coreboot-gerrit July 2015

coreboot-gerrit@coreboot.org

1 participants
1048 discussions

Patch set updated for coreboot: gigabyte/ga-b75m-d3h: Mainboard boot fix
by Damien Zammit 14 Jul '15

14 Jul '15

Damien Zammit (damien(a)zamaudio.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10895 -gerrit commit 2e3dc1a96bc20d8b3e39d78ab1a5fd0166dd052e Author: Damien Zammit <damien(a)zamaudio.com> Date: Mon Jul 13 15:27:01 2015 +1000 gigabyte/ga-b75m-d3h: Mainboard boot fix This patch resolves all known outstanding issues with PCI device enumeration and getting the board to boot into GNU/Linux with VGA rom. (There was a bug in the devicetree). Tested on GA-B75M-D3H with VGA rom. Change-Id: Ide1f406652659e6f99ee5d993719c187650fffe4 Signed-off-by: Damien Zammit <damien(a)zamaudio.com> --- src/mainboard/gigabyte/ga-b75m-d3h/devicetree.cb | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/devicetree.cb b/src/mainboard/gigabyte/ga-b75m-d3h/devicetree.cb index 19a476c..f4a8664 100644 --- a/src/mainboard/gigabyte/ga-b75m-d3h/devicetree.cb +++ b/src/mainboard/gigabyte/ga-b75m-d3h/devicetree.cb @@ -24,7 +24,7 @@ chip northbridge/intel/sandybridge device pci 00.0 on # host bridge subsystemid 0x1458 0x5000 end - device pci 01.0 off end # PCIe Bridge for discrete graphics + device pci 01.0 on end # PCIe Bridge for discrete graphics device pci 02.0 on # vga controller subsystemid 0x1458 0xd000 end @@ -58,7 +58,7 @@ chip northbridge/intel/sandybridge device pci 1b.0 on # High Definition Audio subsystemid 0x1458 0xa002 end - device pci 1c.0 off end # PCIe Port #1 + device pci 1c.0 on end # PCIe Port #1 device pci 1c.1 off end # PCIe Port #2 device pci 1c.2 off end # PCIe Port #3 device pci 1c.3 off end # PCIe Port #4 @@ -92,17 +92,19 @@ chip northbridge/intel/sandybridge drq 0x74 = 4 end device pnp 2e.4 on # EC + io 0x60 = 0xa30 irq 0x70 = 9 + io 0x62 = 0xa20 end device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 irq 0x70 = 1 + io 0x62 = 0x64 end device pnp 2e.6 on # Mouse irq 0x70 = 12 end - device pnp 2e.7 on # GPIO - irq 0x70 = 0 - end + device pnp 2e.7 off end # GPIO device pnp 2e.a off end # IR end end

1 0

Patch merged into coreboot/master: buildgcc: Show the archive URL
by gerrit＠coreboot.org 14 Jul '15

14 Jul '15

the following patch was just integrated into master: commit b2ba3957e58355a14365c6140b1cde1436eb4092 Author: Paul Menzel <paulepanter(a)users.sourceforge.net> Date: Fri Jun 12 11:58:14 2015 +0200 buildgcc: Show the archive URL In case of downloading errors, the URL is handy for analyzing the cause. Change-Id: I6874cdc3c881cfdd52c80f80323536c30723654b Signed-off-by: Paul Menzel <paulepanter(a)users.sourceforge.net> Reviewed-on: http://review.coreboot.org/10853 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless(a)gmail.com> See http://review.coreboot.org/10853 for details. -gerrit

1 0

Patch merged into coreboot/master: amd/fam10: Add k10temp ACPI thermal zone mixin.
by gerrit＠coreboot.org 14 Jul '15

14 Jul '15

the following patch was just integrated into master: commit d5e6618a4f076610e683b174c4dd5108d960c785 Author: Tobias Diedrich <ranma+coreboot(a)tdiedrich.de> Date: Sun Jun 21 18:15:40 2015 +0200 amd/fam10: Add k10temp ACPI thermal zone mixin. This ACPI thermal zone is applicable to AMD family 10 to 14 (and some 15) CPUs. It should not be used on boards for which errata 319 (The thermal sensor of Socket F/AM2+ processors may be unreliable) is applicable. AM3 and later should be fine. Derived from src/northbridge/amd/amdk8/thermal_mixin.asl Change-Id: Id036cbf4cd717c3320a720edc452945df2b5e072 Signed-off-by: <ranma+coreboot(a)tdiedrich.de> Reviewed-on: http://review.coreboot.org/10617 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson(a)raptorengineeringinc.com> See http://review.coreboot.org/10617 for details. -gerrit

1 0

New patch to review for coreboot: AMD Family 0Fh: ensure CONFIG_CBB and CONFIG_CDB have sane values
by Jonathan A. Kollasch 14 Jul '15

14 Jul '15

Jonathan A. Kollasch (jakllsch(a)kollasch.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10913 -gerrit commit 0906f004495ee3e49bc187f19ee95c059ff5600f Author: Jonathan A. Kollasch <jakllsch(a)kollasch.net> Date: Mon Jul 13 21:13:33 2015 -0500 AMD Family 0Fh: ensure CONFIG_CBB and CONFIG_CDB have sane values (this probably fixes relocate_sb_ht_chain() on tyan/s2885) Change-Id: I5a26f4280b00bfb259c600048f6a7391a6c1268f Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> --- src/northbridge/amd/amdk8/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/src/northbridge/amd/amdk8/Kconfig b/src/northbridge/amd/amdk8/Kconfig index 21d3c29..dee7f8e 100644 --- a/src/northbridge/amd/amdk8/Kconfig +++ b/src/northbridge/amd/amdk8/Kconfig @@ -119,4 +119,12 @@ config IOMMU bool default y +config CBB + hex + default 0x00 + +config CDB + hex + default 0x18 + endif #NORTHBRIDGE_AMD_K8

1 0

New patch to review for coreboot: Fix corrupt SSDT table on multisocket AMD Family 0Fh systems
by Jonathan A. Kollasch 14 Jul '15

14 Jul '15

Jonathan A. Kollasch (jakllsch(a)kollasch.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10912 -gerrit commit d4345848b4dcdedc4c2cd4eb85e530c929678892 Author: Jonathan A. Kollasch <jakllsch(a)kollasch.net> Date: Mon Jul 13 21:03:10 2015 -0500 Fix corrupt SSDT table on multisocket AMD Family 0Fh systems Related-to: I3175c8b29e94a27a2db6b11f8fc9e1d91bde11f9 (ACPI: Fix corrupt SSDT table on multiprocessor AMD Family 10h systems) Change-Id: I0b5f265278d90cbaeddc6fc4432933856050f784 Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> --- src/northbridge/amd/amdk8/acpi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/src/northbridge/amd/amdk8/acpi.c b/src/northbridge/amd/amdk8/acpi.c index 10228cf..b253eb3 100644 --- a/src/northbridge/amd/amdk8/acpi.c +++ b/src/northbridge/amd/amdk8/acpi.c @@ -282,6 +282,11 @@ static void k8acpi_write_pci_data(int dlen, const char *name, int offset) { void k8acpi_write_vars(device_t device) { + static uint8_t ssdt_generated = 0; + if (ssdt_generated) + return; + ssdt_generated = 1; + msr_t msr; char pscope[] = "\\_SB.PCI0";

1 0

Patch set updated for coreboot: mainboard/intel: Add Skylake based Kunimitsu board
by Leroy P Leahy 14 Jul '15

14 Jul '15

Leroy P Leahy (leroy.p.leahy(a)intel.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10836 -gerrit commit 1b641c40de3ee182a40bc1f467cb614392d0bef9 Author: Lee Leahy <leroy.p.leahy(a)intel.com> Date: Mon Jun 29 11:37:56 2015 -0700 mainboard/intel: Add Skylake based Kunimitsu board Initial files to support the Kunimitsu board. This board uses the Skylake FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None TEST=Build and run ChromeOS on kunimitsu Change-Id: I1017a66bc811af51a0921e864b589ce2cb618082 Signed-off-by: Lee Leahy <leroy.p.leahy(a)intel.com> --- src/mainboard/intel/kunimitsu/Kconfig | 59 ++++++ src/mainboard/intel/kunimitsu/Kconfig.name | 2 + src/mainboard/intel/kunimitsu/Makefile.inc | 31 +++ src/mainboard/intel/kunimitsu/acpi/chromeos.asl | 24 +++ src/mainboard/intel/kunimitsu/acpi/ec.asl | 27 +++ src/mainboard/intel/kunimitsu/acpi/mainboard.asl | 137 +++++++++++++ src/mainboard/intel/kunimitsu/acpi/superio.asl | 28 +++ src/mainboard/intel/kunimitsu/acpi_tables.c | 62 ++++++ src/mainboard/intel/kunimitsu/chromeos.c | 73 +++++++ src/mainboard/intel/kunimitsu/cmos.layout | 140 +++++++++++++ src/mainboard/intel/kunimitsu/devicetree.cb | 130 ++++++++++++ src/mainboard/intel/kunimitsu/dsdt.asl | 57 ++++++ src/mainboard/intel/kunimitsu/ec.c | 55 +++++ src/mainboard/intel/kunimitsu/ec.h | 70 +++++++ src/mainboard/intel/kunimitsu/fadt.c | 52 +++++ src/mainboard/intel/kunimitsu/gpio.h | 222 +++++++++++++++++++++ src/mainboard/intel/kunimitsu/mainboard.c | 25 +++ src/mainboard/intel/kunimitsu/pei_data.c | 56 ++++++ src/mainboard/intel/kunimitsu/ramstage.c | 23 +++ src/mainboard/intel/kunimitsu/romstage.c | 76 +++++++ src/mainboard/intel/kunimitsu/smihandler.c | 147 ++++++++++++++ src/mainboard/intel/kunimitsu/spd/Makefile.inc | 41 ++++ src/mainboard/intel/kunimitsu/spd/empty.spd.hex | 16 ++ .../spd/samsung_dimm_K4E8E304EE-EGCE.spd.hex | 16 ++ src/mainboard/intel/kunimitsu/spd/spd.c | 118 +++++++++++ src/mainboard/intel/kunimitsu/spd/spd.h | 37 ++++ src/mainboard/intel/kunimitsu/thermal.h | 36 ++++ 27 files changed, 1760 insertions(+) diff --git a/src/mainboard/intel/kunimitsu/Kconfig b/src/mainboard/intel/kunimitsu/Kconfig new file mode 100644 index 0000000..ec8b52a --- /dev/null +++ b/src/mainboard/intel/kunimitsu/Kconfig @@ -0,0 +1,59 @@ +if BOARD_INTEL_KUNIMITSU + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select BOARD_ROMSIZE_KB_16384 + select CACHE_ROM + select CHROMEOS + select CHROMEOS_RAMOOPS_DYNAMIC + select CHROMEOS_VBNV_CMOS + select EC_GOOGLE_CHROMEEC + select EC_GOOGLE_CHROMEEC_LPC + select EC_GOOGLE_CHROMEEC_MEC + select EC_GOOGLE_CHROMEEC_ACPI_MEMMAP +# select EC_SOFTWARE_SYNC + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_SMI_HANDLER + select INTEL_PCH_UART_CONSOLE + select LID_SWITCH + select MAINBOARD_HAS_CHROMEOS +# select MAINBOARD_HAS_LPC_TPM + select MARK_GRAPHICS_MEM_WRCOMB + select MMCONF_SUPPORT + select MONOTONIC_TIMER_MSR + select SOC_INTEL_SKYLAKE +# select VBOOT_EC_SLOW_UPDATE + select VBOOT_OPROM_MATTERS + select VIRTUAL_DEV_SWITCH + +config IRQ_SLOT_COUNT + int + default 18 + +config BOOT_MEDIA_SPI_BUS + hex + default 0 + +config INTEL_PCH_UART_CONSOLE_NUMBER + hex + default 2 + +config MAINBOARD_DIR + string + default "intel/kunimitsu" + +config MAINBOARD_PART_NUMBER + string + default "Kunimitsu" + +config MAX_CPUS + int + default 8 + +config VBOOT_RAMSTAGE_INDEX + hex + default 0x3 + +endif diff --git a/src/mainboard/intel/kunimitsu/Kconfig.name b/src/mainboard/intel/kunimitsu/Kconfig.name new file mode 100644 index 0000000..24f70ea --- /dev/null +++ b/src/mainboard/intel/kunimitsu/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_INTEL_KUNIMITSU + bool "Kunimitsu" diff --git a/src/mainboard/intel/kunimitsu/Makefile.inc b/src/mainboard/intel/kunimitsu/Makefile.inc new file mode 100644 index 0000000..da996a5 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/Makefile.inc @@ -0,0 +1,31 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## Copyright (C) 2015 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc. +## + +subdirs-y += spd + +romstage-y += pei_data.c + +romstage-$(CONFIG_CHROMEOS) += chromeos.c +ramstage-$(CONFIG_CHROMEOS) += chromeos.c +ramstage-$(CONFIG_EC_GOOGLE_CHROMEEC) += ec.c +ramstage-y += mainboard.c +ramstage-y += pei_data.c +ramstage-y += ramstage.c +smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c diff --git a/src/mainboard/intel/kunimitsu/acpi/chromeos.asl b/src/mainboard/intel/kunimitsu/acpi/chromeos.asl new file mode 100644 index 0000000..c6665f9 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/acpi/chromeos.asl @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +Name (OIPG, Package() { + Package () { 0x0001, 0, 0xFFFFFFFF, "INT3437:00" }, // no recovery button + Package () { 0x0003, 1, 16, "INT3437:00" }, // firmware write protect +}) diff --git a/src/mainboard/intel/kunimitsu/acpi/ec.asl b/src/mainboard/intel/kunimitsu/acpi/ec.asl new file mode 100644 index 0000000..9ef2553 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/acpi/ec.asl @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* mainboard configuration */ +#include <mainboard/intel/kunimitsu/ec.h> + +/* Enable EC backed PD MCU device in ACPI */ +#define EC_ENABLE_PD_MCU_DEVICE + +/* ACPI code for EC functions */ +#include <ec/google/chromeec/acpi/ec.asl> diff --git a/src/mainboard/intel/kunimitsu/acpi/mainboard.asl b/src/mainboard/intel/kunimitsu/acpi/mainboard.asl new file mode 100644 index 0000000..a5e7bcf --- /dev/null +++ b/src/mainboard/intel/kunimitsu/acpi/mainboard.asl @@ -0,0 +1,137 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#define KUNIMITSU_TRACKPAD_IRQ 0x33 +#define KUNIMITSU_TOUCH_IRQ 0x1f + +#define BOARD_TRACKPAD_NAME "trackpad" +#define BOARD_TRACKPAD_IRQ KUNIMITSU_TRACKPAD_IRQ +#define BOARD_TRACKPAD_I2C_BUS 1 +#define BOARD_TRACKPAD_I2C_ADDR 0x15 + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ KUNIMITSU_TOUCH_IRQ +#define BOARD_TOUCHSCREEN_I2C_BUS 0 +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4b + +Scope (\_SB) +{ + Device (LID0) + { + Name (_HID, EisaId("PNP0C0D")) + Method (_LID, 0) + { + Return (\_SB.PCI0.LPCB.EC0.LIDS) + } + } + + Device (PWRB) + { + Name(_HID, EisaId("PNP0C0C")) + } +} +/* + * LPC Trusted Platform Module + */ +Scope (\_SB.PCI0.LPCB) +{ + #include <drivers/pc80/tpm/acpi/tpm.asl> +} +Scope (\_SB.PCI0.I2C0) +{ + Device (ATSB) + { + Name (_HID, "ATML0001") + Name (_DDN, "Atmel Touchscreen Bootloader") + Name (_UID, 4) + Name (_S0W, 4) + Name (ISTP, 0) /* TouchScreen */ + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + 0x27, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C0", // ResourceSource + ) + Interrupt (ResourceConsumer, Edge, ActiveLow) { 28 } + }) + Method (_STA) + { + Return (0xF) + } + } + Device (ATSA) + { + Name (_HID, "ATML0001") + Name (_DDN, "Atmel Touchscreen") + Name (_UID, 5) + Name (_S0W, 4) + Name (ISTP, 0) /* TouchScreen */ + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + BOARD_TOUCHSCREEN_I2C_ADDR, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C0", // ResourceSource + ) + Interrupt (ResourceConsumer, Edge, ActiveLow) + { + BOARD_TOUCHSCREEN_IRQ + } + }) + Method (_STA, 0, NotSerialized) + { + Return (0xF) + } + } +} +Scope (\_SB.PCI0.I2C1) +{ + Device (ELAN) + { + Name (_HID, "ELAN0000") + Name (_DDN, "Elan Touchpad") + Name (_UID, 3) + Name (_S0W, 4) + Name (ISTP, 1) /* TouchPad */ + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + BOARD_TRACKPAD_I2C_ADDR, /* SlaveAddress */ + ControllerInitiated, /* SlaveMode */ + 400000, /* ConnectionSpeed */ + AddressingMode7Bit, /* AddressingMode */ + "\\_SB.PCI0.I2C1", /* ResourceSource */ + ) + Interrupt (ResourceConsumer, Edge, ActiveLow) + { + KUNIMITSU_TRACKPAD_IRQ + } + }) + Method (_STA) + { + Return (0xF) + } + } +} diff --git a/src/mainboard/intel/kunimitsu/acpi/superio.asl b/src/mainboard/intel/kunimitsu/acpi/superio.asl new file mode 100644 index 0000000..747991e --- /dev/null +++ b/src/mainboard/intel/kunimitsu/acpi/superio.asl @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* mainboard configuration */ +#include <mainboard/intel/kunimitsu/ec.h> + +#define SIO_EC_MEMMAP_ENABLE // EC Memory Map Resources +#define SIO_EC_HOST_ENABLE // EC Host Interface Resources +#define SIO_EC_ENABLE_PS2K // Enable PS/2 Keyboard + +/* ACPI code for EC SuperIO functions */ +#include <ec/google/chromeec/acpi/superio.asl> diff --git a/src/mainboard/intel/kunimitsu/acpi_tables.c b/src/mainboard/intel/kunimitsu/acpi_tables.c new file mode 100644 index 0000000..f9eb7b0 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/acpi_tables.c @@ -0,0 +1,62 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <soc/acpi.h> +#include <soc/nvs.h> +#include "thermal.h" + +extern const unsigned char AmlCode[]; + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + acpi_init_gnvs(gnvs); + + /* Disable USB ports in S5 */ + gnvs->s5u0 = 0; + + gnvs->tmps = TEMPERATURE_SENSOR_ID; + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; + gnvs->tmax = MAX_TEMPERATURE; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + return acpi_madt_irq_overrides(current); +} diff --git a/src/mainboard/intel/kunimitsu/chromeos.c b/src/mainboard/intel/kunimitsu/chromeos.c new file mode 100644 index 0000000..4447a6c --- /dev/null +++ b/src/mainboard/intel/kunimitsu/chromeos.c @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <soc/gpio.h> +#include <string.h> +#include <vendorcode/google/chromeos/chromeos.h> + +#if ENV_RAMSTAGE +#include <boot/coreboot_tables.h> + +#define GPIO_COUNT 6 + +void fill_lb_gpios(struct lb_gpios *gpios) +{ + struct lb_gpio *gpio; + + gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); + gpios->count = GPIO_COUNT; + + gpio = gpios->gpios; + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "recovery", + get_recovery_mode_switch()); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "developer", + get_developer_mode_switch()); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "lid", + get_lid_switch()); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "power", 0); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "oprom", gfx_get_init_done()); +} +#endif /* ENV_RAMSTAGE */ + +int get_lid_switch(void) +{ + /* Default to force open */ + return 1; +} + +/* The dev-switch is virtual */ +int get_developer_mode_switch(void) +{ + return 0; +} + +int get_recovery_mode_switch(void) +{ + return 0; +} + +int get_write_protect_state(void) +{ + return 0; +} diff --git a/src/mainboard/intel/kunimitsu/cmos.layout b/src/mainboard/intel/kunimitsu/cmos.layout new file mode 100644 index 0000000..32bf05d --- /dev/null +++ b/src/mainboard/intel/kunimitsu/cmos.layout @@ -0,0 +1,140 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2015 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc. +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv +#544 440 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 + + diff --git a/src/mainboard/intel/kunimitsu/devicetree.cb b/src/mainboard/intel/kunimitsu/devicetree.cb new file mode 100644 index 0000000..d9622cc --- /dev/null +++ b/src/mainboard/intel/kunimitsu/devicetree.cb @@ -0,0 +1,130 @@ +chip soc/intel/skylake + + # SerialIO device modes + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoPci, \ + [PchSerialIoIndexI2C1] = PchSerialIoPci, \ + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C4] = PchSerialIoPci, \ + [PchSerialIoIndexI2C5] = PchSerialIoPci, \ + [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart0] = PchSerialIoPci, \ + [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart2] = PchSerialIoLegacyUart, \ + }" + + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # EC range is 0x800-0x9ff + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x00fc0901" + + # EC_SMI + register "ec_smi_gpio" = "34" + register "alt_gp_smi_en" = "0x0400" + register "gpe0_en_1" = "0x00000000" + + # EC_SCI is GPIO36 + register "gpe0_en_2" = "0x00000010" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" + + # Memory related + register "IedSize" = "0x0" + register "ProbelessTrace" = "0" + + # Lan + register "EnableLan" = "0" + + # SATA related + register "EnableSata" = "1" + register "SataSalpSupport" = "1" + register "SataMode" = "2" + register "SataPortsEnable[0]" = "1" + register "SsicPortEnable" = "0" + + # Audio related + register "EnableAzalia" = "1" + register "EnableTraceHub" = "0" + register "DspEnable" = "1" + + # I/O Buffer Ownership: + # 0: HD-A Link + # 1 Shared, HD-A Link and I2S Port + # 3: I2S Ports + register "IoBufferOwnership" = "3" + + # SMBUS + register "SmbusEnable" = "1" + + # Camera + register "Cio2Enable" = "0" + + # eMMC + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "ScsSdCardEnabled" = "2" + + # Integrated Sensor + register "IshEnable" = "0" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + # Refered from SKL EDS Vol 1 : Page No: 31-32 + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB 3.0 xHCI Controller + device pci 14.1 on end # USB Device Controller (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C Controller #0 + device pci 15.1 on end # I2C Controller #1 + device pci 15.2 on end # I2C Controller #2 + device pci 15.3 on end # I2C Controller #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE Redirection (IDE-R) + device pci 16.3 off end # Management Engine Keyboard and Text (KT) Redirection + device pci 16.4 off end # Management Engine Intel MEI #3 + device pci 17.0 on end # SATA Controller + device pci 19.0 on end # UART Controller #2 + device pci 19.1 on end # I2C Controller #5 + device pci 19.2 on end # I2C Controller #4 + device pci 1c.0 off end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 on end # UART #1 + device pci 1e.2 on end # SPI #0 + device pci 1e.4 on end # eMMC + device pci 1e.6 on end # SDCard + device pci 1f.0 on + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC Interface + device pci 1f.3 on end # Intel High Definition Audio (Intel HD Audio) (Audio, Voice, Speech) + device pci 1f.4 off end # SMBus Controller + device pci 1f.5 on end # SPI + device pci 1f.6 off end # GbE Controller + end +end diff --git a/src/mainboard/intel/kunimitsu/dsdt.asl b/src/mainboard/intel/kunimitsu/dsdt.asl new file mode 100644 index 0000000..6ac0be4 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/dsdt.asl @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x05, // DSDT revision: ACPI v5.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include <soc/intel/skylake/acpi/platform.asl> + + // global NVS and variables + #include <soc/intel/skylake/acpi/globalnvs.asl> + + // CPU + #include <soc/intel/skylake/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <soc/intel/skylake/acpi/systemagent.asl> + #include <soc/intel/skylake/acpi/pch.asl> + } + } + + // Chrome OS specific + #include "acpi/chromeos.asl" + #include <vendorcode/google/chromeos/acpi/chromeos.asl> + + // Chipset specific sleep states + #include <soc/intel/skylake/acpi/sleepstates.asl> + + // Mainboard specific + #include "acpi/mainboard.asl" +} diff --git a/src/mainboard/intel/kunimitsu/ec.c b/src/mainboard/intel/kunimitsu/ec.c new file mode 100644 index 0000000..c491ad5 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/ec.c @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <arch/acpi.h> +#include <console/console.h> +#include <ec/google/chromeec/ec.h> +#include "ec.h" + +void mainboard_ec_init(void) +{ + printk(BIOS_DEBUG, "mainboard_ec_init\n"); + post_code(0xf0); + + /* Restore SCI event mask on resume. */ + if (acpi_slp_type == 3) { + google_chromeec_log_events(MAINBOARD_EC_LOG_EVENTS | + MAINBOARD_EC_S3_WAKE_EVENTS); + + /* Disable SMI and wake events */ + google_chromeec_set_smi_mask(0); + + /* Clear pending events */ + while (google_chromeec_get_event() != 0) + ; + /* + * Set SCI mask.OS may not generate SMI event to set + * this on S3 resume. + */ + google_chromeec_set_sci_mask(MAINBOARD_EC_SCI_EVENTS); + } else { + google_chromeec_log_events(MAINBOARD_EC_LOG_EVENTS | + MAINBOARD_EC_S5_WAKE_EVENTS); + } + + /* Clear wake event mask */ + google_chromeec_set_wake_mask(0); + post_code(0xf1); +} diff --git a/src/mainboard/intel/kunimitsu/ec.h b/src/mainboard/intel/kunimitsu/ec.h new file mode 100644 index 0000000..9da9d9f --- /dev/null +++ b/src/mainboard/intel/kunimitsu/ec.h @@ -0,0 +1,70 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#ifndef MAINBOARD_EC_H +#define MAINBOARD_EC_H + +#include <ec/google/chromeec/ec_commands.h> + +/* GPP_E16 is EC_SCI_L */ +#define EC_SCI_GPI 16 /* TODO: Update this */ +/* GPP_E15 is EC_SMI_L */ +#define EC_SMI_GPI 15 /* TODO: Update this */ + +#define MAINBOARD_EC_SCI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_STATUS) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_OVERLOAD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_START) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_STOP) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_CHARGER) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU)) + +#define MAINBOARD_EC_SMI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED)) + +/* EC can wake from S5 with lid or power button */ +#define MAINBOARD_EC_S5_WAKE_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) + +/* EC can wake from S3 with lid or power button or key press */ +#define MAINBOARD_EC_S3_WAKE_EVENTS \ + (MAINBOARD_EC_S5_WAKE_EVENTS |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED)) + +/* Log EC wake events plus EC shutdown events */ +#define MAINBOARD_EC_LOG_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_SHUTDOWN)|\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PANIC)) + +#ifndef __ACPI__ +extern void mainboard_ec_init(void); +#endif + +#endif diff --git a/src/mainboard/intel/kunimitsu/fadt.c b/src/mainboard/intel/kunimitsu/fadt.c new file mode 100644 index 0000000..83a0d36 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/fadt.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <string.h> +#include <soc/acpi.h> + +void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 5; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + acpi_fill_in_fadt(fadt); + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/intel/kunimitsu/gpio.h b/src/mainboard/intel/kunimitsu/gpio.h new file mode 100644 index 0000000..e81ad51 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/gpio.h @@ -0,0 +1,222 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#ifndef _GPIO_H_ +#define _GPIO_H_ + +#include <soc/gpio.h> + +const GPIO_INIT_CONFIG GpioTableKunimitsu[] = { +{GPIO_LP_GPP_A0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioTermNone}}, +{GPIO_LP_GPP_A3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B2, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntEdge, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B3, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, (GpioIntApic|GpioIntLevel), GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B15, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutLow, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B16, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntEdge, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B17, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C3, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutLow,GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C6, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C7, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh,GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C11, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutLow,GpioIntDis, GpioResetDeep, GpioTermWpd20K}}, +{GPIO_LP_GPP_C12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C13, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C14, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C15, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_C22, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh,GpioIntDis, GpioResetDeep, GpioTermWpd20K}}, +{GPIO_LP_GPP_C23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermWpu20K}}, +{GPIO_LP_GPP_D10, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutLow,GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_D11, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutLow,GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_D14, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntEdge, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_D17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_D18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_D19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_D20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_D23, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E0, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntEdge, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E7, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, (GpioIntApic|GpioIntLevel), GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E15, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntEdge, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E16, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntEdge, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh,GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F10, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, + GpioOutDefault, GpioIntApic | GpioIntEdge, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirInOut, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntEdge, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPD1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPD2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntEdge, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPD3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPD4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPD5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPD8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirOut, + GpioOutLow,GpioIntDis, GpioResetDeep, GpioTermNone}}, +{END_OF_GPIO_TABLE, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +}; +#endif diff --git a/src/mainboard/intel/kunimitsu/mainboard.c b/src/mainboard/intel/kunimitsu/mainboard.c new file mode 100644 index 0000000..5c5bd69 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/mainboard.c @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <device/device.h> + +struct chip_operations mainboard_ops = { +}; diff --git a/src/mainboard/intel/kunimitsu/pei_data.c b/src/mainboard/intel/kunimitsu/pei_data.c new file mode 100644 index 0000000..e8d7562 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/pei_data.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <stdint.h> +#include <string.h> +#include <soc/pei_data.h> +#include <soc/pei_wrapper.h> + +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + /* DQ byte map for kunimitsu board */ + const u8 dq_map[2][12] = { + {0x0F, 0xF0 , 0x00, 0xF0 , 0x0F, 0xF0 , + 0x0F, 0x00 , 0xFF, 0x00 , 0xFF, 0x00}, + {0x33, 0xCC , 0x00, 0xCC , 0x33, 0xCC , + 0x33, 0x00 , 0xFF, 0x00 , 0xFF, 0x00} }; + /* DQS CPU<>DRAM map for sklrvp board */ + const u8 dqs_map[2][8] = { + {0, 1, 3, 2, 4, 5, 6, 7}, + {1, 0, 4, 5, 2, 3, 6, 7} }; + + /* Rcomp resistor*/ + const u16 RcompResistor[3] = {200, 81, 162 }; + + /* Rcomp target*/ + const u16 RcompTarget[5] = {100, 40, 40, 23, 40}; + + pei_data->ec_present = 1; + /* One installed DIMM per channel */ + pei_data->dimm_channel0_disabled = 2; + pei_data->dimm_channel1_disabled = 2; + + memcpy(pei_data->dq_map, dq_map, sizeof(dq_map)); + memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map)); + memcpy(pei_data->RcompResistor, RcompResistor, + sizeof(RcompResistor)); + memcpy(pei_data->RcompTarget, RcompTarget, + sizeof(RcompTarget)); +} diff --git a/src/mainboard/intel/kunimitsu/ramstage.c b/src/mainboard/intel/kunimitsu/ramstage.c new file mode 100644 index 0000000..f9b2764 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/ramstage.c @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "gpio.h" +#include <soc/ramstage.h> + +void mainboard_silicon_init_params(SILICON_INIT_UPD *params) +{ + /*update gpio table*/ + params->GpioTablePtr = (UINT32 *)GpioTableKunimitsu; +} diff --git a/src/mainboard/intel/kunimitsu/romstage.c b/src/mainboard/intel/kunimitsu/romstage.c new file mode 100644 index 0000000..c0d7aec --- /dev/null +++ b/src/mainboard/intel/kunimitsu/romstage.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <cbfs.h> +#include <console/console.h> +#include <string.h> +#include <ec/google/chromeec/ec.h> +#include <soc/cpu.h> +#include <soc/gpio.h> +#include <soc/pei_data.h> +#include <soc/pei_wrapper.h> +#include <soc/pm.h> +#include <soc/romstage.h> +#include "spd/spd.h" + +void mainboard_romstage_entry(struct romstage_params *params) +{ + post_code(0x31); + /* Fill out PEI DATA */ + mainboard_fill_pei_data(params->pei_data); + mainboard_fill_spd_data(params->pei_data); + /* Initliaze memory */ + romstage_common(params); +} + +void mainboard_memory_init_params( + struct romstage_params *params, + MEMORY_INIT_UPD *memory_params) +{ + if (params->pei_data->spd_data[0][0][0] != 0) { + memory_params->MemorySpdPtr00 = + (UINT32)(params->pei_data->spd_data[0][0]); + memory_params->MemorySpdPtr10 = + (UINT32)(params->pei_data->spd_data[1][0]); + printk(BIOS_SPEW, "0x%08x: SpdDataBuffer_0_0\n", + memory_params->MemorySpdPtr00); + printk(BIOS_SPEW, "0x%08x: SpdDataBuffer_0_1\n", + memory_params->MemorySpdPtr01); + printk(BIOS_SPEW, "0x%08x: SpdDataBuffer_1_0\n", + memory_params->MemorySpdPtr10); + printk(BIOS_SPEW, "0x%08x: SpdDataBuffer_1_1\n", + memory_params->MemorySpdPtr11); + } + memcpy(memory_params->DqByteMapCh0, params->pei_data->dq_map[0], + sizeof(params->pei_data->dq_map[0])); + memcpy(memory_params->DqByteMapCh1, params->pei_data->dq_map[1], + sizeof(params->pei_data->dq_map[1])); + memcpy(memory_params->DqsMapCpu2DramCh0, params->pei_data->dqs_map[0], + sizeof(params->pei_data->dqs_map[0])); + memcpy(memory_params->DqsMapCpu2DramCh1, params->pei_data->dqs_map[1], + sizeof(params->pei_data->dqs_map[1])); + memcpy(memory_params->RcompResistor, params->pei_data->RcompResistor, + sizeof(params->pei_data->RcompResistor)); + memcpy(memory_params->RcompTarget, params->pei_data->RcompTarget, + sizeof(params->pei_data->RcompTarget)); + memory_params->MemorySpdDataLen = SPD_LEN; + memory_params->DqPinsInterleaved = FALSE; +} diff --git a/src/mainboard/intel/kunimitsu/smihandler.c b/src/mainboard/intel/kunimitsu/smihandler.c new file mode 100644 index 0000000..0529ba1 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/smihandler.c @@ -0,0 +1,147 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2015 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <elog.h> +#include <ec/google/chromeec/ec.h> +#include <soc/iomap.h> +#include <soc/nvs.h> +#include <soc/pm.h> +#include <soc/smm.h> +#include "ec.h" + +int mainboard_io_trap_handler(int smif) +{ + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + smm_get_gnvs()->smif = 0; + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + return 1; +} + +static u8 mainboard_smi_ec(void) +{ + u8 cmd = 0; +#if IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC) + u32 pm1_cnt; + cmd = google_chromeec_get_event(); + + /* Log this event */ + if (IS_ENABLED(CONFIG_ELOG_GSMI) && cmd) + elog_add_event_byte(ELOG_TYPE_EC_EVENT, cmd); + + switch (cmd) { + case EC_HOST_EVENT_LID_CLOSED: + printk(BIOS_DEBUG, "LID CLOSED, SHUTDOWN\n"); + + /* Go to S5 */ + pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); + pm1_cnt |= (0xf << 10); + outl(pm1_cnt, ACPI_BASE_ADDRESS + PM1_CNT); + break; + } +#endif + return cmd; +} + +/* gpi_sts is GPIO 47:32 */ +void mainboard_smi_gpi(u32 gpi_sts) +{ + if (gpi_sts & (1 << EC_SMI_GPI)) { + /* Process all pending events */ + while (mainboard_smi_ec() != 0) + ; + } +} + +void mainboard_smi_sleep(u8 slp_typ) +{ +#if IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC) + /* Disable USB charging if required */ + switch (slp_typ) { + case 3: + if (smm_get_gnvs()->s3u0 == 0) { + google_chromeec_set_usb_charge_mode( + 0, USB_CHARGE_MODE_DISABLED); + google_chromeec_set_usb_charge_mode( + 1, USB_CHARGE_MODE_DISABLED); + } + + /* Enable wake events */ + google_chromeec_set_wake_mask(MAINBOARD_EC_S3_WAKE_EVENTS); + break; + case 5: + if (smm_get_gnvs()->s5u0 == 0) { + google_chromeec_set_usb_charge_mode( + 0, USB_CHARGE_MODE_DISABLED); + google_chromeec_set_usb_charge_mode( + 1, USB_CHARGE_MODE_DISABLED); + } + + /* Enable wake events */ + google_chromeec_set_wake_mask(MAINBOARD_EC_S5_WAKE_EVENTS); + break; + } + + /* Disable SCI and SMI events */ + google_chromeec_set_smi_mask(0); + google_chromeec_set_sci_mask(0); + + /* Clear pending events that may trigger immediate wake */ + while (google_chromeec_get_event() != 0) + ; +#endif +} + +int mainboard_smi_apmc(u8 apmc) +{ +#if IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC) + switch (apmc) { + case APM_CNT_ACPI_ENABLE: + google_chromeec_set_smi_mask(0); + /* Clear all pending events */ + while (google_chromeec_get_event() != 0) + ; + google_chromeec_set_sci_mask(MAINBOARD_EC_SCI_EVENTS); + break; + case APM_CNT_ACPI_DISABLE: + google_chromeec_set_sci_mask(0); + /* Clear all pending events */ + while (google_chromeec_get_event() != 0) + ; + google_chromeec_set_smi_mask(MAINBOARD_EC_SMI_EVENTS); + break; + } +#endif + return 0; +} diff --git a/src/mainboard/intel/kunimitsu/spd/Makefile.inc b/src/mainboard/intel/kunimitsu/spd/Makefile.inc new file mode 100644 index 0000000..c50252f --- /dev/null +++ b/src/mainboard/intel/kunimitsu/spd/Makefile.inc @@ -0,0 +1,41 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2014 Google Inc. +## Copyright (C) 2015 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc. +## + +romstage-y += spd.c + +SPD_BIN = $(obj)/spd.bin + +# SPD data by index. No method for board identification yet +SPD_SOURCES = samsung_dimm_K4E8E304EE-EGCE # 0 +SPD_SOURCES += empty # 1 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd rom data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/intel/kunimitsu/spd/empty.spd.hex b/src/mainboard/intel/kunimitsu/spd/empty.spd.hex new file mode 100644 index 0000000..9ec39f1 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/spd/empty.spd.hex @@ -0,0 +1,16 @@ +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/intel/kunimitsu/spd/samsung_dimm_K4E8E304EE-EGCE.spd.hex b/src/mainboard/intel/kunimitsu/spd/samsung_dimm_K4E8E304EE-EGCE.spd.hex new file mode 100644 index 0000000..5291046 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/spd/samsung_dimm_K4E8E304EE-EGCE.spd.hex @@ -0,0 +1,16 @@ +91 20 F1 03 04 11 05 0B 03 11 01 08 0A 00 50 01 +78 78 90 50 90 11 50 E0 10 04 3C 3C 01 90 00 00 +00 00 00 00 00 00 00 A8 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 55 00 00 00 00 00 +20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 +20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/intel/kunimitsu/spd/spd.c b/src/mainboard/intel/kunimitsu/spd/spd.c new file mode 100644 index 0000000..cdcbe1e --- /dev/null +++ b/src/mainboard/intel/kunimitsu/spd/spd.c @@ -0,0 +1,118 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <arch/byteorder.h> +#include <cbfs.h> +#include <console/console.h> +#include <string.h> +#include <soc/gpio.h> +#include <soc/pei_data.h> +#include <soc/romstage.h> +#include <ec/google/chromeec/ec.h> +#include <mainboard/intel/kunimitsu/spd/spd.h> + +static void mainboard_print_spd_info(uint8_t spd[]) +{ + const int spd_banks[8] = { 8, 16, 32, 64, -1, -1, -1, -1 }; + const int spd_capmb[8] = { 1, 2, 4, 8, 16, 32, 64, 0 }; + const int spd_rows[8] = { 12, 13, 14, 15, 16, -1, -1, -1 }; + const int spd_cols[8] = { 9, 10, 11, 12, -1, -1, -1, -1 }; + const int spd_ranks[8] = { 1, 2, 3, 4, -1, -1, -1, -1 }; + const int spd_devw[8] = { 4, 8, 16, 32, -1, -1, -1, -1 }; + const int spd_busw[8] = { 8, 16, 32, 64, -1, -1, -1, -1 }; + char spd_name[SPD_PART_LEN+1] = { 0 }; + + int banks = spd_banks[(spd[SPD_DENSITY_BANKS] >> 4) & 7]; + int capmb = spd_capmb[spd[SPD_DENSITY_BANKS] & 7] * 256; + int rows = spd_rows[(spd[SPD_ADDRESSING] >> 3) & 7]; + int cols = spd_cols[spd[SPD_ADDRESSING] & 7]; + int ranks = spd_ranks[(spd[SPD_ORGANIZATION] >> 3) & 7]; + int devw = spd_devw[spd[SPD_ORGANIZATION] & 7]; + int busw = spd_busw[spd[SPD_BUS_DEV_WIDTH] & 7]; + + /* Module type */ + printk(BIOS_INFO, "SPD: module type is "); + switch (spd[SPD_DRAM_TYPE]) { + case SPD_DRAM_DDR3: + printk(BIOS_INFO, "DDR3\n"); + break; + case SPD_DRAM_LPDDR3: + printk(BIOS_INFO, "LPDDR3\n"); + break; + default: + printk(BIOS_INFO, "Unknown (%02x)\n", spd[SPD_DRAM_TYPE]); + break; + } + + /* Module Part Number */ + memcpy(spd_name, &spd[SPD_PART_OFF], SPD_PART_LEN); + spd_name[SPD_PART_LEN] = 0; + printk(BIOS_INFO, "SPD: module part is %s\n", spd_name); + + printk(BIOS_INFO, + "SPD: banks %d, ranks %d, rows %d, columns %d, density %d Mb\n", + banks, ranks, rows, cols, capmb); + printk(BIOS_INFO, "SPD: device width %d bits, bus width %d bits\n", + devw, busw); + + if (capmb > 0 && busw > 0 && devw > 0 && ranks > 0) { + /* SIZE = DENSITY / 8 * BUS_WIDTH / SDRAM_WIDTH * RANKS */ + printk(BIOS_INFO, "SPD: module size is %u MB (per channel)\n", + capmb / 8 * busw / devw * ranks); + } +} + +/* Copy SPD data for on-board memory */ +void mainboard_fill_spd_data(struct pei_data *pei_data) +{ + char *spd_file; + size_t spd_file_len; + int spd_index; + + /* Load SPD data from CBFS */ + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (!spd_file) + die("SPD data not found."); + + /* make sure we have at least one SPD in the file. */ + if (spd_file_len < SPD_LEN) + die("Missing SPD data."); + + /* Add board SKU detection here. Currently we only support one. */ + spd_index = 0; + + /* Make sure we did not overrun the buffer */ + if (spd_file_len < ((spd_index + 1) * SPD_LEN)) { + printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n"); + spd_index = 0; + } + + /* Assume same memory in both channels */ + spd_index *= SPD_LEN; + memcpy(pei_data->spd_data[0][0], spd_file + spd_index, SPD_LEN); + memcpy(pei_data->spd_data[1][0], spd_file + spd_index, SPD_LEN); + + /* Make sure a valid SPD was found */ + if (pei_data->spd_data[0][0][0] == 0) + die("Invalid SPD data."); + + mainboard_print_spd_info(pei_data->spd_data[0][0]); +} diff --git a/src/mainboard/intel/kunimitsu/spd/spd.h b/src/mainboard/intel/kunimitsu/spd/spd.h new file mode 100644 index 0000000..18d4e68 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/spd/spd.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#ifndef _MAINBOARD_SPD_H_ +#define _MAINBOARD_SPD_H_ + +#define SPD_LEN 256 + +#define SPD_DRAM_TYPE 2 +#define SPD_DRAM_DDR3 0x0b +#define SPD_DRAM_LPDDR3 0xf1 +#define SPD_DENSITY_BANKS 4 +#define SPD_ADDRESSING 5 +#define SPD_ORGANIZATION 7 +#define SPD_BUS_DEV_WIDTH 8 +#define SPD_PART_OFF 128 +#define SPD_PART_LEN 18 + + +#endif /* _MAINBOARD_SPD_H_ */ diff --git a/src/mainboard/intel/kunimitsu/thermal.h b/src/mainboard/intel/kunimitsu/thermal.h new file mode 100644 index 0000000..41ce631 --- /dev/null +++ b/src/mainboard/intel/kunimitsu/thermal.h @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#ifndef _MAINBOARD_THERMAL_H_ +#define _MAINBOARD_THERMAL_H_ + +#define TEMPERATURE_SENSOR_ID 0 /* PECI */ + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 104 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 95 + +/* Tj_max value for calculating PECI CPU temperature */ +/* Tj_max can be read by MSR 0x1A2, BITS[23:16] */ +#define MAX_TEMPERATURE 100 + +#endif /* _MAINBOARD_THERMAL_H_ */

1 0

Patch set updated for coreboot: mainboard/intel: Add Skylake based RVP3 board
by Leroy P Leahy 14 Jul '15

14 Jul '15

Leroy P Leahy (leroy.p.leahy(a)intel.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10343 -gerrit commit be2b7c4ea1c64747b01985d42d1558eae7d00a8b Author: Lee Leahy <leroy.p.leahy(a)intel.com> Date: Tue May 12 18:25:25 2015 -0700 mainboard/intel: Add Skylake based RVP3 board Initial files to support the Intel Skylake RVP3 This board uses the Skylake FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None TEST=Build and run on sklrvp Change-Id: I5e7fff8f62a737e627e25c1e03e343d6167041ea Signed-off-by: Lee Leahy <leroy.p.leahy(a)intel.com> --- src/mainboard/intel/sklrvp/Kconfig | 56 ++++ src/mainboard/intel/sklrvp/Kconfig.name | 2 + src/mainboard/intel/sklrvp/Makefile.inc | 28 ++ src/mainboard/intel/sklrvp/acpi/chromeos.asl | 24 ++ src/mainboard/intel/sklrvp/acpi/ec.asl | 18 ++ src/mainboard/intel/sklrvp/acpi/mainboard.asl | 241 +++++++++++++++++ src/mainboard/intel/sklrvp/acpi/superio.asl | 18 ++ src/mainboard/intel/sklrvp/acpi_tables.c | 62 +++++ src/mainboard/intel/sklrvp/chromeos.c | 74 ++++++ src/mainboard/intel/sklrvp/cmos.layout | 140 ++++++++++ src/mainboard/intel/sklrvp/devicetree.cb | 160 ++++++++++++ src/mainboard/intel/sklrvp/dsdt.asl | 53 ++++ src/mainboard/intel/sklrvp/fadt.c | 52 ++++ src/mainboard/intel/sklrvp/gpio_rvp3.h | 355 ++++++++++++++++++++++++++ src/mainboard/intel/sklrvp/mainboard.c | 25 ++ src/mainboard/intel/sklrvp/onboard.h | 37 +++ src/mainboard/intel/sklrvp/pei_data.c | 58 +++++ src/mainboard/intel/sklrvp/ramstage.c | 27 ++ src/mainboard/intel/sklrvp/romstage.c | 84 ++++++ src/mainboard/intel/sklrvp/spd/Makefile.inc | 41 +++ src/mainboard/intel/sklrvp/spd/empty.spd.hex | 16 ++ src/mainboard/intel/sklrvp/spd/rvp3.spd.hex | 16 ++ src/mainboard/intel/sklrvp/spd/spd.c | 118 +++++++++ src/mainboard/intel/sklrvp/spd/spd.h | 37 +++ src/mainboard/intel/sklrvp/thermal.h | 35 +++ 25 files changed, 1777 insertions(+) diff --git a/src/mainboard/intel/sklrvp/Kconfig b/src/mainboard/intel/sklrvp/Kconfig new file mode 100644 index 0000000..7e96b87 --- /dev/null +++ b/src/mainboard/intel/sklrvp/Kconfig @@ -0,0 +1,56 @@ +if BOARD_INTEL_SKLRVP + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select BOARD_ROMSIZE_KB_16384 + select CACHE_ROM + select CHROMEOS + select CHROMEOS_RAMOOPS_DYNAMIC + select CHROMEOS_VBNV_CMOS + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_SMI_HANDLER + select INTEL_PCH_UART_CONSOLE + select LID_SWITCH + select MAINBOARD_HAS_CHROMEOS + select MARK_GRAPHICS_MEM_WRCOMB + select MMCONF_SUPPORT + select MONOTONIC_TIMER_MSR + select SOC_INTEL_SKYLAKE + select VBOOT_DYNAMIC_WORK_BUFFER + select VIRTUAL_DEV_SWITCH + +config IRQ_SLOT_COUNT + int + default 18 + +config BOOT_MEDIA_SPI_BUS + hex + default 0 + +config INTEL_PCH_UART_CONSOLE_NUMBER + hex + default 2 + +config MAINBOARD_DIR + string + default "intel/sklrvp" + +config MAINBOARD_PART_NUMBER + string + default "Skylake RVP3" + +config MAINBOARD_VENDOR + string + default "Intel" + +config MAX_CPUS + int + default 8 + +config VBOOT_RAMSTAGE_INDEX + hex + default 0x3 + +endif diff --git a/src/mainboard/intel/sklrvp/Kconfig.name b/src/mainboard/intel/sklrvp/Kconfig.name new file mode 100644 index 0000000..c970f01 --- /dev/null +++ b/src/mainboard/intel/sklrvp/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_INTEL_SKLRVP + bool "Skylake RVP3" diff --git a/src/mainboard/intel/sklrvp/Makefile.inc b/src/mainboard/intel/sklrvp/Makefile.inc new file mode 100644 index 0000000..266a92d --- /dev/null +++ b/src/mainboard/intel/sklrvp/Makefile.inc @@ -0,0 +1,28 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## Copyright (C) 2015 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc. +## + +subdirs-y += spd + +romstage-$(CONFIG_MAINBOARD_HAS_CHROMEOS) += chromeos.c +romstage-y += pei_data.c + +ramstage-$(CONFIG_MAINBOARD_HAS_CHROMEOS) += chromeos.c +ramstage-y += pei_data.c +ramstage-y += ramstage.c diff --git a/src/mainboard/intel/sklrvp/acpi/chromeos.asl b/src/mainboard/intel/sklrvp/acpi/chromeos.asl new file mode 100644 index 0000000..c6665f9 --- /dev/null +++ b/src/mainboard/intel/sklrvp/acpi/chromeos.asl @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +Name (OIPG, Package() { + Package () { 0x0001, 0, 0xFFFFFFFF, "INT3437:00" }, // no recovery button + Package () { 0x0003, 1, 16, "INT3437:00" }, // firmware write protect +}) diff --git a/src/mainboard/intel/sklrvp/acpi/ec.asl b/src/mainboard/intel/sklrvp/acpi/ec.asl new file mode 100644 index 0000000..9cfe6a6 --- /dev/null +++ b/src/mainboard/intel/sklrvp/acpi/ec.asl @@ -0,0 +1,18 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ diff --git a/src/mainboard/intel/sklrvp/acpi/mainboard.asl b/src/mainboard/intel/sklrvp/acpi/mainboard.asl new file mode 100644 index 0000000..9fc8131 --- /dev/null +++ b/src/mainboard/intel/sklrvp/acpi/mainboard.asl @@ -0,0 +1,241 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* REAKTEK Audio Jack Interrupt */ +#define GPIO_SKL_LP_GPP_E22 0x02040016 + +#include <mainboard/intel/sklrvp/onboard.h> + +/* + * LPC Trusted Platform Module + */ +Scope (\_SB.PCI0.LPCB) +{ + #include <drivers/pc80/tpm/acpi/tpm.asl> +} + +/* + * WLAN connected to Root Port 3, becomes Root Port 1 after coalesce + */ +Scope (\_SB.PCI0.RP01) +{ + Device (WLAN) + { + Name (_ADR, 0x00000000) + + /* GPIO10 is PCH_WLAN_WAKE_L */ + Name (GPIO, 10) + + Name (_PRW, Package() { GPIO, 3 }) + + Method (_DSW, 3, NotSerialized) + { + If (LEqual (Arg0, 1)) { + // Enable GPIO as wake source + \_SB.PCI0.LPCB.GPIO.GWAK (^GPIO) + } + } + } +} + +Scope (\_SB.PCI0.I2C0) +{ + Device (ETPA) + { + Name (_HID, "SYN2393") + Name (_CID, "PNP0C50") + Name (_DDN, "Synaptic Touchpad") + Name (_UID, 3) + Name (ISTP, 1) /* Touchpad */ + + /* Fetch HidDescriptorAddress, Register offset in the + * I2C device at which the HID descriptor can be read + */ + Method (_DSM, 4, NotSerialized) + { + If (LEqual (Arg0, ToUUID ( + "3cdff6f7-4267-4555-ad05-b30a3d8938de"))) + { + If (LEqual (Arg2, Zero)) + { + If (LEqual (Arg1, One)) + { + Return (Buffer (One) + { + 0x03 + }) + } + Else + { + Return (Buffer (One) + { + 0x00 + }) + } + } + If (LEqual (Arg2, One)) + { + Return (0x20) + } + } + Else + { + Return (Buffer (One) + { + 0x00 + }) + } + + Return (Zero) + } + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + BOARD_TOUCHPAD_I2C_ADDR, /* SlaveAddress */ + ControllerInitiated, /* SlaveMode */ + 400000, /* ConnectionSpeed */ + AddressingMode7Bit, /* AddressingMode */ + "\\_SB.PCI0.I2C0", /* ResourceSource */ + ) + Interrupt (ResourceConsumer, Level, ActiveLow) + { BOARD_TOUCHPAD_IRQ } + }) + } + + //----------------------------------- + // HD Audio I2S Codec device + // Realtek ALC286S (I2SC = 2) + //----------------------------------- + Device (HDAC) + { + Name (_HID, "INT343A") + Name (_CID, "INT343A") + Name (_DDN, "Intel(R) Smart Sound Technology Audio Codec") + Name (_UID, 1) + + Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings + { + /* update Audio codec slave address in runtime */ + Name (RBUF, ResourceTemplate () + { + I2cSerialBus (0x1C, ControllerInitiated, 400000, + AddressingMode7Bit, "\\_SB.PCI0.I2C0", + 0x00, ResourceConsumer, ,) + }) + + /* update interrupt number in runtime */ + Name (SBFI, ResourceTemplate () + { + Interrupt (ResourceConsumer, Level, ActiveLow, + ExclusiveAndWake, ,, _Y22) + { + 0x00000000, + } + }) + + /* _INT: Interrupts */ + CreateDWordField (SBFI, _Y22._INT, INT2) + + Store (INUM (GPIO_SKL_LP_GPP_E22), INT2) + + Return (ConcatenateResTemplate (RBUF, SBFI)) + } + + Method (_STA, 0, NotSerialized) + { + Return (0xF) /* I2S Codec Enabled */ + } + } +} + +Scope (\_SB.PCI0.I2C1) +{ + Device (ATSA) + { + Name (_HID, "ATML3432") + Name (_DDN, "Atmel Touchscreen") + Name (_UID, 5) + Name (_S0W, 4) + Name (ISTP, 0) /* TouchScreen */ + Name (_CID, "PNP0C50") + + /* Fetch HidDescriptorAddress, Register offset in the + * I2C device at which the HID descriptor can be read + */ + Method (_DSM, 4, NotSerialized) + { + If (LEqual (Arg0, ToUUID ( + "3cdff6f7-4267-4555-ad05-b30a3d8938de"))) + { + If (LEqual (Arg2, Zero)) + { + If (LEqual (Arg1, One)) + { + Return (Buffer (One) + { + 0x03 + }) + } + Else + { + Return (Buffer (One) + { + 0x00 + }) + } + } + + If (LEqual (Arg2, One)) + { + Return (Zero) + } + } + Else + { + Return (Buffer (One) + { + 0x00 + }) + } + + Return (Zero) + } + + Name (_CRS, ResourceTemplate() + { + I2cSerialBus ( + BOARD_TOUCHSCREEN_I2C_ADDR, // SlaveAddress + ControllerInitiated, // SlaveMode + 400000, // ConnectionSpeed + AddressingMode7Bit, // AddressingMode + "\\_SB.PCI0.I2C1", // ResourceSource + ) + + Interrupt (ResourceConsumer, Level, ActiveLow) + { BOARD_TOUCHSCREEN_IRQ } + }) + + Method (_STA, 0, NotSerialized) + { + Return (0xF) + } + } +} diff --git a/src/mainboard/intel/sklrvp/acpi/superio.asl b/src/mainboard/intel/sklrvp/acpi/superio.asl new file mode 100644 index 0000000..9cfe6a6 --- /dev/null +++ b/src/mainboard/intel/sklrvp/acpi/superio.asl @@ -0,0 +1,18 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ diff --git a/src/mainboard/intel/sklrvp/acpi_tables.c b/src/mainboard/intel/sklrvp/acpi_tables.c new file mode 100644 index 0000000..f9eb7b0 --- /dev/null +++ b/src/mainboard/intel/sklrvp/acpi_tables.c @@ -0,0 +1,62 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <soc/acpi.h> +#include <soc/nvs.h> +#include "thermal.h" + +extern const unsigned char AmlCode[]; + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + acpi_init_gnvs(gnvs); + + /* Disable USB ports in S5 */ + gnvs->s5u0 = 0; + + gnvs->tmps = TEMPERATURE_SENSOR_ID; + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; + gnvs->tmax = MAX_TEMPERATURE; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + return acpi_madt_irq_overrides(current); +} diff --git a/src/mainboard/intel/sklrvp/chromeos.c b/src/mainboard/intel/sklrvp/chromeos.c new file mode 100644 index 0000000..b361888 --- /dev/null +++ b/src/mainboard/intel/sklrvp/chromeos.c @@ -0,0 +1,74 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <rules.h> +#include <soc/gpio.h> +#include <string.h> +#include <vendorcode/google/chromeos/chromeos.h> + +#if ENV_RAMSTAGE +#include <boot/coreboot_tables.h> + +#define GPIO_COUNT 6 + +void fill_lb_gpios(struct lb_gpios *gpios) +{ + struct lb_gpio *gpio; + + gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); + gpios->count = GPIO_COUNT; + + gpio = gpios->gpios; + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "recovery", + get_recovery_mode_switch()); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "developer", + get_developer_mode_switch()); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "lid", + get_lid_switch()); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "power", 0); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "oprom", gfx_get_init_done()); +} +#endif /* ENV_RAMSTAGE */ + +int get_lid_switch(void) +{ + /* Default to force open */ + return 1; +} + +/* The dev-switch is virtual */ +int get_developer_mode_switch(void) +{ + return 0; +} + +int get_recovery_mode_switch(void) +{ + return 0; +} + +int get_write_protect_state(void) +{ + return 0; +} diff --git a/src/mainboard/intel/sklrvp/cmos.layout b/src/mainboard/intel/sklrvp/cmos.layout new file mode 100644 index 0000000..32bf05d --- /dev/null +++ b/src/mainboard/intel/sklrvp/cmos.layout @@ -0,0 +1,140 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2015 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc. +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv +#544 440 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 + + diff --git a/src/mainboard/intel/sklrvp/devicetree.cb b/src/mainboard/intel/sklrvp/devicetree.cb new file mode 100644 index 0000000..cb6415b --- /dev/null +++ b/src/mainboard/intel/sklrvp/devicetree.cb @@ -0,0 +1,160 @@ +chip soc/intel/skylake + + # SerialIO device modes + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoPci, \ + [PchSerialIoIndexI2C1] = PchSerialIoPci, \ + [PchSerialIoIndexI2C2] = PchSerialIoPci, \ + [PchSerialIoIndexI2C3] = PchSerialIoPci, \ + [PchSerialIoIndexI2C4] = PchSerialIoPci, \ + [PchSerialIoIndexI2C5] = PchSerialIoPci, \ + [PchSerialIoIndexSpi0] = PchSerialIoPci, \ + [PchSerialIoIndexSpi1] = PchSerialIoPci, \ + [PchSerialIoIndexUart0] = PchSerialIoPci, \ + [PchSerialIoIndexUart1] = PchSerialIoPci, \ + [PchSerialIoIndexUart2] = PchSerialIoLegacyUart, \ + }" + + # Enable eDP Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable DDI1 Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + # Enable DDI2 Hotplug with 6ms pulse + register "gpu_dp_c_hotplug" = "0x06" + + # Set backlight PWM values for eDP + register "gpu_cpu_backlight" = "0x00000200" + register "gpu_pch_backlight" = "0x04000000" + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "6" # 500ms + register "gpu_panel_power_up_delay" = "2000" # 200ms + register "gpu_panel_power_down_delay" = "500" # 50ms + register "gpu_panel_power_backlight_on_delay" = "2000" # 200ms + register "gpu_panel_power_backlight_off_delay" = "2000" # 200ms + + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # EC range is 0x800-0x9ff + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x00fc0901" + + # EC_SMI + register "ec_smi_gpio" = "34" + register "alt_gp_smi_en" = "0x0400" + register "gpe0_en_1" = "0x00000000" + # EC_SCI is GPIO36 + register "gpe0_en_2" = "0x00000010" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" + + # Force enable ASPM for PCIe Port 3 + register "pcie_port_force_aspm" = "0x04" + register "pcie_port_coalesce" = "1" + + # Disable PCIe CLKOUT 1-5 and CLKOUT_XDP + register "icc_clock_disable" = "0x013b0000" + + # Enable S0ix + register "s0ix_enable" = "0" + + # Memory related + register "IedSize" = "0x0" + + # Probeless Trace function + register "ProbelessTrace" = "0" + + # Lan + register "EnableLan" = "0" + + # SATA related + register "EnableSata" = "1" + register "SataSalpSupport" = "1" + register "SataMode" = "2" + register "SataPortsEnable[0]" = "1" + + # Audio related + register "EnableAzalia" = "1" + register "EnableTraceHub" = "0" + register "DspEnable" = "1" + + # I/O Buffer Ownership: + # 0: HD-A Link + # 1 Shared, HD-A Link and I2S Port + # 3: I2S Ports + register "IoBufferOwnership" = "3" + + # USB related + register "SsicPortEnable" = "0" + + # SMBUS + register "SmbusEnable" = "1" + + # Camera + register "Cio2Enable" = "0" + + # eMMC + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "2" + + # Integrated Sensor + register "IshEnable" = "0" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + # Refered from SKL EDS Vol 1 : Page No: 31-32 + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB 3.0 xHCI Controller + device pci 14.1 on end # USB Device Controller (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C Controller #0 + device pci 15.1 on end # I2C Controller #1 + device pci 15.2 on end # I2C Controller #2 + device pci 15.3 on end # I2C Controller #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE Redirection (IDE-R) + device pci 16.3 off end # Management Engine Keyboard and Text (KT) Redirection + device pci 16.4 off end # Management Engine Intel MEI #3 + device pci 17.0 on end # SATA Controller + device pci 19.0 on end # UART Controller #2 + device pci 19.1 on end # I2C Controller #5 + device pci 19.2 on end # I2C Controller #4 + device pci 1c.0 off end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 on end # UART #1 + device pci 1e.2 on end # SPI #0 + device pci 1e.4 on end # eMMC + device pci 1e.6 on end # SDCard + device pci 1f.0 on end # LPC Interface (eSPI Enable Strap = 0) eSPI Interface (eSPI Enable Strap = 1) + device pci 1f.3 on end # Intel High Definition Audio (Intel HD Audio) (Audio, Voice, Speech) + device pci 1f.4 off end # SMBus Controller + device pci 1f.5 on end # SPI + device pci 1f.6 off end # GbE Controller + end +end diff --git a/src/mainboard/intel/sklrvp/dsdt.asl b/src/mainboard/intel/sklrvp/dsdt.asl new file mode 100644 index 0000000..8a8164a --- /dev/null +++ b/src/mainboard/intel/sklrvp/dsdt.asl @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include <soc/intel/skylake/acpi/platform.asl> + + // global NVS and variables + #include <soc/intel/skylake/acpi/globalnvs.asl> + + // CPU + #include <soc/intel/skylake/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <soc/intel/skylake/acpi/systemagent.asl> + #include <soc/intel/skylake/acpi/pch.asl> + } + } + + // Chipset specific sleep states + #include <soc/intel/skylake/acpi/sleepstates.asl> + + // Mainboard specific + #include "acpi/mainboard.asl" +} diff --git a/src/mainboard/intel/sklrvp/fadt.c b/src/mainboard/intel/sklrvp/fadt.c new file mode 100644 index 0000000..83a0d36 --- /dev/null +++ b/src/mainboard/intel/sklrvp/fadt.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <string.h> +#include <soc/acpi.h> + +void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 5; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + acpi_fill_in_fadt(fadt); + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/intel/sklrvp/gpio_rvp3.h b/src/mainboard/intel/sklrvp/gpio_rvp3.h new file mode 100644 index 0000000..b4daa11 --- /dev/null +++ b/src/mainboard/intel/sklrvp/gpio_rvp3.h @@ -0,0 +1,355 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ +#ifndef _GPIORVP3_H_ +#define _GPIORVP3_H_ + +#include <soc/gpio.h> + +static const GPIO_INIT_CONFIG GpioTableRvp3[] = { +{GPIO_LP_GPP_A8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermWpd20K}}, +{GPIO_LP_GPP_A11, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntApic, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_A12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_A15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermWpd20K}}, +{GPIO_LP_GPP_A16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_A17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_A18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_A19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_A20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_A21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_A22, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_A23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntApic, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_B0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B3, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntApic, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_B4, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B5, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntApic, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_B11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_B12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_B13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_B14, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermWpd20K}}, +{GPIO_LP_GPP_B15, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutLow, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B16, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, + GpioOutDefault, GpioIntLevel | GpioIntSci, GpioResetNormal, + GpioTermNone}}, +{GPIO_LP_GPP_B17, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, + GpioOutDefault, GpioIntEdge | GpioIntSci, GpioResetDeep, + GpioTermWpd20K}}, +{GPIO_LP_GPP_B18, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, + GpioOutDefault, GpioIntLevel | GpioIntSci, GpioResetNormal, + GpioTermWpu20K}}, +{GPIO_LP_GPP_B19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_B20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermWpd20K}}, +{GPIO_LP_GPP_B21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermWpd20K}}, +{GPIO_LP_GPP_B22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermWpd20K}}, +{GPIO_LP_GPP_B23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermWpd20K}}, +{GPIO_LP_GPP_C0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermWpd20K}}, +{GPIO_LP_GPP_C2, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermWpd20K}}, +{GPIO_LP_GPP_C3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C5, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, + GpioOutDefault, GpioIntLevel | GpioIntApic, GpioResetDeep, + GpioTermWpd20K}}, +{GPIO_LP_GPP_C6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermWpd20K}}, +{GPIO_LP_GPP_C8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_C23, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D9, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntDis, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_D10, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntDis, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_D11, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntDis, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_D12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntDis, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_D13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_D23, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E0, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, + GpioOutDefault, GpioIntEdge | GpioIntApic, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_E1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E2, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntLvlEdgDis | GpioIntApic, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_E3, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInOut, + GpioOutLow, GpioIntLevel | GpioIntDis, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_E4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E6, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutLow, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_E7, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntApic, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_E9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntDis, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_E13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E15, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, + GpioOutDefault, GpioIntEdge | GpioIntSmi, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_E16, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, + GpioOutDefault, GpioIntLevel | GpioIntSci, GpioResetNormal, + GpioTermNone}}, +{GPIO_LP_GPP_E17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermWpd20K}}, +{GPIO_LP_GPP_E20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_E21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermWpd20K}}, +{GPIO_LP_GPP_E22, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, + GpioOutDefault, GpioIntLevel | GpioIntApic, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_E23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, + GpioOutHigh, GpioIntDis, GpioResetDeep, GpioTermWpd20K}}, +{GPIO_LP_GPP_F0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_F1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_F2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_F3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_F4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, + GpioTolerance1v8 | GpioTermNone}}, +{GPIO_LP_GPP_F5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, + GpioTolerance1v8 | GpioTermNone}}, +{GPIO_LP_GPP_F6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, + GpioTolerance1v8 | GpioTermNone}}, +{GPIO_LP_GPP_F7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, + GpioTolerance1v8 | GpioTermNone}}, +{GPIO_LP_GPP_F8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, + GpioTolerance1v8 | GpioTermNone}}, +{GPIO_LP_GPP_F9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, + GpioTolerance1v8 | GpioTermNone}}, +{GPIO_LP_GPP_F10, {GpioPadModeNative2, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, + GpioTolerance1v8 | GpioTermNone}}, +{GPIO_LP_GPP_F11, {GpioPadModeNative2, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, + GpioTolerance1v8 | GpioTermNone}}, +{GPIO_LP_GPP_F12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_F13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_F14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_F15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_F16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_F17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep,GpioTermNone}}, +{GPIO_LP_GPP_F18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_F23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntApic, GpioResetDeep, + GpioTermNone}}, +{GPIO_LP_GPP_G0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPP_G7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetDeep, GpioTermNone}}, +{GPIO_LP_GPD0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +{GPIO_LP_GPD1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +{GPIO_LP_GPD2, {GpioPadModeNative1, GpioHostOwnAcpi, GpioDirIn, + GpioOutDefault, GpioIntLevel | GpioIntSci, GpioResetPwrGood, + GpioTermNone}}, +{GPIO_LP_GPD3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermWpu20K}}, +{GPIO_LP_GPD4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +{GPIO_LP_GPD5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +{GPIO_LP_GPD6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +{GPIO_LP_GPD7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +{GPIO_LP_GPD8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +{GPIO_LP_GPD9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +{GPIO_LP_GPD10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +{GPIO_LP_GPD11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +{END_OF_GPIO_TABLE, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirNone, + GpioOutDefault, GpioIntDis, GpioResetPwrGood, GpioTermNone}}, +}; +#endif diff --git a/src/mainboard/intel/sklrvp/mainboard.c b/src/mainboard/intel/sklrvp/mainboard.c new file mode 100644 index 0000000..5c5bd69 --- /dev/null +++ b/src/mainboard/intel/sklrvp/mainboard.c @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <device/device.h> + +struct chip_operations mainboard_ops = { +}; diff --git a/src/mainboard/intel/sklrvp/onboard.h b/src/mainboard/intel/sklrvp/onboard.h new file mode 100644 index 0000000..10a19b3 --- /dev/null +++ b/src/mainboard/intel/sklrvp/onboard.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ONBOARD_H +#define ONBOARD_H + +/* + * Gpio based irq for touchpad, 18th index in North Bank + * MAX_DIRECT_IRQ + GPSW_SIZE + 19 + */ +#define SKLRVP_TOUCHPAD_IRQ 33 + +#define SKLRVP_TOUCH_IRQ 31 + +#define BOARD_TOUCHPAD_NAME "touchpad" +#define BOARD_TOUCHPAD_IRQ SKLRVP_TOUCHPAD_IRQ +#define BOARD_TOUCHPAD_I2C_BUS 0 +#define BOARD_TOUCHPAD_I2C_ADDR 0x20 + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ SKLRVP_TOUCH_IRQ +#define BOARD_TOUCHSCREEN_I2C_BUS 0 +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4c + +#endif diff --git a/src/mainboard/intel/sklrvp/pei_data.c b/src/mainboard/intel/sklrvp/pei_data.c new file mode 100644 index 0000000..6c42f28 --- /dev/null +++ b/src/mainboard/intel/sklrvp/pei_data.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <stdint.h> +#include <string.h> +#include <soc/gpio.h> +#include <soc/pei_data.h> +#include <soc/pei_wrapper.h> + +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + + /* DQ byte map for sklrvp board */ + const u8 dq_map[2][12] = { + {0x0F, 0xF0 , 0x00, 0xF0 , 0x0F, 0xF0 , + 0x0F, 0x00 , 0xFF, 0x00 , 0xFF, 0x00}, + {0x33, 0xCC , 0x00, 0xCC , 0x33, 0xCC , + 0x33, 0x00 , 0xFF, 0x00 , 0xFF, 0x00} }; + /* DQS CPU<>DRAM map for sklrvp board */ + const u8 dqs_map[2][8] = { + {0, 1, 3, 2, 4, 5, 6, 7}, + {1, 0, 4, 5, 2, 3, 6, 7} }; + + /* Rcomp resistor*/ + const u16 RcompResistor[3] = {200, 81, 162 }; + + /* Rcomp target*/ + const u16 RcompTarget[5] = {100, 40, 40, 23, 40}; + + pei_data->ec_present = 1; + /* One installed DIMM per channel */ + pei_data->dimm_channel0_disabled = 2; + pei_data->dimm_channel1_disabled = 2; + + memcpy(pei_data->dq_map, dq_map, sizeof(dq_map)); + memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map)); + memcpy(pei_data->RcompResistor, RcompResistor, + sizeof(RcompResistor)); + memcpy(pei_data->RcompTarget, RcompTarget, + sizeof(RcompTarget)); +} diff --git a/src/mainboard/intel/sklrvp/ramstage.c b/src/mainboard/intel/sklrvp/ramstage.c new file mode 100644 index 0000000..c2cd08f --- /dev/null +++ b/src/mainboard/intel/sklrvp/ramstage.c @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include "gpio_rvp3.h" +#include <soc/ramstage.h> + +void mainboard_silicon_init_params(SILICON_INIT_UPD *params) +{ + /*update gpio table*/ + params->GpioTablePtr = (UINT32 *)GpioTableRvp3; +} diff --git a/src/mainboard/intel/sklrvp/romstage.c b/src/mainboard/intel/sklrvp/romstage.c new file mode 100644 index 0000000..aaa8b8d --- /dev/null +++ b/src/mainboard/intel/sklrvp/romstage.c @@ -0,0 +1,84 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <cbfs.h> +#include <console/console.h> +#include <string.h> +#include <ec/google/chromeec/ec.h> +#include <soc/cpu.h> +#include <soc/gpio.h> +#include <soc/pei_data.h> +#include <soc/pei_wrapper.h> +#include <soc/pm.h> +#include <soc/romstage.h> +#include "spd/spd.h" + +void mainboard_romstage_entry(struct romstage_params *params) +{ + post_code(0x31); + /* Fill out PEI DATA */ + mainboard_fill_pei_data(params->pei_data); + mainboard_fill_spd_data(params->pei_data); + /* Initliaze memory */ + romstage_common(params); +} + +void mainboard_memory_init_params( + struct romstage_params *params, + MEMORY_INIT_UPD *memory_params) +{ + /* Get SPD data passing strucutre and initialize it.*/ + if (params->pei_data->spd_data[0][0][0] != 0) { + memory_params->MemorySpdPtr00 = + (UINT32)(params->pei_data->spd_data[0][0]); + memory_params->MemorySpdPtr10 = + (UINT32)(params->pei_data->spd_data[1][0]); + printk(BIOS_SPEW, "0x%08x: SpdDataBuffer_0_0\n", + memory_params->MemorySpdPtr00); + printk(BIOS_SPEW, "0x%08x: SpdDataBuffer_0_1\n", + memory_params->MemorySpdPtr01); + printk(BIOS_SPEW, "0x%08x: SpdDataBuffer_1_0\n", + memory_params->MemorySpdPtr10); + printk(BIOS_SPEW, "0x%08x: SpdDataBuffer_1_1\n", + memory_params->MemorySpdPtr11); + } + /* + * Configure the DQ/DQS settings if required. In general the settings + * should be set in the FSP flash image and should not need to be + * changed. + */ + memcpy(memory_params->DqByteMapCh0, params->pei_data->dq_map[0], + sizeof(params->pei_data->dq_map[0])); + memcpy(memory_params->DqByteMapCh1, params->pei_data->dq_map[1], + sizeof(params->pei_data->dq_map[1])); + memcpy(memory_params->DqsMapCpu2DramCh0, params->pei_data->dqs_map[0], + sizeof(params->pei_data->dqs_map[0])); + memcpy(memory_params->DqsMapCpu2DramCh1, params->pei_data->dqs_map[1], + sizeof(params->pei_data->dqs_map[1])); + memcpy(memory_params->RcompResistor, params->pei_data->RcompResistor, + sizeof(params->pei_data->RcompResistor)); + memcpy(memory_params->RcompTarget, params->pei_data->RcompTarget, + sizeof(params->pei_data->RcompTarget)); + + /* update spd length*/ + memory_params->MemorySpdDataLen = SPD_LEN; + memory_params->DqPinsInterleaved = FALSE; +} diff --git a/src/mainboard/intel/sklrvp/spd/Makefile.inc b/src/mainboard/intel/sklrvp/spd/Makefile.inc new file mode 100644 index 0000000..d7877aa --- /dev/null +++ b/src/mainboard/intel/sklrvp/spd/Makefile.inc @@ -0,0 +1,41 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2014 Google Inc. +## Copyright (C) 2015 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc. +## + +romstage-y += spd.c + +SPD_BIN = $(obj)/spd.bin + +# SPD data by index. No method for board identification yet +SPD_SOURCES = rvp3 # 0 +SPD_SOURCES += empty # 1 + +SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) + +# Include spd rom data +$(SPD_BIN): $(SPD_DEPS) + for f in $+; \ + do for c in $$(cat $$f | grep -v ^#); \ + do printf $$(printf '\%o' 0x$$c); \ + done; \ + done > $@ + +cbfs-files-y += spd.bin +spd.bin-file := $(SPD_BIN) +spd.bin-type := spd diff --git a/src/mainboard/intel/sklrvp/spd/empty.spd.hex b/src/mainboard/intel/sklrvp/spd/empty.spd.hex new file mode 100644 index 0000000..9ec39f1 --- /dev/null +++ b/src/mainboard/intel/sklrvp/spd/empty.spd.hex @@ -0,0 +1,16 @@ +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/intel/sklrvp/spd/rvp3.spd.hex b/src/mainboard/intel/sklrvp/spd/rvp3.spd.hex new file mode 100644 index 0000000..5291046 --- /dev/null +++ b/src/mainboard/intel/sklrvp/spd/rvp3.spd.hex @@ -0,0 +1,16 @@ +91 20 F1 03 04 11 05 0B 03 11 01 08 0A 00 50 01 +78 78 90 50 90 11 50 E0 10 04 3C 3C 01 90 00 00 +00 00 00 00 00 00 00 A8 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 55 00 00 00 00 00 +20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 +20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/intel/sklrvp/spd/spd.c b/src/mainboard/intel/sklrvp/spd/spd.c new file mode 100644 index 0000000..34a0999 --- /dev/null +++ b/src/mainboard/intel/sklrvp/spd/spd.c @@ -0,0 +1,118 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <arch/byteorder.h> +#include <cbfs.h> +#include <console/console.h> +#include <string.h> +#include <soc/gpio.h> +#include <soc/pei_data.h> +#include <soc/romstage.h> +#include <ec/google/chromeec/ec.h> +#include <mainboard/intel/sklrvp/spd/spd.h> + +static void mainboard_print_spd_info(uint8_t spd[]) +{ + const int spd_banks[8] = { 8, 16, 32, 64, -1, -1, -1, -1 }; + const int spd_capmb[8] = { 1, 2, 4, 8, 16, 32, 64, 0 }; + const int spd_rows[8] = { 12, 13, 14, 15, 16, -1, -1, -1 }; + const int spd_cols[8] = { 9, 10, 11, 12, -1, -1, -1, -1 }; + const int spd_ranks[8] = { 1, 2, 3, 4, -1, -1, -1, -1 }; + const int spd_devw[8] = { 4, 8, 16, 32, -1, -1, -1, -1 }; + const int spd_busw[8] = { 8, 16, 32, 64, -1, -1, -1, -1 }; + char spd_name[SPD_PART_LEN+1] = { 0 }; + + int banks = spd_banks[(spd[SPD_DENSITY_BANKS] >> 4) & 7]; + int capmb = spd_capmb[spd[SPD_DENSITY_BANKS] & 7] * 256; + int rows = spd_rows[(spd[SPD_ADDRESSING] >> 3) & 7]; + int cols = spd_cols[spd[SPD_ADDRESSING] & 7]; + int ranks = spd_ranks[(spd[SPD_ORGANIZATION] >> 3) & 7]; + int devw = spd_devw[spd[SPD_ORGANIZATION] & 7]; + int busw = spd_busw[spd[SPD_BUS_DEV_WIDTH] & 7]; + + /* Module type */ + printk(BIOS_INFO, "SPD: module type is "); + switch (spd[SPD_DRAM_TYPE]) { + case SPD_DRAM_DDR3: + printk(BIOS_INFO, "DDR3\n"); + break; + case SPD_DRAM_LPDDR3: + printk(BIOS_INFO, "LPDDR3\n"); + break; + default: + printk(BIOS_INFO, "Unknown (%02x)\n", spd[SPD_DRAM_TYPE]); + break; + } + + /* Module Part Number */ + memcpy(spd_name, &spd[SPD_PART_OFF], SPD_PART_LEN); + spd_name[SPD_PART_LEN] = 0; + printk(BIOS_INFO, "SPD: module part is %s\n", spd_name); + + printk(BIOS_INFO, + "SPD: banks %d, ranks %d, rows %d, columns %d, density %d Mb\n", + banks, ranks, rows, cols, capmb); + printk(BIOS_INFO, "SPD: device width %d bits, bus width %d bits\n", + devw, busw); + + if (capmb > 0 && busw > 0 && devw > 0 && ranks > 0) { + /* SIZE = DENSITY / 8 * BUS_WIDTH / SDRAM_WIDTH * RANKS */ + printk(BIOS_INFO, "SPD: module size is %u MB (per channel)\n", + capmb / 8 * busw / devw * ranks); + } +} + +/* Copy SPD data for on-board memory */ +void mainboard_fill_spd_data(struct pei_data *pei_data) +{ + char *spd_file; + size_t spd_file_len; + int spd_index; + + /* Find the SPD data in CBFS. */ + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (!spd_file) + die("SPD data not found."); + + /* make sure we have at least one SPD in the file. */ + if (spd_file_len < SPD_LEN) + die("Missing SPD data."); + + /* Add board SKU detection here. Currently we only support one. */ + spd_index = 0; + + /* Make sure we did not overrun the buffer */ + if (spd_file_len < ((spd_index + 1) * SPD_LEN)) { + printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n"); + spd_index = 0; + } + + /* Assume same memory in both channels */ + spd_index *= SPD_LEN; + memcpy(pei_data->spd_data[0][0], spd_file + spd_index, SPD_LEN); + memcpy(pei_data->spd_data[1][0], spd_file + spd_index, SPD_LEN); + + /* Make sure a valid SPD was found */ + if (pei_data->spd_data[0][0][0] == 0) + die("Invalid SPD data."); + + mainboard_print_spd_info(pei_data->spd_data[0][0]); +} diff --git a/src/mainboard/intel/sklrvp/spd/spd.h b/src/mainboard/intel/sklrvp/spd/spd.h new file mode 100644 index 0000000..18d4e68 --- /dev/null +++ b/src/mainboard/intel/sklrvp/spd/spd.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#ifndef _MAINBOARD_SPD_H_ +#define _MAINBOARD_SPD_H_ + +#define SPD_LEN 256 + +#define SPD_DRAM_TYPE 2 +#define SPD_DRAM_DDR3 0x0b +#define SPD_DRAM_LPDDR3 0xf1 +#define SPD_DENSITY_BANKS 4 +#define SPD_ADDRESSING 5 +#define SPD_ORGANIZATION 7 +#define SPD_BUS_DEV_WIDTH 8 +#define SPD_PART_OFF 128 +#define SPD_PART_LEN 18 + + +#endif /* _MAINBOARD_SPD_H_ */ diff --git a/src/mainboard/intel/sklrvp/thermal.h b/src/mainboard/intel/sklrvp/thermal.h new file mode 100644 index 0000000..5214e7e --- /dev/null +++ b/src/mainboard/intel/sklrvp/thermal.h @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#ifndef _MAINBOARD_THERMAL_H_ +#define _MAINBOARD_THERMAL_H_ + +#define TEMPERATURE_SENSOR_ID 0 /* PECI */ + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 104 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 95 + +/* Tj_max value for calculating PECI CPU temperature */ +#define MAX_TEMPERATURE 105 + +#endif /* _MAINBOARD_THERMAL_H_ */

1 0

Patch set updated for coreboot: soc/intel: Add Skylake SOC support
by Leroy P Leahy 14 Jul '15

14 Jul '15

Leroy P Leahy (leroy.p.leahy(a)intel.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10341 -gerrit commit 12a0709812bba2183c7c2b5c0008c2a7fa1e69c3 Author: Lee Leahy <leroy.p.leahy(a)intel.com> Date: Tue May 12 18:23:27 2015 -0700 soc/intel: Add Skylake SOC support Add the files to support the Skylake SOC. Matches chromium tree at 927026db BRANCH=none BUG=None TEST=Build and run on a Skylake platform Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15 Signed-off-by: Lee Leahy <leroy.p.leahy(a)intel.com> --- src/soc/intel/skylake/Kconfig | 300 +++--- src/soc/intel/skylake/Makefile.inc | 109 +- src/soc/intel/skylake/acpi.c | 337 +++--- src/soc/intel/skylake/acpi/adsp.asl | 73 -- src/soc/intel/skylake/acpi/cpu.asl | 3 +- src/soc/intel/skylake/acpi/ctdp.asl | 32 +- src/soc/intel/skylake/acpi/device_nvs.asl | 64 +- src/soc/intel/skylake/acpi/ehci.asl | 51 - src/soc/intel/skylake/acpi/globalnvs.asl | 42 +- src/soc/intel/skylake/acpi/gpio.asl | 12 +- src/soc/intel/skylake/acpi/hda.asl | 29 - src/soc/intel/skylake/acpi/irqlinks.asl | 83 +- src/soc/intel/skylake/acpi/itss.asl | 96 ++ src/soc/intel/skylake/acpi/lpc.asl | 54 +- src/soc/intel/skylake/acpi/pch.asl | 62 +- src/soc/intel/skylake/acpi/pci_irqs.asl | 172 ++-- src/soc/intel/skylake/acpi/pcie.asl | 107 +- src/soc/intel/skylake/acpi/pcie_port.asl | 28 - src/soc/intel/skylake/acpi/platform.asl | 6 +- src/soc/intel/skylake/acpi/sata.asl | 25 - src/soc/intel/skylake/acpi/serialio.asl | 609 ++++++----- src/soc/intel/skylake/acpi/sleepstates.asl | 3 +- src/soc/intel/skylake/acpi/smbus.asl | 5 +- src/soc/intel/skylake/acpi/systemagent.asl | 318 +++++- src/soc/intel/skylake/acpi/xhci.asl | 298 +++--- src/soc/intel/skylake/adsp.c | 167 --- src/soc/intel/skylake/bootblock/Makefile.inc | 2 +- src/soc/intel/skylake/bootblock/cpu.c | 96 +- src/soc/intel/skylake/bootblock/pch.c | 47 +- src/soc/intel/skylake/bootblock/systemagent.c | 5 +- src/soc/intel/skylake/bootblock/timestamp.inc | 6 +- src/soc/intel/skylake/chip.c | 70 +- src/soc/intel/skylake/chip.h | 172 +++- src/soc/intel/skylake/cpu.c | 272 ++--- src/soc/intel/skylake/cpu_info.c | 6 +- src/soc/intel/skylake/ehci.c | 103 -- src/soc/intel/skylake/elog.c | 36 +- src/soc/intel/skylake/finalize.c | 124 +-- src/soc/intel/skylake/flash_controller.c | 615 +++++++++++ src/soc/intel/skylake/gpio.c | 406 +++++--- src/soc/intel/skylake/hda.c | 181 ---- src/soc/intel/skylake/igd.c | 507 +-------- src/soc/intel/skylake/include/soc/acpi.h | 15 +- src/soc/intel/skylake/include/soc/adsp.h | 56 - .../intel/skylake/include/soc/chipset_fsp_util.h | 41 + src/soc/intel/skylake/include/soc/cpu.h | 23 +- src/soc/intel/skylake/include/soc/device_nvs.h | 33 +- src/soc/intel/skylake/include/soc/ehci.h | 32 - src/soc/intel/skylake/include/soc/gpio.h | 510 ++++++++- src/soc/intel/skylake/include/soc/iobp.h | 28 - src/soc/intel/skylake/include/soc/iomap.h | 14 +- src/soc/intel/skylake/include/soc/irq.h | 33 + src/soc/intel/skylake/include/soc/lpc.h | 56 +- src/soc/intel/skylake/include/soc/me.h | 507 --------- src/soc/intel/skylake/include/soc/msr.h | 19 +- src/soc/intel/skylake/include/soc/nvs.h | 14 +- src/soc/intel/skylake/include/soc/pch.h | 38 +- src/soc/intel/skylake/include/soc/pci_devs.h | 131 +-- src/soc/intel/skylake/include/soc/pcr.h | 104 ++ src/soc/intel/skylake/include/soc/pei_data.h | 25 +- src/soc/intel/skylake/include/soc/pei_wrapper.h | 11 +- src/soc/intel/skylake/include/soc/pm.h | 28 +- src/soc/intel/skylake/include/soc/pmc.h | 71 ++ src/soc/intel/skylake/include/soc/ramstage.h | 24 +- src/soc/intel/skylake/include/soc/rcba.h | 178 ---- src/soc/intel/skylake/include/soc/reset.h | 25 - src/soc/intel/skylake/include/soc/romstage.h | 35 +- src/soc/intel/skylake/include/soc/sata.h | 89 -- src/soc/intel/skylake/include/soc/serialio.h | 109 +- src/soc/intel/skylake/include/soc/smbus.h | 9 +- src/soc/intel/skylake/include/soc/smm.h | 46 +- src/soc/intel/skylake/include/soc/spi.h | 122 ++- src/soc/intel/skylake/include/soc/systemagent.h | 37 +- src/soc/intel/skylake/include/soc/xhci.h | 17 +- src/soc/intel/skylake/iobp.c | 152 --- src/soc/intel/skylake/lpc.c | 468 +-------- src/soc/intel/skylake/me.c | 1085 -------------------- src/soc/intel/skylake/me_status.c | 321 ------ src/soc/intel/skylake/memmap.c | 82 +- src/soc/intel/skylake/microcode/Makefile.inc | 14 +- src/soc/intel/skylake/microcode/microcode_blob.c | 7 +- src/soc/intel/skylake/minihd.c | 128 --- src/soc/intel/skylake/monotonic_timer.c | 9 +- src/soc/intel/skylake/pch.c | 160 +-- src/soc/intel/skylake/pcie.c | 616 +---------- src/soc/intel/skylake/pcr.c | 162 +++ src/soc/intel/skylake/pei_data.c | 11 +- src/soc/intel/skylake/pmc.c | 254 +++++ src/soc/intel/skylake/pmutil.c | 116 ++- src/soc/intel/skylake/ramstage.c | 85 +- src/soc/intel/skylake/refcode.c | 146 --- src/soc/intel/skylake/reset.c | 49 - src/soc/intel/skylake/romstage/Makefile.inc | 6 +- src/soc/intel/skylake/romstage/cache_as_ram.inc | 341 ------ src/soc/intel/skylake/romstage/cpu.c | 7 +- src/soc/intel/skylake/romstage/pch.c | 174 ++-- src/soc/intel/skylake/romstage/power_state.c | 29 +- src/soc/intel/skylake/romstage/raminit.c | 138 --- src/soc/intel/skylake/romstage/report_platform.c | 81 +- src/soc/intel/skylake/romstage/romstage.c | 620 +++++++++-- src/soc/intel/skylake/romstage/smbus.c | 3 +- src/soc/intel/skylake/romstage/spi.c | 61 +- src/soc/intel/skylake/romstage/stack.c | 124 --- src/soc/intel/skylake/romstage/systemagent.c | 3 +- src/soc/intel/skylake/romstage/uart.c | 78 +- src/soc/intel/skylake/sata.c | 264 ----- src/soc/intel/skylake/serialio.c | 318 ------ src/soc/intel/skylake/smbus.c | 10 +- src/soc/intel/skylake/smbus_common.c | 13 +- src/soc/intel/skylake/smi.c | 8 +- src/soc/intel/skylake/smihandler.c | 293 +++--- src/soc/intel/skylake/smmrelocate.c | 138 +-- src/soc/intel/skylake/spi.c | 680 ------------ src/soc/intel/skylake/stage_cache.c | 35 - src/soc/intel/skylake/systemagent.c | 93 +- src/soc/intel/skylake/tsc_freq.c | 3 +- src/soc/intel/skylake/uart.c | 76 ++ src/soc/intel/skylake/usbdebug.c | 51 - src/soc/intel/skylake/xhci.c | 54 +- 119 files changed, 5647 insertions(+), 10132 deletions(-) diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig index 0864e57..1cef21f 100644 --- a/src/soc/intel/skylake/Kconfig +++ b/src/soc/intel/skylake/Kconfig @@ -8,36 +8,42 @@ if SOC_INTEL_SKYLAKE config CPU_SPECIFIC_OPTIONS def_bool y select ARCH_BOOTBLOCK_X86_32 - select ARCH_VERSTAGE_X86_32 - select ARCH_ROMSTAGE_X86_32 select ARCH_RAMSTAGE_X86_32 - select ALT_CBFS_LOAD_PAYLOAD + select ARCH_ROMSTAGE_X86_32 + select ARCH_VERSTAGE_X86_32 select ALWAYS_LOAD_OPROM select BACKUP_DEFAULT_SMM_REGION - select CACHE_MRC_BIN select CACHE_MRC_SETTINGS - select MRC_SETTINGS_PROTECT select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM select CACHE_ROM select CAR_MIGRATION select COLLECT_TIMESTAMPS select CPU_INTEL_FIRMWARE_INTERFACE_TABLE - select SUPPORT_CPU_UCODE_IN_CBFS + select CPU_MICROCODE_IN_CBFS + select DYNAMIC_CBMEM + select HAS_PRECBMEM_TIMESTAMP_REGION + select HAVE_HARD_RESET select HAVE_MONOTONIC_TIMER select HAVE_SMI_HANDLER - select HAVE_HARD_RESET - select HAVE_USBDEBUG select IOAPIC select MMCONF_SUPPORT select MMCONF_SUPPORT_DEFAULT - select RELOCATABLE_MODULES - select RELOCATABLE_RAMSTAGE - select REG_SCRIPT select PARALLEL_MP select PCIEXP_ASPM select PCIEXP_COMMON_CLOCK select PCIEXP_CLK_PM - select PCIEXP_L1_SUB_STATE + # External devices not working on glados + #select PCIEXP_L1_SUB_STATE + select PLATFORM_USES_FSP1_1 + select REG_SCRIPT + select RELOCATABLE_MODULES + select RELOCATABLE_RAMSTAGE + select SOC_INTEL_COMMON + select SOC_INTEL_COMMON_FSP_RAM_INIT + select SOC_INTEL_COMMON_FSP_ROMSTAGE + select SOC_INTEL_COMMON_RESET + select SOC_INTEL_COMMON_STACK + select SOC_INTEL_COMMON_STAGE_CACHE select SMM_MODULES select SMM_TSEG select SMP @@ -47,8 +53,7 @@ config CPU_SPECIFIC_OPTIONS select TSC_CONSTANT_RATE select TSC_SYNC_MFENCE select UDELAY_TSC - select PER_DEVICE_ACPI_TABLES - select SOC_INTEL_COMMON + select USE_GENERIC_FSP_CAR_INC config BOOTBLOCK_CPU_INIT string @@ -58,94 +63,17 @@ config BOOTBLOCK_NORTHBRIDGE_INIT string default "soc/intel/skylake/bootblock/systemagent.c" -config BOOTBLOCK_SOUTHBRIDGE_INIT +config BOOTBLOCK_RESETS string - default "soc/intel/skylake/bootblock/pch.c" - - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config SERIAL_CPU_INIT - bool - default n - -config SMM_TSEG_SIZE - hex - default 0x800000 - -config IED_REGION_SIZE - hex - default 0x400000 + default "soc/intel/common/reset.c" -config SMM_RESERVED_SIZE - hex - default 0x100000 - -config VGA_BIOS_ID +config BOOTBLOCK_SOUTHBRIDGE_INIT string - default "8086,0406" - -config CACHE_MRC_SIZE_KB - int - default 512 - -config DCACHE_RAM_BASE - hex - default 0xff7c0000 - -config DCACHE_RAM_SIZE - hex - default 0x10000 - help - The size of the cache-as-ram region required during bootblock - and/or romstage. Note DCACHE_RAM_SIZE and DCACHE_RAM_MRC_VAR_SIZE - must add up to a power of 2. - -config DCACHE_RAM_MRC_VAR_SIZE - hex - default 0x30000 - help - The amount of cache-as-ram region required by the reference code. - -config DCACHE_RAM_ROMSTAGE_STACK_SIZE - hex - default 0x2000 - help - The amount of anticipated stack usage from the data cache - during pre-ram rom stage execution. - -config HAVE_MRC - bool "Add a Memory Reference Code binary" - help - Select this option to add a Memory Reference Code binary to - the resulting coreboot image. - - Note: Without this binary coreboot will not work - -if HAVE_MRC - -config MRC_FILE - string "Intel Memory Reference Code path and filename" - depends on HAVE_MRC - default "mrc.bin" - help - The filename of the file to use as Memory Reference Code binary. - -config MRC_BIN_ADDRESS - hex - default 0xfffa0000 - -config CACHE_MRC_SETTINGS - bool "Save cached MRC settings" - default y - -endif # HAVE_MRC + default "soc/intel/skylake/bootblock/pch.c" config CBFS_SIZE hex "Size of CBFS filesystem in ROM" - default 0x100000 + default 0x200000 help The firmware image has to store more than just coreboot, including: - a firmware descriptor @@ -154,76 +82,24 @@ config CBFS_SIZE This option allows to limit the size of the CBFS portion in the firmware image. -config PRE_GRAPHICS_DELAY - int "Graphics initialization delay in ms" - default 0 - help - On some systems, coreboot boots so fast that connected monitors - (mostly TVs) won't be able to wake up fast enough to talk to the - VBIOS. On those systems we need to wait for a bit before executing - the VBIOS. - -config RESET_ON_INVALID_RAMSTAGE_CACHE - bool "Reset the system on S3 wake when ramstage cache invalid." - default n - depends on RELOCATABLE_RAMSTAGE - help - The romstage code caches the loaded ramstage program in SMM space. - On S3 wake the romstage will copy over a fresh ramstage that was - cached in the SMM space. This option determines the action to take - when the ramstage cache is invalid. If selected the system will - reset otherwise the ramstage will be reloaded from cbfs. - -config INTEL_PCH_UART_CONSOLE - bool "Use Serial IO UART for console" - default n - select HAVE_UART_MEMORY_MAPPED - select CONSOLE_SERIAL8250MEM - depends on !CONFIG_DRIVERS_OXFORD_OXPCIE - -config INTEL_PCH_UART_CONSOLE_NUMBER - hex "Serial IO UART number to use for console" - default "0x0" - depends on INTEL_PCH_UART_CONSOLE - -config TTYS0_BASE - hex - default 0xd6000000 - depends on INTEL_PCH_UART_CONSOLE - -config EHCI_BAR - hex - default 0xd8000000 +config CPU_ADDR_BITS + int + default 36 -config EHCI_DEBUG_OFFSET - hex - default 0xa0 +config DCACHE_RAM_BASE + hex "Base address of cache-as-RAM" + default 0xfef00000 -config SERIRQ_CONTINUOUS_MODE - bool - default y - help - If you set this option to y, the serial IRQ machine will be - operated in continuous mode. -config HAVE_ME_BIN - bool "Add Intel Management Engine firmware" - default y +config DCACHE_RAM_SIZE + hex "Length in bytes of cache-as-RAM" + default 0x4000 help - The Intel processor in the selected system requires a special firmware - for an integrated controller called Management Engine (ME). The ME - firmware might be provided in coreboot's 3rdparty/blobs repository. If - not and if you don't have the firmware elsewhere, you can still - build coreboot without it. In this case however, you'll have to make - sure that you don't overwrite your ME firmware on your flash ROM. - -config ME_BIN_PATH - string "Path to management engine firmware" - depends on HAVE_ME_BIN - default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin" + The size of the cache-as-ram region required during bootblock + and/or romstage. config HAVE_IFD_BIN - bool "Use Intel Firmware Descriptor from existing binary" - default n + bool + default y config BUILD_WITH_FAKE_IFD bool "Build with a fake IFD" @@ -242,6 +118,30 @@ config BUILD_WITH_FAKE_IFD [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html +config HAVE_ME_BIN + bool "Add Intel Management Engine firmware" + default y + help + The Intel processor in the selected system requires a special firmware + for an integrated controller called Management Engine (ME). The ME + firmware might be provided in coreboot's 3rdparty/blobs repository. If + not and if you don't have the firmware elsewhere, you can still + build coreboot without it. In this case however, you'll have to make + sure that you don't overwrite your ME firmware on your flash ROM. + +config HEAP_SIZE + hex + default 0x80000 + +config IED_REGION_SIZE + hex + default 0x400000 + +config IFD_BIN_PATH + string "Path to intel firmware descriptor" + depends on !BUILD_WITH_FAKE_IFD + default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin" + config IFD_BIOS_SECTION depends on BUILD_WITH_FAKE_IFD string @@ -257,22 +157,72 @@ config IFD_PLATFORM_SECTION string default "" -config IFD_BIN_PATH - string "Path to intel firmware descriptor" - depends on !BUILD_WITH_FAKE_IFD - default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin" +config INTEL_PCH_UART_CONSOLE + bool "Use Serial IO UART for console" + default n + select HAVE_UART_MEMORY_MAPPED + select CONSOLE_SERIAL8250MEM + depends on !CONFIG_DRIVERS_OXFORD_OXPCIE + +config INTEL_PCH_UART_CONSOLE_NUMBER + hex "Serial IO UART number to use for console" + default "0x0" + depends on INTEL_PCH_UART_CONSOLE + +config ME_BIN_PATH + string "Path to management engine firmware" + depends on HAVE_ME_BIN + default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin" + +config MICROCODE_INCLUDE_PATH + string + default "src/soc/intel/skylake/microcode" -config LOCK_MANAGEMENT_ENGINE - bool "Lock Management Engine section" +config MMCONF_BASE_ADDRESS + hex "MMIO Base Address" + default 0xe0000000 + +config MONOTONIC_TIMER_MSR + def_bool y + select HAVE_MONOTONIC_TIMER + help + Provide a monotonic timer using the 24MHz MSR counter. + +config PRE_GRAPHICS_DELAY + int "Graphics initialization delay in ms" + default 0 + help + On some systems, coreboot boots so fast that connected monitors + (mostly TVs) won't be able to wake up fast enough to talk to the + VBIOS. On those systems we need to wait for a bit before executing + the VBIOS. + +config SERIAL_CPU_INIT + bool default n + +config SERIRQ_CONTINUOUS_MODE + bool + default y help - The Intel Management Engine supports preventing write accesses - from the host to the Management Engine section in the firmware - descriptor. If the ME section is locked, it can only be overwritten - with an external SPI flash programmer. You will want this if you - want to increase security of your ROM image once you are sure - that the ME firmware is no longer going to change. - - If unsure, say N. + If you set this option to y, the serial IRQ machine will be + operated in continuous mode. + +config SMM_RESERVED_SIZE + hex + default 0x200000 + +config SMM_TSEG_SIZE + hex + default 0x800000 + +config TTYS0_BASE + hex + default 0xfe034000 + depends on INTEL_PCH_UART_CONSOLE + +config VGA_BIOS_ID + string + default "8086,0406" endif diff --git a/src/soc/intel/skylake/Makefile.inc b/src/soc/intel/skylake/Makefile.inc index dafceb7..b6714a9 100644 --- a/src/soc/intel/skylake/Makefile.inc +++ b/src/soc/intel/skylake/Makefile.inc @@ -3,81 +3,79 @@ ifeq ($(CONFIG_SOC_INTEL_SKYLAKE),y) subdirs-y += bootblock subdirs-y += microcode subdirs-y += romstage +subdirs-y += ../common +subdirs-y += ../../../cpu/intel/microcode +subdirs-y += ../../../cpu/intel/turbo subdirs-y += ../../../cpu/x86/lapic subdirs-y += ../../../cpu/x86/mtrr subdirs-y += ../../../cpu/x86/smm subdirs-y += ../../../cpu/x86/tsc -subdirs-y += ../../../cpu/intel/microcode -subdirs-y += ../../../cpu/intel/turbo -ramstage-y += acpi.c -ramstage-y += adsp.c +romstage-y += gpio.c +romstage-y += memmap.c +romstage-y += pch.c +romstage-y += pcr.c +romstage-y += pei_data.c +romstage-y += pmutil.c +romstage-y += smbus_common.c +romstage-y += tsc_freq.c + +ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c ramstage-y += chip.c ramstage-y += cpu.c ramstage-y += cpu_info.c -smm-y += cpu_info.c -ramstage-$(CONFIG_ELOG) += elog.c +ramstage-y += elog.c ramstage-y += finalize.c +ramstage-y += flash_controller.c ramstage-y += gpio.c -romstage-y += gpio.c -smm-y += gpio.c -ramstage-y += hda.c ramstage-y += igd.c -ramstage-y += iobp.c -romstage-y += iobp.c ramstage-y += lpc.c -ramstage-y += me.c -ramstage-y += me_status.c -romstage-y += me_status.c ramstage-y += memmap.c -romstage-y += memmap.c -ramstage-y += minihd.c ramstage-y += monotonic_timer.c -smm-y += monotonic_timer.c ramstage-y += pch.c -romstage-y += pch.c ramstage-y += pcie.c +ramstage-y += pcr.c ramstage-y += pei_data.c -romstage-y += pei_data.c +ramstage-y += pmc.c ramstage-y += pmutil.c -romstage-y += pmutil.c -smm-y += pmutil.c ramstage-y += ramstage.c -ramstage-$(CONFIG_HAVE_REFCODE_BLOB) += refcode.c -ramstage-y += reset.c -romstage-y += reset.c -ramstage-y += sata.c -ramstage-y += serialio.c ramstage-y += smbus.c ramstage-y += smbus_common.c -romstage-y += smbus_common.c ramstage-y += smi.c -smm-y += smihandler.c ramstage-y += smmrelocate.c -ramstage-y += spi.c -smm-$(CONFIG_SPI_FLASH_SMM) += spi.c -ramstage-y += stage_cache.c -romstage-y += stage_cache.c ramstage-y += systemagent.c ramstage-y += tsc_freq.c -romstage-y += tsc_freq.c -smm-y += tsc_freq.c -ramstage-y += ehci.c +ramstage-y += uart.c ramstage-y += xhci.c -smm-y += xhci.c -ifeq ($(CONFIG_USBDEBUG),y) -ramstage-y += usbdebug.c -romstage-y += usbdebug.c -smm-y += usbdebug.c -endif +smm-y += cpu_info.c +smm-y += gpio.c +smm-y += monotonic_timer.c +smm-y += pcr.c +smm-y += pch.c +smm-y += pmutil.c +smm-y += smihandler.c +smm-$(CONFIG_SPI_FLASH_SMM) += flash_controller.c +smm-y += tsc_freq.c +smm-y += xhci.c + +CPPFLAGS_common += -I$(src)/arch/x86/include/ +CPPFLAGS_common += -I$(src)/soc/intel/skylake +CPPFLAGS_common += -I$(src)/soc/intel/skylake/include -CPPFLAGS_common += -Isrc/soc/intel/broadwell/include +CPPFLAGS_common += -I3rdparty/blobs/mainboard/$(CONFIG_MAINBOARD_DIR) + +CPPFLAGS_common += -I$(src)/drivers/intel/fsp1_1 +CPPFLAGS_common += -I$(src)/vendorcode/intel/fsp/fsp1_1 +CPPFLAGS_common += -I$(src)/vendorcode/intel/edk2/uefi_2.4 +CPPFLAGS_common += -I$(src)/vendorcode/intel/edk2/uefi_2.4/MdePkg/Include +CPPFLAGS_common += -I$(src)/vendorcode/intel/edk2/uefi_2.4/MdePkg/Include/Ia32 +CPPFLAGS_common += -I$(CONFIG_FSP_INCLUDE_PATH) # Run an intermediate step when producing coreboot.rom # that adds additional components to the final firmware # image outside of CBFS -INTERMEDIATE := broadwell_add_me +INTERMEDIATE := pch_add_me ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y) IFD_BIN_PATH := $(objgenerated)/ifdfake.bin @@ -88,7 +86,7 @@ else IFD_BIN_PATH := $(CONFIG_IFD_BIN_PATH) endif -broadwell_add_me: $(obj)/coreboot.pre $(IFDTOOL) $(IFDFAKE) +pch_add_me: $(obj)/coreboot.pre $(IFDTOOL) $(IFDFAKE) ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y) printf "\n** WARNING **\n" printf "Coreboot will be built with a fake Intel Firmware Descriptor (IFD).\n" @@ -106,29 +104,8 @@ ifeq ($(CONFIG_HAVE_ME_BIN),y) -i ME:$(CONFIG_ME_BIN_PATH) \ $(obj)/coreboot.pre mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre -ifeq ($(CONFIG_LOCK_MANAGEMENT_ENGINE),y) - printf " IFDTOOL Locking Management Engine\n" - $(objutil)/ifdtool/ifdtool -l $(obj)/coreboot.pre - mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre -else - printf " IFDTOOL Unlocking Management Engine\n" - $(objutil)/ifdtool/ifdtool -u $(obj)/coreboot.pre - mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre endif -endif - -PHONY += broadwell_add_me - -# If an MRC file is an ELF file determine the entry address and first loadable -# section offset in the file. Subtract the offset from the entry address to -# determine the final location. -mrcelfoffset = $(shell $(READELF_x86_32) -S -W $(CONFIG_MRC_FILE) | sed -e 's/\[ /[0/' | awk '$$3 ~ /PROGBITS/ { print "0x"$$5; exit }' ) -mrcelfentry = $(shell $(READELF_x86_32) -h -W $(CONFIG_MRC_FILE) | grep 'Entry point address' | awk '{print $$NF }') -# Add memory reference code blob. -cbfs-files-$(CONFIG_HAVE_MRC) += mrc.bin -mrc.bin-file := $(call strip_quotes,$(CONFIG_MRC_FILE)) -mrc.bin-position := $(if $(findstring elf,$(CONFIG_MRC_FILE)),$(shell printf "0x%x" $$(( $(mrcelfentry) - $(mrcelfoffset) )) ),$(CONFIG_MRC_BIN_ADDRESS)) -mrc.bin-type := mrc +PHONY += pch_add_me endif diff --git a/src/soc/intel/skylake/acpi.c b/src/soc/intel/skylake/acpi.c index f038e87..1b193c7 100644 --- a/src/soc/intel/skylake/acpi.c +++ b/src/soc/intel/skylake/acpi.c @@ -3,6 +3,7 @@ * * Copyright (C) 2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/acpi.h> @@ -23,9 +24,10 @@ #include <arch/io.h> #include <arch/smp/mpspec.h> #include <cbmem.h> +#include <chip.h> #include <console/console.h> +#include <cpu/cpu.h> #include <cpu/x86/smm.h> -#include <console/console.h> #include <types.h> #include <string.h> #include <arch/cpu.h> @@ -41,36 +43,33 @@ #include <soc/msr.h> #include <soc/pci_devs.h> #include <soc/pm.h> -#include <soc/intel/broadwell/chip.h> /* - * List of supported C-states in this processor. Only the ULT parts support C8, - * C9, and C10. + * List of suported C-states in this processor. */ enum { - C_STATE_C0, /* 0 */ - C_STATE_C1, /* 1 */ - C_STATE_C1E, /* 2 */ - C_STATE_C3, /* 3 */ - C_STATE_C6_SHORT_LAT, /* 4 */ - C_STATE_C6_LONG_LAT, /* 5 */ - C_STATE_C7_SHORT_LAT, /* 6 */ - C_STATE_C7_LONG_LAT, /* 7 */ - C_STATE_C7S_SHORT_LAT, /* 8 */ - C_STATE_C7S_LONG_LAT, /* 9 */ - C_STATE_C8, /* 10 */ - C_STATE_C9, /* 11 */ - C_STATE_C10, /* 12 */ + C_STATE_C0, /* 0 */ + C_STATE_C1, /* 1 */ + C_STATE_C1E, /* 2 */ + C_STATE_C3, /* 3 */ + C_STATE_C6_SHORT_LAT, /* 4 */ + C_STATE_C6_LONG_LAT, /* 5 */ + C_STATE_C7_SHORT_LAT, /* 6 */ + C_STATE_C7_LONG_LAT, /* 7 */ + C_STATE_C7S_SHORT_LAT, /* 8 */ + C_STATE_C7S_LONG_LAT, /* 9 */ + C_STATE_C8, /* 10 */ + C_STATE_C9, /* 11 */ + C_STATE_C10, /* 12 */ NUM_C_STATES }; - -#define MWAIT_RES(state, sub_state) \ - { \ - .addrl = (((state) << 4) | (sub_state)), \ - .space_id = ACPI_ADDRESS_SPACE_FIXED, \ - .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, \ - .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, \ - .access_size = ACPI_FFIXEDHW_FLAG_HW_COORD, \ +#define MWAIT_RES(state, sub_state) \ + { \ + .addrl = (((state) << 4) | (sub_state)), \ + .space_id = ACPI_ADDRESS_SPACE_FIXED, \ + .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, \ + .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, \ + .access_size = ACPI_FFIXEDHW_FLAG_HW_COORD, \ } static acpi_cstate_t cstate_map[NUM_C_STATES] = { @@ -78,75 +77,78 @@ static acpi_cstate_t cstate_map[NUM_C_STATES] = { [C_STATE_C1] = { .latency = 0, .power = 1000, - .resource = MWAIT_RES(0,0), + .resource = MWAIT_RES(0, 0), }, [C_STATE_C1E] = { .latency = 0, .power = 1000, - .resource = MWAIT_RES(0,1), + .resource = MWAIT_RES(0, 1), }, [C_STATE_C3] = { .latency = C_STATE_LATENCY_FROM_LAT_REG(0), - .power = 900, + .power = 500, .resource = MWAIT_RES(1, 0), }, [C_STATE_C6_SHORT_LAT] = { .latency = C_STATE_LATENCY_FROM_LAT_REG(1), - .power = 800, + .power = 350, .resource = MWAIT_RES(2, 0), }, [C_STATE_C6_LONG_LAT] = { .latency = C_STATE_LATENCY_FROM_LAT_REG(2), - .power = 800, + .power = 350, .resource = MWAIT_RES(2, 1), }, [C_STATE_C7_SHORT_LAT] = { .latency = C_STATE_LATENCY_FROM_LAT_REG(1), - .power = 700, + .power = 200, .resource = MWAIT_RES(3, 0), }, [C_STATE_C7_LONG_LAT] = { .latency = C_STATE_LATENCY_FROM_LAT_REG(2), - .power = 700, + .power = 200, .resource = MWAIT_RES(3, 1), }, [C_STATE_C7S_SHORT_LAT] = { .latency = C_STATE_LATENCY_FROM_LAT_REG(1), - .power = 700, + .power = 200, .resource = MWAIT_RES(3, 2), }, [C_STATE_C7S_LONG_LAT] = { .latency = C_STATE_LATENCY_FROM_LAT_REG(2), - .power = 700, + .power = 200, .resource = MWAIT_RES(3, 3), }, [C_STATE_C8] = { .latency = C_STATE_LATENCY_FROM_LAT_REG(3), - .power = 600, + .power = 200, .resource = MWAIT_RES(4, 0), }, [C_STATE_C9] = { .latency = C_STATE_LATENCY_FROM_LAT_REG(4), - .power = 500, + .power = 200, .resource = MWAIT_RES(5, 0), }, [C_STATE_C10] = { .latency = C_STATE_LATENCY_FROM_LAT_REG(5), - .power = 400, + .power = 200, .resource = MWAIT_RES(6, 0), }, }; -static int cstate_set_s0ix[3] = { +static int cstate_set_s0ix[] = { C_STATE_C1E, C_STATE_C7S_LONG_LAT, C_STATE_C10 }; -static int cstate_set_non_s0ix[3] = { +static int cstate_set_non_s0ix[] = { C_STATE_C1E, C_STATE_C3, - C_STATE_C7S_LONG_LAT + C_STATE_C7S_LONG_LAT, + C_STATE_C8, + C_STATE_C9, + C_STATE_C10 }; static int get_cores_per_package(void) @@ -173,15 +175,15 @@ void acpi_init_gnvs(global_nvs_t *gnvs) /* CPU core count */ gnvs->pcnt = dev_count_cpu(); -#if CONFIG_CONSOLE_CBMEM +#if IS_ENABLED(CONFIG_CONSOLE_CBMEM) /* Update the mem console pointer. */ gnvs->cbmc = (u32)cbmem_find(CBMEM_ID_CONSOLE); #endif -#if CONFIG_CHROMEOS +#if IS_ENABLED(CONFIG_CHROMEOS) /* Initialize Verified Boot data */ chromeos_init_vboot(&(gnvs->chromeos)); -#if CONFIG_EC_GOOGLE_CHROMEEC +#if IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC) gnvs->chromeos.vbt2 = google_ec_running_ro() ? ACTIVE_ECFW_RO : ACTIVE_ECFW_RW; #endif @@ -189,37 +191,6 @@ void acpi_init_gnvs(global_nvs_t *gnvs) #endif } -void acpi_create_intel_hpet(acpi_hpet_t * hpet) -{ - acpi_header_t *header = &(hpet->header); - acpi_addr_t *addr = &(hpet->addr); - - memset((void *) hpet, 0, sizeof(acpi_hpet_t)); - - /* fill out header fields */ - memcpy(header->signature, "HPET", 4); - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - - header->length = sizeof(acpi_hpet_t); - header->revision = 1; - - /* fill out HPET address */ - addr->space_id = 0; /* Memory */ - addr->bit_width = 64; - addr->bit_offset = 0; - addr->addrl = (unsigned long long)HPET_BASE_ADDRESS & 0xffffffff; - addr->addrh = (unsigned long long)HPET_BASE_ADDRESS >> 32; - - hpet->id = 0x8086a201; /* Intel */ - hpet->number = 0x00; - hpet->min_tick = 0x0080; - - header->checksum = - acpi_checksum((void *) hpet, sizeof(acpi_hpet_t)); -} - unsigned long acpi_fill_mcfg(unsigned long current) { current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *)current, @@ -336,82 +307,25 @@ void acpi_fill_in_fadt(acpi_fadt_t *fadt) fadt->x_gpe1_blk.addrh = 0x0; } -static acpi_tstate_t tss_table_fine[] = { - { 100, 1000, 0, 0x00, 0 }, - { 94, 940, 0, 0x1f, 0 }, - { 88, 880, 0, 0x1e, 0 }, - { 82, 820, 0, 0x1d, 0 }, - { 75, 760, 0, 0x1c, 0 }, - { 69, 700, 0, 0x1b, 0 }, - { 63, 640, 0, 0x1a, 0 }, - { 57, 580, 0, 0x19, 0 }, - { 50, 520, 0, 0x18, 0 }, - { 44, 460, 0, 0x17, 0 }, - { 38, 400, 0, 0x16, 0 }, - { 32, 340, 0, 0x15, 0 }, - { 25, 280, 0, 0x14, 0 }, - { 19, 220, 0, 0x13, 0 }, - { 13, 160, 0, 0x12, 0 }, -}; - -static acpi_tstate_t tss_table_coarse[] = { - { 100, 1000, 0, 0x00, 0 }, - { 88, 875, 0, 0x1f, 0 }, - { 75, 750, 0, 0x1e, 0 }, - { 63, 625, 0, 0x1d, 0 }, - { 50, 500, 0, 0x1c, 0 }, - { 38, 375, 0, 0x1b, 0 }, - { 25, 250, 0, 0x1a, 0 }, - { 13, 125, 0, 0x19, 0 }, -}; - -static int generate_T_state_entries(int core, int cores_per_package) +static void generate_c_state_entries(int s0ix_enable, int max_cstate) { - int len; - - /* Indicate SW_ALL coordination for T-states */ - len = acpigen_write_TSD_package(core, cores_per_package, SW_ALL); - - /* Indicate FFixedHW so OS will use MSR */ - len += acpigen_write_empty_PTC(); - - /* Set a T-state limit that can be modified in NVS */ - len += acpigen_write_TPC("\\TLVL"); - - /* - * CPUID.(EAX=6):EAX[5] indicates support - * for extended throttle levels. - */ - if (cpuid_eax(6) & (1 << 5)) - len += acpigen_write_TSS_package( - ARRAY_SIZE(tss_table_fine), tss_table_fine); - else - len += acpigen_write_TSS_package( - ARRAY_SIZE(tss_table_coarse), tss_table_coarse); - - return len; -} -static int generate_C_state_entries(void) -{ - device_t dev = SA_DEV_ROOT; - config_t *config = dev->chip_info; - acpi_cstate_t map[3]; + acpi_cstate_t map[max_cstate]; int *set; int i; - if (config->s0ix_enable) + if (s0ix_enable) set = cstate_set_s0ix; else set = cstate_set_non_s0ix; - for (i = 0; i < 3; i++) { + for (i = 0; i < max_cstate; i++) { memcpy(&map[i], &cstate_map[set[i]], sizeof(acpi_cstate_t)); map[i].ctype = i + 1; } /* Generate C-state tables */ - return acpigen_write_CST_package(map, ARRAY_SIZE(map)); + acpigen_write_CST_package(map, ARRAY_SIZE(map)); } static int calculate_power(int tdp, int p1_ratio, int ratio) @@ -435,7 +349,7 @@ static int calculate_power(int tdp, int p1_ratio, int ratio) return (int)power; } -static void generate_P_state_entries(int core, int cores_per_package) +static void generate_p_state_entries(int core, int cores_per_package) { int ratio_min, ratio_max, ratio_turbo, ratio_step; int coord_type, power_max, power_unit, num_entries; @@ -484,10 +398,10 @@ static void generate_P_state_entries(int core, int cores_per_package) /* Determine ratio points */ ratio_step = PSS_RATIO_STEP; - num_entries = (ratio_max - ratio_min) / ratio_step; - while (num_entries > PSS_MAX_ENTRIES-1) { - ratio_step <<= 1; - num_entries >>= 1; + num_entries = ((ratio_max - ratio_min) / ratio_step) + 1; + if (num_entries > PSS_MAX_ENTRIES) { + ratio_step += 1; + num_entries = ((ratio_max - ratio_min) / ratio_step) + 1; } /* P[T] is Turbo state if enabled */ @@ -500,12 +414,12 @@ static void generate_P_state_entries(int core, int cores_per_package) /* Add entry for Turbo ratio */ acpigen_write_PSS_package( - clock_max + 1, /*MHz*/ - power_max, /*mW*/ - PSS_LATENCY_TRANSITION, /*lat1*/ - PSS_LATENCY_BUSMASTER, /*lat2*/ - ratio_turbo << 8, /*control*/ - ratio_turbo << 8); /*status*/ + clock_max + 1, /* MHz */ + power_max, /* mW */ + PSS_LATENCY_TRANSITION, /* lat1 */ + PSS_LATENCY_BUSMASTER, /* lat2 */ + ratio_turbo << 8, /* control */ + ratio_turbo << 8); /* status */ } else { /* _PSS package count without Turbo */ acpigen_write_package(num_entries + 1); @@ -513,12 +427,12 @@ static void generate_P_state_entries(int core, int cores_per_package) /* First regular entry is max non-turbo ratio */ acpigen_write_PSS_package( - clock_max, /*MHz*/ - power_max, /*mW*/ - PSS_LATENCY_TRANSITION, /*lat1*/ - PSS_LATENCY_BUSMASTER, /*lat2*/ - ratio_max << 8, /*control*/ - ratio_max << 8); /*status*/ + clock_max, /* MHz */ + power_max, /* mW */ + PSS_LATENCY_TRANSITION, /* lat1 */ + PSS_LATENCY_BUSMASTER, /* lat2 */ + ratio_max << 8, /* control */ + ratio_max << 8); /* status */ /* Generate the remaining entries */ for (ratio = ratio_min + ((num_entries - 1) * ratio_step); @@ -529,50 +443,55 @@ static void generate_P_state_entries(int core, int cores_per_package) clock = ratio * CPU_BCLK; acpigen_write_PSS_package( - clock, /*MHz*/ - power, /*mW*/ - PSS_LATENCY_TRANSITION, /*lat1*/ - PSS_LATENCY_BUSMASTER, /*lat2*/ - ratio << 8, /*control*/ - ratio << 8); /*status*/ + clock, /* MHz */ + power, /* mW */ + PSS_LATENCY_TRANSITION, /* lat1 */ + PSS_LATENCY_BUSMASTER, /* lat2 */ + ratio << 8, /* control */ + ratio << 8); /* status */ } /* Fix package length */ acpigen_pop_len(); } -void generate_cpu_entries(void) +void generate_cpu_entries(device_t device) { - int coreID, cpuID, pcontrol_blk = ACPI_BASE_ADDRESS, plen = 6; + int core_id, cpu_id, pcontrol_blk = ACPI_BASE_ADDRESS, plen = 6; int totalcores = dev_count_cpu(); int cores_per_package = get_cores_per_package(); int numcpus = totalcores/cores_per_package; + device_t dev = SA_DEV_ROOT; + config_t *config = dev->chip_info; + int is_s0ix_enable = config->s0ix_enable; + int max_c_state; + + if (is_s0ix_enable) + max_c_state = ARRAY_SIZE(cstate_set_s0ix); + else + max_c_state = ARRAY_SIZE(cstate_set_non_s0ix); printk(BIOS_DEBUG, "Found %d CPU(s) with %d core(s) each.\n", numcpus, cores_per_package); - for (cpuID=1; cpuID <=numcpus; cpuID++) { - for (coreID=1; coreID<=cores_per_package; coreID++) { - if (coreID>1) { + for (cpu_id = 0; cpu_id < numcpus; cpu_id++) { + for (core_id = 0; core_id < cores_per_package; core_id++) { + if (core_id > 0) { pcontrol_blk = 0; plen = 0; } /* Generate processor \_PR.CPUx */ acpigen_write_processor( - (cpuID-1)*cores_per_package+coreID-1, + cpu_id*cores_per_package+core_id, pcontrol_blk, plen); - - /* Generate P-state tables */ - generate_P_state_entries( - coreID-1, cores_per_package); - /* Generate C-state tables */ - generate_C_state_entries(); + generate_c_state_entries(is_s0ix_enable, + max_c_state); - /* Generate T-state tables */ - generate_T_state_entries( - cpuID-1, cores_per_package); + /* Generate P-state tables */ + generate_p_state_entries(core_id, + cores_per_package); acpigen_pop_len(); } @@ -600,3 +519,71 @@ unsigned long acpi_madt_irq_overrides(unsigned long current) return current; } + +#define ALIGN_CURRENT current = (ALIGN(current, 16)) + +unsigned long southcluster_write_acpi_tables(device_t device, + unsigned long current, + struct acpi_rsdp *rsdp) +{ + acpi_header_t *ssdt2; + + current = acpi_write_hpet(device, current, rsdp); + ALIGN_CURRENT; + +#if CONFIG_GOP_SUPPORT + igd_opregion_t *opregion; + + printk(BIOS_DEBUG, "ACPI: * IGD OpRegion\n"); + opregion = (igd_opregion_t *)current; + init_igd_opregion(opregion); + current += sizeof(igd_opregion_t); + ALIGN_CURRENT; +#endif + + ssdt2 = (acpi_header_t *)current; + memset(ssdt2, 0, sizeof(acpi_header_t)); + acpi_create_serialio_ssdt(ssdt2); + if (ssdt2->length) { + current += ssdt2->length; + acpi_add_table(rsdp, ssdt2); + printk(BIOS_DEBUG, "ACPI: * SSDT2 @ %p Length %x\n",ssdt2, + ssdt2->length); + ALIGN_CURRENT; + } else { + ssdt2 = NULL; + printk(BIOS_DEBUG, "ACPI: * SSDT2 not generated.\n"); + } + + printk(BIOS_DEBUG, "current = %lx\n", current); + + return current; +} + +void southcluster_inject_dsdt(device_t device) +{ + global_nvs_t *gnvs; + + gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); + if (!gnvs) { + gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof (*gnvs)); + if (gnvs) + memset(gnvs, 0, sizeof(*gnvs)); + } + + if (gnvs) { + acpi_create_gnvs(gnvs); + acpi_save_gnvs((unsigned long)gnvs); + /* And tell SMI about it */ + smm_setup_structures(gnvs, NULL, NULL); + + /* Add it to DSDT. */ + acpigen_write_scope("\\"); + acpigen_write_name_dword("NVSA", (u32) gnvs); + acpigen_pop_len(); + } +} + +__attribute__((weak)) void acpi_create_serialio_ssdt(acpi_header_t *ssdt) +{ +} diff --git a/src/soc/intel/skylake/acpi/adsp.asl b/src/soc/intel/skylake/acpi/adsp.asl deleted file mode 100644 index cb10d9a..0000000 --- a/src/soc/intel/skylake/acpi/adsp.asl +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Device (ADSP) -{ - Method (_HID, 0, Serialized) - { - If (\ISWP ()) { - // WildcatPoint - Return ("INT3438") - } - - // LynxPoint-LP - Return ("INT33C8") - } - Name (_UID, 1) - Name (_DDN, "Intel Smart Sound Technology") - - Name (RBUF, ResourceTemplate () - { - Memory32Fixed (ReadWrite, 0x00000000, 0x00100000, BAR0) - Memory32Fixed (ReadWrite, 0x00000000, 0x00001000, BAR1) - Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , ) {3} - }) - - Method (_CRS, 0, NotSerialized) - { - // Update BAR address and length if set in NVS - If (LNotEqual (\S8B0, Zero)) { - CreateDwordField (^RBUF, ^BAR0._BAS, B8A0) - CreateDwordField (^RBUF, ^BAR1._BAS, B8A1) - Store (\S8B0, B8A0) - Store (\S8B1, B8A1) - } - - Return (RBUF) - } - - Method (_STA, 0, NotSerialized) - { - If (LEqual (\S8EN, 0)) { - Return (0x0) - } Else { - Return (0xF) - } - } - - Device (I2S0) - { - Name (_ADR, 0) - } - - Device (I2S1) - { - Name (_ADR, 1) - } -} diff --git a/src/soc/intel/skylake/acpi/cpu.asl b/src/soc/intel/skylake/acpi/cpu.asl index 2921cea..b830ad6 100644 --- a/src/soc/intel/skylake/acpi/cpu.asl +++ b/src/soc/intel/skylake/acpi/cpu.asl @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ /* These devices are created at runtime */ diff --git a/src/soc/intel/skylake/acpi/ctdp.asl b/src/soc/intel/skylake/acpi/ctdp.asl index a2a8fb4..1668b4c 100644 --- a/src/soc/intel/skylake/acpi/ctdp.asl +++ b/src/soc/intel/skylake/acpi/ctdp.asl @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ Scope (\_SB.PCI0.MCHC) @@ -30,40 +31,43 @@ Scope (\_SB.PCI0.MCHC) Add (MCH_BASE_ADDRESS, 0x5000), 0x1000) Field (MCHB, DWordAcc, Lock, Preserve) { - Offset (0x930), /* PACKAGE_POWER_SKU */ + Offset (0x930), /* PACKAGE_POWER_SKU */ CTDN, 15, /* CTDP Nominal PL1 */ - Offset (0x938), /* PACKAGE_POWER_SKU_UNIT */ + Offset (0x938), /* PACKAGE_POWER_SKU_UNIT */ PUNI, 4, /* Power Units */ , 4, EUNI, 5, /* Energy Units */ , 3, TUNI, 4, /* Time Units */ - Offset (0x958), /* PLATFORM_INFO */ - , 40, + Offset (0x958), /* PLATFORM_INFO */ + , 32, + LPMS, 1, /* LPM Support */ + CTNL, 2, /* Config TDP Number level */ + , 5, LFM_, 8, /* Maximum Efficiency Ratio (LFM) */ - Offset (0x9a0), /* TURBO_POWER_LIMIT1 */ + Offset (0x9a0), /* TURBO_POWER_LIMIT1 */ PL1V, 15, /* Power Limit 1 Value */ PL1E, 1, /* Power Limit 1 Enable */ PL1C, 1, /* Power Limit 1 Clamp */ PL1T, 7, /* Power Limit 1 Time */ - Offset (0x9a4), /* TURBO_POWER_LIMIT2 */ + Offset (0x9a4), /* TURBO_POWER_LIMIT2 */ PL2V, 15, /* Power Limit 2 Value */ PL2E, 1, /* Power Limit 2 Enable */ PL2C, 1, /* Power Limit 2 Clamp */ PL2T, 7, /* Power Limit 2 Time */ - Offset (0xf3c), /* CONFIG_TDP_NOMINAL */ + Offset (0xf3c), /* CONFIG_TDP_NOMINAL */ TARN, 8, /* CTDP Nominal Turbo Activation Ratio */ - Offset (0xf40), /* CONFIG_TDP_LEVEL1 */ + Offset (0xf40), /* CONFIG_TDP_LEVEL1 */ CTDD, 15, /* CTDP Down PL1 */ , 1, TARD, 8, /* CTDP Down Turbo Activation Ratio */ - Offset (0xf48), /* MSR_CONFIG_TDP_LEVEL2 */ + Offset (0xf48), /* MSR_CONFIG_TDP_LEVEL2 */ CTDU, 15, /* CTDP Up PL1 */ , 1, TARU, 8, /* CTDP Up Turbo Activation Ratio */ - Offset (0xf50), /* CONFIG_TDP_CONTROL */ + Offset (0xf50), /* CONFIG_TDP_CONTROL */ CTCS, 2, /* CTDP Select */ - Offset (0xf54), /* TURBO_ACTIVATION_RATIO */ + Offset (0xf54), /* TURBO_ACTIVATION_RATIO */ TARS, 8, /* Turbo Activation Ratio Select */ } @@ -85,7 +89,7 @@ Scope (\_SB.PCI0.MCHC) While (LLess (Local0, Local1)) { /* Store _PSS entry Control value to Local2 */ ShiftRight (DeRefOf (Index (DeRefOf (Index - (\_PR.CP00._PSS, Local0)), 4)), 8, Local2) + (\_PR.CP00._PSS, Local0)), 4)), 8, Local2) If (LEqual (Local2, Arg0)) { Return (Subtract (Local0, 1)) } @@ -98,8 +102,6 @@ Scope (\_SB.PCI0.MCHC) /* Calculate PL2 based on chip type */ Method (CPL2, 1, NotSerialized) { - /* Haswell ULT PL2 = 25W */ - /* FIXME: update for broadwell */ Return (Multiply (25, 8)) } diff --git a/src/soc/intel/skylake/acpi/device_nvs.asl b/src/soc/intel/skylake/acpi/device_nvs.asl index 1d2aa78..e84d25a 100644 --- a/src/soc/intel/skylake/acpi/device_nvs.asl +++ b/src/soc/intel/skylake/acpi/device_nvs.asl @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,41 +15,46 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ /* Device Enabled in ACPI Mode */ -S0EN, 8, // DMA Enable -S1EN, 8, // I2C0 Enable -S2EN, 8, // I2C1 Enable -S3EN, 8, // SPI0 Enable -S4EN, 8, // SPI1 Enable -S5EN, 8, // UART0 Enable -S6EN, 8, // UART1 Enable -S7EN, 8, // SDIO Enable -S8EN, 8, // ADSP Enable +S0EN, 8, // I2C0 Enable +S1EN, 8, // I2C1 Enable +S2EN, 8, // I2C2 Enable +S3EN, 8, // I2C3 Enable +S4EN, 8, // I2C4 Enable +S5EN, 8, // I2C5 Enable +S6EN, 8, // SPI0 Enable +S7EN, 8, // SPI1 Enable +S8EN, 8, // UART0 Enable +S9EN, 8, // UART1 Enable +SAEN, 8, // UART2 Enable /* BAR 0 */ - -S0B0, 32, // DMA BAR0 -S1B0, 32, // I2C0 BAR0 -S2B0, 32, // I2C1 BAR0 -S3B0, 32, // SPI0 BAR0 -S4B0, 32, // SPI1 BAR0 -S5B0, 32, // UART0 BAR0 -S6B0, 32, // UART1 BAR0 -S7B0, 32, // SDIO BAR0 -S8B0, 32, // ADSP BAR0 +S0B0, 32, // I2C0 BAR0 +S1B0, 32, // I2C1 BAR0 +S2B0, 32, // I2C2 BAR0 +S3B0, 32, // I2C3 BAR0 +S4B0, 32, // I2C4 BAR0 +S5B0, 32, // I2C5 BAR0 +S6B0, 32, // SPI0 BAR0 +S7B0, 32, // SPI1 BAR0 +S8B0, 32, // UART0 BAR0 +S9B0, 32, // UART1 BAR0 +SAB0, 32, // UART2 BAR0 /* BAR 1 */ +S0B1, 32, // I2C0 BAR1 +S1B1, 32, // I2C1 BAR1 +S2B1, 32, // I2C2 BAR1 +S3B1, 32, // I2C3 BAR1 +S4B1, 32, // I2C4 BAR1 +S5B1, 32, // I2C5 BAR1 +S6B1, 32, // SPI0 BAR1 +S7B1, 32, // SPI1 BAR1 +S8B1, 32, // UART0 BAR1 +S9B1, 32, // UART1 BAR1 +SAB1, 32, // UART2 BAR1 -S0B1, 32, // DMA BAR1 -S1B1, 32, // I2C0 BAR1 -S2B1, 32, // I2C1 BAR1 -S3B1, 32, // SPI0 BAR1 -S4B1, 32, // SPI1 BAR1 -S5B1, 32, // UART0 BAR1 -S6B1, 32, // UART1 BAR1 -S7B1, 32, // SDIO BAR1 -S8B1, 32, // ADSP BAR1 diff --git a/src/soc/intel/skylake/acpi/ehci.asl b/src/soc/intel/skylake/acpi/ehci.asl deleted file mode 100644 index a2e704f..0000000 --- a/src/soc/intel/skylake/acpi/ehci.asl +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -// EHCI Controller 0:1d.0 - -Device (EHCI) -{ - Name(_ADR, 0x001d0000) - Name (_PRW, Package(){ 0x6d, 3 }) - - // Leave USB ports on for to allow Wake from USB - - Method(_S3D,0) // Highest D State in S3 State - { - Return (2) - } - - Method(_S4D,0) // Highest D State in S4 State - { - Return (2) - } - - Device (HUB7) - { - Name (_ADR, 0x00000000) - - // How many are there? - Device (PRT1) { Name (_ADR, 1) } // USB Port 0 - Device (PRT2) { Name (_ADR, 2) } // USB Port 1 - Device (PRT3) { Name (_ADR, 3) } // USB Port 2 - Device (PRT4) { Name (_ADR, 4) } // USB Port 3 - Device (PRT5) { Name (_ADR, 5) } // USB Port 4 - Device (PRT6) { Name (_ADR, 6) } // USB Port 5 - } -} diff --git a/src/soc/intel/skylake/acpi/globalnvs.asl b/src/soc/intel/skylake/acpi/globalnvs.asl index 223d21a..3df40cd 100644 --- a/src/soc/intel/skylake/acpi/globalnvs.asl +++ b/src/soc/intel/skylake/acpi/globalnvs.asl @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ /* Global Variables */ @@ -29,8 +30,7 @@ Name (\PICM, 0) // IOAPIC/8259 * we have to fix it up in coreboot's ACPI creation phase. */ -External(NVSA) -OperationRegion (GNVS, SystemMemory, NVSA, 0x2000) +OperationRegion (GNVS, SystemMemory, 0xC0DEBABE, 0x2000) Field (GNVS, ByteAcc, NoLock, Preserve) { /* Miscellaneous */ @@ -62,6 +62,18 @@ Field (GNVS, ByteAcc, NoLock, Preserve) CBMC, 32, // 0x1c - 0x1f - Coreboot Memory Console PM1I, 64, // 0x20 - 0x27 - PM1 wake status bit GPEI, 64, // 0x28 - 0x2f - GPE wake status bit + RPA1, 32, // 0x30 - 0x33 - Root port address 1 + RPA2, 32, // 0x34 - 0x37 - Root port address 2 + RPA3, 32, // 0x38 - 0x3b - Root port address 3 + RPA4, 32, // 0x3c - 0x3f - Root port address 4 + RPA5, 32, // 0x40 - 0x43 - Root port address 5 + RPA6, 32, // 0x44 - 0x47 - Root port address 6 + RPA7, 32, // 0x48 - 0x4b - Root port address 7 + RPA8, 32, // 0x4c - 0x4f - Root port address 8 + RPA9, 32, // 0x50 - 0x53 - Root port address 9 + RPAA, 32, // 0x54 - 0x57 - Root port address 10 + RPAB, 32, // 0x58 - 0x5b - Root port address 11 + RPAC, 32, // 0x5c - 0x5f - Root port address 12 /* ChromeOS specific */ Offset (0x100), @@ -72,18 +84,6 @@ Field (GNVS, ByteAcc, NoLock, Preserve) #include "device_nvs.asl" } -/* Set flag to enable USB charging in S3 */ -Method (S3UE) -{ - Store (One, \S3U0) -} - -/* Set flag to disable USB charging in S3 */ -Method (S3UD) -{ - Store (Zero, \S3U0) -} - /* Set flag to enable USB charging in S5 */ Method (S5UE) { @@ -95,15 +95,3 @@ Method (S5UD) { Store (Zero, \S5U0) } - -/* Set flag to enable 3G module in S3 */ -Method (S3GE) -{ - Store (One, \S33G) -} - -/* Set flag to disable 3G module in S3 */ -Method (S3GD) -{ - Store (Zero, \S33G) -} diff --git a/src/soc/intel/skylake/acpi/gpio.asl b/src/soc/intel/skylake/acpi/gpio.asl index c6d8753..69ee721 100644 --- a/src/soc/intel/skylake/acpi/gpio.asl +++ b/src/soc/intel/skylake/acpi/gpio.asl @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ Device (GPIO) @@ -22,13 +23,8 @@ Device (GPIO) // GPIO Controller Method (_HID) { - If (\ISWP ()) { - // WildcatPoint - Return ("INT3437") - } - - // LynxPoint-LP - Return ("INT33C7") + //Sunrisepoint-LP PCH + Return ("INT344B") } Name (_UID, 1) diff --git a/src/soc/intel/skylake/acpi/hda.asl b/src/soc/intel/skylake/acpi/hda.asl deleted file mode 100644 index 2173661..0000000 --- a/src/soc/intel/skylake/acpi/hda.asl +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Intel PCH HDA */ - -// Intel High Definition Audio (Azalia) 0:1b.0 - -Device (HDEF) -{ - Name (_ADR, 0x001b0000) - Name (_PRW, Package () { 0x6d, 3 }) -} diff --git a/src/soc/intel/skylake/acpi/irqlinks.asl b/src/soc/intel/skylake/acpi/irqlinks.asl index ba550e2..1f6e623 100644 --- a/src/soc/intel/skylake/acpi/irqlinks.asl +++ b/src/soc/intel/skylake/acpi/irqlinks.asl @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ Device (LNKA) @@ -26,14 +27,14 @@ Device (LNKA) // Disable method Method (_DIS, 0, Serialized) { - Store (0x80, PRTA) + Or (\_SB.PARC, 0x80, \_SB.PARC) } // Possible Resource Settings for this Link Name (_PRS, ResourceTemplate() { IRQ (Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } + { 3, 4, 5, 6, 10, 12, 14, 15 } }) // Current Resource Settings for this link @@ -49,7 +50,7 @@ Device (LNKA) Store (Zero, IRQ0) // Set the bit from PRTA - ShiftLeft (1, And (PRTA, 0x0f), IRQ0) + ShiftLeft (1, And (\_SB.PARC, 0x0f), IRQ0) Return (RTLA) } @@ -63,13 +64,13 @@ Device (LNKA) FindSetRightBit (IRQ0, Local0) Decrement(Local0) - Store (Local0, PRTA) + Store (Local0, \_SB.PARC) } // Status Method (_STA, 0, Serialized) { - If(And (PRTA, 0x80)) { + If(And (\_SB.PARC, 0x80)) { Return (0x9) } Else { Return (0xb) @@ -85,14 +86,14 @@ Device (LNKB) // Disable method Method (_DIS, 0, Serialized) { - Store (0x80, PRTB) + Or (\_SB.PBRC, 0x80, \_SB.PBRC) } // Possible Resource Settings for this Link Name (_PRS, ResourceTemplate() { IRQ (Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } + { 3, 4, 5, 6, 10, 12, 14, 15 } }) // Current Resource Settings for this link @@ -108,7 +109,7 @@ Device (LNKB) Store (Zero, IRQ0) // Set the bit from PRTB - ShiftLeft (1, And (PRTB, 0x0f), IRQ0) + ShiftLeft (1, And (\_SB.PBRC, 0x0f), IRQ0) Return (RTLB) } @@ -122,13 +123,13 @@ Device (LNKB) FindSetRightBit (IRQ0, Local0) Decrement(Local0) - Store (Local0, PRTB) + Store (Local0, \_SB.PBRC) } // Status Method (_STA, 0, Serialized) { - If(And (PRTB, 0x80)) { + If(And (\_SB.PBRC, 0x80)) { Return (0x9) } Else { Return (0xb) @@ -144,14 +145,14 @@ Device (LNKC) // Disable method Method (_DIS, 0, Serialized) { - Store (0x80, PRTC) + Or (\_SB.PCRC, 0x80, \_SB.PCRC) } // Possible Resource Settings for this Link Name (_PRS, ResourceTemplate() { IRQ (Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } + { 3, 4, 5, 6, 10, 12, 14, 15 } }) // Current Resource Settings for this link @@ -167,7 +168,7 @@ Device (LNKC) Store (Zero, IRQ0) // Set the bit from PRTC - ShiftLeft (1, And (PRTC, 0x0f), IRQ0) + ShiftLeft (1, And (\_SB.PCRC, 0x0f), IRQ0) Return (RTLC) } @@ -181,13 +182,13 @@ Device (LNKC) FindSetRightBit (IRQ0, Local0) Decrement(Local0) - Store (Local0, PRTC) + Store (Local0, \_SB.PCRC) } // Status Method (_STA, 0, Serialized) { - If(And (PRTC, 0x80)) { + If(And (\_SB.PCRC, 0x80)) { Return (0x9) } Else { Return (0xb) @@ -203,14 +204,14 @@ Device (LNKD) // Disable method Method (_DIS, 0, Serialized) { - Store (0x80, PRTD) + Or (\_SB.PDRC, 0x80, \_SB.PDRC) } // Possible Resource Settings for this Link Name (_PRS, ResourceTemplate() { IRQ (Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } + { 3, 4, 5, 6, 10, 12, 14, 15 } }) // Current Resource Settings for this link @@ -226,7 +227,7 @@ Device (LNKD) Store (Zero, IRQ0) // Set the bit from PRTD - ShiftLeft (1, And (PRTD, 0x0f), IRQ0) + ShiftLeft (1, And (\_SB.PDRC, 0x0f), IRQ0) Return (RTLD) } @@ -240,13 +241,13 @@ Device (LNKD) FindSetRightBit (IRQ0, Local0) Decrement(Local0) - Store (Local0, PRTD) + Store (Local0, \_SB.PDRC) } // Status Method (_STA, 0, Serialized) { - If(And (PRTD, 0x80)) { + If(And (\_SB.PDRC, 0x80)) { Return (0x9) } Else { Return (0xb) @@ -262,14 +263,14 @@ Device (LNKE) // Disable method Method (_DIS, 0, Serialized) { - Store (0x80, PRTE) + Or (\_SB.PERC, 0x80, \_SB.PERC) } // Possible Resource Settings for this Link Name (_PRS, ResourceTemplate() { IRQ (Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } + { 3, 4, 5, 6, 10, 12, 14, 15 } }) // Current Resource Settings for this link @@ -285,7 +286,7 @@ Device (LNKE) Store (Zero, IRQ0) // Set the bit from PRTE - ShiftLeft (1, And (PRTE, 0x0f), IRQ0) + ShiftLeft (1, And (\_SB.PERC, 0x0f), IRQ0) Return (RTLE) } @@ -299,13 +300,13 @@ Device (LNKE) FindSetRightBit (IRQ0, Local0) Decrement(Local0) - Store (Local0, PRTE) + Store (Local0, \_SB.PERC) } // Status Method (_STA, 0, Serialized) { - If(And (PRTE, 0x80)) { + If(And (\_SB.PERC, 0x80)) { Return (0x9) } Else { Return (0xb) @@ -321,14 +322,14 @@ Device (LNKF) // Disable method Method (_DIS, 0, Serialized) { - Store (0x80, PRTF) + Or (\_SB.PFRC, 0x80, \_SB.PFRC) } // Possible Resource Settings for this Link Name (_PRS, ResourceTemplate() { IRQ (Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } + { 3, 4, 5, 6, 10, 12, 14, 15 } }) // Current Resource Settings for this link @@ -344,7 +345,7 @@ Device (LNKF) Store (Zero, IRQ0) // Set the bit from PRTF - ShiftLeft (1, And (PRTF, 0x0f), IRQ0) + ShiftLeft (1, And (\_SB.PFRC, 0x0f), IRQ0) Return (RTLF) } @@ -358,13 +359,13 @@ Device (LNKF) FindSetRightBit (IRQ0, Local0) Decrement(Local0) - Store (Local0, PRTF) + Store (Local0, \_SB.PFRC) } // Status Method (_STA, 0, Serialized) { - If(And (PRTF, 0x80)) { + If(And (\_SB.PFRC, 0x80)) { Return (0x9) } Else { Return (0xb) @@ -380,14 +381,14 @@ Device (LNKG) // Disable method Method (_DIS, 0, Serialized) { - Store (0x80, PRTG) + Or (\_SB.PGRC, 0x80, \_SB.PGRC) } // Possible Resource Settings for this Link Name (_PRS, ResourceTemplate() { IRQ (Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } + { 3, 4, 5, 6, 10, 12, 14, 15 } }) // Current Resource Settings for this link @@ -403,7 +404,7 @@ Device (LNKG) Store (Zero, IRQ0) // Set the bit from PRTG - ShiftLeft (1, And (PRTG, 0x0f), IRQ0) + ShiftLeft (1, And (\_SB.PGRC, 0x0f), IRQ0) Return (RTLG) } @@ -417,13 +418,13 @@ Device (LNKG) FindSetRightBit (IRQ0, Local0) Decrement(Local0) - Store (Local0, PRTG) + Store (Local0, \_SB.PGRC) } // Status Method (_STA, 0, Serialized) { - If(And (PRTG, 0x80)) { + If(And (\_SB.PGRC, 0x80)) { Return (0x9) } Else { Return (0xb) @@ -439,14 +440,14 @@ Device (LNKH) // Disable method Method (_DIS, 0, Serialized) { - Store (0x80, PRTH) + Or (\_SB.PHRC, 0x80, \_SB.PHRC) } // Possible Resource Settings for this Link Name (_PRS, ResourceTemplate() { IRQ (Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } + { 3, 4, 5, 6, 10, 12, 14, 15 } }) // Current Resource Settings for this link @@ -462,7 +463,7 @@ Device (LNKH) Store (Zero, IRQ0) // Set the bit from PRTH - ShiftLeft (1, And (PRTH, 0x0f), IRQ0) + ShiftLeft (1, And (\_SB.PHRC, 0x0f), IRQ0) Return (RTLH) } @@ -476,13 +477,13 @@ Device (LNKH) FindSetRightBit (IRQ0, Local0) Decrement(Local0) - Store (Local0, PRTH) + Store (Local0, \_SB.PHRC) } // Status Method (_STA, 0, Serialized) { - If(And (PRTH, 0x80)) { + If(And (\_SB.PHRC, 0x80)) { Return (0x9) } Else { Return (0xb) diff --git a/src/soc/intel/skylake/acpi/itss.asl b/src/soc/intel/skylake/acpi/itss.asl new file mode 100644 index 0000000..8ba9513 --- /dev/null +++ b/src/soc/intel/skylake/acpi/itss.asl @@ -0,0 +1,96 @@ +/* + * This file is part of the coreboot project. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* ITSS */ +/* Define the needed ITSS registers used by ASL on Interrupt */ + +Scope (\_SB) +{ + OperationRegion (ITSS, SystemMemory, 0xfdc43100, 0x8) + Field (ITSS, ByteAcc, NoLock, Preserve) + { + PARC, 8, + PBRC, 8, + PCRC, 8, + PDRC, 8, + PERC, 8, + PFRC, 8, + PGRC, 8, + PHRC, 8, + } + + /* + * Pin# = group_pad# + group# * 24. + * For instance, GPP_A_6 would be pin#6, + * GPP_D_23 would be 23+(3*24), pin#95. + */ + Name (GPPG, Package (0x02) + { + Package (0x08) + { + 0x18, + 0x18, + 0x18, + 0x18, + 0x18, + 0x18, + 0x08, + 0x0C + }, + + Package (0x0A) + { + 0x18, + 0x18, + 0x18, + 0x18, + 0x0D, + 0x18, + 0x18, + 0x18, + 0x0B, + 0x0C + } + }) + + Method (GNMB, 1, Serialized) + { + Return (And (Arg0, 0xFFFF)) + } + + Method (GGRP, 1, Serialized) + { + ShiftRight (And (Arg0, 0x00FF0000), 0x10, Local0) + Return (Local0) + } + + /* Convert GPIO PAD name to GPIO number */ + Method (INUM, 1, NotSerialized) + { + Store (One, Local0) + Store (GNMB (Arg0), Local1) + Store (GGRP (Arg0), Local2) + Store (Zero, Local3) + + While (LLess (Local3, Local2)) + { + Add (DerefOf (Index (DerefOf (Index + (GPPG, Local0)), Local3)), + Local1, Local1) + Increment (Local3) + } + + Return (Add (0x18, Mod (Local1, 0x60))) + } +} diff --git a/src/soc/intel/skylake/acpi/lpc.asl b/src/soc/intel/skylake/acpi/lpc.asl index 2b574f7..8332980 100644 --- a/src/soc/intel/skylake/acpi/lpc.asl +++ b/src/soc/intel/skylake/acpi/lpc.asl @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,9 +16,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ +#include <soc/iomap.h> + // Intel LPC Bus Device - 0:1f.0 Device (LPCB) @@ -33,16 +36,7 @@ Device (LPCB) PMBS, 16, // PMBASE Offset (0x48), GPBS, 16, // GPIOBASE - Offset (0x60), // Interrupt Routing Registers - PRTA, 8, - PRTB, 8, - PRTC, 8, - PRTD, 8, - Offset (0x68), - PRTE, 8, - PRTF, 8, - PRTG, 8, - PRTH, 8, + Offset (0x80), // IO Decode Ranges IOD0, 8, @@ -74,48 +68,22 @@ Device (LPCB) Device (HPET) { Name (_HID, EISAID("PNP0103")) - Name (_CID, 0x010CD041) - Name (BUF0, ResourceTemplate() { - Memory32Fixed(ReadOnly, 0xfed00000, 0x400, FED0) + Memory32Fixed(ReadOnly, HPET_BASE_ADDRESS, 0x400, FED0) }) Method (_STA, 0) // Device Status { - If (HPTE) { - // Note: Ancient versions of Windows don't want - // to see the HPET in order to work right - If (LGreaterEqual(OSYS, 2001)) { - Return (0xf) // Enable and show device - } Else { - Return (0xb) // Enable and don't show device - } - } - - Return (0x0) // Not enabled, don't show. + Return (0xf) } - Method (_CRS, 0, Serialized) // Current resources { - If (HPTE) { - CreateDWordField (BUF0, - \_SB.PCI0.LPCB.HPET.FED0._BAS, HPT0) - - If (Lequal(HPAS, 1)) { - Store(0xfed01000, HPT0) - } - - If (Lequal(HPAS, 2)) { - Store(0xfed02000, HPT0) - } - - If (Lequal(HPAS, 3)) { - Store(0xfed03000, HPT0) - } - } + CreateDWordField (BUF0, ^FED0._BAS, HPT0) + /* TODO: Base address configured need to pass as GNVS */ + Store(HPET_BASE_ADDRESS, HPT0) - Return (BUF0) + Return(BUF0) } } diff --git a/src/soc/intel/skylake/acpi/pch.asl b/src/soc/intel/skylake/acpi/pch.asl index 998133d..2621eb2 100644 --- a/src/soc/intel/skylake/acpi/pch.asl +++ b/src/soc/intel/skylake/acpi/pch.asl @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,78 +16,47 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <soc/iomap.h> Scope (\) { - // IO-Trap at 0x800. This is the ACPI->SMI communication interface. + /* IO-Trap at 0x800. + * This is the ACPI->SMI communication interface. + */ OperationRegion (IO_T, SystemIO, 0x800, 0x10) Field (IO_T, ByteAcc, NoLock, Preserve) { Offset (0x8), - TRP0, 8 // IO-Trap at 0x808 - } - - // Root Complex Register Block - OperationRegion (RCRB, SystemMemory, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE) - Field (RCRB, DWordAcc, Lock, Preserve) - { - Offset (0x3404), // High Performance Timer Configuration - HPAS, 2, // Address Select - , 5, - HPTE, 1, // Address Enable - } - - /* - * Check PCH type - * Return 1 if PCH is WildcatPoint - * Return 0 if PCH is LynxPoint - */ - Method (ISWP) - { - And (\_SB.PCI0.LPCB.PDID, 0xfff0, Local0) - If (LEqual (Local0, 0x9cc0)) { - Return (1) - } Else { - Return (0) - } + TRP0, 8 /* IO-Trap at 0x808 */ } } -// High Definition Audio (Azalia) 0:1b.0 -#include "hda.asl" - -// ADSP/SST 0:13.0 -#include "adsp.asl" - -// PCI Express Ports 0:1c.x +/* PCI Express Ports 0:1c.x */ #include "pcie.asl" -// USB EHCI 0:1d.0 -#include "ehci.asl" - -// USB XHCI 0:14.0 +/* USB XHCI 0:14.0 */ #include "xhci.asl" -// LPC Bridge 0:1f.0 +/* LPC Bridge 0:1f.0 */ #include "lpc.asl" -// SATA 0:1f.2 -#include "sata.asl" - -// SMBus 0:1f.3 +/* SMBus 0:1f.3 */ #include "smbus.asl" -// Serial IO +/* Serial IO */ #include "serialio.asl" +/* Interrupt Routing */ +#include "itss.asl" +#include "irqlinks.asl" + Method (_OSC, 4) { /* Check for proper GUID */ - If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) + If (LEqual (Arg0, ToUUID ("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) { /* Let OS control everything */ Return (Arg3) diff --git a/src/soc/intel/skylake/acpi/pci_irqs.asl b/src/soc/intel/skylake/acpi/pci_irqs.asl index 0c23e10..c43e42d 100644 --- a/src/soc/intel/skylake/acpi/pci_irqs.asl +++ b/src/soc/intel/skylake/acpi/pci_irqs.asl @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,74 +16,127 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ Method(_PRT) { If (PICM) { Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // Mini-HD Audio 0:3.0 - Package() { 0x0003ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 16 }, - Package() { 0x001cffff, 1, 0, 17 }, - Package() { 0x001cffff, 2, 0, 18 }, - Package() { 0x001cffff, 3, 0, 19 }, - // EHCI 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 }, - // Audio DSP (Smart Sound) 0:13.0 - Package() { 0x0013ffff, 0, 0, 23 }, - // XHCI 0:14.0 - Package() { 0x0014ffff, 0, 0, 18 }, - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 22 }, - Package() { 0x001fffff, 1, 0, 18 }, - Package() { 0x001fffff, 2, 0, 17 }, - Package() { 0x001fffff, 3, 0, 16 }, - // Serial IO 0:15.0 - Package() { 0x0015ffff, 0, 0, 20 }, - Package() { 0x0015ffff, 1, 0, 21 }, - Package() { 0x0015ffff, 2, 0, 21 }, - Package() { 0x0015ffff, 3, 0, 21 }, - // SDIO 0:17.0 - Package() { 0x0017ffff, 0, 0, 23 }, + /* PCI Bridge */ + /* D31: cAVS, SMBus, GbE, Nothpeak */ + Package(){0x001FFFFF, 0, 0, 16 }, + Package(){0x001FFFFF, 1, 0, 17 }, + Package(){0x001FFFFF, 2, 0, 18 }, + Package(){0x001FFFFF, 3, 0, 19 }, + /* D30: SerialIo and SCS */ + Package(){0x001EFFFF, 0, 0, 20 }, + Package(){0x001EFFFF, 1, 0, 21 }, + Package(){0x001EFFFF, 2, 0, 22 }, + Package(){0x001EFFFF, 3, 0, 23 }, + /* D29: PCI Express Port 9-16 */ + Package(){0x001DFFFF, 0, 0, 16 }, + Package(){0x001DFFFF, 1, 0, 17 }, + Package(){0x001DFFFF, 2, 0, 18 }, + Package(){0x001DFFFF, 3, 0, 19 }, + /* D28: PCI Express Port 1-8 */ + Package(){0x001CFFFF, 0, 0, 16 }, + Package(){0x001CFFFF, 1, 0, 17 }, + Package(){0x001CFFFF, 2, 0, 18 }, + Package(){0x001CFFFF, 3, 0, 19 }, + /* D27: PCI Express Port 17-20 */ + Package(){0x001BFFFF, 0, 0, 16 }, + Package(){0x001BFFFF, 1, 0, 17 }, + Package(){0x001BFFFF, 2, 0, 18 }, + Package(){0x001BFFFF, 3, 0, 19 }, + /* D25: SerialIo */ + Package(){0x0019FFFF, 0, 0, 32 }, + Package(){0x0019FFFF, 1, 0, 33 }, + Package(){0x0019FFFF, 2, 0, 34 }, + /* D22: CSME (HECI, IDE-R, Keyboard and Text redirection */ + Package(){0x0016FFFF, 0, 0, 16 }, + Package(){0x0016FFFF, 1, 0, 17 }, + Package(){0x0016FFFF, 2, 0, 18 }, + Package(){0x0016FFFF, 3, 0, 19 }, + /* D21: SerialIo */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + /* D20: xHCI, OTG, + * Thermal Subsystem, Camera IO Host Controller + */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* D19: Integrated Sensor Hub */ + Package(){0x0013FFFF, 0, 0, 20 }, + + /* Host Bridge */ + /* P.E.G. Root Port D1F0 */ + Package(){0x0001FFFF, 0, 0, 16 }, + Package(){0x0001FFFF, 1, 0, 17 }, + Package(){0x0001FFFF, 2, 0, 18 }, + Package(){0x0001FFFF, 3, 0, 19 }, + /* P.E.G. Root Port D1F1 */ + /* P.E.G. Root Port D1F2 */ + /* SA IGFX Device */ + Package(){0x0002FFFF, 0, 0, 16 }, + /* SA Thermal Device */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* SA SkyCam Device */ + Package(){0x0005FFFF, 0, 0, 16 }, + /* SA GMM Device */ + Package(){0x0008FFFF, 0, 0, 16 }, }) } Else { Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // Mini-HD Audio 0:3.0 - Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, - // EHCI 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - // Audio DSP (Smart Sound) 0:13.0 - Package() { 0x0013ffff, 0, \_SB.PCI0.LPCB.LNKH, 0 }, - // XHCI 0:14.0 - Package() { 0x0014ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }, - // Serial IO 0:15.0 - Package() { 0x0015ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, - Package() { 0x0015ffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x0015ffff, 2, \_SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x0015ffff, 3, \_SB.PCI0.LPCB.LNKF, 0 }, - // SDIO 0:17.0 - Package() { 0x0017ffff, 0, \_SB.PCI0.LPCB.LNKH, 0 }, + /* D31 */ + Package() { 0x001fffff, 0, \_SB.PCI0.LNKA, 0 }, + Package() { 0x001fffff, 1, \_SB.PCI0.LNKB, 0 }, + Package() { 0x001fffff, 2, \_SB.PCI0.LNKC, 0 }, + Package() { 0x001fffff, 3, \_SB.PCI0.LNKD, 0 }, + /* D29 */ + Package() { 0x001dffff, 0, \_SB.PCI0.LNKA, 0 }, + Package() { 0x001dffff, 1, \_SB.PCI0.LNKB, 0 }, + Package() { 0x001dffff, 2, \_SB.PCI0.LNKC, 0 }, + Package() { 0x001dffff, 3, \_SB.PCI0.LNKD, 0 }, + /* D28 */ + Package() { 0x001cffff, 0, \_SB.PCI0.LNKA, 0 }, + Package() { 0x001cffff, 1, \_SB.PCI0.LNKB, 0 }, + Package() { 0x001cffff, 2, \_SB.PCI0.LNKC, 0 }, + Package() { 0x001cffff, 3, \_SB.PCI0.LNKD, 0 }, + /* D27 */ + Package() { 0x001bffff, 0, \_SB.PCI0.LNKA, 0 }, + Package() { 0x001bffff, 1, \_SB.PCI0.LNKB, 0 }, + Package() { 0x001bffff, 2, \_SB.PCI0.LNKC, 0 }, + Package() { 0x001bffff, 3, \_SB.PCI0.LNKD, 0 }, + /* D23 */ + Package() { 0x0017ffff, 0, \_SB.PCI0.LNKA, 0 }, + /* D22 */ + Package() { 0x0016ffff, 0, \_SB.PCI0.LNKA, 0 }, + Package() { 0x0016ffff, 1, \_SB.PCI0.LNKB, 0 }, + Package() { 0x0016ffff, 2, \_SB.PCI0.LNKC, 0 }, + Package() { 0x0016ffff, 3, \_SB.PCI0.LNKD, 0 }, + /* D20 */ + Package() { 0x0014ffff, 0, \_SB.PCI0.LNKA, 0 }, + Package() { 0x0014ffff, 1, \_SB.PCI0.LNKB, 0 }, + Package() { 0x0014ffff, 2, \_SB.PCI0.LNKC, 0 }, + Package() { 0x0014ffff, 3, \_SB.PCI0.LNKD, 0 }, + /* Host bridge */ + Package() { 0x0001ffff, 0, \_SB.PCI0.LNKA, 0 }, + Package() { 0x0001ffff, 1, \_SB.PCI0.LNKB, 0 }, + Package() { 0x0001ffff, 2, \_SB.PCI0.LNKC, 0 }, + Package() { 0x0001ffff, 3, \_SB.PCI0.LNKD, 0 }, + /* SA IGFX Device */ + Package() { 0x0002ffff, 0, \_SB.PCI0.LNKA, 0 }, + /* SA Thermal Device */ + Package() { 0x0004ffff, 0, \_SB.PCI0.LNKA, 0 }, + /* SA Skycam Device */ + Package() { 0x0005ffff, 0, \_SB.PCI0.LNKA, 0 }, + /* SA GMM Device */ + Package() { 0x0008ffff, 0, \_SB.PCI0.LNKA, 0 }, }) } } diff --git a/src/soc/intel/skylake/acpi/pcie.asl b/src/soc/intel/skylake/acpi/pcie.asl index a48bdde..7ab78e0 100644 --- a/src/soc/intel/skylake/acpi/pcie.asl +++ b/src/soc/intel/skylake/acpi/pcie.asl @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ /* Intel PCH PCIe support */ @@ -29,10 +30,10 @@ Method (IRQM, 1, Serialized) { Package() { 0x0000ffff, 2, 0, 18 }, Package() { 0x0000ffff, 3, 0, 19 } }) Name (IQAP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 } }) + Package() { 0x0000ffff, 0, \_SB.PCI0.LNKA, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LNKB, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LNKC, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LNKD, 0 } }) /* Interrupt Map INTA->INTB, INTB->INTC, INTC->INTD, INTD->INTA */ Name (IQBA, Package() { @@ -41,10 +42,10 @@ Method (IRQM, 1, Serialized) { Package() { 0x0000ffff, 2, 0, 19 }, Package() { 0x0000ffff, 3, 0, 16 } }) Name (IQBP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 } }) + Package() { 0x0000ffff, 0, \_SB.PCI0.LNKB, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LNKC, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LNKD, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LNKA, 0 } }) /* Interrupt Map INTA->INTC, INTB->INTD, INTC->INTA, INTD->INTB */ Name (IQCA, Package() { @@ -53,10 +54,10 @@ Method (IRQM, 1, Serialized) { Package() { 0x0000ffff, 2, 0, 16 }, Package() { 0x0000ffff, 3, 0, 17 } }) Name (IQCP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKB, 0 } }) + Package() { 0x0000ffff, 0, \_SB.PCI0.LNKC, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LNKD, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LNKA, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LNKB, 0 } }) /* Interrupt Map INTA->INTD, INTB->INTA, INTC->INTB, INTD->INTC */ Name (IQDA, Package() { @@ -65,10 +66,10 @@ Method (IRQM, 1, Serialized) { Package() { 0x0000ffff, 2, 0, 17 }, Package() { 0x0000ffff, 3, 0, 18 } }) Name (IQDP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKC, 0 } }) + Package() { 0x0000ffff, 0, \_SB.PCI0.LNKD, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LNKA, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LNKB, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LNKC, 0 } }) Switch (ToInteger (Arg0)) { /* PCIe Root Port 1 and 5 */ @@ -121,11 +122,9 @@ Device (RP01) { Name (_ADR, 0x001c0000) - #include "pcie_port.asl" - Method (_PRT) { - Return (IRQM (RPPN)) + Return (IRQM (RPA1)) } } @@ -133,11 +132,9 @@ Device (RP02) { Name (_ADR, 0x001c0001) - #include "pcie_port.asl" - Method (_PRT) { - Return (IRQM (RPPN)) + Return (IRQM (RPA2)) } } @@ -145,11 +142,9 @@ Device (RP03) { Name (_ADR, 0x001c0002) - #include "pcie_port.asl" - Method (_PRT) { - Return (IRQM (RPPN)) + Return (IRQM (RPA3)) } } @@ -157,11 +152,9 @@ Device (RP04) { Name (_ADR, 0x001c0003) - #include "pcie_port.asl" - Method (_PRT) { - Return (IRQM (RPPN)) + Return (IRQM (RPA4)) } } @@ -169,11 +162,9 @@ Device (RP05) { Name (_ADR, 0x001c0004) - #include "pcie_port.asl" - Method (_PRT) { - Return (IRQM (RPPN)) + Return (IRQM (RPA5)) } } @@ -181,11 +172,9 @@ Device (RP06) { Name (_ADR, 0x001c0005) - #include "pcie_port.asl" - Method (_PRT) { - Return (IRQM (RPPN)) + Return (IRQM (RPA6)) } } @@ -193,11 +182,9 @@ Device (RP07) { Name (_ADR, 0x001c0006) - #include "pcie_port.asl" - Method (_PRT) { - Return (IRQM (RPPN)) + Return (IRQM (RPA7)) } } @@ -205,10 +192,48 @@ Device (RP08) { Name (_ADR, 0x001c0007) - #include "pcie_port.asl" - Method (_PRT) { - Return (IRQM (RPPN)) + Return (IRQM (RPA8)) } } +Device (RP09) +{ + Name (_ADR, 0x001D0000) + + Method (_PRT) + { + Return (IRQM (RPA9)) + } +} + +Device (RP10) +{ + Name (_ADR, 0x001D0001) + + Method (_PRT) + { + Return (IRQM (RPAA)) + } +} + +Device (RP11) +{ + Name (_ADR, 0x001D0002) + + Method (_PRT) + { + Return (IRQM (RPAB)) + } +} + +Device (RP12) +{ + Name (_ADR, 0x001D0003) + + Method (_PRT) + { + Return (IRQM (RPAC)) + } +} + diff --git a/src/soc/intel/skylake/acpi/pcie_port.asl b/src/soc/intel/skylake/acpi/pcie_port.asl deleted file mode 100644 index 3226746..0000000 --- a/src/soc/intel/skylake/acpi/pcie_port.asl +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Included in each PCIe Root Port device */ - -OperationRegion (RPCS, PCI_Config, 0x00, 0xFF) -Field (RPCS, AnyAcc, NoLock, Preserve) -{ - Offset (0x4c), // Link Capabilities - , 24, - RPPN, 8, // Root Port Number -} diff --git a/src/soc/intel/skylake/acpi/platform.asl b/src/soc/intel/skylake/acpi/platform.asl index f63168a..2bbe97b 100644 --- a/src/soc/intel/skylake/acpi/platform.asl +++ b/src/soc/intel/skylake/acpi/platform.asl @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ /* The APM port can be used for generating software SMIs */ @@ -43,7 +44,8 @@ Method (TRAP, 1, Serialized) Return (SMIF) // Return value of SMI handler } -/* The _PIC method is called by the OS to choose between interrupt +/* + * The _PIC method is called by the OS to choose between interrupt * routing via the i8259 interrupt controller or the APIC. * * _PIC is called with a parameter of 0 for i8259 configuration and diff --git a/src/soc/intel/skylake/acpi/sata.asl b/src/soc/intel/skylake/acpi/sata.asl deleted file mode 100644 index 0af2a3f..0000000 --- a/src/soc/intel/skylake/acpi/sata.asl +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -// Intel SATA Controller 0:1f.2 -Device (SATA) -{ - Name (_ADR, 0x001f0002) -} diff --git a/src/soc/intel/skylake/acpi/serialio.asl b/src/soc/intel/skylake/acpi/serialio.asl index 7ffc671..203dbef 100644 --- a/src/soc/intel/skylake/acpi/serialio.asl +++ b/src/soc/intel/skylake/acpi/serialio.asl @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,20 +15,22 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ +#include <soc/irq.h> // Intel Serial IO Devices in ACPI Mode -// Serial IO Device BAR0 and BAR1 is 4KB +/* Serial IO Device BAR0 and BAR1 is 4KB */ #define SIO_BAR_LEN 0x1000 -// Put SerialIO device in D0 state -// Arg0 - BAR1 of device -// Arg1 - Set if device is in ACPI mode +/* Put SerialIO device in D0 state */ +/* Arg0 - BAR1 of device */ +/* Arg1 - Set if device is in ACPI mode */ + Method (LPD0, 2, Serialized) { - // PCI mode devices will be handled by OS PCI bus driver + /* PCI mode devices will be handled by OS PCI bus driver */ If (LEqual (Arg1, 0)) { Return } @@ -39,146 +42,80 @@ Method (LPD0, 2, Serialized) } And (SPCS, 0xFFFFFFFC, SPCS) - Store (SPCS, Local0) // Read back after writing + /* Read back after writing */ + Store (SPCS, Local0) } -// Put SerialIO device in D3 state -// Arg0 - BAR1 of device -// Arg1 - Set if device is in ACPI mode +/* Put SerialIO device in D3 state */ +/* Arg0 - BAR1 of device */ +/* Arg1 - Set if device is in ACPI mode */ + Method (LPD3, 2, Serialized) { - // PCI mode devices will be handled by OS PCI bus driver + /* PCI mode devices will be handled by OS PCI bus driver */ If (LEqual (Arg1, 0)) { Return } - OperationRegion (SPRT, SystemMemory, Add (Arg0, 0x84), 4) Field (SPRT, DWordAcc, NoLock, Preserve) { SPCS, 32 } - Or (SPCS, 0x3, SPCS) Store (SPCS, Local0) // Read back after writing } -// Serial IO Resource Consumption for BAR1 +/* Serial IO Resource Consumption for BAR1 */ Device (SIOR) { Name (_HID, EISAID("PNP0C02")) - Name (_UID, 4) - - Name (RBUF, ResourceTemplate() - { - // Serial IO BAR1 (PCI config space) resources - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D0) // SDMA - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D1) // I2C0 - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D2) // I2C1 - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D3) // SPI0 - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D4) // SPI1 - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D5) // UART0 - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D6) // UART1 - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D7) // SDIO - }) - - // Update BAR1 address and length if set in NVS - Method (_CRS, 0, NotSerialized) + Name (_UID, 5) + Method(ADDB,3,Serialized) { + Name (BUFF, ResourceTemplate() { - // SDMA - If (LNotEqual (\S0B1, Zero)) { - CreateDwordField (^RBUF, ^B1D0._BAS, B0AD) - CreateDwordField (^RBUF, ^B1D0._LEN, B0LN) - Store (\S0B1, B0AD) - Store (SIO_BAR_LEN, B0LN) - } - - // I2C0 - If (LNotEqual (\S1B1, Zero)) { - CreateDwordField (^RBUF, ^B1D1._BAS, B1AD) - CreateDwordField (^RBUF, ^B1D1._LEN, B1LN) - Store (\S1B1, B1AD) - Store (SIO_BAR_LEN, B1LN) - } - - // I2C1 - If (LNotEqual (\S2B1, Zero)) { - CreateDwordField (^RBUF, ^B1D2._BAS, B2AD) - CreateDwordField (^RBUF, ^B1D2._LEN, B2LN) - Store (\S2B1, B2AD) - Store (SIO_BAR_LEN, B2LN) - } - - // SPI0 - If (LNotEqual (\S3B1, Zero)) { - CreateDwordField (^RBUF, ^B1D3._BAS, B3AD) - CreateDwordField (^RBUF, ^B1D3._LEN, B3LN) - Store (\S3B1, B3AD) - Store (SIO_BAR_LEN, B3LN) - } - - // SPI1 - If (LNotEqual (\S4B1, Zero)) { - CreateDwordField (^RBUF, ^B1D4._BAS, B4AD) - CreateDwordField (^RBUF, ^B1D4._LEN, B4LN) - Store (\S4B1, B4AD) - Store (SIO_BAR_LEN, B4LN) - } - - // UART0 - If (LNotEqual (\S5B1, Zero)) { - CreateDwordField (^RBUF, ^B1D5._BAS, B5AD) - CreateDwordField (^RBUF, ^B1D5._LEN, B5LN) - Store (\S5B1, B5AD) - Store (SIO_BAR_LEN, B5LN) - } - - // UART1 - If (LNotEqual (\S6B1, Zero)) { - CreateDwordField (^RBUF, ^B1D6._BAS, B6AD) - CreateDwordField (^RBUF, ^B1D6._LEN, B6LN) - Store (\S6B1, B6AD) - Store (SIO_BAR_LEN, B6LN) - } - - // SDIO - If (LNotEqual (\S7B1, Zero)) { - CreateDwordField (^RBUF, ^B1D7._BAS, B7AD) - CreateDwordField (^RBUF, ^B1D7._LEN, B7LN) - Store (\S7B1, B7AD) - Store (SIO_BAR_LEN, B7LN) - } - - Return (RBUF) + Memory32Fixed (ReadWrite, 0x00000000, 0x1000, BUF) + }) + CreateDWordField(BUFF,BUF._BAS,ADDR) + CreateDWordField(BUFF,BUF._LEN,LENG) + Store(ResourceTemplate(){}, Local0) + //Return (RBUF) } } -Device (SDMA) +Device (I2C0) { - // Serial IO DMA Controller - Name (_HID, "INTL9C60") + /* Serial IO I2C0 Controller */ + Name (_HID,"INT3442") Name (_UID, 1) Name (_ADR, 0x00150000) + Name (SSCN, Package () { 432, 507, 30 }) + Name (FMCN, Package () { 72, 160, 30 }) - // BAR0 is assigned during PCI enumeration and saved into NVS + /* BAR0 is assigned during PCI enumeration and saved into NVS */ Name (RBUF, ResourceTemplate () { Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7} + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) + { LPSS_I2C0_IRQ } }) + /* DMA channels are only used if Serial IO DMA controller is enabled */ + Name (DBUF, ResourceTemplate () + { + FixedDMA (0x18, 4, Width32Bit, DMA1) // Tx + FixedDMA (0x19, 5, Width32Bit, DMA2) // Rx + }) Method (_CRS, 0, NotSerialized) { - // Update BAR0 address and length if set in NVS + /* Update BAR0 address and length if set in NVS */ If (LNotEqual (\S0B0, Zero)) { CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) Store (\S0B0, B0AD) Store (SIO_BAR_LEN, B0LN) } - Return (RBUF) } - Method (_STA, 0, NotSerialized) { If (LEqual (\S0EN, 0)) { @@ -187,59 +124,56 @@ Device (SDMA) Return (0xF) } } -} -Device (I2C0) -{ - // Serial IO I2C0 Controller - Method (_HID) + Method (_PS0, 0, Serialized) { - If (\ISWP ()) { - // WildcatPoint - Return ("INT3432") - } + ^^LPD0 (\S0B1, \S0EN) + } - // LynxPoint-LP - Return ("INT33C2") + Method (_PS3, 0, Serialized) + { + ^^LPD3 (\S0B1, \S0EN) } + +} + +Device (I2C1) +{ + /* Serial IO I2C1 Controller */ + Name (_HID,"INT3443") Name (_UID, 1) Name (_ADR, 0x00150001) + Name (SSCN, Package () { 528, 640, 30 }) + Name (FMCN, Package () { 128, 160, 30 }) + Name (FPCN, Package () { 48, 64, 30}) - Name (SSCN, Package () { 432, 507, 30 }) - Name (FMCN, Package () { 72, 160, 30 }) - - // BAR0 is assigned during PCI enumeration and saved into NVS + /* BAR0 is assigned during PCI enumeration and saved into NVS */ Name (RBUF, ResourceTemplate () { Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7} + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) + { LPSS_I2C1_IRQ } }) - // DMA channels are only used if Serial IO DMA controller is enabled + /* DMA channels are only used if + * Serial IO DMA controller is enabled + */ Name (DBUF, ResourceTemplate () { - FixedDMA (0x18, 4, Width32Bit, DMA1) // Tx - FixedDMA (0x19, 5, Width32Bit, DMA2) // Rx + FixedDMA (0x1A, 6, Width32Bit, DMA1) // Tx + FixedDMA (0x1B, 7, Width32Bit, DMA2) // Rx }) - Method (_CRS, 0, NotSerialized) { - // Update BAR0 address and length if set in NVS + /* Update BAR0 address and length if set in NVS */ If (LNotEqual (\S1B0, Zero)) { CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) Store (\S1B0, B0AD) Store (SIO_BAR_LEN, B0LN) } - - // Check if Serial IO DMA Controller is enabled - If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) { - Return (ConcatenateResTemplate (RBUF, DBUF)) - } Else { - Return (RBUF) - } + Return (RBUF) } - Method (_STA, 0, NotSerialized) { If (LEqual (\S1EN, 0)) { @@ -260,42 +194,36 @@ Device (I2C0) } } -Device (I2C1) -{ - // Serial IO I2C1 Controller - Method (_HID) - { - If (\ISWP ()) { - // WildcatPoint - Return ("INT3433") - } - // LynxPoint-LP - Return ("INT33C3") - } +Device (I2C2) +{ + /* Serial IO I2C1 Controller */ + Name (_HID,"INT3444") Name (_UID, 1) Name (_ADR, 0x00150002) - Name (SSCN, Package () { 432, 507, 30 }) Name (FMCN, Package () { 72, 160, 30 }) - // BAR0 is assigned during PCI enumeration and saved into NVS + /* BAR0 is assigned during PCI enumeration and saved into NVS */ Name (RBUF, ResourceTemplate () { Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7} + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) + { LPSS_I2C2_IRQ } }) - // DMA channels are only used if Serial IO DMA controller is enabled + /* DMA channels are only used if + * Serial IO DMA controller is enabled + */ Name (DBUF, ResourceTemplate () { - FixedDMA (0x1A, 6, Width32Bit, DMA1) // Tx - FixedDMA (0x1B, 7, Width32Bit, DMA2) // Rx + FixedDMA (0x1A, 6, Width32Bit, DMA1) + FixedDMA (0x1B, 7, Width32Bit, DMA2) }) Method (_CRS, 0, NotSerialized) { - // Update BAR0 address and length if set in NVS + /* Update BAR0 address and length if set in NVS */ If (LNotEqual (\S2B0, Zero)) { CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) @@ -303,12 +231,8 @@ Device (I2C1) Store (SIO_BAR_LEN, B0LN) } - // Check if Serial IO DMA Controller is enabled - If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) { - Return (ConcatenateResTemplate (RBUF, DBUF)) - } Else { - Return (RBUF) - } + /* Check if Serial IO DMA Controller is enabled */ + Return (RBUF) } Method (_STA, 0, NotSerialized) @@ -331,32 +255,35 @@ Device (I2C1) } } -Device (SPI0) +Device (I2C3) { - // Serial IO SPI0 Controller - Method (_HID) - { - If (\ISWP ()) { - // WildcatPoint - Return ("INT3430") - } - - // LynxPoint-LP - Return ("INT33C0") - } + /* Serial IO I2C3 Controller */ + Name (_HID,"INT3445") Name (_UID, 1) Name (_ADR, 0x00150003) + Name (SSCN, Package () { 432, 507, 30 }) + Name (FMCN, Package () { 72, 160, 30 }) - // BAR0 is assigned during PCI enumeration and saved into NVS + /* BAR0 is assigned during PCI enumeration and saved into NVS */ Name (RBUF, ResourceTemplate () { Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7} + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) + { LPSS_I2C3_IRQ } + }) + + /* DMA channels are only used if + * Serial IO DMA controller is enabled + */ + Name (DBUF, ResourceTemplate () + { + FixedDMA (0x1A, 6, Width32Bit, DMA1) + FixedDMA (0x1B, 7, Width32Bit, DMA2) }) Method (_CRS, 0, NotSerialized) { - // Update BAR0 address and length if set in NVS + /* Update BAR0 address and length if set in NVS */ If (LNotEqual (\S3B0, Zero)) { CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) @@ -364,6 +291,7 @@ Device (SPI0) Store (SIO_BAR_LEN, B0LN) } + /* Check if Serial IO DMA Controller is enabled */ Return (RBUF) } @@ -385,56 +313,48 @@ Device (SPI0) { ^^LPD3 (\S3B1, \S3EN) } + } -Device (SPI1) +Device (I2C4) { - // Serial IO SPI1 Controller - Method (_HID) - { - If (\ISWP ()) { - // WildcatPoint - Return ("INT3431") - } - - // LynxPoint-LP - Return ("INT33C1") - } + /* Serial IO I2C4 Controller */ + Name (_HID,"INT3446") Name (_UID, 1) - Name (_ADR, 0x00150004) + Name (_ADR, 0x00190002) + Name (SSCN, Package () { 432, 507, 30 }) + Name (FMCN, Package () { 72, 160, 30 }) - // BAR0 is assigned during PCI enumeration and saved into NVS + /* BAR0 is assigned during PCI enumeration and saved into NVS */ Name (RBUF, ResourceTemplate () { Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7} + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) + { LPSS_I2C4_IRQ } }) - // DMA channels are only used if Serial IO DMA controller is enabled + /* DMA channels are only used if + * Serial IO DMA controller is enabled + */ Name (DBUF, ResourceTemplate () { - FixedDMA (0x10, 0, Width32Bit, DMA1) // Tx - FixedDMA (0x11, 1, Width32Bit, DMA2) // Rx + FixedDMA (0x1A, 6, Width32Bit, DMA1) + FixedDMA (0x1B, 7, Width32Bit, DMA2) }) Method (_CRS, 0, NotSerialized) { - // Update BAR0 address and length if set in NVS - If (LNotEqual (\S4B0, Zero)) { + /* Update BAR0 address and length if set in NVS*/ + If (LNotEqual (\S4B0, Zero)) { CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) Store (\S4B0, B0AD) Store (SIO_BAR_LEN, B0LN) } - // Check if Serial IO DMA Controller is enabled - If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) { - Return (ConcatenateResTemplate (RBUF, DBUF)) - } Else { - Return (RBUF) - } + /* Check if Serial IO DMA Controller is enabled */ + Return (RBUF) } - Method (_STA, 0, NotSerialized) { If (LEqual (\S4EN, 0)) { @@ -455,52 +375,43 @@ Device (SPI1) } } -Device (UAR0) +Device (I2C5) { - // Serial IO UART0 Controller - Method (_HID) - { - If (\ISWP ()) { - // WildcatPoint - Return ("INT3434") - } - - // LynxPoint-LP - Return ("INT33C4") - } + /* Serial IO I2C1 Controller */ + Name (_HID,"INT3447") Name (_UID, 1) - Name (_ADR, 0x00150005) + Name (_ADR, 0x00190002) + Name (SSCN, Package () { 432, 507, 30 }) + Name (FMCN, Package () { 72, 160, 30 }) - // BAR0 is assigned during PCI enumeration and saved into NVS + /* BAR0 is assigned during PCI enumeration and saved into NVS */ Name (RBUF, ResourceTemplate () { - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {13} + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) + { LPSS_I2C5_IRQ } }) - // DMA channels are only used if Serial IO DMA controller is enabled + /* DMA channels are only used if + * Serial IO DMA controller is enabled + */ Name (DBUF, ResourceTemplate () { - FixedDMA (0x16, 2, Width32Bit, DMA1) // Tx - FixedDMA (0x17, 3, Width32Bit, DMA2) // Rx + FixedDMA (0x1A, 6, Width32Bit, DMA1) + FixedDMA (0x1B, 7, Width32Bit, DMA2) }) Method (_CRS, 0, NotSerialized) { - // Update BAR0 address and length if set in NVS - If (LNotEqual (\S5B0, Zero)) { - CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) - CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) - Store (\S5B0, B0AD) - Store (SIO_BAR_LEN, B0LN) - } + /* Update BAR0 address and length if set in NVS */ + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (0xFE02A000, B0AD) + Store (SIO_BAR_LEN, B0LN) - // Check if Serial IO DMA Controller is enabled - If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) { - Return (ConcatenateResTemplate (RBUF, DBUF)) - } Else { - Return (RBUF) - } + + /* Check if Serial IO DMA Controller is enabled */ + Return (RBUF) } Method (_STA, 0, NotSerialized) @@ -523,32 +434,24 @@ Device (UAR0) } } -Device (UAR1) +Device (SPI0) { - // Serial IO UART1 Controller - Method (_HID) - { - If (\ISWP ()) { - // WildcatPoint - Return ("INT3435") - } - - // LynxPoint-LP - Return ("INT33C5") - } + /* Serial IO PI0 Controller */ + Name (_HID,"INT3440") Name (_UID, 1) - Name (_ADR, 0x00150006) + Name (_ADR, 0x001E0002) - // BAR0 is assigned during PCI enumeration and saved into NVS + /* BAR0 is assigned during PCI enumeration and saved into NVS */ Name (RBUF, ResourceTemplate () { Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {13} + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) + { LPSS_SPI0_IRQ } }) Method (_CRS, 0, NotSerialized) { - // Update BAR0 address and length if set in NVS + /* Update BAR0 address and length if set in NVS */ If (LNotEqual (\S6B0, Zero)) { CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) @@ -567,7 +470,6 @@ Device (UAR1) Return (0xF) } } - Method (_PS0, 0, Serialized) { ^^LPD0 (\S6B1, \S6EN) @@ -579,37 +481,129 @@ Device (UAR1) } } -Device (SDIO) +Device (SPI1) { - // Serial IO SDIO Controller - Method (_HID) + /* Serial IO SPI1 Controller */ + Name (_HID,"INT3441") + Name (_UID, 1) + Name (_ADR, 0x001E0003) + + /* BAR0 is assigned during PCI enumeration and saved into NVS */ + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) + { LPSS_SPI1_IRQ } + }) + + /* DMA channels are only used if Serial IO DMA controller is enabled */ + Name (DBUF, ResourceTemplate () + { + FixedDMA (0x10, 0, Width32Bit, DMA1) /* Tx */ + FixedDMA (0x11, 1, Width32Bit, DMA2) /* Rx */ + }) + Method (_CRS, 0, NotSerialized) { - If (\ISWP ()) { - // WildcatPoint - Return ("INT3436") + /* Update BAR0 address and length if set in NVS */ + If (LNotEqual (\S7B0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (\S7B0, B0AD) + Store (SIO_BAR_LEN, B0LN) } - // LynxPoint-LP - Return ("INT33C6") + Return (RBUF) + } + Method (_STA, 0, NotSerialized) + { + If (LEqual (\S7EN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (\S7B1, \S7EN) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (\S7B1, \S7EN) + } +} + +Device (UAR0) +{ + /* Serial IO UART0 Controller */ + Name (_HID,"INT3448") + Name (_UID, 1) + Name (_ADR, 0x001E0000) + + /* BAR0 is assigned during PCI enumeration and saved into NVS */ + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) + { LPSS_UART0_IRQ } + }) + + Method (_CRS, 0, NotSerialized) + { + /* Update BAR0 address and length if set in NVS */ + If (LNotEqual (\S8B0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (\S8B0, B0AD) + Store (SIO_BAR_LEN, B0LN) + } + + Return (RBUF) + } + + Method (_STA, 0, NotSerialized) + { + If (LEqual (\S8EN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (\S8B1, \S8EN) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (\S8B1, \S8EN) } - Name (_CID, "PNP0D40") +} + +Device (UAR1) +{ + /* Serial IO UART1 Controller */ + Name (_HID,"INT3449") Name (_UID, 1) - Name (_ADR, 0x00170000) + Name (_ADR, 0x001E0001) - // BAR0 is assigned during PCI enumeration and saved into NVS + /* BAR0 is assigned during PCI enumeration and saved into NVS */ Name (RBUF, ResourceTemplate () { Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {5} + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) + { LPSS_UART1_IRQ } }) Method (_CRS, 0, NotSerialized) { // Update BAR0 address and length if set in NVS - If (LNotEqual (\S7B0, Zero)) { + If (LNotEqual (\S9B0, Zero)) { CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) - Store (\S7B0, B0AD) + Store (\S9B0, B0AD) Store (SIO_BAR_LEN, B0LN) } @@ -618,10 +612,97 @@ Device (SDIO) Method (_STA, 0, NotSerialized) { - If (LEqual (\S7EN, 0)) { + If (LEqual (\S9EN, 0)) { Return (0x0) } Else { Return (0xF) } } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (\S9B1, \S9EN) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (\S9B1, \S9EN) + } } + +Device (UAR2) +{ + /* Serial IO UART1 Controller */ + Name (_HID,"INT344A") + Name (_UID, 1) + Name (_ADR, 0x00190000) + + /* BAR0 is assigned during PCI enumeration and saved into NVS */ + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) + { LPSS_UART2_IRQ } + }) + + Method (_CRS, 0, NotSerialized) + { + /* Update BAR0 address and length if set in NVS */ + If (LNotEqual (\SAB0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (\SAB0, B0AD) + Store (SIO_BAR_LEN, B0LN) + } + + Return (RBUF) + } + + Method (_STA, 0, NotSerialized) + { + If (LEqual (\SAEN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (\SAB1, \SAEN) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (\SAB1, \SAEN) + } +} + + +Device (PEMC) +{ + Name (_ADR, 0x001E0004) + Device (CARD) + { + Name (_ADR, 0x00000008) + Method (_RMV, 0x0, NotSerialized) + { + Return (0) + } + } +} + +/* SD controller */ +Device (PSDC) +{ + Name (_ADR, 0x001E0006) + Device (CARD) + { + Name (_ADR, 0x00000008) + Method (_RMV, 0x0, NotSerialized) + { + Return (1) + } + } +} + diff --git a/src/soc/intel/skylake/acpi/sleepstates.asl b/src/soc/intel/skylake/acpi/sleepstates.asl index 6fea862..dda7d14 100644 --- a/src/soc/intel/skylake/acpi/sleepstates.asl +++ b/src/soc/intel/skylake/acpi/sleepstates.asl @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ Name (\_S0, Package () { 0x0, 0x0, 0x0, 0x0 }) diff --git a/src/soc/intel/skylake/acpi/smbus.asl b/src/soc/intel/skylake/acpi/smbus.asl index 15bcfde..31a5114 100644 --- a/src/soc/intel/skylake/acpi/smbus.asl +++ b/src/soc/intel/skylake/acpi/smbus.asl @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,14 +16,14 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ // Intel SMBus Controller 0:1f.3 Device (SBUS) { - Name (_ADR, 0x001f0003) + Name (_ADR, 0x001f0004) #ifdef ENABLE_SMBUS_METHODS OperationRegion (SMBP, PCI_Config, 0x00, 0x100) diff --git a/src/soc/intel/skylake/acpi/systemagent.asl b/src/soc/intel/skylake/acpi/systemagent.asl index c2049ea..b8fec94 100644 --- a/src/soc/intel/skylake/acpi/systemagent.asl +++ b/src/soc/intel/skylake/acpi/systemagent.asl @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,11 +16,14 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <soc/iomap.h> +#define BASE_32GB 0x800000000 +#define SIZE_16GB 0x400000000 + Name (_HID, EISAID ("PNP0A08")) // PCIe Name (_CID, EISAID ("PNP0A03")) // PCI @@ -33,12 +37,86 @@ Device (MCHC) OperationRegion (MCHP, PCI_Config, 0x00, 0x100) Field (MCHP, DWordAcc, NoLock, Preserve) { + Offset(0x40), // EPBAR (0:0:0:40) + EPEN, 1, // Enable + , 11, + EPBR, 20, // EPBAR [31:12] + + Offset(0x48), // MCHBAR (0:0:0:48) + MHEN, 1, // Enable + , 14, + MHBR, 17, // MCHBAR [31:15] + + Offset(0x54), // DEVEN (0:0:0:54) + D0EN, 1, // DEV0 Enable + D1F2, 1, // DEV1 FUN2 Enable + D1F1, 1, // DEV1 FUN1 Enable + D1F0, 1, // DEV1 FUN0 Enable + + Offset(0x60), // PCIEXBAR (0:0:0:60) + PXEN, 1, // Enable + PXSZ, 2, // PCI Express Size + , 23, + PXBR, 6, // PCI Express BAR [31:26] + + Offset(0x68), // DMIBAR (0:0:0:68) + DIEN, 1, // Enable + , 11, + DIBR, 20, // DMIBAR [31:12] + Offset (0x70), // ME Base Address - MEBA, 64, + MEBA, 64, + + Offset(0x80), // PAM0 Register (0:0:0:80) + PMLK, 1, // PAM Lock bit. + , 3, + PM0H, 2, // PAM 0, High Nibble + , 2, + + Offset(0x81), // PAM1 Register (0:0:0:81) + PM1L, 2, // PAM1, Low Nibble + , 2, + PM1H, 2, // PAM1, High Nibble + , 2, + + Offset(0x82), // PAM2 Register (0:0:0:82) + PM2L, 2, // PAM2, Low Nibble + , 2, + PM2H, 2, // PAM2, High Nibble + , 2, + + Offset(0x83), // PAM3 Register (0:0:0:83) + PM3L, 2, // PAM3, Low Nibble + , 2, + PM3H, 2, // PAM3, High Nibble + , 2, + + Offset(0x84), // PAM4 Register (0:0:0:84) + PM4L, 2, // PAM4, Low Nibble + , 2, + PM4H, 2, // PAM4, High Nibble + , 2, + + Offset(0x85), // PAM5 Register (0:0:0:85) + PM5L, 2, // PAM5, Low Nibble + , 2, + PM5H, 2, // PAM5, High Nibble + , 2, + + Offset(0x86), // PAM6 Register (0:0:0:86) + PM6L, 2, // PAM6, Low Nibble + , 2, + PM6H, 2, // PAM6, High Nibble + , 2, + Offset (0xa0), // Top of Used Memory - TOM, 64, + TOM, 64, + + Offset (0xa8), // Top of Upper Used Memory + TUUD, 64, + Offset (0xbc), // Top of Low Used Memory - TLUD, 32, + TLUD, 32, } } @@ -48,161 +126,311 @@ Method (_CRS, 0, Serialized) { Name (MCRS, ResourceTemplate() { - // Bus Numbers + /* Bus Numbers */ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, 0x0000, 0x00ff, 0x0000, 0x0100,,, PB00) - // IO Region 0 + /* IO Region 0 */ DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, 0x0000, 0x0cf7, 0x0000, 0x0cf8,,, PI00) - // PCI Config Space + /* PCI Config Space */ Io (Decode16, 0x0cf8, 0x0cf8, 0x0001, 0x0008) - // IO Region 1 + /* IO Region 1 */ DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, 0x0d00, 0xffff, 0x0000, 0xf300,,, PI01) - // VGA memory (0xa0000-0xbffff) + /* VGA memory (0xa0000-0xbffff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000a0000, 0x000bffff, 0x00000000, 0x00020000,,, ASEG) - // OPROM reserved (0xc0000-0xc3fff) + /* OPROM reserved (0xc0000-0xc3fff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000c0000, 0x000c3fff, 0x00000000, 0x00004000,,, OPR0) - // OPROM reserved (0xc4000-0xc7fff) + /* OPROM reserved (0xc4000-0xc7fff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000c4000, 0x000c7fff, 0x00000000, 0x00004000,,, OPR1) - // OPROM reserved (0xc8000-0xcbfff) + /* OPROM reserved (0xc8000-0xcbfff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000c8000, 0x000cbfff, 0x00000000, 0x00004000,,, OPR2) - // OPROM reserved (0xcc000-0xcffff) + /* OPROM reserved (0xcc000-0xcffff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000cc000, 0x000cffff, 0x00000000, 0x00004000,,, OPR3) - // OPROM reserved (0xd0000-0xd3fff) + /* OPROM reserved (0xd0000-0xd3fff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000d0000, 0x000d3fff, 0x00000000, 0x00004000,,, OPR4) - // OPROM reserved (0xd4000-0xd7fff) + /* OPROM reserved (0xd4000-0xd7fff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000d4000, 0x000d7fff, 0x00000000, 0x00004000,,, OPR5) - // OPROM reserved (0xd8000-0xdbfff) + /* OPROM reserved (0xd8000-0xdbfff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000d8000, 0x000dbfff, 0x00000000, 0x00004000,,, OPR6) - // OPROM reserved (0xdc000-0xdffff) + /* OPROM reserved (0xdc000-0xdffff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000dc000, 0x000dffff, 0x00000000, 0x00004000,,, OPR7) - // BIOS Extension (0xe0000-0xe3fff) + /* BIOS Extension (0xe0000-0xe3fff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000e0000, 0x000e3fff, 0x00000000, 0x00004000,,, ESG0) - // BIOS Extension (0xe4000-0xe7fff) + /* BIOS Extension (0xe4000-0xe7fff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000e4000, 0x000e7fff, 0x00000000, 0x00004000,,, ESG1) - // BIOS Extension (0xe8000-0xebfff) + /* BIOS Extension (0xe8000-0xebfff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000e8000, 0x000ebfff, 0x00000000, 0x00004000,,, ESG2) - // BIOS Extension (0xec000-0xeffff) + /* BIOS Extension (0xec000-0xeffff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000ec000, 0x000effff, 0x00000000, 0x00004000,,, ESG3) - // System BIOS (0xf0000-0xfffff) + /* System BIOS (0xf0000-0xfffff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0x000f0000, 0x000fffff, 0x00000000, 0x00010000,,, FSEG) - // PCI Memory Region (Top of memory-CONFIG_MMCONF_BASE_ADDRESS) + /* PCI Memory Region (TOLUD - 0xdfffffff) */ + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + NonCacheable, ReadWrite, + 0x00000000, 0x00000000, 0xdfffffff, 0x00000000, + 0xE0000000,,, PM01) + + /* PCI Memory Region (TOUUD - (TOUUD + ABOVE_4G_MMIO_SIZE)) */ + QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + NonCacheable, ReadWrite, + 0x00000000, 0x10000, 0x1ffff, 0x00000000, + 0x10000,,, PM02) + + /* PCH reserved resource (0xfd000000-0xfe7fffff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, 0x00000000, 0x00000000, 0x00000000, - 0x00000000,,, PM01) + 0x00000000, 0xfd000000, 0xfe7fffff, 0x00000000, + 0x1800000,,, PM03) - // TPM Area (0xfed40000-0xfed44fff) + /* TPM Area (0xfed40000-0xfed44fff) */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0x00000000, 0xfed40000, 0xfed44fff, 0x00000000, 0x00005000,,, TPMR) }) - // Find PCI resource area in MCRS - CreateDwordField(MCRS, PM01._MIN, PMIN) - CreateDwordField(MCRS, PM01._MAX, PMAX) - CreateDwordField(MCRS, PM01._LEN, PLEN) + /* Find PCI resource area in MCRS */ + CreateDwordField (MCRS, PM01._MIN, PMIN) + CreateDwordField (MCRS, PM01._MAX, PMAX) + CreateDwordField (MCRS, PM01._LEN, PLEN) - // Fix up PCI memory region - // Start with Top of Lower Usable DRAM + /* + * Fix up PCI memory region + * Start with Top of Lower Usable DRAM + */ Store (^MCHC.TLUD, Local0) Store (^MCHC.MEBA, Local1) - // Check if ME base is equal + /* Check if ME base is equal */ If (LEqual (Local0, Local1)) { - // Use Top Of Memory instead + /* Use Top Of Memory instead */ Store (^MCHC.TOM, Local0) } Store (Local0, PMIN) - Store (Subtract(CONFIG_MMCONF_BASE_ADDRESS, 1), PMAX) - Add(Subtract(PMAX, PMIN), 1, PLEN) + Add (Subtract (PMAX, PMIN), 1, PLEN) + + /* Patch PM02 range based on Memory Size */ + CreateQwordField (MCRS, PM02._MIN, MMIN) + CreateQwordField (MCRS, PM02._MAX, MMAX) + CreateQwordField (MCRS, PM02._LEN, MLEN) + + Store (^MCHC.TUUD, Local0) + + If (LLessEqual (Local0, BASE_32GB)) + { + Store (BASE_32GB, MMIN) + Store (SIZE_16GB, MLEN) + } + else + { + Store (0, MMIN) + Store (0, MLEN) + } + Subtract (Add (MMIN, MLEN), 1, MMAX) Return (MCRS) } +Name (EP_B, 0) /* to store EP BAR */ +Name (MH_B, 0) /* to store MCH BAR */ +Name (PC_B, 0) /* to store PCIe BAR */ +Name (PC_L, 0) /* to store PCIe BAR Length */ +Name (DM_B, 0) /* to store DMI BAR */ + +/* Get MCH BAR */ +Method (GMHB,0,Serialized) +{ + if (LEqual (MH_B,0)) + { + ShiftLeft (\_SB.PCI0.MCHC.MHBR, 15, MH_B) + } + Return (MH_B) +} + +/* Get EP BAR */ +Method (GEPB,0,Serialized) +{ + if (LEqual (EP_B,0)) + { + ShiftLeft (\_SB.PCI0.MCHC.EPBR, 12, EP_B) + } + Return (EP_B) +} + +/* Get PCIe BAR */ +Method (GPCB,0,Serialized) +{ + if (LEqual (PC_B,0)) + { + ShiftLeft (\_SB.PCI0.MCHC.PXBR, 26, PC_B) + } + Return (PC_B) +} + +/* Get PCIe Length */ +Method (GPCL,0,Serialized) +{ + if (LEqual (PC_L,0)) + { + ShiftRight (0x10000000, \_SB.PCI0.MCHC.PXSZ, PC_L) + } + Return (PC_L) +} + +/* Get DMI BAR */ +Method (GDMB,0,Serialized) +{ + if (LEqual (DM_B,0)) + { + ShiftLeft (\_SB.PCI0.MCHC.DIBR, 12, DM_B) + } + Return (DM_B) +} + /* PCI Device Resource Consumption */ Device (PDRC) { Name (_HID, EISAID("PNP0C02")) Name (_UID, 1) - Name (PDRS, ResourceTemplate() { - Memory32Fixed (ReadWrite, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE) - Memory32Fixed (ReadWrite, MCH_BASE_ADDRESS, MCH_BASE_SIZE) - Memory32Fixed (ReadWrite, DMI_BASE_ADDRESS, DMI_BASE_SIZE) - Memory32Fixed (ReadWrite, EP_BASE_ADDRESS, EP_BASE_SIZE) - Memory32Fixed (ReadWrite, MCFG_BASE_ADDRESS, MCFG_BASE_SIZE) - Memory32Fixed (ReadWrite, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE) - Memory32Fixed (ReadWrite, GDXC_BASE_ADDRESS, GDXC_BASE_SIZE) + Name (BUF0,ResourceTemplate() + { + /* MCH BAR _BAS will be updated in _CRS below according to + * B0:D0:F0:Reg.48h + */ + Memory32Fixed (ReadWrite, 0, 0x08000, MCHB) + + /* DMI BAR _BAS will be updated in _CRS below according to + * B0:D0:F0:Reg.68h + */ + Memory32Fixed (ReadWrite, 0, 0x01000, DMIB) + + /* EP BAR _BAS will be updated in _CRS below according to + * B0:D0:F0:Reg.40h + */ + Memory32Fixed (ReadWrite, 0, 0x01000, EGPB) + + /* PCI Express BAR _BAS and _LEN will be updated in + * _CRS below according to B0:D0:F0:Reg.60h + */ + Memory32Fixed (ReadWrite, 0, 0, PCIX) + + /* MISC ICH TTT base address reserved for the + * TxT module use. + */ + Memory32Fixed (ReadWrite, 0xFED20000, 0x20000) + + /* VTD engine memory range. + * Check if the hard code meets the real configuration. + */ + Memory32Fixed (ReadOnly, 0xFED90000, 0x00004000) + + /* MISC ICH. Check if the hard code meets the + * real configuration. + */ + Memory32Fixed (ReadWrite, 0xFED45000, 0x4B000, TPMM) + + /* FLASH range */ + Memory32Fixed (ReadOnly, 0xFF000000, 0x1000000, FIOH) /* 16MB */ + + /* Local APIC range(0xFEE0_0000 to 0xFEEF_FFFF) */ + Memory32Fixed (ReadOnly, 0xFEE00000, 0x100000, LIOH) + + /* Reserve HPET address decode range */ + Memory32Fixed (ReadWrite, 0, 0, HPET) + + /* Debug Base Address + * Base Address for ACPI debug output memory buffer + */ + Memory32Fixed (ReadWrite, 0, 0, DBAD) }) // Current Resource Settings Method (_CRS, 0, Serialized) { - Return (PDRS) + CreateDwordField (BUF0, ^MCHB._BAS, MBR0) + Store (\_SB.PCI0.GMHB(), MBR0) + + CreateDwordField (BUF0, ^DMIB._BAS, DBR0) + Store (\_SB.PCI0.GDMB(), DBR0) + + CreateDwordField (BUF0, ^EGPB._BAS, EBR0) + Store (\_SB.PCI0.GEPB(), EBR0) + + CreateDwordField (BUF0, ^PCIX._BAS, XBR0) + Store (\_SB.PCI0.GPCB(), XBR0) + + CreateDwordField (BUF0, ^PCIX._LEN, XSZ0) + Store (\_SB.PCI0.GPCL(), XSZ0) + + CreateDwordField (BUF0, ^HPET._BAS, HBAS) + CreateDwordField (BUF0, ^HPET._LEN, HLEN) + Store (0xfed00000, HBAS) + Store (0x400, HLEN) + + Return (BUF0) } } diff --git a/src/soc/intel/skylake/acpi/xhci.asl b/src/soc/intel/skylake/acpi/xhci.asl index c41275c..f0ee414 100644 --- a/src/soc/intel/skylake/acpi/xhci.asl +++ b/src/soc/intel/skylake/acpi/xhci.asl @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,17 +16,17 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -// XHCI Controller 0:14.0 +/* XHCI Controller 0:14.0 */ Device (XHCI) { Name (_ADR, 0x00140000) - Name (PLSD, 5) // Port Link State - RxDetect - Name (PLSP, 7) // Port Link State - Polling + Name (PLSD, 5) /* Port Link State - RxDetect */ + Name (PLSP, 7) /* Port Link State - Polling */ OperationRegion (XPRT, PCI_Config, 0x00, 0x100) Field (XPRT, AnyAcc, NoLock, Preserve) @@ -34,68 +35,74 @@ Device (XHCI) DVID, 16, Offset (0x10), , 16, - XMEM, 16, // MEM_BASE - Offset (0x40), - , 11, - SWAI, 1, - , 20, - Offset (0x44), - , 12, - SAIP, 2, - , 18, + XMEM, 16, /* MEM_BASE */ Offset (0x74), D0D3, 2, , 6, - PMEE, 1, // PME_EN + PMEE, 1, /* PME_EN */ , 6, - PMES, 1, // PME_STS + PMES, 1, /* PME_STS */ + Offset (0xA8), + , 13, + MW13, 1, + MW14, 1, + , 17, Offset (0xb0), , 13, MB13, 1, MB14, 1, + , 17, Offset (0xd0), - PR2R, 32, // USB2PR - PR2M, 32, // USB2PRM - PR3R, 32, // USB3PR - PR3M, 32, // USB3PRM + PR2, 32, /* USB2PR */ + PR2M, 32, /* USB2PRM */ + PR3, 32, /* USB3PR */ + PR3M, 32, /* USB3PRM */ + } + + Method (USRA,0){ + Return(11) } - // Clear status bits + Method (SSPA,0){ + Return (13) + } + + /* Clear status bits */ Method (LPCL, 0, Serialized) { OperationRegion (XREG, SystemMemory, - ShiftLeft (^XMEM, 16), 0x600) + ShiftLeft (^XMEM, 16), 0x600) Field (XREG, DWordAcc, Lock, Preserve) { - Offset (0x510), // PORTSCNUSB3[0] + Offset (0x510), /* PORTSCNUSB3[0]*/ PSC0, 32, - Offset (0x520), // PORTSCNUSB3[1] + Offset (0x520), /* PORTSCNUSB3[1]*/ PSC1, 32, - Offset (0x530), // PORTSCNUSB3[2] + Offset (0x530), /* PORTSCNUSB3[2]*/ PSC2, 32, - Offset (0x540), // PORTSCNUSB3[3] + Offset (0x540), /* PORTSCNUSB3[3]*/ PSC3, 32, } - // Port Enabled/Disabled (Bit 1) + /* Port Enabled/Disabled (Bit 1)*/ Name (PEDB, ShiftLeft (1, 1)) - // Change Status (Bits 23:17) + /* Change Status (Bits 23:17)*/ Name (CHST, ShiftLeft (0x7f, 17)) - // Port 0 + /* Port 0 */ And (PSC0, Not (PEDB), Local0) Or (Local0, CHST, PSC0) - // Port 1 + /* Port 1 */ And (PSC1, Not (PEDB), Local0) Or (Local0, CHST, PSC1) - // Port 2 + /* Port 2 */ And (PSC2, Not (PEDB), Local0) Or (Local0, CHST, PSC2) - // Port 3 + /* Port 3 */ And (PSC3, Not (PEDB), Local0) Or (Local0, CHST, PSC3) } @@ -148,7 +155,7 @@ Device (XHCI) WPR4, 1, // [31] Warm Port Reset } - // Wait for all powered ports to finish polling + /* Wait for all powered ports to finish polling*/ Store (10, Local0) While (LOr (LOr (LAnd (LEqual (PPR1, 1), LEqual (PLS1, PLSP)), LAnd (LEqual (PPR2, 1), LEqual (PLS2, PLSP))), @@ -162,13 +169,13 @@ Device (XHCI) Stall (10) } - // For each USB3 Port: - // If port is disconnected (PLS=5 PP=1 CSC=0) - // 1) Issue warm reset (WPR=1) - // 2) Poll for warm reset complete (WRC=0) - // 3) Write 1 to port status to clear + /* For each USB3 Port:*/ + /* If port is disconnected (PLS=5 PP=1 CSC=0)*/ + /* 1) Issue warm reset (WPR=1)*/ + /* 2) Poll for warm reset complete (WRC=0)*/ + /* 3) Write 1 to port status to clear*/ - // Local# indicate if port is reset + /* Local# indicate if port is reset*/ Store (0, Local1) Store (0, Local2) Store (0, Local3) @@ -176,26 +183,26 @@ Device (XHCI) If (LAnd (LEqual (PLS1, PLSD), LAnd (LEqual (CSC1, 0), LEqual (PPR1, 1)))) { - Store (1, WPR1) // Issue warm reset + Store (1, WPR1) /* Issue warm reset*/ Store (1, Local1) } If (LAnd (LEqual (PLS2, PLSD), LAnd (LEqual (CSC2, 0), LEqual (PPR2, 1)))) { - Store (1, WPR2) // Issue warm reset + Store (1, WPR2) /* Issue warm reset*/ Store (1, Local2) } If (LAnd (LEqual (PLS3, PLSD), LAnd (LEqual (CSC3, 0), LEqual (PPR3, 1)))) { - Store (1, WPR3) // Issue warm reset + Store (1, WPR3) /* Issue warm reset*/ Store (1, Local3) } If (LAnd (LEqual (PLS4, PLSD), LAnd (LEqual (CSC4, 0), LEqual (PPR4, 1)))) { - Store (1, WPR4) // Issue warm reset + Store (1, WPR4) /* Issue warm reset*/ Store (1, Local4) } - // Poll for warm reset complete on all ports that were reset + /* Poll for warm reset complete on all ports that were reset*/ Store (10, Local0) While (LOr (LOr (LAnd (LEqual (Local1, 1), LEqual (WRC1, 0)), LAnd (LEqual (Local2, 1), LEqual (WRC2, 0))), @@ -209,7 +216,7 @@ Device (XHCI) Stall (10) } - // Clear status bits in all ports + /* Clear status bits in all ports */ LPCL () } @@ -220,152 +227,95 @@ Device (XHCI) Method (_PS0, 0, Serialized) { - If (LEqual (^DVID, 0xFFFF)) { - Return () - } - If (LOr (LEqual (^XMEM, 0xFFFF), LEqual (^XMEM, 0x0000))) { - Return () - } - - OperationRegion (XREG, SystemMemory, - Add (ShiftLeft (^XMEM, 16), 0x8000), 0x200) - Field (XREG, DWordAcc, Lock, Preserve) - { - Offset (0x0e0), // AUX Reset Control 1 - , 15, - AX15, 1, - Offset (0x154), // AUX Domain PM Control Register 2 - , 31, - CLK2, 1, - Offset (0x16c), // AUX Clock Control - , 2, - CLK0, 1, - , 11, - CLK1, 1, // USB3 Port Aux/Core Clock Gating Enable - } - - // If device is in D3, set back to D0 - Store (^D0D3, Local0) - if (LEqual (Local0, 3)) { - Store (0, ^D0D3) - } - - if (LNot (\ISWP())) { - // Clear PCI 0xB0[14:13] - Store (0, ^MB13) - Store (0, ^MB14) - - // Clear MMIO 0x816C[14,2] - Store (0, CLK0) - Store (0, CLK1) - - // Set MMIO 0x8154[31] - Store (1, CLK2) - - // Handle per-port reset if needed - LPS0 () - - // Set MMIO 0x80e0[15] - Store (1, AX15) - - // Clear PCI CFG offset 0x40[11] - Store (0, ^SWAI) - - // Clear PCI CFG offset 0x44[13:12] - Store (0, ^SAIP) - } - - Return () } - Method (_PS3, 0, Serialized) { - If (LEqual (^DVID, 0xFFFF)) { - Return () - } - If (LOr (LEqual (^XMEM, 0xFFFF), LEqual (^XMEM, 0x0000))) { - Return () - } - - OperationRegion (XREG, SystemMemory, - Add (ShiftLeft (^XMEM, 16), 0x8000), 0x200) - Field (XREG, DWordAcc, Lock, Preserve) - { - Offset (0x0e0), // AUX Reset Control 1 - , 15, - AX15, 1, - Offset (0x154), // AUX Domain PM Control Register 2 - , 31, - CLK2, 1, - Offset (0x16c), // AUX Clock Control - , 2, - CLK0, 1, - , 11, - CLK1, 1, // USB3 Port Aux/Core Clock Gating Enable - } - - Store (1, ^PMES) // Clear PME Status - Store (1, ^PMEE) // Enable PME - - // If device is in D3, set back to D0 - Store (^D0D3, Local0) - if (LEqual (Local0, 3)) { - Store (0, ^D0D3) - } - - if (LNot (\ISWP())) { - // Set PCI 0xB0[14:13] - Store (1, ^MB13) - Store (1, ^MB14) - - // Set MMIO 0x816C[14,2] - Store (1, CLK0) - Store (1, CLK1) - - // Clear MMIO 0x8154[31] - Store (0, CLK2) - - // Clear MMIO 0x80e0[15] - Store (0, AX15) - - // Set PCI CFG offset 0x40[11] - Store (1, ^SWAI) - - // Set PCI CFG offset 0x44[13:12] - Store (1, ^SAIP) - } - - // Put device in D3 - Store (3, ^D0D3) - - Return () } Name (_PRW, Package(){ 0x6d, 3 }) - // Leave USB ports on for to allow Wake from USB + /* Leave USB ports on for to allow Wake from USB */ - Method(_S3D,0) // Highest D State in S3 State + Method (_S3D,0) /* Highest D State in S3 State*/ { Return (3) } - Method(_S4D,0) // Highest D State in S4 State + Method (_S4D,0) /* Highest D State in S4 State*/ { Return (3) } - - Device (HUB7) + Device (HS01) { - Name (_ADR, 0x00000000) - - // How many are there? - Device (PRT1) { Name (_ADR, 1) } // USB Port 0 - Device (PRT2) { Name (_ADR, 2) } // USB Port 1 - Device (PRT3) { Name (_ADR, 3) } // USB Port 2 - Device (PRT4) { Name (_ADR, 4) } // USB Port 3 - Device (PRT5) { Name (_ADR, 5) } // USB Port 4 - Device (PRT6) { Name (_ADR, 6) } // USB Port 5 + Name(_ADR, 0x01) + } + Device (HS02) + { + Name(_ADR, 0x02) + } + Device (HS03) + { + Name(_ADR, 0x03) + } + Device (HS04) + { + Name(_ADR, 0x04) + } + Device (HS05) + { + Name(_ADR, 0x05) + } + Device (HS06) + { + Name(_ADR, 0x06) + } + Device (HS07) + { + Name(_ADR, 0x07) + } + Device (HS08) + { + Name(_ADR, 0x08) + } + Device (HS09) + { + Name(_ADR, 0x09) + } + Device (HS10) + { + Name(_ADR, 0x10) + } + Device (USR1) + { + Method(_ADR) { Return (Add(USRA(),0)) } + } + Device (USR2) + { + Method(_ADR) { Return (Add(USRA(),1)) } + } + Device (SS01) + { + Method(_ADR) { Return (Add(SSPA(),0)) } + } + Device (SS02) + { + Method(_ADR) { Return (Add(SSPA(),1)) } + } + Device (SS03) + { + Method(_ADR) { Return (Add(SSPA(),2)) } + } + Device (SS04) + { + Method(_ADR) { Return (Add(SSPA(),3)) } + } + Device (SS05) + { + Method(_ADR) { Return (Add(SSPA(),4)) } + } + Device (SS06) + { + Method(_ADR) { Return (Add(SSPA(),5)) } } } diff --git a/src/soc/intel/skylake/adsp.c b/src/soc/intel/skylake/adsp.c deleted file mode 100644 index 1a7cca7..0000000 --- a/src/soc/intel/skylake/adsp.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <cbmem.h> -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <arch/io.h> -#include <delay.h> -#include <soc/adsp.h> -#include <soc/device_nvs.h> -#include <soc/iobp.h> -#include <soc/nvs.h> -#include <soc/pch.h> -#include <soc/ramstage.h> -#include <soc/rcba.h> -#include <soc/intel/broadwell/chip.h> - -static void adsp_init(struct device *dev) -{ - config_t *config = dev->chip_info; - struct resource *bar0, *bar1; - u32 tmp32; - - /* Ensure memory and bus master are enabled */ - tmp32 = pci_read_config32(dev, PCI_COMMAND); - tmp32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config32(dev, PCI_COMMAND, tmp32); - - /* Find BAR0 and BAR1 */ - bar0 = find_resource(dev, PCI_BASE_ADDRESS_0); - if (!bar0) - return; - bar1 = find_resource(dev, PCI_BASE_ADDRESS_1); - if (!bar1) - return; - - /* - * Set LTR value in DSP shim LTR control register to 3ms - * SNOOP_REQ[13]=1b SNOOP_SCALE[12:10]=100b (1ms) SNOOP_VAL[9:0]=3h - */ - tmp32 = pch_is_wpt() ? ADSP_SHIM_BASE_WPT : ADSP_SHIM_BASE_LPT; - write32(res2mmio(bar0, tmp32 + ADSP_SHIM_LTRC, 0), - ADSP_SHIM_LTRC_VALUE); - - /* Program VDRTCTL2 D19:F0:A8[31:0] = 0x00000fff */ - pci_write_config32(dev, ADSP_PCI_VDRTCTL2, ADSP_VDRTCTL2_VALUE); - - /* Program ADSP IOBP VDLDAT1 to 0x040100 */ - pch_iobp_write(ADSP_IOBP_VDLDAT1, ADSP_VDLDAT1_VALUE); - - /* Set D3 Power Gating Enable in D19:F0:A0 based on PCH type */ - tmp32 = pci_read_config32(dev, ADSP_PCI_VDRTCTL0); - if (pch_is_wpt()) { - if (config->adsp_d3_pg_enable) { - tmp32 &= ~ADSP_VDRTCTL0_D3PGD_WPT; - if (config->adsp_sram_pg_enable) - tmp32 &= ~ADSP_VDRTCTL0_D3SRAMPGD_WPT; - else - tmp32 |= ADSP_VDRTCTL0_D3SRAMPGD_WPT; - } else { - tmp32 |= ADSP_VDRTCTL0_D3PGD_WPT; - } - } else { - if (config->adsp_d3_pg_enable) { - tmp32 &= ~ADSP_VDRTCTL0_D3PGD_LPT; - if (config->adsp_sram_pg_enable) - tmp32 &= ~ADSP_VDRTCTL0_D3SRAMPGD_LPT; - else - tmp32 |= ADSP_VDRTCTL0_D3SRAMPGD_LPT; - } else { - tmp32 |= ADSP_VDRTCTL0_D3PGD_LPT; - } - } - pci_write_config32(dev, ADSP_PCI_VDRTCTL0, tmp32); - - /* Set PSF Snoop to SA, RCBA+0x3350[10]=1b */ - RCBA32_OR(0x3350, (1 << 10)); - - /* Set DSP IOBP PMCTL 0x1e0=0x3f */ - pch_iobp_write(ADSP_IOBP_PMCTL, ADSP_PMCTL_VALUE); - - if (config->sio_acpi_mode) { - /* Configure for ACPI mode */ - global_nvs_t *gnvs; - - printk(BIOS_INFO, "ADSP: Enable ACPI Mode IRQ3\n"); - - /* Find ACPI NVS to update BARs */ - gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS); - if (!gnvs) { - printk(BIOS_ERR, "Unable to locate Global NVS\n"); - return; - } - - /* Save BAR0 and BAR1 to ACPI NVS */ - gnvs->dev.bar0[SIO_NVS_ADSP] = (u32)bar0->base; - gnvs->dev.bar1[SIO_NVS_ADSP] = (u32)bar1->base; - gnvs->dev.enable[SIO_NVS_ADSP] = 1; - - /* Set PCI Config Disable Bit */ - pch_iobp_update(ADSP_IOBP_PCICFGCTL, ~0, ADSP_PCICFGCTL_PCICD); - - /* Set interrupt de-assert/assert opcode override to IRQ3 */ - pch_iobp_write(ADSP_IOBP_VDLDAT2, ADSP_IOBP_ACPI_IRQ3); - - /* Enable IRQ3 in RCBA */ - RCBA32_OR(ACPIIRQEN, ADSP_ACPI_IRQEN); - - /* Set ACPI Interrupt Enable Bit */ - pch_iobp_update(ADSP_IOBP_PCICFGCTL, ~ADSP_PCICFGCTL_SPCBAD, - ADSP_PCICFGCTL_ACPIIE); - - /* Put ADSP in D3hot */ - tmp32 = read32(res2mmio(bar1, PCH_PCS, 0)); - tmp32 |= PCH_PCS_PS_D3HOT; - write32(res2mmio(bar1, PCH_PCS, 0), tmp32); - } else { - printk(BIOS_INFO, "ADSP: Enable PCI Mode IRQ23\n"); - - /* Configure for PCI mode */ - pci_write_config32(dev, PCI_INTERRUPT_LINE, ADSP_PCI_IRQ); - - /* Clear ACPI Interrupt Enable Bit */ - pch_iobp_update(ADSP_IOBP_PCICFGCTL, - ~(ADSP_PCICFGCTL_SPCBAD | ADSP_PCICFGCTL_ACPIIE), 0); - } -} - -static struct device_operations adsp_ops = { - .read_resources = &pci_dev_read_resources, - .set_resources = &pci_dev_set_resources, - .enable_resources = &pci_dev_enable_resources, - .init = &adsp_init, - .ops_pci = &broadwell_pci_ops, -}; - -static const unsigned short pci_device_ids[] = { - 0x9c36, /* LynxPoint */ - 0x9cb6, /* WildcatPoint */ - 0 -}; - -static const struct pci_driver pch_adsp __pci_driver = { - .ops = &adsp_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; - diff --git a/src/soc/intel/skylake/bootblock/Makefile.inc b/src/soc/intel/skylake/bootblock/Makefile.inc index 2ca5a45..a31f588 100644 --- a/src/soc/intel/skylake/bootblock/Makefile.inc +++ b/src/soc/intel/skylake/bootblock/Makefile.inc @@ -1 +1 @@ -chipset_bootblock_inc += $(src)/soc/intel/broadwell/bootblock/timestamp.inc +chipset_bootblock_inc += $(src)/soc/intel/skylake/bootblock/timestamp.inc diff --git a/src/soc/intel/skylake/bootblock/cpu.c b/src/soc/intel/skylake/bootblock/cpu.c index 3a47d13..d4506e5 100644 --- a/src/soc/intel/skylake/bootblock/cpu.c +++ b/src/soc/intel/skylake/bootblock/cpu.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <stdint.h> @@ -22,11 +23,18 @@ #include <cpu/x86/cache.h> #include <cpu/x86/msr.h> #include <cpu/x86/mtrr.h> +#include <device/pci_def.h> #include <arch/io.h> -#include <halt.h> #include <cpu/intel/microcode/microcode.c> -#include <soc/rcba.h> +#include <reset.h> #include <soc/msr.h> +#include <soc/pci_devs.h> +#include <soc/spi.h> + +/* Soft Reset Data Register Bit 12 = MAX Boot Frequency */ +#define SPI_STRAP_MAX_FREQ (1<<12) +/* Soft Reset Data Register Bit 6-11 = Flex Ratio */ +#define FLEX_RATIO_BIT 6 static void set_var_mtrr( unsigned reg, unsigned base, unsigned size, unsigned type) @@ -47,7 +55,6 @@ static void enable_rom_caching(void) msr_t msr; disable_cache(); - /* Why only top 4MiB ? */ set_var_mtrr(1, CACHE_ROM_BASE, CACHE_ROM_SIZE, MTRR_TYPE_WRPROT); enable_cache(); @@ -68,10 +75,59 @@ static void bootblock_mdelay(int ms) } while ((current.lo - start.lo) < target); } +static void set_pch_cpu_strap(u8 flex_ratio) +{ + device_t dev = PCH_DEV_SPI; + uint8_t *spibar = (void *)TEMP_SPI_BAR; + u32 ssl, ssms, soft_reset_data; + u8 pcireg; + + /* Assign Resources to SPI Controller */ + /* Clear BIT 1-2 SPI Command Register */ + pcireg = pci_read_config8(dev, PCI_COMMAND); + pcireg &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + pci_write_config8(dev, PCI_COMMAND, pcireg); + + /* Program Temporary BAR for SPI */ + pci_write_config32(dev, PCH_SPI_BASE_ADDRESS, TEMP_SPI_BAR); + + /* Enable Bus Master and MMIO Space */ + pcireg = pci_read_config8(dev, PCI_COMMAND); + pcireg |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config8(dev, PCI_COMMAND, pcireg); + + /* Set Strap Lock Disable*/ + ssl = read32(spibar + SPIBAR_RESET_LOCK); + ssl |= SPIBAR_RESET_LOCK_DISABLE; + write32(spibar + SPIBAR_RESET_LOCK, ssl); + + /* Soft Reset Data Register Bit 12 = MAX Boot Frequency + * Bit 6-11 = Flex Ratio + * Soft Reset Data register located at SPIBAR0 offset 0xF8[0:15]. + */ + soft_reset_data = SPI_STRAP_MAX_FREQ; + soft_reset_data |= (flex_ratio << FLEX_RATIO_BIT); + write32(spibar + SPIBAR_RESET_DATA, soft_reset_data); + + /* Set Strap Mux Select set to '1' */ + ssms = read32(spibar + SPIBAR_RESET_CTRL); + ssms |= SPIBAR_RESET_CTRL_SSMC; + write32(spibar + SPIBAR_RESET_CTRL, ssms); + + /* Set Strap Lock Enable*/ + ssl = read32(spibar + SPIBAR_RESET_LOCK); + ssl |= SPIBAR_RESET_LOCK_ENABLE; + write32(spibar + SPIBAR_RESET_LOCK, ssl); + + /* Disable SPI Controller MMIO space */ + pcireg = pci_read_config8(dev, PCI_COMMAND); + pcireg &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + pci_write_config8(dev, PCI_COMMAND, pcireg); +} + static void set_flex_ratio_to_tdp_nominal(void) { msr_t flex_ratio, msr; - u32 soft_reset; u8 nominal_ratio; /* Check for Flex Ratio support */ @@ -98,23 +154,14 @@ static void set_flex_ratio_to_tdp_nominal(void) flex_ratio.lo |= FLEX_RATIO_LOCK; wrmsr(MSR_FLEX_RATIO, flex_ratio); - /* Set flex ratio in soft reset data register bits 11:6. - * RCBA region is enabled in southbridge bootblock */ - soft_reset = RCBA32(SOFT_RESET_DATA); - soft_reset &= ~(0x3f << 6); - soft_reset |= (nominal_ratio & 0x3f) << 6; - RCBA32(SOFT_RESET_DATA) = soft_reset; - - /* Set soft reset control to use register value */ - RCBA32_OR(SOFT_RESET_CTRL, 1); + /* Set PCH Soft Reset Data Register with new Flex Ratio */ + set_pch_cpu_strap(nominal_ratio); /* Delay before reset to avoid potential TPM lockout */ bootblock_mdelay(30); - /* Issue warm reset, will be "CPU only" due to soft reset data */ - outb(0x0, 0xcf9); - outb(0x6, 0xcf9); - halt(); + /* Issue soft reset, will be "CPU only" due to soft reset data */ + soft_reset(); } static void check_for_clean_reset(void) @@ -122,14 +169,13 @@ static void check_for_clean_reset(void) msr_t msr; msr = rdmsr(MTRRdefType_MSR); - /* Use the MTRR default type MSR as a proxy for detecting INIT#. + /* + * Use the MTRR default type MSR as a proxy for detecting INIT#. * Reset the system if any known bits are set in that MSR. That is - * an indication of the CPU not being properly reset. */ - if (msr.lo & (MTRRdefTypeEn | MTRRdefTypeFixEn)) { - outb(0x0, 0xcf9); - outb(0x6, 0xcf9); - halt(); - } + * an indication of the CPU not being properly reset. + */ + if (msr.lo & (MTRRdefTypeEn | MTRRdefTypeFixEn)) + soft_reset(); } static void bootblock_cpu_init(void) diff --git a/src/soc/intel/skylake/bootblock/pch.c b/src/soc/intel/skylake/bootblock/pch.c index 2fa7220..9f256e3 100644 --- a/src/soc/intel/skylake/bootblock/pch.c +++ b/src/soc/intel/skylake/bootblock/pch.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,14 +15,12 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ - #include <arch/io.h> #include <soc/iomap.h> #include <soc/lpc.h> #include <soc/pci_devs.h> -#include <soc/rcba.h> #include <soc/spi.h> /* @@ -29,51 +28,13 @@ */ static void enable_spi_prefetch(void) { - u8 reg8 = pci_read_config8(PCH_DEV_LPC, 0xdc); + u8 reg8 = pci_read_config8(PCH_DEV_SPI, 0xdc); reg8 &= ~(3 << 2); reg8 |= (2 << 2); /* Prefetching and Caching Enabled */ - pci_write_config8(PCH_DEV_LPC, 0xdc, reg8); -} - - -static void map_rcba(void) -{ - pci_write_config32(PCH_DEV_LPC, RCBA, RCBA_BASE_ADDRESS | 1); -} - -static void enable_port80_on_lpc(void) -{ - /* Enable port 80 POST on LPC. The chipset does this by default, - * but it doesn't appear to hurt anything. */ - u32 gcs = RCBA32(GCS); - gcs = gcs & ~0x4; - RCBA32(GCS) = gcs; -} - -static void set_spi_speed(void) -{ - u32 fdod; - u8 ssfc; - - /* Observe SPI Descriptor Component Section 0 */ - SPIBAR32(SPIBAR_FDOC) = 0x1000; - - /* Extract the Write/Erase SPI Frequency from descriptor */ - fdod = SPIBAR32(SPIBAR_FDOD); - fdod >>= 24; - fdod &= 7; - - /* Set Software Sequence frequency to match */ - ssfc = SPIBAR8(SPIBAR_SSFC + 2); - ssfc &= ~7; - ssfc |= fdod; - SPIBAR8(SPIBAR_SSFC + 2) = ssfc; + pci_write_config8(PCH_DEV_SPI, 0xdc, reg8); } static void bootblock_southbridge_init(void) { - map_rcba(); enable_spi_prefetch(); - enable_port80_on_lpc(); - set_spi_speed(); } diff --git a/src/soc/intel/skylake/bootblock/systemagent.c b/src/soc/intel/skylake/bootblock/systemagent.c index 15e7fc8..6f029f0 100644 --- a/src/soc/intel/skylake/bootblock/systemagent.c +++ b/src/soc/intel/skylake/bootblock/systemagent.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/io.h> @@ -32,7 +33,7 @@ static void bootblock_northbridge_init(void) * MCFG. This code also assumes that bootblock_northbridge_init() is * the first thing called in the non-asm boot block code. The final * assumption is that no assembly code is using the - * CONFIG_MMCONF_SUPPORT_DEFAULT option to do PCI config accesses. + * CONFIG_MMCONF_SUPPORT_DEFAULT option to do PCI config acceses. * * The PCIEXBAR is assumed to live in the memory mapped IO space under * 4GiB. diff --git a/src/soc/intel/skylake/bootblock/timestamp.inc b/src/soc/intel/skylake/bootblock/timestamp.inc index f565775..e504132 100644 --- a/src/soc/intel/skylake/bootblock/timestamp.inc +++ b/src/soc/intel/skylake/bootblock/timestamp.inc @@ -1,6 +1,8 @@ -/* Store the initial timestamp for booting in mmx registers. This works +/* + * Store the initial timestamp for booting in mmx registers. This works * because the bootblock isn't being compiled with MMX support so mm0 and - * mm1 will be preserved into romstage. */ + * mm1 will be preserved into romstage. + */ .code32 .global stash_timestamp diff --git a/src/soc/intel/skylake/chip.c b/src/soc/intel/skylake/chip.c index 0026152..1cf6276 100644 --- a/src/soc/intel/skylake/chip.c +++ b/src/soc/intel/skylake/chip.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,15 +15,16 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ +#include <chip.h> #include <console/console.h> #include <device/device.h> #include <device/pci.h> +#include <fsp_util.h> #include <soc/pci_devs.h> #include <soc/ramstage.h> -#include <soc/intel/broadwell/chip.h> static void pci_domain_set_resources(device_t dev) { @@ -36,14 +38,25 @@ static struct device_operations pci_domain_ops = { .ops_pci_bus = &pci_bus_default_ops, }; +static void cpu_bus_noop(device_t dev) { } + +static void chip_final(device_t dev) +{ + /* Notify FSP done device setup */ + printk(BIOS_DEBUG, + "Calling FspNotify(EnumInitPhaseAfterPciEnumeration)\n"); + fsp_notify(EnumInitPhaseAfterPciEnumeration); +} + static struct device_operations cpu_bus_ops = { - .read_resources = DEVICE_NOOP, - .set_resources = DEVICE_NOOP, - .enable_resources = DEVICE_NOOP, - .init = &broadwell_init_cpus, + .read_resources = &cpu_bus_noop, + .set_resources = &cpu_bus_noop, + .enable_resources = &cpu_bus_noop, + .init = &soc_init_cpus, + .final = &chip_final, }; -static void broadwell_enable(device_t dev) +static void soc_enable(device_t dev) { /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_DOMAIN) { @@ -52,19 +65,48 @@ static void broadwell_enable(device_t dev) dev->ops = &cpu_bus_ops; } else if (dev->path.type == DEVICE_PATH_PCI) { /* Handle PCH device enable */ - if (PCI_SLOT(dev->path.pci.devfn) > SA_DEV_SLOT_MINIHD && + if (PCI_SLOT(dev->path.pci.devfn) > SA_DEV_SLOT_IGD && (dev->ops == NULL || dev->ops->enable == NULL)) { - broadwell_pch_enable_dev(dev); + pch_enable_dev(dev); } } } -struct chip_operations soc_intel_broadwell_ops = { - CHIP_NAME("Intel Broadwell") - .enable_dev = &broadwell_enable, - .init = &broadwell_init_pre_device, +struct chip_operations soc_intel_skylake_ops = { + CHIP_NAME("Intel Skylake") + .enable_dev = &soc_enable, + .init = &soc_init_pre_device, }; +/* UPD parameters to be initialized before SiliconInit */ +void soc_silicon_init_params(SILICON_INIT_UPD *params) +{ + const struct device *dev; + const struct soc_intel_skylake_config *config; + + /* Set the parameters for SiliconInit */ + dev = dev_find_slot(0, PCI_DEVFN(PCH_DEV_SLOT_LPC, 0)); + if (!dev || !dev->chip_info) + return; + config = dev->chip_info; + + params->Device4Enable = config->Device4Enable; +} + +void soc_display_silicon_init_params(const SILICON_INIT_UPD *original, + SILICON_INIT_UPD *params) +{ + /* Display the parameters for SiliconInit */ + printk(BIOS_SPEW, "UPD values for SiliconInit:\n"); + + soc_display_upd_value("GpioTablePtr", 4, + (uint32_t)original->GpioTablePtr, + (uint32_t)params->GpioTablePtr); + soc_display_upd_value("Device4Enable", 1, + original->Device4Enable, + params->Device4Enable); +} + static void pci_set_subsystem(device_t dev, unsigned vendor, unsigned device) { if (!vendor || !device) @@ -75,6 +117,6 @@ static void pci_set_subsystem(device_t dev, unsigned vendor, unsigned device) (device << 16) | vendor); } -struct pci_operations broadwell_pci_ops = { +struct pci_operations soc_pci_ops = { .set_subsystem = &pci_set_subsystem }; diff --git a/src/soc/intel/skylake/chip.h b/src/soc/intel/skylake/chip.h index 77c517d..15e211e 100644 --- a/src/soc/intel/skylake/chip.h +++ b/src/soc/intel/skylake/chip.h @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2008 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,13 +16,17 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _SOC_INTEL_BROADWELL_CHIP_H_ -#define _SOC_INTEL_BROADWELL_CHIP_H_ +#include <stdint.h> +#include <soc/pci_devs.h> +#include <soc/serialio.h> -struct soc_intel_broadwell_config { +#ifndef _SOC_CHIP_H_ +#define _SOC_CHIP_H_ + +struct soc_intel_skylake_config { /* * Interrupt Routing configuration * If bit7 is 1, the interrupt is disabled. @@ -42,29 +47,9 @@ struct soc_intel_broadwell_config { uint32_t gpe0_en_4; /* GPIO SMI configuration */ + uint32_t ec_smi_gpio; uint32_t alt_gp_smi_en; - /* IDE configuration */ - uint8_t sata_port_map; - uint32_t sata_port0_gen3_tx; - uint32_t sata_port1_gen3_tx; - uint32_t sata_port0_gen3_dtle; - uint32_t sata_port1_gen3_dtle; - - /* - * SATA DEVSLP Mux - * 0 = port 0 DEVSLP on DEVSLP0/GPIO33 - * 1 = port 3 DEVSLP on DEVSLP0/GPIO33 - */ - uint8_t sata_devslp_mux; - - /* - * DEVSLP Disable - * 0: DEVSLP is enabled - * 1: DEVSLP is disabled - */ - uint8_t sata_devslp_disable; - /* Generic IO decode ranges */ uint32_t gen1_dec; uint32_t gen2_dec; @@ -77,13 +62,6 @@ struct soc_intel_broadwell_config { /* Force root port ASPM configuration with port bitmap */ uint8_t pcie_port_force_aspm; - /* Put SerialIO devices into ACPI mode instead of a PCI device */ - uint8_t sio_acpi_mode; - - /* I2C voltage select: 0=3.3V 1=1.8V */ - uint8_t sio_i2c0_voltage; - uint8_t sio_i2c1_voltage; - /* Enable ADSP power gating features */ uint8_t adsp_d3_pg_enable; uint8_t adsp_sram_pg_enable; @@ -130,37 +108,125 @@ struct soc_intel_broadwell_config { /* Enable S0iX support */ int s0ix_enable; + /* Deep SX enable for both AC and DC */ + int deep_s3_enable; + int deep_s5_enable; + + /* TCC activation offset */ + int tcc_offset; + /* - * Minimum voltage for C6/C7 state: - * 0x67 = 1.6V (full swing) - * ... - * 0x79 = 1.7V - * ... - * 0x83 = 1.8V (no swing) + * The following fields come from fsp_vpd.h. + * These are configuration values that are passed to FSP during + * MemoryInit. */ - int vr_cpu_min_vid; + u64 PlatformMemorySize; + u8 SmramMask; + u8 MrcFastBoot; + u32 IedSize; + u32 TsegSize; + u16 MmioSize; + + /* Probeless Trace function */ + u8 ProbelessTrace; + + /* Lan */ + u8 EnableLan; + + /* SATA related */ + u8 EnableSata; + u8 SataMode; + u8 SataSalpSupport; + u8 SataPortsEnable[8]; + u8 SataPortsDevSlp[8]; + + /* Audio related */ + u8 EnableAzalia; + u8 DspEnable; + u8 IoBufferOwnership; + + /* Trace Hub function */ + u8 EnableTraceHub; + + /* Pcie Root Ports */ + u8 PcieRpEnable[20]; + u8 PcieRpClkReqSupport[20]; + u8 PcieRpClkReqNumber[20]; + + /* USB related */ + u8 PortUsb20Enable[16]; + u8 PortUsb30Enable[10]; + u8 XdciEnable; + u8 SsicPortEnable; + + /* SMBus */ + u8 SmbusEnable; /* - * Set slow VR ramp rate on C-state exit: - * 0 = Fast VR ramp rate / 2 - * 1 = Fast VR ramp rate / 4 - * 2 = Fast VR ramp rate / 8 - * 3 = Fast VR ramp rate / 16 + * SerialIO device mode selection: + * + * Device index: + * PchSerialIoIndexI2C0 + * PchSerialIoIndexI2C1 + * PchSerialIoIndexI2C2 + * PchSerialIoIndexI2C3 + * PchSerialIoIndexI2C4 + * PchSerialIoIndexI2C5 + * PchSerialIoIndexI2C6 + * PchSerialIoIndexSpi0 + * PchSerialIoIndexSpi1 + * PchSerialIoIndexUart0 + * PchSerialIoIndexUart1 + * PchSerialIoIndexUart2 + * + * Mode select: + * PchSerialIoDisabled + * PchSerialIoAcpi + * PchSerialIoPci + * PchSerialIoAcpiHidden + * PchSerialIoLegacyUart */ - int vr_slow_ramp_rate_set; + u8 SerialIoDevMode[PchSerialIoIndexMax]; - /* Enable slow VR ramp rate */ - int vr_slow_ramp_rate_enable; + /* Camera */ + u8 Cio2Enable; - /* Deep SX enable */ - int deep_sx_enable_ac; - int deep_sx_enable_dc; + /* eMMC and SD */ + u8 ScsEmmcEnabled; + u8 ScsEmmcHs400Enabled; + u8 ScsSdCardEnabled; - /* TCC activation offset */ - int tcc_offset; + /* Integrated Sensor */ + u8 IshEnable; + + /* SPI related */ + u8 ShowSpiController; + + u8 PttSwitch; + u8 HeciTimeouts; + u8 HsioMessaging; + u8 Heci3Enabled; + + /* Gfx related */ + u8 IgdDvmt50PreAlloc; + u8 PrimaryDisplay; + u8 InternalGfx; + u8 ApertureSize; + u8 SkipExtGfxScan; + u8 ScanExtGfxForLegacyOpRom; + + /* + * The following fields come from fsp_vpd.h + * These are configuration values that are passed to FSP during + * SiliconInit. + */ + u32 LogoPtr; + u32 LogoSize; + u32 GraphicsConfigPtr; + u8 Device4Enable; }; -typedef struct soc_intel_broadwell_config config_t; +typedef struct soc_intel_skylake_config config_t; extern struct chip_operations soc_ops; diff --git a/src/soc/intel/skylake/cpu.c b/src/soc/intel/skylake/cpu.c index 984ff76..440c929 100644 --- a/src/soc/intel/skylake/cpu.c +++ b/src/soc/intel/skylake/cpu.c @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <console/console.h> @@ -23,6 +24,7 @@ #include <device/pci.h> #include <string.h> #include <arch/acpi.h> +#include <chip.h> #include <cpu/cpu.h> #include <cpu/x86/mtrr.h> #include <cpu/x86/msr.h> @@ -40,10 +42,8 @@ #include <soc/msr.h> #include <soc/pci_devs.h> #include <soc/ramstage.h> -#include <soc/rcba.h> #include <soc/smm.h> #include <soc/systemagent.h> -#include <soc/intel/broadwell/chip.h> /* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */ static const u8 power_limit_time_sec_to_msr[] = { @@ -103,9 +103,11 @@ static const u8 power_limit_time_msr_to_sec[] = { [0x11] = 128, }; -/* The core 100MHz BLCK is disabled in deeper c-states. One needs to calibrate +/* + * The core 100MHz BLCK is disabled in deeper c-states. One needs to calibrate * the 100MHz BCLCK against the 24MHz BLCK to restore the clocks properly - * when a core is woken up. */ + * when a core is woken up. + */ static int pcode_ready(void) { int wait_count; @@ -159,57 +161,18 @@ static void calibrate_24mhz_bclk(void) MCHBAR32(BIOS_MAILBOX_DATA)); } -static u32 pcode_mailbox_read(u32 command) -{ - if (pcode_ready() < 0) { - printk(BIOS_ERR, "PCODE: mailbox timeout on wait ready.\n"); - return 0; - } - - /* Send command and start transaction */ - MCHBAR32(BIOS_MAILBOX_INTERFACE) = command | MAILBOX_RUN_BUSY; - - if (pcode_ready() < 0) { - printk(BIOS_ERR, "PCODE: mailbox timeout on completion.\n"); - return 0; - } - - /* Read mailbox */ - return MCHBAR32(BIOS_MAILBOX_DATA); -} - -static int pcode_mailbox_write(u32 command, u32 data) -{ - if (pcode_ready() < 0) { - printk(BIOS_ERR, "PCODE: mailbox timeout on wait ready.\n"); - return -1; - } - - MCHBAR32(BIOS_MAILBOX_DATA) = data; - - /* Send command and start transaction */ - MCHBAR32(BIOS_MAILBOX_INTERFACE) = command | MAILBOX_RUN_BUSY; - - if (pcode_ready() < 0) { - printk(BIOS_ERR, "PCODE: mailbox timeout on completion.\n"); - return -1; - } - - return 0; -} - static void initialize_vr_config(void) { - device_t dev = SA_DEV_ROOT; - config_t *conf = dev->chip_info; msr_t msr; printk(BIOS_DEBUG, "Initializing VR config.\n"); /* Configure VR_CURRENT_CONFIG. */ msr = rdmsr(MSR_VR_CURRENT_CONFIG); - /* Preserve bits 63 and 62. Bit 62 is PSI4 enable, but it is only valid - * on ULT systems. */ + /* + * Preserve bits 63 and 62. Bit 62 is PSI4 enable, but it is only valid + * on ULT systems. + */ msr.hi &= 0xc0000000; msr.hi |= (0x01 << (52 - 32)); /* PSI3 threshold - 1A. */ msr.hi |= (0x05 << (42 - 32)); /* PSI2 threshold - 5A. */ @@ -225,88 +188,31 @@ static void initialize_vr_config(void) msr.hi |= (0x200 << (40 - 32)); /* 1.0 */ /* Set IOUT_OFFSET to 0. */ msr.hi &= ~0xff; + /* Set exit ramp rate to fast. */ + msr.hi |= (1 << (50 - 32)); /* Set entry ramp rate to slow. */ msr.hi &= ~(1 << (51 - 32)); /* Enable decay mode on C-state entry. */ msr.hi |= (1 << (52 - 32)); - /* Set the slow ramp rate */ + /* Set the slow ramp rate to be fast ramp rate / 4 */ msr.hi &= ~(0x3 << (53 - 32)); - /* Configure the C-state exit ramp rate. */ - if (conf->vr_slow_ramp_rate_enable) { - /* Configured slow ramp rate. */ - msr.hi |= ((conf->vr_slow_ramp_rate_set & 0x3) << (53 - 32)); - /* Set exit ramp rate to slow. */ - msr.hi &= ~(1 << (50 - 32)); - } else { - /* Fast ramp rate / 4. */ - msr.hi |= (0x01 << (53 - 32)); - /* Set exit ramp rate to fast. */ - msr.hi |= (1 << (50 - 32)); - } + msr.hi |= (0x01 << (53 - 32)); /* Set MIN_VID (31:24) to allow CPU to have full control. */ msr.lo &= ~0xff000000; - msr.lo |= (conf->vr_cpu_min_vid & 0xff) << 24; wrmsr(MSR_VR_MISC_CONFIG, msr); /* Configure VR_MISC_CONFIG2 MSR. */ msr = rdmsr(MSR_VR_MISC_CONFIG2); msr.lo &= ~0xffff; - /* Allow CPU to control minimum voltage completely (15:8) and - * set the fast ramp voltage in 10mV steps. */ - if (cpu_family_model() == BROADWELL_FAMILY_ULT) + /* + * Allow CPU to control minimum voltage completely (15:8) and + * set the fast ramp voltage in 10mV steps. + */ + if (cpu_family_model() == SKYLAKE_FAMILY_ULT) msr.lo |= 0x006a; /* 1.56V */ else msr.lo |= 0x006f; /* 1.60V */ wrmsr(MSR_VR_MISC_CONFIG2, msr); - - /* Set C9/C10 VCC Min */ - pcode_mailbox_write(MAILBOX_BIOS_CMD_WRITE_C9C10_VOLTAGE, 0x1f1f); -} - -static void configure_pch_power_sharing(void) -{ - u32 pch_power, pch_power_ext, pmsync, pmsync2; - int i; - - /* Read PCH Power levels from PCODE */ - pch_power = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER); - pch_power_ext = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER_EXT); - - printk(BIOS_INFO, "PCH Power: PCODE Levels 0x%08x 0x%08x\n", - pch_power, pch_power_ext); - - pmsync = RCBA32(PMSYNC_CONFIG); - pmsync2 = RCBA32(PMSYNC_CONFIG2); - - /* Program PMSYNC_TPR_CONFIG PCH power limit values - * pmsync[0:4] = mailbox[0:5] - * pmsync[8:12] = mailbox[6:11] - * pmsync[16:20] = mailbox[12:17] - */ - for (i = 0; i < 3; i++) { - u32 level = pch_power & 0x3f; - pch_power >>= 6; - pmsync &= ~(0x1f << (i * 8)); - pmsync |= (level & 0x1f) << (i * 8); - } - RCBA32(PMSYNC_CONFIG) = pmsync; - - /* Program PMSYNC_TPR_CONFIG2 Extended PCH power limit values - * pmsync2[0:4] = mailbox[23:18] - * pmsync2[8:12] = mailbox_ext[6:11] - * pmsync2[16:20] = mailbox_ext[12:17] - * pmsync2[24:28] = mailbox_ext[18:22] - */ - pmsync2 &= ~0x1f; - pmsync2 |= pch_power & 0x1f; - - for (i = 1; i < 4; i++) { - u32 level = pch_power_ext & 0x3f; - pch_power_ext >>= 6; - pmsync2 &= ~(0x1f << (i * 8)); - pmsync2 |= (level & 0x1f) << (i * 8); - } - RCBA32(PMSYNC_CONFIG2) = pmsync2; } int cpu_config_tdp_levels(void) @@ -371,8 +277,8 @@ void set_power_limits(u8 power_limit_1_time) limit.hi = 0; limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK; limit.hi |= PKG_POWER_LIMIT_EN; - /* Power limit 2 time is only programmable on server SKU */ + /* Power limit 2 time is only programmable on server SKU */ wrmsr(MSR_PKG_POWER_LIMIT, limit); /* Set power limit values in MCHBAR as well */ @@ -393,73 +299,13 @@ void set_power_limits(u8 power_limit_1_time) } } -static void configure_c_states(void) -{ - msr_t msr; - - msr = rdmsr(MSR_PMG_CST_CONFIG_CONTROL); - msr.lo |= (1 << 31); // Timed MWAIT Enable - msr.lo |= (1 << 30); // Package c-state Undemotion Enable - msr.lo |= (1 << 29); // Package c-state Demotion Enable - msr.lo |= (1 << 28); // C1 Auto Undemotion Enable - msr.lo |= (1 << 27); // C3 Auto Undemotion Enable - msr.lo |= (1 << 26); // C1 Auto Demotion Enable - msr.lo |= (1 << 25); // C3 Auto Demotion Enable - msr.lo &= ~(1 << 10); // Disable IO MWAIT redirection - /* The deepest package c-state defaults to factory-configured value. */ - wrmsr(MSR_PMG_CST_CONFIG_CONTROL, msr); - - msr = rdmsr(MSR_MISC_PWR_MGMT); - msr.lo &= ~(1 << 0); // Enable P-state HW_ALL coordination - wrmsr(MSR_MISC_PWR_MGMT, msr); - - msr = rdmsr(MSR_POWER_CTL); - msr.lo |= (1 << 18); // Enable Energy Perf Bias MSR 0x1b0 - msr.lo |= (1 << 1); // C1E Enable - msr.lo |= (1 << 0); // Bi-directional PROCHOT# - wrmsr(MSR_POWER_CTL, msr); - - /* C-state Interrupt Response Latency Control 0 - package C3 latency */ - msr.hi = 0; - msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_0_LIMIT; - wrmsr(MSR_C_STATE_LATENCY_CONTROL_0, msr); - - /* C-state Interrupt Response Latency Control 1 */ - msr.hi = 0; - msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_1_LIMIT; - wrmsr(MSR_C_STATE_LATENCY_CONTROL_1, msr); - - /* C-state Interrupt Response Latency Control 2 - package C6/C7 short */ - msr.hi = 0; - msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_2_LIMIT; - wrmsr(MSR_C_STATE_LATENCY_CONTROL_2, msr); - - /* C-state Interrupt Response Latency Control 3 - package C8 */ - msr.hi = 0; - msr.lo = IRTL_VALID | IRTL_1024_NS | - C_STATE_LATENCY_CONTROL_3_LIMIT; - wrmsr(MSR_C_STATE_LATENCY_CONTROL_3, msr); - - /* C-state Interrupt Response Latency Control 4 - package C9 */ - msr.hi = 0; - msr.lo = IRTL_VALID | IRTL_1024_NS | - C_STATE_LATENCY_CONTROL_4_LIMIT; - wrmsr(MSR_C_STATE_LATENCY_CONTROL_4, msr); - - /* C-state Interrupt Response Latency Control 5 - package C10 */ - msr.hi = 0; - msr.lo = IRTL_VALID | IRTL_1024_NS | - C_STATE_LATENCY_CONTROL_5_LIMIT; - wrmsr(MSR_C_STATE_LATENCY_CONTROL_5, msr); -} - static void configure_thermal_target(void) { device_t dev = SA_DEV_ROOT; config_t *conf = dev->chip_info; msr_t msr; - /* Set TCC activation offset if supported */ + /* Set TCC activaiton offset if supported */ msr = rdmsr(MSR_PLATFORM_INFO); if ((msr.lo & (1 << 30)) && conf->tcc_offset) { msr = rdmsr(MSR_TEMPERATURE_TARGET); @@ -474,9 +320,9 @@ static void configure_misc(void) msr_t msr; msr = rdmsr(IA32_MISC_ENABLE); - msr.lo |= (1 << 0); /* Fast String enable */ - msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */ - msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */ + msr.lo |= (1 << 0); /* Fast String enable */ + msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */ + msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */ wrmsr(IA32_MISC_ENABLE, msr); /* Disable Thermal interrupts */ @@ -567,37 +413,24 @@ static void configure_mca(void) msr = rdmsr(mcg_cap_msr); num_banks = msr.lo & 0xff; msr.lo = msr.hi = 0; - /* TODO(adurbin): This should only be done on a cold boot. Also, some + /* + * TODO(adurbin): This should only be done on a cold boot. Also, some * of these banks are core vs package scope. For now every CPU clears - * every bank. */ + * every bank. + */ for (i = 0; i < num_banks; i++) wrmsr(IA32_MC0_STATUS + (i * 4), msr); } -#if CONFIG_USBDEBUG -static unsigned ehci_debug_addr; -#endif - static void bsp_init_before_ap_bringup(struct bus *cpu_bus) { -#if CONFIG_USBDEBUG - if(!ehci_debug_addr) - ehci_debug_addr = get_ehci_debug(); - set_ehci_debug(0); -#endif - /* Setup MTRRs based on physical address size. */ x86_setup_fixed_mtrrs(); x86_setup_var_mtrrs(cpuid_eax(0x80000008) & 0xff, 2); x86_mtrr_check(); -#if CONFIG_USBDEBUG - set_ehci_debug(ehci_debug_addr); -#endif - initialize_vr_config(); calibrate_24mhz_bclk(); - configure_pch_power_sharing(); } /* All CPUs including BSP will run the following function. */ @@ -610,9 +443,6 @@ static void cpu_core_init(device_t cpu) enable_lapic_tpr(); setup_lapic(); - /* Configure C States */ - configure_c_states(); - /* Configure Enhanced SpeedStep and Thermal Sensors */ configure_misc(); @@ -649,31 +479,36 @@ static void relocate_and_load_microcode(void *unused) static void enable_smis(void *unused) { - /* Now that all APs have been relocated as well as the BSP let SMIs - * start flowing. */ + /* + * Now that all APs have been relocated as well as the BSP let SMIs + * start flowing. + */ southbridge_smm_enable_smi(); /* Lock down the SMRAM space. */ +#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER) smm_lock(); +#endif } static struct mp_flight_record mp_steps[] = { MP_FR_NOBLOCK_APS(relocate_and_load_microcode, NULL, - relocate_and_load_microcode, NULL), + relocate_and_load_microcode, NULL), +#if IS_ENABLED(CONFIG_SMP) MP_FR_BLOCK_APS(mp_initialize_cpu, NULL, mp_initialize_cpu, NULL), /* Wait for APs to finish initialization before proceeding. */ +#endif MP_FR_BLOCK_APS(NULL, NULL, enable_smis, NULL), }; static struct device_operations cpu_dev_ops = { .init = cpu_core_init, + .acpi_fill_ssdt_generator = generate_cpu_entries, }; static struct cpu_device_id cpu_table[] = { - { X86_VENDOR_INTEL, CPUID_HASWELL_ULT }, - { X86_VENDOR_INTEL, CPUID_BROADWELL_C0 }, - { X86_VENDOR_INTEL, CPUID_BROADWELL_D0 }, - { X86_VENDOR_INTEL, CPUID_BROADWELL_E0 }, + { X86_VENDOR_INTEL, CPUID_SKYLAKE_C0 }, + { X86_VENDOR_INTEL, CPUID_SKYLAKE_D0 }, { 0, 0 }, }; @@ -682,7 +517,7 @@ static const struct cpu_driver driver __cpu_driver = { .id_table = cpu_table, }; -void broadwell_init_cpus(device_t dev) +void soc_init_cpus(device_t dev) { struct bus *cpu_bus = dev->link_list; int num_threads; @@ -699,15 +534,21 @@ void broadwell_init_cpus(device_t dev) ht_disabled = num_threads == num_cores; - /* Perform any necessary BSP initialization before APs are brought up. - * This call also allows the BSP to prepare for any secondary effects - * from calling cpu_initialize() such as smm_init(). */ + /* + * Perform any necesarry BSP initialization before APs are brought up. + * This call alos allows the BSP to prepare for any secondary effects + * from calling cpu_initialize() such as smm_init(). + */ bsp_init_before_ap_bringup(cpu_bus); microcode_patch = intel_microcode_find(); /* Save default SMM area before relocation occurs. */ +#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER) smm_save_area = backup_default_smm_area(); +#else + smm_save_area = NULL; +#endif mp_params.num_cpus = num_threads; mp_params.parallel_microcode_load = 1; @@ -719,17 +560,20 @@ void broadwell_init_cpus(device_t dev) mp_params.num_records = ARRAY_SIZE(mp_steps); mp_params.microcode_pointer = microcode_patch; - /* Load relocation and permanent handlers. Then initiate relocation. */ + /* Load relocation and permeanent handlers. Then initiate relocation. */ if (smm_initialize()) - printk(BIOS_CRIT, "SMM initialization failed...\n"); + printk(BIOS_CRIT, "SMM Initialiazation failed...\n"); - if (mp_init(cpu_bus, &mp_params)) { +#if IS_ENABLED(CONFIG_SMP) + if (mp_init(cpu_bus, &mp_params)) printk(BIOS_ERR, "MP initialization failure.\n"); - } +#endif /* Set Max Ratio */ set_max_ratio(); /* Restore the default SMM region. */ +#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER) restore_default_smm_area(smm_save_area); +#endif } diff --git a/src/soc/intel/skylake/cpu_info.c b/src/soc/intel/skylake/cpu_info.c index 72667ac..f3fd0bd 100644 --- a/src/soc/intel/skylake/cpu_info.c +++ b/src/soc/intel/skylake/cpu_info.c @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <console/console.h> @@ -23,6 +24,7 @@ #include <cpu/x86/msr.h> #include <soc/cpu.h> #include <soc/msr.h> +#include <soc/ramstage.h> #include <soc/systemagent.h> u32 cpu_family_model(void) @@ -42,7 +44,7 @@ int cpu_is_ult(void) if (ult < 0) { u32 fm = cpu_family_model(); - if (fm == BROADWELL_FAMILY_ULT || fm == HASWELL_FAMILY_ULT) + if (fm == SKYLAKE_FAMILY_ULT) ult = 1; else ult = 0; diff --git a/src/soc/intel/skylake/ehci.c b/src/soc/intel/skylake/ehci.c deleted file mode 100644 index 3073a54..0000000 --- a/src/soc/intel/skylake/ehci.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <delay.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <soc/ehci.h> -#include <soc/pch.h> - -static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - u8 access_cntl; - - access_cntl = pci_read_config8(dev, 0x80); - - /* Enable writes to protected registers. */ - pci_write_config8(dev, 0x80, access_cntl | 1); - - if (!vendor || !device) { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - pci_read_config32(dev, PCI_VENDOR_ID)); - } else { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - } - - /* Restore protection. */ - pci_write_config8(dev, 0x80, access_cntl); -} - -static void usb_ehci_set_resources(struct device *dev) -{ -#if CONFIG_USBDEBUG - struct resource *res; - u32 base; - u32 usb_debug; - - usb_debug = get_ehci_debug(); - set_ehci_debug(0); -#endif - pci_dev_set_resources(dev); - -#if CONFIG_USBDEBUG - res = find_resource(dev, 0x10); - set_ehci_debug(usb_debug); - if (!res) return; - base = res->base; - set_ehci_base(base); - report_resource_stored(dev, res, ""); -#endif -} - -static void ehci_enable(struct device *dev) -{ - if (CONFIG_USBDEBUG) - dev->enabled = 1; - else - pch_disable_devfn(dev); -} - -static struct pci_operations ehci_ops_pci = { - .set_subsystem = &usb_ehci_set_subsystem, -}; - -static struct device_operations usb_ehci_ops = { - .read_resources = &pci_dev_read_resources, - .set_resources = &usb_ehci_set_resources, - .enable_resources = &pci_dev_enable_resources, - .ops_pci = &ehci_ops_pci, - .enable = &ehci_enable, -}; - -static const unsigned short pci_device_ids[] = { - 0x9c26, /* LynxPoint-LP */ - 0x9ca6, /* WildcatPoint */ - 0 -}; - -static const struct pci_driver pch_usb_ehci __pci_driver = { - .ops = &usb_ehci_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; diff --git a/src/soc/intel/skylake/elog.c b/src/soc/intel/skylake/elog.c index 8cbc3e7..3ae0890 100644 --- a/src/soc/intel/skylake/elog.c +++ b/src/soc/intel/skylake/elog.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <bootstate.h> @@ -22,8 +23,8 @@ #include <console/console.h> #include <stdint.h> #include <elog.h> -#include <soc/lpc.h> #include <soc/pm.h> +#include <soc/pmc.h> static void pch_log_gpio_gpe(u32 gpe0_sts, u32 gpe0_en, int start) { @@ -75,26 +76,17 @@ static void pch_log_wake_source(struct chipset_power_state *ps) static void pch_log_power_and_resets(struct chipset_power_state *ps) { - /* Thermal Trip Status */ - if (ps->gen_pmcon2 & THERMTRIP_STS) - elog_add_event(ELOG_TYPE_THERM_TRIP); + /* TODO: Thermal Trip Status. There is a thermal device and + * other status registers. */ /* PWR_FLR Power Failure */ - if (ps->gen_pmcon2 & PWROK_FLR) + if (ps->gen_pmcon_b & PWR_FLR) elog_add_event(ELOG_TYPE_POWER_FAIL); /* SUS Well Power Failure */ - if (ps->gen_pmcon3 & SUS_PWR_FLR) + if (ps->gen_pmcon_b & SUS_PWR_FLR) elog_add_event(ELOG_TYPE_SUS_POWER_FAIL); - /* SYS_PWROK Failure */ - if (ps->gen_pmcon2 & SYSPWR_FLR) - elog_add_event(ELOG_TYPE_SYS_PWROK_FAIL); - - /* PWROK Failure */ - if (ps->gen_pmcon2 & PWROK_FLR) - elog_add_event(ELOG_TYPE_PWROK_FAIL); - /* TCO Timeout */ if (ps->prev_sleep_state != 3 && ps->tco2_sts & TCO2_STS_SECOND_TO) @@ -105,15 +97,11 @@ static void pch_log_power_and_resets(struct chipset_power_state *ps) elog_add_event(ELOG_TYPE_POWER_BUTTON_OVERRIDE); /* RTC reset */ - if (ps->gen_pmcon3 & RTC_BATTERY_DEAD) + if (ps->gen_pmcon_b & RTC_BATTERY_DEAD) elog_add_event(ELOG_TYPE_RTC_RESET); - /* System Reset Status (reset button pushed) */ - if (ps->gen_pmcon2 & SYSTEM_RESET_STS) - elog_add_event(ELOG_TYPE_RESET_BUTTON); - - /* General Reset Status */ - if (ps->gen_pmcon3 & GEN_RST_STS) + /* Host Reset Status */ + if (ps->gen_pmcon_b & HOST_RST_STS) elog_add_event(ELOG_TYPE_SYSTEM_RESET); /* ACPI Wake Event */ @@ -126,8 +114,8 @@ static void pch_log_state(void *unused) struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE); if (ps == NULL) { - printk(BIOS_ERR, "Not logging power state information. " - "Power state not found in cbmem.\n"); + printk(BIOS_ERR, + "Not logging power state information. Power state not found in cbmem.\n"); return; } diff --git a/src/soc/intel/skylake/finalize.c b/src/soc/intel/skylake/finalize.c index bf5cdcd..bec8676 100644 --- a/src/soc/intel/skylake/finalize.c +++ b/src/soc/intel/skylake/finalize.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/io.h> @@ -26,101 +27,66 @@ #include <spi-generic.h> #include <stdlib.h> #include <soc/pci_devs.h> -#include <soc/lpc.h> -#include <soc/me.h> -#include <soc/rcba.h> +#include <soc/pcr.h> +#include <soc/pm.h> +#include <soc/pmc.h> #include <soc/spi.h> #include <soc/systemagent.h> +#include <device/pci.h> -const struct reg_script system_agent_finalize_script[] = { - REG_PCI_OR16(0x50, 1 << 0), /* GGC */ - REG_PCI_OR32(0x5c, 1 << 0), /* DPR */ - REG_PCI_OR32(0x78, 1 << 10), /* ME */ - REG_PCI_OR32(0x90, 1 << 0), /* REMAPBASE */ - REG_PCI_OR32(0x98, 1 << 0), /* REMAPLIMIT */ - REG_PCI_OR32(0xa0, 1 << 0), /* TOM */ - REG_PCI_OR32(0xa8, 1 << 0), /* TOUUD */ - REG_PCI_OR32(0xb0, 1 << 0), /* BDSM */ - REG_PCI_OR32(0xb4, 1 << 0), /* BGSM */ - REG_PCI_OR32(0xb8, 1 << 0), /* TSEGMB */ - REG_PCI_OR32(0xbc, 1 << 0), /* TOLUD */ - REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x5500, 1 << 0), /* PAVP */ - REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x5f00, 1 << 31), /* SA PM */ - REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x6020, 1 << 0), /* UMA GFX */ - REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x63fc, 1 << 0), /* VTDTRK */ - REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x6800, 1 << 31), - REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x7000, 1 << 31), - REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x77fc, 1 << 0), - REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x50fc, 0x8f), - REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x7ffc, 1 << 0), - REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x5880, 1 << 5), - REG_MMIO_WRITE8(MCH_BASE_ADDRESS + 0x50fc, 0x8f), /* MC */ - - REG_SCRIPT_END -}; +static void pch_finalize_script(void) +{ + device_t dev; + uint32_t reg32, hsfs; + void *spibar = get_spi_bar(); + u8 reg8; + u16 tcobase; + u16 tcocnt; + uint8_t *pmcbase; + u32 pmsyncreg; -const struct reg_script pch_finalize_script[] = { /* Set SPI opcode menu */ - REG_MMIO_WRITE16(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + SPIBAR_PREOP, - SPI_OPPREFIX), - REG_MMIO_WRITE16(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + SPIBAR_OPTYPE, - SPI_OPTYPE), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + - SPIBAR_OPMENU_LOWER, SPI_OPMENU_LOWER), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + - SPIBAR_OPMENU_UPPER, SPI_OPMENU_UPPER), - + write16(spibar + SPIBAR_PREOP, SPI_OPPREFIX); + write16(spibar + SPIBAR_OPTYPE, SPI_OPTYPE); + write32(spibar + SPIBAR_OPMENU_LOWER, SPI_OPMENU_LOWER); + write32(spibar + SPIBAR_OPMENU_UPPER, SPI_OPMENU_UPPER); /* Lock SPIBAR */ - REG_MMIO_OR32(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + SPIBAR_HSFS, - SPIBAR_HSFS_FLOCKDN), - - /* TC Lockdown */ - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x0050, (1 << 31)), + hsfs = read32(spibar + SPIBAR_HSFS); + hsfs |= SPIBAR_HSFS_FLOCKDN; + write32(spibar + SPIBAR_HSFS, hsfs); - /* BIOS Interface Lockdown */ - REG_MMIO_OR32(RCBA_BASE_ADDRESS + GCS, (1 << 0)), - - /* Function Disable SUS Well Lockdown */ - REG_MMIO_OR8(RCBA_BASE_ADDRESS + FDSW, (1 << 7)), + /*TCO Lock down*/ + tcobase = pmc_tco_regs(); + tcocnt = inw(tcobase + TCO1_CNT); + tcocnt |= TCO_LOCK; + outw(tcocnt, tcobase + TCO1_CNT); /* Global SMI Lock */ - REG_PCI_OR16(GEN_PMCON_1, SMI_LOCK), + dev = PCH_DEV_PMC; + reg8 = pci_read_config8(dev, GEN_PMCON_A); + reg8 |= SMI_LOCK; + pci_write_config8(dev, GEN_PMCON_A, reg8); - /* GEN_PMCON Lock */ - REG_PCI_OR8(GEN_PMCON_LOCK, SLP_STR_POL_LOCK | ACPI_BASE_LOCK), + /* Lock down ABASE and sleep stretching policy */ + reg32 = pci_read_config32(dev, GEN_PMCON_B); + reg32 |= (SLP_STR_POL_LOCK | ACPI_BASE_LOCK); + pci_write_config32(dev, GEN_PMCON_B, reg32); /* PMSYNC */ - REG_MMIO_OR32(RCBA_BASE_ADDRESS + PMSYNC_CONFIG, (1 << 31)), - - - REG_SCRIPT_END -}; + pmcbase = pmc_mmio_regs(); + pmsyncreg = read32(pmcbase + PMSYNC_TPR_CFG); + pmsyncreg |= PMSYNC_LOCK; + write32(pmcbase + PMSYNC_TPR_CFG, pmsyncreg); +} -static void broadwell_finalize(void *unused) +static void soc_finalize(void *unused) { printk(BIOS_DEBUG, "Finalizing chipset.\n"); - - reg_script_run_on_dev(SA_DEV_ROOT, system_agent_finalize_script); - reg_script_run_on_dev(PCH_DEV_LPC, pch_finalize_script); - - /* Lock */ - RCBA32_OR(0x3a6c, 0x00000001); - - /* Read+Write the following registers */ - MCHBAR32(0x6030) = MCHBAR32(0x6030); - MCHBAR32(0x6034) = MCHBAR32(0x6034); - MCHBAR32(0x6008) = MCHBAR32(0x6008); - RCBA32(0x21a4) = RCBA32(0x21a4); - - /* Re-init SPI after lockdown */ - spi_init(); - - printk(BIOS_DEBUG, "Finalizing SMM.\n"); - outb(APM_CNT_FINALIZE, APM_CNT); + pch_finalize_script(); /* Indicate finalize step with post code */ post_code(POST_OS_BOOT); } -BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, broadwell_finalize, NULL); -BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, broadwell_finalize, NULL); +BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, soc_finalize, NULL); +BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, soc_finalize, NULL); diff --git a/src/soc/intel/skylake/flash_controller.c b/src/soc/intel/skylake/flash_controller.c new file mode 100644 index 0000000..d8528b1 --- /dev/null +++ b/src/soc/intel/skylake/flash_controller.c @@ -0,0 +1,615 @@ +/* + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +/* This file is derived from the flashrom project. */ +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <bootstate.h> +#include <delay.h> +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <spi_flash.h> +#include <spi-generic.h> +#include <soc/pci_devs.h> +#include <soc/spi.h> + +#define HSFC_FCYCLE_OFF 1 /* 1-2: FLASH Cycle */ +#define HSFC_FCYCLE (0x3 << HSFC_FCYCLE_OFF) +#define HSFC_FCYCLE_WR (0x2 << HSFC_FCYCLE_OFF) +#define HSFC_FDBC_OFF 8 /* 8-13: Flash Data Byte Count */ +#define HSFC_FDBC (0x3f << HSFC_FDBC_OFF) + +#if ENV_SMM +#define pci_read_config_byte(dev, reg, targ)\ + (*(targ) = pci_read_config8(dev, reg)) +#define pci_read_config_word(dev, reg, targ)\ + (*(targ) = pci_read_config16(dev, reg)) +#define pci_read_config_dword(dev, reg, targ)\ + (*(targ) = pci_read_config32(dev, reg)) +#define pci_write_config_byte(dev, reg, val)\ + pci_write_config8(dev, reg, val) +#define pci_write_config_word(dev, reg, val)\ + pci_write_config16(dev, reg, val) +#define pci_write_config_dword(dev, reg, val)\ + pci_write_config32(dev, reg, val) +#else /* !ENV_SMM */ +#include <device/device.h> +#include <device/pci.h> +#define pci_read_config_byte(dev, reg, targ)\ + (*(targ) = pci_read_config8(dev, reg)) +#define pci_read_config_word(dev, reg, targ)\ + (*(targ) = pci_read_config16(dev, reg)) +#define pci_read_config_dword(dev, reg, targ)\ + (*(targ) = pci_read_config32(dev, reg)) +#define pci_write_config_byte(dev, reg, val)\ + pci_write_config8(dev, reg, val) +#define pci_write_config_word(dev, reg, val)\ + pci_write_config16(dev, reg, val) +#define pci_write_config_dword(dev, reg, val)\ + pci_write_config32(dev, reg, val) +#endif /* ENV_SMM */ + +#define B_PCH_SPI_BAR0_MASK 0x0FFF + +typedef struct spi_slave pch_spi_slave; +static struct spi_flash *spi_flash_hwseq_probe(struct spi_slave *spi); +static int pch_hwseq_write(struct spi_flash *flash, + u32 addr, size_t len, const void *buf); +static int pch_hwseq_read(struct spi_flash *flash, + u32 addr, size_t len, void *buf); + +typedef struct pch_spi_regs { + uint32_t bfpr; + uint16_t hsfs; + uint16_t hsfc; + uint32_t faddr; + uint32_t _reserved0; + uint32_t fdata[16]; + uint32_t frap; + uint32_t freg[6]; + uint32_t _reserved1[6]; + uint32_t pr[5]; + uint32_t _reserved2[2]; + uint8_t ssfs; + uint8_t ssfc[3]; + uint16_t preop; + uint16_t optype; + uint8_t opmenu[8]; + uint32_t bbar; + uint32_t fdoc; + uint32_t fdod; + uint8_t _reserved4[8]; + uint32_t afc; + uint32_t lvscc; + uint32_t uvscc; + uint8_t _reserved5[4]; + uint32_t fpb; + uint8_t _reserved6[28]; + uint32_t srdl; + uint32_t srdc; + uint32_t srd; +} __attribute__((packed)) pch_spi_regs; + +typedef struct pch_spi_controller { + int locked; + uint32_t flmap0; + uint32_t hsfs; + pch_spi_regs *pch_spi; + uint8_t *opmenu; + int menubytes; + uint16_t *preop; + uint16_t *optype; + uint32_t *addr; + uint8_t *data; + unsigned databytes; + uint8_t *status; + uint16_t *control; + uint32_t *bbar; +} pch_spi_controller; + +static pch_spi_controller cntlr; + +enum { + HSFS_FDONE = 0x0001, + HSFS_FCERR = 0x0002, + HSFS_AEL = 0x0004, + HSFS_BERASE_MASK = 0x0018, + HSFS_BERASE_SHIFT = 3, + HSFS_SCIP = 0x0020, + HSFS_FDOPSS = 0x2000, + HSFS_FDV = 0x4000, + HSFS_FLOCKDN = 0x8000 +}; + +enum { + HSFC_FGO = 0x0001, + HSFC_FCYCLE_MASK = 0x0006, + HSFC_FCYCLE_SHIFT = 1, + HSFC_FDBC_MASK = 0x3f00, + HSFC_FDBC_SHIFT = 8, + HSFC_FSMIE = 0x8000 +}; + +#if IS_ENABLED(CONFIG_DEBUG_SPI_FLASH) + +static u8 readb_(const void *addr) +{ + u8 v = read8(addr); + printk(BIOS_DEBUG, "read %2.2x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static u16 readw_(const void *addr) +{ + u16 v = read16(addr); + printk(BIOS_DEBUG, "read %4.4x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static u32 readl_(const void *addr) +{ + u32 v = read32(addr); + printk(BIOS_DEBUG, "read %8.8x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static void writeb_(u8 b, void *addr) +{ + write8(addr, b); + printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +static void writew_(u16 b, void *addr) +{ + write16(addr, b); + printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +static void writel_(u32 b, void *addr) +{ + write32(addr, b); + printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */ + +#define readb_(a) read8(a) +#define readw_(a) read16(a) +#define readl_(a) read32(a) +#define writeb_(val, addr) write8(addr, val) +#define writew_(val, addr) write16(addr, val) +#define writel_(val, addr) write32(addr, val) + +#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */ + +static void pch_set_bbar(uint32_t minaddr) +{ + uint32_t pchspi_bbar; + + minaddr &= SPIBAR_MEMBAR_MASK; + pchspi_bbar = readl_(cntlr.bbar) & ~SPIBAR_MEMBAR_MASK; + pchspi_bbar |= minaddr; + writel_(pchspi_bbar, cntlr.bbar); +} + +unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len) +{ + return min(cntlr.databytes, buf_len); +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs) +{ + pch_spi_slave *slave = malloc(sizeof(*slave)); + + if (!slave) { + printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n"); + return NULL; + } + + memset(slave, 0, sizeof(*slave)); + + slave->bus = bus; + slave->cs = cs; + slave->force_programmer_specific = 1; + slave->programmer_specific_probe = spi_flash_hwseq_probe; + + return slave; +} + +static u32 spi_get_flash_size(void) +{ + uint32_t flcomp; + u32 size; + + writel_(SPIBAR_FDOC_COMPONENT, &cntlr.pch_spi->fdoc); + flcomp = readl_(&cntlr.pch_spi->fdod); + printk(BIOS_DEBUG, "flcomp = %x\n", flcomp); + + switch (flcomp & FLCOMP_C0DEN_MASK) { + case FLCOMP_C0DEN_8MB: + size = 0x100000; + break; + case FLCOMP_C0DEN_16MB: + size = 0x1000000; + break; + case FLCOMP_C0DEN_32MB: + size = 0x10000000; + break; + default: + size = 0x1000000; + } + + printk(BIOS_DEBUG, "flash size 0x%x bytes\n", size); + + return size; +} + +int spi_xfer(struct spi_slave *slave, const void *dout, + unsigned int bytesout, void *din, unsigned int bytesin) +{ + /* TODO: Define xfer for hardware sequencing. */ + return -1; +} + +void spi_init(void) +{ + uint8_t bios_cntl; + device_t dev = PCH_DEV_SPI; + pch_spi_regs *pch_spi; + uint16_t hsfs; + + /* Root Complex Register Block */ + pch_spi = (pch_spi_regs *)(get_spi_bar()); + cntlr.pch_spi = pch_spi; + hsfs = readw_(&pch_spi->hsfs); + cntlr.hsfs = hsfs; + cntlr.opmenu = pch_spi->opmenu; + cntlr.menubytes = sizeof(pch_spi->opmenu); + cntlr.optype = &pch_spi->optype; + cntlr.addr = &pch_spi->faddr; + cntlr.data = (uint8_t *)pch_spi->fdata; + cntlr.databytes = sizeof(pch_spi->fdata); + cntlr.status = &pch_spi->ssfs; + cntlr.control = (uint16_t *)pch_spi->ssfc; + cntlr.bbar = &pch_spi->bbar; + cntlr.preop = &pch_spi->preop; + + if (cntlr.hsfs & HSFS_FDV) { + /* Select Flash Descriptor Section Index to 1 */ + writel_(SPIBAR_FDOC_FDSI_1, &pch_spi->fdoc); + cntlr.flmap0 = readl_(&pch_spi->fdod); + } + + pch_set_bbar(0); + + /* Disable the BIOS write protect so write commands are allowed. */ + pci_read_config_byte(dev, SPIBAR_BIOS_CNTL, &bios_cntl); + bios_cntl &= ~SPIBAR_BC_EISS; + bios_cntl |= SPIBAR_BC_WPD; + pci_write_config_byte(dev, SPIBAR_BIOS_CNTL, bios_cntl); +} + +#if ENV_RAMSTAGE + +static void spi_init_cb(void *unused) +{ + spi_init(); +} + +BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, spi_init_cb, NULL); + +#endif /* ENV_RAMSTAGE */ + +int spi_claim_bus(struct spi_slave *slave) +{ + /* Handled by PCH automatically. */ + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + /* Handled by PCH automatically. */ +} + +static void pch_hwseq_set_addr(uint32_t addr) +{ + uint32_t addr_old = readl_(&cntlr.pch_spi->faddr) & ~SPIBAR_FADDR_MASK; + writel_((addr & SPIBAR_FADDR_MASK) | addr_old, &cntlr.pch_spi->faddr); +} + +/* + * Polls for Cycle Done Status, Flash Cycle Error or timeout in 8 us intervals. + * Resets all error flags in HSFS. + * Returns 0 if the cycle completes successfully without errors within + * timeout us, 1 on errors. + */ +static int pch_hwseq_wait_for_cycle_complete(unsigned int timeout, + unsigned int len) +{ + uint16_t hsfs; + uint32_t addr; + + timeout /= 8; /* scale timeout duration to counter */ + while ((((hsfs = readw_(&cntlr.pch_spi->hsfs)) & + (HSFS_FDONE | HSFS_FCERR)) == 0) && --timeout) { + udelay(8); + } + writew_(readw_(&cntlr.pch_spi->hsfs), &cntlr.pch_spi->hsfs); + + if (!timeout) { + uint16_t hsfc; + addr = readl_(&cntlr.pch_spi->faddr) & SPIBAR_FADDR_MASK; + hsfc = readw_(&cntlr.pch_spi->hsfc); + printk(BIOS_ERR, "Transaction timeout between offset 0x%08x \ + and 0x%08x (= 0x%08x + %d) HSFC=%x HSFS=%x!\n", + addr, addr + len - 1, addr, len - 1, + hsfc, hsfs); + return 1; + } + + if (hsfs & HSFS_FCERR) { + uint16_t hsfc; + addr = readl_(&cntlr.pch_spi->faddr) & SPIBAR_FADDR_MASK; + hsfc = readw_(&cntlr.pch_spi->hsfc); + printk(BIOS_ERR, "Transaction error between offset 0x%08x and \ + 0x%08x (= 0x%08x + %d) HSFC=%x HSFS=%x!\n", + addr, addr + len - 1, addr, len - 1, + hsfc, hsfs); + return 1; + } + return 0; +} + + +static int pch_hwseq_erase(struct spi_flash *flash, u32 offset, size_t len) +{ + u32 start, end, erase_size; + int ret; + uint16_t hsfc; + uint16_t timeout = 1000 * 60; + + erase_size = flash->sector_size; + if (offset % erase_size || len % erase_size) { + printk(BIOS_ERR, "SF: Erase offset/length not multiple of erase size\n"); + return -1; + } + + flash->spi->rw = SPI_WRITE_FLAG; + ret = spi_claim_bus(flash->spi); + if (ret) { + printk(BIOS_ERR, "SF: Unable to claim SPI bus\n"); + return ret; + } + + start = offset; + end = start + len; + + while (offset < end) { + /* + * Make sure FDONE, FCERR, AEL are + * cleared by writing 1 to them. + */ + writew_(readw_(&cntlr.pch_spi->hsfs), &cntlr.pch_spi->hsfs); + + pch_hwseq_set_addr(offset); + + offset += erase_size; + + hsfc = readw_(&cntlr.pch_spi->hsfc); + hsfc &= ~HSFC_FCYCLE; /* clear operation */ + hsfc |= HSFC_FCYCLE; /* set erase operation */ + hsfc |= HSFC_FGO; /* start */ + writew_(hsfc, &cntlr.pch_spi->hsfc); + if (pch_hwseq_wait_for_cycle_complete(timeout, len)) { + printk(BIOS_ERR, "SF: Erase failed at %x\n", + offset - erase_size); + ret = -1; + goto out; + } + } + + printk(BIOS_DEBUG, "SF: Successfully erased %zu bytes @ %#x\n", + len, start); + +out: + spi_release_bus(flash->spi); + return ret; +} + +static void pch_read_data(uint8_t *data, int len) +{ + int i; + uint32_t temp32 = 0; + + for (i = 0; i < len; i++) { + if ((i % 4) == 0) + temp32 = readl_(cntlr.data + i); + + data[i] = (temp32 >> ((i % 4) * 8)) & 0xff; + } +} + +static int pch_hwseq_read(struct spi_flash *flash, + u32 addr, size_t len, void *buf) +{ + uint16_t hsfc; + uint16_t timeout = 100 * 60; + uint8_t block_len; + + if (addr + len > spi_get_flash_size()) { + printk(BIOS_ERR, + "Attempt to read %x-%x which is out of chip\n", + (unsigned) addr, + (unsigned) addr+(unsigned) len); + return -1; + } + + /* clear FDONE, FCERR, AEL by writing 1 to them (if they are set) */ + writew_(readw_(&cntlr.pch_spi->hsfs), &cntlr.pch_spi->hsfs); + + while (len > 0) { + block_len = min(len, cntlr.databytes); + if (block_len > (~addr & 0xff)) + block_len = (~addr & 0xff) + 1; + pch_hwseq_set_addr(addr); + hsfc = readw_(&cntlr.pch_spi->hsfc); + hsfc &= ~HSFC_FCYCLE; /* set read operation */ + hsfc &= ~HSFC_FDBC; /* clear byte count */ + /* set byte count */ + hsfc |= (((block_len - 1) << HSFC_FDBC_OFF) & HSFC_FDBC); + hsfc |= HSFC_FGO; /* start */ + writew_(hsfc, &cntlr.pch_spi->hsfc); + + if (pch_hwseq_wait_for_cycle_complete(timeout, block_len)) + return 1; + pch_read_data(buf, block_len); + addr += block_len; + buf += block_len; + len -= block_len; + } + return 0; +} + +/* Fill len bytes from the data array into the fdata/spid registers. + * + * Note that using len > flash->pgm->spi.max_data_write will trash the registers + * following the data registers. + */ +static void pch_fill_data(const uint8_t *data, int len) +{ + uint32_t temp32 = 0; + int i; + + if (len <= 0) + return; + + for (i = 0; i < len; i++) { + if ((i % 4) == 0) + temp32 = 0; + + temp32 |= ((uint32_t) data[i]) << ((i % 4) * 8); + + if ((i % 4) == 3) /* 32 bits are full, write them to regs. */ + writel_(temp32, cntlr.data + (i - (i % 4))); + } + i--; + if ((i % 4) != 3) /* Write remaining data to regs. */ + writel_(temp32, cntlr.data + (i - (i % 4))); +} + +static int pch_hwseq_write(struct spi_flash *flash, + u32 addr, size_t len, const void *buf) +{ + uint16_t hsfc; + uint16_t timeout = 100 * 60; + uint8_t block_len; + uint32_t start = addr; + + if (addr + len > spi_get_flash_size()) { + printk(BIOS_ERR, + "Attempt to write 0x%x-0x%x which is out of chip\n", + (unsigned)addr, (unsigned) (addr+len)); + return -1; + } + + /* clear FDONE, FCERR, AEL by writing 1 to them (if they are set) */ + writew_(readw_(&cntlr.pch_spi->hsfs), &cntlr.pch_spi->hsfs); + + while (len > 0) { + block_len = min(len, cntlr.databytes); + if (block_len > (~addr & 0xff)) + block_len = (~addr & 0xff) + 1; + + pch_hwseq_set_addr(addr); + + pch_fill_data(buf, block_len); + hsfc = readw_(&cntlr.pch_spi->hsfc); + hsfc &= ~HSFC_FCYCLE; /* clear operation */ + hsfc |= HSFC_FCYCLE_WR; /* set write operation */ + hsfc &= ~HSFC_FDBC; /* clear byte count */ + /* set byte count */ + hsfc |= (((block_len - 1) << HSFC_FDBC_OFF) & HSFC_FDBC); + hsfc |= HSFC_FGO; /* start */ + writew_(hsfc, &cntlr.pch_spi->hsfc); + + if (pch_hwseq_wait_for_cycle_complete(timeout, block_len)) { + printk(BIOS_ERR, "SF: write failure at %x\n", addr); + return -1; + } + addr += block_len; + buf += block_len; + len -= block_len; + } + printk(BIOS_DEBUG, "SF: Successfully written %u bytes @ %#x\n", + (unsigned) (addr - start), start); + return 0; +} + + +static struct spi_flash *spi_flash_hwseq_probe(struct spi_slave *spi) +{ + struct spi_flash *flash = NULL; + u32 berase; + + flash = malloc(sizeof(*flash)); + if (!flash) { + printk(BIOS_WARNING, "SF: Failed to allocate memory\n"); + return NULL; + } + + flash->spi = spi; + flash->name = "Opaque HW-sequencing"; + + flash->write = pch_hwseq_write; + flash->erase = pch_hwseq_erase; + flash->read = pch_hwseq_read; + pch_hwseq_set_addr(0); + + berase = (cntlr.hsfs >> SPIBAR_HSFS_BERASE_OFFSET) & + SPIBAR_HSFS_BERASE_MASK; + + switch (berase) { + case 0: + flash->sector_size = 256; + break; + case 1: + flash->sector_size = 4096; + break; + case 2: + flash->sector_size = 8192; + break; + case 3: + flash->sector_size = 65536; + break; + } + + flash->size = spi_get_flash_size(); + + return flash; +} diff --git a/src/soc/intel/skylake/gpio.c b/src/soc/intel/skylake/gpio.c index dc7d713..9f7b409 100644 --- a/src/soc/intel/skylake/gpio.c +++ b/src/soc/intel/skylake/gpio.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -11,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <stdint.h> @@ -22,178 +19,305 @@ #include <arch/io.h> #include <device/device.h> #include <device/pci.h> -#include <soc/gpio.h> +#include <gpio.h> +#include <soc/pcr.h> #include <soc/iomap.h> #include <soc/pm.h> +/* Keep the ordering intact GPP_A ~ G, GPD. + * As the gpio/smi functions get_smi_status() and + * enable_gpio_groupsmi() depends on this ordering. + */ +static const GPIO_GROUP_INFO gpio_group_info[] = { + /* GPP_A */ + { + .community = PID_GPIOCOM0, + .padcfgoffset = R_PCH_PCR_GPIO_GPP_A_PADCFG_OFFSET, + .padpergroup = V_PCH_GPIO_GPP_A_PAD_MAX, + .smistsoffset = R_PCH_PCR_GPIO_GPP_A_SMI_STS, + .smienoffset = R_PCH_PCR_GPIO_GPP_A_SMI_EN, + }, + /* GPP_B */ + { + .community = PID_GPIOCOM0, + .padcfgoffset = R_PCH_PCR_GPIO_GPP_B_PADCFG_OFFSET, + .padpergroup = V_PCH_GPIO_GPP_B_PAD_MAX, + .smistsoffset = R_PCH_PCR_GPIO_GPP_B_SMI_STS, + .smienoffset = R_PCH_PCR_GPIO_GPP_B_SMI_EN, + }, + /* GPP_C */ + { + .community = PID_GPIOCOM1, + .padcfgoffset = R_PCH_PCR_GPIO_GPP_C_PADCFG_OFFSET, + .padpergroup = V_PCH_GPIO_GPP_C_PAD_MAX, + .smistsoffset = R_PCH_PCR_GPIO_GPP_C_SMI_STS, + .smienoffset = R_PCH_PCR_GPIO_GPP_C_SMI_EN, + }, + /* GPP_D */ + { + .community = PID_GPIOCOM1, + .padcfgoffset = R_PCH_PCR_GPIO_GPP_D_PADCFG_OFFSET, + .padpergroup = V_PCH_GPIO_GPP_D_PAD_MAX, + .smistsoffset = R_PCH_PCR_GPIO_GPP_D_SMI_STS, + .smienoffset = R_PCH_PCR_GPIO_GPP_D_SMI_EN, + }, + /* GPP_E */ + { + .community = PID_GPIOCOM1, + .padcfgoffset = R_PCH_PCR_GPIO_GPP_E_PADCFG_OFFSET, + .padpergroup = V_PCH_GPIO_GPP_E_PAD_MAX, + .smistsoffset = R_PCH_PCR_GPIO_GPP_E_SMI_STS, + .smienoffset = R_PCH_PCR_GPIO_GPP_E_SMI_EN, + }, + /* GPP_F */ + { + .community = PID_GPIOCOM3, + .padcfgoffset = R_PCH_PCR_GPIO_GPP_F_PADCFG_OFFSET, + .padpergroup = V_PCH_GPIO_GPP_F_PAD_MAX, + .smistsoffset = NO_REGISTER_PROPERTY, + .smienoffset = NO_REGISTER_PROPERTY, + }, + /* GPP_G */ + { + .community = PID_GPIOCOM3, + .padcfgoffset = R_PCH_PCR_GPIO_GPP_G_PADCFG_OFFSET, + .padpergroup = V_PCH_GPIO_GPP_G_PAD_MAX, + .smistsoffset = NO_REGISTER_PROPERTY, + .smienoffset = NO_REGISTER_PROPERTY, + }, + /* GPP_H */ + { + .community = PID_GPIOCOM2, + .padcfgoffset = R_PCH_PCR_GPIO_GPD_PADCFG_OFFSET, + .padpergroup = V_PCH_GPIO_GPD_PAD_MAX, + .smistsoffset = NO_REGISTER_PROPERTY, + .smienoffset = NO_REGISTER_PROPERTY, + }, +}; + /* - * This function will return a number that indicates which PIRQ - * this GPIO maps to. If this is not a PIRQ capable GPIO then - * it will return -1. The GPIO to PIRQ mapping is not linear. + * SPT has 7 GPIO communities named as GPP_A to GPP_G. + * Each community has 24 GPIO PIN. + * Below formula to calculate GPIO Pin from GPIO PAD. + * PIN# = GROUP_PAD# + GROUP# * 24 + * ==================================== + * Community || Group# + * ==================================== + * GPP_A || 0 + * GPP_B || 1 + * GPP_C || 2 + * GPP_D || 3 + * GPP_E || 4 + * GPP_F || 5 + * GPP_G || 6 */ -static int gpio_to_pirq(int gpio) +static u32 get_padnumber_from_gpiopad(GPIO_PAD gpiopad) { - switch (gpio) { - case 8: return 0; /* PIRQI */ - case 9: return 1; /* PIRQJ */ - case 10: return 2; /* PIRQK */ - case 13: return 3; /* PIRQL */ - case 14: return 4; /* PIRQM */ - case 45: return 5; /* PIRQN */ - case 46: return 6; /* PIRQO */ - case 47: return 7; /* PIRQP */ - case 48: return 8; /* PIRQQ */ - case 49: return 9; /* PIRQR */ - case 50: return 10; /* PIRQS */ - case 51: return 11; /* PIRQT */ - case 52: return 12; /* PIRQU */ - case 53: return 13; /* PIRQV */ - case 54: return 14; /* PIRQW */ - case 55: return 15; /* PIRQX */ - default: return -1; - }; + return (u32) GPIO_GET_PAD_NUMBER(gpiopad); } -void init_one_gpio(int gpio_num, struct gpio_config *config) +static u32 get_groupindex_from_gpiopad(GPIO_PAD gpiopad) { - u32 owner, route, irqen, reset; - int set, bit; + return (u32) GPIO_GET_GROUP_INDEX_FROM_PAD(gpiopad); +} - if (gpio_num > MAX_GPIO_NUMBER || !config) - return; +static int read_write_gpio_pad_reg(u32 gpiopad, u8 dwreg, u32 mask, int write, + u32 *readwriteval) +{ + u32 padcfgreg; + u32 gpiogroupinfolength; + u32 groupindex; + u32 padnumber; - outl(config->conf0, GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)); - outl(config->conf1, GPIO_BASE_ADDRESS + GPIO_CONFIG1(gpio_num)); - - /* Determine set and bit based on GPIO number */ - set = gpio_num >> 5; - bit = gpio_num % 32; - - /* Save settings from current GPIO config */ - owner = inl(GPIO_BASE_ADDRESS + GPIO_OWNER(set)); - route = inl(GPIO_BASE_ADDRESS + GPIO_ROUTE(set)); - irqen = inl(GPIO_BASE_ADDRESS + GPIO_IRQ_IE(set)); - reset = inl(GPIO_BASE_ADDRESS + GPIO_RESET(set)); - - owner |= config->owner << bit; - route |= config->route << bit; - irqen |= config->irqen << bit; - reset |= config->reset << bit; - - outl(owner, GPIO_BASE_ADDRESS + GPIO_OWNER(set)); - outl(route, GPIO_BASE_ADDRESS + GPIO_ROUTE(set)); - outl(irqen, GPIO_BASE_ADDRESS + GPIO_IRQ_IE(set)); - outl(reset, GPIO_BASE_ADDRESS + GPIO_RESET(set)); - - if (set == 0) { - u32 blink = inl(GPIO_BASE_ADDRESS + GPIO_BLINK); - blink |= config->blink << bit; - outl(blink, GPIO_BASE_ADDRESS + GPIO_BLINK); - } + groupindex = get_groupindex_from_gpiopad(gpiopad); + padnumber = get_padnumber_from_gpiopad(gpiopad); + + gpiogroupinfolength = sizeof(gpio_group_info) / sizeof(GPIO_GROUP_INFO); - /* PIRQ to IO-APIC map */ - if (config->pirq == GPIO_PIRQ_APIC_ROUTE) { - u32 pirq2apic = inl(GPIO_BASE_ADDRESS + GPIO_PIRQ_APIC_EN); - set = gpio_to_pirq(gpio_num); - if (set >= 0) { - pirq2apic |= 1 << set; - outl(pirq2apic, GPIO_BASE_ADDRESS + GPIO_PIRQ_APIC_EN); - } + /* Check if group argument exceeds GPIO GROUP INFO array */ + if ((u32) groupindex >= gpiogroupinfolength) + return -1; + /* Check if legal pin number */ + if (padnumber >= gpio_group_info[groupindex].padpergroup) + return -1; + /* Create Pad Configuration register offset */ + padcfgreg = 0x8 * padnumber + gpio_group_info[groupindex].padcfgoffset; + if (dwreg == 1) + padcfgreg += 0x4; + if (write) { + pcr_andthenor32(gpio_group_info[groupindex].community, + padcfgreg, (u32) (~mask), + (u32) (*readwriteval & mask)); + } else { + pcr_read32(gpio_group_info[groupindex].community, padcfgreg, + readwriteval); + *readwriteval &= mask; } + + return 0; } -void init_gpios(const struct gpio_config config[]) +static int convert_gpio_num_to_pad(gpio_t gpionum) { - const struct gpio_config *entry; - u32 owner[3] = {0}; - u32 route[3] = {0}; - u32 irqen[3] = {0}; - u32 reset[3] = {0}; - u32 blink = 0; - u16 pirq2apic = 0; - int set, bit, gpio = 0; - - for (entry = config; entry->conf0 != GPIO_LIST_END; entry++, gpio++) { - if (gpio > MAX_GPIO_NUMBER) - break; - - /* Setup Configuration registers 1 and 2 */ - outl(entry->conf0, GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio)); - outl(entry->conf1, GPIO_BASE_ADDRESS + GPIO_CONFIG1(gpio)); - - /* Determine set and bit based on GPIO number */ - set = gpio >> 5; - bit = gpio % 32; - - /* Apply settings to set specific bits */ - owner[set] |= entry->owner << bit; - route[set] |= entry->route << bit; - irqen[set] |= entry->irqen << bit; - reset[set] |= entry->reset << bit; - - if (set == 0) - blink |= entry->blink << bit; - - /* PIRQ to IO-APIC map */ - if (entry->pirq == GPIO_PIRQ_APIC_ROUTE) { - set = gpio_to_pirq(gpio); - if (set >= 0) - pirq2apic |= 1 << set; - } - } + int group_pad_num = 0; + int gpio_group = 0; + u32 gpio_pad = 0; + + group_pad_num = (gpionum % MAX_GPIO_PIN_PER_GROUP); + gpio_group = (gpionum / MAX_GPIO_PIN_PER_GROUP); + + switch (gpio_group) { + case GPIO_LP_GROUP_A: + gpio_pad = GPIO_LP_GROUP_GPP_A; + break; - for (set = 0; set <= 2; set++) { - outl(owner[set], GPIO_BASE_ADDRESS + GPIO_OWNER(set)); - outl(route[set], GPIO_BASE_ADDRESS + GPIO_ROUTE(set)); - outl(irqen[set], GPIO_BASE_ADDRESS + GPIO_IRQ_IE(set)); - outl(reset[set], GPIO_BASE_ADDRESS + GPIO_RESET(set)); + case GPIO_LP_GROUP_B: + gpio_pad = GPIO_LP_GROUP_GPP_B; + break; + + case GPIO_LP_GROUP_C: + gpio_pad = GPIO_LP_GROUP_GPP_C; + break; + + case GPIO_LP_GROUP_D: + gpio_pad = GPIO_LP_GROUP_GPP_D; + break; + + case GPIO_LP_GROUP_E: + gpio_pad = GPIO_LP_GROUP_GPP_E; + break; + + case GPIO_LP_GROUP_F: + gpio_pad = GPIO_LP_GROUP_GPP_F; + break; + + case GPIO_LP_GROUP_G: + gpio_pad = GPIO_LP_GROUP_GPP_G; + break; + default: + return -1; + break; } + gpio_pad = (gpio_pad << GPIO_GROUP_SHIFT) + group_pad_num; - outl(blink, GPIO_BASE_ADDRESS + GPIO_BLINK); - outl(pirq2apic, GPIO_BASE_ADDRESS + GPIO_PIRQ_APIC_EN); + return gpio_pad; } -int get_gpio(int gpio_num) +int gpio_get(gpio_t gpio_num) { + u32 gpiopad = 0; + u32 outputvalue = 0; + int status = 0; + if (gpio_num > MAX_GPIO_NUMBER) return 0; - return !!(inl(GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)) & GPI_LEVEL); + gpiopad = convert_gpio_num_to_pad(gpio_num); + if (gpiopad < 0) + return -1; + + status = read_write_gpio_pad_reg(gpiopad, + 0, + B_PCH_GPIO_TX_STATE, + READ, &outputvalue); + outputvalue >>= N_PCH_GPIO_TX_STATE; + return outputvalue; } -/* - * get a number comprised of multiple GPIO values. gpio_num_array points to - * the array of gpio pin numbers to scan, terminated by -1. - */ -unsigned get_gpios(const int *gpio_num_array) +void gpio_set(gpio_t gpio_num, int value) { - int gpio; - unsigned bitmask = 1; - unsigned vector = 0; - - while (bitmask && - ((gpio = *gpio_num_array++) != -1)) { - if (get_gpio(gpio)) - vector |= bitmask; - bitmask <<= 1; + int status = 0; + u32 gpiopad = 0; + u32 outputvalue = 0; + + if (gpio_num > MAX_GPIO_NUMBER) + return; + + gpiopad = convert_gpio_num_to_pad(gpio_num); + if (gpiopad < 0) + return; + + outputvalue = value; + + status = read_write_gpio_pad_reg(gpiopad, + 0, + B_PCH_GPIO_TX_STATE, + WRITE, &outputvalue); +} + +void clear_all_smi(void) +{ + u32 gpiogroupinfolength; + u32 gpioindex = 0; + + gpiogroupinfolength = sizeof(gpio_group_info) / sizeof(GPIO_GROUP_INFO); + + for (gpioindex = 0; gpioindex < gpiogroupinfolength; gpioindex++) { + /*Check if group has GPI SMI register */ + if (gpio_group_info[gpioindex].smistsoffset == + NO_REGISTER_PROPERTY) + continue; + /* Clear all GPI SMI Status bits by writing '1' */ + pcr_write32(gpio_group_info[gpioindex].community, + gpio_group_info[gpioindex].smistsoffset, + 0xFFFFFFFF); } - return vector; } -void set_gpio(int gpio_num, int value) +void get_smi_status(u32 status[GPIO_COMMUNITY_MAX]) { - u32 conf0; + u32 num_of_communities; + u32 gpioindex; + u32 outputvalue = 0; - if (gpio_num > MAX_GPIO_NUMBER) - return; + num_of_communities = ARRAY_SIZE(gpio_group_info); - conf0 = inl(GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)); - conf0 &= ~GPO_LEVEL_MASK; - conf0 |= value << GPO_LEVEL_SHIFT; - outl(conf0, GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)); + for (gpioindex = 0; gpioindex < num_of_communities; gpioindex++) { + /*Check if group has GPI SMI register */ + if (gpio_group_info[gpioindex].smistsoffset == + NO_REGISTER_PROPERTY) + continue; + /* Read SMI status register */ + pcr_read32(gpio_group_info[gpioindex].community, + gpio_group_info[gpioindex].smistsoffset, + &outputvalue); + status[gpioindex] = outputvalue; + } } -int gpio_is_native(int gpio_num) +void enable_all_smi(void) { - return !(inl(GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)) & 1); + u32 gpiogroupinfolength; + u32 gpioindex = 0; + + gpiogroupinfolength = sizeof(gpio_group_info) / sizeof(GPIO_GROUP_INFO); + + for (gpioindex = 0; gpioindex < gpiogroupinfolength; gpioindex++) { + /*Check if group has GPI SMI register */ + if (gpio_group_info[gpioindex].smienoffset == + NO_REGISTER_PROPERTY) + continue; + /* Set all GPI SMI Enable bits by writing '1' */ + pcr_write32(gpio_group_info[gpioindex].community, + gpio_group_info[gpioindex].smienoffset, + 0xFFFFFFFF); + } +} + +void enable_gpio_groupsmi(gpio_t gpio_num, u32 mask) +{ + u32 gpioindex = 0; + u32 smien = 0; + + if (gpio_num > MAX_GPIO_NUMBER) + return; + + gpioindex = (gpio_num / MAX_GPIO_PIN_PER_GROUP); + + pcr_read32(gpio_group_info[gpioindex].community, + gpio_group_info[gpioindex].smienoffset, &smien); + smien |= mask; + /* Set all GPI SMI Enable bits by writing '1' */ + pcr_write32(gpio_group_info[gpioindex].community, + gpio_group_info[gpioindex].smienoffset, smien); } diff --git a/src/soc/intel/skylake/hda.c b/src/soc/intel/skylake/hda.c deleted file mode 100644 index b2992e8..0000000 --- a/src/soc/intel/skylake/hda.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <arch/io.h> -#include <delay.h> -#include <soc/intel/common/hda_verb.h> -#include <soc/pch.h> -#include <soc/ramstage.h> -#include <soc/rcba.h> - -const u32 * cim_verb_data = NULL; -u32 cim_verb_data_size = 0; -const u32 * pc_beep_verbs = NULL; -u32 pc_beep_verbs_size = 0; - -static void codecs_init(u8 *base, u32 codec_mask) -{ - int i; - - /* Can support up to 4 codecs */ - for (i = 3; i >= 0; i--) { - if (codec_mask & (1 << i)) - hda_codec_init(base, i, - cim_verb_data_size, - cim_verb_data); - } - - if (pc_beep_verbs_size && pc_beep_verbs) - hda_codec_write(base, pc_beep_verbs_size, pc_beep_verbs); -} - -static void hda_pch_init(struct device *dev, u8 *base) -{ - u8 reg8; - u16 reg16; - u32 reg32; - - if (RCBA32(0x2030) & (1 << 31)) { - reg32 = pci_read_config32(dev, 0x120); - reg32 &= 0xf8ffff01; - reg32 |= (1 << 25); - reg32 |= RCBA32(0x2030) & 0xfe; - pci_write_config32(dev, 0x120, reg32); - } else - printk(BIOS_DEBUG, "HDA: V1CTL disabled.\n"); - - reg32 = pci_read_config32(dev, 0x114); - reg32 &= ~0xfe; - pci_write_config32(dev, 0x114, reg32); - - // Set VCi enable bit - if (pci_read_config32(dev, 0x120) & ((1 << 24) | - (1 << 25) | (1 << 26))) { - reg32 = pci_read_config32(dev, 0x120); - reg32 &= ~(1 << 31); - pci_write_config32(dev, 0x120, reg32); - } - - /* Additional programming steps */ - reg32 = pci_read_config32(dev, 0xc4); - reg32 |= (1 << 24); - pci_write_config32(dev, 0xc4, reg32); - - reg8 = pci_read_config8(dev, 0x40); // Audio Control - reg8 |= 1; // Select HDA mode - pci_write_config8(dev, 0x40, reg8); - - reg8 = pci_read_config8(dev, 0x4d); // Docking Status - reg8 &= ~(1 << 7); // Docking not supported - pci_write_config8(dev, 0x4d, reg8); - - reg16 = read32(base + 0x0012); - reg16 |= (1 << 0); - write32(base + 0x0012, reg16); - - /* disable Auto Voltage Detector */ - reg8 = pci_read_config8(dev, 0x42); - reg8 |= (1 << 2); - pci_write_config8(dev, 0x42, reg8); -} - -static void hda_init(struct device *dev) -{ - u8 *base; - struct resource *res; - u32 codec_mask; - u32 reg32; - - /* Find base address */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (!res) - return; - - base = res2mmio(res, 0, 0); - printk(BIOS_DEBUG, "HDA: base = %p\n", base); - - /* Set Bus Master */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); - - hda_pch_init(dev, base); - - codec_mask = hda_codec_detect(base); - - if (codec_mask) { - printk(BIOS_DEBUG, "HDA: codec_mask = %02x\n", codec_mask); - codecs_init(base, codec_mask); - } -} - -static void hda_enable(struct device *dev) -{ - u32 reg32; - u8 reg8; - - reg8 = pci_read_config8(dev, 0x43); - reg8 |= 0x6f; - pci_write_config8(dev, 0x43, reg8); - - if (!dev->enabled) { - /* Route I/O buffers to ADSP function */ - reg8 = pci_read_config8(dev, 0x42); - reg8 |= (1 << 7) | (1 << 6); - pci_write_config8(dev, 0x42, reg8); - - printk(BIOS_INFO, "HDA disabled, I/O buffers routed to ADSP\n"); - - /* Ensure memory, io, and bus master are all disabled */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 &= ~(PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | PCI_COMMAND_IO); - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* Disable this device */ - pch_disable_devfn(dev); - } -} - -static struct device_operations hda_ops = { - .read_resources = &pci_dev_read_resources, - .set_resources = &pci_dev_set_resources, - .enable_resources = &pci_dev_enable_resources, - .init = &hda_init, - .enable = &hda_enable, - .ops_pci = &broadwell_pci_ops, -}; - -static const unsigned short pci_device_ids[] = { - 0x9c20, /* LynxPoint-LP */ - 0x9ca0, /* WildcatPoint */ - 0 -}; - -static const struct pci_driver pch_hda __pci_driver = { - .ops = &hda_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; diff --git a/src/soc/intel/skylake/igd.c b/src/soc/intel/skylake/igd.c index 86da0a9..74f325f 100644 --- a/src/soc/intel/skylake/igd.c +++ b/src/soc/intel/skylake/igd.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,12 +15,12 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/acpi.h> #include <arch/io.h> -#include <bootmode.h> +#include <chip.h> #include <console/console.h> #include <delay.h> #include <device/device.h> @@ -33,214 +34,13 @@ #include <soc/pm.h> #include <soc/ramstage.h> #include <soc/systemagent.h> -#include <soc/intel/broadwell/chip.h> #include <vendorcode/google/chromeos/chromeos.h> -#define GT_RETRY 1000 +#define GT_RETRY 1000 #define GT_CDCLK_337 0 #define GT_CDCLK_450 1 #define GT_CDCLK_540 2 #define GT_CDCLK_675 3 - -struct reg_script haswell_early_init_script[] = { - /* Enable Force Wake */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa180, 0x00000020), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010001), - REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 1, GT_RETRY), - - /* Enable Counters */ - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa248, 0x00000016), - - /* GFXPAUSE settings */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa000, 0x00070020), - - /* ECO Settings */ - REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0xa180, 0xff3fffff, 0x15000000), - - /* Enable DOP Clock Gating */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9424, 0x000003fd), - - /* Enable Unit Level Clock Gating */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9400, 0x00000080), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9404, 0x40401000), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9408, 0x00000000), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x940c, 0x02000001), - - /* - * RC6 Settings - */ - - /* Wake Rate Limits */ - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa090, 0x00000000), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa098, 0x03e80000), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa09c, 0x00280000), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0a8, 0x0001e848), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0ac, 0x00000019), - - /* Render/Video/Blitter Idle Max Count */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x02054, 0x0000000a), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x12054, 0x0000000a), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x22054, 0x0000000a), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x1a054, 0x0000000a), - - /* RC Sleep / RCx Thresholds */ - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0b0, 0x00000000), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0b4, 0x000003e8), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0b8, 0x0000c350), - - /* RP Settings */ - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa010, 0x000f4240), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa014, 0x12060000), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa02c, 0x0000e808), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa030, 0x0003bd08), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa068, 0x000101d0), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa06c, 0x00055730), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa070, 0x0000000a), - - /* RP Control */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa024, 0x00000b92), - - /* HW RC6 Control */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa090, 0x88040000), - - /* Video Frequency Request */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa00c, 0x08000000), - - /* Set RC6 VIDs */ - REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138128, 0), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138124, 0x80000004), - REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY), - - /* Enable PM Interrupts */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x4402c, 0x03000076), - - /* Enable RC6 in idle */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa094, 0x00040000), - - REG_SCRIPT_END -}; - -static const struct reg_script haswell_late_init_script[] = { - /* Lock settings */ - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a248, (1 << 31)), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a004, (1 << 4)), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a080, (1 << 2)), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a180, (1 << 31)), - - /* Disable Force Wake */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010000), - REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 0, GT_RETRY), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00000001), - - /* Enable power well for DP and Audio */ - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x45400, (1 << 31)), - REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x45400, - (1 << 30), (1 << 30), GT_RETRY), - - REG_SCRIPT_END -}; - -static const struct reg_script broadwell_early_init_script[] = { - /* Enable Force Wake */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010001), - REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 1, GT_RETRY), - - /* Enable push bus metric control and shift */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa248, 0x00000004), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa250, 0x000000ff), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa25c, 0x00000010), - - /* GFXPAUSE settings (set based on stepping) */ - - /* ECO Settings */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa180, 0x45200000), - - /* Enable DOP Clock Gating */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9424, 0x000000fd), - - /* Enable Unit Level Clock Gating */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9400, 0x00000000), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9404, 0x40401000), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9408, 0x00000000), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x940c, 0x02000001), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x1a054, 0x0000000a), - - /* Video Frequency Request */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa00c, 0x08000000), - - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138158, 0x00000009), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x13815c, 0x0000000d), - - /* - * RC6 Settings - */ - - /* Wake Rate Limits */ - REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x0a090, 0, 0), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a098, 0x03e80000), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a09c, 0x00280000), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0a8, 0x0001e848), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0ac, 0x00000019), - - /* Render/Video/Blitter Idle Max Count */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x02054, 0x0000000a), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x12054, 0x0000000a), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x22054, 0x0000000a), - - /* RC Sleep / RCx Thresholds */ - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0b0, 0x00000000), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0b8, 0x00000271), - - /* RP Settings */ - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a010, 0x000f4240), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a014, 0x12060000), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a02c, 0x0000e808), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a030, 0x0003bd08), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a068, 0x000101d0), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a06c, 0x00055730), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a070, 0x0000000a), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a168, 0x00000006), - - /* RP Control */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa024, 0x00000b92), - - /* HW RC6 Control */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa090, 0x90040000), - - /* Set RC6 VIDs */ - REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138128, 0), - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138124, 0x80000004), - REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY), - - /* Enable PM Interrupts */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x4402c, 0x03000076), - - /* Enable RC6 in idle */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa094, 0x00040000), - - REG_SCRIPT_END -}; - -static const struct reg_script broadwell_late_init_script[] = { - /* Lock settings */ - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a248, (1 << 31)), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a000, (1 << 18)), - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a180, (1 << 31)), - - /* Disable Force Wake */ - REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010000), - REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 0, GT_RETRY), - - /* Enable power well for DP and Audio */ - REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x45400, (1 << 31)), - REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x45400, - (1 << 30), (1 << 30), GT_RETRY), - - REG_SCRIPT_END -}; - u32 map_oprom_vendev(u32 vendev) { return SA_IGD_OPROM_VENDEV; @@ -251,14 +51,13 @@ static struct resource *gtt_res = NULL; static unsigned long gtt_read(unsigned long reg) { u32 val; - val = read32(res2mmio(gtt_res, reg, 0)); + val = read32((void *)(unsigned int)(gtt_res->base + reg)); return val; - } static void gtt_write(unsigned long reg, unsigned long data) { - write32(res2mmio(gtt_res, reg, 0), data); + write32((void *)(unsigned int)(gtt_res->base + reg), data); } static inline void gtt_rmw(u32 reg, u32 andmask, u32 ormask) @@ -269,216 +68,8 @@ static inline void gtt_rmw(u32 reg, u32 andmask, u32 ormask) gtt_write(reg, val); } -static int gtt_poll(u32 reg, u32 mask, u32 value) -{ - unsigned try = GT_RETRY; - u32 data; - - while (try--) { - data = gtt_read(reg); - if ((data & mask) == value) - return 1; - udelay(10); - } - - printk(BIOS_ERR, "GT init timeout\n"); - return 0; -} - -static void igd_setup_panel(struct device *dev) -{ - config_t *conf = dev->chip_info; - u32 reg32; - - /* Setup Digital Port Hotplug */ - reg32 = gtt_read(PCH_PORT_HOTPLUG); - if (!reg32) { - reg32 = (conf->gpu_dp_b_hotplug & 0x7) << 2; - reg32 |= (conf->gpu_dp_c_hotplug & 0x7) << 10; - reg32 |= (conf->gpu_dp_d_hotplug & 0x7) << 18; - gtt_write(PCH_PORT_HOTPLUG, reg32); - } - - /* Setup Panel Power On Delays */ - reg32 = gtt_read(PCH_PP_ON_DELAYS); - if (!reg32) { - reg32 = (conf->gpu_panel_port_select & 0x3) << 30; - reg32 |= (conf->gpu_panel_power_up_delay & 0x1fff) << 16; - reg32 |= (conf->gpu_panel_power_backlight_on_delay & 0x1fff); - gtt_write(PCH_PP_ON_DELAYS, reg32); - } - - /* Setup Panel Power Off Delays */ - reg32 = gtt_read(PCH_PP_OFF_DELAYS); - if (!reg32) { - reg32 = (conf->gpu_panel_power_down_delay & 0x1fff) << 16; - reg32 |= (conf->gpu_panel_power_backlight_off_delay & 0x1fff); - gtt_write(PCH_PP_OFF_DELAYS, reg32); - } - - /* Setup Panel Power Cycle Delay */ - if (conf->gpu_panel_power_cycle_delay) { - reg32 = gtt_read(PCH_PP_DIVISOR); - reg32 &= ~0xff; - reg32 |= conf->gpu_panel_power_cycle_delay & 0xff; - gtt_write(PCH_PP_DIVISOR, reg32); - } - - /* Enable Backlight if needed */ - if (conf->gpu_cpu_backlight) { - gtt_write(BLC_PWM_CPU_CTL2, BLC_PWM2_ENABLE); - gtt_write(BLC_PWM_CPU_CTL, conf->gpu_cpu_backlight); - } - if (conf->gpu_pch_backlight) { - gtt_write(BLC_PWM_PCH_CTL1, BLM_PCH_PWM_ENABLE); - gtt_write(BLC_PWM_PCH_CTL2, conf->gpu_pch_backlight); - } -} - -static void igd_cdclk_init_haswell(struct device *dev) -{ - config_t *conf = dev->chip_info; - int cdclk = conf->cdclk; - int devid = pci_read_config16(dev, PCI_DEVICE_ID); - int gpu_is_ulx = 0; - u32 dpdiv, lpcll; - - /* Check for ULX GT1 or GT2 */ - if (devid == 0x0a0e || devid == 0x0a1e) - gpu_is_ulx = 1; - - /* 675MHz is not supported on haswell */ - if (cdclk == GT_CDCLK_675) - cdclk = GT_CDCLK_337; - - /* If CD clock is fixed or ULT then set to 450MHz */ - if ((gtt_read(0x42014) & 0x1000000) || cpu_is_ult()) - cdclk = GT_CDCLK_450; - - /* 540MHz is not supported on ULX */ - if (gpu_is_ulx && cdclk == GT_CDCLK_540) - cdclk = GT_CDCLK_337; - - /* 337.5MHz is not supported on non-ULT/ULX */ - if (!gpu_is_ulx && !cpu_is_ult() && cdclk == GT_CDCLK_337) - cdclk = GT_CDCLK_450; - - /* Set variables based on CD Clock setting */ - switch (cdclk) { - case GT_CDCLK_337: - dpdiv = 169; - lpcll = (1 << 26); - break; - case GT_CDCLK_450: - dpdiv = 225; - lpcll = 0; - break; - case GT_CDCLK_540: - dpdiv = 270; - lpcll = (1 << 26); - break; - default: - return; - } - - /* Set LPCLL_CTL CD Clock Frequency Select */ - gtt_rmw(0x130040, 0xf3ffffff, lpcll); - - /* ULX: Inform power controller of selected frequency */ - if (gpu_is_ulx) { - if (cdclk == GT_CDCLK_450) - gtt_write(0x138128, 0x00000000); /* 450MHz */ - else - gtt_write(0x138128, 0x00000001); /* 337.5MHz */ - gtt_write(0x13812c, 0x00000000); - gtt_write(0x138124, 0x80000017); - } - - /* Set CPU DP AUX 2X bit clock dividers */ - gtt_rmw(0x64010, 0xfffff800, dpdiv); - gtt_rmw(0x64810, 0xfffff800, dpdiv); -} - -static void igd_cdclk_init_broadwell(struct device *dev) -{ - config_t *conf = dev->chip_info; - int cdclk = conf->cdclk; - u32 dpdiv, lpcll, pwctl, cdset; - - /* Inform power controller of upcoming frequency change */ - gtt_write(0x138128, 0); - gtt_write(0x13812c, 0); - gtt_write(0x138124, 0x80000018); - - /* Poll GT driver mailbox for run/busy clear */ - if (!gtt_poll(0x138124, (1 << 31), (0 << 31))) - cdclk = GT_CDCLK_450; - - if (gtt_read(0x42014) & 0x1000000) { - /* If CD clock is fixed then set to 450MHz */ - cdclk = GT_CDCLK_450; - } else { - /* Program CD clock to highest supported freq */ - if (cpu_is_ult()) - cdclk = GT_CDCLK_540; - else - cdclk = GT_CDCLK_675; - } - - /* CD clock frequency 675MHz not supported on ULT */ - if (cpu_is_ult() && cdclk == GT_CDCLK_675) - cdclk = GT_CDCLK_540; - - /* Set variables based on CD Clock setting */ - switch (cdclk) { - case GT_CDCLK_337: - cdset = 337; - lpcll = (1 << 27); - pwctl = 2; - dpdiv = 169; - break; - case GT_CDCLK_450: - cdset = 449; - lpcll = 0; - pwctl = 0; - dpdiv = 225; - break; - case GT_CDCLK_540: - cdset = 539; - lpcll = (1 << 26); - pwctl = 1; - dpdiv = 270; - break; - case GT_CDCLK_675: - cdset = 674; - lpcll = (1 << 26) | (1 << 27); - pwctl = 3; - dpdiv = 338; - default: - return; - } - - /* Set LPCLL_CTL CD Clock Frequency Select */ - gtt_rmw(0x130040, 0xf3ffffff, lpcll); - - /* Inform power controller of selected frequency */ - gtt_write(0x138128, pwctl); - gtt_write(0x13812c, 0); - gtt_write(0x138124, 0x80000017); - - /* Program CD Clock Frequency */ - gtt_rmw(0x46200, 0xfffffc00, cdset); - - /* Set CPU DP AUX 2X bit clock dividers */ - gtt_rmw(0x64010, 0xfffff800, dpdiv); - gtt_rmw(0x64810, 0xfffff800, dpdiv); -} - static void igd_init(struct device *dev) { - int is_broadwell = !!(cpu_family_model() == BROADWELL_FAMILY_ULT); - u32 rp1_gfx_freq; - /* IGD needs to be Bus Master */ u32 reg32 = pci_read_config32(dev, PCI_COMMAND); reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO; @@ -491,58 +82,19 @@ static void igd_init(struct device *dev) /* Wait for any configured pre-graphics delay */ if (acpi_slp_type != SLEEP_STATE_S3) { #if IS_ENABLED(CONFIG_CHROMEOS) - if (developer_mode_enabled() || recovery_mode_enabled() || - vboot_wants_oprom()) - mdelay(CONFIG_PRE_GRAPHICS_DELAY); -#else + if (developer_mode_enabled() || recovery_mode_enabled() || + vboot_wants_oprom()) mdelay(CONFIG_PRE_GRAPHICS_DELAY); +#else + mdelay(CONFIG_PRE_GRAPHICS_DELAY); #endif - } - /* Early init steps */ - if (is_broadwell) { - reg_script_run_on_dev(dev, broadwell_early_init_script); - - /* Set GFXPAUSE based on stepping */ - if (cpu_stepping() <= (CPUID_BROADWELL_E0 & 0xf) && - systemagent_revision() <= 9) { - gtt_write(0xa000, 0x300ff); - } else { - gtt_write(0xa000, 0x30020); - } - } else { - reg_script_run_on_dev(dev, haswell_early_init_script); } - - /* Set RP1 graphics frequency */ - rp1_gfx_freq = (MCHBAR32(0x5998) >> 8) & 0xff; - gtt_write(0xa008, rp1_gfx_freq << 24); - - /* Post VBIOS panel setup */ - igd_setup_panel(dev); - /* Initialize PCI device, load/execute BIOS Option ROM */ pci_dev_init(dev); - /* Late init steps */ - if (is_broadwell) { - igd_cdclk_init_broadwell(dev); - reg_script_run_on_dev(dev, broadwell_late_init_script); - } else { - igd_cdclk_init_haswell(dev); - reg_script_run_on_dev(dev, haswell_late_init_script); - } - - if (gfx_get_init_done()) { - /* - * Work around VBIOS issue that is not clearing first 64 - * bytes of the framebuffer during VBE mode set. - */ - struct resource *fb = find_resource(dev, PCI_BASE_ADDRESS_2); - memset((void *)((u32)fb->base), 0, 64); - } - - if (!gfx_get_init_done() && acpi_slp_type != 3) { +#if IS_ENABLED(CONFIG_CHROMEOS) + if (!gfx_get_init_done() && !acpi_is_wakeup_s3()) { /* * Enable DDI-A if the Option ROM did not execute: * @@ -553,27 +105,38 @@ static void igd_init(struct device *dev) gtt_write(DDI_BUF_CTL_A, DDI_BUF_IS_IDLE | DDI_A_4_LANES | DDI_INIT_DISPLAY_DETECTED); } +#endif /* CONFIG_CHROMEOS */ +} + +static void igd_read_resources(struct device *dev) +{ + pci_dev_read_resources(dev); + +#if IS_ENABLED(CONFIG_MARK_GRAPHICS_MEM_WRCOMB) + struct resource *res; + + /* Set the graphics memory to write combining. */ + res = find_resource(dev, PCI_BASE_ADDRESS_2); + if (res == NULL) { + printk(BIOS_DEBUG, "gma: memory resource not found.\n"); + return; + } + res->flags |= IORESOURCE_WRCOMB; +#endif } static struct device_operations igd_ops = { - .read_resources = &pci_dev_read_resources, + .read_resources = &igd_read_resources, .set_resources = &pci_dev_set_resources, .enable_resources = &pci_dev_enable_resources, .init = &igd_init, - .ops_pci = &broadwell_pci_ops, + .ops_pci = &soc_pci_ops, }; static const unsigned short pci_device_ids[] = { - IGD_HASWELL_ULT_GT1, - IGD_HASWELL_ULT_GT2, - IGD_HASWELL_ULT_GT3, - IGD_BROADWELL_U_GT1, - IGD_BROADWELL_U_GT2, - IGD_BROADWELL_U_GT3_15W, - IGD_BROADWELL_U_GT3_28W, - IGD_BROADWELL_Y_GT2, - IGD_BROADWELL_H_GT2, - IGD_BROADWELL_H_GT3, + IGD_SKYLAKE_GT1_SULTM, + IGD_SKYLAKE_GT2_SULXM, + IGD_SKYLAKE_GT2_SULTM, 0, }; diff --git a/src/soc/intel/skylake/include/soc/acpi.h b/src/soc/intel/skylake/include/soc/acpi.h index 2b1e77e..cd1a663 100644 --- a/src/soc/intel/skylake/include/soc/acpi.h +++ b/src/soc/intel/skylake/include/soc/acpi.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,11 +15,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_ACPI_H_ -#define _BROADWELL_ACPI_H_ +#ifndef _SOC_ACPI_H_ +#define _SOC_ACPI_H_ #include <arch/acpi.h> #include <soc/nvs.h> @@ -29,9 +30,13 @@ #define PSS_LATENCY_TRANSITION 10 #define PSS_LATENCY_BUSMASTER 10 -void acpi_create_intel_hpet(acpi_hpet_t *hpet); +void acpi_create_serialio_ssdt(acpi_header_t *ssdt); void acpi_fill_in_fadt(acpi_fadt_t *fadt); unsigned long acpi_madt_irq_overrides(unsigned long current); void acpi_init_gnvs(global_nvs_t *gnvs); +void southcluster_inject_dsdt(device_t device); +unsigned long southcluster_write_acpi_tables(device_t device, + unsigned long current, struct acpi_rsdp *rsdp); + +#endif /* _SOC_ACPI_H_ */ -#endif diff --git a/src/soc/intel/skylake/include/soc/adsp.h b/src/soc/intel/skylake/include/soc/adsp.h deleted file mode 100644 index 747a123..0000000 --- a/src/soc/intel/skylake/include/soc/adsp.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _BROADWELL_ADSP_H_ -#define _BROADWELL_ADSP_H_ - -#define ADSP_PCI_IRQ 23 -#define ADSP_ACPI_IRQ 3 -#define ADSP_ACPI_IRQEN (1 << 3) - -#define ADSP_SHIM_BASE_LPT 0xe7000 -#define ADSP_SHIM_BASE_WPT 0xfb000 -#define ADSP_SHIM_LTRC 0xe0 -#define ADSP_SHIM_LTRC_VALUE 0x3003 -#define ADSP_SHIM_IMC 0x28 -#define ADSP_SHIM_IPCD 0x40 - -#define ADSP_PCI_VDRTCTL0 0xa0 -#define ADSP_VDRTCTL0_D3PGD_LPT (1 << 1) -#define ADSP_VDRTCTL0_D3PGD_WPT (1 << 0) -#define ADSP_VDRTCTL0_D3SRAMPGD_LPT (1 << 2) -#define ADSP_VDRTCTL0_D3SRAMPGD_WPT (1 << 1) -#define ADSP_PCI_VDRTCTL1 0xa4 -#define ADSP_PCI_VDRTCTL2 0xa8 -#define ADSP_VDRTCTL2_VALUE 0x00000fff - -#define ADSP_IOBP_VDLDAT1 0xd7000624 -#define ADSP_VDLDAT1_VALUE 0x00040100 -#define ADSP_IOBP_VDLDAT2 0xd7000628 -#define ADSP_IOBP_ACPI_IRQ3 0xd9d8 -#define ADSP_IOBP_ACPI_IRQ3I 0xd8d9 -#define ADSP_IOBP_ACPI_IRQ4 0xdbda -#define ADSP_IOBP_PMCTL 0xd70001e0 -#define ADSP_PMCTL_VALUE 0x3f -#define ADSP_IOBP_PCICFGCTL 0xd7000500 -#define ADSP_PCICFGCTL_PCICD (1 << 0) -#define ADSP_PCICFGCTL_ACPIIE (1 << 1) -#define ADSP_PCICFGCTL_SPCBAD (1 << 7) - -#endif diff --git a/src/soc/intel/skylake/include/soc/chipset_fsp_util.h b/src/soc/intel/skylake/include/soc/chipset_fsp_util.h new file mode 100644 index 0000000..2c05f01 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/chipset_fsp_util.h @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#ifndef _CHIPSET_FSP_UTIL_H_ +#define _CHIPSET_FSP_UTIL_H_ + +/* + * Include the FSP binary interface files + * + * These files include the necessary UEFI constants and data structures + * that are used to interface to the FSP binary. + */ + +#include <uefi_types.h> /* UEFI data types */ +#include <IntelFspPkg/Include/FspApi.h> /* FSP API definitions */ +#include <IntelFspPkg/Include/FspInfoHeader.h> /* FSP binary layout */ +#include <MdePkg/Include/Pi/PiBootMode.h> /* UEFI boot mode definitions */ +#include <MdePkg/Include/Pi/PiFirmwareFile.h> /* UEFI file definitions */ +#include <MdePkg/Include/Pi/PiFirmwareVolume.h> /* UEFI file system defs */ +#include <MdePkg/Include/Uefi/UefiMultiPhase.h> /* UEFI memory types */ +#include <MdePkg/Include/Pi/PiHob.h> /* Hand off block definitions */ +#include <MdePkg/Include/Library/HobLib.h> /* HOB routine declarations */ +#include <FspUpdVpd.h> /* Vital/updatable product data definitions */ + +#endif /* _CHIPSET_FSP_UTIL_H_ */ diff --git a/src/soc/intel/skylake/include/soc/cpu.h b/src/soc/intel/skylake/include/soc/cpu.h index 312532d..c62b308 100644 --- a/src/soc/intel/skylake/include/soc/cpu.h +++ b/src/soc/intel/skylake/include/soc/cpu.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,29 +15,21 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_CPU_H_ -#define _BROADWELL_CPU_H_ +#ifndef _SOC_CPU_H_ +#define _SOC_CPU_H_ #include <arch/cpu.h> #include <device/device.h> /* CPU types */ -#define HASWELL_FAMILY_ULT 0x40650 -#define BROADWELL_FAMILY_ULT 0x306d0 +#define SKYLAKE_FAMILY_ULT 0x406e0 /* Supported CPUIDs */ -#define CPUID_HASWELL_A0 0x306c1 -#define CPUID_HASWELL_B0 0x306c2 -#define CPUID_HASWELL_C0 0x306c3 -#define CPUID_HASWELL_ULT_B0 0x40650 -#define CPUID_HASWELL_ULT 0x40651 -#define CPUID_HASWELL_HALO 0x40661 -#define CPUID_BROADWELL_C0 0x306d2 -#define CPUID_BROADWELL_D0 0x306d3 -#define CPUID_BROADWELL_E0 0x306d4 +#define CPUID_SKYLAKE_C0 0x406e2 +#define CPUID_SKYLAKE_D0 0x406e3 /* CPU bus clock is fixed at 100MHz */ #define CPU_BCLK 100 @@ -53,7 +46,7 @@ (((1 << ((base)*5)) * (limit)) / 1000) #define C_STATE_LATENCY_FROM_LAT_REG(reg) \ C_STATE_LATENCY_MICRO_SECONDS(C_STATE_LATENCY_CONTROL_ ##reg## _LIMIT, \ - (IRTL_1024_NS >> 10)) + (IRTL_1024_NS >> 10)) /* Configure power limits for turbo mode */ void set_power_limits(u8 power_limit_1_time); diff --git a/src/soc/intel/skylake/include/soc/device_nvs.h b/src/soc/intel/skylake/include/soc/device_nvs.h index 7dab40d..822c976 100644 --- a/src/soc/intel/skylake/include/soc/device_nvs.h +++ b/src/soc/intel/skylake/include/soc/device_nvs.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,31 +15,33 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_DEVICE_NVS_H_ -#define _BROADWELL_DEVICE_NVS_H_ +#ifndef _SOC_DEVICE_NVS_H_ +#define _SOC_DEVICE_NVS_H_ #include <stdint.h> /* Offset in Global NVS where this structure lives */ #define DEVICE_NVS_OFFSET 0x1000 -#define SIO_NVS_DMA 0 -#define SIO_NVS_I2C0 1 -#define SIO_NVS_I2C1 2 -#define SIO_NVS_SPI0 3 -#define SIO_NVS_SPI1 4 -#define SIO_NVS_UART0 5 -#define SIO_NVS_UART1 6 -#define SIO_NVS_SDIO 7 -#define SIO_NVS_ADSP 8 +#define SIO_NVS_I2C0 0 +#define SIO_NVS_I2C1 1 +#define SIO_NVS_I2C2 2 +#define SIO_NVS_I2C3 3 +#define SIO_NVS_I2C4 4 +#define SIO_NVS_I2C5 5 +#define SIO_NVS_SPI0 6 +#define SIO_NVS_SPI1 7 +#define SIO_NVS_UART0 8 +#define SIO_NVS_UART1 9 +#define SIO_NVS_UART2 10 typedef struct { - u8 enable[9]; - u32 bar0[9]; - u32 bar1[9]; + u8 enable[11]; + u32 bar0[11]; + u32 bar1[11]; } __attribute__((packed)) device_nvs_t; #endif diff --git a/src/soc/intel/skylake/include/soc/ehci.h b/src/soc/intel/skylake/include/soc/ehci.h deleted file mode 100644 index 44d51ef..0000000 --- a/src/soc/intel/skylake/include/soc/ehci.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _BROADWELL_EHCI_H_ -#define _BROADWELL_EHCI_H_ - -/* EHCI Memory Registers */ -#define EHCI_USB_CMD 0x20 -#define EHCI_USB_CMD_RUN (1 << 0) -#define EHCI_USB_CMD_PSE (1 << 4) -#define EHCI_USB_CMD_ASE (1 << 5) -#define EHCI_PORTSC(port) (0x64 + (port * 4)) -#define EHCI_PORTSC_ENABLED (1 << 2) -#define EHCI_PORTSC_SUSPEND (1 << 7) - -#endif diff --git a/src/soc/intel/skylake/include/soc/gpio.h b/src/soc/intel/skylake/include/soc/gpio.h index a035975..efc666f 100644 --- a/src/soc/intel/skylake/include/soc/gpio.h +++ b/src/soc/intel/skylake/include/soc/gpio.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,11 +15,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_GPIO_H_ -#define _BROADWELL_GPIO_H_ +#ifndef _SOC_GPIO_H_ +#define _SOC_GPIO_H_ #include <stdint.h> @@ -39,11 +40,115 @@ #define GPIO_CONFIG0(gpio) (0x100 + ((gpio) * 8)) #define GPIO_CONFIG1(gpio) (0x104 + ((gpio) * 8)) -#define MAX_GPIO_NUMBER 94 /* zero based */ +/* + * GPP_Ax to GPP_Gx; + * where x=24 [between GPIO Community A to F] + * = 7 [only for GPIO Community G] + */ +#define MAX_GPIO_NUMBER 151 /* zero based */ #define GPIO_LIST_END 0xffffffff -/* conf0 */ +/* + * Skylake LP GPIO PIN to Pad Mapping + */ +#define GPIO_LP_GROUP_A 0x0 +#define GPIO_LP_GROUP_B 0x1 +#define GPIO_LP_GROUP_C 0x2 +#define GPIO_LP_GROUP_D 0x3 +#define GPIO_LP_GROUP_E 0x4 +#define GPIO_LP_GROUP_F 0x5 +#define GPIO_LP_GROUP_G 0x6 + +#define GPIO_LP_GROUP_GPP_A 0x0200 +#define GPIO_LP_GROUP_GPP_B 0x0201 +#define GPIO_LP_GROUP_GPP_C 0x0202 +#define GPIO_LP_GROUP_GPP_D 0x0203 +#define GPIO_LP_GROUP_GPP_E 0x0204 +#define GPIO_LP_GROUP_GPP_F 0x0205 +#define GPIO_LP_GROUP_GPP_G 0x0206 + +#define GPIO_GROUP_SHIFT 16 +#define MAX_GPIO_PIN_PER_GROUP 24 + +/* GPIO TX STATE */ +#define B_PCH_GPIO_TX_STATE 0x0001 +#define N_PCH_GPIO_TX_STATE 0 + +/* Interrupt number */ +#define B_PCH_GPIO_INTSEL 0x7F +#define N_PCH_GPIO_INTSEL 0 + +/* Structure for storing information about registers offset, community, + * maximal pad number, smi status and smi enable for available groups + */ +typedef struct { + u32 community; + u32 padcfgoffset; + u32 padpergroup; + u32 smistsoffset; + u32 smienoffset; +} GPIO_GROUP_INFO; + +/* + * GPIO Community 0 Registers are for GPP_A and GPP_B groups + */ +#define R_PCH_PCR_GPIO_GPP_A_PADCFG_OFFSET 0x400 +#define R_PCH_PCR_GPIO_GPP_B_PADCFG_OFFSET 0x4C0 +#define R_PCH_PCR_GPIO_GPP_A_SMI_STS 0x0180 +#define R_PCH_PCR_GPIO_GPP_B_SMI_STS 0x0184 +#define R_PCH_PCR_GPIO_GPP_A_SMI_EN 0x01A0 +#define R_PCH_PCR_GPIO_GPP_B_SMI_EN 0x01A4 + +/* + * GPIO Community 1 Registers are for GPP_C, GPP_D, GPP_E groups + */ +#define R_PCH_PCR_GPIO_GPP_C_PADCFG_OFFSET 0x400 +#define R_PCH_PCR_GPIO_GPP_D_PADCFG_OFFSET 0x4C0 +#define R_PCH_PCR_GPIO_GPP_E_PADCFG_OFFSET 0x580 +#define R_PCH_PCR_GPIO_GPP_C_SMI_STS 0x0180 +#define R_PCH_PCR_GPIO_GPP_D_SMI_STS 0x0184 +#define R_PCH_PCR_GPIO_GPP_E_SMI_STS 0x0188 +#define R_PCH_PCR_GPIO_GPP_C_SMI_EN 0x01A0 +#define R_PCH_PCR_GPIO_GPP_D_SMI_EN 0x01A4 +#define R_PCH_PCR_GPIO_GPP_E_SMI_EN 0x01A8 + +/* + * GPIO Community 3 Registers are for GPP_F and GPP_G groups + */ +#define R_PCH_PCR_GPIO_GPP_F_PADCFG_OFFSET 0x400 +#define R_PCH_PCR_GPIO_GPP_G_PADCFG_OFFSET 0x4C0 +/* + * GPIO Community 2 Registers are for GPP_DSW + */ +#define R_PCH_PCR_GPIO_GPD_PADCFG_OFFSET 0x400 + +#define READ 0 +#define WRITE 1 + +/* If in GPIO_GROUP_INFO structure certain register doesn't exist + * it will have value equal to NO_REGISTER_PROPERTY + */ +#define NO_REGISTER_PROPERTY (~0u) + +#define V_PCH_GPIO_GPP_A_PAD_MAX 24 +#define V_PCH_GPIO_GPP_B_PAD_MAX 24 +#define V_PCH_GPIO_GPP_C_PAD_MAX 24 +#define V_PCH_GPIO_GPP_D_PAD_MAX 24 +#define V_PCH_GPIO_GPP_E_PAD_MAX 24 +#define V_PCH_GPIO_GPP_F_PAD_MAX 24 +#define V_PCH_GPIO_GPP_G_PAD_MAX 8 +#define V_PCH_GPIO_GPD_PAD_MAX 12 + +/* SOC has 8 GPIO communities GPP A~G, GPD */ +#define GPIO_COMMUNITY_MAX 8 + +#define GPIO_GET_GROUP_INDEX(group) (group & 0xFF) +#define GPIO_GET_GROUP_INDEX_FROM_PAD(pad) (\ + GPIO_GET_GROUP_INDEX((pad >> 16))) +#define GPIO_GET_PAD_NUMBER(pad) (pad & 0xFFFF) + +/* conf0 */ #define GPIO_MODE_NATIVE (0 << 0) #define GPIO_MODE_GPIO (1 << 0) @@ -66,7 +171,6 @@ #define GPO_LEVEL_HIGH (GPIO_OUT_HIGH << GPO_LEVEL_SHIFT) /* conf1 */ - #define GPIO_PULL_NONE (0 << 0) #define GPIO_PULL_DOWN (1 << 0) #define GPIO_PULL_UP (2 << 0) @@ -75,27 +179,22 @@ #define GPIO_SENSE_DISABLE (1 << 2) /* owner */ - #define GPIO_OWNER_ACPI 0 #define GPIO_OWNER_GPIO 1 /* route */ - #define GPIO_ROUTE_SCI 0 #define GPIO_ROUTE_SMI 1 /* irqen */ - #define GPIO_IRQ_DISABLE 0 #define GPIO_IRQ_ENABLE 1 /* blink */ - #define GPO_NO_BLINK 0 #define GPO_BLINK 1 /* reset */ - #define GPIO_RESET_PWROK 0 #define GPIO_RESET_RSMRST 1 @@ -170,23 +269,388 @@ struct gpio_config { u8 pirq; } __attribute__ ((packed)); -/* Configure GPIOs with mainboard provided settings */ -void init_one_gpio(int gpio_num, struct gpio_config *config); -void init_gpios(const struct gpio_config config[]); -/* Get GPIO pin value */ -int get_gpio(int gpio_num); +/* For any GpioPad usage in code use GPIO_PAD type*/ +typedef u32 GPIO_PAD; + +/* For any GpioGroup usage in code use GPIO_GROUP type */ +typedef u32 GPIO_GROUP; + +/* + * GPIO configuration structure used for pin programming. + * Structure contains fields that can be used to configure pad. + */ +typedef struct { + /* + Pad Mode + Pad can be set as GPIO or one of its native functions. + When in native mode setting Direction, OutputState, Interrupt is unnecessary. + Refer to definition of GPIO_PAD_MODE. + Refer to EDS for each native mode according to the pad. + */ + u32 PadMode : 4; + /* + Host Software Pad Ownership + Set pad to ACPI mode or GPIO Driver Mode. + Refer to definition of GPIO_HOSTSW_OWN. + */ + u32 HostSoftPadOwn : 2; + /* + GPIO Direction + Can choose between In, In with inversion Out, both In and Out, both In with inversion and out or d + isabling both. + Refer to definition of GPIO_DIRECTION for supported settings. + */ + u32 Direction : 5; + /* + Output State + Set Pad output value. + Refer to definition of GPIO_OUTPUT_STATE for supported settings. + This setting takes place when output is enabled. + */ + u32 OutputState : 2; + /* + GPIO Interrupt Configuration + Set Pad to cause one of interrupts (IOxAPIC/SCI/SMI/NMI). This setting is applicable only if GPIO + A is in input mode. + If GPIO is set to cause an SCI then also Gpe is enabled for this pad. + Refer to definition of GPIO_INT_CONFIG for supported settings. + */ + u32 InterruptConfig : 8; + /* + GPIO Power Configuration. + This setting controls Pad Reset Configuration and Power Rail Type. + Refer to definition of GPIO_RESET_CONFIG for supported settings. + */ + u32 PowerConfig : 4; + /* + GPIO Electrical Configuration + This setting controls pads termination and voltage tolerance. + Refer to definition of GPIO_ELECTRICAL_CONFIG for supported settings. + */ + u32 ElectricalConfig : 7; + /* + GPIO Lock Configuration + This setting controls pads lock. + Refer to definition of GPIO_LOCK_CONFIG for supported settings. + */ + u32 LockConfig : 3; + /* + Additional GPIO configuration + Refer to definition of GPIO_OTHER_CONFIG for supported settings. + */ + u32 OtherSettings : 2; + u32 RsvdBits : 27; +} GPIO_CONFIG; + +typedef struct { + GPIO_PAD GpioPad; + GPIO_CONFIG GpioConfig; +} GPIO_INIT_CONFIG; + +typedef enum { + GpioHardwareDefault = 0x0 +} GPIO_HARDWARE_DEFAULT; + +/* GPIO Pad Mode */ +typedef enum { + GpioPadModeGpio = 0x1, + GpioPadModeNative1 = 0x3, + GpioPadModeNative2 = 0x5, + GpioPadModeNative3 = 0x7, + GpioPadModeNative4 = 0x9, +} GPIO_PAD_MODE; + +/* Host Software Pad Ownership modes */ +typedef enum { + GpioHostOwnDefault = 0x0, /* Leave ownership value unmodified */ + GpioHostOwnAcpi = 0x1, /* Set HOST ownership to ACPI */ + GpioHostOwnGpio = 0x3 /* Set HOST ownership to GPIO */ +} GPIO_HOSTSW_OWN; + +/* GPIO Direction */ +typedef enum { + GpioDirDefault = 0x0, /* Leave pad direction setting unmodified */ + GpioDirInOut = (0x1 | (0x1 << 3)), /* Set pad for both output and input */ + GpioDirInInvOut = (0x1 | (0x3 << 3)), /* Set pad for both output and input with inversion */ + GpioDirIn = (0x3 | (0x1 << 3)), /* Set pad for input only */ + GpioDirInInv = (0x3 | (0x3 << 3)), /* Set pad for input with inversion */ + GpioDirOut = 0x5, /* Set pad for output only */ + GpioDirNone = 0x7 /* Disable both output and input */ +} GPIO_DIRECTION; + +/* GPIO Output State */ +typedef enum { + GpioOutDefault = 0x0, + GpioOutLow = 0x1, + GpioOutHigh = 0x3 +} GPIO_OUTPUT_STATE; + +/* + * GPIO interrupt configuration + * This setting is applicable only if GPIO is in input mode. + * GPIO_INT_CONFIG allows to choose which interrupt is generted + * (IOxAPIC/SCI/SMI/NMI) and how it is triggered (edge or level). + * Field from GpioIntNmi to GpioIntApic can be OR'ed with GpioIntLevel to + * GpioIntBothEdgecan to describe an interrupt e.g. GpioIntApic | GpioIntLevel + * If GPIO is set to cause an SCI then also Gpe is enabled for this pad. + * Not all GPIO are capable of generating an SMI or NMI interrupt + */ +typedef enum { + GpioIntDefault = 0x0, /* Leave value of interrupt routing unmodified */ + GpioIntDis = 0x1, /* Disable IOxAPIC/SCI/SMI/NMI interrupt generation */ + GpioIntNmi = 0x3, /* Enable NMI interrupt only */ + GpioIntSmi = 0x5, /* Enable SMI interrupt only */ + GpioIntSci = 0x9, /* Enable SCI interrupt only */ + GpioIntApic = 0x11, /* Enable IOxAPIC interrupt only */ + GpioIntLevel = (0x1 << 5), /* Set interrupt as level triggered */ + GpioIntEdge = (0x3 << 5), /* Set interrupt as edge triggered */ + GpioIntLvlEdgDis = (0x5 << 5), /* Disable interrupt trigger */ + GpioIntBothEdge = (0x7 << 5) /* Set interrupt as both edge triggered */ +} GPIO_INT_CONFIG; + +/* + * GPIO Power Configuration + * GPIO_RESET_CONFIG allows to set GPIO Reset (used to reset the specified + * Pad Register fields). + */ +typedef enum { + GpioResetDefault = 0x0, /* Leave value of pad reset unmodified */ + GpioResetPwrGood = 0x1, /* Powergood reset */ + GpioResetDeep = 0x3, /* Deep GPIO Reset */ + GpioResetNormal = 0x5, /* GPIO Reset */ + GpioResetResume = 0x7 /* Resume Reset */ +} GPIO_RESET_CONFIG; + +typedef int gpio_t; + +/* Clear GPIO SMI Status */ +void clear_all_smi(void); -/* Set GPIO pin value */ -void set_gpio(int gpio_num, int value); +/* Get GPIO SMI Status */ +void get_smi_status(u32 status[GPIO_COMMUNITY_MAX]); -/* Return non-zero if gpio is set to native function. 0 otherwise. */ -int gpio_is_native(int gpio_num); +/* Enable GPIO SMI */ +void enable_all_smi(void); + +/* Enable GPIO individual Group SMI */ +void enable_gpio_groupsmi(gpio_t gpio_num, u32 mask); /* - * Get a number comprised of multiple GPIO values. gpio_num_array points to - * the array of gpio pin numbers to scan, terminated by -1. + * GPIO Electrical Configuration + * Set GPIO termination and Pad Tolerance (applicable only for some pads) + * Field from GpioTermDefault to GpioTermNative can be OR'ed with + * GpioTolerance1v8. */ -unsigned get_gpios(const int *gpio_num_array); +typedef enum { + GpioTermDefault = 0x0, /* Leave termination setting unmodified */ + GpioTermNone = 0x1, /* none */ + GpioTermWpd5K = 0x5, /* 5kOhm weak pull-down */ + GpioTermWpd20K = 0x9, /* 20kOhm weak pull-down */ + GpioTermWpu1K = 0x13, /* 1kOhm weak pull-up */ + GpioTermWpu2K = 0x17, /* 2kOhm weak pull-up */ + GpioTermWpu5K = 0x15, /* 5kOhm weak pull-up */ + GpioTermWpu20K = 0x19, /* 20kOhm weak pull-up */ + GpioTermWpu1K2K = 0x1B, /* 1kOhm & 2kOhm weak pull-up */ + GpioTermNative = 0x1F, /* Native function for pads termination */ + GpioNoTolerance1v8 = (0x1 << 5), /* Disable 1.8V pad tolerance */ + GpioTolerance1v8 = (0x3 << 5) /* Enable 1.8V pad tolerance */ +} GPIO_ELECTRICAL_CONFIG; +/* + * GPIO LockConfiguration + * Set GPIO configuration lock and output state lock + * GpioLockPadConfig and GpioLockOutputState can be OR'ed + */ +typedef enum { + GpioLockDefault = 0x0, /* Leave lock setting unmodified */ + GpioPadConfigLock = 0x3, /* Lock Pad Configuration */ + GpioOutputStateLock = 0x5 /* Lock GPIO pad output value */ +} GPIO_LOCK_CONFIG; + +/* + * Other GPIO Configuration GPIO_OTHER_CONFIG is used for less often + * settings and for future extensions Supported settings: + * - RX raw override to '1' - allows to override input value to '1' + * This is applicable only if in input mode (both in GPIO and native usage) + * The override takes place at the internal pad state directly from buffer + * and before the RXINV. + */ +typedef enum { + GpioRxRaw1Default = 0x0, /* Use default input override value */ + GpioRxRaw1Dis = 0x1, /* Don't override input */ + GpioRxRaw1En = 0x3 /* Override input to '1' */ +} GPIO_OTHER_CONFIG; + +/* + * LP GPIO pins: Use below for functions from PCH GPIO Lib which + * require GpioPad as argument. Encoding used here + * has all information required by library functions + */ +#define GPIO_LP_GPP_A0 0x02000000 +#define GPIO_LP_GPP_A1 0x02000001 +#define GPIO_LP_GPP_A2 0x02000002 +#define GPIO_LP_GPP_A3 0x02000003 +#define GPIO_LP_GPP_A4 0x02000004 +#define GPIO_LP_GPP_A5 0x02000005 +#define GPIO_LP_GPP_A6 0x02000006 +#define GPIO_LP_GPP_A7 0x02000007 +#define GPIO_LP_GPP_A8 0x02000008 +#define GPIO_LP_GPP_A9 0x02000009 +#define GPIO_LP_GPP_A10 0x0200000A +#define GPIO_LP_GPP_A11 0x0200000B +#define GPIO_LP_GPP_A12 0x0200000C +#define GPIO_LP_GPP_A13 0x0200000D +#define GPIO_LP_GPP_A14 0x0200000E +#define GPIO_LP_GPP_A15 0x0200000F +#define GPIO_LP_GPP_A16 0x02000010 +#define GPIO_LP_GPP_A17 0x02000011 +#define GPIO_LP_GPP_A18 0x02000012 +#define GPIO_LP_GPP_A19 0x02000013 +#define GPIO_LP_GPP_A20 0x02000014 +#define GPIO_LP_GPP_A21 0x02000015 +#define GPIO_LP_GPP_A22 0x02000016 +#define GPIO_LP_GPP_A23 0x02000017 +#define GPIO_LP_GPP_B0 0x02010000 +#define GPIO_LP_GPP_B1 0x02010001 +#define GPIO_LP_GPP_B2 0x02010002 +#define GPIO_LP_GPP_B3 0x02010003 +#define GPIO_LP_GPP_B4 0x02010004 +#define GPIO_LP_GPP_B5 0x02010005 +#define GPIO_LP_GPP_B6 0x02010006 +#define GPIO_LP_GPP_B7 0x02010007 +#define GPIO_LP_GPP_B8 0x02010008 +#define GPIO_LP_GPP_B9 0x02010009 +#define GPIO_LP_GPP_B10 0x0201000A +#define GPIO_LP_GPP_B11 0x0201000B +#define GPIO_LP_GPP_B12 0x0201000C +#define GPIO_LP_GPP_B13 0x0201000D +#define GPIO_LP_GPP_B14 0x0201000E +#define GPIO_LP_GPP_B15 0x0201000F +#define GPIO_LP_GPP_B16 0x02010010 +#define GPIO_LP_GPP_B17 0x02010011 +#define GPIO_LP_GPP_B18 0x02010012 +#define GPIO_LP_GPP_B19 0x02010013 +#define GPIO_LP_GPP_B20 0x02010014 +#define GPIO_LP_GPP_B21 0x02010015 +#define GPIO_LP_GPP_B22 0x02010016 +#define GPIO_LP_GPP_B23 0x02010017 +#define GPIO_LP_GPP_C0 0x02020000 +#define GPIO_LP_GPP_C1 0x02020001 +#define GPIO_LP_GPP_C2 0x02020002 +#define GPIO_LP_GPP_C3 0x02020003 +#define GPIO_LP_GPP_C4 0x02020004 +#define GPIO_LP_GPP_C5 0x02020005 +#define GPIO_LP_GPP_C6 0x02020006 +#define GPIO_LP_GPP_C7 0x02020007 +#define GPIO_LP_GPP_C8 0x02020008 +#define GPIO_LP_GPP_C9 0x02020009 +#define GPIO_LP_GPP_C10 0x0202000A +#define GPIO_LP_GPP_C11 0x0202000B +#define GPIO_LP_GPP_C12 0x0202000C +#define GPIO_LP_GPP_C13 0x0202000D +#define GPIO_LP_GPP_C14 0x0202000E +#define GPIO_LP_GPP_C15 0x0202000F +#define GPIO_LP_GPP_C16 0x02020010 +#define GPIO_LP_GPP_C17 0x02020011 +#define GPIO_LP_GPP_C18 0x02020012 +#define GPIO_LP_GPP_C19 0x02020013 +#define GPIO_LP_GPP_C20 0x02020014 +#define GPIO_LP_GPP_C21 0x02020015 +#define GPIO_LP_GPP_C22 0x02020016 +#define GPIO_LP_GPP_C23 0x02020017 +#define GPIO_LP_GPP_D0 0x02030000 +#define GPIO_LP_GPP_D1 0x02030001 +#define GPIO_LP_GPP_D2 0x02030002 +#define GPIO_LP_GPP_D3 0x02030003 +#define GPIO_LP_GPP_D4 0x02030004 +#define GPIO_LP_GPP_D5 0x02030005 +#define GPIO_LP_GPP_D6 0x02030006 +#define GPIO_LP_GPP_D7 0x02030007 +#define GPIO_LP_GPP_D8 0x02030008 +#define GPIO_LP_GPP_D9 0x02030009 +#define GPIO_LP_GPP_D10 0x0203000A +#define GPIO_LP_GPP_D11 0x0203000B +#define GPIO_LP_GPP_D12 0x0203000C +#define GPIO_LP_GPP_D13 0x0203000D +#define GPIO_LP_GPP_D14 0x0203000E +#define GPIO_LP_GPP_D15 0x0203000F +#define GPIO_LP_GPP_D16 0x02030010 +#define GPIO_LP_GPP_D17 0x02030011 +#define GPIO_LP_GPP_D18 0x02030012 +#define GPIO_LP_GPP_D19 0x02030013 +#define GPIO_LP_GPP_D20 0x02030014 +#define GPIO_LP_GPP_D21 0x02030015 +#define GPIO_LP_GPP_D22 0x02030016 +#define GPIO_LP_GPP_D23 0x02030017 +#define GPIO_LP_GPP_E0 0x02040000 +#define GPIO_LP_GPP_E1 0x02040001 +#define GPIO_LP_GPP_E2 0x02040002 +#define GPIO_LP_GPP_E3 0x02040003 +#define GPIO_LP_GPP_E4 0x02040004 +#define GPIO_LP_GPP_E5 0x02040005 +#define GPIO_LP_GPP_E6 0x02040006 +#define GPIO_LP_GPP_E7 0x02040007 +#define GPIO_LP_GPP_E8 0x02040008 +#define GPIO_LP_GPP_E9 0x02040009 +#define GPIO_LP_GPP_E10 0x0204000A +#define GPIO_LP_GPP_E11 0x0204000B +#define GPIO_LP_GPP_E12 0x0204000C +#define GPIO_LP_GPP_E13 0x0204000D +#define GPIO_LP_GPP_E14 0x0204000E +#define GPIO_LP_GPP_E15 0x0204000F +#define GPIO_LP_GPP_E16 0x02040010 +#define GPIO_LP_GPP_E17 0x02040011 +#define GPIO_LP_GPP_E18 0x02040012 +#define GPIO_LP_GPP_E19 0x02040013 +#define GPIO_LP_GPP_E20 0x02040014 +#define GPIO_LP_GPP_E21 0x02040015 +#define GPIO_LP_GPP_E22 0x02040016 +#define GPIO_LP_GPP_E23 0x02040017 +#define GPIO_LP_GPP_F0 0x02050000 +#define GPIO_LP_GPP_F1 0x02050001 +#define GPIO_LP_GPP_F2 0x02050002 +#define GPIO_LP_GPP_F3 0x02050003 +#define GPIO_LP_GPP_F4 0x02050004 +#define GPIO_LP_GPP_F5 0x02050005 +#define GPIO_LP_GPP_F6 0x02050006 +#define GPIO_LP_GPP_F7 0x02050007 +#define GPIO_LP_GPP_F8 0x02050008 +#define GPIO_LP_GPP_F9 0x02050009 +#define GPIO_LP_GPP_F10 0x0205000A +#define GPIO_LP_GPP_F11 0x0205000B +#define GPIO_LP_GPP_F12 0x0205000C +#define GPIO_LP_GPP_F13 0x0205000D +#define GPIO_LP_GPP_F14 0x0205000E +#define GPIO_LP_GPP_F15 0x0205000F +#define GPIO_LP_GPP_F16 0x02050010 +#define GPIO_LP_GPP_F17 0x02050011 +#define GPIO_LP_GPP_F18 0x02050012 +#define GPIO_LP_GPP_F19 0x02050013 +#define GPIO_LP_GPP_F20 0x02050014 +#define GPIO_LP_GPP_F21 0x02050015 +#define GPIO_LP_GPP_F22 0x02050016 +#define GPIO_LP_GPP_F23 0x02050017 +#define GPIO_LP_GPP_G0 0x02060000 +#define GPIO_LP_GPP_G1 0x02060001 +#define GPIO_LP_GPP_G2 0x02060002 +#define GPIO_LP_GPP_G3 0x02060003 +#define GPIO_LP_GPP_G4 0x02060004 +#define GPIO_LP_GPP_G5 0x02060005 +#define GPIO_LP_GPP_G6 0x02060006 +#define GPIO_LP_GPP_G7 0x02060007 +#define GPIO_LP_GPD0 0x02070000 +#define GPIO_LP_GPD1 0x02070001 +#define GPIO_LP_GPD2 0x02070002 +#define GPIO_LP_GPD3 0x02070003 +#define GPIO_LP_GPD4 0x02070004 +#define GPIO_LP_GPD5 0x02070005 +#define GPIO_LP_GPD6 0x02070006 +#define GPIO_LP_GPD7 0x02070007 +#define GPIO_LP_GPD8 0x02070008 +#define GPIO_LP_GPD9 0x02070009 +#define GPIO_LP_GPD10 0x0207000A +#define GPIO_LP_GPD11 0x0207000B + +#define END_OF_GPIO_TABLE 0xFFFFFFFF #endif diff --git a/src/soc/intel/skylake/include/soc/iobp.h b/src/soc/intel/skylake/include/soc/iobp.h deleted file mode 100644 index 9f17692..0000000 --- a/src/soc/intel/skylake/include/soc/iobp.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _BROADWELL_IOBP_H_ -#define _BROADWELL_IOBP_H_ - -u32 pch_iobp_read(u32 address); -void pch_iobp_write(u32 address, u32 data); -void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue); -void pch_iobp_exec(u32 addr, u16 op_dcode, u8 route_id, u32 *data, u8 *resp); - -#endif diff --git a/src/soc/intel/skylake/include/soc/iomap.h b/src/soc/intel/skylake/include/soc/iomap.h index bb98975..05c5419 100644 --- a/src/soc/intel/skylake/include/soc/iomap.h +++ b/src/soc/intel/skylake/include/soc/iomap.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,11 +15,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_IOMAP_H_ -#define _BROADWELL_IOMAP_H_ +#ifndef _SOC_IOMAP_H_ +#define _SOC_IOMAP_H_ #define MCFG_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS #define MCFG_BASE_SIZE 0x4000000 @@ -38,12 +39,16 @@ #define GDXC_BASE_ADDRESS 0xfed84000 #define GDXC_BASE_SIZE 0x1000 +/* TODO: need to remove RCBA code after ASL clean up */ #define RCBA_BASE_ADDRESS 0xfed1c000 #define RCBA_BASE_SIZE 0x4000 #define HPET_BASE_ADDRESS 0xfed00000 -#define ACPI_BASE_ADDRESS 0x1000 +#define PCH_PWRM_BASE_ADDRESS 0xfe000000 +#define PCH_PWRM_BASE_SIZE 0x10000 + +#define ACPI_BASE_ADDRESS 0x1800 #define ACPI_BASE_SIZE 0x100 #define GPIO_BASE_ADDRESS 0x1400 @@ -55,7 +60,6 @@ /* Temporary addresses used in romstage */ #define EARLY_GTT_BAR 0xe0000000 #define EARLY_XHCI_BAR 0xd7000000 -#define EARLY_EHCI_BAR CONFIG_EHCI_BAR #define EARLY_UART_BAR CONFIG_TTYS0_BASE #define EARLY_TEMP_MMIO 0xfed08000 diff --git a/src/soc/intel/skylake/include/soc/irq.h b/src/soc/intel/skylake/include/soc/irq.h new file mode 100644 index 0000000..7f3fd65 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/irq.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_IRQ_H_ +#define _SOC_IRQ_H_ + +#define LPSS_I2C0_IRQ 16 +#define LPSS_I2C1_IRQ 17 +#define LPSS_I2C2_IRQ 18 +#define LPSS_I2C3_IRQ 19 +#define LPSS_I2C4_IRQ 34 +#define LPSS_I2C5_IRQ 33 +#define LPSS_SPI0_IRQ 22 +#define LPSS_SPI1_IRQ 23 +#define LPSS_UART0_IRQ 20 +#define LPSS_UART1_IRQ 21 +#define LPSS_UART2_IRQ 32 +#define SDIO_IRQ 22 + +#endif /* _SOC_IRQ_H_ */ diff --git a/src/soc/intel/skylake/include/soc/lpc.h b/src/soc/intel/skylake/include/soc/lpc.h index 180e527..4e826d7 100644 --- a/src/soc/intel/skylake/include/soc/lpc.h +++ b/src/soc/intel/skylake/include/soc/lpc.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,16 +15,15 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_LPC_H_ -#define _BROADWELL_LPC_H_ +#ifndef _SOC_LPC_H_ +#define _SOC_LPC_H_ /* PCI Configuration Space (D31:F0): LPC */ -#define SERIRQ_CNTL 0x64 -#define PMBASE 0x40 -#define ACPI_CNTL 0x44 +#define ABASE 0x40 +#define ACNTL 0x44 #define ACPI_EN (1 << 7) #define SCI_IRQ_SEL (7 << 0) #define SCIS_IRQ9 0 @@ -33,23 +33,10 @@ #define SCIS_IRQ21 5 #define SCIS_IRQ22 6 #define SCIS_IRQ23 7 -#define GPIOBASE 0x48 -#define BIOS_CNTL 0xdc -#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */ -#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */ -#define GPIO_EN (1 << 4) -#define GPIO_ROUT 0xb8 - -#define PIRQA_ROUT 0x60 -#define PIRQB_ROUT 0x61 -#define PIRQC_ROUT 0x62 -#define PIRQD_ROUT 0x63 -#define PIRQE_ROUT 0x68 -#define PIRQF_ROUT 0x69 -#define PIRQG_ROUT 0x6A -#define PIRQH_ROUT 0x6B - +#define SERIRQ_CNTL 0x64 #define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */ +#define COMA_RANGE 0x0 /* 0x3F8 - 0x3FF COM1*/ +#define COMB_RANGE 0x1 /* 0x2F8 - 0x2FF COM2*/ #define LPC_EN 0x82 /* LPC IF Enables Register */ #define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */ #define CNF1_LPC_EN (1 << 12) /* 0x2e/0x2f */ @@ -66,28 +53,5 @@ #define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */ #define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */ #define LGMR 0x98 /* LPC Generic Memory Range */ -#define RCBA 0xf0 /* Root Complex Register Block */ - -/* Power Management */ - -#define GEN_PMCON_1 0xa0 -#define SMI_LOCK (1 << 4) -#define GEN_PMCON_2 0xa2 -#define SYSTEM_RESET_STS (1 << 4) -#define THERMTRIP_STS (1 << 3) -#define SYSPWR_FLR (1 << 1) -#define PWROK_FLR (1 << 0) -#define GEN_PMCON_3 0xa4 -#define SUS_PWR_FLR (1 << 14) -#define GEN_RST_STS (1 << 9) -#define RTC_BATTERY_DEAD (1 << 2) -#define PWR_FLR (1 << 1) -#define SLEEP_AFTER_POWER_FAIL (1 << 0) -#define GEN_PMCON_LOCK 0xa6 -#define SLP_STR_POL_LOCK (1 << 2) -#define ACPI_BASE_LOCK (1 << 1) -#define PMIR 0xac -#define PMIR_CF9LOCK (1 << 31) -#define PMIR_CF9GR (1 << 20) - +#define BIOS_CNTL 0xdc #endif diff --git a/src/soc/intel/skylake/include/soc/me.h b/src/soc/intel/skylake/include/soc/me.h deleted file mode 100644 index 3973fc8..0000000 --- a/src/soc/intel/skylake/include/soc/me.h +++ /dev/null @@ -1,507 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _BROADWELL_ME_H_ -#define _BROADWELL_ME_H_ - -#include <console/loglevel.h> - -#define ME_RETRY 100000 /* 1 second */ -#define ME_DELAY 10 /* 10 us */ - -/* - * Management Engine PCI registers - */ - -#define PCI_CPU_MEBASE_L 0x70 /* Set by MRC */ -#define PCI_CPU_MEBASE_H 0x74 /* Set by MRC */ - -#define PCI_ME_HFS 0x40 -#define ME_HFS_CWS_RESET 0 -#define ME_HFS_CWS_INIT 1 -#define ME_HFS_CWS_REC 2 -#define ME_HFS_CWS_NORMAL 5 -#define ME_HFS_CWS_WAIT 6 -#define ME_HFS_CWS_TRANS 7 -#define ME_HFS_CWS_INVALID 8 -#define ME_HFS_STATE_PREBOOT 0 -#define ME_HFS_STATE_M0_UMA 1 -#define ME_HFS_STATE_M3 4 -#define ME_HFS_STATE_M0 5 -#define ME_HFS_STATE_BRINGUP 6 -#define ME_HFS_STATE_ERROR 7 -#define ME_HFS_ERROR_NONE 0 -#define ME_HFS_ERROR_UNCAT 1 -#define ME_HFS_ERROR_IMAGE 3 -#define ME_HFS_ERROR_DEBUG 4 -#define ME_HFS_MODE_NORMAL 0 -#define ME_HFS_MODE_DEBUG 2 -#define ME_HFS_MODE_DIS 3 -#define ME_HFS_MODE_OVER_JMPR 4 -#define ME_HFS_MODE_OVER_MEI 5 -#define ME_HFS_BIOS_DRAM_ACK 1 -#define ME_HFS_ACK_NO_DID 0 -#define ME_HFS_ACK_RESET 1 -#define ME_HFS_ACK_PWR_CYCLE 2 -#define ME_HFS_ACK_S3 3 -#define ME_HFS_ACK_S4 4 -#define ME_HFS_ACK_S5 5 -#define ME_HFS_ACK_GBL_RESET 6 -#define ME_HFS_ACK_CONTINUE 7 - -struct me_hfs { - u32 working_state: 4; - u32 mfg_mode: 1; - u32 fpt_bad: 1; - u32 operation_state: 3; - u32 fw_init_complete: 1; - u32 ft_bup_ld_flr: 1; - u32 update_in_progress: 1; - u32 error_code: 4; - u32 operation_mode: 4; - u32 reserved: 4; - u32 boot_options_present: 1; - u32 ack_data: 3; - u32 bios_msg_ack: 4; -} __attribute__ ((packed)); - -#define PCI_ME_UMA 0x44 - -struct me_uma { - u32 size: 6; - u32 reserved_1: 10; - u32 valid: 1; - u32 reserved_0: 14; - u32 set_to_one: 1; -} __attribute__ ((packed)); - -#define PCI_ME_H_GS 0x4c -#define ME_INIT_DONE 1 -#define ME_INIT_STATUS_SUCCESS 0 -#define ME_INIT_STATUS_NOMEM 1 -#define ME_INIT_STATUS_ERROR 2 -#define ME_INIT_STATUS_SUCCESS_OTHER 3 /* SEE ME9 BWG */ - -#define ME_HSIO_MESSAGE (7 << 28) -#define ME_HSIO_CMD_GETHSIOVER 1 -#define ME_HSIO_CMD_CLOSE 0 - -struct me_did { - u32 uma_base: 16; - u32 reserved: 7; - u32 rapid_start: 1; - u32 status: 4; - u32 init_done: 4; -} __attribute__ ((packed)); - -/* - * Apparently the GMES register is renamed to HFS2 (or HFSTS2 according - * to ME9 BWG). Sadly the PCH EDS and the ME BWG do not match on nomenclature. - */ -#define PCI_ME_HFS2 0x48 -/* Infrastructure Progress Values */ -#define ME_HFS2_PHASE_ROM 0 -#define ME_HFS2_PHASE_BUP 1 -#define ME_HFS2_PHASE_UKERNEL 2 -#define ME_HFS2_PHASE_POLICY 3 -#define ME_HFS2_PHASE_MODULE_LOAD 4 -#define ME_HFS2_PHASE_UNKNOWN 5 -#define ME_HFS2_PHASE_HOST_COMM 6 -/* Current State - Based on Infra Progress values. */ -/* ROM State */ -#define ME_HFS2_STATE_ROM_BEGIN 0 -#define ME_HFS2_STATE_ROM_DISABLE 6 -/* BUP State */ -#define ME_HFS2_STATE_BUP_INIT 0 -#define ME_HFS2_STATE_BUP_DIS_HOST_WAKE 1 -#define ME_HFS2_STATE_BUP_FLOW_DET 4 -#define ME_HFS2_STATE_BUP_VSCC_ERR 8 -#define ME_HFS2_STATE_BUP_CHECK_STRAP 0xa -#define ME_HFS2_STATE_BUP_PWR_OK_TIMEOUT 0xb -#define ME_HFS2_STATE_BUP_MANUF_OVRD_STRAP 0xd -#define ME_HFS2_STATE_BUP_M3 0x11 -#define ME_HFS2_STATE_BUP_M0 0x12 -#define ME_HFS2_STATE_BUP_FLOW_DET_ERR 0x13 -#define ME_HFS2_STATE_BUP_M3_CLK_ERR 0x15 -#define ME_HFS2_STATE_BUP_CPU_RESET_DID_TIMEOUT_MEM_MISSING 0x17 -#define ME_HFS2_STATE_BUP_M3_KERN_LOAD 0x18 -#define ME_HFS2_STATE_BUP_T32_MISSING 0x1c -#define ME_HFS2_STATE_BUP_WAIT_DID 0x1f -#define ME_HFS2_STATE_BUP_WAIT_DID_FAIL 0x20 -#define ME_HFS2_STATE_BUP_DID_NO_FAIL 0x21 -#define ME_HFS2_STATE_BUP_ENABLE_UMA 0x22 -#define ME_HFS2_STATE_BUP_ENABLE_UMA_ERR 0x23 -#define ME_HFS2_STATE_BUP_SEND_DID_ACK 0x24 -#define ME_HFS2_STATE_BUP_SEND_DID_ACK_ERR 0x25 -#define ME_HFS2_STATE_BUP_M0_CLK 0x26 -#define ME_HFS2_STATE_BUP_M0_CLK_ERR 0x27 -#define ME_HFS2_STATE_BUP_TEMP_DIS 0x28 -#define ME_HFS2_STATE_BUP_M0_KERN_LOAD 0x32 -/* Policy Module State */ -#define ME_HFS2_STATE_POLICY_ENTRY 0 -#define ME_HFS2_STATE_POLICY_RCVD_S3 3 -#define ME_HFS2_STATE_POLICY_RCVD_S4 4 -#define ME_HFS2_STATE_POLICY_RCVD_S5 5 -#define ME_HFS2_STATE_POLICY_RCVD_UPD 6 -#define ME_HFS2_STATE_POLICY_RCVD_PCR 7 -#define ME_HFS2_STATE_POLICY_RCVD_NPCR 8 -#define ME_HFS2_STATE_POLICY_RCVD_HOST_WAKE 9 -#define ME_HFS2_STATE_POLICY_RCVD_AC_DC 0xa -#define ME_HFS2_STATE_POLICY_RCVD_DID 0xb -#define ME_HFS2_STATE_POLICY_VSCC_NOT_FOUND 0xc -#define ME_HFS2_STATE_POLICY_VSCC_INVALID 0xd -#define ME_HFS2_STATE_POLICY_FPB_ERR 0xe -#define ME_HFS2_STATE_POLICY_DESCRIPTOR_ERR 0xf -#define ME_HFS2_STATE_POLICY_VSCC_NO_MATCH 0x10 -/* Current PM Event Values */ -#define ME_HFS2_PMEVENT_CLEAN_MOFF_MX_WAKE 0 -#define ME_HFS2_PMEVENT_MOFF_MX_WAKE_ERROR 1 -#define ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET 2 -#define ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET_ERROR 3 -#define ME_HFS2_PMEVENT_CLEAN_ME_RESET 4 -#define ME_HFS2_PMEVENT_ME_RESET_EXCEPTION 5 -#define ME_HFS2_PMEVENT_PSEUDO_ME_RESET 6 -#define ME_HFS2_PMEVENT_S0MO_SXM3 7 -#define ME_HFS2_PMEVENT_SXM3_S0M0 8 -#define ME_HFS2_PMEVENT_NON_PWR_CYCLE_RESET 9 -#define ME_HFS2_PMEVENT_PWR_CYCLE_RESET_M3 0xa -#define ME_HFS2_PMEVENT_PWR_CYCLE_RESET_MOFF 0xb -#define ME_HFS2_PMEVENT_SXMX_SXMOFF 0xc - -struct me_hfs2 { - u32 bist_in_progress: 1; - u32 reserved1: 2; - u32 invoke_mebx: 1; - u32 cpu_replaced_sts: 1; - u32 mbp_rdy: 1; - u32 mfs_failure: 1; - u32 warm_reset_request: 1; - u32 cpu_replaced_valid: 1; - u32 reserved2: 4; - u32 mbp_cleared: 1; - u32 reserved3: 2; - u32 current_state: 8; - u32 current_pmevent: 4; - u32 progress_code: 4; -} __attribute__ ((packed)); - -#define PCI_ME_HFS5 0x68 - -#define PCI_ME_H_GS2 0x70 -#define PCI_ME_MBP_GIVE_UP 0x01 - -#define PCI_ME_HERES 0xbc -#define PCI_ME_EXT_SHA1 0x00 -#define PCI_ME_EXT_SHA256 0x02 -#define PCI_ME_HER(x) (0xc0+(4*(x))) - -struct me_heres { - u32 extend_reg_algorithm: 4; - u32 reserved: 26; - u32 extend_feature_present: 1; - u32 extend_reg_valid: 1; -} __attribute__ ((packed)); - -/* - * Management Engine MEI registers - */ - -#define MEI_H_CB_WW 0x00 -#define MEI_H_CSR 0x04 -#define MEI_ME_CB_RW 0x08 -#define MEI_ME_CSR_HA 0x0c - -struct mei_csr { - u32 interrupt_enable: 1; - u32 interrupt_status: 1; - u32 interrupt_generate: 1; - u32 ready: 1; - u32 reset: 1; - u32 reserved: 3; - u32 buffer_read_ptr: 8; - u32 buffer_write_ptr: 8; - u32 buffer_depth: 8; -} __attribute__ ((packed)); - -#define MEI_ADDRESS_CORE 0x01 -#define MEI_ADDRESS_AMT 0x02 -#define MEI_ADDRESS_RESERVED 0x03 -#define MEI_ADDRESS_WDT 0x04 -#define MEI_ADDRESS_MKHI 0x07 -#define MEI_ADDRESS_ICC 0x08 -#define MEI_ADDRESS_THERMAL 0x09 - -#define MEI_HOST_ADDRESS 0 - -struct mei_header { - u32 client_address: 8; - u32 host_address: 8; - u32 length: 9; - u32 reserved: 6; - u32 is_complete: 1; -} __attribute__ ((packed)); - -#define MKHI_GROUP_ID_CBM 0x00 -#define MKHI_GLOBAL_RESET 0x0b -#define MKHI_GROUP_ID_FWCAPS 0x03 -#define MKHI_FWCAPS_GET_RULE 0x02 -#define MKHI_GROUP_ID_HMRFPO 0x05 -#define MKHI_HMRFPO_LOCK 0x02 -#define MKHI_HMRFPO_LOCK_NOACK 0x05 -#define MKHI_GROUP_ID_MDES 0x08 -#define MKHI_MDES_ENABLE 0x09 -#define MKHI_GROUP_ID_GEN 0xff -#define MKHI_GET_FW_VERSION 0x02 -#define MKHI_END_OF_POST 0x0c -#define MKHI_FEATURE_OVERRIDE 0x14 -#define MKHI_END_OF_POST_NOACK 0x1a - -struct mkhi_header { - u32 group_id: 8; - u32 command: 7; - u32 is_response: 1; - u32 reserved: 8; - u32 result: 8; -} __attribute__ ((packed)); - -struct me_fw_version { - u16 code_minor; - u16 code_major; - u16 code_build_number; - u16 code_hot_fix; - u16 recovery_minor; - u16 recovery_major; - u16 recovery_build_number; - u16 recovery_hot_fix; -} __attribute__ ((packed)); - -/* ICC Messages */ -#define ICC_SET_CLOCK_ENABLES 0x3 -#define ICC_API_VERSION_LYNXPOINT 0x00030000 - -struct icc_header { - u32 api_version; - u32 icc_command; - u32 icc_status; - u32 length; - u32 reserved; -} __attribute__ ((packed)); - -struct icc_clock_enables_msg { - u32 clock_enables; - u32 clock_mask; - u32 no_response: 1; - u32 reserved: 31; -} __attribute__ ((packed)); - -#define HECI_EOP_STATUS_SUCCESS 0x0 -#define HECI_EOP_PERFORM_GLOBAL_RESET 0x1 - -#define CBM_RR_GLOBAL_RESET 0x01 - -#define GLOBAL_RESET_BIOS_MRC 0x01 -#define GLOBAL_RESET_BIOS_POST 0x02 -#define GLOBAL_RESET_MEBX 0x03 - -struct me_global_reset { - u8 request_origin; - u8 reset_type; -} __attribute__ ((packed)); - -typedef enum { - ME_NORMAL_BIOS_PATH, - ME_S3WAKE_BIOS_PATH, - ME_ERROR_BIOS_PATH, - ME_RECOVERY_BIOS_PATH, - ME_DISABLE_BIOS_PATH, - ME_FIRMWARE_UPDATE_BIOS_PATH, -} me_bios_path; - -/* - * ME to BIOS Payload Datastructures and definitions. The ordering of the - * structures follows the ordering in the ME9 BWG. - */ - -#define MBP_APPID_KERNEL 1 -#define MBP_APPID_INTEL_AT 3 -#define MBP_APPID_HWA 4 -#define MBP_APPID_ICC 5 -#define MBP_APPID_NFC 6 -/* Kernel items: */ -#define MBP_KERNEL_FW_VER_ITEM 1 -#define MBP_KERNEL_FW_CAP_ITEM 2 -#define MBP_KERNEL_ROM_BIST_ITEM 3 -#define MBP_KERNEL_PLAT_KEY_ITEM 4 -#define MBP_KERNEL_FW_TYPE_ITEM 5 -#define MBP_KERNEL_MFS_FAILURE_ITEM 6 -#define MBP_KERNEL_PLAT_TIME_ITEM 7 -/* Intel AT items: */ -#define MBP_INTEL_AT_STATE_ITEM 1 -/* ICC Items: */ -#define MBP_ICC_PROFILE_ITEM 1 -/* HWA Items: */ -#define MBP_HWA_REQUEST_ITEM 1 -/* NFC Items: */ -#define MBP_NFC_SUPPORT_DATA_ITEM 1 - -#define MBP_MAKE_IDENT(appid, item) ((appid << 8) | item) -#define MBP_IDENT(appid, item) \ - MBP_MAKE_IDENT(MBP_APPID_##appid, MBP_##appid##_##item##_ITEM) - -typedef struct { - u32 mbp_size : 8; - u32 num_entries : 8; - u32 rsvd : 16; -} __attribute__ ((packed)) mbp_header; - -typedef struct { - u32 app_id : 8; - u32 item_id : 8; - u32 length : 8; - u32 rsvd : 8; -} __attribute__ ((packed)) mbp_item_header; - -typedef struct { - u32 major_version : 16; - u32 minor_version : 16; - u32 hotfix_version : 16; - u32 build_version : 16; -} __attribute__ ((packed)) mbp_fw_version_name; - -typedef struct { - u32 full_net : 1; - u32 std_net : 1; - u32 manageability : 1; - u32 reserved_2 : 2; - u32 intel_at : 1; - u32 intel_cls : 1; - u32 reserved : 3; - u32 intel_mpc : 1; - u32 icc_over_clocking : 1; - u32 pavp : 1; - u32 reserved_1 : 4; - u32 ipv6 : 1; - u32 kvm : 1; - u32 och : 1; - u32 vlan : 1; - u32 tls : 1; - u32 reserved_4 : 1; - u32 wlan : 1; - u32 reserved_5 : 8; -} __attribute__ ((packed)) mbp_mefwcaps; - -typedef struct { - u16 device_id; - u16 fuse_test_flags; - u32 umchid[4]; -} __attribute__ ((packed)) mbp_rom_bist_data; - -typedef struct { - u32 key[8]; -} mbp_platform_key; - -typedef struct { - u32 mobile: 1; - u32 desktop: 1; - u32 server: 1; - u32 workstation: 1; - u32 corporate: 1; - u32 consumer: 1; - u32 regular_super_sku: 1; - u32 rsvd: 1; - u32 image_type: 4; - u32 brand: 4; - u32 rsvd1: 16; -} __attribute__ ((packed)) mbp_me_firmware_type; - -typedef struct { - mbp_me_firmware_type rule_data; - u8 available; -} mbp_plat_type; - -typedef struct { - u16 icc_start_address; - u16 mask; -} __attribute__ ((packed)) icc_address_mask; - -typedef struct { - u8 num_icc_profiles; - u8 icc_profile_soft_strap; - u8 icc_profile_index; - u8 reserved; - u32 icc_reg_bundles; - icc_address_mask icc_address_mask[0]; -} __attribute__ ((packed)) mbp_icc_profile; - -typedef struct { - u16 lock_state : 1; - u16 authenticate_module : 1; - u16 s3authentication : 1; - u16 flash_wear_out : 1; - u16 flash_variable_security : 1; - u16 reserved : 11; -} __attribute__ ((packed)) tdt_state_flag; - -typedef struct { - u8 state; - u8 last_theft_trigger; - tdt_state_flag flags; -} __attribute__ ((packed)) mbp_at_state; - -typedef struct { - u32 wake_event_mrst_time_ms; - u32 mrst_pltrst_time_ms; - u32 pltrst_cpurst_time_ms; -} __attribute__ ((packed)) mbp_plat_time; - -typedef struct { - u32 device_type : 2; - u32 reserved : 30; -} __attribute__ ((packed)) mbp_nfc_data; - -typedef struct { - mbp_fw_version_name *fw_version_name; - mbp_mefwcaps *fw_capabilities; - mbp_rom_bist_data *rom_bist_data; - mbp_platform_key *platform_key; - mbp_plat_type *fw_plat_type; - mbp_icc_profile *icc_profile; - mbp_at_state *at_state; - u32 *mfsintegrity; - mbp_plat_time *plat_time; - mbp_nfc_data *nfc_data; -} me_bios_payload; - -struct me_fwcaps { - u32 id; - u8 length; - mbp_mefwcaps caps_sku; - u8 reserved[3]; -} __attribute__ ((packed)); - -void intel_me_hsio_version(uint16_t *version, uint16_t *checksum); - -#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) -/* Defined in me_status.c for both romstage and ramstage */ -void intel_me_status(void); -#else -static inline void intel_me_status(void) { } -#endif - -#endif diff --git a/src/soc/intel/skylake/include/soc/msr.h b/src/soc/intel/skylake/include/soc/msr.h index 707041a..b857dbe 100644 --- a/src/soc/intel/skylake/include/soc/msr.h +++ b/src/soc/intel/skylake/include/soc/msr.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,11 +15,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_MSR_H_ -#define _BROADWELL_MSR_H_ +#ifndef _SOC_MSR_H_ +#define _SOC_MSR_H_ #define MSR_PIC_MSG_CONTROL 0x2e #define CORE_THREAD_COUNT_MSR 0x35 @@ -41,21 +42,21 @@ #define MISC_PWR_MGMT_EIST_HW_DIS (1 << 0) #define MSR_TURBO_RATIO_LIMIT 0x1ad #define MSR_TEMPERATURE_TARGET 0x1a2 -#define IA32_PERF_CTL 0x199 +#define IA32_PERF_CTL 0x199 #define IA32_THERM_INTERRUPT 0x19b #define IA32_ENERGY_PERFORMANCE_BIAS 0x1b0 #define ENERGY_POLICY_PERFORMANCE 0 #define ENERGY_POLICY_NORMAL 6 #define ENERGY_POLICY_POWERSAVE 15 #define IA32_PACKAGE_THERM_INTERRUPT 0x1b2 -#define EMRRphysBase_MSR 0x1f4 -#define EMRRphysMask_MSR 0x1f5 +#define EMRR_PHYS_BASE_MSR 0x1f4 +#define EMRR_PHYS_MASK_MSR 0x1f5 #define IA32_PLATFORM_DCA_CAP 0x1f8 #define MSR_POWER_CTL 0x1fc #define MSR_LT_LOCK_MEMORY 0x2e7 -#define UNCORE_EMRRphysBase_MSR 0x2f4 -#define UNCORE_EMRRphysMask_MSR 0x2f5 -#define IA32_MC0_STATUS 0x401 +#define UNCORE_EMRR_PHYS_BASE_MSR 0x2f4 +#define UNCORE_EMRR_PHYS_MASK_MSR 0x2f5 +#define IA32_MC0_STATUS 0x401 #define SMM_FEATURE_CONTROL_MSR 0x4e0 #define SMM_CPU_SAVE_EN (1 << 1) diff --git a/src/soc/intel/skylake/include/soc/nvs.h b/src/soc/intel/skylake/include/soc/nvs.h index 0f1e63a..2c83c5f 100644 --- a/src/soc/intel/skylake/include/soc/nvs.h +++ b/src/soc/intel/skylake/include/soc/nvs.h @@ -3,6 +3,7 @@ * * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,12 +16,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_NVS_H_ -#define _BROADWELL_NVS_H_ +#ifndef _SOC_NVS_H_ +#define _SOC_NVS_H_ +#include <rules.h> #include <vendorcode/google/chromeos/gnvs.h> #include <soc/device_nvs.h> @@ -53,7 +55,9 @@ typedef struct { u32 cbmc; /* 0x1c - 0x1f - Coreboot Memory Console */ u64 pm1i; /* 0x20 - 0x27 - PM1 wake status bit */ u64 gpei; /* 0x28 - 0x2f - GPE wake status bit */ - u8 unused[208]; + u32 rpa[12]; /* 0x30 - 0x5f - Root Port Address */ + + u8 unused[160]; /* ChromeOS specific (0x100 - 0xfff) */ chromeos_acpi_t chromeos; @@ -63,7 +67,7 @@ typedef struct { } __attribute__((packed)) global_nvs_t; void acpi_create_gnvs(global_nvs_t *gnvs); -#ifdef __SMM__ +#if ENV_SMM /* Used in SMM to find the ACPI GNVS address */ global_nvs_t *smm_get_gnvs(void); #endif diff --git a/src/soc/intel/skylake/include/soc/pch.h b/src/soc/intel/skylake/include/soc/pch.h index e677215..4b67e99 100644 --- a/src/soc/intel/skylake/include/soc/pch.h +++ b/src/soc/intel/skylake/include/soc/pch.h @@ -3,6 +3,7 @@ * * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,38 +16,27 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_PCH_H_ -#define _BROADWELL_PCH_H_ +#ifndef _SOC_PCH_H_ +#define _SOC_PCH_H_ -/* Haswell ULT Pch (LynxPoint-LP) */ -#define PCH_LPT_LP_SAMPLE 0x9c41 -#define PCH_LPT_LP_PREMIUM 0x9c43 -#define PCH_LPT_LP_MAINSTREAM 0x9c45 -#define PCH_LPT_LP_VALUE 0x9c47 +#include <device/device.h> +#include <rules.h> -/* Broadwell PCH (WildatPoint) */ -#define PCH_WPT_HSW_U_SAMPLE 0x9cc1 -#define PCH_WPT_BDW_U_SAMPLE 0x9cc2 -#define PCH_WPT_BDW_U_PREMIUM 0x9cc3 -#define PCH_WPT_BDW_U_BASE 0x9cc5 -#define PCH_WPT_BDW_Y_SAMPLE 0x9cc6 -#define PCH_WPT_BDW_Y_PREMIUM 0x9cc7 -#define PCH_WPT_BDW_Y_BASE 0x9cc9 -#define PCH_WPT_BDW_H 0x9ccb - -/* Power Management Control and Status */ -#define PCH_PCS 0x84 -#define PCH_PCS_PS_D3HOT 3 +/* PCH (SunRisePoint LP) */ +#define PCH_SPT_LP_SAMPLE 0x9d41 +#define PCH_SPT_LP_U_BASE 0x9d43 +#define PCH_SPT_LP_U_PREMIUM 0x9d48 +#define PCH_SPT_LP_Y_PREMIUM 0x9d46 u8 pch_revision(void); u16 pch_type(void); -int pch_is_wpt(void); -int pch_is_wpt_ulx(void); u32 pch_read_soft_strap(int id); void pch_log_state(void); +#if ENV_RAMSTAGE void pch_disable_devfn(device_t dev); - #endif + +#endif /* _SOC_PCH_H_ */ diff --git a/src/soc/intel/skylake/include/soc/pci_devs.h b/src/soc/intel/skylake/include/soc/pci_devs.h index 76e3a68..240bd4a 100644 --- a/src/soc/intel/skylake/include/soc/pci_devs.h +++ b/src/soc/intel/skylake/include/soc/pci_devs.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,24 +15,26 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_PCI_DEVS_H_ -#define _BROADWELL_PCI_DEVS_H_ +#ifndef _SOC_PCI_DEVS_H_ +#define _SOC_PCI_DEVS_H_ + +#include <rules.h> #define _SA_DEVFN(slot) PCI_DEVFN(SA_DEV_SLOT_ ## slot, 0) -#define _PCH_DEVFN(slot,func) PCI_DEVFN(PCH_DEV_SLOT_ ## slot, func) +#define _PCH_DEVFN(slot, func) PCI_DEVFN(PCH_DEV_SLOT_ ## slot, func) -#if defined(__PRE_RAM__) || defined(__SMM__) || defined(__ROMCC__) -#include <arch/io.h> -#define _SA_DEV(slot) PCI_DEV(0, SA_DEV_SLOT_ ## slot, 0) -#define _PCH_DEV(slot,func) PCI_DEV(0, PCH_DEV_SLOT_ ## slot, func) -#else +#if ENV_RAMSTAGE #include <device/device.h> #include <device/pci_def.h> #define _SA_DEV(slot) dev_find_slot(0, _SA_DEVFN(slot)) -#define _PCH_DEV(slot,func) dev_find_slot(0, _PCH_DEVFN(slot, func)) +#define _PCH_DEV(slot, func) dev_find_slot(0, _PCH_DEVFN(slot, func)) +#else +#include <arch/io.h> +#define _SA_DEV(slot) PCI_DEV(0, SA_DEV_SLOT_ ## slot, 0) +#define _PCH_DEV(slot, func) PCI_DEV(0, PCH_DEV_SLOT_ ## slot, func) #endif /* System Agent Devices */ @@ -44,76 +47,84 @@ #define SA_DEVFN_IGD _SA_DEVFN(IGD) #define SA_DEV_IGD _SA_DEV(IGD) -#define SA_DEV_SLOT_MINIHD 0x03 -#define SA_DEVFN_MINIHD _SA_DEVFN(MINIHD) -#define SA_DEV_MINIHD _SA_DEV(MINIHD) - /* PCH Devices */ - -#define PCH_DEV_SLOT_ADSP 0x13 -#define PCH_DEVFN_ADSP _PCH_DEVFN(ADSP, 0) -#define PCH_DEV_ADSP _PCH_DEV(ADSP, 0) - #define PCH_DEV_SLOT_XHCI 0x14 #define PCH_DEVFN_XHCI _PCH_DEVFN(XHCI, 0) +#define PCH_DEVFN_USBOTG _PCH_DEVFN(XHCI, 1) +#define PCH_DEVFN_THERMAL _PCH_DEVFN(XHCI, 2) #define PCH_DEV_XHCI _PCH_DEV(XHCI, 0) - -#define PCH_DEV_SLOT_SIO 0x15 -#define PCH_DEV_SDMA _PCH_DEV(SIO, 0) -#define PCH_DEV_I2C0 _PCH_DEV(SIO, 1) -#define PCH_DEV_I2C1 _PCH_DEV(SIO, 2) -#define PCH_DEV_SPI0 _PCH_DEV(SIO, 3) -#define PCH_DEV_SPI1 _PCH_DEV(SIO, 4) -#define PCH_DEV_UART0 _PCH_DEV(SIO, 5) -#define PCH_DEV_UART1 _PCH_DEV(SIO, 6) -#define PCH_DEVFN_SDMA _PCH_DEVFN(SIO, 0) -#define PCH_DEVFN_I2C0 _PCH_DEVFN(SIO, 1) -#define PCH_DEVFN_I2C1 _PCH_DEVFN(SIO, 2) -#define PCH_DEVFN_SPI0 _PCH_DEVFN(SIO, 3) -#define PCH_DEVFN_SPI1 _PCH_DEVFN(SIO, 4) -#define PCH_DEVFN_UART0 _PCH_DEVFN(SIO, 5) -#define PCH_DEVFN_UART1 _PCH_DEVFN(SIO, 6) +#define PCH_DEV_USBOTG _PCH_DEV(XHCI, 1) +#define PCH_DEV_THERMAL _PCH_DEV(XHCI, 2) + +#define PCH_DEV_SLOT_SIO1 0x15 +#define PCH_DEVFN_I2C0 _PCH_DEVFN(SIO1, 0) +#define PCH_DEVFN_I2C1 _PCH_DEVFN(SIO1, 1) +#define PCH_DEVFN_I2C2 _PCH_DEVFN(SIO1, 2) +#define PCH_DEVFN_I2C3 _PCH_DEVFN(SIO1, 3) +#define PCH_DEV_I2C0 _PCH_DEV(SIO1, 0) +#define PCH_DEV_I2C1 _PCH_DEV(SIO1, 1) +#define PCH_DEV_I2C2 _PCH_DEV(SIO1, 2) +#define PCH_DEV_I2C3 _PCH_DEV(SIO1, 3) #define PCH_DEV_SLOT_ME 0x16 #define PCH_DEVFN_ME _PCH_DEVFN(ME, 0) #define PCH_DEVFN_ME_2 _PCH_DEVFN(ME, 1) #define PCH_DEVFN_ME_IDER _PCH_DEVFN(ME, 2) #define PCH_DEVFN_ME_KT _PCH_DEVFN(ME, 3) +#define PCH_DEVFN_ME_3 _PCH_DEVFN(ME, 4) #define PCH_DEV_ME _PCH_DEV(ME, 0) #define PCH_DEV_ME_2 _PCH_DEV(ME, 1) #define PCH_DEV_ME_IDER _PCH_DEV(ME, 2) #define PCH_DEV_ME_KT _PCH_DEV(ME, 3) +#define PCH_DEV_ME_3 _PCH_DEV(ME, 4) -#define PCH_DEV_SLOT_SDIO 0x17 -#define PCH_DEVFN_SDIO _PCH_DEVFN(SDIO, 0) -#define PCH_DEV_SDIO _PCH_DEV(SDIO, 0) +#define PCH_DEV_SLOT_SATA 0x17 +#define PCH_DEVFN_SATA _PCH_DEVFN(SATA, 0) +#define PCH_DEV_SATA _PCH_DEV(SATA, 0) -#define PCH_DEV_SLOT_GBE 0x19 -#define PCH_DEVFN_GBE _PCH_DEVFN(GBE, 0) -#define PCH_DEV_GBE _PCH_DEV(GBE, 0) - -#define PCH_DEV_SLOT_HDA 0x1b -#define PCH_DEVFN_HDA _PCH_DEVFN(HDA, 0) -#define PCH_DEV_HDA _PCH_DEV(HDA, 0) +#define PCH_DEV_SLOT_SIO2 0x19 +#define PCH_DEVFN_UART2 _PCH_DEVFN(SIO2, 0) +#define PCH_DEVFN_I2C5 _PCH_DEVFN(SIO2, 1) +#define PCH_DEVFN_I2C4 _PCH_DEVFN(SIO2, 2) +#define PCH_DEV_UART2 _PCH_DEV(SIO2, 0) +#define PCH_DEV_I2C5 _PCH_DEV(SIO2, 1) +#define PCH_DEV_I2C4 _PCH_DEV(SIO2, 2) #define PCH_DEV_SLOT_PCIE 0x1c - -#define PCH_DEV_SLOT_EHCI 0x1d -#define PCH_DEVFN_EHCI _PCH_DEVFN(EHCI, 0) -#define PCH_DEV_EHCI _PCH_DEV(EHCI, 0) +#define PCH_DEVFN_PCIE1 _PCH_DEVFN(PCIE, 0) +#define PCH_DEVFN_PCIE2 _PCH_DEVFN(PCIE, 1) +#define PCH_DEVFN_PCIE3 _PCH_DEVFN(PCIE, 2) +#define PCH_DEVFN_PCIE4 _PCH_DEVFN(PCIE, 3) +#define PCH_DEVFN_PCIE5 _PCH_DEVFN(PCIE, 4) +#define PCH_DEVFN_PCIE6 _PCH_DEVFN(PCIE, 5) +#define PCH_DEV_PCIE1 _PCH_DEV(PCIE, 0) +#define PCH_DEV_PCIE2 _PCH_DEV(PCIE, 1) +#define PCH_DEV_PCIE3 _PCH_DEV(PCIE, 2) +#define PCH_DEV_PCIE4 _PCH_DEV(PCIE, 3) +#define PCH_DEV_PCIE5 _PCH_DEV(PCIE, 4) +#define PCH_DEV_PCIE6 _PCH_DEV(PCIE, 5) + +#define PCH_DEV_SLOT_STORAGE 0x1e +#define PCH_DEVFN_UART0 _PCH_DEVFN(STORAGE, 0) +#define PCH_DEVFN_UART1 _PCH_DEVFN(STORAGE, 1) +#define PCH_DEVFN_EMMC _PCH_DEVFN(STORAGE, 4) +#define PCH_DEVFN_SDCARD _PCH_DEVFN(STORAGE, 6) +#define PCH_DEV_UART0 _PCH_DEV(STORAGE, 0) +#define PCH_DEV_UART1 _PCH_DEV(STORAGE, 1) +#define PCH_DEV_EMMC _PCH_DEV(STORAGE, 4) +#define PCH_DEV_SDCARD _PCH_DEV(STORAGE, 6) #define PCH_DEV_SLOT_LPC 0x1f #define PCH_DEVFN_LPC _PCH_DEVFN(LPC, 0) -#define PCH_DEVFN_IDE _PCH_DEVFN(LPC, 1) -#define PCH_DEVFN_SATA _PCH_DEVFN(LPC, 2) -#define PCH_DEVFN_SMBUS _PCH_DEVFN(LPC, 3) -#define PCH_DEVFN_SATA2 _PCH_DEVFN(LPC, 5) -#define PCH_DEVFN_THERMAL _PCH_DEVFN(LPC, 6) +#define PCH_DEVFN_PMC _PCH_DEVFN(LPC, 2) +#define PCH_DEVFN_HDA _PCH_DEVFN(LPC, 3) +#define PCH_DEVFN_SMBUS _PCH_DEVFN(LPC, 4) +#define PCH_DEVFN_SPI _PCH_DEVFN(LPC, 5) +#define PCH_DEVFN_GBE _PCH_DEVFN(LPC, 6) #define PCH_DEV_LPC _PCH_DEV(LPC, 0) -#define PCH_DEV_IDE _PCH_DEV(LPC, 1) -#define PCH_DEV_SATA _PCH_DEV(LPC, 2) -#define PCH_DEV_SMBUS _PCH_DEV(LPC, 3) -#define PCH_DEV_SATA2 _PCH_DEV(LPC, 5) -#define PCH_DEV_THERMAL _PCH_DEV(LPC, 6) - +#define PCH_DEV_PMC _PCH_DEV(LPC, 2) +#define PCH_DEV_HDA _PCH_DEV(LPC, 3) +#define PCH_DEV_SMBUS _PCH_DEV(LPC, 4) +#define PCH_DEV_SPI _PCH_DEV(LPC, 5) +#define PCH_DEV_GBE _PCH_DEV(LPC, 6) #endif diff --git a/src/soc/intel/skylake/include/soc/pcr.h b/src/soc/intel/skylake/include/soc/pcr.h new file mode 100644 index 0000000..9ac9edd --- /dev/null +++ b/src/soc/intel/skylake/include/soc/pcr.h @@ -0,0 +1,104 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_PCR_H_ +#define _SOC_PCR_H_ + +/* PCH (SunRisePoint LP) */ +#define PCH_PCR_BASE_ADDRESS 0xFD000000 +#define R_PCH_PCR_LPC_GCFD 0x3418 + +/* DMI Control Register */ +#define R_PCH_PCR_DMI_DMIC 0x2234 +#define B_PCH_PCR_DMI_DMIC_SRL (1 << 31) +#define R_PCH_PCR_DMI_LPCLGIR1 0x2730 +#define R_PCH_PCR_DMI_LPCLGIR2 0x2734 +#define R_PCH_PCR_DMI_LPCLGIR3 0x2738 +#define R_PCH_PCR_DMI_LPCLGIR4 0x273c +#define R_PCH_PCR_DMI_LPCIOD 0x2770 +#define R_PCH_PCR_DMI_LPCIOE 0x2774 + +/* RTC configuration */ +#define R_PCH_PCR_RTC_CONF 0x3400 +#define B_PCH_PCR_RTC_CONF_UCMOS_EN 0x4 + +/* ITSS PCRs*/ +/* PIRQA Routing Control Register*/ +#define R_PCH_PCR_ITSS_PIRQA_ROUT 0x3100 +/* PIRQB Routing Control Register*/ +#define R_PCH_PCR_ITSS_PIRQB_ROUT 0x3101 +/* PIRQC Routing Control Register*/ +#define R_PCH_PCR_ITSS_PIRQC_ROUT 0x3102 +/* PIRQD Routing Control Register*/ +#define R_PCH_PCR_ITSS_PIRQD_ROUT 0x3103 +/* PIRQE Routing Control Register*/ +#define R_PCH_PCR_ITSS_PIRQE_ROUT 0x3104 +/* PIRQF Routing Control Register*/ +#define R_PCH_PCR_ITSS_PIRQF_ROUT 0x3105 +/* PIRQG Routing Control Register*/ +#define R_PCH_PCR_ITSS_PIRQG_ROUT 0x3106 +/* PIRQH Routing Control Register*/ +#define R_PCH_PCR_ITSS_PIRQH_ROUT 0x3107 + +/* IO Trap PCRs */ +/* Trap status Register */ +#define R_PCH_PCR_PSTH_TRPST 0x1E00 +/* Trapped cycle */ +#define R_PCH_PCR_PSTH_TRPC 0x1E10 +/* Trapped write data */ +#define R_PCH_PCR_PSTH_TRPD 0x1E18 + +/* Serial IO UART controller legacy mode */ +#define R_PCH_PCR_SERIAL_IO_GPPRVRW7 0x618 +#define SIO_PCH_LEGACY_UART0 (1 << 0) +#define SIO_PCH_LEGACY_UART1 (1 << 1) +#define SIO_PCH_LEGACY_UART2 (1 << 2) + +/* + * Definition for PCR address + * The PCR address is used to the PCR MMIO programming + */ +#define PCH_PCR_ADDRESS(pid, offset) (void *)(\ + PCH_PCR_BASE_ADDRESS | ((u8)(pid) << 16) | (u16)(offset)) + +/* + * Definition for SBI PID + * The PCH_SBI_PID defines the PID for PCR MMIO programming and + * PCH SBI programming as well. + */ +typedef enum { + PID_PSTH = 0x89, + PID_GPIOCOM3 = 0xAC, + PID_GPIOCOM2 = 0xAD, + PID_GPIOCOM1 = 0xAE, + PID_GPIOCOM0 = 0xAF, + PID_LPC = 0xC7, + PID_ITSS = 0xC4, + PID_RTC = 0xC3, + PID_SERIALIO = 0xCB, + PID_DMI = 0xEF, +} PCH_SBI_PID; + +u8 pcr_read32(PCH_SBI_PID pid, u16 offset, u32 *outdata); +u8 pcr_read16(PCH_SBI_PID pid, u16 offset, u16 *outdata); +u8 pcr_read8(PCH_SBI_PID pid, u16 offset, u8 *outdata); +u8 pcr_write32(PCH_SBI_PID pid, u16 offset, u32 indata); +u8 pcr_write16(PCH_SBI_PID pid, u16 offset, u16 indata); +u8 pcr_write8(PCH_SBI_PID pid, u16 offset, u8 indata); +u8 pcr_andthenor32(PCH_SBI_PID pid, u16 offset, u32 anddata, u32 ordata); +u8 pcr_andthenor16(PCH_SBI_PID pid, u16 offset, u16 anddata, u16 ordata); +u8 pcr_andthenor8(PCH_SBI_PID pid, u16 offset, u8 anddata, u8 ordata); + +#endif /* _SOC_PCR_H_ */ diff --git a/src/soc/intel/skylake/include/soc/pei_data.h b/src/soc/intel/skylake/include/soc/pei_data.h index e614718..2328436 100644 --- a/src/soc/intel/skylake/include/soc/pei_data.h +++ b/src/soc/intel/skylake/include/soc/pei_data.h @@ -1,7 +1,8 @@ /* - * Broadwell UEFI PEI wrapper + * UEFI PEI wrapper * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -26,17 +27,16 @@ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#ifndef PEI_DATA_H -#define PEI_DATA_H +#ifndef _PEI_DATA_H_ +#define _PEI_DATA_H_ #include <types.h> -#include <memory_info.h> #define PEI_VERSION 22 #define ABI_X86 __attribute__((regparm(0))) -typedef void ABI_X86 (*tx_byte_func)(unsigned char byte); +typedef void ABI_X86(*tx_byte_func)(unsigned char byte); enum board_type { BOARD_TYPE_CRB_MOBILE = 0, /* CRB Mobile */ @@ -86,24 +86,19 @@ struct usb3_port_setting { uint8_t fixed_eq; } __attribute__((packed)); -struct pei_data -{ +struct pei_data { uint32_t pei_version; enum board_type board_type; int boot_mode; int ec_present; - int usbdebug; /* Base addresses */ uint32_t pciexbar; uint16_t smbusbar; uint32_t xhcibar; - uint32_t ehcibar; uint32_t gttbar; - uint32_t rcba; uint32_t pmbase; - uint32_t gpiobase; uint32_t temp_mmio_base; uint32_t tseg_size; @@ -173,14 +168,15 @@ struct pei_data * DQByteMap[5] - CmdVDQByteMap: Always program to [0xFF, 0] * since we have 1 CA Vref */ - uint8_t dq_map[2][6][2]; + uint8_t dq_map[2][12]; /* * LPDDR3 Map from CPU DQS pins to SDRAM DQS pins * [CHANNEL][MAX_BYTES] */ uint8_t dqs_map[2][8]; - + uint16_t RcompResistor[3]; + uint16_t RcompTarget[5]; /* Data read from flash and passed into MRC */ const void *saved_data; int saved_data_size; @@ -191,9 +187,8 @@ struct pei_data /* Data from MRC that should be saved to flash */ void *data_to_save; int data_to_save_size; - struct memory_info meminfo; } __attribute__((packed)); typedef struct pei_data PEI_DATA; -#endif +#endif /* _PEI_DATA_H_ */ diff --git a/src/soc/intel/skylake/include/soc/pei_wrapper.h b/src/soc/intel/skylake/include/soc/pei_wrapper.h index 3ade4ff..7d37c10 100644 --- a/src/soc/intel/skylake/include/soc/pei_wrapper.h +++ b/src/soc/intel/skylake/include/soc/pei_wrapper.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,15 +15,15 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_PEI_WRAPPER_H_ -#define _BROADWELL_PEI_WRAPPER_H_ +#ifndef _SOC_PEI_WRAPPER_H_ +#define _SOC_PEI_WRAPPER_H_ #include <soc/pei_data.h> -typedef int ABI_X86 (*pei_wrapper_entry_t)(struct pei_data *pei_data); +typedef int ABI_X86(*pei_wrapper_entry_t)(struct pei_data *pei_data); static inline void pei_data_usb2_port(struct pei_data *pei_data, int port, uint16_t length, uint8_t enable, @@ -43,7 +44,7 @@ static inline void pei_data_usb3_port(struct pei_data *pei_data, int port, pei_data->usb3_ports[port].fixed_eq = fixed_eq; } -void broadwell_fill_pei_data(struct pei_data *pei_data); +void soc_fill_pei_data(struct pei_data *pei_data); void mainboard_fill_pei_data(struct pei_data *pei_data); #endif diff --git a/src/soc/intel/skylake/include/soc/pm.h b/src/soc/intel/skylake/include/soc/pm.h index 54fc4a7..3be83f4 100644 --- a/src/soc/intel/skylake/include/soc/pm.h +++ b/src/soc/intel/skylake/include/soc/pm.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,11 +15,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_PM_H_ -#define _BROADWELL_PM_H_ +#ifndef _SOC_PM_H_ +#define _SOC_PM_H_ /* ACPI_BASE_ADDRESS / PMBASE */ @@ -76,12 +77,6 @@ #define SWGPE_CTRL (1 << 1) #define DEVACT_STS 0x44 #define PM2_CNT 0x50 -#define TCO1_CNT 0x60 -#define TCO_TMR_HLT (1 << 11) -#define TCO1_STS 0x64 -#define DMISCI_STS (1 << 9) -#define TCO2_STS 0x66 -#define TCO2_STS_SECOND_TO (1 << 1) #define GPE0_REG_MAX 4 #define GPE0_REG_SIZE 32 @@ -102,7 +97,7 @@ #define SWGPE_STS (1 << 2) #define HOT_PLUG_STS (1 << 1) #define GPE0_EN(x) (0x90 + (x * 4)) -#define WADT_en (1 << 18) +#define WADT_EN (1 << 18) #define GP27_EN (1 << 16) #define PME_B0_EN (1 << 13) #define ME_SCI_EN (1 << 12) @@ -129,9 +124,8 @@ struct chipset_power_state { uint16_t tco2_sts; uint32_t gpe0_sts[4]; uint32_t gpe0_en[4]; - uint16_t gen_pmcon1; - uint16_t gen_pmcon2; - uint16_t gen_pmcon3; + uint16_t gen_pmcon_a; + uint16_t gen_pmcon_b; int prev_sleep_state; uint16_t hsio_version; uint16_t hsio_checksum; @@ -152,7 +146,8 @@ void disable_smi(uint32_t mask); /* ALT_GP_SMI */ uint32_t clear_alt_smi_status(void); -void enable_alt_smi(uint32_t mask); +void enable_alt_smi(int gpionum, u32 mask); +void reset_alt_smi_status(void); /* TCO */ uint32_t clear_tco_status(void); @@ -169,4 +164,9 @@ void disable_gpe(uint32_t mask); /* Return the selected ACPI SCI IRQ */ int acpi_sci_irq(void); +/* Get base address PMC memory mapped registers. */ +uint8_t *pmc_mmio_regs(void); +/* Get base address of TCO I/O registers. */ +uint16_t pmc_tco_regs(void); + #endif diff --git a/src/soc/intel/skylake/include/soc/pmc.h b/src/soc/intel/skylake/include/soc/pmc.h new file mode 100644 index 0000000..72c9a59 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/pmc.h @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_PMC_H_ +#define _SOC_PMC_H_ + +/* PCI Configuration Space (D31:F2): PMC */ +#define ABASE 0x40 +#define ACTL 0x44 +#define PWRM_EN (1 << 8) +#define ACPI_EN (1 << 7) +#define SCI_IRQ_SEL (7 << 0) +#define SCIS_IRQ9 0 +#define SCIS_IRQ10 1 +#define SCIS_IRQ11 2 +#define SCIS_IRQ20 4 +#define SCIS_IRQ21 5 +#define SCIS_IRQ22 6 +#define SCIS_IRQ23 7 +#define PWRMBASE 0x48 +#define GEN_PMCON_A 0xa0 +#define SMI_LOCK (1 << 4) +#define GEN_PMCON_B 0xa4 +#define SLP_STR_POL_LOCK (1 << 18) +#define ACPI_BASE_LOCK (1 << 17) +#define SUS_PWR_FLR (1 << 14) +#define HOST_RST_STS (1 << 9) +#define RTC_BATTERY_DEAD (1 << 2) +#define PWR_FLR (1 << 1) +#define SLEEP_AFTER_POWER_FAIL (1 << 0) +#define ETR3 0xac +#define ETR3_CF9LOCK (1 << 31) +#define ETR3_CF9GR (1 << 20) + +/* Memory mapped IO registers in PMC */ +#define S3_PWRGATE_POL 0x28 +#define S3DC_GATE_SUS (1 << 1) +#define S3AC_GATE_SUS (1 << 0) +#define S4_PWRGATE_POL 0x2c +#define S4DC_GATE_SUS (1 << 1) +#define S4AC_GATE_SUS (1 << 0) +#define S5_PWRGATE_POL 0x30 +#define S5DC_GATE_SUS (1 << 15) +#define S5AC_GATE_SUS (1 << 14) +#define PMSYNC_TPR_CFG 0xc4 +#define PMSYNC_LOCK (1 << 31) + + +/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */ +#define TCO1_STS 0x04 +#define TCO2_STS 0x06 +#define TCO2_STS_SECOND_TO 0x02 +#define TCO2_STS_BOOT 0x04 +#define TCO1_CNT 0x08 +#define TCO_LOCK (1 << 12) +#define TCO_TMR_HLT (1 << 11) + +#endif diff --git a/src/soc/intel/skylake/include/soc/ramstage.h b/src/soc/intel/skylake/include/soc/ramstage.h index 9242aa9..fb06b33 100644 --- a/src/soc/intel/skylake/include/soc/ramstage.h +++ b/src/soc/intel/skylake/include/soc/ramstage.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,25 +15,20 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_RAMSTAGE_H_ -#define _BROADWELL_RAMSTAGE_H_ +#ifndef _SOC_RAMSTAGE_H_ +#define _SOC_RAMSTAGE_H_ +#include <chip.h> #include <device/device.h> -#include <soc/intel/broadwell/chip.h> +#include <soc/intel/common/ramstage.h> -void broadwell_init_pre_device(void *chip_info); -void broadwell_init_cpus(device_t dev); -void broadwell_pch_enable_dev(device_t dev); +void pch_enable_dev(device_t dev); +void soc_init_pre_device(void *chip_info); +void soc_init_cpus(device_t dev); -#if CONFIG_HAVE_REFCODE_BLOB -void broadwell_run_reference_code(void); -#else -static inline void broadwell_run_reference_code(void) { } -#endif - -extern struct pci_operations broadwell_pci_ops; +extern struct pci_operations soc_pci_ops; #endif diff --git a/src/soc/intel/skylake/include/soc/rcba.h b/src/soc/intel/skylake/include/soc/rcba.h deleted file mode 100644 index 2c40d07..0000000 --- a/src/soc/intel/skylake/include/soc/rcba.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _BROADWELL_RCBA_H_ -#define _BROADWELL_RCBA_H_ - -#include <soc/iomap.h> - -#define RCBA8(x) *((volatile u8 *)(RCBA_BASE_ADDRESS + x)) -#define RCBA16(x) *((volatile u16 *)(RCBA_BASE_ADDRESS + x)) -#define RCBA32(x) *((volatile u32 *)(RCBA_BASE_ADDRESS + x)) - -#define RCBA_AND_OR(bits, x, and, or) \ - RCBA##bits(x) = ((RCBA##bits(x) & (and)) | (or)) -#define RCBA8_AND_OR(x, and, or) RCBA_AND_OR(8, x, and, or) -#define RCBA16_AND_OR(x, and, or) RCBA_AND_OR(16, x, and, or) -#define RCBA32_AND_OR(x, and, or) RCBA_AND_OR(32, x, and, or) -#define RCBA32_OR(x, or) RCBA_AND_OR(32, x, ~0UL, or) - -#define RPC 0x0400 /* 32bit */ -#define RPFN 0x0404 /* 32bit */ - -/* Root Port configuration space hide */ -#define RPFN_HIDE(port) (1 << (((port) * 4) + 3)) -/* Get the function number assigned to a Root Port */ -#define RPFN_FNGET(reg,port) (((reg) >> ((port) * 4)) & 7) -/* Set the function number for a Root Port */ -#define RPFN_FNSET(port,func) (((func) & 7) << ((port) * 4)) -/* Root Port function number mask */ -#define RPFN_FNMASK(port) (7 << ((port) * 4)) - -#define NOINT 0 -#define INTA 1 -#define INTB 2 -#define INTC 3 -#define INTD 4 - -#define DIR_IDR 12 /* Interrupt D Pin Offset */ -#define DIR_ICR 8 /* Interrupt C Pin Offset */ -#define DIR_IBR 4 /* Interrupt B Pin Offset */ -#define DIR_IAR 0 /* Interrupt A Pin Offset */ - -#define PIRQA 0 -#define PIRQB 1 -#define PIRQC 2 -#define PIRQD 3 -#define PIRQE 4 -#define PIRQF 5 -#define PIRQG 6 -#define PIRQH 7 - -/* IO Buffer Programming */ -#define IOBPIRI 0x2330 -#define IOBPD 0x2334 -#define IOBPS 0x2338 -#define IOBPS_READY 0x0001 -#define IOBPS_TX_MASK 0x0006 -#define IOBPS_MASK 0xff00 -#define IOBPS_READ 0x0600 -#define IOBPS_WRITE 0x0700 -#define IOBPU 0x233a -#define IOBPU_MAGIC 0xf000 -#define IOBP_PCICFG_READ 0x0400 -#define IOBP_PCICFG_WRITE 0x0500 - -#define D31IP 0x3100 /* 32bit */ -#define D31IP_TTIP 24 /* Thermal Throttle Pin */ -#define D31IP_SIP2 20 /* SATA Pin 2 */ -#define D31IP_SMIP 12 /* SMBUS Pin */ -#define D31IP_SIP 8 /* SATA Pin */ -#define D30IP 0x3104 /* 32bit */ -#define D30IP_PIP 0 /* PCI Bridge Pin */ -#define D29IP 0x3108 /* 32bit */ -#define D29IP_E1P 0 /* EHCI #1 Pin */ -#define D28IP 0x310c /* 32bit */ -#define D28IP_P8IP 28 /* PCI Express Port 8 */ -#define D28IP_P7IP 24 /* PCI Express Port 7 */ -#define D28IP_P6IP 20 /* PCI Express Port 6 */ -#define D28IP_P5IP 16 /* PCI Express Port 5 */ -#define D28IP_P4IP 12 /* PCI Express Port 4 */ -#define D28IP_P3IP 8 /* PCI Express Port 3 */ -#define D28IP_P2IP 4 /* PCI Express Port 2 */ -#define D28IP_P1IP 0 /* PCI Express Port 1 */ -#define D27IP 0x3110 /* 32bit */ -#define D27IP_ZIP 0 /* HD Audio Pin */ -#define D26IP 0x3114 /* 32bit */ -#define D26IP_E2P 0 /* EHCI #2 Pin */ -#define D25IP 0x3118 /* 32bit */ -#define D25IP_LIP 0 /* GbE LAN Pin */ -#define D22IP 0x3124 /* 32bit */ -#define D22IP_KTIP 12 /* KT Pin */ -#define D22IP_IDERIP 8 /* IDE-R Pin */ -#define D22IP_MEI2IP 4 /* MEI #2 Pin */ -#define D22IP_MEI1IP 0 /* MEI #1 Pin */ -#define D20IP 0x3128 /* 32bit */ -#define D20IP_XHCI 0 /* XHCI Pin */ -#define D31IR 0x3140 /* 16bit */ -#define D30IR 0x3142 /* 16bit */ -#define D29IR 0x3144 /* 16bit */ -#define D28IR 0x3146 /* 16bit */ -#define D27IR 0x3148 /* 16bit */ -#define D26IR 0x314c /* 16bit */ -#define D25IR 0x3150 /* 16bit */ -#define D23IR 0x3158 /* 16bit */ -#define D22IR 0x315c /* 16bit */ -#define D20IR 0x3160 /* 16bit */ -#define D21IR 0x3164 /* 16bit */ -#define D19IR 0x3168 /* 16bit */ -#define ACPIIRQEN 0x31e0 /* 32bit */ -#define OIC 0x31fe /* 16bit */ -#define DEEP_S3_POL 0x3328 /* 32bit */ -#define DEEP_S3_EN_AC (1 << 0) -#define DEEP_S3_EN_DC (1 << 1) -#define DEEP_S5_POL 0x3330 /* 32bit */ -#define DEEP_S5_EN_AC (1 << 14) -#define DEEP_S5_EN_DC (1 << 15) -#define DEEP_SX_CONFIG 0x3334 /* 32bit */ -#define DEEP_SX_WAKE_PIN_EN (1 << 2) -#define DEEP_SX_ACPRESENT_PD (1 << 1) -#define DEEP_SX_GP27_PIN_EN (1 << 0) -#define PMSYNC_CONFIG 0x33c4 /* 32bit */ -#define PMSYNC_CONFIG2 0x33cc /* 32bit */ -#define SOFT_RESET_CTRL 0x38f4 -#define SOFT_RESET_DATA 0x38f8 - -#define DIR_ROUTE(a,b,c,d) \ - (((d) << DIR_IDR) | ((c) << DIR_ICR) | \ - ((b) << DIR_IBR) | ((a) << DIR_IAR)) - -#define RC 0x3400 /* 32bit */ -#define HPTC 0x3404 /* 32bit */ -#define GCS 0x3410 /* 32bit */ -#define BUC 0x3414 /* 32bit */ -#define PCH_DISABLE_GBE (1 << 5) -#define FD 0x3418 /* 32bit */ -#define FDSW 0x3420 /* 8bit */ -#define DISPBDF 0x3424 /* 16bit */ -#define FD2 0x3428 /* 32bit */ -#define CG 0x341c /* 32bit */ - -/* Function Disable 1 RCBA 0x3418 */ -#define PCH_DISABLE_ALWAYS (1 << 0) -#define PCH_DISABLE_ADSPD (1 << 1) -#define PCH_DISABLE_SATA1 (1 << 2) -#define PCH_DISABLE_SMBUS (1 << 3) -#define PCH_DISABLE_HD_AUDIO (1 << 4) -#define PCH_DISABLE_EHCI2 (1 << 13) -#define PCH_DISABLE_LPC (1 << 14) -#define PCH_DISABLE_EHCI1 (1 << 15) -#define PCH_DISABLE_PCIE(x) (1 << (16 + x)) -#define PCH_DISABLE_THERMAL (1 << 24) -#define PCH_DISABLE_SATA2 (1 << 25) -#define PCH_DISABLE_XHCI (1 << 27) - -/* Function Disable 2 RCBA 0x3428 */ -#define PCH_DISABLE_KT (1 << 4) -#define PCH_DISABLE_IDER (1 << 3) -#define PCH_DISABLE_MEI2 (1 << 2) -#define PCH_DISABLE_MEI1 (1 << 1) -#define PCH_ENABLE_DBDF (1 << 0) - -#endif diff --git a/src/soc/intel/skylake/include/soc/reset.h b/src/soc/intel/skylake/include/soc/reset.h deleted file mode 100644 index 6f21181..0000000 --- a/src/soc/intel/skylake/include/soc/reset.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _BROADWELL_RESET_H_ -#define _BROADWELL_RESET_H_ - -void reset_system(void); - -#endif diff --git a/src/soc/intel/skylake/include/soc/romstage.h b/src/soc/intel/skylake/include/soc/romstage.h index b636223..f030301 100644 --- a/src/soc/intel/skylake/include/soc/romstage.h +++ b/src/soc/intel/skylake/include/soc/romstage.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,38 +15,16 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_ROMSTAGE_H_ -#define _BROADWELL_ROMSTAGE_H_ +#ifndef _SOC_ROMSTAGE_H_ +#define _SOC_ROMSTAGE_H_ -#include <stdint.h> -#include <arch/cpu.h> - -struct chipset_power_state; -struct pei_data; -struct romstage_params { - unsigned long bist; - struct chipset_power_state *power_state; - struct pei_data *pei_data; -}; - -void mainboard_romstage_entry(struct romstage_params *params); -void romstage_common(struct romstage_params *params); -void *asmlinkage romstage_main(unsigned long bist, uint32_t tsc_lo, - uint32_t tsc_high); -void asmlinkage romstage_after_car(void); -void raminit(struct pei_data *pei_data); -void *setup_stack_and_mttrs(void); +#include <soc/intel/common/romstage.h> struct chipset_power_state; struct chipset_power_state *fill_power_state(void); -void report_platform_info(void); -void report_memory_config(void); - -void set_max_freq(void); - void systemagent_early_init(void); void pch_early_init(void); void pch_uart_init(void); @@ -56,6 +35,6 @@ int smbus_read_byte(unsigned device, unsigned address); int early_spi_read(u32 offset, u32 size, u8 *buffer); int early_spi_read_wpsr(u8 *sr); +void mainboard_fill_spd_data(struct pei_data *pei_data); -void mainboard_pre_console_init(void); -#endif +#endif /* _SOC_ROMSTAGE_H_ */ diff --git a/src/soc/intel/skylake/include/soc/sata.h b/src/soc/intel/skylake/include/soc/sata.h deleted file mode 100644 index 73e7b31..0000000 --- a/src/soc/intel/skylake/include/soc/sata.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _BROADWELL_SATA_H_ -#define _BROADWELL_SATA_H_ - -#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ -#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ -#define SATA_SP 0xd0 /* Scratchpad */ - -/* SATA IOBP Registers */ -#define SATA_IOBP_SP0_SECRT88 0xea002688 -#define SATA_IOBP_SP1_SECRT88 0xea002488 - -#define SATA_SECRT88_VADJ_MASK 0xff -#define SATA_SECRT88_VADJ_SHIFT 16 - -#define SATA_IOBP_SP0DTLE_DATA 0xea002550 -#define SATA_IOBP_SP0DTLE_EDGE 0xea002554 -#define SATA_IOBP_SP1DTLE_DATA 0xea002750 -#define SATA_IOBP_SP1DTLE_EDGE 0xea002754 - -#define SATA_DTLE_MASK 0xF -#define SATA_DTLE_DATA_SHIFT 24 -#define SATA_DTLE_EDGE_SHIFT 16 - -/* PCI Configuration Space (D31:F1): IDE */ -#define INTR_LN 0x3c -#define IDE_TIM_PRI 0x40 /* IDE timings, primary */ -#define IDE_DECODE_ENABLE (1 << 15) -#define IDE_SITRE (1 << 14) -#define IDE_ISP_5_CLOCKS (0 << 12) -#define IDE_ISP_4_CLOCKS (1 << 12) -#define IDE_ISP_3_CLOCKS (2 << 12) -#define IDE_RCT_4_CLOCKS (0 << 8) -#define IDE_RCT_3_CLOCKS (1 << 8) -#define IDE_RCT_2_CLOCKS (2 << 8) -#define IDE_RCT_1_CLOCKS (3 << 8) -#define IDE_DTE1 (1 << 7) -#define IDE_PPE1 (1 << 6) -#define IDE_IE1 (1 << 5) -#define IDE_TIME1 (1 << 4) -#define IDE_DTE0 (1 << 3) -#define IDE_PPE0 (1 << 2) -#define IDE_IE0 (1 << 1) -#define IDE_TIME0 (1 << 0) -#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ - -#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */ -#define IDE_SSDE1 (1 << 3) -#define IDE_SSDE0 (1 << 2) -#define IDE_PSDE1 (1 << 1) -#define IDE_PSDE0 (1 << 0) - -#define IDE_SDMA_TIM 0x4a - -#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */ -#define SIG_MODE_SEC_NORMAL (0 << 18) -#define SIG_MODE_SEC_TRISTATE (1 << 18) -#define SIG_MODE_SEC_DRIVELOW (2 << 18) -#define SIG_MODE_PRI_NORMAL (0 << 16) -#define SIG_MODE_PRI_TRISTATE (1 << 16) -#define SIG_MODE_PRI_DRIVELOW (2 << 16) -#define FAST_SCB1 (1 << 15) -#define FAST_SCB0 (1 << 14) -#define FAST_PCB1 (1 << 13) -#define FAST_PCB0 (1 << 12) -#define SCB1 (1 << 3) -#define SCB0 (1 << 2) -#define PCB1 (1 << 1) -#define PCB0 (1 << 0) - -#endif diff --git a/src/soc/intel/skylake/include/soc/serialio.h b/src/soc/intel/skylake/include/soc/serialio.h index 2fd6dca..0bc07c3 100644 --- a/src/soc/intel/skylake/include/soc/serialio.h +++ b/src/soc/intel/skylake/include/soc/serialio.h @@ -1,7 +1,8 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2014 Google Inc. + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -11,84 +12,44 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#ifndef _BROADWELL_SERIALIO_H_ -#define _BROADWELL_SERIALIO_H_ - -/* Serial IO IOBP Registers */ -#define SIO_IOBP_PORTCTRL0 0xcb000000 /* SDIO D23:F0 */ -#define SIO_IOBP_PORTCTRL0_ACPI_IRQ_EN (1 << 5) -#define SIO_IOBP_PORTCTRL0_PCI_CONF_DIS (1 << 4) -#define SIO_IOBP_PORTCTRL1 0xcb000014 /* SDIO D23:F0 */ -#define SIO_IOBP_PORTCTRL1_SNOOP_SELECT(x) (((x) & 3) << 13) -#define SIO_IOBP_GPIODF 0xcb000154 -#define SIO_IOBP_GPIODF_SDIO_IDLE_DET_EN (1 << 4) -#define SIO_IOBP_GPIODF_DMA_IDLE_DET_EN (1 << 3) -#define SIO_IOBP_GPIODF_UART_IDLE_DET_EN (1 << 2) -#define SIO_IOBP_GPIODF_I2C_IDLE_DET_EN (1 << 1) -#define SIO_IOBP_GPIODF_SPI_IDLE_DET_EN (1 << 0) -#define SIO_IOBP_GPIODF_UART0_BYTE_ACCESS (1 << 10) -#define SIO_IOBP_GPIODF_UART1_BYTE_ACCESS (1 << 11) -#define SIO_IOBP_PORTCTRL2 0xcb000240 /* DMA D21:F0 */ -#define SIO_IOBP_PORTCTRL3 0xcb000248 /* I2C0 D21:F1 */ -#define SIO_IOBP_PORTCTRL4 0xcb000250 /* I2C1 D21:F2 */ -#define SIO_IOBP_PORTCTRL5 0xcb000258 /* SPI0 D21:F3 */ -#define SIO_IOBP_PORTCTRL6 0xcb000260 /* SPI1 D21:F4 */ -#define SIO_IOBP_PORTCTRL7 0xcb000268 /* UART0 D21:F5 */ -#define SIO_IOBP_PORTCTRL8 0xcb000270 /* UART1 D21:F6 */ -#define SIO_IOBP_PORTCTRLX(x) (0xcb000240 + ((x) * 8)) -/* PORTCTRL 2-8 have the same layout */ -#define SIO_IOBP_PORTCTRL_ACPI_IRQ_EN (1 << 21) -#define SIO_IOBP_PORTCTRL_PCI_CONF_DIS (1 << 20) -#define SIO_IOBP_PORTCTRL_SNOOP_SELECT(x) (((x) & 3) << 18) -#define SIO_IOBP_PORTCTRL_INT_PIN(x) (((x) & 0xf) << 2) -#define SIO_IOBP_PORTCTRL_PM_CAP_PRSNT (1 << 1) -#define SIO_IOBP_FUNCDIS0 0xce00aa07 /* DMA D21:F0 */ -#define SIO_IOBP_FUNCDIS1 0xce00aa47 /* I2C0 D21:F1 */ -#define SIO_IOBP_FUNCDIS2 0xce00aa87 /* I2C1 D21:F2 */ -#define SIO_IOBP_FUNCDIS3 0xce00aac7 /* SPI0 D21:F3 */ -#define SIO_IOBP_FUNCDIS4 0xce00ab07 /* SPI1 D21:F4 */ -#define SIO_IOBP_FUNCDIS5 0xce00ab47 /* UART0 D21:F5 */ -#define SIO_IOBP_FUNCDIS6 0xce00ab87 /* UART1 D21:F6 */ -#define SIO_IOBP_FUNCDIS7 0xce00ae07 /* SDIO D23:F0 */ -#define SIO_IOBP_FUNCDIS_DIS (1 << 8) +#ifndef _SERIALIO_H_ +#define _SERIALIO_H_ -/* Serial IO Devices */ -#define SIO_ID_SDMA 0 /* D21:F0 */ -#define SIO_ID_I2C0 1 /* D21:F1 */ -#define SIO_ID_I2C1 2 /* D21:F2 */ -#define SIO_ID_SPI0 3 /* D21:F3 */ -#define SIO_ID_SPI1 4 /* D21:F4 */ -#define SIO_ID_UART0 5 /* D21:F5 */ -#define SIO_ID_UART1 6 /* D21:F6 */ -#define SIO_ID_SDIO 7 /* D23:F0 */ +#define SIO_REG_PPR_CLOCK 0x200 +#define SIO_REG_PPR_CLOCK_EN (1 << 0) +#define SIO_REG_PPR_CLOCK_UPDATE (1 << 31) +#define SIO_REG_PPR_CLOCK_N_DIV 0xc35 +#define SIO_REG_PPR_CLOCK_M_DIV 0x30 -#define SIO_REG_PPR_CLOCK 0x800 -#define SIO_REG_PPR_CLOCK_EN (1 << 0) -#define SIO_REG_PPR_CLOCK_UPDATE (1 << 31) -#define SIO_REG_PPR_CLOCK_M_DIV 0x25a -#define SIO_REG_PPR_CLOCK_N_DIV 0x7fff -#define SIO_REG_PPR_RST 0x804 -#define SIO_REG_PPR_RST_ASSERT 0x3 -#define SIO_REG_PPR_GEN 0x808 -#define SIO_REG_PPR_GEN_LTR_MODE_MASK (1 << 2) -#define SIO_REG_PPR_GEN_VOLTAGE_MASK (1 << 3) -#define SIO_REG_PPR_GEN_VOLTAGE(x) ((x & 1) << 3) -#define SIO_REG_AUTO_LTR 0x814 +#define SIO_REG_PPR_RESETS 0x204 +#define SIO_REG_PPR_RESETS_FUNC (1 << 0) +#define SIO_REG_PPR_RESETS_APB (1 << 1) +#define SIO_REG_PPR_RESETS_IDMA (1 << 2) -#define SIO_REG_SDIO_PPR_GEN 0x1008 -#define SIO_REG_SDIO_PPR_SW_LTR 0x1010 -#define SIO_REG_SDIO_PPR_CMD12 0x3c -#define SIO_REG_SDIO_PPR_CMD12_B30 (1 << 30) +typedef enum { + PchSerialIoDisabled, + PchSerialIoAcpi, + PchSerialIoPci, + PchSerialIoAcpiHidden, + PchSerialIoLegacyUart +} PCH_SERIAL_IO_MODE; -#define SIO_PIN_INTA 1 /* IRQ5 in ACPI mode */ -#define SIO_PIN_INTB 2 /* IRQ6 in ACPI mode */ -#define SIO_PIN_INTC 3 /* IRQ7 in ACPI mode */ -#define SIO_PIN_INTD 4 /* IRQ13 in ACPI mode */ +typedef enum { + PchSerialIoIndexI2C0, + PchSerialIoIndexI2C1, + PchSerialIoIndexI2C2, + PchSerialIoIndexI2C3, + PchSerialIoIndexI2C4, + PchSerialIoIndexI2C5, + PchSerialIoIndexSpi0, + PchSerialIoIndexSpi1, + PchSerialIoIndexUart0, + PchSerialIoIndexUart1, + PchSerialIoIndexUart2, + PchSerialIoIndexMax +} PCH_SERIAL_IO_CONTROLLER; #endif + diff --git a/src/soc/intel/skylake/include/soc/smbus.h b/src/soc/intel/skylake/include/soc/smbus.h index fb13c2d..c081cdf 100644 --- a/src/soc/intel/skylake/include/soc/smbus.h +++ b/src/soc/intel/skylake/include/soc/smbus.h @@ -4,6 +4,7 @@ * Copyright (C) 2005 Yinghai Lu <yinghailu(a)gmail.com> * Copyright (C) 2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,17 +17,19 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_SMBUS_H_ -#define _BROADWELL_SMBUS_H_ +#ifndef _SOC_SMBUS_H_ +#define _SOC_SMBUS_H_ /* PCI Configuration Space (D31:F3): SMBus */ #define SMB_BASE 0x20 #define HOSTC 0x40 #define HST_EN (1 << 0) #define SMB_RCV_SLVA 0x09 +/* SMBUS TCO base address. */ +#define TCOBASE 0x50 /* SMBus I/O bits. */ #define SMBHSTSTAT 0x0 diff --git a/src/soc/intel/skylake/include/soc/smm.h b/src/soc/intel/skylake/include/soc/smm.h index f7f515c..d895302 100644 --- a/src/soc/intel/skylake/include/soc/smm.h +++ b/src/soc/intel/skylake/include/soc/smm.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,14 +15,16 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_SMM_H_ -#define _BROADWELL_SMM_H_ +#ifndef _SOC_SMM_H_ +#define _SOC_SMM_H_ #include <stdint.h> #include <cpu/x86/msr.h> +#include <soc/intel/common/romstage.h> +#include <soc/intel/common/memmap.h> struct ied_header { char signature[10]; @@ -40,23 +43,16 @@ struct smm_relocation_params { msr_t emrr_mask; msr_t uncore_emrr_base; msr_t uncore_emrr_mask; - /* The smm_save_state_in_msrs field indicates if SMM save state + /* + * The smm_save_state_in_msrs field indicates if SMM save state * locations live in MSRs. This indicates to the CPUs how to adjust - * the SMMBASE and IEDBASE */ + * the SMMBASE and IEDBASE + */ int smm_save_state_in_msrs; }; -/* There is a bug in the order of Kconfig includes in that arch/x86/Kconfig - * is included after chipset code. This causes the chipset's Kconfig to be - * clobbered by the arch/x86/Kconfig if they have the same name. */ -static inline int smm_region_size(void) -{ - /* Make it 8MiB by default. */ - if (CONFIG_SMM_TSEG_SIZE == 0) - return (8 << 20); - return CONFIG_SMM_TSEG_SIZE; -} - +#define smm_region_size mmap_region_granluarity +#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER) int smm_initialize(void); void smm_relocate(void); @@ -64,10 +60,24 @@ void smm_relocate(void); void southbridge_trigger_smi(void); void southbridge_clear_smi_status(void); -/* The initialization of the southbridge is split into 2 components. One is +/* + * The initialization of the southbridge is split into 2 compoments. One is * for clearing the state in the SMM registers. The other is for enabling - * SMIs. They are split so that other work between the 2 actions. */ + * SMIs. + */ void southbridge_smm_clear_state(void); void southbridge_smm_enable_smi(void); +#else /* CONFIG_HAVE_SMI_HANDLER */ +static inline int smm_initialize(void) +{ + return 0; +} + +static inline void smm_relocate(void) {} +static inline void southbridge_trigger_smi(void) {} +static inline void southbridge_clear_smi_status(void) {} +static inline void southbridge_smm_clear_state(void) {} +static inline void southbridge_smm_enable_smi(void) {} +#endif /* CONFIG_HAVE_SMI_HANDLER */ #endif diff --git a/src/soc/intel/skylake/include/soc/spi.h b/src/soc/intel/skylake/include/soc/spi.h index 1449e29..a31c9b2 100644 --- a/src/soc/intel/skylake/include/soc/spi.h +++ b/src/soc/intel/skylake/include/soc/spi.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,39 +15,39 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_SPI_H_ -#define _BROADWELL_SPI_H_ +#ifndef _SOC_SPI_H_ +#define _SOC_SPI_H_ /* * SPI Opcode Menu setup for SPIBAR lockdown * should support most common flash chips. */ - -#define SPIBAR_OFFSET 0x3800 -#define SPIBAR8(x) RCBA8(x + SPIBAR_OFFSET) -#define SPIBAR16(x) RCBA16(x + SPIBAR_OFFSET) -#define SPIBAR32(x) RCBA32(x + SPIBAR_OFFSET) - -/* Registers within the SPIBAR */ -#define SPIBAR_SSFC 0x91 -#define SPIBAR_FDOC 0xb0 -#define SPIBAR_FDOD 0xb4 - -#define SPI_PRR_MAX 5 -#define SPI_PRR(x) (0x74 + ((x) * 4)) -#define SPI_PRR_SHIFT 12 -#define SPI_PRR_MASK 0x1fff -#define SPI_PRR_BASE_SHIFT 0 -#define SPI_PRR_LIMIT_SHIFT 16 -#define SPI_PRR_WPE (1 << 31) - -#define SPIBAR_PREOP 0x94 -#define SPIBAR_OPTYPE 0x96 -#define SPIBAR_OPMENU_LOWER 0x98 -#define SPIBAR_OPMENU_UPPER 0x9c +#define SPIDVID_OFFSET 0x0 +/* Temporay SPI BASE ADDRESS */ +#define TEMP_SPI_BAR 0xFE010000 +/* SPI BASE ADDRESS Register */ +#define B_PCH_SPI_BAR0_MASK 0x0FFF +#define PCH_SPI_BASE_ADDRESS 0x10 +#define SPIBAR_MEMBAR_MASK 0xFFFFF000 +/* Reigsters within the SPIBAR */ +#define SPIBAR_SSFC 0xA1 + +#define SPIBAR_PREOP 0xA4 +#define SPIBAR_OPTYPE 0xA6 +#define SPIBAR_OPMENU_LOWER 0xA8 +#define SPIBAR_OPMENU_UPPER 0xAc +/* STRAP LOCK Register */ +#define SPIBAR_RESET_LOCK 0xF0 +#define SPIBAR_RESET_LOCK_DISABLE 0 +#define SPIBAR_RESET_LOCK_ENABLE 1 +/* STRAP MSG Control Register*/ +#define SPIBAR_RESET_CTRL 0xF4 +#define SPIBAR_RESET_CTRL_SSMC 1 +/* STRAP Data Register*/ +#define SPIBAR_RESET_DATA 0xF8 #define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */ #define SPI_OPTYPE_0 0x01 /* Write, no address */ @@ -78,33 +79,52 @@ (SPI_OPMENU_1 << 8) | SPI_OPMENU_0) #define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \ - (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \ - (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \ + (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \ + (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \ (SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0)) #define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */ -#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */ -#define SPIBAR_HSFS_FLOCKDN (1 << 15)/* Flash Configuration Lock-Down */ -#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */ -#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */ -#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ -#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ -#define SPIBAR_HSFC 0x06 /* SPI hardware sequence control */ -#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8) -#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ -#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ -#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ -#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ -#define SPIBAR_FADDR 0x08 /* SPI flash address */ -#define SPIBAR_FDATA(n) (0x10 + (4 * n)) /* SPI flash data */ -#define SPIBAR_SSFS 0x90 -#define SPIBAR_SSFS_ERROR (1 << 3) -#define SPIBAR_SSFS_DONE (1 << 2) -#define SPIBAR_SSFC 0x91 -#define SPIBAR_SSFC_DATA (1 << 14) -#define SPIBAR_SSFC_GO (1 << 1) - -int spi_flash_protect(u32 start, u32 size); - +#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */ +#define SPIBAR_HSFS_FLOCKDN (1 << 15)/* Flash Configuration Lock-Down */ +#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */ +#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */ +#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ +#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ +#define SPIBAR_HSFS_BERASE_MASK 3 /* Block/Sector Erase MASK */ +#define SPIBAR_HSFS_BERASE_OFFSET 3 /* Block/Sector Erase OFFSET */ +#define SPIBAR_HSFC 0x06 /* SPI hardware sequence control */ +#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8) +#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ +#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ +#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ +#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ +#define SPIBAR_FADDR 0x08 /* SPI flash address */ +#define SPIBAR_FADDR_MASK 0x7FFFFFF + +#define SPIBAR_FDATA(n) (0x10 + (4 * n)) /* SPI flash data */ +#define SPIBAR_FPR(n) (0x84 + (4 * n)) /* SPI flash protected range */ +#define SPIBAR_FPR_WPE (1 << 31) /* Flash Write protected */ +#define SPIBAR_SSFS 0xA0 +#define SPIBAR_SSFS_ERROR (1 << 3) +#define SPIBAR_SSFS_DONE (1 << 2) +#define SPIBAR_SSFC 0xA1 +#define SPIBAR_SSFC_DATA (1 << 14) +#define SPIBAR_SSFC_GO (1 << 1) + +#define SPIBAR_FDOC 0xB4 +#define SPIBAR_FDOC_COMPONENT (1 << 12) +#define SPIBAR_FDOC_FDSI_1 (1 << 2) + +#define SPIBAR_FDOD 0xB8 +#define FLCOMP_C0DEN_MASK 0xF +#define FLCOMP_C0DEN_8MB 4 +#define FLCOMP_C0DEN_16MB 5 +#define FLCOMP_C0DEN_32MB 6 + +#define SPIBAR_BIOS_CNTL 0xDC +#define SPIBAR_BC_WPD (1 << 0) +#define SPIBAR_BC_EISS (1 << 5) + +void *get_spi_bar(void); #endif diff --git a/src/soc/intel/skylake/include/soc/systemagent.h b/src/soc/intel/skylake/include/soc/systemagent.h index 325a4a5..6bb5c66 100644 --- a/src/soc/intel/skylake/include/soc/systemagent.h +++ b/src/soc/intel/skylake/include/soc/systemagent.h @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2008 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,31 +16,23 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_SYSTEMAGENT_H_ -#define _BROADWELL_SYSTEMAGENT_H_ +#ifndef _SOC_SYSTEMAGENT_H_ +#define _SOC_SYSTEMAGENT_H_ #include <soc/iomap.h> #define SA_IGD_OPROM_VENDEV 0x80860406 -#define IGD_HASWELL_ULT_GT1 0x0a06 -#define IGD_HASWELL_ULT_GT2 0x0a16 -#define IGD_HASWELL_ULT_GT3 0x0a26 -#define IGD_BROADWELL_U_GT1 0x1606 -#define IGD_BROADWELL_U_GT2 0x1616 -#define IGD_BROADWELL_U_GT3_15W 0x1626 -#define IGD_BROADWELL_U_GT3_28W 0x162b -#define IGD_BROADWELL_Y_GT2 0x161e -#define IGD_BROADWELL_H_GT2 0x1612 -#define IGD_BROADWELL_H_GT3 0x1622 - -#define MCH_BROADWELL_ID_U_Y 0x1604 -#define MCH_BROADWELL_REV_D0 0x06 -#define MCH_BROADWELL_REV_E0 0x08 -#define MCH_BROADWELL_REV_F0 0x09 +#define IGD_SKYLAKE_GT1_SULTM 0x1906 +#define IGD_SKYLAKE_GT2_SULXM 0x191E +#define IGD_SKYLAKE_GT2_SULTM 0x1916 + +#define MCH_SKYLAKE_ID_U 0x1904 +#define MCH_SKYLAKE_ID_Y 0x190c +#define MCH_SKYLAKE_ID_ULX 0x1924 /* Device 0:0.0 PCI configuration space */ @@ -91,9 +84,9 @@ /* MCHBAR */ -#define MCHBAR8(x) *((volatile u8 *)(MCH_BASE_ADDRESS + x)) -#define MCHBAR16(x) *((volatile u16 *)(MCH_BASE_ADDRESS + x)) -#define MCHBAR32(x) *((volatile u32 *)(MCH_BASE_ADDRESS + x)) +#define MCHBAR8(x) (*(volatile u8 *)(MCH_BASE_ADDRESS + x)) +#define MCHBAR16(x) (*(volatile u16 *)(MCH_BASE_ADDRESS + x)) +#define MCHBAR32(x) (*(volatile u32 *)(MCH_BASE_ADDRESS + x)) #define MCHBAR_PEI_VERSION 0x5034 #define BIOS_RESET_CPL 0x5da8 @@ -115,8 +108,6 @@ #define MAILBOX_BIOS_CMD_FSM_MEASURE_INTVL 0x909 #define MAILBOX_BIOS_CMD_READ_PCH_POWER 0xa #define MAILBOX_BIOS_CMD_READ_PCH_POWER_EXT 0xb -#define MAILBOX_BIOS_CMD_READ_C9C10_VOLTAGE 0x26 -#define MAILBOX_BIOS_CMD_WRITE_C9C10_VOLTAGE 0x27 /* Errors are returned back in bits 7:0. */ #define MAILBOX_BIOS_ERROR_NONE 0 #define MAILBOX_BIOS_ERROR_INVALID_COMMAND 1 diff --git a/src/soc/intel/skylake/include/soc/xhci.h b/src/soc/intel/skylake/include/soc/xhci.h index 2b899a3..8830ede 100644 --- a/src/soc/intel/skylake/include/soc/xhci.h +++ b/src/soc/intel/skylake/include/soc/xhci.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,11 +15,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#ifndef _BROADWELL_XHCI_H_ -#define _BROADWELL_XHCI_H_ +#ifndef _SOC_XHCI_H_ +#define _SOC_XHCI_H_ + +#include <rules.h> /* XHCI PCI Registers */ #define XHCI_PWR_CTL_STS 0x74 @@ -39,14 +42,14 @@ #define XHCI_USB3PDO 0xe8 /* XHCI Memory Registers */ -#define XHCI_USB3_PORTSC(port) (0x530 + (port * 0x10)) +#define XHCI_USB3_PORTSC(port) (0x510 + (port * 0x10)) #define XHCI_USB3_PORTSC_CHST (0x7f << 17) #define XHCI_USB3_PORTSC_WCE (1 << 25) /* Wake on Connect */ #define XHCI_USB3_PORTSC_WDE (1 << 26) /* Wake on Disconnect */ #define XHCI_USB3_PORTSC_WOE (1 << 27) /* Wake on Overcurrent */ #define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */ -#define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */ -#define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */ +#define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */ +#define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */ #define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */ #define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */ #define XHCI_PLSR_DISABLED (4 << 5) /* Port is disabled */ @@ -54,7 +57,7 @@ #define XHCI_PLSR_POLLING (7 << 5) /* Port is polling */ #define XHCI_PLSW_ENABLE (5 << 5) /* Transition from disabled */ -#ifdef __SMM__ +#if ENV_SMM void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ); #endif diff --git a/src/soc/intel/skylake/iobp.c b/src/soc/intel/skylake/iobp.c deleted file mode 100644 index 870f6af..0000000 --- a/src/soc/intel/skylake/iobp.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <delay.h> -#include <arch/io.h> -#include <soc/iobp.h> -#include <soc/rcba.h> - -#define IOBP_RETRY 1000 - -static inline int iobp_poll(void) -{ - unsigned try; - - for (try = IOBP_RETRY; try > 0; try--) { - u16 status = RCBA16(IOBPS); - if ((status & IOBPS_READY) == 0) - return 1; - udelay(10); - } - - printk(BIOS_ERR, "IOBP: timeout waiting for transaction to complete\n"); - return 0; -} - -u32 pch_iobp_read(u32 address) -{ - u16 status; - - if (!iobp_poll()) - return 0; - - /* Set the address */ - RCBA32(IOBPIRI) = address; - - /* READ OPCODE */ - status = RCBA16(IOBPS); - status &= ~IOBPS_MASK; - status |= IOBPS_READ; - RCBA16(IOBPS) = status; - - /* Undocumented magic */ - RCBA16(IOBPU) = IOBPU_MAGIC; - - /* Set ready bit */ - status = RCBA16(IOBPS); - status |= IOBPS_READY; - RCBA16(IOBPS) = status; - - if (!iobp_poll()) - return 0; - - /* Check for successful transaction */ - status = RCBA16(IOBPS); - if (status & IOBPS_TX_MASK) { - printk(BIOS_ERR, "IOBP: read 0x%08x failed\n", address); - return 0; - } - - /* Read IOBP data */ - return RCBA32(IOBPD); -} - -void pch_iobp_write(u32 address, u32 data) -{ - u16 status; - - if (!iobp_poll()) - return; - - /* Set the address */ - RCBA32(IOBPIRI) = address; - - /* WRITE OPCODE */ - status = RCBA16(IOBPS); - status &= ~IOBPS_MASK; - status |= IOBPS_WRITE; - RCBA16(IOBPS) = status; - - RCBA32(IOBPD) = data; - - /* Undocumented magic */ - RCBA16(IOBPU) = IOBPU_MAGIC; - - /* Set ready bit */ - status = RCBA16(IOBPS); - status |= IOBPS_READY; - RCBA16(IOBPS) = status; - - if (!iobp_poll()) - return; - - /* Check for successful transaction */ - status = RCBA16(IOBPS); - if (status & IOBPS_TX_MASK) - printk(BIOS_ERR, "IOBP: write 0x%08x failed\n", address); -} - -void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue) -{ - u32 data = pch_iobp_read(address); - - /* Update the data */ - data &= andvalue; - data |= orvalue; - - pch_iobp_write(address, data); -} - -void pch_iobp_exec(u32 addr, u16 op_code, u8 route_id, u32 *data, u8 *resp) -{ - if (!data || !resp) - return; - - *resp = -1; - if (!iobp_poll()) - return; - - /* RCBA2330[31:0] = Address */ - RCBA32(IOBPIRI) = addr; - /* RCBA2338[15:8] = opcode */ - RCBA16(IOBPS) = (RCBA16(IOBPS) & 0x00ff) | op_code; - /* RCBA233A[15:8] = 0xf0 RCBA233A[7:0] = Route ID */ - RCBA16(IOBPU) = IOBPU_MAGIC | route_id; - - RCBA32(IOBPD) = *data; - /* Set RCBA2338[0] to trigger IOBP transaction*/ - RCBA16(IOBPS) = RCBA16(IOBPS) | 0x1; - - if (!iobp_poll()) - return; - - *resp = (RCBA16(IOBPS) & IOBPS_TX_MASK) >> 1; - *data = RCBA32(IOBPD); -} diff --git a/src/soc/intel/skylake/lpc.c b/src/soc/intel/skylake/lpc.c index 6cc1116..d69a0f3 100644 --- a/src/soc/intel/skylake/lpc.c +++ b/src/soc/intel/skylake/lpc.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,15 +16,16 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ +#include <arch/acpigen.h> +#include "chip.h" #include <console/console.h> #include <delay.h> #include <device/device.h> #include <device/pci.h> #include <device/pci_ids.h> -#include <pc80/mc146818rtc.h> #include <pc80/isa-dma.h> #include <pc80/i8259.h> #include <arch/io.h> @@ -34,21 +36,17 @@ #include <cbmem.h> #include <reg_script.h> #include <string.h> +#include <soc/acpi.h> #include <soc/gpio.h> -#include <soc/iobp.h> #include <soc/iomap.h> #include <soc/lpc.h> #include <soc/nvs.h> #include <soc/pch.h> #include <soc/pci_devs.h> #include <soc/pm.h> +#include <soc/pmc.h> #include <soc/ramstage.h> -#include <soc/rcba.h> -#include <soc/intel/broadwell/chip.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <cpu/cpu.h> - +#include <soc/pcr.h> #if IS_ENABLED(CONFIG_CHROMEOS) #include <vendorcode/google/chromeos/chromeos.h> #endif @@ -57,25 +55,26 @@ static void pch_enable_ioapic(struct device *dev) { u32 reg32; - set_ioapic_id(VIO_APIC_VADDR, 0x02); + set_ioapic_id((void *)IO_APIC_ADDR, 0x02); /* affirm full set of redirection table entries ("write once") */ - reg32 = io_apic_read(VIO_APIC_VADDR, 0x01); + reg32 = io_apic_read((void *)IO_APIC_ADDR, 0x01); /* PCH-LP has 39 redirection entries */ reg32 &= ~0x00ff0000; reg32 |= 0x00270000; - io_apic_write(VIO_APIC_VADDR, 0x01, reg32); + io_apic_write((void *)IO_APIC_ADDR, 0x01, reg32); /* * Select Boot Configuration register (0x03) and * use Processor System Bus (0x01) to deliver interrupts. */ - io_apic_write(VIO_APIC_VADDR, 0x03, 0x01); + io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01); } -/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control +/* + * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control * 0x00 - 0000 = Reserved * 0x01 - 0001 = Reserved * 0x02 - 0010 = Reserved @@ -101,18 +100,17 @@ static void pch_pirq_init(device_t dev) device_t irq_dev; config_t *config = dev->chip_info; - pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); - pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); - pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); - pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); + pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQA_ROUT, config->pirqa_routing); + pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQB_ROUT, config->pirqb_routing); + pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQC_ROUT, config->pirqc_routing); + pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQD_ROUT, config->pirqd_routing); + pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQE_ROUT, config->pirqe_routing); + pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQF_ROUT, config->pirqf_routing); + pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQG_ROUT, config->pirqg_routing); + pcr_write8(PID_ITSS, R_PCH_PCR_ITSS_PIRQH_ROUT, config->pirqh_routing); - pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); - pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); - pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); - pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); - - for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { - u8 int_pin=0, int_line=0; + for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { + u8 int_pin = 0, int_line = 0; if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) continue; @@ -120,10 +118,18 @@ static void pch_pirq_init(device_t dev) int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); switch (int_pin) { - case 1: /* INTA# */ int_line = config->pirqa_routing; break; - case 2: /* INTB# */ int_line = config->pirqb_routing; break; - case 3: /* INTC# */ int_line = config->pirqc_routing; break; - case 4: /* INTD# */ int_line = config->pirqd_routing; break; + case 1: /* INTA# */ + int_line = config->pirqa_routing; + break; + case 2: /* INTB# */ + int_line = config->pirqb_routing; + break; + case 3: /* INTC# */ + int_line = config->pirqc_routing; + break; + case 4: /* INTD# */ + int_line = config->pirqd_routing; + break; } if (!int_line) @@ -133,336 +139,26 @@ static void pch_pirq_init(device_t dev) } } -static void pch_power_options(device_t dev) -{ - u16 reg16; - const char *state; - /* Get the chip configuration */ - config_t *config = dev->chip_info; - int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; - - /* Which state do we want to goto after g3 (power restored)? - * 0 == S0 Full On - * 1 == S5 Soft Off - * - * If the option is not existent (Laptops), use Kconfig setting. - */ - get_option(&pwr_on, "power_on_after_fail"); - - reg16 = pci_read_config16(dev, GEN_PMCON_3); - reg16 &= 0xfffe; - switch (pwr_on) { - case MAINBOARD_POWER_OFF: - reg16 |= 1; - state = "off"; - break; - case MAINBOARD_POWER_ON: - reg16 &= ~1; - state = "on"; - break; - case MAINBOARD_POWER_KEEP: - reg16 &= ~1; - state = "state keep"; - break; - default: - state = "undefined"; - } - pci_write_config16(dev, GEN_PMCON_3, reg16); - printk(BIOS_INFO, "Set power %s after power failure.\n", state); - - /* GPE setup based on device tree configuration */ - enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2, - config->gpe0_en_3, config->gpe0_en_4); - - /* SMI setup based on device tree configuration */ - enable_alt_smi(config->alt_gp_smi_en); -} - -#if IS_ENABLED(CONFIG_CHROMEOS) && IS_ENABLED(CONFIG_CHROMEOS_VBNV_CMOS) -/* - * Preserve Vboot NV data when clearing CMOS as it will - * have been re-initialized already by Vboot firmware init. - */ -static void pch_cmos_init_preserve(int reset) -{ - uint8_t vbnv[CONFIG_VBNV_SIZE]; - - if (reset) - read_vbnv(vbnv); - - cmos_init(reset); - - if (reset) - save_vbnv(vbnv); -} -#endif - -static void pch_rtc_init(struct device *dev) -{ - u8 reg8; - int rtc_failed; - - reg8 = pci_read_config8(dev, GEN_PMCON_3); - rtc_failed = reg8 & RTC_BATTERY_DEAD; - if (rtc_failed) { - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(dev, GEN_PMCON_3, reg8); - printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); - } - -#if IS_ENABLED(CONFIG_CHROMEOS) && IS_ENABLED(CONFIG_CHROMEOS_VBNV_CMOS) - pch_cmos_init_preserve(rtc_failed); -#else - cmos_init(rtc_failed); -#endif -} static const struct reg_script pch_misc_init_script[] = { - /* Setup SLP signal assertion, SLP_S4=4s, SLP_S3=50ms */ - REG_PCI_RMW16(GEN_PMCON_3, ~((3 << 4)|(1 << 10)), - (1 << 3)|(1 << 11)|(1 << 12)), - /* Prepare sleep mode */ - REG_IO_RMW32(ACPI_BASE_ADDRESS + PM1_CNT, ~SLP_TYP, SCI_EN), /* Setup NMI on errors, disable SERR */ REG_IO_RMW8(0x61, ~0xf0, (1 << 2)), /* Disable NMI sources */ REG_IO_OR8(0x70, (1 << 7)), - /* Indicate DRAM init done for MRC */ - REG_PCI_OR8(GEN_PMCON_2, (1 << 7)), /* Enable BIOS updates outside of SMM */ REG_PCI_RMW8(0xdc, ~(1 << 5), 0), - /* Clear status bits to prevent unexpected wake */ - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x3310, 0x0000002f), - REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x3f02, ~0x0000000f, 0), - /* Enable PCIe Releaxed Order */ - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2314, (1 << 31) | (1 << 7)), - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x1114, (1 << 15) | (1 << 14)), /* Setup SERIRQ, enable continuous mode */ REG_PCI_OR8(SERIRQ_CNTL, (1 << 7) | (1 << 6)), -#if !CONFIG_SERIRQ_CONTINUOUS_MODE +#if !IS_ENABLED(CONFIG_SERIRQ_CONTINUOUS_MODE) REG_PCI_RMW8(SERIRQ_CNTL, ~(1 << 6), 0), #endif REG_SCRIPT_END }; -/* Magic register settings for power management */ -static const struct reg_script pch_pm_init_script[] = { - REG_PCI_WRITE8(0xa9, 0x46), - REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x232c, ~1, 0), - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x1100, 0x0000c13f), - REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x2320, ~0x60, 0x10), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3314, 0x00012fff), - REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x3318, ~0x000f0330, 0x0dcf0400), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3324, 0x04000000), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3368, 0x00041400), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3388, 0x3f8ddbff), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33ac, 0x00007001), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33b0, 0x00181900), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33c0, 0x00060A00), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33d0, 0x06200840), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a28, 0x01010101), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a2c, 0x040c0404), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a9c, 0x9000000a), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b1c, 0x03808033), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b34, 0x80000009), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3348, 0x022ddfff), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x334c, 0x00000001), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3358, 0x0001c000), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3380, 0x3f8ddbff), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3384, 0x0001c7e1), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x338c, 0x0001c7e1), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3398, 0x0001c000), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33a8, 0x00181900), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33dc, 0x00080000), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33e0, 0x00000001), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a20, 0x0000040c), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a24, 0x01010101), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a30, 0x01010101), - REG_PCI_RMW32(0xac, ~0x00200000, 0), - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x0410, 0x00000003), - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2618, 0x08000000), - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2300, 0x00000002), - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2600, 0x00000008), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33b4, 0x00007001), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3350, 0x022ddfff), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3354, 0x00000001), - /* Power Optimizer */ - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33d4, 0x08000000), - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33c8, 0x08000080), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b10, 0x0000883c), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b14, 0x1e0a4616), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b24, 0x40000005), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b20, 0x0005db01), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a80, 0x05145005), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a84, 0x00001005), - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33d4, 0x2fff2fb1), - REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33c8, 0x00008000), - REG_SCRIPT_END -}; - -static void pch_enable_mphy(void) -{ - u32 gpio71_native = gpio_is_native(71); - u32 data_and = 0xffffffff; - u32 data_or = (1 << 14) | (1 << 13) | (1 << 12); - - if (gpio71_native) { - data_or |= (1 << 0); - if (pch_is_wpt()) { - data_and &= ~((1 << 7) | (1 << 6) | (1 << 3)); - data_or |= (1 << 5) | (1 << 4); - - if (pch_is_wpt_ulx()) { - /* Check if SATA and USB3 MPHY are enabled */ - u32 strap19 = pch_read_soft_strap(19); - strap19 &= ((1 << 31) | (1 << 30)); - strap19 >>= 30; - if (strap19 == 3) { - data_or |= (1 << 3); - printk(BIOS_DEBUG, "Enable ULX MPHY PG " - "control in single domain\n"); - } else if (strap19 == 0) { - printk(BIOS_DEBUG, "Enable ULX MPHY PG " - "control in split domains\n"); - } else { - printk(BIOS_DEBUG, "Invalid PCH Soft " - "Strap 19 configuration\n"); - } - } else { - data_or |= (1 << 3); - } - } - } - - pch_iobp_update(0xCF000000, data_and, data_or); -} - -static void pch_init_deep_sx(struct device *dev) -{ - config_t *config = dev->chip_info; - - if (config->deep_sx_enable_ac) { - RCBA32_OR(DEEP_S3_POL, DEEP_S3_EN_AC); - RCBA32_OR(DEEP_S5_POL, DEEP_S5_EN_AC); - } - - if (config->deep_sx_enable_dc) { - RCBA32_OR(DEEP_S3_POL, DEEP_S3_EN_DC); - RCBA32_OR(DEEP_S5_POL, DEEP_S5_EN_DC); - } - - if (config->deep_sx_enable_ac || config->deep_sx_enable_dc) - RCBA32_OR(DEEP_SX_CONFIG, - DEEP_SX_WAKE_PIN_EN | DEEP_SX_GP27_PIN_EN); -} - -/* Power Management init */ -static void pch_pm_init(struct device *dev) -{ - printk(BIOS_DEBUG, "PCH PM init\n"); - - pch_init_deep_sx(dev); - - pch_enable_mphy(); - - reg_script_run_on_dev(dev, pch_pm_init_script); - - if (pch_is_wpt()) { - RCBA32_OR(0x33e0, (1 << 4) | (1 << 1)); - RCBA32_OR(0x2b1c, (1 << 22) | (1 << 14) | (1 << 13)); - RCBA32(0x33e4) = 0x16bf0002; - RCBA32_OR(0x33e4, 0x1); - } - - pch_iobp_update(0xCA000000, ~0UL, 0x00000009); - - /* Set RCBA 0x2b1c[29]=1 if DSP disabled */ - if (RCBA32(FD) & PCH_DISABLE_ADSPD) - RCBA32_OR(0x2b1c, (1 << 29)); - -} - -static void pch_cg_init(device_t dev) -{ - u32 reg32; - u16 reg16; - - /* DMI */ - RCBA32_OR(0x2234, 0xf); - - reg16 = pci_read_config16(dev, GEN_PMCON_1); - reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */ - if (pch_is_wpt()) - reg16 &= ~(1 << 11); - else - reg16 |= (1 << 11); - reg16 |= (1 << 5) | (1 << 6) | (1 << 7) | (1 << 12); - reg16 |= (1 << 2); // PCI CLKRUN# Enable - pci_write_config16(dev, GEN_PMCON_1, reg16); - - /* - * RCBA + 0x2614[27:25,14:13,10,8] = 101,11,1,1 - * RCBA + 0x2614[23:16] = 0x20 - * RCBA + 0x2614[30:28] = 0x0 - * RCBA + 0x2614[26] = 1 (IF 0:2.0@0x08 >= 0x0b) - */ - RCBA32_AND_OR(0x2614, ~0x64ff0000, 0x0a206500); - - /* Check for 0:2.0@0x08 >= 0x0b */ - if (pch_is_wpt() || pci_read_config8(SA_DEV_IGD, 0x8) >= 0x0b) - RCBA32_OR(0x2614, (1 << 26)); - - RCBA32_OR(0x900, 0x0000031f); - - reg32 = RCBA32(CG); - if (RCBA32(0x3454) & (1 << 4)) - reg32 &= ~(1 << 29); // LPC Dynamic - else - reg32 |= (1 << 29); // LPC Dynamic - reg32 |= (1 << 31); // LP LPC - reg32 |= (1 << 30); // LP BLA - if (RCBA32(0x3454) & (1 << 4)) - reg32 &= ~(1 << 29); - else - reg32 |= (1 << 29); - reg32 |= (1 << 28); // GPIO Dynamic - reg32 |= (1 << 27); // HPET Dynamic - reg32 |= (1 << 26); // Generic Platform Event Clock - if (RCBA32(BUC) & PCH_DISABLE_GBE) - reg32 |= (1 << 23); // GbE Static - if (RCBA32(FD) & PCH_DISABLE_HD_AUDIO) - reg32 |= (1 << 21); // HDA Static - reg32 |= (1 << 22); // HDA Dynamic - RCBA32(CG) = reg32; - - /* PCH-LP LPC */ - if (pch_is_wpt()) - RCBA32_AND_OR(0x3434, ~0x1f, 0x17); - else - RCBA32_OR(0x3434, 0x7); - - /* SPI */ - RCBA32_OR(0x38c0, 0x3c07); - - pch_iobp_update(0xCE00C000, ~1UL, 0x00000000); -} - -static void pch_set_acpi_mode(void) -{ -#if CONFIG_HAVE_SMI_HANDLER - if (!acpi_is_wakeup_s3()) { - printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); - outb(APM_CNT_ACPI_DISABLE, APM_CNT); - printk(BIOS_DEBUG, "done.\n"); - } -#endif /* CONFIG_HAVE_SMI_HANDLER */ -} - static void lpc_init(struct device *dev) { /* Legacy initialization */ isa_dma_init(); - pch_rtc_init(dev); reg_script_run_on_dev(dev, pch_misc_init_script); /* Interrupt configuration */ @@ -470,39 +166,25 @@ static void lpc_init(struct device *dev) pch_pirq_init(dev); setup_i8259(); i8259_configure_irq_trigger(9, 1); - - /* Initialize power management */ - pch_power_options(dev); - pch_pm_init(dev); - pch_cg_init(dev); - - pch_set_acpi_mode(); } static void pch_lpc_add_mmio_resources(device_t dev) { u32 reg; struct resource *res; - const u32 default_decode_base = IO_APIC_ADDR; - /* - * Just report all resources from IO-APIC base to 4GiB. Don't mark - * them reserved as that may upset the OS if this range is marked - * as reserved in the e820. + * As per the BWG, Chapter 5.9.1. "PCH BIOS component will reserve + * certain memory range as reserved range for BIOS usage. + * For this SOC, the range will be from 0FD000000h till FE7FFFFFh" + * Hence, use FD000000h as PCR_BASE */ - res = new_resource(dev, OIC); + const u32 default_decode_base = PCH_PCR_BASE_ADDRESS; + + res = new_resource(dev, PCI_BASE_ADDRESS_0); res->base = default_decode_base; res->size = 0 - default_decode_base; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - /* RCBA */ - if (RCBA_BASE_ADDRESS < default_decode_base) { - res = new_resource(dev, RCBA); - res->base = RCBA_BASE_ADDRESS; - res->size = 16 * 1024; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | - IORESOURCE_FIXED | IORESOURCE_RESERVE; - } + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | + IORESOURCE_FIXED | IORESOURCE_RESERVE; /* Check LPC Memory Decode register. */ reg = pci_read_config32(dev, LGMR); @@ -513,7 +195,7 @@ static void pch_lpc_add_mmio_resources(device_t dev) res->base = reg; res->size = 16 * 1024; res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | - IORESOURCE_FIXED | IORESOURCE_RESERVE; + IORESOURCE_FIXED | IORESOURCE_RESERVE; } } } @@ -558,7 +240,7 @@ static void pch_lpc_add_gen_io_resources(device_t dev, int reg_value, int index) { /* * Check if the register is enabled. If so and the base exceeds the - * device's default claim range add the resource. + * device's deafult claim range add the resoure. */ if (reg_value & 1) { u16 base = reg_value & 0xfffc; @@ -578,13 +260,6 @@ static void pch_lpc_add_io_resources(device_t dev) res->size = LPC_DEFAULT_IO_RANGE_UPPER - LPC_DEFAULT_IO_RANGE_LOWER; res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - /* GPIOBASE */ - pch_lpc_add_io_resource(dev, GPIO_BASE_ADDRESS, - GPIO_BASE_SIZE, GPIO_BASE); - - /* PMBASE */ - pch_lpc_add_io_resource(dev, ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, PMBASE); - /* LPC Generic IO Decode range. */ pch_lpc_add_gen_io_resources(dev, config->gen1_dec, LPC_GEN1_DEC); pch_lpc_add_gen_io_resources(dev, config->gen2_dec, LPC_GEN2_DEC); @@ -607,59 +282,26 @@ static void pch_lpc_read_resources(device_t dev) /* Allocate ACPI NVS in CBMEM */ gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof(global_nvs_t)); - if (!acpi_is_wakeup_s3() && gnvs) + if (acpi_slp_type != 3 && gnvs) memset(gnvs, 0, sizeof(global_nvs_t)); } -static void southcluster_inject_dsdt(void) -{ - global_nvs_t *gnvs; - - gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); - if (!gnvs) { - gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof (*gnvs)); - if (gnvs) - memset(gnvs, 0, sizeof(*gnvs)); - } - - if (gnvs) { - memset(gnvs, 0, sizeof(*gnvs)); - acpi_create_gnvs(gnvs); - acpi_save_gnvs((unsigned long)gnvs); - /* And tell SMI about it */ - smm_setup_structures(gnvs, NULL, NULL); - - /* Add it to DSDT. */ - acpigen_write_scope("\\"); - acpigen_write_name_dword("NVSA", (u32) gnvs); - acpigen_pop_len(); - } -} - static struct device_operations device_ops = { .read_resources = &pch_lpc_read_resources, .set_resources = &pci_dev_set_resources, .enable_resources = &pci_dev_enable_resources, .acpi_inject_dsdt_generator = southcluster_inject_dsdt, - .write_acpi_tables = acpi_write_hpet, + .write_acpi_tables = southcluster_write_acpi_tables, .init = &lpc_init, - .scan_bus = &scan_static_bus, - .ops_pci = &broadwell_pci_ops, + .scan_bus = &scan_lpc_bus, + .ops_pci = &soc_pci_ops, }; static const unsigned short pci_device_ids[] = { - PCH_LPT_LP_SAMPLE, - PCH_LPT_LP_PREMIUM, - PCH_LPT_LP_MAINSTREAM, - PCH_LPT_LP_VALUE, - PCH_WPT_HSW_U_SAMPLE, - PCH_WPT_BDW_U_SAMPLE, - PCH_WPT_BDW_U_PREMIUM, - PCH_WPT_BDW_U_BASE, - PCH_WPT_BDW_Y_SAMPLE, - PCH_WPT_BDW_Y_PREMIUM, - PCH_WPT_BDW_Y_BASE, - PCH_WPT_BDW_H, + PCH_SPT_LP_SAMPLE, + PCH_SPT_LP_U_BASE, + PCH_SPT_LP_U_PREMIUM, + PCH_SPT_LP_Y_PREMIUM, 0 }; diff --git a/src/soc/intel/skylake/me.c b/src/soc/intel/skylake/me.c deleted file mode 100644 index 3cac120..0000000 --- a/src/soc/intel/skylake/me.c +++ /dev/null @@ -1,1085 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * This is a ramstage driver for the Intel Management Engine found in the - * southbridge. It handles the required boot-time messages over the - * MMIO-based Management Engine Interface to tell the ME that the BIOS is - * finished with POST. Additional messages are defined for debug but are - * not used unless the console loglevel is high enough. - */ - -#include <arch/acpi.h> -#include <arch/io.h> -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_def.h> -#include <string.h> -#include <delay.h> -#include <elog.h> -#include <soc/me.h> -#include <soc/lpc.h> -#include <soc/pch.h> -#include <soc/pci_devs.h> -#include <soc/ramstage.h> -#include <soc/rcba.h> -#include <soc/intel/broadwell/chip.h> - -#if CONFIG_CHROMEOS -#include <vendorcode/google/chromeos/chromeos.h> -#include <vendorcode/google/chromeos/gnvs.h> -#endif - -/* Path that the BIOS should take based on ME state */ -static const char *me_bios_path_values[] = { - [ME_NORMAL_BIOS_PATH] = "Normal", - [ME_S3WAKE_BIOS_PATH] = "S3 Wake", - [ME_ERROR_BIOS_PATH] = "Error", - [ME_RECOVERY_BIOS_PATH] = "Recovery", - [ME_DISABLE_BIOS_PATH] = "Disable", - [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update", -}; - -/* MMIO base address for MEI interface */ -static u8 *mei_base_address; - -#if CONFIG_DEBUG_INTEL_ME -static void mei_dump(void *ptr, int dword, int offset, const char *type) -{ - struct mei_csr *csr; - - printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset); - - switch (offset) { - case MEI_H_CSR: - case MEI_ME_CSR_HA: - csr = ptr; - if (!csr) { - printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword); - break; - } - printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u " - "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth, - csr->buffer_read_ptr, csr->buffer_write_ptr, - csr->ready, csr->reset, csr->interrupt_generate, - csr->interrupt_status, csr->interrupt_enable); - break; - case MEI_ME_CB_RW: - case MEI_H_CB_WW: - printk(BIOS_SPEW, "CB: 0x%08x\n", dword); - break; - default: - printk(BIOS_SPEW, "0x%08x\n", offset); - break; - } -} -#else -# define mei_dump(ptr,dword,offset,type) do {} while (0) -#endif - -/* - * ME/MEI access helpers using memcpy to avoid aliasing. - */ - -static inline void mei_read_dword_ptr(void *ptr, int offset) -{ - u32 dword = read32(mei_base_address + offset); - memcpy(ptr, &dword, sizeof(dword)); - mei_dump(ptr, dword, offset, "READ"); -} - -static inline void mei_write_dword_ptr(void *ptr, int offset) -{ - u32 dword = 0; - memcpy(&dword, ptr, sizeof(dword)); - write32(mei_base_address + offset, dword); - mei_dump(ptr, dword, offset, "WRITE"); -} - -static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset) -{ - u32 dword = pci_read_config32(dev, offset); - memcpy(ptr, &dword, sizeof(dword)); - mei_dump(ptr, dword, offset, "PCI READ"); -} - -static inline void read_host_csr(struct mei_csr *csr) -{ - mei_read_dword_ptr(csr, MEI_H_CSR); -} - -static inline void write_host_csr(struct mei_csr *csr) -{ - mei_write_dword_ptr(csr, MEI_H_CSR); -} - -static inline void read_me_csr(struct mei_csr *csr) -{ - mei_read_dword_ptr(csr, MEI_ME_CSR_HA); -} - -static inline void write_cb(u32 dword) -{ - write32(mei_base_address + MEI_H_CB_WW, dword); - mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE"); -} - -static inline u32 read_cb(void) -{ - u32 dword = read32(mei_base_address + MEI_ME_CB_RW); - mei_dump(NULL, dword, MEI_ME_CB_RW, "READ"); - return dword; -} - -/* Wait for ME ready bit to be asserted */ -static int mei_wait_for_me_ready(void) -{ - struct mei_csr me; - unsigned try = ME_RETRY; - - while (try--) { - read_me_csr(&me); - if (me.ready) - return 0; - udelay(ME_DELAY); - } - - printk(BIOS_ERR, "ME: failed to become ready\n"); - return -1; -} - -static void mei_reset(void) -{ - struct mei_csr host; - - if (mei_wait_for_me_ready() < 0) - return; - - /* Reset host and ME circular buffers for next message */ - read_host_csr(&host); - host.reset = 1; - host.interrupt_generate = 1; - write_host_csr(&host); - - if (mei_wait_for_me_ready() < 0) - return; - - /* Re-init and indicate host is ready */ - read_host_csr(&host); - host.interrupt_generate = 1; - host.ready = 1; - host.reset = 0; - write_host_csr(&host); -} - -static int mei_send_packet(struct mei_header *mei, void *req_data) -{ - struct mei_csr host; - unsigned ndata, n; - u32 *data; - - /* Number of dwords to write */ - ndata = mei->length >> 2; - - /* Pad non-dword aligned request message length */ - if (mei->length & 3) - ndata++; - if (!ndata) { - printk(BIOS_DEBUG, "ME: request has no data\n"); - return -1; - } - ndata++; /* Add MEI header */ - - /* - * Make sure there is still room left in the circular buffer. - * Reset the buffer pointers if the requested message will not fit. - */ - read_host_csr(&host); - if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { - printk(BIOS_ERR, "ME: circular buffer full, resetting...\n"); - mei_reset(); - read_host_csr(&host); - } - - /* Ensure the requested length will fit in the circular buffer. */ - if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { - printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n", - ndata + 2, host.buffer_depth); - return -1; - } - - /* Write MEI header */ - mei_write_dword_ptr(mei, MEI_H_CB_WW); - ndata--; - - /* Write message data */ - data = req_data; - for (n = 0; n < ndata; ++n) - write_cb(*data++); - - /* Generate interrupt to the ME */ - read_host_csr(&host); - host.interrupt_generate = 1; - write_host_csr(&host); - - /* Make sure ME is ready after sending request data */ - return mei_wait_for_me_ready(); -} - -static int mei_send_data(u8 me_address, u8 host_address, - void *req_data, int req_bytes) -{ - struct mei_header header = { - .client_address = me_address, - .host_address = host_address, - }; - struct mei_csr host; - int current = 0; - u8 *req_ptr = req_data; - - while (!header.is_complete) { - int remain = req_bytes - current; - int buf_len; - - read_host_csr(&host); - buf_len = host.buffer_depth - host.buffer_write_ptr; - - if (buf_len > remain) { - /* Send all remaining data as final message */ - header.length = req_bytes - current; - header.is_complete = 1; - } else { - /* Send as much data as the buffer can hold */ - header.length = buf_len; - } - - mei_send_packet(&header, req_ptr); - - req_ptr += header.length; - current += header.length; - } - - return 0; -} - -static int mei_send_header(u8 me_address, u8 host_address, - void *header, int header_len, int complete) -{ - struct mei_header mei = { - .client_address = me_address, - .host_address = host_address, - .length = header_len, - .is_complete = complete, - }; - return mei_send_packet(&mei, header); -} - -static int mei_recv_msg(void *header, int header_bytes, - void *rsp_data, int rsp_bytes) -{ - struct mei_header mei_rsp; - struct mei_csr me, host; - unsigned ndata, n; - unsigned expected; - u32 *data; - - /* Total number of dwords to read from circular buffer */ - expected = (rsp_bytes + sizeof(mei_rsp) + header_bytes) >> 2; - if (rsp_bytes & 3) - expected++; - - if (mei_wait_for_me_ready() < 0) - return -1; - - /* - * The interrupt status bit does not appear to indicate that the - * message has actually been received. Instead we wait until the - * expected number of dwords are present in the circular buffer. - */ - for (n = ME_RETRY; n; --n) { - read_me_csr(&me); - if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected) - break; - udelay(ME_DELAY); - } - if (!n) { - printk(BIOS_ERR, "ME: timeout waiting for data: expected " - "%u, available %u\n", expected, - me.buffer_write_ptr - me.buffer_read_ptr); - return -1; - } - - /* Read and verify MEI response header from the ME */ - mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW); - if (!mei_rsp.is_complete) { - printk(BIOS_ERR, "ME: response is not complete\n"); - return -1; - } - - /* Handle non-dword responses and expect at least the header */ - ndata = mei_rsp.length >> 2; - if (mei_rsp.length & 3) - ndata++; - if (ndata != (expected - 1)) { - printk(BIOS_ERR, "ME: response is missing data %d != %d\n", - ndata, (expected - 1)); - return -1; - } - - /* Read response header from the ME */ - data = header; - for (n = 0; n < (header_bytes >> 2); ++n) - *data++ = read_cb(); - ndata -= header_bytes >> 2; - - /* Make sure caller passed a buffer with enough space */ - if (ndata != (rsp_bytes >> 2)) { - printk(BIOS_ERR, "ME: not enough room in response buffer: " - "%u != %u\n", ndata, rsp_bytes >> 2); - return -1; - } - - /* Read response data from the circular buffer */ - data = rsp_data; - for (n = 0; n < ndata; ++n) - *data++ = read_cb(); - - /* Tell the ME that we have consumed the response */ - read_host_csr(&host); - host.interrupt_status = 1; - host.interrupt_generate = 1; - write_host_csr(&host); - - return mei_wait_for_me_ready(); -} - -static inline int mei_sendrecv_mkhi(struct mkhi_header *mkhi, - void *req_data, int req_bytes, - void *rsp_data, int rsp_bytes) -{ - struct mkhi_header mkhi_rsp; - - /* Send header */ - if (mei_send_header(MEI_ADDRESS_MKHI, MEI_HOST_ADDRESS, - mkhi, sizeof(*mkhi), req_bytes ? 0 : 1) < 0) - return -1; - - /* Send data if available */ - if (req_bytes && mei_send_data(MEI_ADDRESS_MKHI, MEI_HOST_ADDRESS, - req_data, req_bytes) < 0) - return -1; - - /* Return now if no response expected */ - if (!rsp_bytes) - return 0; - - /* Read header and data */ - if (mei_recv_msg(&mkhi_rsp, sizeof(mkhi_rsp), - rsp_data, rsp_bytes) < 0) - return -1; - - if (!mkhi_rsp.is_response || - mkhi->group_id != mkhi_rsp.group_id || - mkhi->command != mkhi_rsp.command) { - printk(BIOS_ERR, "ME: invalid response, group %u ?= %u," - "command %u ?= %u, is_response %u\n", mkhi->group_id, - mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command, - mkhi_rsp.is_response); - return -1; - } - - return 0; -} - -static inline int mei_sendrecv_icc(struct icc_header *icc, - void *req_data, int req_bytes, - void *rsp_data, int rsp_bytes) -{ - struct icc_header icc_rsp; - - /* Send header */ - if (mei_send_header(MEI_ADDRESS_ICC, MEI_HOST_ADDRESS, - icc, sizeof(*icc), req_bytes ? 0 : 1) < 0) - return -1; - - /* Send data if available */ - if (req_bytes && mei_send_data(MEI_ADDRESS_ICC, MEI_HOST_ADDRESS, - req_data, req_bytes) < 0) - return -1; - - /* Read header and data, if needed */ - if (rsp_bytes && mei_recv_msg(&icc_rsp, sizeof(icc_rsp), - rsp_data, rsp_bytes) < 0) - return -1; - - return 0; -} - -/* - * mbp give up routine. This path is taken if hfs.mpb_rdy is 0 or the read - * state machine on the BIOS end doesn't match the ME's state machine. - */ -static void intel_me_mbp_give_up(device_t dev) -{ - struct mei_csr csr; - - pci_write_config32(dev, PCI_ME_H_GS2, PCI_ME_MBP_GIVE_UP); - - read_host_csr(&csr); - csr.reset = 1; - csr.interrupt_generate = 1; - write_host_csr(&csr); -} - -/* - * mbp clear routine. This will wait for the ME to indicate that - * the MBP has been read and cleared. - */ -static void intel_me_mbp_clear(device_t dev) -{ - int count; - struct me_hfs2 hfs2; - - /* Wait for the mbp_cleared indicator */ - for (count = ME_RETRY; count > 0; --count) { - pci_read_dword_ptr(dev, &hfs2, PCI_ME_HFS2); - if (hfs2.mbp_cleared) - break; - udelay(ME_DELAY); - } - - if (count == 0) { - printk(BIOS_WARNING, "ME: Timeout waiting for mbp_cleared\n"); - intel_me_mbp_give_up(dev); - } else { - printk(BIOS_INFO, "ME: MBP cleared\n"); - } -} - -static void me_print_fw_version(mbp_fw_version_name *vers_name) -{ - if (!vers_name) { - printk(BIOS_ERR, "ME: mbp missing version report\n"); - return; - } - - printk(BIOS_DEBUG, "ME: found version %d.%d.%d.%d\n", - vers_name->major_version, vers_name->minor_version, - vers_name->hotfix_version, vers_name->build_version); -} - -#if CONFIG_DEBUG_INTEL_ME -static inline void print_cap(const char *name, int state) -{ - printk(BIOS_DEBUG, "ME Capability: %-41s : %sabled\n", - name, state ? " en" : "dis"); -} - -/* Get ME Firmware Capabilities */ -static int mkhi_get_fwcaps(mbp_mefwcaps *cap) -{ - u32 rule_id = 0; - struct me_fwcaps cap_msg; - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_FWCAPS, - .command = MKHI_FWCAPS_GET_RULE, - }; - - /* Send request and wait for response */ - if (mei_sendrecv_mkhi(&mkhi, &rule_id, sizeof(u32), - &cap_msg, sizeof(cap_msg)) < 0) { - printk(BIOS_ERR, "ME: GET FWCAPS message failed\n"); - return -1; - } - *cap = cap_msg.caps_sku; - return 0; -} - -/* Get ME Firmware Capabilities */ -static void me_print_fwcaps(mbp_mefwcaps *cap) -{ - mbp_mefwcaps local_caps; - if (!cap) { - cap = &local_caps; - printk(BIOS_ERR, "ME: mbp missing fwcaps report\n"); - if (mkhi_get_fwcaps(cap)) - return; - } - - print_cap("Full Network manageability", cap->full_net); - print_cap("Regular Network manageability", cap->std_net); - print_cap("Manageability", cap->manageability); - print_cap("IntelR Anti-Theft (AT)", cap->intel_at); - print_cap("IntelR Capability Licensing Service (CLS)", cap->intel_cls); - print_cap("IntelR Power Sharing Technology (MPC)", cap->intel_mpc); - print_cap("ICC Over Clocking", cap->icc_over_clocking); - print_cap("Protected Audio Video Path (PAVP)", cap->pavp); - print_cap("IPV6", cap->ipv6); - print_cap("KVM Remote Control (KVM)", cap->kvm); - print_cap("Outbreak Containment Heuristic (OCH)", cap->och); - print_cap("Virtual LAN (VLAN)", cap->vlan); - print_cap("TLS", cap->tls); - print_cap("Wireless LAN (WLAN)", cap->wlan); -} -#endif - -/* Send END OF POST message to the ME */ -static int mkhi_end_of_post(void) -{ - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_GEN, - .command = MKHI_END_OF_POST, - }; - u32 eop_ack; - - /* Send request and wait for response */ - if (mei_sendrecv_mkhi(&mkhi, NULL, 0, &eop_ack, sizeof(eop_ack)) < 0) { - printk(BIOS_ERR, "ME: END OF POST message failed\n"); - return -1; - } - - printk(BIOS_INFO, "ME: END OF POST message successful (%d)\n", eop_ack); - return 0; -} - -/* Send END OF POST message to the ME */ -static int mkhi_end_of_post_noack(void) -{ - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_GEN, - .command = MKHI_END_OF_POST_NOACK, - }; - - /* Send request, do not wait for response */ - if (mei_sendrecv_mkhi(&mkhi, NULL, 0, NULL, 0) < 0) { - printk(BIOS_ERR, "ME: END OF POST NOACK message failed\n"); - return -1; - } - - printk(BIOS_INFO, "ME: END OF POST NOACK message successful\n"); - return 0; -} - -/* Send HMRFPO LOCK message to the ME */ -static int mkhi_hmrfpo_lock(void) -{ - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_HMRFPO, - .command = MKHI_HMRFPO_LOCK, - }; - u32 ack; - - /* Send request and wait for response */ - if (mei_sendrecv_mkhi(&mkhi, NULL, 0, &ack, sizeof(ack)) < 0) { - printk(BIOS_ERR, "ME: HMRFPO LOCK message failed\n"); - return -1; - } - - printk(BIOS_INFO, "ME: HMRPFO LOCK message successful (%d)\n", ack); - return 0; -} - -/* Send HMRFPO LOCK message to the ME, do not wait for response */ -static int mkhi_hmrfpo_lock_noack(void) -{ - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_HMRFPO, - .command = MKHI_HMRFPO_LOCK_NOACK, - }; - - /* Send request, do not wait for response */ - if (mei_sendrecv_mkhi(&mkhi, NULL, 0, NULL, 0) < 0) { - printk(BIOS_ERR, "ME: HMRFPO LOCK NOACK message failed\n"); - return -1; - } - - printk(BIOS_INFO, "ME: HMRPFO LOCK NOACK message successful\n"); - return 0; -} - -static void intel_me_finalize(device_t dev) -{ - u32 reg32; - - /* S3 path will have hidden this device already */ - if (!mei_base_address || mei_base_address == (u8*) 0xfffffff0) - return; - - /* Make sure IO is disabled */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 &= ~(PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | PCI_COMMAND_IO); - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* Hide the PCI device */ - RCBA32_OR(FD2, PCH_DISABLE_MEI1); - RCBA32(FD2); -} - -static int me_icc_set_clock_enables(u32 mask) -{ - struct icc_clock_enables_msg clk = { - .clock_enables = 0, /* Turn off specified clocks */ - .clock_mask = mask, - .no_response = 1, /* Do not expect response */ - }; - struct icc_header icc = { - .api_version = ICC_API_VERSION_LYNXPOINT, - .icc_command = ICC_SET_CLOCK_ENABLES, - .length = sizeof(clk), - }; - - /* Send request and wait for response */ - if (mei_sendrecv_icc(&icc, &clk, sizeof(clk), NULL, 0) < 0) { - printk(BIOS_ERR, "ME: ICC SET CLOCK ENABLES message failed\n"); - return -1; - } else { - printk(BIOS_INFO, "ME: ICC SET CLOCK ENABLES 0x%08x\n", mask); - } - - return 0; -} - -/* Determine the path that we should take based on ME status */ -static me_bios_path intel_me_path(device_t dev) -{ - me_bios_path path = ME_DISABLE_BIOS_PATH; - struct me_hfs hfs; - struct me_hfs2 hfs2; - - /* Check and dump status */ - intel_me_status(); - - pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS); - pci_read_dword_ptr(dev, &hfs2, PCI_ME_HFS2); - - /* Check Current Working State */ - switch (hfs.working_state) { - case ME_HFS_CWS_NORMAL: - path = ME_NORMAL_BIOS_PATH; - break; - case ME_HFS_CWS_REC: - path = ME_RECOVERY_BIOS_PATH; - break; - default: - path = ME_DISABLE_BIOS_PATH; - break; - } - - /* Check Current Operation Mode */ - switch (hfs.operation_mode) { - case ME_HFS_MODE_NORMAL: - break; - case ME_HFS_MODE_DEBUG: - case ME_HFS_MODE_DIS: - case ME_HFS_MODE_OVER_JMPR: - case ME_HFS_MODE_OVER_MEI: - default: - path = ME_DISABLE_BIOS_PATH; - break; - } - - /* Check for any error code and valid firmware and MBP */ - if (hfs.error_code || hfs.fpt_bad) - path = ME_ERROR_BIOS_PATH; - - /* Check if the MBP is ready */ - if (!hfs2.mbp_rdy) { - printk(BIOS_CRIT, "%s: mbp is not ready!\n", - __FUNCTION__); - path = ME_ERROR_BIOS_PATH; - } - -#if CONFIG_ELOG - if (path != ME_NORMAL_BIOS_PATH) { - struct elog_event_data_me_extended data = { - .current_working_state = hfs.working_state, - .operation_state = hfs.operation_state, - .operation_mode = hfs.operation_mode, - .error_code = hfs.error_code, - .progress_code = hfs2.progress_code, - .current_pmevent = hfs2.current_pmevent, - .current_state = hfs2.current_state, - }; - elog_add_event_byte(ELOG_TYPE_MANAGEMENT_ENGINE, path); - elog_add_event_raw(ELOG_TYPE_MANAGEMENT_ENGINE_EXT, - &data, sizeof(data)); - } -#endif - - return path; -} - -/* Prepare ME for MEI messages */ -static int intel_mei_setup(device_t dev) -{ - struct resource *res; - struct mei_csr host; - u32 reg32; - - /* Find the MMIO base for the ME interface */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (!res || res->base == 0 || res->size == 0) { - printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); - return -1; - } - mei_base_address = res2mmio(res, 0, 0); - - /* Ensure Memory and Bus Master bits are set */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* Clean up status for next message */ - read_host_csr(&host); - host.interrupt_generate = 1; - host.ready = 1; - host.reset = 0; - write_host_csr(&host); - - return 0; -} - -/* Read the Extend register hash of ME firmware */ -static int intel_me_extend_valid(device_t dev) -{ - struct me_heres status; - u32 extend[8] = {0}; - int i, count = 0; - - pci_read_dword_ptr(dev, &status, PCI_ME_HERES); - if (!status.extend_feature_present) { - printk(BIOS_ERR, "ME: Extend Feature not present\n"); - return -1; - } - - if (!status.extend_reg_valid) { - printk(BIOS_ERR, "ME: Extend Register not valid\n"); - return -1; - } - - switch (status.extend_reg_algorithm) { - case PCI_ME_EXT_SHA1: - count = 5; - printk(BIOS_DEBUG, "ME: Extend SHA-1: "); - break; - case PCI_ME_EXT_SHA256: - count = 8; - printk(BIOS_DEBUG, "ME: Extend SHA-256: "); - break; - default: - printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n", - status.extend_reg_algorithm); - return -1; - } - - for (i = 0; i < count; ++i) { - extend[i] = pci_read_config32(dev, PCI_ME_HER(i)); - printk(BIOS_DEBUG, "%08x", extend[i]); - } - printk(BIOS_DEBUG, "\n"); - -#if CONFIG_CHROMEOS - /* Save hash in NVS for the OS to verify */ - chromeos_set_me_hash(extend, count); -#endif - - return 0; -} - -static void intel_me_print_mbp(me_bios_payload *mbp_data) -{ - me_print_fw_version(mbp_data->fw_version_name); - -#if CONFIG_DEBUG_INTEL_ME - me_print_fwcaps(mbp_data->fw_capabilities); -#endif - - if (mbp_data->plat_time) { - printk(BIOS_DEBUG, "ME: Wake Event to ME Reset: %u ms\n", - mbp_data->plat_time->wake_event_mrst_time_ms); - printk(BIOS_DEBUG, "ME: ME Reset to Platform Reset: %u ms\n", - mbp_data->plat_time->mrst_pltrst_time_ms); - printk(BIOS_DEBUG, "ME: Platform Reset to CPU Reset: %u ms\n", - mbp_data->plat_time->pltrst_cpurst_time_ms); - } -} - -static u32 me_to_host_words_pending(void) -{ - struct mei_csr me; - read_me_csr(&me); - if (!me.ready) - return 0; - return (me.buffer_write_ptr - me.buffer_read_ptr) & - (me.buffer_depth - 1); -} - -struct mbp_payload { - mbp_header header; - u32 data[0]; -}; - -/* - * Read and print ME MBP data - * - * Return -1 to indicate a problem (give up) - * Return 0 to indicate success (send LOCK+EOP) - * Return 1 to indicate success (send LOCK+EOP with NOACK) - */ -static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev) -{ - mbp_header mbp_hdr; - u32 me2host_pending; - struct mei_csr host; - struct me_hfs2 hfs2; - struct mbp_payload *mbp; - int i; - int ret = 0; - - pci_read_dword_ptr(dev, &hfs2, PCI_ME_HFS2); - - if (!hfs2.mbp_rdy) { - printk(BIOS_ERR, "ME: MBP not ready\n"); - intel_me_mbp_give_up(dev); - return -1; - } - - me2host_pending = me_to_host_words_pending(); - if (!me2host_pending) { - printk(BIOS_ERR, "ME: no mbp data!\n"); - intel_me_mbp_give_up(dev); - return -1; - } - - /* we know for sure that at least the header is there */ - mei_read_dword_ptr(&mbp_hdr, MEI_ME_CB_RW); - - if ((mbp_hdr.num_entries > (mbp_hdr.mbp_size / 2)) || - (me2host_pending < mbp_hdr.mbp_size)) { - printk(BIOS_ERR, "ME: mbp of %d entries, total size %d words" - " buffer contains %d words\n", - mbp_hdr.num_entries, mbp_hdr.mbp_size, - me2host_pending); - intel_me_mbp_give_up(dev); - return -1; - } - mbp = malloc(mbp_hdr.mbp_size * sizeof(u32)); - if (!mbp) { - intel_me_mbp_give_up(dev); - return -1; - } - - mbp->header = mbp_hdr; - me2host_pending--; - - i = 0; - while (i != me2host_pending) { - mei_read_dword_ptr(&mbp->data[i], MEI_ME_CB_RW); - i++; - } - - read_host_csr(&host); - - /* Check that read and write pointers are equal. */ - if (host.buffer_read_ptr != host.buffer_write_ptr) { - printk(BIOS_INFO, "ME: MBP Read/Write pointer mismatch\n"); - printk(BIOS_INFO, "ME: MBP Waiting for MBP cleared flag\n"); - - /* Tell ME that the host has finished reading the MBP. */ - host.interrupt_generate = 1; - host.reset = 0; - write_host_csr(&host); - - /* Wait for the mbp_cleared indicator. */ - intel_me_mbp_clear(dev); - } else { - /* Indicate NOACK messages should be used. */ - ret = 1; - } - - /* Dump out the MBP contents. */ -#if CONFIG_DEBUG_INTEL_ME - printk(BIOS_INFO, "ME MBP: Header: items: %d, size dw: %d\n", - mbp->header.num_entries, mbp->header.mbp_size); - for (i = 0; i < mbp->header.mbp_size - 1; i++) { - printk(BIOS_INFO, "ME MBP: %04x: 0x%08x\n", i, mbp->data[i]); - } -#endif - -#define ASSIGN_FIELD_PTR(field_,val_) \ - { \ - mbp_data->field_ = (typeof(mbp_data->field_))(void *)val_; \ - break; \ - } - - /* Setup the pointers in the me_bios_payload structure. */ - for (i = 0; i < mbp->header.mbp_size - 1;) { - mbp_item_header *item = (void *)&mbp->data[i]; - - switch(MBP_MAKE_IDENT(item->app_id, item->item_id)) { - case MBP_IDENT(KERNEL, FW_VER): - ASSIGN_FIELD_PTR(fw_version_name, &mbp->data[i+1]); - - case MBP_IDENT(ICC, PROFILE): - ASSIGN_FIELD_PTR(icc_profile, &mbp->data[i+1]); - - case MBP_IDENT(INTEL_AT, STATE): - ASSIGN_FIELD_PTR(at_state, &mbp->data[i+1]); - - case MBP_IDENT(KERNEL, FW_CAP): - ASSIGN_FIELD_PTR(fw_capabilities, &mbp->data[i+1]); - - case MBP_IDENT(KERNEL, ROM_BIST): - ASSIGN_FIELD_PTR(rom_bist_data, &mbp->data[i+1]); - - case MBP_IDENT(KERNEL, PLAT_KEY): - ASSIGN_FIELD_PTR(platform_key, &mbp->data[i+1]); - - case MBP_IDENT(KERNEL, FW_TYPE): - ASSIGN_FIELD_PTR(fw_plat_type, &mbp->data[i+1]); - - case MBP_IDENT(KERNEL, MFS_FAILURE): - ASSIGN_FIELD_PTR(mfsintegrity, &mbp->data[i+1]); - - case MBP_IDENT(KERNEL, PLAT_TIME): - ASSIGN_FIELD_PTR(plat_time, &mbp->data[i+1]); - - case MBP_IDENT(NFC, SUPPORT_DATA): - ASSIGN_FIELD_PTR(nfc_data, &mbp->data[i+1]); - } - i += item->length; - } - #undef ASSIGN_FIELD_PTR - - return ret; -} - -/* Check whether ME is present and do basic init */ -static void intel_me_init(device_t dev) -{ - config_t *config = dev->chip_info; - me_bios_path path = intel_me_path(dev); - me_bios_payload mbp_data; - int mbp_ret; - struct me_hfs hfs; - struct mei_csr csr; - - /* Do initial setup and determine the BIOS path */ - printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]); - - if (path == ME_NORMAL_BIOS_PATH) { - /* Validate the extend register */ - intel_me_extend_valid(dev); -} - - memset(&mbp_data, 0, sizeof(mbp_data)); - - /* - * According to the ME9 BWG, BIOS is required to fetch MBP data in - * all boot flows except S3 Resume. - */ - - /* Prepare MEI MMIO interface */ - if (intel_mei_setup(dev) < 0) - return; - - /* Read ME MBP data */ - mbp_ret = intel_me_read_mbp(&mbp_data, dev); - if (mbp_ret < 0) - return; - intel_me_print_mbp(&mbp_data); - - /* Set clock enables according to devicetree */ - if (config && config->icc_clock_disable) - me_icc_set_clock_enables(config->icc_clock_disable); - - /* Make sure ME is in a mode that expects EOP */ - pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS); - - /* Abort and leave device alone if not normal mode */ - if (hfs.fpt_bad || - hfs.working_state != ME_HFS_CWS_NORMAL || - hfs.operation_mode != ME_HFS_MODE_NORMAL) - return; - - if (mbp_ret) { - /* - * MBP Cleared wait is skipped, - * Do not expect ACK and reset when complete. - */ - - /* Send HMRFPO Lock command, no response */ - mkhi_hmrfpo_lock_noack(); - - /* Send END OF POST command, no response */ - mkhi_end_of_post_noack(); - - /* Assert reset and interrupt */ - read_host_csr(&csr); - csr.interrupt_generate = 1; - csr.reset = 1; - write_host_csr(&csr); - } else { - /* - * MBP Cleared wait was not skipped - */ - - /* Send HMRFPO LOCK command */ - mkhi_hmrfpo_lock(); - - /* Send EOP command so ME stops accepting other commands */ - mkhi_end_of_post(); - } -} - -static void intel_me_enable(device_t dev) -{ -#if CONFIG_HAVE_ACPI_RESUME - /* Avoid talking to the device in S3 path */ - if (acpi_slp_type == 3) { - dev->enabled = 0; - pch_disable_devfn(dev); - } -#endif -} - -static struct device_operations device_ops = { - .read_resources = &pci_dev_read_resources, - .set_resources = &pci_dev_set_resources, - .enable_resources = &pci_dev_enable_resources, - .enable = &intel_me_enable, - .init = &intel_me_init, - .final = &intel_me_finalize, - .ops_pci = &broadwell_pci_ops, -}; - -static const unsigned short pci_device_ids[] = { - 0x9c3a, /* Low Power */ - 0x9cba, /* WildcatPoint */ - 0 -}; - -static const struct pci_driver intel_me __pci_driver = { - .ops = &device_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; diff --git a/src/soc/intel/skylake/me_status.c b/src/soc/intel/skylake/me_status.c deleted file mode 100644 index 867a9a9..0000000 --- a/src/soc/intel/skylake/me_status.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <stdlib.h> -#include <string.h> -#include <soc/pci_devs.h> -#include <soc/me.h> -#include <delay.h> - -static inline void me_read_dword_ptr(void *ptr, int offset) -{ - u32 dword = pci_read_config32(PCH_DEV_ME, offset); - memcpy(ptr, &dword, sizeof(dword)); -} - -#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) - -/* HFS1[3:0] Current Working State Values */ -static const char *me_cws_values[] = { - [ME_HFS_CWS_RESET] = "Reset", - [ME_HFS_CWS_INIT] = "Initializing", - [ME_HFS_CWS_REC] = "Recovery", - [3] = "Unknown (3)", - [4] = "Unknown (4)", - [ME_HFS_CWS_NORMAL] = "Normal", - [ME_HFS_CWS_WAIT] = "Platform Disable Wait", - [ME_HFS_CWS_TRANS] = "OP State Transition", - [ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In", - [9] = "Unknown (9)", - [10] = "Unknown (10)", - [11] = "Unknown (11)", - [12] = "Unknown (12)", - [13] = "Unknown (13)", - [14] = "Unknown (14)", - [15] = "Unknown (15)", -}; - -/* HFS1[8:6] Current Operation State Values */ -static const char *me_opstate_values[] = { - [ME_HFS_STATE_PREBOOT] = "Preboot", - [ME_HFS_STATE_M0_UMA] = "M0 with UMA", - [ME_HFS_STATE_M3] = "M3 without UMA", - [ME_HFS_STATE_M0] = "M0 without UMA", - [ME_HFS_STATE_BRINGUP] = "Bring up", - [ME_HFS_STATE_ERROR] = "M0 without UMA but with error" -}; - -/* HFS[19:16] Current Operation Mode Values */ -static const char *me_opmode_values[] = { - [ME_HFS_MODE_NORMAL] = "Normal", - [ME_HFS_MODE_DEBUG] = "Debug", - [ME_HFS_MODE_DIS] = "Soft Temporary Disable", - [ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper", - [ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message" -}; - -/* HFS[15:12] Error Code Values */ -static const char *me_error_values[] = { - [ME_HFS_ERROR_NONE] = "No Error", - [ME_HFS_ERROR_UNCAT] = "Uncategorized Failure", - [ME_HFS_ERROR_IMAGE] = "Image Failure", - [ME_HFS_ERROR_DEBUG] = "Debug Failure" -}; - -/* HFS2[31:28] ME Progress Code */ -static const char *me_progress_values[] = { - [ME_HFS2_PHASE_ROM] = "ROM Phase", - [ME_HFS2_PHASE_BUP] = "BUP Phase", - [ME_HFS2_PHASE_UKERNEL] = "uKernel Phase", - [ME_HFS2_PHASE_POLICY] = "Policy Module", - [ME_HFS2_PHASE_MODULE_LOAD] = "Module Loading", - [ME_HFS2_PHASE_UNKNOWN] = "Unknown", - [ME_HFS2_PHASE_HOST_COMM] = "Host Communication" -}; - -/* HFS2[27:24] Power Management Event */ -static const char *me_pmevent_values[] = { - [ME_HFS2_PMEVENT_CLEAN_MOFF_MX_WAKE] = - "Clean Moff->Mx wake", - [ME_HFS2_PMEVENT_MOFF_MX_WAKE_ERROR] = - "Moff->Mx wake after an error", - [ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET] = - "Clean global reset", - [ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET_ERROR] = - "Global reset after an error", - [ME_HFS2_PMEVENT_CLEAN_ME_RESET] = - "Clean Intel ME reset", - [ME_HFS2_PMEVENT_ME_RESET_EXCEPTION] = - "Intel ME reset due to exception", - [ME_HFS2_PMEVENT_PSEUDO_ME_RESET] = - "Pseudo-global reset", - [ME_HFS2_PMEVENT_S0MO_SXM3] = - "S0/M0->Sx/M3", - [ME_HFS2_PMEVENT_SXM3_S0M0] = - "Sx/M3->S0/M0", - [ME_HFS2_PMEVENT_NON_PWR_CYCLE_RESET] = - "Non-power cycle reset", - [ME_HFS2_PMEVENT_PWR_CYCLE_RESET_M3] = - "Power cycle reset through M3", - [ME_HFS2_PMEVENT_PWR_CYCLE_RESET_MOFF] = - "Power cycle reset through Moff", - [ME_HFS2_PMEVENT_SXMX_SXMOFF] = - "Sx/Mx->Sx/Moff" -}; - -/* Progress Code 0 states */ -static const char *me_progress_rom_values[] = { - [ME_HFS2_STATE_ROM_BEGIN] = "BEGIN", - [ME_HFS2_STATE_ROM_DISABLE] = "DISABLE" -}; - -/* Progress Code 1 states */ -static const char *me_progress_bup_values[] = { - [ME_HFS2_STATE_BUP_INIT] = - "Initialization starts", - [ME_HFS2_STATE_BUP_DIS_HOST_WAKE] = - "Disable the host wake event", - [ME_HFS2_STATE_BUP_FLOW_DET] = - "Flow determination start process", - [ME_HFS2_STATE_BUP_VSCC_ERR] = - "Error reading/matching the VSCC table in the descriptor", - [ME_HFS2_STATE_BUP_CHECK_STRAP] = - "Check to see if straps say ME DISABLED", - [ME_HFS2_STATE_BUP_PWR_OK_TIMEOUT] = - "Timeout waiting for PWROK", - [ME_HFS2_STATE_BUP_MANUF_OVRD_STRAP] = - "Possibly handle BUP manufacturing override strap", - [ME_HFS2_STATE_BUP_M3] = - "Bringup in M3", - [ME_HFS2_STATE_BUP_M0] = - "Bringup in M0", - [ME_HFS2_STATE_BUP_FLOW_DET_ERR] = - "Flow detection error", - [ME_HFS2_STATE_BUP_M3_CLK_ERR] = - "M3 clock switching error", - [ME_HFS2_STATE_BUP_CPU_RESET_DID_TIMEOUT_MEM_MISSING] = - "Host error - CPU reset timeout, DID timeout, memory missing", - [ME_HFS2_STATE_BUP_M3_KERN_LOAD] = - "M3 kernel load", - [ME_HFS2_STATE_BUP_T32_MISSING] = - "T34 missing - cannot program ICC", - [ME_HFS2_STATE_BUP_WAIT_DID] = - "Waiting for DID BIOS message", - [ME_HFS2_STATE_BUP_WAIT_DID_FAIL] = - "Waiting for DID BIOS message failure", - [ME_HFS2_STATE_BUP_DID_NO_FAIL] = - "DID reported no error", - [ME_HFS2_STATE_BUP_ENABLE_UMA] = - "Enabling UMA", - [ME_HFS2_STATE_BUP_ENABLE_UMA_ERR] = - "Enabling UMA error", - [ME_HFS2_STATE_BUP_SEND_DID_ACK] = - "Sending DID Ack to BIOS", - [ME_HFS2_STATE_BUP_SEND_DID_ACK_ERR] = - "Sending DID Ack to BIOS error", - [ME_HFS2_STATE_BUP_M0_CLK] = - "Switching clocks in M0", - [ME_HFS2_STATE_BUP_M0_CLK_ERR] = - "Switching clocks in M0 error", - [ME_HFS2_STATE_BUP_TEMP_DIS] = - "ME in temp disable", - [ME_HFS2_STATE_BUP_M0_KERN_LOAD] = - "M0 kernel load", -}; - -/* Progress Code 3 states */ -static const char *me_progress_policy_values[] = { - [ME_HFS2_STATE_POLICY_ENTRY] = "Entry into Policy Module", - [ME_HFS2_STATE_POLICY_RCVD_S3] = "Received S3 entry", - [ME_HFS2_STATE_POLICY_RCVD_S4] = "Received S4 entry", - [ME_HFS2_STATE_POLICY_RCVD_S5] = "Received S5 entry", - [ME_HFS2_STATE_POLICY_RCVD_UPD] = "Received UPD entry", - [ME_HFS2_STATE_POLICY_RCVD_PCR] = "Received PCR entry", - [ME_HFS2_STATE_POLICY_RCVD_NPCR] = "Received NPCR entry", - [ME_HFS2_STATE_POLICY_RCVD_HOST_WAKE] = "Received host wake", - [ME_HFS2_STATE_POLICY_RCVD_AC_DC] = "Received AC<>DC switch", - [ME_HFS2_STATE_POLICY_RCVD_DID] = "Received DRAM Init Done", - [ME_HFS2_STATE_POLICY_VSCC_NOT_FOUND] = - "VSCC Data not found for flash device", - [ME_HFS2_STATE_POLICY_VSCC_INVALID] = - "VSCC Table is not valid", - [ME_HFS2_STATE_POLICY_FPB_ERR] = - "Flash Partition Boundary is outside address space", - [ME_HFS2_STATE_POLICY_DESCRIPTOR_ERR] = - "ME cannot access the chipset descriptor region", - [ME_HFS2_STATE_POLICY_VSCC_NO_MATCH] = - "Required VSCC values for flash parts do not match", -}; - -void intel_me_status(void) -{ - struct me_hfs _hfs, *hfs = &_hfs; - struct me_hfs2 _hfs2, *hfs2 = &_hfs2; - - me_read_dword_ptr(hfs, PCI_ME_HFS); - me_read_dword_ptr(hfs2, PCI_ME_HFS2); - - /* Check Current States */ - printk(BIOS_DEBUG, "ME: FW Partition Table : %s\n", - hfs->fpt_bad ? "BAD" : "OK"); - printk(BIOS_DEBUG, "ME: Bringup Loader Failure : %s\n", - hfs->ft_bup_ld_flr ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Firmware Init Complete : %s\n", - hfs->fw_init_complete ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Manufacturing Mode : %s\n", - hfs->mfg_mode ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Boot Options Present : %s\n", - hfs->boot_options_present ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Update In Progress : %s\n", - hfs->update_in_progress ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Current Working State : %s\n", - me_cws_values[hfs->working_state]); - printk(BIOS_DEBUG, "ME: Current Operation State : %s\n", - me_opstate_values[hfs->operation_state]); - printk(BIOS_DEBUG, "ME: Current Operation Mode : %s\n", - me_opmode_values[hfs->operation_mode]); - printk(BIOS_DEBUG, "ME: Error Code : %s\n", - me_error_values[hfs->error_code]); - printk(BIOS_DEBUG, "ME: Progress Phase : %s\n", - me_progress_values[hfs2->progress_code]); - printk(BIOS_DEBUG, "ME: Power Management Event : %s\n", - me_pmevent_values[hfs2->current_pmevent]); - - printk(BIOS_DEBUG, "ME: Progress Phase State : "); - switch (hfs2->progress_code) { - case ME_HFS2_PHASE_ROM: /* ROM Phase */ - printk(BIOS_DEBUG, "%s", - me_progress_rom_values[hfs2->current_state]); - break; - - case ME_HFS2_PHASE_UKERNEL: /* uKernel Phase */ - printk(BIOS_DEBUG, "0x%02x", hfs2->current_state); - break; - - case ME_HFS2_PHASE_BUP: /* Bringup Phase */ - if (hfs2->current_state < ARRAY_SIZE(me_progress_bup_values) - && me_progress_bup_values[hfs2->current_state]) - printk(BIOS_DEBUG, "%s", - me_progress_bup_values[hfs2->current_state]); - else - printk(BIOS_DEBUG, "0x%02x", hfs2->current_state); - break; - - case ME_HFS2_PHASE_POLICY: /* Policy Module Phase */ - if (hfs2->current_state < ARRAY_SIZE(me_progress_policy_values) - && me_progress_policy_values[hfs2->current_state]) - printk(BIOS_DEBUG, "%s", - me_progress_policy_values[hfs2->current_state]); - else - printk(BIOS_DEBUG, "0x%02x", hfs2->current_state); - break; - - case ME_HFS2_PHASE_HOST_COMM: /* Host Communication Phase */ - if (!hfs2->current_state) - printk(BIOS_DEBUG, "Host communication established"); - else - printk(BIOS_DEBUG, "0x%02x", hfs2->current_state); - break; - - default: - printk(BIOS_DEBUG, "Unknown phase: 0x%02x state: 0x%02x", - hfs2->progress_code, hfs2->current_state); - } - printk(BIOS_DEBUG, "\n"); -} -#endif - -void intel_me_hsio_version(uint16_t *version, uint16_t *checksum) -{ - int count; - u32 hsiover; - struct me_hfs hfs; - - /* Query for HSIO version, overloads H_GS and HFS */ - pci_write_config32(PCH_DEV_ME, PCI_ME_H_GS, - ME_HSIO_MESSAGE | ME_HSIO_CMD_GETHSIOVER); - - /* Must wait for ME acknowledgement */ - for (count = ME_RETRY; count > 0; --count) { - me_read_dword_ptr(&hfs, PCI_ME_HFS); - if (hfs.bios_msg_ack) - break; - udelay(ME_DELAY); - } - if (!count) { - printk(BIOS_ERR, "ERROR: ME failed to respond\n"); - return; - } - - /* HSIO version should be in HFS_5 */ - hsiover = pci_read_config32(PCH_DEV_ME, PCI_ME_HFS5); - *version = hsiover >> 16; - *checksum = hsiover & 0xffff; - - printk(BIOS_DEBUG, "ME: HSIO Version : %d (CRC 0x%04x)\n", - *version, *checksum); - - /* Reset registers to normal behavior */ - pci_write_config32(PCH_DEV_ME, PCI_ME_H_GS, - ME_HSIO_MESSAGE | ME_HSIO_CMD_GETHSIOVER); -} diff --git a/src/soc/intel/skylake/memmap.c b/src/soc/intel/skylake/memmap.c index 7b8df28..860986b 100644 --- a/src/soc/intel/skylake/memmap.c +++ b/src/soc/intel/skylake/memmap.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,33 +15,88 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/io.h> #include <cbmem.h> #include <device/pci.h> #include <soc/pci_devs.h> +#include <soc/romstage.h> +#include <soc/smm.h> #include <soc/systemagent.h> -static uintptr_t dpr_region_start(void) +size_t mmap_region_granluarity(void) +{ +#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER) + /* Align to TSEG size when SMM is in use */ + if (CONFIG_SMM_TSEG_SIZE != 0) + return CONFIG_SMM_TSEG_SIZE; +#endif + + /* Make it 8MiB by default. */ + return 8 << 20; +} + +static void *smm_region_start(void) { /* - * Base of DPR is top of usable DRAM below 4GiB. The register has - * 1 MiB alignment and reports the TOP of the range, the base - * must be calculated from the size in MiB in bits 11:4. + * SMM base address matches the top of DPR. The DPR register has + * 1 MiB alignment and reports the TOP of the DPR range. */ - uintptr_t dpr = pci_read_config32(SA_DEV_ROOT, DPR); - uintptr_t tom = dpr & ~((1 << 20) - 1); - - /* Subtract DMA Protected Range size if enabled */ - if (dpr & DPR_EPM) - tom -= (dpr & DPR_SIZE_MASK) << 16; + uint32_t smm_base = pci_read_config32(SA_DEV_ROOT, DPR); + smm_base = ALIGN_DOWN(smm_base, 1 << 20); + return (void *)smm_base; +} - return tom; +void smm_region(void **start, size_t *size) +{ + *start = smm_region_start(); + *size = mmap_region_granluarity(); } void *cbmem_top(void) { - return (void *) dpr_region_start(); + /* + * +-------------------------+ Top of RAM (aligned) + * | System Management Mode | + * | code and data | Length: CONFIG_TSEG_SIZE + * | (TSEG) | + * +-------------------------+ SMM base (aligned) + * | | + * | Chipset Reserved Memory | Length: Multiple of CONFIG_TSEG_SIZE + * | | + * +-------------------------+ top_of_ram (aligned) + * | | + * | CBMEM Root | + * | | + * +-------------------------+ + * | | + * | FSP Reserved Memory | + * | | + * +-------------------------+ + * | | + * | Various CBMEM Entries | + * | | + * +-------------------------+ top_of_stack (8 byte aligned) + * | | + * | stack (CBMEM Entry) | + * | | + * +-------------------------+ + */ + + unsigned long top_of_ram = (unsigned long)smm_region_start(); + + /* + * Subtract DMA Protected Range size if enabled and align to a multiple + * of TSEG size. + */ + u32 dpr = pci_read_config32(SA_DEV_ROOT, DPR); + if (dpr & DPR_EPM) { + top_of_ram -= (dpr & DPR_SIZE_MASK) << 16; + top_of_ram = ALIGN_DOWN(top_of_ram, mmap_region_granluarity()); + } + + return (void *)(top_of_ram - CONFIG_CHIPSET_RESERVED_MEM_BYTES); } + diff --git a/src/soc/intel/skylake/microcode/Makefile.inc b/src/soc/intel/skylake/microcode/Makefile.inc index bf9e345..a5e8981 100644 --- a/src/soc/intel/skylake/microcode/Makefile.inc +++ b/src/soc/intel/skylake/microcode/Makefile.inc @@ -1 +1,13 @@ -cpu_microcode-y += microcode_blob.c +# Add CPU uCode source to list of files to build. +cpu_microcode-$(CONFIG_CPU_MICROCODE_CBFS_GENERATE) += microcode_blob.c + +# This section overrides the default build process for the microcode to place +# it at a known location in the CBFS. This only needs to be enabled if FSP is +# being used. +# Define the correct offset for the file in CBFS +fsp_ucode_cbfs_base = $(CONFIG_CPU_MICROCODE_CBFS_LOC) + +# Override the location that was supplied by the core code. +add-cpu-microcode-to-cbfs = \ + $(CBFSTOOL) $(1) add -n $(cpu_ucode_cbfs_name) -f $(cpu_ucode_cbfs_file) -t microcode -b $(fsp_ucode_cbfs_base) + diff --git a/src/soc/intel/skylake/microcode/microcode_blob.c b/src/soc/intel/skylake/microcode/microcode_blob.c index 4f06cb2..511c899 100644 --- a/src/soc/intel/skylake/microcode/microcode_blob.c +++ b/src/soc/intel/skylake/microcode/microcode_blob.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,10 +15,10 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -unsigned microcode[] = { -#include "../../../../../3rdparty/blobs/soc/intel/broadwell/microcode_blob.h" +unsigned int microcode[] = { +#include "microcode_blob.h" }; diff --git a/src/soc/intel/skylake/minihd.c b/src/soc/intel/skylake/minihd.c deleted file mode 100644 index ac5af8d..0000000 --- a/src/soc/intel/skylake/minihd.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <arch/io.h> -#include <delay.h> -#include <stdlib.h> -#include <soc/intel/common/hda_verb.h> -#include <soc/ramstage.h> - -static const u32 minihd_verb_table[] = { - /* coreboot specific header */ - 0x80862807, // Codec Vendor / Device ID: Intel Mini-HD - 0x00000000, // Subsystem ID - 0x00000004, // Number of jacks - - /* Enable 3rd Pin and Converter Widget */ - 0x00878101, - - /* Pin Widget 5 - PORT B */ - 0x00571C10, - 0x00571D00, - 0x00571E56, - 0x00571F18, - - /* Pin Widget 6 - PORT C */ - 0x00671C20, - 0x00671D00, - 0x00671E56, - 0x00671F18, - - /* Pin Widget 7 - PORT D */ - 0x00771C30, - 0x00771D00, - 0x00771E56, - 0x00771F18, - - /* Disable 3rd Pin and Converter Widget */ - 0x00878100, - - /* Dummy entries to fill out the table */ - 0x00878100, - 0x00878100, -}; - -static void minihd_init(struct device *dev) -{ - struct resource *res; - u8 *base, reg32; - int codec_mask, i; - - /* Find base address */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (!res) - return; - - base = res2mmio(res, 0, 0); - printk(BIOS_DEBUG, "Mini-HD: base = %p\n", base); - - /* Set Bus Master */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); - - /* Mini-HD configuration */ - reg32 = read32(base + 0x100c); - reg32 &= 0xfffc0000; - reg32 |= 0x4; - write32(base + 0x100c, reg32); - - reg32 = read32(base + 0x1010); - reg32 &= 0xfffc0000; - reg32 |= 0x4b; - write32(base + 0x1010, reg32); - - /* Init the codec and write the verb table */ - codec_mask = hda_codec_detect(base); - - if (codec_mask) { - for (i = 3; i >= 0; i--) { - if (codec_mask & (1 << i)) - hda_codec_init(base, i, - sizeof(minihd_verb_table), - minihd_verb_table); - } - } -} - -static struct device_operations minihd_ops = { - .read_resources = &pci_dev_read_resources, - .set_resources = &pci_dev_set_resources, - .enable_resources = &pci_dev_enable_resources, - .init = &minihd_init, - .ops_pci = &broadwell_pci_ops, -}; - -static const unsigned short pci_device_ids[] = { - 0x0a0c, /* Haswell */ - 0x160c, /* Broadwell */ - 0 -}; - -static const struct pci_driver minihd_driver __pci_driver = { - .ops = &minihd_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; diff --git a/src/soc/intel/skylake/monotonic_timer.c b/src/soc/intel/skylake/monotonic_timer.c index 39134ef..35ad911 100644 --- a/src/soc/intel/skylake/monotonic_timer.c +++ b/src/soc/intel/skylake/monotonic_timer.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <stdint.h> @@ -30,8 +31,10 @@ static struct monotonic_counter { static inline uint32_t read_counter_msr(void) { - /* Even though the MSR is 64-bit it is assumed that the hardware - * is polled frequently enough to only use the lower 32-bits. */ + /* + * Even though the MSR is 64-bit it is assumed that the hardware + * is polled frequently enough to only use the lower 32-bits. + */ msr_t counter_msr; counter_msr = rdmsr(MSR_COUNTER_24_MHZ); diff --git a/src/soc/intel/skylake/pch.c b/src/soc/intel/skylake/pch.c index ab546e8..8657402 100644 --- a/src/soc/intel/skylake/pch.c +++ b/src/soc/intel/skylake/pch.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <console/console.h> @@ -24,12 +25,9 @@ #include <device/device.h> #include <device/pci.h> #include <device/pci_def.h> -#include <soc/iobp.h> #include <soc/pch.h> #include <soc/pci_devs.h> #include <soc/ramstage.h> -#include <soc/rcba.h> -#include <soc/serialio.h> #include <soc/spi.h> u8 pch_revision(void) @@ -42,160 +40,43 @@ u16 pch_type(void) return pci_read_config16(PCH_DEV_LPC, PCI_DEVICE_ID); } -/* Return 1 if PCH type is WildcatPoint */ -int pch_is_wpt(void) +void *get_spi_bar(void) { - return ((pch_type() & 0xfff0) == 0x9cc0) ? 1 : 0; -} - -/* Return 1 if PCH type is WildcatPoint ULX */ -int pch_is_wpt_ulx(void) -{ - u16 lpcid = pch_type(); - - switch (lpcid) { - case PCH_WPT_BDW_Y_SAMPLE: - case PCH_WPT_BDW_Y_PREMIUM: - case PCH_WPT_BDW_Y_BASE: - return 1; - } - - return 0; + device_t dev = PCH_DEV_SPI; + uint32_t bar; + + bar = pci_read_config32(dev, PCH_SPI_BASE_ADDRESS); + /* Bits 31-12 are the base address as per EDS for SPI 1F/5, + * Don't care about 0-11 bit + */ + return (void *)(bar & ~(B_PCH_SPI_BAR0_MASK)); } u32 pch_read_soft_strap(int id) { - u32 fdoc; + uint32_t fdoc; + void *spibar = get_spi_bar(); - fdoc = SPIBAR32(SPIBAR_FDOC); + fdoc = read32(spibar + SPIBAR_FDOC); fdoc &= ~0x00007ffc; - SPIBAR32(SPIBAR_FDOC) = fdoc; + write32(spibar + SPIBAR_FDOC, fdoc); fdoc |= 0x00004000; fdoc |= id * 4; - SPIBAR32(SPIBAR_FDOC) = fdoc; - - return SPIBAR32(SPIBAR_FDOD); -} - -#ifndef __PRE_RAM__ + write32(spibar + SPIBAR_FDOC, fdoc); -/* Put device in D3Hot Power State */ -static void pch_enable_d3hot(device_t dev) -{ - u32 reg32 = pci_read_config32(dev, PCH_PCS); - reg32 |= PCH_PCS_PS_D3HOT; - pci_write_config32(dev, PCH_PCS, reg32); -} - -/* RCBA function disable and posting read to flush the transaction */ -static void rcba_function_disable(u32 reg, u32 bit) -{ - RCBA32_OR(reg, bit); - RCBA32(reg); -} - -/* Set bit in Function Disable register to hide this device */ -void pch_disable_devfn(device_t dev) -{ - switch (dev->path.pci.devfn) { - case PCH_DEVFN_ADSP: /* Audio DSP */ - rcba_function_disable(FD, PCH_DISABLE_ADSPD); - break; - case PCH_DEVFN_XHCI: /* XHCI */ - rcba_function_disable(FD, PCH_DISABLE_XHCI); - break; - case PCH_DEVFN_SDMA: /* DMA */ - pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS0, ~0UL, SIO_IOBP_FUNCDIS_DIS); - break; - case PCH_DEVFN_I2C0: /* I2C0 */ - pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS1, ~0UL, SIO_IOBP_FUNCDIS_DIS); - break; - case PCH_DEVFN_I2C1: /* I2C1 */ - pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS2, ~0UL, SIO_IOBP_FUNCDIS_DIS); - break; - case PCH_DEVFN_SPI0: /* SPI0 */ - pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS3, ~0UL, SIO_IOBP_FUNCDIS_DIS); - break; - case PCH_DEVFN_SPI1: /* SPI1 */ - pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS4, ~0UL, SIO_IOBP_FUNCDIS_DIS); - break; - case PCH_DEVFN_UART0: /* UART0 */ - pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS5, ~0UL, SIO_IOBP_FUNCDIS_DIS); - break; - case PCH_DEVFN_UART1: /* UART1 */ - pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS6, ~0UL, SIO_IOBP_FUNCDIS_DIS); - break; - case PCH_DEVFN_ME: /* MEI #1 */ - rcba_function_disable(FD2, PCH_DISABLE_MEI1); - break; - case PCH_DEVFN_ME_2: /* MEI #2 */ - rcba_function_disable(FD2, PCH_DISABLE_MEI2); - break; - case PCH_DEVFN_ME_IDER: /* IDE-R */ - rcba_function_disable(FD2, PCH_DISABLE_IDER); - break; - case PCH_DEVFN_ME_KT: /* KT */ - rcba_function_disable(FD2, PCH_DISABLE_KT); - break; - case PCH_DEVFN_SDIO: /* SDIO */ - pch_enable_d3hot(dev); - pch_iobp_update(SIO_IOBP_FUNCDIS7, ~0UL, SIO_IOBP_FUNCDIS_DIS); - break; - case PCH_DEVFN_GBE: /* Gigabit Ethernet */ - rcba_function_disable(BUC, PCH_DISABLE_GBE); - break; - case PCH_DEVFN_HDA: /* HD Audio Controller */ - rcba_function_disable(FD, PCH_DISABLE_HD_AUDIO); - break; - case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 0): /* PCI Express Root Port 1 */ - case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 1): /* PCI Express Root Port 2 */ - case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 2): /* PCI Express Root Port 3 */ - case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 3): /* PCI Express Root Port 4 */ - case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 4): /* PCI Express Root Port 5 */ - case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 5): /* PCI Express Root Port 6 */ - case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 6): /* PCI Express Root Port 7 */ - case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 7): /* PCI Express Root Port 8 */ - rcba_function_disable(FD, - PCH_DISABLE_PCIE(PCI_FUNC(dev->path.pci.devfn))); - break; - case PCH_DEVFN_EHCI: /* EHCI #1 */ - rcba_function_disable(FD, PCH_DISABLE_EHCI1); - break; - case PCH_DEVFN_LPC: /* LPC */ - rcba_function_disable(FD, PCH_DISABLE_LPC); - break; - case PCH_DEVFN_SATA: /* SATA #1 */ - rcba_function_disable(FD, PCH_DISABLE_SATA1); - break; - case PCH_DEVFN_SMBUS: /* SMBUS */ - rcba_function_disable(FD, PCH_DISABLE_SMBUS); - break; - case PCH_DEVFN_SATA2: /* SATA #2 */ - rcba_function_disable(FD, PCH_DISABLE_SATA2); - break; - case PCH_DEVFN_THERMAL: /* Thermal Subsystem */ - rcba_function_disable(FD, PCH_DISABLE_THERMAL); - break; - } + return read32(spibar + SPIBAR_FDOD); } -void broadwell_pch_enable_dev(device_t dev) +#if ENV_RAMSTAGE +void pch_enable_dev(device_t dev) { + /* FSP should implement routines to disable PCH IPs */ u32 reg32; /* These devices need special enable/disable handling */ switch (PCI_SLOT(dev->path.pci.devfn)) { case PCH_DEV_SLOT_PCIE: - case PCH_DEV_SLOT_EHCI: - case PCH_DEV_SLOT_HDA: return; } @@ -209,7 +90,6 @@ void broadwell_pch_enable_dev(device_t dev) pci_write_config32(dev, PCI_COMMAND, reg32); /* Disable this device if possible */ - pch_disable_devfn(dev); } else { /* Enable SERR */ reg32 = pci_read_config32(dev, PCI_COMMAND); diff --git a/src/soc/intel/skylake/pcie.c b/src/soc/intel/skylake/pcie.c index 895df93..dbe119a 100644 --- a/src/soc/intel/skylake/pcie.c +++ b/src/soc/intel/skylake/pcie.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,9 +16,10 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ +#include <chip.h> #include <console/console.h> #include <device/device.h> #include <device/pci.h> @@ -26,582 +28,11 @@ #include <device/pci_ids.h> #include <soc/gpio.h> #include <soc/lpc.h> -#include <soc/iobp.h> #include <soc/pch.h> #include <soc/pci_devs.h> -#include <soc/rcba.h> -#include <soc/intel/broadwell/chip.h> #include <soc/cpu.h> #include <delay.h> -static void pcie_update_cfg8(device_t dev, int reg, u8 mask, u8 or); -static void pcie_update_cfg(device_t dev, int reg, u32 mask, u32 or); - -/* Low Power variant has 6 root ports. */ -#define NUM_ROOT_PORTS 6 - -struct root_port_config { - /* RPFN is a write-once register so keep a copy until it is written */ - u32 orig_rpfn; - u32 new_rpfn; - u32 pin_ownership; - u32 strpfusecfg1; - u32 strpfusecfg2; - u32 strpfusecfg3; - u32 b0d28f0_32c; - u32 b0d28f4_32c; - u32 b0d28f5_32c; - int coalesce; - int gbe_port; - int num_ports; - device_t ports[NUM_ROOT_PORTS]; -}; - -static struct root_port_config rpc; - -static inline int root_port_is_first(device_t dev) -{ - return PCI_FUNC(dev->path.pci.devfn) == 0; -} - -static inline int root_port_is_last(device_t dev) -{ - return PCI_FUNC(dev->path.pci.devfn) == (rpc.num_ports - 1); -} - -/* Root ports are numbered 1..N in the documentation. */ -static inline int root_port_number(device_t dev) -{ - return PCI_FUNC(dev->path.pci.devfn) + 1; -} - -static void root_port_config_update_gbe_port(void) -{ - /* Is the Gbe Port enabled? */ - if (!((rpc.strpfusecfg1 >> 19) & 1)) - return; - - switch ((rpc.strpfusecfg1 >> 16) & 0x7) { - case 0: - rpc.gbe_port = 3; - break; - case 1: - rpc.gbe_port = 4; - break; - case 2: - case 3: - case 4: - case 5: - /* Lanes 0-4 of Root Port 5. */ - rpc.gbe_port = 5; - break; - default: - printk(BIOS_DEBUG, "Invalid GbE Port Selection.\n"); - } -} - -static void pcie_iosf_port_grant_count(device_t dev) -{ - u8 update_val; - u32 rpcd = (pci_read_config32(dev, 0xfc) > 14) & 0x3; - - switch (rpcd) { - case 1: - case 3: - update_val = 0x02; - break; - case 2: - update_val = 0x22; - break; - default: - update_val = 0x00; - break; - } - - RCBA32(0x103C) = (RCBA32(0x103C) & (~0xff)) | update_val; -} - -static void root_port_init_config(device_t dev) -{ - int rp; - u32 data; - u8 resp, id; - - if (root_port_is_first(dev)) { - rpc.orig_rpfn = RCBA32(RPFN); - rpc.new_rpfn = rpc.orig_rpfn; - rpc.num_ports = NUM_ROOT_PORTS; - rpc.gbe_port = -1; - /* RP0 f5[3:0] = 0101b*/ - pcie_update_cfg8(dev, 0xf5, ~0xa, 0x5); - - pcie_iosf_port_grant_count(dev); - - rpc.pin_ownership = pci_read_config32(dev, 0x410); - root_port_config_update_gbe_port(); - - pcie_update_cfg8(dev, 0xe2, ~(3 << 4), (3 << 4)); - if (dev->chip_info != NULL) { - config_t *config = dev->chip_info; - rpc.coalesce = config->pcie_port_coalesce; - } - } - - rp = root_port_number(dev); - if (rp > rpc.num_ports) { - printk(BIOS_ERR, "Found Root Port %d, expecting %d\n", - rp, rpc.num_ports); - return; - } - - /* Read the fuse configuration and pin ownership. */ - switch (rp) { - case 1: - rpc.strpfusecfg1 = pci_read_config32(dev, 0xfc); - rpc.b0d28f0_32c = pci_read_config32(dev, 0x32c); - break; - case 5: - rpc.strpfusecfg2 = pci_read_config32(dev, 0xfc); - rpc.b0d28f4_32c = pci_read_config32(dev, 0x32c); - break; - case 6: - rpc.b0d28f5_32c = pci_read_config32(dev, 0x32c); - rpc.strpfusecfg3 = pci_read_config32(dev, 0xfc); - break; - default: - break; - } - - pcie_update_cfg(dev, 0x418, 0, 0x02000430); - - if (root_port_is_first(dev)) { - /* - * set RP0 PCICFG E2h[5:4] = 11b and E1h[6] = 1 - * before configuring ASPM - */ - id = 0xe0 + (u8)(RCBA32(RPFN) & 0x07); - pch_iobp_exec(0xE00000E0, IOBP_PCICFG_READ, id, &data, &resp); - data |= ((0x30 << 16) | (0x40 << 8)); - pch_iobp_exec(0xE00000E0, IOBP_PCICFG_WRITE, id, &data, &resp); - } - - /* Cache pci device. */ - rpc.ports[rp - 1] = dev; -} - -/* Update devicetree with new Root Port function number assignment */ -static void pch_pcie_device_set_func(int index, int pci_func) -{ - device_t dev; - unsigned new_devfn; - - dev = rpc.ports[index]; - - /* Set the new PCI function field for this Root Port. */ - rpc.new_rpfn &= ~RPFN_FNMASK(index); - rpc.new_rpfn |= RPFN_FNSET(index, pci_func); - - /* Determine the new devfn for this port */ - new_devfn = PCI_DEVFN(PCH_DEV_SLOT_PCIE, pci_func); - - if (dev->path.pci.devfn != new_devfn) { - printk(BIOS_DEBUG, - "PCH: PCIe map %02x.%1x -> %02x.%1x\n", - PCI_SLOT(dev->path.pci.devfn), - PCI_FUNC(dev->path.pci.devfn), - PCI_SLOT(new_devfn), PCI_FUNC(new_devfn)); - - dev->path.pci.devfn = new_devfn; - } -} - -static void pcie_enable_clock_gating(void) -{ - int i; - int enabled_ports = 0; - int is_broadwell = !!(cpu_family_model() == BROADWELL_FAMILY_ULT); - - for (i = 0; i < rpc.num_ports; i++) { - device_t dev; - int rp; - - dev = rpc.ports[i]; - rp = root_port_number(dev); - - if (!dev->enabled) { - /* Configure shared resource clock gating. */ - if (rp == 1 || rp == 5 || rp == 6) - pcie_update_cfg8(dev, 0xe1, 0xc3, 0x3c); - - pcie_update_cfg8(dev, 0xe2, ~(3 << 4), (3 << 4)); - pcie_update_cfg(dev, 0x420, ~(1 << 31), (1 << 31)); - - /* Per-Port CLKREQ# handling. */ - if (gpio_is_native(18 + rp - 1)) - pcie_update_cfg(dev, 0x420, ~0, (3 << 29)); - - /* Enable static clock gating. */ - if (rp == 1 && !rpc.ports[1]->enabled && - !rpc.ports[2]->enabled && !rpc.ports[3]->enabled) { - pcie_update_cfg8(dev, 0xe2, ~1, 1); - pcie_update_cfg8(dev, 0xe1, 0x7f, 0x80); - } else if (rp == 5 || rp == 6) { - pcie_update_cfg8(dev, 0xe2, ~1, 1); - pcie_update_cfg8(dev, 0xe1, 0x7f, 0x80); - } - continue; - } - - enabled_ports++; - - /* Enable dynamic clock gating. */ - pcie_update_cfg8(dev, 0xe1, 0xfc, 0x03); - pcie_update_cfg8(dev, 0xe2, ~(1 << 6), (1 << 6)); - pcie_update_cfg8(dev, 0xe8, ~(3 << 2), (2 << 2)); - - /* Update PECR1 register. */ - pcie_update_cfg8(dev, 0xe8, ~0, 3); - if (is_broadwell) { - pcie_update_cfg(dev, 0x324, ~((1 << 5) | (1 << 14)), - ((1 << 5) | (1 << 14))); - } else { - pcie_update_cfg(dev, 0x324, ~(1 << 5), (1 << 5)); - } - /* Per-Port CLKREQ# handling. */ - if (gpio_is_native(18 + rp - 1)) - /* - * In addition to D28Fx PCICFG 420h[30:29] = 11b, - * set 420h[17] = 0b and 420[0] = 1b for L1 SubState. - */ - pcie_update_cfg(dev, 0x420, ~0x20000, (3 << 29) | 1); - - /* Configure shared resource clock gating. */ - if (rp == 1 || rp == 5 || rp == 6) - pcie_update_cfg8(dev, 0xe1, 0xc3, 0x3c); - - /* CLKREQ# VR Idle Enable */ - RCBA32_OR(0x2b1c, (1 << (16 + i))); - } - - if (!enabled_ports) - pcie_update_cfg8(rpc.ports[0], 0xe1, ~(1 << 6), (1 << 6)); -} - -static void root_port_commit_config(void) -{ - int i; - - /* If the first root port is disabled the coalesce ports. */ - if (!rpc.ports[0]->enabled) - rpc.coalesce = 1; - - /* Perform clock gating configuration. */ - pcie_enable_clock_gating(); - - for (i = 0; i < rpc.num_ports; i++) { - device_t dev; - u32 reg32; - int n = 0; - - dev = rpc.ports[i]; - - if (dev == NULL) { - printk(BIOS_ERR, "Root Port %d device is NULL?\n", i+1); - continue; - } - - if (dev->enabled) - continue; - - printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev)); - - /* 8.2 Configuration of PCI Express Root Ports */ - pcie_update_cfg(dev, 0x338, ~(1 << 26), 1 << 26); - - do { - reg32 = pci_read_config32(dev, 0x328); - n++; - if (((reg32 & 0xff000000) == 0x01000000) || (n > 50)) - break; - udelay(100); - } while (1); - - if (n > 50) - printk(BIOS_DEBUG, "%s: Timeout waiting for 328h\n", - dev_path(dev)); - - pcie_update_cfg(dev, 0x408, ~(1 << 27), 1 << 27); - - /* Disable this device if possible */ - pch_disable_devfn(dev); - } - - if (rpc.coalesce) { - int current_func; - - /* For all Root Ports N enabled ports get assigned the lower - * PCI function number. The disabled ones get upper PCI - * function numbers. */ - current_func = 0; - for (i = 0; i < rpc.num_ports; i++) { - if (!rpc.ports[i]->enabled) - continue; - pch_pcie_device_set_func(i, current_func); - current_func++; - } - - /* Allocate the disabled devices' PCI function number. */ - for (i = 0; i < rpc.num_ports; i++) { - if (rpc.ports[i]->enabled) - continue; - pch_pcie_device_set_func(i, current_func); - current_func++; - } - } - - printk(BIOS_SPEW, "PCH: RPFN 0x%08x -> 0x%08x\n", - rpc.orig_rpfn, rpc.new_rpfn); - RCBA32(RPFN) = rpc.new_rpfn; -} - -static void root_port_mark_disable(device_t dev) -{ - /* Mark device as disabled. */ - dev->enabled = 0; - /* Mark device to be hidden. */ - rpc.new_rpfn |= RPFN_HIDE(PCI_FUNC(dev->path.pci.devfn)); -} - -static void root_port_check_disable(device_t dev) -{ - int rp; - - /* Device already disabled. */ - if (!dev->enabled) { - root_port_mark_disable(dev); - return; - } - - rp = root_port_number(dev); - - /* Is the GbE port mapped to this Root Port? */ - if (rp == rpc.gbe_port) { - root_port_mark_disable(dev); - return; - } - - /* Check Root Port Configuration. */ - switch (rp) { - case 2: - /* Root Port 2 is disabled for all lane configurations - * but config 00b (4x1 links). */ - if ((rpc.strpfusecfg1 >> 14) & 0x3) { - root_port_mark_disable(dev); - return; - } - break; - case 3: - /* Root Port 3 is disabled in config 11b (1x4 links). */ - if (((rpc.strpfusecfg1 >> 14) & 0x3) == 0x3) { - root_port_mark_disable(dev); - return; - } - break; - case 4: - /* Root Port 4 is disabled in configs 11b (1x4 links) - * and 10b (2x2 links). */ - if ((rpc.strpfusecfg1 >> 14) & 0x2) { - root_port_mark_disable(dev); - return; - } - break; - } - - /* Check Pin Ownership. */ - switch (rp) { - case 1: - /* Bit 0 is Root Port 1 ownership. */ - if ((rpc.pin_ownership & 0x1) == 0) { - root_port_mark_disable(dev); - return; - } - break; - case 2: - /* Bit 2 is Root Port 2 ownership. */ - if ((rpc.pin_ownership & 0x4) == 0) { - root_port_mark_disable(dev); - return; - } - break; - case 6: - /* Bits 7:4 are Root Port 6 pin-lane ownership. */ - if ((rpc.pin_ownership & 0xf0) == 0) { - root_port_mark_disable(dev); - return; - } - break; - } -} - -static void pcie_update_cfg8(device_t dev, int reg, u8 mask, u8 or) -{ - u8 reg8; - - reg8 = pci_read_config8(dev, reg); - reg8 &= mask; - reg8 |= or; - pci_write_config8(dev, reg, reg8); -} - -static void pcie_update_cfg(device_t dev, int reg, u32 mask, u32 or) -{ - u32 reg32; - - reg32 = pci_read_config32(dev, reg); - reg32 &= mask; - reg32 |= or; - pci_write_config32(dev, reg, reg32); -} - -static void pcie_add_0x0202000_iobp(u32 reg) -{ - u32 reg32; - - reg32 = pch_iobp_read(reg); - reg32 += (0x2 << 16) | (0x2 << 8); - pch_iobp_write(reg, reg32); -} - -static void pch_pcie_early(struct device *dev) -{ - config_t *config = dev->chip_info; - int do_aspm = 0; - int rp = root_port_number(dev); - - switch (rp) { - case 1: - case 2: - case 3: - case 4: - /* - * Bits 31:28 of b0d28f0 0x32c register correspond to - * Root Ports 4:1. - */ - do_aspm = !!(rpc.b0d28f0_32c & (1 << (28 + rp - 1))); - break; - case 5: - /* - * Bit 28 of b0d28f4 0x32c register correspond to - * Root Ports 4:1. - */ - do_aspm = !!(rpc.b0d28f4_32c & (1 << 28)); - break; - case 6: - /* - * Bit 28 of b0d28f5 0x32c register correspond to - * Root Ports 4:1. - */ - do_aspm = !!(rpc.b0d28f5_32c & (1 << 28)); - break; - } - - /* Allow ASPM to be forced on in devicetree */ - if (config && (config->pcie_port_force_aspm & (1 << (rp - 1)))) - do_aspm = 1; - - printk(BIOS_DEBUG, "PCIe Root Port %d ASPM is %sabled\n", - rp, do_aspm ? "en" : "dis"); - - if (do_aspm) { - /* Set ASPM bits in MPC2 register. */ - pcie_update_cfg(dev, 0xd4, ~(0x3 << 2), (1 << 4) | (0x2 << 2)); - - /* Set unique clock exit latency in MPC register. */ - pcie_update_cfg(dev, 0xd8, ~(0x7 << 18), (0x7 << 18)); - - switch (rp) { - case 1: - pcie_add_0x0202000_iobp(0xe9002440); - break; - case 2: - pcie_add_0x0202000_iobp(0xe9002640); - break; - case 3: - pcie_add_0x0202000_iobp(0xe9000840); - break; - case 4: - pcie_add_0x0202000_iobp(0xe9000a40); - break; - case 5: - pcie_add_0x0202000_iobp(0xe9000c40); - pcie_add_0x0202000_iobp(0xe9000e40); - pcie_add_0x0202000_iobp(0xe9001040); - pcie_add_0x0202000_iobp(0xe9001240); - break; - case 6: - /* Update IOBP based on lane ownership. */ - if (rpc.pin_ownership & (1 << 4)) - pcie_add_0x0202000_iobp(0xea002040); - if (rpc.pin_ownership & (1 << 5)) - pcie_add_0x0202000_iobp(0xea002240); - if (rpc.pin_ownership & (1 << 6)) - pcie_add_0x0202000_iobp(0xea002440); - if (rpc.pin_ownership & (1 << 7)) - pcie_add_0x0202000_iobp(0xea002640); - break; - } - - pcie_update_cfg(dev, 0x338, ~(1 << 26), 0); - } - - /* Enable LTR in Root Port. Disable OBFF. */ - pcie_update_cfg(dev, 0x64, ~(1 << 11) & ~(3 << 18), (1 << 11)); - pcie_update_cfg(dev, 0x68, ~(1 << 10), (1 << 10)); - - pcie_update_cfg(dev, 0x318, ~(0xffff << 16), (0x1414 << 16)); - - /* Set L1 exit latency in LCAP register. */ - if (!do_aspm && (pci_read_config8(dev, 0xf5) & 0x1)) - pcie_update_cfg(dev, 0x4c, ~(0x7 << 15), (0x4 << 15)); - else - pcie_update_cfg(dev, 0x4c, ~(0x7 << 15), (0x2 << 15)); - - pcie_update_cfg(dev, 0x314, 0x0, 0x743a361b); - - /* Set Common Clock Exit Latency in MPC register. */ - pcie_update_cfg(dev, 0xd8, ~(0x7 << 15), (0x3 << 15)); - - pcie_update_cfg(dev, 0x33c, ~0x00ffffff, 0x854d74); - - /* Set Invalid Receive Range Check Enable in MPC register. */ - pcie_update_cfg(dev, 0xd8, ~0, (1 << 25)); - - pcie_update_cfg8(dev, 0xf5, 0x0f, 0); - - /* Set AER Extended Cap ID to 01h and Next Cap Pointer to 200h. */ - pcie_update_cfg(dev, 0x100, ~(1 << 29) & ~0xfffff, (1 << 29) | 0x10001); - - /* Set L1 Sub-State Cap ID to 1Eh and Next Cap Pointer to None. */ - pcie_update_cfg(dev, 0x200, ~0xffff, 0x001e); - - pcie_update_cfg(dev, 0x320, ~(3 << 20) & ~(7 << 6), - (1 << 20) | (3 << 6)); - /* Enable Relaxed Order from Root Port. */ - pcie_update_cfg(dev, 0x320, ~(3 << 23), (3 << 23)); - - if (rp == 1 || rp == 5 || rp == 6) - pcie_update_cfg8(dev, 0xf7, ~0xc, 0); - - /* Set EOI forwarding disable. */ - pcie_update_cfg(dev, 0xd4, ~0, (1 << 1)); - - /* Read and write back write-once capability registers. */ - pcie_update_cfg(dev, 0x34, ~0, 0); - pcie_update_cfg(dev, 0x40, ~0, 0); - pcie_update_cfg(dev, 0x80, ~0, 0); - pcie_update_cfg(dev, 0x90, ~0, 0); -} - static void pch_pcie_init(struct device *dev) { u16 reg16; @@ -645,43 +76,13 @@ static void pch_pcie_init(struct device *dev) pci_write_config16(dev, 0x1e, reg16); } -static void pch_pcie_enable(device_t dev) -{ - /* Add this device to the root port config structure. */ - root_port_init_config(dev); - - /* Check to see if this Root Port should be disabled. */ - root_port_check_disable(dev); - - /* Power Management init before enumeration */ - if (dev->enabled) - pch_pcie_early(dev); - - /* - * When processing the last PCIe root port we can now - * update the Root Port Function Number and Hide register. - */ - if (root_port_is_last(dev)) - root_port_commit_config(); -} - -static void pcie_set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - /* NOTE: This is not the default position! */ - if (!vendor || !device) - pci_write_config32(dev, 0x94, pci_read_config32(dev, 0)); - else - pci_write_config32(dev, 0x94, (device << 16) | vendor); -} - static void pcie_set_L1_ss_max_latency(device_t dev, unsigned int off) { - /* Set max snoop and non-snoop latency for Broadwell */ + /* Set max snoop and non-snoop latency for the SOC */ pci_mmio_write_config32(dev, off, 0x10031003); } static struct pci_operations pcie_ops = { - .set_subsystem = pcie_set_subsystem, .set_L1_ss_latency = pcie_set_L1_ss_max_latency, }; @@ -690,16 +91,15 @@ static struct device_operations device_ops = { .set_resources = pci_dev_set_resources, .enable_resources = pci_bus_enable_resources, .init = pch_pcie_init, - .enable = pch_pcie_enable, + .enable = NULL, .scan_bus = pciexp_scan_bridge, .ops_pci = &pcie_ops, }; static const unsigned short pcie_device_ids[] = { - /* Lynxpoint-LP */ - 0x9c10, 0x9c12, 0x9c14, 0x9c16, 0x9c18, 0x9c1a, - /* WildcatPoint */ - 0x9c90, 0x9c92, 0x9c94, 0x9c96, 0x9c98, 0x9c9a, 0x2448, + /* Sunrisepoint-LP */ + 0x9d10, 0x9d11, 0x9d12, 0x9d13, 0x9d14, 0x9d15, 0x9d16, 0x9d17, + 0x9d18, 0x9d19, 0x9d1a, 0x9d1b, 0 }; diff --git a/src/soc/intel/skylake/pcr.c b/src/soc/intel/skylake/pcr.c new file mode 100644 index 0000000..33d6cd1 --- /dev/null +++ b/src/soc/intel/skylake/pcr.c @@ -0,0 +1,162 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <soc/pcr.h> +#include <soc/iomap.h> +#include <console/console.h> + +/* + * Read PCR register. (This is internal function) + * It returns PCR register and size in 1/2/4 bytes. + * The offset should not exceed 0xFFFF and must be aligned with size + * + * PCH_SBI_PID defines as 8 bit Port ID that will be used when sending + * transaction to sideband. + */ +static u8 pch_pcr_read(PCH_SBI_PID pid, u16 offset, u32 size, void *data) +{ + if ((offset & (size - 1)) != 0) { + printk(BIOS_DEBUG, + "PchPcrRead error. Invalid Offset: %x Size: %x", + offset, size); + return -1; + } + switch (size) { + case 4: + *(u32 *) data = read32(PCH_PCR_ADDRESS(pid, offset)); + break; + case 2: + *(u16 *) data = read16(PCH_PCR_ADDRESS(pid, offset)); + break; + case 1: + *(u8 *) data = read8(PCH_PCR_ADDRESS(pid, offset)); + break; + default: + break; + } + return 0; +} + +u8 pcr_read32(PCH_SBI_PID pid, u16 offset, u32 *outdata) +{ + return pch_pcr_read(pid, offset, sizeof(u32), (u32 *)outdata); +} + +u8 pcr_read16(PCH_SBI_PID pid, u16 offset, u16 *outdata) +{ + return pch_pcr_read(pid, offset, sizeof(u16), (u32 *)outdata); +} + +u8 pcr_read8(PCH_SBI_PID pid, u16 offset, u8 *outdata) +{ + return pch_pcr_read(pid, offset, sizeof(u8), (u32 *)outdata); +} + +/* + * Write PCR register. (This is internal function) + * It returns PCR register and size in 1/2/4 bytes. + * The offset should not exceed 0xFFFF and must be aligned with size + * + * PCH_SBI_PID defines as 8 bit Port ID that will be used when sending + * transaction to sideband. + */ +static u8 pch_pcr_write(PCH_SBI_PID pid, u16 offset, u32 size, u32 data) +{ + if ((offset & (size - 1)) != 0) { + printk(BIOS_DEBUG, + "PchPcrWrite error. Invalid Offset: %x Size: %x", + offset, size); + return -1; + } + /* Write the PCR register with provided data + * Then read back PCR register to prevent from back to back write. + */ + switch (size) { + case 4: + write32(PCH_PCR_ADDRESS(pid, offset), (u32) data); + break; + case 2: + write16(PCH_PCR_ADDRESS(pid, offset), (u16) data); + break; + case 1: + write8(PCH_PCR_ADDRESS(pid, offset), (u8) data); + break; + default: + break; + } + read32(PCH_PCR_ADDRESS(PID_LPC, R_PCH_PCR_LPC_GCFD)); + + return 0; +} + +u8 pcr_write32(PCH_SBI_PID pid, u16 offset, u32 indata) +{ + return pch_pcr_write(pid, offset, sizeof(u32), indata); +} + +u8 pcr_write16(PCH_SBI_PID pid, u16 offset, u16 indata) +{ + return pch_pcr_write(pid, offset, sizeof(u16), indata); +} + +u8 pcr_write8(PCH_SBI_PID pid, u16 offset, u8 indata) +{ + return pch_pcr_write(pid, offset, sizeof(u8), indata); +} + +/* + * Write PCR register. (This is internal function) + * It programs PCR register and size in 1/2/4 bytes. + * The offset should not exceed 0xFFFF and must be aligned with size + * + * PCH_SBI_PID defines as 8 bit Port ID that will be used when sending + * transaction to sideband. + */ +static u8 pcr_and_then_or(PCH_SBI_PID pid, u16 offset, u32 size, u32 anddata, + u32 ordata) +{ + u8 status; + u32 data32; + + status = pch_pcr_read(pid, offset, size, &data32); + if (status != 0) + return -1; + + data32 &= anddata; + data32 |= ordata; + + status = pch_pcr_write(pid, offset, size, data32); + return status; +} + +u8 pcr_andthenor32(PCH_SBI_PID pid, u16 offset, u32 anddata, u32 ordata) +{ + return pcr_and_then_or(pid, offset, sizeof(u32), anddata, ordata); +} + +u8 pcr_andthenor16(PCH_SBI_PID pid, u16 offset, u16 anddata, u16 ordata) +{ + return pcr_and_then_or(pid, offset, sizeof(u16), anddata, ordata); +} + +u8 pcr_andthenor8(PCH_SBI_PID pid, u16 offset, u8 anddata, u8 ordata) +{ + return pcr_and_then_or(pid, offset, sizeof(u8), anddata, ordata); +} diff --git a/src/soc/intel/skylake/pei_data.c b/src/soc/intel/skylake/pei_data.c index 180f0ca..b943224 100644 --- a/src/soc/intel/skylake/pei_data.c +++ b/src/soc/intel/skylake/pei_data.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,12 +15,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ +#include <console/console.h> +#include <console/streams.h> #include <stdlib.h> #include <stdint.h> -#include <console/streams.h> #include <soc/iomap.h> #include <soc/pei_data.h> #include <soc/pei_wrapper.h> @@ -30,18 +32,15 @@ static void ABI_X86 send_to_console(unsigned char b) console_tx_byte(b); } -void broadwell_fill_pei_data(struct pei_data *pei_data) +void soc_fill_pei_data(struct pei_data *pei_data) { pei_data->pei_version = PEI_VERSION; pei_data->board_type = BOARD_TYPE_ULT; - pei_data->usbdebug = CONFIG_USBDEBUG; pei_data->pciexbar = MCFG_BASE_ADDRESS; pei_data->smbusbar = SMBUS_BASE_ADDRESS; - pei_data->ehcibar = EARLY_EHCI_BAR; pei_data->xhcibar = EARLY_XHCI_BAR; pei_data->gttbar = EARLY_GTT_BAR; pei_data->pmbase = ACPI_BASE_ADDRESS; - pei_data->gpiobase = GPIO_BASE_ADDRESS; pei_data->tseg_size = smm_region_size(); pei_data->temp_mmio_base = EARLY_TEMP_MMIO; pei_data->tx_byte = &send_to_console; diff --git a/src/soc/intel/skylake/pmc.c b/src/soc/intel/skylake/pmc.c new file mode 100644 index 0000000..934c130 --- /dev/null +++ b/src/soc/intel/skylake/pmc.c @@ -0,0 +1,254 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <chip.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <cpu/cpu.h> +#include <pc80/mc146818rtc.h> +#include <reg_script.h> +#include <string.h> +#include <soc/iomap.h> +#include <soc/pci_devs.h> +#include <soc/pmc.h> +#include <soc/pm.h> +#include <cpu/x86/smm.h> +#include <soc/pcr.h> +#include <soc/ramstage.h> +#if IS_ENABLED(CONFIG_CHROMEOS) +#include <vendorcode/google/chromeos/chromeos.h> +#endif + +static const struct reg_script pch_pmc_misc_init_script[] = { + /* Setup SLP signal assertion, SLP_S4=4s, SLP_S3=50ms */ + REG_PCI_RMW16(GEN_PMCON_B, ~((3 << 4)|(1 << 10)), + (1 << 3)|(1 << 11)|(1 << 12)), + REG_IO_RMW32(ACPI_BASE_ADDRESS + PM1_CNT, ~SLP_TYP, SCI_EN), + /* Indicate DRAM init done for MRC */ + REG_PCI_OR8(GEN_PMCON_A, (1 << 23)), + REG_SCRIPT_END +}; + +static void pch_pmc_add_mmio_resources(device_t dev) +{ + struct resource *res; + const u32 default_decode_base = PCH_PCR_BASE_ADDRESS; + + /* + * Till PCI enumeration happens we need to allocate the PMC base + * statically. Above the PCR base. + */ + if (PCH_PWRM_BASE_ADDRESS < default_decode_base) { + res = new_resource(dev, PWRMBASE); + res->base = PCH_PWRM_BASE_ADDRESS; + /* 64KB PMC size */ + res->size = 0x10000; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | + IORESOURCE_FIXED | IORESOURCE_RESERVE; + } +} + +static void pch_pmc_add_io_resource(device_t dev, u16 base, u16 size, int index) +{ + struct resource *res; + res = new_resource(dev, index); + res->base = base; + res->size = size; + res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; +} + +static void pch_pmc_add_io_resources(device_t dev) +{ + /* PMBASE */ + pch_pmc_add_io_resource(dev, ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, ABASE); +} + +static void pch_pmc_read_resources(device_t dev) +{ + /* Get the normal PCI resources of this device. */ + pci_dev_read_resources(dev); + + /* Add non-standard MMIO resources. */ + pch_pmc_add_mmio_resources(dev); + + /* Add IO resources. */ + pch_pmc_add_io_resources(dev); +} + +static void pch_set_acpi_mode(void) +{ + if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER) && acpi_slp_type != 3) { + printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); + outb(APM_CNT_ACPI_DISABLE, APM_CNT); + printk(BIOS_DEBUG, "done.\n"); + } +} + +#if IS_ENABLED(CONFIG_CHROMEOS_VBNV_CMOS) +/* + * Preserve Vboot NV data when clearing CMOS as it will + * have been re-initialized already by Vboot firmware init. + */ +static void pch_cmos_init_preserve(int reset) +{ + uint8_t vbnv[CONFIG_VBNV_SIZE]; + if (reset) + read_vbnv(vbnv); + + cmos_init(reset); + + if (reset) + save_vbnv(vbnv); +} +#endif + +static void pch_rtc_init(void) +{ + u8 reg8; + int rtc_failed; + /*PMC Controller Device 0x1F, Func 02*/ + device_t dev = PCH_DEV_PMC; + reg8 = pci_read_config8(dev, GEN_PMCON_B); + rtc_failed = reg8 & RTC_BATTERY_DEAD; + if (rtc_failed) { + reg8 &= ~RTC_BATTERY_DEAD; + pci_write_config8(dev, GEN_PMCON_B, reg8); + printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); + } + +#if IS_ENABLED(CONFIG_CHROMEOS_VBNV_CMOS) + pch_cmos_init_preserve(rtc_failed); +#else + cmos_init(rtc_failed); +#endif +} + +static void pch_power_options(void) +{ + u16 reg16; + const char *state; + /*PMC Controller Device 0x1F, Func 02*/ + device_t dev = PCH_DEV_PMC; + /* Get the chip configuration */ + config_t *config = dev->chip_info; + int pwr_on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; + + /* + * Which state do we want to goto after g3 (power restored)? + * 0 == S0 Full On + * 1 == S5 Soft Off + * + * If the option is not existent (Laptops), use Kconfig setting. + */ + /*TODO: cmos_layout.bin need to verify; cause wrong CMOS setup*/ + //get_option(&pwr_on, "power_on_after_fail"); + pwr_on = MAINBOARD_POWER_ON; + reg16 = pci_read_config16(dev, GEN_PMCON_B); + reg16 &= 0xfffe; + switch (pwr_on) { + case MAINBOARD_POWER_OFF: + reg16 |= 1; + state = "off"; + break; + case MAINBOARD_POWER_ON: + reg16 &= ~1; + state = "on"; + break; + case MAINBOARD_POWER_KEEP: + reg16 &= ~1; + state = "state keep"; + break; + default: + state = "undefined"; + } + pci_write_config16(dev, GEN_PMCON_B, reg16); + printk(BIOS_INFO, "Set power %s after power failure.\n", state); + /* GPE setup based on device tree configuration */ + enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2, + config->gpe0_en_3, config->gpe0_en_4); + + /* SMI setup based on device tree configuration */ + enable_alt_smi(config->ec_smi_gpio, config->alt_gp_smi_en); +} + +static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable) +{ + uint32_t reg; + uint8_t *pmcbase = pmc_mmio_regs(); + + printk(BIOS_DEBUG, "%sabling Deep S%c\n", + enable ? "En" : "Dis", sx + '0'); + reg = read32(pmcbase + offset); + if (enable) + reg |= mask; + else + reg &= ~mask; + write32(pmcbase + offset, reg); +} + +static void config_deep_s5(int on) +{ + /* Treat S4 the same as S5. */ + config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS | S4AC_GATE_SUS, 4, on); + config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS | S5AC_GATE_SUS, 5, on); +} + +static void config_deep_s3(int on) +{ + config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS | S3AC_GATE_SUS, 3, on); +} + +static void pmc_init(struct device *dev) +{ + config_t *config = dev->chip_info; + + pch_rtc_init(); + + /* Initialize power management */ + pch_power_options(); + + reg_script_run_on_dev(dev, pch_pmc_misc_init_script); + pch_set_acpi_mode(); + + config_deep_s3(config->deep_s3_enable); + config_deep_s5(config->deep_s5_enable); +} + +static struct device_operations device_ops = { + .read_resources = &pch_pmc_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .init = &pmc_init, + .scan_bus = &scan_lpc_bus, + .ops_pci = &soc_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { + 0x9d21, + 0 +}; + +static const struct pci_driver pch_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/soc/intel/skylake/pmutil.c b/src/soc/intel/skylake/pmutil.c index 7686387..c22a120 100644 --- a/src/soc/intel/skylake/pmutil.c +++ b/src/soc/intel/skylake/pmutil.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ /* @@ -27,11 +28,14 @@ #include <device/pci.h> #include <device/pci_def.h> #include <console/console.h> +#include <stdlib.h> +#include <soc/gpio.h> #include <soc/iomap.h> #include <soc/lpc.h> #include <soc/pci_devs.h> #include <soc/pm.h> -#include <soc/gpio.h> +#include <soc/pmc.h> +#include <soc/smbus.h> /* Print status bits with descriptive names */ static void print_status_bits(u32 status, const char *bit_names[]) @@ -41,7 +45,7 @@ static void print_status_bits(u32 status, const char *bit_names[]) if (!status) return; - for (i=31; i>=0; i--) { + for (i = 31; i >= 0; i--) { if (status & (1 << i)) { if (bit_names[i]) printk(BIOS_DEBUG, "%s ", bit_names[i]); @@ -59,7 +63,7 @@ static void print_gpio_status(u32 status, int start) if (!status) return; - for (i=31; i>=0; i--) { + for (i = 31; i >= 0; i--) { if (status & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", start + i); } @@ -212,49 +216,53 @@ void disable_smi(u32 mask) */ /* Clear GPIO SMI status and return events that are enabled and active */ -static u32 reset_alt_smi_status(void) +void reset_alt_smi_status(void) { - u32 alt_sts, alt_en; - - /* Low Power variant moves this to GPIO region as dword */ - alt_sts = inl(GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_STS); - outl(alt_sts, GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_STS); - alt_en = inl(GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_EN); - - /* Only report enabled events */ - return alt_sts & alt_en; + /*Clear GPIO SMI Status*/ + clear_all_smi(); } /* Print GPIO SMI status bits */ -static u32 print_alt_smi_status(u32 alt_sts) +static u32 print_alt_smi_status(void) { - if (!alt_sts) - return 0; + u32 alt_sts[GPIO_COMMUNITY_MAX]; + int gpio_index; + /* GPIO Communities GPP_A ~ E support SMI */ + const char gpiowell[] = { + [0] = 'A', + [1] = 'B', + [2] = 'C', + [3] = 'D', + [4] = 'E' + }; printk(BIOS_DEBUG, "ALT_STS: "); - - /* First 16 events are GPIO 32-47 */ - print_gpio_status(alt_sts & 0xffff, 32); + get_smi_status(alt_sts); + /* GPP_A to GPP_E GPIO has Status and Enable functionality*/ + for (gpio_index = 0; gpio_index < ARRAY_SIZE(gpiowell); + gpio_index++) { + printk(BIOS_DEBUG, "GPIO Group_%c\n", + gpiowell[gpio_index]); + print_gpio_status(alt_sts[gpio_index], 0); + } printk(BIOS_DEBUG, "\n"); - return alt_sts; + return 0; } /* Print, clear, and return GPIO SMI status */ u32 clear_alt_smi_status(void) { - return print_alt_smi_status(reset_alt_smi_status()); + reset_alt_smi_status(); + return print_alt_smi_status(); } /* Enable GPIO SMI events */ -void enable_alt_smi(u32 mask) +void enable_alt_smi(int gpionum, u32 mask) { - u32 alt_en; - - alt_en = inl(GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_EN); - alt_en |= mask; - outl(alt_en, GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_EN); + /*Set GPIO EN Status*/ + enable_gpio_groupsmi(gpionum, mask); } @@ -265,18 +273,25 @@ void enable_alt_smi(u32 mask) /* Clear TCO status and return events that are enabled and active */ static u32 reset_tco_status(void) { - u32 tcobase = ACPI_BASE_ADDRESS + 0x60; - u32 tco_sts = inl(tcobase + 0x04); - u32 tco_en = inl(ACPI_BASE_ADDRESS + 0x68); + u16 tco1_sts; + u16 tco2_sts; + u16 tcobase; + + tcobase = pmc_tco_regs(); + + /* TCO Status 2 register*/ + tco2_sts = inw(tcobase + TCO2_STS); + tco2_sts |= (TCO2_STS_SECOND_TO | TCO2_STS_BOOT); + outw(tco2_sts, tcobase + TCO2_STS); - /* Don't clear BOOT_STS before SECOND_TO_STS */ - outl(tco_sts & ~(1 << 18), tcobase + 0x04); + /* TCO Status 1 register*/ + tco1_sts = inw(tcobase + TCO1_STS); - /* Clear BOOT_STS */ - if (tco_sts & (1 << 18)) - outl(tco_sts & (1 << 18), tcobase + 0x04); + /* Clear SECOND_TO_STS bit */ + if (tco2_sts & TCO2_STS_SECOND_TO) + outw(tco2_sts & ~TCO2_STS_SECOND_TO, tcobase + TCO2_STS); - return tco_sts & tco_en; + return (tco2_sts << 16) | tco1_sts; } /* Print TCO status bits */ @@ -319,7 +334,7 @@ u32 clear_tco_status(void) void enable_tco_sci(void) { /* Clear pending events */ - outl(ACPI_BASE_ADDRESS + GPE0_STS(3), TCOSCI_STS); + outl(TCOSCI_STS, ACPI_BASE_ADDRESS + GPE0_STS(3)); /* Enable TCO SCI events */ enable_gpe(TCOSCI_EN); @@ -425,7 +440,7 @@ void disable_gpe(u32 mask) int acpi_sci_irq(void) { - int scis = pci_read_config32(PCH_DEV_LPC, ACPI_CNTL) & SCI_IRQ_SEL; + int scis = pci_read_config32(PCH_DEV_PMC, ACTL) & SCI_IRQ_SEL; int sci_irq = 9; /* Determine how SCI is routed. */ @@ -450,3 +465,26 @@ int acpi_sci_irq(void) printk(BIOS_DEBUG, "SCI is IRQ%d\n", sci_irq); return sci_irq; } + +uint8_t *pmc_mmio_regs(void) +{ + uint32_t reg32; + + reg32 = pci_read_config32(PCH_DEV_PMC, PWRMBASE); + + /* 4KiB alignment. */ + reg32 &= ~0xfff; + + return (void *)(uintptr_t)reg32; +} + +uint16_t pmc_tco_regs(void) +{ + uint16_t reg16; + + reg16 = pci_read_config16(PCH_DEV_SMBUS, TCOBASE); + + reg16 &= ~0x1f; + + return reg16; +} diff --git a/src/soc/intel/skylake/ramstage.c b/src/soc/intel/skylake/ramstage.c index eaa28d0..51e9b31 100644 --- a/src/soc/intel/skylake/ramstage.c +++ b/src/soc/intel/skylake/ramstage.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,87 +15,17 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#include <arch/acpi.h> -#include <cbmem.h> +#include <bootstate.h> #include <console/console.h> -#include <device/device.h> -#include <stdlib.h> -#include <string.h> -#include <soc/nvs.h> -#include <soc/pm.h> +#include <fsp_util.h> #include <soc/ramstage.h> -#include <soc/intel/broadwell/chip.h> +#include <soc/intel/common/ramstage.h> -/* Save bit index for PM1_STS and GPE_STS for ACPI _SWS */ -static void save_acpi_wake_source(global_nvs_t *gnvs) +void soc_init_pre_device(void *chip_info) { - struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE); - uint16_t pm1; - int gpe_reg; - - if (!ps) - return; - - pm1 = ps->pm1_sts & ps->pm1_en; - - /* Scan for first set bit in PM1 */ - for (gnvs->pm1i = 0; gnvs->pm1i < 16; gnvs->pm1i++) { - if (pm1 & 1) - break; - pm1 >>= 1; - } - - /* If unable to determine then return -1 */ - if (gnvs->pm1i >= 16) - gnvs->pm1i = -1; - - /* Scan for first set bit in GPE registers */ - gnvs->gpei = -1; - for (gpe_reg = 0; gpe_reg < GPE0_REG_MAX; gpe_reg++) { - u32 gpe = ps->gpe0_sts[gpe_reg] & ps->gpe0_en[gpe_reg]; - int start = gpe_reg * GPE0_REG_SIZE; - int end = start + GPE0_REG_SIZE; - - if (gpe == 0) { - if (!gnvs->gpei) - gnvs->gpei = end; - continue; - } - - for (gnvs->gpei = start; gnvs->gpei < end; gnvs->gpei++) { - if (gpe & 1) - break; - gpe >>= 1; - } - } - - /* If unable to determine then return -1 */ - if (gnvs->gpei >= (GPE0_REG_MAX * GPE0_REG_SIZE)) - gnvs->gpei = -1; - - printk(BIOS_DEBUG, "ACPI _SWS is PM1 Index %lld GPE Index %lld\n", - gnvs->pm1i, gnvs->gpei); -} - -static void s3_resume_prepare(void) -{ - global_nvs_t *gnvs; - - gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof(global_nvs_t)); - if (gnvs == NULL) - return; - - if (!acpi_is_wakeup_s3()) - memset(gnvs, 0, sizeof(global_nvs_t)); - else - save_acpi_wake_source(gnvs); -} - -void broadwell_init_pre_device(void *chip_info) -{ - s3_resume_prepare(); - broadwell_run_reference_code(); + /* Perform silicon specific init. */ + intel_silicon_init(); } diff --git a/src/soc/intel/skylake/refcode.c b/src/soc/intel/skylake/refcode.c deleted file mode 100644 index 201825a..0000000 --- a/src/soc/intel/skylake/refcode.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <arch/acpi.h> -#include <cbmem.h> -#include <console/console.h> -#include <console/streams.h> -#include <cpu/x86/tsc.h> -#include <program_loading.h> -#include <rmodule.h> -#include <stage_cache.h> -#include <string.h> -#if IS_ENABLED(CONFIG_CHROMEOS) -#include <vendorcode/google/chromeos/vboot_handoff.h> -#endif -#include <soc/pei_data.h> -#include <soc/pei_wrapper.h> -#include <soc/ramstage.h> - -static pei_wrapper_entry_t load_refcode_from_cache(void) -{ - struct prog refcode; - - printk(BIOS_DEBUG, "refcode loading from cache.\n"); - - stage_cache_load_stage(STAGE_REFCODE, &refcode); - - return (pei_wrapper_entry_t)prog_entry(&refcode); -} - -static void cache_refcode(const struct rmod_stage_load *rsl) -{ - stage_cache_add(STAGE_REFCODE, rsl->prog); -} - -#if IS_ENABLED(CONFIG_CHROMEOS) -static int load_refcode_from_vboot(struct rmod_stage_load *refcode) -{ - struct vboot_handoff *vboot_handoff; - const struct firmware_component *fwc; - struct cbfs_stage *stage; - - vboot_handoff = cbmem_find(CBMEM_ID_VBOOT_HANDOFF); - fwc = &vboot_handoff->components[CONFIG_VBOOT_REFCODE_INDEX]; - - if (vboot_handoff == NULL || - vboot_handoff->selected_firmware == VB_SELECT_FIRMWARE_READONLY || - CONFIG_VBOOT_REFCODE_INDEX >= MAX_PARSED_FW_COMPONENTS || - fwc->size == 0 || fwc->address == 0) - return -1; - - printk(BIOS_DEBUG, "refcode loading from vboot rw area.\n"); - stage = (void *)(uintptr_t)fwc->address; - - if (rmodule_stage_load(refcode, stage)) { - printk(BIOS_DEBUG, "Error loading reference code.\n"); - return -1; - } - return 0; -} -#else -static int load_refcode_from_vboot(struct rmod_stage_load *refcode) -{ - return -1; -} -#endif - -static int load_refcode_from_cbfs(struct rmod_stage_load *refcode) -{ - printk(BIOS_DEBUG, "refcode loading from cbfs.\n"); - - if (rmodule_stage_load_from_cbfs(refcode)) { - printk(BIOS_DEBUG, "Error loading reference code.\n"); - return -1; - } - - return 0; -} - -static pei_wrapper_entry_t load_reference_code(void) -{ - struct prog prog = { - .name = CONFIG_CBFS_PREFIX "/refcode", - }; - struct rmod_stage_load refcode = { - .cbmem_id = CBMEM_ID_REFCODE, - .prog = &prog, - }; - - if (acpi_is_wakeup_s3()) { - return load_refcode_from_cache(); - } - - if (load_refcode_from_vboot(&refcode) || - load_refcode_from_cbfs(&refcode)) - return NULL; - - /* Cache loaded reference code. */ - cache_refcode(&refcode); - - return prog_entry(&prog); -} - -void broadwell_run_reference_code(void) -{ - int ret, dummy; - struct pei_data pei_data; - pei_wrapper_entry_t entry; - - memset(&pei_data, 0, sizeof(pei_data)); - mainboard_fill_pei_data(&pei_data); - broadwell_fill_pei_data(&pei_data); - - pei_data.boot_mode = acpi_slp_type; - pei_data.saved_data = (void *) &dummy; - - entry = load_reference_code(); - if (entry == NULL) { - printk(BIOS_ERR, "Reference code not found\n"); - return; - } - - /* Call into reference code. */ - ret = entry(&pei_data); - if (ret != 0) { - printk(BIOS_ERR, "Reference code returned %d\n", ret); - return; - } -} diff --git a/src/soc/intel/skylake/reset.c b/src/soc/intel/skylake/reset.c deleted file mode 100644 index a56ec24..0000000 --- a/src/soc/intel/skylake/reset.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <halt.h> -#include <reset.h> -#include <soc/reset.h> - -/* - * Soft reset (INIT# to cpu) - write 0x1 to I/O 0x92 - * Soft reset (INIT# to cpu)- write 0x4 to I/0 0xcf9 - * Cold reset (S0->S5->S0) - write 0xe to I/0 0xcf9 - * Warm reset (PLTRST# assertion) - write 0x6 to I/O 0xcf9 - * Global reset (S0->S5->S0 with ME reset) - write 0x6 or 0xe to 0xcf9 but - * with ETR[20] set. - */ - -void soft_reset(void) -{ - outb(0x04, 0xcf9); -} - -void hard_reset(void) -{ - outb(0x06, 0xcf9); -} - -void reset_system(void) -{ - hard_reset(); - halt(); -} diff --git a/src/soc/intel/skylake/romstage/Makefile.inc b/src/soc/intel/skylake/romstage/Makefile.inc index ae0f980..52029fc 100644 --- a/src/soc/intel/skylake/romstage/Makefile.inc +++ b/src/soc/intel/skylake/romstage/Makefile.inc @@ -1,13 +1,9 @@ -cpu_incs += $(src)/soc/intel/broadwell/romstage/cache_as_ram.inc - romstage-y += cpu.c romstage-y += pch.c romstage-y += power_state.c -romstage-y += raminit.c romstage-y += report_platform.c romstage-y += romstage.c romstage-y += smbus.c romstage-y += spi.c -romstage-y += stack.c romstage-y += systemagent.c -romstage-$(CONFIG_DRIVERS_UART_8250MEM) += uart.c +romstage-$(CONFIG_INTEL_PCH_UART_CONSOLE) += uart.c diff --git a/src/soc/intel/skylake/romstage/cache_as_ram.inc b/src/soc/intel/skylake/romstage/cache_as_ram.inc deleted file mode 100644 index a10ca4c..0000000 --- a/src/soc/intel/skylake/romstage/cache_as_ram.inc +++ /dev/null @@ -1,341 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich(a)gmail.com> - * Copyright (C) 2007-2008 coresystems GmbH - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <cpu/x86/mtrr.h> -#include <cpu/x86/cache.h> -#include <cpu/x86/post_code.h> -#include <cbmem.h> - -/* The full cache-as-ram size includes the cache-as-ram portion from coreboot - * and the space used by the reference code. These 2 values combined should - * be a power of 2 because the MTRR setup assumes that. */ -#define CACHE_AS_RAM_SIZE \ - (CONFIG_DCACHE_RAM_SIZE + CONFIG_DCACHE_RAM_MRC_VAR_SIZE) -#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE -#define CACHE_AS_RAM_LIMIT (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE) -#define USBDEBUG_VAR_SIZE 36 /* sizeof(struct ehci_debug_info) */ - -/* Cache 4GB - MRC_SIZE_KB for MRC */ -#define CACHE_MRC_BYTES ((CONFIG_CACHE_MRC_SIZE_KB << 10) - 1) -#define CACHE_MRC_BASE (0xFFFFFFFF - CACHE_MRC_BYTES) -#define CACHE_MRC_MASK (~CACHE_MRC_BYTES) - -#define CPU_MAXPHYSADDR CONFIG_CPU_ADDR_BITS -#define CPU_PHYSMASK_HI (1 << (CPU_MAXPHYSADDR - 32) - 1) - -#define NoEvictMod_MSR 0x2e0 - - /* Save the BIST result. */ - movl %eax, %ebp - -cache_as_ram: - post_code(0x20) - - /* Send INIT IPI to all excluding ourself. */ - movl $0x000C4500, %eax - movl $0xFEE00300, %esi - movl %eax, (%esi) - - /* All CPUs need to be in Wait for SIPI state */ -wait_for_sipi: - movl (%esi), %eax - bt $12, %eax - jc wait_for_sipi - - post_code(0x21) - /* Zero out all fixed range and variable range MTRRs. */ - movl $mtrr_table, %esi - movl $((mtrr_table_end - mtrr_table) / 2), %edi - xorl %eax, %eax - xorl %edx, %edx -clear_mtrrs: - movw (%esi), %bx - movzx %bx, %ecx - wrmsr - add $2, %esi - dec %edi - jnz clear_mtrrs - - post_code(0x22) - /* Configure the default memory type to uncacheable. */ - movl $MTRRdefType_MSR, %ecx - rdmsr - andl $(~0x00000cff), %eax - wrmsr - - post_code(0x23) - /* Set Cache-as-RAM base address. */ - movl $(MTRRphysBase_MSR(0)), %ecx - movl $(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax - xorl %edx, %edx - wrmsr - - post_code(0x24) - /* Set Cache-as-RAM mask. */ - movl $(MTRRphysMask_MSR(0)), %ecx - movl $(~(CACHE_AS_RAM_SIZE - 1) | MTRRphysMaskValid), %eax - movl $CPU_PHYSMASK_HI, %edx - wrmsr - - post_code(0x25) - - /* Enable MTRR. */ - movl $MTRRdefType_MSR, %ecx - rdmsr - orl $MTRRdefTypeEn, %eax - wrmsr - - /* Enable cache (CR0.CD = 0, CR0.NW = 0). */ - movl %cr0, %eax - andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax - invd - movl %eax, %cr0 - - /* enable the 'no eviction' mode */ - movl $NoEvictMod_MSR, %ecx - rdmsr - orl $1, %eax - andl $~2, %eax - wrmsr - - /* Clear the cache memory region. This will also fill up the cache */ - movl $CACHE_AS_RAM_BASE, %esi - movl %esi, %edi - movl $(CACHE_AS_RAM_SIZE / 4), %ecx - xorl %eax, %eax - rep stosl - - /* enable the 'no eviction run' state */ - movl $NoEvictMod_MSR, %ecx - rdmsr - orl $3, %eax - wrmsr - - post_code(0x26) - /* Enable Cache-as-RAM mode by disabling cache. */ - movl %cr0, %eax - orl $CR0_CacheDisable, %eax - movl %eax, %cr0 - - /* Enable cache for our code in Flash because we do XIP here */ - movl $MTRRphysBase_MSR(1), %ecx - xorl %edx, %edx - /* - * IMPORTANT: The following calculation _must_ be done at runtime. See - * http://www.coreboot.org/pipermail/coreboot/2010-October/060855.html - */ - movl $copy_and_run, %eax - andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax - orl $MTRR_TYPE_WRPROT, %eax - wrmsr - - movl $MTRRphysMask_MSR(1), %ecx - movl $CPU_PHYSMASK_HI, %edx - movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRRphysMaskValid), %eax - wrmsr - - post_code(0x27) -#if CONFIG_CACHE_MRC_BIN - /* Enable caching for ram init code to run faster */ - movl $MTRRphysBase_MSR(2), %ecx - movl $(CACHE_MRC_BASE | MTRR_TYPE_WRPROT), %eax - xorl %edx, %edx - wrmsr - movl $MTRRphysMask_MSR(2), %ecx - movl $(CACHE_MRC_MASK | MTRRphysMaskValid), %eax - movl $CPU_PHYSMASK_HI, %edx - wrmsr -#endif - - post_code(0x28) - /* Enable cache. */ - movl %cr0, %eax - andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax - movl %eax, %cr0 - - /* Setup the stack. */ - movl $(CACHE_AS_RAM_LIMIT), %eax -#if CONFIG_USBDEBUG - sub $(USBDEBUG_VAR_SIZE), %eax -#endif - movl %eax, %esp - - /* Restore the BIST result. */ - movl %ebp, %eax - - /* Build the call frame. */ - movl %esp, %ebp - movd %mm1, %ebx - pushl %ebx - movd %mm0, %ebx - pushl %ebx - pushl %eax - -before_romstage: - post_code(0x29) - /* Call romstage.c main function. */ - call romstage_main - /* Save return value from romstage_main. It contains the stack to use - * after cache-as-ram is torn down. It also contains the information - * for setting up MTRRs. */ - movl %eax, %ebx - - post_code(0x2f) - - /* Copy global variable space (for USBDEBUG) to memory */ -#if CONFIG_USBDEBUG - cld - movl $(CACHE_AS_RAM_LIMIT - USBDEBUG_VAR_SIZE), %esi - movl $(CONFIG_RAMTOP - USBDEBUG_VAR_SIZE), %edi - movl $USBDEBUG_VAR_SIZE, %ecx - rep movsb -#endif - - post_code(0x30) - - /* Disable cache. */ - movl %cr0, %eax - orl $CR0_CacheDisable, %eax - movl %eax, %cr0 - - post_code(0x31) - - /* Disable MTRR. */ - movl $MTRRdefType_MSR, %ecx - rdmsr - andl $(~MTRRdefTypeEn), %eax - wrmsr - - post_code(0x31) - - /* Disable the no eviction run state */ - movl $NoEvictMod_MSR, %ecx - rdmsr - andl $~2, %eax - wrmsr - - invd - - /* Disable the no eviction mode */ - rdmsr - andl $~1, %eax - wrmsr - -#if CONFIG_CACHE_MRC_BIN - /* Clear MTRR that was used to cache MRC */ - xorl %eax, %eax - xorl %edx, %edx - movl $MTRRphysBase_MSR(2), %ecx - wrmsr - movl $MTRRphysMask_MSR(2), %ecx - wrmsr -#endif - - post_code(0x33) - - /* Enable cache. */ - movl %cr0, %eax - andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax - movl %eax, %cr0 - - post_code(0x36) - - /* Disable cache. */ - movl %cr0, %eax - orl $CR0_CacheDisable, %eax - movl %eax, %cr0 - - post_code(0x38) - - /* Setup stack as indicated by return value from ramstage_main(). */ - movl %ebx, %esp - - /* Get number of MTRRs. */ - popl %ebx - movl $MTRRphysBase_MSR(0), %ecx -1: - testl %ebx, %ebx - jz 1f - - /* Low 32 bits of MTRR base. */ - popl %eax - /* Upper 32 bits of MTRR base. */ - popl %edx - /* Write MTRR base. */ - wrmsr - inc %ecx - /* Low 32 bits of MTRR mask. */ - popl %eax - /* Upper 32 bits of MTRR mask. */ - popl %edx - /* Write MTRR mask. */ - wrmsr - inc %ecx - - dec %ebx - jmp 1b -1: - post_code(0x39) - - /* And enable cache again after setting MTRRs. */ - movl %cr0, %eax - andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax - movl %eax, %cr0 - - post_code(0x3a) - - /* Enable MTRR. */ - movl $MTRRdefType_MSR, %ecx - rdmsr - orl $MTRRdefTypeEn, %eax - wrmsr - - post_code(0x3b) - - /* Invalidate the cache again. */ - invd - - post_code(0x3c) - -__main: - post_code(POST_PREPARE_RAMSTAGE) - cld /* Clear direction flag. */ - call romstage_after_car - -.Lhlt: - post_code(POST_DEAD_CODE) - hlt - jmp .Lhlt - -mtrr_table: - /* Fixed MTRRs */ - .word 0x250, 0x258, 0x259 - .word 0x268, 0x269, 0x26A - .word 0x26B, 0x26C, 0x26D - .word 0x26E, 0x26F - /* Variable MTRRs */ - .word 0x200, 0x201, 0x202, 0x203 - .word 0x204, 0x205, 0x206, 0x207 - .word 0x208, 0x209, 0x20A, 0x20B - .word 0x20C, 0x20D, 0x20E, 0x20F - .word 0x210, 0x211, 0x212, 0x213 -mtrr_table_end: - diff --git a/src/soc/intel/skylake/romstage/cpu.c b/src/soc/intel/skylake/romstage/cpu.c index af175be..ba472a9 100644 --- a/src/soc/intel/skylake/romstage/cpu.c +++ b/src/soc/intel/skylake/romstage/cpu.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/cpu.h> @@ -34,7 +35,7 @@ void set_max_freq(void) { msr_t msr, perf_ctl, platform_info; - /* Check for configurable TDP option */ + /* Check for configurable TDP option */ platform_info = rdmsr(MSR_PLATFORM_INFO); if ((platform_info.hi >> 1) & 3) { @@ -51,5 +52,5 @@ void set_max_freq(void) wrmsr(IA32_PERF_CTL, perf_ctl); printk(BIOS_DEBUG, "CPU: frequency set to %d MHz\n", - ((perf_ctl.lo >> 8) & 0xff) * CPU_BCLK); + ((perf_ctl.lo >> 8) & 0xff) * CPU_BCLK); } diff --git a/src/soc/intel/skylake/romstage/pch.c b/src/soc/intel/skylake/romstage/pch.c index 6fa6c39..9ca83b3 100644 --- a/src/soc/intel/skylake/romstage/pch.c +++ b/src/soc/intel/skylake/romstage/pch.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,10 +15,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/io.h> +#include <chip.h> #include <console/console.h> #include <device/device.h> #include <device/pci_def.h> @@ -25,97 +27,25 @@ #include <soc/iomap.h> #include <soc/lpc.h> #include <soc/pch.h> +#include <soc/pcr.h> #include <soc/pci_devs.h> #include <soc/pm.h> -#include <soc/rcba.h> +#include <soc/pmc.h> #include <soc/romstage.h> #include <soc/smbus.h> -#include <soc/intel/broadwell/chip.h> - -const struct reg_script pch_early_init_script[] = { - /* Setup southbridge BARs */ - REG_PCI_WRITE32(RCBA, RCBA_BASE_ADDRESS | 1), - REG_PCI_WRITE32(PMBASE, ACPI_BASE_ADDRESS | 1), - REG_PCI_WRITE8(ACPI_CNTL, ACPI_EN), - REG_PCI_WRITE32(GPIO_BASE, GPIO_BASE_ADDRESS | 1), - REG_PCI_WRITE8(GPIO_CNTL, GPIO_EN), - - /* Set COM1/COM2 decode range */ - REG_PCI_WRITE16(LPC_IO_DEC, 0x0010), - /* Enable legacy decode ranges */ - REG_PCI_WRITE16(LPC_EN, CNF1_LPC_EN | CNF2_LPC_EN | GAMEL_LPC_EN | - COMA_LPC_EN | KBC_LPC_EN | MC_LPC_EN), - - /* Enable IOAPIC */ - REG_MMIO_WRITE16(RCBA_BASE_ADDRESS + OIC, 0x0100), - /* Read back for posted write */ - REG_MMIO_READ16(RCBA_BASE_ADDRESS + OIC), - - /* Set HPET address and enable it */ - REG_MMIO_RMW32(RCBA_BASE_ADDRESS + HPTC, ~3, (1 << 7)), - /* Read back for posted write */ - REG_MMIO_READ32(RCBA_BASE_ADDRESS + HPTC), - /* Enable HPET to start counter */ - REG_MMIO_OR32(HPET_BASE_ADDRESS + 0x10, (1 << 0)), - - /* Disable reset */ - REG_MMIO_OR32(RCBA_BASE_ADDRESS + GCS, (1 << 5)), - /* TCO timer halt */ - REG_IO_OR16(ACPI_BASE_ADDRESS + TCO1_CNT, TCO_TMR_HLT), - - /* Enable upper 128 bytes of CMOS */ - REG_MMIO_OR32(RCBA_BASE_ADDRESS + RC, (1 << 2)), - - /* Disable unused device (always) */ - REG_MMIO_OR32(RCBA_BASE_ADDRESS + FD, PCH_DISABLE_ALWAYS), - - REG_SCRIPT_END -}; -const struct reg_script pch_interrupt_init_script[] = { - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP PCIE INTA -> PIRQA - * D29IP_E1P EHCI INTA -> PIRQD - * D20IP_XHCI XHCI INTA -> PIRQC (MSI) - * D31IP_SIP SATA INTA -> PIRQF (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQG - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQG (MSI) - */ - - /* Device interrupt pin register (board specific) */ - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D31IP, - (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D29IP, (INTA << D29IP_E1P)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D28IP, - (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | - (INTB << D28IP_P4IP)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D27IP, (INTA << D27IP_ZIP)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D26IP, (INTA << D26IP_E2P)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D22IP, (NOINT << D22IP_MEI1IP)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D20IP, (INTA << D20IP_XHCI)), - - /* Device interrupt route registers */ - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D31IR, /* LPC */ - DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D29IR, /* EHCI */ - DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D28IR, /* PCIE */ - DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D27IR, /* HDA */ - DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D22IR, /* ME */ - DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D21IR, /* SIO */ - DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D20IR, /* XHCI */ - DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)), - REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D23IR, /* SDIO */ - DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)), - - REG_SCRIPT_END +/* Max PXRC registers in ITSS*/ +#define MAX_PXRC_CONFIG 0x08 + +static const u8 pch_interrupt_routing[] = { + 11, /* PARC: PIRQA -> IRQ11 */ + 10, /* PBRC: PIRQB -> IRQ10 */ + 11, /* PCRC: PIRQC -> IRQ11 */ + 11, /* PDRC: PIRQD -> IRQ11 */ + 11, /* PERC: PIRQE -> IRQ11 */ + 11, /* PFRC: PIRQF -> IRQ11 */ + 11, /* PGRC: PIRQG -> IRQ11 */ + 11 /* PHRC: PIRQH -> IRQ11 */ }; static void pch_enable_lpc(void) @@ -123,39 +53,85 @@ static void pch_enable_lpc(void) /* Lookup device tree in romstage */ const struct device *dev; const config_t *config; + u16 lpc_en; + + /* IO Decode Range */ + lpc_en = COMA_RANGE | (COMB_RANGE << 4); + pci_write_config16(PCH_DEV_LPC, LPC_IO_DEC, lpc_en); + pcr_write16(PID_DMI, R_PCH_PCR_DMI_LPCIOD, lpc_en); + + /* IO Decode Enable */ + lpc_en = CNF1_LPC_EN | CNF2_LPC_EN | GAMEL_LPC_EN | GAMEH_LPC_EN | + COMA_LPC_EN | KBC_LPC_EN | MC_LPC_EN; + pci_write_config16(PCH_DEV_LPC, LPC_EN, lpc_en); + pcr_write16(PID_DMI, R_PCH_PCR_DMI_LPCIOE, lpc_en); dev = dev_find_slot(0, PCI_DEVFN(PCH_DEV_SLOT_LPC, 0)); if (!dev || !dev->chip_info) return; config = dev->chip_info; + /* Set in PCI generic decode range registers */ pci_write_config32(PCH_DEV_LPC, LPC_GEN1_DEC, config->gen1_dec); pci_write_config32(PCH_DEV_LPC, LPC_GEN2_DEC, config->gen2_dec); pci_write_config32(PCH_DEV_LPC, LPC_GEN3_DEC, config->gen3_dec); pci_write_config32(PCH_DEV_LPC, LPC_GEN4_DEC, config->gen4_dec); + + /* Mirror these same settings in DMI PCR */ + pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR1, config->gen1_dec); + pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR2, config->gen2_dec); + pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR3, config->gen3_dec); + pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR4, config->gen4_dec); } -static void pcie_update_cfg(device_t dev, int reg, u32 mask, u32 or) +static void pch_device_init(void) { + device_t dev; u32 reg32; + u16 tcobase; + u16 tcocnt; + + dev = PCH_DEV_PMC; - reg32 = pci_read_config32(dev, reg); - reg32 &= mask; - reg32 |= or; - pci_write_config32(dev, reg, reg32); + /* Enable ACPI and PMC mmio regs in PMC Config */ + reg32 = pci_read_config32(dev, ACTL); + reg32 |= ACPI_EN | PWRM_EN; + pci_write_config32(dev, ACTL, reg32); + + /* TCO timer halt */ + tcobase = pmc_tco_regs(); + tcocnt = inw(tcobase + TCO1_CNT); + tcocnt |= TCO_TMR_HLT; + outw(tcocnt, tcobase + TCO1_CNT); + + /* Enable upper 128 bytes of CMOS */ + pcr_andthenor32(PID_RTC, R_PCH_PCR_RTC_CONF, (u32)~0, + B_PCH_PCR_RTC_CONF_UCMOS_EN); +} + +static void pch_interrupt_init(void) +{ + u8 index = 0; + + for (index = 0; index < MAX_PXRC_CONFIG; index++) { + if (pch_interrupt_routing[index] < 16 && + pch_interrupt_routing[index] > 2 && + pch_interrupt_routing[index] != 8 && + pch_interrupt_routing[index] != 13) { + pcr_write8(PID_ITSS, + (R_PCH_PCR_ITSS_PIRQA_ROUT + index), + pch_interrupt_routing[index]); + } + } } void pch_early_init(void) { - reg_script_run_on_dev(PCH_DEV_LPC, pch_early_init_script); - reg_script_run_on_dev(PCH_DEV_LPC, pch_interrupt_init_script); + pch_device_init(); + + pch_interrupt_init(); pch_enable_lpc(); enable_smbus(); - - /* 8.14 Additional PCI Express Programming Steps, step #1 */ - pcie_update_cfg(_PCH_DEV(PCIE, 0), 0xf4, ~0x60, 0); - pcie_update_cfg(_PCH_DEV(PCIE, 0), 0xf4, ~0x80, 0x80); - pcie_update_cfg(_PCH_DEV(PCIE, 0), 0xe2, ~0x30, 0x30); } diff --git a/src/soc/intel/skylake/romstage/power_state.c b/src/soc/intel/skylake/romstage/power_state.c index bdb3da9..7a6c8b3 100644 --- a/src/soc/intel/skylake/romstage/power_state.c +++ b/src/soc/intel/skylake/romstage/power_state.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/early_variables.h> @@ -29,14 +30,14 @@ #include <stdlib.h> #include <string.h> #include <soc/iomap.h> -#include <soc/lpc.h> +#include <soc/pmc.h> #include <soc/pci_devs.h> #include <soc/pm.h> #include <soc/romstage.h> static struct chipset_power_state power_state CAR_GLOBAL; -static void migrate_power_state(void) +static void migrate_power_state(int is_recovery) { struct chipset_power_state *ps_cbmem; struct chipset_power_state *ps_car; @@ -50,7 +51,7 @@ static void migrate_power_state(void) } memcpy(ps_cbmem, ps_car, sizeof(*ps_cbmem)); } -CAR_MIGRATE(migrate_power_state); +ROMSTAGE_CBMEM_INIT_HOOK(migrate_power_state) /* Return 0, 3, or 5 to indicate the previous sleep state. */ static int prev_sleep_state(struct chipset_power_state *ps) @@ -60,7 +61,7 @@ static int prev_sleep_state(struct chipset_power_state *ps) if (ps->pm1_sts & WAK_STS) { switch ((ps->pm1_cnt & SLP_TYP) >> SLP_TYP_SHIFT) { -#if CONFIG_HAVE_ACPI_RESUME +#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) case SLP_TYP_S3: prev_sleep_state = SLEEP_STATE_S3; break; @@ -73,7 +74,7 @@ static int prev_sleep_state(struct chipset_power_state *ps) outl(ps->pm1_cnt & ~(SLP_TYP), ACPI_BASE_ADDRESS + PM1_CNT); } - if (ps->gen_pmcon3 & (PWR_FLR | SUS_PWR_FLR)) + if (ps->gen_pmcon_b & (PWR_FLR | SUS_PWR_FLR)) prev_sleep_state = SLEEP_STATE_S5; return prev_sleep_state; @@ -94,8 +95,8 @@ static void dump_power_state(struct chipset_power_state *ps) ps->gpe0_en[0], ps->gpe0_en[1], ps->gpe0_en[2], ps->gpe0_en[3]); - printk(BIOS_DEBUG, "GEN_PMCON: %04x %04x %04x\n", - ps->gen_pmcon1, ps->gen_pmcon2, ps->gen_pmcon3); + printk(BIOS_DEBUG, "GEN_PMCON: %04x %04x\n", + ps->gen_pmcon_a, ps->gen_pmcon_b); printk(BIOS_DEBUG, "Previous Sleep State: S%d\n", ps->prev_sleep_state); @@ -104,13 +105,16 @@ static void dump_power_state(struct chipset_power_state *ps) /* Fill power state structure from ACPI PM registers */ struct chipset_power_state *fill_power_state(void) { + uint16_t tcobase; struct chipset_power_state *ps = car_get_var_ptr(&power_state); + tcobase = pmc_tco_regs(); + ps->pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS); ps->pm1_en = inw(ACPI_BASE_ADDRESS + PM1_EN); ps->pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); - ps->tco1_sts = inw(ACPI_BASE_ADDRESS + TCO1_STS); - ps->tco2_sts = inw(ACPI_BASE_ADDRESS + TCO2_STS); + ps->tco1_sts = inw(tcobase + TCO1_STS); + ps->tco2_sts = inw(tcobase + TCO2_STS); ps->gpe0_sts[0] = inl(ACPI_BASE_ADDRESS + GPE0_STS(0)); ps->gpe0_sts[1] = inl(ACPI_BASE_ADDRESS + GPE0_STS(1)); ps->gpe0_sts[2] = inl(ACPI_BASE_ADDRESS + GPE0_STS(2)); @@ -120,9 +124,8 @@ struct chipset_power_state *fill_power_state(void) ps->gpe0_en[2] = inl(ACPI_BASE_ADDRESS + GPE0_EN(2)); ps->gpe0_en[3] = inl(ACPI_BASE_ADDRESS + GPE0_EN(3)); - ps->gen_pmcon1 = pci_read_config16(PCH_DEV_LPC, GEN_PMCON_1); - ps->gen_pmcon2 = pci_read_config16(PCH_DEV_LPC, GEN_PMCON_2); - ps->gen_pmcon3 = pci_read_config16(PCH_DEV_LPC, GEN_PMCON_3); + ps->gen_pmcon_a = pci_read_config16(PCH_DEV_PMC, GEN_PMCON_A); + ps->gen_pmcon_b = pci_read_config16(PCH_DEV_PMC, GEN_PMCON_B); ps->prev_sleep_state = prev_sleep_state(ps); diff --git a/src/soc/intel/skylake/romstage/raminit.c b/src/soc/intel/skylake/romstage/raminit.c deleted file mode 100644 index 52ea491..0000000 --- a/src/soc/intel/skylake/romstage/raminit.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/cbfs.h> -#include <arch/io.h> -#include <cbfs.h> -#include <cbmem.h> -#include <console/console.h> -#include <device/pci_def.h> -#include <lib.h> -#include <string.h> -#if CONFIG_EC_GOOGLE_CHROMEEC -#include <ec/google/chromeec/ec.h> -#include <ec/google/chromeec/ec_commands.h> -#endif -#include <stage_cache.h> -#include <vendorcode/google/chromeos/chromeos.h> -#include <soc/intel/common/mrc_cache.h> -#include <soc/iomap.h> -#include <soc/pei_data.h> -#include <soc/pei_wrapper.h> -#include <soc/pm.h> -#include <soc/reset.h> -#include <soc/romstage.h> -#include <soc/smm.h> -#include <soc/systemagent.h> - -/* - * Find PEI executable in coreboot filesystem and execute it. - */ -void raminit(struct pei_data *pei_data) -{ - const struct mrc_saved_data *cache; - struct memory_info* mem_info; - pei_wrapper_entry_t entry; - int ret; - - broadwell_fill_pei_data(pei_data); - - if (recovery_mode_enabled()) { - /* Recovery mode does not use MRC cache */ - printk(BIOS_DEBUG, "Recovery mode: not using MRC cache.\n"); - } else if (!mrc_cache_get_current(&cache)) { - /* MRC cache found */ - pei_data->saved_data_size = cache->size; - pei_data->saved_data = &cache->data[0]; - } else if (pei_data->boot_mode == SLEEP_STATE_S3) { - /* Waking from S3 and no cache. */ - printk(BIOS_DEBUG, "No MRC cache found in S3 resume path.\n"); - post_code(POST_RESUME_FAILURE); - reset_system(); - } else { - printk(BIOS_DEBUG, "No MRC cache found.\n"); -#if CONFIG_EC_GOOGLE_CHROMEEC - if (pei_data->boot_mode == SLEEP_STATE_S0) { - /* Ensure EC is running RO firmware. */ - google_chromeec_check_ec_image(EC_IMAGE_RO); - } -#endif - } - - /* - * Do not use saved pei data. Can be set by mainboard romstage - * to force a full train of memory on every boot. - */ - if (pei_data->disable_saved_data) { - printk(BIOS_DEBUG, "Disabling PEI saved data by request\n"); - pei_data->saved_data = NULL; - pei_data->saved_data_size = 0; - } - - /* Determine if mrc.bin is in the cbfs. */ - entry = (pei_wrapper_entry_t)cbfs_get_file_content( - CBFS_DEFAULT_MEDIA, "mrc.bin", CBFS_TYPE_MRC, NULL); - if (entry == NULL) { - printk(BIOS_DEBUG, "Couldn't find mrc.bin\n"); - return; - } - - printk(BIOS_DEBUG, "Starting Memory Reference Code\n"); - - ret = entry(pei_data); - if (ret < 0) - die("pei_data version mismatch\n"); - - /* Print the MRC version after executing the UEFI PEI stage. */ - u32 version = MCHBAR32(MCHBAR_PEI_VERSION); - printk(BIOS_DEBUG, "MRC Version %d.%d.%d Build %d\n", - version >> 24 , (version >> 16) & 0xff, - (version >> 8) & 0xff, version & 0xff); - - report_memory_config(); - - /* Basic memory sanity test */ - quick_ram_check(); - - if (pei_data->boot_mode != SLEEP_STATE_S3) { - cbmem_initialize_empty(); - stage_cache_create_empty(); - } else { - stage_cache_recover(); - if (cbmem_initialize()) { -#if CONFIG_HAVE_ACPI_RESUME - printk(BIOS_DEBUG, "Failed to recover CBMEM in S3 resume.\n"); - /* Failed S3 resume, reset to come up cleanly */ - reset_system(); -#endif - } - } - - printk(BIOS_DEBUG, "MRC data at %p %d bytes\n", pei_data->data_to_save, - pei_data->data_to_save_size); - - if (pei_data->data_to_save != NULL && pei_data->data_to_save_size > 0) - mrc_cache_stash_data(pei_data->data_to_save, - pei_data->data_to_save_size); - - printk(BIOS_DEBUG, "create cbmem for dimm information\n"); - mem_info = cbmem_add(CBMEM_ID_MEMINFO, sizeof(struct memory_info)); - memcpy(mem_info, &pei_data->meminfo, sizeof(struct memory_info)); - -} diff --git a/src/soc/intel/skylake/romstage/report_platform.c b/src/soc/intel/skylake/romstage/report_platform.c index 713b3e7..fe1a785 100644 --- a/src/soc/intel/skylake/romstage/report_platform.c +++ b/src/soc/intel/skylake/romstage/report_platform.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,77 +15,55 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/cpu.h> #include <arch/io.h> #include <console/console.h> -#include <device/pci.h> -#include <string.h> #include <cpu/x86/msr.h> +#include <device/pci.h> #include <soc/cpu.h> #include <soc/pch.h> #include <soc/pci_devs.h> #include <soc/romstage.h> #include <soc/systemagent.h> +#include <string.h> static struct { u32 cpuid; const char *name; } cpu_table[] = { - { CPUID_HASWELL_A0, "Haswell A0" }, - { CPUID_HASWELL_B0, "Haswell B0" }, - { CPUID_HASWELL_C0, "Haswell C0" }, - { CPUID_HASWELL_ULT_B0, "Haswell ULT B0" }, - { CPUID_HASWELL_ULT, "Haswell ULT C0 or D0" }, - { CPUID_HASWELL_HALO, "Haswell Perf Halo" }, - { CPUID_BROADWELL_C0, "Broadwell C0" }, - { CPUID_BROADWELL_D0, "Broadwell D0" }, - { CPUID_BROADWELL_E0, "Broadwell E0 or F0" }, + { CPUID_SKYLAKE_C0, "Skylake C0" }, + { CPUID_SKYLAKE_D0, "Skylake D0" }, }; static struct { - u8 revid; + u16 mchid; const char *name; -} mch_rev_table[] = { - { MCH_BROADWELL_REV_D0, "Broadwell D0" }, - { MCH_BROADWELL_REV_E0, "Broadwell E0" }, - { MCH_BROADWELL_REV_F0, "Broadwell F0" }, +} mch_table[] = { + { MCH_SKYLAKE_ID_U, "Skylake-U" }, + { MCH_SKYLAKE_ID_Y, "Skylake-Y" }, + { MCH_SKYLAKE_ID_ULX, "Skylake-ULX" }, }; static struct { u16 lpcid; const char *name; } pch_table[] = { - { PCH_LPT_LP_SAMPLE, "LynxPoint LP Sample" }, - { PCH_LPT_LP_PREMIUM, "LynxPoint LP Premium" }, - { PCH_LPT_LP_MAINSTREAM, "LynxPoint LP Mainstream" }, - { PCH_LPT_LP_VALUE, "LynxPoint LP Value" }, - { PCH_WPT_HSW_U_SAMPLE, "Haswell U Sample" }, - { PCH_WPT_BDW_U_SAMPLE, "Broadwell U Sample" }, - { PCH_WPT_BDW_U_PREMIUM, "Broadwell U Premium" }, - { PCH_WPT_BDW_U_BASE, "Broadwell U Base" }, - { PCH_WPT_BDW_Y_SAMPLE, "Broadwell Y Sample" }, - { PCH_WPT_BDW_Y_PREMIUM, "Broadwell Y Premium" }, - { PCH_WPT_BDW_Y_BASE, "Broadwell Y Base" }, - { PCH_WPT_BDW_H, "Broadwell H" }, + { PCH_SPT_LP_SAMPLE, "Skylake LP Sample" }, + { PCH_SPT_LP_U_BASE, "Skylake-U Base" }, + { PCH_SPT_LP_U_PREMIUM, "Skylake-U Premium" }, + { PCH_SPT_LP_Y_PREMIUM, "Skylake-Y Premium" }, }; static struct { u16 igdid; const char *name; } igd_table[] = { - { IGD_HASWELL_ULT_GT1, "Haswell ULT GT1" }, - { IGD_HASWELL_ULT_GT2, "Haswell ULT GT2" }, - { IGD_HASWELL_ULT_GT3, "Haswell ULT GT3" }, - { IGD_BROADWELL_U_GT1, "Broadwell U GT1" }, - { IGD_BROADWELL_U_GT2, "Broadwell U GT2" }, - { IGD_BROADWELL_U_GT3_15W, "Broadwell U GT3 (15W)" }, - { IGD_BROADWELL_U_GT3_28W, "Broadwell U GT3 (28W)" }, - { IGD_BROADWELL_Y_GT2, "Broadwell Y GT2" }, - { IGD_BROADWELL_H_GT2, "Broadwell U GT2" }, - { IGD_BROADWELL_H_GT3, "Broadwell U GT3" }, + { IGD_SKYLAKE_GT1_SULTM, "Skylake ULT GT1"}, + { IGD_SKYLAKE_GT2_SULXM, "Skylake ULX GT2" }, + { IGD_SKYLAKE_GT2_SULTM, "Skylake ULT GT2" }, }; static void report_cpu_info(void) @@ -102,8 +81,8 @@ static void report_cpu_info(void) if (cpuidr.eax < 0x80000004) { strcpy(cpu_string, "Platform info not available"); } else { - u32 *p = (u32*) cpu_string; - for (i = 2; i <= 4 ; i++) { + u32 *p = (u32 *) cpu_string; + for (i = 2; i <= 4; i++) { cpuidr = cpuid(index + i); *p++ = cpuidr.eax; *p++ = cpuidr.ebx; @@ -136,29 +115,27 @@ static void report_cpu_info(void) aes = (cpuidr.ecx & (1 << 25)) ? 1 : 0; txt = (cpuidr.ecx & (1 << 6)) ? 1 : 0; vt = (cpuidr.ecx & (1 << 5)) ? 1 : 0; - printk(BIOS_DEBUG, "CPU: AES %ssupported, TXT %ssupported, " - "VT %ssupported\n", mode[aes], mode[txt], mode[vt]); + printk(BIOS_DEBUG, + "CPU: AES %ssupported, TXT %ssupported, VT %ssupported\n", + mode[aes], mode[txt], mode[vt]); } static void report_mch_info(void) { int i; - u16 mch_device = pci_read_config16(SA_DEV_ROOT, PCI_DEVICE_ID); + u16 mchid = pci_read_config16(SA_DEV_ROOT, PCI_DEVICE_ID); u8 mch_revision = pci_read_config8(SA_DEV_ROOT, PCI_REVISION_ID); const char *mch_type = "Unknown"; - /* Look for string to match the revision for Broadwell U/Y */ - if (mch_device == MCH_BROADWELL_ID_U_Y) { - for (i = 0; i < ARRAY_SIZE(mch_rev_table); i++) { - if (mch_rev_table[i].revid == mch_revision) { - mch_type = mch_rev_table[i].name; - break; - } + for (i = 0; i < ARRAY_SIZE(mch_table); i++) { + if (mch_table[i].mchid == mchid) { + mch_type = mch_table[i].name; + break; } } printk(BIOS_DEBUG, "MCH: device id %04x (rev %02x) is %s\n", - mch_device, mch_revision, mch_type); + mchid, mch_revision, mch_type); } static void report_pch_info(void) diff --git a/src/soc/intel/skylake/romstage/romstage.c b/src/soc/intel/skylake/romstage/romstage.c index c026004..e8bb877 100644 --- a/src/soc/intel/skylake/romstage/romstage.c +++ b/src/soc/intel/skylake/romstage/romstage.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <stddef.h> @@ -24,141 +25,542 @@ #include <arch/cbfs.h> #include <arch/stages.h> #include <arch/early_variables.h> -#include <console/console.h> -#include <cbfs.h> #include <cbmem.h> +#include <chip.h> +#include <console/console.h> #include <cpu/x86/mtrr.h> +#include <device/device.h> +#include <device/pci_def.h> #include <elog.h> +#include <reset.h> #include <romstage_handoff.h> -#include <stage_cache.h> -#include <timestamp.h> -#include <soc/me.h> -#include <soc/pei_data.h> +#include <soc/pci_devs.h> +#include <soc/pei_wrapper.h> #include <soc/pm.h> -#include <soc/reset.h> +#include <soc/serialio.h> #include <soc/romstage.h> #include <soc/spi.h> +#include <stage_cache.h> +#include <timestamp.h> #include <vendorcode/google/chromeos/chromeos.h> -/* Entry from cache-as-ram.inc. */ -void * asmlinkage romstage_main(unsigned long bist, - uint32_t tsc_low, uint32_t tsc_hi) +/* SOC initialization before the console is enabled */ +void soc_pre_console_init(struct romstage_params *params) { - struct romstage_params rp = { - .bist = bist, - .pei_data = NULL, - }; - - post_code(0x30); - - /* Save initial timestamp from bootblock. */ - timestamp_init((((uint64_t)tsc_hi) << 32) | (uint64_t)tsc_low); - - /* Save romstage begin */ - timestamp_add_now(TS_START_ROMSTAGE); - /* System Agent Early Initialization */ systemagent_early_init(); - /* PCH Early Initialization */ - pch_early_init(); - - /* Call into mainboard pre console init. Needed to enable serial port - on IT8772 */ - mainboard_pre_console_init(); - - /* Start console drivers */ - console_init(); - - /* Get power state */ - rp.power_state = fill_power_state(); - - /* Print useful platform information */ - report_platform_info(); - - /* Set CPU frequency to maximum */ - set_max_freq(); - - /* Call into mainboard. */ - mainboard_romstage_entry(&rp); - -#if CONFIG_CHROMEOS - save_chromeos_gpios(); -#endif - - return setup_stack_and_mttrs(); + if (IS_ENABLED(CONFIG_INTEL_PCH_UART_CONSOLE)) + pch_uart_init(); } -static inline void chromeos_init(int prev_sleep_state) +/* SOC initialization before RAM is enabled */ +void soc_pre_ram_init(struct romstage_params *params) { -#if CONFIG_CHROMEOS - /* Normalize the sleep state to what init_chromeos() wants for S3: 2 */ - init_chromeos(prev_sleep_state == SLEEP_STATE_S3 ? 2 : 0); -#endif + /* Prepare to initialize memory */ + soc_fill_pei_data(params->pei_data); } -/* Entry from the mainboard. */ -void romstage_common(struct romstage_params *params) +void soc_romstage_init(struct romstage_params *params) { - struct romstage_handoff *handoff; - - post_code(0x32); - - timestamp_add_now(TS_BEFORE_INITRAM); - - params->pei_data->boot_mode = params->power_state->prev_sleep_state; - -#if CONFIG_ELOG_BOOT_COUNT - if (params->power_state->prev_sleep_state != SLEEP_STATE_S3) - boot_count_increment(); -#endif - - /* Print ME state before MRC */ - intel_me_status(); - - /* Save ME HSIO version */ - intel_me_hsio_version(&params->power_state->hsio_version, - &params->power_state->hsio_checksum); - - /* Initialize RAM */ - raminit(params->pei_data); - - timestamp_add_now(TS_AFTER_INITRAM); - - handoff = romstage_handoff_find_or_add(); - if (handoff != NULL) - handoff->s3_resume = (params->power_state->prev_sleep_state == - SLEEP_STATE_S3); - else - printk(BIOS_DEBUG, "Romstage handoff structure not added!\n"); - - chromeos_init(params->power_state->prev_sleep_state); + pch_early_init(); } -void asmlinkage romstage_after_car(void) +#if IS_ENABLED(CONFIG_CHROMEOS) +int vboot_get_sw_write_protect(void) { - timestamp_add_now(TS_END_ROMSTAGE); + u8 status; - /* Load the ramstage. */ - copy_and_run(); - while (1); + /* Return unprotected status if status read fails. */ + return early_spi_read_wpsr(&status) ? 0 : !!(status & 0x80); } +#endif -void ramstage_cache_invalid(void) +/* UPD parameters to be initialized before MemoryInit */ +void soc_memory_init_params(MEMORY_INIT_UPD *params) { -#if CONFIG_RESET_ON_INVALID_RAMSTAGE_CACHE - /* Perform cold reset on invalid ramstage cache. */ - reset_system(); -#endif + const struct device *dev; + const struct soc_intel_skylake_config *config; + int i; + + /* Set the parameters for MemoryInit */ + dev = dev_find_slot(0, PCI_DEVFN(PCH_DEV_SLOT_LPC, 0)); + config = dev->chip_info; + + for (i = 0; i < PchSerialIoIndexMax; i++) + params->SerialIoDevMode[i] = config->SerialIoDevMode[i]; + + params->MmioSize = 0x800; /* 2GB in MB */ + params->TsegSize = CONFIG_SMM_TSEG_SIZE; + params->IedSize = config->IedSize; + params->ProbelessTrace = config->ProbelessTrace; + params->EnableLan = config->EnableLan; + params->EnableSata = config->EnableSata; + params->SataMode = config->SataMode; + params->SataSalpSupport = config->SataSalpSupport; + params->SataPortsEnable[0] = config->SataPortsEnable[0]; + params->SsicPortEnable = config->SsicPortEnable; + params->EnableTraceHub = config->EnableTraceHub; + params->SmbusEnable = config->SmbusEnable; + params->Cio2Enable = config->Cio2Enable; + params->ScsEmmcEnabled = config->ScsEmmcEnabled; + params->ScsEmmcHs400Enabled = config->ScsEmmcHs400Enabled; + params->ScsSdCardEnabled = config->ScsSdCardEnabled; + params->IshEnable = 0; + params->EnableAzalia = config->EnableAzalia; + params->IoBufferOwnership = config->IoBufferOwnership; + params->DspEnable = config->DspEnable; + params->XdciEnable = config->XdciEnable; } -#if CONFIG_CHROMEOS -int vboot_get_sw_write_protect(void) +void soc_display_memory_init_params(const MEMORY_INIT_UPD *old, + MEMORY_INIT_UPD *new) { - u8 status; - /* Return unprotected status if status read fails. */ - return (early_spi_read_wpsr(&status) ? 0 : !!(status & 0x80)); + /* Display the parameters for MemoryInit */ + printk(BIOS_SPEW, "UPD values for MemoryInit:\n"); + + soc_display_upd_value("PlatformMemorySize", 8, + old->PlatformMemorySize, new->PlatformMemorySize); + soc_display_upd_value("MemorySpdPtr00", 4, old->MemorySpdPtr00, + new->MemorySpdPtr00); + soc_display_upd_value("MemorySpdPtr01", 4, old->MemorySpdPtr01, + new->MemorySpdPtr01); + soc_display_upd_value("MemorySpdPtr10", 4, old->MemorySpdPtr10, + new->MemorySpdPtr10); + soc_display_upd_value("MemorySpdPtr11", 4, old->MemorySpdPtr11, + new->MemorySpdPtr11); + soc_display_upd_value("MemorySpdDataLen", 2, old->MemorySpdDataLen, + new->MemorySpdDataLen); + soc_display_upd_value("DqByteMapCh0[0]", 1, old->DqByteMapCh0[0], + new->DqByteMapCh0[0]); + soc_display_upd_value("DqByteMapCh0[1]", 1, old->DqByteMapCh0[1], + new->DqByteMapCh0[1]); + soc_display_upd_value("DqByteMapCh0[2]", 1, old->DqByteMapCh0[2], + new->DqByteMapCh0[2]); + soc_display_upd_value("DqByteMapCh0[3]", 1, old->DqByteMapCh0[3], + new->DqByteMapCh0[3]); + soc_display_upd_value("DqByteMapCh0[4]", 1, old->DqByteMapCh0[4], + new->DqByteMapCh0[4]); + soc_display_upd_value("DqByteMapCh0[5]", 1, old->DqByteMapCh0[5], + new->DqByteMapCh0[5]); + soc_display_upd_value("DqByteMapCh0[6]", 1, old->DqByteMapCh0[6], + new->DqByteMapCh0[6]); + soc_display_upd_value("DqByteMapCh0[7]", 1, old->DqByteMapCh0[7], + new->DqByteMapCh0[7]); + soc_display_upd_value("DqByteMapCh0[8]", 1, old->DqByteMapCh0[8], + new->DqByteMapCh0[8]); + soc_display_upd_value("DqByteMapCh0[9]", 1, old->DqByteMapCh0[9], + new->DqByteMapCh0[9]); + soc_display_upd_value("DqByteMapCh0[10]", 1, old->DqByteMapCh0[10], + new->DqByteMapCh0[10]); + soc_display_upd_value("DqByteMapCh0[11]", 1, old->DqByteMapCh0[11], + new->DqByteMapCh0[11]); + soc_display_upd_value("DqByteMapCh1[0]", 1, old->DqByteMapCh1[0], + new->DqByteMapCh1[0]); + soc_display_upd_value("DqByteMapCh1[1]", 1, old->DqByteMapCh1[1], + new->DqByteMapCh1[1]); + soc_display_upd_value("DqByteMapCh1[2]", 1, old->DqByteMapCh1[2], + new->DqByteMapCh1[2]); + soc_display_upd_value("DqByteMapCh1[3]", 1, old->DqByteMapCh1[3], + new->DqByteMapCh1[3]); + soc_display_upd_value("DqByteMapCh1[4]", 1, old->DqByteMapCh1[4], + new->DqByteMapCh1[4]); + soc_display_upd_value("DqByteMapCh1[5]", 1, old->DqByteMapCh1[5], + new->DqByteMapCh1[5]); + soc_display_upd_value("DqByteMapCh1[6]", 1, old->DqByteMapCh1[6], + new->DqByteMapCh1[6]); + soc_display_upd_value("DqByteMapCh1[7]", 1, old->DqByteMapCh1[7], + new->DqByteMapCh1[7]); + soc_display_upd_value("DqByteMapCh1[8]", 1, old->DqByteMapCh1[8], + new->DqByteMapCh1[8]); + soc_display_upd_value("DqByteMapCh1[9]", 1, old->DqByteMapCh1[9], + new->DqByteMapCh1[9]); + soc_display_upd_value("DqByteMapCh1[10]", 1, old->DqByteMapCh1[10], + new->DqByteMapCh1[10]); + soc_display_upd_value("DqByteMapCh1[11]", 1, old->DqByteMapCh1[11], + new->DqByteMapCh1[11]); + soc_display_upd_value("DqsMapCpu2DramCh0[0]", 1, + old->DqsMapCpu2DramCh0[0], new->DqsMapCpu2DramCh0[0]); + soc_display_upd_value("DqsMapCpu2DramCh0[1]", 1, + old->DqsMapCpu2DramCh0[1], new->DqsMapCpu2DramCh0[1]); + soc_display_upd_value("DqsMapCpu2DramCh0[2]", 1, + old->DqsMapCpu2DramCh0[2], new->DqsMapCpu2DramCh0[2]); + soc_display_upd_value("DqsMapCpu2DramCh0[3]", 1, + old->DqsMapCpu2DramCh0[3], new->DqsMapCpu2DramCh0[3]); + soc_display_upd_value("DqsMapCpu2DramCh0[4]", 1, + old->DqsMapCpu2DramCh0[4], new->DqsMapCpu2DramCh0[4]); + soc_display_upd_value("DqsMapCpu2DramCh0[5]", 1, + old->DqsMapCpu2DramCh0[5], new->DqsMapCpu2DramCh0[5]); + soc_display_upd_value("DqsMapCpu2DramCh0[6]", 1, + old->DqsMapCpu2DramCh0[6], new->DqsMapCpu2DramCh0[6]); + soc_display_upd_value("DqsMapCpu2DramCh0[7]", 1, + old->DqsMapCpu2DramCh0[7], new->DqsMapCpu2DramCh0[7]); + soc_display_upd_value("DqsMapCpu2DramCh1[0]", 1, + old->DqsMapCpu2DramCh1[0], new->DqsMapCpu2DramCh1[0]); + soc_display_upd_value("DqsMapCpu2DramCh1[1]", 1, + old->DqsMapCpu2DramCh1[1], new->DqsMapCpu2DramCh1[1]); + soc_display_upd_value("DqsMapCpu2DramCh1[2]", 1, + old->DqsMapCpu2DramCh1[2], new->DqsMapCpu2DramCh1[2]); + soc_display_upd_value("DqsMapCpu2DramCh1[3]", 1, + old->DqsMapCpu2DramCh1[3], new->DqsMapCpu2DramCh1[3]); + soc_display_upd_value("DqsMapCpu2DramCh1[4]", 1, + old->DqsMapCpu2DramCh1[4], new->DqsMapCpu2DramCh1[4]); + soc_display_upd_value("DqsMapCpu2DramCh1[5]", 1, + old->DqsMapCpu2DramCh1[5], new->DqsMapCpu2DramCh1[5]); + soc_display_upd_value("DqsMapCpu2DramCh1[6]", 1, + old->DqsMapCpu2DramCh1[6], new->DqsMapCpu2DramCh1[6]); + soc_display_upd_value("DqsMapCpu2DramCh1[7]", 1, + old->DqsMapCpu2DramCh1[7], new->DqsMapCpu2DramCh1[7]); + soc_display_upd_value("DqPinsInterleaved", 1, + old->DqPinsInterleaved, new->DqPinsInterleaved); + soc_display_upd_value("RcompResistor[0]", 2, old->RcompResistor[0], + new->RcompResistor[0]); + soc_display_upd_value("RcompResistor[1]", 2, old->RcompResistor[1], + new->RcompResistor[1]); + soc_display_upd_value("RcompResistor[2]", 2, old->RcompResistor[2], + new->RcompResistor[2]); + soc_display_upd_value("RcompTarget[0]", 1, old->RcompTarget[0], + new->RcompTarget[0]); + soc_display_upd_value("RcompTarget[1]", 1, old->RcompTarget[1], + new->RcompTarget[1]); + soc_display_upd_value("RcompTarget[2]", 1, old->RcompTarget[2], + new->RcompTarget[2]); + soc_display_upd_value("RcompTarget[3]", 1, old->RcompTarget[3], + new->RcompTarget[3]); + soc_display_upd_value("RcompTarget[4]", 1, old->RcompTarget[4], + new->RcompTarget[4]); + soc_display_upd_value("CaVrefConfig", 1, old->CaVrefConfig, + new->CaVrefConfig); + soc_display_upd_value("SmramMask", 1, old->SmramMask, new->SmramMask); + soc_display_upd_value("MrcFastBoot", 1, old->MrcFastBoot, + new->MrcFastBoot); + soc_display_upd_value("IedSize", 4, old->IedSize, new->IedSize); + soc_display_upd_value("TsegSize", 4, old->TsegSize, new->TsegSize); + soc_display_upd_value("MmioSize", 2, old->MmioSize, new->MmioSize); + soc_display_upd_value("ProbelessTrace", 1, old->ProbelessTrace, + new->ProbelessTrace); + soc_display_upd_value("EnableLan", 1, old->EnableLan, new->EnableLan); + soc_display_upd_value("EnableSata", 1, old->EnableSata, + new->EnableSata); + soc_display_upd_value("SataMode", 1, old->SataMode, new->SataMode); + soc_display_upd_value("SataSalpSupport", 1, old->SataSalpSupport, + new->SataSalpSupport); + soc_display_upd_value("SataPortsEnable[0]", 1, old->SataPortsEnable[0], + new->SataPortsEnable[0]); + soc_display_upd_value("SataPortsEnable[1]", 1, old->SataPortsEnable[1], + new->SataPortsEnable[1]); + soc_display_upd_value("SataPortsEnable[2]", 1, old->SataPortsEnable[2], + new->SataPortsEnable[2]); + soc_display_upd_value("SataPortsEnable[3]", 1, old->SataPortsEnable[3], + new->SataPortsEnable[3]); + soc_display_upd_value("SataPortsEnable[4]", 1, old->SataPortsEnable[4], + new->SataPortsEnable[4]); + soc_display_upd_value("SataPortsEnable[5]", 1, old->SataPortsEnable[5], + new->SataPortsEnable[5]); + soc_display_upd_value("SataPortsEnable[6]", 1, old->SataPortsEnable[6], + new->SataPortsEnable[6]); + soc_display_upd_value("SataPortsEnable[7]", 1, old->SataPortsEnable[7], + new->SataPortsEnable[7]); + soc_display_upd_value("SataPortsDevSlp[0]", 1, old->SataPortsDevSlp[0], + new->SataPortsDevSlp[0]); + soc_display_upd_value("SataPortsDevSlp[1]", 1, old->SataPortsDevSlp[1], + new->SataPortsDevSlp[1]); + soc_display_upd_value("SataPortsDevSlp[2]", 1, old->SataPortsDevSlp[2], + new->SataPortsDevSlp[2]); + soc_display_upd_value("SataPortsDevSlp[3]", 1, old->SataPortsDevSlp[3], + new->SataPortsDevSlp[3]); + soc_display_upd_value("SataPortsDevSlp[4]", 1, old->SataPortsDevSlp[4], + new->SataPortsDevSlp[4]); + soc_display_upd_value("SataPortsDevSlp[5]", 1, old->SataPortsDevSlp[5], + new->SataPortsDevSlp[5]); + soc_display_upd_value("SataPortsDevSlp[6]", 1, old->SataPortsDevSlp[6], + new->SataPortsDevSlp[6]); + soc_display_upd_value("SataPortsDevSlp[7]", 1, old->SataPortsDevSlp[7], + new->SataPortsDevSlp[7]); + soc_display_upd_value("EnableAzalia", 1, old->EnableAzalia, + new->EnableAzalia); + soc_display_upd_value("DspEnable", 1, old->DspEnable, new->DspEnable); + soc_display_upd_value("IoBufferOwnership", 1, old->IoBufferOwnership, + new->IoBufferOwnership); + soc_display_upd_value("EnableTraceHub", 1, old->EnableTraceHub, + new->EnableTraceHub); + soc_display_upd_value("PcieRpEnable[0]", 1, old->PcieRpEnable[0], + new->PcieRpEnable[0]); + soc_display_upd_value("PcieRpEnable[1]", 1, old->PcieRpEnable[1], + new->PcieRpEnable[1]); + soc_display_upd_value("PcieRpEnable[2]", 1, old->PcieRpEnable[2], + new->PcieRpEnable[2]); + soc_display_upd_value("PcieRpEnable[3]", 1, old->PcieRpEnable[3], + new->PcieRpEnable[3]); + soc_display_upd_value("PcieRpEnable[4]", 1, old->PcieRpEnable[4], + new->PcieRpEnable[4]); + soc_display_upd_value("PcieRpEnable[5]", 1, old->PcieRpEnable[5], + new->PcieRpEnable[5]); + soc_display_upd_value("PcieRpEnable[6]", 1, old->PcieRpEnable[6], + new->PcieRpEnable[6]); + soc_display_upd_value("PcieRpEnable[7]", 1, old->PcieRpEnable[7], + new->PcieRpEnable[7]); + soc_display_upd_value("PcieRpEnable[8]", 1, old->PcieRpEnable[8], + new->PcieRpEnable[8]); + soc_display_upd_value("PcieRpEnable[9]", 1, old->PcieRpEnable[9], + new->PcieRpEnable[9]); + soc_display_upd_value("PcieRpEnable[10]", 1, old->PcieRpEnable[10], + new->PcieRpEnable[10]); + soc_display_upd_value("PcieRpEnable[11]", 1, old->PcieRpEnable[11], + new->PcieRpEnable[11]); + soc_display_upd_value("PcieRpEnable[12]", 1, old->PcieRpEnable[12], + new->PcieRpEnable[12]); + soc_display_upd_value("PcieRpEnable[13]", 1, old->PcieRpEnable[13], + new->PcieRpEnable[13]); + soc_display_upd_value("PcieRpEnable[14]", 1, old->PcieRpEnable[14], + new->PcieRpEnable[14]); + soc_display_upd_value("PcieRpEnable[15]", 1, old->PcieRpEnable[15], + new->PcieRpEnable[15]); + soc_display_upd_value("PcieRpEnable[16]", 1, old->PcieRpEnable[16], + new->PcieRpEnable[16]); + soc_display_upd_value("PcieRpEnable[17]", 1, old->PcieRpEnable[17], + new->PcieRpEnable[17]); + soc_display_upd_value("PcieRpEnable[18]", 1, old->PcieRpEnable[18], + new->PcieRpEnable[18]); + soc_display_upd_value("PcieRpEnable[19]", 1, old->PcieRpEnable[19], + new->PcieRpEnable[19]); + soc_display_upd_value("PcieRpClkReqSupport[0]", 1, + old->PcieRpClkReqSupport[0], + new->PcieRpClkReqSupport[0]); + soc_display_upd_value("PcieRpClkReqSupport[1]", 1, + old->PcieRpClkReqSupport[1], + new->PcieRpClkReqSupport[1]); + soc_display_upd_value("PcieRpClkReqSupport[2]", 1, + old->PcieRpClkReqSupport[2], + new->PcieRpClkReqSupport[2]); + soc_display_upd_value("PcieRpClkReqSupport[3]", 1, + old->PcieRpClkReqSupport[3], + new->PcieRpClkReqSupport[3]); + soc_display_upd_value("PcieRpClkReqSupport[4]", 1, + old->PcieRpClkReqSupport[4], + new->PcieRpClkReqSupport[4]); + soc_display_upd_value("PcieRpClkReqSupport[5]", 1, + old->PcieRpClkReqSupport[5], + new->PcieRpClkReqSupport[5]); + soc_display_upd_value("PcieRpClkReqSupport[6]", 1, + old->PcieRpClkReqSupport[6], + new->PcieRpClkReqSupport[6]); + soc_display_upd_value("PcieRpClkReqSupport[7]", 1, + old->PcieRpClkReqSupport[7], + new->PcieRpClkReqSupport[7]); + soc_display_upd_value("PcieRpClkReqSupport[8]", 1, + old->PcieRpClkReqSupport[8], + new->PcieRpClkReqSupport[8]); + soc_display_upd_value("PcieRpClkReqSupport[9]", 1, + old->PcieRpClkReqSupport[9], + new->PcieRpClkReqSupport[9]); + soc_display_upd_value("PcieRpClkReqSupport[10]", 1, + old->PcieRpClkReqSupport[10], + new->PcieRpClkReqSupport[10]); + soc_display_upd_value("PcieRpClkReqSupport[11]", 1, + old->PcieRpClkReqSupport[11], + new->PcieRpClkReqSupport[11]); + soc_display_upd_value("PcieRpClkReqSupport[12]", 1, + old->PcieRpClkReqSupport[12], + new->PcieRpClkReqSupport[12]); + soc_display_upd_value("PcieRpClkReqSupport[13]", 1, + old->PcieRpClkReqSupport[13], + new->PcieRpClkReqSupport[13]); + soc_display_upd_value("PcieRpClkReqSupport[14]", 1, + old->PcieRpClkReqSupport[14], + new->PcieRpClkReqSupport[14]); + soc_display_upd_value("PcieRpClkReqSupport[15]", 1, + old->PcieRpClkReqSupport[15], + new->PcieRpClkReqSupport[15]); + soc_display_upd_value("PcieRpClkReqSupport[16]", 1, + old->PcieRpClkReqSupport[16], + new->PcieRpClkReqSupport[16]); + soc_display_upd_value("PcieRpClkReqSupport[17]", 1, + old->PcieRpClkReqSupport[17], + new->PcieRpClkReqSupport[17]); + soc_display_upd_value("PcieRpClkReqSupport[18]", 1, + old->PcieRpClkReqSupport[18], + new->PcieRpClkReqSupport[18]); + soc_display_upd_value("PcieRpClkReqSupport[19]", 1, + old->PcieRpClkReqSupport[19], + new->PcieRpClkReqSupport[19]); + soc_display_upd_value("PcieRpClkReqNumber[0]", 1, + old->PcieRpClkReqNumber[0], + new->PcieRpClkReqNumber[0]); + soc_display_upd_value("PcieRpClkReqNumber[1]", 1, + old->PcieRpClkReqNumber[1], + new->PcieRpClkReqNumber[1]); + soc_display_upd_value("PcieRpClkReqNumber[2]", 1, + old->PcieRpClkReqNumber[2], + new->PcieRpClkReqNumber[2]); + soc_display_upd_value("PcieRpClkReqNumber[3]", 1, + old->PcieRpClkReqNumber[3], + new->PcieRpClkReqNumber[3]); + soc_display_upd_value("PcieRpClkReqNumber[4]", 1, + old->PcieRpClkReqNumber[4], + new->PcieRpClkReqNumber[4]); + soc_display_upd_value("PcieRpClkReqNumber[5]", 1, + old->PcieRpClkReqNumber[5], + new->PcieRpClkReqNumber[5]); + soc_display_upd_value("PcieRpClkReqNumber[6]", 1, + old->PcieRpClkReqNumber[6], + new->PcieRpClkReqNumber[6]); + soc_display_upd_value("PcieRpClkReqNumber[7]", 1, + old->PcieRpClkReqNumber[7], + new->PcieRpClkReqNumber[7]); + soc_display_upd_value("PcieRpClkReqNumber[8]", 1, + old->PcieRpClkReqNumber[8], + new->PcieRpClkReqNumber[8]); + soc_display_upd_value("PcieRpClkReqNumber[9]", 1, + old->PcieRpClkReqNumber[9], + new->PcieRpClkReqNumber[9]); + soc_display_upd_value("PcieRpClkReqNumber[10]", 1, + old->PcieRpClkReqNumber[10], + new->PcieRpClkReqNumber[10]); + soc_display_upd_value("PcieRpClkReqNumber[11]", 1, + old->PcieRpClkReqNumber[11], + new->PcieRpClkReqNumber[11]); + soc_display_upd_value("PcieRpClkReqNumber[12]", 1, + old->PcieRpClkReqNumber[12], + new->PcieRpClkReqNumber[12]); + soc_display_upd_value("PcieRpClkReqNumber[13]", 1, + old->PcieRpClkReqNumber[13], + new->PcieRpClkReqNumber[13]); + soc_display_upd_value("PcieRpClkReqNumber[14]", 1, + old->PcieRpClkReqNumber[14], + new->PcieRpClkReqNumber[14]); + soc_display_upd_value("PcieRpClkReqNumber[15]", 1, + old->PcieRpClkReqNumber[15], + new->PcieRpClkReqNumber[15]); + soc_display_upd_value("PcieRpClkReqNumber[16]", 1, + old->PcieRpClkReqNumber[16], + new->PcieRpClkReqNumber[16]); + soc_display_upd_value("PcieRpClkReqNumber[17]", 1, + old->PcieRpClkReqNumber[17], + new->PcieRpClkReqNumber[17]); + soc_display_upd_value("PcieRpClkReqNumber[18]", 1, + old->PcieRpClkReqNumber[18], + new->PcieRpClkReqNumber[18]); + soc_display_upd_value("PcieRpClkReqNumber[19]", 1, + old->PcieRpClkReqNumber[19], + new->PcieRpClkReqNumber[19]); + soc_display_upd_value("PortUsb20Enable[0]", 1, old->PortUsb20Enable[0], + new->PortUsb20Enable[0]); + soc_display_upd_value("PortUsb20Enable[1]", 1, old->PortUsb20Enable[1], + new->PortUsb20Enable[1]); + soc_display_upd_value("PortUsb20Enable[2]", 1, old->PortUsb20Enable[2], + new->PortUsb20Enable[2]); + soc_display_upd_value("PortUsb20Enable[3]", 1, old->PortUsb20Enable[3], + new->PortUsb20Enable[3]); + soc_display_upd_value("PortUsb20Enable[4]", 1, old->PortUsb20Enable[4], + new->PortUsb20Enable[4]); + soc_display_upd_value("PortUsb20Enable[5]", 1, old->PortUsb20Enable[5], + new->PortUsb20Enable[5]); + soc_display_upd_value("PortUsb20Enable[6]", 1, old->PortUsb20Enable[6], + new->PortUsb20Enable[6]); + soc_display_upd_value("PortUsb20Enable[7]", 1, old->PortUsb20Enable[7], + new->PortUsb20Enable[7]); + soc_display_upd_value("PortUsb20Enable[8]", 1, old->PortUsb20Enable[8], + new->PortUsb20Enable[8]); + soc_display_upd_value("PortUsb20Enable[9]", 1, old->PortUsb20Enable[9], + new->PortUsb20Enable[9]); + soc_display_upd_value("PortUsb20Enable[10]", 1, + old->PortUsb20Enable[10], + new->PortUsb20Enable[10]); + soc_display_upd_value("PortUsb20Enable[11]", 1, + old->PortUsb20Enable[11], + new->PortUsb20Enable[11]); + soc_display_upd_value("PortUsb20Enable[12]", 1, + old->PortUsb20Enable[12], + new->PortUsb20Enable[12]); + soc_display_upd_value("PortUsb20Enable[13]", 1, + old->PortUsb20Enable[13], + new->PortUsb20Enable[13]); + soc_display_upd_value("PortUsb20Enable[14]", 1, + old->PortUsb20Enable[14], + new->PortUsb20Enable[14]); + soc_display_upd_value("PortUsb20Enable[15]", 1, + old->PortUsb20Enable[15], + new->PortUsb20Enable[15]); + soc_display_upd_value("PortUsb30Enable[0]", 1, old->PortUsb30Enable[0], + new->PortUsb30Enable[0]); + soc_display_upd_value("PortUsb30Enable[1]", 1, old->PortUsb30Enable[1], + new->PortUsb30Enable[1]); + soc_display_upd_value("PortUsb30Enable[2]", 1, old->PortUsb30Enable[2], + new->PortUsb30Enable[2]); + soc_display_upd_value("PortUsb30Enable[3]", 1, old->PortUsb30Enable[3], + new->PortUsb30Enable[3]); + soc_display_upd_value("PortUsb30Enable[4]", 1, old->PortUsb30Enable[4], + new->PortUsb30Enable[4]); + soc_display_upd_value("PortUsb30Enable[5]", 1, old->PortUsb30Enable[5], + new->PortUsb30Enable[5]); + soc_display_upd_value("PortUsb30Enable[6]", 1, old->PortUsb30Enable[6], + new->PortUsb30Enable[6]); + soc_display_upd_value("PortUsb30Enable[7]", 1, old->PortUsb30Enable[7], + new->PortUsb30Enable[7]); + soc_display_upd_value("PortUsb30Enable[8]", 1, old->PortUsb30Enable[8], + new->PortUsb30Enable[8]); + soc_display_upd_value("PortUsb30Enable[9]", 1, old->PortUsb30Enable[9], + new->PortUsb30Enable[9]); + soc_display_upd_value("XdciEnable", 1, old->XdciEnable, + new->XdciEnable); + soc_display_upd_value("SsicPortEnable", 1, old->SsicPortEnable, + new->SsicPortEnable); + soc_display_upd_value("SmbusEnable", 1, old->SmbusEnable, + new->SmbusEnable); + soc_display_upd_value("SerialIoDevMode[0]", 1, old->SerialIoDevMode[0], + new->SerialIoDevMode[0]); + soc_display_upd_value("SerialIoDevMode[1]", 1, old->SerialIoDevMode[1], + new->SerialIoDevMode[1]); + soc_display_upd_value("SerialIoDevMode[2]", 1, old->SerialIoDevMode[2], + new->SerialIoDevMode[2]); + soc_display_upd_value("SerialIoDevMode[3]", 1, old->SerialIoDevMode[3], + new->SerialIoDevMode[3]); + soc_display_upd_value("SerialIoDevMode[4]", 1, old->SerialIoDevMode[4], + new->SerialIoDevMode[4]); + soc_display_upd_value("SerialIoDevMode[5]", 1, old->SerialIoDevMode[5], + new->SerialIoDevMode[5]); + soc_display_upd_value("SerialIoDevMode[6]", 1, old->SerialIoDevMode[6], + new->SerialIoDevMode[6]); + soc_display_upd_value("SerialIoDevMode[7]", 1, old->SerialIoDevMode[7], + new->SerialIoDevMode[7]); + soc_display_upd_value("SerialIoDevMode[8]", 1, old->SerialIoDevMode[8], + new->SerialIoDevMode[8]); + soc_display_upd_value("SerialIoDevMode[9]", 1, old->SerialIoDevMode[9], + new->SerialIoDevMode[9]); + soc_display_upd_value("SerialIoDevMode[10]", 1, + old->SerialIoDevMode[10], + new->SerialIoDevMode[10]); + soc_display_upd_value("Cio2Enable", 1, old->Cio2Enable, + new->Cio2Enable); + soc_display_upd_value("ScsEmmcEnabled", 1, old->ScsEmmcEnabled, + new->ScsEmmcEnabled); + soc_display_upd_value("ScsEmmcHs400Enabled", 1, + old->ScsEmmcHs400Enabled, + new->ScsEmmcHs400Enabled); + soc_display_upd_value("ScsSdCardEnabled", 1, old->ScsSdCardEnabled, + new->ScsSdCardEnabled); + soc_display_upd_value("IshEnable", 1, old->IshEnable, new->IshEnable); + soc_display_upd_value("ShowSpiController", 1, old->ShowSpiController, + new->ShowSpiController); + soc_display_upd_value("PttSwitch", 1, old->PttSwitch, new->PttSwitch); + soc_display_upd_value("HeciTimeouts", 1, old->HeciTimeouts, + new->HeciTimeouts); + soc_display_upd_value("HsioMessaging", 1, old->HsioMessaging, + new->HsioMessaging); + soc_display_upd_value("Heci3Enabled", 1, old->Heci3Enabled, + new->Heci3Enabled); + soc_display_upd_value("IgdDvmt50PreAlloc", 1, old->IgdDvmt50PreAlloc, + new->IgdDvmt50PreAlloc); + soc_display_upd_value("PrimaryDisplay", 1, old->PrimaryDisplay, + new->PrimaryDisplay); + soc_display_upd_value("InternalGfx", 1, old->InternalGfx, + new->InternalGfx); + soc_display_upd_value("ApertureSize", 1, old->ApertureSize, + new->ApertureSize); + soc_display_upd_value("SkipExtGfxScan", 1, old->SkipExtGfxScan, + new->SkipExtGfxScan); + soc_display_upd_value("ScanExtGfxForLegacyOpRom", 1, + old->ScanExtGfxForLegacyOpRom, + new->ScanExtGfxForLegacyOpRom); } - -#endif -void __attribute__((weak)) mainboard_pre_console_init(void) {} diff --git a/src/soc/intel/skylake/romstage/smbus.c b/src/soc/intel/skylake/romstage/smbus.c index f09459b..b72255f 100644 --- a/src/soc/intel/skylake/romstage/smbus.c +++ b/src/soc/intel/skylake/romstage/smbus.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/io.h> diff --git a/src/soc/intel/skylake/romstage/spi.c b/src/soc/intel/skylake/romstage/spi.c index a2c5d33..206350b 100644 --- a/src/soc/intel/skylake/romstage/spi.c +++ b/src/soc/intel/skylake/romstage/spi.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,16 +15,13 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/io.h> #include <console/console.h> -#include <device/pci_ids.h> -#include <device/pci_def.h> #include <delay.h> #include <soc/spi.h> -#include <soc/rcba.h> #include <soc/romstage.h> #define SPI_DELAY 10 /* 10us */ @@ -31,43 +29,47 @@ static int early_spi_read_block(u32 offset, u8 size, u8 *buffer) { - u32 *ptr32 = (u32*)buffer; + u32 *ptr32 = (u32 *)buffer; u32 i; + u16 hsfs, hsfc; + void *spibar = get_spi_bar(); /* Clear status bits */ - SPIBAR16(SPIBAR_HSFS) |= SPIBAR_HSFS_AEL | SPIBAR_HSFS_FCERR | - SPIBAR_HSFS_FDONE; + hsfs = read16(spibar + SPIBAR_HSFS); + write16(spibar + SPIBAR_HSFS, hsfs | SPIBAR_HSFS_AEL | + SPIBAR_HSFS_FCERR | SPIBAR_HSFS_FDONE); - if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { + if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { printk(BIOS_ERR, "SPI ERROR: transaction in progress\n"); return -1; } /* Set flash address */ - SPIBAR32(SPIBAR_FADDR) = offset; + write32(spibar + SPIBAR_FADDR, offset); /* Setup read transaction */ - SPIBAR16(SPIBAR_HSFC) = SPIBAR_HSFC_BYTE_COUNT(size) | - SPIBAR_HSFC_CYCLE_READ; + write16(spibar + SPIBAR_HSFC, SPIBAR_HSFC_BYTE_COUNT(size) | + SPIBAR_HSFC_CYCLE_READ); - /* Start transaction */ - SPIBAR16(SPIBAR_HSFC) |= SPIBAR_HSFC_GO; + /* Start transactinon */ + hsfc = read16(spibar + SPIBAR_HSFC); + write16(spibar + SPIBAR_HSFC, hsfc | SPIBAR_HSFC_GO); /* Wait for completion */ for (i = 0; i < SPI_RETRY; i++) { - if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { + if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { /* Cycle in progress, wait 1ms */ udelay(SPI_DELAY); continue; } - if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_AEL) { + if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_AEL) { printk(BIOS_ERR, "SPI ERROR: Access Error\n"); return -1; } - if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_FCERR) { + if (read16(spibar + SPIBAR_HSFS) & SPIBAR_HSFS_FCERR) { printk(BIOS_ERR, "SPI ERROR: Flash Cycle Error\n"); return -1; } @@ -80,14 +82,18 @@ static int early_spi_read_block(u32 offset, u8 size, u8 *buffer) } /* Read the data */ - for (i = 0; i < size; i+=sizeof(u32)) { + for (i = 0; i < size; i += sizeof(u32)) { if (size-i >= 4) { /* reading >= dword */ - *ptr32++ = SPIBAR32(SPIBAR_FDATA(i/sizeof(u32))); + *ptr32++ = read32(spibar + + SPIBAR_FDATA(i/sizeof(u32))); } else { /* reading < dword */ - u8 j, *ptr8 = (u8*)ptr32; - u32 temp = SPIBAR32(SPIBAR_FDATA(i/sizeof(u32))); + u8 j, *ptr8 = (u8 *)ptr32; + u32 temp; + + temp = read32(spibar + + SPIBAR_FDATA(i/sizeof(u32))); for (j = 0; j < (size-i); j++) { *ptr8++ = temp & 0xff; temp >>= 8; @@ -122,18 +128,19 @@ int early_spi_read(u32 offset, u32 size, u8 *buffer) int early_spi_read_wpsr(u8 *sr) { int retry; + void *spibar = get_spi_bar(); /* No address associated with rdsr */ - SPIBAR8(SPIBAR_OPTYPE) = 0x0; + write8(spibar + SPIBAR_OPTYPE, 0x0); /* Setup opcode[0] = read wpsr */ - SPIBAR8(SPIBAR_OPMENU_LOWER) = 0x5; + write8(spibar + SPIBAR_OPMENU_LOWER, 0x5); /* Start transaction */ - SPIBAR16(SPIBAR_SSFC) = SPIBAR_SSFC_DATA | SPIBAR_SSFC_GO; + write16(spibar + SPIBAR_SSFC, SPIBAR_SSFC_DATA | SPIBAR_SSFC_GO); /* Wait for error / complete status */ for (retry = SPI_RETRY; retry; retry--) { - u16 status = SPIBAR16(SPIBAR_SSFS); + u16 status = read16(spibar + SPIBAR_SSFS); if (status & SPIBAR_SSFS_ERROR) { printk(BIOS_ERR, "SPI rdsr failed\n"); return -1; @@ -143,7 +150,9 @@ int early_spi_read_wpsr(u8 *sr) udelay(SPI_DELAY); } - - *sr = SPIBAR32(SPIBAR_FDATA(0)) & 0xff; + /* Flash protected range 0 register bit 31 indicates WP + * Bit 31[WPE] 1= WP Enable 0= WP Disable + */ + *sr = (read32(spibar + SPIBAR_FPR(0)) & SPIBAR_FPR_WPE) >> 24; return 0; } diff --git a/src/soc/intel/skylake/romstage/stack.c b/src/soc/intel/skylake/romstage/stack.c deleted file mode 100644 index a81eb07..0000000 --- a/src/soc/intel/skylake/romstage/stack.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stddef.h> -#include <stdint.h> -#include <arch/cpu.h> -#include <arch/early_variables.h> -#include <console/console.h> -#include <cbmem.h> -#include <cpu/x86/mtrr.h> -#include <soc/romstage.h> - -static inline uint32_t *stack_push(u32 *stack, u32 value) -{ - stack = &stack[-1]; - *stack = value; - return stack; -} - -/* Romstage needs quite a bit of stack for decompressing images since the lzma - * lib keeps its state on the stack during romstage. */ -static unsigned long choose_top_of_stack(void) -{ - unsigned long stack_top; - const unsigned long romstage_ram_stack_size = 0x5000; - - /* cbmem_add() does a find() before add(). */ - stack_top = (unsigned long)cbmem_add(CBMEM_ID_ROMSTAGE_RAM_STACK, - romstage_ram_stack_size); - stack_top += romstage_ram_stack_size; - return stack_top; -} - -/* setup_stack_and_mttrs() determines the stack to use after - * cache-as-ram is torn down as well as the MTRR settings to use. */ -void *setup_stack_and_mttrs(void) -{ - unsigned long top_of_stack; - int num_mtrrs; - uint32_t *slot; - uint32_t mtrr_mask_upper; - uint32_t top_of_ram; - - /* Top of stack needs to be aligned to a 4-byte boundary. */ - top_of_stack = choose_top_of_stack() & ~3; - slot = (void *)top_of_stack; - num_mtrrs = 0; - - /* The upper bits of the MTRR mask need to set according to the number - * of physical address bits. */ - mtrr_mask_upper = (1 << ((cpuid_eax(0x80000008) & 0xff) - 32)) - 1; - - /* The order for each MTTR is value then base with upper 32-bits of - * each value coming before the lower 32-bits. The reasoning for - * this ordering is to create a stack layout like the following: - * +0: Number of MTRRs - * +4: MTTR base 0 31:0 - * +8: MTTR base 0 63:32 - * +12: MTTR mask 0 31:0 - * +16: MTTR mask 0 63:32 - * +20: MTTR base 1 31:0 - * +24: MTTR base 1 63:32 - * +28: MTTR mask 1 31:0 - * +32: MTTR mask 1 63:32 - */ - - /* Cache the ROM as WP just below 4GiB. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRRphysMaskValid); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRR_TYPE_WRPROT); - num_mtrrs++; - - /* Cache RAM as WB from 0 -> CONFIG_RAMTOP. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~(CONFIG_RAMTOP - 1) | MTRRphysMaskValid); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, 0 | MTRR_TYPE_WRBACK); - num_mtrrs++; - - top_of_ram = (uint32_t)cbmem_top(); - /* Cache 8MiB below the top of ram. The top of ram under 4GiB is the - * start of the TSEG region. It is required to be 8MiB aligned. Set - * this area as cacheable so it can be used later for ramstage before - * setting up the entire RAM as cacheable. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~((8 << 20) - 1) | MTRRphysMaskValid); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, (top_of_ram - (8 << 20)) | MTRR_TYPE_WRBACK); - num_mtrrs++; - - /* Cache 8MiB at the top of ram. Top of ram is where the TSEG - * region resides. However, it is not restricted to SMM mode until - * SMM has been relocated. By setting the region to cacheable it - * provides faster access when relocating the SMM handler as well - * as using the TSEG region for other purposes. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~((8 << 20) - 1) | MTRRphysMaskValid); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, top_of_ram | MTRR_TYPE_WRBACK); - num_mtrrs++; - - /* Save the number of MTTRs to setup. Return the stack location - * pointing to the number of MTRRs. */ - slot = stack_push(slot, num_mtrrs); - - return slot; -} diff --git a/src/soc/intel/skylake/romstage/systemagent.c b/src/soc/intel/skylake/romstage/systemagent.c index 7a43917..36f6871 100644 --- a/src/soc/intel/skylake/romstage/systemagent.c +++ b/src/soc/intel/skylake/romstage/systemagent.c @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2010 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <stdlib.h> diff --git a/src/soc/intel/skylake/romstage/uart.c b/src/soc/intel/skylake/romstage/uart.c index 96c9634..8ddcbad 100644 --- a/src/soc/intel/skylake/romstage/uart.c +++ b/src/soc/intel/skylake/romstage/uart.c @@ -1,7 +1,8 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,72 +15,61 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ -#include <arch/early_variables.h> #include <arch/io.h> -#include <delay.h> #include <device/pci_def.h> -#include <reg_script.h> #include <stdint.h> -#include <uart8250.h> -#include <soc/iobp.h> +#include <soc/pci_devs.h> +#include <soc/pcr.h> +#include <soc/romstage.h> #include <soc/serialio.h> -const struct reg_script uart_init[] = { - /* Set MMIO BAR */ - REG_PCI_WRITE32(PCI_BASE_ADDRESS_0, CONFIG_TTYS0_BASE), - /* Enable Memory access and Bus Master */ - REG_PCI_OR32(PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER), - /* Initialize LTR */ - REG_MMIO_RMW32(CONFIG_TTYS0_BASE + SIO_REG_PPR_GEN, - ~SIO_REG_PPR_GEN_LTR_MODE_MASK, 0), - REG_MMIO_RMW32(CONFIG_TTYS0_BASE + SIO_REG_PPR_RST, - ~(SIO_REG_PPR_RST_ASSERT), 0), - /* Take UART out of reset */ - REG_MMIO_OR32(CONFIG_TTYS0_BASE + SIO_REG_PPR_RST, - SIO_REG_PPR_RST_ASSERT), - /* Set M and N divisor inputs and enable clock */ - REG_MMIO_WRITE32(CONFIG_TTYS0_BASE + SIO_REG_PPR_CLOCK, - SIO_REG_PPR_CLOCK_EN | SIO_REG_PPR_CLOCK_UPDATE | - (SIO_REG_PPR_CLOCK_N_DIV << 16) | - (SIO_REG_PPR_CLOCK_M_DIV << 1)), - REG_SCRIPT_END -}; - void pch_uart_init(void) { - /* Program IOBP CB000154h[12,9:8,4:0] = 1001100011111b */ - u32 gpiodf = 0x131f; device_t dev; + u32 tmp, legacy; + u8 *base = (u8 *)CONFIG_TTYS0_BASE; - /* Put UART in byte access mode for 16550 compatibility */ switch (CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER) { case 0: dev = PCH_DEV_UART0; - gpiodf |= SIO_IOBP_GPIODF_UART0_BYTE_ACCESS; + legacy = SIO_PCH_LEGACY_UART0; break; case 1: dev = PCH_DEV_UART1; - gpiodf |= SIO_IOBP_GPIODF_UART1_BYTE_ACCESS; + legacy = SIO_PCH_LEGACY_UART1; + break; + case 2: + dev = PCH_DEV_UART2; + legacy = SIO_PCH_LEGACY_UART2; break; default: return; } - /* Program IOBP GPIODF */ - pch_iobp_update(SIO_IOBP_GPIODF, ~gpiodf, gpiodf); + /* Set configured UART base address */ + pci_write_config32(dev, PCI_BASE_ADDRESS_0, (u32)base); - /* Program IOBP CB000180h[5:0] = 111111b (undefined register) */ - pch_iobp_update(0xcb000180, ~0x0000003f, 0x0000003f); + /* Enable memory access and bus master */ + tmp = pci_read_config32(dev, PCI_COMMAND); + tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + pci_write_config32(dev, PCI_COMMAND, tmp); - /* Initialize chipset uart interface */ - reg_script_run_on_dev(dev, uart_init); + /* Take UART out of reset */ + tmp = read32(base + SIO_REG_PPR_RESETS); + tmp |= SIO_REG_PPR_RESETS_FUNC | SIO_REG_PPR_RESETS_APB | + SIO_REG_PPR_RESETS_IDMA; + write32(base + SIO_REG_PPR_RESETS, tmp); + + /* Set M and N divisor inputs and enable clock */ + tmp = read32(base + SIO_REG_PPR_CLOCK); + tmp |= SIO_REG_PPR_CLOCK_EN | SIO_REG_PPR_CLOCK_UPDATE | + (SIO_REG_PPR_CLOCK_N_DIV << 16) | + (SIO_REG_PPR_CLOCK_M_DIV << 1); + write32(base + SIO_REG_PPR_CLOCK, tmp); - /* - * Perform standard UART initialization - * Divisor 1 is 115200 BAUD - */ - uart8250_mem_init(CONFIG_TTYS0_BASE, 1); + /* Put UART in byte access mode for 16550 compatibility */ + pcr_andthenor32(PID_SERIALIO, R_PCH_PCR_SERIAL_IO_GPPRVRW7, 0, legacy); } diff --git a/src/soc/intel/skylake/sata.c b/src/soc/intel/skylake/sata.c deleted file mode 100644 index d3cf525..0000000 --- a/src/soc/intel/skylake/sata.c +++ /dev/null @@ -1,264 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <delay.h> -#include <soc/iobp.h> -#include <soc/ramstage.h> -#include <soc/rcba.h> -#include <soc/sata.h> -#include <soc/intel/broadwell/chip.h> - -static inline u32 sir_read(struct device *dev, int idx) -{ - pci_write_config32(dev, SATA_SIRI, idx); - return pci_read_config32(dev, SATA_SIRD); -} - -static inline void sir_write(struct device *dev, int idx, u32 value) -{ - pci_write_config32(dev, SATA_SIRI, idx); - pci_write_config32(dev, SATA_SIRD, value); -} - -static void sata_init(struct device *dev) -{ - config_t *config = dev->chip_info; - u32 reg32; - u8 *abar; - u16 reg16; - int port; - - printk(BIOS_DEBUG, "SATA: Initializing controller in AHCI mode.\n"); - - /* Enable BARs */ - pci_write_config16(dev, PCI_COMMAND, 0x0007); - - /* Set Interrupt Line */ - /* Interrupt Pin is set by D31IP.PIP */ - pci_write_config8(dev, PCI_INTERRUPT_LINE, 0x0a); - - /* Set timings */ - pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE); - pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE); - - /* for AHCI, Port Enable is managed in memory mapped space */ - reg16 = pci_read_config16(dev, 0x92); - reg16 &= ~0xf; - reg16 |= 0x8000 | config->sata_port_map; - pci_write_config16(dev, 0x92, reg16); - udelay(2); - - /* Setup register 98h */ - reg32 = pci_read_config32(dev, 0x98); - reg32 &= ~((1 << 31) | (1 << 30)); - reg32 |= 1 << 23; - reg32 |= 1 << 24; /* Enable MPHY Dynamic Power Gating */ - pci_write_config32(dev, 0x98, reg32); - - /* Setup register 9Ch */ - reg16 = 0; /* Disable alternate ID */ - reg16 = 1 << 5; /* BWG step 12 */ - pci_write_config16(dev, 0x9c, reg16); - - /* SATA Initialization register */ - reg32 = 0x183; - reg32 |= (config->sata_port_map ^ 0xf) << 24; - reg32 |= (config->sata_devslp_mux & 1) << 15; - pci_write_config32(dev, 0x94, reg32); - - /* Initialize AHCI memory-mapped space */ - abar = (u8 *)(pci_read_config32(dev, PCI_BASE_ADDRESS_5)); - printk(BIOS_DEBUG, "ABAR: %p\n", abar); - - /* CAP (HBA Capabilities) : enable power management */ - reg32 = read32(abar + 0x00); - reg32 |= 0x0c006000; /* set PSC+SSC+SALP+SSS */ - reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */ - reg32 |= (1 << 18); /* SAM: SATA AHCI MODE ONLY */ - write32(abar + 0x00, reg32); - - /* PI (Ports implemented) */ - write32(abar + 0x0c, config->sata_port_map); - (void) read32(abar + 0x0c); /* Read back 1 */ - (void) read32(abar + 0x0c); /* Read back 2 */ - - /* CAP2 (HBA Capabilities Extended)*/ - if (config->sata_devslp_disable) { - reg32 = read32(abar + 0x24); - reg32 &= ~(1 << 3); - write32(abar + 0x24, reg32); - } else { - /* Enable DEVSLP */ - reg32 = read32(abar + 0x24); - reg32 |= (1 << 5)|(1 << 4)|(1 << 3)|(1 << 2); - write32(abar + 0x24, reg32); - - for (port = 0; port < 4; port++) { - if (!(config->sata_port_map & (1 << port))) - continue; - reg32 = read32(abar + 0x144 + (0x80 * port)); - reg32 |= (1 << 1); /* DEVSLP DSP */ - write32(abar + 0x144 + (0x80 * port), reg32); - } - } - - /* - * Static Power Gating for unused ports - */ - reg32 = RCBA32(0x3a84); - /* Port 3 and 2 disabled */ - if ((config->sata_port_map & ((1 << 3)|(1 << 2))) == 0) - reg32 |= (1 << 24) | (1 << 26); - /* Port 1 and 0 disabled */ - if ((config->sata_port_map & ((1 << 1)|(1 << 0))) == 0) - reg32 |= (1 << 20) | (1 << 18); - RCBA32(0x3a84) = reg32; - - /* Set Gen3 Transmitter settings if needed */ - if (config->sata_port0_gen3_tx) - pch_iobp_update(SATA_IOBP_SP0_SECRT88, - ~(SATA_SECRT88_VADJ_MASK << - SATA_SECRT88_VADJ_SHIFT), - (config->sata_port0_gen3_tx & - SATA_SECRT88_VADJ_MASK) - << SATA_SECRT88_VADJ_SHIFT); - - if (config->sata_port1_gen3_tx) - pch_iobp_update(SATA_IOBP_SP1_SECRT88, - ~(SATA_SECRT88_VADJ_MASK << - SATA_SECRT88_VADJ_SHIFT), - (config->sata_port1_gen3_tx & - SATA_SECRT88_VADJ_MASK) - << SATA_SECRT88_VADJ_SHIFT); - - /* Set Gen3 DTLE DATA / EDGE registers if needed */ - if (config->sata_port0_gen3_dtle) { - pch_iobp_update(SATA_IOBP_SP0DTLE_DATA, - ~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT), - (config->sata_port0_gen3_dtle & SATA_DTLE_MASK) - << SATA_DTLE_DATA_SHIFT); - - pch_iobp_update(SATA_IOBP_SP0DTLE_EDGE, - ~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT), - (config->sata_port0_gen3_dtle & SATA_DTLE_MASK) - << SATA_DTLE_EDGE_SHIFT); - } - - if (config->sata_port1_gen3_dtle) { - pch_iobp_update(SATA_IOBP_SP1DTLE_DATA, - ~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT), - (config->sata_port1_gen3_dtle & SATA_DTLE_MASK) - << SATA_DTLE_DATA_SHIFT); - - pch_iobp_update(SATA_IOBP_SP1DTLE_EDGE, - ~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT), - (config->sata_port1_gen3_dtle & SATA_DTLE_MASK) - << SATA_DTLE_EDGE_SHIFT); - } - - /* - * Additional Programming Requirements for Power Optimizer - */ - - /* Step 1 */ - sir_write(dev, 0x64, 0x883c9003); - - /* Step 2: SIR 68h[15:0] = 880Ah */ - reg32 = sir_read(dev, 0x68); - reg32 &= 0xffff0000; - reg32 |= 0x880a; - sir_write(dev, 0x68, reg32); - - /* Step 3: SIR 60h[3] = 1 */ - reg32 = sir_read(dev, 0x60); - reg32 |= (1 << 3); - sir_write(dev, 0x60, reg32); - - /* Step 4: SIR 60h[0] = 1 */ - reg32 = sir_read(dev, 0x60); - reg32 |= (1 << 0); - sir_write(dev, 0x60, reg32); - - /* Step 5: SIR 60h[1] = 1 */ - reg32 = sir_read(dev, 0x60); - reg32 |= (1 << 1); - sir_write(dev, 0x60, reg32); - - /* Clock Gating */ - sir_write(dev, 0x70, 0x3f00bf1f); - sir_write(dev, 0x54, 0xcf000f0f); - sir_write(dev, 0x58, 0x00190000); - RCBA32_AND_OR(0x333c, 0xffcfffff, 0x00c00000); - - reg32 = pci_read_config32(dev, 0x300); - reg32 |= (1 << 17) | (1 << 16) | (1 << 19); - reg32 |= (1 << 31) | (1 << 30) | (1 << 29); - pci_write_config32(dev, 0x300, reg32); - - reg32 = pci_read_config32(dev, 0x98); - reg32 |= 1 << 29; - pci_write_config32(dev, 0x98, reg32); - - /* Register Lock */ - reg32 = pci_read_config32(dev, 0x9c); - reg32 |= (1 << 31); - pci_write_config32(dev, 0x9c, reg32); -} - -/* - * Set SATA controller mode early so the resource allocator can - * properly assign IO/Memory resources for the controller. - */ -static void sata_enable(device_t dev) -{ - /* Get the chip configuration */ - config_t *config = dev->chip_info; - u16 map = 0x0060; - - map |= (config->sata_port_map ^ 0xf) << 8; - - pci_write_config16(dev, 0x90, map); -} - -static struct device_operations sata_ops = { - .read_resources = &pci_dev_read_resources, - .set_resources = &pci_dev_set_resources, - .enable_resources = &pci_dev_enable_resources, - .init = &sata_init, - .enable = &sata_enable, - .ops_pci = &broadwell_pci_ops, -}; - -static const unsigned short pci_device_ids[] = { - 0x9c03, 0x9c05, 0x9c07, 0x9c0f, /* LynxPoint-LP */ - 0x9c83, 0x9c85, 0x282a, 0x9c87, 0x282a, 0x9c8f, /* WildcatPoint */ - 0 -}; - -static const struct pci_driver pch_sata __pci_driver = { - .ops = &sata_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; diff --git a/src/soc/intel/skylake/serialio.c b/src/soc/intel/skylake/serialio.c deleted file mode 100644 index 6eba7ac..0000000 --- a/src/soc/intel/skylake/serialio.c +++ /dev/null @@ -1,318 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <cbmem.h> -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pciexp.h> -#include <device/pci_ids.h> -#include <stdlib.h> -#include <soc/iobp.h> -#include <soc/nvs.h> -#include <soc/pci_devs.h> -#include <soc/pch.h> -#include <soc/ramstage.h> -#include <soc/rcba.h> -#include <soc/serialio.h> -#include <soc/intel/broadwell/chip.h> - -/* Set D3Hot Power State in ACPI mode */ -static void serialio_enable_d3hot(struct resource *res) -{ - u32 reg32 = read32(res2mmio(res, PCH_PCS, 0)); - reg32 |= PCH_PCS_PS_D3HOT; - write32(res2mmio(res, PCH_PCS, 0), reg32); -} - -static int serialio_uart_is_debug(struct device *dev) -{ -#if CONFIG_INTEL_PCH_UART_CONSOLE - switch (dev->path.pci.devfn) { - case PCH_DEVFN_UART0: /* UART0 */ - return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 0); - case PCH_DEVFN_UART1: /* UART1 */ - return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 1); - } -#endif - return 0; -} - -/* Enable clock in PCI mode */ -static void serialio_enable_clock(struct resource *bar0) -{ - u32 reg32 = read32(res2mmio(bar0, SIO_REG_PPR_CLOCK, 0)); - reg32 |= SIO_REG_PPR_CLOCK_EN; - write32(res2mmio(bar0, SIO_REG_PPR_CLOCK, 0), reg32); -} - -/* Put Serial IO D21:F0-F6 device into desired mode. */ -static void serialio_d21_mode(int sio_index, int int_pin, int acpi_mode) -{ - u32 portctrl = SIO_IOBP_PORTCTRL_PM_CAP_PRSNT; - - /* Snoop select 1. */ - portctrl |= SIO_IOBP_PORTCTRL_SNOOP_SELECT(1); - - /* Set interrupt pin. */ - portctrl |= SIO_IOBP_PORTCTRL_INT_PIN(int_pin); - - if (acpi_mode) { - /* Enable ACPI interrupt mode. */ - portctrl |= SIO_IOBP_PORTCTRL_ACPI_IRQ_EN; - - /* Disable PCI config space. */ - portctrl |= SIO_IOBP_PORTCTRL_PCI_CONF_DIS; - } - - pch_iobp_update(SIO_IOBP_PORTCTRLX(sio_index), 0, portctrl); -} - -/* Put Serial IO D23:F0 device into desired mode. */ -static void serialio_d23_mode(int acpi_mode) -{ - u32 portctrl = 0; - - /* Snoop select 1. */ - pch_iobp_update(SIO_IOBP_PORTCTRL1, 0, - SIO_IOBP_PORTCTRL1_SNOOP_SELECT(1)); - - if (acpi_mode) { - /* Enable ACPI interrupt mode. */ - portctrl |= SIO_IOBP_PORTCTRL0_ACPI_IRQ_EN; - - /* Disable PCI config space. */ - portctrl |= SIO_IOBP_PORTCTRL0_PCI_CONF_DIS; - } - - pch_iobp_update(SIO_IOBP_PORTCTRL0, 0, portctrl); -} - -/* Enable LTR Auto Mode for D21:F1-F6. */ -static void serialio_d21_ltr(struct resource *bar0) -{ - u32 reg; - - /* 1. Program BAR0 + 808h[2] = 0b */ - reg = read32(res2mmio(bar0, SIO_REG_PPR_GEN, 0)); - reg &= ~SIO_REG_PPR_GEN_LTR_MODE_MASK; - write32(res2mmio(bar0, SIO_REG_PPR_GEN, 0), reg); - - /* 2. Program BAR0 + 804h[1:0] = 00b */ - reg = read32(res2mmio(bar0, SIO_REG_PPR_RST, 0)); - reg &= ~SIO_REG_PPR_RST_ASSERT; - write32(res2mmio(bar0, SIO_REG_PPR_RST, 0), reg); - - /* 3. Program BAR0 + 804h[1:0] = 11b */ - reg = read32(res2mmio(bar0, SIO_REG_PPR_RST, 0)); - reg |= SIO_REG_PPR_RST_ASSERT; - write32(res2mmio(bar0, SIO_REG_PPR_RST, 0), reg); - - /* 4. Program BAR0 + 814h[31:0] = 00000000h */ - write32(res2mmio(bar0, SIO_REG_AUTO_LTR, 0), 0); -} - -/* Enable LTR Auto Mode for D23:F0. */ -static void serialio_d23_ltr(struct resource *bar0) -{ - u32 reg; - - /* Program BAR0 + 1008h[2] = 1b */ - reg = read32(res2mmio(bar0, SIO_REG_SDIO_PPR_GEN, 0)); - reg |= SIO_REG_PPR_GEN_LTR_MODE_MASK; - write32(res2mmio(bar0, SIO_REG_SDIO_PPR_GEN, 0), reg); - - /* Program BAR0 + 1010h = 0x00000000 */ - write32(res2mmio(bar0, SIO_REG_SDIO_PPR_SW_LTR, 0), 0); - - /* Program BAR0 + 3Ch[30] = 1b */ - reg = read32(res2mmio(bar0, SIO_REG_SDIO_PPR_CMD12, 0)); - reg |= SIO_REG_SDIO_PPR_CMD12_B30; - write32(res2mmio(bar0, SIO_REG_SDIO_PPR_CMD12, 0), reg); -} - -/* Select I2C voltage of 1.8V or 3.3V. */ -static void serialio_i2c_voltage_sel(struct resource *bar0, u8 voltage) -{ - u32 reg32 = read32(res2mmio(bar0, SIO_REG_PPR_GEN, 0)); - reg32 &= ~SIO_REG_PPR_GEN_VOLTAGE_MASK; - reg32 |= SIO_REG_PPR_GEN_VOLTAGE(voltage); - write32(res2mmio(bar0, SIO_REG_PPR_GEN, 0), reg32); -} - -/* Init sequence to be run once, done as part of D21:F0 (SDMA) init. */ -static void serialio_init_once(int acpi_mode) -{ - if (acpi_mode) { - /* Enable ACPI IRQ for IRQ13, IRQ7, IRQ6, IRQ5 in RCBA. */ - RCBA32_OR(ACPIIRQEN, (1 << 13)|(1 << 7)|(1 << 6)|(1 << 5)); - } - - /* Program IOBP CB000154h[12,9:8,4:0] = 1001100011111b. */ - pch_iobp_update(SIO_IOBP_GPIODF, ~0x0000131f, 0x0000131f); - - /* Program IOBP CB000180h[5:0] = 111111b (undefined register) */ - pch_iobp_update(0xcb000180, ~0x0000003f, 0x0000003f); -} - -static void serialio_init(struct device *dev) -{ - config_t *config = dev->chip_info; - struct resource *bar0, *bar1; - int sio_index = -1; - u32 reg32; - - printk(BIOS_DEBUG, "Initializing Serial IO device\n"); - - /* Ensure memory and bus master are enabled */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* Find BAR0 and BAR1 */ - bar0 = find_resource(dev, PCI_BASE_ADDRESS_0); - if (!bar0) - return; - bar1 = find_resource(dev, PCI_BASE_ADDRESS_1); - if (!bar1) - return; - - if (!config->sio_acpi_mode) - serialio_enable_clock(bar0); - - switch (dev->path.pci.devfn) { - case PCH_DEVFN_SDMA: /* SDMA */ - sio_index = SIO_ID_SDMA; - serialio_init_once(config->sio_acpi_mode); - serialio_d21_mode(sio_index, SIO_PIN_INTB, - config->sio_acpi_mode); - break; - case PCH_DEVFN_I2C0: /* I2C0 */ - sio_index = SIO_ID_I2C0; - serialio_d21_ltr(bar0); - serialio_i2c_voltage_sel(bar0, config->sio_i2c0_voltage); - serialio_d21_mode(sio_index, SIO_PIN_INTC, - config->sio_acpi_mode); - break; - case PCH_DEVFN_I2C1: /* I2C1 */ - sio_index = SIO_ID_I2C1; - serialio_d21_ltr(bar0); - serialio_i2c_voltage_sel(bar0, config->sio_i2c1_voltage); - serialio_d21_mode(sio_index, SIO_PIN_INTC, - config->sio_acpi_mode); - break; - case PCH_DEVFN_SPI0: /* SPI0 */ - sio_index = SIO_ID_SPI0; - serialio_d21_ltr(bar0); - serialio_d21_mode(sio_index, SIO_PIN_INTC, - config->sio_acpi_mode); - break; - case PCH_DEVFN_SPI1: /* SPI1 */ - sio_index = SIO_ID_SPI1; - serialio_d21_ltr(bar0); - serialio_d21_mode(sio_index, SIO_PIN_INTC, - config->sio_acpi_mode); - break; - case PCH_DEVFN_UART0: /* UART0 */ - sio_index = SIO_ID_UART0; - if (!serialio_uart_is_debug(dev)) - serialio_d21_ltr(bar0); - serialio_d21_mode(sio_index, SIO_PIN_INTD, - config->sio_acpi_mode); - break; - case PCH_DEVFN_UART1: /* UART1 */ - sio_index = SIO_ID_UART1; - if (!serialio_uart_is_debug(dev)) - serialio_d21_ltr(bar0); - serialio_d21_mode(sio_index, SIO_PIN_INTD, - config->sio_acpi_mode); - break; - case PCH_DEVFN_SDIO: /* SDIO */ - sio_index = SIO_ID_SDIO; - serialio_d23_ltr(bar0); - serialio_d23_mode(config->sio_acpi_mode); - break; - default: - return; - } - - if (config->sio_acpi_mode) { - global_nvs_t *gnvs; - - /* Find ACPI NVS to update BARs */ - gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS); - if (!gnvs) { - printk(BIOS_ERR, "Unable to locate Global NVS\n"); - return; - } - - /* Save BAR0 and BAR1 to ACPI NVS */ - gnvs->dev.bar0[sio_index] = (u32)bar0->base; - gnvs->dev.bar1[sio_index] = (u32)bar1->base; - - /* Do not enable UART if it is used as debug port */ - if (!serialio_uart_is_debug(dev)) - gnvs->dev.enable[sio_index] = 1; - - /* Put device in D3hot state via BAR1 */ - if (dev->path.pci.devfn != PCH_DEVFN_SDMA) - serialio_enable_d3hot(bar1); /* all but SDMA */ - } -} - -static void serialio_set_resources(struct device *dev) -{ - pci_dev_set_resources(dev); - -#if CONFIG_INTEL_PCH_UART_CONSOLE - /* Update UART base address if used for debug */ - if (serialio_uart_is_debug(dev)) { - struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) - uartmem_setbaseaddr(res->base); - } -#endif -} - -static struct device_operations device_ops = { - .read_resources = &pci_dev_read_resources, - .set_resources = &serialio_set_resources, - .enable_resources = &pci_dev_enable_resources, - .init = &serialio_init, - .ops_pci = &broadwell_pci_ops, -}; - -static const unsigned short pci_device_ids[] = { - 0x9c60, 0x9ce0, /* 0:15.0 - SDMA */ - 0x9c61, 0x9ce1, /* 0:15.1 - I2C0 */ - 0x9c62, 0x9ce2, /* 0:15.2 - I2C1 */ - 0x9c65, 0x9ce5, /* 0:15.3 - SPI0 */ - 0x9c66, 0x9ce6, /* 0:15.4 - SPI1 */ - 0x9c63, 0x9ce3, /* 0:15.5 - UART0 */ - 0x9c64, 0x9ce4, /* 0:15.6 - UART1 */ - 0x9c35, 0x9cb5, /* 0:17.0 - SDIO */ - 0 -}; - -static const struct pci_driver pch_pcie __pci_driver = { - .ops = &device_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; diff --git a/src/soc/intel/skylake/smbus.c b/src/soc/intel/skylake/smbus.c index 0ec84b2..872b16b 100644 --- a/src/soc/intel/skylake/smbus.c +++ b/src/soc/intel/skylake/smbus.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/io.h> @@ -94,15 +95,14 @@ static struct device_operations smbus_ops = { .read_resources = &smbus_read_resources, .set_resources = &pci_dev_set_resources, .enable_resources = &pci_dev_enable_resources, - .scan_bus = &scan_static_bus, + .scan_bus = &scan_smbus, .init = &pch_smbus_init, .ops_smbus_bus = &lops_smbus_bus, - .ops_pci = &broadwell_pci_ops, + .ops_pci = &soc_pci_ops, }; static const unsigned short pci_device_ids[] = { - 0x9c22, /* LynxPoint */ - 0x9ca2, /* WildcatPoint */ + 0x9d23, /* SunRisePoint LP */ 0 }; diff --git a/src/soc/intel/skylake/smbus_common.c b/src/soc/intel/skylake/smbus_common.c index 41416c7..fea9d80 100644 --- a/src/soc/intel/skylake/smbus_common.c +++ b/src/soc/intel/skylake/smbus_common.c @@ -4,6 +4,7 @@ * Copyright (C) 2005 Yinghai Lu <yinghailu(a)gmail.com> * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,7 +17,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <arch/io.h> @@ -65,9 +66,9 @@ int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address) unsigned char global_status_register; unsigned char byte; - if (smbus_wait_until_ready(smbus_base) < 0) { + if (smbus_wait_until_ready(smbus_base) < 0) return SMBUS_WAIT_UNTIL_READY_TIMEOUT; - } + /* Setup transaction */ /* Disable interrupts */ outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL); @@ -89,9 +90,8 @@ int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address) smbus_base + SMBHSTCTL); /* Poll for transaction completion */ - if (smbus_wait_until_done(smbus_base) < 0) { + if (smbus_wait_until_done(smbus_base) < 0) return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; - } global_status_register = inb(smbus_base + SMBHSTSTAT); @@ -100,9 +100,8 @@ int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address) /* Read results of transaction */ byte = inb(smbus_base + SMBHSTDAT0); - if (global_status_register != (1 << 1)) { + if (global_status_register != (1 << 1)) return SMBUS_ERROR; - } return byte; } diff --git a/src/soc/intel/skylake/smi.c b/src/soc/intel/skylake/smi.c index 85a508b..c474e02 100644 --- a/src/soc/intel/skylake/smi.c +++ b/src/soc/intel/skylake/smi.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <device/device.h> @@ -60,7 +61,8 @@ void southbridge_smm_enable_smi(void) enable_pm1(PWRBTN_EN | GBL_EN); disable_gpe(PME_B0_EN); - /* Enable SMI generation: + /* + * Enable SMI generation: * - on APMC writes (io 0xb2) * - on writes to SLP_EN (sleep states) * - on writes to GBL_RLS (bios commands) @@ -73,7 +75,7 @@ void southbridge_smm_enable_smi(void) void southbridge_trigger_smi(void) { - /** + /* * There are several methods of raising a controlled SMI# via * software, among them: * - Writes to io 0xb2 (APMC) diff --git a/src/soc/intel/skylake/smihandler.c b/src/soc/intel/skylake/smihandler.c index 63c9373..dac669a 100644 --- a/src/soc/intel/skylake/smihandler.c +++ b/src/soc/intel/skylake/smihandler.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,11 +16,12 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <delay.h> #include <types.h> +#include <arch/hlt.h> #include <arch/io.h> #include <console/console.h> #include <cpu/x86/cache.h> @@ -27,16 +29,16 @@ #include <cpu/x86/smm.h> #include <spi-generic.h> #include <elog.h> -#include <halt.h> #include <pc80/mc146818rtc.h> +#include <soc/iomap.h> #include <soc/lpc.h> #include <soc/nvs.h> #include <soc/pci_devs.h> +#include <soc/pch.h> +#include <soc/pcr.h> #include <soc/pm.h> -#include <soc/rcba.h> +#include <soc/pmc.h> #include <soc/smm.h> -#include <soc/xhci.h> -#include <drivers/intel/gma/i915_reg.h> static u8 smm_initialized = 0; @@ -55,9 +57,10 @@ int southbridge_io_trap_handler(int smif) switch (smif) { case 0x32: printk(BIOS_DEBUG, "OS Init\n"); - /* gnvs->smif: - * On success, the IO Trap Handler returns 0 - * On failure, the IO Trap Handler returns a value != 0 + /* + * gnvs->smif: + * - On success, the IO Trap Handler returns 0 + * - On failure, the IO Trap Handler returns a value != 0 */ gnvs->smif = 0; return 1; /* IO trap handled */ @@ -67,9 +70,7 @@ int southbridge_io_trap_handler(int smif) return 0; } -/** - * @brief Set the EOS bit - */ +/* Set the EOS bit */ void southbridge_smi_set_eos(void) { enable_smi(EOS); @@ -77,78 +78,39 @@ void southbridge_smi_set_eos(void) static void busmaster_disable_on_bus(int bus) { - int slot, func; - unsigned int val; - unsigned char hdr; - - for (slot = 0; slot < 0x20; slot++) { - for (func = 0; func < 8; func++) { - u32 reg32; - device_t dev = PCI_DEV(bus, slot, func); - - val = pci_read_config32(dev, PCI_VENDOR_ID); - - if (val == 0xffffffff || val == 0x00000000 || - val == 0x0000ffff || val == 0xffff0000) - continue; - - /* Disable Bus Mastering for this one device */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 &= ~PCI_COMMAND_MASTER; - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* If this is a bridge, then follow it. */ - hdr = pci_read_config8(dev, PCI_HEADER_TYPE); - hdr &= 0x7f; - if (hdr == PCI_HEADER_TYPE_BRIDGE || - hdr == PCI_HEADER_TYPE_CARDBUS) { - unsigned int buses; - buses = pci_read_config32(dev, PCI_PRIMARY_BUS); - busmaster_disable_on_bus((buses >> 8) & 0xff); - } - } - } + int slot, func; + unsigned int val; + unsigned char hdr; + + for (slot = 0; slot < 0x20; slot++) { + for (func = 0; func < 8; func++) { + u32 reg32; + device_t dev = PCI_DEV(bus, slot, func); + + val = pci_read_config32(dev, PCI_VENDOR_ID); + + if (val == 0xffffffff || val == 0x00000000 || + val == 0x0000ffff || val == 0xffff0000) + continue; + + /* Disable Bus Mastering for this one device */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 &= ~PCI_COMMAND_MASTER; + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* If this is a bridge, then follow it. */ + hdr = pci_read_config8(dev, PCI_HEADER_TYPE); + hdr &= 0x7f; + if (hdr == PCI_HEADER_TYPE_BRIDGE || + hdr == PCI_HEADER_TYPE_CARDBUS) { + unsigned int buses; + buses = pci_read_config32(dev, PCI_PRIMARY_BUS); + busmaster_disable_on_bus((buses >> 8) & 0xff); + } + } + } } -/* - * Turn off the backlight if it is on, and wait for the specified - * backlight off delay. This will allow panel power timings to meet - * spec and prevent brief garbage on the screen when turned off - * during firmware with power button triggered SMI. - */ -static void backlight_off(void) -{ - void *reg_base; - uint32_t pp_ctrl; - uint32_t bl_off_delay; - - reg_base = (void *)((uintptr_t)pci_read_config32(SA_DEV_IGD, PCI_BASE_ADDRESS_0) & ~0xf); - - /* Check if backlight is enabled */ - pp_ctrl = read32(reg_base + PCH_PP_CONTROL); - if (!(pp_ctrl & EDP_BLC_ENABLE)) - return; - - /* Enable writes to this register */ - pp_ctrl &= ~PANEL_UNLOCK_MASK; - pp_ctrl |= PANEL_UNLOCK_REGS; - - /* Turn off backlight */ - pp_ctrl &= ~EDP_BLC_ENABLE; - - write32(reg_base + PCH_PP_CONTROL, pp_ctrl); - read32(reg_base + PCH_PP_CONTROL); - - /* Read backlight off delay in 100us units */ - bl_off_delay = read32(reg_base + PCH_PP_OFF_DELAYS); - bl_off_delay &= PANEL_LIGHT_OFF_DELAY_MASK; - bl_off_delay *= 100; - - /* Wait for backlight to turn off */ - udelay(bl_off_delay); - - printk(BIOS_INFO, "Backlight turned off\n"); -} static void southbridge_smi_sleep(void) { @@ -176,10 +138,7 @@ static void southbridge_smi_sleep(void) /* Do any mainboard sleep handling */ mainboard_smi_sleep(slp_typ-2); - /* USB sleep preparations */ - usb_xhci_sleep_prepare(PCH_DEV_XHCI, slp_typ); - -#if CONFIG_ELOG_GSMI +#if IS_ENABLED(CONFIG_ELOG_GSMI) /* Log S3, S4, and S5 entry */ if (slp_typ >= 5) elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ-2); @@ -188,9 +147,7 @@ static void southbridge_smi_sleep(void) /* Clear pending GPE events */ clear_gpe_status(); - /* Next, do the deed. - */ - + /* Next, do the deed. */ switch (slp_typ) { case SLP_TYP_S0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); @@ -204,27 +161,23 @@ static void southbridge_smi_sleep(void) /* Invalidate the cache before going to S3 */ wbinvd(); break; - case SLP_TYP_S4: - printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); - break; case SLP_TYP_S5: printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); - - /* Turn off backlight if needed */ - backlight_off(); - + /*TODO: cmos_layout.bin need to verify; cause wrong CMOS setup*/ + s5pwr = MAINBOARD_POWER_ON; /* Disable all GPE */ disable_all_gpe(); - /* Always set the flag in case CMOS was changed on runtime. For + /* + * Always set the flag in case CMOS was changed on runtime. For * "KEEP", switch to "OFF" - KEEP is software emulated */ - reg8 = pci_read_config8(PCH_DEV_LPC, GEN_PMCON_3); + reg8 = pci_read_config8(PCH_DEV_PMC, GEN_PMCON_B); if (s5pwr == MAINBOARD_POWER_ON) reg8 &= ~1; else reg8 |= 1; - pci_write_config8(PCH_DEV_LPC, GEN_PMCON_3, reg8); + pci_write_config8(PCH_DEV_PMC, GEN_PMCON_B, reg8); /* also iterates over all bridges on bus 0 */ busmaster_disable_on_bus(0); @@ -243,7 +196,7 @@ static void southbridge_smi_sleep(void) /* Make sure to stop executing code here for S3/S4/S5 */ if (slp_typ > 1) - halt(); + hlt(); /* * In most sleep states, the code flow of this function ends at @@ -293,7 +246,7 @@ static em64t101_smm_state_save_area_t *smi_apmc_find_state_save(u8 cmd) return NULL; } -#if CONFIG_ELOG_GSMI +#if IS_ENABLED(CONFIG_ELOG_GSMI) static void southbridge_smi_gsmi(void) { u32 *ret, *param; @@ -305,11 +258,11 @@ static void southbridge_smi_gsmi(void) return; /* Command and return value in EAX */ - ret = (u32*)&io_smi->rax; + ret = (u32 *)&io_smi->rax; sub_command = (u8)(*ret >> 8); /* Parameter buffer in EBX */ - param = (u32*)&io_smi->rbx; + param = (u32 *)&io_smi->rbx; /* drivers/elog/gsmi.c */ *ret = gsmi_exec(sub_command, param); @@ -326,7 +279,7 @@ static void finalize(void) } finalize_done = 1; -#if CONFIG_SPI_FLASH_SMM +#if IS_ENABLED(CONFIG_SPI_FLASH_SMM) /* Re-init SPI driver to handle locked BAR */ spi_init(); #endif @@ -341,9 +294,6 @@ static void southbridge_smi_apmc(void) reg8 = inb(APM_CNT); switch (reg8) { - case APM_CNT_CST_CONTROL: - printk(BIOS_DEBUG, "C-state control\n"); - break; case APM_CNT_PST_CONTROL: printk(BIOS_DEBUG, "P-state control\n"); break; @@ -372,7 +322,7 @@ static void southbridge_smi_apmc(void) printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs); } break; -#if CONFIG_ELOG_GSMI +#if IS_ENABLED(CONFIG_ELOG_GSMI) case ELOG_GSMI_APM_CNT: southbridge_smi_gsmi(); break; @@ -386,12 +336,13 @@ static void southbridge_smi_pm1(void) { u16 pm1_sts = clear_pm1_status(); - /* While OSPM is not active, poweroff immediately - * on a power button event. + /* + * While OSPM is not active, poweroff immediately on a power button + * event. */ if (pm1_sts & PWRBTN_STS) { /* power button pressed */ -#if CONFIG_ELOG_GSMI +#if IS_ENABLED(CONFIG_ELOG_GSMI) elog_add_event(ELOG_TYPE_POWER_BUTTON); #endif disable_pm1_control(-1UL); @@ -431,8 +382,8 @@ static void southbridge_smi_tco(void) if (!tco_sts) return; - if (tco_sts & (1 << 8)) { // BIOSWR - u8 bios_cntl = pci_read_config16(PCH_DEV_LPC, BIOS_CNTL); + if (tco_sts & (1 << 8)) { /* BIOSWR */ + u8 bios_cntl = pci_read_config16(PCH_DEV_SPI, BIOS_CNTL); if (bios_cntl & 1) { /* @@ -446,7 +397,7 @@ static void southbridge_smi_tco(void) * box. */ printk(BIOS_DEBUG, "Switching back to RO\n"); - pci_write_config32(PCH_DEV_LPC, BIOS_CNTL, + pci_write_config32(PCH_DEV_SPI, BIOS_CNTL, (bios_cntl & ~1)); } /* No else for now? */ } else if (tco_sts & (1 << 3)) { /* TIMEOUT */ @@ -472,12 +423,14 @@ static void southbridge_smi_monitor(void) u32 trap_sts, trap_cycle; u32 data, mask = 0; int i; - - trap_sts = RCBA32(0x1e00); // TRSR - Trap Status Register - RCBA32(0x1e00) = trap_sts; // Clear trap(s) in TRSR - - trap_cycle = RCBA32(0x1e10); - for (i=16; i<20; i++) { + /* TRSR - Trap Status Register */ + pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPST, &trap_sts); + /* Clear trap(s) in TRSR */ + pcr_write8(PID_PSTH, R_PCH_PCR_PSTH_TRPST, trap_sts); + + /* TRPC - Trapped cycle */ + pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPC, &trap_cycle); + for (i = 16; i < 20; i++) { if (trap_cycle & (1 << i)) mask |= (0xff << ((i - 16) << 2)); } @@ -486,30 +439,30 @@ static void southbridge_smi_monitor(void) /* IOTRAP(3) SMI function call */ if (IOTRAP(3)) { if (gnvs && gnvs->smif) - io_trap_handler(gnvs->smif); // call function smif + io_trap_handler(gnvs->smif); /* call function smif */ return; } - /* IOTRAP(2) currently unused - * IOTRAP(1) currently unused */ + /* + * IOTRAP(2) currently unused + * IOTRAP(1) currently unused + */ /* IOTRAP(0) SMIC */ if (IOTRAP(0)) { - if (!(trap_cycle & (1 << 24))) { // It's a write + if (!(trap_cycle & (1 << 24))) { /* It's a write */ printk(BIOS_DEBUG, "SMI1 command\n"); - data = RCBA32(0x1e18); + /* Trapped write data */ + pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPD, &data); data &= mask; - // if (smi1) - // southbridge_smi_command(data); - // return; } - // Fall through to debug } printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) - if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + for (i = 0; i < 4; i++) + if (IOTRAP(i)) + printk(BIOS_DEBUG, " TRAP = %d\n", i); printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); printk(BIOS_DEBUG, " read/write: %s\n", @@ -517,7 +470,7 @@ static void southbridge_smi_monitor(void) if (!(trap_cycle & (1 << 24))) { /* Write Cycle */ - data = RCBA32(0x1e18); + pcr_read32(PID_PSTH, R_PCH_PCR_PSTH_TRPD, &data); printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data); } #undef IOTRAP @@ -526,52 +479,50 @@ static void southbridge_smi_monitor(void) typedef void (*smi_handler_t)(void); static smi_handler_t southbridge_smi[32] = { - NULL, // [0] reserved - NULL, // [1] reserved - NULL, // [2] BIOS_STS - NULL, // [3] LEGACY_USB_STS - southbridge_smi_sleep, // [4] SLP_SMI_STS - southbridge_smi_apmc, // [5] APM_STS - NULL, // [6] SWSMI_TMR_STS - NULL, // [7] reserved - southbridge_smi_pm1, // [8] PM1_STS - southbridge_smi_gpe0, // [9] GPE0_STS - southbridge_smi_gpi, // [10] GPI_STS - southbridge_smi_mc, // [11] MCSMI_STS - NULL, // [12] DEVMON_STS - southbridge_smi_tco, // [13] TCO_STS - southbridge_smi_periodic, // [14] PERIODIC_STS - NULL, // [15] SERIRQ_SMI_STS - NULL, // [16] SMBUS_SMI_STS - NULL, // [17] LEGACY_USB2_STS - NULL, // [18] INTEL_USB2_STS - NULL, // [19] reserved - NULL, // [20] PCI_EXP_SMI_STS - southbridge_smi_monitor, // [21] MONITOR_STS - NULL, // [22] reserved - NULL, // [23] reserved - NULL, // [24] reserved - NULL, // [25] EL_SMI_STS - NULL, // [26] SPI_STS - NULL, // [27] reserved - NULL, // [28] reserved - NULL, // [29] reserved - NULL, // [30] reserved - NULL // [31] reserved + NULL, /* [0] reserved */ + NULL, /* [1] reserved */ + NULL, /* [2] BIOS_STS */ + NULL, /* [3] LEGACY_USB_STS */ + southbridge_smi_sleep, /* [4] SLP_SMI_STS */ + southbridge_smi_apmc, /* [5] APM_STS */ + NULL, /* [6] SWSMI_TMR_STS */ + NULL, /* [7] reserved */ + southbridge_smi_pm1, /* [8] PM1_STS */ + southbridge_smi_gpe0, /* [9] GPE0_STS */ + southbridge_smi_gpi, /* [10] GPI_STS */ + southbridge_smi_mc, /* [11] MCSMI_STS */ + NULL, /* [12] DEVMON_STS */ + southbridge_smi_tco, /* [13] TCO_STS */ + southbridge_smi_periodic, /* [14] PERIODIC_STS */ + NULL, /* [15] SERIRQ_SMI_STS */ + NULL, /* [16] SMBUS_SMI_STS */ + NULL, /* [17] LEGACY_USB2_STS */ + NULL, /* [18] INTEL_USB2_STS */ + NULL, /* [19] reserved */ + NULL, /* [20] PCI_EXP_SMI_STS */ + southbridge_smi_monitor, /* [21] MONITOR_STS */ + NULL, /* [22] reserved */ + NULL, /* [23] reserved */ + NULL, /* [24] reserved */ + NULL, /* [25] EL_SMI_STS */ + NULL, /* [26] SPI_STS */ + NULL, /* [27] reserved */ + NULL, /* [28] reserved */ + NULL, /* [29] reserved */ + NULL, /* [30] reserved */ + NULL /* [31] reserved */ }; -/** - * @brief Interrupt handler for SMI# - * - * @param smm_revision revision of the smm state save map +/* + * Interrupt handler for SMI# */ - void southbridge_smi_handler(void) { int i; u32 smi_sts; - /* We need to clear the SMI status registers, or we won't see what's + /* + * We need to clear the SMI status registers, or we won't see what's * happening in the following calls. */ smi_sts = clear_smi_status(); @@ -583,8 +534,8 @@ void southbridge_smi_handler(void) southbridge_smi[i](); } else { printk(BIOS_DEBUG, - "SMI_STS[%d] occurred, but no " - "handler available.\n", i); + "SMI_STS[%d] occured, but no handler available.\n", + i); } } } diff --git a/src/soc/intel/skylake/smmrelocate.c b/src/soc/intel/skylake/smmrelocate.c index 47d6385..874d95f 100644 --- a/src/soc/intel/skylake/smmrelocate.c +++ b/src/soc/intel/skylake/smmrelocate.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <types.h> @@ -34,6 +35,7 @@ #include <soc/pci_devs.h> #include <soc/smm.h> #include <soc/systemagent.h> +#include "chip.h" /* This gets filled in and used during relocation. */ static struct smm_relocation_params smm_reloc_params; @@ -46,48 +48,44 @@ static inline void write_smrr(struct smm_relocation_params *relo_params) wrmsr(SMRRphysMask_MSR, relo_params->smrr_mask); } -static inline void write_emrr(struct smm_relocation_params *relo_params) -{ - printk(BIOS_DEBUG, "Writing EMRR. base = 0x%08x, mask=0x%08x\n", - relo_params->emrr_base.lo, relo_params->emrr_mask.lo); - wrmsr(EMRRphysBase_MSR, relo_params->emrr_base); - wrmsr(EMRRphysMask_MSR, relo_params->emrr_mask); -} - static inline void write_uncore_emrr(struct smm_relocation_params *relo_params) { printk(BIOS_DEBUG, "Writing UNCORE_EMRR. base = 0x%08x, mask=0x%08x\n", relo_params->uncore_emrr_base.lo, relo_params->uncore_emrr_mask.lo); - wrmsr(UNCORE_EMRRphysBase_MSR, relo_params->uncore_emrr_base); - wrmsr(UNCORE_EMRRphysMask_MSR, relo_params->uncore_emrr_mask); + wrmsr(UNCORE_EMRR_PHYS_BASE_MSR, relo_params->uncore_emrr_base); + wrmsr(UNCORE_EMRR_PHYS_MASK_MSR, relo_params->uncore_emrr_mask); } static void update_save_state(int cpu, - struct smm_relocation_params *relo_params, - const struct smm_runtime *runtime) + struct smm_relocation_params *relo_params, + const struct smm_runtime *runtime) { u32 smbase; u32 iedbase; - /* The relocated handler runs with all CPUs concurrently. Therefore + /* + * The relocated handler runs with all CPUs concurrently. Therefore * stagger the entry points adjusting SMBASE downwards by save state - * size * CPU num. */ + * size * CPU num. + */ smbase = relo_params->smram_base - cpu * runtime->save_state_size; iedbase = relo_params->ied_base; printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x\n", smbase, iedbase); - /* All threads need to set IEDBASE and SMBASE to the relocated + /* + * All threads need to set IEDBASE and SMBASE to the relocated * handler region. However, the save state location depends on the * smm_save_state_in_msrs field in the relocation parameters. If * smm_save_state_in_msrs is non-zero then the CPUs are relocating * the SMM handler in parallel, and each CPUs save state area is * located in their respective MSR space. If smm_save_state_in_msrs * is zero then the SMM relocation is happening serially so the - * save state is at the same default location for all CPUs. */ + * save state is at the same default location for all CPUs. + */ if (relo_params->smm_save_state_in_msrs) { msr_t smbase_msr; msr_t iedbase_msr; @@ -95,8 +93,10 @@ static void update_save_state(int cpu, smbase_msr.lo = smbase; smbase_msr.hi = 0; - /* According the BWG the IEDBASE MSR is in bits 63:32. It's - * not clear why it differs from the SMBASE MSR. */ + /* + * According the BWG the IEDBASE MSR is in bits 63:32. It's + * not clear why it differs from the SMBASE MSR. + */ iedbase_msr.lo = 0; iedbase_msr.hi = iedbase; @@ -131,9 +131,11 @@ static int bsp_setup_msr_save_state(struct smm_relocation_params *relo_params) return relo_params->smm_save_state_in_msrs; } -/* The relocation work is actually performed in SMM context, but the code +/* + * The relocation work is actually performed in SMM context, but the code * resides in the ramstage module. This occurs by trampolining from the default - * SMRAM entry point to here. */ + * SMRAM entry point to here. + */ static void asmlinkage cpu_smm_do_relocation(void *arg) { msr_t mtrr_cap; @@ -155,16 +157,20 @@ static void asmlinkage cpu_smm_do_relocation(void *arg) printk(BIOS_DEBUG, "In relocation handler: cpu %d\n", cpu); - /* Determine if the processor supports saving state in MSRs. If so, + /* + * Determine if the processor supports saving state in MSRs. If so, * enable it before the non-BSPs run so that SMM relocation can occur - * in parallel in the non-BSP CPUs. */ + * in parallel in the non-BSP CPUs. + */ if (cpu == 0) { - /* If smm_save_state_in_msrs is 1 then that means this is the + /* + * If smm_save_state_in_msrs is 1 then that means this is the * 2nd time through the relocation handler for the BSP. * Parallel SMM handler relocation is taking place. However, * it is desired to access other CPUs save state in the real * SMM handler. Therefore, disable the SMM save state in MSRs - * feature. */ + * feature. + */ if (relo_params->smm_save_state_in_msrs) { msr_t smm_feature_control; @@ -172,10 +178,12 @@ static void asmlinkage cpu_smm_do_relocation(void *arg) smm_feature_control.lo &= ~SMM_CPU_SAVE_EN; wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control); } else if (bsp_setup_msr_save_state(relo_params)) - /* Just return from relocation handler if MSR save + /* + * Just return from relocation handler if MSR save * state is enabled. In that case the BSP will come * back into the relocation handler to setup the new - * SMBASE as well disabling SMM save state in MSRs. */ + * SMBASE as well disabling SMM save state in MSRs. + */ return; } @@ -186,14 +194,6 @@ static void asmlinkage cpu_smm_do_relocation(void *arg) mtrr_cap = rdmsr(MTRRcap_MSR); if (mtrr_cap.lo & SMRR_SUPPORTED) write_smrr(relo_params); - - if (mtrr_cap.lo & EMRR_SUPPORTED) { - write_emrr(relo_params); - /* UNCORE_EMRR msrs are package level. Therefore, only - * configure these MSRs on the BSP. */ - if (cpu == 0) - write_uncore_emrr(relo_params); - } } static u32 northbridge_get_base_reg(device_t dev, int reg) @@ -207,7 +207,7 @@ static u32 northbridge_get_base_reg(device_t dev, int reg) } static void fill_in_relocation_params(device_t dev, - struct smm_relocation_params *params) + struct smm_relocation_params *params) { u32 tseg_size; u32 tsegmb; @@ -217,23 +217,26 @@ static void fill_in_relocation_params(device_t dev, int phys_bits; /* All range registers are aligned to 4KiB */ const u32 rmask = ~((1 << 12) - 1); + config_t *conf = dev->chip_info; - /* Some of the range registers are dependent on the number of physical - * address bits supported. */ + /* + * Some of the range registers are dependent on the number of physical + * address bits supported. + */ phys_bits = cpuid_eax(0x80000008) & 0xff; - /* The range bounded by the TSEGMB and BGSM registers encompasses the - * SMRAM range as well as the IED range. However, the SMRAM available - * to the handler is 4MiB since the IEDRAM lives TSEGMB + 4MiB. + /* + * The range bounded by the TSEGMB and BGSM registers encompasses the + * SMRAM range as well as the IED range. */ tsegmb = northbridge_get_base_reg(dev, TSEG); bgsm = northbridge_get_base_reg(dev, BGSM); tseg_size = bgsm - tsegmb; + params->ied_size = conf->IedSize; + params->smram_size = tseg_size - params->ied_size; params->smram_base = tsegmb; - params->smram_size = 4 << 20; params->ied_base = tsegmb + params->smram_size; - params->ied_size = tseg_size - params->smram_size; /* Adjust available SMM handler memory size. */ params->smram_size -= CONFIG_SMM_RESERVED_SIZE; @@ -248,8 +251,10 @@ static void fill_in_relocation_params(device_t dev, emrr_base = (params->ied_base + (2 << 20)) & rmask; emrr_size = params->ied_size - (2 << 20); - /* EMRR has 46 bits of valid address aligned to 4KiB. It's dependent - * on the number of physical address bits supported. */ + /* + * EMRR has 46 bits of valid address aligned to 4KiB. It's dependent + * on the number of physical address bits supported. + */ params->emrr_base.lo = emrr_base | MTRR_TYPE_WRBACK; params->emrr_base.hi = 0; params->emrr_mask.lo = (~(emrr_size - 1) & rmask) | MTRRphysMaskValid; @@ -259,7 +264,7 @@ static void fill_in_relocation_params(device_t dev, params->uncore_emrr_base.lo = emrr_base; params->uncore_emrr_base.hi = 0; params->uncore_emrr_mask.lo = (~(emrr_size - 1) & rmask) | - MTRRphysMaskValid; + MTRRphysMaskValid; params->uncore_emrr_mask.hi = (1 << (39 - 32)) - 1; } @@ -280,14 +285,16 @@ static void adjust_apic_id_map(struct smm_loader_params *smm_params) } static int install_relocation_handler(int num_cpus, - struct smm_relocation_params *relo_params) + struct smm_relocation_params *relo_params) { - /* The default SMM entry can happen in parallel or serially. If the + /* + * The default SMM entry can happen in parallel or serially. If the * default SMM entry is done in parallel the BSP has already setup * the saving state to each CPU's MSRs. At least one save state size * is required for the initial SMM entry for the BSP to determine if * parallel SMM relocation is even feasible. Set the stack size to - * the save state size, and call into the do_relocation handler. */ + * the save state size, and call into the do_relocation handler. + */ int save_state_size = sizeof(em64t101_smm_state_save_area_t); struct smm_loader_params smm_params = { .per_cpu_stack_size = save_state_size, @@ -318,6 +325,9 @@ static void setup_ied_area(struct smm_relocation_params *params) ied_base = (void *)params->ied_base; + printk(BIOS_DEBUG, "IED base = 0x%08x\n", params->ied_base); + printk(BIOS_DEBUG, "IED size = 0x%08x\n", params->ied_size); + /* Place IED header at IEDBASE. */ memcpy(ied_base, &ied, sizeof(ied)); @@ -326,10 +336,12 @@ static void setup_ied_area(struct smm_relocation_params *params) } static int install_permanent_handler(int num_cpus, - struct smm_relocation_params *relo_params) + struct smm_relocation_params *relo_params) { - /* There are num_cpus concurrent stacks and num_cpus concurrent save - * state areas. Lastly, set the stack size to the save state size. */ + /* + * There are num_cpus concurrent stacks and num_cpus concurrent save + * state areas. Lastly, set the stack size to the save state size. + */ int save_state_size = sizeof(em64t101_smm_state_save_area_t); struct smm_loader_params smm_params = { .per_cpu_stack_size = save_state_size, @@ -341,7 +353,7 @@ static int install_permanent_handler(int num_cpus, printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n", relo_params->smram_base); if (smm_load_module((void *)relo_params->smram_base, - relo_params->smram_size, &smm_params)) + relo_params->smram_size, &smm_params)) return -1; adjust_apic_id_map(&smm_params); @@ -359,14 +371,15 @@ static int cpu_smm_setup(void) fill_in_relocation_params(dev, &smm_reloc_params); - setup_ied_area(&smm_reloc_params); + if (smm_reloc_params.ied_size) + setup_ied_area(&smm_reloc_params); msr = rdmsr(CORE_THREAD_COUNT_MSR); num_cpus = msr.lo & 0xffff; if (num_cpus > CONFIG_MAX_CPUS) { printk(BIOS_CRIT, - "Error: Hardware CPUs (%d) > MAX_CPUS (%d)\n", - num_cpus, CONFIG_MAX_CPUS); + "Error: Hardware CPUs (%d) > MAX_CPUS (%d)\n", + num_cpus, CONFIG_MAX_CPUS); } if (install_relocation_handler(num_cpus, &smm_reloc_params)) { @@ -380,7 +393,6 @@ static int cpu_smm_setup(void) } /* Ensure the SMM handlers hit DRAM before performing first SMI. */ - /* TODO(adurbin): Is this really needed? */ wbinvd(); return 0; @@ -398,9 +410,8 @@ int smm_initialize(void) /* Run the relocation handler. */ smm_initiate_relocation(); - if (smm_reloc_params.smm_save_state_in_msrs) { + if (smm_reloc_params.smm_save_state_in_msrs) printk(BIOS_DEBUG, "Doing parallel SMM relocation.\n"); - } return 0; } @@ -421,16 +432,19 @@ void smm_relocate(void) void smm_init(void) { - /* smm_init() is normally called from initialize_cpus() in + /* + * smm_init() is normally called from initialize_cpus() in * lapic_cpu_init.c. However, that path is no longer used. Don't reuse * the function name because that would cause confusion. * The smm_initialize() function above is used to setup SMM at the - * appropriate time. */ + * appropriate time. + */ } void smm_lock(void) { - /* LOCK the SMM memory window and enable normal SMM. + /* + * LOCK the SMM memory window and enable normal SMM. * After running this function, only a full reset can * make the SMM registers writable again. */ diff --git a/src/soc/intel/skylake/spi.c b/src/soc/intel/skylake/spi.c deleted file mode 100644 index 36558a1..0000000 --- a/src/soc/intel/skylake/spi.c +++ /dev/null @@ -1,680 +0,0 @@ -/* - * Copyright (C) 2014 Google Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file is derived from the flashrom project. */ -#include <stdint.h> -#include <stdlib.h> -#include <string.h> -#include <bootstate.h> -#include <delay.h> -#include <arch/io.h> -#include <console/console.h> -#include <device/pci_ids.h> -#include <spi-generic.h> -#include <soc/pci_devs.h> -#include <soc/rcba.h> -#include <soc/spi.h> - -#ifdef __SMM__ -#define pci_read_config_byte(dev, reg, targ)\ - *(targ) = pci_read_config8(dev, reg) -#define pci_read_config_word(dev, reg, targ)\ - *(targ) = pci_read_config16(dev, reg) -#define pci_read_config_dword(dev, reg, targ)\ - *(targ) = pci_read_config32(dev, reg) -#define pci_write_config_byte(dev, reg, val)\ - pci_write_config8(dev, reg, val) -#define pci_write_config_word(dev, reg, val)\ - pci_write_config16(dev, reg, val) -#define pci_write_config_dword(dev, reg, val)\ - pci_write_config32(dev, reg, val) -#else /* !__SMM__ */ -#include <device/device.h> -#include <device/pci.h> -#define pci_read_config_byte(dev, reg, targ)\ - *(targ) = pci_read_config8(dev, reg) -#define pci_read_config_word(dev, reg, targ)\ - *(targ) = pci_read_config16(dev, reg) -#define pci_read_config_dword(dev, reg, targ)\ - *(targ) = pci_read_config32(dev, reg) -#define pci_write_config_byte(dev, reg, val)\ - pci_write_config8(dev, reg, val) -#define pci_write_config_word(dev, reg, val)\ - pci_write_config16(dev, reg, val) -#define pci_write_config_dword(dev, reg, val)\ - pci_write_config32(dev, reg, val) -#endif /* !__SMM__ */ - -typedef struct spi_slave ich_spi_slave; - -static int ichspi_lock = 0; - -typedef struct ich9_spi_regs { - uint32_t bfpr; - uint16_t hsfs; - uint16_t hsfc; - uint32_t faddr; - uint32_t _reserved0; - uint32_t fdata[16]; - uint32_t frap; - uint32_t freg[5]; - uint32_t _reserved1[3]; - uint32_t pr[5]; - uint32_t _reserved2[2]; - uint8_t ssfs; - uint8_t ssfc[3]; - uint16_t preop; - uint16_t optype; - uint8_t opmenu[8]; - uint32_t bbar; - uint8_t _reserved3[12]; - uint32_t fdoc; - uint32_t fdod; - uint8_t _reserved4[8]; - uint32_t afc; - uint32_t lvscc; - uint32_t uvscc; - uint8_t _reserved5[4]; - uint32_t fpb; - uint8_t _reserved6[28]; - uint32_t srdl; - uint32_t srdc; - uint32_t srd; -} __attribute__((packed)) ich9_spi_regs; - -typedef struct ich_spi_controller { - int locked; - - uint8_t *opmenu; - int menubytes; - uint16_t *preop; - uint16_t *optype; - uint32_t *addr; - uint8_t *data; - unsigned databytes; - uint8_t *status; - uint16_t *control; - uint32_t *bbar; -} ich_spi_controller; - -static ich_spi_controller cntlr; - -enum { - SPIS_SCIP = 0x0001, - SPIS_GRANT = 0x0002, - SPIS_CDS = 0x0004, - SPIS_FCERR = 0x0008, - SSFS_AEL = 0x0010, - SPIS_LOCK = 0x8000, - SPIS_RESERVED_MASK = 0x7ff0, - SSFS_RESERVED_MASK = 0x7fe2 -}; - -enum { - SPIC_SCGO = 0x000002, - SPIC_ACS = 0x000004, - SPIC_SPOP = 0x000008, - SPIC_DBC = 0x003f00, - SPIC_DS = 0x004000, - SPIC_SME = 0x008000, - SSFC_SCF_MASK = 0x070000, - SSFC_RESERVED = 0xf80000 -}; - -enum { - HSFS_FDONE = 0x0001, - HSFS_FCERR = 0x0002, - HSFS_AEL = 0x0004, - HSFS_BERASE_MASK = 0x0018, - HSFS_BERASE_SHIFT = 3, - HSFS_SCIP = 0x0020, - HSFS_FDOPSS = 0x2000, - HSFS_FDV = 0x4000, - HSFS_FLOCKDN = 0x8000 -}; - -enum { - HSFC_FGO = 0x0001, - HSFC_FCYCLE_MASK = 0x0006, - HSFC_FCYCLE_SHIFT = 1, - HSFC_FDBC_MASK = 0x3f00, - HSFC_FDBC_SHIFT = 8, - HSFC_FSMIE = 0x8000 -}; - -enum { - SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0, - SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1, - SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2, - SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3 -}; - -#if CONFIG_DEBUG_SPI_FLASH - -static u8 readb_(const void *addr) -{ - u8 v = read8(addr); - printk(BIOS_DEBUG, "read %2.2x from %4.4x\n", - v, ((unsigned) addr & 0xffff) - 0xf020); - return v; -} - -static u16 readw_(const void *addr) -{ - u16 v = read16(addr); - printk(BIOS_DEBUG, "read %4.4x from %4.4x\n", - v, ((unsigned) addr & 0xffff) - 0xf020); - return v; -} - -static u32 readl_(const void *addr) -{ - u32 v = read32(addr); - printk(BIOS_DEBUG, "read %8.8x from %4.4x\n", - v, ((unsigned) addr & 0xffff) - 0xf020); - return v; -} - -static void writeb_(u8 b, const void *addr) -{ - write8(addr, b); - printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n", - b, ((unsigned) addr & 0xffff) - 0xf020); -} - -static void writew_(u16 b, const void *addr) -{ - write16(addr, b); - printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n", - b, ((unsigned) addr & 0xffff) - 0xf020); -} - -static void writel_(u32 b, const void *addr) -{ - write32(addr, b); - printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n", - b, ((unsigned) addr & 0xffff) - 0xf020); -} - -#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */ - -#define readb_(a) read8(a) -#define readw_(a) read16(a) -#define readl_(a) read32(a) -#define writeb_(val, addr) write8(addr, val) -#define writew_(val, addr) write16(addr, val) -#define writel_(val, addr) write32(addr, val) - -#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */ - -static void write_reg(const void *value, void *dest, uint32_t size) -{ - const uint8_t *bvalue = value; - uint8_t *bdest = dest; - - while (size >= 4) { - writel_(*(const uint32_t *)bvalue, bdest); - bdest += 4; bvalue += 4; size -= 4; - } - while (size) { - writeb_(*bvalue, bdest); - bdest++; bvalue++; size--; - } -} - -static void read_reg(const void *src, void *value, uint32_t size) -{ - const uint8_t *bsrc = src; - uint8_t *bvalue = value; - - while (size >= 4) { - *(uint32_t *)bvalue = readl_(bsrc); - bsrc += 4; bvalue += 4; size -= 4; - } - while (size) { - *bvalue = readb_(bsrc); - bsrc++; bvalue++; size--; - } -} - -static void ich_set_bbar(uint32_t minaddr) -{ - const uint32_t bbar_mask = 0x00ffff00; - uint32_t ichspi_bbar; - - minaddr &= bbar_mask; - ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask; - ichspi_bbar |= minaddr; - writel_(ichspi_bbar, cntlr.bbar); -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs) -{ - ich_spi_slave *slave = malloc(sizeof(*slave)); - - if (!slave) { - printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n"); - return NULL; - } - - memset(slave, 0, sizeof(*slave)); - - slave->bus = bus; - slave->cs = cs; - return slave; -} - -void spi_init(void) -{ - uint8_t *rcrb; /* Root Complex Register Block */ - uint32_t rcba; /* Root Complex Base Address */ - uint8_t bios_cntl; - device_t dev = PCH_DEV_LPC; - ich9_spi_regs *ich9_spi; - - pci_read_config_dword(dev, 0xf0, &rcba); - /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */ - rcrb = (uint8_t *)(rcba & 0xffffc000); - ich9_spi = (ich9_spi_regs *)(rcrb + 0x3800); - ichspi_lock = readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN; - cntlr.opmenu = ich9_spi->opmenu; - cntlr.menubytes = sizeof(ich9_spi->opmenu); - cntlr.optype = &ich9_spi->optype; - cntlr.addr = &ich9_spi->faddr; - cntlr.data = (uint8_t *)ich9_spi->fdata; - cntlr.databytes = sizeof(ich9_spi->fdata); - cntlr.status = &ich9_spi->ssfs; - cntlr.control = (uint16_t *)ich9_spi->ssfc; - cntlr.bbar = &ich9_spi->bbar; - cntlr.preop = &ich9_spi->preop; - ich_set_bbar(0); - - /* Disable the BIOS write protect so write commands are allowed. */ - pci_read_config_byte(dev, 0xdc, &bios_cntl); - bios_cntl &= ~(1 << 5); - pci_write_config_byte(dev, 0xdc, bios_cntl | 0x1); -} - -#if ENV_RAMSTAGE -static void spi_init_cb(void *unused) -{ - spi_init(); -} - -BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, spi_init_cb, NULL); -#endif - -int spi_claim_bus(struct spi_slave *slave) -{ - /* Handled by ICH automatically. */ - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - /* Handled by ICH automatically. */ -} - -typedef struct spi_transaction { - const uint8_t *out; - uint32_t bytesout; - uint8_t *in; - uint32_t bytesin; - uint8_t type; - uint8_t opcode; - uint32_t offset; -} spi_transaction; - -static inline void spi_use_out(spi_transaction *trans, unsigned bytes) -{ - trans->out += bytes; - trans->bytesout -= bytes; -} - -static inline void spi_use_in(spi_transaction *trans, unsigned bytes) -{ - trans->in += bytes; - trans->bytesin -= bytes; -} - -static void spi_setup_type(spi_transaction *trans) -{ - trans->type = 0xFF; - - /* Try to guess spi type from read/write sizes. */ - if (trans->bytesin == 0) { - if (trans->bytesout > 4) - /* - * If bytesin = 0 and bytesout > 4, we presume this is - * a write data operation, which is accompanied by an - * address. - */ - trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS; - else - trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; - return; - } - - if (trans->bytesout == 1) { /* and bytesin is > 0 */ - trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; - return; - } - - if (trans->bytesout == 4) { /* and bytesin is > 0 */ - trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; - } - - /* Fast read command is called with 5 bytes instead of 4 */ - if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) { - trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; - --trans->bytesout; - } -} - -static int spi_setup_opcode(spi_transaction *trans) -{ - uint16_t optypes; - uint8_t opmenu[cntlr.menubytes]; - - trans->opcode = trans->out[0]; - spi_use_out(trans, 1); - if (!ichspi_lock) { - /* The lock is off, so just use index 0. */ - writeb_(trans->opcode, cntlr.opmenu); - optypes = readw_(cntlr.optype); - optypes = (optypes & 0xfffc) | (trans->type & 0x3); - writew_(optypes, cntlr.optype); - return 0; - } else { - /* The lock is on. See if what we need is on the menu. */ - uint8_t optype; - uint16_t opcode_index; - - /* Write Enable is handled as atomic prefix */ - if (trans->opcode == SPI_OPCODE_WREN) - return 0; - - read_reg(cntlr.opmenu, opmenu, sizeof(opmenu)); - for (opcode_index = 0; opcode_index < cntlr.menubytes; - opcode_index++) { - if (opmenu[opcode_index] == trans->opcode) - break; - } - - if (opcode_index == cntlr.menubytes) { - printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n", - trans->opcode); - return -1; - } - - optypes = readw_(cntlr.optype); - optype = (optypes >> (opcode_index * 2)) & 0x3; - if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && - optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && - trans->bytesout >= 3) { - /* We guessed wrong earlier. Fix it up. */ - trans->type = optype; - } - if (optype != trans->type) { - printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n", - optype); - return -1; - } - return opcode_index; - } -} - -static int spi_setup_offset(spi_transaction *trans) -{ - /* Separate the SPI address and data. */ - switch (trans->type) { - case SPI_OPCODE_TYPE_READ_NO_ADDRESS: - case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS: - return 0; - case SPI_OPCODE_TYPE_READ_WITH_ADDRESS: - case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS: - trans->offset = ((uint32_t)trans->out[0] << 16) | - ((uint32_t)trans->out[1] << 8) | - ((uint32_t)trans->out[2] << 0); - spi_use_out(trans, 3); - return 1; - default: - printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type); - return -1; - } -} - -/* - * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set - * below is True) or 0. In case the wait was for the bit(s) to set - write - * those bits back, which would cause resetting them. - * - * Return the last read status value on success or -1 on failure. - */ -static int ich_status_poll(u16 bitmask, int wait_til_set) -{ - int timeout = 6000; /* This will result in 60 ms */ - u16 status = 0; - - while (timeout--) { - status = readw_(cntlr.status); - if (wait_til_set ^ ((status & bitmask) == 0)) { - if (wait_til_set) - writew_((status & bitmask), cntlr.status); - return status; - } - udelay(10); - } - - printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n", - status, bitmask); - return -1; -} - -unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len) -{ - return min(cntlr.databytes, buf_len); -} - -int spi_xfer(struct spi_slave *slave, const void *dout, - unsigned int bytesout, void *din, unsigned int bytesin) -{ - uint16_t control; - int16_t opcode_index; - int with_address; - int status; - - spi_transaction trans = { - dout, bytesout, - din, bytesin, - 0xff, 0xff, 0 - }; - - /* There has to always at least be an opcode. */ - if (!bytesout || !dout) { - printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n"); - return -1; - } - /* Make sure if we read something we have a place to put it. */ - if (bytesin != 0 && !din) { - printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n"); - return -1; - } - - if (ich_status_poll(SPIS_SCIP, 0) == -1) - return -1; - - writew_(SPIS_CDS | SPIS_FCERR, cntlr.status); - - spi_setup_type(&trans); - if ((opcode_index = spi_setup_opcode(&trans)) < 0) - return -1; - if ((with_address = spi_setup_offset(&trans)) < 0) - return -1; - - if (trans.opcode == SPI_OPCODE_WREN) { - /* - * Treat Write Enable as Atomic Pre-Op if possible - * in order to prevent the Management Engine from - * issuing a transaction between WREN and DATA. - */ - if (!ichspi_lock) - writew_(trans.opcode, cntlr.preop); - return 0; - } - - /* Preset control fields */ - control = SPIC_SCGO | ((opcode_index & 0x07) << 4); - - /* Issue atomic preop cycle if needed */ - if (readw_(cntlr.preop)) - control |= SPIC_ACS; - - if (!trans.bytesout && !trans.bytesin) { - /* SPI addresses are 24 bit only */ - if (with_address) - writel_(trans.offset & 0x00FFFFFF, cntlr.addr); - - /* - * This is a 'no data' command (like Write Enable), its - * bytesout size was 1, decremented to zero while executing - * spi_setup_opcode() above. Tell the chip to send the - * command. - */ - writew_(control, cntlr.control); - - /* wait for the result */ - status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); - if (status == -1) - return -1; - - if (status & SPIS_FCERR) { - printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n"); - return -1; - } - - return 0; - } - - /* - * Check if this is a write command attempting to transfer more bytes - * than the controller can handle. Iterations for writes are not - * supported here because each SPI write command needs to be preceded - * and followed by other SPI commands, and this sequence is controlled - * by the SPI chip driver. - */ - if (trans.bytesout > cntlr.databytes) { - printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use" - " CONTROLLER_PAGE_LIMIT?\n"); - return -1; - } - - /* - * Read or write up to databytes bytes at a time until everything has - * been sent. - */ - while (trans.bytesout || trans.bytesin) { - uint32_t data_length; - - /* SPI addresses are 24 bit only */ - /* http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/pent… */ - writel_(trans.offset & 0x00FFFFFF, cntlr.addr); - - if (trans.bytesout) - data_length = min(trans.bytesout, cntlr.databytes); - else - data_length = min(trans.bytesin, cntlr.databytes); - - /* Program data into FDATA0 to N */ - if (trans.bytesout) { - write_reg(trans.out, cntlr.data, data_length); - spi_use_out(&trans, data_length); - if (with_address) - trans.offset += data_length; - } - - /* Add proper control fields' values */ - control &= ~((cntlr.databytes - 1) << 8); - control |= SPIC_DS; - control |= (data_length - 1) << 8; - - /* write it */ - writew_(control, cntlr.control); - - /* Wait for Cycle Done Status or Flash Cycle Error. */ - status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); - if (status == -1) - return -1; - - if (status & SPIS_FCERR) { - printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n"); - return -1; - } - - if (trans.bytesin) { - read_reg(cntlr.data, trans.in, data_length); - spi_use_in(&trans, data_length); - if (with_address) - trans.offset += data_length; - } - } - - /* Clear atomic preop now that xfer is done */ - writew_(0, cntlr.preop); - - return 0; -} - -/* Use first empty Protected Range Register to cover region of flash */ -int spi_flash_protect(u32 start, u32 size) -{ - u32 end = start + size - 1; - u32 reg; - int prr; - - /* Find first empty PRR */ - for (prr = 0; prr < SPI_PRR_MAX; prr++) { - reg = SPIBAR32(SPI_PRR(prr)); - if (reg == 0) - break; - } - if (prr >= SPI_PRR_MAX) { - printk(BIOS_ERR, "ERROR: No SPI PRR free!\n"); - return -1; - } - - /* Set protected range base and limit */ - reg = ((end >> SPI_PRR_SHIFT) & SPI_PRR_MASK); - reg <<= SPI_PRR_LIMIT_SHIFT; - reg |= ((start >> SPI_PRR_SHIFT) & SPI_PRR_MASK); - reg |= SPI_PRR_WPE; - - /* Set the PRR register and verify it is protected */ - SPIBAR32(SPI_PRR(prr)) = reg; - reg = SPIBAR32(SPI_PRR(prr)); - if (!(reg & SPI_PRR_WPE)) { - printk(BIOS_ERR, "ERROR: Unable to set SPI PRR %d\n", prr); - return -1; - } - - printk(BIOS_INFO, "%s: PRR %d is enabled for range 0x%08x-0x%08x\n", - __func__, prr, start, end); - return 0; -} diff --git a/src/soc/intel/skylake/stage_cache.c b/src/soc/intel/skylake/stage_cache.c deleted file mode 100644 index 346e673..0000000 --- a/src/soc/intel/skylake/stage_cache.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <cbmem.h> -#include <soc/smm.h> -#include <stage_cache.h> -#include <stdint.h> - -void stage_cache_external_region(void **base, size_t *size) -{ - /* The ramstage cache lives in the TSEG region. - * The top of ram is defined to be the TSEG base address. */ - u32 offset = smm_region_size(); - offset -= CONFIG_IED_REGION_SIZE; - offset -= CONFIG_SMM_RESERVED_SIZE; - - *base = (void *)(cbmem_top() + offset); - *size = CONFIG_SMM_RESERVED_SIZE; -} diff --git a/src/soc/intel/skylake/systemagent.c b/src/soc/intel/skylake/systemagent.c index d58cf21..2034e8e 100644 --- a/src/soc/intel/skylake/systemagent.c +++ b/src/soc/intel/skylake/systemagent.c @@ -3,6 +3,7 @@ * * Copyright (C) 2007-2009 coresystems GmbH * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +16,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <console/console.h> @@ -29,6 +30,7 @@ #include <stdlib.h> #include <string.h> #include <cbmem.h> +#include <romstage_handoff.h> #include <vendorcode/google/chromeos/chromeos.h> #include <soc/cpu.h> #include <soc/iomap.h> @@ -54,17 +56,17 @@ static int get_pcie_bar(device_t dev, unsigned int index, u32 *base, u32 *len) return 0; switch ((pciexbar_reg >> 1) & 3) { - case 0: // 256MB + case 0: /* 256MB */ *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)| (1 << 28)); *len = 256 * 1024 * 1024; return 1; - case 1: // 128M + case 1: /* 128M */ *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)| (1 << 28)|(1 << 27)); *len = 128 * 1024 * 1024; return 1; - case 2: // 64M + case 2: /* 64M */ *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)| (1 << 28)|(1 << 27)|(1 << 26)); *len = 64 * 1024 * 1024; @@ -90,11 +92,13 @@ static int get_bar(device_t dev, unsigned int index, u32 *base, u32 *len) return 1; } -/* There are special BARs that actually are programmed in the MCHBAR. These +/* + * There are special BARs that actually are programmed in the MCHBAR. These * Intel special features, but they do consume resources that need to be - * accounted for. */ + * accounted for. + */ static int get_bar_in_mchbar(device_t dev, unsigned int index, u32 *base, - u32 *len) + u32 *len) { u32 bar; @@ -114,7 +118,7 @@ struct fixed_mmio_descriptor { unsigned int index; u32 size; int (*get_resource)(device_t dev, unsigned int index, - u32 *base, u32 *size); + u32 *base, u32 *size); const char *description; }; @@ -144,13 +148,13 @@ static void mc_add_fixed_mmio_resources(device_t dev) size = mc_fixed_resources[i].size; index = mc_fixed_resources[i].index; if (!mc_fixed_resources[i].get_resource(dev, index, - &base, &size)) + &base, &size)) continue; resource = new_resource(dev, mc_fixed_resources[i].index); resource->flags = IORESOURCE_MEM | IORESOURCE_FIXED | - IORESOURCE_STORED | IORESOURCE_RESERVE | - IORESOURCE_ASSIGNED; + IORESOURCE_STORED | IORESOURCE_RESERVE | + IORESOURCE_ASSIGNED; resource->base = base; resource->size = size; printk(BIOS_DEBUG, "%s: Adding %s @ %x 0x%08lx-0x%08lx.\n", @@ -159,7 +163,8 @@ static void mc_add_fixed_mmio_resources(device_t dev) } } -/* Host Memory Map: +/* + * Host Memory Map: * * +--------------------------+ TOUUD * | | @@ -172,6 +177,10 @@ static void mc_add_fixed_mmio_resources(device_t dev) * +--------------------------+ BGSM * | TSEG | * +--------------------------+ TSEGMB + * | DMA Protected Region | + * +--------------------------+ DPR + * | Reserved - FSP | + * +--------------------------+ RSVFSP * | Usage DRAM | * +--------------------------+ 0 * @@ -189,7 +198,7 @@ struct map_entry { }; static void read_map_entry(device_t dev, struct map_entry *entry, - uint64_t *result) + uint64_t *result) { uint64_t value; uint64_t mask; @@ -240,7 +249,7 @@ enum { BGSM_REG, BDSM_REG, TSEG_REG, - // Must be last. + /* Must be last. */ NUM_MAP_ENTRIES }; @@ -260,9 +269,8 @@ static struct map_entry memory_map[NUM_MAP_ENTRIES] = { static void mc_read_map_entries(device_t dev, uint64_t *values) { int i; - for (i = 0; i < NUM_MAP_ENTRIES; i++) { + for (i = 0; i < NUM_MAP_ENTRIES; i++) read_map_entry(dev, &memory_map[i], &values[i]); - } } static void mc_report_map_entries(device_t dev, uint64_t *values) @@ -343,23 +351,26 @@ static void mc_add_dram_resources(device_t dev) base_k = 0xc0000 >> 10; size_k = (unsigned long)(mc_values[TSEG_REG] >> 10) - base_k; size_k -= dpr_size >> 10; + size_k -= CONFIG_CHIPSET_RESERVED_MEM_BYTES >> 10; ram_resource(dev, index++, base_k, size_k); /* TSEG - DPR -> BGSM */ resource = new_resource(dev, index++); resource->base = mc_values[TSEG_REG] - dpr_size; resource->size = mc_values[BGSM_REG] - resource->base; + resource->base -= CONFIG_CHIPSET_RESERVED_MEM_BYTES; + resource->size += CONFIG_CHIPSET_RESERVED_MEM_BYTES; resource->flags = IORESOURCE_MEM | IORESOURCE_FIXED | - IORESOURCE_STORED | IORESOURCE_RESERVE | - IORESOURCE_ASSIGNED | IORESOURCE_CACHEABLE; + IORESOURCE_STORED | IORESOURCE_RESERVE | + IORESOURCE_ASSIGNED | IORESOURCE_CACHEABLE; /* BGSM -> TOLUD */ resource = new_resource(dev, index++); resource->base = mc_values[BGSM_REG]; resource->size = mc_values[TOLUD_REG] - resource->base; resource->flags = IORESOURCE_MEM | IORESOURCE_FIXED | - IORESOURCE_STORED | IORESOURCE_RESERVE | - IORESOURCE_ASSIGNED; + IORESOURCE_STORED | IORESOURCE_RESERVE | + IORESOURCE_ASSIGNED; /* 4GiB -> TOUUD */ base_k = 4096 * 1024; /* 4GiB */ @@ -368,14 +379,15 @@ static void mc_add_dram_resources(device_t dev) if (touud_k > base_k) ram_resource(dev, index++, base_k, size_k); - /* Reserve everything between A segment and 1MB: + /* + * Reserve everything between A segment and 1MB: * * 0xa0000 - 0xbffff: legacy VGA * 0xc0000 - 0xfffff: RAM */ mmio_resource(dev, index++, (0xa0000 >> 10), (0xc0000 - 0xa0000) >> 10); reserved_ram_resource(dev, index++, (0xc0000 >> 10), - (0x100000 - 0xc0000) >> 10); + (0x100000 - 0xc0000) >> 10); chromeos_reserve_ram_oops(dev, index++); } @@ -416,32 +428,39 @@ static void systemagent_init(struct device *dev) set_power_limits(28); } -unsigned long acpi_fill_slit(unsigned long current) +static void systemagent_enable(device_t dev) { - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; +#if CONFIG_HAVE_ACPI_RESUME + struct romstage_handoff *handoff; + + handoff = cbmem_find(CBMEM_ID_ROMSTAGE_INFO); + + if (handoff == NULL) { + printk(BIOS_DEBUG, "Unknown boot method, assuming normal.\n"); + acpi_slp_type = 0; + } else if (handoff->s3_resume) { + printk(BIOS_DEBUG, "S3 Resume.\n"); + acpi_slp_type = 3; + } else { + printk(BIOS_DEBUG, "Normal boot.\n"); + acpi_slp_type = 0; + } +#endif } static struct device_operations systemagent_ops = { .read_resources = &systemagent_read_resources, - .acpi_fill_ssdt_generator = &generate_cpu_entries, .set_resources = &pci_dev_set_resources, .enable_resources = &pci_dev_enable_resources, .init = &systemagent_init, - .ops_pci = &broadwell_pci_ops, + .enable = &systemagent_enable, + .ops_pci = &soc_pci_ops, }; static const unsigned short systemagent_ids[] = { - 0x0a04, /* Haswell ULT */ - 0x1604, /* Broadwell-U/Y */ - 0x1610, /* Broadwell-H Desktop */ - 0x1614, /* Broadwell-H Mobile */ + MCH_SKYLAKE_ID_U, + MCH_SKYLAKE_ID_Y, + MCH_SKYLAKE_ID_ULX, 0 }; diff --git a/src/soc/intel/skylake/tsc_freq.c b/src/soc/intel/skylake/tsc_freq.c index 5487b16..5990d27 100644 --- a/src/soc/intel/skylake/tsc_freq.c +++ b/src/soc/intel/skylake/tsc_freq.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <stdint.h> diff --git a/src/soc/intel/skylake/uart.c b/src/soc/intel/skylake/uart.c new file mode 100644 index 0000000..36b1b5a --- /dev/null +++ b/src/soc/intel/skylake/uart.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <console/uart.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <stdlib.h> +#include <soc/pci_devs.h> +#include <soc/ramstage.h> + +static int pch_uart_is_debug(struct device *dev) +{ + if (!IS_ENABLED(CONFIG_INTEL_PCH_UART_CONSOLE)) + return 0; + + switch (dev->path.pci.devfn) { + case PCH_DEVFN_UART0: + return CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 0; + case PCH_DEVFN_UART1: + return CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 1; + case PCH_DEVFN_UART2: + return CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 2; + } + return 0; +} + +static void pch_uart_read_resources(struct device *dev) +{ + pci_dev_read_resources(dev); + + /* Set the configured UART base address for the debug port */ + if (pch_uart_is_debug(dev)) { + struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0); + res->size = 0x1000; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | + IORESOURCE_FIXED; + } +} + +static struct device_operations device_ops = { + .read_resources = &pch_uart_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .ops_pci = &soc_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { + 0x9d27, /* UART0 */ + 0x9d28, /* UART1 */ + 0x9d66, /* UART2 */ + 0 +}; + +static const struct pci_driver pch_uart __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/soc/intel/skylake/usbdebug.c b/src/soc/intel/skylake/usbdebug.c deleted file mode 100644 index 736a1a3..0000000 --- a/src/soc/intel/skylake/usbdebug.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <arch/io.h> -#include <console/console.h> -#include <usbdebug.h> -#include <device/pci.h> -#include <device/pci_def.h> -#include <soc/pci_devs.h> - -void set_debug_port(unsigned int port) -{ - /* Hardcoded to physical port 1 */ -} - -void enable_usbdebug(unsigned int port) -{ - u32 tmp32; - - tmp32 = pci_read_config32(PCH_DEV_EHCI, PCI_VENDOR_ID); - if (tmp32 == 0xffffffff || tmp32 == 0) - return; - - /* Set the EHCI BAR address. */ - pci_write_config32(PCH_DEV_EHCI, EHCI_BAR_INDEX, CONFIG_EHCI_BAR); - - /* Enable access to the EHCI memory space registers. */ - pci_write_config8(PCH_DEV_EHCI, PCI_COMMAND, PCI_COMMAND_MEMORY); - - /* Force ownership of the Debug Port to the EHCI controller. */ - tmp32 = read32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET); - tmp32 |= (1 << 30); - write32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET, tmp32); -} diff --git a/src/soc/intel/skylake/xhci.c b/src/soc/intel/skylake/xhci.c index 9d0390e..0f927f1 100644 --- a/src/soc/intel/skylake/xhci.c +++ b/src/soc/intel/skylake/xhci.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc. */ #include <console/console.h> @@ -27,8 +28,8 @@ #include <soc/xhci.h> #include <soc/cpu.h> -#ifdef __SMM__ -static u8 *usb_xhci_mem_base(device_t dev) +#if ENV_SMM +static u32 usb_xhci_mem_base(device_t dev) { u32 mem_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); @@ -36,7 +37,7 @@ static u8 *usb_xhci_mem_base(device_t dev) if (mem_base == 0 || mem_base == 0xffffffff) return 0; - return (u8 *)(mem_base & ~0xf); + return mem_base & ~0xf; } static int usb_xhci_port_count_usb3(device_t dev) @@ -77,7 +78,7 @@ static void usb_xhci_reset_usb3(device_t dev, int all) u32 status, port_disabled; int timeout, port; int port_count = usb_xhci_port_count_usb3(dev); - u8 *mem_base = usb_xhci_mem_base(dev); + u8 *mem_base = (u8 *)usb_xhci_mem_base(dev); if (!mem_base || !port_count) return; @@ -147,8 +148,8 @@ void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ) { u16 reg16; u32 reg32; - u8 *mem_base = usb_xhci_mem_base(dev); - u8 is_broadwell = !!(cpu_family_model() == BROADWELL_FAMILY_ULT); + u8 *mem_base = (u8 *)usb_xhci_mem_base(dev); + u8 is_ult = !!(cpu_family_model() == SKYLAKE_FAMILY_ULT); if (!mem_base || slp_typ < 3) return; @@ -159,7 +160,7 @@ void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ) reg16 |= XHCI_PWR_CTL_SET_D0; pci_write_config16(dev, XHCI_PWR_CTL_STS, reg16); - if (!is_broadwell) { + if (!is_ult) { /* This WA is only for lpt */ /* Clear PCI 0xB0[14:13] */ @@ -179,15 +180,6 @@ void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ) reg32 = read32(mem_base + 0x80e0); reg32 |= (1 << 15); write32(mem_base + 0x80e0, reg32); - } else { - /* - * Clear port change status bits. Clearing CSC alone seemed to - * fix wakeup from S3 if entering USB compliance state even if - * bit wasn't set on the port. - */ - int port; - for (port = 0; port < usb_xhci_port_count_usb3(dev); port++) - usb_xhci_reset_status_usb3(mem_base, port); } reg32 = read32(mem_base + 0x8154); @@ -199,37 +191,17 @@ void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ) pci_or_config16(dev, XHCI_PWR_CTL_STS, XHCI_PWR_CTL_STATUS_PME); pci_or_config16(dev, XHCI_PWR_CTL_STS, XHCI_PWR_CTL_ENABLE_PME); } -#else /* !__SMM__ */ - -static void xhci_init(struct device *dev) -{ - struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0); - u16 reg16; - u32 reg32; - - /* Ensure controller is in D0 state */ - reg16 = pci_read_config16(dev, XHCI_PWR_CTL_STS); - reg16 &= ~XHCI_PWR_CTL_SET_MASK; - reg16 |= XHCI_PWR_CTL_SET_D0; - pci_write_config16(dev, XHCI_PWR_CTL_STS, reg16); - - /* Disable Compliance Mode Entry */ - reg32 = read32(res2mmio(res, 0x80ec, 0)); - reg32 |= (1 << 0); - write32(res2mmio(res, 0x80ec, 0), reg32); -} +#else /* !ENV_SMM */ static struct device_operations usb_xhci_ops = { .read_resources = &pci_dev_read_resources, .set_resources = &pci_dev_set_resources, .enable_resources = &pci_dev_enable_resources, - .ops_pci = &broadwell_pci_ops, - .init = &xhci_init, + .ops_pci = &soc_pci_ops, }; static const unsigned short pci_device_ids[] = { - 0x9c31, /* LynxPoint-LP */ - 0x9cb1, /* WildcatPoint */ + 0x9d2f, /* SunRisePoint LP */ 0 }; @@ -238,4 +210,4 @@ static const struct pci_driver pch_usb_xhci __pci_driver = { .vendor = PCI_VENDOR_ID_INTEL, .devices = pci_device_ids, }; -#endif /* !__SMM__ */ +#endif /* ENV_SMM */

1 0

Patch set updated for coreboot: soc/intel/skylake: Use Broadwell as comparision base for Skylake SOC
by Leroy P Leahy 14 Jul '15

14 Jul '15

Leroy P Leahy (leroy.p.leahy(a)intel.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10340 -gerrit commit fee624f7b03367a5224d9638718121b49677a851 Author: Lee Leahy <leroy.p.leahy(a)intel.com> Date: Tue May 12 18:19:47 2015 -0700 soc/intel/skylake: Use Broadwell as comparision base for Skylake SOC Use the Broadwell implementation as the comparison base for Skylake. BRANCH=none BUG=None TEST=None Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8 Signed-off-by: Lee Leahy <leroy.p.leahy(a)intel.com> --- src/soc/intel/skylake/Kconfig | 278 ++++++ src/soc/intel/skylake/Makefile.inc | 134 +++ src/soc/intel/skylake/acpi.c | 602 ++++++++++++ src/soc/intel/skylake/acpi/adsp.asl | 73 ++ src/soc/intel/skylake/acpi/cpu.asl | 122 +++ src/soc/intel/skylake/acpi/ctdp.asl | 237 +++++ src/soc/intel/skylake/acpi/device_nvs.asl | 54 ++ src/soc/intel/skylake/acpi/ehci.asl | 51 + src/soc/intel/skylake/acpi/globalnvs.asl | 109 +++ src/soc/intel/skylake/acpi/gpio.asl | 142 +++ src/soc/intel/skylake/acpi/hda.asl | 29 + src/soc/intel/skylake/acpi/irqlinks.asl | 492 ++++++++++ src/soc/intel/skylake/acpi/lpc.asl | 208 +++++ src/soc/intel/skylake/acpi/pch.asl | 101 ++ src/soc/intel/skylake/acpi/pci_irqs.asl | 89 ++ src/soc/intel/skylake/acpi/pcie.asl | 214 +++++ src/soc/intel/skylake/acpi/pcie_port.asl | 28 + src/soc/intel/skylake/acpi/platform.asl | 91 ++ src/soc/intel/skylake/acpi/sata.asl | 25 + src/soc/intel/skylake/acpi/serialio.asl | 627 +++++++++++++ src/soc/intel/skylake/acpi/sleepstates.asl | 26 + src/soc/intel/skylake/acpi/smbus.asl | 241 +++++ src/soc/intel/skylake/acpi/systemagent.asl | 213 +++++ src/soc/intel/skylake/acpi/xhci.asl | 371 ++++++++ src/soc/intel/skylake/adsp.c | 167 ++++ src/soc/intel/skylake/bootblock/Makefile.inc | 1 + src/soc/intel/skylake/bootblock/cpu.c | 142 +++ src/soc/intel/skylake/bootblock/pch.c | 79 ++ src/soc/intel/skylake/bootblock/systemagent.c | 44 + src/soc/intel/skylake/bootblock/timestamp.inc | 19 + src/soc/intel/skylake/chip.c | 80 ++ src/soc/intel/skylake/chip.h | 167 ++++ src/soc/intel/skylake/cpu.c | 735 +++++++++++++++ src/soc/intel/skylake/cpu_info.c | 52 ++ src/soc/intel/skylake/ehci.c | 103 ++ src/soc/intel/skylake/elog.c | 141 +++ src/soc/intel/skylake/finalize.c | 126 +++ src/soc/intel/skylake/gpio.c | 199 ++++ src/soc/intel/skylake/hda.c | 181 ++++ src/soc/intel/skylake/igd.c | 584 ++++++++++++ src/soc/intel/skylake/include/soc/acpi.h | 37 + src/soc/intel/skylake/include/soc/adsp.h | 56 ++ src/soc/intel/skylake/include/soc/cpu.h | 73 ++ src/soc/intel/skylake/include/soc/device_nvs.h | 44 + src/soc/intel/skylake/include/soc/ehci.h | 32 + src/soc/intel/skylake/include/soc/gpio.h | 192 ++++ src/soc/intel/skylake/include/soc/iobp.h | 28 + src/soc/intel/skylake/include/soc/iomap.h | 62 ++ src/soc/intel/skylake/include/soc/lpc.h | 93 ++ src/soc/intel/skylake/include/soc/me.h | 507 ++++++++++ src/soc/intel/skylake/include/soc/msr.h | 109 +++ src/soc/intel/skylake/include/soc/nvs.h | 71 ++ src/soc/intel/skylake/include/soc/pch.h | 52 ++ src/soc/intel/skylake/include/soc/pci_devs.h | 119 +++ src/soc/intel/skylake/include/soc/pei_data.h | 199 ++++ src/soc/intel/skylake/include/soc/pei_wrapper.h | 49 + src/soc/intel/skylake/include/soc/pm.h | 172 ++++ src/soc/intel/skylake/include/soc/ramstage.h | 38 + src/soc/intel/skylake/include/soc/rcba.h | 178 ++++ src/soc/intel/skylake/include/soc/reset.h | 25 + src/soc/intel/skylake/include/soc/romstage.h | 61 ++ src/soc/intel/skylake/include/soc/sata.h | 89 ++ src/soc/intel/skylake/include/soc/serialio.h | 94 ++ src/soc/intel/skylake/include/soc/smbus.h | 52 ++ src/soc/intel/skylake/include/soc/smm.h | 73 ++ src/soc/intel/skylake/include/soc/spi.h | 110 +++ src/soc/intel/skylake/include/soc/systemagent.h | 135 +++ src/soc/intel/skylake/include/soc/xhci.h | 61 ++ src/soc/intel/skylake/iobp.c | 152 +++ src/soc/intel/skylake/lpc.c | 670 +++++++++++++ src/soc/intel/skylake/me.c | 1085 ++++++++++++++++++++++ src/soc/intel/skylake/me_status.c | 321 +++++++ src/soc/intel/skylake/memmap.c | 46 + src/soc/intel/skylake/microcode/Makefile.inc | 1 + src/soc/intel/skylake/microcode/microcode_blob.c | 23 + src/soc/intel/skylake/minihd.c | 128 +++ src/soc/intel/skylake/monotonic_timer.c | 63 ++ src/soc/intel/skylake/pch.c | 221 +++++ src/soc/intel/skylake/pcie.c | 710 ++++++++++++++ src/soc/intel/skylake/pei_data.c | 49 + src/soc/intel/skylake/pmutil.c | 452 +++++++++ src/soc/intel/skylake/ramstage.c | 100 ++ src/soc/intel/skylake/refcode.c | 146 +++ src/soc/intel/skylake/reset.c | 49 + src/soc/intel/skylake/romstage/Makefile.inc | 13 + src/soc/intel/skylake/romstage/cache_as_ram.inc | 341 +++++++ src/soc/intel/skylake/romstage/cpu.c | 55 ++ src/soc/intel/skylake/romstage/pch.c | 161 ++++ src/soc/intel/skylake/romstage/power_state.c | 132 +++ src/soc/intel/skylake/romstage/raminit.c | 138 +++ src/soc/intel/skylake/romstage/report_platform.c | 243 +++++ src/soc/intel/skylake/romstage/romstage.c | 164 ++++ src/soc/intel/skylake/romstage/smbus.c | 54 ++ src/soc/intel/skylake/romstage/spi.c | 149 +++ src/soc/intel/skylake/romstage/stack.c | 124 +++ src/soc/intel/skylake/romstage/systemagent.c | 55 ++ src/soc/intel/skylake/romstage/uart.c | 85 ++ src/soc/intel/skylake/sata.c | 264 ++++++ src/soc/intel/skylake/serialio.c | 318 +++++++ src/soc/intel/skylake/smbus.c | 113 +++ src/soc/intel/skylake/smbus_common.c | 155 ++++ src/soc/intel/skylake/smi.c | 123 +++ src/soc/intel/skylake/smihandler.c | 591 ++++++++++++ src/soc/intel/skylake/smmrelocate.c | 439 +++++++++ src/soc/intel/skylake/spi.c | 680 ++++++++++++++ src/soc/intel/skylake/stage_cache.c | 35 + src/soc/intel/skylake/systemagent.c | 452 +++++++++ src/soc/intel/skylake/tsc_freq.c | 32 + src/soc/intel/skylake/usbdebug.c | 51 + src/soc/intel/skylake/xhci.c | 241 +++++ 110 files changed, 19612 insertions(+) diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig new file mode 100644 index 0000000..0864e57 --- /dev/null +++ b/src/soc/intel/skylake/Kconfig @@ -0,0 +1,278 @@ +config SOC_INTEL_SKYLAKE + bool + help + Intel Skylake support + +if SOC_INTEL_SKYLAKE + +config CPU_SPECIFIC_OPTIONS + def_bool y + select ARCH_BOOTBLOCK_X86_32 + select ARCH_VERSTAGE_X86_32 + select ARCH_ROMSTAGE_X86_32 + select ARCH_RAMSTAGE_X86_32 + select ALT_CBFS_LOAD_PAYLOAD + select ALWAYS_LOAD_OPROM + select BACKUP_DEFAULT_SMM_REGION + select CACHE_MRC_BIN + select CACHE_MRC_SETTINGS + select MRC_SETTINGS_PROTECT + select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM + select CACHE_ROM + select CAR_MIGRATION + select COLLECT_TIMESTAMPS + select CPU_INTEL_FIRMWARE_INTERFACE_TABLE + select SUPPORT_CPU_UCODE_IN_CBFS + select HAVE_MONOTONIC_TIMER + select HAVE_SMI_HANDLER + select HAVE_HARD_RESET + select HAVE_USBDEBUG + select IOAPIC + select MMCONF_SUPPORT + select MMCONF_SUPPORT_DEFAULT + select RELOCATABLE_MODULES + select RELOCATABLE_RAMSTAGE + select REG_SCRIPT + select PARALLEL_MP + select PCIEXP_ASPM + select PCIEXP_COMMON_CLOCK + select PCIEXP_CLK_PM + select PCIEXP_L1_SUB_STATE + select SMM_MODULES + select SMM_TSEG + select SMP + select SPI_FLASH + select SSE2 + select SUPPORT_CPU_UCODE_IN_CBFS + select TSC_CONSTANT_RATE + select TSC_SYNC_MFENCE + select UDELAY_TSC + select PER_DEVICE_ACPI_TABLES + select SOC_INTEL_COMMON + +config BOOTBLOCK_CPU_INIT + string + default "soc/intel/skylake/bootblock/cpu.c" + +config BOOTBLOCK_NORTHBRIDGE_INIT + string + default "soc/intel/skylake/bootblock/systemagent.c" + +config BOOTBLOCK_SOUTHBRIDGE_INIT + string + default "soc/intel/skylake/bootblock/pch.c" + + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config SERIAL_CPU_INIT + bool + default n + +config SMM_TSEG_SIZE + hex + default 0x800000 + +config IED_REGION_SIZE + hex + default 0x400000 + +config SMM_RESERVED_SIZE + hex + default 0x100000 + +config VGA_BIOS_ID + string + default "8086,0406" + +config CACHE_MRC_SIZE_KB + int + default 512 + +config DCACHE_RAM_BASE + hex + default 0xff7c0000 + +config DCACHE_RAM_SIZE + hex + default 0x10000 + help + The size of the cache-as-ram region required during bootblock + and/or romstage. Note DCACHE_RAM_SIZE and DCACHE_RAM_MRC_VAR_SIZE + must add up to a power of 2. + +config DCACHE_RAM_MRC_VAR_SIZE + hex + default 0x30000 + help + The amount of cache-as-ram region required by the reference code. + +config DCACHE_RAM_ROMSTAGE_STACK_SIZE + hex + default 0x2000 + help + The amount of anticipated stack usage from the data cache + during pre-ram rom stage execution. + +config HAVE_MRC + bool "Add a Memory Reference Code binary" + help + Select this option to add a Memory Reference Code binary to + the resulting coreboot image. + + Note: Without this binary coreboot will not work + +if HAVE_MRC + +config MRC_FILE + string "Intel Memory Reference Code path and filename" + depends on HAVE_MRC + default "mrc.bin" + help + The filename of the file to use as Memory Reference Code binary. + +config MRC_BIN_ADDRESS + hex + default 0xfffa0000 + +config CACHE_MRC_SETTINGS + bool "Save cached MRC settings" + default y + +endif # HAVE_MRC + +config CBFS_SIZE + hex "Size of CBFS filesystem in ROM" + default 0x100000 + help + The firmware image has to store more than just coreboot, including: + - a firmware descriptor + - Intel Management Engine firmware + - MRC cache information + This option allows to limit the size of the CBFS portion in the + firmware image. + +config PRE_GRAPHICS_DELAY + int "Graphics initialization delay in ms" + default 0 + help + On some systems, coreboot boots so fast that connected monitors + (mostly TVs) won't be able to wake up fast enough to talk to the + VBIOS. On those systems we need to wait for a bit before executing + the VBIOS. + +config RESET_ON_INVALID_RAMSTAGE_CACHE + bool "Reset the system on S3 wake when ramstage cache invalid." + default n + depends on RELOCATABLE_RAMSTAGE + help + The romstage code caches the loaded ramstage program in SMM space. + On S3 wake the romstage will copy over a fresh ramstage that was + cached in the SMM space. This option determines the action to take + when the ramstage cache is invalid. If selected the system will + reset otherwise the ramstage will be reloaded from cbfs. + +config INTEL_PCH_UART_CONSOLE + bool "Use Serial IO UART for console" + default n + select HAVE_UART_MEMORY_MAPPED + select CONSOLE_SERIAL8250MEM + depends on !CONFIG_DRIVERS_OXFORD_OXPCIE + +config INTEL_PCH_UART_CONSOLE_NUMBER + hex "Serial IO UART number to use for console" + default "0x0" + depends on INTEL_PCH_UART_CONSOLE + +config TTYS0_BASE + hex + default 0xd6000000 + depends on INTEL_PCH_UART_CONSOLE + +config EHCI_BAR + hex + default 0xd8000000 + +config EHCI_DEBUG_OFFSET + hex + default 0xa0 + +config SERIRQ_CONTINUOUS_MODE + bool + default y + help + If you set this option to y, the serial IRQ machine will be + operated in continuous mode. +config HAVE_ME_BIN + bool "Add Intel Management Engine firmware" + default y + help + The Intel processor in the selected system requires a special firmware + for an integrated controller called Management Engine (ME). The ME + firmware might be provided in coreboot's 3rdparty/blobs repository. If + not and if you don't have the firmware elsewhere, you can still + build coreboot without it. In this case however, you'll have to make + sure that you don't overwrite your ME firmware on your flash ROM. + +config ME_BIN_PATH + string "Path to management engine firmware" + depends on HAVE_ME_BIN + default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin" + +config HAVE_IFD_BIN + bool "Use Intel Firmware Descriptor from existing binary" + default n + +config BUILD_WITH_FAKE_IFD + bool "Build with a fake IFD" + default y if !HAVE_IFD_BIN + help + If you don't have an Intel Firmware Descriptor (ifd.bin) for your + board, you can select this option and coreboot will build without it. + Though, the resulting coreboot.rom will not contain all parts required + to get coreboot running on your board. You can however write only the + BIOS section to your board's flash ROM and keep the other sections + untouched. Unfortunately the current version of flashrom doesn't + support this yet. But there is a patch pending [1]. + + WARNING: Never write a complete coreboot.rom to your flash ROM if it + was built with a fake IFD. It just won't work. + + [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html + +config IFD_BIOS_SECTION + depends on BUILD_WITH_FAKE_IFD + string + default "" + +config IFD_ME_SECTION + depends on BUILD_WITH_FAKE_IFD + string + default "" + +config IFD_PLATFORM_SECTION + depends on BUILD_WITH_FAKE_IFD + string + default "" + +config IFD_BIN_PATH + string "Path to intel firmware descriptor" + depends on !BUILD_WITH_FAKE_IFD + default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin" + +config LOCK_MANAGEMENT_ENGINE + bool "Lock Management Engine section" + default n + help + The Intel Management Engine supports preventing write accesses + from the host to the Management Engine section in the firmware + descriptor. If the ME section is locked, it can only be overwritten + with an external SPI flash programmer. You will want this if you + want to increase security of your ROM image once you are sure + that the ME firmware is no longer going to change. + + If unsure, say N. + +endif diff --git a/src/soc/intel/skylake/Makefile.inc b/src/soc/intel/skylake/Makefile.inc new file mode 100644 index 0000000..dafceb7 --- /dev/null +++ b/src/soc/intel/skylake/Makefile.inc @@ -0,0 +1,134 @@ +ifeq ($(CONFIG_SOC_INTEL_SKYLAKE),y) + +subdirs-y += bootblock +subdirs-y += microcode +subdirs-y += romstage +subdirs-y += ../../../cpu/x86/lapic +subdirs-y += ../../../cpu/x86/mtrr +subdirs-y += ../../../cpu/x86/smm +subdirs-y += ../../../cpu/x86/tsc +subdirs-y += ../../../cpu/intel/microcode +subdirs-y += ../../../cpu/intel/turbo + +ramstage-y += acpi.c +ramstage-y += adsp.c +ramstage-y += chip.c +ramstage-y += cpu.c +ramstage-y += cpu_info.c +smm-y += cpu_info.c +ramstage-$(CONFIG_ELOG) += elog.c +ramstage-y += finalize.c +ramstage-y += gpio.c +romstage-y += gpio.c +smm-y += gpio.c +ramstage-y += hda.c +ramstage-y += igd.c +ramstage-y += iobp.c +romstage-y += iobp.c +ramstage-y += lpc.c +ramstage-y += me.c +ramstage-y += me_status.c +romstage-y += me_status.c +ramstage-y += memmap.c +romstage-y += memmap.c +ramstage-y += minihd.c +ramstage-y += monotonic_timer.c +smm-y += monotonic_timer.c +ramstage-y += pch.c +romstage-y += pch.c +ramstage-y += pcie.c +ramstage-y += pei_data.c +romstage-y += pei_data.c +ramstage-y += pmutil.c +romstage-y += pmutil.c +smm-y += pmutil.c +ramstage-y += ramstage.c +ramstage-$(CONFIG_HAVE_REFCODE_BLOB) += refcode.c +ramstage-y += reset.c +romstage-y += reset.c +ramstage-y += sata.c +ramstage-y += serialio.c +ramstage-y += smbus.c +ramstage-y += smbus_common.c +romstage-y += smbus_common.c +ramstage-y += smi.c +smm-y += smihandler.c +ramstage-y += smmrelocate.c +ramstage-y += spi.c +smm-$(CONFIG_SPI_FLASH_SMM) += spi.c +ramstage-y += stage_cache.c +romstage-y += stage_cache.c +ramstage-y += systemagent.c +ramstage-y += tsc_freq.c +romstage-y += tsc_freq.c +smm-y += tsc_freq.c +ramstage-y += ehci.c +ramstage-y += xhci.c +smm-y += xhci.c + +ifeq ($(CONFIG_USBDEBUG),y) +ramstage-y += usbdebug.c +romstage-y += usbdebug.c +smm-y += usbdebug.c +endif + +CPPFLAGS_common += -Isrc/soc/intel/broadwell/include + +# Run an intermediate step when producing coreboot.rom +# that adds additional components to the final firmware +# image outside of CBFS +INTERMEDIATE := broadwell_add_me + +ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y) +IFD_BIN_PATH := $(objgenerated)/ifdfake.bin +IFD_SECTIONS := $(addprefix -b ,$(CONFIG_IFD_BIOS_SECTION:"%"=%)) \ + $(addprefix -m ,$(CONFIG_IFD_ME_SECTION:"%"=%)) \ + $(addprefix -p ,$(CONFIG_IFD_PLATFORM_SECTION:"%"=%)) +else +IFD_BIN_PATH := $(CONFIG_IFD_BIN_PATH) +endif + +broadwell_add_me: $(obj)/coreboot.pre $(IFDTOOL) $(IFDFAKE) +ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y) + printf "\n** WARNING **\n" + printf "Coreboot will be built with a fake Intel Firmware Descriptor (IFD).\n" + printf "Never write a complete coreboot.rom with a fake IFD to your board's\n" + printf "flash ROM! Make sure that you only write valid flash regions.\n\n" + printf " IFDFAKE Building a fake Intel Firmware Descriptor\n" + $(IFDFAKE) $(IFD_SECTIONS) $(IFD_BIN_PATH) +endif + printf " DD Adding Intel Firmware Descriptor\n" + dd if=$(IFD_BIN_PATH) \ + of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1 +ifeq ($(CONFIG_HAVE_ME_BIN),y) + printf " IFDTOOL me.bin -> coreboot.pre\n" + $(objutil)/ifdtool/ifdtool \ + -i ME:$(CONFIG_ME_BIN_PATH) \ + $(obj)/coreboot.pre + mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre +ifeq ($(CONFIG_LOCK_MANAGEMENT_ENGINE),y) + printf " IFDTOOL Locking Management Engine\n" + $(objutil)/ifdtool/ifdtool -l $(obj)/coreboot.pre + mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre +else + printf " IFDTOOL Unlocking Management Engine\n" + $(objutil)/ifdtool/ifdtool -u $(obj)/coreboot.pre + mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre +endif +endif + +PHONY += broadwell_add_me + +# If an MRC file is an ELF file determine the entry address and first loadable +# section offset in the file. Subtract the offset from the entry address to +# determine the final location. +mrcelfoffset = $(shell $(READELF_x86_32) -S -W $(CONFIG_MRC_FILE) | sed -e 's/\[ /[0/' | awk '$$3 ~ /PROGBITS/ { print "0x"$$5; exit }' ) +mrcelfentry = $(shell $(READELF_x86_32) -h -W $(CONFIG_MRC_FILE) | grep 'Entry point address' | awk '{print $$NF }') + +# Add memory reference code blob. +cbfs-files-$(CONFIG_HAVE_MRC) += mrc.bin +mrc.bin-file := $(call strip_quotes,$(CONFIG_MRC_FILE)) +mrc.bin-position := $(if $(findstring elf,$(CONFIG_MRC_FILE)),$(shell printf "0x%x" $$(( $(mrcelfentry) - $(mrcelfoffset) )) ),$(CONFIG_MRC_BIN_ADDRESS)) +mrc.bin-type := mrc + +endif diff --git a/src/soc/intel/skylake/acpi.c b/src/soc/intel/skylake/acpi.c new file mode 100644 index 0000000..f038e87 --- /dev/null +++ b/src/soc/intel/skylake/acpi.c @@ -0,0 +1,602 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/io.h> +#include <arch/smp/mpspec.h> +#include <cbmem.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <console/console.h> +#include <types.h> +#include <string.h> +#include <arch/cpu.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/tsc.h> +#include <cpu/intel/turbo.h> +#include <ec/google/chromeec/ec.h> +#include <vendorcode/google/chromeos/gnvs.h> +#include <soc/acpi.h> +#include <soc/cpu.h> +#include <soc/iomap.h> +#include <soc/lpc.h> +#include <soc/msr.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> +#include <soc/intel/broadwell/chip.h> + +/* + * List of supported C-states in this processor. Only the ULT parts support C8, + * C9, and C10. + */ +enum { + C_STATE_C0, /* 0 */ + C_STATE_C1, /* 1 */ + C_STATE_C1E, /* 2 */ + C_STATE_C3, /* 3 */ + C_STATE_C6_SHORT_LAT, /* 4 */ + C_STATE_C6_LONG_LAT, /* 5 */ + C_STATE_C7_SHORT_LAT, /* 6 */ + C_STATE_C7_LONG_LAT, /* 7 */ + C_STATE_C7S_SHORT_LAT, /* 8 */ + C_STATE_C7S_LONG_LAT, /* 9 */ + C_STATE_C8, /* 10 */ + C_STATE_C9, /* 11 */ + C_STATE_C10, /* 12 */ + NUM_C_STATES +}; + +#define MWAIT_RES(state, sub_state) \ + { \ + .addrl = (((state) << 4) | (sub_state)), \ + .space_id = ACPI_ADDRESS_SPACE_FIXED, \ + .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, \ + .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, \ + .access_size = ACPI_FFIXEDHW_FLAG_HW_COORD, \ + } + +static acpi_cstate_t cstate_map[NUM_C_STATES] = { + [C_STATE_C0] = { }, + [C_STATE_C1] = { + .latency = 0, + .power = 1000, + .resource = MWAIT_RES(0,0), + }, + [C_STATE_C1E] = { + .latency = 0, + .power = 1000, + .resource = MWAIT_RES(0,1), + }, + [C_STATE_C3] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(0), + .power = 900, + .resource = MWAIT_RES(1, 0), + }, + [C_STATE_C6_SHORT_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(1), + .power = 800, + .resource = MWAIT_RES(2, 0), + }, + [C_STATE_C6_LONG_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(2), + .power = 800, + .resource = MWAIT_RES(2, 1), + }, + [C_STATE_C7_SHORT_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(1), + .power = 700, + .resource = MWAIT_RES(3, 0), + }, + [C_STATE_C7_LONG_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(2), + .power = 700, + .resource = MWAIT_RES(3, 1), + }, + [C_STATE_C7S_SHORT_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(1), + .power = 700, + .resource = MWAIT_RES(3, 2), + }, + [C_STATE_C7S_LONG_LAT] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(2), + .power = 700, + .resource = MWAIT_RES(3, 3), + }, + [C_STATE_C8] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(3), + .power = 600, + .resource = MWAIT_RES(4, 0), + }, + [C_STATE_C9] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(4), + .power = 500, + .resource = MWAIT_RES(5, 0), + }, + [C_STATE_C10] = { + .latency = C_STATE_LATENCY_FROM_LAT_REG(5), + .power = 400, + .resource = MWAIT_RES(6, 0), + }, +}; + +static int cstate_set_s0ix[3] = { + C_STATE_C1E, + C_STATE_C7S_LONG_LAT, + C_STATE_C10 +}; + +static int cstate_set_non_s0ix[3] = { + C_STATE_C1E, + C_STATE_C3, + C_STATE_C7S_LONG_LAT +}; + +static int get_cores_per_package(void) +{ + struct cpuinfo_x86 c; + struct cpuid_result result; + int cores = 1; + + get_fms(&c, cpuid_eax(1)); + if (c.x86 != 6) + return 1; + + result = cpuid_ext(0xb, 1); + cores = result.ebx & 0xff; + + return cores; +} + +void acpi_init_gnvs(global_nvs_t *gnvs) +{ + /* Set unknown wake source */ + gnvs->pm1i = -1; + + /* CPU core count */ + gnvs->pcnt = dev_count_cpu(); + +#if CONFIG_CONSOLE_CBMEM + /* Update the mem console pointer. */ + gnvs->cbmc = (u32)cbmem_find(CBMEM_ID_CONSOLE); +#endif + +#if CONFIG_CHROMEOS + /* Initialize Verified Boot data */ + chromeos_init_vboot(&(gnvs->chromeos)); +#if CONFIG_EC_GOOGLE_CHROMEEC + gnvs->chromeos.vbt2 = google_ec_running_ro() ? + ACTIVE_ECFW_RO : ACTIVE_ECFW_RW; +#endif + gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO; +#endif +} + +void acpi_create_intel_hpet(acpi_hpet_t * hpet) +{ + acpi_header_t *header = &(hpet->header); + acpi_addr_t *addr = &(hpet->addr); + + memset((void *) hpet, 0, sizeof(acpi_hpet_t)); + + /* fill out header fields */ + memcpy(header->signature, "HPET", 4); + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + + header->length = sizeof(acpi_hpet_t); + header->revision = 1; + + /* fill out HPET address */ + addr->space_id = 0; /* Memory */ + addr->bit_width = 64; + addr->bit_offset = 0; + addr->addrl = (unsigned long long)HPET_BASE_ADDRESS & 0xffffffff; + addr->addrh = (unsigned long long)HPET_BASE_ADDRESS >> 32; + + hpet->id = 0x8086a201; /* Intel */ + hpet->number = 0x00; + hpet->min_tick = 0x0080; + + header->checksum = + acpi_checksum((void *) hpet, sizeof(acpi_hpet_t)); +} + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *)current, + MCFG_BASE_ADDRESS, 0, 0, 255); + return current; +} + +void acpi_fill_in_fadt(acpi_fadt_t *fadt) +{ + const uint16_t pmbase = ACPI_BASE_ADDRESS; + + fadt->sci_int = acpi_sci_irq(); + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase + PM1_STS; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + PM1_CNT; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + PM2_CNT; + fadt->pm_tmr_blk = pmbase + PM1_TMR; + fadt->gpe0_blk = pmbase + GPE0_STS(0); + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 32; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 0; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + fadt->reset_value = 6; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = fadt->pm1_evt_len * 8; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase + PM1_STS; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = fadt->pm1_cnt_len * 8; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + PM1_CNT; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = fadt->pm2_cnt_len * 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + PM2_CNT; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = fadt->pm_tmr_len * 8; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + PM1_TMR; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 0; + fadt->x_gpe0_blk.bit_width = 0; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = 0; + fadt->x_gpe0_blk.addrh = 0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; +} + +static acpi_tstate_t tss_table_fine[] = { + { 100, 1000, 0, 0x00, 0 }, + { 94, 940, 0, 0x1f, 0 }, + { 88, 880, 0, 0x1e, 0 }, + { 82, 820, 0, 0x1d, 0 }, + { 75, 760, 0, 0x1c, 0 }, + { 69, 700, 0, 0x1b, 0 }, + { 63, 640, 0, 0x1a, 0 }, + { 57, 580, 0, 0x19, 0 }, + { 50, 520, 0, 0x18, 0 }, + { 44, 460, 0, 0x17, 0 }, + { 38, 400, 0, 0x16, 0 }, + { 32, 340, 0, 0x15, 0 }, + { 25, 280, 0, 0x14, 0 }, + { 19, 220, 0, 0x13, 0 }, + { 13, 160, 0, 0x12, 0 }, +}; + +static acpi_tstate_t tss_table_coarse[] = { + { 100, 1000, 0, 0x00, 0 }, + { 88, 875, 0, 0x1f, 0 }, + { 75, 750, 0, 0x1e, 0 }, + { 63, 625, 0, 0x1d, 0 }, + { 50, 500, 0, 0x1c, 0 }, + { 38, 375, 0, 0x1b, 0 }, + { 25, 250, 0, 0x1a, 0 }, + { 13, 125, 0, 0x19, 0 }, +}; + +static int generate_T_state_entries(int core, int cores_per_package) +{ + int len; + + /* Indicate SW_ALL coordination for T-states */ + len = acpigen_write_TSD_package(core, cores_per_package, SW_ALL); + + /* Indicate FFixedHW so OS will use MSR */ + len += acpigen_write_empty_PTC(); + + /* Set a T-state limit that can be modified in NVS */ + len += acpigen_write_TPC("\\TLVL"); + + /* + * CPUID.(EAX=6):EAX[5] indicates support + * for extended throttle levels. + */ + if (cpuid_eax(6) & (1 << 5)) + len += acpigen_write_TSS_package( + ARRAY_SIZE(tss_table_fine), tss_table_fine); + else + len += acpigen_write_TSS_package( + ARRAY_SIZE(tss_table_coarse), tss_table_coarse); + + return len; +} + +static int generate_C_state_entries(void) +{ + device_t dev = SA_DEV_ROOT; + config_t *config = dev->chip_info; + acpi_cstate_t map[3]; + int *set; + int i; + + if (config->s0ix_enable) + set = cstate_set_s0ix; + else + set = cstate_set_non_s0ix; + + for (i = 0; i < 3; i++) { + memcpy(&map[i], &cstate_map[set[i]], sizeof(acpi_cstate_t)); + map[i].ctype = i + 1; + } + + /* Generate C-state tables */ + return acpigen_write_CST_package(map, ARRAY_SIZE(map)); +} + +static int calculate_power(int tdp, int p1_ratio, int ratio) +{ + u32 m; + u32 power; + + /* + * M = ((1.1 - ((p1_ratio - ratio) * 0.00625)) / 1.1) ^ 2 + * + * Power = (ratio / p1_ratio) * m * tdp + */ + + m = (110000 - ((p1_ratio - ratio) * 625)) / 11; + m = (m * m) / 1000; + + power = ((ratio * 100000 / p1_ratio) / 100); + power *= (m / 100) * (tdp / 1000); + power /= 1000; + + return (int)power; +} + +static void generate_P_state_entries(int core, int cores_per_package) +{ + int ratio_min, ratio_max, ratio_turbo, ratio_step; + int coord_type, power_max, power_unit, num_entries; + int ratio, power, clock, clock_max; + msr_t msr; + + /* Determine P-state coordination type from MISC_PWR_MGMT[0] */ + msr = rdmsr(MSR_MISC_PWR_MGMT); + if (msr.lo & MISC_PWR_MGMT_EIST_HW_DIS) + coord_type = SW_ANY; + else + coord_type = HW_ALL; + + /* Get bus ratio limits and calculate clock speeds */ + msr = rdmsr(MSR_PLATFORM_INFO); + ratio_min = (msr.hi >> (40-32)) & 0xff; /* Max Efficiency Ratio */ + + /* Determine if this CPU has configurable TDP */ + if (cpu_config_tdp_levels()) { + /* Set max ratio to nominal TDP ratio */ + msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); + ratio_max = msr.lo & 0xff; + } else { + /* Max Non-Turbo Ratio */ + ratio_max = (msr.lo >> 8) & 0xff; + } + clock_max = ratio_max * CPU_BCLK; + + /* Calculate CPU TDP in mW */ + msr = rdmsr(MSR_PKG_POWER_SKU_UNIT); + power_unit = 2 << ((msr.lo & 0xf) - 1); + msr = rdmsr(MSR_PKG_POWER_SKU); + power_max = ((msr.lo & 0x7fff) / power_unit) * 1000; + + /* Write _PCT indicating use of FFixedHW */ + acpigen_write_empty_PCT(); + + /* Write _PPC with no limit on supported P-state */ + acpigen_write_PPC_NVS(); + + /* Write PSD indicating configured coordination type */ + acpigen_write_PSD_package(core, 1, coord_type); + + /* Add P-state entries in _PSS table */ + acpigen_write_name("_PSS"); + + /* Determine ratio points */ + ratio_step = PSS_RATIO_STEP; + num_entries = (ratio_max - ratio_min) / ratio_step; + while (num_entries > PSS_MAX_ENTRIES-1) { + ratio_step <<= 1; + num_entries >>= 1; + } + + /* P[T] is Turbo state if enabled */ + if (get_turbo_state() == TURBO_ENABLED) { + /* _PSS package count including Turbo */ + acpigen_write_package(num_entries + 2); + + msr = rdmsr(MSR_TURBO_RATIO_LIMIT); + ratio_turbo = msr.lo & 0xff; + + /* Add entry for Turbo ratio */ + acpigen_write_PSS_package( + clock_max + 1, /*MHz*/ + power_max, /*mW*/ + PSS_LATENCY_TRANSITION, /*lat1*/ + PSS_LATENCY_BUSMASTER, /*lat2*/ + ratio_turbo << 8, /*control*/ + ratio_turbo << 8); /*status*/ + } else { + /* _PSS package count without Turbo */ + acpigen_write_package(num_entries + 1); + } + + /* First regular entry is max non-turbo ratio */ + acpigen_write_PSS_package( + clock_max, /*MHz*/ + power_max, /*mW*/ + PSS_LATENCY_TRANSITION, /*lat1*/ + PSS_LATENCY_BUSMASTER, /*lat2*/ + ratio_max << 8, /*control*/ + ratio_max << 8); /*status*/ + + /* Generate the remaining entries */ + for (ratio = ratio_min + ((num_entries - 1) * ratio_step); + ratio >= ratio_min; ratio -= ratio_step) { + + /* Calculate power at this ratio */ + power = calculate_power(power_max, ratio_max, ratio); + clock = ratio * CPU_BCLK; + + acpigen_write_PSS_package( + clock, /*MHz*/ + power, /*mW*/ + PSS_LATENCY_TRANSITION, /*lat1*/ + PSS_LATENCY_BUSMASTER, /*lat2*/ + ratio << 8, /*control*/ + ratio << 8); /*status*/ + } + + /* Fix package length */ + acpigen_pop_len(); +} + +void generate_cpu_entries(void) +{ + int coreID, cpuID, pcontrol_blk = ACPI_BASE_ADDRESS, plen = 6; + int totalcores = dev_count_cpu(); + int cores_per_package = get_cores_per_package(); + int numcpus = totalcores/cores_per_package; + + printk(BIOS_DEBUG, "Found %d CPU(s) with %d core(s) each.\n", + numcpus, cores_per_package); + + for (cpuID=1; cpuID <=numcpus; cpuID++) { + for (coreID=1; coreID<=cores_per_package; coreID++) { + if (coreID>1) { + pcontrol_blk = 0; + plen = 0; + } + + /* Generate processor \_PR.CPUx */ + acpigen_write_processor( + (cpuID-1)*cores_per_package+coreID-1, + pcontrol_blk, plen); + + /* Generate P-state tables */ + generate_P_state_entries( + coreID-1, cores_per_package); + + /* Generate C-state tables */ + generate_C_state_entries(); + + /* Generate T-state tables */ + generate_T_state_entries( + cpuID-1, cores_per_package); + + acpigen_pop_len(); + } + } +} + +unsigned long acpi_madt_irq_overrides(unsigned long current) +{ + int sci = acpi_sci_irq(); + acpi_madt_irqoverride_t *irqovr; + uint16_t flags = MP_IRQ_TRIGGER_LEVEL; + + /* INT_SRC_OVR */ + irqovr = (void *)current; + current += acpi_create_madt_irqoverride(irqovr, 0, 0, 2, 0); + + if (sci >= 20) + flags |= MP_IRQ_POLARITY_LOW; + else + flags |= MP_IRQ_POLARITY_HIGH; + + /* SCI */ + irqovr = (void *)current; + current += acpi_create_madt_irqoverride(irqovr, 0, sci, sci, flags); + + return current; +} diff --git a/src/soc/intel/skylake/acpi/adsp.asl b/src/soc/intel/skylake/acpi/adsp.asl new file mode 100644 index 0000000..cb10d9a --- /dev/null +++ b/src/soc/intel/skylake/acpi/adsp.asl @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Device (ADSP) +{ + Method (_HID, 0, Serialized) + { + If (\ISWP ()) { + // WildcatPoint + Return ("INT3438") + } + + // LynxPoint-LP + Return ("INT33C8") + } + Name (_UID, 1) + Name (_DDN, "Intel Smart Sound Technology") + + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00100000, BAR0) + Memory32Fixed (ReadWrite, 0x00000000, 0x00001000, BAR1) + Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , ) {3} + }) + + Method (_CRS, 0, NotSerialized) + { + // Update BAR address and length if set in NVS + If (LNotEqual (\S8B0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B8A0) + CreateDwordField (^RBUF, ^BAR1._BAS, B8A1) + Store (\S8B0, B8A0) + Store (\S8B1, B8A1) + } + + Return (RBUF) + } + + Method (_STA, 0, NotSerialized) + { + If (LEqual (\S8EN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } + + Device (I2S0) + { + Name (_ADR, 0) + } + + Device (I2S1) + { + Name (_ADR, 1) + } +} diff --git a/src/soc/intel/skylake/acpi/cpu.asl b/src/soc/intel/skylake/acpi/cpu.asl new file mode 100644 index 0000000..2921cea --- /dev/null +++ b/src/soc/intel/skylake/acpi/cpu.asl @@ -0,0 +1,122 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* These devices are created at runtime */ +External (\_PR.CP00, DeviceObj) +External (\_PR.CP01, DeviceObj) +External (\_PR.CP02, DeviceObj) +External (\_PR.CP03, DeviceObj) +External (\_PR.CP04, DeviceObj) +External (\_PR.CP05, DeviceObj) +External (\_PR.CP06, DeviceObj) +External (\_PR.CP07, DeviceObj) + +/* Notify OS to re-read CPU tables, assuming ^2 CPU count */ +Method (PNOT) +{ + If (LGreaterEqual (\PCNT, 2)) { + Notify (\_PR.CP00, 0x81) // _CST + Notify (\_PR.CP01, 0x81) // _CST + } + If (LGreaterEqual (\PCNT, 4)) { + Notify (\_PR.CP02, 0x81) // _CST + Notify (\_PR.CP03, 0x81) // _CST + } + If (LGreaterEqual (\PCNT, 8)) { + Notify (\_PR.CP04, 0x81) // _CST + Notify (\_PR.CP05, 0x81) // _CST + Notify (\_PR.CP06, 0x81) // _CST + Notify (\_PR.CP07, 0x81) // _CST + } +} + +/* Notify OS to re-read CPU _PPC limit, assuming ^2 CPU count */ +Method (PPCN) +{ + If (LGreaterEqual (\PCNT, 2)) { + Notify (\_PR.CP00, 0x80) // _PPC + Notify (\_PR.CP01, 0x80) // _PPC + } + If (LGreaterEqual (\PCNT, 4)) { + Notify (\_PR.CP02, 0x80) // _PPC + Notify (\_PR.CP03, 0x80) // _PPC + } + If (LGreaterEqual (\PCNT, 8)) { + Notify (\_PR.CP04, 0x80) // _PPC + Notify (\_PR.CP05, 0x80) // _PPC + Notify (\_PR.CP06, 0x80) // _PPC + Notify (\_PR.CP07, 0x80) // _PPC + } +} + +/* Notify OS to re-read Throttle Limit tables, assuming ^2 CPU count */ +Method (TNOT) +{ + If (LGreaterEqual (\PCNT, 2)) { + Notify (\_PR.CP00, 0x82) // _TPC + Notify (\_PR.CP01, 0x82) // _TPC + } + If (LGreaterEqual (\PCNT, 4)) { + Notify (\_PR.CP02, 0x82) // _TPC + Notify (\_PR.CP03, 0x82) // _TPC + } + If (LGreaterEqual (\PCNT, 8)) { + Notify (\_PR.CP04, 0x82) // _TPC + Notify (\_PR.CP05, 0x82) // _TPC + Notify (\_PR.CP06, 0x82) // _TPC + Notify (\_PR.CP07, 0x82) // _TPC + } +} + +/* Return a package containing enabled processor entries */ +Method (PPKG) +{ + If (LGreaterEqual (\PCNT, 8)) { + Return (Package() + { + \_PR.CP00, + \_PR.CP01, + \_PR.CP02, + \_PR.CP03, + \_PR.CP04, + \_PR.CP05, + \_PR.CP06, + \_PR.CP07 + }) + } ElseIf (LGreaterEqual (\PCNT, 4)) { + Return (Package () + { + \_PR.CP00, + \_PR.CP01, + \_PR.CP02, + \_PR.CP03 + }) + } ElseIf (LGreaterEqual (\PCNT, 2)) { + Return (Package () + { + \_PR.CP00, + \_PR.CP01 + }) + } Else { + Return (Package () + { + \_PR.CP00 + }) + } +} diff --git a/src/soc/intel/skylake/acpi/ctdp.asl b/src/soc/intel/skylake/acpi/ctdp.asl new file mode 100644 index 0000000..a2a8fb4 --- /dev/null +++ b/src/soc/intel/skylake/acpi/ctdp.asl @@ -0,0 +1,237 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope (\_SB.PCI0.MCHC) +{ + Mutex (CTCM, 1) /* CTDP Switch Mutex (sync level 1) */ + Name (CTCC, 0) /* CTDP Current Selection */ + Name (CTCN, 0) /* CTDP Nominal Select */ + Name (CTCD, 1) /* CTDP Down Select */ + Name (CTCU, 2) /* CTDP Up Select */ + Name (SPL1, 0) /* Saved PL1 value */ + + OperationRegion (MCHB, SystemMemory, + Add (MCH_BASE_ADDRESS, 0x5000), 0x1000) + Field (MCHB, DWordAcc, Lock, Preserve) + { + Offset (0x930), /* PACKAGE_POWER_SKU */ + CTDN, 15, /* CTDP Nominal PL1 */ + Offset (0x938), /* PACKAGE_POWER_SKU_UNIT */ + PUNI, 4, /* Power Units */ + , 4, + EUNI, 5, /* Energy Units */ + , 3, + TUNI, 4, /* Time Units */ + Offset (0x958), /* PLATFORM_INFO */ + , 40, + LFM_, 8, /* Maximum Efficiency Ratio (LFM) */ + Offset (0x9a0), /* TURBO_POWER_LIMIT1 */ + PL1V, 15, /* Power Limit 1 Value */ + PL1E, 1, /* Power Limit 1 Enable */ + PL1C, 1, /* Power Limit 1 Clamp */ + PL1T, 7, /* Power Limit 1 Time */ + Offset (0x9a4), /* TURBO_POWER_LIMIT2 */ + PL2V, 15, /* Power Limit 2 Value */ + PL2E, 1, /* Power Limit 2 Enable */ + PL2C, 1, /* Power Limit 2 Clamp */ + PL2T, 7, /* Power Limit 2 Time */ + Offset (0xf3c), /* CONFIG_TDP_NOMINAL */ + TARN, 8, /* CTDP Nominal Turbo Activation Ratio */ + Offset (0xf40), /* CONFIG_TDP_LEVEL1 */ + CTDD, 15, /* CTDP Down PL1 */ + , 1, + TARD, 8, /* CTDP Down Turbo Activation Ratio */ + Offset (0xf48), /* MSR_CONFIG_TDP_LEVEL2 */ + CTDU, 15, /* CTDP Up PL1 */ + , 1, + TARU, 8, /* CTDP Up Turbo Activation Ratio */ + Offset (0xf50), /* CONFIG_TDP_CONTROL */ + CTCS, 2, /* CTDP Select */ + Offset (0xf54), /* TURBO_ACTIVATION_RATIO */ + TARS, 8, /* Turbo Activation Ratio Select */ + } + + /* + * Search CPU0 _PSS looking for control=arg0 and then + * return previous P-state entry number for new _PPC + * + * Format of _PSS: + * Name (_PSS, Package () { + * Package (6) { freq, power, tlat, blat, control, status } + * } + */ + External (\_PR.CP00._PSS) + Method (PSSS, 1, NotSerialized) + { + Store (One, Local0) /* Start at P1 */ + Store (SizeOf (\_PR.CP00._PSS), Local1) + + While (LLess (Local0, Local1)) { + /* Store _PSS entry Control value to Local2 */ + ShiftRight (DeRefOf (Index (DeRefOf (Index + (\_PR.CP00._PSS, Local0)), 4)), 8, Local2) + If (LEqual (Local2, Arg0)) { + Return (Subtract (Local0, 1)) + } + Increment (Local0) + } + + Return (0) + } + + /* Calculate PL2 based on chip type */ + Method (CPL2, 1, NotSerialized) + { + /* Haswell ULT PL2 = 25W */ + /* FIXME: update for broadwell */ + Return (Multiply (25, 8)) + } + + /* Set Config TDP Down */ + Method (STND, 0, Serialized) + { + If (Acquire (CTCM, 100)) { + Return (0) + } + If (LEqual (CTCD, CTCC)) { + Release (CTCM) + Return (0) + } + + Store ("Set TDP Down", Debug) + + /* Set CTC */ + Store (CTCD, CTCS) + + /* Set TAR */ + Store (TARD, TARS) + + /* Set PPC limit and notify OS */ + Store (PSSS (TARD), PPCM) + PPCN () + + /* Set PL2 */ + Store (CPL2 (CTDD), PL2V) + + /* Set PL1 */ + Store (CTDD, PL1V) + + /* Store the new TDP Down setting */ + Store (CTCD, CTCC) + + Release (CTCM) + Return (1) + } + + /* Set Config TDP Nominal from Down */ + Method (STDN, 0, Serialized) + { + If (Acquire (CTCM, 100)) { + Return (0) + } + If (LEqual (CTCN, CTCC)) { + Release (CTCM) + Return (0) + } + + Store ("Set TDP Nominal", Debug) + + /* Set PL1 */ + Store (CTDN, PL1V) + + /* Set PL2 */ + Store (CPL2 (CTDN), PL2V) + + /* Set PPC limit and notify OS */ + Store (PSSS (TARN), PPCM) + PPCN () + + /* Set TAR */ + Store (TARN, TARS) + + /* Set CTC */ + Store (CTCN, CTCS) + + /* Store the new TDP Nominal setting */ + Store (CTCN, CTCC) + + Release (CTCM) + Return (1) + } + + /* Calculate PL1 value based on requested TDP */ + Method (TDPP, 1, NotSerialized) + { + Return (Multiply (ShiftLeft (Subtract (PUNI, 1), 2), Arg0)) + } + + /* Enable Controllable TDP to limit PL1 to requested value */ + Method (CTLE, 1, Serialized) + { + If (Acquire (CTCM, 100)) { + Return (0) + } + + Store ("Enable PL1 Limit", Debug) + + /* Set _PPC to LFM */ + Store (PSSS (LFM_), Local0) + Add (Local0, 1, PPCM) + \PPCN () + + /* Set TAR to LFM-1 */ + Subtract (LFM_, 1, TARS) + + /* Set PL1 to desired value */ + Store (PL1V, SPL1) + Store (TDPP (Arg0), PL1V) + + /* Set PL1 CLAMP bit */ + Store (One, PL1C) + + Release (CTCM) + Return (1) + } + + /* Disable Controllable TDP */ + Method (CTLD, 0, Serialized) + { + If (Acquire (CTCM, 100)) { + Return (0) + } + + Store ("Disable PL1 Limit", Debug) + + /* Clear PL1 CLAMP bit */ + Store (Zero, PL1C) + + /* Set PL1 to normal value */ + Store (SPL1, PL1V) + + /* Set TAR to 0 */ + Store (Zero, TARS) + + /* Set _PPC to 0 */ + Store (Zero, PPCM) + \PPCN () + + Release (CTCM) + Return (1) + } +} diff --git a/src/soc/intel/skylake/acpi/device_nvs.asl b/src/soc/intel/skylake/acpi/device_nvs.asl new file mode 100644 index 0000000..1d2aa78 --- /dev/null +++ b/src/soc/intel/skylake/acpi/device_nvs.asl @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Device Enabled in ACPI Mode */ + +S0EN, 8, // DMA Enable +S1EN, 8, // I2C0 Enable +S2EN, 8, // I2C1 Enable +S3EN, 8, // SPI0 Enable +S4EN, 8, // SPI1 Enable +S5EN, 8, // UART0 Enable +S6EN, 8, // UART1 Enable +S7EN, 8, // SDIO Enable +S8EN, 8, // ADSP Enable + +/* BAR 0 */ + +S0B0, 32, // DMA BAR0 +S1B0, 32, // I2C0 BAR0 +S2B0, 32, // I2C1 BAR0 +S3B0, 32, // SPI0 BAR0 +S4B0, 32, // SPI1 BAR0 +S5B0, 32, // UART0 BAR0 +S6B0, 32, // UART1 BAR0 +S7B0, 32, // SDIO BAR0 +S8B0, 32, // ADSP BAR0 + +/* BAR 1 */ + +S0B1, 32, // DMA BAR1 +S1B1, 32, // I2C0 BAR1 +S2B1, 32, // I2C1 BAR1 +S3B1, 32, // SPI0 BAR1 +S4B1, 32, // SPI1 BAR1 +S5B1, 32, // UART0 BAR1 +S6B1, 32, // UART1 BAR1 +S7B1, 32, // SDIO BAR1 +S8B1, 32, // ADSP BAR1 diff --git a/src/soc/intel/skylake/acpi/ehci.asl b/src/soc/intel/skylake/acpi/ehci.asl new file mode 100644 index 0000000..a2e704f --- /dev/null +++ b/src/soc/intel/skylake/acpi/ehci.asl @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// EHCI Controller 0:1d.0 + +Device (EHCI) +{ + Name(_ADR, 0x001d0000) + Name (_PRW, Package(){ 0x6d, 3 }) + + // Leave USB ports on for to allow Wake from USB + + Method(_S3D,0) // Highest D State in S3 State + { + Return (2) + } + + Method(_S4D,0) // Highest D State in S4 State + { + Return (2) + } + + Device (HUB7) + { + Name (_ADR, 0x00000000) + + // How many are there? + Device (PRT1) { Name (_ADR, 1) } // USB Port 0 + Device (PRT2) { Name (_ADR, 2) } // USB Port 1 + Device (PRT3) { Name (_ADR, 3) } // USB Port 2 + Device (PRT4) { Name (_ADR, 4) } // USB Port 3 + Device (PRT5) { Name (_ADR, 5) } // USB Port 4 + Device (PRT6) { Name (_ADR, 6) } // USB Port 5 + } +} diff --git a/src/soc/intel/skylake/acpi/globalnvs.asl b/src/soc/intel/skylake/acpi/globalnvs.asl new file mode 100644 index 0000000..223d21a --- /dev/null +++ b/src/soc/intel/skylake/acpi/globalnvs.asl @@ -0,0 +1,109 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Global Variables */ + +Name (\PICM, 0) // IOAPIC/8259 + +/* + * Global ACPI memory region. This region is used for passing information + * between coreboot (aka "the system bios"), ACPI, and the SMI handler. + * Since we don't know where this will end up in memory at ACPI compile time, + * we have to fix it up in coreboot's ACPI creation phase. + */ + +External(NVSA) +OperationRegion (GNVS, SystemMemory, NVSA, 0x2000) +Field (GNVS, ByteAcc, NoLock, Preserve) +{ + /* Miscellaneous */ + Offset (0x00), + OSYS, 16, // 0x00 - Operating System + SMIF, 8, // 0x02 - SMI function + PRM0, 8, // 0x03 - SMI function parameter + PRM1, 8, // 0x04 - SMI function parameter + SCIF, 8, // 0x05 - SCI function + PRM2, 8, // 0x06 - SCI function parameter + PRM3, 8, // 0x07 - SCI function parameter + LCKF, 8, // 0x08 - Global Lock function for EC + PRM4, 8, // 0x09 - Lock function parameter + PRM5, 8, // 0x0a - Lock function parameter + PCNT, 8, // 0x0b - Processor Count + PPCM, 8, // 0x0c - Max PPC State + TMPS, 8, // 0x0d - Temperature Sensor ID + TLVL, 8, // 0x0e - Throttle Level Limit + FLVL, 8, // 0x0f - Current FAN Level + TCRT, 8, // 0x10 - Critical Threshold + TPSV, 8, // 0x11 - Passive Threshold + TMAX, 8, // 0x12 - CPU Tj_max + S5U0, 8, // 0x13 - Enable USB in S5 + S3U0, 8, // 0x14 - Enable USB in S3 + S33G, 8, // 0x15 - Enable 3G in S3 + LIDS, 8, // 0x16 - LID State + PWRS, 8, // 0x17 - AC Power State + CMEM, 32, // 0x18 - 0x1b - CBMEM TOC + CBMC, 32, // 0x1c - 0x1f - Coreboot Memory Console + PM1I, 64, // 0x20 - 0x27 - PM1 wake status bit + GPEI, 64, // 0x28 - 0x2f - GPE wake status bit + + /* ChromeOS specific */ + Offset (0x100), + #include <vendorcode/google/chromeos/acpi/gnvs.asl> + + /* Device specific */ + Offset (0x1000), + #include "device_nvs.asl" +} + +/* Set flag to enable USB charging in S3 */ +Method (S3UE) +{ + Store (One, \S3U0) +} + +/* Set flag to disable USB charging in S3 */ +Method (S3UD) +{ + Store (Zero, \S3U0) +} + +/* Set flag to enable USB charging in S5 */ +Method (S5UE) +{ + Store (One, \S5U0) +} + +/* Set flag to disable USB charging in S5 */ +Method (S5UD) +{ + Store (Zero, \S5U0) +} + +/* Set flag to enable 3G module in S3 */ +Method (S3GE) +{ + Store (One, \S33G) +} + +/* Set flag to disable 3G module in S3 */ +Method (S3GD) +{ + Store (Zero, \S33G) +} diff --git a/src/soc/intel/skylake/acpi/gpio.asl b/src/soc/intel/skylake/acpi/gpio.asl new file mode 100644 index 0000000..c6d8753 --- /dev/null +++ b/src/soc/intel/skylake/acpi/gpio.asl @@ -0,0 +1,142 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Device (GPIO) +{ + // GPIO Controller + Method (_HID) + { + If (\ISWP ()) { + // WildcatPoint + Return ("INT3437") + } + + // LynxPoint-LP + Return ("INT33C7") + } + Name (_UID, 1) + + Name (RBUF, ResourceTemplate() + { + DWordIo (ResourceProducer, + MinFixed, // IsMinFixed + MaxFixed, // IsMaxFixed + PosDecode, // Decode + EntireRange, // ISARanges + 0x00000000, // AddressGranularity + 0x00000000, // AddressMinimum + 0x00000000, // AddressMaximum + 0x00000000, // AddressTranslation + 0x00000000, // RangeLength + , // ResourceSourceIndex + , // ResourceSource + BAR0) + // Disabled due to IRQ storm: http://crosbug.com/p/29548 + //Interrupt (ResourceConsumer, + // Level, ActiveHigh, Shared, , , ) {14} + }) + + Method (_CRS, 0, NotSerialized) + { + CreateDwordField (^RBUF, ^BAR0._MIN, BMIN) + CreateDwordField (^RBUF, ^BAR0._MAX, BMAX) + CreateDwordField (^RBUF, ^BAR0._LEN, BLEN) + + Store (GPIO_BASE_SIZE, BLEN) + Store (GPIO_BASE_ADDRESS, BMIN) + Store (Subtract (Add (GPIO_BASE_ADDRESS, + GPIO_BASE_SIZE), 1), BMAX) + + Return (RBUF) + } + + Method (_STA, 0, NotSerialized) + { + Return (0xF) + } + + // GWAK: Setup GPIO as ACPI GPE for Wake + // Arg0: GPIO Number + Method (GWAK, 1, NotSerialized) + { + // Local0 = GPIO Base Address + Store (And (GPBS, Not(0x1)), Local0) + + // Local1 = BANK, Local2 = OFFSET + Divide (Arg0, 32, Local2, Local1) + + // + // Set OWNER to ACPI + // + + // Local3 = GPIOBASE + GPIO_OWN(BANK) + Store (Add (Local0, Multiply (Local1, 0x4)), Local3) + + // GPIO_OWN(BANK) + OperationRegion (IOWN, SystemIO, Local3, 4) + Field (IOWN, AnyAcc, NoLock, Preserve) { + GOWN, 32, + } + + // GPIO_OWN[GPIO] = 0 (ACPI) + Store (And (GOWN, Not (ShiftLeft (0x1, Local2))), GOWN) + + // + // Set ROUTE to SCI + // + + // Local3 = GPIOBASE + GPIO_ROUTE(BANK) + Store (Add (Add (Local0, 0x30), Multiply (Local1, 0x4)), Local3) + + // GPIO_ROUTE(BANK) + OperationRegion (IROU, SystemIO, Local3, 4) + Field (IROU, AnyAcc, NoLock, Preserve) { + GROU, 32, + } + + // GPIO_ROUTE[GPIO] = 0 (SCI) + Store (And (GROU, Not (ShiftLeft (0x1, Local2))), GROU) + + // + // Set GPnCONFIG to GPIO|INPUT|INVERT + // + + // Local3 = GPIOBASE + GPnCONFIG0(GPIO) + Store (Add (Add (Local0, 0x100), Multiply (Arg0, 0x8)), Local3) + + // GPnCONFIG(GPIO) + OperationRegion (GPNC, SystemIO, Local3, 8) + Field (GPNC, AnyAcc, NoLock, Preserve) { + GMOD, 1, // MODE: 0=NATIVE 1=GPIO + , 1, + GIOS, 1, // IO_SEL: 0=OUTPUT 1=INPUT + GINV, 1, // INVERT: 0=NORMAL 1=INVERT + GLES, 1, // LxEB: 0=EDGE 1=LEVEL + , 24, + ILVL, 1, // INPUT: 0=LOW 1=HIGH + OLVL, 1, // OUTPUT: 0=LOW 1=HIGH + GPWP, 2, // PULLUP: 00=NONE 01=DOWN 10=UP 11=INVALID + ISEN, 1, // SENSE: 0=ENABLE 1=DISABLE + } + + Store (0x1, GMOD) // GPIO + Store (0x1, GIOS) // INPUT + Store (0x1, GINV) // INVERT + } +} diff --git a/src/soc/intel/skylake/acpi/hda.asl b/src/soc/intel/skylake/acpi/hda.asl new file mode 100644 index 0000000..2173661 --- /dev/null +++ b/src/soc/intel/skylake/acpi/hda.asl @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Intel PCH HDA */ + +// Intel High Definition Audio (Azalia) 0:1b.0 + +Device (HDEF) +{ + Name (_ADR, 0x001b0000) + Name (_PRW, Package () { 0x6d, 3 }) +} diff --git a/src/soc/intel/skylake/acpi/irqlinks.asl b/src/soc/intel/skylake/acpi/irqlinks.asl new file mode 100644 index 0000000..ba550e2 --- /dev/null +++ b/src/soc/intel/skylake/acpi/irqlinks.asl @@ -0,0 +1,492 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Device (LNKA) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 1) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTA) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) + { 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLA, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateWordField (RTLA, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTA + ShiftLeft (1, And (PRTA, 0x0f), IRQ0) + + Return (RTLA) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField (Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit (IRQ0, Local0) + + Decrement(Local0) + Store (Local0, PRTA) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And (PRTA, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKB) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 2) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTB) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) + { 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLB, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateWordField (RTLB, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTB + ShiftLeft (1, And (PRTB, 0x0f), IRQ0) + + Return (RTLB) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField (Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit (IRQ0, Local0) + + Decrement(Local0) + Store (Local0, PRTB) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And (PRTB, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKC) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 3) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTC) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) + { 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLC, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateWordField (RTLC, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTC + ShiftLeft (1, And (PRTC, 0x0f), IRQ0) + + Return (RTLC) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField (Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit (IRQ0, Local0) + + Decrement(Local0) + Store (Local0, PRTC) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And (PRTC, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKD) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 4) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTD) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) + { 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLD, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateWordField (RTLD, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTD + ShiftLeft (1, And (PRTD, 0x0f), IRQ0) + + Return (RTLD) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField (Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit (IRQ0, Local0) + + Decrement(Local0) + Store (Local0, PRTD) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And (PRTD, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKE) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 5) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTE) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) + { 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLE, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateWordField (RTLE, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTE + ShiftLeft (1, And (PRTE, 0x0f), IRQ0) + + Return (RTLE) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField (Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit (IRQ0, Local0) + + Decrement(Local0) + Store (Local0, PRTE) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And (PRTE, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKF) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 6) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTF) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) + { 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLF, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateWordField (RTLF, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTF + ShiftLeft (1, And (PRTF, 0x0f), IRQ0) + + Return (RTLF) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField (Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit (IRQ0, Local0) + + Decrement(Local0) + Store (Local0, PRTF) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And (PRTF, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKG) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 7) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTG) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) + { 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLG, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateWordField (RTLG, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTG + ShiftLeft (1, And (PRTG, 0x0f), IRQ0) + + Return (RTLG) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField (Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit (IRQ0, Local0) + + Decrement(Local0) + Store (Local0, PRTG) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And (PRTG, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKH) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 8) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTH) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) + { 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLH, ResourceTemplate() + { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateWordField (RTLH, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTH + ShiftLeft (1, And (PRTH, 0x0f), IRQ0) + + Return (RTLH) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField (Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit (IRQ0, Local0) + + Decrement(Local0) + Store (Local0, PRTH) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And (PRTH, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + diff --git a/src/soc/intel/skylake/acpi/lpc.asl b/src/soc/intel/skylake/acpi/lpc.asl new file mode 100644 index 0000000..2b574f7 --- /dev/null +++ b/src/soc/intel/skylake/acpi/lpc.asl @@ -0,0 +1,208 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Intel LPC Bus Device - 0:1f.0 + +Device (LPCB) +{ + Name (_ADR, 0x001f0000) + + OperationRegion(LPC0, PCI_Config, 0x00, 0x100) + Field (LPC0, AnyAcc, NoLock, Preserve) + { + Offset (0x02), + PDID, 16, // Device ID + Offset (0x40), + PMBS, 16, // PMBASE + Offset (0x48), + GPBS, 16, // GPIOBASE + Offset (0x60), // Interrupt Routing Registers + PRTA, 8, + PRTB, 8, + PRTC, 8, + PRTD, 8, + Offset (0x68), + PRTE, 8, + PRTF, 8, + PRTG, 8, + PRTH, 8, + + Offset (0x80), // IO Decode Ranges + IOD0, 8, + IOD1, 8, + } + + Device (DMAC) // DMA Controller + { + Name (_HID, EISAID("PNP0200")) + Name (_CRS, ResourceTemplate() + { + IO (Decode16, 0x00, 0x00, 0x01, 0x20) + IO (Decode16, 0x81, 0x81, 0x01, 0x11) + IO (Decode16, 0x93, 0x93, 0x01, 0x0d) + IO (Decode16, 0xc0, 0xc0, 0x01, 0x20) + DMA (Compatibility, NotBusMaster, Transfer8_16) { 4 } + }) + } + + Device (FWH) // Firmware Hub + { + Name (_HID, EISAID("INT0800")) + Name (_CRS, ResourceTemplate() + { + Memory32Fixed(ReadOnly, 0xff000000, 0x01000000) + }) + } + + Device (HPET) + { + Name (_HID, EISAID("PNP0103")) + Name (_CID, 0x010CD041) + + Name (BUF0, ResourceTemplate() + { + Memory32Fixed(ReadOnly, 0xfed00000, 0x400, FED0) + }) + + Method (_STA, 0) // Device Status + { + If (HPTE) { + // Note: Ancient versions of Windows don't want + // to see the HPET in order to work right + If (LGreaterEqual(OSYS, 2001)) { + Return (0xf) // Enable and show device + } Else { + Return (0xb) // Enable and don't show device + } + } + + Return (0x0) // Not enabled, don't show. + } + + Method (_CRS, 0, Serialized) // Current resources + { + If (HPTE) { + CreateDWordField (BUF0, + \_SB.PCI0.LPCB.HPET.FED0._BAS, HPT0) + + If (Lequal(HPAS, 1)) { + Store(0xfed01000, HPT0) + } + + If (Lequal(HPAS, 2)) { + Store(0xfed02000, HPT0) + } + + If (Lequal(HPAS, 3)) { + Store(0xfed03000, HPT0) + } + } + + Return (BUF0) + } + } + + Device(PIC) // 8259 Interrupt Controller + { + Name (_HID,EISAID("PNP0000")) + Name (_CRS, ResourceTemplate() + { + IO (Decode16, 0x20, 0x20, 0x01, 0x02) + IO (Decode16, 0x24, 0x24, 0x01, 0x02) + IO (Decode16, 0x28, 0x28, 0x01, 0x02) + IO (Decode16, 0x2c, 0x2c, 0x01, 0x02) + IO (Decode16, 0x30, 0x30, 0x01, 0x02) + IO (Decode16, 0x34, 0x34, 0x01, 0x02) + IO (Decode16, 0x38, 0x38, 0x01, 0x02) + IO (Decode16, 0x3c, 0x3c, 0x01, 0x02) + IO (Decode16, 0xa0, 0xa0, 0x01, 0x02) + IO (Decode16, 0xa4, 0xa4, 0x01, 0x02) + IO (Decode16, 0xa8, 0xa8, 0x01, 0x02) + IO (Decode16, 0xac, 0xac, 0x01, 0x02) + IO (Decode16, 0xb0, 0xb0, 0x01, 0x02) + IO (Decode16, 0xb4, 0xb4, 0x01, 0x02) + IO (Decode16, 0xb8, 0xb8, 0x01, 0x02) + IO (Decode16, 0xbc, 0xbc, 0x01, 0x02) + IO (Decode16, 0x4d0, 0x4d0, 0x01, 0x02) + IRQNoFlags () { 2 } + }) + } + + Device(MATH) // FPU + { + Name (_HID, EISAID("PNP0C04")) + Name (_CRS, ResourceTemplate() + { + IO (Decode16, 0xf0, 0xf0, 0x01, 0x01) + IRQNoFlags() { 13 } + }) + } + + Device(LDRC) // LPC device: Resource consumption + { + Name (_HID, EISAID("PNP0C02")) + Name (_UID, 2) + + Name (RBUF, ResourceTemplate() + { + IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO + IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO + IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status + IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post + IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI + IO (Decode16, ACPI_BASE_ADDRESS, ACPI_BASE_ADDRESS, + 0x1, 0xff) + }) + + Method (_CRS, 0, NotSerialized) + { + Return (RBUF) + } + } + + Device (RTC) // Real Time Clock + { + Name (_HID, EISAID("PNP0B00")) + Name (_CRS, ResourceTemplate() + { + IO (Decode16, 0x70, 0x70, 1, 8) + //IRQNoFlags() { 8 } + }) + } + + Device (TIMR) // Intel 8254 timer + { + Name (_HID, EISAID("PNP0100")) + Name (_CRS, ResourceTemplate() { + IO (Decode16, 0x40, 0x40, 0x01, 0x04) + IO (Decode16, 0x50, 0x50, 0x10, 0x04) + IRQNoFlags() {0} + }) + } + + #include "gpio.asl" + #include "irqlinks.asl" + #include <acpi/ec.asl> + #include <acpi/superio.asl> +} diff --git a/src/soc/intel/skylake/acpi/pch.asl b/src/soc/intel/skylake/acpi/pch.asl new file mode 100644 index 0000000..998133d --- /dev/null +++ b/src/soc/intel/skylake/acpi/pch.asl @@ -0,0 +1,101 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <soc/iomap.h> + +Scope (\) +{ + // IO-Trap at 0x800. This is the ACPI->SMI communication interface. + OperationRegion (IO_T, SystemIO, 0x800, 0x10) + Field (IO_T, ByteAcc, NoLock, Preserve) + { + Offset (0x8), + TRP0, 8 // IO-Trap at 0x808 + } + + // Root Complex Register Block + OperationRegion (RCRB, SystemMemory, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE) + Field (RCRB, DWordAcc, Lock, Preserve) + { + Offset (0x3404), // High Performance Timer Configuration + HPAS, 2, // Address Select + , 5, + HPTE, 1, // Address Enable + } + + /* + * Check PCH type + * Return 1 if PCH is WildcatPoint + * Return 0 if PCH is LynxPoint + */ + Method (ISWP) + { + And (\_SB.PCI0.LPCB.PDID, 0xfff0, Local0) + If (LEqual (Local0, 0x9cc0)) { + Return (1) + } Else { + Return (0) + } + } +} + +// High Definition Audio (Azalia) 0:1b.0 +#include "hda.asl" + +// ADSP/SST 0:13.0 +#include "adsp.asl" + +// PCI Express Ports 0:1c.x +#include "pcie.asl" + +// USB EHCI 0:1d.0 +#include "ehci.asl" + +// USB XHCI 0:14.0 +#include "xhci.asl" + +// LPC Bridge 0:1f.0 +#include "lpc.asl" + +// SATA 0:1f.2 +#include "sata.asl" + +// SMBus 0:1f.3 +#include "smbus.asl" + +// Serial IO +#include "serialio.asl" + +Method (_OSC, 4) +{ + /* Check for proper GUID */ + If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) + { + /* Let OS control everything */ + Return (Arg3) + } + Else + { + /* Unrecognized UUID */ + CreateDWordField (Arg3, 0, CDW1) + Or (CDW1, 4, CDW1) + Return (Arg3) + } +} diff --git a/src/soc/intel/skylake/acpi/pci_irqs.asl b/src/soc/intel/skylake/acpi/pci_irqs.asl new file mode 100644 index 0000000..0c23e10 --- /dev/null +++ b/src/soc/intel/skylake/acpi/pci_irqs.asl @@ -0,0 +1,89 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // Mini-HD Audio 0:3.0 + Package() { 0x0003ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 16 }, + Package() { 0x001cffff, 1, 0, 17 }, + Package() { 0x001cffff, 2, 0, 18 }, + Package() { 0x001cffff, 3, 0, 19 }, + // EHCI 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // Audio DSP (Smart Sound) 0:13.0 + Package() { 0x0013ffff, 0, 0, 23 }, + // XHCI 0:14.0 + Package() { 0x0014ffff, 0, 0, 18 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 22 }, + Package() { 0x001fffff, 1, 0, 18 }, + Package() { 0x001fffff, 2, 0, 17 }, + Package() { 0x001fffff, 3, 0, 16 }, + // Serial IO 0:15.0 + Package() { 0x0015ffff, 0, 0, 20 }, + Package() { 0x0015ffff, 1, 0, 21 }, + Package() { 0x0015ffff, 2, 0, 21 }, + Package() { 0x0015ffff, 3, 0, 21 }, + // SDIO 0:17.0 + Package() { 0x0017ffff, 0, 0, 23 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // Mini-HD Audio 0:3.0 + Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, + // EHCI 0:1d.0 + Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + // Audio DSP (Smart Sound) 0:13.0 + Package() { 0x0013ffff, 0, \_SB.PCI0.LPCB.LNKH, 0 }, + // XHCI 0:14.0 + Package() { 0x0014ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }, + // Serial IO 0:15.0 + Package() { 0x0015ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, + Package() { 0x0015ffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x0015ffff, 2, \_SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x0015ffff, 3, \_SB.PCI0.LPCB.LNKF, 0 }, + // SDIO 0:17.0 + Package() { 0x0017ffff, 0, \_SB.PCI0.LPCB.LNKH, 0 }, + }) + } +} + diff --git a/src/soc/intel/skylake/acpi/pcie.asl b/src/soc/intel/skylake/acpi/pcie.asl new file mode 100644 index 0000000..a48bdde --- /dev/null +++ b/src/soc/intel/skylake/acpi/pcie.asl @@ -0,0 +1,214 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Intel PCH PCIe support */ + +Method (IRQM, 1, Serialized) { + + /* Interrupt Map INTA->INTA, INTB->INTB, INTC->INTC, INTD->INTD */ + Name (IQAA, Package() { + Package() { 0x0000ffff, 0, 0, 16 }, + Package() { 0x0000ffff, 1, 0, 17 }, + Package() { 0x0000ffff, 2, 0, 18 }, + Package() { 0x0000ffff, 3, 0, 19 } }) + Name (IQAP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 } }) + + /* Interrupt Map INTA->INTB, INTB->INTC, INTC->INTD, INTD->INTA */ + Name (IQBA, Package() { + Package() { 0x0000ffff, 0, 0, 17 }, + Package() { 0x0000ffff, 1, 0, 18 }, + Package() { 0x0000ffff, 2, 0, 19 }, + Package() { 0x0000ffff, 3, 0, 16 } }) + Name (IQBP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 } }) + + /* Interrupt Map INTA->INTC, INTB->INTD, INTC->INTA, INTD->INTB */ + Name (IQCA, Package() { + Package() { 0x0000ffff, 0, 0, 18 }, + Package() { 0x0000ffff, 1, 0, 19 }, + Package() { 0x0000ffff, 2, 0, 16 }, + Package() { 0x0000ffff, 3, 0, 17 } }) + Name (IQCP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKB, 0 } }) + + /* Interrupt Map INTA->INTD, INTB->INTA, INTC->INTB, INTD->INTC */ + Name (IQDA, Package() { + Package() { 0x0000ffff, 0, 0, 19 }, + Package() { 0x0000ffff, 1, 0, 16 }, + Package() { 0x0000ffff, 2, 0, 17 }, + Package() { 0x0000ffff, 3, 0, 18 } }) + Name (IQDP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKC, 0 } }) + + Switch (ToInteger (Arg0)) { + /* PCIe Root Port 1 and 5 */ + Case (Package() { 1, 5 }) { + If (PICM) { + Return (IQAA) + } Else { + Return (IQAP) + } + } + + /* PCIe Root Port 2 and 6 */ + Case (Package() { 2, 6 }) { + If (PICM) { + Return (IQBA) + } Else { + Return (IQBP) + } + } + + /* PCIe Root Port 3 and 7 */ + Case (Package() { 3, 7 }) { + If (PICM) { + Return (IQCA) + } Else { + Return (IQCP) + } + } + + /* PCIe Root Port 4 and 8 */ + Case (Package() { 4, 8 }) { + If (PICM) { + Return (IQDA) + } Else { + Return (IQDP) + } + } + + Default { + If (PICM) { + Return (IQDA) + } Else { + Return (IQDP) + } + } + } +} + +Device (RP01) +{ + Name (_ADR, 0x001c0000) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP02) +{ + Name (_ADR, 0x001c0001) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP03) +{ + Name (_ADR, 0x001c0002) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP04) +{ + Name (_ADR, 0x001c0003) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP05) +{ + Name (_ADR, 0x001c0004) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP06) +{ + Name (_ADR, 0x001c0005) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP07) +{ + Name (_ADR, 0x001c0006) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP08) +{ + Name (_ADR, 0x001c0007) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} diff --git a/src/soc/intel/skylake/acpi/pcie_port.asl b/src/soc/intel/skylake/acpi/pcie_port.asl new file mode 100644 index 0000000..3226746 --- /dev/null +++ b/src/soc/intel/skylake/acpi/pcie_port.asl @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Included in each PCIe Root Port device */ + +OperationRegion (RPCS, PCI_Config, 0x00, 0xFF) +Field (RPCS, AnyAcc, NoLock, Preserve) +{ + Offset (0x4c), // Link Capabilities + , 24, + RPPN, 8, // Root Port Number +} diff --git a/src/soc/intel/skylake/acpi/platform.asl b/src/soc/intel/skylake/acpi/platform.asl new file mode 100644 index 0000000..f63168a --- /dev/null +++ b/src/soc/intel/skylake/acpi/platform.asl @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method (TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method (_PIC, 1) +{ + /* Remember the OS' IRQ routing choice. */ + Store (Arg0, PICM) +} + +/* + * The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method (_PTS, 1) +{ +} + +/* The _WAK method is called on system wakeup */ + +Method (_WAK, 1) +{ + Return (Package (){ 0, 0 }) +} + +Scope (\_SB) +{ + Method (_SWS) + { + /* Index into PM1 for device that caused wake */ + Return (\PM1I) + } +} + +Scope (\_GPE) +{ + Method (_SWS) + { + /* Index into GPE for device that caused wake */ + Return (\GPEI) + } +} diff --git a/src/soc/intel/skylake/acpi/sata.asl b/src/soc/intel/skylake/acpi/sata.asl new file mode 100644 index 0000000..0af2a3f --- /dev/null +++ b/src/soc/intel/skylake/acpi/sata.asl @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Intel SATA Controller 0:1f.2 +Device (SATA) +{ + Name (_ADR, 0x001f0002) +} diff --git a/src/soc/intel/skylake/acpi/serialio.asl b/src/soc/intel/skylake/acpi/serialio.asl new file mode 100644 index 0000000..7ffc671 --- /dev/null +++ b/src/soc/intel/skylake/acpi/serialio.asl @@ -0,0 +1,627 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Intel Serial IO Devices in ACPI Mode + +// Serial IO Device BAR0 and BAR1 is 4KB +#define SIO_BAR_LEN 0x1000 + +// Put SerialIO device in D0 state +// Arg0 - BAR1 of device +// Arg1 - Set if device is in ACPI mode +Method (LPD0, 2, Serialized) +{ + // PCI mode devices will be handled by OS PCI bus driver + If (LEqual (Arg1, 0)) { + Return + } + + OperationRegion (SPRT, SystemMemory, Add (Arg0, 0x84), 4) + Field (SPRT, DWordAcc, NoLock, Preserve) + { + SPCS, 32 + } + + And (SPCS, 0xFFFFFFFC, SPCS) + Store (SPCS, Local0) // Read back after writing +} + +// Put SerialIO device in D3 state +// Arg0 - BAR1 of device +// Arg1 - Set if device is in ACPI mode +Method (LPD3, 2, Serialized) +{ + // PCI mode devices will be handled by OS PCI bus driver + If (LEqual (Arg1, 0)) { + Return + } + + OperationRegion (SPRT, SystemMemory, Add (Arg0, 0x84), 4) + Field (SPRT, DWordAcc, NoLock, Preserve) + { + SPCS, 32 + } + + Or (SPCS, 0x3, SPCS) + Store (SPCS, Local0) // Read back after writing +} + +// Serial IO Resource Consumption for BAR1 +Device (SIOR) +{ + Name (_HID, EISAID("PNP0C02")) + Name (_UID, 4) + + Name (RBUF, ResourceTemplate() + { + // Serial IO BAR1 (PCI config space) resources + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D0) // SDMA + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D1) // I2C0 + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D2) // I2C1 + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D3) // SPI0 + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D4) // SPI1 + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D5) // UART0 + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D6) // UART1 + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, B1D7) // SDIO + }) + + // Update BAR1 address and length if set in NVS + Method (_CRS, 0, NotSerialized) + { + // SDMA + If (LNotEqual (\S0B1, Zero)) { + CreateDwordField (^RBUF, ^B1D0._BAS, B0AD) + CreateDwordField (^RBUF, ^B1D0._LEN, B0LN) + Store (\S0B1, B0AD) + Store (SIO_BAR_LEN, B0LN) + } + + // I2C0 + If (LNotEqual (\S1B1, Zero)) { + CreateDwordField (^RBUF, ^B1D1._BAS, B1AD) + CreateDwordField (^RBUF, ^B1D1._LEN, B1LN) + Store (\S1B1, B1AD) + Store (SIO_BAR_LEN, B1LN) + } + + // I2C1 + If (LNotEqual (\S2B1, Zero)) { + CreateDwordField (^RBUF, ^B1D2._BAS, B2AD) + CreateDwordField (^RBUF, ^B1D2._LEN, B2LN) + Store (\S2B1, B2AD) + Store (SIO_BAR_LEN, B2LN) + } + + // SPI0 + If (LNotEqual (\S3B1, Zero)) { + CreateDwordField (^RBUF, ^B1D3._BAS, B3AD) + CreateDwordField (^RBUF, ^B1D3._LEN, B3LN) + Store (\S3B1, B3AD) + Store (SIO_BAR_LEN, B3LN) + } + + // SPI1 + If (LNotEqual (\S4B1, Zero)) { + CreateDwordField (^RBUF, ^B1D4._BAS, B4AD) + CreateDwordField (^RBUF, ^B1D4._LEN, B4LN) + Store (\S4B1, B4AD) + Store (SIO_BAR_LEN, B4LN) + } + + // UART0 + If (LNotEqual (\S5B1, Zero)) { + CreateDwordField (^RBUF, ^B1D5._BAS, B5AD) + CreateDwordField (^RBUF, ^B1D5._LEN, B5LN) + Store (\S5B1, B5AD) + Store (SIO_BAR_LEN, B5LN) + } + + // UART1 + If (LNotEqual (\S6B1, Zero)) { + CreateDwordField (^RBUF, ^B1D6._BAS, B6AD) + CreateDwordField (^RBUF, ^B1D6._LEN, B6LN) + Store (\S6B1, B6AD) + Store (SIO_BAR_LEN, B6LN) + } + + // SDIO + If (LNotEqual (\S7B1, Zero)) { + CreateDwordField (^RBUF, ^B1D7._BAS, B7AD) + CreateDwordField (^RBUF, ^B1D7._LEN, B7LN) + Store (\S7B1, B7AD) + Store (SIO_BAR_LEN, B7LN) + } + + Return (RBUF) + } +} + +Device (SDMA) +{ + // Serial IO DMA Controller + Name (_HID, "INTL9C60") + Name (_UID, 1) + Name (_ADR, 0x00150000) + + // BAR0 is assigned during PCI enumeration and saved into NVS + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7} + }) + + Method (_CRS, 0, NotSerialized) + { + // Update BAR0 address and length if set in NVS + If (LNotEqual (\S0B0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (\S0B0, B0AD) + Store (SIO_BAR_LEN, B0LN) + } + + Return (RBUF) + } + + Method (_STA, 0, NotSerialized) + { + If (LEqual (\S0EN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } +} + +Device (I2C0) +{ + // Serial IO I2C0 Controller + Method (_HID) + { + If (\ISWP ()) { + // WildcatPoint + Return ("INT3432") + } + + // LynxPoint-LP + Return ("INT33C2") + } + Name (_UID, 1) + Name (_ADR, 0x00150001) + + Name (SSCN, Package () { 432, 507, 30 }) + Name (FMCN, Package () { 72, 160, 30 }) + + // BAR0 is assigned during PCI enumeration and saved into NVS + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7} + }) + + // DMA channels are only used if Serial IO DMA controller is enabled + Name (DBUF, ResourceTemplate () + { + FixedDMA (0x18, 4, Width32Bit, DMA1) // Tx + FixedDMA (0x19, 5, Width32Bit, DMA2) // Rx + }) + + Method (_CRS, 0, NotSerialized) + { + // Update BAR0 address and length if set in NVS + If (LNotEqual (\S1B0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (\S1B0, B0AD) + Store (SIO_BAR_LEN, B0LN) + } + + // Check if Serial IO DMA Controller is enabled + If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) { + Return (ConcatenateResTemplate (RBUF, DBUF)) + } Else { + Return (RBUF) + } + } + + Method (_STA, 0, NotSerialized) + { + If (LEqual (\S1EN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (\S1B1, \S1EN) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (\S1B1, \S1EN) + } +} + +Device (I2C1) +{ + // Serial IO I2C1 Controller + Method (_HID) + { + If (\ISWP ()) { + // WildcatPoint + Return ("INT3433") + } + + // LynxPoint-LP + Return ("INT33C3") + } + Name (_UID, 1) + Name (_ADR, 0x00150002) + + Name (SSCN, Package () { 432, 507, 30 }) + Name (FMCN, Package () { 72, 160, 30 }) + + // BAR0 is assigned during PCI enumeration and saved into NVS + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7} + }) + + // DMA channels are only used if Serial IO DMA controller is enabled + Name (DBUF, ResourceTemplate () + { + FixedDMA (0x1A, 6, Width32Bit, DMA1) // Tx + FixedDMA (0x1B, 7, Width32Bit, DMA2) // Rx + }) + + Method (_CRS, 0, NotSerialized) + { + // Update BAR0 address and length if set in NVS + If (LNotEqual (\S2B0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (\S2B0, B0AD) + Store (SIO_BAR_LEN, B0LN) + } + + // Check if Serial IO DMA Controller is enabled + If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) { + Return (ConcatenateResTemplate (RBUF, DBUF)) + } Else { + Return (RBUF) + } + } + + Method (_STA, 0, NotSerialized) + { + If (LEqual (\S2EN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (\S2B1, \S2EN) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (\S2B1, \S2EN) + } +} + +Device (SPI0) +{ + // Serial IO SPI0 Controller + Method (_HID) + { + If (\ISWP ()) { + // WildcatPoint + Return ("INT3430") + } + + // LynxPoint-LP + Return ("INT33C0") + } + Name (_UID, 1) + Name (_ADR, 0x00150003) + + // BAR0 is assigned during PCI enumeration and saved into NVS + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7} + }) + + Method (_CRS, 0, NotSerialized) + { + // Update BAR0 address and length if set in NVS + If (LNotEqual (\S3B0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (\S3B0, B0AD) + Store (SIO_BAR_LEN, B0LN) + } + + Return (RBUF) + } + + Method (_STA, 0, NotSerialized) + { + If (LEqual (\S3EN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (\S3B1, \S3EN) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (\S3B1, \S3EN) + } +} + +Device (SPI1) +{ + // Serial IO SPI1 Controller + Method (_HID) + { + If (\ISWP ()) { + // WildcatPoint + Return ("INT3431") + } + + // LynxPoint-LP + Return ("INT33C1") + } + Name (_UID, 1) + Name (_ADR, 0x00150004) + + // BAR0 is assigned during PCI enumeration and saved into NVS + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {7} + }) + + // DMA channels are only used if Serial IO DMA controller is enabled + Name (DBUF, ResourceTemplate () + { + FixedDMA (0x10, 0, Width32Bit, DMA1) // Tx + FixedDMA (0x11, 1, Width32Bit, DMA2) // Rx + }) + + Method (_CRS, 0, NotSerialized) + { + // Update BAR0 address and length if set in NVS + If (LNotEqual (\S4B0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (\S4B0, B0AD) + Store (SIO_BAR_LEN, B0LN) + } + + // Check if Serial IO DMA Controller is enabled + If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) { + Return (ConcatenateResTemplate (RBUF, DBUF)) + } Else { + Return (RBUF) + } + } + + Method (_STA, 0, NotSerialized) + { + If (LEqual (\S4EN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (\S4B1, \S4EN) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (\S4B1, \S4EN) + } +} + +Device (UAR0) +{ + // Serial IO UART0 Controller + Method (_HID) + { + If (\ISWP ()) { + // WildcatPoint + Return ("INT3434") + } + + // LynxPoint-LP + Return ("INT33C4") + } + Name (_UID, 1) + Name (_ADR, 0x00150005) + + // BAR0 is assigned during PCI enumeration and saved into NVS + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {13} + }) + + // DMA channels are only used if Serial IO DMA controller is enabled + Name (DBUF, ResourceTemplate () + { + FixedDMA (0x16, 2, Width32Bit, DMA1) // Tx + FixedDMA (0x17, 3, Width32Bit, DMA2) // Rx + }) + + Method (_CRS, 0, NotSerialized) + { + // Update BAR0 address and length if set in NVS + If (LNotEqual (\S5B0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (\S5B0, B0AD) + Store (SIO_BAR_LEN, B0LN) + } + + // Check if Serial IO DMA Controller is enabled + If (LNotEqual (\_SB.PCI0.SDMA._STA, Zero)) { + Return (ConcatenateResTemplate (RBUF, DBUF)) + } Else { + Return (RBUF) + } + } + + Method (_STA, 0, NotSerialized) + { + If (LEqual (\S5EN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (\S5B1, \S5EN) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (\S5B1, \S5EN) + } +} + +Device (UAR1) +{ + // Serial IO UART1 Controller + Method (_HID) + { + If (\ISWP ()) { + // WildcatPoint + Return ("INT3435") + } + + // LynxPoint-LP + Return ("INT33C5") + } + Name (_UID, 1) + Name (_ADR, 0x00150006) + + // BAR0 is assigned during PCI enumeration and saved into NVS + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {13} + }) + + Method (_CRS, 0, NotSerialized) + { + // Update BAR0 address and length if set in NVS + If (LNotEqual (\S6B0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (\S6B0, B0AD) + Store (SIO_BAR_LEN, B0LN) + } + + Return (RBUF) + } + + Method (_STA, 0, NotSerialized) + { + If (LEqual (\S6EN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (\S6B1, \S6EN) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (\S6B1, \S6EN) + } +} + +Device (SDIO) +{ + // Serial IO SDIO Controller + Method (_HID) + { + If (\ISWP ()) { + // WildcatPoint + Return ("INT3436") + } + + // LynxPoint-LP + Return ("INT33C6") + } + Name (_CID, "PNP0D40") + Name (_UID, 1) + Name (_ADR, 0x00170000) + + // BAR0 is assigned during PCI enumeration and saved into NVS + Name (RBUF, ResourceTemplate () + { + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000, BAR0) + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, , , ) {5} + }) + + Method (_CRS, 0, NotSerialized) + { + // Update BAR0 address and length if set in NVS + If (LNotEqual (\S7B0, Zero)) { + CreateDwordField (^RBUF, ^BAR0._BAS, B0AD) + CreateDwordField (^RBUF, ^BAR0._LEN, B0LN) + Store (\S7B0, B0AD) + Store (SIO_BAR_LEN, B0LN) + } + + Return (RBUF) + } + + Method (_STA, 0, NotSerialized) + { + If (LEqual (\S7EN, 0)) { + Return (0x0) + } Else { + Return (0xF) + } + } +} diff --git a/src/soc/intel/skylake/acpi/sleepstates.asl b/src/soc/intel/skylake/acpi/sleepstates.asl new file mode 100644 index 0000000..6fea862 --- /dev/null +++ b/src/soc/intel/skylake/acpi/sleepstates.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Name (\_S0, Package () { 0x0, 0x0, 0x0, 0x0 }) +Name (\_S1, Package () { 0x1, 0x1, 0x0, 0x0 }) +Name (\_S2, Package () { 0x1, 0x1, 0x0, 0x0 }) +Name (\_S3, Package () { 0x5, 0x5, 0x0, 0x0 }) +Name (\_S4, Package () { 0x6, 0x6, 0x0, 0x0 }) +Name (\_S5, Package () { 0x7, 0x7, 0x0, 0x0 }) diff --git a/src/soc/intel/skylake/acpi/smbus.asl b/src/soc/intel/skylake/acpi/smbus.asl new file mode 100644 index 0000000..15bcfde --- /dev/null +++ b/src/soc/intel/skylake/acpi/smbus.asl @@ -0,0 +1,241 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Intel SMBus Controller 0:1f.3 + +Device (SBUS) +{ + Name (_ADR, 0x001f0003) + +#ifdef ENABLE_SMBUS_METHODS + OperationRegion (SMBP, PCI_Config, 0x00, 0x100) + Field(SMBP, DWordAcc, NoLock, Preserve) + { + Offset(0x40), + , 2, + I2CE, 1 + } + + OperationRegion (SMBI, SystemIO, SMBUS_IO_BASE, 0x20) + Field (SMBI, ByteAcc, NoLock, Preserve) + { + HSTS, 8, // Host Status + , 8, + HCNT, 8, // Host Control + HCMD, 8, // Host Command + TXSA, 8, // Transmit Slave Address + DAT0, 8, // Host Data 0 + DAT1, 8, // Host Data 1 + HBDB, 8, // Host Block Data Byte + PECK, 8, // Packet Error Check + RXSA, 8, // Receive Slave Address + RXDA, 16, // Receive Slave Data + AUXS, 8, // Auxiliary Status + AUXC, 8, // Auxiliary Control + SLPC, 8, // SMLink Pin Control + SBPC, 8, // SMBus Pin Control + SSTS, 8, // Slave Status + SCMD, 8, // Slave Command + NADR, 8, // Notify Device Address + NDLB, 8, // Notify Data Low Byte + NDLH, 8, // Notify Data High Byte + } + + // Kill all SMBus communication + Method (KILL, 0, Serialized) + { + Or (HCNT, 0x02, HCNT) // Send Kill + Or (HSTS, 0xff, HSTS) // Clean Status + } + + // Check if last operation completed + // return Failure = 0, Success = 1 + Method (CMPL, 0, Serialized) + { + Store (4000, Local0) // Timeout 200ms in 50us steps + While (Local0) { + If (And(HSTS, 0x02)) { // Completion Status? + Return (1) // Operation Completed + } Else { + Stall (50) + Decrement (Local0) + If (LEqual(Local0, 0)) { + KILL() + } + } + } + + Return (0) // Failure + } + + + // Wait for SMBus to become ready + Method (SRDY, 0, Serialized) + { + Store (200, Local0) // Timeout 200ms + While (Local0) { + If (And(HSTS, 0x40)) { // IN_USE? + Sleep(1) // Wait 1ms + Decrement(Local0) // timeout-- + If (LEqual(Local0, 0)) { + Return (1) + } + } Else { + Store (0, Local0) // We're ready + } + } + + Store (4000, Local0) // Timeout 200ms (50us * 4000) + While (Local0) { + If (And (HSTS, 0x01)) { // Host Busy? + Stall(50) // Wait 50us + Decrement(Local0) // timeout-- + If (LEqual(Local0, 0)) { + KILL() + } + } Else { + Return (0) // Success + } + } + + Return (1) // Failure + } + + // SMBus Send Byte + // Arg0: Address + // Arg1: Data + // Return: 1 = Success, 0=Failure + + Method (SSXB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0) + } + + // Send Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Arg0, TXSA) // Write Address + Store (Arg1, HCMD) // Write Data + + Store (0x48, HCNT) // Start + Byte Data Protocol + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (1) // Success + } + + Return (0) + } + + + // SMBus Receive Byte + // Arg0: Address + // Return: 0xffff = Failure, Data (8bit) = Success + + Method (SRXB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0xffff) + } + + // Receive Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Or (Arg0, 1), TXSA) // Write Address + + Store (0x44, HCNT) // Start + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (DAT0) // Success + } + + Return (0xffff) + } + + + // SMBus Write Byte + // Arg0: Address + // Arg1: Command + // Arg2: Data + // Return: 1 = Success, 0=Failure + + Method (SWRB, 3, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0) + } + + // Send Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Arg0, TXSA) // Write Address + Store (Arg1, HCMD) // Write Command + Store (Arg2, DAT0) // Write Data + + Store (0x48, HCNT) // Start + Byte Protocol + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (1) // Success + } + + Return (0) + } + + + // SMBus Read Byte + // Arg0: Address + // Arg1: Command + // Return: 0xffff = Failure, Data (8bit) = Success + + Method (SRDB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0xffff) + } + + // Receive Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Or (Arg0, 1), TXSA) // Write Address + Store (Arg1, HCMD) // Command + + Store (0x48, HCNT) // Start + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (DAT0) // Success + } + + Return (0xffff) + } +#endif +} + diff --git a/src/soc/intel/skylake/acpi/systemagent.asl b/src/soc/intel/skylake/acpi/systemagent.asl new file mode 100644 index 0000000..c2049ea --- /dev/null +++ b/src/soc/intel/skylake/acpi/systemagent.asl @@ -0,0 +1,213 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <soc/iomap.h> + +Name (_HID, EISAID ("PNP0A08")) // PCIe +Name (_CID, EISAID ("PNP0A03")) // PCI + +Name (_ADR, 0) +Name (_BBN, 0) + +Device (MCHC) +{ + Name (_ADR, 0x00000000) // 0:0.0 + + OperationRegion (MCHP, PCI_Config, 0x00, 0x100) + Field (MCHP, DWordAcc, NoLock, Preserve) + { + Offset (0x70), // ME Base Address + MEBA, 64, + Offset (0xa0), // Top of Used Memory + TOM, 64, + Offset (0xbc), // Top of Low Used Memory + TLUD, 32, + } +} + +// Current Resource Settings + +Method (_CRS, 0, Serialized) +{ + Name (MCRS, ResourceTemplate() + { + // Bus Numbers + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, 0x0000, 0x00ff, 0x0000, 0x0100,,, PB00) + + // IO Region 0 + DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, 0x0000, 0x0cf7, 0x0000, 0x0cf8,,, PI00) + + // PCI Config Space + Io (Decode16, 0x0cf8, 0x0cf8, 0x0001, 0x0008) + + // IO Region 1 + DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, 0x0d00, 0xffff, 0x0000, 0xf300,,, PI01) + + // VGA memory (0xa0000-0xbffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000a0000, 0x000bffff, 0x00000000, + 0x00020000,,, ASEG) + + // OPROM reserved (0xc0000-0xc3fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000c0000, 0x000c3fff, 0x00000000, + 0x00004000,,, OPR0) + + // OPROM reserved (0xc4000-0xc7fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000c4000, 0x000c7fff, 0x00000000, + 0x00004000,,, OPR1) + + // OPROM reserved (0xc8000-0xcbfff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000c8000, 0x000cbfff, 0x00000000, + 0x00004000,,, OPR2) + + // OPROM reserved (0xcc000-0xcffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000cc000, 0x000cffff, 0x00000000, + 0x00004000,,, OPR3) + + // OPROM reserved (0xd0000-0xd3fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000d0000, 0x000d3fff, 0x00000000, + 0x00004000,,, OPR4) + + // OPROM reserved (0xd4000-0xd7fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000d4000, 0x000d7fff, 0x00000000, + 0x00004000,,, OPR5) + + // OPROM reserved (0xd8000-0xdbfff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000d8000, 0x000dbfff, 0x00000000, + 0x00004000,,, OPR6) + + // OPROM reserved (0xdc000-0xdffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000dc000, 0x000dffff, 0x00000000, + 0x00004000,,, OPR7) + + // BIOS Extension (0xe0000-0xe3fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000e0000, 0x000e3fff, 0x00000000, + 0x00004000,,, ESG0) + + // BIOS Extension (0xe4000-0xe7fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000e4000, 0x000e7fff, 0x00000000, + 0x00004000,,, ESG1) + + // BIOS Extension (0xe8000-0xebfff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000e8000, 0x000ebfff, 0x00000000, + 0x00004000,,, ESG2) + + // BIOS Extension (0xec000-0xeffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000ec000, 0x000effff, 0x00000000, + 0x00004000,,, ESG3) + + // System BIOS (0xf0000-0xfffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000f0000, 0x000fffff, 0x00000000, + 0x00010000,,, FSEG) + + // PCI Memory Region (Top of memory-CONFIG_MMCONF_BASE_ADDRESS) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000,,, PM01) + + // TPM Area (0xfed40000-0xfed44fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0xfed40000, 0xfed44fff, 0x00000000, + 0x00005000,,, TPMR) + }) + + // Find PCI resource area in MCRS + CreateDwordField(MCRS, PM01._MIN, PMIN) + CreateDwordField(MCRS, PM01._MAX, PMAX) + CreateDwordField(MCRS, PM01._LEN, PLEN) + + // Fix up PCI memory region + // Start with Top of Lower Usable DRAM + Store (^MCHC.TLUD, Local0) + Store (^MCHC.MEBA, Local1) + + // Check if ME base is equal + If (LEqual (Local0, Local1)) { + // Use Top Of Memory instead + Store (^MCHC.TOM, Local0) + } + + Store (Local0, PMIN) + Store (Subtract(CONFIG_MMCONF_BASE_ADDRESS, 1), PMAX) + Add(Subtract(PMAX, PMIN), 1, PLEN) + + Return (MCRS) +} + +/* PCI Device Resource Consumption */ +Device (PDRC) +{ + Name (_HID, EISAID("PNP0C02")) + Name (_UID, 1) + + Name (PDRS, ResourceTemplate() { + Memory32Fixed (ReadWrite, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE) + Memory32Fixed (ReadWrite, MCH_BASE_ADDRESS, MCH_BASE_SIZE) + Memory32Fixed (ReadWrite, DMI_BASE_ADDRESS, DMI_BASE_SIZE) + Memory32Fixed (ReadWrite, EP_BASE_ADDRESS, EP_BASE_SIZE) + Memory32Fixed (ReadWrite, MCFG_BASE_ADDRESS, MCFG_BASE_SIZE) + Memory32Fixed (ReadWrite, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE) + Memory32Fixed (ReadWrite, GDXC_BASE_ADDRESS, GDXC_BASE_SIZE) + }) + + // Current Resource Settings + Method (_CRS, 0, Serialized) + { + Return (PDRS) + } +} + +/* PCI IRQ assignment */ +#include "pci_irqs.asl" + +/* Configurable TDP */ +#include "ctdp.asl" diff --git a/src/soc/intel/skylake/acpi/xhci.asl b/src/soc/intel/skylake/acpi/xhci.asl new file mode 100644 index 0000000..c41275c --- /dev/null +++ b/src/soc/intel/skylake/acpi/xhci.asl @@ -0,0 +1,371 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// XHCI Controller 0:14.0 + +Device (XHCI) +{ + Name (_ADR, 0x00140000) + + Name (PLSD, 5) // Port Link State - RxDetect + Name (PLSP, 7) // Port Link State - Polling + + OperationRegion (XPRT, PCI_Config, 0x00, 0x100) + Field (XPRT, AnyAcc, NoLock, Preserve) + { + Offset (0x0), + DVID, 16, + Offset (0x10), + , 16, + XMEM, 16, // MEM_BASE + Offset (0x40), + , 11, + SWAI, 1, + , 20, + Offset (0x44), + , 12, + SAIP, 2, + , 18, + Offset (0x74), + D0D3, 2, + , 6, + PMEE, 1, // PME_EN + , 6, + PMES, 1, // PME_STS + Offset (0xb0), + , 13, + MB13, 1, + MB14, 1, + Offset (0xd0), + PR2R, 32, // USB2PR + PR2M, 32, // USB2PRM + PR3R, 32, // USB3PR + PR3M, 32, // USB3PRM + } + + // Clear status bits + Method (LPCL, 0, Serialized) + { + OperationRegion (XREG, SystemMemory, + ShiftLeft (^XMEM, 16), 0x600) + Field (XREG, DWordAcc, Lock, Preserve) + { + Offset (0x510), // PORTSCNUSB3[0] + PSC0, 32, + Offset (0x520), // PORTSCNUSB3[1] + PSC1, 32, + Offset (0x530), // PORTSCNUSB3[2] + PSC2, 32, + Offset (0x540), // PORTSCNUSB3[3] + PSC3, 32, + } + + // Port Enabled/Disabled (Bit 1) + Name (PEDB, ShiftLeft (1, 1)) + + // Change Status (Bits 23:17) + Name (CHST, ShiftLeft (0x7f, 17)) + + // Port 0 + And (PSC0, Not (PEDB), Local0) + Or (Local0, CHST, PSC0) + + // Port 1 + And (PSC1, Not (PEDB), Local0) + Or (Local0, CHST, PSC1) + + // Port 2 + And (PSC2, Not (PEDB), Local0) + Or (Local0, CHST, PSC2) + + // Port 3 + And (PSC3, Not (PEDB), Local0) + Or (Local0, CHST, PSC3) + } + + Method (LPS0, 0, Serialized) + { + OperationRegion (XREG, SystemMemory, + ShiftLeft (^XMEM, 16), 0x600) + Field (XREG, DWordAcc, Lock, Preserve) + { + Offset (0x510), // PORTSCNUSB3 + , 5, + PLS1, 4, // [8:5] Port Link State + PPR1, 1, // [9] Port Power + , 7, + CSC1, 1, // [17] Connect Status Change + , 1, + WRC1, 1, // [19] Warm Port Reset Change + , 11, + WPR1, 1, // [31] Warm Port Reset + Offset (0x520), // PORTSCNUSB3 + , 5, + PLS2, 4, // [8:5] Port Link State + PPR2, 1, // [9] Port Power + , 7, + CSC2, 1, // [17] Connect Status Change + , 1, + WRC2, 1, // [19] Warm Port Reset Change + , 11, + WPR2, 1, // [31] Warm Port Reset + Offset (0x530), // PORTSCNUSB3 + , 5, + PLS3, 4, // [8:5] Port Link State + PPR3, 1, // [9] Port Power + , 7, + CSC3, 1, // [17] Connect Status Change + , 1, + WRC3, 1, // [19] Warm Port Reset Change + , 11, + WPR3, 1, // [31] Warm Port Reset + Offset (0x540), // PORTSCNUSB3 + , 5, + PLS4, 4, // [8:5] Port Link State + PPR4, 1, // [9] Port Power + , 7, + CSC4, 1, // [17] Connect Status Change + , 1, + WRC4, 1, // [19] Warm Port Reset Change + , 11, + WPR4, 1, // [31] Warm Port Reset + } + + // Wait for all powered ports to finish polling + Store (10, Local0) + While (LOr (LOr (LAnd (LEqual (PPR1, 1), LEqual (PLS1, PLSP)), + LAnd (LEqual (PPR2, 1), LEqual (PLS2, PLSP))), + LOr (LAnd (LEqual (PPR3, 1), LEqual (PLS3, PLSP)), + LAnd (LEqual (PPR4, 1), LEqual (PLS4, PLSP))))) + { + If (LEqual (Local0, 0)) { + Break + } + Decrement (Local0) + Stall (10) + } + + // For each USB3 Port: + // If port is disconnected (PLS=5 PP=1 CSC=0) + // 1) Issue warm reset (WPR=1) + // 2) Poll for warm reset complete (WRC=0) + // 3) Write 1 to port status to clear + + // Local# indicate if port is reset + Store (0, Local1) + Store (0, Local2) + Store (0, Local3) + Store (0, Local4) + + If (LAnd (LEqual (PLS1, PLSD), + LAnd (LEqual (CSC1, 0), LEqual (PPR1, 1)))) { + Store (1, WPR1) // Issue warm reset + Store (1, Local1) + } + If (LAnd (LEqual (PLS2, PLSD), + LAnd (LEqual (CSC2, 0), LEqual (PPR2, 1)))) { + Store (1, WPR2) // Issue warm reset + Store (1, Local2) + } + If (LAnd (LEqual (PLS3, PLSD), + LAnd (LEqual (CSC3, 0), LEqual (PPR3, 1)))) { + Store (1, WPR3) // Issue warm reset + Store (1, Local3) + } + If (LAnd (LEqual (PLS4, PLSD), + LAnd (LEqual (CSC4, 0), LEqual (PPR4, 1)))) { + Store (1, WPR4) // Issue warm reset + Store (1, Local4) + } + + // Poll for warm reset complete on all ports that were reset + Store (10, Local0) + While (LOr (LOr (LAnd (LEqual (Local1, 1), LEqual (WRC1, 0)), + LAnd (LEqual (Local2, 1), LEqual (WRC2, 0))), + LOr (LAnd (LEqual (Local3, 1), LEqual (WRC3, 0)), + LAnd (LEqual (Local4, 1), LEqual (WRC4, 0))))) + { + If (LEqual (Local0, 0)) { + Break + } + Decrement (Local0) + Stall (10) + } + + // Clear status bits in all ports + LPCL () + } + + Method (_PSC, 0, NotSerialized) + { + Return (^D0D3) + } + + Method (_PS0, 0, Serialized) + { + If (LEqual (^DVID, 0xFFFF)) { + Return () + } + If (LOr (LEqual (^XMEM, 0xFFFF), LEqual (^XMEM, 0x0000))) { + Return () + } + + OperationRegion (XREG, SystemMemory, + Add (ShiftLeft (^XMEM, 16), 0x8000), 0x200) + Field (XREG, DWordAcc, Lock, Preserve) + { + Offset (0x0e0), // AUX Reset Control 1 + , 15, + AX15, 1, + Offset (0x154), // AUX Domain PM Control Register 2 + , 31, + CLK2, 1, + Offset (0x16c), // AUX Clock Control + , 2, + CLK0, 1, + , 11, + CLK1, 1, // USB3 Port Aux/Core Clock Gating Enable + } + + // If device is in D3, set back to D0 + Store (^D0D3, Local0) + if (LEqual (Local0, 3)) { + Store (0, ^D0D3) + } + + if (LNot (\ISWP())) { + // Clear PCI 0xB0[14:13] + Store (0, ^MB13) + Store (0, ^MB14) + + // Clear MMIO 0x816C[14,2] + Store (0, CLK0) + Store (0, CLK1) + + // Set MMIO 0x8154[31] + Store (1, CLK2) + + // Handle per-port reset if needed + LPS0 () + + // Set MMIO 0x80e0[15] + Store (1, AX15) + + // Clear PCI CFG offset 0x40[11] + Store (0, ^SWAI) + + // Clear PCI CFG offset 0x44[13:12] + Store (0, ^SAIP) + } + + Return () + } + + Method (_PS3, 0, Serialized) + { + If (LEqual (^DVID, 0xFFFF)) { + Return () + } + If (LOr (LEqual (^XMEM, 0xFFFF), LEqual (^XMEM, 0x0000))) { + Return () + } + + OperationRegion (XREG, SystemMemory, + Add (ShiftLeft (^XMEM, 16), 0x8000), 0x200) + Field (XREG, DWordAcc, Lock, Preserve) + { + Offset (0x0e0), // AUX Reset Control 1 + , 15, + AX15, 1, + Offset (0x154), // AUX Domain PM Control Register 2 + , 31, + CLK2, 1, + Offset (0x16c), // AUX Clock Control + , 2, + CLK0, 1, + , 11, + CLK1, 1, // USB3 Port Aux/Core Clock Gating Enable + } + + Store (1, ^PMES) // Clear PME Status + Store (1, ^PMEE) // Enable PME + + // If device is in D3, set back to D0 + Store (^D0D3, Local0) + if (LEqual (Local0, 3)) { + Store (0, ^D0D3) + } + + if (LNot (\ISWP())) { + // Set PCI 0xB0[14:13] + Store (1, ^MB13) + Store (1, ^MB14) + + // Set MMIO 0x816C[14,2] + Store (1, CLK0) + Store (1, CLK1) + + // Clear MMIO 0x8154[31] + Store (0, CLK2) + + // Clear MMIO 0x80e0[15] + Store (0, AX15) + + // Set PCI CFG offset 0x40[11] + Store (1, ^SWAI) + + // Set PCI CFG offset 0x44[13:12] + Store (1, ^SAIP) + } + + // Put device in D3 + Store (3, ^D0D3) + + Return () + } + + Name (_PRW, Package(){ 0x6d, 3 }) + + // Leave USB ports on for to allow Wake from USB + + Method(_S3D,0) // Highest D State in S3 State + { + Return (3) + } + + Method(_S4D,0) // Highest D State in S4 State + { + Return (3) + } + + Device (HUB7) + { + Name (_ADR, 0x00000000) + + // How many are there? + Device (PRT1) { Name (_ADR, 1) } // USB Port 0 + Device (PRT2) { Name (_ADR, 2) } // USB Port 1 + Device (PRT3) { Name (_ADR, 3) } // USB Port 2 + Device (PRT4) { Name (_ADR, 4) } // USB Port 3 + Device (PRT5) { Name (_ADR, 5) } // USB Port 4 + Device (PRT6) { Name (_ADR, 6) } // USB Port 5 + } +} + diff --git a/src/soc/intel/skylake/adsp.c b/src/soc/intel/skylake/adsp.c new file mode 100644 index 0000000..1a7cca7 --- /dev/null +++ b/src/soc/intel/skylake/adsp.c @@ -0,0 +1,167 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <cbmem.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include <delay.h> +#include <soc/adsp.h> +#include <soc/device_nvs.h> +#include <soc/iobp.h> +#include <soc/nvs.h> +#include <soc/pch.h> +#include <soc/ramstage.h> +#include <soc/rcba.h> +#include <soc/intel/broadwell/chip.h> + +static void adsp_init(struct device *dev) +{ + config_t *config = dev->chip_info; + struct resource *bar0, *bar1; + u32 tmp32; + + /* Ensure memory and bus master are enabled */ + tmp32 = pci_read_config32(dev, PCI_COMMAND); + tmp32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config32(dev, PCI_COMMAND, tmp32); + + /* Find BAR0 and BAR1 */ + bar0 = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!bar0) + return; + bar1 = find_resource(dev, PCI_BASE_ADDRESS_1); + if (!bar1) + return; + + /* + * Set LTR value in DSP shim LTR control register to 3ms + * SNOOP_REQ[13]=1b SNOOP_SCALE[12:10]=100b (1ms) SNOOP_VAL[9:0]=3h + */ + tmp32 = pch_is_wpt() ? ADSP_SHIM_BASE_WPT : ADSP_SHIM_BASE_LPT; + write32(res2mmio(bar0, tmp32 + ADSP_SHIM_LTRC, 0), + ADSP_SHIM_LTRC_VALUE); + + /* Program VDRTCTL2 D19:F0:A8[31:0] = 0x00000fff */ + pci_write_config32(dev, ADSP_PCI_VDRTCTL2, ADSP_VDRTCTL2_VALUE); + + /* Program ADSP IOBP VDLDAT1 to 0x040100 */ + pch_iobp_write(ADSP_IOBP_VDLDAT1, ADSP_VDLDAT1_VALUE); + + /* Set D3 Power Gating Enable in D19:F0:A0 based on PCH type */ + tmp32 = pci_read_config32(dev, ADSP_PCI_VDRTCTL0); + if (pch_is_wpt()) { + if (config->adsp_d3_pg_enable) { + tmp32 &= ~ADSP_VDRTCTL0_D3PGD_WPT; + if (config->adsp_sram_pg_enable) + tmp32 &= ~ADSP_VDRTCTL0_D3SRAMPGD_WPT; + else + tmp32 |= ADSP_VDRTCTL0_D3SRAMPGD_WPT; + } else { + tmp32 |= ADSP_VDRTCTL0_D3PGD_WPT; + } + } else { + if (config->adsp_d3_pg_enable) { + tmp32 &= ~ADSP_VDRTCTL0_D3PGD_LPT; + if (config->adsp_sram_pg_enable) + tmp32 &= ~ADSP_VDRTCTL0_D3SRAMPGD_LPT; + else + tmp32 |= ADSP_VDRTCTL0_D3SRAMPGD_LPT; + } else { + tmp32 |= ADSP_VDRTCTL0_D3PGD_LPT; + } + } + pci_write_config32(dev, ADSP_PCI_VDRTCTL0, tmp32); + + /* Set PSF Snoop to SA, RCBA+0x3350[10]=1b */ + RCBA32_OR(0x3350, (1 << 10)); + + /* Set DSP IOBP PMCTL 0x1e0=0x3f */ + pch_iobp_write(ADSP_IOBP_PMCTL, ADSP_PMCTL_VALUE); + + if (config->sio_acpi_mode) { + /* Configure for ACPI mode */ + global_nvs_t *gnvs; + + printk(BIOS_INFO, "ADSP: Enable ACPI Mode IRQ3\n"); + + /* Find ACPI NVS to update BARs */ + gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS); + if (!gnvs) { + printk(BIOS_ERR, "Unable to locate Global NVS\n"); + return; + } + + /* Save BAR0 and BAR1 to ACPI NVS */ + gnvs->dev.bar0[SIO_NVS_ADSP] = (u32)bar0->base; + gnvs->dev.bar1[SIO_NVS_ADSP] = (u32)bar1->base; + gnvs->dev.enable[SIO_NVS_ADSP] = 1; + + /* Set PCI Config Disable Bit */ + pch_iobp_update(ADSP_IOBP_PCICFGCTL, ~0, ADSP_PCICFGCTL_PCICD); + + /* Set interrupt de-assert/assert opcode override to IRQ3 */ + pch_iobp_write(ADSP_IOBP_VDLDAT2, ADSP_IOBP_ACPI_IRQ3); + + /* Enable IRQ3 in RCBA */ + RCBA32_OR(ACPIIRQEN, ADSP_ACPI_IRQEN); + + /* Set ACPI Interrupt Enable Bit */ + pch_iobp_update(ADSP_IOBP_PCICFGCTL, ~ADSP_PCICFGCTL_SPCBAD, + ADSP_PCICFGCTL_ACPIIE); + + /* Put ADSP in D3hot */ + tmp32 = read32(res2mmio(bar1, PCH_PCS, 0)); + tmp32 |= PCH_PCS_PS_D3HOT; + write32(res2mmio(bar1, PCH_PCS, 0), tmp32); + } else { + printk(BIOS_INFO, "ADSP: Enable PCI Mode IRQ23\n"); + + /* Configure for PCI mode */ + pci_write_config32(dev, PCI_INTERRUPT_LINE, ADSP_PCI_IRQ); + + /* Clear ACPI Interrupt Enable Bit */ + pch_iobp_update(ADSP_IOBP_PCICFGCTL, + ~(ADSP_PCICFGCTL_SPCBAD | ADSP_PCICFGCTL_ACPIIE), 0); + } +} + +static struct device_operations adsp_ops = { + .read_resources = &pci_dev_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .init = &adsp_init, + .ops_pci = &broadwell_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { + 0x9c36, /* LynxPoint */ + 0x9cb6, /* WildcatPoint */ + 0 +}; + +static const struct pci_driver pch_adsp __pci_driver = { + .ops = &adsp_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; + diff --git a/src/soc/intel/skylake/bootblock/Makefile.inc b/src/soc/intel/skylake/bootblock/Makefile.inc new file mode 100644 index 0000000..2ca5a45 --- /dev/null +++ b/src/soc/intel/skylake/bootblock/Makefile.inc @@ -0,0 +1 @@ +chipset_bootblock_inc += $(src)/soc/intel/broadwell/bootblock/timestamp.inc diff --git a/src/soc/intel/skylake/bootblock/cpu.c b/src/soc/intel/skylake/bootblock/cpu.c new file mode 100644 index 0000000..3a47d13 --- /dev/null +++ b/src/soc/intel/skylake/bootblock/cpu.c @@ -0,0 +1,142 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <arch/cpu.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/mtrr.h> +#include <arch/io.h> +#include <halt.h> +#include <cpu/intel/microcode/microcode.c> +#include <soc/rcba.h> +#include <soc/msr.h> + +static void set_var_mtrr( + unsigned reg, unsigned base, unsigned size, unsigned type) + +{ + /* Bit Bit 32-35 of MTRRphysMask should be set to 1 */ + msr_t basem, maskm; + basem.lo = base | type; + basem.hi = 0; + wrmsr(MTRRphysBase_MSR(reg), basem); + maskm.lo = ~(size - 1) | MTRRphysMaskValid; + maskm.hi = (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1; + wrmsr(MTRRphysMask_MSR(reg), maskm); +} + +static void enable_rom_caching(void) +{ + msr_t msr; + + disable_cache(); + /* Why only top 4MiB ? */ + set_var_mtrr(1, CACHE_ROM_BASE, CACHE_ROM_SIZE, MTRR_TYPE_WRPROT); + enable_cache(); + + /* Enable Variable MTRRs */ + msr.hi = 0x00000000; + msr.lo = 0x00000800; + wrmsr(MTRRdefType_MSR, msr); +} + +static void bootblock_mdelay(int ms) +{ + u32 target = ms * 24 * 1000; + msr_t current; + msr_t start = rdmsr(MSR_COUNTER_24_MHZ); + + do { + current = rdmsr(MSR_COUNTER_24_MHZ); + } while ((current.lo - start.lo) < target); +} + +static void set_flex_ratio_to_tdp_nominal(void) +{ + msr_t flex_ratio, msr; + u32 soft_reset; + u8 nominal_ratio; + + /* Check for Flex Ratio support */ + flex_ratio = rdmsr(MSR_FLEX_RATIO); + if (!(flex_ratio.lo & FLEX_RATIO_EN)) + return; + + /* Check for >0 configurable TDPs */ + msr = rdmsr(MSR_PLATFORM_INFO); + if (((msr.hi >> 1) & 3) == 0) + return; + + /* Use nominal TDP ratio for flex ratio */ + msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); + nominal_ratio = msr.lo & 0xff; + + /* See if flex ratio is already set to nominal TDP ratio */ + if (((flex_ratio.lo >> 8) & 0xff) == nominal_ratio) + return; + + /* Set flex ratio to nominal TDP ratio */ + flex_ratio.lo &= ~0xff00; + flex_ratio.lo |= nominal_ratio << 8; + flex_ratio.lo |= FLEX_RATIO_LOCK; + wrmsr(MSR_FLEX_RATIO, flex_ratio); + + /* Set flex ratio in soft reset data register bits 11:6. + * RCBA region is enabled in southbridge bootblock */ + soft_reset = RCBA32(SOFT_RESET_DATA); + soft_reset &= ~(0x3f << 6); + soft_reset |= (nominal_ratio & 0x3f) << 6; + RCBA32(SOFT_RESET_DATA) = soft_reset; + + /* Set soft reset control to use register value */ + RCBA32_OR(SOFT_RESET_CTRL, 1); + + /* Delay before reset to avoid potential TPM lockout */ + bootblock_mdelay(30); + + /* Issue warm reset, will be "CPU only" due to soft reset data */ + outb(0x0, 0xcf9); + outb(0x6, 0xcf9); + halt(); +} + +static void check_for_clean_reset(void) +{ + msr_t msr; + msr = rdmsr(MTRRdefType_MSR); + + /* Use the MTRR default type MSR as a proxy for detecting INIT#. + * Reset the system if any known bits are set in that MSR. That is + * an indication of the CPU not being properly reset. */ + if (msr.lo & (MTRRdefTypeEn | MTRRdefTypeFixEn)) { + outb(0x0, 0xcf9); + outb(0x6, 0xcf9); + halt(); + } +} + +static void bootblock_cpu_init(void) +{ + /* Set flex ratio and reset if needed */ + set_flex_ratio_to_tdp_nominal(); + check_for_clean_reset(); + enable_rom_caching(); + intel_update_microcode_from_cbfs(); +} diff --git a/src/soc/intel/skylake/bootblock/pch.c b/src/soc/intel/skylake/bootblock/pch.c new file mode 100644 index 0000000..2fa7220 --- /dev/null +++ b/src/soc/intel/skylake/bootblock/pch.c @@ -0,0 +1,79 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <soc/iomap.h> +#include <soc/lpc.h> +#include <soc/pci_devs.h> +#include <soc/rcba.h> +#include <soc/spi.h> + +/* + * Enable Prefetching and Caching. + */ +static void enable_spi_prefetch(void) +{ + u8 reg8 = pci_read_config8(PCH_DEV_LPC, 0xdc); + reg8 &= ~(3 << 2); + reg8 |= (2 << 2); /* Prefetching and Caching Enabled */ + pci_write_config8(PCH_DEV_LPC, 0xdc, reg8); +} + + +static void map_rcba(void) +{ + pci_write_config32(PCH_DEV_LPC, RCBA, RCBA_BASE_ADDRESS | 1); +} + +static void enable_port80_on_lpc(void) +{ + /* Enable port 80 POST on LPC. The chipset does this by default, + * but it doesn't appear to hurt anything. */ + u32 gcs = RCBA32(GCS); + gcs = gcs & ~0x4; + RCBA32(GCS) = gcs; +} + +static void set_spi_speed(void) +{ + u32 fdod; + u8 ssfc; + + /* Observe SPI Descriptor Component Section 0 */ + SPIBAR32(SPIBAR_FDOC) = 0x1000; + + /* Extract the Write/Erase SPI Frequency from descriptor */ + fdod = SPIBAR32(SPIBAR_FDOD); + fdod >>= 24; + fdod &= 7; + + /* Set Software Sequence frequency to match */ + ssfc = SPIBAR8(SPIBAR_SSFC + 2); + ssfc &= ~7; + ssfc |= fdod; + SPIBAR8(SPIBAR_SSFC + 2) = ssfc; +} + +static void bootblock_southbridge_init(void) +{ + map_rcba(); + enable_spi_prefetch(); + enable_port80_on_lpc(); + set_spi_speed(); +} diff --git a/src/soc/intel/skylake/bootblock/systemagent.c b/src/soc/intel/skylake/bootblock/systemagent.c new file mode 100644 index 0000000..15e7fc8 --- /dev/null +++ b/src/soc/intel/skylake/bootblock/systemagent.c @@ -0,0 +1,44 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <soc/pci_devs.h> +#include <soc/systemagent.h> + +static void bootblock_northbridge_init(void) +{ + uint32_t reg; + + /* + * The "io" variant of the config access is explicitly used to + * setup the PCIEXBAR because CONFIG_MMCONF_SUPPORT_DEFAULT is set to + * to true. That way all subsequent non-explicit config accesses use + * MCFG. This code also assumes that bootblock_northbridge_init() is + * the first thing called in the non-asm boot block code. The final + * assumption is that no assembly code is using the + * CONFIG_MMCONF_SUPPORT_DEFAULT option to do PCI config accesses. + * + * The PCIEXBAR is assumed to live in the memory mapped IO space under + * 4GiB. + */ + reg = 0; + pci_io_write_config32(SA_DEV_ROOT, PCIEXBAR + 4, reg); + reg = CONFIG_MMCONF_BASE_ADDRESS | 4 | 1; /* 64MiB - 0-63 buses. */ + pci_io_write_config32(SA_DEV_ROOT, PCIEXBAR, reg); +} diff --git a/src/soc/intel/skylake/bootblock/timestamp.inc b/src/soc/intel/skylake/bootblock/timestamp.inc new file mode 100644 index 0000000..f565775 --- /dev/null +++ b/src/soc/intel/skylake/bootblock/timestamp.inc @@ -0,0 +1,19 @@ +/* Store the initial timestamp for booting in mmx registers. This works + * because the bootblock isn't being compiled with MMX support so mm0 and + * mm1 will be preserved into romstage. */ + .code32 + +.global stash_timestamp +stash_timestamp: + + /* Save the BIST value */ + movl %eax, %ebp + + finit + rdtsc + movd %eax, %mm0 + movd %edx, %mm1 + + /* Restore the BIST value to %eax */ + movl %ebp, %eax + diff --git a/src/soc/intel/skylake/chip.c b/src/soc/intel/skylake/chip.c new file mode 100644 index 0000000..0026152 --- /dev/null +++ b/src/soc/intel/skylake/chip.c @@ -0,0 +1,80 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <soc/pci_devs.h> +#include <soc/ramstage.h> +#include <soc/intel/broadwell/chip.h> + +static void pci_domain_set_resources(device_t dev) +{ + assign_resources(dev->link_list); +} + +static struct device_operations pci_domain_ops = { + .read_resources = &pci_domain_read_resources, + .set_resources = &pci_domain_set_resources, + .scan_bus = &pci_domain_scan_bus, + .ops_pci_bus = &pci_bus_default_ops, +}; + +static struct device_operations cpu_bus_ops = { + .read_resources = DEVICE_NOOP, + .set_resources = DEVICE_NOOP, + .enable_resources = DEVICE_NOOP, + .init = &broadwell_init_cpus, +}; + +static void broadwell_enable(device_t dev) +{ + /* Set the operations if it is a special bus type */ + if (dev->path.type == DEVICE_PATH_DOMAIN) { + dev->ops = &pci_domain_ops; + } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { + dev->ops = &cpu_bus_ops; + } else if (dev->path.type == DEVICE_PATH_PCI) { + /* Handle PCH device enable */ + if (PCI_SLOT(dev->path.pci.devfn) > SA_DEV_SLOT_MINIHD && + (dev->ops == NULL || dev->ops->enable == NULL)) { + broadwell_pch_enable_dev(dev); + } + } +} + +struct chip_operations soc_intel_broadwell_ops = { + CHIP_NAME("Intel Broadwell") + .enable_dev = &broadwell_enable, + .init = &broadwell_init_pre_device, +}; + +static void pci_set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + else + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + (device << 16) | vendor); +} + +struct pci_operations broadwell_pci_ops = { + .set_subsystem = &pci_set_subsystem +}; diff --git a/src/soc/intel/skylake/chip.h b/src/soc/intel/skylake/chip.h new file mode 100644 index 0000000..77c517d --- /dev/null +++ b/src/soc/intel/skylake/chip.h @@ -0,0 +1,167 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _SOC_INTEL_BROADWELL_CHIP_H_ +#define _SOC_INTEL_BROADWELL_CHIP_H_ + +struct soc_intel_broadwell_config { + /* + * Interrupt Routing configuration + * If bit7 is 1, the interrupt is disabled. + */ + uint8_t pirqa_routing; + uint8_t pirqb_routing; + uint8_t pirqc_routing; + uint8_t pirqd_routing; + uint8_t pirqe_routing; + uint8_t pirqf_routing; + uint8_t pirqg_routing; + uint8_t pirqh_routing; + + /* GPE configuration */ + uint32_t gpe0_en_1; + uint32_t gpe0_en_2; + uint32_t gpe0_en_3; + uint32_t gpe0_en_4; + + /* GPIO SMI configuration */ + uint32_t alt_gp_smi_en; + + /* IDE configuration */ + uint8_t sata_port_map; + uint32_t sata_port0_gen3_tx; + uint32_t sata_port1_gen3_tx; + uint32_t sata_port0_gen3_dtle; + uint32_t sata_port1_gen3_dtle; + + /* + * SATA DEVSLP Mux + * 0 = port 0 DEVSLP on DEVSLP0/GPIO33 + * 1 = port 3 DEVSLP on DEVSLP0/GPIO33 + */ + uint8_t sata_devslp_mux; + + /* + * DEVSLP Disable + * 0: DEVSLP is enabled + * 1: DEVSLP is disabled + */ + uint8_t sata_devslp_disable; + + /* Generic IO decode ranges */ + uint32_t gen1_dec; + uint32_t gen2_dec; + uint32_t gen3_dec; + uint32_t gen4_dec; + + /* Enable linear PCIe Root Port function numbers starting at zero */ + uint8_t pcie_port_coalesce; + + /* Force root port ASPM configuration with port bitmap */ + uint8_t pcie_port_force_aspm; + + /* Put SerialIO devices into ACPI mode instead of a PCI device */ + uint8_t sio_acpi_mode; + + /* I2C voltage select: 0=3.3V 1=1.8V */ + uint8_t sio_i2c0_voltage; + uint8_t sio_i2c1_voltage; + + /* Enable ADSP power gating features */ + uint8_t adsp_d3_pg_enable; + uint8_t adsp_sram_pg_enable; + + /* + * Clock Disable Map: + * [21:16] = CLKOUT_PCIE# 5-0 + * [24] = CLKOUT_ITPXDP + */ + uint32_t icc_clock_disable; + + /* + * Digital Port Hotplug Enable: + * 0x04 = Enabled, 2ms short pulse + * 0x05 = Enabled, 4.5ms short pulse + * 0x06 = Enabled, 6ms short pulse + * 0x07 = Enabled, 100ms short pulse + */ + u8 gpu_dp_b_hotplug; + u8 gpu_dp_c_hotplug; + u8 gpu_dp_d_hotplug; + + /* Panel power sequence timings */ + u8 gpu_panel_port_select; + u8 gpu_panel_power_cycle_delay; + u16 gpu_panel_power_up_delay; + u16 gpu_panel_power_down_delay; + u16 gpu_panel_power_backlight_on_delay; + u16 gpu_panel_power_backlight_off_delay; + + /* Panel backlight settings */ + u32 gpu_cpu_backlight; + u32 gpu_pch_backlight; + + /* + * Graphics CD Clock Frequency + * 0 = 337.5MHz + * 1 = 450MHz + * 2 = 540MHz + * 3 = 675MHz + */ + int cdclk; + + /* Enable S0iX support */ + int s0ix_enable; + + /* + * Minimum voltage for C6/C7 state: + * 0x67 = 1.6V (full swing) + * ... + * 0x79 = 1.7V + * ... + * 0x83 = 1.8V (no swing) + */ + int vr_cpu_min_vid; + + /* + * Set slow VR ramp rate on C-state exit: + * 0 = Fast VR ramp rate / 2 + * 1 = Fast VR ramp rate / 4 + * 2 = Fast VR ramp rate / 8 + * 3 = Fast VR ramp rate / 16 + */ + int vr_slow_ramp_rate_set; + + /* Enable slow VR ramp rate */ + int vr_slow_ramp_rate_enable; + + /* Deep SX enable */ + int deep_sx_enable_ac; + int deep_sx_enable_dc; + + /* TCC activation offset */ + int tcc_offset; +}; + +typedef struct soc_intel_broadwell_config config_t; + +extern struct chip_operations soc_ops; + +#endif diff --git a/src/soc/intel/skylake/cpu.c b/src/soc/intel/skylake/cpu.c new file mode 100644 index 0000000..984ff76 --- /dev/null +++ b/src/soc/intel/skylake/cpu.c @@ -0,0 +1,735 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <string.h> +#include <arch/acpi.h> +#include <cpu/cpu.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/lapic.h> +#include <cpu/x86/mp.h> +#include <cpu/intel/microcode.h> +#include <cpu/intel/speedstep.h> +#include <cpu/intel/turbo.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/name.h> +#include <cpu/x86/smm.h> +#include <delay.h> +#include <pc80/mc146818rtc.h> +#include <soc/cpu.h> +#include <soc/msr.h> +#include <soc/pci_devs.h> +#include <soc/ramstage.h> +#include <soc/rcba.h> +#include <soc/smm.h> +#include <soc/systemagent.h> +#include <soc/intel/broadwell/chip.h> + +/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */ +static const u8 power_limit_time_sec_to_msr[] = { + [0] = 0x00, + [1] = 0x0a, + [2] = 0x0b, + [3] = 0x4b, + [4] = 0x0c, + [5] = 0x2c, + [6] = 0x4c, + [7] = 0x6c, + [8] = 0x0d, + [10] = 0x2d, + [12] = 0x4d, + [14] = 0x6d, + [16] = 0x0e, + [20] = 0x2e, + [24] = 0x4e, + [28] = 0x6e, + [32] = 0x0f, + [40] = 0x2f, + [48] = 0x4f, + [56] = 0x6f, + [64] = 0x10, + [80] = 0x30, + [96] = 0x50, + [112] = 0x70, + [128] = 0x11, +}; + +/* Convert POWER_LIMIT_1_TIME MSR value to seconds */ +static const u8 power_limit_time_msr_to_sec[] = { + [0x00] = 0, + [0x0a] = 1, + [0x0b] = 2, + [0x4b] = 3, + [0x0c] = 4, + [0x2c] = 5, + [0x4c] = 6, + [0x6c] = 7, + [0x0d] = 8, + [0x2d] = 10, + [0x4d] = 12, + [0x6d] = 14, + [0x0e] = 16, + [0x2e] = 20, + [0x4e] = 24, + [0x6e] = 28, + [0x0f] = 32, + [0x2f] = 40, + [0x4f] = 48, + [0x6f] = 56, + [0x10] = 64, + [0x30] = 80, + [0x50] = 96, + [0x70] = 112, + [0x11] = 128, +}; + +/* The core 100MHz BLCK is disabled in deeper c-states. One needs to calibrate + * the 100MHz BCLCK against the 24MHz BLCK to restore the clocks properly + * when a core is woken up. */ +static int pcode_ready(void) +{ + int wait_count; + const int delay_step = 10; + + wait_count = 0; + do { + if (!(MCHBAR32(BIOS_MAILBOX_INTERFACE) & MAILBOX_RUN_BUSY)) + return 0; + wait_count += delay_step; + udelay(delay_step); + } while (wait_count < 1000); + + return -1; +} + +static void calibrate_24mhz_bclk(void) +{ + int err_code; + + if (pcode_ready() < 0) { + printk(BIOS_ERR, "PCODE: mailbox timeout on wait ready.\n"); + return; + } + + /* A non-zero value initiates the PCODE calibration. */ + MCHBAR32(BIOS_MAILBOX_DATA) = ~0; + MCHBAR32(BIOS_MAILBOX_INTERFACE) = + MAILBOX_RUN_BUSY | MAILBOX_BIOS_CMD_FSM_MEASURE_INTVL; + + if (pcode_ready() < 0) { + printk(BIOS_ERR, "PCODE: mailbox timeout on completion.\n"); + return; + } + + err_code = MCHBAR32(BIOS_MAILBOX_INTERFACE) & 0xff; + + printk(BIOS_DEBUG, "PCODE: 24MHz BLCK calibration response: %d\n", + err_code); + + /* Read the calibrated value. */ + MCHBAR32(BIOS_MAILBOX_INTERFACE) = + MAILBOX_RUN_BUSY | MAILBOX_BIOS_CMD_READ_CALIBRATION; + + if (pcode_ready() < 0) { + printk(BIOS_ERR, "PCODE: mailbox timeout on read.\n"); + return; + } + + printk(BIOS_DEBUG, "PCODE: 24MHz BLCK calibration value: 0x%08x\n", + MCHBAR32(BIOS_MAILBOX_DATA)); +} + +static u32 pcode_mailbox_read(u32 command) +{ + if (pcode_ready() < 0) { + printk(BIOS_ERR, "PCODE: mailbox timeout on wait ready.\n"); + return 0; + } + + /* Send command and start transaction */ + MCHBAR32(BIOS_MAILBOX_INTERFACE) = command | MAILBOX_RUN_BUSY; + + if (pcode_ready() < 0) { + printk(BIOS_ERR, "PCODE: mailbox timeout on completion.\n"); + return 0; + } + + /* Read mailbox */ + return MCHBAR32(BIOS_MAILBOX_DATA); +} + +static int pcode_mailbox_write(u32 command, u32 data) +{ + if (pcode_ready() < 0) { + printk(BIOS_ERR, "PCODE: mailbox timeout on wait ready.\n"); + return -1; + } + + MCHBAR32(BIOS_MAILBOX_DATA) = data; + + /* Send command and start transaction */ + MCHBAR32(BIOS_MAILBOX_INTERFACE) = command | MAILBOX_RUN_BUSY; + + if (pcode_ready() < 0) { + printk(BIOS_ERR, "PCODE: mailbox timeout on completion.\n"); + return -1; + } + + return 0; +} + +static void initialize_vr_config(void) +{ + device_t dev = SA_DEV_ROOT; + config_t *conf = dev->chip_info; + msr_t msr; + + printk(BIOS_DEBUG, "Initializing VR config.\n"); + + /* Configure VR_CURRENT_CONFIG. */ + msr = rdmsr(MSR_VR_CURRENT_CONFIG); + /* Preserve bits 63 and 62. Bit 62 is PSI4 enable, but it is only valid + * on ULT systems. */ + msr.hi &= 0xc0000000; + msr.hi |= (0x01 << (52 - 32)); /* PSI3 threshold - 1A. */ + msr.hi |= (0x05 << (42 - 32)); /* PSI2 threshold - 5A. */ + msr.hi |= (0x14 << (32 - 32)); /* PSI1 threshold - 20A. */ + msr.hi |= (1 << (62 - 32)); /* Enable PSI4 */ + /* Leave the max instantaneous current limit (12:0) to default. */ + wrmsr(MSR_VR_CURRENT_CONFIG, msr); + + /* Configure VR_MISC_CONFIG MSR. */ + msr = rdmsr(MSR_VR_MISC_CONFIG); + /* Set the IOUT_SLOPE scalar applied to dIout in U10.1.9 format. */ + msr.hi &= ~(0x3ff << (40 - 32)); + msr.hi |= (0x200 << (40 - 32)); /* 1.0 */ + /* Set IOUT_OFFSET to 0. */ + msr.hi &= ~0xff; + /* Set entry ramp rate to slow. */ + msr.hi &= ~(1 << (51 - 32)); + /* Enable decay mode on C-state entry. */ + msr.hi |= (1 << (52 - 32)); + /* Set the slow ramp rate */ + msr.hi &= ~(0x3 << (53 - 32)); + /* Configure the C-state exit ramp rate. */ + if (conf->vr_slow_ramp_rate_enable) { + /* Configured slow ramp rate. */ + msr.hi |= ((conf->vr_slow_ramp_rate_set & 0x3) << (53 - 32)); + /* Set exit ramp rate to slow. */ + msr.hi &= ~(1 << (50 - 32)); + } else { + /* Fast ramp rate / 4. */ + msr.hi |= (0x01 << (53 - 32)); + /* Set exit ramp rate to fast. */ + msr.hi |= (1 << (50 - 32)); + } + /* Set MIN_VID (31:24) to allow CPU to have full control. */ + msr.lo &= ~0xff000000; + msr.lo |= (conf->vr_cpu_min_vid & 0xff) << 24; + wrmsr(MSR_VR_MISC_CONFIG, msr); + + /* Configure VR_MISC_CONFIG2 MSR. */ + msr = rdmsr(MSR_VR_MISC_CONFIG2); + msr.lo &= ~0xffff; + /* Allow CPU to control minimum voltage completely (15:8) and + * set the fast ramp voltage in 10mV steps. */ + if (cpu_family_model() == BROADWELL_FAMILY_ULT) + msr.lo |= 0x006a; /* 1.56V */ + else + msr.lo |= 0x006f; /* 1.60V */ + wrmsr(MSR_VR_MISC_CONFIG2, msr); + + /* Set C9/C10 VCC Min */ + pcode_mailbox_write(MAILBOX_BIOS_CMD_WRITE_C9C10_VOLTAGE, 0x1f1f); +} + +static void configure_pch_power_sharing(void) +{ + u32 pch_power, pch_power_ext, pmsync, pmsync2; + int i; + + /* Read PCH Power levels from PCODE */ + pch_power = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER); + pch_power_ext = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER_EXT); + + printk(BIOS_INFO, "PCH Power: PCODE Levels 0x%08x 0x%08x\n", + pch_power, pch_power_ext); + + pmsync = RCBA32(PMSYNC_CONFIG); + pmsync2 = RCBA32(PMSYNC_CONFIG2); + + /* Program PMSYNC_TPR_CONFIG PCH power limit values + * pmsync[0:4] = mailbox[0:5] + * pmsync[8:12] = mailbox[6:11] + * pmsync[16:20] = mailbox[12:17] + */ + for (i = 0; i < 3; i++) { + u32 level = pch_power & 0x3f; + pch_power >>= 6; + pmsync &= ~(0x1f << (i * 8)); + pmsync |= (level & 0x1f) << (i * 8); + } + RCBA32(PMSYNC_CONFIG) = pmsync; + + /* Program PMSYNC_TPR_CONFIG2 Extended PCH power limit values + * pmsync2[0:4] = mailbox[23:18] + * pmsync2[8:12] = mailbox_ext[6:11] + * pmsync2[16:20] = mailbox_ext[12:17] + * pmsync2[24:28] = mailbox_ext[18:22] + */ + pmsync2 &= ~0x1f; + pmsync2 |= pch_power & 0x1f; + + for (i = 1; i < 4; i++) { + u32 level = pch_power_ext & 0x3f; + pch_power_ext >>= 6; + pmsync2 &= ~(0x1f << (i * 8)); + pmsync2 |= (level & 0x1f) << (i * 8); + } + RCBA32(PMSYNC_CONFIG2) = pmsync2; +} + +int cpu_config_tdp_levels(void) +{ + msr_t platform_info; + + /* Bits 34:33 indicate how many levels supported */ + platform_info = rdmsr(MSR_PLATFORM_INFO); + return (platform_info.hi >> 1) & 3; +} + +/* + * Configure processor power limits if possible + * This must be done AFTER set of BIOS_RESET_CPL + */ +void set_power_limits(u8 power_limit_1_time) +{ + msr_t msr = rdmsr(MSR_PLATFORM_INFO); + msr_t limit; + unsigned power_unit; + unsigned tdp, min_power, max_power, max_time; + u8 power_limit_1_val; + + if (power_limit_1_time > ARRAY_SIZE(power_limit_time_sec_to_msr)) + power_limit_1_time = 28; + + if (!(msr.lo & PLATFORM_INFO_SET_TDP)) + return; + + /* Get units */ + msr = rdmsr(MSR_PKG_POWER_SKU_UNIT); + power_unit = 2 << ((msr.lo & 0xf) - 1); + + /* Get power defaults for this SKU */ + msr = rdmsr(MSR_PKG_POWER_SKU); + tdp = msr.lo & 0x7fff; + min_power = (msr.lo >> 16) & 0x7fff; + max_power = msr.hi & 0x7fff; + max_time = (msr.hi >> 16) & 0x7f; + + printk(BIOS_DEBUG, "CPU TDP: %u Watts\n", tdp / power_unit); + + if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time) + power_limit_1_time = power_limit_time_msr_to_sec[max_time]; + + if (min_power > 0 && tdp < min_power) + tdp = min_power; + + if (max_power > 0 && tdp > max_power) + tdp = max_power; + + power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time]; + + /* Set long term power limit to TDP */ + limit.lo = 0; + limit.lo |= tdp & PKG_POWER_LIMIT_MASK; + limit.lo |= PKG_POWER_LIMIT_EN; + limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) << + PKG_POWER_LIMIT_TIME_SHIFT; + + /* Set short term power limit to 1.25 * TDP */ + limit.hi = 0; + limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK; + limit.hi |= PKG_POWER_LIMIT_EN; + /* Power limit 2 time is only programmable on server SKU */ + + wrmsr(MSR_PKG_POWER_LIMIT, limit); + + /* Set power limit values in MCHBAR as well */ + MCHBAR32(MCH_PKG_POWER_LIMIT_LO) = limit.lo; + MCHBAR32(MCH_PKG_POWER_LIMIT_HI) = limit.hi; + + /* Set DDR RAPL power limit by copying from MMIO to MSR */ + msr.lo = MCHBAR32(MCH_DDR_POWER_LIMIT_LO); + msr.hi = MCHBAR32(MCH_DDR_POWER_LIMIT_HI); + wrmsr(MSR_DDR_RAPL_LIMIT, msr); + + /* Use nominal TDP values for CPUs with configurable TDP */ + if (cpu_config_tdp_levels()) { + msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); + limit.hi = 0; + limit.lo = msr.lo & 0xff; + wrmsr(MSR_TURBO_ACTIVATION_RATIO, limit); + } +} + +static void configure_c_states(void) +{ + msr_t msr; + + msr = rdmsr(MSR_PMG_CST_CONFIG_CONTROL); + msr.lo |= (1 << 31); // Timed MWAIT Enable + msr.lo |= (1 << 30); // Package c-state Undemotion Enable + msr.lo |= (1 << 29); // Package c-state Demotion Enable + msr.lo |= (1 << 28); // C1 Auto Undemotion Enable + msr.lo |= (1 << 27); // C3 Auto Undemotion Enable + msr.lo |= (1 << 26); // C1 Auto Demotion Enable + msr.lo |= (1 << 25); // C3 Auto Demotion Enable + msr.lo &= ~(1 << 10); // Disable IO MWAIT redirection + /* The deepest package c-state defaults to factory-configured value. */ + wrmsr(MSR_PMG_CST_CONFIG_CONTROL, msr); + + msr = rdmsr(MSR_MISC_PWR_MGMT); + msr.lo &= ~(1 << 0); // Enable P-state HW_ALL coordination + wrmsr(MSR_MISC_PWR_MGMT, msr); + + msr = rdmsr(MSR_POWER_CTL); + msr.lo |= (1 << 18); // Enable Energy Perf Bias MSR 0x1b0 + msr.lo |= (1 << 1); // C1E Enable + msr.lo |= (1 << 0); // Bi-directional PROCHOT# + wrmsr(MSR_POWER_CTL, msr); + + /* C-state Interrupt Response Latency Control 0 - package C3 latency */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_0_LIMIT; + wrmsr(MSR_C_STATE_LATENCY_CONTROL_0, msr); + + /* C-state Interrupt Response Latency Control 1 */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_1_LIMIT; + wrmsr(MSR_C_STATE_LATENCY_CONTROL_1, msr); + + /* C-state Interrupt Response Latency Control 2 - package C6/C7 short */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_2_LIMIT; + wrmsr(MSR_C_STATE_LATENCY_CONTROL_2, msr); + + /* C-state Interrupt Response Latency Control 3 - package C8 */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | + C_STATE_LATENCY_CONTROL_3_LIMIT; + wrmsr(MSR_C_STATE_LATENCY_CONTROL_3, msr); + + /* C-state Interrupt Response Latency Control 4 - package C9 */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | + C_STATE_LATENCY_CONTROL_4_LIMIT; + wrmsr(MSR_C_STATE_LATENCY_CONTROL_4, msr); + + /* C-state Interrupt Response Latency Control 5 - package C10 */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | + C_STATE_LATENCY_CONTROL_5_LIMIT; + wrmsr(MSR_C_STATE_LATENCY_CONTROL_5, msr); +} + +static void configure_thermal_target(void) +{ + device_t dev = SA_DEV_ROOT; + config_t *conf = dev->chip_info; + msr_t msr; + + /* Set TCC activation offset if supported */ + msr = rdmsr(MSR_PLATFORM_INFO); + if ((msr.lo & (1 << 30)) && conf->tcc_offset) { + msr = rdmsr(MSR_TEMPERATURE_TARGET); + msr.lo &= ~(0xf << 24); /* Bits 27:24 */ + msr.lo |= (conf->tcc_offset & 0xf) << 24; + wrmsr(MSR_TEMPERATURE_TARGET, msr); + } +} + +static void configure_misc(void) +{ + msr_t msr; + + msr = rdmsr(IA32_MISC_ENABLE); + msr.lo |= (1 << 0); /* Fast String enable */ + msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */ + msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */ + wrmsr(IA32_MISC_ENABLE, msr); + + /* Disable Thermal interrupts */ + msr.lo = 0; + msr.hi = 0; + wrmsr(IA32_THERM_INTERRUPT, msr); + + /* Enable package critical interrupt only */ + msr.lo = 1 << 4; + msr.hi = 0; + wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr); +} + +static void enable_lapic_tpr(void) +{ + msr_t msr; + + msr = rdmsr(MSR_PIC_MSG_CONTROL); + msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */ + wrmsr(MSR_PIC_MSG_CONTROL, msr); +} + +static void configure_dca_cap(void) +{ + struct cpuid_result cpuid_regs; + msr_t msr; + + /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */ + cpuid_regs = cpuid(1); + if (cpuid_regs.ecx & (1 << 18)) { + msr = rdmsr(IA32_PLATFORM_DCA_CAP); + msr.lo |= 1; + wrmsr(IA32_PLATFORM_DCA_CAP, msr); + } +} + +static void set_max_ratio(void) +{ + msr_t msr, perf_ctl; + + perf_ctl.hi = 0; + + /* Check for configurable TDP option */ + if (get_turbo_state() == TURBO_ENABLED) { + msr = rdmsr(MSR_TURBO_RATIO_LIMIT); + perf_ctl.lo = (msr.lo & 0xff) << 8; + } else if (cpu_config_tdp_levels()) { + /* Set to nominal TDP ratio */ + msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); + perf_ctl.lo = (msr.lo & 0xff) << 8; + } else { + /* Platform Info bits 15:8 give max ratio */ + msr = rdmsr(MSR_PLATFORM_INFO); + perf_ctl.lo = msr.lo & 0xff00; + } + wrmsr(IA32_PERF_CTL, perf_ctl); + + printk(BIOS_DEBUG, "cpu: frequency set to %d\n", + ((perf_ctl.lo >> 8) & 0xff) * CPU_BCLK); +} + +static void set_energy_perf_bias(u8 policy) +{ + msr_t msr; + int ecx; + + /* Determine if energy efficient policy is supported. */ + ecx = cpuid_ecx(0x6); + if (!(ecx & (1 << 3))) + return; + + /* Energy Policy is bits 3:0 */ + msr = rdmsr(IA32_ENERGY_PERFORMANCE_BIAS); + msr.lo &= ~0xf; + msr.lo |= policy & 0xf; + wrmsr(IA32_ENERGY_PERFORMANCE_BIAS, msr); + + printk(BIOS_DEBUG, "cpu: energy policy set to %u\n", policy); +} + +static void configure_mca(void) +{ + msr_t msr; + const unsigned int mcg_cap_msr = 0x179; + int i; + int num_banks; + + msr = rdmsr(mcg_cap_msr); + num_banks = msr.lo & 0xff; + msr.lo = msr.hi = 0; + /* TODO(adurbin): This should only be done on a cold boot. Also, some + * of these banks are core vs package scope. For now every CPU clears + * every bank. */ + for (i = 0; i < num_banks; i++) + wrmsr(IA32_MC0_STATUS + (i * 4), msr); +} + +#if CONFIG_USBDEBUG +static unsigned ehci_debug_addr; +#endif + +static void bsp_init_before_ap_bringup(struct bus *cpu_bus) +{ +#if CONFIG_USBDEBUG + if(!ehci_debug_addr) + ehci_debug_addr = get_ehci_debug(); + set_ehci_debug(0); +#endif + + /* Setup MTRRs based on physical address size. */ + x86_setup_fixed_mtrrs(); + x86_setup_var_mtrrs(cpuid_eax(0x80000008) & 0xff, 2); + x86_mtrr_check(); + +#if CONFIG_USBDEBUG + set_ehci_debug(ehci_debug_addr); +#endif + + initialize_vr_config(); + calibrate_24mhz_bclk(); + configure_pch_power_sharing(); +} + +/* All CPUs including BSP will run the following function. */ +static void cpu_core_init(device_t cpu) +{ + /* Clear out pending MCEs */ + configure_mca(); + + /* Enable the local cpu apics */ + enable_lapic_tpr(); + setup_lapic(); + + /* Configure C States */ + configure_c_states(); + + /* Configure Enhanced SpeedStep and Thermal Sensors */ + configure_misc(); + + /* Thermal throttle activation offset */ + configure_thermal_target(); + + /* Enable Direct Cache Access */ + configure_dca_cap(); + + /* Set energy policy */ + set_energy_perf_bias(ENERGY_POLICY_NORMAL); + + /* Enable Turbo */ + enable_turbo(); +} + +/* MP initialization support. */ +static const void *microcode_patch; +int ht_disabled; + +static int adjust_apic_id_ht_disabled(int index, int apic_id) +{ + return 2 * index; +} + +static void relocate_and_load_microcode(void *unused) +{ + /* Relocate the SMM handler. */ + smm_relocate(); + + /* After SMM relocation a 2nd microcode load is required. */ + intel_microcode_load_unlocked(microcode_patch); +} + +static void enable_smis(void *unused) +{ + /* Now that all APs have been relocated as well as the BSP let SMIs + * start flowing. */ + southbridge_smm_enable_smi(); + + /* Lock down the SMRAM space. */ + smm_lock(); +} + +static struct mp_flight_record mp_steps[] = { + MP_FR_NOBLOCK_APS(relocate_and_load_microcode, NULL, + relocate_and_load_microcode, NULL), + MP_FR_BLOCK_APS(mp_initialize_cpu, NULL, mp_initialize_cpu, NULL), + /* Wait for APs to finish initialization before proceeding. */ + MP_FR_BLOCK_APS(NULL, NULL, enable_smis, NULL), +}; + +static struct device_operations cpu_dev_ops = { + .init = cpu_core_init, +}; + +static struct cpu_device_id cpu_table[] = { + { X86_VENDOR_INTEL, CPUID_HASWELL_ULT }, + { X86_VENDOR_INTEL, CPUID_BROADWELL_C0 }, + { X86_VENDOR_INTEL, CPUID_BROADWELL_D0 }, + { X86_VENDOR_INTEL, CPUID_BROADWELL_E0 }, + { 0, 0 }, +}; + +static const struct cpu_driver driver __cpu_driver = { + .ops = &cpu_dev_ops, + .id_table = cpu_table, +}; + +void broadwell_init_cpus(device_t dev) +{ + struct bus *cpu_bus = dev->link_list; + int num_threads; + int num_cores; + msr_t msr; + struct mp_params mp_params; + void *smm_save_area; + + msr = rdmsr(CORE_THREAD_COUNT_MSR); + num_threads = (msr.lo >> 0) & 0xffff; + num_cores = (msr.lo >> 16) & 0xffff; + printk(BIOS_DEBUG, "CPU has %u cores, %u threads enabled.\n", + num_cores, num_threads); + + ht_disabled = num_threads == num_cores; + + /* Perform any necessary BSP initialization before APs are brought up. + * This call also allows the BSP to prepare for any secondary effects + * from calling cpu_initialize() such as smm_init(). */ + bsp_init_before_ap_bringup(cpu_bus); + + microcode_patch = intel_microcode_find(); + + /* Save default SMM area before relocation occurs. */ + smm_save_area = backup_default_smm_area(); + + mp_params.num_cpus = num_threads; + mp_params.parallel_microcode_load = 1; + if (ht_disabled) + mp_params.adjust_apic_id = adjust_apic_id_ht_disabled; + else + mp_params.adjust_apic_id = NULL; + mp_params.flight_plan = &mp_steps[0]; + mp_params.num_records = ARRAY_SIZE(mp_steps); + mp_params.microcode_pointer = microcode_patch; + + /* Load relocation and permanent handlers. Then initiate relocation. */ + if (smm_initialize()) + printk(BIOS_CRIT, "SMM initialization failed...\n"); + + if (mp_init(cpu_bus, &mp_params)) { + printk(BIOS_ERR, "MP initialization failure.\n"); + } + + /* Set Max Ratio */ + set_max_ratio(); + + /* Restore the default SMM region. */ + restore_default_smm_area(smm_save_area); +} diff --git a/src/soc/intel/skylake/cpu_info.c b/src/soc/intel/skylake/cpu_info.c new file mode 100644 index 0000000..72667ac --- /dev/null +++ b/src/soc/intel/skylake/cpu_info.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> +#include <soc/cpu.h> +#include <soc/msr.h> +#include <soc/systemagent.h> + +u32 cpu_family_model(void) +{ + return cpuid_eax(1) & 0x0fff0ff0; +} + +u32 cpu_stepping(void) +{ + return cpuid_eax(1) & 0xf; +} + +/* Dynamically determine if the part is ULT. */ +int cpu_is_ult(void) +{ + static int ult = -1; + + if (ult < 0) { + u32 fm = cpu_family_model(); + if (fm == BROADWELL_FAMILY_ULT || fm == HASWELL_FAMILY_ULT) + ult = 1; + else + ult = 0; + } + + return ult; +} diff --git a/src/soc/intel/skylake/ehci.c b/src/soc/intel/skylake/ehci.c new file mode 100644 index 0000000..3073a54 --- /dev/null +++ b/src/soc/intel/skylake/ehci.c @@ -0,0 +1,103 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <soc/ehci.h> +#include <soc/pch.h> + +static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + u8 access_cntl; + + access_cntl = pci_read_config8(dev, 0x80); + + /* Enable writes to protected registers. */ + pci_write_config8(dev, 0x80, access_cntl | 1); + + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } + + /* Restore protection. */ + pci_write_config8(dev, 0x80, access_cntl); +} + +static void usb_ehci_set_resources(struct device *dev) +{ +#if CONFIG_USBDEBUG + struct resource *res; + u32 base; + u32 usb_debug; + + usb_debug = get_ehci_debug(); + set_ehci_debug(0); +#endif + pci_dev_set_resources(dev); + +#if CONFIG_USBDEBUG + res = find_resource(dev, 0x10); + set_ehci_debug(usb_debug); + if (!res) return; + base = res->base; + set_ehci_base(base); + report_resource_stored(dev, res, ""); +#endif +} + +static void ehci_enable(struct device *dev) +{ + if (CONFIG_USBDEBUG) + dev->enabled = 1; + else + pch_disable_devfn(dev); +} + +static struct pci_operations ehci_ops_pci = { + .set_subsystem = &usb_ehci_set_subsystem, +}; + +static struct device_operations usb_ehci_ops = { + .read_resources = &pci_dev_read_resources, + .set_resources = &usb_ehci_set_resources, + .enable_resources = &pci_dev_enable_resources, + .ops_pci = &ehci_ops_pci, + .enable = &ehci_enable, +}; + +static const unsigned short pci_device_ids[] = { + 0x9c26, /* LynxPoint-LP */ + 0x9ca6, /* WildcatPoint */ + 0 +}; + +static const struct pci_driver pch_usb_ehci __pci_driver = { + .ops = &usb_ehci_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/soc/intel/skylake/elog.c b/src/soc/intel/skylake/elog.c new file mode 100644 index 0000000..8cbc3e7 --- /dev/null +++ b/src/soc/intel/skylake/elog.c @@ -0,0 +1,141 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <bootstate.h> +#include <cbmem.h> +#include <console/console.h> +#include <stdint.h> +#include <elog.h> +#include <soc/lpc.h> +#include <soc/pm.h> + +static void pch_log_gpio_gpe(u32 gpe0_sts, u32 gpe0_en, int start) +{ + int i; + + gpe0_sts &= gpe0_en; + + for (i = 0; i <= 31; i++) { + if (gpe0_sts & (1 << i)) + elog_add_event_wake(ELOG_WAKE_SOURCE_GPIO, i + start); + } +} + +static void pch_log_wake_source(struct chipset_power_state *ps) +{ + /* Power Button */ + if (ps->pm1_sts & PWRBTN_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_PWRBTN, 0); + + /* RTC */ + if (ps->pm1_sts & RTC_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_RTC, 0); + + /* PCI Express (TODO: determine wake device) */ + if (ps->pm1_sts & PCIEXPWAK_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_PCIE, 0); + + /* PME (TODO: determine wake device) */ + if (ps->gpe0_sts[GPE_STD] & PME_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_PME, 0); + + /* Internal PME (TODO: determine wake device) */ + if (ps->gpe0_sts[GPE_STD] & PME_B0_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_PME_INTERNAL, 0); + + /* SMBUS Wake */ + if (ps->gpe0_sts[GPE_STD] & SMB_WAK_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_SMBUS, 0); + + /* GPIO27 */ + if (ps->gpe0_sts[GPE_STD] & GP27_STS) + elog_add_event_wake(ELOG_WAKE_SOURCE_GPIO, 27); + + /* Log GPIO events in set 1-3 */ + pch_log_gpio_gpe(ps->gpe0_sts[GPE_31_0], ps->gpe0_en[GPE_31_0], 0); + pch_log_gpio_gpe(ps->gpe0_sts[GPE_63_32], ps->gpe0_en[GPE_63_32], 32); + pch_log_gpio_gpe(ps->gpe0_sts[GPE_94_64], ps->gpe0_en[GPE_94_64], 64); +} + +static void pch_log_power_and_resets(struct chipset_power_state *ps) +{ + /* Thermal Trip Status */ + if (ps->gen_pmcon2 & THERMTRIP_STS) + elog_add_event(ELOG_TYPE_THERM_TRIP); + + /* PWR_FLR Power Failure */ + if (ps->gen_pmcon2 & PWROK_FLR) + elog_add_event(ELOG_TYPE_POWER_FAIL); + + /* SUS Well Power Failure */ + if (ps->gen_pmcon3 & SUS_PWR_FLR) + elog_add_event(ELOG_TYPE_SUS_POWER_FAIL); + + /* SYS_PWROK Failure */ + if (ps->gen_pmcon2 & SYSPWR_FLR) + elog_add_event(ELOG_TYPE_SYS_PWROK_FAIL); + + /* PWROK Failure */ + if (ps->gen_pmcon2 & PWROK_FLR) + elog_add_event(ELOG_TYPE_PWROK_FAIL); + + /* TCO Timeout */ + if (ps->prev_sleep_state != 3 && + ps->tco2_sts & TCO2_STS_SECOND_TO) + elog_add_event(ELOG_TYPE_TCO_RESET); + + /* Power Button Override */ + if (ps->pm1_sts & PRBTNOR_STS) + elog_add_event(ELOG_TYPE_POWER_BUTTON_OVERRIDE); + + /* RTC reset */ + if (ps->gen_pmcon3 & RTC_BATTERY_DEAD) + elog_add_event(ELOG_TYPE_RTC_RESET); + + /* System Reset Status (reset button pushed) */ + if (ps->gen_pmcon2 & SYSTEM_RESET_STS) + elog_add_event(ELOG_TYPE_RESET_BUTTON); + + /* General Reset Status */ + if (ps->gen_pmcon3 & GEN_RST_STS) + elog_add_event(ELOG_TYPE_SYSTEM_RESET); + + /* ACPI Wake Event */ + if (ps->prev_sleep_state != SLEEP_STATE_S0) + elog_add_event_byte(ELOG_TYPE_ACPI_WAKE, ps->prev_sleep_state); +} + +static void pch_log_state(void *unused) +{ + struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE); + + if (ps == NULL) { + printk(BIOS_ERR, "Not logging power state information. " + "Power state not found in cbmem.\n"); + return; + } + + /* Power and Reset */ + pch_log_power_and_resets(ps); + + /* Wake Sources */ + pch_log_wake_source(ps); +} + +BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, pch_log_state, NULL); diff --git a/src/soc/intel/skylake/finalize.c b/src/soc/intel/skylake/finalize.c new file mode 100644 index 0000000..bf5cdcd --- /dev/null +++ b/src/soc/intel/skylake/finalize.c @@ -0,0 +1,126 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <bootstate.h> +#include <console/console.h> +#include <console/post_codes.h> +#include <cpu/x86/smm.h> +#include <reg_script.h> +#include <spi-generic.h> +#include <stdlib.h> +#include <soc/pci_devs.h> +#include <soc/lpc.h> +#include <soc/me.h> +#include <soc/rcba.h> +#include <soc/spi.h> +#include <soc/systemagent.h> + +const struct reg_script system_agent_finalize_script[] = { + REG_PCI_OR16(0x50, 1 << 0), /* GGC */ + REG_PCI_OR32(0x5c, 1 << 0), /* DPR */ + REG_PCI_OR32(0x78, 1 << 10), /* ME */ + REG_PCI_OR32(0x90, 1 << 0), /* REMAPBASE */ + REG_PCI_OR32(0x98, 1 << 0), /* REMAPLIMIT */ + REG_PCI_OR32(0xa0, 1 << 0), /* TOM */ + REG_PCI_OR32(0xa8, 1 << 0), /* TOUUD */ + REG_PCI_OR32(0xb0, 1 << 0), /* BDSM */ + REG_PCI_OR32(0xb4, 1 << 0), /* BGSM */ + REG_PCI_OR32(0xb8, 1 << 0), /* TSEGMB */ + REG_PCI_OR32(0xbc, 1 << 0), /* TOLUD */ + REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x5500, 1 << 0), /* PAVP */ + REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x5f00, 1 << 31), /* SA PM */ + REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x6020, 1 << 0), /* UMA GFX */ + REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x63fc, 1 << 0), /* VTDTRK */ + REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x6800, 1 << 31), + REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x7000, 1 << 31), + REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x77fc, 1 << 0), + REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x50fc, 0x8f), + REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x7ffc, 1 << 0), + REG_MMIO_OR32(MCH_BASE_ADDRESS + 0x5880, 1 << 5), + REG_MMIO_WRITE8(MCH_BASE_ADDRESS + 0x50fc, 0x8f), /* MC */ + + REG_SCRIPT_END +}; + +const struct reg_script pch_finalize_script[] = { + /* Set SPI opcode menu */ + REG_MMIO_WRITE16(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + SPIBAR_PREOP, + SPI_OPPREFIX), + REG_MMIO_WRITE16(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + SPIBAR_OPTYPE, + SPI_OPTYPE), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + + SPIBAR_OPMENU_LOWER, SPI_OPMENU_LOWER), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + + SPIBAR_OPMENU_UPPER, SPI_OPMENU_UPPER), + + /* Lock SPIBAR */ + REG_MMIO_OR32(RCBA_BASE_ADDRESS + SPIBAR_OFFSET + SPIBAR_HSFS, + SPIBAR_HSFS_FLOCKDN), + + /* TC Lockdown */ + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x0050, (1 << 31)), + + /* BIOS Interface Lockdown */ + REG_MMIO_OR32(RCBA_BASE_ADDRESS + GCS, (1 << 0)), + + /* Function Disable SUS Well Lockdown */ + REG_MMIO_OR8(RCBA_BASE_ADDRESS + FDSW, (1 << 7)), + + /* Global SMI Lock */ + REG_PCI_OR16(GEN_PMCON_1, SMI_LOCK), + + /* GEN_PMCON Lock */ + REG_PCI_OR8(GEN_PMCON_LOCK, SLP_STR_POL_LOCK | ACPI_BASE_LOCK), + + /* PMSYNC */ + REG_MMIO_OR32(RCBA_BASE_ADDRESS + PMSYNC_CONFIG, (1 << 31)), + + + REG_SCRIPT_END +}; + +static void broadwell_finalize(void *unused) +{ + printk(BIOS_DEBUG, "Finalizing chipset.\n"); + + reg_script_run_on_dev(SA_DEV_ROOT, system_agent_finalize_script); + reg_script_run_on_dev(PCH_DEV_LPC, pch_finalize_script); + + /* Lock */ + RCBA32_OR(0x3a6c, 0x00000001); + + /* Read+Write the following registers */ + MCHBAR32(0x6030) = MCHBAR32(0x6030); + MCHBAR32(0x6034) = MCHBAR32(0x6034); + MCHBAR32(0x6008) = MCHBAR32(0x6008); + RCBA32(0x21a4) = RCBA32(0x21a4); + + /* Re-init SPI after lockdown */ + spi_init(); + + printk(BIOS_DEBUG, "Finalizing SMM.\n"); + outb(APM_CNT_FINALIZE, APM_CNT); + + /* Indicate finalize step with post code */ + post_code(POST_OS_BOOT); +} + +BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, broadwell_finalize, NULL); +BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, broadwell_finalize, NULL); diff --git a/src/soc/intel/skylake/gpio.c b/src/soc/intel/skylake/gpio.c new file mode 100644 index 0000000..dc7d713 --- /dev/null +++ b/src/soc/intel/skylake/gpio.c @@ -0,0 +1,199 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <soc/gpio.h> +#include <soc/iomap.h> +#include <soc/pm.h> + +/* + * This function will return a number that indicates which PIRQ + * this GPIO maps to. If this is not a PIRQ capable GPIO then + * it will return -1. The GPIO to PIRQ mapping is not linear. + */ +static int gpio_to_pirq(int gpio) +{ + switch (gpio) { + case 8: return 0; /* PIRQI */ + case 9: return 1; /* PIRQJ */ + case 10: return 2; /* PIRQK */ + case 13: return 3; /* PIRQL */ + case 14: return 4; /* PIRQM */ + case 45: return 5; /* PIRQN */ + case 46: return 6; /* PIRQO */ + case 47: return 7; /* PIRQP */ + case 48: return 8; /* PIRQQ */ + case 49: return 9; /* PIRQR */ + case 50: return 10; /* PIRQS */ + case 51: return 11; /* PIRQT */ + case 52: return 12; /* PIRQU */ + case 53: return 13; /* PIRQV */ + case 54: return 14; /* PIRQW */ + case 55: return 15; /* PIRQX */ + default: return -1; + }; +} + +void init_one_gpio(int gpio_num, struct gpio_config *config) +{ + u32 owner, route, irqen, reset; + int set, bit; + + if (gpio_num > MAX_GPIO_NUMBER || !config) + return; + + outl(config->conf0, GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)); + outl(config->conf1, GPIO_BASE_ADDRESS + GPIO_CONFIG1(gpio_num)); + + /* Determine set and bit based on GPIO number */ + set = gpio_num >> 5; + bit = gpio_num % 32; + + /* Save settings from current GPIO config */ + owner = inl(GPIO_BASE_ADDRESS + GPIO_OWNER(set)); + route = inl(GPIO_BASE_ADDRESS + GPIO_ROUTE(set)); + irqen = inl(GPIO_BASE_ADDRESS + GPIO_IRQ_IE(set)); + reset = inl(GPIO_BASE_ADDRESS + GPIO_RESET(set)); + + owner |= config->owner << bit; + route |= config->route << bit; + irqen |= config->irqen << bit; + reset |= config->reset << bit; + + outl(owner, GPIO_BASE_ADDRESS + GPIO_OWNER(set)); + outl(route, GPIO_BASE_ADDRESS + GPIO_ROUTE(set)); + outl(irqen, GPIO_BASE_ADDRESS + GPIO_IRQ_IE(set)); + outl(reset, GPIO_BASE_ADDRESS + GPIO_RESET(set)); + + if (set == 0) { + u32 blink = inl(GPIO_BASE_ADDRESS + GPIO_BLINK); + blink |= config->blink << bit; + outl(blink, GPIO_BASE_ADDRESS + GPIO_BLINK); + } + + /* PIRQ to IO-APIC map */ + if (config->pirq == GPIO_PIRQ_APIC_ROUTE) { + u32 pirq2apic = inl(GPIO_BASE_ADDRESS + GPIO_PIRQ_APIC_EN); + set = gpio_to_pirq(gpio_num); + if (set >= 0) { + pirq2apic |= 1 << set; + outl(pirq2apic, GPIO_BASE_ADDRESS + GPIO_PIRQ_APIC_EN); + } + } +} + +void init_gpios(const struct gpio_config config[]) +{ + const struct gpio_config *entry; + u32 owner[3] = {0}; + u32 route[3] = {0}; + u32 irqen[3] = {0}; + u32 reset[3] = {0}; + u32 blink = 0; + u16 pirq2apic = 0; + int set, bit, gpio = 0; + + for (entry = config; entry->conf0 != GPIO_LIST_END; entry++, gpio++) { + if (gpio > MAX_GPIO_NUMBER) + break; + + /* Setup Configuration registers 1 and 2 */ + outl(entry->conf0, GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio)); + outl(entry->conf1, GPIO_BASE_ADDRESS + GPIO_CONFIG1(gpio)); + + /* Determine set and bit based on GPIO number */ + set = gpio >> 5; + bit = gpio % 32; + + /* Apply settings to set specific bits */ + owner[set] |= entry->owner << bit; + route[set] |= entry->route << bit; + irqen[set] |= entry->irqen << bit; + reset[set] |= entry->reset << bit; + + if (set == 0) + blink |= entry->blink << bit; + + /* PIRQ to IO-APIC map */ + if (entry->pirq == GPIO_PIRQ_APIC_ROUTE) { + set = gpio_to_pirq(gpio); + if (set >= 0) + pirq2apic |= 1 << set; + } + } + + for (set = 0; set <= 2; set++) { + outl(owner[set], GPIO_BASE_ADDRESS + GPIO_OWNER(set)); + outl(route[set], GPIO_BASE_ADDRESS + GPIO_ROUTE(set)); + outl(irqen[set], GPIO_BASE_ADDRESS + GPIO_IRQ_IE(set)); + outl(reset[set], GPIO_BASE_ADDRESS + GPIO_RESET(set)); + } + + outl(blink, GPIO_BASE_ADDRESS + GPIO_BLINK); + outl(pirq2apic, GPIO_BASE_ADDRESS + GPIO_PIRQ_APIC_EN); +} + +int get_gpio(int gpio_num) +{ + if (gpio_num > MAX_GPIO_NUMBER) + return 0; + + return !!(inl(GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)) & GPI_LEVEL); +} + +/* + * get a number comprised of multiple GPIO values. gpio_num_array points to + * the array of gpio pin numbers to scan, terminated by -1. + */ +unsigned get_gpios(const int *gpio_num_array) +{ + int gpio; + unsigned bitmask = 1; + unsigned vector = 0; + + while (bitmask && + ((gpio = *gpio_num_array++) != -1)) { + if (get_gpio(gpio)) + vector |= bitmask; + bitmask <<= 1; + } + return vector; +} + +void set_gpio(int gpio_num, int value) +{ + u32 conf0; + + if (gpio_num > MAX_GPIO_NUMBER) + return; + + conf0 = inl(GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)); + conf0 &= ~GPO_LEVEL_MASK; + conf0 |= value << GPO_LEVEL_SHIFT; + outl(conf0, GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)); +} + +int gpio_is_native(int gpio_num) +{ + return !(inl(GPIO_BASE_ADDRESS + GPIO_CONFIG0(gpio_num)) & 1); +} diff --git a/src/soc/intel/skylake/hda.c b/src/soc/intel/skylake/hda.c new file mode 100644 index 0000000..b2992e8 --- /dev/null +++ b/src/soc/intel/skylake/hda.c @@ -0,0 +1,181 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include <delay.h> +#include <soc/intel/common/hda_verb.h> +#include <soc/pch.h> +#include <soc/ramstage.h> +#include <soc/rcba.h> + +const u32 * cim_verb_data = NULL; +u32 cim_verb_data_size = 0; +const u32 * pc_beep_verbs = NULL; +u32 pc_beep_verbs_size = 0; + +static void codecs_init(u8 *base, u32 codec_mask) +{ + int i; + + /* Can support up to 4 codecs */ + for (i = 3; i >= 0; i--) { + if (codec_mask & (1 << i)) + hda_codec_init(base, i, + cim_verb_data_size, + cim_verb_data); + } + + if (pc_beep_verbs_size && pc_beep_verbs) + hda_codec_write(base, pc_beep_verbs_size, pc_beep_verbs); +} + +static void hda_pch_init(struct device *dev, u8 *base) +{ + u8 reg8; + u16 reg16; + u32 reg32; + + if (RCBA32(0x2030) & (1 << 31)) { + reg32 = pci_read_config32(dev, 0x120); + reg32 &= 0xf8ffff01; + reg32 |= (1 << 25); + reg32 |= RCBA32(0x2030) & 0xfe; + pci_write_config32(dev, 0x120, reg32); + } else + printk(BIOS_DEBUG, "HDA: V1CTL disabled.\n"); + + reg32 = pci_read_config32(dev, 0x114); + reg32 &= ~0xfe; + pci_write_config32(dev, 0x114, reg32); + + // Set VCi enable bit + if (pci_read_config32(dev, 0x120) & ((1 << 24) | + (1 << 25) | (1 << 26))) { + reg32 = pci_read_config32(dev, 0x120); + reg32 &= ~(1 << 31); + pci_write_config32(dev, 0x120, reg32); + } + + /* Additional programming steps */ + reg32 = pci_read_config32(dev, 0xc4); + reg32 |= (1 << 24); + pci_write_config32(dev, 0xc4, reg32); + + reg8 = pci_read_config8(dev, 0x40); // Audio Control + reg8 |= 1; // Select HDA mode + pci_write_config8(dev, 0x40, reg8); + + reg8 = pci_read_config8(dev, 0x4d); // Docking Status + reg8 &= ~(1 << 7); // Docking not supported + pci_write_config8(dev, 0x4d, reg8); + + reg16 = read32(base + 0x0012); + reg16 |= (1 << 0); + write32(base + 0x0012, reg16); + + /* disable Auto Voltage Detector */ + reg8 = pci_read_config8(dev, 0x42); + reg8 |= (1 << 2); + pci_write_config8(dev, 0x42, reg8); +} + +static void hda_init(struct device *dev) +{ + u8 *base; + struct resource *res; + u32 codec_mask; + u32 reg32; + + /* Find base address */ + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!res) + return; + + base = res2mmio(res, 0, 0); + printk(BIOS_DEBUG, "HDA: base = %p\n", base); + + /* Set Bus Master */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); + + hda_pch_init(dev, base); + + codec_mask = hda_codec_detect(base); + + if (codec_mask) { + printk(BIOS_DEBUG, "HDA: codec_mask = %02x\n", codec_mask); + codecs_init(base, codec_mask); + } +} + +static void hda_enable(struct device *dev) +{ + u32 reg32; + u8 reg8; + + reg8 = pci_read_config8(dev, 0x43); + reg8 |= 0x6f; + pci_write_config8(dev, 0x43, reg8); + + if (!dev->enabled) { + /* Route I/O buffers to ADSP function */ + reg8 = pci_read_config8(dev, 0x42); + reg8 |= (1 << 7) | (1 << 6); + pci_write_config8(dev, 0x42, reg8); + + printk(BIOS_INFO, "HDA disabled, I/O buffers routed to ADSP\n"); + + /* Ensure memory, io, and bus master are all disabled */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 &= ~(PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | PCI_COMMAND_IO); + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Disable this device */ + pch_disable_devfn(dev); + } +} + +static struct device_operations hda_ops = { + .read_resources = &pci_dev_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .init = &hda_init, + .enable = &hda_enable, + .ops_pci = &broadwell_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { + 0x9c20, /* LynxPoint-LP */ + 0x9ca0, /* WildcatPoint */ + 0 +}; + +static const struct pci_driver pch_hda __pci_driver = { + .ops = &hda_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/soc/intel/skylake/igd.c b/src/soc/intel/skylake/igd.c new file mode 100644 index 0000000..86da0a9 --- /dev/null +++ b/src/soc/intel/skylake/igd.c @@ -0,0 +1,584 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/acpi.h> +#include <arch/io.h> +#include <bootmode.h> +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <stdlib.h> +#include <string.h> +#include <reg_script.h> +#include <drivers/intel/gma/i915_reg.h> +#include <soc/cpu.h> +#include <soc/pm.h> +#include <soc/ramstage.h> +#include <soc/systemagent.h> +#include <soc/intel/broadwell/chip.h> +#include <vendorcode/google/chromeos/chromeos.h> + +#define GT_RETRY 1000 +#define GT_CDCLK_337 0 +#define GT_CDCLK_450 1 +#define GT_CDCLK_540 2 +#define GT_CDCLK_675 3 + +struct reg_script haswell_early_init_script[] = { + /* Enable Force Wake */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa180, 0x00000020), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010001), + REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 1, GT_RETRY), + + /* Enable Counters */ + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa248, 0x00000016), + + /* GFXPAUSE settings */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa000, 0x00070020), + + /* ECO Settings */ + REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0xa180, 0xff3fffff, 0x15000000), + + /* Enable DOP Clock Gating */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9424, 0x000003fd), + + /* Enable Unit Level Clock Gating */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9400, 0x00000080), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9404, 0x40401000), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9408, 0x00000000), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x940c, 0x02000001), + + /* + * RC6 Settings + */ + + /* Wake Rate Limits */ + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa090, 0x00000000), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa098, 0x03e80000), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa09c, 0x00280000), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0a8, 0x0001e848), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0ac, 0x00000019), + + /* Render/Video/Blitter Idle Max Count */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x02054, 0x0000000a), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x12054, 0x0000000a), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x22054, 0x0000000a), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x1a054, 0x0000000a), + + /* RC Sleep / RCx Thresholds */ + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0b0, 0x00000000), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0b4, 0x000003e8), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa0b8, 0x0000c350), + + /* RP Settings */ + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa010, 0x000f4240), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa014, 0x12060000), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa02c, 0x0000e808), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa030, 0x0003bd08), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa068, 0x000101d0), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa06c, 0x00055730), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0xa070, 0x0000000a), + + /* RP Control */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa024, 0x00000b92), + + /* HW RC6 Control */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa090, 0x88040000), + + /* Video Frequency Request */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa00c, 0x08000000), + + /* Set RC6 VIDs */ + REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138128, 0), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138124, 0x80000004), + REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY), + + /* Enable PM Interrupts */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x4402c, 0x03000076), + + /* Enable RC6 in idle */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa094, 0x00040000), + + REG_SCRIPT_END +}; + +static const struct reg_script haswell_late_init_script[] = { + /* Lock settings */ + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a248, (1 << 31)), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a004, (1 << 4)), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a080, (1 << 2)), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a180, (1 << 31)), + + /* Disable Force Wake */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010000), + REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 0, GT_RETRY), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00000001), + + /* Enable power well for DP and Audio */ + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x45400, (1 << 31)), + REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x45400, + (1 << 30), (1 << 30), GT_RETRY), + + REG_SCRIPT_END +}; + +static const struct reg_script broadwell_early_init_script[] = { + /* Enable Force Wake */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010001), + REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 1, GT_RETRY), + + /* Enable push bus metric control and shift */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa248, 0x00000004), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa250, 0x000000ff), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa25c, 0x00000010), + + /* GFXPAUSE settings (set based on stepping) */ + + /* ECO Settings */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa180, 0x45200000), + + /* Enable DOP Clock Gating */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9424, 0x000000fd), + + /* Enable Unit Level Clock Gating */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9400, 0x00000000), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9404, 0x40401000), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x9408, 0x00000000), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x940c, 0x02000001), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x1a054, 0x0000000a), + + /* Video Frequency Request */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa00c, 0x08000000), + + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138158, 0x00000009), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x13815c, 0x0000000d), + + /* + * RC6 Settings + */ + + /* Wake Rate Limits */ + REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x0a090, 0, 0), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a098, 0x03e80000), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a09c, 0x00280000), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0a8, 0x0001e848), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0ac, 0x00000019), + + /* Render/Video/Blitter Idle Max Count */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x02054, 0x0000000a), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x12054, 0x0000000a), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x22054, 0x0000000a), + + /* RC Sleep / RCx Thresholds */ + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0b0, 0x00000000), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a0b8, 0x00000271), + + /* RP Settings */ + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a010, 0x000f4240), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a014, 0x12060000), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a02c, 0x0000e808), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a030, 0x0003bd08), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a068, 0x000101d0), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a06c, 0x00055730), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a070, 0x0000000a), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a168, 0x00000006), + + /* RP Control */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa024, 0x00000b92), + + /* HW RC6 Control */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa090, 0x90040000), + + /* Set RC6 VIDs */ + REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138128, 0), + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x138124, 0x80000004), + REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x138124, (1 << 31), 0, GT_RETRY), + + /* Enable PM Interrupts */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0x4402c, 0x03000076), + + /* Enable RC6 in idle */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa094, 0x00040000), + + REG_SCRIPT_END +}; + +static const struct reg_script broadwell_late_init_script[] = { + /* Lock settings */ + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a248, (1 << 31)), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a000, (1 << 18)), + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x0a180, (1 << 31)), + + /* Disable Force Wake */ + REG_RES_WRITE32(PCI_BASE_ADDRESS_0, 0xa188, 0x00010000), + REG_RES_POLL32(PCI_BASE_ADDRESS_0, FORCEWAKE_ACK_HSW, 1, 0, GT_RETRY), + + /* Enable power well for DP and Audio */ + REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x45400, (1 << 31)), + REG_RES_POLL32(PCI_BASE_ADDRESS_0, 0x45400, + (1 << 30), (1 << 30), GT_RETRY), + + REG_SCRIPT_END +}; + +u32 map_oprom_vendev(u32 vendev) +{ + return SA_IGD_OPROM_VENDEV; +} + +static struct resource *gtt_res = NULL; + +static unsigned long gtt_read(unsigned long reg) +{ + u32 val; + val = read32(res2mmio(gtt_res, reg, 0)); + return val; + +} + +static void gtt_write(unsigned long reg, unsigned long data) +{ + write32(res2mmio(gtt_res, reg, 0), data); +} + +static inline void gtt_rmw(u32 reg, u32 andmask, u32 ormask) +{ + u32 val = gtt_read(reg); + val &= andmask; + val |= ormask; + gtt_write(reg, val); +} + +static int gtt_poll(u32 reg, u32 mask, u32 value) +{ + unsigned try = GT_RETRY; + u32 data; + + while (try--) { + data = gtt_read(reg); + if ((data & mask) == value) + return 1; + udelay(10); + } + + printk(BIOS_ERR, "GT init timeout\n"); + return 0; +} + +static void igd_setup_panel(struct device *dev) +{ + config_t *conf = dev->chip_info; + u32 reg32; + + /* Setup Digital Port Hotplug */ + reg32 = gtt_read(PCH_PORT_HOTPLUG); + if (!reg32) { + reg32 = (conf->gpu_dp_b_hotplug & 0x7) << 2; + reg32 |= (conf->gpu_dp_c_hotplug & 0x7) << 10; + reg32 |= (conf->gpu_dp_d_hotplug & 0x7) << 18; + gtt_write(PCH_PORT_HOTPLUG, reg32); + } + + /* Setup Panel Power On Delays */ + reg32 = gtt_read(PCH_PP_ON_DELAYS); + if (!reg32) { + reg32 = (conf->gpu_panel_port_select & 0x3) << 30; + reg32 |= (conf->gpu_panel_power_up_delay & 0x1fff) << 16; + reg32 |= (conf->gpu_panel_power_backlight_on_delay & 0x1fff); + gtt_write(PCH_PP_ON_DELAYS, reg32); + } + + /* Setup Panel Power Off Delays */ + reg32 = gtt_read(PCH_PP_OFF_DELAYS); + if (!reg32) { + reg32 = (conf->gpu_panel_power_down_delay & 0x1fff) << 16; + reg32 |= (conf->gpu_panel_power_backlight_off_delay & 0x1fff); + gtt_write(PCH_PP_OFF_DELAYS, reg32); + } + + /* Setup Panel Power Cycle Delay */ + if (conf->gpu_panel_power_cycle_delay) { + reg32 = gtt_read(PCH_PP_DIVISOR); + reg32 &= ~0xff; + reg32 |= conf->gpu_panel_power_cycle_delay & 0xff; + gtt_write(PCH_PP_DIVISOR, reg32); + } + + /* Enable Backlight if needed */ + if (conf->gpu_cpu_backlight) { + gtt_write(BLC_PWM_CPU_CTL2, BLC_PWM2_ENABLE); + gtt_write(BLC_PWM_CPU_CTL, conf->gpu_cpu_backlight); + } + if (conf->gpu_pch_backlight) { + gtt_write(BLC_PWM_PCH_CTL1, BLM_PCH_PWM_ENABLE); + gtt_write(BLC_PWM_PCH_CTL2, conf->gpu_pch_backlight); + } +} + +static void igd_cdclk_init_haswell(struct device *dev) +{ + config_t *conf = dev->chip_info; + int cdclk = conf->cdclk; + int devid = pci_read_config16(dev, PCI_DEVICE_ID); + int gpu_is_ulx = 0; + u32 dpdiv, lpcll; + + /* Check for ULX GT1 or GT2 */ + if (devid == 0x0a0e || devid == 0x0a1e) + gpu_is_ulx = 1; + + /* 675MHz is not supported on haswell */ + if (cdclk == GT_CDCLK_675) + cdclk = GT_CDCLK_337; + + /* If CD clock is fixed or ULT then set to 450MHz */ + if ((gtt_read(0x42014) & 0x1000000) || cpu_is_ult()) + cdclk = GT_CDCLK_450; + + /* 540MHz is not supported on ULX */ + if (gpu_is_ulx && cdclk == GT_CDCLK_540) + cdclk = GT_CDCLK_337; + + /* 337.5MHz is not supported on non-ULT/ULX */ + if (!gpu_is_ulx && !cpu_is_ult() && cdclk == GT_CDCLK_337) + cdclk = GT_CDCLK_450; + + /* Set variables based on CD Clock setting */ + switch (cdclk) { + case GT_CDCLK_337: + dpdiv = 169; + lpcll = (1 << 26); + break; + case GT_CDCLK_450: + dpdiv = 225; + lpcll = 0; + break; + case GT_CDCLK_540: + dpdiv = 270; + lpcll = (1 << 26); + break; + default: + return; + } + + /* Set LPCLL_CTL CD Clock Frequency Select */ + gtt_rmw(0x130040, 0xf3ffffff, lpcll); + + /* ULX: Inform power controller of selected frequency */ + if (gpu_is_ulx) { + if (cdclk == GT_CDCLK_450) + gtt_write(0x138128, 0x00000000); /* 450MHz */ + else + gtt_write(0x138128, 0x00000001); /* 337.5MHz */ + gtt_write(0x13812c, 0x00000000); + gtt_write(0x138124, 0x80000017); + } + + /* Set CPU DP AUX 2X bit clock dividers */ + gtt_rmw(0x64010, 0xfffff800, dpdiv); + gtt_rmw(0x64810, 0xfffff800, dpdiv); +} + +static void igd_cdclk_init_broadwell(struct device *dev) +{ + config_t *conf = dev->chip_info; + int cdclk = conf->cdclk; + u32 dpdiv, lpcll, pwctl, cdset; + + /* Inform power controller of upcoming frequency change */ + gtt_write(0x138128, 0); + gtt_write(0x13812c, 0); + gtt_write(0x138124, 0x80000018); + + /* Poll GT driver mailbox for run/busy clear */ + if (!gtt_poll(0x138124, (1 << 31), (0 << 31))) + cdclk = GT_CDCLK_450; + + if (gtt_read(0x42014) & 0x1000000) { + /* If CD clock is fixed then set to 450MHz */ + cdclk = GT_CDCLK_450; + } else { + /* Program CD clock to highest supported freq */ + if (cpu_is_ult()) + cdclk = GT_CDCLK_540; + else + cdclk = GT_CDCLK_675; + } + + /* CD clock frequency 675MHz not supported on ULT */ + if (cpu_is_ult() && cdclk == GT_CDCLK_675) + cdclk = GT_CDCLK_540; + + /* Set variables based on CD Clock setting */ + switch (cdclk) { + case GT_CDCLK_337: + cdset = 337; + lpcll = (1 << 27); + pwctl = 2; + dpdiv = 169; + break; + case GT_CDCLK_450: + cdset = 449; + lpcll = 0; + pwctl = 0; + dpdiv = 225; + break; + case GT_CDCLK_540: + cdset = 539; + lpcll = (1 << 26); + pwctl = 1; + dpdiv = 270; + break; + case GT_CDCLK_675: + cdset = 674; + lpcll = (1 << 26) | (1 << 27); + pwctl = 3; + dpdiv = 338; + default: + return; + } + + /* Set LPCLL_CTL CD Clock Frequency Select */ + gtt_rmw(0x130040, 0xf3ffffff, lpcll); + + /* Inform power controller of selected frequency */ + gtt_write(0x138128, pwctl); + gtt_write(0x13812c, 0); + gtt_write(0x138124, 0x80000017); + + /* Program CD Clock Frequency */ + gtt_rmw(0x46200, 0xfffffc00, cdset); + + /* Set CPU DP AUX 2X bit clock dividers */ + gtt_rmw(0x64010, 0xfffff800, dpdiv); + gtt_rmw(0x64810, 0xfffff800, dpdiv); +} + +static void igd_init(struct device *dev) +{ + int is_broadwell = !!(cpu_family_model() == BROADWELL_FAMILY_ULT); + u32 rp1_gfx_freq; + + /* IGD needs to be Bus Master */ + u32 reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO; + pci_write_config32(dev, PCI_COMMAND, reg32); + + gtt_res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!gtt_res || !gtt_res->base) + return; + + /* Wait for any configured pre-graphics delay */ + if (acpi_slp_type != SLEEP_STATE_S3) { +#if IS_ENABLED(CONFIG_CHROMEOS) + if (developer_mode_enabled() || recovery_mode_enabled() || + vboot_wants_oprom()) + mdelay(CONFIG_PRE_GRAPHICS_DELAY); +#else + mdelay(CONFIG_PRE_GRAPHICS_DELAY); +#endif + } + + /* Early init steps */ + if (is_broadwell) { + reg_script_run_on_dev(dev, broadwell_early_init_script); + + /* Set GFXPAUSE based on stepping */ + if (cpu_stepping() <= (CPUID_BROADWELL_E0 & 0xf) && + systemagent_revision() <= 9) { + gtt_write(0xa000, 0x300ff); + } else { + gtt_write(0xa000, 0x30020); + } + } else { + reg_script_run_on_dev(dev, haswell_early_init_script); + } + + /* Set RP1 graphics frequency */ + rp1_gfx_freq = (MCHBAR32(0x5998) >> 8) & 0xff; + gtt_write(0xa008, rp1_gfx_freq << 24); + + /* Post VBIOS panel setup */ + igd_setup_panel(dev); + + /* Initialize PCI device, load/execute BIOS Option ROM */ + pci_dev_init(dev); + + /* Late init steps */ + if (is_broadwell) { + igd_cdclk_init_broadwell(dev); + reg_script_run_on_dev(dev, broadwell_late_init_script); + } else { + igd_cdclk_init_haswell(dev); + reg_script_run_on_dev(dev, haswell_late_init_script); + } + + if (gfx_get_init_done()) { + /* + * Work around VBIOS issue that is not clearing first 64 + * bytes of the framebuffer during VBE mode set. + */ + struct resource *fb = find_resource(dev, PCI_BASE_ADDRESS_2); + memset((void *)((u32)fb->base), 0, 64); + } + + if (!gfx_get_init_done() && acpi_slp_type != 3) { + /* + * Enable DDI-A if the Option ROM did not execute: + * + * bit 0: Display detected (RO) + * bit 4: DDI A supports 4 lanes and DDI E is not used + * bit 7: DDI buffer is idle + */ + gtt_write(DDI_BUF_CTL_A, DDI_BUF_IS_IDLE | DDI_A_4_LANES | + DDI_INIT_DISPLAY_DETECTED); + } +} + +static struct device_operations igd_ops = { + .read_resources = &pci_dev_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .init = &igd_init, + .ops_pci = &broadwell_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { + IGD_HASWELL_ULT_GT1, + IGD_HASWELL_ULT_GT2, + IGD_HASWELL_ULT_GT3, + IGD_BROADWELL_U_GT1, + IGD_BROADWELL_U_GT2, + IGD_BROADWELL_U_GT3_15W, + IGD_BROADWELL_U_GT3_28W, + IGD_BROADWELL_Y_GT2, + IGD_BROADWELL_H_GT2, + IGD_BROADWELL_H_GT3, + 0, +}; + +static const struct pci_driver igd_driver __pci_driver = { + .ops = &igd_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/soc/intel/skylake/include/soc/acpi.h b/src/soc/intel/skylake/include/soc/acpi.h new file mode 100644 index 0000000..2b1e77e --- /dev/null +++ b/src/soc/intel/skylake/include/soc/acpi.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_ACPI_H_ +#define _BROADWELL_ACPI_H_ + +#include <arch/acpi.h> +#include <soc/nvs.h> + +/* P-state configuration */ +#define PSS_MAX_ENTRIES 8 +#define PSS_RATIO_STEP 2 +#define PSS_LATENCY_TRANSITION 10 +#define PSS_LATENCY_BUSMASTER 10 + +void acpi_create_intel_hpet(acpi_hpet_t *hpet); +void acpi_fill_in_fadt(acpi_fadt_t *fadt); +unsigned long acpi_madt_irq_overrides(unsigned long current); +void acpi_init_gnvs(global_nvs_t *gnvs); + +#endif diff --git a/src/soc/intel/skylake/include/soc/adsp.h b/src/soc/intel/skylake/include/soc/adsp.h new file mode 100644 index 0000000..747a123 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/adsp.h @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_ADSP_H_ +#define _BROADWELL_ADSP_H_ + +#define ADSP_PCI_IRQ 23 +#define ADSP_ACPI_IRQ 3 +#define ADSP_ACPI_IRQEN (1 << 3) + +#define ADSP_SHIM_BASE_LPT 0xe7000 +#define ADSP_SHIM_BASE_WPT 0xfb000 +#define ADSP_SHIM_LTRC 0xe0 +#define ADSP_SHIM_LTRC_VALUE 0x3003 +#define ADSP_SHIM_IMC 0x28 +#define ADSP_SHIM_IPCD 0x40 + +#define ADSP_PCI_VDRTCTL0 0xa0 +#define ADSP_VDRTCTL0_D3PGD_LPT (1 << 1) +#define ADSP_VDRTCTL0_D3PGD_WPT (1 << 0) +#define ADSP_VDRTCTL0_D3SRAMPGD_LPT (1 << 2) +#define ADSP_VDRTCTL0_D3SRAMPGD_WPT (1 << 1) +#define ADSP_PCI_VDRTCTL1 0xa4 +#define ADSP_PCI_VDRTCTL2 0xa8 +#define ADSP_VDRTCTL2_VALUE 0x00000fff + +#define ADSP_IOBP_VDLDAT1 0xd7000624 +#define ADSP_VDLDAT1_VALUE 0x00040100 +#define ADSP_IOBP_VDLDAT2 0xd7000628 +#define ADSP_IOBP_ACPI_IRQ3 0xd9d8 +#define ADSP_IOBP_ACPI_IRQ3I 0xd8d9 +#define ADSP_IOBP_ACPI_IRQ4 0xdbda +#define ADSP_IOBP_PMCTL 0xd70001e0 +#define ADSP_PMCTL_VALUE 0x3f +#define ADSP_IOBP_PCICFGCTL 0xd7000500 +#define ADSP_PCICFGCTL_PCICD (1 << 0) +#define ADSP_PCICFGCTL_ACPIIE (1 << 1) +#define ADSP_PCICFGCTL_SPCBAD (1 << 7) + +#endif diff --git a/src/soc/intel/skylake/include/soc/cpu.h b/src/soc/intel/skylake/include/soc/cpu.h new file mode 100644 index 0000000..312532d --- /dev/null +++ b/src/soc/intel/skylake/include/soc/cpu.h @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_CPU_H_ +#define _BROADWELL_CPU_H_ + +#include <arch/cpu.h> +#include <device/device.h> + +/* CPU types */ +#define HASWELL_FAMILY_ULT 0x40650 +#define BROADWELL_FAMILY_ULT 0x306d0 + +/* Supported CPUIDs */ +#define CPUID_HASWELL_A0 0x306c1 +#define CPUID_HASWELL_B0 0x306c2 +#define CPUID_HASWELL_C0 0x306c3 +#define CPUID_HASWELL_ULT_B0 0x40650 +#define CPUID_HASWELL_ULT 0x40651 +#define CPUID_HASWELL_HALO 0x40661 +#define CPUID_BROADWELL_C0 0x306d2 +#define CPUID_BROADWELL_D0 0x306d3 +#define CPUID_BROADWELL_E0 0x306d4 + +/* CPU bus clock is fixed at 100MHz */ +#define CPU_BCLK 100 + +/* Latency times in units of 1024ns. */ +#define C_STATE_LATENCY_CONTROL_0_LIMIT 0x42 +#define C_STATE_LATENCY_CONTROL_1_LIMIT 0x73 +#define C_STATE_LATENCY_CONTROL_2_LIMIT 0x91 +#define C_STATE_LATENCY_CONTROL_3_LIMIT 0xe4 +#define C_STATE_LATENCY_CONTROL_4_LIMIT 0x145 +#define C_STATE_LATENCY_CONTROL_5_LIMIT 0x1ef + +#define C_STATE_LATENCY_MICRO_SECONDS(limit, base) \ + (((1 << ((base)*5)) * (limit)) / 1000) +#define C_STATE_LATENCY_FROM_LAT_REG(reg) \ + C_STATE_LATENCY_MICRO_SECONDS(C_STATE_LATENCY_CONTROL_ ##reg## _LIMIT, \ + (IRTL_1024_NS >> 10)) + +/* Configure power limits for turbo mode */ +void set_power_limits(u8 power_limit_1_time); +int cpu_config_tdp_levels(void); + +/* + * Determine if HyperThreading is disabled. + * The variable is not valid until setup_ap_init() has been called. + */ +extern int ht_disabled; + +/* CPU identification */ +u32 cpu_family_model(void); +u32 cpu_stepping(void); +int cpu_is_ult(void); + +#endif diff --git a/src/soc/intel/skylake/include/soc/device_nvs.h b/src/soc/intel/skylake/include/soc/device_nvs.h new file mode 100644 index 0000000..7dab40d --- /dev/null +++ b/src/soc/intel/skylake/include/soc/device_nvs.h @@ -0,0 +1,44 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_DEVICE_NVS_H_ +#define _BROADWELL_DEVICE_NVS_H_ + +#include <stdint.h> + +/* Offset in Global NVS where this structure lives */ +#define DEVICE_NVS_OFFSET 0x1000 + +#define SIO_NVS_DMA 0 +#define SIO_NVS_I2C0 1 +#define SIO_NVS_I2C1 2 +#define SIO_NVS_SPI0 3 +#define SIO_NVS_SPI1 4 +#define SIO_NVS_UART0 5 +#define SIO_NVS_UART1 6 +#define SIO_NVS_SDIO 7 +#define SIO_NVS_ADSP 8 + +typedef struct { + u8 enable[9]; + u32 bar0[9]; + u32 bar1[9]; +} __attribute__((packed)) device_nvs_t; + +#endif diff --git a/src/soc/intel/skylake/include/soc/ehci.h b/src/soc/intel/skylake/include/soc/ehci.h new file mode 100644 index 0000000..44d51ef --- /dev/null +++ b/src/soc/intel/skylake/include/soc/ehci.h @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_EHCI_H_ +#define _BROADWELL_EHCI_H_ + +/* EHCI Memory Registers */ +#define EHCI_USB_CMD 0x20 +#define EHCI_USB_CMD_RUN (1 << 0) +#define EHCI_USB_CMD_PSE (1 << 4) +#define EHCI_USB_CMD_ASE (1 << 5) +#define EHCI_PORTSC(port) (0x64 + (port * 4)) +#define EHCI_PORTSC_ENABLED (1 << 2) +#define EHCI_PORTSC_SUSPEND (1 << 7) + +#endif diff --git a/src/soc/intel/skylake/include/soc/gpio.h b/src/soc/intel/skylake/include/soc/gpio.h new file mode 100644 index 0000000..a035975 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/gpio.h @@ -0,0 +1,192 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_GPIO_H_ +#define _BROADWELL_GPIO_H_ + +#include <stdint.h> + +/* PCH-LP GPIOBASE Registers */ +#define GPIO_OWNER(set) (0x00 + ((set) * 4)) +#define GPIO_PIRQ_APIC_EN 0x10 +#define GPIO_BLINK 0x18 +#define GPIO_SER_BLINK 0x1c +#define GPIO_SER_BLINK_CS 0x20 +#define GPIO_SER_BLINK_DATA 0x24 +#define GPIO_ROUTE(set) (0x30 + ((set) * 4)) +#define GPIO_ALT_GPI_SMI_STS 0x50 +#define GPIO_ALT_GPI_SMI_EN 0x54 +#define GPIO_RESET(set) (0x60 + ((set) * 4)) +#define GPIO_GLOBAL_CONFIG 0x7c +#define GPIO_IRQ_IS(set) (0x80 + ((set) * 4)) +#define GPIO_IRQ_IE(set) (0x90 + ((set) * 4)) +#define GPIO_CONFIG0(gpio) (0x100 + ((gpio) * 8)) +#define GPIO_CONFIG1(gpio) (0x104 + ((gpio) * 8)) + +#define MAX_GPIO_NUMBER 94 /* zero based */ +#define GPIO_LIST_END 0xffffffff + +/* conf0 */ + +#define GPIO_MODE_NATIVE (0 << 0) +#define GPIO_MODE_GPIO (1 << 0) + +#define GPIO_DIR_OUTPUT (0 << 2) +#define GPIO_DIR_INPUT (1 << 2) + +#define GPIO_NO_INVERT (0 << 3) +#define GPIO_INVERT (1 << 3) + +#define GPIO_IRQ_EDGE (0 << 4) +#define GPIO_IRQ_LEVEL (1 << 4) + +#define GPI_LEVEL (1 << 30) + +#define GPIO_OUT_LOW 0 +#define GPIO_OUT_HIGH 1 +#define GPO_LEVEL_SHIFT 31 +#define GPO_LEVEL_MASK (1 << GPO_LEVEL_SHIFT) +#define GPO_LEVEL_LOW (GPIO_OUT_LOW << GPO_LEVEL_SHIFT) +#define GPO_LEVEL_HIGH (GPIO_OUT_HIGH << GPO_LEVEL_SHIFT) + +/* conf1 */ + +#define GPIO_PULL_NONE (0 << 0) +#define GPIO_PULL_DOWN (1 << 0) +#define GPIO_PULL_UP (2 << 0) + +#define GPIO_SENSE_ENABLE (0 << 2) +#define GPIO_SENSE_DISABLE (1 << 2) + +/* owner */ + +#define GPIO_OWNER_ACPI 0 +#define GPIO_OWNER_GPIO 1 + +/* route */ + +#define GPIO_ROUTE_SCI 0 +#define GPIO_ROUTE_SMI 1 + +/* irqen */ + +#define GPIO_IRQ_DISABLE 0 +#define GPIO_IRQ_ENABLE 1 + +/* blink */ + +#define GPO_NO_BLINK 0 +#define GPO_BLINK 1 + +/* reset */ + +#define GPIO_RESET_PWROK 0 +#define GPIO_RESET_RSMRST 1 + +/* pirq route to io-apic */ + +#define GPIO_PIRQ_APIC_MASK 0 +#define GPIO_PIRQ_APIC_ROUTE 1 + +#define PCH_GPIO_END \ + { .conf0 = GPIO_LIST_END } + +#define PCH_GPIO_NATIVE \ + { .conf0 = GPIO_MODE_NATIVE } + +#define PCH_GPIO_UNUSED \ + { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT, \ + .owner = GPIO_OWNER_GPIO, \ + .conf1 = GPIO_SENSE_DISABLE } + +#define PCH_GPIO_ACPI_SCI \ + { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT, \ + .owner = GPIO_OWNER_ACPI, \ + .route = GPIO_ROUTE_SCI } + +#define PCH_GPIO_ACPI_SMI \ + { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT, \ + .owner = GPIO_OWNER_ACPI, \ + .route = GPIO_ROUTE_SMI } + +#define PCH_GPIO_INPUT \ + { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT, \ + .owner = GPIO_OWNER_GPIO } + +#define PCH_GPIO_INPUT_INVERT \ + { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT, \ + .owner = GPIO_OWNER_GPIO } + +#define PCH_GPIO_IRQ_EDGE \ + { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_EDGE, \ + .owner = GPIO_OWNER_GPIO, \ + .irqen = GPIO_IRQ_ENABLE } + +#define PCH_GPIO_IRQ_LEVEL \ + { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL, \ + .owner = GPIO_OWNER_GPIO, \ + .irqen = GPIO_IRQ_ENABLE } + +#define PCH_GPIO_PIRQ \ + { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT, \ + .owner = GPIO_OWNER_GPIO, \ + .pirq = GPIO_PIRQ_APIC_ROUTE } + +#define PCH_GPIO_OUT_HIGH \ + { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_OUTPUT | GPO_LEVEL_HIGH, \ + .owner = GPIO_OWNER_GPIO, \ + .conf1 = GPIO_SENSE_DISABLE } + +#define PCH_GPIO_OUT_LOW \ + { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_OUTPUT | GPO_LEVEL_LOW, \ + .owner = GPIO_OWNER_GPIO, \ + .conf1 = GPIO_SENSE_DISABLE } + +struct gpio_config { + u8 gpio; + u32 conf0; + u32 conf1; + u8 owner; + u8 route; + u8 irqen; + u8 reset; + u8 blink; + u8 pirq; +} __attribute__ ((packed)); + +/* Configure GPIOs with mainboard provided settings */ +void init_one_gpio(int gpio_num, struct gpio_config *config); +void init_gpios(const struct gpio_config config[]); + +/* Get GPIO pin value */ +int get_gpio(int gpio_num); + +/* Set GPIO pin value */ +void set_gpio(int gpio_num, int value); + +/* Return non-zero if gpio is set to native function. 0 otherwise. */ +int gpio_is_native(int gpio_num); + +/* + * Get a number comprised of multiple GPIO values. gpio_num_array points to + * the array of gpio pin numbers to scan, terminated by -1. + */ +unsigned get_gpios(const int *gpio_num_array); + +#endif diff --git a/src/soc/intel/skylake/include/soc/iobp.h b/src/soc/intel/skylake/include/soc/iobp.h new file mode 100644 index 0000000..9f17692 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/iobp.h @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_IOBP_H_ +#define _BROADWELL_IOBP_H_ + +u32 pch_iobp_read(u32 address); +void pch_iobp_write(u32 address, u32 data); +void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue); +void pch_iobp_exec(u32 addr, u16 op_dcode, u8 route_id, u32 *data, u8 *resp); + +#endif diff --git a/src/soc/intel/skylake/include/soc/iomap.h b/src/soc/intel/skylake/include/soc/iomap.h new file mode 100644 index 0000000..bb98975 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/iomap.h @@ -0,0 +1,62 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_IOMAP_H_ +#define _BROADWELL_IOMAP_H_ + +#define MCFG_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS +#define MCFG_BASE_SIZE 0x4000000 + +#define MCH_BASE_ADDRESS 0xfed10000 +#define MCH_BASE_SIZE 0x8000 + +#define DMI_BASE_ADDRESS 0xfed18000 +#define DMI_BASE_SIZE 0x1000 + +#define EP_BASE_ADDRESS 0xfed19000 +#define EP_BASE_SIZE 0x1000 + +#define EDRAM_BASE_ADDRESS 0xfed80000 +#define EDRAM_BASE_SIZE 0x4000 + +#define GDXC_BASE_ADDRESS 0xfed84000 +#define GDXC_BASE_SIZE 0x1000 + +#define RCBA_BASE_ADDRESS 0xfed1c000 +#define RCBA_BASE_SIZE 0x4000 + +#define HPET_BASE_ADDRESS 0xfed00000 + +#define ACPI_BASE_ADDRESS 0x1000 +#define ACPI_BASE_SIZE 0x100 + +#define GPIO_BASE_ADDRESS 0x1400 +#define GPIO_BASE_SIZE 0x400 + +#define SMBUS_BASE_ADDRESS 0x0400 +#define SMBUS_BASE_SIZE 0x10 + +/* Temporary addresses used in romstage */ +#define EARLY_GTT_BAR 0xe0000000 +#define EARLY_XHCI_BAR 0xd7000000 +#define EARLY_EHCI_BAR CONFIG_EHCI_BAR +#define EARLY_UART_BAR CONFIG_TTYS0_BASE +#define EARLY_TEMP_MMIO 0xfed08000 + +#endif diff --git a/src/soc/intel/skylake/include/soc/lpc.h b/src/soc/intel/skylake/include/soc/lpc.h new file mode 100644 index 0000000..180e527 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/lpc.h @@ -0,0 +1,93 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_LPC_H_ +#define _BROADWELL_LPC_H_ + +/* PCI Configuration Space (D31:F0): LPC */ +#define SERIRQ_CNTL 0x64 +#define PMBASE 0x40 +#define ACPI_CNTL 0x44 +#define ACPI_EN (1 << 7) +#define SCI_IRQ_SEL (7 << 0) +#define SCIS_IRQ9 0 +#define SCIS_IRQ10 1 +#define SCIS_IRQ11 2 +#define SCIS_IRQ20 4 +#define SCIS_IRQ21 5 +#define SCIS_IRQ22 6 +#define SCIS_IRQ23 7 +#define GPIOBASE 0x48 +#define BIOS_CNTL 0xdc +#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */ +#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */ +#define GPIO_EN (1 << 4) +#define GPIO_ROUT 0xb8 + +#define PIRQA_ROUT 0x60 +#define PIRQB_ROUT 0x61 +#define PIRQC_ROUT 0x62 +#define PIRQD_ROUT 0x63 +#define PIRQE_ROUT 0x68 +#define PIRQF_ROUT 0x69 +#define PIRQG_ROUT 0x6A +#define PIRQH_ROUT 0x6B + +#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */ +#define LPC_EN 0x82 /* LPC IF Enables Register */ +#define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */ +#define CNF1_LPC_EN (1 << 12) /* 0x2e/0x2f */ +#define MC_LPC_EN (1 << 11) /* 0x62/0x66 */ +#define KBC_LPC_EN (1 << 10) /* 0x60/0x64 */ +#define GAMEH_LPC_EN (1 << 9) /* 0x208/0x20f */ +#define GAMEL_LPC_EN (1 << 8) /* 0x200/0x207 */ +#define FDD_LPC_EN (1 << 3) /* LPC_IO_DEC[12] */ +#define LPT_LPC_EN (1 << 2) /* LPC_IO_DEC[9:8] */ +#define COMB_LPC_EN (1 << 1) /* LPC_IO_DEC[6:4] */ +#define COMA_LPC_EN (1 << 0) /* LPC_IO_DEC[2:0] */ +#define LPC_GEN1_DEC 0x84 /* LPC IF Generic Decode Range 1 */ +#define LPC_GEN2_DEC 0x88 /* LPC IF Generic Decode Range 2 */ +#define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */ +#define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */ +#define LGMR 0x98 /* LPC Generic Memory Range */ +#define RCBA 0xf0 /* Root Complex Register Block */ + +/* Power Management */ + +#define GEN_PMCON_1 0xa0 +#define SMI_LOCK (1 << 4) +#define GEN_PMCON_2 0xa2 +#define SYSTEM_RESET_STS (1 << 4) +#define THERMTRIP_STS (1 << 3) +#define SYSPWR_FLR (1 << 1) +#define PWROK_FLR (1 << 0) +#define GEN_PMCON_3 0xa4 +#define SUS_PWR_FLR (1 << 14) +#define GEN_RST_STS (1 << 9) +#define RTC_BATTERY_DEAD (1 << 2) +#define PWR_FLR (1 << 1) +#define SLEEP_AFTER_POWER_FAIL (1 << 0) +#define GEN_PMCON_LOCK 0xa6 +#define SLP_STR_POL_LOCK (1 << 2) +#define ACPI_BASE_LOCK (1 << 1) +#define PMIR 0xac +#define PMIR_CF9LOCK (1 << 31) +#define PMIR_CF9GR (1 << 20) + +#endif diff --git a/src/soc/intel/skylake/include/soc/me.h b/src/soc/intel/skylake/include/soc/me.h new file mode 100644 index 0000000..3973fc8 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/me.h @@ -0,0 +1,507 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_ME_H_ +#define _BROADWELL_ME_H_ + +#include <console/loglevel.h> + +#define ME_RETRY 100000 /* 1 second */ +#define ME_DELAY 10 /* 10 us */ + +/* + * Management Engine PCI registers + */ + +#define PCI_CPU_MEBASE_L 0x70 /* Set by MRC */ +#define PCI_CPU_MEBASE_H 0x74 /* Set by MRC */ + +#define PCI_ME_HFS 0x40 +#define ME_HFS_CWS_RESET 0 +#define ME_HFS_CWS_INIT 1 +#define ME_HFS_CWS_REC 2 +#define ME_HFS_CWS_NORMAL 5 +#define ME_HFS_CWS_WAIT 6 +#define ME_HFS_CWS_TRANS 7 +#define ME_HFS_CWS_INVALID 8 +#define ME_HFS_STATE_PREBOOT 0 +#define ME_HFS_STATE_M0_UMA 1 +#define ME_HFS_STATE_M3 4 +#define ME_HFS_STATE_M0 5 +#define ME_HFS_STATE_BRINGUP 6 +#define ME_HFS_STATE_ERROR 7 +#define ME_HFS_ERROR_NONE 0 +#define ME_HFS_ERROR_UNCAT 1 +#define ME_HFS_ERROR_IMAGE 3 +#define ME_HFS_ERROR_DEBUG 4 +#define ME_HFS_MODE_NORMAL 0 +#define ME_HFS_MODE_DEBUG 2 +#define ME_HFS_MODE_DIS 3 +#define ME_HFS_MODE_OVER_JMPR 4 +#define ME_HFS_MODE_OVER_MEI 5 +#define ME_HFS_BIOS_DRAM_ACK 1 +#define ME_HFS_ACK_NO_DID 0 +#define ME_HFS_ACK_RESET 1 +#define ME_HFS_ACK_PWR_CYCLE 2 +#define ME_HFS_ACK_S3 3 +#define ME_HFS_ACK_S4 4 +#define ME_HFS_ACK_S5 5 +#define ME_HFS_ACK_GBL_RESET 6 +#define ME_HFS_ACK_CONTINUE 7 + +struct me_hfs { + u32 working_state: 4; + u32 mfg_mode: 1; + u32 fpt_bad: 1; + u32 operation_state: 3; + u32 fw_init_complete: 1; + u32 ft_bup_ld_flr: 1; + u32 update_in_progress: 1; + u32 error_code: 4; + u32 operation_mode: 4; + u32 reserved: 4; + u32 boot_options_present: 1; + u32 ack_data: 3; + u32 bios_msg_ack: 4; +} __attribute__ ((packed)); + +#define PCI_ME_UMA 0x44 + +struct me_uma { + u32 size: 6; + u32 reserved_1: 10; + u32 valid: 1; + u32 reserved_0: 14; + u32 set_to_one: 1; +} __attribute__ ((packed)); + +#define PCI_ME_H_GS 0x4c +#define ME_INIT_DONE 1 +#define ME_INIT_STATUS_SUCCESS 0 +#define ME_INIT_STATUS_NOMEM 1 +#define ME_INIT_STATUS_ERROR 2 +#define ME_INIT_STATUS_SUCCESS_OTHER 3 /* SEE ME9 BWG */ + +#define ME_HSIO_MESSAGE (7 << 28) +#define ME_HSIO_CMD_GETHSIOVER 1 +#define ME_HSIO_CMD_CLOSE 0 + +struct me_did { + u32 uma_base: 16; + u32 reserved: 7; + u32 rapid_start: 1; + u32 status: 4; + u32 init_done: 4; +} __attribute__ ((packed)); + +/* + * Apparently the GMES register is renamed to HFS2 (or HFSTS2 according + * to ME9 BWG). Sadly the PCH EDS and the ME BWG do not match on nomenclature. + */ +#define PCI_ME_HFS2 0x48 +/* Infrastructure Progress Values */ +#define ME_HFS2_PHASE_ROM 0 +#define ME_HFS2_PHASE_BUP 1 +#define ME_HFS2_PHASE_UKERNEL 2 +#define ME_HFS2_PHASE_POLICY 3 +#define ME_HFS2_PHASE_MODULE_LOAD 4 +#define ME_HFS2_PHASE_UNKNOWN 5 +#define ME_HFS2_PHASE_HOST_COMM 6 +/* Current State - Based on Infra Progress values. */ +/* ROM State */ +#define ME_HFS2_STATE_ROM_BEGIN 0 +#define ME_HFS2_STATE_ROM_DISABLE 6 +/* BUP State */ +#define ME_HFS2_STATE_BUP_INIT 0 +#define ME_HFS2_STATE_BUP_DIS_HOST_WAKE 1 +#define ME_HFS2_STATE_BUP_FLOW_DET 4 +#define ME_HFS2_STATE_BUP_VSCC_ERR 8 +#define ME_HFS2_STATE_BUP_CHECK_STRAP 0xa +#define ME_HFS2_STATE_BUP_PWR_OK_TIMEOUT 0xb +#define ME_HFS2_STATE_BUP_MANUF_OVRD_STRAP 0xd +#define ME_HFS2_STATE_BUP_M3 0x11 +#define ME_HFS2_STATE_BUP_M0 0x12 +#define ME_HFS2_STATE_BUP_FLOW_DET_ERR 0x13 +#define ME_HFS2_STATE_BUP_M3_CLK_ERR 0x15 +#define ME_HFS2_STATE_BUP_CPU_RESET_DID_TIMEOUT_MEM_MISSING 0x17 +#define ME_HFS2_STATE_BUP_M3_KERN_LOAD 0x18 +#define ME_HFS2_STATE_BUP_T32_MISSING 0x1c +#define ME_HFS2_STATE_BUP_WAIT_DID 0x1f +#define ME_HFS2_STATE_BUP_WAIT_DID_FAIL 0x20 +#define ME_HFS2_STATE_BUP_DID_NO_FAIL 0x21 +#define ME_HFS2_STATE_BUP_ENABLE_UMA 0x22 +#define ME_HFS2_STATE_BUP_ENABLE_UMA_ERR 0x23 +#define ME_HFS2_STATE_BUP_SEND_DID_ACK 0x24 +#define ME_HFS2_STATE_BUP_SEND_DID_ACK_ERR 0x25 +#define ME_HFS2_STATE_BUP_M0_CLK 0x26 +#define ME_HFS2_STATE_BUP_M0_CLK_ERR 0x27 +#define ME_HFS2_STATE_BUP_TEMP_DIS 0x28 +#define ME_HFS2_STATE_BUP_M0_KERN_LOAD 0x32 +/* Policy Module State */ +#define ME_HFS2_STATE_POLICY_ENTRY 0 +#define ME_HFS2_STATE_POLICY_RCVD_S3 3 +#define ME_HFS2_STATE_POLICY_RCVD_S4 4 +#define ME_HFS2_STATE_POLICY_RCVD_S5 5 +#define ME_HFS2_STATE_POLICY_RCVD_UPD 6 +#define ME_HFS2_STATE_POLICY_RCVD_PCR 7 +#define ME_HFS2_STATE_POLICY_RCVD_NPCR 8 +#define ME_HFS2_STATE_POLICY_RCVD_HOST_WAKE 9 +#define ME_HFS2_STATE_POLICY_RCVD_AC_DC 0xa +#define ME_HFS2_STATE_POLICY_RCVD_DID 0xb +#define ME_HFS2_STATE_POLICY_VSCC_NOT_FOUND 0xc +#define ME_HFS2_STATE_POLICY_VSCC_INVALID 0xd +#define ME_HFS2_STATE_POLICY_FPB_ERR 0xe +#define ME_HFS2_STATE_POLICY_DESCRIPTOR_ERR 0xf +#define ME_HFS2_STATE_POLICY_VSCC_NO_MATCH 0x10 +/* Current PM Event Values */ +#define ME_HFS2_PMEVENT_CLEAN_MOFF_MX_WAKE 0 +#define ME_HFS2_PMEVENT_MOFF_MX_WAKE_ERROR 1 +#define ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET 2 +#define ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET_ERROR 3 +#define ME_HFS2_PMEVENT_CLEAN_ME_RESET 4 +#define ME_HFS2_PMEVENT_ME_RESET_EXCEPTION 5 +#define ME_HFS2_PMEVENT_PSEUDO_ME_RESET 6 +#define ME_HFS2_PMEVENT_S0MO_SXM3 7 +#define ME_HFS2_PMEVENT_SXM3_S0M0 8 +#define ME_HFS2_PMEVENT_NON_PWR_CYCLE_RESET 9 +#define ME_HFS2_PMEVENT_PWR_CYCLE_RESET_M3 0xa +#define ME_HFS2_PMEVENT_PWR_CYCLE_RESET_MOFF 0xb +#define ME_HFS2_PMEVENT_SXMX_SXMOFF 0xc + +struct me_hfs2 { + u32 bist_in_progress: 1; + u32 reserved1: 2; + u32 invoke_mebx: 1; + u32 cpu_replaced_sts: 1; + u32 mbp_rdy: 1; + u32 mfs_failure: 1; + u32 warm_reset_request: 1; + u32 cpu_replaced_valid: 1; + u32 reserved2: 4; + u32 mbp_cleared: 1; + u32 reserved3: 2; + u32 current_state: 8; + u32 current_pmevent: 4; + u32 progress_code: 4; +} __attribute__ ((packed)); + +#define PCI_ME_HFS5 0x68 + +#define PCI_ME_H_GS2 0x70 +#define PCI_ME_MBP_GIVE_UP 0x01 + +#define PCI_ME_HERES 0xbc +#define PCI_ME_EXT_SHA1 0x00 +#define PCI_ME_EXT_SHA256 0x02 +#define PCI_ME_HER(x) (0xc0+(4*(x))) + +struct me_heres { + u32 extend_reg_algorithm: 4; + u32 reserved: 26; + u32 extend_feature_present: 1; + u32 extend_reg_valid: 1; +} __attribute__ ((packed)); + +/* + * Management Engine MEI registers + */ + +#define MEI_H_CB_WW 0x00 +#define MEI_H_CSR 0x04 +#define MEI_ME_CB_RW 0x08 +#define MEI_ME_CSR_HA 0x0c + +struct mei_csr { + u32 interrupt_enable: 1; + u32 interrupt_status: 1; + u32 interrupt_generate: 1; + u32 ready: 1; + u32 reset: 1; + u32 reserved: 3; + u32 buffer_read_ptr: 8; + u32 buffer_write_ptr: 8; + u32 buffer_depth: 8; +} __attribute__ ((packed)); + +#define MEI_ADDRESS_CORE 0x01 +#define MEI_ADDRESS_AMT 0x02 +#define MEI_ADDRESS_RESERVED 0x03 +#define MEI_ADDRESS_WDT 0x04 +#define MEI_ADDRESS_MKHI 0x07 +#define MEI_ADDRESS_ICC 0x08 +#define MEI_ADDRESS_THERMAL 0x09 + +#define MEI_HOST_ADDRESS 0 + +struct mei_header { + u32 client_address: 8; + u32 host_address: 8; + u32 length: 9; + u32 reserved: 6; + u32 is_complete: 1; +} __attribute__ ((packed)); + +#define MKHI_GROUP_ID_CBM 0x00 +#define MKHI_GLOBAL_RESET 0x0b +#define MKHI_GROUP_ID_FWCAPS 0x03 +#define MKHI_FWCAPS_GET_RULE 0x02 +#define MKHI_GROUP_ID_HMRFPO 0x05 +#define MKHI_HMRFPO_LOCK 0x02 +#define MKHI_HMRFPO_LOCK_NOACK 0x05 +#define MKHI_GROUP_ID_MDES 0x08 +#define MKHI_MDES_ENABLE 0x09 +#define MKHI_GROUP_ID_GEN 0xff +#define MKHI_GET_FW_VERSION 0x02 +#define MKHI_END_OF_POST 0x0c +#define MKHI_FEATURE_OVERRIDE 0x14 +#define MKHI_END_OF_POST_NOACK 0x1a + +struct mkhi_header { + u32 group_id: 8; + u32 command: 7; + u32 is_response: 1; + u32 reserved: 8; + u32 result: 8; +} __attribute__ ((packed)); + +struct me_fw_version { + u16 code_minor; + u16 code_major; + u16 code_build_number; + u16 code_hot_fix; + u16 recovery_minor; + u16 recovery_major; + u16 recovery_build_number; + u16 recovery_hot_fix; +} __attribute__ ((packed)); + +/* ICC Messages */ +#define ICC_SET_CLOCK_ENABLES 0x3 +#define ICC_API_VERSION_LYNXPOINT 0x00030000 + +struct icc_header { + u32 api_version; + u32 icc_command; + u32 icc_status; + u32 length; + u32 reserved; +} __attribute__ ((packed)); + +struct icc_clock_enables_msg { + u32 clock_enables; + u32 clock_mask; + u32 no_response: 1; + u32 reserved: 31; +} __attribute__ ((packed)); + +#define HECI_EOP_STATUS_SUCCESS 0x0 +#define HECI_EOP_PERFORM_GLOBAL_RESET 0x1 + +#define CBM_RR_GLOBAL_RESET 0x01 + +#define GLOBAL_RESET_BIOS_MRC 0x01 +#define GLOBAL_RESET_BIOS_POST 0x02 +#define GLOBAL_RESET_MEBX 0x03 + +struct me_global_reset { + u8 request_origin; + u8 reset_type; +} __attribute__ ((packed)); + +typedef enum { + ME_NORMAL_BIOS_PATH, + ME_S3WAKE_BIOS_PATH, + ME_ERROR_BIOS_PATH, + ME_RECOVERY_BIOS_PATH, + ME_DISABLE_BIOS_PATH, + ME_FIRMWARE_UPDATE_BIOS_PATH, +} me_bios_path; + +/* + * ME to BIOS Payload Datastructures and definitions. The ordering of the + * structures follows the ordering in the ME9 BWG. + */ + +#define MBP_APPID_KERNEL 1 +#define MBP_APPID_INTEL_AT 3 +#define MBP_APPID_HWA 4 +#define MBP_APPID_ICC 5 +#define MBP_APPID_NFC 6 +/* Kernel items: */ +#define MBP_KERNEL_FW_VER_ITEM 1 +#define MBP_KERNEL_FW_CAP_ITEM 2 +#define MBP_KERNEL_ROM_BIST_ITEM 3 +#define MBP_KERNEL_PLAT_KEY_ITEM 4 +#define MBP_KERNEL_FW_TYPE_ITEM 5 +#define MBP_KERNEL_MFS_FAILURE_ITEM 6 +#define MBP_KERNEL_PLAT_TIME_ITEM 7 +/* Intel AT items: */ +#define MBP_INTEL_AT_STATE_ITEM 1 +/* ICC Items: */ +#define MBP_ICC_PROFILE_ITEM 1 +/* HWA Items: */ +#define MBP_HWA_REQUEST_ITEM 1 +/* NFC Items: */ +#define MBP_NFC_SUPPORT_DATA_ITEM 1 + +#define MBP_MAKE_IDENT(appid, item) ((appid << 8) | item) +#define MBP_IDENT(appid, item) \ + MBP_MAKE_IDENT(MBP_APPID_##appid, MBP_##appid##_##item##_ITEM) + +typedef struct { + u32 mbp_size : 8; + u32 num_entries : 8; + u32 rsvd : 16; +} __attribute__ ((packed)) mbp_header; + +typedef struct { + u32 app_id : 8; + u32 item_id : 8; + u32 length : 8; + u32 rsvd : 8; +} __attribute__ ((packed)) mbp_item_header; + +typedef struct { + u32 major_version : 16; + u32 minor_version : 16; + u32 hotfix_version : 16; + u32 build_version : 16; +} __attribute__ ((packed)) mbp_fw_version_name; + +typedef struct { + u32 full_net : 1; + u32 std_net : 1; + u32 manageability : 1; + u32 reserved_2 : 2; + u32 intel_at : 1; + u32 intel_cls : 1; + u32 reserved : 3; + u32 intel_mpc : 1; + u32 icc_over_clocking : 1; + u32 pavp : 1; + u32 reserved_1 : 4; + u32 ipv6 : 1; + u32 kvm : 1; + u32 och : 1; + u32 vlan : 1; + u32 tls : 1; + u32 reserved_4 : 1; + u32 wlan : 1; + u32 reserved_5 : 8; +} __attribute__ ((packed)) mbp_mefwcaps; + +typedef struct { + u16 device_id; + u16 fuse_test_flags; + u32 umchid[4]; +} __attribute__ ((packed)) mbp_rom_bist_data; + +typedef struct { + u32 key[8]; +} mbp_platform_key; + +typedef struct { + u32 mobile: 1; + u32 desktop: 1; + u32 server: 1; + u32 workstation: 1; + u32 corporate: 1; + u32 consumer: 1; + u32 regular_super_sku: 1; + u32 rsvd: 1; + u32 image_type: 4; + u32 brand: 4; + u32 rsvd1: 16; +} __attribute__ ((packed)) mbp_me_firmware_type; + +typedef struct { + mbp_me_firmware_type rule_data; + u8 available; +} mbp_plat_type; + +typedef struct { + u16 icc_start_address; + u16 mask; +} __attribute__ ((packed)) icc_address_mask; + +typedef struct { + u8 num_icc_profiles; + u8 icc_profile_soft_strap; + u8 icc_profile_index; + u8 reserved; + u32 icc_reg_bundles; + icc_address_mask icc_address_mask[0]; +} __attribute__ ((packed)) mbp_icc_profile; + +typedef struct { + u16 lock_state : 1; + u16 authenticate_module : 1; + u16 s3authentication : 1; + u16 flash_wear_out : 1; + u16 flash_variable_security : 1; + u16 reserved : 11; +} __attribute__ ((packed)) tdt_state_flag; + +typedef struct { + u8 state; + u8 last_theft_trigger; + tdt_state_flag flags; +} __attribute__ ((packed)) mbp_at_state; + +typedef struct { + u32 wake_event_mrst_time_ms; + u32 mrst_pltrst_time_ms; + u32 pltrst_cpurst_time_ms; +} __attribute__ ((packed)) mbp_plat_time; + +typedef struct { + u32 device_type : 2; + u32 reserved : 30; +} __attribute__ ((packed)) mbp_nfc_data; + +typedef struct { + mbp_fw_version_name *fw_version_name; + mbp_mefwcaps *fw_capabilities; + mbp_rom_bist_data *rom_bist_data; + mbp_platform_key *platform_key; + mbp_plat_type *fw_plat_type; + mbp_icc_profile *icc_profile; + mbp_at_state *at_state; + u32 *mfsintegrity; + mbp_plat_time *plat_time; + mbp_nfc_data *nfc_data; +} me_bios_payload; + +struct me_fwcaps { + u32 id; + u8 length; + mbp_mefwcaps caps_sku; + u8 reserved[3]; +} __attribute__ ((packed)); + +void intel_me_hsio_version(uint16_t *version, uint16_t *checksum); + +#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) +/* Defined in me_status.c for both romstage and ramstage */ +void intel_me_status(void); +#else +static inline void intel_me_status(void) { } +#endif + +#endif diff --git a/src/soc/intel/skylake/include/soc/msr.h b/src/soc/intel/skylake/include/soc/msr.h new file mode 100644 index 0000000..707041a --- /dev/null +++ b/src/soc/intel/skylake/include/soc/msr.h @@ -0,0 +1,109 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_MSR_H_ +#define _BROADWELL_MSR_H_ + +#define MSR_PIC_MSG_CONTROL 0x2e +#define CORE_THREAD_COUNT_MSR 0x35 +#define IA32_FEATURE_CONTROL 0x3a +#define CPUID_VMX (1 << 5) +#define CPUID_SMX (1 << 6) +#define MSR_PLATFORM_INFO 0xce +#define PLATFORM_INFO_SET_TDP (1 << 29) +#define MSR_PMG_CST_CONFIG_CONTROL 0xe2 +#define MSR_PMG_IO_CAPTURE_BASE 0xe4 +#define MSR_FEATURE_CONFIG 0x13c +#define SMM_MCA_CAP_MSR 0x17d +#define SMM_CPU_SVRSTR_BIT 57 +#define SMM_CPU_SVRSTR_MASK (1 << (SMM_CPU_SVRSTR_BIT - 32)) +#define MSR_FLEX_RATIO 0x194 +#define FLEX_RATIO_LOCK (1 << 20) +#define FLEX_RATIO_EN (1 << 16) +#define IA32_MISC_ENABLE 0x1a0 +#define MSR_MISC_PWR_MGMT 0x1aa +#define MISC_PWR_MGMT_EIST_HW_DIS (1 << 0) +#define MSR_TURBO_RATIO_LIMIT 0x1ad +#define MSR_TEMPERATURE_TARGET 0x1a2 +#define IA32_PERF_CTL 0x199 +#define IA32_THERM_INTERRUPT 0x19b +#define IA32_ENERGY_PERFORMANCE_BIAS 0x1b0 +#define ENERGY_POLICY_PERFORMANCE 0 +#define ENERGY_POLICY_NORMAL 6 +#define ENERGY_POLICY_POWERSAVE 15 +#define IA32_PACKAGE_THERM_INTERRUPT 0x1b2 +#define EMRRphysBase_MSR 0x1f4 +#define EMRRphysMask_MSR 0x1f5 +#define IA32_PLATFORM_DCA_CAP 0x1f8 +#define MSR_POWER_CTL 0x1fc +#define MSR_LT_LOCK_MEMORY 0x2e7 +#define UNCORE_EMRRphysBase_MSR 0x2f4 +#define UNCORE_EMRRphysMask_MSR 0x2f5 +#define IA32_MC0_STATUS 0x401 +#define SMM_FEATURE_CONTROL_MSR 0x4e0 +#define SMM_CPU_SAVE_EN (1 << 1) + +#define MSR_C_STATE_LATENCY_CONTROL_0 0x60a +#define MSR_C_STATE_LATENCY_CONTROL_1 0x60b +#define MSR_C_STATE_LATENCY_CONTROL_2 0x60c +#define MSR_C_STATE_LATENCY_CONTROL_3 0x633 +#define MSR_C_STATE_LATENCY_CONTROL_4 0x634 +#define MSR_C_STATE_LATENCY_CONTROL_5 0x635 +#define IRTL_VALID (1 << 15) +#define IRTL_1_NS (0 << 10) +#define IRTL_32_NS (1 << 10) +#define IRTL_1024_NS (2 << 10) +#define IRTL_32768_NS (3 << 10) +#define IRTL_1048576_NS (4 << 10) +#define IRTL_33554432_NS (5 << 10) +#define IRTL_RESPONSE_MASK (0x3ff) +#define MSR_COUNTER_24_MHZ 0x637 + +/* long duration in low dword, short duration in high dword */ +#define MSR_PKG_POWER_LIMIT 0x610 +#define PKG_POWER_LIMIT_MASK 0x7fff +#define PKG_POWER_LIMIT_EN (1 << 15) +#define PKG_POWER_LIMIT_CLAMP (1 << 16) +#define PKG_POWER_LIMIT_TIME_SHIFT 17 +#define PKG_POWER_LIMIT_TIME_MASK 0x7f + +#define MSR_VR_CURRENT_CONFIG 0x601 +#define MSR_VR_MISC_CONFIG 0x603 +#define MSR_PKG_POWER_SKU_UNIT 0x606 +#define MSR_PKG_POWER_SKU 0x614 +#define MSR_DDR_RAPL_LIMIT 0x618 +#define MSR_VR_MISC_CONFIG2 0x636 +#define MSR_PP0_POWER_LIMIT 0x638 +#define MSR_PP1_POWER_LIMIT 0x640 + +#define MSR_CONFIG_TDP_NOMINAL 0x648 +#define MSR_CONFIG_TDP_LEVEL1 0x649 +#define MSR_CONFIG_TDP_LEVEL2 0x64a +#define MSR_CONFIG_TDP_CONTROL 0x64b +#define MSR_TURBO_ACTIVATION_RATIO 0x64c + +/* SMM save state MSRs */ +#define SMBASE_MSR 0xc20 +#define IEDBASE_MSR 0xc22 + +/* MTRRcap_MSR bits */ +#define SMRR_SUPPORTED (1<<11) +#define EMRR_SUPPORTED (1<<12) + +#endif diff --git a/src/soc/intel/skylake/include/soc/nvs.h b/src/soc/intel/skylake/include/soc/nvs.h new file mode 100644 index 0000000..0f1e63a --- /dev/null +++ b/src/soc/intel/skylake/include/soc/nvs.h @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_NVS_H_ +#define _BROADWELL_NVS_H_ + +#include <vendorcode/google/chromeos/gnvs.h> +#include <soc/device_nvs.h> + +typedef struct { + /* Miscellaneous */ + u16 osys; /* 0x00 - Operating System */ + u8 smif; /* 0x02 - SMI function call ("TRAP") */ + u8 prm0; /* 0x03 - SMI function call parameter */ + u8 prm1; /* 0x04 - SMI function call parameter */ + u8 scif; /* 0x05 - SCI function call (via _L00) */ + u8 prm2; /* 0x06 - SCI function call parameter */ + u8 prm3; /* 0x07 - SCI function call parameter */ + u8 lckf; /* 0x08 - Global Lock function for EC */ + u8 prm4; /* 0x09 - Lock function parameter */ + u8 prm5; /* 0x0a - Lock function parameter */ + u8 pcnt; /* 0x0b - Processor Count */ + u8 ppcm; /* 0x0c - Max PPC State */ + u8 tmps; /* 0x0d - Temperature Sensor ID */ + u8 tlvl; /* 0x0e - Throttle Level Limit */ + u8 flvl; /* 0x0f - Current FAN Level */ + u8 tcrt; /* 0x10 - Critical Threshold */ + u8 tpsv; /* 0x11 - Passive Threshold */ + u8 tmax; /* 0x12 - CPU Tj_max */ + u8 s5u0; /* 0x13 - Enable USB in S5 */ + u8 s3u0; /* 0x14 - Enable USB in S3 */ + u8 s33g; /* 0x15 - Enable 3G in S3 */ + u8 lids; /* 0x16 - LID State */ + u8 pwrs; /* 0x17 - AC Power State */ + u32 cmem; /* 0x18 - 0x1b - CBMEM TOC */ + u32 cbmc; /* 0x1c - 0x1f - Coreboot Memory Console */ + u64 pm1i; /* 0x20 - 0x27 - PM1 wake status bit */ + u64 gpei; /* 0x28 - 0x2f - GPE wake status bit */ + u8 unused[208]; + + /* ChromeOS specific (0x100 - 0xfff) */ + chromeos_acpi_t chromeos; + + /* Device specific (0x1000) */ + device_nvs_t dev; +} __attribute__((packed)) global_nvs_t; + +void acpi_create_gnvs(global_nvs_t *gnvs); +#ifdef __SMM__ +/* Used in SMM to find the ACPI GNVS address */ +global_nvs_t *smm_get_gnvs(void); +#endif + +#endif diff --git a/src/soc/intel/skylake/include/soc/pch.h b/src/soc/intel/skylake/include/soc/pch.h new file mode 100644 index 0000000..e677215 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/pch.h @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_PCH_H_ +#define _BROADWELL_PCH_H_ + +/* Haswell ULT Pch (LynxPoint-LP) */ +#define PCH_LPT_LP_SAMPLE 0x9c41 +#define PCH_LPT_LP_PREMIUM 0x9c43 +#define PCH_LPT_LP_MAINSTREAM 0x9c45 +#define PCH_LPT_LP_VALUE 0x9c47 + +/* Broadwell PCH (WildatPoint) */ +#define PCH_WPT_HSW_U_SAMPLE 0x9cc1 +#define PCH_WPT_BDW_U_SAMPLE 0x9cc2 +#define PCH_WPT_BDW_U_PREMIUM 0x9cc3 +#define PCH_WPT_BDW_U_BASE 0x9cc5 +#define PCH_WPT_BDW_Y_SAMPLE 0x9cc6 +#define PCH_WPT_BDW_Y_PREMIUM 0x9cc7 +#define PCH_WPT_BDW_Y_BASE 0x9cc9 +#define PCH_WPT_BDW_H 0x9ccb + +/* Power Management Control and Status */ +#define PCH_PCS 0x84 +#define PCH_PCS_PS_D3HOT 3 + +u8 pch_revision(void); +u16 pch_type(void); +int pch_is_wpt(void); +int pch_is_wpt_ulx(void); +u32 pch_read_soft_strap(int id); +void pch_log_state(void); +void pch_disable_devfn(device_t dev); + +#endif diff --git a/src/soc/intel/skylake/include/soc/pci_devs.h b/src/soc/intel/skylake/include/soc/pci_devs.h new file mode 100644 index 0000000..76e3a68 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/pci_devs.h @@ -0,0 +1,119 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_PCI_DEVS_H_ +#define _BROADWELL_PCI_DEVS_H_ + +#define _SA_DEVFN(slot) PCI_DEVFN(SA_DEV_SLOT_ ## slot, 0) +#define _PCH_DEVFN(slot,func) PCI_DEVFN(PCH_DEV_SLOT_ ## slot, func) + +#if defined(__PRE_RAM__) || defined(__SMM__) || defined(__ROMCC__) +#include <arch/io.h> +#define _SA_DEV(slot) PCI_DEV(0, SA_DEV_SLOT_ ## slot, 0) +#define _PCH_DEV(slot,func) PCI_DEV(0, PCH_DEV_SLOT_ ## slot, func) +#else +#include <device/device.h> +#include <device/pci_def.h> +#define _SA_DEV(slot) dev_find_slot(0, _SA_DEVFN(slot)) +#define _PCH_DEV(slot,func) dev_find_slot(0, _PCH_DEVFN(slot, func)) +#endif + +/* System Agent Devices */ + +#define SA_DEV_SLOT_ROOT 0x00 +#define SA_DEVFN_ROOT _SA_DEVFN(ROOT) +#define SA_DEV_ROOT _SA_DEV(ROOT) + +#define SA_DEV_SLOT_IGD 0x02 +#define SA_DEVFN_IGD _SA_DEVFN(IGD) +#define SA_DEV_IGD _SA_DEV(IGD) + +#define SA_DEV_SLOT_MINIHD 0x03 +#define SA_DEVFN_MINIHD _SA_DEVFN(MINIHD) +#define SA_DEV_MINIHD _SA_DEV(MINIHD) + +/* PCH Devices */ + +#define PCH_DEV_SLOT_ADSP 0x13 +#define PCH_DEVFN_ADSP _PCH_DEVFN(ADSP, 0) +#define PCH_DEV_ADSP _PCH_DEV(ADSP, 0) + +#define PCH_DEV_SLOT_XHCI 0x14 +#define PCH_DEVFN_XHCI _PCH_DEVFN(XHCI, 0) +#define PCH_DEV_XHCI _PCH_DEV(XHCI, 0) + +#define PCH_DEV_SLOT_SIO 0x15 +#define PCH_DEV_SDMA _PCH_DEV(SIO, 0) +#define PCH_DEV_I2C0 _PCH_DEV(SIO, 1) +#define PCH_DEV_I2C1 _PCH_DEV(SIO, 2) +#define PCH_DEV_SPI0 _PCH_DEV(SIO, 3) +#define PCH_DEV_SPI1 _PCH_DEV(SIO, 4) +#define PCH_DEV_UART0 _PCH_DEV(SIO, 5) +#define PCH_DEV_UART1 _PCH_DEV(SIO, 6) +#define PCH_DEVFN_SDMA _PCH_DEVFN(SIO, 0) +#define PCH_DEVFN_I2C0 _PCH_DEVFN(SIO, 1) +#define PCH_DEVFN_I2C1 _PCH_DEVFN(SIO, 2) +#define PCH_DEVFN_SPI0 _PCH_DEVFN(SIO, 3) +#define PCH_DEVFN_SPI1 _PCH_DEVFN(SIO, 4) +#define PCH_DEVFN_UART0 _PCH_DEVFN(SIO, 5) +#define PCH_DEVFN_UART1 _PCH_DEVFN(SIO, 6) + +#define PCH_DEV_SLOT_ME 0x16 +#define PCH_DEVFN_ME _PCH_DEVFN(ME, 0) +#define PCH_DEVFN_ME_2 _PCH_DEVFN(ME, 1) +#define PCH_DEVFN_ME_IDER _PCH_DEVFN(ME, 2) +#define PCH_DEVFN_ME_KT _PCH_DEVFN(ME, 3) +#define PCH_DEV_ME _PCH_DEV(ME, 0) +#define PCH_DEV_ME_2 _PCH_DEV(ME, 1) +#define PCH_DEV_ME_IDER _PCH_DEV(ME, 2) +#define PCH_DEV_ME_KT _PCH_DEV(ME, 3) + +#define PCH_DEV_SLOT_SDIO 0x17 +#define PCH_DEVFN_SDIO _PCH_DEVFN(SDIO, 0) +#define PCH_DEV_SDIO _PCH_DEV(SDIO, 0) + +#define PCH_DEV_SLOT_GBE 0x19 +#define PCH_DEVFN_GBE _PCH_DEVFN(GBE, 0) +#define PCH_DEV_GBE _PCH_DEV(GBE, 0) + +#define PCH_DEV_SLOT_HDA 0x1b +#define PCH_DEVFN_HDA _PCH_DEVFN(HDA, 0) +#define PCH_DEV_HDA _PCH_DEV(HDA, 0) + +#define PCH_DEV_SLOT_PCIE 0x1c + +#define PCH_DEV_SLOT_EHCI 0x1d +#define PCH_DEVFN_EHCI _PCH_DEVFN(EHCI, 0) +#define PCH_DEV_EHCI _PCH_DEV(EHCI, 0) + +#define PCH_DEV_SLOT_LPC 0x1f +#define PCH_DEVFN_LPC _PCH_DEVFN(LPC, 0) +#define PCH_DEVFN_IDE _PCH_DEVFN(LPC, 1) +#define PCH_DEVFN_SATA _PCH_DEVFN(LPC, 2) +#define PCH_DEVFN_SMBUS _PCH_DEVFN(LPC, 3) +#define PCH_DEVFN_SATA2 _PCH_DEVFN(LPC, 5) +#define PCH_DEVFN_THERMAL _PCH_DEVFN(LPC, 6) +#define PCH_DEV_LPC _PCH_DEV(LPC, 0) +#define PCH_DEV_IDE _PCH_DEV(LPC, 1) +#define PCH_DEV_SATA _PCH_DEV(LPC, 2) +#define PCH_DEV_SMBUS _PCH_DEV(LPC, 3) +#define PCH_DEV_SATA2 _PCH_DEV(LPC, 5) +#define PCH_DEV_THERMAL _PCH_DEV(LPC, 6) + +#endif diff --git a/src/soc/intel/skylake/include/soc/pei_data.h b/src/soc/intel/skylake/include/soc/pei_data.h new file mode 100644 index 0000000..e614718 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/pei_data.h @@ -0,0 +1,199 @@ +/* + * Broadwell UEFI PEI wrapper + * + * Copyright (C) 2014 Google Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Google Inc. nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL GOOGLE INC BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef PEI_DATA_H +#define PEI_DATA_H + +#include <types.h> +#include <memory_info.h> + +#define PEI_VERSION 22 + +#define ABI_X86 __attribute__((regparm(0))) + +typedef void ABI_X86 (*tx_byte_func)(unsigned char byte); + +enum board_type { + BOARD_TYPE_CRB_MOBILE = 0, /* CRB Mobile */ + BOARD_TYPE_CRB_DESKTOP, /* CRB Desktop */ + BOARD_TYPE_USER1, /* SV mobile */ + BOARD_TYPE_USER2, /* SV desktop */ + BOARD_TYPE_USER3, /* SV server */ + BOARD_TYPE_ULT, /* ULT */ + BOARD_TYPE_CRB_EMBDEDDED, /* CRB Embedded */ + BOARD_TYPE_UNKNOWN, +}; + +#define MAX_USB2_PORTS 14 +#define MAX_USB3_PORTS 6 +#define USB_OC_PIN_SKIP 8 + +enum usb2_port_location { + USB_PORT_BACK_PANEL = 0, + USB_PORT_FRONT_PANEL, + USB_PORT_DOCK, + USB_PORT_MINI_PCIE, + USB_PORT_FLEX, + USB_PORT_INTERNAL, + USB_PORT_SKIP, + USB_PORT_NGFF_DEVICE_DOWN, +}; + +struct usb2_port_setting { + /* + * Usb Port Length: + * [16:4] = length in inches in octal format + * [3:0] = decimal point + */ + uint16_t length; + uint8_t enable; + uint8_t oc_pin; + uint8_t location; +} __attribute__((packed)); + +struct usb3_port_setting { + uint8_t enable; + uint8_t oc_pin; + /* + * Set to 0 if trace length is > 5 inches + * Set to 1 if trace length is <= 5 inches + */ + uint8_t fixed_eq; +} __attribute__((packed)); + +struct pei_data +{ + uint32_t pei_version; + + enum board_type board_type; + int boot_mode; + int ec_present; + int usbdebug; + + /* Base addresses */ + uint32_t pciexbar; + uint16_t smbusbar; + uint32_t xhcibar; + uint32_t ehcibar; + uint32_t gttbar; + uint32_t rcba; + uint32_t pmbase; + uint32_t gpiobase; + uint32_t temp_mmio_base; + uint32_t tseg_size; + + /* + * 0 = leave channel enabled + * 1 = disable dimm 0 on channel + * 2 = disable dimm 1 on channel + * 3 = disable dimm 0+1 on channel + */ + int dimm_channel0_disabled; + int dimm_channel1_disabled; + /* Set to 0 for memory down */ + uint8_t spd_addresses[4]; + /* Enable 2x Refresh Mode */ + int ddr_refresh_2x; + /* DQ pins are interleaved on board */ + int dq_pins_interleaved; + /* Limit DDR3 frequency */ + int max_ddr3_freq; + /* Disable self refresh */ + int disable_self_refresh; + /* Disable cmd power/CKEPD */ + int disable_cmd_pwr; + + /* USB port configuration */ + struct usb2_port_setting usb2_ports[MAX_USB2_PORTS]; + struct usb3_port_setting usb3_ports[MAX_USB3_PORTS]; + + /* + * USB3 board specific PHY tuning + */ + + /* Valid range: 0x69 - 0x80 */ + uint8_t usb3_txout_volt_dn_amp_adj[MAX_USB3_PORTS]; + /* Valid range: 0x80 - 0x9c */ + uint8_t usb3_txout_imp_sc_volt_amp_adj[MAX_USB3_PORTS]; + /* Valid range: 0x39 - 0x80 */ + uint8_t usb3_txout_de_emp_adj[MAX_USB3_PORTS]; + /* Valid range: 0x3d - 0x4a */ + uint8_t usb3_txout_imp_adj_volt_amp[MAX_USB3_PORTS]; + + /* Console output function */ + tx_byte_func tx_byte; + + /* + * DIMM SPD data for memory down configurations + * [CHANNEL][SLOT][SPD] + */ + uint8_t spd_data[2][2][512]; + + /* + * LPDDR3 DQ byte map + * [CHANNEL][ITERATION][2] + * + * Maps which PI clocks are used by what LPDDR DQ Bytes (from CPU side) + * DQByteMap[0] - ClkDQByteMap: + * - If clock is per rank, program to [0xFF, 0xFF] + * - If clock is shared by 2 ranks, program to [0xFF, 0] or [0, 0xFF] + * - If clock is shared by 2 ranks but does not go to all bytes, + * Entry[i] defines which DQ bytes Group i services + * DQByteMap[1] - CmdNDQByteMap: [0] is CmdN/CAA and [1] is CmdN/CAB + * DQByteMap[2] - CmdSDQByteMap: [0] is CmdS/CAA and [1] is CmdS/CAB + * DQByteMap[3] - CkeDQByteMap : [0] is CKE /CAA and [1] is CKE /CAB + * For DDR, DQByteMap[3:1] = [0xFF, 0] + * DQByteMap[4] - CtlDQByteMap : Always program to [0xFF, 0] + * since we have 1 CTL / rank + * DQByteMap[5] - CmdVDQByteMap: Always program to [0xFF, 0] + * since we have 1 CA Vref + */ + uint8_t dq_map[2][6][2]; + + /* + * LPDDR3 Map from CPU DQS pins to SDRAM DQS pins + * [CHANNEL][MAX_BYTES] + */ + uint8_t dqs_map[2][8]; + + /* Data read from flash and passed into MRC */ + const void *saved_data; + int saved_data_size; + + /* Disable use of saved data (can be set by mainboard) */ + int disable_saved_data; + + /* Data from MRC that should be saved to flash */ + void *data_to_save; + int data_to_save_size; + struct memory_info meminfo; +} __attribute__((packed)); + +typedef struct pei_data PEI_DATA; + +#endif diff --git a/src/soc/intel/skylake/include/soc/pei_wrapper.h b/src/soc/intel/skylake/include/soc/pei_wrapper.h new file mode 100644 index 0000000..3ade4ff --- /dev/null +++ b/src/soc/intel/skylake/include/soc/pei_wrapper.h @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_PEI_WRAPPER_H_ +#define _BROADWELL_PEI_WRAPPER_H_ + +#include <soc/pei_data.h> + +typedef int ABI_X86 (*pei_wrapper_entry_t)(struct pei_data *pei_data); + +static inline void pei_data_usb2_port(struct pei_data *pei_data, int port, + uint16_t length, uint8_t enable, + uint8_t oc_pin, uint8_t location) +{ + pei_data->usb2_ports[port].length = length; + pei_data->usb2_ports[port].enable = enable; + pei_data->usb2_ports[port].oc_pin = oc_pin; + pei_data->usb2_ports[port].location = location; +} + +static inline void pei_data_usb3_port(struct pei_data *pei_data, int port, + uint8_t enable, uint8_t oc_pin, + uint8_t fixed_eq) +{ + pei_data->usb3_ports[port].enable = enable; + pei_data->usb3_ports[port].oc_pin = oc_pin; + pei_data->usb3_ports[port].fixed_eq = fixed_eq; +} + +void broadwell_fill_pei_data(struct pei_data *pei_data); +void mainboard_fill_pei_data(struct pei_data *pei_data); + +#endif diff --git a/src/soc/intel/skylake/include/soc/pm.h b/src/soc/intel/skylake/include/soc/pm.h new file mode 100644 index 0000000..54fc4a7 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/pm.h @@ -0,0 +1,172 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_PM_H_ +#define _BROADWELL_PM_H_ + +/* ACPI_BASE_ADDRESS / PMBASE */ + +#define PM1_STS 0x00 +#define WAK_STS (1 << 15) +#define PCIEXPWAK_STS (1 << 14) +#define PRBTNOR_STS (1 << 11) +#define RTC_STS (1 << 10) +#define PWRBTN_STS (1 << 8) +#define GBL_STS (1 << 5) +#define BM_STS (1 << 4) +#define TMROF_STS (1 << 0) +#define PM1_EN 0x02 +#define PCIEXPWAK_DIS (1 << 14) +#define RTC_EN (1 << 10) +#define PWRBTN_EN (1 << 8) +#define GBL_EN (1 << 5) +#define TMROF_EN (1 << 0) +#define PM1_CNT 0x04 +#define SLP_EN (1 << 13) +#define SLP_TYP (7 << 10) +#define SLP_TYP_SHIFT 10 +#define SLP_TYP_S0 0 +#define SLP_TYP_S1 1 +#define SLP_TYP_S3 5 +#define SLP_TYP_S4 6 +#define SLP_TYP_S5 7 +#define GBL_RLS (1 << 2) +#define BM_RLD (1 << 1) +#define SCI_EN (1 << 0) +#define PM1_TMR 0x08 +#define SMI_EN 0x30 +#define XHCI_SMI_EN (1 << 31) +#define ME_SMI_EN (1 << 30) +#define GPIO_UNLOCK_SMI_EN (1 << 27) +#define INTEL_USB2_EN (1 << 18) +#define LEGACY_USB2_EN (1 << 17) +#define PERIODIC_EN (1 << 14) +#define TCO_EN (1 << 13) +#define MCSMI_EN (1 << 11) +#define BIOS_RLS (1 << 7) +#define SWSMI_TMR_EN (1 << 6) +#define APMC_EN (1 << 5) +#define SLP_SMI_EN (1 << 4) +#define LEGACY_USB_EN (1 << 3) +#define BIOS_EN (1 << 2) +#define EOS (1 << 1) +#define GBL_SMI_EN (1 << 0) +#define SMI_STS 0x34 +#define UPWRC 0x3c +#define UPWRC_WS (1 << 8) +#define UPWRC_WE (1 << 1) +#define UPWRC_SMI (1 << 0) +#define GPE_CNTL 0x42 +#define SWGPE_CTRL (1 << 1) +#define DEVACT_STS 0x44 +#define PM2_CNT 0x50 +#define TCO1_CNT 0x60 +#define TCO_TMR_HLT (1 << 11) +#define TCO1_STS 0x64 +#define DMISCI_STS (1 << 9) +#define TCO2_STS 0x66 +#define TCO2_STS_SECOND_TO (1 << 1) + +#define GPE0_REG_MAX 4 +#define GPE0_REG_SIZE 32 +#define GPE0_STS(x) (0x80 + (x * 4)) +#define GPE_31_0 0 /* 0x80/0x90 = GPE[31:0] */ +#define GPE_63_32 1 /* 0x84/0x94 = GPE[63:32] */ +#define GPE_94_64 2 /* 0x88/0x98 = GPE[94:64] */ +#define GPE_STD 3 /* 0x8c/0x9c = Standard GPE */ +#define WADT_STS (1 << 18) +#define GP27_STS (1 << 16) +#define PME_B0_STS (1 << 13) +#define ME_SCI_STS (1 << 12) +#define PME_STS (1 << 11) +#define BATLOW_STS (1 << 10) +#define PCI_EXP_STS (1 << 9) +#define SMB_WAK_STS (1 << 7) +#define TCOSCI_STS (1 << 6) +#define SWGPE_STS (1 << 2) +#define HOT_PLUG_STS (1 << 1) +#define GPE0_EN(x) (0x90 + (x * 4)) +#define WADT_en (1 << 18) +#define GP27_EN (1 << 16) +#define PME_B0_EN (1 << 13) +#define ME_SCI_EN (1 << 12) +#define PME_EN (1 << 11) +#define BATLOW_EN (1 << 10) +#define PCI_EXP_EN (1 << 9) +#define TCOSCI_EN (1 << 6) +#define SWGPE_EN (1 << 2) +#define HOT_PLUG_EN (1 << 1) + +#define MAINBOARD_POWER_OFF 0 +#define MAINBOARD_POWER_ON 1 +#define MAINBOARD_POWER_KEEP 2 + +#define SLEEP_STATE_S0 0 +#define SLEEP_STATE_S3 3 +#define SLEEP_STATE_S5 5 + +struct chipset_power_state { + uint16_t pm1_sts; + uint16_t pm1_en; + uint32_t pm1_cnt; + uint16_t tco1_sts; + uint16_t tco2_sts; + uint32_t gpe0_sts[4]; + uint32_t gpe0_en[4]; + uint16_t gen_pmcon1; + uint16_t gen_pmcon2; + uint16_t gen_pmcon3; + int prev_sleep_state; + uint16_t hsio_version; + uint16_t hsio_checksum; +}; + +/* PM1_CNT */ +void enable_pm1_control(uint32_t mask); +void disable_pm1_control(uint32_t mask); + +/* PM1 */ +uint16_t clear_pm1_status(void); +void enable_pm1(uint16_t events); +uint32_t clear_smi_status(void); + +/* SMI */ +void enable_smi(uint32_t mask); +void disable_smi(uint32_t mask); + +/* ALT_GP_SMI */ +uint32_t clear_alt_smi_status(void); +void enable_alt_smi(uint32_t mask); + +/* TCO */ +uint32_t clear_tco_status(void); +void enable_tco_sci(void); + +/* GPE0 */ +uint32_t clear_gpe_status(void); +void clear_gpe_enable(void); +void enable_all_gpe(uint32_t set1, uint32_t set2, uint32_t set3, uint32_t set4); +void disable_all_gpe(void); +void enable_gpe(uint32_t mask); +void disable_gpe(uint32_t mask); + +/* Return the selected ACPI SCI IRQ */ +int acpi_sci_irq(void); + +#endif diff --git a/src/soc/intel/skylake/include/soc/ramstage.h b/src/soc/intel/skylake/include/soc/ramstage.h new file mode 100644 index 0000000..9242aa9 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/ramstage.h @@ -0,0 +1,38 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_RAMSTAGE_H_ +#define _BROADWELL_RAMSTAGE_H_ + +#include <device/device.h> +#include <soc/intel/broadwell/chip.h> + +void broadwell_init_pre_device(void *chip_info); +void broadwell_init_cpus(device_t dev); +void broadwell_pch_enable_dev(device_t dev); + +#if CONFIG_HAVE_REFCODE_BLOB +void broadwell_run_reference_code(void); +#else +static inline void broadwell_run_reference_code(void) { } +#endif + +extern struct pci_operations broadwell_pci_ops; + +#endif diff --git a/src/soc/intel/skylake/include/soc/rcba.h b/src/soc/intel/skylake/include/soc/rcba.h new file mode 100644 index 0000000..2c40d07 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/rcba.h @@ -0,0 +1,178 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_RCBA_H_ +#define _BROADWELL_RCBA_H_ + +#include <soc/iomap.h> + +#define RCBA8(x) *((volatile u8 *)(RCBA_BASE_ADDRESS + x)) +#define RCBA16(x) *((volatile u16 *)(RCBA_BASE_ADDRESS + x)) +#define RCBA32(x) *((volatile u32 *)(RCBA_BASE_ADDRESS + x)) + +#define RCBA_AND_OR(bits, x, and, or) \ + RCBA##bits(x) = ((RCBA##bits(x) & (and)) | (or)) +#define RCBA8_AND_OR(x, and, or) RCBA_AND_OR(8, x, and, or) +#define RCBA16_AND_OR(x, and, or) RCBA_AND_OR(16, x, and, or) +#define RCBA32_AND_OR(x, and, or) RCBA_AND_OR(32, x, and, or) +#define RCBA32_OR(x, or) RCBA_AND_OR(32, x, ~0UL, or) + +#define RPC 0x0400 /* 32bit */ +#define RPFN 0x0404 /* 32bit */ + +/* Root Port configuration space hide */ +#define RPFN_HIDE(port) (1 << (((port) * 4) + 3)) +/* Get the function number assigned to a Root Port */ +#define RPFN_FNGET(reg,port) (((reg) >> ((port) * 4)) & 7) +/* Set the function number for a Root Port */ +#define RPFN_FNSET(port,func) (((func) & 7) << ((port) * 4)) +/* Root Port function number mask */ +#define RPFN_FNMASK(port) (7 << ((port) * 4)) + +#define NOINT 0 +#define INTA 1 +#define INTB 2 +#define INTC 3 +#define INTD 4 + +#define DIR_IDR 12 /* Interrupt D Pin Offset */ +#define DIR_ICR 8 /* Interrupt C Pin Offset */ +#define DIR_IBR 4 /* Interrupt B Pin Offset */ +#define DIR_IAR 0 /* Interrupt A Pin Offset */ + +#define PIRQA 0 +#define PIRQB 1 +#define PIRQC 2 +#define PIRQD 3 +#define PIRQE 4 +#define PIRQF 5 +#define PIRQG 6 +#define PIRQH 7 + +/* IO Buffer Programming */ +#define IOBPIRI 0x2330 +#define IOBPD 0x2334 +#define IOBPS 0x2338 +#define IOBPS_READY 0x0001 +#define IOBPS_TX_MASK 0x0006 +#define IOBPS_MASK 0xff00 +#define IOBPS_READ 0x0600 +#define IOBPS_WRITE 0x0700 +#define IOBPU 0x233a +#define IOBPU_MAGIC 0xf000 +#define IOBP_PCICFG_READ 0x0400 +#define IOBP_PCICFG_WRITE 0x0500 + +#define D31IP 0x3100 /* 32bit */ +#define D31IP_TTIP 24 /* Thermal Throttle Pin */ +#define D31IP_SIP2 20 /* SATA Pin 2 */ +#define D31IP_SMIP 12 /* SMBUS Pin */ +#define D31IP_SIP 8 /* SATA Pin */ +#define D30IP 0x3104 /* 32bit */ +#define D30IP_PIP 0 /* PCI Bridge Pin */ +#define D29IP 0x3108 /* 32bit */ +#define D29IP_E1P 0 /* EHCI #1 Pin */ +#define D28IP 0x310c /* 32bit */ +#define D28IP_P8IP 28 /* PCI Express Port 8 */ +#define D28IP_P7IP 24 /* PCI Express Port 7 */ +#define D28IP_P6IP 20 /* PCI Express Port 6 */ +#define D28IP_P5IP 16 /* PCI Express Port 5 */ +#define D28IP_P4IP 12 /* PCI Express Port 4 */ +#define D28IP_P3IP 8 /* PCI Express Port 3 */ +#define D28IP_P2IP 4 /* PCI Express Port 2 */ +#define D28IP_P1IP 0 /* PCI Express Port 1 */ +#define D27IP 0x3110 /* 32bit */ +#define D27IP_ZIP 0 /* HD Audio Pin */ +#define D26IP 0x3114 /* 32bit */ +#define D26IP_E2P 0 /* EHCI #2 Pin */ +#define D25IP 0x3118 /* 32bit */ +#define D25IP_LIP 0 /* GbE LAN Pin */ +#define D22IP 0x3124 /* 32bit */ +#define D22IP_KTIP 12 /* KT Pin */ +#define D22IP_IDERIP 8 /* IDE-R Pin */ +#define D22IP_MEI2IP 4 /* MEI #2 Pin */ +#define D22IP_MEI1IP 0 /* MEI #1 Pin */ +#define D20IP 0x3128 /* 32bit */ +#define D20IP_XHCI 0 /* XHCI Pin */ +#define D31IR 0x3140 /* 16bit */ +#define D30IR 0x3142 /* 16bit */ +#define D29IR 0x3144 /* 16bit */ +#define D28IR 0x3146 /* 16bit */ +#define D27IR 0x3148 /* 16bit */ +#define D26IR 0x314c /* 16bit */ +#define D25IR 0x3150 /* 16bit */ +#define D23IR 0x3158 /* 16bit */ +#define D22IR 0x315c /* 16bit */ +#define D20IR 0x3160 /* 16bit */ +#define D21IR 0x3164 /* 16bit */ +#define D19IR 0x3168 /* 16bit */ +#define ACPIIRQEN 0x31e0 /* 32bit */ +#define OIC 0x31fe /* 16bit */ +#define DEEP_S3_POL 0x3328 /* 32bit */ +#define DEEP_S3_EN_AC (1 << 0) +#define DEEP_S3_EN_DC (1 << 1) +#define DEEP_S5_POL 0x3330 /* 32bit */ +#define DEEP_S5_EN_AC (1 << 14) +#define DEEP_S5_EN_DC (1 << 15) +#define DEEP_SX_CONFIG 0x3334 /* 32bit */ +#define DEEP_SX_WAKE_PIN_EN (1 << 2) +#define DEEP_SX_ACPRESENT_PD (1 << 1) +#define DEEP_SX_GP27_PIN_EN (1 << 0) +#define PMSYNC_CONFIG 0x33c4 /* 32bit */ +#define PMSYNC_CONFIG2 0x33cc /* 32bit */ +#define SOFT_RESET_CTRL 0x38f4 +#define SOFT_RESET_DATA 0x38f8 + +#define DIR_ROUTE(a,b,c,d) \ + (((d) << DIR_IDR) | ((c) << DIR_ICR) | \ + ((b) << DIR_IBR) | ((a) << DIR_IAR)) + +#define RC 0x3400 /* 32bit */ +#define HPTC 0x3404 /* 32bit */ +#define GCS 0x3410 /* 32bit */ +#define BUC 0x3414 /* 32bit */ +#define PCH_DISABLE_GBE (1 << 5) +#define FD 0x3418 /* 32bit */ +#define FDSW 0x3420 /* 8bit */ +#define DISPBDF 0x3424 /* 16bit */ +#define FD2 0x3428 /* 32bit */ +#define CG 0x341c /* 32bit */ + +/* Function Disable 1 RCBA 0x3418 */ +#define PCH_DISABLE_ALWAYS (1 << 0) +#define PCH_DISABLE_ADSPD (1 << 1) +#define PCH_DISABLE_SATA1 (1 << 2) +#define PCH_DISABLE_SMBUS (1 << 3) +#define PCH_DISABLE_HD_AUDIO (1 << 4) +#define PCH_DISABLE_EHCI2 (1 << 13) +#define PCH_DISABLE_LPC (1 << 14) +#define PCH_DISABLE_EHCI1 (1 << 15) +#define PCH_DISABLE_PCIE(x) (1 << (16 + x)) +#define PCH_DISABLE_THERMAL (1 << 24) +#define PCH_DISABLE_SATA2 (1 << 25) +#define PCH_DISABLE_XHCI (1 << 27) + +/* Function Disable 2 RCBA 0x3428 */ +#define PCH_DISABLE_KT (1 << 4) +#define PCH_DISABLE_IDER (1 << 3) +#define PCH_DISABLE_MEI2 (1 << 2) +#define PCH_DISABLE_MEI1 (1 << 1) +#define PCH_ENABLE_DBDF (1 << 0) + +#endif diff --git a/src/soc/intel/skylake/include/soc/reset.h b/src/soc/intel/skylake/include/soc/reset.h new file mode 100644 index 0000000..6f21181 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/reset.h @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_RESET_H_ +#define _BROADWELL_RESET_H_ + +void reset_system(void); + +#endif diff --git a/src/soc/intel/skylake/include/soc/romstage.h b/src/soc/intel/skylake/include/soc/romstage.h new file mode 100644 index 0000000..b636223 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/romstage.h @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_ROMSTAGE_H_ +#define _BROADWELL_ROMSTAGE_H_ + +#include <stdint.h> +#include <arch/cpu.h> + +struct chipset_power_state; +struct pei_data; +struct romstage_params { + unsigned long bist; + struct chipset_power_state *power_state; + struct pei_data *pei_data; +}; + +void mainboard_romstage_entry(struct romstage_params *params); +void romstage_common(struct romstage_params *params); +void *asmlinkage romstage_main(unsigned long bist, uint32_t tsc_lo, + uint32_t tsc_high); +void asmlinkage romstage_after_car(void); +void raminit(struct pei_data *pei_data); +void *setup_stack_and_mttrs(void); + +struct chipset_power_state; +struct chipset_power_state *fill_power_state(void); +void report_platform_info(void); +void report_memory_config(void); + +void set_max_freq(void); + +void systemagent_early_init(void); +void pch_early_init(void); +void pch_uart_init(void); +void intel_early_me_status(void); + +void enable_smbus(void); +int smbus_read_byte(unsigned device, unsigned address); + +int early_spi_read(u32 offset, u32 size, u8 *buffer); +int early_spi_read_wpsr(u8 *sr); + +void mainboard_pre_console_init(void); +#endif diff --git a/src/soc/intel/skylake/include/soc/sata.h b/src/soc/intel/skylake/include/soc/sata.h new file mode 100644 index 0000000..73e7b31 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/sata.h @@ -0,0 +1,89 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_SATA_H_ +#define _BROADWELL_SATA_H_ + +#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ +#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ +#define SATA_SP 0xd0 /* Scratchpad */ + +/* SATA IOBP Registers */ +#define SATA_IOBP_SP0_SECRT88 0xea002688 +#define SATA_IOBP_SP1_SECRT88 0xea002488 + +#define SATA_SECRT88_VADJ_MASK 0xff +#define SATA_SECRT88_VADJ_SHIFT 16 + +#define SATA_IOBP_SP0DTLE_DATA 0xea002550 +#define SATA_IOBP_SP0DTLE_EDGE 0xea002554 +#define SATA_IOBP_SP1DTLE_DATA 0xea002750 +#define SATA_IOBP_SP1DTLE_EDGE 0xea002754 + +#define SATA_DTLE_MASK 0xF +#define SATA_DTLE_DATA_SHIFT 24 +#define SATA_DTLE_EDGE_SHIFT 16 + +/* PCI Configuration Space (D31:F1): IDE */ +#define INTR_LN 0x3c +#define IDE_TIM_PRI 0x40 /* IDE timings, primary */ +#define IDE_DECODE_ENABLE (1 << 15) +#define IDE_SITRE (1 << 14) +#define IDE_ISP_5_CLOCKS (0 << 12) +#define IDE_ISP_4_CLOCKS (1 << 12) +#define IDE_ISP_3_CLOCKS (2 << 12) +#define IDE_RCT_4_CLOCKS (0 << 8) +#define IDE_RCT_3_CLOCKS (1 << 8) +#define IDE_RCT_2_CLOCKS (2 << 8) +#define IDE_RCT_1_CLOCKS (3 << 8) +#define IDE_DTE1 (1 << 7) +#define IDE_PPE1 (1 << 6) +#define IDE_IE1 (1 << 5) +#define IDE_TIME1 (1 << 4) +#define IDE_DTE0 (1 << 3) +#define IDE_PPE0 (1 << 2) +#define IDE_IE0 (1 << 1) +#define IDE_TIME0 (1 << 0) +#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ + +#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */ +#define IDE_SSDE1 (1 << 3) +#define IDE_SSDE0 (1 << 2) +#define IDE_PSDE1 (1 << 1) +#define IDE_PSDE0 (1 << 0) + +#define IDE_SDMA_TIM 0x4a + +#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */ +#define SIG_MODE_SEC_NORMAL (0 << 18) +#define SIG_MODE_SEC_TRISTATE (1 << 18) +#define SIG_MODE_SEC_DRIVELOW (2 << 18) +#define SIG_MODE_PRI_NORMAL (0 << 16) +#define SIG_MODE_PRI_TRISTATE (1 << 16) +#define SIG_MODE_PRI_DRIVELOW (2 << 16) +#define FAST_SCB1 (1 << 15) +#define FAST_SCB0 (1 << 14) +#define FAST_PCB1 (1 << 13) +#define FAST_PCB0 (1 << 12) +#define SCB1 (1 << 3) +#define SCB0 (1 << 2) +#define PCB1 (1 << 1) +#define PCB0 (1 << 0) + +#endif diff --git a/src/soc/intel/skylake/include/soc/serialio.h b/src/soc/intel/skylake/include/soc/serialio.h new file mode 100644 index 0000000..2fd6dca --- /dev/null +++ b/src/soc/intel/skylake/include/soc/serialio.h @@ -0,0 +1,94 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_SERIALIO_H_ +#define _BROADWELL_SERIALIO_H_ + +/* Serial IO IOBP Registers */ +#define SIO_IOBP_PORTCTRL0 0xcb000000 /* SDIO D23:F0 */ +#define SIO_IOBP_PORTCTRL0_ACPI_IRQ_EN (1 << 5) +#define SIO_IOBP_PORTCTRL0_PCI_CONF_DIS (1 << 4) +#define SIO_IOBP_PORTCTRL1 0xcb000014 /* SDIO D23:F0 */ +#define SIO_IOBP_PORTCTRL1_SNOOP_SELECT(x) (((x) & 3) << 13) +#define SIO_IOBP_GPIODF 0xcb000154 +#define SIO_IOBP_GPIODF_SDIO_IDLE_DET_EN (1 << 4) +#define SIO_IOBP_GPIODF_DMA_IDLE_DET_EN (1 << 3) +#define SIO_IOBP_GPIODF_UART_IDLE_DET_EN (1 << 2) +#define SIO_IOBP_GPIODF_I2C_IDLE_DET_EN (1 << 1) +#define SIO_IOBP_GPIODF_SPI_IDLE_DET_EN (1 << 0) +#define SIO_IOBP_GPIODF_UART0_BYTE_ACCESS (1 << 10) +#define SIO_IOBP_GPIODF_UART1_BYTE_ACCESS (1 << 11) +#define SIO_IOBP_PORTCTRL2 0xcb000240 /* DMA D21:F0 */ +#define SIO_IOBP_PORTCTRL3 0xcb000248 /* I2C0 D21:F1 */ +#define SIO_IOBP_PORTCTRL4 0xcb000250 /* I2C1 D21:F2 */ +#define SIO_IOBP_PORTCTRL5 0xcb000258 /* SPI0 D21:F3 */ +#define SIO_IOBP_PORTCTRL6 0xcb000260 /* SPI1 D21:F4 */ +#define SIO_IOBP_PORTCTRL7 0xcb000268 /* UART0 D21:F5 */ +#define SIO_IOBP_PORTCTRL8 0xcb000270 /* UART1 D21:F6 */ +#define SIO_IOBP_PORTCTRLX(x) (0xcb000240 + ((x) * 8)) +/* PORTCTRL 2-8 have the same layout */ +#define SIO_IOBP_PORTCTRL_ACPI_IRQ_EN (1 << 21) +#define SIO_IOBP_PORTCTRL_PCI_CONF_DIS (1 << 20) +#define SIO_IOBP_PORTCTRL_SNOOP_SELECT(x) (((x) & 3) << 18) +#define SIO_IOBP_PORTCTRL_INT_PIN(x) (((x) & 0xf) << 2) +#define SIO_IOBP_PORTCTRL_PM_CAP_PRSNT (1 << 1) +#define SIO_IOBP_FUNCDIS0 0xce00aa07 /* DMA D21:F0 */ +#define SIO_IOBP_FUNCDIS1 0xce00aa47 /* I2C0 D21:F1 */ +#define SIO_IOBP_FUNCDIS2 0xce00aa87 /* I2C1 D21:F2 */ +#define SIO_IOBP_FUNCDIS3 0xce00aac7 /* SPI0 D21:F3 */ +#define SIO_IOBP_FUNCDIS4 0xce00ab07 /* SPI1 D21:F4 */ +#define SIO_IOBP_FUNCDIS5 0xce00ab47 /* UART0 D21:F5 */ +#define SIO_IOBP_FUNCDIS6 0xce00ab87 /* UART1 D21:F6 */ +#define SIO_IOBP_FUNCDIS7 0xce00ae07 /* SDIO D23:F0 */ +#define SIO_IOBP_FUNCDIS_DIS (1 << 8) + +/* Serial IO Devices */ +#define SIO_ID_SDMA 0 /* D21:F0 */ +#define SIO_ID_I2C0 1 /* D21:F1 */ +#define SIO_ID_I2C1 2 /* D21:F2 */ +#define SIO_ID_SPI0 3 /* D21:F3 */ +#define SIO_ID_SPI1 4 /* D21:F4 */ +#define SIO_ID_UART0 5 /* D21:F5 */ +#define SIO_ID_UART1 6 /* D21:F6 */ +#define SIO_ID_SDIO 7 /* D23:F0 */ + +#define SIO_REG_PPR_CLOCK 0x800 +#define SIO_REG_PPR_CLOCK_EN (1 << 0) +#define SIO_REG_PPR_CLOCK_UPDATE (1 << 31) +#define SIO_REG_PPR_CLOCK_M_DIV 0x25a +#define SIO_REG_PPR_CLOCK_N_DIV 0x7fff +#define SIO_REG_PPR_RST 0x804 +#define SIO_REG_PPR_RST_ASSERT 0x3 +#define SIO_REG_PPR_GEN 0x808 +#define SIO_REG_PPR_GEN_LTR_MODE_MASK (1 << 2) +#define SIO_REG_PPR_GEN_VOLTAGE_MASK (1 << 3) +#define SIO_REG_PPR_GEN_VOLTAGE(x) ((x & 1) << 3) +#define SIO_REG_AUTO_LTR 0x814 + +#define SIO_REG_SDIO_PPR_GEN 0x1008 +#define SIO_REG_SDIO_PPR_SW_LTR 0x1010 +#define SIO_REG_SDIO_PPR_CMD12 0x3c +#define SIO_REG_SDIO_PPR_CMD12_B30 (1 << 30) + +#define SIO_PIN_INTA 1 /* IRQ5 in ACPI mode */ +#define SIO_PIN_INTB 2 /* IRQ6 in ACPI mode */ +#define SIO_PIN_INTC 3 /* IRQ7 in ACPI mode */ +#define SIO_PIN_INTD 4 /* IRQ13 in ACPI mode */ + +#endif diff --git a/src/soc/intel/skylake/include/soc/smbus.h b/src/soc/intel/skylake/include/soc/smbus.h new file mode 100644 index 0000000..fb13c2d --- /dev/null +++ b/src/soc/intel/skylake/include/soc/smbus.h @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Yinghai Lu <yinghailu(a)gmail.com> + * Copyright (C) 2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_SMBUS_H_ +#define _BROADWELL_SMBUS_H_ + +/* PCI Configuration Space (D31:F3): SMBus */ +#define SMB_BASE 0x20 +#define HOSTC 0x40 +#define HST_EN (1 << 0) +#define SMB_RCV_SLVA 0x09 + +/* SMBus I/O bits. */ +#define SMBHSTSTAT 0x0 +#define SMBHSTCTL 0x2 +#define SMBHSTCMD 0x3 +#define SMBXMITADD 0x4 +#define SMBHSTDAT0 0x5 +#define SMBHSTDAT1 0x6 +#define SMBBLKDAT 0x7 +#define SMBTRNSADD 0x9 +#define SMBSLVDATA 0xa +#define SMLINK_PIN_CTL 0xe +#define SMBUS_PIN_CTL 0xf + +#define SMBUS_TIMEOUT (10 * 1000 * 100) +#define SMBUS_SLAVE_ADDR 0x24 + +int do_smbus_read_byte(unsigned smbus_base, unsigned device, + unsigned address); +int do_smbus_write_byte(unsigned smbus_base, unsigned device, + unsigned address, unsigned data); + +#endif diff --git a/src/soc/intel/skylake/include/soc/smm.h b/src/soc/intel/skylake/include/soc/smm.h new file mode 100644 index 0000000..f7f515c --- /dev/null +++ b/src/soc/intel/skylake/include/soc/smm.h @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_SMM_H_ +#define _BROADWELL_SMM_H_ + +#include <stdint.h> +#include <cpu/x86/msr.h> + +struct ied_header { + char signature[10]; + u32 size; + u8 reserved[34]; +} __attribute__ ((packed)); + +struct smm_relocation_params { + u32 smram_base; + u32 smram_size; + u32 ied_base; + u32 ied_size; + msr_t smrr_base; + msr_t smrr_mask; + msr_t emrr_base; + msr_t emrr_mask; + msr_t uncore_emrr_base; + msr_t uncore_emrr_mask; + /* The smm_save_state_in_msrs field indicates if SMM save state + * locations live in MSRs. This indicates to the CPUs how to adjust + * the SMMBASE and IEDBASE */ + int smm_save_state_in_msrs; +}; + +/* There is a bug in the order of Kconfig includes in that arch/x86/Kconfig + * is included after chipset code. This causes the chipset's Kconfig to be + * clobbered by the arch/x86/Kconfig if they have the same name. */ +static inline int smm_region_size(void) +{ + /* Make it 8MiB by default. */ + if (CONFIG_SMM_TSEG_SIZE == 0) + return (8 << 20); + return CONFIG_SMM_TSEG_SIZE; +} + +int smm_initialize(void); +void smm_relocate(void); + +/* These helpers are for performing SMM relocation. */ +void southbridge_trigger_smi(void); +void southbridge_clear_smi_status(void); + +/* The initialization of the southbridge is split into 2 components. One is + * for clearing the state in the SMM registers. The other is for enabling + * SMIs. They are split so that other work between the 2 actions. */ +void southbridge_smm_clear_state(void); +void southbridge_smm_enable_smi(void); + +#endif diff --git a/src/soc/intel/skylake/include/soc/spi.h b/src/soc/intel/skylake/include/soc/spi.h new file mode 100644 index 0000000..1449e29 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/spi.h @@ -0,0 +1,110 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_SPI_H_ +#define _BROADWELL_SPI_H_ + +/* + * SPI Opcode Menu setup for SPIBAR lockdown + * should support most common flash chips. + */ + +#define SPIBAR_OFFSET 0x3800 +#define SPIBAR8(x) RCBA8(x + SPIBAR_OFFSET) +#define SPIBAR16(x) RCBA16(x + SPIBAR_OFFSET) +#define SPIBAR32(x) RCBA32(x + SPIBAR_OFFSET) + +/* Registers within the SPIBAR */ +#define SPIBAR_SSFC 0x91 +#define SPIBAR_FDOC 0xb0 +#define SPIBAR_FDOD 0xb4 + +#define SPI_PRR_MAX 5 +#define SPI_PRR(x) (0x74 + ((x) * 4)) +#define SPI_PRR_SHIFT 12 +#define SPI_PRR_MASK 0x1fff +#define SPI_PRR_BASE_SHIFT 0 +#define SPI_PRR_LIMIT_SHIFT 16 +#define SPI_PRR_WPE (1 << 31) + +#define SPIBAR_PREOP 0x94 +#define SPIBAR_OPTYPE 0x96 +#define SPIBAR_OPMENU_LOWER 0x98 +#define SPIBAR_OPMENU_UPPER 0x9c + +#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */ +#define SPI_OPTYPE_0 0x01 /* Write, no address */ + +#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */ +#define SPI_OPTYPE_1 0x03 /* Write, address required */ + +#define SPI_OPMENU_2 0x03 /* READ: Read Data */ +#define SPI_OPTYPE_2 0x02 /* Read, address required */ + +#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */ +#define SPI_OPTYPE_3 0x00 /* Read, no address */ + +#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */ +#define SPI_OPTYPE_4 0x03 /* Write, address required */ + +#define SPI_OPMENU_5 0x9f /* RDID: Read ID */ +#define SPI_OPTYPE_5 0x00 /* Read, no address */ + +#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */ +#define SPI_OPTYPE_6 0x03 /* Write, address required */ + +#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */ +#define SPI_OPTYPE_7 0x02 /* Read, address required */ + +#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \ + (SPI_OPMENU_5 << 8) | SPI_OPMENU_4) +#define SPI_OPMENU_LOWER ((SPI_OPMENU_3 << 24) | (SPI_OPMENU_2 << 16) | \ + (SPI_OPMENU_1 << 8) | SPI_OPMENU_0) + +#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \ + (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \ + (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \ + (SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0)) + +#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */ + +#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */ +#define SPIBAR_HSFS_FLOCKDN (1 << 15)/* Flash Configuration Lock-Down */ +#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */ +#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */ +#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ +#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ +#define SPIBAR_HSFC 0x06 /* SPI hardware sequence control */ +#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8) +#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ +#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ +#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ +#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ +#define SPIBAR_FADDR 0x08 /* SPI flash address */ +#define SPIBAR_FDATA(n) (0x10 + (4 * n)) /* SPI flash data */ +#define SPIBAR_SSFS 0x90 +#define SPIBAR_SSFS_ERROR (1 << 3) +#define SPIBAR_SSFS_DONE (1 << 2) +#define SPIBAR_SSFC 0x91 +#define SPIBAR_SSFC_DATA (1 << 14) +#define SPIBAR_SSFC_GO (1 << 1) + +int spi_flash_protect(u32 start, u32 size); + +#endif diff --git a/src/soc/intel/skylake/include/soc/systemagent.h b/src/soc/intel/skylake/include/soc/systemagent.h new file mode 100644 index 0000000..325a4a5 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/systemagent.h @@ -0,0 +1,135 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_SYSTEMAGENT_H_ +#define _BROADWELL_SYSTEMAGENT_H_ + +#include <soc/iomap.h> + +#define SA_IGD_OPROM_VENDEV 0x80860406 + +#define IGD_HASWELL_ULT_GT1 0x0a06 +#define IGD_HASWELL_ULT_GT2 0x0a16 +#define IGD_HASWELL_ULT_GT3 0x0a26 +#define IGD_BROADWELL_U_GT1 0x1606 +#define IGD_BROADWELL_U_GT2 0x1616 +#define IGD_BROADWELL_U_GT3_15W 0x1626 +#define IGD_BROADWELL_U_GT3_28W 0x162b +#define IGD_BROADWELL_Y_GT2 0x161e +#define IGD_BROADWELL_H_GT2 0x1612 +#define IGD_BROADWELL_H_GT3 0x1622 + +#define MCH_BROADWELL_ID_U_Y 0x1604 +#define MCH_BROADWELL_REV_D0 0x06 +#define MCH_BROADWELL_REV_E0 0x08 +#define MCH_BROADWELL_REV_F0 0x09 + +/* Device 0:0.0 PCI configuration space */ + +#define EPBAR 0x40 +#define MCHBAR 0x48 +#define PCIEXBAR 0x60 +#define DMIBAR 0x68 +#define GGC 0x50 /* GMCH Graphics Control */ +#define DEVEN 0x54 /* Device Enable */ +#define DEVEN_D7EN (1 << 14) +#define DEVEN_D4EN (1 << 7) +#define DEVEN_D3EN (1 << 5) +#define DEVEN_D2EN (1 << 4) +#define DEVEN_D1F0EN (1 << 3) +#define DEVEN_D1F1EN (1 << 2) +#define DEVEN_D1F2EN (1 << 1) +#define DEVEN_D0EN (1 << 0) +#define DPR 0x5c +#define DPR_EPM (1 << 2) +#define DPR_PRS (1 << 1) +#define DPR_SIZE_MASK 0xff0 + +#define PAM0 0x80 +#define PAM1 0x81 +#define PAM2 0x82 +#define PAM3 0x83 +#define PAM4 0x84 +#define PAM5 0x85 +#define PAM6 0x86 + +#define SMRAM 0x88 /* System Management RAM Control */ +#define D_OPEN (1 << 6) +#define D_CLS (1 << 5) +#define D_LCK (1 << 4) +#define G_SMRAME (1 << 3) +#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) + +#define MESEG_BASE 0x70 /* Management Engine Base. */ +#define MESEG_LIMIT 0x78 /* Management Engine Limit. */ +#define REMAPBASE 0x90 /* Remap base. */ +#define REMAPLIMIT 0x98 /* Remap limit. */ +#define TOM 0xa0 /* Top of DRAM in memory controller space. */ +#define TOUUD 0xa8 /* Top of Upper Usable DRAM */ +#define BDSM 0xb0 /* Base Data Stolen Memory */ +#define BGSM 0xb4 /* Base GTT Stolen Memory */ +#define TSEG 0xb8 /* TSEG base */ +#define TOLUD 0xbc /* Top of Low Used Memory */ +#define SKPAD 0xdc /* Scratchpad Data */ + +/* MCHBAR */ + +#define MCHBAR8(x) *((volatile u8 *)(MCH_BASE_ADDRESS + x)) +#define MCHBAR16(x) *((volatile u16 *)(MCH_BASE_ADDRESS + x)) +#define MCHBAR32(x) *((volatile u32 *)(MCH_BASE_ADDRESS + x)) + +#define MCHBAR_PEI_VERSION 0x5034 +#define BIOS_RESET_CPL 0x5da8 +#define EDRAMBAR 0x5408 +#define MCH_PAIR 0x5418 +#define GDXCBAR 0x5420 + +#define MCH_PKG_POWER_LIMIT_LO 0x59a0 +#define MCH_PKG_POWER_LIMIT_HI 0x59a4 +#define MCH_DDR_POWER_LIMIT_LO 0x58e0 +#define MCH_DDR_POWER_LIMIT_HI 0x58e4 + +/* PCODE MMIO communications live in the MCHBAR. */ +#define BIOS_MAILBOX_INTERFACE 0x5da4 +#define MAILBOX_RUN_BUSY (1 << 31) +#define MAILBOX_BIOS_CMD_READ_PCS 1 +#define MAILBOX_BIOS_CMD_WRITE_PCS 2 +#define MAILBOX_BIOS_CMD_READ_CALIBRATION 0x509 +#define MAILBOX_BIOS_CMD_FSM_MEASURE_INTVL 0x909 +#define MAILBOX_BIOS_CMD_READ_PCH_POWER 0xa +#define MAILBOX_BIOS_CMD_READ_PCH_POWER_EXT 0xb +#define MAILBOX_BIOS_CMD_READ_C9C10_VOLTAGE 0x26 +#define MAILBOX_BIOS_CMD_WRITE_C9C10_VOLTAGE 0x27 +/* Errors are returned back in bits 7:0. */ +#define MAILBOX_BIOS_ERROR_NONE 0 +#define MAILBOX_BIOS_ERROR_INVALID_COMMAND 1 +#define MAILBOX_BIOS_ERROR_TIMEOUT 2 +#define MAILBOX_BIOS_ERROR_ILLEGAL_DATA 3 +#define MAILBOX_BIOS_ERROR_RESERVED 4 +#define MAILBOX_BIOS_ERROR_ILLEGAL_VR_ID 5 +#define MAILBOX_BIOS_ERROR_VR_INTERFACE_LOCKED 6 +#define MAILBOX_BIOS_ERROR_VR_ERROR 7 +/* Data is passed through bits 31:0 of the data register. */ +#define BIOS_MAILBOX_DATA 0x5da0 + +/* System Agent identification */ +u8 systemagent_revision(void); + +#endif diff --git a/src/soc/intel/skylake/include/soc/xhci.h b/src/soc/intel/skylake/include/soc/xhci.h new file mode 100644 index 0000000..2b899a3 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/xhci.h @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BROADWELL_XHCI_H_ +#define _BROADWELL_XHCI_H_ + +/* XHCI PCI Registers */ +#define XHCI_PWR_CTL_STS 0x74 +#define XHCI_PWR_CTL_SET_MASK 0x3 +#define XHCI_PWR_CTL_SET_D0 0x0 +#define XHCI_PWR_CTL_SET_D3 0x3 +#define XHCI_PWR_CTL_ENABLE_PME (1 << 8) +#define XHCI_PWR_CTL_STATUS_PME (1 << 15) +#define XHCI_USB2PR 0xd0 +#define XHCI_USB2PRM 0xd4 +#define XHCI_USB2PR_HCSEL 0x7fff +#define XHCI_USB3PR 0xd8 +#define XHCI_USB3PR_SSEN 0x3f +#define XHCI_USB3PRM 0xdc +#define XHCI_USB3FUS 0xe0 +#define XHCI_USB3FUS_SS_MASK 3 +#define XHCI_USB3FUS_SS_SHIFT 3 +#define XHCI_USB3PDO 0xe8 + +/* XHCI Memory Registers */ +#define XHCI_USB3_PORTSC(port) (0x530 + (port * 0x10)) +#define XHCI_USB3_PORTSC_CHST (0x7f << 17) +#define XHCI_USB3_PORTSC_WCE (1 << 25) /* Wake on Connect */ +#define XHCI_USB3_PORTSC_WDE (1 << 26) /* Wake on Disconnect */ +#define XHCI_USB3_PORTSC_WOE (1 << 27) /* Wake on Overcurrent */ +#define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */ +#define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */ +#define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */ +#define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */ +#define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */ +#define XHCI_PLSR_DISABLED (4 << 5) /* Port is disabled */ +#define XHCI_PLSR_RXDETECT (5 << 5) /* Port is disconnected */ +#define XHCI_PLSR_POLLING (7 << 5) /* Port is polling */ +#define XHCI_PLSW_ENABLE (5 << 5) /* Transition from disabled */ + +#ifdef __SMM__ +void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ); +#endif + +#endif diff --git a/src/soc/intel/skylake/iobp.c b/src/soc/intel/skylake/iobp.c new file mode 100644 index 0000000..870f6af --- /dev/null +++ b/src/soc/intel/skylake/iobp.c @@ -0,0 +1,152 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <delay.h> +#include <arch/io.h> +#include <soc/iobp.h> +#include <soc/rcba.h> + +#define IOBP_RETRY 1000 + +static inline int iobp_poll(void) +{ + unsigned try; + + for (try = IOBP_RETRY; try > 0; try--) { + u16 status = RCBA16(IOBPS); + if ((status & IOBPS_READY) == 0) + return 1; + udelay(10); + } + + printk(BIOS_ERR, "IOBP: timeout waiting for transaction to complete\n"); + return 0; +} + +u32 pch_iobp_read(u32 address) +{ + u16 status; + + if (!iobp_poll()) + return 0; + + /* Set the address */ + RCBA32(IOBPIRI) = address; + + /* READ OPCODE */ + status = RCBA16(IOBPS); + status &= ~IOBPS_MASK; + status |= IOBPS_READ; + RCBA16(IOBPS) = status; + + /* Undocumented magic */ + RCBA16(IOBPU) = IOBPU_MAGIC; + + /* Set ready bit */ + status = RCBA16(IOBPS); + status |= IOBPS_READY; + RCBA16(IOBPS) = status; + + if (!iobp_poll()) + return 0; + + /* Check for successful transaction */ + status = RCBA16(IOBPS); + if (status & IOBPS_TX_MASK) { + printk(BIOS_ERR, "IOBP: read 0x%08x failed\n", address); + return 0; + } + + /* Read IOBP data */ + return RCBA32(IOBPD); +} + +void pch_iobp_write(u32 address, u32 data) +{ + u16 status; + + if (!iobp_poll()) + return; + + /* Set the address */ + RCBA32(IOBPIRI) = address; + + /* WRITE OPCODE */ + status = RCBA16(IOBPS); + status &= ~IOBPS_MASK; + status |= IOBPS_WRITE; + RCBA16(IOBPS) = status; + + RCBA32(IOBPD) = data; + + /* Undocumented magic */ + RCBA16(IOBPU) = IOBPU_MAGIC; + + /* Set ready bit */ + status = RCBA16(IOBPS); + status |= IOBPS_READY; + RCBA16(IOBPS) = status; + + if (!iobp_poll()) + return; + + /* Check for successful transaction */ + status = RCBA16(IOBPS); + if (status & IOBPS_TX_MASK) + printk(BIOS_ERR, "IOBP: write 0x%08x failed\n", address); +} + +void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue) +{ + u32 data = pch_iobp_read(address); + + /* Update the data */ + data &= andvalue; + data |= orvalue; + + pch_iobp_write(address, data); +} + +void pch_iobp_exec(u32 addr, u16 op_code, u8 route_id, u32 *data, u8 *resp) +{ + if (!data || !resp) + return; + + *resp = -1; + if (!iobp_poll()) + return; + + /* RCBA2330[31:0] = Address */ + RCBA32(IOBPIRI) = addr; + /* RCBA2338[15:8] = opcode */ + RCBA16(IOBPS) = (RCBA16(IOBPS) & 0x00ff) | op_code; + /* RCBA233A[15:8] = 0xf0 RCBA233A[7:0] = Route ID */ + RCBA16(IOBPU) = IOBPU_MAGIC | route_id; + + RCBA32(IOBPD) = *data; + /* Set RCBA2338[0] to trigger IOBP transaction*/ + RCBA16(IOBPS) = RCBA16(IOBPS) | 0x1; + + if (!iobp_poll()) + return; + + *resp = (RCBA16(IOBPS) & IOBPS_TX_MASK) >> 1; + *data = RCBA32(IOBPD); +} diff --git a/src/soc/intel/skylake/lpc.c b/src/soc/intel/skylake/lpc.c new file mode 100644 index 0000000..6cc1116 --- /dev/null +++ b/src/soc/intel/skylake/lpc.c @@ -0,0 +1,670 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <pc80/mc146818rtc.h> +#include <pc80/isa-dma.h> +#include <pc80/i8259.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <cpu/cpu.h> +#include <cpu/x86/smm.h> +#include <cbmem.h> +#include <reg_script.h> +#include <string.h> +#include <soc/gpio.h> +#include <soc/iobp.h> +#include <soc/iomap.h> +#include <soc/lpc.h> +#include <soc/nvs.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> +#include <soc/ramstage.h> +#include <soc/rcba.h> +#include <soc/intel/broadwell/chip.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <cpu/cpu.h> + +#if IS_ENABLED(CONFIG_CHROMEOS) +#include <vendorcode/google/chromeos/chromeos.h> +#endif + +static void pch_enable_ioapic(struct device *dev) +{ + u32 reg32; + + set_ioapic_id(VIO_APIC_VADDR, 0x02); + + /* affirm full set of redirection table entries ("write once") */ + reg32 = io_apic_read(VIO_APIC_VADDR, 0x01); + + /* PCH-LP has 39 redirection entries */ + reg32 &= ~0x00ff0000; + reg32 |= 0x00270000; + + io_apic_write(VIO_APIC_VADDR, 0x01, reg32); + + /* + * Select Boot Configuration register (0x03) and + * use Processor System Bus (0x01) to deliver interrupts. + */ + io_apic_write(VIO_APIC_VADDR, 0x03, 0x01); +} + +/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control + * 0x00 - 0000 = Reserved + * 0x01 - 0001 = Reserved + * 0x02 - 0010 = Reserved + * 0x03 - 0011 = IRQ3 + * 0x04 - 0100 = IRQ4 + * 0x05 - 0101 = IRQ5 + * 0x06 - 0110 = IRQ6 + * 0x07 - 0111 = IRQ7 + * 0x08 - 1000 = Reserved + * 0x09 - 1001 = IRQ9 + * 0x0A - 1010 = IRQ10 + * 0x0B - 1011 = IRQ11 + * 0x0C - 1100 = IRQ12 + * 0x0D - 1101 = Reserved + * 0x0E - 1110 = IRQ14 + * 0x0F - 1111 = IRQ15 + * PIRQ[n]_ROUT[7] - PIRQ Routing Control + * 0x80 - The PIRQ is not routed. + */ + +static void pch_pirq_init(device_t dev) +{ + device_t irq_dev; + config_t *config = dev->chip_info; + + pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); + pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); + pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); + pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); + + pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); + pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); + pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); + pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); + + for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { + u8 int_pin=0, int_line=0; + + if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) + continue; + + int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); + + switch (int_pin) { + case 1: /* INTA# */ int_line = config->pirqa_routing; break; + case 2: /* INTB# */ int_line = config->pirqb_routing; break; + case 3: /* INTC# */ int_line = config->pirqc_routing; break; + case 4: /* INTD# */ int_line = config->pirqd_routing; break; + } + + if (!int_line) + continue; + + pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); + } +} + +static void pch_power_options(device_t dev) +{ + u16 reg16; + const char *state; + /* Get the chip configuration */ + config_t *config = dev->chip_info; + int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; + + /* Which state do we want to goto after g3 (power restored)? + * 0 == S0 Full On + * 1 == S5 Soft Off + * + * If the option is not existent (Laptops), use Kconfig setting. + */ + get_option(&pwr_on, "power_on_after_fail"); + + reg16 = pci_read_config16(dev, GEN_PMCON_3); + reg16 &= 0xfffe; + switch (pwr_on) { + case MAINBOARD_POWER_OFF: + reg16 |= 1; + state = "off"; + break; + case MAINBOARD_POWER_ON: + reg16 &= ~1; + state = "on"; + break; + case MAINBOARD_POWER_KEEP: + reg16 &= ~1; + state = "state keep"; + break; + default: + state = "undefined"; + } + pci_write_config16(dev, GEN_PMCON_3, reg16); + printk(BIOS_INFO, "Set power %s after power failure.\n", state); + + /* GPE setup based on device tree configuration */ + enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2, + config->gpe0_en_3, config->gpe0_en_4); + + /* SMI setup based on device tree configuration */ + enable_alt_smi(config->alt_gp_smi_en); +} + +#if IS_ENABLED(CONFIG_CHROMEOS) && IS_ENABLED(CONFIG_CHROMEOS_VBNV_CMOS) +/* + * Preserve Vboot NV data when clearing CMOS as it will + * have been re-initialized already by Vboot firmware init. + */ +static void pch_cmos_init_preserve(int reset) +{ + uint8_t vbnv[CONFIG_VBNV_SIZE]; + + if (reset) + read_vbnv(vbnv); + + cmos_init(reset); + + if (reset) + save_vbnv(vbnv); +} +#endif + +static void pch_rtc_init(struct device *dev) +{ + u8 reg8; + int rtc_failed; + + reg8 = pci_read_config8(dev, GEN_PMCON_3); + rtc_failed = reg8 & RTC_BATTERY_DEAD; + if (rtc_failed) { + reg8 &= ~RTC_BATTERY_DEAD; + pci_write_config8(dev, GEN_PMCON_3, reg8); + printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); + } + +#if IS_ENABLED(CONFIG_CHROMEOS) && IS_ENABLED(CONFIG_CHROMEOS_VBNV_CMOS) + pch_cmos_init_preserve(rtc_failed); +#else + cmos_init(rtc_failed); +#endif +} + +static const struct reg_script pch_misc_init_script[] = { + /* Setup SLP signal assertion, SLP_S4=4s, SLP_S3=50ms */ + REG_PCI_RMW16(GEN_PMCON_3, ~((3 << 4)|(1 << 10)), + (1 << 3)|(1 << 11)|(1 << 12)), + /* Prepare sleep mode */ + REG_IO_RMW32(ACPI_BASE_ADDRESS + PM1_CNT, ~SLP_TYP, SCI_EN), + /* Setup NMI on errors, disable SERR */ + REG_IO_RMW8(0x61, ~0xf0, (1 << 2)), + /* Disable NMI sources */ + REG_IO_OR8(0x70, (1 << 7)), + /* Indicate DRAM init done for MRC */ + REG_PCI_OR8(GEN_PMCON_2, (1 << 7)), + /* Enable BIOS updates outside of SMM */ + REG_PCI_RMW8(0xdc, ~(1 << 5), 0), + /* Clear status bits to prevent unexpected wake */ + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x3310, 0x0000002f), + REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x3f02, ~0x0000000f, 0), + /* Enable PCIe Releaxed Order */ + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2314, (1 << 31) | (1 << 7)), + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x1114, (1 << 15) | (1 << 14)), + /* Setup SERIRQ, enable continuous mode */ + REG_PCI_OR8(SERIRQ_CNTL, (1 << 7) | (1 << 6)), +#if !CONFIG_SERIRQ_CONTINUOUS_MODE + REG_PCI_RMW8(SERIRQ_CNTL, ~(1 << 6), 0), +#endif + REG_SCRIPT_END +}; + +/* Magic register settings for power management */ +static const struct reg_script pch_pm_init_script[] = { + REG_PCI_WRITE8(0xa9, 0x46), + REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x232c, ~1, 0), + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x1100, 0x0000c13f), + REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x2320, ~0x60, 0x10), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3314, 0x00012fff), + REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x3318, ~0x000f0330, 0x0dcf0400), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3324, 0x04000000), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3368, 0x00041400), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3388, 0x3f8ddbff), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33ac, 0x00007001), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33b0, 0x00181900), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33c0, 0x00060A00), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33d0, 0x06200840), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a28, 0x01010101), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a2c, 0x040c0404), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a9c, 0x9000000a), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b1c, 0x03808033), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b34, 0x80000009), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3348, 0x022ddfff), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x334c, 0x00000001), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3358, 0x0001c000), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3380, 0x3f8ddbff), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3384, 0x0001c7e1), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x338c, 0x0001c7e1), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3398, 0x0001c000), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33a8, 0x00181900), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33dc, 0x00080000), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33e0, 0x00000001), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a20, 0x0000040c), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a24, 0x01010101), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a30, 0x01010101), + REG_PCI_RMW32(0xac, ~0x00200000, 0), + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x0410, 0x00000003), + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2618, 0x08000000), + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2300, 0x00000002), + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x2600, 0x00000008), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x33b4, 0x00007001), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3350, 0x022ddfff), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3354, 0x00000001), + /* Power Optimizer */ + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33d4, 0x08000000), + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33c8, 0x08000080), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b10, 0x0000883c), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b14, 0x1e0a4616), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b24, 0x40000005), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x2b20, 0x0005db01), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a80, 0x05145005), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x3a84, 0x00001005), + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33d4, 0x2fff2fb1), + REG_MMIO_OR32(RCBA_BASE_ADDRESS + 0x33c8, 0x00008000), + REG_SCRIPT_END +}; + +static void pch_enable_mphy(void) +{ + u32 gpio71_native = gpio_is_native(71); + u32 data_and = 0xffffffff; + u32 data_or = (1 << 14) | (1 << 13) | (1 << 12); + + if (gpio71_native) { + data_or |= (1 << 0); + if (pch_is_wpt()) { + data_and &= ~((1 << 7) | (1 << 6) | (1 << 3)); + data_or |= (1 << 5) | (1 << 4); + + if (pch_is_wpt_ulx()) { + /* Check if SATA and USB3 MPHY are enabled */ + u32 strap19 = pch_read_soft_strap(19); + strap19 &= ((1 << 31) | (1 << 30)); + strap19 >>= 30; + if (strap19 == 3) { + data_or |= (1 << 3); + printk(BIOS_DEBUG, "Enable ULX MPHY PG " + "control in single domain\n"); + } else if (strap19 == 0) { + printk(BIOS_DEBUG, "Enable ULX MPHY PG " + "control in split domains\n"); + } else { + printk(BIOS_DEBUG, "Invalid PCH Soft " + "Strap 19 configuration\n"); + } + } else { + data_or |= (1 << 3); + } + } + } + + pch_iobp_update(0xCF000000, data_and, data_or); +} + +static void pch_init_deep_sx(struct device *dev) +{ + config_t *config = dev->chip_info; + + if (config->deep_sx_enable_ac) { + RCBA32_OR(DEEP_S3_POL, DEEP_S3_EN_AC); + RCBA32_OR(DEEP_S5_POL, DEEP_S5_EN_AC); + } + + if (config->deep_sx_enable_dc) { + RCBA32_OR(DEEP_S3_POL, DEEP_S3_EN_DC); + RCBA32_OR(DEEP_S5_POL, DEEP_S5_EN_DC); + } + + if (config->deep_sx_enable_ac || config->deep_sx_enable_dc) + RCBA32_OR(DEEP_SX_CONFIG, + DEEP_SX_WAKE_PIN_EN | DEEP_SX_GP27_PIN_EN); +} + +/* Power Management init */ +static void pch_pm_init(struct device *dev) +{ + printk(BIOS_DEBUG, "PCH PM init\n"); + + pch_init_deep_sx(dev); + + pch_enable_mphy(); + + reg_script_run_on_dev(dev, pch_pm_init_script); + + if (pch_is_wpt()) { + RCBA32_OR(0x33e0, (1 << 4) | (1 << 1)); + RCBA32_OR(0x2b1c, (1 << 22) | (1 << 14) | (1 << 13)); + RCBA32(0x33e4) = 0x16bf0002; + RCBA32_OR(0x33e4, 0x1); + } + + pch_iobp_update(0xCA000000, ~0UL, 0x00000009); + + /* Set RCBA 0x2b1c[29]=1 if DSP disabled */ + if (RCBA32(FD) & PCH_DISABLE_ADSPD) + RCBA32_OR(0x2b1c, (1 << 29)); + +} + +static void pch_cg_init(device_t dev) +{ + u32 reg32; + u16 reg16; + + /* DMI */ + RCBA32_OR(0x2234, 0xf); + + reg16 = pci_read_config16(dev, GEN_PMCON_1); + reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */ + if (pch_is_wpt()) + reg16 &= ~(1 << 11); + else + reg16 |= (1 << 11); + reg16 |= (1 << 5) | (1 << 6) | (1 << 7) | (1 << 12); + reg16 |= (1 << 2); // PCI CLKRUN# Enable + pci_write_config16(dev, GEN_PMCON_1, reg16); + + /* + * RCBA + 0x2614[27:25,14:13,10,8] = 101,11,1,1 + * RCBA + 0x2614[23:16] = 0x20 + * RCBA + 0x2614[30:28] = 0x0 + * RCBA + 0x2614[26] = 1 (IF 0:2.0@0x08 >= 0x0b) + */ + RCBA32_AND_OR(0x2614, ~0x64ff0000, 0x0a206500); + + /* Check for 0:2.0@0x08 >= 0x0b */ + if (pch_is_wpt() || pci_read_config8(SA_DEV_IGD, 0x8) >= 0x0b) + RCBA32_OR(0x2614, (1 << 26)); + + RCBA32_OR(0x900, 0x0000031f); + + reg32 = RCBA32(CG); + if (RCBA32(0x3454) & (1 << 4)) + reg32 &= ~(1 << 29); // LPC Dynamic + else + reg32 |= (1 << 29); // LPC Dynamic + reg32 |= (1 << 31); // LP LPC + reg32 |= (1 << 30); // LP BLA + if (RCBA32(0x3454) & (1 << 4)) + reg32 &= ~(1 << 29); + else + reg32 |= (1 << 29); + reg32 |= (1 << 28); // GPIO Dynamic + reg32 |= (1 << 27); // HPET Dynamic + reg32 |= (1 << 26); // Generic Platform Event Clock + if (RCBA32(BUC) & PCH_DISABLE_GBE) + reg32 |= (1 << 23); // GbE Static + if (RCBA32(FD) & PCH_DISABLE_HD_AUDIO) + reg32 |= (1 << 21); // HDA Static + reg32 |= (1 << 22); // HDA Dynamic + RCBA32(CG) = reg32; + + /* PCH-LP LPC */ + if (pch_is_wpt()) + RCBA32_AND_OR(0x3434, ~0x1f, 0x17); + else + RCBA32_OR(0x3434, 0x7); + + /* SPI */ + RCBA32_OR(0x38c0, 0x3c07); + + pch_iobp_update(0xCE00C000, ~1UL, 0x00000000); +} + +static void pch_set_acpi_mode(void) +{ +#if CONFIG_HAVE_SMI_HANDLER + if (!acpi_is_wakeup_s3()) { + printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); + outb(APM_CNT_ACPI_DISABLE, APM_CNT); + printk(BIOS_DEBUG, "done.\n"); + } +#endif /* CONFIG_HAVE_SMI_HANDLER */ +} + +static void lpc_init(struct device *dev) +{ + /* Legacy initialization */ + isa_dma_init(); + pch_rtc_init(dev); + reg_script_run_on_dev(dev, pch_misc_init_script); + + /* Interrupt configuration */ + pch_enable_ioapic(dev); + pch_pirq_init(dev); + setup_i8259(); + i8259_configure_irq_trigger(9, 1); + + /* Initialize power management */ + pch_power_options(dev); + pch_pm_init(dev); + pch_cg_init(dev); + + pch_set_acpi_mode(); +} + +static void pch_lpc_add_mmio_resources(device_t dev) +{ + u32 reg; + struct resource *res; + const u32 default_decode_base = IO_APIC_ADDR; + + /* + * Just report all resources from IO-APIC base to 4GiB. Don't mark + * them reserved as that may upset the OS if this range is marked + * as reserved in the e820. + */ + res = new_resource(dev, OIC); + res->base = default_decode_base; + res->size = 0 - default_decode_base; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + /* RCBA */ + if (RCBA_BASE_ADDRESS < default_decode_base) { + res = new_resource(dev, RCBA); + res->base = RCBA_BASE_ADDRESS; + res->size = 16 * 1024; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | + IORESOURCE_FIXED | IORESOURCE_RESERVE; + } + + /* Check LPC Memory Decode register. */ + reg = pci_read_config32(dev, LGMR); + if (reg & 1) { + reg &= ~0xffff; + if (reg < default_decode_base) { + res = new_resource(dev, LGMR); + res->base = reg; + res->size = 16 * 1024; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | + IORESOURCE_FIXED | IORESOURCE_RESERVE; + } + } +} + +/* Default IO range claimed by the LPC device. The upper bound is exclusive. */ +#define LPC_DEFAULT_IO_RANGE_LOWER 0 +#define LPC_DEFAULT_IO_RANGE_UPPER 0x1000 + +static inline int pch_io_range_in_default(u16 base, u16 size) +{ + /* Does it start above the range? */ + if (base >= LPC_DEFAULT_IO_RANGE_UPPER) + return 0; + + /* Is it entirely contained? */ + if (base >= LPC_DEFAULT_IO_RANGE_LOWER && + (base + size) < LPC_DEFAULT_IO_RANGE_UPPER) + return 1; + + /* This will return not in range for partial overlaps. */ + return 0; +} + +/* + * Note: this function assumes there is no overlap with the default LPC device's + * claimed range: LPC_DEFAULT_IO_RANGE_LOWER -> LPC_DEFAULT_IO_RANGE_UPPER. + */ +static void pch_lpc_add_io_resource(device_t dev, u16 base, u16 size, int index) +{ + struct resource *res; + + if (pch_io_range_in_default(base, size)) + return; + + res = new_resource(dev, index); + res->base = base; + res->size = size; + res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; +} + +static void pch_lpc_add_gen_io_resources(device_t dev, int reg_value, int index) +{ + /* + * Check if the register is enabled. If so and the base exceeds the + * device's default claim range add the resource. + */ + if (reg_value & 1) { + u16 base = reg_value & 0xfffc; + u16 size = (0x3 | ((reg_value >> 16) & 0xfc)) + 1; + pch_lpc_add_io_resource(dev, base, size, index); + } +} + +static void pch_lpc_add_io_resources(device_t dev) +{ + struct resource *res; + config_t *config = dev->chip_info; + + /* Add the default claimed IO range for the LPC device. */ + res = new_resource(dev, 0); + res->base = LPC_DEFAULT_IO_RANGE_LOWER; + res->size = LPC_DEFAULT_IO_RANGE_UPPER - LPC_DEFAULT_IO_RANGE_LOWER; + res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + /* GPIOBASE */ + pch_lpc_add_io_resource(dev, GPIO_BASE_ADDRESS, + GPIO_BASE_SIZE, GPIO_BASE); + + /* PMBASE */ + pch_lpc_add_io_resource(dev, ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, PMBASE); + + /* LPC Generic IO Decode range. */ + pch_lpc_add_gen_io_resources(dev, config->gen1_dec, LPC_GEN1_DEC); + pch_lpc_add_gen_io_resources(dev, config->gen2_dec, LPC_GEN2_DEC); + pch_lpc_add_gen_io_resources(dev, config->gen3_dec, LPC_GEN3_DEC); + pch_lpc_add_gen_io_resources(dev, config->gen4_dec, LPC_GEN4_DEC); +} + +static void pch_lpc_read_resources(device_t dev) +{ + global_nvs_t *gnvs; + + /* Get the normal PCI resources of this device. */ + pci_dev_read_resources(dev); + + /* Add non-standard MMIO resources. */ + pch_lpc_add_mmio_resources(dev); + + /* Add IO resources. */ + pch_lpc_add_io_resources(dev); + + /* Allocate ACPI NVS in CBMEM */ + gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof(global_nvs_t)); + if (!acpi_is_wakeup_s3() && gnvs) + memset(gnvs, 0, sizeof(global_nvs_t)); +} + +static void southcluster_inject_dsdt(void) +{ + global_nvs_t *gnvs; + + gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); + if (!gnvs) { + gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof (*gnvs)); + if (gnvs) + memset(gnvs, 0, sizeof(*gnvs)); + } + + if (gnvs) { + memset(gnvs, 0, sizeof(*gnvs)); + acpi_create_gnvs(gnvs); + acpi_save_gnvs((unsigned long)gnvs); + /* And tell SMI about it */ + smm_setup_structures(gnvs, NULL, NULL); + + /* Add it to DSDT. */ + acpigen_write_scope("\\"); + acpigen_write_name_dword("NVSA", (u32) gnvs); + acpigen_pop_len(); + } +} + +static struct device_operations device_ops = { + .read_resources = &pch_lpc_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .acpi_inject_dsdt_generator = southcluster_inject_dsdt, + .write_acpi_tables = acpi_write_hpet, + .init = &lpc_init, + .scan_bus = &scan_static_bus, + .ops_pci = &broadwell_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { + PCH_LPT_LP_SAMPLE, + PCH_LPT_LP_PREMIUM, + PCH_LPT_LP_MAINSTREAM, + PCH_LPT_LP_VALUE, + PCH_WPT_HSW_U_SAMPLE, + PCH_WPT_BDW_U_SAMPLE, + PCH_WPT_BDW_U_PREMIUM, + PCH_WPT_BDW_U_BASE, + PCH_WPT_BDW_Y_SAMPLE, + PCH_WPT_BDW_Y_PREMIUM, + PCH_WPT_BDW_Y_BASE, + PCH_WPT_BDW_H, + 0 +}; + +static const struct pci_driver pch_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/soc/intel/skylake/me.c b/src/soc/intel/skylake/me.c new file mode 100644 index 0000000..3cac120 --- /dev/null +++ b/src/soc/intel/skylake/me.c @@ -0,0 +1,1085 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * This is a ramstage driver for the Intel Management Engine found in the + * southbridge. It handles the required boot-time messages over the + * MMIO-based Management Engine Interface to tell the ME that the BIOS is + * finished with POST. Additional messages are defined for debug but are + * not used unless the console loglevel is high enough. + */ + +#include <arch/acpi.h> +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_def.h> +#include <string.h> +#include <delay.h> +#include <elog.h> +#include <soc/me.h> +#include <soc/lpc.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <soc/ramstage.h> +#include <soc/rcba.h> +#include <soc/intel/broadwell/chip.h> + +#if CONFIG_CHROMEOS +#include <vendorcode/google/chromeos/chromeos.h> +#include <vendorcode/google/chromeos/gnvs.h> +#endif + +/* Path that the BIOS should take based on ME state */ +static const char *me_bios_path_values[] = { + [ME_NORMAL_BIOS_PATH] = "Normal", + [ME_S3WAKE_BIOS_PATH] = "S3 Wake", + [ME_ERROR_BIOS_PATH] = "Error", + [ME_RECOVERY_BIOS_PATH] = "Recovery", + [ME_DISABLE_BIOS_PATH] = "Disable", + [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update", +}; + +/* MMIO base address for MEI interface */ +static u8 *mei_base_address; + +#if CONFIG_DEBUG_INTEL_ME +static void mei_dump(void *ptr, int dword, int offset, const char *type) +{ + struct mei_csr *csr; + + printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset); + + switch (offset) { + case MEI_H_CSR: + case MEI_ME_CSR_HA: + csr = ptr; + if (!csr) { + printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword); + break; + } + printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u " + "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth, + csr->buffer_read_ptr, csr->buffer_write_ptr, + csr->ready, csr->reset, csr->interrupt_generate, + csr->interrupt_status, csr->interrupt_enable); + break; + case MEI_ME_CB_RW: + case MEI_H_CB_WW: + printk(BIOS_SPEW, "CB: 0x%08x\n", dword); + break; + default: + printk(BIOS_SPEW, "0x%08x\n", offset); + break; + } +} +#else +# define mei_dump(ptr,dword,offset,type) do {} while (0) +#endif + +/* + * ME/MEI access helpers using memcpy to avoid aliasing. + */ + +static inline void mei_read_dword_ptr(void *ptr, int offset) +{ + u32 dword = read32(mei_base_address + offset); + memcpy(ptr, &dword, sizeof(dword)); + mei_dump(ptr, dword, offset, "READ"); +} + +static inline void mei_write_dword_ptr(void *ptr, int offset) +{ + u32 dword = 0; + memcpy(&dword, ptr, sizeof(dword)); + write32(mei_base_address + offset, dword); + mei_dump(ptr, dword, offset, "WRITE"); +} + +static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset) +{ + u32 dword = pci_read_config32(dev, offset); + memcpy(ptr, &dword, sizeof(dword)); + mei_dump(ptr, dword, offset, "PCI READ"); +} + +static inline void read_host_csr(struct mei_csr *csr) +{ + mei_read_dword_ptr(csr, MEI_H_CSR); +} + +static inline void write_host_csr(struct mei_csr *csr) +{ + mei_write_dword_ptr(csr, MEI_H_CSR); +} + +static inline void read_me_csr(struct mei_csr *csr) +{ + mei_read_dword_ptr(csr, MEI_ME_CSR_HA); +} + +static inline void write_cb(u32 dword) +{ + write32(mei_base_address + MEI_H_CB_WW, dword); + mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE"); +} + +static inline u32 read_cb(void) +{ + u32 dword = read32(mei_base_address + MEI_ME_CB_RW); + mei_dump(NULL, dword, MEI_ME_CB_RW, "READ"); + return dword; +} + +/* Wait for ME ready bit to be asserted */ +static int mei_wait_for_me_ready(void) +{ + struct mei_csr me; + unsigned try = ME_RETRY; + + while (try--) { + read_me_csr(&me); + if (me.ready) + return 0; + udelay(ME_DELAY); + } + + printk(BIOS_ERR, "ME: failed to become ready\n"); + return -1; +} + +static void mei_reset(void) +{ + struct mei_csr host; + + if (mei_wait_for_me_ready() < 0) + return; + + /* Reset host and ME circular buffers for next message */ + read_host_csr(&host); + host.reset = 1; + host.interrupt_generate = 1; + write_host_csr(&host); + + if (mei_wait_for_me_ready() < 0) + return; + + /* Re-init and indicate host is ready */ + read_host_csr(&host); + host.interrupt_generate = 1; + host.ready = 1; + host.reset = 0; + write_host_csr(&host); +} + +static int mei_send_packet(struct mei_header *mei, void *req_data) +{ + struct mei_csr host; + unsigned ndata, n; + u32 *data; + + /* Number of dwords to write */ + ndata = mei->length >> 2; + + /* Pad non-dword aligned request message length */ + if (mei->length & 3) + ndata++; + if (!ndata) { + printk(BIOS_DEBUG, "ME: request has no data\n"); + return -1; + } + ndata++; /* Add MEI header */ + + /* + * Make sure there is still room left in the circular buffer. + * Reset the buffer pointers if the requested message will not fit. + */ + read_host_csr(&host); + if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { + printk(BIOS_ERR, "ME: circular buffer full, resetting...\n"); + mei_reset(); + read_host_csr(&host); + } + + /* Ensure the requested length will fit in the circular buffer. */ + if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { + printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n", + ndata + 2, host.buffer_depth); + return -1; + } + + /* Write MEI header */ + mei_write_dword_ptr(mei, MEI_H_CB_WW); + ndata--; + + /* Write message data */ + data = req_data; + for (n = 0; n < ndata; ++n) + write_cb(*data++); + + /* Generate interrupt to the ME */ + read_host_csr(&host); + host.interrupt_generate = 1; + write_host_csr(&host); + + /* Make sure ME is ready after sending request data */ + return mei_wait_for_me_ready(); +} + +static int mei_send_data(u8 me_address, u8 host_address, + void *req_data, int req_bytes) +{ + struct mei_header header = { + .client_address = me_address, + .host_address = host_address, + }; + struct mei_csr host; + int current = 0; + u8 *req_ptr = req_data; + + while (!header.is_complete) { + int remain = req_bytes - current; + int buf_len; + + read_host_csr(&host); + buf_len = host.buffer_depth - host.buffer_write_ptr; + + if (buf_len > remain) { + /* Send all remaining data as final message */ + header.length = req_bytes - current; + header.is_complete = 1; + } else { + /* Send as much data as the buffer can hold */ + header.length = buf_len; + } + + mei_send_packet(&header, req_ptr); + + req_ptr += header.length; + current += header.length; + } + + return 0; +} + +static int mei_send_header(u8 me_address, u8 host_address, + void *header, int header_len, int complete) +{ + struct mei_header mei = { + .client_address = me_address, + .host_address = host_address, + .length = header_len, + .is_complete = complete, + }; + return mei_send_packet(&mei, header); +} + +static int mei_recv_msg(void *header, int header_bytes, + void *rsp_data, int rsp_bytes) +{ + struct mei_header mei_rsp; + struct mei_csr me, host; + unsigned ndata, n; + unsigned expected; + u32 *data; + + /* Total number of dwords to read from circular buffer */ + expected = (rsp_bytes + sizeof(mei_rsp) + header_bytes) >> 2; + if (rsp_bytes & 3) + expected++; + + if (mei_wait_for_me_ready() < 0) + return -1; + + /* + * The interrupt status bit does not appear to indicate that the + * message has actually been received. Instead we wait until the + * expected number of dwords are present in the circular buffer. + */ + for (n = ME_RETRY; n; --n) { + read_me_csr(&me); + if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected) + break; + udelay(ME_DELAY); + } + if (!n) { + printk(BIOS_ERR, "ME: timeout waiting for data: expected " + "%u, available %u\n", expected, + me.buffer_write_ptr - me.buffer_read_ptr); + return -1; + } + + /* Read and verify MEI response header from the ME */ + mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW); + if (!mei_rsp.is_complete) { + printk(BIOS_ERR, "ME: response is not complete\n"); + return -1; + } + + /* Handle non-dword responses and expect at least the header */ + ndata = mei_rsp.length >> 2; + if (mei_rsp.length & 3) + ndata++; + if (ndata != (expected - 1)) { + printk(BIOS_ERR, "ME: response is missing data %d != %d\n", + ndata, (expected - 1)); + return -1; + } + + /* Read response header from the ME */ + data = header; + for (n = 0; n < (header_bytes >> 2); ++n) + *data++ = read_cb(); + ndata -= header_bytes >> 2; + + /* Make sure caller passed a buffer with enough space */ + if (ndata != (rsp_bytes >> 2)) { + printk(BIOS_ERR, "ME: not enough room in response buffer: " + "%u != %u\n", ndata, rsp_bytes >> 2); + return -1; + } + + /* Read response data from the circular buffer */ + data = rsp_data; + for (n = 0; n < ndata; ++n) + *data++ = read_cb(); + + /* Tell the ME that we have consumed the response */ + read_host_csr(&host); + host.interrupt_status = 1; + host.interrupt_generate = 1; + write_host_csr(&host); + + return mei_wait_for_me_ready(); +} + +static inline int mei_sendrecv_mkhi(struct mkhi_header *mkhi, + void *req_data, int req_bytes, + void *rsp_data, int rsp_bytes) +{ + struct mkhi_header mkhi_rsp; + + /* Send header */ + if (mei_send_header(MEI_ADDRESS_MKHI, MEI_HOST_ADDRESS, + mkhi, sizeof(*mkhi), req_bytes ? 0 : 1) < 0) + return -1; + + /* Send data if available */ + if (req_bytes && mei_send_data(MEI_ADDRESS_MKHI, MEI_HOST_ADDRESS, + req_data, req_bytes) < 0) + return -1; + + /* Return now if no response expected */ + if (!rsp_bytes) + return 0; + + /* Read header and data */ + if (mei_recv_msg(&mkhi_rsp, sizeof(mkhi_rsp), + rsp_data, rsp_bytes) < 0) + return -1; + + if (!mkhi_rsp.is_response || + mkhi->group_id != mkhi_rsp.group_id || + mkhi->command != mkhi_rsp.command) { + printk(BIOS_ERR, "ME: invalid response, group %u ?= %u," + "command %u ?= %u, is_response %u\n", mkhi->group_id, + mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command, + mkhi_rsp.is_response); + return -1; + } + + return 0; +} + +static inline int mei_sendrecv_icc(struct icc_header *icc, + void *req_data, int req_bytes, + void *rsp_data, int rsp_bytes) +{ + struct icc_header icc_rsp; + + /* Send header */ + if (mei_send_header(MEI_ADDRESS_ICC, MEI_HOST_ADDRESS, + icc, sizeof(*icc), req_bytes ? 0 : 1) < 0) + return -1; + + /* Send data if available */ + if (req_bytes && mei_send_data(MEI_ADDRESS_ICC, MEI_HOST_ADDRESS, + req_data, req_bytes) < 0) + return -1; + + /* Read header and data, if needed */ + if (rsp_bytes && mei_recv_msg(&icc_rsp, sizeof(icc_rsp), + rsp_data, rsp_bytes) < 0) + return -1; + + return 0; +} + +/* + * mbp give up routine. This path is taken if hfs.mpb_rdy is 0 or the read + * state machine on the BIOS end doesn't match the ME's state machine. + */ +static void intel_me_mbp_give_up(device_t dev) +{ + struct mei_csr csr; + + pci_write_config32(dev, PCI_ME_H_GS2, PCI_ME_MBP_GIVE_UP); + + read_host_csr(&csr); + csr.reset = 1; + csr.interrupt_generate = 1; + write_host_csr(&csr); +} + +/* + * mbp clear routine. This will wait for the ME to indicate that + * the MBP has been read and cleared. + */ +static void intel_me_mbp_clear(device_t dev) +{ + int count; + struct me_hfs2 hfs2; + + /* Wait for the mbp_cleared indicator */ + for (count = ME_RETRY; count > 0; --count) { + pci_read_dword_ptr(dev, &hfs2, PCI_ME_HFS2); + if (hfs2.mbp_cleared) + break; + udelay(ME_DELAY); + } + + if (count == 0) { + printk(BIOS_WARNING, "ME: Timeout waiting for mbp_cleared\n"); + intel_me_mbp_give_up(dev); + } else { + printk(BIOS_INFO, "ME: MBP cleared\n"); + } +} + +static void me_print_fw_version(mbp_fw_version_name *vers_name) +{ + if (!vers_name) { + printk(BIOS_ERR, "ME: mbp missing version report\n"); + return; + } + + printk(BIOS_DEBUG, "ME: found version %d.%d.%d.%d\n", + vers_name->major_version, vers_name->minor_version, + vers_name->hotfix_version, vers_name->build_version); +} + +#if CONFIG_DEBUG_INTEL_ME +static inline void print_cap(const char *name, int state) +{ + printk(BIOS_DEBUG, "ME Capability: %-41s : %sabled\n", + name, state ? " en" : "dis"); +} + +/* Get ME Firmware Capabilities */ +static int mkhi_get_fwcaps(mbp_mefwcaps *cap) +{ + u32 rule_id = 0; + struct me_fwcaps cap_msg; + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_FWCAPS, + .command = MKHI_FWCAPS_GET_RULE, + }; + + /* Send request and wait for response */ + if (mei_sendrecv_mkhi(&mkhi, &rule_id, sizeof(u32), + &cap_msg, sizeof(cap_msg)) < 0) { + printk(BIOS_ERR, "ME: GET FWCAPS message failed\n"); + return -1; + } + *cap = cap_msg.caps_sku; + return 0; +} + +/* Get ME Firmware Capabilities */ +static void me_print_fwcaps(mbp_mefwcaps *cap) +{ + mbp_mefwcaps local_caps; + if (!cap) { + cap = &local_caps; + printk(BIOS_ERR, "ME: mbp missing fwcaps report\n"); + if (mkhi_get_fwcaps(cap)) + return; + } + + print_cap("Full Network manageability", cap->full_net); + print_cap("Regular Network manageability", cap->std_net); + print_cap("Manageability", cap->manageability); + print_cap("IntelR Anti-Theft (AT)", cap->intel_at); + print_cap("IntelR Capability Licensing Service (CLS)", cap->intel_cls); + print_cap("IntelR Power Sharing Technology (MPC)", cap->intel_mpc); + print_cap("ICC Over Clocking", cap->icc_over_clocking); + print_cap("Protected Audio Video Path (PAVP)", cap->pavp); + print_cap("IPV6", cap->ipv6); + print_cap("KVM Remote Control (KVM)", cap->kvm); + print_cap("Outbreak Containment Heuristic (OCH)", cap->och); + print_cap("Virtual LAN (VLAN)", cap->vlan); + print_cap("TLS", cap->tls); + print_cap("Wireless LAN (WLAN)", cap->wlan); +} +#endif + +/* Send END OF POST message to the ME */ +static int mkhi_end_of_post(void) +{ + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_GEN, + .command = MKHI_END_OF_POST, + }; + u32 eop_ack; + + /* Send request and wait for response */ + if (mei_sendrecv_mkhi(&mkhi, NULL, 0, &eop_ack, sizeof(eop_ack)) < 0) { + printk(BIOS_ERR, "ME: END OF POST message failed\n"); + return -1; + } + + printk(BIOS_INFO, "ME: END OF POST message successful (%d)\n", eop_ack); + return 0; +} + +/* Send END OF POST message to the ME */ +static int mkhi_end_of_post_noack(void) +{ + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_GEN, + .command = MKHI_END_OF_POST_NOACK, + }; + + /* Send request, do not wait for response */ + if (mei_sendrecv_mkhi(&mkhi, NULL, 0, NULL, 0) < 0) { + printk(BIOS_ERR, "ME: END OF POST NOACK message failed\n"); + return -1; + } + + printk(BIOS_INFO, "ME: END OF POST NOACK message successful\n"); + return 0; +} + +/* Send HMRFPO LOCK message to the ME */ +static int mkhi_hmrfpo_lock(void) +{ + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_HMRFPO, + .command = MKHI_HMRFPO_LOCK, + }; + u32 ack; + + /* Send request and wait for response */ + if (mei_sendrecv_mkhi(&mkhi, NULL, 0, &ack, sizeof(ack)) < 0) { + printk(BIOS_ERR, "ME: HMRFPO LOCK message failed\n"); + return -1; + } + + printk(BIOS_INFO, "ME: HMRPFO LOCK message successful (%d)\n", ack); + return 0; +} + +/* Send HMRFPO LOCK message to the ME, do not wait for response */ +static int mkhi_hmrfpo_lock_noack(void) +{ + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_HMRFPO, + .command = MKHI_HMRFPO_LOCK_NOACK, + }; + + /* Send request, do not wait for response */ + if (mei_sendrecv_mkhi(&mkhi, NULL, 0, NULL, 0) < 0) { + printk(BIOS_ERR, "ME: HMRFPO LOCK NOACK message failed\n"); + return -1; + } + + printk(BIOS_INFO, "ME: HMRPFO LOCK NOACK message successful\n"); + return 0; +} + +static void intel_me_finalize(device_t dev) +{ + u32 reg32; + + /* S3 path will have hidden this device already */ + if (!mei_base_address || mei_base_address == (u8*) 0xfffffff0) + return; + + /* Make sure IO is disabled */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 &= ~(PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | PCI_COMMAND_IO); + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Hide the PCI device */ + RCBA32_OR(FD2, PCH_DISABLE_MEI1); + RCBA32(FD2); +} + +static int me_icc_set_clock_enables(u32 mask) +{ + struct icc_clock_enables_msg clk = { + .clock_enables = 0, /* Turn off specified clocks */ + .clock_mask = mask, + .no_response = 1, /* Do not expect response */ + }; + struct icc_header icc = { + .api_version = ICC_API_VERSION_LYNXPOINT, + .icc_command = ICC_SET_CLOCK_ENABLES, + .length = sizeof(clk), + }; + + /* Send request and wait for response */ + if (mei_sendrecv_icc(&icc, &clk, sizeof(clk), NULL, 0) < 0) { + printk(BIOS_ERR, "ME: ICC SET CLOCK ENABLES message failed\n"); + return -1; + } else { + printk(BIOS_INFO, "ME: ICC SET CLOCK ENABLES 0x%08x\n", mask); + } + + return 0; +} + +/* Determine the path that we should take based on ME status */ +static me_bios_path intel_me_path(device_t dev) +{ + me_bios_path path = ME_DISABLE_BIOS_PATH; + struct me_hfs hfs; + struct me_hfs2 hfs2; + + /* Check and dump status */ + intel_me_status(); + + pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS); + pci_read_dword_ptr(dev, &hfs2, PCI_ME_HFS2); + + /* Check Current Working State */ + switch (hfs.working_state) { + case ME_HFS_CWS_NORMAL: + path = ME_NORMAL_BIOS_PATH; + break; + case ME_HFS_CWS_REC: + path = ME_RECOVERY_BIOS_PATH; + break; + default: + path = ME_DISABLE_BIOS_PATH; + break; + } + + /* Check Current Operation Mode */ + switch (hfs.operation_mode) { + case ME_HFS_MODE_NORMAL: + break; + case ME_HFS_MODE_DEBUG: + case ME_HFS_MODE_DIS: + case ME_HFS_MODE_OVER_JMPR: + case ME_HFS_MODE_OVER_MEI: + default: + path = ME_DISABLE_BIOS_PATH; + break; + } + + /* Check for any error code and valid firmware and MBP */ + if (hfs.error_code || hfs.fpt_bad) + path = ME_ERROR_BIOS_PATH; + + /* Check if the MBP is ready */ + if (!hfs2.mbp_rdy) { + printk(BIOS_CRIT, "%s: mbp is not ready!\n", + __FUNCTION__); + path = ME_ERROR_BIOS_PATH; + } + +#if CONFIG_ELOG + if (path != ME_NORMAL_BIOS_PATH) { + struct elog_event_data_me_extended data = { + .current_working_state = hfs.working_state, + .operation_state = hfs.operation_state, + .operation_mode = hfs.operation_mode, + .error_code = hfs.error_code, + .progress_code = hfs2.progress_code, + .current_pmevent = hfs2.current_pmevent, + .current_state = hfs2.current_state, + }; + elog_add_event_byte(ELOG_TYPE_MANAGEMENT_ENGINE, path); + elog_add_event_raw(ELOG_TYPE_MANAGEMENT_ENGINE_EXT, + &data, sizeof(data)); + } +#endif + + return path; +} + +/* Prepare ME for MEI messages */ +static int intel_mei_setup(device_t dev) +{ + struct resource *res; + struct mei_csr host; + u32 reg32; + + /* Find the MMIO base for the ME interface */ + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!res || res->base == 0 || res->size == 0) { + printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); + return -1; + } + mei_base_address = res2mmio(res, 0, 0); + + /* Ensure Memory and Bus Master bits are set */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Clean up status for next message */ + read_host_csr(&host); + host.interrupt_generate = 1; + host.ready = 1; + host.reset = 0; + write_host_csr(&host); + + return 0; +} + +/* Read the Extend register hash of ME firmware */ +static int intel_me_extend_valid(device_t dev) +{ + struct me_heres status; + u32 extend[8] = {0}; + int i, count = 0; + + pci_read_dword_ptr(dev, &status, PCI_ME_HERES); + if (!status.extend_feature_present) { + printk(BIOS_ERR, "ME: Extend Feature not present\n"); + return -1; + } + + if (!status.extend_reg_valid) { + printk(BIOS_ERR, "ME: Extend Register not valid\n"); + return -1; + } + + switch (status.extend_reg_algorithm) { + case PCI_ME_EXT_SHA1: + count = 5; + printk(BIOS_DEBUG, "ME: Extend SHA-1: "); + break; + case PCI_ME_EXT_SHA256: + count = 8; + printk(BIOS_DEBUG, "ME: Extend SHA-256: "); + break; + default: + printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n", + status.extend_reg_algorithm); + return -1; + } + + for (i = 0; i < count; ++i) { + extend[i] = pci_read_config32(dev, PCI_ME_HER(i)); + printk(BIOS_DEBUG, "%08x", extend[i]); + } + printk(BIOS_DEBUG, "\n"); + +#if CONFIG_CHROMEOS + /* Save hash in NVS for the OS to verify */ + chromeos_set_me_hash(extend, count); +#endif + + return 0; +} + +static void intel_me_print_mbp(me_bios_payload *mbp_data) +{ + me_print_fw_version(mbp_data->fw_version_name); + +#if CONFIG_DEBUG_INTEL_ME + me_print_fwcaps(mbp_data->fw_capabilities); +#endif + + if (mbp_data->plat_time) { + printk(BIOS_DEBUG, "ME: Wake Event to ME Reset: %u ms\n", + mbp_data->plat_time->wake_event_mrst_time_ms); + printk(BIOS_DEBUG, "ME: ME Reset to Platform Reset: %u ms\n", + mbp_data->plat_time->mrst_pltrst_time_ms); + printk(BIOS_DEBUG, "ME: Platform Reset to CPU Reset: %u ms\n", + mbp_data->plat_time->pltrst_cpurst_time_ms); + } +} + +static u32 me_to_host_words_pending(void) +{ + struct mei_csr me; + read_me_csr(&me); + if (!me.ready) + return 0; + return (me.buffer_write_ptr - me.buffer_read_ptr) & + (me.buffer_depth - 1); +} + +struct mbp_payload { + mbp_header header; + u32 data[0]; +}; + +/* + * Read and print ME MBP data + * + * Return -1 to indicate a problem (give up) + * Return 0 to indicate success (send LOCK+EOP) + * Return 1 to indicate success (send LOCK+EOP with NOACK) + */ +static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev) +{ + mbp_header mbp_hdr; + u32 me2host_pending; + struct mei_csr host; + struct me_hfs2 hfs2; + struct mbp_payload *mbp; + int i; + int ret = 0; + + pci_read_dword_ptr(dev, &hfs2, PCI_ME_HFS2); + + if (!hfs2.mbp_rdy) { + printk(BIOS_ERR, "ME: MBP not ready\n"); + intel_me_mbp_give_up(dev); + return -1; + } + + me2host_pending = me_to_host_words_pending(); + if (!me2host_pending) { + printk(BIOS_ERR, "ME: no mbp data!\n"); + intel_me_mbp_give_up(dev); + return -1; + } + + /* we know for sure that at least the header is there */ + mei_read_dword_ptr(&mbp_hdr, MEI_ME_CB_RW); + + if ((mbp_hdr.num_entries > (mbp_hdr.mbp_size / 2)) || + (me2host_pending < mbp_hdr.mbp_size)) { + printk(BIOS_ERR, "ME: mbp of %d entries, total size %d words" + " buffer contains %d words\n", + mbp_hdr.num_entries, mbp_hdr.mbp_size, + me2host_pending); + intel_me_mbp_give_up(dev); + return -1; + } + mbp = malloc(mbp_hdr.mbp_size * sizeof(u32)); + if (!mbp) { + intel_me_mbp_give_up(dev); + return -1; + } + + mbp->header = mbp_hdr; + me2host_pending--; + + i = 0; + while (i != me2host_pending) { + mei_read_dword_ptr(&mbp->data[i], MEI_ME_CB_RW); + i++; + } + + read_host_csr(&host); + + /* Check that read and write pointers are equal. */ + if (host.buffer_read_ptr != host.buffer_write_ptr) { + printk(BIOS_INFO, "ME: MBP Read/Write pointer mismatch\n"); + printk(BIOS_INFO, "ME: MBP Waiting for MBP cleared flag\n"); + + /* Tell ME that the host has finished reading the MBP. */ + host.interrupt_generate = 1; + host.reset = 0; + write_host_csr(&host); + + /* Wait for the mbp_cleared indicator. */ + intel_me_mbp_clear(dev); + } else { + /* Indicate NOACK messages should be used. */ + ret = 1; + } + + /* Dump out the MBP contents. */ +#if CONFIG_DEBUG_INTEL_ME + printk(BIOS_INFO, "ME MBP: Header: items: %d, size dw: %d\n", + mbp->header.num_entries, mbp->header.mbp_size); + for (i = 0; i < mbp->header.mbp_size - 1; i++) { + printk(BIOS_INFO, "ME MBP: %04x: 0x%08x\n", i, mbp->data[i]); + } +#endif + +#define ASSIGN_FIELD_PTR(field_,val_) \ + { \ + mbp_data->field_ = (typeof(mbp_data->field_))(void *)val_; \ + break; \ + } + + /* Setup the pointers in the me_bios_payload structure. */ + for (i = 0; i < mbp->header.mbp_size - 1;) { + mbp_item_header *item = (void *)&mbp->data[i]; + + switch(MBP_MAKE_IDENT(item->app_id, item->item_id)) { + case MBP_IDENT(KERNEL, FW_VER): + ASSIGN_FIELD_PTR(fw_version_name, &mbp->data[i+1]); + + case MBP_IDENT(ICC, PROFILE): + ASSIGN_FIELD_PTR(icc_profile, &mbp->data[i+1]); + + case MBP_IDENT(INTEL_AT, STATE): + ASSIGN_FIELD_PTR(at_state, &mbp->data[i+1]); + + case MBP_IDENT(KERNEL, FW_CAP): + ASSIGN_FIELD_PTR(fw_capabilities, &mbp->data[i+1]); + + case MBP_IDENT(KERNEL, ROM_BIST): + ASSIGN_FIELD_PTR(rom_bist_data, &mbp->data[i+1]); + + case MBP_IDENT(KERNEL, PLAT_KEY): + ASSIGN_FIELD_PTR(platform_key, &mbp->data[i+1]); + + case MBP_IDENT(KERNEL, FW_TYPE): + ASSIGN_FIELD_PTR(fw_plat_type, &mbp->data[i+1]); + + case MBP_IDENT(KERNEL, MFS_FAILURE): + ASSIGN_FIELD_PTR(mfsintegrity, &mbp->data[i+1]); + + case MBP_IDENT(KERNEL, PLAT_TIME): + ASSIGN_FIELD_PTR(plat_time, &mbp->data[i+1]); + + case MBP_IDENT(NFC, SUPPORT_DATA): + ASSIGN_FIELD_PTR(nfc_data, &mbp->data[i+1]); + } + i += item->length; + } + #undef ASSIGN_FIELD_PTR + + return ret; +} + +/* Check whether ME is present and do basic init */ +static void intel_me_init(device_t dev) +{ + config_t *config = dev->chip_info; + me_bios_path path = intel_me_path(dev); + me_bios_payload mbp_data; + int mbp_ret; + struct me_hfs hfs; + struct mei_csr csr; + + /* Do initial setup and determine the BIOS path */ + printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]); + + if (path == ME_NORMAL_BIOS_PATH) { + /* Validate the extend register */ + intel_me_extend_valid(dev); +} + + memset(&mbp_data, 0, sizeof(mbp_data)); + + /* + * According to the ME9 BWG, BIOS is required to fetch MBP data in + * all boot flows except S3 Resume. + */ + + /* Prepare MEI MMIO interface */ + if (intel_mei_setup(dev) < 0) + return; + + /* Read ME MBP data */ + mbp_ret = intel_me_read_mbp(&mbp_data, dev); + if (mbp_ret < 0) + return; + intel_me_print_mbp(&mbp_data); + + /* Set clock enables according to devicetree */ + if (config && config->icc_clock_disable) + me_icc_set_clock_enables(config->icc_clock_disable); + + /* Make sure ME is in a mode that expects EOP */ + pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS); + + /* Abort and leave device alone if not normal mode */ + if (hfs.fpt_bad || + hfs.working_state != ME_HFS_CWS_NORMAL || + hfs.operation_mode != ME_HFS_MODE_NORMAL) + return; + + if (mbp_ret) { + /* + * MBP Cleared wait is skipped, + * Do not expect ACK and reset when complete. + */ + + /* Send HMRFPO Lock command, no response */ + mkhi_hmrfpo_lock_noack(); + + /* Send END OF POST command, no response */ + mkhi_end_of_post_noack(); + + /* Assert reset and interrupt */ + read_host_csr(&csr); + csr.interrupt_generate = 1; + csr.reset = 1; + write_host_csr(&csr); + } else { + /* + * MBP Cleared wait was not skipped + */ + + /* Send HMRFPO LOCK command */ + mkhi_hmrfpo_lock(); + + /* Send EOP command so ME stops accepting other commands */ + mkhi_end_of_post(); + } +} + +static void intel_me_enable(device_t dev) +{ +#if CONFIG_HAVE_ACPI_RESUME + /* Avoid talking to the device in S3 path */ + if (acpi_slp_type == 3) { + dev->enabled = 0; + pch_disable_devfn(dev); + } +#endif +} + +static struct device_operations device_ops = { + .read_resources = &pci_dev_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .enable = &intel_me_enable, + .init = &intel_me_init, + .final = &intel_me_finalize, + .ops_pci = &broadwell_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { + 0x9c3a, /* Low Power */ + 0x9cba, /* WildcatPoint */ + 0 +}; + +static const struct pci_driver intel_me __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/soc/intel/skylake/me_status.c b/src/soc/intel/skylake/me_status.c new file mode 100644 index 0000000..867a9a9 --- /dev/null +++ b/src/soc/intel/skylake/me_status.c @@ -0,0 +1,321 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <stdlib.h> +#include <string.h> +#include <soc/pci_devs.h> +#include <soc/me.h> +#include <delay.h> + +static inline void me_read_dword_ptr(void *ptr, int offset) +{ + u32 dword = pci_read_config32(PCH_DEV_ME, offset); + memcpy(ptr, &dword, sizeof(dword)); +} + +#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) + +/* HFS1[3:0] Current Working State Values */ +static const char *me_cws_values[] = { + [ME_HFS_CWS_RESET] = "Reset", + [ME_HFS_CWS_INIT] = "Initializing", + [ME_HFS_CWS_REC] = "Recovery", + [3] = "Unknown (3)", + [4] = "Unknown (4)", + [ME_HFS_CWS_NORMAL] = "Normal", + [ME_HFS_CWS_WAIT] = "Platform Disable Wait", + [ME_HFS_CWS_TRANS] = "OP State Transition", + [ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In", + [9] = "Unknown (9)", + [10] = "Unknown (10)", + [11] = "Unknown (11)", + [12] = "Unknown (12)", + [13] = "Unknown (13)", + [14] = "Unknown (14)", + [15] = "Unknown (15)", +}; + +/* HFS1[8:6] Current Operation State Values */ +static const char *me_opstate_values[] = { + [ME_HFS_STATE_PREBOOT] = "Preboot", + [ME_HFS_STATE_M0_UMA] = "M0 with UMA", + [ME_HFS_STATE_M3] = "M3 without UMA", + [ME_HFS_STATE_M0] = "M0 without UMA", + [ME_HFS_STATE_BRINGUP] = "Bring up", + [ME_HFS_STATE_ERROR] = "M0 without UMA but with error" +}; + +/* HFS[19:16] Current Operation Mode Values */ +static const char *me_opmode_values[] = { + [ME_HFS_MODE_NORMAL] = "Normal", + [ME_HFS_MODE_DEBUG] = "Debug", + [ME_HFS_MODE_DIS] = "Soft Temporary Disable", + [ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper", + [ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message" +}; + +/* HFS[15:12] Error Code Values */ +static const char *me_error_values[] = { + [ME_HFS_ERROR_NONE] = "No Error", + [ME_HFS_ERROR_UNCAT] = "Uncategorized Failure", + [ME_HFS_ERROR_IMAGE] = "Image Failure", + [ME_HFS_ERROR_DEBUG] = "Debug Failure" +}; + +/* HFS2[31:28] ME Progress Code */ +static const char *me_progress_values[] = { + [ME_HFS2_PHASE_ROM] = "ROM Phase", + [ME_HFS2_PHASE_BUP] = "BUP Phase", + [ME_HFS2_PHASE_UKERNEL] = "uKernel Phase", + [ME_HFS2_PHASE_POLICY] = "Policy Module", + [ME_HFS2_PHASE_MODULE_LOAD] = "Module Loading", + [ME_HFS2_PHASE_UNKNOWN] = "Unknown", + [ME_HFS2_PHASE_HOST_COMM] = "Host Communication" +}; + +/* HFS2[27:24] Power Management Event */ +static const char *me_pmevent_values[] = { + [ME_HFS2_PMEVENT_CLEAN_MOFF_MX_WAKE] = + "Clean Moff->Mx wake", + [ME_HFS2_PMEVENT_MOFF_MX_WAKE_ERROR] = + "Moff->Mx wake after an error", + [ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET] = + "Clean global reset", + [ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET_ERROR] = + "Global reset after an error", + [ME_HFS2_PMEVENT_CLEAN_ME_RESET] = + "Clean Intel ME reset", + [ME_HFS2_PMEVENT_ME_RESET_EXCEPTION] = + "Intel ME reset due to exception", + [ME_HFS2_PMEVENT_PSEUDO_ME_RESET] = + "Pseudo-global reset", + [ME_HFS2_PMEVENT_S0MO_SXM3] = + "S0/M0->Sx/M3", + [ME_HFS2_PMEVENT_SXM3_S0M0] = + "Sx/M3->S0/M0", + [ME_HFS2_PMEVENT_NON_PWR_CYCLE_RESET] = + "Non-power cycle reset", + [ME_HFS2_PMEVENT_PWR_CYCLE_RESET_M3] = + "Power cycle reset through M3", + [ME_HFS2_PMEVENT_PWR_CYCLE_RESET_MOFF] = + "Power cycle reset through Moff", + [ME_HFS2_PMEVENT_SXMX_SXMOFF] = + "Sx/Mx->Sx/Moff" +}; + +/* Progress Code 0 states */ +static const char *me_progress_rom_values[] = { + [ME_HFS2_STATE_ROM_BEGIN] = "BEGIN", + [ME_HFS2_STATE_ROM_DISABLE] = "DISABLE" +}; + +/* Progress Code 1 states */ +static const char *me_progress_bup_values[] = { + [ME_HFS2_STATE_BUP_INIT] = + "Initialization starts", + [ME_HFS2_STATE_BUP_DIS_HOST_WAKE] = + "Disable the host wake event", + [ME_HFS2_STATE_BUP_FLOW_DET] = + "Flow determination start process", + [ME_HFS2_STATE_BUP_VSCC_ERR] = + "Error reading/matching the VSCC table in the descriptor", + [ME_HFS2_STATE_BUP_CHECK_STRAP] = + "Check to see if straps say ME DISABLED", + [ME_HFS2_STATE_BUP_PWR_OK_TIMEOUT] = + "Timeout waiting for PWROK", + [ME_HFS2_STATE_BUP_MANUF_OVRD_STRAP] = + "Possibly handle BUP manufacturing override strap", + [ME_HFS2_STATE_BUP_M3] = + "Bringup in M3", + [ME_HFS2_STATE_BUP_M0] = + "Bringup in M0", + [ME_HFS2_STATE_BUP_FLOW_DET_ERR] = + "Flow detection error", + [ME_HFS2_STATE_BUP_M3_CLK_ERR] = + "M3 clock switching error", + [ME_HFS2_STATE_BUP_CPU_RESET_DID_TIMEOUT_MEM_MISSING] = + "Host error - CPU reset timeout, DID timeout, memory missing", + [ME_HFS2_STATE_BUP_M3_KERN_LOAD] = + "M3 kernel load", + [ME_HFS2_STATE_BUP_T32_MISSING] = + "T34 missing - cannot program ICC", + [ME_HFS2_STATE_BUP_WAIT_DID] = + "Waiting for DID BIOS message", + [ME_HFS2_STATE_BUP_WAIT_DID_FAIL] = + "Waiting for DID BIOS message failure", + [ME_HFS2_STATE_BUP_DID_NO_FAIL] = + "DID reported no error", + [ME_HFS2_STATE_BUP_ENABLE_UMA] = + "Enabling UMA", + [ME_HFS2_STATE_BUP_ENABLE_UMA_ERR] = + "Enabling UMA error", + [ME_HFS2_STATE_BUP_SEND_DID_ACK] = + "Sending DID Ack to BIOS", + [ME_HFS2_STATE_BUP_SEND_DID_ACK_ERR] = + "Sending DID Ack to BIOS error", + [ME_HFS2_STATE_BUP_M0_CLK] = + "Switching clocks in M0", + [ME_HFS2_STATE_BUP_M0_CLK_ERR] = + "Switching clocks in M0 error", + [ME_HFS2_STATE_BUP_TEMP_DIS] = + "ME in temp disable", + [ME_HFS2_STATE_BUP_M0_KERN_LOAD] = + "M0 kernel load", +}; + +/* Progress Code 3 states */ +static const char *me_progress_policy_values[] = { + [ME_HFS2_STATE_POLICY_ENTRY] = "Entry into Policy Module", + [ME_HFS2_STATE_POLICY_RCVD_S3] = "Received S3 entry", + [ME_HFS2_STATE_POLICY_RCVD_S4] = "Received S4 entry", + [ME_HFS2_STATE_POLICY_RCVD_S5] = "Received S5 entry", + [ME_HFS2_STATE_POLICY_RCVD_UPD] = "Received UPD entry", + [ME_HFS2_STATE_POLICY_RCVD_PCR] = "Received PCR entry", + [ME_HFS2_STATE_POLICY_RCVD_NPCR] = "Received NPCR entry", + [ME_HFS2_STATE_POLICY_RCVD_HOST_WAKE] = "Received host wake", + [ME_HFS2_STATE_POLICY_RCVD_AC_DC] = "Received AC<>DC switch", + [ME_HFS2_STATE_POLICY_RCVD_DID] = "Received DRAM Init Done", + [ME_HFS2_STATE_POLICY_VSCC_NOT_FOUND] = + "VSCC Data not found for flash device", + [ME_HFS2_STATE_POLICY_VSCC_INVALID] = + "VSCC Table is not valid", + [ME_HFS2_STATE_POLICY_FPB_ERR] = + "Flash Partition Boundary is outside address space", + [ME_HFS2_STATE_POLICY_DESCRIPTOR_ERR] = + "ME cannot access the chipset descriptor region", + [ME_HFS2_STATE_POLICY_VSCC_NO_MATCH] = + "Required VSCC values for flash parts do not match", +}; + +void intel_me_status(void) +{ + struct me_hfs _hfs, *hfs = &_hfs; + struct me_hfs2 _hfs2, *hfs2 = &_hfs2; + + me_read_dword_ptr(hfs, PCI_ME_HFS); + me_read_dword_ptr(hfs2, PCI_ME_HFS2); + + /* Check Current States */ + printk(BIOS_DEBUG, "ME: FW Partition Table : %s\n", + hfs->fpt_bad ? "BAD" : "OK"); + printk(BIOS_DEBUG, "ME: Bringup Loader Failure : %s\n", + hfs->ft_bup_ld_flr ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Firmware Init Complete : %s\n", + hfs->fw_init_complete ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Manufacturing Mode : %s\n", + hfs->mfg_mode ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Boot Options Present : %s\n", + hfs->boot_options_present ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Update In Progress : %s\n", + hfs->update_in_progress ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Current Working State : %s\n", + me_cws_values[hfs->working_state]); + printk(BIOS_DEBUG, "ME: Current Operation State : %s\n", + me_opstate_values[hfs->operation_state]); + printk(BIOS_DEBUG, "ME: Current Operation Mode : %s\n", + me_opmode_values[hfs->operation_mode]); + printk(BIOS_DEBUG, "ME: Error Code : %s\n", + me_error_values[hfs->error_code]); + printk(BIOS_DEBUG, "ME: Progress Phase : %s\n", + me_progress_values[hfs2->progress_code]); + printk(BIOS_DEBUG, "ME: Power Management Event : %s\n", + me_pmevent_values[hfs2->current_pmevent]); + + printk(BIOS_DEBUG, "ME: Progress Phase State : "); + switch (hfs2->progress_code) { + case ME_HFS2_PHASE_ROM: /* ROM Phase */ + printk(BIOS_DEBUG, "%s", + me_progress_rom_values[hfs2->current_state]); + break; + + case ME_HFS2_PHASE_UKERNEL: /* uKernel Phase */ + printk(BIOS_DEBUG, "0x%02x", hfs2->current_state); + break; + + case ME_HFS2_PHASE_BUP: /* Bringup Phase */ + if (hfs2->current_state < ARRAY_SIZE(me_progress_bup_values) + && me_progress_bup_values[hfs2->current_state]) + printk(BIOS_DEBUG, "%s", + me_progress_bup_values[hfs2->current_state]); + else + printk(BIOS_DEBUG, "0x%02x", hfs2->current_state); + break; + + case ME_HFS2_PHASE_POLICY: /* Policy Module Phase */ + if (hfs2->current_state < ARRAY_SIZE(me_progress_policy_values) + && me_progress_policy_values[hfs2->current_state]) + printk(BIOS_DEBUG, "%s", + me_progress_policy_values[hfs2->current_state]); + else + printk(BIOS_DEBUG, "0x%02x", hfs2->current_state); + break; + + case ME_HFS2_PHASE_HOST_COMM: /* Host Communication Phase */ + if (!hfs2->current_state) + printk(BIOS_DEBUG, "Host communication established"); + else + printk(BIOS_DEBUG, "0x%02x", hfs2->current_state); + break; + + default: + printk(BIOS_DEBUG, "Unknown phase: 0x%02x state: 0x%02x", + hfs2->progress_code, hfs2->current_state); + } + printk(BIOS_DEBUG, "\n"); +} +#endif + +void intel_me_hsio_version(uint16_t *version, uint16_t *checksum) +{ + int count; + u32 hsiover; + struct me_hfs hfs; + + /* Query for HSIO version, overloads H_GS and HFS */ + pci_write_config32(PCH_DEV_ME, PCI_ME_H_GS, + ME_HSIO_MESSAGE | ME_HSIO_CMD_GETHSIOVER); + + /* Must wait for ME acknowledgement */ + for (count = ME_RETRY; count > 0; --count) { + me_read_dword_ptr(&hfs, PCI_ME_HFS); + if (hfs.bios_msg_ack) + break; + udelay(ME_DELAY); + } + if (!count) { + printk(BIOS_ERR, "ERROR: ME failed to respond\n"); + return; + } + + /* HSIO version should be in HFS_5 */ + hsiover = pci_read_config32(PCH_DEV_ME, PCI_ME_HFS5); + *version = hsiover >> 16; + *checksum = hsiover & 0xffff; + + printk(BIOS_DEBUG, "ME: HSIO Version : %d (CRC 0x%04x)\n", + *version, *checksum); + + /* Reset registers to normal behavior */ + pci_write_config32(PCH_DEV_ME, PCI_ME_H_GS, + ME_HSIO_MESSAGE | ME_HSIO_CMD_GETHSIOVER); +} diff --git a/src/soc/intel/skylake/memmap.c b/src/soc/intel/skylake/memmap.c new file mode 100644 index 0000000..7b8df28 --- /dev/null +++ b/src/soc/intel/skylake/memmap.c @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <cbmem.h> +#include <device/pci.h> +#include <soc/pci_devs.h> +#include <soc/systemagent.h> + +static uintptr_t dpr_region_start(void) +{ + /* + * Base of DPR is top of usable DRAM below 4GiB. The register has + * 1 MiB alignment and reports the TOP of the range, the base + * must be calculated from the size in MiB in bits 11:4. + */ + uintptr_t dpr = pci_read_config32(SA_DEV_ROOT, DPR); + uintptr_t tom = dpr & ~((1 << 20) - 1); + + /* Subtract DMA Protected Range size if enabled */ + if (dpr & DPR_EPM) + tom -= (dpr & DPR_SIZE_MASK) << 16; + + return tom; +} + +void *cbmem_top(void) +{ + return (void *) dpr_region_start(); +} diff --git a/src/soc/intel/skylake/microcode/Makefile.inc b/src/soc/intel/skylake/microcode/Makefile.inc new file mode 100644 index 0000000..bf9e345 --- /dev/null +++ b/src/soc/intel/skylake/microcode/Makefile.inc @@ -0,0 +1 @@ +cpu_microcode-y += microcode_blob.c diff --git a/src/soc/intel/skylake/microcode/microcode_blob.c b/src/soc/intel/skylake/microcode/microcode_blob.c new file mode 100644 index 0000000..4f06cb2 --- /dev/null +++ b/src/soc/intel/skylake/microcode/microcode_blob.c @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +unsigned microcode[] = { +#include "../../../../../3rdparty/blobs/soc/intel/broadwell/microcode_blob.h" +}; + diff --git a/src/soc/intel/skylake/minihd.c b/src/soc/intel/skylake/minihd.c new file mode 100644 index 0000000..ac5af8d --- /dev/null +++ b/src/soc/intel/skylake/minihd.c @@ -0,0 +1,128 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include <delay.h> +#include <stdlib.h> +#include <soc/intel/common/hda_verb.h> +#include <soc/ramstage.h> + +static const u32 minihd_verb_table[] = { + /* coreboot specific header */ + 0x80862807, // Codec Vendor / Device ID: Intel Mini-HD + 0x00000000, // Subsystem ID + 0x00000004, // Number of jacks + + /* Enable 3rd Pin and Converter Widget */ + 0x00878101, + + /* Pin Widget 5 - PORT B */ + 0x00571C10, + 0x00571D00, + 0x00571E56, + 0x00571F18, + + /* Pin Widget 6 - PORT C */ + 0x00671C20, + 0x00671D00, + 0x00671E56, + 0x00671F18, + + /* Pin Widget 7 - PORT D */ + 0x00771C30, + 0x00771D00, + 0x00771E56, + 0x00771F18, + + /* Disable 3rd Pin and Converter Widget */ + 0x00878100, + + /* Dummy entries to fill out the table */ + 0x00878100, + 0x00878100, +}; + +static void minihd_init(struct device *dev) +{ + struct resource *res; + u8 *base, reg32; + int codec_mask, i; + + /* Find base address */ + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!res) + return; + + base = res2mmio(res, 0, 0); + printk(BIOS_DEBUG, "Mini-HD: base = %p\n", base); + + /* Set Bus Master */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); + + /* Mini-HD configuration */ + reg32 = read32(base + 0x100c); + reg32 &= 0xfffc0000; + reg32 |= 0x4; + write32(base + 0x100c, reg32); + + reg32 = read32(base + 0x1010); + reg32 &= 0xfffc0000; + reg32 |= 0x4b; + write32(base + 0x1010, reg32); + + /* Init the codec and write the verb table */ + codec_mask = hda_codec_detect(base); + + if (codec_mask) { + for (i = 3; i >= 0; i--) { + if (codec_mask & (1 << i)) + hda_codec_init(base, i, + sizeof(minihd_verb_table), + minihd_verb_table); + } + } +} + +static struct device_operations minihd_ops = { + .read_resources = &pci_dev_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .init = &minihd_init, + .ops_pci = &broadwell_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { + 0x0a0c, /* Haswell */ + 0x160c, /* Broadwell */ + 0 +}; + +static const struct pci_driver minihd_driver __pci_driver = { + .ops = &minihd_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/soc/intel/skylake/monotonic_timer.c b/src/soc/intel/skylake/monotonic_timer.c new file mode 100644 index 0000000..39134ef --- /dev/null +++ b/src/soc/intel/skylake/monotonic_timer.c @@ -0,0 +1,63 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <cpu/x86/msr.h> +#include <timer.h> +#include <soc/msr.h> + +static struct monotonic_counter { + int initialized; + struct mono_time time; + uint32_t last_value; +} mono_counter; + +static inline uint32_t read_counter_msr(void) +{ + /* Even though the MSR is 64-bit it is assumed that the hardware + * is polled frequently enough to only use the lower 32-bits. */ + msr_t counter_msr; + + counter_msr = rdmsr(MSR_COUNTER_24_MHZ); + + return counter_msr.lo; +} + +void timer_monotonic_get(struct mono_time *mt) +{ + uint32_t current_tick; + uint32_t usecs_elapsed; + + if (!mono_counter.initialized) { + mono_counter.last_value = read_counter_msr(); + mono_counter.initialized = 1; + } + + current_tick = read_counter_msr(); + usecs_elapsed = (current_tick - mono_counter.last_value) / 24; + + /* Update current time and tick values only if a full tick occurred. */ + if (usecs_elapsed) { + mono_time_add_usecs(&mono_counter.time, usecs_elapsed); + mono_counter.last_value = current_tick; + } + + /* Save result. */ + *mt = mono_counter.time; +} diff --git a/src/soc/intel/skylake/pch.c b/src/soc/intel/skylake/pch.c new file mode 100644 index 0000000..ab546e8 --- /dev/null +++ b/src/soc/intel/skylake/pch.c @@ -0,0 +1,221 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <delay.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_def.h> +#include <soc/iobp.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <soc/ramstage.h> +#include <soc/rcba.h> +#include <soc/serialio.h> +#include <soc/spi.h> + +u8 pch_revision(void) +{ + return pci_read_config8(PCH_DEV_LPC, PCI_REVISION_ID); +} + +u16 pch_type(void) +{ + return pci_read_config16(PCH_DEV_LPC, PCI_DEVICE_ID); +} + +/* Return 1 if PCH type is WildcatPoint */ +int pch_is_wpt(void) +{ + return ((pch_type() & 0xfff0) == 0x9cc0) ? 1 : 0; +} + +/* Return 1 if PCH type is WildcatPoint ULX */ +int pch_is_wpt_ulx(void) +{ + u16 lpcid = pch_type(); + + switch (lpcid) { + case PCH_WPT_BDW_Y_SAMPLE: + case PCH_WPT_BDW_Y_PREMIUM: + case PCH_WPT_BDW_Y_BASE: + return 1; + } + + return 0; +} + +u32 pch_read_soft_strap(int id) +{ + u32 fdoc; + + fdoc = SPIBAR32(SPIBAR_FDOC); + fdoc &= ~0x00007ffc; + SPIBAR32(SPIBAR_FDOC) = fdoc; + + fdoc |= 0x00004000; + fdoc |= id * 4; + SPIBAR32(SPIBAR_FDOC) = fdoc; + + return SPIBAR32(SPIBAR_FDOD); +} + +#ifndef __PRE_RAM__ + +/* Put device in D3Hot Power State */ +static void pch_enable_d3hot(device_t dev) +{ + u32 reg32 = pci_read_config32(dev, PCH_PCS); + reg32 |= PCH_PCS_PS_D3HOT; + pci_write_config32(dev, PCH_PCS, reg32); +} + +/* RCBA function disable and posting read to flush the transaction */ +static void rcba_function_disable(u32 reg, u32 bit) +{ + RCBA32_OR(reg, bit); + RCBA32(reg); +} + +/* Set bit in Function Disable register to hide this device */ +void pch_disable_devfn(device_t dev) +{ + switch (dev->path.pci.devfn) { + case PCH_DEVFN_ADSP: /* Audio DSP */ + rcba_function_disable(FD, PCH_DISABLE_ADSPD); + break; + case PCH_DEVFN_XHCI: /* XHCI */ + rcba_function_disable(FD, PCH_DISABLE_XHCI); + break; + case PCH_DEVFN_SDMA: /* DMA */ + pch_enable_d3hot(dev); + pch_iobp_update(SIO_IOBP_FUNCDIS0, ~0UL, SIO_IOBP_FUNCDIS_DIS); + break; + case PCH_DEVFN_I2C0: /* I2C0 */ + pch_enable_d3hot(dev); + pch_iobp_update(SIO_IOBP_FUNCDIS1, ~0UL, SIO_IOBP_FUNCDIS_DIS); + break; + case PCH_DEVFN_I2C1: /* I2C1 */ + pch_enable_d3hot(dev); + pch_iobp_update(SIO_IOBP_FUNCDIS2, ~0UL, SIO_IOBP_FUNCDIS_DIS); + break; + case PCH_DEVFN_SPI0: /* SPI0 */ + pch_enable_d3hot(dev); + pch_iobp_update(SIO_IOBP_FUNCDIS3, ~0UL, SIO_IOBP_FUNCDIS_DIS); + break; + case PCH_DEVFN_SPI1: /* SPI1 */ + pch_enable_d3hot(dev); + pch_iobp_update(SIO_IOBP_FUNCDIS4, ~0UL, SIO_IOBP_FUNCDIS_DIS); + break; + case PCH_DEVFN_UART0: /* UART0 */ + pch_enable_d3hot(dev); + pch_iobp_update(SIO_IOBP_FUNCDIS5, ~0UL, SIO_IOBP_FUNCDIS_DIS); + break; + case PCH_DEVFN_UART1: /* UART1 */ + pch_enable_d3hot(dev); + pch_iobp_update(SIO_IOBP_FUNCDIS6, ~0UL, SIO_IOBP_FUNCDIS_DIS); + break; + case PCH_DEVFN_ME: /* MEI #1 */ + rcba_function_disable(FD2, PCH_DISABLE_MEI1); + break; + case PCH_DEVFN_ME_2: /* MEI #2 */ + rcba_function_disable(FD2, PCH_DISABLE_MEI2); + break; + case PCH_DEVFN_ME_IDER: /* IDE-R */ + rcba_function_disable(FD2, PCH_DISABLE_IDER); + break; + case PCH_DEVFN_ME_KT: /* KT */ + rcba_function_disable(FD2, PCH_DISABLE_KT); + break; + case PCH_DEVFN_SDIO: /* SDIO */ + pch_enable_d3hot(dev); + pch_iobp_update(SIO_IOBP_FUNCDIS7, ~0UL, SIO_IOBP_FUNCDIS_DIS); + break; + case PCH_DEVFN_GBE: /* Gigabit Ethernet */ + rcba_function_disable(BUC, PCH_DISABLE_GBE); + break; + case PCH_DEVFN_HDA: /* HD Audio Controller */ + rcba_function_disable(FD, PCH_DISABLE_HD_AUDIO); + break; + case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 0): /* PCI Express Root Port 1 */ + case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 1): /* PCI Express Root Port 2 */ + case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 2): /* PCI Express Root Port 3 */ + case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 3): /* PCI Express Root Port 4 */ + case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 4): /* PCI Express Root Port 5 */ + case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 5): /* PCI Express Root Port 6 */ + case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 6): /* PCI Express Root Port 7 */ + case PCI_DEVFN(PCH_DEV_SLOT_PCIE, 7): /* PCI Express Root Port 8 */ + rcba_function_disable(FD, + PCH_DISABLE_PCIE(PCI_FUNC(dev->path.pci.devfn))); + break; + case PCH_DEVFN_EHCI: /* EHCI #1 */ + rcba_function_disable(FD, PCH_DISABLE_EHCI1); + break; + case PCH_DEVFN_LPC: /* LPC */ + rcba_function_disable(FD, PCH_DISABLE_LPC); + break; + case PCH_DEVFN_SATA: /* SATA #1 */ + rcba_function_disable(FD, PCH_DISABLE_SATA1); + break; + case PCH_DEVFN_SMBUS: /* SMBUS */ + rcba_function_disable(FD, PCH_DISABLE_SMBUS); + break; + case PCH_DEVFN_SATA2: /* SATA #2 */ + rcba_function_disable(FD, PCH_DISABLE_SATA2); + break; + case PCH_DEVFN_THERMAL: /* Thermal Subsystem */ + rcba_function_disable(FD, PCH_DISABLE_THERMAL); + break; + } +} + +void broadwell_pch_enable_dev(device_t dev) +{ + u32 reg32; + + /* These devices need special enable/disable handling */ + switch (PCI_SLOT(dev->path.pci.devfn)) { + case PCH_DEV_SLOT_PCIE: + case PCH_DEV_SLOT_EHCI: + case PCH_DEV_SLOT_HDA: + return; + } + + if (!dev->enabled) { + printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev)); + + /* Ensure memory, io, and bus master are all disabled */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 &= ~(PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | PCI_COMMAND_IO); + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Disable this device if possible */ + pch_disable_devfn(dev); + } else { + /* Enable SERR */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_SERR; + pci_write_config32(dev, PCI_COMMAND, reg32); + } +} + +#endif diff --git a/src/soc/intel/skylake/pcie.c b/src/soc/intel/skylake/pcie.c new file mode 100644 index 0000000..895df93 --- /dev/null +++ b/src/soc/intel/skylake/pcie.c @@ -0,0 +1,710 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pciexp.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <soc/gpio.h> +#include <soc/lpc.h> +#include <soc/iobp.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <soc/rcba.h> +#include <soc/intel/broadwell/chip.h> +#include <soc/cpu.h> +#include <delay.h> + +static void pcie_update_cfg8(device_t dev, int reg, u8 mask, u8 or); +static void pcie_update_cfg(device_t dev, int reg, u32 mask, u32 or); + +/* Low Power variant has 6 root ports. */ +#define NUM_ROOT_PORTS 6 + +struct root_port_config { + /* RPFN is a write-once register so keep a copy until it is written */ + u32 orig_rpfn; + u32 new_rpfn; + u32 pin_ownership; + u32 strpfusecfg1; + u32 strpfusecfg2; + u32 strpfusecfg3; + u32 b0d28f0_32c; + u32 b0d28f4_32c; + u32 b0d28f5_32c; + int coalesce; + int gbe_port; + int num_ports; + device_t ports[NUM_ROOT_PORTS]; +}; + +static struct root_port_config rpc; + +static inline int root_port_is_first(device_t dev) +{ + return PCI_FUNC(dev->path.pci.devfn) == 0; +} + +static inline int root_port_is_last(device_t dev) +{ + return PCI_FUNC(dev->path.pci.devfn) == (rpc.num_ports - 1); +} + +/* Root ports are numbered 1..N in the documentation. */ +static inline int root_port_number(device_t dev) +{ + return PCI_FUNC(dev->path.pci.devfn) + 1; +} + +static void root_port_config_update_gbe_port(void) +{ + /* Is the Gbe Port enabled? */ + if (!((rpc.strpfusecfg1 >> 19) & 1)) + return; + + switch ((rpc.strpfusecfg1 >> 16) & 0x7) { + case 0: + rpc.gbe_port = 3; + break; + case 1: + rpc.gbe_port = 4; + break; + case 2: + case 3: + case 4: + case 5: + /* Lanes 0-4 of Root Port 5. */ + rpc.gbe_port = 5; + break; + default: + printk(BIOS_DEBUG, "Invalid GbE Port Selection.\n"); + } +} + +static void pcie_iosf_port_grant_count(device_t dev) +{ + u8 update_val; + u32 rpcd = (pci_read_config32(dev, 0xfc) > 14) & 0x3; + + switch (rpcd) { + case 1: + case 3: + update_val = 0x02; + break; + case 2: + update_val = 0x22; + break; + default: + update_val = 0x00; + break; + } + + RCBA32(0x103C) = (RCBA32(0x103C) & (~0xff)) | update_val; +} + +static void root_port_init_config(device_t dev) +{ + int rp; + u32 data; + u8 resp, id; + + if (root_port_is_first(dev)) { + rpc.orig_rpfn = RCBA32(RPFN); + rpc.new_rpfn = rpc.orig_rpfn; + rpc.num_ports = NUM_ROOT_PORTS; + rpc.gbe_port = -1; + /* RP0 f5[3:0] = 0101b*/ + pcie_update_cfg8(dev, 0xf5, ~0xa, 0x5); + + pcie_iosf_port_grant_count(dev); + + rpc.pin_ownership = pci_read_config32(dev, 0x410); + root_port_config_update_gbe_port(); + + pcie_update_cfg8(dev, 0xe2, ~(3 << 4), (3 << 4)); + if (dev->chip_info != NULL) { + config_t *config = dev->chip_info; + rpc.coalesce = config->pcie_port_coalesce; + } + } + + rp = root_port_number(dev); + if (rp > rpc.num_ports) { + printk(BIOS_ERR, "Found Root Port %d, expecting %d\n", + rp, rpc.num_ports); + return; + } + + /* Read the fuse configuration and pin ownership. */ + switch (rp) { + case 1: + rpc.strpfusecfg1 = pci_read_config32(dev, 0xfc); + rpc.b0d28f0_32c = pci_read_config32(dev, 0x32c); + break; + case 5: + rpc.strpfusecfg2 = pci_read_config32(dev, 0xfc); + rpc.b0d28f4_32c = pci_read_config32(dev, 0x32c); + break; + case 6: + rpc.b0d28f5_32c = pci_read_config32(dev, 0x32c); + rpc.strpfusecfg3 = pci_read_config32(dev, 0xfc); + break; + default: + break; + } + + pcie_update_cfg(dev, 0x418, 0, 0x02000430); + + if (root_port_is_first(dev)) { + /* + * set RP0 PCICFG E2h[5:4] = 11b and E1h[6] = 1 + * before configuring ASPM + */ + id = 0xe0 + (u8)(RCBA32(RPFN) & 0x07); + pch_iobp_exec(0xE00000E0, IOBP_PCICFG_READ, id, &data, &resp); + data |= ((0x30 << 16) | (0x40 << 8)); + pch_iobp_exec(0xE00000E0, IOBP_PCICFG_WRITE, id, &data, &resp); + } + + /* Cache pci device. */ + rpc.ports[rp - 1] = dev; +} + +/* Update devicetree with new Root Port function number assignment */ +static void pch_pcie_device_set_func(int index, int pci_func) +{ + device_t dev; + unsigned new_devfn; + + dev = rpc.ports[index]; + + /* Set the new PCI function field for this Root Port. */ + rpc.new_rpfn &= ~RPFN_FNMASK(index); + rpc.new_rpfn |= RPFN_FNSET(index, pci_func); + + /* Determine the new devfn for this port */ + new_devfn = PCI_DEVFN(PCH_DEV_SLOT_PCIE, pci_func); + + if (dev->path.pci.devfn != new_devfn) { + printk(BIOS_DEBUG, + "PCH: PCIe map %02x.%1x -> %02x.%1x\n", + PCI_SLOT(dev->path.pci.devfn), + PCI_FUNC(dev->path.pci.devfn), + PCI_SLOT(new_devfn), PCI_FUNC(new_devfn)); + + dev->path.pci.devfn = new_devfn; + } +} + +static void pcie_enable_clock_gating(void) +{ + int i; + int enabled_ports = 0; + int is_broadwell = !!(cpu_family_model() == BROADWELL_FAMILY_ULT); + + for (i = 0; i < rpc.num_ports; i++) { + device_t dev; + int rp; + + dev = rpc.ports[i]; + rp = root_port_number(dev); + + if (!dev->enabled) { + /* Configure shared resource clock gating. */ + if (rp == 1 || rp == 5 || rp == 6) + pcie_update_cfg8(dev, 0xe1, 0xc3, 0x3c); + + pcie_update_cfg8(dev, 0xe2, ~(3 << 4), (3 << 4)); + pcie_update_cfg(dev, 0x420, ~(1 << 31), (1 << 31)); + + /* Per-Port CLKREQ# handling. */ + if (gpio_is_native(18 + rp - 1)) + pcie_update_cfg(dev, 0x420, ~0, (3 << 29)); + + /* Enable static clock gating. */ + if (rp == 1 && !rpc.ports[1]->enabled && + !rpc.ports[2]->enabled && !rpc.ports[3]->enabled) { + pcie_update_cfg8(dev, 0xe2, ~1, 1); + pcie_update_cfg8(dev, 0xe1, 0x7f, 0x80); + } else if (rp == 5 || rp == 6) { + pcie_update_cfg8(dev, 0xe2, ~1, 1); + pcie_update_cfg8(dev, 0xe1, 0x7f, 0x80); + } + continue; + } + + enabled_ports++; + + /* Enable dynamic clock gating. */ + pcie_update_cfg8(dev, 0xe1, 0xfc, 0x03); + pcie_update_cfg8(dev, 0xe2, ~(1 << 6), (1 << 6)); + pcie_update_cfg8(dev, 0xe8, ~(3 << 2), (2 << 2)); + + /* Update PECR1 register. */ + pcie_update_cfg8(dev, 0xe8, ~0, 3); + if (is_broadwell) { + pcie_update_cfg(dev, 0x324, ~((1 << 5) | (1 << 14)), + ((1 << 5) | (1 << 14))); + } else { + pcie_update_cfg(dev, 0x324, ~(1 << 5), (1 << 5)); + } + /* Per-Port CLKREQ# handling. */ + if (gpio_is_native(18 + rp - 1)) + /* + * In addition to D28Fx PCICFG 420h[30:29] = 11b, + * set 420h[17] = 0b and 420[0] = 1b for L1 SubState. + */ + pcie_update_cfg(dev, 0x420, ~0x20000, (3 << 29) | 1); + + /* Configure shared resource clock gating. */ + if (rp == 1 || rp == 5 || rp == 6) + pcie_update_cfg8(dev, 0xe1, 0xc3, 0x3c); + + /* CLKREQ# VR Idle Enable */ + RCBA32_OR(0x2b1c, (1 << (16 + i))); + } + + if (!enabled_ports) + pcie_update_cfg8(rpc.ports[0], 0xe1, ~(1 << 6), (1 << 6)); +} + +static void root_port_commit_config(void) +{ + int i; + + /* If the first root port is disabled the coalesce ports. */ + if (!rpc.ports[0]->enabled) + rpc.coalesce = 1; + + /* Perform clock gating configuration. */ + pcie_enable_clock_gating(); + + for (i = 0; i < rpc.num_ports; i++) { + device_t dev; + u32 reg32; + int n = 0; + + dev = rpc.ports[i]; + + if (dev == NULL) { + printk(BIOS_ERR, "Root Port %d device is NULL?\n", i+1); + continue; + } + + if (dev->enabled) + continue; + + printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev)); + + /* 8.2 Configuration of PCI Express Root Ports */ + pcie_update_cfg(dev, 0x338, ~(1 << 26), 1 << 26); + + do { + reg32 = pci_read_config32(dev, 0x328); + n++; + if (((reg32 & 0xff000000) == 0x01000000) || (n > 50)) + break; + udelay(100); + } while (1); + + if (n > 50) + printk(BIOS_DEBUG, "%s: Timeout waiting for 328h\n", + dev_path(dev)); + + pcie_update_cfg(dev, 0x408, ~(1 << 27), 1 << 27); + + /* Disable this device if possible */ + pch_disable_devfn(dev); + } + + if (rpc.coalesce) { + int current_func; + + /* For all Root Ports N enabled ports get assigned the lower + * PCI function number. The disabled ones get upper PCI + * function numbers. */ + current_func = 0; + for (i = 0; i < rpc.num_ports; i++) { + if (!rpc.ports[i]->enabled) + continue; + pch_pcie_device_set_func(i, current_func); + current_func++; + } + + /* Allocate the disabled devices' PCI function number. */ + for (i = 0; i < rpc.num_ports; i++) { + if (rpc.ports[i]->enabled) + continue; + pch_pcie_device_set_func(i, current_func); + current_func++; + } + } + + printk(BIOS_SPEW, "PCH: RPFN 0x%08x -> 0x%08x\n", + rpc.orig_rpfn, rpc.new_rpfn); + RCBA32(RPFN) = rpc.new_rpfn; +} + +static void root_port_mark_disable(device_t dev) +{ + /* Mark device as disabled. */ + dev->enabled = 0; + /* Mark device to be hidden. */ + rpc.new_rpfn |= RPFN_HIDE(PCI_FUNC(dev->path.pci.devfn)); +} + +static void root_port_check_disable(device_t dev) +{ + int rp; + + /* Device already disabled. */ + if (!dev->enabled) { + root_port_mark_disable(dev); + return; + } + + rp = root_port_number(dev); + + /* Is the GbE port mapped to this Root Port? */ + if (rp == rpc.gbe_port) { + root_port_mark_disable(dev); + return; + } + + /* Check Root Port Configuration. */ + switch (rp) { + case 2: + /* Root Port 2 is disabled for all lane configurations + * but config 00b (4x1 links). */ + if ((rpc.strpfusecfg1 >> 14) & 0x3) { + root_port_mark_disable(dev); + return; + } + break; + case 3: + /* Root Port 3 is disabled in config 11b (1x4 links). */ + if (((rpc.strpfusecfg1 >> 14) & 0x3) == 0x3) { + root_port_mark_disable(dev); + return; + } + break; + case 4: + /* Root Port 4 is disabled in configs 11b (1x4 links) + * and 10b (2x2 links). */ + if ((rpc.strpfusecfg1 >> 14) & 0x2) { + root_port_mark_disable(dev); + return; + } + break; + } + + /* Check Pin Ownership. */ + switch (rp) { + case 1: + /* Bit 0 is Root Port 1 ownership. */ + if ((rpc.pin_ownership & 0x1) == 0) { + root_port_mark_disable(dev); + return; + } + break; + case 2: + /* Bit 2 is Root Port 2 ownership. */ + if ((rpc.pin_ownership & 0x4) == 0) { + root_port_mark_disable(dev); + return; + } + break; + case 6: + /* Bits 7:4 are Root Port 6 pin-lane ownership. */ + if ((rpc.pin_ownership & 0xf0) == 0) { + root_port_mark_disable(dev); + return; + } + break; + } +} + +static void pcie_update_cfg8(device_t dev, int reg, u8 mask, u8 or) +{ + u8 reg8; + + reg8 = pci_read_config8(dev, reg); + reg8 &= mask; + reg8 |= or; + pci_write_config8(dev, reg, reg8); +} + +static void pcie_update_cfg(device_t dev, int reg, u32 mask, u32 or) +{ + u32 reg32; + + reg32 = pci_read_config32(dev, reg); + reg32 &= mask; + reg32 |= or; + pci_write_config32(dev, reg, reg32); +} + +static void pcie_add_0x0202000_iobp(u32 reg) +{ + u32 reg32; + + reg32 = pch_iobp_read(reg); + reg32 += (0x2 << 16) | (0x2 << 8); + pch_iobp_write(reg, reg32); +} + +static void pch_pcie_early(struct device *dev) +{ + config_t *config = dev->chip_info; + int do_aspm = 0; + int rp = root_port_number(dev); + + switch (rp) { + case 1: + case 2: + case 3: + case 4: + /* + * Bits 31:28 of b0d28f0 0x32c register correspond to + * Root Ports 4:1. + */ + do_aspm = !!(rpc.b0d28f0_32c & (1 << (28 + rp - 1))); + break; + case 5: + /* + * Bit 28 of b0d28f4 0x32c register correspond to + * Root Ports 4:1. + */ + do_aspm = !!(rpc.b0d28f4_32c & (1 << 28)); + break; + case 6: + /* + * Bit 28 of b0d28f5 0x32c register correspond to + * Root Ports 4:1. + */ + do_aspm = !!(rpc.b0d28f5_32c & (1 << 28)); + break; + } + + /* Allow ASPM to be forced on in devicetree */ + if (config && (config->pcie_port_force_aspm & (1 << (rp - 1)))) + do_aspm = 1; + + printk(BIOS_DEBUG, "PCIe Root Port %d ASPM is %sabled\n", + rp, do_aspm ? "en" : "dis"); + + if (do_aspm) { + /* Set ASPM bits in MPC2 register. */ + pcie_update_cfg(dev, 0xd4, ~(0x3 << 2), (1 << 4) | (0x2 << 2)); + + /* Set unique clock exit latency in MPC register. */ + pcie_update_cfg(dev, 0xd8, ~(0x7 << 18), (0x7 << 18)); + + switch (rp) { + case 1: + pcie_add_0x0202000_iobp(0xe9002440); + break; + case 2: + pcie_add_0x0202000_iobp(0xe9002640); + break; + case 3: + pcie_add_0x0202000_iobp(0xe9000840); + break; + case 4: + pcie_add_0x0202000_iobp(0xe9000a40); + break; + case 5: + pcie_add_0x0202000_iobp(0xe9000c40); + pcie_add_0x0202000_iobp(0xe9000e40); + pcie_add_0x0202000_iobp(0xe9001040); + pcie_add_0x0202000_iobp(0xe9001240); + break; + case 6: + /* Update IOBP based on lane ownership. */ + if (rpc.pin_ownership & (1 << 4)) + pcie_add_0x0202000_iobp(0xea002040); + if (rpc.pin_ownership & (1 << 5)) + pcie_add_0x0202000_iobp(0xea002240); + if (rpc.pin_ownership & (1 << 6)) + pcie_add_0x0202000_iobp(0xea002440); + if (rpc.pin_ownership & (1 << 7)) + pcie_add_0x0202000_iobp(0xea002640); + break; + } + + pcie_update_cfg(dev, 0x338, ~(1 << 26), 0); + } + + /* Enable LTR in Root Port. Disable OBFF. */ + pcie_update_cfg(dev, 0x64, ~(1 << 11) & ~(3 << 18), (1 << 11)); + pcie_update_cfg(dev, 0x68, ~(1 << 10), (1 << 10)); + + pcie_update_cfg(dev, 0x318, ~(0xffff << 16), (0x1414 << 16)); + + /* Set L1 exit latency in LCAP register. */ + if (!do_aspm && (pci_read_config8(dev, 0xf5) & 0x1)) + pcie_update_cfg(dev, 0x4c, ~(0x7 << 15), (0x4 << 15)); + else + pcie_update_cfg(dev, 0x4c, ~(0x7 << 15), (0x2 << 15)); + + pcie_update_cfg(dev, 0x314, 0x0, 0x743a361b); + + /* Set Common Clock Exit Latency in MPC register. */ + pcie_update_cfg(dev, 0xd8, ~(0x7 << 15), (0x3 << 15)); + + pcie_update_cfg(dev, 0x33c, ~0x00ffffff, 0x854d74); + + /* Set Invalid Receive Range Check Enable in MPC register. */ + pcie_update_cfg(dev, 0xd8, ~0, (1 << 25)); + + pcie_update_cfg8(dev, 0xf5, 0x0f, 0); + + /* Set AER Extended Cap ID to 01h and Next Cap Pointer to 200h. */ + pcie_update_cfg(dev, 0x100, ~(1 << 29) & ~0xfffff, (1 << 29) | 0x10001); + + /* Set L1 Sub-State Cap ID to 1Eh and Next Cap Pointer to None. */ + pcie_update_cfg(dev, 0x200, ~0xffff, 0x001e); + + pcie_update_cfg(dev, 0x320, ~(3 << 20) & ~(7 << 6), + (1 << 20) | (3 << 6)); + /* Enable Relaxed Order from Root Port. */ + pcie_update_cfg(dev, 0x320, ~(3 << 23), (3 << 23)); + + if (rp == 1 || rp == 5 || rp == 6) + pcie_update_cfg8(dev, 0xf7, ~0xc, 0); + + /* Set EOI forwarding disable. */ + pcie_update_cfg(dev, 0xd4, ~0, (1 << 1)); + + /* Read and write back write-once capability registers. */ + pcie_update_cfg(dev, 0x34, ~0, 0); + pcie_update_cfg(dev, 0x40, ~0, 0); + pcie_update_cfg(dev, 0x80, ~0, 0); + pcie_update_cfg(dev, 0x90, ~0, 0); +} + +static void pch_pcie_init(struct device *dev) +{ + u16 reg16; + u32 reg32; + + printk(BIOS_DEBUG, "Initializing PCH PCIe bridge.\n"); + + /* Enable SERR */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_SERR; + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Enable Bus Master */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_MASTER; + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Set Cache Line Size to 0x10 */ + pci_write_config8(dev, 0x0c, 0x10); + + reg16 = pci_read_config16(dev, 0x3e); + reg16 &= ~(1 << 0); /* disable parity error response */ + reg16 |= (1 << 2); /* ISA enable */ + pci_write_config16(dev, 0x3e, reg16); + +#ifdef EVEN_MORE_DEBUG + reg32 = pci_read_config32(dev, 0x20); + printk(BIOS_SPEW, " MBL = 0x%08x\n", reg32); + reg32 = pci_read_config32(dev, 0x24); + printk(BIOS_SPEW, " PMBL = 0x%08x\n", reg32); + reg32 = pci_read_config32(dev, 0x28); + printk(BIOS_SPEW, " PMBU32 = 0x%08x\n", reg32); + reg32 = pci_read_config32(dev, 0x2c); + printk(BIOS_SPEW, " PMLU32 = 0x%08x\n", reg32); +#endif + + /* Clear errors in status registers */ + reg16 = pci_read_config16(dev, 0x06); + pci_write_config16(dev, 0x06, reg16); + reg16 = pci_read_config16(dev, 0x1e); + pci_write_config16(dev, 0x1e, reg16); +} + +static void pch_pcie_enable(device_t dev) +{ + /* Add this device to the root port config structure. */ + root_port_init_config(dev); + + /* Check to see if this Root Port should be disabled. */ + root_port_check_disable(dev); + + /* Power Management init before enumeration */ + if (dev->enabled) + pch_pcie_early(dev); + + /* + * When processing the last PCIe root port we can now + * update the Root Port Function Number and Hide register. + */ + if (root_port_is_last(dev)) + root_port_commit_config(); +} + +static void pcie_set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + /* NOTE: This is not the default position! */ + if (!vendor || !device) + pci_write_config32(dev, 0x94, pci_read_config32(dev, 0)); + else + pci_write_config32(dev, 0x94, (device << 16) | vendor); +} + +static void pcie_set_L1_ss_max_latency(device_t dev, unsigned int off) +{ + /* Set max snoop and non-snoop latency for Broadwell */ + pci_mmio_write_config32(dev, off, 0x10031003); +} + +static struct pci_operations pcie_ops = { + .set_subsystem = pcie_set_subsystem, + .set_L1_ss_latency = pcie_set_L1_ss_max_latency, +}; + +static struct device_operations device_ops = { + .read_resources = pci_bus_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_bus_enable_resources, + .init = pch_pcie_init, + .enable = pch_pcie_enable, + .scan_bus = pciexp_scan_bridge, + .ops_pci = &pcie_ops, +}; + +static const unsigned short pcie_device_ids[] = { + /* Lynxpoint-LP */ + 0x9c10, 0x9c12, 0x9c14, 0x9c16, 0x9c18, 0x9c1a, + /* WildcatPoint */ + 0x9c90, 0x9c92, 0x9c94, 0x9c96, 0x9c98, 0x9c9a, 0x2448, + 0 +}; + +static const struct pci_driver pch_pcie __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pcie_device_ids, +}; diff --git a/src/soc/intel/skylake/pei_data.c b/src/soc/intel/skylake/pei_data.c new file mode 100644 index 0000000..180f0ca --- /dev/null +++ b/src/soc/intel/skylake/pei_data.c @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdlib.h> +#include <stdint.h> +#include <console/streams.h> +#include <soc/iomap.h> +#include <soc/pei_data.h> +#include <soc/pei_wrapper.h> +#include <soc/smm.h> + +static void ABI_X86 send_to_console(unsigned char b) +{ + console_tx_byte(b); +} + +void broadwell_fill_pei_data(struct pei_data *pei_data) +{ + pei_data->pei_version = PEI_VERSION; + pei_data->board_type = BOARD_TYPE_ULT; + pei_data->usbdebug = CONFIG_USBDEBUG; + pei_data->pciexbar = MCFG_BASE_ADDRESS; + pei_data->smbusbar = SMBUS_BASE_ADDRESS; + pei_data->ehcibar = EARLY_EHCI_BAR; + pei_data->xhcibar = EARLY_XHCI_BAR; + pei_data->gttbar = EARLY_GTT_BAR; + pei_data->pmbase = ACPI_BASE_ADDRESS; + pei_data->gpiobase = GPIO_BASE_ADDRESS; + pei_data->tseg_size = smm_region_size(); + pei_data->temp_mmio_base = EARLY_TEMP_MMIO; + pei_data->tx_byte = &send_to_console; + pei_data->ddr_refresh_2x = 1; +} diff --git a/src/soc/intel/skylake/pmutil.c b/src/soc/intel/skylake/pmutil.c new file mode 100644 index 0000000..7686387 --- /dev/null +++ b/src/soc/intel/skylake/pmutil.c @@ -0,0 +1,452 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Helper functions for dealing with power management registers + * and the differences between PCH variants. + */ + +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_def.h> +#include <console/console.h> +#include <soc/iomap.h> +#include <soc/lpc.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> +#include <soc/gpio.h> + +/* Print status bits with descriptive names */ +static void print_status_bits(u32 status, const char *bit_names[]) +{ + int i; + + if (!status) + return; + + for (i=31; i>=0; i--) { + if (status & (1 << i)) { + if (bit_names[i]) + printk(BIOS_DEBUG, "%s ", bit_names[i]); + else + printk(BIOS_DEBUG, "BIT%d ", i); + } + } +} + +/* Print status bits as GPIO numbers */ +static void print_gpio_status(u32 status, int start) +{ + int i; + + if (!status) + return; + + for (i=31; i>=0; i--) { + if (status & (1 << i)) + printk(BIOS_DEBUG, "GPIO%d ", start + i); + } +} + + +/* + * PM1_CNT + */ + +/* Enable events in PM1 control register */ +void enable_pm1_control(u32 mask) +{ + u32 pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); + pm1_cnt |= mask; + outl(pm1_cnt, ACPI_BASE_ADDRESS + PM1_CNT); +} + +/* Disable events in PM1 control register */ +void disable_pm1_control(u32 mask) +{ + u32 pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); + pm1_cnt &= ~mask; + outl(pm1_cnt, ACPI_BASE_ADDRESS + PM1_CNT); +} + + +/* + * PM1 + */ + +/* Clear and return PM1 status register */ +static u16 reset_pm1_status(void) +{ + u16 pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS); + outw(pm1_sts, ACPI_BASE_ADDRESS + PM1_STS); + return pm1_sts; +} + +/* Print PM1 status bits */ +static u16 print_pm1_status(u16 pm1_sts) +{ + const char *pm1_sts_bits[] = { + [0] = "TMROF", + [4] = "BM", + [5] = "GBL", + [8] = "PWRBTN", + [10] = "RTC", + [11] = "PRBTNOR", + [14] = "PCIEXPWAK", + [15] = "WAK", + }; + + if (!pm1_sts) + return 0; + + printk(BIOS_SPEW, "PM1_STS: "); + print_status_bits(pm1_sts, pm1_sts_bits); + printk(BIOS_SPEW, "\n"); + + return pm1_sts; +} + +/* Print, clear, and return PM1 status */ +u16 clear_pm1_status(void) +{ + return print_pm1_status(reset_pm1_status()); +} + +/* Set the PM1 register to events */ +void enable_pm1(u16 events) +{ + outw(events, ACPI_BASE_ADDRESS + PM1_EN); +} + + +/* + * SMI + */ + +/* Clear and return SMI status register */ +static u32 reset_smi_status(void) +{ + u32 smi_sts = inl(ACPI_BASE_ADDRESS + SMI_STS); + outl(smi_sts, ACPI_BASE_ADDRESS + SMI_STS); + return smi_sts; +} + +/* Print SMI status bits */ +static u32 print_smi_status(u32 smi_sts) +{ + const char *smi_sts_bits[] = { + [2] = "BIOS", + [3] = "LEGACY_USB", + [4] = "SLP_SMI", + [5] = "APM", + [6] = "SWSMI_TMR", + [8] = "PM1", + [9] = "GPE0", + [10] = "GPI", + [11] = "MCSMI", + [12] = "DEVMON", + [13] = "TCO", + [14] = "PERIODIC", + [15] = "SERIRQ_SMI", + [16] = "SMBUS_SMI", + [17] = "LEGACY_USB2", + [18] = "INTEL_USB2", + [20] = "PCI_EXP_SMI", + [21] = "MONITOR", + [26] = "SPI", + [27] = "GPIO_UNLOCK" + }; + + if (!smi_sts) + return 0; + + printk(BIOS_DEBUG, "SMI_STS: "); + print_status_bits(smi_sts, smi_sts_bits); + printk(BIOS_DEBUG, "\n"); + + return smi_sts; +} + +/* Print, clear, and return SMI status */ +u32 clear_smi_status(void) +{ + return print_smi_status(reset_smi_status()); +} + +/* Enable SMI event */ +void enable_smi(u32 mask) +{ + u32 smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN); + smi_en |= mask; + outl(smi_en, ACPI_BASE_ADDRESS + SMI_EN); +} + +/* Disable SMI event */ +void disable_smi(u32 mask) +{ + u32 smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN); + smi_en &= ~mask; + outl(smi_en, ACPI_BASE_ADDRESS + SMI_EN); +} + + +/* + * ALT_GP_SMI + */ + +/* Clear GPIO SMI status and return events that are enabled and active */ +static u32 reset_alt_smi_status(void) +{ + u32 alt_sts, alt_en; + + /* Low Power variant moves this to GPIO region as dword */ + alt_sts = inl(GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_STS); + outl(alt_sts, GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_STS); + alt_en = inl(GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_EN); + + /* Only report enabled events */ + return alt_sts & alt_en; +} + +/* Print GPIO SMI status bits */ +static u32 print_alt_smi_status(u32 alt_sts) +{ + if (!alt_sts) + return 0; + + printk(BIOS_DEBUG, "ALT_STS: "); + + /* First 16 events are GPIO 32-47 */ + print_gpio_status(alt_sts & 0xffff, 32); + + printk(BIOS_DEBUG, "\n"); + + return alt_sts; +} + +/* Print, clear, and return GPIO SMI status */ +u32 clear_alt_smi_status(void) +{ + return print_alt_smi_status(reset_alt_smi_status()); +} + +/* Enable GPIO SMI events */ +void enable_alt_smi(u32 mask) +{ + u32 alt_en; + + alt_en = inl(GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_EN); + alt_en |= mask; + outl(alt_en, GPIO_BASE_ADDRESS + GPIO_ALT_GPI_SMI_EN); +} + + +/* + * TCO + */ + +/* Clear TCO status and return events that are enabled and active */ +static u32 reset_tco_status(void) +{ + u32 tcobase = ACPI_BASE_ADDRESS + 0x60; + u32 tco_sts = inl(tcobase + 0x04); + u32 tco_en = inl(ACPI_BASE_ADDRESS + 0x68); + + /* Don't clear BOOT_STS before SECOND_TO_STS */ + outl(tco_sts & ~(1 << 18), tcobase + 0x04); + + /* Clear BOOT_STS */ + if (tco_sts & (1 << 18)) + outl(tco_sts & (1 << 18), tcobase + 0x04); + + return tco_sts & tco_en; +} + +/* Print TCO status bits */ +static u32 print_tco_status(u32 tco_sts) +{ + const char *tco_sts_bits[] = { + [0] = "NMI2SMI", + [1] = "SW_TCO", + [2] = "TCO_INT", + [3] = "TIMEOUT", + [7] = "NEWCENTURY", + [8] = "BIOSWR", + [9] = "DMISCI", + [10] = "DMISMI", + [12] = "DMISERR", + [13] = "SLVSEL", + [16] = "INTRD_DET", + [17] = "SECOND_TO", + [18] = "BOOT", + [20] = "SMLINK_SLV" + }; + + if (!tco_sts) + return 0; + + printk(BIOS_DEBUG, "TCO_STS: "); + print_status_bits(tco_sts, tco_sts_bits); + printk(BIOS_DEBUG, "\n"); + + return tco_sts; +} + +/* Print, clear, and return TCO status */ +u32 clear_tco_status(void) +{ + return print_tco_status(reset_tco_status()); +} + +/* Enable TCO SCI */ +void enable_tco_sci(void) +{ + /* Clear pending events */ + outl(ACPI_BASE_ADDRESS + GPE0_STS(3), TCOSCI_STS); + + /* Enable TCO SCI events */ + enable_gpe(TCOSCI_EN); +} + + +/* + * GPE0 + */ + +/* Clear a GPE0 status and return events that are enabled and active */ +static u32 reset_gpe(u16 sts_reg, u16 en_reg) +{ + u32 gpe0_sts = inl(ACPI_BASE_ADDRESS + sts_reg); + u32 gpe0_en = inl(ACPI_BASE_ADDRESS + en_reg); + + outl(gpe0_sts, ACPI_BASE_ADDRESS + sts_reg); + + /* Only report enabled events */ + return gpe0_sts & gpe0_en; +} + +/* Print GPE0 status bits */ +static u32 print_gpe_status(u32 gpe0_sts, const char *bit_names[]) +{ + if (!gpe0_sts) + return 0; + + printk(BIOS_DEBUG, "GPE0_STS: "); + print_status_bits(gpe0_sts, bit_names); + printk(BIOS_DEBUG, "\n"); + + return gpe0_sts; +} + +/* Print GPE0 GPIO status bits */ +static u32 print_gpe_gpio(u32 gpe0_sts, int start) +{ + if (!gpe0_sts) + return 0; + + printk(BIOS_DEBUG, "GPE0_STS: "); + print_gpio_status(gpe0_sts, start); + printk(BIOS_DEBUG, "\n"); + + return gpe0_sts; +} + +/* Clear all GPE status and return "standard" GPE event status */ +u32 clear_gpe_status(void) +{ + const char *gpe0_sts_3_bits[] = { + [1] = "HOTPLUG", + [2] = "SWGPE", + [6] = "TCO_SCI", + [7] = "SMB_WAK", + [9] = "PCI_EXP", + [10] = "BATLOW", + [11] = "PME", + [12] = "ME", + [13] = "PME_B0", + [16] = "GPIO27", + [18] = "WADT" + }; + + print_gpe_gpio(reset_gpe(GPE0_STS(GPE_31_0), GPE0_EN(GPE_31_0)), 0); + print_gpe_gpio(reset_gpe(GPE0_STS(GPE_63_32), GPE0_EN(GPE_63_32)), 32); + print_gpe_gpio(reset_gpe(GPE0_STS(GPE_94_64), GPE0_EN(GPE_94_64)), 64); + return print_gpe_status(reset_gpe(GPE0_STS(GPE_STD), GPE0_EN(GPE_STD)), + gpe0_sts_3_bits); +} + +/* Enable all requested GPE */ +void enable_all_gpe(u32 set1, u32 set2, u32 set3, u32 set4) +{ + outl(set1, ACPI_BASE_ADDRESS + GPE0_EN(GPE_31_0)); + outl(set2, ACPI_BASE_ADDRESS + GPE0_EN(GPE_63_32)); + outl(set3, ACPI_BASE_ADDRESS + GPE0_EN(GPE_94_64)); + outl(set4, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); +} + +/* Disable all GPE */ +void disable_all_gpe(void) +{ + enable_all_gpe(0, 0, 0, 0); +} + +/* Enable a standard GPE */ +void enable_gpe(u32 mask) +{ + u32 gpe0_en = inl(ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); + gpe0_en |= mask; + outl(gpe0_en, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); +} + +/* Disable a standard GPE */ +void disable_gpe(u32 mask) +{ + u32 gpe0_en = inl(ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); + gpe0_en &= ~mask; + outl(gpe0_en, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); +} + +int acpi_sci_irq(void) +{ + int scis = pci_read_config32(PCH_DEV_LPC, ACPI_CNTL) & SCI_IRQ_SEL; + int sci_irq = 9; + + /* Determine how SCI is routed. */ + switch (scis) { + case SCIS_IRQ9: + case SCIS_IRQ10: + case SCIS_IRQ11: + sci_irq = scis - SCIS_IRQ9 + 9; + break; + case SCIS_IRQ20: + case SCIS_IRQ21: + case SCIS_IRQ22: + case SCIS_IRQ23: + sci_irq = scis - SCIS_IRQ20 + 20; + break; + default: + printk(BIOS_DEBUG, "Invalid SCI route! Defaulting to IRQ9.\n"); + sci_irq = 9; + break; + } + + printk(BIOS_DEBUG, "SCI is IRQ%d\n", sci_irq); + return sci_irq; +} diff --git a/src/soc/intel/skylake/ramstage.c b/src/soc/intel/skylake/ramstage.c new file mode 100644 index 0000000..eaa28d0 --- /dev/null +++ b/src/soc/intel/skylake/ramstage.c @@ -0,0 +1,100 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/acpi.h> +#include <cbmem.h> +#include <console/console.h> +#include <device/device.h> +#include <stdlib.h> +#include <string.h> +#include <soc/nvs.h> +#include <soc/pm.h> +#include <soc/ramstage.h> +#include <soc/intel/broadwell/chip.h> + +/* Save bit index for PM1_STS and GPE_STS for ACPI _SWS */ +static void save_acpi_wake_source(global_nvs_t *gnvs) +{ + struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE); + uint16_t pm1; + int gpe_reg; + + if (!ps) + return; + + pm1 = ps->pm1_sts & ps->pm1_en; + + /* Scan for first set bit in PM1 */ + for (gnvs->pm1i = 0; gnvs->pm1i < 16; gnvs->pm1i++) { + if (pm1 & 1) + break; + pm1 >>= 1; + } + + /* If unable to determine then return -1 */ + if (gnvs->pm1i >= 16) + gnvs->pm1i = -1; + + /* Scan for first set bit in GPE registers */ + gnvs->gpei = -1; + for (gpe_reg = 0; gpe_reg < GPE0_REG_MAX; gpe_reg++) { + u32 gpe = ps->gpe0_sts[gpe_reg] & ps->gpe0_en[gpe_reg]; + int start = gpe_reg * GPE0_REG_SIZE; + int end = start + GPE0_REG_SIZE; + + if (gpe == 0) { + if (!gnvs->gpei) + gnvs->gpei = end; + continue; + } + + for (gnvs->gpei = start; gnvs->gpei < end; gnvs->gpei++) { + if (gpe & 1) + break; + gpe >>= 1; + } + } + + /* If unable to determine then return -1 */ + if (gnvs->gpei >= (GPE0_REG_MAX * GPE0_REG_SIZE)) + gnvs->gpei = -1; + + printk(BIOS_DEBUG, "ACPI _SWS is PM1 Index %lld GPE Index %lld\n", + gnvs->pm1i, gnvs->gpei); +} + +static void s3_resume_prepare(void) +{ + global_nvs_t *gnvs; + + gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof(global_nvs_t)); + if (gnvs == NULL) + return; + + if (!acpi_is_wakeup_s3()) + memset(gnvs, 0, sizeof(global_nvs_t)); + else + save_acpi_wake_source(gnvs); +} + +void broadwell_init_pre_device(void *chip_info) +{ + s3_resume_prepare(); + broadwell_run_reference_code(); +} diff --git a/src/soc/intel/skylake/refcode.c b/src/soc/intel/skylake/refcode.c new file mode 100644 index 0000000..201825a --- /dev/null +++ b/src/soc/intel/skylake/refcode.c @@ -0,0 +1,146 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <arch/acpi.h> +#include <cbmem.h> +#include <console/console.h> +#include <console/streams.h> +#include <cpu/x86/tsc.h> +#include <program_loading.h> +#include <rmodule.h> +#include <stage_cache.h> +#include <string.h> +#if IS_ENABLED(CONFIG_CHROMEOS) +#include <vendorcode/google/chromeos/vboot_handoff.h> +#endif +#include <soc/pei_data.h> +#include <soc/pei_wrapper.h> +#include <soc/ramstage.h> + +static pei_wrapper_entry_t load_refcode_from_cache(void) +{ + struct prog refcode; + + printk(BIOS_DEBUG, "refcode loading from cache.\n"); + + stage_cache_load_stage(STAGE_REFCODE, &refcode); + + return (pei_wrapper_entry_t)prog_entry(&refcode); +} + +static void cache_refcode(const struct rmod_stage_load *rsl) +{ + stage_cache_add(STAGE_REFCODE, rsl->prog); +} + +#if IS_ENABLED(CONFIG_CHROMEOS) +static int load_refcode_from_vboot(struct rmod_stage_load *refcode) +{ + struct vboot_handoff *vboot_handoff; + const struct firmware_component *fwc; + struct cbfs_stage *stage; + + vboot_handoff = cbmem_find(CBMEM_ID_VBOOT_HANDOFF); + fwc = &vboot_handoff->components[CONFIG_VBOOT_REFCODE_INDEX]; + + if (vboot_handoff == NULL || + vboot_handoff->selected_firmware == VB_SELECT_FIRMWARE_READONLY || + CONFIG_VBOOT_REFCODE_INDEX >= MAX_PARSED_FW_COMPONENTS || + fwc->size == 0 || fwc->address == 0) + return -1; + + printk(BIOS_DEBUG, "refcode loading from vboot rw area.\n"); + stage = (void *)(uintptr_t)fwc->address; + + if (rmodule_stage_load(refcode, stage)) { + printk(BIOS_DEBUG, "Error loading reference code.\n"); + return -1; + } + return 0; +} +#else +static int load_refcode_from_vboot(struct rmod_stage_load *refcode) +{ + return -1; +} +#endif + +static int load_refcode_from_cbfs(struct rmod_stage_load *refcode) +{ + printk(BIOS_DEBUG, "refcode loading from cbfs.\n"); + + if (rmodule_stage_load_from_cbfs(refcode)) { + printk(BIOS_DEBUG, "Error loading reference code.\n"); + return -1; + } + + return 0; +} + +static pei_wrapper_entry_t load_reference_code(void) +{ + struct prog prog = { + .name = CONFIG_CBFS_PREFIX "/refcode", + }; + struct rmod_stage_load refcode = { + .cbmem_id = CBMEM_ID_REFCODE, + .prog = &prog, + }; + + if (acpi_is_wakeup_s3()) { + return load_refcode_from_cache(); + } + + if (load_refcode_from_vboot(&refcode) || + load_refcode_from_cbfs(&refcode)) + return NULL; + + /* Cache loaded reference code. */ + cache_refcode(&refcode); + + return prog_entry(&prog); +} + +void broadwell_run_reference_code(void) +{ + int ret, dummy; + struct pei_data pei_data; + pei_wrapper_entry_t entry; + + memset(&pei_data, 0, sizeof(pei_data)); + mainboard_fill_pei_data(&pei_data); + broadwell_fill_pei_data(&pei_data); + + pei_data.boot_mode = acpi_slp_type; + pei_data.saved_data = (void *) &dummy; + + entry = load_reference_code(); + if (entry == NULL) { + printk(BIOS_ERR, "Reference code not found\n"); + return; + } + + /* Call into reference code. */ + ret = entry(&pei_data); + if (ret != 0) { + printk(BIOS_ERR, "Reference code returned %d\n", ret); + return; + } +} diff --git a/src/soc/intel/skylake/reset.c b/src/soc/intel/skylake/reset.c new file mode 100644 index 0000000..a56ec24 --- /dev/null +++ b/src/soc/intel/skylake/reset.c @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <halt.h> +#include <reset.h> +#include <soc/reset.h> + +/* + * Soft reset (INIT# to cpu) - write 0x1 to I/O 0x92 + * Soft reset (INIT# to cpu)- write 0x4 to I/0 0xcf9 + * Cold reset (S0->S5->S0) - write 0xe to I/0 0xcf9 + * Warm reset (PLTRST# assertion) - write 0x6 to I/O 0xcf9 + * Global reset (S0->S5->S0 with ME reset) - write 0x6 or 0xe to 0xcf9 but + * with ETR[20] set. + */ + +void soft_reset(void) +{ + outb(0x04, 0xcf9); +} + +void hard_reset(void) +{ + outb(0x06, 0xcf9); +} + +void reset_system(void) +{ + hard_reset(); + halt(); +} diff --git a/src/soc/intel/skylake/romstage/Makefile.inc b/src/soc/intel/skylake/romstage/Makefile.inc new file mode 100644 index 0000000..ae0f980 --- /dev/null +++ b/src/soc/intel/skylake/romstage/Makefile.inc @@ -0,0 +1,13 @@ +cpu_incs += $(src)/soc/intel/broadwell/romstage/cache_as_ram.inc + +romstage-y += cpu.c +romstage-y += pch.c +romstage-y += power_state.c +romstage-y += raminit.c +romstage-y += report_platform.c +romstage-y += romstage.c +romstage-y += smbus.c +romstage-y += spi.c +romstage-y += stack.c +romstage-y += systemagent.c +romstage-$(CONFIG_DRIVERS_UART_8250MEM) += uart.c diff --git a/src/soc/intel/skylake/romstage/cache_as_ram.inc b/src/soc/intel/skylake/romstage/cache_as_ram.inc new file mode 100644 index 0000000..a10ca4c --- /dev/null +++ b/src/soc/intel/skylake/romstage/cache_as_ram.inc @@ -0,0 +1,341 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich(a)gmail.com> + * Copyright (C) 2007-2008 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <cpu/x86/mtrr.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/post_code.h> +#include <cbmem.h> + +/* The full cache-as-ram size includes the cache-as-ram portion from coreboot + * and the space used by the reference code. These 2 values combined should + * be a power of 2 because the MTRR setup assumes that. */ +#define CACHE_AS_RAM_SIZE \ + (CONFIG_DCACHE_RAM_SIZE + CONFIG_DCACHE_RAM_MRC_VAR_SIZE) +#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE +#define CACHE_AS_RAM_LIMIT (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE) +#define USBDEBUG_VAR_SIZE 36 /* sizeof(struct ehci_debug_info) */ + +/* Cache 4GB - MRC_SIZE_KB for MRC */ +#define CACHE_MRC_BYTES ((CONFIG_CACHE_MRC_SIZE_KB << 10) - 1) +#define CACHE_MRC_BASE (0xFFFFFFFF - CACHE_MRC_BYTES) +#define CACHE_MRC_MASK (~CACHE_MRC_BYTES) + +#define CPU_MAXPHYSADDR CONFIG_CPU_ADDR_BITS +#define CPU_PHYSMASK_HI (1 << (CPU_MAXPHYSADDR - 32) - 1) + +#define NoEvictMod_MSR 0x2e0 + + /* Save the BIST result. */ + movl %eax, %ebp + +cache_as_ram: + post_code(0x20) + + /* Send INIT IPI to all excluding ourself. */ + movl $0x000C4500, %eax + movl $0xFEE00300, %esi + movl %eax, (%esi) + + /* All CPUs need to be in Wait for SIPI state */ +wait_for_sipi: + movl (%esi), %eax + bt $12, %eax + jc wait_for_sipi + + post_code(0x21) + /* Zero out all fixed range and variable range MTRRs. */ + movl $mtrr_table, %esi + movl $((mtrr_table_end - mtrr_table) / 2), %edi + xorl %eax, %eax + xorl %edx, %edx +clear_mtrrs: + movw (%esi), %bx + movzx %bx, %ecx + wrmsr + add $2, %esi + dec %edi + jnz clear_mtrrs + + post_code(0x22) + /* Configure the default memory type to uncacheable. */ + movl $MTRRdefType_MSR, %ecx + rdmsr + andl $(~0x00000cff), %eax + wrmsr + + post_code(0x23) + /* Set Cache-as-RAM base address. */ + movl $(MTRRphysBase_MSR(0)), %ecx + movl $(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax + xorl %edx, %edx + wrmsr + + post_code(0x24) + /* Set Cache-as-RAM mask. */ + movl $(MTRRphysMask_MSR(0)), %ecx + movl $(~(CACHE_AS_RAM_SIZE - 1) | MTRRphysMaskValid), %eax + movl $CPU_PHYSMASK_HI, %edx + wrmsr + + post_code(0x25) + + /* Enable MTRR. */ + movl $MTRRdefType_MSR, %ecx + rdmsr + orl $MTRRdefTypeEn, %eax + wrmsr + + /* Enable cache (CR0.CD = 0, CR0.NW = 0). */ + movl %cr0, %eax + andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax + invd + movl %eax, %cr0 + + /* enable the 'no eviction' mode */ + movl $NoEvictMod_MSR, %ecx + rdmsr + orl $1, %eax + andl $~2, %eax + wrmsr + + /* Clear the cache memory region. This will also fill up the cache */ + movl $CACHE_AS_RAM_BASE, %esi + movl %esi, %edi + movl $(CACHE_AS_RAM_SIZE / 4), %ecx + xorl %eax, %eax + rep stosl + + /* enable the 'no eviction run' state */ + movl $NoEvictMod_MSR, %ecx + rdmsr + orl $3, %eax + wrmsr + + post_code(0x26) + /* Enable Cache-as-RAM mode by disabling cache. */ + movl %cr0, %eax + orl $CR0_CacheDisable, %eax + movl %eax, %cr0 + + /* Enable cache for our code in Flash because we do XIP here */ + movl $MTRRphysBase_MSR(1), %ecx + xorl %edx, %edx + /* + * IMPORTANT: The following calculation _must_ be done at runtime. See + * http://www.coreboot.org/pipermail/coreboot/2010-October/060855.html + */ + movl $copy_and_run, %eax + andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax + orl $MTRR_TYPE_WRPROT, %eax + wrmsr + + movl $MTRRphysMask_MSR(1), %ecx + movl $CPU_PHYSMASK_HI, %edx + movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRRphysMaskValid), %eax + wrmsr + + post_code(0x27) +#if CONFIG_CACHE_MRC_BIN + /* Enable caching for ram init code to run faster */ + movl $MTRRphysBase_MSR(2), %ecx + movl $(CACHE_MRC_BASE | MTRR_TYPE_WRPROT), %eax + xorl %edx, %edx + wrmsr + movl $MTRRphysMask_MSR(2), %ecx + movl $(CACHE_MRC_MASK | MTRRphysMaskValid), %eax + movl $CPU_PHYSMASK_HI, %edx + wrmsr +#endif + + post_code(0x28) + /* Enable cache. */ + movl %cr0, %eax + andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax + movl %eax, %cr0 + + /* Setup the stack. */ + movl $(CACHE_AS_RAM_LIMIT), %eax +#if CONFIG_USBDEBUG + sub $(USBDEBUG_VAR_SIZE), %eax +#endif + movl %eax, %esp + + /* Restore the BIST result. */ + movl %ebp, %eax + + /* Build the call frame. */ + movl %esp, %ebp + movd %mm1, %ebx + pushl %ebx + movd %mm0, %ebx + pushl %ebx + pushl %eax + +before_romstage: + post_code(0x29) + /* Call romstage.c main function. */ + call romstage_main + /* Save return value from romstage_main. It contains the stack to use + * after cache-as-ram is torn down. It also contains the information + * for setting up MTRRs. */ + movl %eax, %ebx + + post_code(0x2f) + + /* Copy global variable space (for USBDEBUG) to memory */ +#if CONFIG_USBDEBUG + cld + movl $(CACHE_AS_RAM_LIMIT - USBDEBUG_VAR_SIZE), %esi + movl $(CONFIG_RAMTOP - USBDEBUG_VAR_SIZE), %edi + movl $USBDEBUG_VAR_SIZE, %ecx + rep movsb +#endif + + post_code(0x30) + + /* Disable cache. */ + movl %cr0, %eax + orl $CR0_CacheDisable, %eax + movl %eax, %cr0 + + post_code(0x31) + + /* Disable MTRR. */ + movl $MTRRdefType_MSR, %ecx + rdmsr + andl $(~MTRRdefTypeEn), %eax + wrmsr + + post_code(0x31) + + /* Disable the no eviction run state */ + movl $NoEvictMod_MSR, %ecx + rdmsr + andl $~2, %eax + wrmsr + + invd + + /* Disable the no eviction mode */ + rdmsr + andl $~1, %eax + wrmsr + +#if CONFIG_CACHE_MRC_BIN + /* Clear MTRR that was used to cache MRC */ + xorl %eax, %eax + xorl %edx, %edx + movl $MTRRphysBase_MSR(2), %ecx + wrmsr + movl $MTRRphysMask_MSR(2), %ecx + wrmsr +#endif + + post_code(0x33) + + /* Enable cache. */ + movl %cr0, %eax + andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax + movl %eax, %cr0 + + post_code(0x36) + + /* Disable cache. */ + movl %cr0, %eax + orl $CR0_CacheDisable, %eax + movl %eax, %cr0 + + post_code(0x38) + + /* Setup stack as indicated by return value from ramstage_main(). */ + movl %ebx, %esp + + /* Get number of MTRRs. */ + popl %ebx + movl $MTRRphysBase_MSR(0), %ecx +1: + testl %ebx, %ebx + jz 1f + + /* Low 32 bits of MTRR base. */ + popl %eax + /* Upper 32 bits of MTRR base. */ + popl %edx + /* Write MTRR base. */ + wrmsr + inc %ecx + /* Low 32 bits of MTRR mask. */ + popl %eax + /* Upper 32 bits of MTRR mask. */ + popl %edx + /* Write MTRR mask. */ + wrmsr + inc %ecx + + dec %ebx + jmp 1b +1: + post_code(0x39) + + /* And enable cache again after setting MTRRs. */ + movl %cr0, %eax + andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax + movl %eax, %cr0 + + post_code(0x3a) + + /* Enable MTRR. */ + movl $MTRRdefType_MSR, %ecx + rdmsr + orl $MTRRdefTypeEn, %eax + wrmsr + + post_code(0x3b) + + /* Invalidate the cache again. */ + invd + + post_code(0x3c) + +__main: + post_code(POST_PREPARE_RAMSTAGE) + cld /* Clear direction flag. */ + call romstage_after_car + +.Lhlt: + post_code(POST_DEAD_CODE) + hlt + jmp .Lhlt + +mtrr_table: + /* Fixed MTRRs */ + .word 0x250, 0x258, 0x259 + .word 0x268, 0x269, 0x26A + .word 0x26B, 0x26C, 0x26D + .word 0x26E, 0x26F + /* Variable MTRRs */ + .word 0x200, 0x201, 0x202, 0x203 + .word 0x204, 0x205, 0x206, 0x207 + .word 0x208, 0x209, 0x20A, 0x20B + .word 0x20C, 0x20D, 0x20E, 0x20F + .word 0x210, 0x211, 0x212, 0x213 +mtrr_table_end: + diff --git a/src/soc/intel/skylake/romstage/cpu.c b/src/soc/intel/skylake/romstage/cpu.c new file mode 100644 index 0000000..af175be --- /dev/null +++ b/src/soc/intel/skylake/romstage/cpu.c @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/cpu.h> +#include <stdlib.h> +#include <console/console.h> +#include <cpu/x86/msr.h> +#include <soc/cpu.h> +#include <soc/msr.h> +#include <soc/romstage.h> + +u32 cpu_family_model(void) +{ + return cpuid_eax(1) & 0x0fff0ff0; +} + +void set_max_freq(void) +{ + msr_t msr, perf_ctl, platform_info; + + /* Check for configurable TDP option */ + platform_info = rdmsr(MSR_PLATFORM_INFO); + + if ((platform_info.hi >> 1) & 3) { + /* Set to nominal TDP ratio */ + msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); + perf_ctl.lo = (msr.lo & 0xff) << 8; + } else { + /* Platform Info bits 15:8 give max ratio */ + msr = rdmsr(MSR_PLATFORM_INFO); + perf_ctl.lo = msr.lo & 0xff00; + } + + perf_ctl.hi = 0; + wrmsr(IA32_PERF_CTL, perf_ctl); + + printk(BIOS_DEBUG, "CPU: frequency set to %d MHz\n", + ((perf_ctl.lo >> 8) & 0xff) * CPU_BCLK); +} diff --git a/src/soc/intel/skylake/romstage/pch.c b/src/soc/intel/skylake/romstage/pch.c new file mode 100644 index 0000000..6fa6c39 --- /dev/null +++ b/src/soc/intel/skylake/romstage/pch.c @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <reg_script.h> +#include <soc/iomap.h> +#include <soc/lpc.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> +#include <soc/rcba.h> +#include <soc/romstage.h> +#include <soc/smbus.h> +#include <soc/intel/broadwell/chip.h> + +const struct reg_script pch_early_init_script[] = { + /* Setup southbridge BARs */ + REG_PCI_WRITE32(RCBA, RCBA_BASE_ADDRESS | 1), + REG_PCI_WRITE32(PMBASE, ACPI_BASE_ADDRESS | 1), + REG_PCI_WRITE8(ACPI_CNTL, ACPI_EN), + REG_PCI_WRITE32(GPIO_BASE, GPIO_BASE_ADDRESS | 1), + REG_PCI_WRITE8(GPIO_CNTL, GPIO_EN), + + /* Set COM1/COM2 decode range */ + REG_PCI_WRITE16(LPC_IO_DEC, 0x0010), + /* Enable legacy decode ranges */ + REG_PCI_WRITE16(LPC_EN, CNF1_LPC_EN | CNF2_LPC_EN | GAMEL_LPC_EN | + COMA_LPC_EN | KBC_LPC_EN | MC_LPC_EN), + + /* Enable IOAPIC */ + REG_MMIO_WRITE16(RCBA_BASE_ADDRESS + OIC, 0x0100), + /* Read back for posted write */ + REG_MMIO_READ16(RCBA_BASE_ADDRESS + OIC), + + /* Set HPET address and enable it */ + REG_MMIO_RMW32(RCBA_BASE_ADDRESS + HPTC, ~3, (1 << 7)), + /* Read back for posted write */ + REG_MMIO_READ32(RCBA_BASE_ADDRESS + HPTC), + /* Enable HPET to start counter */ + REG_MMIO_OR32(HPET_BASE_ADDRESS + 0x10, (1 << 0)), + + /* Disable reset */ + REG_MMIO_OR32(RCBA_BASE_ADDRESS + GCS, (1 << 5)), + /* TCO timer halt */ + REG_IO_OR16(ACPI_BASE_ADDRESS + TCO1_CNT, TCO_TMR_HLT), + + /* Enable upper 128 bytes of CMOS */ + REG_MMIO_OR32(RCBA_BASE_ADDRESS + RC, (1 << 2)), + + /* Disable unused device (always) */ + REG_MMIO_OR32(RCBA_BASE_ADDRESS + FD, PCH_DISABLE_ALWAYS), + + REG_SCRIPT_END +}; + +const struct reg_script pch_interrupt_init_script[] = { + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP PCIE INTA -> PIRQA + * D29IP_E1P EHCI INTA -> PIRQD + * D20IP_XHCI XHCI INTA -> PIRQC (MSI) + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + */ + + /* Device interrupt pin register (board specific) */ + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D31IP, + (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D29IP, (INTA << D29IP_E1P)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D28IP, + (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D27IP, (INTA << D27IP_ZIP)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D26IP, (INTA << D26IP_E2P)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D22IP, (NOINT << D22IP_MEI1IP)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D20IP, (INTA << D20IP_XHCI)), + + /* Device interrupt route registers */ + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D31IR, /* LPC */ + DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D29IR, /* EHCI */ + DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D28IR, /* PCIE */ + DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D27IR, /* HDA */ + DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D22IR, /* ME */ + DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D21IR, /* SIO */ + DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D20IR, /* XHCI */ + DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)), + REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + D23IR, /* SDIO */ + DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)), + + REG_SCRIPT_END +}; + +static void pch_enable_lpc(void) +{ + /* Lookup device tree in romstage */ + const struct device *dev; + const config_t *config; + + dev = dev_find_slot(0, PCI_DEVFN(PCH_DEV_SLOT_LPC, 0)); + if (!dev || !dev->chip_info) + return; + config = dev->chip_info; + + pci_write_config32(PCH_DEV_LPC, LPC_GEN1_DEC, config->gen1_dec); + pci_write_config32(PCH_DEV_LPC, LPC_GEN2_DEC, config->gen2_dec); + pci_write_config32(PCH_DEV_LPC, LPC_GEN3_DEC, config->gen3_dec); + pci_write_config32(PCH_DEV_LPC, LPC_GEN4_DEC, config->gen4_dec); +} + +static void pcie_update_cfg(device_t dev, int reg, u32 mask, u32 or) +{ + u32 reg32; + + reg32 = pci_read_config32(dev, reg); + reg32 &= mask; + reg32 |= or; + pci_write_config32(dev, reg, reg32); +} + +void pch_early_init(void) +{ + reg_script_run_on_dev(PCH_DEV_LPC, pch_early_init_script); + reg_script_run_on_dev(PCH_DEV_LPC, pch_interrupt_init_script); + + pch_enable_lpc(); + + enable_smbus(); + + /* 8.14 Additional PCI Express Programming Steps, step #1 */ + pcie_update_cfg(_PCH_DEV(PCIE, 0), 0xf4, ~0x60, 0); + pcie_update_cfg(_PCH_DEV(PCIE, 0), 0xf4, ~0x80, 0x80); + pcie_update_cfg(_PCH_DEV(PCIE, 0), 0xe2, ~0x30, 0x30); +} diff --git a/src/soc/intel/skylake/romstage/power_state.c b/src/soc/intel/skylake/romstage/power_state.c new file mode 100644 index 0000000..bdb3da9 --- /dev/null +++ b/src/soc/intel/skylake/romstage/power_state.c @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/early_variables.h> +#include <arch/io.h> +#include <cbmem.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_def.h> +#include <reg_script.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <soc/iomap.h> +#include <soc/lpc.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> +#include <soc/romstage.h> + +static struct chipset_power_state power_state CAR_GLOBAL; + +static void migrate_power_state(void) +{ + struct chipset_power_state *ps_cbmem; + struct chipset_power_state *ps_car; + + ps_car = car_get_var_ptr(&power_state); + ps_cbmem = cbmem_add(CBMEM_ID_POWER_STATE, sizeof(*ps_cbmem)); + + if (ps_cbmem == NULL) { + printk(BIOS_DEBUG, "Not adding power state to cbmem!\n"); + return; + } + memcpy(ps_cbmem, ps_car, sizeof(*ps_cbmem)); +} +CAR_MIGRATE(migrate_power_state); + +/* Return 0, 3, or 5 to indicate the previous sleep state. */ +static int prev_sleep_state(struct chipset_power_state *ps) +{ + /* Default to S0. */ + int prev_sleep_state = SLEEP_STATE_S0; + + if (ps->pm1_sts & WAK_STS) { + switch ((ps->pm1_cnt & SLP_TYP) >> SLP_TYP_SHIFT) { +#if CONFIG_HAVE_ACPI_RESUME + case SLP_TYP_S3: + prev_sleep_state = SLEEP_STATE_S3; + break; +#endif + case SLP_TYP_S5: + prev_sleep_state = SLEEP_STATE_S5; + break; + } + /* Clear SLP_TYP. */ + outl(ps->pm1_cnt & ~(SLP_TYP), ACPI_BASE_ADDRESS + PM1_CNT); + } + + if (ps->gen_pmcon3 & (PWR_FLR | SUS_PWR_FLR)) + prev_sleep_state = SLEEP_STATE_S5; + + return prev_sleep_state; +} + +static void dump_power_state(struct chipset_power_state *ps) +{ + printk(BIOS_DEBUG, "PM1_STS: %04x\n", ps->pm1_sts); + printk(BIOS_DEBUG, "PM1_EN: %04x\n", ps->pm1_en); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", ps->pm1_cnt); + printk(BIOS_DEBUG, "TCO_STS: %04x %04x\n", + ps->tco1_sts, ps->tco2_sts); + + printk(BIOS_DEBUG, "GPE0_STS: %08x %08x %08x %08x\n", + ps->gpe0_sts[0], ps->gpe0_sts[1], + ps->gpe0_sts[2], ps->gpe0_sts[3]); + printk(BIOS_DEBUG, "GPE0_EN: %08x %08x %08x %08x\n", + ps->gpe0_en[0], ps->gpe0_en[1], + ps->gpe0_en[2], ps->gpe0_en[3]); + + printk(BIOS_DEBUG, "GEN_PMCON: %04x %04x %04x\n", + ps->gen_pmcon1, ps->gen_pmcon2, ps->gen_pmcon3); + + printk(BIOS_DEBUG, "Previous Sleep State: S%d\n", + ps->prev_sleep_state); +} + +/* Fill power state structure from ACPI PM registers */ +struct chipset_power_state *fill_power_state(void) +{ + struct chipset_power_state *ps = car_get_var_ptr(&power_state); + + ps->pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS); + ps->pm1_en = inw(ACPI_BASE_ADDRESS + PM1_EN); + ps->pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); + ps->tco1_sts = inw(ACPI_BASE_ADDRESS + TCO1_STS); + ps->tco2_sts = inw(ACPI_BASE_ADDRESS + TCO2_STS); + ps->gpe0_sts[0] = inl(ACPI_BASE_ADDRESS + GPE0_STS(0)); + ps->gpe0_sts[1] = inl(ACPI_BASE_ADDRESS + GPE0_STS(1)); + ps->gpe0_sts[2] = inl(ACPI_BASE_ADDRESS + GPE0_STS(2)); + ps->gpe0_sts[3] = inl(ACPI_BASE_ADDRESS + GPE0_STS(3)); + ps->gpe0_en[0] = inl(ACPI_BASE_ADDRESS + GPE0_EN(0)); + ps->gpe0_en[1] = inl(ACPI_BASE_ADDRESS + GPE0_EN(1)); + ps->gpe0_en[2] = inl(ACPI_BASE_ADDRESS + GPE0_EN(2)); + ps->gpe0_en[3] = inl(ACPI_BASE_ADDRESS + GPE0_EN(3)); + + ps->gen_pmcon1 = pci_read_config16(PCH_DEV_LPC, GEN_PMCON_1); + ps->gen_pmcon2 = pci_read_config16(PCH_DEV_LPC, GEN_PMCON_2); + ps->gen_pmcon3 = pci_read_config16(PCH_DEV_LPC, GEN_PMCON_3); + + ps->prev_sleep_state = prev_sleep_state(ps); + + dump_power_state(ps); + + return ps; +} diff --git a/src/soc/intel/skylake/romstage/raminit.c b/src/soc/intel/skylake/romstage/raminit.c new file mode 100644 index 0000000..52ea491 --- /dev/null +++ b/src/soc/intel/skylake/romstage/raminit.c @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/cbfs.h> +#include <arch/io.h> +#include <cbfs.h> +#include <cbmem.h> +#include <console/console.h> +#include <device/pci_def.h> +#include <lib.h> +#include <string.h> +#if CONFIG_EC_GOOGLE_CHROMEEC +#include <ec/google/chromeec/ec.h> +#include <ec/google/chromeec/ec_commands.h> +#endif +#include <stage_cache.h> +#include <vendorcode/google/chromeos/chromeos.h> +#include <soc/intel/common/mrc_cache.h> +#include <soc/iomap.h> +#include <soc/pei_data.h> +#include <soc/pei_wrapper.h> +#include <soc/pm.h> +#include <soc/reset.h> +#include <soc/romstage.h> +#include <soc/smm.h> +#include <soc/systemagent.h> + +/* + * Find PEI executable in coreboot filesystem and execute it. + */ +void raminit(struct pei_data *pei_data) +{ + const struct mrc_saved_data *cache; + struct memory_info* mem_info; + pei_wrapper_entry_t entry; + int ret; + + broadwell_fill_pei_data(pei_data); + + if (recovery_mode_enabled()) { + /* Recovery mode does not use MRC cache */ + printk(BIOS_DEBUG, "Recovery mode: not using MRC cache.\n"); + } else if (!mrc_cache_get_current(&cache)) { + /* MRC cache found */ + pei_data->saved_data_size = cache->size; + pei_data->saved_data = &cache->data[0]; + } else if (pei_data->boot_mode == SLEEP_STATE_S3) { + /* Waking from S3 and no cache. */ + printk(BIOS_DEBUG, "No MRC cache found in S3 resume path.\n"); + post_code(POST_RESUME_FAILURE); + reset_system(); + } else { + printk(BIOS_DEBUG, "No MRC cache found.\n"); +#if CONFIG_EC_GOOGLE_CHROMEEC + if (pei_data->boot_mode == SLEEP_STATE_S0) { + /* Ensure EC is running RO firmware. */ + google_chromeec_check_ec_image(EC_IMAGE_RO); + } +#endif + } + + /* + * Do not use saved pei data. Can be set by mainboard romstage + * to force a full train of memory on every boot. + */ + if (pei_data->disable_saved_data) { + printk(BIOS_DEBUG, "Disabling PEI saved data by request\n"); + pei_data->saved_data = NULL; + pei_data->saved_data_size = 0; + } + + /* Determine if mrc.bin is in the cbfs. */ + entry = (pei_wrapper_entry_t)cbfs_get_file_content( + CBFS_DEFAULT_MEDIA, "mrc.bin", CBFS_TYPE_MRC, NULL); + if (entry == NULL) { + printk(BIOS_DEBUG, "Couldn't find mrc.bin\n"); + return; + } + + printk(BIOS_DEBUG, "Starting Memory Reference Code\n"); + + ret = entry(pei_data); + if (ret < 0) + die("pei_data version mismatch\n"); + + /* Print the MRC version after executing the UEFI PEI stage. */ + u32 version = MCHBAR32(MCHBAR_PEI_VERSION); + printk(BIOS_DEBUG, "MRC Version %d.%d.%d Build %d\n", + version >> 24 , (version >> 16) & 0xff, + (version >> 8) & 0xff, version & 0xff); + + report_memory_config(); + + /* Basic memory sanity test */ + quick_ram_check(); + + if (pei_data->boot_mode != SLEEP_STATE_S3) { + cbmem_initialize_empty(); + stage_cache_create_empty(); + } else { + stage_cache_recover(); + if (cbmem_initialize()) { +#if CONFIG_HAVE_ACPI_RESUME + printk(BIOS_DEBUG, "Failed to recover CBMEM in S3 resume.\n"); + /* Failed S3 resume, reset to come up cleanly */ + reset_system(); +#endif + } + } + + printk(BIOS_DEBUG, "MRC data at %p %d bytes\n", pei_data->data_to_save, + pei_data->data_to_save_size); + + if (pei_data->data_to_save != NULL && pei_data->data_to_save_size > 0) + mrc_cache_stash_data(pei_data->data_to_save, + pei_data->data_to_save_size); + + printk(BIOS_DEBUG, "create cbmem for dimm information\n"); + mem_info = cbmem_add(CBMEM_ID_MEMINFO, sizeof(struct memory_info)); + memcpy(mem_info, &pei_data->meminfo, sizeof(struct memory_info)); + +} diff --git a/src/soc/intel/skylake/romstage/report_platform.c b/src/soc/intel/skylake/romstage/report_platform.c new file mode 100644 index 0000000..713b3e7 --- /dev/null +++ b/src/soc/intel/skylake/romstage/report_platform.c @@ -0,0 +1,243 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/cpu.h> +#include <arch/io.h> +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <cpu/x86/msr.h> +#include <soc/cpu.h> +#include <soc/pch.h> +#include <soc/pci_devs.h> +#include <soc/romstage.h> +#include <soc/systemagent.h> + +static struct { + u32 cpuid; + const char *name; +} cpu_table[] = { + { CPUID_HASWELL_A0, "Haswell A0" }, + { CPUID_HASWELL_B0, "Haswell B0" }, + { CPUID_HASWELL_C0, "Haswell C0" }, + { CPUID_HASWELL_ULT_B0, "Haswell ULT B0" }, + { CPUID_HASWELL_ULT, "Haswell ULT C0 or D0" }, + { CPUID_HASWELL_HALO, "Haswell Perf Halo" }, + { CPUID_BROADWELL_C0, "Broadwell C0" }, + { CPUID_BROADWELL_D0, "Broadwell D0" }, + { CPUID_BROADWELL_E0, "Broadwell E0 or F0" }, +}; + +static struct { + u8 revid; + const char *name; +} mch_rev_table[] = { + { MCH_BROADWELL_REV_D0, "Broadwell D0" }, + { MCH_BROADWELL_REV_E0, "Broadwell E0" }, + { MCH_BROADWELL_REV_F0, "Broadwell F0" }, +}; + +static struct { + u16 lpcid; + const char *name; +} pch_table[] = { + { PCH_LPT_LP_SAMPLE, "LynxPoint LP Sample" }, + { PCH_LPT_LP_PREMIUM, "LynxPoint LP Premium" }, + { PCH_LPT_LP_MAINSTREAM, "LynxPoint LP Mainstream" }, + { PCH_LPT_LP_VALUE, "LynxPoint LP Value" }, + { PCH_WPT_HSW_U_SAMPLE, "Haswell U Sample" }, + { PCH_WPT_BDW_U_SAMPLE, "Broadwell U Sample" }, + { PCH_WPT_BDW_U_PREMIUM, "Broadwell U Premium" }, + { PCH_WPT_BDW_U_BASE, "Broadwell U Base" }, + { PCH_WPT_BDW_Y_SAMPLE, "Broadwell Y Sample" }, + { PCH_WPT_BDW_Y_PREMIUM, "Broadwell Y Premium" }, + { PCH_WPT_BDW_Y_BASE, "Broadwell Y Base" }, + { PCH_WPT_BDW_H, "Broadwell H" }, +}; + +static struct { + u16 igdid; + const char *name; +} igd_table[] = { + { IGD_HASWELL_ULT_GT1, "Haswell ULT GT1" }, + { IGD_HASWELL_ULT_GT2, "Haswell ULT GT2" }, + { IGD_HASWELL_ULT_GT3, "Haswell ULT GT3" }, + { IGD_BROADWELL_U_GT1, "Broadwell U GT1" }, + { IGD_BROADWELL_U_GT2, "Broadwell U GT2" }, + { IGD_BROADWELL_U_GT3_15W, "Broadwell U GT3 (15W)" }, + { IGD_BROADWELL_U_GT3_28W, "Broadwell U GT3 (28W)" }, + { IGD_BROADWELL_Y_GT2, "Broadwell Y GT2" }, + { IGD_BROADWELL_H_GT2, "Broadwell U GT2" }, + { IGD_BROADWELL_H_GT3, "Broadwell U GT3" }, +}; + +static void report_cpu_info(void) +{ + struct cpuid_result cpuidr; + u32 i, index; + char cpu_string[50], *cpu_name = cpu_string; /* 48 bytes are reported */ + int vt, txt, aes; + msr_t microcode_ver; + const char *mode[] = {"NOT ", ""}; + const char *cpu_type = "Unknown"; + + index = 0x80000000; + cpuidr = cpuid(index); + if (cpuidr.eax < 0x80000004) { + strcpy(cpu_string, "Platform info not available"); + } else { + u32 *p = (u32*) cpu_string; + for (i = 2; i <= 4 ; i++) { + cpuidr = cpuid(index + i); + *p++ = cpuidr.eax; + *p++ = cpuidr.ebx; + *p++ = cpuidr.ecx; + *p++ = cpuidr.edx; + } + } + /* Skip leading spaces in CPU name string */ + while (cpu_name[0] == ' ') + cpu_name++; + + microcode_ver.lo = 0; + microcode_ver.hi = 0; + wrmsr(0x8B, microcode_ver); + cpuidr = cpuid(1); + microcode_ver = rdmsr(0x8b); + + /* Look for string to match the name */ + for (i = 0; i < ARRAY_SIZE(cpu_table); i++) { + if (cpu_table[i].cpuid == cpuidr.eax) { + cpu_type = cpu_table[i].name; + break; + } + } + + printk(BIOS_DEBUG, "CPU: %s\n", cpu_name); + printk(BIOS_DEBUG, "CPU: ID %x, %s, ucode: %08x\n", + cpuidr.eax, cpu_type, microcode_ver.hi); + + aes = (cpuidr.ecx & (1 << 25)) ? 1 : 0; + txt = (cpuidr.ecx & (1 << 6)) ? 1 : 0; + vt = (cpuidr.ecx & (1 << 5)) ? 1 : 0; + printk(BIOS_DEBUG, "CPU: AES %ssupported, TXT %ssupported, " + "VT %ssupported\n", mode[aes], mode[txt], mode[vt]); +} + +static void report_mch_info(void) +{ + int i; + u16 mch_device = pci_read_config16(SA_DEV_ROOT, PCI_DEVICE_ID); + u8 mch_revision = pci_read_config8(SA_DEV_ROOT, PCI_REVISION_ID); + const char *mch_type = "Unknown"; + + /* Look for string to match the revision for Broadwell U/Y */ + if (mch_device == MCH_BROADWELL_ID_U_Y) { + for (i = 0; i < ARRAY_SIZE(mch_rev_table); i++) { + if (mch_rev_table[i].revid == mch_revision) { + mch_type = mch_rev_table[i].name; + break; + } + } + } + + printk(BIOS_DEBUG, "MCH: device id %04x (rev %02x) is %s\n", + mch_device, mch_revision, mch_type); +} + +static void report_pch_info(void) +{ + int i; + u16 lpcid = pch_type(); + const char *pch_type = "Unknown"; + + for (i = 0; i < ARRAY_SIZE(pch_table); i++) { + if (pch_table[i].lpcid == lpcid) { + pch_type = pch_table[i].name; + break; + } + } + printk(BIOS_DEBUG, "PCH: device id %04x (rev %02x) is %s\n", + lpcid, pch_revision(), pch_type); +} + +static void report_igd_info(void) +{ + int i; + u16 igdid = pci_read_config16(SA_DEV_IGD, PCI_DEVICE_ID); + const char *igd_type = "Unknown"; + + for (i = 0; i < ARRAY_SIZE(igd_table); i++) { + if (igd_table[i].igdid == igdid) { + igd_type = igd_table[i].name; + break; + } + } + printk(BIOS_DEBUG, "IGD: device id %04x (rev %02x) is %s\n", + igdid, pci_read_config8(SA_DEV_IGD, PCI_REVISION_ID), igd_type); +} + +void report_platform_info(void) +{ + report_cpu_info(); + report_mch_info(); + report_pch_info(); + report_igd_info(); +} + +/* + * Dump in the log memory controller configuration as read from the memory + * controller registers. + */ +void report_memory_config(void) +{ + u32 addr_decoder_common, addr_decode_ch[2]; + int i; + + addr_decoder_common = MCHBAR32(0x5000); + addr_decode_ch[0] = MCHBAR32(0x5004); + addr_decode_ch[1] = MCHBAR32(0x5008); + + printk(BIOS_DEBUG, "memcfg DDR3 clock %d MHz\n", + (MCHBAR32(0x5e04) * 13333 * 2 + 50)/100); + printk(BIOS_DEBUG, "memcfg channel assignment: A: %d, B % d, C % d\n", + addr_decoder_common & 3, + (addr_decoder_common >> 2) & 3, + (addr_decoder_common >> 4) & 3); + + for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) { + u32 ch_conf = addr_decode_ch[i]; + printk(BIOS_DEBUG, "memcfg channel[%d] config (%8.8x):\n", + i, ch_conf); + printk(BIOS_DEBUG, " enhanced interleave mode %s\n", + ((ch_conf >> 22) & 1) ? "on" : "off"); + printk(BIOS_DEBUG, " rank interleave %s\n", + ((ch_conf >> 21) & 1) ? "on" : "off"); + printk(BIOS_DEBUG, " DIMMA %d MB width %s %s rank%s\n", + ((ch_conf >> 0) & 0xff) * 256, + ((ch_conf >> 19) & 1) ? "x16" : "x8 or x32", + ((ch_conf >> 17) & 1) ? "dual" : "single", + ((ch_conf >> 16) & 1) ? "" : ", selected"); + printk(BIOS_DEBUG, " DIMMB %d MB width %s %s rank%s\n", + ((ch_conf >> 8) & 0xff) * 256, + ((ch_conf >> 19) & 1) ? "x16" : "x8 or x32", + ((ch_conf >> 18) & 1) ? "dual" : "single", + ((ch_conf >> 16) & 1) ? ", selected" : ""); + } +} diff --git a/src/soc/intel/skylake/romstage/romstage.c b/src/soc/intel/skylake/romstage/romstage.c new file mode 100644 index 0000000..c026004 --- /dev/null +++ b/src/soc/intel/skylake/romstage/romstage.c @@ -0,0 +1,164 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stddef.h> +#include <stdint.h> +#include <arch/cpu.h> +#include <arch/io.h> +#include <arch/cbfs.h> +#include <arch/stages.h> +#include <arch/early_variables.h> +#include <console/console.h> +#include <cbfs.h> +#include <cbmem.h> +#include <cpu/x86/mtrr.h> +#include <elog.h> +#include <romstage_handoff.h> +#include <stage_cache.h> +#include <timestamp.h> +#include <soc/me.h> +#include <soc/pei_data.h> +#include <soc/pm.h> +#include <soc/reset.h> +#include <soc/romstage.h> +#include <soc/spi.h> +#include <vendorcode/google/chromeos/chromeos.h> + +/* Entry from cache-as-ram.inc. */ +void * asmlinkage romstage_main(unsigned long bist, + uint32_t tsc_low, uint32_t tsc_hi) +{ + struct romstage_params rp = { + .bist = bist, + .pei_data = NULL, + }; + + post_code(0x30); + + /* Save initial timestamp from bootblock. */ + timestamp_init((((uint64_t)tsc_hi) << 32) | (uint64_t)tsc_low); + + /* Save romstage begin */ + timestamp_add_now(TS_START_ROMSTAGE); + + /* System Agent Early Initialization */ + systemagent_early_init(); + + /* PCH Early Initialization */ + pch_early_init(); + + /* Call into mainboard pre console init. Needed to enable serial port + on IT8772 */ + mainboard_pre_console_init(); + + /* Start console drivers */ + console_init(); + + /* Get power state */ + rp.power_state = fill_power_state(); + + /* Print useful platform information */ + report_platform_info(); + + /* Set CPU frequency to maximum */ + set_max_freq(); + + /* Call into mainboard. */ + mainboard_romstage_entry(&rp); + +#if CONFIG_CHROMEOS + save_chromeos_gpios(); +#endif + + return setup_stack_and_mttrs(); +} + +static inline void chromeos_init(int prev_sleep_state) +{ +#if CONFIG_CHROMEOS + /* Normalize the sleep state to what init_chromeos() wants for S3: 2 */ + init_chromeos(prev_sleep_state == SLEEP_STATE_S3 ? 2 : 0); +#endif +} + +/* Entry from the mainboard. */ +void romstage_common(struct romstage_params *params) +{ + struct romstage_handoff *handoff; + + post_code(0x32); + + timestamp_add_now(TS_BEFORE_INITRAM); + + params->pei_data->boot_mode = params->power_state->prev_sleep_state; + +#if CONFIG_ELOG_BOOT_COUNT + if (params->power_state->prev_sleep_state != SLEEP_STATE_S3) + boot_count_increment(); +#endif + + /* Print ME state before MRC */ + intel_me_status(); + + /* Save ME HSIO version */ + intel_me_hsio_version(&params->power_state->hsio_version, + &params->power_state->hsio_checksum); + + /* Initialize RAM */ + raminit(params->pei_data); + + timestamp_add_now(TS_AFTER_INITRAM); + + handoff = romstage_handoff_find_or_add(); + if (handoff != NULL) + handoff->s3_resume = (params->power_state->prev_sleep_state == + SLEEP_STATE_S3); + else + printk(BIOS_DEBUG, "Romstage handoff structure not added!\n"); + + chromeos_init(params->power_state->prev_sleep_state); +} + +void asmlinkage romstage_after_car(void) +{ + timestamp_add_now(TS_END_ROMSTAGE); + + /* Load the ramstage. */ + copy_and_run(); + while (1); +} + +void ramstage_cache_invalid(void) +{ +#if CONFIG_RESET_ON_INVALID_RAMSTAGE_CACHE + /* Perform cold reset on invalid ramstage cache. */ + reset_system(); +#endif +} + +#if CONFIG_CHROMEOS +int vboot_get_sw_write_protect(void) +{ + u8 status; + /* Return unprotected status if status read fails. */ + return (early_spi_read_wpsr(&status) ? 0 : !!(status & 0x80)); +} + +#endif +void __attribute__((weak)) mainboard_pre_console_init(void) {} diff --git a/src/soc/intel/skylake/romstage/smbus.c b/src/soc/intel/skylake/romstage/smbus.c new file mode 100644 index 0000000..f09459b --- /dev/null +++ b/src/soc/intel/skylake/romstage/smbus.c @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <device/pci_def.h> +#include <reg_script.h> +#include <soc/iomap.h> +#include <soc/pci_devs.h> +#include <soc/smbus.h> +#include <soc/romstage.h> + +static const struct reg_script smbus_init_script[] = { + /* Set SMBUS I/O base address */ + REG_PCI_WRITE32(SMB_BASE, SMBUS_BASE_ADDRESS | 1), + /* Set SMBUS enable */ + REG_PCI_WRITE8(HOSTC, HST_EN), + /* Enable I/O access */ + REG_PCI_WRITE16(PCI_COMMAND, PCI_COMMAND_IO), + /* Disable interrupts */ + REG_IO_WRITE8(SMBUS_BASE_ADDRESS + SMBHSTCTL, 0), + /* Clear errors */ + REG_IO_WRITE8(SMBUS_BASE_ADDRESS + SMBHSTSTAT, 0xff), + /* Indicate the end of this array by REG_SCRIPT_END */ + REG_SCRIPT_END, +}; + +void enable_smbus(void) +{ + reg_script_run_on_dev(PCH_DEV_SMBUS, smbus_init_script); +} + +int smbus_read_byte(unsigned device, unsigned address) +{ + return do_smbus_read_byte(SMBUS_BASE_ADDRESS, device, address); +} diff --git a/src/soc/intel/skylake/romstage/spi.c b/src/soc/intel/skylake/romstage/spi.c new file mode 100644 index 0000000..a2c5d33 --- /dev/null +++ b/src/soc/intel/skylake/romstage/spi.c @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <device/pci_def.h> +#include <delay.h> +#include <soc/spi.h> +#include <soc/rcba.h> +#include <soc/romstage.h> + +#define SPI_DELAY 10 /* 10us */ +#define SPI_RETRY 200000 /* 2s */ + +static int early_spi_read_block(u32 offset, u8 size, u8 *buffer) +{ + u32 *ptr32 = (u32*)buffer; + u32 i; + + /* Clear status bits */ + SPIBAR16(SPIBAR_HSFS) |= SPIBAR_HSFS_AEL | SPIBAR_HSFS_FCERR | + SPIBAR_HSFS_FDONE; + + if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { + printk(BIOS_ERR, "SPI ERROR: transaction in progress\n"); + return -1; + } + + /* Set flash address */ + SPIBAR32(SPIBAR_FADDR) = offset; + + /* Setup read transaction */ + SPIBAR16(SPIBAR_HSFC) = SPIBAR_HSFC_BYTE_COUNT(size) | + SPIBAR_HSFC_CYCLE_READ; + + /* Start transaction */ + SPIBAR16(SPIBAR_HSFC) |= SPIBAR_HSFC_GO; + + /* Wait for completion */ + for (i = 0; i < SPI_RETRY; i++) { + if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { + /* Cycle in progress, wait 1ms */ + udelay(SPI_DELAY); + continue; + } + + if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_AEL) { + printk(BIOS_ERR, "SPI ERROR: Access Error\n"); + return -1; + + } + + if (SPIBAR16(SPIBAR_HSFS) & SPIBAR_HSFS_FCERR) { + printk(BIOS_ERR, "SPI ERROR: Flash Cycle Error\n"); + return -1; + } + break; + } + + if (i >= SPI_RETRY) { + printk(BIOS_ERR, "SPI ERROR: Timeout\n"); + return -1; + } + + /* Read the data */ + for (i = 0; i < size; i+=sizeof(u32)) { + if (size-i >= 4) { + /* reading >= dword */ + *ptr32++ = SPIBAR32(SPIBAR_FDATA(i/sizeof(u32))); + } else { + /* reading < dword */ + u8 j, *ptr8 = (u8*)ptr32; + u32 temp = SPIBAR32(SPIBAR_FDATA(i/sizeof(u32))); + for (j = 0; j < (size-i); j++) { + *ptr8++ = temp & 0xff; + temp >>= 8; + } + } + } + + return size; +} + +int early_spi_read(u32 offset, u32 size, u8 *buffer) +{ + u32 current = 0; + + while (size > 0) { + u8 count = (size < 64) ? size : 64; + if (early_spi_read_block(offset + current, count, + buffer + current) < 0) + return -1; + size -= count; + current += count; + } + + return 0; +} + +/* + * Minimal set of commands to read WPSR from SPI. + * Don't use this code outside romstage -- it trashes the opmenu table. + * Returns 0 on success, < 0 on failure. + */ +int early_spi_read_wpsr(u8 *sr) +{ + int retry; + + /* No address associated with rdsr */ + SPIBAR8(SPIBAR_OPTYPE) = 0x0; + /* Setup opcode[0] = read wpsr */ + SPIBAR8(SPIBAR_OPMENU_LOWER) = 0x5; + + /* Start transaction */ + SPIBAR16(SPIBAR_SSFC) = SPIBAR_SSFC_DATA | SPIBAR_SSFC_GO; + + /* Wait for error / complete status */ + for (retry = SPI_RETRY; retry; retry--) { + u16 status = SPIBAR16(SPIBAR_SSFS); + if (status & SPIBAR_SSFS_ERROR) { + printk(BIOS_ERR, "SPI rdsr failed\n"); + return -1; + } else if (status & SPIBAR_SSFS_DONE) { + break; + } + + udelay(SPI_DELAY); + } + + *sr = SPIBAR32(SPIBAR_FDATA(0)) & 0xff; + return 0; +} diff --git a/src/soc/intel/skylake/romstage/stack.c b/src/soc/intel/skylake/romstage/stack.c new file mode 100644 index 0000000..a81eb07 --- /dev/null +++ b/src/soc/intel/skylake/romstage/stack.c @@ -0,0 +1,124 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stddef.h> +#include <stdint.h> +#include <arch/cpu.h> +#include <arch/early_variables.h> +#include <console/console.h> +#include <cbmem.h> +#include <cpu/x86/mtrr.h> +#include <soc/romstage.h> + +static inline uint32_t *stack_push(u32 *stack, u32 value) +{ + stack = &stack[-1]; + *stack = value; + return stack; +} + +/* Romstage needs quite a bit of stack for decompressing images since the lzma + * lib keeps its state on the stack during romstage. */ +static unsigned long choose_top_of_stack(void) +{ + unsigned long stack_top; + const unsigned long romstage_ram_stack_size = 0x5000; + + /* cbmem_add() does a find() before add(). */ + stack_top = (unsigned long)cbmem_add(CBMEM_ID_ROMSTAGE_RAM_STACK, + romstage_ram_stack_size); + stack_top += romstage_ram_stack_size; + return stack_top; +} + +/* setup_stack_and_mttrs() determines the stack to use after + * cache-as-ram is torn down as well as the MTRR settings to use. */ +void *setup_stack_and_mttrs(void) +{ + unsigned long top_of_stack; + int num_mtrrs; + uint32_t *slot; + uint32_t mtrr_mask_upper; + uint32_t top_of_ram; + + /* Top of stack needs to be aligned to a 4-byte boundary. */ + top_of_stack = choose_top_of_stack() & ~3; + slot = (void *)top_of_stack; + num_mtrrs = 0; + + /* The upper bits of the MTRR mask need to set according to the number + * of physical address bits. */ + mtrr_mask_upper = (1 << ((cpuid_eax(0x80000008) & 0xff) - 32)) - 1; + + /* The order for each MTTR is value then base with upper 32-bits of + * each value coming before the lower 32-bits. The reasoning for + * this ordering is to create a stack layout like the following: + * +0: Number of MTRRs + * +4: MTTR base 0 31:0 + * +8: MTTR base 0 63:32 + * +12: MTTR mask 0 31:0 + * +16: MTTR mask 0 63:32 + * +20: MTTR base 1 31:0 + * +24: MTTR base 1 63:32 + * +28: MTTR mask 1 31:0 + * +32: MTTR mask 1 63:32 + */ + + /* Cache the ROM as WP just below 4GiB. */ + slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ + slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRRphysMaskValid); + slot = stack_push(slot, 0); /* upper base */ + slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRR_TYPE_WRPROT); + num_mtrrs++; + + /* Cache RAM as WB from 0 -> CONFIG_RAMTOP. */ + slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ + slot = stack_push(slot, ~(CONFIG_RAMTOP - 1) | MTRRphysMaskValid); + slot = stack_push(slot, 0); /* upper base */ + slot = stack_push(slot, 0 | MTRR_TYPE_WRBACK); + num_mtrrs++; + + top_of_ram = (uint32_t)cbmem_top(); + /* Cache 8MiB below the top of ram. The top of ram under 4GiB is the + * start of the TSEG region. It is required to be 8MiB aligned. Set + * this area as cacheable so it can be used later for ramstage before + * setting up the entire RAM as cacheable. */ + slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ + slot = stack_push(slot, ~((8 << 20) - 1) | MTRRphysMaskValid); + slot = stack_push(slot, 0); /* upper base */ + slot = stack_push(slot, (top_of_ram - (8 << 20)) | MTRR_TYPE_WRBACK); + num_mtrrs++; + + /* Cache 8MiB at the top of ram. Top of ram is where the TSEG + * region resides. However, it is not restricted to SMM mode until + * SMM has been relocated. By setting the region to cacheable it + * provides faster access when relocating the SMM handler as well + * as using the TSEG region for other purposes. */ + slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ + slot = stack_push(slot, ~((8 << 20) - 1) | MTRRphysMaskValid); + slot = stack_push(slot, 0); /* upper base */ + slot = stack_push(slot, top_of_ram | MTRR_TYPE_WRBACK); + num_mtrrs++; + + /* Save the number of MTTRs to setup. Return the stack location + * pointing to the number of MTRRs. */ + slot = stack_push(slot, num_mtrrs); + + return slot; +} diff --git a/src/soc/intel/skylake/romstage/systemagent.c b/src/soc/intel/skylake/romstage/systemagent.c new file mode 100644 index 0000000..7a43917 --- /dev/null +++ b/src/soc/intel/skylake/romstage/systemagent.c @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdlib.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <reg_script.h> +#include <soc/iomap.h> +#include <soc/pci_devs.h> +#include <soc/romstage.h> +#include <soc/systemagent.h> + +static const struct reg_script systemagent_early_init_script[] = { + REG_PCI_WRITE32(MCHBAR, MCH_BASE_ADDRESS | 1), + REG_PCI_WRITE32(DMIBAR, DMI_BASE_ADDRESS | 1), + REG_PCI_WRITE32(EPBAR, EP_BASE_ADDRESS | 1), + REG_MMIO_WRITE32(MCH_BASE_ADDRESS + EDRAMBAR, EDRAM_BASE_ADDRESS | 1), + REG_MMIO_WRITE32(MCH_BASE_ADDRESS + GDXCBAR, GDXC_BASE_ADDRESS | 1), + + /* Set C0000-FFFFF to access RAM on both reads and writes */ + REG_PCI_WRITE8(PAM0, 0x30), + REG_PCI_WRITE8(PAM1, 0x33), + REG_PCI_WRITE8(PAM2, 0x33), + REG_PCI_WRITE8(PAM3, 0x33), + REG_PCI_WRITE8(PAM4, 0x33), + REG_PCI_WRITE8(PAM5, 0x33), + REG_PCI_WRITE8(PAM6, 0x33), + + /* Device enable: IGD and Mini-HD */ + REG_PCI_WRITE32(DEVEN, DEVEN_D0EN | DEVEN_D2EN | DEVEN_D3EN), + + REG_SCRIPT_END +}; + +void systemagent_early_init(void) +{ + reg_script_run_on_dev(SA_DEV_ROOT, systemagent_early_init_script); +} diff --git a/src/soc/intel/skylake/romstage/uart.c b/src/soc/intel/skylake/romstage/uart.c new file mode 100644 index 0000000..96c9634 --- /dev/null +++ b/src/soc/intel/skylake/romstage/uart.c @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/early_variables.h> +#include <arch/io.h> +#include <delay.h> +#include <device/pci_def.h> +#include <reg_script.h> +#include <stdint.h> +#include <uart8250.h> +#include <soc/iobp.h> +#include <soc/serialio.h> + +const struct reg_script uart_init[] = { + /* Set MMIO BAR */ + REG_PCI_WRITE32(PCI_BASE_ADDRESS_0, CONFIG_TTYS0_BASE), + /* Enable Memory access and Bus Master */ + REG_PCI_OR32(PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER), + /* Initialize LTR */ + REG_MMIO_RMW32(CONFIG_TTYS0_BASE + SIO_REG_PPR_GEN, + ~SIO_REG_PPR_GEN_LTR_MODE_MASK, 0), + REG_MMIO_RMW32(CONFIG_TTYS0_BASE + SIO_REG_PPR_RST, + ~(SIO_REG_PPR_RST_ASSERT), 0), + /* Take UART out of reset */ + REG_MMIO_OR32(CONFIG_TTYS0_BASE + SIO_REG_PPR_RST, + SIO_REG_PPR_RST_ASSERT), + /* Set M and N divisor inputs and enable clock */ + REG_MMIO_WRITE32(CONFIG_TTYS0_BASE + SIO_REG_PPR_CLOCK, + SIO_REG_PPR_CLOCK_EN | SIO_REG_PPR_CLOCK_UPDATE | + (SIO_REG_PPR_CLOCK_N_DIV << 16) | + (SIO_REG_PPR_CLOCK_M_DIV << 1)), + REG_SCRIPT_END +}; + +void pch_uart_init(void) +{ + /* Program IOBP CB000154h[12,9:8,4:0] = 1001100011111b */ + u32 gpiodf = 0x131f; + device_t dev; + + /* Put UART in byte access mode for 16550 compatibility */ + switch (CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER) { + case 0: + dev = PCH_DEV_UART0; + gpiodf |= SIO_IOBP_GPIODF_UART0_BYTE_ACCESS; + break; + case 1: + dev = PCH_DEV_UART1; + gpiodf |= SIO_IOBP_GPIODF_UART1_BYTE_ACCESS; + break; + default: + return; + } + + /* Program IOBP GPIODF */ + pch_iobp_update(SIO_IOBP_GPIODF, ~gpiodf, gpiodf); + + /* Program IOBP CB000180h[5:0] = 111111b (undefined register) */ + pch_iobp_update(0xcb000180, ~0x0000003f, 0x0000003f); + + /* Initialize chipset uart interface */ + reg_script_run_on_dev(dev, uart_init); + + /* + * Perform standard UART initialization + * Divisor 1 is 115200 BAUD + */ + uart8250_mem_init(CONFIG_TTYS0_BASE, 1); +} diff --git a/src/soc/intel/skylake/sata.c b/src/soc/intel/skylake/sata.c new file mode 100644 index 0000000..d3cf525 --- /dev/null +++ b/src/soc/intel/skylake/sata.c @@ -0,0 +1,264 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <delay.h> +#include <soc/iobp.h> +#include <soc/ramstage.h> +#include <soc/rcba.h> +#include <soc/sata.h> +#include <soc/intel/broadwell/chip.h> + +static inline u32 sir_read(struct device *dev, int idx) +{ + pci_write_config32(dev, SATA_SIRI, idx); + return pci_read_config32(dev, SATA_SIRD); +} + +static inline void sir_write(struct device *dev, int idx, u32 value) +{ + pci_write_config32(dev, SATA_SIRI, idx); + pci_write_config32(dev, SATA_SIRD, value); +} + +static void sata_init(struct device *dev) +{ + config_t *config = dev->chip_info; + u32 reg32; + u8 *abar; + u16 reg16; + int port; + + printk(BIOS_DEBUG, "SATA: Initializing controller in AHCI mode.\n"); + + /* Enable BARs */ + pci_write_config16(dev, PCI_COMMAND, 0x0007); + + /* Set Interrupt Line */ + /* Interrupt Pin is set by D31IP.PIP */ + pci_write_config8(dev, PCI_INTERRUPT_LINE, 0x0a); + + /* Set timings */ + pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE); + pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE); + + /* for AHCI, Port Enable is managed in memory mapped space */ + reg16 = pci_read_config16(dev, 0x92); + reg16 &= ~0xf; + reg16 |= 0x8000 | config->sata_port_map; + pci_write_config16(dev, 0x92, reg16); + udelay(2); + + /* Setup register 98h */ + reg32 = pci_read_config32(dev, 0x98); + reg32 &= ~((1 << 31) | (1 << 30)); + reg32 |= 1 << 23; + reg32 |= 1 << 24; /* Enable MPHY Dynamic Power Gating */ + pci_write_config32(dev, 0x98, reg32); + + /* Setup register 9Ch */ + reg16 = 0; /* Disable alternate ID */ + reg16 = 1 << 5; /* BWG step 12 */ + pci_write_config16(dev, 0x9c, reg16); + + /* SATA Initialization register */ + reg32 = 0x183; + reg32 |= (config->sata_port_map ^ 0xf) << 24; + reg32 |= (config->sata_devslp_mux & 1) << 15; + pci_write_config32(dev, 0x94, reg32); + + /* Initialize AHCI memory-mapped space */ + abar = (u8 *)(pci_read_config32(dev, PCI_BASE_ADDRESS_5)); + printk(BIOS_DEBUG, "ABAR: %p\n", abar); + + /* CAP (HBA Capabilities) : enable power management */ + reg32 = read32(abar + 0x00); + reg32 |= 0x0c006000; /* set PSC+SSC+SALP+SSS */ + reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */ + reg32 |= (1 << 18); /* SAM: SATA AHCI MODE ONLY */ + write32(abar + 0x00, reg32); + + /* PI (Ports implemented) */ + write32(abar + 0x0c, config->sata_port_map); + (void) read32(abar + 0x0c); /* Read back 1 */ + (void) read32(abar + 0x0c); /* Read back 2 */ + + /* CAP2 (HBA Capabilities Extended)*/ + if (config->sata_devslp_disable) { + reg32 = read32(abar + 0x24); + reg32 &= ~(1 << 3); + write32(abar + 0x24, reg32); + } else { + /* Enable DEVSLP */ + reg32 = read32(abar + 0x24); + reg32 |= (1 << 5)|(1 << 4)|(1 << 3)|(1 << 2); + write32(abar + 0x24, reg32); + + for (port = 0; port < 4; port++) { + if (!(config->sata_port_map & (1 << port))) + continue; + reg32 = read32(abar + 0x144 + (0x80 * port)); + reg32 |= (1 << 1); /* DEVSLP DSP */ + write32(abar + 0x144 + (0x80 * port), reg32); + } + } + + /* + * Static Power Gating for unused ports + */ + reg32 = RCBA32(0x3a84); + /* Port 3 and 2 disabled */ + if ((config->sata_port_map & ((1 << 3)|(1 << 2))) == 0) + reg32 |= (1 << 24) | (1 << 26); + /* Port 1 and 0 disabled */ + if ((config->sata_port_map & ((1 << 1)|(1 << 0))) == 0) + reg32 |= (1 << 20) | (1 << 18); + RCBA32(0x3a84) = reg32; + + /* Set Gen3 Transmitter settings if needed */ + if (config->sata_port0_gen3_tx) + pch_iobp_update(SATA_IOBP_SP0_SECRT88, + ~(SATA_SECRT88_VADJ_MASK << + SATA_SECRT88_VADJ_SHIFT), + (config->sata_port0_gen3_tx & + SATA_SECRT88_VADJ_MASK) + << SATA_SECRT88_VADJ_SHIFT); + + if (config->sata_port1_gen3_tx) + pch_iobp_update(SATA_IOBP_SP1_SECRT88, + ~(SATA_SECRT88_VADJ_MASK << + SATA_SECRT88_VADJ_SHIFT), + (config->sata_port1_gen3_tx & + SATA_SECRT88_VADJ_MASK) + << SATA_SECRT88_VADJ_SHIFT); + + /* Set Gen3 DTLE DATA / EDGE registers if needed */ + if (config->sata_port0_gen3_dtle) { + pch_iobp_update(SATA_IOBP_SP0DTLE_DATA, + ~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT), + (config->sata_port0_gen3_dtle & SATA_DTLE_MASK) + << SATA_DTLE_DATA_SHIFT); + + pch_iobp_update(SATA_IOBP_SP0DTLE_EDGE, + ~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT), + (config->sata_port0_gen3_dtle & SATA_DTLE_MASK) + << SATA_DTLE_EDGE_SHIFT); + } + + if (config->sata_port1_gen3_dtle) { + pch_iobp_update(SATA_IOBP_SP1DTLE_DATA, + ~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT), + (config->sata_port1_gen3_dtle & SATA_DTLE_MASK) + << SATA_DTLE_DATA_SHIFT); + + pch_iobp_update(SATA_IOBP_SP1DTLE_EDGE, + ~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT), + (config->sata_port1_gen3_dtle & SATA_DTLE_MASK) + << SATA_DTLE_EDGE_SHIFT); + } + + /* + * Additional Programming Requirements for Power Optimizer + */ + + /* Step 1 */ + sir_write(dev, 0x64, 0x883c9003); + + /* Step 2: SIR 68h[15:0] = 880Ah */ + reg32 = sir_read(dev, 0x68); + reg32 &= 0xffff0000; + reg32 |= 0x880a; + sir_write(dev, 0x68, reg32); + + /* Step 3: SIR 60h[3] = 1 */ + reg32 = sir_read(dev, 0x60); + reg32 |= (1 << 3); + sir_write(dev, 0x60, reg32); + + /* Step 4: SIR 60h[0] = 1 */ + reg32 = sir_read(dev, 0x60); + reg32 |= (1 << 0); + sir_write(dev, 0x60, reg32); + + /* Step 5: SIR 60h[1] = 1 */ + reg32 = sir_read(dev, 0x60); + reg32 |= (1 << 1); + sir_write(dev, 0x60, reg32); + + /* Clock Gating */ + sir_write(dev, 0x70, 0x3f00bf1f); + sir_write(dev, 0x54, 0xcf000f0f); + sir_write(dev, 0x58, 0x00190000); + RCBA32_AND_OR(0x333c, 0xffcfffff, 0x00c00000); + + reg32 = pci_read_config32(dev, 0x300); + reg32 |= (1 << 17) | (1 << 16) | (1 << 19); + reg32 |= (1 << 31) | (1 << 30) | (1 << 29); + pci_write_config32(dev, 0x300, reg32); + + reg32 = pci_read_config32(dev, 0x98); + reg32 |= 1 << 29; + pci_write_config32(dev, 0x98, reg32); + + /* Register Lock */ + reg32 = pci_read_config32(dev, 0x9c); + reg32 |= (1 << 31); + pci_write_config32(dev, 0x9c, reg32); +} + +/* + * Set SATA controller mode early so the resource allocator can + * properly assign IO/Memory resources for the controller. + */ +static void sata_enable(device_t dev) +{ + /* Get the chip configuration */ + config_t *config = dev->chip_info; + u16 map = 0x0060; + + map |= (config->sata_port_map ^ 0xf) << 8; + + pci_write_config16(dev, 0x90, map); +} + +static struct device_operations sata_ops = { + .read_resources = &pci_dev_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .init = &sata_init, + .enable = &sata_enable, + .ops_pci = &broadwell_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { + 0x9c03, 0x9c05, 0x9c07, 0x9c0f, /* LynxPoint-LP */ + 0x9c83, 0x9c85, 0x282a, 0x9c87, 0x282a, 0x9c8f, /* WildcatPoint */ + 0 +}; + +static const struct pci_driver pch_sata __pci_driver = { + .ops = &sata_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/soc/intel/skylake/serialio.c b/src/soc/intel/skylake/serialio.c new file mode 100644 index 0000000..6eba7ac --- /dev/null +++ b/src/soc/intel/skylake/serialio.c @@ -0,0 +1,318 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <cbmem.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pciexp.h> +#include <device/pci_ids.h> +#include <stdlib.h> +#include <soc/iobp.h> +#include <soc/nvs.h> +#include <soc/pci_devs.h> +#include <soc/pch.h> +#include <soc/ramstage.h> +#include <soc/rcba.h> +#include <soc/serialio.h> +#include <soc/intel/broadwell/chip.h> + +/* Set D3Hot Power State in ACPI mode */ +static void serialio_enable_d3hot(struct resource *res) +{ + u32 reg32 = read32(res2mmio(res, PCH_PCS, 0)); + reg32 |= PCH_PCS_PS_D3HOT; + write32(res2mmio(res, PCH_PCS, 0), reg32); +} + +static int serialio_uart_is_debug(struct device *dev) +{ +#if CONFIG_INTEL_PCH_UART_CONSOLE + switch (dev->path.pci.devfn) { + case PCH_DEVFN_UART0: /* UART0 */ + return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 0); + case PCH_DEVFN_UART1: /* UART1 */ + return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 1); + } +#endif + return 0; +} + +/* Enable clock in PCI mode */ +static void serialio_enable_clock(struct resource *bar0) +{ + u32 reg32 = read32(res2mmio(bar0, SIO_REG_PPR_CLOCK, 0)); + reg32 |= SIO_REG_PPR_CLOCK_EN; + write32(res2mmio(bar0, SIO_REG_PPR_CLOCK, 0), reg32); +} + +/* Put Serial IO D21:F0-F6 device into desired mode. */ +static void serialio_d21_mode(int sio_index, int int_pin, int acpi_mode) +{ + u32 portctrl = SIO_IOBP_PORTCTRL_PM_CAP_PRSNT; + + /* Snoop select 1. */ + portctrl |= SIO_IOBP_PORTCTRL_SNOOP_SELECT(1); + + /* Set interrupt pin. */ + portctrl |= SIO_IOBP_PORTCTRL_INT_PIN(int_pin); + + if (acpi_mode) { + /* Enable ACPI interrupt mode. */ + portctrl |= SIO_IOBP_PORTCTRL_ACPI_IRQ_EN; + + /* Disable PCI config space. */ + portctrl |= SIO_IOBP_PORTCTRL_PCI_CONF_DIS; + } + + pch_iobp_update(SIO_IOBP_PORTCTRLX(sio_index), 0, portctrl); +} + +/* Put Serial IO D23:F0 device into desired mode. */ +static void serialio_d23_mode(int acpi_mode) +{ + u32 portctrl = 0; + + /* Snoop select 1. */ + pch_iobp_update(SIO_IOBP_PORTCTRL1, 0, + SIO_IOBP_PORTCTRL1_SNOOP_SELECT(1)); + + if (acpi_mode) { + /* Enable ACPI interrupt mode. */ + portctrl |= SIO_IOBP_PORTCTRL0_ACPI_IRQ_EN; + + /* Disable PCI config space. */ + portctrl |= SIO_IOBP_PORTCTRL0_PCI_CONF_DIS; + } + + pch_iobp_update(SIO_IOBP_PORTCTRL0, 0, portctrl); +} + +/* Enable LTR Auto Mode for D21:F1-F6. */ +static void serialio_d21_ltr(struct resource *bar0) +{ + u32 reg; + + /* 1. Program BAR0 + 808h[2] = 0b */ + reg = read32(res2mmio(bar0, SIO_REG_PPR_GEN, 0)); + reg &= ~SIO_REG_PPR_GEN_LTR_MODE_MASK; + write32(res2mmio(bar0, SIO_REG_PPR_GEN, 0), reg); + + /* 2. Program BAR0 + 804h[1:0] = 00b */ + reg = read32(res2mmio(bar0, SIO_REG_PPR_RST, 0)); + reg &= ~SIO_REG_PPR_RST_ASSERT; + write32(res2mmio(bar0, SIO_REG_PPR_RST, 0), reg); + + /* 3. Program BAR0 + 804h[1:0] = 11b */ + reg = read32(res2mmio(bar0, SIO_REG_PPR_RST, 0)); + reg |= SIO_REG_PPR_RST_ASSERT; + write32(res2mmio(bar0, SIO_REG_PPR_RST, 0), reg); + + /* 4. Program BAR0 + 814h[31:0] = 00000000h */ + write32(res2mmio(bar0, SIO_REG_AUTO_LTR, 0), 0); +} + +/* Enable LTR Auto Mode for D23:F0. */ +static void serialio_d23_ltr(struct resource *bar0) +{ + u32 reg; + + /* Program BAR0 + 1008h[2] = 1b */ + reg = read32(res2mmio(bar0, SIO_REG_SDIO_PPR_GEN, 0)); + reg |= SIO_REG_PPR_GEN_LTR_MODE_MASK; + write32(res2mmio(bar0, SIO_REG_SDIO_PPR_GEN, 0), reg); + + /* Program BAR0 + 1010h = 0x00000000 */ + write32(res2mmio(bar0, SIO_REG_SDIO_PPR_SW_LTR, 0), 0); + + /* Program BAR0 + 3Ch[30] = 1b */ + reg = read32(res2mmio(bar0, SIO_REG_SDIO_PPR_CMD12, 0)); + reg |= SIO_REG_SDIO_PPR_CMD12_B30; + write32(res2mmio(bar0, SIO_REG_SDIO_PPR_CMD12, 0), reg); +} + +/* Select I2C voltage of 1.8V or 3.3V. */ +static void serialio_i2c_voltage_sel(struct resource *bar0, u8 voltage) +{ + u32 reg32 = read32(res2mmio(bar0, SIO_REG_PPR_GEN, 0)); + reg32 &= ~SIO_REG_PPR_GEN_VOLTAGE_MASK; + reg32 |= SIO_REG_PPR_GEN_VOLTAGE(voltage); + write32(res2mmio(bar0, SIO_REG_PPR_GEN, 0), reg32); +} + +/* Init sequence to be run once, done as part of D21:F0 (SDMA) init. */ +static void serialio_init_once(int acpi_mode) +{ + if (acpi_mode) { + /* Enable ACPI IRQ for IRQ13, IRQ7, IRQ6, IRQ5 in RCBA. */ + RCBA32_OR(ACPIIRQEN, (1 << 13)|(1 << 7)|(1 << 6)|(1 << 5)); + } + + /* Program IOBP CB000154h[12,9:8,4:0] = 1001100011111b. */ + pch_iobp_update(SIO_IOBP_GPIODF, ~0x0000131f, 0x0000131f); + + /* Program IOBP CB000180h[5:0] = 111111b (undefined register) */ + pch_iobp_update(0xcb000180, ~0x0000003f, 0x0000003f); +} + +static void serialio_init(struct device *dev) +{ + config_t *config = dev->chip_info; + struct resource *bar0, *bar1; + int sio_index = -1; + u32 reg32; + + printk(BIOS_DEBUG, "Initializing Serial IO device\n"); + + /* Ensure memory and bus master are enabled */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Find BAR0 and BAR1 */ + bar0 = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!bar0) + return; + bar1 = find_resource(dev, PCI_BASE_ADDRESS_1); + if (!bar1) + return; + + if (!config->sio_acpi_mode) + serialio_enable_clock(bar0); + + switch (dev->path.pci.devfn) { + case PCH_DEVFN_SDMA: /* SDMA */ + sio_index = SIO_ID_SDMA; + serialio_init_once(config->sio_acpi_mode); + serialio_d21_mode(sio_index, SIO_PIN_INTB, + config->sio_acpi_mode); + break; + case PCH_DEVFN_I2C0: /* I2C0 */ + sio_index = SIO_ID_I2C0; + serialio_d21_ltr(bar0); + serialio_i2c_voltage_sel(bar0, config->sio_i2c0_voltage); + serialio_d21_mode(sio_index, SIO_PIN_INTC, + config->sio_acpi_mode); + break; + case PCH_DEVFN_I2C1: /* I2C1 */ + sio_index = SIO_ID_I2C1; + serialio_d21_ltr(bar0); + serialio_i2c_voltage_sel(bar0, config->sio_i2c1_voltage); + serialio_d21_mode(sio_index, SIO_PIN_INTC, + config->sio_acpi_mode); + break; + case PCH_DEVFN_SPI0: /* SPI0 */ + sio_index = SIO_ID_SPI0; + serialio_d21_ltr(bar0); + serialio_d21_mode(sio_index, SIO_PIN_INTC, + config->sio_acpi_mode); + break; + case PCH_DEVFN_SPI1: /* SPI1 */ + sio_index = SIO_ID_SPI1; + serialio_d21_ltr(bar0); + serialio_d21_mode(sio_index, SIO_PIN_INTC, + config->sio_acpi_mode); + break; + case PCH_DEVFN_UART0: /* UART0 */ + sio_index = SIO_ID_UART0; + if (!serialio_uart_is_debug(dev)) + serialio_d21_ltr(bar0); + serialio_d21_mode(sio_index, SIO_PIN_INTD, + config->sio_acpi_mode); + break; + case PCH_DEVFN_UART1: /* UART1 */ + sio_index = SIO_ID_UART1; + if (!serialio_uart_is_debug(dev)) + serialio_d21_ltr(bar0); + serialio_d21_mode(sio_index, SIO_PIN_INTD, + config->sio_acpi_mode); + break; + case PCH_DEVFN_SDIO: /* SDIO */ + sio_index = SIO_ID_SDIO; + serialio_d23_ltr(bar0); + serialio_d23_mode(config->sio_acpi_mode); + break; + default: + return; + } + + if (config->sio_acpi_mode) { + global_nvs_t *gnvs; + + /* Find ACPI NVS to update BARs */ + gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS); + if (!gnvs) { + printk(BIOS_ERR, "Unable to locate Global NVS\n"); + return; + } + + /* Save BAR0 and BAR1 to ACPI NVS */ + gnvs->dev.bar0[sio_index] = (u32)bar0->base; + gnvs->dev.bar1[sio_index] = (u32)bar1->base; + + /* Do not enable UART if it is used as debug port */ + if (!serialio_uart_is_debug(dev)) + gnvs->dev.enable[sio_index] = 1; + + /* Put device in D3hot state via BAR1 */ + if (dev->path.pci.devfn != PCH_DEVFN_SDMA) + serialio_enable_d3hot(bar1); /* all but SDMA */ + } +} + +static void serialio_set_resources(struct device *dev) +{ + pci_dev_set_resources(dev); + +#if CONFIG_INTEL_PCH_UART_CONSOLE + /* Update UART base address if used for debug */ + if (serialio_uart_is_debug(dev)) { + struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) + uartmem_setbaseaddr(res->base); + } +#endif +} + +static struct device_operations device_ops = { + .read_resources = &pci_dev_read_resources, + .set_resources = &serialio_set_resources, + .enable_resources = &pci_dev_enable_resources, + .init = &serialio_init, + .ops_pci = &broadwell_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { + 0x9c60, 0x9ce0, /* 0:15.0 - SDMA */ + 0x9c61, 0x9ce1, /* 0:15.1 - I2C0 */ + 0x9c62, 0x9ce2, /* 0:15.2 - I2C1 */ + 0x9c65, 0x9ce5, /* 0:15.3 - SPI0 */ + 0x9c66, 0x9ce6, /* 0:15.4 - SPI1 */ + 0x9c63, 0x9ce3, /* 0:15.5 - UART0 */ + 0x9c64, 0x9ce4, /* 0:15.6 - UART1 */ + 0x9c35, 0x9cb5, /* 0:17.0 - SDIO */ + 0 +}; + +static const struct pci_driver pch_pcie __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/soc/intel/skylake/smbus.c b/src/soc/intel/skylake/smbus.c new file mode 100644 index 0000000..0ec84b2 --- /dev/null +++ b/src/soc/intel/skylake/smbus.c @@ -0,0 +1,113 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/path.h> +#include <device/smbus.h> +#include <device/smbus_def.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <soc/iomap.h> +#include <soc/ramstage.h> +#include <soc/smbus.h> + +static void pch_smbus_init(device_t dev) +{ + struct resource *res; + u16 reg16; + + /* Enable clock gating */ + reg16 = pci_read_config32(dev, 0x80); + reg16 &= ~((1 << 8)|(1 << 10)|(1 << 12)|(1 << 14)); + pci_write_config32(dev, 0x80, reg16); + + /* Set Receive Slave Address */ + res = find_resource(dev, PCI_BASE_ADDRESS_4); + if (res) + outb(SMBUS_SLAVE_ADDR, res->base + SMB_RCV_SLVA); +} + +static int lsmbus_read_byte(device_t dev, u8 address) +{ + u16 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + res = find_resource(pbus->dev, PCI_BASE_ADDRESS_4); + + return do_smbus_read_byte(res->base, device, address); +} + +static int lsmbus_write_byte(device_t dev, u8 address, u8 data) +{ + u16 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + res = find_resource(pbus->dev, PCI_BASE_ADDRESS_4); + return do_smbus_write_byte(res->base, device, address, data); +} + +static struct smbus_bus_operations lops_smbus_bus = { + .read_byte = lsmbus_read_byte, + .write_byte = lsmbus_write_byte, +}; + +static void smbus_read_resources(device_t dev) +{ + struct resource *res = new_resource(dev, PCI_BASE_ADDRESS_4); + res->base = SMBUS_BASE_ADDRESS; + res->size = 32; + res->limit = res->base + res->size - 1; + res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_RESERVE | + IORESOURCE_STORED | IORESOURCE_ASSIGNED; + + /* Also add MMIO resource */ + res = pci_get_resource(dev, PCI_BASE_ADDRESS_0); +} + +static struct device_operations smbus_ops = { + .read_resources = &smbus_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .scan_bus = &scan_static_bus, + .init = &pch_smbus_init, + .ops_smbus_bus = &lops_smbus_bus, + .ops_pci = &broadwell_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { + 0x9c22, /* LynxPoint */ + 0x9ca2, /* WildcatPoint */ + 0 +}; + +static const struct pci_driver pch_smbus __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; diff --git a/src/soc/intel/skylake/smbus_common.c b/src/soc/intel/skylake/smbus_common.c new file mode 100644 index 0000000..41416c7 --- /dev/null +++ b/src/soc/intel/skylake/smbus_common.c @@ -0,0 +1,155 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Yinghai Lu <yinghailu(a)gmail.com> + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/path.h> +#include <device/smbus_def.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <soc/ramstage.h> +#include <soc/smbus.h> + +static void smbus_delay(void) +{ + inb(0x80); +} + +static int smbus_wait_until_ready(u16 smbus_base) +{ + unsigned loops = SMBUS_TIMEOUT; + unsigned char byte; + do { + smbus_delay(); + if (--loops == 0) + break; + byte = inb(smbus_base + SMBHSTSTAT); + } while (byte & 1); + return loops ? 0 : -1; +} + +static int smbus_wait_until_done(u16 smbus_base) +{ + unsigned loops = SMBUS_TIMEOUT; + unsigned char byte; + do { + smbus_delay(); + if (--loops == 0) + break; + byte = inb(smbus_base + SMBHSTSTAT); + } while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0); + return loops ? 0 : -1; +} + +int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address) +{ + unsigned char global_status_register; + unsigned char byte; + + if (smbus_wait_until_ready(smbus_base) < 0) { + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + } + /* Setup transaction */ + /* Disable interrupts */ + outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL); + /* Set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD); + /* Set the command/address... */ + outb(address & 0xff, smbus_base + SMBHSTCMD); + /* Set up for a byte data read */ + outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2), + (smbus_base + SMBHSTCTL)); + /* Clear any lingering errors, so the transaction will run */ + outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + + /* Clear the data byte... */ + outb(0, smbus_base + SMBHSTDAT0); + + /* Start the command */ + outb((inb(smbus_base + SMBHSTCTL) | 0x40), + smbus_base + SMBHSTCTL); + + /* Poll for transaction completion */ + if (smbus_wait_until_done(smbus_base) < 0) { + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + } + + global_status_register = inb(smbus_base + SMBHSTSTAT); + + /* Ignore the "In Use" status... */ + global_status_register &= ~(3 << 5); + + /* Read results of transaction */ + byte = inb(smbus_base + SMBHSTDAT0); + if (global_status_register != (1 << 1)) { + return SMBUS_ERROR; + } + return byte; +} + +int do_smbus_write_byte(unsigned smbus_base, unsigned device, + unsigned address, unsigned data) +{ + unsigned char global_status_register; + + if (smbus_wait_until_ready(smbus_base) < 0) + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + + /* Setup transaction */ + /* Disable interrupts */ + outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL); + /* Set the device I'm talking too */ + outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD); + /* Set the command/address... */ + outb(address & 0xff, smbus_base + SMBHSTCMD); + /* Set up for a byte data read */ + outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2), + (smbus_base + SMBHSTCTL)); + /* Clear any lingering errors, so the transaction will run */ + outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + + /* Clear the data byte... */ + outb(data, smbus_base + SMBHSTDAT0); + + /* Start the command */ + outb((inb(smbus_base + SMBHSTCTL) | 0x40), + smbus_base + SMBHSTCTL); + + /* Poll for transaction completion */ + if (smbus_wait_until_done(smbus_base) < 0) { + printk(BIOS_ERR, "SMBUS transaction timeout\n"); + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + } + + global_status_register = inb(smbus_base + SMBHSTSTAT); + + /* Ignore the "In Use" status... */ + global_status_register &= ~(3 << 5); + + /* Read results of transaction */ + if (global_status_register != (1 << 1)) { + printk(BIOS_ERR, "SMBUS transaction error\n"); + return SMBUS_ERROR; + } + + return 0; +} diff --git a/src/soc/intel/skylake/smi.c b/src/soc/intel/skylake/smi.c new file mode 100644 index 0000000..85a508b --- /dev/null +++ b/src/soc/intel/skylake/smi.c @@ -0,0 +1,123 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include <device/pci.h> +#include <console/console.h> +#include <arch/io.h> +#include <cpu/cpu.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/smm.h> +#include <string.h> +#include <soc/iomap.h> +#include <soc/pch.h> +#include <soc/pm.h> +#include <soc/smm.h> + +void southbridge_smm_clear_state(void) +{ + u32 smi_en; + + printk(BIOS_DEBUG, "Initializing Southbridge SMI..."); + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", ACPI_BASE_ADDRESS); + + smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN); + if (smi_en & APMC_EN) { + printk(BIOS_INFO, "SMI# handler already enabled?\n"); + return; + } + + printk(BIOS_DEBUG, "\n"); + + /* Dump and clear status registers */ + clear_smi_status(); + clear_pm1_status(); + clear_tco_status(); + clear_gpe_status(); +} + +void southbridge_smm_enable_smi(void) +{ + printk(BIOS_DEBUG, "Enabling SMIs.\n"); + /* Configure events */ + enable_pm1(PWRBTN_EN | GBL_EN); + disable_gpe(PME_B0_EN); + + /* Enable SMI generation: + * - on APMC writes (io 0xb2) + * - on writes to SLP_EN (sleep states) + * - on writes to GBL_RLS (bios commands) + * No SMIs: + * - on microcontroller writes (io 0x62/0x66) + * - on TCO events + */ + enable_smi(APMC_EN | SLP_SMI_EN | GBL_SMI_EN | EOS); +} + +void southbridge_trigger_smi(void) +{ + /** + * There are several methods of raising a controlled SMI# via + * software, among them: + * - Writes to io 0xb2 (APMC) + * - Writes to the Local Apic ICR with Delivery mode SMI. + * + * Using the local apic is a bit more tricky. According to + * AMD Family 11 Processor BKDG no destination shorthand must be + * used. + * The whole SMM initialization is quite a bit hardware specific, so + * I'm not too worried about the better of the methods at the moment + */ + + /* raise an SMI interrupt */ + printk(BIOS_SPEW, " ... raise SMI#\n"); + outb(0x00, 0xb2); +} + +void southbridge_clear_smi_status(void) +{ + /* Clear SMI status */ + clear_smi_status(); + + /* Clear PM1 status */ + clear_pm1_status(); + + /* Set EOS bit so other SMIs can occur. */ + enable_smi(EOS); +} + +void smm_setup_structures(void *gnvs, void *tcg, void *smi1) +{ + /* + * Issue SMI to set the gnvs pointer in SMM. + * tcg and smi1 are unused. + * + * EAX = APM_CNT_GNVS_UPDATE + * EBX = gnvs pointer + * EDX = APM_CNT + */ + asm volatile ( + "outb %%al, %%dx\n\t" + : /* ignore result */ + : "a" (APM_CNT_GNVS_UPDATE), + "b" ((u32)gnvs), + "d" (APM_CNT) + ); +} diff --git a/src/soc/intel/skylake/smihandler.c b/src/soc/intel/skylake/smihandler.c new file mode 100644 index 0000000..63c9373 --- /dev/null +++ b/src/soc/intel/skylake/smihandler.c @@ -0,0 +1,591 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <delay.h> +#include <types.h> +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/cache.h> +#include <device/pci_def.h> +#include <cpu/x86/smm.h> +#include <spi-generic.h> +#include <elog.h> +#include <halt.h> +#include <pc80/mc146818rtc.h> +#include <soc/lpc.h> +#include <soc/nvs.h> +#include <soc/pci_devs.h> +#include <soc/pm.h> +#include <soc/rcba.h> +#include <soc/smm.h> +#include <soc/xhci.h> +#include <drivers/intel/gma/i915_reg.h> + +static u8 smm_initialized = 0; + +/* + * GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located + * by coreboot. + */ +static global_nvs_t *gnvs; +global_nvs_t *smm_get_gnvs(void) +{ + return gnvs; +} + +int southbridge_io_trap_handler(int smif) +{ + switch (smif) { + case 0x32: + printk(BIOS_DEBUG, "OS Init\n"); + /* gnvs->smif: + * On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + */ + gnvs->smif = 0; + return 1; /* IO trap handled */ + } + + /* Not handled */ + return 0; +} + +/** + * @brief Set the EOS bit + */ +void southbridge_smi_set_eos(void) +{ + enable_smi(EOS); +} + +static void busmaster_disable_on_bus(int bus) +{ + int slot, func; + unsigned int val; + unsigned char hdr; + + for (slot = 0; slot < 0x20; slot++) { + for (func = 0; func < 8; func++) { + u32 reg32; + device_t dev = PCI_DEV(bus, slot, func); + + val = pci_read_config32(dev, PCI_VENDOR_ID); + + if (val == 0xffffffff || val == 0x00000000 || + val == 0x0000ffff || val == 0xffff0000) + continue; + + /* Disable Bus Mastering for this one device */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 &= ~PCI_COMMAND_MASTER; + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* If this is a bridge, then follow it. */ + hdr = pci_read_config8(dev, PCI_HEADER_TYPE); + hdr &= 0x7f; + if (hdr == PCI_HEADER_TYPE_BRIDGE || + hdr == PCI_HEADER_TYPE_CARDBUS) { + unsigned int buses; + buses = pci_read_config32(dev, PCI_PRIMARY_BUS); + busmaster_disable_on_bus((buses >> 8) & 0xff); + } + } + } +} + +/* + * Turn off the backlight if it is on, and wait for the specified + * backlight off delay. This will allow panel power timings to meet + * spec and prevent brief garbage on the screen when turned off + * during firmware with power button triggered SMI. + */ +static void backlight_off(void) +{ + void *reg_base; + uint32_t pp_ctrl; + uint32_t bl_off_delay; + + reg_base = (void *)((uintptr_t)pci_read_config32(SA_DEV_IGD, PCI_BASE_ADDRESS_0) & ~0xf); + + /* Check if backlight is enabled */ + pp_ctrl = read32(reg_base + PCH_PP_CONTROL); + if (!(pp_ctrl & EDP_BLC_ENABLE)) + return; + + /* Enable writes to this register */ + pp_ctrl &= ~PANEL_UNLOCK_MASK; + pp_ctrl |= PANEL_UNLOCK_REGS; + + /* Turn off backlight */ + pp_ctrl &= ~EDP_BLC_ENABLE; + + write32(reg_base + PCH_PP_CONTROL, pp_ctrl); + read32(reg_base + PCH_PP_CONTROL); + + /* Read backlight off delay in 100us units */ + bl_off_delay = read32(reg_base + PCH_PP_OFF_DELAYS); + bl_off_delay &= PANEL_LIGHT_OFF_DELAY_MASK; + bl_off_delay *= 100; + + /* Wait for backlight to turn off */ + udelay(bl_off_delay); + + printk(BIOS_INFO, "Backlight turned off\n"); +} + +static void southbridge_smi_sleep(void) +{ + u8 reg8; + u32 reg32; + u8 slp_typ; + u8 s5pwr = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; + + /* save and recover RTC port values */ + u8 tmp70, tmp72; + tmp70 = inb(0x70); + tmp72 = inb(0x72); + get_option(&s5pwr, "power_on_after_fail"); + outb(tmp70, 0x70); + outb(tmp72, 0x72); + + /* First, disable further SMIs */ + disable_smi(SLP_SMI_EN); + + /* Figure out SLP_TYP */ + reg32 = inl(ACPI_BASE_ADDRESS + PM1_CNT); + printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32); + slp_typ = (reg32 >> 10) & 7; + + /* Do any mainboard sleep handling */ + mainboard_smi_sleep(slp_typ-2); + + /* USB sleep preparations */ + usb_xhci_sleep_prepare(PCH_DEV_XHCI, slp_typ); + +#if CONFIG_ELOG_GSMI + /* Log S3, S4, and S5 entry */ + if (slp_typ >= 5) + elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ-2); +#endif + + /* Clear pending GPE events */ + clear_gpe_status(); + + /* Next, do the deed. + */ + + switch (slp_typ) { + case SLP_TYP_S0: + printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); + break; + case SLP_TYP_S1: + printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); + break; + case SLP_TYP_S3: + printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n"); + + /* Invalidate the cache before going to S3 */ + wbinvd(); + break; + case SLP_TYP_S4: + printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); + break; + case SLP_TYP_S5: + printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); + + /* Turn off backlight if needed */ + backlight_off(); + + /* Disable all GPE */ + disable_all_gpe(); + + /* Always set the flag in case CMOS was changed on runtime. For + * "KEEP", switch to "OFF" - KEEP is software emulated + */ + reg8 = pci_read_config8(PCH_DEV_LPC, GEN_PMCON_3); + if (s5pwr == MAINBOARD_POWER_ON) + reg8 &= ~1; + else + reg8 |= 1; + pci_write_config8(PCH_DEV_LPC, GEN_PMCON_3, reg8); + + /* also iterates over all bridges on bus 0 */ + busmaster_disable_on_bus(0); + break; + default: + printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); + break; + } + + /* + * Write back to the SLP register to cause the originally intended + * event again. We need to set BIT13 (SLP_EN) though to make the + * sleep happen. + */ + enable_pm1_control(SLP_EN); + + /* Make sure to stop executing code here for S3/S4/S5 */ + if (slp_typ > 1) + halt(); + + /* + * In most sleep states, the code flow of this function ends at + * the line above. However, if we entered sleep state S1 and wake + * up again, we will continue to execute code in this function. + */ + reg32 = inl(ACPI_BASE_ADDRESS + PM1_CNT); + if (reg32 & SCI_EN) { + /* The OS is not an ACPI OS, so we set the state to S0 */ + disable_pm1_control(SLP_EN | SLP_TYP); + } +} + +/* + * Look for Synchronous IO SMI and use save state from that + * core in case we are not running on the same core that + * initiated the IO transaction. + */ +static em64t101_smm_state_save_area_t *smi_apmc_find_state_save(u8 cmd) +{ + em64t101_smm_state_save_area_t *state; + int node; + + /* Check all nodes looking for the one that issued the IO */ + for (node = 0; node < CONFIG_MAX_CPUS; node++) { + state = smm_get_save_state(node); + + /* Check for Synchronous IO (bit0==1) */ + if (!(state->io_misc_info & (1 << 0))) + continue; + + /* Make sure it was a write (bit4==0) */ + if (state->io_misc_info & (1 << 4)) + continue; + + /* Check for APMC IO port */ + if (((state->io_misc_info >> 16) & 0xff) != APM_CNT) + continue; + + /* Check AX against the requested command */ + if ((state->rax & 0xff) != cmd) + continue; + + return state; + } + + return NULL; +} + +#if CONFIG_ELOG_GSMI +static void southbridge_smi_gsmi(void) +{ + u32 *ret, *param; + u8 sub_command; + em64t101_smm_state_save_area_t *io_smi = + smi_apmc_find_state_save(ELOG_GSMI_APM_CNT); + + if (!io_smi) + return; + + /* Command and return value in EAX */ + ret = (u32*)&io_smi->rax; + sub_command = (u8)(*ret >> 8); + + /* Parameter buffer in EBX */ + param = (u32*)&io_smi->rbx; + + /* drivers/elog/gsmi.c */ + *ret = gsmi_exec(sub_command, param); +} +#endif + +static void finalize(void) +{ + static int finalize_done; + + if (finalize_done) { + printk(BIOS_DEBUG, "SMM already finalized.\n"); + return; + } + finalize_done = 1; + +#if CONFIG_SPI_FLASH_SMM + /* Re-init SPI driver to handle locked BAR */ + spi_init(); +#endif +} + +static void southbridge_smi_apmc(void) +{ + u8 reg8; + em64t101_smm_state_save_area_t *state; + + /* Emulate B2 register as the FADT / Linux expects it */ + + reg8 = inb(APM_CNT); + switch (reg8) { + case APM_CNT_CST_CONTROL: + printk(BIOS_DEBUG, "C-state control\n"); + break; + case APM_CNT_PST_CONTROL: + printk(BIOS_DEBUG, "P-state control\n"); + break; + case APM_CNT_ACPI_DISABLE: + disable_pm1_control(SCI_EN); + printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n"); + break; + case APM_CNT_ACPI_ENABLE: + enable_pm1_control(SCI_EN); + printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n"); + break; + case APM_CNT_FINALIZE: + finalize(); + break; + case APM_CNT_GNVS_UPDATE: + if (smm_initialized) { + printk(BIOS_DEBUG, + "SMI#: SMM structures already initialized!\n"); + return; + } + state = smi_apmc_find_state_save(reg8); + if (state) { + /* EBX in the state save contains the GNVS pointer */ + gnvs = (global_nvs_t *)((u32)state->rbx); + smm_initialized = 1; + printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs); + } + break; +#if CONFIG_ELOG_GSMI + case ELOG_GSMI_APM_CNT: + southbridge_smi_gsmi(); + break; +#endif + } + + mainboard_smi_apmc(reg8); +} + +static void southbridge_smi_pm1(void) +{ + u16 pm1_sts = clear_pm1_status(); + + /* While OSPM is not active, poweroff immediately + * on a power button event. + */ + if (pm1_sts & PWRBTN_STS) { + /* power button pressed */ +#if CONFIG_ELOG_GSMI + elog_add_event(ELOG_TYPE_POWER_BUTTON); +#endif + disable_pm1_control(-1UL); + enable_pm1_control(SLP_EN | (SLP_TYP_S5 << 10)); + } +} + +static void southbridge_smi_gpe0(void) +{ + clear_gpe_status(); +} + +static void southbridge_smi_gpi(void) +{ + mainboard_smi_gpi(clear_alt_smi_status()); + + /* Clear again after mainboard handler */ + clear_alt_smi_status(); +} + +static void southbridge_smi_mc(void) +{ + u32 reg32 = inl(ACPI_BASE_ADDRESS + SMI_EN); + + /* Are microcontroller SMIs enabled? */ + if ((reg32 & MCSMI_EN) == 0) + return; + + printk(BIOS_DEBUG, "Microcontroller SMI.\n"); +} + +static void southbridge_smi_tco(void) +{ + u32 tco_sts = clear_tco_status(); + + /* Any TCO event? */ + if (!tco_sts) + return; + + if (tco_sts & (1 << 8)) { // BIOSWR + u8 bios_cntl = pci_read_config16(PCH_DEV_LPC, BIOS_CNTL); + + if (bios_cntl & 1) { + /* + * BWE is RW, so the SMI was caused by a + * write to BWE, not by a write to the BIOS + * + * This is the place where we notice someone + * is trying to tinker with the BIOS. We are + * trying to be nice and just ignore it. A more + * resolute answer would be to power down the + * box. + */ + printk(BIOS_DEBUG, "Switching back to RO\n"); + pci_write_config32(PCH_DEV_LPC, BIOS_CNTL, + (bios_cntl & ~1)); + } /* No else for now? */ + } else if (tco_sts & (1 << 3)) { /* TIMEOUT */ + /* Handle TCO timeout */ + printk(BIOS_DEBUG, "TCO Timeout.\n"); + } +} + +static void southbridge_smi_periodic(void) +{ + u32 reg32 = inl(ACPI_BASE_ADDRESS + SMI_EN); + + /* Are periodic SMIs enabled? */ + if ((reg32 & PERIODIC_EN) == 0) + return; + + printk(BIOS_DEBUG, "Periodic SMI.\n"); +} + +static void southbridge_smi_monitor(void) +{ +#define IOTRAP(x) (trap_sts & (1 << x)) + u32 trap_sts, trap_cycle; + u32 data, mask = 0; + int i; + + trap_sts = RCBA32(0x1e00); // TRSR - Trap Status Register + RCBA32(0x1e00) = trap_sts; // Clear trap(s) in TRSR + + trap_cycle = RCBA32(0x1e10); + for (i=16; i<20; i++) { + if (trap_cycle & (1 << i)) + mask |= (0xff << ((i - 16) << 2)); + } + + + /* IOTRAP(3) SMI function call */ + if (IOTRAP(3)) { + if (gnvs && gnvs->smif) + io_trap_handler(gnvs->smif); // call function smif + return; + } + + /* IOTRAP(2) currently unused + * IOTRAP(1) currently unused */ + + /* IOTRAP(0) SMIC */ + if (IOTRAP(0)) { + if (!(trap_cycle & (1 << 24))) { // It's a write + printk(BIOS_DEBUG, "SMI1 command\n"); + data = RCBA32(0x1e18); + data &= mask; + // if (smi1) + // southbridge_smi_command(data); + // return; + } + // Fall through to debug + } + + printk(BIOS_DEBUG, " trapped io address = 0x%x\n", + trap_cycle & 0xfffc); + for (i=0; i < 4; i++) + if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); + printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); + printk(BIOS_DEBUG, " read/write: %s\n", + (trap_cycle & (1 << 24)) ? "read" : "write"); + + if (!(trap_cycle & (1 << 24))) { + /* Write Cycle */ + data = RCBA32(0x1e18); + printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data); + } +#undef IOTRAP +} + +typedef void (*smi_handler_t)(void); + +static smi_handler_t southbridge_smi[32] = { + NULL, // [0] reserved + NULL, // [1] reserved + NULL, // [2] BIOS_STS + NULL, // [3] LEGACY_USB_STS + southbridge_smi_sleep, // [4] SLP_SMI_STS + southbridge_smi_apmc, // [5] APM_STS + NULL, // [6] SWSMI_TMR_STS + NULL, // [7] reserved + southbridge_smi_pm1, // [8] PM1_STS + southbridge_smi_gpe0, // [9] GPE0_STS + southbridge_smi_gpi, // [10] GPI_STS + southbridge_smi_mc, // [11] MCSMI_STS + NULL, // [12] DEVMON_STS + southbridge_smi_tco, // [13] TCO_STS + southbridge_smi_periodic, // [14] PERIODIC_STS + NULL, // [15] SERIRQ_SMI_STS + NULL, // [16] SMBUS_SMI_STS + NULL, // [17] LEGACY_USB2_STS + NULL, // [18] INTEL_USB2_STS + NULL, // [19] reserved + NULL, // [20] PCI_EXP_SMI_STS + southbridge_smi_monitor, // [21] MONITOR_STS + NULL, // [22] reserved + NULL, // [23] reserved + NULL, // [24] reserved + NULL, // [25] EL_SMI_STS + NULL, // [26] SPI_STS + NULL, // [27] reserved + NULL, // [28] reserved + NULL, // [29] reserved + NULL, // [30] reserved + NULL // [31] reserved +}; + +/** + * @brief Interrupt handler for SMI# + * + * @param smm_revision revision of the smm state save map + */ + +void southbridge_smi_handler(void) +{ + int i; + u32 smi_sts; + + /* We need to clear the SMI status registers, or we won't see what's + * happening in the following calls. + */ + smi_sts = clear_smi_status(); + + /* Call SMI sub handler for each of the status bits */ + for (i = 0; i < 31; i++) { + if (smi_sts & (1 << i)) { + if (southbridge_smi[i]) { + southbridge_smi[i](); + } else { + printk(BIOS_DEBUG, + "SMI_STS[%d] occurred, but no " + "handler available.\n", i); + } + } + } +} diff --git a/src/soc/intel/skylake/smmrelocate.c b/src/soc/intel/skylake/smmrelocate.c new file mode 100644 index 0000000..47d6385 --- /dev/null +++ b/src/soc/intel/skylake/smmrelocate.c @@ -0,0 +1,439 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/pci.h> +#include <cpu/cpu.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/lapic.h> +#include <cpu/x86/mp.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/smm.h> +#include <console/console.h> +#include <soc/cpu.h> +#include <soc/msr.h> +#include <soc/pci_devs.h> +#include <soc/smm.h> +#include <soc/systemagent.h> + +/* This gets filled in and used during relocation. */ +static struct smm_relocation_params smm_reloc_params; + +static inline void write_smrr(struct smm_relocation_params *relo_params) +{ + printk(BIOS_DEBUG, "Writing SMRR. base = 0x%08x, mask=0x%08x\n", + relo_params->smrr_base.lo, relo_params->smrr_mask.lo); + wrmsr(SMRRphysBase_MSR, relo_params->smrr_base); + wrmsr(SMRRphysMask_MSR, relo_params->smrr_mask); +} + +static inline void write_emrr(struct smm_relocation_params *relo_params) +{ + printk(BIOS_DEBUG, "Writing EMRR. base = 0x%08x, mask=0x%08x\n", + relo_params->emrr_base.lo, relo_params->emrr_mask.lo); + wrmsr(EMRRphysBase_MSR, relo_params->emrr_base); + wrmsr(EMRRphysMask_MSR, relo_params->emrr_mask); +} + +static inline void write_uncore_emrr(struct smm_relocation_params *relo_params) +{ + printk(BIOS_DEBUG, + "Writing UNCORE_EMRR. base = 0x%08x, mask=0x%08x\n", + relo_params->uncore_emrr_base.lo, + relo_params->uncore_emrr_mask.lo); + wrmsr(UNCORE_EMRRphysBase_MSR, relo_params->uncore_emrr_base); + wrmsr(UNCORE_EMRRphysMask_MSR, relo_params->uncore_emrr_mask); +} + +static void update_save_state(int cpu, + struct smm_relocation_params *relo_params, + const struct smm_runtime *runtime) +{ + u32 smbase; + u32 iedbase; + + /* The relocated handler runs with all CPUs concurrently. Therefore + * stagger the entry points adjusting SMBASE downwards by save state + * size * CPU num. */ + smbase = relo_params->smram_base - cpu * runtime->save_state_size; + iedbase = relo_params->ied_base; + + printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x\n", + smbase, iedbase); + + /* All threads need to set IEDBASE and SMBASE to the relocated + * handler region. However, the save state location depends on the + * smm_save_state_in_msrs field in the relocation parameters. If + * smm_save_state_in_msrs is non-zero then the CPUs are relocating + * the SMM handler in parallel, and each CPUs save state area is + * located in their respective MSR space. If smm_save_state_in_msrs + * is zero then the SMM relocation is happening serially so the + * save state is at the same default location for all CPUs. */ + if (relo_params->smm_save_state_in_msrs) { + msr_t smbase_msr; + msr_t iedbase_msr; + + smbase_msr.lo = smbase; + smbase_msr.hi = 0; + + /* According the BWG the IEDBASE MSR is in bits 63:32. It's + * not clear why it differs from the SMBASE MSR. */ + iedbase_msr.lo = 0; + iedbase_msr.hi = iedbase; + + wrmsr(SMBASE_MSR, smbase_msr); + wrmsr(IEDBASE_MSR, iedbase_msr); + } else { + em64t101_smm_state_save_area_t *save_state; + + save_state = (void *)(runtime->smbase + SMM_DEFAULT_SIZE - + runtime->save_state_size); + + save_state->smbase = smbase; + save_state->iedbase = iedbase; + } +} + +/* Returns 1 if SMM MSR save state was set. */ +static int bsp_setup_msr_save_state(struct smm_relocation_params *relo_params) +{ + msr_t smm_mca_cap; + + smm_mca_cap = rdmsr(SMM_MCA_CAP_MSR); + if (smm_mca_cap.hi & SMM_CPU_SVRSTR_MASK) { + msr_t smm_feature_control; + + smm_feature_control = rdmsr(SMM_FEATURE_CONTROL_MSR); + smm_feature_control.hi = 0; + smm_feature_control.lo |= SMM_CPU_SAVE_EN; + wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control); + relo_params->smm_save_state_in_msrs = 1; + } + return relo_params->smm_save_state_in_msrs; +} + +/* The relocation work is actually performed in SMM context, but the code + * resides in the ramstage module. This occurs by trampolining from the default + * SMRAM entry point to here. */ +static void asmlinkage cpu_smm_do_relocation(void *arg) +{ + msr_t mtrr_cap; + struct smm_relocation_params *relo_params; + const struct smm_module_params *p; + const struct smm_runtime *runtime; + int cpu; + + p = arg; + runtime = p->runtime; + relo_params = p->arg; + cpu = p->cpu; + + if (cpu >= CONFIG_MAX_CPUS) { + printk(BIOS_CRIT, + "Invalid CPU number assigned in SMM stub: %d\n", cpu); + return; + } + + printk(BIOS_DEBUG, "In relocation handler: cpu %d\n", cpu); + + /* Determine if the processor supports saving state in MSRs. If so, + * enable it before the non-BSPs run so that SMM relocation can occur + * in parallel in the non-BSP CPUs. */ + if (cpu == 0) { + /* If smm_save_state_in_msrs is 1 then that means this is the + * 2nd time through the relocation handler for the BSP. + * Parallel SMM handler relocation is taking place. However, + * it is desired to access other CPUs save state in the real + * SMM handler. Therefore, disable the SMM save state in MSRs + * feature. */ + if (relo_params->smm_save_state_in_msrs) { + msr_t smm_feature_control; + + smm_feature_control = rdmsr(SMM_FEATURE_CONTROL_MSR); + smm_feature_control.lo &= ~SMM_CPU_SAVE_EN; + wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control); + } else if (bsp_setup_msr_save_state(relo_params)) + /* Just return from relocation handler if MSR save + * state is enabled. In that case the BSP will come + * back into the relocation handler to setup the new + * SMBASE as well disabling SMM save state in MSRs. */ + return; + } + + /* Make appropriate changes to the save state map. */ + update_save_state(cpu, relo_params, runtime); + + /* Write EMRR and SMRR MSRs based on indicated support. */ + mtrr_cap = rdmsr(MTRRcap_MSR); + if (mtrr_cap.lo & SMRR_SUPPORTED) + write_smrr(relo_params); + + if (mtrr_cap.lo & EMRR_SUPPORTED) { + write_emrr(relo_params); + /* UNCORE_EMRR msrs are package level. Therefore, only + * configure these MSRs on the BSP. */ + if (cpu == 0) + write_uncore_emrr(relo_params); + } +} + +static u32 northbridge_get_base_reg(device_t dev, int reg) +{ + u32 value; + + value = pci_read_config32(dev, reg); + /* Base registers are at 1MiB granularity. */ + value &= ~((1 << 20) - 1); + return value; +} + +static void fill_in_relocation_params(device_t dev, + struct smm_relocation_params *params) +{ + u32 tseg_size; + u32 tsegmb; + u32 bgsm; + u32 emrr_base; + u32 emrr_size; + int phys_bits; + /* All range registers are aligned to 4KiB */ + const u32 rmask = ~((1 << 12) - 1); + + /* Some of the range registers are dependent on the number of physical + * address bits supported. */ + phys_bits = cpuid_eax(0x80000008) & 0xff; + + /* The range bounded by the TSEGMB and BGSM registers encompasses the + * SMRAM range as well as the IED range. However, the SMRAM available + * to the handler is 4MiB since the IEDRAM lives TSEGMB + 4MiB. + */ + tsegmb = northbridge_get_base_reg(dev, TSEG); + bgsm = northbridge_get_base_reg(dev, BGSM); + tseg_size = bgsm - tsegmb; + + params->smram_base = tsegmb; + params->smram_size = 4 << 20; + params->ied_base = tsegmb + params->smram_size; + params->ied_size = tseg_size - params->smram_size; + + /* Adjust available SMM handler memory size. */ + params->smram_size -= CONFIG_SMM_RESERVED_SIZE; + + /* SMRR has 32-bits of valid address aligned to 4KiB. */ + params->smrr_base.lo = (params->smram_base & rmask) | MTRR_TYPE_WRBACK; + params->smrr_base.hi = 0; + params->smrr_mask.lo = (~(tseg_size - 1) & rmask) | MTRRphysMaskValid; + params->smrr_mask.hi = 0; + + /* The EMRR and UNCORE_EMRR are at IEDBASE + 2MiB */ + emrr_base = (params->ied_base + (2 << 20)) & rmask; + emrr_size = params->ied_size - (2 << 20); + + /* EMRR has 46 bits of valid address aligned to 4KiB. It's dependent + * on the number of physical address bits supported. */ + params->emrr_base.lo = emrr_base | MTRR_TYPE_WRBACK; + params->emrr_base.hi = 0; + params->emrr_mask.lo = (~(emrr_size - 1) & rmask) | MTRRphysMaskValid; + params->emrr_mask.hi = (1 << (phys_bits - 32)) - 1; + + /* UNCORE_EMRR has 39 bits of valid address aligned to 4KiB. */ + params->uncore_emrr_base.lo = emrr_base; + params->uncore_emrr_base.hi = 0; + params->uncore_emrr_mask.lo = (~(emrr_size - 1) & rmask) | + MTRRphysMaskValid; + params->uncore_emrr_mask.hi = (1 << (39 - 32)) - 1; +} + +static void adjust_apic_id_map(struct smm_loader_params *smm_params) +{ + struct smm_runtime *runtime; + int i; + + /* Adjust the APIC id map if HT is disabled. */ + if (!ht_disabled) + return; + + runtime = smm_params->runtime; + + /* The APIC ids increment by 2 when HT is disabled. */ + for (i = 0; i < CONFIG_MAX_CPUS; i++) + runtime->apic_id_to_cpu[i] = runtime->apic_id_to_cpu[i] * 2; +} + +static int install_relocation_handler(int num_cpus, + struct smm_relocation_params *relo_params) +{ + /* The default SMM entry can happen in parallel or serially. If the + * default SMM entry is done in parallel the BSP has already setup + * the saving state to each CPU's MSRs. At least one save state size + * is required for the initial SMM entry for the BSP to determine if + * parallel SMM relocation is even feasible. Set the stack size to + * the save state size, and call into the do_relocation handler. */ + int save_state_size = sizeof(em64t101_smm_state_save_area_t); + struct smm_loader_params smm_params = { + .per_cpu_stack_size = save_state_size, + .num_concurrent_stacks = num_cpus, + .per_cpu_save_state_size = save_state_size, + .num_concurrent_save_states = 1, + .handler = (smm_handler_t)&cpu_smm_do_relocation, + .handler_arg = (void *)relo_params, + }; + + if (smm_setup_relocation_handler(&smm_params)) + return -1; + + adjust_apic_id_map(&smm_params); + + return 0; +} + +static void setup_ied_area(struct smm_relocation_params *params) +{ + char *ied_base; + + struct ied_header ied = { + .signature = "INTEL RSVD", + .size = params->ied_size, + .reserved = {0}, + }; + + ied_base = (void *)params->ied_base; + + /* Place IED header at IEDBASE. */ + memcpy(ied_base, &ied, sizeof(ied)); + + /* Zero out 32KiB at IEDBASE + 1MiB */ + memset(ied_base + (1 << 20), 0, (32 << 10)); +} + +static int install_permanent_handler(int num_cpus, + struct smm_relocation_params *relo_params) +{ + /* There are num_cpus concurrent stacks and num_cpus concurrent save + * state areas. Lastly, set the stack size to the save state size. */ + int save_state_size = sizeof(em64t101_smm_state_save_area_t); + struct smm_loader_params smm_params = { + .per_cpu_stack_size = save_state_size, + .num_concurrent_stacks = num_cpus, + .per_cpu_save_state_size = save_state_size, + .num_concurrent_save_states = num_cpus, + }; + + printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n", + relo_params->smram_base); + if (smm_load_module((void *)relo_params->smram_base, + relo_params->smram_size, &smm_params)) + return -1; + + adjust_apic_id_map(&smm_params); + + return 0; +} + +static int cpu_smm_setup(void) +{ + device_t dev = SA_DEV_ROOT; + int num_cpus; + msr_t msr; + + printk(BIOS_DEBUG, "Setting up SMI for CPU\n"); + + fill_in_relocation_params(dev, &smm_reloc_params); + + setup_ied_area(&smm_reloc_params); + + msr = rdmsr(CORE_THREAD_COUNT_MSR); + num_cpus = msr.lo & 0xffff; + if (num_cpus > CONFIG_MAX_CPUS) { + printk(BIOS_CRIT, + "Error: Hardware CPUs (%d) > MAX_CPUS (%d)\n", + num_cpus, CONFIG_MAX_CPUS); + } + + if (install_relocation_handler(num_cpus, &smm_reloc_params)) { + printk(BIOS_CRIT, "SMM Relocation handler install failed.\n"); + return -1; + } + + if (install_permanent_handler(num_cpus, &smm_reloc_params)) { + printk(BIOS_CRIT, "SMM Permanent handler install failed.\n"); + return -1; + } + + /* Ensure the SMM handlers hit DRAM before performing first SMI. */ + /* TODO(adurbin): Is this really needed? */ + wbinvd(); + + return 0; +} + +int smm_initialize(void) +{ + /* Return early if CPU SMM setup failed. */ + if (cpu_smm_setup()) + return -1; + + /* Clear the SMM state in the southbridge. */ + southbridge_smm_clear_state(); + + /* Run the relocation handler. */ + smm_initiate_relocation(); + + if (smm_reloc_params.smm_save_state_in_msrs) { + printk(BIOS_DEBUG, "Doing parallel SMM relocation.\n"); + } + + return 0; +} + +void smm_relocate(void) +{ + /* + * If smm_save_state_in_msrs is non-zero then parallel SMM relocation + * shall take place. Run the relocation handler a second time on the + * BSP to do * the final move. For APs, a relocation handler always + * needs to be run. + */ + if (smm_reloc_params.smm_save_state_in_msrs) + smm_initiate_relocation_parallel(); + else if (!boot_cpu()) + smm_initiate_relocation(); +} + +void smm_init(void) +{ + /* smm_init() is normally called from initialize_cpus() in + * lapic_cpu_init.c. However, that path is no longer used. Don't reuse + * the function name because that would cause confusion. + * The smm_initialize() function above is used to setup SMM at the + * appropriate time. */ +} + +void smm_lock(void) +{ + /* LOCK the SMM memory window and enable normal SMM. + * After running this function, only a full reset can + * make the SMM registers writable again. + */ + printk(BIOS_DEBUG, "Locking SMM.\n"); + pci_write_config8(SA_DEV_ROOT, SMRAM, D_LCK | G_SMRAME | C_BASE_SEG); +} diff --git a/src/soc/intel/skylake/spi.c b/src/soc/intel/skylake/spi.c new file mode 100644 index 0000000..36558a1 --- /dev/null +++ b/src/soc/intel/skylake/spi.c @@ -0,0 +1,680 @@ +/* + * Copyright (C) 2014 Google Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file is derived from the flashrom project. */ +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <bootstate.h> +#include <delay.h> +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <spi-generic.h> +#include <soc/pci_devs.h> +#include <soc/rcba.h> +#include <soc/spi.h> + +#ifdef __SMM__ +#define pci_read_config_byte(dev, reg, targ)\ + *(targ) = pci_read_config8(dev, reg) +#define pci_read_config_word(dev, reg, targ)\ + *(targ) = pci_read_config16(dev, reg) +#define pci_read_config_dword(dev, reg, targ)\ + *(targ) = pci_read_config32(dev, reg) +#define pci_write_config_byte(dev, reg, val)\ + pci_write_config8(dev, reg, val) +#define pci_write_config_word(dev, reg, val)\ + pci_write_config16(dev, reg, val) +#define pci_write_config_dword(dev, reg, val)\ + pci_write_config32(dev, reg, val) +#else /* !__SMM__ */ +#include <device/device.h> +#include <device/pci.h> +#define pci_read_config_byte(dev, reg, targ)\ + *(targ) = pci_read_config8(dev, reg) +#define pci_read_config_word(dev, reg, targ)\ + *(targ) = pci_read_config16(dev, reg) +#define pci_read_config_dword(dev, reg, targ)\ + *(targ) = pci_read_config32(dev, reg) +#define pci_write_config_byte(dev, reg, val)\ + pci_write_config8(dev, reg, val) +#define pci_write_config_word(dev, reg, val)\ + pci_write_config16(dev, reg, val) +#define pci_write_config_dword(dev, reg, val)\ + pci_write_config32(dev, reg, val) +#endif /* !__SMM__ */ + +typedef struct spi_slave ich_spi_slave; + +static int ichspi_lock = 0; + +typedef struct ich9_spi_regs { + uint32_t bfpr; + uint16_t hsfs; + uint16_t hsfc; + uint32_t faddr; + uint32_t _reserved0; + uint32_t fdata[16]; + uint32_t frap; + uint32_t freg[5]; + uint32_t _reserved1[3]; + uint32_t pr[5]; + uint32_t _reserved2[2]; + uint8_t ssfs; + uint8_t ssfc[3]; + uint16_t preop; + uint16_t optype; + uint8_t opmenu[8]; + uint32_t bbar; + uint8_t _reserved3[12]; + uint32_t fdoc; + uint32_t fdod; + uint8_t _reserved4[8]; + uint32_t afc; + uint32_t lvscc; + uint32_t uvscc; + uint8_t _reserved5[4]; + uint32_t fpb; + uint8_t _reserved6[28]; + uint32_t srdl; + uint32_t srdc; + uint32_t srd; +} __attribute__((packed)) ich9_spi_regs; + +typedef struct ich_spi_controller { + int locked; + + uint8_t *opmenu; + int menubytes; + uint16_t *preop; + uint16_t *optype; + uint32_t *addr; + uint8_t *data; + unsigned databytes; + uint8_t *status; + uint16_t *control; + uint32_t *bbar; +} ich_spi_controller; + +static ich_spi_controller cntlr; + +enum { + SPIS_SCIP = 0x0001, + SPIS_GRANT = 0x0002, + SPIS_CDS = 0x0004, + SPIS_FCERR = 0x0008, + SSFS_AEL = 0x0010, + SPIS_LOCK = 0x8000, + SPIS_RESERVED_MASK = 0x7ff0, + SSFS_RESERVED_MASK = 0x7fe2 +}; + +enum { + SPIC_SCGO = 0x000002, + SPIC_ACS = 0x000004, + SPIC_SPOP = 0x000008, + SPIC_DBC = 0x003f00, + SPIC_DS = 0x004000, + SPIC_SME = 0x008000, + SSFC_SCF_MASK = 0x070000, + SSFC_RESERVED = 0xf80000 +}; + +enum { + HSFS_FDONE = 0x0001, + HSFS_FCERR = 0x0002, + HSFS_AEL = 0x0004, + HSFS_BERASE_MASK = 0x0018, + HSFS_BERASE_SHIFT = 3, + HSFS_SCIP = 0x0020, + HSFS_FDOPSS = 0x2000, + HSFS_FDV = 0x4000, + HSFS_FLOCKDN = 0x8000 +}; + +enum { + HSFC_FGO = 0x0001, + HSFC_FCYCLE_MASK = 0x0006, + HSFC_FCYCLE_SHIFT = 1, + HSFC_FDBC_MASK = 0x3f00, + HSFC_FDBC_SHIFT = 8, + HSFC_FSMIE = 0x8000 +}; + +enum { + SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0, + SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1, + SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2, + SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3 +}; + +#if CONFIG_DEBUG_SPI_FLASH + +static u8 readb_(const void *addr) +{ + u8 v = read8(addr); + printk(BIOS_DEBUG, "read %2.2x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static u16 readw_(const void *addr) +{ + u16 v = read16(addr); + printk(BIOS_DEBUG, "read %4.4x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static u32 readl_(const void *addr) +{ + u32 v = read32(addr); + printk(BIOS_DEBUG, "read %8.8x from %4.4x\n", + v, ((unsigned) addr & 0xffff) - 0xf020); + return v; +} + +static void writeb_(u8 b, const void *addr) +{ + write8(addr, b); + printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +static void writew_(u16 b, const void *addr) +{ + write16(addr, b); + printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +static void writel_(u32 b, const void *addr) +{ + write32(addr, b); + printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n", + b, ((unsigned) addr & 0xffff) - 0xf020); +} + +#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */ + +#define readb_(a) read8(a) +#define readw_(a) read16(a) +#define readl_(a) read32(a) +#define writeb_(val, addr) write8(addr, val) +#define writew_(val, addr) write16(addr, val) +#define writel_(val, addr) write32(addr, val) + +#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */ + +static void write_reg(const void *value, void *dest, uint32_t size) +{ + const uint8_t *bvalue = value; + uint8_t *bdest = dest; + + while (size >= 4) { + writel_(*(const uint32_t *)bvalue, bdest); + bdest += 4; bvalue += 4; size -= 4; + } + while (size) { + writeb_(*bvalue, bdest); + bdest++; bvalue++; size--; + } +} + +static void read_reg(const void *src, void *value, uint32_t size) +{ + const uint8_t *bsrc = src; + uint8_t *bvalue = value; + + while (size >= 4) { + *(uint32_t *)bvalue = readl_(bsrc); + bsrc += 4; bvalue += 4; size -= 4; + } + while (size) { + *bvalue = readb_(bsrc); + bsrc++; bvalue++; size--; + } +} + +static void ich_set_bbar(uint32_t minaddr) +{ + const uint32_t bbar_mask = 0x00ffff00; + uint32_t ichspi_bbar; + + minaddr &= bbar_mask; + ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask; + ichspi_bbar |= minaddr; + writel_(ichspi_bbar, cntlr.bbar); +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs) +{ + ich_spi_slave *slave = malloc(sizeof(*slave)); + + if (!slave) { + printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n"); + return NULL; + } + + memset(slave, 0, sizeof(*slave)); + + slave->bus = bus; + slave->cs = cs; + return slave; +} + +void spi_init(void) +{ + uint8_t *rcrb; /* Root Complex Register Block */ + uint32_t rcba; /* Root Complex Base Address */ + uint8_t bios_cntl; + device_t dev = PCH_DEV_LPC; + ich9_spi_regs *ich9_spi; + + pci_read_config_dword(dev, 0xf0, &rcba); + /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */ + rcrb = (uint8_t *)(rcba & 0xffffc000); + ich9_spi = (ich9_spi_regs *)(rcrb + 0x3800); + ichspi_lock = readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN; + cntlr.opmenu = ich9_spi->opmenu; + cntlr.menubytes = sizeof(ich9_spi->opmenu); + cntlr.optype = &ich9_spi->optype; + cntlr.addr = &ich9_spi->faddr; + cntlr.data = (uint8_t *)ich9_spi->fdata; + cntlr.databytes = sizeof(ich9_spi->fdata); + cntlr.status = &ich9_spi->ssfs; + cntlr.control = (uint16_t *)ich9_spi->ssfc; + cntlr.bbar = &ich9_spi->bbar; + cntlr.preop = &ich9_spi->preop; + ich_set_bbar(0); + + /* Disable the BIOS write protect so write commands are allowed. */ + pci_read_config_byte(dev, 0xdc, &bios_cntl); + bios_cntl &= ~(1 << 5); + pci_write_config_byte(dev, 0xdc, bios_cntl | 0x1); +} + +#if ENV_RAMSTAGE +static void spi_init_cb(void *unused) +{ + spi_init(); +} + +BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, spi_init_cb, NULL); +#endif + +int spi_claim_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +typedef struct spi_transaction { + const uint8_t *out; + uint32_t bytesout; + uint8_t *in; + uint32_t bytesin; + uint8_t type; + uint8_t opcode; + uint32_t offset; +} spi_transaction; + +static inline void spi_use_out(spi_transaction *trans, unsigned bytes) +{ + trans->out += bytes; + trans->bytesout -= bytes; +} + +static inline void spi_use_in(spi_transaction *trans, unsigned bytes) +{ + trans->in += bytes; + trans->bytesin -= bytes; +} + +static void spi_setup_type(spi_transaction *trans) +{ + trans->type = 0xFF; + + /* Try to guess spi type from read/write sizes. */ + if (trans->bytesin == 0) { + if (trans->bytesout > 4) + /* + * If bytesin = 0 and bytesout > 4, we presume this is + * a write data operation, which is accompanied by an + * address. + */ + trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS; + else + trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; + return; + } + + if (trans->bytesout == 1) { /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; + return; + } + + if (trans->bytesout == 4) { /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + } + + /* Fast read command is called with 5 bytes instead of 4 */ + if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) { + trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + --trans->bytesout; + } +} + +static int spi_setup_opcode(spi_transaction *trans) +{ + uint16_t optypes; + uint8_t opmenu[cntlr.menubytes]; + + trans->opcode = trans->out[0]; + spi_use_out(trans, 1); + if (!ichspi_lock) { + /* The lock is off, so just use index 0. */ + writeb_(trans->opcode, cntlr.opmenu); + optypes = readw_(cntlr.optype); + optypes = (optypes & 0xfffc) | (trans->type & 0x3); + writew_(optypes, cntlr.optype); + return 0; + } else { + /* The lock is on. See if what we need is on the menu. */ + uint8_t optype; + uint16_t opcode_index; + + /* Write Enable is handled as atomic prefix */ + if (trans->opcode == SPI_OPCODE_WREN) + return 0; + + read_reg(cntlr.opmenu, opmenu, sizeof(opmenu)); + for (opcode_index = 0; opcode_index < cntlr.menubytes; + opcode_index++) { + if (opmenu[opcode_index] == trans->opcode) + break; + } + + if (opcode_index == cntlr.menubytes) { + printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n", + trans->opcode); + return -1; + } + + optypes = readw_(cntlr.optype); + optype = (optypes >> (opcode_index * 2)) & 0x3; + if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && + optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && + trans->bytesout >= 3) { + /* We guessed wrong earlier. Fix it up. */ + trans->type = optype; + } + if (optype != trans->type) { + printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n", + optype); + return -1; + } + return opcode_index; + } +} + +static int spi_setup_offset(spi_transaction *trans) +{ + /* Separate the SPI address and data. */ + switch (trans->type) { + case SPI_OPCODE_TYPE_READ_NO_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS: + return 0; + case SPI_OPCODE_TYPE_READ_WITH_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS: + trans->offset = ((uint32_t)trans->out[0] << 16) | + ((uint32_t)trans->out[1] << 8) | + ((uint32_t)trans->out[2] << 0); + spi_use_out(trans, 3); + return 1; + default: + printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type); + return -1; + } +} + +/* + * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set + * below is True) or 0. In case the wait was for the bit(s) to set - write + * those bits back, which would cause resetting them. + * + * Return the last read status value on success or -1 on failure. + */ +static int ich_status_poll(u16 bitmask, int wait_til_set) +{ + int timeout = 6000; /* This will result in 60 ms */ + u16 status = 0; + + while (timeout--) { + status = readw_(cntlr.status); + if (wait_til_set ^ ((status & bitmask) == 0)) { + if (wait_til_set) + writew_((status & bitmask), cntlr.status); + return status; + } + udelay(10); + } + + printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n", + status, bitmask); + return -1; +} + +unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len) +{ + return min(cntlr.databytes, buf_len); +} + +int spi_xfer(struct spi_slave *slave, const void *dout, + unsigned int bytesout, void *din, unsigned int bytesin) +{ + uint16_t control; + int16_t opcode_index; + int with_address; + int status; + + spi_transaction trans = { + dout, bytesout, + din, bytesin, + 0xff, 0xff, 0 + }; + + /* There has to always at least be an opcode. */ + if (!bytesout || !dout) { + printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n"); + return -1; + } + /* Make sure if we read something we have a place to put it. */ + if (bytesin != 0 && !din) { + printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n"); + return -1; + } + + if (ich_status_poll(SPIS_SCIP, 0) == -1) + return -1; + + writew_(SPIS_CDS | SPIS_FCERR, cntlr.status); + + spi_setup_type(&trans); + if ((opcode_index = spi_setup_opcode(&trans)) < 0) + return -1; + if ((with_address = spi_setup_offset(&trans)) < 0) + return -1; + + if (trans.opcode == SPI_OPCODE_WREN) { + /* + * Treat Write Enable as Atomic Pre-Op if possible + * in order to prevent the Management Engine from + * issuing a transaction between WREN and DATA. + */ + if (!ichspi_lock) + writew_(trans.opcode, cntlr.preop); + return 0; + } + + /* Preset control fields */ + control = SPIC_SCGO | ((opcode_index & 0x07) << 4); + + /* Issue atomic preop cycle if needed */ + if (readw_(cntlr.preop)) + control |= SPIC_ACS; + + if (!trans.bytesout && !trans.bytesin) { + /* SPI addresses are 24 bit only */ + if (with_address) + writel_(trans.offset & 0x00FFFFFF, cntlr.addr); + + /* + * This is a 'no data' command (like Write Enable), its + * bytesout size was 1, decremented to zero while executing + * spi_setup_opcode() above. Tell the chip to send the + * command. + */ + writew_(control, cntlr.control); + + /* wait for the result */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n"); + return -1; + } + + return 0; + } + + /* + * Check if this is a write command attempting to transfer more bytes + * than the controller can handle. Iterations for writes are not + * supported here because each SPI write command needs to be preceded + * and followed by other SPI commands, and this sequence is controlled + * by the SPI chip driver. + */ + if (trans.bytesout > cntlr.databytes) { + printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use" + " CONTROLLER_PAGE_LIMIT?\n"); + return -1; + } + + /* + * Read or write up to databytes bytes at a time until everything has + * been sent. + */ + while (trans.bytesout || trans.bytesin) { + uint32_t data_length; + + /* SPI addresses are 24 bit only */ + /* http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/pent… */ + writel_(trans.offset & 0x00FFFFFF, cntlr.addr); + + if (trans.bytesout) + data_length = min(trans.bytesout, cntlr.databytes); + else + data_length = min(trans.bytesin, cntlr.databytes); + + /* Program data into FDATA0 to N */ + if (trans.bytesout) { + write_reg(trans.out, cntlr.data, data_length); + spi_use_out(&trans, data_length); + if (with_address) + trans.offset += data_length; + } + + /* Add proper control fields' values */ + control &= ~((cntlr.databytes - 1) << 8); + control |= SPIC_DS; + control |= (data_length - 1) << 8; + + /* write it */ + writew_(control, cntlr.control); + + /* Wait for Cycle Done Status or Flash Cycle Error. */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n"); + return -1; + } + + if (trans.bytesin) { + read_reg(cntlr.data, trans.in, data_length); + spi_use_in(&trans, data_length); + if (with_address) + trans.offset += data_length; + } + } + + /* Clear atomic preop now that xfer is done */ + writew_(0, cntlr.preop); + + return 0; +} + +/* Use first empty Protected Range Register to cover region of flash */ +int spi_flash_protect(u32 start, u32 size) +{ + u32 end = start + size - 1; + u32 reg; + int prr; + + /* Find first empty PRR */ + for (prr = 0; prr < SPI_PRR_MAX; prr++) { + reg = SPIBAR32(SPI_PRR(prr)); + if (reg == 0) + break; + } + if (prr >= SPI_PRR_MAX) { + printk(BIOS_ERR, "ERROR: No SPI PRR free!\n"); + return -1; + } + + /* Set protected range base and limit */ + reg = ((end >> SPI_PRR_SHIFT) & SPI_PRR_MASK); + reg <<= SPI_PRR_LIMIT_SHIFT; + reg |= ((start >> SPI_PRR_SHIFT) & SPI_PRR_MASK); + reg |= SPI_PRR_WPE; + + /* Set the PRR register and verify it is protected */ + SPIBAR32(SPI_PRR(prr)) = reg; + reg = SPIBAR32(SPI_PRR(prr)); + if (!(reg & SPI_PRR_WPE)) { + printk(BIOS_ERR, "ERROR: Unable to set SPI PRR %d\n", prr); + return -1; + } + + printk(BIOS_INFO, "%s: PRR %d is enabled for range 0x%08x-0x%08x\n", + __func__, prr, start, end); + return 0; +} diff --git a/src/soc/intel/skylake/stage_cache.c b/src/soc/intel/skylake/stage_cache.c new file mode 100644 index 0000000..346e673 --- /dev/null +++ b/src/soc/intel/skylake/stage_cache.c @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <cbmem.h> +#include <soc/smm.h> +#include <stage_cache.h> +#include <stdint.h> + +void stage_cache_external_region(void **base, size_t *size) +{ + /* The ramstage cache lives in the TSEG region. + * The top of ram is defined to be the TSEG base address. */ + u32 offset = smm_region_size(); + offset -= CONFIG_IED_REGION_SIZE; + offset -= CONFIG_SMM_RESERVED_SIZE; + + *base = (void *)(cbmem_top() + offset); + *size = CONFIG_SMM_RESERVED_SIZE; +} diff --git a/src/soc/intel/skylake/systemagent.c b/src/soc/intel/skylake/systemagent.c new file mode 100644 index 0000000..d58cf21 --- /dev/null +++ b/src/soc/intel/skylake/systemagent.c @@ -0,0 +1,452 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <stdint.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <stdlib.h> +#include <string.h> +#include <cbmem.h> +#include <vendorcode/google/chromeos/chromeos.h> +#include <soc/cpu.h> +#include <soc/iomap.h> +#include <soc/pci_devs.h> +#include <soc/ramstage.h> +#include <soc/systemagent.h> + +u8 systemagent_revision(void) +{ + return pci_read_config8(SA_DEV_ROOT, PCI_REVISION_ID); +} + +static int get_pcie_bar(device_t dev, unsigned int index, u32 *base, u32 *len) +{ + u32 pciexbar_reg; + + *base = 0; + *len = 0; + + pciexbar_reg = pci_read_config32(dev, index); + + if (!(pciexbar_reg & (1 << 0))) + return 0; + + switch ((pciexbar_reg >> 1) & 3) { + case 0: // 256MB + *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)| + (1 << 28)); + *len = 256 * 1024 * 1024; + return 1; + case 1: // 128M + *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)| + (1 << 28)|(1 << 27)); + *len = 128 * 1024 * 1024; + return 1; + case 2: // 64M + *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)| + (1 << 28)|(1 << 27)|(1 << 26)); + *len = 64 * 1024 * 1024; + return 1; + } + + return 0; +} + +static int get_bar(device_t dev, unsigned int index, u32 *base, u32 *len) +{ + u32 bar; + + bar = pci_read_config32(dev, index); + + /* If not enabled don't report it. */ + if (!(bar & 0x1)) + return 0; + + /* Knock down the enable bit. */ + *base = bar & ~1; + + return 1; +} + +/* There are special BARs that actually are programmed in the MCHBAR. These + * Intel special features, but they do consume resources that need to be + * accounted for. */ +static int get_bar_in_mchbar(device_t dev, unsigned int index, u32 *base, + u32 *len) +{ + u32 bar; + + bar = MCHBAR32(index); + + /* If not enabled don't report it. */ + if (!(bar & 0x1)) + return 0; + + /* Knock down the enable bit. */ + *base = bar & ~1; + + return 1; +} + +struct fixed_mmio_descriptor { + unsigned int index; + u32 size; + int (*get_resource)(device_t dev, unsigned int index, + u32 *base, u32 *size); + const char *description; +}; + +struct fixed_mmio_descriptor mc_fixed_resources[] = { + { PCIEXBAR, 0, get_pcie_bar, "PCIEXBAR" }, + { MCHBAR, MCH_BASE_SIZE, get_bar, "MCHBAR" }, + { DMIBAR, DMI_BASE_SIZE, get_bar, "DMIBAR" }, + { EPBAR, EP_BASE_SIZE, get_bar, "EPBAR" }, + { GDXCBAR, GDXC_BASE_SIZE, get_bar_in_mchbar, "GDXCBAR" }, + { EDRAMBAR, EDRAM_BASE_SIZE, get_bar_in_mchbar, "EDRAMBAR" }, +}; + +/* + * Add all known fixed MMIO ranges that hang off the host bridge/memory + * controller device. + */ +static void mc_add_fixed_mmio_resources(device_t dev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mc_fixed_resources); i++) { + u32 base; + u32 size; + struct resource *resource; + unsigned int index; + + size = mc_fixed_resources[i].size; + index = mc_fixed_resources[i].index; + if (!mc_fixed_resources[i].get_resource(dev, index, + &base, &size)) + continue; + + resource = new_resource(dev, mc_fixed_resources[i].index); + resource->flags = IORESOURCE_MEM | IORESOURCE_FIXED | + IORESOURCE_STORED | IORESOURCE_RESERVE | + IORESOURCE_ASSIGNED; + resource->base = base; + resource->size = size; + printk(BIOS_DEBUG, "%s: Adding %s @ %x 0x%08lx-0x%08lx.\n", + __func__, mc_fixed_resources[i].description, index, + (unsigned long)base, (unsigned long)(base + size - 1)); + } +} + +/* Host Memory Map: + * + * +--------------------------+ TOUUD + * | | + * +--------------------------+ 4GiB + * | PCI Address Space | + * +--------------------------+ TOLUD (also maps into MC address space) + * | iGD | + * +--------------------------+ BDSM + * | GTT | + * +--------------------------+ BGSM + * | TSEG | + * +--------------------------+ TSEGMB + * | Usage DRAM | + * +--------------------------+ 0 + * + * Some of the base registers above can be equal making the size of those + * regions 0. The reason is because the memory controller internally subtracts + * the base registers from each other to determine sizes of the regions. In + * other words, the memory map is in a fixed order no matter what. + */ + +struct map_entry { + int reg; + int is_64_bit; + int is_limit; + const char *description; +}; + +static void read_map_entry(device_t dev, struct map_entry *entry, + uint64_t *result) +{ + uint64_t value; + uint64_t mask; + + /* All registers are on a 1MiB granularity. */ + mask = ((1ULL<<20)-1); + mask = ~mask; + + value = 0; + + if (entry->is_64_bit) { + value = pci_read_config32(dev, entry->reg + 4); + value <<= 32; + } + + value |= pci_read_config32(dev, entry->reg); + value &= mask; + + if (entry->is_limit) + value |= ~mask; + + *result = value; +} + +#define MAP_ENTRY(reg_, is_64_, is_limit_, desc_) \ + { \ + .reg = reg_, \ + .is_64_bit = is_64_, \ + .is_limit = is_limit_, \ + .description = desc_, \ + } + +#define MAP_ENTRY_BASE_64(reg_, desc_) \ + MAP_ENTRY(reg_, 1, 0, desc_) +#define MAP_ENTRY_LIMIT_64(reg_, desc_) \ + MAP_ENTRY(reg_, 1, 1, desc_) +#define MAP_ENTRY_BASE_32(reg_, desc_) \ + MAP_ENTRY(reg_, 0, 0, desc_) + +enum { + TOM_REG, + TOUUD_REG, + MESEG_BASE_REG, + MESEG_LIMIT_REG, + REMAP_BASE_REG, + REMAP_LIMIT_REG, + TOLUD_REG, + BGSM_REG, + BDSM_REG, + TSEG_REG, + // Must be last. + NUM_MAP_ENTRIES +}; + +static struct map_entry memory_map[NUM_MAP_ENTRIES] = { + [TOM_REG] = MAP_ENTRY_BASE_64(TOM, "TOM"), + [TOUUD_REG] = MAP_ENTRY_BASE_64(TOUUD, "TOUUD"), + [MESEG_BASE_REG] = MAP_ENTRY_BASE_64(MESEG_BASE, "MESEG_BASE"), + [MESEG_LIMIT_REG] = MAP_ENTRY_LIMIT_64(MESEG_LIMIT, "MESEG_LIMIT"), + [REMAP_BASE_REG] = MAP_ENTRY_BASE_64(REMAPBASE, "REMAP_BASE"), + [REMAP_LIMIT_REG] = MAP_ENTRY_LIMIT_64(REMAPLIMIT, "REMAP_LIMIT"), + [TOLUD_REG] = MAP_ENTRY_BASE_32(TOLUD, "TOLUD"), + [BDSM_REG] = MAP_ENTRY_BASE_32(BDSM, "BDSM"), + [BGSM_REG] = MAP_ENTRY_BASE_32(BGSM, "BGSM"), + [TSEG_REG] = MAP_ENTRY_BASE_32(TSEG, "TESGMB"), +}; + +static void mc_read_map_entries(device_t dev, uint64_t *values) +{ + int i; + for (i = 0; i < NUM_MAP_ENTRIES; i++) { + read_map_entry(dev, &memory_map[i], &values[i]); + } +} + +static void mc_report_map_entries(device_t dev, uint64_t *values) +{ + int i; + for (i = 0; i < NUM_MAP_ENTRIES; i++) { + printk(BIOS_DEBUG, "MC MAP: %s: 0x%llx\n", + memory_map[i].description, values[i]); + } + /* One can validate the BDSM and BGSM against the GGC. */ + printk(BIOS_DEBUG, "MC MAP: GGC: 0x%x\n", pci_read_config16(dev, GGC)); +} + +static void mc_add_dram_resources(device_t dev) +{ + unsigned long base_k, size_k; + unsigned long touud_k; + unsigned long index; + struct resource *resource; + uint64_t mc_values[NUM_MAP_ENTRIES]; + unsigned long dpr_size = 0; + u32 dpr_reg; + + /* Read in the MAP registers and report their values. */ + mc_read_map_entries(dev, &mc_values[0]); + mc_report_map_entries(dev, &mc_values[0]); + + /* + * DMA Protected Range can be reserved below TSEG for PCODE patch + * or TXT/BootGuard related data. Rather than report a base address + * the DPR register reports the TOP of the region, which is the same + * as TSEG base. The region size is reported in MiB in bits 11:4. + */ + dpr_reg = pci_read_config32(SA_DEV_ROOT, DPR); + if (dpr_reg & DPR_EPM) { + dpr_size = (dpr_reg & DPR_SIZE_MASK) << 16; + printk(BIOS_INFO, "DPR SIZE: 0x%lx\n", dpr_size); + } + + /* + * These are the host memory ranges that should be added: + * - 0 -> 0xa0000: cacheable + * - 0xc0000 -> TSEG : cacheable + * - TESG -> BGSM: cacheable with standard MTRRs and reserved + * - BGSM -> TOLUD: not cacheable with standard MTRRs and reserved + * - 4GiB -> TOUUD: cacheable + * + * The default SMRAM space is reserved so that the range doesn't + * have to be saved during S3 Resume. Once marked reserved the OS + * cannot use the memory. This is a bit of an odd place to reserve + * the region, but the CPU devices don't have dev_ops->read_resources() + * called on them. + * + * The range 0xa0000 -> 0xc0000 does not have any resources + * associated with it to handle legacy VGA memory. If this range + * is not omitted the mtrr code will setup the area as cacheable + * causing VGA access to not work. + * + * The TSEG region is mapped as cacheable so that one can perform + * SMRAM relocation faster. Once the SMRR is enabled the SMRR takes + * precedence over the existing MTRRs covering this region. + * + * It should be noted that cacheable entry types need to be added in + * order. The reason is that the current MTRR code assumes this and + * falls over itself if it isn't. + * + * The resource index starts low and should not meet or exceed + * PCI_BASE_ADDRESS_0. + */ + index = 0; + + /* 0 - > 0xa0000 */ + base_k = 0; + size_k = (0xa0000 >> 10) - base_k; + ram_resource(dev, index++, base_k, size_k); + + /* 0xc0000 -> TSEG - DPR */ + base_k = 0xc0000 >> 10; + size_k = (unsigned long)(mc_values[TSEG_REG] >> 10) - base_k; + size_k -= dpr_size >> 10; + ram_resource(dev, index++, base_k, size_k); + + /* TSEG - DPR -> BGSM */ + resource = new_resource(dev, index++); + resource->base = mc_values[TSEG_REG] - dpr_size; + resource->size = mc_values[BGSM_REG] - resource->base; + resource->flags = IORESOURCE_MEM | IORESOURCE_FIXED | + IORESOURCE_STORED | IORESOURCE_RESERVE | + IORESOURCE_ASSIGNED | IORESOURCE_CACHEABLE; + + /* BGSM -> TOLUD */ + resource = new_resource(dev, index++); + resource->base = mc_values[BGSM_REG]; + resource->size = mc_values[TOLUD_REG] - resource->base; + resource->flags = IORESOURCE_MEM | IORESOURCE_FIXED | + IORESOURCE_STORED | IORESOURCE_RESERVE | + IORESOURCE_ASSIGNED; + + /* 4GiB -> TOUUD */ + base_k = 4096 * 1024; /* 4GiB */ + touud_k = mc_values[TOUUD_REG] >> 10; + size_k = touud_k - base_k; + if (touud_k > base_k) + ram_resource(dev, index++, base_k, size_k); + + /* Reserve everything between A segment and 1MB: + * + * 0xa0000 - 0xbffff: legacy VGA + * 0xc0000 - 0xfffff: RAM + */ + mmio_resource(dev, index++, (0xa0000 >> 10), (0xc0000 - 0xa0000) >> 10); + reserved_ram_resource(dev, index++, (0xc0000 >> 10), + (0x100000 - 0xc0000) >> 10); + + chromeos_reserve_ram_oops(dev, index++); +} + +static void systemagent_read_resources(device_t dev) +{ + /* Read standard PCI resources. */ + pci_dev_read_resources(dev); + + /* Add all fixed MMIO resources. */ + mc_add_fixed_mmio_resources(dev); + + /* Calculate and add DRAM resources. */ + mc_add_dram_resources(dev); +} + +static void systemagent_init(struct device *dev) +{ + u8 bios_reset_cpl, pair; + + /* Enable Power Aware Interrupt Routing */ + pair = MCHBAR8(MCH_PAIR); + pair &= ~0x7; /* Clear 2:0 */ + pair |= 0x4; /* Fixed Priority */ + MCHBAR8(MCH_PAIR) = pair; + + /* + * Set bits 0+1 of BIOS_RESET_CPL to indicate to the CPU + * that BIOS has initialized memory and power management + */ + bios_reset_cpl = MCHBAR8(BIOS_RESET_CPL); + bios_reset_cpl |= 3; + MCHBAR8(BIOS_RESET_CPL) = bios_reset_cpl; + printk(BIOS_DEBUG, "Set BIOS_RESET_CPL\n"); + + /* Configure turbo power limits 1ms after reset complete bit */ + mdelay(1); + set_power_limits(28); +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +static struct device_operations systemagent_ops = { + .read_resources = &systemagent_read_resources, + .acpi_fill_ssdt_generator = &generate_cpu_entries, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .init = &systemagent_init, + .ops_pci = &broadwell_pci_ops, +}; + +static const unsigned short systemagent_ids[] = { + 0x0a04, /* Haswell ULT */ + 0x1604, /* Broadwell-U/Y */ + 0x1610, /* Broadwell-H Desktop */ + 0x1614, /* Broadwell-H Mobile */ + 0 +}; + +static const struct pci_driver systemagent_driver __pci_driver = { + .ops = &systemagent_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = systemagent_ids +}; diff --git a/src/soc/intel/skylake/tsc_freq.c b/src/soc/intel/skylake/tsc_freq.c new file mode 100644 index 0000000..5487b16 --- /dev/null +++ b/src/soc/intel/skylake/tsc_freq.c @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/tsc.h> +#include <soc/cpu.h> +#include <soc/msr.h> + +unsigned long tsc_freq_mhz(void) +{ + msr_t platform_info; + + platform_info = rdmsr(MSR_PLATFORM_INFO); + return CPU_BCLK * ((platform_info.lo >> 8) & 0xff); +} diff --git a/src/soc/intel/skylake/usbdebug.c b/src/soc/intel/skylake/usbdebug.c new file mode 100644 index 0000000..736a1a3 --- /dev/null +++ b/src/soc/intel/skylake/usbdebug.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <arch/io.h> +#include <console/console.h> +#include <usbdebug.h> +#include <device/pci.h> +#include <device/pci_def.h> +#include <soc/pci_devs.h> + +void set_debug_port(unsigned int port) +{ + /* Hardcoded to physical port 1 */ +} + +void enable_usbdebug(unsigned int port) +{ + u32 tmp32; + + tmp32 = pci_read_config32(PCH_DEV_EHCI, PCI_VENDOR_ID); + if (tmp32 == 0xffffffff || tmp32 == 0) + return; + + /* Set the EHCI BAR address. */ + pci_write_config32(PCH_DEV_EHCI, EHCI_BAR_INDEX, CONFIG_EHCI_BAR); + + /* Enable access to the EHCI memory space registers. */ + pci_write_config8(PCH_DEV_EHCI, PCI_COMMAND, PCI_COMMAND_MEMORY); + + /* Force ownership of the Debug Port to the EHCI controller. */ + tmp32 = read32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET); + tmp32 |= (1 << 30); + write32(CONFIG_EHCI_BAR + CONFIG_EHCI_DEBUG_OFFSET, tmp32); +} diff --git a/src/soc/intel/skylake/xhci.c b/src/soc/intel/skylake/xhci.c new file mode 100644 index 0000000..9d0390e --- /dev/null +++ b/src/soc/intel/skylake/xhci.c @@ -0,0 +1,241 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <soc/ramstage.h> +#include <soc/xhci.h> +#include <soc/cpu.h> + +#ifdef __SMM__ +static u8 *usb_xhci_mem_base(device_t dev) +{ + u32 mem_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); + + /* Check if the controller is disabled or not present */ + if (mem_base == 0 || mem_base == 0xffffffff) + return 0; + + return (u8 *)(mem_base & ~0xf); +} + +static int usb_xhci_port_count_usb3(device_t dev) +{ + /* PCH-LP has 4 SS ports */ + return 4; +} + +static void usb_xhci_reset_status_usb3(u8 *mem_base, int port) +{ + u8 *portsc = mem_base + XHCI_USB3_PORTSC(port); + u32 status = read32(portsc); + /* Do not set Port Enabled/Disabled field */ + status &= ~XHCI_USB3_PORTSC_PED; + /* Clear all change status bits */ + status |= XHCI_USB3_PORTSC_CHST; + write32(portsc, status); +} + +static void usb_xhci_reset_port_usb3(u8 *mem_base, int port) +{ + u8 *portsc = mem_base + XHCI_USB3_PORTSC(port); + write32(portsc, read32(portsc) | XHCI_USB3_PORTSC_WPR); +} + +#define XHCI_RESET_DELAY_US 1000 /* 1ms */ +#define XHCI_RESET_TIMEOUT 100 /* 100ms */ + +/* + * 1) Wait until port is done polling + * 2) If port is disconnected + * a) Issue warm port reset + * b) Poll for warm reset complete + * c) Write 1 to port change status bits + */ +static void usb_xhci_reset_usb3(device_t dev, int all) +{ + u32 status, port_disabled; + int timeout, port; + int port_count = usb_xhci_port_count_usb3(dev); + u8 *mem_base = usb_xhci_mem_base(dev); + + if (!mem_base || !port_count) + return; + + /* Get mask of disabled ports */ + port_disabled = pci_read_config32(dev, XHCI_USB3PDO); + + /* Wait until all enabled ports are done polling */ + for (timeout = XHCI_RESET_TIMEOUT; timeout; timeout--) { + int complete = 1; + for (port = 0; port < port_count; port++) { + /* Skip disabled ports */ + if (port_disabled & (1 << port)) + continue; + /* Read port link status field */ + status = read32(mem_base + XHCI_USB3_PORTSC(port)); + status &= XHCI_USB3_PORTSC_PLS; + if (status == XHCI_PLSR_POLLING) + complete = 0; + } + /* Exit if all ports not polling */ + if (complete) + break; + udelay(XHCI_RESET_DELAY_US); + } + + /* Reset all requested ports */ + for (port = 0; port < port_count; port++) { + u8 *portsc = mem_base + XHCI_USB3_PORTSC(port); + /* Skip disabled ports */ + if (port_disabled & (1 << port)) + continue; + status = read32(portsc) & XHCI_USB3_PORTSC_PLS; + /* Reset all or only disconnected ports */ + if (all || (status == XHCI_PLSR_RXDETECT || + status == XHCI_PLSR_POLLING)) + usb_xhci_reset_port_usb3(mem_base, port); + else + port_disabled |= 1 << port; + } + + /* Wait for warm reset complete on all reset ports */ + for (timeout = XHCI_RESET_TIMEOUT; timeout; timeout--) { + int complete = 1; + for (port = 0; port < port_count; port++) { + /* Only check ports that were reset */ + if (port_disabled & (1 << port)) + continue; + /* Check if warm reset is complete */ + status = read32(mem_base + XHCI_USB3_PORTSC(port)); + if (!(status & XHCI_USB3_PORTSC_WRC)) + complete = 0; + } + /* Check for warm reset complete in any port */ + if (complete) + break; + udelay(XHCI_RESET_DELAY_US); + } + + /* Clear port change status bits */ + for (port = 0; port < port_count; port++) + usb_xhci_reset_status_usb3(mem_base, port); +} + +/* Handler for XHCI controller on entry to S3/S4/S5 */ +void usb_xhci_sleep_prepare(device_t dev, u8 slp_typ) +{ + u16 reg16; + u32 reg32; + u8 *mem_base = usb_xhci_mem_base(dev); + u8 is_broadwell = !!(cpu_family_model() == BROADWELL_FAMILY_ULT); + + if (!mem_base || slp_typ < 3) + return; + + /* Set D0 state */ + reg16 = pci_read_config16(dev, XHCI_PWR_CTL_STS); + reg16 &= ~XHCI_PWR_CTL_SET_MASK; + reg16 |= XHCI_PWR_CTL_SET_D0; + pci_write_config16(dev, XHCI_PWR_CTL_STS, reg16); + + if (!is_broadwell) { + /* This WA is only for lpt */ + + /* Clear PCI 0xB0[14:13] */ + reg32 = pci_read_config32(dev, 0xb0); + reg32 &= ~((1 << 14) | (1 << 13)); + pci_write_config32(dev, 0xb0, reg32); + + /* Clear MMIO 0x816c[14,2] */ + reg32 = read32(mem_base + 0x816c); + reg32 &= ~((1 << 14) | (1 << 2)); + write32(mem_base + 0x816c, reg32); + + /* Reset disconnected USB3 ports */ + usb_xhci_reset_usb3(dev, 0); + + /* Set MMIO 0x80e0[15] */ + reg32 = read32(mem_base + 0x80e0); + reg32 |= (1 << 15); + write32(mem_base + 0x80e0, reg32); + } else { + /* + * Clear port change status bits. Clearing CSC alone seemed to + * fix wakeup from S3 if entering USB compliance state even if + * bit wasn't set on the port. + */ + int port; + for (port = 0; port < usb_xhci_port_count_usb3(dev); port++) + usb_xhci_reset_status_usb3(mem_base, port); + } + + reg32 = read32(mem_base + 0x8154); + reg32 &= ~(1 << 31); + write32(mem_base + 0x8154, reg32); + + /* Set D3Hot state and enable PME */ + pci_or_config16(dev, XHCI_PWR_CTL_STS, XHCI_PWR_CTL_SET_D3); + pci_or_config16(dev, XHCI_PWR_CTL_STS, XHCI_PWR_CTL_STATUS_PME); + pci_or_config16(dev, XHCI_PWR_CTL_STS, XHCI_PWR_CTL_ENABLE_PME); +} +#else /* !__SMM__ */ + +static void xhci_init(struct device *dev) +{ + struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0); + u16 reg16; + u32 reg32; + + /* Ensure controller is in D0 state */ + reg16 = pci_read_config16(dev, XHCI_PWR_CTL_STS); + reg16 &= ~XHCI_PWR_CTL_SET_MASK; + reg16 |= XHCI_PWR_CTL_SET_D0; + pci_write_config16(dev, XHCI_PWR_CTL_STS, reg16); + + /* Disable Compliance Mode Entry */ + reg32 = read32(res2mmio(res, 0x80ec, 0)); + reg32 |= (1 << 0); + write32(res2mmio(res, 0x80ec, 0), reg32); +} + +static struct device_operations usb_xhci_ops = { + .read_resources = &pci_dev_read_resources, + .set_resources = &pci_dev_set_resources, + .enable_resources = &pci_dev_enable_resources, + .ops_pci = &broadwell_pci_ops, + .init = &xhci_init, +}; + +static const unsigned short pci_device_ids[] = { + 0x9c31, /* LynxPoint-LP */ + 0x9cb1, /* WildcatPoint */ + 0 +}; + +static const struct pci_driver pch_usb_xhci __pci_driver = { + .ops = &usb_xhci_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; +#endif /* !__SMM__ */

1 0

Patch set updated for coreboot: lib/hexdump: Add xxd hint
by Leroy P Leahy 13 Jul '15

13 Jul '15

Leroy P Leahy (leroy.p.leahy(a)intel.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10207 -gerrit commit d28f103f7d9483f9554ac05e8798ee1bdb1db05a Author: Lee Leahy <leroy.p.leahy(a)intel.com> Date: Thu May 14 14:50:42 2015 -0700 lib/hexdump: Add xxd hint For people new to Linux, add the xxd hint to compare output with output from Linux. for people new to Linux.Support formatting the output to match the Ubuntu BRANCH=none BUG=None TEST=Build and run on cyan Change-Id: Ia46aeed056b12abbadf8205b044944385d9410e1 Signed-off-by: Lee Leahy <leroy.p.leahy(a)intel.com> --- src/include/lib.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/src/include/lib.h b/src/include/lib.h index b81b1b1..7d20fa8 100644 --- a/src/include/lib.h +++ b/src/include/lib.h @@ -39,7 +39,10 @@ int primitive_memtest(uintptr_t base, uintptr_t size); /* Defined in src/lib/stack.c */ int checkstack(void *top_of_stack, int core); -/* Defined in src/lib/hexdump.c */ +/* + * Defined in src/lib/hexdump.c + * Use the Linux command "xxd" for matching output + */ void hexdump(const void *memory, size_t length); void hexdump32(char LEVEL, const void *d, size_t len);

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit July 2015