coreboot-gerrit February 2020

coreboot-gerrit@coreboot.org

1 participants
1797 discussions

Change in ...coreboot[master]: soc/intel/{skylake,cannonlake,icelake}: Correct GPIO IRQ start map
by Aamir Bohra (Code Review) 10 Jun '23

10 Jun '23

Aamir Bohra has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31245 Change subject: soc/intel/{skylake,cannonlake,icelake}: Correct GPIO IRQ start map ...................................................................... soc/intel/{skylake,cannonlake,icelake}: Correct GPIO IRQ start map This implementation corrects the GPIO IRQ start map used for ITSS polarity configuration. The lowest GPIO IRQ mapped in SKL/KBL, CNL, and ICL is 24. BUG=b:123315212 TEST=[TESTED on CNL-ONLY] Verify the ITSS polarity configuration for GPIOs are correctly getting restored to original coreboot configuration, after fsp-s call in itss_restore_irq_polarities() call. Change-Id: I3c12e6ca01453da92259f077771c3f4d887aa03d Signed-off-by: Aamir Bohra <aamir.bohra(a)intel.com> --- M src/soc/intel/cannonlake/include/soc/itss.h M src/soc/intel/icelake/include/soc/itss.h M src/soc/intel/skylake/include/soc/itss.h 3 files changed, 3 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/45/31245/1 diff --git a/src/soc/intel/cannonlake/include/soc/itss.h b/src/soc/intel/cannonlake/include/soc/itss.h index 0d8b2ca..09245e7 100644 --- a/src/soc/intel/cannonlake/include/soc/itss.h +++ b/src/soc/intel/cannonlake/include/soc/itss.h @@ -16,7 +16,7 @@ #ifndef SOC_INTEL_CNL_ITSS_H #define SOC_INTEL_CNL_ITSS_H -#define GPIO_IRQ_START 50 +#define GPIO_IRQ_START 24 #define GPIO_IRQ_END ITSS_MAX_IRQ #define ITSS_MAX_IRQ 119 diff --git a/src/soc/intel/icelake/include/soc/itss.h b/src/soc/intel/icelake/include/soc/itss.h index d846ce0..c27a2ea 100644 --- a/src/soc/intel/icelake/include/soc/itss.h +++ b/src/soc/intel/icelake/include/soc/itss.h @@ -16,7 +16,7 @@ #ifndef SOC_INTEL_ICL_ITSS_H #define SOC_INTEL_ICL_ITSS_H -#define GPIO_IRQ_START 50 +#define GPIO_IRQ_START 24 #define GPIO_IRQ_END ITSS_MAX_IRQ #define ITSS_MAX_IRQ 119 diff --git a/src/soc/intel/skylake/include/soc/itss.h b/src/soc/intel/skylake/include/soc/itss.h index e6eb8b0..a987cab 100644 --- a/src/soc/intel/skylake/include/soc/itss.h +++ b/src/soc/intel/skylake/include/soc/itss.h @@ -16,7 +16,7 @@ #ifndef SOC_INTEL_SKL_ITSS_H #define SOC_INTEL_SKL_ITSS_H -#define GPIO_IRQ_START 50 +#define GPIO_IRQ_START 24 #define GPIO_IRQ_END ITSS_MAX_IRQ #define ITSS_MAX_IRQ 119 -- To view, visit https://review.coreboot.org/c/coreboot/+/31245 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3c12e6ca01453da92259f077771c3f4d887aa03d Gerrit-Change-Number: 31245 Gerrit-PatchSet: 1 Gerrit-Owner: Aamir Bohra <aamir.bohra(a)intel.com> Gerrit-MessageType: newchange

6 8

Change in ...coreboot[master]: mb/intel/icelake_rvp: Configure USBC display HPD GPIOs
by Aamir Bohra (Code Review) 10 Jun '23

10 Jun '23

Aamir Bohra has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31362 Change subject: mb/intel/icelake_rvp: Configure USBC display HPD GPIOs ...................................................................... mb/intel/icelake_rvp: Configure USBC display HPD GPIOs Change-Id: Ic76a6ac88de41b8cb5ff5c724e8ff9b9d7996a61 Signed-off-by: Aamir Bohra <aamir.bohra(a)intel.com> --- M src/mainboard/intel/icelake_rvp/variants/icl_u/gpio.c M src/mainboard/intel/icelake_rvp/variants/icl_y/gpio.c 2 files changed, 16 insertions(+), 4 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/62/31362/1 diff --git a/src/mainboard/intel/icelake_rvp/variants/icl_u/gpio.c b/src/mainboard/intel/icelake_rvp/variants/icl_u/gpio.c index ea96cbc..9076b93 100644 --- a/src/mainboard/intel/icelake_rvp/variants/icl_u/gpio.c +++ b/src/mainboard/intel/icelake_rvp/variants/icl_u/gpio.c @@ -25,8 +25,14 @@ PAD_CFG_GPI(GPP_A10, NONE, PLTRST), /* TCH_PNL2_RST_N */ PAD_CFG_GPO(GPP_A13, 1, DEEP), -/* ONBOARD_X4_PCIE_SLOT1_PWREN_N */ -PAD_CFG_GPO(GPP_A14, 0, DEEP), +/* USB_C2_HPD */ +PAD_CFG_NF(GPP_A14, NONE, DEEP, NF2), +/* USB_C3_HPD */ +PAD_CFG_NF(GPP_A15, NONE, DEEP, NF2), +/* USB_C0_HPD */ +PAD_CFG_NF(GPP_A19, NONE, DEEP, NF1), +/* USB_C1_HPD */ +PAD_CFG_NF(GPP_A20, NONE, DEEP, NF1), /* TCH_PNL2_INT_N */ PAD_CFG_GPI_APIC_EDGE_LOW(GPP_B3, NONE, PLTRST), /* TC_RETIMER_FORCE_PWR */ diff --git a/src/mainboard/intel/icelake_rvp/variants/icl_y/gpio.c b/src/mainboard/intel/icelake_rvp/variants/icl_y/gpio.c index ea96cbc..9076b93 100644 --- a/src/mainboard/intel/icelake_rvp/variants/icl_y/gpio.c +++ b/src/mainboard/intel/icelake_rvp/variants/icl_y/gpio.c @@ -25,8 +25,14 @@ PAD_CFG_GPI(GPP_A10, NONE, PLTRST), /* TCH_PNL2_RST_N */ PAD_CFG_GPO(GPP_A13, 1, DEEP), -/* ONBOARD_X4_PCIE_SLOT1_PWREN_N */ -PAD_CFG_GPO(GPP_A14, 0, DEEP), +/* USB_C2_HPD */ +PAD_CFG_NF(GPP_A14, NONE, DEEP, NF2), +/* USB_C3_HPD */ +PAD_CFG_NF(GPP_A15, NONE, DEEP, NF2), +/* USB_C0_HPD */ +PAD_CFG_NF(GPP_A19, NONE, DEEP, NF1), +/* USB_C1_HPD */ +PAD_CFG_NF(GPP_A20, NONE, DEEP, NF1), /* TCH_PNL2_INT_N */ PAD_CFG_GPI_APIC_EDGE_LOW(GPP_B3, NONE, PLTRST), /* TC_RETIMER_FORCE_PWR */ -- To view, visit https://review.coreboot.org/c/coreboot/+/31362 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ic76a6ac88de41b8cb5ff5c724e8ff9b9d7996a61 Gerrit-Change-Number: 31362 Gerrit-PatchSet: 1 Gerrit-Owner: Aamir Bohra <aamir.bohra(a)intel.com> Gerrit-MessageType: newchange

3 2

Change in ...coreboot[master]: libpayload: Draw time_t and suseconds_t into sys/types.h
by Nico Huber (Code Review) 10 Jun '23

10 Jun '23

Nico Huber has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31379 Change subject: libpayload: Draw time_t and suseconds_t into sys/types.h ...................................................................... libpayload: Draw time_t and suseconds_t into sys/types.h These are not architecture specific and were the only reason to include `arch/types.h` in `sys/types.h`. Beware this may break payloads that assume non-standard definitions in `sys/types.h`. Change-Id: I00d513a4775b013221df98d3d96c096320663cdd Signed-off-by: Nico Huber <nico.h(a)gmx.de> --- M payloads/libpayload/include/arm/arch/types.h M payloads/libpayload/include/arm64/arch/types.h M payloads/libpayload/include/mips/arch/types.h M payloads/libpayload/include/sys/types.h M payloads/libpayload/include/x86/arch/types.h 5 files changed, 2 insertions(+), 13 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/79/31379/1 diff --git a/payloads/libpayload/include/arm/arch/types.h b/payloads/libpayload/include/arm/arch/types.h index 1bd815b..641fb0a 100644 --- a/payloads/libpayload/include/arm/arch/types.h +++ b/payloads/libpayload/include/arm/arch/types.h @@ -50,9 +50,6 @@ typedef signed long long int64_t; typedef signed long long s64; -typedef long time_t; -typedef long suseconds_t; - #ifndef NULL #define NULL ((void *)0) #endif diff --git a/payloads/libpayload/include/arm64/arch/types.h b/payloads/libpayload/include/arm64/arch/types.h index 1bd815b..641fb0a 100644 --- a/payloads/libpayload/include/arm64/arch/types.h +++ b/payloads/libpayload/include/arm64/arch/types.h @@ -50,9 +50,6 @@ typedef signed long long int64_t; typedef signed long long s64; -typedef long time_t; -typedef long suseconds_t; - #ifndef NULL #define NULL ((void *)0) #endif diff --git a/payloads/libpayload/include/mips/arch/types.h b/payloads/libpayload/include/mips/arch/types.h index afa3a37..32537b8 100644 --- a/payloads/libpayload/include/mips/arch/types.h +++ b/payloads/libpayload/include/mips/arch/types.h @@ -62,9 +62,6 @@ typedef unsigned long phys_addr_t; typedef unsigned long phys_size_t; -typedef long time_t; -typedef long suseconds_t; - #ifndef NULL #define NULL ((void *)0) #endif diff --git a/payloads/libpayload/include/sys/types.h b/payloads/libpayload/include/sys/types.h index 0ed4975..f7e0598 100644 --- a/payloads/libpayload/include/sys/types.h +++ b/payloads/libpayload/include/sys/types.h @@ -30,7 +30,8 @@ #ifndef _SYS_TYPES_H #define _SYS_TYPES_H -#include <arch/types.h> +typedef long time_t; +typedef long suseconds_t; typedef signed long int off_t; diff --git a/payloads/libpayload/include/x86/arch/types.h b/payloads/libpayload/include/x86/arch/types.h index 1bd815b..641fb0a 100644 --- a/payloads/libpayload/include/x86/arch/types.h +++ b/payloads/libpayload/include/x86/arch/types.h @@ -50,9 +50,6 @@ typedef signed long long int64_t; typedef signed long long s64; -typedef long time_t; -typedef long suseconds_t; - #ifndef NULL #define NULL ((void *)0) #endif -- To view, visit https://review.coreboot.org/c/coreboot/+/31379 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I00d513a4775b013221df98d3d96c096320663cdd Gerrit-Change-Number: 31379 Gerrit-PatchSet: 1 Gerrit-Owner: Nico Huber <nico.h(a)gmx.de> Gerrit-MessageType: newchange

3 4

Change in ...coreboot[master]: intel/apollolake: mark read only SRAM as reserved
by Christian Gmeiner (Code Review) 10 Jun '23

10 Jun '23

Christian Gmeiner has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31462 Change subject: intel/apollolake: mark read only SRAM as reserved ...................................................................... intel/apollolake: mark read only SRAM as reserved Change-Id: I0ccb40f30e8596b3f57e30901efdbd5d6f9529f1 Signed-off-by: Christian Gmeiner <christian.gmeiner(a)gmail.com> --- M src/soc/intel/apollolake/mmap_boot.c 1 file changed, 9 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/62/31462/1 diff --git a/src/soc/intel/apollolake/mmap_boot.c b/src/soc/intel/apollolake/mmap_boot.c index 1c3077e..a1de8ea 100644 --- a/src/soc/intel/apollolake/mmap_boot.c +++ b/src/soc/intel/apollolake/mmap_boot.c @@ -18,6 +18,7 @@ #include <arch/early_variables.h> #include <boot_device.h> +#include <bootmem.h> #include <cbfs.h> #include <commonlib/region.h> #include <console/console.h> @@ -146,3 +147,11 @@ .name = "IAFW Locator", .locate = iafw_boot_region_properties, }; + +void bootmem_platform_add_ranges(void) +{ + const int size = 256 * KiB; + + /* read only SRAM */ + bootmem_add_range(0x100000000 - size, size, BM_MEM_RESERVED); +} \ No newline at end of file -- To view, visit https://review.coreboot.org/c/coreboot/+/31462 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0ccb40f30e8596b3f57e30901efdbd5d6f9529f1 Gerrit-Change-Number: 31462 Gerrit-PatchSet: 1 Gerrit-Owner: Christian Gmeiner <christian.gmeiner(a)gmail.com> Gerrit-MessageType: newchange

5 7

Change in ...coreboot[master]: asrock/e350m1: Enable Core Performance Boost
by Paul Menzel (Code Review) 10 Jun '23

10 Jun '23

Paul Menzel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/31417 Change subject: asrock/e350m1: Enable Core Performance Boost ...................................................................... asrock/e350m1: Enable Core Performance Boost Allow one core to temporarily exceed the maximum frequency. [1]: https://3mdeb.com/firmware/amd-cpu-boost/ Change-Id: If76389a16aed9df86f43e3aaed41a196288c3bb2 Signed-off-by: Paul Menzel <pmenzel(a)molgen.mpg.de> --- M src/mainboard/asrock/e350m1/buildOpts.c 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/17/31417/1 diff --git a/src/mainboard/asrock/e350m1/buildOpts.c b/src/mainboard/asrock/e350m1/buildOpts.c index 14621e0..dc4df43 100644 --- a/src/mainboard/asrock/e350m1/buildOpts.c +++ b/src/mainboard/asrock/e350m1/buildOpts.c @@ -151,7 +151,7 @@ #define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 #define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 #define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 -//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto +#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto #define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST #define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList #define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE -- To view, visit https://review.coreboot.org/c/coreboot/+/31417 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: If76389a16aed9df86f43e3aaed41a196288c3bb2 Gerrit-Change-Number: 31417 Gerrit-PatchSet: 1 Gerrit-Owner: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-MessageType: newchange

2 2

Change in coreboot[master]: arch/x86: Add option to compress postcar stage
by Arthur Heymans (Code Review) 10 May '23

10 May '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36674 ) Change subject: arch/x86: Add option to compress postcar stage ...................................................................... arch/x86: Add option to compress postcar stage The LZ4 decompressor was already linked in romstage. Change-Id: I89fdc6066027447bf72968c66e6f5eb5fbb630c7 Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/Kconfig M src/arch/x86/Makefile.inc 2 files changed, 19 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/74/36674/1 diff --git a/src/Kconfig b/src/Kconfig index 0d56291..17bf545 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -158,6 +158,16 @@ that decompression might slow down booting if the boot flash is connected through a slow link (i.e. SPI). +config COMPRESS_POSTCAR + bool "Compress postcar with LZ4" + depends on POSTCAR_STAGE + # Default value set at the end of the file + help + Compress postcar with LZ4 to save flash space and speed up boot, + since the time for reading the image from SPI (and in the vboot + case verifying it) is usually much greater than the time spent + decompressing. + config COMPRESS_PRERAM_STAGES bool "Compress romstage and verstage with LZ4" depends on !ARCH_X86 && (HAVE_ROMSTAGE || HAVE_VERSTAGE) @@ -1203,6 +1213,9 @@ config COMPRESS_RAMSTAGE default y if !UNCOMPRESSED_RAMSTAGE +config COMPRESS_POSTCAR + default y + config COMPRESS_PRERAM_STAGES depends on !ARCH_X86 default y diff --git a/src/arch/x86/Makefile.inc b/src/arch/x86/Makefile.inc index 447fd57..8c35176 100644 --- a/src/arch/x86/Makefile.inc +++ b/src/arch/x86/Makefile.inc @@ -278,11 +278,16 @@ $(objcbfs)/postcar.elf: $(objcbfs)/postcar.debug.rmod cp $< $@ +CBFS_POSTCAR_COMPRESS_FLAG := none +ifeq ($(CONFIG_COMPRESS_POSTCAR),y) +CBFS_POSTCAR_COMPRESS_FLAG := lz4 +endif + # Add postcar to CBFS cbfs-files-$(CONFIG_POSTCAR_STAGE) += $(CONFIG_CBFS_PREFIX)/postcar $(CONFIG_CBFS_PREFIX)/postcar-file := $(objcbfs)/postcar.elf $(CONFIG_CBFS_PREFIX)/postcar-type := stage -$(CONFIG_CBFS_PREFIX)/postcar-compression := none +$(CONFIG_CBFS_PREFIX)/postcar-compression := $(CBFS_POSTCAR_COMPRESS_FLAG) ############################################################################### # ramstage -- To view, visit https://review.coreboot.org/c/coreboot/+/36674 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I89fdc6066027447bf72968c66e6f5eb5fbb630c7 Gerrit-Change-Number: 36674 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

10 24

Change in ...coreboot[master]: mb/lenovo/x60: Override default SPI OPs
by Arthur Heymans (Code Review) 10 May '23

10 May '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33041 Change subject: mb/lenovo/x60: Override default SPI OPs ...................................................................... mb/lenovo/x60: Override default SPI OPs The thinkpad X60 with SST flash needs different SPI OPs to make flashrom happy. flashrom uses AAI for writing. One potential issue is that fast_read is not possible anymore, but on x86 the flash is memory mapped so this won't matter. Change-Id: Id65fc632b33962bd505283c842c45feb85c75e5f Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/mainboard/lenovo/x60/mainboard.c 1 file changed, 24 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/41/33041/1 diff --git a/src/mainboard/lenovo/x60/mainboard.c b/src/mainboard/lenovo/x60/mainboard.c index 274a151..3aef020 100644 --- a/src/mainboard/lenovo/x60/mainboard.c +++ b/src/mainboard/lenovo/x60/mainboard.c @@ -15,6 +15,7 @@ * GNU General Public License for more details. */ +#include <spi_flash.h> #include <device/pci_def.h> #include <device/pci_ids.h> #include <device/device.h> @@ -26,6 +27,7 @@ #include <drivers/intel/gma/int15.h> #include <drivers/lenovo/lenovo.h> #include <arch/acpigen.h> +#include <southbridge/intel/common/spi.h> #define PANEL INT15_5F35_CL_DISPLAY_DEFAULT @@ -66,6 +68,28 @@ return ARRAY_SIZE(cst_entries); } + +static const struct intel_spi_config spi_config_sst = { + .opprefixes = {0x06, 0x50}, + .ops = {{0x01, WRITE_NO_ADDR}, /* WRSR: Write Status Register */ + {0x02, WRITE_WITH_ADDR}, /* BYPR: Byte Program */ + {0x03, READ_WITH_ADDR}, /* READ: Read Data */ + {0x05, READ_NO_ADDR}, /* RDSR: Read Status Register */ + {0x20, WRITE_WITH_ADDR}, /* SE20: Sector Erase 0x20 */ + {0x9f, READ_NO_ADDR}, /* RDID: Read ID */ + {0xad, WRITE_NO_ADDR}, /* Auto Address Increment Word Program */ + {0x04, WRITE_NO_ADDR}} /* Write Disable */ +}; + +void intel_southbridge_override_spi(struct intel_spi_config *spi_config) +{ + const struct spi_flash *flash = boot_device_spi_flash(); + + if (strcmp(flash->name, "SST25VF016B") == 0) { + memcpy(spi_config, &spi_config_sst, sizeof(spi_config_sst)); + } +} + static void mainboard_init(struct device *dev) { struct device *idedev, *sdhci_dev; -- To view, visit https://review.coreboot.org/c/coreboot/+/33041 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Id65fc632b33962bd505283c842c45feb85c75e5f Gerrit-Change-Number: 33041 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-MessageType: newchange

3 15

Change in ...coreboot[master]: mb/apple: Add MacBook Air 5,2 (A1466)
by Evgeny Zinoviev (Code Review) 08 Apr '23

08 Apr '23

Evgeny Zinoviev has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32604 Change subject: mb/apple: Add MacBook Air 5,2 (A1466) ...................................................................... mb/apple: Add MacBook Air 5,2 (A1466) This is WIP. Change-Id: I1ebe6f87a8254871698be74f913b9d969d722447 Signed-off-by: Evgeny Zinoviev <me(a)ch1p.io> --- A src/mainboard/apple/macbookair5_2/Kconfig A src/mainboard/apple/macbookair5_2/Kconfig.name A src/mainboard/apple/macbookair5_2/Makefile.inc A src/mainboard/apple/macbookair5_2/acpi/ec.asl A src/mainboard/apple/macbookair5_2/acpi/platform.asl A src/mainboard/apple/macbookair5_2/acpi/superio.asl A src/mainboard/apple/macbookair5_2/acpi_tables.c A src/mainboard/apple/macbookair5_2/board_info.txt A src/mainboard/apple/macbookair5_2/devicetree.cb A src/mainboard/apple/macbookair5_2/dsdt.asl A src/mainboard/apple/macbookair5_2/gma-mainboard.ads A src/mainboard/apple/macbookair5_2/gnvs.c A src/mainboard/apple/macbookair5_2/gpio.c A src/mainboard/apple/macbookair5_2/hda_verb.c A src/mainboard/apple/macbookair5_2/mainboard.c A src/mainboard/apple/macbookair5_2/romstage.c A src/mainboard/apple/macbookair5_2/spd.bin 17 files changed, 843 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/04/32604/1 diff --git a/src/mainboard/apple/macbookair5_2/Kconfig b/src/mainboard/apple/macbookair5_2/Kconfig new file mode 100644 index 0000000..853021f --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/Kconfig @@ -0,0 +1,55 @@ +if BOARD_APPLE_MACBOOKAIR5_2 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select EC_ACPI + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select NORTHBRIDGE_INTEL_IVYBRIDGE + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_C216 + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + select MAINBOARD_HAS_LIBGFXINIT + select GFX_GMA_INTERNAL_IS_LVDS + select SERIRQ_CONTINUOUS_MODE + +config MAINBOARD_DIR + string + default apple/macbookair5_2 + +config MAINBOARD_PART_NUMBER + string + default "MacBookAir5,2" + +config VGA_BIOS_FILE + string + default "pci8086,0166.rom" + +config VGA_BIOS_ID + string + default "8086,0166" + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x7270 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x8086 + +config DRAM_RESET_GATE_GPIO # FIXME: check this + int + default 60 + +config MAX_CPUS + int + default 8 + +config MAINBOARD_SMBIOS_MANUFACTURER + string + default "Apple Inc." + +endif diff --git a/src/mainboard/apple/macbookair5_2/Kconfig.name b/src/mainboard/apple/macbookair5_2/Kconfig.name new file mode 100644 index 0000000..d8a1fbf --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_APPLE_MACBOOKAIR5_2 + bool "MacBookAir5,2" diff --git a/src/mainboard/apple/macbookair5_2/Makefile.inc b/src/mainboard/apple/macbookair5_2/Makefile.inc new file mode 100644 index 0000000..fd60338 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/Makefile.inc @@ -0,0 +1,7 @@ +romstage-y += gpio.c + +cbfs-files-y += spd.bin +spd.bin-file := spd.bin +spd.bin-type := spd + +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/apple/macbookair5_2/acpi/ec.asl b/src/mainboard/apple/macbookair5_2/acpi/ec.asl new file mode 100644 index 0000000..f70cb3d --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi/ec.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Device(EC) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 0) + Name (_GPE, 23) +/* FIXME: EC support */ +} diff --git a/src/mainboard/apple/macbookair5_2/acpi/platform.asl b/src/mainboard/apple/macbookair5_2/acpi/platform.asl new file mode 100644 index 0000000..a17c6ea --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi/platform.asl @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Method(_WAK,1) +{ + /* FIXME: EC support */ + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ + /* FIXME: EC support */ +} diff --git a/src/mainboard/apple/macbookair5_2/acpi/superio.asl b/src/mainboard/apple/macbookair5_2/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi/superio.asl diff --git a/src/mainboard/apple/macbookair5_2/acpi_tables.c b/src/mainboard/apple/macbookair5_2/acpi_tables.c new file mode 100644 index 0000000..c48f0bd --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/acpi_tables.c @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +/* FIXME: check this function. */ +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + // the lid is open by default. + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/apple/macbookair5_2/board_info.txt b/src/mainboard/apple/macbookair5_2/board_info.txt new file mode 100644 index 0000000..cbd72ee --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/board_info.txt @@ -0,0 +1,6 @@ +Category: laptop +ROM protocol: SPI +Flashrom support: n +ROM package: WSON-8 +ROM socketed: n +Release year: 2012 diff --git a/src/mainboard/apple/macbookair5_2/devicetree.cb b/src/mainboard/apple/macbookair5_2/devicetree.cb new file mode 100644 index 0000000..efc5ddb --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/devicetree.cb @@ -0,0 +1,119 @@ +chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did + register "gfx.did" = "{ 0x80000410, 0x80000320, 0x80000410, 0x80000410, 0x00000005 }" + #register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.link_frequency_270_mhz" = "0" + register "gfx.ndid" = "2" + register "gfx.use_spread_spectrum_clock" = "1" + register "gpu_cpu_backlight" = "0x00000710" + register "gpu_dp_b_hotplug" = "4" + register "gpu_dp_c_hotplug" = "4" + register "gpu_dp_d_hotplug" = "4" + register "gpu_panel_port_select" = "1" + register "gpu_panel_power_backlight_off_delay" = "2000" + register "gpu_panel_power_backlight_on_delay" = "10" + register "gpu_panel_power_cycle_delay" = "6" + register "gpu_panel_power_down_delay" = "740" + register "gpu_panel_power_up_delay" = "2000" + register "gpu_pch_backlight" = "0x07100710" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax # FIXME: check all registers + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on end + device lapic 0xacac off end + end + end + + register "pci_mmio_size" = "2048" + + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "0" + register "gen1_dec" = "0x000c0681" + register "gen2_dec" = "0x000c1641" + register "gen3_dec" = "0x001c0301" + register "gen4_dec" = "0x00fc0701" + register "gpi7_routing" = "2" + register "p_cnt_throttling_supported" = "1" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x1" + register "spi_lvscc" = "0x0" + register "spi_uvscc" = "0x2005" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x08040201" + register "xhci_switchable_ports" = "0x0000000f" + device pci 14.0 on # USB 3.0 Controller + subsystemid 0x8086 0x7270 + end + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x8086 0x7270 + end + device pci 16.1 off # Management Engine Interface 2 + end + device pci 16.2 off # Management Engine IDE-R + end + device pci 16.3 off # Management Engine KT + end + device pci 19.0 off # Intel Gigabit Ethernet + end + device pci 1a.0 on # USB2 EHCI #2 + subsystemid 0x8086 0x7270 + end + device pci 1b.0 on # High Definition Audio Audio controller + subsystemid 0x8086 0x7270 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x8086 0x7270 + end + device pci 1c.1 on # PCIe Port #2 + subsystemid 0x8086 0x7270 + end + device pci 1c.2 off # PCIe Port #3 + end + device pci 1c.3 off # PCIe Port #4 + end + device pci 1c.4 on # PCIe Port #5 + subsystemid 0x8086 0x7270 + end + device pci 1c.5 off # PCIe Port #6 + end + device pci 1c.6 off # PCIe Port #7 + end + device pci 1c.7 off # PCIe Port #8 + end + device pci 1d.0 on # USB2 EHCI #1 + subsystemid 0x8086 0x7270 + end + device pci 1e.0 off # PCI bridge + end + device pci 1f.0 on # LPC bridge PCI-LPC bridge + subsystemid 0x8086 0x7270 + end + device pci 1f.2 on # SATA Controller 1 + subsystemid 0x8086 0x7270 + end + device pci 1f.3 on # SMBus + subsystemid 0x8086 0x7270 + end + device pci 1f.5 off # SATA Controller 2 + end + device pci 1f.6 off # Thermal + end + end + device pci 00.0 on # Host bridge Host bridge + subsystemid 0x106b 0x00fe + end + device pci 01.0 off # PCIe Bridge for discrete graphics + end + device pci 02.0 on # Internal graphics VGA controller + subsystemid 0x106b 0x00fe + end + end +end diff --git a/src/mainboard/apple/macbookair5_2/dsdt.asl b/src/mainboard/apple/macbookair5_2/dsdt.asl new file mode 100644 index 0000000..455ac17 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/dsdt.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB +#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB +#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0 + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI 2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 // OEM revision +) +{ + /* Some generic macros */ + #include "acpi/platform.asl" + #include <cpu/intel/common/acpi/cpu.asl> + #include <southbridge/intel/bd82x6x/acpi/platform.asl> + /* global NVS and variables. */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> + + Device (\_SB.PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <drivers/intel/gma/acpi/default_brightness_levels.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } +} diff --git a/src/mainboard/apple/macbookair5_2/gma-mainboard.ads b/src/mainboard/apple/macbookair5_2/gma-mainboard.ads new file mode 100644 index 0000000..d4a5d7d --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/gma-mainboard.ads @@ -0,0 +1,34 @@ +-- +-- This file is part of the coreboot project. +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (DP1, + DP2, + DP3, + HDMI1, + HDMI2, + HDMI3, + Analog, + Internal, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/apple/macbookair5_2/gnvs.c b/src/mainboard/apple/macbookair5_2/gnvs.c new file mode 100644 index 0000000..def9e5f --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/gnvs.c @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/bd82x6x/nvs.h> + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* the lid is open by default. */ + gnvs->lids = 1; + + gnvs->tcrt = 100; + gnvs->tpsv = 90; +} diff --git a/src/mainboard/apple/macbookair5_2/gpio.c b/src/mainboard/apple/macbookair5_2/gpio.c new file mode 100644 index 0000000..9f2cd14 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/gpio.c @@ -0,0 +1,242 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_OUTPUT, + .gpio21 = GPIO_DIR_OUTPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_LOW, + .gpio15 = GPIO_LEVEL_HIGH, + .gpio16 = GPIO_LEVEL_LOW, + .gpio19 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_LOW, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio11 = GPIO_RESET_RSMRST, + .gpio15 = GPIO_RESET_RSMRST, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio2 = GPIO_INVERT, + .gpio4 = GPIO_INVERT, + .gpio5 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_GPIO, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_OUTPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_LOW, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_LOW, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_GPIO, + .gpio65 = GPIO_MODE_GPIO, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_OUTPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, + .gpio65 = GPIO_LEVEL_LOW, + .gpio66 = GPIO_LEVEL_LOW, + .gpio67 = GPIO_LEVEL_LOW, + .gpio74 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/apple/macbookair5_2/hda_verb.c b/src/mainboard/apple/macbookair5_2/hda_verb.c new file mode 100644 index 0000000..6c8e555 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/hda_verb.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x10134206, /* Codec Vendor / Device ID: Cirrus */ + 0x106b5600, /* Subsystem ID */ + + 0x0000000b, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x106b5600), + + /* NID 0x09. */ + AZALIA_PIN_CFG(0x0, 0x09, 0x0e2b4030), + + /* NID 0x0a. */ + AZALIA_PIN_CFG(0x0, 0x0a, 0x400000f0), + + /* NID 0x0b. */ + AZALIA_PIN_CFG(0x0, 0x0b, 0x90100120), + + /* NID 0x0c. */ + AZALIA_PIN_CFG(0x0, 0x0c, 0x400000f0), + + /* NID 0x0d. */ + AZALIA_PIN_CFG(0x0, 0x0d, 0x90a00110), + + /* NID 0x0e. */ + AZALIA_PIN_CFG(0x0, 0x0e, 0x400000f0), + + /* NID 0x0f. */ + AZALIA_PIN_CFG(0x0, 0x0f, 0x400000f0), + + /* NID 0x10. */ + AZALIA_PIN_CFG(0x0, 0x10, 0x400000f0), + + /* NID 0x12. */ + AZALIA_PIN_CFG(0x0, 0x12, 0x400000f0), + + /* NID 0x15. */ + AZALIA_PIN_CFG(0x0, 0x15, 0x400000f0), + 0x80862806, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + + 0x00000004, /* Number of 4 dword sets */ + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x3, 0x80860101), + + /* NID 0x05. */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* NID 0x06. */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560010), + + /* NID 0x07. */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560010), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/apple/macbookair5_2/mainboard.c b/src/mainboard/apple/macbookair5_2/mainboard.c new file mode 100644 index 0000000..d497c51 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/mainboard.c @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <drivers/intel/gma/int15.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/acpi/ec.h> +#include <console/console.h> + +static void mainboard_init(struct device *dev) +{ + /* FIXME: trim this down or remove if necessary */ +// { +// int i; +// const u8 dmp[256] = { +// /* 00 */ 0x40, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 10 */ 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 20 */ 0x00, 0x80, 0x16, 0x16, 0xe0, 0x40, 0x4f, 0x4e, 0x7a, 0x34, 0x35, 0x31, 0x38, 0x31, 0x32, 0x44, +// /* 30 */ 0x4b, 0x52, 0x4e, 0x41, 0x38, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x41, 0x42, +// /* 40 */ 0x43, 0x44, 0x45, 0x00, 0x02, 0x14, 0x11, 0x10, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 50 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 60 */ 0x03, 0x00, 0x00, 0x00, 0x0f, 0x3d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 70 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 80 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* 90 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* a0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* b0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* c0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* d0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* e0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// /* f0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// }; +// +// printk(BIOS_DEBUG, "Replaying EC dump ..."); +// for (i = 0; i < 256; i++) +// ec_write (i, dmp[i]); +// printk(BIOS_DEBUG, "done\n"); +// } + + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00800000; +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = mainboard_init; + +// /* FIXME: fix those values*/ +// install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, +// GMA_INT15_PANEL_FIT_DEFAULT, +// GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/apple/macbookair5_2/romstage.c b/src/mainboard/apple/macbookair5_2/romstage.c new file mode 100644 index 0000000..6594b15 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/romstage.c @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* FIXME: Check if all includes are needed. */ + +#include <stdint.h> +#include <string.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <device/mmio.h> +#include <device/pci_ops.h> +#include <device/pnp_ops.h> +#include <console/console.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/common/gpio.h> +#include <cbfs.h> + +void pch_enable_lpc(void) +{ + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x40, 0x00000401); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0070); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x000c0681); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000c1641); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x001c0301); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x00fc0701); +} + +void mainboard_rcba_config(void) +{ + RCBA32(0x3414) = 0x00000020; +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, 0 }, + { 1, 0, 1 }, + { 1, 0, 2 }, + { 1, 0, 3 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 0, -1 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + void *spd_file; + size_t spd_file_len = 0; + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (spd_file && spd_file_len >= 512) { + memcpy(&spd[0], spd_file, 128); + memcpy(&spd[2], spd_file + 256, 128); + } +} diff --git a/src/mainboard/apple/macbookair5_2/spd.bin b/src/mainboard/apple/macbookair5_2/spd.bin new file mode 100644 index 0000000..2e2a6b4 --- /dev/null +++ b/src/mainboard/apple/macbookair5_2/spd.bin Binary files differ -- To view, visit https://review.coreboot.org/c/coreboot/+/32604 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I1ebe6f87a8254871698be74f913b9d969d722447 Gerrit-Change-Number: 32604 Gerrit-PatchSet: 1 Gerrit-Owner: Evgeny Zinoviev <me(a)ch1p.com> Gerrit-MessageType: newchange

7 59

Change in coreboot[master]: mb/gigabyte: Add Gigabyte Z170X-Gaming 7
by Christoph Pomaska (Code Review) 20 Mar '23

20 Mar '23

Christoph Pomaska has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/38920 ) Change subject: mb/gigabyte: Add Gigabyte Z170X-Gaming 7 ...................................................................... mb/gigabyte: Add Gigabyte Z170X-Gaming 7 Change-Id: Ib2c69bddd22cbd8f797dbb57370a4d8e5afa63bc --- A src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig A src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig.name A src/mainboard/gigabyte/ga-z170x-gaming7/Makefile.inc A src/mainboard/gigabyte/ga-z170x-gaming7/acpi/dptf.asl A src/mainboard/gigabyte/ga-z170x-gaming7/acpi/ec.asl A src/mainboard/gigabyte/ga-z170x-gaming7/acpi/mainboard.asl A src/mainboard/gigabyte/ga-z170x-gaming7/acpi/superio.asl A src/mainboard/gigabyte/ga-z170x-gaming7/board_info.txt A src/mainboard/gigabyte/ga-z170x-gaming7/cmos.default A src/mainboard/gigabyte/ga-z170x-gaming7/cmos.layout A src/mainboard/gigabyte/ga-z170x-gaming7/devicetree.cb A src/mainboard/gigabyte/ga-z170x-gaming7/dsdt.asl A src/mainboard/gigabyte/ga-z170x-gaming7/gma-mainboard.ads A src/mainboard/gigabyte/ga-z170x-gaming7/gpio.h A src/mainboard/gigabyte/ga-z170x-gaming7/hda_verb.c A src/mainboard/gigabyte/ga-z170x-gaming7/include/gpio.h A src/mainboard/gigabyte/ga-z170x-gaming7/mainboard.c A src/mainboard/gigabyte/ga-z170x-gaming7/ramstage.c A src/mainboard/gigabyte/ga-z170x-gaming7/romstage.c 19 files changed, 1,704 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/20/38920/1 diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig b/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig new file mode 100644 index 0000000..3218b39 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig @@ -0,0 +1,49 @@ +if BOARD_GIGABYTE_GA_Z170X_GAMING_7 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_16384 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select INTEL_GMA_HAVE_VBT + select INTEL_INT15 + select SOC_INTEL_KABYLAKE + select SKYLAKE_SOC_PCH_H + select SUPERIO_ITE_IT8528E # board has actually IT8628E + +config IRQ_SLOT_COUNT + int + default 18 + +config MAINBOARD_DIR + string + default "gigabyte/ga-z170x-gaming7" + +config MAINBOARD_PART_NUMBER + string + default "Z170X-Gaming 7" + +config MAX_CPUS + int + default 8 + +config DEVICETREE + string + default "devicetree.cb" + +config PRERAM_CBMEM_CONSOLE_SIZE + hex + default 0xd00 + +config DIMM_SPD_SIZE + int + default 512 #DDR4 + +# This is overridden if CMOS is used for configuration values. +config MAINBOARD_POWER_ON_AFTER_POWER_FAIL + bool + default n + +endif diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig.name b/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig.name new file mode 100644 index 0000000..a0ff2d5 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_GIGABYTE_Z170X_GAMING_7 + bool "GA-Z170X-Gaming 7" diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/Makefile.inc b/src/mainboard/gigabyte/ga-z170x-gaming7/Makefile.inc new file mode 100644 index 0000000..223820e --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/Makefile.inc @@ -0,0 +1,20 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## Copyright (C) 2016 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +ramstage-y += mainboard.c +ramstage-y += ramstage.c +ramstage-y += hda_verb.c +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/dptf.asl b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/dptf.asl new file mode 100644 index 0000000..4453f3b --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/dptf.asl @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Google Inc. + * Copyright (C) 2015 Intel Corporation. + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DPTF_CPU_PASSIVE 98 +#define DPTF_CPU_CRITICAL 125 +#define DPTF_CPU_ACTIVE_AC0 91 +#define DPTF_CPU_ACTIVE_AC1 85 +#define DPTF_CPU_ACTIVE_AC2 83 +#define DPTF_CPU_ACTIVE_AC3 80 +#define DPTF_CPU_ACTIVE_AC4 75 + +Name (DTRT, Package () { + /* CPU Throttle Effect on CPU */ + Package () { \_SB.PCI0.B0D4, \_SB.PCI0.B0D4, 100, 50, 0, 0, 0, 0 }, + +}) + +Name (MPPC, Package () +{ + 0x2, /* Revision */ + Package () { /* Power Limit 1 */ + 0, /* PowerLimitIndex, 0 for Power Limit 1 */ + 10000, /* PowerLimitMinimum */ + 31000, /* PowerLimitMaximum */ + 28000, /* TimeWindowMinimum */ + 28000, /* TimeWindowMaximum */ + 100 /* StepSize */ + }, + Package () { /* Power Limit 2 */ + 1, /* PowerLimitIndex, 1 for Power Limit 2 */ + 15000, /* PowerLimitMinimum */ + 65000, /* PowerLimitMaximum */ + 28000, /* TimeWindowMinimum */ + 28000, /* TimeWindowMaximum */ + 100 /* StepSize */ + } +}) + +/* Include DPTF */ +#include <soc/intel/skylake/acpi/dptf/dptf.asl> diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/ec.asl b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/ec.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/ec.asl diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/mainboard.asl b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/mainboard.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/mainboard.asl diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/superio.asl b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/superio.asl new file mode 100644 index 0000000..8b13789 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/acpi/superio.asl @@ -0,0 +1 @@ + diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/board_info.txt b/src/mainboard/gigabyte/ga-z170x-gaming7/board_info.txt new file mode 100644 index 0000000..c6b7655 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/board_info.txt @@ -0,0 +1,7 @@ +Category: desktop +Board URL: https://www.gigabyte.com/Motherboard/GA-Z170X-Gaming-7-rev-10 +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y +Release year: 2015 diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.default b/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.default new file mode 100644 index 0000000..3296093 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.default @@ -0,0 +1,4 @@ +boot_option=Fallback +debug_level=Debug +power_on_after_fail=Disable +nmi=Enable diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.layout b/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.layout new file mode 100644 index 0000000..916db62 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/cmos.layout @@ -0,0 +1,125 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2016 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +388 4 h 0 reboot_counter +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +#392 3 r 0 unused +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv +#544 440 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +6 0 Emergency +6 1 Alert +6 2 Critical +6 3 Error +6 4 Warning +6 5 Notice +6 6 Info +6 7 Debug +6 8 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/devicetree.cb b/src/mainboard/gigabyte/ga-z170x-gaming7/devicetree.cb new file mode 100644 index 0000000..29fbd71 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/devicetree.cb @@ -0,0 +1,439 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2017 Intel Corporation. +## Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip soc/intel/skylake + + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "0" + register "deep_s5_enable_dc" = "0" + register "deep_sx_config" = "DSX_EN_WAKE_PIN" + + register "eist_enable" = "1" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # Set @0x280-0x2ff I/O Range for SuperIO HWM + register "gen1_dec" = "0x00fc0201" + register "gen2_dec" = "0x007c0a01" + register "gen3_dec" = "0x000c0081" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable DPTF + register "dptf_enable" = "1" + + # FSP Configuration + register "SmbusEnable" = "1" + register "ScsEmmcEnabled" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "0" + register "HeciEnabled" = "0" + register "SkipExtGfxScan" = "0" + register "PrimaryDisplay" = "Display_PEG" + register "Device4Enable" = "1" + register "SaGv" = "SaGv_Enabled" + register "PmTimerDisabled" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "0" + register "PchHdaVcType" = "Vc1" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # Set LPC Serial IRQ mode + register "serirq_mode" = "SERIRQ_CONTINUOUS" + + # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch + # SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s + register "PmConfigSlpS3MinAssert" = "0x02" + + # SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s + register "PmConfigSlpS4MinAssert" = "0x04" + + # SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s + register "PmConfigSlpSusMinAssert" = "0x03" + + # SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s + register "PmConfigSlpAMinAssert" = "0x03" + + # VR Settings Configuration + #+----------------+-------+-------+-------------+-------+ + #| Domain/Setting | SA | IA | GT Unsliced | GT | + #+----------------+-------+-------+-------------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax* | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------------+-------+ + # * - is set automatically in the vr_config.c + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), \ + .psi2threshold = VR_CFG_AMP(4), \ + .psi3threshold = VR_CFG_AMP(1), \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 1520 \ + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), \ + .psi2threshold = VR_CFG_AMP(5), \ + .psi3threshold = VR_CFG_AMP(1), \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 1520 \ + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), \ + .psi2threshold = VR_CFG_AMP(5), \ + .psi3threshold = VR_CFG_AMP(1), \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0 ,\ + .voltage_limit = 1520 \ + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), \ + .psi2threshold = VR_CFG_AMP(5), \ + .psi3threshold = VR_CFG_AMP(1), \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 1520 \ + }" + + register "EnableLan" = "1" + register "PmTimerDisabled" = "0" + + # USB + register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[2]" = "USB2_PORT_MID(OC4)" + register "usb2_ports[3]" = "USB2_PORT_MID(OC4)" + register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" + register "usb2_ports[5]" = "USB2_PORT_MID(OC2)" + register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[8]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[9]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[10]" = "USB2_PORT_MID(OC1)" + register "usb2_ports[11]" = "USB2_PORT_MID(OC1)" + register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)" + register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)" + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)" + register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)" + + # SATA + register "EnableSata" = "1" + register "SataSalpSupport" = "1" + register "SataPortsEnable" = "{ \ + [0] = 1, \ + [1] = 1, \ + [2] = 1, \ + [3] = 1, \ + [4] = 0, \ + [5] = 0, \ + }" + # SATA4 and SATA5 are located in the lower right corner + # of the board, but there is no connector for this + + # PCH UART, SPI, I2C + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart0] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart2] = PchSerialIoDisabled, \ + }" + + # Set params for PEG 0:1:0 + register "Peg0MaxLinkWidth" = "Peg0_x16" + # Configure PCIe clockgen in PCH + # PEG0 uses SRCCLKREQ0 and CLKSRC0 + register "PcieRpClkReqSupport[0]" = "1" + register "PcieRpClkReqNumber[0]" = "0" + register "PcieRpClkSrcNumber[0]" = "0" + + # Enable Root port 6(x1) for LAN. + register "PcieRpEnable[5]" = "1" + # Disable CLKREQ#, since onboard LAN is always present + register "PcieRpClkReqSupport[5]" = "0" + # Enable Advanced Error Reporting + register "PcieRpAdvancedErrorReporting[5]" = "1" + # Enable Latency Tolerance Reporting Mechanism + register "PcieRpLtrEnable[5]" = "1" + # Use CLK SRC 1 + register "PcieRpClkSrcNumber[5]" = "1" + + # Enable Root port 5 (x1) for PCIE slot. + register "PcieRpEnable[4]" = "1" + # Enable CLKREQ# + register "PcieRpClkReqSupport[4]" = "1" + # Use SRCCLKREQ2# + register "PcieRpClkReqNumber[4]" = "2" + # Enable Advanced Error Reporting + register "PcieRpAdvancedErrorReporting[4]" = "1" + # Enable Latency Tolerance Reporting Mechanism + register "PcieRpLtrEnable[4]" = "1" + # Use CLK SRC 2 + register "PcieRpClkSrcNumber[4]" = "2" + # Use Hot Plug subsystem + register "PcieRpHotPlug[4]" = "1" + + # Enable Root port 7(x1) for PCIE slot. + register "PcieRpEnable[6]" = "1" + # Enable CLKREQ# + register "PcieRpClkReqSupport[6]" = "1" + # Use SRCCLKREQ3# + register "PcieRpClkReqNumber[6]" = "3" + # Enable Advanced Error Reporting + register "PcieRpAdvancedErrorReporting[6]" = "1" + # Enable Latency Tolerance Reporting Mechanism + register "PcieRpLtrEnable[6]" = "1" + # Use CLK SRC 3 + register "PcieRpClkSrcNumber[6]" = "3" + # Use Hot Plug subsystem + register "PcieRpHotPlug[6]" = "1" + + # PL2 override 95W + register "tdp_pl2_override" = "95" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on # Host Bridge + subsystemid 0x1849 0x191f + end + device pci 01.0 on # PEG + subsystemid 0x1849 0x1901 + end + device pci 02.0 on # Integrated Graphics Device + subsystemid 0x1849 0x1912 + end + device pci 14.0 on # USB xHCI + subsystemid 0x1849 0xa131 + end + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 off # Thermal Subsystem + #subsystemid 0x1849 0xa131 + end + device pci 15.0 off end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on # Management Engine Interface 1 + subsystemid 0x1849 0xa131 + end + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on # SATA + subsystemid 0x1b21 0x0612 + end + device pci 19.0 off end # UART #2 + device pci 19.1 off end # I2C #5 + device pci 19.2 off end # I2C #4 + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 on end # PCI Express Port 2 + device pci 1c.2 on # Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller + subsystemid 0x1969 0xe0a1 + off + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 on end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 off end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1e.4 off end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 off end # SDCard + device pci 1f.0 on # LPC bridge + subsystemid 0x1849 0x1a43 + + chip superio/common + device pnp 2e.0 on # passes SIO base addr to SSDT gen + + chip superio/nuvoton/nct6791d + device pnp 2e.1 on + # Global Control Registers + # Device IRQ Polarity + irq 0x13 = 0x00 + irq 0x14 = 0x00 + # Global Option + irq 0x24 = 0xfb + irq 0x27 = 0x10 + # Multi Function + irq 0x1a = 0xb0 + irq 0x1b = 0xe6 + irq 0x2a = 0x04 + irq 0x2c = 0x40 + irq 0x2d = 0x03 + + # Parallel Port + io 0x60 = 0x0378 + irq 0x70 = 7 + drq 0x74 = 4 # No DMA + irq 0xf0 = 0x3c # Printer mode + end + device pnp 2e.2 on # UART A + io 0x60 = 0x03f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # IR + io 0x60 = 0x02f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 KBC + io 0x60 = 0x0060 + io 0x62 = 0x0064 + irq 0x70 = 1 # Keyboard + irq 0x72 = 12 # Mouse + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 on # GPIO6 + irq 0xf6 = 0xff + irq 0xf7 = 0xff + irq 0xf8 = 0xff + end + device pnp 2e.107 on # GPIO7 + irq 0xe0 = 0x7f + irq 0xe1 = 0x0d + end + device pnp 2e.207 on # GPIO8 + irq 0xe6 = 0xff + irq 0xe7 = 0xff + irq 0xed = 0xff + end + device pnp 2e.8 off end # WDT + device pnp 2e.108 on end # GPIO0 + device pnp 2e.308 off end # GPIO base + device pnp 2e.408 off end # WDTMEM + device pnp 2e.708 on end # GPIO1 + device pnp 2e.9 on end # GPIO2 + device pnp 2e.109 on # GPIO3 + irq 0xe4 = 0x7b + irq 0xe5 = 0x02 + irq 0xea = 0x04 + end + device pnp 2e.209 on # GPIO4 + irq 0xf0 = 0x7f + irq 0xf1 = 0x80 + end + device pnp 2e.309 on # GPIO5 + irq 0xf4 = 0xdf + irq 0xf5 = 0xd5 + end + device pnp 2e.a on + # Power RAM in S3 and let the PCH + # handle power failure actions + irq 0xe4 = 0x70 + # Set HWM reset source to LRESET# + irq 0xe7 = 0x01 + end # ACPI + device pnp 2e.b on # HWM, LED + io 0x60 = 0x0290 + io 0x62 = 0 + irq 0x70 = 0 + end + device pnp 2e.d off end # BCLK, WDT2, WDT_MEM + device pnp 2e.e off end # CIR wake-up + device pnp 2e.f off end # GPIO PP/OD + device pnp 2e.14 off end # SVID, Port 80 UART + device pnp 2e.16 off end # DS5 + device pnp 2e.116 off end # DS3 + device pnp 2e.316 on end # PCHDSW + device pnp 2e.416 off end # DSWWOPT + device pnp 2e.516 on end # DS3OPT + device pnp 2e.616 on end # DSDSS + device pnp 2e.716 off end # DSPU + end # chip superio/nuvoton/nct6791d + + end # device pnp 2e.0 + end # chip superio/common + + chip drivers/pc80/tpm + device pnp 4e.0 on end # TPM module + end + end # LPC Interface + device pci 1f.1 off end + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 on end # GbE + end +end diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/dsdt.asl b/src/mainboard/gigabyte/ga-z170x-gaming7/dsdt.asl new file mode 100644 index 0000000..1f3537e --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/dsdt.asl @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2015 Google Inc. + * Copyright (C) 2016 Intel Corporation + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 // OEM revision +) +{ + #include <soc/intel/skylake/acpi/platform.asl> + + // global NVS and variables + #include <soc/intel/skylake/acpi/globalnvs.asl> + + // CPU + #include <cpu/intel/common/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + /* Image processing unit */ + #include <soc/intel/skylake/acpi/ipu.asl> + #include <soc/intel/skylake/acpi/systemagent.asl> + #include <soc/intel/skylake/acpi/pch.asl> + } + + // Dynamic Platform Thermal Framework + #include "acpi/dptf.asl" + } + + #include <southbridge/intel/common/acpi/sleepstates.asl> + + // Mainboard specific + #include "acpi/mainboard.asl" +} diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/gma-mainboard.ads b/src/mainboard/gigabyte/ga-z170x-gaming7/gma-mainboard.ads new file mode 100644 index 0000000..86a3a62 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/gma-mainboard.ads @@ -0,0 +1,32 @@ +-- +-- This file is part of the coreboot project. +-- +-- Copyright (C) 2018 Tristan Corrick <tristan(a)corrick.kiwi> +-- Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> +-- +-- This program is free software: you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation, either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (HDMI1, -- mainboard DVI port + HDMI3, -- mainboard HDMI port + Analog, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/gpio.h b/src/mainboard/gigabyte/ga-z170x-gaming7/gpio.h new file mode 100644 index 0000000..8417dee --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/gpio.h @@ -0,0 +1,235 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2020 Christoph Pomaska + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include <soc/gpe.h> +#include <soc/gpio.h> + +#ifndef __ACPI__ + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { + PAD_CFG_NF(GPD0, NONE, PWROK, NF1), + PAD_CFG_TERM_GPO(GPD1, 0, NONE, PWROK), + _PAD_CFG_STRUCT(GPD2, 0x00080500, 0x3c00), + PAD_CFG_NF(GPD3, UP_20K, PWROK, NF1), + PAD_CFG_NF(GPD4, NONE, PWROK, NF1), + PAD_CFG_NF(GPD5, NONE, PWROK, NF1), + PAD_CFG_NF(GPD6, NONE, PWROK, NF1), + PAD_CFG_TERM_GPO(GPD7, 1, NONE, PWROK), + PAD_CFG_NF(GPD8, NONE, PWROK, NF1), + PAD_CFG_NF(GPD9, NONE, PWROK, NF1), + PAD_CFG_NF(GPD10, NONE, PWROK, NF1), + PAD_CFG_NF(GPD11, NONE, PWROK, NF1), + PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A1, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_A2, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_A3, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_A4, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A8, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_A9, DN_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A10, DN_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_A11, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A12, NONE, DEEP, NF3), + PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A15, UP_20K, DEEP, NF1), + PAD_NC(GPP_A16, NONE), + PAD_NC(GPP_A17, NONE), + PAD_CFG_NF(GPP_A18, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_A19, NONE, PLTRST, NF1), + PAD_NC(GPP_A20, NONE), + PAD_CFG_TERM_GPO(GPP_A21, 1, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_A22, 1, NONE, DEEP), + _PAD_CFG_STRUCT(GPP_A23, 0x40100100, 0x0000), + PAD_CFG_TERM_GPO(GPP_B0, 0, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_B1, 0, NONE, DEEP), + PAD_NC(GPP_B2, NONE), + PAD_NC(GPP_B3, NONE), + PAD_CFG_TERM_GPO(GPP_B4, 0, NONE, PLTRST), + PAD_NC(GPP_B5, NONE), + PAD_NC(GPP_B6, NONE), + PAD_NC(GPP_B7, NONE), + PAD_NC(GPP_B8, NONE), + PAD_NC(GPP_B9, NONE), + PAD_NC(GPP_B10, NONE), + PAD_CFG_TERM_GPO(GPP_B11, 0, NONE, DEEP), + PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B14, DN_20K, PLTRST, NF1), + PAD_CFG_TERM_GPO(GPP_B15, 0, NONE, PLTRST), + PAD_NC(GPP_B16, NONE), + PAD_CFG_TERM_GPO(GPP_B17, 1, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_B18, 0, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_B19, 0, NONE, PLTRST), + PAD_CFG_NF(GPP_B20, DN_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_B21, DN_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_B22, DN_20K, PLTRST, NF1), + _PAD_CFG_STRUCT(GPP_B23, 0x84000a01, 0x1000), + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_C2, 1, NONE, DEEP), + PAD_CFG_NF(GPP_C3, DN_20K, DEEP, NF1), + PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_C5, 0, NONE, DEEP), + _PAD_CFG_STRUCT(GPP_C6, 0xfffffffd, 0xffffff00), + _PAD_CFG_STRUCT(GPP_C7, 0xfffffffd, 0xffffff00), + PAD_NC(GPP_C8, NONE), + PAD_NC(GPP_C9, NONE), + PAD_NC(GPP_C10, NONE), + PAD_NC(GPP_C11, NONE), + PAD_NC(GPP_C12, NONE), + PAD_NC(GPP_C13, NONE), + PAD_NC(GPP_C14, NONE), + PAD_NC(GPP_C15, NONE), + PAD_NC(GPP_C16, NONE), + PAD_NC(GPP_C17, NONE), + PAD_NC(GPP_C18, NONE), + PAD_CFG_TERM_GPO(GPP_C19, 0, NONE, PWROK), + PAD_CFG_TERM_GPO(GPP_C20, 0, NONE, PWROK), + PAD_CFG_TERM_GPO(GPP_C21, 0, NONE, PWROK), + _PAD_CFG_STRUCT(GPP_C22, 0x42840101, 0x0000), + PAD_NC(GPP_C23, NONE), + PAD_CFG_TERM_GPO(GPP_D0, 0, NONE, PWROK), + PAD_CFG_TERM_GPO(GPP_D1, 1, NONE, PWROK), + PAD_CFG_TERM_GPO(GPP_D2, 0, NONE, PWROK), + _PAD_CFG_STRUCT(GPP_D3, 0x82880101, 0x1000), + _PAD_CFG_STRUCT(GPP_D4, 0x42840101, 0x0000), + PAD_CFG_NF(GPP_D5, NONE, PLTRST, NF1), + PAD_CFG_TERM_GPO(GPP_D6, 0, NONE, PLTRST), + PAD_CFG_NF(GPP_D7, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_D8, NONE, PLTRST, NF1), + PAD_CFG_TERM_GPO(GPP_D9, 0, NONE, PWROK), + PAD_NC(GPP_D10, NONE), + PAD_NC(GPP_D11, NONE), + PAD_NC(GPP_D12, NONE), + PAD_NC(GPP_D13, NONE), + PAD_NC(GPP_D14, NONE), + PAD_NC(GPP_D15, NONE), + PAD_NC(GPP_D16, NONE), + PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D18, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D21, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_D22, NONE, PLTRST, NF1), + PAD_NC(GPP_D23, NONE), + PAD_CFG_NF(GPP_E0, UP_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_E1, UP_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_E2, UP_20K, PLTRST, NF1), + PAD_NC(GPP_E3, NONE), + PAD_NC(GPP_E4, NONE), + _PAD_CFG_STRUCT(GPP_E5, 0x04000601, 0x0000), + PAD_CFG_NF(GPP_E6, NONE, PWROK, NF1), + PAD_NC(GPP_E7, NONE), + PAD_CFG_NF(GPP_E8, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F0, UP_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_F1, UP_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_F2, UP_20K, PLTRST, NF1), + PAD_NC(GPP_F3, NONE), + PAD_NC(GPP_F4, NONE), + PAD_CFG_TERM_GPO(GPP_F5, 1, NONE, PLTRST), + PAD_CFG_NF(GPP_F6, NONE, PWROK, NF1), + PAD_NC(GPP_F7, NONE), + PAD_NC(GPP_F8, NONE), + PAD_NC(GPP_F9, NONE), + PAD_CFG_GPI(GPP_F10, NONE, PLTRST), + PAD_NC(GPP_F11, NONE), + _PAD_CFG_STRUCT(GPP_F12, 0x80900100, 0x0000), + _PAD_CFG_STRUCT(GPP_F13, 0x80100100, 0x0000), + _PAD_CFG_STRUCT(GPP_F14, 0x40900100, 0x0000), + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + PAD_NC(GPP_F17, NONE), + PAD_CFG_TERM_GPO(GPP_F18, 1, NONE, PLTRST), + PAD_CFG_NF(GPP_F19, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_F20, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_F21, NONE, PLTRST, NF1), + PAD_CFG_TERM_GPO(GPP_F22, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_F23, 1, NONE, PLTRST), + _PAD_CFG_STRUCT(GPP_G0, 0x84000101, 0x0000), + _PAD_CFG_STRUCT(GPP_G1, 0x84000101, 0x0000), + PAD_CFG_TERM_GPO(GPP_G2, 1, NONE, PLTRST), + PAD_NC(GPP_G3, NONE), + PAD_NC(GPP_G4, NONE), + PAD_CFG_TERM_GPO(GPP_G5, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G6, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G7, 1, NONE, DEEP), + PAD_CFG_NF(GPP_G8, NONE, DEEP, NF1), + PAD_CFG_GPI(GPP_G9, NONE, PLTRST), + PAD_CFG_GPI(GPP_G10, NONE, PLTRST), + PAD_CFG_NF(GPP_G11, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_G12, 1, NONE, PLTRST), + PAD_NC(GPP_G13, NONE), + PAD_CFG_TERM_GPO(GPP_G14, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G15, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G16, 0, DN_20K, PLTRST), + PAD_NC(GPP_G17, NONE), + PAD_CFG_TERM_GPO(GPP_G18, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G19, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G20, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G21, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G22, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_G23, 1, NONE, PLTRST), + PAD_NC(GPP_H0, NONE), + PAD_NC(GPP_H1, NONE), + PAD_NC(GPP_H2, NONE), + PAD_NC(GPP_H3, NONE), + PAD_NC(GPP_H4, NONE), + PAD_NC(GPP_H5, NONE), + PAD_NC(GPP_H6, NONE), + PAD_NC(GPP_H7, NONE), + PAD_NC(GPP_H8, NONE), + PAD_NC(GPP_H9, NONE), + PAD_NC(GPP_H10, NONE), + PAD_NC(GPP_H11, NONE), + PAD_CFG_TERM_GPO(GPP_H12, 0, NONE, DEEP), + _PAD_CFG_STRUCT(GPP_H13, 0x80100100, 0x0000), + _PAD_CFG_STRUCT(GPP_H14, 0x80100100, 0x0000), + _PAD_CFG_STRUCT(GPP_H15, 0x80100100, 0x0000), + PAD_CFG_TERM_GPO(GPP_H16, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_H17, 1, NONE, PLTRST), + PAD_NC(GPP_H18, NONE), + PAD_CFG_NF(GPP_H19, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_H20, NONE, PLTRST, NF1), + PAD_NC(GPP_H21, NONE), + PAD_NC(GPP_H22, NONE), + PAD_CFG_TERM_GPO(GPP_H23, 0, NONE, DEEP), + PAD_CFG_NF(GPP_I0, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I1, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I2, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I3, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I4, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I5, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I6, DN_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_I7, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I8, DN_20K, PLTRST, NF1), + PAD_CFG_NF(GPP_I9, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I10, DN_20K, PLTRST, NF1), +}; + +#endif + +#endif + diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/hda_verb.c b/src/mainboard/gigabyte/ga-z170x-gaming7/hda_verb.c new file mode 100644 index 0000000..940c8fb --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/hda_verb.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Christoph Pomaska + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef HDA_VERB_H +#define HDA_VERB_H + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* Creative, Recon3Di */ + 0x11020011, /* Vendor ID */ + 0x1458a036, /* Subsystem ID */ + 11, /* Number of entries */ + AZALIA_SUBVENDOR(0, 0x1458a036), + AZALIA_PIN_CFG(0, 0x0b, 0x01014010), + AZALIA_PIN_CFG(0, 0x0c, 0x014580f0), + AZALIA_PIN_CFG(0, 0x0d, 0x014570f0), + AZALIA_PIN_CFG(0, 0x0e, 0x01c530f0), + AZALIA_PIN_CFG(0, 0x0f, 0x0221401f), + AZALIA_PIN_CFG(0, 0x10, 0x02216011), + AZALIA_PIN_CFG(0, 0x11, 0x02012014), + AZALIA_PIN_CFG(0, 0x12, 0x37a791f0), + AZALIA_PIN_CFG(0, 0x13, 0x908700f0), + AZALIA_PIN_CFG(0, 0x18, 0x500000f0), + /* Intel, SkylakeHDMI */ + 0x80862809, /* Vendor ID */ + 0x80860101, /* Subsystem ID */ + 4, /* Number of entries */ + AZALIA_SUBVENDOR(2, 0x80860101), + AZALIA_PIN_CFG(2, 0x05, 0x18560010), + AZALIA_PIN_CFG(2, 0x06, 0x18560010), + AZALIA_PIN_CFG(2, 0x07, 0x18560010), +}; + +const u32 pc_beep_verbs[] = {}; + +AZALIA_ARRAY_SIZES; + +#endif diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/include/gpio.h b/src/mainboard/gigabyte/ga-z170x-gaming7/include/gpio.h new file mode 100644 index 0000000..0b33078 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/include/gpio.h @@ -0,0 +1,508 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef _PCH_GPIO_H +#define _PCH_GPIO_H + +#include <soc/gpe.h> +#include <soc/gpio.h> + +/* Pad configuration in ramstage */ +static const struct pad_config gpio_table[] = { + /* ------- GPIO Group GPP_A ------- */ + /* GPP_A0 - RCIN# */ + PAD_CFG_NF_BUF_TRIG(GPP_A0, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_A1 - LAD0 */ + PAD_CFG_NF_BUF_TRIG(GPP_A1, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A2 - LAD1 */ + PAD_CFG_NF_BUF_TRIG(GPP_A2, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A3 - LAD2 */ + PAD_CFG_NF_BUF_TRIG(GPP_A3, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A4 - LAD3 */ + PAD_CFG_NF_BUF_TRIG(GPP_A4, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A5 - LFRAME# */ + PAD_CFG_NF_BUF_TRIG(GPP_A5, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_A6 - SERIRQ */ + PAD_CFG_NF_BUF_TRIG(GPP_A6, NONE, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A7 - GPIO */ + PAD_CFG_GPI_INT(GPP_A7, NONE, PLTRST, OFF), + /* GPP_A8 - CLKRUN# */ + PAD_CFG_NF_BUF_TRIG(GPP_A8, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_A9 - CLKOUT_LPC0 */ + PAD_CFG_NF_BUF_TRIG(GPP_A9, 20K_PD, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_A10 - CLKOUT_LPC1 */ + PAD_CFG_NF_BUF_TRIG(GPP_A10, 20K_PD, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_A11 - GPIO */ + PAD_CFG_GPI_INT(GPP_A11, NONE, PLTRST, OFF), + /* GPP_A12 - GPIO */ + PAD_CFG_GPI_INT(GPP_A12, NONE, PLTRST, OFF), + /* GPP_A13 - SUSWARN#/SUSPWRDNACK */ + PAD_CFG_NF_BUF_TRIG(GPP_A13, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_A14 - SUS_STAT# */ + PAD_CFG_NF_BUF_TRIG(GPP_A14, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_A15 - SUS_ACK# */ + PAD_CFG_NF_BUF_TRIG(GPP_A15, 20K_PU, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_A16 - GPIO */ + PAD_CFG_GPI_INT(GPP_A16, NONE, PLTRST, OFF), + /* GPP_A17 - GPIO */ + PAD_CFG_GPI_INT(GPP_A17, NONE, PLTRST, OFF), + /* GPP_A18 - GPIO */ + PAD_CFG_GPI_INT(GPP_A18, NONE, PLTRST, OFF), + /* GPP_A19 - GPIO */ + PAD_CFG_GPI_INT(GPP_A19, NONE, PLTRST, OFF), + /* GPP_A20 - GPIO */ + PAD_CFG_GPI_INT(GPP_A20, NONE, PLTRST, OFF), + /* GPP_A21 - GPIO */ + PAD_CFG_GPI_INT(GPP_A21, NONE, PLTRST, OFF), + /* GPP_A22 - GPIO */ + PAD_CFG_GPI_INT(GPP_A22, NONE, PLTRST, OFF), + /* GPP_A23 - GPIO */ + PAD_CFG_GPI_INT(GPP_A23, NONE, PLTRST, OFF), + + /* ------- GPIO Group GPP_B ------- */ + /* GPP_B0 - GPIO */ + PAD_CFG_GPI_INT(GPP_B0, NONE, PLTRST, OFF), + /* GPP_B1 - GPIO */ + PAD_CFG_GPI_INT(GPP_B1, NONE, PLTRST, OFF), + /* GPP_B2 - GPIO */ + PAD_CFG_GPI_INT(GPP_B2, NONE, PLTRST, OFF), + /* GPP_B3 - GPIO */ + PAD_CFG_GPO(GPP_B3, 1, DEEP), + /* GPP_B4 - CPU_GP3 */ + PAD_CFG_NF_BUF_TRIG(GPP_B4, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_B5 - GPIO */ + PAD_CFG_GPI_INT(GPP_B5, NONE, PLTRST, OFF), + /* GPP_B6 - GPIO */ + PAD_CFG_GPI_INT(GPP_B6, NONE, PLTRST, OFF), + /* GPP_B7 - NC */ + PAD_NC(GPP_B7, NONE), + /* GPP_B8 - GPIO */ + PAD_CFG_GPI_INT(GPP_B8, 5K_PU, PLTRST, OFF), + /* GPP_B9 - GPIO */ + PAD_CFG_GPI_INT(GPP_B9, NONE, PLTRST, OFF), + /* GPP_B10 - GPIO */ + PAD_CFG_GPI_INT(GPP_B10, NONE, PLTRST, OFF), + /* GPP_B11 - GPIO */ + _PAD_CFG_STRUCT(GPP_B11, + PAD_FUNC(GPIO) | PAD_RESET(PWROK) | + PAD_CFG0_TRIG_OFF | PAD_CFG0_RX_POL_NONE | + PAD_BUF(NO_DISABLE), + PAD_PULL(NONE)), + /* GPP_B12 - SLP_S0# */ + PAD_CFG_NF_BUF_TRIG(GPP_B12, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_B13 - PLTRST# */ + PAD_CFG_NF_BUF_TRIG(GPP_B13, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_B14 - SPKR */ + PAD_CFG_NF_BUF_TRIG(GPP_B14, 20K_PD, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_B15 - GPIO */ + PAD_CFG_GPI_INT(GPP_B15, NONE, PLTRST, OFF), + /* GPP_B16 - GPIO */ + PAD_CFG_GPI_INT(GPP_B16, NONE, PLTRST, OFF), + /* GPP_B17 - GPIO */ + PAD_CFG_GPO(GPP_B17, 1, DEEP), + /* GPP_B18 - GPIO */ + PAD_CFG_GPI_INT(GPP_B18, NONE, PLTRST, OFF), + /* GPP_B19 - GPIO */ + PAD_CFG_GPI_INT(GPP_B19, NONE, PLTRST, OFF), + /* GPP_B20 - GPIO */ + PAD_CFG_GPI_INT(GPP_B20, NONE, PLTRST, OFF), + /* GPP_B21 - GPIO */ + PAD_CFG_GPI_INT(GPP_B21, NONE, PLTRST, OFF), + /* GPP_B22 - GPIO */ + PAD_CFG_GPI_INT(GPP_B22, NONE, PLTRST, OFF), + /* GPP_B23 - PCHHOT# */ + _PAD_CFG_STRUCT(GPP_B23, + PAD_FUNC(NF2) | PAD_RESET(PLTRST) | + PAD_CFG0_TRIG_OFF | PAD_CFG0_RX_POL_NONE | + PAD_BUF(RX_DISABLE) | 1, + PAD_PULL(20K_PD)), + + /* ------- GPIO Group GPP_C ------- */ + /* GPP_C0 - SMBCLK */ + PAD_CFG_NF_BUF_TRIG(GPP_C0, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_C1 - SMBDATA */ + PAD_CFG_NF_BUF_TRIG(GPP_C1, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_C2 - GPIO */ + PAD_CFG_GPO(GPP_C2, 1, DEEP), + /* GPP_C3 - SML0CLK */ + PAD_CFG_NF_BUF_TRIG(GPP_C3, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_C4 - SML0DATA */ + PAD_CFG_NF_BUF_TRIG(GPP_C4, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_C5 - GPIO */ + PAD_CFG_GPI_INT(GPP_C5, NONE, PLTRST, OFF), + /* GPP_C6 - RESERVED */ + /* GPP_C7 - RESERVED */ + /* GPP_C8 - UART0_RXD */ + PAD_CFG_NF_BUF_TRIG(GPP_C8, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_C9 - UART0_TXD */ + PAD_CFG_NF_BUF_TRIG(GPP_C9, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_C10 - UART0_RTS# */ + PAD_CFG_NF_BUF_TRIG(GPP_C10, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_C11 - UART0_CTS# */ + PAD_CFG_NF_BUF_TRIG(GPP_C11, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_C12 - GPIO */ + PAD_CFG_GPI_INT(GPP_C12, NONE, PLTRST, OFF), + /* GPP_C13 - GPIO */ + PAD_CFG_GPI_INT(GPP_C13, NONE, PLTRST, OFF), + /* GPP_C14 - GPIO */ + PAD_CFG_GPI_INT(GPP_C14, NONE, PLTRST, OFF), + /* GPP_C15 - GPIO */ + PAD_CFG_GPI_INT(GPP_C15, NONE, PLTRST, OFF), + /* GPP_C16 - GPIO */ + PAD_CFG_GPI_INT(GPP_C16, NONE, PLTRST, OFF), + /* GPP_C17 - GPIO */ + PAD_CFG_GPI_INT(GPP_C17, NONE, PLTRST, OFF), + /* GPP_C18 - GPIO */ + PAD_CFG_GPI_INT(GPP_C18, NONE, PLTRST, OFF), + /* GPP_C19 - GPIO */ + PAD_CFG_GPI_INT(GPP_C19, NONE, PLTRST, OFF), + /* GPP_C20 - UART2_RXD */ + PAD_CFG_NF_BUF_TRIG(GPP_C20, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_C21 - UART2_TXD */ + PAD_CFG_NF_BUF_TRIG(GPP_C21, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_C22 - UART2_RTS# */ + PAD_CFG_NF_BUF_TRIG(GPP_C22, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_C23 - GPIO */ + PAD_CFG_GPI_SCI(GPP_C23, NONE, DEEP, LEVEL, YES), + + /* ------- GPIO Group GPP_D ------- */ + /* GPP_D0 - GPIO */ + PAD_CFG_GPI_INT(GPP_D0, NONE, PLTRST, OFF), + /* GPP_D1 - GPIO */ + PAD_CFG_GPI_INT(GPP_D1, NONE, PLTRST, OFF), + /* GPP_D2 - GPIO */ + PAD_CFG_GPI_INT(GPP_D2, NONE, PLTRST, OFF), + /* GPP_D3 - GPIO */ + PAD_CFG_GPI_INT(GPP_D3, NONE, PLTRST, OFF), + /* GPP_D4 - GPIO */ + PAD_CFG_GPI_INT(GPP_D4, NONE, PLTRST, OFF), + /* GPP_D5 - I2S_SFRM */ + PAD_CFG_NF_BUF_TRIG(GPP_D5, NONE, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_D6 - I2S_TXD */ + PAD_CFG_NF_BUF_TRIG(GPP_D6, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_D7 - I2S_RXD */ + PAD_CFG_NF_BUF_TRIG(GPP_D7, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_D8 - I2S_SCLK */ + PAD_CFG_NF_BUF_TRIG(GPP_D8, NONE, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_D9 - GPIO */ + PAD_CFG_GPI_INT(GPP_D9, NONE, PLTRST, OFF), + /* GPP_D10 - GPIO */ + PAD_CFG_GPI_INT(GPP_D10, NONE, PLTRST, OFF), + /* GPP_D11 - GPIO */ + PAD_CFG_GPI_INT(GPP_D11, NONE, PLTRST, OFF), + /* GPP_D12 - GPIO */ + PAD_CFG_GPI_INT(GPP_D12, NONE, PLTRST, OFF), + /* GPP_D13 - GPIO */ + PAD_CFG_GPI_INT(GPP_D13, NONE, PLTRST, OFF), + /* GPP_D14 - GPIO */ + PAD_CFG_GPI_INT(GPP_D14, NONE, PLTRST, OFF), + /* GPP_D15 - GPIO */ + PAD_CFG_GPI_INT(GPP_D15, NONE, PLTRST, OFF), + /* GPP_D16 - GPIO */ + PAD_CFG_GPI_INT(GPP_D16, NONE, PLTRST, OFF), + /* GPP_D17 - GPIO */ + PAD_CFG_GPI_INT(GPP_D17, NONE, PLTRST, OFF), + /* GPP_D18 - GPIO */ + PAD_CFG_GPI_INT(GPP_D18, NONE, PLTRST, OFF), + /* GPP_D19 - DMIC_CLK0 */ + PAD_CFG_NF_BUF_TRIG(GPP_D19, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_D20 - DMIC_DATA0 */ + PAD_CFG_NF_BUF_TRIG(GPP_D20, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_D21 - GPIO */ + PAD_CFG_GPI_INT(GPP_D21, NONE, PLTRST, OFF), + /* GPP_D22 - GPIO */ + PAD_CFG_GPI_INT(GPP_D22, NONE, PLTRST, OFF), + /* GPP_D23 - GPIO */ + PAD_CFG_GPI_INT(GPP_D23, NONE, PLTRST, OFF), + + /* ------- GPIO Group GPP_E ------- */ + /* GPP_E0 - SATAXPCIE0 */ + PAD_CFG_NF_BUF_TRIG(GPP_E0, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E1 - SATAXPCIE1 */ + PAD_CFG_NF_BUF_TRIG(GPP_E1, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E2 - SATAXPCIE2 */ + PAD_CFG_NF_BUF_TRIG(GPP_E2, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E3 - CPU_GP0 */ + PAD_CFG_NF_BUF_TRIG(GPP_E3, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E4 - SATA_DEVSLP0 */ + PAD_CFG_NF_BUF_TRIG(GPP_E4, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E5 - SATA_DEVSLP1 */ + PAD_CFG_NF_BUF_TRIG(GPP_E5, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E6 - SATA_DEVSLP2 */ + PAD_CFG_NF_BUF_TRIG(GPP_E6, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_E7 - GPIO */ + PAD_CFG_GPI_INT(GPP_E7, NONE, PLTRST, OFF), + /* GPP_E8 - SATA_LED# */ + PAD_CFG_NF_BUF_TRIG(GPP_E8, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_E9 - USB_OC0# */ + PAD_CFG_NF_BUF_TRIG(GPP_E9, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_E10 - USB_OC1# */ + PAD_CFG_NF_BUF_TRIG(GPP_E10, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_E11 - USB_OC2# */ + PAD_CFG_NF_BUF_TRIG(GPP_E11, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_E12 - USB_OC3# */ + PAD_CFG_NF_BUF_TRIG(GPP_E12, NONE, DEEP, NF1, TX_DISABLE, OFF), + + /* ------- GPIO Group GPP_F ------- */ + /* GPP_F0 - GPIO */ + PAD_CFG_GPI_INT(GPP_F0, NONE, PLTRST, OFF), + /* GPP_F1 - SATAXPCIE4 */ + PAD_CFG_NF_BUF_TRIG(GPP_F1, 20K_PU, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_F2 - GPIO */ + PAD_NC(GPP_F2, NONE), + /* GPP_F3 - GPIO */ + PAD_CFG_GPI_INT(GPP_F3, NONE, PLTRST, OFF), + /* GPP_F4 - GPIO */ + PAD_CFG_GPI_INT(GPP_F4, NONE, PLTRST, OFF), + /* GPP_F5 - GPIO */ + PAD_CFG_GPI_INT(GPP_F5, NONE, PLTRST, OFF), + /* GPP_F6 - GPIO */ + PAD_CFG_GPI_INT(GPP_F6, NONE, PLTRST, OFF), + /* GPP_F7 - GPIO */ + PAD_CFG_GPI_INT(GPP_F7, NONE, PLTRST, OFF), + /* GPP_F8 - GPIO */ + PAD_CFG_GPI_INT(GPP_F8, NONE, PLTRST, OFF), + /* GPP_F9 - GPIO */ + PAD_CFG_GPI_INT(GPP_F9, NONE, PLTRST, OFF), + /* GPP_F10 - GPIO */ + PAD_CFG_GPI_APIC(GPP_F10, NONE, PLTRST), + /* GPP_F11 - GPIO */ + PAD_CFG_GPI_INT(GPP_F11, NONE, PLTRST, OFF), + /* GPP_F12 - GPIO */ + PAD_CFG_GPI_APIC_INVERT(GPP_F12, NONE, PLTRST), + /* GPP_F13 - GPIO */ + PAD_CFG_GPI_APIC(GPP_F13, NONE, PLTRST), + /* GPP_F14 - GPIO */ + PAD_CFG_GPI_APIC_INVERT(GPP_F14, NONE, DEEP), + /* GPP_F15 - USB_OC4# */ + PAD_CFG_NF_BUF_TRIG(GPP_F15, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_F16 - USB_OC5# */ + PAD_CFG_NF_BUF_TRIG(GPP_F16, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_F17 - USB_OC6# */ + PAD_CFG_NF_BUF_TRIG(GPP_F17, NONE, DEEP, NF1, TX_DISABLE, OFF), + /* GPP_F18 - GPIO */ + PAD_CFG_GPO(GPP_F18, 1, PLTRST), + /* GPP_F19 - GPIO */ + PAD_CFG_GPI_INT(GPP_F19, NONE, PLTRST, OFF), + /* GPP_F20 - GPIO */ + PAD_CFG_GPI_INT(GPP_F20, NONE, PLTRST, OFF), + /* GPP_F21 - GPIO */ + PAD_CFG_GPI_INT(GPP_F21, NONE, PLTRST, OFF), + /* GPP_F22 - GPIO */ + PAD_CFG_GPI_INT(GPP_F22, NONE, PLTRST, OFF), + /* GPP_F23 - GPIO */ + PAD_CFG_GPI_INT(GPP_F23, NONE, PLTRST, OFF), + + /* ------- GPIO Group GPP_G ------- */ + /* GPP_G0 - GPIO */ + PAD_CFG_GPI_INT(GPP_G0, NONE, PWROK, OFF), + /* GPP_G1 - GPIO */ + PAD_CFG_GPI_INT(GPP_G1, NONE, PWROK, OFF), + /* GPP_G2 - GPIO */ + PAD_CFG_GPI_INT(GPP_G2, NONE, PWROK, OFF), + /* GPP_G3 - GPIO */ + PAD_CFG_GPI_INT(GPP_G3, NONE, PWROK, OFF), + /* GPP_G4 - GPIO */ + PAD_CFG_GPO(GPP_G4, 0, DEEP), + /* GPP_G5 - GPIO */ + PAD_CFG_GPI_INT(GPP_G5, NONE, PWROK, OFF), + /* GPP_G6 - GPIO */ + _PAD_CFG_STRUCT(GPP_G6, + PAD_FUNC(GPIO) | PAD_RESET(PWROK) | + PAD_CFG0_TRIG_LEVEL | PAD_CFG0_RX_POL_YES | + PAD_BUF(TX_DISABLE), + PAD_PULL(NONE)), + /* GPP_G7 - GPIO */ + PAD_CFG_GPI_INT(GPP_G7, NONE, PWROK, OFF), + /* GPP_G8 - GPIO */ + PAD_CFG_GPI_INT(GPP_G8, NONE, PLTRST, OFF), + /* GPP_G9 - GPIO */ + PAD_CFG_GPI_INT(GPP_G9, NONE, PLTRST, OFF), + /* GPP_G10 - GPIO */ + PAD_CFG_GPI_INT(GPP_G10, NONE, PLTRST, OFF), + /* GPP_G11 - GPIO */ + PAD_CFG_GPI_INT(GPP_G11, NONE, PLTRST, OFF), + /* GPP_G12 - GPIO */ + _PAD_CFG_STRUCT(GPP_G12, + PAD_FUNC(GPIO) | PAD_RESET(PLTRST) | + PAD_CFG0_TRIG_LEVEL | PAD_CFG0_RX_POL_YES | + PAD_BUF(TX_DISABLE), + PAD_PULL(NONE)), + /* GPP_G13 - GPIO */ + PAD_CFG_GPO(GPP_G13, 1, PLTRST), + /* GPP_G14 - GPIO */ + _PAD_CFG_STRUCT(GPP_G14, + PAD_FUNC(GPIO) | PAD_RESET(PLTRST) | + PAD_CFG0_TRIG_LEVEL | PAD_CFG0_RX_POL_YES | + PAD_BUF(TX_DISABLE), + PAD_PULL(NONE)), + /* GPP_G15 - GPIO */ + PAD_CFG_GPO(GPP_G15, 0, PLTRST), + /* GPP_G16 - GPIO */ + PAD_CFG_TERM_GPO(GPP_G16, 1, 20K_PD, PLTRST), + /* GPP_G17 - GPIO */ + PAD_CFG_GPI_INT(GPP_G17, NONE, PLTRST, OFF), + /* GPP_G18 - GPIO */ + PAD_CFG_GPI_APIC(GPP_G18, NONE, PLTRST), + /* GPP_G19 - SMI# */ + PAD_CFG_NF_BUF_TRIG(GPP_G19, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_G20 - GPIO */ + PAD_CFG_GPI_INT(GPP_G20, NONE, PLTRST, OFF), + /* GPP_G21 - GPIO */ + PAD_CFG_GPI_INT(GPP_G21, NONE, PLTRST, OFF), + /* GPP_G22 - GPIO */ + PAD_CFG_GPI_INT(GPP_G22, NONE, PLTRST, OFF), + /* GPP_G23 - GPIO */ + PAD_CFG_GPI_INT(GPP_G23, NONE, PLTRST, OFF), + + /* ------- GPIO Group GPP_H ------- */ + /* GPP_H0 - GPIO */ + PAD_CFG_GPI_INT(GPP_H0, NONE, PLTRST, OFF), + /* GPP_H1 - GPIO */ + PAD_NC(GPP_H1, NONE), + /* GPP_H2 - GPIO */ + PAD_CFG_GPI_INT(GPP_H2, NONE, PLTRST, OFF), + /* GPP_H3 - GPIO */ + PAD_CFG_GPI_INT(GPP_H3, NONE, PLTRST, OFF), + /* GPP_H4 - GPIO */ + PAD_CFG_GPI_INT(GPP_H4, NONE, PLTRST, OFF), + /* GPP_H5 - GPIO */ + PAD_CFG_GPI_INT(GPP_H5, NONE, PLTRST, OFF), + /* GPP_H6 - GPIO */ + PAD_CFG_GPI_INT(GPP_H6, NONE, PLTRST, OFF), + /* GPP_H7 - GPIO */ + PAD_CFG_GPI_INT(GPP_H7, NONE, PLTRST, OFF), + /* GPP_H8 - GPIO */ + PAD_CFG_GPI_INT(GPP_H8, NONE, PLTRST, OFF), + /* GPP_H9 - GPIO */ + PAD_CFG_GPI_INT(GPP_H9, NONE, PLTRST, OFF), + /* GPP_H10 - GPIO */ + PAD_CFG_GPI_INT(GPP_H10, NONE, PLTRST, OFF), + /* GPP_H11 - GPIO */ + PAD_CFG_GPI_INT(GPP_H11, NONE, PLTRST, OFF), + /* GPP_H12 - GPIO */ + PAD_CFG_GPI_INT(GPP_H12, NONE, PLTRST, OFF), + /* GPP_H13 - GPIO */ + PAD_CFG_GPI_APIC(GPP_H13, NONE, PLTRST), + /* GPP_H14 - GPIO */ + PAD_CFG_GPI_APIC(GPP_H14, NONE, PLTRST), + /* GPP_H15 - GPIO */ + PAD_CFG_GPI_APIC(GPP_H15, NONE, PLTRST), + /* GPP_H16 - GPIO */ + PAD_CFG_GPI(GPP_H16, NONE, PLTRST), + /* GPP_H17 - GPIO */ + PAD_CFG_GPO(GPP_H17, 1, PLTRST), + /* GPP_H18 - GPIO */ + PAD_CFG_GPI_INT(GPP_H18, NONE, PLTRST, OFF), + /* GPP_H19 - GPIO */ + PAD_CFG_GPI_INT(GPP_H19, NONE, PLTRST, OFF), + /* GPP_H20 - GPIO */ + PAD_CFG_GPI_INT(GPP_H20, NONE, PLTRST, OFF), + /* GPP_H21 - GPIO */ + PAD_CFG_GPI_INT(GPP_H21, NONE, PLTRST, OFF), + /* GPP_H22 - GPIO */ + PAD_CFG_GPI_INT(GPP_H22, NONE, PLTRST, OFF), + /* GPP_H23 - GPIO */ + PAD_CFG_GPI_INT(GPP_H23, NONE, PWROK, OFF), + + /* -------- GPIO Group GPD -------- */ + /* GPD0 - GPIO */ + PAD_CFG_GPI_INT(GPD0, NONE, PLTRST, OFF), + /* GPD1 - GPIO */ + PAD_CFG_GPO(GPD1, 0, PWROK), + /* GPD2 - LAN_WAKE# */ + PAD_CFG_NF_BUF_TRIG(GPD2, NATIVE, PWROK, NF1, RX_DISABLE, LEVEL), + /* GPD3 - PWRBTN# */ + PAD_CFG_NF_BUF_TRIG(GPD3, 20K_PU, PWROK, NF1, TX_DISABLE, OFF), + /* GPD4 - SLP_S3# */ + PAD_CFG_NF_BUF_TRIG(GPD4, NONE, PWROK, NF1, RX_DISABLE, OFF), + /* GPD5 - SLP_S4# */ + PAD_CFG_NF_BUF_TRIG(GPD5, NONE, PWROK, NF1, RX_DISABLE, OFF), + /* GPD6 - GPIO */ + PAD_CFG_GPI_INT(GPD6, NONE, PLTRST, OFF), + /* GPD7 - GPIO */ + _PAD_CFG_STRUCT(GPD7, + PAD_FUNC(GPIO) | PAD_RESET(PLTRST) | + PAD_CFG0_TRIG_OFF | PAD_CFG0_RX_POL_NONE | + PAD_BUF(TX_DISABLE) | 1, + PAD_PULL(NONE)), + /* GPD8 - SUSCLK */ + PAD_CFG_NF_BUF_TRIG(GPD8, NONE, PWROK, NF1, RX_DISABLE, OFF), + /* GPD9 - SLP_WLAN# */ + PAD_CFG_NF_BUF_TRIG(GPD9, NONE, PWROK, NF1, RX_DISABLE, OFF), + /* GPD10 - SLP_S5# */ + PAD_CFG_NF_BUF_TRIG(GPD10, NONE, PWROK, NF1, RX_DISABLE, OFF), + /* GPD11 - GPIO */ + PAD_CFG_GPO(GPD11, 0, PWROK), + + /* ------- GPIO Group GPP_I ------- */ + /* GPP_I0 - DDPB_HPD0 */ + PAD_CFG_NF_BUF_TRIG(GPP_I0, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I1 - DDPC_HPD1 */ + PAD_CFG_NF_BUF_TRIG(GPP_I1, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I2 - DDPD_HPD2 */ + PAD_CFG_NF_BUF_TRIG(GPP_I2, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I3 - DDPE_HPD3 */ + PAD_CFG_NF_BUF_TRIG(GPP_I3, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I4 - GPIO */ + PAD_CFG_GPI_INT(GPP_I4, NONE, PLTRST, OFF), + /* GPP_I5 - DDPB_CTRLCLK */ + PAD_CFG_NF_BUF_TRIG(GPP_I5, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I6 - DDPB_CTRLDATA */ + PAD_CFG_NF_BUF_TRIG(GPP_I6, 20K_PD, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I7 - DDPC_CTRLCLK */ + PAD_CFG_NF_BUF_TRIG(GPP_I7, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I8 - DDPC_CTRLDATA */ + PAD_CFG_NF_BUF_TRIG(GPP_I8, 20K_PD, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I9 - DDPD_CTRLCLK */ + PAD_CFG_NF_BUF_TRIG(GPP_I9, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_I10 - DDPD_CTRLDATA */ + PAD_CFG_NF_BUF_TRIG(GPP_I10, 20K_PD, PLTRST, NF1, TX_DISABLE, OFF), +}; + +/* Early pad configuration in romstage */ +static const struct pad_config early_gpio_table[] = { + /* ------- GPIO Group GPP_A ------- */ + /* GPP_A0 - RCIN# */ + PAD_CFG_NF_BUF_TRIG(GPP_A0, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_A1 - LAD0 */ + PAD_CFG_NF_BUF_TRIG(GPP_A1, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A2 - LAD1 */ + PAD_CFG_NF_BUF_TRIG(GPP_A2, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A3 - LAD2 */ + PAD_CFG_NF_BUF_TRIG(GPP_A3, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A4 - LAD3 */ + PAD_CFG_NF_BUF_TRIG(GPP_A4, 20K_PU, PLTRST, NF1, NO_DISABLE, OFF), + /* GPP_A5 - LFRAME# */ + PAD_CFG_NF_BUF_TRIG(GPP_A5, NONE, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_A6 - SERIRQ */ + PAD_CFG_NF_BUF_TRIG(GPP_A6, NONE, PLTRST, NF1, NO_DISABLE, OFF), + + /* GPP_A8 - CLKRUN# */ + PAD_CFG_NF_BUF_TRIG(GPP_A8, NONE, PLTRST, NF1, TX_DISABLE, OFF), + /* GPP_A9 - CLKOUT_LPC0 */ + PAD_CFG_NF_BUF_TRIG(GPP_A9, 20K_PD, PLTRST, NF1, RX_DISABLE, OFF), + /* GPP_A10 - CLKOUT_LPC1 */ + PAD_CFG_NF_BUF_TRIG(GPP_A10, 20K_PD, PLTRST, NF1, RX_DISABLE, OFF), + + /* GPP_A13 - SUSWARN#/SUSPWRDNACK */ + PAD_CFG_NF_BUF_TRIG(GPP_A13, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_A14 - SUS_STAT# */ + PAD_CFG_NF_BUF_TRIG(GPP_A14, NONE, DEEP, NF1, RX_DISABLE, OFF), + /* GPP_A15 - SUS_ACK# */ + PAD_CFG_NF_BUF_TRIG(GPP_A15, 20K_PU, DEEP, NF1, TX_DISABLE, OFF), +}; + +#endif diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/mainboard.c b/src/mainboard/gigabyte/ga-z170x-gaming7/mainboard.c new file mode 100644 index 0000000..4c1c6cd --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/mainboard.c @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Tristan Corrick <tristan(a)corrick.kiwi> + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <drivers/intel/gma/int15.h> + +static void mainboard_enable(struct device *dev) +{ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_NONE, + GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/ramstage.c b/src/mainboard/gigabyte/ga-z170x-gaming7/ramstage.c new file mode 100644 index 0000000..a247b72 --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/ramstage.c @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corporation + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/ramstage.h> +#include "include/gpio.h" + +void mainboard_silicon_init_params(FSP_SIL_UPD *params) +{ + /* Configure pads prior to SiliconInit() in case there's any + * dependencies during hardware initialization. */ + gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); + + params->CdClock = 3; +} diff --git a/src/mainboard/gigabyte/ga-z170x-gaming7/romstage.c b/src/mainboard/gigabyte/ga-z170x-gaming7/romstage.c new file mode 100644 index 0000000..0c0371b --- /dev/null +++ b/src/mainboard/gigabyte/ga-z170x-gaming7/romstage.c @@ -0,0 +1,66 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corporation. + * Copyright (C) 2019 Maxim Polyakov <max.senia.poliak(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/romstage.h> +#include <string.h> +#include <spd_bin.h> + +static void mainboard_fill_rcomp_res_data(void *rcomp_ptr) +{ + /* Rcomp resistor */ + const u16 RcompResistor[3] = { 200, 81, 162 }; + memcpy(rcomp_ptr, RcompResistor, + sizeof(RcompResistor)); +} + +static void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr) +{ + /* Rcomp target */ + static const u16 RcompTarget[5] = { + 100, 40, 40, 23, 40 }; + memcpy(rcomp_strength_ptr, RcompTarget, sizeof(RcompTarget)); +} + +void mainboard_memory_init_params(FSPM_UPD *mupd) +{ + FSP_M_CONFIG *mem_cfg; + struct spd_block blk = { + .addr_map = { 0x50, 0x51, 0x52, 0x53, }, + }; + + mem_cfg = &mupd->FspmConfig; + mainboard_fill_dq_map_data(&mem_cfg->DqByteMapCh0, + &mem_cfg->DqByteMapCh1); + mainboard_fill_dqs_map_data(&mem_cfg->DqsMapCpu2DramCh0, + &mem_cfg->DqsMapCpu2DramCh1); + mainboard_fill_rcomp_res_data(&mem_cfg->RcompResistor); + mainboard_fill_rcomp_strength_data(&mem_cfg->RcompTarget); + + mem_cfg->DqPinsInterleaved = 1; + get_spd_smbus(&blk); + mem_cfg->MemorySpdDataLen = blk.len; + mem_cfg->MemorySpdPtr00 = (uintptr_t)blk.spd_array[0]; + mem_cfg->MemorySpdPtr10 = (uintptr_t)blk.spd_array[2]; + mem_cfg->MemorySpdPtr01 = (uintptr_t)blk.spd_array[1]; + mem_cfg->MemorySpdPtr11 = (uintptr_t)blk.spd_array[3]; + dump_spd_info(&blk); + + /* use virtual channel 1 for the dmi interface of the PCH */ + mupd->FspmTestConfig.DmiVc1 = 1; + + /* desktop type */ + mem_cfg->UserBd = BOARD_TYPE_DESKTOP; +} -- To view, visit https://review.coreboot.org/c/coreboot/+/38920 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ib2c69bddd22cbd8f797dbb57370a4d8e5afa63bc Gerrit-Change-Number: 38920 Gerrit-PatchSet: 1 Gerrit-Owner: Christoph Pomaska <github(a)slrie.de> Gerrit-MessageType: newchange

6 55

Change in coreboot[master]: [WIP]cpu/x86/cache: CLFLUSH programs to memory before running
by Arthur Heymans (Code Review) 13 Mar '23

13 Mar '23

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37196 ) Change subject: [WIP]cpu/x86/cache: CLFLUSH programs to memory before running ...................................................................... [WIP]cpu/x86/cache: CLFLUSH programs to memory before running When cbmem is initialized in romstage and postcar placed in the stage cache + cbmem where it is run, the assumption is made that this are all in UC memory such that calling invd in postcar is ok. For performance reasons (e.g. postcar decompression) it is desirable to cache cbmem and the stage cache during romstage. Another reason is that AGESA sets up MTRR during romstage to cache all dram, which is currently worked around by using additional MTRR to make that UC. TODO be nice to reviewers and spit some parts off. UNTESTED Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b Signed-off-by: Arthur Heymans <arthur(a)aheymans.xyz> --- M src/arch/x86/postcar_loader.c M src/cpu/x86/cache/Makefile.inc M src/cpu/x86/cache/cache.c M src/include/cpu/x86/cache.h 4 files changed, 68 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/96/37196/1 diff --git a/src/arch/x86/postcar_loader.c b/src/arch/x86/postcar_loader.c index b53cbf8..53ab4f9 100644 --- a/src/arch/x86/postcar_loader.c +++ b/src/arch/x86/postcar_loader.c @@ -208,6 +208,21 @@ MTRR_TYPE_WRBACK); } +/* + * POSTCAR will call invd so don't make assumptions on cbmem + * and external stage cache being UC. + */ +static void postcar_flush_cache(void) +{ + uintptr_t stage_cache_base; + size_t stage_cache_size; + prog_segment_loaded((uintptr_t)cbmem_top(), cbmem_overhead_size(), SEG_FINAL); + if (CONFIG(TSEG_STAGE_CACHE)) { + stage_cache_external_region((void **)&stage_cache_base, &stage_cache_size); + prog_segment_loaded(stage_cache_base, stage_cache_size, SEG_FINAL); + } +} + void run_postcar_phase(struct postcar_frame *pcf) { struct prog prog = @@ -222,8 +237,10 @@ parameters between S3 resume and normal boot. On the platforms where the values are the same it's a nop. */ finalize_load(prog.arg, pcf->stack); - } else + } else { load_postcar_cbfs(&prog, pcf); + postcar_flush_cache(); + } /* As postcar exist, it's end of romstage here */ timestamp_add_now(TS_END_ROMSTAGE); diff --git a/src/cpu/x86/cache/Makefile.inc b/src/cpu/x86/cache/Makefile.inc index b33b9ee..759488e 100644 --- a/src/cpu/x86/cache/Makefile.inc +++ b/src/cpu/x86/cache/Makefile.inc @@ -1 +1,2 @@ +romstage-y += cache.c ramstage-y += cache.c diff --git a/src/cpu/x86/cache/cache.c b/src/cpu/x86/cache/cache.c index 2313c4d..ac2c45b 100644 --- a/src/cpu/x86/cache/cache.c +++ b/src/cpu/x86/cache/cache.c @@ -11,8 +11,11 @@ * GNU General Public License for more details. */ +#include <cbmem.h> +#include <program_loading.h> #include <console/console.h> #include <cpu/x86/cache.h> +#include <arch/cpu.h> void x86_enable_cache(void) { @@ -20,3 +23,47 @@ printk(BIOS_INFO, "Enabling cache\n"); enable_cache(); } + +int clflush_supported(void) +{ + return (cpuid_edx(1) >> 19) & 1; +} + +static void clflush_region(uintptr_t start, size_t size) +{ + uintptr_t addr; + size_t cl_size = (cpuid_ebx(1) >> 8) & 0xff; + if (!clflush_supported()) + return; + for (addr = (start / cl_size) * cl_size; addr < start + size; addr += cl_size) + clflush((void *)addr); +} + +static int dram_ready; + +/* + * For each segment of a program loaded this function is called + * to invalidate caches for the addresses of the loaded segment + */ +void arch_segment_loaded(uintptr_t start, size_t size, int flags) +{ + /* INVD is only called in postcar stage so we only need + to make sure that our things hit dram during romstage. */ + if (!ENV_ROMSTAGE) + return; + if (flags != SEG_FINAL) + return; + if (!dram_ready) + return; + + if (!clflush_supported()) + printk(BIOS_DEBUG, "Not flushing cache to ram, CLFLUSH not supported\n"); + clflush_region(start, size); +} + +static void set_dram_ready(int unused) +{ + dram_ready = 1; +} + +ROMSTAGE_CBMEM_INIT_HOOK(set_dram_ready); diff --git a/src/include/cpu/x86/cache.h b/src/include/cpu/x86/cache.h index 713ca32..2d2727f 100644 --- a/src/include/cpu/x86/cache.h +++ b/src/include/cpu/x86/cache.h @@ -55,6 +55,8 @@ asm volatile ("clflush (%0)"::"r" (addr)); } +int clflush_supported(void); + /* The following functions require the __always_inline due to AMD * function STOP_CAR_AND_CPU that disables cache as * RAM, the cache as RAM stack can no longer be used. Called -- To view, visit https://review.coreboot.org/c/coreboot/+/37196 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b Gerrit-Change-Number: 37196 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-MessageType: newchange

10 45

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit February 2020