coreboot-gerrit September 2019

coreboot-gerrit@coreboot.org

1 participants
1442 discussions

Change in coreboot[master]: [WIP] AGESA, binaryPI: Remove generic device for SPD eeproms
by Kyösti Mälkki (Code Review) 12 Dec '19

12 Dec '19

Kyösti Mälkki has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35102 ) Change subject: [WIP] AGESA, binaryPI: Remove generic device for SPD eeproms ...................................................................... [WIP] AGESA, binaryPI: Remove generic device for SPD eeproms Change-Id: Ieab695022d0dd2f2671f9058db97bdd6fb29a10d Signed-off-by: Kyösti Mälkki <kyosti.malkki(a)gmail.com> --- M src/mainboard/amd/bettong/devicetree.cb M src/mainboard/amd/gardenia/devicetree.cb M src/mainboard/amd/inagua/devicetree.cb M src/mainboard/amd/lamar/devicetree.cb M src/mainboard/amd/olivehill/devicetree.cb M src/mainboard/amd/olivehillplus/devicetree.cb M src/mainboard/amd/parmer/devicetree.cb M src/mainboard/amd/persimmon/devicetree.cb M src/mainboard/amd/thatcher/devicetree.cb M src/mainboard/amd/torpedo/devicetree.cb M src/mainboard/asrock/e350m1/devicetree.cb M src/mainboard/asrock/imb-a180/devicetree.cb M src/mainboard/asus/am1i-a/devicetree.cb M src/mainboard/asus/f2a85-m/devicetree_f2a85-m.cb M src/mainboard/asus/f2a85-m/devicetree_f2a85-m_le.cb M src/mainboard/asus/f2a85-m/devicetree_f2a85-m_pro.cb M src/mainboard/biostar/am1ml/devicetree.cb M src/mainboard/elmex/pcm205400/devicetree.cb M src/mainboard/hp/abm/devicetree.cb M src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb M src/mainboard/jetway/nf81-t56n-lf/devicetree.cb M src/mainboard/lenovo/g505s/devicetree.cb M src/mainboard/lippert/frontrunner-af/devicetree.cb M src/mainboard/lippert/toucan-af/devicetree.cb M src/mainboard/msi/ms7721/devicetree.cb 25 files changed, 0 insertions(+), 156 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/35102/1 diff --git a/src/mainboard/amd/bettong/devicetree.cb b/src/mainboard/amd/bettong/devicetree.cb index 84aaf41..e318b6d 100644 --- a/src/mainboard/amd/bettong/devicetree.cb +++ b/src/mainboard/amd/bettong/devicetree.cb @@ -43,12 +43,6 @@ device pci 11.0 on end # SATA device pci 12.0 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM #device pci 14.2 on end # HDA 0x4383 device pci 14.3 on end # LPC 0x439d diff --git a/src/mainboard/amd/gardenia/devicetree.cb b/src/mainboard/amd/gardenia/devicetree.cb index e9946ad..beee845 100644 --- a/src/mainboard/amd/gardenia/devicetree.cb +++ b/src/mainboard/amd/gardenia/devicetree.cb @@ -41,9 +41,6 @@ device pci 11.0 on end # SATA device pci 12.0 on end # EHCI device pci 14.0 on # SM - chip drivers/generic/generic # dimm 0-0-0 - device i2c 51 on end - end end # SM device pci 14.3 on end # LPC 0x790e device pci 14.7 on end # SD diff --git a/src/mainboard/amd/inagua/devicetree.cb b/src/mainboard/amd/inagua/devicetree.cb index 578c654..cc28124 100644 --- a/src/mainboard/amd/inagua/devicetree.cb +++ b/src/mainboard/amd/inagua/devicetree.cb @@ -38,12 +38,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/amd/lamar/devicetree.cb b/src/mainboard/amd/lamar/devicetree.cb index d7f3f05..e57a6c6 100644 --- a/src/mainboard/amd/lamar/devicetree.cb +++ b/src/mainboard/amd/lamar/devicetree.cb @@ -54,18 +54,6 @@ device pci 13.0 on end # 0x7807 USB OHCI device pci 13.2 on end # 0x7808 USB EHCI device pci 14.0 on # 0x780B SMBus - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end end # SM device pci 14.1 on end # 0x780C IDE device pci 14.2 on end # 0x780D HDA diff --git a/src/mainboard/amd/olivehill/devicetree.cb b/src/mainboard/amd/olivehill/devicetree.cb index bf8d476..a7933ce 100644 --- a/src/mainboard/amd/olivehill/devicetree.cb +++ b/src/mainboard/amd/olivehill/devicetree.cb @@ -41,12 +41,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.2 on end # HDA 0x4383 device pci 14.3 on end # LPC 0x439d diff --git a/src/mainboard/amd/olivehillplus/devicetree.cb b/src/mainboard/amd/olivehillplus/devicetree.cb index 430b17b..4b47642d 100644 --- a/src/mainboard/amd/olivehillplus/devicetree.cb +++ b/src/mainboard/amd/olivehillplus/devicetree.cb @@ -42,12 +42,6 @@ device pci 12.0 on end # EHCI #0 device pci 13.0 on end # EHCI #1 device pci 14.0 on # SMBus - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SMbus device pci 14.2 on end # HDA 0x4383 device pci 14.3 on end # LPC 0x439d diff --git a/src/mainboard/amd/parmer/devicetree.cb b/src/mainboard/amd/parmer/devicetree.cb index e619def..7e0fc2c 100644 --- a/src/mainboard/amd/parmer/devicetree.cb +++ b/src/mainboard/amd/parmer/devicetree.cb @@ -44,12 +44,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/amd/persimmon/devicetree.cb b/src/mainboard/amd/persimmon/devicetree.cb index 323e7f2..40ea282 100644 --- a/src/mainboard/amd/persimmon/devicetree.cb +++ b/src/mainboard/amd/persimmon/devicetree.cb @@ -37,12 +37,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/amd/thatcher/devicetree.cb b/src/mainboard/amd/thatcher/devicetree.cb index 4ae1ba9..a55fa25 100644 --- a/src/mainboard/amd/thatcher/devicetree.cb +++ b/src/mainboard/amd/thatcher/devicetree.cb @@ -44,12 +44,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/amd/torpedo/devicetree.cb b/src/mainboard/amd/torpedo/devicetree.cb index 2adfb27..00923ea 100644 --- a/src/mainboard/amd/torpedo/devicetree.cb +++ b/src/mainboard/amd/torpedo/devicetree.cb @@ -42,12 +42,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # IDE device pci 14.2 on end # HDA diff --git a/src/mainboard/asrock/e350m1/devicetree.cb b/src/mainboard/asrock/e350m1/devicetree.cb index e374c41..5d368fa 100644 --- a/src/mainboard/asrock/e350m1/devicetree.cb +++ b/src/mainboard/asrock/e350m1/devicetree.cb @@ -39,12 +39,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/asrock/imb-a180/devicetree.cb b/src/mainboard/asrock/imb-a180/devicetree.cb index 2c4a4aa..3ade19b 100644 --- a/src/mainboard/asrock/imb-a180/devicetree.cb +++ b/src/mainboard/asrock/imb-a180/devicetree.cb @@ -42,12 +42,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.2 on end # HDA 0x4383 device pci 14.3 on diff --git a/src/mainboard/asus/am1i-a/devicetree.cb b/src/mainboard/asus/am1i-a/devicetree.cb index 53114c1..763761a 100644 --- a/src/mainboard/asus/am1i-a/devicetree.cb +++ b/src/mainboard/asus/am1i-a/devicetree.cb @@ -43,12 +43,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x439d diff --git a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m.cb b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m.cb index 349a845..c95fe84 100644 --- a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m.cb +++ b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m.cb @@ -47,12 +47,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_le.cb b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_le.cb index af0e4cc..3e39ef3 100644 --- a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_le.cb +++ b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_le.cb @@ -47,12 +47,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_pro.cb b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_pro.cb index 238ab51..e261505 100644 --- a/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_pro.cb +++ b/src/mainboard/asus/f2a85-m/devicetree_f2a85-m_pro.cb @@ -38,18 +38,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 52 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 2 - device i2c 51 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 3 - device i2c 53 on end # 7-bit SPD address - end end # SM device pci 14.1 off end # unused device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/biostar/am1ml/devicetree.cb b/src/mainboard/biostar/am1ml/devicetree.cb index 400653d..e6adc0a 100644 --- a/src/mainboard/biostar/am1ml/devicetree.cb +++ b/src/mainboard/biostar/am1ml/devicetree.cb @@ -42,12 +42,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # there is no legacy ide device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/elmex/pcm205400/devicetree.cb b/src/mainboard/elmex/pcm205400/devicetree.cb index 405f3e0..d11529b 100644 --- a/src/mainboard/elmex/pcm205400/devicetree.cb +++ b/src/mainboard/elmex/pcm205400/devicetree.cb @@ -37,12 +37,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 off end # HDA 0x4383 diff --git a/src/mainboard/hp/abm/devicetree.cb b/src/mainboard/hp/abm/devicetree.cb index c7a7510..2786f78 100644 --- a/src/mainboard/hp/abm/devicetree.cb +++ b/src/mainboard/hp/abm/devicetree.cb @@ -41,9 +41,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end end # SM device pci 14.2 off end # HDA 0x4383 device pci 14.3 on # LPC 0x439d diff --git a/src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb b/src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb index ad59974..35ccca7 100644 --- a/src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb +++ b/src/mainboard/hp/pavilion_m6_1035dx/devicetree.cb @@ -41,12 +41,6 @@ device pci 13.0 on end # USB device pci 13.2 on end # USB device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x439d diff --git a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb index 6289438..faed1c5 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb +++ b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb @@ -38,12 +38,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/lenovo/g505s/devicetree.cb b/src/mainboard/lenovo/g505s/devicetree.cb index 99f42d6..5be9111 100644 --- a/src/mainboard/lenovo/g505s/devicetree.cb +++ b/src/mainboard/lenovo/g505s/devicetree.cb @@ -45,12 +45,6 @@ device pci 13.0 on end # FCH USB OHCI Controller device pci 13.2 on end # FCH USB EHCI Controller device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.2 on end # FCH Azalia Controller device pci 14.3 on # FCH LPC Bridge [1022:780e] diff --git a/src/mainboard/lippert/frontrunner-af/devicetree.cb b/src/mainboard/lippert/frontrunner-af/devicetree.cb index b72059a..5e84fcb 100644 --- a/src/mainboard/lippert/frontrunner-af/devicetree.cb +++ b/src/mainboard/lippert/frontrunner-af/devicetree.cb @@ -37,12 +37,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 off end - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/lippert/toucan-af/devicetree.cb b/src/mainboard/lippert/toucan-af/devicetree.cb index cb9aa8e..25d84db 100644 --- a/src/mainboard/lippert/toucan-af/devicetree.cb +++ b/src/mainboard/lippert/toucan-af/devicetree.cb @@ -38,12 +38,6 @@ device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 off end - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 diff --git a/src/mainboard/msi/ms7721/devicetree.cb b/src/mainboard/msi/ms7721/devicetree.cb index d3991f1..1c73404 100644 --- a/src/mainboard/msi/ms7721/devicetree.cb +++ b/src/mainboard/msi/ms7721/devicetree.cb @@ -46,12 +46,6 @@ device pci 13.0 on end # USB OHCI device pci 13.2 on end # USB EHCI device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end end # SM device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # Azalia (Audio) -- To view, visit https://review.coreboot.org/c/coreboot/+/35102 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Ieab695022d0dd2f2671f9058db97bdd6fb29a10d Gerrit-Change-Number: 35102 Gerrit-PatchSet: 1 Gerrit-Owner: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Gerrit-Reviewer: Alexander Couzens <lynxis(a)fe80.eu> Gerrit-Reviewer: Kyösti Mälkki <kyosti.malkki(a)gmail.com> Gerrit-Reviewer: Patrick Rudolph <siro(a)das-labor.org> Gerrit-MessageType: newchange

4 10

Change in coreboot[master]: [WIP]drivers/aspeed: Add AST2500 support
by Patrick Rudolph (Code Review) 12 Dec '19

12 Dec '19

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34793 ) Change subject: [WIP]drivers/aspeed: Add AST2500 support ...................................................................... [WIP]drivers/aspeed: Add AST2500 support Untested on AST2500. Code for AST2400 still works. TODO: Adjust Copyright. Copy code from GNU/Linux kernel to coreboot to add AST2500 support. Change-Id: I25bd34dd52a0acd3e04fc5818e011215ef907fad Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/drivers/aspeed/common/ast_dp501.c M src/drivers/aspeed/common/ast_dram_tables.h M src/drivers/aspeed/common/ast_drv.h M src/drivers/aspeed/common/ast_post.c M src/drivers/aspeed/common/ast_tables.h 5 files changed, 656 insertions(+), 170 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/93/34793/1 diff --git a/src/drivers/aspeed/common/ast_dp501.c b/src/drivers/aspeed/common/ast_dp501.c index 2e8b897..4b867c0 100644 --- a/src/drivers/aspeed/common/ast_dp501.c +++ b/src/drivers/aspeed/common/ast_dp501.c @@ -145,7 +145,7 @@ return false; } -bool ast_launch_m68k(struct drm_device *dev) +static bool ast_launch_m68k(struct drm_device *dev) { struct ast_private *ast = dev->dev_private; u32 i, data, len = 0; @@ -159,7 +159,10 @@ if (ast->dp501_fw_addr) { fw_addr = ast->dp501_fw_addr; len = 32*1024; - } else if (ast->dp501_fw) { + } else { + if (!ast->dp501_fw) + return false; + fw_addr = (u8 *)ast->dp501_fw->data; len = ast->dp501_fw->size; } @@ -224,11 +227,7 @@ /* Read Link Capability */ offset = 0xf014; - data = ast_mindwm(ast, boot_address + offset); - linkcap[0] = (data & 0xff000000) >> 24; - linkcap[1] = (data & 0x00ff0000) >> 16; - linkcap[2] = (data & 0x0000ff00) >> 8; - linkcap[3] = (data & 0x000000ff); + *(u32 *)linkcap = ast_mindwm(ast, boot_address + offset); if (linkcap[2] == 0) { linkrate = linkcap[0]; linklanes = linkcap[1]; diff --git a/src/drivers/aspeed/common/ast_dram_tables.h b/src/drivers/aspeed/common/ast_dram_tables.h index 1d46ca6..986b2c9 100644 --- a/src/drivers/aspeed/common/ast_dram_tables.h +++ b/src/drivers/aspeed/common/ast_dram_tables.h @@ -158,4 +158,66 @@ { 0xffff, 0xffffffff }, }; +/* + * AST2500 DRAM settings modules + */ +#define REGTBL_NUM 17 +#define REGIDX_010 0 +#define REGIDX_014 1 +#define REGIDX_018 2 +#define REGIDX_020 3 +#define REGIDX_024 4 +#define REGIDX_02C 5 +#define REGIDX_030 6 +#define REGIDX_214 7 +#define REGIDX_2E0 8 +#define REGIDX_2E4 9 +#define REGIDX_2E8 10 +#define REGIDX_2EC 11 +#define REGIDX_2F0 12 +#define REGIDX_2F4 13 +#define REGIDX_2F8 14 +#define REGIDX_RFC 15 +#define REGIDX_PLL 16 + +static const u32 ast2500_ddr3_1600_timing_table[REGTBL_NUM] = { + 0x64604D38, /* 0x010 */ + 0x29690599, /* 0x014 */ + 0x00000300, /* 0x018 */ + 0x00000000, /* 0x020 */ + 0x00000000, /* 0x024 */ + 0x02181E70, /* 0x02C */ + 0x00000040, /* 0x030 */ + 0x00000024, /* 0x214 */ + 0x02001300, /* 0x2E0 */ + 0x0E0000A0, /* 0x2E4 */ + 0x000E001B, /* 0x2E8 */ + 0x35B8C105, /* 0x2EC */ + 0x08090408, /* 0x2F0 */ + 0x9B000800, /* 0x2F4 */ + 0x0E400A00, /* 0x2F8 */ + 0x9971452F, /* tRFC */ + 0x000071C1 /* PLL */ + }; + + static const u32 ast2500_ddr4_1600_timing_table[REGTBL_NUM] = { + 0x63604E37, /* 0x010 */ + 0xE97AFA99, /* 0x014 */ + 0x00019000, /* 0x018 */ + 0x08000000, /* 0x020 */ + 0x00000400, /* 0x024 */ + 0x00000410, /* 0x02C */ + 0x00000101, /* 0x030 */ + 0x00000024, /* 0x214 */ + 0x03002900, /* 0x2E0 */ + 0x0E0000A0, /* 0x2E4 */ + 0x000E001C, /* 0x2E8 */ + 0x35B8C106, /* 0x2EC */ + 0x08080607, /* 0x2F0 */ + 0x9B000900, /* 0x2F4 */ + 0x0E400A00, /* 0x2F8 */ + 0x99714545, /* tRFC */ + 0x000071C1 /* PLL */ + }; + #endif diff --git a/src/drivers/aspeed/common/ast_drv.h b/src/drivers/aspeed/common/ast_drv.h index 53640f1..e2904c2 100644 --- a/src/drivers/aspeed/common/ast_drv.h +++ b/src/drivers/aspeed/common/ast_drv.h @@ -44,6 +44,7 @@ AST2150, AST2300, AST2400, + AST2500, AST1180, }; @@ -60,6 +61,7 @@ #define AST_DRAM_1Gx32 3 #define AST_DRAM_2Gx16 6 #define AST_DRAM_4Gx16 7 +#define AST_DRAM_8Gx16 8 struct ast_fbdev; @@ -213,11 +215,10 @@ u32 ast_mindwm(struct ast_private *ast, u32 r); void ast_moutdwm(struct ast_private *ast, u32 r, u32 v); /* ast dp501 */ -int ast_load_dp501_microcode(struct drm_device *dev); void ast_set_dp501_video_output(struct drm_device *dev, u8 mode); -bool ast_launch_m68k(struct drm_device *dev); bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size); bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata); u8 ast_get_dp501_max_clk(struct drm_device *dev); void ast_init_3rdtx(struct drm_device *dev); +void ast_release_firmware(struct drm_device *dev); #endif diff --git a/src/drivers/aspeed/common/ast_post.c b/src/drivers/aspeed/common/ast_post.c index 5f935b9..dc825b5 100644 --- a/src/drivers/aspeed/common/ast_post.c +++ b/src/drivers/aspeed/common/ast_post.c @@ -34,7 +34,8 @@ #include "ast_drv.h" #include "ast_dram_tables.h" -static void ast_init_dram_2300(struct drm_device *dev); +static void ast_post_chip_2300(struct drm_device *dev); +static void ast_post_chip_2500(struct drm_device *dev); void ast_enable_vga(struct drm_device *dev) { @@ -61,13 +62,9 @@ /* TODO 1180 */ } else { ch = ast_io_read8(ast, AST_IO_VGA_ENABLE_PORT); - if (ch) { - ast_open_key(ast); - ch = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xff); - return ch & 0x04; - } + return !!(ch & 0x01); } - return 0; + return false; } static const u8 extreginfo[] = { 0x0f, 0x04, 0x1c, 0xff }; @@ -86,10 +83,11 @@ uint8_t revision = data & 0xff; /* reset scratch */ - for (i = 0x81; i <= 0x8f; i++) + for (i = 0x81; i <= 0x9f; i++) ast_set_index_reg(ast, AST_IO_CRTC_PORT, i, 0x00); - if (ast->chip == AST2300 || ast->chip == AST2400) { + if (ast->chip == AST2300 || ast->chip == AST2400 || + ast->chip == AST2500) { if (revision >= 0x20) ext_reg_info = extreginfo_ast2300; else @@ -113,7 +111,8 @@ /* Enable RAMDAC for A1 */ reg = 0x04; - if (ast->chip == AST2300 || ast->chip == AST2400) + if (ast->chip == AST2300 || ast->chip == AST2400 || + ast->chip == AST2500) reg |= 0x20; ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xff, reg); } @@ -394,12 +393,14 @@ pci_write_config_dword(ast->dev->pdev, 0x04, reg); ast_enable_vga(dev); - ast_enable_mmio(dev); ast_open_key(ast); + ast_enable_mmio(dev); ast_set_def_ext_reg(dev); - if (ast->chip == AST2300 || ast->chip == AST2400) - ast_init_dram_2300(dev); + if (ast->chip == AST2500) + ast_post_chip_2500(dev); + else if (ast->chip == AST2300 || ast->chip == AST2400) + ast_post_chip_2300(dev); else ast_init_dram_reg(dev); @@ -459,87 +460,72 @@ 0x7C61D253 }; -static int mmc_test_burst(struct ast_private *ast, u32 datagen) +static bool mmc_test(struct ast_private *ast, u32 datagen, u8 test_ctl) { u32 data, timeout; ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - ast_moutdwm(ast, 0x1e6e0070, 0x000000c1 | (datagen << 3)); - timeout = 0; - do { - data = ast_mindwm(ast, 0x1e6e0070) & 0x3000; - if (data & 0x2000) { - return 0; - } - if (++timeout > TIMEOUT) { - ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - return 0; - } - } while (!data); - ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - return 1; -} - -static int mmc_test_burst2(struct ast_private *ast, u32 datagen) -{ - u32 data, timeout; - - ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - ast_moutdwm(ast, 0x1e6e0070, 0x00000041 | (datagen << 3)); - timeout = 0; - do { - data = ast_mindwm(ast, 0x1e6e0070) & 0x1000; - if (++timeout > TIMEOUT) { - ast_moutdwm(ast, 0x1e6e0070, 0x0); - return -1; - } - } while (!data); - data = ast_mindwm(ast, 0x1e6e0078); - data = (data | (data >> 16)) & 0xffff; - ast_moutdwm(ast, 0x1e6e0070, 0x0); - return data; -} - -static int mmc_test_single(struct ast_private *ast, u32 datagen) -{ - u32 data, timeout; - - ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - ast_moutdwm(ast, 0x1e6e0070, 0x000000c5 | (datagen << 3)); + ast_moutdwm(ast, 0x1e6e0070, (datagen << 3) | test_ctl); timeout = 0; do { data = ast_mindwm(ast, 0x1e6e0070) & 0x3000; if (data & 0x2000) - return 0; + return false; if (++timeout > TIMEOUT) { - ast_moutdwm(ast, 0x1e6e0070, 0x0); - return 0; + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); + return false; } } while (!data); ast_moutdwm(ast, 0x1e6e0070, 0x0); - return 1; + return true; } -static int mmc_test_single2(struct ast_private *ast, u32 datagen) +static u32 mmc_test2(struct ast_private *ast, u32 datagen, u8 test_ctl) { u32 data, timeout; ast_moutdwm(ast, 0x1e6e0070, 0x00000000); - ast_moutdwm(ast, 0x1e6e0070, 0x00000005 | (datagen << 3)); + ast_moutdwm(ast, 0x1e6e0070, (datagen << 3) | test_ctl); timeout = 0; do { data = ast_mindwm(ast, 0x1e6e0070) & 0x1000; if (++timeout > TIMEOUT) { ast_moutdwm(ast, 0x1e6e0070, 0x0); - return -1; + return 0xffffffff; } } while (!data); data = ast_mindwm(ast, 0x1e6e0078); data = (data | (data >> 16)) & 0xffff; - ast_moutdwm(ast, 0x1e6e0070, 0x0); + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); return data; } + +static bool mmc_test_burst(struct ast_private *ast, u32 datagen) +{ + return mmc_test(ast, datagen, 0xc1); +} + +static u32 mmc_test_burst2(struct ast_private *ast, u32 datagen) +{ + return mmc_test2(ast, datagen, 0x41); +} + +static bool mmc_test_single(struct ast_private *ast, u32 datagen) +{ + return mmc_test(ast, datagen, 0xc5); +} + +static u32 mmc_test_single2(struct ast_private *ast, u32 datagen) +{ + return mmc_test2(ast, datagen, 0x05); +} + +static bool mmc_test_single_2500(struct ast_private *ast, u32 datagen) +{ + return mmc_test(ast, datagen, 0x85); +} + static int cbr_test(struct ast_private *ast) { u32 data; @@ -615,16 +601,16 @@ return data2; } -static u32 cbr_test3(struct ast_private *ast) +static bool cbr_test3(struct ast_private *ast) { if (!mmc_test_burst(ast, 0)) - return 0; + return false; if (!mmc_test_single(ast, 0)) - return 0; - return 1; + return false; + return true; } -static u32 cbr_scan3(struct ast_private *ast) +static bool cbr_scan3(struct ast_private *ast) { u32 patcnt, loop; @@ -635,9 +621,9 @@ break; } if (loop == 2) - return 0; + return false; } - return 1; + return true; } static bool finetuneDQI_L(struct ast_private *ast, struct ast2300_dram_param *param) @@ -1661,7 +1647,7 @@ } -static void ast_init_dram_2300(struct drm_device *dev) +static void ast_post_chip_2300(struct drm_device *dev) { struct ast_private *ast = dev->dev_private; struct ast2300_dram_param param; @@ -1746,11 +1732,409 @@ } /* wait ready */ - timeout = 0; do { reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); - timeout++; - } while (((reg & 0x40) == 0) && (timeout < COREBOOT_AST_FAILOVER_TIMEOUT)); - if (timeout >= COREBOOT_AST_FAILOVER_TIMEOUT) - dev_err(dev->pdev, "Timeout while waiting for register\n"); + } while ((reg & 0x40) == 0); +} + +static bool cbr_test_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E6E0074, 0x0000FFFF); + ast_moutdwm(ast, 0x1E6E007C, 0xFF00FF00); + if (!mmc_test_burst(ast, 0)) + return false; + if (!mmc_test_single_2500(ast, 0)) + return false; + return true; +} + +static bool ddr_test_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E6E0074, 0x0000FFFF); + ast_moutdwm(ast, 0x1E6E007C, 0xFF00FF00); + if (!mmc_test_burst(ast, 0)) + return false; + if (!mmc_test_burst(ast, 1)) + return false; + if (!mmc_test_burst(ast, 2)) + return false; + if (!mmc_test_burst(ast, 3)) + return false; + if (!mmc_test_single_2500(ast, 0)) + return false; + return true; +} + +static void ddr_init_common_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E6E0034, 0x00020080); + ast_moutdwm(ast, 0x1E6E0008, 0x2003000F); + ast_moutdwm(ast, 0x1E6E0038, 0x00000FFF); + ast_moutdwm(ast, 0x1E6E0040, 0x88448844); + ast_moutdwm(ast, 0x1E6E0044, 0x24422288); + ast_moutdwm(ast, 0x1E6E0048, 0x22222222); + ast_moutdwm(ast, 0x1E6E004C, 0x22222222); + ast_moutdwm(ast, 0x1E6E0050, 0x80000000); + ast_moutdwm(ast, 0x1E6E0208, 0x00000000); + ast_moutdwm(ast, 0x1E6E0218, 0x00000000); + ast_moutdwm(ast, 0x1E6E0220, 0x00000000); + ast_moutdwm(ast, 0x1E6E0228, 0x00000000); + ast_moutdwm(ast, 0x1E6E0230, 0x00000000); + ast_moutdwm(ast, 0x1E6E02A8, 0x00000000); + ast_moutdwm(ast, 0x1E6E02B0, 0x00000000); + ast_moutdwm(ast, 0x1E6E0240, 0x86000000); + ast_moutdwm(ast, 0x1E6E0244, 0x00008600); + ast_moutdwm(ast, 0x1E6E0248, 0x80000000); + ast_moutdwm(ast, 0x1E6E024C, 0x80808080); +} + +static void ddr_phy_init_2500(struct ast_private *ast) +{ + u32 data, pass, timecnt; + + pass = 0; + ast_moutdwm(ast, 0x1E6E0060, 0x00000005); + while (!pass) { + for (timecnt = 0; timecnt < TIMEOUT; timecnt++) { + data = ast_mindwm(ast, 0x1E6E0060) & 0x1; + if (!data) + break; + } + if (timecnt != TIMEOUT) { + data = ast_mindwm(ast, 0x1E6E0300) & 0x000A0000; + if (!data) + pass = 1; + } + if (!pass) { + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + udelay(10); /* delay 10 us */ + ast_moutdwm(ast, 0x1E6E0060, 0x00000005); + } + } + + ast_moutdwm(ast, 0x1E6E0060, 0x00000006); +} + +/* + * Check DRAM Size + * 1Gb : 0x80000000 ~ 0x87FFFFFF + * 2Gb : 0x80000000 ~ 0x8FFFFFFF + * 4Gb : 0x80000000 ~ 0x9FFFFFFF + * 8Gb : 0x80000000 ~ 0xBFFFFFFF + */ +static void check_dram_size_2500(struct ast_private *ast, u32 tRFC) +{ + u32 reg_04, reg_14; + + reg_04 = ast_mindwm(ast, 0x1E6E0004) & 0xfffffffc; + reg_14 = ast_mindwm(ast, 0x1E6E0014) & 0xffffff00; + + ast_moutdwm(ast, 0xA0100000, 0x41424344); + ast_moutdwm(ast, 0x90100000, 0x35363738); + ast_moutdwm(ast, 0x88100000, 0x292A2B2C); + ast_moutdwm(ast, 0x80100000, 0x1D1E1F10); + + /* Check 8Gbit */ + if (ast_mindwm(ast, 0xA0100000) == 0x41424344) { + reg_04 |= 0x03; + reg_14 |= (tRFC >> 24) & 0xFF; + /* Check 4Gbit */ + } else if (ast_mindwm(ast, 0x90100000) == 0x35363738) { + reg_04 |= 0x02; + reg_14 |= (tRFC >> 16) & 0xFF; + /* Check 2Gbit */ + } else if (ast_mindwm(ast, 0x88100000) == 0x292A2B2C) { + reg_04 |= 0x01; + reg_14 |= (tRFC >> 8) & 0xFF; + } else { + reg_14 |= tRFC & 0xFF; + } + ast_moutdwm(ast, 0x1E6E0004, reg_04); + ast_moutdwm(ast, 0x1E6E0014, reg_14); +} + +static void enable_cache_2500(struct ast_private *ast) +{ + u32 reg_04, data; + + reg_04 = ast_mindwm(ast, 0x1E6E0004); + ast_moutdwm(ast, 0x1E6E0004, reg_04 | 0x1000); + + do + data = ast_mindwm(ast, 0x1E6E0004); + while (!(data & 0x80000)); + ast_moutdwm(ast, 0x1E6E0004, reg_04 | 0x400); +} + +static void set_mpll_2500(struct ast_private *ast) +{ + u32 addr, data, param; + + /* Reset MMC */ + ast_moutdwm(ast, 0x1E6E0000, 0xFC600309); + ast_moutdwm(ast, 0x1E6E0034, 0x00020080); + for (addr = 0x1e6e0004; addr < 0x1e6e0090;) { + ast_moutdwm(ast, addr, 0x0); + addr += 4; + } + ast_moutdwm(ast, 0x1E6E0034, 0x00020000); + + ast_moutdwm(ast, 0x1E6E2000, 0x1688A8A8); + data = ast_mindwm(ast, 0x1E6E2070) & 0x00800000; + if (data) { + /* CLKIN = 25MHz */ + param = 0x930023E0; + ast_moutdwm(ast, 0x1E6E2160, 0x00011320); + } else { + /* CLKIN = 24MHz */ + param = 0x93002400; + } + ast_moutdwm(ast, 0x1E6E2020, param); + udelay(100); +} + +static void reset_mmc_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E78505C, 0x00000004); + ast_moutdwm(ast, 0x1E785044, 0x00000001); + ast_moutdwm(ast, 0x1E785048, 0x00004755); + ast_moutdwm(ast, 0x1E78504C, 0x00000013); + mdelay(100); + ast_moutdwm(ast, 0x1E785054, 0x00000077); + ast_moutdwm(ast, 0x1E6E0000, 0xFC600309); +} + +static void ddr3_init_2500(struct ast_private *ast, const u32 *ddr_table) +{ + + ast_moutdwm(ast, 0x1E6E0004, 0x00000303); + ast_moutdwm(ast, 0x1E6E0010, ddr_table[REGIDX_010]); + ast_moutdwm(ast, 0x1E6E0014, ddr_table[REGIDX_014]); + ast_moutdwm(ast, 0x1E6E0018, ddr_table[REGIDX_018]); + ast_moutdwm(ast, 0x1E6E0020, ddr_table[REGIDX_020]); /* MODEREG4/6 */ + ast_moutdwm(ast, 0x1E6E0024, ddr_table[REGIDX_024]); /* MODEREG5 */ + ast_moutdwm(ast, 0x1E6E002C, ddr_table[REGIDX_02C] | 0x100); /* MODEREG0/2 */ + ast_moutdwm(ast, 0x1E6E0030, ddr_table[REGIDX_030]); /* MODEREG1/3 */ + + /* DDR PHY Setting */ + ast_moutdwm(ast, 0x1E6E0200, 0x02492AAE); + ast_moutdwm(ast, 0x1E6E0204, 0x00001001); + ast_moutdwm(ast, 0x1E6E020C, 0x55E00B0B); + ast_moutdwm(ast, 0x1E6E0210, 0x20000000); + ast_moutdwm(ast, 0x1E6E0214, ddr_table[REGIDX_214]); + ast_moutdwm(ast, 0x1E6E02E0, ddr_table[REGIDX_2E0]); + ast_moutdwm(ast, 0x1E6E02E4, ddr_table[REGIDX_2E4]); + ast_moutdwm(ast, 0x1E6E02E8, ddr_table[REGIDX_2E8]); + ast_moutdwm(ast, 0x1E6E02EC, ddr_table[REGIDX_2EC]); + ast_moutdwm(ast, 0x1E6E02F0, ddr_table[REGIDX_2F0]); + ast_moutdwm(ast, 0x1E6E02F4, ddr_table[REGIDX_2F4]); + ast_moutdwm(ast, 0x1E6E02F8, ddr_table[REGIDX_2F8]); + ast_moutdwm(ast, 0x1E6E0290, 0x00100008); + ast_moutdwm(ast, 0x1E6E02C0, 0x00000006); + + /* Controller Setting */ + ast_moutdwm(ast, 0x1E6E0034, 0x00020091); + + /* Wait DDR PHY init done */ + ddr_phy_init_2500(ast); + + ast_moutdwm(ast, 0x1E6E0120, ddr_table[REGIDX_PLL]); + ast_moutdwm(ast, 0x1E6E000C, 0x42AA5C81); + ast_moutdwm(ast, 0x1E6E0034, 0x0001AF93); + + check_dram_size_2500(ast, ddr_table[REGIDX_RFC]); + enable_cache_2500(ast); + ast_moutdwm(ast, 0x1E6E001C, 0x00000008); + ast_moutdwm(ast, 0x1E6E0038, 0xFFFFFF00); +} + +static void ddr4_init_2500(struct ast_private *ast, const u32 *ddr_table) +{ + u32 data, data2, pass, retrycnt; + u32 ddr_vref, phy_vref; + u32 min_ddr_vref = 0, min_phy_vref = 0; + u32 max_ddr_vref = 0, max_phy_vref = 0; + + ast_moutdwm(ast, 0x1E6E0004, 0x00000313); + ast_moutdwm(ast, 0x1E6E0010, ddr_table[REGIDX_010]); + ast_moutdwm(ast, 0x1E6E0014, ddr_table[REGIDX_014]); + ast_moutdwm(ast, 0x1E6E0018, ddr_table[REGIDX_018]); + ast_moutdwm(ast, 0x1E6E0020, ddr_table[REGIDX_020]); /* MODEREG4/6 */ + ast_moutdwm(ast, 0x1E6E0024, ddr_table[REGIDX_024]); /* MODEREG5 */ + ast_moutdwm(ast, 0x1E6E002C, ddr_table[REGIDX_02C] | 0x100); /* MODEREG0/2 */ + ast_moutdwm(ast, 0x1E6E0030, ddr_table[REGIDX_030]); /* MODEREG1/3 */ + + /* DDR PHY Setting */ + ast_moutdwm(ast, 0x1E6E0200, 0x42492AAE); + ast_moutdwm(ast, 0x1E6E0204, 0x09002000); + ast_moutdwm(ast, 0x1E6E020C, 0x55E00B0B); + ast_moutdwm(ast, 0x1E6E0210, 0x20000000); + ast_moutdwm(ast, 0x1E6E0214, ddr_table[REGIDX_214]); + ast_moutdwm(ast, 0x1E6E02E0, ddr_table[REGIDX_2E0]); + ast_moutdwm(ast, 0x1E6E02E4, ddr_table[REGIDX_2E4]); + ast_moutdwm(ast, 0x1E6E02E8, ddr_table[REGIDX_2E8]); + ast_moutdwm(ast, 0x1E6E02EC, ddr_table[REGIDX_2EC]); + ast_moutdwm(ast, 0x1E6E02F0, ddr_table[REGIDX_2F0]); + ast_moutdwm(ast, 0x1E6E02F4, ddr_table[REGIDX_2F4]); + ast_moutdwm(ast, 0x1E6E02F8, ddr_table[REGIDX_2F8]); + ast_moutdwm(ast, 0x1E6E0290, 0x00100008); + ast_moutdwm(ast, 0x1E6E02C4, 0x3C183C3C); + ast_moutdwm(ast, 0x1E6E02C8, 0x00631E0E); + + /* Controller Setting */ + ast_moutdwm(ast, 0x1E6E0034, 0x0001A991); + + /* Train PHY Vref first */ + pass = 0; + + for (retrycnt = 0; retrycnt < 4 && pass == 0; retrycnt++) { + max_phy_vref = 0x0; + pass = 0; + ast_moutdwm(ast, 0x1E6E02C0, 0x00001C06); + for (phy_vref = 0x40; phy_vref < 0x80; phy_vref++) { + ast_moutdwm(ast, 0x1E6E000C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + ast_moutdwm(ast, 0x1E6E02CC, phy_vref | (phy_vref << 8)); + /* Fire DFI Init */ + ddr_phy_init_2500(ast); + ast_moutdwm(ast, 0x1E6E000C, 0x00005C01); + if (cbr_test_2500(ast)) { + pass++; + data = ast_mindwm(ast, 0x1E6E03D0); + data2 = data >> 8; + data = data & 0xff; + if (data > data2) + data = data2; + if (max_phy_vref < data) { + max_phy_vref = data; + min_phy_vref = phy_vref; + } + } else if (pass > 0) + break; + } + } + ast_moutdwm(ast, 0x1E6E02CC, min_phy_vref | (min_phy_vref << 8)); + + /* Train DDR Vref next */ + pass = 0; + + for (retrycnt = 0; retrycnt < 4 && pass == 0; retrycnt++) { + min_ddr_vref = 0xFF; + max_ddr_vref = 0x0; + pass = 0; + for (ddr_vref = 0x00; ddr_vref < 0x40; ddr_vref++) { + ast_moutdwm(ast, 0x1E6E000C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + ast_moutdwm(ast, 0x1E6E02C0, 0x00000006 | (ddr_vref << 8)); + /* Fire DFI Init */ + ddr_phy_init_2500(ast); + ast_moutdwm(ast, 0x1E6E000C, 0x00005C01); + if (cbr_test_2500(ast)) { + pass++; + if (min_ddr_vref > ddr_vref) + min_ddr_vref = ddr_vref; + if (max_ddr_vref < ddr_vref) + max_ddr_vref = ddr_vref; + } else if (pass != 0) + break; + } + } + + ast_moutdwm(ast, 0x1E6E000C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + ddr_vref = (min_ddr_vref + max_ddr_vref + 1) >> 1; + ast_moutdwm(ast, 0x1E6E02C0, 0x00000006 | (ddr_vref << 8)); + + /* Wait DDR PHY init done */ + ddr_phy_init_2500(ast); + + ast_moutdwm(ast, 0x1E6E0120, ddr_table[REGIDX_PLL]); + ast_moutdwm(ast, 0x1E6E000C, 0x42AA5C81); + ast_moutdwm(ast, 0x1E6E0034, 0x0001AF93); + + check_dram_size_2500(ast, ddr_table[REGIDX_RFC]); + enable_cache_2500(ast); + ast_moutdwm(ast, 0x1E6E001C, 0x00000008); + ast_moutdwm(ast, 0x1E6E0038, 0xFFFFFF00); +} + +static bool ast_dram_init_2500(struct ast_private *ast) +{ + u32 data; + u32 max_tries = 5; + + do { + if (max_tries-- == 0) + return false; + set_mpll_2500(ast); + reset_mmc_2500(ast); + ddr_init_common_2500(ast); + + data = ast_mindwm(ast, 0x1E6E2070); + if (data & 0x01000000) + ddr4_init_2500(ast, ast2500_ddr4_1600_timing_table); + else + ddr3_init_2500(ast, ast2500_ddr3_1600_timing_table); + } while (!ddr_test_2500(ast)); + + ast_moutdwm(ast, 0x1E6E2040, ast_mindwm(ast, 0x1E6E2040) | 0x41); + + /* Patch code */ + data = ast_mindwm(ast, 0x1E6E200C) & 0xF9FFFFFF; + ast_moutdwm(ast, 0x1E6E200C, data | 0x10000000); + + return true; +} + +void ast_post_chip_2500(struct drm_device *dev) +{ + struct ast_private *ast = dev->dev_private; + u32 temp; + u8 reg; + + reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + if ((reg & 0x80) == 0) {/* vga only */ + /* Clear bus lock condition */ + ast_moutdwm(ast, 0x1e600000, 0xAEED1A03); + ast_moutdwm(ast, 0x1e600084, 0x00010000); + ast_moutdwm(ast, 0x1e600088, 0x00000000); + ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8); + ast_write32(ast, 0xf004, 0x1e6e0000); + ast_write32(ast, 0xf000, 0x1); + ast_write32(ast, 0x12000, 0x1688a8a8); + while (ast_read32(ast, 0x12000) != 0x1) + ; + + ast_write32(ast, 0x10000, 0xfc600309); + while (ast_read32(ast, 0x10000) != 0x1) + ; + + /* Slow down CPU/AHB CLK in VGA only mode */ + temp = ast_read32(ast, 0x12008); + temp |= 0x73; + ast_write32(ast, 0x12008, temp); + + /* Reset USB port to patch USB unknown device issue */ + ast_moutdwm(ast, 0x1e6e2090, 0x20000000); + temp = ast_mindwm(ast, 0x1e6e2094); + temp |= 0x00004000; + ast_moutdwm(ast, 0x1e6e2094, temp); + temp = ast_mindwm(ast, 0x1e6e2070); + if (temp & 0x00800000) { + ast_moutdwm(ast, 0x1e6e207c, 0x00800000); + mdelay(100); + ast_moutdwm(ast, 0x1e6e2070, 0x00800000); + } + + if (!ast_dram_init_2500(ast)) + printk(BIOS_ERR, "AST: DRAM init failed !\n"); + + temp = ast_mindwm(ast, 0x1e6e2040); + ast_moutdwm(ast, 0x1e6e2040, temp | 0x40); + } + + /* wait ready */ + do { + reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + } while ((reg & 0x40) == 0); } diff --git a/src/drivers/aspeed/common/ast_tables.h b/src/drivers/aspeed/common/ast_tables.h index 6c20f36..d665dd5 100644 --- a/src/drivers/aspeed/common/ast_tables.h +++ b/src/drivers/aspeed/common/ast_tables.h @@ -47,68 +47,99 @@ #define SyncPN (PVSync | NHSync) #define SyncNP (NVSync | PHSync) #define SyncNN (NVSync | NHSync) +#define AST2500PreCatchCRT 0x00004000 /* DCLK Index */ -#define VCLK25_175 0x00 -#define VCLK28_322 0x01 -#define VCLK31_5 0x02 -#define VCLK36 0x03 -#define VCLK40 0x04 -#define VCLK49_5 0x05 -#define VCLK50 0x06 -#define VCLK56_25 0x07 -#define VCLK65 0x08 -#define VCLK75 0x09 -#define VCLK78_75 0x0A -#define VCLK94_5 0x0B -#define VCLK108 0x0C -#define VCLK135 0x0D -#define VCLK157_5 0x0E -#define VCLK162 0x0F -/* #define VCLK193_25 0x10 */ -#define VCLK154 0x10 -#define VCLK83_5 0x11 -#define VCLK106_5 0x12 -#define VCLK146_25 0x13 -#define VCLK148_5 0x14 -#define VCLK71 0x15 -#define VCLK88_75 0x16 -#define VCLK119 0x17 -#define VCLK85_5 0x18 -#define VCLK97_75 0x19 -#define VCLK118_25 0x1A +#define VCLK25_175 0x00 +#define VCLK28_322 0x01 +#define VCLK31_5 0x02 +#define VCLK36 0x03 +#define VCLK40 0x04 +#define VCLK49_5 0x05 +#define VCLK50 0x06 +#define VCLK56_25 0x07 +#define VCLK65 0x08 +#define VCLK75 0x09 +#define VCLK78_75 0x0A +#define VCLK94_5 0x0B +#define VCLK108 0x0C +#define VCLK135 0x0D +#define VCLK157_5 0x0E +#define VCLK162 0x0F +/* #define VCLK193_25 0x10 */ +#define VCLK154 0x10 +#define VCLK83_5 0x11 +#define VCLK106_5 0x12 +#define VCLK146_25 0x13 +#define VCLK148_5 0x14 +#define VCLK71 0x15 +#define VCLK88_75 0x16 +#define VCLK119 0x17 +#define VCLK85_5 0x18 +#define VCLK97_75 0x19 +#define VCLK118_25 0x1A -static struct ast_vbios_dclk_info dclk_table[] = { - {0x2C, 0xE7, 0x03}, /* 00: VCLK25_175 */ - {0x95, 0x62, 0x03}, /* 01: VCLK28_322 */ - {0x67, 0x63, 0x01}, /* 02: VCLK31_5 */ - {0x76, 0x63, 0x01}, /* 03: VCLK36 */ - {0xEE, 0x67, 0x01}, /* 04: VCLK40 */ - {0x82, 0x62, 0x01}, /* 05: VCLK49_5 */ - {0xC6, 0x64, 0x01}, /* 06: VCLK50 */ - {0x94, 0x62, 0x01}, /* 07: VCLK56_25 */ - {0x80, 0x64, 0x00}, /* 08: VCLK65 */ - {0x7B, 0x63, 0x00}, /* 09: VCLK75 */ - {0x67, 0x62, 0x00}, /* 0A: VCLK78_75 */ - {0x7C, 0x62, 0x00}, /* 0B: VCLK94_5 */ - {0x8E, 0x62, 0x00}, /* 0C: VCLK108 */ - {0x85, 0x24, 0x00}, /* 0D: VCLK135 */ - {0x67, 0x22, 0x00}, /* 0E: VCLK157_5 */ - {0x6A, 0x22, 0x00}, /* 0F: VCLK162 */ - {0x4d, 0x4c, 0x80}, /* 10: VCLK154 */ - {0xa7, 0x78, 0x80}, /* 11: VCLK83.5 */ - {0x28, 0x49, 0x80}, /* 12: VCLK106.5 */ - {0x37, 0x49, 0x80}, /* 13: VCLK146.25 */ - {0x1f, 0x45, 0x80}, /* 14: VCLK148.5 */ - {0x47, 0x6c, 0x80}, /* 15: VCLK71 */ - {0x25, 0x65, 0x80}, /* 16: VCLK88.75 */ - {0x77, 0x58, 0x80}, /* 17: VCLK119 */ - {0x32, 0x67, 0x80}, /* 18: VCLK85_5 */ - {0x6a, 0x6d, 0x80}, /* 19: VCLK97_75 */ - {0x3b, 0x2c, 0x81}, /* 1A: VCLK118_25 */ +static const struct ast_vbios_dclk_info dclk_table[] = { + {0x2C, 0xE7, 0x03}, /* 00: VCLK25_175 */ + {0x95, 0x62, 0x03}, /* 01: VCLK28_322 */ + {0x67, 0x63, 0x01}, /* 02: VCLK31_5 */ + {0x76, 0x63, 0x01}, /* 03: VCLK36 */ + {0xEE, 0x67, 0x01}, /* 04: VCLK40 */ + {0x82, 0x62, 0x01}, /* 05: VCLK49_5 */ + {0xC6, 0x64, 0x01}, /* 06: VCLK50 */ + {0x94, 0x62, 0x01}, /* 07: VCLK56_25 */ + {0x80, 0x64, 0x00}, /* 08: VCLK65 */ + {0x7B, 0x63, 0x00}, /* 09: VCLK75 */ + {0x67, 0x62, 0x00}, /* 0A: VCLK78_75 */ + {0x7C, 0x62, 0x00}, /* 0B: VCLK94_5 */ + {0x8E, 0x62, 0x00}, /* 0C: VCLK108 */ + {0x85, 0x24, 0x00}, /* 0D: VCLK135 */ + {0x67, 0x22, 0x00}, /* 0E: VCLK157_5 */ + {0x6A, 0x22, 0x00}, /* 0F: VCLK162 */ + {0x4d, 0x4c, 0x80}, /* 10: VCLK154 */ + {0x68, 0x6f, 0x80}, /* 11: VCLK83.5 */ + {0x28, 0x49, 0x80}, /* 12: VCLK106.5 */ + {0x37, 0x49, 0x80}, /* 13: VCLK146.25 */ + {0x1f, 0x45, 0x80}, /* 14: VCLK148.5 */ + {0x47, 0x6c, 0x80}, /* 15: VCLK71 */ + {0x25, 0x65, 0x80}, /* 16: VCLK88.75 */ + {0x77, 0x58, 0x80}, /* 17: VCLK119 */ + {0x32, 0x67, 0x80}, /* 18: VCLK85_5 */ + {0x6a, 0x6d, 0x80}, /* 19: VCLK97_75 */ + {0x3b, 0x2c, 0x81}, /* 1A: VCLK118_25 */ }; -static struct ast_vbios_stdtable vbios_stdtable[] = { +static const struct ast_vbios_dclk_info dclk_table_ast2500[] = { + {0x2C, 0xE7, 0x03}, /* 00: VCLK25_175 */ + {0x95, 0x62, 0x03}, /* 01: VCLK28_322 */ + {0x67, 0x63, 0x01}, /* 02: VCLK31_5 */ + {0x76, 0x63, 0x01}, /* 03: VCLK36 */ + {0xEE, 0x67, 0x01}, /* 04: VCLK40 */ + {0x82, 0x62, 0x01}, /* 05: VCLK49_5 */ + {0xC6, 0x64, 0x01}, /* 06: VCLK50 */ + {0x94, 0x62, 0x01}, /* 07: VCLK56_25 */ + {0x80, 0x64, 0x00}, /* 08: VCLK65 */ + {0x7B, 0x63, 0x00}, /* 09: VCLK75 */ + {0x67, 0x62, 0x00}, /* 0A: VCLK78_75 */ + {0x7C, 0x62, 0x00}, /* 0B: VCLK94_5 */ + {0x8E, 0x62, 0x00}, /* 0C: VCLK108 */ + {0x85, 0x24, 0x00}, /* 0D: VCLK135 */ + {0x67, 0x22, 0x00}, /* 0E: VCLK157_5 */ + {0x6A, 0x22, 0x00}, /* 0F: VCLK162 */ + {0x4d, 0x4c, 0x80}, /* 10: VCLK154 */ + {0x68, 0x6f, 0x80}, /* 11: VCLK83.5 */ + {0x28, 0x49, 0x80}, /* 12: VCLK106.5 */ + {0x37, 0x49, 0x80}, /* 13: VCLK146.25 */ + {0x1f, 0x45, 0x80}, /* 14: VCLK148.5 */ + {0x47, 0x6c, 0x80}, /* 15: VCLK71 */ + {0x25, 0x65, 0x80}, /* 16: VCLK88.75 */ + {0x58, 0x01, 0x42}, /* 17: VCLK119 */ + {0x32, 0x67, 0x80}, /* 18: VCLK85_5 */ + {0x6a, 0x6d, 0x80}, /* 19: VCLK97_75 */ + {0x44, 0x20, 0x43}, /* 1A: VCLK118_25 */ +}; + +static const struct ast_vbios_stdtable vbios_stdtable[] = { /* MD_2_3_400 */ { 0x67, @@ -181,7 +212,7 @@ }, }; -static struct ast_vbios_enhtable res_640x480[] = { +static const struct ast_vbios_enhtable res_640x480[] = { { 800, 640, 8, 96, 525, 480, 2, 2, VCLK25_175, /* 60Hz */ (SyncNN | HBorder | VBorder | Charx8Dot), 60, 1, 0x2E }, { 832, 640, 16, 40, 520, 480, 1, 3, VCLK31_5, /* 72Hz */ @@ -194,7 +225,7 @@ (SyncNN | Charx8Dot) , 0xFF, 4, 0x2E }, }; -static struct ast_vbios_enhtable res_800x600[] = { +static const struct ast_vbios_enhtable res_800x600[] = { {1024, 800, 24, 72, 625, 600, 1, 2, VCLK36, /* 56Hz */ (SyncPP | Charx8Dot), 56, 1, 0x30 }, {1056, 800, 40, 128, 628, 600, 1, 4, VCLK40, /* 60Hz */ @@ -210,7 +241,7 @@ }; -static struct ast_vbios_enhtable res_1024x768[] = { +static const struct ast_vbios_enhtable res_1024x768[] = { {1344, 1024, 24, 136, 806, 768, 3, 6, VCLK65, /* 60Hz */ (SyncNN | Charx8Dot), 60, 1, 0x31 }, {1328, 1024, 24, 136, 806, 768, 3, 6, VCLK75, /* 70Hz */ @@ -223,7 +254,7 @@ (SyncPP | Charx8Dot), 0xFF, 4, 0x31 }, }; -static struct ast_vbios_enhtable res_1280x1024[] = { +static const struct ast_vbios_enhtable res_1280x1024[] = { {1688, 1280, 48, 112, 1066, 1024, 1, 3, VCLK108, /* 60Hz */ (SyncPP | Charx8Dot), 60, 1, 0x32 }, {1688, 1280, 16, 144, 1066, 1024, 1, 3, VCLK135, /* 75Hz */ @@ -234,7 +265,7 @@ (SyncPP | Charx8Dot), 0xFF, 3, 0x32 }, }; -static struct ast_vbios_enhtable res_1600x1200[] = { +static const struct ast_vbios_enhtable res_1600x1200[] = { {2160, 1600, 64, 192, 1250, 1200, 1, 3, VCLK162, /* 60Hz */ (SyncPP | Charx8Dot), 60, 1, 0x33 }, {2160, 1600, 64, 192, 1250, 1200, 1, 3, VCLK162, /* end */ @@ -242,34 +273,39 @@ }; /* 16:9 */ -static struct ast_vbios_enhtable res_1360x768[] = { - {1792, 1360, 64,112, 795, 768, 3, 6, VCLK85_5, /* 60Hz */ +static const struct ast_vbios_enhtable res_1360x768[] = { + {1792, 1360, 64, 112, 795, 768, 3, 6, VCLK85_5, /* 60Hz */ (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x39 }, - {1792, 1360, 64,112, 795, 768, 3, 6, VCLK85_5, /* end */ - (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x39 }, + {1792, 1360, 64, 112, 795, 768, 3, 6, VCLK85_5, /* end */ + (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 0xFF, 1, 0x39 }, }; -static struct ast_vbios_enhtable res_1600x900[] = { - {1760, 1600, 48, 32, 926, 900, 3, 5, VCLK97_75, /* 60Hz CVT RB */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x3A }, - {2112, 1600, 88,168, 934, 900, 3, 5, VCLK118_25, /* 60Hz CVT */ +static const struct ast_vbios_enhtable res_1600x900[] = { + {1760, 1600, 48, 32, 926, 900, 3, 5, VCLK97_75, /* 60Hz CVT RB */ + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x3A }, + {2112, 1600, 88, 168, 934, 900, 3, 5, VCLK118_25, /* 60Hz CVT */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 2, 0x3A }, - {2112, 1600, 88,168, 934, 900, 3, 5, VCLK118_25, /* 60Hz CVT */ + {2112, 1600, 88, 168, 934, 900, 3, 5, VCLK118_25, /* 60Hz CVT */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 2, 0x3A }, }; -static struct ast_vbios_enhtable res_1920x1080[] = { +static const struct ast_vbios_enhtable res_1920x1080[] = { {2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5, /* 60Hz */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x38 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x38 }, {2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5, /* 60Hz */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x38 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 0xFF, 1, 0x38 }, }; /* 16:10 */ -static struct ast_vbios_enhtable res_1280x800[] = { +static const struct ast_vbios_enhtable res_1280x800[] = { {1440, 1280, 48, 32, 823, 800, 3, 6, VCLK71, /* 60Hz RB */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x35 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x35 }, {1680, 1280, 72,128, 831, 800, 3, 6, VCLK83_5, /* 60Hz */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 2, 0x35 }, {1680, 1280, 72,128, 831, 800, 3, 6, VCLK83_5, /* 60Hz */ @@ -277,29 +313,33 @@ }; -static struct ast_vbios_enhtable res_1440x900[] = { +static const struct ast_vbios_enhtable res_1440x900[] = { {1600, 1440, 48, 32, 926, 900, 3, 6, VCLK88_75, /* 60Hz RB */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x36 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x36 }, {1904, 1440, 80,152, 934, 900, 3, 6, VCLK106_5, /* 60Hz */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 2, 0x36 }, {1904, 1440, 80,152, 934, 900, 3, 6, VCLK106_5, /* 60Hz */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 2, 0x36 }, }; -static struct ast_vbios_enhtable res_1680x1050[] = { +static const struct ast_vbios_enhtable res_1680x1050[] = { {1840, 1680, 48, 32, 1080, 1050, 3, 6, VCLK119, /* 60Hz RB */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x37 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x37 }, {2240, 1680,104,176, 1089, 1050, 3, 6, VCLK146_25, /* 60Hz */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 2, 0x37 }, {2240, 1680,104,176, 1089, 1050, 3, 6, VCLK146_25, /* 60Hz */ (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 2, 0x37 }, }; -static struct ast_vbios_enhtable res_1920x1200[] = { +static const struct ast_vbios_enhtable res_1920x1200[] = { {2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz RB*/ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x34 }, - {2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz RB */ - (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x34 }, + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 60, 1, 0x34 }, + {2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz RB */ + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), 0xFF, 1, 0x34 }, }; #endif -- To view, visit https://review.coreboot.org/c/coreboot/+/34793 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I25bd34dd52a0acd3e04fc5818e011215ef907fad Gerrit-Change-Number: 34793 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

5 10

Change in coreboot[master]: [WIP, DONOTMERGE] soc/intel: (try to) run clang-format
by Angel Pons (Code Review) 11 Dec '19

11 Dec '19

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35090 ) Change subject: [WIP, DONOTMERGE] soc/intel: (try to) run clang-format ...................................................................... [WIP, DONOTMERGE] soc/intel: (try to) run clang-format Change-Id: I4a1e646d81da329479d6179ed1a42879b5d10fee Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M src/soc/intel/apollolake/acpi.c M src/soc/intel/apollolake/chip.c M src/soc/intel/apollolake/romstage.c M src/soc/intel/apollolake/uart.c M src/soc/intel/broadwell/acpi.c M src/soc/intel/broadwell/finalize.c M src/soc/intel/broadwell/lpc.c M src/soc/intel/broadwell/smmrelocate.c M src/soc/intel/broadwell/systemagent.c M src/soc/intel/cannonlake/acpi.c M src/soc/intel/cannonlake/fsp_params.c M src/soc/intel/cannonlake/romstage/fsp_params.c M src/soc/intel/cannonlake/smmrelocate.c M src/soc/intel/cannonlake/uart.c M src/soc/intel/common/block/graphics/graphics.c M src/soc/intel/common/block/gspi/gspi.c M src/soc/intel/common/block/i2c/i2c.c M src/soc/intel/common/block/xhci/xhci.c M src/soc/intel/denverton_ns/memmap.c M src/soc/intel/fsp_baytrail/acpi.c M src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c M src/soc/intel/fsp_broadwell_de/acpi.c M src/soc/intel/icelake/fsp_params.c M src/soc/intel/icelake/romstage/fsp_params.c M src/soc/intel/icelake/smmrelocate.c M src/soc/intel/icelake/uart.c M src/soc/intel/skylake/acpi.c M src/soc/intel/skylake/chip.c M src/soc/intel/skylake/chip_fsp20.c M src/soc/intel/skylake/irq.c M src/soc/intel/skylake/memmap.c M src/soc/intel/skylake/romstage/romstage_fsp20.c M src/soc/intel/skylake/romstage/systemagent.c M src/soc/intel/skylake/smmrelocate.c M src/soc/intel/skylake/systemagent.c M src/soc/intel/skylake/uart.c M src/soc/intel/skylake/vr_config.c 37 files changed, 2,180 insertions(+), 2,595 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/90/35090/1 -- To view, visit https://review.coreboot.org/c/coreboot/+/35090 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I4a1e646d81da329479d6179ed1a42879b5d10fee Gerrit-Change-Number: 35090 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

2 2

Change in coreboot[master]: device/software_i2c: Add function to recover bus
by Patrick Rudolph (Code Review) 11 Dec '19

11 Dec '19

Patrick Rudolph has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35725 ) Change subject: device/software_i2c: Add function to recover bus ...................................................................... device/software_i2c: Add function to recover bus As the software bus might be in unknown state, add a function to reset it to known (idle) state. Copied from linux kernel. Tested on Supermicro X11SSH-TF. Change-Id: I264471e872cb353b28a6b71cc64a11aec59e63f2 Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- M src/device/software_i2c.c M src/include/device/i2c_simple.h 2 files changed, 48 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/25/35725/1 diff --git a/src/device/software_i2c.c b/src/device/software_i2c.c index 5dc9990..eecb670 100644 --- a/src/device/software_i2c.c +++ b/src/device/software_i2c.c @@ -343,3 +343,49 @@ "SDA %d, SCL %d\n", bus, bits, software_i2c[bus]->get_sda(bus), software_i2c[bus]->get_scl(bus)); } + +/* + * Try to recover the bus from unknown state. + * Useful if the power rail or reset line isn't under firmware control. + */ +#define RECOVERY_CLK_CNT 9 + +int i2c_recover_bus(unsigned bus) +{ + int i = 0, scl = 1; + + printk(BIOS_INFO, "software_i2c(%d): Trying i2c bus recovery\n", bus); + + /* + * If we can set SDA, we will always create a STOP to ensure additional + * pulses will do no harm. This is achieved by letting SDA follow SCL + * half a cycle later. Check the 'incomplete_write_byte' fault injector + * for details. + */ + software_i2c[bus]->set_scl(bus, 1); + wait(bus); + software_i2c[bus]->set_sda(bus, 1); + wait(bus); + + /* + * By this time SCL is high, as we need to give 9 falling-rising edges + */ + while (i++ < RECOVERY_CLK_CNT * 2) { + if (scl) { + /* SCL shouldn't be low here */ + if (!software_i2c[bus]->get_scl(bus)) { + printk(BIOS_ERR, "software_i2c(%d): SCL stuck low\n", bus); + return 1; + break; + } + } + + scl = !scl; + software_i2c[bus]->set_scl(bus, scl); + /* Creating STOP again, see above */ + wait(bus); + software_i2c[bus]->set_sda(bus, scl); + wait(bus); + } + return 0; +} diff --git a/src/include/device/i2c_simple.h b/src/include/device/i2c_simple.h index e3cc892..7f508b2 100644 --- a/src/include/device/i2c_simple.h +++ b/src/include/device/i2c_simple.h @@ -45,6 +45,8 @@ int i2c_write_field(unsigned int bus, uint8_t slave, uint8_t reg, uint8_t data, uint8_t mask, uint8_t shift); +int i2c_recover_bus(unsigned int bus); + /* * software_i2c is supposed to be a debug feature. It's usually not compiled in, * but when it is it can be dynamically enabled at runtime for certain busses. -- To view, visit https://review.coreboot.org/c/coreboot/+/35725 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I264471e872cb353b28a6b71cc64a11aec59e63f2 Gerrit-Change-Number: 35725 Gerrit-PatchSet: 1 Gerrit-Owner: Patrick Rudolph <patrick.rudolph(a)9elements.com> Gerrit-MessageType: newchange

6 14

Change in coreboot[master]: payloads/bayou: remove unhooked payload
by Angel Pons (Code Review) 09 Dec '19

09 Dec '19

Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/34565 ) Change subject: payloads/bayou: remove unhooked payload ...................................................................... payloads/bayou: remove unhooked payload The bayou payload is not attached to the build system in any way, and has not been for quite a while. Since selecting it in Kconfig does nothing, remove this payload now that coreboot 4.10 has been released. Change-Id: Icfb18b88e460a4e4b538b7efe907d4eef6c40638 Signed-off-by: Angel Pons <th3fanbus(a)gmail.com> --- M payloads/Kconfig D payloads/bayou/Doxyfile D payloads/bayou/Makefile D payloads/bayou/bayou.h D payloads/bayou/bayou.ldscript D payloads/bayou/bayou.xml.example D payloads/bayou/config.c D payloads/bayou/lzma.c D payloads/bayou/lzmadecode.c D payloads/bayou/lzmadecode.h D payloads/bayou/main.c D payloads/bayou/menu.c D payloads/bayou/nrv2b.c D payloads/bayou/payload.c D payloads/bayou/self.c D payloads/bayou/self.h 16 files changed, 0 insertions(+), 3,181 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/65/34565/1 diff --git a/payloads/Kconfig b/payloads/Kconfig index d0f8a44..da597a8 100644 --- a/payloads/Kconfig +++ b/payloads/Kconfig @@ -40,21 +40,12 @@ You will be able to specify the location and file name of the payload image later. -config PAYLOAD_BAYOU - bool "Bayou" - depends on ARCH_X86 - help - Select this option if you want to set bayou as your primary - payload. - source "payloads/external/*/Kconfig.name" endchoice source "payloads/external/*/Kconfig" -source "payloads/bayou/Kconfig" - config PAYLOAD_FILE string "Payload path and filename" depends on PAYLOAD_ELF || PAYLOAD_FIT diff --git a/payloads/bayou/Doxyfile b/payloads/bayou/Doxyfile deleted file mode 100644 index acab01c..0000000 --- a/payloads/bayou/Doxyfile +++ /dev/null @@ -1,1635 +0,0 @@ -# Doxyfile 1.7.1 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See -# http://www.gnu.org/software/libiconv for the list of possible encodings. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - -PROJECT_NAME = bayou - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = doxygen - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - -CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, -# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = YES - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = YES - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments -# (thus requiring an explicit @brief command for a brief description.) - -JAVADOC_AUTOBRIEF = YES - -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified -# scopes will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for -# Fortran. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for -# VHDL. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public -# instead of private inheritance when no explicit protection keyword is present. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen to replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - -SUBGROUPING = YES - -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. - -TYPEDEF_HIDES_STRUCT = NO - -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penality. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will rougly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols - -SYMBOL_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = YES - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default -# anonymous namespace are hidden. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - -CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = YES - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen -# will list include files with double quotes in the documentation -# rather than with sharp brackets. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen -# will sort the (brief and detailed) documentation of class members so that -# constructors and destructors are listed first. If set to NO (the default) -# the constructors will appear in the respective orders defined by -# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. -# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO -# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) -# the group names will appear in their defined order. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - -SORT_BY_SCOPE_NAME = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the -# Folder Tree View (if specified). The default is YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. -# This will remove the Namespaces entry from the Quick Index -# and from the Folder Tree View (if specified). The default is YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command <command> <input-file>, where <command> is the value of -# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file -# provided by doxygen. Whatever the program writes to standard output -# is used as the file version. See the manual for examples. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. -# You can optionally specify a file name after the option, if omitted -# DoxygenLayout.xml will be used as the name of the layout file. - -LAYOUT_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be abled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - -WARN_NO_PARAMDOC = YES - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = . - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for -# the list of possible encodings. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 - -FILE_PATTERNS = - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = YES - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - -EXCLUDE = util/kconfig - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded -# from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories -# for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test - -EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command <filter> <input-file>, where <filter> -# is the value of the INPUT_FILTER tag, and <input-file> is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. -# Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. -# The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER -# is applied to all files. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - -FILTER_SOURCE_FILES = NO - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - -SOURCE_BROWSER = YES - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - -STRIP_CODE_COMMENTS = NO - -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = YES - -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. -# Otherwise they will link to the documentation. - -REFERENCES_LINK_SOURCE = YES - -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You -# will need version 4.8.6 or higher. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = YES - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = YES - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# If the HTML_FOOTER_DESCRIPTION tag is set to YES, Doxygen will -# add generated date, project name and doxygen version to HTML footer. - -HTML_FOOTER_DESCRIPTION= YES - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! - -HTML_STYLESHEET = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. -# Doxygen will adjust the colors in the stylesheet and background images -# according to this color. Hue is specified as an angle on a colorwheel, -# see http://en.wikipedia.org/wiki/Hue for more information. -# For instance the value 0 represents red, 60 is yellow, 120 is green, -# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. -# The allowed range is 0 to 359. - -HTML_COLORSTYLE_HUE = 220 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of -# the colors in the HTML output. For a value of 0 the output will use -# grayscales only. A value of 255 will produce the most vivid colors. - -HTML_COLORSTYLE_SAT = 100 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to -# the luminance component of the colors in the HTML output. Values below -# 100 gradually make the output lighter, whereas values above 100 make -# the output darker. The value divided by 100 is the actual gamma applied, -# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, -# and 100 does not change the gamma. - -HTML_COLORSTYLE_GAMMA = 80 - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting -# this to NO can help when comparing the output of multiple runs. - -HTML_TIMESTAMP = NO - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). - -HTML_DYNAMIC_SECTIONS = YES - -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. - -GENERATE_DOCSET = NO - -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) -# can be grouped. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen -# will append .docset to the name. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. - -DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. - -DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file -# content. - -CHM_INDEX_ENCODING = - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - -TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated -# that can be used as input for Qt's qhelpgenerator to generate a -# Qt Compressed Help (.qch) of the generated HTML documentation. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. -# The path specified is relative to the HTML output folder. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#namespace - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#virtual-folders - -QHP_VIRTUAL_FOLDER = doc - -# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to -# add. For more information please see -# http://doc.trolltech.com/qthelpproject.html#custom-filters - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see -# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> -# Qt Help Project / Custom Filters</a>. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's -# filter section matches. -# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> -# Qt Help Project / Filter Attributes</a>. - -QHP_SECT_FILTER_ATTRS = - -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated -# .qhp file. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files -# will be generated, which together with the HTML files, form an Eclipse help -# plugin. To install this plugin and make it available under the help contents -# menu in Eclipse, the contents of the directory containing the HTML and XML -# files needs to be copied into the plugins directory of eclipse. The name of -# the directory within the plugins directory should be the same as -# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before -# the help appears. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have -# this name. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - -DISABLE_INDEX = NO - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - -ENUM_VALUES_PER_LINE = 4 - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to YES, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). -# Windows users are probably better off using the HTML help feature. - -GENERATE_TREEVIEW = YES - -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open -# links to external symbols imported via tag files in a separate window. - -EXT_LINKS_IN_WINDOW = NO - -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory -# to force them to be regenerated. - -FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are -# not supported properly for IE 6.0, but are supported on all modern browsers. -# Note that when changing this option you need to delete any form_*.png files -# in the HTML output before the changes have effect. - -FORMULA_TRANSPARENT = YES - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box -# for the HTML output. The underlying search engine uses javascript -# and DHTML and should work on any modern browser. Note that when using -# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets -# (GENERATE_DOCSET) there is already a search function so this one should -# typically be disabled. For large projects the javascript based search engine -# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. - -SEARCHENGINE = YES - -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a PHP enabled web server instead of at the web client -# using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server -# based approach is that it scales better to large projects and allows -# full text search. The disadvances is that it is more difficult to setup -# and does not have live searching capabilities. - -SERVER_BASED_SEARCH = NO - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the -# Makefile that is written to the output directory. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = NO - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = NO - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - -LATEX_HIDE_INDICES = NO - -# If LATEX_SOURCE_CODE is set to YES then doxygen will include -# source code with syntax highlighting in the LaTeX output. -# Note that which sources are shown also depends on other settings -# such as SOURCE_BROWSER. - -LATEX_SOURCE_CODE = NO - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - -XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - -XML_PROGRAMLISTING = YES - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. -# This is useful -# if you want to understand what is going on. -# On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_DEFINED tags. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - -PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse -# the parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option is superseded by the HAVE_DOT option below. This is only a -# fallback. It is recommended to install and use dot, since it yields more -# powerful graphs. - -CLASS_DIAGRAMS = YES - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = NO - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = YES - -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is -# allowed to run in parallel. When set to 0 (the default) doxygen will -# base this on the number of processors available in the system. You can set it -# explicitly to a value larger than 0 to get control over the balance -# between CPU load and processing speed. - -DOT_NUM_THREADS = 0 - -# By default doxygen will write a font called FreeSans.ttf to the output -# directory and reference it in all dot files that doxygen generates. This -# font does not include all possible unicode characters however, so when you need -# these (or just want a differently looking font) you can specify the font name -# using DOT_FONTNAME. You need need to make sure dot is able to find the font, -# which can be done by putting it in a standard location or by setting the -# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory -# containing the font. - -DOT_FONTNAME = FreeSans - -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. -# The default size is 10pt. - -DOT_FONTSIZE = 10 - -# By default doxygen will tell dot to use the output directory to look for the -# FreeSans.ttf font (which doxygen will put there itself). If you specify a -# different font using DOT_FONTNAME you can set the path where dot -# can find it using this tag. - -DOT_FONTPATH = - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = YES - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - -GROUP_GRAPHS = YES - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - -UML_LOOK = YES - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs -# for selected functions only using the \callgraph command. - -CALL_GRAPH = YES - -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller -# graphs for selected functions only using the \callergraph command. - -CALLER_GRAPH = YES - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = YES - -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - -DIRECTORY_GRAPH = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - -DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note -# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. - -DOT_GRAPH_MAX_NODES = 50 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. - -MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of -# a graph (i.e. they become hard to read). - -DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - -DOT_MULTI_TARGETS = YES - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES diff --git a/payloads/bayou/Makefile b/payloads/bayou/Makefile deleted file mode 100644 index 7a4b08b..0000000 --- a/payloads/bayou/Makefile +++ /dev/null @@ -1,67 +0,0 @@ -## -## This file is part of the bayou project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License version 2 as -## published by the Free Software Foundation. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -CONFIG_LZMA=y -CONFIG_NRV2B=y -CONFIG_BUILTIN_LAR=y - -PBUILDER_CONFIG=bayou.xml -BUILTIN_LAR=builtin.lar - -export src := $(CURDIR) -export obj := $(src)/build - -LIBPAYLOAD_DIR := $(obj)/libpayload - -CC?=gcc -STRIP?=strip -OBJCOPY?=objcopy - -FFLAGS-y= -FFLAGS-$(CONFIG_BUILTIN_LAR) += -DCONFIG_BUILTIN_LAR -FFLAGS-$(CONFIG_LZMA) += -DCONFIG_LZMA -FFLAGS-$(CONFIG_NRV2B) += -DCONFIG_NRV2B - -OBJECTS-y=main.o payload.o config.o menu.o self.o -OBJECTS-$(CONFIG_LZMA) += lzma.o -OBJECTS-$(CONFIG_NRV2B) += nrv2b.o -OBJECTS-$(CONFIG_BUILTIN_LAR) += builtin-lar.o - -CFLAGS= -Wall -Werror -Os $(FFLAGS-y) -LDFLAGS=-Wl,-T,bayou.ldscript -static -LIBGCC=$(shell $(CC) -m32 -print-libgcc-file-name) - -LPCC=$(LIBPAYLOAD_DIR)/bin/lpgcc - -bayou.elf: $(OBJECTS-y) - $(LPCC) $(LDFLAGS) -m32 -o $@ $(OBJECTS-y) - @$(STRIP) $@ - -builtin-lar.o: $(BUILTIN_LAR) - @$(OBJCOPY) -I binary -B i386 -O elf32-i386 $(BUILTIN_LAR) $@ - -builtin.lar: util/pbuilder/pbuilder - @rm -f $@ - util/pbuilder/pbuilder -c $(PBUILDER_CONFIG) create $@ - -util/pbuilder/pbuilder: - $(MAKE) -C util/pbuilder - -%.o: %.c - $(LPCC) $(CFLAGS) -c -o $@ $< - -clean: - rm -f *.o bayou.elf builtin.lar - $(MAKE) -C util/pbuilder clean diff --git a/payloads/bayou/bayou.h b/payloads/bayou/bayou.h deleted file mode 100644 index 6bf10a5..0000000 --- a/payloads/bayou/bayou.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef BAYOU_H_ -#define BAYOU_H_ - -#include <libpayload.h> - -#define BAYOU_MAX_ENTRIES 10 - -struct bpt_config { - u32 id; - u8 timeout; - u8 entries; - u8 padding[10]; -}; - -struct bpt_pentry { - u8 index; - u8 parent; - u8 type; - u8 flags; - u8 title[64]; - u8 nlen; -}; - -#define BPT_ID 0x30545042 -#define BPT_TYPE_CHOOSER 0x01 -#define BPT_TYPE_CHAIN 0x02 -#define BPT_TYPE_SUBCHAIN 0x03 - -#define BPT_FLAG_DEFAULT 0x01 -#define BPT_FLAG_NOSHOW 0x02 - -enum bayou_params { - BAYOU_PARAM_NAME = 0, - BAYOU_PARAM_LIST, - BAYOU_PARAM_DESC, - BAYOU_PARAMS_COUNT -}; - -struct payload { - struct bpt_pentry pentry; - struct larstat stat; - u8 *fptr; - char *params[BAYOU_PARAMS_COUNT]; -}; - -struct bayoucfg { - u8 timeout; - int n_entries; - struct payload entries[BAYOU_MAX_ENTRIES]; -}; - -extern struct bayoucfg bayoucfg; - -int verify_self(u8 *ptr); -int self_get_params(u8 *fptr, u8 **params); -int self_load_and_run(struct payload *p, int *ret); - -void menu(void); - -void run_payload(struct payload *p); -char *payload_get_name(struct payload *p); -struct payload *payload_get_default(void); -void run_payload_timeout(struct payload *p, int timeout); -void payload_parse_params(struct payload *pload, u8 *params, int len); - -int get_configuration(struct LAR *lar); - -#endif diff --git a/payloads/bayou/bayou.ldscript b/payloads/bayou/bayou.ldscript deleted file mode 100644 index 86baaec..0000000 --- a/payloads/bayou/bayou.ldscript +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -BASE_ADDRESS = 0x19000; - -OUTPUT_FORMAT(elf32-i386) -OUTPUT_ARCH(i386) - -ENTRY(_entry) - -HEAP_SIZE = 16384; -STACK_SIZE = 16384; - -SECTIONS -{ - . = BASE_ADDRESS; - - . = ALIGN(16); - _start = .; - - .text : { - *(.text._entry) - *(.text) - *(.text.*) - } - - .rodata : { - *(.rodata) - *(.rodata.*) - } - - .data : { - *(.data) - *(.data.*) - } - - _edata = .; - - .bss : { - *(.bss) - *(.bss.*) - *(COMMON) - - /* Stack and heap */ - - . = ALIGN(16); - _heap = .; - . += HEAP_SIZE; - . = ALIGN(16); - _eheap = .; - - _estack = .; - . += STACK_SIZE; - . = ALIGN(16); - _stack = .; - } - - _end = .; - - /DISCARD/ : { *(.comment) *(.note) *(.note.*) } -} diff --git a/payloads/bayou/bayou.xml.example b/payloads/bayou/bayou.xml.example deleted file mode 100644 index c52eaf2..0000000 --- a/payloads/bayou/bayou.xml.example +++ /dev/null @@ -1,37 +0,0 @@ - - - - -<BayouConfig> - <global> - <timeout>10</timeout> - </global> - <payloads> - <payload type="chain" flags="default"> - <title>Default Chain</title> - <chain> - <file>payloads/passwd.elf</file> - <lar>passwd</lar> - </chain> - <chain> - <file>payloads/coreinfo.elf</file> - </chain> - </payload> - <payload type="chooser"> - <file>payloads/coreinfo.elf</file> - </payload> - </payloads> -</BayouConfig> diff --git a/payloads/bayou/config.c b/payloads/bayou/config.c deleted file mode 100644 index ad315c8..0000000 --- a/payloads/bayou/config.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" - -struct bayoucfg bayoucfg; - -static int add_payload(struct LAR *lar, struct larent *larent) -{ - struct payload *payload; - int plen; - u8 *params = NULL; - u8 *fptr; - - if (bayoucfg.n_entries == BAYOU_MAX_ENTRIES) - return -1; - - payload = &bayoucfg.entries[bayoucfg.n_entries]; - - if (strncmp((char *)larent->name, "payload/", 8)) - return -1; - - if (larstat(lar, (const char *)larent->name, &payload->stat)) - return -1; - - /* Make sure the LAR entry is valid. */ - if (!lfverify(lar, (const char *)larent->name)) - return -1; - - /* Get a pointer to the start of the file. */ - fptr = larfptr(lar, (const char *)larent->name); - - if (fptr == NULL) - return -1; - - if (!verify_self(fptr)) - return -1; - - payload->pentry.index = bayoucfg.n_entries; - payload->pentry.parent = 0; - payload->pentry.type = BPT_TYPE_CHOOSER; - payload->pentry.flags = 0; - - plen = self_get_params(fptr, &params); - payload_parse_params(payload, params, plen); - - payload->fptr = fptr; - - bayoucfg.n_entries++; - - return 0; -} - -static int lar_walk_files(struct LAR *lar, - int (*cb) (struct LAR *, struct larent *)) -{ - struct larent *larent; - int ret = 0; - - rewindlar(lar); - - while ((larent = readlar(lar)) != NULL) { - if ((ret = cb(lar, larent))) - break; - } - - return ret; -} - -/** - * If reading the bayou_payload_table fails for some reason, then construct - * a dummy table. All valid payloads in the lar are added as chooser items. - */ -static void build_dummy_table(struct LAR *lar) -{ - bayoucfg.timeout = 0xFF; - bayoucfg.n_entries = 0; - - lar_walk_files(lar, add_payload); -} - -int get_configuration(struct LAR *lar) -{ - struct larstat stat; - struct bpt_config *bptcfg; - u8 *fptr, *ptr; - int i; - - /* - * If bayou_payload_table doesn't exist, then dummy up - * a table from the LAR contents. - */ - if (larstat(lar, "bayou_payload_table", &stat) || - !lfverify(lar, "bayou_payload_table")) - build_dummy_table(lar); - - /* Open up the BPT and get the creamy goodness within. */ - - fptr = larfptr(lar, "bayou_payload_table"); - - if (fptr == NULL) - build_dummy_table(lar); - - bptcfg = (struct bpt_config *)fptr; - bayoucfg.timeout = bptcfg->timeout; - - bayoucfg.n_entries = bptcfg->entries; - - if (bayoucfg.n_entries > BAYOU_MAX_ENTRIES) { - printf("W: Limiting the number of entries to %d\n", - BAYOU_MAX_ENTRIES); - bayoucfg.n_entries = BAYOU_MAX_ENTRIES; - } - - ptr = fptr + sizeof(struct bpt_config); - - for (i = 0; i < bayoucfg.n_entries; i++) { - struct bpt_pentry *entry = (struct bpt_pentry *)ptr; - struct payload *p = &(bayoucfg.entries[i]); - int plen; - u8 *params = NULL; - - memcpy(&p->pentry, entry, sizeof(struct bpt_pentry)); - - if (entry->type != BPT_TYPE_CHAIN) { - char *lname = (char *)ptr + sizeof(struct bpt_pentry); - - if (larstat(lar, (const char *)lname, &p->stat)) - build_dummy_table(lar); - - if (!lfverify(lar, (const char *)lname)) - build_dummy_table(lar); - - fptr = larfptr(lar, (const char *)lname); - - if (verify_self(fptr)) - p->fptr = fptr; - else - build_dummy_table(lar); - - plen = self_get_params(fptr, &params); - payload_parse_params(p, params, plen); - } - - ptr += sizeof(struct bpt_pentry) + entry->nlen; - } - - return 0; -} diff --git a/payloads/bayou/lzma.c b/payloads/bayou/lzma.c deleted file mode 100644 index 14bd921..0000000 --- a/payloads/bayou/lzma.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - -coreboot interface to memory-saving variant of LZMA decoder - -(C)opyright 2006 Carl-Daniel Hailfinger -Released under the GNU GPL v2 or later - -Parts of this file are based on C/7zip/Compress/LZMA_C/LzmaTest.c from the LZMA -SDK 4.42, which is written and distributed to public domain by Igor Pavlov. - -*/ - -#include <libpayload.h> -#include "lzmadecode.c" - -unsigned long ulzma(u8 *src, u8 *dst) -{ - unsigned char properties[LZMA_PROPERTIES_SIZE]; - UInt32 outSize; - SizeT inProcessed; - SizeT outProcessed; - int res; - CLzmaDecoderState state; - SizeT mallocneeds; - unsigned char scratchpad[15980]; - - memcpy(properties, src, LZMA_PROPERTIES_SIZE); - outSize = *(UInt32 *)(src + LZMA_PROPERTIES_SIZE); - if (LzmaDecodeProperties(&state.Properties, properties, LZMA_PROPERTIES_SIZE) != LZMA_RESULT_OK) { - printf("Incorrect stream properties\n"); - } - mallocneeds = (LzmaGetNumProbs(&state.Properties) * sizeof(CProb)); - if (mallocneeds > 15980) { - printf("Decoder scratchpad too small!\n"); - } - state.Probs = (CProb *)scratchpad; - res = LzmaDecode(&state, src + LZMA_PROPERTIES_SIZE + 8, (SizeT)0xffffffff, &inProcessed, - dst, outSize, &outProcessed); - if (res != 0) { - printf("Decoding error = %d\n", res); - } - return outSize; -} diff --git a/payloads/bayou/lzmadecode.c b/payloads/bayou/lzmadecode.c deleted file mode 100644 index b03415f..0000000 --- a/payloads/bayou/lzmadecode.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "lzmadecode.h" - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) -{ - unsigned char prop0; - if (size < LZMA_PROPERTIES_SIZE) - return LZMA_RESULT_DATA_ERROR; - prop0 = propsData[0]; - if (prop0 >= (9 * 5 * 5)) - return LZMA_RESULT_DATA_ERROR; - { - for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); - for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); - propsRes->lc = prop0; - /* - unsigned char remainder = (unsigned char)(prop0 / 9); - propsRes->lc = prop0 % 9; - propsRes->pb = remainder / 5; - propsRes->lp = remainder % 5; - */ - } - - return LZMA_RESULT_OK; -} - -#define kLzmaStreamWasFinishedId (-1) - -int LzmaDecode(CLzmaDecoderState *vs, - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) -{ - CProb *p = vs->Probs; - SizeT nowPos = 0; - Byte previousByte = 0; - UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; - UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; - int lc = vs->Properties.lc; - - - int state = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - int len = 0; - const Byte *Buffer; - const Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - *inSizeProcessed = 0; - *outSizeProcessed = 0; - - { - UInt32 i; - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - } - - RC_INIT(inStream, inSize); - - - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - matchByte = outStream[nowPos - rep0]; - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - UpdateBit0(prob); - - if (nowPos == 0) - return LZMA_RESULT_DATA_ERROR; - - state = state < kNumLitStates ? 9 : 11; - previousByte = outStream[nowPos - rep0]; - outStream[nowPos++] = previousByte; - - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = kLzmaStreamWasFinishedId; - break; - } - } - - len += kMatchMinLen; - if (rep0 > nowPos) - return LZMA_RESULT_DATA_ERROR; - - - do - { - previousByte = outStream[nowPos - rep0]; - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - - *inSizeProcessed = (SizeT)(Buffer - inStream); - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/payloads/bayou/lzmadecode.h b/payloads/bayou/lzmadecode.h deleted file mode 100644 index 3771245..0000000 --- a/payloads/bayou/lzmadecode.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef LZMADECODE_H -#define LZMADECODE_H - -typedef unsigned char Byte; -typedef unsigned short UInt16; -typedef unsigned int UInt32; -typedef UInt32 SizeT; - -#define CProb UInt16 - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -#define LZMA_PROPERTIES_SIZE 5 - -typedef struct _CLzmaProperties -{ - int lc; - int lp; - int pb; -}CLzmaProperties; - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); - -#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) - -#define kLzmaNeedInitId (-2) - -typedef struct _CLzmaDecoderState -{ - CLzmaProperties Properties; - CProb *Probs; - - -} CLzmaDecoderState; - - -int LzmaDecode(CLzmaDecoderState *vs, - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); - -#endif /* LZMADECODE_H */ diff --git a/payloads/bayou/main.c b/payloads/bayou/main.c deleted file mode 100644 index cdccea1..0000000 --- a/payloads/bayou/main.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" - -static void print_banner(void) -{ - printf("\e[H\e[JBayou Payload Chooser v0.3\n"); -} - -int main(void) -{ - extern unsigned long _binary_builtin_lar_start; - struct LAR *lar; - - print_banner(); - - lar = openlar((void *)&_binary_builtin_lar_start); - - if (lar == NULL) { - printf("[CHOOSER]: Unable to scan the attached LAR file\n"); - return -1; - } - - get_configuration(lar); - - if (bayoucfg.n_entries == 0) { - printf("[CHOOSER]: No payloads were found in the LAR\n"); - return -1; - } - - /* - * If timeout == 0xFF, then show the menu immediately. - * If timeout is zero, then find and run the default item immediately. - * If there is no default item, then show the menu. - * If timeout is anything else, then show a message and wait for a - * keystroke. If there is no keystroke in time then run the default. - * If there is no default then show the menu. - */ - if (bayoucfg.timeout != 0xFF) { - struct payload *d = payload_get_default(); - - if (d != NULL) { - if (bayoucfg.timeout == 0) - run_payload(d); - else - run_payload_timeout(d, bayoucfg.timeout); - } - } - - menu(); - - return 0; -} diff --git a/payloads/bayou/menu.c b/payloads/bayou/menu.c deleted file mode 100644 index 0d312ca..0000000 --- a/payloads/bayou/menu.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <libpayload.h> -#include <curses.h> -#include "bayou.h" - -#define SCREEN_X 80 -#define SCREEN_Y 25 - -static int menu_width = 0; -static struct payload *mpayloads[BAYOU_MAX_ENTRIES]; -static int m_entries = 0; -static unsigned int selected = 0; -static WINDOW *menuwin, *status; - -void create_menu(void) -{ - int i; - - for (i = 0; i < bayoucfg.n_entries; i++) { - struct payload *p = &(bayoucfg.entries[i]); - char *name; - - if ((p->pentry.parent != 0) || - (p->pentry.flags & BPT_FLAG_NOSHOW)) - continue; - - mpayloads[m_entries++] = p; - - name = payload_get_name(p); - - if (strlen(name) > menu_width) - menu_width = strlen(name); - } - - menu_width += 4; - - if (menu_width < 30) - menu_width = 30; - - menuwin = newwin(m_entries + 3, menu_width, - (SCREEN_Y - (m_entries + 3)) / 2, - (SCREEN_X - menu_width) / 2); -} - -void draw_menu(void) -{ - struct payload *s; - int i; - - wattrset(menuwin, COLOR_PAIR(3)); - wclear(menuwin); - wborder(menuwin, ACS_VLINE, ACS_VLINE, ACS_HLINE, ACS_HLINE, - ACS_ULCORNER, ACS_URCORNER, ACS_LLCORNER, ACS_LRCORNER); - - wattrset(menuwin, COLOR_PAIR(4) | A_BOLD); - mvwprintw(menuwin, 0, (menu_width - 17) / 2, " Payload Chooser "); - - wattrset(menuwin, COLOR_PAIR(3)); - - for (i = 0; i < m_entries; i++) { - char *name = payload_get_name(mpayloads[i]); - int col = (menu_width - (2 + strlen(name))) / 2; - - if (i == selected) - wattrset(menuwin, COLOR_PAIR(5) | A_BOLD); - else - wattrset(menuwin, COLOR_PAIR(3)); - - mvwprintw(menuwin, 2 + i, col, name); - } - - s = mpayloads[selected]; - - wclear(status); - - if (s->params[BAYOU_PARAM_DESC] != NULL) { - char buf[66]; - int len = strnlen(s->params[BAYOU_PARAM_DESC], 65); - - snprintf(buf, 65, s->params[BAYOU_PARAM_DESC]); - buf[65] = 0; - - mvwprintw(status, 0, (80 - len) / 2, buf); - } - - wrefresh(menuwin); - wrefresh(status); -} - -void loop(void) -{ - int key; - - while (1) { - key = getch(); - - if (key == ERR) - continue; - - if (key == KEY_DOWN) - selected = (selected + 1) % m_entries; - else if (key == KEY_UP) - selected = (selected - 1) % m_entries; - else if (key == KEY_ENTER) { - run_payload(mpayloads[selected]); - clear(); - refresh(); - } else - continue; - - draw_menu(); - } -} - -void menu(void) -{ - initscr(); - - init_pair(1, COLOR_WHITE, COLOR_RED); - init_pair(2, COLOR_BLACK, COLOR_WHITE); - init_pair(3, COLOR_BLACK, COLOR_WHITE); - init_pair(4, COLOR_CYAN, COLOR_WHITE); - init_pair(5, COLOR_WHITE, COLOR_RED); - - wattrset(stdscr, COLOR_PAIR(1)); - wclear(stdscr); - - status = newwin(1, 80, 24, 0); - wattrset(status, COLOR_PAIR(2)); - wclear(status); - - refresh(); - - create_menu(); - draw_menu(); - - loop(); -} diff --git a/payloads/bayou/nrv2b.c b/payloads/bayou/nrv2b.c deleted file mode 100644 index 53f7988..0000000 --- a/payloads/bayou/nrv2b.c +++ /dev/null @@ -1,86 +0,0 @@ -#include <libpayload.h> - -// This GETBIT is supposed to work on little endian -// 32bit systems. The algorithm will definitely need -// some fixing on other systems, but it might not be -// a problem since the nrv2b binary behaves the same.. - -#ifndef ENDIAN -#define ENDIAN 0 -#endif -#ifndef BITSIZE -#define BITSIZE 32 -#endif - -#define GETBIT_8(bb, src, ilen) \ - (((bb = bb & 0x7f ? bb*2 : ((unsigned)src[ilen++]*2+1)) >> 8) & 1) - -#define GETBIT_LE16(bb, src, ilen) \ - (bb*=2,bb&0xffff ? (bb>>16)&1 : (ilen+=2,((bb=(src[ilen-2]+src[ilen-1]*256u)*2+1)>>16)&1)) -#define GETBIT_LE32(bb, src, ilen) \ - (bc > 0 ? ((bb>>--bc)&1) : (bc=31,\ - bb=*(const u32 *)((src)+ilen),ilen+=4,(bb>>31)&1)) - -#if ENDIAN == 0 && BITSIZE == 8 -#define GETBIT(bb, src, ilen) GETBIT_8(bb, src, ilen) -#endif -#if ENDIAN == 0 && BITSIZE == 16 -#define GETBIT(bb, src, ilen) GETBIT_LE16(bb, src, ilen) -#endif -#if ENDIAN == 0 && BITSIZE == 32 -#define GETBIT(bb, src, ilen) GETBIT_LE32(bb, src, ilen) -#endif - -unsigned long unrv2b(u8 *src, u8 *dst, unsigned long *ilen_p) -{ - unsigned long ilen = 0, olen = 0, last_m_off = 1; - u32 bb = 0; - unsigned bc = 0; - const u8 *m_pos; - - // skip length - src += 4; - /* FIXME: check olen with the length stored in first 4 bytes */ - - for (;;) { - unsigned int m_off, m_len; - while (GETBIT(bb, src, ilen)) { - dst[olen++] = src[ilen++]; - } - - m_off = 1; - do { - m_off = m_off * 2 + GETBIT(bb, src, ilen); - } while (!GETBIT(bb, src, ilen)); - if (m_off == 2) { - m_off = last_m_off; - } else { - m_off = (m_off - 3) * 256 + src[ilen++]; - if (m_off == 0xffffffffU) - break; - last_m_off = ++m_off; - } - - m_len = GETBIT(bb, src, ilen); - m_len = m_len * 2 + GETBIT(bb, src, ilen); - if (m_len == 0) { - m_len++; - do { - m_len = m_len * 2 + GETBIT(bb, src, ilen); - } while (!GETBIT(bb, src, ilen)); - m_len += 2; - } - m_len += (m_off > 0xd00); - - m_pos = dst + olen - m_off; - dst[olen++] = *m_pos++; - do { - dst[olen++] = *m_pos++; - } while (--m_len > 0); - } - - *ilen_p = ilen; - - return olen; - -} diff --git a/payloads/bayou/payload.c b/payloads/bayou/payload.c deleted file mode 100644 index a76e49f..0000000 --- a/payloads/bayou/payload.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" - -#define TIMEOUT_MESSAGE "Press ESC for the menu (%2d)...\r" -#define TIMEOUT_KEY '\033' - -void run_payload(struct payload *p) -{ - int ret, i; - - /* For chooser entries, just run the payload. */ - if (p->pentry.type == BPT_TYPE_CHOOSER) { - self_load_and_run(p, &ret); - return; - } - - /* For chained entries, run all the sub-chain items. */ - for (i = 0; i < bayoucfg.n_entries; i++) { - struct payload *s = &(bayoucfg.entries[i]); - - if (s->pentry.parent == p->pentry.index) - self_load_and_run(s, &ret); - } -} - -char *payload_get_name(struct payload *p) -{ - if (p->pentry.type == BPT_TYPE_CHAIN) - return (char *)p->pentry.title; - else if (p->pentry.type == BPT_TYPE_CHOOSER) { - if (p->pentry.title[0] != 0) - return (char *)p->pentry.title; - return p->params[BAYOU_PARAM_DESC]; - } - - return NULL; -} - -struct payload *payload_get_default(void) -{ - int i; - - for (i = 0; i < bayoucfg.n_entries; i++) { - struct payload *s = &(bayoucfg.entries[i]); - - if (s->pentry.parent == 0 && s->pentry.flags & BPT_FLAG_DEFAULT) - return s; - } - - return NULL; -} - -void run_payload_timeout(struct payload *p, int timeout) -{ - int t, ch, tval; - - for (t = timeout; t >= 0; t--) { - printf(TIMEOUT_MESSAGE, t); - - tval = 1000; - ch = getchar_timeout(&tval); - - if (ch == TIMEOUT_KEY) - return; - } - - run_payload(p); -} - -void payload_parse_params(struct payload *pload, u8 *params, int len) -{ - char *ptr = (char *)params; - int i = 0; - - if (ptr == NULL) - return; - - while (ptr < ((char *)params + len)) { - - if (!strncmp(ptr, "name=", 5)) { - pload->params[BAYOU_PARAM_NAME] = ptr + 5; - } else if (!strncmp(ptr, "desc=", 5)) { - pload->params[BAYOU_PARAM_DESC] = ptr + 5; - } else if (!strncmp(ptr, "listname=", 9)) { - pload->params[BAYOU_PARAM_LIST] = ptr + 9; - } - - ptr += strnlen(ptr, len - i); - - if (ptr < ((char *)params + len) && *ptr == 0) - ptr++; - } -} diff --git a/payloads/bayou/self.c b/payloads/bayou/self.c deleted file mode 100644 index 88e495b17..0000000 --- a/payloads/bayou/self.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "bayou.h" -#include "self.h" - -static int nop_decompress(void *dst, void *src, int len) -{ - memcpy(dst, src, len); - return len; -} - -#ifdef CONFIG_LZMA -extern int ulzma(u8 *, u8 *); - -static int lzma_decompress(void *dst, void *src, int len) -{ - return ulzma((u8 *) src, (u8 *) dst); -} -#endif - -#ifdef CONFIG_NRV2B -extern int unrv2b(u8 *, u8 *, unsigned long *); - -static int nrv2b_decompress(void *dst, void *src, int len) -{ - unsigned long l = (u32) len; - return unrv2b(src, dst, &l); -} -#endif - -static int zeros_decompress(void *dst, void *src, int len) -{ - memset(dst, 0, len); - return len; -} - -int self_get_params(u8 *fptr, u8 **params) -{ - struct self_segment *seg = (struct self_segment *)fptr; - - while (seg->type != SELF_TYPE_ENTRY) { - if (seg->type == 0) - return -1; - - if (seg->type == SELF_TYPE_PARAMS) { - *params = (u8 *) (fptr + seg->offset); - return seg->len; - } - - seg++; - } - - *params = NULL; - - return 0; -} - -int verify_self(u8 *ptr) -{ - struct self_segment *seg = (struct self_segment *)ptr; - - switch (seg->type) { - case SELF_TYPE_CODE: - case SELF_TYPE_DATA: - case SELF_TYPE_BSS: - case SELF_TYPE_PARAMS: - case SELF_TYPE_ENTRY: - return 1; - } - - return 0; -} - -int self_load_and_run(struct payload *p, int *ret) -{ - struct self_segment *seg = (struct self_segment *)p->fptr; - int (*dcmp) (void *, void *, int); - int dlen; - - switch (p->stat.compression) { -#ifdef CONFIG_LZMA - case ALGO_LZMA: - dcmp = lzma_decompress; - break; -#endif -#ifdef CONFIG_NRV2B - case ALGO_NRV2B: - dcmp = nrv2b_decompress; - break; -#endif - case ALGO_ZEROES: - dcmp = zeros_decompress; - break; - case ALGO_NONE: - dcmp = nop_decompress; - default: - printf("E: Unsupported decompression type\n"); - return -1; - } - - while (1) { - u32 laddr = (u32) (seg->load_addr & 0xFFFFFFFF); - - switch (seg->type) { - case SELF_TYPE_CODE: - case SELF_TYPE_DATA: - dlen = dcmp((void *)laddr, - (void *)p->fptr + seg->offset, seg->len); - - if (dlen < seg->mem_len) { - memset((void *)(laddr + dlen), 0, - seg->mem_len - dlen); - } - break; - - case SELF_TYPE_BSS: - memset((void *)laddr, 0, seg->len); - break; - case SELF_TYPE_ENTRY: - *ret = exec(laddr, 0, NULL); - return 0; - default: - break; - } - - seg++; - } - - return -1; -} diff --git a/payloads/bayou/self.h b/payloads/bayou/self.h deleted file mode 100644 index a341899..0000000 --- a/payloads/bayou/self.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of the bayou project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef SELF_H_ -#define SELF_H_ - -#include <libpayload.h> - -struct self_segment { - u32 type; - u32 offset; - u64 load_addr; - u32 len; - u32 mem_len; -}; - -struct self { - struct larstat stat; - void *fptr; -}; - -#define SELF_TYPE_CODE 0x45444F43 -#define SELF_TYPE_DATA 0x41544144 -#define SELF_TYPE_BSS 0x20535342 -#define SELF_TYPE_PARAMS 0x41524150 -#define SELF_TYPE_ENTRY 0x52544E45 - -#endif -- To view, visit https://review.coreboot.org/c/coreboot/+/34565 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: Icfb18b88e460a4e4b538b7efe907d4eef6c40638 Gerrit-Change-Number: 34565 Gerrit-PatchSet: 1 Gerrit-Owner: Angel Pons <th3fanbus(a)gmail.com> Gerrit-MessageType: newchange

5 11

Change in coreboot[master]: riscv: Implement ipi using clint for emulation to enable smp in qemu.
by Philipp Hug (Code Review) 06 Dec '19

06 Dec '19

Philipp Hug has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35246 ) Change subject: riscv: Implement ipi using clint for emulation to enable smp in qemu. ...................................................................... riscv: Implement ipi using clint for emulation to enable smp in qemu. testing=Set MAX_CPUS=2 and run qemu with -smp 2 Change-Id: I94fb25fad103e3cb5db676eb4caead11d54ae0ae --- M src/mainboard/emulation/qemu-riscv/Makefile.inc M src/mainboard/emulation/qemu-riscv/clint.c M src/mainboard/emulation/spike-riscv/Makefile.inc M src/mainboard/emulation/spike-riscv/clint.c M src/soc/ucb/riscv/Makefile.inc D src/soc/ucb/riscv/ipi.c 6 files changed, 14 insertions(+), 25 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/46/35246/1 diff --git a/src/mainboard/emulation/qemu-riscv/Makefile.inc b/src/mainboard/emulation/qemu-riscv/Makefile.inc index eb99544..2ca75fd 100644 --- a/src/mainboard/emulation/qemu-riscv/Makefile.inc +++ b/src/mainboard/emulation/qemu-riscv/Makefile.inc @@ -19,6 +19,7 @@ romstage-y += romstage.c romstage-y += uart.c romstage-y += rom_media.c +romstage-y += clint.c ramstage-y += uart.c ramstage-y += rom_media.c diff --git a/src/mainboard/emulation/qemu-riscv/clint.c b/src/mainboard/emulation/qemu-riscv/clint.c index 367d48d..4a00bc2 100644 --- a/src/mainboard/emulation/qemu-riscv/clint.c +++ b/src/mainboard/emulation/qemu-riscv/clint.c @@ -14,6 +14,7 @@ */ #include <mcall.h> +#include <device/mmio.h> #include <mainboard/addressmap.h> /* This function is used to initialize HLS()->time/HLS()->timecmp */ @@ -23,3 +24,8 @@ HLS()->time = (uint64_t *)(QEMU_VIRT_CLINT + 0xbff8); HLS()->timecmp = (uint64_t *)(QEMU_VIRT_CLINT + 0x4000 + 8 * hart_id); } + +void set_msip(int hartid, int val) +{ + write32((void *)(QEMU_VIRT_CLINT + 4 * (uintptr_t)hartid), !!val); +} diff --git a/src/mainboard/emulation/spike-riscv/Makefile.inc b/src/mainboard/emulation/spike-riscv/Makefile.inc index 38977b6..bfeaf58 100644 --- a/src/mainboard/emulation/spike-riscv/Makefile.inc +++ b/src/mainboard/emulation/spike-riscv/Makefile.inc @@ -18,6 +18,7 @@ romstage-y += romstage.c romstage-y += uart.c romstage-y += rom_media.c +romstage-y += clint.c ramstage-y += uart.c ramstage-y += rom_media.c ramstage-y += clint.c diff --git a/src/mainboard/emulation/spike-riscv/clint.c b/src/mainboard/emulation/spike-riscv/clint.c index 7ad3f5a..c39e058 100644 --- a/src/mainboard/emulation/spike-riscv/clint.c +++ b/src/mainboard/emulation/spike-riscv/clint.c @@ -14,6 +14,7 @@ */ #include <mcall.h> +#include <device/mmio.h> #define SPIKE_CLINT_BASE 0x02000000 @@ -24,3 +25,8 @@ HLS()->time = (uint64_t *)(SPIKE_CLINT_BASE + 0xbff8); HLS()->timecmp = (uint64_t *)(SPIKE_CLINT_BASE + 0x4000 + 8 * hart_id); } + +void set_msip(int hartid, int val) +{ + write32((void *)(SPIKE_CLINT_BASE + 4 * (uintptr_t)hartid), !!val); +} diff --git a/src/soc/ucb/riscv/Makefile.inc b/src/soc/ucb/riscv/Makefile.inc index ef03642..80899d57 100644 --- a/src/soc/ucb/riscv/Makefile.inc +++ b/src/soc/ucb/riscv/Makefile.inc @@ -1,11 +1,7 @@ ifeq ($(CONFIG_SOC_UCB_RISCV),y) -bootblock-y += ipi.c - romstage-y += cbmem.c -romstage-y += ipi.c ramstage-y += cbmem.c -ramstage-y += ipi.c endif diff --git a/src/soc/ucb/riscv/ipi.c b/src/soc/ucb/riscv/ipi.c deleted file mode 100644 index 80307a8..0000000 --- a/src/soc/ucb/riscv/ipi.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2018 HardenedLinux - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <mcall.h> - -/* TODO: Please implement this function */ -void set_msip(int hartid, int val) -{ -} -- To view, visit https://review.coreboot.org/c/coreboot/+/35246 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I94fb25fad103e3cb5db676eb4caead11d54ae0ae Gerrit-Change-Number: 35246 Gerrit-PatchSet: 1 Gerrit-Owner: Philipp Hug <philipp(a)hug.cx> Gerrit-MessageType: newchange

4 14

Change in coreboot[master]: sc7180: Add USB support
by mturney mturney (Code Review) 05 Dec '19

05 Dec '19

mturney mturney has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35503 ) Change subject: sc7180: Add USB support ...................................................................... sc7180: Add USB support This includes USB QUSB2,QMP Phy and Controller support And libpayload support for USB Change-Id: I0651fc28dc227efbeb23eeefe9b96a3b940ae995 Signed-off-by: Sandeep Maheswaram <sanm(a)codeaurora.org> --- M payloads/libpayload/configs/config.trogdor M src/mainboard/google/trogdor/mainboard.c M src/mainboard/google/trogdor/romstage.c M src/soc/qualcomm/sc7180/Makefile.inc M src/soc/qualcomm/sc7180/include/soc/addressmap.h M src/soc/qualcomm/sc7180/include/soc/clock.h A src/soc/qualcomm/sc7180/include/soc/efuse.h A src/soc/qualcomm/sc7180/include/soc/usb.h A src/soc/qualcomm/sc7180/usb.c 9 files changed, 931 insertions(+), 8 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/03/35503/1 diff --git a/payloads/libpayload/configs/config.trogdor b/payloads/libpayload/configs/config.trogdor index 0625ff5..7ca654b 100644 --- a/payloads/libpayload/configs/config.trogdor +++ b/payloads/libpayload/configs/config.trogdor @@ -3,3 +3,6 @@ CONFIG_LP_TIMER_ARM64_ARCH=y CONFIG_LP_SERIAL_CONSOLE=y CONFIG_LP_SC7180_SERIAL_CONSOLE=y +CONFIG_LP_USB=y +CONFIG_LP_USB_EHCI=y +CONFIG_LP_USB_XHCI=y diff --git a/src/mainboard/google/trogdor/mainboard.c b/src/mainboard/google/trogdor/mainboard.c index dbdb4ed..170955a 100644 --- a/src/mainboard/google/trogdor/mainboard.c +++ b/src/mainboard/google/trogdor/mainboard.c @@ -19,10 +19,23 @@ #include <gpio.h> #include <timestamp.h> #include <soc/qupv3_fw_config.h> +#include <soc/usb.h> + +static struct usb_board_data usb0_board_data = { + .pll_bias_control_2 = 0x22, + .imp_ctrl1 = 0x08, + .port_tune1 = 0xc5, +}; + +static void setup_usb(void) +{ + setup_usb_host0(&usb0_board_data); +} static void mainboard_init(struct device *dev) { qupv3_fw_init(); + setup_usb(); } static void mainboard_enable(struct device *dev) diff --git a/src/mainboard/google/trogdor/romstage.c b/src/mainboard/google/trogdor/romstage.c index 7185387..872798a 100644 --- a/src/mainboard/google/trogdor/romstage.c +++ b/src/mainboard/google/trogdor/romstage.c @@ -14,10 +14,22 @@ */ #include <arch/stages.h> +#include <soc/usb.h> #include <soc/qclib_common.h> +static void prepare_usb(void) +{ + /* + * Do DWC3 core and phy reset. Kick these resets + * off early so they get at least 1ms to settle. + */ + reset_usb0(); +} + void platform_romstage_main(void) { + prepare_usb(); + /* QCLib: DDR init & train */ qclib_load_and_run(); } diff --git a/src/soc/qualcomm/sc7180/Makefile.inc b/src/soc/qualcomm/sc7180/Makefile.inc index d8fc33a..8db260d 100644 --- a/src/soc/qualcomm/sc7180/Makefile.inc +++ b/src/soc/qualcomm/sc7180/Makefile.inc @@ -28,6 +28,8 @@ romstage-y += timer.c romstage-y += gpio.c romstage-y += ../common/qclib.c +romstage-y += qclib.c +romstage-y += usb.c romstage-y += ../common/mmu.c romstage-y += mmu.c romstage-y += spi.c @@ -49,6 +51,7 @@ ramstage-$(CONFIG_DRIVERS_UART) += uart.c ramstage-$(CONFIG_SC7180_QSPI) += qspi.c ramstage-y += aop_load_reset.c +ramstage-y += usb.c ################################################################################ diff --git a/src/soc/qualcomm/sc7180/include/soc/addressmap.h b/src/soc/qualcomm/sc7180/include/soc/addressmap.h index 1a24d94..ae6bb6b 100644 --- a/src/soc/qualcomm/sc7180/include/soc/addressmap.h +++ b/src/soc/qualcomm/sc7180/include/soc/addressmap.h @@ -46,4 +46,16 @@ #define QUP_SERIAL10_BASE 0xA90000 #define QUP_SERIAL11_BASE 0xA94000 +/* + * USB BASE ADDRESSES + */ +#define QFPROM_BASE 0x00780000 +#define QUSB_PRIM_PHY_BASE 0x088e3000 +#define QUSB_PRIM_PHY_DIG_BASE 0x088e3200 +#define QMP_PHY_QSERDES_COM_REG_BASE 0x088e9000 +#define QMP_PHY_QSERDES_TX_REG_BASE 0x088e9200 +#define QMP_PHY_QSERDES_RX_REG_BASE 0x088e9400 +#define QMP_PHY_PCS_REG_BASE 0x088e9c00 +#define USB_HOST_DWC3_BASE 0x0a60c100 + #endif /* __SOC_QUALCOMM_SC7180_ADDRESS_MAP_H__ */ diff --git a/src/soc/qualcomm/sc7180/include/soc/clock.h b/src/soc/qualcomm/sc7180/include/soc/clock.h index d90779b..ae9abd2 100644 --- a/src/soc/qualcomm/sc7180/include/soc/clock.h +++ b/src/soc/qualcomm/sc7180/include/soc/clock.h @@ -76,7 +76,7 @@ struct sc7180_gpll gpll0; u8 _res0[0xf000 - 0x1000]; u32 usb30_prim_bcr; - u8 _res3[0x17000 - 0xf004]; + u8 _res1[0x17000 - 0xf004]; u32 qup_wrap0_bcr; u32 qup_wrap0_m_ahb_cbcr; u32 qup_wrap0_s_ahb_cbcr; @@ -84,33 +84,39 @@ u32 qup_wrap0_core_cdivr; u32 qup_wrap0_core_2x_cbcr; struct sc7180_rcg qup_wrap0_core_2x; - u8 _res4[0x17030 - 0x17020]; + u8 _res2[0x17030 - 0x17020]; struct sc7180_qupv3_clock qup_wrap0_s[6]; - u8 _res5[0x18000 - 0x17750]; + u8 _res3[0x18000 - 0x17750]; u32 qup_wrap1_bcr; u32 qup_wrap1_core_2x_cbcr; u32 qup_wrap1_core_cbcr; u32 qup_wrap1_m_ahb_cbcr; u32 qup_wrap1_s_ahb_cbcr; struct sc7180_qupv3_clock qup_wrap1_s[6]; - u8 _res6[0x18994 - 0x18734]; + u8 _res4[0x18994-0x18734]; u32 qup_wrap1_core_cdivr; - u8 _res7[0x4b000 - 0x18998]; + u8 _res5[0x26000-0x18998]; + u32 qusb2phy_prim_bcr; + u8 _res6[0x4B000 - 0x26004]; u32 qspi_bcr; u32 qspi_cnoc_ahb_cbcr; u32 qspi_core_cbcr; struct sc7180_rcg qspi_core; - u8 _res8[0x50000 - 0x4b014]; + u8 _res7[0x50000-0x4b014]; u32 usb3_phy_prim_bcr; u32 usb3phy_phy_prim_bcr; u32 usb3_dp_phy_prim_bcr; u32 usb3_phy_sec_bcr; u32 usb3phy_phy_sec_bcr; u32 usb3_dp_phy_sec_bcr; - u8 _res9[0x52008 - 0x50018]; + u8 _res8[0x52008-0x50018]; u32 apcs_clk_br_en1; - u8 _res10[0x1000000 - 0x5200c]; + u8 _res9[0x1000000-0x5200c]; }; +check_member(sc7180_gcc, usb30_prim_bcr, 0xf000); +check_member(sc7180_gcc, qusb2phy_prim_bcr, 0x26000); +check_member(sc7180_gcc, usb3phy_phy_prim_bcr, 0x50004); +check_member(sc7180_gcc, usb3_phy_prim_bcr, 0x50000); struct sc7180_aoss { u8 _res[0x5002c]; diff --git a/src/soc/qualcomm/sc7180/include/soc/efuse.h b/src/soc/qualcomm/sc7180/include/soc/efuse.h new file mode 100644 index 0000000..baaa971 --- /dev/null +++ b/src/soc/qualcomm/sc7180/include/soc/efuse.h @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2019 Qualcomm Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __SOC_QUALCOMM_SC7180_EFUSE_ADDRESS_MAP_H__ +#define __SOC_QUALCOMM_SC7180_EFUSE_ADDRESS_MAP_H__ + +/** + * USB EFUSE registers + */ +struct qfprom_corr { + u8 rsvd[0x4258 - 0x0]; + u32 qusb_hstx_trim_lsb; +}; +check_member(qfprom_corr, qusb_hstx_trim_lsb, 0x4258); + +#endif /* __SOC_QUALCOMM_SC7180_EFUSE_ADDRESS_MAP_H__ */ diff --git a/src/soc/qualcomm/sc7180/include/soc/usb.h b/src/soc/qualcomm/sc7180/include/soc/usb.h new file mode 100644 index 0000000..3a8816a --- /dev/null +++ b/src/soc/qualcomm/sc7180/include/soc/usb.h @@ -0,0 +1,96 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2019 Qualcomm Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <types.h> + +#ifndef _SC7180_USB_H_ +#define _SC7180_USB_H_ + +/* QSCRATCH_GENERAL_CFG register bit offset */ +#define PIPE_UTMI_CLK_SEL BIT(0) +#define PIPE3_PHYSTATUS_SW BIT(3) +#define PIPE_UTMI_CLK_DIS BIT(8) + +/* Global USB3 Control Registers */ +#define DWC3_GUSB3PIPECTL_DELAYP1TRANS BIT(18) +#define DWC3_GUSB3PIPECTL_UX_EXIT_IN_PX BIT(27) +#define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12) +#define DWC3_GCTL_PRTCAP_OTG 3 +#define DWC3_GCTL_PRTCAP_HOST 1 + +/* Global USB2 PHY Configuration Register */ +#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) ((n) << 10) +#define DWC3_GUSB2PHYCFG_USB2TRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf) +#define DWC3_GUSB2PHYCFG_PHYIF(n) ((n) << 3) +#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1) +#define USBTRDTIM_UTMI_8_BIT 9 +#define UTMI_PHYIF_8_BIT 0 + +#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4) +#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3) +#define DWC3_GCTL_DISSCRAMBLE (1 << 3) +#define DWC3_GCTL_U2EXIT_LFPS (1 << 2) +#define DWC3_GCTL_DSBLCLKGTNG (1 << 0) + +#define PORT_TUNE1_MASK 0xf0 + +/* QUSB2PHY_PWR_CTRL1 register related bits */ +#define POWER_DOWN BIT(0) + +/* DEBUG_CTRL2 register value to program VSTATUS MUX for PHY status */ +#define DEBUG_CTRL2_MUX_PLL_LOCK_STATUS 0x4 + +/* STAT5 register bits */ +#define VSTATUS_PLL_LOCK_STATUS_MASK BIT(0) + +/* QUSB PHY register values */ +#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x03 +#define QUSB2PHY_PLL_CLOCK_INVERTERS 0x7c +#define QUSB2PHY_PLL_CMODE 0x80 +#define QUSB2PHY_PLL_LOCK_DELAY 0x0a +#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0x19 +#define QUSB2PHY_PLL_BIAS_CONTROL_1 0x40 +#define QUSB2PHY_PLL_BIAS_CONTROL_2 0x22 +#define QUSB2PHY_PWR_CTRL2 0x21 +#define QUSB2PHY_IMP_CTRL1 0x08 +#define QUSB2PHY_IMP_CTRL2 0x58 +#define QUSB2PHY_PORT_TUNE1 0xc5 +#define QUSB2PHY_PORT_TUNE2 0x29 +#define QUSB2PHY_PORT_TUNE3 0xca +#define QUSB2PHY_PORT_TUNE4 0x04 +#define QUSB2PHY_PORT_TUNE5 0x03 +#define QUSB2PHY_CHG_CTRL2 0x30 + +/* USB3PHY_PCIE_USB3_PCS_PCS_STATUS bit */ +#define USB3_PCS_PHYSTATUS BIT(6) + +struct usb_board_data { + /* Register values going to override from the boardfile */ + u32 pll_bias_control_2; + u32 imp_ctrl1; + u32 port_tune1; +}; + +struct qmp_phy_init_tbl { + u32 *address; + u32 val; +}; + +void setup_usb_host0(struct usb_board_data *data); + +/* Call reset_ before setup_ */ +void reset_usb0(void); + + +#endif /* _SC7180_USB_H_ */ diff --git a/src/soc/qualcomm/sc7180/usb.c b/src/soc/qualcomm/sc7180/usb.c new file mode 100644 index 0000000..7c65830 --- /dev/null +++ b/src/soc/qualcomm/sc7180/usb.c @@ -0,0 +1,750 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2019 Qualcomm Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/mmio.h> +#include <stdlib.h> +#include <console/console.h> +#include <delay.h> +#include <soc/usb.h> +#include <soc/clock.h> +#include <soc/addressmap.h> +#include <soc/efuse.h> +#include <timer.h> + +struct usb_qusb_phy_dig { + u8 rsvd1[16]; + u32 pwr_ctrl1; + u32 pwr_ctrl2; + u8 rsvd2[8]; + u32 imp_ctrl1; + u32 imp_ctrl2; + u8 rsvd3[20]; + u32 chg_ctrl2; + u32 tune1; + u32 tune2; + u32 tune3; + u32 tune4; + u32 tune5; + u8 rsvd4[44]; + u32 debug_ctrl2; + u8 rsvd5[28]; + u32 debug_stat5; +}; +check_member(usb_qusb_phy_dig, tune5, 0x50); +check_member(usb_qusb_phy_dig, debug_ctrl2, 0x80); +check_member(usb_qusb_phy_dig, debug_stat5, 0xA0); + +struct usb_qusb_phy_pll { + u8 rsvd0[4]; + u32 analog_controls_two; + u8 rsvd1[36]; + u32 cmode; + u8 rsvd2[132]; + u32 dig_tim; + u8 rsvd3[204]; + u32 lock_delay; + u8 rsvd4[4]; + u32 clock_inverters; + u8 rsvd5[4]; + u32 bias_ctrl_1; + u32 bias_ctrl_2; +}; +check_member(usb_qusb_phy_pll, cmode, 0x2C); +check_member(usb_qusb_phy_pll, bias_ctrl_2, 0x198); +check_member(usb_qusb_phy_pll, dig_tim, 0xB4); + +/* Only for QMP V3 PHY - QSERDES COM registers */ +struct usb3_phy_qserdes_com_reg_layout { + u8 _reserved1[16]; + u32 com_ssc_en_center; + u32 com_ssc_adj_per1; + u32 com_ssc_adj_per2; + u32 com_ssc_per1; + u32 com_ssc_per2; + u32 com_ssc_step_size1; + u32 com_ssc_step_size2; + u8 _reserved2[8]; + u32 com_bias_en_clkbuflr_en; + u32 com_sys_clk_enable1; + u32 com_sys_clk_ctrl; + u32 com_sysclk_buf_enable; + u32 com_pll_en; + u32 com_pll_ivco; + u8 _reserved3[20]; + u32 com_cp_ctrl_mode0; + u8 _reserved4[4]; + u32 com_pll_rctrl_mode0; + u8 _reserved5[4]; + u32 com_pll_cctrl_mode0; + u8 _reserved6[12]; + u32 com_sysclk_en_sel; + u8 _reserved7[8]; + u32 com_resetsm_ctrl2; + u32 com_lock_cmp_en; + u32 com_lock_cmp_cfg; + u32 com_lock_cmp1_mode0; + u32 com_lock_cmp2_mode0; + u32 com_lock_cmp3_mode0; + u8 _reserved8[12]; + u32 com_dec_start_mode0; + u8 _reserved9[4]; + u32 com_div_frac_start1_mode0; + u32 com_div_frac_start2_mode0; + u32 com_div_frac_start3_mode0; + u8 _reserved10[20]; + u32 com_integloop_gain0_mode0; + u32 com_integloop_gain1_mode0; + u8 _reserved11[16]; + u32 com_vco_tune_map; + u32 com_vco_tune1_mode0; + u32 com_vco_tune2_mode0; + u8 _reserved12[60]; + u32 com_clk_select; + u32 com_hsclk_sel; + u8 _reserved13[8]; + u32 com_coreclk_div_mode0; + u8 _reserved14[8]; + u32 com_core_clk_en; + u32 com_c_ready_status; + u32 com_cmn_config; + u32 com_cmn_rate_override; + u32 com_svs_mode_clk_sel; +}; +check_member(usb3_phy_qserdes_com_reg_layout, com_ssc_en_center, 0x010); +check_member(usb3_phy_qserdes_com_reg_layout, com_ssc_adj_per1, 0x014); +check_member(usb3_phy_qserdes_com_reg_layout, com_ssc_adj_per2, 0x018); +check_member(usb3_phy_qserdes_com_reg_layout, com_ssc_per1, 0x01c); +check_member(usb3_phy_qserdes_com_reg_layout, com_ssc_per2, 0x020); +check_member(usb3_phy_qserdes_com_reg_layout, com_bias_en_clkbuflr_en, 0x034); +check_member(usb3_phy_qserdes_com_reg_layout, com_pll_ivco, 0x048); +check_member(usb3_phy_qserdes_com_reg_layout, com_cp_ctrl_mode0, 0x060); +check_member(usb3_phy_qserdes_com_reg_layout, com_sysclk_en_sel, 0x080); +check_member(usb3_phy_qserdes_com_reg_layout, com_resetsm_ctrl2, 0x08c); +check_member(usb3_phy_qserdes_com_reg_layout, com_dec_start_mode0, 0x0b0); +check_member(usb3_phy_qserdes_com_reg_layout, com_div_frac_start1_mode0, 0x0b8); +check_member(usb3_phy_qserdes_com_reg_layout, com_integloop_gain0_mode0, 0x0d8); +check_member(usb3_phy_qserdes_com_reg_layout, com_vco_tune_map, 0x0f0); +check_member(usb3_phy_qserdes_com_reg_layout, com_clk_select, 0x138); +check_member(usb3_phy_qserdes_com_reg_layout, com_coreclk_div_mode0, 0x148); +check_member(usb3_phy_qserdes_com_reg_layout, com_core_clk_en, 0x154); +check_member(usb3_phy_qserdes_com_reg_layout, com_svs_mode_clk_sel, 0x164); + +/* Only for QMP V3 PHY - TX registers */ +struct usb3_phy_qserdes_tx_reg_layout { + u8 _reserved1[68]; + u32 tx_res_code_lane_offset_tx; + u32 tx_res_code_lane_offset_rx; + u8 _reserved2[20]; + u32 tx_highz_drvr_en; + u8 _reserved3[40]; + u32 tx_lane_mode_1; + u8 _reserved4[20]; + u32 tx_rcv_detect_lvl_2; +}; +check_member(usb3_phy_qserdes_tx_reg_layout, tx_res_code_lane_offset_tx, 0x044); +check_member(usb3_phy_qserdes_tx_reg_layout, tx_res_code_lane_offset_rx, 0x048); +check_member(usb3_phy_qserdes_tx_reg_layout, tx_highz_drvr_en, 0x060); +check_member(usb3_phy_qserdes_tx_reg_layout, tx_lane_mode_1, 0x08c); +check_member(usb3_phy_qserdes_tx_reg_layout, tx_rcv_detect_lvl_2, 0x0a4); + +/* Only for QMP V3 PHY - RX registers */ +struct usb3_phy_qserdes_rx_reg_layout { + u8 _reserved1[8]; + u32 rx_ucdr_fo_gain; + u32 rx_ucdr_so_gain_half; + u8 _reserved2[32]; + u32 rx_ucdr_fastlock_fo_gain; + u32 rx_ucdr_so_saturtn_and_en; + u8 _reserved3[12]; + u32 rx_ucdr_pi_cntrls; + u8 _reserved4[120]; + u32 rx_vga_cal_ctrl2; + u8 _reserved5[16]; + u32 rx_rx_equ_adap_ctrl2; + u32 rx_rx_equ_adap_ctrl3; + u32 rx_rx_equ_adap_ctrl4; + u8 _reserved6[24]; + u32 rx_rx_eq_offset_adap_ctrl1; + u32 rx_rx_offset_adap_ctrl2; + u32 rx_sigdet_enables; + u32 rx_sigdet_ctrl; + u8 _reserved7[4]; + u32 rx_sigdet_deglitch_ctrl; + u32 rx_rx_band; + u8 _reserved8[80]; + u32 rx_rx_mode_00; +}; +check_member(usb3_phy_qserdes_rx_reg_layout, rx_ucdr_fo_gain, 0x008); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_ucdr_so_gain_half, 0x00c); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_ucdr_fastlock_fo_gain, 0x030); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_ucdr_so_saturtn_and_en, 0x034); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_ucdr_pi_cntrls, 0x044); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_vga_cal_ctrl2, 0x0c0); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_equ_adap_ctrl2, 0x0d4); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_equ_adap_ctrl3, 0x0d8); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_equ_adap_ctrl4, 0x0dc); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_eq_offset_adap_ctrl1, 0x0f8); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_offset_adap_ctrl2, 0x0fc); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_sigdet_enables, 0x100); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_sigdet_ctrl, 0x104); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_sigdet_deglitch_ctrl, 0x10c); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_band, 0x110); +check_member(usb3_phy_qserdes_rx_reg_layout, rx_rx_mode_00, 0x164); + +/* Only for QMP V3 PHY - PCS registers */ +struct usb3_phy_pcs_reg_layout { + u32 pcs_sw_reset; + u32 pcs_power_down_control; + u32 pcs_start_control; + u32 pcs_txmgn_v0; + u32 pcs_txmgn_v1; + u32 pcs_txmgn_v2; + u32 pcs_txmgn_v3; + u32 pcs_txmgn_v4; + u32 pcs_txmgn_ls; + u32 pcs_txdeemph_m6db_v0; + u32 pcs_txdeemph_m3p5db_v0; + u32 pcs_txdeemph_m6db_v1; + u32 pcs_txdeemph_m3p5db_v1; + u32 pcs_txdeemph_m6db_v2; + u32 pcs_txdeemph_m3p5db_v2; + u32 pcs_txdeemph_m6db_v3; + u32 pcs_txdeemph_m3p5db_v3; + u32 pcs_txdeemph_m6db_v4; + u32 pcs_txdeemph_m3p5db_v4; + u32 pcs_txdeemph_m6db_ls; + u32 pcs_txdeemph_m3p5db_ls; + u8 _reserved1[8]; + u32 pcs_rate_slew_cntrl; + u8 _reserved2[4]; + u32 pcs_power_state_config2; + u8 _reserved3[8]; + u32 pcs_rcvr_dtct_dly_p1u2_l; + u32 pcs_rcvr_dtct_dly_p1u2_h; + u32 pcs_rcvr_dtct_dly_u3_l; + u32 pcs_rcvr_dtct_dly_u3_h; + u32 pcs_lock_detect_config1; + u32 pcs_lock_detect_config2; + u32 pcs_lock_detect_config3; + u32 pcs_tsync_rsync_time; + u8 _reserved4[16]; + u32 pcs_pwrup_reset_dly_time_auxclk; + u8 _reserved5[12]; + u32 pcs_lfps_ecstart_eqtlock; + u8 _reserved6[4]; + u32 pcs_rxeqtraining_wait_time; + u32 pcs_rxeqtraining_run_time; + u8 _reserved7[4]; + u32 pcs_fll_ctrl1; + u32 pcs_fll_ctrl2; + u32 pcs_fll_cnt_val_l; + u32 pcs_fll_cnt_val_h_tol; + u32 pcs_fll_man_code; + u32 pcs_autonomous_mode_ctrl; + u8 _reserved8[152]; + u32 pcs_ready_status; + u8 _reserved9[96]; + u32 pcs_rx_sigdet_lvl; + u8 _reserved10[48]; + u32 pcs_refgen_req_config1; + u32 pcs_refgen_req_config2; +}; +check_member(usb3_phy_pcs_reg_layout, pcs_sw_reset, 0x000); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_v0, 0x00c); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_v1, 0x010); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_v2, 0x014); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_v3, 0x018); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_v4, 0x01c); +check_member(usb3_phy_pcs_reg_layout, pcs_txmgn_ls, 0x020); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_v0, 0x024); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_v0, 0x028); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_v1, 0x02c); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_v1, 0x030); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_v2, 0x034); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_v2, 0x038); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_v3, 0x03c); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_v3, 0x040); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_v4, 0x044); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_v4, 0x048); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m6db_ls, 0x04c); +check_member(usb3_phy_pcs_reg_layout, pcs_txdeemph_m3p5db_ls, 0x050); +check_member(usb3_phy_pcs_reg_layout, pcs_rate_slew_cntrl, 0x05c); +check_member(usb3_phy_pcs_reg_layout, pcs_power_state_config2, 0x064); +check_member(usb3_phy_pcs_reg_layout, pcs_rcvr_dtct_dly_p1u2_l, 0x070); +check_member(usb3_phy_pcs_reg_layout, pcs_rcvr_dtct_dly_p1u2_h, 0x074); +check_member(usb3_phy_pcs_reg_layout, pcs_rcvr_dtct_dly_u3_l, 0x078); +check_member(usb3_phy_pcs_reg_layout, pcs_rcvr_dtct_dly_u3_h, 0x07c); +check_member(usb3_phy_pcs_reg_layout, pcs_lock_detect_config1, 0x080); +check_member(usb3_phy_pcs_reg_layout, pcs_lock_detect_config2, 0x084); +check_member(usb3_phy_pcs_reg_layout, pcs_lock_detect_config3, 0x088); +check_member(usb3_phy_pcs_reg_layout, pcs_pwrup_reset_dly_time_auxclk, 0x0a0); +check_member(usb3_phy_pcs_reg_layout, pcs_rxeqtraining_wait_time, 0x0b8); +check_member(usb3_phy_pcs_reg_layout, pcs_fll_cnt_val_h_tol, 0x0d0); +check_member(usb3_phy_pcs_reg_layout, pcs_autonomous_mode_ctrl, 0x0d8); +check_member(usb3_phy_pcs_reg_layout, pcs_ready_status, 0x174); +check_member(usb3_phy_pcs_reg_layout, pcs_refgen_req_config2, 0x210); + +static struct usb3_phy_qserdes_com_reg_layout *const qserdes_com_reg_layout = + (void *)QMP_PHY_QSERDES_COM_REG_BASE; +static struct usb3_phy_qserdes_tx_reg_layout *const qserdes_tx_reg_layout = + (void *)QMP_PHY_QSERDES_TX_REG_BASE; +static struct usb3_phy_qserdes_rx_reg_layout *const qserdes_rx_reg_layout = + (void *)QMP_PHY_QSERDES_RX_REG_BASE; +static struct usb3_phy_pcs_reg_layout *const pcs_reg_layout = + (void *)QMP_PHY_PCS_REG_BASE; + + + +struct usb_dwc3 { + u32 sbuscfg0; + u32 sbuscfg1; + u32 txthrcfg; + u32 rxthrcfg; + u32 ctl; + u32 pmsts; + u32 sts; + u32 uctl1; + u32 snpsid; + u32 gpio; + u32 uid; + u32 uctl; + u64 buserraddr; + u64 prtbimap; + u8 reserved1[32]; + u32 dbgfifospace; + u32 dbgltssm; + u32 dbglnmcc; + u32 dbgbmu; + u32 dbglspmux; + u32 dbglsp; + u32 dbgepinfo0; + u32 dbgepinfo1; + u64 prtbimap_hs; + u64 prtbimap_fs; + u8 reserved2[112]; + u32 usb2phycfg; + u8 reserved3[124]; + u32 usb2phyacc; + u8 reserved4[60]; + u32 usb3pipectl; + u8 reserved5[60]; +}; +check_member(usb_dwc3, usb3pipectl, 0x1c0); + +static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = { + {&qserdes_com_reg_layout->com_pll_ivco, 0x07}, + {&qserdes_com_reg_layout->com_sysclk_en_sel, 0x14}, + {&qserdes_com_reg_layout->com_bias_en_clkbuflr_en, 0x08}, + {&qserdes_com_reg_layout->com_clk_select, 0x30}, + {&qserdes_com_reg_layout->com_sys_clk_ctrl, 0x02}, + {&qserdes_com_reg_layout->com_resetsm_ctrl2, 0x08}, + {&qserdes_com_reg_layout->com_cmn_config, 0x16}, + {&qserdes_com_reg_layout->com_svs_mode_clk_sel, 0x01}, + {&qserdes_com_reg_layout->com_hsclk_sel, 0x80}, + {&qserdes_com_reg_layout->com_dec_start_mode0, 0x82}, + {&qserdes_com_reg_layout->com_div_frac_start1_mode0, 0xab}, + {&qserdes_com_reg_layout->com_div_frac_start2_mode0, 0xea}, + {&qserdes_com_reg_layout->com_div_frac_start3_mode0, 0x02}, + {&qserdes_com_reg_layout->com_cp_ctrl_mode0, 0x06}, + {&qserdes_com_reg_layout->com_pll_rctrl_mode0, 0x16}, + {&qserdes_com_reg_layout->com_pll_cctrl_mode0, 0x36}, + {&qserdes_com_reg_layout->com_integloop_gain1_mode0, 0x00}, + {&qserdes_com_reg_layout->com_integloop_gain0_mode0, 0x3f}, + {&qserdes_com_reg_layout->com_vco_tune2_mode0, 0x01}, + {&qserdes_com_reg_layout->com_vco_tune1_mode0, 0xc9}, + {&qserdes_com_reg_layout->com_coreclk_div_mode0, 0x0a}, + {&qserdes_com_reg_layout->com_lock_cmp3_mode0, 0x00}, + {&qserdes_com_reg_layout->com_lock_cmp2_mode0, 0x34}, + {&qserdes_com_reg_layout->com_lock_cmp1_mode0, 0x15}, + {&qserdes_com_reg_layout->com_lock_cmp_en, 0x04}, + {&qserdes_com_reg_layout->com_core_clk_en, 0x00}, + {&qserdes_com_reg_layout->com_lock_cmp_cfg, 0x00}, + {&qserdes_com_reg_layout->com_vco_tune_map, 0x00}, + {&qserdes_com_reg_layout->com_sysclk_buf_enable, 0x0a}, + {&qserdes_com_reg_layout->com_ssc_en_center, 0x01}, + {&qserdes_com_reg_layout->com_ssc_per1, 0x31}, + {&qserdes_com_reg_layout->com_ssc_per2, 0x01}, + {&qserdes_com_reg_layout->com_ssc_adj_per1, 0x00}, + {&qserdes_com_reg_layout->com_ssc_adj_per2, 0x00}, + {&qserdes_com_reg_layout->com_ssc_step_size1, 0x85}, + {&qserdes_com_reg_layout->com_ssc_step_size2, 0x07}, +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = { + {&qserdes_tx_reg_layout->tx_highz_drvr_en, 0x10}, + {&qserdes_tx_reg_layout->tx_rcv_detect_lvl_2, 0x12}, + {&qserdes_tx_reg_layout->tx_lane_mode_1, 0x16}, + {&qserdes_tx_reg_layout->tx_res_code_lane_offset_rx, 0x09}, + {&qserdes_tx_reg_layout->tx_res_code_lane_offset_tx, 0x06}, +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = { + {&qserdes_rx_reg_layout->rx_ucdr_fastlock_fo_gain, 0x0b}, + {&qserdes_rx_reg_layout->rx_rx_equ_adap_ctrl2, 0x0f}, + {&qserdes_rx_reg_layout->rx_rx_equ_adap_ctrl3, 0x4e}, + {&qserdes_rx_reg_layout->rx_rx_equ_adap_ctrl4, 0x18}, + {&qserdes_rx_reg_layout->rx_rx_eq_offset_adap_ctrl1, 0x77}, + {&qserdes_rx_reg_layout->rx_rx_offset_adap_ctrl2, 0x80}, + {&qserdes_rx_reg_layout->rx_sigdet_ctrl, 0x03}, + {&qserdes_rx_reg_layout->rx_sigdet_deglitch_ctrl, 0x16}, + {&qserdes_rx_reg_layout->rx_ucdr_so_saturtn_and_en, 0x75}, + {&qserdes_rx_reg_layout->rx_ucdr_pi_cntrls, 0x80}, + {&qserdes_rx_reg_layout->rx_ucdr_fo_gain, 0x0a}, + {&qserdes_rx_reg_layout->rx_ucdr_so_gain_half, 0x06}, + {&qserdes_rx_reg_layout->rx_sigdet_enables, 0x00}, +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = { + /* FLL settings */ + {&pcs_reg_layout->pcs_fll_ctrl2, 0x83}, + {&pcs_reg_layout->pcs_fll_cnt_val_l, 0x09}, + {&pcs_reg_layout->pcs_fll_cnt_val_h_tol, 0xa2}, + {&pcs_reg_layout->pcs_fll_man_code, 0x40}, + {&pcs_reg_layout->pcs_fll_ctrl1, 0x02}, + + /* Lock Det settings */ + {&pcs_reg_layout->pcs_lock_detect_config1, 0xd1}, + {&pcs_reg_layout->pcs_lock_detect_config2, 0x1f}, + {&pcs_reg_layout->pcs_lock_detect_config3, 0x47}, + {&pcs_reg_layout->pcs_power_state_config2, 0x1b}, + + {&pcs_reg_layout->pcs_rx_sigdet_lvl, 0xba}, + {&pcs_reg_layout->pcs_txmgn_v0, 0x9f}, + {&pcs_reg_layout->pcs_txmgn_v1, 0x9f}, + {&pcs_reg_layout->pcs_txmgn_v2, 0xb7}, + {&pcs_reg_layout->pcs_txmgn_v3, 0x4e}, + {&pcs_reg_layout->pcs_txmgn_v4, 0x65}, + {&pcs_reg_layout->pcs_txmgn_ls, 0x6b}, + {&pcs_reg_layout->pcs_txdeemph_m6db_v0, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_v0, 0x0d}, + {&pcs_reg_layout->pcs_txdeemph_m6db_v1, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_v1, 0x0d}, + {&pcs_reg_layout->pcs_txdeemph_m6db_v2, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_v2, 0x0d}, + {&pcs_reg_layout->pcs_txdeemph_m6db_v3, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_v3, 0x1d}, + {&pcs_reg_layout->pcs_txdeemph_m6db_v4, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_v4, 0x0d}, + {&pcs_reg_layout->pcs_txdeemph_m6db_ls, 0x15}, + {&pcs_reg_layout->pcs_txdeemph_m3p5db_ls, 0x0d}, + {&pcs_reg_layout->pcs_rate_slew_cntrl, 0x02}, + {&pcs_reg_layout->pcs_pwrup_reset_dly_time_auxclk, 0x04}, + {&pcs_reg_layout->pcs_tsync_rsync_time, 0x44}, + {&pcs_reg_layout->pcs_rcvr_dtct_dly_p1u2_l, 0xe7}, + {&pcs_reg_layout->pcs_rcvr_dtct_dly_p1u2_h, 0x03}, + {&pcs_reg_layout->pcs_rcvr_dtct_dly_u3_l, 0x40}, + {&pcs_reg_layout->pcs_rcvr_dtct_dly_u3_h, 0x00}, + {&pcs_reg_layout->pcs_rxeqtraining_wait_time, 0x75}, + {&pcs_reg_layout->pcs_lfps_ecstart_eqtlock, 0x86}, + {&pcs_reg_layout->pcs_rxeqtraining_run_time, 0x13}, +}; + + + +struct usb_dwc3_cfg { + struct usb_dwc3 *usb_host_dwc3; + struct usb_qusb_phy_pll *qusb_phy_pll; + struct usb_qusb_phy_dig *qusb_phy_dig; + /* Init sequence for QMP PHY blocks - serdes, tx, rx, pcs */ + const struct qmp_phy_init_tbl *serdes_tbl; + int serdes_tbl_num; + const struct qmp_phy_init_tbl *tx_tbl; + int tx_tbl_num; + const struct qmp_phy_init_tbl *rx_tbl; + int rx_tbl_num; + const struct qmp_phy_init_tbl *pcs_tbl; + int pcs_tbl_num; + struct usb3_phy_pcs_reg_layout *qmp_pcs_reg; + + u32 *usb3_bcr; + u32 *qusb2phy_bcr; + u32 *gcc_usb3phy_bcr_reg; + u32 *gcc_qmpphy_bcr_reg; + struct usb_board_data *board_data; + u32 efuse_offset; +}; + +static struct usb_dwc3_cfg usb_port0 = { + .usb_host_dwc3 = (void *)USB_HOST_DWC3_BASE, + .qusb_phy_pll = (void *)QUSB_PRIM_PHY_BASE, + .qusb_phy_dig = (void *)QUSB_PRIM_PHY_DIG_BASE, + .serdes_tbl = qmp_v3_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl), + .tx_tbl = qmp_v3_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl), + .rx_tbl = qmp_v3_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl), + .pcs_tbl = qmp_v3_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl), + .qmp_pcs_reg = (void *)QMP_PHY_PCS_REG_BASE, + .usb3_bcr = &gcc->usb30_prim_bcr, + .qusb2phy_bcr = &gcc->qusb2phy_prim_bcr, + .gcc_usb3phy_bcr_reg = &gcc->usb3_dp_phy_prim_bcr, + .gcc_qmpphy_bcr_reg = &gcc->usb3_phy_prim_bcr, + .efuse_offset = 25, +}; + + +static struct qfprom_corr * const qfprom_corr_efuse = (void *)QFPROM_BASE; + +static void reset_usb(struct usb_dwc3_cfg *dwc3) +{ + /* Assert Core reset */ + clock_reset_bcr(dwc3->usb3_bcr, 1); + + /* Assert QUSB PHY reset */ + clock_reset_bcr(dwc3->qusb2phy_bcr, 1); + + /* Assert QMP PHY reset */ + clock_reset_bcr(dwc3->gcc_usb3phy_bcr_reg, 1); + clock_reset_bcr(dwc3->gcc_qmpphy_bcr_reg, 1); +} + +void reset_usb0(void) +{ + /* Before Resetting PHY, put Core in Reset */ + printk(BIOS_INFO, "Starting DWC3 and PHY resets for USB(0)\n"); + + reset_usb(&usb_port0); +} + + +/* + * Update board specific PHY tuning override values that specified from + * board file. + */ +static void qusb2_phy_override_phy_params(struct usb_dwc3_cfg *dwc3) +{ + /* Override preemphasis value */ + write32(&dwc3->qusb_phy_dig->tune1, + dwc3->board_data->port_tune1); + + /* Override BIAS_CTRL_2 to reduce the TX swing overshooting. */ + write32(&dwc3->qusb_phy_pll->bias_ctrl_2, + dwc3->board_data->pll_bias_control_2); + + /* Override IMP_RES_OFFSET value */ + write32(&dwc3->qusb_phy_dig->imp_ctrl1, + dwc3->board_data->imp_ctrl1); +} + +/* + * Fetches HS Tx tuning value from efuse register and sets the + * QUSB2PHY_PORT_TUNE1/2 register. + * For error case, skip setting the value and use the default value. + */ +static void qusb2_phy_set_tune_param(struct usb_dwc3_cfg *dwc3) +{ + /* + * Efuse registers 3 bit value specifies tuning for HSTX + * output current in TUNE1 Register. Hence Extract 3 bits from + * EFUSE at correct position. + */ + + const int efuse_bits = 3; + int bit_pos = dwc3->efuse_offset; + + u32 bit_mask = (1 << efuse_bits) - 1; + u32 tune_val = + (read32(&qfprom_corr_efuse->qusb_hstx_trim_lsb) >> bit_pos) + & bit_mask; + /* + * if efuse reg is updated (i.e non-zero) then use it to program + * tune parameters. + */ + if (tune_val) + clrsetbits_le32(&dwc3->qusb_phy_dig->tune1, + PORT_TUNE1_MASK, tune_val << 4); +} + +static void tune_phy(struct usb_dwc3_cfg *dwc3, struct usb_qusb_phy_dig *phy) +{ + write32(&phy->pwr_ctrl2, QUSB2PHY_PWR_CTRL2); + /* IMP_CTRL1: Control the impedance reduction */ + write32(&phy->imp_ctrl1, QUSB2PHY_IMP_CTRL1); + /* IMP_CTRL2: Impedance offset/mapping slope */ + write32(&phy->imp_ctrl2, QUSB2PHY_IMP_CTRL1); + write32(&phy->chg_ctrl2, QUSB2PHY_IMP_CTRL2); + /* + * TUNE1: Sets HS Impedance to approx 45 ohms + * then override with efuse value. + */ + write32(&phy->tune1, QUSB2PHY_PORT_TUNE1); + /* TUNE2: Tuning for HS Disconnect Level */ + write32(&phy->tune2, QUSB2PHY_PORT_TUNE2); + /* TUNE3: Tune squelch range */ + write32(&phy->tune3, QUSB2PHY_PORT_TUNE3); + /* TUNE4: Sets EOP_DLY(Squelch rising edge to linestate falling edge) */ + write32(&phy->tune4, QUSB2PHY_PORT_TUNE4); + write32(&phy->tune5, QUSB2PHY_PORT_TUNE5); + + if (dwc3->board_data) { + /* Override board specific PHY tuning values */ + qusb2_phy_override_phy_params(dwc3); + + /* Set efuse value for tuning the PHY */ + qusb2_phy_set_tune_param(dwc3); + } +} + +static void hs_qusb_phy_init(struct usb_dwc3_cfg *dwc3) +{ + /* PWR_CTRL: set the power down bit to disable the PHY */ + setbits_le32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN); + + write32(&dwc3->qusb_phy_pll->analog_controls_two, + QUSB2PHY_PLL_ANALOG_CONTROLS_TWO); + write32(&dwc3->qusb_phy_pll->clock_inverters, + QUSB2PHY_PLL_CLOCK_INVERTERS); + write32(&dwc3->qusb_phy_pll->cmode, + QUSB2PHY_PLL_CMODE); + write32(&dwc3->qusb_phy_pll->lock_delay, + QUSB2PHY_PLL_LOCK_DELAY); + write32(&dwc3->qusb_phy_pll->dig_tim, + QUSB2PHY_PLL_DIGITAL_TIMERS_TWO); + write32(&dwc3->qusb_phy_pll->bias_ctrl_1, + QUSB2PHY_PLL_BIAS_CONTROL_1); + write32(&dwc3->qusb_phy_pll->bias_ctrl_2, + QUSB2PHY_PLL_BIAS_CONTROL_2); + + tune_phy(dwc3, dwc3->qusb_phy_dig); + + /* PWR_CTRL1: Clear the power down bit to enable the PHY */ + clrbits_le32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN); + + write32(&dwc3->qusb_phy_dig->debug_ctrl2, + DEBUG_CTRL2_MUX_PLL_LOCK_STATUS); + + /* + * DEBUG_STAT5: wait for 160uS for PLL lock; + * vstatus[0] changes from 0 to 1. + */ + long lock_us = wait_us(160, read32(&dwc3->qusb_phy_dig->debug_stat5) & + VSTATUS_PLL_LOCK_STATUS_MASK); + if (!lock_us) + printk(BIOS_ERR, "ERROR: QUSB PHY PLL LOCK fails\n"); + else + printk(BIOS_DEBUG, "QUSB PHY initialized and locked in %ldus\n", + lock_us); +} + +static void qcom_qmp_phy_configure(const struct qmp_phy_init_tbl tbl[], + int num) +{ + int i; + const struct qmp_phy_init_tbl *t = tbl; + + if (!t) + return; + + for (i = 0; i < num; i++, t++) + write32(t->address, t->val); +} + +static void ss_qmp_phy_init(struct usb_dwc3_cfg *dwc3) +{ + /* power up USB3 PHY */ + write32(&dwc3->qmp_pcs_reg->pcs_power_down_control, 0x01); + + /* Serdes configuration */ + qcom_qmp_phy_configure(dwc3->serdes_tbl, dwc3->serdes_tbl_num); + /* Tx, Rx, and PCS configurations */ + qcom_qmp_phy_configure(dwc3->tx_tbl, dwc3->tx_tbl_num); + qcom_qmp_phy_configure(dwc3->rx_tbl, dwc3->rx_tbl_num); + qcom_qmp_phy_configure(dwc3->pcs_tbl, dwc3->pcs_tbl_num); + + /* perform software reset of PCS/Serdes */ + write32(&dwc3->qmp_pcs_reg->pcs_sw_reset, 0x00); + /* start PCS/Serdes to operation mode */ + write32(&dwc3->qmp_pcs_reg->pcs_start_control, 0x03); + + /* + * Wait for PHY initialization to be done + * PCS_STATUS: wait for 1ms for PHY STATUS; + * SW can continuously check for PHYSTATUS = 1.b0. + */ + long lock_us = wait_us(1000, + !(read32(&dwc3->qmp_pcs_reg->pcs_ready_status) & + USB3_PCS_PHYSTATUS)); + if (!lock_us) + printk(BIOS_ERR, "ERROR: QMP PHY PLL LOCK fails:\n"); + else + printk(BIOS_DEBUG, "QMP PHY initialized and locked in %ldus\n", + lock_us); +} + +static void setup_dwc3(struct usb_dwc3 *dwc3) +{ + /* core exits U1/U2/U3 only in PHY power state P1/P2/P3 respectively */ + clrsetbits_le32(&dwc3->usb3pipectl, + DWC3_GUSB3PIPECTL_DELAYP1TRANS, + DWC3_GUSB3PIPECTL_UX_EXIT_IN_PX); + + /* + * Configure USB phy interface of DWC3 core. + * 1. Select UTMI+ PHY with 16-bit interface. + * 2. Set USBTRDTIM to the corresponding value + * according to the UTMI+ PHY interface. + */ + clrsetbits_le32(&dwc3->usb2phycfg, + (DWC3_GUSB2PHYCFG_USB2TRDTIM_MASK | + DWC3_GUSB2PHYCFG_PHYIF_MASK), + (DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) | + DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT))); + + clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_SCALEDOWN_MASK | + DWC3_GCTL_DISSCRAMBLE), + DWC3_GCTL_U2EXIT_LFPS | DWC3_GCTL_DSBLCLKGTNG); + + /* configure controller in Host mode */ + clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)), + DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_HOST)); + printk(BIOS_SPEW, "Configure USB in Host mode\n"); +} + +/* Initialization of DWC3 Core and PHY */ +static void setup_usb_host(struct usb_dwc3_cfg *dwc3, + struct usb_board_data *board_data) +{ + dwc3->board_data = board_data; + + /* Clear core reset. */ + clock_reset_bcr(dwc3->usb3_bcr, 0); + + /* Clear QUSB PHY reset. */ + clock_reset_bcr(dwc3->qusb2phy_bcr, 0); + + /* Initialize QUSB PHY */ + hs_qusb_phy_init(dwc3); + + /* Clear QMP PHY resets. */ + clock_reset_bcr(dwc3->gcc_usb3phy_bcr_reg, 0); + clock_reset_bcr(dwc3->gcc_qmpphy_bcr_reg, 0); + + /* Initialize QMP PHY */ + ss_qmp_phy_init(dwc3); + + setup_dwc3(dwc3->usb_host_dwc3); + + printk(BIOS_INFO, "DWC3 and PHY setup finished\n"); +} + +void setup_usb_host0(struct usb_board_data *board_data) +{ + printk(BIOS_INFO, "Setting up USB HOST0 controller.\n"); + setup_usb_host(&usb_port0, board_data); +} + + -- To view, visit https://review.coreboot.org/c/coreboot/+/35503 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I0651fc28dc227efbeb23eeefe9b96a3b940ae995 Gerrit-Change-Number: 35503 Gerrit-PatchSet: 1 Gerrit-Owner: mturney mturney <mturney(a)codeaurora.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: mturney mturney <mturney(a)codeaurora.org> Gerrit-MessageType: newchange

4 13

Change in coreboot[master]: sc7180: Add AOP firmware support
by mturney mturney (Code Review) 05 Dec '19

05 Dec '19

Hello ashk(a)codeaurora.org, I'd like you to do a code review. Please visit https://review.coreboot.org/c/coreboot/+/35502 to review the following change. Change subject: sc7180: Add AOP firmware support ...................................................................... sc7180: Add AOP firmware support Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/25210/85 Change-Id: I1cd552fbf03b5135e5911f1143f8778cad81e360 Signed-off-by: ashk <ashk(a)codeaurora.org> --- M src/soc/qualcomm/sc7180/Makefile.inc A src/soc/qualcomm/sc7180/aop_load_reset.c A src/soc/qualcomm/sc7180/include/soc/aop.h M src/soc/qualcomm/sc7180/include/soc/memlayout.ld M src/soc/qualcomm/sc7180/include/soc/symbols.h M src/soc/qualcomm/sc7180/mmu.c M src/soc/qualcomm/sc7180/soc.c 7 files changed, 89 insertions(+), 1 deletion(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/35502/1 diff --git a/src/soc/qualcomm/sc7180/Makefile.inc b/src/soc/qualcomm/sc7180/Makefile.inc index 7ad0328..d8fc33a 100644 --- a/src/soc/qualcomm/sc7180/Makefile.inc +++ b/src/soc/qualcomm/sc7180/Makefile.inc @@ -48,6 +48,7 @@ ramstage-y += qcom_qup_se.c ramstage-$(CONFIG_DRIVERS_UART) += uart.c ramstage-$(CONFIG_SC7180_QSPI) += qspi.c +ramstage-y += aop_load_reset.c ################################################################################ diff --git a/src/soc/qualcomm/sc7180/aop_load_reset.c b/src/soc/qualcomm/sc7180/aop_load_reset.c new file mode 100644 index 0000000..8d22d62 --- /dev/null +++ b/src/soc/qualcomm/sc7180/aop_load_reset.c @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <string.h> +#include <arch/cache.h> +#include <cbfs.h> +#include <halt.h> +#include <console/console.h> +#include <timestamp.h> +#include <soc/mmu.h> +#include <soc/aop.h> +#include <soc/clock.h> + +void aop_fw_load_reset(void) +{ + bool aop_fw_entry; + + struct prog aop_fw_prog = + PROG_INIT(PROG_PAYLOAD, CONFIG_CBFS_PREFIX "/aop"); + + if (prog_locate(&aop_fw_prog)) + die("SOC image: AOP_FW not found"); + + aop_fw_entry = selfload(&aop_fw_prog); + if (!aop_fw_entry) + die("SOC image: AOP load failed"); + + clock_reset_aop(); + + printk(BIOS_DEBUG, "\nSOC:AOP brought out of reset.\n"); +} diff --git a/src/soc/qualcomm/sc7180/include/soc/aop.h b/src/soc/qualcomm/sc7180/include/soc/aop.h new file mode 100644 index 0000000..5573163 --- /dev/null +++ b/src/soc/qualcomm/sc7180/include/soc/aop.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_QUALCOMM_SC7180_AOP_H__ +#define _SOC_QUALCOMM_SC7180_AOP_H__ + +void aop_fw_load_reset(void); + +#endif // _SOC_QUALCOMM_SC7180_AOP_H__ diff --git a/src/soc/qualcomm/sc7180/include/soc/memlayout.ld b/src/soc/qualcomm/sc7180/include/soc/memlayout.ld index ae00816..f4e6f05 100644 --- a/src/soc/qualcomm/sc7180/include/soc/memlayout.ld +++ b/src/soc/qualcomm/sc7180/include/soc/memlayout.ld @@ -24,8 +24,24 @@ #define BSRAM_START(addr) SYMBOL(bsram, addr) #define BSRAM_END(addr) SYMBOL(ebsram, addr) +/* AOP : 0x0B000000 - 0x0B100000 */ +#define AOPSRAM_START(addr) SYMBOL(aopsram, addr) +#define AOPSRAM_END(addr) SYMBOL(eaopsram, addr) + +/* AOPMSG : 0x0C300000 - 0x0C400000 */ +#define AOPMSG_START(addr) SYMBOL(aopmsg, addr) +#define AOPMSG_END(addr) SYMBOL(eaopmsg, addr) + SECTIONS { + AOPSRAM_START(0x0B000000) + REGION(aop, 0x0B000000, 0x100000, 4096) + AOPSRAM_END(0x0B100000) + + AOPMSG_START(0x0C300000) + REGION(aop_ss_msg_ram_drv15, 0x0C3F0000, 0x400, 0x100) + AOPMSG_END(0x0C400000) + SSRAM_START(0x14680000) OVERLAP_VERSTAGE_ROMSTAGE(0x14680000, 100K) REGION(qcsdi, 0x14699000, 52K, 4K) diff --git a/src/soc/qualcomm/sc7180/include/soc/symbols.h b/src/soc/qualcomm/sc7180/include/soc/symbols.h index 14b779f..893ecc3 100644 --- a/src/soc/qualcomm/sc7180/include/soc/symbols.h +++ b/src/soc/qualcomm/sc7180/include/soc/symbols.h @@ -26,5 +26,7 @@ DECLARE_REGION(dcb); DECLARE_REGION(pmic); DECLARE_REGION(limits_cfg); +DECLARE_REGION(aop); +DECLARE_REGION(aop_ss_msg_ram_drv15); #endif /* _SOC_QUALCOMM_SC7180_SYMBOLS_H_ */ diff --git a/src/soc/qualcomm/sc7180/mmu.c b/src/soc/qualcomm/sc7180/mmu.c index fd59a5a..2eb8c86 100644 --- a/src/soc/qualcomm/sc7180/mmu.c +++ b/src/soc/qualcomm/sc7180/mmu.c @@ -33,3 +33,7 @@ mmu_enable(); } +void soc_mmu_dram_config_post_dram_init(void) +{ + mmu_config_range((void *)_aop, REGION_SIZE(aop), CACHED_RAM); +} diff --git a/src/soc/qualcomm/sc7180/soc.c b/src/soc/qualcomm/sc7180/soc.c index 4fc5b30..7039935 100644 --- a/src/soc/qualcomm/sc7180/soc.c +++ b/src/soc/qualcomm/sc7180/soc.c @@ -18,6 +18,7 @@ #include <soc/mmu.h> #include <soc/mmu_common.h> #include <soc/symbols.h> +#include <soc/aop.h> static void soc_read_resources(struct device *dev) { @@ -34,7 +35,7 @@ static void soc_init(struct device *dev) { - + aop_fw_load_reset(); } static struct device_operations soc_ops = { -- To view, visit https://review.coreboot.org/c/coreboot/+/35502 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I1cd552fbf03b5135e5911f1143f8778cad81e360 Gerrit-Change-Number: 35502 Gerrit-PatchSet: 1 Gerrit-Owner: mturney mturney <mturney(a)codeaurora.org> Gerrit-Reviewer: Julius Werner <jwerner(a)chromium.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: ashk(a)codeaurora.org Gerrit-Reviewer: mturney mturney <mturney(a)codeaurora.org> Gerrit-MessageType: newchange

4 9

Change in coreboot[master]: sc7180: Add SPI-NOR support
by mturney mturney (Code Review) 05 Dec '19

05 Dec '19

mturney mturney has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35501 ) Change subject: sc7180: Add SPI-NOR support ...................................................................... sc7180: Add SPI-NOR support This implements the SPI-NOR driver for the Qualcomm QSPI core. Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/27483/58 Change-Id: I2eb8cf90aa4559541ba293b3fd2870896bed20b7 Signed-off-by: Akash Asthana <akashast(a)codeaurora.org> --- M src/soc/qualcomm/sc7180/Kconfig M src/soc/qualcomm/sc7180/Makefile.inc M src/soc/qualcomm/sc7180/bootblock.c A src/soc/qualcomm/sc7180/include/soc/qspi.h A src/soc/qualcomm/sc7180/qspi.c M src/soc/qualcomm/sc7180/spi.c 6 files changed, 452 insertions(+), 3 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/01/35501/1 diff --git a/src/soc/qualcomm/sc7180/Kconfig b/src/soc/qualcomm/sc7180/Kconfig index a1a7f03..df5d116 100644 --- a/src/soc/qualcomm/sc7180/Kconfig +++ b/src/soc/qualcomm/sc7180/Kconfig @@ -28,4 +28,13 @@ help Select the QUP instance to be used for UART console output. +config SC7180_QSPI + bool + default y if COMMON_CBFS_SPI_WRAPPER + prompt "Build Flash Using SPI-NOR" + +config BOOT_DEVICE_SPI_FLASH_BUS + int + default 16 + endif diff --git a/src/soc/qualcomm/sc7180/Makefile.inc b/src/soc/qualcomm/sc7180/Makefile.inc index 5a4b68c..7ad0328 100644 --- a/src/soc/qualcomm/sc7180/Makefile.inc +++ b/src/soc/qualcomm/sc7180/Makefile.inc @@ -12,6 +12,7 @@ bootblock-y += qupv3_fw_config.c bootblock-y += qupv3_config.c bootblock-y += qcom_qup_se.c +bootblock-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ verstage-y += timer.c @@ -20,6 +21,7 @@ verstage-y += clock.c verstage-y += qcom_qup_se.c verstage-$(CONFIG_DRIVERS_UART) += uart.c +verstage-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ romstage-y += cbmem.c @@ -32,6 +34,7 @@ romstage-y += clock.c romstage-y += qcom_qup_se.c romstage-$(CONFIG_DRIVERS_UART) += uart.c +romstage-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ ramstage-y += soc.c @@ -44,6 +47,7 @@ ramstage-y += qupv3_config.c ramstage-y += qcom_qup_se.c ramstage-$(CONFIG_DRIVERS_UART) += uart.c +ramstage-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ diff --git a/src/soc/qualcomm/sc7180/bootblock.c b/src/soc/qualcomm/sc7180/bootblock.c index b0cd9f2..8ee04d2 100644 --- a/src/soc/qualcomm/sc7180/bootblock.c +++ b/src/soc/qualcomm/sc7180/bootblock.c @@ -18,10 +18,12 @@ #include <soc/mmu.h> #include <soc/clock.h> #include <soc/qupv3_fw_config.h> +#include <soc/qspi.h> void bootblock_soc_init(void) { sc7180_mmu_init(); clock_init(); + quadspi_init(25 * MHz); qupv3_fw_init(); } diff --git a/src/soc/qualcomm/sc7180/include/soc/qspi.h b/src/soc/qualcomm/sc7180/include/soc/qspi.h new file mode 100644 index 0000000..c3d1f78 --- /dev/null +++ b/src/soc/qualcomm/sc7180/include/soc/qspi.h @@ -0,0 +1,121 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2019 Qualcomm Technologies. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <types.h> +#include <soc/addressmap.h> +#include <spi-generic.h> + +#ifndef __SOC_QUALCOMM_SC7180_QSPI_H__ +#define __SOC_QUALCOMM_SC7180_QSPI_H__ + +struct sc7180_qspi_regs { + u32 mstr_cfg; + u32 ahb_mstr_cfg; + u32 reserve_0; + u32 mstr_int_en; + u32 mstr_int_sts; + u32 pio_xfer_ctrl; + u32 pio_xfer_cfg; + u32 pio_xfer_sts; + u32 pio_dataout_1byte; + u32 pio_dataout_4byte; + u32 rd_fifo_cfg; + u32 rd_fifo_sts; + u32 rd_fifo_rst; + u32 reserve_1[3]; + u32 next_dma_desc_addr; + u32 current_dma_desc_addr; + u32 current_mem_addr; + u32 hw_version; + u32 rd_fifo[16]; +}; + +check_member(sc7180_qspi_regs, rd_fifo, 0x50); +static struct sc7180_qspi_regs * const sc7180_qspi = (void *) QSPI_BASE; + +// MSTR_CONFIG register + +#define TX_DATA_OE_DELAY_SHIFT 24 +#define TX_DATA_OE_DELAY_MASK (0x3 << TX_DATA_OE_DELAY_SHIFT) +#define TX_CS_N_DELAY_SHIFT 22 +#define TX_CS_N_DELAY_MASK (0x3 << TX_CS_N_DELAY_SHIFT) +#define TX_CLK_DELAY_SHIFT 20 +#define TX_CLK_DELAY_MASK (0x3 << TX_CLK_DELAY_SHIFT) +#define TX_DATA_DELAY_SHIFT 18 +#define TX_DATA_DELAY_MASK (0x3 << TX_DATA_DELAY_SHIFT) +#define LPA_BASE_SHIFT 14 +#define LPA_BASE_MASK (0xF << LPA_BASE_SHIFT) +#define SBL_EN BIT(13) +#define CHIP_SELECT_NUM BIT(12) +#define SPI_MODE_SHIFT 10 +#define SPI_MODE_MASK (0x3 << SPI_MODE_SHIFT) +#define BIG_ENDIAN_MODE BIT(9) +#define DMA_ENABLE BIT(8) +#define PIN_WPN BIT(7) +#define PIN_HOLDN BIT(6) +#define FB_CLK_EN BIT(4) +#define FULL_CYCLE_MODE BIT(3) + +// MSTR_INT_ENABLE and MSTR_INT_STATUS register + +#define DMA_CHAIN_DONE BIT(31) +#define TRANSACTION_DONE BIT(16) +#define WRITE_FIFO_OVERRUN BIT(11) +#define WRITE_FIFO_FULL BIT(10) +#define HRESP_FROM_NOC_ERR BIT(3) +#define RESP_FIFO_RDY BIT(2) +#define RESP_FIFO_NOT_EMPTY BIT(1) +#define RESP_FIFO_UNDERRUN BIT(0) + +// PIO_TRANSFER_CONFIG register + +#define TRANSFER_FRAGMENT BIT(8) +#define MULTI_IO_MODE_SHIFT 1 +#define MULTI_IO_MODE_MASK (0x7 << MULTI_IO_MODE_SHIFT) +#define TRANSFER_DIRECTION BIT(0) + +// PIO_TRANSFER_STATUS register + +#define WR_FIFO_BYTES_SHIFT 16 +#define WR_FIFO_BYTES_MASK (0xFFFF << WR_FIFO_BYTES_SHIFT) + +// RD_FIFO_CONFIG register + +#define CONTINUOUS_MODE BIT(0) + +// RD_FIFO_STATUS register + +#define FIFO_EMPTY BIT(11) +#define WR_CNTS_SHIFT 4 +#define WR_CNTS_MASK (0x7F << WR_CNTS_SHIFT) +#define RDY_64BYTE BIT(3) +#define RDY_32BYTE BIT(2) +#define RDY_16BYTE BIT(1) +#define FIFO_RDY BIT(0) + +// RD_FIFO_RESET register + +#define RESET_FIFO BIT(0) + +#define QSPI_MAX_PACKET_COUNT 0xFFC0 + +void quadspi_init(uint32_t hz); +int sc7180_claim_bus(const struct spi_slave *slave); +int sc7180_setup_bus(const struct spi_slave *slave); +void sc7180_release_bus(const struct spi_slave *slave); +int sc7180_xfer(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes); +int sc7180_xfer_dual(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes); +#endif /* __SOC_QUALCOMM_SC7180_QSPI_H__ */ diff --git a/src/soc/qualcomm/sc7180/qspi.c b/src/soc/qualcomm/sc7180/qspi.c new file mode 100644 index 0000000..c589415 --- /dev/null +++ b/src/soc/qualcomm/sc7180/qspi.c @@ -0,0 +1,306 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <spi-generic.h> +#include <spi_flash.h> +#include <arch/cache.h> +#include <device/mmio.h> +#include <soc/addressmap.h> +#include <soc/qspi.h> +#include <soc/gpio.h> +#include <soc/clock.h> +#include <symbols.h> +#include <assert.h> +#include <gpio.h> +#include <string.h> + +#define CACHE_LINE_SIZE 64 + +static int curr_desc_idx = -1; + +struct cmd_desc { + uint32_t data_address; + uint32_t next_descriptor; + uint32_t direction:1; + uint32_t multi_io_mode:3; + uint32_t reserved1:4; + uint32_t fragment:1; + uint32_t reserved2:7; + uint32_t length:16; + //------------------------// + uint32_t bounce_src; + uint32_t bounce_dst; + uint32_t bounce_length; + uint64_t padding[5]; +}; + +enum qspi_mode { + SDR_1BIT = 1, + SDR_2BIT = 2, + SDR_4BIT = 3, + DDR_1BIT = 5, + DDR_2BIT = 6, + DDR_4BIT = 7, +}; + +enum cs_state { + CS_DEASSERT, + CS_ASSERT +}; + +struct xfer_cfg { + enum qspi_mode mode; +}; + +enum bus_xfer_direction { + MASTER_READ = 0, + MASTER_WRITE = 1, +}; + +struct { + struct cmd_desc descriptors[3]; + uint8_t buffers[3][CACHE_LINE_SIZE]; +} *dma = (void *)_dma_coherent; + +static void dma_transfer_chain(struct cmd_desc *chain) +{ + uint32_t mstr_int_status; + + write32(&sc7180_qspi->mstr_int_sts, 0xFFFFFFFF); + write32(&sc7180_qspi->next_dma_desc_addr, (uint32_t)(uintptr_t) chain); + + while (1) { + mstr_int_status = read32(&sc7180_qspi->mstr_int_sts); + if (mstr_int_status & DMA_CHAIN_DONE) + break; + } +} + +static void flush_chain(void) +{ + struct cmd_desc *desc = &dma->descriptors[0]; + uint8_t *src; + uint8_t *dst; + + dma_transfer_chain(desc); + + while (desc) { + if (desc->direction == MASTER_READ) { + if (desc->bounce_length == 0) + dcache_invalidate_by_mva( + (void *)(uintptr_t) desc->data_address, + desc->length); + else { + src = (void *)(uintptr_t) desc->bounce_src; + dst = (void *)(uintptr_t) desc->bounce_dst; + memcpy(dst, src, desc->bounce_length); + } + } + desc = (void *)(uintptr_t) desc->next_descriptor; + } + curr_desc_idx = -1; +} + +static struct cmd_desc *allocate_descriptor(void) +{ + struct cmd_desc *current; + struct cmd_desc *next; + uint8_t index; + + current = (curr_desc_idx == -1) ? + NULL : &dma->descriptors[curr_desc_idx]; + + index = ++curr_desc_idx; + next = &dma->descriptors[index]; + + next->data_address = (uint32_t) (uintptr_t) dma->buffers[index]; + + next->next_descriptor = 0; + next->direction = MASTER_READ; + next->multi_io_mode = 0; + next->reserved1 = 0; + next->fragment = 0; + next->reserved2 = 0; + next->length = 0; + next->bounce_src = 0; + next->bounce_dst = 0; + next->bounce_length = 0; + + if (current) { + current->next_descriptor = (uint32_t)(uintptr_t) next; + current->fragment = 1; + } + + return next; +} + +static void cs_change(enum cs_state state) +{ + gpio_set(GPIO(68), state == CS_DEASSERT); +} + +static void configure_gpios(void) +{ + gpio_output(GPIO(68), 1); + + gpio_configure(GPIO(64), GPIO64_FUNC_QSPI_DATA_0, + GPIO_NO_PULL, GPIO_2MA, GPIO_ENABLE); + + gpio_configure(GPIO(65), GPIO65_FUNC_QSPI_DATA_1, + GPIO_NO_PULL, GPIO_2MA, GPIO_ENABLE); + + gpio_configure(GPIO(63), GPIO63_FUNC_QSPI_CLK, + GPIO_NO_PULL, GPIO_2MA, GPIO_ENABLE); +} + +static void queue_bounce_data(uint8_t *data, uint32_t data_bytes, + enum qspi_mode data_mode, bool write) +{ + struct cmd_desc *desc; + uint8_t *ptr; + + desc = allocate_descriptor(); + desc->direction = write; + desc->multi_io_mode = data_mode; + ptr = (void *)(uintptr_t) desc->data_address; + + if (write) { + memcpy(ptr, data, data_bytes); + } else { + desc->bounce_src = (uint32_t)(uintptr_t) ptr; + desc->bounce_dst = (uint32_t)(uintptr_t) data; + desc->bounce_length = data_bytes; + } + + desc->length = data_bytes; +} + +static void queue_direct_data(uint8_t *data, uint32_t data_bytes, + enum qspi_mode data_mode, bool write) +{ + struct cmd_desc *desc; + + desc = allocate_descriptor(); + desc->direction = write; + desc->multi_io_mode = data_mode; + desc->data_address = (uint32_t)(uintptr_t) data; + desc->length = data_bytes; + + if (write) + dcache_clean_by_mva(data, data_bytes); + else + dcache_invalidate_by_mva(data, data_bytes); +} + +static void queue_data(uint8_t *data, uint32_t data_bytes, + enum qspi_mode data_mode, bool write) +{ + uint8_t *aligned_ptr; + uint8_t *epilog_ptr; + uint32_t prolog_bytes, aligned_bytes, epilog_bytes; + + if (data_bytes == 0) + return; + + aligned_ptr = + (uint8_t *)ALIGN_UP((uintptr_t)data, CACHE_LINE_SIZE); + + prolog_bytes = MIN(data_bytes, aligned_ptr - data); + aligned_bytes = ALIGN_DOWN(data_bytes - prolog_bytes, CACHE_LINE_SIZE); + epilog_bytes = data_bytes - prolog_bytes - aligned_bytes; + + epilog_ptr = data + prolog_bytes + aligned_bytes; + + if (prolog_bytes) + queue_bounce_data(data, prolog_bytes, data_mode, write); + if (aligned_bytes) + queue_direct_data(aligned_ptr, aligned_bytes, data_mode, write); + if (epilog_bytes) + queue_bounce_data(epilog_ptr, epilog_bytes, data_mode, write); +} + +static void reg_init(void) +{ + uint32_t spi_mode; + uint32_t tx_data_oe_delay, tx_data_delay; + uint32_t mstr_config; + + spi_mode = 0; + + tx_data_oe_delay = 0; + tx_data_delay = 0; + + mstr_config = (tx_data_oe_delay << TX_DATA_OE_DELAY_SHIFT) | + (tx_data_delay << TX_DATA_DELAY_SHIFT) | (SBL_EN) | + (spi_mode << SPI_MODE_SHIFT) | + (PIN_HOLDN) | + (FB_CLK_EN) | + (DMA_ENABLE) | + (FULL_CYCLE_MODE); + + write32(&sc7180_qspi->mstr_cfg, mstr_config); + write32(&sc7180_qspi->ahb_mstr_cfg, 0xA42); + write32(&sc7180_qspi->mstr_int_en, 0x0); + write32(&sc7180_qspi->mstr_int_sts, 0xFFFFFFFF); + write32(&sc7180_qspi->rd_fifo_cfg, 0x0); + write32(&sc7180_qspi->rd_fifo_rst, RESET_FIFO); +} + +void quadspi_init(uint32_t hz) +{ + assert(dcache_line_bytes() == CACHE_LINE_SIZE); + clock_configure_qspi(hz * 4); + configure_gpios(); + reg_init(); +} + +int sc7180_claim_bus(const struct spi_slave *slave) +{ + cs_change(CS_ASSERT); + return 0; +} + +void sc7180_release_bus(const struct spi_slave *slave) +{ + cs_change(CS_DEASSERT); +} + +static int xfer(enum qspi_mode mode, const void *dout, size_t out_bytes, + void *din, size_t in_bytes) +{ + if ((out_bytes && !dout) || (in_bytes && !din) || + (in_bytes && out_bytes)) { + return -1; + } + + queue_data((uint8_t *) (out_bytes ? dout : din), + in_bytes | out_bytes, mode, !!out_bytes); + + flush_chain(); + + return 0; +} + +int sc7180_xfer(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes) +{ + return xfer(SDR_1BIT, dout, out_bytes, din, in_bytes); +} + +int sc7180_xfer_dual(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes) +{ + return xfer(SDR_2BIT, dout, out_bytes, din, in_bytes); +} diff --git a/src/soc/qualcomm/sc7180/spi.c b/src/soc/qualcomm/sc7180/spi.c index 5abb81a..c6d4cb1 100644 --- a/src/soc/qualcomm/sc7180/spi.c +++ b/src/soc/qualcomm/sc7180/spi.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2018, The Linux Foundation. All rights reserved. + * Copyright (C) 2019, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -15,12 +15,19 @@ #include <spi-generic.h> #include <spi_flash.h> +#include <soc/qspi.h> -static const struct spi_ctrlr spi_ctrlr; +static const struct spi_ctrlr qspi_ctrlr = { + .claim_bus = sc7180_claim_bus, + .release_bus = sc7180_release_bus, + .xfer = sc7180_xfer, + .xfer_dual = sc7180_xfer_dual, + .max_xfer_size = QSPI_MAX_PACKET_COUNT, +}; const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = { { - .ctrlr = &spi_ctrlr, + .ctrlr = &qspi_ctrlr, .bus_start = CONFIG_BOOT_DEVICE_SPI_FLASH_BUS, .bus_end = CONFIG_BOOT_DEVICE_SPI_FLASH_BUS, }, -- To view, visit https://review.coreboot.org/c/coreboot/+/35501 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I2eb8cf90aa4559541ba293b3fd2870896bed20b7 Gerrit-Change-Number: 35501 Gerrit-PatchSet: 1 Gerrit-Owner: mturney mturney <mturney(a)codeaurora.org> Gerrit-Reviewer: Martin Roth <martinroth(a)google.com> Gerrit-Reviewer: Patrick Georgi <pgeorgi(a)google.com> Gerrit-Reviewer: mturney mturney <mturney(a)codeaurora.org> Gerrit-MessageType: newchange

3 12

Change in coreboot[master]: sc7180: Add clock driver
by mturney mturney (Code Review) 05 Dec '19

05 Dec '19

mturney mturney has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35496 ) Change subject: sc7180: Add clock driver ...................................................................... sc7180: Add clock driver Add support for clock driver for SC7180 Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/31083/6 Change-Id: I3f39252c887c36e8af43bc49289795000e4638d8 Signed-off-by: Taniya Das <tdas(a)codeaurora.org> Signed-off-by: srimuc <srimuc(a)codeaurora.org> --- M src/soc/qualcomm/sc7180/Makefile.inc M src/soc/qualcomm/sc7180/bootblock.c A src/soc/qualcomm/sc7180/clock.c M src/soc/qualcomm/sc7180/include/soc/addressmap.h A src/soc/qualcomm/sc7180/include/soc/clock.h 5 files changed, 468 insertions(+), 2 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/96/35496/1 diff --git a/src/soc/qualcomm/sc7180/Makefile.inc b/src/soc/qualcomm/sc7180/Makefile.inc index a973724..60ad516 100644 --- a/src/soc/qualcomm/sc7180/Makefile.inc +++ b/src/soc/qualcomm/sc7180/Makefile.inc @@ -7,12 +7,14 @@ bootblock-y += timer.c bootblock-y += gpio.c bootblock-y += spi.c +bootblock-y += clock.c bootblock-$(CONFIG_DRIVERS_UART) += uart_bitbang.c ################################################################################ verstage-y += timer.c verstage-y += gpio.c verstage-y += spi.c +verstage-y += clock.c verstage-$(CONFIG_DRIVERS_UART) += uart_bitbang.c ################################################################################ @@ -23,6 +25,7 @@ romstage-y += ../common/mmu.c romstage-y += mmu.c romstage-y += spi.c +romstage-y += clock.c romstage-$(CONFIG_DRIVERS_UART) += uart_bitbang.c ################################################################################ @@ -31,6 +34,7 @@ ramstage-y += timer.c ramstage-y += gpio.c ramstage-y += spi.c +ramstage-y += clock.c ramstage-$(CONFIG_DRIVERS_UART) += uart_bitbang.c ################################################################################ diff --git a/src/soc/qualcomm/sc7180/bootblock.c b/src/soc/qualcomm/sc7180/bootblock.c index b9b8660..f073449 100644 --- a/src/soc/qualcomm/sc7180/bootblock.c +++ b/src/soc/qualcomm/sc7180/bootblock.c @@ -14,9 +14,12 @@ */ #include <bootblock_common.h> +#include <soc/clock.h> #include <soc/mmu.h> +#include <soc/clock.h> void bootblock_soc_init(void) { sc7180_mmu_init(); + clock_init(); } diff --git a/src/soc/qualcomm/sc7180/clock.c b/src/soc/qualcomm/sc7180/clock.c new file mode 100644 index 0000000..0ccbaa6 --- /dev/null +++ b/src/soc/qualcomm/sc7180/clock.c @@ -0,0 +1,251 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2019 Qualcomm Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <assert.h> +#include <commonlib/helpers.h> +#include <device/mmio.h> +#include <soc/clock.h> +#include <types.h> + +#define DIV(div) (2 * div - 1) + +struct clock_config qup_cfg[] = { + { + .hz = 7372800, + .src = SRC_GPLL0_EVEN_300MHZ, + .div = DIV(1), + .m = 384, + .n = 15625, + .d_2 = 15625, + }, + { + .hz = 19200 * KHz, + .src = SRC_XO_19_2MHZ, + .div = DIV(1), + } +}; + +struct clock_config qspi_core_cfg[] = { + { + .hz = 19200 * KHz, + .src = SRC_XO_19_2MHZ, + .div = DIV(1), + }, + { + .hz = 100 * MHz, + .src = SRC_GPLL0_EVEN_300MHZ, + .div = DIV(3), + }, + { + .hz = 150 * MHz, + .src = SRC_GPLL0_EVEN_300MHZ, + .div = DIV(2), + }, + { + .hz = 300 * MHz, + .src = SRC_GPLL0_EVEN_300MHZ, + .div = DIV(1), + } +}; + +static int clock_configure_gpll0(void) +{ + write32(&gcc->gpll0.user_ctl_u, 0x00004805); + + /* Keep existing GPLL0 configuration, in RUN mode @600Mhz. */ + setbits_le32(&gcc->gpll0.user_ctl, + 1 << CLK_CTL_GPLL_PLLOUT_EVEN_SHFT | + 1 << CLK_CTL_GPLL_PLLOUT_MAIN_SHFT | + 1 << CLK_CTL_GPLL_PLLOUT_ODD_SHFT); + + return 0; +} + +static int clock_configure_mnd(struct sc7180_clock *clk, uint32_t m, uint32_t n, + uint32_t d_2) +{ + setbits_le32(&clk->rcg.cfg, + RCG_MODE_DUAL_EDGE << CLK_CTL_CFG_MODE_SHFT); + + write32(&clk->m, m & CLK_CTL_RCG_MND_BMSK); + write32(&clk->n, ~(n-m) & CLK_CTL_RCG_MND_BMSK); + write32(&clk->d_2, ~(d_2) & CLK_CTL_RCG_MND_BMSK); + + return 0; +} + +static int clock_configure_rcg(struct sc7180_rcg *clk, + struct clock_config *clk_cfg, + uint32_t hz, uint32_t num_perfs) +{ + uint32_t reg_val; + uint32_t idx; + + for (idx = 0; idx < num_perfs; idx++) + if (hz <= clk_cfg[idx].hz) + break; + + assert(hz == clk_cfg[idx].hz); + + reg_val = (clk_cfg[idx].src << CLK_CTL_CFG_SRC_SEL_SHFT) | + (clk_cfg[idx].div << CLK_CTL_CFG_SRC_DIV_SHFT); + + /* Set clock config */ + write32(&clk->cfg, reg_val); + + /* Commit config to RCG */ + setbits_le32(&clk->cmd, BIT(CLK_CTL_CMD_UPDATE_SHFT)); + + return 0; +} + +static int clock_configure(struct sc7180_clock *clk, + struct clock_config *clk_cfg, + uint32_t hz, uint32_t num_perfs) +{ + uint32_t reg_val; + uint32_t idx; + + for (idx = 0; idx < num_perfs; idx++) + if (hz <= clk_cfg[idx].hz) + break; + + assert(hz == clk_cfg[idx].hz); + + reg_val = (clk_cfg[idx].src << CLK_CTL_CFG_SRC_SEL_SHFT) | + (clk_cfg[idx].div << CLK_CTL_CFG_SRC_DIV_SHFT); + + /* Set clock config */ + write32(&clk->rcg.cfg, reg_val); + + if (clk_cfg[idx].m != 0) + clock_configure_mnd(clk, clk_cfg[idx].m, clk_cfg[idx].n, + clk_cfg[idx].d_2); + + /* Commit config to RCG*/ + setbits_le32(&clk->rcg.cmd, BIT(CLK_CTL_CMD_UPDATE_SHFT)); + + return 0; +} + +static bool clock_is_off(u32 *cbcr_addr) +{ + return (read32(cbcr_addr) & CLK_CTL_CBC_CLK_OFF_BMSK); +} + +static int clock_enable_vote(void *cbcr_addr, void *vote_addr, + uint32_t vote_bit) +{ + /* Set clock vote bit */ + setbits_le32(vote_addr, BIT(vote_bit)); + + /* Ensure clock is enabled */ + while (clock_is_off(cbcr_addr)) + ; + + return 0; +} + +static int clock_enable(void *cbcr_addr) +{ + /* Set clock enable bit */ + setbits_le32(cbcr_addr, BIT(CLK_CTL_CBC_CLK_EN_SHFT)); + + /* Ensure clock is enabled */ + while (clock_is_off(cbcr_addr)) + ; + + return 0; +} + +void clock_reset_aop(void) +{ + /* Bring AOP out of RESET */ + clrbits_le32(&aoss->aoss_cc_apcs_misc, BIT(AOP_RESET_SHFT)); +} + +void clock_configure_qspi(uint32_t hz) +{ + clock_configure_rcg(&gcc->qspi_core, + qspi_core_cfg, hz, + ARRAY_SIZE(qspi_core_cfg)); + clock_enable(&gcc->qspi_cnoc_ahb_cbcr); + clock_enable(&gcc->qspi_core_cbcr); +} + +int clock_reset_bcr(void *bcr_addr, bool reset) +{ + struct sc7180_bcr *bcr = bcr_addr; + + if (reset) + setbits_le32(bcr, BIT(CLK_CTL_BCR_BLK_ARES_SHFT)); + else + clrbits_le32(bcr, BIT(CLK_CTL_BCR_BLK_ARES_SHFT)); + + return 0; +} + +void clock_configure_qup(int qup, uint32_t hz) +{ + int s = qup % QUP_WRAP1_S0; + struct sc7180_qupv3_clock *qup_clk = qup < QUP_WRAP1_S0 ? + (struct sc7180_qupv3_clock *)&gcc->qup_wrap0_s[s] : + (struct sc7180_qupv3_clock *)&gcc->qup_wrap1_s[s]; + + clock_configure(&qup_clk->clk, qup_cfg, hz, ARRAY_SIZE(qup_cfg)); +} + +void clock_enable_qup(int qup) +{ + int s = qup % QUP_WRAP1_S0; + int clk_en_off = qup < QUP_WRAP1_S0 ? + QUPV3_WRAP0_CLK_ENA_S(s) : QUPV3_WRAP1_CLK_ENA_S(s); + struct sc7180_qupv3_clock *qup_clk = qup < QUP_WRAP1_S0 ? + &gcc->qup_wrap0_s[s] : &gcc->qup_wrap1_s[s]; + + clock_enable_vote(&qup_clk->clk, &gcc->apcs_clk_br_en1, + clk_en_off); +} + +void clock_init(void) +{ + clock_configure_gpll0(); + + clock_enable_vote(&gcc->qup_wrap0_core_2x_cbcr, + &gcc->apcs_clk_br_en1, + QUPV3_WRAP0_CORE_2X_CLK_ENA); + clock_enable_vote(&gcc->qup_wrap0_core_cbcr, + &gcc->apcs_clk_br_en1, + QUPV3_WRAP0_CORE_CLK_ENA); + clock_enable_vote(&gcc->qup_wrap0_m_ahb_cbcr, + &gcc->apcs_clk_br_en1, + QUPV3_WRAP_0_M_AHB_CLK_ENA); + clock_enable_vote(&gcc->qup_wrap0_s_ahb_cbcr, + &gcc->apcs_clk_br_en1, + QUPV3_WRAP_0_S_AHB_CLK_ENA); + + clock_enable_vote(&gcc->qup_wrap1_core_2x_cbcr, + &gcc->apcs_clk_br_en1, + QUPV3_WRAP1_CORE_2X_CLK_ENA); + clock_enable_vote(&gcc->qup_wrap1_core_cbcr, + &gcc->apcs_clk_br_en1, + QUPV3_WRAP1_CORE_CLK_ENA); + clock_enable_vote(&gcc->qup_wrap1_m_ahb_cbcr, + &gcc->apcs_clk_br_en1, + QUPV3_WRAP_1_M_AHB_CLK_ENA); + clock_enable_vote(&gcc->qup_wrap1_s_ahb_cbcr, + &gcc->apcs_clk_br_en1, + QUPV3_WRAP_1_S_AHB_CLK_ENA); +} diff --git a/src/soc/qualcomm/sc7180/include/soc/addressmap.h b/src/soc/qualcomm/sc7180/include/soc/addressmap.h index 93f0481..308b2fb 100644 --- a/src/soc/qualcomm/sc7180/include/soc/addressmap.h +++ b/src/soc/qualcomm/sc7180/include/soc/addressmap.h @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (c) 2018-2019 Qualcomm Technologies + * Copyright (c) 2019 Qualcomm Technologies * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -18,4 +18,8 @@ #include <stdint.h> -#endif /* _SOC_QUALCOMM_SC7180_ADDRESS_MAP_H_ */ +#define AOSS_CC_BASE 0x0C2A0000 +#define GCC_BASE 0x00100000 +#define QSPI_BASE 0x088DC000 + +#endif /* __SOC_QUALCOMM_SC7180_ADDRESS_MAP_H__ */ diff --git a/src/soc/qualcomm/sc7180/include/soc/clock.h b/src/soc/qualcomm/sc7180/include/soc/clock.h new file mode 100644 index 0000000..d90779b --- /dev/null +++ b/src/soc/qualcomm/sc7180/include/soc/clock.h @@ -0,0 +1,204 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2019 Qualcomm Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <soc/addressmap.h> +#include <types.h> + +#ifndef __SOC_QUALCOMM_SC7180_CLOCK_H__ +#define __SOC_QUALCOMM_SC7180_CLOCK_H__ + +#define QUPV3_WRAP_0_M_AHB_CLK_ENA 6 +#define QUPV3_WRAP_0_S_AHB_CLK_ENA 7 +#define QUPV3_WRAP0_CORE_2X_CLK_ENA 9 +#define QUPV3_WRAP0_CORE_CLK_ENA 8 +#define QUPV3_WRAP1_CORE_2X_CLK_ENA 18 +#define QUPV3_WRAP1_CORE_CLK_ENA 19 +#define QUPV3_WRAP_1_M_AHB_CLK_ENA 20 +#define QUPV3_WRAP_1_S_AHB_CLK_ENA 21 +#define QUPV3_WRAP0_CLK_ENA_S(idx) (10 + idx) +#define QUPV3_WRAP1_CLK_ENA_S(idx) (22 + idx) + +#define GPLL0_EVEN_HZ (300 * MHz) +#define GPLL0_MAIN_HZ (600 * MHz) +#define QUP_WRAP_CORE_2X_19_2MHZ (19200 * KHz) + +#define SRC_XO_19_2MHZ 0 +#define SRC_GPLL0_MAIN_600MHZ 1 +#define SRC_GPLL0_EVEN_300MHZ 6 + +#define AOP_RESET_SHFT 0 +#define RCG_MODE_DUAL_EDGE 2 + +struct sc7180_rcg { + u32 cmd; + u32 cfg; +}; + +struct sc7180_clock { + u32 cbcr; + struct sc7180_rcg rcg; + u32 m; + u32 n; + u32 d_2; +}; + +struct sc7180_qupv3_clock { + struct sc7180_clock clk; + u8 _res[0x130 - 0x18]; +}; + +struct sc7180_gpll { + u32 mode; + u32 l_val; + u32 cal_l_val; + u32 user_ctl; + u32 user_ctl_u; + u32 config_ctl; + u32 config_ctl_u; + u32 test_ctl; + u32 test_ctl_u; + u8 _res[0x1000 - 0x24]; +}; + +struct sc7180_gcc { + struct sc7180_gpll gpll0; + u8 _res0[0xf000 - 0x1000]; + u32 usb30_prim_bcr; + u8 _res3[0x17000 - 0xf004]; + u32 qup_wrap0_bcr; + u32 qup_wrap0_m_ahb_cbcr; + u32 qup_wrap0_s_ahb_cbcr; + u32 qup_wrap0_core_cbcr; + u32 qup_wrap0_core_cdivr; + u32 qup_wrap0_core_2x_cbcr; + struct sc7180_rcg qup_wrap0_core_2x; + u8 _res4[0x17030 - 0x17020]; + struct sc7180_qupv3_clock qup_wrap0_s[6]; + u8 _res5[0x18000 - 0x17750]; + u32 qup_wrap1_bcr; + u32 qup_wrap1_core_2x_cbcr; + u32 qup_wrap1_core_cbcr; + u32 qup_wrap1_m_ahb_cbcr; + u32 qup_wrap1_s_ahb_cbcr; + struct sc7180_qupv3_clock qup_wrap1_s[6]; + u8 _res6[0x18994 - 0x18734]; + u32 qup_wrap1_core_cdivr; + u8 _res7[0x4b000 - 0x18998]; + u32 qspi_bcr; + u32 qspi_cnoc_ahb_cbcr; + u32 qspi_core_cbcr; + struct sc7180_rcg qspi_core; + u8 _res8[0x50000 - 0x4b014]; + u32 usb3_phy_prim_bcr; + u32 usb3phy_phy_prim_bcr; + u32 usb3_dp_phy_prim_bcr; + u32 usb3_phy_sec_bcr; + u32 usb3phy_phy_sec_bcr; + u32 usb3_dp_phy_sec_bcr; + u8 _res9[0x52008 - 0x50018]; + u32 apcs_clk_br_en1; + u8 _res10[0x1000000 - 0x5200c]; +}; + +struct sc7180_aoss { + u8 _res[0x5002c]; + u32 aoss_cc_apcs_misc; +}; + +enum clk_ctl_gpll_user_ctl { + CLK_CTL_GPLL_PLLOUT_EVEN_BMSK = 0x2, + CLK_CTL_GPLL_PLLOUT_MAIN_SHFT = 0, + CLK_CTL_GPLL_PLLOUT_EVEN_SHFT = 1, + CLK_CTL_GPLL_PLLOUT_ODD_SHFT = 2 +}; + +enum clk_ctl_cfg_rcgr { + CLK_CTL_CFG_HW_CTL_BMSK = 0x100000, + CLK_CTL_CFG_HW_CTL_SHFT = 20, + CLK_CTL_CFG_MODE_BMSK = 0x3000, + CLK_CTL_CFG_MODE_SHFT = 12, + CLK_CTL_CFG_SRC_SEL_BMSK = 0x700, + CLK_CTL_CFG_SRC_SEL_SHFT = 8, + CLK_CTL_CFG_SRC_DIV_BMSK = 0x1F, + CLK_CTL_CFG_SRC_DIV_SHFT = 0 +}; + +enum clk_ctl_cmd_rcgr { + CLK_CTL_CMD_ROOT_OFF_BMSK = 0x80000000, + CLK_CTL_CMD_ROOT_OFF_SHFT = 31, + CLK_CTL_CMD_ROOT_EN_BMSK = 0x2, + CLK_CTL_CMD_ROOT_EN_SHFT = 1, + CLK_CTL_CMD_UPDATE_BMSK = 0x1, + CLK_CTL_CMD_UPDATE_SHFT = 0 +}; + +enum clk_ctl_cbcr { + CLK_CTL_CBC_CLK_OFF_BMSK = 0x80000000, + CLK_CTL_CBC_CLK_OFF_SHFT = 31, + CLK_CTL_CBC_CLK_EN_BMSK = 0x1, + CLK_CTL_CBC_CLK_EN_SHFT = 0 +}; + +enum clk_ctl_rcg_mnd { + CLK_CTL_RCG_MND_BMSK = 0xFFFF, + CLK_CTL_RCG_MND_SHFT = 0, +}; + +enum clk_ctl_bcr { + CLK_CTL_BCR_BLK_ARES_BMSK = 0x1, + CLK_CTL_BCR_BLK_ARES_SHFT = 0, +}; + +enum clk_qup { + QUP_WRAP0_S0, + QUP_WRAP0_S1, + QUP_WRAP0_S2, + QUP_WRAP0_S3, + QUP_WRAP0_S4, + QUP_WRAP0_S5, + QUP_WRAP1_S0, + QUP_WRAP1_S1, + QUP_WRAP1_S2, + QUP_WRAP1_S3, + QUP_WRAP1_S4, + QUP_WRAP1_S5, +}; + +struct clock_config { + uint32_t hz; + uint8_t src; + uint8_t div; + uint16_t m; + uint16_t n; + uint16_t d_2; +}; + +struct mdss_clock_config { + const char *clk_name; + uintptr_t rcgr; + uintptr_t cbcr; +}; + +static struct sc7180_gcc *const gcc = (void *)GCC_BASE; +static struct sc7180_aoss *const aoss = (void *)AOSS_CC_BASE; + +void clock_init(void); +void clock_reset_aop(void); +void clock_configure_qspi(uint32_t hz); +int clock_reset_bcr(void *bcr_addr, bool reset); +void clock_configure_qup(int qup, uint32_t hz); +void clock_enable_qup(int qup); + +#endif // __SOC_QUALCOMM_SC7180_CLOCK_H__ -- To view, visit https://review.coreboot.org/c/coreboot/+/35496 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-Change-Id: I3f39252c887c36e8af43bc49289795000e4638d8 Gerrit-Change-Number: 35496 Gerrit-PatchSet: 1 Gerrit-Owner: mturney mturney <mturney(a)codeaurora.org> Gerrit-MessageType: newchange

5 21

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit September 2019