coreboot-gerrit February 2020

coreboot-gerrit@coreboot.org

1 participants
1797 discussions

Change in coreboot[master]: soc/intel/cannonlake: Add Iccmax and loadlines for CML-S
by Gaggery Tsai (Code Review) 22 Dec '20

22 Dec '20

Gaggery Tsai has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38288 ) Change subject: soc/intel/cannonlake: Add Iccmax and loadlines for CML-S ...................................................................... soc/intel/cannonlake: Add Iccmax and loadlines for CML-S This patch adds Iccmax and AC/DC loadlines for CML-S CPUs. The information is from CML EDS volume 1, doc #606599. Change-Id: Id2797a979a8b6a52a34baae66f95c7136ed1dc72 Signed-off-by: Gaggery Tsai <gaggery.tsai(a)intel.com> --- M src/soc/intel/cannonlake/vr_config.c 1 file changed, 92 insertions(+), 22 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/88/38288/1 diff --git a/src/soc/intel/cannonlake/vr_config.c b/src/soc/intel/cannonlake/vr_config.c index 7096b62..78f51bc 100644 --- a/src/soc/intel/cannonlake/vr_config.c +++ b/src/soc/intel/cannonlake/vr_config.c @@ -91,37 +91,53 @@ /* * Iccmax table from Doc #337344 Section 7.2 DC Specifications for CFL. * Iccmax table from Doc #338023 Section 7.2 DC Specifications for WHL. + * Iccmax table from Doc #606599 Section 7.2 DC Specifications for CML. * * Platform Segment SA IA GT (GT/GTx) - * --------------------------------------------------------------------- - * CFL-U (28W) GT3 quad 8.5 64 64 - * CFL-U (28W) GT3 dual 8.5 64 64 + * ---------------------------------------------------------------------- + * CFL-U (28W) GT3 quad 8.5 64 64 + * CFL-U (28W) GT3 dual 8.5 64 64 * - * CFL-H (45W) GT2 hex 11.1 128 0 - * CFL-H (45W) GT2 quad 11.1 86 0 + * CFL-H (45W) GT2 hex 11.1 128 0 + * CFL-H (45W) GT2 quad 11.1 86 0 * - * CFL-S (95W) GT2 octa 11.1 193 45 + * CFL-S (95W) GT2 octa 11.1 193 45 * - * CFL-S (95W) GT2 hex 11.1 138 45 - * CFL-S (65W) GT2 hex 11.1 133 45 - * CFL-S (80W) GT2 hex 11.1 133 45 - * CFL-S (35W) GT2 hex 11.1 104 35 + * CFL-S (95W) GT2 hex 11.1 138 45 + * CFL-S (65W) GT2 hex 11.1 133 45 + * CFL-S (80W) GT2 hex 11.1 133 45 + * CFL-S (35W) GT2 hex 11.1 104 35 * - * CFL-S (91W) GT2 quad 11.1 100 45 - * CFL-S (83W) GT2 quad 11.1 100 45 - * CFL-S (71W) GT2 quad 11.1 100 45 - * CFL-S (65W) GT2 quad 11.1 79 45 - * CFL-S (62W) GT2 quad 11.1 79 45 - * CFL-S (35W) GT2 quad 11.1 66 35 + * CFL-S (91W) GT2 quad 11.1 100 45 + * CFL-S (83W) GT2 quad 11.1 100 45 + * CFL-S (71W) GT2 quad 11.1 100 45 + * CFL-S (65W) GT2 quad 11.1 79 45 + * CFL-S (62W) GT2 quad 11.1 79 45 + * CFL-S (35W) GT2 quad 11.1 66 35 * - * CFL-S (58W) GT2 dual 11.1 79 45 - * CFL-S (54W) GT2 dual 11.1 58 45 - * CFL-S (35W) GT2 dual 11.1 40 35 + * CFL-S (58W) GT2 dual 11.1 79 45 + * CFL-S (54W) GT2 dual 11.1 58 45 + * CFL-S (35W) GT2 dual 11.1 40 35 * - * CNL-U (15W) 13 34 0 + * CNL-U (15W) 13 34 0 * - * WHL-U (15W) GT2 quad 6 70 31 - * WHL-U (15W) GT2 dual 6 35 31 + * WHL-U (15W) GT2 quad 6 70 31 + * WHL-U (15W) GT2 dual 6 35 31 + * + * CML-S 10-Core (125W) GT2/0 11.1 245 35 + * CML-S 10-Core (65W) GT2/0 11.1 210 35 + * CML-S 10-Core (80W) GT2 11.1 210 35 + * CML-S 10-Core (35W) GT2 11.1 140 35 + * CML-S 8-Core (125W) GT2/0 11.1 245 35 + * CML-S 8-Core (65W) GT2/0 11.1 210 35 + * CML-S 8-Core (80W) GT2 11.1 210 35 + * CML-S 8-Core (35W) GT2 11.1 140 35 + * CML-S 6-Core (125/65/80W) 11.1 140 35 + * CML-S 6-Core (35W) GT2/0 11.1 104 35 + * CML-S 4-Core (65W) GT2 11.1 102 35 + * CML-S 4-Core (35W) GT2 11.1 65 35 + * CML-S 2-Core (58W) GT2/1 11.1 60 35 + * CML-S 2-Core (35W) GT2/1 11.1 55 35 * * GT0 versions are the same as GT2/GT3, but have GT/GTx set to 0. */ @@ -215,6 +231,39 @@ return icc_max[domain]; } + case PCI_DEVICE_ID_INTEL_CML_S_P0P1_10_2: /* fallthrough */ + case PCI_DEVICE_ID_INTEL_CML_S_P0P1_8_2: { + uint16_t icc_max[NUM_VR_DOMAINS] = VR_CFG_ALL_DOMAINS_ICC(11.1, 140, 35, 35); + if (tdp > 35) { + if (tdp >= 125) + icc_max[VR_IA_CORE] = VR_CFG_AMP(245); + else + icc_max[VR_IA_CORE] = VR_CFG_AMP(210); + } + + return icc_max[domain]; + } + case PCI_DEVICE_ID_INTEL_CML_S_G0G1_P0P1_6_2: { + uint16_t icc_max[NUM_VR_DOMAINS] = VR_CFG_ALL_DOMAINS_ICC(11.1, 104, 35, 35); + if (tdp > 35) + icc_max[VR_IA_CORE] = VR_CFG_AMP(140); + + return icc_max[domain]; + } + case PCI_DEVICE_ID_INTEL_CML_S_G0G1_4: { + uint16_t icc_max[NUM_VR_DOMAINS] = VR_CFG_ALL_DOMAINS_ICC(11.1, 65, 35, 35); + if (tdp > 35) + icc_max[VR_IA_CORE] = VR_CFG_AMP(102); + + return icc_max[domain]; + } + case PCI_DEVICE_ID_INTEL_CML_S_G0G1_2: { + uint16_t icc_max[NUM_VR_DOMAINS] = VR_CFG_ALL_DOMAINS_ICC(11.1, 55, 35, 35); + if (tdp > 35) + icc_max[VR_IA_CORE] = VR_CFG_AMP(60); + + return icc_max[domain]; + } default: printk(BIOS_ERR, "ERROR: Unknown MCH (0x%x) in VR-config\n", mch_id); } @@ -273,6 +322,27 @@ VR_CFG_ALL_DOMAINS_LOADLINE(10.3, 2.1, 3.1, 3.1); return loadline[domain]; } + case PCI_DEVICE_ID_INTEL_CML_S_P0P1_10_2: /* fallthrough */ + case PCI_DEVICE_ID_INTEL_CML_S_P0P1_8_2: { + uint16_t loadline[NUM_VR_DOMAINS] = + VR_CFG_ALL_DOMAINS_LOADLINE(10.3, 1.7, 4.0, 4.0); + const uint16_t tdp = cpu_get_power_max(); + if (tdp > 35) + loadline[VR_IA_CORE] = 1.1; + + return loadline[domain]; + } + case PCI_DEVICE_ID_INTEL_CML_S_G0G1_P0P1_6_2: /* fallthrough */ + case PCI_DEVICE_ID_INTEL_CML_S_G0G1_4: /* fallthrough */ + case PCI_DEVICE_ID_INTEL_CML_S_G0G1_2: { + uint16_t loadline[NUM_VR_DOMAINS] = + VR_CFG_ALL_DOMAINS_LOADLINE(10.3, 1.7, 4.0, 4.0); + const uint16_t tdp = cpu_get_power_max(); + if (tdp >= 125) + loadline[VR_IA_CORE] = 1.1; + + return loadline[domain]; + } default: printk(BIOS_ERR, "ERROR: Unknown MCH (0x%x) in VR-config\n", mch_id); } -- To view, visit https://review.coreboot.org/c/coreboot/+/38288 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id2797a979a8b6a52a34baae66f95c7136ed1dc72 Gerrit-Change-Number: 38288 Gerrit-PatchSet: 1 Gerrit-Owner: Gaggery Tsai <gaggery.tsai(a)intel.com> Gerrit-MessageType: newchange

6 11

Change in coreboot[master]: mainboards: add GIGABYTE P34G v2
by Daniel Maslowski (Code Review) 22 Dec '20

22 Dec '20

Daniel Maslowski has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36072 ) Change subject: mainboards: add GIGABYTE P34G v2 ...................................................................... mainboards: add GIGABYTE P34G v2 Change-Id: I5d83fbc4e402a9c0819947b8ea1ef2e480c3e5cb Signed-off-by: Daniel Maslowski <info(a)orangecms.org> --- M 3rdparty/blobs A src/mainboard/gigabyte/p34g-v2/Kconfig A src/mainboard/gigabyte/p34g-v2/Kconfig.name A src/mainboard/gigabyte/p34g-v2/Makefile.inc A src/mainboard/gigabyte/p34g-v2/acpi/ec.asl A src/mainboard/gigabyte/p34g-v2/acpi/platform.asl A src/mainboard/gigabyte/p34g-v2/acpi/superio.asl A src/mainboard/gigabyte/p34g-v2/acpi/thermal.asl A src/mainboard/gigabyte/p34g-v2/acpi_tables.c A src/mainboard/gigabyte/p34g-v2/board_info.txt A src/mainboard/gigabyte/p34g-v2/cmos.default A src/mainboard/gigabyte/p34g-v2/cmos.layout A src/mainboard/gigabyte/p34g-v2/devicetree.cb A src/mainboard/gigabyte/p34g-v2/dsdt.asl A src/mainboard/gigabyte/p34g-v2/gma-mainboard.ads A src/mainboard/gigabyte/p34g-v2/gpio.c A src/mainboard/gigabyte/p34g-v2/hda_verb.c A src/mainboard/gigabyte/p34g-v2/mainboard.c A src/mainboard/gigabyte/p34g-v2/romstage.c A src/mainboard/gigabyte/p34g-v2/thermal.h M src/southbridge/intel/lynxpoint/lpc.c 21 files changed, 1,093 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/72/36072/1 diff --git a/3rdparty/blobs b/3rdparty/blobs index 62aa0e0..5afdf04 160000 --- a/3rdparty/blobs +++ b/3rdparty/blobs @@ -1 +1 @@ -Subproject commit 62aa0e0c54295bbb7b1a3e5e73f960bafdb59d04 +Subproject commit 5afdf04b4fce5cff33d704d1b474fd9609cbab15 diff --git a/src/mainboard/gigabyte/p34g-v2/Kconfig b/src/mainboard/gigabyte/p34g-v2/Kconfig new file mode 100644 index 0000000..f625052 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/Kconfig @@ -0,0 +1,55 @@ +if BOARD_GIGABYTE_P34G_V2 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select CPU_INTEL_HASWELL + select NORTHBRIDGE_INTEL_HASWELL + select SOUTHBRIDGE_INTEL_LYNXPOINT + select INTEL_INT15 + select INTEL_GMA_HAVE_VBT + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_ACPI_RESUME + select EC_ACPI + select SUPERIO_ITE_IT8587E + select MAINBOARD_HAS_LIBGFXINIT + select SERIRQ_CONTINUOUS_MODE + select SYSTEM_TYPE_LAPTOP + select TSC_MONOTONIC_TIMER + +config MAINBOARD_DIR + string + default gigabyte/p34g-v2 + +config GFX_GMA_CPU_VARIANT + string + default "Normal" + +config MAINBOARD_PART_NUMBER + string + default "P34G_V2" + +config VGA_BIOS_FILE + string + default "pci8086,0416.rom" + +config VGA_BIOS_ID + string + default "8086,0416" + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0xa456 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x1458 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX # FIXME: check this + int + default 2 +endif diff --git a/src/mainboard/gigabyte/p34g-v2/Kconfig.name b/src/mainboard/gigabyte/p34g-v2/Kconfig.name new file mode 100644 index 0000000..e6a7665 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_GIGABYTE_P34G_V2 + bool "P34G_V2" diff --git a/src/mainboard/gigabyte/p34g-v2/Makefile.inc b/src/mainboard/gigabyte/p34g-v2/Makefile.inc new file mode 100644 index 0000000..ebe01ae --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/Makefile.inc @@ -0,0 +1,2 @@ +romstage-y += gpio.c +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/gigabyte/p34g-v2/acpi/ec.asl b/src/mainboard/gigabyte/p34g-v2/acpi/ec.asl new file mode 100644 index 0000000..aa083da --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/acpi/ec.asl @@ -0,0 +1,22 @@ +Device(EC) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 0) + Name (_GPE, 23) + Device (BAT0) + { + Name (_HID, EisaId ("PNP0C0A") /* Control Method Battery */) // _HID: Hardware ID + Name (_UID, Zero) // _UID: Unique ID + Method (_STA, 0, NotSerialized) // _STA: Status + { + /* vendor: + If ((BNUM & One)) + { + Return (0x1F) + } + Return (0x0B) + */ + Return (Zero) + } + } +} diff --git a/src/mainboard/gigabyte/p34g-v2/acpi/platform.asl b/src/mainboard/gigabyte/p34g-v2/acpi/platform.asl new file mode 100644 index 0000000..c2862c9 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/acpi/platform.asl @@ -0,0 +1,10 @@ +Method(_WAK,1) +{ + /* FIXME: EC support */ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ + /* FIXME: EC support */ +} diff --git a/src/mainboard/gigabyte/p34g-v2/acpi/superio.asl b/src/mainboard/gigabyte/p34g-v2/acpi/superio.asl new file mode 100644 index 0000000..f2b35ba --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/acpi/superio.asl @@ -0,0 +1 @@ +#include <drivers/pc80/pc/ps2_controller.asl> diff --git a/src/mainboard/gigabyte/p34g-v2/acpi/thermal.asl b/src/mainboard/gigabyte/p34g-v2/acpi/thermal.asl new file mode 100644 index 0000000..93421d2 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/acpi/thermal.asl @@ -0,0 +1,109 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// Thermal Zone + +External (\PPKG, MethodObj) + +#define HAVE_THERMALZONE +Scope (\_TZ) +{ + ThermalZone (THRM) + { + Name (_TC1, 0x08) + Name (_TC2, 0x08) + + // Ignore critical temps for the first few reads + // at boot to prevent unexpected shutdown + Name (IRDC, 4) + Name (CRDC, 0) + + // Thermal zone polling frequency: 10 seconds + Name (_TZP, 100) + + // Thermal sampling period for passive cooling: 2 seconds + Name (_TSP, 20) + + // Convert from Degrees C to 1/10 Kelvin for ACPI + Method (CTOK, 1) { + // 10th of Degrees C + Multiply (Arg0, 10, Local0) + + // Convert to Kelvin + Add (Local0, 2732, Local0) + + Return (Local0) + } + + // Threshold for OS to shutdown + Method (_CRT, 0, Serialized) + { + Return (CTOK (\TCRT)) + } + + // Threshold for passive cooling + Method (_PSV, 0, Serialized) + { + Return (CTOK (\TPSV)) + } + + // Processors used for passive cooling + Method (_PSL, 0, Serialized) + { + Return (\PPKG ()) + } +/* + Method (_AC0) { + If (LLessEqual (\FLVL, 0)) { + Return (CTOK (\F0OF)) + } Else { + Return (CTOK (\F0ON)) + } + } + + Method (_AC1) { + If (LLessEqual (\FLVL, 1)) { + Return (CTOK (\F1OF)) + } Else { + Return (CTOK (\F1ON)) + } + } + + Method (_AC2) { + If (LLessEqual (\FLVL, 2)) { + Return (CTOK (\F2OF)) + } Else { + Return (CTOK (\F2ON)) + } + } + + Method (_AC3) { + If (LLessEqual (\FLVL, 3)) { + Return (CTOK (\F3OF)) + } Else { + Return (CTOK (\F3ON)) + } + } + + Method (_AC4) { + If (LLessEqual (\FLVL, 4)) { + Return (CTOK (\F4OF)) + } Else { + Return (CTOK (\F4ON)) + } + } +*/ + } +} diff --git a/src/mainboard/gigabyte/p34g-v2/acpi_tables.c b/src/mainboard/gigabyte/p34g-v2/acpi_tables.c new file mode 100644 index 0000000..f5e30b6 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/acpi_tables.c @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/lynxpoint/nvs.h> + +#include "thermal.h" + +static global_nvs_t *gnvs_; + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->f4of = FAN4_THRESHOLD_OFF; + gnvs->f4on = FAN4_THRESHOLD_ON; + + gnvs->f3of = FAN3_THRESHOLD_OFF; + gnvs->f3on = FAN3_THRESHOLD_ON; + + gnvs->f2of = FAN2_THRESHOLD_OFF; + gnvs->f2on = FAN2_THRESHOLD_ON; + + gnvs->f1of = FAN1_THRESHOLD_OFF; + gnvs->f1on = FAN1_THRESHOLD_ON; + + gnvs->f0of = FAN0_THRESHOLD_OFF; + gnvs->f0on = FAN0_THRESHOLD_ON; + + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; + gnvs->tmax = MAX_TEMPERATURE; + gnvs->flvl = 5; // Fan level +} + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + gnvs_ = gnvs; + + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; + + acpi_update_thermal_table(gnvs); +} diff --git a/src/mainboard/gigabyte/p34g-v2/board_info.txt b/src/mainboard/gigabyte/p34g-v2/board_info.txt new file mode 100644 index 0000000..9135e44 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/board_info.txt @@ -0,0 +1,8 @@ +Category: laptop +Board URL: https://www.gigabyte.com/Laptop/P34G-v2 +Board name: Gigabyte P34G v2 GA-R3456R +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y +Release year: 2013 diff --git a/src/mainboard/gigabyte/p34g-v2/cmos.default b/src/mainboard/gigabyte/p34g-v2/cmos.default new file mode 100644 index 0000000..f404714 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/cmos.default @@ -0,0 +1,5 @@ +boot_option=Fallback +debug_level=Debug +nmi=Enable +power_on_after_fail=Keep +hide_ast2400=Disable diff --git a/src/mainboard/gigabyte/p34g-v2/cmos.layout b/src/mainboard/gigabyte/p34g-v2/cmos.layout new file mode 100644 index 0000000..cce1f18 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/cmos.layout @@ -0,0 +1,97 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2014 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +# Status Register A +# ----------------------------------------------------------------- +# Status Register B +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 3 boot_option +388 4 h 0 reboot_counter + +# ----------------------------------------------------------------- +# coreboot config options: console +#392 3 r 0 unused +395 4 e 4 debug_level +#399 1 r 0 unused + +#400 8 r 0 reserved for century byte + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 5 power_on_after_fail + +# coreboot config options: mainboard +416 1 e 1 hide_ast2400 + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable + +2 0 Enable +2 1 Disable + +3 0 Fallback +3 1 Normal + +4 0 Emergency +4 1 Alert +4 2 Critical +4 3 Error +4 4 Warning +4 5 Notice +4 6 Info +4 7 Debug +4 8 Spew + +5 0 Disable +5 1 Enable +5 2 Keep + +# ----------------------------------------------------------------- +checksums + +checksum 392 423 984 diff --git a/src/mainboard/gigabyte/p34g-v2/devicetree.cb b/src/mainboard/gigabyte/p34g-v2/devicetree.cb new file mode 100644 index 0000000..063ff5d --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/devicetree.cb @@ -0,0 +1,142 @@ +chip northbridge/intel/haswell # FIXME: check gfx.ndid and gfx.did + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" + register "gfx.ndid" = "3" + + register "gpu_cpu_backlight" = "0x00000200" + register "gpu_pch_backlight" = "0x04000000" + + register "gpu_ddi_e_connected" = "1" + register "gpu_dp_b_hotplug" = "0x06" + register "gpu_dp_c_hotplug" = "0x00" + register "gpu_dp_d_hotplug" = "0x06" + register "gpu_panel_port_select" = "0" + + # register value in hex: 6h for 500ms, i.e., (6-1)*100 - power_off_time + register "gpu_panel_power_cycle_delay" = "6" # T12 + register "gpu_panel_power_up_delay" = "2000" # T3 + register "gpu_panel_power_down_delay" = "5000" # T10 + register "gpu_panel_power_backlight_on_delay" = "70" # T7 + register "gpu_panel_power_backlight_off_delay" = "2100" # T9 + + device cpu_cluster 0x0 on + chip cpu/intel/haswell + device lapic 0x0 on end + device lapic 0xacac off end + + register "c1_acpower" = "1" + register "c2_acpower" = "3" + register "c3_acpower" = "5" + + register "c1_battery" = "1" + register "c2_battery" = "3" + register "c3_battery" = "5" + end + end + + device domain 0x0 on + chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point PCH + register "gen1_dec" = "0x00000061" + register "gen2_dec" = "0x00040069" + register "gen3_dec" = "0x00000000" + register "gen4_dec" = "0x00000000" + register "gpi7_routing" = "2" + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x03" + register "pirqc_routing" = "0x04" + register "pirqd_routing" = "0x0a" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x05" + register "pirqh_routing" = "0x0b" + register "sata_ahci" = "1" + register "sata_port_map" = "0x3" + device pci 14.0 on # xHCI Controller + subsystemid 0x1458 0xa456 + end + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x1458 0xa456 + end + device pci 16.1 off # Management Engine Interface 2 + end + device pci 16.2 off # Management Engine IDE-R + end + device pci 16.3 off # Management Engine KT + end + # device pci 19.0 off # Intel Gigabit Ethernet # FIXME + # end + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x1458 0xa456 + end + device pci 1b.0 on # High Definition Audio Audio controller + subsystemid 0x1458 0xa456 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x1458 0xa456 + end + device pci 1c.1 on # PCIe Port #2 + subsystemid 0x1458 0xa456 + end + device pci 1c.2 on # PCIe Port #3 + subsystemid 0x1458 0xa456 + end + device pci 1c.3 off # PCIe Port #4 + end + device pci 1c.4 off # PCIe Port #5 + end + device pci 1c.5 off # PCIe Port #6 + end + device pci 1c.6 off # PCIe Port #7 + end + device pci 1c.7 off # PCIe Port #8 + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x1458 0xa456 + end + device pci 1f.0 on # LPC bridge PCI-LPC bridge + subsystemid 0x1458 0xa456 + chip superio/ite/it8587e + # 0x4e according to superiotool.log + device pnp 4e.1 off end # UART 1 + device pnp 4e.2 off end # UART 2 + device pnp 4e.4 off end # sys wakeup + device pnp 4e.5 off end # mouse + device pnp 4e.6 on # keyboard FIXME: works? + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 4e.f off end # shared mem + device pnp 4e.10 off end # RTC + device pnp 4e.11 off end # PM1 + device pnp 4e.12 off end # PM2 + device pnp 4e.13 off end # SPI + device pnp 4e.17 off end # PM3 + end + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x1458 0xa456 + end + device pci 1f.3 on # SMBus + subsystemid 0x1458 0xa456 + end + # device pci 1f.5 off # SATA Controller 2 # FIXME + # end + device pci 1f.6 on # Thermal + subsystemid 0x1458 0xa456 + end + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x1458 0xa456 + end + device pci 01.0 on # PCIe Bridge for discrete graphics Unsupported PCI device 8086:0c01 + subsystemid 0x1458 0xa456 + end + device pci 02.0 on # Internal graphics VGA controller + subsystemid 0x1458 0xa456 + end + device pci 03.0 on # Mini-HD audio Audio controller + subsystemid 0x8086 0x2010 + end + end +end diff --git a/src/mainboard/gigabyte/p34g-v2/dsdt.asl b/src/mainboard/gigabyte/p34g-v2/dsdt.asl new file mode 100644 index 0000000..47ee50c --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/dsdt.asl @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB +#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0 + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + /* Some generic macros */ + #include "acpi/platform.asl" + + /* Super I/O, EC */ + #include "acpi/superio.asl" + #include "acpi/ec.asl" + + /* Thermal handler */ + #include "acpi/thermal.asl" + + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/lynxpoint/acpi/platform.asl> + + /* global NVS and variables. */ + #include <southbridge/intel/lynxpoint/acpi/globalnvs.asl> + #include <southbridge/intel/lynxpoint/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/haswell/acpi/haswell.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/lynxpoint/acpi/pch.asl> + } +} diff --git a/src/mainboard/gigabyte/p34g-v2/gma-mainboard.ads b/src/mainboard/gigabyte/p34g-v2/gma-mainboard.ads new file mode 100644 index 0000000..8a72a31 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/gma-mainboard.ads @@ -0,0 +1,30 @@ +-- +-- This file is part of the coreboot project. +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (DP1, + HDMI1, + Analog, + Internal, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/gigabyte/p34g-v2/gpio.c b/src/mainboard/gigabyte/p34g-v2/gpio.c new file mode 100644 index 0000000..a700291 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/gpio.c @@ -0,0 +1,226 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_NATIVE, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_NATIVE, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_NATIVE, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_NATIVE, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_LOW, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_HIGH, + .gpio28 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio8 = GPIO_RESET_RSMRST, + .gpio24 = GPIO_RESET_RSMRST, + .gpio30 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio3 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio14 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_NATIVE, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_GPIO, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_OUTPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio50 = GPIO_DIR_OUTPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_LOW, + .gpio35 = GPIO_LEVEL_HIGH, + .gpio37 = GPIO_LEVEL_LOW, + .gpio46 = GPIO_LEVEL_LOW, + .gpio50 = GPIO_LEVEL_LOW, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_HIGH, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_HIGH, + .gpio55 = GPIO_LEVEL_LOW, + .gpio60 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { + .gpio46 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_GPIO, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, + .gpio66 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/gigabyte/p34g-v2/hda_verb.c b/src/mainboard/gigabyte/p34g-v2/hda_verb.c new file mode 100644 index 0000000..c2cb5a0 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/hda_verb.c @@ -0,0 +1,40 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x80862807, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + + 0x00000004, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x80860101), + + /* NID 0x05. */ + AZALIA_PIN_CFG(0x0, 0x05, 0x18560010), + + /* NID 0x06. */ + AZALIA_PIN_CFG(0x0, 0x06, 0x18560010), + + /* NID 0x07. */ + AZALIA_PIN_CFG(0x0, 0x07, 0x18560010), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/gigabyte/p34g-v2/mainboard.c b/src/mainboard/gigabyte/p34g-v2/mainboard.c new file mode 100644 index 0000000..be4a5aa --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/mainboard.c @@ -0,0 +1,50 @@ +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <ec/acpi/ec.h> +#include <console/console.h> +#include <pc80/keyboard.h> + +static void mainboard_init(struct device *dev) +{ + /* FIXME: trim this down or remove if necessary */ + { + int i; + const u8 dmp[256] = { + /* 00 */ 0x0a, 0xe3, 0x5b, 0xa0, 0x80, 0x40, 0x60, 0x00, 0x00, 0x01, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, + /* 10 */ 0x54, 0x10, 0xa7, 0x0c, 0xdb, 0x0b, 0x2c, 0x42, 0xa2, 0x01, 0x65, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 20 */ 0x60, 0x3b, 0x00, 0x00, 0x9a, 0x0b, 0x01, 0x01, 0x00, 0x00, 0x55, 0x34, 0x4e, 0x00, 0x00, 0x00, + /* 30 */ 0x47, 0x42, 0x54, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 40 */ 0x00, 0x00, 0x00, 0x00, 0x55, 0x34, 0x4e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 50 */ 0x00, 0x00, 0x00, 0x00, 0xa7, 0x0c, 0x54, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 60 */ 0x3a, 0x37, 0x3a, 0x03, 0x00, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x0b, 0xdb, + /* 70 */ 0x00, 0x65, 0x00, 0x00, 0x0c, 0xa7, 0x00, 0x00, 0x0b, 0x9a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14, + /* 80 */ 0x01, 0x44, 0x02, 0x87, 0x03, 0xcb, 0x05, 0x0f, 0x06, 0x53, 0x0c, 0x05, 0x00, 0x00, 0x00, 0x00, + /* 90 */ 0x98, 0x00, 0x00, 0x15, 0x00, 0x00, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, + /* a0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* b0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* c0 */ 0x00, 0x44, 0x00, 0x08, 0x00, 0x10, 0x00, 0x20, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* d0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* e0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* f0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }; + + printk(BIOS_DEBUG, "Replaying EC dump ..."); + for (i = 0; i < 256; i++) + ec_write (i, dmp[i]); + printk(BIOS_DEBUG, "done\n"); + } + pc_keyboard_init(NO_AUX_DEVICE); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, + GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/gigabyte/p34g-v2/romstage.c b/src/mainboard/gigabyte/p34g-v2/romstage.c new file mode 100644 index 0000000..7e09a49 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/romstage.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <arch/romstage.h> +#include <cpu/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/haswell.h> +#include <northbridge/intel/haswell/raminit.h> +#include <southbridge/intel/common/gpio.h> +#include <southbridge/intel/lynxpoint/pch.h> + +// root complex base addresses +static const struct rcba_config_instruction rcba_config[] = { + /* Device interrupt route registers */ + RCBA_SET_REG_16(D31IR, DIR_ROUTE(PIRQA, PIRQD, PIRQC, PIRQA)), + RCBA_SET_REG_16(D29IR, DIR_ROUTE(PIRQH, PIRQD, PIRQA, PIRQC)), + RCBA_SET_REG_16(D28IR, DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)), + RCBA_SET_REG_16(D27IR, DIR_ROUTE(PIRQG, PIRQB, PIRQC, PIRQD)), + RCBA_SET_REG_16(D26IR, DIR_ROUTE(PIRQA, PIRQF, PIRQC, PIRQD)), + RCBA_SET_REG_16(D25IR, DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH)), + RCBA_SET_REG_16(D22IR, DIR_ROUTE(PIRQA, PIRQD, PIRQC, PIRQB)), + RCBA_SET_REG_16(D20IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + + /* Disable unused devices (board specific, copied from Beltino) */ + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +}; + +void mainboard_config_superio(void) +{ +} + +void mainboard_romstage_entry() +{ + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = (uintptr_t)DEFAULT_MCHBAR, + .dmibar = (uintptr_t)DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = HPET_ADDR, + .rcba = (uintptr_t)DEFAULT_RCBA, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .temp_mmio_base = 0xfed08000, + .system_type = 1, /* desktop/server */ + .tseg_size = CONFIG_SMM_TSEG_SIZE, + // left-shifted by 1 for mrc.bin + .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, + .ec_present = 0, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + .dimm_channel0_disabled = 2, + .dimm_channel1_disabled = 2, + .max_ddr3_freq = 1600, + .usb2_ports = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 1, USB_PORT_BACK_PANEL }, + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 2, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, + }, + .usb3_ports = { + { 1, 0 }, + { 1, 0 }, + { 1, 1 }, + { 1, 1 }, + { 1, 2 }, + { 1, 2 }, + }, + }; + + struct romstage_params romstage_params = { + .pei_data = &pei_data, + .gpio_map = &mainboard_gpio_map, + .rcba_config = &rcba_config[0], + }; + + /* SuperIO */ + pch_enable_lpc(); + + /* Main romstage entry */ + romstage_common(&romstage_params); +} diff --git a/src/mainboard/gigabyte/p34g-v2/thermal.h b/src/mainboard/gigabyte/p34g-v2/thermal.h new file mode 100644 index 0000000..210c702 --- /dev/null +++ b/src/mainboard/gigabyte/p34g-v2/thermal.h @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// taken from Samsung / lumpy +#ifndef P34V2_THERMAL_H +#define P34V2_THERMAL_H + +/* Fan is OFF */ +#define FAN4_THRESHOLD_OFF 0 +#define FAN4_THRESHOLD_ON 0 + +/* Fan is at LOW speed */ +#define FAN3_THRESHOLD_OFF 40 +#define FAN3_THRESHOLD_ON 44 + +/* Fan is at MEDIUM speed */ +#define FAN2_THRESHOLD_OFF 44 +#define FAN2_THRESHOLD_ON 48 + +/* Fan is at HIGH speed */ +#define FAN1_THRESHOLD_OFF 48 +#define FAN1_THRESHOLD_ON 54 + +/* Fan is at FULL speed */ +#define FAN0_THRESHOLD_OFF 54 +#define FAN0_THRESHOLD_ON 78 + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 100 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 80 + +/* Tj_max value for calculating PECI CPU temperature */ +#define MAX_TEMPERATURE 100 + +#endif diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c index 28e3544..c1b3c50 100644 --- a/src/southbridge/intel/lynxpoint/lpc.c +++ b/src/southbridge/intel/lynxpoint/lpc.c @@ -962,8 +962,16 @@ { spi_finalize_ops(); - if (acpi_is_wakeup_s3() || CONFIG(INTEL_CHIPSET_LOCKDOWN)) + if (acpi_is_wakeup_s3() || CONFIG(INTEL_CHIPSET_LOCKDOWN)) { outb(APM_CNT_FINALIZE, APM_CNT); + if (CONFIG(CONSOLE_SPI_FLASH)) { + /* Re-init SPI driver to handle locked BAR. + This prevents flashconsole from hanging. + If other code needs to use SPI during + ramstage, whitelist it here. */ + spi_init(); + } + } } static struct pci_operations pci_ops = { -- To view, visit https://review.coreboot.org/c/coreboot/+/36072 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I5d83fbc4e402a9c0819947b8ea1ef2e480c3e5cb Gerrit-Change-Number: 36072 Gerrit-PatchSet: 1 Gerrit-Owner: Daniel Maslowski <info(a)orangecms.org> Gerrit-Reviewer: Daniel Maslowski <info(a)orangecms.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

2 4

Change in coreboot[master]: [WIP]drivers: Replace set_vbe_mode_info_valid
by Patrick Rudolph (Code Review) 17 Dec '20

17 Dec '20

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39004 ) Change subject: [WIP]drivers: Replace set_vbe_mode_info_valid ...................................................................... [WIP]drivers: Replace set_vbe_mode_info_valid Replace set_vbe_mode_info_valid with fb_fill_framebuffer_info, as it doesn't need a complete edid struct s paramter. The platforms doesn't read an EDID anyway. Change-Id: I95d1d62385a201c68c6c2527c023ad2292a235c5 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/drivers/aspeed/common/ast_mode_corebootfb.c M src/drivers/emulation/qemu/bochs.c M src/drivers/emulation/qemu/cirrus.c M src/mainboard/emulation/qemu-armv7/mainboard.c M src/soc/nvidia/tegra210/dc.c 5 files changed, 33 insertions(+), 43 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/04/39004/1 diff --git a/src/drivers/aspeed/common/ast_mode_corebootfb.c b/src/drivers/aspeed/common/ast_mode_corebootfb.c index 2ec85ac..fed7754 100644 --- a/src/drivers/aspeed/common/ast_mode_corebootfb.c +++ b/src/drivers/aspeed/common/ast_mode_corebootfb.c @@ -30,6 +30,7 @@ */ #include <edid.h> +#include <framebuffer_info.h> #include "ast_drv.h" @@ -247,7 +248,12 @@ ast_hide_cursor(&crtc); /* Advertise new mode */ - set_vbe_mode_info_valid(&edid, fb.mmio_addr); + struct edid_fb_info *info = fb_new_framebuffer_info(); + if (info) { + fb_fill_framebuffer_info(info, fb.mmio_addr, edid.x_resolution, + edid.y_resolution, edid.bytes_per_line, + edid.framebuffer_bits_per_pixel); + } /* Clear display */ memset((void *)fb.mmio_addr, 0, edid.bytes_per_line * edid.y_resolution); diff --git a/src/drivers/emulation/qemu/bochs.c b/src/drivers/emulation/qemu/bochs.c index d9e4ce1..959d431 100644 --- a/src/drivers/emulation/qemu/bochs.c +++ b/src/drivers/emulation/qemu/bochs.c @@ -12,7 +12,6 @@ */ #include <stdint.h> -#include <edid.h> #include <arch/io.h> #include <console/console.h> #include <device/device.h> @@ -20,6 +19,7 @@ #include <device/pci_ops.h> #include <pc80/vga.h> #include <pc80/vga_io.h> +#include <framebuffer_info.h> /* VGA init. We use the Bochs VESA VBE extensions */ #define VBE_DISPI_IOPORT_INDEX 0x01CE @@ -65,7 +65,6 @@ static void bochs_init_linear_fb(struct device *dev) { - struct edid edid; int id, mem, bar; u32 addr; @@ -112,13 +111,11 @@ outb(0x20, 0x3c0); /* disable blanking */ - /* setup coreboot framebuffer */ - edid.mode.ha = width; - edid.mode.va = height; - edid.panel_bits_per_color = 8; - edid.panel_bits_per_pixel = 24; - edid_set_framebuffer_bits_per_pixel(&edid, 32, 0); - set_vbe_mode_info_valid(&edid, addr); + /* Advertise new mode */ + struct edid_fb_info *info = fb_new_framebuffer_info(); + if (info) { + fb_fill_framebuffer_info(info, addr, width, height, 4 * width, 24); + } } static void bochs_init_text_mode(struct device *dev) diff --git a/src/drivers/emulation/qemu/cirrus.c b/src/drivers/emulation/qemu/cirrus.c index 6b1968c..8f048f9 100644 --- a/src/drivers/emulation/qemu/cirrus.c +++ b/src/drivers/emulation/qemu/cirrus.c @@ -13,13 +13,13 @@ */ #include <stdint.h> -#include <edid.h> #include <console/console.h> #include <device/device.h> #include <device/pci.h> #include <device/pci_ops.h> #include <pc80/vga.h> #include <pc80/vga_io.h> +#include <framebuffer_info.h> static int width = CONFIG_DRIVERS_EMULATION_QEMU_BOCHS_XRES; static int height = CONFIG_DRIVERS_EMULATION_QEMU_BOCHS_YRES; @@ -311,14 +311,10 @@ vga_sr_write (CIRRUS_SR_EXTENDED_MODE, sr_ext); write_hidden_dac (hidden_dac); - - struct edid edid; - edid.mode.ha = width; - edid.mode.va = height; - edid.panel_bits_per_color = 8; - edid.panel_bits_per_pixel = 24; - edid_set_framebuffer_bits_per_pixel(&edid, 32, 0); - set_vbe_mode_info_valid(&edid, addr); + struct edid_fb_info *info = fb_new_framebuffer_info(); + if (info) { + fb_fill_framebuffer_info(info, addr, width, height, 4 * width, 24); + } } static void cirrus_init_text_mode(struct device *dev) diff --git a/src/mainboard/emulation/qemu-armv7/mainboard.c b/src/mainboard/emulation/qemu-armv7/mainboard.c index 338cff9..22340b2 100644 --- a/src/mainboard/emulation/qemu-armv7/mainboard.c +++ b/src/mainboard/emulation/qemu-armv7/mainboard.c @@ -18,15 +18,14 @@ #include <device/device.h> #include <cbmem.h> #include <halt.h> -#include <edid.h> #include <device/mmio.h> #include <ramdetect.h> #include <symbols.h> +#include <framebuffer_info.h> static void init_gfx(void) { uint32_t *pl111; - struct edid edid; /* width is at most 4096 */ /* height is at most 1024 */ int width = 800, height = 600; @@ -42,12 +41,10 @@ write32(pl111 + 10, 0xff); write32(pl111 + 6, (5 << 1) | 0x801); - edid.framebuffer_bits_per_pixel = 32; - edid.bytes_per_line = width * 4; - edid.x_resolution = width; - edid.y_resolution = height; - - set_vbe_mode_info_valid(&edid, framebuffer); + struct edid_fb_info *info = fb_new_framebuffer_info(); + if (info) { + fb_fill_framebuffer_info(info, framebuffer, width, height, 4 * width, 32); + } } static void mainboard_enable(struct device *dev) diff --git a/src/soc/nvidia/tegra210/dc.c b/src/soc/nvidia/tegra210/dc.c index 46443cf..b4e3378 100644 --- a/src/soc/nvidia/tegra210/dc.c +++ b/src/soc/nvidia/tegra210/dc.c @@ -16,10 +16,10 @@ #include <console/console.h> #include <device/mmio.h> #include <stdint.h> -#include <edid.h> #include <device/device.h> #include <soc/nvidia/tegra/dc.h> #include <soc/display.h> +#include <framebuffer_info.h> #include "chip.h" @@ -226,19 +226,13 @@ void pass_mode_info_to_payload( struct soc_nvidia_tegra210_config *config) { - struct edid edid; - - edid.mode.va = config->display_yres; - edid.mode.ha = config->display_xres; - edid_set_framebuffer_bits_per_pixel(&edid, - config->framebuffer_bits_per_pixel, 64); - - printk(BIOS_INFO, "%s: bytes_per_line: %d, bits_per_pixel: %d\n " - " x_res x y_res: %d x %d, size: %d\n", - __func__, edid.bytes_per_line, - edid.framebuffer_bits_per_pixel, - edid.x_resolution, edid.y_resolution, - (edid.bytes_per_line * edid.y_resolution)); - - set_vbe_mode_info_valid(&edid, 0); + struct edid_fb_info *info = fb_new_framebuffer_info(); + if (info) { + uint32_t bytes_per_line = ALIGN_UP(config->display_xres * + DIV_ROUND_UP(config->framebuffer_bits_per_pixel, 8), 64); + //FIXME: Why not config->framebuffer_base? + fb_fill_framebuffer_info(info, 0, + config->display_xres, config->display_yres, + bytes_per_line, config->framebuffer_bits_per_pixel); + } } -- To view, visit https://review.coreboot.org/c/coreboot/+/39004 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I95d1d62385a201c68c6c2527c023ad2292a235c5 Gerrit-Change-Number: 39004 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

9 47

Change in coreboot[master]: cbfs: Enable CBFS mcache on (almost) all boards
by Julius Werner (Code Review) 14 Dec '20

14 Dec '20

Hello Aaron Durbin, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/38424 to review the following change. Change subject: cbfs: Enable CBFS mcache on (almost) all boards ...................................................................... cbfs: Enable CBFS mcache on (almost) all boards This patch flips the default of CONFIG_NO_CBFS_MCACHE so the feature is enabled by default. Only a few boards with notoriously little space still have it explicitly disabled. All others get the new section added to their memlayout... 8K seems like a sane default to start with. Change-Id: I0abd1c813aece6e78fb883f292ce6c9319545c44 Signed-off-by: Julius Werner <jwerner(a)chromium.org> --- M src/arch/x86/Kconfig M src/arch/x86/car.ld M src/cpu/ti/am335x/memlayout.ld M src/lib/Kconfig M src/mainboard/emulation/qemu-aarch64/memlayout.ld M src/mainboard/emulation/qemu-armv7/memlayout.ld M src/mainboard/emulation/qemu-power8/memlayout.ld M src/mainboard/emulation/qemu-riscv/memlayout.ld M src/mainboard/emulation/spike-riscv/memlayout.ld M src/mainboard/google/octopus/Kconfig M src/soc/cavium/cn81xx/include/soc/memlayout.ld M src/soc/mediatek/mt8173/include/soc/memlayout.ld M src/soc/mediatek/mt8183/include/soc/memlayout.ld M src/soc/nvidia/tegra124/include/soc/memlayout.ld M src/soc/nvidia/tegra210/include/soc/memlayout.ld M src/soc/qualcomm/ipq40xx/include/soc/memlayout.ld M src/soc/qualcomm/ipq806x/include/soc/memlayout.ld M src/soc/qualcomm/qcs405/include/soc/memlayout.ld M src/soc/qualcomm/sc7180/include/soc/memlayout.ld M src/soc/qualcomm/sdm845/include/soc/memlayout.ld M src/soc/rockchip/rk3288/Kconfig M src/soc/rockchip/rk3399/include/soc/memlayout.ld M src/soc/samsung/exynos5250/include/soc/memlayout.ld M src/soc/samsung/exynos5420/include/soc/memlayout.ld M src/soc/sifive/fu540/include/soc/memlayout.ld 25 files changed, 51 insertions(+), 20 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/38424/1 diff --git a/src/arch/x86/Kconfig b/src/arch/x86/Kconfig index 1c55bdb..7cf049d 100644 --- a/src/arch/x86/Kconfig +++ b/src/arch/x86/Kconfig @@ -155,6 +155,13 @@ help Increase this value if preram cbmem console is getting truncated +config CBFS_MCACHE_SIZE + hex + depends on !NO_CBFS_MCACHE + default 0x2000 + help + Increase this value if you see CBFS mcache overflow warnings + config PC80_SYSTEM bool default y if ARCH_X86 diff --git a/src/arch/x86/car.ld b/src/arch/x86/car.ld index 2e29112..52e081a 100644 --- a/src/arch/x86/car.ld +++ b/src/arch/x86/car.ld @@ -60,6 +60,9 @@ #if !CONFIG(NO_FMAP_CACHE) FMAP_CACHE(., FMAP_SIZE) #endif +#if !CONFIG(NO_CBFS_MCACHE) + CBFS_MCACHE(., CONFIG_CBFS_MCACHE_SIZE) +#endif _car_ehci_dbg_info = .; /* Reserve sizeof(struct ehci_dbg_info). */ diff --git a/src/cpu/ti/am335x/memlayout.ld b/src/cpu/ti/am335x/memlayout.ld index f69a315..9bc7b75 100644 --- a/src/cpu/ti/am335x/memlayout.ld +++ b/src/cpu/ti/am335x/memlayout.ld @@ -19,7 +19,8 @@ { DRAM_START(0x40000000) BOOTBLOCK(0x402f0400, 20K) - ROMSTAGE(0x402f5400, 88K) + ROMSTAGE(0x402f5400, 80K) + CBFS_MCACHE(0x40309400, 8K) FMAP_CACHE(0x4030b400, 2K) STACK(0x4030be00, 4K) RAMSTAGE(0x80200000, 192K) diff --git a/src/lib/Kconfig b/src/lib/Kconfig index 26bf0be..4d2bf80 100644 --- a/src/lib/Kconfig +++ b/src/lib/Kconfig @@ -78,7 +78,6 @@ config NO_CBFS_MCACHE bool - default y help Disables the CBFS metadata cache. This means that your platform does not need to provide a CBFS_MCACHE section in memlayout and can save diff --git a/src/mainboard/emulation/qemu-aarch64/memlayout.ld b/src/mainboard/emulation/qemu-aarch64/memlayout.ld index aba4205..544f89f 100644 --- a/src/mainboard/emulation/qemu-aarch64/memlayout.ld +++ b/src/mainboard/emulation/qemu-aarch64/memlayout.ld @@ -24,7 +24,8 @@ DRAM_START(0x40000000) BOOTBLOCK(0x60010000, 64K) - STACK(0x60020000, 62K) + STACK(0x60020000, 54K) + CBFS_MCACHE(0x6002D800, 8K) FMAP_CACHE(0x6002F800, 2K) ROMSTAGE(0x60030000, 128K) RAMSTAGE(0x60070000, 16M) diff --git a/src/mainboard/emulation/qemu-armv7/memlayout.ld b/src/mainboard/emulation/qemu-armv7/memlayout.ld index 2b33cb3..de09cbb 100644 --- a/src/mainboard/emulation/qemu-armv7/memlayout.ld +++ b/src/mainboard/emulation/qemu-armv7/memlayout.ld @@ -43,6 +43,7 @@ BOOTBLOCK(0x00000, 64K) FMAP_CACHE(0x10000, 2K) + CBFS_MCACHE(0x10800, 8K) DRAM_START(0x60000000) STACK(0x60000000, 64K) diff --git a/src/mainboard/emulation/qemu-power8/memlayout.ld b/src/mainboard/emulation/qemu-power8/memlayout.ld index c22d3e4..81fe7f4 100644 --- a/src/mainboard/emulation/qemu-power8/memlayout.ld +++ b/src/mainboard/emulation/qemu-power8/memlayout.ld @@ -27,5 +27,6 @@ STACK(0x40000, 0x3ff00) PRERAM_CBMEM_CONSOLE(0x80000, 8K) FMAP_CACHE(0x82000, 2K) + CBFS_MCACHE(0x82800, 8K) RAMSTAGE(0x100000, 16M) } diff --git a/src/mainboard/emulation/qemu-riscv/memlayout.ld b/src/mainboard/emulation/qemu-riscv/memlayout.ld index e53df38..7eb0f00 100644 --- a/src/mainboard/emulation/qemu-riscv/memlayout.ld +++ b/src/mainboard/emulation/qemu-riscv/memlayout.ld @@ -38,6 +38,7 @@ #endif PRERAM_CBMEM_CONSOLE(STAGES_START + 128K, 8K) FMAP_CACHE(STAGES_START + 136K, 2K) + CBFS_MCACHE(STAGES_START + 138K, 8K) RAMSTAGE(STAGES_START + 200K, 16M) STACK(STAGES_START + 200K + 16M, 4K) } diff --git a/src/mainboard/emulation/spike-riscv/memlayout.ld b/src/mainboard/emulation/spike-riscv/memlayout.ld index b6e4d9d..376b9b1 100644 --- a/src/mainboard/emulation/spike-riscv/memlayout.ld +++ b/src/mainboard/emulation/spike-riscv/memlayout.ld @@ -24,7 +24,8 @@ DRAM_START(START) BOOTBLOCK(START, 64K) STACK(START + 8M, 4K) - FMAP_CACHE(START + 8M + 4K, 2K) + FMAP_CACHE(START + 12M, 2K) + CBFS_CACHE(START + 14M, 8K) /* hole at (START + 8M + 6K, 58K) */ ROMSTAGE(START + 8M + 64K, 128K) PRERAM_CBMEM_CONSOLE(START + 8M + 192k, 8K) diff --git a/src/mainboard/google/octopus/Kconfig b/src/mainboard/google/octopus/Kconfig index 3139716..8a33b5f 100644 --- a/src/mainboard/google/octopus/Kconfig +++ b/src/mainboard/google/octopus/Kconfig @@ -23,6 +23,7 @@ select MAINBOARD_HAS_TPM2 select GOOGLE_SMBIOS_MAINBOARD_VERSION select NO_FMAP_CACHE + select NO_CBFS_MCACHE if BOARD_GOOGLE_BASEBOARD_OCTOPUS diff --git a/src/soc/cavium/cn81xx/include/soc/memlayout.ld b/src/soc/cavium/cn81xx/include/soc/memlayout.ld index 1a0eb15..e78aa20 100644 --- a/src/soc/cavium/cn81xx/include/soc/memlayout.ld +++ b/src/soc/cavium/cn81xx/include/soc/memlayout.ld @@ -34,7 +34,8 @@ PRERAM_CBFS_CACHE(BOOTROM_OFFSET + 0x6000, 6K) FMAP_CACHE(BOOTROM_OFFSET + 0x7800, 2K) PRERAM_CBMEM_CONSOLE(BOOTROM_OFFSET + 0x8000, 8K) - BOOTBLOCK(BOOTROM_OFFSET + 0x20000, 64K) + BOOTBLOCK(BOOTROM_OFFSET + 0x20000, 56K) + CBFS_MCACHE(BOOTROM_OFFSET + 0x2e000, 8K) VBOOT2_WORK(BOOTROM_OFFSET + 0x30000, 12K) VBOOT2_TPM_LOG(BOOTROM_OFFSET + 0x33000, 2K) VERSTAGE(BOOTROM_OFFSET + 0x33800, 50K) diff --git a/src/soc/mediatek/mt8173/include/soc/memlayout.ld b/src/soc/mediatek/mt8173/include/soc/memlayout.ld index 2358c39..2d364b5 100644 --- a/src/soc/mediatek/mt8173/include/soc/memlayout.ld +++ b/src/soc/mediatek/mt8173/include/soc/memlayout.ld @@ -43,7 +43,8 @@ FMAP_CACHE(0x00103800, 2K) PRERAM_CBMEM_CONSOLE(0x00104000, 12K) WATCHDOG_TOMBSTONE(0x00107000, 4) - PRERAM_CBFS_CACHE(0x00107004, 16K - 4) + PRERAM_CBFS_CACHE(0x00107004, 8K - 4) + CBFS_MCACHE(0x00109000, 8K) TIMESTAMP(0x0010B000, 4K) ROMSTAGE(0x0010C000, 92K) STACK(0x00124000, 16K) diff --git a/src/soc/mediatek/mt8183/include/soc/memlayout.ld b/src/soc/mediatek/mt8183/include/soc/memlayout.ld index 996d2ec..0d20e31 100644 --- a/src/soc/mediatek/mt8183/include/soc/memlayout.ld +++ b/src/soc/mediatek/mt8183/include/soc/memlayout.ld @@ -43,7 +43,8 @@ SRAM_L2C_START(0x00200000) OVERLAP_DECOMPRESSOR_VERSTAGE_ROMSTAGE(0x00201000, 188K) - BOOTBLOCK(0x00230000, 64K) + BOOTBLOCK(0x00230000, 56K) + CBFS_MCACHE(0x0023e000, 8K) DRAM_INIT_CODE(0x00240000, 208K) PRERAM_CBFS_CACHE(0x00274000, 48K) SRAM_L2C_END(0x00280000) diff --git a/src/soc/nvidia/tegra124/include/soc/memlayout.ld b/src/soc/nvidia/tegra124/include/soc/memlayout.ld index 7e2cc7a..a342f6a 100644 --- a/src/soc/nvidia/tegra124/include/soc/memlayout.ld +++ b/src/soc/nvidia/tegra124/include/soc/memlayout.ld @@ -29,7 +29,8 @@ TTB(0x40000000, 16K + 32) PRERAM_CBMEM_CONSOLE(0x40004020, 6K - 32) FMAP_CACHE(0x40005800, 2K) - PRERAM_CBFS_CACHE(0x40006000, 14K) + CBFS_MCACHE(0x40006000, 8K) + PRERAM_CBFS_CACHE(0x40008000, 6K) VBOOT2_WORK(0x40009800, 12K) VBOOT2_TPM_LOG(0x4000D800, 2K) STACK(0x4000E000, 8K) diff --git a/src/soc/nvidia/tegra210/include/soc/memlayout.ld b/src/soc/nvidia/tegra210/include/soc/memlayout.ld index b7268d1..44f0153 100644 --- a/src/soc/nvidia/tegra210/include/soc/memlayout.ld +++ b/src/soc/nvidia/tegra210/include/soc/memlayout.ld @@ -30,7 +30,8 @@ SRAM_START(0x40000000) PRERAM_CBMEM_CONSOLE(0x40000000, 2K) FMAP_CACHE(0x40000800, 2K) - PRERAM_CBFS_CACHE(0x40001000, 28K) + PRERAM_CBFS_CACHE(0x40001000, 20K) + CBFS_MCACHE(0x40006000, 8K) VBOOT2_WORK(0x40008000, 12K) VBOOT2_TPM_LOG(0x4000B000, 2K) #if ENV_ARM64 diff --git a/src/soc/qualcomm/ipq40xx/include/soc/memlayout.ld b/src/soc/qualcomm/ipq40xx/include/soc/memlayout.ld index 6ff1018..76685cf 100644 --- a/src/soc/qualcomm/ipq40xx/include/soc/memlayout.ld +++ b/src/soc/qualcomm/ipq40xx/include/soc/memlayout.ld @@ -34,7 +34,8 @@ /* This includes bootblock image, can be reused after bootblock starts */ /* UBER_SBL(0x0A0C0000, 48K) */ - PRERAM_CBFS_CACHE(0x0A0C0000, 92K) + PRERAM_CBFS_CACHE(0x0A0C0000, 84K) + CBFS_MCACHE(0x0A0ED800, 8K) FMAP_CACHE(0x0A0EF800, 2K) TTB(0x0A0F0000, 16K) diff --git a/src/soc/qualcomm/ipq806x/include/soc/memlayout.ld b/src/soc/qualcomm/ipq806x/include/soc/memlayout.ld index 595d939..6e309c0 100644 --- a/src/soc/qualcomm/ipq806x/include/soc/memlayout.ld +++ b/src/soc/qualcomm/ipq806x/include/soc/memlayout.ld @@ -38,7 +38,8 @@ QCA_SHARED_RAM(2A03F000, 4K) */ STACK(0x2A040000, 16K) - PRERAM_CBFS_CACHE(0x2A044000, 91K) + PRERAM_CBFS_CACHE(0x2A044000, 83K) + CBFS_MCACHE(0x2A059000, 8K) FMAP_CACHE(0x2A05B000, 2K) TTB_SUBTABLES(0x2A05B800, 2K) TTB(0x2A05C000, 16K) diff --git a/src/soc/qualcomm/qcs405/include/soc/memlayout.ld b/src/soc/qualcomm/qcs405/include/soc/memlayout.ld index dd013b5..9d92949 100644 --- a/src/soc/qualcomm/qcs405/include/soc/memlayout.ld +++ b/src/soc/qualcomm/qcs405/include/soc/memlayout.ld @@ -38,7 +38,8 @@ STACK(0x8C4B000, 16K) TIMESTAMP(0x8C4F000, 1K) PRERAM_CBMEM_CONSOLE(0x8C4F400, 32K) - PRERAM_CBFS_CACHE(0x8C57400, 70K) + PRERAM_CBFS_CACHE(0x8C57400, 62K) + CBFS_MCACHE(0x8C66C00, 8K) FMAP_CACHE(0x8C68C00, 2K) REGION(bsram_unused, 0x8C69400, 0xA1C00, 0x100) BSRAM_END(0x8D80000) diff --git a/src/soc/qualcomm/sc7180/include/soc/memlayout.ld b/src/soc/qualcomm/sc7180/include/soc/memlayout.ld index 7323119..838fda3 100644 --- a/src/soc/qualcomm/sc7180/include/soc/memlayout.ld +++ b/src/soc/qualcomm/sc7180/include/soc/memlayout.ld @@ -52,6 +52,7 @@ REGION(qclib_serial_log, 0x14852000, 4K, 4K) REGION(ddr_information, 0x14853000, 1K, 1K) FMAP_CACHE(0x14853400, 2K) + CBFS_MCACHE(0x14853C00, 8K) REGION(dcb, 0x14870000, 16K, 4K) REGION(pmic, 0x14874000, 44K, 4K) REGION(limits_cfg, 0x1487F000, 4K, 4K) diff --git a/src/soc/qualcomm/sdm845/include/soc/memlayout.ld b/src/soc/qualcomm/sdm845/include/soc/memlayout.ld index c3a3b4c..5ea3e96 100644 --- a/src/soc/qualcomm/sdm845/include/soc/memlayout.ld +++ b/src/soc/qualcomm/sdm845/include/soc/memlayout.ld @@ -58,7 +58,8 @@ PRERAM_CBMEM_CONSOLE(0x14836400, 32K) PRERAM_CBFS_CACHE(0x1483E400, 70K) FMAP_CACHE(0x1484FC00, 2K) - REGION(bsram_unused, 0x14850400, 0x9DB00, 0x100) + CBFS_MCACHE(0x1485400, 8K) + REGION(bsram_unused, 0x14852400, 0x9BB00, 0x100) REGION(ddr_information, 0x148EDF00, 256, 256) REGION(limits_cfg, 0x148EE000, 4K, 4K) REGION(qclib_serial_log, 0x148EF000, 4K, 4K) diff --git a/src/soc/rockchip/rk3288/Kconfig b/src/soc/rockchip/rk3288/Kconfig index 6a44ccd..e36a8e8 100644 --- a/src/soc/rockchip/rk3288/Kconfig +++ b/src/soc/rockchip/rk3288/Kconfig @@ -30,6 +30,7 @@ select HAVE_LINEAR_FRAMEBUFFER select NO_BOOTBLOCK_CONSOLE select NO_FMAP_CACHE + select NO_CBFS_MCACHE if SOC_ROCKCHIP_RK3288 diff --git a/src/soc/rockchip/rk3399/include/soc/memlayout.ld b/src/soc/rockchip/rk3399/include/soc/memlayout.ld index 4e46e2d..2c7be29 100644 --- a/src/soc/rockchip/rk3399/include/soc/memlayout.ld +++ b/src/soc/rockchip/rk3399/include/soc/memlayout.ld @@ -37,11 +37,12 @@ FMAP_CACHE(0xFF8C1400, 2K) TIMESTAMP(0xFF8C1C00, 1K) /* 0xFF8C2004 is the entry point address the masked ROM will jump to. */ - OVERLAP_DECOMPRESSOR_VERSTAGE_ROMSTAGE(0xFF8C2004, 88K - 4) - BOOTBLOCK(0xFF8D8000, 40K) + OVERLAP_DECOMPRESSOR_VERSTAGE_ROMSTAGE(0xFF8C2004, 84K - 4) + BOOTBLOCK(0xFF8D7000, 40K) #endif - VBOOT2_WORK(0XFF8E2000, 12K) - TTB(0xFF8E5000, 24K) + CBFS_MCACHE(0xFF8E1000, 8K) + VBOOT2_WORK(0XFF8E3000, 12K) + TTB(0xFF8E6000, 20K) PRERAM_CBMEM_CONSOLE(0xFF8EB000, 8K) STACK(0xFF8ED000, 12K) SRAM_END(0xFF8F0000) diff --git a/src/soc/samsung/exynos5250/include/soc/memlayout.ld b/src/soc/samsung/exynos5250/include/soc/memlayout.ld index 7e052f0..e97fcb0 100644 --- a/src/soc/samsung/exynos5250/include/soc/memlayout.ld +++ b/src/soc/samsung/exynos5250/include/soc/memlayout.ld @@ -31,7 +31,8 @@ ROMSTAGE(0x2030000, 128K) /* 32K hole */ TTB(0x2058000, 16K) - PRERAM_CBFS_CACHE(0x205C000, 76K) + PRERAM_CBFS_CACHE(0x205C000, 68K) + CBFS_MCACHE(0x206D000, 8K) FMAP_CACHE(0x206F000, 2K) VBOOT2_TPM_LOG(0x206F800, 2K) VBOOT2_WORK(0x2070000, 12K) diff --git a/src/soc/samsung/exynos5420/include/soc/memlayout.ld b/src/soc/samsung/exynos5420/include/soc/memlayout.ld index ff781d2..e2e51c0 100644 --- a/src/soc/samsung/exynos5420/include/soc/memlayout.ld +++ b/src/soc/samsung/exynos5420/include/soc/memlayout.ld @@ -32,7 +32,8 @@ ROMSTAGE(0x2030000, 128K) /* 32K hole */ TTB(0x2058000, 16K) - PRERAM_CBFS_CACHE(0x205C000, 74K) + PRERAM_CBFS_CACHE(0x205C000, 66K) + CBFS_MCACHE(0x206C800, 8K) FMAP_CACHE(0x206E800, 2K) STACK(0x206F000, 16K) /* 1K hole for weird kernel-shared CPU/SMP state structure that doesn't diff --git a/src/soc/sifive/fu540/include/soc/memlayout.ld b/src/soc/sifive/fu540/include/soc/memlayout.ld index 46c559c..cc4f900 100644 --- a/src/soc/sifive/fu540/include/soc/memlayout.ld +++ b/src/soc/sifive/fu540/include/soc/memlayout.ld @@ -26,7 +26,8 @@ L2LIM_START(FU540_L2LIM) BOOTBLOCK(FU540_L2LIM, 64K) CAR_STACK(FU540_L2LIM + 64K, 20K) - PRERAM_CBMEM_CONSOLE(FU540_L2LIM + 84K, 8K) + PRERAM_CBMEM_CONSOLE(FU540_L2LIM + 76K, 8K) + CBFS_MCACHE(FU540_L2LIM + 84K, 8K) FMAP_CACHE(FU540_L2LIM + 92K, 2K) ROMSTAGE(FU540_L2LIM + 128K, 128K) PRERAM_CBFS_CACHE(FU540_L2LIM + 256K, 128K) -- To view, visit https://review.coreboot.org/c/coreboot/+/38424 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0abd1c813aece6e78fb883f292ce6c9319545c44 Gerrit-Change-Number: 38424 Gerrit-PatchSet: 1 Gerrit-Owner: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Aaron Durbin <adurbin(a)chromium.org> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Philipp Hug <philipp(a)hug.cx> Gerrit-Reviewer: ron minnich <rminnich(a)gmail.com> Gerrit-MessageType: newchange

10 44

Change in coreboot[master]: [WIP]drivers: Replace multiple fill_fb_framebuffer with single instance
by Patrick Rudolph (Code Review) 14 Dec '20

14 Dec '20

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39003 ) Change subject: [WIP]drivers: Replace multiple fill_fb_framebuffer with single instance ...................................................................... [WIP]drivers: Replace multiple fill_fb_framebuffer with single instance Replace all duplications of fill_fb_framebuffer and provide a single one. Should not change the current behaviour. TODO: Libgfxinit seems to expose one,too Change-Id: Ife507f7e7beaf59854e533551b4b87ea6980c1f4 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/device/oprom/realmode/x86.c M src/device/oprom/yabel/vbe.c M src/drivers/intel/fsp1_1/fsp_gop.c M src/drivers/intel/fsp2_0/graphics.c M src/drivers/intel/fsp2_0/include/fsp/util.h M src/drivers/xgi/common/xgi_coreboot.c M src/lib/Kconfig M src/lib/Makefile.inc 8 files changed, 111 insertions(+), 185 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/03/39003/1 diff --git a/src/device/oprom/realmode/x86.c b/src/device/oprom/realmode/x86.c index 8ba0241..4c11e6f 100644 --- a/src/device/oprom/realmode/x86.c +++ b/src/device/oprom/realmode/x86.c @@ -23,6 +23,7 @@ #include <pc80/i8254.h> #include <string.h> #include <vbe.h> +#include <framebuffer_info.h> /* we use x86emu's register file representation */ #include <x86emu/regs.h> @@ -218,6 +219,7 @@ #if CONFIG(FRAMEBUFFER_SET_VESA_MODE) static vbe_mode_info_t mode_info; static int mode_info_valid; +static struct edid_fb_info *fb_info; static int vbe_mode_info_valid(void) { @@ -362,6 +364,28 @@ } vbe_set_mode(&mode_info); + + if (!vbe_mode_info_valid()) + return; + + if (!fb_info) { + fb_info = fb_new_framebuffer_info(); + } + if (fb_info) { + fb_fill_framebuffer_info_ex(fb_info, mode_info.vesa.phys_base_ptr, + le16_to_cpu(mode_info.vesa.x_resolution), + le16_to_cpu(mode_info.vesa.y_resolution), + le16_to_cpu(mode_info.vesa.bytes_per_scanline), + mode_info.vesa.bits_per_pixel, + mode_info.vesa.reserved_mask_pos, + mode_info.vesa.reserved_mask_size, + mode_info.vesa.red_mask_pos, + mode_info.vesa.red_mask_size, + mode_info.vesa.green_mask_pos, + mode_info.vesa.green_mask_size, + mode_info.vesa.blue_mask_pos, + mode_info.vesa.blue_mask_size); + } } void vbe_textmode_console(void) @@ -373,34 +397,6 @@ die("\nError: In %s function\n", __func__); } -int fill_lb_framebuffer(struct lb_framebuffer *framebuffer) -{ - if (!vbe_mode_info_valid()) - return -1; - - framebuffer->physical_address = mode_info.vesa.phys_base_ptr; - - framebuffer->x_resolution = le16_to_cpu(mode_info.vesa.x_resolution); - framebuffer->y_resolution = le16_to_cpu(mode_info.vesa.y_resolution); - framebuffer->bytes_per_line = - le16_to_cpu(mode_info.vesa.bytes_per_scanline); - framebuffer->bits_per_pixel = mode_info.vesa.bits_per_pixel; - - framebuffer->red_mask_pos = mode_info.vesa.red_mask_pos; - framebuffer->red_mask_size = mode_info.vesa.red_mask_size; - - framebuffer->green_mask_pos = mode_info.vesa.green_mask_pos; - framebuffer->green_mask_size = mode_info.vesa.green_mask_size; - - framebuffer->blue_mask_pos = mode_info.vesa.blue_mask_pos; - framebuffer->blue_mask_size = mode_info.vesa.blue_mask_size; - - framebuffer->reserved_mask_pos = mode_info.vesa.reserved_mask_pos; - framebuffer->reserved_mask_size = mode_info.vesa.reserved_mask_size; - - return 0; -} - #endif void run_bios(struct device *dev, unsigned long addr) diff --git a/src/device/oprom/yabel/vbe.c b/src/device/oprom/yabel/vbe.c index a3d736f..2c05338 100644 --- a/src/device/oprom/yabel/vbe.c +++ b/src/device/oprom/yabel/vbe.c @@ -162,6 +162,7 @@ } static int mode_info_valid; +static struct edid_fb_info *fb_info; static int vbe_mode_info_valid(void) { @@ -747,33 +748,28 @@ mode_info.video_mode = (1 << 14) | CONFIG_FRAMEBUFFER_VESA_MODE; vbe_get_mode_info(&mode_info); vbe_set_mode(&mode_info); -} -int fill_lb_framebuffer(struct lb_framebuffer *framebuffer) -{ if (!vbe_mode_info_valid()) - return -1; + return; - framebuffer->physical_address = le32_to_cpu(mode_info.vesa.phys_base_ptr); - - framebuffer->x_resolution = le16_to_cpu(mode_info.vesa.x_resolution); - framebuffer->y_resolution = le16_to_cpu(mode_info.vesa.y_resolution); - framebuffer->bytes_per_line = le16_to_cpu(mode_info.vesa.bytes_per_scanline); - framebuffer->bits_per_pixel = mode_info.vesa.bits_per_pixel; - - framebuffer->red_mask_pos = mode_info.vesa.red_mask_pos; - framebuffer->red_mask_size = mode_info.vesa.red_mask_size; - - framebuffer->green_mask_pos = mode_info.vesa.green_mask_pos; - framebuffer->green_mask_size = mode_info.vesa.green_mask_size; - - framebuffer->blue_mask_pos = mode_info.vesa.blue_mask_pos; - framebuffer->blue_mask_size = mode_info.vesa.blue_mask_size; - - framebuffer->reserved_mask_pos = mode_info.vesa.reserved_mask_pos; - framebuffer->reserved_mask_size = mode_info.vesa.reserved_mask_size; - - return 0; + if (!fb_info) { + fb_info = fb_new_framebuffer_info(); + } + if (fb_info) { + fb_fill_framebuffer_info_ex(fb_info, mode_info.vesa.phys_base_ptr, + le16_to_cpu(mode_info.vesa.x_resolution), + le16_to_cpu(mode_info.vesa.y_resolution), + le16_to_cpu(mode_info.vesa.bytes_per_scanline), + mode_info.vesa.bits_per_pixel, + mode_info.vesa.reserved_mask_pos, + mode_info.vesa.reserved_mask_size, + mode_info.vesa.red_mask_pos, + mode_info.vesa.red_mask_size, + mode_info.vesa.green_mask_pos, + mode_info.vesa.green_mask_size, + mode_info.vesa.blue_mask_pos, + mode_info.vesa.blue_mask_size); + } } void vbe_textmode_console(void) diff --git a/src/drivers/intel/fsp1_1/fsp_gop.c b/src/drivers/intel/fsp1_1/fsp_gop.c index eb64151..9b555e6 100644 --- a/src/drivers/intel/fsp1_1/fsp_gop.c +++ b/src/drivers/intel/fsp1_1/fsp_gop.c @@ -12,10 +12,12 @@ */ #include <boot/coreboot_tables.h> +#include <bootstate.h> #include <console/console.h> +#include <framebuffer_info.h> #include <fsp/util.h> -int fill_lb_framebuffer(struct lb_framebuffer *framebuffer) +static void fill_framebuffer_info(void *unused) { VOID *hob_list_ptr; hob_list_ptr = get_hob_list(); @@ -30,20 +32,15 @@ printk(BIOS_DEBUG, "FSP_DEBUG: Graphics Data HOB present\n"); vbt_gop = GET_GUID_HOB_DATA(vbt_hob); - framebuffer->physical_address = vbt_gop->FrameBufferBase; - framebuffer->x_resolution = vbt_gop->GraphicsMode.HorizontalResolution; - framebuffer->y_resolution = vbt_gop->GraphicsMode.VerticalResolution; - framebuffer->bytes_per_line = vbt_gop->GraphicsMode.PixelsPerScanLine - * 4; - framebuffer->bits_per_pixel = 32; - framebuffer->red_mask_pos = 16; - framebuffer->red_mask_size = 8; - framebuffer->green_mask_pos = 8; - framebuffer->green_mask_size = 8; - framebuffer->blue_mask_pos = 0; - framebuffer->blue_mask_size = 8; - framebuffer->reserved_mask_pos = 24; - framebuffer->reserved_mask_size = 8; + struct edid_fb_info *info = fb_new_framebuffer_info(); + if (!info) + return; - return 0; + fb_fill_framebuffer_info(info, vbt_gop->FrameBufferBase, + vbt_gop->GraphicsMode.HorizontalResolution, + vbt_gop->GraphicsMode.VerticalResolution, + vbt_gop->GraphicsMode.PixelsPerScanLine * 4, + 32); } + +BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_EXIT, fill_framebuffer_info, NULL); diff --git a/src/drivers/intel/fsp2_0/graphics.c b/src/drivers/intel/fsp2_0/graphics.c index be7afdb..f35556f 100644 --- a/src/drivers/intel/fsp2_0/graphics.c +++ b/src/drivers/intel/fsp2_0/graphics.c @@ -17,6 +17,7 @@ #include <fsp/util.h> #include <soc/intel/common/vbt.h> #include <types.h> +#include <framebuffer_info.h> enum pixel_format { pixel_rgbx_8bpc = 0, @@ -58,48 +59,18 @@ [pixel_bgrx_8bpc] = { {16, 8}, {8, 8}, {0, 8}, {24, 8} }, }; -enum cb_err fsp_fill_lb_framebuffer(struct lb_framebuffer *framebuffer) +__weak uintptr_t fsp_soc_get_igd_bar(void) { - size_t size; - const struct hob_graphics_info *ginfo; - const struct fsp_framebuffer *fbinfo; - - ginfo = fsp_find_extension_hob_by_guid(fsp_graphics_info_guid, &size); - - if (!ginfo) { - printk(BIOS_ALERT, "Graphics hand-off block not found\n"); - return CB_ERR; - } - - if (ginfo->pixel_format >= ARRAY_SIZE(fsp_framebuffer_format_map)) { - printk(BIOS_ALERT, "FSP set unknown framebuffer format: %d\n", - ginfo->pixel_format); - return CB_ERR; - } - - fbinfo = fsp_framebuffer_format_map + ginfo->pixel_format; - - framebuffer->physical_address = ginfo->framebuffer_base; - framebuffer->x_resolution = ginfo->horizontal_resolution; - framebuffer->y_resolution = ginfo->vertical_resolution; - framebuffer->bytes_per_line = ginfo->pixels_per_scanline * 4; - framebuffer->bits_per_pixel = 32; - framebuffer->red_mask_pos = fbinfo->red.pos; - framebuffer->red_mask_size = fbinfo->red.size; - framebuffer->green_mask_pos = fbinfo->green.pos; - framebuffer->green_mask_size = fbinfo->green.size; - framebuffer->blue_mask_pos = fbinfo->blue.pos; - framebuffer->blue_mask_size = fbinfo->blue.size; - framebuffer->reserved_mask_pos = fbinfo->rsvd.pos; - framebuffer->reserved_mask_size = fbinfo->rsvd.pos; - - return CB_SUCCESS; + return 0; } -int fill_lb_framebuffer(struct lb_framebuffer *framebuffer) +static void fill_framebuffer_info(void *unused) { + size_t size; enum cb_err ret; uintptr_t framebuffer_bar; + const struct hob_graphics_info *ginfo; + const struct fsp_framebuffer *fbinfo; /* Pci enumeration happens after silicon init. * After enumeration graphic framebuffer base may be relocated. @@ -109,24 +80,44 @@ if (!framebuffer_bar) { printk(BIOS_ALERT, "Framebuffer BAR invalid\n"); - return -1; - } - - ret = fsp_fill_lb_framebuffer(framebuffer); - if (ret != CB_SUCCESS) { - printk(BIOS_ALERT, "FSP did not return a valid framebuffer\n"); - return -1; + return; } /* Resource allocator can move the BAR around after FSP configures it */ - framebuffer->physical_address = framebuffer_bar; - printk(BIOS_DEBUG, "Graphics framebuffer located at 0x%llx\n", - framebuffer->physical_address); + printk(BIOS_DEBUG, "Graphics framebuffer located at 0x%llx\n", framebuffer_bar); - return 0; + ginfo = fsp_find_extension_hob_by_guid(fsp_graphics_info_guid, &size); + + if (!ginfo) { + printk(BIOS_ALERT, "Graphics hand-off block not found\n"); + return; + } + + if (ginfo->pixel_format >= ARRAY_SIZE(fsp_framebuffer_format_map)) { + printk(BIOS_ALERT, "FSP set unknown framebuffer format: %d\n", + ginfo->pixel_format); + return; + } + + fbinfo = fsp_framebuffer_format_map + ginfo->pixel_format; + + struct edid_fb_info *info = fb_new_framebuffer_info(); + if (!info) + return; + + fb_fill_framebuffer_info_ex(fb_info, ginfo->framebuffer_base, + ginfo->horizontal_resolution, + ginfo->vertical_resolution, + ginfo->pixels_per_scanline * 4, + 32, + fbinfo->rsvd.pos, + fbinfo->rsvd.size, + fbinfo->red.pos, + fbinfo->red.size, + fbinfo->green.pos, + fbinfo->green.size, + fbinfo->blue.pos, + fbinfo->blue.size); } -__weak uintptr_t fsp_soc_get_igd_bar(void) -{ - return 0; -} +BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_EXIT, fill_framebuffer_info, NULL); diff --git a/src/drivers/intel/fsp2_0/include/fsp/util.h b/src/drivers/intel/fsp2_0/include/fsp/util.h index 303bafe..15e7390 100644 --- a/src/drivers/intel/fsp2_0/include/fsp/util.h +++ b/src/drivers/intel/fsp2_0/include/fsp/util.h @@ -76,7 +76,6 @@ void *fsp_get_hob_list_ptr(void); const void *fsp_find_extension_hob_by_guid(const uint8_t *guid, size_t *size); const void *fsp_find_nv_storage_data(size_t *size); -enum cb_err fsp_fill_lb_framebuffer(struct lb_framebuffer *framebuffer); int fsp_find_range_hob(struct range_entry *re, const uint8_t guid[16]); void fsp_display_fvi_version_hob(void); void fsp_find_reserved_memory(struct range_entry *re); diff --git a/src/drivers/xgi/common/xgi_coreboot.c b/src/drivers/xgi/common/xgi_coreboot.c index d65e007..235cbe2 100644 --- a/src/drivers/xgi/common/xgi_coreboot.c +++ b/src/drivers/xgi/common/xgi_coreboot.c @@ -21,6 +21,7 @@ #include <device/pci_ids.h> #include <device/pci_ops.h> #include <pc80/vga.h> +#include <framebuffer_info.h> #include "xgi_coreboot.h" #include "vstruct.h" @@ -31,8 +32,7 @@ #include "vb_setmode.h" #include "XGI_main.c" -static int xgi_vbe_valid; -static struct lb_framebuffer xgi_fb; +static struct edid_fb_info *fb_info; int xgifb_probe(struct pci_dev *pdev, struct xgifb_video_info *xgifb_info) { @@ -359,43 +359,16 @@ XGIbios_mode[xgifb_info->mode_idx].bpp, xgifb_info->refresh_rate); - /* Set LinuxBIOS framebuffer information */ - xgi_vbe_valid = 1; - xgi_fb.physical_address = xgifb_info->video_base; - xgi_fb.x_resolution = xgifb_info->video_width; - xgi_fb.y_resolution = xgifb_info->video_height; - xgi_fb.bytes_per_line = - xgifb_info->video_width * xgifb_info->video_bpp; - xgi_fb.bits_per_pixel = xgifb_info->video_bpp; - - xgi_fb.reserved_mask_pos = 0; - xgi_fb.reserved_mask_size = 0; - switch (xgifb_info->video_bpp) { - case 32: - case 24: - /* packed into 4-byte words */ - xgi_fb.reserved_mask_pos = 24; - xgi_fb.reserved_mask_size = 8; - xgi_fb.red_mask_pos = 16; - xgi_fb.red_mask_size = 8; - xgi_fb.green_mask_pos = 8; - xgi_fb.green_mask_size = 8; - xgi_fb.blue_mask_pos = 0; - xgi_fb.blue_mask_size = 8; - break; - case 16: - /* packed into 2-byte words */ - xgi_fb.red_mask_pos = 11; - xgi_fb.red_mask_size = 5; - xgi_fb.green_mask_pos = 5; - xgi_fb.green_mask_size = 6; - xgi_fb.blue_mask_pos = 0; - xgi_fb.blue_mask_size = 5; - break; - default: - printk(BIOS_SPEW, "%s: unsupported BPP %d\n", __func__, - xgifb_info->video_bpp); - xgi_vbe_valid = 0; + /* Set framebuffer information */ + if (!fb_info) { + fb_info = fb_new_framebuffer_info(); + } + if (fb_info) { + fb_fill_framebuffer_info(fb_info, xgifb_info->video_base, + xgifb_info->video_width, + xgifb_info->video_height, + xgifb_info->video_width * xgifb_info->video_bpp, + xgifb_info->video_bpp); } } else { /* @@ -415,22 +388,6 @@ return 0; } - -static int vbe_mode_info_valid(void) -{ - return xgi_vbe_valid; -} - -int fill_lb_framebuffer(struct lb_framebuffer *framebuffer) -{ - if (!vbe_mode_info_valid()) - return -1; - - *framebuffer = xgi_fb; - - return 0; -} - struct xgifb_video_info *xgifb_video_info_ptr; struct xgifb_video_info *pci_get_drvdata(struct pci_dev *pdev) { diff --git a/src/lib/Kconfig b/src/lib/Kconfig index dd9974a..d831975 100644 --- a/src/lib/Kconfig +++ b/src/lib/Kconfig @@ -5,14 +5,6 @@ implementation. This activates a stub that logs the missing board reset and halts execution. -config NO_EDID_FILL_FB - bool - default y if !MAINBOARD_DO_NATIVE_VGA_INIT - help - Don't include default fill_lb_framebuffer() implementation. Select - this if your drivers uses MAINBOARD_DO_NATIVE_VGA_INIT but provides - its own fill_lb_framebuffer() implementation. - config RAMSTAGE_ADA bool help diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc index 2333f64..a1fb8c2 100644 --- a/src/lib/Makefile.inc +++ b/src/lib/Makefile.inc @@ -134,9 +134,7 @@ ramstage-$(CONFIG_COLLECT_TIMESTAMPS) += timestamp.c ramstage-$(CONFIG_COVERAGE) += libgcov.c ramstage-y += edid.c -ifneq ($(CONFIG_NO_EDID_FILL_FB),y) ramstage-y += edid_fill_fb.c -endif ramstage-y += memrange.c ramstage-$(CONFIG_COOP_MULTITASKING) += thread.c ramstage-$(CONFIG_TIMER_QUEUE) += timer_queue.c -- To view, visit https://review.coreboot.org/c/coreboot/+/39003 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ife507f7e7beaf59854e533551b4b87ea6980c1f4 Gerrit-Change-Number: 39003 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: Huang Jin <huang.jin(a)intel.com> Gerrit-Reviewer: Lee Leahy <leroy.p.leahy(a)intel.com> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

10 68

Change in ...coreboot[master]: Adding Asus A88XM-E FM2+ motherboard with documentation
by Balázs Vinarz (Code Review) 06 Dec '20

06 Dec '20

Balázs Vinarz has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30987 Change subject: Adding Asus A88XM-E FM2+ motherboard with documentation ...................................................................... Adding Asus A88XM-E FM2+ motherboard with documentation Signed-off-by: Balazs Vinarz <vinibali1(a)gmail.com> Change-Id: I60fa0636ba41f5f1a6a3faa2764bf2f0a968cf90 --- A Documentation/mainboard/asus/a88xm-e.md A src/mainboard/asus/a88xm-e/BiosCallOuts.c A src/mainboard/asus/a88xm-e/Kconfig A src/mainboard/asus/a88xm-e/Kconfig.name A src/mainboard/asus/a88xm-e/Makefile.inc A src/mainboard/asus/a88xm-e/OemCustomize.c A src/mainboard/asus/a88xm-e/OptionsIds.h A src/mainboard/asus/a88xm-e/acpi/cpstate.asl A src/mainboard/asus/a88xm-e/acpi/gpe.asl A src/mainboard/asus/a88xm-e/acpi/mainboard.asl A src/mainboard/asus/a88xm-e/acpi/routing.asl A src/mainboard/asus/a88xm-e/acpi/sata.asl A src/mainboard/asus/a88xm-e/acpi/si.asl A src/mainboard/asus/a88xm-e/acpi/sleep.asl A src/mainboard/asus/a88xm-e/acpi/superio.asl A src/mainboard/asus/a88xm-e/acpi/thermal.asl A src/mainboard/asus/a88xm-e/acpi/usb_oc.asl A src/mainboard/asus/a88xm-e/acpi_tables.c A src/mainboard/asus/a88xm-e/board_info.txt A src/mainboard/asus/a88xm-e/buildOpts.c A src/mainboard/asus/a88xm-e/cmos.layout A src/mainboard/asus/a88xm-e/devicetree_a88xm-e.cb A src/mainboard/asus/a88xm-e/dsdt.asl A src/mainboard/asus/a88xm-e/irq_tables.c A src/mainboard/asus/a88xm-e/mainboard.c A src/mainboard/asus/a88xm-e/mptable.c A src/mainboard/asus/a88xm-e/romstage.c 27 files changed, 2,371 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/87/30987/1 diff --git a/Documentation/mainboard/asus/a88xm-e.md b/Documentation/mainboard/asus/a88xm-e.md new file mode 100644 index 0000000..5f50c5a --- /dev/null +++ b/Documentation/mainboard/asus/a88xm-e.md @@ -0,0 +1,131 @@ +# ASUS A88XM-E + +This page describes how to run coreboot on the [ASUS A88XM-E]. + +## Technology + +Both "Trinity" and "Richland" FM2 desktop processing units are working, +the CPU architecture in these CPUs/APUs are [Piledriver], +and their GPU is [TeraScale 3] (VLIW4-based). + +Kaveri is non-working at the moment (FM2+), +the CPU architecture in these CPUs/APUs are [Steamroller], +and their GPU is [Sea Islands] (GCN2-based). + +```eval_rst ++------------------+--------------------------------------------------+ +| A88XM-E | | ++------------------+--------------------------------------------------+ +| DDR voltage IC | Nuvoton 3101S | ++------------------+--------------------------------------------------+ +| Network | Realtek RTL8111G - Not working | ++------------------+--------------------------------------------------+ +| Northbridge | Integrated into CPU with IMC and GPU (APUs only) | ++------------------+--------------------------------------------------+ +| Southbridge | Bolton-D4 | ++------------------+--------------------------------------------------+ +| Sound IC | Realtek ALC887 | ++------------------+--------------------------------------------------+ +| Super I/O | ITE 8603E | ++------------------+--------------------------------------------------+ +| VRM controller | DIGI VRM ASP1206 | ++------------------+--------------------------------------------------+ +``` + +## Flashing coreboot + +```eval_rst ++---------------------+------------+ +| Type | Value | ++=====================+============+ +| Socketed flash | yes | ++---------------------+------------+ +| Model | [GD25Q64] | ++---------------------+------------+ +| Size | 8 MiB | ++---------------------+------------+ +| Package | DIP-8 | ++---------------------+------------+ +| Write protection | yes | ++---------------------+------------+ +| Dual BIOS feature | no | ++---------------------+------------+ +| Internal flashing | yes | ++---------------------+------------+ +``` + +### Internal programming + +The main SPI flash can be accessed using [flashrom], if the +AmdSpiRomProtect modules have been deleted in the factory image previously. + +## Integrated graphics + +### Retrieve the VGA optionrom from the vendor EFI binary by running: + + # dd if=/dev/mem of=vgabios.bin bs=1k count=64 skip=768 + +This version is usable for all the GPUs. +1002,9901 Trinity (Radeon HD 7660D) +1002,9904 Trinity (Radeon HD 7560D) +1002,990c Richland (Radeon HD 8670D) +1002,990e Richland (Radeon HD 8570D) +1002,9991 Trinity (Radeon HD 7540D) +1002,9993 Trinity (Radeon HD 7480D) +1002,9996 Richland (Radeon HD 8470D) +1002,9998 Richland (Radeon HD 8370D) +1002,999d Richland (Radeon HD 8550D) +1002,130f Kaveri (Radeon R7) + +## Known issues + +- AHCI hot-plug +- Integrated ethernet +- S3 resume +- XHCI + +### XHCI ports can broke after using any of the blobs, restarting the +board with factory image makes it work again as fallback. +Tested even with/without the Bolton and Hudson blobs. + +## Untested + +- audio over HDMI +- IOMMU +- PS/2 mouse + +## TODOs + +- one ATOMBIOS module for all the integrated GPUs +- manage to work with Kaveri/Godavary (missing PSP firmware?) + +## Working + +- ACPI +- CPU frequency scaling +- flashrom under coreboot +- Hardware monitoring +- Integrated graphics +- Keyboard +- KVM virtualization +- Onboard audio +- PCI +- PCIe +- PS/2 keyboard (during payload, bootloader) +- SATA +- Serial port +- SuperIO based fan control +- USB (disabling XHCI controller makes to work as fallback USB2.0 ports) + +## Extra resources + +- [Board manual] + +[ASUS A88XM-E]: https://www.asus.com/Motherboards/A88XME/ +[Board manual]: https://dlcdnets.asus.com/pub/ASUS/mb/SocketFM2/A88XM-E/E9125_A88XM-E.pdf +[flashrom]: https://flashrom.org/Flashrom +[GD25Q64]: http://www.elm-tech.com/ja/products/spi-flash-memory/gd25q64/gd25q64.pdf +[Piledriver]: https://en.wikipedia.org/wiki/Piledriver_%28microarchitecture%29#APU_lines +[Sea Islands]: https://en.wikipedia.org/wiki/Graphics_Core_Next#GCN_2nd_generation +[Steamroller]: https://en.wikipedia.org/wiki/Steamroller_(microarchitecture) +[TeraScale 3]: https://en.wikipedia.org/wiki/TeraScale_%28microarchitecture%29#TeraScale_3 diff --git a/src/mainboard/asus/a88xm-e/BiosCallOuts.c b/src/mainboard/asus/a88xm-e/BiosCallOuts.c new file mode 100644 index 0000000..56c1753 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/BiosCallOuts.c @@ -0,0 +1,98 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <AGESA.h> +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include <northbridge/amd/agesa/state_machine.h> + +#include <vendorcode/amd/agesa/f15tn/Proc/Fch/FchPlatform.h> +#include <stdlib.h> + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, + {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/** + * ASUS A88XM-E board ALC887-VD Verb Table + * + * Copied from `/sys/class/sound/hwC1D0/init_pin_configs` when running + * the vendor BIOS. + */ +#if !IS_ENABLED(CONFIG_BOARD_ASUS_A88XM_E) +const CODEC_ENTRY a88xm_e_alc887_VerbTbl[] = { + {0x11, 0x90460130}, + {0x12, 0x40330000}, + {0x14, 0x01014010}, + {0x15, 0x411111f0}, + {0x16, 0x411111f0}, + {0x17, 0x411111f0}, + {0x18, 0x01a19040}, + {0x19, 0x02a19050}, + {0x1a, 0x0181304f}, + {0x1b, 0x02214020}, + {0x1c, 0x411111f0}, + {0x1d, 0x4044c601}, + {0x1e, 0x411111f0}, + {0x1f, 0x411111f0} + }; +#else +const CODEC_ENTRY a88xm_e_alc887_VerbTbl[] = { + {0x11, 0x90460130}, + {0x12, 0x40330000}, + {0x14, 0x01014010}, + {0x15, 0x411111f0}, + {0x16, 0x411111f0}, + {0x17, 0x411111f0}, + {0x18, 0x01a19040}, + {0x19, 0x02a19050}, + {0x1a, 0x0181304f}, + {0x1b, 0x02214020}, + {0x1c, 0x411111f0}, + {0x1d, 0x4044c601}, + {0x1e, 0x411111f0}, + {0x1f, 0x411111f0} +}; +#endif + +static const CODEC_TBL_LIST CodecTableList[] = +{ + {0x10ec0887, (CODEC_ENTRY*)&a88xm_e_alc887_VerbTbl[0]}, + {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} +}; + +void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset) +{ + FchParams_reset->LegacyFree = IS_ENABLED(CONFIG_HUDSON_LEGACY_FREE); +} + +void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env) +{ + /* Azalia Controller OEM Codec Table Pointer */ + FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); + + /* Fan Control */ + FchParams_env->Imc.ImcEnable = FALSE; + FchParams_env->Hwm.HwMonitorEnable = FALSE; + FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */ +} diff --git a/src/mainboard/asus/a88xm-e/Kconfig b/src/mainboard/asus/a88xm-e/Kconfig new file mode 100644 index 0000000..70be2f1 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/Kconfig @@ -0,0 +1,117 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# Copyright (C) 2012 Rudolf Marek <r.marek(a)assembler.cz> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +if BOARD_ASUS_A88XM_E + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select CPU_AMD_AGESA_FAMILY15_TN + select NORTHBRIDGE_AMD_AGESA_FAMILY15_TN + select SOUTHBRIDGE_AMD_AGESA_HUDSON + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select SUPERIO_ITE_IT8728F + select BOARD_ROMSIZE_KB_8192 + select GFXUMA + +choice + prompt "DDR3 memory voltage" + default BOARD_ASUS_A88XM_E_DDR3_VOLT_150 + +config BOARD_ASUS_A88XM_E_DDR3_VOLT_135 + bool "1.35V" + help + Set DRR3 memory voltage to 1.35V +config BOARD_ASUS_A88XM_E_DDR3_VOLT_150 + bool "1.50V" + help + Set DRR3 memory voltage to 1.50V +config BOARD_ASUS_A88XM_E_DDR3_VOLT_165 + bool "1.65V" + help + Set DRR3 memory voltage to 1.65V +endchoice + +config BOARD_ASUS_A88XM_E_DDR3_VOLT_VAL + hex + default 0x9e if BOARD_ASUS_A88XM_E_DDR3_VOLT_135 + default 0x0 if BOARD_ASUS_A88XM_E_DDR3_VOLT_150 + default 0x1e if BOARD_ASUS_A88XM_E_DDR3_VOLT_165 + +config MAINBOARD_DIR + string + default asus/a88xm-e + +config MAINBOARD_PART_NUMBER + string + default "A88XM-E" if BOARD_ASUS_A88XM_E + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config HUDSON_XHCI_FWM + bool + default n + +config HUDSON_IMC_FWM + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS_ID + string + default "1002,990e" + +config CONFIG_DRIVERS_PS2_KEYBOARD + bool + default y + +config CONFIG_HUDSON_XHCI_ENABLE + bool + default n + +config HUDSON_LEGACY_FREE + bool + default n + +config POST_IO + bool + default n + +config CONFIG_POST_DEVICE_PCI_PCIE + bool + default y + +config DEVICETREE + string + default "devicetree_a88xm-e.cb" + +endif # BOARD_ASUS_A88XM_E diff --git a/src/mainboard/asus/a88xm-e/Kconfig.name b/src/mainboard/asus/a88xm-e/Kconfig.name new file mode 100644 index 0000000..492d610 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_ASUS_A88XM_E + bool "A88XM-E" diff --git a/src/mainboard/asus/a88xm-e/Makefile.inc b/src/mainboard/asus/a88xm-e/Makefile.inc new file mode 100644 index 0000000..f8895fa --- /dev/null +++ b/src/mainboard/asus/a88xm-e/Makefile.inc @@ -0,0 +1,22 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +romstage-y += buildOpts.c +romstage-y += BiosCallOuts.c +romstage-y += OemCustomize.c + +ramstage-y += buildOpts.c +ramstage-y += BiosCallOuts.c +ramstage-y += OemCustomize.c diff --git a/src/mainboard/asus/a88xm-e/OemCustomize.c b/src/mainboard/asus/a88xm-e/OemCustomize.c new file mode 100644 index 0000000..4c4c5bf --- /dev/null +++ b/src/mainboard/asus/a88xm-e/OemCustomize.c @@ -0,0 +1,177 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <Porting.h> +#include <AGESA.h> + +#include <northbridge/amd/agesa/state_machine.h> +#include <PlatformMemoryConfiguration.h> + +/* + * Lane ID Mapping (from Fam15h BKDG: Table 45: Lane Id Mapping) + * + * Lane Id + * 0 P_UMI_[T,R]X[P,N]0 - southbridge link, connect via dev 8 + * 1 P_UMI_[T,R]X[P,N]1 - southbridge link, connect via dev 8 + * 2 P_UMI_[T,R]X[P,N]2 - southbridge link, connect via dev 8 + * 3 P_UMI_[T,R]X[P,N]3 - southbridge link, connect via dev 8 + * 4 P_GPP_[T,R]X[P,N]0 - may connect to PCI dev 4 - 7 + * 5 P_GPP_[T,R]X[P,N]1 - may connect to PCI dev 4 - 7 + * 6 P_GPP_[T,R]X[P,N]2 - may connect to PCI dev 4 - 7 + * 7 P_GPP_[T,R]X[P,N]3 - may connect to PCI dev 4 - 7 + * 8 P_GFX_[T,R]X[P,N]0 - may be used to form GFX slot or DDI + * 9 P_GFX_[T,R]X[P,N]1 - may be used to form GFX slot or DDI + * 10 P_GFX_[T,R]X[P,N]2 - may be used to form GFX slot or DDI + * 11 P_GFX_[T,R]X[P,N]3 - may be used to form GFX slot or DDI + * 12 P_GFX_[T,R]X[P,N]4 - may be used to form GFX slot or DDI + * 13 P_GFX_[T,R]X[P,N]5 - may be used to form GFX slot or DDI + * 14 P_GFX_[T,R]X[P,N]6 - may be used to form GFX slot or DDI + * 15 P_GFX_[T,R]X[P,N]7 - may be used to form GFX slot or DDI + * 16 P_GFX_[T,R]X[P,N]8 - may be used to form GFX slot or DDI + * 17 P_GFX_[T,R]X[P,N]9 - may be used to form GFX slot or DDI + * 18 P_GFX_[T,R]X[P,N]10 - may be used to form GFX slot or DDI + * 19 P_GFX_[T,R]X[P,N]11 - may be used to form GFX slot or DDI + * 20 P_GFX_[T,R]X[P,N]12 - may be used to form GFX slot or DDI + * 21 P_GFX_[T,R]X[P,N]13 - may be used to form GFX slot or DDI + * 22 P_GFX_[T,R]X[P,N]14 - may be used to form GFX slot or DDI + * 23 P_GFX_[T,R]X[P,N]15 - may be used to form GFX slot or DDI + * 24 DP0_TX[P,N]0 - rest is just for DDI (graphics outputs) + * 25 DP0_TX[P,N]1 + * 26 DP0_TX[P,N]2 + * 27 DP0_TX[P,N]3 + * 28 DP1_TX[P,N]0 + * 29 DP1_TX[P,N]1 + * 30 DP1_TX[P,N]2 + * 31 DP1_TX[P,N]3 + * 32 DP2_TX[P,N]0 + * 33 DP2_TX[P,N]1 + * 34 DP2_TX[P,N]2 + * 35 DP2_TX[P,N]3 + * 36 DP2_TX[P,N]4 + * 37 DP2_TX[P,N]5 + * 38 DP2_TX[P,N]6 + */ + +static const PCIe_PORT_DESCRIPTOR PortList[] = { + /* PCIe port, Lanes 8:23, PCI Device Number 2, blue x16 slot */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 8, 23), + PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 2, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 1) + }, + /* PCIe port, Lanes 4:7, PCI Device Number 4, black x16 slot (in fact x4) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 7), + PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 4, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 1) + }, + /* PCIe port, Lanes 0:3, UMI link to SB, PCI Device Number 8 */ + { + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 0, 3), + PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 8, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0) + }, +}; + +/* + * It is not known, if the setup is complete. + * + * Tested and works: VGA/DVI + * Untested: HDMI + */ +static const PCIe_DDI_DESCRIPTOR DdiList[] = { + // DP0 to HDMI0/DP + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 24, 27), + PCIE_DDI_DATA_INITIALIZER(ConnectorTypeHDMI, Aux1, Hdp1) + }, + // DP1 to FCH + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 28, 31), + PCIE_DDI_DATA_INITIALIZER(ConnectorTypeNutmegDpToVga, Aux2, Hdp2) + }, + // DP2 to HDMI1/DP + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 32, 35), + PCIE_DDI_DATA_INITIALIZER(ConnectorTypeHDMI, Aux3, Hdp3) + }, +}; + +static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { + .Flags = DESCRIPTOR_TERMINATE_LIST, + .SocketId = 0, + .PciePortList = PortList, + .DdiLinkList = DdiList, +}; + +void board_BeforeInitReset(struct sysinfo *cb, AMD_RESET_PARAMS *Reset) +{ + FCH_RESET_INTERFACE *FchReset = &Reset->FchInterface; + FchReset->Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchReset->Xhci1Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); +} + +void board_BeforeInitEarly(struct sysinfo *cb, AMD_EARLY_PARAMS *InitEarly) +{ + InitEarly->GnbConfig.PcieComplexList = &PcieComplex; + InitEarly->GnbConfig.PsppPolicy = 0; +} + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ + +static CONST PSO_ENTRY ROMDATA MemoryTable_XM_E[] = { + + NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, 1), + NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, 2), + + PSO_END +}; + +void board_BeforeInitPost(struct sysinfo *cb, AMD_POST_PARAMS *InitPost) +{ + if (IS_ENABLED(CONFIG_BOARD_ASUS_A88XM_E)) + InitPost->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *) MemoryTable_XM_E; +} + +void board_BeforeInitMid(struct sysinfo *cb, AMD_MID_PARAMS *InitMid) +{ + /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ + InitMid->GnbMidConfiguration.iGpuVgaMode = 0; +} diff --git a/src/mainboard/asus/a88xm-e/OptionsIds.h b/src/mainboard/asus/a88xm-e/OptionsIds.h new file mode 100644 index 0000000..b45f5a8 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/OptionsIds.h @@ -0,0 +1,59 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +//#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_CONTROL_ENABLED TRUE +#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE +//#define IDSOPT_PERF_ANALYSIS TRUE +#define IDSOPT_ASSERT_ENABLED TRUE +//#undef IDSOPT_DEBUG_ENABLED +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/asus/a88xm-e/acpi/cpstate.asl b/src/mainboard/asus/a88xm-e/acpi/cpstate.asl new file mode 100644 index 0000000..69de2d8 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/acpi/cpstate.asl @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +#include <arch/acpi.h> +DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001) + { + Scope (\_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package() + { + 0x00000D48, + 0x00011170, + 0x00000004, + 0x00000004, + 0x00000000, + 0x00000000 + }, + + Package() + { + 0x00000AF0, + 0x0000C544, + 0x00000004, + 0x00000004, + 0x00000001, + 0x00000001 + }, + + Package() + { + 0x000009C4, + 0x0000B3B0, + 0x00000004, + 0x00000004, + 0x00000002, + 0x00000002 + }, + + Package() + { + 0x00000898, + 0x0000ABE0, + 0x00000004, + 0x00000004, + 0x00000003, + 0x00000003 + }, + + Package() + { + 0x00000708, + 0x0000A410, + 0x00000004, + 0x00000004, + 0x00000004, + 0x00000004 + }, + + Package() + { + 0x00000578, + 0x00006F54, + 0x00000004, + 0x00000004, + 0x00000005, + 0x00000005 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/asus/a88xm-e/acpi/gpe.asl b/src/mainboard/asus/a88xm-e/acpi/gpe.asl new file mode 100644 index 0000000..297db37 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/acpi/gpe.asl @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Scope(\_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\\_GPE\\_L00\n") */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\\_GPE\\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\\_GPE\\_L09\n") */ + /* Notify (\_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\\_GPE\\_L0B\n") */ + Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\\_GPE\\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\\_GPE\\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\\_GPE\\_L18\n") */ + Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\\_GPE\\_L1B\n") */ + Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ diff --git a/src/mainboard/asus/a88xm-e/acpi/mainboard.asl b/src/mainboard/asus/a88xm-e/acpi/mainboard.asl new file mode 100644 index 0000000..8398c88 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/acpi/mainboard.asl @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ + Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ diff --git a/src/mainboard/asus/a88xm-e/acpi/routing.asl b/src/mainboard/asus/a88xm-e/acpi/routing.asl new file mode 100644 index 0000000..0af6b42 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/acpi/routing.asl @@ -0,0 +1,258 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + /* Routing is in System Bus scope */ + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - F15 Host Controller */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, INTB, 0 }, + Package(){0x0001FFFF, 1, INTC, 0 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x16 slot */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + + /* Bus 0, Dev 4 - PCIe Bridge for 4x slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0 + * EHCI @ func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* SB devices */ + /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, INTC, 0 }, + Package(){0x0010FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* Bus 0, Dev 21 Pcie Bridge */ + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - F15 Host Controller */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, 0, 17 }, + Package(){0x0001FFFF, 1, 0, 18 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot */ + Package(){0x0002FFFF, 0, 0, 18 }, + Package(){0x0002FFFF, 1, 0, 19 }, + Package(){0x0002FFFF, 2, 0, 16 }, + Package(){0x0002FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + + /* Bus 0, Dev 4 - PCIe Bridge for x4 PCIe Slot black */ + Package(){0x0004FFFF, 0, 0, 16 }, + Package(){0x0004FFFF, 1, 0, 17 }, + Package(){0x0004FFFF, 2, 0, 18 }, + Package(){0x0004FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + + /* SB devices in APIC mode */ + /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0 + * EHCI @ func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, 0, 0x12}, + Package(){0x0010FFFF, 1, 0, 0x11}, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 21 PCIE Bridge */ + Package(){0x0015FFFF, 0, 0, 17 }, + Package(){0x0015FFFF, 1, 0, 18 }, + Package(){0x0015FFFF, 2, 0, 19 }, + Package(){0x0015FFFF, 3, 0, 16 }, + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + /* black slot */ + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PBR0, Package(){ + /* PCIx1 on SB */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(ABR0, Package(){ + /* PCIx1 on SB */ + Package(){0x0000FFFF, 0, 0, 0x10 }, + Package(){0x0000FFFF, 1, 0, 0x11 }, + Package(){0x0000FFFF, 2, 0, 0x12 }, + Package(){0x0000FFFF, 3, 0, 0x13 }, + }) + + Name(PBR1, Package(){ + /* Onboard network */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(ABR1, Package(){ + /* Onboard network */ + Package(){0x0000FFFF, 0, 0, 0x11 }, + Package(){0x0000FFFF, 1, 0, 0x12 }, + Package(){0x0000FFFF, 2, 0, 0x13 }, + Package(){0x0000FFFF, 3, 0, 0x10 }, + }) + + /* SB PCI Bridge */ + Name(PCIB, Package(){ + /* PCI slots: slot 0 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + }) diff --git a/src/mainboard/asus/a88xm-e/acpi/sata.asl b/src/mainboard/asus/a88xm-e/acpi/sata.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/acpi/sata.asl diff --git a/src/mainboard/asus/a88xm-e/acpi/si.asl b/src/mainboard/asus/a88xm-e/acpi/si.asl new file mode 100644 index 0000000..ff0c3cf --- /dev/null +++ b/src/mainboard/asus/a88xm-e/acpi/si.asl @@ -0,0 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + Scope(\_SI) { + Method(_SST, 1) { + /* DBGO("\\_SI\\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ diff --git a/src/mainboard/asus/a88xm-e/acpi/sleep.asl b/src/mainboard/asus/a88xm-e/acpi/sleep.asl new file mode 100644 index 0000000..08b7de4 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/acpi/sleep.asl @@ -0,0 +1,96 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* \_PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ +Method(\_PTS, 1) { + /* DBGO("\\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\_SB.SBRI, 0x13)) { + * Store(0,\_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + + Store (0x07, UPWS) +} /* End Method(\_PTS) */ + +/* +* \_BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(\_BFS, 1) { + /* DBGO("\\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* \_WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(\_WAK, 1) { + /* DBGO("\\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + Return(WKST) +} /* End Method(\_WAK) */ diff --git a/src/mainboard/asus/a88xm-e/acpi/superio.asl b/src/mainboard/asus/a88xm-e/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/acpi/superio.asl diff --git a/src/mainboard/asus/a88xm-e/acpi/thermal.asl b/src/mainboard/asus/a88xm-e/acpi/thermal.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/acpi/thermal.asl diff --git a/src/mainboard/asus/a88xm-e/acpi/usb_oc.asl b/src/mainboard/asus/a88xm-e/acpi/usb_oc.asl new file mode 100644 index 0000000..f5d6980 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/acpi/usb_oc.asl @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) diff --git a/src/mainboard/asus/a88xm-e/acpi_tables.c b/src/mainboard/asus/a88xm-e/acpi_tables.c new file mode 100644 index 0000000..f94fde0 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/acpi_tables.c @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <string.h> + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write Hudson IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); + /* 1: LINT1 connect to NMI */ + + return current; +} diff --git a/src/mainboard/asus/a88xm-e/board_info.txt b/src/mainboard/asus/a88xm-e/board_info.txt new file mode 100644 index 0000000..bc090ff --- /dev/null +++ b/src/mainboard/asus/a88xm-e/board_info.txt @@ -0,0 +1,7 @@ +Category: desktop +Board URL: https://www.asus.com/Motherboards/A88XME/ +ROM package: DIP8 +ROM protocol: [http://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flas… SPI] +ROM socketed: y +Flashrom support: y (without AmdSpiRomProtect modules) +Release year: 2014 diff --git a/src/mainboard/asus/a88xm-e/buildOpts.c b/src/mainboard/asus/a88xm-e/buildOpts.c new file mode 100644 index 0000000..c324532 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/buildOpts.c @@ -0,0 +1,346 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + */ + +#include <stdlib.h> + +#include <vendorcode/amd/agesa/f15tn/AGESA.h> + +/* Include the files that instantiate the configuration definitions. */ +#include <vendorcode/amd/agesa/f15tn/Include/AdvancedApi.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuFamilyTranslation.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatures.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> +/* the next two headers depend on heapManager.h */ +#include <vendorcode/amd/agesa/f15tn/Proc/Common/CreateStruct.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuEarlyInit.h> +/* These tables are optional and may be used to adjust memory timing settings */ +#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mm.h> +#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mn.h> + + +/* Select the CPU family. */ +#define INSTALL_FAMILY_10_SUPPORT FALSE +#define INSTALL_FAMILY_12_SUPPORT FALSE +#define INSTALL_FAMILY_14_SUPPORT FALSE +#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE + +/* Select the CPU socket type. */ +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP2_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT FALSE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE + +#define INSTALL_FM2_SOCKET_SUPPORT TRUE + +//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_SODIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_ECC_SUPPORT TRUE +//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE +#define BLDOPT_REMOVE_SRAT FALSE //TRUE +#define BLDOPT_REMOVE_SLIT FALSE //TRUE +#define BLDOPT_REMOVE_WHEA FALSE //TRUE +#define BLDOPT_REMOVE_CRAT TRUE +#define BLDOPT_REMOVE_DMI TRUE +//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE + +//This element selects whether P-States should be forced to be independent, +// as reported by the ACPI _PSD object. For single-link processors, +// setting TRUE for OS to support this feature. + +//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER +/* Build configuration values here. + */ +#define BLDCFG_VRM_CURRENT_LIMIT 90000 +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0 +#define BLDCFG_PLAT_NUM_IO_APICS 3 +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_MEM_INIT_PSTATE 0 + +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE + +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +#define BLDCFG_ONLINE_SPARE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1600_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +#define BLDCFG_ENABLE_ECC_FEATURE FALSE +#define BLDCFG_ECC_REDIRECTION FALSE +#define BLDCFG_SCRUB_DRAM_RATE 0 +#define BLDCFG_SCRUB_L2_RATE 0 +#define BLDCFG_SCRUB_L3_RATE 0 +#define BLDCFG_SCRUB_IC_RATE 0 +#define BLDCFG_SCRUB_DC_RATE 0 +#define BLDCFG_ECC_SYMBOL_SIZE 4 +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 +#define BLDCFG_ECC_SYNC_FLOOD FALSE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +#define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 36 // PCIE Spread Spectrum default value 0.36% +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 + +#define BLDOPT_REMOVE_ALIB FALSE +#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto +#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' +#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 + +#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200 +#define BLDCFG_CFG_ABM_SUPPORT 0 + +//#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 + +// Specify the default values for the VRM controlling the VDDNB plane. +// If not specified, the values used for the core VRM will be applied +//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L +//#define BLDCFG_VRM_NB_SLEW_RATE 5000 // Used in calculating the VSRampSlamTime +//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity + +#define BLDCFG_VRM_NB_CURRENT_LIMIT 60000 + +#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3 +#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3 + +#if IS_ENABLED(CONFIG_GFXUMA) +#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED +#define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED +//#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/ +#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000//512M +#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE +#endif + +#define BLDCFG_IOMMU_SUPPORT TRUE + +#define BLDCFG_CFG_GNB_HD_AUDIO TRUE +//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID +//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID +//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID + +/* Process the options... + * This file include MUST occur AFTER the user option selection settings + */ +/* + * Customized OEM build configurations for FCH component + */ +// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 +// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 +// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 +// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 +// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 +// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 +// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 +// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 +// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 +// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 +// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 +// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 +// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 +// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 +// #define BLDCFG_AZALIA_SSID 0x780D1022 +// #define BLDCFG_SMBUS_SSID 0x780B1022 +// #define BLDCFG_IDE_SSID 0x780C1022 +// #define BLDCFG_SATA_AHCI_SSID 0x78011022 +// #define BLDCFG_SATA_IDE_SSID 0x78001022 +// #define BLDCFG_SATA_RAID5_SSID 0x78031022 +// #define BLDCFG_SATA_RAID_SSID 0x78021022 +// #define BLDCFG_EHCI_SSID 0x78081022 +// #define BLDCFG_OHCI_SSID 0x78071022 +// #define BLDCFG_LPC_SSID 0x780E1022 +// #define BLDCFG_SD_SSID 0x78061022 +// #define BLDCFG_XHCI_SSID 0x78121022 +// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE +// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 +// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE + +CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, + { CPU_LIST_TERMINAL } +}; + +#define BLDCFG_AP_MTRR_SETTINGS_LIST &TrinityApMtrrSettingsList + + // This is the delivery package title, "BrazosPI" + // This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + + // This is the release version number of the AGESA component + // This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define DDR2100_FREQUENCY 1050 ///< DDR 2100 +#define DDR2133_FREQUENCY 1066 ///< DDR 2133 +#define DDR2400_FREQUENCY 1200 ///< DDR 2400 +#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency + +/* QUANDRANK_TYPE*/ +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/* USER_MEMORY_TIMING_MODE */ +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/* POWER_DOWN_MODE */ +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 +#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 +/* The AGESA likes to enable 512 bytes region on this base for LPC bus */ +#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 +#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 +#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 +#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 +#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 +#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 +#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 +#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 +#define DFLT_HPET_BASE_ADDRESS 0xFED00000 +#define DFLT_SMI_CMD_PORT 0xB0 +#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 +#define DFLT_GEC_BASE_ADDRESS 0xFED61000 +#define DFLT_AZALIA_SSID 0x780D1022 +#define DFLT_SMBUS_SSID 0x780B1022 +#define DFLT_IDE_SSID 0x780C1022 +#define DFLT_SATA_AHCI_SSID 0x78011022 +#define DFLT_SATA_IDE_SSID 0x78001022 +#define DFLT_SATA_RAID5_SSID 0x78031022 +#define DFLT_SATA_RAID_SSID 0x78021022 +#define DFLT_EHCI_SSID 0x78081022 +#define DFLT_OHCI_SSID 0x78071022 +#define DFLT_LPC_SSID 0x780E1022 +#define DFLT_SD_SSID 0x78061022 +#define DFLT_XHCI_SSID 0x78121022 +#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE +#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +#define DFLT_FCH_GPP_LINK_CONFIG PortA1B1C1D1 +#define DFLT_FCH_GPP_PORT0_PRESENT TRUE +#define DFLT_FCH_GPP_PORT1_PRESENT TRUE +#define DFLT_FCH_GPP_PORT2_PRESENT FALSE +#define DFLT_FCH_GPP_PORT3_PRESENT FALSE +#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE +//#define BLDCFG_IR_PIN_CONTROL 0x33 +//#define FCH_NO_XHCI_SUPPORT FALSE +GPIO_CONTROL a88xm_e_gpio[] = { +// {183, Function1, PullUpB}, + {-1} +}; +#define BLDCFG_FCH_GPIO_CONTROL_LIST (&a88xm_e_gpio[0]) + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +/* Moving this include up will break AGESA. */ +#include <PlatformInstall.h> diff --git a/src/mainboard/asus/a88xm-e/cmos.layout b/src/mainboard/asus/a88xm-e/cmos.layout new file mode 100644 index 0000000..e1dbd9a --- /dev/null +++ b/src/mainboard/asus/a88xm-e/cmos.layout @@ -0,0 +1,66 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +#***************************************************************************** + +entries + +0 384 r 0 reserved_memory +384 1 e 4 boot_option +388 4 h 0 reboot_counter +#392 3 r 0 unused +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +456 1 e 1 ECC_memory +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +6 5 Notice +6 6 Info +6 7 Debug +6 8 Spew +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/a88xm-e/devicetree_a88xm-e.cb b/src/mainboard/asus/a88xm-e/devicetree_a88xm-e.cb new file mode 100644 index 0000000..e2b0eea --- /dev/null +++ b/src/mainboard/asus/a88xm-e/devicetree_a88xm-e.cb @@ -0,0 +1,143 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +chip northbridge/amd/agesa/family15tn/root_complex + + device cpu_cluster 0 on + chip cpu/amd/agesa/family15tn + device lapic 10 on end + end + end + + device domain 0 on + subsystemid 0x1022 0x1410 inherit + chip northbridge/amd/agesa/family15tn # CPU side of HT root complex + + chip northbridge/amd/agesa/family15tn # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 on end # Internal Graphics + device pci 1.1 on end # Internal Audio (iGPU) + device pci 2.0 on end # PCIE x4/x16 yellow (?) + device pci 3.0 on end # unused? + device pci 4.0 on end # PCIE x4/x16 yellow (?) + device pci 5.0 off end # unused + device pci 6.0 off end # unused? + device pci 7.0 off end # LAN + device pci 8.0 off end # NB/SB Link P2P bridge + end #chip northbridge/amd/agesa/family15tn # PCI side of HT root complex + + chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 + device pci 10.1 on end # XHCI HC1 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SMBUS + chip drivers/generic/generic #dimm 0 + device i2c 50 on end # 7-bit SPD address + end + chip drivers/generic/generic #dimm 1 + device i2c 51 on end # 7-bit SPD address + end + end # SM + device pci 14.1 off end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/ite/it8728f + register "TMPIN1.mode" = "THERMAL_RESISTOR" + register "TMPIN2.mode" = "THERMAL_RESISTOR" + register "TMPIN3.mode" = "THERMAL_RESISTOR" + + register "FAN1.mode" = "FAN_SMART_AUTOMATIC" + register "FAN1.smart.tmpin" = "1" + register "FAN1.smart.tmp_off" = "0x80" # never + register "FAN1.smart.tmp_start" = "20" + register "FAN1.smart.tmp_full" = "70" + register "FAN1.smart.tmp_delta" = "0" + register "FAN1.smart.smoothing" = "1" + register "FAN1.smart.pwm_start" = "20" + register "FAN1.smart.slope" = "32" + + # Enable tacho reading for chassis fan. + register "FAN2.mode" = "FAN_MODE_OFF" + + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Env Controller + io 0x60 = 0x290 + io 0x62 = 0x220 + irq 0x70 = 0 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 off # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0x228 #SMI + io 0x62 = 0x300 #Simple I/O + io 0x64 = 0x238 #Phony resource IT8603E does not have it + irq 0x70 = 0 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8728f + end # + device pci 14.3 off end # LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 off end # USB 2 + device pci 14.6 off end # Gec + device pci 14.7 off end # SD + device pci 15.0 on end # PCIe 0 - onboard PCIe 1x + device pci 15.1 off end # unused + device pci 15.2 on end # PCI bridge + device pci 15.3 off end # unused + end #chip southbridge/amd/agesa/hudson + + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + + register "spdAddrLookup" = " + { + { {0xA0, 0x00}, {0xA2, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family15tn # CPU side of HT root complex + end #domain +end #chip northbridge/amd/agesa/family15tn/root_complex diff --git a/src/mainboard/asus/a88xm-e/dsdt.asl b/src/mainboard/asus/a88xm-e/dsdt.asl new file mode 100644 index 0000000..45a2606 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/dsdt.asl @@ -0,0 +1,110 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* DefinitionBlock Statement */ +#include <arch/acpi.h> +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + OEM_ID, + ACPI_TABLE_CREATOR, + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Globals for the platform */ + #include "acpi/mainboard.asl" + + /* Describe the USB Overcurrent pins */ + #include "acpi/usb_oc.asl" + + /* PCI IRQ mapping for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> + + /* Describe the processor tree (\_PR) */ + #include <cpu/amd/agesa/family15tn/acpi/cpu.asl> + + /* Describe the supported Sleep States for this Southbridge */ + #include <southbridge/amd/common/acpi/sleepstates.asl> + + /* Describe the Sleep Methods (WAK, PTS, GTS, etc.) for this platform */ + #include "acpi/sleep.asl" + + Scope(\_SB) { + /* global utility methods expected within the \_SB scope */ + #include <arch/x86/acpi/globutil.asl> + + /* Describe IRQ Routing mapping for this platform (within the \_SB scope) */ + #include "acpi/routing.asl" + + Device(PWRB) { + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) + Name(_STA, 0x0B) + } + + Device(PCI0) { + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family15tn/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/fch.asl> + + /** + * TODO: The devices listed here (SBR0 and SBR1) do not appear to + * be referenced anywhere and could possibly be removed. + */ + Device(SBR0) { /* PCIe 1x SB */ + Name(_ADR, 0x00150000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(ABR0) } /* APIC mode */ + Return (PBR0) /* PIC mode */ + } + } + + Device(SBR1) { /* Onboard network */ + Name(_ADR, 0x00150001) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT, 0) { + If(PMOD){ Return(ABR1) } /* APIC mode */ + Return (PBR1) /* PIC mode */ + } + } + } + + /* Describe PCI INT[A-H] for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> + + } /* End Scope(_SB) */ + + /* Describe SMBUS for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> + + /* Define the General Purpose Events for the platform */ + #include "acpi/gpe.asl" + + /* Define the Thermal zones and methods for the platform */ + #include "acpi/thermal.asl" + + /* Define the System Indicators for the platform */ + #include "acpi/si.asl" + +} +/* End of ASL file */ diff --git a/src/mainboard/asus/a88xm-e/irq_tables.c b/src/mainboard/asus/a88xm-e/irq_tables.c new file mode 100644 index 0000000..88d2160 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/irq_tables.c @@ -0,0 +1,101 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <device/pci_def.h> +#include <stdint.h> +#include <string.h> + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/asus/a88xm-e/mainboard.c b/src/mainboard/asus/a88xm-e/mainboard.c new file mode 100644 index 0000000..2a0e618 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/mainboard.c @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/msr.h> +#include <device/device.h> + +/************************************************* + * enable the dedicated function in thatcher board. + *************************************************/ +static void mainboard_enable(struct device *dev) +{ + msr_t msr; + + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + msr = rdmsr(LS_CFG_MSR); + msr.lo &= ~(1 << 28); + wrmsr(LS_CFG_MSR, msr); + + msr = rdmsr(DC_CFG_MSR); + msr.lo &= ~(1 << 4); + msr.lo &= ~(1 << 13); + wrmsr(DC_CFG_MSR, msr); + + msr = rdmsr(BU_CFG_MSR); + msr.lo &= ~(1 << 23); + wrmsr(BU_CFG_MSR, msr); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/asus/a88xm-e/mptable.c b/src/mainboard/asus/a88xm-e/mptable.c new file mode 100644 index 0000000..d97663d --- /dev/null +++ b/src/mainboard/asus/a88xm-e/mptable.c @@ -0,0 +1,181 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/smp/mpspec.h> +#include <cpu/x86/lapic.h> +#include <device/pci.h> +#include <stdint.h> +#include <string.h> +#include <southbridge/amd/agesa/hudson/hudson.h> + +u8 picr_data[] = { + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x0A,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F +}; +u8 intr_data[0x54] = { + 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) +{ + mc->mpc_length += length; + mc->mpc_entry_count++; +} + +static void my_smp_write_bus(struct mp_config_table *mc, + unsigned char id, const char *bustype) +{ + struct mpc_config_bus *mpc; + mpc = smp_next_mpc_entry(mc); + memset(mpc, '\0', sizeof(*mpc)); + mpc->mpc_type = MP_BUS; + mpc->mpc_busid = id; + memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); + smp_add_mpc_entry(mc, sizeof(*mpc)); +} + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + u8 byte; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + //mptable_write_buses(mc, NULL, &bus_isa); + my_smp_write_bus(mc, 0, "PCI "); + my_smp_write_bus(mc, 1, "PCI "); + bus_isa = 0x02; + my_smp_write_bus(mc, bus_isa, "ISA "); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR); + + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, int_sign, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) + + /* IOMMU */ + PCI_INT(0x0, 0x0, 0x0, 0x10); + PCI_INT(0x0, 0x0, 0x1, 0x11); + PCI_INT(0x0, 0x0, 0x2, 0x12); + PCI_INT(0x0, 0x0, 0x3, 0x13); + + /* Internal VGA */ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + /* SMBUS */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + + /* HD Audio */ + PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); + + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + struct device *dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0. */ + PCI_INT(bus_pci, 0x5, 0x0, 0x14); + PCI_INT(bus_pci, 0x5, 0x1, 0x15); + PCI_INT(bus_pci, 0x5, 0x2, 0x16); + PCI_INT(bus_pci, 0x5, 0x3, 0x17); + } + + /* PCIe Lan*/ + PCI_INT(0x0, 0x06, 0x0, 0x13); + + /* FCH PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* FCH PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* FCH PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* FCH PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/a88xm-e/romstage.c b/src/mainboard/asus/a88xm-e/romstage.c new file mode 100644 index 0000000..0a85c27 --- /dev/null +++ b/src/mainboard/asus/a88xm-e/romstage.c @@ -0,0 +1,102 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2012 Rudolf Marek <r.marek(a)assembler.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/io.h> + +#include <northbridge/amd/agesa/state_machine.h> +#include <southbridge/amd/common/amd_defs.h> +#include <southbridge/amd/agesa/hudson/hudson.h> +#include <southbridge/amd/agesa/hudson/smbus.h> +#include <stdint.h> +#include <string.h> + +#include <superio/ite/common/ite.h> +#include <superio/ite/it8728f/it8728f.h> + +#define MMIO_NON_POSTED_START 0xfed00000 +#define MMIO_NON_POSTED_END 0xfedfffff +#define SB_MMIO_MISC32(x) *(volatile u32 *)(AMD_SB_ACPI_MMIO_ADDR + 0xE00 + (x)) + +static void sbxxx_enable_48mhzout(void) +{ + /* most likely programming to 48MHz out signal */ + u32 reg32; + reg32 = SB_MMIO_MISC32(0x28); + reg32 &= 0xffc7ffff; + reg32 |= 0x00100000; + SB_MMIO_MISC32(0x28) = reg32; + + reg32 = SB_MMIO_MISC32(0x40); + reg32 &= ~0x80u; + SB_MMIO_MISC32(0x40) = reg32; +} + +static void superio_init_e(void) +{ + pnp_devfn_t uart = PNP_DEV(0x2e, IT8728F_SP1); + pnp_devfn_t gpio = PNP_DEV(0x2e, IT8728F_GPIO); + + ite_kill_watchdog(gpio); + ite_enable_serial(uart, CONFIG_TTYS0_BASE); + ite_enable_3vsbsw(gpio); +} + +void board_BeforeAgesa(struct sysinfo *cb) +{ + u8 byte; + pci_devfn_t dev; + + if (IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE)) + hudson_pci_port80(); + else if (IS_ENABLED(CONFIG_POST_DEVICE_LPC)) + hudson_lpc_port80(); + + /* enable SIO LPC decode */ + dev = PCI_DEV(0, 0x14, 3); + byte = pci_read_config8(dev, 0x48); + byte |= 3; /* 2e, 2f */ + pci_write_config8(dev, 0x48, byte); + + /* enable serial decode */ + byte = pci_read_config8(dev, 0x44); + byte |= (1 << 6); /* 0x3f8 */ + pci_write_config8(dev, 0x44, byte); + + post_code(0x30); + + /* enable SB MMIO space */ + outb(0x24, 0xcd6); + outb(0x1, 0xcd7); + + /* enable SIO clock */ + sbxxx_enable_48mhzout(); + + if (IS_ENABLED(CONFIG_BOARD_ASUS_A88XM_E)) + superio_init_e(); + + /* turn on secondary smbus at b20 */ + outb(0x28, 0xcd6); + byte = inb(0xcd7); + byte |= 1; + outb(byte, 0xcd7); + + /* set DDR3 voltage */ + byte = CONFIG_BOARD_ASUS_A88XM_E_DDR3_VOLT_VAL; + + /* default is byte = 0x0, so no need to set it in this case */ + if (byte) + do_smbus_write_byte(0xb20, 0x15, 0x3, byte); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/30987 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I60fa0636ba41f5f1a6a3faa2764bf2f0a968cf90 Gerrit-Change-Number: 30987 Gerrit-PatchSet: 1 Gerrit-Owner: Balázs Vinarz <vinibali1(a)gmail.com> Gerrit-MessageType: newchange

9 252

Change in coreboot[master]: amd_blobs: Always set default paths
by Nico Huber (Code Review) 05 Dec '20

05 Dec '20

Hello Marshall Dawson, Richard Spiegel, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/38044 to review the following change. Change subject: amd_blobs: Always set default paths ...................................................................... amd_blobs: Always set default paths Don't make the default paths to AMD blobs depend on USE_AMD_BLOBS. This way we get error messages about the missing files when the blobs repos aren't checked out. Change-Id: I754fdc5e1414c8a3dc88b364bcfbea9a26b59eb0 Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M src/soc/amd/stoneyridge/Kconfig M src/vendorcode/amd/pi/Kconfig 2 files changed, 5 insertions(+), 8 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/44/38044/1 diff --git a/src/soc/amd/stoneyridge/Kconfig b/src/soc/amd/stoneyridge/Kconfig index a03b8f3..cc7354f 100644 --- a/src/soc/amd/stoneyridge/Kconfig +++ b/src/soc/amd/stoneyridge/Kconfig @@ -155,7 +155,6 @@ config VGA_BIOS_FILE string - default "" if !USE_AMD_BLOBS default "3rdparty/amd_blobs/stoneyridge/CarrizoGenericVbios.bin" if AMD_APU_MERLINFALCON default "3rdparty/amd_blobs/stoneyridge/StoneyGenericVbios.bin" if AMD_APU_PRAIRIEFALCON default "3rdparty/amd_blobs/stoneyridge/StoneyGenericVbios.bin" if AMD_APU_STONEYRIDGE @@ -197,7 +196,6 @@ config STONEYRIDGE_XHCI_FWM_FILE string "XHCI firmware path and filename" - default "" if !USE_AMD_BLOBS default "3rdparty/amd_blobs/stoneyridge/xhci.bin" depends on STONEYRIDGE_XHCI_FWM @@ -207,7 +205,6 @@ config AMD_PUBKEY_FILE string "AMD public Key" - default "" if !USE_AMD_BLOBS default "3rdparty/amd_blobs/stoneyridge/PSP/CZ/AmdPubKeyCZ.bin" if AMD_APU_MERLINFALCON default "3rdparty/amd_blobs/stoneyridge/PSP/ST/AmdPubKeyST.bin" if AMD_APU_PRAIRIEFALCON default "3rdparty/amd_blobs/stoneyridge/PSP/ST/AmdPubKeyST.bin" if AMD_APU_STONEYRIDGE diff --git a/src/vendorcode/amd/pi/Kconfig b/src/vendorcode/amd/pi/Kconfig index 9dcdf34..ee2958a 100644 --- a/src/vendorcode/amd/pi/Kconfig +++ b/src/vendorcode/amd/pi/Kconfig @@ -43,9 +43,9 @@ string "AGESA PI binary file name" default "3rdparty/blobs/pi/amd/00630F01/FP3/AGESA.bin" if CPU_AMD_PI_00630F01 default "3rdparty/blobs/pi/amd/00730F01/FT3b/AGESA.bin" if CPU_AMD_PI_00730F01 - default "3rdparty/amd_blobs/stoneyridge/pi/CZ/$(CONFIG_AMD_SOC_PACKAGE)/AGESA.bin" if AMD_APU_MERLINFALCON && USE_AMD_BLOBS - default "3rdparty/amd_blobs/stoneyridge/pi/ST/$(CONFIG_AMD_SOC_PACKAGE)/AGESA.bin" if AMD_APU_PRAIRIEFALCON && USE_AMD_BLOBS - default "3rdparty/amd_blobs/stoneyridge/pi/ST/$(CONFIG_AMD_SOC_PACKAGE)/AGESA.bin" if AMD_APU_STONEYRIDGE && USE_AMD_BLOBS + default "3rdparty/amd_blobs/stoneyridge/pi/CZ/$(CONFIG_AMD_SOC_PACKAGE)/AGESA.bin" if AMD_APU_MERLINFALCON + default "3rdparty/amd_blobs/stoneyridge/pi/ST/$(CONFIG_AMD_SOC_PACKAGE)/AGESA.bin" if AMD_APU_PRAIRIEFALCON + default "3rdparty/amd_blobs/stoneyridge/pi/ST/$(CONFIG_AMD_SOC_PACKAGE)/AGESA.bin" if AMD_APU_STONEYRIDGE default "3rdparty/blobs/pi/amd/00660F01/FP4/AGESA.bin" if CPU_AMD_PI_00660F01 help Specify the binary file to use for AMD platform initialization. @@ -70,7 +70,7 @@ config AGESA_PRE_MEMORY_BINARY_PI_FILE string "Pre memory Binary PI file name" depends on AGESA_SPLIT_MEMORY_FILES - default "3rdparty/blobs/pi/amd/00670F00/FT4/AGESA_premem.elf" if SOC_AMD_STONEYRIDGE && USE_AMD_BLOBS + default "3rdparty/blobs/pi/amd/00670F00/FT4/AGESA_premem.elf" if SOC_AMD_STONEYRIDGE # FIXME: File doesn't exist help Specify the binary file to use for pre-memory AMD platform initialization. @@ -78,7 +78,7 @@ config AGESA_POST_MEMORY_BINARY_PI_FILE string "Post memory Binary PI file name" depends on AGESA_SPLIT_MEMORY_FILES - default "3rdparty/blobs/pi/amd/00670F00/FT4/AGESA_postmem.elf" if SOC_AMD_STONEYRIDGE && USE_AMD_BLOBS + default "3rdparty/blobs/pi/amd/00670F00/FT4/AGESA_postmem.elf" if SOC_AMD_STONEYRIDGE # FIXME: File doesn't exist help Specify the binary file to use for post-memory AMD platform initialization. -- To view, visit https://review.coreboot.org/c/coreboot/+/38044 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I754fdc5e1414c8a3dc88b364bcfbea9a26b59eb0 Gerrit-Change-Number: 38044 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-Reviewer: Marshall Dawson <marshalldawson3rd(a)gmail.com> Gerrit-Reviewer: Richard Spiegel <richard.spiegel(a)silverbackltd.com> Gerrit-MessageType: newchange

4 10

Change in coreboot[master]: src/soc/tigerlake: Define and use a Kconfig for no of USB ports.
by Meera Ravindranath (Code Review) 03 Dec '20

03 Dec '20

Meera Ravindranath has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38682 ) Change subject: src/soc/tigerlake: Define and use a Kconfig for no of USB ports. ...................................................................... src/soc/tigerlake: Define and use a Kconfig for no of USB ports. BUG=None BRANCH=None TEST=Compilation for jasper lake board is working Change-Id: Ia8e88e92989fe40d7bd1c28942e005cb0d862fcb Signed-off-by: Meera Ravindranath <meera.ravindranath(a)intel.com> --- M src/soc/intel/tigerlake/Kconfig M src/soc/intel/tigerlake/fsp_params_jsl.c M src/soc/intel/tigerlake/fsp_params_tgl.c 3 files changed, 14 insertions(+), 4 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/82/38682/1 diff --git a/src/soc/intel/tigerlake/Kconfig b/src/soc/intel/tigerlake/Kconfig index cef1fd0..f50e40e 100644 --- a/src/soc/intel/tigerlake/Kconfig +++ b/src/soc/intel/tigerlake/Kconfig @@ -156,6 +156,16 @@ default 3 if SOC_INTEL_JASPERLAKE default 4 if SOC_INTEL_TIGERLAKE +config SOC_INTEL_USB2_DEV_MAX + int + default 8 if SOC_INTEL_JASPERLAKE + default 10 if SOC_INTEL_TIGERLAKE + +config SOC_INTEL_USB3_DEV_MAX + int + default 6 if SOC_INTEL_JASPERLAKE + default 4 if SOC_INTEL_TIGERLAKE + config SOC_INTEL_I2C_DEV_MAX int default 6 diff --git a/src/soc/intel/tigerlake/fsp_params_jsl.c b/src/soc/intel/tigerlake/fsp_params_jsl.c index 8046b2e..d5d623b 100644 --- a/src/soc/intel/tigerlake/fsp_params_jsl.c +++ b/src/soc/intel/tigerlake/fsp_params_jsl.c @@ -106,7 +106,7 @@ memset(params->PcieRpPmSci, 0, sizeof(params->PcieRpPmSci)); /* USB configuration */ - for (i = 0; i < ARRAY_SIZE(config->usb2_ports); i++) { + for (i = 0; i < CONFIG_SOC_INTEL_USB2_DEV_MAX; i++) { params->PortUsb20Enable[i] = config->usb2_ports[i].enable; params->Usb2OverCurrentPin[i] = config->usb2_ports[i].ocpin; @@ -116,7 +116,7 @@ params->Usb2PhyPehalfbit[i] = config->usb2_ports[i].pre_emp_bit; } - for (i = 0; i < ARRAY_SIZE(config->usb3_ports); i++) { + for (i = 0; i < CONFIG_SOC_INTEL_USB3_DEV_MAX; i++) { params->PortUsb30Enable[i] = config->usb3_ports[i].enable; params->Usb3OverCurrentPin[i] = config->usb3_ports[i].ocpin; diff --git a/src/soc/intel/tigerlake/fsp_params_tgl.c b/src/soc/intel/tigerlake/fsp_params_tgl.c index 305748e..f027ee0 100644 --- a/src/soc/intel/tigerlake/fsp_params_tgl.c +++ b/src/soc/intel/tigerlake/fsp_params_tgl.c @@ -89,7 +89,7 @@ params->IomTypeCPortPadCfg[i] = 0x09000000; /* USB */ - for (i = 0; i < ARRAY_SIZE(config->usb2_ports); i++) { + for (i = 0; i < CONFIG_SOC_INTEL_USB2_DEV_MAX; i++) { params->PortUsb20Enable[i] = config->usb2_ports[i].enable; params->Usb2OverCurrentPin[i] = config->usb2_ports[i].ocpin; params->Usb2PhyPetxiset[i] = config->usb2_ports[i].pre_emp_bias; @@ -98,7 +98,7 @@ params->Usb2PhyPehalfbit[i] = config->usb2_ports[i].pre_emp_bit; } - for (i = 0; i < ARRAY_SIZE(config->usb3_ports); i++) { + for (i = 0; i < CONFIG_SOC_INTEL_USB3_DEV_MAX; i++) { params->PortUsb30Enable[i] = config->usb3_ports[i].enable; params->Usb3OverCurrentPin[i] = config->usb3_ports[i].ocpin; if (config->usb3_ports[i].tx_de_emp) { -- To view, visit https://review.coreboot.org/c/coreboot/+/38682 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ia8e88e92989fe40d7bd1c28942e005cb0d862fcb Gerrit-Change-Number: 38682 Gerrit-PatchSet: 1 Gerrit-Owner: Meera Ravindranath <meera.ravindranath(a)intel.com> Gerrit-MessageType: newchange

7 27

Change in coreboot[master]: arch/x86/car.ld: Check for out of bound on no-XIP stages
by Arthur Heymans (Code Review) 02 Dec '20

02 Dec '20

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36623 ) Change subject: arch/x86/car.ld: Check for out of bound on no-XIP stages ...................................................................... arch/x86/car.ld: Check for out of bound on no-XIP stages Check that stages running in CAR have their start and end in CAR. Change-Id: I292aacce564c23d9ae21aa46c5e2f8784fa6a609 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/arch/x86/car.ld 1 file changed, 5 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/23/36623/1 diff --git a/src/arch/x86/car.ld b/src/arch/x86/car.ld index 6ccbd8c..e68beb3 100644 --- a/src/arch/x86/car.ld +++ b/src/arch/x86/car.ld @@ -119,4 +119,9 @@ #endif #if CONFIG(C_ENVIRONMENT_BOOTBLOCK) _bogus3 = ASSERT(CONFIG_DCACHE_BSP_STACK_SIZE > 0x0, "BSP stack size not configured"); +#if CONFIG(NO_XIP_EARLY_STAGES) && (ENV_ROMSTAGE || ENV_VERSTAGE) +_bogus4 = ASSERT(_eprogram <= _car_region_end, "Stage end too high !"); +_bogus5 = ASSERT(_program >= _car_unallocated_start, "Stage start too low!"); +#endif + #endif -- To view, visit https://review.coreboot.org/c/coreboot/+/36623 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I292aacce564c23d9ae21aa46c5e2f8784fa6a609 Gerrit-Change-Number: 36623 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-MessageType: newchange

3 4

Change in coreboot[master]: arch/x86: Link NO_XIP_EARLY_STAGES like other stages
by Arthur Heymans (Code Review) 30 Nov '20

30 Nov '20

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36612 ) Change subject: arch/x86: Link NO_XIP_EARLY_STAGES like other stages ...................................................................... arch/x86: Link NO_XIP_EARLY_STAGES like other stages If stages are not run XIP they can be linked like other stages, which includes a (*.data) section. Change-Id: Ib165058abfb07e385461cdcca4aef31928ec7572 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/arch/x86/assembly_entry.S M src/arch/x86/car.ld M src/include/rules.h M src/lib/program.ld 4 files changed, 7 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/36612/1 diff --git a/src/arch/x86/assembly_entry.S b/src/arch/x86/assembly_entry.S index c36dc1c..a838b6d 100644 --- a/src/arch/x86/assembly_entry.S +++ b/src/arch/x86/assembly_entry.S @@ -32,7 +32,8 @@ /* reset stack pointer to CAR stack */ mov $_car_stack_end, %esp - /* clear .bss section as it is not shared */ + /* clear .bss section as it is not shared if stages are run XIP*/ +#if !ENV_STAGE_HAS_DATA_SECTION cld xor %eax, %eax movl $(_ebss), %ecx @@ -40,6 +41,7 @@ sub %edi, %ecx shrl $2, %ecx rep stosl +#endif #if ((ENV_VERSTAGE && CONFIG(VERSTAGE_DEBUG_SPINLOOP)) \ || (ENV_ROMSTAGE && CONFIG(ROMSTAGE_DEBUG_SPINLOOP))) diff --git a/src/arch/x86/car.ld b/src/arch/x86/car.ld index 6ccbd8c..a68b635 100644 --- a/src/arch/x86/car.ld +++ b/src/arch/x86/car.ld @@ -69,6 +69,7 @@ * cbmem console. This is useful for clearing this area on a per-stage * basis when more than one stage uses cache-as-ram for CAR_GLOBALs. */ +#if !ENV_STAGE_HAS_DATA_SECTION . = ALIGN(ARCH_POINTER_ALIGN_SIZE); _bss = .; #if ENV_STAGE_HAS_BSS_SECTION @@ -84,6 +85,7 @@ #endif . = ALIGN(ARCH_POINTER_ALIGN_SIZE); _ebss = .; +#endif _car_unallocated_start = .; #if !CONFIG(C_ENVIRONMENT_BOOTBLOCK) diff --git a/src/include/rules.h b/src/include/rules.h index 0436198..fe162f8 100644 --- a/src/include/rules.h +++ b/src/include/rules.h @@ -274,7 +274,7 @@ /* Indicates memory layout is determined with arch/x86/car.ld. */ #define ENV_CACHE_AS_RAM (ENV_ROMSTAGE_OR_BEFORE && !CONFIG(RESET_VECTOR_IN_RAM)) /* No .data sections with execute-in-place from ROM. */ -#define ENV_STAGE_HAS_DATA_SECTION !ENV_CACHE_AS_RAM +#define ENV_STAGE_HAS_DATA_SECTION (!ENV_CACHE_AS_RAM || CONFIG(NO_XIP_EARLY_STAGES)) /* No .bss sections for stage with CAR teardown. */ #define ENV_STAGE_HAS_BSS_SECTION !(ENV_ROMSTAGE && CONFIG(CAR_GLOBAL_MIGRATION)) #else diff --git a/src/lib/program.ld b/src/lib/program.ld index a9d4e48..d323ac1 100644 --- a/src/lib/program.ld +++ b/src/lib/program.ld @@ -125,7 +125,7 @@ } #endif -#if ENV_STAGE_HAS_BSS_SECTION && !ENV_CACHE_AS_RAM +#if ENV_STAGE_HAS_BSS_SECTION && ENV_STAGE_HAS_DATA_SECTION .bss . : { . = ALIGN(ARCH_POINTER_ALIGN_SIZE); _bss = .; -- To view, visit https://review.coreboot.org/c/coreboot/+/36612 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ib165058abfb07e385461cdcca4aef31928ec7572 Gerrit-Change-Number: 36612 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

2 10

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit February 2020