Lubomir Rintel has uploaded this change for review. ( https://review.coreboot.org/21611
Change subject: mainboard: use SeaBIOS config only when it's the payload of choice
......................................................................
mainboard: use SeaBIOS config only when it's the payload of choice
It makes no sense for Das U-Boot which uses the same setting.
Change-Id: I1629aecf33cb62bb1e6856ef5627748a7dc74d8a
Signed-off-by: Lubomir Rintel <lkundrak(a)v3.sk>
---
M src/mainboard/adi/rcc-dff/Kconfig
M src/mainboard/intel/littleplains/Kconfig
M src/mainboard/intel/mohonpeak/Kconfig
3 files changed, 12 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/11/21611/1
diff --git a/src/mainboard/adi/rcc-dff/Kconfig b/src/mainboard/adi/rcc-dff/Kconfig
index 3c22a74..ab0e113 100644
--- a/src/mainboard/adi/rcc-dff/Kconfig
+++ b/src/mainboard/adi/rcc-dff/Kconfig
@@ -69,6 +69,8 @@
help
The Mohon Peak board uses COM2 (2f8) for the serial console.
+if PAYLOAD_SEABIOS
+
config PAYLOAD_CONFIGFILE
string
default "$(top)/src/mainboard/$(MAINBOARDDIR)/config_seabios"
@@ -77,4 +79,6 @@
segment. This means that USB/SATA devices will not work in SeaBIOS unless
we put the SeaBIOS buffer area down in the 0x9000 segment.
+endif # PAYLOAD_SEABIOS
+
endif # BOARD_ADI_RCC_DFF
diff --git a/src/mainboard/intel/littleplains/Kconfig b/src/mainboard/intel/littleplains/Kconfig
index 10cde71..8c4050e 100644
--- a/src/mainboard/intel/littleplains/Kconfig
+++ b/src/mainboard/intel/littleplains/Kconfig
@@ -56,6 +56,8 @@
help
The Little Plains board uses COM2 (2f8) for the serial console.
+if PAYLOAD_SEABIOS
+
config PAYLOAD_CONFIGFILE
string
default "$(top)/src/mainboard/$(MAINBOARDDIR)/config_seabios"
@@ -64,4 +66,6 @@
segment. This means that USB/SATA devices will not work in SeaBIOS unless
we put the SeaBIOS buffer area down in the 0x9000 segment.
+endif # PAYLOAD_SEABIOS
+
endif # BOARD_INTEL_LITTLEPLAINS
diff --git a/src/mainboard/intel/mohonpeak/Kconfig b/src/mainboard/intel/mohonpeak/Kconfig
index c354d1b..37a9878 100644
--- a/src/mainboard/intel/mohonpeak/Kconfig
+++ b/src/mainboard/intel/mohonpeak/Kconfig
@@ -69,6 +69,8 @@
help
The Mohon Peak board uses COM2 (2f8) for the serial console.
+if PAYLOAD_SEABIOS
+
config PAYLOAD_CONFIGFILE
string
default "$(top)/src/mainboard/$(MAINBOARDDIR)/config_seabios"
@@ -77,4 +79,6 @@
segment. This means that USB/SATA devices will not work in SeaBIOS unless
we put the SeaBIOS buffer area down in the 0x9000 segment.
+endif # PAYLOAD_SEABIOS
+
endif # BOARD_INTEL_MOHONPEAK
--
To view, visit https://review.coreboot.org/21611
To unsubscribe, visit https://review.coreboot.org/settings
Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I1629aecf33cb62bb1e6856ef5627748a7dc74d8a
Gerrit-Change-Number: 21611
Gerrit-PatchSet: 1
Gerrit-Owner: Lubomir Rintel <lkundrak(a)v3.sk>