Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/29927
Change subject: soc/intel/broadwell: Implement postcar stage ......................................................................
soc/intel/broadwell: Implement postcar stage
This does the following: - Reuse the cpu/intel/car/non-evict CAR setup and exit. - Use postcar_frame functions to set up the postcar frame
Change-Id: I428832a2d7e46ce61a7f9bd498b609feb4518eb0 Signed-off-by: Arthur Heymans arthur@aheymans.xyz --- M src/soc/intel/broadwell/Kconfig M src/soc/intel/broadwell/Makefile.inc M src/soc/intel/broadwell/include/soc/pci_devs.h M src/soc/intel/broadwell/romstage/Makefile.inc D src/soc/intel/broadwell/romstage/cache_as_ram.inc M src/soc/intel/broadwell/romstage/romstage.c D src/soc/intel/broadwell/romstage/stack.c 7 files changed, 42 insertions(+), 426 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/27/29927/1
diff --git a/src/soc/intel/broadwell/Kconfig b/src/soc/intel/broadwell/Kconfig index 18ec51f..e6cbd95 100644 --- a/src/soc/intel/broadwell/Kconfig +++ b/src/soc/intel/broadwell/Kconfig @@ -40,6 +40,8 @@ select HAVE_SPI_CONSOLE_SUPPORT select CPU_INTEL_COMMON select INTEL_GMA_ACPI + select POSTCAR_STAGE + select POSTCAR_CONSOLE
config PCIEXP_ASPM bool diff --git a/src/soc/intel/broadwell/Makefile.inc b/src/soc/intel/broadwell/Makefile.inc index 4e4d3eb..caf963c 100644 --- a/src/soc/intel/broadwell/Makefile.inc +++ b/src/soc/intel/broadwell/Makefile.inc @@ -30,6 +30,7 @@ romstage-y += me_status.c ramstage-y += memmap.c romstage-y += memmap.c +postcar-y += memmap.c ramstage-y += minihd.c ramstage-y += monotonic_timer.c smm-y += monotonic_timer.c @@ -55,6 +56,7 @@ smm-$(CONFIG_SPI_FLASH_SMM) += spi.c ramstage-y += stage_cache.c romstage-y += stage_cache.c +postcar-y += stage_cache.c ramstage-y += systemagent.c ramstage-y += tsc_freq.c romstage-y += tsc_freq.c @@ -65,6 +67,8 @@ ramstage-y += xhci.c smm-y += xhci.c
+postcar-y += ../../../cpu/intel/car/non-evict/exit_car.S + ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/hda_verb.c
cpu_microcode_bins += 3rdparty/blobs/soc/intel/broadwell/microcode.bin diff --git a/src/soc/intel/broadwell/include/soc/pci_devs.h b/src/soc/intel/broadwell/include/soc/pci_devs.h index 0880353..a46f9fc 100644 --- a/src/soc/intel/broadwell/include/soc/pci_devs.h +++ b/src/soc/intel/broadwell/include/soc/pci_devs.h @@ -19,7 +19,7 @@ #define _SA_DEVFN(slot) PCI_DEVFN(SA_DEV_SLOT_ ## slot, 0) #define _PCH_DEVFN(slot, func) PCI_DEVFN(PCH_DEV_SLOT_ ## slot, func)
-#if defined(__PRE_RAM__) || defined(__SMM__) || defined(__ROMCC__) +#if defined(__SIMPLE_DEVICE__) #include <arch/io.h> #define _SA_DEV(slot) PCI_DEV(0, SA_DEV_SLOT_ ## slot, 0) #define _PCH_DEV(slot, func) PCI_DEV(0, PCH_DEV_SLOT_ ## slot, func) diff --git a/src/soc/intel/broadwell/romstage/Makefile.inc b/src/soc/intel/broadwell/romstage/Makefile.inc index 1617812..2d562d9 100644 --- a/src/soc/intel/broadwell/romstage/Makefile.inc +++ b/src/soc/intel/broadwell/romstage/Makefile.inc @@ -1,4 +1,4 @@ -cpu_incs-y += $(src)/soc/intel/broadwell/romstage/cache_as_ram.inc +cpu_incs-y += $(src)/cpu/intel/car/non-evict/cache_as_ram.S
romstage-y += cpu.c romstage-y += pch.c @@ -8,6 +8,5 @@ romstage-y += romstage.c romstage-y += smbus.c romstage-y += spi.c -romstage-y += stack.c romstage-y += systemagent.c romstage-$(CONFIG_DRIVERS_UART_8250MEM) += uart.c diff --git a/src/soc/intel/broadwell/romstage/cache_as_ram.inc b/src/soc/intel/broadwell/romstage/cache_as_ram.inc deleted file mode 100644 index 6d3d6dd..0000000 --- a/src/soc/intel/broadwell/romstage/cache_as_ram.inc +++ /dev/null @@ -1,318 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000,2007 Ronald G. Minnich rminnich@gmail.com - * Copyright (C) 2007-2008 coresystems GmbH - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <cpu/x86/mtrr.h> -#include <cpu/x86/cache.h> -#include <cpu/x86/post_code.h> - -/* The full cache-as-ram size includes the cache-as-ram portion from coreboot - * and the space used by the reference code. These 2 values combined should - * be a power of 2 because the MTRR setup assumes that. */ -#define CACHE_AS_RAM_SIZE \ - (CONFIG_DCACHE_RAM_SIZE + CONFIG_DCACHE_RAM_MRC_VAR_SIZE) -#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE -#define CACHE_AS_RAM_LIMIT (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE) - -/* Cache 4GB - MRC_SIZE_KB for MRC */ -#define CACHE_MRC_BYTES ((CONFIG_CACHE_MRC_SIZE_KB << 10) - 1) -#define CACHE_MRC_BASE (0xFFFFFFFF - CACHE_MRC_BYTES) -#define CACHE_MRC_MASK (~CACHE_MRC_BYTES) - -#define CPU_MAXPHYSADDR CONFIG_CPU_ADDR_BITS -#define CPU_PHYSMASK_HI (1 << (CPU_MAXPHYSADDR - 32) - 1) - -#define NoEvictMod_MSR 0x2e0 - - /* Save the BIST result. */ - movl %eax, %ebp - -cache_as_ram: - post_code(0x20) - - /* Send INIT IPI to all excluding ourself. */ - movl $0x000C4500, %eax - movl $0xFEE00300, %esi - movl %eax, (%esi) - - /* All CPUs need to be in Wait for SIPI state */ -wait_for_sipi: - movl (%esi), %eax - bt $12, %eax - jc wait_for_sipi - - post_code(0x21) - /* Zero out all fixed range and variable range MTRRs. */ - movl $mtrr_table, %esi - movl $((mtrr_table_end - mtrr_table) >> 1), %edi - xorl %eax, %eax - xorl %edx, %edx -clear_mtrrs: - movw (%esi), %bx - movzx %bx, %ecx - wrmsr - add $2, %esi - dec %edi - jnz clear_mtrrs - - post_code(0x22) - /* Configure the default memory type to uncacheable. */ - movl $MTRR_DEF_TYPE_MSR, %ecx - rdmsr - andl $(~0x00000cff), %eax - wrmsr - - post_code(0x23) - /* Set Cache-as-RAM base address. */ - movl $(MTRR_PHYS_BASE(0)), %ecx - movl $(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax - xorl %edx, %edx - wrmsr - - post_code(0x24) - /* Set Cache-as-RAM mask. */ - movl $(MTRR_PHYS_MASK(0)), %ecx - movl $(~(CACHE_AS_RAM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax - movl $CPU_PHYSMASK_HI, %edx - wrmsr - - post_code(0x25) - - /* Enable MTRR. */ - movl $MTRR_DEF_TYPE_MSR, %ecx - rdmsr - orl $MTRR_DEF_TYPE_EN, %eax - wrmsr - - /* Enable cache (CR0.CD = 0, CR0.NW = 0). */ - movl %cr0, %eax - andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax - invd - movl %eax, %cr0 - - /* enable the 'no eviction' mode */ - movl $NoEvictMod_MSR, %ecx - rdmsr - orl $1, %eax - andl $~2, %eax - wrmsr - - /* Clear the cache memory region. This will also fill up the cache */ - movl $CACHE_AS_RAM_BASE, %esi - movl %esi, %edi - movl $(CACHE_AS_RAM_SIZE >> 2), %ecx - xorl %eax, %eax - rep stosl - - /* enable the 'no eviction run' state */ - movl $NoEvictMod_MSR, %ecx - rdmsr - orl $3, %eax - wrmsr - - post_code(0x26) - /* Enable Cache-as-RAM mode by disabling cache. */ - movl %cr0, %eax - orl $CR0_CacheDisable, %eax - movl %eax, %cr0 - - /* Enable cache for our code in Flash because we do XIP here */ - movl $MTRR_PHYS_BASE(1), %ecx - xorl %edx, %edx - /* - * IMPORTANT: The following calculation _must_ be done at runtime. See - * https://mail.coreboot.org/pipermail/coreboot/2010-October/060922.html - */ - movl $_program, %eax - andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax - orl $MTRR_TYPE_WRPROT, %eax - wrmsr - - movl $MTRR_PHYS_MASK(1), %ecx - movl $CPU_PHYSMASK_HI, %edx - movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax - wrmsr - - post_code(0x27) - /* Enable caching for RAM init code to run faster */ - movl $MTRR_PHYS_BASE(2), %ecx - movl $(CACHE_MRC_BASE | MTRR_TYPE_WRPROT), %eax - xorl %edx, %edx - wrmsr - movl $MTRR_PHYS_MASK(2), %ecx - movl $(CACHE_MRC_MASK | MTRR_PHYS_MASK_VALID), %eax - movl $CPU_PHYSMASK_HI, %edx - wrmsr - - post_code(0x28) - /* Enable cache. */ - movl %cr0, %eax - andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax - movl %eax, %cr0 - - /* Setup the stack. */ - movl $(CACHE_AS_RAM_LIMIT), %eax - movl %eax, %esp - - /* Restore the BIST result. */ - movl %ebp, %eax - - /* Build the call frame. */ - movl %esp, %ebp - movd %mm1, %ebx - pushl %ebx - movd %mm0, %ebx - pushl %ebx - pushl %eax - -before_romstage: - post_code(0x29) - /* Call romstage.c main function. */ - call romstage_main - /* Save return value from romstage_main. It contains the stack to use - * after cache-as-ram is torn down. It also contains the information - * for setting up MTRRs. */ - movl %eax, %ebx - - post_code(0x2f) - - post_code(0x30) - - /* Disable cache. */ - movl %cr0, %eax - orl $CR0_CacheDisable, %eax - movl %eax, %cr0 - - post_code(0x31) - - /* Disable MTRR. */ - movl $MTRR_DEF_TYPE_MSR, %ecx - rdmsr - andl $(~MTRR_DEF_TYPE_EN), %eax - wrmsr - - post_code(0x31) - - /* Disable the no eviction run state */ - movl $NoEvictMod_MSR, %ecx - rdmsr - andl $~2, %eax - wrmsr - - invd - - /* Disable the no eviction mode */ - rdmsr - andl $~1, %eax - wrmsr - - /* Clear MTRR that was used to cache MRC */ - xorl %eax, %eax - xorl %edx, %edx - movl $MTRR_PHYS_BASE(2), %ecx - wrmsr - movl $MTRR_PHYS_MASK(2), %ecx - wrmsr - - post_code(0x33) - - /* Enable cache. */ - movl %cr0, %eax - andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax - movl %eax, %cr0 - - post_code(0x36) - - /* Disable cache. */ - movl %cr0, %eax - orl $CR0_CacheDisable, %eax - movl %eax, %cr0 - - post_code(0x38) - - /* Setup stack as indicated by return value from romstage_main(). */ - movl %ebx, %esp - - /* Get number of MTRRs. */ - popl %ebx - movl $MTRR_PHYS_BASE(0), %ecx -1: - testl %ebx, %ebx - jz 1f - - /* Low 32 bits of MTRR base. */ - popl %eax - /* Upper 32 bits of MTRR base. */ - popl %edx - /* Write MTRR base. */ - wrmsr - inc %ecx - /* Low 32 bits of MTRR mask. */ - popl %eax - /* Upper 32 bits of MTRR mask. */ - popl %edx - /* Write MTRR mask. */ - wrmsr - inc %ecx - - dec %ebx - jmp 1b -1: - post_code(0x39) - - /* And enable cache again after setting MTRRs. */ - movl %cr0, %eax - andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax - movl %eax, %cr0 - - post_code(0x3a) - - /* Enable MTRR. */ - movl $MTRR_DEF_TYPE_MSR, %ecx - rdmsr - orl $MTRR_DEF_TYPE_EN, %eax - wrmsr - - post_code(0x3b) - - /* Invalidate the cache again. */ - invd - - post_code(0x3c) - -__main: - post_code(POST_PREPARE_RAMSTAGE) - cld /* Clear direction flag. */ - call romstage_after_car - -.Lhlt: - post_code(POST_DEAD_CODE) - hlt - jmp .Lhlt - -mtrr_table: - /* Fixed MTRRs */ - .word 0x250, 0x258, 0x259 - .word 0x268, 0x269, 0x26A - .word 0x26B, 0x26C, 0x26D - .word 0x26E, 0x26F - /* Variable MTRRs */ - .word 0x200, 0x201, 0x202, 0x203 - .word 0x204, 0x205, 0x206, 0x207 - .word 0x208, 0x209, 0x20A, 0x20B - .word 0x20C, 0x20D, 0x20E, 0x20F - .word 0x210, 0x211, 0x212, 0x213 -mtrr_table_end: diff --git a/src/soc/intel/broadwell/romstage/romstage.c b/src/soc/intel/broadwell/romstage/romstage.c index 7a796f4..1e92521 100644 --- a/src/soc/intel/broadwell/romstage/romstage.c +++ b/src/soc/intel/broadwell/romstage/romstage.c @@ -19,6 +19,7 @@ #include <arch/cbfs.h> #include <arch/early_variables.h> #include <bootmode.h> +#include <cbmem.h> #include <console/console.h> #include <cpu/x86/mtrr.h> #include <elog.h> @@ -32,6 +33,36 @@ #include <soc/romstage.h> #include <soc/spi.h>
+#define ROMSTAGE_RAM_STACK_SIZE 0x5000 + +/* platform_enter_postcar() determines the stack to use after + * cache-as-ram is torn down as well as the MTRR settings to use, + * and continues execution in postcar stage. */ +static void platform_enter_postcar(void) +{ + struct postcar_frame pcf; + uintptr_t top_of_ram; + + if (postcar_frame_init(&pcf, ROMSTAGE_RAM_STACK_SIZE)) + die("Unable to initialize postcar frame.\n"); + /* Cache the ROM as WP just below 4GiB. */ + postcar_frame_add_mtrr(&pcf, CACHE_ROM_BASE, CACHE_ROM_SIZE, + MTRR_TYPE_WRPROT); + + /* Cache RAM as WB from 0 -> CACHE_TMP_RAMTOP. */ + postcar_frame_add_mtrr(&pcf, 0, CACHE_TMP_RAMTOP, MTRR_TYPE_WRBACK); + + /* Cache at least 8 MiB below the top of ram, and at most 8 MiB + * above top of the ram. This satisfies MTRR alignment requirement + * with different TSEG size configurations. + */ + top_of_ram = ALIGN_DOWN((uintptr_t)cbmem_top(), 8*MiB); + postcar_frame_add_mtrr(&pcf, top_of_ram - 8*MiB, 16*MiB, + MTRR_TYPE_WRBACK); + + run_postcar_phase(&pcf); +} + /* Entry from cache-as-ram.inc. */ asmlinkage void *romstage_main(unsigned long bist, uint32_t tsc_low, uint32_t tsc_hi) @@ -74,7 +105,9 @@ /* Call into mainboard. */ mainboard_romstage_entry(&rp);
- return setup_stack_and_mtrrs(); + platform_enter_postcar(); + + return NULL; }
/* Entry from the mainboard. */ diff --git a/src/soc/intel/broadwell/romstage/stack.c b/src/soc/intel/broadwell/romstage/stack.c deleted file mode 100644 index 3595676..0000000 --- a/src/soc/intel/broadwell/romstage/stack.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stddef.h> -#include <stdint.h> -#include <arch/cpu.h> -#include <arch/early_variables.h> -#include <cbmem.h> -#include <cpu/x86/mtrr.h> -#include <soc/romstage.h> -#include <program_loading.h> - -static inline uint32_t *stack_push(u32 *stack, u32 value) -{ - stack = &stack[-1]; - *stack = value; - return stack; -} - -/* setup_stack_and_mtrrs() determines the stack to use after - * cache-as-ram is torn down as well as the MTRR settings to use. */ -void *setup_stack_and_mtrrs(void) -{ - int num_mtrrs; - uint32_t *slot; - uint32_t mtrr_mask_upper; - uint32_t top_of_ram; - - /* Top of stack needs to be aligned to a 4-byte boundary. */ - slot = (void *)romstage_ram_stack_top(); - num_mtrrs = 0; - - /* The upper bits of the MTRR mask need to set according to the number - * of physical address bits. */ - mtrr_mask_upper = (1 << ((cpuid_eax(0x80000008) & 0xff) - 32)) - 1; - - /* The order for each MTRR is value then base with upper 32-bits of - * each value coming before the lower 32-bits. The reasoning for - * this ordering is to create a stack layout like the following: - * +0: Number of MTRRs - * +4: MTRR base 0 31:0 - * +8: MTRR base 0 63:32 - * +12: MTRR mask 0 31:0 - * +16: MTRR mask 0 63:32 - * +20: MTRR base 1 31:0 - * +24: MTRR base 1 63:32 - * +28: MTRR mask 1 31:0 - * +32: MTRR mask 1 63:32 - */ - - /* Cache the ROM as WP just below 4GiB. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, ~(CONFIG_ROM_SIZE - 1) | MTRR_TYPE_WRPROT); - num_mtrrs++; - - /* Cache RAM as WB from 0 -> CACHE_TMP_RAMTOP. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~(CACHE_TMP_RAMTOP - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, 0 | MTRR_TYPE_WRBACK); - num_mtrrs++; - - top_of_ram = (uint32_t)cbmem_top(); - /* Cache 8MiB below the top of ram. The top of RAM under 4GiB is the - * start of the TSEG region. It is required to be 8MiB aligned. Set - * this area as cacheable so it can be used later for ramstage before - * setting up the entire RAM as cacheable. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~((8 << 20) - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, (top_of_ram - (8 << 20)) | MTRR_TYPE_WRBACK); - num_mtrrs++; - - /* Cache 8MiB at the top of ram. Top of RAM is where the TSEG - * region resides. However, it is not restricted to SMM mode until - * SMM has been relocated. By setting the region to cacheable it - * provides faster access when relocating the SMM handler as well - * as using the TSEG region for other purposes. */ - slot = stack_push(slot, mtrr_mask_upper); /* upper mask */ - slot = stack_push(slot, ~((8 << 20) - 1) | MTRR_PHYS_MASK_VALID); - slot = stack_push(slot, 0); /* upper base */ - slot = stack_push(slot, top_of_ram | MTRR_TYPE_WRBACK); - num_mtrrs++; - - /* Save the number of MTRRs to setup. Return the stack location - * pointing to the number of MTRRs. */ - slot = stack_push(slot, num_mtrrs); - - return slot; -}
-
Arthur Heymans (Code Review)