coreboot-gerrit December 2024

coreboot-gerrit@coreboot.org

1 participants
3018 discussions

[XS] Change in coreboot[main]: mb/google/fatcat/var/fatcat: Change touchpad interrupt to edge trigger
by Subrata Banik (Code Review) 31 Dec '24

31 Dec '24

Subrata Banik has submitted this change. ( https://review.coreboot.org/c/coreboot/+/85802?usp=email ) Change subject: mb/google/fatcat/var/fatcat: Change touchpad interrupt to edge trigger ...................................................................... mb/google/fatcat/var/fatcat: Change touchpad interrupt to edge trigger This change modifies the touchpad interrupt configuration to use edge-triggered interrupts instead of level-triggered interrupts. This is necessary to ensure that the touchpad interrupt is properly detected by the AP w/o seeing interrupt flood. BUG=b:376019577 TEST=Verified that the touchpad works smoothly with this change. Change-Id: Ida0dfe10963a979c5e977133149d97799a76e3b3 Signed-off-by: Subrata Banik <subratabanik(a)google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85802 Reviewed-by: Pranava Y N <pranavayn(a)google.com> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> --- M src/mainboard/google/fatcat/variants/fatcat/fw_config.c 1 file changed, 1 insertion(+), 1 deletion(-) Approvals: build bot (Jenkins): Verified Pranava Y N: Looks good to me, approved diff --git a/src/mainboard/google/fatcat/variants/fatcat/fw_config.c b/src/mainboard/google/fatcat/variants/fatcat/fw_config.c index 6ac0755..87f9097 100644 --- a/src/mainboard/google/fatcat/variants/fatcat/fw_config.c +++ b/src/mainboard/google/fatcat/variants/fatcat/fw_config.c @@ -440,7 +440,7 @@ /* GPP_F13: THC_I2C1_SDA_TCH_PAD */ PAD_CFG_NF(GPP_F13, NONE, DEEP, NF8), /* GPP_A13: TCH_PAD_INT_N */ - PAD_CFG_GPI_IRQ_WAKE(GPP_A13, NONE, PWROK, LEVEL, INVERT), + PAD_CFG_GPI_IRQ_WAKE(GPP_A13, NONE, PWROK, EDGE_SINGLE, INVERT), }; static const struct pad_config touchpad_i2c_disable_pads[] = { -- To view, visit https://review.coreboot.org/c/coreboot/+/85802?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Ida0dfe10963a979c5e977133149d97799a76e3b3 Gerrit-Change-Number: 85802 Gerrit-PatchSet: 2 Gerrit-Owner: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: Pranava Y N <pranavayn(a)google.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org>

1 0

[XS] Change in coreboot[main]: mb/google/nissa/var/rull: Configure Acoustic noise mitigation
by Elyes Haouas (Code Review) 31 Dec '24

31 Dec '24

Elyes Haouas has submitted this change. ( https://review.coreboot.org/c/coreboot/+/85798?usp=email ) Change subject: mb/google/nissa/var/rull: Configure Acoustic noise mitigation ...................................................................... mb/google/nissa/var/rull: Configure Acoustic noise mitigation Follow the power team’s recommendation: - Enable Acoustic noise mitigation - Set slow slew rate VCCIA and VCCGT to SLEW_FAST_8 - Set FastPkgCRampDisable VCCIA and VCCGT to "true" BUG=b:380384127 TEST=built firmware and verified by power team, and noise pass Change-Id: Ib7f60f1248c6b46f4f9bac1731be4f0396766ae2 Signed-off-by: Rui Zhou <zhourui(a)huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85798 Reviewed-by: Elyes Haouas <ehaouas(a)noos.fr> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Subrata Banik <subratabanik(a)google.com> Reviewed-by: Eric Lai <ericllai(a)google.com> --- M src/mainboard/google/brya/variants/rull/overridetree.cb 1 file changed, 7 insertions(+), 0 deletions(-) Approvals: Subrata Banik: Looks good to me, approved Eric Lai: Looks good to me, approved build bot (Jenkins): Verified Elyes Haouas: Looks good to me, approved diff --git a/src/mainboard/google/brya/variants/rull/overridetree.cb b/src/mainboard/google/brya/variants/rull/overridetree.cb index b11c25d..3c04da5 100644 --- a/src/mainboard/google/brya/variants/rull/overridetree.cb +++ b/src/mainboard/google/brya/variants/rull/overridetree.cb @@ -12,6 +12,13 @@ end chip soc/intel/alderlake + # Acoustic settings + register "acoustic_noise_mitigation" = "1" + register "slow_slew_rate[VR_DOMAIN_IA]" = "SLEW_FAST_8" + register "slow_slew_rate[VR_DOMAIN_GT]" = "SLEW_FAST_8" + register "fast_pkg_c_ramp_disable[VR_DOMAIN_IA]" = "true" + register "fast_pkg_c_ramp_disable[VR_DOMAIN_GT]" = "true" + register "sagv" = "SaGv_Enabled" # EMMC Tx CMD Delay -- To view, visit https://review.coreboot.org/c/coreboot/+/85798?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Ib7f60f1248c6b46f4f9bac1731be4f0396766ae2 Gerrit-Change-Number: 85798 Gerrit-PatchSet: 3 Gerrit-Owner: Rui Zhou <zhourui(a)huaqin.corp-partner.google.com> Gerrit-Reviewer: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Reviewer: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Reviewer: Eric Lai <ericllai(a)google.com> Gerrit-Reviewer: Jayvik Desai <jayvik(a)google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Kun Liu <liukun11(a)huaqin.corp-partner.google.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org>

1 0

[S] Change in blobs[main]: soc/mediatek/mt8196: Add GPUEB firmware v1.0
by Jarried Lin (Code Review) 31 Dec '24

31 Dec '24

Attention is currently required from: Andy Hsu, Yidi Lin, Yu-Ping Wu. Jarried Lin has posted comments on this change by Jarried Lin. ( https://review.coreboot.org/c/blobs/+/85763?usp=email ) Change subject: soc/mediatek/mt8196: Add GPUEB firmware v1.0 ...................................................................... Patch Set 4: (4 comments) File soc/mediatek/mt8196/README.md: https://review.coreboot.org/c/blobs/+/85763/comment/be17e14e_4b9f71ef?usp=e… : PS1, Line 203: `tinysys-gpueb-RV33_A.mkpt_fw.img` to the SRAM of GPUEB. > move to the next line Done https://review.coreboot.org/c/blobs/+/85763/comment/7fdcd54d_2645d8b1?usp=e… : PS1, Line 203: . It will copy `tinysys-gpueb-RV33_A.mkpt_fw.img` to the SRAM of GPUEB. > `, parse it, and copy the resulting image to the SRAM of GPUEB` Done https://review.coreboot.org/c/blobs/+/85763/comment/b7cb12b2_5968a4a0?usp=e… : PS1, Line 207: reset to trigger GPUEB. > move to the next line Done File soc/mediatek/mt8196/tinysys-gpueb-RV33_A.mkpt_fw.img: PS1: > Can we have a shorter file name please (such as `gpueb. […] Done -- To view, visit https://review.coreboot.org/c/blobs/+/85763?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: blobs Gerrit-Branch: main Gerrit-Change-Id: I470f1575beea481cac2dcb5f3eb77587739ff2dc Gerrit-Change-Number: 85763 Gerrit-PatchSet: 4 Gerrit-Owner: Jarried Lin <jarried.lin(a)mediatek.com> Gerrit-Reviewer: Andy Hsu <andy.hsu(a)mediatek.corp-partner.google.com> Gerrit-Reviewer: Yidi Lin <yidilin(a)google.com> Gerrit-Reviewer: Yu-Ping Wu <yupingso(a)google.com> Gerrit-Attention: Andy Hsu <andy.hsu(a)mediatek.corp-partner.google.com> Gerrit-Attention: Yu-Ping Wu <yupingso(a)google.com> Gerrit-Attention: Yidi Lin <yidilin(a)google.com> Gerrit-Comment-Date: Tue, 31 Dec 2024 02:43:25 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Yidi Lin <yidilin(a)google.com> Comment-In-Reply-To: Yu-Ping Wu <yupingso(a)google.com>

1 0

[L] Change in coreboot[main]: tree: Use "true", "false" for has_power_resource
by Elyes Haouas (Code Review) 31 Dec '24

31 Dec '24

Elyes Haouas has submitted this change. ( https://review.coreboot.org/c/coreboot/+/85813?usp=email ) Change subject: tree: Use "true", "false" for has_power_resource ...................................................................... tree: Use "true", "false" for has_power_resource has_power_resource is a boolean, so use true, false instead of 0, 1. Change-Id: I25b86ef577e072cfe3ef5dc2447113f11c51f747 Signed-off-by: Elyes Haouas <ehaouas(a)noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85813 Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Eric Lai <ericllai(a)google.com> --- M src/mainboard/google/brox/variants/brox/overridetree.cb M src/mainboard/google/brox/variants/greenbayupoc/overridetree.cb M src/mainboard/google/brox/variants/jubilant/overridetree.cb M src/mainboard/google/brox/variants/lotso/overridetree.cb M src/mainboard/google/brya/variants/anahera/overridetree.cb M src/mainboard/google/brya/variants/anahera4es/overridetree.cb M src/mainboard/google/brya/variants/anraggar/overridetree.cb M src/mainboard/google/brya/variants/brask/overridetree.cb M src/mainboard/google/brya/variants/brya0/overridetree.cb M src/mainboard/google/brya/variants/craask/overridetree.cb M src/mainboard/google/brya/variants/crota/overridetree.cb M src/mainboard/google/brya/variants/dochi/overridetree.cb M src/mainboard/google/brya/variants/gaelin/overridetree.cb M src/mainboard/google/brya/variants/gimble/overridetree.cb M src/mainboard/google/brya/variants/gimble4es/overridetree.cb M src/mainboard/google/brya/variants/glassway/overridetree.cb M src/mainboard/google/brya/variants/gothrax/overridetree.cb M src/mainboard/google/brya/variants/joxer/overridetree.cb M src/mainboard/google/brya/variants/kano/overridetree.cb M src/mainboard/google/brya/variants/marasov/overridetree.cb M src/mainboard/google/brya/variants/nivviks/overridetree.cb M src/mainboard/google/brya/variants/omnigul/overridetree.cb M src/mainboard/google/brya/variants/pirrha/overridetree.cb M src/mainboard/google/brya/variants/primus/overridetree.cb M src/mainboard/google/brya/variants/quandiso/overridetree.cb M src/mainboard/google/brya/variants/redrix/overridetree.cb M src/mainboard/google/brya/variants/redrix4es/overridetree.cb M src/mainboard/google/brya/variants/riven/overridetree.cb M src/mainboard/google/brya/variants/skolas/overridetree.cb M src/mainboard/google/brya/variants/skolas4es/overridetree.cb M src/mainboard/google/brya/variants/taeko/overridetree.cb M src/mainboard/google/brya/variants/taeko4es/overridetree.cb M src/mainboard/google/brya/variants/taniks/overridetree.cb M src/mainboard/google/brya/variants/teliks/overridetree.cb M src/mainboard/google/brya/variants/telith/overridetree.cb M src/mainboard/google/brya/variants/uldren/overridetree.cb M src/mainboard/google/brya/variants/uldrenite/overridetree.cb M src/mainboard/google/brya/variants/vell/overridetree.cb M src/mainboard/google/brya/variants/volmar/overridetree.cb M src/mainboard/google/brya/variants/xivu/overridetree.cb M src/mainboard/google/brya/variants/yaviks/overridetree.cb M src/mainboard/google/brya/variants/yavilla/overridetree.cb M src/mainboard/google/brya/variants/zydron/overridetree.cb M src/mainboard/google/dedede/variants/awasuki/overridetree.cb M src/mainboard/google/dedede/variants/beadrix/overridetree.cb M src/mainboard/google/dedede/variants/blipper/overridetree.cb M src/mainboard/google/dedede/variants/boten/overridetree.cb M src/mainboard/google/dedede/variants/bugzzy/overridetree.cb M src/mainboard/google/dedede/variants/cappy2/overridetree.cb M src/mainboard/google/dedede/variants/cret/overridetree.cb M src/mainboard/google/dedede/variants/drawcia/overridetree.cb M src/mainboard/google/dedede/variants/galtic/overridetree.cb M src/mainboard/google/dedede/variants/gooey/overridetree.cb M src/mainboard/google/dedede/variants/haboki/overridetree.cb M src/mainboard/google/dedede/variants/kracko/overridetree.cb M src/mainboard/google/dedede/variants/lalala/overridetree.cb M src/mainboard/google/dedede/variants/lantis/overridetree.cb M src/mainboard/google/dedede/variants/magolor/overridetree.cb M src/mainboard/google/dedede/variants/metaknight/overridetree.cb M src/mainboard/google/dedede/variants/pirika/overridetree.cb M src/mainboard/google/dedede/variants/sasuke/overridetree.cb M src/mainboard/google/dedede/variants/sasukette/overridetree.cb M src/mainboard/google/dedede/variants/storo/overridetree.cb M src/mainboard/google/dedede/variants/waddledoo/overridetree.cb M src/mainboard/google/drallion/variants/drallion/devicetree.cb M src/mainboard/google/fatcat/variants/fatcat/overridetree.cb M src/mainboard/google/fatcat/variants/francka/overridetree.cb M src/mainboard/google/glados/variants/lars/overridetree.cb M src/mainboard/google/guybrush/variants/guybrush/overridetree.cb M src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb M src/mainboard/google/hatch/variants/akemi/overridetree.cb M src/mainboard/google/hatch/variants/dratini/overridetree.cb M src/mainboard/google/hatch/variants/hatch/overridetree.cb M src/mainboard/google/hatch/variants/jinlon/overridetree.cb M src/mainboard/google/hatch/variants/kindred/overridetree.cb M src/mainboard/google/hatch/variants/kohaku/overridetree.cb M src/mainboard/google/hatch/variants/mushu/overridetree.cb M src/mainboard/google/kahlee/variants/aleena/overridetree.cb M src/mainboard/google/kahlee/variants/baseboard/devicetree.cb M src/mainboard/google/kahlee/variants/careena/overridetree.cb M src/mainboard/google/kahlee/variants/grunt/overridetree.cb M src/mainboard/google/kahlee/variants/nuwani/overridetree.cb M src/mainboard/google/kahlee/variants/treeya/overridetree.cb M src/mainboard/google/myst/variants/baseboard/devicetree.cb M src/mainboard/google/myst/variants/myst/overridetree.cb M src/mainboard/google/octopus/variants/ampton/overridetree.cb M src/mainboard/google/octopus/variants/bloog/overridetree.cb M src/mainboard/google/octopus/variants/bobba/overridetree.cb M src/mainboard/google/octopus/variants/dood/overridetree.cb M src/mainboard/google/octopus/variants/fleex/overridetree.cb M src/mainboard/google/octopus/variants/garg/overridetree.cb M src/mainboard/google/octopus/variants/meep/overridetree.cb M src/mainboard/google/octopus/variants/phaser/overridetree.cb M src/mainboard/google/octopus/variants/yorp/overridetree.cb M src/mainboard/google/poppy/variants/baseboard/devicetree.cb M src/mainboard/google/poppy/variants/nami/devicetree.cb M src/mainboard/google/reef/variants/baseboard/devicetree.cb M src/mainboard/google/reef/variants/coral/devicetree.cb M src/mainboard/google/reef/variants/pyro/devicetree.cb M src/mainboard/google/reef/variants/sand/devicetree.cb M src/mainboard/google/reef/variants/snappy/devicetree.cb M src/mainboard/google/rex/variants/kanix/overridetree.cb M src/mainboard/google/rex/variants/karis/overridetree.cb M src/mainboard/google/rex/variants/rex0/overridetree.cb M src/mainboard/google/rex/variants/screebo/overridetree.cb M src/mainboard/google/sarien/variants/sarien/devicetree.cb M src/mainboard/google/skyrim/variants/frostflow/overridetree.cb M src/mainboard/google/skyrim/variants/skyrim/overridetree.cb M src/mainboard/google/skyrim/variants/winterhold/overridetree.cb M src/mainboard/google/volteer/variants/chronicler/overridetree.cb M src/mainboard/google/volteer/variants/elemi/overridetree.cb M src/mainboard/google/volteer/variants/lindar/overridetree.cb M src/mainboard/google/volteer/variants/volet/overridetree.cb M src/mainboard/google/volteer/variants/voxel/overridetree.cb M src/mainboard/google/zork/variants/berknip/overridetree.cb M src/mainboard/google/zork/variants/dalboz/overridetree.cb M src/mainboard/google/zork/variants/dirinboz/overridetree.cb M src/mainboard/google/zork/variants/ezkinil/overridetree.cb M src/mainboard/google/zork/variants/gumboz/overridetree.cb M src/mainboard/google/zork/variants/shuboz/overridetree.cb M src/mainboard/google/zork/variants/trembyle/overridetree.cb M src/mainboard/google/zork/variants/vilboz/overridetree.cb M src/mainboard/intel/adlrvp/devicetree.cb M src/mainboard/intel/adlrvp/devicetree_m.cb M src/mainboard/intel/adlrvp/devicetree_n.cb M src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb M src/mainboard/intel/mtlrvp/variants/baseboard/mtlrvp_p/devicetree.cb M util/mainboard/google/puff/template/overridetree.cb 128 files changed, 238 insertions(+), 238 deletions(-) Approvals: Eric Lai: Looks good to me, approved build bot (Jenkins): Verified diff --git a/src/mainboard/google/brox/variants/brox/overridetree.cb b/src/mainboard/google/brox/variants/brox/overridetree.cb index 637e8f1..c915866 100644 --- a/src/mainboard/google/brox/variants/brox/overridetree.cb +++ b/src/mainboard/google/brox/variants/brox/overridetree.cb @@ -226,7 +226,7 @@ chip drivers/usb/acpi register "desc" = ""USB2 Camera"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E7)" device ref usb2_port6 on end end diff --git a/src/mainboard/google/brox/variants/greenbayupoc/overridetree.cb b/src/mainboard/google/brox/variants/greenbayupoc/overridetree.cb index 1939325..e3db6ce 100644 --- a/src/mainboard/google/brox/variants/greenbayupoc/overridetree.cb +++ b/src/mainboard/google/brox/variants/greenbayupoc/overridetree.cb @@ -114,7 +114,7 @@ chip drivers/usb/acpi register "desc" = ""USB2 Camera"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E7)" device ref usb2_port6 on end end @@ -135,7 +135,7 @@ chip drivers/usb/acpi register "desc" = ""USB2 Bluetooth"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)" device ref usb2_port10 on end end diff --git a/src/mainboard/google/brox/variants/jubilant/overridetree.cb b/src/mainboard/google/brox/variants/jubilant/overridetree.cb index afcfc7a..13e3fb6 100644 --- a/src/mainboard/google/brox/variants/jubilant/overridetree.cb +++ b/src/mainboard/google/brox/variants/jubilant/overridetree.cb @@ -232,7 +232,7 @@ chip drivers/usb/acpi register "desc" = ""USB2 Camera"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E7)" device ref usb2_port6 on end end @@ -452,7 +452,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_D13_IRQ)" register "wake" = "GPE0_DW1_13" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brox/variants/lotso/overridetree.cb b/src/mainboard/google/brox/variants/lotso/overridetree.cb index a06b7ec..c6007b1 100644 --- a/src/mainboard/google/brox/variants/lotso/overridetree.cb +++ b/src/mainboard/google/brox/variants/lotso/overridetree.cb @@ -218,7 +218,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E18_IRQ)" register "wake" = "GPE0_DW2_18" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E21)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E20)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/anahera/overridetree.cb b/src/mainboard/google/brya/variants/anahera/overridetree.cb index b26e424..4cc2efc 100644 --- a/src/mainboard/google/brya/variants/anahera/overridetree.cb +++ b/src/mainboard/google/brya/variants/anahera/overridetree.cb @@ -280,7 +280,7 @@ register "enable_off_delay_ms" = "1" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid @@ -325,7 +325,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/anahera4es/overridetree.cb b/src/mainboard/google/brya/variants/anahera4es/overridetree.cb index 93feca8..2e14c64 100644 --- a/src/mainboard/google/brya/variants/anahera4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/anahera4es/overridetree.cb @@ -255,7 +255,7 @@ register "enable_off_delay_ms" = "1" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid @@ -307,7 +307,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/anraggar/overridetree.cb b/src/mainboard/google/brya/variants/anraggar/overridetree.cb index 2f5b1d2..d64063a 100644 --- a/src/mainboard/google/brya/variants/anraggar/overridetree.cb +++ b/src/mainboard/google/brya/variants/anraggar/overridetree.cb @@ -275,7 +275,7 @@ register "link_freq[0]" = "560 * MHz" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -312,7 +312,7 @@ register "vcm_compat" = ""dongwoon,dw9714"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_AFVDD diff --git a/src/mainboard/google/brya/variants/brask/overridetree.cb b/src/mainboard/google/brya/variants/brask/overridetree.cb index 8fc82ba..2fccc24 100644 --- a/src/mainboard/google/brya/variants/brask/overridetree.cb +++ b/src/mainboard/google/brya/variants/brask/overridetree.cb @@ -149,7 +149,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/brya0/overridetree.cb b/src/mainboard/google/brya/variants/brya0/overridetree.cb index df66cdf..3212a5b6 100644 --- a/src/mainboard/google/brya/variants/brya0/overridetree.cb +++ b/src/mainboard/google/brya/variants/brya0/overridetree.cb @@ -552,7 +552,7 @@ register "remote_name" = ""IPU0"" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" @@ -591,7 +591,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR @@ -623,7 +623,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR @@ -658,7 +658,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -696,7 +696,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR @@ -728,7 +728,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR @@ -865,7 +865,7 @@ register "remote_name" = ""IPU0"" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X register "gpio_panel.gpio[1].gpio_num" = "GPP_A17" #EN_UCAM_PWR @@ -907,7 +907,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X @@ -1063,7 +1063,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/craask/overridetree.cb b/src/mainboard/google/brya/variants/craask/overridetree.cb index afc3519..069deb3 100644 --- a/src/mainboard/google/brya/variants/craask/overridetree.cb +++ b/src/mainboard/google/brya/variants/craask/overridetree.cb @@ -425,7 +425,7 @@ register "link_freq[0]" = "DEFAULT_LINK_FREQ" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" #Controls @@ -461,7 +461,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Ov 8856 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" register "ssdb.lanes_used" = "2" @@ -507,7 +507,7 @@ register "device_type" = "INTEL_ACPI_CAMERA_VCM" register "vcm_compat" = ""dongwoon,dw9714"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" #Controls diff --git a/src/mainboard/google/brya/variants/crota/overridetree.cb b/src/mainboard/google/brya/variants/crota/overridetree.cb index fa8a83e..1facf07 100644 --- a/src/mainboard/google/brya/variants/crota/overridetree.cb +++ b/src/mainboard/google/brya/variants/crota/overridetree.cb @@ -320,7 +320,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/dochi/overridetree.cb b/src/mainboard/google/brya/variants/dochi/overridetree.cb index 44a78be..f74db6e 100644 --- a/src/mainboard/google/brya/variants/dochi/overridetree.cb +++ b/src/mainboard/google/brya/variants/dochi/overridetree.cb @@ -308,7 +308,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/gaelin/overridetree.cb b/src/mainboard/google/brya/variants/gaelin/overridetree.cb index 0823abf..af4ff61 100644 --- a/src/mainboard/google/brya/variants/gaelin/overridetree.cb +++ b/src/mainboard/google/brya/variants/gaelin/overridetree.cb @@ -113,7 +113,7 @@ chip drivers/usb/acpi register "desc" = ""UFCamera"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A17)" register "enable_delay_ms" = "20" device ref usb2_port5 on end diff --git a/src/mainboard/google/brya/variants/gimble/overridetree.cb b/src/mainboard/google/brya/variants/gimble/overridetree.cb index af41f84..ce705f7 100644 --- a/src/mainboard/google/brya/variants/gimble/overridetree.cb +++ b/src/mainboard/google/brya/variants/gimble/overridetree.cb @@ -259,7 +259,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/gimble4es/overridetree.cb b/src/mainboard/google/brya/variants/gimble4es/overridetree.cb index eada864..a81425b 100644 --- a/src/mainboard/google/brya/variants/gimble4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/gimble4es/overridetree.cb @@ -223,7 +223,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/glassway/overridetree.cb b/src/mainboard/google/brya/variants/glassway/overridetree.cb index 1657151..684fd83 100644 --- a/src/mainboard/google/brya/variants/glassway/overridetree.cb +++ b/src/mainboard/google/brya/variants/glassway/overridetree.cb @@ -353,7 +353,7 @@ register "stop_off_delay_ms" = "25" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "25" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on probe TOUCHSCREEN_SOURCE TOUCHSCREEN_UNPROVISIONED probe TOUCHSCREEN_SOURCE TOUCHSCREEN_ELAN0001 diff --git a/src/mainboard/google/brya/variants/gothrax/overridetree.cb b/src/mainboard/google/brya/variants/gothrax/overridetree.cb index 2e81e89..32b5d34 100644 --- a/src/mainboard/google/brya/variants/gothrax/overridetree.cb +++ b/src/mainboard/google/brya/variants/gothrax/overridetree.cb @@ -263,7 +263,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "6" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on probe TOUCH_PANEL TOUCH_PANEL_I2C_GENERIC end diff --git a/src/mainboard/google/brya/variants/joxer/overridetree.cb b/src/mainboard/google/brya/variants/joxer/overridetree.cb index e039366..c12d412 100644 --- a/src/mainboard/google/brya/variants/joxer/overridetree.cb +++ b/src/mainboard/google/brya/variants/joxer/overridetree.cb @@ -226,7 +226,7 @@ register "stop_off_delay_ms" = "2" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/brya/variants/kano/overridetree.cb b/src/mainboard/google/brya/variants/kano/overridetree.cb index 2d073f2..7620dde 100644 --- a/src/mainboard/google/brya/variants/kano/overridetree.cb +++ b/src/mainboard/google/brya/variants/kano/overridetree.cb @@ -323,7 +323,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Ov 2740 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "ssdb.lanes_used" = "2" register "ssdb.link_used" = "1" @@ -363,7 +363,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Hi-556 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "ssdb.lanes_used" = "2" register "ssdb.link_used" = "1" @@ -484,7 +484,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/marasov/overridetree.cb b/src/mainboard/google/brya/variants/marasov/overridetree.cb index 2b79721..57f0c90 100644 --- a/src/mainboard/google/brya/variants/marasov/overridetree.cb +++ b/src/mainboard/google/brya/variants/marasov/overridetree.cb @@ -305,7 +305,7 @@ register "enable_delay_ms" = "6" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" register "stop_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on probe TOUCH TOUCH_ELAN0001 end @@ -362,7 +362,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/nivviks/overridetree.cb b/src/mainboard/google/brya/variants/nivviks/overridetree.cb index a42fa7b..6107524 100644 --- a/src/mainboard/google/brya/variants/nivviks/overridetree.cb +++ b/src/mainboard/google/brya/variants/nivviks/overridetree.cb @@ -395,7 +395,7 @@ register "link_freq[0]" = "DEFAULT_LINK_FREQ" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" # Controls @@ -432,7 +432,7 @@ register "device_type" = "INTEL_ACPI_CAMERA_VCM" register "vcm_compat" = ""dongwoon,dw9714"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" # Controls @@ -459,7 +459,7 @@ register "acpi_name" = ""NVM0"" register "chip_name" = ""GT24C08"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" # Controls diff --git a/src/mainboard/google/brya/variants/omnigul/overridetree.cb b/src/mainboard/google/brya/variants/omnigul/overridetree.cb index 2bcf5f18..a6c5ecc 100644 --- a/src/mainboard/google/brya/variants/omnigul/overridetree.cb +++ b/src/mainboard/google/brya/variants/omnigul/overridetree.cb @@ -336,7 +336,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/pirrha/overridetree.cb b/src/mainboard/google/brya/variants/pirrha/overridetree.cb index f0fb290..7d143e4 100644 --- a/src/mainboard/google/brya/variants/pirrha/overridetree.cb +++ b/src/mainboard/google/brya/variants/pirrha/overridetree.cb @@ -310,7 +310,7 @@ register "link_freq[1]" = "180000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" diff --git a/src/mainboard/google/brya/variants/primus/overridetree.cb b/src/mainboard/google/brya/variants/primus/overridetree.cb index c4b56eb..c7a1882 100644 --- a/src/mainboard/google/brya/variants/primus/overridetree.cb +++ b/src/mainboard/google/brya/variants/primus/overridetree.cb @@ -317,7 +317,7 @@ register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" device spi 0 hidden end - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/quandiso/overridetree.cb b/src/mainboard/google/brya/variants/quandiso/overridetree.cb index bebc927..5e0c5a3 100644 --- a/src/mainboard/google/brya/variants/quandiso/overridetree.cb +++ b/src/mainboard/google/brya/variants/quandiso/overridetree.cb @@ -237,7 +237,7 @@ register "stop_off_delay_ms" = "2" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/brya/variants/redrix/overridetree.cb b/src/mainboard/google/brya/variants/redrix/overridetree.cb index c6f4d4f..6a35fc6 100644 --- a/src/mainboard/google/brya/variants/redrix/overridetree.cb +++ b/src/mainboard/google/brya/variants/redrix/overridetree.cb @@ -417,7 +417,7 @@ register "remote_name" = ""IPU0"" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -456,7 +456,7 @@ register "link_freq[0]" = "437000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -549,7 +549,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/redrix4es/overridetree.cb b/src/mainboard/google/brya/variants/redrix4es/overridetree.cb index 99c29ee..3a1ae76 100644 --- a/src/mainboard/google/brya/variants/redrix4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/redrix4es/overridetree.cb @@ -356,7 +356,7 @@ register "remote_name" = ""IPU0"" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -398,7 +398,7 @@ register "link_freq[0]" = "437000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -433,7 +433,7 @@ register "device_type" = "INTEL_ACPI_CAMERA_NVM" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_UCAM_PWR @@ -492,7 +492,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/riven/overridetree.cb b/src/mainboard/google/brya/variants/riven/overridetree.cb index 136bf1c..6f8db3c 100644 --- a/src/mainboard/google/brya/variants/riven/overridetree.cb +++ b/src/mainboard/google/brya/variants/riven/overridetree.cb @@ -313,7 +313,7 @@ register "link_freq[0]" = "DEFAULT_LINK_FREQ" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" #Controls @@ -349,7 +349,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Ov 8856 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" register "ssdb.lanes_used" = "2" @@ -395,7 +395,7 @@ register "device_type" = "INTEL_ACPI_CAMERA_VCM" register "vcm_compat" = ""dongwoon,dw9714"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" #Controls diff --git a/src/mainboard/google/brya/variants/skolas/overridetree.cb b/src/mainboard/google/brya/variants/skolas/overridetree.cb index 5553114..c87690c 100644 --- a/src/mainboard/google/brya/variants/skolas/overridetree.cb +++ b/src/mainboard/google/brya/variants/skolas/overridetree.cb @@ -551,7 +551,7 @@ register "remote_name" = ""IPU0"" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" @@ -590,7 +590,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR @@ -622,7 +622,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR @@ -657,7 +657,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -695,7 +695,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR @@ -727,7 +727,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR @@ -864,7 +864,7 @@ register "remote_name" = ""IPU0"" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X register "gpio_panel.gpio[1].gpio_num" = "GPP_A17" #EN_UCAM_PWR @@ -906,7 +906,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X @@ -1062,7 +1062,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/skolas4es/overridetree.cb b/src/mainboard/google/brya/variants/skolas4es/overridetree.cb index 68486ec..22f846b 100644 --- a/src/mainboard/google/brya/variants/skolas4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/skolas4es/overridetree.cb @@ -392,7 +392,7 @@ register "remote_name" = ""IPU0"" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -427,7 +427,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR @@ -457,7 +457,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR @@ -591,7 +591,7 @@ register "link_freq[1]" = "96 * MHz" # 96 MHz register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X register "gpio_panel.gpio[1].gpio_num" = "GPP_A17" #EN_UCAM_PWR @@ -767,7 +767,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/taeko/overridetree.cb b/src/mainboard/google/brya/variants/taeko/overridetree.cb index 188fb37..13d8836 100644 --- a/src/mainboard/google/brya/variants/taeko/overridetree.cb +++ b/src/mainboard/google/brya/variants/taeko/overridetree.cb @@ -492,7 +492,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end @@ -576,7 +576,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/taeko4es/overridetree.cb b/src/mainboard/google/brya/variants/taeko4es/overridetree.cb index 539f147..bbaa0ca 100644 --- a/src/mainboard/google/brya/variants/taeko4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/taeko4es/overridetree.cb @@ -332,7 +332,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end @@ -436,7 +436,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/taniks/overridetree.cb b/src/mainboard/google/brya/variants/taniks/overridetree.cb index c677d82..807f40a 100644 --- a/src/mainboard/google/brya/variants/taniks/overridetree.cb +++ b/src/mainboard/google/brya/variants/taniks/overridetree.cb @@ -309,7 +309,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end diff --git a/src/mainboard/google/brya/variants/teliks/overridetree.cb b/src/mainboard/google/brya/variants/teliks/overridetree.cb index a6137de..8bff4b6 100644 --- a/src/mainboard/google/brya/variants/teliks/overridetree.cb +++ b/src/mainboard/google/brya/variants/teliks/overridetree.cb @@ -292,7 +292,7 @@ register "link_freq[0]" = "560 * MHz" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -329,7 +329,7 @@ register "vcm_compat" = ""dongwoon,dw9714"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_AFVDD diff --git a/src/mainboard/google/brya/variants/telith/overridetree.cb b/src/mainboard/google/brya/variants/telith/overridetree.cb index d75fbae..964d49c 100644 --- a/src/mainboard/google/brya/variants/telith/overridetree.cb +++ b/src/mainboard/google/brya/variants/telith/overridetree.cb @@ -385,7 +385,7 @@ register "stop_off_delay_ms" = "25" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "25" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end @@ -404,7 +404,7 @@ register "link_freq[0]" = "560 * MHz" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -441,7 +441,7 @@ register "vcm_compat" = ""dongwoon,dw9714"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_AFVDD diff --git a/src/mainboard/google/brya/variants/uldren/overridetree.cb b/src/mainboard/google/brya/variants/uldren/overridetree.cb index 389b842..ff440d9 100644 --- a/src/mainboard/google/brya/variants/uldren/overridetree.cb +++ b/src/mainboard/google/brya/variants/uldren/overridetree.cb @@ -239,7 +239,7 @@ register "stop_off_delay_ms" = "2" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on probe TOUCHSCREEN TOUCHSCREEN_UNKNOWN end diff --git a/src/mainboard/google/brya/variants/uldrenite/overridetree.cb b/src/mainboard/google/brya/variants/uldrenite/overridetree.cb index 3a1482c..e5c98c4 100644 --- a/src/mainboard/google/brya/variants/uldrenite/overridetree.cb +++ b/src/mainboard/google/brya/variants/uldrenite/overridetree.cb @@ -347,7 +347,7 @@ register "stop_off_delay_ms" = "2" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E17)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end # EKTH5012 chip drivers/i2c/hid diff --git a/src/mainboard/google/brya/variants/vell/overridetree.cb b/src/mainboard/google/brya/variants/vell/overridetree.cb index 719d2f4..697d0ef 100644 --- a/src/mainboard/google/brya/variants/vell/overridetree.cb +++ b/src/mainboard/google/brya/variants/vell/overridetree.cb @@ -334,7 +334,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Ov 8856 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "ssdb.lanes_used" = "4" register "ssdb.link_used" = "1" @@ -432,7 +432,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/volmar/overridetree.cb b/src/mainboard/google/brya/variants/volmar/overridetree.cb index 0c095b2..96935170 100644 --- a/src/mainboard/google/brya/variants/volmar/overridetree.cb +++ b/src/mainboard/google/brya/variants/volmar/overridetree.cb @@ -345,7 +345,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/brya/variants/xivu/overridetree.cb b/src/mainboard/google/brya/variants/xivu/overridetree.cb index be4d8df..36eea07 100644 --- a/src/mainboard/google/brya/variants/xivu/overridetree.cb +++ b/src/mainboard/google/brya/variants/xivu/overridetree.cb @@ -260,7 +260,7 @@ register "link_freq[1]" = "180000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" diff --git a/src/mainboard/google/brya/variants/yaviks/overridetree.cb b/src/mainboard/google/brya/variants/yaviks/overridetree.cb index 5a3a7d8..2c7ae20 100644 --- a/src/mainboard/google/brya/variants/yaviks/overridetree.cb +++ b/src/mainboard/google/brya/variants/yaviks/overridetree.cb @@ -244,7 +244,7 @@ register "stop_off_delay_ms" = "2" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "5" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on probe TOUCH_PANEL TOUCH_I2C end @@ -324,7 +324,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Ov 8856 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "ssdb.lanes_used" = "2" register "ssdb.link_used" = "1" diff --git a/src/mainboard/google/brya/variants/yavilla/overridetree.cb b/src/mainboard/google/brya/variants/yavilla/overridetree.cb index 973a16b..be92617 100644 --- a/src/mainboard/google/brya/variants/yavilla/overridetree.cb +++ b/src/mainboard/google/brya/variants/yavilla/overridetree.cb @@ -261,7 +261,7 @@ register "stop_off_delay_ms" = "2" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on probe TOUCH_PANEL TOUCH_ELAN_I2C end @@ -354,7 +354,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Ov 8856 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" register "ssdb.lanes_used" = "4" @@ -399,7 +399,7 @@ register "device_type" = "INTEL_ACPI_CAMERA_VCM" register "vcm_compat" = ""dongwoon,dw9714"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" #Controls diff --git a/src/mainboard/google/brya/variants/zydron/overridetree.cb b/src/mainboard/google/brya/variants/zydron/overridetree.cb index e006198..b02cb07 100644 --- a/src/mainboard/google/brya/variants/zydron/overridetree.cb +++ b/src/mainboard/google/brya/variants/zydron/overridetree.cb @@ -299,7 +299,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Ov 2740 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "ssdb.lanes_used" = "2" register "ssdb.link_used" = "1" @@ -339,7 +339,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Hi-556 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "ssdb.lanes_used" = "2" register "ssdb.link_used" = "1" @@ -460,7 +460,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/dedede/variants/awasuki/overridetree.cb b/src/mainboard/google/dedede/variants/awasuki/overridetree.cb index e0abe19..bf45bcf 100644 --- a/src/mainboard/google/dedede/variants/awasuki/overridetree.cb +++ b/src/mainboard/google/dedede/variants/awasuki/overridetree.cb @@ -155,7 +155,7 @@ chip drivers/usb/acpi register "desc" = ""User Facing Camera"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D15)" register "enable_delay_ms" = "20" device usb 2.5 on end @@ -209,7 +209,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "7" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end # I2C 2 diff --git a/src/mainboard/google/dedede/variants/beadrix/overridetree.cb b/src/mainboard/google/dedede/variants/beadrix/overridetree.cb index 0c911e0..c4e550c 100644 --- a/src/mainboard/google/dedede/variants/beadrix/overridetree.cb +++ b/src/mainboard/google/dedede/variants/beadrix/overridetree.cb @@ -134,7 +134,7 @@ chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" diff --git a/src/mainboard/google/dedede/variants/blipper/overridetree.cb b/src/mainboard/google/dedede/variants/blipper/overridetree.cb index a507dd1..4b42f0e 100644 --- a/src/mainboard/google/dedede/variants/blipper/overridetree.cb +++ b/src/mainboard/google/dedede/variants/blipper/overridetree.cb @@ -160,7 +160,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end # I2C 2 diff --git a/src/mainboard/google/dedede/variants/boten/overridetree.cb b/src/mainboard/google/dedede/variants/boten/overridetree.cb index ca0a59a..3e0e7b3 100644 --- a/src/mainboard/google/dedede/variants/boten/overridetree.cb +++ b/src/mainboard/google/dedede/variants/boten/overridetree.cb @@ -154,7 +154,7 @@ chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "10" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" diff --git a/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb b/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb index 6a20938..2520966 100644 --- a/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb +++ b/src/mainboard/google/dedede/variants/bugzzy/overridetree.cb @@ -152,7 +152,7 @@ chip drivers/usb/acpi register "desc" = ""UFCamera"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D13)" register "enable_delay_ms" = "20" device usb 2.5 on end @@ -160,7 +160,7 @@ chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" @@ -247,7 +247,7 @@ register "link_freq[1]" = "180000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz diff --git a/src/mainboard/google/dedede/variants/cappy2/overridetree.cb b/src/mainboard/google/dedede/variants/cappy2/overridetree.cb index c01da38..e4e39f3 100644 --- a/src/mainboard/google/dedede/variants/cappy2/overridetree.cb +++ b/src/mainboard/google/dedede/variants/cappy2/overridetree.cb @@ -113,7 +113,7 @@ chip drivers/usb/acpi register "desc" = ""UFCamera"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D15)" register "enable_delay_ms" = "20" device usb 2.5 on end diff --git a/src/mainboard/google/dedede/variants/cret/overridetree.cb b/src/mainboard/google/dedede/variants/cret/overridetree.cb index 05f5720..1c834f4 100644 --- a/src/mainboard/google/dedede/variants/cret/overridetree.cb +++ b/src/mainboard/google/dedede/variants/cret/overridetree.cb @@ -122,7 +122,7 @@ chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "10" @@ -188,7 +188,7 @@ register "stop_off_delay_ms" = "2" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/dedede/variants/drawcia/overridetree.cb b/src/mainboard/google/dedede/variants/drawcia/overridetree.cb index 6c745d9..791f697 100644 --- a/src/mainboard/google/dedede/variants/drawcia/overridetree.cb +++ b/src/mainboard/google/dedede/variants/drawcia/overridetree.cb @@ -152,7 +152,7 @@ register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" register "group" = "ACPI_PLD_GROUP(2, 2)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" @@ -236,7 +236,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid @@ -313,7 +313,7 @@ register "link_freq[1]" = "180000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "low_power_probe" = "1" #Controls @@ -349,7 +349,7 @@ register "chip_name" = ""DW AF DAC"" register "device_type" = "INTEL_ACPI_CAMERA_VCM" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "vcm_compat" = ""dongwoon,dw9714"" register "low_power_probe" = "1" @@ -379,7 +379,7 @@ register "nvm_compat" = ""atmel,24c08"" register "low_power_probe" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "gpio_panel.gpio[0].gpio_num" = "GPP_D14" #power_enable_1p2 #_ON diff --git a/src/mainboard/google/dedede/variants/galtic/overridetree.cb b/src/mainboard/google/dedede/variants/galtic/overridetree.cb index 51d5a7a..32977c6e 100644 --- a/src/mainboard/google/dedede/variants/galtic/overridetree.cb +++ b/src/mainboard/google/dedede/variants/galtic/overridetree.cb @@ -166,7 +166,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on probe TOUCHSCREEN_SOURCE TOUCHSCREEN_ELAN1001 probe TOUCHSCREEN_SOURCE TOUCHSCREEN_UNPROVISIONED diff --git a/src/mainboard/google/dedede/variants/gooey/overridetree.cb b/src/mainboard/google/dedede/variants/gooey/overridetree.cb index eddbc11..728ab91 100644 --- a/src/mainboard/google/dedede/variants/gooey/overridetree.cb +++ b/src/mainboard/google/dedede/variants/gooey/overridetree.cb @@ -133,7 +133,7 @@ chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "10" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" diff --git a/src/mainboard/google/dedede/variants/haboki/overridetree.cb b/src/mainboard/google/dedede/variants/haboki/overridetree.cb index 704e458..7125446 100644 --- a/src/mainboard/google/dedede/variants/haboki/overridetree.cb +++ b/src/mainboard/google/dedede/variants/haboki/overridetree.cb @@ -158,7 +158,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid @@ -222,7 +222,7 @@ register "link_freq[1]" = "180000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz diff --git a/src/mainboard/google/dedede/variants/kracko/overridetree.cb b/src/mainboard/google/dedede/variants/kracko/overridetree.cb index ae70769..e4d9ad9 100644 --- a/src/mainboard/google/dedede/variants/kracko/overridetree.cb +++ b/src/mainboard/google/dedede/variants/kracko/overridetree.cb @@ -124,7 +124,7 @@ register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" register "group" = "ACPI_PLD_GROUP(2, 2)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" @@ -210,7 +210,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/dedede/variants/lalala/overridetree.cb b/src/mainboard/google/dedede/variants/lalala/overridetree.cb index 7b849b2..00046d8 100644 --- a/src/mainboard/google/dedede/variants/lalala/overridetree.cb +++ b/src/mainboard/google/dedede/variants/lalala/overridetree.cb @@ -187,7 +187,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/generic @@ -199,7 +199,7 @@ register "reset_delay_ms" = "100" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "50" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end end # I2C 2 @@ -219,7 +219,7 @@ register "link_freq[0]" = "DEFAULT_LINK_FREQ" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz diff --git a/src/mainboard/google/dedede/variants/lantis/overridetree.cb b/src/mainboard/google/dedede/variants/lantis/overridetree.cb index c568408..5f6ed23 100644 --- a/src/mainboard/google/dedede/variants/lantis/overridetree.cb +++ b/src/mainboard/google/dedede/variants/lantis/overridetree.cb @@ -191,7 +191,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on probe TS_DRIVER_SOURCE TS_UNPROVISIONED probe TS_DRIVER_SOURCE TS_ELAN0001 diff --git a/src/mainboard/google/dedede/variants/magolor/overridetree.cb b/src/mainboard/google/dedede/variants/magolor/overridetree.cb index 9408ca6..75fa38f 100644 --- a/src/mainboard/google/dedede/variants/magolor/overridetree.cb +++ b/src/mainboard/google/dedede/variants/magolor/overridetree.cb @@ -315,7 +315,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on probe TS_SOURCE TS_UNPROVISIONED probe TS_SOURCE TS_ELAN_0001 @@ -330,7 +330,7 @@ register "reset_delay_ms" = "100" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "50" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on probe TS_SOURCE TS_UNPROVISIONED probe TS_SOURCE TS_RAYD_0001 @@ -353,7 +353,7 @@ register "link_freq[0]" = "DEFAULT_LINK_FREQ" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz @@ -398,7 +398,7 @@ register "link_freq[1]" = "360000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz diff --git a/src/mainboard/google/dedede/variants/metaknight/overridetree.cb b/src/mainboard/google/dedede/variants/metaknight/overridetree.cb index 3337f6a..d50fb7c 100644 --- a/src/mainboard/google/dedede/variants/metaknight/overridetree.cb +++ b/src/mainboard/google/dedede/variants/metaknight/overridetree.cb @@ -130,7 +130,7 @@ register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" register "group" = "ACPI_PLD_GROUP(2, 2)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" diff --git a/src/mainboard/google/dedede/variants/pirika/overridetree.cb b/src/mainboard/google/dedede/variants/pirika/overridetree.cb index b305f26..cf1f95e 100644 --- a/src/mainboard/google/dedede/variants/pirika/overridetree.cb +++ b/src/mainboard/google/dedede/variants/pirika/overridetree.cb @@ -166,7 +166,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end # I2C 2 diff --git a/src/mainboard/google/dedede/variants/sasuke/overridetree.cb b/src/mainboard/google/dedede/variants/sasuke/overridetree.cb index dcd5cbb..0da00ca 100644 --- a/src/mainboard/google/dedede/variants/sasuke/overridetree.cb +++ b/src/mainboard/google/dedede/variants/sasuke/overridetree.cb @@ -123,7 +123,7 @@ chip drivers/usb/acpi register "desc" = ""UFCamera"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D13)" register "enable_delay_ms" = "20" device usb 2.5 on end @@ -131,7 +131,7 @@ chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" diff --git a/src/mainboard/google/dedede/variants/sasukette/overridetree.cb b/src/mainboard/google/dedede/variants/sasukette/overridetree.cb index 1b1df26..ba262b6 100644 --- a/src/mainboard/google/dedede/variants/sasukette/overridetree.cb +++ b/src/mainboard/google/dedede/variants/sasukette/overridetree.cb @@ -132,7 +132,7 @@ chip drivers/usb/acpi register "desc" = ""UFCamera"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D15)" register "enable_delay_ms" = "20" device usb 2.5 on end @@ -140,7 +140,7 @@ chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" diff --git a/src/mainboard/google/dedede/variants/storo/overridetree.cb b/src/mainboard/google/dedede/variants/storo/overridetree.cb index cfaf28f..e243ada 100644 --- a/src/mainboard/google/dedede/variants/storo/overridetree.cb +++ b/src/mainboard/google/dedede/variants/storo/overridetree.cb @@ -159,7 +159,7 @@ chip drivers/usb/acpi register "desc" = ""User Facing Camera"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D15)" register "enable_delay_ms" = "20" device usb 2.5 on end @@ -167,7 +167,7 @@ chip drivers/usb/acpi register "desc" = ""LTE"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)" register "reset_off_delay_ms" = "10" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" @@ -237,7 +237,7 @@ register "link_freq[1]" = "180000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz diff --git a/src/mainboard/google/dedede/variants/waddledoo/overridetree.cb b/src/mainboard/google/dedede/variants/waddledoo/overridetree.cb index 82b74ce..de3d542 100644 --- a/src/mainboard/google/dedede/variants/waddledoo/overridetree.cb +++ b/src/mainboard/google/dedede/variants/waddledoo/overridetree.cb @@ -154,7 +154,7 @@ register "link_freq[1]" = "180000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz @@ -213,7 +213,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Ov 9734 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "ssdb.lanes_used" = "1" register "num_freq_entries" = "1" diff --git a/src/mainboard/google/drallion/variants/drallion/devicetree.cb b/src/mainboard/google/drallion/variants/drallion/devicetree.cb index 7238a06..561685f 100644 --- a/src/mainboard/google/drallion/variants/drallion/devicetree.cb +++ b/src/mainboard/google/drallion/variants/drallion/devicetree.cb @@ -378,7 +378,7 @@ register "stop_delay_ms" = "115" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)" register "enable_delay_ms" = "55" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "device_present_gpio" = "GPP_B4" register "device_present_gpio_invert" = "1" device i2c 34 on end diff --git a/src/mainboard/google/fatcat/variants/fatcat/overridetree.cb b/src/mainboard/google/fatcat/variants/fatcat/overridetree.cb index 73085ed..5a4af8e 100644 --- a/src/mainboard/google/fatcat/variants/fatcat/overridetree.cb +++ b/src/mainboard/google/fatcat/variants/fatcat/overridetree.cb @@ -378,7 +378,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_D01_IRQ)" register "wake" = "GPE0_DW1_01" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C15)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E19)" register "enable_delay_ms" = "3" @@ -585,7 +585,7 @@ register "link_freq[0]" = "560000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "0" register "clk_panel.clks[0].freq" = "1" #19.2 Mhz @@ -657,7 +657,7 @@ register "link_freq[0]" = "560000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" register "clk_panel.clks[0].freq" = "1" #19.2 Mhz diff --git a/src/mainboard/google/fatcat/variants/francka/overridetree.cb b/src/mainboard/google/fatcat/variants/francka/overridetree.cb index 9dfab4d..fed7294 100644 --- a/src/mainboard/google/fatcat/variants/francka/overridetree.cb +++ b/src/mainboard/google/fatcat/variants/francka/overridetree.cb @@ -291,7 +291,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F18_IRQ)" register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F16)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H03)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/glados/variants/lars/overridetree.cb b/src/mainboard/google/glados/variants/lars/overridetree.cb index 1165520..8c6f484 100644 --- a/src/mainboard/google/glados/variants/lars/overridetree.cb +++ b/src/mainboard/google/glados/variants/lars/overridetree.cb @@ -28,7 +28,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E23)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/generic @@ -40,7 +40,7 @@ register "reset_delay_ms" = "10" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E23)" register "enable_delay_ms" = "55" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 34 on end end end diff --git a/src/mainboard/google/guybrush/variants/guybrush/overridetree.cb b/src/mainboard/google/guybrush/variants/guybrush/overridetree.cb index a748aeb..669bf15 100644 --- a/src/mainboard/google/guybrush/variants/guybrush/overridetree.cb +++ b/src/mainboard/google/guybrush/variants/guybrush/overridetree.cb @@ -172,7 +172,7 @@ register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_21)" register "wake" = "GEVENT_5" register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_11)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_32)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb b/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb index cce354c..f221adc 100644 --- a/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb +++ b/src/mainboard/google/guybrush/variants/nipperkin/overridetree.cb @@ -306,7 +306,7 @@ register "enable_delay_ms" = "1" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_121)" register "reset_delay_ms" = "20" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid @@ -347,7 +347,7 @@ register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_21)" register "wake" = "GEVENT_5" register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_11)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_3)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/hatch/variants/akemi/overridetree.cb b/src/mainboard/google/hatch/variants/akemi/overridetree.cb index 1f5a5b5..1102c87 100644 --- a/src/mainboard/google/hatch/variants/akemi/overridetree.cb +++ b/src/mainboard/google/hatch/variants/akemi/overridetree.cb @@ -145,7 +145,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)" register "stop_off_delay_ms" = "5" device i2c 10 on end diff --git a/src/mainboard/google/hatch/variants/dratini/overridetree.cb b/src/mainboard/google/hatch/variants/dratini/overridetree.cb index 7e25df5..5ae9481 100644 --- a/src/mainboard/google/hatch/variants/dratini/overridetree.cb +++ b/src/mainboard/google/hatch/variants/dratini/overridetree.cb @@ -105,7 +105,7 @@ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" register "reset_delay_ms" = "100" register "reset_off_delay_ms" = "5" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" diff --git a/src/mainboard/google/hatch/variants/hatch/overridetree.cb b/src/mainboard/google/hatch/variants/hatch/overridetree.cb index e302aff..36f4895 100644 --- a/src/mainboard/google/hatch/variants/hatch/overridetree.cb +++ b/src/mainboard/google/hatch/variants/hatch/overridetree.cb @@ -94,7 +94,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)" register "stop_off_delay_ms" = "5" device i2c 49 on end diff --git a/src/mainboard/google/hatch/variants/jinlon/overridetree.cb b/src/mainboard/google/hatch/variants/jinlon/overridetree.cb index 88753de..4f861c9 100644 --- a/src/mainboard/google/hatch/variants/jinlon/overridetree.cb +++ b/src/mainboard/google/hatch/variants/jinlon/overridetree.cb @@ -135,7 +135,7 @@ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" register "reset_delay_ms" = "100" register "reset_off_delay_ms" = "5" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" diff --git a/src/mainboard/google/hatch/variants/kindred/overridetree.cb b/src/mainboard/google/hatch/variants/kindred/overridetree.cb index c0dbde0..f47fce0 100644 --- a/src/mainboard/google/hatch/variants/kindred/overridetree.cb +++ b/src/mainboard/google/hatch/variants/kindred/overridetree.cb @@ -141,7 +141,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 49 on end end chip drivers/i2c/generic @@ -155,7 +155,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb index 67f5238..d6f5f60 100644 --- a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb +++ b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb @@ -143,7 +143,7 @@ register "reset_delay_ms" = "91" # 90.5 ms register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C12)" register "enable_delay_ms" = "1" # 90 ns - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "detect" = "1" device i2c 4b on end end @@ -159,7 +159,7 @@ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" register "reset_delay_ms" = "20" register "reset_off_delay_ms" = "2" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end # I2C #1 diff --git a/src/mainboard/google/hatch/variants/mushu/overridetree.cb b/src/mainboard/google/hatch/variants/mushu/overridetree.cb index 0424da2..43801bf 100644 --- a/src/mainboard/google/hatch/variants/mushu/overridetree.cb +++ b/src/mainboard/google/hatch/variants/mushu/overridetree.cb @@ -114,7 +114,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)" register "stop_off_delay_ms" = "5" device i2c 49 on end diff --git a/src/mainboard/google/kahlee/variants/aleena/overridetree.cb b/src/mainboard/google/kahlee/variants/aleena/overridetree.cb index c5d484b..3e5554c 100644 --- a/src/mainboard/google/kahlee/variants/aleena/overridetree.cb +++ b/src/mainboard/google/kahlee/variants/aleena/overridetree.cb @@ -56,7 +56,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end end diff --git a/src/mainboard/google/kahlee/variants/baseboard/devicetree.cb b/src/mainboard/google/kahlee/variants/baseboard/devicetree.cb index ca8933a..4deac2b 100644 --- a/src/mainboard/google/kahlee/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/kahlee/variants/baseboard/devicetree.cb @@ -93,7 +93,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/generic @@ -105,7 +105,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end diff --git a/src/mainboard/google/kahlee/variants/careena/overridetree.cb b/src/mainboard/google/kahlee/variants/careena/overridetree.cb index 666373f..2c551ec 100644 --- a/src/mainboard/google/kahlee/variants/careena/overridetree.cb +++ b/src/mainboard/google/kahlee/variants/careena/overridetree.cb @@ -65,7 +65,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/kahlee/variants/grunt/overridetree.cb b/src/mainboard/google/kahlee/variants/grunt/overridetree.cb index 0b155c5..8c23233 100644 --- a/src/mainboard/google/kahlee/variants/grunt/overridetree.cb +++ b/src/mainboard/google/kahlee/variants/grunt/overridetree.cb @@ -44,7 +44,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end end diff --git a/src/mainboard/google/kahlee/variants/nuwani/overridetree.cb b/src/mainboard/google/kahlee/variants/nuwani/overridetree.cb index 74ab535..f53a672 100644 --- a/src/mainboard/google/kahlee/variants/nuwani/overridetree.cb +++ b/src/mainboard/google/kahlee/variants/nuwani/overridetree.cb @@ -93,7 +93,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end end diff --git a/src/mainboard/google/kahlee/variants/treeya/overridetree.cb b/src/mainboard/google/kahlee/variants/treeya/overridetree.cb index 5c70524..011b3a1 100644 --- a/src/mainboard/google/kahlee/variants/treeya/overridetree.cb +++ b/src/mainboard/google/kahlee/variants/treeya/overridetree.cb @@ -98,7 +98,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end end diff --git a/src/mainboard/google/myst/variants/baseboard/devicetree.cb b/src/mainboard/google/myst/variants/baseboard/devicetree.cb index 3cc2626..62e19bf 100644 --- a/src/mainboard/google/myst/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/myst/variants/baseboard/devicetree.cb @@ -261,7 +261,7 @@ chip drivers/usb/acpi register "desc" = ""USB3 WWAN"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_6)" register "enable_delay_ms" = "20" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_11)" diff --git a/src/mainboard/google/myst/variants/myst/overridetree.cb b/src/mainboard/google/myst/variants/myst/overridetree.cb index 05db7ee..9dc8f01 100644 --- a/src/mainboard/google/myst/variants/myst/overridetree.cb +++ b/src/mainboard/google/myst/variants/myst/overridetree.cb @@ -114,7 +114,7 @@ register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_18)" register "wake" = "GEVENT_14" register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_40)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_4)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/octopus/variants/ampton/overridetree.cb b/src/mainboard/google/octopus/variants/ampton/overridetree.cb index fdfc012..ee607aa 100644 --- a/src/mainboard/google/octopus/variants/ampton/overridetree.cb +++ b/src/mainboard/google/octopus/variants/ampton/overridetree.cb @@ -119,7 +119,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/octopus/variants/bloog/overridetree.cb b/src/mainboard/google/octopus/variants/bloog/overridetree.cb index a38ba8e..32e17cb 100644 --- a/src/mainboard/google/octopus/variants/bloog/overridetree.cb +++ b/src/mainboard/google/octopus/variants/bloog/overridetree.cb @@ -134,7 +134,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/octopus/variants/bobba/overridetree.cb b/src/mainboard/google/octopus/variants/bobba/overridetree.cb index 70d5e0d..a79d15e 100644 --- a/src/mainboard/google/octopus/variants/bobba/overridetree.cb +++ b/src/mainboard/google/octopus/variants/bobba/overridetree.cb @@ -195,7 +195,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/generic @@ -207,7 +207,7 @@ register "reset_delay_ms" = "1" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "50" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/octopus/variants/dood/overridetree.cb b/src/mainboard/google/octopus/variants/dood/overridetree.cb index 5d5c049..eb8490d 100644 --- a/src/mainboard/google/octopus/variants/dood/overridetree.cb +++ b/src/mainboard/google/octopus/variants/dood/overridetree.cb @@ -130,7 +130,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/generic @@ -142,7 +142,7 @@ register "reset_delay_ms" = "1" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "50" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/octopus/variants/fleex/overridetree.cb b/src/mainboard/google/octopus/variants/fleex/overridetree.cb index c63c393..3a17abb 100644 --- a/src/mainboard/google/octopus/variants/fleex/overridetree.cb +++ b/src/mainboard/google/octopus/variants/fleex/overridetree.cb @@ -181,7 +181,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/octopus/variants/garg/overridetree.cb b/src/mainboard/google/octopus/variants/garg/overridetree.cb index 26b7b17..a653148 100644 --- a/src/mainboard/google/octopus/variants/garg/overridetree.cb +++ b/src/mainboard/google/octopus/variants/garg/overridetree.cb @@ -172,7 +172,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/generic @@ -184,7 +184,7 @@ register "reset_delay_ms" = "1" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "50" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/octopus/variants/meep/overridetree.cb b/src/mainboard/google/octopus/variants/meep/overridetree.cb index 7141055..9634cf1 100644 --- a/src/mainboard/google/octopus/variants/meep/overridetree.cb +++ b/src/mainboard/google/octopus/variants/meep/overridetree.cb @@ -215,7 +215,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/octopus/variants/phaser/overridetree.cb b/src/mainboard/google/octopus/variants/phaser/overridetree.cb index 29052da..41b654c8 100644 --- a/src/mainboard/google/octopus/variants/phaser/overridetree.cb +++ b/src/mainboard/google/octopus/variants/phaser/overridetree.cb @@ -158,7 +158,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid @@ -182,7 +182,7 @@ register "reset_delay_ms" = "1" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_146)" register "enable_delay_ms" = "50" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/octopus/variants/yorp/overridetree.cb b/src/mainboard/google/octopus/variants/yorp/overridetree.cb index f802341..82a0ee4 100644 --- a/src/mainboard/google/octopus/variants/yorp/overridetree.cb +++ b/src/mainboard/google/octopus/variants/yorp/overridetree.cb @@ -93,7 +93,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_213)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end # - I2C 7 diff --git a/src/mainboard/google/poppy/variants/baseboard/devicetree.cb b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb index feea932..1e39241 100644 --- a/src/mainboard/google/poppy/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb @@ -249,7 +249,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C22)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/generic @@ -257,7 +257,7 @@ register "desc" = ""Atmel Touchscreen"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" register "detect" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C22)" register "enable_delay_ms" = "250" device i2c 4b on end diff --git a/src/mainboard/google/poppy/variants/nami/devicetree.cb b/src/mainboard/google/poppy/variants/nami/devicetree.cb index 139a3c8..d28aff9 100644 --- a/src/mainboard/google/poppy/variants/nami/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nami/devicetree.cb @@ -245,7 +245,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B4)" register "enable_delay_ms" = "5" register "enable_off_delay_ms" = "100" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C3)" register "stop_off_delay_ms" = "2" device i2c 10 on end @@ -261,7 +261,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B4)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "100" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C3)" register "stop_delay_ms" = "20" register "stop_off_delay_ms" = "2" diff --git a/src/mainboard/google/reef/variants/baseboard/devicetree.cb b/src/mainboard/google/reef/variants/baseboard/devicetree.cb index 1192a5f..8b42a1c 100644 --- a/src/mainboard/google/reef/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/reef/variants/baseboard/devicetree.cb @@ -190,7 +190,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end # - I2C 3 diff --git a/src/mainboard/google/reef/variants/coral/devicetree.cb b/src/mainboard/google/reef/variants/coral/devicetree.cb index df39932..0c1f122 100644 --- a/src/mainboard/google/reef/variants/coral/devicetree.cb +++ b/src/mainboard/google/reef/variants/coral/devicetree.cb @@ -190,7 +190,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/generic @@ -202,7 +202,7 @@ register "reset_delay_ms" = "1" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)" register "enable_delay_ms" = "50" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end end # - I2C 3 diff --git a/src/mainboard/google/reef/variants/pyro/devicetree.cb b/src/mainboard/google/reef/variants/pyro/devicetree.cb index 022dc8b..41e6669 100644 --- a/src/mainboard/google/reef/variants/pyro/devicetree.cb +++ b/src/mainboard/google/reef/variants/pyro/devicetree.cb @@ -212,7 +212,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end # - I2C 3 diff --git a/src/mainboard/google/reef/variants/sand/devicetree.cb b/src/mainboard/google/reef/variants/sand/devicetree.cb index f97614d..abab168 100644 --- a/src/mainboard/google/reef/variants/sand/devicetree.cb +++ b/src/mainboard/google/reef/variants/sand/devicetree.cb @@ -186,7 +186,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end end # - I2C 3 diff --git a/src/mainboard/google/reef/variants/snappy/devicetree.cb b/src/mainboard/google/reef/variants/snappy/devicetree.cb index fd30ce7..81cbef5 100644 --- a/src/mainboard/google/reef/variants/snappy/devicetree.cb +++ b/src/mainboard/google/reef/variants/snappy/devicetree.cb @@ -195,7 +195,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/generic @@ -216,7 +216,7 @@ register "reset_delay_ms" = "1" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)" register "enable_delay_ms" = "5" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 34 on end end chip drivers/i2c/generic @@ -228,7 +228,7 @@ register "reset_delay_ms" = "1" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)" register "enable_delay_ms" = "50" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/rex/variants/kanix/overridetree.cb b/src/mainboard/google/rex/variants/kanix/overridetree.cb index d950d8c..0d76351 100644 --- a/src/mainboard/google/rex/variants/kanix/overridetree.cb +++ b/src/mainboard/google/rex/variants/kanix/overridetree.cb @@ -474,7 +474,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Hi-556 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "ssdb.lanes_used" = "2" register "ssdb.link_used" = "1" @@ -523,7 +523,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_B09" #EN_FCAM_PWR @@ -591,7 +591,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E10_IRQ)" register "wake" = "GPE0_DW1_10" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C23)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B11)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/rex/variants/karis/overridetree.cb b/src/mainboard/google/rex/variants/karis/overridetree.cb index 8e70c18..ea45d61 100644 --- a/src/mainboard/google/rex/variants/karis/overridetree.cb +++ b/src/mainboard/google/rex/variants/karis/overridetree.cb @@ -456,7 +456,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Hi-556 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "ssdb.lanes_used" = "2" register "ssdb.link_used" = "1" @@ -505,7 +505,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_B09" #EN_FCAM_PWR @@ -556,7 +556,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E10_IRQ)" register "wake" = "GPE0_DW1_10" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C23)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B11)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/rex/variants/rex0/overridetree.cb b/src/mainboard/google/rex/variants/rex0/overridetree.cb index 31f4cac..66b2bc9 100644 --- a/src/mainboard/google/rex/variants/rex0/overridetree.cb +++ b/src/mainboard/google/rex/variants/rex0/overridetree.cb @@ -380,7 +380,7 @@ chip drivers/usb/acpi register "desc" = ""USB2 Camera"" register "type" = "UPC_TYPE_INTERNAL" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B09)" device ref usb2_port6 on probe UFC UFC_USB @@ -477,7 +477,7 @@ register "remote_name" = ""IPU0"" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" # IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" # FREQ_19_2_MHZ @@ -515,7 +515,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_C04" #EN_WCAM_PWR @@ -547,7 +547,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_C04" #EN_WCAM_PWR @@ -620,7 +620,7 @@ register "acpi_name" = ""CAM1"" register "chip_name" = ""Hi-556 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "ssdb.lanes_used" = "2" register "ssdb.link_used" = "1" @@ -669,7 +669,7 @@ register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_B09" #EN_FCAM_PWR @@ -816,7 +816,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E10_IRQ)" register "wake" = "GPE0_DW1_10" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C23)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B11)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/rex/variants/screebo/overridetree.cb b/src/mainboard/google/rex/variants/screebo/overridetree.cb index 3763701..e79cf8c 100644 --- a/src/mainboard/google/rex/variants/screebo/overridetree.cb +++ b/src/mainboard/google/rex/variants/screebo/overridetree.cb @@ -498,7 +498,7 @@ register "compat_string" = ""google,cros-ec-spi"" register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E10_IRQ)" register "wake" = "GPE0_DW1_10" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C21)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B08)" register "enable_delay_ms" = "3" @@ -519,7 +519,7 @@ register "remote_name" = ""IPU0"" register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_2" register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" @@ -549,7 +549,7 @@ register "chip_name" = ""M24C64X"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "gpio_panel.gpio[0].gpio_num" = "GPP_A12" #EN_UCAM_PWR diff --git a/src/mainboard/google/sarien/variants/sarien/devicetree.cb b/src/mainboard/google/sarien/variants/sarien/devicetree.cb index d10fd1f..e01e660 100644 --- a/src/mainboard/google/sarien/variants/sarien/devicetree.cb +++ b/src/mainboard/google/sarien/variants/sarien/devicetree.cb @@ -337,7 +337,7 @@ register "reset_delay_ms" = "10" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)" register "enable_delay_ms" = "55" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "device_present_gpio" = "GPP_B4" register "device_present_gpio_invert" = "1" device i2c 34 on end diff --git a/src/mainboard/google/skyrim/variants/frostflow/overridetree.cb b/src/mainboard/google/skyrim/variants/frostflow/overridetree.cb index b1fccf9..c81fe11 100644 --- a/src/mainboard/google/skyrim/variants/frostflow/overridetree.cb +++ b/src/mainboard/google/skyrim/variants/frostflow/overridetree.cb @@ -129,7 +129,7 @@ register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_24)" register "wake" = "GEVENT_15" register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_12)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_4)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/skyrim/variants/skyrim/overridetree.cb b/src/mainboard/google/skyrim/variants/skyrim/overridetree.cb index be498fc..8272169 100644 --- a/src/mainboard/google/skyrim/variants/skyrim/overridetree.cb +++ b/src/mainboard/google/skyrim/variants/skyrim/overridetree.cb @@ -62,7 +62,7 @@ register "desc" = ""WWAN"" register "type" = "UPC_TYPE_INTERNAL" register "group" = "ACPI_PLD_GROUP(2, 2)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_42)" register "reset_off_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_8)" @@ -157,7 +157,7 @@ register "reset_off_delay_ms" = "2" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_76)" register "stop_off_delay_ms" = "2" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end # I2C1 @@ -234,7 +234,7 @@ register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_24)" register "wake" = "GEVENT_15" register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_12)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_4)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/skyrim/variants/winterhold/overridetree.cb b/src/mainboard/google/skyrim/variants/winterhold/overridetree.cb index 490b415..9fcf99f 100644 --- a/src/mainboard/google/skyrim/variants/winterhold/overridetree.cb +++ b/src/mainboard/google/skyrim/variants/winterhold/overridetree.cb @@ -206,7 +206,7 @@ register "reset_off_delay_ms" = "2" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_76)" register "stop_off_delay_ms" = "2" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 34 on end end end # I2C1 @@ -246,7 +246,7 @@ register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_24)" register "wake" = "GEVENT_15" register "uart" = "ACPI_UART_RAW_DEVICE(3000000, 64)" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_12)" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_4)" register "enable_delay_ms" = "3" diff --git a/src/mainboard/google/volteer/variants/chronicler/overridetree.cb b/src/mainboard/google/volteer/variants/chronicler/overridetree.cb index 819a05f..017a35d 100644 --- a/src/mainboard/google/volteer/variants/chronicler/overridetree.cb +++ b/src/mainboard/google/volteer/variants/chronicler/overridetree.cb @@ -216,7 +216,7 @@ register "reset_off_delay_ms" = "5" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" register "enable_delay_ms" = "5" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 34 on end end chip drivers/i2c/generic @@ -228,7 +228,7 @@ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" register "reset_delay_ms" = "100" register "reset_off_delay_ms" = "5" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" diff --git a/src/mainboard/google/volteer/variants/elemi/overridetree.cb b/src/mainboard/google/volteer/variants/elemi/overridetree.cb index e4c5a8a..8267867 100644 --- a/src/mainboard/google/volteer/variants/elemi/overridetree.cb +++ b/src/mainboard/google/volteer/variants/elemi/overridetree.cb @@ -229,7 +229,7 @@ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" register "reset_delay_ms" = "100" register "reset_off_delay_ms" = "5" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" diff --git a/src/mainboard/google/volteer/variants/lindar/overridetree.cb b/src/mainboard/google/volteer/variants/lindar/overridetree.cb index d228296..0f04be2 100644 --- a/src/mainboard/google/volteer/variants/lindar/overridetree.cb +++ b/src/mainboard/google/volteer/variants/lindar/overridetree.cb @@ -229,7 +229,7 @@ register "reset_delay_ms" = "20" register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" register "enable_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end diff --git a/src/mainboard/google/volteer/variants/volet/overridetree.cb b/src/mainboard/google/volteer/variants/volet/overridetree.cb index 5ca8a87..1f8a7b2 100644 --- a/src/mainboard/google/volteer/variants/volet/overridetree.cb +++ b/src/mainboard/google/volteer/variants/volet/overridetree.cb @@ -64,7 +64,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/volteer/variants/voxel/overridetree.cb b/src/mainboard/google/volteer/variants/voxel/overridetree.cb index 6c237a9..3a4bb1b 100644 --- a/src/mainboard/google/volteer/variants/voxel/overridetree.cb +++ b/src/mainboard/google/volteer/variants/voxel/overridetree.cb @@ -159,7 +159,7 @@ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" register "enable_delay_ms" = "10" register "enable_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/generic/gpio_keys diff --git a/src/mainboard/google/zork/variants/berknip/overridetree.cb b/src/mainboard/google/zork/variants/berknip/overridetree.cb index 00ab706..3a6c74a 100644 --- a/src/mainboard/google/zork/variants/berknip/overridetree.cb +++ b/src/mainboard/google/zork/variants/berknip/overridetree.cb @@ -152,7 +152,7 @@ # 32ms: Rise time of the reset line # 20ms: Firmware ready time register "reset_delay_ms" = "32 + 20" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/generic @@ -164,7 +164,7 @@ register "enable_delay_ms" = "1" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_140)" register "reset_delay_ms" = "20" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/zork/variants/dalboz/overridetree.cb b/src/mainboard/google/zork/variants/dalboz/overridetree.cb index e3a1f51..ffba885 100644 --- a/src/mainboard/google/zork/variants/dalboz/overridetree.cb +++ b/src/mainboard/google/zork/variants/dalboz/overridetree.cb @@ -52,7 +52,7 @@ # 32ms: Rise time of the reset line # 20ms: Firmware ready time register "reset_delay_ms" = "32 + 20" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/generic @@ -62,7 +62,7 @@ register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_12)" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_140)" register "reset_delay_ms" = "20" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/zork/variants/dirinboz/overridetree.cb b/src/mainboard/google/zork/variants/dirinboz/overridetree.cb index 741baed..f7cdad96 100644 --- a/src/mainboard/google/zork/variants/dirinboz/overridetree.cb +++ b/src/mainboard/google/zork/variants/dirinboz/overridetree.cb @@ -214,7 +214,7 @@ register "reset_delay_ms" = "20" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_144)" register "stop_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/zork/variants/ezkinil/overridetree.cb b/src/mainboard/google/zork/variants/ezkinil/overridetree.cb index 493b97f..dc18940 100644 --- a/src/mainboard/google/zork/variants/ezkinil/overridetree.cb +++ b/src/mainboard/google/zork/variants/ezkinil/overridetree.cb @@ -110,7 +110,7 @@ # 32ms: Rise time of the reset line # 20ms: Firmware ready time register "reset_delay_ms" = "32 + 20" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/zork/variants/gumboz/overridetree.cb b/src/mainboard/google/zork/variants/gumboz/overridetree.cb index 741baed..f7cdad96 100644 --- a/src/mainboard/google/zork/variants/gumboz/overridetree.cb +++ b/src/mainboard/google/zork/variants/gumboz/overridetree.cb @@ -214,7 +214,7 @@ register "reset_delay_ms" = "20" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_144)" register "stop_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/hid diff --git a/src/mainboard/google/zork/variants/shuboz/overridetree.cb b/src/mainboard/google/zork/variants/shuboz/overridetree.cb index 0a898b8..b0ecb49 100644 --- a/src/mainboard/google/zork/variants/shuboz/overridetree.cb +++ b/src/mainboard/google/zork/variants/shuboz/overridetree.cb @@ -149,7 +149,7 @@ register "enable_delay_ms" = "1" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_140)" register "reset_delay_ms" = "300" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/i2c/generic diff --git a/src/mainboard/google/zork/variants/trembyle/overridetree.cb b/src/mainboard/google/zork/variants/trembyle/overridetree.cb index 843c8fb..62d3246 100644 --- a/src/mainboard/google/zork/variants/trembyle/overridetree.cb +++ b/src/mainboard/google/zork/variants/trembyle/overridetree.cb @@ -101,7 +101,7 @@ register "reset_delay_ms" = "32 + 20" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_144)" register "stop_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 39 on end end chip drivers/i2c/generic @@ -111,7 +111,7 @@ register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_12)" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_140)" register "reset_delay_ms" = "20" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end end diff --git a/src/mainboard/google/zork/variants/vilboz/overridetree.cb b/src/mainboard/google/zork/variants/vilboz/overridetree.cb index f4eb635..b1d0c0f 100644 --- a/src/mainboard/google/zork/variants/vilboz/overridetree.cb +++ b/src/mainboard/google/zork/variants/vilboz/overridetree.cb @@ -257,7 +257,7 @@ register "reset_off_delay_ms" = "2" register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_144)" register "stop_off_delay_ms" = "2" - register "has_power_resource" = "1" + register "has_power_resource" = "true" device i2c 10 on end end chip drivers/generic/gpio_keys diff --git a/src/mainboard/intel/adlrvp/devicetree.cb b/src/mainboard/intel/adlrvp/devicetree.cb index 6d89048..74ceca1 100644 --- a/src/mainboard/intel/adlrvp/devicetree.cb +++ b/src/mainboard/intel/adlrvp/devicetree.cb @@ -360,7 +360,7 @@ register "link_freq[0]" = "450000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "0" #IMGCLKOUT_0 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz @@ -411,7 +411,7 @@ register "link_freq[0]" = "450000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz diff --git a/src/mainboard/intel/adlrvp/devicetree_m.cb b/src/mainboard/intel/adlrvp/devicetree_m.cb index d6bf36a..1ee0f32 100644 --- a/src/mainboard/intel/adlrvp/devicetree_m.cb +++ b/src/mainboard/intel/adlrvp/devicetree_m.cb @@ -294,7 +294,7 @@ register "link_freq[0]" = "450000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "0" #IMGCLKOUT_0 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz @@ -345,7 +345,7 @@ register "link_freq[0]" = "450000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz diff --git a/src/mainboard/intel/adlrvp/devicetree_n.cb b/src/mainboard/intel/adlrvp/devicetree_n.cb index 0734057..c3b398d 100644 --- a/src/mainboard/intel/adlrvp/devicetree_n.cb +++ b/src/mainboard/intel/adlrvp/devicetree_n.cb @@ -302,7 +302,7 @@ register "link_freq[0]" = "450000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "0" #IMGCLKOUT_0 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz @@ -353,7 +353,7 @@ register "link_freq[0]" = "450000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz diff --git a/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb b/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb index 1495366..4bcdddd 100644 --- a/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb +++ b/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb @@ -375,7 +375,7 @@ register "acpi_name" = ""CAM0"" register "chip_name" = ""Ov 2740 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "ssdb.lanes_used" = "2" register "num_freq_entries" = "1" @@ -421,7 +421,7 @@ register "link_freq[0]" = "DEFAULT_LINK_FREQ" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_3 register "clk_panel.clks[0].freq" = "1" #19.2 Mhz diff --git a/src/mainboard/intel/mtlrvp/variants/baseboard/mtlrvp_p/devicetree.cb b/src/mainboard/intel/mtlrvp/variants/baseboard/mtlrvp_p/devicetree.cb index 1f78060..45c8f0b 100644 --- a/src/mainboard/intel/mtlrvp/variants/baseboard/mtlrvp_p/devicetree.cb +++ b/src/mainboard/intel/mtlrvp/variants/baseboard/mtlrvp_p/devicetree.cb @@ -443,7 +443,7 @@ register "link_freq[0]" = "560000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "0" register "clk_panel.clks[0].freq" = "1" #19.2 Mhz @@ -482,7 +482,7 @@ register "link_freq[0]" = "560000000" register "remote_name" = ""IPU0"" - register "has_power_resource" = "1" + register "has_power_resource" = "true" #Controls register "clk_panel.clks[0].clknum" = "2" register "clk_panel.clks[0].freq" = "1" #19.2 Mhz diff --git a/util/mainboard/google/puff/template/overridetree.cb b/util/mainboard/google/puff/template/overridetree.cb index 5ccd442..6712659 100644 --- a/util/mainboard/google/puff/template/overridetree.cb +++ b/util/mainboard/google/puff/template/overridetree.cb @@ -389,7 +389,7 @@ register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)" register "stop_delay_ms" = "12" # NIC needs time to quiesce register "stop_off_delay_ms" = "1" - register "has_power_resource" = "1" + register "has_power_resource" = "true" register "device_index" = "0" device pci 00.0 on end end -- To view, visit https://review.coreboot.org/c/coreboot/+/85813?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: I25b86ef577e072cfe3ef5dc2447113f11c51f747 Gerrit-Change-Number: 85813 Gerrit-PatchSet: 2 Gerrit-Owner: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Reviewer: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Reviewer: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Reviewer: Eran Mitrani <mitrani(a)google.com> Gerrit-Reviewer: Eric Lai <ericllai(a)google.com> Gerrit-Reviewer: Jakub Czapiga <czapiga(a)google.com> Gerrit-Reviewer: Jason Nien <jason.nien(a)amd.corp-partner.google.com> Gerrit-Reviewer: Jayvik Desai <jayvik(a)google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Martin Roth <martin.roth(a)amd.corp-partner.google.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Reviewer: Pranava Y N <pranavayn(a)google.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: Tarun <tstuli(a)gmail.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org>

1 0

[XS] Change in coreboot[main]: mb/google/fatcat: Remove unused <stdio.h>
by Elyes Haouas (Code Review) 31 Dec '24

31 Dec '24

Elyes Haouas has submitted this change. ( https://review.coreboot.org/c/coreboot/+/84809?usp=email ) Change subject: mb/google/fatcat: Remove unused <stdio.h> ...................................................................... mb/google/fatcat: Remove unused <stdio.h> Change-Id: Icc83efdd673390794fc443531ae7cc6834076383 Signed-off-by: Elyes Haouas <ehaouas(a)noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84809 Reviewed-by: Nicholas Chin <nic.c3.14(a)gmail.com> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Subrata Banik <subratabanik(a)google.com> --- M src/mainboard/google/fatcat/mainboard.c 1 file changed, 0 insertions(+), 1 deletion(-) Approvals: Subrata Banik: Looks good to me, approved build bot (Jenkins): Verified Nicholas Chin: Looks good to me, approved diff --git a/src/mainboard/google/fatcat/mainboard.c b/src/mainboard/google/fatcat/mainboard.c index 0d1fcd3..f514eb9 100644 --- a/src/mainboard/google/fatcat/mainboard.c +++ b/src/mainboard/google/fatcat/mainboard.c @@ -7,7 +7,6 @@ #include <device/device.h> #include <ec/ec.h> #include <soc/ramstage.h> -#include <stdio.h> #include <stdlib.h> #include <vendorcode/google/chromeos/chromeos.h> -- To view, visit https://review.coreboot.org/c/coreboot/+/84809?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Icc83efdd673390794fc443531ae7cc6834076383 Gerrit-Change-Number: 84809 Gerrit-PatchSet: 5 Gerrit-Owner: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Reviewer: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Reviewer: Nicholas Chin <nic.c3.14(a)gmail.com> Gerrit-Reviewer: Pranava Y N <pranavayn(a)google.com> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org>

1 0

[S] Change in blobs[main]: soc/mediatek/mt8196: Add GPUEB firmware v1.0
by Jarried Lin (Code Review) 31 Dec '24

31 Dec '24

Attention is currently required from: Andy Hsu, Jarried Lin, Yidi Lin. Hello Andy Hsu, Yidi Lin, Yu-Ping Wu, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/blobs/+/85763?usp=email to look at the new patch set (#4). Change subject: soc/mediatek/mt8196: Add GPUEB firmware v1.0 ...................................................................... soc/mediatek/mt8196: Add GPUEB firmware v1.0 Add initial GPUEB firmware. TEST=Build pass BUG=b:317009620 Change-Id: I470f1575beea481cac2dcb5f3eb77587739ff2dc Signed-off-by: Andy.Hsu <andy.hsu(a)mediatek.corp-partner.google.com> --- M soc/mediatek/mt8196/README.md A soc/mediatek/mt8196/gpueb_fw.img A soc/mediatek/mt8196/gpueb_fw.img.md5 A soc/mediatek/mt8196/gpueb_release_notes.txt 4 files changed, 26 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/blobs refs/changes/63/85763/4 -- To view, visit https://review.coreboot.org/c/blobs/+/85763?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newpatchset Gerrit-Project: blobs Gerrit-Branch: main Gerrit-Change-Id: I470f1575beea481cac2dcb5f3eb77587739ff2dc Gerrit-Change-Number: 85763 Gerrit-PatchSet: 4 Gerrit-Owner: Jarried Lin <jarried.lin(a)mediatek.com> Gerrit-Reviewer: Andy Hsu <andy.hsu(a)mediatek.corp-partner.google.com> Gerrit-Reviewer: Yidi Lin <yidilin(a)google.com> Gerrit-Reviewer: Yu-Ping Wu <yupingso(a)google.com> Gerrit-Attention: Andy Hsu <andy.hsu(a)mediatek.corp-partner.google.com> Gerrit-Attention: Yidi Lin <yidilin(a)google.com> Gerrit-Attention: Jarried Lin <jarried.lin(a)mediatek.com>

1 0

[S] Change in blobs[main]: soc/mediatek/mt8196: Add GPUEB firmware v1.0
by Jarried Lin (Code Review) 31 Dec '24

31 Dec '24

Attention is currently required from: Andy Hsu, Jarried Lin, Yidi Lin. Hello Andy Hsu, Yidi Lin, Yu-Ping Wu, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/blobs/+/85763?usp=email to look at the new patch set (#3). Change subject: soc/mediatek/mt8196: Add GPUEB firmware v1.0 ...................................................................... soc/mediatek/mt8196: Add GPUEB firmware v1.0 Add initial GPUEB firmware. TEST=Build pass BUG=b:317009620 Change-Id: I470f1575beea481cac2dcb5f3eb77587739ff2dc Signed-off-by: Andy.Hsu <andy.hsu(a)mediatek.corp-partner.google.com> --- M soc/mediatek/mt8196/README.md A soc/mediatek/mt8196/gpueb_fw.img A soc/mediatek/mt8196/gpueb_fw.img.md5 A soc/mediatek/mt8196/gpueb_release_notes.txt 4 files changed, 26 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/blobs refs/changes/63/85763/3 -- To view, visit https://review.coreboot.org/c/blobs/+/85763?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newpatchset Gerrit-Project: blobs Gerrit-Branch: main Gerrit-Change-Id: I470f1575beea481cac2dcb5f3eb77587739ff2dc Gerrit-Change-Number: 85763 Gerrit-PatchSet: 3 Gerrit-Owner: Jarried Lin <jarried.lin(a)mediatek.com> Gerrit-Reviewer: Andy Hsu <andy.hsu(a)mediatek.corp-partner.google.com> Gerrit-Reviewer: Yidi Lin <yidilin(a)google.com> Gerrit-Reviewer: Yu-Ping Wu <yupingso(a)google.com> Gerrit-Attention: Andy Hsu <andy.hsu(a)mediatek.corp-partner.google.com> Gerrit-Attention: Yidi Lin <yidilin(a)google.com> Gerrit-Attention: Jarried Lin <jarried.lin(a)mediatek.com>

1 0

[XS] Change in coreboot[main]: mb/google/nissa/var/rull: Configure Acoustic noise mitigation
by Elyes Haouas (Code Review) 31 Dec '24

31 Dec '24

Attention is currently required from: Dinesh Gehlot, Jayvik Desai, Kapil Porwal, Kun Liu, Nick Vaccaro, Rui Zhou. Elyes Haouas has posted comments on this change by Rui Zhou. ( https://review.coreboot.org/c/coreboot/+/85798?usp=email ) Change subject: mb/google/nissa/var/rull: Configure Acoustic noise mitigation ...................................................................... Patch Set 2: Code-Review+2 -- To view, visit https://review.coreboot.org/c/coreboot/+/85798?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Ib7f60f1248c6b46f4f9bac1731be4f0396766ae2 Gerrit-Change-Number: 85798 Gerrit-PatchSet: 2 Gerrit-Owner: Rui Zhou <zhourui(a)huaqin.corp-partner.google.com> Gerrit-Reviewer: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Reviewer: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Reviewer: Eric Lai <ericllai(a)google.com> Gerrit-Reviewer: Jayvik Desai <jayvik(a)google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Kun Liu <liukun11(a)huaqin.corp-partner.google.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Jayvik Desai <jayvik(a)google.com> Gerrit-Attention: Rui Zhou <zhourui(a)huaqin.corp-partner.google.com> Gerrit-Attention: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Attention: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Attention: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Attention: Kun Liu <liukun11(a)huaqin.corp-partner.google.com> Gerrit-Comment-Date: Tue, 31 Dec 2024 02:39:55 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes

1 0

[S] Change in blobs[main]: soc/mediatek/mt8196: Add GPUEB firmware v1.0
by Jarried Lin (Code Review) 31 Dec '24

31 Dec '24

Attention is currently required from: Andy Hsu, Jarried Lin, Yidi Lin. Hello Andy Hsu, Yidi Lin, Yu-Ping Wu, I'd like you to reexamine a change. Please visit https://review.coreboot.org/c/blobs/+/85763?usp=email to look at the new patch set (#2). The following approvals got outdated and were removed: Code-Review+1 by Yidi Lin Change subject: soc/mediatek/mt8196: Add GPUEB firmware v1.0 ...................................................................... soc/mediatek/mt8196: Add GPUEB firmware v1.0 Add initial GPUEB firmware. TEST=Build pass BUG=b:317009620 Change-Id: I470f1575beea481cac2dcb5f3eb77587739ff2dc Signed-off-by: Andy.Hsu <andy.hsu(a)mediatek.corp-partner.google.com> --- M soc/mediatek/mt8196/README.md A soc/mediatek/mt8196/gpueb_fw.img A soc/mediatek/mt8196/gpueb_fw.img.md5 A soc/mediatek/mt8196/gpueb_release_notes.txt 4 files changed, 28 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/blobs refs/changes/63/85763/2 -- To view, visit https://review.coreboot.org/c/blobs/+/85763?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: newpatchset Gerrit-Project: blobs Gerrit-Branch: main Gerrit-Change-Id: I470f1575beea481cac2dcb5f3eb77587739ff2dc Gerrit-Change-Number: 85763 Gerrit-PatchSet: 2 Gerrit-Owner: Jarried Lin <jarried.lin(a)mediatek.com> Gerrit-Reviewer: Andy Hsu <andy.hsu(a)mediatek.corp-partner.google.com> Gerrit-Reviewer: Yidi Lin <yidilin(a)google.com> Gerrit-Reviewer: Yu-Ping Wu <yupingso(a)google.com> Gerrit-Attention: Andy Hsu <andy.hsu(a)mediatek.corp-partner.google.com> Gerrit-Attention: Yidi Lin <yidilin(a)google.com> Gerrit-Attention: Jarried Lin <jarried.lin(a)mediatek.com>

1 0

[XS] Change in coreboot[main]: mb/google/nissa/var/rull: Configure Acoustic noise mitigation
by Rui Zhou (Code Review) 31 Dec '24

31 Dec '24

Attention is currently required from: Dinesh Gehlot, Elyes Haouas, Jayvik Desai, Kapil Porwal, Kun Liu, Nick Vaccaro. Rui Zhou has posted comments on this change by Rui Zhou. ( https://review.coreboot.org/c/coreboot/+/85798?usp=email ) Change subject: mb/google/nissa/var/rull: Configure Acoustic noise mitigation ...................................................................... Patch Set 2: (1 comment) File src/mainboard/google/brya/variants/rull/overridetree.cb: https://review.coreboot.org/c/coreboot/+/85798/comment/dff8b9e3_7ebfccc8?us… : PS1, Line 19: fast_pkg_c_ramp_disable > yes, I have :) […] Done -- To view, visit https://review.coreboot.org/c/coreboot/+/85798?usp=email To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings?usp=email Gerrit-MessageType: comment Gerrit-Project: coreboot Gerrit-Branch: main Gerrit-Change-Id: Ib7f60f1248c6b46f4f9bac1731be4f0396766ae2 Gerrit-Change-Number: 85798 Gerrit-PatchSet: 2 Gerrit-Owner: Rui Zhou <zhourui(a)huaqin.corp-partner.google.com> Gerrit-Reviewer: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Reviewer: Eric Lai <ericllai(a)google.com> Gerrit-Reviewer: Jayvik Desai <jayvik(a)google.com> Gerrit-Reviewer: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Reviewer: Kun Liu <liukun11(a)huaqin.corp-partner.google.com> Gerrit-Reviewer: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Reviewer: Subrata Banik <subratabanik(a)google.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Attention: Jayvik Desai <jayvik(a)google.com> Gerrit-Attention: Kapil Porwal <kapilporwal(a)google.com> Gerrit-Attention: Dinesh Gehlot <digehlot(a)google.com> Gerrit-Attention: Nick Vaccaro <nvaccaro(a)chromium.org> Gerrit-Attention: Kun Liu <liukun11(a)huaqin.corp-partner.google.com> Gerrit-Attention: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Comment-Date: Tue, 31 Dec 2024 02:34:09 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Rui Zhou <zhourui(a)huaqin.corp-partner.google.com> Comment-In-Reply-To: Elyes Haouas <ehaouas(a)noos.fr>

1 0

← Newer
1
...
6
7
8
9
10
11
12
...
302
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit December 2024