coreboot-gerrit September 2024

coreboot-gerrit@coreboot.org

1 participants
2284 discussions

[S] Change in coreboot[main]: soc/amd/glinda: Update SCI mapping
by Maximilian Brune (Code Review) 18 Sep '24

18 Sep '24

Attention is currently required from: Felix Held. Maximilian Brune has posted comments on this change by Maximilian Brune. ( https://review.coreboot.org/c/coreboot/+/84381?usp=email ) Change subject: soc/amd/glinda: Update SCI mapping ...................................................................... Patch Set 1: (1 comment) File src/soc/amd/glinda/include/soc/pci_devs.h: https://review.coreboot.org/c/coreboot/+/84381/comment/c063d26b_f252a49b?us… : PS1, Line 68: #define XHCI0_DEV 0x0 : #define XHCI0_FUNC 0 : #define XHCI0_DEVFN PCI_DEVFN(XHCI0_DEV, XHCI0_FUNC) > this one should be moved below the correct internal bus C Done -- To view, visit https://review.coreboot.org/c/coreboot/+/84381?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I5eaed888109b89c25bcf0ba91abefa7c36c1851b Gerrit-Change-Number: 84381 Gerrit-PatchSet: 1 Gerrit-Owner: Maximilian Brune <maximilian.brune(a)9elements.com> Gerrit-Reviewer: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-Comment-Date: Wed, 18 Sep 2024 02:25:19 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Felix Held <felix-coreboot(a)felixheld.de>

1 0

[S] Change in coreboot[main]: soc/amd/glinda: Update SCI mapping
by Maximilian Brune (Code Review) 18 Sep '24

18 Sep '24

Attention is currently required from: Maximilian Brune. Hello Felix Held, build bot (Jenkins), I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/coreboot/+/84381?usp=email to look at the new patch set (#2). The following approvals got outdated and were removed: Verified+1 by build bot (Jenkins) Change subject: soc/amd/glinda: Update SCI mapping ...................................................................... soc/amd/glinda: Update SCI mapping source: PPR #57254 Rev 1.71 Change-Id: I5eaed888109b89c25bcf0ba91abefa7c36c1851b Signed-off-by: Maximilian Brune <maximilian.brune(a)9elements.com> --- M src/soc/amd/glinda/include/soc/pci_devs.h M src/soc/amd/glinda/xhci.c 2 files changed, 27 insertions(+), 14 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/81/84381/2 -- To view, visit https://review.coreboot.org/c/coreboot/+/84381?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newpatchset Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I5eaed888109b89c25bcf0ba91abefa7c36c1851b Gerrit-Change-Number: 84381 Gerrit-PatchSet: 2 Gerrit-Owner: Maximilian Brune <maximilian.brune(a)9elements.com> Gerrit-Reviewer: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Maximilian Brune <maximilian.brune(a)9elements.com>

1 0

[XS] Change in coreboot[main]: efi: Set EFIAPI to 32-bit ABI for FSP1_1
by Subrata Banik (Code Review) 18 Sep '24

18 Sep '24

Attention is currently required from: Jérémy Compostella. Subrata Banik has posted comments on this change by Jérémy Compostella. ( https://review.coreboot.org/c/coreboot/+/84402?usp=email ) Change subject: efi: Set EFIAPI to 32-bit ABI for FSP1_1 ...................................................................... Patch Set 2: Code-Review+2 (1 comment) Commit Message: https://review.coreboot.org/c/coreboot/+/84402/comment/e22e12f1_66aaf93d?us… : PS2, Line 7: FSP1_1 which platform you have encountered this problem that has support for FSP1.1 and active ? -- To view, visit https://review.coreboot.org/c/coreboot/+/84402?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d5d Gerrit-Change-Number: 84402 Gerrit-PatchSet: 2 Gerrit-Owner: Jérémy Compostella <jeremy.compostella(a)intel.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Jérémy Compostella <jeremy.compostella(a)intel.com> Gerrit-Comment-Date: Wed, 18 Sep 2024 02:23:21 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes

1 0

[M] Change in coreboot[main]: drivers/intel/fsp2_0: Simplify FSP global reset definition
by Subrata Banik (Code Review) 18 Sep '24

18 Sep '24

Attention is currently required from: Andrey Petrov, Dinesh Gehlot, Eran Mitrani, Jakub Czapiga, Jayvik Desai, Jérémy Compostella, Kapil Porwal, Lean Sheng Tan, Nick Vaccaro, Paul Menzel, Pranava Y N, Rishika Raj, Ronak Kanabar, Sean Rhodes, Tarun, Werner Zeh. Subrata Banik has posted comments on this change by Jérémy Compostella. ( https://review.coreboot.org/c/coreboot/+/84356?usp=email ) Change subject: drivers/intel/fsp2_0: Simplify FSP global reset definition ...................................................................... Patch Set 6: (2 comments) File src/drivers/intel/fsp2_0/Kconfig: https://review.coreboot.org/c/coreboot/+/84356/comment/68e0d6d3_3d2b16cc?us… : PS6, Line 347: 3 what is this magic number ? earlier implementation was much clear, please keep the same implementation. File src/soc/intel/apollolake/Kconfig: https://review.coreboot.org/c/coreboot/+/84356/comment/dda330c4_82175bfe?us… : PS6, Line 400: default 5 no one can follow these magic numbers w/o an explanation. The earlier implementation was very clean. Here you are only planning to add 64-bit support. that can be added like what you did as along as Intel FSP spec explicitly says what is the reset status difference between 32-bit vs 64-bit -- To view, visit https://review.coreboot.org/c/coreboot/+/84356?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d5f Gerrit-Change-Number: 84356 Gerrit-PatchSet: 6 Gerrit-Owner: Jérémy Compostella <jeremy.compostella(a)intel.com> Gerrit-Reviewer: Andrey Petrov <andrey.petrov(a)gmail.com> Gerrit-Reviewer: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Reviewer: Eran Mitrani <mitrani(a)google.com> Gerrit-Reviewer: Jakub Czapiga <czapiga(a)google.com> Gerrit-Reviewer: Jayvik Desai <jayvik(a)google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Lean Sheng Tan <sheng.tan(a)9elements.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Reviewer: Pranava Y N <pranavayn(a)google.com> Gerrit-Reviewer: Rishika Raj <rishikaraj(a)google.com> Gerrit-Reviewer: Ronak Kanabar <ronak.kanabar(a)intel.com> Gerrit-Reviewer: Sean Rhodes <sean(a)starlabs.systems> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: Tarun <tstuli(a)gmail.com> Gerrit-Reviewer: Werner Zeh <werner.zeh(a)siemens.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Rishika Raj <rishikaraj(a)google.com> Gerrit-Attention: Eran Mitrani <mitrani(a)google.com> Gerrit-Attention: Jakub Czapiga <czapiga(a)google.com> Gerrit-Attention: Jérémy Compostella <jeremy.compostella(a)intel.com> Gerrit-Attention: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Attention: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Attention: Andrey Petrov <andrey.petrov(a)gmail.com> Gerrit-Attention: Tarun <tstuli(a)gmail.com> Gerrit-Attention: Jayvik Desai <jayvik(a)google.com> Gerrit-Attention: Sean Rhodes <sean(a)starlabs.systems> Gerrit-Attention: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Attention: Lean Sheng Tan <sheng.tan(a)9elements.com> Gerrit-Attention: Ronak Kanabar <ronak.kanabar(a)intel.com> Gerrit-Attention: Werner Zeh <werner.zeh(a)siemens.com> Gerrit-Attention: Pranava Y N <pranavayn(a)google.com> Gerrit-Comment-Date: Wed, 18 Sep 2024 02:22:30 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No

1 0

[S] Change in coreboot[main]: soc/amd/glinda: Update gpp bridge naming scheme
by Maximilian Brune (Code Review) 18 Sep '24

18 Sep '24

Attention is currently required from: Felix Held, Fred Reitberger, Jason Glenesk. Maximilian Brune has posted comments on this change by Maximilian Brune. ( https://review.coreboot.org/c/coreboot/+/84378?usp=email ) Change subject: soc/amd/glinda: Update gpp bridge naming scheme ...................................................................... Patch Set 2: (1 comment) File src/mainboard/amd/birman/devicetree_glinda.cb: https://review.coreboot.org/c/coreboot/+/84378/comment/7ebb3b74_d49176f7?us… : PS1, Line 161: device ref gpp_bridge_2_1 on end # NVME SSD0 : device ref gpp_bridge_2_2 on end # SD : device ref gpp_bridge_2_3 on end # WLAN : device ref gpp_bridge_2_4 on end # GBE > this isn't just the rename of the bridges. […] Done -- To view, visit https://review.coreboot.org/c/coreboot/+/84378?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I9f740d75a3561dba2ed65acb16bb4259f632307d Gerrit-Change-Number: 84378 Gerrit-PatchSet: 2 Gerrit-Owner: Maximilian Brune <maximilian.brune(a)9elements.com> Gerrit-Reviewer: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-Reviewer: Fred Reitberger <reitbergerfred(a)gmail.com> Gerrit-Reviewer: Jason Glenesk <jason.glenesk(a)gmail.com> Gerrit-CC: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Jason Glenesk <jason.glenesk(a)gmail.com> Gerrit-Attention: Fred Reitberger <reitbergerfred(a)gmail.com> Gerrit-Attention: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-Comment-Date: Wed, 18 Sep 2024 02:20:51 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Felix Held <felix-coreboot(a)felixheld.de>

1 0

[M] Change in coreboot[main]: soc/amd/glinda/chipset.cb: Update for glinda
by Maximilian Brune (Code Review) 18 Sep '24

18 Sep '24

Attention is currently required from: Maximilian Brune. Hello Felix Held, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/coreboot/+/84376?usp=email to look at the new patch set (#3). Change subject: soc/amd/glinda/chipset.cb: Update for glinda ...................................................................... soc/amd/glinda/chipset.cb: Update for glinda This also updates the mainboards depending on it. Change-Id: I1138f27bfd47f6fa70a0c2afcc65a5553a609d57 Signed-off-by: Maximilian Brune <maximilian.brune(a)9elements.com> --- M src/mainboard/amd/birman/devicetree_glinda.cb M src/mainboard/amd/birman_plus/devicetree_glinda.cb M src/soc/amd/glinda/chipset.cb 3 files changed, 103 insertions(+), 68 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/76/84376/3 -- To view, visit https://review.coreboot.org/c/coreboot/+/84376?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newpatchset Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I1138f27bfd47f6fa70a0c2afcc65a5553a609d57 Gerrit-Change-Number: 84376 Gerrit-PatchSet: 3 Gerrit-Owner: Maximilian Brune <maximilian.brune(a)9elements.com> Gerrit-Reviewer: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-CC: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Maximilian Brune <maximilian.brune(a)9elements.com>

1 0

[S] Change in coreboot[main]: soc/amd/glinda: Update gpp bridge naming scheme
by Maximilian Brune (Code Review) 18 Sep '24

18 Sep '24

Attention is currently required from: Fred Reitberger, Jason Glenesk, Maximilian Brune. Hello Felix Held, Fred Reitberger, Jason Glenesk, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/coreboot/+/84378?usp=email to look at the new patch set (#2). Change subject: soc/amd/glinda: Update gpp bridge naming scheme ...................................................................... soc/amd/glinda: Update gpp bridge naming scheme This patch updates the naming scheme used for the GPP bridges. The naming scheme now matches what we also have on phoenix. Change-Id: I9f740d75a3561dba2ed65acb16bb4259f632307d Signed-off-by: Maximilian Brune <maximilian.brune(a)9elements.com> --- M src/mainboard/amd/birman/devicetree_glinda.cb M src/mainboard/amd/birman_plus/devicetree_glinda.cb M src/soc/amd/glinda/chipset.cb 3 files changed, 15 insertions(+), 12 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/78/84378/2 -- To view, visit https://review.coreboot.org/c/coreboot/+/84378?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newpatchset Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I9f740d75a3561dba2ed65acb16bb4259f632307d Gerrit-Change-Number: 84378 Gerrit-PatchSet: 2 Gerrit-Owner: Maximilian Brune <maximilian.brune(a)9elements.com> Gerrit-Reviewer: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-Reviewer: Fred Reitberger <reitbergerfred(a)gmail.com> Gerrit-Reviewer: Jason Glenesk <jason.glenesk(a)gmail.com> Gerrit-CC: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Jason Glenesk <jason.glenesk(a)gmail.com> Gerrit-Attention: Maximilian Brune <maximilian.brune(a)9elements.com> Gerrit-Attention: Fred Reitberger <reitbergerfred(a)gmail.com>

1 0

[XL] Change in coreboot[main]: soc/intel/ptl: Add SoC ACPI directory for Panther Lake
by Subrata Banik (Code Review) 18 Sep '24

18 Sep '24

Subrata Banik has submitted this change. ( https://review.coreboot.org/c/coreboot/+/83772?usp=email ) Change subject: soc/intel/ptl: Add SoC ACPI directory for Panther Lake ...................................................................... soc/intel/ptl: Add SoC ACPI directory for Panther Lake List of changes: 1. Select common ACPI Kconfig to include common ACPI code block from IA-common code 2. Select ACPI Kconfig support for wake-up from sleep states. 3. Add SoC ASL code for SoC IPs like IPU, HDA etc. 4. PTL replaces DMI3 with SAF to ensure common/block/acpi/acpi/northbridge.asl binding with PTL change, #if DMI_BASE_SIZE guard check is added in northbridge.asl 5. include GPIO ASL that supports new pinctrl schema. BUG=b:348678529 TEST=Verified on Intel® Simics® Pre Silicon Simulation platform for PTL using google/fatcat mainboard. Change-Id: Ia5cf899b049cb8eb27b4ea30c7f3ce7a14884f15 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi(a)intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83772 Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Subrata Banik <subratabanik(a)google.com> --- M src/soc/intel/pantherlake/Kconfig A src/soc/intel/pantherlake/acpi/camera_clock_ctl.asl A src/soc/intel/pantherlake/acpi/gpio.asl A src/soc/intel/pantherlake/acpi/hda.asl A src/soc/intel/pantherlake/acpi/pcie.asl A src/soc/intel/pantherlake/acpi/serialio.asl A src/soc/intel/pantherlake/acpi/southbridge.asl A src/soc/intel/pantherlake/acpi/tcss.asl A src/soc/intel/pantherlake/acpi/tcss_dma.asl A src/soc/intel/pantherlake/acpi/tcss_pcierp.asl A src/soc/intel/pantherlake/acpi/tcss_xhci.asl A src/soc/intel/pantherlake/acpi/xhci.asl 12 files changed, 2,932 insertions(+), 0 deletions(-) Approvals: build bot (Jenkins): Verified Subrata Banik: Looks good to me, approved diff --git a/src/soc/intel/pantherlake/Kconfig b/src/soc/intel/pantherlake/Kconfig index 0dc65e4..fb6c48b 100644 --- a/src/soc/intel/pantherlake/Kconfig +++ b/src/soc/intel/pantherlake/Kconfig @@ -14,6 +14,7 @@ select DEFAULT_SOFTWARE_CONNECTION_MANAGER if MAINBOARD_HAS_CHROMEOS select DEFAULT_X2APIC_LATE_WORKAROUND select DISPLAY_FSP_VERSION_INFO_2 + select DRIVERS_USB_ACPI select FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW select FSP_COMPRESS_FSP_S_LZ4 select FSP_M_XIP @@ -50,6 +51,13 @@ select SOC_INTEL_COMMON_BASECODE select SOC_INTEL_COMMON_BASECODE_RAMTOP select SOC_INTEL_COMMON_BLOCK + select SOC_INTEL_COMMON_BLOCK_ACPI + select SOC_INTEL_COMMON_BLOCK_ACPI_CPPC + select SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID + select SOC_INTEL_COMMON_BLOCK_ACPI_GPIO + select SOC_INTEL_COMMON_BLOCK_ACPI_LPIT + select SOC_INTEL_COMMON_BLOCK_ACPI_PEP + select SOC_INTEL_COMMON_BLOCK_ACPI_PEP_LPM_REQ select SOC_INTEL_COMMON_BLOCK_CAR select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG select SOC_INTEL_COMMON_BLOCK_CNVI diff --git a/src/soc/intel/pantherlake/acpi/camera_clock_ctl.asl b/src/soc/intel/pantherlake/acpi/camera_clock_ctl.asl new file mode 100644 index 0000000..aded020 --- /dev/null +++ b/src/soc/intel/pantherlake/acpi/camera_clock_ctl.asl @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#define R_ICLK_PCR_CAMERA1 0x8000 +#define B_ICLK_PCR_FREQUENCY 0x1 +#define B_ICLK_PCR_REQUEST 0x2 + +/* The clock control registers for each IMGCLK are offset by 0xC */ +#define B_ICLK_PCR_OFFSET 0xC + +Scope (\_SB.PCI0) { + + /* IsCLK PCH base register for clock settings */ + Name (ICKB, 0) + ICKB = PCRB (PID_ISCLK) + R_ICLK_PCR_CAMERA1 + /* + * Helper function for Read And Or Write + * Arg0 : Clock source select + * Arg1 : And data + * Arg2 : Or data + */ + Method (RAOW, 3, Serialized) + { + OperationRegion (ICLK, SystemMemory, (ICKB + (Arg0 * B_ICLK_PCR_OFFSET)), 4) + Field (ICLK, AnyAcc, NoLock, Preserve) + { + VAL0, 32 + } + Local0 = VAL0 + VAL0 = Local0 & Arg1 | Arg2 + } + + /* + * Clock control Method + * Arg0: Clock source select (0 .. 5 => IMGCLKOUT_0 .. IMGCLKOUT_5) + * Arg1: Frequency select (0: 24MHz, 1: 19.2MHz) + */ + Method (MCON, 0x2, NotSerialized) + { + /* Set Clock Frequency */ + RAOW (Arg0, ~B_ICLK_PCR_FREQUENCY, Arg1) + + /* Enable Clock */ + RAOW (Arg0, ~B_ICLK_PCR_REQUEST, B_ICLK_PCR_REQUEST) + } + + Method (MCOF, 0x1, NotSerialized) + { + /* Disable Clock */ + RAOW (Arg0, ~B_ICLK_PCR_REQUEST, 0) + } +} diff --git a/src/soc/intel/pantherlake/acpi/gpio.asl b/src/soc/intel/pantherlake/acpi/gpio.asl new file mode 100644 index 0000000..c16513b --- /dev/null +++ b/src/soc/intel/pantherlake/acpi/gpio.asl @@ -0,0 +1,923 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <soc/gpio_defs.h> +#include <soc/intel/common/acpi/gpio.asl> +#include <soc/intel/common/block/acpi/acpi/gpio_op.asl> +#include <soc/irq.h> +#include <soc/pcr_ids.h> + +#define GPIO_SW_REVISION 0x00010000 + +/* + * Get GPIO DW0 Address + * Arg0 - GPIO Number + */ +Method (GADD, 1, NotSerialized) +{ + /* GPIO Community 0 */ + If (Arg0 >= COM0_GRP_PAD_START && Arg0 <= COM0_GRP_PAD_END) + { + Local0 = PID_GPIOCOM0 + Local1 = Arg0 - COM0_GRP_PAD_START + } + /* GPIO Community 1 */ + If (Arg0 >= COM1_GRP_PAD_START && Arg0 <= COM1_GRP_PAD_END) + { + Local0 = PID_GPIOCOM1 + Local1 = Arg0 - COM1_GRP_PAD_START + } + /* GPIO Community 3 */ + If (Arg0 >= COM3_GRP_PAD_START && Arg0 <= COM3_GRP_PAD_END) + { + Local0 = PID_GPIOCOM3 + Local1 = Arg0 - COM3_GRP_PAD_START + } + /* GPIO Community 4 */ + If (Arg0 >= COM4_GRP_PAD_START && Arg0 <= COM4_GRP_PAD_END) + { + Local0 = PID_GPIOCOM4 + Local1 = Arg0 - COM4_GRP_PAD_START + } + /* GPIO Community 5*/ + If (Arg0 >= COM5_GRP_PAD_START && Arg0 <= COM5_GRP_PAD_END) + { + Local0 = PID_GPIOCOM5 + Local1 = Arg0 - COM5_GRP_PAD_START + } + + Local2 = PCRB(Local0) + PAD_CFG_BASE + (Local1 * 16) + Return (Local2) +} + +/* + * Return PCR Port ID of GPIO Communities + * + * Arg0: GPIO Community (0-5) + */ +Method (GPID, 1, Serialized) +{ + Switch (ToInteger (Arg0)) + { + Case (COMM_0) { + Local0 = PID_GPIOCOM0 + } + Case (COMM_1) { + Local0 = PID_GPIOCOM1 + } + Case (COMM_3) { + Local0 = PID_GPIOCOM3 + } + Case (COMM_4) { + Local0 = PID_GPIOCOM4 + } + Case (COMM_5) { + Local0 = PID_GPIOCOM5 + } + Default { + Return (0) + } + } + + Return (Local0) +} + +/* GPIO Power Management bits */ +Name(GPMB, Package(TOTAL_GPIO_COMM) {0, 0, 0, 0, 0}) + +/* + * Save GPIO Power Management bits + */ +Method (SGPM, 0, Serialized) +{ + For (Local0 = 0, Local0 < TOTAL_GPIO_COMM, Local0++) + { + Local1 = GPID (Local0) + GPMB[Local0] = PCRR (Local1, GPIO_MISCCFG) + } +} + +/* + * Restore GPIO Power Management bits + */ +Method (RGPM, 0, Serialized) +{ + For (Local0 = 0, Local0 < TOTAL_GPIO_COMM, Local0++) + { + CGPM (Local0, DerefOf(GPMB[Local0])) + } +} + +/* + * Save current setting of GPIO Power Management bits and + * enable all Power Management bits for all communities + */ +Method (EGPM, 0, Serialized) +{ + /* Save current setting and will restore it when resuming */ + SGPM () + /* Enable PM bits */ + For (Local0 = 0, Local0 < TOTAL_GPIO_COMM, Local0++) + { + CGPM (Local0, MISCCFG_GPIO_PM_CONFIG_BITS) + } +} + +/* + * GPIO _CRS + * Returns Interrupt and memory resources required for GPIO controller + * + * Arg0 - GPIO Port ID Offset for given community + */ +Method (GCRS, 0x1, Serialized) { + Name (RBFL,ResourceTemplate() { + Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,, GIRQ) { + GPIO_IRQ14 + } + QWordMemory ( + ResourceConsumer, , + MinFixed, + MaxFixed, + NonCacheable, + ReadWrite, + 0x0, /* AddressGranularity */ + 0x0000000000000000, /* AddressMinimum _MIN */ + 0x000000000000FFFF, /* AddressMaximum _MAX */ + 0x0, /* AddressTranslation */ + GPIO_BASE_SIZE, /* RangeLength _LEN */ + , , + RBL0, + AddressRangeMemory, + ) + }) + CreateQWordField (RBFL, RBL0._MIN, CML0) + CreateQWordField (RBFL, RBL0._MAX, CMX0) + CML0 = PCRB (Arg0) + CMX0 = CML0 + GPIO_BASE_SIZE - 1 + Return (RBFL) +} + +/* GPIO Community 0: GPP_V, GPP_C */ +Device (GPI0) +{ + Name (_HID, ACPI_GPIO_HID) + Name (_CID, ACPI_GPIO_CID) + Name (_UID, GPP_COMM0_ID) + Name (_DDN, "GPIO Controller 0") + + Method (_CRS, 0, NotSerialized) + { + Return (^^GCRS (PID_GPIOCOM0)) + } + + Name (_DSD, Package (0x04) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x08) + { + Package (0x02) + { + "intc-gpio-sw-revision", + GPIO_SW_REVISION + }, + + Package (0x02) + { + "intc-gpio-community-name", + GPP_COMM0_NAME + }, + + Package (0x02) + { + "intc-gpio-group-count", + NUM_COM0_GROUPS + }, + + Package (0x02) + { + "intc-gpio-pad-ownership-offset", + PAD_OWN_REG_0 + }, + + Package (0x02) + { + "intc-gpio-pad-configuration-lock-offset", + PAD_CFG_LOCK_REG_0 + }, + + Package (0x02) + { + "intc-gpio-host-software-pad-ownership-offset", + HOSTSW_OWN_REG_0 + }, + + Package (0x02) + { + "intc-gpio-gpi-interrupt-status-offset", + GPI_INT_STS_0 + }, + + Package (0x02) + { + "intc-gpio-gpi-interrupt-enable-offset", + GPI_INT_EN_0 + } + }, + + ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package (0x02) + { + Package (0x02) + { + "intc-gpio-group-0-subproperties", + GPPV + }, + + Package (0x02) + { + "intc-gpio-group-1-subproperties", + GPPC + } + } + }) + + /* first bank/group in community 0: GPP_V */ + Name (GPPV, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_V_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_V_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_V_START_OFFSET + } + } + }) + + /* 2nd bank/group in community 0: GPP_C */ + Name (GPPC, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_C_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_C_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_C_START_OFFSET + } + } + }) + + Method (_STA, 0, NotSerialized) + { + Return (0xF) + } +} + +/* GPIO Community 1: GPP_F, GPP_E */ +Device (GPI1) +{ + Name (_HID, ACPI_GPIO_HID) + Name (_CID, ACPI_GPIO_CID) + Name (_UID, GPP_COMM1_ID) + Name (_DDN, "GPIO Controller 1") + + Method (_CRS, 0, NotSerialized) + { + Return (^^GCRS (PID_GPIOCOM1)) + } + + Name (_DSD, Package (0x04) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x08) + { + Package (0x02) + { + "intc-gpio-sw-revision", + GPIO_SW_REVISION + }, + + Package (0x02) + { + "intc-gpio-community-name", + GPP_COMM1_NAME + }, + + Package (0x02) + { + "intc-gpio-group-count", + NUM_COM1_GROUPS + }, + + Package (0x02) + { + "intc-gpio-pad-ownership-offset", + PAD_OWN_REG_0 + }, + + Package (0x02) + { + "intc-gpio-pad-configuration-lock-offset", + PAD_CFG_LOCK_REG_0 + }, + + Package (0x02) + { + "intc-gpio-host-software-pad-ownership-offset", + HOSTSW_OWN_REG_0 + }, + + Package (0x02) + { + "intc-gpio-gpi-interrupt-status-offset", + GPI_INT_STS_0 + }, + + Package (0x02) + { + "intc-gpio-gpi-interrupt-enable-offset", + GPI_INT_EN_0 + } + }, + + ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package (0x02) + { + Package (0x02) + { + "intc-gpio-group-0-subproperties", + GPPF + }, + + Package (0x02) + { + "intc-gpio-group-1-subproperties", + GPPE + }, + + } + }) + /* first bank/group in community 1: GPP_F */ + Name (GPPF, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_F_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_F_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_F_START_OFFSET + } + } + }) + /* 2nd bank/group in community 1: GPP_E */ + Name (GPPE, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_E_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_E_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_E_START_OFFSET + } + } + }) + Method (_STA, 0, NotSerialized) + { + Return (0xF) + } +} + +/* GPIO Community 3: CPUJTAG, GPP_H, GPP_A, VGPIO3 */ +Device (GPI3) +{ + Name (_HID, ACPI_GPIO_HID) + Name (_CID, ACPI_GPIO_CID) + Name (_UID, GPP_COMM3_ID) + Name (_DDN, "GPIO Controller 2") + + Method (_CRS, 0, NotSerialized) + { + Return (^^GCRS (PID_GPIOCOM3)) + } + + Name (_DSD, Package (0x04) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x08) + { + Package (0x02) + { + "intc-gpio-sw-revision", + GPIO_SW_REVISION + }, + + Package (0x02) + { + "intc-gpio-community-name", + GPP_COMM3_NAME + }, + + Package (0x02) + { + "intc-gpio-group-count", + NUM_COM3_GROUPS + }, + + Package (0x02) + { + "intc-gpio-pad-ownership-offset", + PAD_OWN_REG_0 + }, + + Package (0x02) + { + "intc-gpio-pad-configuration-lock-offset", + PAD_CFG_LOCK_REG_0 + }, + + Package (0x02) + { + "intc-gpio-host-software-pad-ownership-offset", + HOSTSW_OWN_REG_0 + }, + + Package (0x02) + { + "intc-gpio-gpi-interrupt-status-offset", + GPI_INT_STS_0 + }, + + Package (0x02) + { + "intc-gpio-gpi-interrupt-enable-offset", + GPI_INT_EN_0 + } + }, + + ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package (0x04) + { + Package (0x02) + { + "intc-gpio-group-0-subproperties", + JTAG + }, + + Package (0x02) + { + "intc-gpio-group-1-subproperties", + GPPH + }, + + Package (0x02) + { + "intc-gpio-group-2-subproperties", + GPPA + }, + + Package (0x02) + { + "intc-gpio-group-3-subproperties", + VGP3 + } + } + }) + /* first bank/group in community 3: CPUJTAG */ + Name (JTAG, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_CPUJTAG_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_CPUJTAG_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_CPUJTAG_START_OFFSET + } + } + }) + /* 2nd bank/group in community 3: GPP_H */ + Name (GPPH, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_H_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_H_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_H_START_OFFSET + } + } + }) + + /* 3rd bank/group in community 3: GPP_A */ + Name (GPPA, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_A_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_A_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_A_START_OFFSET + } + } + }) + + /* 4th bank/group in community 3: VGPIO3 */ + Name (VGP3, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_VGPIO3_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_VGPIO3_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_VGPIO3_START_OFFSET + } + } + }) + + Method (_STA, 0, NotSerialized) + { + Return (0xF) + } +} + +/* GPIO Community 4: GPP_S */ +Device (GPI4) +{ + Name (_HID, ACPI_GPIO_HID) + Name (_CID, ACPI_GPIO_CID) + Name (_UID, GPP_COMM4_ID) + Name (_DDN, "GPIO Controller 3") + + Method (_CRS, 0, NotSerialized) + { + Return (^^GCRS (PID_GPIOCOM4)) + } + + Name (_DSD, Package (0x04) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x08) + { + Package (0x02) + { + "intc-gpio-sw-revision", + GPIO_SW_REVISION + }, + + Package (0x02) + { + "intc-gpio-community-name", + GPP_COMM4_NAME + }, + + Package (0x02) + { + "intc-gpio-group-count", + NUM_COM4_GROUPS + }, + + Package (0x02) + { + "intc-gpio-pad-ownership-offset", + PAD_OWN_REG_0 + }, + + Package (0x02) + { + "intc-gpio-pad-configuration-lock-offset", + PAD_CFG_LOCK_REG_0 + }, + + Package (0x02) + { + "intc-gpio-host-software-pad-ownership-offset", + HOSTSW_OWN_REG_0 + }, + + Package (0x02) + { + "intc-gpio-gpi-interrupt-status-offset", + GPI_INT_STS_0 + }, + + Package (0x02) + { + "intc-gpio-gpi-interrupt-enable-offset", + GPI_INT_EN_0 + } + }, + + ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package (0x01) + { + Package (0x02) + { + "intc-gpio-group-0-subproperties", + GPPS + } + } + }) + /* only bank/group in community 4: GPP_S */ + Name (GPPS, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_S_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_S_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_S_START_OFFSET + } + } + }) + Method (_STA, 0, NotSerialized) + { + Return (0xF) + } +} + +/* GPIO Community 5: GPP_B, GPP_D, VGPIO */ +Device (GPI5) +{ + Name (_HID, ACPI_GPIO_HID) + Name (_CID, ACPI_GPIO_CID) + Name (_UID, GPP_COMM5_ID) + Name (_DDN, "GPIO Controller 4") + + Method (_CRS, 0, NotSerialized) + { + Return (^^GCRS (PID_GPIOCOM5)) + } + + Name (_DSD, Package (0x04) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x08) + { + Package (0x02) + { + "intc-gpio-sw-revision", + GPIO_SW_REVISION + }, + + Package (0x02) + { + "intc-gpio-community-name", + GPP_COMM5_NAME + }, + + Package (0x02) + { + "intc-gpio-group-count", + NUM_COM5_GROUPS + }, + + Package (0x02) + { + "intc-gpio-pad-ownership-offset", + // 0xD0 + PAD_OWN_REG_0 + }, + + Package (0x02) + { + "intc-gpio-pad-configuration-lock-offset", + PAD_CFG_LOCK_REG_0 + }, + + Package (0x02) + { + "intc-gpio-host-software-pad-ownership-offset", + HOSTSW_OWN_REG_0 + }, + + Package (0x02) + { + "intc-gpio-gpi-interrupt-status-offset", + GPI_INT_STS_0 + }, + + Package (0x02) + { + "intc-gpio-gpi-interrupt-enable-offset", + GPI_INT_EN_0 + } + }, + + ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-0-subproperties", + GPPB + }, + + Package (0x02) + { + "intc-gpio-group-1-subproperties", + GPPD + }, + + Package (0x02) + { + "intc-gpio-group-2-subproperties", + VGP0 + } + } + }) + /* first bank/group in community 5: GPP_B */ + Name (GPPB, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_B_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_B_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_B_START_OFFSET + } + } + }) + /* 2nd bank/group in community 5: GPP_D */ + Name (GPPD, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_D_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_D_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_D_START_OFFSET + } + } + }) + /* 3rd bank/group in community 5: VGPIO */ + Name (VGP0, Package (0x02) + { + ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package (0x03) + { + Package (0x02) + { + "intc-gpio-group-name", + GPP_VGPIO_NAME + }, + + Package (0x02) + { + "intc-gpio-pad-count", + NUM_GRP_VGPIO_PADS + }, + + Package (0x02) + { + "intc-gpio-group-offset", + GPP_VGPIO_START_OFFSET + } + } + }) + + Method (_STA, 0, NotSerialized) + { + Return (0xF) + } +} diff --git a/src/soc/intel/pantherlake/acpi/hda.asl b/src/soc/intel/pantherlake/acpi/hda.asl new file mode 100644 index 0000000..fc6cb4e --- /dev/null +++ b/src/soc/intel/pantherlake/acpi/hda.asl @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* Audio Controller - Device 31, Function 3 */ + +Device (HDAS) +{ + Name (_ADR, 0x001f0003) + Name (_DDN, "Audio Controller") + Name (UUID, ToUUID ("A69F886E-6CEB-4594-A41F-7B5DCE24C553")) + + /* Device is D3 wake capable */ + Name (_S0W, 3) +} diff --git a/src/soc/intel/pantherlake/acpi/pcie.asl b/src/soc/intel/pantherlake/acpi/pcie.asl new file mode 100644 index 0000000..3321335 --- /dev/null +++ b/src/soc/intel/pantherlake/acpi/pcie.asl @@ -0,0 +1,303 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* Intel PCH PCIe support */ + +Method (IRQM, 1, Serialized) { + + /* Interrupt Map INTA->INTA, INTB->INTB, INTC->INTC, INTD->INTD */ + Name (IQAA, Package () { + Package () { 0x0000ffff, 0, 0, 16 }, + Package () { 0x0000ffff, 1, 0, 17 }, + Package () { 0x0000ffff, 2, 0, 18 }, + Package () { 0x0000ffff, 3, 0, 19 } }) + Name (IQAP, Package () { + Package () { 0x0000ffff, 0, 0, 11 }, + Package () { 0x0000ffff, 1, 0, 10 }, + Package () { 0x0000ffff, 2, 0, 11 }, + Package () { 0x0000ffff, 3, 0, 11 } }) + + /* Interrupt Map INTA->INTB, INTB->INTC, INTC->INTD, INTD->INTA */ + Name (IQBA, Package () { + Package () { 0x0000ffff, 0, 0, 17 }, + Package () { 0x0000ffff, 1, 0, 18 }, + Package () { 0x0000ffff, 2, 0, 19 }, + Package () { 0x0000ffff, 3, 0, 16 } }) + Name (IQBP, Package () { + Package () { 0x0000ffff, 0, 0, 10 }, + Package () { 0x0000ffff, 1, 0, 11 }, + Package () { 0x0000ffff, 2, 0, 11 }, + Package () { 0x0000ffff, 3, 0, 11 } }) + + /* Interrupt Map INTA->INTC, INTB->INTD, INTC->INTA, INTD->INTB */ + Name (IQCA, Package () { + Package () { 0x0000ffff, 0, 0, 18 }, + Package () { 0x0000ffff, 1, 0, 19 }, + Package () { 0x0000ffff, 2, 0, 16 }, + Package () { 0x0000ffff, 3, 0, 17 } }) + Name (IQCP, Package () { + Package () { 0x0000ffff, 0, 0, 11 }, + Package () { 0x0000ffff, 1, 0, 11 }, + Package () { 0x0000ffff, 2, 0, 11 }, + Package () { 0x0000ffff, 3, 0, 10 } }) + + /* Interrupt Map INTA->INTD, INTB->INTA, INTC->INTB, INTD->INTC */ + Name (IQDA, Package () { + Package () { 0x0000ffff, 0, 0, 19 }, + Package () { 0x0000ffff, 1, 0, 16 }, + Package () { 0x0000ffff, 2, 0, 17 }, + Package () { 0x0000ffff, 3, 0, 18 } }) + Name (IQDP, Package () { + Package () { 0x0000ffff, 0, 0, 11 }, + Package () { 0x0000ffff, 1, 0, 11 }, + Package () { 0x0000ffff, 2, 0, 10 }, + Package () { 0x0000ffff, 3, 0, 11 } }) + + Switch (ToInteger (Arg0)) + { + Case (Package () { 1, 5, 9, 13 }) { + If (PICM) { + Return (IQAA) + } Else { + Return (IQAP) + } + } + + Case (Package () { 2, 6, 10, 14 }) { + If (PICM) { + Return (IQBA) + } Else { + Return (IQBP) + } + } + + Case (Package () { 3, 7, 11, 15 }) { + If (PICM) { + Return (IQCA) + } Else { + Return (IQCP) + } + } + + Case (Package () { 4, 8, 12, 16 }) { + If (PICM) { + Return (IQDA) + } Else { + Return (IQDP) + } + } + + Default { + If (PICM) { + Return (IQDA) + } Else { + Return (IQDP) + } + } + } +} + +Device (RP01) +{ + Name (_ADR, 0x001C0000) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP02) +{ + Name (_ADR, 0x001C0001) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP03) +{ + Name (_ADR, 0x001C0002) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP04) +{ + Name (_ADR, 0x001C0003) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP05) +{ + Name (_ADR, 0x001C0004) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP06) +{ + Name (_ADR, 0x001C0005) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP07) +{ + Name (_ADR, 0x001C0006) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP08) +{ + Name (_ADR, 0x001C0007) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP09) +{ + Name (_ADR, 0x00060000) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP10) +{ + Name (_ADR, 0x00060001) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +#if CONFIG(SOC_INTEL_PANTHERLAKE_H) +Device (RP11) +{ + Name (_ADR, 0x00060002) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP12) +{ + Name (_ADR, 0x00060003) + + OperationRegion (RPCS, PCI_Config, 0x4c, 4) + Field (RPCS, AnyAcc, NoLock, Preserve) + { + , 24, + RPPN, 8, /* Root Port Number */ + } + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} +#endif diff --git a/src/soc/intel/pantherlake/acpi/serialio.asl b/src/soc/intel/pantherlake/acpi/serialio.asl new file mode 100644 index 0000000..1571f5e --- /dev/null +++ b/src/soc/intel/pantherlake/acpi/serialio.asl @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* Intel Serial IO Devices */ + +Device (I2C0) +{ + Name (_ADR, 0x00150000) + Name (_DDN, "Serial IO I2C Controller 0") +} + +Device (I2C1) +{ + Name (_ADR, 0x00150001) + Name (_DDN, "Serial IO I2C Controller 1") +} + +Device (I2C2) +{ + Name (_ADR, 0x00150002) + Name (_DDN, "Serial IO I2C Controller 2") +} + +Device (I2C3) +{ + Name (_ADR, 0x00150003) + Name (_DDN, "Serial IO I2C Controller 3") +} + +Device (I2C4) +{ + Name (_ADR, 0x00190000) + Name (_DDN, "Serial IO I2C Controller 4") +} + +Device (I2C5) +{ + Name (_ADR, 0x00190001) + Name (_DDN, "Serial IO I2C Controller 5") +} + +Device (FSPI) +{ + Name (_ADR, 0x001f0005) + Name (_DDN, "Fast SPI") +} + +Device (SPI0) +{ + Name (_ADR, 0x001e0002) + Name (_DDN, "Serial IO SPI Controller 0") +} + +Device (SPI1) +{ + Name (_ADR, 0x001e0003) + Name (_DDN, "Serial IO SPI Controller 1") +} + +Device (SPI2) +{ + Name (_ADR, 0x00120006) + Name (_DDN, "Serial IO SPI Controller 2") +} + +Device (UAR0) +{ + Name (_ADR, 0x001e0000) + Name (_DDN, "Serial IO UART Controller 0") +} + +Device (UAR1) +{ + Name (_ADR, 0x001e0001) + Name (_DDN, "Serial IO UART Controller 1") +} + +Device (UAR2) +{ + Name (_ADR, 0x00190002) + Name (_DDN, "Serial IO UART Controller 2") +} diff --git a/src/soc/intel/pantherlake/acpi/southbridge.asl b/src/soc/intel/pantherlake/acpi/southbridge.asl new file mode 100644 index 0000000..219a971 --- /dev/null +++ b/src/soc/intel/pantherlake/acpi/southbridge.asl @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <intelblocks/itss.h> +#include <intelblocks/pcr.h> +#include <soc/pcr_ids.h> + +/* PCR access */ +#include <soc/intel/common/acpi/pch_pcr.asl> +/* IOE PCR access */ +#include <soc/intel/common/acpi/ioe_pcr.asl> + +/* PCIE src clock control */ +#include <soc/intel/common/acpi/pcie_clk.asl> + +/* PCH clock */ +#include "camera_clock_ctl.asl" + +/* GPIO controller */ +#include "gpio.asl" + +/* ESPI 0:1f.0 */ +#include <soc/intel/common/block/acpi/acpi/lpc.asl> + +/* PCH HDA */ +#include "hda.asl" + +/* PCIE Ports */ +#include "pcie.asl" + +/* Serial IO */ +#include "serialio.asl" + +/* SMBus 0:1f.4 */ +#include <soc/intel/common/block/acpi/acpi/smbus.asl> + +/* ISH 0:12.0 */ +#if CONFIG(DRIVERS_INTEL_ISH) +#include <soc/intel/common/block/acpi/acpi/ish.asl> +#endif + +/* USB XHCI 0:14.0 */ +#include "xhci.asl" + +/* PCI _OSC */ +#include <soc/intel/common/acpi/pci_osc.asl> + +/* GbE 0:1f.6 */ +#if CONFIG(MAINBOARD_USES_IFD_GBE_REGION) +#include <soc/intel/common/block/acpi/acpi/pch_glan.asl> + +/* UFS 0:17:0 */ +/* TODO: Add ufs.asl entry for PTL-U SKU */ + +#endif diff --git a/src/soc/intel/pantherlake/acpi/tcss.asl b/src/soc/intel/pantherlake/acpi/tcss.asl new file mode 100644 index 0000000..1743b1e --- /dev/null +++ b/src/soc/intel/pantherlake/acpi/tcss.asl @@ -0,0 +1,822 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <intelblocks/tcss.h> +#include <soc/iomap.h> + +/* + * Type C Subsystem(TCSS) topology provides Runtime D3 support for USB host controller(xHCI), + * USB device controller(xDCI), Thunderbolt DMA devices and Thunderbolt PCIe controllers. + * PCIe RP0/RP1 is grouped with DMA0 and PCIe RP2/RP3 is grouped with DMA1. + */ +#define TCSS_TBT_PCIE0_RP0 0 +#define TCSS_TBT_PCIE0_RP1 1 +#define TCSS_TBT_PCIE0_RP2 2 +#define TCSS_TBT_PCIE0_RP3 3 +#define TCSS_XHCI 4 +#define TCSS_XDCI 5 +#define TCSS_DMA0 6 +#define TCSS_DMA1 7 + +/* + * MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE + * Command code 0x15 + * Description: Gateway command for handling TCSS DEVEN clear/restore. + * Field PARAM1[15:8] of the _INTERFACE register is used in this command to select from + * a pre-defined set of subcommands. + */ +#define MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE 0x00000015 +#define TCSS_DEVEN_MAILBOX_SUBCMD_GET_STATUS 0 /* Sub-command 0 */ +#define TCSS_DEVEN_MAILBOX_SUBCMD_TCSS_CHANGE_REQ 1 /* Sub-command 1 */ +#define TCSS_IOM_ACK_TIMEOUT_IN_MS 100 + +#define MCHBAR_TCSS_DEVEN_OFFSET 0x73a8 + +#define REVISION_ID 1 +#define UNRECOGNIZED_UUID 0x4 +#define UNRECOGNIZED_REVISION 0x8 + +#define USB_TUNNELING 0x1 +#define DISPLAY_PORT_TUNNELING 0x2 +#define PCIE_TUNNELING 0x4 +#define INTER_DOMAIN_USB4_INTERNET_PROTOCOL 0x8 + +Scope (\_SB) +{ + /* Device base address */ + Method (BASE, 1) + { + Local0 = Arg0 & 0x7 /* Function number */ + Local1 = (Arg0 >> 16) & 0x1F /* Device number */ + Local2 = (Local0 << 12) + (Local1 << 15) + Local3 = \_SB.PCI0.GPCB() + Local2 + Return (Local3) + } + + /* + * Define PCH ACPIBASE IO as an ACPI operating region. The base address can be + * found in Device 31, Function 2, Offset 40h. + */ + OperationRegion (PMIO, SystemIO, ACPI_BASE_ADDRESS, 0x80) + Field (PMIO, ByteAcc, NoLock, Preserve) { + Offset(0x6c), /* 0x6C, General Purpose Event 0 Status [127:96] */ + , 19, + CPWS, 1, /* CPU WAKE STATUS */ + Offset(0x7c), /* 0x7C, General Purpose Event 0 Enable [127:96] */ + , 19, + CPWE, 1 /* CPU WAKE EN */ + } + + Name (C2PW, 0) /* Set default value to 0. */ + + /* + * C2PM (CPU to PCH Method) + * + * This object is Enable/Disable GPE_CPU_WAKE_EN. + * Arguments: (4) + * Arg0 - An Integer containing the device wake capability + * Arg1 - An Integer containing the target system state + * Arg2 - An Integer containing the target device state + * Arg3 - An Integer containing the request device type + * Return Value: + * return 0 + */ + Method (C2PM, 4, NotSerialized) + { + Local0 = 1 << Arg3 + /* This method is used to enable/disable wake from Tcss Device (WKEN). */ + If (Arg0 && Arg1) + { /* If entering Sx and enabling wake, need to enable WAKE capability. */ + If (CPWE == 0) { /* If CPU WAKE EN is not set, Set it. */ + If (CPWS) { /* If CPU WAKE STATUS is set, Clear it. */ + /* Clear CPU WAKE STATUS by writing 1. */ + CPWS = 1 + } + CPWE = 1 /* Set CPU WAKE EN by writing 1. */ + } + If ((C2PW & Local0) == 0) { + /* Set Corresponding Device En BIT in C2PW. */ + C2PW |= Local0 + } + } Else { /* If Staying in S0 or Disabling Wake. */ + If (Arg0 || Arg2) { /* Check if Exiting D0 and arming for wake. */ + /* If CPU WAKE EN is not set, Set it. */ + If (CPWE == 0) { + /* If CPU WAKE STATUS is set, Clear it. */ + If (CPWS) { + /* Clear CPU WAKE STATUS by writing 1. */ + CPWS = 1 + } + CPWE = 1 /* Set CPU WAKE EN by writing 1. */ + } + If ((C2PW & Local0) == 0) { + /* Set Corresponding Device En BIT in C2PW. */ + C2PW |= Local0 + } + } Else { + /* + * Disable runtime PME, either because staying in D0 or + * disabling wake. + */ + If ((C2PW & Local0) != 0) { + /* + * Clear Corresponding Device En BIT in C2PW. + */ + C2PW &= ~Local0 + } + If ((CPWE != 0) && (C2PW == 0)) { + /* + * If CPU WAKE EN is set, Clear it. Clear CPU WAKE EN + * by writing 0. + */ + CPWE = 0 + } + } + } + Return (0) + } + + Method (_OSC, 4, Serialized) + { + CreateDWordField (Arg3, 0, CDW1) + If (Arg0 == ToUUID("0811B06E-4A27-44F9-8D60-3CBBC22E7B48")) { + /* Platform-Wide _OSC Capabilities + * Arg0: UUID = {0811B06E-4A27-44F9-8D60-3CBBC22E7B48} + * Arg1: Revision ID = 1 + * Arg2: Count of entries (DWORD) in Arge3 (Integer): 3 + * Arg3: DWORD capabilities buffer: + * First DWORD: The standard definition bits are used to return errors. + * Second DWORD: See ACPI specification Platform-Wide _OSC Capabilities + * DWORD2 table for Bits 0-17. Bit 18 is newly defined as native USB4 + * support. The OS sets this bit to indicate support for an OSPM-native + * USB4 Connection Manager which handles USB4 connection events and + * link management. + */ + If (Arg1 != REVISION_ID) { + CDW1 |= UNRECOGNIZED_REVISION + } + Return (Arg3) +#if CONFIG(SOFTWARE_CONNECTION_MANAGER) + /* + * Software Connection Manager doesn't work with Linux 5.13 or later and + * results in TBT ports timing out. Not advertising this results in + * Firmware Connection Manager being used and TBT works correctly. + */ + } ElseIf (Arg0 == ToUUID("23A0D13A-26AB-486C-9C5F-0FFA525A575A")) { + /* + * Operating System Capabilities for USB4 + * Arg0: UUID = {23A0D13A-26AB-486C-9C5F-0FFA525A575A} + * Arg1: Revision ID = 1 + * Arg2: Count of entries (DWORD) in Arg3 (Integer): 3 + * Arg3: DWORD capabilities buffer: + * First DWORD: The standard definition bits are used to return errors. + * Second DWORD: OSPM support field for USB4, bits [31:0] reserved. + * Third DWORD: OSPM control field for USB4. + * bit 0: USB tunneling + * bit 1: DisplayPort tunneling + * bit 2: PCIe tunneling + * bit 3: Inter-domain USB4 internet protocol + * bit 31:4: reserved + * Return: The platform acknowledges the capabilities buffer by + * returning a buffer of DWORD of the same length. Masked/Cleared bits + * in the control field indicate that the platform does not permit OSPM + * control of the respectively capabilities or features. + */ + CreateDWordField (Arg3, 8, CDW3) + Local0 = CDW3 + + If (Arg1 != REVISION_ID) { + CDW1 |= UNRECOGNIZED_REVISION + Return (Arg3) + } + Local0 |= USB_TUNNELING | DISPLAY_PORT_TUNNELING | PCIE_TUNNELING | + INTER_DOMAIN_USB4_INTERNET_PROTOCOL + CDW3 = Local0 + Return (Arg3) +#endif + } Else { + CDW1 |= UNRECOGNIZED_UUID + Return (Arg3) + } + } +} + +Scope (_GPE) +{ + /* TCSS PCI Express Hot-Plug wake event */ + Method (_L77, 0, NotSerialized) + { + /* + * Delay for 100ms to meet the timing requirements of the PCI Express Base + * Specification, Revision 1.0A, Section 6.6 ("...software must wait at least + * 100ms from the end of reset of one or more device before it is permitted + * to issue Configuration Requests to those devices"). + */ + Sleep (100) + + If (CondRefOf (\_SB.PCI0.TXHC)) { + /* Invoke PCIe root ports wake event handler */ + \_SB.PCI0.TRP0.HPEV() + \_SB.PCI0.TRP1.HPEV() + \_SB.PCI0.TRP2.HPEV() + \_SB.PCI0.TRP3.HPEV() + } + + /* Check Root Port 0 for a Hot Plug Event if the port is enabled */ + If (((\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP0.HPSX)) { + If (\_SB.PCI0.TRP0.PDCX) { + /* Clear all status bits */ + \_SB.PCI0.TRP0.PDCX = 1 + \_SB.PCI0.TRP0.HPSX = 1 + /* + * Intercept Presence Detect Changed interrupt and make sure + * the L0s is disabled on empty slots. + */ + If (!\_SB.PCI0.TRP0.PDSX) { + /* + * The PCIe slot is empty, so disable L0s on hot unplug. + */ + \_SB.PCI0.TRP0.L0SE = 0 + } + /* Performs proper notification to the OS. */ + Notify (\_SB.PCI0.TRP0, 0) + } Else { + /* False event. Clear Hot-Plug status, then exit. */ + \_SB.PCI0.TRP0.HPSX = 1 + } + } + + /* Check Root Port 1 for a Hot Plug Event if the port is enabled */ + If (((\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP1.HPSX)) { + If (\_SB.PCI0.TRP1.PDCX) { + \_SB.PCI0.TRP1.PDCX = 1 + \_SB.PCI0.TRP1.HPSX = 1 + If (!\_SB.PCI0.TRP1.PDSX) { + \_SB.PCI0.TRP1.L0SE = 0 + } + Notify (\_SB.PCI0.TRP1, 0) + } Else { + \_SB.PCI0.TRP1.HPSX = 1 + } + } + + /* Check Root Port 2 for a Hot Plug Event if the port is enabled */ + If (((\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP2.HPSX)) { + If (\_SB.PCI0.TRP2.PDCX) { + \_SB.PCI0.TRP2.PDCX = 1 + \_SB.PCI0.TRP2.HPSX = 1 + If (!\_SB.PCI0.TRP2.PDSX) { + \_SB.PCI0.TRP2.L0SE = 0 + } + Notify (\_SB.PCI0.TRP2, 0) + } Else { + \_SB.PCI0.TRP2.HPSX = 1 + } + } + + /* Check Root Port 3 for a Hot Plug Event if the port is enabled */ + If (((\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP3.HPSX)) { + If (\_SB.PCI0.TRP3.PDCX) { + \_SB.PCI0.TRP3.PDCX = 1 + \_SB.PCI0.TRP3.HPSX = 1 + If (!\_SB.PCI0.TRP3.PDSX) { + \_SB.PCI0.TRP3.L0SE = 0 + } + Notify (\_SB.PCI0.TRP3, 0) + } Else { + \_SB.PCI0.TRP3.HPSX = 1 + } + } + } + + /* TCSS PCI Express power management event */ + Method (_L76, 0, Serialized) + { + If (CondRefOf (\_SB.PCI0.TXHC)) { + If (\_SB.PCI0.TRP0.HPME() == 1) { + Notify (\_SB.PCI0.TDM0, 0x2) + Notify (\_SB.PCI0.TRP0, 0x2) + } + + If (\_SB.PCI0.TRP1.HPME() == 1) { + Notify (\_SB.PCI0.TDM0, 0x2) + Notify (\_SB.PCI0.TRP1, 0x2) + } + + If (\_SB.PCI0.TRP2.HPME() == 1) { + Notify (\_SB.PCI0.TDM1, 0x2) + Notify (\_SB.PCI0.TRP2, 0x2) + } + + If (\_SB.PCI0.TRP3.HPME() == 1) { + Notify (\_SB.PCI0.TDM1, 0x2) + Notify (\_SB.PCI0.TRP3, 0x2) + } + } + + /* Invoke PCIe root ports power management status handler */ + \_SB.PCI0.TRP0.HPME() + \_SB.PCI0.TRP1.HPME() + \_SB.PCI0.TRP2.HPME() + \_SB.PCI0.TRP3.HPME() + } +} + +Scope (\_SB.PCI0) +{ + Device (IOM) + { + Name (_HID, "INTC107A") + Name (_DDN, "Intel(R) Panther Lake Input Output Manager(IOM) driver") + /* IOM preserved MMIO range from 0x3fff0aa0000 to 0x3fff0aa15ff. */ + Name (_CRS, ResourceTemplate () { + QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + NonCacheable, ReadWrite, 0x0, + IOM_BASE_ADDR, IOM_BASE_ADDR_MAX, 0x0, + IOM_BASE_SIZE,,,) + }) + /* Hide the device so that Windows does not complain on missing driver */ + Name (_STA, 0xB) + } + + /* + * Operation region defined to access the TCSS_DEVEN. Get the MCHBAR in offset + * 0x48 in B0:D0:F0. TCSS device enable base address is in offset 0x7090 of MCHBAR. + */ + OperationRegion (TDEN, SystemMemory, (GMHB() + MCHBAR_TCSS_DEVEN_OFFSET), 0x4) + Field (TDEN, ByteAcc, NoLock, Preserve) + { + TRE0, 1, /* PCIE0_EN */ + TRE1, 1, /* PCIE1_EN */ + TRE2, 1, /* PCIE2_EN */ + TRE3, 1, /* PCIE3_EN */ + , 4, + THCE, 1, /* XHCI_EN */ + TDCE, 1, /* XDCI_EN */ + DME0, 1, /* TBT_DMA0_EN */ + DME1, 1, /* TBT_DMA1_EN */ + , 20 + } + + /* + * Operation region defined to access the pCode mailbox interface. Get the MCHBAR + * in offset 0x48 in B0:D0:F0. MMIO address is in offset 0x5DA0 of MCHBAR. + */ + OperationRegion (PBAR, SystemMemory, (GMHB() + 0x5DA0), 0x08) + Field (PBAR, DWordAcc, NoLock, Preserve) + { + PMBD, 32, /* pCode MailBox Data, offset 0x5DA0 in MCHBAR */ + PMBC, 8, /* pCode MailBox Command, [7:0] of offset 0x5DA4 in MCHBAR */ + PSCM, 8, /* pCode MailBox Sub-Command, [15:8] of offset 0x5DA4 in MCHBAR */ + , 15, /* Reserved */ + PMBR, 1 /* pCode MailBox RunBit, [31:31] of offset 0x5DA4 in MCHBAR */ + } + + /* + * Poll pCode MailBox Ready + * + * Return 0xFF - Timeout + * 0x00 - Ready + */ + Method (PMBY, 0) + { + Local0 = 0 + While (PMBR && (Local0 < 1000)) { + Local0++ + Stall (1) + } + If (Local0 == 1000) { + Printf("Timeout occurred.") + Return (0xFF) + } + Return (0) + } + + + /* From RegBar Base, IOM_TypeC_SW_configuration_1 is at offset 0x40 */ + OperationRegion (IOMR, SystemMemory, IOM_BASE_ADDR, 0x100) + Field (IOMR, DWordAcc, NoLock, Preserve) + { + Offset(0x40), + , 15, + TD3C, 1, /* [15:15] Type C D3 cold bit */ + TACK, 1, /* [16:16] IOM Acknowledge bit */ + DPOF, 1, /* [17:17] Set 1 to indicate IOM, all the */ + /* display is OFF, clear otherwise */ + Offset(0x44), /* SW_CONFIG_2 */ + DPHD, 1, /* [0:0] DP_ALT and DP Tunneling HPD assertion */ + Offset(0x48), /* SW_CONFIG_3 */ + , 12, + INDP, 1, /* [12:12] The capability of monitoring the DP_ALT and DP tunneling */ + Offset(0x70), /* Physical addr is offset 0x70. */ + IMCD, 32, /* R_SA_IOM_BIOS_MAIL_BOX_CMD */ + IMDA, 32 /* R_SA_IOM_BIOS_MAIL_BOX_DATA */ + } + + /* + * TBT Group0 ON method + */ + Method (TG0N, 0) + { + If (\_SB.PCI0.TDM0.VDID == 0xFFFFFFFF) { + Printf("TDM0 does not exist.") + } Else { + If (\_SB.PCI0.TDM0.STAT == 0) { + /* DMA0 is in D3Cold early. */ + \_SB.PCI0.TDM0.D3CX() /* RTD3 Exit */ + + Printf("Bring TBT RPs out of D3Code.") + If (\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) { + /* RP0 D3 cold exit. */ + \_SB.PCI0.TRP0.D3CX() + } + If (\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) { + /* RP1 D3 cold exit. */ + \_SB.PCI0.TRP1.D3CX() + } + } Else { + Printf("Drop TG0N due to it is already exit D3 cold.") + } + + /* TBT RTD3 exit 10ms delay. */ + Sleep (10) + } + } + + /* + * TBT Group0 OFF method + */ + Method (TG0F, 0) + { + If (\_SB.PCI0.TDM0.VDID == 0xFFFFFFFF) { + Printf("TDM0 does not exist.") + } Else { + If (\_SB.PCI0.TDM0.STAT == 1) { + /* DMA0 is not in D3Cold now. */ + \_SB.PCI0.TDM0.D3CE() /* Enable DMA RTD3 */ + + Printf("Push TBT RPs to D3Cold together") + If (\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) { + /* Put RP0 to D3 cold. */ + \_SB.PCI0.TRP0.D3CE() + } + If (\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) { + /* Put RP1 to D3 cold. */ + \_SB.PCI0.TRP1.D3CE() + } + } + } + } + + /* + * TBT Group1 ON method + */ + Method (TG1N, 0) + { + If (\_SB.PCI0.TDM1.VDID == 0xFFFFFFFF) { + Printf("TDM1 does not exist.") + } Else { + If (\_SB.PCI0.TDM1.STAT == 0) { + /* DMA1 is in D3Cold early. */ + \_SB.PCI0.TDM1.D3CX() /* RTD3 Exit */ + + Printf("Bring TBT RPs out of D3Code.") + If (\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) { + /* RP2 D3 cold exit. */ + \_SB.PCI0.TRP2.D3CX() + } + If (\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) { + /* RP3 D3 cold exit. */ + \_SB.PCI0.TRP3.D3CX() + } + } Else { + Printf("Drop TG1N due to it is already exit D3 cold.") + } + + /* TBT RTD3 exit 10ms delay. */ + Sleep (10) + } + } + + /* + * TBT Group1 OFF method + */ + Method (TG1F, 0) + { + If (\_SB.PCI0.TDM1.VDID == 0xFFFFFFFF) { + Printf("TDM1 does not exist.") + } Else { + If (\_SB.PCI0.TDM1.STAT == 1) { + /* DMA1 is not in D3Cold now */ + \_SB.PCI0.TDM1.D3CE() /* Enable DMA RTD3. */ + + Printf("Push TBT RPs to D3Cold together") + If (\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) { + /* Put RP2 to D3 cold. */ + \_SB.PCI0.TRP2.D3CE() + } + If (\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) { + /* Put RP3 to D3 cold */ + \_SB.PCI0.TRP3.D3CE() + } + } + } + } + + PowerResource (TBT0, 5, 1) + { + Method (_STA, 0) + { + Return (\_SB.PCI0.TDM0.STAT) + } + + Method (_ON, 0) + { + TG0N() + } + + Method (_OFF, 0) + { + If (\_SB.PCI0.TDM0.SD3C == 0) { + TG0F() + } + } + } + + PowerResource (TBT1, 5, 1) + { + Method (_STA, 0) + { + Return (\_SB.PCI0.TDM1.STAT) + } + + Method (_ON, 0) + { + TG1N() + } + + Method (_OFF, 0) + { + If (\_SB.PCI0.TDM1.SD3C == 0) { + TG1F() + } + } + } + +#if CONFIG(D3COLD_SUPPORT) + Method (TCON, 0) + { + /* Reset IOM D3 cold bit if it is in D3 cold now. */ + If (TD3C == 1) /* It was in D3 cold before. */ + { + /* Reset IOM D3 cold bit. */ + TD3C = 0 /* Request IOM for D3 cold exit sequence. */ + Local0 = 0 /* Time check counter variable */ + /* Wait for ack, the maximum wait time for the ack is 100 msec. */ + While ((TACK != 0) && (Local0 < TCSS_IOM_ACK_TIMEOUT_IN_MS)) { + /* + * Wait in this loop until TACK becomes 0 with timeout + * TCSS_IOM_ACK_TIMEOUT_IN_MS by default. + */ + Sleep (1) /* Delay of 1ms. */ + Local0++ + } + + If (Local0 == TCSS_IOM_ACK_TIMEOUT_IN_MS) { + Printf("Error: Timeout occurred.") + } + Else + { + Printf("TCSS D3 exit."); + } + } + Else { + Printf("Drop TCON due to it is already exit D3 cold.") + } + } + + Method (TCOF, 0) + { + If ((\_SB.PCI0.TXHC.SD3C != 0) || (\_SB.PCI0.TDM0.SD3C != 0) + || (\_SB.PCI0.TDM1.SD3C != 0)) + { + Printf("Skip D3C entry.") + Return + } + + /* Request IOM for D3 cold entry sequence. */ + TD3C = 1 + } + + PowerResource (D3C, 5, 0) + { + /* + * Variable to save power state + * 1 - TC Cold request cleared. + * 0 - TC Cold request sent. + */ + Name (STAT, 0x1) + + Method (_STA, 0) + { + Return (STAT) + } + + Method (_ON, 0) + { + \_SB.PCI0.TCON() + STAT = 1 + } + + Method (_OFF, 0) + { + \_SB.PCI0.TCOF() + STAT = 0 + } + } +#endif // D3COLD_SUPPORT + + /* + * TCSS xHCI device + */ + Device (TXHC) + { + Name (_ADR, 0x000D0000) + Name (_DDN, "North XHCI controller") + Name (_STR, Unicode ("North XHCI controller")) + Name (DCPM, TCSS_XHCI) + + Method (_STA, 0x0, NotSerialized) + { + If (THCE == 1) { + Return (0x0F) + } Else { + Return (0x0) + } + } + #include "tcss_xhci.asl" + } + + /* + * TCSS DMA0 device + */ + Device (TDM0) + { + Name (_ADR, 0x000D0002) + Name (_DDN, "TBT DMA0 controller") + Name (_STR, Unicode ("TBT DMA0 controller")) + Name (DUID, 0) /* TBT DMA number */ + Name (DCPM, TCSS_DMA0) + + Method (_STA, 0x0, NotSerialized) + { + If (DME0 == 1) { + Return (0x0F) + } Else { + Return (0x0) + } + } + #include "tcss_dma.asl" + } + + /* + * TCSS DMA1 device + */ + Device (TDM1) + { + Name (_ADR, 0x000D0003) + Name (_DDN, "TBT DMA1 controller") + Name (_STR, Unicode ("TBT DMA1 controller")) + Name (DUID, 1) /* TBT DMA number */ + Name (DCPM, TCSS_DMA1) + + Method (_STA, 0x0, NotSerialized) + { + If (DME1 == 1) { + Return (0x0F) + } Else { + Return (0x0) + } + } + #include "tcss_dma.asl" + } + + /* + * TCSS PCIE Root Port #00 + */ + Device (TRP0) + { + Name (_ADR, 0x00070000) + Name (TUID, 0) /* TBT PCIE RP Number 0 for RP00 */ + Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ + Name (LMSL, 0) /* PCIE LTR max snoop Latency */ + Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ + Name (DCPM, TCSS_TBT_PCIE0_RP0) + + Method (_STA, 0x0, NotSerialized) + { + If (VDID != 0xFFFFFFFF) { + Return (0x0F) + } Else { + Return (0x0) + } + } + + Method (_INI) + { + LTEN = 0 + LMSL = 0x88C8 + LNSL = 0x88C8 + } + #include "tcss_pcierp.asl" + } + + /* + * TCSS PCIE Root Port #01 + */ + Device (TRP1) + { + Name (_ADR, 0x00070001) + Name (TUID, 1) /* TBT PCIE RP Number 1 for RP01 */ + Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ + Name (LMSL, 0) /* PCIE LTR max snoop Latency */ + Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ + Name (DCPM, TCSS_TBT_PCIE0_RP1) + + Method (_STA, 0x0, NotSerialized) + { + If (VDID != 0xFFFFFFFF) { + Return (0x0F) + } Else { + Return (0x0) + } + } + + Method (_INI) + { + LTEN = 0 + LMSL = 0x88C8 + LNSL = 0x88C8 + } + #include "tcss_pcierp.asl" + } + + /* + * TCSS PCIE Root Port #02 + */ + Device (TRP2) + { + Name (_ADR, 0x00070002) + Name (TUID, 2) /* TBT PCIE RP Number 2 for RP02 */ + Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ + Name (LMSL, 0) /* PCIE LTR max snoop Latency */ + Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ + Name (DCPM, TCSS_TBT_PCIE0_RP2) + + Method (_STA, 0x0, NotSerialized) + { + If (VDID != 0xFFFFFFFF) { + Return (0x0F) + } Else { + Return (0x0) + } + } + + Method (_INI) + { + LTEN = 0 + LMSL = 0x88C8 + LNSL = 0x88C8 + } + #include "tcss_pcierp.asl" + } + + /* + * TCSS PCIE Root Port #03 + */ + Device (TRP3) + { + Name (_ADR, 0x00070003) + Name (TUID, 3) /* TBT PCIE RP Number 3 for RP03 */ + Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ + Name (LMSL, 0) /* PCIE LTR max snoop Latency */ + Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ + Name (DCPM, TCSS_TBT_PCIE0_RP3) + + Method (_STA, 0x0, NotSerialized) + { + If (VDID != 0xFFFFFFFF) { + Return (0x0F) + } Else { + Return (0x0) + } + } + + Method (_INI) + { + LTEN = 0 + LMSL = 0x88C8 + LNSL = 0x88C8 + } + #include "tcss_pcierp.asl" + } +} diff --git a/src/soc/intel/pantherlake/acpi/tcss_dma.asl b/src/soc/intel/pantherlake/acpi/tcss_dma.asl new file mode 100644 index 0000000..5b6e890 --- /dev/null +++ b/src/soc/intel/pantherlake/acpi/tcss_dma.asl @@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +OperationRegion (DPME, SystemMemory, BASE(_ADR), 0x100) +Field (DPME, AnyAcc, NoLock, Preserve) +{ + VDID, 32, + Offset(0x84), /* 0x84, DMA CFG PM CAP */ + PMST, 2, /* 1:0, PM_STATE */ + , 6, + PMEE, 1, /* 8, PME_EN */ + , 6, + PMES, 1, /* 15, PME_STATUS */ + Offset(0xc8), /* 0xC8, TBT NVM FW Revision */ + , 31, + INFR, 1, /* TBT NVM FW Ready */ + Offset(0xec), /* 0xEC, TBT TO PCIE Register */ + TB2P, 32, /* TBT to PCIe */ + P2TB, 32, /* PCIe to TBT */ + Offset(0xfc), /* 0xFC, DMA RTD3 Force Power */ + DD3E, 1, /* 0:0 DMA RTD3 Enable */ + DFPE, 1, /* 1:1 DMA Force Power */ + Offset (0xff), + DMAD, 8 /* 31:24 DMA Active Delay */ +} + +Name (STAT, 0x1) /* Variable to save power state 1 - D0, 0 - D3C */ + +Method (_S0W, 0x0) +{ +#if CONFIG(D3COLD_SUPPORT) + Return (0x04) +#else + Return (0x03) +#endif // D3COLD_SUPPORT +} + +/* + * Get power resources that are dependent on this device for Operating System Power Management + * to put the device in the D0 device state + */ +Method (_PR0) +{ +#if CONFIG(D3COLD_SUPPORT) + If (DUID == 0) { + Return (Package() { \_SB.PCI0.D3C, \_SB.PCI0.TBT0 }) + } Else { + Return (Package() { \_SB.PCI0.D3C, \_SB.PCI0.TBT1 }) + } +#else + If (DUID == 0) { + Return (Package() { \_SB.PCI0.TBT0 }) + } Else { + Return (Package() { \_SB.PCI0.TBT1 }) + } +#endif // D3COLD_SUPPORT +} + +Method (_PR3) +{ +#if CONFIG(D3COLD_SUPPORT) + If (DUID == 0) { + Return (Package() { \_SB.PCI0.D3C, \_SB.PCI0.TBT0 }) + } Else { + Return (Package() { \_SB.PCI0.D3C, \_SB.PCI0.TBT1 }) + } +#else + If (DUID == 0) { + Return (Package() { \_SB.PCI0.TBT0 }) + } Else { + Return (Package() { \_SB.PCI0.TBT1 }) + } +#endif // D3COLD_SUPPORT +} + +/* + * RTD3 Exit Method to bring TBT controller out of RTD3 mode. + */ +Method (D3CX, 0, Serialized) +{ + DD3E = 0x00 /* Disable DMA RTD3 */ + STAT = 0x01 +} + +/* + * RTD3 Entry method to enable TBT controller RTD3 mode. + */ +Method (D3CE, 0, Serialized) +{ + DD3E = 0x01 /* Enable DMA RTD3 */ + STAT = 0x00 +} + +/* + * Variable to skip TCSS/TBT D3 cold; 1+: Skip D3CE, 0 - Enable D3CE + * TCSS D3 Cold and TBT RTD3 is only available when system power state is in S0. + */ +Name (SD3C, 0) + +Method (_DSW, 3) +{ + /* If entering Sx (Arg1 > 1), need to skip TCSS D3Cold & TBT RTD3/D3Cold. */ + SD3C = Arg1 +} + +Method (_PRW, 0) +{ + Return (Package() { 0x65, 4 }) +} diff --git a/src/soc/intel/pantherlake/acpi/tcss_pcierp.asl b/src/soc/intel/pantherlake/acpi/tcss_pcierp.asl new file mode 100644 index 0000000..827cceb --- /dev/null +++ b/src/soc/intel/pantherlake/acpi/tcss_pcierp.asl @@ -0,0 +1,335 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +/* + * TCSS PCIE RP Channel Configuration (CCFG) Config Space register offsets + * MPC - Miscellaneous Port Configuration Register + * RPPGEN - Root Port Power Gating Enable Register + * SMSCS - SMI/SCI Status Register + */ +#define PXCS_OPREGION_SIZE 0xc00 +#define TCSS_CFG_MPC_FROM_CCFG 0xba8 +#define TCSS_CFG_SMSCS_FROM_CCFG 0xbac +#define TCSS_CFG_RPPGEN_FROM_CCFG 0xbb2 + +OperationRegion (PXCS, SystemMemory, BASE(_ADR), PXCS_OPREGION_SIZE) +Field (PXCS, AnyAcc, NoLock, Preserve) +{ + VDID, 32, + Offset(0x50), /* LCTL - Link Control Register */ + L0SE, 1, /* 0, L0s Entry Enabled */ + , 3, + LDIS, 1, /* 1, Link Disable */ + , 4, + Offset(0x52), /* LSTS - Link Status Register */ + , 13, + LASX, 1, /* 0, Link Active Status */ + Offset(0x5a), /* SLSTS[7:0] - Slot Status Register */ + ABPX, 1, /* 0, Attention Button Pressed */ + , 2, + PDCX, 1, /* 3, Presence Detect Changed */ + , 2, + PDSX, 1, /* 6, Presence Detect State */ + , 1, + DLSC, 1, /* 8, Data Link Layer State Changed */ + Offset(0x60), /* RSTS - Root Status Register */ + Offset(0x62), + PSPX, 1, /* 16, PME Status */ + Offset (0x68), + , 10, + LNRE, 1, /* LTR Mechanism Enable */ + Offset(0xA4), + D3HT, 2, /* Power State */ + Offset (0x404), + LSOE, 1, + LNSE, 1, + Offset(0x420), /* 0x420, PCIEPMECTL (PCIe PM Extension Control) */ + , 30, + DPGE, 1, /* PCIEPMECTL[30]: Disabled, Detect and L23_Rdy State PHY Lane */ + /* Power Gating Enable (DLSULPPGE) */ + Offset(0x5bc), /* 0x5bc, PCIE ADVMCTRL */ + , 3, + RPER, 1, /* RTD3PERST[3] */ + RPFE, 1, /* RTD3PFETDIS[4] */ + Offset(TCSS_CFG_MPC_FROM_CCFG), /* 0xba8, MPC - Miscellaneous Port Configuration Register */ + , 30, + HPEX, 1, /* 30, Hot Plug SCI Enable */ + PMEX, 1, /* 31, Power Management SCI Enable */ + Offset(TCSS_CFG_RPPGEN_FROM_CCFG), /* 0xbb2, RPPGEN - Root Port Power Gating Enable */ + , 2, + L23E, 1, /* 2, L23_Rdy Entry Request (L23ER) */ + L23R, 1, /* 3, L23_Rdy to Detect Transition (L23R2DT) */ +} + +Field (PXCS, AnyAcc, NoLock, WriteAsZeros) +{ + Offset(TCSS_CFG_SMSCS_FROM_CCFG), /* 0xbac, SMSCS - SMI/SCI Status Register */ + , 30, + HPSX, 1, /* 30, Hot Plug SCI Status */ + PMSX, 1 /* 31, Power Management SCI Status */ +} + +/* + * _DSM Device Specific Method + * + * Arg0: UUID Unique function identifier + * Arg1: Integer Revision Level + * Arg2: Integer Function Index (0 = Return Supported Functions) + * Arg3: Package Parameters + */ +Method (_DSM, 4, Serialized) +{ + Return (Buffer() { 0x00 }) +} + +/* + * A bitmask of functions support + */ +Name(OPTS, Buffer(2) {0, 0}) + +Device (PXSX) +{ + Name (_ADR, 0x00000000) + + /* + * _DSM Device Specific Method + * + * Arg0: UUID: E5C937D0-3553-4d7a-9117-EA4D19C3434D + * Arg1: Revision ID: 3 + * Arg2: Function index: 0, 9 + * Arg3: Empty package + */ + Method (_DSM, 4, Serialized) + { + If (Arg0 == ToUUID("E5C937D0-3553-4d7a-9117-EA4D19C3434D")) { + If (Arg1 >= 3) { + If (Arg2 == 0) { + /* + * Function index: 0 + * Standard query - A bitmask of functions supported + */ + CreateBitField(OPTS, 9, FUN9) + FUN9 = 1 + Return (OPTS) + } ElseIf (Arg2 == 9) { + /* + * Function index: 9 + * Specifying device readiness durations + */ + Return (Package() { FW_RESET_TIME, FW_DL_UP_TIME, + FW_FLR_RESET_TIME, FW_D3HOT_TO_D0_TIME, + FW_VF_ENABLE_TIME }) + } + } + } + Return (Buffer() { 0x0 }) + } + + Method (_PRW, 0) + { + Return (Package() { 0x76, 4 }) + } +} + +Method (_DSW, 3) +{ + /* If entering Sx (Arg1 > 1), need to skip TCSS D3Cold & TBT RTD3/D3Cold. */ + If ((TUID == 0) || (TUID == 1)) { + \_SB.PCI0.TDM0.SD3C = Arg1 + } Else { + \_SB.PCI0.TDM1.SD3C = Arg1 + } + + C2PM (Arg0, Arg1, Arg2, DCPM) +} + +Method (_PRW, 0) +{ + Return (Package() { 0x76, 4 }) +} + +/* + * Sub-Method of _L61 Hot-Plug event + * _L61 event handler should invoke this method to support HotPlug wake event from TBT RP. + */ +Method (HPEV, 0, Serialized) +{ + If ((VDID != 0xFFFFFFFF) && HPSX) { + If ((PDCX == 1) && (DLSC == 1)) { + /* Clear all status bits first. */ + PDCX = 1 + HPSX = 1 + + /* Perform proper notification to the OS. */ + Notify (^, 0) + } Else { + /* False event. Clear Hot-Plug Status, then exit. */ + HPSX = 1 + } + } +} + +/* + * Power Management routine for D3 + */ +Name (STAT, 0x1) /* Variable to save power state 1 - D0, 0 - D3C */ + +/* + * RTD3 Exit Method to bring TBT controller out of RTD3 mode. + */ +Method (D3CX, 0, Serialized) +{ + If (STAT == 0x1) { + Return + } + + RPFE = 0 /* Set RTD3PFETDIS = 0 */ + RPER = 0 /* Set RTD3PERST = 0 */ + L23R = 1 /* Set L23r2dt = 1 */ + + /* + * Poll for L23r2dt == 0. Wait for transition to Detect. + */ + Local0 = 0 + Local1 = L23R + While (Local1) { + If (Local0 > 20) { + Break + } + Sleep(5) + Local0++ + Local1 = L23R + } + STAT = 0x1 +} + +/* + * RTD3 Entry method to enable TBT controller RTD3 mode. + */ +Method (D3CE, 0, Serialized) +{ + If (STAT == 0x0) { + Return + } + + If ((LNSE == 1) || (LSOE == 1)) { + If ((LASX == 1) && (LNRE == 0)) { + LNRE = 1 + Sleep(1) + LNRE = 0 + } + } + + L23E = 1 /* Set L23er = 1 */ + + /* Poll until L23er == 0 */ + Local0 = 0 + Local1 = L23E + While (Local1) { + If (Local0 > 20) { + Break + } + Sleep(5) + Local0++ + Local1 = L23E + } + + STAT = 0 /* D3Cold */ + RPFE = 1 /* Set RTD3PFETDIS = 1 */ + RPER = 1 /* Set RTD3PERST = 1 */ +} + +Method (_PS0, 0, Serialized) +{ + HPEV () /* Check and handle Hot Plug SCI status. */ + If (HPEX == 1) { + HPEX = 0 /* Disable Hot Plug SCI */ + } + HPME () /* Check and handle PME SCI status */ + If (PMEX == 1) { + PMEX = 0 /* Disable Power Management SCI */ + } +} + +Method (_PS3, 0, Serialized) +{ + /* Check it is hotplug SCI or not, then clear PDC accordingly */ + If (PDCX == 1) { + If (DLSC == 0) { + /* Clear PDC since it is not a hotplug. */ + PDCX = 1 + } + } + + If (HPEX == 0) { + HPEX = 1 /* Enable Hot Plug SCI. */ + HPEV () /* Check and handle Hot Plug SCI status. */ + } + If (PMEX == 0) { + PMEX = 1 /* Enable Power Management SCI. */ + HPME () /* Check and handle PME SCI status. */ + } +} + +Method (_S0W, 0x0, NotSerialized) +{ +#if CONFIG(D3COLD_SUPPORT) + Return (0x4) +#else + Return (0x3) +#endif // D3COLD_SUPPORT +} + +Method (_PR0) +{ +#if CONFIG(D3COLD_SUPPORT) + If ((TUID == 0) || (TUID == 1)) { + Return (Package() { \_SB.PCI0.D3C, \_SB.PCI0.TBT0 }) + } Else { + Return (Package() { \_SB.PCI0.D3C, \_SB.PCI0.TBT1 }) + } +#else + If ((TUID == 0) || (TUID == 1)) { + Return (Package() { \_SB.PCI0.TBT0 }) + } Else { + Return (Package() { \_SB.PCI0.TBT1 }) + } +#endif // D3COLD_SUPPORT +} + +Method (_PR3) +{ +#if CONFIG(D3COLD_SUPPORT) + If ((TUID == 0) || (TUID == 1)) { + Return (Package() { \_SB.PCI0.D3C, \_SB.PCI0.TBT0 }) + } Else { + Return (Package() { \_SB.PCI0.D3C, \_SB.PCI0.TBT1 }) + } +#else + If ((TUID == 0) || (TUID == 1)) { + Return (Package() { \_SB.PCI0.TBT0 }) + } Else { + Return (Package() { \_SB.PCI0.TBT1 }) + } +#endif // D3COLD_SUPPORT +} + +/* + * PCI_EXP_STS Handler for PCIE Root Port + */ +Method (HPME, 0, Serialized) +{ + If ((VDID != 0xFFFFFFFF) && (PMSX == 1)) { /* if port exists and PME SCI Status set */ + /* + * Notify child device; this will cause its driver to clear PME_Status from + * device. + */ + Notify (PXSX, 0x2) + PMSX = 1 /* clear rootport's PME SCI status */ + /* + * Consume one pending PME notification to prevent it from blocking the queue. + */ + PSPX = 1 + Return (0x01) + } + Return (0x00) +} diff --git a/src/soc/intel/pantherlake/acpi/tcss_xhci.asl b/src/soc/intel/pantherlake/acpi/tcss_xhci.asl new file mode 100644 index 0000000..59b0192 --- /dev/null +++ b/src/soc/intel/pantherlake/acpi/tcss_xhci.asl @@ -0,0 +1,188 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +OperationRegion (XPRT, SystemMemory, BASE(_ADR), 0x100) +Field (XPRT, ByteAcc, NoLock, Preserve) +{ + VDID, 32, + Offset(0x74), /* 0x74, XHCI CFG Power Control And Status */ + D0D3, 2, /* 0x74 BIT[1:0] */ + , 6, + PMEE, 1, /* PME Enable */ + , 6, + PMES, 1, /* PME Status */ +} + +Method (_PS0, 0, Serialized) +{ + If (\_SB.PCI0.TXHC.PMEE == 1) { + /* Clear PME_EN of CPU xHCI */ + \_SB.PCI0.TXHC.PMEE = 0 + } +} + +Method (_PS3, 0, Serialized) +{ + If (\_SB.PCI0.TXHC.PMEE == 0) { + /* Set PME_EN of CPU xHCI */ + \_SB.PCI0.TXHC.PMEE = 1 + } +} + +Method (_S0W, 0x0, NotSerialized) +{ +#if CONFIG(D3COLD_SUPPORT) + Return (0x4) +#else + Return (0x3) +#endif +} + +/* + * Variable to skip TCSS/TBT D3 cold; 1+: Skip D3CE, 0 - Enable D3CE + * TCSS D3 Cold and TBT RTD3 is only available when system power state is in S0. + */ +Name (SD3C, 0) + +#if CONFIG(D3COLD_SUPPORT) +Method (_PR0) +{ + Return (Package () { \_SB.PCI0.D3C }) +} + +Method (_PR3) +{ + Return (Package () { \_SB.PCI0.D3C }) +} +#endif + +/* + * XHCI controller _DSM method + */ +Method (_DSM, 4, serialized) +{ + Return (Buffer() { 0 }) +} + +/* + * _SXD and _SXW methods + */ +Method (_S3D, 0, NotSerialized) +{ + Return (3) +} + +Method (_S4D, 0, NotSerialized) +{ + Return (3) +} + +Method (_S3W, 0, NotSerialized) +{ + Return (3) +} + +Method (_S4W, 0, NotSerialized) +{ + Return (3) +} + +/* + * Power resource for wake + */ +Method (_PRW, 0) +{ + Return (Package() { 0x65, 4 }) +} + +/* + * Device sleep wake + */ +Method (_DSW, 3) +{ + C2PM (Arg0, Arg1, Arg2, DCPM) + /* If entering Sx (Arg1 > 1), need to skip TCSS D3Cold & TBT RTD3/D3Cold. */ + SD3C = Arg1 +} + +/* + * xHCI Root Hub Device + */ +Device (RHUB) +{ + Name (_ADR, 0) + + /* High Speed Ports */ + Device (HS01) + { + Name (_ADR, 0x01) + } + + /* Super Speed Ports */ + Device (SS01) + { + Name (_ADR, 0x02) + Method (_DSD, 0, NotSerialized) + { + Return( Package () + { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () + { + Package (2) { "usb4-host-interface", \_SB.PCI0.TDM0 }, + Package (2) { "usb4-port-number", 0 } + } + }) + } + } + + Device (SS02) + { + Name (_ADR, 0x03) + Method (_DSD, 0, NotSerialized) + { + Return( Package () + { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () + { + Package (2) { "usb4-host-interface", \_SB.PCI0.TDM0 }, + Package (2) { "usb4-port-number", 1 } + } + }) + } + } + + Device (SS03) + { + Name (_ADR, 0x04) + Method (_DSD, 0, NotSerialized) + { + Return( Package () + { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () + { + Package (2) { "usb4-host-interface", \_SB.PCI0.TDM1 }, + Package (2) { "usb4-port-number", 0 } + } + }) + } + } + + Device (SS04) + { + Name (_ADR, 0x05) + Method (_DSD, 0, NotSerialized) + { + Return( Package () + { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () + { + Package (2) { "usb4-host-interface", \_SB.PCI0.TDM1 }, + Package (2) { "usb4-port-number", 1 } + } + }) + } + } +} diff --git a/src/soc/intel/pantherlake/acpi/xhci.asl b/src/soc/intel/pantherlake/acpi/xhci.asl new file mode 100644 index 0000000..cd3b9f2 --- /dev/null +++ b/src/soc/intel/pantherlake/acpi/xhci.asl @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <soc/gpe.h> + +/* XHCI Controller 0:14.0 */ + +Device (XHCI) +{ + Name (_ADR, 0x00140000) + + Name (_PRW, Package () { GPE0_PME_B0, 3 }) + + Name (_S3D, 3) /* D3 supported in S3 */ + Name (_S0W, 3) /* D3 can wake device in S0 */ + Name (_S3W, 3) /* D3 can wake system from S3 */ + + Method (_PS0, 0, Serialized) + { + /* Disable Clock Gating */ + ^^PCRA (PID_XHCI, 0x0, ~(1 << 3)) + } + + Method (_PS3, 0, Serialized) + { + /* Enable Clock Gating */ + ^^PCRO (PID_XHCI, 0x0, 1 << 3) + } + + Device (RHUB) + { + Name (_ADR, 0) + + /* USB2 */ + Device (HS01) { Name (_ADR, 1) } + Device (HS02) { Name (_ADR, 2) } + Device (HS03) { Name (_ADR, 3) } + Device (HS04) { Name (_ADR, 4) } + Device (HS05) { Name (_ADR, 5) } + Device (HS06) { Name (_ADR, 6) } + Device (HS07) { Name (_ADR, 7) } + Device (HS08) { Name (_ADR, 8) } + /* USB3 */ + Device (SS01) { Name (_ADR, 11) } + Device (SS02) { Name (_ADR, 12) } + } +} -- To view, visit https://review.coreboot.org/c/coreboot/+/83772?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Ia5cf899b049cb8eb27b4ea30c7f3ce7a14884f15 Gerrit-Change-Number: 83772 Gerrit-PatchSet: 128 Gerrit-Owner: Ravishankar Sarawadi <ravishankar.sarawadi(a)intel.com> Gerrit-Reviewer: Anil Kumar K <anil.kumar.k(a)intel.com> Gerrit-Reviewer: Bora Guvendik <bora.guvendik(a)intel.com> Gerrit-Reviewer: Cliff Huang <cliff.huang(a)intel.com> Gerrit-Reviewer: Hannah Williams <hannah.williams(a)intel.com> Gerrit-Reviewer: Jamie Ryu <jamie.m.ryu(a)intel.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Pranava Y N <pranavayn(a)google.com> Gerrit-Reviewer: Saurabh Mishra <mishra.saurabh(a)intel.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: Wonkyu Kim <wonkyu.kim(a)intel.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Appukuttan V K <appukuttan.vk(a)intel.com> Gerrit-CC: Ashish Kumar Mishra <ashish.k.mishra(a)intel.com> Gerrit-CC: Balaji Manigandan <balaji.manigandan(a)intel.com> Gerrit-CC: Jérémy Compostella <jeremy.compostella(a)intel.com> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-CC: Ronak Kanabar <ronak.kanabar(a)intel.com> Gerrit-CC: Sanju Jose Thottan <sanjujose.thottan(a)intel.com> Gerrit-CC: Saurabh Mishra <mishra.saurabh(a)intel.corp-partner.google.com> Gerrit-CC: Vikrant L Jadeja <vikrant.l.jadeja(a)intel.com>

1 0

[XS] Change in coreboot[main]: soc/intel/common/block/acpi: exclude DMI fixed memory range if no DMI
by Subrata Banik (Code Review) 18 Sep '24

18 Sep '24

Attention is currently required from: Cliff Huang, Paul Menzel. Subrata Banik has posted comments on this change by Cliff Huang. ( https://review.coreboot.org/c/coreboot/+/84349?usp=email ) Change subject: soc/intel/common/block/acpi: exclude DMI fixed memory range if no DMI ...................................................................... Patch Set 6: (3 comments) Patchset: PS3: > Subrata, can you consider this to be part of PTL recipe? We need this flag set to '0' since we don't […] Acknowledged Patchset: PS5: > Jeremy's CL. will work on this tmr. Acknowledged File src/soc/intel/common/block/acpi/acpi/northbridge.asl: https://review.coreboot.org/c/coreboot/+/84349/comment/0caca86d_23d8e17c?us… : PS6, Line 325: #if DMI_BASE_SIZE != 0 #if DMI_BASE_SIZE -- To view, visit https://review.coreboot.org/c/coreboot/+/84349?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I971af2eb214b5940fa09d9dc0f9717bb5f0dfb4d Gerrit-Change-Number: 84349 Gerrit-PatchSet: 6 Gerrit-Owner: Cliff Huang <cliff.huang(a)intel.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Hannah Williams <hannah.williams(a)intel.com> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Cliff Huang <cliff.huang(a)intel.com> Gerrit-Attention: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Comment-Date: Wed, 18 Sep 2024 02:17:08 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Cliff Huang <cliff.huang(a)intel.com> Comment-In-Reply-To: Subrata Banik <subratabanik(a)google.com>

1 0

[L] Change in coreboot[main]: soc/intel/ptl: Define GPE1 macros and register fields
by Cliff Huang (Code Review) 18 Sep '24

18 Sep '24

Attention is currently required from: Kapil Porwal, Paul Menzel, Pranava Y N. Hello Kapil Porwal, Pranava Y N, Subrata Banik, build bot (Jenkins), I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/coreboot/+/84297?usp=email to look at the new patch set (#12). The following approvals got outdated and were removed: Verified+1 by build bot (Jenkins) Change subject: soc/intel/ptl: Define GPE1 macros and register fields ...................................................................... soc/intel/ptl: Define GPE1 macros and register fields New GPE1 bits are introduced in PTL for internal devices, incuding PME_B0, hot plug, and PCIe events. defines for GPE number for additional STD GPE0 in PTL defines for GPE number for GPE1 defines for GPE1 bits NOTE: All GEP1 bits are STD (Intel's Standard) GPE bits. BUG=362310295 TEST=This cannot be tested directly. Signed-off-by: Cliff Huang <cliff.huang(a)intel.com> Change-Id: Iebf6f6d02b37cc9702e4ee07c1ec0017b6628836 --- M src/soc/intel/pantherlake/include/soc/gpe.h M src/soc/intel/pantherlake/include/soc/pm.h 2 files changed, 436 insertions(+), 78 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/97/84297/12 -- To view, visit https://review.coreboot.org/c/coreboot/+/84297?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newpatchset Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Iebf6f6d02b37cc9702e4ee07c1ec0017b6628836 Gerrit-Change-Number: 84297 Gerrit-PatchSet: 12 Gerrit-Owner: Cliff Huang <cliff.huang(a)intel.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Pranava Y N <pranavayn(a)google.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Attention: Pranava Y N <pranavayn(a)google.com>

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit September 2024