coreboot-gerrit March 2020

coreboot-gerrit@coreboot.org

1 participants
3325 discussions

Change in libgfxinit[master]: gma bxt panel: Correct power-cycle delay programming
by Nico Huber (Code Review) 05 Mar '20

05 Mar '20

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/libgfxinit/+/38264 ) Change subject: gma bxt panel: Correct power-cycle delay programming ...................................................................... gma bxt panel: Correct power-cycle delay programming Change-Id: Iff53ef5730691c3be1ebcda71428e2bfe9ae16fd Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M common/hw-gfx-gma-config.ads.template M common/hw-gfx-gma-panel.adb 2 files changed, 27 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/libgfxinit refs/changes/64/38264/1 diff --git a/common/hw-gfx-gma-config.ads.template b/common/hw-gfx-gma-config.ads.template index 83dd6a6..01a67c1 100644 --- a/common/hw-gfx-gma-config.ads.template +++ b/common/hw-gfx-gma-config.ads.template @@ -181,6 +181,7 @@ Has_PP_Port_Select : <genbool> := Up_To_Ironlake; Use_PP_VDD_Override : <genbool> := Up_To_Ironlake; Has_PCH_Panel_Power : <genbool> := Ironlake_On; + Has_PP_Divisor_Reg : <genbool> := not Gen_Broxton; ----------- PCH/FDI: --------- Has_PCH : <genbool> := not Gen_Broxton and not Gen_G45; diff --git a/common/hw-gfx-gma-panel.adb b/common/hw-gfx-gma-panel.adb index 359f580..c53fd3f 100644 --- a/common/hw-gfx-gma-panel.adb +++ b/common/hw-gfx-gma-panel.adb @@ -76,6 +76,13 @@ PCH_PP_CONTROL_POWER_DOWN_ON_RESET : constant := 16#00_0001# * 2 ** 1; PCH_PP_CONTROL_TARGET_ON : constant := 16#00_0001# * 2 ** 0; + BXT_PP_CONTROL_PWR_CYC_DELAY_SHIFT : constant := 4; + BXT_PP_CONTROL_PWR_CYC_DELAY_MASK : constant := 16#00_001f# * 2 ** 4; + function BXT_PP_CONTROL_PWR_CYC_DELAY (US : Natural) return Word32 is + begin + return Shift_Left (Div_Round_Up32 (US, 100_000) + 1, BXT_PP_CONTROL_PWR_CYC_DELAY_SHIFT); + end BXT_PP_CONTROL_PWR_CYC_DELAY; + PCH_PP_ON_DELAYS_PORT_SELECT_MASK : constant := 16#00_0003# * 2 ** 30; PCH_PP_ON_DELAYS_PORT_SELECT_LVDS : constant := 16#00_0000# * 2 ** 30; PCH_PP_ON_DELAYS_PORT_SELECT_DP_A : constant := 16#00_0001# * 2 ** 30; @@ -206,7 +213,12 @@ Delays_US (BL_Off_To_Power_Down) := 100 * Natural (Power_Delay and PCH_PP_OFF_DELAYS_BL_OFF_PWR_DOWN_MASK); - Registers.Read (Panel_PP_Regs.DIVISOR, Power_Delay); + if Config.Has_PP_Divisor_Reg then + Registers.Read (Panel_PP_Regs.DIVISOR, Power_Delay); + else + Registers.Read (Panel_PP_Regs.CONTROL, Power_Delay); + Power_Delay := Shift_Right (Power_Delay, BXT_PP_CONTROL_PWR_CYC_DELAY_SHIFT); + end if; if (Power_Delay and PCH_PP_DIVISOR_PWR_CYC_DELAY_MASK) > 1 then Delays_US (Power_Cycle_Delay) := 100_000 * (Natural (Power_Delay and PCH_PP_DIVISOR_PWR_CYC_DELAY_MASK) - 1); @@ -247,11 +259,19 @@ PCH_PP_OFF_DELAYS_BL_OFF_PWR_DOWN (Delays_US (BL_Off_To_Power_Down))); - Registers.Unset_And_Set_Mask - (Register => Panel_PP_Regs.DIVISOR, - Mask_Unset => PCH_PP_DIVISOR_PWR_CYC_DELAY_MASK, - Mask_Set => PCH_PP_DIVISOR_PWR_CYC_DELAY - (Delays_US (Power_Cycle_Delay))); + if Config.Has_PP_Divisor_Reg then + Registers.Unset_And_Set_Mask + (Register => Panel_PP_Regs.DIVISOR, + Mask_Unset => PCH_PP_DIVISOR_PWR_CYC_DELAY_MASK, + Mask_Set => PCH_PP_DIVISOR_PWR_CYC_DELAY + (Delays_US (Power_Cycle_Delay))); + else + Registers.Unset_And_Set_Mask + (Register => Panel_PP_Regs.CONTROL, + Mask_Unset => BXT_PP_CONTROL_PWR_CYC_DELAY_MASK, + Mask_Set => BXT_PP_CONTROL_PWR_CYC_DELAY + (Delays_US (Power_Cycle_Delay))); + end if; end if; if Config.Has_PP_Write_Protection then -- To view, visit https://review.coreboot.org/c/libgfxinit/+/38264 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: libgfxinit Gerrit-Branch: master Gerrit-Change-Id: Iff53ef5730691c3be1ebcda71428e2bfe9ae16fd Gerrit-Change-Number: 38264 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

2 10

Change in libgfxinit[master]: gma bxt: Add panel power and backlight register definitions
by Nico Huber (Code Review) 05 Mar '20

05 Mar '20

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/libgfxinit/+/38263 ) Change subject: gma bxt: Add panel power and backlight register definitions ...................................................................... gma bxt: Add panel power and backlight register definitions Change-Id: I71684b361af421dd7962431cf3eebe2b2769028e Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M common/hw-gfx-gma-registers.ads 1 file changed, 25 insertions(+), 7 deletions(-) git pull ssh://review.coreboot.org:29418/libgfxinit refs/changes/63/38263/1 diff --git a/common/hw-gfx-gma-registers.ads b/common/hw-gfx-gma-registers.ads index 767284c..68e5664 100644 --- a/common/hw-gfx-gma-registers.ads +++ b/common/hw-gfx-gma-registers.ads @@ -614,8 +614,16 @@ PCH_PP_ON_DELAYS, PCH_PP_OFF_DELAYS, PCH_PP_DIVISOR, + BXT_PP_STATUS_2, + BXT_PP_CONTROL_2, + BXT_PP_ON_DELAYS_2, + BXT_PP_OFF_DELAYS_2, BLC_PWM_PCH_CTL1, BLC_PWM_PCH_CTL2, + BXT_BLC_PWM_DUTY_1, + BXT_BLC_PWM_CTL_2, + BXT_BLC_PWM_FREQ_2, + BXT_BLC_PWM_DUTY_2, TRANS_HTOTAL_A, TRANS_HBLANK_A, TRANS_HSYNC_A, @@ -1428,13 +1436,23 @@ GMCH_PP_OFF_DELAYS => 16#06_120c# / Register_Width, GMCH_PP_DIVISOR => 16#06_1210# / Register_Width, GMCH_PFIT_CONTROL => 16#06_1230# / Register_Width, - PCH_PP_STATUS => 16#0c_7200# / Register_Width, - PCH_PP_CONTROL => 16#0c_7204# / Register_Width, - PCH_PP_ON_DELAYS => 16#0c_7208# / Register_Width, - PCH_PP_OFF_DELAYS => 16#0c_720c# / Register_Width, + PCH_PP_STATUS => 16#0c_7200# / Register_Width, -- aliased with BXT_PP_STATUS_1 + PCH_PP_CONTROL => 16#0c_7204# / Register_Width, -- aliased with BXT_PP_CONTROL_1 + PCH_PP_ON_DELAYS => 16#0c_7208# / Register_Width, -- aliased with BXT_PP_ON_DELAYS_1 + PCH_PP_OFF_DELAYS => 16#0c_720c# / Register_Width, -- aliased with BXT_PP_OFF_DELAYS_1 PCH_PP_DIVISOR => 16#0c_7210# / Register_Width, + BXT_PP_STATUS_2 => 16#0c_7300# / Register_Width, + BXT_PP_CONTROL_2 => 16#0c_7304# / Register_Width, + BXT_PP_ON_DELAYS_2 => 16#0c_7308# / Register_Width, + BXT_PP_OFF_DELAYS_2 => 16#0c_730c# / Register_Width, BLC_PWM_CPU_CTL => 16#04_8254# / Register_Width, - BLC_PWM_PCH_CTL2 => 16#0c_8254# / Register_Width, + BLC_PWM_CPU_CTL2 => 16#04_8250# / Register_Width, + BLC_PWM_PCH_CTL1 => 16#0c_8250# / Register_Width, -- aliased with BXT_BLC_PWM_CTL_1 + BLC_PWM_PCH_CTL2 => 16#0c_8254# / Register_Width, -- aliased with BXT_BLC_PWM_FREQ_1 + BXT_BLC_PWM_DUTY_1 => 16#0c_8258# / Register_Width, + BXT_BLC_PWM_CTL_2 => 16#0c_8350# / Register_Width, + BXT_BLC_PWM_FREQ_2 => 16#0c_8354# / Register_Width, + BXT_BLC_PWM_DUTY_2 => 16#0c_8358# / Register_Width, -- GMCH LVDS Connector Registers GMCH_LVDS => 16#06_1180# / Register_Width, @@ -1472,8 +1490,6 @@ DBUF_CTL => 16#04_5008# / Register_Width, NDE_RSTWRN_OPT => 16#04_6408# / Register_Width, PCH_DREF_CONTROL => 16#0c_6200# / Register_Width, - BLC_PWM_PCH_CTL1 => 16#0c_8250# / Register_Width, - BLC_PWM_CPU_CTL2 => 16#04_8250# / Register_Width, PCH_DPLL_SEL => 16#0c_7000# / Register_Width, GT_MAILBOX => 16#13_8124# / Register_Width, GT_MAILBOX_DATA => 16#13_8128# / Register_Width, @@ -1655,6 +1671,8 @@ CURACNTR : constant Registers_Index := CUR_CTL_A; CURABASE : constant Registers_Index := CUR_BASE_A; CURAPOS : constant Registers_Index := CUR_POS_A; + BXT_BLC_PWM_CTL_1 : constant Registers_Index := BLC_PWM_PCH_CTL1; + BXT_BLC_PWM_FREQ_1 : constant Registers_Index := BLC_PWM_PCH_CTL2; --------------------------------------------------------------------------- -- To view, visit https://review.coreboot.org/c/libgfxinit/+/38263 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: libgfxinit Gerrit-Branch: master Gerrit-Change-Id: I71684b361af421dd7962431cf3eebe2b2769028e Gerrit-Change-Number: 38263 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

2 3

Change in libgfxinit[master]: [WIP] gma panel: Introduce `Panel_Control` type
by Nico Huber (Code Review) 05 Mar '20

05 Mar '20

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/libgfxinit/+/38243 ) Change subject: [WIP] gma panel: Introduce `Panel_Control` type ...................................................................... [WIP] gma panel: Introduce `Panel_Control` type Change-Id: I83864bc86b48f65d9ba43e083b805ca09497cbb0 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M common/g45/hw-gfx-gma-connectors.adb M common/haswell_shared/hw-gfx-gma-connectors.adb M common/hw-gfx-gma-config.ads.template M common/hw-gfx-gma-config_helpers.adb M common/hw-gfx-gma-config_helpers.ads M common/hw-gfx-gma-connector_info.adb M common/hw-gfx-gma-display_probing.adb M common/hw-gfx-gma-panel.adb M common/hw-gfx-gma-panel.ads M common/hw-gfx-gma.adb M common/hw-gfx-gma.ads M common/ironlake/hw-gfx-gma-connectors.adb 12 files changed, 120 insertions(+), 77 deletions(-) git pull ssh://review.coreboot.org:29418/libgfxinit refs/changes/43/38243/1 diff --git a/common/g45/hw-gfx-gma-connectors.adb b/common/g45/hw-gfx-gma-connectors.adb index 5ca7c9b..7486fcc 100644 --- a/common/g45/hw-gfx-gma-connectors.adb +++ b/common/g45/hw-gfx-gma-connectors.adb @@ -29,12 +29,6 @@ procedure Post_Reset_Off is null; procedure Initialize is null; - function Is_Internal (Port_Cfg : Port_Config) return Boolean - is - begin - return Port_Cfg.Port = LVDS; - end Is_Internal; - ---------------------------------------------------------------------------- procedure Pre_On @@ -69,10 +63,8 @@ end if; end if; - if Is_Internal (Port_Cfg) then - Panel.On (Wait => False); - Panel.Backlight_On; - end if; + Panel.On (Port_Cfg.Panel, Wait => False); + Panel.Backlight_On (Port_Cfg.Panel); end Post_On; ---------------------------------------------------------------------------- @@ -82,10 +74,8 @@ begin pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); - if Is_Internal (Port_Cfg) then - Panel.Backlight_Off; - Panel.Off; - end if; + Panel.Backlight_Off (Port_Cfg.Panel); + Panel.Off (Port_Cfg.Panel); end Pre_Off; procedure Post_Off (Port_Cfg : Port_Config) @@ -110,8 +100,10 @@ begin pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); - Panel.Backlight_Off; - Panel.Off; + for P in Active_Panel loop + Panel.Backlight_Off (P); + Panel.Off (P); + end loop; end Pre_All_Off; procedure Post_All_Off diff --git a/common/haswell_shared/hw-gfx-gma-connectors.adb b/common/haswell_shared/hw-gfx-gma-connectors.adb index e4980f1..c1b04ed 100644 --- a/common/haswell_shared/hw-gfx-gma-connectors.adb +++ b/common/haswell_shared/hw-gfx-gma-connectors.adb @@ -60,9 +60,7 @@ if Port_Cfg.Port in Digital_Port then DDI.Post_On (Port_Cfg); - if Port_Cfg.Port = DIGI_A then - Panel.Backlight_On; - end if; + Panel.Backlight_On (Port_Cfg.Panel); Success := True; else Success := False; -- Should not happen @@ -76,10 +74,8 @@ begin pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); - if Port_Cfg.Port = DIGI_A then - Panel.Backlight_Off; - Panel.Off; - end if; + Panel.Backlight_Off (Port_Cfg.Panel); + Panel.Off (Port_Cfg.Panel); end Pre_Off; procedure Post_Off (Port_Cfg : Port_Config) @@ -96,8 +92,10 @@ procedure Pre_All_Off is begin - Panel.Backlight_Off; - Panel.Off; + for P in Active_Panel loop + Panel.Backlight_Off (P); + Panel.Off (P); + end loop; end Pre_All_Off; procedure Post_All_Off diff --git a/common/hw-gfx-gma-config.ads.template b/common/hw-gfx-gma-config.ads.template index 2467440..c6a5d44 100644 --- a/common/hw-gfx-gma-config.ads.template +++ b/common/hw-gfx-gma-config.ads.template @@ -43,7 +43,8 @@ CPU_Var : constant Gen_CPU_Variant := <<CPU_VARIANT>>; - Panel_1_Port : constant Port_Type := <<PANEL_1_PORT>>; + Panel_Ports : constant array (Active_Panel) of Port_Type := + (Panel_1 => <<PANEL_1_PORT>>); Analog_I2C_Port : constant PCH_Port := <<ANALOG_I2C_PORT>>; diff --git a/common/hw-gfx-gma-config_helpers.adb b/common/hw-gfx-gma-config_helpers.adb index 07fa087..74279dc 100644 --- a/common/hw-gfx-gma-config_helpers.adb +++ b/common/hw-gfx-gma-config_helpers.adb @@ -12,7 +12,6 @@ -- GNU General Public License for more details. -- -with HW.GFX.GMA.Config; with HW.GFX.GMA.Connector_Info; with HW.GFX.GMA.DP_Info; with HW.GFX.GMA.Registers; @@ -84,6 +83,17 @@ when DP1 .. DP3 => DP); end To_Display_Type; + function To_Panel (Port : Active_Port_Type) return Panel_Control + is + begin + for P in Active_Panel loop + if Port = Config.Panel_Ports (P) then + return P; + end if; + end loop; + return No_Panel; + end To_Panel; + function Highest_Dotclock (Configs : Pipe_Configs) return Frequency_Type is Max : Frequency_Type := Frequency_Type'First; @@ -171,6 +181,7 @@ (Port => To_GPU_Port (Pipe, Port), PCH_Port => To_PCH_Port (Port), Display => To_Display_Type (Port), + Panel => To_Panel (Port), Mode => Mode, Is_FDI => Config.Is_FDI_Port (Port), FDI => Default_DP, @@ -206,6 +217,7 @@ (Port => GPU_Port'First, PCH_Port => PCH_Port'First, Display => Display_Type'First, + Panel => No_Panel, Mode => Invalid_Mode, Is_FDI => False, FDI => Default_DP, diff --git a/common/hw-gfx-gma-config_helpers.ads b/common/hw-gfx-gma-config_helpers.ads index 9d689c7..b9f1d70 100644 --- a/common/hw-gfx-gma-config_helpers.ads +++ b/common/hw-gfx-gma-config_helpers.ads @@ -13,6 +13,7 @@ -- with HW; +with HW.GFX.GMA.Config; private package HW.GFX.GMA.Config_Helpers is @@ -26,6 +27,8 @@ function To_Display_Type (Port : Active_Port_Type) return Display_Type; + function To_Panel (Port : Active_Port_Type) return Panel_Control; + procedure Fill_Port_Config (Port_Cfg : out Port_Config; Pipe : in Pipe_Index; diff --git a/common/hw-gfx-gma-connector_info.adb b/common/hw-gfx-gma-connector_info.adb index 3ce807e..dcbed2e 100644 --- a/common/hw-gfx-gma-connector_info.adb +++ b/common/hw-gfx-gma-connector_info.adb @@ -38,12 +38,10 @@ pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); if Port_Cfg.Display = DP then - if Port_Cfg.Port = DIGI_A then - if GMA.Config.Use_PP_VDD_Override then - Panel.VDD_Override; - else - Panel.On; - end if; + if GMA.Config.Use_PP_VDD_Override then + Panel.VDD_Override (Port_Cfg.Panel); + else + Panel.On (Port_Cfg.Panel); end if; DP_Info.Read_Caps diff --git a/common/hw-gfx-gma-display_probing.adb b/common/hw-gfx-gma-display_probing.adb index df88492..5aed2e6 100644 --- a/common/hw-gfx-gma-display_probing.adb +++ b/common/hw-gfx-gma-display_probing.adb @@ -118,10 +118,7 @@ Success := Config.Valid_Port (Port); if Success then - if Port in Internal_Port_Type then - Panel.Wait_On; - end if; - Read_EDID (Raw_EDID, Port, Success); + Panel.Wait_On (Config_Helpers.To_Panel (Port)); end if; if Success and then @@ -162,7 +159,7 @@ Max_Pipe : in Pipe_Index := Pipe_Index'Last; Keep_Power : in Boolean := False) is - Probe_Internal : Boolean := False; + Probed_Panels : array (Active_Panel) of Boolean := (others => False); Port_Idx : Port_List_Range := Port_List_Range'First; Success : Boolean; @@ -176,11 +173,14 @@ -- Turn panel on early to probe other ports during the power on delay. for Idx in Port_List_Range loop exit when Ports (Idx) = Disabled; - if Ports (Idx) in Internal_Port_Type then - Panel.On (Wait => False); - Probe_Internal := True; - exit; - end if; + declare + P : constant Panel_Control := Config_Helpers.To_Panel (Ports (Idx)); + begin + if P /= No_Panel then + Panel.On (P, Wait => False); + Probed_Panels (P) := True; + end if; + end; end loop; for Pipe in Pipe_Index range @@ -211,11 +211,13 @@ end if; -- Turn panel power off if probing failed. - if Probe_Internal and not - (Port_Configured (Configs, eDP) or Port_Configured (Configs, LVDS)) - then - Panel.Off; - end if; + for P in Active_Panel loop + if Probed_Panels (P) and not + Port_Configured (Configs, Config.Panel_Ports (P)) + then + Panel.Off (P); + end if; + end loop; end Scan_Ports; procedure Hotplug_Events (Ports : out Port_List) diff --git a/common/hw-gfx-gma-panel.adb b/common/hw-gfx-gma-panel.adb index b40689b..398c4d7 100644 --- a/common/hw-gfx-gma-panel.adb +++ b/common/hw-gfx-gma-panel.adb @@ -218,7 +218,7 @@ if Override_Delays then if Config.Has_PP_Port_Select then Port_Select := - (case Config.Panel_1_Port is + (case Config.Panel_Ports (Panel_1) is when LVDS => PCH_PP_ON_DELAYS_PORT_SELECT_LVDS, when eDP => PCH_PP_ON_DELAYS_PORT_SELECT_DP_A, when DP2 | HDMI2 => PCH_PP_ON_DELAYS_PORT_SELECT_DP_C, @@ -269,21 +269,29 @@ ---------------------------------------------------------------------------- - procedure VDD_Override is + procedure VDD_Override (Panel : Panel_Control) is begin + if Panel = No_Panel then + return; + end if; + pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); -- Yeah, We could do, what we are supposed to do here. But OTOH, we -- are should wait for the full Power Up Delay, which we would have -- to do later again. And just powering on the display seems to work -- too. Also this function vanished on newer hardware. - On; + On (Panel); end VDD_Override; - procedure On (Wait : Boolean := True) + procedure On (Panel : Panel_Control; Wait : Boolean := True) is Was_On : Boolean; begin + if Panel = No_Panel then + return; + end if; + pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); Registers.Is_Set_Mask (Panel_PP_Regs.CONTROL, PCH_PP_CONTROL_TARGET_ON, Was_On); @@ -296,12 +304,16 @@ Power_Up_Timer := Time.US_From_Now (Delays_US (Power_Up_Delay)); end if; if Wait then - Wait_On; + Wait_On (Panel); end if; end On; - procedure Wait_On is + procedure Wait_On (Panel : Panel_Control) is begin + if Panel = No_Panel then + return; + end if; + pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); Time.Delay_Until (Power_Up_Timer); @@ -313,10 +325,14 @@ Registers.Unset_Mask (Panel_PP_Regs.CONTROL, PCH_PP_CONTROL_VDD_OVERRIDE); end Wait_On; - procedure Off + procedure Off (Panel : Panel_Control) is Was_On : Boolean; begin + if Panel = No_Panel then + return; + end if; + pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); Registers.Is_Set_Mask (Panel_PP_Regs.CONTROL, PCH_PP_CONTROL_TARGET_ON, Was_On); @@ -338,8 +354,12 @@ ---------------------------------------------------------------------------- - procedure Backlight_On is + procedure Backlight_On (Panel : Panel_Control) is begin + if Panel = No_Panel then + return; + end if; + pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); Registers.Set_Mask @@ -347,8 +367,12 @@ Mask => PCH_PP_CONTROL_BACKLIGHT_ENABLE); end Backlight_On; - procedure Backlight_Off is + procedure Backlight_Off (Panel : Panel_Control) is begin + if Panel = No_Panel then + return; + end if; + pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); Registers.Unset_Mask @@ -356,8 +380,12 @@ Mask => PCH_PP_CONTROL_BACKLIGHT_ENABLE); end Backlight_Off; - procedure Set_Backlight (Level : Word16) is + procedure Set_Backlight (Panel : Panel_Control; Level : Word16) is begin + if Panel = No_Panel then + return; + end if; + pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); Registers.Unset_And_Set_Mask @@ -366,10 +394,15 @@ Mask_Set => Word32 (Level)); end Set_Backlight; - procedure Get_Max_Backlight (Level : out Word16) + procedure Get_Max_Backlight (Panel : Panel_Control; Level : out Word16) is Reg : Word32; begin + if Panel = No_Panel then + Level := 0; + return; + end if; + pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); Registers.Read (Registers.BLC_PWM_PCH_CTL2, Reg); diff --git a/common/hw-gfx-gma-panel.ads b/common/hw-gfx-gma-panel.ads index b968e29..baf47f7 100644 --- a/common/hw-gfx-gma-panel.ads +++ b/common/hw-gfx-gma-panel.ads @@ -40,22 +40,22 @@ ---------------------------------------------------------------------------- - procedure VDD_Override; + procedure VDD_Override (Panel : Panel_Control); - procedure On (Wait : Boolean := True); + procedure On (Panel : Panel_Control; Wait : Boolean := True); - procedure Wait_On; + procedure Wait_On (Panel : Panel_Control); - procedure Off; + procedure Off (Panel : Panel_Control); ---------------------------------------------------------------------------- - procedure Backlight_On; + procedure Backlight_On (Panel : Panel_Control); - procedure Backlight_Off; + procedure Backlight_Off (Panel : Panel_Control); - procedure Set_Backlight (Level : Word16); + procedure Set_Backlight (Panel : Panel_Control; Level : Word16); - procedure Get_Max_Backlight (Level : out Word16); + procedure Get_Max_Backlight (Panel : Panel_Control; Level : out Word16); end HW.GFX.GMA.Panel; diff --git a/common/hw-gfx-gma.adb b/common/hw-gfx-gma.adb index d0f296e..04caa61 100644 --- a/common/hw-gfx-gma.adb +++ b/common/hw-gfx-gma.adb @@ -179,9 +179,7 @@ ("Enabled port " & Port_Names (Pipe_Cfg.Port))); else Wait_For_HPD (Pipe_Cfg.Port) := True; - if Pipe_Cfg.Port in Internal_Port_Type then - Panel.Off; - end if; + Panel.Off (Config_Helpers.To_Panel (Pipe_Cfg.Port)); end if; end Enable_Output; diff --git a/common/hw-gfx-gma.ads b/common/hw-gfx-gma.ads index fcd8804..d5ab68a 100644 --- a/common/hw-gfx-gma.ads +++ b/common/hw-gfx-gma.ads @@ -253,11 +253,15 @@ subtype PCH_HDMI_Port is PCH_Port range PCH_HDMI_B .. PCH_HDMI_D; subtype PCH_DP_Port is PCH_Port range PCH_DP_B .. PCH_DP_D; + type Panel_Control is (No_Panel, Panel_1); + subtype Active_Panel is Panel_Control range Panel_1 .. Panel_1; + type Port_Config is record Port : GPU_Port; PCH_Port : GMA.PCH_Port; Display : Display_Type; + Panel : Panel_Control; Mode : Mode_Type; Is_FDI : Boolean; FDI : DP_Link; diff --git a/common/ironlake/hw-gfx-gma-connectors.adb b/common/ironlake/hw-gfx-gma-connectors.adb index 21eca97..fd774ff 100644 --- a/common/ironlake/hw-gfx-gma-connectors.adb +++ b/common/ironlake/hw-gfx-gma-connectors.adb @@ -70,7 +70,7 @@ if Port_Cfg.Port = DIGI_A then EDP.Pre_Training; - Panel.On (Wait => True); + Panel.On (Port_Cfg.Panel, Wait => True); EDP.Post_On (Port_Cfg.DP, Success); elsif Port_Cfg.Port in FDI.GPU_FDI_Port then declare @@ -97,8 +97,8 @@ end if; if Success and Is_Internal (Port_Cfg) then - Panel.On (Wait => False); - Panel.Backlight_On; + Panel.On (Port_Cfg.Panel, Wait => False); + Panel.Backlight_On (Port_Cfg.Panel); end if; end Post_On; @@ -110,8 +110,8 @@ pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); if Is_Internal (Port_Cfg) then - Panel.Backlight_Off; - Panel.Off; + Panel.Backlight_Off (Port_Cfg.Panel); + Panel.Off (Port_Cfg.Panel); end if; end Pre_Off; @@ -154,8 +154,10 @@ begin pragma Debug (Debug.Put_Line (GNAT.Source_Info.Enclosing_Entity)); - Panel.Backlight_Off; - Panel.Off; + for P in Active_Panel loop + Panel.Backlight_Off (P); + Panel.Off (P); + end loop; end Pre_All_Off; procedure Post_All_Off -- To view, visit https://review.coreboot.org/c/libgfxinit/+/38243 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: libgfxinit Gerrit-Branch: master Gerrit-Change-Id: I83864bc86b48f65d9ba43e083b805ca09497cbb0 Gerrit-Change-Number: 38243 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

2 8

Change in libgfxinit[master]: gma panel config: Turn `internal display type` into a `panel port`
by Nico Huber (Code Review) 05 Mar '20

05 Mar '20

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/libgfxinit/+/38242 ) Change subject: gma panel config: Turn `internal display type` into a `panel port` ...................................................................... gma panel config: Turn `internal display type` into a `panel port` Instead of querying for the type of the internal display (LVDS vs. DP), make it a choice of the port that has a panel hooked up. As some plat- forms actually have support for two panels, we prepare for that by naming it `Panel_1_Port`. We still need to call into the panel logic, when the respective port is enabled. This will be done in the next commit. Change-Id: Id3c78441857d07fb34274b9abd3ae6ea42909ff6 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M common/Makefile.inc M common/hw-gfx-gma-config.ads.template M common/hw-gfx-gma-panel.adb M configs/broxton M configs/g45 M configs/haswell M configs/ironlake M configs/ironlake_edp M configs/skylake 9 files changed, 17 insertions(+), 16 deletions(-) git pull ssh://review.coreboot.org:29418/libgfxinit refs/changes/42/38242/1 diff --git a/common/Makefile.inc b/common/Makefile.inc index 4cbdaaa..9378f41 100644 --- a/common/Makefile.inc +++ b/common/Makefile.inc @@ -50,7 +50,7 @@ CONFIG_GFX_GMA_GENERATION := $(call strip_quotes,$(CONFIG_GFX_GMA_GENERATION)) CONFIG_GFX_GMA_CPU := $(call strip_quotes,$(CONFIG_GFX_GMA_CPU)) CONFIG_GFX_GMA_CPU_VARIANT := $(call strip_quotes,$(CONFIG_GFX_GMA_CPU_VARIANT)) -CONFIG_GFX_GMA_INTERNAL_PORT := $(call strip_quotes,$(CONFIG_GFX_GMA_INTERNAL_PORT)) +CONFIG_GFX_GMA_PANEL_1_PORT := $(call strip_quotes,$(CONFIG_GFX_GMA_PANEL_1_PORT)) CONFIG_GFX_GMA_ANALOG_I2C_PORT := $(call strip_quotes,$(CONFIG_GFX_GMA_ANALOG_I2C_PORT)) _GEN_NONCONST := $(strip \ @@ -72,7 +72,7 @@ $(hw-gfx-gma-config-ads): $(dir)/hw-gfx-gma-config.ads.template $(cnf) printf " GENERATE $(patsubst /%,%,$(subst $(obj)/,,$@))\n" sed -e's/<<GEN>>/$(CONFIG_GFX_GMA_GENERATION)/' \ - -e's/<<INTERNAL_PORT>>/$(CONFIG_GFX_GMA_INTERNAL_PORT)/' \ + -e's/<<PANEL_1_PORT>>/$(CONFIG_GFX_GMA_PANEL_1_PORT)/' \ -e's/<<ANALOG_I2C_PORT>>/$(CONFIG_GFX_GMA_ANALOG_I2C_PORT)/' \ -e's/<<DEFAULT_MMIO_BASE>>/$(CONFIG_GFX_GMA_DEFAULT_MMIO)/' \ -e'/constant Gen_CPU$_Var$\?/d' \ @@ -90,7 +90,7 @@ sed -e's/<<GEN>>/$(CONFIG_GFX_GMA_GENERATION)/' \ -e's/<<CPU>>/$(CONFIG_GFX_GMA_CPU)/' \ -e's/<<CPU_VARIANT>>/$(CONFIG_GFX_GMA_CPU_VARIANT)/' \ - -e's/<<INTERNAL_PORT>>/$(CONFIG_GFX_GMA_INTERNAL_PORT)/' \ + -e's/<<PANEL_1_PORT>>/$(CONFIG_GFX_GMA_PANEL_1_PORT)/' \ -e's/<<ANALOG_I2C_PORT>>/$(CONFIG_GFX_GMA_ANALOG_I2C_PORT)/' \ -e's/<<DEFAULT_MMIO_BASE>>/$(CONFIG_GFX_GMA_DEFAULT_MMIO)/' \ -e":s$$(printf '\n ')/,$$/{N;s/,\n.*Dyn_CPU$_Var$\?[^,)]*//;ts$$(printf '\n ')P;D;}" \ diff --git a/common/hw-gfx-gma-config.ads.template b/common/hw-gfx-gma-config.ads.template index db03a07..2467440 100644 --- a/common/hw-gfx-gma-config.ads.template +++ b/common/hw-gfx-gma-config.ads.template @@ -43,7 +43,7 @@ CPU_Var : constant Gen_CPU_Variant := <<CPU_VARIANT>>; - Internal_Display : constant Internal_Type := <<INTERNAL_PORT>>; + Panel_1_Port : constant Port_Type := <<PANEL_1_PORT>>; Analog_I2C_Port : constant PCH_Port := <<ANALOG_I2C_PORT>>; @@ -146,7 +146,6 @@ Have_HDMI_Buf_Override : constant Boolean := DDI_HDMI_Buffer_Translation >= 0; Default_MMIO_Base_Set : constant Boolean := Default_MMIO_Base /= 0; - Internal_Is_EDP : constant Boolean := Internal_Display = DP; Have_DVI_I : constant Boolean := Analog_I2C_Port /= PCH_DAC; Has_Presence_Straps : <genbool> := not Gen_Broxton; diff --git a/common/hw-gfx-gma-panel.adb b/common/hw-gfx-gma-panel.adb index 968fbbe..b40689b 100644 --- a/common/hw-gfx-gma-panel.adb +++ b/common/hw-gfx-gma-panel.adb @@ -217,11 +217,13 @@ if Override_Delays then if Config.Has_PP_Port_Select then - if Config.Internal_Is_EDP then - Port_Select := PCH_PP_ON_DELAYS_PORT_SELECT_DP_A; - else - Port_Select := PCH_PP_ON_DELAYS_PORT_SELECT_LVDS; - end if; + Port_Select := + (case Config.Panel_1_Port is + when LVDS => PCH_PP_ON_DELAYS_PORT_SELECT_LVDS, + when eDP => PCH_PP_ON_DELAYS_PORT_SELECT_DP_A, + when DP2 | HDMI2 => PCH_PP_ON_DELAYS_PORT_SELECT_DP_C, + when DP3 | HDMI3 => PCH_PP_ON_DELAYS_PORT_SELECT_DP_D, + when others => 0); else Port_Select := 0; end if; diff --git a/configs/broxton b/configs/broxton index 5006125..35a6f6c 100644 --- a/configs/broxton +++ b/configs/broxton @@ -2,6 +2,6 @@ CONFIG_GFX_GMA_GENERATION = Broxton CONFIG_GFX_GMA_CPU = Broxton CONFIG_GFX_GMA_CPU_VARIANT = Normal # N/A -CONFIG_GFX_GMA_INTERNAL_PORT = DP +CONFIG_GFX_GMA_PANEL_1_PORT = eDP CONFIG_GFX_GMA_ANALOG_I2C_PORT = PCH_DAC # N/A CONFIG_GFX_GMA_DEFAULT_MMIO = 16\#e000_0000\# diff --git a/configs/g45 b/configs/g45 index 44404b9..2f0f679 100644 --- a/configs/g45 +++ b/configs/g45 @@ -1,5 +1,5 @@ CONFIG_GFX_GMA_DYN_CPU = y CONFIG_GFX_GMA_GENERATION = G45 -CONFIG_GFX_GMA_INTERNAL_PORT = LVDS +CONFIG_GFX_GMA_PANEL_1_PORT = LVDS CONFIG_GFX_GMA_ANALOG_I2C_PORT = PCH_DAC CONFIG_GFX_GMA_DEFAULT_MMIO = 16\#e000_0000\# diff --git a/configs/haswell b/configs/haswell index 8adaafc..3924572 100644 --- a/configs/haswell +++ b/configs/haswell @@ -1,5 +1,5 @@ CONFIG_GFX_GMA_DYN_CPU = y CONFIG_GFX_GMA_GENERATION = Haswell -CONFIG_GFX_GMA_INTERNAL_PORT = DP +CONFIG_GFX_GMA_PANEL_1_PORT = eDP CONFIG_GFX_GMA_ANALOG_I2C_PORT = PCH_DAC CONFIG_GFX_GMA_DEFAULT_MMIO = 16\#e000_0000\# diff --git a/configs/ironlake b/configs/ironlake index 20b33a7..494b505 100644 --- a/configs/ironlake +++ b/configs/ironlake @@ -1,5 +1,5 @@ CONFIG_GFX_GMA_DYN_CPU = y CONFIG_GFX_GMA_GENERATION = Ironlake -CONFIG_GFX_GMA_INTERNAL_PORT = LVDS +CONFIG_GFX_GMA_PANEL_1_PORT = LVDS CONFIG_GFX_GMA_ANALOG_I2C_PORT = PCH_DAC CONFIG_GFX_GMA_DEFAULT_MMIO = 16\#e000_0000\# diff --git a/configs/ironlake_edp b/configs/ironlake_edp index 9bc56c3..90804c2 100644 --- a/configs/ironlake_edp +++ b/configs/ironlake_edp @@ -1,5 +1,5 @@ CONFIG_GFX_GMA_DYN_CPU = y CONFIG_GFX_GMA_GENERATION = Ironlake -CONFIG_GFX_GMA_INTERNAL_PORT = DP +CONFIG_GFX_GMA_PANEL_1_PORT = eDP CONFIG_GFX_GMA_ANALOG_I2C_PORT = PCH_DAC CONFIG_GFX_GMA_DEFAULT_MMIO = 16\#e000_0000\# diff --git a/configs/skylake b/configs/skylake index 7ae760a..773e7cf 100644 --- a/configs/skylake +++ b/configs/skylake @@ -1,5 +1,5 @@ CONFIG_GFX_GMA_DYN_CPU = y CONFIG_GFX_GMA_GENERATION = Skylake -CONFIG_GFX_GMA_INTERNAL_PORT = DP +CONFIG_GFX_GMA_PANEL_1_PORT = eDP CONFIG_GFX_GMA_ANALOG_I2C_PORT = PCH_DAC CONFIG_GFX_GMA_DEFAULT_MMIO = 16\#e000_0000\# -- To view, visit https://review.coreboot.org/c/libgfxinit/+/38242 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: libgfxinit Gerrit-Branch: master Gerrit-Change-Id: Id3c78441857d07fb34274b9abd3ae6ea42909ff6 Gerrit-Change-Number: 38242 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

2 5

Change in libgfxinit[master]: gma: Split `Internal` port type into `eDP` & `LVDS`
by Nico Huber (Code Review) 05 Mar '20

05 Mar '20

Hello Alexander Couzens, I'd like you to do a code review. Please visit https://review.coreboot.org/c/libgfxinit/+/38239 to review the following change. Change subject: gma: Split `Internal` port type into `eDP` & `LVDS` ...................................................................... gma: Split `Internal` port type into `eDP` & `LVDS` We used to have a single type `Internal`, in the GMA interface, to represent the port for any internal panel. This seemed suitable as all mainboard targets used the additional panel logic (power se- quencing, backlight) only with either one of the eDP and LVDS ports. However, the hardware allows to combine the panel logic also with other ports. And some of the regular DP ports are even mentioned as alternatives to the dedicated eDP port. As a first step towards supporting such less common combinations, we get rid of the single `Internal` type. All the panel logic still assumes that either the dedicated eDP or the LVDS port is used for an internal display. We introduce `Internal_Port_Type` to represent eDP and LVDS, for this. But it should vanish, once the panel logic is adapted. Change-Id: Iadf3c11bd35d085cf47a961e800b0d96b79f62f5 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M common/broxton/hw-gfx-gma-power_and_clocks.adb M common/g45/hw-gfx-gma-port_detect.adb M common/haswell_shared/hw-gfx-gma-port_detect.adb M common/haswell_shared/hw-gfx-gma-power_and_clocks_haswell.adb M common/hw-gfx-gma-config.ads.template M common/hw-gfx-gma-config_helpers.adb M common/hw-gfx-gma-display_probing.adb M common/hw-gfx-gma-display_probing.ads M common/hw-gfx-gma.adb M common/hw-gfx-gma.ads M common/ironlake/hw-gfx-gma-port_detect.adb M common/ironlake/hw-gfx-gma-power_and_clocks_ironlake.adb M common/skylake/hw-gfx-gma-power_and_clocks_skylake.adb 13 files changed, 78 insertions(+), 77 deletions(-) git pull ssh://review.coreboot.org:29418/libgfxinit refs/changes/39/38239/1 diff --git a/common/broxton/hw-gfx-gma-power_and_clocks.adb b/common/broxton/hw-gfx-gma-power_and_clocks.adb index fe10208..07f0cc7 100644 --- a/common/broxton/hw-gfx-gma-power_and_clocks.adb +++ b/common/broxton/hw-gfx-gma-power_and_clocks.adb @@ -157,9 +157,9 @@ is begin return (case PD is - when DDI_A => Configs (Primary).Port = Internal or - Configs (Secondary).Port = Internal or - Configs (Tertiary).Port = Internal, + when DDI_A => Configs (Primary).Port = eDP or + Configs (Secondary).Port = eDP or + Configs (Tertiary).Port = eDP, when DDI_BC => Configs (Primary).Port = HDMI1 or Configs (Primary).Port = DP1 or Configs (Secondary).Port = HDMI1 or @@ -173,7 +173,7 @@ Configs (Tertiary).Port = HDMI2 or Configs (Tertiary).Port = DP2, when PW2 => (Configs (Primary).Port /= Disabled and - Configs (Primary).Port /= Internal) or + Configs (Primary).Port /= eDP) or Configs (Secondary).Port /= Disabled or Configs (Tertiary).Port /= Disabled); end Need_PD; diff --git a/common/g45/hw-gfx-gma-port_detect.adb b/common/g45/hw-gfx-gma-port_detect.adb index 479b626..45ed2dd 100644 --- a/common/g45/hw-gfx-gma-port_detect.adb +++ b/common/g45/hw-gfx-gma-port_detect.adb @@ -74,7 +74,7 @@ begin Config.Valid_Port (Analog) := True; - Config.Valid_Port (Internal) := Config.Internal_Is_LVDS; + Config.Valid_Port (LVDS) := Config.GMCH_GM45; for HDMI_Port in GMCH_HDMI_Port loop Registers.Is_Set_Mask (Register => GMCH_HDMI (HDMI_Port), diff --git a/common/haswell_shared/hw-gfx-gma-port_detect.adb b/common/haswell_shared/hw-gfx-gma-port_detect.adb index 50c14cd..09136ff 100644 --- a/common/haswell_shared/hw-gfx-gma-port_detect.adb +++ b/common/haswell_shared/hw-gfx-gma-port_detect.adb @@ -87,41 +87,37 @@ Config.Valid_Port (Analog) := not (DDI_A_X4 or DAC_Disabled); end if; - if Config.Internal_Is_EDP then - -- DDI_A - if Config.Has_Presence_Straps then - Registers.Is_Set_Mask - (Register => Registers.DDI_BUF_CTL_A, - Mask => DDI_PORT_DETECTED (DIGI_A), - Result => Internal_Detected); - else - Internal_Detected := True; -- XXX: Linux' i915 contains a fixme. - end if; - if Internal_Detected then - if Config.Has_HOTPLUG_CTL then - Registers.Set_Mask - (Register => Registers.HOTPLUG_CTL, - Mask => HOTPLUG_CTL_DDI_A_HPD_INPUT_ENABLE or - HOTPLUG_CTL_DDI_A_HPD_STATUS); -- clear status - if Config.Has_SHOTPLUG_CTL_A then - -- Have to enable south hotplug too on SoCs. - Registers.Unset_And_Set_Mask - (Register => Registers.SHOTPLUG_CTL, - Mask_Unset => SHOTPLUG_CTL_DETECT_MASK, - Mask_Set => SHOTPLUG_CTL_HPD_INPUT_ENABLE (DIGI_A)); - end if; - else + -- DDI_A + if Config.Has_Presence_Straps then + Registers.Is_Set_Mask + (Register => Registers.DDI_BUF_CTL_A, + Mask => DDI_PORT_DETECTED (DIGI_A), + Result => Internal_Detected); + else + Internal_Detected := True; -- XXX: Linux' i915 contains a fixme. + end if; + if Internal_Detected then + if Config.Has_HOTPLUG_CTL then + Registers.Set_Mask + (Register => Registers.HOTPLUG_CTL, + Mask => HOTPLUG_CTL_DDI_A_HPD_INPUT_ENABLE or + HOTPLUG_CTL_DDI_A_HPD_STATUS); -- clear status + if Config.Has_SHOTPLUG_CTL_A then + -- Have to enable south hotplug too on SoCs. Registers.Unset_And_Set_Mask (Register => Registers.SHOTPLUG_CTL, Mask_Unset => SHOTPLUG_CTL_DETECT_MASK, - Mask_Set => SHOTPLUG_CTL_HPD_INPUT_ENABLE (DIGI_A) or - SHOTPLUG_CTL_HPD_STATUS (DIGI_A)); -- clear + Mask_Set => SHOTPLUG_CTL_HPD_INPUT_ENABLE (DIGI_A)); end if; + else + Registers.Unset_And_Set_Mask + (Register => Registers.SHOTPLUG_CTL, + Mask_Unset => SHOTPLUG_CTL_DETECT_MASK, + Mask_Set => SHOTPLUG_CTL_HPD_INPUT_ENABLE (DIGI_A) or + SHOTPLUG_CTL_HPD_STATUS (DIGI_A)); -- clear end if; - else - Internal_Detected := False; end if; - Config.Valid_Port (Internal) := Internal_Detected; + Config.Valid_Port (eDP) := Internal_Detected; -- DDI_[BCD] for Port in Ext_Digital_Port range diff --git a/common/haswell_shared/hw-gfx-gma-power_and_clocks_haswell.adb b/common/haswell_shared/hw-gfx-gma-power_and_clocks_haswell.adb index 44d9acd..252074e 100644 --- a/common/haswell_shared/hw-gfx-gma-power_and_clocks_haswell.adb +++ b/common/haswell_shared/hw-gfx-gma-power_and_clocks_haswell.adb @@ -203,9 +203,9 @@ begin return (Config.Use_PDW_For_EDP_Scaling and then - (Primary.Port = Internal and Requires_Scaling (Primary))) + (Primary.Port = eDP and Requires_Scaling (Primary))) or - (Primary.Port /= Disabled and Primary.Port /= Internal) + (Primary.Port /= Disabled and Primary.Port /= eDP) or Checked_Configs (Secondary).Port /= Disabled or diff --git a/common/hw-gfx-gma-config.ads.template b/common/hw-gfx-gma-config.ads.template index 0e49943..db03a07 100644 --- a/common/hw-gfx-gma-config.ads.template +++ b/common/hw-gfx-gma-config.ads.template @@ -146,8 +146,6 @@ Have_HDMI_Buf_Override : constant Boolean := DDI_HDMI_Buffer_Translation >= 0; Default_MMIO_Base_Set : constant Boolean := Default_MMIO_Base /= 0; - Has_Internal_Display : constant Boolean := Internal_Display /= None; - Internal_Is_LVDS : constant Boolean := Internal_Display = LVDS; Internal_Is_EDP : constant Boolean := Internal_Display = DP; Have_DVI_I : constant Boolean := Analog_I2C_Port /= PCH_DAC; @@ -265,7 +263,8 @@ type FDI_Per_Port is array (Port_Type) of Boolean; Is_FDI_Port : <hswvar> FDI_Per_Port := (Disabled => False, - Internal => Gen_Ironlake and Internal_Is_LVDS, + eDP => False, + LVDS => Gen_Ironlake, DP1 .. HDMI3 => Gen_Ironlake, Analog => Has_PCH_DAC); diff --git a/common/hw-gfx-gma-config_helpers.adb b/common/hw-gfx-gma-config_helpers.adb index ede140c..07fa087 100644 --- a/common/hw-gfx-gma-config_helpers.adb +++ b/common/hw-gfx-gma-config_helpers.adb @@ -32,13 +32,14 @@ (case Config.Gen is when G45 => -- everything on GMCH (case Port is - when Internal => LVDS, + when LVDS => LVDS, + when eDP => DIGI_A, -- n/a, actually when HDMI1 | DP1 => DIGI_B, when HDMI2 | DP2 => DIGI_C, when HDMI3 | DP3 => DIGI_D, when Analog => VGA), when Ironlake => -- everything but eDP through FDI/PCH - (if Config.Internal_Is_EDP and then Port = Internal then + (if Port = eDP then DIGI_A else (case Pipe is -- FDIs are fixed to the CPU pipe @@ -47,7 +48,8 @@ when Tertiary => DIGI_D)), when others => -- everything but VGA directly on CPU (case Port is - when Internal => DIGI_A, -- LVDS not available + when LVDS => LVDS, -- n/a, actually + when eDP => DIGI_A, when HDMI1 | DP1 => DIGI_B, when HDMI2 | DP2 => DIGI_C, when HDMI3 | DP3 => DIGI_D, @@ -59,7 +61,8 @@ begin return (case Port is - when Internal => PCH_LVDS, -- will be ignored if Internal is DP + when LVDS => PCH_LVDS, + when eDP => PCH_LVDS, -- n/a, actually when Analog => PCH_DAC, when HDMI1 => PCH_HDMI_B, when HDMI2 => PCH_HDMI_C, @@ -74,7 +77,8 @@ begin return Display_Type' (case Port is - when Internal => Config.Internal_Display, + when LVDS => LVDS, + when eDP => DP, when Analog => VGA, when HDMI1 .. HDMI3 => HDMI, when DP1 .. DP3 => DP); diff --git a/common/hw-gfx-gma-display_probing.adb b/common/hw-gfx-gma-display_probing.adb index 0d7cd37..df88492 100644 --- a/common/hw-gfx-gma-display_probing.adb +++ b/common/hw-gfx-gma-display_probing.adb @@ -76,7 +76,7 @@ declare DP_Port : constant GMA.DP_Port := (case Port is - when Internal => DP_A, + when eDP => DP_A, when DP1 => DP_B, when DP2 => DP_C, when DP3 => DP_D, @@ -118,7 +118,7 @@ Success := Config.Valid_Port (Port); if Success then - if Port = Internal then + if Port in Internal_Port_Type then Panel.Wait_On; end if; Read_EDID (Raw_EDID, Port, Success); @@ -176,7 +176,7 @@ -- Turn panel on early to probe other ports during the power on delay. for Idx in Port_List_Range loop exit when Ports (Idx) = Disabled; - if Ports (Idx) = Internal then + if Ports (Idx) in Internal_Port_Type then Panel.On (Wait => False); Probe_Internal := True; exit; @@ -211,7 +211,9 @@ end if; -- Turn panel power off if probing failed. - if Probe_Internal and not Port_Configured (Configs, Internal) then + if Probe_Internal and not + (Port_Configured (Configs, eDP) or Port_Configured (Configs, LVDS)) + then Panel.Off; end if; end Scan_Ports; diff --git a/common/hw-gfx-gma-display_probing.ads b/common/hw-gfx-gma-display_probing.ads index 5e8abe4..5dcdbd4 100644 --- a/common/hw-gfx-gma-display_probing.ads +++ b/common/hw-gfx-gma-display_probing.ads @@ -17,10 +17,10 @@ package HW.GFX.GMA.Display_Probing is - type Port_List_Range is range 0 .. 7; + type Port_List_Range is range 0 .. 8; type Port_List is array (Port_List_Range) of Port_Type; All_Ports : constant Port_List := - (DP1, DP2, DP3, HDMI1, HDMI2, HDMI3, Analog, Internal); + (DP1, DP2, DP3, HDMI1, HDMI2, HDMI3, Analog, LVDS, eDP); procedure Read_EDID (Raw_EDID : out EDID.Raw_EDID_Data; diff --git a/common/hw-gfx-gma.adb b/common/hw-gfx-gma.adb index 0fe360d..d0f296e 100644 --- a/common/hw-gfx-gma.adb +++ b/common/hw-gfx-gma.adb @@ -57,7 +57,8 @@ type Port_Name_Array is array (Port_Type) of Port_Name; Port_Names : constant Port_Name_Array := (Disabled => "Disabled", - Internal => "Internal", + LVDS => "LVDS ", + eDP => "eDP ", DP1 => "DP1 ", DP2 => "DP2 ", DP3 => "DP3 ", @@ -178,7 +179,7 @@ ("Enabled port " & Port_Names (Pipe_Cfg.Port))); else Wait_For_HPD (Pipe_Cfg.Port) := True; - if Pipe_Cfg.Port = Internal then + if Pipe_Cfg.Port in Internal_Port_Type then Panel.Off; end if; end if; @@ -236,7 +237,7 @@ Cur_Config.Mode /= New_Config.Mode or else (Config.Use_PDW_For_EDP_Scaling and then - (Cur_Config.Port = Internal and + (Cur_Config.Port = eDP and Requires_Scaling (Cur_Config) /= Requires_Scaling (New_Config))) or else (Config.Has_GMCH_PFIT_CONTROL and then diff --git a/common/hw-gfx-gma.ads b/common/hw-gfx-gma.ads index bdc4704..fcd8804 100644 --- a/common/hw-gfx-gma.ads +++ b/common/hw-gfx-gma.ads @@ -51,7 +51,8 @@ type Port_Type is (Disabled, - Internal, + LVDS, + eDP, DP1, DP2, DP3, @@ -61,6 +62,7 @@ Analog); subtype Active_Port_Type is Port_Type range Port_Type'Succ (Disabled) .. Port_Type'Last; + subtype Internal_Port_Type is Port_Type range LVDS .. eDP; type Cursor_Mode is (No_Cursor, ARGB_Cursor); type Cursor_Size is (Cursor_64x64, Cursor_128x128, Cursor_256x256); diff --git a/common/ironlake/hw-gfx-gma-port_detect.adb b/common/ironlake/hw-gfx-gma-port_detect.adb index 5af2e84..7efadeb 100644 --- a/common/ironlake/hw-gfx-gma-port_detect.adb +++ b/common/ironlake/hw-gfx-gma-port_detect.adb @@ -55,7 +55,8 @@ procedure Initialize is - Internal_Detected, + LVDS_Detected, + eDP_Detected, HDMI_Detected, DP_Detected : Boolean; @@ -71,23 +72,19 @@ begin Config.Valid_Port (Analog) := True; - case Config.Internal_Display is - when LVDS => - -- PCH_LVDS - Registers.Is_Set_Mask - (Register => Registers.PCH_LVDS, - Mask => PCH_LVDS_PORT_DETECTED, - Result => Internal_Detected); - when DP => - -- eDP - Registers.Is_Set_Mask - (Register => Registers.DP_CTL_A, - Mask => DP_PORT_DETECTED, - Result => Internal_Detected); - when None => - Internal_Detected := False; - end case; - Config.Valid_Port (Internal) := Internal_Detected; + -- PCH_LVDS + Registers.Is_Set_Mask + (Register => Registers.PCH_LVDS, + Mask => PCH_LVDS_PORT_DETECTED, + Result => LVDS_Detected); + Config.Valid_Port (LVDS) := LVDS_Detected; + + -- eDP + Registers.Is_Set_Mask + (Register => Registers.DP_CTL_A, + Mask => DP_PORT_DETECTED, + Result => eDP_Detected); + Config.Valid_Port (eDP) := eDP_Detected; -- PCH_HDMI_[BCD], PCH_DP_[BCD] share hotplug registers for PCH_Port in PCH_HDMI_Port loop diff --git a/common/ironlake/hw-gfx-gma-power_and_clocks_ironlake.adb b/common/ironlake/hw-gfx-gma-power_and_clocks_ironlake.adb index 42aabbd..9bc5544 100644 --- a/common/ironlake/hw-gfx-gma-power_and_clocks_ironlake.adb +++ b/common/ironlake/hw-gfx-gma-power_and_clocks_ironlake.adb @@ -42,7 +42,7 @@ PCH_DREF_CONTROL_120MHZ_SSC_MODULATION_EN); Registers.Posting_Read (Registers.PCH_DREF_CONTROL); Time.U_Delay (1); - if Config.Internal_Is_EDP then -- TODO: check for presence + if Config.Valid_Port (eDP) then -- always use spread spectrum clock for CPU output Registers.Set_Mask (Register => Registers.PCH_DREF_CONTROL, diff --git a/common/skylake/hw-gfx-gma-power_and_clocks_skylake.adb b/common/skylake/hw-gfx-gma-power_and_clocks_skylake.adb index e8087ed..93d8d18 100644 --- a/common/skylake/hw-gfx-gma-power_and_clocks_skylake.adb +++ b/common/skylake/hw-gfx-gma-power_and_clocks_skylake.adb @@ -178,9 +178,9 @@ is begin return (case PD is - when DDI_AE => Configs (Primary).Port = Internal or - Configs (Secondary).Port = Internal or - Configs (Tertiary).Port = Internal, + when DDI_AE => Configs (Primary).Port = eDP or + Configs (Secondary).Port = eDP or + Configs (Tertiary).Port = eDP, when DDI_B => Configs (Primary).Port = HDMI1 or Configs (Primary).Port = DP1 or Configs (Secondary).Port = HDMI1 or @@ -200,7 +200,7 @@ Configs (Tertiary).Port = HDMI3 or Configs (Tertiary).Port = DP3, when PW2 => (Configs (Primary).Port /= Disabled and - Configs (Primary).Port /= Internal) or + Configs (Primary).Port /= eDP) or Configs (Secondary).Port /= Disabled or Configs (Tertiary).Port /= Disabled); end Need_PD; -- To view, visit https://review.coreboot.org/c/libgfxinit/+/38239 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: libgfxinit Gerrit-Branch: master Gerrit-Change-Id: Iadf3c11bd35d085cf47a961e800b0d96b79f62f5 Gerrit-Change-Number: 38239 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-MessageType: newchange

2 7

Change in coreboot[master]: mb/libretrend/lt1000: Add Libretrend LT1000 board support
by Michał Żygowski (Code Review) 05 Mar '20

05 Mar '20

1 0

Change in coreboot[master]: mb/libretrend/lt1000: Add Libretrend LT1000 board support
by Paul Menzel (Code Review) 05 Mar '20

05 Mar '20

Paul Menzel has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/30360 ) Change subject: mb/libretrend/lt1000: Add Libretrend LT1000 board support ...................................................................... Patch Set 14: (3 comments) https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… File Documentation/mainboard/libretrend/lt1000.md: https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… PS13, Line 47: Fastboot > I maybe lack information about: […] Thanks. I suggest to use *Fastboot (MRC cache)* then. https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… PS13, Line 62: - speakers and mic header > Thank you Matt. Thanks, maybe add that it works in GNU/Linux (version). https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… File src/mainboard/libretrend/lt1000/acpi/mainboard.asl: https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 1: /* > IIRC there was a discussion some time ago about correctness of adding power button in ACPI. […] Yes, current FWTS should complain also. See CB:27272 for details. -- To view, visit https://review.coreboot.org/c/coreboot/+/30360 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I32fc8a7d3177ba379d04ad8b87adefcfca2b0fab Gerrit-Change-Number: 30360 Gerrit-PatchSet: 14 Gerrit-Owner: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Angel Pons <th3fanbus(a)gmail.com> Gerrit-CC: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-CC: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-CC: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Comment-Date: Thu, 05 Mar 2020 14:41:46 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Michał Żygowski <michal.zygowski(a)3mdeb.com> Comment-In-Reply-To: Matt DeVillier <matt.devillier(a)gmail.com> Comment-In-Reply-To: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-MessageType: comment

1 0

Change in coreboot[master]: mb/libretrend/lt1000: Add Libretrend LT1000 board support
by Michał Żygowski (Code Review) 05 Mar '20

05 Mar '20

Michał Żygowski has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/30360 ) Change subject: mb/libretrend/lt1000: Add Libretrend LT1000 board support ...................................................................... Patch Set 14: (29 comments) https://review.coreboot.org/c/coreboot/+/30360/13//COMMIT_MSG Commit Message: https://review.coreboot.org/c/coreboot/+/30360/13//COMMIT_MSG@7 PS13, Line 7: src/mainboard/libretrend/lt1000: Initial commit > Please use just `mb/libretrend/lt1000:`, and use a statement by adding a verb in imperative mood. […] Done https://review.coreboot.org/c/coreboot/+/30360/13//COMMIT_MSG@8 PS13, Line 8: > Please add a note, how you created that board. […] Yes it was contracted, but only partially. Upstreaming this is my/3mdeb own initiative. https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… File Documentation/mainboard/libretrend/lt1000.md: https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… PS13, Line 23: Kabylake > Kaby Lake Done https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… PS13, Line 25: *3rdparty/fsp* submodule. > Mark up as code `3rdparty/fsp`. Done https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… PS13, Line 27: microcode > Microcode updates are … Done https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… PS13, Line 28: from the *3rdparty/intel-microcode* submodule. > Mark up as code/monospace. Done https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… PS13, Line 42: , whose datasheet : can be found [here][W25Q64FV] > Just do [datasheet][W25Q64FV]. Done https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… PS13, Line 61: onboard > Capitalize this: "Onboard" Done https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… PS13, Line 67: InfraRed > infrared Done https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/l… PS13, Line 102: Super I/O, EC > Kind of. It is Super I/O with integrated Environmental Controller (EC). […] Removed EC. https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… File src/mainboard/libretrend/lt1000/Kconfig: https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 11: select MAINBOARD_HAS_LPC_TPM : select INTEL_GMA_HAVE_VBT : select MAINBOARD_HAS_LIBGFXINIT > any reason not to alphabetize these? Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… File src/mainboard/libretrend/lt1000/acpi/mainboard.asl: https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 1: /* > IIRC there was a discussion some time ago about correctness of adding power button in ACPI. […] Noticed some board also have LIDs and sleep buttons. Some mainboards do not have power button (physical button) so I wonder if it should be included in common location. https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 21: Name (PBST, One) > Probably nothing. Copy-paste error. Removed. https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… File src/mainboard/libretrend/lt1000/acpi_tables.c: PS13: > Definitely. Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… File src/mainboard/libretrend/lt1000/bootblock.c: https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 38: devictree > devicetree Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 41: devictree > here too Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… File src/mainboard/libretrend/lt1000/devicetree.cb: https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 65: 3 > There's an enum for this Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… File src/mainboard/libretrend/lt1000/dsdt.asl: https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 28: // Some generic macros > This comment got dropped Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 34: // CPU > This comment is not useful Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 37: Scope (\_SB) { : Device (PCI0) > Device (\_SB. […] Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 45: // Chipset specific sleep states > This got dropped as well. Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… File src/mainboard/libretrend/lt1000/mainboard.c: PS13: > this can be dropped/replaced by selection of DRIVERS_GENERIC_CBFS_SERIAL in Kconfig dropped as it is not needed https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 24: {0} > Please add spaces around the 0. File was removed. https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 47: MAX_SERIAL_LENGTH); > Fits in 96 characters. File was removed. https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… File src/mainboard/libretrend/lt1000/ramstage.c: https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 24: * > Remove. […] Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… File src/mainboard/libretrend/lt1000/romstage.c: https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 38: /* DQS CPU<>DRAM map > https://doc.coreboot.org/coding_style. […] Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 50: /* Rcomp resistor */ > Unneeded comment. Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 53: sizeof(RcompResistor)); > One line. Done https://review.coreboot.org/c/coreboot/+/30360/13/src/mainboard/libretrend/… PS13, Line 77: */ > https://doc.coreboot.org/coding_style. […] Done -- To view, visit https://review.coreboot.org/c/coreboot/+/30360 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I32fc8a7d3177ba379d04ad8b87adefcfca2b0fab Gerrit-Change-Number: 30360 Gerrit-PatchSet: 14 Gerrit-Owner: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Angel Pons <th3fanbus(a)gmail.com> Gerrit-CC: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-CC: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-CC: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Comment-Date: Thu, 05 Mar 2020 14:40:40 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Michał Żygowski <michal.zygowski(a)3mdeb.com> Comment-In-Reply-To: Matt DeVillier <matt.devillier(a)gmail.com> Comment-In-Reply-To: Paul Menzel <paulepanter(a)users.sourceforge.net> Comment-In-Reply-To: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: comment

1 0

Change in coreboot[master]: mb/libretrend/lt1000: Add Libretrend LT1000 board support
by Michał Żygowski (Code Review) 05 Mar '20

05 Mar '20

1 0

Change in coreboot[master]: mb/libretrend/lt1000: Add Libretrend LT1000 board support
by Michał Żygowski (Code Review) 05 Mar '20

05 Mar '20

Hello build bot (Jenkins), Martin Roth, Patrick Georgi, Patrick Rudolph, Piotr Król, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/coreboot/+/30360 to look at the new patch set (#14). Change subject: mb/libretrend/lt1000: Add Libretrend LT1000 board support ...................................................................... mb/libretrend/lt1000: Add Libretrend LT1000 board support Change-Id: I32fc8a7d3177ba379d04ad8b87adefcfca2b0fab Signed-off-by: Michał Żygowski <michal.zygowski(a)3mdeb.com> --- M Documentation/mainboard/index.md A Documentation/mainboard/libretrend/lt1000.jpg A Documentation/mainboard/libretrend/lt1000.md M MAINTAINERS A configs/config.libretrend_lt1000 A src/mainboard/libretrend/Kconfig A src/mainboard/libretrend/Kconfig.name A src/mainboard/libretrend/lt1000/Kconfig A src/mainboard/libretrend/lt1000/Kconfig.name A src/mainboard/libretrend/lt1000/Makefile.inc A src/mainboard/libretrend/lt1000/acpi/ec.asl A src/mainboard/libretrend/lt1000/acpi/mainboard.asl A src/mainboard/libretrend/lt1000/acpi/superio.asl A src/mainboard/libretrend/lt1000/board_info.txt A src/mainboard/libretrend/lt1000/bootblock.c A src/mainboard/libretrend/lt1000/data.vbt A src/mainboard/libretrend/lt1000/devicetree.cb A src/mainboard/libretrend/lt1000/dsdt.asl A src/mainboard/libretrend/lt1000/gma-mainboard.ads A src/mainboard/libretrend/lt1000/gpio.h A src/mainboard/libretrend/lt1000/hda_verb.c A src/mainboard/libretrend/lt1000/ramstage.c A src/mainboard/libretrend/lt1000/romstage.c 23 files changed, 960 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/60/30360/14 -- To view, visit https://review.coreboot.org/c/coreboot/+/30360 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I32fc8a7d3177ba379d04ad8b87adefcfca2b0fab Gerrit-Change-Number: 30360 Gerrit-PatchSet: 14 Gerrit-Owner: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Angel Pons <th3fanbus(a)gmail.com> Gerrit-CC: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-CC: Matt DeVillier <matt.devillier(a)gmail.com> Gerrit-CC: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-MessageType: newpatchset

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit March 2020