coreboot-gerrit May 2024

coreboot-gerrit@coreboot.org

1 participants
3267 discussions

Start a nNew thread

[L] Change in coreboot[main]: mb/cwwk: Add CWWK CW-ADL-4L-V1.0 board
by Angel Pons (Code Review) 22 May '24

22 May '24

1 0

[L] Change in coreboot[main]: mb/cwwk: Add CWWK CW-ADL-4L-V1.0 board
by Angel Pons (Code Review) 22 May '24

22 May '24

Attention is currently required from: Brandon Weeks, Federico Amedeo Izzo, Felix Singer, Joel Linn, Paul Menzel. Angel Pons has posted comments on this change by Brandon Weeks. ( https://review.coreboot.org/c/coreboot/+/81595?usp=email ) Change subject: mb/cwwk: Add CWWK CW-ADL-4L-V1.0 board ...................................................................... Patch Set 10: Code-Review+1 (2 comments) Commit Message: https://review.coreboot.org/c/coreboot/+/81595/comment/… [View More]a1d6f5e9_681dac85?us… : PS9, Line 10: Memory: DDR5-4800 SODIMM (max 16 GB) > It only has 1 DIMM slot, however I get an error during complication when DIMM_MAX is set to 1: https […] OK, I wouldn't worry about the Kconfig. But at least SPD mapping should be updated. File src/mainboard/cwwk/adl/romstage_fsp_params.c: https://review.coreboot.org/c/coreboot/+/81595/comment/7d09a524_d0c3544b?us… : PS10, Line 23: [1] = { .addr_dimm[0] = 0x52, }, If the board only has one DIMM slot, then only one of these lines is needed. As to which, To figure out which, I'd suggest `i2cdetect -y $SMBUS_INDEX` where `SMBUS_INDEX` is the number that appears in `i2cdetect -l` -- To view, visit https://review.coreboot.org/c/coreboot/+/81595?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Ice9174d95c10afc6a22ddd15fb3be4fa38d329be Gerrit-Change-Number: 81595 Gerrit-PatchSet: 10 Gerrit-Owner: Brandon Weeks <bweeks(a)google.com> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Federico Amedeo Izzo <federico(a)izzo.pro> Gerrit-CC: Felix Singer <service+coreboot-gerrit(a)felixsinger.de> Gerrit-CC: Joel Linn <jl_coreboot(a)conductive.de> Gerrit-CC: Matthew Garrett <mjgarrett59(a)googlemail.com> Gerrit-Attention: Felix Singer <service+coreboot-gerrit(a)felixsinger.de> Gerrit-Attention: Brandon Weeks <bweeks(a)google.com> Gerrit-Attention: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Federico Amedeo Izzo <federico(a)izzo.pro> Gerrit-Attention: Joel Linn <jl_coreboot(a)conductive.de> Gerrit-Comment-Date: Tue, 21 May 2024 23:35:49 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes Comment-In-Reply-To: Brandon Weeks <bweeks(a)google.com> Comment-In-Reply-To: Angel Pons <th3fanbus(a)gmail.com> [View Less]

1 0

[L] Change in coreboot[main]: libpayload: Add x86_64 (64-bit) support
by Julius Werner (Code Review) 22 May '24

22 May '24

Attention is currently required from: Arthur Heymans, Kapil Porwal, Subrata Banik. Julius Werner has posted comments on this change by Subrata Banik. ( https://review.coreboot.org/c/coreboot/+/81968?usp=email ) Change subject: libpayload: Add x86_64 (64-bit) support ...................................................................... Patch Set 68: (5 comments) File payloads/libpayload/arch/x86/head_64.S: https://review.coreboot.org/c/coreboot/+/81968/comment/921c370b_cd0a8907?us… : … [View More]PS64, Line 100: movq %rax, %cr3 Which section are you quoting? I'm looking at 4.10.4.1 "Operations that Invalidate TLBs and Paging-Structure Caches": > • MOV to CR3. The behavior of the instruction depends on the value of CR4.PCIDE: > > — If CR4.PCIDE = 0, the instruction invalidates all TLB entries associated with PCID 000H except those for global pages. It also invalidates all entries in all paging-structure caches associated with PCID 000H. Doesn't say anything about it making a difference what value was in there before? https://review.coreboot.org/c/coreboot/+/81968/comment/029ec02b_f1251b94?us… : PS64, Line 118: > > Do we not need the `fninit` and `OSFXSR, OSXMMEXCPT` stuff in 64-bit mode? […] Remember that this payload can be booted from either 32-bit or 64-bit coreboot, so if 64-bit coreboot does something we cannot rely on that. In general, this handoff API seems to be written such that we should try to not rely on stuff as much as possible (e.g. a non-coreboot firmware could try to boot this through the multiboot API). So if 32-bit libpayload used to turn these on explicitly, we should probably continue to do that. (I don't think we need the CPUID checks if we're sure that there are no 64-bit CPUs that don't support those features, though, we can just turn them on unconditionally.) File payloads/libpayload/arch/x86/pt.S: https://review.coreboot.org/c/coreboot/+/81968/comment/2247c1c4_cd37c1c9?us… : PS64, Line 71: + > > Doesn't this still need a _PS bit? Otherwise, it points to a 4KB page table. […] _PS is (according to my understanding from quickly looking through the manual, so let me know if I got it wrong) the bit that tells it at each level whether this is the final (leaf) level and pointing directly to the physical page frame address, or this is a directory that points to another lower level of page tables. So for 1GB paging, 1GB is the lowest level of page tables we have and we have to set the _PS bit at the 1GB level (PDPTE). For the 2MB case, we must *not* set _PS at the PDPTE level (because there's still the 2MB level below it), but we *must* set it at the PDE level (because that's the final (leaf) level, there's no 4KB level below it). https://review.coreboot.org/c/coreboot/+/81968/comment/3a106a32_cd4e4343?us… : PS64, Line 82: incl %ebx > > These may be the other reason... […] Can you tell which instruction gives you an exception when you try that? File payloads/libpayload/include/x86/arch/exception.h: https://review.coreboot.org/c/coreboot/+/81968/comment/b046ea52_eaaa765b?us… : PS64, Line 74: #else > > > > I think it would be good to write this as a single struct definition where you only have an `i […] Sorry, no, you were absolutely right earlier, I didn't pay close enough attention to the order. The order is important and needs to be the same that GDB uses, so you can't change the order for the 32-bit structure. Please revert to the state where you had two separate struct definitions. -- To view, visit https://review.coreboot.org/c/coreboot/+/81968?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I69fda47bedf1a14807b1515c4aed6e3a1d5b8585 Gerrit-Change-Number: 81968 Gerrit-PatchSet: 68 Gerrit-Owner: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-CC: Julius Werner <jwerner(a)chromium.org> Gerrit-CC: Kapil Porwal <kapilporwal(a)google.com> Gerrit-CC: Karthik Ramasubramanian <kramasub(a)google.com> Gerrit-Attention: Subrata Banik <subratabanik(a)google.com> Gerrit-Attention: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Attention: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Comment-Date: Tue, 21 May 2024 23:20:50 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Subrata Banik <subratabanik(a)google.com> Comment-In-Reply-To: Julius Werner <jwerner(a)chromium.org> [View Less]

1 0

[M] Change in coreboot[main]: [UNTESTED, WIP] device: drop unnecessary CHECK_REV_IN_OPROM_NAME option
by Felix Held (Code Review) 22 May '24

22 May '24

Attention is currently required from: Fred Reitberger, Jason Glenesk, Matt DeVillier. Felix Held has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/82598?usp=email ) Change subject: [UNTESTED, WIP] device: drop unnecessary CHECK_REV_IN_OPROM_NAME option ...................................................................... [UNTESTED, WIP] device: drop unnecessary CHECK_REV_IN_OPROM_NAME option The CHECK_REV_IN_OPROM_NAME Kconfig option was once introduced to … [View More]solve the problem of the PCI VID/DID combination of the iGPU not being sufficient information to know which VGA BIOS file to run, so a new function that also check the PCI revision of that device was introduces. Later it turned out that there might be a case where even that isn't sufficient, so the soc_is_raven2() function was used in the remap function to always use the correct VBIOS file. Now that we use the VBIOS images with only the PCI VID and DID in the CBFS file name, SaeaBIOS will find the VBIOS with the same ID as the iGPU in CBFS and we don't need the workaround to add a third VBIOS image via VGA_BIOS_DGPU_* that has the name that SeaBIOS expects. This will result in SeaBIOS now running the VBIOS that has the same PCI VID/DID as the hardware which will be the wrong one in the RV2 silicon showing the PCO silicon PCI VID/DID, but that was also the case with the VGA_BIOS_DGPU_* workaround where the board's Kconfig just selected one of the two possible images during build time and hoped that it was the correct one for that actual hardware. Signed-off-by: Felix Held <felix-coreboot(a)felixheld.de> Change-Id: Ia6de533c536044698d85404427719b8f534870fa --- M src/device/Kconfig M src/device/pci_rom.c M src/mainboard/amd/bilby/Kconfig M src/mainboard/amd/mandolin/Kconfig M src/soc/amd/picasso/Kconfig M src/soc/amd/picasso/graphics.c 6 files changed, 11 insertions(+), 70 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/82598/1 diff --git a/src/device/Kconfig b/src/device/Kconfig index 404c73d..f78f3fd 100644 --- a/src/device/Kconfig +++ b/src/device/Kconfig @@ -890,12 +890,6 @@ Under GNU/Linux you can run `lspci -nn` to list the IDs of your PCI devices. -config CHECK_REV_IN_OPROM_NAME - def_bool n - help - Select this in the platform BIOS or chipset if the option rom has a revision - that needs to be checked when searching CBFS. - config VGA_BIOS_DGPU bool "Add a discrete VGA BIOS image" depends on VGA_BIOS diff --git a/src/device/pci_rom.c b/src/device/pci_rom.c index aca55d6..b9210b0 100644 --- a/src/device/pci_rom.c +++ b/src/device/pci_rom.c @@ -12,7 +12,6 @@ #include <acpi/acpigen.h> /* Rmodules don't like weak symbols. */ -void __weak map_oprom_vendev_rev(u32 *vendev, u8 *rev) { return; } u32 __weak map_oprom_vendev(u32 vendev) { return vendev; } void vga_oprom_preload(void) @@ -39,35 +38,16 @@ return cbfs_map(name, NULL); } -static void *cbfs_boot_map_optionrom_revision(uint16_t vendor, uint16_t device, uint8_t rev) -{ - char name[20] = "pciXXXX,XXXX,XX.rom"; - - snprintf(name, sizeof(name), "pci%04hx,%04hx,%02hhx.rom", vendor, device, rev); - - return cbfs_map(name, NULL); -} - struct rom_header *pci_rom_probe(const struct device *dev) { struct rom_header *rom_header = NULL; struct pci_data *rom_data; - u8 rev = pci_read_config8(dev, PCI_REVISION_ID); - u8 mapped_rev = rev; u32 vendev = (dev->vendor << 16) | dev->device; u32 mapped_vendev = vendev; /* If the ROM is in flash, then don't check the PCI device for it. */ - if (CONFIG(CHECK_REV_IN_OPROM_NAME)) { - map_oprom_vendev_rev(&mapped_vendev, &mapped_rev); - rom_header = cbfs_boot_map_optionrom_revision(mapped_vendev >> 16, - mapped_vendev & 0xffff, - mapped_rev); - } else { - mapped_vendev = map_oprom_vendev(vendev); - rom_header = cbfs_boot_map_optionrom(mapped_vendev >> 16, - mapped_vendev & 0xffff); - } + mapped_vendev = map_oprom_vendev(vendev); + rom_header = cbfs_boot_map_optionrom(mapped_vendev >> 16, mapped_vendev & 0xffff); if (rom_header) { printk(BIOS_DEBUG, "In CBFS, ROM address for %s = %p\n", diff --git a/src/mainboard/amd/bilby/Kconfig b/src/mainboard/amd/bilby/Kconfig index 19fcbe5..9573204 100644 --- a/src/mainboard/amd/bilby/Kconfig +++ b/src/mainboard/amd/bilby/Kconfig @@ -80,18 +80,6 @@ Picasso's LPC bus signals are MUXed with some of the EMMC signals. Select this option if LPC signals are required. -#TODO: remove this hack to not break graphics in combination with SeaBIOS -config VGA_BIOS_DGPU_ID - string - default "1002,15d8" - help - The default VGA BIOS PCI vendor/device ID should be set to the - result of the map_oprom_vendev() function in northbridge.c. - -config VGA_BIOS_DGPU_FILE - string - default "3rdparty/amd_blobs/picasso/PicassoGenericVbios.bin" - if !EM100 # EM100 defaults in soc/amd/common/blocks/spi/Kconfig config EFS_SPI_READ_MODE default 3 # Quad IO (1-1-4) diff --git a/src/mainboard/amd/mandolin/Kconfig b/src/mainboard/amd/mandolin/Kconfig index 252404b..ce3af3b 100644 --- a/src/mainboard/amd/mandolin/Kconfig +++ b/src/mainboard/amd/mandolin/Kconfig @@ -106,19 +106,6 @@ Picasso's LPC bus signals are MUXed with some of the EMMC signals. Select this option if LPC signals are required. -#TODO: remove this hack to not break graphics in combination with SeaBIOS -config VGA_BIOS_DGPU_ID - string - default "1002,15d8" - help - The default VGA BIOS PCI vendor/device ID should be set to the - result of the map_oprom_vendev() function in northbridge.c. - -config VGA_BIOS_DGPU_FILE - string - default "3rdparty/amd_blobs/picasso/PicassoGenericVbios.bin" if BOARD_AMD_MANDOLIN - default "3rdparty/amd_blobs/picasso/Raven2GenericVbios.bin" if BOARD_AMD_CEREME - if !EM100 # EM100 defaults in soc/amd/common/blocks/spi/Kconfig config EFS_SPI_READ_MODE default 3 # Quad IO (1-1-4) diff --git a/src/soc/amd/picasso/Kconfig b/src/soc/amd/picasso/Kconfig index d6c3fbd..9e70953 100644 --- a/src/soc/amd/picasso/Kconfig +++ b/src/soc/amd/picasso/Kconfig @@ -230,7 +230,7 @@ config VGA_BIOS_ID string - default "1002,15d8,c1" + default "1002,15d8" help The default VGA BIOS PCI vendor/device ID should be set to the result of the map_oprom_vendev_rev() function in graphics.c. @@ -244,25 +244,18 @@ config VGA_BIOS_SECOND_ID string - default "1002,15dd,c4" + default "1002,15dd" help Some Dali and all Pollock APUs need a different VBIOS than some other Dali and all Picasso APUs, but don't always have a different PCI vendor/device IDs, so we need an alternate method to determine the - correct video BIOS. In map_oprom_vendev_rev(), we look at the return + correct video BIOS. In map_oprom_vendev(), we look at the return value of soc_is_raven2() and decide which rom to load. config VGA_BIOS_SECOND_FILE string default "3rdparty/amd_blobs/picasso/Raven2GenericVbios.bin" -config CHECK_REV_IN_OPROM_NAME - bool - default y - help - Select this in the platform BIOS or chipset if the option rom has a - revision that needs to be checked when searching CBFS. - config S3_VGA_ROM_RUN bool default n diff --git a/src/soc/amd/picasso/graphics.c b/src/soc/amd/picasso/graphics.c index 3c2e0f8..bd7ec77 100644 --- a/src/soc/amd/picasso/graphics.c +++ b/src/soc/amd/picasso/graphics.c @@ -6,20 +6,19 @@ #include <soc/soc_util.h> #include <stdint.h> -void map_oprom_vendev_rev(u32 *vendev, u8 *rev) +u32 map_oprom_vendev(u32 vendev) { - if (*vendev == PICASSO_VBIOS_VID_DID) { + if (vendev == PICASSO_VBIOS_VID_DID) { /* Check if the RV2 video bios needs to be used instead of the RV1/PCO one */ if (soc_is_raven2()) { printk(BIOS_NOTICE, "Using RV2 VBIOS.\n"); - *vendev = RAVEN2_VBIOS_VID_DID; - *rev = RAVEN2_VBIOS_REV; + return RAVEN2_VBIOS_VID_DID; } else { printk(BIOS_NOTICE, "Using RV1/PCO VBIOS.\n"); - *rev = PICASSO_VBIOS_REV; } - } else if (*vendev == RAVEN2_VBIOS_VID_DID) { + } else if (vendev == RAVEN2_VBIOS_VID_DID) { printk(BIOS_NOTICE, "Using RV2 VBIOS.\n"); - *rev = RAVEN2_VBIOS_REV; } + + return vendev; } -- To view, visit https://review.coreboot.org/c/coreboot/+/82598?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Ia6de533c536044698d85404427719b8f534870fa Gerrit-Change-Number: 82598 Gerrit-PatchSet: 1 Gerrit-Owner: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-Reviewer: Fred Reitberger <reitbergerfred(a)gmail.com> Gerrit-Reviewer: Jason Glenesk <jason.glenesk(a)gmail.com> Gerrit-Reviewer: Matt DeVillier <matt.devillier(a)amd.corp-partner.google.com> Gerrit-Attention: Jason Glenesk <jason.glenesk(a)gmail.com> Gerrit-Attention: Matt DeVillier <matt.devillier(a)amd.corp-partner.google.com> Gerrit-Attention: Fred Reitberger <reitbergerfred(a)gmail.com> [View Less]

1 0

[S] Change in coreboot[main]: [UNTESTED, WIP] device/pci_rom: handle non-remapped VGA_BIOS_ID
by Felix Held (Code Review) 22 May '24

22 May '24

Attention is currently required from: Matt DeVillier, Nico Huber. Hello Matt DeVillier, Nico Huber, build bot (Jenkins), I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/coreboot/+/82592?usp=email to look at the new patch set (#3). The following approvals got outdated and were removed: Verified+1 by build bot (Jenkins) Change subject: [UNTESTED, WIP] device/pci_rom: handle non-remapped VGA_BIOS_ID .........................................................… [View More]

1 0

[S] Change in coreboot[main]: mb/system76/rpl: darp9: Add SSD RTD3 configs
by Tim Crawford (Code Review) 21 May '24

21 May '24

Tim Crawford has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/82597?usp=email ) Change subject: mb/system76/rpl: darp9: Add SSD RTD3 configs ...................................................................... mb/system76/rpl: darp9: Add SSD RTD3 configs Some drives block the CPU from reaching C10 during S0ix suspend without the RTD3 configs. Fixes suspend with the following drives: - Kingston KC3000 (SKC3000D/4096G) - Kingston HyperX (SHPM2280P2H/240G) - … [View More]Solidigm P44 Pro (SSDPFKKW010X7) The following drives continue to work: - Samsung 970 Evo (MZVLB250HAHQ) - WD Black SN770 (WDS250G3X0E) - WD Green SN350 (WDS240G2G0C-00AJM0) - WD Blue SN570 (WDS100T3B0C) Change-Id: Ia369727d0f1aa5ff546cfb5700a63063730e8248 Signed-off-by: Tim Crawford <tcrawford(a)system76.com> Tested-by: Levi Portenier <levi(a)system76.com> --- M src/mainboard/system76/rpl/variants/darp9/overridetree.cb 1 file changed, 10 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/97/82597/1 diff --git a/src/mainboard/system76/rpl/variants/darp9/overridetree.cb b/src/mainboard/system76/rpl/variants/darp9/overridetree.cb index c3bc2bd..fc9b49a 100644 --- a/src/mainboard/system76/rpl/variants/darp9/overridetree.cb +++ b/src/mainboard/system76/rpl/variants/darp9/overridetree.cb @@ -14,6 +14,11 @@ .clk_req = 0, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" + chip soc/intel/common/block/pcie/rtd3 + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F20)" # M2_SSD2_RST# + register "srcclk_pin" = "0" # SSD2_CLKREQ# + device generic 0 on end + end end device ref pcie4_1 on # CPU RP#3 x4, Clock 4 (SSD1) @@ -22,6 +27,11 @@ .clk_req = 4, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" + chip soc/intel/common/block/pcie/rtd3 + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B16)" # M2_SSD1_RST# + register "srcclk_pin" = "4" # SSD1_CLKREQ# + device generic 0 on end + end end device ref tbt_pcie_rp0 on end device ref tcss_xhci on -- To view, visit https://review.coreboot.org/c/coreboot/+/82597?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Ia369727d0f1aa5ff546cfb5700a63063730e8248 Gerrit-Change-Number: 82597 Gerrit-PatchSet: 1 Gerrit-Owner: Tim Crawford <tcrawford(a)system76.com> [View Less]

1 0

[XL] Change in coreboot[main]: mb/system76/rpl: Add Oryx Pro 12 as a variant
by Tim Crawford (Code Review) 21 May '24

21 May '24

Tim Crawford has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/82596?usp=email ) Change subject: mb/system76/rpl: Add Oryx Pro 12 as a variant ...................................................................... mb/system76/rpl: Add Oryx Pro 12 as a variant The Oryx Pro 12 (oryp12) is a Raptor Lake-HX board. Tested with a custom edk2 UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots (with Crucial CT8G48C40S5) - M.2 NVMe SSDs - … [View More]MicroSD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Backlight controls on Linux 6.8 - Internal microphone - Internal speakers - Combined headset + mic 3.5mm audio - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.8.0 - TPM 2.0 device Not working: - Discrete/Hybrid graphics - Thunderbolt Change-Id: I11cf2dbd1512ebae44e0109bdb78e6eafa027444 Signed-off-by: Tim Crawford <tcrawford(a)system76.com> --- M src/mainboard/system76/rpl/Kconfig M src/mainboard/system76/rpl/Kconfig.name A src/mainboard/system76/rpl/variants/oryp12/board.fmd A src/mainboard/system76/rpl/variants/oryp12/board_info.txt A src/mainboard/system76/rpl/variants/oryp12/data.vbt A src/mainboard/system76/rpl/variants/oryp12/gpio.c A src/mainboard/system76/rpl/variants/oryp12/gpio_early.c A src/mainboard/system76/rpl/variants/oryp12/hda_verb.c A src/mainboard/system76/rpl/variants/oryp12/overridetree.cb A src/mainboard/system76/rpl/variants/oryp12/romstage.c A src/mainboard/system76/rpl/variants/oryp12/tas5825m.c 11 files changed, 1,585 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/96/82596/1 diff --git a/src/mainboard/system76/rpl/Kconfig b/src/mainboard/system76/rpl/Kconfig index 60ea71b..1d32b49 100644 --- a/src/mainboard/system76/rpl/Kconfig +++ b/src/mainboard/system76/rpl/Kconfig @@ -65,6 +65,13 @@ select SOC_INTEL_ALDERLAKE_PCH_P select SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES +config BOARD_SYSTEM76_ORYP12 + select BOARD_SYSTEM76_RPL_COMMON + select DRIVERS_I2C_TAS5825M + select EC_SYSTEM76_EC_DGPU + select PCIEXP_HOTPLUG + select SOC_INTEL_ALDERLAKE_PCH_S + config BOARD_SYSTEM76_SERW13 select BOARD_SYSTEM76_RPL_COMMON select EC_SYSTEM76_EC_DGPU @@ -84,6 +91,7 @@ default "gaze18" if BOARD_SYSTEM76_GAZE18 default "lemp12" if BOARD_SYSTEM76_LEMP12 default "oryp11" if BOARD_SYSTEM76_ORYP11 + default "oryp12" if BOARD_SYSTEM76_ORYP12 default "serw13" if BOARD_SYSTEM76_SERW13 config OVERRIDE_DEVICETREE @@ -97,6 +105,7 @@ default "gaze18" if BOARD_SYSTEM76_GAZE18 default "lemp12" if BOARD_SYSTEM76_LEMP12 default "oryp11" if BOARD_SYSTEM76_ORYP11 + default "oryp12" if BOARD_SYSTEM76_ORYP12 default "serw13" if BOARD_SYSTEM76_SERW13 config MAINBOARD_SMBIOS_PRODUCT_NAME @@ -106,7 +115,7 @@ default "Galago Pro" if BOARD_SYSTEM76_GALP7 default "Gazelle" if BOARD_SYSTEM76_GAZE18 default "Lemur Pro" if BOARD_SYSTEM76_LEMP12 - default "Oryx Pro" if BOARD_SYSTEM76_ORYP11 + default "Oryx Pro" if BOARD_SYSTEM76_ORYP11 || BOARD_SYSTEM76_ORYP12 default "Serval WS" if BOARD_SYSTEM76_SERW13 config MAINBOARD_VERSION @@ -117,6 +126,7 @@ default "gaze18" if BOARD_SYSTEM76_GAZE18 default "lemp12" if BOARD_SYSTEM76_LEMP12 default "oryp11" if BOARD_SYSTEM76_ORYP11 + default "oryp12" if BOARD_SYSTEM76_ORYP12 default "serw13" if BOARD_SYSTEM76_SERW13 config CONSOLE_POST diff --git a/src/mainboard/system76/rpl/Kconfig.name b/src/mainboard/system76/rpl/Kconfig.name index da5d400..a33e57c 100644 --- a/src/mainboard/system76/rpl/Kconfig.name +++ b/src/mainboard/system76/rpl/Kconfig.name @@ -21,5 +21,8 @@ config BOARD_SYSTEM76_ORYP11 bool "oryp11" +config BOARD_SYSTEM76_ORYP12 + bool "oryp12" + config BOARD_SYSTEM76_SERW13 bool "serw13" diff --git a/src/mainboard/system76/rpl/variants/oryp12/board.fmd b/src/mainboard/system76/rpl/variants/oryp12/board.fmd new file mode 100644 index 0000000..b2615d1 --- /dev/null +++ b/src/mainboard/system76/rpl/variants/oryp12/board.fmd @@ -0,0 +1,12 @@ +FLASH 32M { + SI_DESC 4K + SI_ME 3944K + SI_BIOS@16M 16M { + RW_MRC_CACHE 64K + SMMSTORE(PRESERVE) 256K + WP_RO { + FMAP 4K + COREBOOT(CBFS) + } + } +} diff --git a/src/mainboard/system76/rpl/variants/oryp12/board_info.txt b/src/mainboard/system76/rpl/variants/oryp12/board_info.txt new file mode 100644 index 0000000..0d0df61 --- /dev/null +++ b/src/mainboard/system76/rpl/variants/oryp12/board_info.txt @@ -0,0 +1,2 @@ +Board name: oryp12 +Release year: 2024 diff --git a/src/mainboard/system76/rpl/variants/oryp12/data.vbt b/src/mainboard/system76/rpl/variants/oryp12/data.vbt new file mode 100644 index 0000000..da4235e --- /dev/null +++ b/src/mainboard/system76/rpl/variants/oryp12/data.vbt Binary files differ diff --git a/src/mainboard/system76/rpl/variants/oryp12/gpio.c b/src/mainboard/system76/rpl/variants/oryp12/gpio.c new file mode 100644 index 0000000..becce05 --- /dev/null +++ b/src/mainboard/system76/rpl/variants/oryp12/gpio.c @@ -0,0 +1,296 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <mainboard/gpio.h> +#include <soc/gpio.h> + +static const struct pad_config gpio_table[] = { + /* ------- GPIO Group GPD ------- */ + PAD_CFG_NF(GPD0, UP_20K, PWROK, NF1), // BATLOW_N + PAD_CFG_NF(GPD1, NATIVE, PWROK, NF1), // AC_PRESENT + PAD_NC(GPD2, NONE), + PAD_CFG_NF(GPD3, UP_20K, PWROK, NF1), // PWR_BTN# + PAD_CFG_NF(GPD4, NONE, PWROK, NF1), // SUSB#_PCH + PAD_CFG_NF(GPD5, NONE, PWROK, NF1), // SUSC#_PCH + PAD_NC(GPD6, NONE), // SLP_A# (test) + PAD_NC(GPD7, NONE), // GPD_7 (strap) + PAD_CFG_NF(GPD8, NONE, PWROK, NF1), // CNVI_SUSCLK + PAD_CFG_GPO(GPD9, 0, PWROK), // SLP_WLAN# + PAD_CFG_NF(GPD10, NONE, DEEP, NF1), // SLP_S5# (test) + PAD_NC(GPD11, NONE), + PAD_NC(GPD12, NONE), + + /* ------- GPIO Group GPP_A ------- */ + PAD_CFG_NF(GPP_A0, UP_20K, DEEP, NF1), // ESPI_IO0_EC + PAD_CFG_NF(GPP_A1, UP_20K, DEEP, NF1), // ESPI_IO1_EC + PAD_CFG_NF(GPP_A2, UP_20K, DEEP, NF1), // ESPI_IO2_EC + PAD_CFG_NF(GPP_A3, UP_20K, DEEP, NF1), // ESPI_IO3_EC + PAD_CFG_NF(GPP_A4, UP_20K, DEEP, NF1), // ESPI_CS_EC# + PAD_CFG_NF(GPP_A5, DN_20K, DEEP, NF1), // ESPI_CLK_EC + PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), // ESPI_RESET# + PAD_NC(GPP_A7, NONE), + PAD_NC(GPP_A8, NONE), + PAD_NC(GPP_A9, NONE), + PAD_CFG_NF(GPP_A10, UP_20K, DEEP, NF1), // SERIRQ_ESPI_ALERT0 + PAD_NC(GPP_A11, NONE), + PAD_NC(GPP_A12, NONE), + PAD_NC(GPP_A13, NONE), + PAD_NC(GPP_A14, NONE), + + /* ------- GPIO Group GPP_B ------- */ + _PAD_CFG_STRUCT(GPP_B0, 0x40100100, 0x3000), // PIRQ#_TPM + PAD_CFG_GPI(GPP_B1, NONE, DEEP), + PAD_CFG_GPI(GPP_B2, NONE, DEEP), //CNVI_WAKE# + PAD_CFG_GPO(GPP_B3, 1, PLTRST), // BT_EN + PAD_NC(GPP_B4, NONE), + PAD_NC(GPP_B5, NONE), + PAD_NC(GPP_B6, NONE), + PAD_NC(GPP_B7, NONE), // M2_SSD2_RST# + PAD_NC(GPP_B8, NONE), // M2_SSD1_RST# + PAD_NC(GPP_B9, NONE), // M2_SSD1_PWR_EN + PAD_NC(GPP_B10, NONE), // M2_SSD2_PWR_EN + PAD_NC(GPP_B11, NONE), + PAD_NC(GPP_B12, NONE), + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), // PLT_RST# + PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1), // HDA_SPKR + PAD_CFG_GPO(GPP_B15, 0, DEEP), // PS8461_SW (XXX: NC) + PAD_NC(GPP_B16, NONE), + PAD_NC(GPP_B17, NONE), + PAD_CFG_NF(GPP_B18, NONE, PWROK, NF1), // GPP_B18_PMCALERT# + PAD_CFG_GPO(GPP_B19, 1, DEEP), // PCH_WLAN_EN (XXX: NC) + PAD_CFG_GPO(GPP_B20, 0, DEEP), // GPIO_LANRTD3 + _PAD_CFG_STRUCT(GPP_B21, 0x42880100, 0x0000), // GPP_B21_TBT_WAKE# + PAD_CFG_GPO(GPP_B22, 0, DEEP), // LAN_PLT_RST# + PAD_CFG_GPI(GPP_B23, NONE, DEEP), // Crystal frequency bit 1 strap + + /* ------- GPIO Group GPP_C ------- */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), // SMB_CLK + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), // SMB_DATA + PAD_CFG_GPI(GPP_C2, NONE, DEEP), // PCH_PORT80_LED + PAD_CFG_NF(GPP_C3, NONE, DEEP, NF3), // GPPB_I2C2_SDA + PAD_CFG_NF(GPP_C4, NONE, DEEP, NF3), // GPPB_I2C2_SCL + PAD_CFG_GPO(GPP_C5, 0, DEEP), // GPP_C_5_SML0ALERT_N + PAD_CFG_NF(GPP_C6, NONE, DEEP, NF2), // I2C_SDA_AMP + PAD_CFG_NF(GPP_C7, NONE, DEEP, NF2), // I2C_SCL_AMP + PAD_CFG_GPI(GPP_C8, NONE, DEEP), // TPM_DET + PAD_NC(GPP_C9, NONE), + PAD_NC(GPP_C10, NONE), + PAD_NC(GPP_C11, NONE), + PAD_NC(GPP_C12, NONE), + PAD_NC(GPP_C13, NONE), + PAD_NC(GPP_C14, NONE), + PAD_NC(GPP_C15, NONE), + PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), // I2C_SDA_TP + PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), // I2C_SCL_TP + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), // PCH_I2C_SDA + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), // PCH_I2C_SCL + // GPP_C20 (UART2_RXD) configured in bootblock + // GPP_C21 (UART2_TXD) configured in bootblock + PAD_CFG_GPO(GPP_C22, 0, DEEP), + PAD_CFG_GPO(GPP_C23, 0, DEEP), + + /* ------- GPIO Group GPP_D ------- */ + PAD_NC(GPP_D0, NONE), + PAD_NC(GPP_D1, NONE), + PAD_NC(GPP_D2, NONE), + PAD_CFG_GPO(GPP_D3, 0, DEEP), // GFX_DETECT_STRAP + PAD_NC(GPP_D4, NONE), // GPP_D4_SML1CLK + PAD_CFG_GPO(GPP_D5, 1, DEEP), // M.2_BT_PCMFRM_CRF_RST_N + // GPP_D6 (M.2_BT_PCMOUT_CLKREQ0) configured by FSP + PAD_NC(GPP_D7, NONE), // M.2_BT_PCMIN + PAD_NC(GPP_D8, NONE), // M.2_BT_PCMCLK + PAD_NC(GPP_D9, NONE), // GPP_D9_SML0CLK + PAD_NC(GPP_D10, NONE), // GPP_D10_SML0DATA + PAD_NC(GPP_D11, NONE), + PAD_NC(GPP_D12, NONE), + PAD_NC(GPP_D13, NONE), + PAD_NC(GPP_D14, NONE), + PAD_NC(GPP_D15, NONE), // GPP_D15_SML1DATA + PAD_NC(GPP_D16, NONE), + PAD_NC(GPP_D17, NONE), + PAD_NC(GPP_D18, NONE), + PAD_NC(GPP_D19, NONE), + PAD_NC(GPP_D20, NONE), + PAD_NC(GPP_D21, NONE), + PAD_NC(GPP_D22, NONE), + PAD_NC(GPP_D23, NONE), + + /* ------- GPIO Group GPP_E ------- */ + PAD_NC(GPP_E0, NONE), + PAD_NC(GPP_E1, NONE), + PAD_CFG_GPI(GPP_E2, NONE, DEEP), // SWI# + PAD_CFG_GPI(GPP_E3, NONE, DEEP), // SMI# + PAD_NC(GPP_E4, NONE), + PAD_NC(GPP_E5, NONE), + PAD_NC(GPP_E6, NONE), + PAD_CFG_GPI_INT(GPP_E7, NONE, PLTRST, LEVEL), // TP_ATTN# + PAD_NC(GPP_E8, NONE), + PAD_CFG_GPI(GPP_E9, NONE, DEEP), // GPP_E_9_USB_OC0_N + PAD_CFG_GPI(GPP_E10, NONE, DEEP), // GPP_E_10_USB_OC1_N + PAD_CFG_GPI(GPP_E11, NONE, DEEP), // GPP_E_11_USB_OC2_N + PAD_CFG_GPI(GPP_E12, NONE, DEEP), // GPP_E_12_USB_OC3_N + PAD_NC(GPP_E13, NONE), + PAD_NC(GPP_E14, NONE), + PAD_CFG_GPO(GPP_E15, 1, DEEP), // ROM_I2C_EN + PAD_NC(GPP_E16, NONE), + PAD_CFG_GPI(GPP_E17, NONE, DEEP), // SB_KBCRST# + PAD_CFG_GPO(GPP_E18, 1, DEEP), // SB_BLON + PAD_NC(GPP_E19, NONE), + PAD_NC(GPP_E20, NONE), + PAD_NC(GPP_E21, NONE), + + /* ------- GPIO Group GPP_F ------- */ + PAD_NC(GPP_F0, NONE), + PAD_NC(GPP_F1, NONE), + PAD_CFG_GPO(GPP_F2, 1, DEEP), // GPP_F2_TBT_RST# + PAD_NC(GPP_F3, NONE), + PAD_NC(GPP_F4, NONE), + PAD_CFG_GPI(GPP_F5, NONE, DEEP), // GPIO4_GC6_NVVDD_EN_R + PAD_NC(GPP_F6, NONE), // GPU_EVENT# + PAD_NC(GPP_F7, NONE), + PAD_CFG_GPI(GPP_F8, NONE, PLTRST), // GC6_FB_EN_PCH + // GPP_F9 (DGPU_PWR_EN) configured in bootblock + PAD_CFG_GPI(GPP_F10, NONE, DEEP), // GPP_F10 + PAD_NC(GPP_F11, NONE), // CARD_RTD3_RST# + PAD_NC(GPP_F12, NONE), + PAD_NC(GPP_F13, NONE), + PAD_NC(GPP_F14, NONE), + PAD_CFG_GPI(GPP_F15, NONE, DEEP), // H_SKTOCC_N + PAD_NC(GPP_F16, NONE), + PAD_CFG_GPI(GPP_F17, NONE, DEEP), // PLVDD_RST_EC + PAD_CFG_GPO(GPP_F18, 0, DEEP), // CCD_FW_WP# + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), // NB_ENAVDD + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), // BLON + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), // EDP_BRIGHTNESS + PAD_NC(GPP_F22, NONE), + PAD_NC(GPP_F23, NONE), + + /* ------- GPIO Group GPP_G ------- */ + PAD_NC(GPP_G0, NONE), + PAD_NC(GPP_G1, NONE), + PAD_NC(GPP_G2, NONE), + PAD_CFG_GPI(GPP_G3, NONE, DEEP), // L: W/Pantone, H: W/O Pantone + PAD_CFG_GPI(GPP_G4, NONE, DEEP), // L: BID_X2, H: BID_X6/X4 + PAD_CFG_NF(GPP_G5, NONE, DEEP, NF1), // GPP_G_5_SLP_DRAM_N + PAD_CFG_GPI(GPP_G6, NONE, DEEP), + PAD_CFG_GPI(GPP_G7, NONE, DEEP), + + /* ------- GPIO Group GPP_H ------- */ + PAD_CFG_GPI(GPP_H0, NONE, DEEP), // VAL_SV_ADVANCE_STRAP + PAD_NC(GPP_H1, NONE), + PAD_CFG_GPI(GPP_H2, NONE, DEEP), // LAN_GPIO_WAKE_N + // GPP_H3 (PEX_SSD2_CLKREQ#) configured by FSP + // GPP_H4 (PEX_SSD1_CLKREQ#) configured by FSP + // GPP_H5 (WLAN_CLKREQ#) configured by FSP + // GPP_H6 (CARD_CLKREQ#) configured by FSP + // GPP_H7 (LAN_CLKREQ#) configured by FSP + // GPP_H8 (PEG_CLKREQ#) configured by FSP + // GPP_H9 (TBT_CLKREQ#) configured by FSP + PAD_NC(GPP_H10, NONE), + PAD_NC(GPP_H11, NONE), + PAD_CFG_GPO(GPP_H12, 0, DEEP), // L: MAFS, H: SAFS + PAD_NC(GPP_H13, NONE), + PAD_NC(GPP_H14, NONE), + PAD_CFG_GPO(GPP_H15, 0, DEEP), // JTAG ODT: L: disabled, H: enabled + PAD_NC(GPP_H16, NONE), + PAD_NC(GPP_H17, NONE), // M2_WLAN_RST# + PAD_CFG_GPO(GPP_H18, 0, DEEP), // VCCSPI: L: 3.3V, H: 1.8V + PAD_NC(GPP_H19, NONE), + PAD_NC(GPP_H20, NONE), + PAD_CFG_GPO(GPP_H21, 0, DEEP), // TBT_MRESET_PCH + PAD_NC(GPP_H22, NONE), + PAD_NC(GPP_H23, NONE), + + /* ------- GPIO Group GPP_I ------- */ + PAD_NC(GPP_I0, NONE), + PAD_CFG_NF(GPP_I1, NONE, PLTRST, NF1), // CPU_DP_B_HPD + PAD_CFG_NF(GPP_I2, NONE, PLTRST, NF1), // HDMI_HPD + PAD_CFG_NF(GPP_I3, NONE, PLTRST, NF1), // CPU_DP_D_HPD + PAD_CFG_NF(GPP_I4, NONE, PLTRST, NF1), // G_DP_A_HPD_L + PAD_CFG_GPO(GPP_I5, 0, DEEP), // GPIO_TBT_RESET + PAD_NC(GPP_I6, NONE), + PAD_NC(GPP_I7, NONE), + PAD_NC(GPP_I8, NONE), + PAD_NC(GPP_I9, NONE), + PAD_NC(GPP_I10, NONE), + PAD_CFG_GPI(GPP_I11, NONE, DEEP), // GPP_I_11_USB_OC4_N + PAD_CFG_GPI(GPP_I12, NONE, DEEP), // GPP_I_12_USB_OC5_N + PAD_CFG_GPI(GPP_I13, NONE, DEEP), // GPP_I_13_USB_OC6_N + PAD_CFG_GPI(GPP_I14, NONE, DEEP), // GPP_I_14_USB_OC7_N + PAD_NC(GPP_I15, NONE), + PAD_NC(GPP_I16, NONE), + PAD_NC(GPP_I17, NONE), + PAD_CFG_GPO(GPP_I18, 0, DEEP), // No Reboot: L: disable H: enable + PAD_NC(GPP_I19, NONE), + PAD_NC(GPP_I20, NONE), + PAD_NC(GPP_I21, NONE), + PAD_CFG_GPO(GPP_I22, 0, DEEP), // BIOS fetch routing: + // L: SPI (MAF) or eSPI Flash Ch (SAF) + // H: eSPI Peripheral Ch + + /* ------- GPIO Group GPP_J ------- */ + PAD_CFG_NF(GPP_J0, NONE, DEEP, NF1), // CNVI_GNSS_PA_BLANKING + PAD_CFG_NF(GPP_J1, NONE, DEEP, NF1), // CPU_C10_GATE_N + PAD_CFG_NF(GPP_J2, NONE, DEEP, NF1), // CNVI_BRI_DT + PAD_CFG_NF(GPP_J3, UP_20K, DEEP, NF1), // CNVI_BRI_RSP + PAD_CFG_NF(GPP_J4, NONE, DEEP, NF1), // CNVI_RGI_DT + PAD_CFG_NF(GPP_J5, UP_20K, DEEP, NF1), // CNVI_RGI_RSP + PAD_CFG_NF(GPP_J6, NONE, DEEP, NF1), // CNVI_MFUART2_RXD + PAD_CFG_NF(GPP_J7, NONE, DEEP, NF1), // CNVI_MFUART2_TXD + PAD_CFG_GPI(GPP_J8, NONE, DEEP), // VAL_TEST_SETUP_MENU + PAD_NC(GPP_J9, NONE), + PAD_NC(GPP_J10, NONE), + PAD_NC(GPP_J11, NONE), + + /* ------- GPIO Group GPP_K ------- */ + _PAD_CFG_STRUCT(GPP_K0, 0x42800100, 0x0000), // TBCIO_PLUG_EVENT# + PAD_NC(GPP_K1, NONE), + PAD_NC(GPP_K2, NONE), + PAD_CFG_GPO(GPP_K3, 1, PLTRST), // TBT_RTD3_PWR_EN_R + PAD_CFG_TERM_GPO(GPP_K4, 0, UP_20K, DEEP), // TBT_FORCE_PWR_R + PAD_NC(GPP_K5, NONE), + // GPP_K6 not in schematics + // GPP_K7 not in schematics + PAD_CFG_NF(GPP_K8, NONE, DEEP, NF1), // VCCIN_AUX_VID0 + PAD_CFG_NF(GPP_K9, NONE, DEEP, NF1), // VCCIN_AUX_VID1 + // GPP_K10 not in schematics + PAD_NC(GPP_K11, NONE), + + /* ------- GPIO Group GPP_R ------- */ + PAD_CFG_NF(GPP_R0, NONE, DEEP, NF1), // HDA_BITCLK + PAD_CFG_NF(GPP_R1, NATIVE, DEEP, NF1), // HDA_SYNC + PAD_CFG_NF(GPP_R2, NATIVE, DEEP, NF1), // HDA_SDOUT / ME_WE + PAD_CFG_NF(GPP_R3, NATIVE, DEEP, NF1), // HDA_SDIN0 + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF1), // HDA_RST# + PAD_CFG_GPO(GPP_R5, 0, DEEP), // PCH_MUTE (XXX: SMART_AMP_EN) + PAD_NC(GPP_R6, NONE), + PAD_NC(GPP_R7, NONE), + PAD_CFG_GPI(GPP_R8, NONE, DEEP), // DGPU_PWRGD_R + PAD_CFG_NF(GPP_R9, NONE, DEEP, NF1), // PCH_EDP_HPD + PAD_NC(GPP_R10, NONE), + PAD_NC(GPP_R11, NONE), + PAD_NC(GPP_R12, NONE), + PAD_NC(GPP_R13, NONE), + PAD_NC(GPP_R14, NONE), + PAD_NC(GPP_R15, NONE), + // GPP_R16 (DGPU_RST#_PCH) configured in bootblock + PAD_NC(GPP_R17, NONE), + PAD_NC(GPP_R18, NONE), + PAD_CFG_GPI(GPP_R19, NONE, DEEP), // SCI# + PAD_NC(GPP_R20, NONE), + PAD_NC(GPP_R21, NONE), + + /* ------- GPIO Group GPP_S ------- */ + PAD_NC(GPP_S0, NONE), + PAD_NC(GPP_S1, NONE), + PAD_NC(GPP_S2, NONE), + PAD_NC(GPP_S3, NONE), + PAD_NC(GPP_S4, NONE), + PAD_NC(GPP_S5, NONE), + PAD_NC(GPP_S6, NONE), + PAD_NC(GPP_S7, NONE), +}; + +void mainboard_configure_gpios(void) +{ + gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); +} diff --git a/src/mainboard/system76/rpl/variants/oryp12/gpio_early.c b/src/mainboard/system76/rpl/variants/oryp12/gpio_early.c new file mode 100644 index 0000000..b6914ad --- /dev/null +++ b/src/mainboard/system76/rpl/variants/oryp12/gpio_early.c @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <mainboard/gpio.h> +#include <soc/gpio.h> + +static const struct pad_config early_gpio_table[] = { + PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), // UART2_RXD + PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), // UART2_TXD + PAD_CFG_GPO(GPP_F9, 0, DEEP), // DGPU_PWR_EN + PAD_CFG_GPO(GPP_R16, 0, DEEP), // DGPU_RST#_PCH +}; + +void mainboard_configure_early_gpios(void) +{ + gpio_configure_pads(early_gpio_table, ARRAY_SIZE(early_gpio_table)); +} diff --git a/src/mainboard/system76/rpl/variants/oryp12/hda_verb.c b/src/mainboard/system76/rpl/variants/oryp12/hda_verb.c new file mode 100644 index 0000000..9bd1e6d --- /dev/null +++ b/src/mainboard/system76/rpl/variants/oryp12/hda_verb.c @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* Realtek, ALC1220 */ + 0x10ec1220, /* Vendor ID */ + 0x155866a6, /* Subsystem ID */ + 24, /* Number of entries */ + + 0x02050008, 0x020480cb, 0x02050008, 0x0204c0cb, + + AZALIA_SUBVENDOR(0, 0x155866a6), + AZALIA_RESET(1), + AZALIA_PIN_CFG(0, 0x12, 0x90a60120), + AZALIA_PIN_CFG(0, 0x14, 0x0421101f), + AZALIA_PIN_CFG(0, 0x15, 0x40000000), + AZALIA_PIN_CFG(0, 0x16, 0x411111f0), + AZALIA_PIN_CFG(0, 0x17, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x04a11030), + AZALIA_PIN_CFG(0, 0x19, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1a, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1b, 0x90170110), + AZALIA_PIN_CFG(0, 0x1d, 0x40a7952d), + AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), + + 0x05b50000, 0x05b43530, 0x05750002, 0x05741400, + 0x02050058, 0x02048ed1, 0x02050063, 0x0204e430, + 0x02050016, 0x02048020, 0x02050016, 0x02048020, + 0x02050043, 0x02043005, 0x02050058, 0x02048ed1, + 0x02050063, 0x0204e430, 0x05b50000, 0x05b43530, + 0x05750002, 0x05741400, 0x05b5000a, 0x05b45520, + 0x02050042, 0x020486cb, 0x0143b000, 0x01470740, + 0x02050036, 0x02042a6a, 0x02050008, 0x0204800b, + 0x02050007, 0x020403c3, 0x02050007, 0x020403c3, + 0x0205001b, 0x02044002, 0x0205001b, 0x02044002, +}; + +const u32 pc_beep_verbs[] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/system76/rpl/variants/oryp12/overridetree.cb b/src/mainboard/system76/rpl/variants/oryp12/overridetree.cb new file mode 100644 index 0000000..f9a6c92 --- /dev/null +++ b/src/mainboard/system76/rpl/variants/oryp12/overridetree.cb @@ -0,0 +1,119 @@ +chip soc/intel/alderlake + # Support 5600 MT/s memory + register "max_dram_speed_mts" = "5600" + + device domain 0 on + subsystemid 0x1558 0x66a6 inherit + + device ref xhci on + register "usb2_ports" = "{ + [0] = USB2_PORT_MID(OC_SKIP), // J_AUD1 + [2] = USB2_PORT_MID(OC_SKIP), // J_TYPEC2 + [5] = USB2_PORT_MID(OC_SKIP), // J_USB1 + [7] = USB2_PORT_MID(OC_SKIP), // Camera + [8] = USB2_PORT_MID(OC_SKIP), // J_TYPEC1 (TBT) + [13] = USB2_PORT_MID(OC_SKIP), // Bluetooth + }" + register "usb3_ports" = "{ + [0] = USB3_PORT_DEFAULT(OC_SKIP), // J_AUD1 + [1] = USB3_PORT_DEFAULT(OC_SKIP), // J_USB1 + [3] = USB3_PORT_DEFAULT(OC_SKIP), // J_TYPEC2 + }" + end + + device ref i2c0 on + # Touchpad I2C bus + register "serial_io_i2c_mode[PchSerialIoIndexI2C0]" = "PchSerialIoPci" + chip drivers/i2c/hid + register "generic.hid" = ""ELAN0412"" + register "generic.desc" = ""ELAN Touchpad"" + register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_E7)" + register "generic.detect" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 15 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""FTCS1000"" + register "generic.desc" = ""FocalTech Touchpad"" + register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_E7)" + register "generic.detect" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 38 on end + end + end + device ref i2c1 on + # Thunderbolt + register "serial_io_i2c_mode[PchSerialIoIndexI2C1]" = "PchSerialIoPci" + end + device ref i2c2 on + # Pantone + register "serial_io_i2c_mode[PchSerialIoIndexI2C2]" = "PchSerialIoPci" + end + device ref i2c3 on + # TAS5825M smart amp + register "serial_io_i2c_mode[PchSerialIoIndexI2C3]" = "PchSerialIoPci" + chip drivers/i2c/tas5825m + register "id" = "0" + device i2c 4e on end # (8bit address: 0x9c) + end + end + + device ref pcie5_0 on + # GPU + register "cpu_pcie_rp[CPU_RP(2)]" = "{ + .clk_src = 14, + .clk_req = 14, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end + device ref pcie_rp3 on + # GLAN + register "pch_pcie_rp[PCH_RP(3)]" = "{ + .clk_src = 13, + .clk_req = 13, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end + device ref pcie_rp5 on + # CARD + register "pch_pcie_rp[PCH_RP(5)]" = "{ + .clk_src = 12, + .clk_req = 12, + .flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_HOTPLUG, + }" + end + device ref pcie_rp8 on + # WLAN + register "pch_pcie_rp[PCH_RP(8)]" = "{ + .clk_src = 11, + .clk_req = 11, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end + device ref pcie_rp9 on + # SSD1 + register "pch_pcie_rp[PCH_RP(9)]" = "{ + .clk_src = 10, + .clk_req = 10, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end + device ref pcie_rp13 on + # SSD2 + register "pch_pcie_rp[PCH_RP(13)]" = "{ + .clk_src = 9, + .clk_req = 9, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end + device ref pcie_rp25 on + # TBT + # XXX: AER causes UnsupReq warnings + register "pch_pcie_rp[PCH_RP(25)]" = "{ + .clk_src = 15, + .clk_req = 15, + .flags = PCIE_RP_LTR | PCIE_RP_HOTPLUG, + }" + end + end +end diff --git a/src/mainboard/system76/rpl/variants/oryp12/romstage.c b/src/mainboard/system76/rpl/variants/oryp12/romstage.c new file mode 100644 index 0000000..fe91032 --- /dev/null +++ b/src/mainboard/system76/rpl/variants/oryp12/romstage.c @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <soc/meminit.h> +#include <soc/romstage.h> + +void mainboard_memory_init_params(FSPM_UPD *mupd) +{ + const struct mb_cfg board_cfg = { + .type = MEM_TYPE_DDR5, + .ect = true, + .LpDdrDqDqsReTraining = 1, + .ddr_config = { + .dq_pins_interleaved = true, + }, + }; + const struct mem_spd spd_info = { + .topo = MEM_TOPO_DIMM_MODULE, + .smbus = { + [0] = { .addr_dimm[0] = 0x50, }, + [1] = { .addr_dimm[0] = 0x52, }, + }, + }; + const bool half_populated = false; + + // Set primary display to hybrid graphics + mupd->FspmConfig.PrimaryDisplay = 4; + + mupd->FspmConfig.DmiMaxLinkSpeed = 4; + mupd->FspmConfig.GpioOverride = 0; + + memcfg_init(mupd, &board_cfg, &spd_info, half_populated); +} diff --git a/src/mainboard/system76/rpl/variants/oryp12/tas5825m.c b/src/mainboard/system76/rpl/variants/oryp12/tas5825m.c new file mode 100644 index 0000000..45dfb38 --- /dev/null +++ b/src/mainboard/system76/rpl/variants/oryp12/tas5825m.c @@ -0,0 +1,1053 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <delay.h> +#include <drivers/i2c/tas5825m/tas5825m.h> + +int tas5825m_setup(struct device *dev, int id) +{ + int res; + + res = tas5825m_set_book(dev, 0x00); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x03, 0x02); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x01, 0x11); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x03, 0x02); + if (res < 0) + return res; + + mdelay(5); + + res = tas5825m_write_at(dev, 0x03, 0x12); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x48, 0x0C); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x7F, 0x64); + if (res < 0) + return res; + + res = tas5825m_set_page(dev, 0x01); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0xFE, 0x00, 0x40, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0xFC, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0xFC, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0xFC, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0xFC, 0x50, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0xFC, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0xFC, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0xFC, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0xFC, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0xFC, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0xFC, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0xFC, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x00, 0x82, 0x00, 0x93, 0x00, 0xFC, 0x00, 0x00, + 0x8F, 0x00, 0xFF, 0xEF, 0x84, 0x49, 0x03, 0x27, + 0x84, 0x02, 0x04, 0x06, 0x02, 0x60, 0x00, 0x01, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x02); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x02, 0x70, 0x00, 0x06, 0x02, 0x78, 0x00, 0x05, + 0x02, 0x68, 0x00, 0x02, 0x02, 0x28, 0x03, 0x4D, + 0x84, 0x2A, 0x04, 0x00, 0xE2, 0x57, 0x91, 0x9F, + 0x84, 0x82, 0x20, 0xE0, 0x84, 0x82, 0x04, 0x01, + 0xF0, 0x1C, 0x31, 0xA0, 0xF0, 0x1C, 0x31, 0xA1, + 0xF0, 0x1C, 0x31, 0xA2, 0xF0, 0x1F, 0x31, 0xA3, + 0xE4, 0x00, 0x11, 0xA6, 0x80, 0x27, 0x80, 0xE1, + 0xF4, 0x00, 0x11, 0xA4, 0xF4, 0x1D, 0x31, 0xA5, + 0xF4, 0x1C, 0x31, 0xA7, 0xF4, 0x1F, 0x31, 0xA8, + 0x02, 0x78, 0x00, 0x03, 0xE2, 0x68, 0xF1, 0xC3, + 0x80, 0x67, 0x80, 0xE9, 0x84, 0x4B, 0x03, 0x27, + 0x02, 0x70, 0x00, 0x04, 0x84, 0x41, 0x03, 0x37, + 0x80, 0x07, 0x00, 0x80, 0xE0, 0x00, 0x11, 0xA9, + 0x84, 0x82, 0x00, 0xE0, 0x8E, 0xFC, 0x04, 0x10, + 0xF0, 0x1C, 0x11, 0xAA, 0xF0, 0x1C, 0x11, 0xAB, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x03); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0xF0, 0x1C, 0x11, 0xAC, 0xF0, 0x1F, 0x11, 0xAD, + 0x86, 0xA1, 0x01, 0xC2, 0x80, 0x27, 0x80, 0xE8, + 0x60, 0x00, 0x00, 0x00, 0x84, 0x43, 0x03, 0x37, + 0x80, 0x00, 0x00, 0x81, 0x0D, 0x00, 0x10, 0x20, + 0x84, 0x51, 0x03, 0x3E, 0x08, 0x44, 0x26, 0x30, + 0x84, 0xC3, 0x03, 0x47, 0x84, 0xC2, 0x40, 0xE0, + 0x8C, 0xFF, 0x03, 0x23, 0xE0, 0x10, 0x11, 0xB3, + 0xF0, 0x1C, 0x51, 0xB4, 0xF0, 0x1C, 0x51, 0xB5, + 0xF0, 0x1C, 0x51, 0xB6, 0xF0, 0x1F, 0x51, 0xB7, + 0x86, 0xA1, 0x01, 0xC6, 0x80, 0x27, 0x80, 0xEA, + 0x84, 0x53, 0x03, 0x3E, 0x84, 0x82, 0x04, 0x05, + 0x84, 0x51, 0x03, 0x75, 0xE2, 0x6B, 0xC0, 0x00, + 0x80, 0x07, 0x00, 0x80, 0xE0, 0x80, 0x31, 0xB8, + 0x84, 0x82, 0x40, 0xE0, 0xF0, 0x1C, 0x51, 0xB9, + 0xF0, 0x1C, 0x51, 0xBA, 0xF0, 0x1C, 0x51, 0xBB, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x04); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0xF0, 0x1F, 0x51, 0xBC, 0x86, 0xA1, 0x01, 0xC5, + 0x80, 0x27, 0x80, 0xEA, 0x60, 0x00, 0x00, 0x00, + 0x80, 0x00, 0x00, 0x81, 0x84, 0xA1, 0x03, 0x4F, + 0xE0, 0x80, 0xA0, 0x00, 0x01, 0x07, 0x11, 0x20, + 0x08, 0x44, 0x26, 0x30, 0x08, 0x00, 0x98, 0x4A, + 0x84, 0x53, 0x03, 0x75, 0x08, 0x00, 0x30, 0x48, + 0x02, 0xCA, 0x00, 0x01, 0x08, 0x60, 0x26, 0x32, + 0x84, 0x51, 0x03, 0x45, 0xE4, 0x10, 0x40, 0x00, + 0x80, 0x40, 0xC0, 0x82, 0x84, 0xC2, 0x40, 0xE0, + 0x84, 0xC3, 0x03, 0x5E, 0x08, 0x00, 0x50, 0x48, + 0xE0, 0x10, 0x11, 0xBD, 0x02, 0xC2, 0x00, 0x02, + 0x08, 0x60, 0x06, 0x12, 0x84, 0xD3, 0x03, 0x4F, + 0xF0, 0x1C, 0x51, 0xBE, 0xF0, 0x1C, 0x51, 0xBF, + 0xF0, 0x1C, 0x51, 0xC0, 0xF0, 0x1F, 0x51, 0xC1, + 0x84, 0xA1, 0x03, 0x65, 0x80, 0x27, 0x80, 0xEA, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x05); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0xE0, 0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0x83, + 0x08, 0x00, 0x98, 0x6B, 0x08, 0x00, 0x30, 0x68, + 0x84, 0x53, 0x03, 0x45, 0x08, 0x60, 0x26, 0x33, + 0x84, 0x51, 0x03, 0x25, 0xE4, 0x10, 0x60, 0x00, + 0x80, 0x40, 0xC0, 0x81, 0x02, 0x70, 0x00, 0x7F, + 0x08, 0x00, 0x50, 0x28, 0x08, 0x60, 0x06, 0x11, + 0x84, 0xCB, 0x03, 0x65, 0xE0, 0x10, 0x51, 0xC4, + 0x84, 0x80, 0x41, 0x00, 0x02, 0xA3, 0x00, 0x10, + 0xE4, 0x00, 0x00, 0x00, 0x84, 0xD0, 0x04, 0x01, + 0x84, 0xA2, 0x04, 0x03, 0x84, 0xD2, 0x50, 0x01, + 0x84, 0x53, 0x03, 0x25, 0x80, 0x00, 0xC4, 0x04, + 0x8F, 0x30, 0x00, 0x00, 0x88, 0x67, 0x03, 0x00, + 0xE4, 0x00, 0x11, 0x9B, 0xEE, 0x64, 0x60, 0x00, + 0x02, 0xD3, 0x00, 0x10, 0x88, 0x47, 0x00, 0x80, + 0x10, 0x00, 0x18, 0x02, 0x86, 0xC1, 0x01, 0x9D, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x06); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0xE0, 0x10, 0x31, 0xC7, 0x86, 0xC9, 0x01, 0x9E, + 0x80, 0x00, 0xC4, 0x02, 0x02, 0x50, 0x01, 0x9C, + 0x00, 0xFF, 0x21, 0x65, 0x00, 0xFC, 0x00, 0x00, + 0x02, 0x60, 0x00, 0x01, 0x02, 0x70, 0x00, 0x04, + 0x84, 0xC8, 0x04, 0x10, 0x84, 0x41, 0x03, 0x67, + 0x84, 0x51, 0x03, 0x6D, 0x84, 0xC0, 0x04, 0x02, + 0x04, 0x80, 0x91, 0x20, 0x08, 0x60, 0x26, 0x30, + 0x02, 0x78, 0x00, 0x03, 0x02, 0x68, 0x00, 0x02, + 0x0D, 0x00, 0x10, 0x10, 0x08, 0x60, 0x06, 0x12, + 0x84, 0x49, 0x03, 0x2F, 0xE0, 0x80, 0x71, 0xA9, + 0x02, 0x28, 0x03, 0x55, 0x84, 0x82, 0x00, 0xE0, + 0x84, 0x2A, 0x04, 0x00, 0xF0, 0x1C, 0x11, 0xAA, + 0xF0, 0x1C, 0x11, 0xAB, 0xF0, 0x1C, 0x11, 0xAC, + 0xF0, 0x1F, 0x11, 0xAD, 0x86, 0xA1, 0x01, 0xAE, + 0x80, 0x27, 0x80, 0xE8, 0x84, 0x82, 0x04, 0x07, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x07); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0xE0, 0x80, 0x60, 0x00, 0x84, 0x82, 0x40, 0xE0, + 0x84, 0x43, 0x03, 0x67, 0xF0, 0x1C, 0x51, 0xAF, + 0xF0, 0x1C, 0x51, 0xB0, 0xF0, 0x1C, 0x51, 0xB1, + 0xF0, 0x1F, 0x51, 0xB2, 0x02, 0x78, 0x00, 0x05, + 0x80, 0x27, 0x80, 0xEA, 0x84, 0x82, 0x04, 0x08, + 0x02, 0x70, 0x00, 0x06, 0x84, 0x53, 0x03, 0x6D, + 0x84, 0x80, 0x04, 0x07, 0xE0, 0x00, 0x00, 0x82, + 0xF0, 0x81, 0x00, 0x80, 0x80, 0x07, 0x12, 0xBC, + 0x86, 0xA1, 0x01, 0x9F, 0xE2, 0x57, 0xA0, 0x00, + 0x84, 0x82, 0x04, 0x09, 0x84, 0x82, 0x20, 0xE0, + 0xF0, 0x1C, 0x31, 0xA0, 0xF0, 0x1C, 0x31, 0xA1, + 0xF0, 0x1C, 0x31, 0xA2, 0xF0, 0x1F, 0x31, 0xA3, + 0xE4, 0x00, 0x11, 0xA6, 0x80, 0x27, 0x80, 0xE1, + 0xF4, 0x00, 0x11, 0xA4, 0xF4, 0x1D, 0x31, 0xA5, + 0xF4, 0x1C, 0x31, 0xA7, 0xF4, 0x1F, 0x31, 0xA8, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x08); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x02, 0x78, 0x00, 0x03, 0xE2, 0x6A, 0xF1, 0xC3, + 0x80, 0x67, 0x80, 0xE9, 0x84, 0x4B, 0x03, 0x2F, + 0x02, 0x70, 0x00, 0x04, 0x84, 0x59, 0x03, 0x3D, + 0x80, 0x07, 0x00, 0x80, 0xE0, 0x00, 0x11, 0xA9, + 0x84, 0x82, 0x60, 0xE0, 0x8E, 0xFC, 0x04, 0x10, + 0xF0, 0x1C, 0x71, 0xAA, 0xF0, 0x1C, 0x71, 0xAB, + 0xF0, 0x1C, 0x71, 0xAC, 0xF0, 0x1F, 0x71, 0xAD, + 0x86, 0xA1, 0x01, 0xC2, 0x80, 0x27, 0x80, 0xEB, + 0x60, 0x00, 0x00, 0x00, 0x84, 0x5B, 0x03, 0x3D, + 0x80, 0x00, 0x00, 0x81, 0x0D, 0x00, 0x10, 0x20, + 0x84, 0x59, 0x03, 0x3F, 0x08, 0x44, 0x26, 0x30, + 0x84, 0xC3, 0x03, 0x57, 0x84, 0xC2, 0x60, 0xE0, + 0xE0, 0x10, 0x11, 0xB3, 0xF0, 0x1C, 0x71, 0xB4, + 0xF0, 0x1C, 0x71, 0xB5, 0xF0, 0x1C, 0x71, 0xB6, + 0xF0, 0x1F, 0x71, 0xB7, 0x86, 0xA1, 0x01, 0xC6, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x09); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x80, 0x27, 0x80, 0xEB, 0x84, 0x5B, 0x03, 0x3F, + 0x84, 0x82, 0x04, 0x0D, 0x84, 0x41, 0x03, 0x76, + 0xE2, 0x6B, 0xE0, 0x00, 0x80, 0x07, 0x00, 0x80, + 0xE0, 0x81, 0x31, 0xB8, 0x84, 0x82, 0x00, 0xE0, + 0xF0, 0x1C, 0x11, 0xB9, 0xF0, 0x1C, 0x11, 0xBA, + 0xF0, 0x1C, 0x11, 0xBB, 0xF0, 0x1F, 0x11, 0xBC, + 0x86, 0xA1, 0x01, 0xC5, 0x80, 0x27, 0x80, 0xE8, + 0x60, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x81, + 0x84, 0xA1, 0x03, 0x5D, 0xE0, 0x81, 0xA0, 0x00, + 0x01, 0x07, 0x11, 0x20, 0x08, 0x44, 0x26, 0x30, + 0x08, 0x00, 0x98, 0x4A, 0x84, 0x43, 0x03, 0x76, + 0x08, 0x00, 0x30, 0x48, 0x02, 0xCA, 0x00, 0x01, + 0x08, 0x60, 0x26, 0x32, 0x84, 0x41, 0x03, 0x46, + 0xE4, 0x10, 0x40, 0x00, 0x80, 0x40, 0xC0, 0x82, + 0x84, 0xC2, 0x00, 0xE0, 0x84, 0xC3, 0x03, 0x5F, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x0A); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x08, 0x00, 0x50, 0x48, 0xE0, 0x10, 0x11, 0xBD, + 0x02, 0xC2, 0x00, 0x02, 0x08, 0x60, 0x06, 0x12, + 0x84, 0xD3, 0x03, 0x5D, 0xF0, 0x1C, 0x11, 0xBE, + 0xF0, 0x1C, 0x11, 0xBF, 0xF0, 0x1C, 0x11, 0xC0, + 0xF0, 0x1F, 0x11, 0xC1, 0x84, 0xA1, 0x03, 0x66, + 0x80, 0x27, 0x80, 0xE8, 0xE0, 0x00, 0x00, 0x00, + 0x80, 0x07, 0x00, 0x83, 0x08, 0x00, 0x98, 0x6B, + 0x08, 0x00, 0x30, 0x68, 0x84, 0x43, 0x03, 0x46, + 0x08, 0x60, 0x26, 0x33, 0x84, 0x51, 0x03, 0x26, + 0xE4, 0x10, 0x60, 0x00, 0x80, 0x40, 0xC0, 0x81, + 0x02, 0x70, 0x00, 0x7F, 0x08, 0x00, 0x50, 0x28, + 0x08, 0x60, 0x06, 0x11, 0x8C, 0xFF, 0x03, 0x24, + 0x84, 0xCB, 0x03, 0x66, 0xE0, 0x10, 0x51, 0xC4, + 0x84, 0x80, 0x41, 0x00, 0x02, 0xA3, 0x00, 0x10, + 0xE4, 0x00, 0x00, 0x00, 0x84, 0xD0, 0x04, 0x09, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x0B); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x84, 0xA2, 0x04, 0x0B, 0x84, 0xD2, 0x50, 0x01, + 0x84, 0x53, 0x03, 0x26, 0x80, 0x00, 0xC4, 0x0C, + 0x8F, 0x30, 0x00, 0x00, 0x88, 0x67, 0x03, 0x00, + 0xE4, 0x00, 0x11, 0x9B, 0xEE, 0x64, 0x80, 0x00, + 0x02, 0xD3, 0x00, 0x10, 0x88, 0x47, 0x00, 0x80, + 0x10, 0x00, 0x18, 0x02, 0x86, 0xC1, 0x01, 0x9D, + 0xE0, 0x10, 0x31, 0xC7, 0x86, 0xC9, 0x01, 0x9E, + 0x80, 0x00, 0xC4, 0x0A, 0x02, 0x50, 0x01, 0x9C, + 0x00, 0xFF, 0x21, 0x65, 0x00, 0xFC, 0x00, 0x00, + 0x02, 0x70, 0x00, 0x04, 0x02, 0x68, 0x00, 0x01, + 0x02, 0x60, 0x00, 0x03, 0x02, 0x78, 0x00, 0x02, + 0x84, 0x49, 0x03, 0x6E, 0x84, 0x41, 0x03, 0x6F, + 0x84, 0xC8, 0x04, 0x10, 0x84, 0xC0, 0x04, 0x0A, + 0x04, 0x81, 0x91, 0x20, 0x08, 0x60, 0x26, 0x30, + 0x0D, 0x00, 0x10, 0x10, 0x08, 0x60, 0x06, 0x12, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x0C); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x84, 0x00, 0x04, 0x06, 0xE0, 0x81, 0x71, 0xA9, + 0x84, 0x82, 0x20, 0xE8, 0xF0, 0x1D, 0x31, 0xAA, + 0xF0, 0x1D, 0x31, 0xAB, 0xF0, 0x1D, 0x31, 0xAC, + 0xF0, 0x1C, 0x31, 0xAD, 0x86, 0xA1, 0x01, 0xAE, + 0x80, 0x27, 0x80, 0xF9, 0x84, 0x82, 0x04, 0x0E, + 0xE0, 0x81, 0x60, 0x00, 0x84, 0x82, 0x00, 0xE8, + 0x84, 0x4B, 0x03, 0x6E, 0xF0, 0x1D, 0x11, 0xAF, + 0xF0, 0x1D, 0x11, 0xB0, 0xF0, 0x1D, 0x11, 0xB1, + 0xF0, 0x1C, 0x11, 0xB2, 0x02, 0xA3, 0x00, 0x1A, + 0x80, 0x27, 0x80, 0xF8, 0x84, 0x82, 0x04, 0x0F, + 0xE0, 0x81, 0xC0, 0x00, 0xF0, 0x81, 0xE0, 0x80, + 0x84, 0x43, 0x03, 0x6F, 0x80, 0x07, 0x12, 0xBD, + 0x02, 0xC0, 0x00, 0x00, 0x00, 0xFC, 0x50, 0x00, + 0x8F, 0x00, 0x00, 0x11, 0x8F, 0x00, 0xFF, 0xFF, + 0x84, 0x58, 0x04, 0x01, 0x84, 0xC2, 0x04, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x0D); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x02, 0xC2, 0x60, 0x00, 0x84, 0xA0, 0x61, 0x00, + 0xE0, 0x20, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, + 0x40, 0x40, 0xA0, 0x00, 0x80, 0x00, 0xC0, 0x82, + 0x08, 0xFC, 0x48, 0x3A, 0x08, 0xFC, 0x18, 0x50, + 0x00, 0xFC, 0x00, 0x00, 0xE0, 0x10, 0x00, 0x00, + 0x86, 0xA0, 0x41, 0x00, 0x40, 0x47, 0x20, 0x00, + 0x80, 0x00, 0xC0, 0x83, 0x04, 0xE0, 0x3D, 0x1E, + 0x04, 0x80, 0x11, 0xE0, 0x08, 0x44, 0x26, 0x33, + 0x02, 0xCB, 0x00, 0x10, 0xE0, 0x10, 0x40, 0x83, + 0x08, 0x00, 0x28, 0x21, 0x84, 0xCA, 0x61, 0x00, + 0x80, 0x07, 0x00, 0x81, 0x0C, 0xE0, 0x2C, 0x09, + 0x84, 0xCA, 0x21, 0x00, 0x00, 0xFC, 0x50, 0x00, + 0x8F, 0x00, 0x00, 0x01, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_book(dev, 0x78); + if (res < 0) + return res; + + res = tas5825m_set_page(dev, 0x18); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x30, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x1B); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x00, 0x03, 0x80, 0x00, 0x00, 0x04, 0x00, + 0x00, 0x00, 0x03, 0x28, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x6C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x1C); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + { + const uint8_t values[] = { + 0x00, 0x00, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x1C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + { + const uint8_t values[] = { + 0x00, 0x00, 0x03, 0x38, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x3C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + { + const uint8_t values[] = { + 0x00, 0x00, 0x03, 0x40, 0x00, 0x00, 0x03, 0x48, + 0x00, 0x00, 0x03, 0x50, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x54, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + { + const uint8_t values[] = { + 0x00, 0x00, 0x03, 0x58, 0x00, 0x00, 0x03, 0x60, + 0x00, 0x00, 0x00, 0x00, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x74, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x1D); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + { + const uint8_t values[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x1C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + { + const uint8_t values[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x3C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x1E); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x00, 0x00, 0x00, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + { + const uint8_t values[] = { + 0x00, 0x00, 0x03, 0x68, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x0C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + { + const uint8_t values[] = { + 0x00, 0x00, 0x03, 0x70, 0x00, 0x00, 0x03, 0x78, + 0x00, 0x00, 0x04, 0x80, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x24, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + { + const uint8_t values[] = { + 0x00, 0x00, 0x04, 0x88, 0x00, 0x00, 0x04, 0x90, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x44, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_book(dev, 0x8C); + if (res < 0) + return res; + + res = tas5825m_set_page(dev, 0x0E); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0xA7, 0x26, 0x4A, 0x7F, 0xFF, 0xFF, 0xFF, + 0x00, 0x20, 0xC4, 0x9C, 0x00, 0x20, 0xC4, 0x9C, + 0x00, 0x00, 0x68, 0xDB, 0x00, 0x00, 0xD1, 0xB7, + 0x00, 0x00, 0x68, 0xDB, 0x0F, 0xA4, 0xA8, 0xC1, + 0xF8, 0x59, 0x7F, 0x63, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x5C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x0F); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x07, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x2F, 0xB7, 0xE9, + 0x00, 0x5F, 0x6F, 0xD2, 0x00, 0x2F, 0xB7, 0xE9, + 0x0B, 0x1E, 0x4F, 0x76, 0xFC, 0x23, 0x05, 0x54, + 0xFA, 0x41, 0x20, 0x5C, 0x0B, 0x7D, 0xBF, 0x48, + 0xFA, 0x41, 0x20, 0x5C, 0x0B, 0x1E, 0x4F, 0x76, + 0xFC, 0x23, 0x05, 0x54, 0x00, 0x04, 0x81, 0x6F, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0F, 0x3F, 0xE5, 0xC9, 0xF8, 0xBB, 0x98, 0xC8, + 0x07, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x81, 0x6F, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0F, 0x3F, 0xE5, 0xC9, 0xF8, 0xBB, 0x98, 0xC8, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x10); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x89, 0xA0, 0x27, 0x7F, 0xEC, 0x56, 0xD5, + 0x7F, 0xFC, 0xB9, 0x23, 0x00, 0x89, 0xA0, 0x27, + 0x7F, 0xEC, 0x56, 0xD5, 0x7F, 0xFC, 0xB9, 0x23, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_book(dev, 0x00); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x40, 0x00); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x11, 0xFF, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x7D, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x01); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x51, 0x05); + if (res < 0) + return res; + + res = tas5825m_set_page(dev, 0x02); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x19, 0xDF); + if (res < 0) + return res; + + res = tas5825m_set_page(dev, 0x00); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x46, 0x11); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x02, 0x00); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x53, 0x01); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x54, 0x00); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x03, 0x02); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x7F, 0x8C); + if (res < 0) + return res; + + res = tas5825m_set_page(dev, 0x01); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x71, 0x94, 0x9A, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x2C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x0A); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x64, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x0B); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x80, 0x00, 0x00, 0x00, 0x28, 0x7A, 0x27, + 0x00, 0x28, 0x7A, 0x27, 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + { + const uint8_t values[] = { + 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x57, 0x62, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x28, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x0E); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x03, 0x69, 0xC5, 0x01, 0x24, 0x02, 0xCB, + 0x00, 0x22, 0x1D, 0x95, 0x00, 0x03, 0x69, 0xC5, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x5C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x0F); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x7F, 0xF9, 0x2C, 0x60, 0x09, 0xC6, 0x4C, 0xCF, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x5C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x07); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x80, 0x00, 0x00, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x64, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + { + const uint8_t values[] = { + 0x40, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x6C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_book(dev, 0xAA); + if (res < 0) + return res; + + res = tas5825m_set_page(dev, 0x01); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x05, 0xA9, 0xDF, 0x7B, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x30, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x02); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x03); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x07, 0xE0, 0x03, 0x27, 0xF0, 0x3F, 0xF9, 0xB1, + 0x07, 0xE0, 0x03, 0x27, 0x0F, 0xBF, 0xC1, 0x46, + 0xF8, 0x3F, 0xB4, 0xA8, 0x07, 0xE8, 0x73, 0x5B, + 0xF0, 0x2F, 0x19, 0x4B, 0x07, 0xE8, 0x73, 0x5B, + 0x0F, 0xD0, 0xA1, 0x62, 0xF8, 0x2E, 0xD3, 0xF8, + 0x07, 0xE8, 0x65, 0x1C, 0xF0, 0x4C, 0x95, 0x0B, + 0x07, 0xCC, 0x6D, 0xBC, 0x0F, 0xB3, 0x6A, 0xF5, + 0xF8, 0x4B, 0x2D, 0x28, 0x08, 0x1D, 0xB8, 0xB2, + 0xF0, 0x12, 0x40, 0x2B, 0x07, 0xD1, 0x74, 0x3E, + 0x0F, 0xEE, 0x30, 0x8F, 0xF8, 0x11, 0x43, 0xC9, + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x04); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x05); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x07, 0xE0, 0x03, 0x27, + 0xF0, 0x3F, 0xF9, 0xB1, 0x07, 0xE0, 0x03, 0x27, + 0x0F, 0xBF, 0xC1, 0x46, 0xF8, 0x3F, 0xB4, 0xA8, + 0x07, 0xE8, 0x73, 0x5B, 0xF0, 0x2F, 0x19, 0x4B, + 0x07, 0xE8, 0x73, 0x5B, 0x0F, 0xD0, 0xA1, 0x62, + 0xF8, 0x2E, 0xD3, 0xF8, 0x07, 0xE8, 0x65, 0x1C, + 0xF0, 0x4C, 0x95, 0x0B, 0x07, 0xCC, 0x6D, 0xBC, + 0x0F, 0xB3, 0x6A, 0xF5, 0xF8, 0x4B, 0x2D, 0x28, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x06); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x08, 0x1D, 0xB8, 0xB2, 0xF0, 0x12, 0x40, 0x2B, + 0x07, 0xD1, 0x74, 0x3E, 0x0F, 0xEE, 0x30, 0x8F, + 0xF8, 0x11, 0x43, 0xC9, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x0E); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x00, 0x88, 0xF4, 0xB0, 0xFF, 0x02, 0x86, 0x19, + 0x00, 0x75, 0xF1, 0x4C, 0x0F, 0xE2, 0x49, 0x11, + 0xF8, 0x1C, 0x4A, 0xDB, 0x00 + }; + res = tas5825m_write_block_at(dev, 0x6C, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_page(dev, 0x0F); + if (res < 0) + return res; + + { + const uint8_t values[] = { + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xFF, 0xF4, 0x49, 0x81, + 0xFF, 0xE8, 0x93, 0x02, 0xFF, 0xF4, 0x49, 0x81, + 0x0D, 0x94, 0x7A, 0x64, 0xFA, 0x3C, 0xAB, 0xA1, + 0x06, 0xD5, 0xF3, 0xB1, 0xF2, 0x54, 0x18, 0x9F, + 0x06, 0xD5, 0xF3, 0xB1, 0x0D, 0x94, 0x7A, 0x64, + 0xFA, 0x3C, 0xAB, 0xA1, 0x00, 0x00, 0x38, 0xE4, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0F, 0xD5, 0x55, 0x55, 0xF8, 0x2A, 0x71, 0xC7, + 0x00 + }; + res = tas5825m_write_block_at(dev, 0x08, values, ARRAY_SIZE(values)); + if (res < 0) + return res; + } + + res = tas5825m_set_book(dev, 0x00); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x30, 0x00); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x60, 0x02); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x62, 0x09); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x4C, 0x30); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x03, 0x03); + if (res < 0) + return res; + + res = tas5825m_write_at(dev, 0x78, 0x80); + if (res < 0) + return res; + + res = tas5825m_set_page(dev, 0x00); + if (res < 0) + return res; + + return 0; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/82596?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I11cf2dbd1512ebae44e0109bdb78e6eafa027444 Gerrit-Change-Number: 82596 Gerrit-PatchSet: 1 Gerrit-Owner: Tim Crawford <tcrawford(a)system76.com> [View Less]

1 0

[L] Change in coreboot[main]: mb/system76/rpl: Add Adder WS 4 as a variant
by Tim Crawford (Code Review) 21 May '24

21 May '24

Attention is currently required from: Jeremy Soller. Hello Jeremy Soller, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/coreboot/+/82595?usp=email to look at the new patch set (#3). Change subject: mb/system76/rpl: Add Adder WS 4 as a variant ...................................................................... mb/system76/rpl: Add Adder WS 4 as a variant The Adder WS 4 (addw4) is a Raptor Lake-HX board. Tested with a custom edk2 UefiPayloadPkg. … [View More]

1 0

[L] Change in coreboot[main]: mb/system76/rpl: Add Adder WS 4 as a variant
by Tim Crawford (Code Review) 21 May '24

21 May '24

Attention is currently required from: Jeremy Soller. Hello Jeremy Soller, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/coreboot/+/82595?usp=email to look at the new patch set (#2). Change subject: mb/system76/rpl: Add Adder WS 4 as a variant ...................................................................... mb/system76/rpl: Add Adder WS 4 as a variant The Adder WS 4 (addw4) is a Raptor Lake-HX board. Tested with a custom edk2 UefiPayloadPkg. … [View More]

1 0

[M] Change in coreboot[main]: libpayload: x86: Move Multiboot header to include file
by Julius Werner (Code Review) 21 May '24

21 May '24

Attention is currently required from: Subrata Banik. Julius Werner has posted comments on this change by Subrata Banik. ( https://review.coreboot.org/c/coreboot/+/82533?usp=email ) Change subject: libpayload: x86: Move Multiboot header to include file ...................................................................... Patch Set 7: Code-Review+2 (2 comments) Patchset: PS7: LGTM after one issue File payloads/libpayload/arch/x86/multiboot_header.inc: https://review.coreboot.org/c/… [View More]

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit May 2024