coreboot-gerrit April 2020

coreboot-gerrit@coreboot.org

1 participants
2501 discussions

Change in coreboot[master]: mb/google/auron: Add support for ACPI backlight controls
by Matt DeVillier (Code Review) 03 Apr '20

03 Apr '20

Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39944 ) Change subject: mb/google/auron: Add support for ACPI backlight controls ...................................................................... mb/google/auron: Add support for ACPI backlight controls Test: build/boot lulu and samus variants, verify backlight control functional under Windows 10. Change-Id: I4725fdea5206ae03df14a8b07e51fdf09f1edebd Signed-off-by: Matt DeVillier <matt.devillier(a)gmail.com> --- M src/mainboard/google/auron/devicetree.cb M src/mainboard/google/auron/dsdt.asl 2 files changed, 4 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/44/39944/1 diff --git a/src/mainboard/google/auron/devicetree.cb b/src/mainboard/google/auron/devicetree.cb index 35074b4..f28a508 100644 --- a/src/mainboard/google/auron/devicetree.cb +++ b/src/mainboard/google/auron/devicetree.cb @@ -1,5 +1,8 @@ chip soc/intel/broadwell + # IGD Displays + register "gfx" = "GMA_STATIC_DISPLAYS(0)" + # Enable eDP Hotplug with 6ms pulse register "gpu_dp_d_hotplug" = "0x06" diff --git a/src/mainboard/google/auron/dsdt.asl b/src/mainboard/google/auron/dsdt.asl index f7c5000..a22dedd 100644 --- a/src/mainboard/google/auron/dsdt.asl +++ b/src/mainboard/google/auron/dsdt.asl @@ -38,6 +38,7 @@ { #include <soc/intel/broadwell/acpi/systemagent.asl> #include <soc/intel/broadwell/acpi/pch.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> } } -- To view, visit https://review.coreboot.org/c/coreboot/+/39944 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4725fdea5206ae03df14a8b07e51fdf09f1edebd Gerrit-Change-Number: 39944 Gerrit-PatchSet: 1 Gerrit-Owner: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-MessageType: newchange

3 3

Change in coreboot[master]: soc/intel/skylake: vr_config: enable PSI3 and PSI4 by default
by 9elements QA (Code Review) 03 Apr '20

03 Apr '20

9elements QA has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/39980 ) Change subject: soc/intel/skylake: vr_config: enable PSI3 and PSI4 by default ...................................................................... Patch Set 8: Automatic boot test returned (PASS/FAIL/TOTAL): 3/0/3 Emulation targets: EMULATION_QEMU_X86_Q35 using payload TianoCore : SUCCESS : https://lava.9esec.io/r/2024 EMULATION_QEMU_X86_Q35 using payload SeaBIOS : SUCCESS : https://lava.9esec.io/r/2023 EMULATION_QEMU_X86_I440FX using payload SeaBIOS : SUCCESS : https://lava.9esec.io/r/2022 Please note: This test is under development and might not be accurate at all! -- To view, visit https://review.coreboot.org/c/coreboot/+/39980 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I5b5fd9fb3b9b89e80c47f15d706e2dd62dcc0748 Gerrit-Change-Number: 39980 Gerrit-PatchSet: 8 Gerrit-Owner: Michael Niewöhner Gerrit-Reviewer: Aaron Durbin <adurbin(a)chromium.org> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Benjamin Doron <benjamin.doron00(a)gmail.com> Gerrit-Reviewer: Christian Walter <christian.walter(a)9elements.com> Gerrit-Reviewer: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-Reviewer: Matthew Garrett <mjg59(a)google.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: 9elements QA <hardwaretestrobot(a)gmail.com> Gerrit-Comment-Date: Fri, 03 Apr 2020 16:34:59 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: No Gerrit-MessageType: comment

1 0

Change in coreboot[master]: mb/google/rambi: Disable console output by defualt
by Matt DeVillier (Code Review) 03 Apr '20

03 Apr '20

Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39997 ) Change subject: mb/google/rambi: Disable console output by defualt ...................................................................... mb/google/rambi: Disable console output by defualt Disable SoC serial output by default, since no production devices have this exposed, but leave it as a user option so it can be selected as needed (eg, for use with a Google debug servo). Same change as made for google/cyan in CB:39872 Change-Id: Id6b2c28658aca03d8c5042d719a0f6f504c29288 Signed-off-by: Matt DeVillier <matt.devillier(a)gmail.com> --- M src/mainboard/google/rambi/Kconfig 1 file changed, 6 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/97/39997/1 diff --git a/src/mainboard/google/rambi/Kconfig b/src/mainboard/google/rambi/Kconfig index d820875..62b0229 100644 --- a/src/mainboard/google/rambi/Kconfig +++ b/src/mainboard/google/rambi/Kconfig @@ -4,7 +4,6 @@ select SOC_INTEL_BAYTRAIL select EC_GOOGLE_CHROMEEC select EC_GOOGLE_CHROMEEC_LPC - select ENABLE_BUILTIN_COM1 select BOARD_ROMSIZE_KB_8192 select HAVE_ACPI_TABLES select HAVE_OPTION_TABLE @@ -76,4 +75,10 @@ string default "GOOGLE" +config CONSOLE_SERIAL + default n + +config ENABLE_BUILTIN_COM1 + default y if CONSOLE_SERIAL + endif # BOARD_GOOGLE_BASEBOARD_RAMBI -- To view, visit https://review.coreboot.org/c/coreboot/+/39997 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id6b2c28658aca03d8c5042d719a0f6f504c29288 Gerrit-Change-Number: 39997 Gerrit-PatchSet: 1 Gerrit-Owner: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-MessageType: newchange

2 8

Change in coreboot[master]: mb/google/rambi: Convert to use override devicetree
by Matt DeVillier (Code Review) 03 Apr '20

03 Apr '20

Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39996 ) Change subject: mb/google/rambi: Convert to use override devicetree ...................................................................... mb/google/rambi: Convert to use override devicetree Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Change-Id: I52b71cf12a4e0b67135cfb106c3e89b00205d3bc Signed-off-by: Matt DeVillier <matt.devillier(a)gmail.com> --- M src/mainboard/google/rambi/Kconfig R src/mainboard/google/rambi/devicetree.cb D src/mainboard/google/rambi/variants/banjo/devicetree.cb A src/mainboard/google/rambi/variants/banjo/overridetree.cb D src/mainboard/google/rambi/variants/candy/devicetree.cb A src/mainboard/google/rambi/variants/candy/overridetree.cb D src/mainboard/google/rambi/variants/clapper/devicetree.cb A src/mainboard/google/rambi/variants/clapper/overridetree.cb D src/mainboard/google/rambi/variants/enguarde/devicetree.cb A src/mainboard/google/rambi/variants/enguarde/overridetree.cb D src/mainboard/google/rambi/variants/glimmer/devicetree.cb A src/mainboard/google/rambi/variants/glimmer/overridetree.cb D src/mainboard/google/rambi/variants/gnawty/devicetree.cb A src/mainboard/google/rambi/variants/gnawty/overridetree.cb D src/mainboard/google/rambi/variants/heli/devicetree.cb A src/mainboard/google/rambi/variants/heli/overridetree.cb D src/mainboard/google/rambi/variants/kip/devicetree.cb A src/mainboard/google/rambi/variants/kip/overridetree.cb D src/mainboard/google/rambi/variants/ninja/devicetree.cb A src/mainboard/google/rambi/variants/ninja/overridetree.cb D src/mainboard/google/rambi/variants/orco/devicetree.cb A src/mainboard/google/rambi/variants/orco/overridetree.cb D src/mainboard/google/rambi/variants/quawks/devicetree.cb A src/mainboard/google/rambi/variants/quawks/overridetree.cb D src/mainboard/google/rambi/variants/rambi/devicetree.cb A src/mainboard/google/rambi/variants/rambi/overridetree.cb A src/mainboard/google/rambi/variants/squawks/overridetree.cb D src/mainboard/google/rambi/variants/sumo/devicetree.cb A src/mainboard/google/rambi/variants/sumo/overridetree.cb D src/mainboard/google/rambi/variants/swanky/devicetree.cb A src/mainboard/google/rambi/variants/swanky/overridetree.cb D src/mainboard/google/rambi/variants/winky/devicetree.cb A src/mainboard/google/rambi/variants/winky/overridetree.cb 33 files changed, 159 insertions(+), 1,561 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/96/39996/1 diff --git a/src/mainboard/google/rambi/Kconfig b/src/mainboard/google/rambi/Kconfig index 7a23a7d..d820875 100644 --- a/src/mainboard/google/rambi/Kconfig +++ b/src/mainboard/google/rambi/Kconfig @@ -64,9 +64,9 @@ default "Swanky" if BOARD_GOOGLE_SWANKY default "Winky" if BOARD_GOOGLE_WINKY -config DEVICETREE +config OVERRIDE_DEVICETREE string - default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb" + default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb" config EC_GOOGLE_CHROMEEC_BOARDNAME string diff --git a/src/mainboard/google/rambi/variants/squawks/devicetree.cb b/src/mainboard/google/rambi/devicetree.cb similarity index 96% rename from src/mainboard/google/rambi/variants/squawks/devicetree.cb rename to src/mainboard/google/rambi/devicetree.cb index 4ed27be..dc11ec8 100644 --- a/src/mainboard/google/rambi/variants/squawks/devicetree.cb +++ b/src/mainboard/google/rambi/devicetree.cb @@ -13,7 +13,6 @@ register "usb3_port_disable_mask" = "0x0" # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Squawks board register "usb2_per_port_lane0" = "0x00049a09" register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" register "usb2_per_port_lane1" = "0x00049a09" @@ -74,7 +73,7 @@ device pci 1a.0 off end # TXE device pci 1b.0 on end # HDA device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 + device pci 1c.1 off end # PCIE_PORT2 device pci 1c.2 off end # PCIE_PORT3 device pci 1c.3 off end # PCIE_PORT4 device pci 1d.0 on end # EHCI diff --git a/src/mainboard/google/rambi/variants/banjo/devicetree.cb b/src/mainboard/google/rambi/variants/banjo/devicetree.cb deleted file mode 100644 index 55d9873..0000000 --- a/src/mainboard/google/rambi/variants/banjo/devicetree.cb +++ /dev/null @@ -1,104 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Banjo board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x0" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 off end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 off end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 off end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/banjo/overridetree.cb b/src/mainboard/google/rambi/variants/banjo/overridetree.cb new file mode 100644 index 0000000..e46cc31 --- /dev/null +++ b/src/mainboard/google/rambi/variants/banjo/overridetree.cb @@ -0,0 +1,12 @@ +chip soc/intel/baytrail + + register "sdcard_cap_low" = "0x0" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 12.0 off end # SD + device pci 18.6 on end # I2C6 + end +end diff --git a/src/mainboard/google/rambi/variants/candy/devicetree.cb b/src/mainboard/google/rambi/variants/candy/devicetree.cb deleted file mode 100644 index e048361..0000000 --- a/src/mainboard/google/rambi/variants/candy/devicetree.cb +++ /dev/null @@ -1,105 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Candy board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - register "usb2_comp_bg" = "0x4700" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 on end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 off end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/candy/overridetree.cb b/src/mainboard/google/rambi/variants/candy/overridetree.cb new file mode 100644 index 0000000..dcd001b --- /dev/null +++ b/src/mainboard/google/rambi/variants/candy/overridetree.cb @@ -0,0 +1,11 @@ +chip soc/intel/baytrail + + register "usb2_comp_bg" = "0x4700" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 18.6 on end # I2C6 + end +end diff --git a/src/mainboard/google/rambi/variants/clapper/devicetree.cb b/src/mainboard/google/rambi/variants/clapper/devicetree.cb deleted file mode 100644 index c010af1..0000000 --- a/src/mainboard/google/rambi/variants/clapper/devicetree.cb +++ /dev/null @@ -1,101 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Clapper board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 on end # I2C5 - device pci 18.6 on end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/clapper/overridetree.cb b/src/mainboard/google/rambi/variants/clapper/overridetree.cb new file mode 100644 index 0000000..ce81c2d --- /dev/null +++ b/src/mainboard/google/rambi/variants/clapper/overridetree.cb @@ -0,0 +1,8 @@ +chip soc/intel/baytrail + + device domain 0 on + device pci 18.5 on end # I2C5 + device pci 18.6 on end # I2C6 + device pci 1c.1 on end # PCIE_PORT2 + end +end diff --git a/src/mainboard/google/rambi/variants/enguarde/devicetree.cb b/src/mainboard/google/rambi/variants/enguarde/devicetree.cb deleted file mode 100644 index 0db28d5..0000000 --- a/src/mainboard/google/rambi/variants/enguarde/devicetree.cb +++ /dev/null @@ -1,104 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Enguarde board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 off end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/enguarde/overridetree.cb b/src/mainboard/google/rambi/variants/enguarde/overridetree.cb new file mode 100644 index 0000000..5a0589a --- /dev/null +++ b/src/mainboard/google/rambi/variants/enguarde/overridetree.cb @@ -0,0 +1,9 @@ +chip soc/intel/baytrail + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 1c.1 on end # PCIE_PORT2 + end +end diff --git a/src/mainboard/google/rambi/variants/glimmer/devicetree.cb b/src/mainboard/google/rambi/variants/glimmer/devicetree.cb deleted file mode 100644 index 5e7d646..0000000 --- a/src/mainboard/google/rambi/variants/glimmer/devicetree.cb +++ /dev/null @@ -1,101 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Glimmer board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 on end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/glimmer/overridetree.cb b/src/mainboard/google/rambi/variants/glimmer/overridetree.cb new file mode 100644 index 0000000..37b7c53 --- /dev/null +++ b/src/mainboard/google/rambi/variants/glimmer/overridetree.cb @@ -0,0 +1,7 @@ +chip soc/intel/baytrail + + device domain 0 on + device pci 18.6 on end # I2C6 + device pci 1c.1 on end # PCIE_PORT2 + end +end diff --git a/src/mainboard/google/rambi/variants/gnawty/devicetree.cb b/src/mainboard/google/rambi/variants/gnawty/devicetree.cb deleted file mode 100644 index 3559d99..0000000 --- a/src/mainboard/google/rambi/variants/gnawty/devicetree.cb +++ /dev/null @@ -1,104 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Gnawty board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 off end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/gnawty/overridetree.cb b/src/mainboard/google/rambi/variants/gnawty/overridetree.cb new file mode 100644 index 0000000..5a0589a --- /dev/null +++ b/src/mainboard/google/rambi/variants/gnawty/overridetree.cb @@ -0,0 +1,9 @@ +chip soc/intel/baytrail + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 1c.1 on end # PCIE_PORT2 + end +end diff --git a/src/mainboard/google/rambi/variants/heli/devicetree.cb b/src/mainboard/google/rambi/variants/heli/devicetree.cb deleted file mode 100644 index d6536c3..0000000 --- a/src/mainboard/google/rambi/variants/heli/devicetree.cb +++ /dev/null @@ -1,105 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Heli board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - register "usb2_comp_bg" = "0x4700" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 off end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/heli/overridetree.cb b/src/mainboard/google/rambi/variants/heli/overridetree.cb new file mode 100644 index 0000000..fb59964 --- /dev/null +++ b/src/mainboard/google/rambi/variants/heli/overridetree.cb @@ -0,0 +1,11 @@ +chip soc/intel/baytrail + + register "usb2_comp_bg" = "0x4700" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 1c.1 on end # PCIE_PORT2 + end +end diff --git a/src/mainboard/google/rambi/variants/kip/devicetree.cb b/src/mainboard/google/rambi/variants/kip/devicetree.cb deleted file mode 100644 index 24facb3..0000000 --- a/src/mainboard/google/rambi/variants/kip/devicetree.cb +++ /dev/null @@ -1,104 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Kip board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 off end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/kip/overridetree.cb b/src/mainboard/google/rambi/variants/kip/overridetree.cb new file mode 100644 index 0000000..5a0589a --- /dev/null +++ b/src/mainboard/google/rambi/variants/kip/overridetree.cb @@ -0,0 +1,9 @@ +chip soc/intel/baytrail + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 1c.1 on end # PCIE_PORT2 + end +end diff --git a/src/mainboard/google/rambi/variants/ninja/devicetree.cb b/src/mainboard/google/rambi/variants/ninja/devicetree.cb deleted file mode 100644 index b9e09e0..0000000 --- a/src/mainboard/google/rambi/variants/ninja/devicetree.cb +++ /dev/null @@ -1,105 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Ninja board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - register "usb2_comp_bg" = "0x4700" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 off end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 off end # PCIE_PORT2 - device pci 1c.2 on end # PCIE_PORT3 - device pci 1c.3 on end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/ninja/overridetree.cb b/src/mainboard/google/rambi/variants/ninja/overridetree.cb new file mode 100644 index 0000000..3f67644 --- /dev/null +++ b/src/mainboard/google/rambi/variants/ninja/overridetree.cb @@ -0,0 +1,12 @@ +chip soc/intel/baytrail + + register "usb2_comp_bg" = "0x4700" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 1c.2 on end # PCIE_PORT3 + device pci 1c.3 on end # PCIE_PORT4 + end +end diff --git a/src/mainboard/google/rambi/variants/orco/devicetree.cb b/src/mainboard/google/rambi/variants/orco/devicetree.cb deleted file mode 100644 index c612336..0000000 --- a/src/mainboard/google/rambi/variants/orco/devicetree.cb +++ /dev/null @@ -1,104 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Orco board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 off end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/orco/overridetree.cb b/src/mainboard/google/rambi/variants/orco/overridetree.cb new file mode 100644 index 0000000..5a0589a --- /dev/null +++ b/src/mainboard/google/rambi/variants/orco/overridetree.cb @@ -0,0 +1,9 @@ +chip soc/intel/baytrail + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 1c.1 on end # PCIE_PORT2 + end +end diff --git a/src/mainboard/google/rambi/variants/quawks/devicetree.cb b/src/mainboard/google/rambi/variants/quawks/devicetree.cb deleted file mode 100644 index ee0f38d..0000000 --- a/src/mainboard/google/rambi/variants/quawks/devicetree.cb +++ /dev/null @@ -1,101 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Quawks board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 off end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/quawks/overridetree.cb b/src/mainboard/google/rambi/variants/quawks/overridetree.cb new file mode 100644 index 0000000..76bcf92 --- /dev/null +++ b/src/mainboard/google/rambi/variants/quawks/overridetree.cb @@ -0,0 +1,6 @@ +chip soc/intel/baytrail + + device domain 0 on + device pci 1c.1 on end # PCIE_PORT2 + end +end diff --git a/src/mainboard/google/rambi/variants/rambi/devicetree.cb b/src/mainboard/google/rambi/variants/rambi/devicetree.cb deleted file mode 100644 index 0fb7f14..0000000 --- a/src/mainboard/google/rambi/variants/rambi/devicetree.cb +++ /dev/null @@ -1,105 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Rambi board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - register "usb2_comp_bg" = "0x4700" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 on end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/rambi/overridetree.cb b/src/mainboard/google/rambi/variants/rambi/overridetree.cb new file mode 100644 index 0000000..7ba9463 --- /dev/null +++ b/src/mainboard/google/rambi/variants/rambi/overridetree.cb @@ -0,0 +1,12 @@ +chip soc/intel/baytrail + + register "usb2_comp_bg" = "0x4700" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 18.6 on end # I2C6 + device pci 1c.1 on end # PCIE_PORT2 + end +end diff --git a/src/mainboard/google/rambi/variants/squawks/overridetree.cb b/src/mainboard/google/rambi/variants/squawks/overridetree.cb new file mode 100644 index 0000000..76bcf92 --- /dev/null +++ b/src/mainboard/google/rambi/variants/squawks/overridetree.cb @@ -0,0 +1,6 @@ +chip soc/intel/baytrail + + device domain 0 on + device pci 1c.1 on end # PCIE_PORT2 + end +end diff --git a/src/mainboard/google/rambi/variants/sumo/devicetree.cb b/src/mainboard/google/rambi/variants/sumo/devicetree.cb deleted file mode 100644 index 8f093c6..0000000 --- a/src/mainboard/google/rambi/variants/sumo/devicetree.cb +++ /dev/null @@ -1,105 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Sumo board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - register "usb2_comp_bg" = "0x4700" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 on end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 off end # PCIE_PORT2 - device pci 1c.2 on end # PCIE_PORT3 - device pci 1c.3 on end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/sumo/overridetree.cb b/src/mainboard/google/rambi/variants/sumo/overridetree.cb new file mode 100644 index 0000000..35052dc --- /dev/null +++ b/src/mainboard/google/rambi/variants/sumo/overridetree.cb @@ -0,0 +1,13 @@ +chip soc/intel/baytrail + + register "usb2_comp_bg" = "0x4700" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 18.6 on end # I2C6 + device pci 1c.2 on end # PCIE_PORT3 + device pci 1c.3 on end # PCIE_PORT4 + end +end diff --git a/src/mainboard/google/rambi/variants/swanky/devicetree.cb b/src/mainboard/google/rambi/variants/swanky/devicetree.cb deleted file mode 100644 index 57f8910..0000000 --- a/src/mainboard/google/rambi/variants/swanky/devicetree.cb +++ /dev/null @@ -1,104 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Swanky board - register "usb2_per_port_lane0" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 off end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/swanky/overridetree.cb b/src/mainboard/google/rambi/variants/swanky/overridetree.cb new file mode 100644 index 0000000..5a0589a --- /dev/null +++ b/src/mainboard/google/rambi/variants/swanky/overridetree.cb @@ -0,0 +1,9 @@ +chip soc/intel/baytrail + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 1c.1 on end # PCIE_PORT2 + end +end diff --git a/src/mainboard/google/rambi/variants/winky/devicetree.cb b/src/mainboard/google/rambi/variants/winky/devicetree.cb deleted file mode 100644 index ed582ad..0000000 --- a/src/mainboard/google/rambi/variants/winky/devicetree.cb +++ /dev/null @@ -1,105 +0,0 @@ -chip soc/intel/baytrail - - # SATA port enable mask (2 ports) - register "sata_port_map" = "0x1" - register "sata_ahci" = "0x1" - register "ide_legacy_combined" = "0x0" - - # Route USB ports to XHCI - register "usb_route_to_xhci" = "1" - - # USB Port Disable Mask - register "usb2_port_disable_mask" = "0x0" - register "usb3_port_disable_mask" = "0x0" - - # USB PHY settings - # TODO: These values are from Baytrail and need tuned for Winky board - register "usb2_comp_bg" = "0x4680" - register "usb2_per_port_lane0" = "0x0004C209" - register "usb2_per_port_rcomp_hs_pullup0" = "0x0300401d" - register "usb2_per_port_lane1" = "0x00049a09" - register "usb2_per_port_rcomp_hs_pullup1" = "0x0300401d" - register "usb2_per_port_lane2" = "0x00049209" - register "usb2_per_port_rcomp_hs_pullup2" = "0x01004015" - register "usb2_per_port_lane3" = "0x0004B209" - register "usb2_per_port_rcomp_hs_pullup3" = "0x0300401d" - - # LPE audio codec settings - register "lpe_codec_clk_freq" = "25" # 25MHz clock - register "lpe_codec_clk_num" = "0" # PMC_PLT_CLK[0] - - # SD Card controller - register "sdcard_cap_low" = "0x036864b2" - register "sdcard_cap_high" = "0x0" - - # Enable devices in ACPI mode - register "lpe_acpi_mode" = "1" - register "lpss_acpi_mode" = "1" - register "scc_acpi_mode" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - # Enable PIPEA as DP_C - register "gpu_pipea_port_select" = "2" # DP_C - register "gpu_pipea_power_cycle_delay" = "6" # 600ms - register "gpu_pipea_power_on_delay" = "5000" # 500ms - register "gpu_pipea_light_on_delay" = "70" # 7ms - register "gpu_pipea_power_off_delay" = "500" # 50ms - register "gpu_pipea_light_off_delay" = "2000" # 200ms - - # VR PS2 control - register "vnn_ps2_enable" = "1" - register "vcc_ps2_enable" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # SoC router - device pci 02.0 on end # GFX - device pci 11.0 off end # SDIO - device pci 12.0 on end # SD - device pci 13.0 on end # SATA - device pci 14.0 on end # XHCI - device pci 15.0 on end # LPE - device pci 17.0 on end # MMC - device pci 18.0 on end # SIO_DMA1 - device pci 18.1 on end # I2C1 - device pci 18.2 on end # I2C2 - device pci 18.3 off end # I2C3 - device pci 18.4 off end # I2C4 - device pci 18.5 off end # I2C5 - device pci 18.6 off end # I2C6 - device pci 18.7 off end # I2C7 - device pci 1a.0 off end # TXE - device pci 1b.0 on end # HDA - device pci 1c.0 on end # PCIE_PORT1 - device pci 1c.1 on end # PCIE_PORT2 - device pci 1c.2 off end # PCIE_PORT3 - device pci 1c.3 off end # PCIE_PORT4 - device pci 1d.0 on end # EHCI - device pci 1e.0 on end # SIO_DMA2 - device pci 1e.1 off end # PWM1 - device pci 1e.2 off end # PWM2 - device pci 1e.3 off end # HSUART1 - device pci 1e.4 off end # HSUART2 - device pci 1e.5 off end # SPI - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - # We only have one init function that - # we need to call to initialize the - # keyboard part of the EC. - device pnp ff.1 on # dummy address - end - end - end # LPC Bridge - device pci 1f.3 off end # SMBus - end -end diff --git a/src/mainboard/google/rambi/variants/winky/overridetree.cb b/src/mainboard/google/rambi/variants/winky/overridetree.cb new file mode 100644 index 0000000..d09ecbc --- /dev/null +++ b/src/mainboard/google/rambi/variants/winky/overridetree.cb @@ -0,0 +1,13 @@ +chip soc/intel/baytrail + + register "usb2_per_port_lane0" = "0x0004C209" + register "usb2_per_port_lane3" = "0x0004B209" + register "usb2_comp_bg" = "0x4680" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device domain 0 on + device pci 1c.1 on end # PCIE_PORT2 + end +end -- To view, visit https://review.coreboot.org/c/coreboot/+/39996 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I52b71cf12a4e0b67135cfb106c3e89b00205d3bc Gerrit-Change-Number: 39996 Gerrit-PatchSet: 1 Gerrit-Owner: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-MessageType: newchange

2 5

Change in coreboot[master]: mb/google/cyan: Adjust ACPI interrupt triggering for audio codecs
by Matt DeVillier (Code Review) 03 Apr '20

03 Apr '20

Matt DeVillier has submitted this change. ( https://review.coreboot.org/c/coreboot/+/24989 ) Change subject: mb/google/cyan: Adjust ACPI interrupt triggering for audio codecs ...................................................................... mb/google/cyan: Adjust ACPI interrupt triggering for audio codecs The jack detect GPIOs are initialized as dual edge-triggered GPIs, and Linux doesn't care if they are set to ActiveLow, ActiveHigh, or ActiveBoth -- a single interrupt is detected on jack insertion or removal. The Windows drivers on the other hand, will not function unless the codec and LPE ACPI interrupts entries are set as in the Intel Cherry Trail Tianocore platform reference code. So adjust the ACPI interrupt triggers to make Windows happy, since Linux doesn't care either way. Test: boot Linux (GalliumOS 3.1) and Windows 10 on google/edgar, observe functional audio output for both built-in speakers and headphones. Change-Id: Ic1dd8ece610d761791c060ece2d0aa51addf97ad Signed-off-by: Matt DeVillier <matt.devillier(a)gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/24989 Reviewed-by: Aaron Durbin <adurbin(a)chromium.org> Reviewed-by: Angel Pons <th3fanbus(a)gmail.com> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> --- M src/mainboard/google/cyan/acpi/codec_maxim.asl M src/mainboard/google/cyan/acpi/codec_realtek.asl 2 files changed, 5 insertions(+), 5 deletions(-) Approvals: build bot (Jenkins): Verified Aaron Durbin: Looks good to me, approved Angel Pons: Looks good to me, approved diff --git a/src/mainboard/google/cyan/acpi/codec_maxim.asl b/src/mainboard/google/cyan/acpi/codec_maxim.asl index 4f69daf..a33f80a 100644 --- a/src/mainboard/google/cyan/acpi/codec_maxim.asl +++ b/src/mainboard/google/cyan/acpi/codec_maxim.asl @@ -44,7 +44,7 @@ "\\_SB.PCI0.I2C2", /* ResourceSource: I2C bus controller name */ ) - GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullDefault,, + GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullDefault,, "\\_SB.GPSE") { BOARD_JACK_MAXIM_GPIO_INDEX } } ) Return (SBUF) @@ -87,7 +87,7 @@ "\\_SB.PCI0.I2C2", /* ResourceSource: I2C bus controller name */ ) - GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullDefault,, + GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullDefault,, "\\_SB.GPSW") { BOARD_JACK_TI_GPIO_INDEX } } ) @@ -107,7 +107,7 @@ Name (GBUF, ResourceTemplate () { /* Jack Detect (index 0) */ - GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullDefault,, + GpioInt (Edge, ActiveBoth, ExclusiveAndWake, PullDefault,, "\\_SB.GPSE") { BOARD_JACK_MAXIM_GPIO_INDEX } }) } diff --git a/src/mainboard/google/cyan/acpi/codec_realtek.asl b/src/mainboard/google/cyan/acpi/codec_realtek.asl index 365f799..34bf109 100644 --- a/src/mainboard/google/cyan/acpi/codec_realtek.asl +++ b/src/mainboard/google/cyan/acpi/codec_realtek.asl @@ -36,7 +36,7 @@ ) /* Jack Detect (index 0) */ - GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullDefault,, + GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullDefault,, "\\_SB.GPSW") { JACK_DETECT_GPIO_INDEX } } ) Return (SBUF) @@ -54,7 +54,7 @@ Name (GBUF, ResourceTemplate () { /* Jack Detect (index 0) */ - GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullDefault,, + GpioInt (Edge, ActiveBoth, ExclusiveAndWake, PullDefault,, "\\_SB.GPSW") { JACK_DETECT_GPIO_INDEX } }) } -- To view, visit https://review.coreboot.org/c/coreboot/+/24989 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ic1dd8ece610d761791c060ece2d0aa51addf97ad Gerrit-Change-Number: 24989 Gerrit-PatchSet: 6 Gerrit-Owner: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-Reviewer: Aaron Durbin <adurbin(a)chromium.org> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-MessageType: merged

1 0

Change in coreboot[master]: mb/google/cyan: Adjust CID for realtek audio codec
by Matt DeVillier (Code Review) 03 Apr '20

03 Apr '20

Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/40003 ) Change subject: mb/google/cyan: Adjust CID for realtek audio codec ...................................................................... mb/google/cyan: Adjust CID for realtek audio codec Adjust CID to allow for Windows driver to attach without breaking functionality under Linux. Test: build/boot google/edgar, verify working audio under both Windows 10 and Linux (GalliumOS 3.1) Change-Id: Idca5cc86ba1f5ef3978cfba291a0c06e56ef5958 Signed-off-by: Matt DeVillier <matt.devillier(a)gmail.com> --- M src/mainboard/google/cyan/acpi/codec_realtek.asl 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/03/40003/1 diff --git a/src/mainboard/google/cyan/acpi/codec_realtek.asl b/src/mainboard/google/cyan/acpi/codec_realtek.asl index 9ebef19..365f799 100644 --- a/src/mainboard/google/cyan/acpi/codec_realtek.asl +++ b/src/mainboard/google/cyan/acpi/codec_realtek.asl @@ -19,7 +19,7 @@ Device (RTEK) /* Audio Codec driver I2C */ { Name (_HID, AUDIO_CODEC_HID) - Name (_CID, AUDIO_CODEC_CID) + Name (_CID, Package() { AUDIO_CODEC_CID, "INTCCFFD" }) Name (_DDN, AUDIO_CODEC_DDN) Name (_UID, 1) -- To view, visit https://review.coreboot.org/c/coreboot/+/40003 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Idca5cc86ba1f5ef3978cfba291a0c06e56ef5958 Gerrit-Change-Number: 40003 Gerrit-PatchSet: 1 Gerrit-Owner: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-MessageType: newchange

3 8

Change in coreboot[master]: mb/google/cyan: Switch eMMC and SD from ACPI to PCI mode
by Matt DeVillier (Code Review) 03 Apr '20

03 Apr '20

Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/40002 ) Change subject: mb/google/cyan: Switch eMMC and SD from ACPI to PCI mode ...................................................................... mb/google/cyan: Switch eMMC and SD from ACPI to PCI mode Braswell boards don't work well with the eMMC and SD controller in ACPI in payloads other than depthcharge - SeaBIOS requires an onerous workaround, and Tianocore can't see the devices at all. To make the common use-case work better, switch from ACPI mode to PCI mode. Test: build/boot cyan variants with SeaBIOS and Tianocore payloads, verify eMMC and SD card visible and bootable. Change-Id: I71947603e22a37fe2c8ef4eaac8a3aa0d0ed1cec Signed-off-by: Matt DeVillier <matt.devillier(a)gmail.com> --- M src/mainboard/google/cyan/devicetree.cb 1 file changed, 5 insertions(+), 5 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/40002/1 diff --git a/src/mainboard/google/cyan/devicetree.cb b/src/mainboard/google/cyan/devicetree.cb index d5f7a3f..5df1a5a 100644 --- a/src/mainboard/google/cyan/devicetree.cb +++ b/src/mainboard/google/cyan/devicetree.cb @@ -19,7 +19,7 @@ # Set the parameters for SiliconInit ############################################################ - register "PcdSdcardMode" = "PCH_ACPI_MODE" + register "PcdSdcardMode" = "PCH_PCI_MODE" register "PcdEnableHsuart0" = "0" register "PcdEnableHsuart1" = "1" register "PcdEnableAzalia" = "1" @@ -36,7 +36,7 @@ register "PcdEnableI2C6" = "0" register "PunitPwrConfigDisable" = "0" # Enable SVID register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" + register "PcdEmmcMode" = "PCH_PCI_MODE" register "PcdUsb3ClkSsc" = "1" register "PcdDispClkSsc" = "1" register "PcdSataClkSsc" = "1" @@ -84,10 +84,10 @@ # LPE audio codec settings register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - # Enable devices in ACPI mode + # Enable LPSS and LPE devices in ACPI mode register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" + register "emmc_acpi_mode" = "0" + register "sd_acpi_mode" = "0" register "lpe_acpi_mode" = "1" # Disable SLP_X stretching after SUS power well fail. -- To view, visit https://review.coreboot.org/c/coreboot/+/40002 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I71947603e22a37fe2c8ef4eaac8a3aa0d0ed1cec Gerrit-Change-Number: 40002 Gerrit-PatchSet: 1 Gerrit-Owner: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-MessageType: newchange

3 9

Change in coreboot[master]: mb/google/cyan: convert to overridetree
by Matt DeVillier (Code Review) 03 Apr '20

03 Apr '20

Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39964 ) Change subject: mb/google/cyan: convert to overridetree ...................................................................... mb/google/cyan: convert to overridetree Simply cyan variants by converting to overridetree format. A few differences were ignored as there appears to be no reason behind them: - cyan had PCIe RP2 enabled, but nothing is attached to it - kefka had the SPI 1 device disabled - reks, relm, and ultima had HSUART 1 disabled Test: build/boot cyan and edgar variants, verify everything still works Change-Id: I9928cc59adcfda4661ddfdfa95f53a7820053b4a Signed-off-by: Matt DeVillier <matt.devillier(a)gmail.com> --- M src/mainboard/google/cyan/Kconfig R src/mainboard/google/cyan/devicetree.cb D src/mainboard/google/cyan/variants/banon/devicetree.cb A src/mainboard/google/cyan/variants/banon/overridetree.cb D src/mainboard/google/cyan/variants/celes/devicetree.cb A src/mainboard/google/cyan/variants/celes/overridetree.cb D src/mainboard/google/cyan/variants/cyan/devicetree.cb A src/mainboard/google/cyan/variants/cyan/overridetree.cb D src/mainboard/google/cyan/variants/edgar/devicetree.cb A src/mainboard/google/cyan/variants/edgar/overridetree.cb D src/mainboard/google/cyan/variants/kefka/devicetree.cb A src/mainboard/google/cyan/variants/kefka/overridetree.cb D src/mainboard/google/cyan/variants/reks/devicetree.cb A src/mainboard/google/cyan/variants/reks/overridetree.cb D src/mainboard/google/cyan/variants/relm/devicetree.cb A src/mainboard/google/cyan/variants/relm/overridetree.cb D src/mainboard/google/cyan/variants/setzer/devicetree.cb A src/mainboard/google/cyan/variants/setzer/overridetree.cb A src/mainboard/google/cyan/variants/terra/overridetree.cb D src/mainboard/google/cyan/variants/ultima/devicetree.cb A src/mainboard/google/cyan/variants/ultima/overridetree.cb D src/mainboard/google/cyan/variants/wizpig/devicetree.cb A src/mainboard/google/cyan/variants/wizpig/overridetree.cb 23 files changed, 226 insertions(+), 1,455 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/64/39964/1 diff --git a/src/mainboard/google/cyan/Kconfig b/src/mainboard/google/cyan/Kconfig index 4561054..92bafee 100644 --- a/src/mainboard/google/cyan/Kconfig +++ b/src/mainboard/google/cyan/Kconfig @@ -68,9 +68,9 @@ default "Ultima" if BOARD_GOOGLE_ULTIMA default "Wizpig" if BOARD_GOOGLE_WIZPIG -config DEVICETREE +config OVERRIDE_DEVICETREE string - default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb" + default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb" config CBFS_SIZE hex diff --git a/src/mainboard/google/cyan/variants/terra/devicetree.cb b/src/mainboard/google/cyan/devicetree.cb similarity index 74% rename from src/mainboard/google/cyan/variants/terra/devicetree.cb rename to src/mainboard/google/cyan/devicetree.cb index d7d0f1f..d5f7a3f 100644 --- a/src/mainboard/google/cyan/variants/terra/devicetree.cb +++ b/src/mainboard/google/cyan/devicetree.cb @@ -27,12 +27,12 @@ register "PcdEnableLpe" = "1" register "PcdEnableDma0" = "1" register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "0" - register "PcdEnableI2C1" = "1" + register "PcdEnableI2C0" = "0" # Touchscreen + register "PcdEnableI2C1" = "1" # PMIC (or Maxim Audio) register "PcdEnableI2C2" = "0" register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "1" - register "PcdEnableI2C5" = "1" + register "PcdEnableI2C4" = "1" # Realtek Audio + register "PcdEnableI2C5" = "1" # Touchpad register "PcdEnableI2C6" = "0" register "PunitPwrConfigDisable" = "0" # Enable SVID register "ChvSvidConfig" = "SVID_PMIC_CONFIG" @@ -67,13 +67,14 @@ register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" register "PcdSataInterfaceSpeed" = "3" register "PcdPchSsicEnable" = "1" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM + register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM register "PMIC_I2CBus" = "1" register "ISPEnable" = "0" # Disable IUNIT register "ISPPciDevConfig" = "3" register "PcdSdDetectChk" = "0" # Disable SD card detect + register "I2C0Frequency" = "1" - register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz + register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz register "I2C2Frequency" = "1" register "I2C3Frequency" = "1" register "I2C4Frequency" = "1" @@ -100,37 +101,37 @@ end device domain 0 on # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display + device pci 00.0 on end # 8086 2280 - SoC transaction router + device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port + device pci 0b.0 on end # 8086 22dc - Signal Processing Controller + device pci 10.0 on end # 8086 2294 - MMC Port device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port + device pci 12.0 off end # 8086 0F16 - SD Port device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio + device pci 14.0 on end # 8086 22b5 - USB XHCI + device pci 15.0 on end # 8086 22a8 - LP Engine Audio device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 off end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 + device pci 18.0 on end # 8086 22c0 - SIO - DMA + device pci 18.1 off end # 8086 22c1 - I2C Port 1: Touchscreen + device pci 18.2 on end # 8086 22c2 - I2C Port 2: PMIC device pci 18.3 off end # 8086 22c3 - I2C Port 3 device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 on end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 + device pci 18.5 on end # 8086 22c5 - I2C Port 5: Realtek Audio + device pci 18.6 on end # 8086 22c6 - I2C Port 6: Touchpad device pci 18.7 off end # 8086 22c7 - I2C Port 7 device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 0F04 - HD Audio - device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1 - device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA + device pci 1b.0 on end # 8086 2284 - HD Audio + device pci 1c.0 on end # 8086 22c8 - PCIe Root Port 1 + device pci 1c.1 off end # 8086 22ca - PCIe Root Port 2 + device pci 1c.2 on end # 8086 22cc - PCIe Root Port 3: WiFi + device pci 1c.3 off end # 8086 22ce - PCIe Root Port 4 + device pci 1e.0 on end # 8086 2286 - SIO - DMA device pci 1e.1 off end # 8086 0F08 - PWM 1 device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 on end # 8086 228a - HSUART 1 + device pci 1e.3 on end # 8086 228a - HSUART 1 device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 on end # 8086 228e - SPI 1 + device pci 1e.5 on end # 8086 228e - SPI 1 device pci 1e.6 off end # 8086 2290 - SPI 2 device pci 1e.7 off end # 8086 22ac - SPI 3 device pci 1f.0 on # 8086 229c - LPC bridge diff --git a/src/mainboard/google/cyan/variants/banon/devicetree.cb b/src/mainboard/google/cyan/variants/banon/devicetree.cb deleted file mode 100644 index 60076c2..0000000 --- a/src/mainboard/google/cyan/variants/banon/devicetree.cb +++ /dev/null @@ -1,146 +0,0 @@ -chip soc/intel/braswell - - ############################################################ - # Set the parameters for MemoryInit - ############################################################ - - register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB - - register "PcdMrcInitMmioSize" = "0x0800" - register "PcdMrcInitSpdAddr1" = "0xa0" - register "PcdMrcInitSpdAddr2" = "0xa2" - register "PcdIgdDvmt50PreAlloc" = "1" - register "PcdApertureSize" = "2" - register "PcdGttSize" = "1" - register "PcdDvfsEnable" = "1" - register "PcdCaMirrorEn" = "1" - - ############################################################ - # Set the parameters for SiliconInit - ############################################################ - - register "PcdSdcardMode" = "PCH_ACPI_MODE" - register "PcdEnableHsuart0" = "0" - register "PcdEnableHsuart1" = "1" - register "PcdEnableAzalia" = "1" - register "PcdEnableXhci" = "1" - register "PcdEnableLpe" = "1" - register "PcdEnableDma0" = "1" - register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "0" - register "PcdEnableI2C1" = "1" - register "PcdEnableI2C2" = "0" - register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "1" - register "PcdEnableI2C5" = "1" - register "PcdEnableI2C6" = "0" - register "PunitPwrConfigDisable" = "0" # Enable SVID - register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" - register "PcdUsb3ClkSsc" = "1" - register "PcdDispClkSsc" = "1" - register "PcdSataClkSsc" = "1" - register "PcdEnableSata" = "0" # Disable SATA - register "Usb2Port0PerPortPeTxiSet" = "7" - register "Usb2Port0PerPortTxiSet" = "6" - register "Usb2Port0IUsbTxEmphasisEn" = "3" - register "Usb2Port0PerPortTxPeHalf" = "1" - register "Usb2Port1PerPortPeTxiSet" = "7" - register "Usb2Port1PerPortTxiSet" = "6" - register "Usb2Port1IUsbTxEmphasisEn" = "3" - register "Usb2Port1PerPortTxPeHalf" = "1" - register "Usb2Port2PerPortPeTxiSet" = "7" - register "Usb2Port2PerPortTxiSet" = "6" - register "Usb2Port2IUsbTxEmphasisEn" = "3" - register "Usb2Port2PerPortTxPeHalf" = "1" - register "Usb2Port3PerPortPeTxiSet" = "7" - register "Usb2Port3PerPortTxiSet" = "6" - register "Usb2Port3IUsbTxEmphasisEn" = "3" - register "Usb2Port3PerPortTxPeHalf" = "1" - register "Usb2Port4PerPortPeTxiSet" = "7" - register "Usb2Port4PerPortTxiSet" = "6" - register "Usb2Port4IUsbTxEmphasisEn" = "3" - register "Usb2Port4PerPortTxPeHalf" = "1" - register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" - register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" - register "PcdSataInterfaceSpeed" = "3" - register "PcdPchSsicEnable" = "1" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM - register "PMIC_I2CBus" = "1" - register "ISPEnable" = "0" # Disable IUNIT - register "ISPPciDevConfig" = "3" - register "PcdSdDetectChk" = "0" # Disable SD card detect - register "I2C0Frequency" = "1" - register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz - register "I2C2Frequency" = "1" - register "I2C3Frequency" = "1" - register "I2C4Frequency" = "1" - register "I2C5Frequency" = "1" - register "I2C6Frequency" = "1" - - # LPE audio codec settings - register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - - # Enable devices in ACPI mode - register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" - register "lpe_acpi_mode" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display - device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port - device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port - device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio - device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 off end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 - device pci 18.3 off end # 8086 22c3 - I2C Port 3 - device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 on end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 - device pci 18.7 off end # 8086 22c7 - I2C Port 7 - device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 0F04 - HD Audio - device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1 - device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA - device pci 1e.1 off end # 8086 0F08 - PWM 1 - device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 on end # 8086 228a - HSUART 1 - device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 on end # 8086 228e - SPI 1 - device pci 1e.6 off end # 8086 2290 - SPI 2 - device pci 1e.7 off end # 8086 22ac - SPI 3 - device pci 1f.0 on # 8086 229c - LPC bridge - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Bridge - device pci 1f.3 off end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/google/cyan/variants/banon/overridetree.cb b/src/mainboard/google/cyan/variants/banon/overridetree.cb new file mode 100644 index 0000000..a373247 --- /dev/null +++ b/src/mainboard/google/cyan/variants/banon/overridetree.cb @@ -0,0 +1,27 @@ +chip soc/intel/braswell + + register "Usb2Port0PerPortPeTxiSet" = "7" + register "Usb2Port0PerPortTxiSet" = "6" + register "Usb2Port0IUsbTxEmphasisEn" = "3" + register "Usb2Port0PerPortTxPeHalf" = "1" + register "Usb2Port1PerPortPeTxiSet" = "7" + register "Usb2Port1PerPortTxiSet" = "6" + register "Usb2Port1IUsbTxEmphasisEn" = "3" + register "Usb2Port1PerPortTxPeHalf" = "1" + register "Usb2Port2PerPortPeTxiSet" = "7" + register "Usb2Port2PerPortTxiSet" = "6" + register "Usb2Port2IUsbTxEmphasisEn" = "3" + register "Usb2Port2PerPortTxPeHalf" = "1" + register "Usb2Port3PerPortPeTxiSet" = "7" + register "Usb2Port3PerPortTxiSet" = "6" + register "Usb2Port3IUsbTxEmphasisEn" = "3" + register "Usb2Port3PerPortTxPeHalf" = "1" + register "Usb2Port4PerPortPeTxiSet" = "7" + register "Usb2Port4PerPortTxiSet" = "6" + register "Usb2Port4IUsbTxEmphasisEn" = "3" + register "Usb2Port4PerPortTxPeHalf" = "1" + + device domain 0 on + device pci 12.0 on end # 8086 0F16 - SD Port + end +end diff --git a/src/mainboard/google/cyan/variants/celes/devicetree.cb b/src/mainboard/google/cyan/variants/celes/devicetree.cb deleted file mode 100644 index a1ab510..0000000 --- a/src/mainboard/google/cyan/variants/celes/devicetree.cb +++ /dev/null @@ -1,140 +0,0 @@ -chip soc/intel/braswell - - ############################################################ - # Set the parameters for MemoryInit - ############################################################ - - register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB - - register "PcdMrcInitMmioSize" = "0x0800" - register "PcdMrcInitSpdAddr1" = "0xa0" - register "PcdMrcInitSpdAddr2" = "0xa2" - register "PcdIgdDvmt50PreAlloc" = "1" - register "PcdApertureSize" = "2" - register "PcdGttSize" = "1" - register "PcdDvfsEnable" = "1" - register "PcdCaMirrorEn" = "1" - - ############################################################ - # Set the parameters for SiliconInit - ############################################################ - - register "PcdSdcardMode" = "PCH_ACPI_MODE" - register "PcdEnableHsuart0" = "0" - register "PcdEnableHsuart1" = "1" - register "PcdEnableAzalia" = "1" - register "PcdEnableXhci" = "1" - register "PcdEnableLpe" = "1" - register "PcdEnableDma0" = "1" - register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "0" - register "PcdEnableI2C1" = "1" - register "PcdEnableI2C2" = "0" - register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "1" - register "PcdEnableI2C5" = "1" - register "PcdEnableI2C6" = "0" - register "PunitPwrConfigDisable" = "0" # Enable SVID - register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" - register "PcdUsb3ClkSsc" = "1" - register "PcdDispClkSsc" = "1" - register "PcdSataClkSsc" = "1" - register "PcdEnableSata" = "0" # Disable SATA - register "Usb2Port0PerPortPeTxiSet" = "7" - register "Usb2Port0PerPortTxiSet" = "5" - register "Usb2Port0IUsbTxEmphasisEn" = "2" - register "Usb2Port0PerPortTxPeHalf" = "1" - register "Usb2Port1PerPortPeTxiSet" = "7" - register "Usb2Port1PerPortTxiSet" = "3" - register "Usb2Port1IUsbTxEmphasisEn" = "2" - register "Usb2Port1PerPortTxPeHalf" = "1" - register "Usb2Port2PerPortPeTxiSet" = "7" - register "Usb2Port2PerPortTxiSet" = "3" - register "Usb2Port2IUsbTxEmphasisEn" = "2" - register "Usb2Port2PerPortTxPeHalf" = "1" - register "Usb2Port3PerPortPeTxiSet" = "7" - register "Usb2Port3PerPortTxiSet" = "3" - register "Usb2Port3IUsbTxEmphasisEn" = "2" - register "Usb2Port3PerPortTxPeHalf" = "1" - register "Usb2Port4PerPortPeTxiSet" = "7" - register "Usb2Port4PerPortTxiSet" = "3" - register "Usb2Port4IUsbTxEmphasisEn" = "2" - register "Usb2Port4PerPortTxPeHalf" = "1" - register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" - register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" - register "PcdSataInterfaceSpeed" = "3" - register "PcdPchSsicEnable" = "0" - register "PcdPchUsbHsicPort" = "0" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM - register "PMIC_I2CBus" = "1" - register "ISPEnable" = "0" # Disable IUNIT - register "ISPPciDevConfig" = "3" - register "PcdSdDetectChk" = "0" # Disable SD card detect - - # LPE audio codec settings - register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - - # Enable devices in ACPI mode - register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" - register "lpe_acpi_mode" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display - device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port - device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port - device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio - device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 off end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 - device pci 18.3 off end # 8086 22c3 - I2C Port 3 - device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 on end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 - device pci 18.7 off end # 8086 22c7 - I2C Port 7 - device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 0F04 - HD Audio - device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1 - device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA - device pci 1e.1 off end # 8086 0F08 - PWM 1 - device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 on end # 8086 228a - HSUART 1 - device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 on end # 8086 228e - SPI 1 - device pci 1e.6 off end # 8086 2290 - SPI 2 - device pci 1e.7 off end # 8086 22ac - SPI 3 - device pci 1f.0 on # 8086 229c - LPC bridge - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Bridge - device pci 1f.3 off end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/google/cyan/variants/celes/overridetree.cb b/src/mainboard/google/cyan/variants/celes/overridetree.cb new file mode 100644 index 0000000..077dc64 --- /dev/null +++ b/src/mainboard/google/cyan/variants/celes/overridetree.cb @@ -0,0 +1,9 @@ +chip soc/intel/braswell + + register "PcdPchSsicEnable" = "0" + register "PcdPchUsbHsicPort" = "0" + + device domain 0 on + device pci 12.0 on end # 8086 0F16 - SD Port + end +end diff --git a/src/mainboard/google/cyan/variants/cyan/devicetree.cb b/src/mainboard/google/cyan/variants/cyan/devicetree.cb deleted file mode 100644 index dd9b05e..0000000 --- a/src/mainboard/google/cyan/variants/cyan/devicetree.cb +++ /dev/null @@ -1,139 +0,0 @@ -chip soc/intel/braswell - - ############################################################ - # Set the parameters for MemoryInit - ############################################################ - - register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB - - register "PcdMrcInitMmioSize" = "0x0800" - register "PcdMrcInitSpdAddr1" = "0xa0" - register "PcdMrcInitSpdAddr2" = "0xa2" - register "PcdIgdDvmt50PreAlloc" = "1" - register "PcdApertureSize" = "2" - register "PcdGttSize" = "1" - register "PcdDvfsEnable" = "1" - register "PcdCaMirrorEn" = "0" - - ############################################################ - # Set the parameters for SiliconInit - ############################################################ - - register "PcdSdcardMode" = "PCH_ACPI_MODE" - register "PcdEnableHsuart0" = "0" - register "PcdEnableHsuart1" = "1" - register "PcdEnableAzalia" = "1" - register "PcdEnableXhci" = "1" - register "PcdEnableLpe" = "1" - register "PcdEnableDma0" = "1" - register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "1" - register "PcdEnableI2C1" = "1" - register "PcdEnableI2C2" = "0" - register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "0" - register "PcdEnableI2C5" = "1" - register "PcdEnableI2C6" = "0" - register "PunitPwrConfigDisable" = "0" # Enable SVID - register "ChvSvidConfig" = "SVID_CONFIG1" - register "PcdEmmcMode" = "PCH_ACPI_MODE" - register "PcdUsb3ClkSsc" = "1" - register "PcdDispClkSsc" = "1" - register "PcdSataClkSsc" = "1" - register "PcdEnableSata" = "0" # Disable SATA - register "Usb2Port0PerPortPeTxiSet" = "7" - register "Usb2Port0PerPortTxiSet" = "5" - register "Usb2Port0IUsbTxEmphasisEn" = "2" - register "Usb2Port0PerPortTxPeHalf" = "1" - register "Usb2Port1PerPortPeTxiSet" = "7" - register "Usb2Port1PerPortTxiSet" = "3" - register "Usb2Port1IUsbTxEmphasisEn" = "2" - register "Usb2Port1PerPortTxPeHalf" = "1" - register "Usb2Port2PerPortPeTxiSet" = "7" - register "Usb2Port2PerPortTxiSet" = "3" - register "Usb2Port2IUsbTxEmphasisEn" = "2" - register "Usb2Port2PerPortTxPeHalf" = "1" - register "Usb2Port3PerPortPeTxiSet" = "7" - register "Usb2Port3PerPortTxiSet" = "3" - register "Usb2Port3IUsbTxEmphasisEn" = "2" - register "Usb2Port3PerPortTxPeHalf" = "1" - register "Usb2Port4PerPortPeTxiSet" = "7" - register "Usb2Port4PerPortTxiSet" = "3" - register "Usb2Port4IUsbTxEmphasisEn" = "2" - register "Usb2Port4PerPortTxPeHalf" = "1" - register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" - register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" - register "PcdSataInterfaceSpeed" = "3" - register "PcdPchSsicEnable" = "1" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM - register "PMIC_I2CBus" = "0" - register "ISPEnable" = "0" # Disable IUNIT - register "ISPPciDevConfig" = "3" - register "PcdSdDetectChk" = "0" # Disable SD card detect - - # LPE audio codec settings - register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - - # Enable devices in ACPI mode - register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" - register "lpe_acpi_mode" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display - device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port - device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port - device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio - device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 on end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 - device pci 18.3 off end # 8086 22c3 - I2C Port 3 - device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 off end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 - device pci 18.7 off end # 8086 22c7 - I2C Port 7 - device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 2284 - HD Audio - device pci 1c.0 on end # 8086 22c8 - PCIe Root Port 1 - device pci 1c.1 on end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 22cc - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA - device pci 1e.1 off end # 8086 0F08 - PWM 1 - device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 on end # 8086 228a - HSUART 1 - device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 on end # 8086 228e - SPI 1 - device pci 1e.6 off end # 8086 2290 - SPI 2 - device pci 1e.7 off end # 8086 22ac - SPI 3 - device pci 1f.0 on # 8086 229c - LPC bridge - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Bridge - device pci 1f.3 off end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/google/cyan/variants/cyan/overridetree.cb b/src/mainboard/google/cyan/variants/cyan/overridetree.cb new file mode 100644 index 0000000..1cef5c70 --- /dev/null +++ b/src/mainboard/google/cyan/variants/cyan/overridetree.cb @@ -0,0 +1,19 @@ +chip soc/intel/braswell + + register "PcdCaMirrorEn" = "0" + + register "PcdEnableI2C0" = "1" # Touchscreen + register "PcdEnableI2C4" = "0" # No Realtek Audio + + register "ChvSvidConfig" = "SVID_CONFIG1" + + register "PMIC_I2CBus" = "0" + + register "I2C1Frequency" = "1" + + device domain 0 on + device pci 12.0 on end # 8086 0F16 - SD Port + device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen + device pci 18.5 off end # 8086 22c5 - I2C Port 5: Realtek Audio + end +end diff --git a/src/mainboard/google/cyan/variants/edgar/devicetree.cb b/src/mainboard/google/cyan/variants/edgar/devicetree.cb deleted file mode 100644 index 0ba221e..0000000 --- a/src/mainboard/google/cyan/variants/edgar/devicetree.cb +++ /dev/null @@ -1,140 +0,0 @@ -chip soc/intel/braswell - - ############################################################ - # Set the parameters for MemoryInit - ############################################################ - - register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB - - register "PcdMrcInitMmioSize" = "0x0800" - register "PcdMrcInitSpdAddr1" = "0xa0" - register "PcdMrcInitSpdAddr2" = "0xa2" - register "PcdIgdDvmt50PreAlloc" = "1" - register "PcdApertureSize" = "2" - register "PcdGttSize" = "1" - register "PcdDvfsEnable" = "1" - register "PcdCaMirrorEn" = "1" - - ############################################################ - # Set the parameters for SiliconInit - ############################################################ - - register "PcdSdcardMode" = "PCH_DISABLED" - register "PcdEnableHsuart0" = "0" - register "PcdEnableHsuart1" = "1" - register "PcdEnableAzalia" = "1" - register "PcdEnableXhci" = "1" - register "PcdEnableLpe" = "1" - register "PcdEnableDma0" = "1" - register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "0" - register "PcdEnableI2C1" = "0" - register "PcdEnableI2C2" = "0" - register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "1" - register "PcdEnableI2C5" = "1" - register "PcdEnableI2C6" = "0" - register "PunitPwrConfigDisable" = "0" # Enable SVID - register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" - register "PcdUsb3ClkSsc" = "1" - register "PcdDispClkSsc" = "1" - register "PcdSataClkSsc" = "1" - register "PcdEnableSata" = "0" # Disable SATA - register "Usb2Port0PerPortPeTxiSet" = "7" - register "Usb2Port0PerPortTxiSet" = "5" - register "Usb2Port0IUsbTxEmphasisEn" = "2" - register "Usb2Port0PerPortTxPeHalf" = "1" - register "Usb2Port1PerPortPeTxiSet" = "7" - register "Usb2Port1PerPortTxiSet" = "3" - register "Usb2Port1IUsbTxEmphasisEn" = "2" - register "Usb2Port1PerPortTxPeHalf" = "1" - register "Usb2Port2PerPortPeTxiSet" = "7" - register "Usb2Port2PerPortTxiSet" = "3" - register "Usb2Port2IUsbTxEmphasisEn" = "2" - register "Usb2Port2PerPortTxPeHalf" = "1" - register "Usb2Port3PerPortPeTxiSet" = "7" - register "Usb2Port3PerPortTxiSet" = "6" - register "Usb2Port3IUsbTxEmphasisEn" = "3" - register "Usb2Port3PerPortTxPeHalf" = "1" - register "Usb2Port4PerPortPeTxiSet" = "7" - register "Usb2Port4PerPortTxiSet" = "0" - register "Usb2Port4IUsbTxEmphasisEn" = "2" - register "Usb2Port4PerPortTxPeHalf" = "1" - register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" - register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" - register "PcdSataInterfaceSpeed" = "3" - register "PcdPchSsicEnable" = "0" - register "PcdPchUsbHsicPort" = "0" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM - register "PMIC_I2CBus" = "1" - register "ISPEnable" = "0" # Disable IUNIT - register "ISPPciDevConfig" = "3" - register "PcdSdDetectChk" = "0" # Disable SD card detect - - # LPE audio codec settings - register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - - # Enable devices in ACPI mode - register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" - register "lpe_acpi_mode" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display - device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port - device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 off end # 8086 0F16 - SD Port - device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio - device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 off end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 - device pci 18.3 off end # 8086 22c3 - I2C Port 3 - device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 on end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 - device pci 18.7 off end # 8086 22c7 - I2C Port 7 - device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 0F04 - HD Audio - device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1 - device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA - device pci 1e.1 off end # 8086 0F08 - PWM 1 - device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 on end # 8086 228a - HSUART 1 - device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 on end # 8086 228e - SPI 1 - device pci 1e.6 off end # 8086 2290 - SPI 2 - device pci 1e.7 off end # 8086 22ac - SPI 3 - device pci 1f.0 on # 8086 229c - LPC bridge - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Bridge - device pci 1f.3 off end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/google/cyan/variants/edgar/overridetree.cb b/src/mainboard/google/cyan/variants/edgar/overridetree.cb new file mode 100644 index 0000000..48b1013 --- /dev/null +++ b/src/mainboard/google/cyan/variants/edgar/overridetree.cb @@ -0,0 +1,32 @@ +chip soc/intel/braswell + + register "PcdSdcardMode" = "PCH_DISABLED" + + register "Usb2Port0PerPortPeTxiSet" = "7" + register "Usb2Port0PerPortTxiSet" = "5" + register "Usb2Port0IUsbTxEmphasisEn" = "2" + register "Usb2Port0PerPortTxPeHalf" = "1" + register "Usb2Port1PerPortPeTxiSet" = "7" + register "Usb2Port1PerPortTxiSet" = "3" + register "Usb2Port1IUsbTxEmphasisEn" = "2" + register "Usb2Port1PerPortTxPeHalf" = "1" + register "Usb2Port2PerPortPeTxiSet" = "7" + register "Usb2Port2PerPortTxiSet" = "3" + register "Usb2Port2IUsbTxEmphasisEn" = "2" + register "Usb2Port2PerPortTxPeHalf" = "1" + register "Usb2Port3PerPortPeTxiSet" = "7" + register "Usb2Port3PerPortTxiSet" = "6" + register "Usb2Port3IUsbTxEmphasisEn" = "3" + register "Usb2Port3PerPortTxPeHalf" = "1" + register "Usb2Port4PerPortPeTxiSet" = "7" + register "Usb2Port4PerPortTxiSet" = "0" + register "Usb2Port4IUsbTxEmphasisEn" = "2" + register "Usb2Port4PerPortTxPeHalf" = "1" + + register "PcdPchSsicEnable" = "0" + register "PcdPchUsbHsicPort" = "0" + + device domain 0 on + device pci 12.0 off end # 8086 0F16 - SD Port + end +end diff --git a/src/mainboard/google/cyan/variants/kefka/devicetree.cb b/src/mainboard/google/cyan/variants/kefka/devicetree.cb deleted file mode 100644 index 807dbcb..0000000 --- a/src/mainboard/google/cyan/variants/kefka/devicetree.cb +++ /dev/null @@ -1,146 +0,0 @@ -chip soc/intel/braswell - - ############################################################ - # Set the parameters for MemoryInit - ############################################################ - - register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB - - register "PcdMrcInitMmioSize" = "0x0800" - register "PcdMrcInitSpdAddr1" = "0xa0" - register "PcdMrcInitSpdAddr2" = "0xa2" - register "PcdIgdDvmt50PreAlloc" = "1" - register "PcdApertureSize" = "2" - register "PcdGttSize" = "1" - register "PcdDvfsEnable" = "1" - register "PcdCaMirrorEn" = "1" - - ############################################################ - # Set the parameters for SiliconInit - ############################################################ - - register "PcdSdcardMode" = "PCH_ACPI_MODE" - register "PcdEnableHsuart0" = "0" - register "PcdEnableHsuart1" = "1" - register "PcdEnableAzalia" = "1" - register "PcdEnableXhci" = "1" - register "PcdEnableLpe" = "1" - register "PcdEnableDma0" = "1" - register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "1" - register "PcdEnableI2C1" = "1" - register "PcdEnableI2C2" = "0" - register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "1" - register "PcdEnableI2C5" = "1" - register "PcdEnableI2C6" = "0" - register "PunitPwrConfigDisable" = "0" # Enable SVID - register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" - register "PcdUsb3ClkSsc" = "1" - register "PcdDispClkSsc" = "1" - register "PcdSataClkSsc" = "1" - register "PcdEnableSata" = "0" # Disable SATA - register "Usb2Port0PerPortPeTxiSet" = "7" - register "Usb2Port0PerPortTxiSet" = "5" - register "Usb2Port0IUsbTxEmphasisEn" = "2" - register "Usb2Port0PerPortTxPeHalf" = "1" - register "Usb2Port1PerPortPeTxiSet" = "7" - register "Usb2Port1PerPortTxiSet" = "3" - register "Usb2Port1IUsbTxEmphasisEn" = "2" - register "Usb2Port1PerPortTxPeHalf" = "1" - register "Usb2Port2PerPortPeTxiSet" = "7" - register "Usb2Port2PerPortTxiSet" = "3" - register "Usb2Port2IUsbTxEmphasisEn" = "2" - register "Usb2Port2PerPortTxPeHalf" = "1" - register "Usb2Port3PerPortPeTxiSet" = "7" - register "Usb2Port3PerPortTxiSet" = "3" - register "Usb2Port3IUsbTxEmphasisEn" = "2" - register "Usb2Port3PerPortTxPeHalf" = "1" - register "Usb2Port4PerPortPeTxiSet" = "7" - register "Usb2Port4PerPortTxiSet" = "3" - register "Usb2Port4IUsbTxEmphasisEn" = "2" - register "Usb2Port4PerPortTxPeHalf" = "1" - register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" - register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" - register "PcdSataInterfaceSpeed" = "3" - register "PcdPchSsicEnable" = "1" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM - register "PMIC_I2CBus" = "1" - register "ISPEnable" = "0" # Disable IUNIT - register "ISPPciDevConfig" = "3" - register "PcdSdDetectChk" = "0" # Disable SD card detect - register "I2C0Frequency" = "1" - register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz - register "I2C2Frequency" = "1" - register "I2C3Frequency" = "1" - register "I2C4Frequency" = "1" - register "I2C5Frequency" = "1" - register "I2C6Frequency" = "1" - - # LPE audio codec settings - register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - - # Enable devices in ACPI mode - register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" - register "lpe_acpi_mode" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display - device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port - device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port - device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio - device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 on end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 - device pci 18.3 off end # 8086 22c3 - I2C Port 3 - device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 on end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 - device pci 18.7 off end # 8086 22c7 - I2C Port 7 - device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 0F04 - HD Audio - device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1 - device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA - device pci 1e.1 off end # 8086 0F08 - PWM 1 - device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 on end # 8086 228a - HSUART 1 - device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 off end # 8086 228e - SPI 1 - device pci 1e.6 off end # 8086 2290 - SPI 2 - device pci 1e.7 off end # 8086 22ac - SPI 3 - device pci 1f.0 on # 8086 229c - LPC bridge - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Bridge - device pci 1f.3 off end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/google/cyan/variants/kefka/overridetree.cb b/src/mainboard/google/cyan/variants/kefka/overridetree.cb new file mode 100644 index 0000000..ea1942d --- /dev/null +++ b/src/mainboard/google/cyan/variants/kefka/overridetree.cb @@ -0,0 +1,9 @@ +chip soc/intel/braswell + + register "PcdEnableI2C0" = "1" # Touchscreen + + device domain 0 on + device pci 12.0 on end # 8086 0F16 - SD Port + device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen + end +end diff --git a/src/mainboard/google/cyan/variants/reks/devicetree.cb b/src/mainboard/google/cyan/variants/reks/devicetree.cb deleted file mode 100644 index 302f2da..0000000 --- a/src/mainboard/google/cyan/variants/reks/devicetree.cb +++ /dev/null @@ -1,137 +0,0 @@ -chip soc/intel/braswell - - ############################################################ - # Set the parameters for MemoryInit - ############################################################ - - register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB - - register "PcdMrcInitMmioSize" = "0x0800" - register "PcdMrcInitSpdAddr1" = "0xa0" - register "PcdMrcInitSpdAddr2" = "0xa2" - register "PcdIgdDvmt50PreAlloc" = "1" - register "PcdApertureSize" = "2" - register "PcdGttSize" = "1" - register "PcdDvfsEnable" = "1" - register "PcdCaMirrorEn" = "1" - - ############################################################ - # Set the parameters for SiliconInit - ############################################################ - register "PcdSdcardMode" = "PCH_ACPI_MODE" - register "PcdEnableHsuart0" = "0" - register "PcdEnableHsuart1" = "1" - register "PcdEnableAzalia" = "1" - register "PcdEnableXhci" = "1" - register "PcdEnableLpe" = "1" - register "PcdEnableDma0" = "1" - register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "1" - register "PcdEnableI2C1" = "1" - register "PcdEnableI2C2" = "0" - register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "1" - register "PcdEnableI2C5" = "1" - register "PcdEnableI2C6" = "0" - register "PunitPwrConfigDisable" = "0" # Enable SVID - register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" - register "PcdUsb3ClkSsc" = "1" - register "PcdDispClkSsc" = "1" - register "PcdSataClkSsc" = "1" - register "PcdEnableSata" = "0" # Disable SATA - register "Usb2Port0PerPortPeTxiSet" = "7" - register "Usb2Port0PerPortTxiSet" = "5" - register "Usb2Port0IUsbTxEmphasisEn" = "2" - register "Usb2Port0PerPortTxPeHalf" = "1" - register "Usb2Port1PerPortPeTxiSet" = "7" - register "Usb2Port1PerPortTxiSet" = "7" - register "Usb2Port1IUsbTxEmphasisEn" = "2" - register "Usb2Port1PerPortTxPeHalf" = "1" - register "Usb2Port2PerPortPeTxiSet" = "7" - register "Usb2Port2PerPortTxiSet" = "3" - register "Usb2Port2IUsbTxEmphasisEn" = "2" - register "Usb2Port2PerPortTxPeHalf" = "1" - register "Usb2Port3PerPortPeTxiSet" = "7" - register "Usb2Port3PerPortTxiSet" = "3" - register "Usb2Port3IUsbTxEmphasisEn" = "2" - register "Usb2Port3PerPortTxPeHalf" = "1" - register "Usb2Port4PerPortPeTxiSet" = "7" - register "Usb2Port4PerPortTxiSet" = "3" - register "Usb2Port4IUsbTxEmphasisEn" = "2" - register "Usb2Port4PerPortTxPeHalf" = "1" - register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" - register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" - register "PcdSataInterfaceSpeed" = "3" - register "PcdPchSsicEnable" = "1" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM - register "PMIC_I2CBus" = "1" - register "ISPEnable" = "0" # Disable IUNIT - register "ISPPciDevConfig" = "3" - register "PcdSdDetectChk" = "0" # Disable SD card detect - # LPE audio codec settings - register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - - # Enable devices in ACPI mode - register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" - register "lpe_acpi_mode" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display - device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port - device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port - device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio - device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 on end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 - device pci 18.3 off end # 8086 22c3 - I2C Port 3 - device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 on end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 - device pci 18.7 off end # 8086 22c7 - I2C Port 7 - device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 0F04 - HD Audio - device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1 - device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA - device pci 1e.1 off end # 8086 0F08 - PWM 1 - device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 off end # 8086 228a - HSUART 1 - device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 on end # 8086 228e - SPI 1 - device pci 1e.6 off end # 8086 2290 - SPI 2 - device pci 1e.7 off end # 8086 22ac - SPI 3 - device pci 1f.0 on # 8086 229c - LPC bridge - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Bridge - device pci 1f.3 off end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/google/cyan/variants/reks/overridetree.cb b/src/mainboard/google/cyan/variants/reks/overridetree.cb new file mode 100644 index 0000000..b8e81ac --- /dev/null +++ b/src/mainboard/google/cyan/variants/reks/overridetree.cb @@ -0,0 +1,30 @@ +chip soc/intel/braswell + + register "PcdEnableI2C0" = "1" # Touchscreen + + register "Usb2Port0PerPortPeTxiSet" = "7" + register "Usb2Port0PerPortTxiSet" = "5" + register "Usb2Port0IUsbTxEmphasisEn" = "2" + register "Usb2Port0PerPortTxPeHalf" = "1" + register "Usb2Port1PerPortPeTxiSet" = "7" + register "Usb2Port1PerPortTxiSet" = "7" + register "Usb2Port1IUsbTxEmphasisEn" = "2" + register "Usb2Port1PerPortTxPeHalf" = "1" + register "Usb2Port2PerPortPeTxiSet" = "7" + register "Usb2Port2PerPortTxiSet" = "3" + register "Usb2Port2IUsbTxEmphasisEn" = "2" + register "Usb2Port2PerPortTxPeHalf" = "1" + register "Usb2Port3PerPortPeTxiSet" = "7" + register "Usb2Port3PerPortTxiSet" = "3" + register "Usb2Port3IUsbTxEmphasisEn" = "2" + register "Usb2Port3PerPortTxPeHalf" = "1" + register "Usb2Port4PerPortPeTxiSet" = "7" + register "Usb2Port4PerPortTxiSet" = "3" + register "Usb2Port4IUsbTxEmphasisEn" = "2" + register "Usb2Port4PerPortTxPeHalf" = "1" + + device domain 0 on + device pci 12.0 on end # 8086 0F16 - SD Port + device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen + end +end diff --git a/src/mainboard/google/cyan/variants/relm/devicetree.cb b/src/mainboard/google/cyan/variants/relm/devicetree.cb deleted file mode 100644 index e1bbb0a..0000000 --- a/src/mainboard/google/cyan/variants/relm/devicetree.cb +++ /dev/null @@ -1,146 +0,0 @@ -chip soc/intel/braswell - - ############################################################ - # Set the parameters for MemoryInit - ############################################################ - - register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB - - register "PcdMrcInitMmioSize" = "0x0800" - register "PcdMrcInitSpdAddr1" = "0xa0" - register "PcdMrcInitSpdAddr2" = "0xa2" - register "PcdIgdDvmt50PreAlloc" = "1" - register "PcdApertureSize" = "2" - register "PcdGttSize" = "1" - register "PcdDvfsEnable" = "1" - register "PcdCaMirrorEn" = "1" - - ############################################################ - # Set the parameters for SiliconInit - ############################################################ - - register "PcdSdcardMode" = "PCH_ACPI_MODE" - register "PcdEnableHsuart0" = "0" - register "PcdEnableHsuart1" = "1" - register "PcdEnableAzalia" = "1" - register "PcdEnableXhci" = "1" - register "PcdEnableLpe" = "1" - register "PcdEnableDma0" = "1" - register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "1" - register "PcdEnableI2C1" = "1" - register "PcdEnableI2C2" = "0" - register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "1" - register "PcdEnableI2C5" = "1" - register "PcdEnableI2C6" = "0" - register "PunitPwrConfigDisable" = "0" # Enable SVID - register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" - register "PcdUsb3ClkSsc" = "1" - register "PcdDispClkSsc" = "1" - register "PcdSataClkSsc" = "1" - register "PcdEnableSata" = "0" # Disable SATA - register "Usb2Port0PerPortPeTxiSet" = "7" - register "Usb2Port0PerPortTxiSet" = "5" - register "Usb2Port0IUsbTxEmphasisEn" = "2" - register "Usb2Port0PerPortTxPeHalf" = "1" - register "Usb2Port1PerPortPeTxiSet" = "7" - register "Usb2Port1PerPortTxiSet" = "3" - register "Usb2Port1IUsbTxEmphasisEn" = "2" - register "Usb2Port1PerPortTxPeHalf" = "1" - register "Usb2Port2PerPortPeTxiSet" = "7" - register "Usb2Port2PerPortTxiSet" = "3" - register "Usb2Port2IUsbTxEmphasisEn" = "2" - register "Usb2Port2PerPortTxPeHalf" = "1" - register "Usb2Port3PerPortPeTxiSet" = "7" - register "Usb2Port3PerPortTxiSet" = "3" - register "Usb2Port3IUsbTxEmphasisEn" = "2" - register "Usb2Port3PerPortTxPeHalf" = "1" - register "Usb2Port4PerPortPeTxiSet" = "7" - register "Usb2Port4PerPortTxiSet" = "3" - register "Usb2Port4IUsbTxEmphasisEn" = "2" - register "Usb2Port4PerPortTxPeHalf" = "1" - register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" - register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" - register "PcdSataInterfaceSpeed" = "3" - register "PcdPchSsicEnable" = "1" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM - register "PMIC_I2CBus" = "1" - register "ISPEnable" = "0" # Disable IUNIT - register "ISPPciDevConfig" = "3" - register "PcdSdDetectChk" = "0" # Disable SD card detect - register "I2C0Frequency" = "1" - register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz - register "I2C2Frequency" = "1" - register "I2C3Frequency" = "1" - register "I2C4Frequency" = "1" - register "I2C5Frequency" = "1" - register "I2C6Frequency" = "1" - - # LPE audio codec settings - register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - - # Enable devices in ACPI mode - register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" - register "lpe_acpi_mode" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display - device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port - device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port - device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio - device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 on end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 - device pci 18.3 off end # 8086 22c3 - I2C Port 3 - device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 on end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 - device pci 18.7 off end # 8086 22c7 - I2C Port 7 - device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 0F04 - HD Audio - device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1 - device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA - device pci 1e.1 off end # 8086 0F08 - PWM 1 - device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 off end # 8086 228a - HSUART 1 - device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 on end # 8086 228e - SPI 1 - device pci 1e.6 off end # 8086 2290 - SPI 2 - device pci 1e.7 off end # 8086 22ac - SPI 3 - device pci 1f.0 on # 8086 229c - LPC bridge - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Bridge - device pci 1f.3 off end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/google/cyan/variants/relm/overridetree.cb b/src/mainboard/google/cyan/variants/relm/overridetree.cb new file mode 100644 index 0000000..ea1942d --- /dev/null +++ b/src/mainboard/google/cyan/variants/relm/overridetree.cb @@ -0,0 +1,9 @@ +chip soc/intel/braswell + + register "PcdEnableI2C0" = "1" # Touchscreen + + device domain 0 on + device pci 12.0 on end # 8086 0F16 - SD Port + device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen + end +end diff --git a/src/mainboard/google/cyan/variants/setzer/devicetree.cb b/src/mainboard/google/cyan/variants/setzer/devicetree.cb deleted file mode 100644 index f0b2c6f..0000000 --- a/src/mainboard/google/cyan/variants/setzer/devicetree.cb +++ /dev/null @@ -1,146 +0,0 @@ -chip soc/intel/braswell - - ############################################################ - # Set the parameters for MemoryInit - ############################################################ - - register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB - - register "PcdMrcInitMmioSize" = "0x0800" - register "PcdMrcInitSpdAddr1" = "0xa0" - register "PcdMrcInitSpdAddr2" = "0xa2" - register "PcdIgdDvmt50PreAlloc" = "1" - register "PcdApertureSize" = "2" - register "PcdGttSize" = "1" - register "PcdDvfsEnable" = "1" - register "PcdCaMirrorEn" = "1" - - ############################################################ - # Set the parameters for SiliconInit - ############################################################ - - register "PcdSdcardMode" = "PCH_ACPI_MODE" - register "PcdEnableHsuart0" = "0" - register "PcdEnableHsuart1" = "1" - register "PcdEnableAzalia" = "1" - register "PcdEnableXhci" = "1" - register "PcdEnableLpe" = "1" - register "PcdEnableDma0" = "1" - register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "1" - register "PcdEnableI2C1" = "1" - register "PcdEnableI2C2" = "0" - register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "1" - register "PcdEnableI2C5" = "1" - register "PcdEnableI2C6" = "0" - register "PunitPwrConfigDisable" = "0" # Enable SVID - register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" - register "PcdUsb3ClkSsc" = "1" - register "PcdDispClkSsc" = "1" - register "PcdSataClkSsc" = "1" - register "PcdEnableSata" = "0" # Disable SATA - register "Usb2Port0PerPortPeTxiSet" = "7" - register "Usb2Port0PerPortTxiSet" = "5" - register "Usb2Port0IUsbTxEmphasisEn" = "2" - register "Usb2Port0PerPortTxPeHalf" = "1" - register "Usb2Port1PerPortPeTxiSet" = "7" - register "Usb2Port1PerPortTxiSet" = "3" - register "Usb2Port1IUsbTxEmphasisEn" = "2" - register "Usb2Port1PerPortTxPeHalf" = "1" - register "Usb2Port2PerPortPeTxiSet" = "7" - register "Usb2Port2PerPortTxiSet" = "3" - register "Usb2Port2IUsbTxEmphasisEn" = "2" - register "Usb2Port2PerPortTxPeHalf" = "1" - register "Usb2Port3PerPortPeTxiSet" = "7" - register "Usb2Port3PerPortTxiSet" = "3" - register "Usb2Port3IUsbTxEmphasisEn" = "2" - register "Usb2Port3PerPortTxPeHalf" = "1" - register "Usb2Port4PerPortPeTxiSet" = "7" - register "Usb2Port4PerPortTxiSet" = "3" - register "Usb2Port4IUsbTxEmphasisEn" = "2" - register "Usb2Port4PerPortTxPeHalf" = "1" - register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" - register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" - register "PcdSataInterfaceSpeed" = "3" - register "PcdPchSsicEnable" = "0" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM - register "PMIC_I2CBus" = "1" - register "ISPEnable" = "0" # Disable IUNIT - register "ISPPciDevConfig" = "3" - register "PcdSdDetectChk" = "0" # Disable SD card detect - register "I2C0Frequency" = "1" - register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz - register "I2C2Frequency" = "1" - register "I2C3Frequency" = "1" - register "I2C4Frequency" = "1" - register "I2C5Frequency" = "1" - register "I2C6Frequency" = "1" - - # LPE audio codec settings - register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - - # Enable devices in ACPI mode - register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" - register "lpe_acpi_mode" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display - device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port - device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port - device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio - device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 on end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 - device pci 18.3 off end # 8086 22c3 - I2C Port 3 - device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 on end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 - device pci 18.7 off end # 8086 22c7 - I2C Port 7 - device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 0F04 - HD Audio - device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1 - device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA - device pci 1e.1 off end # 8086 0F08 - PWM 1 - device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 on end # 8086 228a - HSUART 1 - device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 on end # 8086 228e - SPI 1 - device pci 1e.6 off end # 8086 2290 - SPI 2 - device pci 1e.7 off end # 8086 22ac - SPI 3 - device pci 1f.0 on # 8086 229c - LPC bridge - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Bridge - device pci 1f.3 off end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/google/cyan/variants/setzer/overridetree.cb b/src/mainboard/google/cyan/variants/setzer/overridetree.cb new file mode 100644 index 0000000..242a9ce --- /dev/null +++ b/src/mainboard/google/cyan/variants/setzer/overridetree.cb @@ -0,0 +1,11 @@ +chip soc/intel/braswell + + register "PcdEnableI2C0" = "1" # Touchscreen + + register "PcdPchSsicEnable" = "0" + + device domain 0 on + device pci 12.0 on end # 8086 0F16 - SD Port + device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen + end +end diff --git a/src/mainboard/google/cyan/variants/terra/overridetree.cb b/src/mainboard/google/cyan/variants/terra/overridetree.cb new file mode 100644 index 0000000..58b8a23 --- /dev/null +++ b/src/mainboard/google/cyan/variants/terra/overridetree.cb @@ -0,0 +1,6 @@ +chip soc/intel/braswell + + device domain 0 on + device pci 12.0 on end # 8086 0F16 - SD Port + end +end diff --git a/src/mainboard/google/cyan/variants/ultima/devicetree.cb b/src/mainboard/google/cyan/variants/ultima/devicetree.cb deleted file mode 100644 index d4ed38b..0000000 --- a/src/mainboard/google/cyan/variants/ultima/devicetree.cb +++ /dev/null @@ -1,140 +0,0 @@ -chip soc/intel/braswell - - ############################################################ - # Set the parameters for MemoryInit - ############################################################ - - register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB - - register "PcdMrcInitMmioSize" = "0x0800" - register "PcdMrcInitSpdAddr1" = "0xa0" - register "PcdMrcInitSpdAddr2" = "0xa2" - register "PcdIgdDvmt50PreAlloc" = "1" - register "PcdApertureSize" = "2" - register "PcdGttSize" = "1" - register "PcdDvfsEnable" = "1" - register "PcdCaMirrorEn" = "1" - - ############################################################ - # Set the parameters for SiliconInit - ############################################################ - - register "PcdSdcardMode" = "PCH_ACPI_MODE" - register "PcdEnableHsuart0" = "0" - register "PcdEnableHsuart1" = "0" - register "PcdEnableAzalia" = "1" - register "PcdEnableXhci" = "1" - register "PcdEnableLpe" = "1" - register "PcdEnableDma0" = "1" - register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "1" - register "PcdEnableI2C1" = "1" - register "PcdEnableI2C2" = "0" - register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "1" - register "PcdEnableI2C5" = "1" - register "PcdEnableI2C6" = "0" - register "PunitPwrConfigDisable" = "0" # Enable SVID - register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" - register "PcdUsb3ClkSsc" = "1" - register "PcdDispClkSsc" = "1" - register "PcdSataClkSsc" = "1" - register "PcdEnableSata" = "0" # Disable SATA - register "Usb2Port0PerPortPeTxiSet" = "7" - register "Usb2Port0PerPortTxiSet" = "5" - register "Usb2Port0IUsbTxEmphasisEn" = "2" - register "Usb2Port0PerPortTxPeHalf" = "1" - register "Usb2Port1PerPortPeTxiSet" = "7" - register "Usb2Port1PerPortTxiSet" = "3" - register "Usb2Port1IUsbTxEmphasisEn" = "2" - register "Usb2Port1PerPortTxPeHalf" = "1" - register "Usb2Port2PerPortPeTxiSet" = "7" - register "Usb2Port2PerPortTxiSet" = "3" - register "Usb2Port2IUsbTxEmphasisEn" = "2" - register "Usb2Port2PerPortTxPeHalf" = "1" - register "Usb2Port3PerPortPeTxiSet" = "7" - register "Usb2Port3PerPortTxiSet" = "3" - register "Usb2Port3IUsbTxEmphasisEn" = "2" - register "Usb2Port3PerPortTxPeHalf" = "1" - register "Usb2Port4PerPortPeTxiSet" = "7" - register "Usb2Port4PerPortTxiSet" = "3" - register "Usb2Port4IUsbTxEmphasisEn" = "2" - register "Usb2Port4PerPortTxPeHalf" = "1" - register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" - register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" - register "PcdSataInterfaceSpeed" = "3" - register "PcdPchSsicEnable" = "0" - register "PcdPchUsbHsicPort" = "0" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM - register "PMIC_I2CBus" = "1" - register "ISPEnable" = "0" # Disable IUNIT - register "ISPPciDevConfig" = "3" - register "PcdSdDetectChk" = "0" # Disable SD card detect - - # LPE audio codec settings - register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - - # Enable devices in ACPI mode - register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" - register "lpe_acpi_mode" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display - device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port - device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port - device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio - device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 on end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 - device pci 18.3 off end # 8086 22c3 - I2C Port 3 - device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 on end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 - device pci 18.7 off end # 8086 22c7 - I2C Port 7 - device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 2284 - HD Audio - device pci 1c.0 on end # 8086 22c8 - PCIe Root Port 1 - device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 22cc - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA - device pci 1e.1 off end # 8086 0F08 - PWM 1 - device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 off end # 8086 228a - HSUART 1 - device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 on end # 8086 228e - SPI 1 - device pci 1e.6 off end # 8086 2290 - SPI 2 - device pci 1e.7 off end # 8086 22ac - SPI 3 - device pci 1f.0 on # 8086 229c - LPC bridge - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Bridge - device pci 1f.3 off end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/google/cyan/variants/ultima/overridetree.cb b/src/mainboard/google/cyan/variants/ultima/overridetree.cb new file mode 100644 index 0000000..075e02c --- /dev/null +++ b/src/mainboard/google/cyan/variants/ultima/overridetree.cb @@ -0,0 +1,12 @@ +chip soc/intel/braswell + + register "PcdEnableI2C0" = "1" # Touchscreen + + register "PcdPchSsicEnable" = "0" + register "PcdPchUsbHsicPort" = "0" + + device domain 0 on + device pci 12.0 on end # 8086 0F16 - SD Port + device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen + end +end diff --git a/src/mainboard/google/cyan/variants/wizpig/devicetree.cb b/src/mainboard/google/cyan/variants/wizpig/devicetree.cb deleted file mode 100644 index 7be7a0f..0000000 --- a/src/mainboard/google/cyan/variants/wizpig/devicetree.cb +++ /dev/null @@ -1,147 +0,0 @@ -chip soc/intel/braswell - - ############################################################ - # Set the parameters for MemoryInit - ############################################################ - - register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB - - register "PcdMrcInitMmioSize" = "0x0800" - register "PcdMrcInitSpdAddr1" = "0xa0" - register "PcdMrcInitSpdAddr2" = "0xa2" - register "PcdIgdDvmt50PreAlloc" = "1" - register "PcdApertureSize" = "2" - register "PcdGttSize" = "1" - register "PcdDvfsEnable" = "1" - register "PcdCaMirrorEn" = "1" - - ############################################################ - # Set the parameters for SiliconInit - ############################################################ - - register "PcdSdcardMode" = "PCH_ACPI_MODE" - register "PcdEnableHsuart0" = "0" - register "PcdEnableHsuart1" = "1" - register "PcdEnableAzalia" = "1" - register "PcdEnableXhci" = "1" - register "PcdEnableLpe" = "1" - register "PcdEnableDma0" = "1" - register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "1" - register "PcdEnableI2C1" = "1" - register "PcdEnableI2C2" = "0" - register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "1" - register "PcdEnableI2C5" = "1" - register "PcdEnableI2C6" = "0" - register "PunitPwrConfigDisable" = "0" # Enable SVID - register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" - register "PcdUsb3ClkSsc" = "1" - register "PcdDispClkSsc" = "1" - register "PcdSataClkSsc" = "1" - register "PcdEnableSata" = "0" # Disable SATA - register "Usb2Port0PerPortPeTxiSet" = "7" - register "Usb2Port0PerPortTxiSet" = "0" - register "Usb2Port0IUsbTxEmphasisEn" = "2" - register "Usb2Port0PerPortTxPeHalf" = "1" - register "Usb2Port1PerPortPeTxiSet" = "7" - register "Usb2Port1PerPortTxiSet" = "0" - register "Usb2Port1IUsbTxEmphasisEn" = "2" - register "Usb2Port1PerPortTxPeHalf" = "1" - register "Usb2Port2PerPortPeTxiSet" = "7" - register "Usb2Port2PerPortTxiSet" = "0" - register "Usb2Port2IUsbTxEmphasisEn" = "2" - register "Usb2Port2PerPortTxPeHalf" = "1" - register "Usb2Port3PerPortPeTxiSet" = "7" - register "Usb2Port3PerPortTxiSet" = "0" - register "Usb2Port3IUsbTxEmphasisEn" = "2" - register "Usb2Port3PerPortTxPeHalf" = "1" - register "Usb2Port4PerPortPeTxiSet" = "7" - register "Usb2Port4PerPortTxiSet" = "3" - register "Usb2Port4IUsbTxEmphasisEn" = "2" - register "Usb2Port4PerPortTxPeHalf" = "1" - register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" - register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" - register "PcdSataInterfaceSpeed" = "3" - register "PcdPchSsicEnable" = "0" - register "PcdPchUsbHsicPort" = "0" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM - register "PMIC_I2CBus" = "1" - register "ISPEnable" = "0" # Disable IUNIT - register "ISPPciDevConfig" = "3" - register "PcdSdDetectChk" = "0" # Disable SD card detect - register "I2C0Frequency" = "1" - register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz - register "I2C2Frequency" = "1" - register "I2C3Frequency" = "1" - register "I2C4Frequency" = "1" - register "I2C5Frequency" = "1" - register "I2C6Frequency" = "1" - - # LPE audio codec settings - register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - - # Enable devices in ACPI mode - register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" - register "lpe_acpi_mode" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display - device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port - device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port - device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio - device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 on end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 - device pci 18.3 off end # 8086 22c3 - I2C Port 3 - device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 on end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 - device pci 18.7 off end # 8086 22c7 - I2C Port 7 - device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 0F04 - HD Audio - device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1 - device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA - device pci 1e.1 off end # 8086 0F08 - PWM 1 - device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 on end # 8086 228a - HSUART 1 - device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 on end # 8086 228e - SPI 1 - device pci 1e.6 off end # 8086 2290 - SPI 2 - device pci 1e.7 off end # 8086 22ac - SPI 3 - device pci 1f.0 on # 8086 229c - LPC bridge - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Bridge - device pci 1f.3 off end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/google/cyan/variants/wizpig/overridetree.cb b/src/mainboard/google/cyan/variants/wizpig/overridetree.cb new file mode 100644 index 0000000..71428a9 --- /dev/null +++ b/src/mainboard/google/cyan/variants/wizpig/overridetree.cb @@ -0,0 +1,33 @@ +chip soc/intel/braswell + + register "PcdEnableI2C0" = "1" # Touchscreen + + register "Usb2Port0PerPortPeTxiSet" = "7" + register "Usb2Port0PerPortTxiSet" = "0" + register "Usb2Port0IUsbTxEmphasisEn" = "2" + register "Usb2Port0PerPortTxPeHalf" = "1" + register "Usb2Port1PerPortPeTxiSet" = "7" + register "Usb2Port1PerPortTxiSet" = "0" + register "Usb2Port1IUsbTxEmphasisEn" = "2" + register "Usb2Port1PerPortTxPeHalf" = "1" + register "Usb2Port2PerPortPeTxiSet" = "7" + register "Usb2Port2PerPortTxiSet" = "0" + register "Usb2Port2IUsbTxEmphasisEn" = "2" + register "Usb2Port2PerPortTxPeHalf" = "1" + register "Usb2Port3PerPortPeTxiSet" = "7" + register "Usb2Port3PerPortTxiSet" = "0" + register "Usb2Port3IUsbTxEmphasisEn" = "2" + register "Usb2Port3PerPortTxPeHalf" = "1" + register "Usb2Port4PerPortPeTxiSet" = "7" + register "Usb2Port4PerPortTxiSet" = "3" + register "Usb2Port4IUsbTxEmphasisEn" = "2" + register "Usb2Port4PerPortTxPeHalf" = "1" + + register "PcdPchSsicEnable" = "0" + register "PcdPchUsbHsicPort" = "0" + + device domain 0 on + device pci 12.0 on end # 8086 0F16 - SD Port + device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen + end +end -- To view, visit https://review.coreboot.org/c/coreboot/+/39964 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9928cc59adcfda4661ddfdfa95f53a7820053b4a Gerrit-Change-Number: 39964 Gerrit-PatchSet: 1 Gerrit-Owner: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-MessageType: newchange

2 12

Change in coreboot[master]: mb/google/glados: convert to overridetree
by Matt DeVillier (Code Review) 03 Apr '20

03 Apr '20

Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39983 ) Change subject: mb/google/glados: convert to overridetree ...................................................................... mb/google/glados: convert to overridetree Simply glados variants by converting to overridetree format. Change-Id: I6dd7a4b1ae7f1d3ce9fadb06ea95e021a1c880a5 Signed-off-by: Matt DeVillier <matt.devillier(a)gmail.com> --- M src/mainboard/google/glados/Kconfig R src/mainboard/google/glados/devicetree.cb A src/mainboard/google/glados/variants/asuka/overridetree.cb D src/mainboard/google/glados/variants/caroline/devicetree.cb A src/mainboard/google/glados/variants/caroline/overridetree.cb D src/mainboard/google/glados/variants/cave/devicetree.cb A src/mainboard/google/glados/variants/cave/overridetree.cb D src/mainboard/google/glados/variants/chell/devicetree.cb A src/mainboard/google/glados/variants/chell/overridetree.cb D src/mainboard/google/glados/variants/glados/devicetree.cb A src/mainboard/google/glados/variants/glados/overridetree.cb D src/mainboard/google/glados/variants/lars/devicetree.cb A src/mainboard/google/glados/variants/lars/overridetree.cb D src/mainboard/google/glados/variants/sentry/devicetree.cb A src/mainboard/google/glados/variants/sentry/overridetree.cb 15 files changed, 561 insertions(+), 1,474 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/83/39983/1 diff --git a/src/mainboard/google/glados/Kconfig b/src/mainboard/google/glados/Kconfig index d0ff377..5e3545a 100644 --- a/src/mainboard/google/glados/Kconfig +++ b/src/mainboard/google/glados/Kconfig @@ -60,9 +60,9 @@ default "lars" if BOARD_GOOGLE_LARS default "sentry" if BOARD_GOOGLE_SENTRY -config DEVICETREE +config OVERRIDE_DEVICETREE string - default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb" + default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb" config MAX_CPUS int diff --git a/src/mainboard/google/glados/variants/asuka/devicetree.cb b/src/mainboard/google/glados/devicetree.cb similarity index 69% rename from src/mainboard/google/glados/variants/asuka/devicetree.cb rename to src/mainboard/google/glados/devicetree.cb index 395b572..e9c1cac 100644 --- a/src/mainboard/google/glados/variants/asuka/devicetree.cb +++ b/src/mainboard/google/glados/devicetree.cb @@ -77,19 +77,6 @@ # RP 1 uses SRCCLKREQ1# register "PcieRpClkReqNumber[0]" = "1" - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_MID(OC2)" # Card Reader - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (board) - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # PIC MCU - register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board) - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Card Reader - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (board) - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) - # Must leave UART0 enabled or SD/eMMC will not work as PCI register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, @@ -128,23 +115,8 @@ device pci 14.0 on end # USB xHCI device pci 14.1 off end # USB xDCI (OTG) device pci 14.2 on end # Thermal Subsystem - device pci 15.0 on - chip drivers/i2c/generic - register "hid" = ""ELAN0001"" - register "desc" = ""ELAN Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" - device i2c 10 on end - end - end # I2C #0 - device pci 15.1 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" - register "wake" = "GPE0_DW0_05" - device i2c 15 on end - end - end # I2C #1 + device pci 15.0 on end # I2C #0 + device pci 15.1 on end # I2C #1 device pci 15.2 off end # I2C #2 device pci 15.3 off end # I2C #3 device pci 16.0 on end # Management Engine Interface 1 @@ -155,29 +127,7 @@ device pci 17.0 off end # SATA device pci 19.0 on end # UART #2 device pci 19.1 off end # I2C #5 - device pci 19.2 on - chip drivers/i2c/nau8825 - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" - register "jkdet_enable" = "1" - register "jkdet_pull_enable" = "0" # R389 - register "jkdet_polarity" = "1" # ActiveLow - register "vref_impedance" = "2" # 125kOhm - register "micbias_voltage" = "6" # 2.754 - register "sar_threshold_num" = "4" - register "sar_threshold[0]" = "0x08" - register "sar_threshold[1]" = "0x12" - register "sar_threshold[2]" = "0x26" - register "sar_threshold[3]" = "0x73" - register "sar_hysteresis" = "0" - register "sar_voltage" = "6" - register "sar_compare_time" = "1" # 1us - register "sar_sampling_time" = "1" # 4us - register "short_key_debounce" = "3" # 30ms - register "jack_insert_debounce" = "7" # 512ms - register "jack_eject_debounce" = "0" - device i2c 1a on end - end - end # I2C #4 + device pci 19.2 on end # I2C #4 device pci 1c.0 on chip drivers/intel/wifi register "wake" = "GPE0_DW0_16" @@ -212,14 +162,7 @@ end # LPC Interface device pci 1f.1 on end # P2SB device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on - chip drivers/generic/max98357a - register "hid" = ""MX98357A"" - register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)" - register "sdmode_delay" = "5" - device generic 0 on end - end - end # Intel HDA + device pci 1f.3 on end # Intel HDA device pci 1f.4 on end # SMBus device pci 1f.5 on end # PCH SPI device pci 1f.6 off end # GbE diff --git a/src/mainboard/google/glados/variants/asuka/overridetree.cb b/src/mainboard/google/glados/variants/asuka/overridetree.cb new file mode 100644 index 0000000..4be1fc6 --- /dev/null +++ b/src/mainboard/google/glados/variants/asuka/overridetree.cb @@ -0,0 +1,66 @@ +chip soc/intel/skylake + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 + register "usb2_ports[1]" = "USB2_PORT_MID(OC2)" # Card Reader + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (board) + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # PIC MCU + register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board) + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Card Reader + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (board) + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) + + device domain 0 on + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ELAN0001"" + register "desc" = ""ELAN Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + device i2c 10 on end + end + end # I2C #0 + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_05" + device i2c 15 on end + end + end # I2C #1 + device pci 19.2 on + chip drivers/i2c/nau8825 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "0" # R389 + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x08" + register "sar_threshold[1]" = "0x12" + register "sar_threshold[2]" = "0x26" + register "sar_threshold[3]" = "0x73" + register "sar_hysteresis" = "0" + register "sar_voltage" = "6" + register "sar_compare_time" = "1" # 1us + register "sar_sampling_time" = "1" # 4us + register "short_key_debounce" = "3" # 30ms + register "jack_insert_debounce" = "7" # 512ms + register "jack_eject_debounce" = "0" + device i2c 1a on end + end + end # I2C #4 + device pci 1f.3 on + chip drivers/generic/max98357a + register "hid" = ""MX98357A"" + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)" + register "sdmode_delay" = "5" + device generic 0 on end + end + end # Intel HDA + end +end diff --git a/src/mainboard/google/glados/variants/caroline/devicetree.cb b/src/mainboard/google/glados/variants/caroline/devicetree.cb deleted file mode 100644 index 3e733d6..0000000 --- a/src/mainboard/google/glados/variants/caroline/devicetree.cb +++ /dev/null @@ -1,241 +0,0 @@ -chip soc/intel/skylake - - register "gpu_pp_up_delay_ms" = "200" - register "gpu_pp_down_delay_ms" = " 50" - register "gpu_pp_cycle_delay_ms" = "500" - register "gpu_pp_backlight_on_delay_ms" = " 1" - register "gpu_pp_backlight_off_delay_ms" = "200" - - register "gpu_pch_backlight_pwm_hz" = "1000" - - # Enable deep Sx states - register "deep_s3_enable_ac" = "0" - register "deep_s3_enable_dc" = "0" - register "deep_s5_enable_ac" = "1" - register "deep_s5_enable_dc" = "1" - register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - register "gpe0_dw0" = "GPP_B" - register "gpe0_dw1" = "GPP_D" - register "gpe0_dw2" = "GPP_E" - - # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x000c0201" - - # Enable "Intel Speed Shift Technology" - register "speed_shift_enable" = "1" - - # Enable DPTF - register "dptf_enable" = "1" - - # FSP Configuration - register "ProbelessTrace" = "0" - register "EnableLan" = "0" - register "EnableSata" = "0" - register "SataSalpSupport" = "0" - register "SataMode" = "0" - register "SataPortsEnable[0]" = "0" - register "EnableAzalia" = "1" - register "DspEnable" = "1" - register "IoBufferOwnership" = "3" - register "EnableTraceHub" = "0" - register "SsicPortEnable" = "0" - register "SmbusEnable" = "1" - register "Cio2Enable" = "0" - register "ScsEmmcEnabled" = "1" - register "ScsEmmcHs400Enabled" = "1" - register "ScsSdCardEnabled" = "2" - register "PttSwitch" = "0" - register "SkipExtGfxScan" = "1" - register "Device4Enable" = "1" - register "HeciEnabled" = "0" - register "SaGv" = "3" - register "PmConfigSlpS3MinAssert" = "2" # 50ms - register "PmConfigSlpS4MinAssert" = "1" # 1s - register "PmConfigSlpSusMinAssert" = "1" # 500ms - register "PmConfigSlpAMinAssert" = "3" # 2s - register "PmTimerDisabled" = "1" - - register "pirqa_routing" = "PCH_IRQ11" - register "pirqb_routing" = "PCH_IRQ10" - register "pirqc_routing" = "PCH_IRQ11" - register "pirqd_routing" = "PCH_IRQ11" - register "pirqe_routing" = "PCH_IRQ11" - register "pirqf_routing" = "PCH_IRQ11" - register "pirqg_routing" = "PCH_IRQ11" - register "pirqh_routing" = "PCH_IRQ11" - - # VR Slew rate setting for improving audible noise - register "AcousticNoiseMitigation" = "1" - register "SlowSlewRateForIa" = "3" # Fast/16 - register "SlowSlewRateForGt" = "3" # Fast/16 - register "SlowSlewRateForSa" = "0" # Fast/2 - register "FastPkgCRampDisable" = "0" - - # Enable Root port 1 - register "PcieRpEnable[0]" = "1" - # Enable CLKREQ# - register "PcieRpClkReqSupport[0]" = "1" - # RP 1 uses SRCCLKREQ1# - register "PcieRpClkReqNumber[0]" = "1" - - register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-C Port (main) - register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (sub) - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Empty - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Empty - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (main) - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (sub) - register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Empty - register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty - - # Must leave UART0 enabled or SD/eMMC will not work as PCI - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, - [PchSerialIoIndexI2C1] = PchSerialIoPci, - [PchSerialIoIndexI2C2] = PchSerialIoDisabled, - [PchSerialIoIndexI2C3] = PchSerialIoDisabled, - [PchSerialIoIndexI2C4] = PchSerialIoPci, - [PchSerialIoIndexI2C5] = PchSerialIoDisabled, - [PchSerialIoIndexSpi0] = PchSerialIoDisabled, - [PchSerialIoIndexSpi1] = PchSerialIoDisabled, - [PchSerialIoIndexUart0] = PchSerialIoPci, - [PchSerialIoIndexUart1] = PchSerialIoDisabled, - [PchSerialIoIndexUart2] = PchSerialIoSkipInit, - }" - - # I2C4 is 1.8V - register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - - # PL2 override 15W - register "tdp_pl2_override" = "15" - - # Send an extra VR mailbox command for the supported MPS IMVP8 model - register "SendVrMbxCmd" = "1" - - # TCC of 90C - register "tcc_offset" = "10" - - # Lock Down - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - }" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 14.0 on end # USB xHCI - device pci 14.1 off end # USB xDCI (OTG) - device pci 14.2 on end # Thermal Subsystem - device pci 15.0 on - chip drivers/i2c/generic - register "hid" = ""ATML0001"" - register "desc" = ""Atmel Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" - device i2c 4b on end - end - end # I2C #0 - device pci 15.1 on - chip drivers/i2c/generic - register "hid" = ""ATML0000"" - register "desc" = ""Atmel Touchpad"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" - register "wake" = "GPE0_DW0_05" - device i2c 4a on end - end - end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 17.0 off end # SATA - device pci 19.0 on end # UART #2 - device pci 19.1 off end # I2C #5 - device pci 19.2 on - chip drivers/i2c/nau8825 - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" - register "jkdet_enable" = "1" - register "jkdet_pull_enable" = "0" # R389 - register "jkdet_polarity" = "1" # ActiveLow - register "vref_impedance" = "2" # 125kOhm - register "micbias_voltage" = "6" # 2.754 - register "sar_threshold_num" = "4" - register "sar_threshold[0]" = "0x0c" - register "sar_threshold[1]" = "0x1c" - register "sar_threshold[2]" = "0x38" - register "sar_threshold[3]" = "0x60" - register "sar_hysteresis" = "1" - register "sar_voltage" = "0" # VDDA - register "sar_compare_time" = "0" # 500ns - register "sar_sampling_time" = "0" # 2us - register "short_key_debounce" = "2" # 100ms - register "jack_insert_debounce" = "4" # 64ms - register "jack_eject_debounce" = "4" # 64ms - device i2c 1a on end - end - chip drivers/i2c/generic - register "hid" = ""INT343B"" - register "desc" = ""SSM4567 Left Speaker Amp"" - register "uid" = "0" - device i2c 34 on end - end - chip drivers/i2c/generic - register "hid" = ""INT343B"" - register "desc" = ""SSM4567 Right Speaker Amp"" - register "uid" = "1" - device i2c 35 on end - end - end # I2C #4 - device pci 1c.0 on - chip drivers/intel/wifi - register "wake" = "GPE0_DW0_16" - device pci 00.0 on end - end - end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 off end # PCI Express Port 9 - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1e.0 on end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - device pci 1e.4 on end # eMMC - device pci 1e.5 off end # SDIO - device pci 1e.6 on end # SDCard - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Interface - device pci 1f.1 on end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on end # Intel HDA - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end diff --git a/src/mainboard/google/glados/variants/caroline/overridetree.cb b/src/mainboard/google/glados/variants/caroline/overridetree.cb new file mode 100644 index 0000000..ce36480 --- /dev/null +++ b/src/mainboard/google/glados/variants/caroline/overridetree.cb @@ -0,0 +1,91 @@ +chip soc/intel/skylake + + register "ScsSdCardEnabled" = "2" + + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + + # VR Slew rate setting for improving audible noise + register "AcousticNoiseMitigation" = "1" + register "SlowSlewRateForIa" = "3" # Fast/16 + register "SlowSlewRateForGt" = "3" # Fast/16 + register "SlowSlewRateForSa" = "0" # Fast/2 + register "FastPkgCRampDisable" = "0" + + register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-C Port (main) + register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (sub) + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Empty + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Empty + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (main) + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (sub) + register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Empty + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty + + # PL2 override 15W + register "tdp_pl2_override" = "15" + + # Send an extra VR mailbox command for the supported MPS IMVP8 model + register "SendVrMbxCmd" = "1" + + # TCC of 90C + register "tcc_offset" = "10" + + device domain 0 on + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ATML0001"" + register "desc" = ""Atmel Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + device i2c 4b on end + end + end # I2C #0 + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ATML0000"" + register "desc" = ""Atmel Touchpad"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_05" + device i2c 4a on end + end + end # I2C #1 + device pci 19.2 on + chip drivers/i2c/nau8825 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "0" # R389 + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x0c" + register "sar_threshold[1]" = "0x1c" + register "sar_threshold[2]" = "0x38" + register "sar_threshold[3]" = "0x60" + register "sar_hysteresis" = "1" + register "sar_voltage" = "0" # VDDA + register "sar_compare_time" = "0" # 500ns + register "sar_sampling_time" = "0" # 2us + register "short_key_debounce" = "2" # 100ms + register "jack_insert_debounce" = "4" # 64ms + register "jack_eject_debounce" = "4" # 64ms + device i2c 1a on end + end + chip drivers/i2c/generic + register "hid" = ""INT343B"" + register "desc" = ""SSM4567 Left Speaker Amp"" + register "uid" = "0" + device i2c 34 on end + end + chip drivers/i2c/generic + register "hid" = ""INT343B"" + register "desc" = ""SSM4567 Right Speaker Amp"" + register "uid" = "1" + device i2c 35 on end + end + end # I2C #4 + device pci 1e.6 on end # SDCard + end +end diff --git a/src/mainboard/google/glados/variants/cave/devicetree.cb b/src/mainboard/google/glados/variants/cave/devicetree.cb deleted file mode 100644 index ccc2302..0000000 --- a/src/mainboard/google/glados/variants/cave/devicetree.cb +++ /dev/null @@ -1,232 +0,0 @@ -chip soc/intel/skylake - - register "gpu_pp_up_delay_ms" = "200" - register "gpu_pp_down_delay_ms" = " 50" - register "gpu_pp_cycle_delay_ms" = "500" - register "gpu_pp_backlight_on_delay_ms" = " 1" - register "gpu_pp_backlight_off_delay_ms" = "200" - - register "gpu_pch_backlight_pwm_hz" = "1000" - - # Enable deep Sx states - register "deep_s3_enable_ac" = "0" - register "deep_s3_enable_dc" = "0" - register "deep_s5_enable_ac" = "1" - register "deep_s5_enable_dc" = "1" - register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - register "gpe0_dw0" = "GPP_B" - register "gpe0_dw1" = "GPP_D" - register "gpe0_dw2" = "GPP_E" - - # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x000c0201" - - # Enable "Intel Speed Shift Technology" - register "speed_shift_enable" = "1" - - # Enable DPTF - register "dptf_enable" = "1" - - # FSP Configuration - register "ProbelessTrace" = "0" - register "EnableLan" = "0" - register "EnableSata" = "0" - register "SataSalpSupport" = "0" - register "SataMode" = "0" - register "SataPortsEnable[0]" = "0" - register "EnableAzalia" = "1" - register "DspEnable" = "1" - register "IoBufferOwnership" = "3" - register "EnableTraceHub" = "0" - register "SsicPortEnable" = "0" - register "SmbusEnable" = "1" - register "Cio2Enable" = "0" - register "ScsEmmcEnabled" = "1" - register "ScsEmmcHs400Enabled" = "1" - register "ScsSdCardEnabled" = "2" - register "PttSwitch" = "0" - register "SkipExtGfxScan" = "1" - register "Device4Enable" = "1" - register "HeciEnabled" = "0" - register "SaGv" = "3" - register "PmConfigSlpS3MinAssert" = "2" # 50ms - register "PmConfigSlpS4MinAssert" = "1" # 1s - register "PmConfigSlpSusMinAssert" = "1" # 500ms - register "PmConfigSlpAMinAssert" = "3" # 2s - register "PmTimerDisabled" = "1" - - register "pirqa_routing" = "PCH_IRQ11" - register "pirqb_routing" = "PCH_IRQ10" - register "pirqc_routing" = "PCH_IRQ11" - register "pirqd_routing" = "PCH_IRQ11" - register "pirqe_routing" = "PCH_IRQ11" - register "pirqf_routing" = "PCH_IRQ11" - register "pirqg_routing" = "PCH_IRQ11" - register "pirqh_routing" = "PCH_IRQ11" - - # Enable Root port 1 - register "PcieRpEnable[0]" = "1" - # Enable CLKREQ# - register "PcieRpClkReqSupport[0]" = "1" - # RP 1 uses SRCCLKREQ1# - register "PcieRpClkReqNumber[0]" = "1" - - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port (board) - register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (flex) - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Type-A Port 1 - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Type-A Port 2 - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (board) - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (flex) - register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Type-A Port 1 - register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A Port 2 - - # Must leave UART0 enabled or SD/eMMC will not work as PCI - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, - [PchSerialIoIndexI2C1] = PchSerialIoPci, - [PchSerialIoIndexI2C2] = PchSerialIoDisabled, - [PchSerialIoIndexI2C3] = PchSerialIoDisabled, - [PchSerialIoIndexI2C4] = PchSerialIoPci, - [PchSerialIoIndexI2C5] = PchSerialIoDisabled, - [PchSerialIoIndexSpi0] = PchSerialIoDisabled, - [PchSerialIoIndexSpi1] = PchSerialIoDisabled, - [PchSerialIoIndexUart0] = PchSerialIoPci, - [PchSerialIoIndexUart1] = PchSerialIoDisabled, - [PchSerialIoIndexUart2] = PchSerialIoSkipInit, - }" - - # I2C4 is 1.8V - register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - - # PL2 override 15W - register "tdp_pl2_override" = "15" - - # Send an extra VR mailbox command for the supported MPS IMVP8 model - register "SendVrMbxCmd" = "1" - - # TCC of 90C - register "tcc_offset" = "10" - - # Use default SD card detect GPIO configuration - register "sdcard_cd_gpio_default" = "GPP_A7" - - # Lock Down - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - }" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 14.0 on end # USB xHCI - device pci 14.1 off end # USB xDCI (OTG) - device pci 14.2 on end # Thermal Subsystem - device pci 15.0 on - chip drivers/i2c/generic - register "hid" = ""ELAN0001"" - register "desc" = ""ELAN Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" - device i2c 10 on end - end - end # I2C #0 - device pci 15.1 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" - register "wake" = "GPE0_DW0_05" - device i2c 15 on end - end - end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 17.0 off end # SATA - device pci 19.0 on end # UART #2 - device pci 19.1 off end # I2C #5 - device pci 19.2 on - chip drivers/i2c/nau8825 - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" - register "jkdet_enable" = "1" - register "jkdet_pull_enable" = "0" # R389 - register "jkdet_polarity" = "1" # ActiveLow - register "vref_impedance" = "2" # 125kOhm - register "micbias_voltage" = "6" # 2.754 - register "sar_threshold_num" = "4" - register "sar_threshold[0]" = "0x0c" - register "sar_threshold[1]" = "0x1e" - register "sar_threshold[2]" = "0x38" - register "sar_threshold[3]" = "0x60" - register "sar_hysteresis" = "1" - register "sar_voltage" = "0" # VDDA - register "sar_compare_time" = "0" # 500ns - register "sar_sampling_time" = "0" # 2us - register "short_key_debounce" = "2" # 100ms - register "jack_insert_debounce" = "7" # 512ms - register "jack_eject_debounce" = "7" # 512ms - device i2c 1a on end - end - end # I2C #4 - device pci 1c.0 on - chip drivers/intel/wifi - register "wake" = "GPE0_DW0_16" - device pci 00.0 on end - end - end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 off end # PCI Express Port 9 - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1e.0 on end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - device pci 1e.4 on end # eMMC - device pci 1e.5 off end # SDIO - device pci 1e.6 on end # SDCard - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Interface - device pci 1f.1 on end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on - chip drivers/generic/max98357a - register "hid" = ""MX98357A"" - register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)" - register "sdmode_delay" = "5" - device generic 0 on end - end - end # Intel HDA - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end diff --git a/src/mainboard/google/glados/variants/cave/overridetree.cb b/src/mainboard/google/glados/variants/cave/overridetree.cb new file mode 100644 index 0000000..ae32b3d --- /dev/null +++ b/src/mainboard/google/glados/variants/cave/overridetree.cb @@ -0,0 +1,83 @@ +chip soc/intel/skylake + + register "ScsSdCardEnabled" = "2" + + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port (board) + register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (flex) + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Type-A Port 1 + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Type-A Port 2 + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (board) + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (flex) + register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A Port 2 + + # PL2 override 15W + register "tdp_pl2_override" = "15" + + # Send an extra VR mailbox command for the supported MPS IMVP8 model + register "SendVrMbxCmd" = "1" + + # TCC of 90C + register "tcc_offset" = "10" + + # Use default SD card detect GPIO configuration + register "sdcard_cd_gpio_default" = "GPP_A7" + + device domain 0 on + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ELAN0001"" + register "desc" = ""ELAN Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + device i2c 10 on end + end + end # I2C #0 + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_05" + device i2c 15 on end + end + end # I2C #1 + device pci 19.2 on + chip drivers/i2c/nau8825 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "0" # R389 + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x0c" + register "sar_threshold[1]" = "0x1e" + register "sar_threshold[2]" = "0x38" + register "sar_threshold[3]" = "0x60" + register "sar_hysteresis" = "1" + register "sar_voltage" = "0" # VDDA + register "sar_compare_time" = "0" # 500ns + register "sar_sampling_time" = "0" # 2us + register "short_key_debounce" = "2" # 100ms + register "jack_insert_debounce" = "7" # 512ms + register "jack_eject_debounce" = "7" # 512ms + device i2c 1a on end + end + end # I2C #4 + device pci 1e.6 on end # SDCard + device pci 1f.3 on + chip drivers/generic/max98357a + register "hid" = ""MX98357A"" + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)" + register "sdmode_delay" = "5" + device generic 0 on end + end + end # Intel HDA + end +end diff --git a/src/mainboard/google/glados/variants/chell/devicetree.cb b/src/mainboard/google/glados/variants/chell/devicetree.cb deleted file mode 100644 index bbc74f8..0000000 --- a/src/mainboard/google/glados/variants/chell/devicetree.cb +++ /dev/null @@ -1,228 +0,0 @@ -chip soc/intel/skylake - - register "gpu_pp_up_delay_ms" = "200" - register "gpu_pp_down_delay_ms" = " 50" - register "gpu_pp_cycle_delay_ms" = "500" - register "gpu_pp_backlight_on_delay_ms" = " 1" - register "gpu_pp_backlight_off_delay_ms" = "200" - - register "gpu_pch_backlight_pwm_hz" = "1000" - - # Enable deep Sx states - register "deep_s3_enable_ac" = "0" - register "deep_s3_enable_dc" = "0" - register "deep_s5_enable_ac" = "1" - register "deep_s5_enable_dc" = "1" - register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - register "gpe0_dw0" = "GPP_B" - register "gpe0_dw1" = "GPP_D" - register "gpe0_dw2" = "GPP_E" - - # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x000c0201" - - # Enable "Intel Speed Shift Technology" - register "speed_shift_enable" = "1" - - # Enable DPTF - register "dptf_enable" = "1" - - # FSP Configuration - register "ProbelessTrace" = "0" - register "EnableLan" = "0" - register "EnableSata" = "0" - register "SataSalpSupport" = "0" - register "SataMode" = "0" - register "SataPortsEnable[0]" = "0" - register "EnableAzalia" = "1" - register "DspEnable" = "1" - register "IoBufferOwnership" = "3" - register "EnableTraceHub" = "0" - register "SsicPortEnable" = "0" - register "SmbusEnable" = "1" - register "Cio2Enable" = "0" - register "ScsEmmcEnabled" = "1" - register "ScsEmmcHs400Enabled" = "1" - register "ScsSdCardEnabled" = "0" - register "PttSwitch" = "0" - register "SkipExtGfxScan" = "1" - register "Device4Enable" = "1" - register "HeciEnabled" = "0" - register "SaGv" = "3" - register "PmConfigSlpS3MinAssert" = "2" # 50ms - register "PmConfigSlpS4MinAssert" = "1" # 1s - register "PmConfigSlpSusMinAssert" = "1" # 500ms - register "PmConfigSlpAMinAssert" = "3" # 2s - register "PmTimerDisabled" = "1" - - register "pirqa_routing" = "PCH_IRQ11" - register "pirqb_routing" = "PCH_IRQ10" - register "pirqc_routing" = "PCH_IRQ11" - register "pirqd_routing" = "PCH_IRQ11" - register "pirqe_routing" = "PCH_IRQ11" - register "pirqf_routing" = "PCH_IRQ11" - register "pirqg_routing" = "PCH_IRQ11" - register "pirqh_routing" = "PCH_IRQ11" - - # Enable Root port 1 - register "PcieRpEnable[0]" = "1" - # Enable CLKREQ# - register "PcieRpClkReqSupport[0]" = "1" - # RP 1 uses SRCCLKREQ1# - register "PcieRpClkReqNumber[0]" = "1" - - register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-C Port 2 - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # SD - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port 2 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD - - - # Must leave UART0 enabled or SD/eMMC will not work as PCI - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, - [PchSerialIoIndexI2C1] = PchSerialIoPci, - [PchSerialIoIndexI2C2] = PchSerialIoDisabled, - [PchSerialIoIndexI2C3] = PchSerialIoDisabled, - [PchSerialIoIndexI2C4] = PchSerialIoPci, - [PchSerialIoIndexI2C5] = PchSerialIoDisabled, - [PchSerialIoIndexSpi0] = PchSerialIoDisabled, - [PchSerialIoIndexSpi1] = PchSerialIoDisabled, - [PchSerialIoIndexUart0] = PchSerialIoPci, - [PchSerialIoIndexUart1] = PchSerialIoDisabled, - [PchSerialIoIndexUart2] = PchSerialIoSkipInit, - }" - - # I2C4 is 1.8V - register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - - # PL2 override 15W - register "tdp_pl2_override" = "15" - - # Send an extra VR mailbox command for the supported MPS IMVP8 model - register "SendVrMbxCmd" = "1" - - # TCC of 90C - register "tcc_offset" = "10" - - # Lock Down - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - }" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 14.0 on end # USB xHCI - device pci 14.1 off end # USB xDCI (OTG) - device pci 14.2 on end # Thermal Subsystem - device pci 15.0 on end # I2C #0 - device pci 15.1 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" - register "wake" = "GPE0_DW0_05" - device i2c 15 on end - end - end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 17.0 off end # SATA - device pci 19.0 on end # UART #2 - device pci 19.1 off end # I2C #5 - device pci 19.2 on - chip drivers/i2c/nau8825 - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" - register "jkdet_enable" = "1" - register "jkdet_pull_enable" = "0" # R389 - register "jkdet_polarity" = "1" # ActiveLow - register "vref_impedance" = "2" # 125kOhm - register "micbias_voltage" = "6" # 2.754 - register "sar_threshold_num" = "4" - register "sar_threshold[0]" = "0x0c" - register "sar_threshold[1]" = "0x1c" - register "sar_threshold[2]" = "0x38" - register "sar_threshold[3]" = "0x60" - register "sar_hysteresis" = "1" - register "sar_voltage" = "0" # VDDA - register "sar_compare_time" = "0" # 500ns - register "sar_sampling_time" = "0" # 2us - register "short_key_debounce" = "2" # 100ms - register "jack_insert_debounce" = "7" # 512ms - register "jack_eject_debounce" = "7" # 512ms - device i2c 1a on end - end - chip drivers/i2c/generic - register "hid" = ""INT343B"" - register "desc" = ""SSM4567 Left Speaker Amp"" - register "uid" = "0" - device i2c 34 on end - end - chip drivers/i2c/generic - register "hid" = ""INT343B"" - register "desc" = ""SSM4567 Right Speaker Amp"" - register "uid" = "1" - device i2c 35 on end - end - end # I2C #4 - device pci 1c.0 on - chip drivers/intel/wifi - register "wake" = "GPE0_DW0_16" - device pci 00.0 on end - end - end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 off end # PCI Express Port 9 - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1e.0 on end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - device pci 1e.4 on end # eMMC - device pci 1e.5 off end # SDIO - device pci 1e.6 off end # SDCard - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Interface - device pci 1f.1 on end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on end # Intel HDA - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end diff --git a/src/mainboard/google/glados/variants/chell/overridetree.cb b/src/mainboard/google/glados/variants/chell/overridetree.cb new file mode 100644 index 0000000..c6ccd20 --- /dev/null +++ b/src/mainboard/google/glados/variants/chell/overridetree.cb @@ -0,0 +1,73 @@ +chip soc/intel/skylake + + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + + register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1 + register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-C Port 2 + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # SD + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port 2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD + + # PL2 override 15W + register "tdp_pl2_override" = "15" + + # Send an extra VR mailbox command for the supported MPS IMVP8 model + register "SendVrMbxCmd" = "1" + + # TCC of 90C + register "tcc_offset" = "10" + + device domain 0 on + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_05" + device i2c 15 on end + end + end # I2C #1 + device pci 19.2 on + chip drivers/i2c/nau8825 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "0" # R389 + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x0c" + register "sar_threshold[1]" = "0x1c" + register "sar_threshold[2]" = "0x38" + register "sar_threshold[3]" = "0x60" + register "sar_hysteresis" = "1" + register "sar_voltage" = "0" # VDDA + register "sar_compare_time" = "0" # 500ns + register "sar_sampling_time" = "0" # 2us + register "short_key_debounce" = "2" # 100ms + register "jack_insert_debounce" = "7" # 512ms + register "jack_eject_debounce" = "7" # 512ms + device i2c 1a on end + end + chip drivers/i2c/generic + register "hid" = ""INT343B"" + register "desc" = ""SSM4567 Left Speaker Amp"" + register "uid" = "0" + device i2c 34 on end + end + chip drivers/i2c/generic + register "hid" = ""INT343B"" + register "desc" = ""SSM4567 Right Speaker Amp"" + register "uid" = "1" + device i2c 35 on end + end + end # I2C #4 + end +end diff --git a/src/mainboard/google/glados/variants/glados/devicetree.cb b/src/mainboard/google/glados/variants/glados/devicetree.cb deleted file mode 100644 index 9cd5ac9..0000000 --- a/src/mainboard/google/glados/variants/glados/devicetree.cb +++ /dev/null @@ -1,234 +0,0 @@ -chip soc/intel/skylake - - register "gpu_pp_up_delay_ms" = "200" - register "gpu_pp_down_delay_ms" = " 50" - register "gpu_pp_cycle_delay_ms" = "500" - register "gpu_pp_backlight_on_delay_ms" = " 1" - register "gpu_pp_backlight_off_delay_ms" = "200" - - register "gpu_pch_backlight_pwm_hz" = "1000" - - # Enable deep Sx states - register "deep_s3_enable_ac" = "0" - register "deep_s3_enable_dc" = "0" - register "deep_s5_enable_ac" = "1" - register "deep_s5_enable_dc" = "1" - register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - register "gpe0_dw0" = "GPP_B" - register "gpe0_dw1" = "GPP_D" - register "gpe0_dw2" = "GPP_E" - - # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x000c0201" - - # Enable "Intel Speed Shift Technology" - register "speed_shift_enable" = "1" - - # Enable DPTF - register "dptf_enable" = "1" - - # FSP Configuration - register "ProbelessTrace" = "0" - register "EnableLan" = "0" - register "EnableSata" = "0" - register "SataSalpSupport" = "0" - register "SataMode" = "0" - register "SataPortsEnable[0]" = "0" - register "EnableAzalia" = "1" - register "DspEnable" = "1" - register "IoBufferOwnership" = "3" - register "EnableTraceHub" = "0" - register "SsicPortEnable" = "0" - register "SmbusEnable" = "1" - register "Cio2Enable" = "0" - register "ScsEmmcEnabled" = "1" - register "ScsEmmcHs400Enabled" = "1" - register "ScsSdCardEnabled" = "2" - register "PttSwitch" = "0" - register "SkipExtGfxScan" = "1" - register "Device4Enable" = "1" - register "HeciEnabled" = "0" - register "SaGv" = "3" - register "PmConfigSlpS3MinAssert" = "2" # 50ms - register "PmConfigSlpS4MinAssert" = "1" # 1s - register "PmConfigSlpSusMinAssert" = "1" # 500ms - register "PmConfigSlpAMinAssert" = "3" # 2s - register "PmTimerDisabled" = "1" - - register "pirqa_routing" = "PCH_IRQ11" - register "pirqb_routing" = "PCH_IRQ10" - register "pirqc_routing" = "PCH_IRQ11" - register "pirqd_routing" = "PCH_IRQ11" - register "pirqe_routing" = "PCH_IRQ11" - register "pirqf_routing" = "PCH_IRQ11" - register "pirqg_routing" = "PCH_IRQ11" - register "pirqh_routing" = "PCH_IRQ11" - - # Enable Root port 1 - register "PcieRpEnable[0]" = "1" - # Enable CLKREQ# - register "PcieRpClkReqSupport[0]" = "1" - # RP 1 uses SRCCLKREQ1# - register "PcieRpClkReqNumber[0]" = "1" - - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port (board) - register "usb2_ports[1]" = "USB2_PORT_MAX(OC3)" # Type-C Port (flex) - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port 1 - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[8]" = "USB2_PORT_MID(OC1)" # Type-A Port 2 - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port (board) - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port (flex) - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 1 - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 2 - - # Must leave UART0 enabled or SD/eMMC will not work as PCI - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, - [PchSerialIoIndexI2C1] = PchSerialIoPci, - [PchSerialIoIndexI2C2] = PchSerialIoDisabled, - [PchSerialIoIndexI2C3] = PchSerialIoDisabled, - [PchSerialIoIndexI2C4] = PchSerialIoPci, - [PchSerialIoIndexI2C5] = PchSerialIoDisabled, - [PchSerialIoIndexSpi0] = PchSerialIoDisabled, - [PchSerialIoIndexSpi1] = PchSerialIoDisabled, - [PchSerialIoIndexUart0] = PchSerialIoPci, - [PchSerialIoIndexUart1] = PchSerialIoDisabled, - [PchSerialIoIndexUart2] = PchSerialIoSkipInit, - }" - - # I2C4 is 1.8V - register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - - # PL2 override 15W - register "tdp_pl2_override" = "15" - - # Send an extra VR mailbox command for the supported MPS IMVP8 model - register "SendVrMbxCmd" = "1" - - # TCC of 90C - register "tcc_offset" = "10" - - # Lock Down - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - }" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 14.0 on end # USB xHCI - device pci 14.1 off end # USB xDCI (OTG) - device pci 14.2 on end # Thermal Subsystem - device pci 15.0 on - chip drivers/i2c/generic - register "hid" = ""ELAN0001"" - register "desc" = ""ELAN Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" - device i2c 10 on end - end - end # I2C #0 - device pci 15.1 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" - register "wake" = "GPE0_DW0_05" - device i2c 15 on end - end - end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 17.0 off end # SATA - device pci 19.0 on end # UART #2 - device pci 19.1 off end # I2C #5 - device pci 19.2 on - chip drivers/i2c/nau8825 - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" - register "jkdet_enable" = "1" - register "jkdet_pull_enable" = "0" # R389 - register "jkdet_polarity" = "1" # ActiveLow - register "vref_impedance" = "2" # 125kOhm - register "micbias_voltage" = "6" # 2.754 - register "sar_threshold_num" = "4" - register "sar_threshold[0]" = "0x0c" - register "sar_threshold[1]" = "0x1e" - register "sar_threshold[2]" = "0x38" - register "sar_threshold[3]" = "0x60" - register "sar_hysteresis" = "1" - register "sar_voltage" = "0" # VDDA - register "sar_compare_time" = "0" # 500ns - register "sar_sampling_time" = "0" # 2us - register "short_key_debounce" = "2" # 100ms - register "jack_insert_debounce" = "7" # 512ms - register "jack_eject_debounce" = "7" # 512ms - device i2c 1a on end - end - chip drivers/i2c/generic - register "hid" = ""INT343B"" - register "desc" = ""SSM4567 Left Speaker Amp"" - register "uid" = "0" - device i2c 34 on end - end - chip drivers/i2c/generic - register "hid" = ""INT343B"" - register "desc" = ""SSM4567 Right Speaker Amp"" - register "uid" = "1" - device i2c 35 on end - end - end # I2C #4 - device pci 1c.0 on - chip drivers/intel/wifi - register "wake" = "GPE0_DW0_16" - device pci 00.0 on end - end - end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 off end # PCI Express Port 9 - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1e.0 on end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - device pci 1e.4 on end # eMMC - device pci 1e.5 off end # SDIO - device pci 1e.6 on end # SDCard - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Interface - device pci 1f.1 on end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on end # Intel HDA - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end diff --git a/src/mainboard/google/glados/variants/glados/overridetree.cb b/src/mainboard/google/glados/variants/glados/overridetree.cb new file mode 100644 index 0000000..1bc69ab --- /dev/null +++ b/src/mainboard/google/glados/variants/glados/overridetree.cb @@ -0,0 +1,84 @@ +chip soc/intel/skylake + + register "ScsSdCardEnabled" = "2" + + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port (board) + register "usb2_ports[1]" = "USB2_PORT_MAX(OC3)" # Type-C Port (flex) + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port 1 + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[8]" = "USB2_PORT_MID(OC1)" # Type-A Port 2 + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port (board) + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port (flex) + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 1 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 2 + + # PL2 override 15W + register "tdp_pl2_override" = "15" + + # Send an extra VR mailbox command for the supported MPS IMVP8 model + register "SendVrMbxCmd" = "1" + + # TCC of 90C + register "tcc_offset" = "10" + + device domain 0 on + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ELAN0001"" + register "desc" = ""ELAN Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + device i2c 10 on end + end + end # I2C #0 + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_05" + device i2c 15 on end + end + end # I2C #1 + device pci 19.2 on + chip drivers/i2c/nau8825 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "0" # R389 + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x0c" + register "sar_threshold[1]" = "0x1e" + register "sar_threshold[2]" = "0x38" + register "sar_threshold[3]" = "0x60" + register "sar_hysteresis" = "1" + register "sar_voltage" = "0" # VDDA + register "sar_compare_time" = "0" # 500ns + register "sar_sampling_time" = "0" # 2us + register "short_key_debounce" = "2" # 100ms + register "jack_insert_debounce" = "7" # 512ms + register "jack_eject_debounce" = "7" # 512ms + device i2c 1a on end + end + chip drivers/i2c/generic + register "hid" = ""INT343B"" + register "desc" = ""SSM4567 Left Speaker Amp"" + register "uid" = "0" + device i2c 34 on end + end + chip drivers/i2c/generic + register "hid" = ""INT343B"" + register "desc" = ""SSM4567 Right Speaker Amp"" + register "uid" = "1" + device i2c 35 on end + end + end # I2C #4 + device pci 1e.6 on end # SDCard + end +end diff --git a/src/mainboard/google/glados/variants/lars/devicetree.cb b/src/mainboard/google/glados/variants/lars/devicetree.cb deleted file mode 100644 index 35ce9a0..0000000 --- a/src/mainboard/google/glados/variants/lars/devicetree.cb +++ /dev/null @@ -1,227 +0,0 @@ -chip soc/intel/skylake - - register "gpu_pp_up_delay_ms" = "200" - register "gpu_pp_down_delay_ms" = " 50" - register "gpu_pp_cycle_delay_ms" = "500" - register "gpu_pp_backlight_on_delay_ms" = " 1" - register "gpu_pp_backlight_off_delay_ms" = "200" - - register "gpu_pch_backlight_pwm_hz" = "1000" - - # Enable deep Sx states - register "deep_s3_enable_ac" = "0" - register "deep_s3_enable_dc" = "0" - register "deep_s5_enable_ac" = "1" - register "deep_s5_enable_dc" = "1" - register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - register "gpe0_dw0" = "GPP_B" - register "gpe0_dw1" = "GPP_D" - register "gpe0_dw2" = "GPP_E" - - # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x000c0201" - - # Enable "Intel Speed Shift Technology" - register "speed_shift_enable" = "1" - - # Enable DPTF - register "dptf_enable" = "1" - - # FSP Configuration - register "ProbelessTrace" = "0" - register "EnableLan" = "0" - register "EnableSata" = "0" - register "SataSalpSupport" = "0" - register "SataMode" = "0" - register "SataPortsEnable[0]" = "0" - register "EnableAzalia" = "1" - register "DspEnable" = "1" - register "IoBufferOwnership" = "3" - register "EnableTraceHub" = "0" - register "SsicPortEnable" = "0" - register "SmbusEnable" = "1" - register "Cio2Enable" = "0" - register "ScsEmmcEnabled" = "1" - register "ScsEmmcHs400Enabled" = "1" - register "ScsSdCardEnabled" = "0" - register "PttSwitch" = "0" - register "SkipExtGfxScan" = "1" - register "Device4Enable" = "1" - register "HeciEnabled" = "0" - register "SaGv" = "3" - register "PmConfigSlpS3MinAssert" = "2" # 50ms - register "PmConfigSlpS4MinAssert" = "4" # 4s - register "PmConfigSlpSusMinAssert" = "3" # 4s - register "PmConfigSlpAMinAssert" = "3" # 2s - register "PmTimerDisabled" = "1" - - register "pirqa_routing" = "PCH_IRQ11" - register "pirqb_routing" = "PCH_IRQ10" - register "pirqc_routing" = "PCH_IRQ11" - register "pirqd_routing" = "PCH_IRQ11" - register "pirqe_routing" = "PCH_IRQ11" - register "pirqf_routing" = "PCH_IRQ11" - register "pirqg_routing" = "PCH_IRQ11" - register "pirqh_routing" = "PCH_IRQ11" - - # Enable Root port 1 - register "PcieRpEnable[0]" = "1" - # Enable CLKREQ# - register "PcieRpClkReqSupport[0]" = "1" - # RP 1 uses SRCCLKREQ1# - register "PcieRpClkReqNumber[0]" = "1" - - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card) - register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # SD - register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board) - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card) - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) - - # Must leave UART0 enabled or SD/eMMC will not work as PCI - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, - [PchSerialIoIndexI2C1] = PchSerialIoPci, - [PchSerialIoIndexI2C2] = PchSerialIoDisabled, - [PchSerialIoIndexI2C3] = PchSerialIoDisabled, - [PchSerialIoIndexI2C4] = PchSerialIoPci, - [PchSerialIoIndexI2C5] = PchSerialIoDisabled, - [PchSerialIoIndexSpi0] = PchSerialIoDisabled, - [PchSerialIoIndexSpi1] = PchSerialIoDisabled, - [PchSerialIoIndexUart0] = PchSerialIoPci, - [PchSerialIoIndexUart1] = PchSerialIoDisabled, - [PchSerialIoIndexUart2] = PchSerialIoSkipInit, - }" - - # I2C4 is 1.8V - register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - - # PL2 override 25W - register "tdp_pl2_override" = "25" - - # Send an extra VR mailbox command for the PS4 exit issue - register "SendVrMbxCmd" = "2" - - # Lock Down - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - }" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 14.0 on end # USB xHCI - device pci 14.1 off end # USB xDCI (OTG) - device pci 14.2 on end # Thermal Subsystem - device pci 15.0 on - chip drivers/i2c/generic - register "hid" = ""ELAN0001"" - register "desc" = ""ELAN Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" - device i2c 10 on end - end - end # I2C #0 - device pci 15.1 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" - register "wake" = "GPE0_DW0_05" - device i2c 15 on end - end - end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 17.0 off end # SATA - device pci 19.0 on end # UART #2 - device pci 19.1 off end # I2C #5 - device pci 19.2 on - chip drivers/i2c/nau8825 - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" - register "jkdet_enable" = "1" - register "jkdet_pull_enable" = "1" - register "jkdet_pull_up" = "1" - register "jkdet_polarity" = "1" # ActiveLow - register "vref_impedance" = "2" # 125kOhm - register "micbias_voltage" = "6" # 2.754 - register "sar_threshold_num" = "4" - register "sar_threshold[0]" = "0x08" - register "sar_threshold[1]" = "0x12" - register "sar_threshold[2]" = "0x26" - register "sar_threshold[3]" = "0x73" - register "sar_hysteresis" = "0" - register "sar_voltage" = "6" - register "sar_compare_time" = "1" # 1us - register "sar_sampling_time" = "1" # 4us - register "short_key_debounce" = "3" # 30ms - register "jack_insert_debounce" = "7" # 512ms - register "jack_eject_debounce" = "0" - device i2c 1a on end - end - end # I2C #4 - device pci 1c.0 on - chip drivers/intel/wifi - register "wake" = "GPE0_DW0_16" - device pci 00.0 on end - end - end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 off end # PCI Express Port 9 - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1e.0 on end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - device pci 1e.4 on end # eMMC - device pci 1e.5 off end # SDIO - device pci 1e.6 off end # SDCard - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Interface - device pci 1f.1 on end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on - chip drivers/generic/max98357a - register "hid" = ""MX98357A"" - register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)" - register "sdmode_delay" = "5" - device generic 0 on end - end - end # Intel HDA - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end diff --git a/src/mainboard/google/glados/variants/lars/overridetree.cb b/src/mainboard/google/glados/variants/lars/overridetree.cb new file mode 100644 index 0000000..ce32b6b --- /dev/null +++ b/src/mainboard/google/glados/variants/lars/overridetree.cb @@ -0,0 +1,67 @@ +chip soc/intel/skylake + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 + register "usb2_ports[1]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card) + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # SD + register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board) + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card) + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) + + device domain 0 on + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ELAN0001"" + register "desc" = ""ELAN Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + device i2c 10 on end + end + end # I2C #0 + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_05" + device i2c 15 on end + end + end # I2C #1 + device pci 19.2 on + chip drivers/i2c/nau8825 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "1" + register "jkdet_pull_up" = "1" + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x08" + register "sar_threshold[1]" = "0x12" + register "sar_threshold[2]" = "0x26" + register "sar_threshold[3]" = "0x73" + register "sar_hysteresis" = "0" + register "sar_voltage" = "6" + register "sar_compare_time" = "1" # 1us + register "sar_sampling_time" = "1" # 4us + register "short_key_debounce" = "3" # 30ms + register "jack_insert_debounce" = "7" # 512ms + register "jack_eject_debounce" = "0" + device i2c 1a on end + end + end # I2C #4 + device pci 1e.6 off end # SDCard + device pci 1f.3 on + chip drivers/generic/max98357a + register "hid" = ""MX98357A"" + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)" + register "sdmode_delay" = "5" + device generic 0 on end + end + end # Intel HDA + end +end diff --git a/src/mainboard/google/glados/variants/sentry/devicetree.cb b/src/mainboard/google/glados/variants/sentry/devicetree.cb deleted file mode 100644 index 502aad0..0000000 --- a/src/mainboard/google/glados/variants/sentry/devicetree.cb +++ /dev/null @@ -1,249 +0,0 @@ -chip soc/intel/skylake - - register "gpu_pp_up_delay_ms" = "200" - register "gpu_pp_down_delay_ms" = " 50" - register "gpu_pp_cycle_delay_ms" = "500" - register "gpu_pp_backlight_on_delay_ms" = " 1" - register "gpu_pp_backlight_off_delay_ms" = "200" - - register "gpu_pch_backlight_pwm_hz" = "1000" - - # Enable deep Sx states - register "deep_s3_enable_ac" = "0" - register "deep_s3_enable_dc" = "0" - register "deep_s5_enable_ac" = "1" - register "deep_s5_enable_dc" = "1" - register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - register "gpe0_dw0" = "GPP_B" - register "gpe0_dw1" = "GPP_D" - register "gpe0_dw2" = "GPP_E" - - # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x000c0201" - - # Enable "Intel Speed Shift Technology" - register "speed_shift_enable" = "1" - - # Enable DPTF - register "dptf_enable" = "1" - - # FSP Configuration - register "ProbelessTrace" = "0" - register "EnableLan" = "0" - register "EnableSata" = "0" - register "SataSalpSupport" = "0" - register "SataMode" = "0" - register "SataPortsEnable[0]" = "0" - register "EnableAzalia" = "1" - register "DspEnable" = "1" - register "IoBufferOwnership" = "3" - register "EnableTraceHub" = "0" - register "SsicPortEnable" = "0" - register "SmbusEnable" = "1" - register "Cio2Enable" = "0" - register "ScsEmmcEnabled" = "1" - register "ScsEmmcHs400Enabled" = "1" - register "ScsSdCardEnabled" = "2" - register "PttSwitch" = "0" - register "SkipExtGfxScan" = "1" - register "Device4Enable" = "1" - register "HeciEnabled" = "0" - register "SaGv" = "3" - register "PmConfigSlpS3MinAssert" = "2" # 50ms - register "PmConfigSlpS4MinAssert" = "4" # 4s - register "PmConfigSlpSusMinAssert" = "3" # 4s - register "PmConfigSlpAMinAssert" = "3" # 2s - register "PmTimerDisabled" = "1" - - register "pirqa_routing" = "PCH_IRQ11" - register "pirqb_routing" = "PCH_IRQ10" - register "pirqc_routing" = "PCH_IRQ11" - register "pirqd_routing" = "PCH_IRQ11" - register "pirqe_routing" = "PCH_IRQ11" - register "pirqf_routing" = "PCH_IRQ11" - register "pirqg_routing" = "PCH_IRQ11" - register "pirqh_routing" = "PCH_IRQ11" - - # Enable Root port 1 - register "PcieRpEnable[0]" = "1" - # Enable CLKREQ# - register "PcieRpClkReqSupport[0]" = "1" - # RP 1 uses SRCCLKREQ1# - register "PcieRpClkReqNumber[0]" = "1" - - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-C Port 2 - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card) - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board) - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card) - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) - - # Must leave UART0 enabled or SD/eMMC will not work as PCI - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, - [PchSerialIoIndexI2C1] = PchSerialIoPci, - [PchSerialIoIndexI2C2] = PchSerialIoDisabled, - [PchSerialIoIndexI2C3] = PchSerialIoDisabled, - [PchSerialIoIndexI2C4] = PchSerialIoPci, - [PchSerialIoIndexI2C5] = PchSerialIoDisabled, - [PchSerialIoIndexSpi0] = PchSerialIoDisabled, - [PchSerialIoIndexSpi1] = PchSerialIoDisabled, - [PchSerialIoIndexUart0] = PchSerialIoPci, - [PchSerialIoIndexUart1] = PchSerialIoDisabled, - [PchSerialIoIndexUart2] = PchSerialIoSkipInit, - }" - - # I2C0 is 3.3V - register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" - - # I2C4 is 1.8V - register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - - # PL2 override 25W - register "tdp_pl2_override" = "25" - - # Send an extra VR mailbox command for the PS4 exit issue - register "SendVrMbxCmd" = "2" - - # Use default SD card detect GPIO configuration - register "sdcard_cd_gpio_default" = "GPP_A7" - - # Lock Down - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - }" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 14.0 on end # USB xHCI - device pci 14.1 off end # USB xDCI (OTG) - device pci 14.2 on end # Thermal Subsystem - device pci 15.0 on - chip drivers/i2c/generic - register "hid" = ""RAYD0001"" - register "desc" = ""Raydium Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" - device i2c 39 on end - end - end # I2C #0 - device pci 15.1 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" - register "wake" = "GPE0_DW0_05" - device i2c 15 on end - end - end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 17.0 off end # SATA - device pci 19.0 on end # UART #2 - device pci 19.1 off end # I2C #5 - device pci 19.2 on - chip drivers/i2c/nau8825 - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" - register "jkdet_enable" = "1" - register "jkdet_pull_enable" = "1" - register "jkdet_pull_up" = "1" - register "jkdet_polarity" = "1" # ActiveLow - register "vref_impedance" = "2" # 125kOhm - register "micbias_voltage" = "6" # 2.754 - register "sar_threshold_num" = "4" - register "sar_threshold[0]" = "0x08" - register "sar_threshold[1]" = "0x12" - register "sar_threshold[2]" = "0x26" - register "sar_threshold[3]" = "0x73" - register "sar_hysteresis" = "0" - register "sar_voltage" = "6" - register "sar_compare_time" = "1" # 1us - register "sar_sampling_time" = "1" # 4us - register "short_key_debounce" = "3" # 30ms - register "jack_insert_debounce" = "7" # 512ms - register "jack_eject_debounce" = "0" - device i2c 1a on end - end - chip drivers/i2c/generic - register "hid" = ""INT343B"" - register "desc" = ""SSM4567 Left Speaker Amp"" - register "uid" = "0" - register "device_present_gpio" = "GPP_E3" - device i2c 34 on end - end - chip drivers/i2c/generic - register "hid" = ""INT343B"" - register "desc" = ""SSM4567 Right Speaker Amp"" - register "uid" = "1" - register "device_present_gpio" = "GPP_E3" - device i2c 35 on end - end - end # I2C #4 - device pci 1c.0 on - chip drivers/intel/wifi - register "wake" = "GPE0_DW0_16" - device pci 00.0 on end - end - end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 off end # PCI Express Port 9 - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1e.0 on end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - device pci 1e.4 on end # eMMC - device pci 1e.5 off end # SDIO - device pci 1e.6 on end # SDCard - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Interface - device pci 1f.1 on end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on - chip drivers/generic/max98357a - register "hid" = ""MX98357A"" - register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)" - register "device_present_gpio" = "GPP_E3" - register "device_present_gpio_invert" = "1" - register "sdmode_delay" = "5" - device generic 0 on end - end - end # Intel HDA - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end diff --git a/src/mainboard/google/glados/variants/sentry/overridetree.cb b/src/mainboard/google/glados/variants/sentry/overridetree.cb new file mode 100644 index 0000000..08d3dd3 --- /dev/null +++ b/src/mainboard/google/glados/variants/sentry/overridetree.cb @@ -0,0 +1,91 @@ +chip soc/intel/skylake + + register "ScsSdCardEnabled" = "2" + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-C Port 2 + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card) + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board) + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card) + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board) + + # I2C0 is 3.3V + register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" + + # Use default SD card detect GPIO configuration + register "sdcard_cd_gpio_default" = "GPP_A7" + + device domain 0 on + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""RAYD0001"" + register "desc" = ""Raydium Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + device i2c 39 on end + end + end # I2C #0 + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_05" + device i2c 15 on end + end + end # I2C #1 + device pci 19.2 on + chip drivers/i2c/nau8825 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "1" + register "jkdet_pull_up" = "1" + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x08" + register "sar_threshold[1]" = "0x12" + register "sar_threshold[2]" = "0x26" + register "sar_threshold[3]" = "0x73" + register "sar_hysteresis" = "0" + register "sar_voltage" = "6" + register "sar_compare_time" = "1" # 1us + register "sar_sampling_time" = "1" # 4us + register "short_key_debounce" = "3" # 30ms + register "jack_insert_debounce" = "7" # 512ms + register "jack_eject_debounce" = "0" + device i2c 1a on end + end + chip drivers/i2c/generic + register "hid" = ""INT343B"" + register "desc" = ""SSM4567 Left Speaker Amp"" + register "uid" = "0" + register "device_present_gpio" = "GPP_E3" + device i2c 34 on end + end + chip drivers/i2c/generic + register "hid" = ""INT343B"" + register "desc" = ""SSM4567 Right Speaker Amp"" + register "uid" = "1" + register "device_present_gpio" = "GPP_E3" + device i2c 35 on end + end + end # I2C #4 + device pci 1e.6 on end # SDCard + device pci 1f.3 on + chip drivers/generic/max98357a + register "hid" = ""MX98357A"" + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)" + register "device_present_gpio" = "GPP_E3" + register "device_present_gpio_invert" = "1" + register "sdmode_delay" = "5" + device generic 0 on end + end + end # Intel HDA + end +end -- To view, visit https://review.coreboot.org/c/coreboot/+/39983 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I6dd7a4b1ae7f1d3ce9fadb06ea95e021a1c880a5 Gerrit-Change-Number: 39983 Gerrit-PatchSet: 1 Gerrit-Owner: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-MessageType: newchange

2 10

Change in coreboot[master]: mb/google/glados: drop VR config from devicetree
by Matt DeVillier (Code Review) 03 Apr '20

03 Apr '20

Matt DeVillier has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39982 ) Change subject: mb/google/glados: drop VR config from devicetree ...................................................................... mb/google/glados: drop VR config from devicetree Glados variants use the default VR config for a given SKU (SKL-U or SKL-Y), so drop them from the variant devicetrees. Change-Id: I4307f6e19ae6f99d4f5e475b181fd66c5b92f28c Signed-off-by: Matt DeVillier <matt.devillier(a)gmail.com> --- M src/mainboard/google/glados/variants/asuka/devicetree.cb M src/mainboard/google/glados/variants/caroline/devicetree.cb M src/mainboard/google/glados/variants/cave/devicetree.cb M src/mainboard/google/glados/variants/chell/devicetree.cb M src/mainboard/google/glados/variants/glados/devicetree.cb M src/mainboard/google/glados/variants/lars/devicetree.cb M src/mainboard/google/glados/variants/sentry/devicetree.cb 7 files changed, 0 insertions(+), 469 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/82/39982/1 diff --git a/src/mainboard/google/glados/variants/asuka/devicetree.cb b/src/mainboard/google/glados/variants/asuka/devicetree.cb index e1e68ca..395b572 100644 --- a/src/mainboard/google/glados/variants/asuka/devicetree.cb +++ b/src/mainboard/google/glados/variants/asuka/devicetree.cb @@ -70,72 +70,6 @@ register "pirqg_routing" = "PCH_IRQ11" register "pirqh_routing" = "PCH_IRQ11" - # VR Settings Configuration for 4 Domains - #+----------------+-----------+-----------+-------------+----------+ - #| Domain/Setting | SA | IA | GT Unsliced | GT | - #+----------------+-----------+-----------+-------------+----------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 4A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | - #| IccMax | 7A | 34A | 35A | 35A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | - #+----------------+-----------+-----------+-------------+----------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(4), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(7), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(34), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - }" - # Enable Root port 1 register "PcieRpEnable[0]" = "1" # Enable CLKREQ# diff --git a/src/mainboard/google/glados/variants/caroline/devicetree.cb b/src/mainboard/google/glados/variants/caroline/devicetree.cb index 00b29b7..3e733d6 100644 --- a/src/mainboard/google/glados/variants/caroline/devicetree.cb +++ b/src/mainboard/google/glados/variants/caroline/devicetree.cb @@ -77,72 +77,6 @@ register "SlowSlewRateForSa" = "0" # Fast/2 register "FastPkgCRampDisable" = "0" - # VR Settings Configuration for 4 Domains - #+----------------+-----------+-----------+-------------+----------+ - #| Domain/Setting | SA | IA | GT Unsliced | GT | - #+----------------+-----------+-----------+-------------+----------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 4A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | - #| IccMax | 4A | 24A | 24A | 24A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | - #+----------------+-----------+-----------+-------------+----------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(4), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(4), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(24), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(24), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(24), - .voltage_limit = 1520, - }" - # Enable Root port 1 register "PcieRpEnable[0]" = "1" # Enable CLKREQ# diff --git a/src/mainboard/google/glados/variants/cave/devicetree.cb b/src/mainboard/google/glados/variants/cave/devicetree.cb index 41bb82e..ccc2302 100644 --- a/src/mainboard/google/glados/variants/cave/devicetree.cb +++ b/src/mainboard/google/glados/variants/cave/devicetree.cb @@ -70,72 +70,6 @@ register "pirqg_routing" = "PCH_IRQ11" register "pirqh_routing" = "PCH_IRQ11" - # VR Settings Configuration for 4 Domains - #+----------------+-----------+-----------+-------------+----------+ - #| Domain/Setting | SA | IA | GT Unsliced | GT | - #+----------------+-----------+-----------+-------------+----------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 4A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | - #| IccMax | 4A | 24A | 24A | 24A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | - #+----------------+-----------+-----------+-------------+----------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(4), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(4), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(24), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(24), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(24), - .voltage_limit = 1520, - }" - # Enable Root port 1 register "PcieRpEnable[0]" = "1" # Enable CLKREQ# diff --git a/src/mainboard/google/glados/variants/chell/devicetree.cb b/src/mainboard/google/glados/variants/chell/devicetree.cb index c0fb07c..bbc74f8 100644 --- a/src/mainboard/google/glados/variants/chell/devicetree.cb +++ b/src/mainboard/google/glados/variants/chell/devicetree.cb @@ -70,72 +70,6 @@ register "pirqg_routing" = "PCH_IRQ11" register "pirqh_routing" = "PCH_IRQ11" - # VR Settings Configuration for 4 Domains - #+----------------+-----------+-----------+-------------+----------+ - #| Domain/Setting | SA | IA | GT Unsliced | GT | - #+----------------+-----------+-----------+-------------+----------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 4A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | - #| IccMax | 4A | 24A | 24A | 24A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | - #+----------------+-----------+-----------+-------------+----------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(4), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(4), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(24), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(24), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(24), - .voltage_limit = 1520, - }" - # Enable Root port 1 register "PcieRpEnable[0]" = "1" # Enable CLKREQ# diff --git a/src/mainboard/google/glados/variants/glados/devicetree.cb b/src/mainboard/google/glados/variants/glados/devicetree.cb index d63d9c1..9cd5ac9 100644 --- a/src/mainboard/google/glados/variants/glados/devicetree.cb +++ b/src/mainboard/google/glados/variants/glados/devicetree.cb @@ -70,72 +70,6 @@ register "pirqg_routing" = "PCH_IRQ11" register "pirqh_routing" = "PCH_IRQ11" - # VR Settings Configuration for 4 Domains - #+----------------+-----------+-----------+-------------+----------+ - #| Domain/Setting | SA | IA | GT Unsliced | GT | - #+----------------+-----------+-----------+-------------+----------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 4A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | - #| IccMax | 7A | 34A | 35A | 35A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | - #+----------------+-----------+-----------+-------------+----------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(4), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(7), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(34), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - }" - # Enable Root port 1 register "PcieRpEnable[0]" = "1" # Enable CLKREQ# diff --git a/src/mainboard/google/glados/variants/lars/devicetree.cb b/src/mainboard/google/glados/variants/lars/devicetree.cb index 419d140..35ce9a0 100644 --- a/src/mainboard/google/glados/variants/lars/devicetree.cb +++ b/src/mainboard/google/glados/variants/lars/devicetree.cb @@ -70,72 +70,6 @@ register "pirqg_routing" = "PCH_IRQ11" register "pirqh_routing" = "PCH_IRQ11" - # VR Settings Configuration for 4 Domains - #+----------------+-----------+-----------+-------------+----------+ - #| Domain/Setting | SA | IA | GT Unsliced | GT | - #+----------------+-----------+-----------+-------------+----------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 4A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | - #| IccMax | 7A | 34A | 35A | 35A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | - #+----------------+-----------+-----------+-------------+----------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(4), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(7), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(34), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - }" - # Enable Root port 1 register "PcieRpEnable[0]" = "1" # Enable CLKREQ# diff --git a/src/mainboard/google/glados/variants/sentry/devicetree.cb b/src/mainboard/google/glados/variants/sentry/devicetree.cb index 57586fb..502aad0 100644 --- a/src/mainboard/google/glados/variants/sentry/devicetree.cb +++ b/src/mainboard/google/glados/variants/sentry/devicetree.cb @@ -70,72 +70,6 @@ register "pirqg_routing" = "PCH_IRQ11" register "pirqh_routing" = "PCH_IRQ11" - # VR Settings Configuration for 4 Domains - #+----------------+-----------+-----------+-------------+----------+ - #| Domain/Setting | SA | IA | GT Unsliced | GT | - #+----------------+-----------+-----------+-------------+----------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 4A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | - #| IccMax | 7A | 34A | 35A | 35A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | - #+----------------+-----------+-----------+-------------+----------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(4), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(7), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(34), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - }" - # Enable Root port 1 register "PcieRpEnable[0]" = "1" # Enable CLKREQ# @@ -143,13 +77,6 @@ # RP 1 uses SRCCLKREQ1# register "PcieRpClkReqNumber[0]" = "1" - # Enable Root port 5 - register "PcieRpEnable[4]" = "1" - # Enable CLKREQ# - register "PcieRpClkReqSupport[4]" = "1" - # RP 5 uses SRCCLKREQ2# - register "PcieRpClkReqNumber[4]" = "2" - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1 register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-C Port 2 register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth -- To view, visit https://review.coreboot.org/c/coreboot/+/39982 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4307f6e19ae6f99d4f5e475b181fd66c5b92f28c Gerrit-Change-Number: 39982 Gerrit-PatchSet: 1 Gerrit-Owner: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-MessageType: newchange

3 12

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit April 2020