coreboot-gerrit August 2019

coreboot-gerrit@coreboot.org

1 participants
1942 discussions

Change in ...coreboot[master]: nb/sandybridge/raminit_common.c: Remove variable set but not used
by HAOUAS Elyes (Code Review) 13 Dec '19

13 Dec '19

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33005 Change subject: nb/sandybridge/raminit_common.c: Remove variable set but not used ...................................................................... nb/sandybridge/raminit_common.c: Remove variable set but not used Change-Id: I109353775fe4ecce6a05ef88781939243f398d17 Signed-off-by: Elyes HAOUAS <ehaouas(a)noos.fr> --- M src/northbridge/intel/sandybridge/raminit_common.c 1 file changed, 9 insertions(+), 6 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/05/33005/1 diff --git a/src/northbridge/intel/sandybridge/raminit_common.c b/src/northbridge/intel/sandybridge/raminit_common.c index 5347c5c..b8ad3c0 100644 --- a/src/northbridge/intel/sandybridge/raminit_common.c +++ b/src/northbridge/intel/sandybridge/raminit_common.c @@ -1824,7 +1824,7 @@ static void adjust_high_timB(ramctr_timing * ctrl) { - int channel, slotrank, lane, old; + int channel, slotrank, lane; MCHBAR32(0x3400) = 0x200; FOR_ALL_POPULATED_CHANNELS { fill_pattern1(ctrl, channel); @@ -1898,15 +1898,18 @@ 0x100 * channel + 4); res |= ((u64) MCHBAR32(lane_registers[lane] + 0x100 * channel + 8)) << 32; - old = ctrl->timings[channel][slotrank].lanes[lane].timB; - ctrl->timings[channel][slotrank].lanes[lane].timB += - get_timB_high_adjust(res) * 64; printram("High adjust %d:%016llx\n", lane, res); - printram("Bval+: %d, %d, %d, %x -> %x\n", channel, - slotrank, lane, old, + printram("Bval+: %d, %d, %d, %x", channel, + slotrank, lane, ctrl->timings[channel][slotrank].lanes[lane]. timB); + ctrl->timings[channel][slotrank].lanes[lane].timB += + get_timB_high_adjust(res) * 64; + printram(" -> %x\n", + ctrl->timings[channel][slotrank].lanes[lane]. + timB); + } } MCHBAR32(0x3400) = 0; -- To view, visit https://review.coreboot.org/c/coreboot/+/33005 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I109353775fe4ecce6a05ef88781939243f398d17 Gerrit-Change-Number: 33005 Gerrit-PatchSet: 1 Gerrit-Owner: HAOUAS Elyes <ehaouas(a)noos.fr> Gerrit-MessageType: newchange

2 8

Change in coreboot[master]: [WIP] AGESA, binaryPI: Remove generic device for SPD eeproms
by Kyösti Mälkki (Code Review) 12 Dec '19

12 Dec '19

Kyösti Mälkki has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35102 ) Change subject: [WIP] AGESA, binaryPI: Remove generic device for SPD eeproms ...................................................................... [WIP] AGESA, binaryPI: Remove generic device for SPD eeproms Change-Id: Ieab695022d0dd2f2671f9058db97bdd6fb29a10d Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- M src/mainboard/amd/bettong/devicetree.cb M src/mainboard/amd/gardenia/devicetree.cb M src/mainboard/amd/inagua/devicetree.cb M src/mainboard/amd/lamar/devicetree.cb M src/mainboard/amd/olivehill/devicetree.cb M src/mainboard/amd/olivehillplus/devicetree.cb M src/mainboard/amd/parmer/devicetree.cb M src/mainboard/amd/persimmon/devicetree.cb M src/mainboard/amd/thatcher/devicetree.cb M src/mainboard/amd/torpedo/devicetree.cb M src/mainboard/asrock/e350m1/devicetree.cb M src/mainboard/asrock/imb-a180/devicetree.cb M src/mainboard/asus/am1i-a/devicetree.cb M src/mainboard/asus/f2a85-m/devicetree_f2a85-m.cb M src/mainboard/asus/f2a85-m/devicetree_f2a85-m_le.cb M src/mainboard/asus/f2a85-m/devicetree_f2a85-m_pro.cb M src/mainboard/biostar/am1ml/devicetree.cb M src/mainboard/elmex/pcm205400/devicetree.cb M src/mainboard/hp/abm/devicetree.cb M src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb M src/mainboard/jetway/nf81-t56n-lf/devicetree.cb M src/mainboard/lenovo/g505s/devicetree.cb M src/mainboard/lippert/frontrunner-af/devicetree.cb M src/mainboard/lippert/toucan-af/devicetree.cb M src/mainboard/msi/ms7721/devicetree.cb 25 files changed, 0 insertions(+), 156 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/35102/1 diff --git a/src/mainboard/amd/bettong/devicetree.cb b/src/mainboard/amd/bettong/devicetree.cb index 84aaf41..e318b6d 100644 --- a/src/mainboard/amd/bettong/devicetree.cb +++ b/src/mainboard/amd/bettong/devicetree.cb @@ -43,12 +43,6 @@ device pci 11.0 on end # SATA device pci 12.0 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM #device pci 14.2 on end # HDA 0x4383 device pci 14.3 on end # LPC 0x439d diff --git a/src/mainboard/amd/gardenia/devicetree.cb b/src/mainboard/amd/gardenia/devicetree.cb index e9946ad..beee845 100644 --- a/src/mainboard/amd/gardenia/devicetree.cb +++ b/src/mainboard/amd/gardenia/devicetree.cb @@ -41,9 +41,6 @@ device pci 11.0 on end # SATA device pci 12.0 on end # EHCI device pci 14.0 on # SM - chip drivers/generic/generic # dimm 0-0-0 - device i2c 51 on end - end end # SM device pci 14.3 on end # LPC 0x790e device pci 14.7 on end # SD diff --git a/src/mainboard/amd/inagua/devicetree.cb b/src/mainboard/amd/inagua/devicetree.cb index 578c654..cc28124 100644 --- a/src/mainboard/amd/inagua/devicetree.cb +++ b/src/mainboard/amd/inagua/devicetree.cb @@ -38,12 +38,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/amd/lamar/devicetree.cb b/src/mainboard/amd/lamar/devicetree.cb index d7f3f05..e57a6c6 100644 --- a/src/mainboard/amd/lamar/devicetree.cb +++ b/src/mainboard/amd/lamar/devicetree.cb @@ -54,18 +54,6 @@ device pci 13.0 on end # 0x7807 USB OHCI device pci 13.2 on end # 0x7808 USB EHCI device pci 14.0 on # 0x780B SMBus - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end end # SM device pci 14.1 on end # 0x780C IDE device pci 14.2 on end # 0x780D HDA diff --git a/src/mainboard/amd/olivehill/devicetree.cb b/src/mainboard/amd/olivehill/devicetree.cb index bf8d476..a7933ce 100644 --- a/src/mainboard/amd/olivehill/devicetree.cb +++ b/src/mainboard/amd/olivehill/devicetree.cb @@ -41,12 +41,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.2 on end # HDA 0x4383 device pci 14.3 on end # LPC 0x439d diff --git a/src/mainboard/amd/olivehillplus/devicetree.cb b/src/mainboard/amd/olivehillplus/devicetree.cb index 430b17b..4b47642d 100644 --- a/src/mainboard/amd/olivehillplus/devicetree.cb +++ b/src/mainboard/amd/olivehillplus/devicetree.cb @@ -42,12 +42,6 @@ device pci 12.0 on end # EHCI #0 device pci 13.0 on end # EHCI #1 device pci 14.0 on # SMBus - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SMbus device pci 14.2 on end # HDA 0x4383 device pci 14.3 on end # LPC 0x439d diff --git a/src/mainboard/amd/parmer/devicetree.cb b/src/mainboard/amd/parmer/devicetree.cb index e619def..7e0fc2c 100644 --- a/src/mainboard/amd/parmer/devicetree.cb +++ b/src/mainboard/amd/parmer/devicetree.cb @@ -44,12 +44,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/amd/persimmon/devicetree.cb b/src/mainboard/amd/persimmon/devicetree.cb index 323e7f2..40ea282 100644 --- a/src/mainboard/amd/persimmon/devicetree.cb +++ b/src/mainboard/amd/persimmon/devicetree.cb @@ -37,12 +37,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/amd/thatcher/devicetree.cb b/src/mainboard/amd/thatcher/devicetree.cb index 4ae1ba9..a55fa25 100644 --- a/src/mainboard/amd/thatcher/devicetree.cb +++ b/src/mainboard/amd/thatcher/devicetree.cb @@ -44,12 +44,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/amd/torpedo/devicetree.cb b/src/mainboard/amd/torpedo/devicetree.cb index 2adfb27..00923ea 100644 --- a/src/mainboard/amd/torpedo/devicetree.cb +++ b/src/mainboard/amd/torpedo/devicetree.cb @@ -42,12 +42,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # IDE device pci 14.2 on end # HDA diff --git a/src/mainboard/asrock/e350m1/devicetree.cb b/src/mainboard/asrock/e350m1/devicetree.cb index e374c41..5d368fa 100644 --- a/src/mainboard/asrock/e350m1/devicetree.cb +++ b/src/mainboard/asrock/e350m1/devicetree.cb @@ -39,12 +39,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/asrock/imb-a180/devicetree.cb b/src/mainboard/asrock/imb-a180/devicetree.cb index 2c4a4aa..3ade19b 100644 --- a/src/mainboard/asrock/imb-a180/devicetree.cb +++ b/src/mainboard/asrock/imb-a180/devicetree.cb @@ -42,12 +42,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.2 on end # HDA 0x4383 device pci 14.3 on diff --git a/src/mainboard/asus/am1i-a/devicetree.cb b/src/mainboard/asus/am1i-a/devicetree.cb index 53114c1..763761a 100644 --- a/src/mainboard/asus/am1i-a/devicetree.cb +++ b/src/mainboard/asus/am1i-a/devicetree.cb @@ -43,12 +43,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x439d diff --git a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m.cb b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m.cb index 349a845..c95fe84 100644 --- a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m.cb +++ b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m.cb @@ -47,12 +47,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_le.cb b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_le.cb index af0e4cc..3e39ef3 100644 --- a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_le.cb +++ b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_le.cb @@ -47,12 +47,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_pro.cb b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_pro.cb index 238ab51..e261505 100644 --- a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_pro.cb +++ b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_pro.cb @@ -38,18 +38,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 52 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 2 - device i2c 51 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 3 - device i2c 53 on end # 7-bit SPD address - end end # SM device pci 14.1 off end # unused device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/biostar/am1ml/devicetree.cb b/src/mainboard/biostar/am1ml/devicetree.cb index 400653d..e6adc0a 100644 --- a/src/mainboard/biostar/am1ml/devicetree.cb +++ b/src/mainboard/biostar/am1ml/devicetree.cb @@ -42,12 +42,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # there is no legacy ide device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/elmex/pcm205400/devicetree.cb b/src/mainboard/elmex/pcm205400/devicetree.cb index 405f3e0..d11529b 100644 --- a/src/mainboard/elmex/pcm205400/devicetree.cb +++ b/src/mainboard/elmex/pcm205400/devicetree.cb @@ -37,12 +37,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 off end # HDA 0x4383 diff --git a/src/mainboard/hp/abm/devicetree.cb b/src/mainboard/hp/abm/devicetree.cb index c7a7510..2786f78 100644 --- a/src/mainboard/hp/abm/devicetree.cb +++ b/src/mainboard/hp/abm/devicetree.cb @@ -41,9 +41,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end end # SM device pci 14.2 off end # HDA 0x4383 device pci 14.3 on # LPC 0x439d diff --git a/src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb b/src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb index ad59974..35ccca7 100644 --- a/src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb +++ b/src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb @@ -41,12 +41,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x439d diff --git a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb index 6289438..faed1c5 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb +++ b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb @@ -38,12 +38,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/lenovo/g505s/devicetree.cb b/src/mainboard/lenovo/g505s/devicetree.cb index 99f42d6..5be9111 100644 --- a/src/mainboard/lenovo/g505s/devicetree.cb +++ b/src/mainboard/lenovo/g505s/devicetree.cb @@ -45,12 +45,6 @@ device pci 13.0 on end # FCH USB OHCI Controller device pci 13.2 on end # FCH USB EHCI Controller device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.2 on end # FCH Azalia Controller device pci 14.3 on # FCH LPC Bridge [1022:780e] diff --git a/src/mainboard/lippert/frontrunner-af/devicetree.cb b/src/mainboard/lippert/frontrunner-af/devicetree.cb index b72059a..5e84fcb 100644 --- a/src/mainboard/lippert/frontrunner-af/devicetree.cb +++ b/src/mainboard/lippert/frontrunner-af/devicetree.cb @@ -37,12 +37,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 off end - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/lippert/toucan-af/devicetree.cb b/src/mainboard/lippert/toucan-af/devicetree.cb index cb9aa8e..25d84db 100644 --- a/src/mainboard/lippert/toucan-af/devicetree.cb +++ b/src/mainboard/lippert/toucan-af/devicetree.cb @@ -38,12 +38,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 off end - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/msi/ms7721/devicetree.cb b/src/mainboard/msi/ms7721/devicetree.cb index d3991f1..1c73404 100644 --- a/src/mainboard/msi/ms7721/devicetree.cb +++ b/src/mainboard/msi/ms7721/devicetree.cb @@ -46,12 +46,6 @@ device pci 13.0 on end # USB OHCI device pci 13.2 on end # USB EHCI device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # Azalia (Audio) -- To view, visit https://review.coreboot.org/c/coreboot/+/35102 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ieab695022d0dd2f2671f9058db97bdd6fb29a10d Gerrit-Change-Number: 35102 Gerrit-PatchSet: 1 Gerrit-Owner: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Gerrit-Reviewer: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Reviewer: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

4 10

Change in coreboot[master]: [WIP]drivers/aspeed: Add AST2500 support
by Patrick Rudolph (Code Review) 12 Dec '19

12 Dec '19

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34793 ) Change subject: [WIP]drivers/aspeed: Add AST2500 support ...................................................................... [WIP]drivers/aspeed: Add AST2500 support Untested on AST2500. Code for AST2400 still works. TODO: Adjust Copyright. Copy code from GNU/Linux kernel to coreboot to add AST2500 support. Change-Id: I25bd34dd52a0acd3e04fc5818e011215ef907fad Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/drivers/aspeed/common/ast_dp501.c M src/drivers/aspeed/common/ast_dram_tables.h M src/drivers/aspeed/common/ast_drv.h M src/drivers/aspeed/common/ast_post.c M src/drivers/aspeed/common/ast_tables.h 5 files changed, 656 insertions(+), 170 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/93/34793/1 diff --git a/src/drivers/aspeed/common/ast_dp501.c b/src/drivers/aspeed/common/ast_dp501.c index 2e8b897..4b867c0 100644 --- a/src/drivers/aspeed/common/ast_dp501.c +++ b/src/drivers/aspeed/common/ast_dp501.c @@ -145,7 +145,7 @@ return false; } -bool ast_launch_m68k(struct drm_device *dev) +static bool ast_launch_m68k(struct drm_device *dev) { struct ast_private *ast = dev->dev_private; u32 i, data, len = 0; @@ -159,7 +159,10 @@ if (ast->dp501_fw_addr) { fw_addr = ast->dp501_fw_addr; len = 32*1024; - } else if (ast->dp501_fw) { + } else { + if (!ast->dp501_fw) + return false; + fw_addr = (u8 *)ast->dp501_fw->data; len = ast->dp501_fw->size; } @@ -224,11 +227,7 @@ /* Read Link Capability */ offset = 0xf014; - data = ast_mindwm(ast, boot_address + offset); - linkcap[0] = (data & 0xff000000) >> 24; - linkcap[1] = (data & 0x00ff0000) >> 16; - linkcap[2] = (data & 0x0000ff00) >> 8; - linkcap[3] = (data & 0x000000ff); + *(u32 *)linkcap = ast_mindwm(ast, boot_address + offset); if (linkcap[2] == 0) { linkrate = linkcap[0]; linklanes = linkcap[1]; diff --git a/src/drivers/aspeed/common/ast_dram_tables.h b/src/drivers/aspeed/common/ast_dram_tables.h index 1d46ca6..986b2c9 100644 --- a/src/drivers/aspeed/common/ast_dram_tables.h +++ b/src/drivers/aspeed/common/ast_dram_tables.h @@ -158,4 +158,66 @@ { 0xffff, 0xffffffff }, }; +/* + * AST2500 DRAM settings modules + */ +#define REGTBL_NUM 17 +#define REGIDX_010 0 +#define REGIDX_014 1 +#define REGIDX_018 2 +#define REGIDX_020 3 +#define REGIDX_024 4 +#define REGIDX_02C 5 +#define REGIDX_030 6 +#define REGIDX_214 7 +#define REGIDX_2E0 8 +#define REGIDX_2E4 9 +#define REGIDX_2E8 10 +#define REGIDX_2EC 11 +#define REGIDX_2F0 12 +#define REGIDX_2F4 13 +#define REGIDX_2F8 14 +#define REGIDX_RFC 15 +#define REGIDX_PLL 16 + +static const u32 ast2500_ddr3_1600_timing_table[REGTBL_NUM] = { + 0x64604D38, /* 0x010 */ + 0x29690599, /* 0x014 */ + 0x00000300, /* 0x018 */ + 0x00000000, /* 0x020 */ + 0x00000000, /* 0x024 */ + 0x02181E70, /* 0x02C */ + 0x00000040, /* 0x030 */ + 0x00000024, /* 0x214 */ + 0x02001300, /* 0x2E0 */ + 0x0E0000A0, /* 0x2E4 */ + 0x000E001B, /* 0x2E8 */ + 0x35B8C105, /* 0x2EC */ + 0x08090408, /* 0x2F0 */ + 0x9B000800, /* 0x2F4 */ + 0x0E400A00, /* 0x2F8 */ + 0x9971452F, /* tRFC */ + 0x000071C1 /* PLL */ + }; + + static const u32 ast2500_ddr4_1600_timing_table[REGTBL_NUM] = { + 0x63604E37, /* 0x010 */ + 0xE97AFA99, /* 0x014 */ + 0x00019000, /* 0x018 */ + 0x08000000, /* 0x020 */ + 0x00000400, /* 0x024 */ + 0x00000410, /* 0x02C */ + 0x00000101, /* 0x030 */ + 0x00000024, /* 0x214 */ + 0x03002900, /* 0x2E0 */ + 0x0E0000A0, /* 0x2E4 */ + 0x000E001C, /* 0x2E8 */ + 0x35B8C106, /* 0x2EC */ + 0x08080607, /* 0x2F0 */ + 0x9B000900, /* 0x2F4 */ + 0x0E400A00, /* 0x2F8 */ + 0x99714545, /* tRFC */ + 0x000071C1 /* PLL */ + }; + #endif diff --git a/src/drivers/aspeed/common/ast_drv.h b/src/drivers/aspeed/common/ast_drv.h index 53640f1..e2904c2 100644 --- a/src/drivers/aspeed/common/ast_drv.h +++ b/src/drivers/aspeed/common/ast_drv.h @@ -44,6 +44,7 @@ AST2150, AST2300, AST2400, + AST2500, AST1180, }; @@ -60,6 +61,7 @@ #define AST_DRAM_1Gx32 3 #define AST_DRAM_2Gx16 6 #define AST_DRAM_4Gx16 7 +#define AST_DRAM_8Gx16 8 struct ast_fbdev; @@ -213,11 +215,10 @@ u32 ast_mindwm(struct ast_private *ast, u32 r); void ast_moutdwm(struct ast_private *ast, u32 r, u32 v); /* ast dp501 */ -int ast_load_dp501_microcode(struct drm_device *dev); void ast_set_dp501_video_output(struct drm_device *dev, u8 mode); -bool ast_launch_m68k(struct drm_device *dev); bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size); bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata); u8 ast_get_dp501_max_clk(struct drm_device *dev); void ast_init_3rdtx(struct drm_device *dev); +void ast_release_firmware(struct drm_device *dev); #endif diff --git a/src/drivers/aspeed/common/ast_post.c b/src/drivers/aspeed/common/ast_post.c index 5f935b9..dc825b5 100644 --- a/src/drivers/aspeed/common/ast_post.c +++ b/src/drivers/aspeed/common/ast_post.c @@ -34,7 +34,8 @@ #include "ast_drv.h" #include "ast_dram_tables.h" -static void ast_init_dram_2300(struct drm_device *dev); +static void ast_post_chip_2300(struct drm_device *dev); +static void ast_post_chip_2500(struct drm_device *dev); void ast_enable_vga(struct drm_device *dev) { @@ -61,13 +62,9 @@ /* TODO 1180 */ } else { ch = ast_io_read8(ast, AST_IO_VGA_ENABLE_PORT); - if (ch) { - ast_open_key(ast); - ch = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xff); - return ch & 0x04; - } + return !!(ch & 0x01); } - return 0; + return false; } static const u8 extreginfo[] = { 0x0f, 0x04, 0x1c, 0xff }; @@ -86,10 +83,11 @@ uint8_t revision = data & 0xff; /* reset scratch */ - for (i = 0x81; i <= 0x8f; i++) + for (i = 0x81; i <= 0x9f; i++) ast_set_index_reg(ast, AST_IO_CRTC_PORT, i, 0x00); - if (ast->chip == AST2300 || ast->chip == AST2400) { + if (ast->chip == AST2300 || ast->chip == AST2400 || + ast->chip == AST2500) { if (revision >= 0x20) ext_reg_info = extreginfo_ast2300; else @@ -113,7 +111,8 @@ /* Enable RAMDAC for A1 */ reg = 0x04; - if (ast->chip == AST2300 || ast->chip == AST2400) + if (ast->chip == AST2300 || ast->chip == AST2400 || + ast->chip == AST2500) reg |= 0x20; ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xff, reg); } @@ -394,12 +393,14 @@ pci_write_config_dword(ast->dev->pdev, 0x04, reg); ast_enable_vga(dev); - ast_enable_mmio(dev); ast_open_key(ast); + ast_enable_mmio(dev); ast_set_def_ext_reg(dev); - if (ast->chip == AST2300 || ast->chip == AST2400) - ast_init_dram_2300(dev); + if (ast->chip == AST2500) + ast_post_chip_2500(dev); + else if (ast->chip == AST2300 || ast->chip == AST2400) + ast_post_chip_2300(dev); else ast_init_dram_reg(dev); @@ -459,87 +460,72 @@ 0x7C61D253 }; -static int mmc_test_burst(struct ast_private *ast, u32 datagen) +static bool mmc_test(struct ast_private *ast, u32 datagen, u8 test_ctl) { u32 data, timeout; ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - ast_moutdwm(ast, 0x1e6e0070, 0x000000c1 | (datagen << 3)); - timeout = 0; - do { - data = ast_mindwm(ast, 0x1e6e0070) & 0x3000; - if (data & 0x2000) { - return 0; - } - if (++timeout > TIMEOUT) { - ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - return 0; - } - } while (!data); - ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - return 1; -} - -static int mmc_test_burst2(struct ast_private *ast, u32 datagen) -{ - u32 data, timeout; - - ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - ast_moutdwm(ast, 0x1e6e0070, 0x00000041 | (datagen << 3)); - timeout = 0; - do { - data = ast_mindwm(ast, 0x1e6e0070) & 0x1000; - if (++timeout > TIMEOUT) { - ast_moutdwm(ast, 0x1e6e0070, 0x0); - return -1; - } - } while (!data); - data = ast_mindwm(ast, 0x1e6e0078); - data = (data | (data >> 16)) & 0xffff; - ast_moutdwm(ast, 0x1e6e0070, 0x0); - return data; -} - -static int mmc_test_single(struct ast_private *ast, u32 datagen) -{ - u32 data, timeout; - - ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - ast_moutdwm(ast, 0x1e6e0070, 0x000000c5 | (datagen << 3)); + ast_moutdwm(ast, 0x1e6e0070, (datagen << 3) | test_ctl); timeout = 0; do { data = ast_mindwm(ast, 0x1e6e0070) & 0x3000; if (data & 0x2000) - return 0; + return false; if (++timeout > TIMEOUT) { - ast_moutdwm(ast, 0x1e6e0070, 0x0); - return 0; + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); + return false; } } while (!data); ast_moutdwm(ast, 0x1e6e0070, 0x0); - return 1; + return true; } -static int mmc_test_single2(struct ast_private *ast, u32 datagen) +static u32 mmc_test2(struct ast_private *ast, u32 datagen, u8 test_ctl) { u32 data, timeout; ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - ast_moutdwm(ast, 0x1e6e0070, 0x00000005 | (datagen << 3)); + ast_moutdwm(ast, 0x1e6e0070, (datagen << 3) | test_ctl); timeout = 0; do { data = ast_mindwm(ast, 0x1e6e0070) & 0x1000; if (++timeout > TIMEOUT) { ast_moutdwm(ast, 0x1e6e0070, 0x0); - return -1; + return 0xffffffff; } } while (!data); data = ast_mindwm(ast, 0x1e6e0078); data = (data | (data >> 16)) & 0xffff; - ast_moutdwm(ast, 0x1e6e0070, 0x0); + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); return data; } + +static bool mmc_test_burst(struct ast_private *ast, u32 datagen) +{ + return mmc_test(ast, datagen, 0xc1); +} + +static u32 mmc_test_burst2(struct ast_private *ast, u32 datagen) +{ + return mmc_test2(ast, datagen, 0x41); +} + +static bool mmc_test_single(struct ast_private *ast, u32 datagen) +{ + return mmc_test(ast, datagen, 0xc5); +} + +static u32 mmc_test_single2(struct ast_private *ast, u32 datagen) +{ + return mmc_test2(ast, datagen, 0x05); +} + +static bool mmc_test_single_2500(struct ast_private *ast, u32 datagen) +{ + return mmc_test(ast, datagen, 0x85); +} + static int cbr_test(struct ast_private *ast) { u32 data; @@ -615,16 +601,16 @@ return data2; } -static u32 cbr_test3(struct ast_private *ast) +static bool cbr_test3(struct ast_private *ast) { if (!mmc_test_burst(ast, 0)) - return 0; + return false; if (!mmc_test_single(ast, 0)) - return 0; - return 1; + return false; + return true; } -static u32 cbr_scan3(struct ast_private *ast) +static bool cbr_scan3(struct ast_private *ast) { u32 patcnt, loop; @@ -635,9 +621,9 @@ break; } if (loop == 2) - return 0; + return false; } - return 1; + return true; } static bool finetuneDQI_L(struct ast_private *ast, struct ast2300_dram_param *param) @@ -1661,7 +1647,7 @@ } -static void ast_init_dram_2300(struct drm_device *dev) +static void ast_post_chip_2300(struct drm_device *dev) { struct ast_private *ast = dev->dev_private; struct ast2300_dram_param param; @@ -1746,11 +1732,409 @@ } /* wait ready */ - timeout = 0; do { reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); - timeout++; - } while (((reg & 0x40) == 0) && (timeout < COREBOOT_AST_FAILOVER_TIMEOUT)); - if (timeout >= COREBOOT_AST_FAILOVER_TIMEOUT) - dev_err(dev->pdev, "Timeout while waiting for register\n"); + } while ((reg & 0x40) == 0); +} + +static bool cbr_test_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E6E0074, 0x0000FFFF); + ast_moutdwm(ast, 0x1E6E007C, 0xFF00FF00); + if (!mmc_test_burst(ast, 0)) + return false; + if (!mmc_test_single_2500(ast, 0)) + return false; + return true; +} + +static bool ddr_test_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E6E0074, 0x0000FFFF); + ast_moutdwm(ast, 0x1E6E007C, 0xFF00FF00); + if (!mmc_test_burst(ast, 0)) + return false; + if (!mmc_test_burst(ast, 1)) + return false; + if (!mmc_test_burst(ast, 2)) + return false; + if (!mmc_test_burst(ast, 3)) + return false; + if (!mmc_test_single_2500(ast, 0)) + return false; + return true; +} + +static void ddr_init_common_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E6E0034, 0x00020080); + ast_moutdwm(ast, 0x1E6E0008, 0x2003000F); + ast_moutdwm(ast, 0x1E6E0038, 0x00000FFF); + ast_moutdwm(ast, 0x1E6E0040, 0x88448844); + ast_moutdwm(ast, 0x1E6E0044, 0x24422288); + ast_moutdwm(ast, 0x1E6E0048, 0x22222222); + ast_moutdwm(ast, 0x1E6E004C, 0x22222222); + ast_moutdwm(ast, 0x1E6E0050, 0x80000000); + ast_moutdwm(ast, 0x1E6E0208, 0x00000000); + ast_moutdwm(ast, 0x1E6E0218, 0x00000000); + ast_moutdwm(ast, 0x1E6E0220, 0x00000000); + ast_moutdwm(ast, 0x1E6E0228, 0x00000000); + ast_moutdwm(ast, 0x1E6E0230, 0x00000000); + ast_moutdwm(ast, 0x1E6E02A8, 0x00000000); + ast_moutdwm(ast, 0x1E6E02B0, 0x00000000); + ast_moutdwm(ast, 0x1E6E0240, 0x86000000); + ast_moutdwm(ast, 0x1E6E0244, 0x00008600); + ast_moutdwm(ast, 0x1E6E0248, 0x80000000); + ast_moutdwm(ast, 0x1E6E024C, 0x80808080); +} + +static void ddr_phy_init_2500(struct ast_private *ast) +{ + u32 data, pass, timecnt; + + pass = 0; + ast_moutdwm(ast, 0x1E6E0060, 0x00000005); + while (!pass) { + for (timecnt = 0; timecnt < TIMEOUT; timecnt++) { + data = ast_mindwm(ast, 0x1E6E0060) & 0x1; + if (!data) + break; + } + if (timecnt != TIMEOUT) { + data = ast_mindwm(ast, 0x1E6E0300) & 0x000A0000; + if (!data) + pass = 1; + } + if (!pass) { + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + udelay(10); /* delay 10 us */ + ast_moutdwm(ast, 0x1E6E0060, 0x00000005); + } + } + + ast_moutdwm(ast, 0x1E6E0060, 0x00000006); +} + +/* + * Check DRAM Size + * 1Gb : 0x80000000 ~ 0x87FFFFFF + * 2Gb : 0x80000000 ~ 0x8FFFFFFF + * 4Gb : 0x80000000 ~ 0x9FFFFFFF + * 8Gb : 0x80000000 ~ 0xBFFFFFFF + */ +static void check_dram_size_2500(struct ast_private *ast, u32 tRFC) +{ + u32 reg_04, reg_14; + + reg_04 = ast_mindwm(ast, 0x1E6E0004) & 0xfffffffc; + reg_14 = ast_mindwm(ast, 0x1E6E0014) & 0xffffff00; + + ast_moutdwm(ast, 0xA0100000, 0x41424344); + ast_moutdwm(ast, 0x90100000, 0x35363738); + ast_moutdwm(ast, 0x88100000, 0x292A2B2C); + ast_moutdwm(ast, 0x80100000, 0x1D1E1F10); + + /* Check 8Gbit */ + if (ast_mindwm(ast, 0xA0100000) == 0x41424344) { + reg_04 |= 0x03; + reg_14 |= (tRFC >> 24) & 0xFF; + /* Check 4Gbit */ + } else if (ast_mindwm(ast, 0x90100000) == 0x35363738) { + reg_04 |= 0x02; + reg_14 |= (tRFC >> 16) & 0xFF; + /* Check 2Gbit */ + } else if (ast_mindwm(ast, 0x88100000) == 0x292A2B2C) { + reg_04 |= 0x01; + reg_14 |= (tRFC >> 8) & 0xFF; + } else { + reg_14 |= tRFC & 0xFF; + } + ast_moutdwm(ast, 0x1E6E0004, reg_04); + ast_moutdwm(ast, 0x1E6E0014, reg_14); +} + +static void enable_cache_2500(struct ast_private *ast) +{ + u32 reg_04, data; + + reg_04 = ast_mindwm(ast, 0x1E6E0004); + ast_moutdwm(ast, 0x1E6E0004, reg_04 | 0x1000); + + do + data = ast_mindwm(ast, 0x1E6E0004); + while (!(data & 0x80000)); + ast_moutdwm(ast, 0x1E6E0004, reg_04 | 0x400); +} + +static void set_mpll_2500(struct ast_private *ast) +{ + u32 addr, data, param; + + /* Reset MMC */ + ast_moutdwm(ast, 0x1E6E0000, 0xFC600309); + ast_moutdwm(ast, 0x1E6E0034, 0x00020080); + for (addr = 0x1e6e0004; addr < 0x1e6e0090;) { + ast_moutdwm(ast, addr, 0x0); + addr += 4; + } + ast_moutdwm(ast, 0x1E6E0034, 0x00020000); + + ast_moutdwm(ast, 0x1E6E2000, 0x1688A8A8); + data = ast_mindwm(ast, 0x1E6E2070) & 0x00800000; + if (data) { + /* CLKIN = 25MHz */ + param = 0x930023E0; + ast_moutdwm(ast, 0x1E6E2160, 0x00011320); + } else { + /* CLKIN = 24MHz */ + param = 0x93002400; + } + ast_moutdwm(ast, 0x1E6E2020, param); + udelay(100); +} + +static void reset_mmc_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E78505C, 0x00000004); + ast_moutdwm(ast, 0x1E785044, 0x00000001); + ast_moutdwm(ast, 0x1E785048, 0x00004755); + ast_moutdwm(ast, 0x1E78504C, 0x00000013); + mdelay(100); + ast_moutdwm(ast, 0x1E785054, 0x00000077); + ast_moutdwm(ast, 0x1E6E0000, 0xFC600309); +} + +static void ddr3_init_2500(struct ast_private *ast, const u32 *ddr_table) +{ + + ast_moutdwm(ast, 0x1E6E0004, 0x00000303); + ast_moutdwm(ast, 0x1E6E0010, ddr_table[REGIDX_010]); + ast_moutdwm(ast, 0x1E6E0014, ddr_table[REGIDX_014]); + ast_moutdwm(ast, 0x1E6E0018, ddr_table[REGIDX_018]); + ast_moutdwm(ast, 0x1E6E0020, ddr_table[REGIDX_020]); /* MODEREG4/6 */ + ast_moutdwm(ast, 0x1E6E0024, ddr_table[REGIDX_024]); /* MODEREG5 */ + ast_moutdwm(ast, 0x1E6E002C, ddr_table[REGIDX_02C] | 0x100); /* MODEREG0/2 */ + ast_moutdwm(ast, 0x1E6E0030, ddr_table[REGIDX_030]); /* MODEREG1/3 */ + + /* DDR PHY Setting */ + ast_moutdwm(ast, 0x1E6E0200, 0x02492AAE); + ast_moutdwm(ast, 0x1E6E0204, 0x00001001); + ast_moutdwm(ast, 0x1E6E020C, 0x55E00B0B); + ast_moutdwm(ast, 0x1E6E0210, 0x20000000); + ast_moutdwm(ast, 0x1E6E0214, ddr_table[REGIDX_214]); + ast_moutdwm(ast, 0x1E6E02E0, ddr_table[REGIDX_2E0]); + ast_moutdwm(ast, 0x1E6E02E4, ddr_table[REGIDX_2E4]); + ast_moutdwm(ast, 0x1E6E02E8, ddr_table[REGIDX_2E8]); + ast_moutdwm(ast, 0x1E6E02EC, ddr_table[REGIDX_2EC]); + ast_moutdwm(ast, 0x1E6E02F0, ddr_table[REGIDX_2F0]); + ast_moutdwm(ast, 0x1E6E02F4, ddr_table[REGIDX_2F4]); + ast_moutdwm(ast, 0x1E6E02F8, ddr_table[REGIDX_2F8]); + ast_moutdwm(ast, 0x1E6E0290, 0x00100008); + ast_moutdwm(ast, 0x1E6E02C0, 0x00000006); + + /* Controller Setting */ + ast_moutdwm(ast, 0x1E6E0034, 0x00020091); + + /* Wait DDR PHY init done */ + ddr_phy_init_2500(ast); + + ast_moutdwm(ast, 0x1E6E0120, ddr_table[REGIDX_PLL]); + ast_moutdwm(ast, 0x1E6E000C, 0x42AA5C81); + ast_moutdwm(ast, 0x1E6E0034, 0x0001AF93); + + check_dram_size_2500(ast, ddr_table[REGIDX_RFC]); + enable_cache_2500(ast); + ast_moutdwm(ast, 0x1E6E001C, 0x00000008); + ast_moutdwm(ast, 0x1E6E0038, 0xFFFFFF00); +} + +static void ddr4_init_2500(struct ast_private *ast, const u32 *ddr_table) +{ + u32 data, data2, pass, retrycnt; + u32 ddr_vref, phy_vref; + u32 min_ddr_vref = 0, min_phy_vref = 0; + u32 max_ddr_vref = 0, max_phy_vref = 0; + + ast_moutdwm(ast, 0x1E6E0004, 0x00000313); + ast_moutdwm(ast, 0x1E6E0010, ddr_table[REGIDX_010]); + ast_moutdwm(ast, 0x1E6E0014, ddr_table[REGIDX_014]); + ast_moutdwm(ast, 0x1E6E0018, ddr_table[REGIDX_018]); + ast_moutdwm(ast, 0x1E6E0020, ddr_table[REGIDX_020]); /* MODEREG4/6 */ + ast_moutdwm(ast, 0x1E6E0024, ddr_table[REGIDX_024]); /* MODEREG5 */ + ast_moutdwm(ast, 0x1E6E002C, ddr_table[REGIDX_02C] | 0x100); /* MODEREG0/2 */ + ast_moutdwm(ast, 0x1E6E0030, ddr_table[REGIDX_030]); /* MODEREG1/3 */ + + /* DDR PHY Setting */ + ast_moutdwm(ast, 0x1E6E0200, 0x42492AAE); + ast_moutdwm(ast, 0x1E6E0204, 0x09002000); + ast_moutdwm(ast, 0x1E6E020C, 0x55E00B0B); + ast_moutdwm(ast, 0x1E6E0210, 0x20000000); + ast_moutdwm(ast, 0x1E6E0214, ddr_table[REGIDX_214]); + ast_moutdwm(ast, 0x1E6E02E0, ddr_table[REGIDX_2E0]); + ast_moutdwm(ast, 0x1E6E02E4, ddr_table[REGIDX_2E4]); + ast_moutdwm(ast, 0x1E6E02E8, ddr_table[REGIDX_2E8]); + ast_moutdwm(ast, 0x1E6E02EC, ddr_table[REGIDX_2EC]); + ast_moutdwm(ast, 0x1E6E02F0, ddr_table[REGIDX_2F0]); + ast_moutdwm(ast, 0x1E6E02F4, ddr_table[REGIDX_2F4]); + ast_moutdwm(ast, 0x1E6E02F8, ddr_table[REGIDX_2F8]); + ast_moutdwm(ast, 0x1E6E0290, 0x00100008); + ast_moutdwm(ast, 0x1E6E02C4, 0x3C183C3C); + ast_moutdwm(ast, 0x1E6E02C8, 0x00631E0E); + + /* Controller Setting */ + ast_moutdwm(ast, 0x1E6E0034, 0x0001A991); + + /* Train PHY Vref first */ + pass = 0; + + for (retrycnt = 0; retrycnt < 4 && pass == 0; retrycnt++) { + max_phy_vref = 0x0; + pass = 0; + ast_moutdwm(ast, 0x1E6E02C0, 0x00001C06); + for (phy_vref = 0x40; phy_vref < 0x80; phy_vref++) { + ast_moutdwm(ast, 0x1E6E000C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + ast_moutdwm(ast, 0x1E6E02CC, phy_vref | (phy_vref << 8)); + /* Fire DFI Init */ + ddr_phy_init_2500(ast); + ast_moutdwm(ast, 0x1E6E000C, 0x00005C01); + if (cbr_test_2500(ast)) { + pass++; + data = ast_mindwm(ast, 0x1E6E03D0); + data2 = data >> 8; + data = data & 0xff; + if (data > data2) + data = data2; + if (max_phy_vref < data) { + max_phy_vref = data; + min_phy_vref = phy_vref; + } + } else if (pass > 0) + break; + } + } + ast_moutdwm(ast, 0x1E6E02CC, min_phy_vref | (min_phy_vref << 8)); + + /* Train DDR Vref next */ + pass = 0; + + for (retrycnt = 0; retrycnt < 4 && pass == 0; retrycnt++) { + min_ddr_vref = 0xFF; + max_ddr_vref = 0x0; + pass = 0; + for (ddr_vref = 0x00; ddr_vref < 0x40; ddr_vref++) { + ast_moutdwm(ast, 0x1E6E000C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + ast_moutdwm(ast, 0x1E6E02C0, 0x00000006 | (ddr_vref << 8)); + /* Fire DFI Init */ + ddr_phy_init_2500(ast); + ast_moutdwm(ast, 0x1E6E000C, 0x00005C01); + if (cbr_test_2500(ast)) { + pass++; + if (min_ddr_vref > ddr_vref) + min_ddr_vref = ddr_vref; + if (max_ddr_vref < ddr_vref) + max_ddr_vref = ddr_vref; + } else if (pass != 0) + break; + } + } + + ast_moutdwm(ast, 0x1E6E000C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + ddr_vref = (min_ddr_vref + max_ddr_vref + 1) >> 1; + ast_moutdwm(ast, 0x1E6E02C0, 0x00000006 | (ddr_vref << 8)); + + /* Wait DDR PHY init done */ + ddr_phy_init_2500(ast); + + ast_moutdwm(ast, 0x1E6E0120, ddr_table[REGIDX_PLL]); + ast_moutdwm(ast, 0x1E6E000C, 0x42AA5C81); + ast_moutdwm(ast, 0x1E6E0034, 0x0001AF93); + + check_dram_size_2500(ast, ddr_table[REGIDX_RFC]); + enable_cache_2500(ast); + ast_moutdwm(ast, 0x1E6E001C, 0x00000008); + ast_moutdwm(ast, 0x1E6E0038, 0xFFFFFF00); +} + +static bool ast_dram_init_2500(struct ast_private *ast) +{ + u32 data; + u32 max_tries = 5; + + do { + if (max_tries-- == 0) + return false; + set_mpll_2500(ast); + reset_mmc_2500(ast); + ddr_init_common_2500(ast); + + data = ast_mindwm(ast, 0x1E6E2070); + if (data & 0x01000000) + ddr4_init_2500(ast, ast2500_ddr4_1600_timing_table); + else + ddr3_init_2500(ast, ast2500_ddr3_1600_timing_table); + } while (!ddr_test_2500(ast)); + + ast_moutdwm(ast, 0x1E6E2040, ast_mindwm(ast, 0x1E6E2040) | 0x41); + + /* Patch code */ + data = ast_mindwm(ast, 0x1E6E200C) & 0xF9FFFFFF; + ast_moutdwm(ast, 0x1E6E200C, data | 0x10000000); + + return true; +} + +void ast_post_chip_2500(struct drm_device *dev) +{ + struct ast_private *ast = dev->dev_private; + u32 temp; + u8 reg; + + reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + if ((reg & 0x80) == 0) {/* vga only */ + /* Clear bus lock condition */ + ast_moutdwm(ast, 0x1e600000, 0xAEED1A03); + ast_moutdwm(ast, 0x1e600084, 0x00010000); + ast_moutdwm(ast, 0x1e600088, 0x00000000); + ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8); + ast_write32(ast, 0xf004, 0x1e6e0000); + ast_write32(ast, 0xf000, 0x1); + ast_write32(ast, 0x12000, 0x1688a8a8); + while (ast_read32(ast, 0x12000) != 0x1) + ; + + ast_write32(ast, 0x10000, 0xfc600309); + while (ast_read32(ast, 0x10000) != 0x1) + ; + + /* Slow down CPU/AHB CLK in VGA only mode */ + temp = ast_read32(ast, 0x12008); + temp |= 0x73; + ast_write32(ast, 0x12008, temp); + + /* Reset USB port to patch USB unknown device issue */ + ast_moutdwm(ast, 0x1e6e2090, 0x20000000); + temp = ast_mindwm(ast, 0x1e6e2094); + temp |= 0x00004000; + ast_moutdwm(ast, 0x1e6e2094, temp); + temp = ast_mindwm(ast, 0x1e6e2070); + if (temp & 0x00800000) { + ast_moutdwm(ast, 0x1e6e207c, 0x00800000); + mdelay(100); + ast_moutdwm(ast, 0x1e6e2070, 0x00800000); + } + + if (!ast_dram_init_2500(ast)) + printk(BIOS_ERR, "AST: DRAM init failed !\n"); + + temp = ast_mindwm(ast, 0x1e6e2040); + ast_moutdwm(ast, 0x1e6e2040, temp | 0x40); + } + + /* wait ready */ + do { + reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + } while ((reg & 0x40) == 0); } diff --git a/src/drivers/aspeed/common/ast_tables.h b/src/drivers/aspeed/common/ast_tables.h index 6c20f36..d665dd5 100644 --- a/src/drivers/aspeed/common/ast_tables.h +++ b/src/drivers/aspeed/common/ast_tables.h @@ -47,68 +47,99 @@ #define SyncPN (PVSync | NHSync) #define SyncNP (NVSync | PHSync) #define SyncNN (NVSync | NHSync) +#define AST2500PreCatchCRT 0x00004000 /* DCLK Index */ -#define VCLK25_175 0x00 -#define VCLK28_322 0x01 -#define VCLK31_5 0x02 -#define VCLK36 0x03 -#define VCLK40 0x04 -#define VCLK49_5 0x05 -#define VCLK50 0x06 -#define VCLK56_25 0x07 -#define VCLK65 0x08 -#define VCLK75 0x09 -#define VCLK78_75 0x0A -#define VCLK94_5 0x0B -#define VCLK108 0x0C -#define VCLK135 0x0D -#define VCLK157_5 0x0E -#define VCLK162 0x0F -/* #define VCLK193_25 0x10 */ -#define VCLK154 0x10 -#define VCLK83_5 0x11 -#define VCLK106_5 0x12 -#define VCLK146_25 0x13 -#define VCLK148_5 0x14 -#define VCLK71 0x15 -#define VCLK88_75 0x16 -#define VCLK119 0x17 -#define VCLK85_5 0x18 -#define VCLK97_75 0x19 -#define VCLK118_25 0x1A +#define VCLK25_175 0x00 +#define VCLK28_322 0x01 +#define VCLK31_5 0x02 +#define VCLK36 0x03 +#define VCLK40 0x04 +#define VCLK49_5 0x05 +#define VCLK50 0x06 +#define VCLK56_25 0x07 +#define VCLK65 0x08 +#define VCLK75 0x09 +#define VCLK78_75 0x0A +#define VCLK94_5 0x0B +#define VCLK108 0x0C +#define VCLK135 0x0D +#define VCLK157_5 0x0E +#define VCLK162 0x0F +/* #define VCLK193_25 0x10 */ +#define VCLK154 0x10 +#define VCLK83_5 0x11 +#define VCLK106_5 0x12 +#define VCLK146_25 0x13 +#define VCLK148_5 0x14 +#define VCLK71 0x15 +#define VCLK88_75 0x16 +#define VCLK119 0x17 +#define VCLK85_5 0x18 +#define VCLK97_75 0x19 +#define VCLK118_25 0x1A -static struct ast_vbios_dclk_info dclk_table[] = { - {0x2C, 0xE7, 0x03}, /* 00: VCLK25_175 */ - {0x95, 0x62, 0x03}, /* 01: VCLK28_322 */ - {0x67, 0x63, 0x01}, /* 02: VCLK31_5 */ - {0x76, 0x63, 0x01}, /* 03: VCLK36 */ - {0xEE, 0x67, 0x01}, /* 04: VCLK40 */ - {0x82, 0x62, 0x01}, /* 05: VCLK49_5 */ - {0xC6, 0x64, 0x01}, /* 06: VCLK50 */ - {0x94, 0x62, 0x01}, /* 07: VCLK56_25 */ - {0x80, 0x64, 0x00}, /* 08: VCLK65 */ - {0x7B, 0x63, 0x00}, /* 09: VCLK75 */ - {0x67, 0x62, 0x00}, /* 0A: VCLK78_75 */ - {0x7C, 0x62, 0x00}, /* 0B: VCLK94_5 */ - {0x8E, 0x62, 0x00}, /* 0C: VCLK108 */ - {0x85, 0x24, 0x00}, /* 0D: VCLK135 */ - {0x67, 0x22, 0x00}, /* 0E: VCLK157_5 */ - {0x6A, 0x22, 0x00}, /* 0F: VCLK162 */ - {0x4d, 0x4c, 0x80}, /* 10: VCLK154 */ - {0xa7, 0x78, 0x80}, /* 11: VCLK83.5 */ - {0x28, 0x49, 0x80}, /* 12: VCLK106.5 */ - {0x37, 0x49, 0x80}, /* 13: VCLK146.25 */ - {0x1f, 0x45, 0x80}, /* 14: VCLK148.5 */ - {0x47, 0x6c, 0x80}, /* 15: VCLK71 */ - {0x25, 0x65, 0x80}, /* 16: VCLK88.75 */ - {0x77, 0x58, 0x80}, /* 17: VCLK119 */ - {0x32, 0x67, 0x80}, /* 18: VCLK85_5 */ - {0x6a, 0x6d, 0x80}, /* 19: VCLK97_75 */ - {0x3b, 0x2c, 0x81}, /* 1A: VCLK118_25 */ +static const struct ast_vbios_dclk_info dclk_table[] = { + {0x2C, 0xE7, 0x03}, /* 00: VCLK25_175 */ + {0x95, 0x62, 0x03}, /* 01: VCLK28_322 */ + {0x67, 0x63, 0x01}, /* 02: VCLK31_5 */ + {0x76, 0x63, 0x01}, /* 03: VCLK36 */ + {0xEE, 0x67, 0x01}, /* 04: VCLK40 */ + {0x82, 0x62, 0x01}, /* 05: VCLK49_5 */ + {0xC6, 0x64, 0x01}, /* 06: VCLK50 */ + {0x94, 0x62, 0x01}, /* 07: VCLK56_25 */ + {0x80, 0x64, 0x00}, /* 08: VCLK65 */ + {0x7B, 0x63, 0x00}, /* 09: VCLK75 */ + {0x67, 0x62, 0x00}, /* 0A: VCLK78_75 */ + {0x7C, 0x62, 0x00}, /* 0B: VCLK94_5 */ + {0x8E, 0x62, 0x00}, /* 0C: VCLK108 */ + {0x85, 0x24, 0x00}, /* 0D: VCLK135 */ + {0x67, 0x22, 0x00}, /* 0E: VCLK157_5 */ + {0x6A, 0x22, 0x00}, /* 0F: VCLK162 */ + {0x4d, 0x4c, 0x80}, /* 10: VCLK154 */ + {0x68, 0x6f, 0x80}, /* 11: VCLK83.5 */ + {0x28, 0x49, 0x80}, /* 12: VCLK106.5 */ + {0x37, 0x49, 0x80}, /* 13: VCLK146.25 */ + {0x1f, 0x45, 0x80}, /* 14: VCLK148.5 */ + {0x47, 0x6c, 0x80}, /* 15: VCLK71 */ + {0x25, 0x65, 0x80}, /* 16: VCLK88.75 */ + {0x77, 0x58, 0x80}, /* 17: VCLK119 */ + {0x32, 0x67, 0x80}, /* 18: VCLK85_5 */ + {0x6a, 0x6d, 0x80}, /* 19: VCLK97_75 */ + {0x3b, 0x2c, 0x81}, /* 1A: VCLK118_25 */ }; -static struct ast_vbios_stdtable vbios_stdtable[] = { +static const struct ast_vbios_dclk_info dclk_table_ast2500[] = { + {0x2C, 0xE7, 0x03}, /* 00: VCLK25_175 */ + {0x95, 0x62, 0x03}, /* 01: VCLK28_322 */ + {0x67, 0x63, 0x01}, /* 02: VCLK31_5 */ + {0x76, 0x63, 0x01}, /* 03: VCLK36 */ + {0xEE, 0x67, 0x01}, /* 04: VCLK40 */ + {0x82, 0x62, 0x01}, /* 05: VCLK49_5 */ + {0xC6, 0x64, 0x01}, /* 06: VCLK50 */ + {0x94, 0x62, 0x01}, /* 07: VCLK56_25 */ + {0x80, 0x64, 0x00}, /* 08: VCLK65 */ + {0x7B, 0x63, 0x00}, /* 09: VCLK75 */ + {0x67, 0x62, 0x00}, /* 0A: VCLK78_75 */ + {0x7C, 0x62, 0x00}, /* 0B: VCLK94_5 */ + {0x8E, 0x62, 0x00}, /* 0C: VCLK108 */ + {0x85, 0x24, 0x00}, /* 0D: VCLK135 */ + {0x67, 0x22, 0x00}, /* 0E: VCLK157_5 */ + {0x6A, 0x22, 0x00}, /* 0F: VCLK162 */ + {0x4d, 0x4c, 0x80}, /* 10: VCLK154 */ + {0x68, 0x6f, 0x80}, /* 11: VCLK83.5 */ + {0x28, 0x49, 0x80}, /* 12: VCLK106.5 */ + {0x37, 0x49, 0x80}, /* 13: VCLK146.25 */ + {0x1f, 0x45, 0x80}, /* 14: VCLK148.5 */ + {0x47, 0x6c, 0x80}, /* 15: VCLK71 */ + {0x25, 0x65, 0x80}, /* 16: VCLK88.75 */ + {0x58, 0x01, 0x42}, /* 17: VCLK119 */ + {0x32, 0x67, 0x80}, /* 18: VCLK85_5 */ + {0x6a, 0x6d, 0x80}, /* 19: VCLK97_75 */ + {0x44, 0x20, 0x43}, /* 1A: VCLK118_25 */ +}; + +static const struct ast_vbios_stdtable vbios_stdtable[] = { /* MD_2_3_400 */ { 0x67, @@ -181,7 +212,7 @@ }, }; -static struct ast_vbios_enhtable res_640x480[] = { +static const struct ast_vbios_enhtable res_640x480[] = { { 800, 640, 8, 96, 525, 480, 2, 2, VCLK25_175, /* 60Hz */ (SyncNN | HBorder | VBorder | Charx8Dot), 60, 1, 0x2E }, { 832, 640, 16, 40, 520, 480, 1, 3, VCLK31_5, /* 72Hz */ @@ -194,7 +225,7 @@ (SyncNN | Charx8Dot) , 0xFF, 4, 0x2E }, }; -static struct ast_vbios_enhtable res_800x600[] = { +static const struct ast_vbios_enhtable res_800x600[] = { {1024, 800, 24, 72, 625, 600, 1, 2, VCLK36, /* 56Hz */ (SyncPP | Charx8Dot), 56, 1, 0x30 }, {1056, 800, 40, 128, 628, 600, 1, 4, VCLK40, /* 60Hz */ @@ -210,7 +241,7 @@ }; -static struct ast_vbios_enhtable res_1024x768[] = { +static const struct ast_vbios_enhtable res_1024x768[] = { {1344, 1024, 24, 136, 806, 768, 3, 6, VCLK65, /* 60Hz */ (SyncNN | Charx8Dot), 60, 1, 0x31 }, {1328, 1024, 24, 136, 806, 768, 3, 6, VCLK75, /* 70Hz */ @@ -223,7 +254,7 @@ (SyncPP | Charx8Dot), 0xFF, 4, 0x31 }, }; -static struct ast_vbios_enhtable res_1280x1024[] = { +static const struct ast_vbios_enhtable res_1280x1024[] = { {1688, 1280, 48, 112, 1066, 1024, 1, 3, VCLK108, /* 60Hz */ (SyncPP | Charx8Dot), 60, 1, 0x32 }, {1688, 1280, 16, 144, 1066, 1024, 1, 3, VCLK135, /* 75Hz */ @@ -234,7 +265,7 @@ (SyncPP | Charx8Dot), 0xFF, 3, 0x32 }, }; -static struct ast_vbios_enhtable res_1600x1200[] = { +static const struct ast_vbios_enhtable res_1600x1200[] = { {2160, 1600, 64, 192, 1250, 1200, 1, 3, VCLK162, /* 60Hz */ (SyncPP | Charx8Dot), 60, 1, 0x33 }, {2160, 1600, 64, 192, 1250, 1200, 1, 3, VCLK162, /* end */ @@ -242,34 +273,39 @@ }; /* 16:9 */ -static struct ast_vbios_enhtable res_1360x768[] = { - {1792, 1360, 64,112, 795, 768, 3, 6, VCLK85_5, /* 60Hz */ +static const struct ast_vbios_enhtable res_1360x768[] = { + {1792, 1360, 64, 112, 795, 768, 3, 6, VCLK85_5, /* 60Hz */ (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x39 }, - {1792, 1360, 64,112, 795, 768, 3, 6, VCLK85_5, /* end */ - (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x39 }, + {1792, 1360, 64, 112, 795, 768, 3, 6, VCLK85_5, /* end */ + (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 0xFF, 1, 0x39 }, }; -static struct ast_vbios_enhtable res_1600x900[] = { - {1760, 1600, 48, 32, 926, 900, 3, 5, VCLK97_75, /* 60Hz CVT RB */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x3A }, - {2112, 1600, 88,168, 934, 900, 3, 5, VCLK118_25, /* 60Hz CVT */ +static const struct ast_vbios_enhtable res_1600x900[] = { + {1760, 1600, 48, 32, 926, 900, 3, 5, VCLK97_75, /* 60Hz CVT RB */ + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x3A }, + {2112, 1600, 88, 168, 934, 900, 3, 5, VCLK118_25, /* 60Hz CVT */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 2, 0x3A }, - {2112, 1600, 88,168, 934, 900, 3, 5, VCLK118_25, /* 60Hz CVT */ + {2112, 1600, 88, 168, 934, 900, 3, 5, VCLK118_25, /* 60Hz CVT */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 2, 0x3A }, }; -static struct ast_vbios_enhtable res_1920x1080[] = { +static const struct ast_vbios_enhtable res_1920x1080[] = { {2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5, /* 60Hz */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x38 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x38 }, {2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5, /* 60Hz */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x38 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 0xFF, 1, 0x38 }, }; /* 16:10 */ -static struct ast_vbios_enhtable res_1280x800[] = { +static const struct ast_vbios_enhtable res_1280x800[] = { {1440, 1280, 48, 32, 823, 800, 3, 6, VCLK71, /* 60Hz RB */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x35 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x35 }, {1680, 1280, 72,128, 831, 800, 3, 6, VCLK83_5, /* 60Hz */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 2, 0x35 }, {1680, 1280, 72,128, 831, 800, 3, 6, VCLK83_5, /* 60Hz */ @@ -277,29 +313,33 @@ }; -static struct ast_vbios_enhtable res_1440x900[] = { +static const struct ast_vbios_enhtable res_1440x900[] = { {1600, 1440, 48, 32, 926, 900, 3, 6, VCLK88_75, /* 60Hz RB */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x36 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x36 }, {1904, 1440, 80,152, 934, 900, 3, 6, VCLK106_5, /* 60Hz */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 2, 0x36 }, {1904, 1440, 80,152, 934, 900, 3, 6, VCLK106_5, /* 60Hz */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 2, 0x36 }, }; -static struct ast_vbios_enhtable res_1680x1050[] = { +static const struct ast_vbios_enhtable res_1680x1050[] = { {1840, 1680, 48, 32, 1080, 1050, 3, 6, VCLK119, /* 60Hz RB */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x37 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x37 }, {2240, 1680,104,176, 1089, 1050, 3, 6, VCLK146_25, /* 60Hz */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 2, 0x37 }, {2240, 1680,104,176, 1089, 1050, 3, 6, VCLK146_25, /* 60Hz */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 2, 0x37 }, }; -static struct ast_vbios_enhtable res_1920x1200[] = { +static const struct ast_vbios_enhtable res_1920x1200[] = { {2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz RB*/ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x34 }, - {2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz RB */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x34 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x34 }, + {2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz RB */ + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 0xFF, 1, 0x34 }, }; #endif -- To view, visit https://review.coreboot.org/c/coreboot/+/34793 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I25bd34dd52a0acd3e04fc5818e011215ef907fad Gerrit-Change-Number: 34793 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

5 10

Change in coreboot[master]: [WIP, DONOTMERGE] soc/intel: (try to) run clang-format
by Angel Pons (Code Review) 12 Dec '19

12 Dec '19

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35090 ) Change subject: [WIP, DONOTMERGE] soc/intel: (try to) run clang-format ...................................................................... [WIP, DONOTMERGE] soc/intel: (try to) run clang-format Change-Id: I4a1e646d81da329479d6179ed1a42879b5d10fee Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/soc/intel/apollolake/acpi.c M src/soc/intel/apollolake/chip.c M src/soc/intel/apollolake/romstage.c M src/soc/intel/apollolake/uart.c M src/soc/intel/broadwell/acpi.c M src/soc/intel/broadwell/finalize.c M src/soc/intel/broadwell/lpc.c M src/soc/intel/broadwell/smmrelocate.c M src/soc/intel/broadwell/systemagent.c M src/soc/intel/cannonlake/acpi.c M src/soc/intel/cannonlake/fsp_params.c M src/soc/intel/cannonlake/romstage/fsp_params.c M src/soc/intel/cannonlake/smmrelocate.c M src/soc/intel/cannonlake/uart.c M src/soc/intel/common/block/graphics/graphics.c M src/soc/intel/common/block/gspi/gspi.c M src/soc/intel/common/block/i2c/i2c.c M src/soc/intel/common/block/xhci/xhci.c M src/soc/intel/denverton_ns/memmap.c M src/soc/intel/fsp_baytrail/acpi.c M src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c M src/soc/intel/fsp_broadwell_de/acpi.c M src/soc/intel/icelake/fsp_params.c M src/soc/intel/icelake/romstage/fsp_params.c M src/soc/intel/icelake/smmrelocate.c M src/soc/intel/icelake/uart.c M src/soc/intel/skylake/acpi.c M src/soc/intel/skylake/chip.c M src/soc/intel/skylake/chip_fsp20.c M src/soc/intel/skylake/irq.c M src/soc/intel/skylake/memmap.c M src/soc/intel/skylake/romstage/romstage_fsp20.c M src/soc/intel/skylake/romstage/systemagent.c M src/soc/intel/skylake/smmrelocate.c M src/soc/intel/skylake/systemagent.c M src/soc/intel/skylake/uart.c M src/soc/intel/skylake/vr_config.c 37 files changed, 2,180 insertions(+), 2,595 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/90/35090/1 -- To view, visit https://review.coreboot.org/c/coreboot/+/35090 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4a1e646d81da329479d6179ed1a42879b5d10fee Gerrit-Change-Number: 35090 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

2 2

Change in coreboot[master]: payloads/bayou: remove unhooked payload
by Angel Pons (Code Review) 09 Dec '19

09 Dec '19

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34565 ) Change subject: payloads/bayou: remove unhooked payload ...................................................................... payloads/bayou: remove unhooked payload The bayou payload is not attached to the build system in any way, and has not been for quite a while. Since selecting it in Kconfig does nothing, remove this payload now that coreboot 4.10 has been released. Change-Id: Icfb18b88e460a4e4b538b7efe907d4eef6c40638 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M payloads/Kconfig D payloads/bayou/Doxyfile D payloads/bayou/Makefile D payloads/bayou/bayou.h D payloads/bayou/bayou.ldscript D payloads/bayou/bayou.xml.example D payloads/bayou/config.c D payloads/bayou/lzma.c D payloads/bayou/lzmadecode.c D payloads/bayou/lzmadecode.h D payloads/bayou/main.c D payloads/bayou/menu.c D payloads/bayou/nrv2b.c D payloads/bayou/payload.c D payloads/bayou/self.c D payloads/bayou/self.h 16 files changed, 0 insertions(+), 3,181 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/65/34565/1 diff --git a/payloads/Kconfig b/payloads/Kconfig index d0f8a44..da597a8 100644 --- a/payloads/Kconfig +++ b/payloads/Kconfig @@ -40,21 +40,12 @@ You will be able to specify the location and file name of the payload image later. -config PAYLOAD_BAYOU - bool "Bayou" - depends on ARCH_X86 - help - Select this option if you want to set bayou as your primary - payload. - source "payloads/external/*/Kconfig.name" endchoice source "payloads/external/*/Kconfig" -source "payloads/bayou/Kconfig" - config PAYLOAD_FILE string "Payload path and filename" depends on PAYLOAD_ELF || PAYLOAD_FIT diff --git a/payloads/bayou/Doxyfile b/payloads/bayou/Doxyfile deleted file mode 100644 index acab01c..0000000 --- a/payloads/bayou/Doxyfile +++ /dev/null @@ -1,1635 +0,0 @@ -# Doxyfile 1.7.1 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See -# http://www.gnu.org/software/libiconv for the list of possible encodings. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - -PROJECT_NAME = bayou - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = doxygen - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - -CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, -# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = YES - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = YES - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments -# (thus requiring an explicit @brief command for a brief description.) - -JAVADOC_AUTOBRIEF = YES - -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified -# scopes will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for -# Fortran. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for -# VHDL. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public -# instead of private inheritance when no explicit protection keyword is present. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen to replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - -SUBGROUPING = YES - -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. - -TYPEDEF_HIDES_STRUCT = NO - -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penality. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will rougly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols - -SYMBOL_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = YES - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default -# anonymous namespace are hidden. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - -CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = YES - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen -# will list include files with double quotes in the documentation -# rather than with sharp brackets. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen -# will sort the (brief and detailed) documentation of class members so that -# constructors and destructors are listed first. If set to NO (the default) -# the constructors will appear in the respective orders defined by -# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. -# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO -# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) -# the group names will appear in their defined order. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - -SORT_BY_SCOPE_NAME = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the -# Folder Tree View (if specified). The default is YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. -# This will remove the Namespaces entry from the Quick Index -# and from the Folder Tree View (if specified). The default is YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command <command> <input-file>, where <command> is the value of -# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file -# provided by doxygen. Whatever the program writes to standard output -# is used as the file version. See the manual for examples. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. -# You can optionally specify a file name after the option, if omitted -# DoxygenLayout.xml will be used as the name of the layout file. - -LAYOUT_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be abled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - -WARN_NO_PARAMDOC = YES - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = . - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for -# the list of possible encodings. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 - -FILE_PATTERNS = - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = YES - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - -EXCLUDE = util/kconfig - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded -# from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories -# for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test - -EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command <filter> <input-file>, where <filter> -# is the value of the INPUT_FILTER tag, and <input-file> is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. -# Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. -# The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER -# is applied to all files. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - -FILTER_SOURCE_FILES = NO - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - -SOURCE_BROWSER = YES - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - -STRIP_CODE_COMMENTS = NO - -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = YES - -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. -# Otherwise they will link to the documentation. - -REFERENCES_LINK_SOURCE = YES - -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You -# will need version 4.8.6 or higher. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = YES - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = YES - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# If the HTML_FOOTER_DESCRIPTION tag is set to YES, Doxygen will -# add generated date, project name and doxygen version to HTML footer. - -HTML_FOOTER_DESCRIPTION= YES - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! - -HTML_STYLESHEET = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. -# Doxygen will adjust the colors in the stylesheet and background images -# according to this color. Hue is specified as an angle on a colorwheel, -# see http://en.wikipedia.org/wiki/Hue for more information. -# For instance the value 0 represents red, 60 is yellow, 120 is green, -# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. -# The allowed range is 0 to 359. - -HTML_COLORSTYLE_HUE = 220 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of -# the colors in the HTML output. For a value of 0 the output will use -# grayscales only. A value of 255 will produce the most vivid colors. - -HTML_COLORSTYLE_SAT = 100 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to -# the luminance component of the colors in the HTML output. Values below -# 100 gradually make the output lighter, whereas values above 100 make -# the output darker. The value divided by 100 is the actual gamma applied, -# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, -# and 100 does not change the gamma. - -HTML_COLORSTYLE_GAMMA = 80 - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting -# this to NO can help when comparing the output of multiple runs. - -HTML_TIMESTAMP = NO - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). - -HTML_DYNAMIC_SECTIONS = YES - -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. - -GENERATE_DOCSET = NO - -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) -# can be grouped. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen -# will append .docset to the name. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. - -DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. - -DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file -# content. - -CHM_INDEX_ENCODING = - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - -TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated -# that can be used as input for Qt's qhelpgenerator to generate a -# Qt Compressed Help (.qch) of the generated HTML documentation. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. -# The path specified is relative to the HTML output folder. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#namespace - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#virtual-folders - -QHP_VIRTUAL_FOLDER = doc - -# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to -# add. For more information please see -# http://doc.trolltech.com/qthelpproject.html#custom-filters - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see -# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> -# Qt Help Project / Custom Filters</a>. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's -# filter section matches. -# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> -# Qt Help Project / Filter Attributes</a>. - -QHP_SECT_FILTER_ATTRS = - -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated -# .qhp file. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files -# will be generated, which together with the HTML files, form an Eclipse help -# plugin. To install this plugin and make it available under the help contents -# menu in Eclipse, the contents of the directory containing the HTML and XML -# files needs to be copied into the plugins directory of eclipse. The name of -# the directory within the plugins directory should be the same as -# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before -# the help appears. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have -# this name. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - -DISABLE_INDEX = NO - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - -ENUM_VALUES_PER_LINE = 4 - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to YES, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). -# Windows users are probably better off using the HTML help feature. - -GENERATE_TREEVIEW = YES - -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open -# links to external symbols imported via tag files in a separate window. - -EXT_LINKS_IN_WINDOW = NO - -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory -# to force them to be regenerated. - -FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are -# not supported properly for IE 6.0, but are supported on all modern browsers. -# Note that when changing this option you need to delete any form_*.png files -# in the HTML output before the changes have effect. - -FORMULA_TRANSPARENT = YES - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box -# for the HTML output. The underlying search engine uses javascript -# and DHTML and should work on any modern browser. Note that when using -# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets -# (GENERATE_DOCSET) there is already a search function so this one should -# typically be disabled. For large projects the javascript based search engine -# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. - -SEARCHENGINE = YES - -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a PHP enabled web server instead of at the web client -# using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server -# based approach is that it scales better to large projects and allows -# full text search. The disadvances is that it is more difficult to setup -# and does not have live searching capabilities. - -SERVER_BASED_SEARCH = NO - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the -# Makefile that is written to the output directory. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = NO - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = NO - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - -LATEX_HIDE_INDICES = NO - -# If LATEX_SOURCE_CODE is set to YES then doxygen will include -# source code with syntax highlighting in the LaTeX output. -# Note that which sources are shown also depends on other settings -# such as SOURCE_BROWSER. - -LATEX_SOURCE_CODE = NO - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - -XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - -XML_PROGRAMLISTING = YES - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. -# This is useful -# if you want to understand what is going on. -# On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_DEFINED tags. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - -PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse -# the parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option is superseded by the HAVE_DOT option below. This is only a -# fallback. It is recommended to install and use dot, since it yields more -# powerful graphs. - -CLASS_DIAGRAMS = YES - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = NO - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = YES - -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is -# allowed to run in parallel. When set to 0 (the default) doxygen will -# base this on the number of processors available in the system. You can set it -# explicitly to a value larger than 0 to get control over the balance -# between CPU load and processing speed. - -DOT_NUM_THREADS = 0 - -# By default doxygen will write a font called FreeSans.ttf to the output -# directory and reference it in all dot files that doxygen generates. This -# font does not include all possible unicode characters however, so when you need -# these (or just want a differently looking font) you can specify the font name -# using DOT_FONTNAME. You need need to make sure dot is able to find the font, -# which can be done by putting it in a standard location or by setting the -# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory -# containing the font. - -DOT_FONTNAME = FreeSans - -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. -# The default size is 10pt. - -DOT_FONTSIZE = 10 - -# By default doxygen will tell dot to use the output directory to look for the -# FreeSans.ttf font (which doxygen will put there itself). If you specify a -# different font using DOT_FONTNAME you can set the path where dot -# can find it using this tag. - -DOT_FONTPATH = - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = YES - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - -GROUP_GRAPHS = YES - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - -UML_LOOK = YES - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs -# for selected functions only using the \callgraph command. - -CALL_GRAPH = YES - -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller -# graphs for selected functions only using the \callergraph command. - -CALLER_GRAPH = YES - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = YES - -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - -DIRECTORY_GRAPH = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - -DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note -# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. - -DOT_GRAPH_MAX_NODES = 50 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. - -MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of -# a graph (i.e. they become hard to read). - -DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - -DOT_MULTI_TARGETS = YES - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES diff --git a/payloads/bayou/Makefile b/payloads/bayou/Makefile deleted file mode 100644 index 7a4b08b..0000000 --- a/payloads/bayou/Makefile +++ /dev/null @@ -1,67 +0,0 @@ -## -## This file is part of the bayou project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License version 2 as -## published by the Free Software Foundation. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -CONFIG_LZMA=y -CONFIG_NRV2B=y -CONFIG_BUILTIN_LAR=y - -PBUILDER_CONFIG=bayou.xml -BUILTIN_LAR=builtin.lar - -export src := $(CURDIR) -export obj := $(src)/build - -LIBPAYLOAD_DIR := $(obj)/libpayload - -CC?=gcc -STRIP?=strip -OBJCOPY?=objcopy - -FFLAGS-y= -FFLAGS-$(CONFIG_BUILTIN_LAR) += -DCONFIG_BUILTIN_LAR -FFLAGS-$(CONFIG_LZMA) += -DCONFIG_LZMA -FFLAGS-$(CONFIG_NRV2B) += -DCONFIG_NRV2B - -OBJECTS-y=main.o payload.o config.o menu.o self.o -OBJECTS-$(CONFIG_LZMA) += lzma.o -OBJECTS-$(CONFIG_NRV2B) += nrv2b.o -OBJECTS-$(CONFIG_BUILTIN_LAR) += builtin-lar.o - -CFLAGS= -Wall -Werror -Os $(FFLAGS-y) -LDFLAGS=-Wl,-T,bayou.ldscript -static -LIBGCC=$(shell $(CC) -m32 -print-libgcc-file-name) - -LPCC=$(LIBPAYLOAD_DIR)/bin/lpgcc - -bayou.elf: $(OBJECTS-y) - $(LPCC) $(LDFLAGS) -m32 -o $@ $(OBJECTS-y) - @$(STRIP) $@ - -builtin-lar.o: $(BUILTIN_LAR) - @$(OBJCOPY) -I binary -B i386 -O elf32-i386 $(BUILTIN_LAR) $@ - -builtin.lar: util/pbuilder/pbuilder - @rm -f $@ - util/pbuilder/pbuilder -c $(PBUILDER_CONFIG) create $@ - -util/pbuilder/pbuilder: - $(MAKE) -C util/pbuilder - -%.o: %.c - $(LPCC) $(CFLAGS) -c -o $@ $< - -clean: - rm -f *.o bayou.elf builtin.lar - $(MAKE) -C util/pbuilder clean diff --git a/payloads/bayou/bayou.h b/payloads/bayou/bayou.h deleted file mode 100644 index 6bf10a5..0000000 --- a/payloads/bayou/bayou.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef BAYOU_H_ -#define BAYOU_H_ - -#include <libpayload.h> - -#define BAYOU_MAX_ENTRIES 10 - -struct bpt_config { - u32 id; - u8 timeout; - u8 entries; - u8 padding[10]; -}; - -struct bpt_pentry { - u8 index; - u8 parent; - u8 type; - u8 flags; - u8 title[64]; - u8 nlen; -}; - -#define BPT_ID 0x30545042 -#define BPT_TYPE_CHOOSER 0x01 -#define BPT_TYPE_CHAIN 0x02 -#define BPT_TYPE_SUBCHAIN 0x03 - -#define BPT_FLAG_DEFAULT 0x01 -#define BPT_FLAG_NOSHOW 0x02 - -enum bayou_params { - BAYOU_PARAM_NAME = 0, - BAYOU_PARAM_LIST, - BAYOU_PARAM_DESC, - BAYOU_PARAMS_COUNT -}; - -struct payload { - struct bpt_pentry pentry; - struct larstat stat; - u8 *fptr; - char *params[BAYOU_PARAMS_COUNT]; -}; - -struct bayoucfg { - u8 timeout; - int n_entries; - struct payload entries[BAYOU_MAX_ENTRIES]; -}; - -extern struct bayoucfg bayoucfg; - -int verify_self(u8 *ptr); -int self_get_params(u8 *fptr, u8 **params); -int self_load_and_run(struct payload *p, int *ret); - -void menu(void); - -void run_payload(struct payload *p); -char *payload_get_name(struct payload *p); -struct payload *payload_get_default(void); -void run_payload_timeout(struct payload *p, int timeout); -void payload_parse_params(struct payload *pload, u8 *params, int len); - -int get_configuration(struct LAR *lar); - -#endif diff --git a/payloads/bayou/bayou.ldscript b/payloads/bayou/bayou.ldscript deleted file mode 100644 index 86baaec..0000000 --- a/payloads/bayou/bayou.ldscript +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -BASE_ADDRESS = 0x19000; - -OUTPUT_FORMAT(elf32-i386) -OUTPUT_ARCH(i386) - -ENTRY(_entry) - -HEAP_SIZE = 16384; -STACK_SIZE = 16384; - -SECTIONS -{ - . = BASE_ADDRESS; - - . = ALIGN(16); - _start = .; - - .text : { - *(.text._entry) - *(.text) - *(.text.*) - } - - .rodata : { - *(.rodata) - *(.rodata.*) - } - - .data : { - *(.data) - *(.data.*) - } - - _edata = .; - - .bss : { - *(.bss) - *(.bss.*) - *(COMMON) - - /* Stack and heap */ - - . = ALIGN(16); - _heap = .; - . += HEAP_SIZE; - . = ALIGN(16); - _eheap = .; - - _estack = .; - . += STACK_SIZE; - . = ALIGN(16); - _stack = .; - } - - _end = .; - - /DISCARD/ : { *(.comment) *(.note) *(.note.*) } -} diff --git a/payloads/bayou/bayou.xml.example b/payloads/bayou/bayou.xml.example deleted file mode 100644 index c52eaf2..0000000 --- a/payloads/bayou/bayou.xml.example +++ /dev/null @@ -1,37 +0,0 @@ - - - - -<BayouConfig> - <global> - <timeout>10</timeout> - </global> - <payloads> - <payload type="chain" flags="default"> - <title>Default Chain</title> - <chain> - <file>payloads/passwd.elf</file> - <lar>passwd</lar> - </chain> - <chain> - <file>payloads/coreinfo.elf</file> - </chain> - </payload> - <payload type="chooser"> - <file>payloads/coreinfo.elf</file> - </payload> - </payloads> -</BayouConfig> diff --git a/payloads/bayou/config.c b/payloads/bayou/config.c deleted file mode 100644 index ad315c8..0000000 --- a/payloads/bayou/config.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" - -struct bayoucfg bayoucfg; - -static int add_payload(struct LAR *lar, struct larent *larent) -{ - struct payload *payload; - int plen; - u8 *params = NULL; - u8 *fptr; - - if (bayoucfg.n_entries == BAYOU_MAX_ENTRIES) - return -1; - - payload = &bayoucfg.entries[bayoucfg.n_entries]; - - if (strncmp((char *)larent->name, "payload/", 8)) - return -1; - - if (larstat(lar, (const char *)larent->name, &payload->stat)) - return -1; - - /* Make sure the LAR entry is valid. */ - if (!lfverify(lar, (const char *)larent->name)) - return -1; - - /* Get a pointer to the start of the file. */ - fptr = larfptr(lar, (const char *)larent->name); - - if (fptr == NULL) - return -1; - - if (!verify_self(fptr)) - return -1; - - payload->pentry.index = bayoucfg.n_entries; - payload->pentry.parent = 0; - payload->pentry.type = BPT_TYPE_CHOOSER; - payload->pentry.flags = 0; - - plen = self_get_params(fptr, &params); - payload_parse_params(payload, params, plen); - - payload->fptr = fptr; - - bayoucfg.n_entries++; - - return 0; -} - -static int lar_walk_files(struct LAR *lar, - int (*cb) (struct LAR *, struct larent *)) -{ - struct larent *larent; - int ret = 0; - - rewindlar(lar); - - while ((larent = readlar(lar)) != NULL) { - if ((ret = cb(lar, larent))) - break; - } - - return ret; -} - -/** - * If reading the bayou_payload_table fails for some reason, then construct - * a dummy table. All valid payloads in the lar are added as chooser items. - */ -static void build_dummy_table(struct LAR *lar) -{ - bayoucfg.timeout = 0xFF; - bayoucfg.n_entries = 0; - - lar_walk_files(lar, add_payload); -} - -int get_configuration(struct LAR *lar) -{ - struct larstat stat; - struct bpt_config *bptcfg; - u8 *fptr, *ptr; - int i; - - /* - * If bayou_payload_table doesn't exist, then dummy up - * a table from the LAR contents. - */ - if (larstat(lar, "bayou_payload_table", &stat) || - !lfverify(lar, "bayou_payload_table")) - build_dummy_table(lar); - - /* Open up the BPT and get the creamy goodness within. */ - - fptr = larfptr(lar, "bayou_payload_table"); - - if (fptr == NULL) - build_dummy_table(lar); - - bptcfg = (struct bpt_config *)fptr; - bayoucfg.timeout = bptcfg->timeout; - - bayoucfg.n_entries = bptcfg->entries; - - if (bayoucfg.n_entries > BAYOU_MAX_ENTRIES) { - printf("W: Limiting the number of entries to %d\n", - BAYOU_MAX_ENTRIES); - bayoucfg.n_entries = BAYOU_MAX_ENTRIES; - } - - ptr = fptr + sizeof(struct bpt_config); - - for (i = 0; i < bayoucfg.n_entries; i++) { - struct bpt_pentry *entry = (struct bpt_pentry *)ptr; - struct payload *p = &(bayoucfg.entries[i]); - int plen; - u8 *params = NULL; - - memcpy(&p->pentry, entry, sizeof(struct bpt_pentry)); - - if (entry->type != BPT_TYPE_CHAIN) { - char *lname = (char *)ptr + sizeof(struct bpt_pentry); - - if (larstat(lar, (const char *)lname, &p->stat)) - build_dummy_table(lar); - - if (!lfverify(lar, (const char *)lname)) - build_dummy_table(lar); - - fptr = larfptr(lar, (const char *)lname); - - if (verify_self(fptr)) - p->fptr = fptr; - else - build_dummy_table(lar); - - plen = self_get_params(fptr, &params); - payload_parse_params(p, params, plen); - } - - ptr += sizeof(struct bpt_pentry) + entry->nlen; - } - - return 0; -} diff --git a/payloads/bayou/lzma.c b/payloads/bayou/lzma.c deleted file mode 100644 index 14bd921..0000000 --- a/payloads/bayou/lzma.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - -coreboot interface to memory-saving variant of LZMA decoder - -(C)opyright 2006 Carl-Daniel Hailfinger -Released under the GNU GPL v2 or later - -Parts of this file are based on C/7zip/Compress/LZMA_C/LzmaTest.c from the LZMA -SDK 4.42, which is written and distributed to public domain by Igor Pavlov. - -*/ - -#include <libpayload.h> -#include "lzmadecode.c" - -unsigned long ulzma(u8 *src, u8 *dst) -{ - unsigned char properties[LZMA_PROPERTIES_SIZE]; - UInt32 outSize; - SizeT inProcessed; - SizeT outProcessed; - int res; - CLzmaDecoderState state; - SizeT mallocneeds; - unsigned char scratchpad[15980]; - - memcpy(properties, src, LZMA_PROPERTIES_SIZE); - outSize = *(UInt32 *)(src + LZMA_PROPERTIES_SIZE); - if (LzmaDecodeProperties(&state.Properties, properties, LZMA_PROPERTIES_SIZE) != LZMA_RESULT_OK) { - printf("Incorrect stream properties\n"); - } - mallocneeds = (LzmaGetNumProbs(&state.Properties) * sizeof(CProb)); - if (mallocneeds > 15980) { - printf("Decoder scratchpad too small!\n"); - } - state.Probs = (CProb *)scratchpad; - res = LzmaDecode(&state, src + LZMA_PROPERTIES_SIZE + 8, (SizeT)0xffffffff, &inProcessed, - dst, outSize, &outProcessed); - if (res != 0) { - printf("Decoding error = %d\n", res); - } - return outSize; -} diff --git a/payloads/bayou/lzmadecode.c b/payloads/bayou/lzmadecode.c deleted file mode 100644 index b03415f..0000000 --- a/payloads/bayou/lzmadecode.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "lzmadecode.h" - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) -{ - unsigned char prop0; - if (size < LZMA_PROPERTIES_SIZE) - return LZMA_RESULT_DATA_ERROR; - prop0 = propsData[0]; - if (prop0 >= (9 * 5 * 5)) - return LZMA_RESULT_DATA_ERROR; - { - for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); - for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); - propsRes->lc = prop0; - /* - unsigned char remainder = (unsigned char)(prop0 / 9); - propsRes->lc = prop0 % 9; - propsRes->pb = remainder / 5; - propsRes->lp = remainder % 5; - */ - } - - return LZMA_RESULT_OK; -} - -#define kLzmaStreamWasFinishedId (-1) - -int LzmaDecode(CLzmaDecoderState *vs, - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) -{ - CProb *p = vs->Probs; - SizeT nowPos = 0; - Byte previousByte = 0; - UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; - UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; - int lc = vs->Properties.lc; - - - int state = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - int len = 0; - const Byte *Buffer; - const Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - *inSizeProcessed = 0; - *outSizeProcessed = 0; - - { - UInt32 i; - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - } - - RC_INIT(inStream, inSize); - - - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - matchByte = outStream[nowPos - rep0]; - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - UpdateBit0(prob); - - if (nowPos == 0) - return LZMA_RESULT_DATA_ERROR; - - state = state < kNumLitStates ? 9 : 11; - previousByte = outStream[nowPos - rep0]; - outStream[nowPos++] = previousByte; - - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = kLzmaStreamWasFinishedId; - break; - } - } - - len += kMatchMinLen; - if (rep0 > nowPos) - return LZMA_RESULT_DATA_ERROR; - - - do - { - previousByte = outStream[nowPos - rep0]; - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - - *inSizeProcessed = (SizeT)(Buffer - inStream); - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/payloads/bayou/lzmadecode.h b/payloads/bayou/lzmadecode.h deleted file mode 100644 index 3771245..0000000 --- a/payloads/bayou/lzmadecode.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef LZMADECODE_H -#define LZMADECODE_H - -typedef unsigned char Byte; -typedef unsigned short UInt16; -typedef unsigned int UInt32; -typedef UInt32 SizeT; - -#define CProb UInt16 - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -#define LZMA_PROPERTIES_SIZE 5 - -typedef struct _CLzmaProperties -{ - int lc; - int lp; - int pb; -}CLzmaProperties; - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); - -#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) - -#define kLzmaNeedInitId (-2) - -typedef struct _CLzmaDecoderState -{ - CLzmaProperties Properties; - CProb *Probs; - - -} CLzmaDecoderState; - - -int LzmaDecode(CLzmaDecoderState *vs, - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); - -#endif /* LZMADECODE_H */ diff --git a/payloads/bayou/main.c b/payloads/bayou/main.c deleted file mode 100644 index cdccea1..0000000 --- a/payloads/bayou/main.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" - -static void print_banner(void) -{ - printf("\e[H\e[JBayou Payload Chooser v0.3\n"); -} - -int main(void) -{ - extern unsigned long _binary_builtin_lar_start; - struct LAR *lar; - - print_banner(); - - lar = openlar((void *)&_binary_builtin_lar_start); - - if (lar == NULL) { - printf("[CHOOSER]: Unable to scan the attached LAR file\n"); - return -1; - } - - get_configuration(lar); - - if (bayoucfg.n_entries == 0) { - printf("[CHOOSER]: No payloads were found in the LAR\n"); - return -1; - } - - /* - * If timeout == 0xFF, then show the menu immediately. - * If timeout is zero, then find and run the default item immediately. - * If there is no default item, then show the menu. - * If timeout is anything else, then show a message and wait for a - * keystroke. If there is no keystroke in time then run the default. - * If there is no default then show the menu. - */ - if (bayoucfg.timeout != 0xFF) { - struct payload *d = payload_get_default(); - - if (d != NULL) { - if (bayoucfg.timeout == 0) - run_payload(d); - else - run_payload_timeout(d, bayoucfg.timeout); - } - } - - menu(); - - return 0; -} diff --git a/payloads/bayou/menu.c b/payloads/bayou/menu.c deleted file mode 100644 index 0d312ca..0000000 --- a/payloads/bayou/menu.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <libpayload.h> -#include <curses.h> -#include "bayou.h" - -#define SCREEN_X 80 -#define SCREEN_Y 25 - -static int menu_width = 0; -static struct payload *mpayloads[BAYOU_MAX_ENTRIES]; -static int m_entries = 0; -static unsigned int selected = 0; -static WINDOW *menuwin, *status; - -void create_menu(void) -{ - int i; - - for (i = 0; i < bayoucfg.n_entries; i++) { - struct payload *p = &(bayoucfg.entries[i]); - char *name; - - if ((p->pentry.parent != 0) || - (p->pentry.flags & BPT_FLAG_NOSHOW)) - continue; - - mpayloads[m_entries++] = p; - - name = payload_get_name(p); - - if (strlen(name) > menu_width) - menu_width = strlen(name); - } - - menu_width += 4; - - if (menu_width < 30) - menu_width = 30; - - menuwin = newwin(m_entries + 3, menu_width, - (SCREEN_Y - (m_entries + 3)) / 2, - (SCREEN_X - menu_width) / 2); -} - -void draw_menu(void) -{ - struct payload *s; - int i; - - wattrset(menuwin, COLOR_PAIR(3)); - wclear(menuwin); - wborder(menuwin, ACS_VLINE, ACS_VLINE, ACS_HLINE, ACS_HLINE, - ACS_ULCORNER, ACS_URCORNER, ACS_LLCORNER, ACS_LRCORNER); - - wattrset(menuwin, COLOR_PAIR(4) | A_BOLD); - mvwprintw(menuwin, 0, (menu_width - 17) / 2, " Payload Chooser "); - - wattrset(menuwin, COLOR_PAIR(3)); - - for (i = 0; i < m_entries; i++) { - char *name = payload_get_name(mpayloads[i]); - int col = (menu_width - (2 + strlen(name))) / 2; - - if (i == selected) - wattrset(menuwin, COLOR_PAIR(5) | A_BOLD); - else - wattrset(menuwin, COLOR_PAIR(3)); - - mvwprintw(menuwin, 2 + i, col, name); - } - - s = mpayloads[selected]; - - wclear(status); - - if (s->params[BAYOU_PARAM_DESC] != NULL) { - char buf[66]; - int len = strnlen(s->params[BAYOU_PARAM_DESC], 65); - - snprintf(buf, 65, s->params[BAYOU_PARAM_DESC]); - buf[65] = 0; - - mvwprintw(status, 0, (80 - len) / 2, buf); - } - - wrefresh(menuwin); - wrefresh(status); -} - -void loop(void) -{ - int key; - - while (1) { - key = getch(); - - if (key == ERR) - continue; - - if (key == KEY_DOWN) - selected = (selected + 1) % m_entries; - else if (key == KEY_UP) - selected = (selected - 1) % m_entries; - else if (key == KEY_ENTER) { - run_payload(mpayloads[selected]); - clear(); - refresh(); - } else - continue; - - draw_menu(); - } -} - -void menu(void) -{ - initscr(); - - init_pair(1, COLOR_WHITE, COLOR_RED); - init_pair(2, COLOR_BLACK, COLOR_WHITE); - init_pair(3, COLOR_BLACK, COLOR_WHITE); - init_pair(4, COLOR_CYAN, COLOR_WHITE); - init_pair(5, COLOR_WHITE, COLOR_RED); - - wattrset(stdscr, COLOR_PAIR(1)); - wclear(stdscr); - - status = newwin(1, 80, 24, 0); - wattrset(status, COLOR_PAIR(2)); - wclear(status); - - refresh(); - - create_menu(); - draw_menu(); - - loop(); -} diff --git a/payloads/bayou/nrv2b.c b/payloads/bayou/nrv2b.c deleted file mode 100644 index 53f7988..0000000 --- a/payloads/bayou/nrv2b.c +++ /dev/null @@ -1,86 +0,0 @@ -#include <libpayload.h> - -// This GETBIT is supposed to work on little endian -// 32bit systems. The algorithm will definitely need -// some fixing on other systems, but it might not be -// a problem since the nrv2b binary behaves the same.. - -#ifndef ENDIAN -#define ENDIAN 0 -#endif -#ifndef BITSIZE -#define BITSIZE 32 -#endif - -#define GETBIT_8(bb, src, ilen) \ - (((bb = bb & 0x7f ? bb*2 : ((unsigned)src[ilen++]*2+1)) >> 8) & 1) - -#define GETBIT_LE16(bb, src, ilen) \ - (bb*=2,bb&0xffff ? (bb>>16)&1 : (ilen+=2,((bb=(src[ilen-2]+src[ilen-1]*256u)*2+1)>>16)&1)) -#define GETBIT_LE32(bb, src, ilen) \ - (bc > 0 ? ((bb>>--bc)&1) : (bc=31,\ - bb=*(const u32 *)((src)+ilen),ilen+=4,(bb>>31)&1)) - -#if ENDIAN == 0 && BITSIZE == 8 -#define GETBIT(bb, src, ilen) GETBIT_8(bb, src, ilen) -#endif -#if ENDIAN == 0 && BITSIZE == 16 -#define GETBIT(bb, src, ilen) GETBIT_LE16(bb, src, ilen) -#endif -#if ENDIAN == 0 && BITSIZE == 32 -#define GETBIT(bb, src, ilen) GETBIT_LE32(bb, src, ilen) -#endif - -unsigned long unrv2b(u8 *src, u8 *dst, unsigned long *ilen_p) -{ - unsigned long ilen = 0, olen = 0, last_m_off = 1; - u32 bb = 0; - unsigned bc = 0; - const u8 *m_pos; - - // skip length - src += 4; - /* FIXME: check olen with the length stored in first 4 bytes */ - - for (;;) { - unsigned int m_off, m_len; - while (GETBIT(bb, src, ilen)) { - dst[olen++] = src[ilen++]; - } - - m_off = 1; - do { - m_off = m_off * 2 + GETBIT(bb, src, ilen); - } while (!GETBIT(bb, src, ilen)); - if (m_off == 2) { - m_off = last_m_off; - } else { - m_off = (m_off - 3) * 256 + src[ilen++]; - if (m_off == 0xffffffffU) - break; - last_m_off = ++m_off; - } - - m_len = GETBIT(bb, src, ilen); - m_len = m_len * 2 + GETBIT(bb, src, ilen); - if (m_len == 0) { - m_len++; - do { - m_len = m_len * 2 + GETBIT(bb, src, ilen); - } while (!GETBIT(bb, src, ilen)); - m_len += 2; - } - m_len += (m_off > 0xd00); - - m_pos = dst + olen - m_off; - dst[olen++] = *m_pos++; - do { - dst[olen++] = *m_pos++; - } while (--m_len > 0); - } - - *ilen_p = ilen; - - return olen; - -} diff --git a/payloads/bayou/payload.c b/payloads/bayou/payload.c deleted file mode 100644 index a76e49f..0000000 --- a/payloads/bayou/payload.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" - -#define TIMEOUT_MESSAGE "Press ESC for the menu (%2d)...\r" -#define TIMEOUT_KEY '\033' - -void run_payload(struct payload *p) -{ - int ret, i; - - /* For chooser entries, just run the payload. */ - if (p->pentry.type == BPT_TYPE_CHOOSER) { - self_load_and_run(p, &ret); - return; - } - - /* For chained entries, run all the sub-chain items. */ - for (i = 0; i < bayoucfg.n_entries; i++) { - struct payload *s = &(bayoucfg.entries[i]); - - if (s->pentry.parent == p->pentry.index) - self_load_and_run(s, &ret); - } -} - -char *payload_get_name(struct payload *p) -{ - if (p->pentry.type == BPT_TYPE_CHAIN) - return (char *)p->pentry.title; - else if (p->pentry.type == BPT_TYPE_CHOOSER) { - if (p->pentry.title[0] != 0) - return (char *)p->pentry.title; - return p->params[BAYOU_PARAM_DESC]; - } - - return NULL; -} - -struct payload *payload_get_default(void) -{ - int i; - - for (i = 0; i < bayoucfg.n_entries; i++) { - struct payload *s = &(bayoucfg.entries[i]); - - if (s->pentry.parent == 0 && s->pentry.flags & BPT_FLAG_DEFAULT) - return s; - } - - return NULL; -} - -void run_payload_timeout(struct payload *p, int timeout) -{ - int t, ch, tval; - - for (t = timeout; t >= 0; t--) { - printf(TIMEOUT_MESSAGE, t); - - tval = 1000; - ch = getchar_timeout(&tval); - - if (ch == TIMEOUT_KEY) - return; - } - - run_payload(p); -} - -void payload_parse_params(struct payload *pload, u8 *params, int len) -{ - char *ptr = (char *)params; - int i = 0; - - if (ptr == NULL) - return; - - while (ptr < ((char *)params + len)) { - - if (!strncmp(ptr, "name=", 5)) { - pload->params[BAYOU_PARAM_NAME] = ptr + 5; - } else if (!strncmp(ptr, "desc=", 5)) { - pload->params[BAYOU_PARAM_DESC] = ptr + 5; - } else if (!strncmp(ptr, "listname=", 9)) { - pload->params[BAYOU_PARAM_LIST] = ptr + 9; - } - - ptr += strnlen(ptr, len - i); - - if (ptr < ((char *)params + len) && *ptr == 0) - ptr++; - } -} diff --git a/payloads/bayou/self.c b/payloads/bayou/self.c deleted file mode 100644 index 88e495b17..0000000 --- a/payloads/bayou/self.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" -#include "self.h" - -static int nop_decompress(void *dst, void *src, int len) -{ - memcpy(dst, src, len); - return len; -} - -#ifdef CONFIG_LZMA -extern int ulzma(u8 *, u8 *); - -static int lzma_decompress(void *dst, void *src, int len) -{ - return ulzma((u8 *) src, (u8 *) dst); -} -#endif - -#ifdef CONFIG_NRV2B -extern int unrv2b(u8 *, u8 *, unsigned long *); - -static int nrv2b_decompress(void *dst, void *src, int len) -{ - unsigned long l = (u32) len; - return unrv2b(src, dst, &l); -} -#endif - -static int zeros_decompress(void *dst, void *src, int len) -{ - memset(dst, 0, len); - return len; -} - -int self_get_params(u8 *fptr, u8 **params) -{ - struct self_segment *seg = (struct self_segment *)fptr; - - while (seg->type != SELF_TYPE_ENTRY) { - if (seg->type == 0) - return -1; - - if (seg->type == SELF_TYPE_PARAMS) { - *params = (u8 *) (fptr + seg->offset); - return seg->len; - } - - seg++; - } - - *params = NULL; - - return 0; -} - -int verify_self(u8 *ptr) -{ - struct self_segment *seg = (struct self_segment *)ptr; - - switch (seg->type) { - case SELF_TYPE_CODE: - case SELF_TYPE_DATA: - case SELF_TYPE_BSS: - case SELF_TYPE_PARAMS: - case SELF_TYPE_ENTRY: - return 1; - } - - return 0; -} - -int self_load_and_run(struct payload *p, int *ret) -{ - struct self_segment *seg = (struct self_segment *)p->fptr; - int (*dcmp) (void *, void *, int); - int dlen; - - switch (p->stat.compression) { -#ifdef CONFIG_LZMA - case ALGO_LZMA: - dcmp = lzma_decompress; - break; -#endif -#ifdef CONFIG_NRV2B - case ALGO_NRV2B: - dcmp = nrv2b_decompress; - break; -#endif - case ALGO_ZEROES: - dcmp = zeros_decompress; - break; - case ALGO_NONE: - dcmp = nop_decompress; - default: - printf("E: Unsupported decompression type\n"); - return -1; - } - - while (1) { - u32 laddr = (u32) (seg->load_addr & 0xFFFFFFFF); - - switch (seg->type) { - case SELF_TYPE_CODE: - case SELF_TYPE_DATA: - dlen = dcmp((void *)laddr, - (void *)p->fptr + seg->offset, seg->len); - - if (dlen < seg->mem_len) { - memset((void *)(laddr + dlen), 0, - seg->mem_len - dlen); - } - break; - - case SELF_TYPE_BSS: - memset((void *)laddr, 0, seg->len); - break; - case SELF_TYPE_ENTRY: - *ret = exec(laddr, 0, NULL); - return 0; - default: - break; - } - - seg++; - } - - return -1; -} diff --git a/payloads/bayou/self.h b/payloads/bayou/self.h deleted file mode 100644 index a341899..0000000 --- a/payloads/bayou/self.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef SELF_H_ -#define SELF_H_ - -#include <libpayload.h> - -struct self_segment { - u32 type; - u32 offset; - u64 load_addr; - u32 len; - u32 mem_len; -}; - -struct self { - struct larstat stat; - void *fptr; -}; - -#define SELF_TYPE_CODE 0x45444F43 -#define SELF_TYPE_DATA 0x41544144 -#define SELF_TYPE_BSS 0x20535342 -#define SELF_TYPE_PARAMS 0x41524150 -#define SELF_TYPE_ENTRY 0x52544E45 - -#endif -- To view, visit https://review.coreboot.org/c/coreboot/+/34565 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Icfb18b88e460a4e4b538b7efe907d4eef6c40638 Gerrit-Change-Number: 34565 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

5 11

Change in ...coreboot[master]: riscv: add smp support for exception handle
by Xiang Wang (Code Review) 04 Dec '19

04 Dec '19

Xiang Wang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33656 Change subject: riscv: add smp support for exception handle ...................................................................... riscv: add smp support for exception handle Change-Id: I637b3b3047d2c0e12842499fe61f740d0daf489f Signed-off-by: Xiang Wang <wxjstz(a)126.com> --- M src/arch/riscv/payload.c M src/arch/riscv/trap_util.S 2 files changed, 104 insertions(+), 111 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/56/33656/1 diff --git a/src/arch/riscv/payload.c b/src/arch/riscv/payload.c index f3ed5a4..cfb84f2 100644 --- a/src/arch/riscv/payload.c +++ b/src/arch/riscv/payload.c @@ -19,6 +19,7 @@ #include <arch/boot.h> #include <arch/encoding.h> #include <console/console.h> +#include <mcall.h> void run_payload(struct prog *prog, void *fdt, int payload_mode) { @@ -40,6 +41,7 @@ die("wrong privilege level for payload"); break; } + write_csr(mscratch, MACHINE_STACK_TOP()); write_csr(mstatus, status); write_csr(mepc, doit); asm volatile( diff --git a/src/arch/riscv/trap_util.S b/src/arch/riscv/trap_util.S index 8aba48b..67e917c 100644 --- a/src/arch/riscv/trap_util.S +++ b/src/arch/riscv/trap_util.S @@ -18,124 +18,115 @@ #include <mcall.h> .macro restore_regs - # restore x registers - LOAD x1,1*REGBYTES(a0) - LOAD x2,2*REGBYTES(a0) - LOAD x3,3*REGBYTES(a0) - LOAD x4,4*REGBYTES(a0) - LOAD x5,5*REGBYTES(a0) - LOAD x6,6*REGBYTES(a0) - LOAD x7,7*REGBYTES(a0) - LOAD x8,8*REGBYTES(a0) - LOAD x9,9*REGBYTES(a0) - LOAD x11,11*REGBYTES(a0) - LOAD x12,12*REGBYTES(a0) - LOAD x13,13*REGBYTES(a0) - LOAD x14,14*REGBYTES(a0) - LOAD x15,15*REGBYTES(a0) - LOAD x16,16*REGBYTES(a0) - LOAD x17,17*REGBYTES(a0) - LOAD x18,18*REGBYTES(a0) - LOAD x19,19*REGBYTES(a0) - LOAD x20,20*REGBYTES(a0) - LOAD x21,21*REGBYTES(a0) - LOAD x22,22*REGBYTES(a0) - LOAD x23,23*REGBYTES(a0) - LOAD x24,24*REGBYTES(a0) - LOAD x25,25*REGBYTES(a0) - LOAD x26,26*REGBYTES(a0) - LOAD x27,27*REGBYTES(a0) - LOAD x28,28*REGBYTES(a0) - LOAD x29,29*REGBYTES(a0) - LOAD x30,30*REGBYTES(a0) - LOAD x31,31*REGBYTES(a0) - # restore a0 last - LOAD x10,10*REGBYTES(a0) + # restore x registers + LOAD x1, 1 * REGBYTES(sp) + LOAD x3, 3 * REGBYTES(sp) + LOAD x4, 4 * REGBYTES(sp) + LOAD x5, 5 * REGBYTES(sp) + LOAD x6, 6 * REGBYTES(sp) + LOAD x7, 7 * REGBYTES(sp) + LOAD x8, 8 * REGBYTES(sp) + LOAD x9, 9 * REGBYTES(sp) + LOAD x10, 10 * REGBYTES(sp) + LOAD x11, 11 * REGBYTES(sp) + LOAD x12, 12 * REGBYTES(sp) + LOAD x13, 13 * REGBYTES(sp) + LOAD x14, 14 * REGBYTES(sp) + LOAD x15, 15 * REGBYTES(sp) + LOAD x16, 16 * REGBYTES(sp) + LOAD x17, 17 * REGBYTES(sp) + LOAD x18, 18 * REGBYTES(sp) + LOAD x19, 19 * REGBYTES(sp) + LOAD x20, 20 * REGBYTES(sp) + LOAD x21, 21 * REGBYTES(sp) + LOAD x22, 22 * REGBYTES(sp) + LOAD x23, 23 * REGBYTES(sp) + LOAD x24, 24 * REGBYTES(sp) + LOAD x25, 25 * REGBYTES(sp) + LOAD x26, 26 * REGBYTES(sp) + LOAD x27, 27 * REGBYTES(sp) + LOAD x28, 28 * REGBYTES(sp) + LOAD x29, 29 * REGBYTES(sp) + LOAD x30, 30 * REGBYTES(sp) + LOAD x31, 31 * REGBYTES(sp) +.endm - - .endm .macro save_tf - # save gprs - STORE x1,1*REGBYTES(x2) - STORE x3,3*REGBYTES(x2) - STORE x4,4*REGBYTES(x2) - STORE x5,5*REGBYTES(x2) - STORE x6,6*REGBYTES(x2) - STORE x7,7*REGBYTES(x2) - STORE x8,8*REGBYTES(x2) - STORE x9,9*REGBYTES(x2) - STORE x10,10*REGBYTES(x2) - STORE x11,11*REGBYTES(x2) - STORE x12,12*REGBYTES(x2) - STORE x13,13*REGBYTES(x2) - STORE x14,14*REGBYTES(x2) - STORE x15,15*REGBYTES(x2) - STORE x16,16*REGBYTES(x2) - STORE x17,17*REGBYTES(x2) - STORE x18,18*REGBYTES(x2) - STORE x19,19*REGBYTES(x2) - STORE x20,20*REGBYTES(x2) - STORE x21,21*REGBYTES(x2) - STORE x22,22*REGBYTES(x2) - STORE x23,23*REGBYTES(x2) - STORE x24,24*REGBYTES(x2) - STORE x25,25*REGBYTES(x2) - STORE x26,26*REGBYTES(x2) - STORE x27,27*REGBYTES(x2) - STORE x28,28*REGBYTES(x2) - STORE x29,29*REGBYTES(x2) - STORE x30,30*REGBYTES(x2) - STORE x31,31*REGBYTES(x2) + # save gprs + STORE x1, 1 * REGBYTES(sp) + STORE x3, 3 * REGBYTES(sp) + STORE x4, 4 * REGBYTES(sp) + STORE x5, 5 * REGBYTES(sp) + STORE x6, 6 * REGBYTES(sp) + STORE x7, 7 * REGBYTES(sp) + STORE x8, 8 * REGBYTES(sp) + STORE x9, 9 * REGBYTES(sp) + STORE x10, 10 * REGBYTES(sp) + STORE x11, 11 * REGBYTES(sp) + STORE x12, 12 * REGBYTES(sp) + STORE x13, 13 * REGBYTES(sp) + STORE x14, 14 * REGBYTES(sp) + STORE x15, 15 * REGBYTES(sp) + STORE x16, 16 * REGBYTES(sp) + STORE x17, 17 * REGBYTES(sp) + STORE x18, 18 * REGBYTES(sp) + STORE x19, 19 * REGBYTES(sp) + STORE x20, 20 * REGBYTES(sp) + STORE x21, 21 * REGBYTES(sp) + STORE x22, 22 * REGBYTES(sp) + STORE x23, 23 * REGBYTES(sp) + STORE x24, 24 * REGBYTES(sp) + STORE x25, 25 * REGBYTES(sp) + STORE x26, 26 * REGBYTES(sp) + STORE x27, 27 * REGBYTES(sp) + STORE x28, 28 * REGBYTES(sp) + STORE x29, 29 * REGBYTES(sp) + STORE x30, 30 * REGBYTES(sp) + STORE x31, 31 * REGBYTES(sp) - # get sr, epc, badvaddr, cause - csrrw t0,mscratch,x0 - csrr s0,mstatus - csrr t1,mepc - csrr t2,mbadaddr - csrr t3,mcause - STORE t0,2*REGBYTES(x2) - STORE s0,32*REGBYTES(x2) - STORE t1,33*REGBYTES(x2) - STORE t2,34*REGBYTES(x2) - STORE t3,35*REGBYTES(x2) + # get sr, epc, badvaddr, cause + csrr t0, mscratch + bnez t0, 1f # t0 == 0, trap come from current program + # t0 != 0, t0 is saved old sp + add t0, sp, MENTRY_FRAME_SIZE +1: + csrr s0, mstatus + csrr t1, mepc + csrr t2, mbadaddr + csrr t3, mcause + STORE t0, 2 * REGBYTES(sp) + STORE s0, 32 * REGBYTES(sp) + STORE t1, 33 * REGBYTES(sp) + STORE t2, 34 * REGBYTES(sp) + STORE t3, 35 * REGBYTES(sp) - # get faulting insn, if it wasn't a fetch-related trap - li x5,-1 - STORE x5,36*REGBYTES(x2) + # get faulting insn, if it wasn't a fetch-related trap + li x5, -1 + STORE x5, 36 * REGBYTES(sp) +.endm - .endm - -.globl estack - .text - - .global trap_entry - .align 2 # four byte alignment, as required by mtvec + .text + .global trap_entry + # four byte alignment, as required by mtvec + .align 2 trap_entry: - csrw mscratch, sp + # mscratch is initialized to 0 + # when exiting coreboot, write sp to mscratch + csrrw sp, mscratch, sp + bnez sp, 1f # sp == 0, trap come from current program + csrrw sp, mscratch, sp +1: + addi sp, sp, -MENTRY_FRAME_SIZE + save_tf - # SMP isn't supported yet, to avoid overwriting the same stack with different - # harts that handle traps at the same time. - # someday this gets fixed. - //csrr sp, mhartid - csrr sp, 0xf14 -.Lsmp_hang: - bnez sp, .Lsmp_hang + mv a0, sp + jal trap_handler - # Use a different stack than in the main context, to to avoid overwriting - # stack data. - # TODO: Maybe use the old stack pointer (plus an offset) instead. But only if - # the previous mode was M, because it would be a very bad idea to use a stack - # pointer provided by unprivileged code! - la sp, _estack - addi sp, sp, -2048 # 2 KiB is half of the stack space - addi sp, sp, -MENTRY_FRAME_SIZE - - save_tf - move a0,sp - jal trap_handler - -trap_return: - csrr a0, mscratch restore_regs - # go back to the previous mode + addi sp, sp, MENTRY_FRAME_SIZE + + csrrw sp, mscratch, sp + bnez sp, 1f + csrrw sp, mscratch, sp +1: mret -- To view, visit https://review.coreboot.org/c/coreboot/+/33656 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I637b3b3047d2c0e12842499fe61f740d0daf489f Gerrit-Change-Number: 33656 Gerrit-PatchSet: 1 Gerrit-Owner: Xiang Wang <wxjstz(a)126.com> Gerrit-MessageType: newchange

3 9

Change in ...coreboot[master]: mb/intel/tglrvp: Add Place holder for Tigerlake RVP
by Wonkyu Kim (Code Review) 04 Dec '19

04 Dec '19

Wonkyu Kim has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33567 Change subject: mb/intel/tglrvp: Add Place holder for Tigerlake RVP ...................................................................... mb/intel/tglrvp: Add Place holder for Tigerlake RVP Add place holder with ICL code and tglrvp folder. tglrvp code will be add more. Change-Id: I9cec7925594ff4c60154723e1ffa561d01b5153f Signed-off-by: Wonkyu Kim <wonkyu.kim(a)intel.com> --- A src/mainboard/intel/tglrvp/Kconfig A src/mainboard/intel/tglrvp/Kconfig.name A src/mainboard/intel/tglrvp/Makefile.inc A src/mainboard/intel/tglrvp/acpi/mainboard.asl A src/mainboard/intel/tglrvp/acpi_tables.c A src/mainboard/intel/tglrvp/board_id.c A src/mainboard/intel/tglrvp/board_id.h A src/mainboard/intel/tglrvp/board_info.txt A src/mainboard/intel/tglrvp/bootblock.c A src/mainboard/intel/tglrvp/chromeos.c A src/mainboard/intel/tglrvp/chromeos.fmd A src/mainboard/intel/tglrvp/dsdt.asl A src/mainboard/intel/tglrvp/hda_verb.c A src/mainboard/intel/tglrvp/mainboard.c A src/mainboard/intel/tglrvp/romstage_fsp_params.c A src/mainboard/intel/tglrvp/spd/Makefile.inc A src/mainboard/intel/tglrvp/spd/empty.spd.hex A src/mainboard/intel/tglrvp/spd/samsung_K4F6E304HBMGCJ.spd.hex A src/mainboard/intel/tglrvp/spd/spd.h A src/mainboard/intel/tglrvp/spd/spd_util.c A src/mainboard/intel/tglrvp/variants/baseboard/Makefile.inc A src/mainboard/intel/tglrvp/variants/baseboard/gpio.c A src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/ec.h A src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/gpio.h A src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/variants.h A src/mainboard/intel/tglrvp/variants/icl_u/Makefile.inc A src/mainboard/intel/tglrvp/variants/icl_u/devicetree.cb A src/mainboard/intel/tglrvp/variants/icl_u/gpio.c A src/mainboard/intel/tglrvp/variants/icl_u/include/variant/ec.h A src/mainboard/intel/tglrvp/variants/icl_u/include/variant/gpio.h A src/mainboard/intel/tglrvp/variants/icl_u/include/variant/hda_verb.h A src/mainboard/intel/tglrvp/variants/icl_y/Makefile.inc A src/mainboard/intel/tglrvp/variants/icl_y/devicetree.cb A src/mainboard/intel/tglrvp/variants/icl_y/gpio.c A src/mainboard/intel/tglrvp/variants/icl_y/include/variant/ec.h A src/mainboard/intel/tglrvp/variants/icl_y/include/variant/gpio.h A src/mainboard/intel/tglrvp/variants/icl_y/include/variant/hda_verb.h 37 files changed, 3,531 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/67/33567/1 diff --git a/src/mainboard/intel/tglrvp/Kconfig b/src/mainboard/intel/tglrvp/Kconfig new file mode 100755 index 0000000..728a532 --- /dev/null +++ b/src/mainboard/intel/tglrvp/Kconfig @@ -0,0 +1,60 @@ +if BOARD_INTEL_ICELAKE_RVPU || BOARD_INTEL_ICELAKE_RVPY + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_16384 + select EC_ACPI + select GENERIC_SPD_BIN + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select MAINBOARD_HAS_CHROMEOS + select GENERIC_SPD_BIN + select DRIVERS_I2C_HID + select DRIVERS_I2C_GENERIC + select DRIVERS_USB_ACPI + select SOC_INTEL_COMMON_BLOCK_HDA_VERB + select SOC_INTEL_ICELAKE + select MAINBOARD_USES_IFD_EC_REGION + select INTEL_LPSS_UART_FOR_CONSOLE + +config MAINBOARD_DIR + string + default "intel/icelake_rvp" + +config VARIANT_DIR + string + default "icl_u" if BOARD_INTEL_ICELAKE_RVPU + default "icl_y" if BOARD_INTEL_ICELAKE_RVPY + +config MAINBOARD_PART_NUMBER + string + default "Icelake RVP" + +config MAINBOARD_VENDOR + string + default "Intel" + +config MAINBOARD_FAMILY + string + default "Intel_icelake_rvp" + +config MAX_CPUS + int + default 8 + +config DEVICETREE + string + default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb" + +config DIMM_SPD_SIZE + int + default 512 + +config VBOOT + select VBOOT_LID_SWITCH + select VBOOT_MOCK_SECDATA + +config UART_FOR_CONSOLE + int + default 2 +endif diff --git a/src/mainboard/intel/tglrvp/Kconfig.name b/src/mainboard/intel/tglrvp/Kconfig.name new file mode 100755 index 0000000..9ba17a6 --- /dev/null +++ b/src/mainboard/intel/tglrvp/Kconfig.name @@ -0,0 +1,4 @@ +config BOARD_INTEL_ICELAKE_RVPU + bool "Icelake U DDR4/LPDDR4 RVP" +config BOARD_INTEL_ICELAKE_RVPY + bool "Icelake Y LPDDR4 RVP" diff --git a/src/mainboard/intel/tglrvp/Makefile.inc b/src/mainboard/intel/tglrvp/Makefile.inc new file mode 100755 index 0000000..7e74f09 --- /dev/null +++ b/src/mainboard/intel/tglrvp/Makefile.inc @@ -0,0 +1,36 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2018 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +subdirs-y += spd + +bootblock-y += bootblock.c +bootblock-$(CONFIG_CHROMEOS) += chromeos.c + +verstage-$(CONFIG_CHROMEOS) += chromeos.c + +romstage-$(CONFIG_CHROMEOS) += chromeos.c +romstage-y += romstage_fsp_params.c +romstage-y += board_id.c + +ramstage-$(CONFIG_CHROMEOS) += chromeos.c +ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_HDA_VERB) += hda_verb.c +ramstage-y += mainboard.c +ramstage-y += board_id.c + +subdirs-y += variants/baseboard +CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/baseboard/include + +subdirs-y += variants/$(VARIANT_DIR) +CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include diff --git a/src/mainboard/intel/tglrvp/acpi/mainboard.asl b/src/mainboard/intel/tglrvp/acpi/mainboard.asl new file mode 100755 index 0000000..ef2e164 --- /dev/null +++ b/src/mainboard/intel/tglrvp/acpi/mainboard.asl @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if CONFIG(EC_GOOGLE_CHROMEEC) +Scope (\_SB) +{ + Device (PWRB) + { + Name (_HID, EisaId ("PNP0C0C")) + } +} +#endif diff --git a/src/mainboard/intel/tglrvp/acpi_tables.c b/src/mainboard/intel/tglrvp/acpi_tables.c new file mode 100755 index 0000000..3b44754 --- /dev/null +++ b/src/mainboard/intel/tglrvp/acpi_tables.c @@ -0,0 +1 @@ +/* Nothing here */ diff --git a/src/mainboard/intel/tglrvp/board_id.c b/src/mainboard/intel/tglrvp/board_id.c new file mode 100755 index 0000000..b56f047 --- /dev/null +++ b/src/mainboard/intel/tglrvp/board_id.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include "board_id.h" +#include <boardid.h> +#include <ec/acpi/ec.h> +#include <stdint.h> +#include <ec/google/chromeec/ec.h> + +static int get_board_id_via_ext_ec(void) +{ + uint32_t id = BOARD_ID_INIT; + + if (google_chromeec_get_board_version(&id)) + id = BOARD_ID_UNKNOWN; + + return id; +} + +/* Get Board ID via EC I/O port write/read */ +int get_board_id(void) +{ + MAYBE_STATIC int id = -1; + + if (id < 0) { + if (CONFIG(EC_GOOGLE_CHROMEEC)) + id = get_board_id_via_ext_ec(); + else{ + uint8_t buffer[2]; + uint8_t index; + if (send_ec_command(EC_FAB_ID_CMD) == 0) { + for (index = 0; index < sizeof(buffer); index++) + buffer[index] = recv_ec_data(); + id = (buffer[0] << 8) | buffer[1]; + } + } + } + + return id; +} diff --git a/src/mainboard/intel/tglrvp/board_id.h b/src/mainboard/intel/tglrvp/board_id.h new file mode 100755 index 0000000..3ccfe37 --- /dev/null +++ b/src/mainboard/intel/tglrvp/board_id.h @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MAINBOARD_BOARD_ID_H_ +#define _MAINBOARD_BOARD_ID_H_ + +/* Board/FAB ID Command */ +#define EC_FAB_ID_CMD 0x0D + +/* + * Returns board information (board id[15:8] and + * Fab info[7:0]) on success and < 0 on error + */ +int get_board_id(void); + +#endif /* _MAINBOARD_BOARD_ID_H_ */ diff --git a/src/mainboard/intel/tglrvp/board_info.txt b/src/mainboard/intel/tglrvp/board_info.txt new file mode 100755 index 0000000..48ec997 --- /dev/null +++ b/src/mainboard/intel/tglrvp/board_info.txt @@ -0,0 +1,6 @@ +Vendor name: Intel +Board name: Icelake rvp +Category: eval +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/intel/tglrvp/bootblock.c b/src/mainboard/intel/tglrvp/bootblock.c new file mode 100755 index 0000000..8655947 --- /dev/null +++ b/src/mainboard/intel/tglrvp/bootblock.c @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <baseboard/variants.h> +#include <bootblock_common.h> +#include <soc/gpio.h> +#include <variant/gpio.h> + +void bootblock_mainboard_init(void) +{ + const struct pad_config *pads; + size_t num; + + pads = variant_early_gpio_table(&num); + gpio_configure_pads(pads, num); +} diff --git a/src/mainboard/intel/tglrvp/chromeos.c b/src/mainboard/intel/tglrvp/chromeos.c new file mode 100755 index 0000000..ce8e548 --- /dev/null +++ b/src/mainboard/intel/tglrvp/chromeos.c @@ -0,0 +1,62 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +#include <baseboard/variants.h> +#include <gpio.h> +#include <soc/gpio.h> +#include <variant/gpio.h> +#include <vendorcode/google/chromeos/chromeos.h> + +#if ENV_RAMSTAGE +#include <boot/coreboot_tables.h> + +void fill_lb_gpios(struct lb_gpios *gpios) +{ + struct lb_gpio chromeos_gpios[] = { + {-1, ACTIVE_HIGH, get_write_protect_state(), "write protect"}, + {-1, ACTIVE_HIGH, get_lid_switch(), "lid"}, + {-1, ACTIVE_HIGH, 0, "power"}, + {-1, ACTIVE_HIGH, gfx_get_init_done(), "oprom"}, + }; + lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios)); +} +#endif /* ENV_RAMSTAGE */ + +int get_lid_switch(void) +{ + /* Lid always open */ + return 1; +} + +int get_recovery_mode_switch(void) +{ + return 0; +} + +int get_write_protect_state(void) +{ + /* No write protect */ + return 0; +} + +void mainboard_chromeos_acpi_generate(void) +{ + const struct cros_gpio *gpios; + size_t num; + + gpios = variant_cros_gpios(&num); + chromeos_acpi_gpio_generate(gpios, num); +} diff --git a/src/mainboard/intel/tglrvp/chromeos.fmd b/src/mainboard/intel/tglrvp/chromeos.fmd new file mode 100755 index 0000000..f4db8b4 --- /dev/null +++ b/src/mainboard/intel/tglrvp/chromeos.fmd @@ -0,0 +1,44 @@ +FLASH@0xff000000 0x1000000 { + SI_ALL@0x0 0x3F0000 { + SI_DESC@0x0 0x1000 + SI_EC@0x1000 0x80000 + SI_ME@0x81000 0x36F000 + } + SI_BIOS@0x400000 0xC00000 { + RW_SECTION_A@0x0 0x2d0000 { + VBLOCK_A@0x0 0x10000 + FW_MAIN_A(CBFS)@0x10000 0x2bffc0 + RW_FWID_A@0x2cffc0 0x40 + } + RW_SECTION_B@0x2d0000 0x2d0000 { + VBLOCK_B@0x0 0x10000 + FW_MAIN_B(CBFS)@0x10000 0x2bffc0 + RW_FWID_B@0x2cffc0 0x40 + } + RW_MISC@0x5a0000 0x30000 { + UNIFIED_MRC_CACHE@0x0 0x20000 { + RECOVERY_MRC_CACHE@0x0 0x10000 + RW_MRC_CACHE@0x10000 0x10000 + } + RW_ELOG(PRESERVE)@0x20000 0x4000 + RW_SHARED@0x24000 0x4000 { + SHARED_DATA@0x0 0x2000 + VBLOCK_DEV@0x2000 0x2000 + } + RW_VPD(PRESERVE)@0x28000 0x2000 + RW_NVRAM(PRESERVE)@0x2a000 0x6000 + } + SMMSTORE(PRESERVE)@0x5d0000 0x40000 + RW_LEGACY(CBFS)@0x610000 0x1c0000 + WP_RO@0x7d0000 0x430000 { + RO_VPD(PRESERVE)@0x0 0x4000 + RO_SECTION@0x4000 0x42c000 { + FMAP@0x0 0x800 + RO_FRID@0x800 0x40 + RO_FRID_PAD@0x840 0x7c0 + GBB@0x1000 0xef000 + COREBOOT(CBFS)@0xf0000 0x33c000 + } + } + } +} diff --git a/src/mainboard/intel/tglrvp/dsdt.asl b/src/mainboard/intel/tglrvp/dsdt.asl new file mode 100755 index 0000000..ad469fa --- /dev/null +++ b/src/mainboard/intel/tglrvp/dsdt.asl @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +#include "variant/ec.h" +#include "variant/gpio.h" + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include <soc/intel/icelake/acpi/platform.asl> + + // global NVS and variables + #include <soc/intel/icelake/acpi/globalnvs.asl> + + // CPU + #include <cpu/intel/common/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <soc/intel/icelake/acpi/northbridge.asl> + #include <soc/intel/icelake/acpi/southbridge.asl> + } + } + +#if CONFIG(CHROMEOS) + // Chrome OS specific + #include <vendorcode/google/chromeos/acpi/chromeos.asl> +#endif + +#if CONFIG(EC_GOOGLE_CHROMEEC) + /* Chrome OS Embedded Controller */ + Scope (\_SB.PCI0.LPCB) + { + /* ACPI code for EC SuperIO functions */ + #include <ec/google/chromeec/acpi/superio.asl> + /* ACPI code for EC functions */ + #include <ec/google/chromeec/acpi/ec.asl> + } +#endif + + // Chipset specific sleep states + #include <soc/intel/icelake/acpi/sleepstates.asl> + + // Mainboard specific + #include "acpi/mainboard.asl" + +} diff --git a/src/mainboard/intel/tglrvp/hda_verb.c b/src/mainboard/intel/tglrvp/hda_verb.c new file mode 100755 index 0000000..c87392d --- /dev/null +++ b/src/mainboard/intel/tglrvp/hda_verb.c @@ -0,0 +1,16 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "variant/hda_verb.h" diff --git a/src/mainboard/intel/tglrvp/mainboard.c b/src/mainboard/intel/tglrvp/mainboard.c new file mode 100755 index 0000000..36d6a3e --- /dev/null +++ b/src/mainboard/intel/tglrvp/mainboard.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +#include <baseboard/variants.h> +#include <device/device.h> +#include <soc/gpio.h> +#include <vendorcode/google/chromeos/chromeos.h> +#include <variant/gpio.h> + +static void mainboard_init(void *chip_info) +{ + const struct pad_config *pads; + size_t num; + + pads = variant_gpio_table(&num); + gpio_configure_pads(pads, num); +} + +static unsigned long mainboard_write_acpi_tables(struct device *device, + unsigned long current, + acpi_rsdp_t *rsdp) +{ + uintptr_t start_addr; + + start_addr = current; + + return start_addr; +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->write_acpi_tables = mainboard_write_acpi_tables; + dev->ops->acpi_inject_dsdt_generator = chromeos_dsdt_generator; +} + +struct chip_operations mainboard_ops = { + .init = mainboard_init, + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/intel/tglrvp/romstage_fsp_params.c b/src/mainboard/intel/tglrvp/romstage_fsp_params.c new file mode 100755 index 0000000..fd1638b --- /dev/null +++ b/src/mainboard/intel/tglrvp/romstage_fsp_params.c @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/byteorder.h> +#include <console/console.h> +#include <fsp/api.h> +#include <soc/romstage.h> +#include <spd_bin.h> +#include "board_id.h" +#include "spd/spd.h" + +void mainboard_memory_init_params(FSPM_UPD *mupd) +{ + FSP_M_CONFIG *mem_cfg = &mupd->FspmConfig; + u8 spd_index = (get_board_id() & 0x1F) & 0x7; + printk(BIOS_DEBUG, "spd index is 0x%x\n", spd_index); + + if (spd_index > 0 && spd_index != 2) { + struct region_device spd_rdev; + + if (get_spd_cbfs_rdev(&spd_rdev, spd_index) < 0) + die("spd.bin not found\n"); + + mem_cfg->MemorySpdDataLen = region_device_sz(&spd_rdev); + + /* Memory leak is ok since we have memory mapped boot media */ + mem_cfg->MemorySpdPtr00 = (uintptr_t)rdev_mmap_full(&spd_rdev); + mem_cfg->MemorySpdPtr10 = mem_cfg->MemorySpdPtr00; + + mem_cfg->SpdAddressTable[0] = 0x0; + mem_cfg->SpdAddressTable[1] = 0x0; + mem_cfg->SpdAddressTable[2] = 0x0; + mem_cfg->SpdAddressTable[3] = 0x0; + } else { + mem_cfg->MemorySpdPtr00 = 0; + mem_cfg->MemorySpdPtr01 = 0; + mem_cfg->MemorySpdPtr10 = 0; + mem_cfg->MemorySpdPtr11 = 0; + + mem_cfg->SpdAddressTable[0] = 0xA0; + mem_cfg->SpdAddressTable[1] = 0xA2; + mem_cfg->SpdAddressTable[2] = 0xA4; + mem_cfg->SpdAddressTable[3] = 0xA6; + } + mem_cfg->DqPinsInterleaved = 0; + mem_cfg->CaVrefConfig = 0x2; /* VREF_CA->CHA/CHB */ + mem_cfg->ECT = 1; /* Early Command Training Enabled */ + mem_cfg->RefClk = 0; /* Auto Select CLK freq */ + + mainboard_fill_dq_map_ch0(&mem_cfg->DqByteMapCh0); + mainboard_fill_dq_map_ch1(&mem_cfg->DqByteMapCh1); + mainboard_fill_dqs_map_ch0(&mem_cfg->DqsMapCpu2DramCh0); + mainboard_fill_dqs_map_ch1(&mem_cfg->DqsMapCpu2DramCh1); + mainboard_fill_rcomp_res_data(&mem_cfg->RcompResistor); + mainboard_fill_rcomp_strength_data(&mem_cfg->RcompTarget); +} diff --git a/src/mainboard/intel/tglrvp/spd/Makefile.inc b/src/mainboard/intel/tglrvp/spd/Makefile.inc new file mode 100755 index 0000000..d92ce96 --- /dev/null +++ b/src/mainboard/intel/tglrvp/spd/Makefile.inc @@ -0,0 +1,27 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2018 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +romstage-y += spd_util.c + +SPD_BIN = $(obj)/spd.bin + +SPD_SOURCES = empty # 0b000 +SPD_SOURCES += samsung_K4F6E304HBMGCJ # 1b001 +SPD_SOURCES += empty # 2b010 +SPD_SOURCES += empty # 3b011 +SPD_SOURCES += samsung_K4F6E304HBMGCJ # 4b100 +SPD_SOURCES += empty # 5b101 +SPD_SOURCES += samsung_K4F6E304HBMGCJ # 6b110 +SPD_SOURCES += empty # 7b111 diff --git a/src/mainboard/intel/tglrvp/spd/empty.spd.hex b/src/mainboard/intel/tglrvp/spd/empty.spd.hex new file mode 100755 index 0000000..67b46cd --- /dev/null +++ b/src/mainboard/intel/tglrvp/spd/empty.spd.hex @@ -0,0 +1,32 @@ +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/intel/tglrvp/spd/samsung_K4F6E304HBMGCJ.spd.hex b/src/mainboard/intel/tglrvp/spd/samsung_K4F6E304HBMGCJ.spd.hex new file mode 100755 index 0000000..62dff16 --- /dev/null +++ b/src/mainboard/intel/tglrvp/spd/samsung_K4F6E304HBMGCJ.spd.hex @@ -0,0 +1,32 @@ +23 11 10 0E 15 19 94 08 00 40 00 00 0A 22 00 00 +00 00 05 0F 92 54 01 00 8A 00 90 A8 90 A0 05 D0 +02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 92 00 A7 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 20 00 00 00 20 20 20 20 20 20 20 +20 20 20 20 20 20 20 20 20 20 20 20 20 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/intel/tglrvp/spd/spd.h b/src/mainboard/intel/tglrvp/spd/spd.h new file mode 100755 index 0000000..9b55563 --- /dev/null +++ b/src/mainboard/intel/tglrvp/spd/spd.h @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef MAINBOARD_SPD_H +#define MAINBOARD_SPD_H + +#define RCOMP_TARGET_PARAMS 0x5 + +void mainboard_fill_dq_map_ch0(void *dq_map_ptr); +void mainboard_fill_dq_map_ch1(void *dq_map_ptr); +void mainboard_fill_dqs_map_ch0(void *dqs_map_ptr); +void mainboard_fill_dqs_map_ch1(void *dqs_map_ptr); +void mainboard_fill_rcomp_res_data(void *rcomp_ptr); +void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr); +#endif diff --git a/src/mainboard/intel/tglrvp/spd/spd_util.c b/src/mainboard/intel/tglrvp/spd/spd_util.c new file mode 100755 index 0000000..8d7eaf6 --- /dev/null +++ b/src/mainboard/intel/tglrvp/spd/spd_util.c @@ -0,0 +1,143 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/byteorder.h> +#include <arch/cpu.h> +#include <intelblocks/mp_init.h> +#include <stdint.h> +#include <string.h> + +#include "../board_id.h" +#include "spd.h" + +enum icl_dimm_type { + icl_u_ddr4 = 0, + icl_u_lpddr4 = 1, + icl_u_lpddr4_type_3 = 4, + icl_y_lpddr4 = 6 +}; + +void mainboard_fill_dq_map_ch0(void *dq_map_ptr) +{ + /* DQ byte map Ch0 */ + const u8 dq_map[12] = { + 0x0F, 0xF0, 0x0F, 0xF0, 0xFF, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + + memcpy(dq_map_ptr, dq_map, sizeof(dq_map)); +} + +void mainboard_fill_dq_map_ch1(void *dq_map_ptr) +{ + const u8 dq_map[12] = { + 0x0F, 0xF0, 0x0F, 0xF0, 0xFF, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + + memcpy(dq_map_ptr, dq_map, sizeof(dq_map)); +} + +static uint8_t get_spd_index(void) +{ + uint8_t spd_index = (get_board_id() & 0x1F) & 0x7; + + return spd_index; +} + +void mainboard_fill_dqs_map_ch0(void *dqs_map_ptr) +{ + /* DQS CPU<>DRAM map Ch0 */ + const u8 dqs_map_u_ddr[8] = { 2, 0, 1, 3, 6, 4, 7, 5 }; + const u8 dqs_map_u_lpddr[8] = { 2, 3, 0, 1, 7, 6, 4, 5 }; + const u8 dqs_map_u_lpddr_type_3[8] = { 2, 3, 1, 0, 7, 6, 4, 5 }; + const u8 dqs_map_y_lpddr[8] = { 0, 1, 2, 3, 4, 5, 6, 7 }; + + switch (get_spd_index()) { + case icl_u_ddr4: + memcpy(dqs_map_ptr, dqs_map_u_ddr, sizeof(dqs_map_u_ddr)); + break; + case icl_u_lpddr4: + memcpy(dqs_map_ptr, dqs_map_u_lpddr, sizeof(dqs_map_u_lpddr)); + break; + case icl_u_lpddr4_type_3: + memcpy(dqs_map_ptr, dqs_map_u_lpddr_type_3, + sizeof(dqs_map_u_lpddr_type_3)); + break; + case icl_y_lpddr4: + memcpy(dqs_map_ptr, dqs_map_y_lpddr, sizeof(dqs_map_y_lpddr)); + break; + default: + break; + } +} + +void mainboard_fill_dqs_map_ch1(void *dqs_map_ptr) +{ + /* DQS CPU<>DRAM map Ch1 */ + const u8 dqs_map_u_ddr[8] = { 1, 3, 2, 0, 5, 7, 6, 4 }; + const u8 dqs_map_u_lpddr[8] = { 1, 0, 3, 2, 5, 4, 7, 6 }; + const u8 dqs_map_y_lpddr[8] = { 0, 1, 2, 3, 5, 4, 7, 6 }; + + switch (get_spd_index()) { + case icl_u_ddr4: + memcpy(dqs_map_ptr, dqs_map_u_ddr, sizeof(dqs_map_u_ddr)); + break; + case icl_u_lpddr4: + case icl_u_lpddr4_type_3: + memcpy(dqs_map_ptr, dqs_map_u_lpddr, sizeof(dqs_map_u_lpddr)); + break; + case icl_y_lpddr4: + memcpy(dqs_map_ptr, dqs_map_y_lpddr, sizeof(dqs_map_y_lpddr)); + break; + default: + break; + } +} + +void mainboard_fill_rcomp_res_data(void *rcomp_ptr) +{ + /* Rcomp resistor */ + const u16 RcompResistor[3] = { 100, 100, 100 }; + memcpy(rcomp_ptr, RcompResistor, sizeof(RcompResistor)); +} + +void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr) +{ + /* Rcomp target */ + static const u16 RcompTarget_DDR4[RCOMP_TARGET_PARAMS] = { + 100, 33, 32, 33, 28 }; + static const u16 RcompTarget_LPDDR4_Ax[RCOMP_TARGET_PARAMS] = { + 80, 40, 40, 40, 30 }; + static const u16 RcompTarget_LPDDR4_Bx[RCOMP_TARGET_PARAMS] = { + 60, 20, 20, 20, 20 }; + + switch (get_spd_index()) { + case icl_u_ddr4: + memcpy(rcomp_strength_ptr, RcompTarget_DDR4, + sizeof(RcompTarget_DDR4)); + break; + case icl_y_lpddr4: + case icl_u_lpddr4: + case icl_u_lpddr4_type_3: + if (cpu_get_cpuid() == CPUID_ICELAKE_A0) + memcpy(rcomp_strength_ptr, RcompTarget_LPDDR4_Ax, + sizeof(RcompTarget_LPDDR4_Ax)); + else + memcpy(rcomp_strength_ptr, RcompTarget_LPDDR4_Bx, + sizeof(RcompTarget_LPDDR4_Bx)); + break; + default: + break; + } +} diff --git a/src/mainboard/intel/tglrvp/variants/baseboard/Makefile.inc b/src/mainboard/intel/tglrvp/variants/baseboard/Makefile.inc new file mode 100755 index 0000000..9fb63f5 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/baseboard/Makefile.inc @@ -0,0 +1,3 @@ +bootblock-y += gpio.c + +ramstage-y += gpio.c diff --git a/src/mainboard/intel/tglrvp/variants/baseboard/gpio.c b/src/mainboard/intel/tglrvp/variants/baseboard/gpio.c new file mode 100755 index 0000000..20029cf --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/baseboard/gpio.c @@ -0,0 +1,126 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +/* Pad configuration in ramstage*/ +static const struct pad_config gpio_table[] = { +/* I2S2_SCLK */ +PAD_CFG_GPI(GPP_A7, NONE, PLTRST), +/* I2S2_RXD */ +PAD_CFG_GPI(GPP_A10, NONE, PLTRST), +/* TCH_PNL2_RST_N */ +PAD_CFG_GPO(GPP_A13, 1, DEEP), +/* ONBOARD_X4_PCIE_SLOT1_PWREN_N */ +PAD_CFG_GPO(GPP_A14, 0, DEEP), +/* TCH_PNL2_INT_N */ +PAD_CFG_GPI_APIC_EDGE_LOW(GPP_B3, NONE, PLTRST), +/* TC_RETIMER_FORCE_PWR */ +PAD_CFG_GPO(GPP_B4, 0, DEEP), +/* FPS_RST_N */ +PAD_CFG_GPO(GPP_B14, 1, DEEP), +/* WIFI_RF_KILL_N */ +PAD_CFG_GPO(GPP_B15, 1, PLTRST), +/* M2_SSD_PWREN_N */ +PAD_CFG_GPO(GPP_B16, 1, DEEP), +/* WWAN_PERST_N */ +PAD_CFG_GPO(GPP_B17, 1, DEEP), +/* BT_RF_KILL_N */ +PAD_CFG_GPO(GPP_B18, 1, PLTRST), +/* CRD_CAM_PWREN_1 */ +PAD_CFG_GPO(GPP_B23, 1, PLTRST), +/* WF_CAM_CLK_EN */ +PAD_CFG_GPO(GPP_C2, 1, PLTRST), +/* ONBOARD_X4_PCIE_SLOT1_RESET_N */ +PAD_CFG_GPO(GPP_C5, 1, DEEP), +/* TCH_PAD_INT_N */ +PAD_CFG_GPI_APIC_EDGE_LOW(GPP_C8, NONE, PLTRST), +/* WWAN_RST_N */ +PAD_CFG_GPO(GPP_C10, 1, DEEP), +/* WWAN_FCP_OFF_N */ +PAD_CFG_GPO(GPP_C11, 1, DEEP), +/* CODEC_INT_N */ +PAD_CFG_GPI_APIC_LOW(GPP_C12, NONE, PLTRST), +/* SPKR_PD_N */ +PAD_CFG_GPO(GPP_C13, 1, PLTRST), +/* WF_CAM_RST_N */ +PAD_CFG_GPO(GPP_C15, 1, PLTRST), +/* CRD_CAM_STROBE_1 */ +PAD_CFG_GPO(GPP_C22, 0, PLTRST), +/* CRD_CAM_PRIVACY_LED_1 */ +PAD_CFG_GPO(GPP_C23, 0, PLTRST), +/* FLASH_DES_SEC_OVERRIDEs */ +PAD_CFG_GPO(GPP_D13, 0, DEEP), +/* TCH_PAD_LS_EN */ +PAD_CFG_GPO(GPP_D14, 1, PLTRST), +/* ONBOARD_X4_PCIE_SLOT1_DGPU_SEL */ +PAD_CFG_GPO(GPP_D15, 0, DEEP), +/* MFR_MODE_DET_STRAP */ +PAD_CFG_GPI(GPP_D16, NONE, PLTRST), +/* TBT_CIO_PWR_EN */ +PAD_CFG_GPO(GPP_E0, 1, DEEP), +/* FPS_INT */ +PAD_CFG_GPI_APIC(GPP_E3, NONE, PLTRST, LEVEL, NONE), +/* EC_SLP_S0_CS_N */ +PAD_CFG_GPO(GPP_E6, 1, DEEP), +/* EC_SMI_N */ +PAD_CFG_GPI_SMI(GPP_E7, NONE, DEEP, LEVEL, NONE), +/* TBT_CIO_PLUG_EVENT_N */ +PAD_CFG_GPI_SCI(GPP_E17, NONE, DEEP, EDGE_SINGLE, NONE), +/* DISP_AUX_P_BIAS_GPIO */ +PAD_CFG_GPO(GPP_E22, 0, PLTRST), +/* DISP_AUX_N_BIAS_GPIO */ +PAD_CFG_GPO(GPP_E23, 1, DEEP), +/* SATA_HDD_PWREN */ +PAD_CFG_GPO(GPP_F4, 1, PLTRST), +/* BIOS_REC */ +PAD_CFG_GPI(GPP_F5, NONE, PLTRST), +/* SD_CD# */ +PAD_CFG_NF(GPP_G5, UP_20K, PWROK, NF1), +/* SD_WP */ +PAD_CFG_NF(GPP_G7, DN_20K, PWROK, NF1), +/* M2_SSD_RST_N */ +PAD_CFG_GPO(GPP_H0, 1, DEEP), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + +}; + +const struct pad_config *__attribute__((weak)) variant_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +const struct pad_config *__attribute__((weak)) + variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + +static const struct cros_gpio cros_gpios[] = { + CROS_GPIO_REC_AL(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME), +}; + +const struct cros_gpio *__attribute__((weak)) variant_cros_gpios(size_t *num) +{ + *num = ARRAY_SIZE(cros_gpios); + return cros_gpios; +} diff --git a/src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/ec.h b/src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/ec.h new file mode 100755 index 0000000..03096ac --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/ec.h @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __BASEBOARD_EC_H__ +#define __BASEBOARD_EC_H__ + +#include <ec/ec.h> +#include <ec/google/chromeec/ec_commands.h> + +#include <variant/gpio.h> + + +#define MAINBOARD_EC_SCI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_STATUS) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_START) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_STOP) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MKBP)) + +#define MAINBOARD_EC_SMI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED)) + +/* EC can wake from S5 with lid or power button */ +#define MAINBOARD_EC_S5_WAKE_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) + +/* + * EC can wake from S3 with lid or power button or key press or + * mode change event. + */ +#define MAINBOARD_EC_S3_WAKE_EVENTS \ + (MAINBOARD_EC_S5_WAKE_EVENTS |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE)) + +/* Log EC wake events plus EC shutdown events */ +#define MAINBOARD_EC_LOG_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PANIC)) + +/* + * ACPI related definitions for ASL code. + */ + +/* Enable EC backed ALS device in ACPI */ +#define EC_ENABLE_ALS_DEVICE + +/* Enable EC backed PD MCU device in ACPI */ +#define EC_ENABLE_PD_MCU_DEVICE + +/* Enable LID switch and provide wake pin for EC */ +#define EC_ENABLE_LID_SWITCH +#define EC_ENABLE_WAKE_PIN GPE_EC_WAKE + +#define SIO_EC_MEMMAP_ENABLE /* EC Memory Map Resources */ +#define SIO_EC_HOST_ENABLE /* EC Host Interface Resources */ +#define SIO_EC_ENABLE_PS2K /* Enable PS/2 Keyboard */ + +#endif /* __BASEBOARD_EC_H__ */ diff --git a/src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/gpio.h b/src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/gpio.h new file mode 100755 index 0000000..ca303f9 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/gpio.h @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef __BASEBOARD_GPIO_H__ +#define __BASEBOARD_GPIO_H__ + +#include <soc/gpe.h> +#include <soc/gpio.h> + +/* eSPI virtual wire reporting */ +#define EC_SCI_GPI GPE0_ESPI + +/* EC wake is LAN_WAKE# which is a special DeepSX wake pin */ +#define GPE_EC_WAKE GPE0_LAN_WAK + +#endif /* __BASEBOARD_GPIO_H__ */ diff --git a/src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/variants.h b/src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/variants.h new file mode 100755 index 0000000..12d16bc --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/baseboard/include/baseboard/variants.h @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __BASEBOARD_VARIANTS_H__ +#define __BASEBOARD_VARIANTS_H__ + +#include <soc/gpio.h> +#include <stdint.h> +#include <vendorcode/google/chromeos/chromeos.h> + +/* The next set of functions return the gpio table and fill in the number of + * entries for each table. */ + +const struct pad_config *variant_gpio_table(size_t *num); +const struct pad_config *variant_early_gpio_table(size_t *num); + +const struct cros_gpio *variant_cros_gpios(size_t *num); + +#endif /*__BASEBOARD_VARIANTS_H__ */ diff --git a/src/mainboard/intel/tglrvp/variants/icl_u/Makefile.inc b/src/mainboard/intel/tglrvp/variants/icl_u/Makefile.inc new file mode 100755 index 0000000..0c1af69 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_u/Makefile.inc @@ -0,0 +1,18 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2018 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +bootblock-y += gpio.c + +ramstage-y += gpio.c diff --git a/src/mainboard/intel/tglrvp/variants/icl_u/devicetree.cb b/src/mainboard/intel/tglrvp/variants/icl_u/devicetree.cb new file mode 100755 index 0000000..6d7fad7 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_u/devicetree.cb @@ -0,0 +1,350 @@ +chip soc/intel/icelake + + device cpu_cluster 0 on + device lapic 0 on end + end + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # FSP configuration + register "SaGv" = "SaGv_Enabled" + register "SmbusEnable" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "SdCardPowerEnableActiveHigh" = "1" + + register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port1 + register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # USB2 WWAN + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # USB2 Bluetooth + register "usb2_ports[3]" = "USB2_PORT_MID(OC0)" # Type-C Port1 + register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-C Port2 + register "usb2_ports[5]" = "USB2_PORT_MID(OC3)" # Type-C Port3 + register "usb2_ports[6]" = "USB2_PORT_MID(OC3)" # Type-C Port4 + register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port2 + register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # USB2 Type A port1 + register "usb2_ports[9]" = "USB2_PORT_MID(OC3)" # USB2 Type A port2 + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 WLAN + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED + + # Enable Pch iSCLK + register "pch_isclk" = "1" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + # EC memory map range is 0x900-0x9ff + register "gen3_dec" = "0x00fc0901" + + register "PchHdaDspEnable" = "1" + register "PchHdaAudioLinkHda" = "1" + + register "PrmrrSize" = "0x10000000" + + register "PcieRpEnable[0]" = "1" + register "PcieRpEnable[1]" = "1" + register "PcieRpEnable[2]" = "1" + register "PcieRpEnable[3]" = "1" + register "PcieRpEnable[4]" = "1" + register "PcieRpEnable[5]" = "1" + register "PcieRpEnable[6]" = "1" + register "PcieRpEnable[7]" = "1" + register "PcieRpEnable[8]" = "1" + register "PcieRpEnable[9]" = "1" + register "PcieRpEnable[10]" = "1" + register "PcieRpEnable[11]" = "1" + register "PcieRpEnable[12]" = "1" + register "PcieRpEnable[13]" = "1" + register "PcieRpEnable[14]" = "1" + register "PcieRpEnable[15]" = "1" + + register "PcieClkSrcUsage[0]" = "2" + register "PcieClkSrcUsage[1]" = "8" + register "PcieClkSrcUsage[2]" = "0xC" + register "PcieClkSrcUsage[3]" = "0x70" + register "PcieClkSrcUsage[4]" = "4" + register "PcieClkSrcUsage[5]" = "0xE" + register "PcieClkSrcUsage[6]" = "0x80" + register "PcieClkSrcUsage[7]" = "0x80" + register "PcieClkSrcUsage[8]" = "0x80" + register "PcieClkSrcUsage[9]" = "0x80" + register "PcieClkSrcUsage[10]" = "0x80" + register "PcieClkSrcUsage[11]" = "0x80" + register "PcieClkSrcUsage[12]" = "0x80" + register "PcieClkSrcUsage[13]" = "0x80" + register "PcieClkSrcUsage[14]" = "0x80" + register "PcieClkSrcUsage[15]" = "0x80" + + register "PcieClkSrcClkReq[0]" = "0" + register "PcieClkSrcClkReq[1]" = "1" + register "PcieClkSrcClkReq[2]" = "2" + register "PcieClkSrcClkReq[3]" = "3" + register "PcieClkSrcClkReq[4]" = "4" + register "PcieClkSrcClkReq[5]" = "5" + register "PcieClkSrcClkReq[6]" = "6" + register "PcieClkSrcClkReq[7]" = "7" + register "PcieClkSrcClkReq[8]" = "8" + register "PcieClkSrcClkReq[9]" = "9" + register "PcieClkSrcClkReq[10]" = "10" + register "PcieClkSrcClkReq[11]" = "11" + register "PcieClkSrcClkReq[12]" = "12" + register "PcieClkSrcClkReq[13]" = "13" + register "PcieClkSrcClkReq[14]" = "14" + register "PcieClkSrcClkReq[15]" = "15" + + register "SataEnable" = "1" + register "SataSalpSupport" = "1" + register "SataPortsEnable[0]" = "1" + register "SataPortsEnable[1]" = "1" + register "SataPortsEnable[2]" = "1" + register "SataPortsEnable[3]" = "1" + register "SataPortsEnable[4]" = "1" + register "SataPortsEnable[5]" = "1" + register "SataPortsEnable[6]" = "1" + register "SataPortsEnable[7]" = "1" + + register "SataPortsDevSlp[0]" = "1" + register "SataPortsDevSlp[1]" = "1" + register "SataPortsDevSlp[2]" = "1" + register "SataPortsDevSlp[3]" = "1" + register "SataPortsDevSlp[4]" = "1" + register "SataPortsDevSlp[5]" = "1" + register "SataPortsDevSlp[6]" = "1" + register "SataPortsDevSlp[7]" = "1" + + register "SerialIoI2cMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + + register "SerialIoGSpiMode" = "{ + [PchSerialIoIndexGSPI0] = PchSerialIoDisabled, + [PchSerialIoIndexGSPI1] = PchSerialIoPci, + [PchSerialIoIndexGSPI2] = PchSerialIoDisabled, + }" + + register "SerialIoGSpiCsMode" = "{ + [PchSerialIoIndexGSPI0] = 1, + [PchSerialIoIndexGSPI1] = 1, + [PchSerialIoIndexGSPI2] = 1, + }" + + register "SerialIoGSpiCsState" = "{ + [PchSerialIoIndexGSPI0] = 0, + [PchSerialIoIndexGSPI1] = 0, + [PchSerialIoIndexGSPI2] = 0, + }" + + register "SerialIoUartMode" = "{ + [PchSerialIoIndexUART0] = PchSerialIoDisabled, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoSkipInit, + }" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable DPTF + register "dptf_enable" = "1" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "GPP_G5" + + # Enable S0ix + register "s0ix_enable" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| GSPI1 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #+-------------------+---------------------------+ + + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .gspi[1] = { + .speed_mhz = 1, + .early_init = 1, + }, + }" + + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 04.0 off end # SA Thermal device + device pci 12.0 off end # Thermal Subsystem + device pci 12.5 off end # UFS SCS + device pci 12.6 off end # GSPI #2 + device pci 14.0 on + chip drivers/usb/acpi + register "desc" = ""Root Hub"" + register "type" = "UPC_TYPE_HUB" + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB3/2 Type-A Left Lower"" + register "type" = "UPC_TYPE_A" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB C Connector 1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB C Connector 2"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB C Connector 3"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.5 on end + end + chip drivers/usb/acpi + register "desc" = ""USB C Connector 4"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.6 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3/2 Type-A Left Upper"" + register "type" = "UPC_TYPE_A" + device usb 2.7 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Right Lower"" + register "type" = "UPC_TYPE_A" + device usb 2.8 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Right Upper"" + register "type" = "UPC_TYPE_A" + device usb 2.9 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3/2 Type-A Left Lower"" + register "type" = "UPC_TYPE_A" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3/2 Type-A Left Upper"" + register "type" = "UPC_TYPE_A" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""WLAN"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Port Unused1"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Port Unused2"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Port Unused3"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 off end # PMC SRAM + chip drivers/intel/wifi + register "wake" = "GPE0_PME_B0" + device pci 14.3 on end # CNVi wifi + end + device pci 14.5 on end # SDCard + device pci 15.0 on + chip drivers/i2c/hid + register "generic.hid" = ""ALPS0000"" + register "generic.desc" = ""Touchpad"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C8_IRQ)" + register "hid_desc_reg_offset" = "0x20" + device i2c 2c on end + end + end # I2C 0 + device pci 15.1 on end # I2C #1 + device pci 15.2 on end # I2C #2 + device pci 15.3 on end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 16.5 off end # Management Engine Interface 4 + device pci 17.0 on end # SATA + device pci 19.0 on end # I2C #4 + device pci 19.1 off end # I2C #5 + device pci 19.2 on end # UART #2 + device pci 1a.0 on end # eMMC + device pci 1c.0 on + chip drivers/intel/wifi + register "wake" = "GPE0_PCI_EXP" + device pci 00.0 on end + end + end # PCI Express Port 1 x4 SLOT1 + device pci 1c.4 on end # PCI Express Port 5 x1 SLOT2/LAN + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1d.4 off end # PCI Express Port 13 + device pci 1d.5 off end # PCI Express Port 14 + device pci 1d.6 off end # PCI Express Port 15 + device pci 1d.7 off end # PCI Express Port 16 + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 on + chip drivers/spi/acpi + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "compat_string" = ""google,cr50"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" + device spi 0 on end + end + end # GSPI #1 + device pci 1f.0 on end # eSPI Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/intel/tglrvp/variants/icl_u/gpio.c b/src/mainboard/intel/tglrvp/variants/icl_u/gpio.c new file mode 100755 index 0000000..ea96cbc --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_u/gpio.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +/* Pad configuration in ramstage*/ +static const struct pad_config gpio_table[] = { +/* I2S2_SCLK */ +PAD_CFG_GPI(GPP_A7, NONE, PLTRST), +/* I2S2_RXD */ +PAD_CFG_GPI(GPP_A10, NONE, PLTRST), +/* TCH_PNL2_RST_N */ +PAD_CFG_GPO(GPP_A13, 1, DEEP), +/* ONBOARD_X4_PCIE_SLOT1_PWREN_N */ +PAD_CFG_GPO(GPP_A14, 0, DEEP), +/* TCH_PNL2_INT_N */ +PAD_CFG_GPI_APIC_EDGE_LOW(GPP_B3, NONE, PLTRST), +/* TC_RETIMER_FORCE_PWR */ +PAD_CFG_GPO(GPP_B4, 0, DEEP), +/* FPS_RST_N */ +PAD_CFG_GPO(GPP_B14, 1, DEEP), +/* WIFI_RF_KILL_N */ +PAD_CFG_GPO(GPP_B15, 1, PLTRST), +/* M2_SSD_PWREN_N */ +PAD_CFG_GPO(GPP_B16, 1, DEEP), +/* WWAN_PERST_N */ +PAD_CFG_GPO(GPP_B17, 1, DEEP), +/* BT_RF_KILL_N */ +PAD_CFG_GPO(GPP_B18, 1, PLTRST), +/* CRD_CAM_PWREN_1 */ +PAD_CFG_GPO(GPP_B23, 1, PLTRST), +/* WF_CAM_CLK_EN */ +PAD_CFG_GPO(GPP_C2, 1, PLTRST), +/* ONBOARD_X4_PCIE_SLOT1_RESET_N */ +PAD_CFG_GPO(GPP_C5, 1, DEEP), +/* TCH_PAD_INT_N */ +PAD_CFG_GPI_APIC_EDGE_LOW(GPP_C8, NONE, PLTRST), +/* WWAN_RST_N */ +PAD_CFG_GPO(GPP_C10, 1, DEEP), +/* WWAN_FCP_OFF_N */ +PAD_CFG_GPO(GPP_C11, 1, DEEP), +/* CODEC_INT_N */ +PAD_CFG_GPI_APIC_LOW(GPP_C12, NONE, PLTRST), +/* SPKR_PD_N */ +PAD_CFG_GPO(GPP_C13, 1, PLTRST), +/* WF_CAM_RST_N */ +PAD_CFG_GPO(GPP_C15, 1, PLTRST), +/* CRD_CAM_STROBE_1 */ +PAD_CFG_GPO(GPP_C22, 0, PLTRST), +/* CRD_CAM_PRIVACY_LED_1 */ +PAD_CFG_GPO(GPP_C23, 0, PLTRST), +/* FLASH_DES_SEC_OVERRIDEs */ +PAD_CFG_GPO(GPP_D13, 0, DEEP), +/* TCH_PAD_LS_EN */ +PAD_CFG_GPO(GPP_D14, 1, PLTRST), +/* ONBOARD_X4_PCIE_SLOT1_DGPU_SEL */ +PAD_CFG_GPO(GPP_D15, 0, DEEP), +/* MFR_MODE_DET_STRAP */ +PAD_CFG_GPI(GPP_D16, NONE, PLTRST), +/* TBT_CIO_PWR_EN */ +PAD_CFG_GPO(GPP_E0, 1, DEEP), +/* FPS_INT */ +PAD_CFG_GPI_APIC(GPP_E3, NONE, PLTRST, LEVEL, NONE), +/* EC_SLP_S0_CS_N */ +PAD_CFG_GPO(GPP_E6, 1, DEEP), +/* EC_SMI_N */ +PAD_CFG_GPI_SMI(GPP_E7, NONE, DEEP, LEVEL, NONE), +/* TBT_CIO_PLUG_EVENT_N */ +PAD_CFG_GPI_SCI(GPP_E17, NONE, DEEP, EDGE_SINGLE, NONE), +/* DISP_AUX_P_BIAS_GPIO */ +PAD_CFG_GPO(GPP_E22, 0, PLTRST), +/* DISP_AUX_N_BIAS_GPIO */ +PAD_CFG_GPO(GPP_E23, 1, DEEP), +/* SATA_HDD_PWREN */ +PAD_CFG_GPO(GPP_F4, 1, PLTRST), +/* BIOS_REC */ +PAD_CFG_GPI(GPP_F5, NONE, PLTRST), +/* SD_CD# */ +PAD_CFG_NF(GPP_G5, UP_20K, PWROK, NF1), +/* SD_WP */ +PAD_CFG_NF(GPP_G7, DN_20K, PWROK, NF1), +/* M2_SSD_RST_N */ +PAD_CFG_GPO(GPP_H0, 1, DEEP), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + + +}; + +const struct pad_config *variant_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/intel/tglrvp/variants/icl_u/include/variant/ec.h b/src/mainboard/intel/tglrvp/variants/icl_u/include/variant/ec.h new file mode 100755 index 0000000..af41bf4 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_u/include/variant/ec.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MAINBOARD_EC_H__ +#define __MAINBOARD_EC_H__ + +#include <baseboard/ec.h> + +#endif /* __MAINBOARD_EC_H__ */ diff --git a/src/mainboard/intel/tglrvp/variants/icl_u/include/variant/gpio.h b/src/mainboard/intel/tglrvp/variants/icl_u/include/variant/gpio.h new file mode 100755 index 0000000..c34a9b3 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_u/include/variant/gpio.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef __MAINBOARD_GPIO_H__ +#define __MAINBOARD_GPIO_H__ + +#include <baseboard/gpio.h> + +#endif /* __MAINBOARD_GPIO_H__ */ diff --git a/src/mainboard/intel/tglrvp/variants/icl_u/include/variant/hda_verb.h b/src/mainboard/intel/tglrvp/variants/icl_u/include/variant/hda_verb.h new file mode 100755 index 0000000..d821a26 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_u/include/variant/hda_verb.h @@ -0,0 +1,700 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef HDA_VERB_H +#define HDA_VERB_H + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* ALC 700 */ + 0x10EC0700, + 0xFFFFFFFF, + 0x00000023, + + AZALIA_SUBVENDOR(0, 0x10EC10F2), + AZALIA_PIN_CFG(0, 0x01, 0x00000000), + AZALIA_PIN_CFG(0, 0x12, 0x40000000), + AZALIA_PIN_CFG(0, 0x13, 0x40000000), + AZALIA_PIN_CFG(0, 0x14, 0x411111F0), + AZALIA_PIN_CFG(0, 0x15, 0x411111F0), + AZALIA_PIN_CFG(0, 0x16, 0x411111F0), + AZALIA_PIN_CFG(0, 0x17, 0x90170110), + AZALIA_PIN_CFG(0, 0x18, 0x411111F0), + AZALIA_PIN_CFG(0, 0x19, 0x04A11030), + AZALIA_PIN_CFG(0, 0x1A, 0x411111F0), + AZALIA_PIN_CFG(0, 0x1B, 0x411111F0), + AZALIA_PIN_CFG(0, 0x1D, 0x40622005), + AZALIA_PIN_CFG(0, 0x1E, 0x411111F0), + AZALIA_PIN_CFG(0, 0x1F, 0x411111F0), + AZALIA_PIN_CFG(0, 0x21, 0x04211020), + AZALIA_PIN_CFG(0, 0x29, 0x411111F0), + + /* Widget node 0x20 */ + 0x02050045, + 0x02045289, + 0x0205004A, + 0x0204201B, + /* Widget node 0x20 - 1 */ + 0x05850000, + 0x05843888, + 0x0205006F, + 0x02042C0B, + + //Widget node 0X20 for ALC1305 20160603 update + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040000, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040004, + 0x02050028, + 0x02040600, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204003C, + 0x02050028, + 0x0204FFD0, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040080, + 0x02050028, + 0x02040080, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040080, + 0x02050028, + 0x02040880, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204003A, + 0x02050028, + 0x02040DFE, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006A, + 0x02050028, + 0x0204005D, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006C, + 0x02050028, + 0x02040442, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040005, + 0x02050028, + 0x02040880, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040006, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040008, + 0x02050028, + 0x0204B000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204002E, + 0x02050028, + 0x02040800, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006A, + 0x02050028, + 0x020400C3, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006C, + 0x02050028, + 0x0204D4A0, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006A, + 0x02050028, + 0x020400CC, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006C, + 0x02050028, + 0x0204400A, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006A, + 0x02050028, + 0x020400C1, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006C, + 0x02050028, + 0x02040320, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040039, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204003B, + 0x02050028, + 0x0204FFFF, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204003C, + 0x02050028, + 0x0204FC20, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204003A, + 0x02050028, + 0x02041DFE, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C0, + 0x02050028, + 0x020401FA, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C1, + 0x02050028, + 0x0204DE23, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C2, + 0x02050028, + 0x02041C00, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C3, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C4, + 0x02050028, + 0x02040200, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C5, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C6, + 0x02050028, + 0x020403F5, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C7, + 0x02050028, + 0x0204AF1B, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C8, + 0x02050028, + 0x02041E0A, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C9, + 0x02050028, + 0x0204368E, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CA, + 0x02050028, + 0x020401FA, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CB, + 0x02050028, + 0x0204DE23, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CC, + 0x02050028, + 0x02041C00, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CD, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CE, + 0x02050028, + 0x02040200, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CF, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400D0, + 0x02050028, + 0x020403F5, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400D1, + 0x02050028, + 0x0204AF1B, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400D2, + 0x02050028, + 0x02041E0A, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400D3, + 0x02050028, + 0x0204368E, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040040, + 0x02050028, + 0x0204800F, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040062, + 0x02050028, + 0x02048000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040063, + 0x02050028, + 0x02044848, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040064, + 0x02050028, + 0x02040800, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040065, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040066, + 0x02050028, + 0x02044004, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040067, + 0x02050028, + 0x02040802, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040068, + 0x02050028, + 0x0204890F, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040069, + 0x02050028, + 0x0204E021, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040070, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040071, + 0x02050000, + 0x02043330, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040072, + 0x02050000, + 0x02043333, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040073, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040074, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040075, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040076, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040050, + 0x02050028, + 0x020402EC, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040051, + 0x02050028, + 0x02044909, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040052, + 0x02050028, + 0x020440B0, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040046, + 0x02050028, + 0x0204C22E, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040047, + 0x02050028, + 0x02040C00, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040048, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040049, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204004A, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204004B, + 0x02050028, + 0x02041C00, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006A, + 0x02050028, + 0x02040090, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006C, + 0x02050028, + 0x0204721F, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204009E, + 0x02050028, + 0x02040001, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040004, + 0x02050028, + 0x02040500, + 0x02050029, + 0x0204B024 +}; + +const u32 pc_beep_verbs[] = { +}; +AZALIA_ARRAY_SIZES; +#endif diff --git a/src/mainboard/intel/tglrvp/variants/icl_y/Makefile.inc b/src/mainboard/intel/tglrvp/variants/icl_y/Makefile.inc new file mode 100755 index 0000000..0c1af69 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_y/Makefile.inc @@ -0,0 +1,18 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2018 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +bootblock-y += gpio.c + +ramstage-y += gpio.c diff --git a/src/mainboard/intel/tglrvp/variants/icl_y/devicetree.cb b/src/mainboard/intel/tglrvp/variants/icl_y/devicetree.cb new file mode 100755 index 0000000..4f41308 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_y/devicetree.cb @@ -0,0 +1,350 @@ +chip soc/intel/icelake + + device cpu_cluster 0 on + device lapic 0 on end + end + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # FSP configuration + register "SaGv" = "SaGv_Enabled" + register "SmbusEnable" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "SdCardPowerEnableActiveHigh" = "1" + + register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port1 + register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # USB3/2 Type A port2 + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[3]" = "USB2_PORT_MID(OC0)" # Type-C Port1 + register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-C Port2 + register "usb2_ports[5]" = "USB2_PORT_MID(OC3)" # Type-C Port3 + register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # UNUSED + register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # UNUSED + register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # USB2 Type A port1 + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # USB2 Type A port2 + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 WLAN + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # UNUSED + + # Enable Pch iSCLK + register "pch_isclk" = "1" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + # EC memory map range is 0x900-0x9ff + register "gen3_dec" = "0x00fc0901" + + register "PchHdaDspEnable" = "1" + register "PchHdaAudioLinkHda" = "1" + + register "PrmrrSize" = "0x10000000" + + register "PcieRpEnable[0]" = "1" + register "PcieRpEnable[1]" = "1" + register "PcieRpEnable[2]" = "1" + register "PcieRpEnable[3]" = "1" + register "PcieRpEnable[4]" = "1" + register "PcieRpEnable[5]" = "1" + register "PcieRpEnable[6]" = "1" + register "PcieRpEnable[7]" = "1" + register "PcieRpEnable[8]" = "1" + register "PcieRpEnable[9]" = "1" + register "PcieRpEnable[10]" = "1" + register "PcieRpEnable[11]" = "1" + register "PcieRpEnable[12]" = "1" + register "PcieRpEnable[13]" = "1" + register "PcieRpEnable[14]" = "1" + register "PcieRpEnable[15]" = "1" + + register "PcieClkSrcUsage[0]" = "0x80" + register "PcieClkSrcUsage[1]" = "8" + register "PcieClkSrcUsage[2]" = "0xC" + register "PcieClkSrcUsage[3]" = "0x70" + register "PcieClkSrcUsage[4]" = "4" + register "PcieClkSrcUsage[5]" = "2" + register "PcieClkSrcUsage[6]" = "0x80" + register "PcieClkSrcUsage[7]" = "0x80" + register "PcieClkSrcUsage[8]" = "0x80" + register "PcieClkSrcUsage[9]" = "0x80" + register "PcieClkSrcUsage[10]" = "0x80" + register "PcieClkSrcUsage[11]" = "0x80" + register "PcieClkSrcUsage[12]" = "0x80" + register "PcieClkSrcUsage[13]" = "0x80" + register "PcieClkSrcUsage[14]" = "0x80" + register "PcieClkSrcUsage[15]" = "0x80" + + register "PcieClkSrcClkReq[0]" = "0" + register "PcieClkSrcClkReq[1]" = "1" + register "PcieClkSrcClkReq[2]" = "2" + register "PcieClkSrcClkReq[3]" = "3" + register "PcieClkSrcClkReq[4]" = "4" + register "PcieClkSrcClkReq[5]" = "5" + register "PcieClkSrcClkReq[6]" = "6" + register "PcieClkSrcClkReq[7]" = "7" + register "PcieClkSrcClkReq[8]" = "8" + register "PcieClkSrcClkReq[9]" = "9" + register "PcieClkSrcClkReq[10]" = "10" + register "PcieClkSrcClkReq[11]" = "11" + register "PcieClkSrcClkReq[12]" = "12" + register "PcieClkSrcClkReq[13]" = "13" + register "PcieClkSrcClkReq[14]" = "14" + register "PcieClkSrcClkReq[15]" = "15" + + register "SataEnable" = "1" + register "SataSalpSupport" = "1" + register "SataPortsEnable[0]" = "1" + register "SataPortsEnable[1]" = "1" + register "SataPortsEnable[2]" = "1" + register "SataPortsEnable[3]" = "1" + register "SataPortsEnable[4]" = "1" + register "SataPortsEnable[5]" = "1" + register "SataPortsEnable[6]" = "1" + register "SataPortsEnable[7]" = "1" + + register "SataPortsDevSlp[0]" = "1" + register "SataPortsDevSlp[1]" = "1" + register "SataPortsDevSlp[2]" = "1" + register "SataPortsDevSlp[3]" = "1" + register "SataPortsDevSlp[4]" = "1" + register "SataPortsDevSlp[5]" = "1" + register "SataPortsDevSlp[6]" = "1" + register "SataPortsDevSlp[7]" = "1" + + register "SerialIoI2cMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + + register "SerialIoGSpiMode" = "{ + [PchSerialIoIndexGSPI0] = PchSerialIoDisabled, + [PchSerialIoIndexGSPI1] = PchSerialIoPci, + [PchSerialIoIndexGSPI2] = PchSerialIoDisabled, + }" + + register "SerialIoGSpiCsMode" = "{ + [PchSerialIoIndexGSPI0] = 1, + [PchSerialIoIndexGSPI1] = 1, + [PchSerialIoIndexGSPI2] = 1, + }" + + register "SerialIoGSpiCsState" = "{ + [PchSerialIoIndexGSPI0] = 0, + [PchSerialIoIndexGSPI1] = 0, + [PchSerialIoIndexGSPI2] = 0, + }" + + register "SerialIoUartMode" = "{ + [PchSerialIoIndexUART0] = PchSerialIoDisabled, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoSkipInit, + }" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable DPTF + register "dptf_enable" = "1" + + # GPIO for SD card detect + register "sdcard_cd_gpio" = "GPP_G5" + + # Enable S0ix + register "s0ix_enable" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| GSPI1 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #+-------------------+---------------------------+ + + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .gspi[1] = { + .speed_mhz = 1, + .early_init = 1, + }, + }" + + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 04.0 off end # SA Thermal device + device pci 12.0 off end # Thermal Subsystem + device pci 12.5 off end # UFS SCS + device pci 12.6 off end # GSPI #2 + device pci 14.0 on + chip drivers/usb/acpi + register "desc" = ""Root Hub"" + register "type" = "UPC_TYPE_HUB" + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB3-2 Type-A Left Lower"" + register "type" = "UPC_TYPE_A" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3-2 Type-A Left Upper"" + register "type" = "UPC_TYPE_A" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB C Connector 1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB C Connector 2"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB C Connector 3"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.5 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Port Unused 1"" + register "type" = "UPC_TYPE_UNUSED" + device usb 2.6 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Port Unused 2"" + register "type" = "UPC_TYPE_UNUSED" + device usb 2.7 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Right Lower"" + register "type" = "UPC_TYPE_A" + device usb 2.8 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Right Upper"" + register "type" = "UPC_TYPE_A" + device usb 2.9 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3/2 Type-A Left Lower"" + register "type" = "UPC_TYPE_A" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3/2 Type-A Left Upper"" + register "type" = "UPC_TYPE_A" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""WLAN"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Port Unused1"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Port Unused2"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Port Unused3"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 off end # PMC SRAM + chip drivers/intel/wifi + register "wake" = "GPE0_PME_B0" + device pci 14.3 on end # CNVi wifi + end + device pci 14.5 on end # SDCard + device pci 15.0 on + chip drivers/i2c/hid + register "generic.hid" = ""ALPS0000"" + register "generic.desc" = ""Touchpad"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C8_IRQ)" + register "hid_desc_reg_offset" = "0x20" + device i2c 2c on end + end + end # I2C 0 + device pci 15.1 on end # I2C #1 + device pci 15.2 on end # I2C #2 + device pci 15.3 on end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 16.5 off end # Management Engine Interface 4 + device pci 17.0 on end # SATA + device pci 19.0 on end # I2C #4 + device pci 19.1 off end # I2C #5 + device pci 19.2 on end # UART #2 + device pci 1a.0 on end # eMMC + device pci 1c.0 on + chip drivers/intel/wifi + register "wake" = "GPE0_PCI_EXP" + device pci 00.0 on end + end + end # PCI Express Port 1 x4 SLOT1 + device pci 1c.4 on end # PCI Express Port 5 x1 SLOT2/LAN + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1d.4 off end # PCI Express Port 13 + device pci 1d.5 off end # PCI Express Port 14 + device pci 1d.6 off end # PCI Express Port 15 + device pci 1d.7 off end # PCI Express Port 16 + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 on + chip drivers/spi/acpi + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "compat_string" = ""google,cr50"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" + device spi 0 on end + end + end # GSPI #1 + device pci 1f.0 on end # eSPI Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/intel/tglrvp/variants/icl_y/gpio.c b/src/mainboard/intel/tglrvp/variants/icl_y/gpio.c new file mode 100755 index 0000000..ea96cbc --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_y/gpio.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +/* Pad configuration in ramstage*/ +static const struct pad_config gpio_table[] = { +/* I2S2_SCLK */ +PAD_CFG_GPI(GPP_A7, NONE, PLTRST), +/* I2S2_RXD */ +PAD_CFG_GPI(GPP_A10, NONE, PLTRST), +/* TCH_PNL2_RST_N */ +PAD_CFG_GPO(GPP_A13, 1, DEEP), +/* ONBOARD_X4_PCIE_SLOT1_PWREN_N */ +PAD_CFG_GPO(GPP_A14, 0, DEEP), +/* TCH_PNL2_INT_N */ +PAD_CFG_GPI_APIC_EDGE_LOW(GPP_B3, NONE, PLTRST), +/* TC_RETIMER_FORCE_PWR */ +PAD_CFG_GPO(GPP_B4, 0, DEEP), +/* FPS_RST_N */ +PAD_CFG_GPO(GPP_B14, 1, DEEP), +/* WIFI_RF_KILL_N */ +PAD_CFG_GPO(GPP_B15, 1, PLTRST), +/* M2_SSD_PWREN_N */ +PAD_CFG_GPO(GPP_B16, 1, DEEP), +/* WWAN_PERST_N */ +PAD_CFG_GPO(GPP_B17, 1, DEEP), +/* BT_RF_KILL_N */ +PAD_CFG_GPO(GPP_B18, 1, PLTRST), +/* CRD_CAM_PWREN_1 */ +PAD_CFG_GPO(GPP_B23, 1, PLTRST), +/* WF_CAM_CLK_EN */ +PAD_CFG_GPO(GPP_C2, 1, PLTRST), +/* ONBOARD_X4_PCIE_SLOT1_RESET_N */ +PAD_CFG_GPO(GPP_C5, 1, DEEP), +/* TCH_PAD_INT_N */ +PAD_CFG_GPI_APIC_EDGE_LOW(GPP_C8, NONE, PLTRST), +/* WWAN_RST_N */ +PAD_CFG_GPO(GPP_C10, 1, DEEP), +/* WWAN_FCP_OFF_N */ +PAD_CFG_GPO(GPP_C11, 1, DEEP), +/* CODEC_INT_N */ +PAD_CFG_GPI_APIC_LOW(GPP_C12, NONE, PLTRST), +/* SPKR_PD_N */ +PAD_CFG_GPO(GPP_C13, 1, PLTRST), +/* WF_CAM_RST_N */ +PAD_CFG_GPO(GPP_C15, 1, PLTRST), +/* CRD_CAM_STROBE_1 */ +PAD_CFG_GPO(GPP_C22, 0, PLTRST), +/* CRD_CAM_PRIVACY_LED_1 */ +PAD_CFG_GPO(GPP_C23, 0, PLTRST), +/* FLASH_DES_SEC_OVERRIDEs */ +PAD_CFG_GPO(GPP_D13, 0, DEEP), +/* TCH_PAD_LS_EN */ +PAD_CFG_GPO(GPP_D14, 1, PLTRST), +/* ONBOARD_X4_PCIE_SLOT1_DGPU_SEL */ +PAD_CFG_GPO(GPP_D15, 0, DEEP), +/* MFR_MODE_DET_STRAP */ +PAD_CFG_GPI(GPP_D16, NONE, PLTRST), +/* TBT_CIO_PWR_EN */ +PAD_CFG_GPO(GPP_E0, 1, DEEP), +/* FPS_INT */ +PAD_CFG_GPI_APIC(GPP_E3, NONE, PLTRST, LEVEL, NONE), +/* EC_SLP_S0_CS_N */ +PAD_CFG_GPO(GPP_E6, 1, DEEP), +/* EC_SMI_N */ +PAD_CFG_GPI_SMI(GPP_E7, NONE, DEEP, LEVEL, NONE), +/* TBT_CIO_PLUG_EVENT_N */ +PAD_CFG_GPI_SCI(GPP_E17, NONE, DEEP, EDGE_SINGLE, NONE), +/* DISP_AUX_P_BIAS_GPIO */ +PAD_CFG_GPO(GPP_E22, 0, PLTRST), +/* DISP_AUX_N_BIAS_GPIO */ +PAD_CFG_GPO(GPP_E23, 1, DEEP), +/* SATA_HDD_PWREN */ +PAD_CFG_GPO(GPP_F4, 1, PLTRST), +/* BIOS_REC */ +PAD_CFG_GPI(GPP_F5, NONE, PLTRST), +/* SD_CD# */ +PAD_CFG_NF(GPP_G5, UP_20K, PWROK, NF1), +/* SD_WP */ +PAD_CFG_NF(GPP_G7, DN_20K, PWROK, NF1), +/* M2_SSD_RST_N */ +PAD_CFG_GPO(GPP_H0, 1, DEEP), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + + +}; + +const struct pad_config *variant_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} diff --git a/src/mainboard/intel/tglrvp/variants/icl_y/include/variant/ec.h b/src/mainboard/intel/tglrvp/variants/icl_y/include/variant/ec.h new file mode 100755 index 0000000..af41bf4 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_y/include/variant/ec.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MAINBOARD_EC_H__ +#define __MAINBOARD_EC_H__ + +#include <baseboard/ec.h> + +#endif /* __MAINBOARD_EC_H__ */ diff --git a/src/mainboard/intel/tglrvp/variants/icl_y/include/variant/gpio.h b/src/mainboard/intel/tglrvp/variants/icl_y/include/variant/gpio.h new file mode 100755 index 0000000..c34a9b3 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_y/include/variant/gpio.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef __MAINBOARD_GPIO_H__ +#define __MAINBOARD_GPIO_H__ + +#include <baseboard/gpio.h> + +#endif /* __MAINBOARD_GPIO_H__ */ diff --git a/src/mainboard/intel/tglrvp/variants/icl_y/include/variant/hda_verb.h b/src/mainboard/intel/tglrvp/variants/icl_y/include/variant/hda_verb.h new file mode 100755 index 0000000..d821a26 --- /dev/null +++ b/src/mainboard/intel/tglrvp/variants/icl_y/include/variant/hda_verb.h @@ -0,0 +1,700 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef HDA_VERB_H +#define HDA_VERB_H + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* ALC 700 */ + 0x10EC0700, + 0xFFFFFFFF, + 0x00000023, + + AZALIA_SUBVENDOR(0, 0x10EC10F2), + AZALIA_PIN_CFG(0, 0x01, 0x00000000), + AZALIA_PIN_CFG(0, 0x12, 0x40000000), + AZALIA_PIN_CFG(0, 0x13, 0x40000000), + AZALIA_PIN_CFG(0, 0x14, 0x411111F0), + AZALIA_PIN_CFG(0, 0x15, 0x411111F0), + AZALIA_PIN_CFG(0, 0x16, 0x411111F0), + AZALIA_PIN_CFG(0, 0x17, 0x90170110), + AZALIA_PIN_CFG(0, 0x18, 0x411111F0), + AZALIA_PIN_CFG(0, 0x19, 0x04A11030), + AZALIA_PIN_CFG(0, 0x1A, 0x411111F0), + AZALIA_PIN_CFG(0, 0x1B, 0x411111F0), + AZALIA_PIN_CFG(0, 0x1D, 0x40622005), + AZALIA_PIN_CFG(0, 0x1E, 0x411111F0), + AZALIA_PIN_CFG(0, 0x1F, 0x411111F0), + AZALIA_PIN_CFG(0, 0x21, 0x04211020), + AZALIA_PIN_CFG(0, 0x29, 0x411111F0), + + /* Widget node 0x20 */ + 0x02050045, + 0x02045289, + 0x0205004A, + 0x0204201B, + /* Widget node 0x20 - 1 */ + 0x05850000, + 0x05843888, + 0x0205006F, + 0x02042C0B, + + //Widget node 0X20 for ALC1305 20160603 update + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040000, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040004, + 0x02050028, + 0x02040600, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204003C, + 0x02050028, + 0x0204FFD0, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040080, + 0x02050028, + 0x02040080, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040080, + 0x02050028, + 0x02040880, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204003A, + 0x02050028, + 0x02040DFE, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006A, + 0x02050028, + 0x0204005D, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006C, + 0x02050028, + 0x02040442, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040005, + 0x02050028, + 0x02040880, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040006, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040008, + 0x02050028, + 0x0204B000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204002E, + 0x02050028, + 0x02040800, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006A, + 0x02050028, + 0x020400C3, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006C, + 0x02050028, + 0x0204D4A0, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006A, + 0x02050028, + 0x020400CC, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006C, + 0x02050028, + 0x0204400A, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006A, + 0x02050028, + 0x020400C1, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006C, + 0x02050028, + 0x02040320, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040039, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204003B, + 0x02050028, + 0x0204FFFF, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204003C, + 0x02050028, + 0x0204FC20, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204003A, + 0x02050028, + 0x02041DFE, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C0, + 0x02050028, + 0x020401FA, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C1, + 0x02050028, + 0x0204DE23, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C2, + 0x02050028, + 0x02041C00, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C3, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C4, + 0x02050028, + 0x02040200, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C5, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C6, + 0x02050028, + 0x020403F5, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C7, + 0x02050028, + 0x0204AF1B, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C8, + 0x02050028, + 0x02041E0A, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400C9, + 0x02050028, + 0x0204368E, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CA, + 0x02050028, + 0x020401FA, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CB, + 0x02050028, + 0x0204DE23, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CC, + 0x02050028, + 0x02041C00, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CD, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CE, + 0x02050028, + 0x02040200, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400CF, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400D0, + 0x02050028, + 0x020403F5, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400D1, + 0x02050028, + 0x0204AF1B, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400D2, + 0x02050028, + 0x02041E0A, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x020400D3, + 0x02050028, + 0x0204368E, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040040, + 0x02050028, + 0x0204800F, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040062, + 0x02050028, + 0x02048000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040063, + 0x02050028, + 0x02044848, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040064, + 0x02050028, + 0x02040800, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040065, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040066, + 0x02050028, + 0x02044004, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040067, + 0x02050028, + 0x02040802, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040068, + 0x02050028, + 0x0204890F, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040069, + 0x02050028, + 0x0204E021, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040070, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040071, + 0x02050000, + 0x02043330, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040072, + 0x02050000, + 0x02043333, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040073, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040074, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040075, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040076, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040050, + 0x02050028, + 0x020402EC, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040051, + 0x02050028, + 0x02044909, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040052, + 0x02050028, + 0x020440B0, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040046, + 0x02050028, + 0x0204C22E, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040047, + 0x02050028, + 0x02040C00, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040048, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040049, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204004A, + 0x02050028, + 0x02040000, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204004B, + 0x02050028, + 0x02041C00, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006A, + 0x02050028, + 0x02040090, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204006C, + 0x02050028, + 0x0204721F, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x0204009E, + 0x02050028, + 0x02040001, + 0x02050029, + 0x0204B024, + + 0x02050024, + 0x02040010, + 0x02050026, + 0x02040004, + 0x02050028, + 0x02040500, + 0x02050029, + 0x0204B024 +}; + +const u32 pc_beep_verbs[] = { +}; +AZALIA_ARRAY_SIZES; +#endif -- To view, visit https://review.coreboot.org/c/coreboot/+/33567 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9cec7925594ff4c60154723e1ffa561d01b5153f Gerrit-Change-Number: 33567 Gerrit-PatchSet: 1 Gerrit-Owner: Wonkyu Kim <wonkyu.kim(a)intel.com> Gerrit-MessageType: newchange

1 1

Change in ...coreboot[master]: [RFC] Initial commit to support SKL SP and OCP Tiogapass platform
by Name of user not set (Code Review) 03 Dec '19

03 Dec '19

Name of user not set #1002246 has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31205 Change subject: [RFC] Initial commit to support SKL SP and OCP Tiogapass platform ...................................................................... [RFC] Initial commit to support SKL SP and OCP Tiogapass platform Summary: This commit adds support for SK SP and OCP Tiogapass platform: * Added microcode files. * Added FSP header files. * Updated skylake soc code to accomodate FSP 2.0. * Added tiogapass platform code to accomodate FSP 2.0. With this commit, it is able to build coreboot.rom image. The 3 FSP binaries are added to the coreboot image. It looks okay by examining the coreboot.rom file through ifdtool command. However, when booting with this image, no postcode is observed on port 80, no UART message shows up. Debugging is on-going. This commit is submitted as draft to enable early review feedback. Change-Id: I389355162eb9515b533a8d7f77cc8f03b8beb019 Signed-off-by: Jonathan Zhang <jonzhang(a)fb.com> test Change-Id: I033a52bc3f0b86f0ec1db8325b7435d20d194fda --- M src/Kconfig M src/drivers/intel/fsp2_0/include/fsp/api.h A src/mainboard/ocp/tiogapass/Kconfig A src/mainboard/ocp/tiogapass/Kconfig.name A src/mainboard/ocp/tiogapass/Makefile.inc A src/mainboard/ocp/tiogapass/acpi/mainboard.asl A src/mainboard/ocp/tiogapass/board_id.c A src/mainboard/ocp/tiogapass/board_id.h A src/mainboard/ocp/tiogapass/board_info.txt A src/mainboard/ocp/tiogapass/bootblock.c A src/mainboard/ocp/tiogapass/cmos.default A src/mainboard/ocp/tiogapass/cmos.layout A src/mainboard/ocp/tiogapass/devicetree.cb A src/mainboard/ocp/tiogapass/dsdt.asl A src/mainboard/ocp/tiogapass/gpio.h A src/mainboard/ocp/tiogapass/pei_data.c A src/mainboard/ocp/tiogapass/ramstage.c A src/mainboard/ocp/tiogapass/romstage.c A src/mainboard/ocp/tiogapass/spd/Makefile.inc A src/mainboard/ocp/tiogapass/spd/spd.h A src/mainboard/ocp/tiogapass/spd/spd_util.c M src/soc/intel/skylake/Kconfig M src/soc/intel/skylake/Makefile.inc M src/soc/intel/skylake/chip_fsp20.c M src/soc/intel/skylake/include/fsp20/soc/ramstage.h M src/soc/intel/skylake/irq.c M src/soc/intel/skylake/romstage/romstage_fsp20.c M src/soc/intel/skylake/vr_config.c M src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/DebugSupport.h A src/vendorcode/intel/fsp/fsp2_0/skykabylake/FirmwareVersionInfoHob.h A src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspUpd.h A src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h A src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h A src/vendorcode/intel/fsp/fsp2_0/skykabylake/FsptUpd.h 34 files changed, 1,968 insertions(+), 162 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/05/31205/1 diff --git a/src/Kconfig b/src/Kconfig index a069f63..7de3335 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -360,6 +360,7 @@ source "src/ec/*/*/Kconfig" # FIXME move to vendorcode source "src/drivers/intel/fsp1_0/Kconfig" +source "src/drivers/intel/fsp2_0/Kconfig" source "src/southbridge/intel/common/firmware/Kconfig" source "src/vendorcode/*/Kconfig" diff --git a/src/drivers/intel/fsp2_0/include/fsp/api.h b/src/drivers/intel/fsp2_0/include/fsp/api.h index 5ed3801..666020a 100644 --- a/src/drivers/intel/fsp2_0/include/fsp/api.h +++ b/src/drivers/intel/fsp2_0/include/fsp/api.h @@ -66,9 +66,9 @@ void platform_fsp_notify_status(enum fsp_notify_phase phase); /* Initialize memory margin analysis settings. */ -void setup_mma(FSP_M_CONFIG *memory_cfg); +void setup_mma(FSPM_CONFIG *memory_cfg); /* Update the SOC specific memory config param for mma. */ -void soc_update_memory_params_for_mma(FSP_M_CONFIG *memory_cfg, +void soc_update_memory_params_for_mma(FSPM_CONFIG *memory_cfg, struct mma_config_param *mma_cfg); /* diff --git a/src/mainboard/ocp/tiogapass/Kconfig b/src/mainboard/ocp/tiogapass/Kconfig new file mode 100644 index 0000000..c411b15 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/Kconfig @@ -0,0 +1,58 @@ +if BOARD_OCP_TIOGAPASS + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_32768 + select CONSOLE_SERIAL + select DRIVERS_UART + select GENERIC_SPD_BIN + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select EC_ACPI + select HAVE_OPTION_TABLE + select HAVE_SMI_HANDLER + select SERIRQ_CONTINUOUS_MODE + select SKYLAKE_SOC_PCH_H + select SOC_INTEL_SKYLAKE + select SUPERIO_NUVOTON_NCT6776 + select SUPERIO_NUVOTON_NCT6776_COM_A + select MAINBOARD_USES_FSP2_0 + select HAVE_CMOS_DEFAULT + + +config PLATFORM_USES_FSP2_0 + bool "FSP driver 2.0" + +config IRQ_SLOT_COUNT + int + default 18 + +config MAINBOARD_DIR + string + default "ocp/tiogapass" + +config MAINBOARD_PART_NUMBER + string + default "Tioga Pass" + +config MAINBOARD_FAMILY + string + default "OCP_TiogaPass" + +config CBFS_SIZE + hex + default 0x1000000 + +config VIRTUAL_ROM_SIZE + hex + default 0x2000000 + +config MAX_CPUS + int + default 8 + +config TPM_PIRQ + hex + default 0x18 # GPP_E0_IRQ + +endif # BOARD_OCP_TIOGAPASS diff --git a/src/mainboard/ocp/tiogapass/Kconfig.name b/src/mainboard/ocp/tiogapass/Kconfig.name new file mode 100644 index 0000000..0c57fd3 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_OCP_TIOGAPASS + bool "Tioga Pass" diff --git a/src/mainboard/ocp/tiogapass/Makefile.inc b/src/mainboard/ocp/tiogapass/Makefile.inc new file mode 100644 index 0000000..77cdb16 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## Copyright (C) 2016 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +subdirs-y += spd + +bootblock-y += bootblock.c +romstage-y += pei_data.c +romstage-y += board_id.c + +ramstage-y += ramstage.c diff --git a/src/mainboard/ocp/tiogapass/acpi/mainboard.asl b/src/mainboard/ocp/tiogapass/acpi/mainboard.asl new file mode 100644 index 0000000..5174eeb --- /dev/null +++ b/src/mainboard/ocp/tiogapass/acpi/mainboard.asl @@ -0,0 +1,17 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/gpio.h> diff --git a/src/mainboard/ocp/tiogapass/board_id.c b/src/mainboard/ocp/tiogapass/board_id.c new file mode 100644 index 0000000..a362b08 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/board_id.c @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include "board_id.h" +#include <ec/acpi/ec.h> +#include <stdint.h> + +/* + * Get Board ID via EC I/O port write/read + */ +int get_board_id(void) +{ + uint8_t buffer[2]; + uint8_t index; + if (send_ec_command(EC_FAB_ID_CMD) == 0) { + for (index = 0; index < sizeof(buffer); index++) + buffer[index] = recv_ec_data(); + return (buffer[1] << 8) | buffer[0]; + } + return -1; +} diff --git a/src/mainboard/ocp/tiogapass/board_id.h b/src/mainboard/ocp/tiogapass/board_id.h new file mode 100644 index 0000000..881866f --- /dev/null +++ b/src/mainboard/ocp/tiogapass/board_id.h @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MAINBOARD_BOARD_ID_H_ +#define _MAINBOARD_BOARD_ID_H_ + +/* Mobile Board Id 0x00 - 0xFF */ +#define BOARD_ID_SKL_A0_RVP3 0x04 +#define BOARD_ID_SKL_RVP7 0x0B + +/* 60-6F reserved for KBL RVPs */ +#define BOARD_ID_KBL_LPDDR3_RVP3 0x60 +#define BOARD_ID_KBL_LPDDR3_RVP7 0x64 + +/* Board/FAB ID Command */ +#define EC_FAB_ID_CMD 0x0D + +/* + * Returns board information (board id[15:8] and + * Fab info[7:0]) on success and < 0 on error + */ +int get_board_id(void); + +#endif /* _MAINBOARD_BOARD_ID_H_ */ diff --git a/src/mainboard/ocp/tiogapass/board_info.txt b/src/mainboard/ocp/tiogapass/board_info.txt new file mode 100644 index 0000000..25dac38 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/board_info.txt @@ -0,0 +1,5 @@ +Board name: Tioga Pass +Category: server +ROM protocol: SPI +ROM socketed: yes +Release year: 2017 diff --git a/src/mainboard/ocp/tiogapass/bootblock.c b/src/mainboard/ocp/tiogapass/bootblock.c new file mode 100644 index 0000000..cf9740d --- /dev/null +++ b/src/mainboard/ocp/tiogapass/bootblock.c @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2016 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <bootblock_common.h> +#include <soc/gpio.h> +#include "gpio.h" + +#include <superio/nuvoton/common/nuvoton.h> +#include <superio/nuvoton/nct6776/nct6776.h> + +#define SERIAL_DEV PNP_DEV(0x2e, NCT6776_SP1) + +static void early_config_gpio(void) +{ + /* This is a hack for FSP because it does things in MemoryInit() + * which it shouldn't do. We have to prepare certain gpios here + * because of the brokenness in FSP. */ + gpio_configure_pads(early_gpio_table, ARRAY_SIZE(early_gpio_table)); +} + +void bootblock_mainboard_init(void) +{ + early_config_gpio(); +} + +void bootblock_mainboard_early_init(void) +{ + nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); +} diff --git a/src/mainboard/ocp/tiogapass/cmos.default b/src/mainboard/ocp/tiogapass/cmos.default new file mode 100644 index 0000000..cd8bd47 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/cmos.default @@ -0,0 +1,4 @@ +boot_option=Fallback +debug_level=Spew +power_on_after_fail=Disable +nmi=Enable diff --git a/src/mainboard/ocp/tiogapass/cmos.layout b/src/mainboard/ocp/tiogapass/cmos.layout new file mode 100644 index 0000000..83a2e05 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/cmos.layout @@ -0,0 +1,117 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2016 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +388 4 h 0 reboot_counter +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 r 0 unused +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +#401 7 r 0 unused + +# coreboot config options: southbridge +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +#544 440 r 0 unused + + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +6 0 Emergency +6 1 Alert +6 2 Critical +6 3 Error +6 4 Warning +6 5 Notice +6 6 Info +6 7 Debug +6 8 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/ocp/tiogapass/devicetree.cb b/src/mainboard/ocp/tiogapass/devicetree.cb new file mode 100644 index 0000000..9b23a0e --- /dev/null +++ b/src/mainboard/ocp/tiogapass/devicetree.cb @@ -0,0 +1,293 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2017 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip soc/intel/skylake + + # Enable deep Sx states + register "deep_s5_enable_ac" = "0" + register "deep_s5_enable_dc" = "0" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # FSP Configuration + register "EnableAzalia" = "1" + register "DspEnable" = "1" + register "IoBufferOwnership" = "3" + register "SmbusEnable" = "1" + register "ScsEmmcEnabled" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "0" + register "Heci3Enabled" = "0" + + register "SaGv" = "3" + register "PmTimerDisabled" = "0" + + # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch + # SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s + register "PmConfigSlpS3MinAssert" = "0x02" + + # SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s + register "PmConfigSlpS4MinAssert" = "0x04" + + # SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s + register "PmConfigSlpSusMinAssert" = "0x03" + + # SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s + register "PmConfigSlpAMinAssert" = "0x03" + + # Determines if enable Serial IRQ. Values 0: Disabled, 1: Enabled + register "SerialIrqConfigSirqEnable" = "0x01" + register "SerialIrqConfigSirqMode" = "0x01" + + # VR Settings Configuration for 5 Domains + #+----------------+-------+-------+-------------+-------------+-------+ + #| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT | + #+----------------+-------+-------+-------------+-------------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------------+-------------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x10, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x1C, \ + .voltage_limit = 0x5F0 \ + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x88, \ + .voltage_limit = 0x5F0 \ + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x8C ,\ + .voltage_limit = 0x5F0 \ + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x8C, \ + .voltage_limit = 0x5F0 \ + }" + + # Skip coreboot MP Init + register "common_soc_config" = "{ + .use_fsp_mp_init = 1, + }" + + # Enable x1 slot + register "PcieRpEnable[7]" = "1" + register "PcieRpClkReqSupport[7]" = "1" + register "PcieRpClkReqNumber[7]" = "3" #uses SRCCLKREQ3 + + # Enable x4 slot + register "PcieRpEnable[8]" = "1" + register "PcieRpClkReqSupport[8]" = "1" + register "PcieRpClkReqNumber[8]" = "4" #uses SRCCLKREQ4 + + # Enable Root port 6 and 13. + register "PcieRpEnable[5]" = "1" + register "PcieRpEnable[12]" = "1" + + # Enable CLKREQ# + register "PcieRpClkReqSupport[5]" = "1" + register "PcieRpClkReqSupport[12]" = "1" + + # RP 6 uses SRCCLKREQ1# while RP `3 uses SRCCLKREQ2# + register "PcieRpClkReqNumber[5]" = "0" + register "PcieRpClkReqNumber[12]" = "1" + + register "EnableLan" = "1" + + # USB related + register "SsicPortEnable" = "1" + + register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # OTG + register "usb2_ports[1]" = "USB2_PORT_MID(OC3)" # Touch Pad + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # M.2 BT + register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Touch Panel + register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN + register "usb2_ports[5]" = "USB2_PORT_MID(OC0)" # Front Panel + register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" # Front Panel + register "usb2_ports[7]" = "USB2_PORT_MID(OC2)" # Stacked conn (lan + usb) + register "usb2_ports[8]" = "USB2_PORT_MID(OC2)" # Stacked conn (lan + usb) + register "usb2_ports[9]" = "USB2_PORT_MID(OC1)" # LAN MAGJACK + register "usb2_ports[10]" = "USB2_PORT_MID(OC1)" # LAN MAGJACK + register "usb2_ports[11]" = "USB2_PORT_MID(OC_SKIP)" # Finger print sensor + register "usb2_ports[12]" = "USB2_PORT_MID(OC4)" # USB 2 stack conn + register "usb2_ports[13]" = "USB2_PORT_MID(OC4)" # USB 2 stack conn + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC5)" # OTG + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # Flex + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # IVCAM + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)" # LAN MAGJACK + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC0)" # Front Panel + register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC0)" # Front Panel + register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC2)" # Stack Conn + register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC2)" # Stack Conn + register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC1)" # LAN MAGJACK + + register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V + + # Must leave UART0 enabled or SD/eMMC will not work as PCI + + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x0a" + register "pirqc_routing" = "0x0b" + register "pirqd_routing" = "0x0b" + register "pirqe_routing" = "0x0b" + register "pirqf_routing" = "0x0b" + register "pirqg_routing" = "0x0b" + register "pirqh_routing" = "0x0b" + + register "PmTimerDisabled" = "0" + + register "EnableSata" = "1" + register "SataSalpSupport" = "1" + register "SataPortsEnable" = "{ \ + [0] = 1, \ + [1] = 1, \ + [2] = 1, \ + [3] = 1, \ + [4] = 1, \ + [5] = 1, \ + [6] = 1, \ + [7] = 1, \ + }" + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoPci, \ + [PchSerialIoIndexI2C1] = PchSerialIoPci, \ + [PchSerialIoIndexI2C2] = PchSerialIoPci, \ + [PchSerialIoIndexI2C3] = PchSerialIoPci, \ + [PchSerialIoIndexI2C4] = PchSerialIoPci, \ + [PchSerialIoIndexI2C5] = PchSerialIoPci, \ + [PchSerialIoIndexSpi0] = PchSerialIoPci, \ + [PchSerialIoIndexSpi1] = PchSerialIoPci, \ + [PchSerialIoIndexUart0] = PchSerialIoPci, \ + [PchSerialIoIndexUart1] = PchSerialIoPci, \ + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, \ + }" + + # PL2 override 25W + register "tdp_pl2_override" = "25" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + # Enable/Disable VMX feature + register "VmxEnable" = "0" + # Use default SD card detect GPIO configuration + #register "sdcard_cd_gpio_default" = "GPP_A7" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C #0 + device pci 15.1 on end # I2C #1 + device pci 15.2 on end # I2C #2 + device pci 15.3 on end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 on end # I2C #5 + device pci 19.2 on end # I2C #4 + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 on end # UART #1 + device pci 1e.2 on end # GSPI #0 + device pci 1e.3 on end # GSPI #1 + device pci 1e.4 off end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 off end # SDCard + device pci 1f.0 on + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 on end # GbE + end +end diff --git a/src/mainboard/ocp/tiogapass/dsdt.asl b/src/mainboard/ocp/tiogapass/dsdt.asl new file mode 100644 index 0000000..45d9a85 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/dsdt.asl @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2016 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x05, // DSDT revision: ACPI v5.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include <soc/intel/skylake/acpi/platform.asl> + + // global NVS and variables + #include <soc/intel/skylake/acpi/globalnvs.asl> + + // CPU + #include <soc/intel/skylake/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <soc/intel/skylake/acpi/systemagent.asl> + #include <soc/intel/skylake/acpi/pch.asl> + } + } + + // Chipset specific sleep states + #include <soc/intel/skylake/acpi/sleepstates.asl> + + // Mainboard specific + #include "acpi/mainboard.asl" +} diff --git a/src/mainboard/ocp/tiogapass/gpio.h b/src/mainboard/ocp/tiogapass/gpio.h new file mode 100644 index 0000000..f8db6cd --- /dev/null +++ b/src/mainboard/ocp/tiogapass/gpio.h @@ -0,0 +1,183 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef _GPIORVP8_H +#define _GPIORVP8_H + +#include <soc/gpe.h> +#include <soc/gpio.h> + +/* TCA6424A I/O Expander */ +#define IO_EXPANDER_BUS 4 +#define IO_EXPANDER_0_ADDR 0x22 +#define IO_EXPANDER_P0CONF 0x0C /* Port 0 conf offset */ +#define IO_EXPANDER_P0DOUT 0x04 /* Port 0 data offset */ +#define IO_EXPANDER_P1CONF 0x0D +#define IO_EXPANDER_P1DOUT 0x05 +#define IO_EXPANDER_P2CONF 0x0E +#define IO_EXPANDER_P2DOUT 0x06 +#define IO_EXPANDER_1_ADDR 0x23 + +/* GPE_EC_WAKE */ +#define GPE_EC_WAKE GPE0_LAN_WAK +#define EC_SMI_GPI GPP_I3 + +/* + * Gpio based irq for touchpad, 18th index in North Bank + * MAX_DIRECT_IRQ + GPSW_SIZE + 19 + */ +#define KBLRVP_TOUCHPAD_IRQ 33 + +#define KBLRVP_TOUCH_IRQ 31 + +#define BOARD_TOUCHPAD_NAME "touchpad" +#define BOARD_TOUCHPAD_IRQ KBLRVP_TOUCHPAD_IRQ +#define BOARD_TOUCHPAD_I2C_BUS 0 +#define BOARD_TOUCHPAD_I2C_ADDR 0x20 + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ KBLRVP_TOUCH_IRQ +#define BOARD_TOUCHSCREEN_I2C_BUS 0 +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4c + +#ifndef __ACPI__ + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { +/* EC_PCH_RCIN */ PAD_CFG_NF(GPP_A0, NONE, DEEP, NF3), +/* EC_LPC_IO0 */ PAD_CFG_NF(GPP_A1, 20K_PU, DEEP, NF3), +/* EC_LPC_IO1*/ PAD_CFG_NF(GPP_A2, 20K_PU, DEEP, NF3), +/* EC_LPC_IO2 */ PAD_CFG_NF(GPP_A3, 20K_PU, DEEP, NF3), +/* EC_LPC_IO3 */ PAD_CFG_NF(GPP_A4, 20K_PU, DEEP, NF3), +/* LPC_FRAME */ PAD_CFG_NF(GPP_A5, NONE, DEEP, NF3), +/* LPC_SERIRQ */ PAD_CFG_NF(GPP_A6, NONE, DEEP, NF3), +/* PIRQAB */ PAD_CFG_GPI(GPP_A7, NONE, DEEP), +/* LPC_CLKRUN */ PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), +/* EC_LPC_CLK */ PAD_CFG_NF(GPP_A9, NONE, DEEP, NF3), +/* PCH_LPC_CLK */ PAD_CFG_NF(GPP_A10, 20K_PD, DEEP, NF1), +/* PMEB */ PAD_CFG_GPI(GPP_A11, NONE, DEEP), +/* SUS_PWR_ACK_R */ PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), +/* PM_SUS_ESPI_RST */ PAD_CFG_NF(GPP_A14, NONE, DEEP, NF3), +/* PCH_SUSACK */ PAD_CFG_NF(GPP_A15, 20K_PU, DEEP, NF1), +/* BT_RF_KILL */ PAD_CFG_GPO(GPP_B3, 1, DEEP), +/* EXTTS_SNI_DRV1 */ PAD_CFG_NF(GPP_B4, NONE, DEEP, NF1), +/* SRCCLKREQ0# */ PAD_CFG_GPI_ACPI_SCI(GPP_B5, NONE, DEEP, YES), +/* PM_SLP_S0 */ PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), +/* PCH_PLT_RST */ PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), +/* GPP_B_14_SPKR */ PAD_CFG_NF(GPP_B14, 20K_PD, DEEP, NF1), +/* GSPI0_MISO */ PAD_CFG_GPO(GPP_B17, 1, DEEP), +/* PCHHOTB */ PAD_CFG_NF(GPP_B23, 20K_PD, DEEP, NF2), +/* SMB_CLK */ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), +/* SMB_DATA */ PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), +/* SMBALERT# */ PAD_CFG_GPO(GPP_C2, 1, DEEP), +/* SML0_CLK */ PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), +/* SML0_DATA */ PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), +/* SML1_CLK */ PAD_CFG_NF(GPP_C6, NONE, DEEP, NF1), +/* SML1_DATA */ PAD_CFG_NF(GPP_C7, NONE, DEEP, NF1), +/* UART0_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), +/* UART0_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), +/* UART0_RTS_N */ PAD_CFG_NF(GPP_C10, NONE, DEEP, NF1), +/* UART0_CTS_N */ PAD_CFG_NF(GPP_C11, NONE, DEEP, NF1), +/* GD_UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), +/* GD_UART2_TXD */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), +/* UART2_RTS_N */ PAD_CFG_NF(GPP_C22, NONE, DEEP, NF1), +/* UART2_CTS_N */ PAD_CFG_NF(GPP_C23, NONE, DEEP, NF1), +/* SSP0_SFRM */ PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1), +/* SSP0_TXD */ PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1), +/* SSP0_RXD */ PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1), +/* SSP0_SCLK */ PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1), +/* SATAE_IFDET */ PAD_CFG_NF(GPP_E0, 20K_PU, DEEP, NF1), +/* SATAE_IFDET */ PAD_CFG_NF(GPP_E1, 20K_PU, DEEP, NF1), +/* CPU_GP0 */ PAD_CFG_NF(GPP_E3, NONE, DEEP, NF1), +/* SSD_SATA_DEVSLP */ PAD_CFG_NF(GPP_E4, NONE, DEEP, NF1), +/* SATALED# */ PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1), +/* USB2_OC_0 */ PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), +/* USB2_OC_1 */ PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), +/* USB2_OC_2 */ PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), +/* USB2_OC_3 */ PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), +/* SATAXPCIE_4 */ PAD_CFG_NF(GPP_F1, 20K_PU, DEEP,NF1), +/* SATA_DEVSLP_3 */ PAD_CFG_GPI_ACPI_SCI(GPP_F5, NONE, DEEP, YES), +/* SATA_DEVSLP_4 */ PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1), +/* SATA_SCLOCK */ PAD_CFG_GPI_APIC(GPP_F10, NONE, DEEP), +/* SATA_SLOAD */ PAD_CFG_GPI(GPP_F11, NONE, DEEP), +/* SATA_SDATAOUT1 */ PAD_CFG_GPI_APIC(GPP_F12, NONE, DEEP), +/* SATA_SDATAOUT0 */ PAD_CFG_GPI_APIC(GPP_F13, NONE, DEEP), +/* H_SKTOCC_N */ PAD_CFG_GPI_APIC(GPP_F14, NONE, DEEP), +/* USB_OC4_R_N */ PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), +/* USB_OC5_R_N */ PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), +/* USB_OC6_R_N */ PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), +/* USB_OC7_R_N */ PAD_CFG_GPO(GPP_F18, 1, DEEP), +/* GPIO_PEG_RESET */ PAD_CFG_GPO(GPP_F22, 1, DEEP), +/* VCORE_VBOOST_CTRL */ PAD_CFG_GPO(GPP_F23, 0, DEEP), +/* FAN_TACH_0 */ PAD_CFG_GPO(GPP_G0, 1, DEEP), +/* FAN_TACH_1 */ PAD_CFG_GPO(GPP_G1, 1, DEEP), +/* FAN_TACH_2 */ PAD_CFG_GPI_ACPI_SCI(GPP_G2, NONE, DEEP, YES), +/* FAN_TACH_3 */ PAD_CFG_GPI_ACPI_SCI(GPP_G3, NONE, DEEP, YES), +/* FAN_TACH_4 */ PAD_CFG_GPO(GPP_G4, 1, DEEP), +/* FAN_TACH_5 */ PAD_CFG_GPI_APIC(GPP_G5, NONE, DEEP), +/* FAN_TACH_6 */ PAD_CFG_GPI_ACPI_SCI(GPP_G6, NONE, DEEP, YES), +/* FAN_TACH_7 */ PAD_CFG_GPO(GPP_G7, 1, DEEP), +/* GSXDOUT */ PAD_CFG_GPI_ACPI_SCI(GPP_G12, 20K_PD, DEEP, YES), +/* GSXSLOAD */ PAD_CFG_GPO(GPP_G13, 1, DEEP), +/* GSXDIN */ PAD_CFG_GPI_ACPI_SCI(GPP_G14, NONE, DEEP, YES), +/* GSXSRESETB */ PAD_CFG_GPO(GPP_G15, 0, DEEP), +/* GSXCLK */ PAD_CFG_GPO(GPP_G16, 0, DEEP), +/* NMIB */ PAD_CFG_GPI_APIC(GPP_G18, NONE, DEEP), +/* SMIB */ PAD_CFG_NF(GPP_G19, NONE, DEEP, NF1), +/* TEST_SETUP_MENU */ PAD_CFG_GPI_APIC(GPP_G20, NONE, DEEP), +/* P_INTF_N */ PAD_CFG_GPI_ACPI_SCI(GPP_G21, NONE, DEEP, YES), +/* PCH_PEGSLOT1 */ PAD_CFG_GPO(GPP_G22, 1, DEEP), +/* IVCAM_DFU_R */ PAD_CFG_GPO(GPP_G23, 1, DEEP), +/* SRCCLKREQB_8 */ PAD_CFG_NF(GPP_H2, NONE, DEEP, NF1), +/* SML2CLK */ PAD_CFG_GPI(GPP_H10, NONE, DEEP), +/* SML2DATA */ PAD_CFG_GPI(GPP_H11, NONE, DEEP), +/* SML3CLK */ PAD_CFG_GPI_APIC(GPP_H13, NONE, DEEP), +/* SML3DATA */ PAD_CFG_GPI_APIC(GPP_H14, NONE, DEEP), +/* SML3ALERTB */ PAD_CFG_GPI_APIC(GPP_H15, NONE, DEEP), +/* SML4DATA */ PAD_CFG_GPO(GPP_H17, 1, DEEP), +/* LED_DRIVE */ PAD_CFG_GPO(GPP_H23, 0, DEEP), +/* DDSP_HPD_0 */ PAD_CFG_NF(GPP_I0, NONE, DEEP, NF1), +/* DDSP_HPD_1 */ PAD_CFG_NF(GPP_I1, NONE, DEEP, NF1), +/* DDSP_HPD_2 */ PAD_CFG_NF(GPP_I2, NONE, DEEP, NF1), +/* DDSP_HPD_1 */ PAD_CFG_GPI_ACPI_SMI(GPP_I3, NONE, DEEP, YES), +/* DDPB_CTRLCLK */ PAD_CFG_NF(GPP_I5, NONE, DEEP, NF1), +/* DDPB_CTRLDATA */ PAD_CFG_NF(GPP_I6, 20K_PD, DEEP, NF1), +/* DDPC_CTRLCLK */ PAD_CFG_NF(GPP_I7, NONE, DEEP, NF1), +/* DDPC_CTRLDATA */ PAD_CFG_NF(GPP_I8, 20K_PD, DEEP, NF1), +/* DDPD_CTRLCLK */ PAD_CFG_NF(GPP_I9, NONE, DEEP, NF1), +/* DDPD_CTRLDATA */ PAD_CFG_NF(GPP_I10, 20K_PD, DEEP, NF1), +/* EC_PCH_ACPRESENT */ PAD_CFG_GPO(GPD1, 0, DEEP), +/* EC_PCH_WAKE */ PAD_CFG_NF(GPD2, NONE, DEEP, NF1), +/* PM_PWRBTN_R_N */ PAD_CFG_NF(GPD3, 20K_PU, DEEP, NF1), +/* PM_SLP_S3# */ PAD_CFG_NF(GPD4, NONE, DEEP, NF1), +/* PM_SLP_S4# */ PAD_CFG_NF(GPD5, NONE, DEEP, NF1), +/* PM_SLP_SA# */ PAD_CFG_NF(GPD6, NONE, DEEP, NF1), +/* USB_WAKEOUT_N */ PAD_CFG_NF(GPD7, NONE, DEEP, NF1), +/* PM_SUSCLK */ PAD_CFG_NF(GPD8, NONE, DEEP, NF1), +/* PCH_SLP_WLAN# */ PAD_CFG_NF(GPD9, NONE, DEEP, NF1), +/* PM_SLP_S5# */ PAD_CFG_NF(GPD10, NONE, DEEP, NF1), +/* LANPHYC */ PAD_CFG_NF(GPD11, NONE, DEEP, NF1), + +}; + +/* Early pad configuration in romstage. */ +static const struct pad_config early_gpio_table[] = { +/* UART0_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), +/* UART0_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), +}; + + +#endif +#endif diff --git a/src/mainboard/ocp/tiogapass/pei_data.c b/src/mainboard/ocp/tiogapass/pei_data.c new file mode 100644 index 0000000..ac4ce95 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/pei_data.c @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/pei_data.h> +#include <soc/pei_wrapper.h> +#include "spd/spd.h" + +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + mainboard_fill_dq_map_data(&pei_data->dq_map); + mainboard_fill_dqs_map_data(&pei_data->dqs_map); + mainboard_fill_rcomp_res_data(&pei_data->RcompResistor); + mainboard_fill_rcomp_strength_data(&pei_data->RcompTarget); +} diff --git a/src/mainboard/ocp/tiogapass/ramstage.c b/src/mainboard/ocp/tiogapass/ramstage.c new file mode 100644 index 0000000..6fef017 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/ramstage.c @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <bootstate.h> +#include <console/console.h> +#include <device/i2c_simple.h> +#include <soc/ramstage.h> +#include "gpio.h" + +void mainboard_silicon_init_params(FSP_SIL_UPD *params) +{ + /* Configure pads prior to SiliconInit() in case there's any + * dependencies during hardware initialization. */ + gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); +// params->CdClock = 3; + + /* Enable Virtual Channel 1 */ +// params->PchHdaVcType = 0x1; +} + +static void ioexpander_init(void *unused) +{ + printk(BIOS_DEBUG, "Programming TCA6424A I/O expander\n"); + + /* I/O Expander 1, Port 0 Data */ + i2c_writeb(IO_EXPANDER_BUS, IO_EXPANDER_0_ADDR, IO_EXPANDER_P0DOUT, + 0xF7); + /* Port 0 Configuration */ + i2c_writeb(IO_EXPANDER_BUS, IO_EXPANDER_0_ADDR, IO_EXPANDER_P0CONF, + 0xE0); + + /* Port 1 Data */ + i2c_writeb(IO_EXPANDER_BUS, IO_EXPANDER_0_ADDR, IO_EXPANDER_P1DOUT, + 0x9E); + /* Port 1 Configuration */ + i2c_writeb(IO_EXPANDER_BUS, IO_EXPANDER_0_ADDR, IO_EXPANDER_P1CONF, + 0x8C); + + /* Port 2 Data */ + i2c_writeb(IO_EXPANDER_BUS, IO_EXPANDER_0_ADDR, IO_EXPANDER_P2DOUT, + 0xDA); + /* Port 2 Configuration */ + i2c_writeb(IO_EXPANDER_BUS, IO_EXPANDER_0_ADDR, IO_EXPANDER_P2CONF, + 0x08); + + /* I/O Expander 2, Port 0 Data */ + i2c_writeb(IO_EXPANDER_BUS, IO_EXPANDER_1_ADDR, IO_EXPANDER_P0DOUT, + 0xFF); + /* Port 0 Configuration */ + i2c_writeb(IO_EXPANDER_BUS, IO_EXPANDER_1_ADDR, IO_EXPANDER_P0CONF, + 0x00); + +} + +BOOT_STATE_INIT_ENTRY(BS_POST_DEVICE, BS_ON_EXIT, ioexpander_init, NULL); diff --git a/src/mainboard/ocp/tiogapass/romstage.c b/src/mainboard/ocp/tiogapass/romstage.c new file mode 100644 index 0000000..230cc50 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/romstage.c @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/byteorder.h> +#include <cbfs.h> +#include <console/console.h> +#include <fsp/api.h> +#include <gpio.h> +#include "gpio.h" +#include <soc/romstage.h> +#include <soc/gpio.h> +#include "spd/spd.h" +#include <string.h> +#include <spd_bin.h> +#include "board_id.h" + + +void mainboard_memory_init_params(FSPM_UPD *mupd) +{ + FSPM_CONFIG *mem_cfg; + mem_cfg = &mupd->FspmConfig; + u8 spd_index = (get_board_id() >> 5) & 0x7; + + printk(BIOS_INFO, "SPD index %d\n", spd_index); +/* + mainboard_fill_dq_map_data(&mem_cfg->DqByteMapCh0); + mainboard_fill_dqs_map_data(&mem_cfg->DqsMapCpu2DramCh0); + mainboard_fill_rcomp_res_data(&mem_cfg->RcompResistor); + mainboard_fill_rcomp_strength_data(&mem_cfg->RcompTarget); +*/ + if (IS_ENABLED(CONFIG_BOARD_INTEL_KBLRVP3)) { + struct region_device spd_rdev; + +// mem_cfg->DqPinsInterleaved = 0; + if (get_spd_cbfs_rdev(&spd_rdev, spd_index) < 0) + die("spd.bin not found\n"); +// mem_cfg->MemorySpdDataLen = region_device_sz(&spd_rdev); + /* Memory leak is ok since we have memory mapped boot media */ +// mem_cfg->MemorySpdPtr00 = (uintptr_t)rdev_mmap_full(&spd_rdev); + } else { /* CONFIG_BOARD_INTEL_KBLRVP7 and CONFIG_BOARD_INTEL_KBLRVP8 */ + struct spd_block blk = { + .addr_map = { 0x50, 0x51, 0x52, 0x53, }, + }; + +// mem_cfg->DqPinsInterleaved = 1; + get_spd_smbus(&blk); +// mem_cfg->MemorySpdDataLen = blk.len; +// mem_cfg->MemorySpdPtr00 = (uintptr_t)blk.spd_array[0]; +// mem_cfg->MemorySpdPtr10 = (uintptr_t)blk.spd_array[2]; + if (IS_ENABLED(CONFIG_BOARD_INTEL_KBLRVP8)) { +// mem_cfg->MemorySpdPtr01 = (uintptr_t)blk.spd_array[1]; +// mem_cfg->MemorySpdPtr11 = (uintptr_t)blk.spd_array[3]; + } + + } +// mupd->FspmTestConfig.DmiVc1 = 1; +// if (IS_ENABLED(CONFIG_BOARD_INTEL_KBLRVP8)) +// mem_cfg->UserBd = BOARD_TYPE_DESKTOP; +} diff --git a/src/mainboard/ocp/tiogapass/spd/Makefile.inc b/src/mainboard/ocp/tiogapass/spd/Makefile.inc new file mode 100644 index 0000000..721736d --- /dev/null +++ b/src/mainboard/ocp/tiogapass/spd/Makefile.inc @@ -0,0 +1,17 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2014 Google Inc. +## Copyright (C) 2015 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +romstage-y += spd_util.c diff --git a/src/mainboard/ocp/tiogapass/spd/spd.h b/src/mainboard/ocp/tiogapass/spd/spd.h new file mode 100644 index 0000000..a5f1af3 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/spd/spd.h @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef MAINBOARD_SPD_H +#define MAINBOARD_SPD_H + +#define RCOMP_TARGET_PARAMS 0x5 + +void mainboard_fill_dq_map_data(void *dq_map_ptr); +void mainboard_fill_dqs_map_data(void *dqs_map_ptr); +void mainboard_fill_rcomp_res_data(void *rcomp_ptr); +void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr); + +#endif diff --git a/src/mainboard/ocp/tiogapass/spd/spd_util.c b/src/mainboard/ocp/tiogapass/spd/spd_util.c new file mode 100644 index 0000000..2c26d78 --- /dev/null +++ b/src/mainboard/ocp/tiogapass/spd/spd_util.c @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <string.h> +#include <soc/pei_data.h> +#include <soc/pei_wrapper.h> +#include "spd.h" + +void mainboard_fill_dq_map_data(void *dq_map_ptr) +{ + /* DQ byte map */ + const u8 dq_map[2][12] = { + { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0, + 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 }, + { 0x33, 0xCC, 0x00, 0xCC, 0x33, 0xCC, + 0x33, 0x00, 0xFF, 0x00, 0xFF, 0x00 } }; + memcpy(dq_map_ptr, dq_map, sizeof(dq_map)); +} + +void mainboard_fill_dqs_map_data(void *dqs_map_ptr) +{ + /* DQS CPU<>DRAM map */ + const u8 dqs_map[2][8] = { + { 0, 1, 3, 2, 4, 5, 6, 7 }, + { 1, 0, 4, 5, 2, 3, 6, 7 } }; + memcpy(dqs_map_ptr, dqs_map, sizeof(dqs_map)); +} + +void mainboard_fill_rcomp_res_data(void *rcomp_ptr) +{ + /* Rcomp resistor */ + const u16 RcompResistor[3] = { 121, 81, 100 }; + memcpy(rcomp_ptr, RcompResistor, sizeof(RcompResistor)); +} + +void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr) +{ + /* Rcomp target */ + static const u16 RcompTarget[RCOMP_TARGET_PARAMS] = { + 100, 40, 20, 20, 26 }; + memcpy(rcomp_strength_ptr, RcompTarget, sizeof(RcompTarget)); +} diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig index 506a041..f1f03d7 100644 --- a/src/soc/intel/skylake/Kconfig +++ b/src/soc/intel/skylake/Kconfig @@ -20,6 +20,7 @@ select ARCH_RAMSTAGE_X86_32 select ARCH_ROMSTAGE_X86_32 select ARCH_VERSTAGE_X86_32 + select BOOTBLOCK_CONSOLE select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if BOOT_DEVICE_SPI_FLASH select BOOT_DEVICE_SUPPORTS_WRITES select CACHE_MRC_SETTINGS @@ -28,43 +29,40 @@ select COMMON_FADT select CPU_INTEL_FIRMWARE_INTERFACE_TABLE select C_ENVIRONMENT_BOOTBLOCK - select FSP_M_XIP if MAINBOARD_USES_FSP2_0 - select FSP_T_XIP if FSP_CAR select GENERIC_GPIO_LIB select HAVE_FSP_GOP - select INTEL_DESCRIPTOR_MODE_CAPABLE + select HAVE_INTEL_FIRMWARE select HAVE_MONOTONIC_TIMER select HAVE_SMI_HANDLER - select INTEL_CAR_NEM_ENHANCED select INTEL_GMA_ACPI select IOAPIC select MRC_SETTINGS_PROTECT select NO_FIXED_XIP_ROM_SIZE select PARALLEL_MP select PARALLEL_MP_AP_WORK + select PCIEXP_ASPM + select PCIEXP_CLK_PM + select PCIEXP_COMMON_CLOCK + select PCIEXP_L1_SUB_STATE select PCIEX_LENGTH_64MB select REG_SCRIPT + select RTC select SA_ENABLE_DPR select SMM_TSEG select SMP - select PMC_GLOBAL_RESET_ENABLE_LOCK select SOC_INTEL_COMMON select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE select SOC_INTEL_COMMON_BLOCK - select SOC_INTEL_COMMON_BLOCK_CAR select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG select SOC_INTEL_COMMON_BLOCK_CPU select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT - select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT select SOC_INTEL_COMMON_BLOCK_GPIO_LEGACY_MACROS select SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL select SOC_INTEL_COMMON_BLOCK_GSPI - select SOC_INTEL_COMMON_BLOCK_HDA select SOC_INTEL_COMMON_BLOCK_SA select SOC_INTEL_COMMON_BLOCK_SGX select SOC_INTEL_COMMON_BLOCK_SMM select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP - select SOC_INTEL_COMMON_BLOCK_UART select SOC_INTEL_COMMON_BLOCK_VMX select SOC_INTEL_COMMON_PCH_BASE select SOC_INTEL_COMMON_NHLT @@ -76,10 +74,6 @@ select TSC_SYNC_MFENCE select UDELAY_TSC -config CPU_INTEL_NUM_FIT_ENTRIES - int - default 10 - config MAINBOARD_USES_FSP2_0 bool default n @@ -88,7 +82,7 @@ def_bool y depends on MAINBOARD_USES_FSP2_0 select PLATFORM_USES_FSP2_0 - select UDK_2015_BINDING + select UDK_2017_BINDING select INTEL_GMA_ADD_VBT if RUN_FSP_GOP select POSTCAR_CONSOLE select POSTCAR_STAGE @@ -98,7 +92,6 @@ depends on !MAINBOARD_USES_FSP2_0 select PLATFORM_USES_FSP1_1 select DISPLAY_FSP_ENTRY_POINTS - select SKIP_FSP_CAR config CHROMEOS select CHROMEOS_RAMOOPS_DYNAMIC @@ -112,6 +105,10 @@ select VBOOT_VBNV_CMOS select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH +config BOOTBLOCK_RESETS + string + default "soc/intel/common/reset.c" + config CBFS_SIZE hex default 0x200000 @@ -124,6 +121,10 @@ hex default 0xfef00000 +config BOOTBLOCK_CPU_INIT + string + default "soc/intel/skylake/bootblock/bootblock.c" + config DCACHE_RAM_SIZE hex default 0x40000 @@ -162,6 +163,10 @@ help This option allows you to select MMIO Base Address of sideband bus. +config SERIAL_CPU_INIT + bool + default n + config SERIRQ_CONTINUOUS_MODE bool default n @@ -181,12 +186,31 @@ string default "8086,0406" +config UART_DEBUG + bool "Enable UART debug port." + default y + select CONSOLE_SERIAL + select DRIVERS_UART_8250MEM_32 + select NO_UART_ON_SUPERIO + +config UART_FOR_CONSOLE + int "Index for LPSS UART port to use for console" + default 2 if DRIVERS_UART_8250MEM + default 0 + help + Index for LPSS UART port to use for console: + 0 = LPSS UART0, 1 = LPSS UART1, 2 = LPSS UART2 + config SKYLAKE_SOC_PCH_H bool default n help Choose this option if you have a PCH-H chipset. +config CHIPSET_BOOTBLOCK_INCLUDE + string + default "soc/intel/skylake/bootblock/timestamp.inc" + config NHLT_DMIC_2CH bool default n @@ -247,19 +271,37 @@ help Include DSP firmware settings for DA7219 headset codec. -config FSP_HEADER_PATH - string "Location of FSP headers" - depends on MAINBOARD_USES_FSP2_0 - # Use KabylakeFsp for both Skylake and Kabylake as it supports both. - # SkylakeFsp is FSP 1.1 and therefore incompatible. - default "3rdparty/fsp/KabylakeFspBinPkg/Include/" if SOC_INTEL_SKYLAKE - default "3rdparty/fsp/KabylakeFspBinPkg/Include/" if SOC_INTEL_KABYLAKE +choice + prompt "Cache-as-ram implementation" + default USE_SKYLAKE_CAR_NEM_ENHANCED + help + This option allows you to select how cache-as-ram (CAR) is set up. -config FSP_FD_PATH - string - depends on FSP_USE_REPO - default "3rdparty/fsp/KabylakeFspBinPkg/Fsp.fd" if SOC_INTEL_SKYLAKE - default "3rdparty/fsp/KabylakeFspBinPkg/Fsp.fd" if SOC_INTEL_KABYLAKE +config USE_SKYLAKE_CAR_NEM_ENHANCED + bool "Enhanced Non-evict mode" + select SOC_INTEL_COMMON_BLOCK_CAR + select INTEL_CAR_NEM_ENHANCED + help + A current limitation of NEM (Non-Evict mode) is that code and data + sizes are derived from the requirement to not write out any modified + cache line. With NEM, if there is no physical memory behind the + cached area, the modified data will be lost and NEM results will be + inconsistent. ENHANCED NEM guarantees that modified data is always + kept in cache while clean data is replaced. + +config USE_SKYLAKE_FSP_CAR + bool "Use FSP CAR" + select FSP_CAR + help + Use FSP APIs to initialize and tear down the Cache-As-Ram. + +endchoice + +config SKIP_FSP_CAR + bool "Skip cache as RAM setup in FSP" + default y + help + Skip Cache as RAM setup in FSP. config SPI_FLASH_INCLUDE_ALL_DRIVERS bool diff --git a/src/soc/intel/skylake/Makefile.inc b/src/soc/intel/skylake/Makefile.inc index ee2c928..c5451e6 100644 --- a/src/soc/intel/skylake/Makefile.inc +++ b/src/soc/intel/skylake/Makefile.inc @@ -2,7 +2,6 @@ subdirs-y += nhlt subdirs-y += romstage -subdirs-y += ../../../cpu/intel/common subdirs-y += ../../../cpu/intel/microcode subdirs-y += ../../../cpu/intel/turbo subdirs-y += ../../../cpu/x86/lapic @@ -11,7 +10,6 @@ subdirs-y += ../../../cpu/x86/tsc bootblock-y += bootblock/bootblock.c -bootblock-$(CONFIG_FSP_CAR) += fspcar.c bootblock-y += bootblock/cpu.c bootblock-y += i2c.c bootblock-y += bootblock/pch.c @@ -22,13 +20,13 @@ bootblock-y += pmutil.c bootblock-y += spi.c bootblock-y += lpc.c -bootblock-y += uart.c +bootblock-$(CONFIG_UART_DEBUG) += uart.c verstage-y += gspi.c verstage-y += pmutil.c verstage-y += i2c.c verstage-y += spi.c -verstage-y += uart.c +verstage-$(CONFIG_UART_DEBUG) += uart.c romstage-y += gpio.c romstage-y += gspi.c @@ -40,7 +38,7 @@ romstage-y += pmutil.c romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c romstage-y += spi.c -romstage-y += uart.c +romstage-$(CONFIG_UART_DEBUG) += uart.c ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c ramstage-$(CONFIG_PLATFORM_USES_FSP1_1) += chip.c @@ -67,33 +65,22 @@ ramstage-y += spi.c ramstage-y += systemagent.c ramstage-y += thermal.c -ramstage-y += uart.c -ramstage-y += vr_config.c +ramstage-$(CONFIG_UART_DEBUG) += uart.c +//ramstage-y += vr_config.c smm-y += elog.c smm-y += gpio.c smm-y += p2sb.c smm-y += pmutil.c smm-y += smihandler.c -smm-y += uart.c +smm-$(CONFIG_UART_DEBUG) += uart.c postcar-y += memmap.c postcar-y += gspi.c postcar-y += spi.c -postcar-y += i2c.c -postcar-y += uart.c +postcar-$(CONFIG_UART_DEBUG) += uart.c - -# Skylake D0 -cpu_microcode_bins += 3rdparty/blobs/cpu/intel/model_406ex/microcode.bin -# Skylake H Q0 -cpu_microcode_bins += 3rdparty/blobs/cpu/intel/model_506ex/microcode.bin -# Kabylake H0, Y0 -cpu_microcode_bins += 3rdparty/blobs/cpu/intel/model_806ex/microcode.bin -# Kabylake HB0 -cpu_microcode_bins += 3rdparty/blobs/cpu/intel/model_906ex/microcode.bin -# Missing for Skylake C0 (0x406e2), Kabylake G0 (0x406e8), Kabylake HA0 (0x506e8) -# since those are probably pre-release samples. +# cpu_microcode_bins += ??? CPPFLAGS_common += -I$(src)/soc/intel/skylake CPPFLAGS_common += -I$(src)/soc/intel/skylake/include @@ -103,6 +90,7 @@ CPPFLAGS_common += -I$(src)/vendorcode/intel/fsp/fsp1_1/skylake else CPPFLAGS_common += -I$(src)/soc/intel/skylake/include/fsp20 +CPPFLAGS_common += -I$(src)/vendorcode/intel/fsp/fsp2_0/skykabylake endif # Currently used for microcode path. diff --git a/src/soc/intel/skylake/chip_fsp20.c b/src/soc/intel/skylake/chip_fsp20.c index 3ade8d7..020dea3 100644 --- a/src/soc/intel/skylake/chip_fsp20.c +++ b/src/soc/intel/skylake/chip_fsp20.c @@ -20,12 +20,16 @@ #include <fsp/api.h> #include <arch/acpi.h> #include <arch/io.h> +#include <chip.h> +#include <compiler.h> +#include <bootstate.h> #include <console/console.h> #include <device/device.h> +#include <device/pci.h> #include <device/pci_ids.h> +#include <fsp/api.h> #include <fsp/util.h> #include <intelblocks/chip.h> -#include <intelblocks/itss.h> #include <intelblocks/xdci.h> #include <intelpch/lockdown.h> #include <romstage_handoff.h> @@ -34,7 +38,6 @@ #include <soc/interrupt.h> #include <soc/iomap.h> #include <soc/irq.h> -#include <soc/itss.h> #include <soc/pci_devs.h> #include <soc/ramstage.h> #include <soc/systemagent.h> @@ -165,16 +168,8 @@ void soc_init_pre_device(void *chip_info) { - /* Snapshot the current GPIO IRQ polarities. FSP is setting a - * default policy that doesn't honor boards' requirements. */ - itss_snapshot_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END); - /* Perform silicon specific init. */ fsp_silicon_init(romstage_handoff_is_resume()); - - /* Restore GPIO IRQ polarities back to previous settings. */ - itss_restore_irq_polarities(GPIO_IRQ_START, GPIO_IRQ_END); - /* swap enabled PCI ports in device tree if needed */ pcie_override_devicetree_after_silicon_init(); } @@ -227,8 +222,9 @@ /* UPD parameters to be initialized before SiliconInit */ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd) { - FSP_S_CONFIG *params = &supd->FspsConfig; - FSP_S_TEST_CONFIG *tconfig = &supd->FspsTestConfig; + FSPS_CONFIG *params = &supd->FspsConfig; +#if 0 +// FSP_S_TEST_CONFIG *tconfig = &supd->FspsTestConfig; static struct soc_intel_skylake_config *config; uintptr_t vbt_data = (uintptr_t)vbt_get(); int i; @@ -244,14 +240,14 @@ /* Set PsysPmax if it is available from DT */ if (config->psys_pmax) { /* PsysPmax is in unit of 1/8 Watt */ - tconfig->PsysPmax = config->psys_pmax * 8; - printk(BIOS_DEBUG, "psys_pmax = %d\n", tconfig->PsysPmax); +// tconfig->PsysPmax = config->psys_pmax * 8; +// printk(BIOS_DEBUG, "psys_pmax = %d\n", tconfig->PsysPmax); } - params->GraphicsConfigPtr = (u32) vbt_data; +// params->GraphicsConfigPtr = (u32) vbt_data; for (i = 0; i < ARRAY_SIZE(config->usb2_ports); i++) { - params->PortUsb20Enable[i] = +/* params->PortUsb20Enable[i] = config->usb2_ports[i].enable; params->Usb2OverCurrentPin[i] = config->usb2_ports[i].ocpin; @@ -295,6 +291,7 @@ sizeof(params->PcieRpLtrEnable)); memcpy(params->PcieRpHotPlug, config->PcieRpHotPlug, sizeof(params->PcieRpHotPlug)); +*/ /* * PcieRpClkSrcNumber UPD is set to clock source number(0-6) for @@ -341,15 +338,6 @@ params->ScsEmmcHs400Enabled = config->ScsEmmcHs400Enabled; params->ScsSdCardEnabled = config->ScsSdCardEnabled; - if (!!params->ScsEmmcHs400Enabled && !!config->EmmcHs400DllNeed) { - params->PchScsEmmcHs400DllDataValid = - !!config->EmmcHs400DllNeed; - params->PchScsEmmcHs400RxStrobeDll1 = - config->ScsEmmcHs400RxStrobeDll1; - params->PchScsEmmcHs400TxDataDll = - config->ScsEmmcHs400TxDataDll; - } - /* If ISH is enabled, enable ISH elements */ dev = dev_find_slot(0, PCH_DEVFN_ISH); if (dev) @@ -365,20 +353,18 @@ params->SataMode = config->SataMode; params->SataSpeedLimit = config->SataSpeedLimit; params->SataPwrOptEnable = config->SataPwrOptEnable; - params->EnableTcoTimer = !config->PmTimerDisabled; - tconfig->PchLockDownGlobalSmi = config->LockDownConfigGlobalSmi; - tconfig->PchLockDownRtcLock = config->LockDownConfigRtcLock; - tconfig->PowerLimit4 = config->PowerLimit4; +// tconfig->PchLockDownGlobalSmi = config->LockDownConfigGlobalSmi; +// tconfig->PchLockDownRtcLock = config->LockDownConfigRtcLock; /* * To disable HECI, the Psf needs to be left unlocked * by FSP till end of post sequence. Based on the devicetree * setting, we set the appropriate PsfUnlock policy in FSP, * do the changes and then lock it back in coreboot during finalize. */ - tconfig->PchSbAccessUnlock = (config->HeciEnabled == 0) ? 1 : 0; +// tconfig->PchSbAccessUnlock = (config->HeciEnabled == 0) ? 1 : 0; if (get_lockdown_config() == CHIPSET_LOCKDOWN_COREBOOT) { - tconfig->PchLockDownBiosInterface = 0; +// tconfig->PchLockDownBiosInterface = 0; params->PchLockDownBiosLock = 0; params->PchLockDownSpiEiss = 0; /* @@ -390,17 +376,8 @@ */ params->SpiFlashCfgLockDown = 0; } - /* only replacing preexisting subsys ID defaults when non-zero */ - if (CONFIG_SUBSYSTEM_VENDOR_ID != 0) { - params->DefaultSvid = CONFIG_SUBSYSTEM_VENDOR_ID; - params->PchSubSystemVendorId = CONFIG_SUBSYSTEM_VENDOR_ID; - } - - if (CONFIG_SUBSYSTEM_DEVICE_ID != 0) { - params->DefaultSid = CONFIG_SUBSYSTEM_DEVICE_ID; - params->PchSubSystemId = CONFIG_SUBSYSTEM_DEVICE_ID; - } - + params->PchSubSystemVendorId = config->PchConfigSubSystemVendorId; + params->PchSubSystemId = config->PchConfigSubSystemId; params->PchPmWolEnableOverride = config->WakeConfigWolEnableOverride; params->PchPmPcieWakeFromDeepSx = config->WakeConfigPcieWakeFromDeepSx; params->PchPmDeepSxPol = config->PmConfigDeepSxPol; @@ -467,13 +444,13 @@ params->FastPkgCRampDisableSa = config->FastPkgCRampDisableSa; /* Enable PMC XRAM read */ - tconfig->PchPmPmcReadDisable = config->PchPmPmcReadDisable; +// tconfig->PchPmPmcReadDisable = config->PchPmPmcReadDisable; /* Enable/Disable EIST */ - tconfig->Eist = config->eist_enable; +// tconfig->Eist = config->eist_enable; /* Set TccActivationOffset */ - tconfig->TccActivationOffset = config->tcc_offset; +// tconfig->TccActivationOffset = config->tcc_offset; /* Enable VT-d and X2APIC */ if (!config->ignore_vtd && soc_is_vtd_capable()) { @@ -487,12 +464,13 @@ params->PchIoApicDeviceNumber = 31; params->PchIoApicFunctionNumber = 0; } +#endif soc_irq_settings(params); } /* Mainboard GPIO Configuration */ -__weak void mainboard_silicon_init_params(FSP_S_CONFIG *params) +__weak void mainboard_silicon_init_params(FSPS_CONFIG *params) { printk(BIOS_DEBUG, "WEAK: %s/%s called\n", __FILE__, __func__); } diff --git a/src/soc/intel/skylake/include/fsp20/soc/ramstage.h b/src/soc/intel/skylake/include/fsp20/soc/ramstage.h index e75b350..820e517 100644 --- a/src/soc/intel/skylake/include/fsp20/soc/ramstage.h +++ b/src/soc/intel/skylake/include/fsp20/soc/ramstage.h @@ -22,10 +22,10 @@ #include <fsp/api.h> #include <fsp/util.h> -#define FSP_SIL_UPD FSP_S_CONFIG -#define FSP_MEM_UPD FSP_M_CONFIG +#define FSP_SIL_UPD FSPS_CONFIG +#define FSP_MEM_UPD FSPM_CONFIG -void mainboard_silicon_init_params(FSP_S_CONFIG *params); +void mainboard_silicon_init_params(FSPS_CONFIG *params); void soc_fsp_load(void); void soc_init_pre_device(void *chip_info); void soc_irq_settings(FSP_SIL_UPD *params); diff --git a/src/soc/intel/skylake/irq.c b/src/soc/intel/skylake/irq.c index 7b3e1bd..d26bd84 100644 --- a/src/soc/intel/skylake/irq.c +++ b/src/soc/intel/skylake/irq.c @@ -22,6 +22,7 @@ #include <soc/irq.h> #include <string.h> +#if 0 static const SI_PCH_DEVICE_INTERRUPT_CONFIG devintconfig[] = { /* * cAVS(Audio, Voice, Speech), INTA is default, programmed in @@ -216,23 +217,26 @@ DEVICE_INT_CONFIG(PCH_DEV_SLOT_ISH, PCI_FUNC(PCH_DEVFN_ISH), int_A, ISH_IRQ) }; +#endif void soc_irq_settings(FSP_SIL_UPD *params) { - uint32_t i, intdeventry; + uint32_t i; +// uint32_t i, intdeventry; u8 irq_config[PCH_MAX_IRQ_CONFIG]; - const struct device *dev = dev_find_slot(0, PCH_DEVFN_LPC); - const struct soc_intel_skylake_config *config = dev->chip_info; +// const struct device *dev = dev_find_slot(0, PCH_DEVFN_LPC); +// const struct soc_intel_skylake_config *config = dev->chip_info; /* Get Device Int Count */ - intdeventry = ARRAY_SIZE(devintconfig); +// intdeventry = ARRAY_SIZE(devintconfig); /* update irq table */ - memcpy((SI_PCH_DEVICE_INTERRUPT_CONFIG *) +/* memcpy((SI_PCH_DEVICE_INTERRUPT_CONFIG *) (params->DevIntConfigPtr), devintconfig, intdeventry * sizeof(SI_PCH_DEVICE_INTERRUPT_CONFIG)); params->NumOfDevIntConfig = intdeventry; +*/ /* PxRC to IRQ programming */ for (i = 0; i < PCH_MAX_IRQ_CONFIG; i++) { switch (i) { @@ -250,13 +254,15 @@ break; } } - memcpy(params->PxRcConfig, irq_config, PCH_MAX_IRQ_CONFIG); +// memcpy(params->PxRcConfig, irq_config, PCH_MAX_IRQ_CONFIG); /* GPIO IRQ Route The valid values is 14 or 15 */ - if (config->GpioIrqSelect == 0) +/* if (config->GpioIrqSelect == 0) params->GpioIrqRoute = GPIO_IRQ14; else params->GpioIrqRoute = config->GpioIrqSelect; +*/ /* SCI IRQ Select The valid values is 9, 10, 11 and 20 21, 22, 23 */ +#if 0 if (config->SciIrqSelect == 0) params->SciIrqSelect = SCI_IRQ9; else @@ -268,6 +274,7 @@ params->TcoIrqSelect = config->TcoIrqSelect; /* TCO Irq enable/disable */ params->TcoIrqEnable = config->TcoIrqEnable; +#endif } /* diff --git a/src/soc/intel/skylake/romstage/romstage_fsp20.c b/src/soc/intel/skylake/romstage/romstage_fsp20.c index 2a60158..48f3429 100644 --- a/src/soc/intel/skylake/romstage/romstage_fsp20.c +++ b/src/soc/intel/skylake/romstage/romstage_fsp20.c @@ -18,6 +18,7 @@ #include <arch/io.h> #include <arch/symbols.h> #include <assert.h> +#include <compiler.h> #include <cpu/x86/mtrr.h> #include <cpu/x86/msr.h> #include <cbmem.h> @@ -37,6 +38,7 @@ #include <string.h> #include <timestamp.h> #include <security/vboot/vboot_common.h> +#include <MemInfoHob.h> #define FSP_SMBIOS_MEMORY_INFO_GUID \ { \ @@ -101,18 +103,18 @@ if (src_dimm->Status != DIMM_PRESENT) continue; - switch (memory_info_hob->MemoryType) { + switch(memory_info_hob->MemoryType) { case MRC_DDR_TYPE_DDR4: - ddr_type = MEMORY_TYPE_DDR4; + ddr_type = MEMORY_DEVICE_DDR4; break; case MRC_DDR_TYPE_DDR3: - ddr_type = MEMORY_TYPE_DDR3; + ddr_type = MEMORY_DEVICE_DDR3; break; case MRC_DDR_TYPE_LPDDR3: - ddr_type = MEMORY_TYPE_LPDDR3; + ddr_type = MEMORY_DEVICE_LPDDR3; break; default: - ddr_type = MEMORY_TYPE_UNKNOWN; + ddr_type = MEMORY_DEVICE_UNKNOWN; break; } @@ -190,19 +192,19 @@ run_postcar_phase(&pcf); } -static void cpu_flex_override(FSP_M_CONFIG *m_cfg) +static void cpu_flex_override(FSPM_CONFIG *m_cfg) { msr_t flex_ratio; - m_cfg->CpuRatioOverride = 1; +// m_cfg->CpuRatioOverride = 1; /* * Set cpuratio to that value set in bootblock, This will ensure FSPM * knows the intended flex ratio. */ flex_ratio = rdmsr(MSR_FLEX_RATIO); - m_cfg->CpuRatio = (flex_ratio.lo >> 8) & 0xff; +// m_cfg->CpuRatio = (flex_ratio.lo >> 8) & 0xff; } -static void soc_memory_init_params(FSP_M_CONFIG *m_cfg, +static void soc_memory_init_params(FSPM_CONFIG *m_cfg, const struct soc_intel_skylake_config *config) { int i; @@ -215,31 +217,30 @@ * With the default stolen size of 32MB(-8MB) there is not enough space * for FBC to work with a high resolution panel. */ - m_cfg->IgdDvmt50PreAlloc = 2; - m_cfg->MmioSize = 0x800; /* 2GB in MB */ - m_cfg->TsegSize = CONFIG_SMM_TSEG_SIZE; - m_cfg->IedSize = CONFIG_IED_REGION_SIZE; - m_cfg->ProbelessTrace = config->ProbelessTrace; - m_cfg->SaGv = config->SaGv; - m_cfg->UserBd = BOARD_TYPE_ULT_ULX; - m_cfg->RMT = config->Rmt; - m_cfg->CmdTriStateDis = config->CmdTriStateDis; - m_cfg->DdrFreqLimit = config->DdrFreqLimit; - m_cfg->VmxEnable = config->VmxEnable; - m_cfg->PrmrrSize = config->PrmrrSize; +// m_cfg->IgdDvmt50PreAlloc = 2; +// m_cfg->MmioSize = 0x800; /* 2GB in MB */ +// m_cfg->TsegSize = CONFIG_SMM_TSEG_SIZE; +// m_cfg->IedSize = CONFIG_IED_REGION_SIZE; +// m_cfg->ProbelessTrace = config->ProbelessTrace; +// m_cfg->SaGv = config->SaGv; +// m_cfg->UserBd = BOARD_TYPE_ULT_ULX; +// m_cfg->RMT = config->Rmt; +// m_cfg->DdrFreqLimit = config->DdrFreqLimit; +// m_cfg->VmxEnable = config->VmxEnable; +// m_cfg->PrmrrSize = config->PrmrrSize; for (i = 0; i < ARRAY_SIZE(config->PcieRpEnable); i++) { if (config->PcieRpEnable[i]) mask |= (1<<i); } - m_cfg->PcieRpEnableMask = mask; +// m_cfg->PcieRpEnableMask = mask; cpu_flex_override(m_cfg); if (!config->ignore_vtd) { - m_cfg->PchHpetBdfValid = 1; - m_cfg->PchHpetBusNumber = 250; - m_cfg->PchHpetDeviceNumber = 15; - m_cfg->PchHpetFunctionNumber = 0; +// m_cfg->PchHpetBdfValid = 1; +// m_cfg->PchHpetBusNumber = 250; +// m_cfg->PchHpetDeviceNumber = 15; +// m_cfg->PchHpetFunctionNumber = 0; } } @@ -247,8 +248,8 @@ { const struct device *dev; const struct soc_intel_skylake_config *config; - FSP_M_CONFIG *m_cfg = &mupd->FspmConfig; - FSP_M_TEST_CONFIG *m_t_cfg = &mupd->FspmTestConfig; + FSPM_CONFIG *m_cfg = &mupd->FspmConfig; +// FSPM_TEST_CONFIG *m_t_cfg = &mupd->FspmTestConfig; dev = dev_find_slot(0, PCI_DEVFN(PCH_DEV_SLOT_LPC, 0)); config = dev->chip_info; @@ -256,43 +257,43 @@ soc_memory_init_params(m_cfg, config); /* Skip creating Management Engine MBP HOB */ - m_t_cfg->SkipMbpHob = 0x01; +// m_t_cfg->SkipMbpHob = 0x01; /* Enable DMI Virtual Channel for ME */ - m_t_cfg->DmiVcm = 0x01; +// m_t_cfg->DmiVcm = 0x01; /* Enable Sending DID to ME */ - m_t_cfg->SendDidMsg = 0x01; - m_t_cfg->DidInitStat = 0x01; +// m_t_cfg->SendDidMsg = 0x01; +// m_t_cfg->DidInitStat = 0x01; /* DCI and TraceHub configs */ - m_t_cfg->PchDciEn = config->PchDciEn; - m_cfg->EnableTraceHub = config->EnableTraceHub; - m_cfg->TraceHubMemReg0Size = config->TraceHubMemReg0Size; - m_cfg->TraceHubMemReg1Size = config->TraceHubMemReg1Size; +// m_t_cfg->PchDciEn = config->PchDciEn; +// m_cfg->EnableTraceHub = config->EnableTraceHub; +// m_cfg->TraceHubMemReg0Size = config->TraceHubMemReg0Size; +// m_cfg->TraceHubMemReg1Size = config->TraceHubMemReg1Size; /* Enable SMBus controller based on config */ - m_cfg->SmbusEnable = config->SmbusEnable; +// m_cfg->SmbusEnable = config->SmbusEnable; mainboard_memory_init_params(mupd); } -void soc_update_memory_params_for_mma(FSP_M_CONFIG *memory_cfg, +void soc_update_memory_params_for_mma(FSPM_CONFIG *memory_cfg, struct mma_config_param *mma_cfg) { /* Boot media is memory mapped for Skylake and Kabylake (SPI). */ assert(IS_ENABLED(CONFIG_BOOT_DEVICE_MEMORY_MAPPED)); - memory_cfg->MmaTestContentPtr = - (uintptr_t) rdev_mmap_full(&mma_cfg->test_content); - memory_cfg->MmaTestContentSize = - region_device_sz(&mma_cfg->test_content); - memory_cfg->MmaTestConfigPtr = - (uintptr_t) rdev_mmap_full(&mma_cfg->test_param); - memory_cfg->MmaTestConfigSize = - region_device_sz(&mma_cfg->test_param); - memory_cfg->MrcFastBoot = 0x00; - memory_cfg->SaGv = 0x02; +// memory_cfg->MmaTestContentPtr = +// (uintptr_t) rdev_mmap_full(&mma_cfg->test_content); +// memory_cfg->MmaTestContentSize = +// region_device_sz(&mma_cfg->test_content); +// memory_cfg->MmaTestConfigPtr = +// (uintptr_t) rdev_mmap_full(&mma_cfg->test_param); +// memory_cfg->MmaTestConfigSize = +// region_device_sz(&mma_cfg->test_param); +// memory_cfg->MrcFastBoot = 0x00; +// memory_cfg->SaGv = 0x02; } __weak void mainboard_memory_init_params(FSPM_UPD *mupd) diff --git a/src/soc/intel/skylake/vr_config.c b/src/soc/intel/skylake/vr_config.c index 4508fda..9266330 100644 --- a/src/soc/intel/skylake/vr_config.c +++ b/src/soc/intel/skylake/vr_config.c @@ -56,7 +56,7 @@ * | IccMax(AML-Y) | 4.1A | 28A | 24A | 24A | * +----------------+-------------+---------------+------+-----+ */ - +#if 0 static const struct { uint16_t icc_max[NUM_VR_DOMAINS]; }sku_icc_max_mapping[] = { @@ -167,12 +167,13 @@ .voltage_limit = 1520, }, }; +#endif static uint16_t get_dev_id(struct device *dev) { return pci_read_config16(dev, PCI_DEVICE_ID); } - +#if 0 static int get_kbl_sku(void) { static int sku = -1; @@ -201,7 +202,6 @@ sku = -2; return sku; } - static uint16_t get_sku_icc_max(int domain, uint16_t board_icc_max) { /* If board provided non-zero value, use it. */ @@ -229,7 +229,7 @@ cfg = chip_cfg; else cfg = &default_configs[domain]; - +/* vr_params->VrConfigEnable[domain] = cfg->vr_config_enable; vr_params->Psi1Threshold[domain] = cfg->psi1threshold; vr_params->Psi2Threshold[domain] = cfg->psi2threshold; @@ -240,9 +240,10 @@ vr_params->ImonOffset[domain] = cfg->imon_offset; vr_params->IccMax[domain] = get_sku_icc_max(domain, cfg->icc_max); vr_params->VrVoltageLimit[domain] = cfg->voltage_limit; - +*/ #if IS_ENABLED(CONFIG_PLATFORM_USES_FSP2_0) - vr_params->AcLoadline[domain] = cfg->ac_loadline; - vr_params->DcLoadline[domain] = cfg->dc_loadline; +// vr_params->AcLoadline[domain] = cfg->ac_loadline; +// vr_params->DcLoadline[domain] = cfg->dc_loadline; #endif } +#endif diff --git a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/DebugSupport.h b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/DebugSupport.h index 6983469..af0950f 100644 --- a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/DebugSupport.h +++ b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/DebugSupport.h @@ -605,7 +605,7 @@ UINT64 ELR; // Exception Link Register UINT64 SPSR; // Saved Processor Status Register UINT64 FPSR; // Floating Point Status Register - UINT64 ESR; // Exception syndrome register +// UINT64 ESR; // Exception syndrome register UINT64 FAR; // Fault Address Register } EFI_SYSTEM_CONTEXT_AARCH64; diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FirmwareVersionInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FirmwareVersionInfoHob.h new file mode 100644 index 0000000..fca01e9 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FirmwareVersionInfoHob.h @@ -0,0 +1,67 @@ +/** @file + Header file for Firmware Version Information + + Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR> + + This program and the accompanying materials are licensed and made available under + the terms and conditions of the BSD License which accompanies this distribution. + The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef _FIRMWARE_VERSION_INFO_HOB_H_ +#define _FIRMWARE_VERSION_INFO_HOB_H_ + +#include <Uefi/UefiMultiPhase.h> +#include <Pi/PiBootMode.h> +#include <Pi/PiHob.h> + +#pragma pack(1) +/// +/// Firmware Version Structure +/// +typedef struct { + UINT8 MajorVersion; + UINT8 MinorVersion; + UINT8 Revision; + UINT16 BuildNumber; +} FIRMWARE_VERSION; + +/// +/// Firmware Version Information Structure +/// +typedef struct { + UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name + UINT8 VersionStringIndex; ///< Offset 1 Index of Version String + FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version +} FIRMWARE_VERSION_INFO; + +#ifndef __SMBIOS_STANDARD_H__ +/// +/// The Smbios structure header. +/// +typedef struct { + UINT8 Type; + UINT8 Length; + UINT16 Handle; +} SMBIOS_STRUCTURE; +#endif + +/// +/// Firmware Version Information HOB Structure +/// +typedef struct { + EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB + SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB + UINT8 Count; ///< Offset 28 Number of FVI elements included. +/// +/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer +/// +} FIRMWARE_VERSION_INFO_HOB; +#pragma pack() + +#endif // _FIRMWARE_VERSION_INFO_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspUpd.h new file mode 100644 index 0000000..cf543fe --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspUpd.h @@ -0,0 +1,48 @@ +/** @file + +Copyright (c) 2018, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include <FspEas.h> + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F445055434F53 /* 'SOCUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F445055434F53 /* 'SOCUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F445055434F53 /* 'SOCUPD_S' */ + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h new file mode 100644 index 0000000..a66b3306 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h @@ -0,0 +1,248 @@ +/** @file + +Copyright (c) 2018, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/** FSP-M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Tseg Size + Size of SMRAM memory reserved. + 2:2 MB, 4:4 MB, 8:8 MB, 16:16 MB +**/ + UINT8 PcdSmmTsegSize; + +/** Offset 0x0041 - FSP Debug Print Level + Select the FSP debug message print level. + 0:NO DEBUG, 1:MIN DEBUG, 2:MED DEBUG, 3:VERBOSE DEBUG +**/ + UINT8 PcdFspDebugPrintErrorLevel; + +/** Offset 0x0042 - Channel 0 DIMM 0 SPD SMBus Address + SPD SMBus Address of each DIMM slot. +**/ + UINT8 PcdSpdSmbusAddress_0_0; + +/** Offset 0x0043 - Channel 0 DIMM 1 SPD SMBus Address + SPD SMBus Address of each DIMM slot. +**/ + UINT8 PcdSpdSmbusAddress_0_1; + +/** Offset 0x0044 - Channel 1 DIMM 0 SPD SMBus Address + SPD SMBus Address of each DIMM slot. +**/ + UINT8 PcdSpdSmbusAddress_1_0; + +/** Offset 0x0045 - Channel 1 DIMM 1 SPD SMBus Address + SPD SMBus Address of each DIMM slot. +**/ + UINT8 PcdSpdSmbusAddress_1_1; + +/** Offset 0x0046 - Enable Rank Margin Tool + Enable/disable Rank Margin Tool. + $EN_DIS +**/ + UINT8 PcdMrcRmtSupport; + +/** Offset 0x0047 - RMT CPGC exp_loop_cnt + Set the CPGC exp_loop_cnt field for RMT execution 2^(exp_loop_cnt -1). + 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT8 PcdMrcRmtCpgcExpLoopCntValue; + +/** Offset 0x0048 - RMT CPGC num_bursts + Set the CPGC num_bursts field for RMT execution 2^(num_bursts -1). + 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT8 PcdMrcRmtCpgcNumBursts; + +/** Offset 0x0049 - Preserve Memory Across Reset + Enable/disable memory preservation across reset. + $EN_DIS +**/ + UINT8 PcdMemoryPreservation; + +/** Offset 0x004A - Fast Boot + Enable/disable Fast Boot function. Once enabled, all following boots will use the + presaved MRC data to improve the boot performance. + $EN_DIS +**/ + UINT8 PcdFastBoot; + +/** Offset 0x004B - ECC Support + Enable/disable ECC Support. + $EN_DIS +**/ + UINT8 PcdEccSupport; + +/** Offset 0x004C - HSUART Device + Select the PCI High Speed UART Device for Serial Port. + 0:HSUART0, 1:HSUART1, 2:HSUART2 +**/ + UINT8 PcdHsuartDevice; + +/** Offset 0x004D - Memory Down + Enable/disable Memory Down function. + $EN_DIS +**/ + UINT8 PcdMemoryDown; + +/** Offset 0x004E +**/ + UINT32 PcdMemoryDownConfigPtr; + +/** Offset 0x0052 - SATA Controller 0 + Enable/disable SATA Controller 0. + $EN_DIS +**/ + UINT8 PcdEnableSATA0; + +/** Offset 0x0053 - SATA Controller 1 + Enable/disable SATA Controller 1. + $EN_DIS +**/ + UINT8 PcdEnableSATA1; + +/** Offset 0x0054 - Intel Quick Assist Technology + Enable/disable Intel Quick Assist Technology. + $EN_DIS +**/ + UINT8 PcdEnableIQAT; + +/** Offset 0x0055 - SPD Write Disable + Select SMBus SPD Write Enable State (Default: 0 = [FORCE_ENABLE], 1 = [FORCE_DISABLE]) + 0:Force Enable, 1:Force Disable +**/ + UINT8 PcdSmbusSpdWriteDisable; + +/** Offset 0x0056 - ME_SHUTDOWN Message + Enable/Disable sending ME_SHUTDOWN message to ME, refer to FSP Integration Guide + for details. + $EN_DIS +**/ + UINT8 PcdEnableMeShutdown; + +/** Offset 0x0057 - XHCI Controller + Enable / Disable XHCI controller + $EN_DIS +**/ + UINT8 PcdEnableXhci; + +/** Offset 0x0058 - Memory Frequency + Set DDR Memory Frequency, refer to FSP Integration Guide for details.. + 15:Auto, 3:1600, 4:1866, 5:2133, 6:2400 +**/ + UINT8 PcdDdrFreq; + +/** Offset 0x0059 - MMIO Size + Set memory mapped IO space size + 0:2048M, 1:1024M, 2:3072M +**/ + UINT8 PcdMmioSize; + +/** Offset 0x005A +**/ + UINT8 UnusedUpdSpace0[6]; + +/** Offset 0x0060 - Customer Revision + The Customer can set this revision string for their own purpose. +**/ + UINT8 PcdCustomerRevision[32]; + +/** Offset 0x0080 - 32-Bit bus mode + Enable/Disable 32-Bit bus memory mode. + $EN_DIS +**/ + UINT8 PcdHalfWidthEnable; + +/** Offset 0x0081 - TCL Performance + Enable/Disable Tcl timing for performance. + $EN_DIS +**/ + UINT8 PcdTclIdle; + +/** Offset 0x0082 - Interleave Mode + Select Interleave Mode + 0:DISABLED, 1:MODE0, 2:MODE1, 3:MODE2 +**/ + UINT8 PcdInterleaveMode; + +/** Offset 0x0083 - Memory Thermal Throttling + Enable/disable Memory Thermal Throttling management mode + $EN_DIS +**/ + UINT8 PcdMemoryThermalThrottling; + +/** Offset 0x0084 +**/ + UINT8 UnusedUpdSpace1[348]; + +/** Offset 0x01E0 +**/ + UINT8 ReservedMemoryInitUpd[16]; +} FSPM_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPM_ARCH_UPD FspmArchUpd; + +/** Offset 0x0040 +**/ + FSPM_CONFIG FspmConfig; + +/** Offset 0x01F0 +**/ + UINT8 UnusedUpdSpace2[14]; + +/** Offset 0x01FE +**/ + UINT16 UpdTerminator; +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h new file mode 100644 index 0000000..5d0b793 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h @@ -0,0 +1,192 @@ +/** @file + +Copyright (c) 2018, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/** FSP-S Configuration +**/ +typedef struct { + +/** Offset 0x0020 - PCIe Controller 0 Bifurcation + Configure PCI Express controller 0 bifurcation. + 0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8 +**/ + UINT8 PcdBifurcationPcie0; + +/** Offset 0x0021 - PCIe Controller 1 Bifurcation + Configure PCI Express controller 1 bifurcation. + 0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8 +**/ + UINT8 PcdBifurcationPcie1; + +/** Offset 0x0022 - Active Core Count + Select # of Active Cores (Default: 0, 0:ALL, 1..15 = 1..15 Cores) + 0:ALL, 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, + 14:14, 15:15 +**/ + UINT8 PcdActiveCoreCount; + +/** Offset 0x0023 +**/ + UINT32 PcdCpuMicrocodePatchBase; + +/** Offset 0x0027 +**/ + UINT32 PcdCpuMicrocodePatchSize; + +/** Offset 0x002B - PCIe Controller 0 + Enable / Disable PCI Express controller 0 + $EN_DIS +**/ + UINT8 PcdEnablePcie0; + +/** Offset 0x002C - PCIe Controller 1 + Enable / Disable PCI Express controller 1 + $EN_DIS +**/ + UINT8 PcdEnablePcie1; + +/** Offset 0x002D - Embedded Multi-Media Controller (eMMC) + Enable / Disable Embedded Multi-Media controller + $EN_DIS +**/ + UINT8 PcdEnableEmmc; + +/** Offset 0x002E - LAN Controllers + Enable / Disable LAN controllers, refer to FSP Integration Guide for details. + 0:Disable LAN 0 & LAN 1, 1:Enable LAN 0 & LAN 1, 2:Disable LAN 1 only +**/ + UINT8 PcdEnableGbE; + +/** Offset 0x002F +**/ + UINT32 PcdFiaMuxConfigRequestPtr; + +/** Offset 0x0033 +**/ + UINT8 UnusedUpdSpace0[4]; + +/** Offset 0x0037 - PCIe Root Port 0 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB +**/ + UINT8 PcdPcieRootPort0DeEmphasis; + +/** Offset 0x0038 - PCIe Root Port 1 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB +**/ + UINT8 PcdPcieRootPort1DeEmphasis; + +/** Offset 0x0039 - PCIe Root Port 2 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB +**/ + UINT8 PcdPcieRootPort2DeEmphasis; + +/** Offset 0x003A - PCIe Root Port 3 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB +**/ + UINT8 PcdPcieRootPort3DeEmphasis; + +/** Offset 0x003B - PCIe Root Port 4 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB +**/ + UINT8 PcdPcieRootPort4DeEmphasis; + +/** Offset 0x003C - PCIe Root Port 5 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB +**/ + UINT8 PcdPcieRootPort5DeEmphasis; + +/** Offset 0x003D - PCIe Root Port 6 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB +**/ + UINT8 PcdPcieRootPort6DeEmphasis; + +/** Offset 0x003E - PCIe Root Port 7 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB +**/ + UINT8 PcdPcieRootPort7DeEmphasis; + +/** Offset 0x003F +**/ + UINT8 UnusedUpdSpace1; + +/** Offset 0x0040 +**/ + UINT32 PcdEMMCDLLConfigPtr; + +/** Offset 0x0044 +**/ + UINT8 UnusedUpdSpace2[156]; + +/** Offset 0x00E0 +**/ + UINT8 ReservedSiliconInitUpd[16]; +} FSPS_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPS_CONFIG FspsConfig; + +/** Offset 0x00F0 +**/ + UINT8 UnusedUpdSpace3[14]; + +/** Offset 0x00FE +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FsptUpd.h new file mode 100644 index 0000000..340f144 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FsptUpd.h @@ -0,0 +1,109 @@ +/** @file + +Copyright (c) 2018, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPTUPD_H__ +#define __FSPTUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/** FSP-T Core UPD +**/ +typedef struct { + +/** Offset 0x0020 +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x0024 +**/ + UINT32 MicrocodeRegionLength; + +/** Offset 0x0028 +**/ + UINT32 CodeRegionBase; + +/** Offset 0x002C +**/ + UINT32 CodeRegionLength; + +/** Offset 0x0030 +**/ + UINT8 Reserved1[16]; +} FSPT_CORE_UPD; + +/** FSP-T Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Disable Port80 output in FSP-T + Select Port80 Control in FSP-T (0:VPD-Style, 1:Enable Port80 Output, 2:Disable Port80 + Output, refer to FSP Integration Guide for details + 0:VPD-Style, 1:Enable Port80 Output[Default], 2:Disable Port80 Output +**/ + UINT8 PcdFsptPort80RouteDisable; + +/** Offset 0x0041 +**/ + UINT8 ReservedTempRamInitUpd[31]; +} FSPT_CONFIG; + +/** Fsp T UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPT_CORE_UPD FsptCoreUpd; + +/** Offset 0x0040 +**/ + FSPT_CONFIG FsptConfig; + +/** Offset 0x0060 +**/ + UINT8 UnusedUpdSpace0[30]; + +/** Offset 0x007E +**/ + UINT16 UpdTerminator; +} FSPT_UPD; + +#pragma pack() + +#endif -- To view, visit https://review.coreboot.org/c/coreboot/+/31205 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I033a52bc3f0b86f0ec1db8325b7435d20d194fda Gerrit-Change-Number: 31205 Gerrit-PatchSet: 1 Gerrit-Owner: Name of user not set #1002246 Gerrit-MessageType: newchange

3 2

Change in ...coreboot[master]: src: Move 'static' is at beginning of declaration
by HAOUAS Elyes (Code Review) 02 Dec '19

02 Dec '19

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33673 Change subject: src: Move 'static' is at beginning of declaration ...................................................................... src: Move 'static' is at beginning of declaration Change-Id: I9b2cc1bb58922d9e32202ea4c20b9aacfe308bad Signed-off-by: Elyes HAOUAS <ehaouas(a)noos.fr> --- M src/mainboard/gizmosphere/gizmo/platform_cfg.h M src/northbridge/intel/x4x/dq_dqs.c M src/northbridge/intel/x4x/raminit_ddr23.c M src/security/vboot/secdata_tpm.c M src/security/vboot/vboot_crtm.c M src/soc/amd/stoneyridge/southbridge.c M src/soc/intel/fsp_broadwell_de/gpio.c 7 files changed, 13 insertions(+), 13 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/73/33673/1 diff --git a/src/mainboard/gizmosphere/gizmo/platform_cfg.h b/src/mainboard/gizmosphere/gizmo/platform_cfg.h index 57b1aec..c56b537 100644 --- a/src/mainboard/gizmosphere/gizmo/platform_cfg.h +++ b/src/mainboard/gizmosphere/gizmo/platform_cfg.h @@ -212,7 +212,7 @@ */ #define GEC_CONFIG 0 -const static CODECENTRY gizmo_codec_alc272[] = +static const CODECENTRY gizmo_codec_alc272[] = { /* NID, PinConfig */ {0x11, 0x411111F0}, /* S/PDIF-OUT2 unused */ diff --git a/src/northbridge/intel/x4x/dq_dqs.c b/src/northbridge/intel/x4x/dq_dqs.c index ed372b5..a1ba310 100644 --- a/src/northbridge/intel/x4x/dq_dqs.c +++ b/src/northbridge/intel/x4x/dq_dqs.c @@ -88,7 +88,7 @@ } } -const static u8 max_tap[3] = {12, 10, 13}; +static const u8 max_tap[3] = {12, 10, 13}; static int increment_dq_dqs(const struct sysinfo *s, struct dll_setting *dq_dqs_setting) @@ -540,7 +540,7 @@ u32 emrs1; /* Is shifted by bits 2 later so u8 can be used to reduce size */ - const static u8 emrs1_lut[8][4][4]={ /* [Config][Leveling Rank][Rank] */ + static const u8 emrs1_lut[8][4][4]={ /* [Config][Leveling Rank][Rank] */ { /* Config 0: 2R2R */ {0x11, 0x00, 0x91, 0x00}, {0x00, 0x11, 0x91, 0x00}, diff --git a/src/northbridge/intel/x4x/raminit_ddr23.c b/src/northbridge/intel/x4x/raminit_ddr23.c index 32618e8..8ca6ec1 100644 --- a/src/northbridge/intel/x4x/raminit_ddr23.c +++ b/src/northbridge/intel/x4x/raminit_ddr23.c @@ -437,7 +437,7 @@ 5200 }; - const static u8 ddr3_turnaround_tab[3][6][4] = { + static const u8 ddr3_turnaround_tab[3][6][4] = { { /* DDR3 800 */ {0x9, 0x7, 0x7, 0x9}, /* CL = 5 */ {0x9, 0x7, 0x8, 0x8}, /* CL = 6 */ @@ -459,7 +459,7 @@ }; /* [DDR freq][0x26F & 1][pagemod] */ - const static u8 ddr2_x252_tab[2][2][2] = { + static const u8 ddr2_x252_tab[2][2][2] = { { /* DDR2 667 */ {12, 16}, {14, 18} @@ -470,7 +470,7 @@ } }; - const static u8 ddr3_x252_tab[3][2][2] = { + static const u8 ddr3_x252_tab[3][2][2] = { { /* DDR3 800 */ {16, 20}, {18, 22} diff --git a/src/security/vboot/secdata_tpm.c b/src/security/vboot/secdata_tpm.c index 39cd614..50da155 100644 --- a/src/security/vboot/secdata_tpm.c +++ b/src/security/vboot/secdata_tpm.c @@ -173,7 +173,7 @@ * i.e. those which should not be possible to delete or modify once * the RO exits, and the rest of the NVRAM spaces. */ -const static TPMA_NV ro_space_attributes = { +static const TPMA_NV ro_space_attributes = { .TPMA_NV_PPWRITE = 1, .TPMA_NV_AUTHREAD = 1, .TPMA_NV_PPREAD = 1, @@ -182,7 +182,7 @@ .TPMA_NV_POLICY_DELETE = 1, }; -const static TPMA_NV rw_space_attributes = { +static const TPMA_NV rw_space_attributes = { .TPMA_NV_PPWRITE = 1, .TPMA_NV_AUTHREAD = 1, .TPMA_NV_PPREAD = 1, @@ -193,7 +193,7 @@ * This policy digest was obtained using TPM2_PolicyPCR * selecting only PCR_0 with a value of all zeros. */ -const static uint8_t pcr0_unchanged_policy[] = { +static const uint8_t pcr0_unchanged_policy[] = { 0x09, 0x93, 0x3C, 0xCE, 0xEB, 0xB4, 0x41, 0x11, 0x18, 0x81, 0x1D, 0xD4, 0x47, 0x78, 0x80, 0x08, 0x88, 0x86, 0x62, 0x2D, 0xD7, 0x79, 0x94, 0x46, 0x62, 0x26, 0x68, 0x8E, 0xEE, 0xE6, 0x6A, 0xA1}; diff --git a/src/security/vboot/vboot_crtm.c b/src/security/vboot/vboot_crtm.c index e4266b2..f68ab0a4 100644 --- a/src/security/vboot/vboot_crtm.c +++ b/src/security/vboot/vboot_crtm.c @@ -29,7 +29,7 @@ { int i; struct region_device fmap; - const static char *fmap_cbfs_names[] = { + static const char *fmap_cbfs_names[] = { "COREBOOT", "FW_MAIN_A", "FW_MAIN_B", diff --git a/src/soc/amd/stoneyridge/southbridge.c b/src/soc/amd/stoneyridge/southbridge.c index 45408ea..e1df91f 100644 --- a/src/soc/amd/stoneyridge/southbridge.c +++ b/src/soc/amd/stoneyridge/southbridge.c @@ -44,7 +44,7 @@ * waiting for each device to become available, a single delay will be * executed. */ -const static struct stoneyridge_aoac aoac_devs[] = { +static const struct stoneyridge_aoac aoac_devs[] = { { (FCH_AOAC_D3_CONTROL_UART0 + CONFIG_UART_FOR_CONSOLE * 2), (FCH_AOAC_D3_STATE_UART0 + CONFIG_UART_FOR_CONSOLE * 2) }, { FCH_AOAC_D3_CONTROL_AMBA, FCH_AOAC_D3_STATE_AMBA }, @@ -116,7 +116,7 @@ * amd_pci_int_defs.h, just add the pair at the end of this table. * Order is not important. */ -const static struct irq_idx_name irq_association[] = { +static const struct irq_idx_name irq_association[] = { { PIRQ_A, "INTA#" }, { PIRQ_B, "INTB#" }, { PIRQ_C, "INTC#" }, diff --git a/src/soc/intel/fsp_broadwell_de/gpio.c b/src/soc/intel/fsp_broadwell_de/gpio.c index 41100e9..01c4d9e 100644 --- a/src/soc/intel/fsp_broadwell_de/gpio.c +++ b/src/soc/intel/fsp_broadwell_de/gpio.c @@ -24,7 +24,7 @@ #include <soc/gpio.h> /* Use a wrapper for register addresses for different banks. */ -const static struct gpio_config_regs regs[GPIO_NUM_BANKS] = { +static const struct gpio_config_regs regs[GPIO_NUM_BANKS] = { [0] = { .use_sel = GPIO_1_USE_SEL, .io_sel = GPIO_1_IO_SEL, .level = GPIO_1_LVL, .nmi_en = GPIO_1_NMI_EN, .blink_en = GPIO_1_BLINK, .invert_input = GPIO_1_INVERT }, -- To view, visit https://review.coreboot.org/c/coreboot/+/33673 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I9b2cc1bb58922d9e32202ea4c20b9aacfe308bad Gerrit-Change-Number: 33673 Gerrit-PatchSet: 1 Gerrit-Owner: HAOUAS Elyes <ehaouas(a)noos.fr> Gerrit-MessageType: newchange

5 12

Change in coreboot[master]: crossgcc: Upgrade acpica to version 20190816
by HAOUAS Elyes (Code Review) 29 Nov '19

29 Nov '19

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34907 ) Change subject: crossgcc: Upgrade acpica to version 20190816 ...................................................................... crossgcc: Upgrade acpica to version 20190816 Changes: https://acpica.org/node/172 Change-Id: I72e44429f96c2ec82092c87aea46c3ff80755d4c Signed-off-by: Elyes HAOUAS <ehaouas(a)noos.fr> --- M util/crossgcc/buildgcc R util/crossgcc/patches/acpica-unix2-20190816_iasl.patch D util/crossgcc/sum/acpica-unix2-20190703.tar.gz.cksum A util/crossgcc/sum/acpica-unix2-20190816.tar.gz.cksum 4 files changed, 5 insertions(+), 5 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/07/34907/1 diff --git a/util/crossgcc/buildgcc b/util/crossgcc/buildgcc index c7f63c3b..0443ddb 100755 --- a/util/crossgcc/buildgcc +++ b/util/crossgcc/buildgcc @@ -54,7 +54,7 @@ GCC_AUTOCONF_VERSION=2.69 BINUTILS_VERSION=2.32 GDB_VERSION=8.3 -IASL_VERSION=20190703 +IASL_VERSION=20190816 PYTHON_VERSION=3.7.4 EXPAT_VERSION=2.2.7 # CLANG version number diff --git a/util/crossgcc/patches/acpica-unix2-20190703_iasl.patch b/util/crossgcc/patches/acpica-unix2-20190816_iasl.patch similarity index 73% rename from util/crossgcc/patches/acpica-unix2-20190703_iasl.patch rename to util/crossgcc/patches/acpica-unix2-20190816_iasl.patch index 0f60974..01c66c7 100644 --- a/util/crossgcc/patches/acpica-unix2-20190703_iasl.patch +++ b/util/crossgcc/patches/acpica-unix2-20190816_iasl.patch @@ -1,6 +1,6 @@ -diff -Naur acpica-unix2-20190703_/source/compiler/asloptions.c acpica-unix2-20190703/source/compiler/asloptions.c > acpica-unix2-20190703_iasl.patch ---- acpica-unix2-20190703_/source/compiler/asloptions.c -+++ acpica-unix2-20190703/source/compiler/asloptions.c +diff -Naur acpica-unix2-20190816_/source/compiler/asloptions.c acpica-unix2-20190816/source/compiler/asloptions.c > acpica-unix2-20190816_iasl.patch +--- acpica-unix2-20190816_/source/compiler/asloptions.c ++++ acpica-unix2-20190816/source/compiler/asloptions.c @@ -126,6 +126,7 @@ if (Gbl_DoSignon) { diff --git a/util/crossgcc/sum/acpica-unix2-20190703.tar.gz.cksum b/util/crossgcc/sum/acpica-unix2-20190703.tar.gz.cksum deleted file mode 100644 index 9a89796..0000000 --- a/util/crossgcc/sum/acpica-unix2-20190703.tar.gz.cksum +++ /dev/null @@ -1 +0,0 @@ -c5594944f933265a53695204a0672d0808e4a580 tarballs/acpica-unix2-20190703.tar.gz diff --git a/util/crossgcc/sum/acpica-unix2-20190816.tar.gz.cksum b/util/crossgcc/sum/acpica-unix2-20190816.tar.gz.cksum new file mode 100644 index 0000000..013541c --- /dev/null +++ b/util/crossgcc/sum/acpica-unix2-20190816.tar.gz.cksum @@ -0,0 +1 @@ +fd8bc7ebb340d9c68279b3558158e7286294a72c tarballs/acpica-unix2-20190816.tar.gz -- To view, visit https://review.coreboot.org/c/coreboot/+/34907 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I72e44429f96c2ec82092c87aea46c3ff80755d4c Gerrit-Change-Number: 34907 Gerrit-PatchSet: 1 Gerrit-Owner: HAOUAS Elyes <ehaouas(a)noos.fr> Gerrit-MessageType: newchange

3 14

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit August 2019