coreboot-gerrit November 2022

coreboot-gerrit@coreboot.org

1 participants
7286 discussions

[XL] Change in coreboot[master]: mb/aopen/dxplplusu: Remove board
by Arthur Heymans (Code Review) 07 Nov '22

07 Nov '22

Arthur Heymans has submitted this change. ( https://review.coreboot.org/c/coreboot/+/69114 ) Change subject: mb/aopen/dxplplusu: Remove board ...................................................................... mb/aopen/dxplplusu: Remove board This board use the LEGACY_SMP_INIT which is to be deprecated after release 4.18. Change-Id: Idf37ade31ddb55697df1a65062c092a0a485e175 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69114 Reviewed-by: Elyes Haouas <ehaouas(a)noos.fr> Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/arch/x86/smbios.c M src/cpu/intel/Kconfig M src/cpu/intel/Makefile.inc D src/cpu/intel/model_f2x/Kconfig D src/cpu/intel/model_f2x/Makefile.inc D src/cpu/intel/model_f2x/model_f2x_init.c D src/cpu/intel/socket_mPGA604/Kconfig D src/cpu/intel/socket_mPGA604/Makefile.inc M src/cpu/x86/Kconfig M src/cpu/x86/smm/smmrelocate.S D src/mainboard/aopen/Kconfig D src/mainboard/aopen/Kconfig.name D src/mainboard/aopen/dxplplusu/Kconfig D src/mainboard/aopen/dxplplusu/Kconfig.name D src/mainboard/aopen/dxplplusu/Makefile.inc D src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl D src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl D src/mainboard/aopen/dxplplusu/acpi/i82801db.asl D src/mainboard/aopen/dxplplusu/acpi/p64h2.asl D src/mainboard/aopen/dxplplusu/acpi/power.asl D src/mainboard/aopen/dxplplusu/acpi/scsi.asl D src/mainboard/aopen/dxplplusu/acpi/superio.asl D src/mainboard/aopen/dxplplusu/acpi_tables.c D src/mainboard/aopen/dxplplusu/board_info.txt D src/mainboard/aopen/dxplplusu/bootblock.c D src/mainboard/aopen/dxplplusu/devicetree.cb D src/mainboard/aopen/dxplplusu/dsdt.asl D src/northbridge/intel/e7505/Kconfig D src/northbridge/intel/e7505/Makefile.inc D src/northbridge/intel/e7505/e7505.h D src/northbridge/intel/e7505/memmap.c D src/northbridge/intel/e7505/northbridge.c D src/northbridge/intel/e7505/raminit.c D src/northbridge/intel/e7505/raminit.h D src/northbridge/intel/e7505/romstage.c M src/southbridge/intel/common/smbus.c D src/southbridge/intel/i82801dx/Kconfig D src/southbridge/intel/i82801dx/Makefile.inc D src/southbridge/intel/i82801dx/ac97.c D src/southbridge/intel/i82801dx/bootblock.c D src/southbridge/intel/i82801dx/chip.h D src/southbridge/intel/i82801dx/early_smbus.c D src/southbridge/intel/i82801dx/fadt.c D src/southbridge/intel/i82801dx/i82801dx.c D src/southbridge/intel/i82801dx/i82801dx.h D src/southbridge/intel/i82801dx/ide.c D src/southbridge/intel/i82801dx/lpc.c D src/southbridge/intel/i82801dx/pci.c D src/southbridge/intel/i82801dx/smi.c D src/southbridge/intel/i82801dx/smihandler.c D src/southbridge/intel/i82801dx/usb.c D src/southbridge/intel/i82801dx/usb2.c D src/southbridge/intel/i82870/82870.h D src/southbridge/intel/i82870/Kconfig D src/southbridge/intel/i82870/Makefile.inc D src/southbridge/intel/i82870/ioapic.c D src/southbridge/intel/i82870/pcibridge.c M src/superio/smsc/Makefile.inc D src/superio/smsc/lpc47m10x/Kconfig D src/superio/smsc/lpc47m10x/Makefile.inc D src/superio/smsc/lpc47m10x/early_serial.c D src/superio/smsc/lpc47m10x/lpc47m10x.h D src/superio/smsc/lpc47m10x/superio.c 63 files changed, 20 insertions(+), 5,323 deletions(-) Approvals: build bot (Jenkins): Verified Elyes Haouas: Looks good to me, but someone else must approve Angel Pons: Looks good to me, approved diff --git a/src/arch/x86/smbios.c b/src/arch/x86/smbios.c index 24b18f2..17a37ea 100644 --- a/src/arch/x86/smbios.c +++ b/src/arch/x86/smbios.c @@ -382,8 +382,6 @@ { if (CONFIG(CPU_INTEL_SLOT_1)) return 0x08; - if (CONFIG(CPU_INTEL_SOCKET_MPGA604)) - return 0x13; if (CONFIG(CPU_INTEL_SOCKET_LGA775)) return 0x15; if (CONFIG(XEON_SP_COMMON_BASE)) diff --git a/src/cpu/intel/Kconfig b/src/cpu/intel/Kconfig index 43b360b..62f8841 100644 --- a/src/cpu/intel/Kconfig +++ b/src/cpu/intel/Kconfig @@ -10,7 +10,6 @@ source "src/cpu/intel/model_106cx/Kconfig" source "src/cpu/intel/model_206ax/Kconfig" source "src/cpu/intel/model_2065x/Kconfig" -source "src/cpu/intel/model_f2x/Kconfig" source "src/cpu/intel/model_f3x/Kconfig" source "src/cpu/intel/model_f4x/Kconfig" source "src/cpu/intel/haswell/Kconfig" @@ -20,7 +19,6 @@ source "src/cpu/intel/socket_FCBGA559/Kconfig" source "src/cpu/intel/socket_m/Kconfig" source "src/cpu/intel/socket_p/Kconfig" -source "src/cpu/intel/socket_mPGA604/Kconfig" source "src/cpu/intel/socket_441/Kconfig" source "src/cpu/intel/socket_LGA775/Kconfig" # Architecture specific features diff --git a/src/cpu/intel/Makefile.inc b/src/cpu/intel/Makefile.inc index 01913de..9202522 100644 --- a/src/cpu/intel/Makefile.inc +++ b/src/cpu/intel/Makefile.inc @@ -9,7 +9,6 @@ subdirs-$(CONFIG_CPU_INTEL_SOCKET_FCBGA559) += socket_FCBGA559 subdirs-$(CONFIG_CPU_INTEL_SOCKET_M) += socket_m subdirs-$(CONFIG_CPU_INTEL_SOCKET_P) += socket_p -subdirs-$(CONFIG_CPU_INTEL_SOCKET_MPGA604) += socket_mPGA604 subdirs-$(CONFIG_CPU_INTEL_MODEL_2065X) += model_2065x subdirs-$(CONFIG_CPU_INTEL_MODEL_206AX) += model_206ax subdirs-$(CONFIG_CPU_INTEL_HASWELL) += haswell diff --git a/src/cpu/intel/model_f2x/Kconfig b/src/cpu/intel/model_f2x/Kconfig deleted file mode 100644 index eb11a33..0000000 --- a/src/cpu/intel/model_f2x/Kconfig +++ /dev/null @@ -1,7 +0,0 @@ -config CPU_INTEL_MODEL_F2X - bool - select ARCH_X86 - select SUPPORT_CPU_UCODE_IN_CBFS - select SMM_ASEG - select CPU_INTEL_COMMON - select SSE2 diff --git a/src/cpu/intel/model_f2x/Makefile.inc b/src/cpu/intel/model_f2x/Makefile.inc deleted file mode 100644 index fa1b51a..0000000 --- a/src/cpu/intel/model_f2x/Makefile.inc +++ /dev/null @@ -1,6 +0,0 @@ -subdirs-y += ../common -subdirs-y += ../hyperthreading - -ramstage-y += model_f2x_init.c - -cpu_microcode_bins += $(wildcard 3rdparty/intel-microcode/intel-ucode/0f-02-*) diff --git a/src/cpu/intel/model_f2x/model_f2x_init.c b/src/cpu/intel/model_f2x/model_f2x_init.c deleted file mode 100644 index 294d579..0000000 --- a/src/cpu/intel/model_f2x/model_f2x_init.c +++ /dev/null @@ -1,46 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <device/device.h> -#include <cpu/cpu.h> -#include <cpu/x86/mtrr.h> -#include <cpu/intel/microcode.h> -#include <cpu/intel/hyperthreading.h> -#include <cpu/intel/common/common.h> -#include <cpu/x86/cache.h> - -static void model_f2x_init(struct device *cpu) -{ - /* Turn on caching if we haven't already */ - enable_cache(); - - if (!intel_ht_sibling()) { - /* MTRRs are shared between threads */ - x86_setup_mtrrs(); - x86_mtrr_check(); - - /* Update the microcode */ - intel_update_microcode_from_cbfs(); - } - - /* Start up my CPU siblings */ - intel_sibling_init(cpu); -}; - -static struct device_operations cpu_dev_ops = { - .init = model_f2x_init, -}; - -static const struct cpu_device_id cpu_table[] = { - { X86_VENDOR_INTEL, 0x0f22 }, - { X86_VENDOR_INTEL, 0x0f24 }, - { X86_VENDOR_INTEL, 0x0f25 }, - { X86_VENDOR_INTEL, 0x0f26 }, - { X86_VENDOR_INTEL, 0x0f27 }, - { X86_VENDOR_INTEL, 0x0f29 }, - { 0, 0 }, -}; - -static const struct cpu_driver driver __cpu_driver = { - .ops = &cpu_dev_ops, - .id_table = cpu_table, -}; diff --git a/src/cpu/intel/socket_mPGA604/Kconfig b/src/cpu/intel/socket_mPGA604/Kconfig deleted file mode 100644 index 7b08699..0000000 --- a/src/cpu/intel/socket_mPGA604/Kconfig +++ /dev/null @@ -1,36 +0,0 @@ -config CPU_INTEL_SOCKET_MPGA604 - bool - -if CPU_INTEL_SOCKET_MPGA604 - -config SOCKET_SPECIFIC_OPTIONS - def_bool y - select CPU_INTEL_MODEL_F2X - select MMX - select SSE - select UDELAY_TSC - select TSC_MONOTONIC_TIMER - select SIPI_VECTOR_IN_ROM - select CPU_INTEL_COMMON - select CPU_INTEL_COMMON_TIMEBASE - -# mPGA604 are usually Intel Netburst CPUs which should have SSE2 -# but the ramtest.c code on the Dell S1850 seems to choke on -# enabling it, so disable it for now. -config SSE2 - bool - default n - -config DCACHE_RAM_BASE - hex - default 0xfefc0000 - -config DCACHE_RAM_SIZE - hex - default 0x4000 - -config DCACHE_BSP_STACK_SIZE - hex - default 0x2000 - -endif # CPU_INTEL_SOCKET_MPGA604 diff --git a/src/cpu/intel/socket_mPGA604/Makefile.inc b/src/cpu/intel/socket_mPGA604/Makefile.inc deleted file mode 100644 index f9dfc67..0000000 --- a/src/cpu/intel/socket_mPGA604/Makefile.inc +++ /dev/null @@ -1,9 +0,0 @@ -subdirs-y += ../model_f2x -subdirs-y += ../../x86/lapic -subdirs-y += ../microcode - -bootblock-y += ../car/p4-netburst/cache_as_ram.S -bootblock-y += ../car/bootblock.c - -postcar-y += ../car/p4-netburst/exit_car.S -romstage-y += ../car/romstage.c diff --git a/src/cpu/x86/Kconfig b/src/cpu/x86/Kconfig index ec7482c..3a0c29b 100644 --- a/src/cpu/x86/Kconfig +++ b/src/cpu/x86/Kconfig @@ -183,7 +183,7 @@ bool default y if NORTHBRIDGE_INTEL_I945 || NORTHBRIDGE_INTEL_GM45 \ || NORTHBRIDGE_INTEL_X4X || NORTHBRIDGE_INTEL_PINEVIEW \ - || NORTHBRIDGE_INTEL_E7505 || NORTHBRIDGE_INTEL_IRONLAKE + || NORTHBRIDGE_INTEL_IRONLAKE default n config X86_AMD_FIXED_MTRRS diff --git a/src/cpu/x86/smm/smmrelocate.S b/src/cpu/x86/smm/smmrelocate.S index f7dcc39..b89cf3d 100644 --- a/src/cpu/x86/smm/smmrelocate.S +++ b/src/cpu/x86/smm/smmrelocate.S @@ -4,9 +4,7 @@ // can it be cleaned up so this include is not required? // It's needed right now because we get our DEFAULT_PMBASE from // here. -#if CONFIG(SOUTHBRIDGE_INTEL_I82801DX) -#include <southbridge/intel/i82801dx/i82801dx.h> -#elif CONFIG(SOUTHBRIDGE_INTEL_I82801IX) +#if CONFIG(SOUTHBRIDGE_INTEL_I82801IX) #include <southbridge/intel/i82801ix/i82801ix.h> #else #error "Southbridge needs SMM handler support." diff --git a/src/mainboard/aopen/Kconfig b/src/mainboard/aopen/Kconfig deleted file mode 100644 index 754bab0..0000000 --- a/src/mainboard/aopen/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if VENDOR_AOPEN - -choice - prompt "Mainboard model" - -source "src/mainboard/aopen/*/Kconfig.name" - -endchoice - -source "src/mainboard/aopen/*/Kconfig" - -config MAINBOARD_VENDOR - default "AOpen" - -endif # VENDOR_AOPEN diff --git a/src/mainboard/aopen/Kconfig.name b/src/mainboard/aopen/Kconfig.name deleted file mode 100644 index 01ea2b6..0000000 --- a/src/mainboard/aopen/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config VENDOR_AOPEN - bool "AOpen" diff --git a/src/mainboard/aopen/dxplplusu/Kconfig b/src/mainboard/aopen/dxplplusu/Kconfig deleted file mode 100644 index 5c0ca2b..0000000 --- a/src/mainboard/aopen/dxplplusu/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -if BOARD_AOPEN_DXPLPLUSU - -config BOARD_SPECIFIC_OPTIONS - def_bool y - select CPU_INTEL_SOCKET_MPGA604 - select NORTHBRIDGE_INTEL_E7505 - select SOUTHBRIDGE_INTEL_I82870 - select SOUTHBRIDGE_INTEL_I82801DX - select SUPERIO_SMSC_LPC47M10X - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_2048 - -config MAINBOARD_DIR - default "aopen/dxplplusu" - -config MAINBOARD_PART_NUMBER - default "DXPL Plus-U" - -config IRQ_SLOT_COUNT - int - default 12 - -config MAX_CPUS - int - default 4 - -endif # BOARD_AOPEN_DXPLPLUSU diff --git a/src/mainboard/aopen/dxplplusu/Kconfig.name b/src/mainboard/aopen/dxplplusu/Kconfig.name deleted file mode 100644 index 1310203..0000000 --- a/src/mainboard/aopen/dxplplusu/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_AOPEN_DXPLPLUSU - bool "DXPL Plus-U" diff --git a/src/mainboard/aopen/dxplplusu/Makefile.inc b/src/mainboard/aopen/dxplplusu/Makefile.inc deleted file mode 100644 index d604d02..0000000 --- a/src/mainboard/aopen/dxplplusu/Makefile.inc +++ /dev/null @@ -1,3 +0,0 @@ -## SPDX-License-Identifier: GPL-2.0-only - -bootblock-y += bootblock.c diff --git a/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl b/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl deleted file mode 100644 index aab3271..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl +++ /dev/null @@ -1,68 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -Device (MBRS) -{ - Name (_HID, EisaId ("PNP0C01")) - Name (_UID, 0x01) - Name (MSBF, ResourceTemplate () - { - /* System memory */ - QWordMemory (ResourceProducer, PosDecode, MinFixed, - MaxNotFixed, Prefetchable, ReadWrite, - 0x0, 0x100000000, 0x400000000, 0x0, 0x0, ,, _Y1C, - AddressRangeMemory, TypeStatic) - - /* Top Of Low Memory */ - Memory32 (ReadOnly, 0x0, 0x0, 0x1, 0x0, _Y1D) - - /* 640kB who wants more? */ - Memory32Fixed (ReadWrite, 0x0, 0xA0000, ) - - /* 64k BIOS bootblock */ - Memory32Fixed (ReadOnly, 0xF0000, 0x10000,) - - /* ISA memory hole 15-16 MB ? */ - /* Memory32Fixed (ReadOnly, 0x100000, 0xF00000,) */ - /* ISA memory hole 14-15 MB ? */ - /* Memory32Fixed (ReadOnly, 0x100000, 0xE00000,) */ - - /* Local APIC */ - Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000,) - }) - - Method (_CRS, 0, NotSerialized) - { - CreateQWordField (MSBF, \_SB.MBRS._Y1C._MIN, MEML) - CreateQWordField (MSBF, \_SB.MBRS._Y1C._MAX, MEMM) - CreateQWordField (MSBF, \_SB.MBRS._Y1C._LEN, LELM) - - And (\_SB.PCI0.RLAR, 0x03FF, Local1) - Local1++ - If (Local1 > 0x40) - { - ShiftLeft (Local1, 0x1A, LELM) - } - - - CreateDWordField (MSBF, \_SB.MBRS._Y1D._MIN, MS00) - CreateDWordField (MSBF, \_SB.MBRS._Y1D._MAX, MS01) - CreateDWordField (MSBF, \_SB.MBRS._Y1D._LEN, MEM2) - And (\_SB.PCI0.TOLM, 0xF800, Local1) - ShiftRight (Local1, 0x04, Local1) - Local1-- - If (Local1 > 0x10) - { - Local1 -= 0x0F - Store (ShiftLeft (Local1, 0x14), MEM2) - Store (0x01000000, MS00) - Store (MS00, MS01) - } - - Return (MSBF) - } - - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } -} diff --git a/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl b/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl deleted file mode 100644 index 400a5d7..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl +++ /dev/null @@ -1,56 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <arch/ioapic.h> - -Name (PBRS, ResourceTemplate () -{ - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, 0x0000, 0x00FF, 0x0000, 0x0100, ,, ) - - /* System IO */ - DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0, 0x0, 0xffff, 0x0000, 0x10000, ,,, TypeStatic) - IO (Decode16, 0x0CF8, 0x0CF8, 0x08, 0x08, ) - - /* Video RAM */ - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, 0x000A0000, 0x000BFFFF, - 0x00000000, 0x00020000, ,,, AddressRangeMemory, TypeStatic) - - /* Video ROM */ - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, 0x000C0000, 0x000C7FFF, - 0x00000000, 0x00008000, ,,, AddressRangeMemory, TypeStatic) - - /* Option ROMs ? */ - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, 0x000C8000, 0x000DFFFF, - 0x00000000, 0x00018000, ,,, AddressRangeMemory, TypeStatic) - - /* Top Of Lowmemory to IOAPIC */ - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, 0x00000000, 0xFEBFFFFF, - 0x00000000, IO_APIC_ADDR, ,, _Y08, AddressRangeMemory, TypeStatic) -}) - - -Method (_CRS, 0, NotSerialized) -{ - - /* Top Of Lowmemory to IOAPIC */ - CreateDWordField (PBRS, \_SB.PCI0._Y08._MIN, MEML) - CreateDWordField (PBRS, \_SB.PCI0._Y08._MAX, MEMH) - CreateDWordField (PBRS, \_SB.PCI0._Y08._LEN, LENM) - And (\_SB.PCI0.TOLM, 0xF800, Local1) - ShiftRight (Local1, 0x04, Local1) - ShiftLeft (Local1, 0x14, MEML) - MEMH = IO_APIC_ADDR - 1 - LENM = IO_APIC_ADDR - MEML - - Return (PBRS) -} - -Method (_STA, 0, NotSerialized) -{ - Return (0x0F) -} diff --git a/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl b/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl deleted file mode 100644 index 9b16070..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl +++ /dev/null @@ -1,166 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <arch/ioapic.h> - -Device (USB0) -{ - Name (_ADR, 0x001D0000) - Name (_PRW, Package () { 0x03, 0x05 }) - - OperationRegion (USBS, PCI_Config, 0x00, 0x0100) - Field (USBS, ByteAcc, NoLock, Preserve) - { - Offset (0xC4), URES, 8 - } -} - -Device (USB1) -{ - Name (_ADR, 0x001D0001) - Name (_PRW, Package () { 0x04, 0x05 }) - OperationRegion (USBS, PCI_Config, 0x00, 0x0100) - Field (USBS, ByteAcc, NoLock, Preserve) - { - Offset (0xC4), URES, 8 - } -} - -Device (USB2) -{ - Name (_ADR, 0x001D0002) - Name (_PRW, Package () { 0x0C, 0x05 }) - OperationRegion (USBS, PCI_Config, 0x00, 0x0100) - Field (USBS, ByteAcc, NoLock, Preserve) - { - Offset (0xC4), URES, 8 - } -} - -Device (USB3) -{ - Name (_ADR, 0x001D0007) - Name (_PRW, Package () { 0x0D, 0x05 }) /* PME_B0_STS any 0:1d or 0:1f device */ - OperationRegion (USBS, PCI_Config, 0x00, 0x0100) - Field (USBS, ByteAcc, NoLock, Preserve) - { - Offset (0xC4), URES, 8 - } -} - -Device(PCI5) -{ - Name (_ADR, 0x001E0000) - Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ - Name (_PRT, Package() { - Package() { 0x0003ffff, 0, 0, 20 }, - Package() { 0x0003ffff, 1, 0, 21 }, - Package() { 0x0003ffff, 2, 0, 22 }, - Package() { 0x0003ffff, 3, 0, 23 }, - }) -} - -Device (ICH0) -{ - Name (_ADR, 0x001F0000) - OperationRegion (D310, PCI_Config, 0x00, 0xFF) - Field (D310, ByteAcc, NoLock, Preserve) - { - Offset (0x40), PBAR, 16, - Offset (0x58), GBAR, 16, - } - - OperationRegion (ACPI, SystemIO, 0x0400, 0xC0) - Field (ACPI, ByteAcc, NoLock, Preserve) - { - PS1L, 8, - PS1H, 8, - PE1L, 8, - PE1H, 8, - - Offset (0x28), - GS0L, 8, - GS0H, 8, - GSPL, 8, - GSPH, 8, - GE0L, 8, - GE0H, 8, - GEPL, 8, - GEPH, 8, - - Offset (0xB8), - GPLV, 8 - } - - Name (MSBF, ResourceTemplate () - { - /* IOAPIC 0 */ - Memory32Fixed (ReadWrite, IO_APIC_ADDR, 0x00001000,) - - IO (Decode16, 0x0, 0x0, 0x80, 0x0, PMIO) - IO (Decode16, 0x0, 0x0, 0x40, 0x0, GPIO) - - /* 8254 legacy irq */ - IO (Decode16, 0x04D0, 0x04D0, 0x02, 0x02,) - - /* reset generator */ - IO (Decode16, 0x0092, 0x0092, 0x01, 0x01, ) - }) - - Method (_CRS, 0, NotSerialized) - { - CreateWordField (MSBF, \_SB_.PCI0.ICH0.PMIO._MIN, IOA1) - CreateWordField (MSBF, \_SB_.PCI0.ICH0.PMIO._MAX, IOA2) - CreateByteField (MSBF, \_SB_.PCI0.ICH0.PMIO._LEN, IOAL) - - Store (PBAR, Local0) - If (Local0 && 1) - { - And (Local0, 0xFFFE, Local0) - Store (Local0, IOA1) - Store (Local0, IOA2) - Store (0x80, IOAL) - } Else { - Store (0x00, IOAL) - } - - CreateWordField (MSBF, \_SB_.PCI0.ICH0.GPIO._MIN, IOS1) - CreateWordField (MSBF, \_SB_.PCI0.ICH0.GPIO._MAX, IOS2) - CreateByteField (MSBF, \_SB_.PCI0.ICH0.GPIO._LEN, IOSL) - - Store (GBAR, Local0) - If (Local0 && 1) { - And (Local0, 0xFFFE, Local0) - Store (Local0, IOS1) - Store (Local0, IOS2) - Store (0x40, IOSL) - } Else { - Store (0x00, IOSL) - } - Return (MSBF) - } - - Device (FWH) - { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - - - Name (MSBG, ResourceTemplate () { - Memory32Fixed (ReadOnly, 0xFFF00000, 0x00080000,) - Memory32Fixed (ReadOnly, 0xFFF80000, 0x00080000,) - }) - - Method (_CRS, 0, NotSerialized) - { - Return (MSBG) - } - } - - Device (SMSC) - { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x02) - #include "acpi/superio.asl" - } - -} diff --git a/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl b/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl deleted file mode 100644 index 9a3e1b5..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl +++ /dev/null @@ -1,76 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* Interrupt routing for PCI 03:xx.x */ - -/* I/O APIC id 0x3 */ -Device(PBIO) -{ - Name (_ADR, 0x001c0000) -} - -/* PCI-X bridge */ -Device(P64B) -{ - Name (_ADR, 0x001d0000) - Name (_PRT, Package() { - Package() { 0x0002ffff, 0, 0, 24 }, /* PCI-X slot 1 */ - Package() { 0x0002ffff, 1, 0, 25 }, - Package() { 0x0002ffff, 2, 0, 26 }, - Package() { 0x0002ffff, 3, 0, 27 }, - Package() { 0x0003ffff, 0, 0, 28 }, /* PCI-X slot 2 */ - Package() { 0x0003ffff, 1, 0, 29 }, - Package() { 0x0003ffff, 2, 0, 30 }, - Package() { 0x0003ffff, 3, 0, 31 }, - Package() { 0x0004ffff, 0, 0, 32 }, /* On-board GbE */ - }) - - Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ - OperationRegion (PBPC, PCI_Config, 0x00, 0xFF) - Field (PBPC, ByteAcc, NoLock, Preserve) - { - Offset (0x3E), BCRL, 8, BCRH, 8 - } - - - Device (ETH0) - { - Name (_ADR, 0x00040000) - Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ - } -} - - -/* Interrupt routing for PCI 04:xx.x */ - -/* I/O APIC id 0x4 */ -Device(PAIO) -{ - Name (_ADR, 0x001e0000) -} - -/* PCI-X bridge */ -Device(P64A) -{ - Name (_ADR, 0x001f0000) - Name (_PRT, Package() { - Package() { 0x0002ffff, 0, 0, 48 }, /* PCI-X slot 3 */ - Package() { 0x0002ffff, 1, 0, 49 }, - Package() { 0x0002ffff, 2, 0, 50 }, - Package() { 0x0002ffff, 3, 0, 51 }, - Package() { 0x0003ffff, 0, 0, 52 }, /* PCI-X slot 4 */ - Package() { 0x0003ffff, 1, 0, 53 }, - Package() { 0x0003ffff, 2, 0, 54 }, - Package() { 0x0003ffff, 3, 0, 55 }, - Package() { 0x0004ffff, 0, 0, 54 }, /* On-board SCSI, GSI not 56 ? */ - Package() { 0x0004ffff, 1, 0, 55 }, /* On-board SCSI, GSI not 57 */ - }) - - Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ - OperationRegion (PBPC, PCI_Config, 0x00, 0xFF) - Field (PBPC, ByteAcc, NoLock, Preserve) - { - Offset (0x3E), BCRL, 8, BCRH, 8 - } - - #include "acpi/scsi.asl" -} diff --git a/src/mainboard/aopen/dxplplusu/acpi/power.asl b/src/mainboard/aopen/dxplplusu/acpi/power.asl deleted file mode 100644 index 903d844..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/power.asl +++ /dev/null @@ -1,71 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - - -/* Board powers on with button or PME# from on-board GbE wake-on-lan. - * Board shuts down to S5/G2. Any other power management is untested. - */ - -Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) -Name (\_S1, Package () { 0x01, 0x01, 0x00, 0x00 }) -Name (\_S3, Package () { 0x05, 0x05, 0x00, 0x00 }) -Name (\_S4, Package () { 0x06, 0x06, 0x00, 0x00 }) -Name (\_S5, Package () { 0x07, 0x07, 0x00, 0x00 }) - -Scope (\_GPE) -{ - Method (_L03, 0, NotSerialized) - { - Notify (\_SB.PCI0.USB0, 0x02) - } - Method (_L04, 0, NotSerialized) - { - Notify (\_SB.PCI0.USB1, 0x02) - } - - /* WOL header */ - Method (_L08, 0, NotSerialized) - { - Notify (\_SB.PCI0.PCI5, 0x02) - Notify (\_SB.SLBT, 0x02) - } - - /* PME# */ - Method (_L0B, 0, NotSerialized) - { - Notify (\_SB.LID0, 0x02) - } - - Method (_L0C, 0, NotSerialized) - { - Notify (\_SB.PCI0.USB2, 0x02) - } - - /* PME_B0_STS# */ - Method (_L0D, 0, NotSerialized) - { - Notify (\_SB.PCI0.USB3, 0x02) - } -} - -/* Clear power buttons */ -Method (\_INI, 0, NotSerialized) -{ - Or (\_SB.PCI0.ICH0.PS1H, 0x09, \_SB.PCI0.ICH0.PS1H) - Or (\_SB.PCI0.ICH0.PE1H, 0x01, \_SB.PCI0.ICH0.PE1H) -} - -/* Prepare To Sleep */ -Method (\_PTS, 1, NotSerialized) -{ - Or (\_SB.PCI0.ICH0.GS0H, 0x19, \_SB.PCI0.ICH0.GS0H) - Or (\_SB.PCI0.ICH0.GS0L, 0x11, \_SB.PCI0.ICH0.GS0L) -} - -/* System Wake */ -Method (\_WAK, 1, NotSerialized) -{ - Or (\_SB.PCI0.ICH0.GS0H, 0x19, \_SB.PCI0.ICH0.GS0H) - Or (\_SB.PCI0.ICH0.GS0L, 0x11, \_SB.PCI0.ICH0.GS0L) - - Return ( Package() { 0x0, 0x0 } ) -} diff --git a/src/mainboard/aopen/dxplplusu/acpi/scsi.asl b/src/mainboard/aopen/dxplplusu/acpi/scsi.asl deleted file mode 100644 index c34dd4e..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/scsi.asl +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* PCI-X devices 04:04.0 and 04:04.1 : AIC-7902W - * U320 SCSI dual-channel controller - */ - -Device (SCS0) -{ - Name (_ADR, 0x00040000) - OperationRegion (SCSC, PCI_Config, 0x00, 0x0100) - Field (SCSC, ByteAcc, NoLock, Preserve) - { - Offset (0x2C), SID, 32, - Offset (0xE0), PMC, 8, - Offset (0xFF), IDW, 8 - } -} - -Device (SCS1) -{ - Name (_ADR, 0x00040001) - OperationRegion (SCSC, PCI_Config, 0x00, 0x0100) - Field (SCSC, ByteAcc, NoLock, Preserve) - { - Offset (0x2C), SID, 32, - Offset (0xE0), PMC, 8, - Offset (0xFF), IDW, 8 - } -} diff --git a/src/mainboard/aopen/dxplplusu/acpi/superio.asl b/src/mainboard/aopen/dxplplusu/acpi/superio.asl deleted file mode 100644 index b49ef44..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/superio.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - - -/* SuperIO GPIO configuration via logical device 0x0A */ - -Name (MSBF, ResourceTemplate () -{ - IO (Decode16, 0x0000, 0x0000, 0x01, 0x80, _Y1B) -}) - -OperationRegion (LPC0, SystemIO, 0x0E00, 0x60) -Field (LPC0, ByteAcc, NoLock, Preserve) -{ - PME0, 8, - Offset (0x02), PME2,8, - Offset (0x04), PME4,8, - Offset (0x0A), PMEA,8, - Offset (0x23), - GC10,8, GC11,8, GC12,8, GC13,8, GC14,8, GC15,8, GC16,8, GC17,8, - GC20,8, GC21,8, GC22,8, GC23,8, GC24,8, GC25,8, GC26,8, GC27,8, - GC30,8, GC31,8, GC32,8, GC33,8, GC34,8, GC35,8, GC36,8, GC37,8, - GC40,8, GC41,8, GC42,8, GC43,8, - - Offset (0x3F), - GC50,8, GC51,8, GC52,8, GC53,8, GC54,8, GC55,8, GC56,8, GC57,8, - GC60,8, GC61,8, - - Offset (0x4B), - GP_1,8, GP_2,8, GP_3,8, GP_4,8, GP_5,8, GP_6,8, - Offset (0x56), FAN1,8, - Offset (0x5D), LED1,8, LED2,8, -} - -OperationRegion (SMC1, SystemIO, 0x2E, 0x02) -Field (SMC1, ByteAcc, NoLock, Preserve) -{ - INDX, 8, DATA, 8 -} - -IndexField (INDX, DATA, ByteAcc, NoLock, Preserve) -{ - Offset (0x07), LDN, 8, - Offset (0x22), PWRC, 8, - Offset (0x30), ACTR, 8, - Offset (0x60), - IOAH, 8, IOAL, 8, - IOBH, 8, IOBL, 8, - - Offset (0x70), INTR, 8, - Offset (0x72), INT1, 8, - Offset (0x74), DMCH, 8, - Offset (0xB2), SPS1, 8, SPS2, 8, - Offset (0xB8), D2TS, 8, - Offset (0xF0), OPT1, 8, OPT2, 8, OPT3, 8, - Offset (0xF4), WDTC, 8, - Offset (0xF6), GP01, 8, GP02, 8, GP04, 8 -} - -Method (ECFG, 0, NotSerialized) -{ - Store (0x55, INDX) -} -Method (XCFG, 0, NotSerialized) -{ - Store (0xAA, INDX) -} - -Method (_CRS, 0, NotSerialized) -{ - CreateWordField (MSBF, \_SB.PCI0.ICH0.SMSC._Y1B._MIN, IOM1) - CreateWordField (MSBF, \_SB.PCI0.ICH0.SMSC._Y1B._MAX, IOM2) - CreateByteField (MSBF, \_SB.PCI0.ICH0.SMSC._Y1B._LEN, IOML) - - ECFG () - Store (0x0A, \_SB.PCI0.ICH0.SMSC.LDN) - Store (0x00, IOM1) - Store (0x00, IOM2) - Or (\_SB.PCI0.ICH0.SMSC.IOAH, IOM1, IOM1) - ShiftLeft (IOM1, 0x08, IOM1) - Or (\_SB.PCI0.ICH0.SMSC.IOAL, IOM1, IOM1) - Store (IOM1, IOM2) - If (IOM1 != 0) - { - Store (0x80, IOML) - } - XCFG () - - Return (MSBF) -} - - -Method (_INI, 0, NotSerialized) -{ - /* GPIO configuration */ - Store (0x00, GC10) - Store (0x81, GC11) - Store (0x00, GC17) - Store (0x0c, GC21) - Store (0x00, GC22) - Store (0x04, GC27) - Store (0x04, GC30) - Store (0x01, GC31) - Store (0x01, GC32) - Store (0x01, GC33) - Store (0x01, GC34) /* GPI password jumper */ - Store (0x01, GC35) /* GPI scsi enable jumper */ - Store (0x01, GC42) /* GPI */ - Store (0x86, GC60) /* led 1 */ - Store (0x81, GC61) /* led 2 ?? */ - - /* GPIO initial output levels */ - Store (GP_1, Local0) - And( Local0, 0x7C, Local0) - Or ( Local0, 0x81, Local0) - Store (Local0, GP_1) - - Store (GP_2, Local0) - And( Local0, 0xFE, Local0) - Or ( Local0, 0x00, Local0) - Store (Local0, GP_2) - - Store (GP_3, Local0) - And( Local0, 0x7F, Local0) - Or ( Local0, 0x80, Local0) - Store (Local0, GP_3) - - Store (GP_4, Local0) - And( Local0, 0x7F, Local0) - Or ( Local0, 0x00, Local0) - Store (Local0, GP_4) - - /* Power Led */ - Store (LED1, Local0) - And( Local0, 0xfc, Local0) - Or ( Local0, 0x01, Local0) - Store (Local0, LED1) - -} - -Method (MLED, 1, NotSerialized) -{ - If (LEqual (Arg0, 0x00)) - { - Store (0x00, LED1) - } - - If (LEqual (Arg0, 0x01) || LEqual (Arg0, 0x02)) - { - Store (0x01, LED1) - } - - If (LEqual (Arg0, 0x03)) - { - Store (0x02, LED1) - } - - If (LEqual (Arg0, 0x04) || LEqual (Arg0, 0x05)) - { - Store (0x03, LED1) - } -} diff --git a/src/mainboard/aopen/dxplplusu/acpi_tables.c b/src/mainboard/aopen/dxplplusu/acpi_tables.c deleted file mode 100644 index 65d1f6c8..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi_tables.c +++ /dev/null @@ -1,62 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* - * Ported to Intel XE7501DEVKIT by Agami Aruma - * Ported to AOpen DXPL Plus-U by Kyösti Mälkki - */ - -#include <acpi/acpi.h> -#include <device/pci_def.h> - -#define IOAPIC_ICH4 2 -#define IOAPIC_P64H2_BUS_B 3 /* IOAPIC 3 at 02:1c.0 */ -#define IOAPIC_P64H2_BUS_A 4 /* IOAPIC 4 at 02:1e.0 */ - -#define INTEL_IOAPIC_NUM_INTERRUPTS 24 /* Both ICH-4 and P64-H2 */ - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int irq_start = 0; - struct device *bdev, *dev = NULL; - struct resource* res = NULL; - - /* SJM: Hard-code CPU LAPIC entries for now */ - current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 0); - current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 6); - current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 1); - current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 7); - - /* Southbridge IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_ICH4, - 0xfec00000, irq_start); - irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; - - bdev = pcidev_on_root(2, 0); - /* P64H2 Bus B IOAPIC */ - if (bdev) - dev = pcidev_path_behind(bdev->link_list, PCI_DEVFN(28, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, - IOAPIC_P64H2_BUS_B, res->base, irq_start); - irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; - } - - /* P64H2 Bus A IOAPIC */ - if (bdev) - dev = pcidev_path_behind(bdev->link_list, PCI_DEVFN(30, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, - IOAPIC_P64H2_BUS_A, res->base, irq_start); - irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; - } - - /* Map ISA IRQ 0 to IRQ 2 */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 1, 0, 2, 0); - - /* IRQ9 differs from ISA standard - ours is active high, level-triggered */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 0, 9, 9, 0xD); - - return current; -} diff --git a/src/mainboard/aopen/dxplplusu/board_info.txt b/src/mainboard/aopen/dxplplusu/board_info.txt deleted file mode 100644 index 4e50628..0000000 --- a/src/mainboard/aopen/dxplplusu/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: server -Board URL: ftp://ftp.aopen.com/pub/server/motherboard/dxplpu/manual/dxplpu-ol-e.pdf -ROM package: PLCC -ROM protocol: FWH -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/aopen/dxplplusu/bootblock.c b/src/mainboard/aopen/dxplplusu/bootblock.c deleted file mode 100644 index 5a969cf..0000000 --- a/src/mainboard/aopen/dxplplusu/bootblock.c +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <bootblock_common.h> -#include <superio/smsc/lpc47m10x/lpc47m10x.h> - -#define SERIAL_DEV PNP_DEV(0x2e, LPC47M10X2_SP1) - -void bootblock_mainboard_early_init(void) -{ - /* Get the serial port configured. */ - lpc47m10x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); -} diff --git a/src/mainboard/aopen/dxplplusu/devicetree.cb b/src/mainboard/aopen/dxplplusu/devicetree.cb deleted file mode 100644 index 166be3d..0000000 --- a/src/mainboard/aopen/dxplplusu/devicetree.cb +++ /dev/null @@ -1,71 +0,0 @@ -## SPDX-License-Identifier: GPL-2.0-only - -chip northbridge/intel/e7505 - - device cpu_cluster 0 on - chip cpu/intel/socket_mPGA604 - device lapic 0 on end - device lapic 6 on end - end - end - - device domain 0 on - device pci 0.0 on end # Chipset host controller - device pci 0.1 on end # Host RASUM controller - device pci 2.0 on # Hub interface B - chip southbridge/intel/i82870 # P64H2 - device pci 1c.0 on end # IOAPIC - bus B - device pci 1d.0 on end # Hub to PCI-B bridge - device pci 1e.0 on end # IOAPIC - bus A - device pci 1f.0 on end # Hub to PCI-A bridge - end - end - device pci 4.0 off end # (undocumented) - device pci 6.0 off end # (undocumented) - chip southbridge/intel/i82801dx - device pci 1d.0 on end # USB UHCI - device pci 1d.1 on end # USB UHCI - device pci 1d.2 on end # USB UHCI - device pci 1d.7 on end # USB EHCI - device pci 1e.0 on # Hub to PCI bridge - device pci 2.0 off end - end - device pci 1f.0 on # LPC bridge - chip superio/smsc/lpc47m10x - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 off # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard interrupt - irq 0x72 = 12 # Mouse interrupt - end - device pnp 2e.a on # ACPI - io 0x60 = 0x0e00 - end - end - end - device pci 1f.1 on end # IDE - register "ide0_enable" = "1" - register "ide1_enable" = "1" - device pci 1f.3 on end # SMBus - device pci 1f.5 on end # AC97 Audio - device pci 1f.6 off end # AC97 Modem - end # SB - end # PCI domain -end diff --git a/src/mainboard/aopen/dxplplusu/dsdt.asl b/src/mainboard/aopen/dxplplusu/dsdt.asl deleted file mode 100644 index d00d1e5..0000000 --- a/src/mainboard/aopen/dxplplusu/dsdt.asl +++ /dev/null @@ -1,97 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <acpi/acpi.h> - -DefinitionBlock( - "dsdt.aml", - "DSDT", - ACPI_DSDT_REV_2, - OEM_ID, - ACPI_TABLE_CREATOR, - 0x20111103 // OEM revision -) { - #include <acpi/dsdt_top.asl> - -Scope(\_SB) -{ - Device(PCI0) { - Name (_HID, EISAID("PNP0A03")) - Name (_PRT, Package() { - Package() { 0x001dffff, 0, 0, 16 }, - Package() { 0x001dffff, 1, 0, 19 }, - Package() { 0x001dffff, 2, 0, 18 }, - Package() { 0x001dffff, 3, 0, 23 }, - Package() { 0x001fffff, 0, 0, 18 }, - Package() { 0x001fffff, 1, 0, 17 }, - }) - - #include "acpi/e7505_sec.asl" - - OperationRegion (I750, PCI_Config, 0x00, 0x0100) - Field (I750, ByteAcc, NoLock, Preserve) - { - Offset (0xC4), - TOLM, 16, /* Top of Low Memory */ - RBAR, 16, /* REMAP_BASE */ - RLAR, 16 /* REMAP_LIMIT */ - } - } - - #include "acpi/e7505_pri.asl" - - - Device (PWBT) - { - Name (_HID, EisaId ("PNP0C0C")) - Name (_PRW, Package () { 0x08, 0x05 }) - } - - Device (SLBT) - { - Name (_HID, EisaId ("PNP0C0E")) - Name (_PRW, Package () { 0x0B, 0x05 }) - } - - Device (LID0) - { - Name (_HID, EisaId ("PNP0C0D")) - Name (_PRW, Package () { 0x0B, 0x05 }) - } - -} - -Scope(\_SB.PCI0) -{ - - Device(PCI1) - { - Name (_ADR, 0x00010000) - Name (_PRT, Package() { - Package() { 0x0000ffff, 0, 0, 16 }, - Package() { 0x0000ffff, 1, 0, 17 }, - }) - } - - Device(HLIB) - { - Name (_ADR, 0x00020000) - Name (_PRT, Package() { - Package() { 0x001dffff, 0, 0, 18 }, - Package() { 0x001dffff, 1, 0, 18 }, - Package() { 0x001dffff, 2, 0, 18 }, - Package() { 0x001dffff, 3, 0, 18 }, - Package() { 0x001fffff, 0, 0, 18 }, - Package() { 0x001fffff, 1, 0, 18 }, - Package() { 0x001fffff, 2, 0, 18 }, - Package() { 0x001fffff, 3, 0, 18 }, - }) - - #include "acpi/p64h2.asl" - } - - #include "acpi/i82801db.asl" -} - -#include "acpi/power.asl" - -} diff --git a/src/northbridge/intel/e7505/Kconfig b/src/northbridge/intel/e7505/Kconfig deleted file mode 100644 index c0711ee..0000000 --- a/src/northbridge/intel/e7505/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -config NORTHBRIDGE_INTEL_E7505 - bool - -if NORTHBRIDGE_INTEL_E7505 - -config NORTHBRIDGE_SPECIFIC_OPTIONS - def_bool y - select NO_ECAM_MMCONF_SUPPORT - select HAVE_DEBUG_RAM_SETUP - select NO_CBFS_MCACHE - select LEGACY_SMP_INIT - -endif diff --git a/src/northbridge/intel/e7505/Makefile.inc b/src/northbridge/intel/e7505/Makefile.inc deleted file mode 100644 index 29ac437..0000000 --- a/src/northbridge/intel/e7505/Makefile.inc +++ /dev/null @@ -1,10 +0,0 @@ -ifeq ($(CONFIG_NORTHBRIDGE_INTEL_E7505),y) - -ramstage-y += northbridge.c -ramstage-y += memmap.c - -romstage-y += romstage.c -romstage-y += raminit.c -romstage-y += memmap.c - -endif diff --git a/src/northbridge/intel/e7505/e7505.h b/src/northbridge/intel/e7505/e7505.h deleted file mode 100644 index b429c70..0000000 --- a/src/northbridge/intel/e7505/e7505.h +++ /dev/null @@ -1,78 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ - -/* - * e7505.h: PCI configuration space for the Intel E7501 memory controller - */ - -#ifndef NORTHBRIDGE_INTEL_E7505_E7505_H -#define NORTHBRIDGE_INTEL_E7505_E7505_H - -/************ D0:F0 ************/ -// Register offsets -#define SMRBASE 0x14 /* System Memory RCOMP Base Address Register, 32 bit? */ -#define MCHCFGNS 0x52 /* MCH (scrubber) configuration register, 16 bit */ - -#define PAM_0 0x59 - -#define DRB_ROW_0 0x60 /* DRAM Row Boundary register, 8 bit */ -#define DRB_ROW_1 0x61 -#define DRB_ROW_2 0x62 -#define DRB_ROW_3 0x63 -#define DRB_ROW_4 0x64 -#define DRB_ROW_5 0x65 -#define DRB_ROW_6 0x66 -#define DRB_ROW_7 0x67 - -#define DRA 0x70 /* DRAM Row Attributes registers, 4 x 8 bit */ -#define DRT 0x78 /* DRAM Timing register, 32 bit */ -#define DRC 0x7C /* DRAM Controller Mode register, 32 bit */ -#define DRDCTL 0x80 /* DRAM Read Timing Control register, 16 bit? (if similar to 855PM) */ -#define CKDIS 0x8C /* Clock disable register, 8 bit */ -#define SMRAMC 0x9D -#define ESMRAMC 0x9E -#define APSIZE 0xB4 -#define TOLM 0xC4 /* Top of Low Memory register, 16 bit */ -#define REMAPBASE 0xC6 /* Remap Base Address register, 16 bit */ -#define REMAPLIMIT 0xC8 /* Remap Limit Address register, 16 bit */ -#define SKPD 0xDE /* Scratchpad register, 16 bit */ -#define DVNP 0xE0 /* Device Not Present, 16 bit */ -#define MCHTST 0xF4 /* MCH Test Register, 32 bit? (if similar to 855PM) */ - -// CAS# Latency bits in the DRAM Timing (DRT) register -#define DRT_CAS_2_5 (0<<4) -#define DRT_CAS_2_0 (1<<4) -#define DRT_CAS_MASK (3<<4) - -// Mode Select (SMS) bits in the DRAM Controller Mode (DRC) register -#define RAM_COMMAND_NOP (1<<4) -#define RAM_COMMAND_PRECHARGE (2<<4) -#define RAM_COMMAND_MRS (3<<4) -#define RAM_COMMAND_EMRS (4<<4) -#define RAM_COMMAND_CBR (6<<4) -#define RAM_COMMAND_NORMAL (7<<4) - -#define DRC_DONE (1 << 29) - -// RCOMP Memory Map offsets -// Conjecture based on apparent similarity between E7501 and 855PM -// Intel doc. 252613-003 describes these for 855PM - -#define SMRCTL 0x20 /* System Memory RCOMP Control Register? */ -#define DQCMDSTR 0x30 /* Strength control for DQ and CMD signal groups? */ -#define CKESTR 0x31 /* Strength control for CKE signal group? */ -#define CSBSTR 0x32 /* Strength control for CS# signal group? */ -#define CKSTR 0x33 /* Strength control for CK signal group? */ -#define RCVENSTR 0x34 /* Strength control for RCVEnOut# signal group? */ - -/************ D0:F1 ************/ -// Register offsets -#define FERR_GLOBAL 0x40 /* First global error register, 32 bits */ -#define NERR_GLOBAL 0x44 /* Next global error register, 32 bits */ -#define DRAM_FERR 0x80 /* DRAM first error register, 8 bits */ -#define DRAM_NERR 0x82 /* DRAM next error register, 8 bits */ - -/************ D1:F0 ************/ - -#define APSIZE1 0x74 - -#endif /* NORTHBRIDGE_INTEL_E7505_E7505_H */ diff --git a/src/northbridge/intel/e7505/memmap.c b/src/northbridge/intel/e7505/memmap.c deleted file mode 100644 index b1ac3d1..0000000 --- a/src/northbridge/intel/e7505/memmap.c +++ /dev/null @@ -1,53 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -// Use simple device model for this file even in ramstage -#define __SIMPLE_DEVICE__ - -#include <device/pci_ops.h> -#include <arch/romstage.h> -#include <cbmem.h> -#include <cpu/x86/mtrr.h> -#include <program_loading.h> -#include "e7505.h" - -void *cbmem_top_chipset(void) -{ - const pci_devfn_t mch = PCI_DEV(0, 0, 0); - uintptr_t tolm; - - /* This is at 128 MiB boundary. */ - tolm = pci_read_config16(mch, TOLM) >> 11; - tolm <<= 27; - - return (void *)tolm; -} - -void northbridge_write_smram(u8 smram); - -void northbridge_write_smram(u8 smram) -{ - const pci_devfn_t mch = PCI_DEV(0, 0, 0); - pci_write_config8(mch, SMRAMC, smram); -} - -void fill_postcar_frame(struct postcar_frame *pcf) -{ - uintptr_t top_of_ram; - - /* - * Choose to NOT set ROM as WP cacheable here. - * Timestamps indicate the CPU this northbridge code is - * connected to, performs better for memcpy() and un-lzma - * operations when source is left as UC. - */ - - pcf->skip_common_mtrr = 1; - - /* Cache RAM as WB from 0 -> CACHE_TMP_RAMTOP. */ - postcar_frame_add_mtrr(pcf, 0, CACHE_TMP_RAMTOP, MTRR_TYPE_WRBACK); - - /* Cache CBMEM region as WB. */ - top_of_ram = (uintptr_t)cbmem_top(); - postcar_frame_add_mtrr(pcf, top_of_ram - 8*MiB, 8*MiB, - MTRR_TYPE_WRBACK); -} diff --git a/src/northbridge/intel/e7505/northbridge.c b/src/northbridge/intel/e7505/northbridge.c deleted file mode 100644 index 33e1018..0000000 --- a/src/northbridge/intel/e7505/northbridge.c +++ /dev/null @@ -1,87 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <assert.h> -#include <console/console.h> -#include <device/pci_ops.h> -#include <device/device.h> -#include <device/pci.h> -#include <cpu/cpu.h> - -#include "e7505.h" - -static void mch_domain_read_resources(struct device *dev) -{ - int idx; - unsigned long tolmk; - uint64_t tom, remapbase, remaplimit; - struct device *mc_dev; - - pci_domain_read_resources(dev); - - mc_dev = pcidev_on_root(0, 0); - if (!mc_dev) - die("Could not find MCH device\n"); - - tolmk = pci_read_config16(mc_dev, TOLM) >> 11; - tolmk <<= 17; - - tom = pci_read_config8(mc_dev, DRB_ROW_7); - tom <<= 26; - - /* Remapped region with a 64 MiB granularity in register - definition. Limit is inclusive, so add one. */ - remapbase = pci_read_config16(mc_dev, REMAPBASE) & 0x3ff; - remapbase <<= 26; - - remaplimit = pci_read_config16(mc_dev, REMAPLIMIT) & 0x3ff; - remaplimit += 1; - remaplimit <<= 26; - - /* Report the memory regions */ - idx = 10; - ram_resource_kb(dev, idx++, 0, tolmk); - mmio_resource_kb(dev, idx++, 0xa0000 / KiB, (0xc0000 - 0xa0000) / KiB); - - - ASSERT(tom == remapbase); - upper_ram_end(dev, idx++, remaplimit); -} - -static void mch_domain_set_resources(struct device *dev) -{ - assign_resources(dev->link_list); -} - -static struct device_operations pci_domain_ops = { - .read_resources = mch_domain_read_resources, - .set_resources = mch_domain_set_resources, - .scan_bus = pci_domain_scan_bus, - .ops_pci = &pci_dev_ops_pci, -}; - -static void cpu_bus_init(struct device *dev) -{ - initialize_cpus(dev->link_list); -} - -static struct device_operations cpu_bus_ops = { - .read_resources = noop_read_resources, - .set_resources = noop_set_resources, - .init = cpu_bus_init, -}; - -static void enable_dev(struct device *dev) -{ - /* Set the operations if it is a special bus type */ - if (dev->path.type == DEVICE_PATH_DOMAIN) { - dev->ops = &pci_domain_ops; - } - else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { - dev->ops = &cpu_bus_ops; - } -} - -struct chip_operations northbridge_intel_e7505_ops = { - CHIP_NAME("Intel E7505 Northbridge") - .enable_dev = enable_dev, -}; diff --git a/src/northbridge/intel/e7505/raminit.c b/src/northbridge/intel/e7505/raminit.c deleted file mode 100644 index 22a14ae..0000000 --- a/src/northbridge/intel/e7505/raminit.c +++ /dev/null @@ -1,1720 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* This was originally for the e7500, modified for e7501 - * The primary differences are that 7501 apparently can - * support single channel RAM (i haven't tested), - * CAS1.5 is no longer supported, The ECC scrubber - * now supports a mode to zero RAM and init ECC in one step - * and the undocumented registers at 0x80 require new - * (undocumented) values determined by guesswork and - * comparison w/ OEM BIOS values. - * Steven James 02/06/2003 - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/mmio.h> -#include <device/pci_ops.h> -#include <device/smbus_host.h> -#include <lib.h> -#include <commonlib/helpers.h> -#include <console/console.h> -#include <assert.h> -#include <spd.h> -#include <sdram_mode.h> -#include <timestamp.h> - -#include "raminit.h" -#include "e7505.h" - -/*----------------------------------------------------------------------------- -Definitions: ------------------------------------------------------------------------------*/ - -#if CONFIG(DEBUG_RAM_SETUP) -#define RAM_DEBUG_MESSAGE(x) printk(BIOS_DEBUG, x) -#define RAM_DEBUG_HEX32(x) printk(BIOS_DEBUG, "%08x", x) -#define RAM_DEBUG_HEX8(x) printk(BIOS_DEBUG, "%02x", x) -#else -#define RAM_DEBUG_MESSAGE(x) -#define RAM_DEBUG_HEX32(x) -#define RAM_DEBUG_HEX8(x) -#endif - -#define E7501_SDRAM_MODE (SDRAM_BURST_INTERLEAVED | SDRAM_BURST_4) -#define SPD_ERROR "Error reading SPD info\n" - -#define MCHDEV PCI_DEV(0, 0, 0) -#define RASDEV PCI_DEV(0, 0, 1) -#define AGPDEV PCI_DEV(0, 1, 0) -#define D060DEV PCI_DEV(0, 6, 0) - -// NOTE: This used to be 0x100000. -// That doesn't work on systems where A20M# is asserted, because -// attempts to access 0x1000NN end up accessing 0x0000NN. -#define RCOMP_MMIO ((u8 *)0x200000) - -struct dimm_size { - unsigned long side1; - unsigned long side2; -}; - -static const uint32_t refresh_frequency[] = { - /* Relative frequency (array value) of each E7501 Refresh Mode Select - * (RMS) value (array index) - * 0 == least frequent refresh (longest interval between refreshes) - * [0] disabled -> 0 - * [1] 15.6 usec -> 2 - * [2] 7.8 usec -> 3 - * [3] 64 usec -> 1 - * [4] reserved -> 0 - * [5] reserved -> 0 - * [6] reserved -> 0 - * [7] 64 clocks -> 4 - */ - 0, 2, 3, 1, 0, 0, 0, 4 -}; - -static const uint32_t refresh_rate_map[] = { - /* Map the JEDEC spd refresh rates (array index) to E7501 Refresh Mode - * Select values (array value) - * These are all the rates defined by JESD21-C Appendix D, Rev. 1.0 - * The E7501 supports only 15.6 us (1), 7.8 us (2), 64 us (3), and - * 64 clock (481 ns) (7) refresh. - * [0] == 15.625 us -> 15.6 us - * [1] == 3.9 us -> 481 ns - * [2] == 7.8 us -> 7.8 us - * [3] == 31.3 us -> 15.6 us - * [4] == 62.5 us -> 15.6 us - * [5] == 125 us -> 64 us - */ - 1, 7, 2, 1, 1, 3 -}; - -#define MAX_SPD_REFRESH_RATE (ARRAY_SIZE(refresh_rate_map) - 1) - -// SPD parameters that must match for dual-channel operation -static const uint8_t dual_channel_parameters[] = { - SPD_MEMORY_TYPE, - SPD_MODULE_VOLTAGE, - SPD_NUM_COLUMNS, - SPD_NUM_ROWS, - SPD_NUM_DIMM_BANKS, - SPD_PRIMARY_SDRAM_WIDTH, - SPD_NUM_BANKS_PER_SDRAM -}; - - /* Comments here are remains of e7501 or even 855PM. - * They might be partially (in)correct for e7505. - */ - - /* (DRAM Read Timing Control, if similar to 855PM?) - * 0x80 - 0x81 documented differently for e7505 - * This register has something to do with CAS latencies, - * possibly this is the real chipset control. - * At 0x00 CAS latency 1.5 works. - * At 0x06 CAS latency 2.5 works. - * At 0x01 CAS latency 2.0 works. - * - * This is still undocumented in e7501, but with different values - * CAS 2.0 values taken from Intel BIOS settings, others are a guess - * and may be terribly wrong. Old values preserved as comments until I - * figure this out for sure. - * e7501 docs claim that CAS1.5 is unsupported, so it may or may not - * work at all. - * Steven James 02/06/2003 - * - * NOTE: values now configured in configure_e7501_cas_latency() based - * on SPD info and total number of DIMMs (per Intel) - */ - - /* FDHC - Fixed DRAM Hole Control ??? - * 0x58 undocumented for e7505, memory hole in southbridge configuration? - * [7:7] Hole_Enable - * 0 == No memory Hole - * 1 == Memory Hole from 15MB to 16MB - * [6:0] Reserved - */ - - /* Another Intel undocumented register - * 0x88 - 0x8B - * [31:31] Purpose unknown - * [26:26] Master DLL Reset? - * 0 == Normal operation? - * 1 == Reset? - * [07:07] Periodic memory recalibration? - * 0 == Disabled? - * 1 == Enabled? - * [04:04] Receive FIFO RE-Sync? - * 0 == Normal operation? - * 1 == Reset? - */ - -/* DDR RECOMP tables */ -// Slew table for 2x drive? -static const uint32_t slew_2x[] = { - 0x00000000, 0x76543210, 0xffffeca8, 0xffffffff, - 0x21000000, 0xa8765432, 0xffffffec, 0xffffffff, -}; - -// Pull Up / Pull Down offset table, if analogous to IXP2800? -static const uint32_t pull_updown_offset_table[] = { - 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, - 0x88888888, 0x88888888, 0x88888888, 0x88888888, -}; - -/*----------------------------------------------------------------------------- -Delay functions: ------------------------------------------------------------------------------*/ - -/* Estimate that SLOW_DOWN_IO takes about 1 us */ -#define SLOW_DOWN_IO inb(0x80) -static void local_udelay(int i) -{ - while (i--) { - SLOW_DOWN_IO; - } -} - -/* delay for 200us */ -#define DO_DELAY local_udelay(200) -#define EXTRA_DELAY DO_DELAY - -/*----------------------------------------------------------------------------- -Handle (undocumented) control bits MCHTST and PCI_DEV(0,6,0) ------------------------------------------------------------------------------*/ -typedef enum { - MCHTST_CMD_0, - D060_ENABLE, - D060_DISABLE, - RCOMP_BAR_ENABLE, - RCOMP_BAR_DISABLE, -} mchtst_cc; - -typedef enum { - D060_CMD_0, - D060_CMD_1, -} d060_cc; - -typedef enum { - RCOMP_HOLD, - RCOMP_RELEASE, - RCOMP_SMR_00, - RCOMP_SMR_01, -} rcomp_smr_cc; - -/** - * MCHTST - 0xF4 - 0xF7 -- Based on similarity to 855PM - * - * [31:31] Purpose unknown - * [30:30] Purpose unknown - * [29:23] Unknown - not used? - * [22:22] System Memory MMR Enable - * 0 == Disable: mem space and BAR at 0x14 are not accessible - * 1 == Enable: mem space and BAR at 0x14 are accessible - * [21:20] Purpose unknown - * [19:02] Unknown - not used? - * [01:01] D6EN (Device #6 enable) - * 0 == Disable - * 1 == Enable - * [00:00] Unknown - not used? - */ -static void mchtest_control(mchtst_cc cmd) -{ - uint32_t dword = pci_read_config32(MCHDEV, MCHTST); - switch (cmd) { - case MCHTST_CMD_0: - dword &= ~(3 << 30); - break; - case RCOMP_BAR_ENABLE: - dword |= (1 << 22); - break; - case RCOMP_BAR_DISABLE: - dword &= ~(1 << 22); - break; - case D060_ENABLE: - dword |= (1 << 1); - break; - case D060_DISABLE: - dword &= ~(1 << 1); - break; - }; - pci_write_config32(MCHDEV, MCHTST, dword); -} - -/** - * - */ -static void d060_control(d060_cc cmd) -{ - mchtest_control(D060_ENABLE); - uint32_t dword = pci_read_config32(D060DEV, 0xf0); - switch (cmd) { - case D060_CMD_0: - dword |= (1 << 2); - break; - case D060_CMD_1: - dword |= (3 << 27); - break; - } - pci_write_config32(D060DEV, 0xf0, dword); - mchtest_control(D060_DISABLE); -} - -/** - * - */ -static void rcomp_smr_control(rcomp_smr_cc cmd) -{ - uint32_t dword = read32(RCOMP_MMIO + SMRCTL); - switch (cmd) { - case RCOMP_HOLD: - dword |= (1 << 9); - break; - case RCOMP_RELEASE: - dword &= ~((1 << 9) | (3 << 0)); - dword |= (1 << 10) | (1 << 0); - break; - case RCOMP_SMR_00: - dword &= ~(1 << 8); - break; - case RCOMP_SMR_01: - dword |= (1 << 10) | (1 << 8); - break; - } - write32(RCOMP_MMIO + SMRCTL, dword); -} - -/*----------------------------------------------------------------------------- -Serial presence detect (SPD) functions: ------------------------------------------------------------------------------*/ - -static void die_on_spd_error(int spd_return_value) -{ - if (spd_return_value < 0) - die("Error reading SPD info\n"); -} - -/** - * Calculate the page size for each physical bank of the DIMM: - * log2(page size) = (# columns) + log2(data width) - * - * NOTE: Page size is the total number of data bits in a row. - * - * @param dimm_socket_address SMBus address of DIMM socket to interrogate. - * @return log2(page size) for each side of the DIMM. - */ -static struct dimm_size sdram_spd_get_page_size(uint16_t dimm_socket_address) -{ - uint16_t module_data_width; - int value; - struct dimm_size pgsz; - - pgsz.side1 = 0; - pgsz.side2 = 0; - - // Side 1 - value = smbus_read_byte(dimm_socket_address, SPD_NUM_COLUMNS); - if (value < 0) - goto hw_err; - pgsz.side1 = value & 0xf; // # columns in bank 1 - - /* Get the module data width and convert it to a power of two */ - value = smbus_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_MSB); - if (value < 0) - goto hw_err; - module_data_width = (value & 0xff) << 8; - - value = smbus_read_byte(dimm_socket_address, SPD_MODULE_DATA_WIDTH_LSB); - if (value < 0) - goto hw_err; - module_data_width |= (value & 0xff); - - pgsz.side1 += log2(module_data_width); - - /* side two */ - value = smbus_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS); - if (value < 0) - goto hw_err; - if (value > 2) - die("Bad SPD value\n"); - if (value == 2) { - - pgsz.side2 = pgsz.side1; // Assume symmetric banks until we know differently - value = smbus_read_byte(dimm_socket_address, SPD_NUM_COLUMNS); - if (value < 0) - goto hw_err; - if ((value & 0xf0) != 0) { - // Asymmetric banks - pgsz.side2 -= value & 0xf; /* Subtract out columns on side 1 */ - pgsz.side2 += (value >> 4) & 0xf; /* Add in columns on side 2 */ - } - } - - return pgsz; - - hw_err: - die(SPD_ERROR); - return pgsz; // Never reached -} - -/** - * Read the width in bits of each DIMM side's DRAMs via SPD (i.e. 4, 8, 16). - * - * @param dimm_socket_address SMBus address of DIMM socket to interrogate. - * @return Width in bits of each DIMM side's DRAMs. - */ -static struct dimm_size sdram_spd_get_width(uint16_t dimm_socket_address) -{ - int value; - struct dimm_size width; - - width.side1 = 0; - width.side2 = 0; - - value = smbus_read_byte(dimm_socket_address, SPD_PRIMARY_SDRAM_WIDTH); - die_on_spd_error(value); - - width.side1 = value & 0x7f; // Mask off bank 2 flag - - if (value & 0x80) { - width.side2 = width.side1 << 1; // Bank 2 exists and is double-width - } else { - // If bank 2 exists, it's the same width as bank 1 - value = smbus_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS); - die_on_spd_error(value); - - if (value == 2) - width.side2 = width.side1; - } - - return width; -} - -/** - * Calculate the log base 2 size in bits of both DIMM sides. - * - * log2(# bits) = (# columns) + log2(data width) + - * (# rows) + log2(banks per SDRAM) - * - * Note that it might be easier to use SPD byte 31 here, it has the DIMM size - * as a multiple of 4MB. The way we do it now we can size both sides of an - * asymmetric DIMM. - * - * @param dimm_socket_address SMBus address of DIMM socket to interrogate. - * @return log2(number of bits) for each side of the DIMM. - */ -static struct dimm_size spd_get_dimm_size(unsigned int dimm_socket_address) -{ - int value; - - // Start with log2(page size) - struct dimm_size sz = sdram_spd_get_page_size(dimm_socket_address); - - if (sz.side1 > 0) { - - value = smbus_read_byte(dimm_socket_address, SPD_NUM_ROWS); - die_on_spd_error(value); - - sz.side1 += value & 0xf; - - if (sz.side2 > 0) { - - // Double-sided DIMM - if (value & 0xF0) - sz.side2 += value >> 4; // Asymmetric - else - sz.side2 += value; // Symmetric - } - - value = smbus_read_byte(dimm_socket_address, - SPD_NUM_BANKS_PER_SDRAM); - die_on_spd_error(value); - - value = log2(value); - sz.side1 += value; - if (sz.side2 > 0) - sz.side2 += value; - } - - return sz; -} - -/** - * Determine whether two DIMMs have the same value for an SPD parameter. - * - * @param spd_byte_number The SPD byte number to compare in both DIMMs. - * @param dimm0_address SMBus address of the 1st DIMM socket to interrogate. - * @param dimm1_address SMBus address of the 2nd DIMM socket to interrogate. - * @return 1 if both DIMM sockets report the same value for the specified - * SPD parameter, 0 if the values differed or an error occurred. - */ -static uint8_t are_spd_values_equal(uint8_t spd_byte_number, - uint16_t dimm0_address, - uint16_t dimm1_address) -{ - uint8_t bEqual = 0; - int dimm0_value = smbus_read_byte(dimm0_address, spd_byte_number); - int dimm1_value = smbus_read_byte(dimm1_address, spd_byte_number); - - if ((dimm0_value >= 0) && (dimm1_value >= 0) - && (dimm0_value == dimm1_value)) - bEqual = 1; - - return bEqual; -} - -/** - * Scan for compatible DIMMs. - * - * The code in this module only supports dual-channel operation, so we test - * that compatible DIMMs are paired. - * - * @param ctrl PCI addresses of memory controller functions, and SMBus - * addresses of DIMM slots on the mainboard. - * @return A bitmask indicating which of the possible sockets for each channel - * was found to contain a compatible DIMM. - * Bit 0 corresponds to the closest socket for channel 0 - * Bit 1 to the next socket for channel 0 - * ... - * Bit MAX_DIMM_SOCKETS_PER_CHANNEL-1 to the last socket for channel 0 - * Bit MAX_DIMM_SOCKETS_PER_CHANNEL is the closest socket for channel 1 - * ... - * Bit 2*MAX_DIMM_SOCKETS_PER_CHANNEL-1 is the last socket for channel 1 - */ -static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl) -{ - int i; - uint8_t dimm_mask = 0; - - // Have to increase size of dimm_mask if this assertion is violated - ASSERT(MAX_DIMM_SOCKETS_PER_CHANNEL <= 4); - - // Find DIMMs we can support on channel 0. - // Then see if the corresponding channel 1 DIMM has the same parameters, - // since we only support dual-channel. - - for (i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { - - uint16_t channel0_dimm = ctrl->channel0[i]; - uint16_t channel1_dimm = ctrl->channel1[i]; - uint8_t bDualChannel = 1; - struct dimm_size page_size; - struct dimm_size sdram_width; - int spd_value; - - if (channel0_dimm == 0) - continue; // No such socket on this mainboard - - if (smbus_read_byte(channel0_dimm, SPD_MEMORY_TYPE) != - SPD_MEMORY_TYPE_SDRAM_DDR) - continue; - - if (smbus_read_byte(channel0_dimm, SPD_MODULE_VOLTAGE) != - SPD_VOLTAGE_SSTL2) - continue; // Unsupported voltage - - // E7501 does not support unregistered DIMMs - spd_value = smbus_read_byte(channel0_dimm, SPD_MODULE_ATTRIBUTES); - if (!(spd_value & MODULE_REGISTERED) || (spd_value < 0)) - continue; - - // Must support burst = 4 for dual-channel operation on E7501 - // NOTE: for single-channel, burst = 8 is required - spd_value = smbus_read_byte(channel0_dimm, - SPD_SUPPORTED_BURST_LENGTHS); - if (!(spd_value & SPD_BURST_LENGTH_4) || (spd_value < 0)) - continue; - - page_size = sdram_spd_get_page_size(channel0_dimm); - sdram_width = sdram_spd_get_width(channel0_dimm); - - // Validate DIMM page size - // The E7501 only supports page sizes of 4, 8, 16, or 32 KB per channel - // NOTE: 4 KB = 32 Kb = 2^15 - // 32 KB = 262 Kb = 2^18 - - if ((page_size.side1 < 15) || (page_size.side1 > 18)) - continue; - - // If DIMM is double-sided, verify side2 page size - if (page_size.side2 != 0) { - if ((page_size.side2 < 15) - || (page_size.side2 > 18)) - continue; - } - // Validate SDRAM width - // The E7501 only supports x4 and x8 devices - - if ((sdram_width.side1 != 4) && (sdram_width.side1 != 8)) - continue; - - // If DIMM is double-sided, verify side2 width - if (sdram_width.side2 != 0) { - if ((sdram_width.side2 != 4) - && (sdram_width.side2 != 8)) - continue; - } - - // Channel 0 DIMM looks compatible. - // Now see if it is paired with the proper DIMM on channel 1. - - ASSERT(channel1_dimm != 0); // No such socket on this mainboard?? - - // NOTE: unpopulated DIMMs cause read to fail - spd_value = smbus_read_byte(channel1_dimm, SPD_MODULE_ATTRIBUTES); - if (!(spd_value & MODULE_REGISTERED) || (spd_value < 0)) { - - printk(BIOS_DEBUG, "Skipping un-matched DIMMs - only dual-channel operation supported\n"); - continue; - } - - spd_value = smbus_read_byte(channel1_dimm, - SPD_SUPPORTED_BURST_LENGTHS); - if (!(spd_value & SPD_BURST_LENGTH_4) || (spd_value < 0)) - continue; - - int j; - for (j = 0; j < sizeof(dual_channel_parameters); ++j) { - if (!are_spd_values_equal - (dual_channel_parameters[j], channel0_dimm, - channel1_dimm)) { - - bDualChannel = 0; - break; - } - } - - if (bDualChannel) { - // This DIMM pair is usable - dimm_mask |= 1 << i; - dimm_mask |= 1 << (MAX_DIMM_SOCKETS_PER_CHANNEL + i); - } else - printk(BIOS_DEBUG, "Skipping un-matched DIMMs - only dual-channel operation supported\n"); - } - - return dimm_mask; -} - -/*----------------------------------------------------------------------------- -SDRAM configuration functions: ------------------------------------------------------------------------------*/ - -/** - * Send the specified command to all DIMMs. - * - * @param command Specifies the command to be sent to the DIMMs. - * @param jedec_mode_bits For the MRS & EMRS commands, bits 0-12 contain the - * register value in JEDEC format. - */ -static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits) -{ - uint8_t dimm_start_64M_multiple; - uintptr_t dimm_start_address; - uint32_t dram_controller_mode; - uint8_t i; - - // Configure the RAM command - dram_controller_mode = pci_read_config32(MCHDEV, DRC); - dram_controller_mode &= 0xFFFFFF8F; - dram_controller_mode |= command; - pci_write_config32(MCHDEV, DRC, dram_controller_mode); - - // RAM_COMMAND_NORMAL is an exception. - // It affects only the memory controller and does not need to be "sent" to the DIMMs. - if (command == RAM_COMMAND_NORMAL) { - EXTRA_DELAY; - return; - } - - // NOTE: for mode select commands, some of the location address bits are part of the command - // Map JEDEC mode bits to E7505 - if (command == RAM_COMMAND_MRS) { - // Host address lines [25:18] map to DIMM address lines [7:0] - // Host address lines [17:16] map to DIMM address lines [9:8] - // Host address lines [15:4] map to DIMM address lines [11:0] - dimm_start_address = (jedec_mode_bits & 0x00ff) << 18; - dimm_start_address |= (jedec_mode_bits & 0x0300) << 8; - dimm_start_address |= (jedec_mode_bits & 0x0fff) << 4; - } else if (command == RAM_COMMAND_EMRS) { - // Host address lines [15:4] map to DIMM address lines [11:0] - dimm_start_address = (jedec_mode_bits << 4); - } else { - ASSERT(jedec_mode_bits == 0); - dimm_start_address = 0; - } - - // Send the command to all DIMMs by accessing a memory location within each - - dimm_start_64M_multiple = 0; - - /* FIXME: Only address the number of rows present in the system? - * Seems like rows 4-7 overlap with 0-3. - */ - for (i = 0; i < (MAX_NUM_CHANNELS * MAX_DIMM_SOCKETS_PER_CHANNEL); ++i) { - - uint8_t dimm_end_64M_multiple = pci_read_config8(MCHDEV, DRB_ROW_0 + i); - - if (dimm_end_64M_multiple > dimm_start_64M_multiple) { - dimm_start_address &= 0x3ffffff; - dimm_start_address |= dimm_start_64M_multiple << 26; - read32((void *)dimm_start_address); - // Set the start of the next DIMM - dimm_start_64M_multiple = dimm_end_64M_multiple; - } - } - EXTRA_DELAY; -} - -/** - * Set the mode register of all DIMMs. - * - * The proper CAS# latency setting is added to the mode bits specified - * by the caller. - * - * @param jedec_mode_bits For the MRS & EMRS commands, bits 0-12 contain the - * register value in JEDEC format. - */ -static void set_ram_mode(uint16_t jedec_mode_bits) -{ - ASSERT(!(jedec_mode_bits & SDRAM_CAS_MASK)); - - uint32_t dram_cas_latency = - pci_read_config32(MCHDEV, DRT) & DRT_CAS_MASK; - - switch (dram_cas_latency) { - case DRT_CAS_2_5: - jedec_mode_bits |= SDRAM_CAS_2_5; - break; - - case DRT_CAS_2_0: - jedec_mode_bits |= SDRAM_CAS_2_0; - break; - - default: - BUG(); - break; - } - - do_ram_command(RAM_COMMAND_MRS, jedec_mode_bits); -} - -/*----------------------------------------------------------------------------- -DIMM-independent configuration functions: ------------------------------------------------------------------------------*/ - -/** - * Configure the E7501's DRAM Row Boundary (DRB) registers for the memory - * present in the specified DIMM. - * - * @param dimm_log2_num_bits Specifies log2(number of bits) for each side of - * the DIMM. - * @param total_dram_64M_multiple Total DRAM in the system (as a multiple of - * 64 MB) for DIMMs < dimm_index. - * @param dimm_index Which DIMM pair is being processed - * (0..MAX_DIMM_SOCKETS_PER_CHANNEL). - * @return New multiple of 64 MB total DRAM in the system. - */ -static uint8_t configure_dimm_row_boundaries(struct dimm_size dimm_log2_num_bits, uint8_t total_dram_64M_multiple, unsigned int dimm_index) -{ - int i; - - ASSERT(dimm_index < MAX_DIMM_SOCKETS_PER_CHANNEL); - - // DIMM sides must be at least 32 MB - ASSERT(dimm_log2_num_bits.side1 >= 28); - ASSERT((dimm_log2_num_bits.side2 == 0) - || (dimm_log2_num_bits.side2 >= 28)); - - // In dual-channel mode, we are called only once for each pair of DIMMs. - // Each time we process twice the capacity of a single DIMM. - - // Convert single DIMM capacity to paired DIMM capacity - // (multiply by two ==> add 1 to log2) - dimm_log2_num_bits.side1++; - if (dimm_log2_num_bits.side2 > 0) - dimm_log2_num_bits.side2++; - - // Add the capacity of side 1 this DIMM pair (as a multiple of 64 MB) - // to the total capacity of the system - // NOTE: 64 MB == 512 Mb, and log2(512 Mb) == 29 - - total_dram_64M_multiple += (1 << (dimm_log2_num_bits.side1 - 29)); - - // Configure the boundary address for the row on side 1 - pci_write_config8(MCHDEV, DRB_ROW_0 + (dimm_index << 1), - total_dram_64M_multiple); - - // If the DIMMs are double-sided, add the capacity of side 2 this DIMM pair - // (as a multiple of 64 MB) to the total capacity of the system - if (dimm_log2_num_bits.side2 >= 29) - total_dram_64M_multiple += - (1 << (dimm_log2_num_bits.side2 - 29)); - - // Configure the boundary address for the row (if any) on side 2 - pci_write_config8(MCHDEV, DRB_ROW_1 + (dimm_index << 1), - total_dram_64M_multiple); - - // Update boundaries for rows subsequent to these. - // These settings will be overridden by a subsequent call if a populated physical slot exists - - for (i = dimm_index + 1; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { - pci_write_config8(MCHDEV, DRB_ROW_0 + (i << 1), - total_dram_64M_multiple); - pci_write_config8(MCHDEV, DRB_ROW_1 + (i << 1), - total_dram_64M_multiple); - } - - return total_dram_64M_multiple; -} - -/** - * Set the E7501's DRAM row boundary addresses & its Top Of Low Memory (TOLM). - * - * If necessary, set up a remap window so we don't waste DRAM that ordinarily - * would lie behind addresses reserved for memory-mapped I/O. - * - * @param ctrl PCI addresses of memory controller functions, and SMBus - * addresses of DIMM slots on the mainboard. - * @param dimm_mask Bitmask of populated DIMMs, see spd_get_supported_dimms(). - */ -static void configure_e7501_ram_addresses(const struct mem_controller - *ctrl, uint8_t dimm_mask) -{ - int i; - uint8_t total_dram_64M_multiple = 0; - uint64_t tolm, tom; - uint16_t reg; - - /* FIXME: Is there standard presence detect bit somewhere. */ - const int agp_slot_disabled = 1; - - /* Start with disabled remap range. */ - uint16_t remapbase_r = 0x3ff; - uint16_t remaplimit_r = 0; - - // Configure the E7501's DRAM row boundaries - // Start by zeroing out the temporary initial configuration - pci_write_config32(MCHDEV, DRB_ROW_0, 0); - pci_write_config32(MCHDEV, DRB_ROW_4, 0); - - for (i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { - - uint16_t dimm_socket_address = ctrl->channel0[i]; - struct dimm_size sz; - - if (!(dimm_mask & (1 << i))) - continue; // This DIMM not present - - sz = spd_get_dimm_size(dimm_socket_address); - - RAM_DEBUG_MESSAGE("dimm size ="); - RAM_DEBUG_HEX32((u32)sz.side1); - RAM_DEBUG_MESSAGE(" "); - RAM_DEBUG_HEX32((u32)sz.side2); - RAM_DEBUG_MESSAGE("\n"); - - if (sz.side1 == 0) - die("Bad SPD value\n"); - - total_dram_64M_multiple = - configure_dimm_row_boundaries(sz, total_dram_64M_multiple, i); - } - - tom = total_dram_64M_multiple * 64ULL * MiB; - - /* Reserve MMIO space. */ - tolm = 4ULL * GiB - 512 * MiB; - if (agp_slot_disabled) { - /* Reduce apertures to 2 x 4 MiB. */ - pci_write_config8(MCHDEV, APSIZE, 0x3F); - pci_write_config16(AGPDEV, APSIZE1, 0x3F); - } else { - /* Add MMIO reserve for 2 x 256 MiB apertures. */ - tolm -= 512 * MiB; - } - tolm = MIN(tolm, tom); - - /* The PCI memory hole overlaps memory setup the remap window. */ - if (tolm < tom) { - uint64_t remapbase = MAX(tom, 4ULL * GiB); - uint64_t remaplimit = remapbase + (4ULL * GiB - tolm); - - remapbase_r = remapbase / (64 * MiB); - remaplimit_r = remaplimit / (64 * MiB); - - /* Limit register is inclusive. */ - remaplimit_r -= 1; - } - - /* Write the RAM configuration registers, - preserving the reserved bits. */ - reg = pci_read_config16(MCHDEV, TOLM) & 0x7ff; - reg |= (tolm / (128 * MiB)) << 11; - pci_write_config16(MCHDEV, TOLM, reg); - - reg = pci_read_config16(MCHDEV, REMAPBASE) & 0xfc00; - reg |= remapbase_r; - pci_write_config16(MCHDEV, REMAPBASE, reg); - - reg = pci_read_config16(MCHDEV, REMAPLIMIT) & 0xfc00; - reg |= remaplimit_r; - pci_write_config16(MCHDEV, REMAPLIMIT, reg); -} - -/** - * Program the DRAM Timing register (DRT) of the E7501 (except for CAS# - * latency, which is assumed to have been programmed already), based on the - * parameters of the various installed DIMMs. - * - * @param ctrl PCI addresses of memory controller functions, and SMBus - * addresses of DIMM slots on the mainboard. - * @param dimm_mask Bitmask of populated DIMMs, see spd_get_supported_dimms(). - */ -static void configure_e7501_dram_timing(const struct mem_controller *ctrl, - uint8_t dimm_mask) -{ - int i; - uint32_t dram_timing; - int value; - uint8_t slowest_row_precharge = 0; - uint8_t slowest_ras_cas_delay = 0; - uint8_t slowest_active_to_precharge_delay = 0; - uint32_t current_cas_latency = - pci_read_config32(MCHDEV, DRT) & DRT_CAS_MASK; - - // CAS# latency must be programmed beforehand - ASSERT((current_cas_latency == DRT_CAS_2_0) - || (current_cas_latency == DRT_CAS_2_5)); - - // Each timing parameter is determined by the slowest DIMM - - for (i = 0; i < MAX_DIMM_SOCKETS; i++) { - uint16_t dimm_socket_address; - - if (!(dimm_mask & (1 << i))) - continue; // This DIMM not present - - if (i < MAX_DIMM_SOCKETS_PER_CHANNEL) - dimm_socket_address = ctrl->channel0[i]; - else - dimm_socket_address = - ctrl->channel1[i - MAX_DIMM_SOCKETS_PER_CHANNEL]; - - value = smbus_read_byte(dimm_socket_address, - SPD_MIN_ROW_PRECHARGE_TIME); - if (value < 0) - goto hw_err; - if (value > slowest_row_precharge) - slowest_row_precharge = value; - - value = smbus_read_byte(dimm_socket_address, - SPD_MIN_RAS_TO_CAS_DELAY); - if (value < 0) - goto hw_err; - if (value > slowest_ras_cas_delay) - slowest_ras_cas_delay = value; - - value = smbus_read_byte(dimm_socket_address, - SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY); - if (value < 0) - goto hw_err; - if (value > slowest_active_to_precharge_delay) - slowest_active_to_precharge_delay = value; - } - - // NOTE for timing parameters: - // At 133 MHz, 1 clock == 7.52 ns - - /* Read the initial state */ - dram_timing = pci_read_config32(MCHDEV, DRT); - - /* Trp */ - - // E7501 supports only 2 or 3 clocks for tRP - if (slowest_row_precharge > ((22 << 2) | (2 << 0))) - die("unsupported DIMM tRP"); // > 22.5 ns: 4 or more clocks - else if (slowest_row_precharge > (15 << 2)) - dram_timing &= ~(1 << 0); // > 15.0 ns: 3 clocks - else - dram_timing |= (1 << 0); // <= 15.0 ns: 2 clocks - - /* Trcd */ - - // E7501 supports only 2 or 3 clocks for tRCD - // Use the same value for both read & write - dram_timing &= ~((1 << 3) | (3 << 1)); - if (slowest_ras_cas_delay > ((22 << 2) | (2 << 0))) - die("unsupported DIMM tRCD"); // > 22.5 ns: 4 or more clocks - else if (slowest_ras_cas_delay > (15 << 2)) - dram_timing |= (2 << 1); // > 15.0 ns: 3 clocks - else - dram_timing |= ((1 << 3) | (3 << 1)); // <= 15.0 ns: 2 clocks - - /* Tras */ - - // E7501 supports only 5, 6, or 7 clocks for tRAS - // 5 clocks ~= 37.6 ns, 6 clocks ~= 45.1 ns, 7 clocks ~= 52.6 ns - dram_timing &= ~(3 << 9); - - if (slowest_active_to_precharge_delay > 52) - die("unsupported DIMM tRAS"); // > 52 ns: 8 or more clocks - else if (slowest_active_to_precharge_delay > 45) - dram_timing |= (0 << 9); // 46-52 ns: 7 clocks - else if (slowest_active_to_precharge_delay > 37) - dram_timing |= (1 << 9); // 38-45 ns: 6 clocks - else - dram_timing |= (2 << 9); // < 38 ns: 5 clocks - - /* Trd */ - - /* Set to a 7 clock read delay. This is for 133MHz - * with a CAS latency of 2.5 if 2.0 a 6 clock - * delay is good */ - - dram_timing &= ~(7 << 24); // 7 clocks - if (current_cas_latency == DRT_CAS_2_0) - dram_timing |= (1 << 24); // 6 clocks - - /* - * Back to Back Read-Write Turn Around - */ - /* Set to a 5 clock back to back read to write turn around. - * 4 is a good delay if the CAS latency is 2.0 */ - - dram_timing &= ~(1 << 28); // 5 clocks - if (current_cas_latency == DRT_CAS_2_0) - dram_timing |= (1 << 28); // 4 clocks - - pci_write_config32(MCHDEV, DRT, dram_timing); - - return; - - hw_err: - die(SPD_ERROR); -} - -/** - * Determine the shortest CAS# latency that the E7501 and all DIMMs have in - * common, and program the E7501 to use it. - * - * @param ctrl PCI addresses of memory controller functions, and SMBus - * addresses of DIMM slots on the mainboard. - * @param dimm_mask Bitmask of populated DIMMs, spd_get_supported_dimms(). - */ -static void configure_e7501_cas_latency(const struct mem_controller *ctrl, - uint8_t dimm_mask) -{ - int i; - int value; - uint32_t dram_timing; - uint16_t dram_read_timing; - uint32_t dword; - - // CAS# latency bitmasks in SPD_ACCEPTABLE_CAS_LATENCIES format - // NOTE: E7501 supports only 2.0 and 2.5 - uint32_t system_compatible_cas_latencies = - SPD_CAS_LATENCY_2_0 | SPD_CAS_LATENCY_2_5; - uint32_t current_cas_latency; - uint32_t dimm_compatible_cas_latencies; - - for (i = 0; i < MAX_DIMM_SOCKETS; i++) { - - uint16_t dimm_socket_address; - - if (!(dimm_mask & (1 << i))) - continue; // This DIMM not usable - - if (i < MAX_DIMM_SOCKETS_PER_CHANNEL) - dimm_socket_address = ctrl->channel0[i]; - else - dimm_socket_address = - ctrl->channel1[i - MAX_DIMM_SOCKETS_PER_CHANNEL]; - - value = smbus_read_byte(dimm_socket_address, - SPD_ACCEPTABLE_CAS_LATENCIES); - if (value < 0) - goto hw_err; - - dimm_compatible_cas_latencies = value & 0x7f; // Start with all supported by DIMM - current_cas_latency = 1 << log2(dimm_compatible_cas_latencies); // Max supported by DIMM - - // Can we support the highest CAS# latency? - - value = smbus_read_byte(dimm_socket_address, - SPD_MIN_CYCLE_TIME_AT_CAS_MAX); - if (value < 0) - goto hw_err; - - // NOTE: At 133 MHz, 1 clock == 7.52 ns - if (value > 0x75) { - // Our bus is too fast for this CAS# latency - // Remove it from the bitmask of those supported by the DIMM that are compatible - dimm_compatible_cas_latencies &= ~current_cas_latency; - } - // Can we support the next-highest CAS# latency (max - 0.5)? - - current_cas_latency >>= 1; - if (current_cas_latency != 0) { - value = smbus_read_byte(dimm_socket_address, - SPD_SDRAM_CYCLE_TIME_2ND); - if (value < 0) - goto hw_err; - if (value > 0x75) - dimm_compatible_cas_latencies &= - ~current_cas_latency; - } - // Can we support the next-highest CAS# latency (max - 1.0)? - current_cas_latency >>= 1; - if (current_cas_latency != 0) { - value = smbus_read_byte(dimm_socket_address, - SPD_SDRAM_CYCLE_TIME_3RD); - if (value < 0) - goto hw_err; - if (value > 0x75) - dimm_compatible_cas_latencies &= - ~current_cas_latency; - } - // Restrict the system to CAS# latencies compatible with this DIMM - system_compatible_cas_latencies &= - dimm_compatible_cas_latencies; - - /* go to the next DIMM */ - } - - /* After all of the arduous calculation setup with the fastest - * cas latency I can use. - */ - - dram_timing = pci_read_config32(MCHDEV, DRT); - dram_timing &= ~(DRT_CAS_MASK); - - dram_read_timing = - pci_read_config16(MCHDEV, DRDCTL); - dram_read_timing &= 0xF000; - - if (system_compatible_cas_latencies & SPD_CAS_LATENCY_2_0) { - dram_timing |= DRT_CAS_2_0; - dram_read_timing |= 0x0222; - } else if (system_compatible_cas_latencies & SPD_CAS_LATENCY_2_5) { - - uint32_t dram_row_attributes = - pci_read_config32(MCHDEV, DRA); - - dram_timing |= DRT_CAS_2_5; - - // At CAS# 2.5, DRAM Read Timing (if that's what it its) appears to need a slightly - // different value if all DIMM slots are populated - - if ((dram_row_attributes & 0xff) - && (dram_row_attributes & 0xff00) - && (dram_row_attributes & 0xff0000) - && (dram_row_attributes & 0xff000000)) { - - // All slots populated - dram_read_timing |= 0x0882; - } else { - // Some unpopulated slots - dram_read_timing |= 0x0662; - } - } else - die("No CAS# latencies compatible with all DIMMs!!\n"); - - pci_write_config32(MCHDEV, DRT, dram_timing); - - /* set master DLL reset */ - dword = pci_read_config32(MCHDEV, 0x88); - dword |= (1 << 26); - pci_write_config32(MCHDEV, 0x88, dword); - /* patch try register 88 is undocumented tnz */ - dword &= 0x0ca17fff; - dword |= 0xd14a5000; - pci_write_config32(MCHDEV, 0x88, dword); - - pci_write_config16(MCHDEV, DRDCTL, - dram_read_timing); - - /* clear master DLL reset */ - dword = pci_read_config32(MCHDEV, 0x88); - dword &= ~(1 << 26); - pci_write_config32(MCHDEV, 0x88, dword); - - return; - -hw_err: - die(SPD_ERROR); -} - -/** - * Configure the refresh interval so that we refresh no more often than - * required by the "most needy" DIMM. Also disable ECC if any of the DIMMs - * don't support it. - * - * @param ctrl PCI addresses of memory controller functions, and SMBus - * addresses of DIMM slots on the mainboard. - * @param dimm_mask Bitmask of populated DIMMs, spd_get_supported_dimms(). - */ -static void configure_e7501_dram_controller_mode(const struct - mem_controller *ctrl, - uint8_t dimm_mask) -{ - int i; - - // Initial settings - uint32_t controller_mode = - pci_read_config32(MCHDEV, DRC); - uint32_t system_refresh_mode = (controller_mode >> 8) & 7; - - // Code below assumes that most aggressive settings are in - // force when we are called, either via E7501 reset defaults - // or by sdram_set_registers(): - // - ECC enabled - // - No refresh - - ASSERT((controller_mode & (3 << 20)) == (2 << 20)); // ECC - ASSERT(!(controller_mode & (7 << 8))); // Refresh - - /* Walk through _all_ dimms and find the least-common denominator for: - * - ECC support - * - refresh rates - */ - - for (i = 0; i < MAX_DIMM_SOCKETS; i++) { - - uint32_t dimm_refresh_mode; - int value; - uint16_t dimm_socket_address; - - if (!(dimm_mask & (1 << i))) { - continue; // This DIMM not usable - } - - if (i < MAX_DIMM_SOCKETS_PER_CHANNEL) - dimm_socket_address = ctrl->channel0[i]; - else - dimm_socket_address = - ctrl->channel1[i - - MAX_DIMM_SOCKETS_PER_CHANNEL]; - - // Disable ECC mode if any one of the DIMMs does not support ECC - // SJM: Should we just die here? E7501 datasheet says non-ECC DIMMs aren't supported. - - value = smbus_read_byte(dimm_socket_address, - SPD_DIMM_CONFIG_TYPE); - die_on_spd_error(value); - if (value != ERROR_SCHEME_ECC) { - controller_mode &= ~(3 << 20); - } - - value = smbus_read_byte(dimm_socket_address, SPD_REFRESH); - die_on_spd_error(value); - value &= 0x7f; // Mask off self-refresh bit - if (value > MAX_SPD_REFRESH_RATE) { - printk(BIOS_ERR, "unsupported refresh rate\n"); - continue; - } - // Get the appropriate E7501 refresh mode for this DIMM - dimm_refresh_mode = refresh_rate_map[value]; - if (dimm_refresh_mode > 7) { - printk(BIOS_ERR, "unsupported refresh rate\n"); - continue; - } - // If this DIMM requires more frequent refresh than others, - // update the system setting - if (refresh_frequency[dimm_refresh_mode] > - refresh_frequency[system_refresh_mode]) - system_refresh_mode = dimm_refresh_mode; - - /* go to the next DIMM */ - } - - controller_mode |= (system_refresh_mode << 8); - - // Configure the E7501 - pci_write_config32(MCHDEV, DRC, controller_mode); -} - -/** - * Configure the E7501's DRAM Row Attributes (DRA) registers based on DIMM - * parameters read via SPD. This tells the controller the width of the SDRAM - * chips on each DIMM side (x4 or x8) and the page size of each DIMM side - * (4, 8, 16, or 32 KB). - * - * @param ctrl PCI addresses of memory controller functions, and SMBus - * addresses of DIMM slots on the mainboard. - * @param dimm_mask Bitmask of populated DIMMs, spd_get_supported_dimms(). - */ -static void configure_e7501_row_attributes(const struct mem_controller - *ctrl, uint8_t dimm_mask) -{ - int i; - uint32_t row_attributes = 0; - - for (i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { - - uint16_t dimm_socket_address = ctrl->channel0[i]; - struct dimm_size page_size; - struct dimm_size sdram_width; - - if (!(dimm_mask & (1 << i))) - continue; // This DIMM not usable - - // Get the relevant parameters via SPD - page_size = sdram_spd_get_page_size(dimm_socket_address); - sdram_width = sdram_spd_get_width(dimm_socket_address); - - // Update the DRAM Row Attributes. - // Page size is encoded as log2(page size in bits) - log2(8 Kb) - // NOTE: 8 Kb = 2^13 - row_attributes |= (page_size.side1 - 13) << (i << 3); // Side 1 of each DIMM is an EVEN row - - if (sdram_width.side2 > 0) - row_attributes |= (page_size.side2 - 13) << ((i << 3) + 4); // Side 2 is ODD - - // Set x4 flags if appropriate - if (sdram_width.side1 == 4) { - row_attributes |= 0x08 << (i << 3); - } - - if (sdram_width.side2 == 4) { - row_attributes |= 0x08 << ((i << 3) + 4); - } - - /* go to the next DIMM */ - } - - /* Write the new row attributes register */ - pci_write_config32(MCHDEV, DRA, row_attributes); -} - -/* - * Enable clock signals for populated DIMM sockets and disable them for - * unpopulated sockets (to reduce EMI). - * - * @param dimm_mask Bitmask of populated DIMMs, see spd_get_supported_dimms(). - */ -static void enable_e7501_clocks(uint8_t dimm_mask) -{ - int i; - uint8_t clock_disable = pci_read_config8(MCHDEV, CKDIS); - - pci_write_config8(MCHDEV, 0x8e, 0xb0); - - for (i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { - - uint8_t socket_mask = 1 << i; - - if (dimm_mask & socket_mask) - clock_disable &= ~socket_mask; // DIMM present, enable clock - else - clock_disable |= socket_mask; // DIMM absent, disable clock - } - - pci_write_config8(MCHDEV, CKDIS, clock_disable); -} - -/* DIMM-dependent configuration functions */ - -/** - * DDR Receive FIFO RE-Sync (?) - */ -static void RAM_RESET_DDR_PTR(void) -{ - uint8_t byte; - byte = pci_read_config8(MCHDEV, 0x88); - byte |= (1 << 4); - pci_write_config8(MCHDEV, 0x88, byte); - - byte = pci_read_config8(MCHDEV, 0x88); - byte &= ~(1 << 4); - pci_write_config8(MCHDEV, 0x88, byte); -} - -/** - * Copy 64 bytes from one location to another. - * - * @param src_addr TODO - * @param dst_addr TODO - */ -static void write_8dwords(const uint32_t *src_addr, u8 *dst_addr) -{ - int i; - for (i = 0; i < 8; i++) { - write32(dst_addr, *src_addr); - src_addr++; - dst_addr += sizeof(uint32_t); - } -} - -/** - * Set the E7501's (undocumented) RCOMP registers. - * - * Per the 855PM datasheet and IXP2800 HW Initialization Reference Manual, - * RCOMP registers appear to affect drive strength, pullup/pulldown offset, - * and slew rate of various signal groups. - * - * Comments below are conjecture based on apparent similarity between the - * E7501 and these two chips. - */ -static void rcomp_copy_registers(void) -{ - uint32_t dword; - uint8_t strength_control; - - RAM_DEBUG_MESSAGE("Setting RCOMP registers.\n"); - - /* Begin to write the RCOMP registers */ - write8(RCOMP_MMIO + 0x2c, 0x0); - - // Set CMD and DQ/DQS strength to 2x (?) - strength_control = read8(RCOMP_MMIO + DQCMDSTR) & 0x88; - strength_control |= 0x40; - write8(RCOMP_MMIO + DQCMDSTR, strength_control); - write_8dwords(slew_2x, RCOMP_MMIO + 0x80); - write16(RCOMP_MMIO + 0x42, 0); - - // Set CMD and DQ/DQS strength to 2x (?) - strength_control = read8(RCOMP_MMIO + DQCMDSTR) & 0xF8; - strength_control |= 0x04; - write8(RCOMP_MMIO + DQCMDSTR, strength_control); - write_8dwords(slew_2x, RCOMP_MMIO + 0x60); - write16(RCOMP_MMIO + 0x40, 0); - - // Set RCVEnOut# strength to 2x (?) - strength_control = read8(RCOMP_MMIO + RCVENSTR) & 0xF8; - strength_control |= 0x04; - write8(RCOMP_MMIO + RCVENSTR, strength_control); - write_8dwords(slew_2x, RCOMP_MMIO + 0x1c0); - write16(RCOMP_MMIO + 0x50, 0); - - // Set CS# strength for x4 SDRAM to 2x (?) - strength_control = read8(RCOMP_MMIO + CSBSTR) & 0x88; - strength_control |= 0x04; - write8(RCOMP_MMIO + CSBSTR, strength_control); - write_8dwords(slew_2x, RCOMP_MMIO + 0x140); - write16(RCOMP_MMIO + 0x48, 0); - - // Set CS# strength for x4 SDRAM to 2x (?) - strength_control = read8(RCOMP_MMIO + CSBSTR) & 0x8F; - strength_control |= 0x40; - write8(RCOMP_MMIO + CSBSTR, strength_control); - write_8dwords(slew_2x, RCOMP_MMIO + 0x160); - write16(RCOMP_MMIO + 0x4a, 0); - - // Set CKE strength for x4 SDRAM to 2x (?) - strength_control = read8(RCOMP_MMIO + CKESTR) & 0x88; - strength_control |= 0x04; - write8(RCOMP_MMIO + CKESTR, strength_control); - write_8dwords(slew_2x, RCOMP_MMIO + 0xa0); - write16(RCOMP_MMIO + 0x44, 0); - - // Set CKE strength for x4 SDRAM to 2x (?) - strength_control = read8(RCOMP_MMIO + CKESTR) & 0x8F; - strength_control |= 0x40; - write8(RCOMP_MMIO + CKESTR, strength_control); - write_8dwords(slew_2x, RCOMP_MMIO + 0xc0); - write16(RCOMP_MMIO + 0x46, 0); - - // Set CK strength for x4 SDRAM to 1x (?) - strength_control = read8(RCOMP_MMIO + CKSTR) & 0x88; - strength_control |= 0x01; - write8(RCOMP_MMIO + CKSTR, strength_control); - write_8dwords(pull_updown_offset_table, RCOMP_MMIO + 0x180); - write16(RCOMP_MMIO + 0x4c, 0); - - // Set CK strength for x4 SDRAM to 1x (?) - strength_control = read8(RCOMP_MMIO + CKSTR) & 0x8F; - strength_control |= 0x10; - write8(RCOMP_MMIO + CKSTR, strength_control); - write_8dwords(pull_updown_offset_table, RCOMP_MMIO + 0x1a0); - write16(RCOMP_MMIO + 0x4e, 0); - - dword = read32(RCOMP_MMIO + 0x400); - dword &= 0x7f7fffff; - write32(RCOMP_MMIO + 0x400, dword); - - dword = read32(RCOMP_MMIO + 0x408); - dword &= 0x7f7fffff; - write32(RCOMP_MMIO + 0x408, dword); -} - -static void ram_set_rcomp_regs(void) -{ - /* Set the RCOMP MMIO base address */ - mchtest_control(RCOMP_BAR_ENABLE); - pci_write_config32(MCHDEV, SMRBASE, (uintptr_t)RCOMP_MMIO); - - /* Block RCOMP updates while we configure the registers */ - rcomp_smr_control(RCOMP_HOLD); - rcomp_copy_registers(); - d060_control(D060_CMD_0); - mchtest_control(MCHTST_CMD_0); - - uint8_t revision = pci_read_config8(MCHDEV, 0x08); - if (revision >= 3) { - rcomp_smr_control(RCOMP_SMR_00); - rcomp_smr_control(RCOMP_SMR_01); - } - rcomp_smr_control(RCOMP_RELEASE); - - /* Wait 40 usec */ - SLOW_DOWN_IO; - - /* Clear the RCOMP MMIO base address */ - pci_write_config32(MCHDEV, SMRBASE, 0); - mchtest_control(RCOMP_BAR_DISABLE); -} - -/*----------------------------------------------------------------------------- -Public interface: ------------------------------------------------------------------------------*/ - -/** - * Go through the JEDEC initialization sequence for all DIMMs, then enable - * refresh and initialize ECC and memory to zero. Upon exit, SDRAM is up - * and running. - * - * @param ctrl PCI addresses of memory controller functions, and SMBus - * addresses of DIMM slots on the mainboard. - */ -static void sdram_enable(const struct mem_controller *ctrl) -{ - uint8_t dimm_mask = pci_read_config16(MCHDEV, SKPD); - uint32_t dram_controller_mode; - - if (dimm_mask == 0) - return; - - /* 1 & 2 Power up and start clocks */ - RAM_DEBUG_MESSAGE("Ram Enable 1\n"); - RAM_DEBUG_MESSAGE("Ram Enable 2\n"); - - /* A 200us delay is needed */ - DO_DELAY; EXTRA_DELAY; - - /* 3. Apply NOP */ - RAM_DEBUG_MESSAGE("Ram Enable 3\n"); - do_ram_command(RAM_COMMAND_NOP, 0); - - /* 4 Precharge all */ - RAM_DEBUG_MESSAGE("Ram Enable 4\n"); - do_ram_command(RAM_COMMAND_PRECHARGE, 0); - /* wait until the all banks idle state... */ - - /* 5. Issue EMRS to enable DLL */ - RAM_DEBUG_MESSAGE("Ram Enable 5\n"); - do_ram_command(RAM_COMMAND_EMRS, - SDRAM_EXTMODE_DLL_ENABLE | - SDRAM_EXTMODE_DRIVE_NORMAL); - - /* 6. Reset DLL */ - RAM_DEBUG_MESSAGE("Ram Enable 6\n"); - set_ram_mode(E7501_SDRAM_MODE | SDRAM_MODE_DLL_RESET); - EXTRA_DELAY; - /* Ensure a 200us delay between the DLL reset in step 6 and the final - * mode register set in step 9. - * Infineon needs this before any other command is sent to the ram. - */ - DO_DELAY; EXTRA_DELAY; - - /* 7 Precharge all */ - RAM_DEBUG_MESSAGE("Ram Enable 7\n"); - do_ram_command(RAM_COMMAND_PRECHARGE, 0); - - /* 8 Now we need 2 AUTO REFRESH / CBR cycles to be performed */ - /* And for good luck 6 more CBRs */ - RAM_DEBUG_MESSAGE("Ram Enable 8\n"); - int i; - for (i = 0; i < 8; i++) - do_ram_command(RAM_COMMAND_CBR, 0); - - /* 9 mode register set */ - RAM_DEBUG_MESSAGE("Ram Enable 9\n"); - set_ram_mode(E7501_SDRAM_MODE | SDRAM_MODE_NORMAL); - - /* 10 DDR Receive FIFO RE-Sync */ - RAM_DEBUG_MESSAGE("Ram Enable 10\n"); - RAM_RESET_DDR_PTR(); - EXTRA_DELAY; - - /* 11 normal operation */ - RAM_DEBUG_MESSAGE("Ram Enable 11\n"); - do_ram_command(RAM_COMMAND_NORMAL, 0); - - // Reconfigure the row boundaries and Top of Low Memory - // to match the true size of the DIMMs - configure_e7501_ram_addresses(ctrl, dimm_mask); - - /* Finally enable refresh */ - dram_controller_mode = pci_read_config32(MCHDEV, DRC); - dram_controller_mode |= (1 << 29); - pci_write_config32(MCHDEV, DRC, dram_controller_mode); - EXTRA_DELAY; -} - -/** - * @param ctrl PCI addresses of memory controller functions, and SMBus - * addresses of DIMM slots on the mainboard. - */ -static void sdram_post_ecc(const struct mem_controller *ctrl) -{ - /* Fast CS# Enable. */ - uint32_t dram_controller_mode = pci_read_config32(MCHDEV, DRC); - dram_controller_mode = pci_read_config32(MCHDEV, DRC); - dram_controller_mode |= (1 << 17); - pci_write_config32(MCHDEV, DRC, dram_controller_mode); -} - -/** - * Configure SDRAM controller parameters that depend on characteristics of the - * DIMMs installed in the system. These characteristics are read from the - * DIMMs via the standard Serial Presence Detect (SPD) interface. - * - * @param ctrl PCI addresses of memory controller functions, and SMBus - * addresses of DIMM slots on the mainboard. - */ -static void sdram_set_spd_registers(const struct mem_controller *ctrl) -{ - uint8_t dimm_mask; - - RAM_DEBUG_MESSAGE("Reading SPD data...\n"); - - dimm_mask = spd_get_supported_dimms(ctrl); - - if (dimm_mask == 0) { - printk(BIOS_DEBUG, "No usable memory for this controller\n"); - } else { - enable_e7501_clocks(dimm_mask); - - RAM_DEBUG_MESSAGE("setting based on SPD data...\n"); - - configure_e7501_row_attributes(ctrl, dimm_mask); - configure_e7501_dram_controller_mode(ctrl, dimm_mask); - configure_e7501_cas_latency(ctrl, dimm_mask); - RAM_RESET_DDR_PTR(); - - configure_e7501_dram_timing(ctrl, dimm_mask); - DO_DELAY; - RAM_DEBUG_MESSAGE("done\n"); - } - - /* NOTE: configure_e7501_ram_addresses() is NOT called here. - * We want to keep the default 64 MB/row mapping until sdram_enable() is called, - * even though the default mapping is almost certainly incorrect. - * The default mapping makes it easy to initialize all of the DIMMs - * even if the total system memory is > 4 GB. - * - * Save the dimm_mask for when sdram_enable is called, so it can call - * configure_e7501_ram_addresses() without having to regenerate the bitmask - * of usable DIMMs. - */ - pci_write_config16(MCHDEV, SKPD, dimm_mask); -} - -/** - * Do basic RAM setup that does NOT depend on serial presence detect - * information (i.e. independent of DIMM specifics). - * - * @param ctrl PCI addresses of memory controller functions, and SMBus - * addresses of DIMM slots on the mainboard. - */ -static void sdram_set_registers(const struct mem_controller *ctrl) -{ - uint32_t dword; - uint16_t word; - uint8_t byte; - - ram_set_rcomp_regs(); - - /* Enable 0:0.1, 0:2.1 */ - word = pci_read_config16(MCHDEV, DVNP); - word &= ~0x05; - pci_write_config16(MCHDEV, DVNP, word); - - /* Disable high-memory remap (power-on defaults, really) */ - pci_write_config16(MCHDEV, REMAPBASE, 0x03ff); - pci_write_config16(MCHDEV, REMAPLIMIT, 0x0); - - /* Disable legacy MMIO (0xC0000-0xEFFFF is DRAM) */ - int i; - pci_write_config8(MCHDEV, PAM_0, 0x30); - for (i = 1; i <= 6; i++) - pci_write_config8(MCHDEV, PAM_0 + i, 0x33); - - /* Conservatively say each row has 64MB of ram, we will fix this up later - * Initial TOLM 8 rows 64MB each (1<<3 * 1<<26) >> 16 = 1<<13 - * - * FIXME: Hard-coded limit to first four rows to prevent overlap! - */ - pci_write_config32(MCHDEV, DRB_ROW_0, 0x04030201); - pci_write_config32(MCHDEV, DRB_ROW_4, 0x04040404); - //pci_write_config32(MCHDEV, DRB_ROW_4, 0x08070605); - pci_write_config16(MCHDEV, TOLM, (1<<13)); - - /* DIMM clocks off */ - pci_write_config8(MCHDEV, CKDIS, 0xff); - - /* reset row attributes */ - pci_write_config32(MCHDEV, DRA, 0x0); - - // The only things we need to set here are DRAM idle timer, Back-to-Back Read Turnaround, and - // Back-to-Back Write-Read Turnaround. All others are configured based on SPD. - dword = pci_read_config32(MCHDEV, DRT); - dword &= 0xC7F8FFFF; - dword |= (0x28<<24)|(0x03<<16); - pci_write_config32(MCHDEV, DRT, dword); - - dword = pci_read_config32(MCHDEV, DRC); - dword &= 0xffcef8f7; - dword |= 0x00210008; - pci_write_config32(MCHDEV, DRC, dword); - - /* Undocumented */ - pci_write_config8(MCHDEV, 0x88, 0x80); - - /* Undocumented. Set much later in vendor BIOS. */ - byte = pci_read_config8(MCHDEV, 0xd9); - byte &= ~0x60; - pci_write_config8(MCHDEV, 0xd9, byte); - - uint8_t revision = pci_read_config8(MCHDEV, 0x08); - if (revision >= 3) - d060_control(D060_CMD_1); -} - -static int e7505_mch_is_ready(void) -{ - uint32_t dword = pci_read_config32(MCHDEV, DRC); - return !!(dword & DRC_DONE); -} - -void sdram_initialize(void) -{ - static const struct mem_controller memctrl[] = { - { - .d0 = PCI_DEV(0, 0, 0), - .d0f1 = PCI_DEV(0, 0, 1), - .channel0 = { 0x50, 0x52, 0, 0 }, - .channel1 = { 0x51, 0x53, 0, 0 }, - }, - }; - - /* If this is a warm boot, some initialisation can be skipped */ - if (!e7505_mch_is_ready()) { - - /* The real MCH initialisation. */ - timestamp_add_now(TS_INITRAM_START); - - sdram_set_registers(memctrl); - sdram_set_spd_registers(memctrl); - sdram_enable(memctrl); - - /* Hook for post ECC scrub settings and debug. */ - sdram_post_ecc(memctrl); - - timestamp_add_now(TS_INITRAM_END); - } - - printk(BIOS_DEBUG, "SDRAM is up.\n"); -} diff --git a/src/northbridge/intel/e7505/raminit.h b/src/northbridge/intel/e7505/raminit.h deleted file mode 100644 index 1e0128c..0000000 --- a/src/northbridge/intel/e7505/raminit.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef RAMINIT_H -#define RAMINIT_H - -#include <stdint.h> - -#define MAX_DIMM_SOCKETS_PER_CHANNEL 4 -#define MAX_NUM_CHANNELS 2 -#define MAX_DIMM_SOCKETS (MAX_NUM_CHANNELS * MAX_DIMM_SOCKETS_PER_CHANNEL) - -struct mem_controller { - pci_devfn_t d0, d0f1; // PCI bus/device/fcns of E7501 memory controller - - // SMBus addresses of DIMM slots for each channel, - // in order from closest to MCH to furthest away - // 0 == not present - uint16_t channel0[MAX_DIMM_SOCKETS_PER_CHANNEL]; - uint16_t channel1[MAX_DIMM_SOCKETS_PER_CHANNEL]; -}; - -void sdram_initialize(void); - -#endif /* RAMINIT_H */ diff --git a/src/northbridge/intel/e7505/romstage.c b/src/northbridge/intel/e7505/romstage.c deleted file mode 100644 index df10f9d..0000000 --- a/src/northbridge/intel/e7505/romstage.c +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <cbmem.h> -#include <arch/romstage.h> - -#include <southbridge/intel/i82801dx/i82801dx.h> -#include <northbridge/intel/e7505/raminit.h> - -void mainboard_romstage_entry(void) -{ - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - i82801dx_early_init(); - - sdram_initialize(); - - cbmem_recovery(0); -} diff --git a/src/southbridge/intel/common/smbus.c b/src/southbridge/intel/common/smbus.c index 8b19b7d..0e65cda 100644 --- a/src/southbridge/intel/common/smbus.c +++ b/src/southbridge/intel/common/smbus.c @@ -457,8 +457,7 @@ /* Only since ICH5 */ static int has_i2c_read_command(void) { - if (CONFIG(SOUTHBRIDGE_INTEL_I82371EB) || - CONFIG(SOUTHBRIDGE_INTEL_I82801DX)) + if (CONFIG(SOUTHBRIDGE_INTEL_I82371EB)) return 0; return 1; } diff --git a/src/southbridge/intel/i82801dx/Kconfig b/src/southbridge/intel/i82801dx/Kconfig deleted file mode 100644 index 0117cf2..0000000 --- a/src/southbridge/intel/i82801dx/Kconfig +++ /dev/null @@ -1,22 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -config SOUTHBRIDGE_INTEL_I82801DX - bool - select ACPI_INTEL_HARDWARE_SLEEP_VALUES - select HAVE_SMI_HANDLER - select SOUTHBRIDGE_INTEL_COMMON_SMBUS - select SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS - select SOUTHBRIDGE_INTEL_COMMON_RTC - select SOUTHBRIDGE_INTEL_COMMON_RESET - select SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG - select HAVE_POWER_STATE_AFTER_FAILURE - select HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE - select BOOT_DEVICE_NOT_SPI_FLASH - -if SOUTHBRIDGE_INTEL_I82801DX - -config EHCI_BAR - hex - default 0xfef00000 - -endif diff --git a/src/southbridge/intel/i82801dx/Makefile.inc b/src/southbridge/intel/i82801dx/Makefile.inc deleted file mode 100644 index ff10091..0000000 --- a/src/southbridge/intel/i82801dx/Makefile.inc +++ /dev/null @@ -1,23 +0,0 @@ -## SPDX-License-Identifier: GPL-2.0-only - -ifeq ($(CONFIG_SOUTHBRIDGE_INTEL_I82801DX),y) - -ramstage-y += i82801dx.c -ramstage-y += ac97.c -ramstage-y += fadt.c -ramstage-y += ide.c -ramstage-y += lpc.c -#ramstage-y += pci.c -ramstage-y += usb.c -ramstage-y += usb2.c - -ramstage-$(CONFIG_SMM_LEGACY_ASEG) += smi.c -ramstage-$(CONFIG_SMM_LEGACY_ASEG) += ../../../cpu/x86/smm/smmrelocate.S - -smm-y += smihandler.c - -romstage-y += early_smbus.c - -bootblock-y += bootblock.c - -endif diff --git a/src/southbridge/intel/i82801dx/ac97.c b/src/southbridge/intel/i82801dx/ac97.c deleted file mode 100644 index 6e8b6d2..0000000 --- a/src/southbridge/intel/i82801dx/ac97.c +++ /dev/null @@ -1,263 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pci_ops.h> -#include <delay.h> -#include "i82801dx.h" - -#define NAMBAR 0x10 -#define MASTER_VOL 0x02 -#define PAGING 0x24 -#define EXT_AUDIO 0x28 -#define FUNC_SEL 0x66 -#define INFO_IO 0x68 -#define CONNECTOR 0x6a -#define VENDOR_ID1 0x7c -#define VENDOR_ID2 0x7e -#define SEC_VENDOR_ID1 0xfc -#define SEC_VENDOR_ID2 0xfe - -#define NABMBAR 0x14 -#define GLOB_CNT 0x2c -#define GLOB_STA 0x30 -#define CAS 0x34 - -#define MMBAR 0x10 -#define EXT_MODEM_ID1 0x3c -#define EXT_MODEM_ID2 0xbc - -#define MBAR 0x14 -#define SEC_CODEC 0x40 - -/* FIXME. This table is probably mainboard specific */ -static u16 ac97_function[16*2][4] = { - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) }, - { (1 << 5), (2 << 11), (1 << 10), (3 << 13) } -}; - -static u16 nabmbar; -static u16 nambar; - -static int ac97_semaphore(void) -{ - int timeout; - u8 reg8; - - timeout = 0xffff; - do { - reg8 = inb(nabmbar + CAS); - timeout--; - } while ((reg8 & 1) && timeout); - if (! timeout) { - printk(BIOS_DEBUG, "Timeout!\n"); - } - - return (!timeout); -} - -static void init_cnr(void) -{ - // TODO -} - -static void program_sigid(struct device *dev, u32 id) -{ - pci_write_config32(dev, 0x2c, id); -} - -static void ac97_audio_init(struct device *dev) -{ - u16 reg16; - u32 reg32; - int i; - - printk(BIOS_DEBUG, "Initializing AC'97 Audio.\n"); - - /* top 16 bits are zero, so don't read them */ - nabmbar = pci_read_config16(dev, NABMBAR) & 0xfffe; - nambar = pci_read_config16(dev, NAMBAR) & 0xfffe; - - reg16 = inw(nabmbar + GLOB_CNT); - reg16 |= (1 << 1); /* Remove AC_RESET# */ - outw(reg16, nabmbar + GLOB_CNT); - - /* Wait 600ms. Ouch. */ - udelay(600 * 1000); - - init_cnr(); - - /* Detect Primary AC'97 Codec */ - reg32 = inl(nabmbar + GLOB_STA); - if ((reg32 & ((1 << 28) | (1 << 9) | (1 << 8))) == 0) { - /* Primary Codec not found */ - printk(BIOS_DEBUG, "No primary codec. Disabling AC'97 Audio.\n"); - return; - } - - ac97_semaphore(); - - /* Detect if codec is programmable */ - outw(0x8000, nambar + MASTER_VOL); - ac97_semaphore(); - if (inw(nambar + MASTER_VOL) != 0x8000) { - printk(BIOS_DEBUG, "Codec not programmable. Disabling AC'97 Audio.\n"); - return; - } - - /* Program Vendor IDs */ - reg32 = inw(nambar + VENDOR_ID1); - reg32 <<= 16; - reg32 |= (u16)inw(nambar + VENDOR_ID2); - - program_sigid(dev, reg32); - - /* Is Codec AC'97 2.3 compliant? */ - reg16 = inw(nambar + EXT_AUDIO); - /* [11:10] = 10b -> AC'97 2.3 */ - if ((reg16 & 0x0c00) != 0x0800) { - /* No 2.3 Codec. We're done */ - return; - } - - /* Select Page 1 */ - reg16 = inw(nambar + PAGING); - reg16 &= 0xfff0; - reg16 |= 0x0001; - outw(reg16, nambar + PAGING); - - for (i = 0x0a * 2; i > 0; i--) { - outw(i, nambar + FUNC_SEL); - - /* Function could not be selected. Next one */ - if (inw(nambar + FUNC_SEL) != i) - continue; - - reg16 = inw(nambar + INFO_IO); - - /* Function Information present? */ - if (!(reg16 & (1 << 0))) - continue; - - /* Function Information valid? */ - if (!(reg16 & (1 << 4))) - continue; - - /* Program Buffer Delay [9:5] */ - reg16 &= 0x03e0; - reg16 |= ac97_function[i][0]; - - /* Program Gain [15:11] */ - reg16 |= ac97_function[i][1]; - - /* Program Inversion [10] */ - reg16 |= ac97_function[i][2]; - - outw(reg16, nambar + INFO_IO); - - /* Program Connector / Jack Location */ - reg16 = inw(nambar + CONNECTOR); - reg16 &= 0x1fff; - reg16 |= ac97_function[i][3]; - outw(reg16, nambar + CONNECTOR); - } -} - -static void ac97_modem_init(struct device *dev) -{ - u16 reg16; - u32 reg32; - u16 mmbar, mbar; - - mmbar = pci_read_config16(dev, MMBAR) & 0xfffe; - mbar = pci_read_config16(dev, MBAR) & 0xfffe; - - reg16 = inw(mmbar + EXT_MODEM_ID1); - if ((reg16 & 0xc000) != 0xc000) { - if (reg16 & (1 << 0)) { - reg32 = inw(mmbar + VENDOR_ID2); - reg32 <<= 16; - reg32 |= (u16)inw(mmbar + VENDOR_ID1); - program_sigid(dev, reg32); - return; - } - } - - /* Secondary codec? */ - reg16 = inw(mbar + SEC_CODEC); - if ((reg16 & (1 << 9)) == 0) - return; - - reg16 = inw(mmbar + EXT_MODEM_ID2); - if ((reg16 & 0xc000) == 0x4000) { - if (reg16 & (1 << 0)) { - reg32 = inw(mmbar + SEC_VENDOR_ID2); - reg32 <<= 16; - reg32 |= (u16)inw(mmbar + SEC_VENDOR_ID1); - program_sigid(dev, reg32); - return; - } - } -} - -static struct device_operations ac97_audio_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .enable = i82801dx_enable, - .init = ac97_audio_init, -}; - -static struct device_operations ac97_modem_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .enable = i82801dx_enable, - .init = ac97_modem_init, -}; - -/* 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) */ -static const struct pci_driver i82801db_ac97_audio __pci_driver = { - .ops = &ac97_audio_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82801DB_AC97_AUDIO, -}; - -static const struct pci_driver i82801db_ac97_modem __pci_driver = { - .ops = &ac97_modem_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82801DB_AC97_MODEM, -}; diff --git a/src/southbridge/intel/i82801dx/bootblock.c b/src/southbridge/intel/i82801dx/bootblock.c deleted file mode 100644 index 6cda0a8..0000000 --- a/src/southbridge/intel/i82801dx/bootblock.c +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <arch/bootblock.h> -#include <device/pci_ops.h> - -void bootblock_early_southbridge_init(void) -{ - /* Set FWH IDs for 2 MB flash part. */ - if (CONFIG_ROM_SIZE == 0x200000) - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xe8, 0x00001111); -} diff --git a/src/southbridge/intel/i82801dx/chip.h b/src/southbridge/intel/i82801dx/chip.h deleted file mode 100644 index 50f4f1c..0000000 --- a/src/southbridge/intel/i82801dx/chip.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef I82801DX_CHIP_H -#define I82801DX_CHIP_H - -#include <stdint.h> - -struct southbridge_intel_i82801dx_config { - int enable_usb; - int enable_native_ide; - /** - * Interrupt Routing configuration - * If bit7 is 1, the interrupt is disabled. - */ - uint8_t pirqa_routing; - uint8_t pirqb_routing; - uint8_t pirqc_routing; - uint8_t pirqd_routing; - uint8_t pirqe_routing; - uint8_t pirqf_routing; - uint8_t pirqg_routing; - uint8_t pirqh_routing; - - uint8_t ide0_enable; - uint8_t ide1_enable; -}; - -#endif /* I82801DX_CHIP_H */ diff --git a/src/southbridge/intel/i82801dx/early_smbus.c b/src/southbridge/intel/i82801dx/early_smbus.c deleted file mode 100644 index 76ef1b8..0000000 --- a/src/southbridge/intel/i82801dx/early_smbus.c +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <device/smbus_host.h> -#include "i82801dx.h" - -void i82801dx_early_init(void) -{ - enable_smbus(); -} diff --git a/src/southbridge/intel/i82801dx/fadt.c b/src/southbridge/intel/i82801dx/fadt.c deleted file mode 100644 index e12b2ca..0000000 --- a/src/southbridge/intel/i82801dx/fadt.c +++ /dev/null @@ -1,80 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <device/pci_ops.h> -#include <acpi/acpi.h> -#include <version.h> - -/* FIXME: This needs to go into a separate .h file - * to be included by the ich7 smi handler, ich7 smi init - * code and the mainboard fadt. - */ -#define APM_CNT 0x0 /* ACPI mode only */ -#define CST_CONTROL 0x85 -#define PST_CONTROL 0x0 -#define ACPI_DISABLE 0xAA -#define ACPI_ENABLE 0x55 -#define S4_BIOS 0x77 -#define GNVS_UPDATE 0xea - -void acpi_fill_fadt(acpi_fadt_t *fadt) -{ - u16 pmbase = pci_read_config16(pcidev_on_root(0x1f, 0), 0x40) & 0xfffe; - - fadt->sci_int = 0x9; - - if (permanent_smi_handler()) { - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = ACPI_ENABLE; - fadt->acpi_disable = ACPI_DISABLE; - fadt->pstate_cnt = PST_CONTROL; - } - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x28; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->p_lvl2_lat = 1; - fadt->p_lvl3_lat = 85; - fadt->duty_offset = 1; - fadt->duty_width = 0; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; - - fadt->flags |= ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; - - fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm1a_evt_blk.bit_width = fadt->pm1_evt_len * 8; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_UNDEFINED; - fadt->x_pm1a_evt_blk.addrl = fadt->pm1a_evt_blk; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm1a_cnt_blk.bit_width = fadt->pm1_cnt_len * 8; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_UNDEFINED; - fadt->x_pm1a_cnt_blk.addrl = fadt->pm1a_cnt_blk; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm_tmr_blk.bit_width = fadt->pm_tmr_len * 8; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_UNDEFINED; - fadt->x_pm_tmr_blk.addrl = fadt->pm_tmr_blk; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_gpe0_blk.bit_width = fadt->gpe0_blk_len * 8; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_UNDEFINED; - fadt->x_gpe0_blk.addrl = fadt->gpe0_blk; - fadt->x_gpe0_blk.addrh = 0x0; -} diff --git a/src/southbridge/intel/i82801dx/i82801dx.c b/src/southbridge/intel/i82801dx/i82801dx.c deleted file mode 100644 index 921cb1c..0000000 --- a/src/southbridge/intel/i82801dx/i82801dx.c +++ /dev/null @@ -1,67 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ops.h> -#include "i82801dx.h" - -void i82801dx_enable(struct device *dev) -{ - unsigned int index = 0; - uint8_t bHasDisableBit = 0; - uint16_t cur_disable_mask, new_disable_mask; - -// all 82801dbm devices are in bus 0 - unsigned int devfn = PCI_DEVFN(0x1f, 0); // lpc - struct device *lpc_dev = pcidev_path_on_root(devfn); // 0 - if (!lpc_dev) - return; - - // Calculate disable bit position for specified device:function - // NOTE: For ICH-4, only the following devices can be disabled: - // D31: F0, F1, F3, F5, F6, - // D29: F0, F1, F2, F7 - - if (PCI_SLOT(dev->path.pci.devfn) == 31) { - index = PCI_FUNC(dev->path.pci.devfn); - - switch (index) { - case 0: - case 1: - case 3: - case 5: - case 6: - bHasDisableBit = 1; - break; - - default: - break; - }; - - if (index == 0) - index = 14; // D31:F0 bit is an exception - - } else if (PCI_SLOT(dev->path.pci.devfn) == 29) { - index = 8 + PCI_FUNC(dev->path.pci.devfn); - - if ((PCI_FUNC(dev->path.pci.devfn) < 3) - || (PCI_FUNC(dev->path.pci.devfn) == 7)) - bHasDisableBit = 1; - } - - if (bHasDisableBit) { - cur_disable_mask = pci_read_config16(lpc_dev, FUNC_DIS); - new_disable_mask = cur_disable_mask & ~(1 << index); // enable it - if (!dev->enabled) { - new_disable_mask |= (1 << index); // disable it - } - if (new_disable_mask != cur_disable_mask) { - pci_write_config16(lpc_dev, FUNC_DIS, new_disable_mask); - } - } -} - -struct chip_operations southbridge_intel_i82801dx_ops = { - CHIP_NAME("Intel ICH4/ICH4-M (82801Dx) Series Southbridge") - .enable_dev = i82801dx_enable, -}; diff --git a/src/southbridge/intel/i82801dx/i82801dx.h b/src/southbridge/intel/i82801dx/i82801dx.h deleted file mode 100644 index 9864720..0000000 --- a/src/southbridge/intel/i82801dx/i82801dx.h +++ /dev/null @@ -1,172 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* the problem: we have 82801dbm support in fb1, and 82801er in fb2. - * fb1 code is what we want, fb2 structure is needed however. - * so we need to get fb1 code for 82801dbm into fb2 structure. - */ -/* What I did: took the 80801er stuff from fb2, verify it against the - * db stuff in fb1, and made sure it was right. - */ - -#ifndef I82801DX_H -#define I82801DX_H - -#include <acpi/acpi.h> - -#if !defined(__ASSEMBLER__) - -#include <device/device.h> - -void i82801dx_enable(struct device *dev); -void i82801dx_early_init(void); -void aseg_smm_lock(void); - -#endif - -#define DEBUG_PERIODIC_SMIS 0 - -#define MAINBOARD_POWER_OFF 0 -#define MAINBOARD_POWER_ON 1 -#define MAINBOARD_POWER_KEEP 2 - -/* - * 000 = Non-combined. P0 is primary master. P1 is secondary master. - * 001 = Non-combined. P0 is secondary master. P1 is primary master. - * 100 = Combined. P0 is primary master. P1 is primary slave. IDE is secondary; - * Primary IDE channel disabled. - * 101 = Combined. P0 is primary slave. P1 is primary master. IDE is secondary. - * 110 = Combined. IDE is primary. P0 is secondary master. P1 is secondary - * slave; Secondary IDE channel disabled. - * 111 = Combined. IDE is primary. P0 is secondary slave. P1 is secondary master. - */ -/* PCI Configuration Space (D31:F1) */ -#define IDE_TIM_PRI 0x40 /* IDE timings, primary */ -#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ - -/* IDE_TIM bits */ -#define IDE_DECODE_ENABLE (1 << 15) - -#define PCI_DMA_CFG 0x90 -#define SERIRQ_CNTL 0x64 -#define GEN_CNTL 0xd0 -#define GEN_STS 0xd4 -#define RTC_CONF 0xd8 -#define GEN_PMCON_3 0xa4 - -#define PCICMD 0x04 -#define PMBASE 0x40 -#define PMBASE_ADDR 0x0400 -#define DEFAULT_PMBASE PMBASE_ADDR -#define ACPI_CNTL 0x44 -#define ACPI_EN (1 << 4) -#define BIOS_CNTL 0x4E -#define GPIO_BASE 0x58 -#define GPIO_CNTL 0x5C -#define GPIOBASE_ADDR 0x0500 -#define PIRQA_ROUT 0x60 -#define PIRQB_ROUT 0x61 -#define PIRQC_ROUT 0x62 -#define PIRQD_ROUT 0x63 -#define PIRQE_ROUT 0x68 -#define PIRQF_ROUT 0x69 -#define PIRQG_ROUT 0x6A -#define PIRQH_ROUT 0x6B -#define COM_DEC 0xE0 -#define LPC_EN 0xE6 -#define FUNC_DIS 0xF2 - -/* 1e f0 244e */ - -#define CMD 0x04 -#define SBUS_NUM 0x19 -#define SUB_BUS_NUM 0x1A -#define SMLT 0x1B -#define IOBASE 0x1C -#define IOLIM 0x1D -#define MEMBASE 0x20 -#define MEMLIM 0x22 -#define CNF 0x50 -#define MTT 0x70 -#define PCI_MAST_STS 0x82 - -#define RTC_FAILED (1 <<2) - -#define PM1_STS 0x00 -#define WAK_STS (1 << 15) -#define PCIEXPWAK_STS (1 << 14) -#define PRBTNOR_STS (1 << 11) -#define RTC_STS (1 << 10) -#define PWRBTN_STS (1 << 8) -#define GBL_STS (1 << 5) -#define BM_STS (1 << 4) -#define TMROF_STS (1 << 0) -#define PM1_EN 0x02 -#define PCIEXPWAK_DIS (1 << 14) -#define RTC_EN (1 << 10) -#define PWRBTN_EN (1 << 8) -#define GBL_EN (1 << 5) -#define TMROF_EN (1 << 0) -#define PM1_CNT 0x04 -#define GBL_RLS (1 << 2) -#define BM_RLD (1 << 1) -#define SCI_EN (1 << 0) -#define PM1_TMR 0x08 -#define PROC_CNT 0x10 -#define LV2 0x14 -#define LV3 0x15 -#define LV4 0x16 -#define PM2_CNT 0x20 // mobile only -#define GPE0_STS 0x28 -#define PME_B0_STS (1 << 13) -#define USB3_STS (1 << 12) -#define PME_STS (1 << 11) -#define BATLOW_STS (1 << 10) -#define GST_STS (1 << 9) -#define RI_STS (1 << 8) -#define SMB_WAK_STS (1 << 7) -#define TCOSCI_STS (1 << 6) -#define AC97_STS (1 << 5) -#define USB2_STS (1 << 4) -#define USB1_STS (1 << 3) -#define SWGPE_STS (1 << 2) -#define HOT_PLUG_STS (1 << 1) -#define THRM_STS (1 << 0) -#define GPE0_EN 0x2c -#define PME_B0_EN (1 << 13) -#define PME_EN (1 << 11) -#define SMI_EN 0x30 -#define EL_SMI_EN (1 << 25) // Intel Quick Resume Technology -#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic -#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic -#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS -#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) -#define MCSMI_EN (1 << 11) // Trap microcontroller range access -#define BIOS_RLS (1 << 7) // asserts SCI on bit set -#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set -#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# -#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# -#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic -#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit -#define EOS (1 << 1) // End of SMI (deassert SMI#) -#define GBL_SMI_EN (1 << 0) // SMI# generation at all? -#define SMI_STS 0x34 -#define ALT_GP_SMI_EN 0x38 -#define ALT_GP_SMI_STS 0x3a -#define GPE_CNTL 0x42 -#define DEVACT_STS 0x44 -#define SS_CNT 0x50 -#define C3_RES 0x54 - -#define TCOBASE 0x60 /* TCO Base Address Register */ -#define TCO1_CNT 0x08 /* TCO1 Control Register */ - -#define GEN_PMCON_1 0xa0 -#define GEN_PMCON_2 0xa2 -#define GEN_PMCON_3 0xa4 - -/* GEN_PMCON_3 bits */ -#define RTC_BATTERY_DEAD (1 << 2) -#define RTC_POWER_FAILED (1 << 1) -#define SLEEP_AFTER_POWER_FAIL (1 << 0) - -#endif /* I82801DX_H */ diff --git a/src/southbridge/intel/i82801dx/ide.c b/src/southbridge/intel/i82801dx/ide.c deleted file mode 100644 index a54e497..0000000 --- a/src/southbridge/intel/i82801dx/ide.c +++ /dev/null @@ -1,64 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include "chip.h" -#include "i82801dx.h" - -typedef struct southbridge_intel_i82801dx_config config_t; - -static void ide_init(struct device *dev) -{ - /* Get the chip configuration */ - config_t *config = dev->chip_info; - - /* Enable IDE devices so the Linux IDE driver will work. */ - uint16_t ideTimingConfig; - - ideTimingConfig = pci_read_config16(dev, IDE_TIM_PRI); - ideTimingConfig &= ~IDE_DECODE_ENABLE; - if (!config || config->ide0_enable) { - /* Enable primary IDE interface. */ - ideTimingConfig |= IDE_DECODE_ENABLE; - printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n"); - } else { - printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n"); - } - pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); - - ideTimingConfig = pci_read_config16(dev, IDE_TIM_SEC); - ideTimingConfig &= ~IDE_DECODE_ENABLE; - if (!config || config->ide1_enable) { - /* Enable secondary IDE interface. */ - ideTimingConfig |= IDE_DECODE_ENABLE; - printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n"); - } else { - printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n"); - } - pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); -} - -static struct device_operations ide_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = ide_init, - .enable = i82801dx_enable, -}; - -/* 82801DB */ -static const struct pci_driver i82801db_ide __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VID_INTEL, - .device = 0x24cb, -}; - -/* 82801DBM */ -static const struct pci_driver i82801dbm_ide __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VID_INTEL, - .device = 0x24ca, -}; diff --git a/src/southbridge/intel/i82801dx/lpc.c b/src/southbridge/intel/i82801dx/lpc.c deleted file mode 100644 index 46c731a..0000000 --- a/src/southbridge/intel/i82801dx/lpc.c +++ /dev/null @@ -1,334 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <arch/hpet.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <option.h> -#include <pc80/mc146818rtc.h> -#include <pc80/isa-dma.h> -#include <pc80/i8259.h> -#include "chip.h" -#include "i82801dx.h" - -#define NMI_OFF 0 - -typedef struct southbridge_intel_i82801dx_config config_t; - -/** - * Enable ACPI I/O range. - * - * @param dev PCI device with ACPI and PM BAR's - */ -static void i82801dx_enable_acpi(struct device *dev) -{ - /* Set ACPI base address (I/O space). */ - pci_write_config32(dev, PMBASE, (PMBASE_ADDR | 1)); - - /* Enable ACPI I/O range decode and ACPI power management. */ - pci_write_config8(dev, ACPI_CNTL, ACPI_EN); -} - -/** - * Set miscellaneous static southbridge features. - * - * @param dev PCI device with I/O APIC control registers - */ -static void i82801dx_enable_ioapic(struct device *dev) -{ - u32 reg32; - - reg32 = pci_read_config32(dev, GEN_CNTL); - reg32 |= (1 << 13); /* Coprocessor error enable (COPR_ERR_EN) */ - reg32 |= (3 << 7); /* IOAPIC enable (APIC_EN) */ - reg32 |= (1 << 2); /* DMA collection buffer enable (DCB_EN) */ - reg32 |= (1 << 1); /* Delayed transaction enable (DTE) */ - pci_write_config32(dev, GEN_CNTL, reg32); - printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); - - setup_ioapic(VIO_APIC_VADDR, 0x02); - - ioapic_set_boot_config(VIO_APIC_VADDR, true); -} - -static void i82801dx_enable_serial_irqs(struct device *dev) -{ - /* Set packet length and toggle silent mode bit. */ - pci_write_config8(dev, SERIRQ_CNTL, - (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); - pci_write_config8(dev, SERIRQ_CNTL, - (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0)); -} - -static void i82801dx_pirq_init(struct device *dev) -{ - /* Get the chip configuration */ - config_t *config = dev->chip_info; - - pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); - pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); - pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); - pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); - pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); - pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); - pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); - pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); -} - -static void i82801dx_power_options(struct device *dev) -{ - u8 reg8; - u16 reg16, pmbase; - u32 reg32; - const char *state; - - /* Which state do we want to goto after g3 (power restored)? - * 0 == S0 Full On - * 1 == S5 Soft Off - * - * If the option is not existent (Laptops), use MAINBOARD_POWER_ON. - */ - const unsigned int pwr_on = get_uint_option("power_on_after_fail", MAINBOARD_POWER_ON); - - reg8 = pci_read_config8(dev, GEN_PMCON_3); - reg8 &= 0xfe; - switch (pwr_on) { - case MAINBOARD_POWER_OFF: - reg8 |= 1; - state = "off"; - break; - case MAINBOARD_POWER_ON: - reg8 &= ~1; - state = "on"; - break; - case MAINBOARD_POWER_KEEP: - reg8 &= ~1; - state = "state keep"; - break; - default: - state = "undefined"; - } - - reg8 &= ~(1 << 3); /* minimum assertion is 1 to 2 RTCCLK */ - - pci_write_config8(dev, GEN_PMCON_3, reg8); - printk(BIOS_INFO, "Set power %s after power failure.\n", state); - - /* Set up NMI on errors. */ - reg8 = inb(0x61); - reg8 &= 0x0f; /* Higher Nibble must be 0 */ - reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ - // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ - reg8 |= (1 << 2); /* PCI SERR# Disable for now */ - outb(reg8, 0x61); - - reg8 = inb(0x70); - const unsigned int nmi_option = get_uint_option("nmi", NMI_OFF); - if (nmi_option) { - printk(BIOS_INFO, "NMI sources enabled.\n"); - reg8 &= ~(1 << 7); /* Set NMI. */ - } else { - printk(BIOS_INFO, "NMI sources disabled.\n"); - reg8 |= (1 << 7); /* Disable NMI. */ - } - outb(reg8, 0x70); - - /* Set SMI# rate down and enable CPU_SLP# */ - reg16 = pci_read_config16(dev, GEN_PMCON_1); - reg16 &= ~(3 << 0); // SMI# rate 1 minute - reg16 |= (1 << 5); // CPUSLP_EN Desktop only - pci_write_config16(dev, GEN_PMCON_1, reg16); - - pmbase = pci_read_config16(dev, 0x40) & 0xfffe; - - /* Set up power management block and determine sleep mode */ - reg32 = inl(pmbase + 0x04); // PM1_CNT - - reg32 &= ~(7 << 10); // SLP_TYP - reg32 |= (1 << 0); // SCI_EN - outl(reg32, pmbase + 0x04); -} - -static void gpio_init(struct device *dev) -{ - /* This should be done in romstage.c already */ - pci_write_config32(dev, GPIO_BASE, (GPIOBASE_ADDR | 1)); - pci_write_config8(dev, GPIO_CNTL, 0x10); -} - -static void i82801dx_rtc_init(struct device *dev) -{ - u8 reg8; - u32 reg32; - int rtc_failed; - - reg8 = pci_read_config8(dev, GEN_PMCON_3); - rtc_failed = reg8 & RTC_BATTERY_DEAD; - if (rtc_failed) { - reg8 &= ~(1 << 1); /* Preserve the power fail state. */ - pci_write_config8(dev, GEN_PMCON_3, reg8); - } - reg32 = pci_read_config32(dev, GEN_STS); - rtc_failed |= reg32 & (1 << 2); - cmos_init(rtc_failed); - - /* Enable access to the upper 128 byte bank of CMOS RAM. */ - pci_write_config8(dev, RTC_CONF, 0x04); -} - -static void i82801dx_lpc_route_dma(struct device *dev, u8 mask) -{ - u16 reg16; - int i; - - reg16 = pci_read_config16(dev, PCI_DMA_CFG); - reg16 &= 0x300; - for (i = 0; i < 8; i++) { - if (i == 4) - continue; - reg16 |= ((mask & (1 << i)) ? 3 : 1) << (i * 2); - } - pci_write_config16(dev, PCI_DMA_CFG, reg16); -} - -static void i82801dx_lpc_decode_en(struct device *dev) -{ - /* Decode 0x3F8-0x3FF (COM1) for COMA port, 0x2F8-0x2FF (COM2) for COMB. - * LPT decode defaults to 0x378-0x37F and 0x778-0x77F. - * Floppy decode defaults to 0x3F0-0x3F5, 0x3F7. - * We also need to set the value for LPC I/F Enables Register. - */ - pci_write_config8(dev, COM_DEC, 0x10); - pci_write_config16(dev, LPC_EN, 0x300F); -} - -/* ICH4 does not mention HPET in the docs, but - * all ICH3 and ICH4 do have HPETs built in. - */ -static void enable_hpet(struct device *dev) -{ - u32 reg32, hpet, val; - - /* Set HPET base address and enable it */ - printk(BIOS_DEBUG, "Enabling HPET at 0x%x\n", HPET_BASE_ADDRESS); - reg32 = pci_read_config32(dev, GEN_CNTL); - /* - * Bit 17 is HPET enable bit. - * Bit 16:15 control the HPET base address. - */ - reg32 &= ~(3 << 15); /* Clear it */ - - hpet = HPET_BASE_ADDRESS >> 12; - hpet &= 0x3; - - reg32 |= (hpet << 15); - reg32 |= (1 << 17); /* Enable HPET. */ - pci_write_config32(dev, GEN_CNTL, reg32); - - /* Check to see whether it took */ - reg32 = pci_read_config32(dev, GEN_CNTL); - val = reg32 >> 15; - val &= 0x7; - - if ((val & 0x4) && (hpet == (val & 0x3))) { - printk(BIOS_INFO, "HPET enabled at 0x%x\n", HPET_BASE_ADDRESS); - } else { - printk(BIOS_WARNING, "HPET was not enabled correctly\n"); - reg32 &= ~(1 << 17); /* Clear Enable */ - pci_write_config32(dev, GEN_CNTL, reg32); - } -} - -static void lpc_init(struct device *dev) -{ - i82801dx_enable_acpi(dev); - /* IO APIC initialization. */ - i82801dx_enable_ioapic(dev); - - i82801dx_enable_serial_irqs(dev); - - /* Setup the PIRQ. */ - i82801dx_pirq_init(dev); - - /* Setup power options. */ - i82801dx_power_options(dev); - - /* Set the state of the GPIO lines. */ - gpio_init(dev); - - /* Initialize the real time clock. */ - i82801dx_rtc_init(dev); - - /* Route DMA. */ - i82801dx_lpc_route_dma(dev, 0xff); - - /* Initialize ISA DMA. */ - isa_dma_init(); - - /* Setup decode ports and LPC I/F enables. */ - i82801dx_lpc_decode_en(dev); - - /* Initialize the High Precision Event Timers */ - enable_hpet(dev); - - setup_i8259(); - - /* Don't allow evil boot loaders, kernels, or - * userspace applications to deceive us: - */ - if (CONFIG(SMM_LEGACY_ASEG)) - aseg_smm_lock(); -} - -static void i82801dx_lpc_read_resources(struct device *dev) -{ - struct resource *res; - - /* Get the normal PCI resources of this device. */ - pci_dev_read_resources(dev); - - /* Add an extra subtractive resource for both memory and I/O. */ - res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); - res->base = 0; - res->size = 0x1000; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); - res->base = 0xff800000; - res->size = 0x00800000; /* 8 MB for flash */ - res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = IO_APIC_ADDR; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; -} - -static struct device_operations lpc_ops = { - .read_resources = i82801dx_lpc_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = lpc_init, - .scan_bus = scan_static_bus, - .enable = i82801dx_enable, -}; - -/* 82801DB/DBL */ -static const struct pci_driver lpc_driver_db __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82801DB_LPC, -}; - -/* 82801DBM */ -static const struct pci_driver lpc_driver_dbm __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82801DBM_LPC, -}; diff --git a/src/southbridge/intel/i82801dx/pci.c b/src/southbridge/intel/i82801dx/pci.c deleted file mode 100644 index 7743705..0000000 --- a/src/southbridge/intel/i82801dx/pci.c +++ /dev/null @@ -1,35 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include "i82801dx.h" - -static void pci_init(struct device *dev) -{ - /* System error enable */ - pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_SERR | PCI_COMMAND_PARITY); -} - -static struct device_operations pci_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = pci_init, - .scan_bus = pci_scan_bridge, -}; - -/* 82801DB */ -static const struct pci_driver pci_driver_db __pci_driver = { - .ops = &pci_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82801DB_PCI, -}; - -/* 82801DBM/DBL */ -static const struct pci_driver pci_driver_dbm __pci_driver = { - .ops = &pci_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82801DBM_PCI, -}; diff --git a/src/southbridge/intel/i82801dx/smi.c b/src/southbridge/intel/i82801dx/smi.c deleted file mode 100644 index dd993ce..0000000 --- a/src/southbridge/intel/i82801dx/smi.c +++ /dev/null @@ -1,323 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <device/device.h> -#include <device/pci.h> -#include <console/console.h> -#include <acpi/acpi.h> -#include <arch/io.h> -#include <device/pci_ops.h> -#include <cpu/x86/cache.h> -#include <cpu/x86/smm.h> -#include <cpu/x86/smi_deprecated.h> -#include <string.h> -#include "i82801dx.h" - -void northbridge_write_smram(u8 smram); - -/* For intel/e7505. */ -#define D_OPEN (1 << 6) -#define D_CLS (1 << 5) -#define D_LCK (1 << 4) -#define G_SMRAME (1 << 3) -#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) - -/* While we read PMBASE dynamically in case it changed, let's - * initialize it with a sane value - */ -static u16 pmbase = PMBASE_ADDR; - -/** - * @brief read and clear PM1_STS - * @return PM1_STS register - */ -static u16 reset_pm1_status(void) -{ - u16 reg16; - - reg16 = inw(pmbase + PM1_STS); - /* set status bits are cleared by writing 1 to them */ - outw(reg16, pmbase + PM1_STS); - - return reg16; -} - -static void dump_pm1_status(u16 pm1_sts) -{ - printk(BIOS_DEBUG, "PM1_STS: "); - if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK "); - if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR "); - if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC "); - if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN "); - if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL "); - if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM "); - if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF "); - printk(BIOS_DEBUG, "\n"); -} - -/** - * @brief read and clear SMI_STS - * @return SMI_STS register - */ -static u32 reset_smi_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + SMI_STS); - - return reg32; -} - -static void dump_smi_status(u32 smi_sts) -{ - printk(BIOS_DEBUG, "SMI_STS: "); - if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); - if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); - if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); - if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); - if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); - if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); - if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); - if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); - if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); - if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); - if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); - if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); - if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); - if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); - printk(BIOS_DEBUG, "\n"); -} - -/** - * @brief read and clear GPE0_STS - * @return GPE0_STS register - */ -static u32 reset_gpe0_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + GPE0_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + GPE0_STS); - - return reg32; -} - -static void dump_gpe0_status(u32 gpe0_sts) -{ - int i; - printk(BIOS_DEBUG, "GPE0_STS: "); - for (i=31; i>= 16; i--) { - if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); - } - if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); - if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); - if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); - if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); - if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); - if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); - if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); - if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); - if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); - printk(BIOS_DEBUG, "\n"); -} - -/** - * @brief read and clear ALT_GP_SMI_STS - * @return ALT_GP_SMI_STS register - */ -static u16 reset_alt_gp_smi_status(void) -{ - u16 reg16; - - reg16 = inl(pmbase + ALT_GP_SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg16, pmbase + ALT_GP_SMI_STS); - - return reg16; -} - -static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts) -{ - int i; - printk(BIOS_DEBUG, "ALT_GP_SMI_STS: "); - for (i=15; i>= 0; i--) { - if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", i); - } - printk(BIOS_DEBUG, "\n"); -} - -/** - * @brief read and clear TCOx_STS - * @return TCOx_STS registers - */ -static u32 reset_tco_status(void) -{ - u32 tcobase = pmbase + 0x60; - u32 reg32; - - reg32 = inl(tcobase + 0x04); - /* set status bits are cleared by writing 1 to them */ - outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS - if (reg32 & (1 << 18)) - outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS - - return reg32; -} - -static void dump_tco_status(u32 tco_sts) -{ - printk(BIOS_DEBUG, "TCO_STS: "); - if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); - if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); - if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); - if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); - if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); - if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); - if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); - if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); - if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); - if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); - if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); - if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); - printk(BIOS_DEBUG, "\n"); -} - -/** - * @brief Set the EOS bit - */ -static void smi_set_eos(void) -{ - u8 reg8; - - reg8 = inb(pmbase + SMI_EN); - reg8 |= EOS; - outb(reg8, pmbase + SMI_EN); -} - -extern uint8_t smm_relocation_start, smm_relocation_end; -static void *default_smm_area = NULL; - -static void aseg_smm_relocate(void) -{ - u32 smi_en; - u16 pm1_en; - - printk(BIOS_DEBUG, "Initializing SMM handler..."); - - pmbase = pci_read_config16(pcidev_on_root(0x1f, 0), 0x40) & 0xfffc; - printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); - - smi_en = inl(pmbase + SMI_EN); - if (smi_en & APMC_EN) { - printk(BIOS_INFO, "SMI# handler already enabled?\n"); - return; - } - - default_smm_area = backup_default_smm_area(); - - /* copy the SMM relocation code */ - memcpy((void *)0x38000, &smm_relocation_start, - &smm_relocation_end - &smm_relocation_start); - wbinvd(); - - printk(BIOS_DEBUG, "\n"); - dump_smi_status(reset_smi_status()); - dump_pm1_status(reset_pm1_status()); - dump_gpe0_status(reset_gpe0_status()); - dump_alt_gp_smi_status(reset_alt_gp_smi_status()); - dump_tco_status(reset_tco_status()); - - /* Enable SMI generation: - * - on TCO events - * - on APMC writes (io 0xb2) - * - on writes to SLP_EN (sleep states) - * - on writes to GBL_RLS (bios commands) - * No SMIs: - * - on microcontroller writes (io 0x62/0x66) - */ - - smi_en = 0; /* reset SMI enables */ - smi_en |= TCO_EN; - smi_en |= APMC_EN; - if (CONFIG(DEBUG_PERIODIC_SMI)) - smi_en |= PERIODIC_EN; - smi_en |= SLP_SMI_EN; - smi_en |= BIOS_EN; - - /* The following need to be on for SMIs to happen */ - smi_en |= EOS | GBL_SMI_EN; - - outl(smi_en, pmbase + SMI_EN); - - pm1_en = 0; - pm1_en |= PWRBTN_EN; - pm1_en |= GBL_EN; - outw(pm1_en, pmbase + PM1_EN); - - /** - * There are several methods of raising a controlled SMI# via - * software, among them: - * - Writes to io 0xb2 (APMC) - * - Writes to the Local Apic ICR with Delivery mode SMI. - * - * Using the local APIC is a bit more tricky. According to - * AMD Family 11 Processor BKDG no destination shorthand must be - * used. - * The whole SMM initialization is quite a bit hardware specific, so - * I'm not too worried about the better of the methods at the moment - */ - - /* raise an SMI interrupt */ - printk(BIOS_SPEW, " ... raise SMI#\n"); - apm_control(APM_CNT_NOOP_SMI); -} - -static void aseg_smm_install(void) -{ - /* copy the real SMM handler */ - memcpy((void *)0xa0000, _binary_smm_start, - _binary_smm_end - _binary_smm_start); - wbinvd(); -} - -void smm_init(void) -{ - /* Put SMM code to 0xa0000 */ - aseg_smm_install(); - - /* Put relocation code to 0x38000 and relocate SMBASE */ - aseg_smm_relocate(); - - /* We're done. Make sure SMIs can happen! */ - smi_set_eos(); -} - -void smm_init_completion(void) -{ - restore_default_smm_area(default_smm_area); -} - -void aseg_smm_lock(void) -{ - /* LOCK the SMM memory window and enable normal SMM. - * After running this function, only a full reset can - * make the SMM registers writable again. - */ - printk(BIOS_DEBUG, "Locking SMM.\n"); - northbridge_write_smram(D_LCK | G_SMRAME | C_BASE_SEG); -} diff --git a/src/southbridge/intel/i82801dx/smihandler.c b/src/southbridge/intel/i82801dx/smihandler.c deleted file mode 100644 index 575d1ba..0000000 --- a/src/southbridge/intel/i82801dx/smihandler.c +++ /dev/null @@ -1,491 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <types.h> -#include <arch/io.h> -#include <device/pci_ops.h> -#include <console/console.h> -#include <cpu/x86/cache.h> -#include <cpu/x86/smm.h> -#include <device/pci_def.h> -#include "i82801dx.h" - -#define DEBUG_SMI - -/* I830M */ -#define SMRAM 0x90 -#define D_OPEN (1 << 6) -#define D_CLS (1 << 5) -#define D_LCK (1 << 4) -#define G_SMRANE (1 << 3) -#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) - -/* While we read PMBASE dynamically in case it changed, let's - * initialize it with a sane value - */ -u16 pmbase = PMBASE_ADDR; - -/** - * @brief read and clear PM1_STS - * @return PM1_STS register - */ -static u16 reset_pm1_status(void) -{ - u16 reg16; - - reg16 = inw(pmbase + PM1_STS); - /* set status bits are cleared by writing 1 to them */ - outw(reg16, pmbase + PM1_STS); - - return reg16; -} - -static void dump_pm1_status(u16 pm1_sts) -{ - printk(BIOS_SPEW, "PM1_STS: "); - if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK "); - if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR "); - if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC "); - if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN "); - if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL "); - if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM "); - if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF "); - printk(BIOS_SPEW, "\n"); - int reg16 = inw(pmbase + PM1_EN); - printk(BIOS_SPEW, "PM1_EN: %x\n", reg16); -} - -/** - * @brief read and clear SMI_STS - * @return SMI_STS register - */ -static u32 reset_smi_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + SMI_STS); - - return reg32; -} - -static void dump_smi_status(u32 smi_sts) -{ - printk(BIOS_DEBUG, "SMI_STS: "); - if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); - if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); - if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); - if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); - if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); - if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); - if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); - if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); - if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); - if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); - if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); - if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); - if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); - if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); - printk(BIOS_DEBUG, "\n"); -} - -/** - * @brief read and clear GPE0_STS - * @return GPE0_STS register - */ -static u32 reset_gpe0_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + GPE0_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + GPE0_STS); - - return reg32; -} - -static void dump_gpe0_status(u32 gpe0_sts) -{ - int i; - printk(BIOS_DEBUG, "GPE0_STS: "); - for (i=31; i>= 16; i--) { - if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); - } - if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); - if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); - if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); - if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); - if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); - if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); - if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); - if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); - if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); - printk(BIOS_DEBUG, "\n"); -} - -/** - * @brief read and clear TCOx_STS - * @return TCOx_STS registers - */ -static u32 reset_tco_status(void) -{ - u32 tcobase = pmbase + 0x60; - u32 reg32; - - reg32 = inl(tcobase + 0x04); - /* set status bits are cleared by writing 1 to them */ - outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS - if (reg32 & (1 << 18)) - outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS - - return reg32; -} - -static void dump_tco_status(u32 tco_sts) -{ - printk(BIOS_DEBUG, "TCO_STS: "); - if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); - if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); - if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); - if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); - if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); - if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); - if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); - if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); - if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); - if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); - if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); - if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); - printk(BIOS_DEBUG, "\n"); -} - -/** - * @brief Set the EOS bit - */ -void southbridge_smi_set_eos(void) -{ - u8 reg8; - - reg8 = inb(pmbase + SMI_EN); - reg8 |= EOS; - outb(reg8, pmbase + SMI_EN); -} - -static void busmaster_disable_on_bus(int bus) -{ - int slot, func; - unsigned int val; - unsigned char hdr; - - for (slot = 0; slot < 0x20; slot++) { - for (func = 0; func < 8; func++) { - u16 reg16; - pci_devfn_t dev = PCI_DEV(bus, slot, func); - - val = pci_read_config32(dev, PCI_VENDOR_ID); - - if (val == 0xffffffff || val == 0x00000000 || - val == 0x0000ffff || val == 0xffff0000) - continue; - - /* Disable Bus Mastering for this one device */ - reg16 = pci_read_config16(dev, PCI_COMMAND); - reg16 &= ~PCI_COMMAND_MASTER; - pci_write_config16(dev, PCI_COMMAND, reg16); - - /* If this is a bridge, then follow it. */ - hdr = pci_read_config8(dev, PCI_HEADER_TYPE); - hdr &= 0x7f; - if (hdr == PCI_HEADER_TYPE_BRIDGE || - hdr == PCI_HEADER_TYPE_CARDBUS) { - unsigned int buses; - buses = pci_read_config32(dev, PCI_PRIMARY_BUS); - busmaster_disable_on_bus((buses >> 8) & 0xff); - } - } - } -} - -static void southbridge_smi_sleep(void) -{ - u8 reg8; - u32 reg32; - u8 slp_typ; - /* FIXME: the power state on boot should be read from - * CMOS or even better from GNVS. Right now it's hard - * coded at compile time. - */ - u8 s5pwr = CONFIG_MAINBOARD_POWER_FAILURE_STATE; - - /* First, disable further SMIs */ - reg8 = inb(pmbase + SMI_EN); - reg8 &= ~SLP_SMI_EN; - outb(reg8, pmbase + SMI_EN); - - /* Figure out SLP_TYP */ - reg32 = inl(pmbase + PM1_CNT); - printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32); - slp_typ = acpi_sleep_from_pm1(reg32); - - /* Next, do the deed. - */ - - switch (slp_typ) { - case ACPI_S0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break; - case ACPI_S1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break; - case ACPI_S3: - printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n"); - /* Invalidate the cache before going to S3 */ - wbinvd(); - break; - case ACPI_S4: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break; - case ACPI_S5: - printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); - - outl(0, pmbase + GPE0_EN); - - /* Should we keep the power state after a power loss? - * In case the setting is "ON" or "OFF" we don't have - * to do anything. But if it's "KEEP" we have to switch - * to "OFF" before entering S5. - */ - if (s5pwr == MAINBOARD_POWER_KEEP) { - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 |= 1; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - } - - /* also iterates over all bridges on bus 0 */ - busmaster_disable_on_bus(0); - break; - default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break; - } - - /* Write back to the SLP register to cause the originally intended - * event again. We need to set BIT13 (SLP_EN) though to make the - * sleep happen. - */ - outl(reg32 | SLP_EN, pmbase + PM1_CNT); - - /* In most sleep states, the code flow of this function ends at - * the line above. However, if we entered sleep state S1 and wake - * up again, we will continue to execute code in this function. - */ - reg32 = inl(pmbase + PM1_CNT); - if (reg32 & SCI_EN) { - /* The OS is not an ACPI OS, so we set the state to S0 */ - reg32 &= ~(SLP_EN | SLP_TYP); - outl(reg32, pmbase + PM1_CNT); - } -} - -static void southbridge_smi_apmc(void) -{ - u32 pmctrl; - u8 reg8; - - reg8 = apm_get_apmc(); - switch (reg8) { - case APM_CNT_ACPI_DISABLE: - pmctrl = inl(pmbase + PM1_CNT); - pmctrl &= ~SCI_EN; - outl(pmctrl, pmbase + PM1_CNT); - break; - case APM_CNT_ACPI_ENABLE: - pmctrl = inl(pmbase + PM1_CNT); - pmctrl |= SCI_EN; - outl(pmctrl, pmbase + PM1_CNT); - break; - } -} - -static void southbridge_smi_pm1(void) -{ - u16 pm1_sts; - - pm1_sts = reset_pm1_status(); - dump_pm1_status(pm1_sts); - - /* While OSPM is not active, poweroff immediately - * on a power button event. - */ - if (pm1_sts & PWRBTN_STS) { - // power button pressed - u32 reg32; - reg32 = (7 << 10) | (1 << 13); - outl(reg32, pmbase + PM1_CNT); - } -} - -static void southbridge_smi_gpe0(void) -{ - u32 gpe0_sts; - - gpe0_sts = reset_gpe0_status(); - dump_gpe0_status(gpe0_sts); -} - -static void southbridge_smi_gpi(void) -{ - u16 reg16; - reg16 = inw(pmbase + ALT_GP_SMI_STS); - outl(reg16, pmbase + ALT_GP_SMI_STS); - - reg16 &= inw(pmbase + ALT_GP_SMI_EN); - - mainboard_smi_gpi(reg16); - - if (reg16) - printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16); -} - -static void southbridge_smi_mc(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_EN); - - /* Are periodic SMIs enabled? */ - if ((reg32 & MCSMI_EN) == 0) - return; - - printk(BIOS_DEBUG, "Microcontroller SMI.\n"); -} - -static void southbridge_smi_tco(void) -{ - u32 tco_sts; - - tco_sts = reset_tco_status(); - - /* Any TCO event? */ - if (!tco_sts) - return; - - if (tco_sts & (1 << 8)) { // BIOSWR - u8 bios_cntl; - - bios_cntl = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc); - - if (bios_cntl & 1) { - /* BWE is RW, so the SMI was caused by a - * write to BWE, not by a write to the BIOS - */ - - /* This is the place where we notice someone - * is trying to tinker with the BIOS. We are - * trying to be nice and just ignore it. A more - * resolute answer would be to power down the - * box. - */ - printk(BIOS_DEBUG, "Switching back to RO\n"); - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1)); - } /* No else for now? */ - } else if (tco_sts & (1 << 3)) { /* TIMEOUT */ - /* Handle TCO timeout */ - printk(BIOS_DEBUG, "TCO Timeout.\n"); - } else { - dump_tco_status(tco_sts); - } -} - -static void southbridge_smi_periodic(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_EN); - - /* Are periodic SMIs enabled? */ - if ((reg32 & PERIODIC_EN) == 0) - return; - - printk(BIOS_DEBUG, "Periodic SMI.\n"); -} - -typedef void (*smi_handler_t)(void); - -smi_handler_t southbridge_smi[32] = { - NULL, // [0] reserved - NULL, // [1] reserved - NULL, // [2] BIOS_STS - NULL, // [3] LEGACY_USB_STS - southbridge_smi_sleep, // [4] SLP_SMI_STS - southbridge_smi_apmc, // [5] APM_STS - NULL, // [6] SWSMI_TMR_STS - NULL, // [7] reserved - southbridge_smi_pm1, // [8] PM1_STS - southbridge_smi_gpe0, // [9] GPE0_STS - southbridge_smi_gpi, // [10] GPI_STS - southbridge_smi_mc, // [11] MCSMI_STS - NULL, // [12] DEVMON_STS - southbridge_smi_tco, // [13] TCO_STS - southbridge_smi_periodic, // [14] PERIODIC_STS - NULL, // [15] SERIRQ_SMI_STS - NULL, // [16] SMBUS_SMI_STS - NULL, // [17] LEGACY_USB2_STS - NULL, // [18] INTEL_USB2_STS - NULL, // [19] reserved - NULL, // [20] PCI_EXP_SMI_STS - NULL, // [21] MONITOR_STS - NULL, // [22] reserved - NULL, // [23] reserved - NULL, // [24] reserved - NULL, // [25] EL_SMI_STS - NULL, // [26] SPI_STS - NULL, // [27] reserved - NULL, // [28] reserved - NULL, // [29] reserved - NULL, // [30] reserved - NULL // [31] reserved -}; - -/** - * @brief Interrupt handler for SMI# - */ -void southbridge_smi_handler(void) -{ - int i, dump = 0; - u32 smi_sts; - - /* Update global variable pmbase */ - pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - - /* We need to clear the SMI status registers, or we won't see what's - * happening in the following calls. - */ - smi_sts = reset_smi_status(); - - /* Filter all non-enabled SMI events */ - // FIXME Double check, this clears MONITOR - // smi_sts &= inl(pmbase + SMI_EN); - - /* Call SMI sub handler for each of the status bits */ - for (i = 0; i < 31; i++) { - if (smi_sts & (1 << i)) { - if (southbridge_smi[i]) { - southbridge_smi[i](); - } else { - printk(BIOS_DEBUG, "SMI_STS[%d] occurred, but no " - "handler available.\n", i); - dump = 1; - } - } - } - - if (dump) { - dump_smi_status(smi_sts); - } -} diff --git a/src/southbridge/intel/i82801dx/usb.c b/src/southbridge/intel/i82801dx/usb.c deleted file mode 100644 index 16ec307..0000000 --- a/src/southbridge/intel/i82801dx/usb.c +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include "i82801dx.h" - -static void usb_init(struct device *dev) -{ - printk(BIOS_DEBUG, "USB: Setting up controller.. "); - pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE); - printk(BIOS_DEBUG, "done.\n"); -} - -static struct device_operations usb_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = usb_init, - .enable = i82801dx_enable, -}; - -/* 82801DB/DBL/DBM USB1 */ -static const struct pci_driver usb_driver_1 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82801DB_USB1, -}; - -/* 82801DB/DBL/DBM USB2 */ -static const struct pci_driver usb_driver_2 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82801DB_USB2, -}; - -/* 82801DB/DBL/DBM USB3 */ -static const struct pci_driver usb_driver_3 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82801DB_USB3, -}; diff --git a/src/southbridge/intel/i82801dx/usb2.c b/src/southbridge/intel/i82801dx/usb2.c deleted file mode 100644 index 0fe7c93..0000000 --- a/src/southbridge/intel/i82801dx/usb2.c +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <device/pci_ehci.h> -#include "i82801dx.h" - -static void usb2_init(struct device *dev) -{ - printk(BIOS_DEBUG, "USB: Setting up controller.. "); - pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE); - printk(BIOS_DEBUG, "done.\n"); -} - -static struct device_operations usb2_ops = { - .read_resources = pci_ehci_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = usb2_init, - .enable = i82801dx_enable, -}; - -/* 82801DB/DBM USB 2.0 */ -static const struct pci_driver usb2_driver __pci_driver = { - .ops = &usb2_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82801DB_EHCI, -}; diff --git a/src/southbridge/intel/i82870/82870.h b/src/southbridge/intel/i82870/82870.h deleted file mode 100644 index c8adb0e..0000000 --- a/src/southbridge/intel/i82870/82870.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* for io APIC 1461 */ -#define MBAR 0x10 -#define ABAR 0x40 - -/* for pci bridge 1460 */ -#define MTT 0x042 -#define HCCR 0x0f0 -#define ACNF 0x0e0 -#define STRP 0x44 // Strap status register - -#define STRP_EN133 0x0001 // 133 MHz-capable (Px_133EN) -#define STRP_HPCAP 0x0002 // Hot-plug capable (Hx_SLOT zero/nonzero) - -#define ACNF_SYNCPH 0x0010 // PCI(-X) input clock is synchronous to hub input clock diff --git a/src/southbridge/intel/i82870/Kconfig b/src/southbridge/intel/i82870/Kconfig deleted file mode 100644 index b56113b..0000000 --- a/src/southbridge/intel/i82870/Kconfig +++ /dev/null @@ -1,2 +0,0 @@ -config SOUTHBRIDGE_INTEL_I82870 - bool diff --git a/src/southbridge/intel/i82870/Makefile.inc b/src/southbridge/intel/i82870/Makefile.inc deleted file mode 100644 index d6ae171..0000000 --- a/src/southbridge/intel/i82870/Makefile.inc +++ /dev/null @@ -1,6 +0,0 @@ -ifeq ($(CONFIG_SOUTHBRIDGE_INTEL_I82870),y) - -ramstage-y += ioapic.c -ramstage-y += pcibridge.c - -endif diff --git a/src/southbridge/intel/i82870/ioapic.c b/src/southbridge/intel/i82870/ioapic.c deleted file mode 100644 index 65fecd1..0000000 --- a/src/southbridge/intel/i82870/ioapic.c +++ /dev/null @@ -1,79 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <assert.h> -#include "82870.h" - -static int num_p64h2_ioapics = 0; - -static void p64h2_ioapic_enable(struct device *dev) -{ - /* We have to enable MEM and Bus Master for IOAPIC */ - uint16_t command = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - - pci_write_config16(dev, PCI_COMMAND, command); -} - -/** - * Configure one of the IOAPICs in a P64H2. - * - * Note that a PCI bus scan will detect both IOAPICs, so this function - * will be called twice for each P64H2 in the system. - * - * @param dev PCI bus/device/function of P64H2 IOAPIC. - * NOTE: There are two IOAPICs per P64H2, at D28:F0 and D30:F0. - */ -static void p64h2_ioapic_init(struct device *dev) -{ - uint32_t memoryBase; - int apic_index, apic_id; - - apic_index = num_p64h2_ioapics; - num_p64h2_ioapics++; - - // A note on IOAPIC addresses: - // 0 and 1 are used for the local APICs of the dual virtual - // (hyper-threaded) CPUs of physical CPU 0 (devicetree.cb). - // 6 and 7 are used for the local APICs of the dual virtual - // (hyper-threaded) CPUs of physical CPU 1 (devicetree.cb). - // 2 is used for the IOAPIC in the 82801 southbridge (hard-coded in i82801xx_lpc.c) - - // Map APIC index into APIC ID - // IDs 3, 4, 5, and 8+ are available (see above note) - - if (apic_index < 3) - apic_id = apic_index + 3; - else - apic_id = apic_index + 5; - - ASSERT(apic_id < 16); // ID is only 4 bits - - // Read the MBAR address for setting up the IOAPIC in memory space - // NOTE: this address was assigned during enumeration of the bus - - memoryBase = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - - set_ioapic_id((void *)memoryBase, apic_id); - - // Use Processor System Bus to deliver interrupts - ioapic_set_boot_config((void *)memoryBase, true); -} - -static struct device_operations ioapic_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = p64h2_ioapic_init, - .enable = p64h2_ioapic_enable, -}; - -static const struct pci_driver ioapic_driver __pci_driver = { - .ops = &ioapic_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82870_1E0, - -}; diff --git a/src/southbridge/intel/i82870/pcibridge.c b/src/southbridge/intel/i82870/pcibridge.c deleted file mode 100644 index 00bf6bb..0000000 --- a/src/southbridge/intel/i82870/pcibridge.c +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include "82870.h" - -static void p64h2_pcix_init(struct device *dev) -{ - u32 dword; - u8 byte; - - /* The purpose of changes to HCCR, ACNF, and MTT is to speed - * up the PCI bus for cards having high speed transfers. - */ - dword = 0xc2040002; - pci_write_config32(dev, HCCR, dword); - dword = 0x0000c3bf; - pci_write_config32(dev, ACNF, dword); - byte = 0x08; - pci_write_config8(dev, MTT, byte); - -} -static struct device_operations pcix_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = p64h2_pcix_init, - .scan_bus = pci_scan_bridge, - .reset_bus = pci_bus_reset, -}; - -static const struct pci_driver pcix_driver __pci_driver = { - .ops = &pcix_ops, - .vendor = PCI_VID_INTEL, - .device = PCI_DID_INTEL_82870_1F0, -}; - -struct chip_operations southbridge_intel_i82870_ops = { - CHIP_NAME("Intel 82870") -}; diff --git a/src/superio/smsc/Makefile.inc b/src/superio/smsc/Makefile.inc index 86cf9c5..e77ca49 100644 --- a/src/superio/smsc/Makefile.inc +++ b/src/superio/smsc/Makefile.inc @@ -1,7 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only subdirs-y += fdc37n972 -subdirs-y += lpc47m10x subdirs-y += lpc47m15x subdirs-y += lpc47n207 subdirs-y += lpc47n217 diff --git a/src/superio/smsc/lpc47m10x/Kconfig b/src/superio/smsc/lpc47m10x/Kconfig deleted file mode 100644 index 9d6b948..0000000 --- a/src/superio/smsc/lpc47m10x/Kconfig +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -config SUPERIO_SMSC_LPC47M10X - bool diff --git a/src/superio/smsc/lpc47m10x/Makefile.inc b/src/superio/smsc/lpc47m10x/Makefile.inc deleted file mode 100644 index d0d4cbc..0000000 --- a/src/superio/smsc/lpc47m10x/Makefile.inc +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-or-later - -bootblock-$(CONFIG_SUPERIO_SMSC_LPC47M10X) += early_serial.c -romstage-$(CONFIG_SUPERIO_SMSC_LPC47M10X) += early_serial.c -ramstage-$(CONFIG_SUPERIO_SMSC_LPC47M10X) += superio.c diff --git a/src/superio/smsc/lpc47m10x/early_serial.c b/src/superio/smsc/lpc47m10x/early_serial.c deleted file mode 100644 index 38a13f5..0000000 --- a/src/superio/smsc/lpc47m10x/early_serial.c +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ - -#include <arch/io.h> -#include <device/pnp_ops.h> -#include <device/pnp.h> -#include <stdint.h> -#include "lpc47m10x.h" - -void pnp_enter_conf_state(pnp_devfn_t dev) -{ - u16 port = dev >> 8; - outb(0x55, port); -} - -void pnp_exit_conf_state(pnp_devfn_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -/** - * Configure the base I/O port of the specified serial device and enable the - * serial device. - * - * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. - * @param iobase Processor I/O port address to assign to this serial device. - */ -void lpc47m10x_enable_serial(pnp_devfn_t dev, u16 iobase) -{ - pnp_enter_conf_state(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/smsc/lpc47m10x/lpc47m10x.h b/src/superio/smsc/lpc47m10x/lpc47m10x.h deleted file mode 100644 index b8bd3a0..0000000 --- a/src/superio/smsc/lpc47m10x/lpc47m10x.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ - -#ifndef SUPERIO_SMSC_LPC47M10X_H -#define SUPERIO_SMSC_LPC47M10X_H - -#include <device/pnp_type.h> -#include <stdint.h> - -#define LPC47M10X2_FDC 0 /* Floppy */ -#define LPC47M10X2_PP 3 /* Parallel Port */ -#define LPC47M10X2_SP1 4 /* Com1 */ -#define LPC47M10X2_SP2 5 /* Com2 */ -#define LPC47M10X2_KBC 7 /* Keyboard & Mouse */ -#define LPC47M10X2_GAME 9 /* GAME */ -#define LPC47M10X2_PME 10 /* PME reg*/ -#define LPC47M10X2_MPU 11 /* MPU-401 MIDI */ - -#define LPC47M10X2_MAX_CONFIG_REGISTER 0x5F - -void lpc47m10x_enable_serial(pnp_devfn_t dev, u16 iobase); - -void pnp_enter_conf_state(pnp_devfn_t dev); -void pnp_exit_conf_state(pnp_devfn_t dev); - -#endif /* SUPERIO_SMSC_LPC47M10X_H */ diff --git a/src/superio/smsc/lpc47m10x/superio.c b/src/superio/smsc/lpc47m10x/superio.c deleted file mode 100644 index cb297a5..0000000 --- a/src/superio/smsc/lpc47m10x/superio.c +++ /dev/null @@ -1,63 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ - -#include <device/device.h> -#include <device/pnp.h> -#include <superio/conf_mode.h> -#include <pc80/keyboard.h> - -#include "lpc47m10x.h" - -/** - * Initialize the specified Super I/O device. - * - * Devices other than COM ports and the keyboard controller are ignored. - * For COM ports, we configure the baud rate. - * - * @param dev Pointer to structure describing a Super I/O device. - */ -static void lpc47m10x_init(struct device *dev) -{ - if (!dev->enabled) - return; - - switch (dev->path.pnp.device) { - case LPC47M10X2_KBC: - pc_keyboard_init(NO_AUX_DEVICE); - break; - } -} - -static struct device_operations ops = { - .read_resources = pnp_read_resources, - .set_resources = pnp_set_resources, - .enable_resources = pnp_enable_resources, - .enable = pnp_alt_enable, - .init = lpc47m10x_init, - .ops_pnp_mode = &pnp_conf_mode_55_aa, -}; - -static struct pnp_info pnp_dev_info[] = { - { NULL, LPC47M10X2_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, 0x07f8, }, - { NULL, LPC47M10X2_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, 0x07f8, }, - { NULL, LPC47M10X2_SP1, PNP_IO0 | PNP_IRQ0, 0x07f8, }, - { NULL, LPC47M10X2_SP2, PNP_IO0 | PNP_IRQ0, 0x07f8, }, - { NULL, LPC47M10X2_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, - 0x07ff, 0x07ff, }, - { NULL, LPC47M10X2_PME, PNP_IO0, 0x0f80, }, -}; - -/** - * Create device structures and allocate resources to devices specified in the - * pnp_dev_info array (above). - * - * @param dev Pointer to structure describing a Super I/O device. - */ -static void enable_dev(struct device *dev) -{ - pnp_enable_devices(dev, &ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info); -} - -struct chip_operations superio_smsc_lpc47m10x_ops = { - CHIP_NAME("SMSC LPC47M10x Super I/O") - .enable_dev = enable_dev -}; -- To view, visit https://review.coreboot.org/c/coreboot/+/69114 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Idf37ade31ddb55697df1a65062c092a0a485e175 Gerrit-Change-Number: 69114 Gerrit-PatchSet: 6 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Reviewer: Felix Held <felix-coreboot(a)felixheld.de> Gerrit-Reviewer: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Felix Singer <felixsinger(a)posteo.net> Gerrit-MessageType: merged

1 0

[XL] Change in coreboot[master]: mb/*/*: Remove AMD agesa family16 boards
by Arthur Heymans (Code Review) 07 Nov '22

07 Nov '22

Arthur Heymans has submitted this change. ( https://review.coreboot.org/c/coreboot/+/69113 ) Change subject: mb/*/*: Remove AMD agesa family16 boards ...................................................................... mb/*/*: Remove AMD agesa family16 boards These boards use the LEGACY_SMP_INIT which is to be deprecated after release 4.18. Change-Id: I43c7075fb6418a86c57c863edccbcb750f8ed402 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69113 Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Elyes Haouas <ehaouas(a)noos.fr> Reviewed-by: Angel Pons <th3fanbus(a)gmail.com> --- D src/mainboard/amd/olivehill/BiosCallOuts.c D src/mainboard/amd/olivehill/Kconfig D src/mainboard/amd/olivehill/Kconfig.name D src/mainboard/amd/olivehill/Makefile.inc D src/mainboard/amd/olivehill/OemCustomize.c D src/mainboard/amd/olivehill/OptionsIds.h D src/mainboard/amd/olivehill/acpi/gpe.asl D src/mainboard/amd/olivehill/acpi/mainboard.asl D src/mainboard/amd/olivehill/acpi/routing.asl D src/mainboard/amd/olivehill/acpi/sata.asl D src/mainboard/amd/olivehill/acpi/sleep.asl D src/mainboard/amd/olivehill/acpi/superio.asl D src/mainboard/amd/olivehill/acpi/thermal.asl D src/mainboard/amd/olivehill/acpi/usb_oc.asl D src/mainboard/amd/olivehill/board_info.txt D src/mainboard/amd/olivehill/bootblock.c D src/mainboard/amd/olivehill/buildOpts.c D src/mainboard/amd/olivehill/cmos.layout D src/mainboard/amd/olivehill/devicetree.cb D src/mainboard/amd/olivehill/dsdt.asl D src/mainboard/amd/olivehill/irq_tables.c D src/mainboard/amd/olivehill/mainboard.c D src/mainboard/asrock/imb-a180/BiosCallOuts.c D src/mainboard/asrock/imb-a180/Kconfig D src/mainboard/asrock/imb-a180/Kconfig.name D src/mainboard/asrock/imb-a180/Makefile.inc D src/mainboard/asrock/imb-a180/OemCustomize.c D src/mainboard/asrock/imb-a180/OptionsIds.h D src/mainboard/asrock/imb-a180/acpi/gpe.asl D src/mainboard/asrock/imb-a180/acpi/mainboard.asl D src/mainboard/asrock/imb-a180/acpi/routing.asl D src/mainboard/asrock/imb-a180/acpi/sata.asl D src/mainboard/asrock/imb-a180/acpi/sleep.asl D src/mainboard/asrock/imb-a180/acpi/superio.asl D src/mainboard/asrock/imb-a180/acpi/thermal.asl D src/mainboard/asrock/imb-a180/acpi/usb_oc.asl D src/mainboard/asrock/imb-a180/board_info.txt D src/mainboard/asrock/imb-a180/bootblock.c D src/mainboard/asrock/imb-a180/buildOpts.c D src/mainboard/asrock/imb-a180/cmos.layout D src/mainboard/asrock/imb-a180/devicetree.cb D src/mainboard/asrock/imb-a180/dsdt.asl D src/mainboard/asrock/imb-a180/irq_tables.c D src/mainboard/asrock/imb-a180/mainboard.c D src/mainboard/asus/am1i-a/BiosCallOuts.c D src/mainboard/asus/am1i-a/Kconfig D src/mainboard/asus/am1i-a/Kconfig.name D src/mainboard/asus/am1i-a/Makefile.inc D src/mainboard/asus/am1i-a/OemCustomize.c D src/mainboard/asus/am1i-a/OptionsIds.h D src/mainboard/asus/am1i-a/acpi/mainboard.asl D src/mainboard/asus/am1i-a/acpi/routing.asl D src/mainboard/asus/am1i-a/acpi/sata.asl D src/mainboard/asus/am1i-a/acpi/sleep.asl D src/mainboard/asus/am1i-a/acpi/superio.asl D src/mainboard/asus/am1i-a/board_info.txt D src/mainboard/asus/am1i-a/bootblock.c D src/mainboard/asus/am1i-a/buildOpts.c D src/mainboard/asus/am1i-a/cmos.default D src/mainboard/asus/am1i-a/cmos.layout D src/mainboard/asus/am1i-a/devicetree.cb D src/mainboard/asus/am1i-a/dsdt.asl D src/mainboard/asus/am1i-a/irq_tables.c D src/mainboard/asus/am1i-a/mainboard.c D src/mainboard/bap/Kconfig D src/mainboard/bap/Kconfig.name D src/mainboard/bap/ode_e20XX/BiosCallOuts.c D src/mainboard/bap/ode_e20XX/Kconfig D src/mainboard/bap/ode_e20XX/Kconfig.name D src/mainboard/bap/ode_e20XX/Makefile.inc D src/mainboard/bap/ode_e20XX/OemCustomize.c D src/mainboard/bap/ode_e20XX/OptionsIds.h D src/mainboard/bap/ode_e20XX/acpi/gpe.asl D src/mainboard/bap/ode_e20XX/acpi/mainboard.asl D src/mainboard/bap/ode_e20XX/acpi/routing.asl D src/mainboard/bap/ode_e20XX/acpi/sata.asl D src/mainboard/bap/ode_e20XX/acpi/sleep.asl D src/mainboard/bap/ode_e20XX/acpi/superio.asl D src/mainboard/bap/ode_e20XX/acpi/thermal.asl D src/mainboard/bap/ode_e20XX/acpi/usb_oc.asl D src/mainboard/bap/ode_e20XX/board_info.txt D src/mainboard/bap/ode_e20XX/bootblock.c D src/mainboard/bap/ode_e20XX/buildOpts.c D src/mainboard/bap/ode_e20XX/cmos.layout D src/mainboard/bap/ode_e20XX/devicetree.cb D src/mainboard/bap/ode_e20XX/dsdt.asl D src/mainboard/bap/ode_e20XX/irq_tables.c D src/mainboard/bap/ode_e20XX/mainboard.c D src/mainboard/bap/ode_e20XX/spd/BAP_Q7_1066.spd.hex D src/mainboard/bap/ode_e20XX/spd/BAP_Q7_800.spd.hex D src/mainboard/biostar/a68n_5200/BiosCallOuts.c D src/mainboard/biostar/a68n_5200/Kconfig D src/mainboard/biostar/a68n_5200/Kconfig.name D src/mainboard/biostar/a68n_5200/Makefile.inc D src/mainboard/biostar/a68n_5200/OemCustomize.c D src/mainboard/biostar/a68n_5200/OptionsIds.h D src/mainboard/biostar/a68n_5200/acpi/AmdImc.asl D src/mainboard/biostar/a68n_5200/acpi/gpe.asl D src/mainboard/biostar/a68n_5200/acpi/mainboard.asl D src/mainboard/biostar/a68n_5200/acpi/routing.asl D src/mainboard/biostar/a68n_5200/acpi/sata.asl D src/mainboard/biostar/a68n_5200/acpi/sleep.asl D src/mainboard/biostar/a68n_5200/acpi/superio.asl D src/mainboard/biostar/a68n_5200/acpi/thermal.asl D src/mainboard/biostar/a68n_5200/acpi/usb_oc.asl D src/mainboard/biostar/a68n_5200/board_info.txt D src/mainboard/biostar/a68n_5200/bootblock.c D src/mainboard/biostar/a68n_5200/buildOpts.c D src/mainboard/biostar/a68n_5200/cmos.layout D src/mainboard/biostar/a68n_5200/devicetree.cb D src/mainboard/biostar/a68n_5200/dsdt.asl D src/mainboard/biostar/a68n_5200/irq_tables.c D src/mainboard/biostar/a68n_5200/mainboard.c D src/mainboard/biostar/am1ml/BiosCallOuts.c D src/mainboard/biostar/am1ml/Kconfig D src/mainboard/biostar/am1ml/Kconfig.name D src/mainboard/biostar/am1ml/Makefile.inc D src/mainboard/biostar/am1ml/OemCustomize.c D src/mainboard/biostar/am1ml/OptionsIds.h D src/mainboard/biostar/am1ml/acpi/flag0.asl D src/mainboard/biostar/am1ml/acpi/gpe.asl D src/mainboard/biostar/am1ml/acpi/ide.asl D src/mainboard/biostar/am1ml/acpi/mainboard.asl D src/mainboard/biostar/am1ml/acpi/routing.asl D src/mainboard/biostar/am1ml/acpi/sata.asl D src/mainboard/biostar/am1ml/acpi/sio.asl D src/mainboard/biostar/am1ml/acpi/sleep.asl D src/mainboard/biostar/am1ml/acpi/superio.asl D src/mainboard/biostar/am1ml/acpi/thermal.asl D src/mainboard/biostar/am1ml/acpi/usb_oc.asl D src/mainboard/biostar/am1ml/board_info.txt D src/mainboard/biostar/am1ml/bootblock.c D src/mainboard/biostar/am1ml/buildOpts.c D src/mainboard/biostar/am1ml/cmos.layout D src/mainboard/biostar/am1ml/devicetree.cb D src/mainboard/biostar/am1ml/dsdt.asl D src/mainboard/biostar/am1ml/irq_tables.c D src/mainboard/biostar/am1ml/mainboard.c D src/mainboard/gizmosphere/Kconfig D src/mainboard/gizmosphere/Kconfig.name D src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c D src/mainboard/gizmosphere/gizmo2/Kconfig D src/mainboard/gizmosphere/gizmo2/Kconfig.name D src/mainboard/gizmosphere/gizmo2/Makefile.inc D src/mainboard/gizmosphere/gizmo2/OemCustomize.c D src/mainboard/gizmosphere/gizmo2/OptionsIds.h D src/mainboard/gizmosphere/gizmo2/acpi/gpe.asl D src/mainboard/gizmosphere/gizmo2/acpi/mainboard.asl D src/mainboard/gizmosphere/gizmo2/acpi/routing.asl D src/mainboard/gizmosphere/gizmo2/acpi/sata.asl D src/mainboard/gizmosphere/gizmo2/acpi/sleep.asl D src/mainboard/gizmosphere/gizmo2/acpi/superio.asl D src/mainboard/gizmosphere/gizmo2/acpi/thermal.asl D src/mainboard/gizmosphere/gizmo2/acpi/usb_oc.asl D src/mainboard/gizmosphere/gizmo2/board_info.txt D src/mainboard/gizmosphere/gizmo2/bootblock.c D src/mainboard/gizmosphere/gizmo2/buildOpts.c D src/mainboard/gizmosphere/gizmo2/cmos.layout D src/mainboard/gizmosphere/gizmo2/devicetree.cb D src/mainboard/gizmosphere/gizmo2/dsdt.asl D src/mainboard/gizmosphere/gizmo2/irq_tables.c D src/mainboard/gizmosphere/gizmo2/mainboard.c D src/mainboard/gizmosphere/gizmo2/spd/Micron_MT41J128M16JT.spd.hex D src/mainboard/hp/abm/BiosCallOuts.c D src/mainboard/hp/abm/Kconfig D src/mainboard/hp/abm/Kconfig.name D src/mainboard/hp/abm/Makefile.inc D src/mainboard/hp/abm/OemCustomize.c D src/mainboard/hp/abm/OptionsIds.h D src/mainboard/hp/abm/acpi/gpe.asl D src/mainboard/hp/abm/acpi/mainboard.asl D src/mainboard/hp/abm/acpi/routing.asl D src/mainboard/hp/abm/acpi/sata.asl D src/mainboard/hp/abm/acpi/sleep.asl D src/mainboard/hp/abm/acpi/superio.asl D src/mainboard/hp/abm/acpi/thermal.asl D src/mainboard/hp/abm/acpi/usb_oc.asl D src/mainboard/hp/abm/board_info.txt D src/mainboard/hp/abm/bootblock.c D src/mainboard/hp/abm/buildOpts.c D src/mainboard/hp/abm/cmos.layout D src/mainboard/hp/abm/devicetree.cb D src/mainboard/hp/abm/dsdt.asl D src/mainboard/hp/abm/irq_tables.c D src/mainboard/hp/abm/mainboard.c 185 files changed, 17 insertions(+), 10,568 deletions(-) Approvals: build bot (Jenkins): Verified Elyes Haouas: Looks good to me, approved Angel Pons: Looks good to me, approved -- To view, visit https://review.coreboot.org/c/coreboot/+/69113 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I43c7075fb6418a86c57c863edccbcb750f8ed402 Gerrit-Change-Number: 69113 Gerrit-PatchSet: 3 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-MessageType: merged

1 0

[XL] Change in coreboot[master]: mb/*/*: Remove AMD family14 boards
by Arthur Heymans (Code Review) 07 Nov '22

07 Nov '22

Arthur Heymans has submitted this change. ( https://review.coreboot.org/c/coreboot/+/69112 ) Change subject: mb/*/*: Remove AMD family14 boards ...................................................................... mb/*/*: Remove AMD family14 boards These boards use the LEGACY_SMP_INIT which is to be deprecated after release 4.18. Change-Id: I3495d140a244bbbf63e846fcd963d69907e09719 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69112 Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Elyes Haouas <ehaouas(a)noos.fr> Reviewed-by: Angel Pons <th3fanbus(a)gmail.com> --- D src/mainboard/amd/inagua/BiosCallOuts.c D src/mainboard/amd/inagua/Kconfig D src/mainboard/amd/inagua/Kconfig.name D src/mainboard/amd/inagua/Makefile.inc D src/mainboard/amd/inagua/OemCustomize.c D src/mainboard/amd/inagua/OptionsIds.h D src/mainboard/amd/inagua/acpi/gpe.asl D src/mainboard/amd/inagua/acpi/ide.asl D src/mainboard/amd/inagua/acpi/routing.asl D src/mainboard/amd/inagua/acpi/sata.asl D src/mainboard/amd/inagua/acpi/sleep.asl D src/mainboard/amd/inagua/acpi/superio.asl D src/mainboard/amd/inagua/acpi/usb_oc.asl D src/mainboard/amd/inagua/board_info.txt D src/mainboard/amd/inagua/bootblock.c D src/mainboard/amd/inagua/buildOpts.c D src/mainboard/amd/inagua/cmos.layout D src/mainboard/amd/inagua/devicetree.cb D src/mainboard/amd/inagua/dsdt.asl D src/mainboard/amd/inagua/irq_tables.c D src/mainboard/amd/inagua/mainboard.c D src/mainboard/amd/inagua/platform_cfg.h D src/mainboard/amd/persimmon/BiosCallOuts.c D src/mainboard/amd/persimmon/Kconfig D src/mainboard/amd/persimmon/Kconfig.name D src/mainboard/amd/persimmon/Makefile.inc D src/mainboard/amd/persimmon/OemCustomize.c D src/mainboard/amd/persimmon/OptionsIds.h D src/mainboard/amd/persimmon/acpi/gpe.asl D src/mainboard/amd/persimmon/acpi/ide.asl D src/mainboard/amd/persimmon/acpi/routing.asl D src/mainboard/amd/persimmon/acpi/sata.asl D src/mainboard/amd/persimmon/acpi/sleep.asl D src/mainboard/amd/persimmon/acpi/superio.asl D src/mainboard/amd/persimmon/acpi/usb_oc.asl D src/mainboard/amd/persimmon/board_info.txt D src/mainboard/amd/persimmon/bootblock.c D src/mainboard/amd/persimmon/buildOpts.c D src/mainboard/amd/persimmon/cmos.layout D src/mainboard/amd/persimmon/devicetree.cb D src/mainboard/amd/persimmon/dsdt.asl D src/mainboard/amd/persimmon/irq_tables.c D src/mainboard/amd/persimmon/mainboard.c D src/mainboard/amd/persimmon/platform_cfg.h D src/mainboard/amd/south_station/BiosCallOuts.c D src/mainboard/amd/south_station/Kconfig D src/mainboard/amd/south_station/Kconfig.name D src/mainboard/amd/south_station/Makefile.inc D src/mainboard/amd/south_station/OemCustomize.c D src/mainboard/amd/south_station/OptionsIds.h D src/mainboard/amd/south_station/acpi/gpe.asl D src/mainboard/amd/south_station/acpi/ide.asl D src/mainboard/amd/south_station/acpi/routing.asl D src/mainboard/amd/south_station/acpi/sata.asl D src/mainboard/amd/south_station/acpi/sleep.asl D src/mainboard/amd/south_station/acpi/superio.asl D src/mainboard/amd/south_station/acpi/usb_oc.asl D src/mainboard/amd/south_station/board_info.txt D src/mainboard/amd/south_station/bootblock.c D src/mainboard/amd/south_station/buildOpts.c D src/mainboard/amd/south_station/cmos.layout D src/mainboard/amd/south_station/devicetree.cb D src/mainboard/amd/south_station/dsdt.asl D src/mainboard/amd/south_station/irq_tables.c D src/mainboard/amd/south_station/mainboard.c D src/mainboard/amd/south_station/platform_cfg.h D src/mainboard/amd/union_station/BiosCallOuts.c D src/mainboard/amd/union_station/Kconfig D src/mainboard/amd/union_station/Kconfig.name D src/mainboard/amd/union_station/Makefile.inc D src/mainboard/amd/union_station/OemCustomize.c D src/mainboard/amd/union_station/OptionsIds.h D src/mainboard/amd/union_station/acpi/gpe.asl D src/mainboard/amd/union_station/acpi/ide.asl D src/mainboard/amd/union_station/acpi/routing.asl D src/mainboard/amd/union_station/acpi/sata.asl D src/mainboard/amd/union_station/acpi/sleep.asl D src/mainboard/amd/union_station/acpi/superio.asl D src/mainboard/amd/union_station/acpi/usb_oc.asl D src/mainboard/amd/union_station/board_info.txt D src/mainboard/amd/union_station/bootblock.c D src/mainboard/amd/union_station/buildOpts.c D src/mainboard/amd/union_station/cmos.layout D src/mainboard/amd/union_station/devicetree.cb D src/mainboard/amd/union_station/dsdt.asl D src/mainboard/amd/union_station/irq_tables.c D src/mainboard/amd/union_station/mainboard.c D src/mainboard/amd/union_station/platform_cfg.h D src/mainboard/asrock/e350m1/BiosCallOuts.c D src/mainboard/asrock/e350m1/Kconfig D src/mainboard/asrock/e350m1/Kconfig.name D src/mainboard/asrock/e350m1/Makefile.inc D src/mainboard/asrock/e350m1/OemCustomize.c D src/mainboard/asrock/e350m1/OptionsIds.h D src/mainboard/asrock/e350m1/acpi/gpe.asl D src/mainboard/asrock/e350m1/acpi/routing.asl D src/mainboard/asrock/e350m1/acpi/sata.asl D src/mainboard/asrock/e350m1/acpi/sleep.asl D src/mainboard/asrock/e350m1/acpi/superio.asl D src/mainboard/asrock/e350m1/acpi/usb_oc.asl D src/mainboard/asrock/e350m1/board_info.txt D src/mainboard/asrock/e350m1/bootblock.c D src/mainboard/asrock/e350m1/buildOpts.c D src/mainboard/asrock/e350m1/cmos.layout D src/mainboard/asrock/e350m1/devicetree.cb D src/mainboard/asrock/e350m1/dsdt.asl D src/mainboard/asrock/e350m1/irq_tables.c D src/mainboard/asrock/e350m1/mainboard.c D src/mainboard/asrock/e350m1/platform_cfg.h D src/mainboard/elmex/Kconfig D src/mainboard/elmex/Kconfig.name D src/mainboard/elmex/pcm205400/BiosCallOuts.c D src/mainboard/elmex/pcm205400/Kconfig D src/mainboard/elmex/pcm205400/Kconfig.name D src/mainboard/elmex/pcm205400/Makefile.inc D src/mainboard/elmex/pcm205400/OemCustomize.c D src/mainboard/elmex/pcm205400/OptionsIds.h D src/mainboard/elmex/pcm205400/acpi/gpe.asl D src/mainboard/elmex/pcm205400/acpi/ide.asl D src/mainboard/elmex/pcm205400/acpi/routing.asl D src/mainboard/elmex/pcm205400/acpi/sata.asl D src/mainboard/elmex/pcm205400/acpi/sleep.asl D src/mainboard/elmex/pcm205400/acpi/superio.asl D src/mainboard/elmex/pcm205400/acpi/usb_oc.asl D src/mainboard/elmex/pcm205400/board_info.txt D src/mainboard/elmex/pcm205400/bootblock.c D src/mainboard/elmex/pcm205400/buildOpts.c D src/mainboard/elmex/pcm205400/cmos.layout D src/mainboard/elmex/pcm205400/devicetree.cb D src/mainboard/elmex/pcm205400/dsdt.asl D src/mainboard/elmex/pcm205400/irq_tables.c D src/mainboard/elmex/pcm205400/mainboard.c D src/mainboard/elmex/pcm205400/platform_cfg.h D src/mainboard/elmex/pcm205401/Kconfig D src/mainboard/elmex/pcm205401/Kconfig.name D src/mainboard/elmex/pcm205401/board_info.txt D src/mainboard/gizmosphere/gizmo/BiosCallOuts.c D src/mainboard/gizmosphere/gizmo/Kconfig D src/mainboard/gizmosphere/gizmo/Kconfig.name D src/mainboard/gizmosphere/gizmo/Makefile.inc D src/mainboard/gizmosphere/gizmo/OemCustomize.c D src/mainboard/gizmosphere/gizmo/OptionsIds.h D src/mainboard/gizmosphere/gizmo/acpi/gpe.asl D src/mainboard/gizmosphere/gizmo/acpi/ide.asl D src/mainboard/gizmosphere/gizmo/acpi/routing.asl D src/mainboard/gizmosphere/gizmo/acpi/sata.asl D src/mainboard/gizmosphere/gizmo/acpi/sleep.asl D src/mainboard/gizmosphere/gizmo/acpi/superio.asl D src/mainboard/gizmosphere/gizmo/acpi/usb_oc.asl D src/mainboard/gizmosphere/gizmo/board_info.txt D src/mainboard/gizmosphere/gizmo/buildOpts.c D src/mainboard/gizmosphere/gizmo/cmos.layout D src/mainboard/gizmosphere/gizmo/devicetree.cb D src/mainboard/gizmosphere/gizmo/dsdt.asl D src/mainboard/gizmosphere/gizmo/irq_tables.c D src/mainboard/gizmosphere/gizmo/mainboard.c D src/mainboard/gizmosphere/gizmo/platform_cfg.h D src/mainboard/gizmosphere/gizmo/spd/Elpida_EDJ2116DEBG.spd.hex D src/mainboard/jetway/Kconfig D src/mainboard/jetway/Kconfig.name D src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c D src/mainboard/jetway/nf81-t56n-lf/Kconfig D src/mainboard/jetway/nf81-t56n-lf/Kconfig.name D src/mainboard/jetway/nf81-t56n-lf/Makefile.inc D src/mainboard/jetway/nf81-t56n-lf/OemCustomize.c D src/mainboard/jetway/nf81-t56n-lf/OptionsIds.h D src/mainboard/jetway/nf81-t56n-lf/acpi/gpe.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/routing.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/sata.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/sleep.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/superio.asl D src/mainboard/jetway/nf81-t56n-lf/acpi/usb_oc.asl D src/mainboard/jetway/nf81-t56n-lf/board_info.txt D src/mainboard/jetway/nf81-t56n-lf/bootblock.c D src/mainboard/jetway/nf81-t56n-lf/buildOpts.c D src/mainboard/jetway/nf81-t56n-lf/cmos.layout D src/mainboard/jetway/nf81-t56n-lf/devicetree.cb D src/mainboard/jetway/nf81-t56n-lf/dsdt.asl D src/mainboard/jetway/nf81-t56n-lf/irq_tables.c D src/mainboard/jetway/nf81-t56n-lf/mainboard.c D src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h D src/mainboard/lippert/Kconfig D src/mainboard/lippert/Kconfig.name D src/mainboard/lippert/frontrunner-af/Kconfig D src/mainboard/lippert/frontrunner-af/Kconfig.name D src/mainboard/lippert/frontrunner-af/Makefile.inc D src/mainboard/lippert/frontrunner-af/OptionsIds.h D src/mainboard/lippert/frontrunner-af/acpi/gpe.asl D src/mainboard/lippert/frontrunner-af/acpi/routing.asl D src/mainboard/lippert/frontrunner-af/acpi/sata.asl D src/mainboard/lippert/frontrunner-af/acpi/sleep.asl D src/mainboard/lippert/frontrunner-af/acpi/superio.asl D src/mainboard/lippert/frontrunner-af/acpi/usb_oc.asl D src/mainboard/lippert/frontrunner-af/board_info.txt D src/mainboard/lippert/frontrunner-af/buildOpts.c D src/mainboard/lippert/frontrunner-af/cmos.layout D src/mainboard/lippert/frontrunner-af/dsdt.asl D src/mainboard/lippert/frontrunner-af/irq_tables.c D src/mainboard/lippert/frontrunner-af/platform_cfg.h D src/mainboard/lippert/frontrunner-af/sema.c D src/mainboard/lippert/frontrunner-af/sema.h D src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/BiosCallOuts.c D src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/OemCustomize.c D src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/board_info.txt D src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/bootblock.c D src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/devicetree.cb D src/mainboard/lippert/frontrunner-af/variants/frontrunner-af/mainboard.c D src/mainboard/lippert/frontrunner-af/variants/toucan-af/BiosCallOuts.c D src/mainboard/lippert/frontrunner-af/variants/toucan-af/OemCustomize.c D src/mainboard/lippert/frontrunner-af/variants/toucan-af/board_info.txt D src/mainboard/lippert/frontrunner-af/variants/toucan-af/bootblock.c D src/mainboard/lippert/frontrunner-af/variants/toucan-af/devicetree.cb D src/mainboard/lippert/frontrunner-af/variants/toucan-af/mainboard.c D src/mainboard/pcengines/apu1/BiosCallOuts.c D src/mainboard/pcengines/apu1/Kconfig D src/mainboard/pcengines/apu1/Kconfig.name D src/mainboard/pcengines/apu1/Makefile.inc D src/mainboard/pcengines/apu1/OemCustomize.c D src/mainboard/pcengines/apu1/OptionsIds.h D src/mainboard/pcengines/apu1/acpi/buttons.asl D src/mainboard/pcengines/apu1/acpi/gpe.asl D src/mainboard/pcengines/apu1/acpi/gpio.asl D src/mainboard/pcengines/apu1/acpi/leds.asl D src/mainboard/pcengines/apu1/acpi/routing.asl D src/mainboard/pcengines/apu1/acpi/sata.asl D src/mainboard/pcengines/apu1/acpi/sleep.asl D src/mainboard/pcengines/apu1/acpi/superio.asl D src/mainboard/pcengines/apu1/acpi/usb_oc.asl D src/mainboard/pcengines/apu1/board_info.txt D src/mainboard/pcengines/apu1/bootblock.c D src/mainboard/pcengines/apu1/buildOpts.c D src/mainboard/pcengines/apu1/cmos.default D src/mainboard/pcengines/apu1/cmos.layout D src/mainboard/pcengines/apu1/devicetree.cb D src/mainboard/pcengines/apu1/dsdt.asl D src/mainboard/pcengines/apu1/gpio_ftns.c D src/mainboard/pcengines/apu1/gpio_ftns.h D src/mainboard/pcengines/apu1/irq_tables.c D src/mainboard/pcengines/apu1/mainboard.c D src/mainboard/pcengines/apu1/platform_cfg.h D src/mainboard/pcengines/apu1/romstage.c D src/mainboard/pcengines/apu1/spd/HYNIX-H5TQ2G83CFR.spd.hex D src/mainboard/pcengines/apu1/spd/HYNIX-H5TQ4G83MFR.spd.hex 243 files changed, 17 insertions(+), 20,586 deletions(-) Approvals: build bot (Jenkins): Verified Elyes Haouas: Looks good to me, but someone else must approve Angel Pons: Looks good to me, approved -- To view, visit https://review.coreboot.org/c/coreboot/+/69112 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3495d140a244bbbf63e846fcd963d69907e09719 Gerrit-Change-Number: 69112 Gerrit-PatchSet: 2 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Reviewer: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-MessageType: merged

1 0

[XL] Change in coreboot[master]: mb/*/*: Remove AMD FAMILY15TN boards
by Arthur Heymans (Code Review) 07 Nov '22

07 Nov '22

Arthur Heymans has submitted this change. ( https://review.coreboot.org/c/coreboot/+/69111 ) Change subject: mb/*/*: Remove AMD FAMILY15TN boards ...................................................................... mb/*/*: Remove AMD FAMILY15TN boards These boards use the LEGACY_SMP_INIT which is to be deprecated after release 4.18. Change-Id: I9efb5cb1149cc4cf6337c47af8a2f4c4b55f4368 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69111 Tested-by: build bot (Jenkins) <no-reply(a)coreboot.org> Reviewed-by: Elyes Haouas <ehaouas(a)noos.fr> Reviewed-by: Angel Pons <th3fanbus(a)gmail.com> --- D src/mainboard/amd/parmer/BiosCallOuts.c D src/mainboard/amd/parmer/Kconfig D src/mainboard/amd/parmer/Kconfig.name D src/mainboard/amd/parmer/Makefile.inc D src/mainboard/amd/parmer/OemCustomize.c D src/mainboard/amd/parmer/acpi/gpe.asl D src/mainboard/amd/parmer/acpi/mainboard.asl D src/mainboard/amd/parmer/acpi/routing.asl D src/mainboard/amd/parmer/acpi/sata.asl D src/mainboard/amd/parmer/acpi/sleep.asl D src/mainboard/amd/parmer/acpi/superio.asl D src/mainboard/amd/parmer/acpi/thermal.asl D src/mainboard/amd/parmer/acpi/usb_oc.asl D src/mainboard/amd/parmer/board_info.txt D src/mainboard/amd/parmer/bootblock.c D src/mainboard/amd/parmer/buildOpts.c D src/mainboard/amd/parmer/cmos.layout D src/mainboard/amd/parmer/devicetree.cb D src/mainboard/amd/parmer/dsdt.asl D src/mainboard/amd/parmer/irq_tables.c D src/mainboard/amd/parmer/mainboard.c D src/mainboard/amd/thatcher/BiosCallOuts.c D src/mainboard/amd/thatcher/Kconfig D src/mainboard/amd/thatcher/Kconfig.name D src/mainboard/amd/thatcher/Makefile.inc D src/mainboard/amd/thatcher/OemCustomize.c D src/mainboard/amd/thatcher/acpi/cpstate.asl D src/mainboard/amd/thatcher/acpi/gpe.asl D src/mainboard/amd/thatcher/acpi/mainboard.asl D src/mainboard/amd/thatcher/acpi/routing.asl D src/mainboard/amd/thatcher/acpi/sata.asl D src/mainboard/amd/thatcher/acpi/sleep.asl D src/mainboard/amd/thatcher/acpi/superio.asl D src/mainboard/amd/thatcher/acpi/thermal.asl D src/mainboard/amd/thatcher/acpi/usb_oc.asl D src/mainboard/amd/thatcher/board_info.txt D src/mainboard/amd/thatcher/bootblock.c D src/mainboard/amd/thatcher/buildOpts.c D src/mainboard/amd/thatcher/cmos.layout D src/mainboard/amd/thatcher/devicetree.cb D src/mainboard/amd/thatcher/dsdt.asl D src/mainboard/amd/thatcher/irq_tables.c D src/mainboard/amd/thatcher/mainboard.c D src/mainboard/asus/a88xm-e/BiosCallOuts.c D src/mainboard/asus/a88xm-e/Kconfig D src/mainboard/asus/a88xm-e/Kconfig.name D src/mainboard/asus/a88xm-e/Makefile.inc D src/mainboard/asus/a88xm-e/OemCustomize.c D src/mainboard/asus/a88xm-e/acpi/cpstate.asl D src/mainboard/asus/a88xm-e/acpi/gpe.asl D src/mainboard/asus/a88xm-e/acpi/routing.asl D src/mainboard/asus/a88xm-e/acpi/sata.asl D src/mainboard/asus/a88xm-e/acpi/si.asl D src/mainboard/asus/a88xm-e/acpi/sleep.asl D src/mainboard/asus/a88xm-e/acpi/superio.asl D src/mainboard/asus/a88xm-e/acpi/thermal.asl D src/mainboard/asus/a88xm-e/acpi/usb_oc.asl D src/mainboard/asus/a88xm-e/board_info.txt D src/mainboard/asus/a88xm-e/bootblock.c D src/mainboard/asus/a88xm-e/buildOpts.c D src/mainboard/asus/a88xm-e/cmos.layout D src/mainboard/asus/a88xm-e/devicetree.cb D src/mainboard/asus/a88xm-e/dsdt.asl D src/mainboard/asus/a88xm-e/irq_tables.c D src/mainboard/asus/a88xm-e/mainboard.c D src/mainboard/asus/a88xm-e/mptable.c D src/mainboard/asus/a88xm-e/romstage.c D src/mainboard/asus/f2a85-m/BiosCallOuts.c D src/mainboard/asus/f2a85-m/Kconfig D src/mainboard/asus/f2a85-m/Kconfig.name D src/mainboard/asus/f2a85-m/Makefile.inc D src/mainboard/asus/f2a85-m/OemCustomize.c D src/mainboard/asus/f2a85-m/acpi/cpstate.asl D src/mainboard/asus/f2a85-m/acpi/gpe.asl D src/mainboard/asus/f2a85-m/acpi/routing.asl D src/mainboard/asus/f2a85-m/acpi/sata.asl D src/mainboard/asus/f2a85-m/acpi/sleep.asl D src/mainboard/asus/f2a85-m/acpi/superio.asl D src/mainboard/asus/f2a85-m/acpi/thermal.asl D src/mainboard/asus/f2a85-m/acpi/usb_oc.asl D src/mainboard/asus/f2a85-m/board_info.txt D src/mainboard/asus/f2a85-m/bootblock.c D src/mainboard/asus/f2a85-m/buildOpts.c D src/mainboard/asus/f2a85-m/cmos.layout D src/mainboard/asus/f2a85-m/devicetree_f2a85-m.cb D src/mainboard/asus/f2a85-m/devicetree_f2a85-m_le.cb D src/mainboard/asus/f2a85-m/devicetree_f2a85-m_pro.cb D src/mainboard/asus/f2a85-m/dsdt.asl D src/mainboard/asus/f2a85-m/irq_tables.c D src/mainboard/asus/f2a85-m/mainboard.c D src/mainboard/asus/f2a85-m/romstage.c D src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c D src/mainboard/hp/pavilion_m6_1035dx/Kconfig D src/mainboard/hp/pavilion_m6_1035dx/Kconfig.name D src/mainboard/hp/pavilion_m6_1035dx/Makefile.inc D src/mainboard/hp/pavilion_m6_1035dx/OemCustomize.c D src/mainboard/hp/pavilion_m6_1035dx/acpi/ec.asl D src/mainboard/hp/pavilion_m6_1035dx/acpi/gpe.asl D src/mainboard/hp/pavilion_m6_1035dx/acpi/mainboard.asl D src/mainboard/hp/pavilion_m6_1035dx/acpi/routing.asl D src/mainboard/hp/pavilion_m6_1035dx/acpi/sata.asl D src/mainboard/hp/pavilion_m6_1035dx/acpi/sleep.asl D src/mainboard/hp/pavilion_m6_1035dx/acpi/superio.asl D src/mainboard/hp/pavilion_m6_1035dx/acpi/thermal.asl D src/mainboard/hp/pavilion_m6_1035dx/acpi/usb_oc.asl D src/mainboard/hp/pavilion_m6_1035dx/board_info.txt D src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c D src/mainboard/hp/pavilion_m6_1035dx/cmos.default D src/mainboard/hp/pavilion_m6_1035dx/cmos.layout D src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb D src/mainboard/hp/pavilion_m6_1035dx/dsdt.asl D src/mainboard/hp/pavilion_m6_1035dx/ec.c D src/mainboard/hp/pavilion_m6_1035dx/ec.h D src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c D src/mainboard/hp/pavilion_m6_1035dx/mainboard.c D src/mainboard/hp/pavilion_m6_1035dx/mainboard.h D src/mainboard/hp/pavilion_m6_1035dx/smihandler.c D src/mainboard/lenovo/g505s/BiosCallOuts.c D src/mainboard/lenovo/g505s/Kconfig D src/mainboard/lenovo/g505s/Kconfig.name D src/mainboard/lenovo/g505s/Makefile.inc D src/mainboard/lenovo/g505s/OemCustomize.c D src/mainboard/lenovo/g505s/acpi/ec.asl D src/mainboard/lenovo/g505s/acpi/gpe.asl D src/mainboard/lenovo/g505s/acpi/mainboard.asl D src/mainboard/lenovo/g505s/acpi/routing.asl D src/mainboard/lenovo/g505s/acpi/sata.asl D src/mainboard/lenovo/g505s/acpi/sleep.asl D src/mainboard/lenovo/g505s/acpi/superio.asl D src/mainboard/lenovo/g505s/acpi/thermal.asl D src/mainboard/lenovo/g505s/acpi/usb_oc.asl D src/mainboard/lenovo/g505s/board_info.txt D src/mainboard/lenovo/g505s/buildOpts.c D src/mainboard/lenovo/g505s/cmos.layout D src/mainboard/lenovo/g505s/config_seabios D src/mainboard/lenovo/g505s/devicetree.cb D src/mainboard/lenovo/g505s/dsdt.asl D src/mainboard/lenovo/g505s/ec.c D src/mainboard/lenovo/g505s/ec.h D src/mainboard/lenovo/g505s/irq_tables.c D src/mainboard/lenovo/g505s/mainboard.c D src/mainboard/lenovo/g505s/mainboard.h D src/mainboard/lenovo/g505s/smihandler.c D src/mainboard/msi/ms7721/BiosCallOuts.c D src/mainboard/msi/ms7721/Kconfig D src/mainboard/msi/ms7721/Kconfig.name D src/mainboard/msi/ms7721/Makefile.inc D src/mainboard/msi/ms7721/OemCustomize.c D src/mainboard/msi/ms7721/acpi/cpstate.asl D src/mainboard/msi/ms7721/acpi/gpe.asl D src/mainboard/msi/ms7721/acpi/routing.asl D src/mainboard/msi/ms7721/acpi/sata.asl D src/mainboard/msi/ms7721/acpi/sleep.asl D src/mainboard/msi/ms7721/acpi/superio.asl D src/mainboard/msi/ms7721/acpi/thermal.asl D src/mainboard/msi/ms7721/board_info.txt D src/mainboard/msi/ms7721/bootblock.c D src/mainboard/msi/ms7721/buildOpts.c D src/mainboard/msi/ms7721/cmos.layout D src/mainboard/msi/ms7721/devicetree.cb D src/mainboard/msi/ms7721/dsdt.asl D src/mainboard/msi/ms7721/irq_tables.c D src/mainboard/msi/ms7721/mainboard.c D src/mainboard/msi/ms7721/romstage.c 164 files changed, 17 insertions(+), 10,039 deletions(-) Approvals: build bot (Jenkins): Verified Elyes Haouas: Looks good to me, but someone else must approve Angel Pons: Looks good to me, approved -- To view, visit https://review.coreboot.org/c/coreboot/+/69111 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9efb5cb1149cc4cf6337c47af8a2f4c4b55f4368 Gerrit-Change-Number: 69111 Gerrit-PatchSet: 2 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Michał Kopeć <michal.kopec(a)3mdeb.com> Gerrit-CC: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-CC: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-MessageType: merged

1 0

[XL] Change in coreboot[master]: mb/*/*: Remove AMD FAMILY15TN boards
by Arthur Heymans (Code Review) 07 Nov '22

07 Nov '22

Attention is currently required from: Paul Menzel, Alexander Couzens. Arthur Heymans has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/69111 ) Change subject: mb/*/*: Remove AMD FAMILY15TN boards ...................................................................... Patch Set 1: (1 comment) Patchset: PS1: > And little to no attention given to those changes. Let's move ahead with this. Platforms can be added back if they comply: e.g. code added back with no boards, changes on top, boards added finally. -- To view, visit https://review.coreboot.org/c/coreboot/+/69111 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9efb5cb1149cc4cf6337c47af8a2f4c4b55f4368 Gerrit-Change-Number: 69111 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Elyes Haouas <ehaouas(a)noos.fr> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Michał Kopeć <michal.kopec(a)3mdeb.com> Gerrit-CC: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-CC: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-Attention: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Comment-Date: Mon, 07 Nov 2022 13:56:52 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: Paul Menzel <paulepanter(a)mailbox.org> Comment-In-Reply-To: Angel Pons <th3fanbus(a)gmail.com> Comment-In-Reply-To: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: comment

1 0

[L] Change in coreboot[master]: cpu/intel/model_206ax: Remove fake lapic device
by Arthur Heymans (Code Review) 07 Nov '22

07 Nov '22

Attention is currently required from: Arthur Heymans, Tristan Corrick, Angel Pons, Alexander Couzens, Evgeny Zinoviev, Patrick Rudolph. Arthur Heymans has uploaded a new patch set (#10) to the change originally created by Arthur Heymans. ( https://review.coreboot.org/c/coreboot/+/59316 ) Change subject: cpu/intel/model_206ax: Remove fake lapic device ...................................................................... cpu/intel/model_206ax: Remove fake lapic device Instead of using a fake lapic device hook up the cpu cluster to chip cpu/intel/model_206ax. The lapic deive is also not needed as the mp init will allocate it for the BSP at runtime. Change-Id: Id3b1c4ca027e2905535e137691c3e3e60417dbf3 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/cpu/intel/model_206ax/acpi.c M src/cpu/intel/model_206ax/chip.h M src/cpu/intel/model_206ax/model_206ax_init.c M src/mainboard/apple/macbookair4_2/devicetree.cb M src/mainboard/asrock/b75pro3-m/devicetree.cb M src/mainboard/asrock/h77pro4-m/devicetree.cb M src/mainboard/asus/h61-series/devicetree.cb M src/mainboard/asus/maximus_iv_gene-z/devicetree.cb M src/mainboard/asus/p8x7x-series/devicetree.cb M src/mainboard/biostar/th61-itx/devicetree.cb M src/mainboard/compulab/intense_pc/devicetree.cb M src/mainboard/dell/snb_ivb_workstations/variants/baseboard/devicetree.cb M src/mainboard/gigabyte/ga-b75m-d3h/devicetree.cb M src/mainboard/gigabyte/ga-h61m-series/devicetree.cb M src/mainboard/google/butterfly/devicetree.cb M src/mainboard/google/link/devicetree.cb M src/mainboard/google/parrot/devicetree.cb M src/mainboard/google/stout/devicetree.cb M src/mainboard/hp/compaq_8200_elite_sff/devicetree.cb M src/mainboard/hp/snb_ivb_laptops/devicetree.cb M src/mainboard/hp/z220_series/devicetree.cb M src/mainboard/intel/dcp847ske/devicetree.cb M src/mainboard/intel/emeraldlake2/devicetree.cb M src/mainboard/kontron/ktqm77/devicetree.cb M src/mainboard/lenovo/l520/devicetree.cb M src/mainboard/lenovo/s230u/devicetree.cb M src/mainboard/lenovo/t420/devicetree.cb M src/mainboard/lenovo/t420s/devicetree.cb M src/mainboard/lenovo/t430/devicetree.cb M src/mainboard/lenovo/t430s/devicetree.cb M src/mainboard/lenovo/t520/devicetree.cb M src/mainboard/lenovo/t530/devicetree.cb M src/mainboard/lenovo/x131e/devicetree.cb M src/mainboard/lenovo/x1_carbon_gen1/devicetree.cb M src/mainboard/lenovo/x220/devicetree.cb M src/mainboard/lenovo/x230/devicetree.cb M src/mainboard/msi/ms7707/devicetree.cb M src/mainboard/roda/rv11/variants/rv11/devicetree.cb M src/mainboard/roda/rv11/variants/rw11/devicetree.cb M src/mainboard/samsung/lumpy/devicetree.cb M src/mainboard/samsung/stumpy/devicetree.cb M src/mainboard/sapphire/pureplatinumh61/devicetree.cb M src/mainboard/supermicro/x9sae/devicetree.cb M src/mainboard/supermicro/x9scl/devicetree.cb M src/northbridge/intel/sandybridge/northbridge.c 45 files changed, 223 insertions(+), 429 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/16/59316/10 -- To view, visit https://review.coreboot.org/c/coreboot/+/59316 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id3b1c4ca027e2905535e137691c3e3e60417dbf3 Gerrit-Change-Number: 59316 Gerrit-PatchSet: 10 Gerrit-Owner: Arthur Heymans <arthur.heymans(a)9elements.com> Gerrit-Reviewer: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Evgeny Zinoviev <me(a)ch1p.io> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Tristan Corrick <tristan(a)corrick.kiwi> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Arthur Heymans <arthur.heymans(a)9elements.com> Gerrit-Attention: Tristan Corrick <tristan(a)corrick.kiwi> Gerrit-Attention: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Attention: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Attention: Evgeny Zinoviev <me(a)ch1p.io> Gerrit-Attention: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newpatchset

1 0

[L] Change in coreboot[master]: mb/*: Remove lapic from devicetree
by Sean Rhodes (Code Review) 07 Nov '22

07 Nov '22

Attention is currently required from: Felix Singer, Frans Hendriks, Patrick Rudolph, Jonathan Zhang, Jeremy Soller, Angel Pons, Arthur Heymans, Jonathon Hall, Michael Niewöhner, Piotr Król, Erik van den Bogaert, Tim Crawford, Tarun Tuli, Nico Huber, Michał Żygowski, Maxim Polyakov, Johnny Lin, Christian Walter, Morgan Jang, Werner Zeh, Tim Chu. Sean Rhodes has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/69303 ) Change subject: mb/*: Remove lapic from devicetree ...................................................................... Patch Set 2: Code-Review+1 -- To view, visit https://review.coreboot.org/c/coreboot/+/69303 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73 Gerrit-Change-Number: 69303 Gerrit-PatchSet: 2 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Christian Walter <christian.walter(a)9elements.com> Gerrit-Reviewer: Erik van den Bogaert <ebogaert(a)eltan.com> Gerrit-Reviewer: Felix Singer <felixsinger(a)posteo.net> Gerrit-Reviewer: Frans Hendriks <fhendriks(a)eltan.com> Gerrit-Reviewer: Jeremy Soller <jeremy(a)system76.com> Gerrit-Reviewer: Johnny Lin <Johnny_Lin(a)wiwynn.com> Gerrit-Reviewer: Jonathan Zhang <jonzhang(a)fb.com> Gerrit-Reviewer: Jonathon Hall <jonathon.hall(a)puri.sm> Gerrit-Reviewer: Maxim Polyakov <max.senia.poliak(a)gmail.com> Gerrit-Reviewer: Michael Niewöhner <foss(a)mniewoehner.de> Gerrit-Reviewer: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Reviewer: Morgan Jang <Morgan_Jang(a)wiwynn.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-Reviewer: Sean Rhodes <sean(a)starlabs.systems> Gerrit-Reviewer: Tarun Tuli <taruntuli(a)google.com> Gerrit-Reviewer: Tim Chu <Tim.Chu(a)quantatw.com> Gerrit-Reviewer: Tim Crawford <tcrawford(a)system76.com> Gerrit-Reviewer: Werner Zeh <werner.zeh(a)siemens.com> Gerrit-Attention: Felix Singer <felixsinger(a)posteo.net> Gerrit-Attention: Frans Hendriks <fhendriks(a)eltan.com> Gerrit-Attention: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Attention: Jonathan Zhang <jonzhang(a)fb.com> Gerrit-Attention: Jeremy Soller <jeremy(a)system76.com> Gerrit-Attention: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Attention: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Attention: Jonathon Hall <jonathon.hall(a)puri.sm> Gerrit-Attention: Michael Niewöhner <foss(a)mniewoehner.de> Gerrit-Attention: Piotr Król <piotr.krol(a)3mdeb.com> Gerrit-Attention: Erik van den Bogaert <ebogaert(a)eltan.com> Gerrit-Attention: Tim Crawford <tcrawford(a)system76.com> Gerrit-Attention: Tarun Tuli <taruntuli(a)google.com> Gerrit-Attention: Nico Huber <nico.h(a)gmx.de> Gerrit-Attention: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-Attention: Maxim Polyakov <max.senia.poliak(a)gmail.com> Gerrit-Attention: Johnny Lin <Johnny_Lin(a)wiwynn.com> Gerrit-Attention: Christian Walter <christian.walter(a)9elements.com> Gerrit-Attention: Morgan Jang <Morgan_Jang(a)wiwynn.com> Gerrit-Attention: Werner Zeh <werner.zeh(a)siemens.com> Gerrit-Attention: Tim Chu <Tim.Chu(a)quantatw.com> Gerrit-Comment-Date: Mon, 07 Nov 2022 13:20:55 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 0

[M] Change in coreboot[master]: nb/intel/sandybridge: Hook up CPU bus and PCI domain ops to devicetree
by build bot (Jenkins) (Code Review) 07 Nov '22

07 Nov '22

Attention is currently required from: Angel Pons, Alexander Couzens, Evgeny Zinoviev. build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/69291 ) Change subject: nb/intel/sandybridge: Hook up CPU bus and PCI domain ops to devicetree ...................................................................... Patch Set 7: (1 comment) Commit Message: Robot Comment from checkpatch (run ID jenkins-coreboot-checkpatch-162736): https://review.coreboot.org/c/coreboot/+/69291/comment/71dbfd7a_75e62295 PS7, Line 15: sed -i 's/domain 0 on/domain 0 on\n\t\tops sandybridge_pci_domain_ops/' \ Possible unwrapped commit description (prefer a maximum 72 chars per line) -- To view, visit https://review.coreboot.org/c/coreboot/+/69291 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I718d9dbc184c8bca38f452efea3202901018cb04 Gerrit-Change-Number: 69291 Gerrit-PatchSet: 7 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Evgeny Zinoviev <me(a)ch1p.io> Gerrit-CC: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Attention: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Attention: Evgeny Zinoviev <me(a)ch1p.io> Gerrit-Comment-Date: Mon, 07 Nov 2022 13:16:59 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

1 0

[M] Change in coreboot[master]: cpu/intel/haswell: Move chip_ops to cpu cluster
by Arthur Heymans (Code Review) 07 Nov '22

07 Nov '22

Attention is currently required from: Arthur Heymans, Raul Rangel, Tristan Corrick, Tim Wawrzynczak, Angel Pons, Jonathon Hall, Alexander Couzens, Patrick Rudolph. Arthur Heymans has uploaded a new patch set (#9) to the change originally created by Arthur Heymans. ( https://review.coreboot.org/c/coreboot/+/59314 ) Change subject: cpu/intel/haswell: Move chip_ops to cpu cluster ...................................................................... cpu/intel/haswell: Move chip_ops to cpu cluster The cpu cluster is always present and it's the proper device to contain the settings that need to be applied to all cpus. This makes it possible to remove the fake lapic from devicetrees. Change-Id: Ic449b2df8036e8c02b5559cca6b2e7479a70a786 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/cpu/intel/haswell/acpi.c M src/cpu/intel/haswell/chip.h M src/cpu/intel/haswell/haswell_init.c M src/mainboard/asrock/b85m_pro4/devicetree.cb M src/mainboard/asrock/h81m-hds/devicetree.cb M src/mainboard/google/auron/devicetree.cb M src/mainboard/google/auron/variants/buddy/overridetree.cb M src/mainboard/google/auron/variants/samus/overridetree.cb M src/mainboard/google/beltino/devicetree.cb M src/mainboard/google/jecht/devicetree.cb M src/mainboard/google/slippy/devicetree.cb M src/mainboard/hp/folio_9480m/devicetree.cb M src/mainboard/intel/baskingridge/devicetree.cb M src/mainboard/intel/wtm2/devicetree.cb M src/mainboard/lenovo/haswell/variants/t440p/devicetree.cb M src/mainboard/lenovo/haswell/variants/w541/devicetree.cb M src/mainboard/msi/h81m-p33/devicetree.cb M src/mainboard/purism/librem_bdw/devicetree.cb M src/mainboard/supermicro/x10slm-f/devicetree.cb M src/northbridge/intel/haswell/northbridge.c M src/soc/intel/broadwell/northbridge.c 21 files changed, 73 insertions(+), 138 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/14/59314/9 -- To view, visit https://review.coreboot.org/c/coreboot/+/59314 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ic449b2df8036e8c02b5559cca6b2e7479a70a786 Gerrit-Change-Number: 59314 Gerrit-PatchSet: 9 Gerrit-Owner: Arthur Heymans <arthur.heymans(a)9elements.com> Gerrit-Reviewer: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Jonathon Hall <jonathon.hall(a)puri.sm> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-Reviewer: Raul Rangel <rrangel(a)chromium.org> Gerrit-Reviewer: Tim Wawrzynczak <inforichland(a)gmail.com> Gerrit-Reviewer: Tristan Corrick <tristan(a)corrick.kiwi> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-CC: Paul Menzel <paulepanter(a)mailbox.org> Gerrit-Attention: Arthur Heymans <arthur.heymans(a)9elements.com> Gerrit-Attention: Raul Rangel <rrangel(a)chromium.org> Gerrit-Attention: Tristan Corrick <tristan(a)corrick.kiwi> Gerrit-Attention: Tim Wawrzynczak <inforichland(a)gmail.com> Gerrit-Attention: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Attention: Jonathon Hall <jonathon.hall(a)puri.sm> Gerrit-Attention: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Attention: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newpatchset

1 0

[M] Change in coreboot[master]: nb/intel/sandybridge: Hook up CPU bus and PCI domain ops to devicetree
by build bot (Jenkins) (Code Review) 07 Nov '22

07 Nov '22

Attention is currently required from: Angel Pons, Alexander Couzens, Evgeny Zinoviev. build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/69291 ) Change subject: nb/intel/sandybridge: Hook up CPU bus and PCI domain ops to devicetree ...................................................................... Patch Set 6: (1 comment) Commit Message: Robot Comment from checkpatch (run ID jenkins-coreboot-checkpatch-162722): https://review.coreboot.org/c/coreboot/+/69291/comment/20a747da_83ff8b03 PS6, Line 15: sed -i 's/domain 0 on/domain 0 on\n\t\tops sandybridge_pci_domain_ops/' \ Possible unwrapped commit description (prefer a maximum 72 chars per line) -- To view, visit https://review.coreboot.org/c/coreboot/+/69291 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I718d9dbc184c8bca38f452efea3202901018cb04 Gerrit-Change-Number: 69291 Gerrit-PatchSet: 6 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Evgeny Zinoviev <me(a)ch1p.io> Gerrit-CC: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Attention: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Attention: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Attention: Evgeny Zinoviev <me(a)ch1p.io> Gerrit-Comment-Date: Mon, 07 Nov 2022 13:11:46 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit November 2022