coreboot-gerrit February 2020

coreboot-gerrit@coreboot.org

1 participants
1797 discussions

Change in ...coreboot[master]: mb/apple: Add MacBook Pro 8,1 support
by Evgeny Zinoviev (Code Review) 27 Feb '23

27 Feb '23

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33151 Change subject: mb/apple: Add MacBook Pro 8,1 support ...................................................................... mb/apple: Add MacBook Pro 8,1 support MacBook Pro 13'' Early 2011 (A1278). Works: - Graphics initialization (libgfxinit) - GRUB payload - Linux (it boots) Mostly untested for now. This board has SOIC-8 chip, 25Q064A in my case. WARNING: do not just use a clip to flash the chip as usual. There is a capacitor and a resistor right near the VCC pin. They prevent the clip from being properly attached. You can very easily break them. Either cut off some plasic from the clip so that it doesn't touch them, or don't use clip at all. Change-Id: I7a7dc6d6c16751403ce276d2778dc915cd69f3f2 Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- A src/mainboard/apple/macbookpro8_1/Kconfig A src/mainboard/apple/macbookpro8_1/Kconfig.name A src/mainboard/apple/macbookpro8_1/Makefile.inc A src/mainboard/apple/macbookpro8_1/acpi/ec.asl A src/mainboard/apple/macbookpro8_1/acpi/platform.asl A src/mainboard/apple/macbookpro8_1/acpi/superio.asl A src/mainboard/apple/macbookpro8_1/acpi_tables.c A src/mainboard/apple/macbookpro8_1/board_info.txt A src/mainboard/apple/macbookpro8_1/cmos.default A src/mainboard/apple/macbookpro8_1/cmos.layout A src/mainboard/apple/macbookpro8_1/devicetree.cb A src/mainboard/apple/macbookpro8_1/dsdt.asl A src/mainboard/apple/macbookpro8_1/gpio.c A src/mainboard/apple/macbookpro8_1/hda_verb.c A src/mainboard/apple/macbookpro8_1/mainboard.c A src/mainboard/apple/macbookpro8_1/romstage.c 16 files changed, 816 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/51/33151/1 diff --git a/src/mainboard/apple/macbookpro8_1/Kconfig b/src/mainboard/apple/macbookpro8_1/Kconfig new file mode 100644 index 0000000..c838bea --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/Kconfig @@ -0,0 +1,43 @@ +if BOARD_APPLE_MACBOOKPRO8_1 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select EC_ACPI + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select NORTHBRIDGE_INTEL_SANDYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_BD82X6X + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + select MAINBOARD_HAS_LIBGFXINIT + select GFX_GMA_INTERNAL_IS_LVDS + select HAVE_CMOS_DEFAULT + select HAVE_OPTION_TABLE + +config MAINBOARD_DIR + string + default apple/macbookpro8_1 + +config MAINBOARD_PART_NUMBER + string + default "MacBookPro8,1" + +config VGA_BIOS_FILE + string + default "pci8086,0126.rom" + +config VGA_BIOS_ID + string + default "8086,0126" + +config DRAM_RESET_GATE_GPIO + int + default 28 + +config MAX_CPUS + int + default 8 +endif diff --git a/src/mainboard/apple/macbookpro8_1/Kconfig.name b/src/mainboard/apple/macbookpro8_1/Kconfig.name new file mode 100644 index 0000000..06a7de5 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_APPLE_MACBOOKPRO8_1 + bool "MacBookPro8,1" diff --git a/src/mainboard/apple/macbookpro8_1/Makefile.inc b/src/mainboard/apple/macbookpro8_1/Makefile.inc new file mode 100644 index 0000000..ebe01ae --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/Makefile.inc @@ -0,0 +1,2 @@ +romstage-y += gpio.c +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/apple/macbookpro8_1/acpi/ec.asl b/src/mainboard/apple/macbookpro8_1/acpi/ec.asl new file mode 100644 index 0000000..cd74865 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/acpi/ec.asl @@ -0,0 +1,18 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <ec/apple/acpi/ec.asl> +#include <ec/apple/acpi/ac_60.asl> +#include <ec/apple/acpi/lid_60.asl> diff --git a/src/mainboard/apple/macbookpro8_1/acpi/platform.asl b/src/mainboard/apple/macbookpro8_1/acpi/platform.asl new file mode 100644 index 0000000..3603581 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/acpi/platform.asl @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ +} diff --git a/src/mainboard/apple/macbookpro8_1/acpi/superio.asl b/src/mainboard/apple/macbookpro8_1/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/acpi/superio.asl diff --git a/src/mainboard/apple/macbookpro8_1/acpi_tables.c b/src/mainboard/apple/macbookpro8_1/acpi_tables.c new file mode 100644 index 0000000..6b731cc --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/acpi_tables.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/apple/macbookpro8_1/board_info.txt b/src/mainboard/apple/macbookpro8_1/board_info.txt new file mode 100644 index 0000000..8e0e321 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/board_info.txt @@ -0,0 +1,6 @@ +Category: laptop +ROM protocol: SPI +Flashrom support: n +ROM package: SOIC-8 +ROM socketed: n +Release year: 2011 diff --git a/src/mainboard/apple/macbookpro8_1/cmos.default b/src/mainboard/apple/macbookpro8_1/cmos.default new file mode 100644 index 0000000..53e85a3 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/cmos.default @@ -0,0 +1 @@ +debug_level=Debug diff --git a/src/mainboard/apple/macbookpro8_1/cmos.layout b/src/mainboard/apple/macbookpro8_1/cmos.layout new file mode 100644 index 0000000..aa9f563 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/cmos.layout @@ -0,0 +1,114 @@ +## +## This file is part of the coreboot project. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +# Status Register A +# ----------------------------------------------------------------- +# Status Register B +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +388 4 h 0 reboot_counter +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +#392 3 r 0 unused +395 4 e 6 debug_level +#399 1 r 0 unused + +#400 8 r 0 reserved for century byte + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + +# coreboot config options: EC +#411 1 e 8 first_battery +#412 1 e 1 bluetooth +#413 1 e 1 wwan +#414 1 e 1 touchpad +#415 1 e 1 wlan +#416 1 e 1 trackpoint +#417 1 e 1 fn_ctrl_swap +#418 1 e 1 sticky_fn +#419 2 e 13 usb_always_on +#421 1 e 9 sata_mode +#422 2 e 10 backlight + +# coreboot config options: cpu +#424 8 r 0 unused + +# coreboot config options: northbridge +#432 5 e 11 gfx_uma_size +#437 3 r 0 unused +#440 8 h 0 volume + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 +960 16 r 0 mrc_scrambler_seed_chk + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +6 0 Emergency +6 1 Alert +6 2 Critical +6 3 Error +6 4 Warning +6 5 Notice +6 6 Info +6 7 Debug +6 8 Spew +7 0 Disable +7 1 Enable +7 2 Keep + +# ----------------------------------------------------------------- +checksums + +checksum 392 447 984 diff --git a/src/mainboard/apple/macbookpro8_1/devicetree.cb b/src/mainboard/apple/macbookpro8_1/devicetree.cb new file mode 100644 index 0000000..db21a62 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/devicetree.cb @@ -0,0 +1,113 @@ +chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.link_frequency_270_mhz" = "1" + register "gfx.ndid" = "3" + register "gfx.use_spread_spectrum_clock" = "1" + register "gpu_cpu_backlight" = "0x00001312" + register "gpu_dp_b_hotplug" = "4" + register "gpu_dp_c_hotplug" = "4" + register "gpu_dp_d_hotplug" = "4" + register "gpu_panel_port_select" = "0" + register "gpu_panel_power_backlight_off_delay" = "2000" + register "gpu_panel_power_backlight_on_delay" = "2000" + register "gpu_panel_power_cycle_delay" = "5" + register "gpu_panel_power_down_delay" = "500" + register "gpu_panel_power_up_delay" = "600" + register "gpu_pch_backlight" = "0x13121312" + + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on + end + device lapic 0xacac off + end + end + end + + register "pci_mmio_size" = "2048" + + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "0" + register "gen1_dec" = "0x000c0681" + register "gen2_dec" = "0x000c1641" + register "gen3_dec" = "0x001c0301" + register "gen4_dec" = "0x00fc0701" + register "gpi7_routing" = "2" + register "p_cnt_throttling_supported" = "1" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x3" + register "spi_lvscc" = "0x0" + register "spi_uvscc" = "0x2005" + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x8086 0x7270 + end + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on # USB2 EHCI #2 Unsupported PCI device 8086:1c2c + subsystemid 0x8086 0x7270 + end + device pci 1b.0 on # High Definition Audio Audio controller + subsystemid 0x8086 0x7270 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x8086 0x7270 + end + device pci 1c.1 on # PCIe Port #2 + subsystemid 0x8086 0x7270 + end + device pci 1c.2 on # PCIe Port #3 + subsystemid 0x8086 0x7270 + end + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on # USB2 EHCI #1 Unsupported PCI device 8086:1c27 + subsystemid 0x8086 0x7270 + end + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge PCI-LPC bridge + subsystemid 0x8086 0x7270 + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x8086 0x7270 + end + device pci 1f.3 on # SMBus + subsystemid 0x8086 0x7270 + end + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x106b 0x00db + end + device pci 01.0 off # PCIe Bridge for discrete graphics + subsystemid 0x106b 0x00db + end + device pci 02.0 on # Internal graphics VGA controller + subsystemid 0x106b 0x00db + end + device pci 01.1 on + subsystemid 0x106b 0x00db + end + device pci 1a.7 on + subsystemid 0x8086 0x7270 + end + device pci 1d.7 on + subsystemid 0x8086 0x7270 + end + end +end diff --git a/src/mainboard/apple/macbookpro8_1/dsdt.asl b/src/mainboard/apple/macbookpro8_1/dsdt.asl new file mode 100644 index 0000000..455ac17 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/dsdt.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB +#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0 + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + /* Some generic macros */ + #include "acpi/platform.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + /* global NVS and variables. */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/apple/macbookpro8_1/gpio.c b/src/mainboard/apple/macbookpro8_1/gpio.c new file mode 100644 index 0000000..d3555ef --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/gpio.c @@ -0,0 +1,231 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_OUTPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_INPUT, + .gpio29 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio16 = GPIO_LEVEL_LOW, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_LOW, + .gpio23 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio24 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio4 = GPIO_INVERT, + .gpio5 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio9 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_GPIO, + .gpio41 = GPIO_MODE_GPIO, + .gpio42 = GPIO_MODE_GPIO, + .gpio43 = GPIO_MODE_GPIO, + .gpio44 = GPIO_MODE_GPIO, + .gpio45 = GPIO_MODE_GPIO, + .gpio46 = GPIO_MODE_GPIO, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_NATIVE, + .gpio54 = GPIO_MODE_NATIVE, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_GPIO, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_INPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_OUTPUT, + .gpio39 = GPIO_DIR_OUTPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_INPUT, + .gpio42 = GPIO_DIR_INPUT, + .gpio43 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_OUTPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_OUTPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio52 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio59 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio33 = GPIO_LEVEL_LOW, + .gpio34 = GPIO_LEVEL_HIGH, + .gpio37 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_LOW, + .gpio39 = GPIO_LEVEL_LOW, + .gpio45 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_GPIO, + .gpio65 = GPIO_MODE_GPIO, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_INPUT, + .gpio65 = GPIO_DIR_INPUT, + .gpio66 = GPIO_DIR_INPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/apple/macbookpro8_1/hda_verb.c b/src/mainboard/apple/macbookpro8_1/hda_verb.c new file mode 100644 index 0000000..d6cb85e --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/hda_verb.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10134206, /* Codec Vendor / Device ID: Cirrus */ + 0x106b1c00, /* Subsystem ID */ + + 0x0000000b, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x106b1c00), + + /* NID 0x09. */ + AZALIA_PIN_CFG(0x0, 0x09, 0x012b4030), + + /* NID 0x0a. */ + AZALIA_PIN_CFG(0x0, 0x0a, 0x90100121), + + /* NID 0x0b. */ + AZALIA_PIN_CFG(0x0, 0x0b, 0x90100120), + + /* NID 0x0c. */ + AZALIA_PIN_CFG(0x0, 0x0c, 0x400000f0), + + /* NID 0x0d. */ + AZALIA_PIN_CFG(0x0, 0x0d, 0x90a00110), + + /* NID 0x0e. */ + AZALIA_PIN_CFG(0x0, 0x0e, 0x400000f0), + + /* NID 0x0f. */ + AZALIA_PIN_CFG(0x0, 0x0f, 0x400000f0), + + /* NID 0x10. */ + AZALIA_PIN_CFG(0x0, 0x10, 0x004be040), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x0, 0x12, 0x400000f0), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x0, 0x15, 0x400000f0), + 0x80862805, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + + 0x00000004, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x3, 0x80860101), + + /* NID 0x05. */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* NID 0x06. */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560010), + + /* NID 0x07. */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560010), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/apple/macbookpro8_1/mainboard.c b/src/mainboard/apple/macbookpro8_1/mainboard.c new file mode 100644 index 0000000..fe63303 --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/mainboard.c @@ -0,0 +1,39 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/acpi/ec.h> +#include <console/console.h> + +static void mainboard_init(struct device *dev) +{ + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00800000; +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, + GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/apple/macbookpro8_1/romstage.c b/src/mainboard/apple/macbookpro8_1/romstage.c new file mode 100644 index 0000000..4dffacb --- /dev/null +++ b/src/mainboard/apple/macbookpro8_1/romstage.c @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * Copyright (C) 2019 Evgeny Zinoviev <me(a)ch1p.io> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <string.h> +#include <arch/byteorder.h> +#include <device/pci_ops.h> +#include <device/pnp_ops.h> +#include <console/console.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> + +void pch_enable_lpc(void) +{ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x000c0681); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000c1641); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x001c0301); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x00fc0701); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0070); +} + +void mainboard_rcba_config(void) +{ +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[1], 0x51, id_only); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/33151 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7a7dc6d6c16751403ce276d2778dc915cd69f3f2 Gerrit-Change-Number: 33151 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.com> Gerrit-MessageType: newchange

5 46

Change in ...coreboot[master]: Mistral: Enable USB in romstage
by Name of user not set (Code Review) 16 Jan '23

16 Jan '23

nsekar(a)codeaurora.org has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32063 Change subject: Mistral: Enable USB in romstage ...................................................................... Mistral: Enable USB in romstage Enable USB support for mistral in romstage. TEST=build & run Change-Id: I5c2bbe16aa3601e014a2b77d192565402ed23794 Signed-off-by: Nitheesh Sekar <nsekar(a)codeaurora.org> --- M src/mainboard/google/mistral/Makefile.inc M src/mainboard/google/mistral/mainboard.c A src/mainboard/google/mistral/romstage.c 3 files changed, 48 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/63/32063/1 diff --git a/src/mainboard/google/mistral/Makefile.inc b/src/mainboard/google/mistral/Makefile.inc index dfb0bbc..2cb9631 100644 --- a/src/mainboard/google/mistral/Makefile.inc +++ b/src/mainboard/google/mistral/Makefile.inc @@ -11,6 +11,7 @@ romstage-y += memlayout.ld romstage-y += chromeos.c romstage-y += reset.c +romstage-y += romstage.c ramstage-y += memlayout.ld ramstage-y += chromeos.c diff --git a/src/mainboard/google/mistral/mainboard.c b/src/mainboard/google/mistral/mainboard.c index b45657f..1d62adb 100644 --- a/src/mainboard/google/mistral/mainboard.c +++ b/src/mainboard/google/mistral/mainboard.c @@ -17,6 +17,20 @@ #include <bootblock_common.h> #include <timestamp.h> #include <vendorcode/google/chromeos/chromeos.h> +#include <soc/usb.h> + +static struct usb_board_data usb1_board_data = { + .parameter_override_x0 = 0x63, + .parameter_override_x1 = 0x03, + .parameter_override_x0 = 0x1d, + .parameter_override_x1 = 0x03, +}; + +static void setup_usb(void) +{ + /* Setting Secondary usb controller */ + setup_usb_host(HSUSB_HS_PORT_1, &usb1_board_data); +} static void mainboard_init(struct device *dev) { @@ -24,6 +38,8 @@ /* Copy WIFI calibration data into CBMEM. */ cbmem_add_vpd_calibration_data(); } + + setup_usb(); } static void mainboard_enable(struct device *dev) diff --git a/src/mainboard/google/mistral/romstage.c b/src/mainboard/google/mistral/romstage.c new file mode 100644 index 0000000..41ee4ed --- /dev/null +++ b/src/mainboard/google/mistral/romstage.c @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/stages.h> +#include <soc/usb.h> + +static void prepare_usb(void) +{ + /* + * Do DWC3 core and phy reset. Kick these resets off early + * so they get atleast 1msec to settle. + */ + reset_usb(HSUSB_HS_PORT_1); +} + +void platform_romstage_main(void) +{ + prepare_usb(); +} -- To view, visit https://review.coreboot.org/c/coreboot/+/32063 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I5c2bbe16aa3601e014a2b77d192565402ed23794 Gerrit-Change-Number: 32063 Gerrit-PatchSet: 1 Gerrit-Owner: nsekar(a)codeaurora.org Gerrit-MessageType: newchange

3 4

Change in coreboot[master]: util/lint: Provide some exemption to common parts of a vendor's MB
by Karthik Ramasubramanian (Code Review) 23 Dec '22

23 Dec '22

Karthik Ramasubramanian has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37807 ) Change subject: util/lint: Provide some exemption to common parts of a vendor's MB ...................................................................... util/lint: Provide some exemption to common parts of a vendor's MB Adding common definitions for a vendor's mainboard(eg. CB:37705) requires creating dummy board_info.txt and Kconfig.name files due to lint checks. Update the lint scripts to provide exemption to common definitions for a vendor's mainboard. BUG=None TEST=Ensure that no lint errors are observed when common definitions are added for a vendor's mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub(a)google.com> Change-Id: I55c3474c17eacd008fee5f4089da33d4f7d6002a --- M util/lint/lint-stable-005-board-status M util/lint/lint-stable-006-board-name 2 files changed, 7 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/07/37807/1 diff --git a/util/lint/lint-stable-005-board-status b/util/lint/lint-stable-005-board-status index 952a9b5..e8313f2 100755 --- a/util/lint/lint-stable-005-board-status +++ b/util/lint/lint-stable-005-board-status @@ -17,6 +17,10 @@ LC_ALL=C export LC_ALL for mobodir in $(git ls-files src/mainboard | sed -n 's,^$src/mainboard/[^/]*/[^/]*$/.*$,\1,p'|sort|uniq); do + if [[ ${mobodir} =~ ^src\/mainboard\/.*\/common$ ]]; then + continue + fi + board_info="$mobodir/board_info.txt" if ! [ -f "$board_info" ]; then echo "No $board_info found" diff --git a/util/lint/lint-stable-006-board-name b/util/lint/lint-stable-006-board-name index b2418a1..cf3b0e2 100755 --- a/util/lint/lint-stable-006-board-name +++ b/util/lint/lint-stable-006-board-name @@ -29,6 +29,9 @@ done for i in src/mainboard/*/*/; do + if [[ ${i} =~ ^src\/mainboard\/.*\/common\/$ ]]; then + continue + fi if [ -r $i/Kconfig ]; then if [ ! -r $i/Kconfig.name ]; then BOARD="$(grep -A2 MAINBOARD_PART_NUMBER $i/Kconfig | tail -1 | cut -f2 -d\")" -- To view, visit https://review.coreboot.org/c/coreboot/+/37807 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I55c3474c17eacd008fee5f4089da33d4f7d6002a Gerrit-Change-Number: 37807 Gerrit-PatchSet: 1 Gerrit-Owner: Karthik Ramasubramanian <kramasub(a)google.com> Gerrit-MessageType: newchange

2 5

Change in ...coreboot[master]: SeaBIOS - unofficial patches: advanced_bootmenu and multiple_floppies
by mikeb mikeb (Code Review) 29 Nov '22

29 Nov '22

Hello Mike Banon, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/32351 to review the following change. Change subject: SeaBIOS - unofficial patches: advanced_bootmenu and multiple_floppies ...................................................................... SeaBIOS - unofficial patches: advanced_bootmenu and multiple_floppies If you'd like to add the useful floppies to your coreboot (read about them at http://dangerousprototypes.com/docs/Lenovo_G505S_hacking#Useful_floppies ), or to use your USB numpad for choosing a SeaBIOS boot entry, then this change is for you! It contains two valuable patches together with a Makefile mod needed to automatically apply these patches to a cloned SeaBIOS before its' compilation. advanced_bootmenu: up to 35 entries (2 pages if >18), numpad support (console) https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/CKWLNT… [PATCH v2] ramdisk: search for all available floppy images instead of one https://mail.coreboot.org/pipermail/seabios/2018-December/012670.html Patch descriptions are available at these links, and just in case here's a copy: advanced_bootmenu: up to 35 entries (2 pages if >18), numpad support (console) Add support for up to 35 boot menu entries (2 pages if >18). To solve the ">10" problem currently experienced by SeaBIOS users (there are no 11, 12, etc. keys on a keyboard - so impossible to choose the last menu entries if you got >10 entries because of multiple hard drives / secondary payloads / floppies) - the boot menu has been extended to the letter keys. NOTE: TPM menu has been moved from T to M letter: it is at the end of keyboard's 3rd row of letters and "Trusted" is adjective while "Module" is a noun; alternatively could press '-'. Also, add support for a numpad. Small USB numpad could be really convenient for choosing the boot entries at coreboot boards used as (maybe headless) servers. '/' char on numpad could be used to open the boot menu or to exit it. If there are >10 boot menu entries - the numpad console interface will be enabled: press one or two digit keys and then ENTER to confirm your choice, or remove a digit by pressing the '.Del' key. Also you could call TPM with '-' key at any moment, or boot with a single key press of your fullsize keyboard. [PATCH v2] ramdisk: search for all available floppy images instead of one All the floppy images available at CBFS will be found and listed in a boot menu, instead of the first found. Could be highly valuable if you are participating in a hobby OS development - would like to test multiple versions of your floppy at the same coreboot image, to reduce the amount of re-flashes and accelerate the development at bare metal - or simply you would like to access multiple floppies as a coreboot user. For example: KolibriOS (nice assembly OS with GUI and apps), FreeDOS, MichalOS, Snowdrop and memtest (coreboot's memtest version is buggy, e.g. external USB keyboard isn't working at some laptops; floppy is much better) Signed-off-by: Mike Banon <mikebdp2(a)gmail.com> Change-Id: Idf4efba31091a8678b51c2f6541d440c5cc6d37d --- M payloads/external/SeaBIOS/Makefile A payloads/external/SeaBIOS/advanced_bootmenu.patch A payloads/external/SeaBIOS/multiple_floppies.patch 3 files changed, 551 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/51/32351/1 diff --git a/payloads/external/SeaBIOS/Makefile b/payloads/external/SeaBIOS/Makefile index e505c8c..ae58c8c 100644 --- a/payloads/external/SeaBIOS/Makefile +++ b/payloads/external/SeaBIOS/Makefile @@ -76,7 +76,18 @@ # echo "# CONFIG_SMBIOS is not set" >> seabios/.config $(MAKE) -C seabios olddefconfig OUT=out/ -build: config +patch: + if [ -d seabios ]; then \ + cd seabios; \ + if [ ! -f .patched ]; then \ + echo " PATCH SeaBIOS $(TAG-y)"; \ + patch -p1 < ./../advanced_bootmenu.patch; \ + patch -p1 < ./../multiple_floppies.patch; \ + touch .patched; \ + fi; \ + fi + +build: config patch echo " MAKE SeaBIOS $(TAG-y)" $(MAKE) -C seabios OUT=out/ diff --git a/payloads/external/SeaBIOS/advanced_bootmenu.patch b/payloads/external/SeaBIOS/advanced_bootmenu.patch new file mode 100644 index 0000000..c914588 --- /dev/null +++ b/payloads/external/SeaBIOS/advanced_bootmenu.patch @@ -0,0 +1,332 @@ +diff --git a/src/boot.c b/src/boot.c +index 9f82f3c..f94dd27 100644 +--- a/src/boot.c ++++ b/src/boot.c +@@ -463,6 +463,7 @@ get_keystroke(int msec) + * Boot menu and BCV execution + ****************************************************************/ + ++#define BOOTMENU_PAGE_SIZE 18 + #define DEFAULT_BOOTMENU_WAIT 2500 + + // Show IPL option menu. +@@ -478,59 +479,282 @@ interactive_bootmenu(void) + ; + + char *bootmsg = romfile_loadfile("etc/boot-menu-message", NULL); +- int menukey = romfile_loadint("etc/boot-menu-key", 1); +- printf("%s", bootmsg ?: "\nPress ESC for boot menu.\n\n"); ++ int menukey = romfile_loadint("etc/boot-menu-key", 1); // custom menukey ++ printf("%s", bootmsg ?: "\nPress ESC or \\ / slash for boot menu.\n\n"); + free(bootmsg); + + u32 menutime = romfile_loadint("etc/boot-menu-wait", DEFAULT_BOOTMENU_WAIT); + enable_bootsplash(); + int scan_code = get_keystroke(menutime); + disable_bootsplash(); +- if (scan_code != menukey) ++ if (scan_code != menukey && // custom menukey ++ scan_code != 1 && // ESC ++ scan_code != 43 && // '\' char on keyboard ++ scan_code != 53 && // '/' char on keyboard ++ scan_code != 98) { // '/' char on numpad ++ if (scan_code == -1) ++ printf("No key pressed.\n"); ++ else ++ printf("Not a menukey pressed.\n"); + return; ++ } + + while (get_keystroke(0) >= 0) + ; + +- printf("Select boot device:\n\n"); + wait_threads(); + +- // Show menu items ++ char keyboard_keys[35] = {'1','2','3','4','5','6','7','8','9','0', ++ 'q','w','e','r','t','y','u','i','o','p', ++ 'a','s','d','f','g','h','j','k','l', ++ 'z','x','c','v','b','n'}; /* m = TPM */ ++ int numpad_scancodes[10] = { 82, 79, 80, 81, 75, 76, 77, 71, 72, 73 }; ++ int numpi = 0; // Key index: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9. ++ int digits = 0; // Numerical length of a current choice number. ++ int decode = 0; // Decode the current choice number into a letter? ++ int entry_id = 0; ++ char desc[77]; ++ ++ printf("Select boot device"); ++ ++ // Show menu items after counting them and determining a number of pages. ++ // Only 35 boot menu items (36 if to count a TPM) are supported currently. ++ + int maxmenu = 0; + struct bootentry_s *pos; +- hlist_for_each_entry(pos, &BootList, node) { +- char desc[77]; ++ hlist_for_each_entry(pos, &BootList, node) + maxmenu++; +- printf("%d. %s\n", maxmenu ++ ++ if (maxmenu > 10) { ++ if (maxmenu > 35) ++ maxmenu = 35; ++ if (maxmenu > BOOTMENU_PAGE_SIZE) ++ printf(" - page 1 :"); ++ else ++ printf(": "); ++ printf(" // press ENTER after your numpad input"); ++ if (maxmenu > BOOTMENU_PAGE_SIZE) ++ printf(" - if any -\n " ++ " // - or to switch between the pages...\n"); ++ else ++ printf(" (if any)\n\n"); ++ } else { ++ printf(":\n\n"); ++ } ++ ++ hlist_for_each_entry(pos, &BootList, node) { ++ if (entry_id == BOOTMENU_PAGE_SIZE) // Show only the first page. ++ break; ++ printf("%c. %s\n", keyboard_keys[entry_id] + , strtcpy(desc, pos->description, ARRAY_SIZE(desc))); ++ entry_id++; + } ++ int tpm_cshm = 0; + if (tpm_can_show_menu()) { +- printf("\nt. TPM Configuration\n"); ++ tpm_cshm = 1; ++ printf("\nm-. TPM Configuration"); + } +- +- // Get key press. If the menu key is ESC, do not restart boot unless +- // 1.5 seconds have passed. Otherwise users (trained by years of +- // repeatedly hitting keys to enter the BIOS) will end up hitting ESC +- // multiple times and immediately booting the primary boot device. +- int esc_accepted_time = irqtimer_calc(menukey == 1 ? 1500 : 0); ++ printf("\n> "); ++ ++ // Do not restart boot on menukey press, unless DEFAULT_BOOTMENU_WAIT msecs ++ // have passed. Otherwise users (trained by years of repeatedly hitting keys ++ // to enter the BIOS) will end up hitting menukey multiple times and ++ // immediately booting the primary boot device. ++ int esc_accepted_time = irqtimer_calc(DEFAULT_BOOTMENU_WAIT); ++ int choice = 0, kb_choice = 0; ++ int page_num = 1; ++ int enter = 0; ++ int backspace = 0; ++ int tpm_show_menu = 0; + for (;;) { + scan_code = get_keystroke(1000); +- if (scan_code == 1 && !irqtimer_check(esc_accepted_time)) +- continue; +- if (tpm_can_show_menu() && scan_code == 20 /* t */) { ++ if (scan_code == menukey || // custom menukey ++ scan_code == 1 || // ESC ++ scan_code == 43 || // '\' char on keyboard ++ scan_code == 53 || // '/' char on keyboard ++ scan_code == 98) { // '/' char on numpad ++ if (!irqtimer_check(esc_accepted_time)) ++ continue; ++ if (digits == 2) // Remove the decoded "(*)" ++ printf(" \b\b\b"); ++ /* Remove the existing input before printing a message. */ ++ for (; digits > 0; digits--) ++ printf("\b \b"); ++ printf("Menukey pressed.\n"); ++ return; ++ } ++ kb_choice = 0; ++ /* 4 rows of keyboard_keys: 1 row with numbers, 3 rows with letters. ++ Use any of them to select a boot device (except the TPM 'm-' keys) */ ++ // 1st range: 1-9 and 0 (10) keys <==> 2-11 scan codes <==> 1-10 choice ++ if (scan_code >= 2 && scan_code <= 11) kb_choice = scan_code - 1; ++ // 2nd range: Q-P row of letters <==> 16-25 scan codes <==> 11-20 choice ++ if (scan_code >= 16 && scan_code <= 25) kb_choice = scan_code - 5; ++ // 3rd range: A-L row of letters <==> 30-38 scan codes <==> 21-29 choice ++ if (scan_code >= 30 && scan_code <= 38) kb_choice = scan_code - 9; ++ // 4th range: Z-N row of letters <==> 44-49 scan codes <==> 30-35 choice ++ if (scan_code >= 44 && scan_code <= 49) kb_choice = scan_code - 14; ++ // ENTER: (28) on keyboard, (96) on numpad. ++ if (scan_code == 28 || scan_code == 96) ++ enter = 1; ++ // BCKSPC: '<-'(14) and 'Delete'(111) on keyboard, '.Del'(83) on numpad. ++ if (scan_code == 14 || scan_code == 111 || scan_code == 83) ++ backspace = 1; ++ // TPM keys: 'm'(50) and '-'(12) chars on keyboard, '-'(74) on numpad. ++ if ((scan_code == 50 || scan_code == 12 || scan_code == 74) && tpm_cshm) ++ tpm_show_menu = 1; ++ ++ if (kb_choice != 0 || tpm_show_menu) { ++ if (kb_choice > maxmenu) { ++ if (!tpm_show_menu) ++ continue; ++ } else { ++ choice = kb_choice; ++ } ++ if (digits == 2) // Remove the decoded "(*)" ++ printf(" \b\b\b"); ++ /* Remove the existing input before printing a choice. */ ++ for (; digits > 0; digits--) ++ printf("\b \b"); ++ if (!tpm_show_menu) { ++ // Choice is any of the detected boot devices ==> lets boot! ++ break; ++ } ++ } else { ++ // Internal/USB Numpad console interface. ++ if (digits < 9) { ++ for (numpi = 0; numpi < 10; numpi++) { ++ if (scan_code == numpad_scancodes[numpi]) { ++ if (maxmenu <= 10) { // Console interface is not needed. ++ if ((numpi != 0 && numpi <= maxmenu) || ++ (numpi == 0 && 10 <= maxmenu)) { // 10(0) ++ choice = numpi; ++ enter = 1; // Fake ENTER to boot this entry now. ++ } else { // If no such an entry, don't try to boot. ++ break; ++ } ++ } else { ++ if (digits == 2) { ++ printf(" \b\b\b"); // Remove the decoded "(*)" ++ if (choice == 0) { ++ printf("\b\b \b\b"); // Remove "10". ++ digits = 0; ++ } ++ } ++ choice = 10 * choice + numpi; ++ } ++ if (choice > 0) { ++ printf("%d", numpi); // Print the entered digit. ++ digits++; ++ } else { ++ if (10 <= maxmenu) ++ printf("10(0)\b\b\b"); ++ else ++ printf("10(?)\b\b\b"); ++ digits = 2; ++ } ++ if (choice > 9 && digits == 2) // Decode into a letter. ++ decode = 1; ++ break; ++ } ++ } ++ } ++ if (backspace && digits > 0) { ++ backspace = 0; ++ choice = choice / 10; ++ if (digits == 2) { ++ printf(" \b\b\b"); // Remove the decoded "(*)" ++ // 0 turned into 10: one more Backspace is needed to remove. ++ if (choice == 0) { ++ printf("\b \b"); ++ digits--; ++ } ++ } ++ printf("\b \b"); // Remove the last entered digit. ++ digits--; ++ if (choice > 9 && digits == 2) // Decode into a letter. ++ decode = 1; ++ } ++ if (decode) { // Decode the current choice number into a letter. ++ decode = 0; ++ if (choice <= maxmenu) { ++ printf("(%c)", keyboard_keys[choice-1]); ++ } else { ++ if (tpm_cshm && choice == 36) ++ printf("(m)"); // For TPM. ++ else ++ printf("(?)"); // No matching letter found. ++ } ++ printf("\b\b\b"); // Move a cursor before the "(*)" ++ } ++ } ++ ++ if (enter) { ++ enter = 0; ++ if (choice == 0) { ++ if (digits == 2) { // for 0 that turned into 10 ++ if (10 <= maxmenu) ++ break; ++ else ++ continue; ++ } ++ // If there are two pages - switch between them. ++ if (maxmenu > BOOTMENU_PAGE_SIZE) { ++ entry_id = 0; ++ page_num = 3 - page_num; // 3 - 1 = 2; 3 - 2 = 1. ++ printf("\n\nSelect boot device - page %d :" ++ " // press ENTER after your numpad input" ++ " - if any -\n " ++ " // - or to switch between the pages...\n", ++ page_num); ++ hlist_for_each_entry(pos, &BootList, node) { ++ if ((page_num == 1 && entry_id == BOOTMENU_PAGE_SIZE) || ++ (page_num == 2 && entry_id == 35)) ++ break; ++ if (page_num == 1 || entry_id >= BOOTMENU_PAGE_SIZE) ++ printf("%c. %s\n", keyboard_keys[entry_id], ++ strtcpy(desc, pos->description, ARRAY_SIZE(desc))); ++ entry_id++; ++ } ++ if (tpm_cshm) ++ printf("\nm-. TPM Configuration"); ++ printf("\n> "); ++ } ++ } else { ++ if (choice > maxmenu) { ++ if (tpm_cshm && choice == 36) ++ tpm_show_menu = 1; ++ } else { ++ // Choice is any of the detected boot devices ==> lets boot! ++ break; ++ } ++ } ++ } ++ ++ if (tpm_show_menu) { ++ tpm_show_menu = 0; ++ choice = 0; ++ if (digits == 0) ++ printf("TPM key pressed."); ++ else ++ digits = 0; + printf("\n"); + tpm_menu(); ++ printf("> "); + } +- if (scan_code >= 1 && scan_code <= maxmenu+1) +- break; ++ } ++ ++ if (choice == 0) // 10(0) ++ choice = 10; ++ ++ if (digits == 0 && choice < 36) { ++ printf("%c", keyboard_keys[choice-1]); ++ if (choice > 9) // Decode into a number. ++ printf("(%d)", choice); + } + printf("\n"); +- if (scan_code == 0x01) +- // ESC +- return; + + // Find entry and make top priority. +- int choice = scan_code - 1; + hlist_for_each_entry(pos, &BootList, node) { + if (! --choice) + break; +diff --git a/src/config.h b/src/config.h +index 93c8dbc..f85cc14 100644 +--- a/src/config.h ++++ b/src/config.h +@@ -19,7 +19,7 @@ + // Space to reserve in high-memory for tables + #define BUILD_MAX_HIGHTABLE (256*1024) + // Largest supported externaly facing drive id +-#define BUILD_MAX_EXTDRIVE 16 ++#define BUILD_MAX_EXTDRIVE 36 + // Number of bytes the smbios may be and still live in the f-segment + #define BUILD_MAX_SMBIOS_FSEG 600 + // Maximum number of bytes the mptable may be and still be copied to f-segment diff --git a/payloads/external/SeaBIOS/multiple_floppies.patch b/payloads/external/SeaBIOS/multiple_floppies.patch new file mode 100644 index 0000000..5249394 --- /dev/null +++ b/payloads/external/SeaBIOS/multiple_floppies.patch @@ -0,0 +1,207 @@ +diff --git a/src/block.h b/src/block.h +index f64e880..aaa236f 100644 +--- a/src/block.h ++++ b/src/block.h +@@ -2,7 +2,7 @@ + #define __BLOCK_H + + #include "types.h" // u32 +- ++#include "romfile.h" // struct romfile_s + + /**************************************************************** + * Disk command request +@@ -48,6 +48,7 @@ struct drive_s { + struct drive_s { + u8 type; // Driver type (DTYPE_*) + u8 floppy_type; // Type of floppy (only for floppy drives). ++ struct romfile_s *floppy_file; // Floppy file (only for virtual floppies). + struct chs_s lchs; // Logical CHS + u64 sectors; // Total sectors count + u32 cntl_id; // Unique id for a given driver type. +diff --git a/src/boot.c b/src/boot.c +index 9f82f3c..79f1e7d 100644 +--- a/src/boot.c ++++ b/src/boot.c +@@ -584,7 +584,7 @@ bcv_prepboot(void) + break; + case IPL_TYPE_FLOPPY: + map_floppy_drive(pos->drive); +- add_bev(IPL_TYPE_FLOPPY, 0); ++ add_bev(IPL_TYPE_FLOPPY, (u32)pos->drive); + break; + case IPL_TYPE_HARDDISK: + map_hd_drive(pos->drive); +@@ -733,6 +733,12 @@ do_boot(int seq_nr) + static void + do_boot(int seq_nr) + { ++ ++ int ret; ++ void *pos; ++ struct romfile_s *file; ++ struct drive_s *drive; ++ + if (! CONFIG_BOOT) + panic("Boot support not compiled in.\n"); + +@@ -744,6 +750,16 @@ do_boot(int seq_nr) + switch (ie->type) { + case IPL_TYPE_FLOPPY: + printf("Booting from Floppy...\n"); ++ drive = (struct drive_s *)ie->vector; ++ file = drive->floppy_file; ++ // File is NULL if a floppy is physical. ++ if (file) { ++ // Copy virtual floppy image into ram. ++ pos = (void *)drive->cntl_id; ++ ret = file->copy(file, pos, file->size); ++ if (ret < 0) ++ break; ++ } + boot_disk(0x00, CheckFloppySig); + break; + case IPL_TYPE_HARDDISK: +diff --git a/src/hw/floppy.c b/src/hw/floppy.c +index 9e6647d..5b37c6c 100644 +--- a/src/hw/floppy.c ++++ b/src/hw/floppy.c +@@ -107,7 +107,7 @@ struct floppyinfo_s FloppyInfo[] VARFSEG = { + }; + + struct drive_s * +-init_floppy(int floppyid, int ftype) ++init_floppy(int floppyid, int ftype, struct romfile_s *ffile) + { + if (ftype <= 0 || ftype >= ARRAY_SIZE(FloppyInfo)) { + dprintf(1, "Bad floppy type %d\n", ftype); +@@ -124,6 +124,7 @@ init_floppy(int floppyid, int ftype) + drive->type = DTYPE_FLOPPY; + drive->blksize = DISK_SECTOR_SIZE; + drive->floppy_type = ftype; ++ drive->floppy_file = ffile; + drive->sectors = (u64)-1; + + memcpy(&drive->lchs, &FloppyInfo[ftype].chs +@@ -134,7 +135,7 @@ addFloppy(int floppyid, int ftype) + static void + addFloppy(int floppyid, int ftype) + { +- struct drive_s *drive = init_floppy(floppyid, ftype); ++ struct drive_s *drive = init_floppy(floppyid, ftype, 0); + if (!drive) + return; + char *desc = znprintf(MAXDESCSIZE, "Floppy [drive %c]", 'A' + floppyid); +diff --git a/src/hw/ramdisk.c b/src/hw/ramdisk.c +index b9e9baa..a679385 100644 +--- a/src/hw/ramdisk.c ++++ b/src/hw/ramdisk.c +@@ -23,40 +23,69 @@ ramdisk_setup(void) + if (!CONFIG_FLASH_FLOPPY) + return; + +- // Find image. +- struct romfile_s *file = romfile_findprefix("floppyimg/", NULL); +- if (!file) +- return; +- const char *filename = file->name; +- u32 size = file->size; +- dprintf(3, "Found floppy file %s of size %d\n", filename, size); +- int ftype = find_floppy_type(size); +- if (ftype < 0) { +- dprintf(3, "No floppy type found for ramdisk size\n"); ++ struct romfile_s *file = NULL; ++ char *filename, *desc; ++ u32 size, max_size = 0; ++ int ftype; ++ void *pos; ++ struct drive_s *drive; ++ ++ // Find the max floppy size ++ for (;;) { ++ // Find the next image. ++ file = romfile_findprefix("floppyimg/", file); ++ if (!file) ++ break; ++ filename = file->name; ++ size = file->size; ++ dprintf(3, "Found floppy file %s of size %d\n", filename, size); ++ // Check if this size is valid. ++ ftype = find_floppy_type(size); ++ if (ftype < 0) { ++ dprintf(3, "No floppy type found for ramdisk size\n"); ++ } else { ++ if (size > max_size) ++ max_size = size; ++ } ++ } ++ if (max_size == 0) { ++ dprintf(3, "No floppies found\n"); + return; + } + + // Allocate ram for image. +- void *pos = memalign_tmphigh(PAGE_SIZE, size); ++ pos = memalign_tmphigh(PAGE_SIZE, max_size); + if (!pos) { + warn_noalloc(); + return; + } +- e820_add((u32)pos, size, E820_RESERVED); ++ e820_add((u32)pos, max_size, E820_RESERVED); ++ dprintf(3, "Allocate %u bytes for a floppy\n", max_size); + +- // Copy image into ram. +- int ret = file->copy(file, pos, size); +- if (ret < 0) +- return; +- +- // Setup driver. +- struct drive_s *drive = init_floppy((u32)pos, ftype); +- if (!drive) +- return; +- drive->type = DTYPE_RAMDISK; +- dprintf(1, "Mapping floppy %s to addr %p\n", filename, pos); +- char *desc = znprintf(MAXDESCSIZE, "Ramdisk [%s]", &filename[10]); +- boot_add_floppy(drive, desc, bootprio_find_named_rom(filename, 0)); ++ // Setup the floppy drivers. ++ file = NULL; ++ for (;;) { ++ // Find the next image. ++ file = romfile_findprefix("floppyimg/", file); ++ if (!file) ++ return; ++ filename = file->name; ++ size = file->size; ++ dprintf(3, "Found floppy file %s of size %d\n", filename, size); ++ ftype = find_floppy_type(size); ++ if (ftype < 0) { ++ dprintf(3, "No floppy type found for ramdisk size\n"); ++ } else { ++ // Setup driver. ++ drive = init_floppy((u32)pos, ftype, file); ++ if (!drive) ++ return; ++ drive->type = DTYPE_RAMDISK; ++ dprintf(1, "Mapping floppy %s to addr %p\n", filename, pos); ++ desc = znprintf(MAXDESCSIZE, "Ramdisk [%s]", &filename[10]); ++ boot_add_floppy(drive, desc, bootprio_find_named_rom(filename, 0)); ++ } ++ } + } + + static int +diff --git a/src/util.h b/src/util.h +index 9c06850..ce3a26d 100644 +--- a/src/util.h ++++ b/src/util.h +@@ -147,7 +147,8 @@ void dma_setup(void); + // hw/floppy.c + extern struct floppy_ext_dbt_s diskette_param_table2; + void floppy_setup(void); +-struct drive_s *init_floppy(int floppyid, int ftype); ++extern struct romfile_s *ffile; ++struct drive_s *init_floppy(int floppyid, int ftype, struct romfile_s *ffile); + int find_floppy_type(u32 size); + int floppy_process_op(struct disk_op_s *op); + void floppy_tick(void); -- To view, visit https://review.coreboot.org/c/coreboot/+/32351 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Idf4efba31091a8678b51c2f6541d440c5cc6d37d Gerrit-Change-Number: 32351 Gerrit-PatchSet: 1 Gerrit-Owner: mikeb mikeb <mikebdp2(a)gmail.com> Gerrit-Reviewer: Mike Banon <mikebdp2(a)gmail.com> Gerrit-MessageType: newchange

5 31

Change in ...coreboot[master]: soc/intel/common/block/pcr: Remove unneded 'esle'
by HAOUAS Elyes (Code Review) 14 Nov '22

14 Nov '22

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33336 Change subject: soc/intel/common/block/pcr: Remove unneded 'esle' ...................................................................... soc/intel/common/block/pcr: Remove unneded 'esle' 'else' is not needed after a 'break' or 'return'. Change-Id: Ib3371ef6edb85a47ed734dd2ff9ce94008aa4e65 Signed-off-by: Elyes HAOUAS <ehaouas(a)noos.fr> --- M src/soc/intel/common/block/pcr/pcr.c 1 file changed, 3 insertions(+), 4 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/36/33336/1 diff --git a/src/soc/intel/common/block/pcr/pcr.c b/src/soc/intel/common/block/pcr/pcr.c index 4a35a03..f3971c2 100644 --- a/src/soc/intel/common/block/pcr/pcr.c +++ b/src/soc/intel/common/block/pcr/pcr.c @@ -394,10 +394,9 @@ break; } return 0; - } else { - printk(BIOS_ERR, "SBI Failure: Transaction Status = %x\n", - *response); - return -1; } + printk(BIOS_ERR, "SBI Failure: Transaction Status = %x\n", + *response); + return -1; } #endif -- To view, visit https://review.coreboot.org/c/coreboot/+/33336 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ib3371ef6edb85a47ed734dd2ff9ce94008aa4e65 Gerrit-Change-Number: 33336 Gerrit-PatchSet: 1 Gerrit-Owner: HAOUAS Elyes <ehaouas(a)noos.fr> Gerrit-MessageType: newchange

5 6

Change in ...coreboot[master]: src/Kconfig: Move DRAM section to 'Devices' menu
by HAOUAS Elyes (Code Review) 14 Nov '22

14 Nov '22

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32882 Change subject: src/Kconfig: Move DRAM section to 'Devices' menu ...................................................................... src/Kconfig: Move DRAM section to 'Devices' menu This moves DRAM to 'Devices' menu and allow to change default DIMM_MAX value if needed. Change-Id: I7aa5436c6ff5fef53fde2081e902d793f3581c1e Signed-off-by: Elyes HAOUAS <ehaouas(a)noos.fr> --- M src/Kconfig M src/device/Kconfig 2 files changed, 24 insertions(+), 25 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/82/32882/1 diff --git a/src/Kconfig b/src/Kconfig index 2c9dc4a..d30aa99 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -1158,31 +1158,6 @@ implies configurability usually found on SoCs, particularly the ability to control internal pull resistors. -config GENERIC_SPD_BIN - bool - help - If enabled, add support for adding spd.hex files in cbfs as spd.bin - and locating it runtime to load SPD. Additionally provide provision to - fetch SPD over SMBus. - -config DIMM_MAX - int - default 4 - help - Total number of memory DIMM slots available on motherboard. - It is multiplication of number of channel to number of DIMMs per - channel - -config DIMM_SPD_SIZE - int - default 256 - help - Total SPD size that will be used for DIMM. - Ex: DDR3 256, DDR4 512. - -config SPD_READ_BY_WORD - bool - config BOOTBLOCK_CUSTOM # To be selected by arch, SoC or mainboard if it does not want use the normal # src/lib/bootblock.c#main() C entry point. diff --git a/src/device/Kconfig b/src/device/Kconfig index 0539062..d4cacec 100644 --- a/src/device/Kconfig +++ b/src/device/Kconfig @@ -681,5 +681,29 @@ be useful for debugging or on platforms where a driver for the real I2C controller is not (yet) available. The platform code needs to provide bindings to manually toggle I2C lines. +config GENERIC_SPD_BIN + bool + help + If enabled, add support for adding spd.hex files in cbfs as spd.bin + and locating it runtime to load SPD. Additionally provide provision to + fetch SPD over SMBus. + +config DIMM_MAX + int "Total number of memory DIMM slots" + default 4 + help + Total number of memory DIMM slots available on motherboard. + It is multiplication of number of channel to number of DIMMs per + channel + +config DIMM_SPD_SIZE + int + default 256 + help + Total SPD size that will be used for DIMM. + Ex: DDR3 256, DDR4 512. + +config SPD_READ_BY_WORD + bool endmenu -- To view, visit https://review.coreboot.org/c/coreboot/+/32882 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7aa5436c6ff5fef53fde2081e902d793f3581c1e Gerrit-Change-Number: 32882 Gerrit-PatchSet: 1 Gerrit-Owner: HAOUAS Elyes <ehaouas(a)noos.fr> Gerrit-MessageType: newchange

5 8

Change in coreboot[master]: mb/supermicro/x11: fix cmos layout and add a default config
by Michael Niewöhner (Code Review) 13 Nov '22

13 Nov '22

Michael Niewöhner has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35526 ) Change subject: mb/supermicro/x11: fix cmos layout and add a default config ...................................................................... mb/supermicro/x11: fix cmos layout and add a default config This fixes the error that power_on_after_fail could not be found, adds the missing nmi option and adds a default config. Change-Id: I10b0aa71fa7916b01e93e16cbd81e427fd14f6a4 Signed-off-by: Michael Niewöhner <foss(a)mniewoehner.de> --- M src/mainboard/supermicro/x11-lga1151-series/Kconfig A src/mainboard/supermicro/x11-lga1151-series/cmos.default M src/mainboard/supermicro/x11-lga1151-series/cmos.layout 3 files changed, 9 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/26/35526/1 diff --git a/src/mainboard/supermicro/x11-lga1151-series/Kconfig b/src/mainboard/supermicro/x11-lga1151-series/Kconfig index 3aaf1d3..68a3c94 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/Kconfig +++ b/src/mainboard/supermicro/x11-lga1151-series/Kconfig @@ -4,6 +4,7 @@ select HAVE_ACPI_RESUME select HAVE_ACPI_TABLES select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT select SOC_INTEL_KABYLAKE select SKYLAKE_SOC_PCH_H select MAINBOARD_HAS_LPC_TPM diff --git a/src/mainboard/supermicro/x11-lga1151-series/cmos.default b/src/mainboard/supermicro/x11-lga1151-series/cmos.default new file mode 100644 index 0000000..45a860b --- /dev/null +++ b/src/mainboard/supermicro/x11-lga1151-series/cmos.default @@ -0,0 +1,4 @@ +boot_option=Fallback +debug_level=Debug +power_on_after_fail=Enable +nmi=Enable diff --git a/src/mainboard/supermicro/x11-lga1151-series/cmos.layout b/src/mainboard/supermicro/x11-lga1151-series/cmos.layout index 201ca33..e1c6aed 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/cmos.layout +++ b/src/mainboard/supermicro/x11-lga1151-series/cmos.layout @@ -30,6 +30,10 @@ 395 4 e 6 debug_level 448 128 r 0 vbnv +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + # coreboot config options: check sums 984 16 h 0 check_sum -- To view, visit https://review.coreboot.org/c/coreboot/+/35526 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I10b0aa71fa7916b01e93e16cbd81e427fd14f6a4 Gerrit-Change-Number: 35526 Gerrit-PatchSet: 1 Gerrit-Owner: Michael Niewöhner Gerrit-MessageType: newchange

6 25

Change in coreboot[master]: cpu/x86/Kconfig: Enable LAPIC remap mitigation on likely affect NB
by Arthur Heymans (Code Review) 26 Oct '22

26 Oct '22

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37321 ) Change subject: cpu/x86/Kconfig: Enable LAPIC remap mitigation on likely affect NB ...................................................................... cpu/x86/Kconfig: Enable LAPIC remap mitigation on likely affect NB Pre-sandy bridge hardware is likely affected by the sinkhole vulnerability. Change-Id: I52cb20e0edac62475597b31696f38d0ffc6080de Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/cpu/x86/Kconfig 1 file changed, 3 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/21/37321/1 diff --git a/src/cpu/x86/Kconfig b/src/cpu/x86/Kconfig index efb5fa9..335463d 100644 --- a/src/cpu/x86/Kconfig +++ b/src/cpu/x86/Kconfig @@ -139,9 +139,9 @@ config SMM_LAPIC_REMAP_MITIGATION bool - default y if NORTHBRIDGE_INTEL_I945 - default y if NORTHBRIDGE_INTEL_GM45 - default y if NORTHBRIDGE_INTEL_NEHALEM + default y if NORTHBRIDGE_INTEL_I945 || NORTHBRIDGE_INTEL_GM45 \ + || NORTHBRIDGE_INTEL_X4X || NORTHBRIDGE_INTEL_PINEVIEW \ + || NORTHBRIDGE_INTEL_E7505 default n config SERIALIZED_SMM_INITIALIZATION -- To view, visit https://review.coreboot.org/c/coreboot/+/37321 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I52cb20e0edac62475597b31696f38d0ffc6080de Gerrit-Change-Number: 37321 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

5 12

Change in coreboot[master]: Kconfig: Allow x86 to compress pre-ram stages if not run XIP
by Arthur Heymans (Code Review) 20 Sep '22

20 Sep '22

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36613 ) Change subject: Kconfig: Allow x86 to compress pre-ram stages if not run XIP ...................................................................... Kconfig: Allow x86 to compress pre-ram stages if not run XIP Change-Id: Iac24d243c4bd4cb8c1db14a8e9fc43f508c2cd5d Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/Kconfig M src/arch/x86/Makefile.inc 2 files changed, 3 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/13/36613/1 diff --git a/src/Kconfig b/src/Kconfig index 793927a..df86246 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -160,7 +160,7 @@ config COMPRESS_PRERAM_STAGES bool "Compress romstage and verstage with LZ4" - depends on !ARCH_X86 && (HAVE_ROMSTAGE || HAVE_VERSTAGE) + depends on HAVE_ROMSTAGE || HAVE_VERSTAGE # Default value set at the end of the file help Compress romstage and (if it exists) verstage with LZ4 to save flash @@ -1217,7 +1217,7 @@ default y if !UNCOMPRESSED_RAMSTAGE config COMPRESS_PRERAM_STAGES - depends on !ARCH_X86 + depends on NO_XIP_EARLY_STAGES default y config INCLUDE_CONFIG_FILE diff --git a/src/arch/x86/Makefile.inc b/src/arch/x86/Makefile.inc index 447fd57..db4f054 100644 --- a/src/arch/x86/Makefile.inc +++ b/src/arch/x86/Makefile.inc @@ -119,6 +119,7 @@ ifeq ($(CONFIG_C_ENVIRONMENT_BOOTBLOCK),y) bootblock-y += bootblock_crt0.S +bootblock-y += memmove.c ifeq ($(CONFIG_ARCH_BOOTBLOCK_X86_32),y) $(eval $(call early_x86_stage,bootblock,elf32-i386)) -- To view, visit https://review.coreboot.org/c/coreboot/+/36613 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Iac24d243c4bd4cb8c1db14a8e9fc43f508c2cd5d Gerrit-Change-Number: 36613 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

8 21

Change in ...coreboot[master]: mb/lenovo/*/romstage: Use common hybrid_graphics_init
by Peter Lemenkov (Code Review) 01 Jun '22

01 Jun '22

Peter Lemenkov has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33807 Change subject: mb/lenovo/*/romstage: Use common hybrid_graphics_init ...................................................................... mb/lenovo/*/romstage: Use common hybrid_graphics_init Change-Id: I28c3c5c94ce6c6b3fb44c2540a6fa7953a28b761 Signed-off-by: Peter Lemenkov <lemenkov(a)gmail.com> --- M src/drivers/lenovo/hybrid_graphics/hybrid_graphics.h M src/drivers/lenovo/hybrid_graphics/romstage.c M src/mainboard/lenovo/t420/romstage.c M src/mainboard/lenovo/t420s/romstage.c M src/mainboard/lenovo/t430/romstage.c M src/mainboard/lenovo/t520/romstage.c M src/mainboard/lenovo/t530/romstage.c 7 files changed, 30 insertions(+), 130 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/07/33807/1 diff --git a/src/drivers/lenovo/hybrid_graphics/hybrid_graphics.h b/src/drivers/lenovo/hybrid_graphics/hybrid_graphics.h index b238440..2f7cce6 100644 --- a/src/drivers/lenovo/hybrid_graphics/hybrid_graphics.h +++ b/src/drivers/lenovo/hybrid_graphics/hybrid_graphics.h @@ -17,5 +17,6 @@ #define _DRIVERS_LENOVO_HYBRID_GRAPHICS_H_ void early_hybrid_graphics(bool *enable_igd, bool *enable_peg); +void hybrid_graphics_init(void); #endif /* _DRIVERS_LENOVO_HYBRID_GRAPHICS_CHIP_H_ */ diff --git a/src/drivers/lenovo/hybrid_graphics/romstage.c b/src/drivers/lenovo/hybrid_graphics/romstage.c index 35cb384..e4b27bb 100644 --- a/src/drivers/lenovo/hybrid_graphics/romstage.c +++ b/src/drivers/lenovo/hybrid_graphics/romstage.c @@ -24,6 +24,9 @@ #include "hybrid_graphics.h" #include "chip.h" +#include <device/pci_ops.h> +#include <northbridge/intel/sandybridge/sandybridge.h> + /* * Returns the hybrid graphics presence and user's card preferences. */ @@ -94,3 +97,29 @@ " FIXME: dGPU power handling not implemented\n"); } } + +void hybrid_graphics_init(void) +{ + bool peg, igd; + u32 reg32; + + early_hybrid_graphics(&igd, &peg); + + if (peg && igd) + return; + + /* Hide disabled devices */ + reg32 = pci_read_config32(PCI_DEV(0, 0, 0), DEVEN); + reg32 &= ~(DEVEN_PEG10 | DEVEN_IGD); + + if (peg) + reg32 |= DEVEN_PEG10; + + if (igd) + reg32 |= DEVEN_IGD; + else + /* Disable IGD VGA decode, no GTT or GFX stolen */ + pci_write_config16(PCI_DEV(0, 0, 0), GGC, 2); + + pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, reg32); +} diff --git a/src/mainboard/lenovo/t420/romstage.c b/src/mainboard/lenovo/t420/romstage.c index ebf5aed..2f7ceb4 100644 --- a/src/mainboard/lenovo/t420/romstage.c +++ b/src/mainboard/lenovo/t420/romstage.c @@ -23,32 +23,6 @@ #include <device/device.h> #include <device/pci.h> -static void hybrid_graphics_init(void) -{ - bool peg, igd; - u32 reg32; - - early_hybrid_graphics(&igd, &peg); - - if (peg && igd) - return; - - /* Hide disabled devices */ - reg32 = pci_read_config32(PCI_DEV(0, 0, 0), DEVEN); - reg32 &= ~(DEVEN_PEG10 | DEVEN_IGD); - - if (peg) - reg32 |= DEVEN_PEG10; - - if (igd) - reg32 |= DEVEN_IGD; - else - /* Disable IGD VGA decode, no GTT or GFX stolen */ - pci_write_config16(PCI_DEV(0, 0, 0), GGC, 2); - - pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, reg32); -} - void pch_enable_lpc(void) { /* EC Decode Range Port60/64, Port62/66 */ diff --git a/src/mainboard/lenovo/t420s/romstage.c b/src/mainboard/lenovo/t420s/romstage.c index 49de58d..2eed168 100644 --- a/src/mainboard/lenovo/t420s/romstage.c +++ b/src/mainboard/lenovo/t420s/romstage.c @@ -23,32 +23,6 @@ #include <device/device.h> #include <device/pci.h> -static void hybrid_graphics_init(void) -{ - bool peg, igd; - u32 reg32; - - early_hybrid_graphics(&igd, &peg); - - if (peg && igd) - return; - - /* Hide disabled devices */ - reg32 = pci_read_config32(PCI_DEV(0, 0, 0), DEVEN); - reg32 &= ~(DEVEN_PEG10 | DEVEN_IGD); - - if (peg) - reg32 |= DEVEN_PEG10; - - if (igd) - reg32 |= DEVEN_IGD; - else - /* Disable IGD VGA decode, no GTT or GFX stolen */ - pci_write_config16(PCI_DEV(0, 0, 0), GGC, 2); - - pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, reg32); -} - void pch_enable_lpc(void) { /* EC Decode Range Port60/64, Port62/66 */ diff --git a/src/mainboard/lenovo/t430/romstage.c b/src/mainboard/lenovo/t430/romstage.c index 1f4b90d..98ff418 100644 --- a/src/mainboard/lenovo/t430/romstage.c +++ b/src/mainboard/lenovo/t430/romstage.c @@ -23,32 +23,6 @@ #include <device/device.h> #include <device/pci.h> -static void hybrid_graphics_init(void) -{ - bool peg, igd; - u32 reg32; - - early_hybrid_graphics(&igd, &peg); - - if (peg && igd) - return; - - /* Hide disabled devices */ - reg32 = pci_read_config32(PCI_DEV(0, 0, 0), DEVEN); - reg32 &= ~(DEVEN_PEG10 | DEVEN_IGD); - - if (peg) - reg32 |= DEVEN_PEG10; - - if (igd) - reg32 |= DEVEN_IGD; - else - /* Disable IGD VGA decode, no GTT or GFX stolen */ - pci_write_config16(PCI_DEV(0, 0, 0), GGC, 2); - - pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, reg32); -} - void pch_enable_lpc(void) { /* EC Decode Range Port60/64, Port62/66 */ diff --git a/src/mainboard/lenovo/t520/romstage.c b/src/mainboard/lenovo/t520/romstage.c index 5c23b8e..c23b896 100644 --- a/src/mainboard/lenovo/t520/romstage.c +++ b/src/mainboard/lenovo/t520/romstage.c @@ -25,32 +25,6 @@ #include <device/device.h> #include <device/pci.h> -static void hybrid_graphics_init(void) -{ - bool peg, igd; - u32 reg32; - - early_hybrid_graphics(&igd, &peg); - - if (peg && igd) - return; - - /* Hide disabled devices */ - reg32 = pci_read_config32(PCI_DEV(0, 0, 0), DEVEN); - reg32 &= ~(DEVEN_PEG10 | DEVEN_IGD); - - if (peg) - reg32 |= DEVEN_PEG10; - - if (igd) - reg32 |= DEVEN_IGD; - else - /* Disable IGD VGA decode, no GTT or GFX stolen */ - pci_write_config16(PCI_DEV(0, 0, 0), GGC, 2); - - pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, reg32); -} - void pch_enable_lpc(void) { /* EC Decode Range Port60/64, Port62/66 */ diff --git a/src/mainboard/lenovo/t530/romstage.c b/src/mainboard/lenovo/t530/romstage.c index 67cf97c..1b76def 100644 --- a/src/mainboard/lenovo/t530/romstage.c +++ b/src/mainboard/lenovo/t530/romstage.c @@ -25,32 +25,6 @@ #include <device/device.h> #include <device/pci.h> -static void hybrid_graphics_init(void) -{ - bool peg, igd; - u32 reg32; - - early_hybrid_graphics(&igd, &peg); - - if (peg && igd) - return; - - /* Hide disabled devices */ - reg32 = pci_read_config32(PCI_DEV(0, 0, 0), DEVEN); - reg32 &= ~(DEVEN_PEG10 | DEVEN_IGD); - - if (peg) - reg32 |= DEVEN_PEG10; - - if (igd) - reg32 |= DEVEN_IGD; - else - /* Disable IGD VGA decode, no GTT or GFX stolen */ - pci_write_config16(PCI_DEV(0, 0, 0), GGC, 2); - - pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, reg32); -} - void pch_enable_lpc(void) { /* EC Decode Range Port60/64, Port62/66 */ -- To view, visit https://review.coreboot.org/c/coreboot/+/33807 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I28c3c5c94ce6c6b3fb44c2540a6fa7953a28b761 Gerrit-Change-Number: 33807 Gerrit-PatchSet: 1 Gerrit-Owner: Peter Lemenkov <lemenkov(a)gmail.com> Gerrit-MessageType: newchange

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit February 2020