coreboot-gerrit December 2017

coreboot-gerrit@coreboot.org

1 participants
1557 discussions

Change in coreboot[master]: mainboard/asus/am1i-a: add support for board ASUS AM1I-A
by build bot (Jenkins) (Code Review) 27 Dec '17

27 Dec '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/23000 ) Change subject: mainboard/asus/am1i-a: add support for board ASUS AM1I-A ...................................................................... Patch Set 1: Verified-1 Build Failed https://qa.coreboot.org/job/coreboot-gerrit/65041/ : FAILURE https://qa.coreboot.org/job/coreboot-checkpatch/19797/ : SUCCESS -- To view, visit https://review.coreboot.org/23000 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-MessageType: comment Gerrit-Change-Id: I325b5ed32275bd7c8c706832323322cbed6f7b92 Gerrit-Change-Number: 23000 Gerrit-PatchSet: 1 Gerrit-Owner: Gergely Kiss <mail.gery(a)gmail.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Comment-Date: Wed, 27 Dec 2017 11:18:53 +0000 Gerrit-HasComments: No Gerrit-HasLabels: Yes

1 0

Change in coreboot[master]: mainboard/asus/am1i-a: add support for board ASUS AM1I-A
by Gergely Kiss (Code Review) 27 Dec '17

27 Dec '17

Gergely Kiss has uploaded this change for review. ( https://review.coreboot.org/23000 Change subject: mainboard/asus/am1i-a: add support for board ASUS AM1I-A ...................................................................... mainboard/asus/am1i-a: add support for board ASUS AM1I-A Adding code to support the board ASUS AM1I-A. Tested with multiple payloads and OSes with satisfactory results. Details are going to be published on the board's status page. Change-Id: I325b5ed32275bd7c8c706832323322cbed6f7b92 Signed-off-by: Gergely Kiss <mail.gery(a)gmail.com> --- A src/mainboard/asus/am1i-a/BiosCallOuts.c A src/mainboard/asus/am1i-a/Kconfig A src/mainboard/asus/am1i-a/Kconfig.name A src/mainboard/asus/am1i-a/Makefile.inc A src/mainboard/asus/am1i-a/OemCustomize.c A src/mainboard/asus/am1i-a/OptionsIds.h A src/mainboard/asus/am1i-a/acpi/AmdImc.asl A src/mainboard/asus/am1i-a/acpi/flag0.asl A src/mainboard/asus/am1i-a/acpi/gpe.asl A src/mainboard/asus/am1i-a/acpi/ide.asl A src/mainboard/asus/am1i-a/acpi/mainboard.asl A src/mainboard/asus/am1i-a/acpi/routing.asl A src/mainboard/asus/am1i-a/acpi/sata.asl A src/mainboard/asus/am1i-a/acpi/si.asl A src/mainboard/asus/am1i-a/acpi/sio.asl A src/mainboard/asus/am1i-a/acpi/sleep.asl A src/mainboard/asus/am1i-a/acpi/superio.asl A src/mainboard/asus/am1i-a/acpi/thermal.asl A src/mainboard/asus/am1i-a/acpi/usb_oc.asl A src/mainboard/asus/am1i-a/acpi_tables.c A src/mainboard/asus/am1i-a/board_info.txt A src/mainboard/asus/am1i-a/buildOpts.c A src/mainboard/asus/am1i-a/cmos.default A src/mainboard/asus/am1i-a/cmos.layout A src/mainboard/asus/am1i-a/devicetree.cb A src/mainboard/asus/am1i-a/dsdt.asl A src/mainboard/asus/am1i-a/irq_tables.c A src/mainboard/asus/am1i-a/mainboard.c A src/mainboard/asus/am1i-a/mptable.c A src/mainboard/asus/am1i-a/romstage.c 30 files changed, 2,903 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/00/23000/1 diff --git a/src/mainboard/asus/am1i-a/BiosCallOuts.c b/src/mainboard/asus/am1i-a/BiosCallOuts.c new file mode 100644 index 0000000..9588f8c --- /dev/null +++ b/src/mainboard/asus/am1i-a/BiosCallOuts.c @@ -0,0 +1,150 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2015 Sergej Ivanov <getinaks(a)gmail.com> + * Copyright (C) 2017 Gergely Kiss <mail.gery(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia.h> +#include "AGESA.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include <northbridge/amd/agesa/state_machine.h> +#include "FchPlatform.h" +#include "cbfs.h" +#include <stdlib.h> +#include <pc80/mc146818rtc.h> +#include <types.h> + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, + {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/** + * CODEC Initialization Table for Azalia HD Audio using Realtek ALC887-VD chip (from linux, running under vendor bios) + */ +const CODEC_ENTRY Alc887_VerbTbl[] = +{ + { 0x11, 0x40330000 }, + { 0x12, 0x411111f0 }, + { 0x14, 0x01014010 }, + { 0x15, 0x411111f0 }, + { 0x16, 0x411111f0 }, + { 0x17, 0x411111f0 }, + { 0x18, 0x01a19030 }, + { 0x19, 0x02a19040 }, + { 0x1a, 0x0181303f }, + { 0x1b, 0x02214020 }, + { 0x1c, 0x411111f0 }, + { 0x1d, 0x4024c601 }, + { 0x1e, 0x411111f0 }, + { 0x1f, 0x411111f0 } +}; + + +static const CODEC_TBL_LIST CodecTableList[] = +{ + {0x10ec0662, (CODEC_ENTRY*)&Alc887_VerbTbl[0]}, + {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} +}; + +#define FAN_INPUT_INTERNAL_DIODE 0 +#define FAN_INPUT_TEMP0 1 +#define FAN_INPUT_TEMP1 2 +#define FAN_INPUT_TEMP2 3 +#define FAN_INPUT_TEMP3 4 +#define FAN_INPUT_TEMP0_FILTER 5 +#define FAN_INPUT_ZERO 6 +#define FAN_INPUT_DISABLED 7 + +#define FAN_AUTOMODE (1 << 0) +#define FAN_LINEARMODE (1 << 1) +#define FAN_STEPMODE ~(1 << 1) +#define FAN_POLARITY_HIGH (1 << 2) +#define FAN_POLARITY_LOW ~(1 << 2) + +/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ +#define FREQ_28KHZ 0x0 +#define FREQ_25KHZ 0x1 +#define FREQ_23KHZ 0x2 +#define FREQ_21KHZ 0x3 +#define FREQ_29KHZ 0x4 +#define FREQ_18KHZ 0x5 +#define FREQ_100HZ 0xF7 +#define FREQ_87HZ 0xF8 +#define FREQ_58HZ 0xF9 +#define FREQ_44HZ 0xFA +#define FREQ_35HZ 0xFB +#define FREQ_29HZ 0xFC +#define FREQ_22HZ 0xFD +#define FREQ_14HZ 0xFE +#define FREQ_11HZ 0xFF + +void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset) +{ + FchParams_reset->LegacyFree = IS_ENABLED(CONFIG_HUDSON_LEGACY_FREE); + FchParams_reset->Mode = 6; + + /* Read SATA speed setting from CMOS */ + enum cb_err ret; + ret = get_option(&FchParams_reset->SataSetMaxGen2, "sata_speed"); + if (ret != CB_SUCCESS) { + FchParams_reset->SataSetMaxGen2 = 0; + printk(BIOS_DEBUG, "ERROR: cannot read CMOS setting, falling back to default. Error code: %x\n", (int)ret); + } + printk(BIOS_DEBUG, "Force SATA 3Gbps mode = %x\n", FchParams_reset->SataSetMaxGen2); +} + +void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env) +{ + /* Azalia Controller OEM Codec Table Pointer */ + FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); + + /* Fan Control */ + FchParams_env->Imc.ImcEnable = FALSE; + FchParams_env->Hwm.HwMonitorEnable = FALSE; + FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */ + + /* Read SATA controller mode from CMOS */ + enum cb_err ret; + ret = get_option(&FchParams_env->Sata.SataClass, "sata_mode"); + if ( ret != CB_SUCCESS) { + FchParams_env->Sata.SataClass = 0; + printk(BIOS_DEBUG, "ERROR: cannot read CMOS setting, falling back to default. Error code: %x\n", (int)ret); + } + + switch ((SATA_CLASS)FchParams_env->Sata.SataClass) { // code from olivehillplus (ft3b) - only one place where sata is configured + case SataLegacyIde: + case SataRaid: + case SataAhci: + case SataAhci7804: + FchParams_env->Sata.SataIdeMode = FALSE; + printk(BIOS_DEBUG, "AHCI or RAID or IDE = %x\n", FchParams_env->Sata.SataClass); + break; + + case SataIde2Ahci: + case SataIde2Ahci7804: + default: /* SataNativeIde */ + FchParams_env->Sata.SataIdeMode = TRUE; + printk(BIOS_DEBUG, "IDE2AHCI = %x\n", FchParams_env->Sata.SataClass); + break; + } +} diff --git a/src/mainboard/asus/am1i-a/Kconfig b/src/mainboard/asus/am1i-a/Kconfig new file mode 100644 index 0000000..c9a94af --- /dev/null +++ b/src/mainboard/asus/am1i-a/Kconfig @@ -0,0 +1,56 @@ +if BOARD_ASUS_AM1I_A + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select CPU_AMD_AGESA_FAMILY16_KB + select FORCE_AM1_SOCKET_SUPPORT + select GFXUMA + select HAVE_OPTION_TABLE + select USE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB + select SOUTHBRIDGE_AMD_AGESA_YANGTZE + select SUPERIO_ITE_IT8623E + +config MAINBOARD_DIR + string + default asus/am1i-a + +config MAINBOARD_PART_NUMBER + string + default "AM1I-A" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 9 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS_ID + string + default "1002,9836" + +config HUDSON_LEGACY_FREE + bool + default n + +endif # BOARD_ASUS_AM1I_A diff --git a/src/mainboard/asus/am1i-a/Kconfig.name b/src/mainboard/asus/am1i-a/Kconfig.name new file mode 100644 index 0000000..840e821 --- /dev/null +++ b/src/mainboard/asus/am1i-a/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_ASUS_AM1I_A + bool "AM1I-A" diff --git a/src/mainboard/asus/am1i-a/Makefile.inc b/src/mainboard/asus/am1i-a/Makefile.inc new file mode 100644 index 0000000..f8895fa --- /dev/null +++ b/src/mainboard/asus/am1i-a/Makefile.inc @@ -0,0 +1,22 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +romstage-y += buildOpts.c +romstage-y += BiosCallOuts.c +romstage-y += OemCustomize.c + +ramstage-y += buildOpts.c +ramstage-y += BiosCallOuts.c +ramstage-y += OemCustomize.c diff --git a/src/mainboard/asus/am1i-a/OemCustomize.c b/src/mainboard/asus/am1i-a/OemCustomize.c new file mode 100644 index 0000000..80528c3 --- /dev/null +++ b/src/mainboard/asus/am1i-a/OemCustomize.c @@ -0,0 +1,157 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "AGESA.h" +#include <PlatformMemoryConfiguration.h> + +#include <northbridge/amd/agesa/state_machine.h> + +static const PCIe_PORT_DESCRIPTOR PortList[] = { + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 3, 3), + PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 5, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x01, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 2, 2), + PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 4, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x02, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 1, 1), + PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 3, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x03, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 0, 0), + PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 2, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x04, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */ + { + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 7), + PCIE_PORT_DATA_INITIALIZER_V2(PortEnabled, ChannelTypeExt6db, 2, 1, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x05, 0) + } +}; + +static const PCIe_DDI_DESCRIPTOR DdiList[] = { + /* DP0 to HDMI0/DP */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 8, 11), + PCIE_DDI_DATA_INITIALIZER(ConnectorTypeHDMI, Aux1, Hdp1) + }, + /* DP1 to FCH */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 12, 15), + PCIE_DDI_DATA_INITIALIZER(ConnectorTypeHDMI, Aux2, Hdp2) + }, + /* DP2 to HDMI1/DP */ + { + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 16, 19), + PCIE_DDI_DATA_INITIALIZER(ConnectorTypeCrt, Aux3, Hdp3) + }, +}; + +static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { + .Flags = DESCRIPTOR_TERMINATE_LIST, + .SocketId = 0, + .PciePortList = PortList, + .DdiLinkList = DdiList +}; + + +void board_BeforeInitReset(struct sysinfo *cb, AMD_RESET_PARAMS *Reset) +{ + FCH_RESET_INTERFACE *FchReset = &Reset->FchInterface; + + FchReset->Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchReset->Xhci1Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + + FchReset->SataEnable = 1; + FchReset->IdeEnable = 0; +} + +void board_BeforeInitEarly(struct sysinfo *cb, AMD_EARLY_PARAMS *InitEarly) +{ + InitEarly->GnbConfig.PcieComplexList = &PcieComplex; +} + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +static CONST PSO_ENTRY ROMDATA PlatformMemoryTable[] = { + #define SEED_A 0x12 + HW_RXEN_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, + SEED_A), + + NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, 1), + MOTHER_BOARD_LAYERS(LAYERS_4), + + MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ + ODT_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), + CS_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + +void board_BeforeInitPost(struct sysinfo *cb, AMD_POST_PARAMS *InitPost) +{ + InitPost->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *)PlatformMemoryTable; +} + +void board_BeforeInitMid(struct sysinfo *cb, AMD_MID_PARAMS *InitMid) +{ + /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ + InitMid->GnbMidConfiguration.iGpuVgaMode = 0; +} diff --git a/src/mainboard/asus/am1i-a/OptionsIds.h b/src/mainboard/asus/am1i-a/OptionsIds.h new file mode 100644 index 0000000..eaf2442 --- /dev/null +++ b/src/mainboard/asus/am1i-a/OptionsIds.h @@ -0,0 +1,59 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_CONTROL_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE +//#define IDSOPT_PERF_ANALYSIS TRUE +#define IDSOPT_ASSERT_ENABLED TRUE +//#undef IDSOPT_DEBUG_ENABLED +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/asus/am1i-a/acpi/AmdImc.asl b/src/mainboard/asus/am1i-a/acpi/AmdImc.asl new file mode 100644 index 0000000..aa941ba --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/AmdImc.asl @@ -0,0 +1,110 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +//BTDC Due to IMC Fan, ACPI control codes +OperationRegion(IMIO, SystemIO, 0x3E, 0x02) +Field(IMIO , ByteAcc, NoLock, Preserve) { + IMCX,8, + IMCA,8 +} + +IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { + Offset(0x80), + MSTI, 8, + MITS, 8, + MRG0, 8, + MRG1, 8, + MRG2, 8, + MRG3, 8, +} + +Method(WACK, 0) +{ + Store(0, Local0) + While (LNotEqual(Local0, 0xFA)) { + Store(MRG0, Local0) + Sleep(10) + } +} + +//Init +Method (ITZE, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} + +//Sleep +Method (IMSP, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(1, MRG1) + Store(0, MRG2) + Store(0x98, MSTI) + WACK() + + Store(0, MRG0) + Store(0xB4, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() +} + +//Wake +Method (IMWK, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} diff --git a/src/mainboard/asus/am1i-a/acpi/flag0.asl b/src/mainboard/asus/am1i-a/acpi/flag0.asl new file mode 100644 index 0000000..ca3b4fd --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/flag0.asl @@ -0,0 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100) + +Field (GRAM, ByteAcc, Lock, Preserve) +{ + Offset (0x10), + FLG0, 8 +} diff --git a/src/mainboard/asus/am1i-a/acpi/gpe.asl b/src/mainboard/asus/am1i-a/acpi/gpe.asl new file mode 100644 index 0000000..9a84698 --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/gpe.asl @@ -0,0 +1,74 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Scope(\_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\\_GPE\\_L00\n") */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\\_GPE\\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\\_GPE\\_L09\n") */ + /* Notify (\_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\\_GPE\\_L0B\n") */ + Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\\_GPE\\_L10\n") */ + } + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\\_GPE\\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\\_GPE\\_L18\n") */ + Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\\_GPE\\_L1B\n") */ + Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ diff --git a/src/mainboard/asus/am1i-a/acpi/ide.asl b/src/mainboard/asus/am1i-a/acpi/ide.asl new file mode 100644 index 0000000..52d85ab --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/ide.asl @@ -0,0 +1,245 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* No IDE functionality */ + + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + /* save total time of primary PIO master timing to PIO spd0 */ + Store(GTTM(PPTM), PSD0) + /* save total time of primary PIO slave Timing to PIO spd1 */ + Store(GTTM(PPTS), PSD1) + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/asus/am1i-a/acpi/mainboard.asl b/src/mainboard/asus/am1i-a/acpi/mainboard.asl new file mode 100644 index 0000000..68609d8 --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/mainboard.asl @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Memory related values */ +Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ +Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ +Name(PBLN, 0x0) /* Length of BIOS area */ + +Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ +Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ +Name(HPBA, 0xFED00000) /* Base address of HPET table */ + +/* Some global data */ +Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ +Name(OSV, Ones) /* Assume nothing */ +Name(PMOD, One) /* Assume APIC */ + +/* AcpiGpe0Blk */ +OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04) + Field(GP0B, ByteAcc, NoLock, Preserve) { + , 11, + USBS, 1, +} diff --git a/src/mainboard/asus/am1i-a/acpi/routing.asl b/src/mainboard/asus/am1i-a/acpi/routing.asl new file mode 100644 index 0000000..7cb7a2f --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/routing.asl @@ -0,0 +1,193 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - F16 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ + Package(){0x0001FFFF, 0, INTB, 0 }, + Package(){0x0001FFFF, 1, INTC, 0 }, + + + /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + + /* FCH devices */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ + /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, INTC, 0 }, + Package(){0x0010FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, + +}) + +Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - F15 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, 0, 44 }, + Package(){0x0001FFFF, 1, 0, 45 }, + + /* Bus 0, Dev 2 - PCIe Bridges */ + Package(){0x0002FFFF, 0, 0, 24 }, + Package(){0x0002FFFF, 1, 0, 25 }, + Package(){0x0002FFFF, 2, 0, 26 }, + Package(){0x0002FFFF, 3, 0, 27 }, + + + /* SB devices in APIC mode */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ + /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, 0, 0x12}, + Package(){0x0010FFFF, 1, 0, 0x11}, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + +}) + +Name(PS2, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APS2, Package(){ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, +}) + +/* GFX */ +Name(PS4, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 24 }, + Package(){0x0000FFFF, 1, 0, 25 }, + Package(){0x0000FFFF, 2, 0, 26 }, + Package(){0x0000FFFF, 3, 0, 27 }, +}) + +/* GPP 0 */ +Name(PS5, Package(){ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, +}) +Name(APS5, Package(){ + Package(){0x0000FFFF, 0, 0, 28 }, + Package(){0x0000FFFF, 1, 0, 29 }, + Package(){0x0000FFFF, 2, 0, 30 }, + Package(){0x0000FFFF, 3, 0, 31 }, +}) + +/* GPP 1 */ +Name(PS6, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APS6, Package(){ + Package(){0x0000FFFF, 0, 0, 32 }, + Package(){0x0000FFFF, 1, 0, 33 }, + Package(){0x0000FFFF, 2, 0, 34 }, + Package(){0x0000FFFF, 3, 0, 35 }, +}) + +/* GPP 2 */ +Name(PS7, Package(){ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, +}) +Name(APS7, Package(){ + Package(){0x0000FFFF, 0, 0, 36 }, + Package(){0x0000FFFF, 1, 0, 37 }, + Package(){0x0000FFFF, 2, 0, 38 }, + Package(){0x0000FFFF, 3, 0, 39 }, +}) + +/* GPP 3 */ +Name(PS8, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS8, Package(){ + Package(){0x0000FFFF, 0, 0, 40 }, + Package(){0x0000FFFF, 1, 0, 41 }, + Package(){0x0000FFFF, 2, 0, 42 }, + Package(){0x0000FFFF, 3, 0, 43 }, +}) diff --git a/src/mainboard/asus/am1i-a/acpi/sata.asl b/src/mainboard/asus/am1i-a/acpi/sata.asl new file mode 100644 index 0000000..c8cf86d --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/sata.asl @@ -0,0 +1,144 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + \_GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(\_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (\_SB.P0PR) { + if (LGreater(\_SB.P0IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P0PR) + } + + if (\_SB.P1PR) { + if (LGreater(\_SB.P1IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P1PR) + } + + if (\_SB.P2PR) { + if (LGreater(\_SB.P2IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P2PR) + } + + if (\_SB.P3PR) { + if (LGreater(\_SB.P3IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P3PR) + } + } +} diff --git a/src/mainboard/asus/am1i-a/acpi/si.asl b/src/mainboard/asus/am1i-a/acpi/si.asl new file mode 100644 index 0000000..2923471 --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/si.asl @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +Scope(\_SI) { + Method(_SST, 1) { + /* DBGO("\\_SI\\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } +} /* End Scope SI */ diff --git a/src/mainboard/asus/am1i-a/acpi/sio.asl b/src/mainboard/asus/am1i-a/acpi/sio.asl new file mode 100644 index 0000000..b423af5 --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/sio.asl @@ -0,0 +1,87 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +OperationRegion (IOID, SystemIO, 0x2E, 0x02) +Field (IOID, ByteAcc, NoLock, Preserve) +{ + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ +} + +IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) +{ + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ +} + +/* Enter the 8728 Config */ +Method (EPNP) +{ + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) +} + +/* Exit the 8728 Config */ +Method (XPNP) +{ + Store (0x02, SIOI) + Store (0x02, SIOD) +} + +/* + * Keyboard PME is routed to SB700 Gevent3. We can wake + * up the system by pressing the key. + */ +Method (SIOS, 1) +{ + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("8728F\n") */ + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + XPNP() + } +} +Method (SIOW, 1) +{ + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() +} diff --git a/src/mainboard/asus/am1i-a/acpi/sleep.asl b/src/mainboard/asus/am1i-a/acpi/sleep.asl new file mode 100644 index 0000000..1225a62 --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/sleep.asl @@ -0,0 +1,93 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* \_PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ + +External(\_SB.APTS, MethodObj) +External(\_SB.AWAK, MethodObj) + +Method(_PTS, 1) { + /* DBGO("\\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + Store(7, UPWS) + \_SB.APTS(Arg0) +} /* End Method(\_PTS) */ + +/* +* \_BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(\_BFS, 1) { + /* DBGO("\\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* \_WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(\_WAK, 1) { + /* DBGO("\\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + Store(1,USBS) + + \_SB.AWAK(Arg0) + + Return(WKST) +} /* End Method(\_WAK) */ diff --git a/src/mainboard/asus/am1i-a/acpi/superio.asl b/src/mainboard/asus/am1i-a/acpi/superio.asl new file mode 100644 index 0000000..d3144e5 --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/superio.asl @@ -0,0 +1,125 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2015 Sergej Ivanov <getinaks(a)gmail.com> + * Copyright (C) 2017 Gergely Kiss <mail.gery(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// Scope is \_SB.PCI0.LPCB + +// Values, defined here, must match settings in devicetree.cb + +Device (PS2M) { + Name (_HID, EisaId ("PNP0F13")) + Name (_CRS, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x00, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x00, 0x01) + IRQNoFlags () {12} + }) + Method (_STA, 0, NotSerialized) { + And (FLG0, 0x04, Local0) + If (LEqual (Local0, 0x04)) { + Return (0x0F) + } Else { + Return (0x00) + } + } +} + +Device (PS2K) { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) { + And (FLG0, 0x04, Local0) + If (LEqual (Local0, 0x04)) { + Return (0x0F) + } Else { + Return (0x00) + } + } + Name (_CRS, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x00, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x00, 0x01) + IRQNoFlags () {1} + }) +} + +Device (COM1) { + Name (_HID, EISAID ("PNP0501")) + Name (_UID, 1) + Method (_STA, 0, NotSerialized) { + And (FLG0, 0x04, Local0) + If (LEqual (Local0, 0x04)) { + Return (0x0F) + } Else { + Return (0x00) + } + } + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08) + IRQNoFlags () {4} + }) + Name (_PRS, ResourceTemplate () + { + IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08) + IRQNoFlags () {4} + }) +} + +Device (COM2) { + Name (_HID, EISAID ("PNP0501")) + Name (_UID, 2) + Method (_STA, 0, NotSerialized) { + And (FLG0, 0x04, Local0) + If (LEqual (Local0, 0x04)) { + Return (0x0F) + } Else { + Return (0x00) + } + } + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08) + IRQNoFlags () {3} + }) + Name (_PRS, ResourceTemplate () + { + IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08) + IRQNoFlags () {3} + }) +} + +Device (LPT1) { + Name (_HID, EISAID ("PNP0401")) + Name (_UID, 1) + Method (_STA, 0, NotSerialized) { + And (FLG0, 0x04, Local0) + If (LEqual (Local0, 0x04)) { + Return (0x0F) + } Else { + Return (0x00) + } + } + Name (_CRS, ResourceTemplate () + { + IO (Decode16, 0x0378, 0x0378, 0x04, 0x08) + IO (Decode16, 0x0778, 0x0778, 0x04, 0x08) + IRQNoFlags () {5} + }) + Name (_PRS, ResourceTemplate () + { + IO (Decode16, 0x0378, 0x378, 0x04, 0x08) + IO (Decode16, 0x0778, 0x778, 0x04, 0x08) + IRQNoFlags () {5} + }) +} diff --git a/src/mainboard/asus/am1i-a/acpi/thermal.asl b/src/mainboard/asus/am1i-a/acpi/thermal.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/thermal.asl diff --git a/src/mainboard/asus/am1i-a/acpi/usb_oc.asl b/src/mainboard/asus/am1i-a/acpi/usb_oc.asl new file mode 100644 index 0000000..42785f8 --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi/usb_oc.asl @@ -0,0 +1,128 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) + +/* USB Overcurrent GPEs */ + +#if 0 /* TODO: Update for am1ml */ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (\_GPE) { + Method (_L13) { + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (\_GPE) { + Method (_L14) { + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (\_GPE) { + Method (_L15) { + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (\_GPE) { + Method (_L16) { + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (\_GPE) { + Method (_L19) { + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (\_GPE) { + Method (_L1A) { + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (\_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (\_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (\_GPE) { + Method (_L17) { + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (\_GPE) { + Method (_L0E) { + } + } +} +#endif diff --git a/src/mainboard/asus/am1i-a/acpi_tables.c b/src/mainboard/asus/am1i-a/acpi_tables.c new file mode 100644 index 0000000..4779313 --- /dev/null +++ b/src/mainboard/asus/am1i-a/acpi_tables.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> + + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write Yangtze IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, + IO_APIC_ADDR, 0); + + /* TODO: Remove the hardcode */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1, + 0xFEC20000, 24); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); + /* 1: LINT1 connect to NMI */ + + return current; +} diff --git a/src/mainboard/asus/am1i-a/board_info.txt b/src/mainboard/asus/am1i-a/board_info.txt new file mode 100644 index 0000000..4873e82 --- /dev/null +++ b/src/mainboard/asus/am1i-a/board_info.txt @@ -0,0 +1,5 @@ +Category: mini +Board URL: https://www.asus.com/us/Motherboards/AM1IA/ +ROM package: DIP8 +ROM protocol: SPI +ROM socketed: y diff --git a/src/mainboard/asus/am1i-a/buildOpts.c b/src/mainboard/asus/am1i-a/buildOpts.c new file mode 100644 index 0000000..5e9b0d6 --- /dev/null +++ b/src/mainboard/asus/am1i-a/buildOpts.c @@ -0,0 +1,342 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + */ + +#include <stdlib.h> +#include "AGESA.h" + +#define INSTALL_FT3_SOCKET_SUPPORT TRUE +#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT TRUE + +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP2_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT FALSE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE +#define INSTALL_FM2_SOCKET_SUPPORT FALSE + + +#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT + #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE + #undef INSTALL_FT3_SOCKET_SUPPORT + #define INSTALL_FT3_SOCKET_SUPPORT FALSE + #endif +#endif + +//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_ECC_SUPPORT TRUE +//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +//#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE +#define BLDOPT_REMOVE_SRAT FALSE //TRUE +#define BLDOPT_REMOVE_SLIT FALSE //TRUE +#define BLDOPT_REMOVE_WHEA FALSE //TRUE +#define BLDOPT_REMOVE_CRAT TRUE +#define BLDOPT_REMOVE_CDIT TRUE +#define BLDOPT_REMOVE_DMI TRUE +//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE + +//This element selects whether P-States should be forced to be independent, +// as reported by the ACPI _PSD object. For single-link processors, +// setting TRUE for OS to support this feature. + +//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER +/* Build configuration values here. + */ +#define BLDCFG_VRM_CURRENT_LIMIT 15000 +#define BLDCFG_VRM_NB_CURRENT_LIMIT 13000 +#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 21000 +#define BLDCFG_VRM_SVI_OCP_LEVEL BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT +#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT 17000 +#define BLDCFG_VRM_NB_SVI_OCP_LEVEL BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_SLEW_RATE 10000 +#define BLDCFG_VRM_NB_SLEW_RATE BLDCFG_VRM_SLEW_RATE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE + +#define BLDCFG_PLAT_NUM_IO_APICS 3 +#define BLDCFG_GNB_IOAPIC_ADDRESS 0xFEC20000 +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_MEM_INIT_PSTATE 0 +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 // Specifies the IO addresses trapped by the + // core for C-state entry requests. A value + // of 0 in this field specifies that the core + // does not trap any IO addresses for C-state entry. + // Values greater than 0xFFF8 results in undefined behavior. +#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 + +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE + +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1600_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_RDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING FALSE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +#define BLDCFG_ONLINE_SPARE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM TRUE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +#define BLDCFG_ENABLE_ECC_FEATURE FALSE +#define BLDCFG_ECC_REDIRECTION FALSE +#define BLDCFG_SCRUB_DRAM_RATE 0 +#define BLDCFG_SCRUB_L2_RATE 0 +#define BLDCFG_SCRUB_L3_RATE 0 +#define BLDCFG_SCRUB_IC_RATE 0 +#define BLDCFG_SCRUB_DC_RATE 0 +#define BLDCFG_ECC_SYNC_FLOOD FALSE +#define BLDCFG_ECC_SYMBOL_SIZE 4 +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000ul +#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED +#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeDisabled +#define BLDCFG_IOMMU_SUPPORT FALSE +#define OPTION_GFX_INIT_SVIEW FALSE +//#define BLDCFG_PLATFORM_POWER_POLICY_MODE BatteryLife + +//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL OEM_LCD_BACK_LIGHT_CONTROL +#define BLDCFG_CFG_ABM_SUPPORT TRUE + +#define BLDCFG_CFG_GNB_HD_AUDIO TRUE +//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID +//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID +//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID + +#ifdef PCIEX_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20) +#endif + +#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' +#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +#define BLDCFG_PCIE_TRAINING_ALGORITHM PcieTrainingDistributed + +/* Process the options... + * This file include MUST occur AFTER the user option selection settings + */ +/* + * Customized OEM build configurations for FCH component + */ +// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 +// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 +// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 +// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 +// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 +// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 +// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 +// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 +// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 +// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 +// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 +// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 +// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 +// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 +// #define BLDCFG_AZALIA_SSID 0x780D1022 +// #define BLDCFG_SMBUS_SSID 0x780B1022 +// #define BLDCFG_IDE_SSID 0x780C1022 +// #define BLDCFG_SATA_AHCI_SSID 0x78011022 +// #define BLDCFG_SATA_IDE_SSID 0x78001022 +// #define BLDCFG_SATA_RAID5_SSID 0x78031022 +// #define BLDCFG_SATA_RAID_SSID 0x78021022 +// #define BLDCFG_EHCI_SSID 0x78081022 +// #define BLDCFG_OHCI_SSID 0x78071022 +// #define BLDCFG_LPC_SSID 0x780E1022 +// #define BLDCFG_SD_SSID 0x78061022 +// #define BLDCFG_XHCI_SSID 0x78121022 +// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE +// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 +// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE + +CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, + { CPU_LIST_TERMINAL } +}; + +#define BLDCFG_AP_MTRR_SETTINGS_LIST &KabiniApMtrrSettingsList + + +/* Include the files that instantiate the configuration definitions. */ +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "AdvancedApi.h" +#include "heapManager.h" +#include "CreateStruct.h" +#include "cpuFeatures.h" +#include "Table.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "GnbInterface.h" + + // This is the delivery package title, "BrazosPI" + // This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + + // This is the release version number of the AGESA component + // This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +//#define DDR400_FREQUENCY 200 ///< DDR 400 +//#define DDR533_FREQUENCY 266 ///< DDR 533 +//#define DDR667_FREQUENCY 333 ///< DDR 667 +//#define DDR800_FREQUENCY 400 ///< DDR 800 +//#define DDR1066_FREQUENCY 533 ///< DDR 1066 +//#define DDR1333_FREQUENCY 667 ///< DDR 1333 +//#define DDR1600_FREQUENCY 800 ///< DDR 1600 +//#define DDR1866_FREQUENCY 933 ///< DDR 1866 +//#define DDR2100_FREQUENCY 1050 ///< DDR 2100 +//#define DDR2133_FREQUENCY 1066 ///< DDR 2133 +//#define DDR2400_FREQUENCY 1200 ///< DDR 2400 +//#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency +// +///* QUANDRANK_TYPE*/ +//#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +//#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM +// +///* USER_MEMORY_TIMING_MODE */ +//#define TIMING_MODE_AUTO 0 ///< Use best rate possible +//#define TIMING_MODE_LIMITED 1 ///< Set user top limit +//#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed +// +///* POWER_DOWN_MODE */ +//#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +//#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 +#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 +#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 +#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 +#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 +#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 +#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 +#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 +#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 +#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 +#define DFLT_HPET_BASE_ADDRESS 0xFED00000 +#define DFLT_SMI_CMD_PORT 0xB0 +#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 +#define DFLT_GEC_BASE_ADDRESS 0xFED61000 +#define DFLT_AZALIA_SSID 0x780D1022 +#define DFLT_SMBUS_SSID 0x780B1022 +#define DFLT_IDE_SSID 0x780C1022 +#define DFLT_SATA_AHCI_SSID 0x78011022 +#define DFLT_SATA_IDE_SSID 0x78001022 +#define DFLT_SATA_RAID5_SSID 0x78031022 +#define DFLT_SATA_RAID_SSID 0x78021022 +#define DFLT_EHCI_SSID 0x78081022 +#define DFLT_OHCI_SSID 0x78071022 +#define DFLT_LPC_SSID 0x780E1022 +#define DFLT_SD_SSID 0x78061022 +#define DFLT_XHCI_SSID 0x78121022 +#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE +#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +#define DFLT_FCH_GPP_LINK_CONFIG PortA4 +#define DFLT_FCH_GPP_PORT0_PRESENT FALSE +#define DFLT_FCH_GPP_PORT1_PRESENT FALSE +#define DFLT_FCH_GPP_PORT2_PRESENT FALSE +#define DFLT_FCH_GPP_PORT3_PRESENT FALSE +#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE +//#define BLDCFG_IR_PIN_CONTROL 0x33 + +GPIO_CONTROL imba180_gpio[] = { + {183, Function1, GpioIn | GpioOutEnB | PullUpB}, + {-1} +}; +//#define BLDCFG_FCH_GPIO_CONTROL_LIST (&imba180_gpio[0]) + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +#include <PlatformInstall.h> diff --git a/src/mainboard/asus/am1i-a/cmos.default b/src/mainboard/asus/am1i-a/cmos.default new file mode 100644 index 0000000..dcacda6 --- /dev/null +++ b/src/mainboard/asus/am1i-a/cmos.default @@ -0,0 +1,4 @@ +boot_option=Fallback +debug_level=Spew +sata_mode=IDE +sata_speed=6Gbps diff --git a/src/mainboard/asus/am1i-a/cmos.layout b/src/mainboard/asus/am1i-a/cmos.layout new file mode 100644 index 0000000..854ed11 --- /dev/null +++ b/src/mainboard/asus/am1i-a/cmos.layout @@ -0,0 +1,63 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# Copyright (C) 2017 Gergely Kiss <mail.gery(a)gmail.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +#***************************************************************************** + +entries + +#start-bit length config config-ID name +0 384 r 0 reserved_memory +384 1 e 4 boot_option +388 4 r 0 reboot_counter +#392 3 r 0 unused +#400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 r 0 boot_index +432 8 r 0 boot_countdown +440 8 e 10 sata_mode +448 8 e 11 sata_speed +#728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + +enumerations + +#ID value text +#1 0 Disable +#1 1 Enable +4 0 Fallback +4 1 Normal +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +10 0 IDE +10 2 AHCI +11 1 3Gbps +11 0 6Gbps + +checksums + +checksum 392 455 984 diff --git a/src/mainboard/asus/am1i-a/devicetree.cb b/src/mainboard/asus/am1i-a/devicetree.cb new file mode 100644 index 0000000..30afd95 --- /dev/null +++ b/src/mainboard/asus/am1i-a/devicetree.cb @@ -0,0 +1,113 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2013 Advanced Micro Devices, Inc. +# Copyright (C) 2015 Sergej Ivanov <getinaks(a)gmail.com> +# Copyright (C) 2017 Gergely Kiss <mail.gery(a)gmail.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +chip northbridge/amd/agesa/family16kb/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/family16kb + device lapic 0 on end + end + end + + device domain 0 on + subsystemid 0x1043 0x8623 inherit + chip northbridge/amd/agesa/family16kb # CPU side of HT root complex + chip northbridge/amd/agesa/family16kb # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # mPCIe slot + device pci 2.3 on end # Realtek NIC + device pci 2.4 on end # Edge Connector + device pci 2.5 on end # Edge Connector + end #chip northbridge/amd/agesa/family16kb + + chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/ite/it8623e + device pnp 2e.0 off # FDC - not used + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + io 0x62 = 0x778 + irq 0x70 = 5 + drq 0x74 = 3 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 0x0 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0x0 + io 0x62 = 0x300 + io 0x64 = 0x0 + irq 0x70 = 0x0 + end + end #superio/ite/it8623e + end #device pci 14.3 # LPC + device pci 14.7 on end # SD + end #chip southbridge/amd/agesa/hudson + + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + register "spdAddrLookup" = " + { + { {0xA0, 0xA2} }, + }" + + end #chip northbridge/amd/agesa/family16kb # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/family16kb/root_complex diff --git a/src/mainboard/asus/am1i-a/dsdt.asl b/src/mainboard/asus/am1i-a/dsdt.asl new file mode 100644 index 0000000..281669c --- /dev/null +++ b/src/mainboard/asus/am1i-a/dsdt.asl @@ -0,0 +1,95 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * Copyright (C) 2015 Sergej Ivanov <getinaks(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Globals for the platform */ + #include "acpi/mainboard.asl" + + /* Describe the USB Overcurrent pins */ + #include "acpi/usb_oc.asl" + + /* PCI IRQ mapping for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> + + /* Describe the processor tree (\_PR) */ + #include <cpu/amd/agesa/family16kb/acpi/cpu.asl> + + /* Contains the supported sleep states for this chipset */ + #include <southbridge/amd/common/acpi/sleepstates.asl> + + /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ + #include "acpi/sleep.asl" + + /* stuff for sio */ + #include "acpi/flag0.asl" + + /* System Bus */ + Scope(\_SB) { /* Start \_SB scope */ + /* global utility methods expected within the \_SB scope */ + #include <arch/x86/acpi/globutil.asl> + + /* Describe IRQ Routing mapping for this platform (within the \_SB scope) */ + #include "acpi/routing.asl" + + Device(PWRB) { + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) + Name(_STA, 0x0B) + } + + Device(PCI0) { + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family16kb/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/fch.asl> + + /* sio fixup */ + #include "acpi/sio.asl" + } + + /* Describe PCI INT[A-H] for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> + + } /* End \_SB scope */ + + /* Describe SMBUS for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> + + /* Define the General Purpose Events for the platform */ + #include "acpi/gpe.asl" + + /* Define the Thermal zones and methods for the platform */ + #include "acpi/thermal.asl" + + /* Define the System Indicators for the platform */ + #include "acpi/si.asl" + +} +/* End of ASL file */ diff --git a/src/mainboard/asus/am1i-a/irq_tables.c b/src/mainboard/asus/am1i-a/irq_tables.c new file mode 100644 index 0000000..fb775dd --- /dev/null +++ b/src/mainboard/asus/am1i-a/irq_tables.c @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Gergely Kiss <mail.gery(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x14 << 3) | 0x3, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1002, /* Vendor */ + 0x439d, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x24, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x01 << 3) | 0x0, {{0x05, 0xccb0}, {0x06, 0xccb0}, {0x07, 0xccb0}, {0x08, 0xccb0}}, 0x0, 0x0}, + {0x00, (0x02 << 3) | 0x0, {{0x01, 0xccb0}, {0x02, 0xccb0}, {0x03, 0xccb0}, {0x04, 0xccb0}}, 0x0, 0x0}, + {0x00, (0x14 << 3) | 0x0, {{0x01, 0xccb0}, {0x02, 0xccb0}, {0x03, 0xccb0}, {0x04, 0xccb0}}, 0x0, 0x0}, + {0x00, (0x12 << 3) | 0x0, {{0x03, 0xccb0}, {0x02, 0xccb0}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x00, (0x13 << 3) | 0x0, {{0x03, 0xccb0}, {0x02, 0xccb0}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x00, (0x16 << 3) | 0x0, {{0x03, 0xccb0}, {0x02, 0xccb0}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x00, (0x10 << 3) | 0x0, {{0x03, 0xccb0}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x00, (0x11 << 3) | 0x0, {{0x04, 0xccb0}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x01, (0x00 << 3) | 0x0, {{0x01, 0xccb0}, {0x02, 0xccb0}, {0x03, 0xccb0}, {0x04, 0xccb0}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/asus/am1i-a/mainboard.c b/src/mainboard/asus/am1i-a/mainboard.c new file mode 100644 index 0000000..fc7dd1d --- /dev/null +++ b/src/mainboard/asus/am1i-a/mainboard.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC + * Copyright (C) 2015 Sergej Ivanov <getinaks(a)gmail.com> + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <device/device.h> +#include <southbridge/amd/agesa/hudson/pci_devs.h> +#include <southbridge/amd/agesa/hudson/amd_pci_int_defs.h> +#include <southbridge/amd/common/amd_pci_util.h> +#include <northbridge/amd/agesa/family16kb/pci_devs.h> + +const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { + /* INTA# - INTH# */ + [0x00] = 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F, + /* Misc-nil,0,1,2, INT from Serial irq */ + [0x08] = 0x5A,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + /* SCI, SMBUS0, ASF, HDA, FC, RSVD, PerMon, SD */ + [0x10] = 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F, // HDA was 1F - now 03 + /* IMC INT0 - 5 */ + [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, + /* USB Devs 18/19/22 INTA-C */ + [0x30] = 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05, + /* SATA & MISSING IDE */ + [0x40] = 0x04, 0x04 +}; + +const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { + /* INTA# - INTH# */ + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, + /* Misc-nil,0,1,2, INT from Serial irq */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon, SD */ + [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x1F, + /* IMC INT0 - 5 */ + [0x20] = 0x05,0x1F,0x1F,0x1F,0x1F,0x1F, + /* USB Devs 18/19/20/22 INTA-C */ + [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12, + /* SATA & MISSING IDE*/ + [0x40] = 0x11, 0x11 +}; + +/* + * This table defines the index into the picr/intr_data + * tables for each device. Any enabled device and slot + * that uses hardware interrupts should have an entry + * in this table to define its index into the FCH + * PCI_INTR register 0xC00/0xC01. This index will define + * the interrupt that it should use. Putting PIRQ_A into + * the PIN A index for a device will tell that device to + * use PIC IRQ 10 if it uses PIN A for its hardware INT. + */ +static const struct pirq_struct mainboard_pirq_data[] = { + /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */ + {GFX_DEVFN, {PIRQ_A, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */ + {ACTL_DEVFN,{PIRQ_NC, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* Audio: 01.1 */ + {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* x4 PCIe: 02.1 */ + {NB_PCIE_PORT2_DEVFN, {PIRQ_B, PIRQ_C, PIRQ_D, PIRQ_A}}, /* mPCIe: 02.2 */ + {NB_PCIE_PORT3_DEVFN, {PIRQ_C, PIRQ_D, PIRQ_A, PIRQ_B}}, /* NIC: 02.3 */ + {NB_PCIE_PORT4_DEVFN, {PIRQ_D, PIRQ_A, PIRQ_B, PIRQ_C}}, /* Edge: 02.4 */ + {NB_PCIE_PORT5_DEVFN, {PIRQ_E, PIRQ_F, PIRQ_G, PIRQ_H}}, /* Edge: 02.5 */ + {XHCI_DEVFN, {PIRQ_C, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* XHCI: 10.0 */ + {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */ + {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */ + {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */ + {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */ + {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */ + {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */ + {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */ + {LPC_DEVFN, {PIRQ_C, PIRQ_NC, PIRQ_NC, PIRQ_NC }}, /* LPC: 14.3 */ + {SD_DEVFN, {PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SD: 14.7 */ +}; + +const u8 *picr_data = mainboard_picr_data; +const u8 *intr_data = mainboard_intr_data; + +/* PIRQ Setup */ +static void pirq_setup(void) +{ + pirq_data_ptr = mainboard_pirq_data; + pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct); + intr_data_ptr = mainboard_intr_data; + picr_data_ptr = mainboard_picr_data; +} + +/********************************************** + * enable the dedicated function in mainboard. + **********************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + /* Initialize the PIRQ data structures for consumption */ + pirq_setup(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/asus/am1i-a/mptable.c b/src/mainboard/asus/am1i-a/mptable.c new file mode 100644 index 0000000..3866f2e --- /dev/null +++ b/src/mainboard/asus/am1i-a/mptable.c @@ -0,0 +1,164 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <southbridge/amd/common/amd_pci_util.h> +#include <drivers/generic/ioapic/chip.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF); + + /* Intialize the MP_Table */ + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + /* + * Type 0: Processor Entries: + * LAPIC ID, LAPIC Version, CPU Flags:EN/BP, + * CPU Signature (Stepping, Model, Family), + * Feature Flags + */ + smp_write_processors(mc); + + /* + * Type 1: Bus Entries: + * Bus ID, Bus Type + */ + mptable_write_buses(mc, NULL, &bus_isa); + + /* + * Type 2: I/O APICs: + * APIC ID, Version, APIC Flags:EN, Address + */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR); + + /* + * Type 3: I/O Interrupt Table Entries: + * Int Type, Int Polarity, Int Level, Source Bus ID, + * Source Bus IRQ, Dest APIC ID, Dest PIN# + */ + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) + + /* APU Internal Graphic Device */ + PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]); + PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]); + + /* SMBUS / ACPI */ + PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]); + + /* Southbridge HD Audio */ + PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]); + + /* LPC */ + PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]); + + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]); + PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]); + PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]); + PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]); + PCI_INT(0x0, 0x16, 0x0, intr_data_ptr[PIRQ_OHCI3]); + PCI_INT(0x0, 0x16, 0x2, intr_data_ptr[PIRQ_EHCI3]); + PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_OHCI4]); + + /* SATA */ + PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]); + + /* on board NIC & Slot PCIE */ + PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); + PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_F]); + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0 */ + PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]); + PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]); + PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]); + PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]); + + /* PCI_SLOT 1 */ + PCI_INT(bus_pci, 0x6, 0x0, intr_data_ptr[PIRQ_F]); + PCI_INT(bus_pci, 0x6, 0x1, intr_data_ptr[PIRQ_G]); + PCI_INT(bus_pci, 0x6, 0x2, intr_data_ptr[PIRQ_H]); + PCI_INT(bus_pci, 0x6, 0x3, intr_data_ptr[PIRQ_E]); + + /* PCI_SLOT 2 */ + PCI_INT(bus_pci, 0x7, 0x0, intr_data_ptr[PIRQ_G]); + PCI_INT(bus_pci, 0x7, 0x1, intr_data_ptr[PIRQ_H]); + PCI_INT(bus_pci, 0x7, 0x2, intr_data_ptr[PIRQ_E]); + PCI_INT(bus_pci, 0x7, 0x3, intr_data_ptr[PIRQ_F]); + + PCI_INT(bus_pci, 0x0, 0x0, intr_data_ptr[PIRQ_C]); + PCI_INT(bus_pci, 0x0, 0x1, intr_data_ptr[PIRQ_D]); + PCI_INT(bus_pci, 0x0, 0x2, intr_data_ptr[PIRQ_E]); + } + + /* PCIe Lan*/ + //PCI_INT(0x0, 0x06, 0x0, intr_data_ptr[PIRQ_D]); + + /* FCH PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_A]); + /* FCH PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_B]); + /* FCH PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_C]); + /* FCH PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_D]); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/am1i-a/romstage.c b/src/mainboard/asus/am1i-a/romstage.c new file mode 100644 index 0000000..baac29a --- /dev/null +++ b/src/mainboard/asus/am1i-a/romstage.c @@ -0,0 +1,173 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2015 Sergej Ivanov <getinaks(a)gmail.com> + * Copyright (C) 2017 Gergely Kiss <mail.gery(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/io.h> +#include <device/pnp_def.h> +#include <console/console.h> +#include <commonlib/loglevel.h> +#include <northbridge/amd/agesa/state_machine.h> +#include <southbridge/amd/common/amd_defs.h> +#include <southbridge/amd/agesa/hudson/hudson.h> +#include <superio/ite/common/ite.h> +#include <superio/ite/it8623e/it8623e.h> + + +#define ITE_CONFIG_REG_CC 0x02 +#define SERIAL_DEV PNP_DEV(0x2e, IT8623E_SP2) +#define GPIO_DEV PNP_DEV(0x2e, IT8623E_GPIO) +#define CLKIN_DEV PNP_DEV(0x2e, IT8623E_GPIO) +#define ENVC_DEV PNP_DEV(0x2e, IT8623E_EC) + +/* Sets up EC configuration as per vendor defaults */ +static void ite_evc_conf(pnp_devfn_t dev) +{ + pnp_set_enable(dev, 0); + ite_reg_write(dev, 0x70 , 0x00 ); + ite_reg_write(dev, 0xf0 , 0x00 ); + ite_reg_write(dev, 0xf1 , 0x00 ); + ite_reg_write(dev, 0xf2 , 0x06 ); + ite_reg_write(dev, 0xf3 , 0x00 ); + ite_reg_write(dev, 0xf4 , 0x00 ); + ite_reg_write(dev, 0xf5 , 0x36 ); + ite_reg_write(dev, 0xf6 , 0x03 ); + ite_reg_write(dev, 0xf9 , 0x48 ); + ite_reg_write(dev, 0xfa , 0x00 ); + ite_reg_write(dev, 0xfb , 0x10 ); + pnp_set_enable(dev, 1); +} + +/* Sets up GPIO configuration as per vendor defaults */ +/* SIO defaults are unknown therefore all GPIO pins are configured */ +static void ite_gpio_conf(pnp_devfn_t dev) +{ + ite_reg_write(dev, 0x23 , 0x08 ); + ite_reg_write(dev, 0x25 , 0x10 ); + ite_reg_write(dev, 0x26 , 0x00 ); + ite_reg_write(dev, 0x27 , 0x80 ); + ite_reg_write(dev, 0x28 , 0x45 ); + ite_reg_write(dev, 0x29 , 0x00 ); + ite_reg_write(dev, 0x2a , 0x00 ); + ite_reg_write(dev, 0x2b , 0x48 ); + ite_reg_write(dev, 0x2c , 0x10 ); + ite_reg_write(dev, 0x2d , 0x80 ); + ite_reg_write(dev, 0x71 , 0x00 ); + ite_reg_write(dev, 0x72 , 0x00 ); + ite_reg_write(dev, 0x73 , 0x38 ); + ite_reg_write(dev, 0x74 , 0x00 ); + ite_reg_write(dev, 0xb0 , 0x00 ); + ite_reg_write(dev, 0xb1 , 0x00 ); + ite_reg_write(dev, 0xb2 , 0x00 ); + ite_reg_write(dev, 0xb3 , 0x00 ); + ite_reg_write(dev, 0xb4 , 0x00 ); + ite_reg_write(dev, 0xb8 , 0x00 ); + ite_reg_write(dev, 0xb9 , 0x00 ); + ite_reg_write(dev, 0xba , 0x00 ); + ite_reg_write(dev, 0xbb , 0x00 ); + ite_reg_write(dev, 0xbc , 0x00 ); + ite_reg_write(dev, 0xbd , 0x00 ); + ite_reg_write(dev, 0xc0 , 0x01 ); + ite_reg_write(dev, 0xc1 , 0x00 ); + ite_reg_write(dev, 0xc2 , 0x00 ); + ite_reg_write(dev, 0xc3 , 0x00 ); + ite_reg_write(dev, 0xc4 , 0x00 ); + ite_reg_write(dev, 0xc8 , 0x01 ); + ite_reg_write(dev, 0xc9 , 0x00 ); + ite_reg_write(dev, 0xca , 0x00 ); + ite_reg_write(dev, 0xcb , 0x00 ); + ite_reg_write(dev, 0xcc , 0x00 ); + ite_reg_write(dev, 0xcd , 0x20 ); + ite_reg_write(dev, 0xce , 0x00 ); + ite_reg_write(dev, 0xcf , 0x00 ); + ite_reg_write(dev, 0xe0 , 0x00 ); + ite_reg_write(dev, 0xe1 , 0x00 ); + ite_reg_write(dev, 0xe2 , 0x00 ); + ite_reg_write(dev, 0xe3 , 0x00 ); + ite_reg_write(dev, 0xe4 , 0x00 ); + ite_reg_write(dev, 0xe9 , 0x21 ); + ite_reg_write(dev, 0xf0 , 0x00 ); + ite_reg_write(dev, 0xf1 , 0x00 ); + ite_reg_write(dev, 0xf2 , 0x00 ); + ite_reg_write(dev, 0xf3 , 0x00 ); + ite_reg_write(dev, 0xf4 , 0x00 ); + ite_reg_write(dev, 0xf5 , 0x00 ); + ite_reg_write(dev, 0xf6 , 0x00 ); + ite_reg_write(dev, 0xf7 , 0x00 ); + ite_reg_write(dev, 0xf8 , 0x00 ); + ite_reg_write(dev, 0xf9 , 0x00 ); + ite_reg_write(dev, 0xfa , 0x00 ); + ite_reg_write(dev, 0xfb , 0x00 ); +} + +void board_BeforeAgesa(struct sysinfo *cb) +{ + int i; + u32 t32, val; + u8 byte; + pci_devfn_t dev; + u32 *addr32; + + /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for + * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA + * even though the register is not documented in the Kabini BKDG. + * Otherwise the serial output is bad code. + */ + outb(0xD2, 0xcd6); + outb(0x00, 0xcd7); + + /* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */ + outb(0xEA, 0xcd6); + outb(0x1, 0xcd7); + + /* Set LPC decode enables. */ + pci_devfn_t dev2 = PCI_DEV(0, 0x14, 3); + pci_write_config32(dev2, 0x44, 0xff03ffd5); + + hudson_lpc_port80(); + + /* Enable the AcpiMmio space */ + outb(0x24, 0xcd6); + outb(0x1, 0xcd7); + + /* Configure ClkDrvStr1 settings */ + addr32 = (u32 *)0xfed80e24; + t32 = *addr32; + t32 = 0x030800aa; + *addr32 = t32; + + /* Configure MiscClkCntl1 settings */ + addr32 = (u32 *)0xfed80e40; + t32 = *addr32; + t32 = 0x000c4050; + *addr32 = t32; + + /* enable SIO LPC decode */ + dev = PCI_DEV(0, 0x14, 3); + byte = pci_read_config8(dev, 0x48); + byte |= 3; /* 2e, 2f & 4e, 4f */ + pci_write_config8(dev, 0x48, byte); + + ite_gpio_conf(GPIO_DEV); + ite_evc_conf(ENVC_DEV); + + ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_48); + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + ite_kill_watchdog(GPIO_DEV); + + /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ + for (i = 0; i < 200000; i++) + val = inb(0xcd6); +} -- To view, visit https://review.coreboot.org/23000 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-MessageType: newchange Gerrit-Change-Id: I325b5ed32275bd7c8c706832323322cbed6f7b92 Gerrit-Change-Number: 23000 Gerrit-PatchSet: 1 Gerrit-Owner: Gergely Kiss <mail.gery(a)gmail.com>

1 0

Change in coreboot[master]: superio/ite/it8623e: add support for SIO chip ITE IT8623E
by build bot (Jenkins) (Code Review) 27 Dec '17

27 Dec '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/22999 ) Change subject: superio/ite/it8623e: add support for SIO chip ITE IT8623E ...................................................................... Patch Set 1: Verified+1 Build Successful https://qa.coreboot.org/job/coreboot-checkpatch/19796/ : SUCCESS https://qa.coreboot.org/job/coreboot-gerrit/65040/ : SUCCESS -- To view, visit https://review.coreboot.org/22999 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-MessageType: comment Gerrit-Change-Id: I50be1db4f238e6218a1d17c3669516fadf0ab4fa Gerrit-Change-Number: 22999 Gerrit-PatchSet: 1 Gerrit-Owner: Gergely Kiss <mail.gery(a)gmail.com> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Comment-Date: Wed, 27 Dec 2017 11:15:37 +0000 Gerrit-HasComments: No Gerrit-HasLabels: Yes

1 0

Change in coreboot[master]: superio/ite/it8623e: add support for SIO chip ITE IT8623E
by Gergely Kiss (Code Review) 27 Dec '17

27 Dec '17

Gergely Kiss has uploaded this change for review. ( https://review.coreboot.org/22999 Change subject: superio/ite/it8623e: add support for SIO chip ITE IT8623E ...................................................................... superio/ite/it8623e: add support for SIO chip ITE IT8623E This change adds basic support for the SuperIO chip ITE IT8623E. Due to the lack of a datasheet, defaults are shown as "not available (NA)" in superiotool's register dump. LDNs defined in it8623e.h are definitely correct and working as expected. Change-Id: I50be1db4f238e6218a1d17c3669516fadf0ab4fa Signed-off-by: Gergely Kiss <mail.gery(a)gmail.com> --- M src/superio/ite/Makefile.inc A src/superio/ite/it8623e/Kconfig A src/superio/ite/it8623e/Makefile.inc A src/superio/ite/it8623e/it8623e.h A src/superio/ite/it8623e/superio.c M util/superiotool/ite.c 6 files changed, 190 insertions(+), 0 deletions(-) git pull ssh://review.coreboot.org:29418/coreboot refs/changes/99/22999/1 diff --git a/src/superio/ite/Makefile.inc b/src/superio/ite/Makefile.inc index f27a333..382dbd7 100644 --- a/src/superio/ite/Makefile.inc +++ b/src/superio/ite/Makefile.inc @@ -19,6 +19,7 @@ ## include generic ite environment controller driver ramstage-$(CONFIG_SUPERIO_ITE_ENV_CTRL) += common/env_ctrl.c +subdirs-y += it8623e subdirs-y += it8671f subdirs-y += it8712f subdirs-y += it8716f diff --git a/src/superio/ite/it8623e/Kconfig b/src/superio/ite/it8623e/Kconfig new file mode 100644 index 0000000..1b4fe4a --- /dev/null +++ b/src/superio/ite/it8623e/Kconfig @@ -0,0 +1,20 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Ronald G. Minnich +## Copyright (C) 2014 Edward O'Callaghan <eocallaghan(a)alterapraxis.com> +## Copyright (C) 2017 Gergely Kiss <mail.gery(a)gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +config SUPERIO_ITE_IT8623E + bool + select SUPERIO_ITE_COMMON_ROMSTAGE diff --git a/src/superio/ite/it8623e/Makefile.inc b/src/superio/ite/it8623e/Makefile.inc new file mode 100644 index 0000000..2afaecf --- /dev/null +++ b/src/superio/ite/it8623e/Makefile.inc @@ -0,0 +1,18 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006 Uwe Hermann <uwe(a)hermann-uwe.de> +## Copyright (C) 2017 Gergely Kiss <mail.gery(a)gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +ramstage-$(CONFIG_SUPERIO_ITE_IT8623E) += superio.c diff --git a/src/superio/ite/it8623e/it8623e.h b/src/superio/ite/it8623e/it8623e.h new file mode 100644 index 0000000..25670c5 --- /dev/null +++ b/src/superio/ite/it8623e/it8623e.h @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 Uwe Hermann <uwe(a)hermann-uwe.de> + * Copyright (C) 2017 Gergely Kiss <mail.gery(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SUPERIO_ITE_IT8623E_H +#define SUPERIO_ITE_IT8623E_H + +/* Datasheet not available. The list of LDNs might not be complete. */ + +#define IT8623E_FDC 0x00 /* Floppy Controller */ +#define IT8623E_SP1 0x01 /* Com1 */ +#define IT8623E_SP2 0x02 /* Com2 */ +#define IT8623E_PP 0x03 /* Parallel port */ +#define IT8623E_EC 0x04 /* Environment controller */ +#define IT8623E_KBCK 0x05 /* PS/2 keyboard */ +#define IT8623E_KBCM 0x06 /* PS/2 mouse */ +#define IT8623E_GPIO 0x07 /* GPIO */ + +#endif /* SUPERIO_ITE_IT8623E_H */ diff --git a/src/superio/ite/it8623e/superio.c b/src/superio/ite/it8623e/superio.c new file mode 100644 index 0000000..b7b5342 --- /dev/null +++ b/src/superio/ite/it8623e/superio.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 Uwe Hermann <uwe(a)hermann-uwe.de> + * Copyright (C) 2007 Philipp Degler <pdegler(a)rumms.uni-mannheim.de> + * Copyright (C) 2016 Gergely Kiss <mail.gery(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/device.h> +#include <device/pnp.h> +#include <pc80/keyboard.h> +#include <arch/io.h> +#include <stdlib.h> +#include <superio/conf_mode.h> + +#include "it8623e.h" + +static void it8623e_init(struct device *dev) +{ + + if (!dev->enabled) + return; + + switch (dev->path.pnp.device) { + case IT8623E_EC: + break; + case IT8623E_KBCK: + set_kbc_ps2_mode(); + pc_keyboard_init(NO_AUX_DEVICE); + break; + case IT8623E_KBCM: + break; + } +} + +static struct device_operations ops = { + .read_resources = pnp_read_resources, + .set_resources = pnp_set_resources, + .enable_resources = pnp_enable_resources, + .enable = pnp_alt_enable, + .init = it8623e_init, + .ops_pnp_mode = &pnp_conf_mode_870155_aa, +}; + +static struct pnp_info pnp_dev_info[] = { + { &ops, IT8623E_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, 0x0ff8, }, + { &ops, IT8623E_SP1, PNP_IO0 | PNP_IRQ0, 0x0ff8, }, + { &ops, IT8623E_SP2, PNP_IO0 | PNP_IRQ0, 0x0ff8, }, + { &ops, IT8623E_PP, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_DRQ0, 0x0ffc, 0x0ffc }, + { &ops, IT8623E_EC, PNP_IO0 | PNP_IO1 | PNP_IRQ0, 0x0ff8, 0x0ff8, }, + { &ops, IT8623E_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, 0x0fff, 0x0fff, }, + { &ops, IT8623E_KBCM, PNP_IRQ0, }, + { &ops, IT8623E_GPIO, PNP_IO0 | PNP_IO1 | PNP_IO2 | PNP_IRQ0, 0x0fff, 0x0ff8, 0x0ff8, }, +}; + +static void enable_dev(struct device *dev) +{ + pnp_enable_devices(dev, &pnp_ops, + ARRAY_SIZE(pnp_dev_info), pnp_dev_info); +} + +struct chip_operations superio_ite_it8623e_ops = { + CHIP_NAME("ITE IT8623E Super I/O") + .enable_dev = enable_dev, +}; diff --git a/util/superiotool/ite.c b/util/superiotool/ite.c index 43ccce1..c556df4 100644 --- a/util/superiotool/ite.c +++ b/util/superiotool/ite.c @@ -272,6 +272,50 @@ {0x30,0x60,0x61,0x62,0x63,0x70,0x71,EOT}, {0x00,0x00,0x6a,0x00,0x6e,0x01,0x01,EOT}}, {EOT}}}, + {0x8623, "IT8623E", { /* Defaults are unknown for this chip as datasheet is not available */ + {NOLDN, NULL, + {0x02,0x07,0x20,0x21,0x22,0x23,0x24,0x2b,0x2e,0x2f,EOT}, + {NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x0, "Floppy", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT}, + {NANA,NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x1, "COM1", + {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT}, + {NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x2, "COM2", + {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT}, + {NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x3, "Parallel port", + {0x30,0x60,0x61,0x62,0x63,0x70,0x74,0xf0,EOT}, + {NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x4, "Environment controller", + {0x30,0x60,0x61,0x62,0x63,0x70,0xf0,0xf1,0xf2, + 0xf3,0xf4,0xf5,0xf6,0xF9,0xFA,0xFB,EOT}, + {NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x5, "Keyboard", + {0x30,0x60,0x61,0x62,0x63,0x70,0x71,0xf0,EOT}, + {NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, + {0x6, "Mouse", + {0x30,0x70,0x71,0xf0,EOT}, + {NANA,NANA,NANA,NANA,EOT}}, + {0x7, "GPIO", + {0x25,0x26,0x27,0x28,0x29,0x2a,0x2c,0x2d,0x60, + 0x61,0x62,0x63,0x64,0x65,0x70,0x71,0x72,0x73, + 0x74,0xb0,0xb1,0xb2,0xb3,0xb4,0xb8,0xb9,0xba, + 0xbb,0xbc,0xbd,0xc0,0xc1,0xc2,0xc3,0xc4,0xc8, + 0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xe0,0xe1, + 0xe2,0xe3,0xe4,0xe9,0xf0,0xf1,0xf2,0xf3,0xf4, + 0xf5,0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,EOT}, + {NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA, + NANA,NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, + {EOT}}}, + {0x8661, "IT8661F/IT8770F", { {NOLDN, NULL, {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x20,0x21,0x22, -- To view, visit https://review.coreboot.org/22999 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-MessageType: newchange Gerrit-Change-Id: I50be1db4f238e6218a1d17c3669516fadf0ab4fa Gerrit-Change-Number: 22999 Gerrit-PatchSet: 1 Gerrit-Owner: Gergely Kiss <mail.gery(a)gmail.com>

1 0

Change in coreboot[master]: drivers/net: Add deivce index for multiple NIC cards
by build bot (Jenkins) (Code Review) 27 Dec '17

27 Dec '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/22984 ) Change subject: drivers/net: Add deivce index for multiple NIC cards ...................................................................... Patch Set 3: Build Successful https://qa.coreboot.org/job/coreboot-gerrit/65039/ : SUCCESS -- To view, visit https://review.coreboot.org/22984 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-MessageType: comment Gerrit-Change-Id: I108b9bfba39370c8906a2fa4d2b39b106e884e0c Gerrit-Change-Number: 22984 Gerrit-PatchSet: 3 Gerrit-Owner: Gaggery Tsai <gaggery.tsai(a)intel.com> Gerrit-Reviewer: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Gaggery Tsai <gaggery.tsai(a)intel.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Comment-Date: Wed, 27 Dec 2017 07:02:51 +0000 Gerrit-HasComments: No Gerrit-HasLabels: No

1 0

Change in coreboot[master]: drivers/net: Add deivce index for multiple NIC cards
by build bot (Jenkins) (Code Review) 27 Dec '17

27 Dec '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/22984 ) Change subject: drivers/net: Add deivce index for multiple NIC cards ...................................................................... Patch Set 2: Verified+1 Build Successful https://qa.coreboot.org/job/coreboot-checkpatch/19795/ : SUCCESS https://qa.coreboot.org/job/coreboot-gerrit/65038/ : SUCCESS -- To view, visit https://review.coreboot.org/22984 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-MessageType: comment Gerrit-Change-Id: I108b9bfba39370c8906a2fa4d2b39b106e884e0c Gerrit-Change-Number: 22984 Gerrit-PatchSet: 2 Gerrit-Owner: Gaggery Tsai <gaggery.tsai(a)intel.com> Gerrit-Reviewer: Furquan Shaikh <furquan(a)google.com> Gerrit-Reviewer: Gaggery Tsai <gaggery.tsai(a)intel.com> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Comment-Date: Wed, 27 Dec 2017 04:06:55 +0000 Gerrit-HasComments: No Gerrit-HasLabels: Yes

1 0

Change in coreboot[master]: nb/intel/x4x: Disable watchdog, halt TCO timer and clear timeout
by build bot (Jenkins) (Code Review) 27 Dec '17

27 Dec '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/22997 ) Change subject: nb/intel/x4x: Disable watchdog, halt TCO timer and clear timeout ...................................................................... Patch Set 2: Verified+1 Build Successful https://qa.coreboot.org/job/coreboot-checkpatch/19792/ : SUCCESS https://qa.coreboot.org/job/coreboot-gerrit/65035/ : SUCCESS -- To view, visit https://review.coreboot.org/22997 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-MessageType: comment Gerrit-Change-Id: Icfd3789312704f61000a417f23a121d02d2e7fbe Gerrit-Change-Number: 22997 Gerrit-PatchSet: 2 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Comment-Date: Wed, 27 Dec 2017 00:13:08 +0000 Gerrit-HasComments: No Gerrit-HasLabels: Yes

1 0

Change in coreboot[master]: nb/intel/x4x: Limit DDR3 speed to 400MHz
by build bot (Jenkins) (Code Review) 27 Dec '17

27 Dec '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/22998 ) Change subject: nb/intel/x4x: Limit DDR3 speed to 400MHz ...................................................................... Patch Set 2: Verified+1 Build Successful https://qa.coreboot.org/job/coreboot-checkpatch/19793/ : SUCCESS https://qa.coreboot.org/job/coreboot-gerrit/65036/ : SUCCESS -- To view, visit https://review.coreboot.org/22998 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-MessageType: comment Gerrit-Change-Id: I11f663a50a42c70ed63ba045bd89fcd96cd047ce Gerrit-Change-Number: 22998 Gerrit-PatchSet: 2 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Comment-Date: Wed, 27 Dec 2017 00:12:29 +0000 Gerrit-HasComments: No Gerrit-HasLabels: Yes

1 0

Change in coreboot[master]: mb/intel/dg41wv: Add mainboard
by build bot (Jenkins) (Code Review) 27 Dec '17

27 Dec '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/20003 ) Change subject: mb/intel/dg41wv: Add mainboard ...................................................................... Patch Set 7: Verified-1 Build Failed https://qa.coreboot.org/job/coreboot-gerrit/65037/ : FAILURE https://qa.coreboot.org/job/coreboot-checkpatch/19794/ : SUCCESS -- To view, visit https://review.coreboot.org/20003 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-MessageType: comment Gerrit-Change-Id: If01bf658e52d273c3c203d362f21c3cb9c623f40 Gerrit-Change-Number: 20003 Gerrit-PatchSet: 7 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: Paul Menzel <paulepanter(a)users.sourceforge.net> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Comment-Date: Wed, 27 Dec 2017 00:09:39 +0000 Gerrit-HasComments: No Gerrit-HasLabels: Yes

1 0

Change in coreboot[master]: nb/intel/x4x/raminit: Support programming initials DD3 DLL setting
by build bot (Jenkins) (Code Review) 27 Dec '17

27 Dec '17

build bot (Jenkins) has posted comments on this change. ( https://review.coreboot.org/22993 ) Change subject: nb/intel/x4x/raminit: Support programming initials DD3 DLL setting ...................................................................... Patch Set 1: Verified+1 Build Successful https://qa.coreboot.org/job/coreboot-checkpatch/19788/ : SUCCESS https://qa.coreboot.org/job/coreboot-gerrit/65031/ : SUCCESS -- To view, visit https://review.coreboot.org/22993 To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings Gerrit-Project: coreboot Gerrit-Branch: master Gerrit-MessageType: comment Gerrit-Change-Id: I67e48b4ae6f2076399133ba7b98ab1dfc0e0ab08 Gerrit-Change-Number: 22993 Gerrit-PatchSet: 1 Gerrit-Owner: Arthur Heymans <arthur(a)aheymans.xyz> Gerrit-Reviewer: build bot (Jenkins) <no-reply(a)coreboot.org> Gerrit-Comment-Date: Wed, 27 Dec 2017 00:09:28 +0000 Gerrit-HasComments: No Gerrit-HasLabels: Yes

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit December 2017