Change in coreboot[master]: mb/google/guybrush: Remove the GPIO_SIGN_OF_LIFE code

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/52740 )

Change subject: mb/google/guybrush: Remove the GPIO_SIGN_OF_LIFE code
......................................................................

mb/google/guybrush: Remove the GPIO_SIGN_OF_LIFE code

Guybrush is pretty definitely alive, so this can be removed, as the
TODO line said.

BUG=180721202
TEST=Build

Signed-off-by: Martin Roth 
Change-Id: I14f89f3e6f780c2da2136a838950ef2bcebc4c3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52740
Tested-by: build bot (Jenkins) 
Reviewed-by: Raul Rangel 
---
M src/mainboard/google/guybrush/Kconfig
M src/mainboard/google/guybrush/bootblock.c
2 files changed, 0 insertions(+), 19 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Raul Rangel: Looks good to me, approved

diff --git a/src/mainboard/google/guybrush/Kconfig b/src/mainboard/google/guybrush/Kconfig
index 8f160fa..51ac55d 100644
--- a/src/mainboard/google/guybrush/Kconfig
+++ b/src/mainboard/google/guybrush/Kconfig
@@ -96,11 +96,4 @@
    string
    default "Google_Guybrush"

-config GPIO_SIGN_OF_LIFE
-	def_bool n
-	help
-	  Enable toggling GPIO 31 as a sign of life on Guybrush
-
-	  TODO: Remove this option when board is booting
-
 endif # BOARD_GOOGLE_BASEBOARD_GUYBRUSH
diff --git a/src/mainboard/google/guybrush/bootblock.c b/src/mainboard/google/guybrush/bootblock.c
index ece1201..5b18d37 100644
--- a/src/mainboard/google/guybrush/bootblock.c
+++ b/src/mainboard/google/guybrush/bootblock.c
@@ -5,9 +5,6 @@
 #include <baseboard/variants.h>
 #include <console/console.h>
 #include <device/pci_ops.h>
-#include <delay.h>
-#include <gpio.h>
-#include <soc/gpio.h>
 #include <soc/pci_devs.h>

void bootblock_mainboard_early_init(void)
@@ -38,15 +35,6 @@
    dword |= 3 << 10;
    pm_write32(0x74, dword);

-	if (CONFIG(GPIO_SIGN_OF_LIFE)) {
-		for (int x = 0; x < 20; x++) {
-			gpio_set(GPIO_31, 1);
-			mdelay(10);
-			gpio_set(GPIO_31, 0);
-			mdelay(10);
-		}
-	}
-
    if (variant_has_fpmcu())
    	variant_fpmcu_reset();
 }