New subject: Change in coreboot[master]: Initial device tree for Microtech etabpro Platform Intel GLK Tablet w...

4 Mar 2020

Miroslaw Kocur has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39277 )
Change subject: Inicial device tree for Microtech etabpro Platform Intel GLK Tablet with the stylus and attachable keyboard
......................................................................
Inicial device tree for Microtech etabpro
Platform Intel GLK
Tablet with the stylus and attachable keyboard
Not working so far
Changes:
- clean code
Change-Id: Ib9d755902f28b51823e16c228ee5d4fc13849798
Signed-off-by: mirek190 mirek190@gmail.com
---
A src/mainboard/microtech/Kconfig
A src/mainboard/microtech/Kconfig.name
A src/mainboard/microtech/etabpro/Kconfig
A src/mainboard/microtech/etabpro/Kconfig.name
A src/mainboard/microtech/etabpro/Makefile.inc
A src/mainboard/microtech/etabpro/board_info.txt
A src/mainboard/microtech/etabpro/bootblock.c
A src/mainboard/microtech/etabpro/devicetree.cb
A src/mainboard/microtech/etabpro/dptf.asl
A src/mainboard/microtech/etabpro/dsdt.asl
A src/mainboard/microtech/etabpro/etab.fmd
A src/mainboard/microtech/etabpro/gpio.c
A src/mainboard/microtech/etabpro/gpio.h
A src/mainboard/microtech/etabpro/mainboard.c
A src/mainboard/microtech/etabpro/memory.c
A src/mainboard/microtech/etabpro/romstage.c
A src/mainboard/microtech/etabpro/touchpad.asl
A src/mainboard/microtech/etabpro/touchpanel.asl
A src/mainboard/microtech/etabpro/variants.h
19 files changed, 1,561 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/77/39277/1

diff --git a/src/mainboard/microtech/Kconfig b/src/mainboard/microtech/Kconfig
new file mode 100644
index 0000000..a757136
--- /dev/null
+++ b/src/mainboard/microtech/Kconfig
@@ -0,0 +1,16 @@
+if VENDOR_MICROTECH
+
+choice
+	prompt "Mainboard model"
+
+source "src/mainboard/microtech/*/Kconfig.name"
+
+endchoice
+
+source "src/mainboard/microtech/*/Kconfig"
+
+config MAINBOARD_VENDOR
+	string
+	default "MCROTECH"
+
+endif # VENDOR_MICROTECH
diff --git a/src/mainboard/microtech/Kconfig.name b/src/mainboard/microtech/Kconfig.name
new file mode 100644
index 0000000..bc37123
--- /dev/null
+++ b/src/mainboard/microtech/Kconfig.name
@@ -0,0 +1,2 @@
+config VENDOR_MICROTECH
+	bool "MICROTECH"
diff --git a/src/mainboard/microtech/etabpro/Kconfig b/src/mainboard/microtech/etabpro/Kconfig
new file mode 100644
index 0000000..6c91dff
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/Kconfig
@@ -0,0 +1,66 @@
+if BOARD_MICROTECH_ETABPRO
+
+config BOARD_SPECIFIC_OPTIONS
+	def_bool y
+	select SOC_INTEL_GLK
+	select BOARD_ROMSIZE_KB_8192
+	select DRIVERS_I2C_GENERIC
+	select DRIVERS_I2C_HID
+	select HAVE_ACPI_RESUME
+	select HAVE_ACPI_TABLES
+	select INTEL_LPSS_UART_FOR_CONSOLE
+	select MAINBOARD_HAS_LPC_TPM
+# Blobs
+#	select NEED_IFWI
+#	select HAVE_IFD_BIN
+# config for GLK INTEL_EC
+# Not sure is VBOOT_NO_BOARD_SUPPORT is needed to work coreboot on GLK. Without it we got error if I choose GLK INTEL_EC...
+	select EC_ACPI
+#	select VBOOT_NO_BOARD_SUPPORT
+
+
+config	IFWI_FILE
+	string
+	default "3rdparty/blobs/mainboard/microtech/etabpro/ifwi.bin"
+
+config	IFD_BIN_PATH
+	string
+	default "3rdparty/blobs/mainboard/microtech/etabpro/ifd.bin"
+
+config BASEBOARD_GLKRVP_LAPTOP
+	def_bool y
+	select SYSTEM_TYPE_LAPTOP
+
+#config VBOOT
+#	select HAS_RECOVERY_MRC_CACHE
+#	select MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN
+
+config FMDFILE
+	string
+	default "src/mainboard/$(CONFIG_MAINBOARD_DIR)/etab.fmd"
+
+config MAINBOARD_DIR
+	string
+	default "microtech/etabpro"
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "etabpro"
+
+config MAINBOARD_FAMILY
+	string
+	default "Intel_GLK"
+
+config MAX_CPUS
+	int
+	default 2
+
+config UART_FOR_CONSOLE
+	int
+	default 2
+
+config SOC_INTEL_COMMON_BLOCK_SGX_ENABLE
+	bool
+	default y
+
+endif # BOARD_MICROTECH_ETABPRO
diff --git a/src/mainboard/microtech/etabpro/Kconfig.name b/src/mainboard/microtech/etabpro/Kconfig.name
new file mode 100644
index 0000000..ab1d1e7
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_MICROTECH_ETABPRO
+	bool "etabpro"
diff --git a/src/mainboard/microtech/etabpro/Makefile.inc b/src/mainboard/microtech/etabpro/Makefile.inc
new file mode 100644
index 0000000..3fafe9c
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/Makefile.inc
@@ -0,0 +1,10 @@
+bootblock-y += bootblock.c
+
+ramstage-y += mainboard.c
+
+bootblock-y += gpio.c
+romstage-y += memory.c
+ramstage-y += gpio.c
+
+smm-y += gpio.c
+
diff --git a/src/mainboard/microtech/etabpro/board_info.txt b/src/mainboard/microtech/etabpro/board_info.txt
new file mode 100644
index 0000000..983b2df
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/board_info.txt
@@ -0,0 +1,6 @@
+Vendor name: Microtech
+Board name: etabpro glk board 8 MB bios rom
+Category: laptop
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
diff --git a/src/mainboard/microtech/etabpro/bootblock.c b/src/mainboard/microtech/etabpro/bootblock.c
new file mode 100644
index 0000000..f0a641c
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/bootblock.c
@@ -0,0 +1,29 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "variants.h"
+#include <bootblock_common.h>
+#include <intelblocks/lpc_lib.h>
+#include <soc/gpio.h>
+
+void bootblock_mainboard_init(void)
+{
+	const struct pad_config *pads;
+	size_t num;
+
+	lpc_configure_pads();
+	pads = variant_early_gpio_table(&num);
+	gpio_configure_pads(pads, num);
+}
diff --git a/src/mainboard/microtech/etabpro/devicetree.cb b/src/mainboard/microtech/etabpro/devicetree.cb
new file mode 100644
index 0000000..e132f14
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/devicetree.cb
@@ -0,0 +1,285 @@
+chip soc/intel/apollolake
+	device cpu_cluster 0 on
+		device lapic 0 on end
+	end
+
+	register "pcie_rp_clkreq_pin[2]" = "3"    # wifi/bt
+	# Disable unused clkreq of PCIe root ports
+	register "pcie_rp_clkreq_pin[0]" = "CLKREQ_DISABLED"
+	register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED"
+	register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED"
+	register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED"
+	register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
+
+	# Set de-emphasis to disabled for PCIE WiFI (Thunderpeak)
+	# as it is required for detection
+	register "pcie_rp_deemphasis_enable[2]" = "0"
+	# Set de-emphasis to default (enabled) for remaining ports
+	register "pcie_rp_deemphasis_enable[0]" = "1"
+	register "pcie_rp_deemphasis_enable[1]" = "1"
+	register "pcie_rp_deemphasis_enable[3]" = "1"
+	register "pcie_rp_deemphasis_enable[4]" = "1"
+	register "pcie_rp_deemphasis_enable[5]" = "1"
+
+	# GPIO for PERST_0 (WLAN_PE_RST)
+	register "prt0_gpio" = "GPIO_164"
+
+	# GPE configuration
+	# Note that GPE events called out in ASL code rely on this
+	# route, i.e., if this route changes then the affected GPE
+	# offset bits also need to be changed. This sets the PMC register
+	# GPE_CFG fields.
+	# DW1 is used by:
+	#   - GPIO_63 - H1_PCH_INT_ODL
+	# DW2 is used by:
+	#   - GPIO_141 - EC_PCH_WAKE_ODL
+	#   - GPIO_142 - TRACKPAD_INT2_1V8_ODL
+	#   - GPIO_144 - PEN_EJECT_ODL
+	# DW3 is used by:
+	#   - GPIO_117 - LTE_WAKE_ODL
+	#   - GPIO_119 - WLAN_PCIE_WAKE_ODL
+	register "gpe0_dw1" = "PMC_GPE_NW_63_32"
+	register "gpe0_dw2" = "PMC_GPE_N_95_64"
+	register "gpe0_dw3" = "PMC_GPE_N_63_32"
+
+	# PL1 override 10000 mW: Due to error in the energy calculation for
+	# current VR solution. Experiments show that SoC TDP max (6W) can
+	# be reached when RAPL PL1 is set to 10W.
+	register "tdp_pl1_override_mw" = "10000"
+	# Set RAPL PL2 to 15W.
+	register "tdp_pl2_override_mw" = "15000"
+
+	# Minimum SLP S3 assertion width 28ms.
+	register "slp_s3_assertion_width_usecs" = "28000"
+
+	# Enable lpss s0ix
+	register "lpss_s0ix_enable" = "1"
+
+	# Enable DPTF
+	register "dptf_enable" = "1"
+
+	# Enable Audio Clock and Power gating
+	register "hdaudio_clk_gate_enable" = "1"
+	register "hdaudio_pwr_gate_enable" = "1"
+	register "hdaudio_bios_config_lockdown" = "1"
+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| GSPI0             | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#|                   | before memory is up       |
+	#| I2C0              | Digitizer                 |
+	#| I2C5              | Audio                     |
+	#| I2C6              | Trackpad                  |
+	#| I2C7              | Touchscreen               |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.gspi[0] = {
+			.speed_mhz = 1,
+			.early_init = 1,
+		},
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 152,
+			.fall_time_ns = 30,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 104,
+			.fall_time_ns = 52,
+		},
+		.i2c[6] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 114,
+			.fall_time_ns = 164,
+			.data_hold_time_ns = 350,
+		},
+		.i2c[7] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 76,
+			.fall_time_ns = 164,
+		},
+	}"
+
+	register "pnp_settings" = "PNP_PERF_POWER"
+
+	device domain 0 on
+		device pci 00.0 on  end	# - Host Bridge
+		device pci 00.1 on  end	# - DPTF
+		device pci 00.2 off end	# - NPK
+		device pci 02.0 off  end	# - Gen
+		device pci 03.0 off  end	# - Iunit
+		chip drivers/intel/wifi
+			register "wake" = "GPE0A_CNVI_PME_STS"
+			device pci 0c.0 on  end	# - CNVi
+		end
+		device pci 0d.0 off  end	# - P2SB
+		device pci 0d.1 off  end	# - PMC
+		device pci 0d.2 off  end	# - Fast SPI
+		device pci 0d.3 off  end	# - Shared SRAM
+		device pci 0e.0 on
+			chip drivers/generic/max98357a
+				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_91)"
+				register "sdmode_delay" = "5"
+				device generic 0 on end
+			end
+		end	# - Audio
+		device pci 0f.0 on  end	# - Heci1
+		device pci 0f.1 off  end	# - Heci2
+		device pci 0f.2 off  end	# - Heci3
+		device pci 11.0 off end	# - ISH
+		device pci 12.0 on end	# - SATA
+		device pci 13.0 on
+			chip drivers/intel/wifi
+				register "wake" = "GPE0_DW3_11"
+				device pci 00.0 on end
+			end
+		end	# - PCIe-A 0 Onboard M2 Slot(Wifi)
+		device pci 13.1 on end	# - PCIe-A 1
+		device pci 13.2 on end	# - PCIe-A 2
+		device pci 13.3 off end	# - PCIe-A 3
+		device pci 14.0 off end	# - PCIe-B 0
+		device pci 14.1 off end	# - PCIe-B 1
+		device pci 15.0 on
+			chip drivers/usb/acpi
+				register "desc" = ""Root Hub""
+				register "type" = "UPC_TYPE_HUB"
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						register "desc" = ""Left Type-C Port""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device usb 2.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Left Type-A Port""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(1, 2)"
+						device usb 2.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_109)"
+						device usb 2.2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Right Type-A Port""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(2, 2)"
+						device usb 2.3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Right Type-C Port""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device usb 2.4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""SDCard""
+						register "type" = "UPC_TYPE_EXPRESSCARD"
+						device usb 2.5 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""User Facing Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""World Facing Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.7 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_109)"
+						device usb 2.8 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Left Type-C Port""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device usb 3.0 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Left Type-A Port""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(1, 2)"
+						device usb 3.1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Right Type-A Port""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(2, 2)"
+						device usb 3.3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Right Type-C Port""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(2, 1)"
+						device usb 3.4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""SDCard""
+						register "type" = "UPC_TYPE_EXPRESSCARD"
+						device usb 3.5 on end
+					end
+				end
+			end
+		end	# - XHCI
+		device pci 15.1 off  end	# - XDCI
+		device pci 16.0 on  end	# - I2C 0
+		device pci 16.1 on  end	# - I2C 1
+		device pci 16.2 on  end	# - I2C 2
+		device pci 16.3 on  end	# - I2C 3
+		device pci 17.0 on  end	# - I2C 4
+		device pci 17.1 on  end	# - I2C 5
+		device pci 17.2 on  end	# - I2C 6
+		device pci 17.3 on end	# - I2C 7
+		device pci 18.0 on  end	# - UART 0
+		device pci 18.1 on end	# - UART 1
+		device pci 18.2 on  end	# - UART 2
+		device pci 18.3 on end	# - UART 3
+		device pci 19.0 on
+			chip drivers/spi/acpi
+				register "hid" = "ACPI_DT_NAMESPACE_HID"
+				register "compat_string" = ""google,cr50""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_63_IRQ)"
+				device spi 0 on end
+			end
+		end # - GSPI 0
+		device pci 19.1 on end	# - SPI 1
+		device pci 19.2 on  end	# - SPI 2
+		device pci 1a.0 off  end	# - PWM
+		device pci 1c.0 on  end	# - eMMC
+		device pci 1e.0 on end	# - SDIO
+		device pci 1f.0 on
+			chip ec/google/chromeec
+				device pnp 0c09.0 on end
+			end
+		end	# - ESPI
+		device pci 1f.1 on  end	# - SMBUS
+	end
+
+	# FSP provides UPD interface to execute IPC command. PMIC has
+	# I2C_Slave_Address (31:24): 0x5E, Register_Offset (23:16): 0x43,
+	# RegOrValue (15:8): 0x2 and RegAndValue (7:0) 0xF8.
+	# The register is defined as: D[7:3] RSVD, D[2:0] PWROKDELAY.
+	# uint8 RegOrValue, RegAndValue, PmicReadReg
+	# RegOrValue = (UINT8)((PmicPmcIpcCtrl >> 8) & 0Xff);
+	# RegAndValue = (UINT8)(PmicPmcIpcCtrl & 0Xff);
+	# PmicReadReg &= RegAndValue;
+	# PmicReadReg |= RegOrValue;
+	# PmicReadReg value will be programmed into PMIC D[2:0] PWROKDELAY field
+	# and D[7:3] RSVD will not be impacted.
+
+	# Configure PmicPmcIpcCtrl for PMC to program PMIC PCH_PWROK delay
+	# from 100ms to 10ms.
+	# PWROKDELAY[2:0]: 000=2.5ms, 001=5.0ms, 010=10ms, 011=15ms, 100=20ms,
+	#                  101=50ms, 110=75ms, 111=100ms (default)
+	register "PmicPmcIpcCtrl" = "0x5e4302f8"
+end
diff --git a/src/mainboard/microtech/etabpro/dptf.asl b/src/mainboard/microtech/etabpro/dptf.asl
new file mode 100644
index 0000000..f61f0b6
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/dptf.asl
@@ -0,0 +1,83 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define DPTF_CPU_PASSIVE	80
+#define DPTF_CPU_CRITICAL	90
+
+#define DPTF_TSR0_SENSOR_ID	0
+#define DPTF_TSR0_SENSOR_NAME	"Battery"
+#define DPTF_TSR0_PASSIVE	48
+#define DPTF_TSR0_CRITICAL	70
+
+#define DPTF_TSR1_SENSOR_ID	1
+#define DPTF_TSR1_SENSOR_NAME	"Ambient"
+#define DPTF_TSR1_PASSIVE	60
+#define DPTF_TSR1_CRITICAL	70
+
+#define DPTF_TSR2_SENSOR_ID	2
+#define DPTF_TSR2_SENSOR_NAME	"Charger"
+#define DPTF_TSR2_PASSIVE	55
+#define DPTF_TSR2_CRITICAL	100
+
+#define DPTF_ENABLE_CHARGER
+
+/* Charger performance states, board-specific values from charger and EC */
+Name (CHPS, Package () {
+	Package () { 0, 0, 0, 0, 255, 0xBB8, "mA", 0 },	/* 3A (MAX) */
+	Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 },	/* 1.5A */
+	Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 },	/* 1.0A */
+	Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 },	/* 0.5A */
+	Package () { 0, 0, 0, 0, 0, 0x000, "mA", 0 },	/* 0.0A */
+})
+
+Name (DTRT, Package () {
+	/* CPU Throttle Effect on CPU */
+	Package () { _SB.PCI0.TCPU, _SB.PCI0.TCPU, 100, 50, 0, 0, 0, 0 },
+
+	/* CPU Effect on Temp Sensor 0 */
+	Package () { _SB.PCI0.TCPU, _SB.DPTF.TSR0, 100, 600, 0, 0, 0, 0 },
+
+#ifdef DPTF_ENABLE_CHARGER
+	/* Charger Effect on Temp Sensor 1 */
+	Package () { _SB.DPTF.TCHG, _SB.DPTF.TSR1, 200, 600, 0, 0, 0, 0 },
+#endif
+
+	/* CPU Effect on Temp Sensor 1 */
+	Package () { _SB.PCI0.TCPU, _SB.DPTF.TSR1, 100, 600, 0, 0, 0, 0 },
+
+	/* CPU Effect on Temp Sensor 2 */
+	Package () { _SB.PCI0.TCPU, _SB.DPTF.TSR2, 100, 600, 0, 0, 0, 0 },
+})
+
+Name (MPPC, Package ()
+{
+	0x2,		/* Revision */
+	Package () {	/* Power Limit 1 */
+		0,	/* PowerLimitIndex, 0 for Power Limit 1 */
+		1600,	/* PowerLimitMinimum */
+		12000,	/* PowerLimitMaximum */
+		1000,	/* TimeWindowMinimum */
+		1000,	/* TimeWindowMaximum */
+		200	/* StepSize */
+	},
+	Package () {	/* Power Limit 2 */
+		1,	/* PowerLimitIndex, 1 for Power Limit 2 */
+		6000,	/* PowerLimitMinimum */
+		8000,	/* PowerLimitMaximum */
+		1000,	/* TimeWindowMinimum */
+		1000,	/* TimeWindowMaximum */
+		1000	/* StepSize */
+	}
+})
diff --git a/src/mainboard/microtech/etabpro/dsdt.asl b/src/mainboard/microtech/etabpro/dsdt.asl
new file mode 100644
index 0000000..89a1ac8
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/dsdt.asl
@@ -0,0 +1,51 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "gpio.h"
+
+#include <arch/acpi.h>
+DefinitionBlock(
+	"dsdt.aml",
+	"DSDT",
+	0x02,		// DSDT revision: ACPI v2.0 and up
+	OEM_ID,
+	ACPI_TABLE_CREATOR,
+	0x20110725	// OEM revision
+)
+{
+	/* global NVS and variables */
+	#include <soc/intel/apollolake/acpi/globalnvs.asl>
+	#include <cpu/intel/common/acpi/cpu.asl>
+
+	Scope (_SB) {
+		Device (PCI0)
+		{
+			#include <soc/intel/apollolake/acpi/northbridge.asl>
+			#include <soc/intel/apollolake/acpi/southbridge.asl>
+			#include <soc/intel/apollolake/acpi/pch_hda.asl>
+		}
+	}
+
+	/* Dynamic Platform Thermal Framework */
+	Scope (_SB)
+	{
+		/* Per board variant specific definitions. */
+//		#include "dptf.asl"
+		/* Include soc specific DPTF changes */
+//		#include <soc/intel/apollolake/acpi/dptf.asl>
+		/* Include common dptf ASL files */
+//		#include <soc/intel/common/acpi/dptf/dptf.asl>
+	}
+}
diff --git a/src/mainboard/microtech/etabpro/etab.fmd b/src/mainboard/microtech/etabpro/etab.fmd
new file mode 100644
index 0000000..c71088a
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/etab.fmd
@@ -0,0 +1,35 @@
+FLASH 8M {
+	SI_DESC 0x1000
+	SI_BIOS {
+		IFWI 0x2ff000
+		OBBP {
+			FMAP 0x1000
+			RO_FRID 0x40
+			GBB 0x40000
+			UNIFIED_MRC_CACHE 0x21000 {
+				RECOVERY_MRC_CACHE 0x10000
+				RW_MRC_CACHE 0x10000
+				RW_VAR_MRC_CACHE 0x1000
+			}
+			CONSOLE 0x20000
+			COREBOOT(CBFS)
+			SIGN_CSE 0x2000
+			BIOS_UNUSABLE 0x4000
+		}
+	}
+	RW_SECTION_A 0x70100 {
+		VBLOCK_A 0x10000
+		FW_MAIN_A(CBFS) 0x60000
+		RW_FWID_A 0x100
+	}
+	RW_SECTION_B 0x70100 {
+		VBLOCK_B 0x10000
+		FW_MAIN_B(CBFS) 0x60000
+		RW_FWID_B 0x100
+	}
+	SI_DEVICEEXT 0x101000 {
+		DEVICE_EXTENSION 0x100000
+		UNUSED_HOLE 0x1000
+	}
+}
+
diff --git a/src/mainboard/microtech/etabpro/gpio.c b/src/mainboard/microtech/etabpro/gpio.c
new file mode 100644
index 0000000..71c0d16
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/gpio.c
@@ -0,0 +1,286 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ */
+#include "variants.h"
+#include <gpio.h>
+#include <commonlib/helpers.h>
+
+/*
+ * Pad configuration in ramstage. The order largely follows the 'GPIO Muxing'
+ * table found in EDS vol 1, but some pins aren't grouped functionally in
+ * the table so those were moved for more logical grouping.
+ */
+static const struct pad_config gpio_table[] = {
+/* NORTHWEST COMMUNITY GPIOS */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_0, DN_20K, DEEP, NF1, IGNORE, ENPD), /* TCK */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_1, DN_20K, DEEP, NF1, IGNORE, ENPD), /* TRST_B */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_2, UP_20K, DEEP, NF1, IGNORE, ENPU), /* TMS */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_3, UP_20K, DEEP, NF1, IGNORE, ENPU), /* TDI */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_4, UP_20K, DEEP, NF1, IGNORE, ENPU), /* TDO */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_5, UP_20K, DEEP, NF1, IGNORE, ENPU), /* JTAGX */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_6, UP_20K, DEEP, NF1, IGNORE, ENPU), /* CX_PREQ_B */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_7, UP_20K, DEEP, NF1, IGNORE, ENPU), /* CX_PRDY_B */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_8, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_CLK_VNN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_9, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA0_VNN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_10, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA1_VNN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_11, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA2_VNN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_12, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA3_VNN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_13, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA4_VNN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_14, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA5_VNN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_15, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA6_VNN */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_16, DN_20K, DEEP, NF5, HIZCRx0, DISPUPD), /* TRACE_0_DATA7_VNN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_17, 1, DEEP, UP_20K, TxDRxE, SAME),/*Ec-to-SOC CS Wake */
+	PAD_CFG_GPI_APIC_IOS(GPIO_18, UP_20K, DEEP, LEVEL, NONE, IGNORE, SAME),/* Touch Pad Interrupt */
+	PAD_CFG_GPI_APIC_IOS(GPIO_19, UP_20K, DEEP, EDGE_SINGLE, NONE, TxDRxE, SAME),/*PMIC Interrupt*/
+	PAD_CFG_GPI_APIC_IOS(GPIO_20, UP_20K, DEEP, LEVEL, INVERT, IGNORE, SAME),/* Audio Codec Interrupt*/
+	PAD_CFG_NF(GPIO_21, UP_20K, DEEP, NF2), /* CNV_MFUART2_RXD */
+	PAD_CFG_NF_IOSSTATE(GPIO_22, UP_20K, DEEP, NF2, TxDRxE), /* CNV_MFUART2_TXD */
+	PAD_CFG_NF(GPIO_23, UP_20K, DEEP, NF2), /* CNV_GNSS_PABLANKIt */
+	PAD_CFG_GPO_GPIO_DRIVER(GPIO_24, 1, DEEP, DN_20K),
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_25, 1, DEEP, UP_20K, TxLASTRxE, SAME),/*WWAN /RF_KILL_GPS*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_26, UP_20K, DEEP, NF2, HIZCRx1, DISPUPD),/* NFC Interrupt */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_27, 1, DEEP, NONE, IGNORE, DISPUPD),/* RF_KILL_WiFi/WiFi_Disable */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_28, 1, DEEP, UP_20K, TxLASTRxE, DISPUPD),/* RF_KILL_BT/BT_Disable */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_29, 1, DEEP, UP_20K, HIZCRx0, DISPUPD),/* Codec Power Down: Output/ISH_GPIO_3*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_30, DN_20K, DEEP, NF1), /* ISH_GPIO_4 */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_31, DN_20K, DEEP, NF1), /* ISH_GPIO_5 */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_32, DN_20K, DEEP, NF1), /* ISH_GPIO_6 */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_33, DN_20K, DEEP, NF1), /* ISH_GPIO_7 */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_34, DN_20K, DEEP, NF1), /* ISH_GPIO_8/SUSCLK2 (1.8V) */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_35, UP_20K, DEEP, NF6), /* BSSB_CLK */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_36, UP_20K, DEEP, NF6), /* BSSB_DI */
+	PAD_CFG_GPI_SCI_IOS(GPIO_37, UP_20K, DEEP, EDGE_SINGLE, INVERT, IGNORE, SAME),/*Runtime SCI */
+	PAD_CFG_GPI_SCI_IOS(GPIO_38, UP_20K, DEEP, EDGE_SINGLE, INVERT, IGNORE, SAME),/*Wake SCI */
+	PAD_CFG_GPI_APIC_IOS(GPIO_39, DN_20K, DEEP, LEVEL, NONE, IGNORE, SAME),/* Finger Print Sensor Interrupt  (DRDY) */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_40, UP_20K, DEEP, NF6),/*IERR (USB Camera Power Enable)*/
+	PAD_CFG_GPI_SMI_IOS(GPIO_41, UP_20K, DEEP, EDGE_SINGLE, NONE, IGNORE, SAME),/*SOC_EXTSMI_N */
+	PAD_CFG_NF(GPIO_42, DN_20K, DEEP, NF1), /* GP_INTD_DSI_TE1 */
+	PAD_CFG_NF(GPIO_43, DN_20K, DEEP, NF1), /* GP_INTD_DSI_TE2 */
+	PAD_CFG_NF(GPIO_44, UP_20K, DEEP, NF1), /* USB_OC0_B */
+	PAD_CFG_NF(GPIO_45, UP_20K, DEEP, NF1), /* USB_OC1_B */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_46, UP_20K, DEEP, NF1, HIZCRx1, SAME), /* DSI_I2C_SDA */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_47, UP_20K, DEEP, NF1, HIZCRx1, ENPU), /* DSI_I2C_SCL */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_48, UP_1K, DEEP, NF1), /* PMC_I2C_SDA */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_49, UP_1K, DEEP, NF1), /* PMC_I2C_SCL */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_50, UP_2K, DEEP, NF1, HIZCRx1, ENPU), /* LPSS_I2C0_SDA  - Audio Codec*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_51, UP_2K, DEEP, NF1, HIZCRx1, ENPU), /* LPSS_I2C0_SCL - Audio Codec */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_52, UP_20K, DEEP, NF1, HIZCRx1, ENPU), /* LPSS_I2C1_SDA - NFC */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_53, UP_20K, DEEP, NF1, HIZCRx1, ENPU), /* LPSS_I2C1_SCL - NFC */
+	PAD_CFG_GPIO_DRIVER_HI_Z(GPIO_54, UP_20K, DEEP, HIZCRx1, ENPU),/*LPSS_I2C2_SDA*/
+	PAD_CFG_GPIO_DRIVER_HI_Z(GPIO_55, UP_20K, DEEP, HIZCRx1, ENPU),/*LPSS_I2C2_SCL*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_56, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/* I2C3-SDA -  DBG (PSS, SINAI2, MIPI) */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_57, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/*I2C3-SCL -  DBG (PSS, SINAI2, MIPI) */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_58, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/*I2C4-SDA - Touch Pad*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_59, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/*I2C4-SCL - Touch Pad*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_60, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/* UART0-RXD - M.2dGNSS */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_61, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/* UART0-TXD - M.2dGNSS */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_62, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/* UART0-RTS_B - M.2 dGNSS */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_63, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/* UART0-CTS_B - M.2 dGNSS */
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_64, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*LPSS_UART2_RXD*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_65, UP_20K, DEEP, NF1, TxLASTRxE, DISPUPD),/*LPSS_UART2_TXD*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_66, 1, DEEP, UP_20K, TxDRxE, DISPUPD),/*RF_KILL_WWAN */
+#if CONFIG(TPM_ON_FAST_SPI)
+	PAD_CFG_GPI_INT(GPIO_67, UP_20K, DEEP, LEVEL),/*SPI TPM Interrupt */
+#endif
+	PAD_CFG_NF(GPIO_68, UP_20K, DEEP, NF1),/*PMC_SPI_FS0*/
+	PAD_CFG_GPI_APIC(GPIO_69, DN_20K, DEEP, EDGE_SINGLE, NONE),/*SIM Detect*/
+	PAD_CFG_NF(GPIO_70, DN_20K, DEEP, NF1),/*PMC_SPI_FS2*/
+	PAD_CFG_NF(GPIO_71, DN_20K, DEEP, NF1),/*PMC_SPI_RXD*/
+	PAD_CFG_NF(GPIO_72, DN_20K, DEEP, NF1),/*PMC_SPI_TXD*/
+	PAD_CFG_NF(GPIO_73, DN_20K, DEEP, NF1),/*PMC_SPI_CLK*/
+	PAD_CFG_NF(GPIO_74, DN_20K, DEEP, NF1),/*THERMTRIP_B*/
+	PAD_CFG_NF_IOSSTATE(GPIO_75, UP_20K, DEEP, NF1, HIZCRx1),/*PROCHOT_B*/
+	PAD_CFG_NF_IOSSTATE(GPIO_211, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC_RST_B*/
+	PAD_CFG_GPI_GPIO_DRIVER(GPIO_212, UP_20K, DEEP),/*Touch Panel Int*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_213, 1, DEEP, NONE, HIZCRx0, SAME),/*DNX LED - CSE owned*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_214, 1, DEEP, NONE, HIZCRx0, SAME),/*LAN Isolate*/
+/* NORTH COMMUNITY GPIOS */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_76, UP_20K, DEEP, NF1),/*SVID Alert*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_77, UP_20K, DEEP, NF1),/* SVID Data */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_78, UP_20K, DEEP, NF1),/* SVID Clk */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_79, NATIVE, DEEP, NF1),/* Finger Print Sensor */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_80, NATIVE, DEEP, NF1),/* Finger Print Sensor CS */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_81, NONE, DEEP, NF3),/* FST_SPI_CS2_B - TPM */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_82, NATIVE, DEEP, NF1),/* Finger Print Sensor */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_83, NATIVE, DEEP, NF1),/* Finger Print Sensor */
+	PAD_CFG_NF_IOSSTATE(GPIO_84, NONE, DEEP, NF3, HIZCRx1),/* SPI iTouch*/
+	PAD_CFG_NF_IOSSTATE(GPIO_85, DN_20K, DEEP, NF3, HIZCRx1),/*Function 3: SPI iTouch CS*/
+	PAD_CFG_NF_IOSSTATE(GPIO_86, DN_20K, DEEP, NF3, HIZCRx1),/*Function 3: SPI iTouch*/
+	PAD_CFG_NF_IOSSTATE(GPIO_87, DN_20K, DEEP, NF3, HIZCRx1),/*Function 3: SPI iTouch*/
+	PAD_CFG_NF_IOSSTATE(GPIO_88, DN_20K, DEEP, NF3, HIZCRx1),/*Function 3: SPI iTouch*/
+	PAD_CFG_NF_IOSSTATE(GPIO_89, DN_20K, DEEP, NF3, HIZCRx1),/*Function 3: SPI iTouch*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_90, NATIVE, DEEP, NF1),/*Function 1: FST SPI Boot Flash CS*/
+	PAD_CFG_GPIO_HI_Z(GPIO_91, NATIVE, DEEP, IGNORE, SAME),/*FST_SPI_CS1_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_92, DN_20K, DEEP, NF1),/*FST_SPI_MOSI_IO0*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_93, NATIVE, DEEP, NF1),/*FST_SPI_MISO_IO1*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_94, NATIVE, DEEP, NF1),/*FST_SPI_IO2*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_95, NATIVE, DEEP, NF1),/*FST_SPI_IO3*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_96, NATIVE, DEEP, NF1),/*FST_SPI_CLK*/
+	PAD_CFG_NF(GPIO_97, NATIVE, DEEP, NF1),/*FST_SPI_CLK_FB*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_98, NONE, DEEP, NF1),/*PMU_PLTRST_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_99, UP_20K, DEEP, NF1),/*PMU_PWRBTN_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_100, NONE, DEEP, NF1),/*PMU_SLP_S0_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_101, NONE, DEEP, NF1),/*PMU_SLP_S3_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_102, NONE, DEEP, NF1),/*PMU_SLP_S4_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_103, NONE, DEEP, NF1),/*SUSPWRDNACK*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_104, UP_20K, DEEP, NF1),/*EMMC_DNX_PWR_EN_B*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx0RxDCRx0, SAME),/*x4 Slot-2 Reset*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_106, UP_20K, DEEP, NF1),/*PMU_BATLOW_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_107, UP_20K, DEEP, NF1),/*PMU_RESETBUTTON_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_108, NONE, DEEP, NF1),/*PMU_SUSCLK*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_109, NONE, DEEP, NF1),/*SUS_STAT_B*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_110, UP_20K, DEEP, NF2, HIZCRx1, ENPU),/*LPSS_I2C5_SDA*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_111, UP_20K, DEEP, NF2, HIZCRx1, ENPU),/*LPSS_I2C5_SCL*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_112, UP_20K, DEEP, NF2, HIZCRx1, ENPU),/*LPSS_I2C6_SDA*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_113, UP_20K, DEEP, NF2, HIZCRx1, ENPU),/*LPSS_I2C6_SCL*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_114, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/*LPSS_I2C7_SDA*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_115, UP_20K, DEEP, NF1, HIZCRx1, ENPU),/*LPSS_I2C7_SCL*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_116, UP_20K, DEEP, NF1),/*PCIE_WAKE0_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_117, UP_20K, DEEP, NF1),/*PCIE_WAKE1_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_118, UP_20K, DEEP, NF1),/*PCIE_WAKE2_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_119, UP_20K, DEEP, NF1),/*PCIE_WAKE3_B*/
+	PAD_CFG_GPI(GPIO_120, UP_20K, DEEP),     /* unused */
+	PAD_CFG_GPI(GPIO_121, UP_20K, DEEP),     /* unused */
+	PAD_CFG_GPI(GPIO_122, UP_20K, DEEP),     /* unused */
+	PAD_CFG_NF_IOSSTATE(GPIO_123, UP_20K, DEEP, NF1, HIZCRx1),/*PCIE_CLKREQ3_B*/
+	PAD_CFG_NF_IOSSTATE(GPIO_124, UP_20K, DEEP, NF1, HIZCRx0),/*HV_DDI0_DDC_SDA*/
+	PAD_CFG_NF_IOSSTATE(GPIO_125, UP_20K, DEEP, NF1, HIZCRx0),/*HV_DDI0_DDC_SCL*/
+	PAD_CFG_NF_IOSSTATE(GPIO_126, UP_20K, DEEP, NF1, HIZCRx0),/*HV_DDI1_DDC_SDA*/
+	PAD_CFG_NF_IOSSTATE(GPIO_127, UP_20K, DEEP, NF1, HIZCRx0),/*HV_DDI1_DDC_SCL*/
+	PAD_CFG_NF_IOSSTATE(GPIO_128, NONE, DEEP, NF1, Tx0RxDCRx0),/*PANEL0_VDDEN*/
+	PAD_CFG_NF_IOSSTATE(GPIO_129, NONE, DEEP, NF1, Tx0RxDCRx0),/*PANEL0_BKLTEN*/
+	PAD_CFG_NF_IOSSTATE(GPIO_130, NONE, DEEP, NF1, Tx0RxDCRx0),/*PANEL0_BKLTCTL*/
+	PAD_CFG_NF_IOSSTATE(GPIO_131, UP_20K, DEEP, NF1, TxDRxE),/*HV_DDI0_HPD*/
+	PAD_CFG_NF_IOSSTATE(GPIO_132, UP_20K, DEEP, NF1, TxDRxE),/*HV_DDI1_HPD*/
+	PAD_CFG_NF_IOSSTATE(GPIO_133, UP_20K, DEEP, NF1, TxDRxE),/*HV_EDP_HPD*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_134, 1, DEEP, UP_20K, IGNORE, SAME),/*Slot-1 Power Enable*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_135, 1, DEEP, UP_20K, IGNORE, SAME),/*Slot-2 Power Enable*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_136, 1, DEEP, NONE, Tx0RxDCRx0, SAME),/*DGPU Power Select*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_137, 1, DEEP, UP_20K, IGNORE, SAME),/*slot-1 Reset*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_138, UP_20K, DEEP, NF2, HIZCRx1, DISPUPD),/*SATA_GP0 (DC RTD3 need)*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_139, UP_20K, DEEP, NF2, TxLASTRxE, DISPUPD),/*SATA_GP1 (ZPODD_DEV_DET)*/
+	PAD_CFG_NF(GPIO_140, UP_20K, DEEP, NF5),/*SATA_DEVSLP0 (DC DEV SLP)*/
+	PAD_CFG_NF_IOSSTATE(GPIO_141, UP_20K, DEEP, NF5, HIZCRx1),/*SATA_DEVSLP1 (ZPODD DEV ATN)*/
+	PAD_CFG_NF_IOSSTATE(GPIO_142, UP_20K, DEEP, NF5, HIZCRx1),/*SATA_LED*/
+	PAD_CFG_GPI_APIC_IOS(GPIO_143, NONE, DEEP, LEVEL, NONE, HIZCRx1, SAME),/*DGPU Power Ok*/
+	PAD_CFG_NF_IOSSTATE(GPIO_144, UP_20K, DEEP, NF5, HIZCRx1),/*PANEL1_VDDEN*/
+	PAD_CFG_NF_IOSSTATE(GPIO_145, UP_20K, DEEP, NF5, HIZCRx1),/*PANEL1_BKLTEN*/
+	PAD_CFG_NF_IOSSTATE(GPIO_146, UP_20K, DEEP, NF5, HIZCRx1),/*PANEL1_BKLTCTL*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_157, 1, DEEP, UP_20K, IGNORE, SAME),/*WWAN_Reset/dGPS Reset*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_158, 0, DEEP, DN_20K, IGNORE, SAME),/*NFC_DFU*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_159, 1, DEEP, NONE, Tx0RxDCRx0, SAME),/*NFC reset*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_160, 0, DEEP, UP_20K, IGNORE, SAME),/*SD_MODE for spk*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_161, 1, DEEP, UP_20K, IGNORE, SAME),/*Touch panel reset*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_162, DN_20K, DEEP, NF1, HIZCRx1, SAME),/*AVS_I2S1_BCLK*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_163, DN_20K, DEEP, NF1, HIZCRx1, SAME),/*AVS_I2S1_WS_SYNC*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_164, 1, DEEP, NONE, Tx0RxDCRx0, SAME),/*Touch Panel Power Enable*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_165, DN_20K, DEEP, NF1, HIZCRx1, SAME),/*AVS_I2S1_SDO*/
+
+/* AUDIO COMMUNITY GPIOS*/
+
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_166, DN_20K, DEEP, NF2, HIZCRx1, SAME),/*AVS_I2S2_BCLK*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_167, DN_20K, DEEP, NF2, HIZCRx1, SAME),/*AVS_I2S2_WS_SYNC*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_168, DN_20K, DEEP, NF2, HIZCRx1, SAME),/* AVS_I2S2_SDI*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_169, DN_20K, DEEP, NF2, HIZCRx1, SAME),/*AVS_I2S2_SD0*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_170, DN_20K, DEEP, NF2, HIZCRx1, SAME),/*AVS_I2S1_MCLK*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_171, DN_20K, DEEP, NF1),/*AVS_M_CLK_A1*/
+	PAD_CFG_NF_IOSSTATE(GPIO_172, DN_20K, DEEP, NF1, HIZCRx1),/*AVS_M_CLK_B1*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_173, DN_20K, DEEP, NF1),/*AVS_M_DATA_1*/
+	PAD_CFG_NF_IOSSTATE(GPIO_174, DN_20K, DEEP, NF1, HIZCRx1),/*AVS_M_CLK_AB2*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_175, DN_20K, DEEP, NF1, HIZCRx1, ENPD),/*AVS_M_DATA_2*/
+
+/* SCC COMMUNITY GPIOS */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_176, UP_20K, DEEP, NF1),/*SMB_ALERTB*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_177, UP_20K, DEEP, NF1),/*SMB_CLK*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_178, UP_20K, DEEP, NF1),/*SMB_DATA*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_187, DN_20K, DEEP, NF1),/*SDCARD_LVL_WP*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_179, DN_20K, DEEP, NF1, HIZCRx0, DISPUPD),/*SDCARD_CLK*/
+	PAD_CFG_NF(GPIO_180, DN_20K, DEEP, NF1),/*SDCARD_CLK_FB*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_181, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*SDCARD_D0*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_182, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*SDCARD_D1*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_183, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*SDCARD_D2*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_184, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*SDCARD_D3*/
+	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_185, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/*SDCARD_CMD*/
+	PAD_CFG_NF(GPIO_186, NONE, DEEP, NF1),/*SDCARD_CD_B*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_188, 0, DEEP, NONE, TxDRxE, SAME),/*SD Card*/
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_210, 1, DEEP, UP_20K, HIZCRx0, DISPUPD),
+	PAD_CFG_NF_IOSSTATE(GPIO_189, DN_20K, DEEP, NF1, HIZCRx0),/*OSC_CLK_OUT_0*/
+	PAD_CFG_NF_IOSSTATE(GPIO_190, DN_20K, DEEP, NF1, HIZCRx0),/*OSC_CLK_OUT_1*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_191, NONE, DEEP, NF1),/*CNV_BRI_DT*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_192, UP_20K, DEEP, NF1),/*CNV_BRI_RSP*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_193, NONE, DEEP, NF1),/*CNV_RGI_DT*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_194, UP_20K, DEEP, NF1),/*CNV_RGI_RSP*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_195, NONE, DEEP, NF1),/*CNV_RF_RESET_B*/
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_196, NONE, DEEP, NF1),/*XTAL_CLKREQ*/
+	PAD_CFG_NF(GPIO_197, DN_20K, DEEP, NF1),/*SDIO_CLK_FB*/
+	PAD_CFG_NF_IOSSTATE(GPIO_198, DN_20K, DEEP, NF1, HIZCRx0),/*EMMC0_CLK*/
+	PAD_CFG_NF(GPIO_199, DN_20K, DEEP, NF1),/*EMMC0_CLK_FB*/
+	PAD_CFG_NF_IOSSTATE(GPIO_200, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D0*/
+	PAD_CFG_NF_IOSSTATE(GPIO_201, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D1*/
+	PAD_CFG_NF_IOSSTATE(GPIO_202, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D2*/
+	PAD_CFG_NF_IOSSTATE(GPIO_203, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D3*/
+	PAD_CFG_NF_IOSSTATE(GPIO_204, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D4*/
+	PAD_CFG_NF_IOSSTATE(GPIO_205, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D5*/
+	PAD_CFG_NF_IOSSTATE(GPIO_206, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D6*/
+	PAD_CFG_NF_IOSSTATE(GPIO_207, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_D7*/
+	PAD_CFG_NF_IOSSTATE(GPIO_208, UP_20K, DEEP, NF1, HIZCRx1),/*EMMC0_CMD*/
+	PAD_CFG_NF_IOSSTATE(GPIO_209, DN_20K, DEEP, NF1, HIZCRx0),/*EMMC0_STROBE*/
+};
+
+const struct pad_config * __weak variant_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(gpio_table);
+	return gpio_table;
+}
+
+/* GPIOs needed prior to ramstage. */
+static const struct pad_config early_gpio_table[] = {
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_177, UP_20K, DEEP, NF1), /* SMB_CLK */
+	PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_178, UP_20K, DEEP, NF1), /* SMB_DATA */
+};
+
+const struct pad_config * __weak
+variant_early_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(early_gpio_table);
+	return early_gpio_table;
+}
+
+/* GPIO settings before entering sleep. */
+static const struct pad_config sleep_gpio_table[] = {
+#if 0
+	PAD_CFG_GPO(GPIO_150, 0, DEEP),		/* NFC_RESET_ODL */
+	PAD_CFG_GPI_APIC_LOW(GPIO_20, NONE, DEEP),	/* NFC_INT_L */
+#endif
+};
+
+const struct pad_config * __weak
+variant_sleep_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(sleep_gpio_table);
+	return sleep_gpio_table;
+}
+
+static const struct cros_gpio cros_gpios[] = {
+#if 0
+	CROS_GPIO_REC_AL(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME),
+	CROS_GPIO_WP_AH(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME),
+#endif
+};
+
+const struct cros_gpio * __weak variant_cros_gpios(size_t *num)
+{
+	*num = ARRAY_SIZE(cros_gpios);
+	return cros_gpios;
+}
diff --git a/src/mainboard/microtech/etabpro/gpio.h b/src/mainboard/microtech/etabpro/gpio.h
new file mode 100644
index 0000000..170e87c
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/gpio.h
@@ -0,0 +1,42 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef BASEBOARD_GPIO_H
+#define BASEBOARD_GPIO_H
+
+#include <soc/gpio.h>
+
+/*
+ * GPIO_11 for SCI is routed to GPE0_DW1 and maps to group GPIO_GPE_N_31_0
+ * which is North community
+ */
+#if CONFIG(SOC_ESPI)
+#define EC_SCI_GPI	GPE0A_ESPI_SCI_STS
+#else
+#define EC_SCI_GPI	GPE0_DW1_05
+#endif
+
+/* EC SMI */
+#define EC_SMI_GPI	GPIO_41
+
+#define GPE_EC_WAKE	GPE0_DW1_06
+
+/*  Memory SKU GPIOs. */
+#define MEM_CONFIG3	GPIO_45
+#define MEM_CONFIG2	GPIO_38
+#define MEM_CONFIG1	GPIO_102
+#define MEM_CONFIG0	GPIO_101
+
+#endif /* BASEBOARD_GPIO_H */
diff --git a/src/mainboard/microtech/etabpro/mainboard.c b/src/mainboard/microtech/etabpro/mainboard.c
new file mode 100644
index 0000000..15e81a9
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/mainboard.c
@@ -0,0 +1,69 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <arch/acpi.h>
+#include "variants.h"
+#include <console/console.h>
+#include <device/device.h>
+#include <ec/ec.h>
+#include <nhlt.h>
+#include <soc/gpio.h>
+#include <soc/nhlt.h>
+#include "gpio.h"
+
+static void mainboard_init(void *chip_info)
+{
+	const struct pad_config *pads;
+	size_t num;
+
+	pads = variant_gpio_table(&num);
+	gpio_configure_pads(pads, num);
+
+//	mainboard_ec_init();
+}
+
+static unsigned long mainboard_write_acpi_tables(
+	struct device *device, unsigned long current, acpi_rsdp_t *rsdp)
+{
+	uintptr_t start_addr;
+	uintptr_t end_addr;
+	struct nhlt *nhlt;
+
+	start_addr = current;
+
+	nhlt = nhlt_init();
+
+	if (nhlt == NULL)
+		return start_addr;
+
+//	variant_nhlt_init(nhlt);
+
+	end_addr = nhlt_soc_serialize(nhlt, start_addr);
+
+	if (end_addr != start_addr)
+		acpi_add_table(rsdp, (void *)start_addr);
+
+	return end_addr;
+}
+
+static void mainboard_enable(struct device *dev)
+{
+	dev->ops->write_acpi_tables = mainboard_write_acpi_tables;
+	dev->ops->acpi_inject_dsdt_generator = chromeos_dsdt_generator;
+}
+
+struct chip_operations mainboard_ops = {
+	.init = mainboard_init,
+	.enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/microtech/etabpro/memory.c b/src/mainboard/microtech/etabpro/memory.c
new file mode 100644
index 0000000..2a4c43e
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/memory.c
@@ -0,0 +1,143 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include "variants.h"
+#include <gpio.h>
+#include <soc/meminit.h>
+#include "gpio.h"
+
+const struct lpddr4_swizzle_cfg baseboard_lpddr4_swizzle = {
+	/* CH0_DQA[0:31] SoC pins -> U22 LPDDR4 module pins */
+	.phys[LP4_PHYS_CH0A] = {
+		/* DQA[0:7] pins of LPDDR4 module. */
+		.dqs[LP4_DQS0] = { 6, 7, 5, 4, 3, 1, 0, 2 },
+		/* DQA[8:15] pins of LPDDR4 module. */
+		.dqs[LP4_DQS1] = { 12, 10, 11, 13, 14, 8, 9, 15 },
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS2] = { 16, 22, 23, 20, 18, 17, 19, 21 },
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS3] = { 30, 28, 29, 25, 24, 26, 27, 31 },
+	},
+	.phys[LP4_PHYS_CH0B] = {
+		/* DQA[0:7] pins of LPDDR4 module. */
+		.dqs[LP4_DQS0] = { 7, 3, 5, 2, 6, 0, 1, 4 },
+		/* DQA[8:15] pins of LPDDR4 module. */
+		.dqs[LP4_DQS1] = { 9, 14, 12, 13, 10, 11, 8, 15 },
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS2] = { 20, 22, 23, 16, 19, 17, 18, 21 },
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS3] = { 28, 24, 26, 27, 29, 30, 31, 25 },
+	},
+	.phys[LP4_PHYS_CH1A] = {
+		/* DQA[0:7] pins of LPDDR4 module. */
+		.dqs[LP4_DQS0] = { 2, 1, 6, 7, 5, 4, 3, 0 },
+		/* DQA[8:15] pins of LPDDR4 module. */
+		.dqs[LP4_DQS1] = { 11, 10, 8, 9, 12, 15, 13, 14 },
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS2] = { 17, 23, 19, 16, 21, 22, 20, 18 },
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS3] = { 31, 29, 26, 25, 28, 27, 24, 30 },
+	},
+	.phys[LP4_PHYS_CH1B] = {
+		/* DQA[0:7] pins of LPDDR4 module. */
+		.dqs[LP4_DQS0] = { 4, 3, 7, 5, 6, 1, 0, 2 },
+		/* DQA[8:15] pins of LPDDR4 module. */
+		.dqs[LP4_DQS1] = { 15, 9, 8, 11, 14, 13, 12, 10 },
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS2] = { 20, 23, 22, 21, 18, 19, 16, 17 },
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS3] = { 25, 28, 30, 31, 26, 27, 24, 29 },
+	},
+};
+
+static const struct lpddr4_sku skus[] = {
+	/*
+	 * K4F6E304HB-MGCJ - both logical channels While the parts
+	 * are listed at 16Gb there are 2 ranks per channel so indicate
+	 * the density as 8Gb per rank.
+	 */
+	[0] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.ch0_dual_rank = 1,
+		.ch1_dual_rank = 1,
+		.part_num = "K4F6E304HB-MGCJ",
+	},
+	/* K4F8E304HB-MGCJ - both logical channels  */
+	[1] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.part_num = "K4F8E304HB-MGCJ",
+	},
+	/*
+	 * MT53B512M32D2NP-062WT:C - both logical channels. While the parts
+	 * are listed at 16Gb there are 2 ranks per channel so indicate
+	 * the density as 8Gb per rank.
+	 */
+	[2] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.ch0_dual_rank = 1,
+		.ch1_dual_rank = 1,
+		.part_num = "MT53B512M32D2NP",
+		.disable_periodic_retraining = 1,
+	},
+	/* MT53B256M32D1NP-062 WT:C - both logical channels */
+	[3] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.part_num = "MT53B256M32D1NP",
+		.disable_periodic_retraining = 1,
+	},
+	/*
+	 * H9HCNNNBPUMLHR-NLE - both logical channels. While the parts
+	 * are listed at 16Gb there are 2 ranks per channel so indicate the
+	 * density as 8Gb per rank.
+	 */
+	[4] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.ch0_dual_rank = 1,
+		.ch1_dual_rank = 1,
+		.part_num = "H9HCNNNBPUMLHR",
+	},
+	/* H9HCNNN8KUMLHR-NLE - both logical channels */
+	[5] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.part_num = "H9HCNNN8KUMLHR",
+	},
+};
+
+static const struct lpddr4_cfg lp4cfg = {
+	.skus = skus,
+	.num_skus = ARRAY_SIZE(skus),
+	.swizzle_config = &baseboard_lpddr4_swizzle,
+};
+
+const struct lpddr4_cfg * __weak variant_lpddr4_config(void)
+{
+	return &lp4cfg;
+}
+
+size_t __weak variant_memory_sku(void)
+{
+	return 0;
+}
diff --git a/src/mainboard/microtech/etabpro/romstage.c b/src/mainboard/microtech/etabpro/romstage.c
new file mode 100644
index 0000000..2c42ee6
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/romstage.c
@@ -0,0 +1,238 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include "variants.h"
+#include <string.h>
+#include <soc/meminit.h>
+#include <soc/romstage.h>
+
+#define BOARD_ID_GLK_RVP1_DDR4	0x5 /* GLK RVP1 - DDR4 */
+#define BOARD_ID_GLK_RVP2_LP4SD	0x7 /* GLK RVP2 - LP4 Solder Down */
+#define BOARD_ID_GLK_RVP2_LP4	0x8 /* RVP2 - LP4 Socket */
+
+/* DDR4 specific swizzling data start */
+
+/* Channel 0 PHY 0 to DUnit DQ mapping */
+static const uint8_t swizzling_ch0_ddr4[] = {
+	15, 14, 10, 11,  8,  9, 13, 12,  2,  7,  3,  6,  4,  0,  1,  5,
+	29, 31, 27, 26, 24, 28, 25, 30, 19, 22, 18, 21, 23, 16, 17, 20,
+};
+
+/* Channel 1 PHY 0 to DUnit DQ mapping */
+static const uint8_t swizzling_ch1_ddr4[] = {
+	 1,  0,  4,  5,  7,  2,  6,  3, 24, 25, 28, 30, 26, 27, 31, 29,
+	21, 20, 17, 16, 23, 22, 19, 18,  8, 12, 11, 15, 10,  9, 13, 14,
+};
+
+/* Channel 1 PHY 1 to DUnit DQ mapping */
+static const uint8_t swizzling_ch2_ddr4[] = {
+	14, 12,  9, 13, 10, 15, 11,  8,  1,  3,  7,  5,  2,  6,  0,  4,
+	27, 24, 29, 28, 30, 26, 31, 25, 19, 20, 18, 22, 16, 21, 23, 17,
+};
+
+/* Channel 0 PHY 1 to DUnit DQ mapping */
+static const uint8_t swizzling_ch3_ddr4[] = {
+	12,  8, 13,  9, 15, 11, 14, 10,  0,  5,  1,  4,  7,  2,  6,  3,
+	20, 16, 21, 17, 19, 18, 22, 23, 29, 24, 28, 26, 25, 30, 31, 27
+};
+/* DDR4 specific swizzling data end*/
+
+/* LPDD4 specific swizzling data start */
+
+/* Channel 0 PHY 0 to DUnit DQ mapping */
+static const uint8_t swizzling_ch0_lpddr4[] = {
+	10, 8, 12, 11,  9,  13, 14, 15,  1,  3,  2,  0,  5,  4,  6,  7,
+	30, 26, 24, 25, 28, 29, 31, 27, 20, 21, 22, 16, 23, 17, 18, 19,
+};
+
+/* Channel 1 PHY 0 to DUnit DQ mapping */
+static const uint8_t swizzling_ch1_lpddr4[] = {
+	0, 6,  7, 5, 3, 2, 1,  4,  12,  15,  13,  8,  9,  10,  11,  14,
+	17, 18, 19, 16, 23, 20, 21, 22, 30, 31, 25, 27, 26, 29, 28, 24,
+};
+
+/* Channel 1 PHY 1 to DUnit DQ mapping */
+static const uint8_t swizzling_ch2_lpddr4[] = {
+	15, 8,  11, 10, 14, 12, 13,  9,  5,  1,  0,  6,  2,  3,  7,  4,
+	31, 25, 24, 27, 30, 29, 28, 26, 21, 18, 20, 23, 16, 17, 22, 19,
+};
+
+/* Channel 0 PHY 1 to DUnit DQ mapping */
+static const uint8_t swizzling_ch3_lpddr4[] = {
+	15,  9, 8,  10, 13, 14, 12, 11,  7,  6,  5,  0,  4,  2,  1,  3,
+	20, 21, 23, 22, 19, 17, 18, 16, 24, 27, 26, 30, 25, 31, 28, 29
+};
+/* LPDD4 specific swizzling data end */
+
+static void fill_lpddr4_params(FSP_M_CONFIG *cfg)
+{
+	cfg->Package = 1;
+	cfg->MemoryDown = 1;
+	cfg->DDR3LPageSize = 0;
+	cfg->DDR3LASR = 0;
+	cfg->ScramblerSupport = 1;
+	cfg->ChannelHashMask = 0x36;
+	cfg->SliceHashMask = 0x9;
+	cfg->InterleavedMode = 2;
+	cfg->ChannelsSlicesEnable = 0;
+	cfg->MinRefRate2xEnable = 0;
+	cfg->DualRankSupportEnable = 0;
+	cfg->DisableFastBoot = 0;
+	cfg->RmtMode = 0;
+	cfg->RmtCheckRun = 0;
+	cfg->RmtMarginCheckScaleHighThreshold = 0;
+	cfg->MemorySizeLimit = 0;
+	cfg->LowMemoryMaxValue = 0;
+	cfg->HighMemoryMaxValue = 0;
+	cfg->Profile = 7;
+	cfg->DIMM0SPDAddress = 0x00;
+	cfg->DIMM1SPDAddress = 0x00;
+	cfg->Ch0_RankEnable = 0x1;
+	cfg->Ch0_DeviceWidth = 0x1;
+	cfg->Ch0_DramDensity = 0x2;
+	cfg->Ch0_Option = 0x3;
+	cfg->Ch0_TristateClk1 = 0;
+	cfg->Ch0_Mode2N = 0;
+	cfg->Ch0_OdtLevels = 0;
+	cfg->Ch1_RankEnable = 0x1;
+	cfg->Ch1_DeviceWidth = 0x1;
+	cfg->Ch1_DramDensity = 0x2;
+	cfg->Ch1_Option = 0x3;
+	cfg->Ch1_TristateClk1 = 0;
+	cfg->Ch1_Mode2N = 0;
+	cfg->Ch1_OdtLevels = 0;
+	cfg->Ch2_RankEnable = 0x1;
+	cfg->Ch2_DeviceWidth = 0x1;
+	cfg->Ch2_DramDensity = 0x2;
+	cfg->Ch2_Option = 0x3;
+	cfg->Ch2_TristateClk1 = 0;
+	cfg->Ch2_Mode2N = 0;
+	cfg->Ch2_OdtLevels = 0;
+	cfg->Ch3_RankEnable = 0x1;
+	cfg->Ch3_DeviceWidth = 0x1;
+	cfg->Ch3_DramDensity = 0x2;
+	cfg->Ch3_Option = 0x3;
+	cfg->Ch3_TristateClk1 = 0;
+	cfg->Ch3_Mode2N = 0;
+	cfg->Ch3_OdtLevels = 0;
+	/* phy0 ch0 */
+	memcpy(cfg->Ch0_Bit_swizzling, swizzling_ch0_lpddr4,
+		sizeof(swizzling_ch0_lpddr4));
+	/* phy0 ch1 */
+	memcpy(cfg->Ch1_Bit_swizzling, swizzling_ch1_lpddr4,
+		sizeof(swizzling_ch1_lpddr4));
+	/* phy1 ch1 */
+	memcpy(cfg->Ch2_Bit_swizzling, swizzling_ch2_lpddr4,
+		sizeof(swizzling_ch2_lpddr4));
+	/* phy1 ch0 */
+	memcpy(cfg->Ch3_Bit_swizzling, swizzling_ch3_lpddr4,
+		sizeof(swizzling_ch3_lpddr4));
+}
+
+static void fill_ddr4_params(FSP_M_CONFIG *cfg)
+{
+	cfg->Package = 0;		/* 0x1:BGA */
+	cfg->MemoryDown = 0;
+	cfg->DDR3LPageSize = 1;
+	cfg->DDR3LASR = 0;
+	cfg->ScramblerSupport = 0;
+	cfg->ChannelHashMask = 0x36;
+	cfg->SliceHashMask = 0x9;
+	cfg->InterleavedMode = 0;
+	cfg->ChannelsSlicesEnable = 0;
+	cfg->MinRefRate2xEnable = 0;
+	cfg->DualRankSupportEnable = 1;
+	cfg->DisableFastBoot = 0;
+	cfg->RmtMode = 0;
+	cfg->RmtCheckRun = 0;
+	cfg->RmtMarginCheckScaleHighThreshold = 0;
+	cfg->MemorySizeLimit = 0;
+	cfg->LowMemoryMaxValue = 0;
+	cfg->HighMemoryMaxValue = 0;
+	cfg->Profile = 11;
+	cfg->DIMM0SPDAddress = 0xA0;
+	cfg->DIMM1SPDAddress = 0xA4;
+	cfg->Ch0_RankEnable = 0x3;
+	cfg->Ch0_DeviceWidth = 0x1;
+	cfg->Ch0_DramDensity = 0x0;
+	cfg->Ch0_Option = 0x3;		/* Bank Address Hashing enabled */
+	cfg->Ch0_TristateClk1 = 0;
+	cfg->Ch0_Mode2N = 0;
+	cfg->Ch0_OdtLevels = 0;
+	cfg->Ch1_RankEnable = 0x3;
+	cfg->Ch1_DeviceWidth = 0x1;
+	cfg->Ch1_DramDensity = 0x2;
+	cfg->Ch1_Option = 0x3;		/* Bank Address Hashing enabled */
+	cfg->Ch1_TristateClk1 = 0;
+	cfg->Ch1_Mode2N = 0;
+	cfg->Ch1_OdtLevels = 0;
+	cfg->Ch2_RankEnable = 0x0;
+	cfg->Ch2_DeviceWidth = 0x1;
+	cfg->Ch2_DramDensity = 0x2;
+	cfg->Ch2_Option = 0x3;		/* Bank Address Hashing enabled */
+	cfg->Ch2_TristateClk1 = 0;
+	cfg->Ch2_Mode2N = 0;
+	cfg->Ch2_OdtLevels = 0;
+	cfg->Ch3_RankEnable = 0x0;
+	cfg->Ch3_DeviceWidth = 0x1;
+	cfg->Ch3_DramDensity = 0x2;
+	cfg->Ch3_Option = 0x3;		/* Bank Address Hashing enabled */
+	cfg->Ch3_TristateClk1 = 0;
+	cfg->Ch3_Mode2N = 0;
+	cfg->Ch3_OdtLevels = 0;
+
+	/* phy0 ch0 */
+	memcpy(cfg->Ch0_Bit_swizzling, swizzling_ch0_ddr4,
+		sizeof(swizzling_ch0_ddr4));
+	/* phy0 ch1 */
+	memcpy(cfg->Ch1_Bit_swizzling, swizzling_ch1_ddr4,
+		sizeof(swizzling_ch1_ddr4));
+	/* phy1 ch1 */
+	memcpy(cfg->Ch2_Bit_swizzling, swizzling_ch2_ddr4,
+		sizeof(swizzling_ch2_ddr4));
+	/* phy1 ch0 */
+	memcpy(cfg->Ch3_Bit_swizzling, swizzling_ch3_ddr4,
+		sizeof(swizzling_ch3_ddr4));
+}
+
+static void fill_memory_params(FSP_M_CONFIG *cfg)
+{
+	uint8_t boardid;
+
+	if (CONFIG(IS_GLK_RVP_1))
+		boardid = BOARD_ID_GLK_RVP1_DDR4;
+	else
+		boardid = BOARD_ID_GLK_RVP2_LP4;
+
+	switch (boardid) {
+	case BOARD_ID_GLK_RVP1_DDR4:
+		fill_ddr4_params(cfg);
+		break;
+	case BOARD_ID_GLK_RVP2_LP4SD:
+	case BOARD_ID_GLK_RVP2_LP4:
+		fill_lpddr4_params(cfg);
+		break;
+	}
+}
+
+void mainboard_memory_init_params(FSPM_UPD *memupd)
+{
+	FSP_M_CONFIG *cfg = &memupd->FspmConfig;
+	fill_memory_params(cfg);
+}
+
+void mainboard_save_dimm_info(void)
+{
+	save_lpddr4_dimm_info(variant_lpddr4_config(), variant_memory_sku());
+}
diff --git a/src/mainboard/microtech/etabpro/touchpad.asl b/src/mainboard/microtech/etabpro/touchpad.asl
new file mode 100644
index 0000000..6168fbb
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/touchpad.asl
@@ -0,0 +1,76 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+	Scope (_SB.PCI0.I2C4)
+	{
+		Device (TPAD)
+		{
+		Name(_ADR, One)
+		Name (_HID, "ALPS0001")
+		Name (_CID, "PNP0C50")
+		Name (_DDN, "ALPS Touchpad")
+		Name (_UID, 1)
+		Name (ISTP, 1) /* Touchpad */
+		Name (_CRS, ResourceTemplate()
+		{
+			I2cSerialBus (
+				0x2C,                     // SlaveAddress
+				ControllerInitiated,      // SlaveMode
+				400000,                   // ConnectionSpeed
+				AddressingMode7Bit,       // AddressingMode
+				"\_SB.PCI0.I2C4",        // ResourceSource
+			)
+			Interrupt (ResourceConsumer, Level, ActiveLow)
+			{
+				GPIO_18_IRQ
+			}
+			GpioInt (Level, ActiveLow, ExclusiveAndWake, PullUp, 0x0000, "\_SB.GPO1", 0x00, ResourceConsumer, ,)
+			{
+				18
+			}
+		})
+
+		Method (_STA)
+		{
+				Return (0xF)
+		}
+		Method(_DSM, 0x4, NotSerialized)
+		{
+		// DSM UUID for HIDI2C - HID driver does not load without DSM
+			If(LEqual(Arg0, ToUUID("3CDFF6F7-4267-4555-AD05-B30A3D8938DE")))
+			{
+				// Function 0 : Query Function
+				If(LEqual(Arg2, Zero))
+				{
+					// Revision 1
+					If(LEqual(Arg1, One))
+					{
+						Return (Buffer (One) {0x03})
+					}
+					Else
+					{
+						Return (Buffer (One) {0x00})
+					}
+				} ElseIf (LEqual(Arg2, One)) {  // Function 1 : HID Function
+			// HID Descriptor Address (IHV Specific)
+					Return(0x0020)
+				} Else {
+					Return (Buffer (One) {0x00})
+				}
+			} Else {
+				Return (Buffer (One) {0x00})
+			}
+		}
+	}
+}
diff --git a/src/mainboard/microtech/etabpro/touchpanel.asl b/src/mainboard/microtech/etabpro/touchpanel.asl
new file mode 100644
index 0000000..225b891
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/touchpanel.asl
@@ -0,0 +1,71 @@
+
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+Scope(_SB.PCI0.I2C7) {
+// Touch Panels on I2C7
+// GPIO_212:TCH_PNL_INTR_LS_N     North Community, IRQ number 0x75.
+//------------------------
+  Device (TPL1) {
+    Name (HID2, 1)
+    Name (_HID, "WCOM508E")  // _HID: Hardware ID
+    Name (_CID, "PNP0C50")  // _CID: Compatible ID
+    Name (_S0W, 0x04)  // _S0W: S0 Device Wake State
+    Name (SBFB, ResourceTemplate () {
+      I2cSerialBus (
+        0x000A,
+        ControllerInitiated,
+        1000000,
+        AddressingMode7Bit,
+        "\_SB.PCI0.I2C7",
+        0x00,
+        ResourceConsumer,
+        ,
+        )
+    })
+    //
+    // GLK: Touchpanel Interrupt: GPIO_212: Northwest
+    // Pin 77
+    // Direct IRQ 0x75
+    //
+    Name (SBFG, ResourceTemplate () {
+      GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000,
+        "\_SB.GPO0", 0x00, ResourceConsumer, ,
+        )
+        {
+            77
+        }
+    })
+    Name (SBFI, ResourceTemplate () {
+      Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, ,, )
+      {
+        0x75,
+      }
+    })
+
+    Method (_INI, 0, NotSerialized)  // _INI: Initialize
+    {
+    }
+
+    Method (_STA, 0, NotSerialized)  // _STA: Status
+    {
+        Return (0x0F)
+    }
+
+    Method (_CRS, 0, NotSerialized) {
+      Return (ConcatenateResTemplate(SBFB, SBFG))
+    }
+  } // Device (TPL0)
+}
diff --git a/src/mainboard/microtech/etabpro/variants.h b/src/mainboard/microtech/etabpro/variants.h
new file mode 100644
index 0000000..cf91a04
--- /dev/null
+++ b/src/mainboard/microtech/etabpro/variants.h
@@ -0,0 +1,51 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef BASEBOARD_VARIANTS_H
+#define BASEBOARD_VARIANTS_H
+
+#include <soc/gpio.h>
+#include <soc/meminit.h>
+#include <stdint.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+
+/**
+ * variant_board_id() - Get the board id for the current board variant
+ *
+ * Return: board id on success, -1 on failure/error.
+ */
+int variant_board_id(void);
+
+/* The next set of functions return the gpio table and fill in the number of
+ * entries for each table. */
+const struct pad_config *variant_gpio_table(size_t *num);
+const struct pad_config *variant_early_gpio_table(size_t *num);
+const struct pad_config *variant_sleep_gpio_table(size_t *num);
+
+/* Baseboard default swizzle. Can be reused if swizzle is same. */
+extern const struct lpddr4_swizzle_cfg baseboard_lpddr4_swizzle;
+/* Return LPDDR4 configuration structure. */
+const struct lpddr4_cfg *variant_lpddr4_config(void);
+/* Return memory SKU for the board. */
+size_t variant_memory_sku(void);
+
+/* Return ChromeOS gpio table and fill in number of entries. */
+const struct cros_gpio *variant_cros_gpios(size_t *num);
+
+/* Seed the NHLT tables with the board specific information. */
+struct nhlt;
+void variant_nhlt_init(struct nhlt *nhlt);
+
+#endif /* BASEBOARD_VARIANTS_H */
-- 
To view, visit https://review.coreboot.org/c/coreboot/+/39277
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings

Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Change-Id: Ib9d755902f28b51823e16c228ee5d4fc13849798
Gerrit-Change-Number: 39277
Gerrit-PatchSet: 1
Gerrit-Owner: Miroslaw Kocur mirek190@gmail.com
Gerrit-MessageType: newchange



    

Change in coreboot[master]: Inicial device tree for Microtech etabpro Platform Intel GLK Tablet w...