coreboot-gerrit February 2019

coreboot-gerrit@coreboot.org

1 participants
1249 discussions

Change in ...coreboot[master]: kukui/mainboard: Add mt8183 display usecase
by yongqiang niu (Code Review) 07 Aug '19

07 Aug '19

yongqiang niu has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31517 Change subject: kukui/mainboard: Add mt8183 display usecase ...................................................................... kukui/mainboard: Add mt8183 display usecase BUG=b:80501386,b:117254947 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I4b3f04cc2d044789bab4c3f0f03b3a904714158f Signed-off-by: Yongqiang Niu <yongqiang.niu(a)mediatek.com> --- M src/mainboard/google/kukui/mainboard.c 1 file changed, 28 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/17/31517/1 diff --git a/src/mainboard/google/kukui/mainboard.c b/src/mainboard/google/kukui/mainboard.c index e1d8f5f..950dca4 100644 --- a/src/mainboard/google/kukui/mainboard.c +++ b/src/mainboard/google/kukui/mainboard.c @@ -13,9 +13,14 @@ * GNU General Public License for more details. */ +#include <bootmode.h> +#include <console/console.h> #include <device/device.h> +#include <edid.h> +#include <soc/ddp.h> #include <soc/gpio.h> #include <soc/mmu_operations.h> +#include <soc/mtcmos.h> #include <soc/usb.h> static void configure_emmc(void) @@ -37,8 +42,31 @@ setup_usb_host(); } +static void display_startup(void) +{ + struct edid edid; + + edid_set_framebuffer_bits_per_pixel(&edid, 32, 0); + + mtk_ddp_init(); + + mtk_ddp_mode_set(&edid); + + set_vbe_mode_info_valid(&edid, (uintptr_t)0); +} + static void mainboard_init(struct device *dev) { + if (display_init_required()) { + printk(BIOS_INFO, "Starting display init.\n"); + mtcmos_display_power_on(); + mtcmos_protect_display_bus(); + + display_startup(); + } else { + printk(BIOS_INFO, "Skipping display init.\n"); + } + configure_emmc(); configure_usb(); } -- To view, visit https://review.coreboot.org/c/coreboot/+/31517 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4b3f04cc2d044789bab4c3f0f03b3a904714158f Gerrit-Change-Number: 31517 Gerrit-PatchSet: 1 Gerrit-Owner: yongqiang niu <yongqiang.niu(a)mediatek.com> Gerrit-MessageType: newchange

8 20

Change in ...coreboot[master]: mediatek/mt8183: Add I2C driver code
by wang qii (Code Review) 07 Aug '19

07 Aug '19

wang qii has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30976 Change subject: mediatek/mt8183: Add I2C driver code ...................................................................... mediatek/mt8183: Add I2C driver code This patch implements i2c driver for MT8183. BUG=b:80501386 BRANCH=none TEST=Boot correctly on kukui. Change-Id: I0a4d78b494819f45951f78e5a618021000cf3463 Signed-off-by: qii wang <qii.wang(a)mediatek.com> --- M src/soc/mediatek/mt8183/Makefile.inc A src/soc/mediatek/mt8183/i2c.c M src/soc/mediatek/mt8183/include/soc/addressmap.h A src/soc/mediatek/mt8183/include/soc/i2c.h 4 files changed, 236 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/76/30976/1 diff --git a/src/soc/mediatek/mt8183/Makefile.inc b/src/soc/mediatek/mt8183/Makefile.inc index 9aa1733..b0a148f 100644 --- a/src/soc/mediatek/mt8183/Makefile.inc +++ b/src/soc/mediatek/mt8183/Makefile.inc @@ -5,6 +5,7 @@ bootblock-y += ../common/gpio.c gpio.c bootblock-y += ../common/pll.c pll.c bootblock-$(CONFIG_SPI_FLASH) += ../common/spi.c spi.c +bootblock-y += ../common/i2c.c i2c.c bootblock-y += ../common/timer.c bootblock-y += ../common/uart.c bootblock-y += ../common/wdt.c @@ -16,6 +17,7 @@ verstage-y += auxadc.c verstage-y += ../common/gpio.c gpio.c verstage-$(CONFIG_SPI_FLASH) += ../common/spi.c spi.c +verstage-y += ../common/i2c.c i2c.c verstage-y += ../common/timer.c verstage-y += ../common/uart.c verstage-y += ../common/wdt.c @@ -31,6 +33,7 @@ romstage-y += ../common/mmu_operations.c mmu_operations.c romstage-y += ../common/pmic_wrap.c pmic_wrap.c mt6358.c romstage-$(CONFIG_SPI_FLASH) += ../common/spi.c spi.c +romstage-y += ../common/i2c.c i2c.c romstage-y += ../common/timer.c romstage-y += ../common/uart.c romstage-y += ../common/wdt.c @@ -42,6 +45,7 @@ ramstage-y += ../common/mtcmos.c mtcmos.c ramstage-y += soc.c ramstage-$(CONFIG_SPI_FLASH) += ../common/spi.c spi.c +ramstage-y += ../common/i2c.c i2c.c ramstage-y += ../common/timer.c ramstage-y += ../common/uart.c ramstage-y += ../common/usb.c diff --git a/src/soc/mediatek/mt8183/i2c.c b/src/soc/mediatek/mt8183/i2c.c new file mode 100644 index 0000000..f389caf --- /dev/null +++ b/src/soc/mediatek/mt8183/i2c.c @@ -0,0 +1,171 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 MediaTek Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <assert.h> +#include <arch/io.h> +#include <soc/pll.h> +#include <soc/i2c.h> +#include <soc/gpio.h> + +#define I2C_CLK_HZ (UNIVPLL_HZ / 30) + +struct mtk_i2c mtk_i2c_bus_controller[] = { + /* i2c0 setting */ + { + .i2c_regs = (void *)(I2C_BASE + 0x2000), + .i2c_dma_regs = (void *)(I2C_DMA_BASE), + }, + + /* i2c1 setting */ + { + .i2c_regs = (void *)(I2C_BASE + 0xc000), + .i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x400), + }, + + /* i2c2 setting */ + { + .i2c_regs = (void *)(I2C_BASE + 0x4000), + .i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x200), + }, + + /* i2c3 setting */ + { + .i2c_regs = (void *)(I2C_BASE + 0xa000), + .i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x380), + }, + + /* i2c4 setting */ + { + .i2c_regs = (void *)(I2C_BASE + 0x3000), + .i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x80), + }, + + /* i2c5 setting */ + { + .i2c_regs = (void *)(I2C_BASE + 0x11000), + .i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x480), + }, + + /* i2c6 setting */ + { + .i2c_regs = (void *)(I2C_BASE), + .i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x580), + }, + + /* i2c7 setting */ + { + .i2c_regs = (void *)(I2C_BASE + 0x15000), + .i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x600), + }, + + /* i2c8 setting */ + { + .i2c_regs = (void *)(I2C_BASE + 0x16000), + .i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x680), + } +}; + +#define I2C_BUS_NUMBER ARRAY_SIZE(mtk_i2c_bus_controller) + +struct pad_func { + gpio_t gpio; + u8 func; +}; + +#define PAD_FUNC(name, func) {GPIO(name), PAD_##name##_FUNC_##func} + +static const struct pad_func i2c_funcs[I2C_BUS_NUMBER][2] = { + { + PAD_FUNC(SDA0, SDA0), + PAD_FUNC(SCL0, SCL0), + }, + { + PAD_FUNC(SDA1, SDA1), + PAD_FUNC(SCL1, SCL1), + }, + { + PAD_FUNC(SDA2, SDA2), + PAD_FUNC(SCL2, SCL2), + }, + { + PAD_FUNC(SDA3, SDA3), + PAD_FUNC(SCL3, SCL3), + }, + { + PAD_FUNC(SDA4, SDA4), + PAD_FUNC(SCL4, SCL4), + }, + { + PAD_FUNC(SDA5, SDA5), + PAD_FUNC(SCL5, SCL5), + }, + { + PAD_FUNC(CONN_TOP_DATA, SDA6), + PAD_FUNC(CONN_TOP_CLK, SCL6), + }, + { + }, + { + PAD_FUNC(CAM_RST2, SDA8), + PAD_FUNC(CAM_CLK2, SCL8), + }, +}; + +static void mtk_i2c_set_gpio_pinmux(uint8_t bus) +{ + assert(bus < I2C_BUS_NUMBER && bus != 7); + + const struct pad_func *ptr = i2c_funcs[bus]; + for (size_t i = 0; i < 2; i++) { + gpio_set_mode(ptr[i].gpio, ptr[i].func); + gpio_set_pull(ptr[i].gpio, GPIO_PULL_ENABLE, GPIO_PULL_UP); + if (bus < 6) { + gpio_set_i2c_eh(ptr[i].gpio, 0); + gpio_set_i2c_rsel(ptr[i].gpio, 3); + } + } +} + +static void mtk_i2c_speed_init(uint8_t bus) +{ + uint8_t step_div; + const uint8_t clock_div = 5; + const uint8_t sample_div = 1; + uint32_t i2c_freq; + + assert(bus < ARRAY_SIZE(mtk_i2c_bus_controller)); + + /* Calculate i2c frequency */ + step_div = DIV_ROUND_UP(I2C_CLK_HZ, + (400 * KHz * sample_div * 2) * clock_div); + i2c_freq = I2C_CLK_HZ / (step_div * sample_div * 2 * clock_div); + assert(sample_div < 8 && step_div < 64 && i2c_freq <= 400 * KHz && + i2c_freq >= 380 * KHz); + + /* Init i2c bus Timing register */ + write32(&mtk_i2c_bus_controller[bus].i2c_regs->timing, + (sample_div - 1) << 8 | (step_div - 1)); + write32(&mtk_i2c_bus_controller[bus].i2c_regs->ltiming, + (sample_div - 1) << 6 | (step_div - 1)); + + /* Init i2c bus clock_div register */ + write32(&mtk_i2c_bus_controller[bus].i2c_regs->clock_div, clock_div - 1); +} + +void mtk_i2c_init(uint8_t bus) +{ + mtk_i2c_speed_init(bus); + mtk_i2c_set_gpio_pinmux(bus); +} diff --git a/src/soc/mediatek/mt8183/include/soc/addressmap.h b/src/soc/mediatek/mt8183/include/soc/addressmap.h index d41b2b9..aaa77a3 100644 --- a/src/soc/mediatek/mt8183/include/soc/addressmap.h +++ b/src/soc/mediatek/mt8183/include/soc/addressmap.h @@ -34,8 +34,10 @@ EMI_BASE = IO_PHYS + 0x00219000, EMI_MPU_BASE = IO_PHYS + 0x00226000, DRAMC_CH_BASE = IO_PHYS + 0x00228000, + I2C_DMA_BASE = IO_PHYS + 0x01000080, AUXADC_BASE = IO_PHYS + 0x01001000, UART0_BASE = IO_PHYS + 0x01002000, + I2C_BASE = IO_PHYS + 0x01005000, SPI0_BASE = IO_PHYS + 0x0100A000, SPI1_BASE = IO_PHYS + 0x01010000, SPI2_BASE = IO_PHYS + 0x01012000, diff --git a/src/soc/mediatek/mt8183/include/soc/i2c.h b/src/soc/mediatek/mt8183/include/soc/i2c.h new file mode 100755 index 0000000..dbf9cbf --- /dev/null +++ b/src/soc/mediatek/mt8183/include/soc/i2c.h @@ -0,0 +1,59 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 MediaTek Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SOC_MEDIATEK_MT8183_I2C_H +#define SOC_MEDIATEK_MT8183_I2C_H + +#include <soc/i2c_common.h> + +/* I2C Register */ +struct mt_i2c_regs { + uint32_t data_port; + uint32_t slave_addr; + uint32_t intr_mask; + uint32_t intr_stat; + uint32_t control; + uint32_t transfer_len; + uint32_t transac_len; + uint32_t delay_len; + uint32_t timing; + uint32_t start; + uint32_t ext_conf; + uint32_t ltiming; + uint32_t hs; + uint32_t io_config; + uint32_t fifo_addr_clr; + uint32_t reserved0[2]; + uint32_t transfer_aux_len; + uint32_t clock_div; + uint32_t time_out; + uint32_t softreset; + uint32_t reserved1[36]; + uint32_t debug_stat; + uint32_t debug_ctrl; + uint32_t reserved2[2]; + uint32_t fifo_stat; + uint32_t fifo_thresh; + uint32_t reserved3[932]; + uint32_t multi_dma; + uint32_t reserved4[2]; + uint32_t rollback; +}; + +check_member(mt_i2c_regs, multi_dma, 0xf8c); + +void mtk_i2c_init(uint8_t bus); + +#endif /* SOC_MEDIATEK_MT8183_I2C_H */ -- To view, visit https://review.coreboot.org/c/coreboot/+/30976 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0a4d78b494819f45951f78e5a618021000cf3463 Gerrit-Change-Number: 30976 Gerrit-PatchSet: 1 Gerrit-Owner: wang qii <Qii.Wang(a)mediatek.com> Gerrit-MessageType: newchange

7 22

Change in ...coreboot[master]: drivers/intel/gma: Export Read_EDID() to C
by Nico Huber (Code Review) 05 Aug '19

05 Aug '19

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31458 Change subject: drivers/intel/gma: Export Read_EDID() to C ...................................................................... drivers/intel/gma: Export Read_EDID() to C Change-Id: Icf802904c569e621ca3b3105b6107936776c5cee Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M src/drivers/intel/gma/Kconfig M src/drivers/intel/gma/Makefile.inc A src/drivers/intel/gma/gma.adb M src/drivers/intel/gma/gma.ads M src/drivers/intel/gma/libgfxinit.h 5 files changed, 67 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/58/31458/1 diff --git a/src/drivers/intel/gma/Kconfig b/src/drivers/intel/gma/Kconfig index 4f897fa..f8f50c3 100644 --- a/src/drivers/intel/gma/Kconfig +++ b/src/drivers/intel/gma/Kconfig @@ -54,6 +54,9 @@ Select this option for Atom-based platforms which use the SWSMISCI register (0xe0) rather than the SWSCI register (0xe8). +config INTEL_GMA_LIBGFXINIT_EDID + bool + config GFX_GMA_ANALOG_I2C_HDMI_B bool @@ -69,7 +72,7 @@ || NORTHBRIDGE_INTEL_NEHALEM || NORTHBRIDGE_INTEL_SANDYBRIDGE \ || NORTHBRIDGE_INTEL_IVYBRIDGE || NORTHBRIDGE_INTEL_HASWELL \ || SOC_INTEL_BROADWELL || SOC_INTEL_SKYLAKE || SOC_INTEL_APOLLOLAKE - depends on MAINBOARD_USE_LIBGFXINIT + depends on MAINBOARD_USE_LIBGFXINIT || INTEL_GMA_LIBGFXINIT_EDID select RAMSTAGE_LIBHWBASE config GFX_GMA_INTERNAL_IS_EDP diff --git a/src/drivers/intel/gma/Makefile.inc b/src/drivers/intel/gma/Makefile.inc index e128ad6..cea319e 100644 --- a/src/drivers/intel/gma/Makefile.inc +++ b/src/drivers/intel/gma/Makefile.inc @@ -50,7 +50,7 @@ subdirs-y += ../../../../3rdparty/libgfxinit -ramstage-y += gma.ads +ramstage-y += gma.ads gma.adb ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-gfx_init.ads ifeq ($(CONFIG_LINEAR_FRAMEBUFFER),y) diff --git a/src/drivers/intel/gma/gma.adb b/src/drivers/intel/gma/gma.adb new file mode 100644 index 0000000..10885e6 --- /dev/null +++ b/src/drivers/intel/gma/gma.adb @@ -0,0 +1,37 @@ +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; + +package body GMA is + + function read_edid + (raw_edid : out HW.GFX.EDID.Raw_EDID_Data; + port : in Interfaces.C.int) + return Interfaces.C.int + is + use type Interfaces.C.int; + success : Boolean := true; + begin + if port not in Active_Port_Type'Pos (Active_Port_Type'First) + .. Active_Port_Type'Pos (Active_Port_Type'Last) + then + raw_edid := (others => 0); + return -2; + else + if not HW.GFX.GMA.Is_Initialized then + HW.GFX.GMA.Initialize (Success => success); + end if; + if success then + HW.GFX.GMA.Display_Probing.Read_EDID + (raw_edid, Active_Port_Type'Val (port), success); + end if; + if success then + return 0; + else + return -1; + end if; + end if; + end read_edid; + +end GMA; diff --git a/src/drivers/intel/gma/gma.ads b/src/drivers/intel/gma/gma.ads index a6ce3a4..0b4b66b 100644 --- a/src/drivers/intel/gma/gma.ads +++ b/src/drivers/intel/gma/gma.ads @@ -1,2 +1,14 @@ +with Interfaces.C; + +with HW.GFX.EDID; + package GMA is + + function read_edid + (raw_edid : out HW.GFX.EDID.Raw_EDID_Data; + Port : in Interfaces.C.int) + return Interfaces.C.int + with + Export, Convention => C, External_Name => "gma_read_edid"; + end GMA; diff --git a/src/drivers/intel/gma/libgfxinit.h b/src/drivers/intel/gma/libgfxinit.h index c67870e..c4a8a5b 100644 --- a/src/drivers/intel/gma/libgfxinit.h +++ b/src/drivers/intel/gma/libgfxinit.h @@ -14,6 +14,19 @@ #ifndef DRIVERS_INTEL_GMA_LIBGFXINIT_H #define DRIVERS_INTEL_GMA_LIBGFXINIT_H +enum { + GMA_PORT_DISABLED, + GMA_PORT_INTERNAL, + GMA_PORT_DP1, + GMA_PORT_DP2, + GMA_PORT_DP3, + GMA_PORT_HDMI1, /* or DVI */ + GMA_PORT_HDMI2, /* or DVI */ + GMA_PORT_HDMI3, /* or DVI */ + GMA_PORT_ANALOG, +}; + void gma_gfxinit(int *lightup_ok); +int gma_read_edid(unsigned char edid[], int port); #endif -- To view, visit https://review.coreboot.org/c/coreboot/+/31458 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Icf802904c569e621ca3b3105b6107936776c5cee Gerrit-Change-Number: 31458 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

4 10

Change in ...coreboot[master]: drivers/intel/gma: Enable Kabylake+ libgfxinit support
by Nico Huber (Code Review) 05 Aug '19

05 Aug '19

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31464 Change subject: drivers/intel/gma: Enable Kabylake+ libgfxinit support ...................................................................... drivers/intel/gma: Enable Kabylake+ libgfxinit support Kaby, Coffee and Whiskey Lake are all supported by the same code path in libgfxinit. TEST=Played Tint on clevo/kbl-u(n130bu). Change-Id: Ic911bda3dd62c4d37a1b74a87fb51adc6c9d6ad4 Signed-off-by: Nico Huber <nico.huber(a)secunet.com> --- M src/drivers/intel/gma/Kconfig 1 file changed, 8 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/64/31464/1 diff --git a/src/drivers/intel/gma/Kconfig b/src/drivers/intel/gma/Kconfig index 4f897fa..2dbed01 100644 --- a/src/drivers/intel/gma/Kconfig +++ b/src/drivers/intel/gma/Kconfig @@ -68,7 +68,9 @@ depends on NORTHBRIDGE_INTEL_GM45 || NORTHBRIDGE_INTEL_X4X \ || NORTHBRIDGE_INTEL_NEHALEM || NORTHBRIDGE_INTEL_SANDYBRIDGE \ || NORTHBRIDGE_INTEL_IVYBRIDGE || NORTHBRIDGE_INTEL_HASWELL \ - || SOC_INTEL_BROADWELL || SOC_INTEL_SKYLAKE || SOC_INTEL_APOLLOLAKE + || SOC_INTEL_BROADWELL || SOC_INTEL_SKYLAKE || SOC_INTEL_APOLLOLAKE \ + || SOC_INTEL_KABYLAKE || SOC_INTEL_COFFEE_LAKE \ + || SOC_INTEL_WHISKEY_LAKE depends on MAINBOARD_USE_LIBGFXINIT select RAMSTAGE_LIBHWBASE @@ -88,6 +90,7 @@ config GFX_GMA_CPU string + default "Kabylake" if SOC_INTEL_KABYLAKE || SOC_INTEL_COFFEE_LAKE || SOC_INTEL_WHISKEY_LAKE default "Broxton" if SOC_INTEL_APOLLOLAKE default "Skylake" if SOC_INTEL_SKYLAKE default "Broadwell" if SOC_INTEL_BROADWELL @@ -99,7 +102,10 @@ config GFX_GMA_CPU_VARIANT string - default "ULT" if (SOC_INTEL_SKYLAKE && !SKYLAKE_SOC_PCH_H) || SOC_INTEL_BROADWELL || NORTHBRIDGE_INTEL_HASWELL + default "ULT" if ((SOC_INTEL_COFFEELAKE || SOC_INTEL_WHISKEY_LAKE) \ + && !SOC_INTEL_CANNONLAKE_PCH_H) \ + || ((SOC_INTEL_SKYLAKE || SOC_INTEL_KABYLAKE) && !SKYLAKE_SOC_PCH_H) \ + || SOC_INTEL_BROADWELL || NORTHBRIDGE_INTEL_HASWELL default "Normal" config GFX_GMA_INTERNAL_PORT -- To view, visit https://review.coreboot.org/c/coreboot/+/31464 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ic911bda3dd62c4d37a1b74a87fb51adc6c9d6ad4 Gerrit-Change-Number: 31464 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

7 15

Change in ...coreboot[master]: [WIP] 3rdparty/libgfxinit: Update submodule pointer
by Nico Huber (Code Review) 05 Aug '19

05 Aug '19

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31457 Change subject: [WIP] 3rdparty/libgfxinit: Update submodule pointer ...................................................................... [WIP] 3rdparty/libgfxinit: Update submodule pointer Update libgfxinit: o Add support for ULX (CPU Y series) variants o Add support for Kaby/Coffee/Whiskey/Amber Lakes o Publish Read_EDID() procedure Change-Id: Ib252303708d2bb0524ecc47f498df45902ba774f Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M 3rdparty/libgfxinit 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/57/31457/1 diff --git a/3rdparty/libgfxinit b/3rdparty/libgfxinit index f70edda..47fa150 160000 --- a/3rdparty/libgfxinit +++ b/3rdparty/libgfxinit @@ -1 +1 @@ -Subproject commit f70eddafbc2c6045a14e2f8bbb3273ee738fbaf7 +Subproject commit 47fa150df7ffee54659aebfdc78ff644ad319894 -- To view, visit https://review.coreboot.org/c/coreboot/+/31457 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ib252303708d2bb0524ecc47f498df45902ba774f Gerrit-Change-Number: 31457 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

3 8

Change in ...coreboot[master]: mediatek: Refactor I2C code among similar SOCs
by wang qii (Code Review) 02 Aug '19

02 Aug '19

wang qii has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30975 Change subject: mediatek: Refactor I2C code among similar SOCs ...................................................................... mediatek: Refactor I2C code among similar SOCs Refactor I2C code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=emerge-elm coreboot Change-Id: I407d5e2a9eb29562b40bb300e39f206a94afe76c Signed-off-by: qii wang <qii.wang(a)mediatek.com> --- A src/soc/mediatek/common/i2c.c A src/soc/mediatek/common/include/soc/i2c_common.h M src/soc/mediatek/mt8173/Makefile.inc M src/soc/mediatek/mt8173/i2c.c M src/soc/mediatek/mt8173/include/soc/i2c.h 5 files changed, 390 insertions(+), 354 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/75/30975/1 diff --git a/src/soc/mediatek/common/i2c.c b/src/soc/mediatek/common/i2c.c new file mode 100644 index 0000000..73414ac --- /dev/null +++ b/src/soc/mediatek/common/i2c.c @@ -0,0 +1,273 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 MediaTek Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <string.h> +#include <assert.h> +#include <delay.h> +#include <timer.h> +#include <symbols.h> +#include <arch/io.h> +#include <soc/i2c.h> +#include <device/i2c_simple.h> + +static inline void i2c_dma_reset(struct mt_i2c_dma_regs *dma_regs) +{ + write32(&dma_regs->dma_rst, 0x1); + udelay(50); + write32(&dma_regs->dma_rst, 0x2); + udelay(50); + write32(&dma_regs->dma_rst, 0x0); + udelay(50); +} + +static inline void mtk_i2c_dump_info(uint8_t bus) +{ + struct mt_i2c_regs *regs; + + regs = mtk_i2c_bus_controller[bus].i2c_regs; + + printk(BIOS_ERR, "I2C register:\nSLAVE_ADDR %x\nINTR_MASK %x\n" + "INTR_STAT %x\nCONTROL %x\nTRANSFER_LEN %x\nTRANSAC_LEN %x\n" + "DELAY_LEN %x\nTIMING %x\nSTART %x\nFIFO_STAT %x\nIO_CONFIG %x\n" + "HS %x\nDEBUGSTAT %x\nEXT_CONF %x\n", + (read32(&regs->slave_addr)), + (read32(&regs->intr_mask)), + (read32(&regs->intr_stat)), + (read32(&regs->control)), + (read32(&regs->transfer_len)), + (read32(&regs->transac_len)), + (read32(&regs->delay_len)), + (read32(&regs->timing)), + (read32(&regs->start)), + (read32(&regs->fifo_stat)), + (read32(&regs->io_config)), + (read32(&regs->hs)), + (read32(&regs->debug_stat)), + (read32(&regs->ext_conf))); +} + +static uint32_t mtk_i2c_transfer(uint8_t bus, struct i2c_msg *seg, + enum i2c_modes read) +{ + uint32_t ret_code = I2C_OK; + uint16_t status; + uint32_t time_out_val = 0; + uint8_t addr; + uint32_t write_len = 0; + uint32_t read_len = 0; + uint8_t *write_buffer = NULL; + uint8_t *read_buffer = NULL; + struct mt_i2c_regs *regs; + struct mt_i2c_dma_regs *dma_regs; + struct stopwatch sw; + + regs = mtk_i2c_bus_controller[bus].i2c_regs; + dma_regs = mtk_i2c_bus_controller[bus].i2c_dma_regs; + + addr = seg[0].slave; + + switch (read) { + case I2C_WRITE_MODE: + assert(seg[0].len > 0 && seg[0].len <= 255); + write_len = seg[0].len; + write_buffer = seg[0].buf; + break; + + case I2C_READ_MODE: + assert(seg[0].len > 0 && seg[0].len <= 255); + read_len = seg[0].len; + read_buffer = seg[0].buf; + break; + + /* Must use special write-then-read mode for repeated starts. */ + case I2C_WRITE_READ_MODE: + assert(seg[0].len > 0 && seg[0].len <= 255); + assert(seg[1].len > 0 && seg[1].len <= 255); + write_len = seg[0].len; + read_len = seg[1].len; + write_buffer = seg[0].buf; + read_buffer = seg[1].buf; + break; + } + + /* Clear interrupt status */ + write32(&regs->intr_stat, I2C_TRANSAC_COMP | I2C_ACKERR | + I2C_HS_NACKERR); + + write32(&regs->fifo_addr_clr, 0x1); + + /* Enable interrupt */ + write32(&regs->intr_mask, I2C_HS_NACKERR | I2C_ACKERR | + I2C_TRANSAC_COMP); + + switch (read) { + case I2C_WRITE_MODE: + memcpy(_dma_coherent, write_buffer, write_len); + + /* control registers */ + write32(&regs->control, ASYNC_MODE | DMAACK_EN | + ACK_ERR_DET_EN | DMA_EN | CLK_EXT | + REPEATED_START_FLAG); + + /* Set transfer and transaction len */ + write32(&regs->transac_len, 1); + write32(&regs->transfer_len, write_len); + + /* set i2c write slave address*/ + write32(&regs->slave_addr, addr << 1); + + /* Prepare buffer data to start transfer */ + write32(&dma_regs->dma_con, I2C_DMA_CON_TX); + write32(&dma_regs->dma_tx_mem_addr, (uintptr_t)_dma_coherent); + write32(&dma_regs->dma_tx_len, write_len); + break; + + case I2C_READ_MODE: + /* control registers */ + write32(&regs->control, ASYNC_MODE | DMAACK_EN | + ACK_ERR_DET_EN | DMA_EN | CLK_EXT | + REPEATED_START_FLAG); + + /* Set transfer and transaction len */ + write32(&regs->transac_len, 1); + write32(&regs->transfer_len, read_len); + + /* set i2c read slave address*/ + write32(&regs->slave_addr, (addr << 1 | 0x1)); + + /* Prepare buffer data to start transfer */ + write32(&dma_regs->dma_con, I2C_DMA_CON_RX); + write32(&dma_regs->dma_rx_mem_addr, (uintptr_t)_dma_coherent); + write32(&dma_regs->dma_rx_len, read_len); + break; + + case I2C_WRITE_READ_MODE: + memcpy(_dma_coherent, write_buffer, write_len); + + /* control registers */ + write32(&regs->control, ASYNC_MODE | DMAACK_EN | + DIR_CHG | ACK_ERR_DET_EN | DMA_EN | + CLK_EXT | REPEATED_START_FLAG); + + /* Set transfer and transaction len */ + write32(&regs->transfer_len, write_len); + write32(&regs->transfer_aux_len, read_len); + write32(&regs->transac_len, 2); + + /* set i2c write slave address*/ + write32(&regs->slave_addr, addr << 1); + + /* Prepare buffer data to start transfer */ + write32(&dma_regs->dma_con, I2C_DMA_CLR_FLAG); + write32(&dma_regs->dma_tx_mem_addr, (uintptr_t)_dma_coherent); + write32(&dma_regs->dma_tx_len, write_len); + write32(&dma_regs->dma_rx_mem_addr, (uintptr_t)_dma_coherent); + write32(&dma_regs->dma_rx_len, read_len); + break; + } + + write32(&dma_regs->dma_int_flag, I2C_DMA_CLR_FLAG); + write32(&dma_regs->dma_en, I2C_DMA_START_EN); + + /* start transfer transaction */ + write32(&regs->start, 0x1); + + stopwatch_init_msecs_expire(&sw, 100); + + /* polling mode : see if transaction complete */ + while (1) { + status = read32(&regs->intr_stat); + if (status & I2C_HS_NACKERR) { + ret_code = I2C_TRANSFER_FAIL_HS_NACKERR; + printk(BIOS_ERR, "[i2c%d] transfer NACK error\n", bus); + mtk_i2c_dump_info(bus); + break; + } else if (status & I2C_ACKERR) { + ret_code = I2C_TRANSFER_FAIL_ACKERR; + printk(BIOS_ERR, "[i2c%d] transfer ACK error\n", bus); + mtk_i2c_dump_info(bus); + break; + } else if (status & I2C_TRANSAC_COMP) { + ret_code = I2C_OK; + memcpy(read_buffer, _dma_coherent, read_len); + break; + } + + if (stopwatch_expired(&sw)) { + ret_code = I2C_TRANSFER_FAIL_TIMEOUT; + printk(BIOS_ERR, "[i2c%d] transfer timeout:%d\n", bus, + time_out_val); + mtk_i2c_dump_info(bus); + break; + } + } + + write32(&regs->intr_stat, I2C_TRANSAC_COMP | I2C_ACKERR | + I2C_HS_NACKERR); + + /* clear bit mask */ + write32(&regs->intr_mask, I2C_HS_NACKERR | I2C_ACKERR | + I2C_TRANSAC_COMP); + + /* reset the i2c controller for next i2c transfer. */ + write32(&regs->softreset, 0x1); + + i2c_dma_reset(dma_regs); + + return ret_code; +} + +static uint8_t mtk_i2c_should_combine(struct i2c_msg *seg, int left_count) +{ + if (left_count >= 2 && + !(seg[0].flags & I2C_M_RD) && + (seg[1].flags & I2C_M_RD) && + seg[0].slave == seg[1].slave) + return 1; + else + return 0; +} + +int platform_i2c_transfer(unsigned int bus, struct i2c_msg *segments, + int seg_count) +{ + int ret = 0; + int i; + int read; + + for (i = 0; i < seg_count; i++) { + if (mtk_i2c_should_combine(&segments[i], seg_count - i)) { + read = I2C_WRITE_READ_MODE; + } else { + read = (segments[i].flags & I2C_M_RD) ? + I2C_READ_MODE : I2C_WRITE_MODE; + } + + ret = mtk_i2c_transfer(bus, &segments[i], read); + + if (ret) + break; + + if (read == I2C_WRITE_READ_MODE) + i++; + } + + return ret; +} + +void mtk_i2c_bus_init(uint8_t bus) +{ + mtk_i2c_init(bus); +} diff --git a/src/soc/mediatek/common/include/soc/i2c_common.h b/src/soc/mediatek/common/include/soc/i2c_common.h new file mode 100755 index 0000000..e455f35 --- /dev/null +++ b/src/soc/mediatek/common/include/soc/i2c_common.h @@ -0,0 +1,101 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 MediaTek Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef MTK_COMMON_I2C_H +#define MTK_COMMON_I2C_H + +/* I2C DMA Registers */ +struct mt_i2c_dma_regs { + uint32_t dma_int_flag; + uint32_t dma_int_en; + uint32_t dma_en; + uint32_t dma_rst; + uint32_t reserved1; + uint32_t dma_flush; + uint32_t dma_con; + uint32_t dma_tx_mem_addr; + uint32_t dma_rx_mem_addr; + uint32_t dma_tx_len; + uint32_t dma_rx_len; +}; + +check_member(mt_i2c_dma_regs, dma_tx_len, 0x24); + +/* I2C Configuration */ +enum { + I2C_HS_DEFAULT_VALUE = 0x0102, +}; + +enum i2c_modes { + I2C_WRITE_MODE = 0, + I2C_READ_MODE = 1, + I2C_WRITE_READ_MODE = 2, +}; + +enum { + I2C_DMA_CON_TX = 0x0, + I2C_DMA_CON_RX = 0x1, + I2C_DMA_START_EN = 0x1, + I2C_DMA_INT_FLAG_NONE = 0x0, + I2C_DMA_CLR_FLAG = 0x0, + I2C_DMA_FLUSH_FLAG = 0x1, +}; + +enum { + I2C_TRANS_LEN_MASK = (0xff), + I2C_TRANS_AUX_LEN_MASK = (0x1f << 8), + I2C_CONTROL_MASK = (0x3f << 1) +}; + +/* Register mask */ +enum { + I2C_HS_NACKERR = (1 << 2), + I2C_ACKERR = (1 << 1), + I2C_TRANSAC_COMP = (1 << 0), +}; + +/* i2c control bits */ +enum { + ASYNC_MODE = (1 << 9), + DMAACK_EN = (1 << 8), + ACK_ERR_DET_EN = (1 << 5), + DIR_CHG = (1 << 4), + CLK_EXT = (1 << 3), + DMA_EN = (1 << 2), + REPEATED_START_FLAG = (1 << 1), + STOP_FLAG = (0 << 1) +}; + +/* I2C Status Code */ + +enum { + I2C_OK = 0x0000, + I2C_SET_SPEED_FAIL_OVER_SPEED = 0xA001, + I2C_TRANSFER_INVALID_LENGTH = 0xA002, + I2C_TRANSFER_FAIL_HS_NACKERR = 0xA003, + I2C_TRANSFER_FAIL_ACKERR = 0xA004, + I2C_TRANSFER_FAIL_TIMEOUT = 0xA005, + I2C_TRANSFER_INVALID_ARGUMENT = 0xA006 +}; + +struct mtk_i2c { + struct mt_i2c_regs *i2c_regs; + struct mt_i2c_dma_regs *i2c_dma_regs; +}; + +extern struct mtk_i2c mtk_i2c_bus_controller[]; + +void mtk_i2c_bus_init(uint8_t bus); +#endif diff --git a/src/soc/mediatek/mt8173/Makefile.inc b/src/soc/mediatek/mt8173/Makefile.inc index b004c27..5a54d6d 100644 --- a/src/soc/mediatek/mt8173/Makefile.inc +++ b/src/soc/mediatek/mt8173/Makefile.inc @@ -17,7 +17,7 @@ bootblock-y += bootblock.c bootblock-$(CONFIG_SPI_FLASH) += flash_controller.c -bootblock-y += i2c.c +bootblock-y += ../common/i2c.c i2c.c bootblock-y += ../common/pll.c pll.c bootblock-y += ../common/spi.c spi.c bootblock-y += ../common/timer.c @@ -32,7 +32,7 @@ ################################################################################ -verstage-y += i2c.c +verstage-y += ../common/i2c.c i2c.c verstage-y += ../common/spi.c spi.c verstage-y += ../common/uart.c @@ -49,7 +49,7 @@ romstage-y += ../common/pll.c pll.c romstage-y += ../common/timer.c romstage-y += timer.c -romstage-y += i2c.c +romstage-y += ../common/i2c.c i2c.c romstage-y += ../common/uart.c romstage-y += ../common/cbmem.c @@ -71,7 +71,8 @@ ramstage-y += ../common/timer.c ramstage-y += timer.c ramstage-y += ../common/uart.c -ramstage-y += ../common/pmic_wrap.c pmic_wrap.c mt6391.c i2c.c +ramstage-y += ../common/i2c.c i2c.c +ramstage-y += ../common/pmic_wrap.c pmic_wrap.c mt6391.c ramstage-y += mt6311.c ramstage-y += da9212.c ramstage-y += ../common/gpio.c gpio.c diff --git a/src/soc/mediatek/mt8173/i2c.c b/src/soc/mediatek/mt8173/i2c.c index b4c3aa9..85f676c 100644 --- a/src/soc/mediatek/mt8173/i2c.c +++ b/src/soc/mediatek/mt8173/i2c.c @@ -14,19 +14,13 @@ */ #include <assert.h> -#include <delay.h> -#include <device/i2c_simple.h> -#include <string.h> -#include <symbols.h> -#include <timer.h> #include <arch/io.h> -#include <soc/addressmap.h> -#include <soc/i2c.h> #include <soc/pll.h> +#include <soc/i2c.h> #define I2C_CLK_HZ (AXI_HZ / 16) -static struct mtk_i2c i2c[7] = { +struct mtk_i2c mtk_i2c_bus_controller[7] = { /* i2c0 setting */ { .i2c_regs = (void *)I2C_BASE, @@ -68,277 +62,21 @@ } }; -#define I2CTAG "[I2C][PL] " - -#if IS_ENABLED(CONFIG_DEBUG_I2C) -#define I2CLOG(fmt, arg...) printk(BIOS_INFO, I2CTAG fmt, ##arg) -#else -#define I2CLOG(fmt, arg...) -#endif /* CONFIG_DEBUG_I2C */ - -#define I2CERR(fmt, arg...) printk(BIOS_ERR, I2CTAG fmt, ##arg) - -static inline void i2c_dma_reset(struct mt8173_i2c_dma_regs *dma_regs) +void mtk_i2c_init(uint8_t bus) { - write32(&dma_regs->dma_rst, 0x1); - udelay(50); - write32(&dma_regs->dma_rst, 0x2); - udelay(50); - write32(&dma_regs->dma_rst, 0x0); - udelay(50); -} - -void mtk_i2c_bus_init(uint8_t bus) -{ - uint8_t sample_div; uint8_t step_div; uint32_t i2c_freq; + const uint8_t sample_div = 1; - assert(bus < ARRAY_SIZE(i2c)); + assert(bus < ARRAY_SIZE(mtk_i2c_bus_controller)); /* Calculate i2c frequency */ - sample_div = 1; step_div = DIV_ROUND_UP(I2C_CLK_HZ, (400 * KHz * sample_div * 2)); i2c_freq = I2C_CLK_HZ / (step_div * sample_div * 2); assert(sample_div < 8 && step_div < 64 && i2c_freq < 400 * KHz && i2c_freq >= 380 * KHz); /* Init i2c bus Timing register */ - write32(&i2c[bus].i2c_regs->timing, (sample_div - 1) << 8 | - (step_div - 1)); -} - -static inline void mtk_i2c_dump_info(uint8_t bus) -{ - struct mt8173_i2c_regs *regs; - - regs = i2c[bus].i2c_regs; - - I2CLOG("I2C register:\nSLAVE_ADDR %x\nINTR_MASK %x\nINTR_STAT %x\n" - "CONTROL %x\nTRANSFER_LEN %x\nTRANSAC_LEN %x\nDELAY_LEN %x\n" - "TIMING %x\nSTART %x\nFIFO_STAT %x\nIO_CONFIG %x\nHS %x\n" - "DEBUGSTAT %x\nEXT_CONF %x\n", - (read32(&regs->salve_addr)), - (read32(&regs->intr_mask)), - (read32(&regs->intr_stat)), - (read32(&regs->control)), - (read32(&regs->transfer_len)), - (read32(&regs->transac_len)), - (read32(&regs->delay_len)), - (read32(&regs->timing)), - (read32(&regs->start)), - (read32(&regs->fifo_stat)), - (read32(&regs->io_config)), - (read32(&regs->hs)), - (read32(&regs->debug_stat)), - (read32(&regs->ext_conf))); - - I2CLOG("addr address %x\n", (uint32_t)regs); -} - -static uint32_t mtk_i2c_transfer(uint8_t bus, struct i2c_msg *seg, - enum i2c_modes read) -{ - uint32_t ret_code = I2C_OK; - uint16_t status; - uint32_t time_out_val = 0; - uint8_t addr; - uint32_t write_len = 0; - uint32_t read_len = 0; - uint8_t *write_buffer = NULL; - uint8_t *read_buffer = NULL; - struct mt8173_i2c_regs *regs; - struct mt8173_i2c_dma_regs *dma_regs; - struct stopwatch sw; - - regs = i2c[bus].i2c_regs; - dma_regs = i2c[bus].i2c_dma_regs; - - addr = seg[0].slave; - - switch (read) { - case I2C_WRITE_MODE: - assert(seg[0].len > 0 && seg[0].len <= 255); - write_len = seg[0].len; - write_buffer = seg[0].buf; - break; - - case I2C_READ_MODE: - assert(seg[0].len > 0 && seg[0].len <= 255); - read_len = seg[0].len; - read_buffer = seg[0].buf; - break; - - /* Must use special write-then-read mode for repeated starts. */ - case I2C_WRITE_READ_MODE: - assert(seg[0].len > 0 && seg[0].len <= 255); - assert(seg[1].len > 0 && seg[1].len <= 255); - write_len = seg[0].len; - read_len = seg[1].len; - write_buffer = seg[0].buf; - read_buffer = seg[1].buf; - break; - } - - /* Clear interrupt status */ - write32(&regs->intr_stat, I2C_TRANSAC_COMP | I2C_ACKERR | - I2C_HS_NACKERR); - - write32(&regs->fifo_addr_clr, 0x1); - - /* Enable interrupt */ - write32(&regs->intr_mask, I2C_HS_NACKERR | I2C_ACKERR | - I2C_TRANSAC_COMP); - - switch (read) { - case I2C_WRITE_MODE: - memcpy(_dma_coherent, write_buffer, write_len); - - /* control registers */ - write32(&regs->control, ACK_ERR_DET_EN | DMA_EN | CLK_EXT | - REPEATED_START_FLAG); - - /* Set transfer and transaction len */ - write32(&regs->transac_len, 1); - write32(&regs->transfer_len, write_len); - - /* set i2c write slave address*/ - write32(&regs->slave_addr, addr << 1); - - /* Prepare buffer data to start transfer */ - write32(&dma_regs->dma_con, I2C_DMA_CON_TX); - write32(&dma_regs->dma_tx_mem_addr, (uintptr_t)_dma_coherent); - write32(&dma_regs->dma_tx_len, write_len); - break; - - case I2C_READ_MODE: - /* control registers */ - write32(&regs->control, ACK_ERR_DET_EN | DMA_EN | CLK_EXT | - REPEATED_START_FLAG); - - /* Set transfer and transaction len */ - write32(&regs->transac_len, 1); - write32(&regs->transfer_len, read_len); - - /* set i2c read slave address*/ - write32(&regs->slave_addr, (addr << 1 | 0x1)); - - /* Prepare buffer data to start transfer */ - write32(&dma_regs->dma_con, I2C_DMA_CON_RX); - write32(&dma_regs->dma_rx_mem_addr, (uintptr_t)_dma_coherent); - write32(&dma_regs->dma_rx_len, read_len); - break; - - case I2C_WRITE_READ_MODE: - memcpy(_dma_coherent, write_buffer, write_len); - - /* control registers */ - write32(&regs->control, DIR_CHG | ACK_ERR_DET_EN | DMA_EN | - CLK_EXT | REPEATED_START_FLAG); - - /* Set transfer and transaction len */ - write32(&regs->transfer_len, write_len); - write32(&regs->transfer_aux_len, read_len); - write32(&regs->transac_len, 2); - - /* set i2c write slave address*/ - write32(&regs->slave_addr, addr << 1); - - /* Prepare buffer data to start transfer */ - write32(&dma_regs->dma_con, I2C_DMA_CLR_FLAG); - write32(&dma_regs->dma_tx_mem_addr, (uintptr_t)_dma_coherent); - write32(&dma_regs->dma_tx_len, write_len); - write32(&dma_regs->dma_rx_mem_addr, (uintptr_t)_dma_coherent); - write32(&dma_regs->dma_rx_len, read_len); - break; - } - - write32(&dma_regs->dma_int_flag, I2C_DMA_CLR_FLAG); - write32(&dma_regs->dma_en, I2C_DMA_START_EN); - - /* start transfer transaction */ - write32(&regs->start, 0x1); - - stopwatch_init_msecs_expire(&sw, 100); - - /* polling mode : see if transaction complete */ - while (1) { - status = read32(&regs->intr_stat); - if (status & I2C_HS_NACKERR) { - ret_code = I2C_TRANSFER_FAIL_HS_NACKERR; - I2CERR("[i2c%d transfer] transaction NACK error\n", - bus); - mtk_i2c_dump_info(bus); - break; - } else if (status & I2C_ACKERR) { - ret_code = I2C_TRANSFER_FAIL_ACKERR; - I2CERR("[i2c%d transfer] transaction ACK error\n", bus); - mtk_i2c_dump_info(bus); - break; - } else if (status & I2C_TRANSAC_COMP) { - ret_code = I2C_OK; - memcpy(read_buffer, _dma_coherent, read_len); - break; - } - - if (stopwatch_expired(&sw)) { - ret_code = I2C_TRANSFER_FAIL_TIMEOUT; - I2CERR("[i2c%d transfer] transaction timeout:%d\n", bus, - time_out_val); - mtk_i2c_dump_info(bus); - break; - } - } - - write32(&regs->intr_stat, I2C_TRANSAC_COMP | I2C_ACKERR | - I2C_HS_NACKERR); - - /* clear bit mask */ - write32(&regs->intr_mask, I2C_HS_NACKERR | I2C_ACKERR | - I2C_TRANSAC_COMP); - - /* reset the i2c controller for next i2c transfer. */ - write32(&regs->softreset, 0x1); - - i2c_dma_reset(dma_regs); - - return ret_code; -} - -static uint8_t mtk_i2c_should_combine(struct i2c_msg *seg, int left_count) -{ - if (left_count >= 2 && - !(seg[0].flags & I2C_M_RD) && - (seg[1].flags & I2C_M_RD) && - seg[0].slave == seg[1].slave) - return 1; - else - return 0; -} - -int platform_i2c_transfer(unsigned bus, struct i2c_msg *segments, - int seg_count) -{ - int ret = 0; - int i; - int read; - - for (i = 0; i < seg_count; i++) { - if (mtk_i2c_should_combine(&segments[i], seg_count - i)) { - read = I2C_WRITE_READ_MODE; - } else { - read = (segments[i].flags & I2C_M_RD) ? - I2C_READ_MODE : I2C_WRITE_MODE; - } - - ret = mtk_i2c_transfer(bus, &segments[i], read); - - if (ret) - break; - - if (read == I2C_WRITE_READ_MODE) - i++; - } - - return ret; + write32(&mtk_i2c_bus_controller[bus].i2c_regs->timing, + (sample_div - 1) << 8 | (step_div - 1)); } diff --git a/src/soc/mediatek/mt8173/include/soc/i2c.h b/src/soc/mediatek/mt8173/include/soc/i2c.h old mode 100644 new mode 100755 index 5f46e9c..f2f9cf2 --- a/src/soc/mediatek/mt8173/include/soc/i2c.h +++ b/src/soc/mediatek/mt8173/include/soc/i2c.h @@ -16,47 +16,10 @@ #ifndef SOC_MEDIATEK_MT8173_I2C_H #define SOC_MEDIATEK_MT8173_I2C_H -#include <stddef.h> - -/* I2C Configuration */ -enum { - I2C_HS_DEFAULT_VALUE = 0x0102, -}; - -enum i2c_modes { - I2C_WRITE_MODE = 0, - I2C_READ_MODE = 1, - I2C_WRITE_READ_MODE = 2, -}; - -enum { - I2C_DMA_CON_TX = 0x0, - I2C_DMA_CON_RX = 0x1, - I2C_DMA_START_EN = 0x1, - I2C_DMA_INT_FLAG_NONE = 0x0, - I2C_DMA_CLR_FLAG = 0x0, - I2C_DMA_FLUSH_FLAG = 0x1, -}; - -/* I2C DMA Registers */ -struct mt8173_i2c_dma_regs { - uint32_t dma_int_flag; - uint32_t dma_int_en; - uint32_t dma_en; - uint32_t dma_rst; - uint32_t reserved1; - uint32_t dma_flush; - uint32_t dma_con; - uint32_t dma_tx_mem_addr; - uint32_t dma_rx_mem_addr; - uint32_t dma_tx_len; - uint32_t dma_rx_len; -}; - -check_member(mt8173_i2c_dma_regs, dma_tx_len, 0x24); +#include <soc/i2c_common.h> /* I2C Register */ -struct mt8173_i2c_regs { +struct mt_i2c_regs { uint32_t data_port; uint32_t slave_addr; uint32_t intr_mask; @@ -85,48 +48,8 @@ uint32_t transfer_aux_len; }; -check_member(mt8173_i2c_regs, debug_stat, 0x64); +check_member(mt_i2c_regs, debug_stat, 0x64); -struct mtk_i2c { - struct mt8173_i2c_regs *i2c_regs; - struct mt8173_i2c_dma_regs *i2c_dma_regs; -}; - -enum { - I2C_TRANS_LEN_MASK = (0xff), - I2C_TRANS_AUX_LEN_MASK = (0x1f << 8), - I2C_CONTROL_MASK = (0x3f << 1) -}; - -/* Register mask */ -enum { - I2C_HS_NACKERR = (1 << 2), - I2C_ACKERR = (1 << 1), - I2C_TRANSAC_COMP = (1 << 0), -}; - -/* i2c control bits */ -enum { - ACK_ERR_DET_EN = (1 << 5), - DIR_CHG = (1 << 4), - CLK_EXT = (1 << 3), - DMA_EN = (1 << 2), - REPEATED_START_FLAG = (1 << 1), - STOP_FLAG = (0 << 1) -}; - -/* I2C Status Code */ - -enum { - I2C_OK = 0x0000, - I2C_SET_SPEED_FAIL_OVER_SPEED = 0xA001, - I2C_TRANSFER_INVALID_LENGTH = 0xA002, - I2C_TRANSFER_FAIL_HS_NACKERR = 0xA003, - I2C_TRANSFER_FAIL_ACKERR = 0xA004, - I2C_TRANSFER_FAIL_TIMEOUT = 0xA005, - I2C_TRANSFER_INVALID_ARGUMENT = 0xA006 -}; - -void mtk_i2c_bus_init(uint8_t bus); +void mtk_i2c_init(uint8_t bus); #endif /* SOC_MEDIATEK_MT8173_I2C_H */ -- To view, visit https://review.coreboot.org/c/coreboot/+/30975 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I407d5e2a9eb29562b40bb300e39f206a94afe76c Gerrit-Change-Number: 30975 Gerrit-PatchSet: 1 Gerrit-Owner: wang qii <Qii.Wang(a)mediatek.com> Gerrit-MessageType: newchange

7 29

Change in ...coreboot[master]: lb_tables: make lb_record_version_timestamp record sizes 64-bit aligned
by Xiang Wang (Code Review) 02 Aug '19

02 Aug '19

Xiang Wang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31383 Change subject: lb_tables: make lb_record_version_timestamp record sizes 64-bit aligned ...................................................................... lb_tables: make lb_record_version_timestamp record sizes 64-bit aligned They were sized to 32-bit algnment, this grows them to 64 bit-aligned Change-Id: Id401ed7ac24d781329686cf0a339cf9e1ea15130 Signed-off-by: Xiang Wang <wxjstz(a)126.com> --- M src/lib/coreboot_table.c 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/83/31383/1 diff --git a/src/lib/coreboot_table.c b/src/lib/coreboot_table.c index c2ae094..25d0afa 100644 --- a/src/lib/coreboot_table.c +++ b/src/lib/coreboot_table.c @@ -422,7 +422,7 @@ struct lb_timestamp *rec; rec = (struct lb_timestamp *)lb_new_record(header); rec->tag = LB_TAG_VERSION_TIMESTAMP; - rec->size = sizeof(*rec); + rec->size = ALIGN_UP(sizeof(*rec), 8); rec->timestamp = coreboot_version_timestamp; } -- To view, visit https://review.coreboot.org/c/coreboot/+/31383 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id401ed7ac24d781329686cf0a339cf9e1ea15130 Gerrit-Change-Number: 31383 Gerrit-PatchSet: 1 Gerrit-Owner: Xiang Wang <wxjstz(a)126.com> Gerrit-MessageType: newchange

1 1

Change in ...coreboot[master]: fu540: add code to initialize flash
by Xiang Wang (Code Review) 02 Aug '19

02 Aug '19

Xiang Wang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30466 Change subject: fu540: add code to initialize flash ...................................................................... fu540: add code to initialize flash SiFive's ZSBL has initialized flash, but only 16MB of space is available. I fixed it to use all 32MB. Change-Id: I8cd803369da5526eff90400c15b91bbf6b477c69 Signed-off-by: Xiang Wang <wxjstz(a)126.com> --- M src/mainboard/sifive/hifive-unleashed/Makefile.inc A src/mainboard/sifive/hifive-unleashed/bootblock.c A src/mainboard/sifive/hifive-unleashed/flash.c M src/mainboard/sifive/hifive-unleashed/romstage.c M src/soc/sifive/fu540/Makefile.inc A src/soc/sifive/fu540/include/soc/spi.h A src/soc/sifive/fu540/include/soc/spi_flash.h A src/soc/sifive/fu540/spi.c 8 files changed, 506 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/66/30466/1 diff --git a/src/mainboard/sifive/hifive-unleashed/Makefile.inc b/src/mainboard/sifive/hifive-unleashed/Makefile.inc index 27ddcba..2dac283 100644 --- a/src/mainboard/sifive/hifive-unleashed/Makefile.inc +++ b/src/mainboard/sifive/hifive-unleashed/Makefile.inc @@ -11,6 +11,10 @@ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. +bootblock-y += flash.c +bootblock-y += bootblock.c + +romstage-y += flash.c romstage-y += romstage.c bootblock-y += memlayout.ld diff --git a/src/mainboard/sifive/hifive-unleashed/bootblock.c b/src/mainboard/sifive/hifive-unleashed/bootblock.c new file mode 100644 index 0000000..777b2aa --- /dev/null +++ b/src/mainboard/sifive/hifive-unleashed/bootblock.c @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 HardenedLinux + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/addressmap.h> +#include <soc/spi.h> +#include <soc/spi_flash.h> +#include <soc/clock.h> + +extern void flash_init(void); +extern void bootblock_mainboard_init(void); + +void bootblock_mainboard_init(void) +{ + flash_init(); +} diff --git a/src/mainboard/sifive/hifive-unleashed/flash.c b/src/mainboard/sifive/hifive-unleashed/flash.c new file mode 100644 index 0000000..a29ac24 --- /dev/null +++ b/src/mainboard/sifive/hifive-unleashed/flash.c @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 HardenedLinux + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/addressmap.h> +#include <soc/spi.h> +#include <soc/spi_flash.h> +#include <soc/clock.h> + +extern void flash_init(void); + +const static spi_reg_ffmt ffmt= { + .cmd_en = 1, + .addr_len = 4, + .pad_cnt = 8, + .command_proto = SPI_PROTO_S, + .addr_proto = SPI_PROTO_S, + .data_proto = SPI_PROTO_Q, + .command_code = 0x6c +}; + + +void flash_init(void) +{ + initialize_spi_flash_mmap_quad( + (spi_ctrl*)FU540_QSPI0, + clock_get_tlclk_khz(), + ffmt.raw_bits, + 0x66, + 0x99); +} diff --git a/src/mainboard/sifive/hifive-unleashed/romstage.c b/src/mainboard/sifive/hifive-unleashed/romstage.c index 8277141..1675aca 100644 --- a/src/mainboard/sifive/hifive-unleashed/romstage.c +++ b/src/mainboard/sifive/hifive-unleashed/romstage.c @@ -21,6 +21,8 @@ #include <soc/clock.h> #include <soc/sdram.h> +extern void flash_init(void); + void main(void) { console_init(); @@ -39,6 +41,7 @@ if (IS_ENABLED(CONFIG_CONSOLE_SERIAL)) uart_init(CONFIG_UART_FOR_CONSOLE); + flash_init(); sdram_init(); cbmem_initialize_empty(); diff --git a/src/soc/sifive/fu540/Makefile.inc b/src/soc/sifive/fu540/Makefile.inc index 4f62f3e..83c7b1c 100644 --- a/src/soc/sifive/fu540/Makefile.inc +++ b/src/soc/sifive/fu540/Makefile.inc @@ -18,6 +18,7 @@ bootblock-y += media.c bootblock-y += bootblock.c bootblock-y += clock.c +bootblock-y += spi.c romstage-y += uart.c romstage-y += clint.c @@ -26,6 +27,7 @@ romstage-y += cbmem.c romstage-y += otp.c romstage-y += clock.c +romstage-y += spi.c ramstage-y += uart.c ramstage-y += clint.c @@ -34,6 +36,7 @@ ramstage-y += cbmem.c ramstage-y += otp.c ramstage-y += clock.c +ramstage-y += spi.c CPPFLAGS_common += -Isrc/soc/sifive/fu540/include diff --git a/src/soc/sifive/fu540/include/soc/spi.h b/src/soc/sifive/fu540/include/soc/spi.h new file mode 100644 index 0000000..c40ae7c --- /dev/null +++ b/src/soc/sifive/fu540/include/soc/spi.h @@ -0,0 +1,266 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 SiFive, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __SOC_SIFIVE_HIFIVE_U_SPI_H__ +#define __SOC_SIFIVE_HIFIVE_U_SPI_H__ + +#include <stdint.h> + +#define _ASSERT_SIZEOF(type, size) _Static_assert(sizeof(type) == (size), #type " must be " #size " bytes wide") + +typedef union +{ + struct + { + uint32_t pha : 1; + uint32_t pol : 1; + uint32_t reserved : 30; + }; + uint32_t raw_bits; +} spi_reg_sckmode; +_ASSERT_SIZEOF(spi_reg_sckmode, 4); + + +typedef union +{ + struct + { + uint32_t mode : 2; + uint32_t reserved : 30; + }; + uint32_t raw_bits; +} spi_reg_csmode; +_ASSERT_SIZEOF(spi_reg_csmode, 4); + + +typedef union +{ + struct + { + uint32_t cssck : 8; + uint32_t reserved0 : 8; + uint32_t sckcs : 8; + uint32_t reserved1 : 8; + }; + uint32_t raw_bits; +} spi_reg_delay0; +_ASSERT_SIZEOF(spi_reg_delay0, 4); + + +typedef union +{ + struct + { + uint32_t intercs : 8; + uint32_t reserved0 : 8; + uint32_t interxfr : 8; + uint32_t reserved1 : 8; + }; + uint32_t raw_bits; +} spi_reg_delay1; +_ASSERT_SIZEOF(spi_reg_delay1, 4); + + +typedef union +{ + struct + { + uint32_t proto : 2; + uint32_t endian : 1; + uint32_t dir : 1; + uint32_t reserved0 : 12; + uint32_t len : 4; + uint32_t reserved1 : 12; + }; + uint32_t raw_bits; +} spi_reg_fmt; +_ASSERT_SIZEOF(spi_reg_fmt, 4); + + +typedef union +{ + struct + { + uint32_t data : 8; + uint32_t reserved : 23; + uint32_t full : 1; + }; + uint32_t raw_bits; +} spi_reg_txdata; +_ASSERT_SIZEOF(spi_reg_txdata, 4); + + +typedef union +{ + struct + { + uint32_t data : 8; + uint32_t reserved : 23; + uint32_t empty : 1; + }; + uint32_t raw_bits; +} spi_reg_rxdata; +_ASSERT_SIZEOF(spi_reg_rxdata, 4); + + +typedef union +{ + struct + { + uint32_t txmark : 3; + uint32_t reserved : 29; + }; + uint32_t raw_bits; +} spi_reg_txmark; +_ASSERT_SIZEOF(spi_reg_txmark, 4); + + +typedef union +{ + struct + { + uint32_t rxmark : 3; + uint32_t reserved : 29; + }; + uint32_t raw_bits; +} spi_reg_rxmark; +_ASSERT_SIZEOF(spi_reg_rxmark, 4); + + +typedef union +{ + struct + { + uint32_t en : 1; + uint32_t reserved : 31; + }; + uint32_t raw_bits; +} spi_reg_fctrl; +_ASSERT_SIZEOF(spi_reg_fctrl, 4); + + +typedef union +{ + struct + { + uint32_t cmd_en : 1; + uint32_t addr_len : 3; + uint32_t pad_cnt : 4; + uint32_t command_proto : 2; + uint32_t addr_proto : 2; + uint32_t data_proto : 2; + uint32_t reserved : 2; + uint32_t command_code : 8; + uint32_t pad_code : 8; + }; + uint32_t raw_bits; +} spi_reg_ffmt; +_ASSERT_SIZEOF(spi_reg_ffmt, 4); + + +typedef union +{ + struct + { + uint32_t txwm : 1; + uint32_t rxwm : 1; + uint32_t reserved : 30; + }; + uint32_t raw_bits; +} spi_reg_ie; +typedef spi_reg_ie spi_reg_ip; +_ASSERT_SIZEOF(spi_reg_ie, 4); +_ASSERT_SIZEOF(spi_reg_ip, 4); + +#undef _ASSERT_SIZEOF + + +/** + * SPI control register memory map. + * + * All functions take a pointer to a SPI device's control registers. + */ +typedef volatile struct +{ + uint32_t sckdiv; + spi_reg_sckmode sckmode; + uint32_t reserved08; + uint32_t reserved0c; + + uint32_t csid; + uint32_t csdef; + spi_reg_csmode csmode; + uint32_t reserved1c; + + uint32_t reserved20; + uint32_t reserved24; + spi_reg_delay0 delay0; + spi_reg_delay1 delay1; + + uint32_t reserved30; + uint32_t reserved34; + uint32_t reserved38; + uint32_t reserved3c; + + spi_reg_fmt fmt; + uint32_t reserved44; + spi_reg_txdata txdata; + spi_reg_rxdata rxdata; + + spi_reg_txmark txmark; + spi_reg_rxmark rxmark; + uint32_t reserved58; + uint32_t reserved5c; + + spi_reg_fctrl fctrl; + spi_reg_ffmt ffmt; + uint32_t reserved68; + uint32_t reserved6c; + + spi_reg_ie ie; + spi_reg_ip ip; +} spi_ctrl; + + +void spi_tx(spi_ctrl* spictrl, uint8_t in); +uint8_t spi_rx(spi_ctrl* spictrl); +uint8_t spi_txrx(spi_ctrl* spictrl, uint8_t in); + +// Inlining header functions in C +// https://stackoverflow.com/a/23699777/7433423 + +/** + * Get smallest clock divisor that divides input_khz to a quotient less than or + * equal to max_target_khz; + */ +static inline unsigned int spi_min_clk_divisor(unsigned int input_khz, unsigned int max_target_khz) +{ + // f_sck = f_in / (2 * (div + 1)) => div = (f_in / (2*f_sck)) - 1 + // + // The nearest integer solution for div requires rounding up as to not exceed + // max_target_khz. + // + // div = ceil(f_in / (2*f_sck)) - 1 + // = floor((f_in - 1 + 2*f_sck) / (2*f_sck)) - 1 + // + // This should not overflow as long as (f_in - 1 + 2*f_sck) does not exceed + // 2^32 - 1, which is unlikely since we represent frequencies in kHz. + unsigned int quotient = (input_khz + 2 * max_target_khz - 1) / (2 * max_target_khz); + // Avoid underflow + if (quotient == 0) + return 0; + return quotient - 1; +} + +#endif /* __SOC_SIFIVE_HIFIVE_U_SPI_H__ */ diff --git a/src/soc/sifive/fu540/include/soc/spi_flash.h b/src/soc/sifive/fu540/include/soc/spi_flash.h new file mode 100644 index 0000000..9926b82 --- /dev/null +++ b/src/soc/sifive/fu540/include/soc/spi_flash.h @@ -0,0 +1,103 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 SiFive, Inc + * Copyright (C) 2018 HardenedLinux + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __SOC_SIFIVE_HIFIVE_U_SPI_FLASH_H__ +#define __SOC_SIFIVE_HIFIVE_U_SPI_FLASH_H__ + +#include <soc/spi.h> +#include <stdint.h> + +#define SPI_PROTO_S 0 +#define SPI_PROTO_D 1 +#define SPI_PROTO_Q 2 + +/** + * Set up SPI for direct, non-memory-mapped access. + */ + +static inline int initialize_spi_flash_direct( + spi_ctrl* spictrl, + unsigned int spi_clk_input_khz, + unsigned int command_enable, + unsigned int command_reset) +{ + // Max desired SPI clock is 10MHz + spictrl->sckdiv = spi_min_clk_divisor(spi_clk_input_khz, 10000); + + spictrl->fctrl.en = 0; + + spi_txrx(spictrl, command_enable); + spi_txrx(spictrl, command_reset); + + return 0; +} + +static inline int _initialize_spi_flash_mmap( + spi_ctrl* spictrl, + unsigned int spi_clk_input_khz, + uint32_t ffmt_rawbits, + unsigned int command_enable, + unsigned int command_reset) +{ + // Max desired SPI clock is 10MHz + spictrl->sckdiv = spi_min_clk_divisor(spi_clk_input_khz, 10000); + + spictrl->fctrl.en = 0; + + spi_txrx(spictrl, command_enable); + spi_txrx(spictrl, command_reset); + + spictrl->ffmt.raw_bits = ffmt_rawbits; + + spictrl->fctrl.en = 1; + __asm__ __volatile__ ("fence io, io"); + return 0; +} + + +static inline int initialize_spi_flash_mmap_single( + spi_ctrl* spictrl, + unsigned int spi_clk_input_khz, + uint32_t ffmt_rawbits, + unsigned int command_enable, + unsigned int command_reset) +{ + return _initialize_spi_flash_mmap( + spictrl, + spi_clk_input_khz, + ffmt_rawbits, + command_enable, + command_reset); +} + + +static inline int initialize_spi_flash_mmap_quad( + spi_ctrl* spictrl, + unsigned int spi_clk_input_khz, + uint32_t ffmt_rawbits, + unsigned int command_enable, + unsigned int command_reset) +{ + return _initialize_spi_flash_mmap( + spictrl, + spi_clk_input_khz, + ffmt_rawbits, + command_enable, + command_reset); +} + +#endif /* __SOC_SIFIVE_HIFIVE_U_SPI_FLASH_H__ */ + diff --git a/src/soc/sifive/fu540/spi.c b/src/soc/sifive/fu540/spi.c new file mode 100644 index 0000000..01a58dd --- /dev/null +++ b/src/soc/sifive/fu540/spi.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 SiFive, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/spi.h> + +/** + * Wait until SPI is ready for transmission and transmit byte. + */ +void spi_tx(spi_ctrl* spictrl, uint8_t in) +{ +#if __riscv_atomic + int32_t r; + do { + asm volatile ( + "amoor.w %0, %2, %1\n" + : "=r" (r), "+A" (spictrl->txdata.raw_bits) + : "r" (in) + ); + } while (r < 0); +#else + while ((int32_t) spictrl->txdata.raw_bits < 0); + spictrl->txdata.data = in; +#endif +} + + +/** + * Wait until SPI receive queue has data and read byte. + */ +uint8_t spi_rx(spi_ctrl* spictrl) +{ + int32_t out; + while ((out = (int32_t) spictrl->rxdata.raw_bits) < 0); + return (uint8_t) out; +} + + +/** + * Transmit a byte and receive a byte. + */ +uint8_t spi_txrx(spi_ctrl* spictrl, uint8_t in) +{ + spi_tx(spictrl, in); + return spi_rx(spictrl); +} + -- To view, visit https://review.coreboot.org/c/coreboot/+/30466 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I8cd803369da5526eff90400c15b91bbf6b477c69 Gerrit-Change-Number: 30466 Gerrit-PatchSet: 1 Gerrit-Owner: Xiang Wang <wxjstz(a)126.com> Gerrit-MessageType: newchange

6 50

Change in ...coreboot[master]: google/kukui: Enable config for coreboot display
by yongqiang niu (Code Review) 31 Jul '19

31 Jul '19

yongqiang niu has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31521 Change subject: google/kukui: Enable config for coreboot display ...................................................................... google/kukui: Enable config for coreboot display BUG=b:80501386,b:117254947 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I478e06686158dd77b075bcef8a41763ae26c79f9 Signed-off-by: Yongqiang Niu <yongqiang.niu(a)mediatek.com> --- M src/mainboard/google/kukui/Kconfig 1 file changed, 3 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/21/31521/1 diff --git a/src/mainboard/google/kukui/Kconfig b/src/mainboard/google/kukui/Kconfig index 9f477e5..9d2634a 100644 --- a/src/mainboard/google/kukui/Kconfig +++ b/src/mainboard/google/kukui/Kconfig @@ -37,6 +37,9 @@ select EC_GOOGLE_CHROMEEC_SPI select MAINBOARD_HAS_SPI_TPM_CR50 if VBOOT select MAINBOARD_HAS_TPM2 if VBOOT + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_FORCE_NATIVE_VGA_INIT + select HAVE_LINEAR_FRAMEBUFFER config MAINBOARD_DIR string -- To view, visit https://review.coreboot.org/c/coreboot/+/31521 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I478e06686158dd77b075bcef8a41763ae26c79f9 Gerrit-Change-Number: 31521 Gerrit-PatchSet: 1 Gerrit-Owner: yongqiang niu <yongqiang.niu(a)mediatek.com> Gerrit-MessageType: newchange

4 6

Change in ...coreboot[master]: google/kukui: boot up sspm
by Erin Lo (Code Review) 22 Jul '19

22 Jul '19

Erin Lo has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31516 Change subject: google/kukui: boot up sspm ...................................................................... google/kukui: boot up sspm Load sspm firmware form cbfs and bring up it. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui. Change-Id: I4ae6034454326f5115cd3948819adc448b67fb1c Signed-off-by: Erin Lo <erin.lo(a)mediatek.com> --- M src/mainboard/google/kukui/Kconfig M src/mainboard/google/kukui/Makefile.inc M src/mainboard/google/kukui/mainboard.c M src/soc/mediatek/mt8183/Makefile.inc M src/soc/mediatek/mt8183/include/soc/addressmap.h A src/soc/mediatek/mt8183/include/soc/sspm.h A src/soc/mediatek/mt8183/sspm.c 7 files changed, 94 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/16/31516/1 diff --git a/src/mainboard/google/kukui/Kconfig b/src/mainboard/google/kukui/Kconfig index 9f477e5..0dcdb20 100644 --- a/src/mainboard/google/kukui/Kconfig +++ b/src/mainboard/google/kukui/Kconfig @@ -65,4 +65,8 @@ default "KUKUI TEST 9847" if BOARD_GOOGLE_KUKUI default "FLAPJACK TEST 4147" if BOARD_GOOGLE_FLAPJACK +config SSPM_BIN_FILE + string "SSPM BIN FILE" + default "" + endif diff --git a/src/mainboard/google/kukui/Makefile.inc b/src/mainboard/google/kukui/Makefile.inc index a0556c1..565c3f7 100644 --- a/src/mainboard/google/kukui/Makefile.inc +++ b/src/mainboard/google/kukui/Makefile.inc @@ -25,3 +25,8 @@ ramstage-y += mainboard.c ramstage-y += memlayout.ld ramstage-y += reset.c + +cbfs-files-y += sspm +sspm-file := $(call strip_quotes,$(CONFIG_SSPM_BIN_FILE)) +sspm-type := raw +sspm-compression :=$(CBFS_COMPRESS_FLAG) diff --git a/src/mainboard/google/kukui/mainboard.c b/src/mainboard/google/kukui/mainboard.c index e1d8f5f..5aaab8b 100644 --- a/src/mainboard/google/kukui/mainboard.c +++ b/src/mainboard/google/kukui/mainboard.c @@ -13,10 +13,13 @@ * GNU General Public License for more details. */ +#include <console/console.h> +#include <cbfs.h> #include <device/device.h> #include <soc/gpio.h> #include <soc/mmu_operations.h> #include <soc/usb.h> +#include <soc/sspm.h> static void configure_emmc(void) { @@ -37,10 +40,29 @@ setup_usb_host(); } +#define BUF_SIZE (64 * KiB) +unsigned char buf[BUF_SIZE]; + +static void sspm_boot(void) +{ + size_t fw_size = cbfs_boot_load_file("sspm", buf, sizeof(buf), + CBFS_TYPE_RAW); + + if (fw_size == 0) + printk(BIOS_DEBUG, "no sspm\n"); + else + printk(BIOS_DEBUG, "sspm[0]=%#x, [%zd]=%#x\n", + buf[0], fw_size - 1, buf[fw_size - 1]); + + sspm_init(buf, BUF_SIZE); + +} + static void mainboard_init(struct device *dev) { configure_emmc(); configure_usb(); + sspm_boot(); } static void mainboard_enable(struct device *dev) diff --git a/src/soc/mediatek/mt8183/Makefile.inc b/src/soc/mediatek/mt8183/Makefile.inc index 5770a83..199b22d 100644 --- a/src/soc/mediatek/mt8183/Makefile.inc +++ b/src/soc/mediatek/mt8183/Makefile.inc @@ -49,6 +49,7 @@ ramstage-y += ../common/uart.c ramstage-y += ../common/usb.c ramstage-y += ../common/wdt.c +ramstage-y += sspm.c CPPFLAGS_common += -Isrc/soc/mediatek/mt8183/include CPPFLAGS_common += -Isrc/soc/mediatek/common/include diff --git a/src/soc/mediatek/mt8183/include/soc/addressmap.h b/src/soc/mediatek/mt8183/include/soc/addressmap.h index d41b2b9..f812224 100644 --- a/src/soc/mediatek/mt8183/include/soc/addressmap.h +++ b/src/soc/mediatek/mt8183/include/soc/addressmap.h @@ -34,6 +34,7 @@ EMI_BASE = IO_PHYS + 0x00219000, EMI_MPU_BASE = IO_PHYS + 0x00226000, DRAMC_CH_BASE = IO_PHYS + 0x00228000, + SSPM_BASE = IO_PHYS + 0x00440000, AUXADC_BASE = IO_PHYS + 0x01001000, UART0_BASE = IO_PHYS + 0x01002000, SPI0_BASE = IO_PHYS + 0x0100A000, diff --git a/src/soc/mediatek/mt8183/include/soc/sspm.h b/src/soc/mediatek/mt8183/include/soc/sspm.h new file mode 100644 index 0000000..f006ca2 --- /dev/null +++ b/src/soc/mediatek/mt8183/include/soc/sspm.h @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2019 MediaTek Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SOC_MEDIATEK_MT8183_SSPM_H +#define SOC_MEDIATEK_MT8183_SSPM_H + +#include <soc/addressmap.h> +#include <types.h> + +struct mt8183_sspm_regs { + u32 sw_rstn; +}; +static struct mt8183_sspm_regs *const mt8183_sspm = (void *)SSPM_BASE; +#define CFG_SSPM_SRAM 0x10400000 +s32 sspm_init(unsigned char *buf, int len); +#endif /* SOC_MEDIATEK_MT8183_SSPM_H */ diff --git a/src/soc/mediatek/mt8183/sspm.c b/src/soc/mediatek/mt8183/sspm.c new file mode 100644 index 0000000..a42a0f5 --- /dev/null +++ b/src/soc/mediatek/mt8183/sspm.c @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2019 MediaTek Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/barrier.h> +#include <arch/io.h> +#include <soc/gpio.h> +#include <soc/sspm.h> +#include <string.h> + +#define SSPM_UART 1 +s32 sspm_init(unsigned char *buf, int len) +{ + memcpy((void*)CFG_SSPM_SRAM, buf, len); +#if SSPM_UART + gpio_set_mode(GPIO(EINT4), PAD_EINT4_FUNC_SSPM_UTXD_AO); + gpio_set_mode(GPIO(EINT5), PAD_EINT5_FUNC_SSPM_URXD_AO); +#endif + mb(); + write32(&mt8183_sspm->sw_rstn, 0x1); + return 0; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/31516 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4ae6034454326f5115cd3948819adc448b67fb1c Gerrit-Change-Number: 31516 Gerrit-PatchSet: 1 Gerrit-Owner: Erin Lo <erin.lo(a)mediatek.com> Gerrit-MessageType: newchange

9 67

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit February 2019