coreboot-gerrit July 2022

coreboot-gerrit@coreboot.org

673 discussions

Change in coreboot[master]: sb/intel/lynxpoint/acpi: Update xHCI workarounds for LPT
by Angel Pons (Code Review) 17 Aug '23

17 Aug '23

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/46960 ) Change subject: sb/intel/lynxpoint/acpi: Update xHCI workarounds for LPT ...................................................................... sb/intel/lynxpoint/acpi: Update xHCI workarounds for LPT Backport commit cf544ac (broadwell: Remove XHCI workarounds on WPT). Newer Lynxpoint reference code shows LPT-H also uses these workarounds. Also, add the `ISWP` object (Name or Method) to test for WildcatPoint. Change-Id: I76bc07e585e8af292c7316442760d1cfabf1e9c9 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/southbridge/intel/lynxpoint/acpi/pch.asl M src/southbridge/intel/lynxpoint/acpi/xhci.asl 2 files changed, 77 insertions(+), 22 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/60/46960/1 diff --git a/src/southbridge/intel/lynxpoint/acpi/pch.asl b/src/southbridge/intel/lynxpoint/acpi/pch.asl index a878dc2..134a7cf 100644 --- a/src/southbridge/intel/lynxpoint/acpi/pch.asl +++ b/src/southbridge/intel/lynxpoint/acpi/pch.asl @@ -27,6 +27,25 @@ , 5, HPTE, 1, // Address Enable } + + /* + * Check PCH type + * Return 1 if PCH is WildcatPoint + * Return 0 if PCH is LynxPoint + */ +#if CONFIG(INTEL_LYNXPOINT_LP) + Method (ISWP) + { + Local0 = \_SB.PCI0.LPCB.PDID & 0xfff0 + If (Local0 == 0x9cc0) { + Return (1) + } Else { + Return (0) + } + } +#else + Name (ISWP, 0) +#endif } // High Definition Audio (Azalia) 0:1b.0 diff --git a/src/southbridge/intel/lynxpoint/acpi/xhci.asl b/src/southbridge/intel/lynxpoint/acpi/xhci.asl index 2b3d433..203ee3b 100644 --- a/src/southbridge/intel/lynxpoint/acpi/xhci.asl +++ b/src/southbridge/intel/lynxpoint/acpi/xhci.asl @@ -17,6 +17,14 @@ Offset (0x10), , 16, XMEM, 16, // MEM_BASE + Offset (0x40), + , 11, + SWAI, 1, + , 20, + Offset (0x44), + , 12, + SAIP, 2, + , 18, Offset (0x74), D0D3, 2, , 6, @@ -214,25 +222,39 @@ } #if CONFIG(INTEL_LYNXPOINT_LP) - // Clear PCI 0xB0[14:13] - ^MB13 = 0 - ^MB14 = 0 + If (!\ISWP()) { + // Clear PCI 0xB0[14:13] + ^MB13 = 0 + ^MB14 = 0 - // Clear MMIO 0x816C[14,2] - CLK0 = 0 - CLK1 = 0 + // Clear MMIO 0x816C[14,2] + CLK0 = 0 + CLK1 = 0 - // Set MMIO 0x8154[31] - CLK2 = 1 + // Set MMIO 0x8154[31] + CLK2 = 1 - // Handle per-port reset if needed - LPS0 () + // Handle per-port reset if needed + LPS0 () - // Set MMIO 0x80e0[15] - AX15 = 1 + // Set MMIO 0x80e0[15] + AX15 = 1 + + // Clear PCI CFG offset 0x40[11] + ^SWAI = 0 + + // Clear PCI CFG offset 0x44[13:12] + ^SAIP = 0 + } #else // Set MMIO 0x8154[31] CLK2 = 1 + + // Clear PCI CFG offset 0x40[11] + ^SWAI = 0 + + // Clear PCI CFG offset 0x44[13:12] + ^SAIP = 0 #endif Return () @@ -273,22 +295,36 @@ } #if CONFIG(INTEL_LYNXPOINT_LP) - // Set PCI 0xB0[14:13] - ^MB13 = 1 - ^MB14 = 1 + If (!\ISWP()) { + // Set PCI 0xB0[14:13] + ^MB13 = 1 + ^MB14 = 1 - // Set MMIO 0x816C[14,2] - CLK0 = 1 - CLK1 = 1 + // Set MMIO 0x816C[14,2] + CLK0 = 1 + CLK1 = 1 - // Clear MMIO 0x8154[31] - CLK2 = 0 + // Clear MMIO 0x8154[31] + CLK2 = 0 - // Clear MMIO 0x80e0[15] - AX15 = 0 + // Clear MMIO 0x80e0[15] + AX15 = 0 + + // Set PCI CFG offset 0x40[11] + ^SWAI = 1 + + // Set PCI CFG offset 0x44[13:12] + ^SAIP = 1 + } #else // Clear MMIO 0x8154[31] CLK2 = 0 + + // Set PCI CFG offset 0x40[11] + ^SWAI = 1 + + // Set PCI CFG offset 0x44[13:12] + ^SAIP = 1 #endif // Put device in D3 -- To view, visit https://review.coreboot.org/c/coreboot/+/46960 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I76bc07e585e8af292c7316442760d1cfabf1e9c9 Gerrit-Change-Number: 46960 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

5 8

Change in coreboot[master]: abuild: Fix board variant handling
by Keith Hui (Code Review) 17 Aug '23

17 Aug '23

Keith Hui has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/41918 ) Change subject: abuild: Fix board variant handling ...................................................................... abuild: Fix board variant handling Problem: Me: $ util/abuild/abuild -t asus/p2b -b p2b-ls abuild: No such target: asus/p2b, variant: p2b-ls Cause: We identify boards and variants using path names in tree, so I type in the test command above. abuild identifies all board variants the Kconfig way, in all caps and all underscores. Result: Expectation gap and abuild can't find anything where we expect it to. All variants with a hyphen in their names are affected. Fix: Add a substitution to replace hyphens with underscores. Test: I get my abuild with the command above, even a variant-specific test config works. Change-Id: I10d5b471dac41c50a85c4a309ec561b02687bb9a Signed-off-by: Keith Hui <buurin(a)gmail.com> --- M util/abuild/abuild 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/18/41918/1 diff --git a/util/abuild/abuild b/util/abuild/abuild index b6a6bfe..ca8a0cf 100755 --- a/util/abuild/abuild +++ b/util/abuild/abuild @@ -165,7 +165,7 @@ local targets local VARIANT_UC - VARIANT_UC=$(echo "${variant}" | tr '[:lower:]' '[:upper:]') + VARIANT_UC=$(echo "${variant}" | tr '[:lower:]' '[:upper:]' | tr '-' '_') targets=$(get_mainboards "$1") if [ -n "$targets" ]; then -- To view, visit https://review.coreboot.org/c/coreboot/+/41918 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I10d5b471dac41c50a85c4a309ec561b02687bb9a Gerrit-Change-Number: 41918 Gerrit-PatchSet: 1 Gerrit-Owner: Keith Hui <buurin(a)gmail.com> Gerrit-MessageType: newchange

5 9

Change in coreboot[master]: sb/intel/lynxpoint: Use Broadwell SerialIO implementation
by Angel Pons (Code Review) 15 Aug '23

15 Aug '23

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/46969 ) Change subject: sb/intel/lynxpoint: Use Broadwell SerialIO implementation ...................................................................... sb/intel/lynxpoint: Use Broadwell SerialIO implementation Add power state control methods for more devices using helper methods. Change-Id: I96a3b896346f6f1e5aa4a1dc45638cbcff01b7dd Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/southbridge/intel/lynxpoint/acpi/serialio.asl 1 file changed, 96 insertions(+), 34 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/69/46969/1 diff --git a/src/southbridge/intel/lynxpoint/acpi/serialio.asl b/src/southbridge/intel/lynxpoint/acpi/serialio.asl index 845949c..0e246f7 100644 --- a/src/southbridge/intel/lynxpoint/acpi/serialio.asl +++ b/src/southbridge/intel/lynxpoint/acpi/serialio.asl @@ -16,6 +16,28 @@ External (\S6EN) External (\S7EN) +// Put SerialIO device in D0 state +// Arg0 - Ref to offset 0x84 of device's PCI config space +Method (LPD0, 1, Serialized) +{ + DeRefOf (Arg0) &= 0xFFFFFFFC + Local0 = DeRefOf (Arg0) // Read back after writing + + // Use Local0 to avoid iasl warning: Method Local is set but never used + Local0 &= Ones +} + +// Put SerialIO device in D3 state +// Arg0 - Ref to offset 0x84 of device's PCI config space +Method (LPD3, 1, Serialized) +{ + DeRefOf (Arg0) |= 0x3 + Local0 = DeRefOf (Arg0) // Read back after writing + + // Use Local0 to avoid iasl warning: Method Local is set but never used + Local0 &= Ones +} + // Serial IO Resource Consumption for BAR1 Device (SIOR) { @@ -193,32 +215,20 @@ } } - // Access to PCI Config in ACPI mode - OperationRegion (KEYS, SystemMemory, \S1B1, 0x100) - Field (KEYS, DWordAcc, NoLock, Preserve) + OperationRegion (SPRT, SystemMemory, \S1B1 + 0x84, 4) + Field (SPRT, DWordAcc, NoLock, Preserve) { - Offset (0x84), - PSAT, 32, + SPCS, 32 } - // Put controller in D0 state Method (_PS0, 0, Serialized) { - ^PSAT &= 0xfffffffc - Local0 = ^PSAT // Read back after writing - - // Use Local0 to avoid iasl warning: Method Local is set but never used - Local0 &= Ones + ^^LPD0 (RefOf (SPCS)) } - // Put controller in D3Hot state Method (_PS3, 0, Serialized) { - ^PSAT |= 0x00000003 - Local0 = ^PSAT // Read back after writing - - // Use Local0 to avoid iasl warning: Method Local is set but never used - Local0 &= Ones + ^^LPD3 (RefOf (SPCS)) } } @@ -273,32 +283,20 @@ } } - // Access to PCI Config in ACPI mode - OperationRegion (KEYS, SystemMemory, \S2B1, 0x100) - Field (KEYS, DWordAcc, NoLock, Preserve) + OperationRegion (SPRT, SystemMemory, \S2B1 + 0x84, 4) + Field (SPRT, DWordAcc, NoLock, Preserve) { - Offset (0x84), - PSAT, 32, + SPCS, 32 } - // Put controller in D0 state Method (_PS0, 0, Serialized) { - ^PSAT &= 0xfffffffc - Local0 = ^PSAT // Read back after writing - - // Use Local0 to avoid iasl warning: Method Local is set but never used - Local0 &= Ones + ^^LPD0 (RefOf (SPCS)) } - // Put controller in D3Hot state Method (_PS3, 0, Serialized) { - ^PSAT |= 0x00000003 - Local0 = ^PSAT // Read back after writing - - // Use Local0 to avoid iasl warning: Method Local is set but never used - Local0 &= Ones + ^^LPD3 (RefOf (SPCS)) } } @@ -337,6 +335,22 @@ Return (0xF) } } + + OperationRegion (SPRT, SystemMemory, \S3B1 + 0x84, 4) + Field (SPRT, DWordAcc, NoLock, Preserve) + { + SPCS, 32 + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (RefOf (SPCS)) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (RefOf (SPCS)) + } } Device (SPI1) @@ -386,6 +400,22 @@ Return (0xF) } } + + OperationRegion (SPRT, SystemMemory, \S4B1 + 0x84, 4) + Field (SPRT, DWordAcc, NoLock, Preserve) + { + SPCS, 32 + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (RefOf (SPCS)) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (RefOf (SPCS)) + } } Device (UAR0) @@ -435,6 +465,22 @@ Return (0xF) } } + + OperationRegion (SPRT, SystemMemory, \S5B1 + 0x84, 4) + Field (SPRT, DWordAcc, NoLock, Preserve) + { + SPCS, 32 + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (RefOf (SPCS)) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (RefOf (SPCS)) + } } Device (UAR1) @@ -472,6 +518,22 @@ Return (0xF) } } + + OperationRegion (SPRT, SystemMemory, \S6B1 + 0x84, 4) + Field (SPRT, DWordAcc, NoLock, Preserve) + { + SPCS, 32 + } + + Method (_PS0, 0, Serialized) + { + ^^LPD0 (RefOf (SPCS)) + } + + Method (_PS3, 0, Serialized) + { + ^^LPD3 (RefOf (SPCS)) + } } Device (SDIO) -- To view, visit https://review.coreboot.org/c/coreboot/+/46969 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I96a3b896346f6f1e5aa4a1dc45638cbcff01b7dd Gerrit-Change-Number: 46969 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

3 6

Change in coreboot[master]: mb/asus/p2b: Add ACPI support for p3b-f
by Keith Hui (Code Review) 14 Aug '23

14 Aug '23

Keith Hui has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/41098 ) Change subject: mb/asus/p2b: Add ACPI support for p3b-f ...................................................................... mb/asus/p2b: Add ACPI support for p3b-f Finally! Power button works to turn board on and off. ACPI hooks to manipulate power and message LEDs work. Change-Id: I3736532df0efde4399fb36eb19df8db511fac6ea Signed-off-by: Keith Hui <buurin(a)gmail.com> --- M src/mainboard/asus/p2b/Kconfig M src/mainboard/asus/p2b/dsdt.asl A src/mainboard/asus/p2b/suspend.asl A src/mainboard/asus/p2b/variants/p3b-f/suspend.asl 4 files changed, 393 insertions(+), 36 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/41098/1 diff --git a/src/mainboard/asus/p2b/Kconfig b/src/mainboard/asus/p2b/Kconfig index 1ad25e1..45018d6 100644 --- a/src/mainboard/asus/p2b/Kconfig +++ b/src/mainboard/asus/p2b/Kconfig @@ -29,7 +29,7 @@ select HAVE_PIRQ_TABLE select BOARD_ROMSIZE_KB_256 select SDRAMPWR_4DIMM if BOARD_ASUS_P2B_LS || BOARD_ASUS_P3B_F - select HAVE_ACPI_TABLES if BOARD_ASUS_P2B || BOARD_ASUS_P2B_LS + select HAVE_ACPI_TABLES if BOARD_ASUS_P2B || BOARD_ASUS_P2B_LS || BOARD_ASUS_P3B_F select BASE_ASUS_P2B_D if BOARD_ASUS_P2B_D || BOARD_ASUS_P2B_DS config MAX_CPUS diff --git a/src/mainboard/asus/p2b/dsdt.asl b/src/mainboard/asus/p2b/dsdt.asl index 88be9ba..623b575 100644 --- a/src/mainboard/asus/p2b/dsdt.asl +++ b/src/mainboard/asus/p2b/dsdt.asl @@ -53,6 +53,7 @@ { Offset (0x03), TO12, 1, /* Device trap 12 */ +#if !CONFIG(BOARD_ASUS_P3B_F) Offset (0x08), FANM, 1, /* GPO0, meant for fan */ Offset (0x09), @@ -61,33 +62,25 @@ , 2, , 16, MSG0, 1 /* GPO30, message LED */ +#endif } - /* Prepare To Sleep, Arg0 is target S-state */ - Method (\_PTS, 1, NotSerialized) + OperationRegion (ECOS, SystemIO, 0x72, 0x02) + Field (ECOS, ByteAcc, NoLock, Preserve) { - /* Disable fan, blink power LED, if not turning off */ - If (LNotEqual (Arg0, 0x05)) - { - Store (Zero, FANM) - Store (Zero, PLED) - } - - /* Arms SMI for device 12 */ - Store (One, TO12) - /* Put out a POST code */ - Or (Arg0, 0xF0, P80) + CIDX, 8, + CDAT, 8 } - Method (\_WAK, 1, NotSerialized) + IndexField (CIDX, CDAT, ByteAcc, NoLock, Preserve) { - /* Re-enable fan, stop power led blinking */ - Store (One, FANM) - Store (One, PLED) - /* wake OK */ - Return(Package(0x02){0x00, 0x00}) + Offset (0x58), + RTCS, 8, + Offset (0x5F), + SUS3, 1, + , 3, + SLST, 4 } - /* Root of the bus hierarchy */ Scope (\_SB) { @@ -169,19 +162,9 @@ } } - /* ACPI Message */ - Scope (\_SI) - { - Method (_MSG, 1, NotSerialized) - { - If (LEqual (Arg0, Zero)) - { - Store (One, MSG0) - } - Else - { - Store (Zero, MSG0) - } - } - } +#if CONFIG(BOARD_ASUS_P3B_F) +#include "variants/p3b-f/suspend.asl" +#else +#include "suspend.asl" +#endif } diff --git a/src/mainboard/asus/p2b/suspend.asl b/src/mainboard/asus/p2b/suspend.asl new file mode 100644 index 0000000..5d2b540 --- /dev/null +++ b/src/mainboard/asus/p2b/suspend.asl @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +/* ASUS P2B family board DSDT declarations (at top level) that does not apply to P3B-F */ + +/** + * ACPI message indicator. + * + * @param Arg0 Number of waiting messages + */ +Scope (\_SI) +{ + Method (_MSG, 1, NotSerialized) + { + If (LEqual (Arg0, Zero)) + { + Store (One, MSG0) + } + Else + { + Store (Zero, MSG0) + } + } +} + +/** + * Prepare To Sleep. + * + * @param Arg0 Target ACPI S-state + */ +Method (\_PTS, 1, NotSerialized) +{ + /*SLST = Arg0*/ + /* Disable fan, blink power LED. S5 will turn them off too */ + If (Arg0 != 5) + { + FANM = 0 + PLED = 0 + } + + /* Arms SMI for device 12 */ + Store (One, TO12) + /* Put out a POST code */ + P80 = 0xF0 | Arg0 +} + +/** + * System wake. + * + * Returns a 2-DWORD package of: + * Status: Wake status (0 = success, 1 = failure (power), 2 = failure (thermal)) + * PSS: Actual S-state power supply entered if not 0 + * + * @param Arg0 Target ACPI S-state + * @return See description + */ +Method (\_WAK, 1, NotSerialized) +{ + /* Re-enable fan, stop power led blinking */ + FANM = 1 + PLED = 1 + /* wake OK */ + Return(Package(0x02){0x00, 0x00}) +} + diff --git a/src/mainboard/asus/p2b/variants/p3b-f/suspend.asl b/src/mainboard/asus/p2b/variants/p3b-f/suspend.asl new file mode 100644 index 0000000..a84c700 --- /dev/null +++ b/src/mainboard/asus/p2b/variants/p3b-f/suspend.asl @@ -0,0 +1,309 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* This file is part of the coreboot project. */ + +#include "southbridge/intel/i82371eb/i82371eb.h" + +/* ASUS P3B-F board specific (top level) DSDT declarations */ + +Name (PRW1, Package (0x04) +{ + Package (0x02) {0x09, 0x01}, + Package (0x02) {0x08, 0x01}, + Package (0x02) {0x0A, 0x01}, + Package (0x02) {0x0B, 0x01} +}) + +Name (PRW3, Package (0x04) +{ + Package (0x02) { 0x09, 0x03 }, + Package (0x02) { 0x08, 0x03 }, + Package (0x02) { 0x0A, 0x03 }, + Package (0x02) { 0x0B, 0x04 } +}) + +Name (PRWT, Package (0x04) +{ + 0x09, + 0x08, + 0x0A, + 0x0B +}) + +/* SPRW(n) = (SUS3==0) ? PRW1[n] : PRW3[n] */ +Method (SPRW, 1, NotSerialized) +{ + Store (Match (PRWT, MEQ, Arg0, MTR, 0x00, 0x00), Local0) + If (LEqual (SUS3, Zero)) + { + Return (DerefOf (Index (PRW1, Local0))) + } + Else + { + Return (DerefOf (Index (PRW3, Local0))) + } +} + +/* + * SMBus driver functions + * + * These functions communicate with the AS99127F ASIC on the P3B-F to handle hardware + * sequencing required around S3 suspend and resume. This chip is undocumented except it has + * W83781D-compatible hardware monitoring features, and seems to be responsible for hiding the + * flashchip from internal programming via flashrom. + * + * Note: The SMBus host controller interface is located in the southbridge. + */ + /* The SMBus controller hardware interface. Only byte accesses covered. */ + OperationRegion (SM00, SystemIO, SMBUS_IO_BASE, 7) + Field (SM00, ByteAcc, NoLock, Preserve) + { + HSTS, 8, + Offset (0x02), + CTLR, 8, + CMDR, 8, + ADDR, 8, + DAT0, 8, + DAT1, 8 + } + /* Wait for SMBus activity to complete, error or not */ + Method (SWFS, 0, NotSerialized) + { + And (HSTS, 0x06, Local0) + While (Local0 == 0) + { + Stall (1) + And (HSTS, 0x06, Local0) + } + } + + /** + * Writes a byte to a SMBus device. + * + * @param Arg0 SMBus device ID << 1 + * @param Arg1 Command (register index in our case) + * @param Arg2 Data + */ + Method (WBYT, 3, NotSerialized) + { + Store (Arg0, ADDR) + Store (Arg1, CMDR) + Store (Arg2, DAT0) + Store (0xFF, HSTS) + Store (0x48, CTLR) /* Start a byte data R/W access */ + SWFS () + } + + /** + * Reads a byte from a SMBus device. + * + * @param Arg0 SMBus device ID << 1 + * @param Arg1 Command (register index in our case) + * @return Data read + */ + Method (RBYT, 2, NotSerialized) + { + Or (Arg0, 0x01, ADDR) /* Set bit 0, this will be a read */ + Store (Arg1, CMDR) + Store (0xFF, HSTS) + Store (0x48, CTLR) /* Start a byte data R/W access */ + + /* If interrupted without success, restart and try again */ + And (HSTS, 0x02, Local0) + While (LEqual (Local0, Zero)) + { + Store (0xFF, HSTS) + Store (0x48, CTLR) + SWFS () + And (HSTS, 0x02, Local0) + } + + Return (DAT0) /* \DAT0 */ + } + + Method (SGOH, 2, NotSerialized) + { + /* SMBus address 0x48 */ + Store (0x90, Local0) + Store (RBYT (Local0, Arg0), Local1) + Or (Local1, Arg1, Local1) + WBYT (Local0, Arg0, Local1) + } + + Method (SGOL, 2, NotSerialized) + { + Store (0x90, Local0) + Store (RBYT (Local0, Arg0), Local1) + Not (Arg1, Local2) + And (Local1, Local2, Local1) + WBYT (Local0, Arg0, Local1) + } + + Method (FANC, 1, NotSerialized) + { + /* SMBus address 0x2d */ + WBYT (0x5A, 0x59, Arg0) + } + + Method (FANP, 1, NotSerialized) + { + WBYT (0x5A, 0x5A, Arg0) + } + + Method (EN18, 0, NotSerialized) + { + Store (0x5A, Local0) + Store (RBYT (Local0, 0x5F), Local1) + And (Local1, 0xDF, Local1) + WBYT (Local0, 0x5F, Local1) + } + + Method (DS18, 0, NotSerialized) + { + Store (0x5A, Local0) + Store (RBYT (Local0, 0x5F), Local1) + Or (Local1, 0x20, Local1) + WBYT (Local0, 0x5F, Local1) + } + +/** + * Prepare To Sleep, + * + * @param Arg0 Target ACPI S-state + */ + Method (\_PTS, 1, NotSerialized) + { + SLST = Arg0 + If (Arg0 == 0x01) + { + /* Disable BX.PMCR[CRst_En] */ + Store (\_SB.PCI0.NB.PMCR, Local0) + And (Local0, 0xFE, \_SB.PCI0.NB.PMCR) + + /* Isolate CPU_STP# and SUS_STAT1# signals at GENCFG register */ + Store (\_SB.PCI0.PX40.FXS1, Local0) + Or (Local0, 0x24, Local1) + Store (Local1, \_SB.PCI0.PX40.FXS1) + + \_SB.PCI0.ENTER_CONFIG_MODE (0x0A) + /* In SIO Dev A CR E4 = xxxx01xx (these bits are reserved per datasheet?) */ + And (\_SB.PCI0.KBWK, 0xF7, Local0) + Or (Local0, 0x04, \_SB.PCI0.KBWK) + \_SB.PCI0.EXIT_CONFIG_MODE () + } + + If (Arg0 == 0x03) + { + SGOH (0x83, 0x04) + SGOL (0x80, 0x04) + SGOH (0x80, 0x04) + SGOH (0x83, 0x01) + EN18 () + } + + /* Arms SMI for device 12 */ + TO12 = 1 + /* Put out a POST code */ + P80 = 0xF0 | Arg0 + } + +/** + * System wake. + * + * Returns a 2-DWORD package of: + * Status: Wake status (0 = success, 1 = failure (power), 2 = failure (thermal)) + * PSS: Actual S-state power supply entered if not 0 + * + * @param Arg0 Target ACPI S-state + * @return See description + */ + Method (\_WAK, 1, NotSerialized) // _WAK: Wake + { + DS18 () + Store (Zero, TO12) + /* Restore CPU_STP# and SUS_STAT1# signals */ + Store (\_SB.PCI0.PX40.FXS1, Local0) + And (Local0, 0xDB, \_SB.PCI0.PX40.FXS1) + SGOL (0x83, 0x01) + \_SB.PCI0.ENTER_CONFIG_MODE (0x0A) + And (\_SB.PCI0.MSWK, 0xFD, Local1) + Store (Local1, \_SB.PCI0.MSWK) + /* In SIO Dev A CR E4 = xxxx00xx */ + And (\_SB.PCI0.KBWK, 0xF3, Local0) + Store (Local0, \_SB.PCI0.KBWK) + \_SB.PCI0.EXIT_CONFIG_MODE () + /* Put out a POST code */ + P80 = 0xFF + Return(Package(0x02){0x00, 0x00}) + } + + Scope (\_GPE) + { + Method (_L0A, 0, NotSerialized) // _Lxx: Level-Triggered GPE + { + Notify (\_SB.PCI0.SER2, 0x02) // Device Wake + Notify (\_SB.PCI0.SER3, 0x02) // Device Wake + } + + Method (_L09, 0, NotSerialized) // _Lxx: Level-Triggered GPE + { + Notify (\_SB.PCI0, 0x02) // Device Wake + } + } + +Scope (\_SI) +{ + /** + * ACPI message indicator + * + * @param Arg0 Number of waiting messages + */ + Method (_MSG, 1, NotSerialized) + { + If (LEqual (Arg0, Zero)) + { + SGOL (0x81, 0x02) + SGOH (0x81, 0x01) + SGOL (0x81, 0x01) + } + Else + { + SGOH (0x81, 0x02) + SGOL (0x81, 0x02) + } + } + + + /** + * System Status. OS calls to set system status indicator. + * Arg0: + * 0 = Indicator off + * 1 = Working + * 2 = Waking + * 3 = Sleeping: States S1, S2, S3 + * 4 = Sleeping with context saved to non-volatile storage. + * + * @param Arg0 System status indicator + */ + Method (_SST, 1, NotSerialized) // _SST: System Status + { + If (LEqual (Arg0, 0x00)) + { + SGOH (0x80, 0x40) + } + ElseIf (LEqual (Arg0, 0x03)) + { + SGOL (0x80, 0x40) + SGOL (0x80, 0x80) + FANC (0x81) + FANP (0x81) + } + Else + { + SGOL (0x80, 0x40) + SGOH (0x80, 0x80) + FANC (0x8F) + FANP (0x8F) + } + } +} + -- To view, visit https://review.coreboot.org/c/coreboot/+/41098 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3736532df0efde4399fb36eb19df8db511fac6ea Gerrit-Change-Number: 41098 Gerrit-PatchSet: 1 Gerrit-Owner: Keith Hui <buurin(a)gmail.com> Gerrit-MessageType: newchange

5 23

Change in coreboot[master]: nb/intel/sandybridge: Clarify RAM overclock options
by Angel Pons (Code Review) 12 Aug '23

12 Aug '23

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/47429 ) Change subject: nb/intel/sandybridge: Clarify RAM overclock options ...................................................................... nb/intel/sandybridge: Clarify RAM overclock options Rewrite them to more accurately describe what they are about. Change-Id: Icb0ac1e592b662bbb81da431ff97af1a00f952c0 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/northbridge/intel/sandybridge/Kconfig 1 file changed, 7 insertions(+), 7 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/29/47429/1 diff --git a/src/northbridge/intel/sandybridge/Kconfig b/src/northbridge/intel/sandybridge/Kconfig index ef6dc3d..b4834cd 100644 --- a/src/northbridge/intel/sandybridge/Kconfig +++ b/src/northbridge/intel/sandybridge/Kconfig @@ -44,19 +44,19 @@ System Agent/MRC.bin. You should answer Y. config NATIVE_RAMINIT_IGNORE_MAX_MEM_FUSES - bool "Ignore vendor programmed fuses that limit max. DRAM frequency" + bool "[OVERCLOCKING] Ignore CAPID fuses that limit max. DRAM frequency" default n depends on USE_NATIVE_RAMINIT help - Ignore the mainboard's vendor programmed fuses that might limit the - maximum DRAM frequency. By selecting this option the fuses will be - ignored and the only limits on DRAM frequency are set by RAM's SPD and - hard fuses in southbridge's clockgen. - Disabled by default as it might causes system instability. + Ignore the CAPID fuses and devicetree settings that might limit the + maximum DRAM frequency on overclocking-capable parts. By selecting + this option, the fuse values will be ignored and the only limits on + DRAM frequency are determined by SPD values and hard limits in the + northbridge's MPLL. Disabled by default as it can cause instability. Handle with care! config NATIVE_RAMINIT_IGNORE_XMP_MAX_DIMMS - bool "Ignore XMP profile max DIMMs per channel" + bool "[OVERCLOCKING] Ignore XMP profile max DIMMs per channel" default n depends on USE_NATIVE_RAMINIT help -- To view, visit https://review.coreboot.org/c/coreboot/+/47429 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Icb0ac1e592b662bbb81da431ff97af1a00f952c0 Gerrit-Change-Number: 47429 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

6 10

Change in coreboot[master]: bootsplash: Allow bootsplash compression
by Michał Żygowski (Code Review) 10 Aug '23

10 Aug '23

Michał Żygowski has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42806 ) Change subject: bootsplash: Allow bootsplash compression ...................................................................... bootsplash: Allow bootsplash compression TEST=include BMP bootsplash and select the compression, boot Protectli FW6 with SeaBIOS and observe the bootsplash on the screen Signed-off-by: Michał Żygowski <michal.zygowski(a)3mdeb.com> Change-Id: Id9abc6f72e3f82ce60cd06376cdc4f49f0198823 --- M Makefile.inc M src/Kconfig 2 files changed, 16 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/06/42806/1 diff --git a/Makefile.inc b/Makefile.inc index 7f61a5e..af931f7 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -1218,9 +1218,16 @@ revision-type := raw BOOTSPLASH_SUFFIX=$(suffix $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE))) +ifeq ($(CONFIG_COMPRESS_BOOTSPLASH),) cbfs-files-$(CONFIG_BOOTSPLASH_IMAGE) += bootsplash$(BOOTSPLASH_SUFFIX) bootsplash$(BOOTSPLASH_SUFFIX)-file := $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE)) bootsplash$(BOOTSPLASH_SUFFIX)-type := bootsplash +else +cbfs-files-$(CONFIG_BOOTSPLASH_IMAGE) += bootsplash$(BOOTSPLASH_SUFFIX).lzma +bootsplash$(BOOTSPLASH_SUFFIX).lzma-file := $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE)) +bootsplash$(BOOTSPLASH_SUFFIX).lzma-compression := $(CBFS_COMPRESS_FLAG) +bootsplash$(BOOTSPLASH_SUFFIX).lzma-type := bootsplash +endif # Ensure that no payload segment overlaps with memory regions used by ramstage # (not for x86 since it can relocate itself in that case) diff --git a/src/Kconfig b/src/Kconfig index 1b49e2b..ec3a274 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -315,6 +315,15 @@ This will only add the image to the ROM. To actually run it check options under 'Display' section. +config COMPRESS_BOOTSPLASH + bool "Compress bootsplash image" + depends on PAYLOAD_SEABIOS + help + The bootsplash image can be compressed with LZMA. This is especially + useful when BMP bootsplash is used and occupies too much SPI flash + space. The bootsplash CBFS file name will be compressed and suffixed + with lzma extension to indicate SeaBIOS to decompress it when loaded. + config BOOTSPLASH_FILE string "Bootsplash path and filename" depends on BOOTSPLASH_IMAGE -- To view, visit https://review.coreboot.org/c/coreboot/+/42806 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id9abc6f72e3f82ce60cd06376cdc4f49f0198823 Gerrit-Change-Number: 42806 Gerrit-PatchSet: 1 Gerrit-Owner: Michał Żygowski <michal.zygowski(a)3mdeb.com> Gerrit-MessageType: newchange

3 6

Change in coreboot[master]: drivers/intel/dptf: Generate ACPI identifiers only for enabled devices
by Karthik Ramasubramanian (Code Review) 08 Aug '23

08 Aug '23

Karthik Ramasubramanian has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/47148 ) Change subject: drivers/intel/dptf: Generate ACPI identifiers only for enabled devices ...................................................................... drivers/intel/dptf: Generate ACPI identifiers only for enabled devices DPTF configuration can be applied based on firmware configuration. Hence generate ACPI identifiers only for enabled devices. BUG=b:170229672 TEST=Build and boot to OS in Drawlat and Drawcia. Ensure that the ACPI identifier is enabled only for enabled devices. Change-Id: Ib042bec7e8c68b38fafa60a8e965d781bddcd1f0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub(a)google.com> --- M src/drivers/intel/dptf/dptf.c 1 file changed, 3 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/48/47148/1 diff --git a/src/drivers/intel/dptf/dptf.c b/src/drivers/intel/dptf/dptf.c index 0f1cc9c..e0e2202 100644 --- a/src/drivers/intel/dptf/dptf.c +++ b/src/drivers/intel/dptf/dptf.c @@ -232,6 +232,9 @@ { struct drivers_intel_dptf_config *config = config_of(dev); + if (!dev->enabled) + return; + write_device_definitions(dev); write_policies(config); write_controls(config); -- To view, visit https://review.coreboot.org/c/coreboot/+/47148 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ib042bec7e8c68b38fafa60a8e965d781bddcd1f0 Gerrit-Change-Number: 47148 Gerrit-PatchSet: 1 Gerrit-Owner: Karthik Ramasubramanian <kramasub(a)google.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

9 18

Change in coreboot[master]: soc/intel/common/block/cpu/car: Enable caching before FSP-T
by Gaggery Tsai (Code Review) 07 Aug '23

07 Aug '23

Gaggery Tsai has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38252 ) Change subject: soc/intel/common/block/cpu/car: Enable caching before FSP-T ...................................................................... soc/intel/common/block/cpu/car: Enable caching before FSP-T This patch is required for Boot Guard enabled platform. Enable caching before entering FSP-T. TEST=Stitch boot guard ACM with signed KM and BPM && Enable FSP-T and boot all the way to the OS && Read MSR 0x13a and esnure boot guard verified boot and measured boot are enabled. Change-Id: Ie1def754f7b0024725638fcea481fd3273ef3d24 --- M src/soc/intel/common/block/cpu/car/cache_as_ram_fsp.S 1 file changed, 6 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/52/38252/1 diff --git a/src/soc/intel/common/block/cpu/car/cache_as_ram_fsp.S b/src/soc/intel/common/block/cpu/car/cache_as_ram_fsp.S index 091fc4a..fd22903 100644 --- a/src/soc/intel/common/block/cpu/car/cache_as_ram_fsp.S +++ b/src/soc/intel/common/block/cpu/car/cache_as_ram_fsp.S @@ -35,6 +35,12 @@ cache_as_ram: post_code(0x21) + /* Enable caching */ + mov %cr0, %eax + and $~(CR0_CD | CR0_NW), %eax + invd + mov %eax, %cr0 + /* find fsp in cbfs */ lea fsp_name, %esi mov $1f, %esp -- To view, visit https://review.coreboot.org/c/coreboot/+/38252 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ie1def754f7b0024725638fcea481fd3273ef3d24 Gerrit-Change-Number: 38252 Gerrit-PatchSet: 1 Gerrit-Owner: Gaggery Tsai <gaggery.tsai(a)intel.com> Gerrit-MessageType: newchange

12 29

Change in ...coreboot[master]: mb/*/romstage: Drop defines already set by raminit code
by Patrick Rudolph (Code Review) 07 Aug '23

07 Aug '23

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32070 Change subject: mb/*/romstage: Drop defines already set by raminit code ...................................................................... mb/*/romstage: Drop defines already set by raminit code Drop defines that are set by raminit code. Change-Id: Ica844a70b50486b4db3744cb123b3e4b8d5bedb0 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/mainboard/asrock/h81m-hds/romstage.c M src/mainboard/google/beltino/romstage.c M src/mainboard/google/butterfly/romstage.c M src/mainboard/google/link/romstage.c M src/mainboard/google/parrot/romstage.c M src/mainboard/google/slippy/variants/falco/romstage.c M src/mainboard/google/slippy/variants/leon/romstage.c M src/mainboard/google/slippy/variants/peppy/romstage.c M src/mainboard/google/slippy/variants/wolf/romstage.c M src/mainboard/google/stout/romstage.c M src/mainboard/intel/dcp847ske/romstage.c M src/mainboard/intel/emeraldlake2/romstage.c M src/mainboard/kontron/ktqm77/romstage.c M src/mainboard/lenovo/x220/romstage.c M src/mainboard/roda/rv11/variants/rv11/romstage.c M src/mainboard/roda/rv11/variants/rw11/romstage.c M src/mainboard/samsung/lumpy/romstage.c M src/mainboard/samsung/stumpy/romstage.c M src/mainboard/supermicro/x10slm-f/romstage.c 19 files changed, 0 insertions(+), 265 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/70/32070/1 diff --git a/src/mainboard/asrock/h81m-hds/romstage.c b/src/mainboard/asrock/h81m-hds/romstage.c index a917722..68ed658 100644 --- a/src/mainboard/asrock/h81m-hds/romstage.c +++ b/src/mainboard/asrock/h81m-hds/romstage.c @@ -74,20 +74,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 1, /* desktop/server */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, .ec_present = 0, .dimm_channel0_disabled = 2, /* Disable DIMM 1 on channel 0. */ diff --git a/src/mainboard/google/beltino/romstage.c b/src/mainboard/google/beltino/romstage.c index 70a8c19..6417f0d 100644 --- a/src/mainboard/google/beltino/romstage.c +++ b/src/mainboard/google/beltino/romstage.c @@ -71,20 +71,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, .ec_present = 0, // 0 = leave channel enabled diff --git a/src/mainboard/google/butterfly/romstage.c b/src/mainboard/google/butterfly/romstage.c index d34b1e4..cbd9f3d 100644 --- a/src/mainboard/google/butterfly/romstage.c +++ b/src/mainboard/google/butterfly/romstage.c @@ -132,20 +132,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/google/link/romstage.c b/src/mainboard/google/link/romstage.c index 66a503d0..6617dc4 100644 --- a/src/mainboard/google/link/romstage.c +++ b/src/mainboard/google/link/romstage.c @@ -127,20 +127,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, .ddr3lv_support = 1, diff --git a/src/mainboard/google/parrot/romstage.c b/src/mainboard/google/parrot/romstage.c index 76a4b4b..d76d814 100644 --- a/src/mainboard/google/parrot/romstage.c +++ b/src/mainboard/google/parrot/romstage.c @@ -101,20 +101,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/google/slippy/variants/falco/romstage.c b/src/mainboard/google/slippy/variants/falco/romstage.c index 25f8d27..2244119 100644 --- a/src/mainboard/google/slippy/variants/falco/romstage.c +++ b/src/mainboard/google/slippy/variants/falco/romstage.c @@ -109,20 +109,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/slippy/variants/leon/romstage.c b/src/mainboard/google/slippy/variants/leon/romstage.c index b95c6e1..35345d0 100644 --- a/src/mainboard/google/slippy/variants/leon/romstage.c +++ b/src/mainboard/google/slippy/variants/leon/romstage.c @@ -106,20 +106,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/slippy/variants/peppy/romstage.c b/src/mainboard/google/slippy/variants/peppy/romstage.c index e47edc7..a5de6c0 100644 --- a/src/mainboard/google/slippy/variants/peppy/romstage.c +++ b/src/mainboard/google/slippy/variants/peppy/romstage.c @@ -124,20 +124,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/slippy/variants/wolf/romstage.c b/src/mainboard/google/slippy/variants/wolf/romstage.c index 3125efe..5a8c972 100644 --- a/src/mainboard/google/slippy/variants/wolf/romstage.c +++ b/src/mainboard/google/slippy/variants/wolf/romstage.c @@ -111,20 +111,7 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, .ec_present = 1, // 0 = leave channel enabled diff --git a/src/mainboard/google/stout/romstage.c b/src/mainboard/google/stout/romstage.c index 7539dd7..6e32145 100644 --- a/src/mainboard/google/stout/romstage.c +++ b/src/mainboard/google/stout/romstage.c @@ -137,20 +137,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/intel/dcp847ske/romstage.c b/src/mainboard/intel/dcp847ske/romstage.c index 24ec912..2043cf6 100644 --- a/src/mainboard/intel/dcp847ske/romstage.c +++ b/src/mainboard/intel/dcp847ske/romstage.c @@ -29,20 +29,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa2, 0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 0, diff --git a/src/mainboard/intel/emeraldlake2/romstage.c b/src/mainboard/intel/emeraldlake2/romstage.c index 9a9fc24..8cd7ec2 100644 --- a/src/mainboard/intel/emeraldlake2/romstage.c +++ b/src/mainboard/intel/emeraldlake2/romstage.c @@ -94,20 +94,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 0, diff --git a/src/mainboard/kontron/ktqm77/romstage.c b/src/mainboard/kontron/ktqm77/romstage.c index f778f96..e0f8954 100644 --- a/src/mainboard/kontron/ktqm77/romstage.c +++ b/src/mainboard/kontron/ktqm77/romstage.c @@ -80,20 +80,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, /* 0 Mobile, 1 Desktop/Server */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/lenovo/x220/romstage.c b/src/mainboard/lenovo/x220/romstage.c index a5b0c81..d398d81 100644 --- a/src/mainboard/lenovo/x220/romstage.c +++ b/src/mainboard/lenovo/x220/romstage.c @@ -50,20 +50,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00,0xa2,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/roda/rv11/variants/rv11/romstage.c b/src/mainboard/roda/rv11/variants/rv11/romstage.c index 685e942..df679f1 100644 --- a/src/mainboard/roda/rv11/variants/rv11/romstage.c +++ b/src/mainboard/roda/rv11/variants/rv11/romstage.c @@ -37,20 +37,6 @@ { const struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0x00, 0xA4, 0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/roda/rv11/variants/rw11/romstage.c b/src/mainboard/roda/rv11/variants/rw11/romstage.c index 97d9d2b..56ac32c 100644 --- a/src/mainboard/roda/rv11/variants/rw11/romstage.c +++ b/src/mainboard/roda/rv11/variants/rw11/romstage.c @@ -66,20 +66,6 @@ { const struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xA0, 0xA2, 0xA4, 0xA6 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/samsung/lumpy/romstage.c b/src/mainboard/samsung/lumpy/romstage.c index 1080689..29fe08b 100644 --- a/src/mainboard/samsung/lumpy/romstage.c +++ b/src/mainboard/samsung/lumpy/romstage.c @@ -156,20 +156,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00,0x00,0x00 }, .ts_addresses = { 0x30, 0x00, 0x00, 0x00 }, .ec_present = 1, diff --git a/src/mainboard/samsung/stumpy/romstage.c b/src/mainboard/samsung/stumpy/romstage.c index a8e28d6..510efbe 100644 --- a/src/mainboard/samsung/stumpy/romstage.c +++ b/src/mainboard/samsung/stumpy/romstage.c @@ -144,20 +144,6 @@ { struct pei_data pei_data_template = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = (uintptr_t)DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0x00,0xa4,0x00 }, .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, .ec_present = 0, diff --git a/src/mainboard/supermicro/x10slm-f/romstage.c b/src/mainboard/supermicro/x10slm-f/romstage.c index 84ad047..702e8bb 100644 --- a/src/mainboard/supermicro/x10slm-f/romstage.c +++ b/src/mainboard/supermicro/x10slm-f/romstage.c @@ -66,20 +66,6 @@ { struct pei_data pei_data = { .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 1, /* desktop/server */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, .ec_present = 0, .ddr_refresh_2x = 1, -- To view, visit https://review.coreboot.org/c/coreboot/+/32070 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ica844a70b50486b4db3744cb123b3e4b8d5bedb0 Gerrit-Change-Number: 32070 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

4 13

Change in coreboot[master]: nb/intel/gm45: Fix compilation on x86_64
by Patrick Rudolph (Code Review) 07 Aug '23

07 Aug '23

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/45824 ) Change subject: nb/intel/gm45: Fix compilation on x86_64 ...................................................................... nb/intel/gm45: Fix compilation on x86_64 Fix integer-pointer conversion to allow the code to be compiled under x86_64. This commit doesn't change any functionality. Tested on Lenovo T500 with additional patches. Change-Id: Ic8b1f99cb4a8c09237f4644a7438fba34597d65c Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/northbridge/intel/gm45/gm45.h M src/northbridge/intel/gm45/iommu.c M src/northbridge/intel/gm45/northbridge.c M src/northbridge/intel/gm45/raminit.c M src/northbridge/intel/gm45/raminit_read_write_training.c M src/northbridge/intel/x4x/dq_dqs.c M src/northbridge/intel/x4x/northbridge.c M src/northbridge/intel/x4x/raminit_ddr23.c M src/northbridge/intel/x4x/rcven.c M src/southbridge/intel/i82801jx/lpc.c 10 files changed, 23 insertions(+), 21 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/45824/1 diff --git a/src/northbridge/intel/gm45/gm45.h b/src/northbridge/intel/gm45/gm45.h index 95457fb..01a645f 100644 --- a/src/northbridge/intel/gm45/gm45.h +++ b/src/northbridge/intel/gm45/gm45.h @@ -231,9 +231,9 @@ * MCHBAR */ -#define MCHBAR8(x) *((volatile u8 *)(DEFAULT_MCHBAR + x)) -#define MCHBAR16(x) *((volatile u16 *)(DEFAULT_MCHBAR + x)) -#define MCHBAR32(x) *((volatile u32 *)(DEFAULT_MCHBAR + x)) +#define MCHBAR8(x) *((volatile u8 *)((uintptr_t)DEFAULT_MCHBAR + x)) +#define MCHBAR16(x) *((volatile u16 *)((uintptr_t)DEFAULT_MCHBAR + x)) +#define MCHBAR32(x) *((volatile u32 *)((uintptr_t)DEFAULT_MCHBAR + x)) #define HPLLVCO_MCHBAR 0x0c0f @@ -395,7 +395,7 @@ void igd_compute_ggc(sysinfo_t *const sysinfo); int raminit_read_vco_index(void); -u32 raminit_get_rank_addr(unsigned int channel, unsigned int rank); +uintptr_t raminit_get_rank_addr(unsigned int channel, unsigned int rank); void raminit_rcomp_calibration(stepping_t stepping); void raminit_reset_readwrite_pointers(void); diff --git a/src/northbridge/intel/gm45/iommu.c b/src/northbridge/intel/gm45/iommu.c index 09df12d..d7a54d8 100644 --- a/src/northbridge/intel/gm45/iommu.c +++ b/src/northbridge/intel/gm45/iommu.c @@ -37,7 +37,8 @@ /* setup somewhere */ pci_or_config16(igd, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - void *bar = (void *)pci_read_config32(igd, PCI_BASE_ADDRESS_0); + /* FIXME: Why is GTT cleared here and who sets up BAR0? */ + void *bar = (void *)(uintptr_t)pci_read_config32(igd, PCI_BASE_ADDRESS_0); /* clear GTT, 2MB is enough (and should be safe) */ memset(bar, 0, 2<<20); diff --git a/src/northbridge/intel/gm45/northbridge.c b/src/northbridge/intel/gm45/northbridge.c index 8c27d50..5df4f01 100644 --- a/src/northbridge/intel/gm45/northbridge.c +++ b/src/northbridge/intel/gm45/northbridge.c @@ -124,7 +124,7 @@ /* cbmem_top can be shifted downwards due to alignment. Mark the region between cbmem_top and tomk as unusable */ - delta_cbmem = tomk - ((uint32_t)cbmem_top() >> 10); + delta_cbmem = tomk - ((uintptr_t)cbmem_top() >> 10); tomk -= delta_cbmem; uma_sizek += delta_cbmem; diff --git a/src/northbridge/intel/gm45/raminit.c b/src/northbridge/intel/gm45/raminit.c index 7fc97f01..4a9035b 100644 --- a/src/northbridge/intel/gm45/raminit.c +++ b/src/northbridge/intel/gm45/raminit.c @@ -1575,8 +1575,8 @@ /* We won't do this in dual-interleaved mode, so don't care about the offset. Mirrored ranks aren't taken into account here. */ - const u32 rankaddr = raminit_get_rank_addr(ch, r); - printk(BIOS_DEBUG, "JEDEC init @0x%08x\n", rankaddr); + const uintptr_t rankaddr = raminit_get_rank_addr(ch, r); + printk(BIOS_DEBUG, "JEDEC init @0x%08zx\n", rankaddr); MCHBAR32(DCC_MCHBAR) = (MCHBAR32(DCC_MCHBAR) & ~DCC_SET_EREG_MASK) | DCC_SET_EREGx(2); read32((u32 *)(rankaddr | WL)); MCHBAR32(DCC_MCHBAR) = (MCHBAR32(DCC_MCHBAR) & ~DCC_SET_EREG_MASK) | DCC_SET_EREGx(3); @@ -1658,7 +1658,7 @@ } } -u32 raminit_get_rank_addr(unsigned int channel, unsigned int rank) +uintptr_t raminit_get_rank_addr(unsigned int channel, unsigned int rank) { if (!channel && !rank) return 0; /* Address of first rank */ @@ -1670,7 +1670,7 @@ rank = 3; /* Highest rank per channel */ channel--; } - const u32 reg = MCHBAR32(CxDRBy_MCHBAR(channel, rank)); + const uintptr_t reg = MCHBAR32(CxDRBy_MCHBAR(channel, rank)); /* Bound is in 32MB. */ return ((reg & CxDRBy_BOUND_MASK(rank)) >> CxDRBy_BOUND_SHIFT(rank)) << 25; } diff --git a/src/northbridge/intel/gm45/raminit_read_write_training.c b/src/northbridge/intel/gm45/raminit_read_write_training.c index e8d719f..31f6380 100644 --- a/src/northbridge/intel/gm45/raminit_read_write_training.c +++ b/src/northbridge/intel/gm45/raminit_read_write_training.c @@ -7,7 +7,7 @@ #include "gm45.h" typedef struct { - u32 addr[RANKS_PER_CHANNEL]; + uintptr_t addr[RANKS_PER_CHANNEL]; unsigned int count; } address_bunch_t; @@ -415,7 +415,7 @@ MCHBAR8(0x0218) |= 0x1 << 4; for (i = 0; i < addresses->count; ++i) { - const unsigned int addr = addresses->addr[i]; + const uintptr_t addr = addresses->addr[i]; unsigned int off; for (off = 0; off < 640; off += 8) { const u32 pattern = write_training_schedule[off >> 3]; diff --git a/src/northbridge/intel/x4x/dq_dqs.c b/src/northbridge/intel/x4x/dq_dqs.c index 1535452..9f60f87 100644 --- a/src/northbridge/intel/x4x/dq_dqs.c +++ b/src/northbridge/intel/x4x/dq_dqs.c @@ -161,7 +161,7 @@ static u8 test_dq_aligned(const struct sysinfo *s, const u8 channel) { - u32 address; + uintptr_t address; int rank, lane; u8 count, count1; u8 data[8]; @@ -357,7 +357,7 @@ { int i, rank, lane; volatile u8 data[8]; - u32 address; + uintptr_t address; u8 bytelane_error = 0; FOR_EACH_POPULATED_RANK_IN_CHANNEL(s->dimms, channel, rank) { @@ -436,7 +436,8 @@ int do_read_training(struct sysinfo *s) { int loop, channel, i, lane, rank; - u32 address, content; + uintptr_t address; + u32 content; u8 dqs_lower[TOTAL_BYTELANES]; u8 dqs_upper[TOTAL_BYTELANES]; struct rt_dqs_setting dqs_setting[TOTAL_BYTELANES]; @@ -626,7 +627,7 @@ static void sample_dq(const struct sysinfo *s, u8 channel, u8 rank, u8 high_found[8]) { - u32 address = test_address(channel, rank); + uintptr_t address = test_address(channel, rank); int samples, lane; memset(high_found, 0, TOTAL_BYTELANES * sizeof(high_found[0])); diff --git a/src/northbridge/intel/x4x/northbridge.c b/src/northbridge/intel/x4x/northbridge.c index 5e46270..5218100 100644 --- a/src/northbridge/intel/x4x/northbridge.c +++ b/src/northbridge/intel/x4x/northbridge.c @@ -74,7 +74,7 @@ /* cbmem_top can be shifted downwards due to alignment. Mark the region between cbmem_top and tomk as unusable */ - delta_cbmem = tomk - ((uint32_t)cbmem_top() >> 10); + delta_cbmem = tomk - ((uintptr_t)cbmem_top() >> 10); tomk -= delta_cbmem; uma_sizek += delta_cbmem; diff --git a/src/northbridge/intel/x4x/raminit_ddr23.c b/src/northbridge/intel/x4x/raminit_ddr23.c index 617ce11..92d234a 100644 --- a/src/northbridge/intel/x4x/raminit_ddr23.c +++ b/src/northbridge/intel/x4x/raminit_ddr23.c @@ -1296,7 +1296,7 @@ void send_jedec_cmd(const struct sysinfo *s, u8 r, u8 ch, u8 cmd, u32 val) { - u32 addr = test_address(ch, r); + uintptr_t addr = test_address(ch, r); u8 data8 = cmd; u32 data32; @@ -2136,7 +2136,7 @@ if (s->boot_path == BOOT_PATH_NORMAL) { FOR_EACH_POPULATED_RANK(s->dimms, ch, r) { for (bank = 0; bank < 4; bank++) - read32((u32 *)(test_address(ch, r) | 0x800000 | (bank << 12))); + read32((u32 *)((uintptr_t)test_address(ch, r) | 0x800000 | (bank << 12))); } } printk(BIOS_DEBUG, "Done dummy reads\n"); diff --git a/src/northbridge/intel/x4x/rcven.c b/src/northbridge/intel/x4x/rcven.c index 82481ab..c32ec54 100644 --- a/src/northbridge/intel/x4x/rcven.c +++ b/src/northbridge/intel/x4x/rcven.c @@ -23,7 +23,7 @@ asm volatile("mfence":::); } -static u8 sampledqs(u32 addr, u8 lane, u8 channel) +static u8 sampledqs(uintptr_t addr, u8 lane, u8 channel) { u32 sample_offset = 0x400 * channel + 0x561 + lane * 4; diff --git a/src/southbridge/intel/i82801jx/lpc.c b/src/southbridge/intel/i82801jx/lpc.c index 2f7b516..5ddbaa0 100644 --- a/src/southbridge/intel/i82801jx/lpc.c +++ b/src/southbridge/intel/i82801jx/lpc.c @@ -495,7 +495,7 @@ /* Add it to SSDT. */ acpigen_write_scope("\\"); - acpigen_write_name_dword("NVSA", (u32) gnvs); + acpigen_write_name_dword("NVSA", (u32)(uintptr_t) gnvs); acpigen_pop_len(); } } -- To view, visit https://review.coreboot.org/c/coreboot/+/45824 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ic8b1f99cb4a8c09237f4644a7438fba34597d65c Gerrit-Change-Number: 45824 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: Angel Pons <th3fanbus(a)gmail.com> Gerrit-Reviewer: Damien Zammit Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

5 8

← Newer
1
...
4
5
6
7
8
9
10
...
68
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit July 2022