; +// +// printk(BIOS_DEBUG, "Replaying EC dump ..."); +// for (i = 0; i < 256; i++) +// ec_write (i, dmp[i]); +// printk(BIOS_DEBUG, "done\n"); +// } + + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00800000; +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + +// /* FIXME: fix those values*/ +// install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, +// GMA_INT15_PANEL_FIT_DEFAULT, +// GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/apple/macbookair5_2/romstage.c b/src/mainboard/apple/macbookair5_2/romstage.c new file mode 100644 index 0000000..6594b15 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/romstage.c @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* FIXME: Check if all includes are needed. */ + +#include <stdint.h> +#include <string.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <device/mmio.h> +#include <device/pci_ops.h> +#include <device/pnp_ops.h> +#include <console/console.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/common/gpio.h> +#include <cbfs.h> + +void pch_enable_lpc(void) +{ + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x40, 0x00000401); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0070); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x000c0681); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000c1641); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x001c0301); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x00fc0701); +} + +void mainboard_rcba_config(void) +{ + RCBA32(0x3414) = 0x00000020; +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, 0 }, + { 1, 0, 1 }, + { 1, 0, 2 }, + { 1, 0, 3 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + void *spd_file; + size_t spd_file_len = 0; + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (spd_file && spd_file_len >= 512) { + memcpy(&spd[0], spd_file, 128); + memcpy(&spd[2], spd_file + 256, 128); + } +} diff --git a/src/mainboard/apple/macbookair5_2/spd.bin b/src/mainboard/apple/macbookair5_2/spd.bin new file mode 100644 index 0000000..2e2a6b4 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/spd.bin Binary files differ -- To view, visit https://review.coreboot.org/c/coreboot/+/32604 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I1ebe6f87a8254871698be74f913b9d969d722447 Gerrit-Change-Number: 32604 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.com> Gerrit-MessageType: newchange

6 57

Change in coreboot[master]: mb/gigabyte: Add Gigabyte Z170X-Gaming 7
by Christoph Pomaska (Code Review) 02 Mar '23

02 Mar '23

Christoph Pomaska has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38920 ) Change subject: mb/gigabyte: Add Gigabyte Z170X-Gaming 7 ...................................................................... mb/gigabyte: Add Gigabyte Z170X-Gaming 7 Change-Id: Ib2c69bddd22cbd8f797dbb57370a4d8e5afa63bc --- A src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig A src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig.name A src/mainboard/gigabyte/ga-z170x-gaming7/Makefile.inc A src/mainboard/gigabyte/ga-z170x-gaming7/acpi/dptf.asl A src/mainboard/gigabyte/ga-z170x-gaming7/acpi/ec.asl A src/mainboard/gigabyte/ga-z170x-gaming7/acpi/mainboard.asl A src/mainboard/gigabyte/ga-z170x-gaming7/acpi/superio.asl A src/mainboard/gigabyte/ga-z170x-gaming7/board_info.txt A src/mainboard/gigabyte/ga-z170x-gaming7/cmos.default A src/mainboard/gigabyte/ga-z170x-gaming7/cmos.layout A src/mainboard/gigabyte/ga-z170x-gaming7/devicetree.cb A src/mainboard/gigabyte/ga-z170x-gaming7/dsdt.asl A src/mainboard/gigabyte/ga-z170x-gaming7/gma-mainboard.ads A src/mainboard/gigabyte/ga-z170x-gaming7/gpio.h A src/mainboard/gigabyte/ga-z170x-gaming7/hda_verb.c A src/mainboard/gigabyte/ga-z170x-gaming7/include/gpio.h A src/mainboard/gigabyte/ga-z170x-gaming7/mainboard.c A src/mainboard/gigabyte/ga-z170x-gaming7/ramstage.c A src/mainboard/gigabyte/ga-z170x-gaming7/romstage.c 19 files changed, 1,704 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/20/38920/1 diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig b/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig new file mode 100644 index 0000000..3218b39 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig @@ -0,0 +1,49 @@ +if BOARD_GIGABYTE_GA_Z170X_GAMING_7 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_16384 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select INTEL_GMA_HAVE_VBT + select INTEL_INT15 + select SOC_INTEL_KABYLAKE + select SKYLAKE_SOC_PCH_H + select SUPERIO_ITE_IT8528E # board has actually IT8628E + +config IRQ_SLOT_COUNT + int + default 18 + +config MAINBOARD_DIR + string + default "gigabyte/ga-z170x-gaming7" + +config MAINBOARD_PART_NUMBER + string + default "Z170X-Gaming 7" + +config MAX_CPUS + int + default 8 + +config DEVICETREE + string + default "devicetree.cb" + +config PRERAM_CBMEM_CONSOLE_SIZE + hex + default 0xd00 + +config DIMM_SPD_SIZE + int + default 512 #DDR4 + +# This is overridden if CMOS is used for configuration values. +config MAINBOARD_POWER_ON_AFTER_POWER_FAIL + bool + default n + +endif diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig.name b/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig.name new file mode 100644 index 0000000..a0ff2d5 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_GIGABYTE_Z170X_GAMING_7 + bool "GA-Z170X-Gaming 7" diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/Makefile.inc b/src/mainboard/gigabyte/ga-z170x-gaming7/Makefile.inc new file mode 100644 index 0000000..223820e --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/Makefile.inc @@ -0,0 +1,20 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## Copyright (C) 2016 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +ramstage-y += mainboard.c +ramstage-y += ramstage.c +ramstage-y += hda_verb.c +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/dptf.asl b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/dptf.asl new file mode 100644 index 0000000..4453f3b --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/dptf.asl @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 98 +#define DPTF_CPU_CRITICAL 125 +#define DPTF_CPU_ACTIVE_AC0 91 +#define DPTF_CPU_ACTIVE_AC1 85 +#define DPTF_CPU_ACTIVE_AC2 83 +#define DPTF_CPU_ACTIVE_AC3 80 +#define DPTF_CPU_ACTIVE_AC4 75 + +Name (DTRT, Package () { + /* CPU Throttle Effect on CPU */ + Package () { \_SB.PCI0.B0D4, \_SB.PCI0.B0D4, 100, 50, 0, 0, 0, 0 }, + +}) + +Name (MPPC, Package () +{ + 0x2, /* Revision */ + Package () { /* Power Limit 1 */ + 0, /* PowerLimitIndex, 0 for Power Limit 1 */ + 10000, /* PowerLimitMinimum */ + 31000, /* PowerLimitMaximum */ + 28000, /* TimeWindowMinimum */ + 28000, /* TimeWindowMaximum */ + 100 /* StepSize */ + }, + Package () { /* Power Limit 2 */ + 1, /* PowerLimitIndex, 1 for Power Limit 2 */ + 15000, /* PowerLimitMinimum */ + 65000, /* PowerLimitMaximum */ + 28000, /* TimeWindowMinimum */ + 28000, /* TimeWindowMaximum */ + 100 /* StepSize */ + } +}) + +/* Include DPTF */ +#include <soc/intel/skylake/acpi/dptf/dptf.asl> diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/ec.asl b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/ec.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/ec.asl diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/mainboard.asl b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/mainboard.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/mainboard.asl diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/superio.asl b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/superio.asl new file mode 100644 index 0000000..8b13789 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/superio.asl @@ -0,0 +1 @@ + diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/board_info.txt b/src/mainboard/gigabyte/ga-z170x-gaming7/board_info.txt new file mode 100644 index 0000000..c6b7655 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/board_info.txt @@ -0,0 +1,7 @@ +Category: desktop +Board URL: https://www.gigabyte.com/Motherboard/GA-Z170X-Gaming-7-rev-10 +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y +Release year: 2015 diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.default b/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.default new file mode 100644 index 0000000..3296093 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.default @@ -0,0 +1,4 @@ +boot_option=Fallback +debug_level=Debug +power_on_after_fail=Disable +nmi=Enable diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.layout b/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.layout new file mode 100644 index 0000000..916db62 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.layout @@ -0,0 +1,125 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2016 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +388 4 h 0 reboot_counter +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +#392 3 r 0 unused +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv +#544 440 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +6 0 Emergency +6 1 Alert +6 2 Critical +6 3 Error +6 4 Warning +6 5 Notice +6 6 Info +6 7 Debug +6 8 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/devicetree.cb b/src/mainboard/gigabyte/ga-z170x-gaming7/devicetree.cb new file mode 100644 index 0000000..29fbd71 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/devicetree.cb @@ -0,0 +1,439 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2017 Intel Corporation. +## Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip soc/intel/skylake + + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "0" + register "deep_s5_enable_dc" = "0" + register "deep_sx_config" = "DSX_EN_WAKE_PIN" + + register "eist_enable" = "1" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # Set @0x280-0x2ff I/O Range for SuperIO HWM + register "gen1_dec" = "0x00fc0201" + register "gen2_dec" = "0x007c0a01" + register "gen3_dec" = "0x000c0081" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable DPTF + register "dptf_enable" = "1" + + # FSP Configuration + register "SmbusEnable" = "1" + register "ScsEmmcEnabled" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "0" + register "HeciEnabled" = "0" + register "SkipExtGfxScan" = "0" + register "PrimaryDisplay" = "Display_PEG" + register "Device4Enable" = "1" + register "SaGv" = "SaGv_Enabled" + register "PmTimerDisabled" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "0" + register "PchHdaVcType" = "Vc1" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # Set LPC Serial IRQ mode + register "serirq_mode" = "SERIRQ_CONTINUOUS" + + # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch + # SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s + register "PmConfigSlpS3MinAssert" = "0x02" + + # SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s + register "PmConfigSlpS4MinAssert" = "0x04" + + # SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s + register "PmConfigSlpSusMinAssert" = "0x03" + + # SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s + register "PmConfigSlpAMinAssert" = "0x03" + + # VR Settings Configuration + #+----------------+-------+-------+-------------+-------+ + #| Domain/Setting | SA | IA | GT Unsliced | GT | + #+----------------+-------+-------+-------------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax* | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------------+-------+ + # * - is set automatically in the vr_config.c + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), \ + .psi2threshold = VR_CFG_AMP(4), \ + .psi3threshold = VR_CFG_AMP(1), \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 1520 \ + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), \ + .psi2threshold = VR_CFG_AMP(5), \ + .psi3threshold = VR_CFG_AMP(1), \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 1520 \ + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), \ + .psi2threshold = VR_CFG_AMP(5), \ + .psi3threshold = VR_CFG_AMP(1), \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0 ,\ + .voltage_limit = 1520 \ + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), \ + .psi2threshold = VR_CFG_AMP(5), \ + .psi3threshold = VR_CFG_AMP(1), \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 1520 \ + }" + + register "EnableLan" = "1" + register "PmTimerDisabled" = "0" + + # USB + register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[2]" = "USB2_PORT_MID(OC4)" + register "usb2_ports[3]" = "USB2_PORT_MID(OC4)" + register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" + register "usb2_ports[5]" = "USB2_PORT_MID(OC2)" + register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[8]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[9]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[10]" = "USB2_PORT_MID(OC1)" + register "usb2_ports[11]" = "USB2_PORT_MID(OC1)" + register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)" + register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)" + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)" + register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)" + + # SATA + register "EnableSata" = "1" + register "SataSalpSupport" = "1" + register "SataPortsEnable" = "{ \ + [0] = 1, \ + [1] = 1, \ + [2] = 1, \ + [3] = 1, \ + [4] = 0, \ + [5] = 0, \ + }" + # SATA4 and SATA5 are located in the lower right corner + # of the board, but there is no connector for this + + # PCH UART, SPI, I2C + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart0] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart2] = PchSerialIoDisabled, \ + }" + + # Set params for PEG 0:1:0 + register "Peg0MaxLinkWidth" = "Peg0_x16" + # Configure PCIe clockgen in PCH + # PEG0 uses SRCCLKREQ0 and CLKSRC0 + register "PcieRpClkReqSupport[0]" = "1" + register "PcieRpClkReqNumber[0]" = "0" + register "PcieRpClkSrcNumber[0]" = "0" + + # Enable Root port 6(x1) for LAN. + register "PcieRpEnable[5]" = "1" + # Disable CLKREQ#, since onboard LAN is always present + register "PcieRpClkReqSupport[5]" = "0" + # Enable Advanced Error Reporting + register "PcieRpAdvancedErrorReporting[5]" = "1" + # Enable Latency Tolerance Reporting Mechanism + register "PcieRpLtrEnable[5]" = "1" + # Use CLK SRC 1 + register "PcieRpClkSrcNumber[5]" = "1" + + # Enable Root port 5 (x1) for PCIE slot. + register "PcieRpEnable[4]" = "1" + # Enable CLKREQ# + register "PcieRpClkReqSupport[4]" = "1" + # Use SRCCLKREQ2# + register "PcieRpClkReqNumber[4]" = "2" + # Enable Advanced Error Reporting + register "PcieRpAdvancedErrorReporting[4]" = "1" + # Enable Latency Tolerance Reporting Mechanism + register "PcieRpLtrEnable[4]" = "1" + # Use CLK SRC 2 + register "PcieRpClkSrcNumber[4]" = "2" + # Use Hot Plug subsystem + register "PcieRpHotPlug[4]" = "1" + + # Enable Root port 7(x1) for PCIE slot. + register "PcieRpEnable[6]" = "1" + # Enable CLKREQ# + register "PcieRpClkReqSupport[6]" = "1" + # Use SRCCLKREQ3# + register "PcieRpClkReqNumber[6]" = "3" + # Enable Advanced Error Reporting + register "PcieRpAdvancedErrorReporting[6]" = "1" + # Enable Latency Tolerance Reporting Mechanism + register "PcieRpLtrEnable[6]" = "1" + # Use CLK SRC 3 + register "PcieRpClkSrcNumber[6]" = "3" + # Use Hot Plug subsystem + register "PcieRpHotPlug[6]" = "1" + + # PL2 override 95W + register "tdp_pl2_override" = "95" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on # Host Bridge + subsystemid 0x1849 0x191f + end + device pci 01.0 on # PEG + subsystemid 0x1849 0x1901 + end + device pci 02.0 on # Integrated Graphics Device + subsystemid 0x1849 0x1912 + end + device pci 14.0 on # USB xHCI + subsystemid 0x1849 0xa131 + end + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 off # Thermal Subsystem + #subsystemid 0x1849 0xa131 + end + device pci 15.0 off end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x1849 0xa131 + end + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on # SATA + subsystemid 0x1b21 0x0612 + end + device pci 19.0 off end # UART #2 + device pci 19.1 off end # I2C #5 + device pci 19.2 off end # I2C #4 + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 on end # PCI Express Port 2 + device pci 1c.2 on # Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller + subsystemid 0x1969 0xe0a1 + off + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 on end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 off end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1e.4 off end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 off end # SDCard + device pci 1f.0 on # LPC bridge + subsystemid 0x1849 0x1a43 + + chip superio/common + device pnp 2e.0 on # passes SIO base addr to SSDT gen + + chip superio/nuvoton/nct6791d + device pnp 2e.1 on + # Global Control Registers + # Device IRQ Polarity + irq 0x13 = 0x00 + irq 0x14 = 0x00 + # Global Option + irq 0x24 = 0xfb + irq 0x27 = 0x10 + # Multi Function + irq 0x1a = 0xb0 + irq 0x1b = 0xe6 + irq 0x2a = 0x04 + irq 0x2c = 0x40 + irq 0x2d = 0x03 + + # Parallel Port + io 0x60 = 0x0378 + irq 0x70 = 7 + drq 0x74 = 4 # No DMA + irq 0xf0 = 0x3c # Printer mode + end + device pnp 2e.2 on # UART A + io 0x60 = 0x03f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # IR + io 0x60 = 0x02f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 KBC + io 0x60 = 0x0060 + io 0x62 = 0x0064 + irq 0x70 = 1 # Keyboard + irq 0x72 = 12 # Mouse + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 on # GPIO6 + irq 0xf6 = 0xff + irq 0xf7 = 0xff + irq 0xf8 = 0xff + end + device pnp 2e.107 on # GPIO7 + irq 0xe0 = 0x7f + irq 0xe1 = 0x0d + end + device pnp 2e.207 on # GPIO8 + irq 0xe6 = 0xff + irq 0xe7 = 0xff + irq 0xed = 0xff + end + device pnp 2e.8 off end # WDT + device pnp 2e.108 on end # GPIO0 + device pnp 2e.308 off end # GPIO base + device pnp 2e.408 off end # WDTMEM + device pnp 2e.708 on end # GPIO1 + device pnp 2e.9 on end # GPIO2 + device pnp 2e.109 on # GPIO3 + irq 0xe4 = 0x7b + irq 0xe5 = 0x02 + irq 0xea = 0x04 + end + device pnp 2e.209 on # GPIO4 + irq 0xf0 = 0x7f + irq 0xf1 = 0x80 + end + device pnp 2e.309 on # GPIO5 + irq 0xf4 = 0xdf + irq 0xf5 = 0xd5 + end + device pnp 2e.a on + # Power RAM in S3 and let the PCH + # handle power failure actions + irq 0xe4 = 0x70 + # Set HWM reset source to LRESET# + irq 0xe7 = 0x01 + end # ACPI + device pnp 2e.b on # HWM, LED + io 0x60 = 0x0290 + io 0x62 = 0 + irq 0x70 = 0 + end + device pnp 2e.d off end # BCLK, WDT2, WDT_MEM + device pnp 2e.e off end # CIR wake-up + device pnp 2e.f off end # GPIO PP/OD + device pnp 2e.14 off end # SVID, Port 80 UART + device pnp 2e.16 off end # DS5 + device pnp 2e.116 off end # DS3 + device pnp 2e.316 on end # PCHDSW + device pnp 2e.416 off end # DSWWOPT + device pnp 2e.516 on end # DS3OPT + device pnp 2e.616 on end # DSDSS + device pnp 2e.716 off end # DSPU + end # chip superio/nuvoton/nct6791d + + end # device pnp 2e.0 + end # chip superio/common + + chip drivers/pc80/tpm + device pnp 4e.0 on end # TPM module + end + end # LPC Interface + device pci 1f.1 off end + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 on end # GbE + end +end diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/dsdt.asl b/src/mainboard/gigabyte/ga-z170x-gaming7/dsdt.asl new file mode 100644 index 0000000..1f3537e --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/dsdt.asl @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2016 Intel Corporation + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 // OEM revision +) +{ + #include <soc/intel/skylake/acpi/platform.asl> + + // global NVS and variables + #include <soc/intel/skylake/acpi/globalnvs.asl> + + // CPU + #include <cpu/intel/common/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + /* Image processing unit */ + #include <soc/intel/skylake/acpi/ipu.asl> + #include <soc/intel/skylake/acpi/systemagent.asl> + #include <soc/intel/skylake/acpi/pch.asl> + } + + // Dynamic Platform Thermal Framework + #include "acpi/dptf.asl" + } + + #include <southbridge/intel/common/acpi/sleepstates.asl> + + // Mainboard specific + #include "acpi/mainboard.asl" +} diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/gma-mainboard.ads b/src/mainboard/gigabyte/ga-z170x-gaming7/gma-mainboard.ads new file mode 100644 index 0000000..86a3a62 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/gma-mainboard.ads @@ -0,0 +1,32 @@ +-- +-- This file is part of the coreboot project. +-- +-- Copyright (C) 2018 Tristan Corrick <tristan(a)corrick.kiwi> +-- Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> +-- +-- This program is free software: you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation, either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (HDMI1, -- mainboard DVI port + HDMI3, -- mainboard HDMI port + Analog, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/gpio.h b/src/mainboard/gigabyte/ga-z170x-gaming7/gpio.h new file mode 100644 index 0000000..8417dee --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/gpio.h @@ -0,0 +1,235 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2020 Christoph Pomaska + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include <soc/gpe.h> +#include <soc/gpio.h> + +#ifndef __ACPI__ + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { + PAD_CFG_NF(GPD0, NONE, PWROK, NF1), + PAD_CFG_TERM_GPO(GPD1, 0, NONE, PWROK), + _PAD_CFG_STRUCT(GPD2, 0x00080500, 0x3c00), + PAD_CFG_NF(GPD3, UP_20K, PWROK, NF1), + PAD_CFG_NF(GPD4, NONE, PWROK, NF1), + PAD_CFG_NF(GPD5, NONE, PWROK, NF1), + PAD_CFG_NF(GPD6, NONE, PWROK, NF1), + PAD_CFG_TERM_GPO(GPD7, 1, NONE, PWROK), + PAD_CFG_NF(GPD8, NONE, PWROK, NF1), + PAD_CFG_NF(GPD9, NONE, PWROK, NF1), + PAD_CFG_NF(GPD10, NONE, PWROK, NF1), + PAD_CFG_NF(GPD11, NONE, PWROK, NF1), + PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A1, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_A2, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_A3, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_A4, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A8, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_A9, DN_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A10, DN_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_A11, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A12, NONE, DEEP, NF3), + PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A15, UP_20K, DEEP, NF1), + PAD_NC(GPP_A16, NONE), + PAD_NC(GPP_A17, NONE), + PAD_CFG_NF(GPP_A18, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_A19, NONE, PLTRST, NF1), + PAD_NC(GPP_A20, NONE), + PAD_CFG_TERM_GPO(GPP_A21, 1, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_A22, 1, NONE, DEEP), + _PAD_CFG_STRUCT(GPP_A23, 0x40100100, 0x0000), + PAD_CFG_TERM_GPO(GPP_B0, 0, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_B1, 0, NONE, DEEP), + PAD_NC(GPP_B2, NONE), + PAD_NC(GPP_B3, NONE), + PAD_CFG_TERM_GPO(GPP_B4, 0, NONE, PLTRST), + PAD_NC(GPP_B5, NONE), + PAD_NC(GPP_B6, NONE), + PAD_NC(GPP_B7, NONE), + PAD_NC(GPP_B8, NONE), + PAD_NC(GPP_B9, NONE), + PAD_NC(GPP_B10, NONE), + PAD_CFG_TERM_GPO(GPP_B11, 0, NONE, DEEP), + PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B14, DN_20K, PLTRST, NF1), + PAD_CFG_TERM_GPO(GPP_B15, 0, NONE, PLTRST), + PAD_NC(GPP_B16, NONE), + PAD_CFG_TERM_GPO(GPP_B17, 1, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_B18, 0, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_B19, 0, NONE, PLTRST), + PAD_CFG_NF(GPP_B20, DN_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_B21, DN_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_B22, DN_20K, PLTRST, NF1), + _PAD_CFG_STRUCT(GPP_B23, 0x84000a01, 0x1000), + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_C2, 1, NONE, DEEP), + PAD_CFG_NF(GPP_C3, DN_20K, DEEP, NF1), + PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_C5, 0, NONE, DEEP), + _PAD_CFG_STRUCT(GPP_C6, 0xfffffffd, 0xffffff00), + _PAD_CFG_STRUCT(GPP_C7, 0xfffffffd, 0xffffff00), + PAD_NC(GPP_C8, NONE), + PAD_NC(GPP_C9, NONE), + PAD_NC(GPP_C10, NONE), + PAD_NC(GPP_C11, NONE), + PAD_NC(GPP_C12, NONE), + PAD_NC(GPP_C13, NONE), + PAD_NC(GPP_C14, NONE), + PAD_NC(GPP_C15, NONE), + PAD_NC(GPP_C16, NONE), + PAD_NC(GPP_C17, NONE), + PAD_NC(GPP_C18, NONE), + PAD_CFG_TERM_GPO(GPP_C19, 0, NONE, PWROK), + PAD_CFG_TERM_GPO(GPP_C20, 0, NONE, PWROK), + PAD_CFG_TERM_GPO(GPP_C21, 0, NONE, PWROK), + _PAD_CFG_STRUCT(GPP_C22, 0x42840101, 0x0000), + PAD_NC(GPP_C23, NONE), + PAD_CFG_TERM_GPO(GPP_D0, 0, NONE, PWROK), + PAD_CFG_TERM_GPO(GPP_D1, 1, NONE, PWROK), + PAD_CFG_TERM_GPO(GPP_D2, 0, NONE, PWROK), + _PAD_CFG_STRUCT(GPP_D3, 0x82880101, 0x1000), + _PAD_CFG_STRUCT(GPP_D4, 0x42840101, 0x0000), + PAD_CFG_NF(GPP_D5, NONE, PLTRST, NF1), + PAD_CFG_TERM_GPO(GPP_D6, 0, NONE, PLTRST), + PAD_CFG_NF(GPP_D7, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_D8, NONE, PLTRST, NF1), + PAD_CFG_TERM_GPO(GPP_D9, 0, NONE, PWROK), + PAD_NC(GPP_D10, NONE), + PAD_NC(GPP_D11, NONE), + PAD_NC(GPP_D12, NONE), + PAD_NC(GPP_D13, NONE), + PAD_NC(GPP_D14, NONE), + PAD_NC(GPP_D15, NONE), + PAD_NC(GPP_D16, NONE), + PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D18, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D21, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_D22, NONE, PLTRST, NF1), + PAD_NC(GPP_D23, NONE), + PAD_CFG_NF(GPP_E0, UP_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_E1, UP_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_E2, UP_20K, PLTRST, NF1), + PAD_NC(GPP_E3, NONE), + PAD_NC(GPP_E4, NONE), + _PAD_CFG_STRUCT(GPP_E5, 0x04000601, 0x0000), + PAD_CFG_NF(GPP_E6, NONE, PWROK, NF1), + PAD_NC(GPP_E7, NONE), + PAD_CFG_NF(GPP_E8, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F0, UP_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_F1, UP_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_F2, UP_20K, PLTRST, NF1), + PAD_NC(GPP_F3, NONE), + PAD_NC(GPP_F4, NONE), + PAD_CFG_TERM_GPO(GPP_F5, 1, NONE, PLTRST), + PAD_CFG_NF(GPP_F6, NONE, PWROK, NF1), + PAD_NC(GPP_F7, NONE), + PAD_NC(GPP_F8, NONE), + PAD_NC(GPP_F9, NONE), + PAD_CFG_GPI(GPP_F10, NONE, PLTRST), + PAD_NC(GPP_F11, NONE), + _PAD_CFG_STRUCT(GPP_F12, 0x80900100, 0x0000), + _PAD_CFG_STRUCT(GPP_F13, 0x80100100, 0x0000), + _PAD_CFG_STRUCT(GPP_F14, 0x40900100, 0x0000), + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + PAD_NC(GPP_F17, NONE), + PAD_CFG_TERM_GPO(GPP_F18, 1, NONE, PLTRST), + PAD_CFG_NF(GPP_F19, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_F20, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_F21, NONE, PLTRST, NF1), + PAD_CFG_TERM_GPO(GPP_F22, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_F23, 1, NONE, PLTRST), + _PAD_CFG_STRUCT(GPP_G0, 0x84000101, 0x0000), + _PAD_CFG_STRUCT(GPP_G1, 0x84000101, 0x0000), + PAD_CFG_TERM_GPO(GPP_G2, 1, NONE, PLTRST), + PAD_NC(GPP_G3, NONE), + PAD_NC(GPP_G4, NONE), + PAD_CFG_TERM_GPO(GPP_G5, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G6, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G7, 1, NONE, DEEP), + PAD_CFG_NF(GPP_G8, NONE, DEEP, NF1), + PAD_CFG_GPI(GPP_G9, NONE, PLTRST), + PAD_CFG_GPI(GPP_G10, NONE, PLTRST), + PAD_CFG_NF(GPP_G11, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_G12, 1, NONE, PLTRST), + PAD_NC(GPP_G13, NONE), + PAD_CFG_TERM_GPO(GPP_G14, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G15, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G16, 0, DN_20K, PLTRST), + PAD_NC(GPP_G17, NONE), + PAD_CFG_TERM_GPO(GPP_G18, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G19, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G20, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G21, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G22, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G23, 1, NONE, PLTRST), + PAD_NC(GPP_H0, NONE), + PAD_NC(GPP_H1, NONE), + PAD_NC(GPP_H2, NONE), + PAD_NC(GPP_H3, NONE), + PAD_NC(GPP_H4, NONE), + PAD_NC(GPP_H5, NONE), + PAD_NC(GPP_H6, NONE), + PAD_NC(GPP_H7, NONE), + PAD_NC(GPP_H8, NONE), + PAD_NC(GPP_H9, NONE), + PAD_NC(GPP_H10, NONE), + PAD_NC(GPP_H11, NONE), + PAD_CFG_TERM_GPO(GPP_H12, 0, NONE, DEEP), + _PAD_CFG_STRUCT(GPP_H13, 0x80100100, 0x0000), + _PAD_CFG_STRUCT(GPP_H14, 0x80100100, 0x0000), + _PAD_CFG_STRUCT(GPP_H15, 0x80100100, 0x0000), + PAD_CFG_TERM_GPO(GPP_H16, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_H17, 1, NONE, PLTRST), + PAD_NC(GPP_H18, NONE), + PAD_CFG_NF(GPP_H19, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_H20, NONE, PLTRST, NF1), + PAD_NC(GPP_H21, NONE), + PAD_NC(GPP_H22, NONE), + PAD_CFG_TERM_GPO(GPP_H23, 0, NONE, DEEP), + PAD_CFG_NF(GPP_I0, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I1, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I2, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I3, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I4, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I5, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I6, DN_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_I7, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I8, DN_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_I9, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I10, DN_20K, PLTRST, NF1), +}; + +#endif + +#endif + diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/hda_verb.c b/src/mainboard/gigabyte/ga-z170x-gaming7/hda_verb.c new file mode 100644 index 0000000..940c8fb --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/hda_verb.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Christoph Pomaska + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef HDA_VERB_H +#define HDA_VERB_H + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* Creative, Recon3Di */ + 0x11020011, /* Vendor ID */ + 0x1458a036, /* Subsystem ID */ + 11, /* Number of entries */ + AZALIA_SUBVENDOR(0, 0x1458a036), + AZALIA_PIN_CFG(0, 0x0b, 0x01014010), + AZALIA_PIN_CFG(0, 0x0c, 0x014580f0), + AZALIA_PIN_CFG(0, 0x0d, 0x014570f0), + AZALIA_PIN_CFG(0, 0x0e, 0x01c530f0), + AZALIA_PIN_CFG(0, 0x0f, 0x0221401f), + AZALIA_PIN_CFG(0, 0x10, 0x02216011), + AZALIA_PIN_CFG(0, 0x11, 0x02012014), + AZALIA_PIN_CFG(0, 0x12, 0x37a791f0), + AZALIA_PIN_CFG(0, 0x13, 0x908700f0), + AZALIA_PIN_CFG(0, 0x18, 0x500000f0), + /* Intel, SkylakeHDMI */ + 0x80862809, /* Vendor ID */ + 0x80860101, /* Subsystem ID */ + 4, /* Number of entries */ + AZALIA_SUBVENDOR(2, 0x80860101), + AZALIA_PIN_CFG(2, 0x05, 0x18560010), + AZALIA_PIN_CFG(2, 0x06, 0x18560010), + AZALIA_PIN_CFG(2, 0x07, 0x18560010), +}; + +const u32 pc_beep_verbs[] = {}; + +AZALIA_ARRAY_SIZES; + +#endif diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/include/gpio.h b/src/mainboard/gigabyte/ga-z170x-gaming7/include/gpio.h new file mode 100644 index 0000000..0b33078 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/include/gpio.h @@ -0,0 +1,508 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef _PCH_GPIO_H +#define _PCH_GPIO_H + +#include <soc/gpe.h> +#include <soc/gpio.h> + +/* Pad configuration in ramstage */ +static const struct pad_config gpio_table[] = { + /* ------- GPIO Group GPP_A ------- */ + /* GPP_A0 - RCIN# */ + PAD_CFG_NF_BUF_TRIG(GPP_A0, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_A1 - LAD0 */ + PAD_CFG_NF_BUF_TRIG(GPP_A1, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A2 - LAD1 */ + PAD_CFG_NF_BUF_TRIG(GPP_A2, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A3 - LAD2 */ + PAD_CFG_NF_BUF_TRIG(GPP_A3, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A4 - LAD3 */ + PAD_CFG_NF_BUF_TRIG(GPP_A4, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A5 - LFRAME# */ + PAD_CFG_NF_BUF_TRIG(GPP_A5, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_A6 - SERIRQ */ + PAD_CFG_NF_BUF_TRIG(GPP_A6, NONE, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A7 - GPIO */ + PAD_CFG_GPI_INT(GPP_A7, NONE, PLTRST, OFF), + /* GPP_A8 - CLKRUN# */ + PAD_CFG_NF_BUF_TRIG(GPP_A8, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_A9 - CLKOUT_LPC0 */ + PAD_CFG_NF_BUF_TRIG(GPP_A9, 20K_PD, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_A10 - CLKOUT_LPC1 */ + PAD_CFG_NF_BUF_TRIG(GPP_A10, 20K_PD, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_A11 - GPIO */ + PAD_CFG_GPI_INT(GPP_A11, NONE, PLTRST, OFF), + /* GPP_A12 - GPIO */ + PAD_CFG_GPI_INT(GPP_A12, NONE, PLTRST, OFF), + /* GPP_A13 - SUSWARN#/SUSPWRDNACK */ + PAD_CFG_NF_BUF_TRIG(GPP_A13, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_A14 - SUS_STAT# */ + PAD_CFG_NF_BUF_TRIG(GPP_A14, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_A15 - SUS_ACK# */ + PAD_CFG_NF_BUF_TRIG(GPP_A15, 20K_PU, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_A16 - GPIO */ + PAD_CFG_GPI_INT(GPP_A16, NONE, PLTRST, OFF), + /* GPP_A17 - GPIO */ + PAD_CFG_GPI_INT(GPP_A17, NONE, PLTRST, OFF), + /* GPP_A18 - GPIO */ + PAD_CFG_GPI_INT(GPP_A18, NONE, PLTRST, OFF), + /* GPP_A19 - GPIO */ + PAD_CFG_GPI_INT(GPP_A19, NONE, PLTRST, OFF), + /* GPP_A20 - GPIO */ + PAD_CFG_GPI_INT(GPP_A20, NONE, PLTRST, OFF), + /* GPP_A21 - GPIO */ + PAD_CFG_GPI_INT(GPP_A21, NONE, PLTRST, OFF), + /* GPP_A22 - GPIO */ + PAD_CFG_GPI_INT(GPP_A22, NONE, PLTRST, OFF), + /* GPP_A23 - GPIO */ + PAD_CFG_GPI_INT(GPP_A23, NONE, PLTRST, OFF), + + /* ------- GPIO Group GPP_B ------- */ + /* GPP_B0 - GPIO */ + PAD_CFG_GPI_INT(GPP_B0, NONE, PLTRST, OFF), + /* GPP_B1 - GPIO */ + PAD_CFG_GPI_INT(GPP_B1, NONE, PLTRST, OFF), + /* GPP_B2 - GPIO */ + PAD_CFG_GPI_INT(GPP_B2, NONE, PLTRST, OFF), + /* GPP_B3 - GPIO */ + PAD_CFG_GPO(GPP_B3, 1, DEEP), + /* GPP_B4 - CPU_GP3 */ + PAD_CFG_NF_BUF_TRIG(GPP_B4, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_B5 - GPIO */ + PAD_CFG_GPI_INT(GPP_B5, NONE, PLTRST, OFF), + /* GPP_B6 - GPIO */ + PAD_CFG_GPI_INT(GPP_B6, NONE, PLTRST, OFF), + /* GPP_B7 - NC */ + PAD_NC(GPP_B7, NONE), + /* GPP_B8 - GPIO */ + PAD_CFG_GPI_INT(GPP_B8, 5K_PU, PLTRST, OFF), + /* GPP_B9 - GPIO */ + PAD_CFG_GPI_INT(GPP_B9, NONE, PLTRST, OFF), + /* GPP_B10 - GPIO */ + PAD_CFG_GPI_INT(GPP_B10, NONE, PLTRST, OFF), + /* GPP_B11 - GPIO */ + _PAD_CFG_STRUCT(GPP_B11, + PAD_FUNC(GPIO) | PAD_RESET(PWROK) | + PAD_CFG0_TRIG_OFF | PAD_CFG0_RX_POL_NONE | + PAD_BUF(NO_DISABLE), + PAD_PULL(NONE)), + /* GPP_B12 - SLP_S0# */ + PAD_CFG_NF_BUF_TRIG(GPP_B12, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_B13 - PLTRST# */ + PAD_CFG_NF_BUF_TRIG(GPP_B13, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_B14 - SPKR */ + PAD_CFG_NF_BUF_TRIG(GPP_B14, 20K_PD, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_B15 - GPIO */ + PAD_CFG_GPI_INT(GPP_B15, NONE, PLTRST, OFF), + /* GPP_B16 - GPIO */ + PAD_CFG_GPI_INT(GPP_B16, NONE, PLTRST, OFF), + /* GPP_B17 - GPIO */ + PAD_CFG_GPO(GPP_B17, 1, DEEP), + /* GPP_B18 - GPIO */ + PAD_CFG_GPI_INT(GPP_B18, NONE, PLTRST, OFF), + /* GPP_B19 - GPIO */ + PAD_CFG_GPI_INT(GPP_B19, NONE, PLTRST, OFF), + /* GPP_B20 - GPIO */ + PAD_CFG_GPI_INT(GPP_B20, NONE, PLTRST, OFF), + /* GPP_B21 - GPIO */ + PAD_CFG_GPI_INT(GPP_B21, NONE, PLTRST, OFF), + /* GPP_B22 - GPIO */ + PAD_CFG_GPI_INT(GPP_B22, NONE, PLTRST, OFF), + /* GPP_B23 - PCHHOT# */ + _PAD_CFG_STRUCT(GPP_B23, + PAD_FUNC(NF2) | PAD_RESET(PLTRST) | + PAD_CFG0_TRIG_OFF | PAD_CFG0_RX_POL_NONE | + PAD_BUF(RX_DISABLE) | 1, + PAD_PULL(20K_PD)), + + /* ------- GPIO Group GPP_C ------- */ + /* GPP_C0 - SMBCLK */ + PAD_CFG_NF_BUF_TRIG(GPP_C0, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_C1 - SMBDATA */ + PAD_CFG_NF_BUF_TRIG(GPP_C1, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_C2 - GPIO */ + PAD_CFG_GPO(GPP_C2, 1, DEEP), + /* GPP_C3 - SML0CLK */ + PAD_CFG_NF_BUF_TRIG(GPP_C3, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_C4 - SML0DATA */ + PAD_CFG_NF_BUF_TRIG(GPP_C4, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_C5 - GPIO */ + PAD_CFG_GPI_INT(GPP_C5, NONE, PLTRST, OFF), + /* GPP_C6 - RESERVED */ + /* GPP_C7 - RESERVED */ + /* GPP_C8 - UART0_RXD */ + PAD_CFG_NF_BUF_TRIG(GPP_C8, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_C9 - UART0_TXD */ + PAD_CFG_NF_BUF_TRIG(GPP_C9, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_C10 - UART0_RTS# */ + PAD_CFG_NF_BUF_TRIG(GPP_C10, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_C11 - UART0_CTS# */ + PAD_CFG_NF_BUF_TRIG(GPP_C11, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_C12 - GPIO */ + PAD_CFG_GPI_INT(GPP_C12, NONE, PLTRST, OFF), + /* GPP_C13 - GPIO */ + PAD_CFG_GPI_INT(GPP_C13, NONE, PLTRST, OFF), + /* GPP_C14 - GPIO */ + PAD_CFG_GPI_INT(GPP_C14, NONE, PLTRST, OFF), + /* GPP_C15 - GPIO */ + PAD_CFG_GPI_INT(GPP_C15, NONE, PLTRST, OFF), + /* GPP_C16 - GPIO */ + PAD_CFG_GPI_INT(GPP_C16, NONE, PLTRST, OFF), + /* GPP_C17 - GPIO */ + PAD_CFG_GPI_INT(GPP_C17, NONE, PLTRST, OFF), + /* GPP_C18 - GPIO */ + PAD_CFG_GPI_INT(GPP_C18, NONE, PLTRST, OFF), + /* GPP_C19 - GPIO */ + PAD_CFG_GPI_INT(GPP_C19, NONE, PLTRST, OFF), + /* GPP_C20 - UART2_RXD */ + PAD_CFG_NF_BUF_TRIG(GPP_C20, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_C21 - UART2_TXD */ + PAD_CFG_NF_BUF_TRIG(GPP_C21, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_C22 - UART2_RTS# */ + PAD_CFG_NF_BUF_TRIG(GPP_C22, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_C23 - GPIO */ + PAD_CFG_GPI_SCI(GPP_C23, NONE, DEEP, LEVEL, YES), + + /* ------- GPIO Group GPP_D ------- */ + /* GPP_D0 - GPIO */ + PAD_CFG_GPI_INT(GPP_D0, NONE, PLTRST, OFF), + /* GPP_D1 - GPIO */ + PAD_CFG_GPI_INT(GPP_D1, NONE, PLTRST, OFF), + /* GPP_D2 - GPIO */ + PAD_CFG_GPI_INT(GPP_D2, NONE, PLTRST, OFF), + /* GPP_D3 - GPIO */ + PAD_CFG_GPI_INT(GPP_D3, NONE, PLTRST, OFF), + /* GPP_D4 - GPIO */ + PAD_CFG_GPI_INT(GPP_D4, NONE, PLTRST, OFF), + /* GPP_D5 - I2S_SFRM */ + PAD_CFG_NF_BUF_TRIG(GPP_D5, NONE, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_D6 - I2S_TXD */ + PAD_CFG_NF_BUF_TRIG(GPP_D6, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_D7 - I2S_RXD */ + PAD_CFG_NF_BUF_TRIG(GPP_D7, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_D8 - I2S_SCLK */ + PAD_CFG_NF_BUF_TRIG(GPP_D8, NONE, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_D9 - GPIO */ + PAD_CFG_GPI_INT(GPP_D9, NONE, PLTRST, OFF), + /* GPP_D10 - GPIO */ + PAD_CFG_GPI_INT(GPP_D10, NONE, PLTRST, OFF), + /* GPP_D11 - GPIO */ + PAD_CFG_GPI_INT(GPP_D11, NONE, PLTRST, OFF), + /* GPP_D12 - GPIO */ + PAD_CFG_GPI_INT(GPP_D12, NONE, PLTRST, OFF), + /* GPP_D13 - GPIO */ + PAD_CFG_GPI_INT(GPP_D13, NONE, PLTRST, OFF), + /* GPP_D14 - GPIO */ + PAD_CFG_GPI_INT(GPP_D14, NONE, PLTRST, OFF), + /* GPP_D15 - GPIO */ + PAD_CFG_GPI_INT(GPP_D15, NONE, PLTRST, OFF), + /* GPP_D16 - GPIO */ + PAD_CFG_GPI_INT(GPP_D16, NONE, PLTRST, OFF), + /* GPP_D17 - GPIO */ + PAD_CFG_GPI_INT(GPP_D17, NONE, PLTRST, OFF), + /* GPP_D18 - GPIO */ + PAD_CFG_GPI_INT(GPP_D18, NONE, PLTRST, OFF), + /* GPP_D19 - DMIC_CLK0 */ + PAD_CFG_NF_BUF_TRIG(GPP_D19, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_D20 - DMIC_DATA0 */ + PAD_CFG_NF_BUF_TRIG(GPP_D20, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_D21 - GPIO */ + PAD_CFG_GPI_INT(GPP_D21, NONE, PLTRST, OFF), + /* GPP_D22 - GPIO */ + PAD_CFG_GPI_INT(GPP_D22, NONE, PLTRST, OFF), + /* GPP_D23 - GPIO */ + PAD_CFG_GPI_INT(GPP_D23, NONE, PLTRST, OFF), + + /* ------- GPIO Group GPP_E ------- */ + /* GPP_E0 - SATAXPCIE0 */ + PAD_CFG_NF_BUF_TRIG(GPP_E0, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E1 - SATAXPCIE1 */ + PAD_CFG_NF_BUF_TRIG(GPP_E1, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E2 - SATAXPCIE2 */ + PAD_CFG_NF_BUF_TRIG(GPP_E2, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E3 - CPU_GP0 */ + PAD_CFG_NF_BUF_TRIG(GPP_E3, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E4 - SATA_DEVSLP0 */ + PAD_CFG_NF_BUF_TRIG(GPP_E4, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E5 - SATA_DEVSLP1 */ + PAD_CFG_NF_BUF_TRIG(GPP_E5, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E6 - SATA_DEVSLP2 */ + PAD_CFG_NF_BUF_TRIG(GPP_E6, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E7 - GPIO */ + PAD_CFG_GPI_INT(GPP_E7, NONE, PLTRST, OFF), + /* GPP_E8 - SATA_LED# */ + PAD_CFG_NF_BUF_TRIG(GPP_E8, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_E9 - USB_OC0# */ + PAD_CFG_NF_BUF_TRIG(GPP_E9, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_E10 - USB_OC1# */ + PAD_CFG_NF_BUF_TRIG(GPP_E10, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_E11 - USB_OC2# */ + PAD_CFG_NF_BUF_TRIG(GPP_E11, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_E12 - USB_OC3# */ + PAD_CFG_NF_BUF_TRIG(GPP_E12, NONE, DEEP, NF1, TX_DISABLE, OFF), + + /* ------- GPIO Group GPP_F ------- */ + /* GPP_F0 - GPIO */ + PAD_CFG_GPI_INT(GPP_F0, NONE, PLTRST, OFF), + /* GPP_F1 - SATAXPCIE4 */ + PAD_CFG_NF_BUF_TRIG(GPP_F1, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_F2 - GPIO */ + PAD_NC(GPP_F2, NONE), + /* GPP_F3 - GPIO */ + PAD_CFG_GPI_INT(GPP_F3, NONE, PLTRST, OFF), + /* GPP_F4 - GPIO */ + PAD_CFG_GPI_INT(GPP_F4, NONE, PLTRST, OFF), + /* GPP_F5 - GPIO */ + PAD_CFG_GPI_INT(GPP_F5, NONE, PLTRST, OFF), + /* GPP_F6 - GPIO */ + PAD_CFG_GPI_INT(GPP_F6, NONE, PLTRST, OFF), + /* GPP_F7 - GPIO */ + PAD_CFG_GPI_INT(GPP_F7, NONE, PLTRST, OFF), + /* GPP_F8 - GPIO */ + PAD_CFG_GPI_INT(GPP_F8, NONE, PLTRST, OFF), + /* GPP_F9 - GPIO */ + PAD_CFG_GPI_INT(GPP_F9, NONE, PLTRST, OFF), + /* GPP_F10 - GPIO */ + PAD_CFG_GPI_APIC(GPP_F10, NONE, PLTRST), + /* GPP_F11 - GPIO */ + PAD_CFG_GPI_INT(GPP_F11, NONE, PLTRST, OFF), + /* GPP_F12 - GPIO */ + PAD_CFG_GPI_APIC_INVERT(GPP_F12, NONE, PLTRST), + /* GPP_F13 - GPIO */ + PAD_CFG_GPI_APIC(GPP_F13, NONE, PLTRST), + /* GPP_F14 - GPIO */ + PAD_CFG_GPI_APIC_INVERT(GPP_F14, NONE, DEEP), + /* GPP_F15 - USB_OC4# */ + PAD_CFG_NF_BUF_TRIG(GPP_F15, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_F16 - USB_OC5# */ + PAD_CFG_NF_BUF_TRIG(GPP_F16, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_F17 - USB_OC6# */ + PAD_CFG_NF_BUF_TRIG(GPP_F17, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_F18 - GPIO */ + PAD_CFG_GPO(GPP_F18, 1, PLTRST), + /* GPP_F19 - GPIO */ + PAD_CFG_GPI_INT(GPP_F19, NONE, PLTRST, OFF), + /* GPP_F20 - GPIO */ + PAD_CFG_GPI_INT(GPP_F20, NONE, PLTRST, OFF), + /* GPP_F21 - GPIO */ + PAD_CFG_GPI_INT(GPP_F21, NONE, PLTRST, OFF), + /* GPP_F22 - GPIO */ + PAD_CFG_GPI_INT(GPP_F22, NONE, PLTRST, OFF), + /* GPP_F23 - GPIO */ + PAD_CFG_GPI_INT(GPP_F23, NONE, PLTRST, OFF), + + /* ------- GPIO Group GPP_G ------- */ + /* GPP_G0 - GPIO */ + PAD_CFG_GPI_INT(GPP_G0, NONE, PWROK, OFF), + /* GPP_G1 - GPIO */ + PAD_CFG_GPI_INT(GPP_G1, NONE, PWROK, OFF), + /* GPP_G2 - GPIO */ + PAD_CFG_GPI_INT(GPP_G2, NONE, PWROK, OFF), + /* GPP_G3 - GPIO */ + PAD_CFG_GPI_INT(GPP_G3, NONE, PWROK, OFF), + /* GPP_G4 - GPIO */ + PAD_CFG_GPO(GPP_G4, 0, DEEP), + /* GPP_G5 - GPIO */ + PAD_CFG_GPI_INT(GPP_G5, NONE, PWROK, OFF), + /* GPP_G6 - GPIO */ + _PAD_CFG_STRUCT(GPP_G6, + PAD_FUNC(GPIO) | PAD_RESET(PWROK) | + PAD_CFG0_TRIG_LEVEL | PAD_CFG0_RX_POL_YES | + PAD_BUF(TX_DISABLE), + PAD_PULL(NONE)), + /* GPP_G7 - GPIO */ + PAD_CFG_GPI_INT(GPP_G7, NONE, PWROK, OFF), + /* GPP_G8 - GPIO */ + PAD_CFG_GPI_INT(GPP_G8, NONE, PLTRST, OFF), + /* GPP_G9 - GPIO */ + PAD_CFG_GPI_INT(GPP_G9, NONE, PLTRST, OFF), + /* GPP_G10 - GPIO */ + PAD_CFG_GPI_INT(GPP_G10, NONE, PLTRST, OFF), + /* GPP_G11 - GPIO */ + PAD_CFG_GPI_INT(GPP_G11, NONE, PLTRST, OFF), + /* GPP_G12 - GPIO */ + _PAD_CFG_STRUCT(GPP_G12, + PAD_FUNC(GPIO) | PAD_RESET(PLTRST) | + PAD_CFG0_TRIG_LEVEL | PAD_CFG0_RX_POL_YES | + PAD_BUF(TX_DISABLE), + PAD_PULL(NONE)), + /* GPP_G13 - GPIO */ + PAD_CFG_GPO(GPP_G13, 1, PLTRST), + /* GPP_G14 - GPIO */ + _PAD_CFG_STRUCT(GPP_G14, + PAD_FUNC(GPIO) | PAD_RESET(PLTRST) | + PAD_CFG0_TRIG_LEVEL | PAD_CFG0_RX_POL_YES | + PAD_BUF(TX_DISABLE), + PAD_PULL(NONE)), + /* GPP_G15 - GPIO */ + PAD_CFG_GPO(GPP_G15, 0, PLTRST), + /* GPP_G16 - GPIO */ + PAD_CFG_TERM_GPO(GPP_G16, 1, 20K_PD, PLTRST), + /* GPP_G17 - GPIO */ + PAD_CFG_GPI_INT(GPP_G17, NONE, PLTRST, OFF), + /* GPP_G18 - GPIO */ + PAD_CFG_GPI_APIC(GPP_G18, NONE, PLTRST), + /* GPP_G19 - SMI# */ + PAD_CFG_NF_BUF_TRIG(GPP_G19, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_G20 - GPIO */ + PAD_CFG_GPI_INT(GPP_G20, NONE, PLTRST, OFF), + /* GPP_G21 - GPIO */ + PAD_CFG_GPI_INT(GPP_G21, NONE, PLTRST, OFF), + /* GPP_G22 - GPIO */ + PAD_CFG_GPI_INT(GPP_G22, NONE, PLTRST, OFF), + /* GPP_G23 - GPIO */ + PAD_CFG_GPI_INT(GPP_G23, NONE, PLTRST, OFF), + + /* ------- GPIO Group GPP_H ------- */ + /* GPP_H0 - GPIO */ + PAD_CFG_GPI_INT(GPP_H0, NONE, PLTRST, OFF), + /* GPP_H1 - GPIO */ + PAD_NC(GPP_H1, NONE), + /* GPP_H2 - GPIO */ + PAD_CFG_GPI_INT(GPP_H2, NONE, PLTRST, OFF), + /* GPP_H3 - GPIO */ + PAD_CFG_GPI_INT(GPP_H3, NONE, PLTRST, OFF), + /* GPP_H4 - GPIO */ + PAD_CFG_GPI_INT(GPP_H4, NONE, PLTRST, OFF), + /* GPP_H5 - GPIO */ + PAD_CFG_GPI_INT(GPP_H5, NONE, PLTRST, OFF), + /* GPP_H6 - GPIO */ + PAD_CFG_GPI_INT(GPP_H6, NONE, PLTRST, OFF), + /* GPP_H7 - GPIO */ + PAD_CFG_GPI_INT(GPP_H7, NONE, PLTRST, OFF), + /* GPP_H8 - GPIO */ + PAD_CFG_GPI_INT(GPP_H8, NONE, PLTRST, OFF), + /* GPP_H9 - GPIO */ + PAD_CFG_GPI_INT(GPP_H9, NONE, PLTRST, OFF), + /* GPP_H10 - GPIO */ + PAD_CFG_GPI_INT(GPP_H10, NONE, PLTRST, OFF), + /* GPP_H11 - GPIO */ + PAD_CFG_GPI_INT(GPP_H11, NONE, PLTRST, OFF), + /* GPP_H12 - GPIO */ + PAD_CFG_GPI_INT(GPP_H12, NONE, PLTRST, OFF), + /* GPP_H13 - GPIO */ + PAD_CFG_GPI_APIC(GPP_H13, NONE, PLTRST), + /* GPP_H14 - GPIO */ + PAD_CFG_GPI_APIC(GPP_H14, NONE, PLTRST), + /* GPP_H15 - GPIO */ + PAD_CFG_GPI_APIC(GPP_H15, NONE, PLTRST), + /* GPP_H16 - GPIO */ + PAD_CFG_GPI(GPP_H16, NONE, PLTRST), + /* GPP_H17 - GPIO */ + PAD_CFG_GPO(GPP_H17, 1, PLTRST), + /* GPP_H18 - GPIO */ + PAD_CFG_GPI_INT(GPP_H18, NONE, PLTRST, OFF), + /* GPP_H19 - GPIO */ + PAD_CFG_GPI_INT(GPP_H19, NONE, PLTRST, OFF), + /* GPP_H20 - GPIO */ + PAD_CFG_GPI_INT(GPP_H20, NONE, PLTRST, OFF), + /* GPP_H21 - GPIO */ + PAD_CFG_GPI_INT(GPP_H21, NONE, PLTRST, OFF), + /* GPP_H22 - GPIO */ + PAD_CFG_GPI_INT(GPP_H22, NONE, PLTRST, OFF), + /* GPP_H23 - GPIO */ + PAD_CFG_GPI_INT(GPP_H23, NONE, PWROK, OFF), + + /* -------- GPIO Group GPD -------- */ + /* GPD0 - GPIO */ + PAD_CFG_GPI_INT(GPD0, NONE, PLTRST, OFF), + /* GPD1 - GPIO */ + PAD_CFG_GPO(GPD1, 0, PWROK), + /* GPD2 - LAN_WAKE# */ + PAD_CFG_NF_BUF_TRIG(GPD2, NATIVE, PWROK, NF1, RX_DISABLE, LEVEL), + /* GPD3 - PWRBTN# */ + PAD_CFG_NF_BUF_TRIG(GPD3, 20K_PU, PWROK, NF1, TX_DISABLE, OFF), + /* GPD4 - SLP_S3# */ + PAD_CFG_NF_BUF_TRIG(GPD4, NONE, PWROK, NF1, RX_DISABLE, OFF), + /* GPD5 - SLP_S4# */ + PAD_CFG_NF_BUF_TRIG(GPD5, NONE, PWROK, NF1, RX_DISABLE, OFF), + /* GPD6 - GPIO */ + PAD_CFG_GPI_INT(GPD6, NONE, PLTRST, OFF), + /* GPD7 - GPIO */ + _PAD_CFG_STRUCT(GPD7, + PAD_FUNC(GPIO) | PAD_RESET(PLTRST) | + PAD_CFG0_TRIG_OFF | PAD_CFG0_RX_POL_NONE | + PAD_BUF(TX_DISABLE) | 1, + PAD_PULL(NONE)), + /* GPD8 - SUSCLK */ + PAD_CFG_NF_BUF_TRIG(GPD8, NONE, PWROK, NF1, RX_DISABLE, OFF), + /* GPD9 - SLP_WLAN# */ + PAD_CFG_NF_BUF_TRIG(GPD9, NONE, PWROK, NF1, RX_DISABLE, OFF), + /* GPD10 - SLP_S5# */ + PAD_CFG_NF_BUF_TRIG(GPD10, NONE, PWROK, NF1, RX_DISABLE, OFF), + /* GPD11 - GPIO */ + PAD_CFG_GPO(GPD11, 0, PWROK), + + /* ------- GPIO Group GPP_I ------- */ + /* GPP_I0 - DDPB_HPD0 */ + PAD_CFG_NF_BUF_TRIG(GPP_I0, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I1 - DDPC_HPD1 */ + PAD_CFG_NF_BUF_TRIG(GPP_I1, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I2 - DDPD_HPD2 */ + PAD_CFG_NF_BUF_TRIG(GPP_I2, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I3 - DDPE_HPD3 */ + PAD_CFG_NF_BUF_TRIG(GPP_I3, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I4 - GPIO */ + PAD_CFG_GPI_INT(GPP_I4, NONE, PLTRST, OFF), + /* GPP_I5 - DDPB_CTRLCLK */ + PAD_CFG_NF_BUF_TRIG(GPP_I5, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I6 - DDPB_CTRLDATA */ + PAD_CFG_NF_BUF_TRIG(GPP_I6, 20K_PD, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I7 - DDPC_CTRLCLK */ + PAD_CFG_NF_BUF_TRIG(GPP_I7, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I8 - DDPC_CTRLDATA */ + PAD_CFG_NF_BUF_TRIG(GPP_I8, 20K_PD, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I9 - DDPD_CTRLCLK */ + PAD_CFG_NF_BUF_TRIG(GPP_I9, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I10 - DDPD_CTRLDATA */ + PAD_CFG_NF_BUF_TRIG(GPP_I10, 20K_PD, PLTRST, NF1, TX_DISABLE, OFF), +}; + +/* Early pad configuration in romstage */ +static const struct pad_config early_gpio_table[] = { + /* ------- GPIO Group GPP_A ------- */ + /* GPP_A0 - RCIN# */ + PAD_CFG_NF_BUF_TRIG(GPP_A0, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_A1 - LAD0 */ + PAD_CFG_NF_BUF_TRIG(GPP_A1, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A2 - LAD1 */ + PAD_CFG_NF_BUF_TRIG(GPP_A2, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A3 - LAD2 */ + PAD_CFG_NF_BUF_TRIG(GPP_A3, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A4 - LAD3 */ + PAD_CFG_NF_BUF_TRIG(GPP_A4, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A5 - LFRAME# */ + PAD_CFG_NF_BUF_TRIG(GPP_A5, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_A6 - SERIRQ */ + PAD_CFG_NF_BUF_TRIG(GPP_A6, NONE, PLTRST, NF1, NO_DISABLE, OFF), + + /* GPP_A8 - CLKRUN# */ + PAD_CFG_NF_BUF_TRIG(GPP_A8, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_A9 - CLKOUT_LPC0 */ + PAD_CFG_NF_BUF_TRIG(GPP_A9, 20K_PD, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_A10 - CLKOUT_LPC1 */ + PAD_CFG_NF_BUF_TRIG(GPP_A10, 20K_PD, PLTRST, NF1, RX_DISABLE, OFF), + + /* GPP_A13 - SUSWARN#/SUSPWRDNACK */ + PAD_CFG_NF_BUF_TRIG(GPP_A13, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_A14 - SUS_STAT# */ + PAD_CFG_NF_BUF_TRIG(GPP_A14, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_A15 - SUS_ACK# */ + PAD_CFG_NF_BUF_TRIG(GPP_A15, 20K_PU, DEEP, NF1, TX_DISABLE, OFF), +}; + +#endif diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/mainboard.c b/src/mainboard/gigabyte/ga-z170x-gaming7/mainboard.c new file mode 100644 index 0000000..4c1c6cd --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/mainboard.c @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Tristan Corrick <tristan(a)corrick.kiwi> + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <drivers/intel/gma/int15.h> + +static void mainboard_enable(struct device *dev) +{ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_NONE, + GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/ramstage.c b/src/mainboard/gigabyte/ga-z170x-gaming7/ramstage.c new file mode 100644 index 0000000..a247b72 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/ramstage.c @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corporation + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/ramstage.h> +#include "include/gpio.h" + +void mainboard_silicon_init_params(FSP_SIL_UPD *params) +{ + /* Configure pads prior to SiliconInit() in case there's any + * dependencies during hardware initialization. */ + gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); + + params->CdClock = 3; +} diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/romstage.c b/src/mainboard/gigabyte/ga-z170x-gaming7/romstage.c new file mode 100644 index 0000000..0c0371b --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/romstage.c @@ -0,0 +1,66 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corporation. + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/romstage.h> +#include <string.h> +#include <spd_bin.h> + +static void mainboard_fill_rcomp_res_data(void *rcomp_ptr) +{ + /* Rcomp resistor */ + const u16 RcompResistor[3] = { 200, 81, 162 }; + memcpy(rcomp_ptr, RcompResistor, + sizeof(RcompResistor)); +} + +static void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr) +{ + /* Rcomp target */ + static const u16 RcompTarget[5] = { + 100, 40, 40, 23, 40 }; + memcpy(rcomp_strength_ptr, RcompTarget, sizeof(RcompTarget)); +} + +void mainboard_memory_init_params(FSPM_UPD *mupd) +{ + FSP_M_CONFIG *mem_cfg; + struct spd_block blk = { + .addr_map = { 0x50, 0x51, 0x52, 0x53, }, + }; + + mem_cfg = &mupd->FspmConfig; + mainboard_fill_dq_map_data(&mem_cfg->DqByteMapCh0, + &mem_cfg->DqByteMapCh1); + mainboard_fill_dqs_map_data(&mem_cfg->DqsMapCpu2DramCh0, + &mem_cfg->DqsMapCpu2DramCh1); + mainboard_fill_rcomp_res_data(&mem_cfg->RcompResistor); + mainboard_fill_rcomp_strength_data(&mem_cfg->RcompTarget); + + mem_cfg->DqPinsInterleaved = 1; + get_spd_smbus(&blk); + mem_cfg->MemorySpdDataLen = blk.len; + mem_cfg->MemorySpdPtr00 = (uintptr_t)blk.spd_array[0]; + mem_cfg->MemorySpdPtr10 = (uintptr_t)blk.spd_array[2]; + mem_cfg->MemorySpdPtr01 = (uintptr_t)blk.spd_array[1]; + mem_cfg->MemorySpdPtr11 = (uintptr_t)blk.spd_array[3]; + dump_spd_info(&blk); + + /* use virtual channel 1 for the dmi interface of the PCH */ + mupd->FspmTestConfig.DmiVc1 = 1; + + /* desktop type */ + mem_cfg->UserBd = BOARD_TYPE_DESKTOP; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/38920 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ib2c69bddd22cbd8f797dbb57370a4d8e5afa63bc Gerrit-Change-Number: 38920 Gerrit-PatchSet: 1 Gerrit-Owner: Christoph Pomaska <github(a)slrie.de> Gerrit-MessageType: newchange

6 54

Change in ...coreboot[master]: mb/apple: Add MacBook Pro 8,1 support
by Evgeny Zinoviev (Code Review) 27 Feb '23

27 Feb '23

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33151 Change subject: mb/apple: Add MacBook Pro 8,1 support ...................................................................... mb/apple: Add MacBook Pro 8,1 support MacBook Pro 13'' Early 2011 (A1278). Works: - Graphics initialization (libgfxinit) - GRUB payload - Linux (it boots) Mostly untested for now. This board has SOIC-8 chip, 25Q064A in my case. WARNING: do not just use a clip to flash the chip as usual. There is a capacitor and a resistor right near the VCC pin. They prevent the clip from being properly attached. You can very easily break them. Either cut off some plasic from the clip so that it doesn't touch them, or don't use clip at all. Change-Id: I7a7dc6d6c16751403ce276d2778dc915cd69f3f2 Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- A src/mainboard/apple/macbookpro8_1/Kconfig A src/mainboard/apple/macbookpro8_1/Kconfig.name A src/mainboard/apple/macbookpro8_1/Makefile.inc A src/mainboard/apple/macbookpro8_1/acpi/ec.asl A src/mainboard/apple/macbookpro8_1/acpi/platform.asl A src/mainboard/apple/macbookpro8_1/acpi/superio.asl A src/mainboard/apple/macbookpro8_1/acpi_tables.c A src/mainboard/apple/macbookpro8_1/board_info.txt A src/mainboard/apple/macbookpro8_1/cmos.default A src/mainboard/apple/macbookpro8_1/cmos.layout A src/mainboard/apple/macbookpro8_1/devicetree.cb A src/mainboard/apple/macbookpro8_1/dsdt.asl A src/mainboard/apple/macbookpro8_1/gpio.c A src/mainboard/apple/macbookpro8_1/hda_verb.c A src/mainboard/apple/macbookpro8_1/mainboard.c A src/mainboard/apple/macbookpro8_1/romstage.c 16 files changed, 816 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/51/33151/1 diff --git a/src/mainboard/apple/macbookpro8_1/Kconfig b/src/mainboard/apple/macbookpro8_1/Kconfig new file mode 100644 index 0000000..c838bea --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/Kconfig @@ -0,0 +1,43 @@ +if BOARD_APPLE_MACBOOKPRO8_1 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select EC_ACPI + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select NORTHBRIDGE_INTEL_SANDYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_BD82X6X + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + select MAINBOARD_HAS_LIBGFXINIT + select GFX_GMA_INTERNAL_IS_LVDS + select HAVE_CMOS_DEFAULT + select HAVE_OPTION_TABLE + +config MAINBOARD_DIR + string + default apple/macbookpro8_1 + +config MAINBOARD_PART_NUMBER + string + default "MacBookPro8,1" + +config VGA_BIOS_FILE + string + default "pci8086,0126.rom" + +config VGA_BIOS_ID + string + default "8086,0126" + +config DRAM_RESET_GATE_GPIO + int + default 28 + +config MAX_CPUS + int + default 8 +endif diff --git a/src/mainboard/apple/macbookpro8_1/Kconfig.name b/src/mainboard/apple/macbookpro8_1/Kconfig.name new file mode 100644 index 0000000..06a7de5 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_APPLE_MACBOOKPRO8_1 + bool "MacBookPro8,1" diff --git a/src/mainboard/apple/macbookpro8_1/Makefile.inc b/src/mainboard/apple/macbookpro8_1/Makefile.inc new file mode 100644 index 0000000..ebe01ae --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/Makefile.inc @@ -0,0 +1,2 @@ +romstage-y += gpio.c +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/apple/macbookpro8_1/acpi/ec.asl b/src/mainboard/apple/macbookpro8_1/acpi/ec.asl new file mode 100644 index 0000000..cd74865 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/acpi/ec.asl @@ -0,0 +1,18 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <ec/apple/acpi/ec.asl> +#include <ec/apple/acpi/ac_60.asl> +#include <ec/apple/acpi/lid_60.asl> diff --git a/src/mainboard/apple/macbookpro8_1/acpi/platform.asl b/src/mainboard/apple/macbookpro8_1/acpi/platform.asl new file mode 100644 index 0000000..3603581 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/acpi/platform.asl @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ +} diff --git a/src/mainboard/apple/macbookpro8_1/acpi/superio.asl b/src/mainboard/apple/macbookpro8_1/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/acpi/superio.asl diff --git a/src/mainboard/apple/macbookpro8_1/acpi_tables.c b/src/mainboard/apple/macbookpro8_1/acpi_tables.c new file mode 100644 index 0000000..6b731cc --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/acpi_tables.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/apple/macbookpro8_1/board_info.txt b/src/mainboard/apple/macbookpro8_1/board_info.txt new file mode 100644 index 0000000..8e0e321 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/board_info.txt @@ -0,0 +1,6 @@ +Category: laptop +ROM protocol: SPI +Flashrom support: n +ROM package: SOIC-8 +ROM socketed: n +Release year: 2011 diff --git a/src/mainboard/apple/macbookpro8_1/cmos.default b/src/mainboard/apple/macbookpro8_1/cmos.default new file mode 100644 index 0000000..53e85a3 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/cmos.default @@ -0,0 +1 @@ +debug_level=Debug diff --git a/src/mainboard/apple/macbookpro8_1/cmos.layout b/src/mainboard/apple/macbookpro8_1/cmos.layout new file mode 100644 index 0000000..aa9f563 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/cmos.layout @@ -0,0 +1,114 @@ +## +## This file is part of the coreboot project. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +# Status Register A +# ----------------------------------------------------------------- +# Status Register B +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +388 4 h 0 reboot_counter +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +#392 3 r 0 unused +395 4 e 6 debug_level +#399 1 r 0 unused + +#400 8 r 0 reserved for century byte + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + +# coreboot config options: EC +#411 1 e 8 first_battery +#412 1 e 1 bluetooth +#413 1 e 1 wwan +#414 1 e 1 touchpad +#415 1 e 1 wlan +#416 1 e 1 trackpoint +#417 1 e 1 fn_ctrl_swap +#418 1 e 1 sticky_fn +#419 2 e 13 usb_always_on +#421 1 e 9 sata_mode +#422 2 e 10 backlight + +# coreboot config options: cpu +#424 8 r 0 unused + +# coreboot config options: northbridge +#432 5 e 11 gfx_uma_size +#437 3 r 0 unused +#440 8 h 0 volume + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 +960 16 r 0 mrc_scrambler_seed_chk + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +6 0 Emergency +6 1 Alert +6 2 Critical +6 3 Error +6 4 Warning +6 5 Notice +6 6 Info +6 7 Debug +6 8 Spew +7 0 Disable +7 1 Enable +7 2 Keep + +# ----------------------------------------------------------------- +checksums + +checksum 392 447 984 diff --git a/src/mainboard/apple/macbookpro8_1/devicetree.cb b/src/mainboard/apple/macbookpro8_1/devicetree.cb new file mode 100644 index 0000000..db21a62 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/devicetree.cb @@ -0,0 +1,113 @@ +chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.link_frequency_270_mhz" = "1" + register "gfx.ndid" = "3" + register "gfx.use_spread_spectrum_clock" = "1" + register "gpu_cpu_backlight" = "0x00001312" + register "gpu_dp_b_hotplug" = "4" + register "gpu_dp_c_hotplug" = "4" + register "gpu_dp_d_hotplug" = "4" + register "gpu_panel_port_select" = "0" + register "gpu_panel_power_backlight_off_delay" = "2000" + register "gpu_panel_power_backlight_on_delay" = "2000" + register "gpu_panel_power_cycle_delay" = "5" + register "gpu_panel_power_down_delay" = "500" + register "gpu_panel_power_up_delay" = "600" + register "gpu_pch_backlight" = "0x13121312" + + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on + end + device lapic 0xacac off + end + end + end + + register "pci_mmio_size" = "2048" + + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "0" + register "gen1_dec" = "0x000c0681" + register "gen2_dec" = "0x000c1641" + register "gen3_dec" = "0x001c0301" + register "gen4_dec" = "0x00fc0701" + register "gpi7_routing" = "2" + register "p_cnt_throttling_supported" = "1" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x3" + register "spi_lvscc" = "0x0" + register "spi_uvscc" = "0x2005" + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x8086 0x7270 + end + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on # USB2 EHCI #2 Unsupported PCI device 8086:1c2c + subsystemid 0x8086 0x7270 + end + device pci 1b.0 on # High Definition Audio Audio controller + subsystemid 0x8086 0x7270 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x8086 0x7270 + end + device pci 1c.1 on # PCIe Port #2 + subsystemid 0x8086 0x7270 + end + device pci 1c.2 on # PCIe Port #3 + subsystemid 0x8086 0x7270 + end + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on # USB2 EHCI #1 Unsupported PCI device 8086:1c27 + subsystemid 0x8086 0x7270 + end + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge PCI-LPC bridge + subsystemid 0x8086 0x7270 + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x8086 0x7270 + end + device pci 1f.3 on # SMBus + subsystemid 0x8086 0x7270 + end + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x106b 0x00db + end + device pci 01.0 off # PCIe Bridge for discrete graphics + subsystemid 0x106b 0x00db + end + device pci 02.0 on # Internal graphics VGA controller + subsystemid 0x106b 0x00db + end + device pci 01.1 on + subsystemid 0x106b 0x00db + end + device pci 1a.7 on + subsystemid 0x8086 0x7270 + end + device pci 1d.7 on + subsystemid 0x8086 0x7270 + end + end +end diff --git a/src/mainboard/apple/macbookpro8_1/dsdt.asl b/src/mainboard/apple/macbookpro8_1/dsdt.asl new file mode 100644 index 0000000..455ac17 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/dsdt.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB +#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0 + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + /* Some generic macros */ + #include "acpi/platform.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + /* global NVS and variables. */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/apple/macbookpro8_1/gpio.c b/src/mainboard/apple/macbookpro8_1/gpio.c new file mode 100644 index 0000000..d3555ef --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/gpio.c @@ -0,0 +1,231 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_OUTPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_INPUT, + .gpio29 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio16 = GPIO_LEVEL_LOW, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_LOW, + .gpio23 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio24 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio4 = GPIO_INVERT, + .gpio5 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio9 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_GPIO, + .gpio41 = GPIO_MODE_GPIO, + .gpio42 = GPIO_MODE_GPIO, + .gpio43 = GPIO_MODE_GPIO, + .gpio44 = GPIO_MODE_GPIO, + .gpio45 = GPIO_MODE_GPIO, + .gpio46 = GPIO_MODE_GPIO, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_GPIO, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_INPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_OUTPUT, + .gpio39 = GPIO_DIR_OUTPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_INPUT, + .gpio42 = GPIO_DIR_INPUT, + .gpio43 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_OUTPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_OUTPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio52 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio59 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio33 = GPIO_LEVEL_LOW, + .gpio34 = GPIO_LEVEL_HIGH, + .gpio37 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_LOW, + .gpio39 = GPIO_LEVEL_LOW, + .gpio45 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_GPIO, + .gpio65 = GPIO_MODE_GPIO, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_INPUT, + .gpio65 = GPIO_DIR_INPUT, + .gpio66 = GPIO_DIR_INPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/apple/macbookpro8_1/hda_verb.c b/src/mainboard/apple/macbookpro8_1/hda_verb.c new file mode 100644 index 0000000..d6cb85e --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/hda_verb.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10134206, /* Codec Vendor / Device ID: Cirrus */ + 0x106b1c00, /* Subsystem ID */ + + 0x0000000b, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x106b1c00), + + /* NID 0x09. */ + AZALIA_PIN_CFG(0x0, 0x09, 0x012b4030), + + /* NID 0x0a. */ + AZALIA_PIN_CFG(0x0, 0x0a, 0x90100121), + + /* NID 0x0b. */ + AZALIA_PIN_CFG(0x0, 0x0b, 0x90100120), + + /* NID 0x0c. */ + AZALIA_PIN_CFG(0x0, 0x0c, 0x400000f0), + + /* NID 0x0d. */ + AZALIA_PIN_CFG(0x0, 0x0d, 0x90a00110), + + /* NID 0x0e. */ + AZALIA_PIN_CFG(0x0, 0x0e, 0x400000f0), + + /* NID 0x0f. */ + AZALIA_PIN_CFG(0x0, 0x0f, 0x400000f0), + + /* NID 0x10. */ + AZALIA_PIN_CFG(0x0, 0x10, 0x004be040), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x0, 0x12, 0x400000f0), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x0, 0x15, 0x400000f0), + 0x80862805, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + + 0x00000004, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x3, 0x80860101), + + /* NID 0x05. */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* NID 0x06. */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560010), + + /* NID 0x07. */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560010), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/apple/macbookpro8_1/mainboard.c b/src/mainboard/apple/macbookpro8_1/mainboard.c new file mode 100644 index 0000000..fe63303 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/mainboard.c @@ -0,0 +1,39 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/acpi/ec.h> +#include <console/console.h> + +static void mainboard_init(struct device *dev) +{ + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00800000; +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, + GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/apple/macbookpro8_1/romstage.c b/src/mainboard/apple/macbookpro8_1/romstage.c new file mode 100644 index 0000000..4dffacb --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/romstage.c @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <string.h> +#include <arch/byteorder.h> +#include <device/pci_ops.h> +#include <device/pnp_ops.h> +#include <console/console.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> + +void pch_enable_lpc(void) +{ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x000c0681); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000c1641); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x001c0301); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x00fc0701); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0070); +} + +void mainboard_rcba_config(void) +{ +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/33151 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7a7dc6d6c16751403ce276d2778dc915cd69f3f2 Gerrit-Change-Number: 33151 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.com> Gerrit-MessageType: newchange

5 46

Change in coreboot[master]: spi/winbond: Merge redundant if wrapper into switch
by Daniel Gröber (dxld) (Code Review) 27 Feb '23

27 Feb '23

Hello Daniel Gröber, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/42118 to review the following change. Change subject: spi/winbond: Merge redundant if wrapper into switch ...................................................................... spi/winbond: Merge redundant if wrapper into switch Change-Id: I9c66fed2e4dcf4a13933c77e828ebc4ac4126ea4 Signed-off-by: Daniel Gröber <dxld(a)darkboxed.org> --- M src/drivers/spi/winbond.c 1 file changed, 22 insertions(+), 22 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/18/42118/1 diff --git a/src/drivers/spi/winbond.c b/src/drivers/spi/winbond.c index d7a750b..49d3c5b 100644 --- a/src/drivers/spi/winbond.c +++ b/src/drivers/spi/winbond.c @@ -553,33 +553,33 @@ return -1; } - if (mode != SPI_WRITE_PROTECTION_PRESERVE) { - switch (mode) { - case SPI_WRITE_PROTECTION_NONE: - bits->winbond.srp1 = 0; - bits->winbond.srp0 = 0; + switch (mode) { + case SPI_WRITE_PROTECTION_PRESERVE: break; - case SPI_WRITE_PROTECTION_PIN: - bits->winbond.srp1 = 0; - bits->winbond.srp0 = 1; + case SPI_WRITE_PROTECTION_NONE: + bits->winbond.srp1 = 0; + bits->winbond.srp0 = 0; break; - case SPI_WRITE_PROTECTION_REBOOT: + case SPI_WRITE_PROTECTION_PIN: + bits->winbond.srp1 = 0; + bits->winbond.srp0 = 1; + break; + case SPI_WRITE_PROTECTION_REBOOT: + bits->winbond.srp1 = 1; + bits->winbond.srp0 = 0; + break; + case SPI_WRITE_PROTECTION_PERMANENT: + if (params->bp_bits == 3) { bits->winbond.srp1 = 1; - bits->winbond.srp0 = 0; - break; - case SPI_WRITE_PROTECTION_PERMANENT: - if (params->bp_bits == 3) { - bits->winbond.srp1 = 1; - bits->winbond.srp0 = 1; - } else { - /* FIXME: special permanent protect write - * sequence not implemented. */ - return -1; - } - break; - default: + bits->winbond.srp0 = 1; + } else { + /* FIXME: special permanent protect write sequence + * not implemented. */ return -1; } + break; + default: + return -1; } return 0; -- To view, visit https://review.coreboot.org/c/coreboot/+/42118 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9c66fed2e4dcf4a13933c77e828ebc4ac4126ea4 Gerrit-Change-Number: 42118 Gerrit-PatchSet: 1 Gerrit-Owner: Daniel Gröber (dxld) Gerrit-Reviewer: Daniel Gröber <dxld(a)darkboxed.org> Gerrit-MessageType: newchange

3 3

Change in coreboot[master]: spi/winbond: Add a test for block protection status bits
by Daniel Gröber (dxld) (Code Review) 27 Feb '23

27 Feb '23

Hello Daniel Gröber, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/42117 to review the following change. Change subject: spi/winbond: Add a test for block protection status bits ...................................................................... spi/winbond: Add a test for block protection status bits With refactoring out of the way we can add a test to make sure the region<>bpbits mapping is correct. Indeed we found that a number of configurations are incorrect. The datasheets say that min/max bp values should protect either all or none of the flash depending on the cmp and tb bits. However we currently always return no protection for these values. The test merely documents the current behavour, a fix will come in a later commit. Change-Id: Ieb0632221203166288f9608c8492c1d4bd77dd36 Signed-off-by: Daniel Gröber <dxld(a)darkboxed.org> --- M src/drivers/spi/spi_flash.c M src/drivers/spi/spi_flash_internal.h M src/drivers/spi/spi_winbond.h M src/drivers/spi/winbond.c A tests/drivers/Makefile.inc A tests/drivers/winbond-spi-test.c 6 files changed, 344 insertions(+), 13 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/17/42117/1 diff --git a/src/drivers/spi/spi_flash.c b/src/drivers/spi/spi_flash.c index a389bc4..33416b5 100644 --- a/src/drivers/spi/spi_flash.c +++ b/src/drivers/spi/spi_flash.c @@ -337,7 +337,7 @@ }; #define IDCODE_LEN 5 -static int fill_spi_flash(const struct spi_slave *spi, struct spi_flash *flash, +int fill_spi_flash(const struct spi_slave *spi, struct spi_flash *flash, const struct spi_flash_vendor_info *vi, const struct spi_flash_part_id *part) { diff --git a/src/drivers/spi/spi_flash_internal.h b/src/drivers/spi/spi_flash_internal.h index b4d39b3..1ed0ab3 100644 --- a/src/drivers/spi/spi_flash_internal.h +++ b/src/drivers/spi/spi_flash_internal.h @@ -24,6 +24,13 @@ /* Common status */ #define STATUS_WIP 0x01 +struct spi_flash_vendor_info; +struct spi_flash_part_id; + +int fill_spi_flash(const struct spi_slave *spi, struct spi_flash *flash, + const struct spi_flash_vendor_info *vi, + const struct spi_flash_part_id *part); + /* Send a single-byte command to the device and read the response */ int spi_flash_cmd(const struct spi_slave *spi, u8 cmd, void *response, size_t len); diff --git a/src/drivers/spi/spi_winbond.h b/src/drivers/spi/spi_winbond.h index bdf6694..ff799ff 100644 --- a/src/drivers/spi/spi_winbond.h +++ b/src/drivers/spi/spi_winbond.h @@ -21,3 +21,16 @@ /* tw: Maximum time to write a flash cell in milliseconds */ #define WINBOND_FLASH_TIMEOUT 30 + +int winbond_region_to_bpbits( + const struct spi_flash *flash, + const struct spi_flash_part_id *params, + const struct region *region, + const enum spi_flash_status_reg_lockdown mode, + struct spi_flash_bpbits *bits); + +void winbond_bpbits_to_region( + const size_t granularity, + const struct spi_flash_bpbits *bits, + const size_t flash_size, + struct region *out); diff --git a/src/drivers/spi/winbond.c b/src/drivers/spi/winbond.c index f68d9d9..d7a750b 100644 --- a/src/drivers/spi/winbond.c +++ b/src/drivers/spi/winbond.c @@ -211,21 +211,14 @@ static int winbond_get_bpbits(const struct spi_flash *flash, struct spi_flash_bpbits *bpbits); -static int winbond_region_to_bpbits( - const struct spi_flash *flash, - const struct spi_flash_part_id *params, - const struct region *region, - const enum spi_flash_status_reg_lockdown mode, - struct spi_flash_bpbits *bits); - /* * Convert BPx, TB and CMP to a region. * SEC (if available) must be zero. */ -static void winbond_bpbits_to_region(const size_t granularity, - const struct spi_flash_bpbits *bits, - const size_t flash_size, - struct region *out) +void winbond_bpbits_to_region(const size_t granularity, + const struct spi_flash_bpbits *bits, + const size_t flash_size, + struct region *out) { size_t protected_size = MIN(bits->bp ? granularity << (bits->bp - 1) : 0, flash_size); @@ -514,7 +507,7 @@ return ret; } -static int winbond_region_to_bpbits( +int winbond_region_to_bpbits( const struct spi_flash *flash, const struct spi_flash_part_id *params, const struct region *region, diff --git a/tests/drivers/Makefile.inc b/tests/drivers/Makefile.inc new file mode 100644 index 0000000..6e5dff3 --- /dev/null +++ b/tests/drivers/Makefile.inc @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only + +tests-y += winbond-spi-test + +winbond-spi-test-srcs += tests/drivers/winbond-spi-test.c +winbond-spi-test-srcs += src/drivers/spi/winbond.c +winbond-spi-test-srcs += src/drivers/spi/spi_flash.c +winbond-spi-test-srcs += src/commonlib/region.c +winbond-spi-test-srcs += src/commonlib/mem_pool.c diff --git a/tests/drivers/winbond-spi-test.c b/tests/drivers/winbond-spi-test.c new file mode 100644 index 0000000..da7177b --- /dev/null +++ b/tests/drivers/winbond-spi-test.c @@ -0,0 +1,309 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <stdarg.h> +#include <stddef.h> +#include <setjmp.h> +#include <cmocka.h> + +#include <string.h> + +#include <stdio.h> /* debug */ + +#include <commonlib/helpers.h> +#include <spi_flash.h> +#include <spi-generic.h> +#include "../drivers/spi/spi_flash_internal.h" +#include "../drivers/spi/spi_winbond.h" + +int fill_spi_flash(const struct spi_slave *spi, struct spi_flash *flash, + const struct spi_flash_vendor_info *vi, + const struct spi_flash_part_id *part); + +struct block_region { + /* these are in units of 64k-byte blocks */ + size_t offset; + size_t size; +}; + +struct bp_table { + uint16_t id; + size_t size; + struct block_region wp_blocks[2][2][1<<4]; +} bp_table[] = { + { + /* W25Q256J */ + .id = 0x7019, + .wp_blocks = { + /* [cmp][tb][bp] */ + /* off size */ + + /* cmp=0, tb=x, bp=0b0000: NONE */ + [0][0][0] = { 0, 0 }, + [0][1][0] = { 0, 0 }, + + /* cmp=1, tb=x, bp=0b0000: FIXME: ALL */ + [1][0][0] = { 0, 0 }, + [1][1][0] = { 0, 0 }, + + /* cmp=0, tb=x, bp=0b110x|0b1x1x: FIXME: ALL */ + [0][0 ... 1][10 ... 15] = { 0, 0 }, + + /* cmp=1, tb=x, bp=0b110x|0b1x1x: NONE */ + [1][0 ... 1][10 ... 15] = { 0, 0 }, + + [0][0][1] = { 511, 1 }, + [0][0][2] = { 510, 2 }, + [0][0][3] = { 508, 4 }, + [0][0][4] = { 504, 8 }, + [0][0][5] = { 496, 16 }, + [0][0][6] = { 480, 32 }, + [0][0][7] = { 448, 64 }, + [0][0][8] = { 384, 128 }, + [0][0][9] = { 256, 256 }, + + [0][1][1] = { 0, 1 }, + [0][1][2] = { 0, 2 }, + [0][1][3] = { 0, 4 }, + [0][1][4] = { 0, 8 }, + [0][1][5] = { 0, 16 }, + [0][1][6] = { 0, 32 }, + [0][1][7] = { 0, 64 }, + [0][1][8] = { 0, 128 }, + [0][1][9] = { 0, 256 }, + + [1][0][1] = { 0, 512-1 }, + [1][0][2] = { 0, 512-2 }, + [1][0][3] = { 0, 512-4 }, + [1][0][4] = { 0, 512-8 }, + [1][0][5] = { 0, 512-16 }, + [1][0][6] = { 0, 512-32 }, + [1][0][7] = { 0, 512-64 }, + [1][0][8] = { 0, 512-128 }, + [1][0][9] = { 0, 512-256 }, + + [1][1][1] = { 1, 512-1 }, + [1][1][2] = { 2, 512-2 }, + [1][1][3] = { 4, 512-4 }, + [1][1][4] = { 8, 512-8 }, + [1][1][5] = { 16, 512-16 }, + [1][1][6] = { 32, 512-32 }, + [1][1][7] = { 64, 512-64 }, + [1][1][8] = { 128, 512-128 }, + [1][1][9] = { 256, 512-256 }, + } + }, + + { + /* W25Q128FW */ + .id = 0x6018, + .wp_blocks = { + /* [cmp][tb][bp] */ + /* off size */ + [0][0][0] = { 0, 0 }, + + /* cmp=0, tb=x, bp=0b000: NONE */ + [0][0][0] = { 0, 0 }, + [0][1][0] = { 0, 0 }, + + /* cmp=0, tb=x, bp=0b111: FIXME: ALL */ + [0][0][7] = { 0, 0 }, + [0][1][7] = { 0, 0 }, + + [0][0][1] = { 252, 4 }, + [0][0][2] = { 248, 8 }, + [0][0][3] = { 240, 16 }, + [0][0][4] = { 224, 32 }, + [0][0][5] = { 192, 64 }, + [0][0][6] = { 128, 128 }, + + [0][1][1] = { 0, 4 }, + [0][1][2] = { 0, 8 }, + [0][1][3] = { 0, 16 }, + [0][1][4] = { 0, 32 }, + [0][1][5] = { 0, 64 }, + [0][1][6] = { 0, 128 }, + + /* cmp=1, tb=x, bp=0b000: FIXME: ALL */ + [1][0][0] = { 0, 0 }, + [1][1][0] = { 0, 0 }, + + /* cmp=1, tb=x, bp=0b111: NONE */ + [1][0][7] = { 0, 0 }, + [1][1][7] = { 0, 0 }, + + [1][0][1] = { 0, 256-4 }, + [1][0][2] = { 0, 256-8 }, + [1][0][3] = { 0, 256-16 }, + [1][0][4] = { 0, 256-32 }, + [1][0][5] = { 0, 256-64 }, + [1][0][6] = { 0, 256-128 }, + + [1][1][1] = { 4, 256-4 }, + [1][1][2] = { 8, 256-8 }, + [1][1][3] = { 16, 256-16 }, + [1][1][4] = { 32, 256-32 }, + [1][1][5] = { 64, 256-64 }, + [1][1][6] = { 128, 256-128 }, + } + } +}; + +static void test_one_config( + void **state, + struct spi_flash flash, + const struct spi_flash_part_id *part, + const struct bp_table *table, + const struct spi_flash_bpbits *bpbits) +{ + const size_t granularity = + 1<<part->protection_granularity_shift; + + struct region expected, out = {-1, -1}; + struct region roundtripped = {-1, -1}; + + winbond_bpbits_to_region(granularity, bpbits, + flash.size, &out); + + enum spi_flash_status_reg_lockdown mode = + SPI_WRITE_PROTECTION_PIN; + struct spi_flash_bpbits bpbits1; + winbond_region_to_bpbits(&flash, part, &out, mode, + &bpbits1); + + winbond_bpbits_to_region(granularity, &bpbits1, + flash.size, &roundtripped); + + const struct block_region *wp_blocks = + &table->wp_blocks[bpbits->cmp][bpbits->tb][bpbits->bp]; + const size_t block_size = 1<<16; + + expected.offset = wp_blocks->offset * block_size; + expected.size = wp_blocks->size * block_size; + +#if 0 + /* debugging */ + print_message("\nfor part 0x%04x cmp=%d tb=%d bp=%d:\n", + part->id[0], (int)bpbits->cmp, (int)bpbits->tb, + (int)bpbits->bp); + print_message("should: 0x%08zx-0x%08zx\n", + region_offset(&expected), + region_end(&expected)); + print_message("is: 0x%08zx-0x%08zx\n", + region_offset(&out), + region_end(&out)); + print_message("rt'ed: 0x%08zx-0x%08zx\n", + region_offset(&roundtripped), + region_end(&roundtripped)); + print_message("bp1: %d\n", bpbits1.bp); +#endif + + assert_true(expected.size == out.size); + assert_true(expected.offset == out.offset); + + assert_true(expected.size == roundtripped.size); + assert_true(expected.offset == roundtripped.offset); +} + +static void winbond_region_bpbits_roundtrip_test(void **state) +{ + int n_cfgs_tested = 0; + + const struct spi_flash_vendor_info *vi = &spi_flash_winbond_vi; + + for (size_t i = 0; i < vi->nr_part_ids; i++) { + const struct spi_flash_part_id *part = &vi->ids[i]; + + if (!part->protection_granularity_shift) + continue; + + /* FIXME: Add tables for the other parts supporting block + * protection */ + if (part->id[0] != 0x7019 && part->id[0] != 0x6018) + continue; + + struct spi_slave spi; + struct spi_flash flash; + int ret = fill_spi_flash(&spi, &flash, vi, part); + assert_int_equal(ret, 0); + + const struct bp_table *table = NULL; + for (uint16_t j = 0; j < ARRAY_SIZE(bp_table); j++) { + if (bp_table[j].id == part->id[0]) { + table = &bp_table[j]; + break; + } + } + + assert_non_null(table); + + /* FIXME: Max values below are clamped to 6 and 9 + * respectively because the implementation currently thinks + * everything above those is fully protected when the + * datasheets say the protection range is empty in those + * cases. */ + u8 bp_max; + if (part->bp_bits == 3) + bp_max = 6; + else if (part->bp_bits == 4) + bp_max = 9; + else + fail_msg("Unrecognized bp_bits"); + + for (u8 tbcmp = 0; tbcmp < 4; tbcmp++) { + /* FIXME: bp=0 isn't tested because the + * implementation is currently wrong */ + for (u8 bp = 1; bp <= bp_max; bp++) { + struct spi_flash_bpbits bpbits = { + .cmp = tbcmp & (1<<1), + .tb = tbcmp & (1<<0), + .bp = bp, + }; + + test_one_config( + state, flash, part, table, &bpbits); + + n_cfgs_tested++; + } + } + } + + assert_true(n_cfgs_tested == 60); +} + + /* Mocks */ +int do_printk(int msg_level, const char *fmt, ...) +{ + return -1; +} +int spi_claim_bus(const struct spi_slave *slave) +{ + return -1; +} +int spi_xfer_vector(const struct spi_slave *slave, + struct spi_op vectors[], size_t count) +{ + return -1; +} +void spi_release_bus(const struct spi_slave *slave) +{ +} +unsigned int spi_crop_chunk(const struct spi_slave *slave, unsigned int cmd_len, + unsigned int buf_len) +{ + return 0; +} +struct mono_time; +void timer_monotonic_get(struct mono_time *mt) +{ +} + +const struct spi_flash_ops_descriptor spi_flash_pp_0x20_sector_desc; + +int main(void) +{ + const struct CMUnitTest tests[] = { + cmocka_unit_test(winbond_region_bpbits_roundtrip_test), + }; + + return cmocka_run_group_tests(tests, NULL, NULL); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/42117 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ieb0632221203166288f9608c8492c1d4bd77dd36 Gerrit-Change-Number: 42117 Gerrit-PatchSet: 1 Gerrit-Owner: Daniel Gröber (dxld) Gerrit-Reviewer: Daniel Gröber <dxld(a)darkboxed.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

3 6

Change in coreboot[master]: spi/winbond: Pull out winbond_set_bpbits function
by Daniel Gröber (dxld) (Code Review) 27 Feb '23

27 Feb '23

Hello Daniel Gröber, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/42121 to review the following change. Change subject: spi/winbond: Pull out winbond_set_bpbits function ...................................................................... spi/winbond: Pull out winbond_set_bpbits function Split bpbits write code from winbond_set_write_protection into a new function: winbond_set_bpbits. Change-Id: If3ed24cd5bf31272bad5c3a404503cc0b3889e98 Signed-off-by: Daniel Gröber <dxld(a)darkboxed.org> --- M src/drivers/spi/winbond.c 1 file changed, 68 insertions(+), 54 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/21/42121/1 diff --git a/src/drivers/spi/winbond.c b/src/drivers/spi/winbond.c index afffd4d..b834585 100644 --- a/src/drivers/spi/winbond.c +++ b/src/drivers/spi/winbond.c @@ -210,6 +210,9 @@ static int winbond_get_bpbits(const struct spi_flash *flash, struct spi_flash_bpbits *bpbits); +static int winbond_set_bpbits(const struct spi_flash *flash, + const struct spi_flash_part_id *params, + const struct spi_flash_bpbits *bpbits); /* * Convert BPx, TB and CMP to a region. @@ -432,84 +435,48 @@ return ret; } -/* - * Available on all devices. - * Protect a region starting from start of flash or end of flash. - * The caller must provide a supported protected region size. - * SEC isn't supported and set to zero. - * Write block protect bits to Status/Status2 Reg. - * Optionally lock the status register if lock_sreg is set with the provided - * mode. - * - * @param flash: The flash to operate on - * @param region: The region to write protect - * @param mode: Optional status register lock-down mode - * - * @return 0 on success - */ -static int -winbond_set_write_protection(const struct spi_flash *flash, - const struct region *region, - const enum spi_flash_status_reg_lockdown mode) +static int winbond_set_bpbits(const struct spi_flash *flash, + const struct spi_flash_part_id *params, + const struct spi_flash_bpbits *bpbits) { - const struct spi_flash_part_id *params; - struct status_regs mask, val; - struct spi_flash_bpbits bpbits; + struct status_regs msk, val; int ret; - params = flash->part; - - if (!params) - return -1; - - ret = winbond_get_bpbits(flash, &bpbits); - if (!ret) - return ret; - - ret = winbond_region_to_bpbits(flash, params, region, mode, &bpbits); - if (!ret) - return ret; - - /* Write block protection bits */ - if (params->bp_bits == 3) { val.reg1 = (union status_reg1) { - .bp3 = { .bp = bpbits.bp, .tb = bpbits.tb, .sec = 0 } + .bp3 = { .bp = bpbits->bp, .tb = bpbits->tb, .sec = 0 } }; - mask.reg1 = (union status_reg1) { + msk.reg1 = (union status_reg1) { .bp3 = { .bp = ~0, .tb = 1, .sec = 1 } }; } else { val.reg1 = (union status_reg1) { - .bp4 = { .bp = bpbits.bp, .tb = bpbits.tb } + .bp4 = { .bp = bpbits->bp, .tb = bpbits->tb } }; - mask.reg1 = (union status_reg1) { + msk.reg1 = (union status_reg1) { .bp4 = { .bp = ~0, .tb = 1 } }; } - val.reg2 = (union status_reg2) { .cmp = bpbits.cmp }; - mask.reg2 = (union status_reg2) { .cmp = 1 }; + val.reg2 = (union status_reg2) { .cmp = bpbits->cmp }; + msk.reg2 = (union status_reg2) { .cmp = 1 }; if (params->bp_bits == 3) { - val.reg1.bp3.srp0 = bpbits.winbond.srp0; - mask.reg1.bp3.srp0 = 1; + val.reg1.bp3.srp0 = bpbits->winbond.srp0; + msk.reg1.bp3.srp0 = 1; } else { - val.reg1.bp4.srp = bpbits.winbond.srp0; - mask.reg1.bp4.srp = 1; + val.reg1.bp4.srp = bpbits->winbond.srp; + msk.reg1.bp4.srp = 1; } - val.reg2.srp1 = bpbits.winbond.srp1; - mask.reg2.srp1 = 1; + val.reg2.srp1 = bpbits->winbond.srp1; + msk.reg2.srp1 = 1; - ret = winbond_flash_cmd_status(flash, mask.u, val.u, true); + ret = winbond_flash_cmd_status(flash, msk.u, val.u, true); if (ret) return ret; - printk(BIOS_DEBUG, "WINBOND: write-protection set to range " - "0x%08zx-0x%08zx\n", region_offset(region), region_end(region)); - - return ret; + return 0; } int winbond_region_to_bpbits( @@ -590,6 +557,53 @@ return 0; } +/* + * Available on all devices. + * Protect a region starting from start of flash or end of flash. + * The caller must provide a supported protected region size. + * SEC isn't supported and set to zero. + * Write block protect bits to Status/Status2 Reg. + * Optionally lock the status register if lock_sreg is set with the provided + * mode. + * + * @param flash: The flash to operate on + * @param region: The region to write protect + * @param mode: Optional status register lock-down mode + * + * @return 0 on success + */ +static int +winbond_set_write_protection(const struct spi_flash *flash, + const struct region *region, + const enum spi_flash_status_reg_lockdown mode) +{ + const struct spi_flash_part_id *params; + struct spi_flash_bpbits bpbits; + int ret; + + params = flash->part; + if (!params) + return -1; + + ret = winbond_get_bpbits(flash, &bpbits); + if (!ret) + return ret; + + ret = winbond_region_to_bpbits(flash, params, region, mode, &bpbits); + if (!ret) + return ret; + + + ret = winbond_set_bpbits(flash, params, &bpbits); + if (!ret) + return ret; + + printk(BIOS_DEBUG, "WINBOND: write-protection set to range " + "0x%08zx-0x%08zx\n", region_offset(region), region_end(region)); + + return ret; +} + static const struct spi_flash_protection_ops spi_flash_protection_ops = { .get_write = winbond_get_write_protection, .set_write = winbond_set_write_protection, -- To view, visit https://review.coreboot.org/c/coreboot/+/42121 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: If3ed24cd5bf31272bad5c3a404503cc0b3889e98 Gerrit-Change-Number: 42121 Gerrit-PatchSet: 1 Gerrit-Owner: Daniel Gröber (dxld) Gerrit-Reviewer: Daniel Gröber <dxld(a)darkboxed.org> Gerrit-MessageType: newchange

3 3

Change in coreboot[master]: spi/winbond: Add 'params' as get_bpbits arg
by Daniel Gröber (dxld) (Code Review) 27 Feb '23

27 Feb '23

Hello Daniel Gröber, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/42122 to review the following change. Change subject: spi/winbond: Add 'params' as get_bpbits arg ...................................................................... spi/winbond: Add 'params' as get_bpbits arg This lets us avoid repeted checks for flash->part being NULL. Change-Id: I385fd0a73733ce23b3cc22557037f4a9aa3b331d Signed-off-by: Daniel Gröber <dxld(a)darkboxed.org> --- M src/drivers/spi/winbond.c 1 file changed, 4 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/22/42122/1 diff --git a/src/drivers/spi/winbond.c b/src/drivers/spi/winbond.c index b834585..d127287 100644 --- a/src/drivers/spi/winbond.c +++ b/src/drivers/spi/winbond.c @@ -209,6 +209,7 @@ }; static int winbond_get_bpbits(const struct spi_flash *flash, + const struct spi_flash_part_id *params, struct spi_flash_bpbits *bpbits); static int winbond_set_bpbits(const struct spi_flash *flash, const struct spi_flash_part_id *params, @@ -267,7 +268,7 @@ if (!params) return -1; - ret = winbond_get_bpbits(flash, &bpbits); + ret = winbond_get_bpbits(flash, params, &bpbits); if (ret) return ret; @@ -286,16 +287,13 @@ } static int winbond_get_bpbits(const struct spi_flash *flash, + const struct spi_flash_part_id *params, struct spi_flash_bpbits *bpbits) { union status_reg1 reg1 = { .u = 0 }; union status_reg2 reg2 = { .u = 0 }; int ret; - const struct spi_flash_part_id *params = flash->part; - if (!params) - return -1; - ret = spi_flash_cmd(&flash->spi, flash->status_cmd, &reg1.u, sizeof(reg1.u)); if (ret) @@ -585,7 +583,7 @@ if (!params) return -1; - ret = winbond_get_bpbits(flash, &bpbits); + ret = winbond_get_bpbits(flash, params, &bpbits); if (!ret) return ret; -- To view, visit https://review.coreboot.org/c/coreboot/+/42122 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I385fd0a73733ce23b3cc22557037f4a9aa3b331d Gerrit-Change-Number: 42122 Gerrit-PatchSet: 1 Gerrit-Owner: Daniel Gröber (dxld) Gerrit-Reviewer: Daniel Gröber <dxld(a)darkboxed.org> Gerrit-MessageType: newchange

3 3

Change in coreboot[master]: spi: Use common code for top-level flash block protection functions
by Daniel Gröber (dxld) (Code Review) 27 Feb '23

27 Feb '23

Hello Daniel Gröber, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/42123 to review the following change. Change subject: spi: Use common code for top-level flash block protection functions ...................................................................... spi: Use common code for top-level flash block protection functions This turns *_get_write_protection and *_set_write_protection into common code by having the vendor code implement getter/setter functions for bpbits and convertion functions between bpbits and a region. Change-Id: I509a1cedff5de4bee34b8856ce651d100a32fd13 Signed-off-by: Daniel Gröber <dxld(a)darkboxed.org> --- M src/drivers/spi/macronix.c M src/drivers/spi/spi_flash.c M src/drivers/spi/spi_winbond.h M src/drivers/spi/winbond.c M src/include/spi_flash.h 5 files changed, 156 insertions(+), 222 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/23/42123/1 diff --git a/src/drivers/spi/macronix.c b/src/drivers/spi/macronix.c index 40f4a47..e5a7b98 100644 --- a/src/drivers/spi/macronix.c +++ b/src/drivers/spi/macronix.c @@ -316,64 +316,6 @@ return 0; } - -/* - * Read block protect bits from Status Reg. - * Converts block protection bits to a region. - * - * Returns: - * -1 on error - * 1 if region is covered by write protection - * 0 if a part of region isn't covered by write protection - */ -static int macronix_get_write_protection(const struct spi_flash *flash, - const struct region *region) -{ - const struct spi_flash_part_id *params; - struct region wp_region; - int ret; - - params = flash->part; - - if (!params) - return -1; - - if (!params->protection_granularity_shift) - return -1; - - struct spi_flash_bpbits bpbits = {}; - ret = macronix_get_bpbits(flash, params, &bpbits); - if (!ret) - return ret; - - ret = macronix_bpbits_to_region(flash, params, &bpbits, &wp_region); - if (!ret) - return ret; - - if (!region_sz(&wp_region)) { - printk(BIOS_DEBUG, "MACRONIX: flash isn't protected\n"); - return 0; - } - - printk(BIOS_DEBUG, "MACRONIX: flash protected range 0x%08zx-0x%08zx\n", - region_offset(&wp_region), region_end(&wp_region)); - - return region_is_subregion(&wp_region, region); -} - -/* - * Protect a region starting from start of flash or end of flash. - * The caller must provide a supported protected region size. - * Writes block protect bits to Status Reg. - * Optionally lock the status register if lock_sreg is set with the provided - * mode. - * - * @param flash: The flash to operate on - * @param region: The region to write protect - * @param mode: Optional status register lock-down mode - * - * @return 0 on success - */ static int macronix_set_bpbits(const struct spi_flash *flash, const struct spi_flash_part_id *params, const struct spi_flash_bpbits *bits) @@ -400,52 +342,12 @@ return 0; } - -static int -macronix_set_write_protection(const struct spi_flash *flash, - const struct region *region, - const enum spi_flash_status_reg_lockdown mode) -{ - const struct spi_flash_part_id *params; - int ret; - - printk(BIOS_DEBUG, "MACRONIX: want to set protection for" - " 0x%08zx-0x%08zx\n", region_offset(region), region_end(region)); - - params = flash->part; - - if (!params) - return -1; - - if (!params->protection_granularity_shift) { - printk(BIOS_ERR, "MACRONIX: ERROR: spi_flash part doesn't support block protection\n"); - return -1; - } - - struct spi_flash_bpbits bpbits = {}; - ret = macronix_get_bpbits(flash, params, &bpbits); - if (!ret) - return ret; - - ret = macronix_region_to_bpbits(flash, params, region, mode, &bpbits); - if (!ret) { - printk(BIOS_ERR, "MACRONIX: ERROR: unsupported block protection" - " region requested: 0x%08zx-0x%08zx\n", - region_offset(region), region_end(region)); - return ret; - } - - ret = macronix_set_bpbits(flash, params, &bpbits); - if (!ret) - return ret; - - return ret; -} - - static const struct spi_flash_protection_ops spi_flash_protection_ops = { - .get_write = macronix_get_write_protection, - .set_write = macronix_set_write_protection, + .get_bpbits = macronix_get_bpbits, + .set_bpbits = macronix_set_bpbits, + + .bpbits_to_region = macronix_bpbits_to_region, + .region_to_bpbits = macronix_region_to_bpbits, }; const struct spi_flash_vendor_info spi_flash_macronix_vi = { diff --git a/src/drivers/spi/spi_flash.c b/src/drivers/spi/spi_flash.c index 33416b5..e57076b 100644 --- a/src/drivers/spi/spi_flash.c +++ b/src/drivers/spi/spi_flash.c @@ -532,6 +532,50 @@ return -1; } +/* + * Read block protect bits from Status Reg and convert to a region. + * + * Returns: + * -1 on error + * 1 if region is covered by write protection + * 0 if a part of region isn't covered by write protection + */ +static int spi_flash_get_write_protection(const struct spi_flash *flash, + const struct region *region) +{ + const struct spi_flash_part_id *params; + struct spi_flash_bpbits bpbits = {}; + struct region wp_region; + int ret; + + params = flash->part; + if (!params) + return -1; + + if (!params->protection_granularity_shift) + return -1; + + ret = flash->prot_ops->get_bpbits(flash, params, &bpbits); + if (ret) + return ret; + + ret = flash->prot_ops->bpbits_to_region(flash, params, &bpbits, + &wp_region); + if (ret) + return ret; + + if (!region_sz(&wp_region)) { + printk(BIOS_DEBUG, "SPI: flash isn't write-protected\n"); + return 0; + } + + printk(BIOS_DEBUG, "SPI: flash write protected range:" + " 0x%08zx-0x%08zx\n", region_offset(&wp_region), + region_end(&wp_region)); + + return region_is_subregion(&wp_region, region); +} + int spi_flash_is_write_protected(const struct spi_flash *flash, const struct region *region) { @@ -551,7 +595,64 @@ return -1; } - return flash->prot_ops->get_write(flash, region); + return spi_flash_get_write_protection(flash, region); +} + +/* + * Protect a region starting from start of flash or end of flash. + * The caller must provide a supported protected region size. + * Writes block protect bits to Status Reg. + * Optionally lock the status register if appropriate mode is used. + * + * @param flash: The flash to operate on + * @param region: The region to write protect + * @param mode: Optional status register lock-down mode + * + * @return 0 on success + */ +static int spi_flash_set_write_protection( + const struct spi_flash *flash, + const struct region *region, + const enum spi_flash_status_reg_lockdown mode) +{ + const struct spi_flash_part_id *params; + int ret; + + printk(BIOS_DEBUG, "SPI: want to set protection for" + " 0x%08zx-0x%08zx\n", region_offset(region), region_end(region)); + + params = flash->part; + if (!params) + return -1; + + if (!params->protection_granularity_shift) { + printk(BIOS_ERR, "SPI: ERROR: flash part doesn't support block" + " protection\n"); + return -1; + } + + struct spi_flash_bpbits bpbits = {}; + ret = flash->prot_ops->get_bpbits(flash, params, &bpbits); + if (ret) + return ret; + + ret = flash->prot_ops->region_to_bpbits(flash, params, region, mode, + &bpbits); + if (ret) { + printk(BIOS_ERR, "SPI: ERROR: unsupported block protection" + " region requested: 0x%08zx-0x%08zx\n", + region_offset(region), region_end(region)); + return ret; + } + + ret = flash->prot_ops->set_bpbits(flash, params, &bpbits); + if (ret) + return ret; + + printk(BIOS_DEBUG, "SPI: write-protection range set to " + "0x%08zx-0x%08zx\n", region_offset(region), region_end(region)); + + return 0; } int spi_flash_set_write_protected(const struct spi_flash *flash, @@ -575,7 +676,7 @@ return -1; } - ret = flash->prot_ops->set_write(flash, region, mode); + ret = spi_flash_set_write_protection(flash, region, mode); if (ret == 0 && mode != SPI_WRITE_PROTECTION_PRESERVE) { printk(BIOS_INFO, "SPI: SREG lock-down was set to "); diff --git a/src/drivers/spi/spi_winbond.h b/src/drivers/spi/spi_winbond.h index 2a3a4ae..b4f455a8 100644 --- a/src/drivers/spi/spi_winbond.h +++ b/src/drivers/spi/spi_winbond.h @@ -29,7 +29,7 @@ const enum spi_flash_status_reg_lockdown mode, struct spi_flash_bpbits *bits); -void winbond_bpbits_to_region( +int winbond_bpbits_to_region( const struct spi_flash *flash, const struct spi_flash_part_id *params, const struct spi_flash_bpbits *bits, diff --git a/src/drivers/spi/winbond.c b/src/drivers/spi/winbond.c index d127287..9605279 100644 --- a/src/drivers/spi/winbond.c +++ b/src/drivers/spi/winbond.c @@ -219,10 +219,10 @@ * Convert BPx, TB and CMP to a region. * SEC (if available) must be zero. */ -void winbond_bpbits_to_region(const struct spi_flash *flash, - const struct spi_flash_part_id *params, - const struct spi_flash_bpbits *bits, - struct region *out) +int winbond_bpbits_to_region(const struct spi_flash *flash, + const struct spi_flash_part_id *params, + const struct spi_flash_bpbits *bits, + struct region *out) { const size_t granularity = 1 << params->protection_granularity_shift; size_t protected_size = @@ -244,46 +244,8 @@ out->offset = tb ? 0 : flash->size - protected_size; out->size = protected_size; } -} -/* - * Available on all devices. - * Read block protect bits from Status/Status2 Reg. - * Converts block protection bits to a region. - * - * Returns: - * -1 on error - * 1 if region is covered by write protection - * 0 if a part of region isn't covered by write protection - */ -static int winbond_get_write_protection(const struct spi_flash *flash, - const struct region *region) -{ - const struct spi_flash_part_id *params; - struct region wp_region; - struct spi_flash_bpbits bpbits; - int ret; - - params = flash->part; - if (!params) - return -1; - - ret = winbond_get_bpbits(flash, params, &bpbits); - if (ret) - return ret; - - winbond_bpbits_to_region(flash, params, &bpbits, &wp_region); - - if (!region_sz(&wp_region)) { - printk(BIOS_DEBUG, "WINBOND: flash isn't protected\n"); - - return 0; - } - - printk(BIOS_DEBUG, "WINBOND: flash protected range 0x%08zx-0x%08zx\n", - region_offset(&wp_region), region_end(&wp_region)); - - return region_is_subregion(&wp_region, region); + return 0; } static int winbond_get_bpbits(const struct spi_flash *flash, @@ -555,56 +517,12 @@ return 0; } -/* - * Available on all devices. - * Protect a region starting from start of flash or end of flash. - * The caller must provide a supported protected region size. - * SEC isn't supported and set to zero. - * Write block protect bits to Status/Status2 Reg. - * Optionally lock the status register if lock_sreg is set with the provided - * mode. - * - * @param flash: The flash to operate on - * @param region: The region to write protect - * @param mode: Optional status register lock-down mode - * - * @return 0 on success - */ -static int -winbond_set_write_protection(const struct spi_flash *flash, - const struct region *region, - const enum spi_flash_status_reg_lockdown mode) -{ - const struct spi_flash_part_id *params; - struct spi_flash_bpbits bpbits; - int ret; - - params = flash->part; - if (!params) - return -1; - - ret = winbond_get_bpbits(flash, params, &bpbits); - if (!ret) - return ret; - - ret = winbond_region_to_bpbits(flash, params, region, mode, &bpbits); - if (!ret) - return ret; - - - ret = winbond_set_bpbits(flash, params, &bpbits); - if (!ret) - return ret; - - printk(BIOS_DEBUG, "WINBOND: write-protection set to range " - "0x%08zx-0x%08zx\n", region_offset(region), region_end(region)); - - return ret; -} - static const struct spi_flash_protection_ops spi_flash_protection_ops = { - .get_write = winbond_get_write_protection, - .set_write = winbond_set_write_protection, + .get_bpbits = winbond_get_bpbits, + .set_bpbits = winbond_set_bpbits, + + .bpbits_to_region = winbond_bpbits_to_region, + .region_to_bpbits = winbond_region_to_bpbits, }; const struct spi_flash_vendor_info spi_flash_winbond_vi = { diff --git a/src/include/spi_flash.h b/src/include/spi_flash.h index fe62069..bf84ce0 100644 --- a/src/include/spi_flash.h +++ b/src/include/spi_flash.h @@ -85,37 +85,50 @@ }; }; +struct spi_flash_part_id; + /* Current code assumes all callbacks are supplied in this object. */ struct spi_flash_protection_ops { - /* - * Returns 1 if the whole region is software write protected. - * Hardware write protection mechanism aren't accounted. - * If the write protection could be changed, due to unlocked status - * register for example, 0 should be returned. - * Returns 0 on success. - */ - int (*get_write)(const struct spi_flash *flash, - const struct region *region); - /* - * Enable the status register write protection, if supported on the - * requested region, and optionally enable status register lock-down. - * Returns 0 if the whole region was software write protected. - * Hardware write protection mechanism aren't accounted. - * If the status register is locked and the requested configuration - * doesn't match the selected one, return an error. - * Only a single region is supported ! + + /** + * Read current block protection bits from device status registers. * - * @return 0 on success + * Returns non-zero on error, zero on success. */ - int - (*set_write)(const struct spi_flash *flash, + int (*get_bpbits)(const struct spi_flash *flash, + const struct spi_flash_part_id *part, + struct spi_flash_bpbits *bpbits); + /** + * Write block protection bits to non-volatile device status registers. + * + * Returns non-zero on error, zero on success. + */ + int (*set_bpbits)(const struct spi_flash *flash, + const struct spi_flash_part_id *part, + const struct spi_flash_bpbits *bpbits); + + /** + * Convert block protection bits to write-protected address region. + * + * Returns non-zero on error, zero on success. + */ + int (*bpbits_to_region)(const struct spi_flash *flash, + const struct spi_flash_part_id *part, + const struct spi_flash_bpbits *bpbits, + struct region *region); + /** + * Convert address region to be write-protected into block + * protection bits. + * + * Returns non-zero on error, zero on success. + */ + int (*region_to_bpbits)(const struct spi_flash *flash, + const struct spi_flash_part_id *part, const struct region *region, - const enum spi_flash_status_reg_lockdown mode); - + const enum spi_flash_status_reg_lockdown mode, + struct spi_flash_bpbits *bpbits); }; -struct spi_flash_part_id; - struct spi_flash { struct spi_slave spi; u8 vendor; -- To view, visit https://review.coreboot.org/c/coreboot/+/42123 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I509a1cedff5de4bee34b8856ce651d100a32fd13 Gerrit-Change-Number: 42123 Gerrit-PatchSet: 1 Gerrit-Owner: Daniel Gröber (dxld) Gerrit-Reviewer: Daniel Gröber <dxld(a)darkboxed.org> Gerrit-MessageType: newchange

2 2

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit January 2021