coreboot-gerrit November 2015

coreboot-gerrit@coreboot.org

1 participants
1544 discussions

Patch set updated for coreboot: NOTFORMERGE: Final hack for Pineview board to boot
by Damien Zammit 14 Nov '15

14 Nov '15

Damien Zammit (damien(a)zamaudio.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12432 -gerrit commit 024f6d3bab20fd29f91bb2e58cb7a1e2be7cdf6a Author: Damien Zammit <damien(a)zamaudio.com> Date: Sat Nov 14 01:05:21 2015 +1100 NOTFORMERGE: Final hack for Pineview board to boot This needs to be cleaned up so that a working patch can be submitted. However I am providing this dirty hack here to complete the Intel D510MO board port. It modifies the cpu bits and CAR includes for an Atom CPU, but clearly cannot be merged as is. Change-Id: I088ba51498047027ee172dfc6628fcd00624f110 Signed-off-by: Damien Zammit <damien(a)zamaudio.com> --- src/cpu/intel/model_106cx/Kconfig | 2 +- src/cpu/intel/model_106cx/Makefile.inc | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/cpu/intel/model_106cx/Kconfig b/src/cpu/intel/model_106cx/Kconfig index 09acfd9..a311dc2 100644 --- a/src/cpu/intel/model_106cx/Kconfig +++ b/src/cpu/intel/model_106cx/Kconfig @@ -16,6 +16,6 @@ if CPU_INTEL_MODEL_106CX config CPU_ADDR_BITS int - default 32 + default 36 endif diff --git a/src/cpu/intel/model_106cx/Makefile.inc b/src/cpu/intel/model_106cx/Makefile.inc index 25631e5..c3742b1 100644 --- a/src/cpu/intel/model_106cx/Makefile.inc +++ b/src/cpu/intel/model_106cx/Makefile.inc @@ -1,5 +1,5 @@ ramstage-y += model_106cx_init.c subdirs-y += ../../x86/name -cpu_incs-y += $(src)/cpu/intel/car/cache_as_ram_ht.inc +cpu_incs-y += $(src)/cpu/intel/model_6ex/cache_as_ram.inc cpu_microcode_bins += 3rdparty/blobs/cpu/intel/model_106cx/microcode.bin

1 0

Patch set updated for coreboot: Add southbridge NM10
by Damien Zammit 14 Nov '15

14 Nov '15

Damien Zammit (damien(a)zamaudio.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12431 -gerrit commit a29bbfa825d4dd8b4a224fa3338809a7090f014f Author: Damien Zammit <damien(a)zamaudio.com> Date: Sat Nov 14 01:03:39 2015 +1100 Add southbridge NM10 (It is an ICH7 with a different name) Change-Id: Ib8c76c001dffee8f93e3d6aa3156d4413b2e842a Signed-off-by: Damien Zammit <damien(a)zamaudio.com> --- src/southbridge/intel/i82801gx/lpc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/src/southbridge/intel/i82801gx/lpc.c b/src/southbridge/intel/i82801gx/lpc.c index 57ff0dd..d331fa8 100644 --- a/src/southbridge/intel/i82801gx/lpc.c +++ b/src/southbridge/intel/i82801gx/lpc.c @@ -718,6 +718,13 @@ static const struct pci_driver ich7m_ich7u_lpc __pci_driver = { .device = 0x27b9, }; +/* 82NM10 (NM10) */ +static const struct pci_driver nm10_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x27bc, +}; + /* 82801GHM (ICH7-M DH) */ static const struct pci_driver ich7m_dh_lpc __pci_driver = { .ops = &device_ops,

1 0

Patch set updated for coreboot: northbridge/intel/pineview: Native RAM init
by Damien Zammit 14 Nov '15

14 Nov '15

Damien Zammit (damien(a)zamaudio.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12430 -gerrit commit fca998421ee8e773dc6093f9d2bcf933cf374b8b Author: Damien Zammit <damien(a)zamaudio.com> Date: Sat Nov 14 00:59:21 2015 +1100 northbridge/intel/pineview: Native RAM init Does native ram init for Intel Atom D5xx 8086:a000 northbridge Tested on Intel D510MO mainboard (boots to linux) Needs cpu and lpc patch (to follow) Change-Id: I3fb8146ef7fe2ad27c167ecd2fb0fd629f051cc1 Signed-off-by: Damien Zammit <damien(a)zamaudio.com> --- src/northbridge/intel/pineview/Kconfig | 6 +- src/northbridge/intel/pineview/Makefile.inc | 10 +- src/northbridge/intel/pineview/acpi.c | 29 +- src/northbridge/intel/pineview/acpi/hostbridge.asl | 234 ++ src/northbridge/intel/pineview/acpi/igd.asl | 437 +++ src/northbridge/intel/pineview/acpi/peg.asl | 46 + src/northbridge/intel/pineview/acpi/pineview.asl | 83 + src/northbridge/intel/pineview/bootblock.c | 3 +- src/northbridge/intel/pineview/chip.h | 8 + src/northbridge/intel/pineview/early_init.c | 193 ++ src/northbridge/intel/pineview/gma.c | 552 ++++ src/northbridge/intel/pineview/northbridge.c | 302 +++ src/northbridge/intel/pineview/pineview.h | 177 +- src/northbridge/intel/pineview/ram_calc.c | 69 +- src/northbridge/intel/pineview/raminit.c | 2841 ++++++++++++++++++++ src/northbridge/intel/pineview/raminit.h | 27 + 16 files changed, 4969 insertions(+), 48 deletions(-) diff --git a/src/northbridge/intel/pineview/Kconfig b/src/northbridge/intel/pineview/Kconfig index 4d6dcc2..9b3459a 100644 --- a/src/northbridge/intel/pineview/Kconfig +++ b/src/northbridge/intel/pineview/Kconfig @@ -26,10 +26,12 @@ config NORTHBRIDGE_SPECIFIC_OPTIONS # dummy def_bool y select MMCONF_SUPPORT select MMCONF_SUPPORT_DEFAULT - #select HAVE_DEBUG_RAM_SETUP + select HAVE_DEBUG_RAM_SETUP select LAPIC_MONOTONIC_TIMER select VGA - select PER_DEVICE_ACPI_TABLES + #select PER_DEVICE_ACPI_TABLES + select INTEL_GMA_ACPI + select LATE_CBMEM_INIT config BOOTBLOCK_NORTHBRIDGE_INIT string diff --git a/src/northbridge/intel/pineview/Makefile.inc b/src/northbridge/intel/pineview/Makefile.inc index 8416342..56be894 100644 --- a/src/northbridge/intel/pineview/Makefile.inc +++ b/src/northbridge/intel/pineview/Makefile.inc @@ -20,15 +20,13 @@ ifeq ($(CONFIG_NORTHBRIDGE_INTEL_PINEVIEW),y) ramstage-y += ram_calc.c -#ramstage-y += northbridge.c -#ramstage-y += gma.c +ramstage-y += northbridge.c ramstage-y += acpi.c +ramstage-y += gma.c romstage-y += ram_calc.c -#romstage-y += raminit.c -#romstage-y += early_init.c -#romstage-y += errata.c -#romstage-y += debug.c +romstage-y += raminit.c +romstage-y += early_init.c smm-y += udelay.c diff --git a/src/northbridge/intel/pineview/acpi.c b/src/northbridge/intel/pineview/acpi.c index b393170..0d69008 100644 --- a/src/northbridge/intel/pineview/acpi.c +++ b/src/northbridge/intel/pineview/acpi.c @@ -19,17 +19,18 @@ * MA 02110-1301 USA */ -#include <arch/acpigen.h> -#include <arch/acpi.h> -#include <cbmem.h> +#include <types.h> +#include <string.h> #include <console/console.h> -#include <cpu/cpu.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> #include <device/device.h> #include <device/pci.h> #include <device/pci_ids.h> -#include <northbridge/intel/pineview/pineview.h> -#include <string.h> -#include <types.h> +#include <cbmem.h> +#include <arch/acpigen.h> +#include <cpu/cpu.h> +#include "pineview.h" unsigned long acpi_fill_mcfg(unsigned long current) { @@ -73,3 +74,17 @@ unsigned long acpi_fill_mcfg(unsigned long current) return current; } + +#define ALIGN_CURRENT current = (ALIGN(current, 16)) +unsigned long northbridge_write_acpi_tables(unsigned long start, struct acpi_rsdp *rsdp) +{ + unsigned long current; + + current = start; + + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "current = %lx\n", current); + + return current; +} diff --git a/src/northbridge/intel/pineview/acpi/hostbridge.asl b/src/northbridge/intel/pineview/acpi/hostbridge.asl new file mode 100644 index 0000000..747d7da --- /dev/null +++ b/src/northbridge/intel/pineview/acpi/hostbridge.asl @@ -0,0 +1,234 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/ioapic.h> + +Name(_HID,EISAID("PNP0A08")) // PCIe +Name(_CID,EISAID("PNP0A03")) // PCI + +Name(_ADR, 0) +Name(_BBN, 0) + +Device (MCHC) +{ + Name(_ADR, 0x00000000) // 0:0.0 + + OperationRegion(MCHP, PCI_Config, 0x00, 0x100) + Field (MCHP, DWordAcc, NoLock, Preserve) + { + Offset (0x40), // EPBAR + EPEN, 1, // Enable + , 11, // + EPBR, 24, // EPBAR + + Offset (0x48), // MCHBAR + MHEN, 1, // Enable + , 13, // + MHBR, 22, // MCHBAR + + Offset (0x60), // PCIe BAR + PXEN, 1, // Enable + PXSZ, 2, // BAR size + , 23, // + PXBR, 10, // PCIe BAR + + Offset (0x68), // DMIBAR + DMEN, 1, // Enable + , 11, // + DMBR, 20, // DMIBAR + + // ... + + Offset (0x90), // PAM0 + , 4, + PM0H, 2, + , 2, + Offset (0x91), // PAM1 + PM1L, 2, + , 2, + PM1H, 2, + , 2, + Offset (0x92), // PAM2 + PM2L, 2, + , 2, + PM2H, 2, + , 2, + Offset (0x93), // PAM3 + PM3L, 2, + , 2, + PM3H, 2, + , 2, + Offset (0x94), // PAM4 + PM4L, 2, + , 2, + PM4H, 2, + , 2, + Offset (0x95), // PAM5 + PM5L, 2, + , 2, + PM5H, 2, + , 2, + Offset (0x96), // PAM6 + PM6L, 2, + , 2, + PM6H, 2, + , 2, + + Offset (0xa0), // Top of Used Memory + TOM, 8, + + Offset (0xb0), // Top of Low Used Memory + , 4, + TLUD, 12, + + } + +} + + +// Current Resource Settings +Name (MCRS, ResourceTemplate() +{ + // Bus Numbers + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, 0x0000, 0x00ff, 0x0000, 0x0100,,, PB00) + + // IO Region 0 + DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, 0x0000, 0x0cf7, 0x0000, 0x0cf8,,, PI00) + + // PCI Config Space + Io (Decode16, 0x0cf8, 0x0cf8, 0x0001, 0x0008) + + // IO Region 1 + DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, 0x0d00, 0xffff, 0x0000, 0xf300,,, PI01) + + // VGA memory (0xa0000-0xbffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000a0000, 0x000bffff, 0x00000000, + 0x00020000,,, ASEG) + + // OPROM reserved (0xc0000-0xc3fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000c0000, 0x000c3fff, 0x00000000, + 0x00004000,,, OPR0) + + // OPROM reserved (0xc4000-0xc7fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000c4000, 0x000c7fff, 0x00000000, + 0x00004000,,, OPR1) + + // OPROM reserved (0xc8000-0xcbfff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000c8000, 0x000cbfff, 0x00000000, + 0x00004000,,, OPR2) + + // OPROM reserved (0xcc000-0xcffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000cc000, 0x000cffff, 0x00000000, + 0x00004000,,, OPR3) + + // OPROM reserved (0xd0000-0xd3fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000d0000, 0x000d3fff, 0x00000000, + 0x00004000,,, OPR4) + + // OPROM reserved (0xd4000-0xd7fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000d4000, 0x000d7fff, 0x00000000, + 0x00004000,,, OPR5) + + // OPROM reserved (0xd8000-0xdbfff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000d8000, 0x000dbfff, 0x00000000, + 0x00004000,,, OPR6) + + // OPROM reserved (0xdc000-0xdffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000dc000, 0x000dffff, 0x00000000, + 0x00004000,,, OPR7) + + // BIOS Extension (0xe0000-0xe3fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000e0000, 0x000e3fff, 0x00000000, + 0x00004000,,, ESG0) + + // BIOS Extension (0xe4000-0xe7fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000e4000, 0x000e7fff, 0x00000000, + 0x00004000,,, ESG1) + + // BIOS Extension (0xe8000-0xebfff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000e8000, 0x000ebfff, 0x00000000, + 0x00004000,,, ESG2) + + // BIOS Extension (0xec000-0xeffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000ec000, 0x000effff, 0x00000000, + 0x00004000,,, ESG3) + + // System BIOS (0xf0000-0xfffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000f0000, 0x000fffff, 0x00000000, + 0x00010000,,, FSEG) + + // PCI Memory Region (Top of memory-0xfebfffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x00000000, 0xfebfffff, 0x00000000, + IO_APIC_ADDR,,, PM01) + + // TPM Area (0xfed40000-0xfed44fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0xfed40000, 0xfed44fff, 0x00000000, + 0x00005000,,, TPMR) +}) + +Method (_CRS, 0, Serialized) +{ + // Find PCI resource area in MCRS + CreateDwordField(MCRS, ^PM01._MIN, PMIN) + CreateDwordField(MCRS, ^PM01._MAX, PMAX) + CreateDwordField(MCRS, ^PM01._LEN, PLEN) + + // Fix up PCI memory region: + // Enter actual TOLUD. The TOLUD register contains bits 27-31 of + // the top of memory address. + ShiftLeft (^MCHC.TLUD, 27, PMIN) + Add(Subtract(PMAX, PMIN), 1, PLEN) + + Return (MCRS) +} + +/* IRQ assignment is mainboard specific. Get it from mainboard ACPI code */ +#include "acpi/pineview_pci_irqs.asl" diff --git a/src/northbridge/intel/pineview/acpi/igd.asl b/src/northbridge/intel/pineview/acpi/igd.asl new file mode 100644 index 0000000..199765b --- /dev/null +++ b/src/northbridge/intel/pineview/acpi/igd.asl @@ -0,0 +1,437 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (GFX0) +{ + Name (_ADR, 0x00020000) + + OperationRegion (GFXC, PCI_Config, 0x00, 0x0100) + Field (GFXC, DWordAcc, NoLock, Preserve) + { + Offset (0x10), + BAR0, 64 + } + + OperationRegion (GFRG, SystemMemory, And (BAR0, 0xfffffffffffffff0), 0x400000) + Field (GFRG, DWordAcc, NoLock, Preserve) + { + Offset (0x61250), + CR1, 32, + BCLV, 16, + BCLM, 16, + } + + /* Display Output Switching */ + Method (_DOS, 1) + { + /* Windows 2000 and Windows XP call _DOS to enable/disable + * Display Output Switching during init and while a switch + * is already active + */ + Store (And(Arg0, 7), DSEN) + } + + /* We try to support as many GM45 systems as possible, + * so keep the number of DIDs flexible. + */ + Method (_DOD, 0) + { + If (LEqual(NDID, 1)) { + Name(DOD1, Package() { + 0xffffffff + }) + Store (Or(0x00010000, DID1), Index(DOD1, 0)) + Return(DOD1) + } + + If (LEqual(NDID, 2)) { + Name(DOD2, Package() { + 0xffffffff, + 0xffffffff + }) + Store (Or(0x00010000, DID1), Index(DOD2, 0)) + Store (Or(0x00010000, DID2), Index(DOD2, 1)) + Return(DOD2) + } + + If (LEqual(NDID, 3)) { + Name(DOD3, Package() { + 0xffffffff, + 0xffffffff, + 0xffffffff + }) + Store (Or(0x00010000, DID1), Index(DOD3, 0)) + Store (Or(0x00010000, DID2), Index(DOD3, 1)) + Store (Or(0x00010000, DID3), Index(DOD3, 2)) + Return(DOD3) + } + + If (LEqual(NDID, 4)) { + Name(DOD4, Package() { + 0xffffffff, + 0xffffffff, + 0xffffffff, + 0xffffffff + }) + Store (Or(0x00010000, DID1), Index(DOD4, 0)) + Store (Or(0x00010000, DID2), Index(DOD4, 1)) + Store (Or(0x00010000, DID3), Index(DOD4, 2)) + Store (Or(0x00010000, DID4), Index(DOD4, 3)) + Return(DOD4) + } + + If (LGreater(NDID, 4)) { + Name(DOD5, Package() { + 0xffffffff, + 0xffffffff, + 0xffffffff, + 0xffffffff, + 0xffffffff + }) + Store (Or(0x00010000, DID1), Index(DOD5, 0)) + Store (Or(0x00010000, DID2), Index(DOD5, 1)) + Store (Or(0x00010000, DID3), Index(DOD5, 2)) + Store (Or(0x00010000, DID4), Index(DOD5, 3)) + Store (Or(0x00010000, DID5), Index(DOD5, 4)) + Return(DOD5) + } + + /* Some error happened, but we have to return something */ + Return (Package() {0x00000400}) + } + + Device(DD01) + { + /* Device Unique ID */ + Method(_ADR, 0, Serialized) + { + If(LEqual(DID1, 0)) { + Return (1) + } Else { + Return (And(0xffff, DID1)) + } + } + + /* Device Current Status */ + Method(_DCS, 0) + { + TRAP(1) + If (And(CSTE, 1)) { + Return (0x1f) + } + Return(0x1d) + } + + /* Query Device Graphics State */ + Method(_DGS, 0) + { + If (And(NSTE, 1)) { + Return(1) + } + Return(0) + } + + /* Device Set State */ + Method(_DSS, 1) + { + /* If Parameter Arg0 is (1 << 31) | (1 << 30), the + * display switch was completed + */ + If (LEqual(And(Arg0, 0xc0000000), 0xc0000000)) { + Store (NSTE, CSTE) + } + } + } + +#ifdef DISPLAY_DEVICE_2_IS_LCD_SCREEN + Device (LCD0) + { + /* Device Unique ID */ + Method(_ADR, 0, Serialized) + { + If(LEqual(DID2, 0)) { + Return (2) + } Else { + Return (And(0xffff, DID2)) + } + } + + Name (BRCT, 0) + + Name (BRIG, Package (0x12) + { + 0x61, + 0x61, + 0x2, + 0x4, + 0x5, + 0x7, + 0x9, + 0xb, + 0xd, + 0x11, + 0x14, + 0x17, + 0x1c, + 0x20, + 0x27, + 0x31, + 0x41, + 0x61, + }) + + Method (_BCL, 0, NotSerialized) + { + Store (1, BRCT) + Return (BRIG) + } + + Method (_BCM, 1, NotSerialized) + { + Store (ShiftLeft (Arg0, 4), ^^BCLV) + Store (0x80000000, ^^CR1) + Store (0x0610, ^^BCLM) + } + Method (_BQC, 0, NotSerialized) + { + Store (^^BCLV, Local0) + ShiftRight (Local0, 4, Local0) + Return (Local0) + } + + Method(BRID, 1, NotSerialized) + { + Store (Match (BRIG, MEQ, Arg0, MTR, Zero, 2), Local0) + If (LEqual (Local0, Ones)) + { + Return (0x11) + } + Return (Local0) + } + + /* Using Notify is the right way. But Windows doesn't handle + it well. So use both method in a way to avoid double action. + */ + Method (DECB, 0, NotSerialized) + { + If (BRCT) + { + Notify (LCD0, 0x87) + } Else { + Store (BRID (_BQC ()), Local0) + If (LNotEqual (Local0, 2)) + { + Decrement (Local0) + } + _BCM (DerefOf (Index (BRIG, Local0))) + } + } + Method (INCB, 0, NotSerialized) + { + If (BRCT) + { + Notify (LCD0, 0x86) + } Else { + Store (BRID (_BQC ()), Local0) + If (LNotEqual (Local0, 0x11)) + { + Increment (Local0) + } + _BCM (DerefOf (Index (BRIG, Local0))) + } + } + } +#else + Device(DD02) + { + /* Device Unique ID */ + Method(_ADR, 0, Serialized) + { + If(LEqual(DID2, 0)) { + Return (2) + } Else { + Return (And(0xffff, DID2)) + } + } + + /* Device Current Status */ + Method(_DCS, 0) + { + TRAP(1) + If (And(CSTE, 2)) { + Return (0x1f) + } + Return(0x1d) + } + + /* Query Device Graphics State */ + Method(_DGS, 0) + { + If (And(NSTE, 2)) { + Return(1) + } + Return(0) + } + + /* Device Set State */ + Method(_DSS, 1) + { + /* If Parameter Arg0 is (1 << 31) | (1 << 30), the + * display switch was completed + */ + If (LEqual(And(Arg0, 0xc0000000), 0xc0000000)) { + Store (NSTE, CSTE) + } + } + } +#endif + + Device(DD03) + { + /* Device Unique ID */ + Method(_ADR, 0, Serialized) + { + If(LEqual(DID3, 0)) { + Return (3) + } Else { + Return (And(0xffff, DID3)) + } + } + + /* Device Current Status */ + Method(_DCS, 0) + { + TRAP(1) + If (And(CSTE, 4)) { + Return (0x1f) + } + Return(0x1d) + } + + /* Query Device Graphics State */ + Method(_DGS, 0) + { + If (And(NSTE, 4)) { + Return(1) + } + Return(0) + } + + /* Device Set State */ + Method(_DSS, 1) + { + /* If Parameter Arg0 is (1 << 31) | (1 << 30), the + * display switch was completed + */ + If (LEqual(And(Arg0, 0xc0000000), 0xc0000000)) { + Store (NSTE, CSTE) + } + } + } + + + Device(DD04) + { + /* Device Unique ID */ + Method(_ADR, 0, Serialized) + { + If(LEqual(DID4, 0)) { + Return (4) + } Else { + Return (And(0xffff, DID4)) + } + } + + /* Device Current Status */ + Method(_DCS, 0) + { + TRAP(1) + If (And(CSTE, 8)) { + Return (0x1f) + } + Return(0x1d) + } + + /* Query Device Graphics State */ + Method(_DGS, 0) + { + If (And(NSTE, 4)) { + Return(1) + } + Return(0) + } + + /* Device Set State */ + Method(_DSS, 1) + { + /* If Parameter Arg0 is (1 << 31) | (1 << 30), the + * display switch was completed + */ + If (LEqual(And(Arg0, 0xc0000000), 0xc0000000)) { + Store (NSTE, CSTE) + } + } + } + + + Device(DD05) + { + /* Device Unique ID */ + Method(_ADR, 0, Serialized) + { + If(LEqual(DID5, 0)) { + Return (5) + } Else { + Return (And(0xffff, DID5)) + } + } + + /* Device Current Status */ + Method(_DCS, 0) + { + TRAP(1) + If (And(CSTE, 16)) { + Return (0x1f) + } + Return(0x1d) + } + + /* Query Device Graphics State */ + Method(_DGS, 0) + { + If (And(NSTE, 4)) { + Return(1) + } + Return(0) + } + + /* Device Set State */ + Method(_DSS, 1) + { + /* If Parameter Arg0 is (1 << 31) | (1 << 30), the + * display switch was completed + */ + If (LEqual(And(Arg0, 0xc0000000), 0xc0000000)) { + Store (NSTE, CSTE) + } + } + } +} diff --git a/src/northbridge/intel/pineview/acpi/peg.asl b/src/northbridge/intel/pineview/acpi/peg.asl new file mode 100644 index 0000000..36892cb --- /dev/null +++ b/src/northbridge/intel/pineview/acpi/peg.asl @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (PEGP) +{ + Name (_ADR, 0x00010000) + + // PCI Interrupt Routing. + Method (_PRT) + { + If (PICM) { + Return (Package() { + Package() { 0x0000ffff, 0, 0, 16 }, + Package() { 0x0000ffff, 1, 0, 17 }, + Package() { 0x0000ffff, 2, 0, 18 }, + Package() { 0x0000ffff, 3, 0, 19 } + }) + } Else { + Return (Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 } + }) + } + + } +} diff --git a/src/northbridge/intel/pineview/acpi/pineview.asl b/src/northbridge/intel/pineview/acpi/pineview.asl new file mode 100644 index 0000000..46f3a0d --- /dev/null +++ b/src/northbridge/intel/pineview/acpi/pineview.asl @@ -0,0 +1,83 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "hostbridge.asl" +#include "../pineview.h" + +/* PCI Device Resource Consumption */ +Device (PDRC) +{ + Name (_HID, EISAID("PNP0C02")) + Name (_UID, 1) + + // This does not seem to work correctly yet - set values statically for + // now. + + //Name (PDRS, ResourceTemplate() { + // Memory32Fixed(ReadWrite, 0x00000000, 0x00004000, RCRB) // RCBA + // Memory32Fixed(ReadWrite, 0x00000000, 0x00004000, MCHB) // MCHBAR + // Memory32Fixed(ReadWrite, 0x00000000, 0x00001000, DMIB) // DMIBAR + // Memory32Fixed(ReadWrite, 0x00000000, 0x00001000, EGPB) // EPBAR + // Memory32Fixed(ReadWrite, 0x00000000, 0x00000000, PCIE) // PCIE BAR + // Memory32Fixed(ReadWrite, 0xfed20000, 0x00070000, ICHB) // Misc ICH + //}) + + Name (PDRS, ResourceTemplate() { + Memory32Fixed(ReadWrite, 0xfed1c000, 0x00004000) // RCBA + Memory32Fixed(ReadWrite, DEFAULT_MCHBAR, 0x00004000) + Memory32Fixed(ReadWrite, DEFAULT_DMIBAR, 0x00001000) + Memory32Fixed(ReadWrite, DEFAULT_EPBAR, 0x00001000) + Memory32Fixed(ReadWrite, DEFAULT_PCIEXBAR, 0x04000000) + Memory32Fixed(ReadWrite, 0xfed20000, 0x00020000) // Misc ICH + Memory32Fixed(ReadWrite, 0xfed40000, 0x00005000) // Misc ICH + Memory32Fixed(ReadWrite, 0xfed45000, 0x0004b000) // Misc ICH + }) + + // Current Resource Settings + Method (_CRS, 0, Serialized) + { + //CreateDwordField(PDRS, ^RCRB._BAS, RBR0) + //ShiftLeft(\_SB.PCI0.LPCB.RCBA, 14, RBR0) + + //CreateDwordField(PDRS, ^MCHB._BAS, MBR0) + //ShiftLeft(\_SB.PCI0.MCHC.MHBR, 14, MBR0) + + //CreateDwordField(PDRS, ^DMIB._BAS, DBR0) + //ShiftLeft(\_SB.PCI0.MCHC.DMBR, 12, DBR0) + + //CreateDwordField(PDRS, ^EGPB._BAS, EBR0) + //ShiftLeft(\_SB.PCI0.MCHC.EPBR, 12, EBR0) + + //CreateDwordField(PDRS, ^PCIE._BAS, PBR0) + //ShiftLeft(\_SB.PCI0.MCHC.PXBR, 26, PBR0) + + //CreateDwordField(PDRS, ^PCIE._LEN, PSZ0) + //ShiftLeft(0x10000000, \_SB.PCI0.MCHC.PXSZ, PSZ0) + + Return(PDRS) + } +} + +// PCIe graphics port 0:1.0 +#include "peg.asl" + +// Integrated graphics 0:2.0 +//#include "igd.asl" diff --git a/src/northbridge/intel/pineview/bootblock.c b/src/northbridge/intel/pineview/bootblock.c index 985eddd..a091b27 100644 --- a/src/northbridge/intel/pineview/bootblock.c +++ b/src/northbridge/intel/pineview/bootblock.c @@ -1,5 +1,4 @@ #include <arch/io.h> -#include <northbridge/intel/pineview/pineview.h> static void bootblock_northbridge_init(void) { @@ -18,5 +17,5 @@ static void bootblock_northbridge_init(void) * 4GiB. */ reg = CONFIG_MMCONF_BASE_ADDRESS | 4 | 1; /* 64MiB - 0-63 buses. */ - pci_io_write_config32(PCI_DEV(0,0,0), PCIEXBAR, reg); + pci_io_write_config32(PCI_DEV(0,0,0), 0x60, reg); } diff --git a/src/northbridge/intel/pineview/chip.h b/src/northbridge/intel/pineview/chip.h new file mode 100644 index 0000000..a620857 --- /dev/null +++ b/src/northbridge/intel/pineview/chip.h @@ -0,0 +1,8 @@ +#include <drivers/intel/gma/i915.h> + +struct northbridge_intel_pineview_config { + u32 gpu_hotplug; + u32 gpu_backlight; + int gpu_lvds_use_spread_spectrum_clock; + struct i915_gpu_controller_info gfx; +}; diff --git a/src/northbridge/intel/pineview/early_init.c b/src/northbridge/intel/pineview/early_init.c new file mode 100644 index 0000000..f241518 --- /dev/null +++ b/src/northbridge/intel/pineview/early_init.c @@ -0,0 +1,193 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Damien Zammit <damien(a)zamaudio.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <console/console.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <cbmem.h> +#include <halt.h> +#include <string.h> +#include <northbridge/intel/pineview/pineview.h> + +static void pineview_setup_bars(void) +{ + u8 reg8; + u16 reg16; + u32 reg32; + + /* Setting up Southbridge. In the northbridge code. */ + printk(BIOS_DEBUG, "Setting up static southbridge registers..."); + pci_write_config32(PCI_DEV(0, 0x1f, 0), RCBA, (uintptr_t)DEFAULT_RCBA | 1); + + pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE, DEFAULT_PMBASE | 1); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x44 /* ACPI_CNTL */ , 0x80); /* Enable ACPI BAR */ + + pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */ , 0x10); /* Enable GPIOs */ + + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x007c0291); + + pci_write_config32(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); + printk(BIOS_DEBUG, " done.\n"); + + printk(BIOS_DEBUG, "Disabling Watchdog reboot..."); + RCBA32(GCS) = RCBA32(GCS) | (1 << 5); /* No reset */ + outw((1 << 11), DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */ + printk(BIOS_DEBUG, " done.\n"); + + /* Enable upper 128bytes of CMOS */ + RCBA32(0x3400) = (1 << 2); + + /* Set up GPIO initially */ + GPIO32(0x0) = 0x1ffde7c1; + GPIO32(0x30) = 0x7f; + GPIO32(0x4) = 0xe9e001; + GPIO32(0x34) = 0x7e; + GPIO32(0xc) = 0x4000000; + GPIO32(0x2c) = 0x2000; + GPIO32(0x18) = 0x0; + GPIO32(0xc) = 0xece9e802; + + printk(BIOS_DEBUG, "Setting up static northbridge registers..."); + /* Set up all hardcoded northbridge BARs */ + pci_write_config8(PCI_DEV(0, 0x00, 0), 0x8, 0x69); + + pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR, DEFAULT_EPBAR | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR, (uintptr_t)DEFAULT_MCHBAR | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR, (uintptr_t)DEFAULT_DMIBAR | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), PMIOBAR, (uintptr_t)0x400 | 1); + + + reg32 = MCHBAR32(0x30); + MCHBAR32(0x30) = 0x21800; + DMIBAR32(0x2c) = 0x86000040; + pci_write_config8(PCI_DEV(0, 0x00, 0), DEVEN, 0x09); + pci_write_config32(PCI_DEV(0, 0x1e, 0), 0x18, 0x00020200); + pci_write_config32(PCI_DEV(0, 0x1e, 0), 0x18, 0x00000000); + reg8 = pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe5); // 0x10 + reg16 = pci_read_config16(PCI_DEV(0, 0x02, 0), 0x0); // 0x8086 + + reg16 = pci_read_config16(PCI_DEV(0, 0x00, 0), GGC); + pci_write_config16(PCI_DEV(0, 0x00, 0), GGC, 0x130); + reg16 = pci_read_config16(PCI_DEV(0, 0x00, 0), GGC); + pci_write_config16(PCI_DEV(0, 0x00, 0), GGC, 0x130); + MCHBAR8(0xb08) = 0x20; + reg8 = pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe6); // 0x11 + reg16 = MCHBAR16(0xc8c); + MCHBAR16(0xc8c) = reg16 | 0x0200; + reg8 = MCHBAR8(0xc8c); + MCHBAR8(0xc8c) = reg8; + MCHBAR8(0xc8c) = 0x12; + pci_write_config8(PCI_DEV(0, 0x02, 0), 0x62, 0x02); + pci_write_config16(PCI_DEV(0, 0x02, 0), 0xe8, 0x8000); + MCHBAR32(0x3004) = 0x48000000; + MCHBAR32(0x3008) = 0xfffffe00; + MCHBAR32(0xb08) = 0x06028220; + MCHBAR32(0xff4) = 0xc6db8b5f; + MCHBAR16(0xff8) = 0x024f; + + // PLL Voltage controlled oscillator + //MCHBAR8(0xc38) = 0x04; + + pci_write_config16(PCI_DEV(0, 0x02, 0), 0xcc, 0x014d); + reg32 = MCHBAR32(0x40); + MCHBAR32(0x40) = 0x0; + reg32 = MCHBAR32(0x40); + MCHBAR32(0x40) = 0x8; + + // POST 0x13 + + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x8, 0x1d); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x8, 0x0); + RCBA32(0x3410) = 0x00020465; + RCBA32(0x88) = 0x0011d000; + RCBA32(0x1fc) = 0x60f; + RCBA32(0x1f4) = 0x86000040; + RCBA32(0x214) = 0x10030509; + RCBA32(0x218) = 0x00020504; + RCBA32(0x220) = 0xc5; + RCBA32(0x3430) = 0x1; + RCBA32(0x2027) = 0x38f6a70d; + RCBA16(0x3e08) = 0x0080; + RCBA16(0x3e48) = 0x0080; + RCBA32(0x3e0e) = 0x00000080; + RCBA32(0x3e4e) = 0x00000080; + RCBA32(0x2034) = 0xb24577cc; + RCBA32(0x1c) = 0x03128010; + RCBA32(0x2010) = 0x400; + RCBA32(0x3400) = 0x4; + RCBA32(0x2080) = 0x18006007; + RCBA32(0x20a0) = 0x18006007; + RCBA32(0x20c0) = 0x18006007; + RCBA32(0x20e0) = 0x18006007; + + pci_write_config32(PCI_DEV(0, 0x1d, 0), 0xca, 0x1); + pci_write_config32(PCI_DEV(0, 0x1d, 1), 0xca, 0x1); + pci_write_config32(PCI_DEV(0, 0x1d, 2), 0xca, 0x1); + pci_write_config32(PCI_DEV(0, 0x1d, 3), 0xca, 0x1); + + RCBA32(0x3100) = 0x42210; + RCBA32(0x3108) = 0x10004321; + RCBA32(0x310c) = 0x00214321; + RCBA32(0x3110) = 0x1; + RCBA32(0x3140) = 0x01460132; + RCBA32(0x3142) = 0x02370146; + RCBA32(0x3144) = 0x32010237; + RCBA32(0x3146) = 0x01463201; + RCBA32(0x3148) = 0x146; + + /* Set C0000-FFFFF to access RAM on both reads and writes */ + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM0, 0x30); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM1, 0x33); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM2, 0x33); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM3, 0x33); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM4, 0x33); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM5, 0x33); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM6, 0x33); + + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_NORMAL_BOOT_MAGIC); + printk(BIOS_DEBUG, " done.\n"); + + /* Wait for MCH BAR to come up + printk(BIOS_DEBUG, "Waiting for MCHBAR to come up..."); + if ((pci_read_config32(PCI_DEV(0, 0x00, 0), 0xe4) & 0x20000) == 0x00) { + do { + reg8 = MCHBAR8(0xb08); + } while (!(reg8 & 0x80)); + } + printk(BIOS_DEBUG, "ok\n"); + */ +} + +void pineview_early_initialization(void) +{ + /* Print some chipset specific information */ + printk(BIOS_DEBUG, "Intel Pineview northbridge\n"); + + /* Setup all BARs required for early PCIe and raminit */ + pineview_setup_bars(); + + /* Change port80 to LPC */ + RCBA32(GCS) &= (~0x04); + + /* Just do it that way */ + RCBA32(0x2010) |= (1 << 10); +} diff --git a/src/northbridge/intel/pineview/gma.c b/src/northbridge/intel/pineview/gma.c new file mode 100644 index 0000000..eca59e9 --- /dev/null +++ b/src/northbridge/intel/pineview/gma.c @@ -0,0 +1,552 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <bootmode.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <pc80/mc146818rtc.h> +#include <edid.h> +#include <drivers/intel/gma/edid.h> +#include <drivers/intel/gma/i915.h> +#include <string.h> +#include <pc80/vga.h> +#include <pc80/vga_io.h> + +#include "chip.h" +#include "pineview.h" + +#define GDRST 0xc0 + +#define LVDS_CLOCK_A_POWERUP_ALL (3 << 8) +#define LVDS_CLOCK_B_POWERUP_ALL (3 << 4) +#define LVDS_CLOCK_BOTH_POWERUP_ALL (3 << 2) +#define DISPPLANE_BGRX888 (0x6<<26) +#define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ + +#define DPLL_INTEGRATED_CRI_CLK_VLV (1<<14) + +#define PGETBL_CTL 0x2020 +#define PGETBL_ENABLED 0x00000001 + +#define BASE_FREQUENCY 120000 + +#if CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT + +static int gtt_setup(void *mmiobase) +{ + unsigned long PGETBL_save; + unsigned long tom; // top of memory + + /* + * The Video BIOS places the GTT right below top of memory. + */ + tom = pci_read_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), TOLUD) << 24; + PGETBL_save = tom - 256 * KiB; + PGETBL_save |= PGETBL_ENABLED; + PGETBL_save |= 2; /* set GTT to 256kb */ + + write32(mmiobase + GFX_FLSH_CNTL, 0); + + write32(mmiobase + PGETBL_CTL, PGETBL_save); + + /* verify */ + if (read32(mmiobase + PGETBL_CTL) & PGETBL_ENABLED) { + printk(BIOS_DEBUG, "gtt_setup is enabled.\n"); + } else { + printk(BIOS_DEBUG, "gtt_setup failed!!!\n"); + return 1; + } + write32(mmiobase + GFX_FLSH_CNTL, 0); + + return 0; +} + +static int intel_gma_init(struct northbridge_intel_pineview_config *conf, + unsigned int pphysbase, unsigned int piobase, + void *pmmio, unsigned int pgfx) +{ + struct edid edid; + struct edid_mode *mode; + u8 edid_data[128]; + unsigned long temp; + int hpolarity, vpolarity; + u32 candp1, candn; + u32 best_delta = 0xffffffff; + u32 target_frequency; + u32 pixel_p1 = 1; + u32 pixel_n = 1; + u32 pixel_m1 = 1; + u32 pixel_m2 = 1; + u32 hactive, vactive, right_border, bottom_border; + u32 vsync, hsync, vblank, hblank, hfront_porch, vfront_porch; + u32 i, j; + u32 uma_size; + u16 reg16; + + printk(BIOS_SPEW, + "i915lightup: graphics %p mmio %p addrport %04x physbase %08x\n", + (void *)pgfx, pmmio, piobase, pphysbase); + + intel_gmbus_read_edid(pmmio + GMBUS0, 3, 0x50, edid_data, 128); + decode_edid(edid_data, sizeof(edid_data), &edid); + mode = &edid.mode; + + hpolarity = (mode->phsync == '-'); + vpolarity = (mode->pvsync == '-'); + hactive = edid.x_resolution; + vactive = edid.y_resolution; + right_border = mode->hborder; + bottom_border = mode->vborder; + vblank = mode->vbl; + hblank = mode->hbl; + vsync = mode->vspw; + hsync = mode->hspw; + hfront_porch = mode->hso; + vfront_porch = mode->vso; + + for (i = 0; i < 2; i++) + for (j = 0; j < 0x100; j++) + /* R=j, G=j, B=j. */ + write32(pmmio + PALETTE(i) + 4 * j, 0x10101 * j); + + write32(pmmio + PCH_PP_CONTROL, PANEL_UNLOCK_REGS + | (read32(pmmio + PCH_PP_CONTROL) & ~PANEL_UNLOCK_MASK)); + + write32(pmmio + MI_ARB_STATE, MI_ARB_C3_LP_WRITE_ENABLE | (1 << 27)); + /* Clean registers. */ + for (i = 0; i < 0x20; i += 4) + write32(pmmio + RENDER_RING_BASE + i, 0); + for (i = 0; i < 0x20; i += 4) + write32(pmmio + FENCE_REG_965_0 + i, 0); + write32(pmmio + PP_ON_DELAYS, 0); + write32(pmmio + PP_OFF_DELAYS, 0); + + /* Disable VGA. */ + write32(pmmio + VGACNTRL, VGA_DISP_DISABLE); + + /* Disable pipes. */ + write32(pmmio + PIPECONF(0), 0); + write32(pmmio + PIPECONF(1), 0); + + /* Init PRB0. */ + write32(pmmio + HWS_PGA, 0x352d2000); + write32(pmmio + PRB0_CTL, 0); + write32(pmmio + PRB0_HEAD, 0); + write32(pmmio + PRB0_TAIL, 0); + write32(pmmio + PRB0_START, 0); + write32(pmmio + PRB0_CTL, 0x0001f001); + + write32(pmmio + D_STATE, DSTATE_PLL_D3_OFF + | DSTATE_GFX_CLOCK_GATING | DSTATE_DOT_CLOCK_GATING); + write32(pmmio + ECOSKPD, 0x00010000); + write32(pmmio + HWSTAM, 0xeffe); + write32(pmmio + PORT_HOTPLUG_EN, conf->gpu_hotplug); + write32(pmmio + INSTPM, 0x08000000 | INSTPM_AGPBUSY_DIS); + + target_frequency = mode->lvds_dual_channel ? mode->pixel_clock + : (2 * mode->pixel_clock); + + /* Find suitable divisors. */ + for (candp1 = 1; candp1 <= 8; candp1++) { + for (candn = 5; candn <= 10; candn++) { + u32 cur_frequency; + u32 m; /* 77 - 131. */ + u32 denom; /* 35 - 560. */ + u32 current_delta; + + denom = candn * candp1 * 7; + /* Doesnt overflow for up to + 5000000 kHz = 5 GHz. */ + m = (target_frequency * denom + + BASE_FREQUENCY / 2) / BASE_FREQUENCY; + + if (m < 77 || m > 131) + continue; + + cur_frequency = (BASE_FREQUENCY * m) / denom; + if (target_frequency > cur_frequency) + current_delta = target_frequency - cur_frequency; + else + current_delta = cur_frequency - target_frequency; + + if (best_delta > current_delta) { + best_delta = current_delta; + pixel_n = candn; + pixel_p1 = candp1; + pixel_m2 = ((m + 3) % 5) + 7; + pixel_m1 = (m - pixel_m2) / 5; + } + } + } + + if (best_delta == 0xffffffff) { + printk (BIOS_ERR, "Couldn't find GFX clock divisors\n"); + return -1; + } + + printk(BIOS_INFO, "bringing up panel at resolution %d x %d\n", + hactive, vactive); + printk(BIOS_DEBUG, "Borders %d x %d\n", right_border, bottom_border); + printk(BIOS_DEBUG, "Blank %d x %d\n", hblank, vblank); + printk(BIOS_DEBUG, "Sync %d x %d\n", hsync, vsync); + printk(BIOS_DEBUG, "Front porch %d x %d\n", hfront_porch, vfront_porch); + printk(BIOS_DEBUG, (conf->gpu_lvds_use_spread_spectrum_clock + ? "Spread spectrum clock\n" + : "DREF clock\n")); + printk(BIOS_DEBUG, (mode->lvds_dual_channel + ? "Dual channel\n" + : "Single channel\n")); + printk(BIOS_DEBUG, "Polarities %d, %d\n", + hpolarity, vpolarity); + printk(BIOS_DEBUG, "Pixel N=%d, M1=%d, M2=%d, P1=%d\n", + pixel_n, pixel_m1, pixel_m2, pixel_p1); + printk(BIOS_DEBUG, "Pixel clock %d kHz\n", + BASE_FREQUENCY * (5 * pixel_m1 + pixel_m2) / pixel_n + / (pixel_p1 * 7)); + +#if !IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE) + write32(pmmio + PF_WIN_SZ(0), vactive | (hactive << 16)); + write32(pmmio + PF_WIN_POS(0), 0); + write32(pmmio + PF_CTL(0),PF_ENABLE | PF_FILTER_MED_3x3); + write32(pmmio + PFIT_CONTROL, PFIT_ENABLE | (1 << PFIT_PIPE_SHIFT) | HORIZ_AUTO_SCALE | VERT_AUTO_SCALE); +#else + /* Disable panel fitter (we're in native resolution). */ + write32(pmmio + PF_CTL(0), 0); + write32(pmmio + PF_WIN_SZ(0), 0); + write32(pmmio + PF_WIN_POS(0), 0); + write32(pmmio + PFIT_PGM_RATIOS, 0); + write32(pmmio + PFIT_CONTROL, 0); +#endif + + mdelay(1); + + write32(pmmio + DSPCNTR(0), DISPPLANE_BGRX888 + | DISPPLANE_SEL_PIPE_B | DISPPLANE_GAMMA_ENABLE); + + mdelay(1); + write32(pmmio + PP_CONTROL, PANEL_UNLOCK_REGS + | (read32(pmmio + PP_CONTROL) & ~PANEL_UNLOCK_MASK)); + write32(pmmio + FP0(1), + ((pixel_n - 2) << 16) + | ((pixel_m1 - 2) << 8) | pixel_m2); + write32(pmmio + DPLL(1), + DPLL_VGA_MODE_DIS | + DPLL_VCO_ENABLE | DPLLB_MODE_LVDS + | (mode->lvds_dual_channel ? DPLLB_LVDS_P2_CLOCK_DIV_7 + : DPLLB_LVDS_P2_CLOCK_DIV_14) + | (conf->gpu_lvds_use_spread_spectrum_clock + ? DPLL_INTEGRATED_CLOCK_VLV | DPLL_INTEGRATED_CRI_CLK_VLV + : 0) + | (pixel_p1 << 16) + | (pixel_p1)); + mdelay(1); + write32(pmmio + DPLL(1), + DPLL_VGA_MODE_DIS | + DPLL_VCO_ENABLE | DPLLB_MODE_LVDS + | (mode->lvds_dual_channel ? DPLLB_LVDS_P2_CLOCK_DIV_7 + : DPLLB_LVDS_P2_CLOCK_DIV_14) + | ((conf->gpu_lvds_use_spread_spectrum_clock ? 3 : 0) << 13) + | (pixel_p1 << 16) + | (pixel_p1)); + mdelay(1); + write32(pmmio + HTOTAL(1), + ((hactive + right_border + hblank - 1) << 16) + | (hactive - 1)); + write32(pmmio + HBLANK(1), + ((hactive + right_border + hblank - 1) << 16) + | (hactive + right_border - 1)); + write32(pmmio + HSYNC(1), + ((hactive + right_border + hfront_porch + hsync - 1) << 16) + | (hactive + right_border + hfront_porch - 1)); + + write32(pmmio + VTOTAL(1), ((vactive + bottom_border + vblank - 1) << 16) + | (vactive - 1)); + write32(pmmio + VBLANK(1), ((vactive + bottom_border + vblank - 1) << 16) + | (vactive + bottom_border - 1)); + write32(pmmio + VSYNC(1), + (vactive + bottom_border + vfront_porch + vsync - 1) + | (vactive + bottom_border + vfront_porch - 1)); + +#if !IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE) + write32(pmmio + PIPESRC(1), (639 << 16) | 399); +#else + write32(pmmio + PIPESRC(1), ((hactive - 1) << 16) | (vactive - 1)); +#endif + mdelay(1); + + write32(pmmio + DSPSIZE(0), (hactive - 1) | ((vactive - 1) << 16)); + write32(pmmio + DSPPOS(0), 0); + + /* Backlight init. */ + write32(pmmio + FW_BLC_SELF, FW_BLC_SELF_EN_MASK); + write32(pmmio + FW_BLC, 0x011d011a); + write32(pmmio + FW_BLC2, 0x00000102); + write32(pmmio + FW_BLC_SELF, FW_BLC_SELF_EN_MASK); + write32(pmmio + FW_BLC_SELF, 0x0001003f); + write32(pmmio + FW_BLC, 0x011d0109); + write32(pmmio + FW_BLC2, 0x00000102); + write32(pmmio + FW_BLC_SELF, FW_BLC_SELF_EN_MASK); + write32(pmmio + BLC_PWM_CTL, conf->gpu_backlight); + + edid.bytes_per_line = (edid.bytes_per_line + 63) & ~63; + write32(pmmio + DSPADDR(0), 0); + write32(pmmio + DSPSURF(0), 0); + write32(pmmio + DSPSTRIDE(0), edid.bytes_per_line); + write32(pmmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888 + | DISPPLANE_SEL_PIPE_B | DISPPLANE_GAMMA_ENABLE); + mdelay(1); + + write32(pmmio + PIPECONF(1), PIPECONF_ENABLE); + write32(pmmio + LVDS, LVDS_ON + | (hpolarity << 20) | (vpolarity << 21) + | (mode->lvds_dual_channel ? LVDS_CLOCK_B_POWERUP_ALL + | LVDS_CLOCK_BOTH_POWERUP_ALL : 0) + | LVDS_CLOCK_A_POWERUP_ALL + | LVDS_PIPE(1)); + + write32(pmmio + PP_CONTROL, PANEL_UNLOCK_REGS | PANEL_POWER_OFF); + write32(pmmio + PP_CONTROL, PANEL_UNLOCK_REGS | PANEL_POWER_RESET); + mdelay(1); + write32(pmmio + PP_CONTROL, PANEL_UNLOCK_REGS + | PANEL_POWER_ON | PANEL_POWER_RESET); + + printk (BIOS_DEBUG, "waiting for panel powerup\n"); + while (1) { + u32 reg32; + reg32 = read32(pmmio + PP_STATUS); + if ((reg32 & PP_SEQUENCE_MASK) == PP_SEQUENCE_NONE) + break; + } + printk (BIOS_DEBUG, "panel powered up\n"); + + write32(pmmio + PP_CONTROL, PANEL_POWER_ON | PANEL_POWER_RESET); + + /* Clear interrupts. */ + write32(pmmio + DEIIR, 0xffffffff); + write32(pmmio + SDEIIR, 0xffffffff); + write32(pmmio + IIR, 0xffffffff); + write32(pmmio + IMR, 0xffffffff); + write32(pmmio + EIR, 0xffffffff); + + if (gtt_setup(pmmio)) { + printk(BIOS_ERR, "ERROR: GTT Setup Failed!!!\n"); + return 0; + } + + /* Setup GTT. */ + + reg16 = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0, 0)), GGC); + uma_size = 0; + if (!(reg16 & 2)) { + reg16 >>= 4; + reg16 &= 7; + switch (reg16) { + case 1: + uma_size = 1024; + break; + case 3: + uma_size = 8192; + break; + } + + printk(BIOS_DEBUG, "%dM UMA\n", uma_size >> 10); + } + + for (i = 0; i < (uma_size - 256) / 4; i++) + { + outl((i << 2) | 1, piobase); + outl(pphysbase + (i << 12) + 1, piobase + 4); + } + + temp = read32(pmmio + PGETBL_CTL); + printk(BIOS_INFO, "GTT PGETBL_CTL register: 0x%lx\n", temp); + + if (temp & 1) + printk(BIOS_INFO, "GTT Enabled\n"); + else + printk(BIOS_ERR, "ERROR: GTT is still Disabled!!!\n"); + +#if !IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE) + vga_misc_write(0x67); + + write32(pmmio + DSPCNTR(0), DISPPLANE_SEL_PIPE_B); + + write32(pmmio + VGACNTRL, 0x02c4008e | VGA_PIPE_B_SELECT); + + vga_textmode_init(); +#else + printk(BIOS_SPEW, "memset %p to 0x00 for %d bytes\n", + (void *)pgfx, hactive * vactive * 4); + memset((void *)pgfx, 0x00, hactive * vactive * 4); + + set_vbe_mode_info_valid(&edid, pgfx); +#endif + return 0; +} +#endif + +static void gma_func0_init(struct device *dev) +{ + u32 reg32; + + /* Unconditionally reset graphics */ + pci_write_config8(dev, GDRST, 1); + udelay(50); + pci_write_config8(dev, GDRST, 0); + /* wait for device to finish */ + while (pci_read_config8(dev, GDRST) & 1) { }; + + /* IGD needs to be Bus Master */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER + | PCI_COMMAND_IO | PCI_COMMAND_MEMORY); + +#if !CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT + /* PCI Init, will run VBIOS */ + pci_dev_init(dev); +#endif + + +#if CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT + /* This should probably run before post VBIOS init. */ + printk(BIOS_SPEW, "Initializing VGA without OPROM.\n"); + void *mmiobase; + u32 iobase, graphics_base; + struct northbridge_intel_pineview_config *conf = dev->chip_info; + + iobase = dev->resource_list[1].base; + mmiobase = (void *)(uintptr_t)dev->resource_list[0].base; + graphics_base = dev->resource_list[2].base; + + printk(BIOS_SPEW, "GMADR=0x%08x GTTADR=0x%08x\n", + pci_read_config32(dev, GMADR), + pci_read_config32(dev, GTTADR) + ); + + int err; + err = intel_gma_init(conf, pci_read_config32(dev, 0x5c) & ~0xf, + iobase, mmiobase, graphics_base); + if (err == 0) + gfx_set_init_done(1); +#endif +} + +/* This doesn't reclaim stolen UMA memory, but IGD could still + be reenabled later. */ +static void gma_func0_disable(struct device *dev) +{ + struct device *dev_host = dev_find_slot(0, PCI_DEVFN(0x0, 0)); + + pci_write_config16(dev, GCFC, 0xa00); + pci_write_config16(dev_host, GGC, (1 << 1)); + + unsigned int reg32 = pci_read_config32(dev_host, DEVEN); + reg32 &= ~(DEVEN_D2F0 | DEVEN_D2F1); + pci_write_config32(dev_host, DEVEN, reg32); + + dev->enabled = 0; +} + +static void gma_func1_init(struct device *dev) +{ + u32 reg32; + + /* IGD needs to be Bus Master, also enable IO accesss */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + pci_write_config32(dev, PCI_COMMAND, reg32 | + PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO); + + /* Permanently set tft_brightness to 0xff. Ignore nvramtool configuration */ + pci_write_config8(dev, 0xf4, 0xff); +} + +static void gma_set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +const struct i915_gpu_controller_info * +intel_gma_get_controller_info(void) +{ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x2,0)); + if (!dev) { + return NULL; + } + struct northbridge_intel_pineview_config *chip = dev->chip_info; + if (!chip) { + return NULL; + } + return &chip->gfx; +} + +static void gma_ssdt(device_t device) +{ + const struct i915_gpu_controller_info *gfx = intel_gma_get_controller_info(); + if (!gfx) { + return; + } + + drivers_intel_gma_displays_ssdt_generate(gfx); +} + +static struct pci_operations gma_pci_ops = { + .set_subsystem = gma_set_subsystem, +}; + +static struct device_operations gma_func0_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = gma_func0_init, + .acpi_fill_ssdt_generator = gma_ssdt, + .scan_bus = 0, + .enable = 0, + .disable = gma_func0_disable, + .ops_pci = &gma_pci_ops, +}; + + +static struct device_operations gma_func1_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = gma_func1_init, + .scan_bus = 0, + .enable = 0, + .ops_pci = &gma_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { 0x27a2, 0x27ae, 0 }; + +static const struct pci_driver i945_gma_func0_driver __pci_driver = { + .ops = &gma_func0_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; + +static const struct pci_driver i945_gma_func1_driver __pci_driver = { + .ops = &gma_func1_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x27a6, +}; diff --git a/src/northbridge/intel/pineview/northbridge.c b/src/northbridge/intel/pineview/northbridge.c new file mode 100644 index 0000000..bfe0bf5 --- /dev/null +++ b/src/northbridge/intel/pineview/northbridge.c @@ -0,0 +1,302 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/io.h> +#include <stdint.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/hypertransport.h> +#include <stdlib.h> +#include <string.h> +#include <cpu/cpu.h> +#include <boot/tables.h> +#include <arch/acpi.h> +#include <cbmem.h> +#include "pineview.h" +#include "arch/acpi.h" + +/* Reserve segments A and B: + * + * 0xa0000 - 0xbffff: legacy VGA + */ +static const int legacy_hole_base_k = 0xa0000 / 1024; +static const int legacy_hole_size_k = 128; + +static int decode_pcie_bar(u32 *const base, u32 *const len) +{ + *base = 0; + *len = 0; + + const device_t dev = dev_find_slot(0, PCI_DEVFN(0, 0)); + if (!dev) + return 0; + + const u32 pciexbar_reg = pci_read_config32(dev, PCIEXBAR); + + if (!(pciexbar_reg & (1 << 0))) + return 0; + + switch ((pciexbar_reg >> 1) & 3) { + case 0: /* 256MB */ + *base = pciexbar_reg & (0x0f << 28); + *len = 256 * 1024 * 1024; + return 1; + case 1: /* 128M */ + *base = pciexbar_reg & (0x1f << 27); + *len = 128 * 1024 * 1024; + return 1; + case 2: /* 64M */ + *base = pciexbar_reg & (0x3f << 26); + *len = 64 * 1024 * 1024; + return 1; + } + + return 0; +} + +static void mch_domain_read_resources(device_t dev) +{ + u64 tom, touud; + u32 tomk, tolud, uma_sizek = 0, usable_tomk; + u32 pcie_config_base, pcie_config_size; + + /* Total Memory 2GB example: + * + * 00000000 0000MB-2014MB 2014MB RAM (writeback) + * 7de00000 2014MB-2016MB 2MB GFX GTT (uncached) + * 7e000000 2016MB-2048MB 32MB GFX UMA (uncached) + * 80000000 2048MB TOLUD + * 80000000 2048MB TOM + * + * Total Memory 4GB example: + * + * 00000000 0000MB-3038MB 3038MB RAM (writeback) + * bde00000 3038MB-3040MB 2MB GFX GTT (uncached) + * be000000 3040MB-3072MB 32MB GFX UMA (uncached) + * be000000 3072MB TOLUD + * 100000000 4096MB TOM + * 100000000 4096MB-5120MB 1024MB RAM (writeback) + * 140000000 5120MB TOUUD + */ + + pci_domain_read_resources(dev); + + /* Top of Upper Usable DRAM, including remap */ + touud = pci_read_config16(dev, 0xa2); + touud <<= 20; + + /* Top of Lower Usable DRAM */ + tolud = pci_read_config16(dev, 0xb0) & 0xfff0; + tolud <<= 16; + + /* Top of Memory - does not account for any UMA */ + tom = pci_read_config16(dev, 0xa0) & 0x1ff; + tom <<= 27; + + printk(BIOS_DEBUG, "TOUUD 0x%llx TOLUD 0x%08x TOM 0x%llx\n", + touud, tolud, tom); + + tomk = tolud >> 10; + + /* Graphics memory comes next */ + const u16 ggc = pci_read_config16(dev, GGC); + + /* Graphics memory */ + const u32 gms_sizek = decode_igd_memory_size((ggc >> 4) & 0xf); + printk(BIOS_DEBUG, "%uM UMA", gms_sizek >> 10); + tomk -= gms_sizek; + + /* GTT Graphics Stolen Memory Size (GGMS) */ + const u32 gsm_sizek = decode_igd_gtt_size((ggc >> 8) & 0xf); + printk(BIOS_DEBUG, " and %uM GTT\n", gsm_sizek >> 10); + tomk -= gsm_sizek; + + uma_sizek = gms_sizek + gsm_sizek; + + usable_tomk = ALIGN_DOWN(tomk, 64 << 10); + if (tomk - usable_tomk > (16 << 10)) + usable_tomk = tomk; + + printk(BIOS_INFO, "Available memory below 4GB: %uM\n", usable_tomk >> 10); + + /* Report the memory regions */ + ram_resource(dev, 3, 0, legacy_hole_base_k); + ram_resource(dev, 4, legacy_hole_base_k + legacy_hole_size_k, + (usable_tomk - (legacy_hole_base_k + legacy_hole_size_k))); + + mmio_resource(dev, 5, legacy_hole_base_k, + (0xc0000 >> 10) - legacy_hole_base_k); +// reserved_ram_resource(dev, 6, 0xc0000 >> 10, +// (0x100000 - 0xc0000) >> 10); + + /* + * If >= 4GB installed then memory from TOLUD to 4GB + * is remapped above TOM, TOUUD will account for both + */ + touud >>= 10; /* Convert to KB */ + if (touud > 4096 * 1024) { + ram_resource(dev, 7, 4096 * 1024, touud - (4096 * 1024)); + printk(BIOS_INFO, "Available memory above 4GB: %lluM\n", + (touud >> 10) - 4096); + } + + printk(BIOS_DEBUG, "Adding UMA memory area base=0x%llx " + "size=0x%llx\n", ((u64)tomk) << 10, ((u64)uma_sizek) << 10); + /* Don't use uma_resource() as our UMA touches the PCI hole. */ + fixed_mem_resource(dev, 8, tomk, uma_sizek, IORESOURCE_RESERVE); + + if (decode_pcie_bar(&pcie_config_base, &pcie_config_size)) { + printk(BIOS_DEBUG, "Adding PCIe config bar base=0x%08x " + "size=0x%x\n", pcie_config_base, pcie_config_size); + fixed_mem_resource(dev, 9, pcie_config_base >> 10, + pcie_config_size >> 10, IORESOURCE_RESERVE); + } +/* + pci_write_config8(dev, 0x9d, + pci_read_config8(dev, 0x9d) | 0x8); + + pci_write_config8(dev, 0x9e, + pci_read_config8(dev, 0x9e) & ~0x6); + + pci_write_config8(dev, 0x9e, + pci_read_config8(dev, 0x9e) | 1); +*/ + set_top_of_ram(tomk << 10); +} + +static void mch_domain_set_resources(device_t dev) +{ + struct resource *resource; + int i; + + for (i = 3; i < 10; ++i) { + /* Report read resources. */ + resource = probe_resource(dev, i); + if (resource) + report_resource_stored(dev, resource, ""); + } + + assign_resources(dev->link_list); +} + +static void mch_domain_init(device_t dev) +{ + u32 reg32; + + /* Enable SERR */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_SERR; + pci_write_config32(dev, PCI_COMMAND, reg32); +} + +static struct device_operations pci_domain_ops = { + .read_resources = mch_domain_read_resources, + .set_resources = mch_domain_set_resources, + .enable_resources = NULL, + .init = mch_domain_init, + .scan_bus = pci_domain_scan_bus, + .ops_pci_bus = pci_bus_default_ops, +// .write_acpi_tables = northbridge_write_acpi_tables, +// .acpi_fill_ssdt_generator = generate_cpu_entries, +}; + +static void cpu_bus_init(device_t dev) +{ + initialize_cpus(dev->link_list); +} + +static struct device_operations cpu_bus_ops = { + .read_resources = DEVICE_NOOP, + .set_resources = DEVICE_NOOP, + .enable_resources = DEVICE_NOOP, + .init = cpu_bus_init, + .scan_bus = 0, +}; + + +static void enable_dev(device_t dev) +{ + /* Set the operations if it is a special bus type */ + if (dev->path.type == DEVICE_PATH_DOMAIN) { + dev->ops = &pci_domain_ops; +#if CONFIG_HAVE_ACPI_RESUME + switch (pci_read_config32(dev_find_slot(0, PCI_DEVFN(0, 0)), /*D0F0_SKPD*/0xdc)) { + case SKPAD_NORMAL_BOOT_MAGIC: + printk(BIOS_DEBUG, "Normal boot.\n"); + acpi_slp_type=0; + break; + case SKPAD_ACPI_S3_MAGIC: + printk(BIOS_DEBUG, "S3 Resume.\n"); + acpi_slp_type=3; + break; + default: + printk(BIOS_DEBUG, "Unknown boot method, assuming normal.\n"); + acpi_slp_type=0; + break; + } +#endif + } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { + dev->ops = &cpu_bus_ops; + } +} + +static void pineview_init(void *const chip_info) +{ + int dev, fn, bit_base; + + struct device *const d0f0 = dev_find_slot(0, 0); + + /* Hide internal functions based on devicetree info. */ + for (dev = 3; dev > 0; --dev) { + switch (dev) { + case 3: /* ME */ + fn = 3; + bit_base = 6; + break; + case 2: /* IGD */ + fn = 1; + bit_base = 3; + break; + case 1: /* PEG */ + fn = 0; + bit_base = 1; + break; + } + for (; fn >= 0; --fn) { + const struct device *const d = + dev_find_slot(0, PCI_DEVFN(dev, fn)); + if (!d || d->enabled) continue; + const u32 deven = pci_read_config32(d0f0, DEVEN); + pci_write_config32(d0f0, DEVEN, + deven & ~(1 << (bit_base + fn))); + } + } + + const u32 deven = pci_read_config32(d0f0, DEVEN); + if (!(deven & (0xf << 6))) + pci_write_config32(d0f0, DEVEN, deven & ~(1 << 14)); +} + +struct chip_operations northbridge_intel_pineview_ops = { + CHIP_NAME("Intel Pineview Northbridge") + .enable_dev = enable_dev, + .init = pineview_init, +}; diff --git a/src/northbridge/intel/pineview/pineview.h b/src/northbridge/intel/pineview/pineview.h index 7bd4c44..a0b86c3 100644 --- a/src/northbridge/intel/pineview/pineview.h +++ b/src/northbridge/intel/pineview/pineview.h @@ -31,6 +31,172 @@ /* Everything below this line is ignored in the DSDT */ #ifndef __ACPI__ +typedef enum { + FSB_CLOCK_667MHz = 0, + FSB_CLOCK_800MHz = 1, +} fsb_clock_t; + +typedef enum { + MEM_CLOCK_667MHz = 0, + MEM_CLOCK_800MHz = 1, +} mem_clock_t; + +typedef enum { + DDR2 = 2, + DDR3 = 3, +} ddr_t; + +typedef enum { /* as in DDR3 spd */ + CHIP_WIDTH_x4 = 0, + CHIP_WIDTH_x8 = 1, + CHIP_WIDTH_x16 = 2, + CHIP_WIDTH_x32 = 3, +} chip_width_t; + +typedef enum { /* as in DDR3 spd */ + CHIP_CAP_256M = 0, + CHIP_CAP_512M = 1, + CHIP_CAP_1G = 2, + CHIP_CAP_2G = 3, + CHIP_CAP_4G = 4, + CHIP_CAP_8G = 5, + CHIP_CAP_16G = 6, +} chip_capacity_t; + +typedef struct { + unsigned int CAS; + fsb_clock_t fsb_clock; + mem_clock_t mem_clock; + unsigned int tRAS; + unsigned int tRP; + unsigned int tRCD; + unsigned int tWR; + unsigned int tRFC; + unsigned int tWTR; + unsigned int tRRD; + unsigned int tRTP; +} timings_t; + +typedef struct { + unsigned int card_type; /* 0x0: unpopulated, + 0xa - 0xf: raw card type A - F */ + u8 type; + chip_width_t width; + chip_capacity_t chip_capacity; + unsigned int page_size; /* of whole DIMM in Bytes (4096 or 8192) */ + unsigned int sides; + unsigned int banks; + unsigned int ranks; + unsigned int rows; + unsigned int cols; + unsigned int cas_latencies; + unsigned int tAAmin; + unsigned int tCKmin; + unsigned int tWR; + unsigned int tRP; + unsigned int tRCD; + unsigned int tRAS; + unsigned int rank_capacity_mb; /* per rank in Mega Bytes */ + u8 spd_data[256]; +} dimminfo_t; + +struct pllparam { + u8 kcoarse[2][72]; + u8 pi[2][72]; + u8 dben[2][72]; + u8 dbsel[2][72]; + u8 clkdelay[2][72]; +} __attribute__ ((packed)); + +typedef struct sys_info { + u8 maxpi; + u8 pioffset; + u8 pi[8]; + u16 coarsectrl; + u16 coarsedelay; + u16 mediumphase; + u16 readptrdelay; + + int txt_enabled; + int cores; + int boot_path; + int max_ddr2_mhz; + int max_ddr3_mt; + int max_fsb_mhz; + int max_render_mhz; + int enable_igd; + int enable_peg; + u16 ggc; + + int dimm_config[2]; + int dimms_per_ch; + int spd_type; + int channel_capacity[2]; + timings_t selected_timings; + dimminfo_t dimms[4]; + u8 spd_map[4]; + + u8 nodll; + u8 async; + u8 dt0mode; + u8 mvco4x; /* 0 (8x) or 1 (4x) */ +} sysinfo_t; + +#define DIMM_TCO_BASE 0x30 +#define BURSTLENGTH 8 + +#define BOOT_PATH_NORMAL 0 +#define BOOT_PATH_RESET 1 +#define BOOT_PATH_RESUME 2 + +#define SYSINFO_DIMM_NOT_POPULATED 0x00 +#define SYSINFO_DIMM_X16SS 0x01 +#define SYSINFO_DIMM_X16DS 0x02 +#define SYSINFO_DIMM_X8DS 0x05 +#define SYSINFO_DIMM_X8DDS 0x06 + +#define TOTAL_CHANNELS 1 +#define TOTAL_DIMMS 2 + +#define DIMM_IS_POPULATED(dimms, idx) (dimms[idx].card_type != 0) +#define IF_DIMM_POPULATED(dimms, idx) if (dimms[idx].card_type != 0) +#define ONLY_DIMMA_IS_POPULATED(dimms, ch) ( \ + (DIMM_IS_POPULATED(dimms, (ch == 0) ? 0 : 2) && \ + !DIMM_IS_POPULATED(dimms, (ch == 0) ? 1 : 3))) +#define ONLY_DIMMB_IS_POPULATED(dimms, ch) ( \ + (DIMM_IS_POPULATED(dimms, (ch == 0) ? 1 : 3) && \ + !DIMM_IS_POPULATED(dimms, (ch == 0) ? 0 : 2))) +#define BOTH_DIMMS_ARE_POPULATED(dimms, ch) ( \ + (DIMM_IS_POPULATED(dimms, (ch == 0) ? 0 : 2) && \ + (DIMM_IS_POPULATED(dimms, (ch == 0) ? 1 : 3)))) +#define FOR_EACH_DIMM(idx) \ + for (idx = 0; idx < TOTAL_DIMMS; ++idx) +#define FOR_EACH_POPULATED_DIMM(dimms, idx) \ + FOR_EACH_DIMM(idx) IF_DIMM_POPULATED(dimms, idx) +#define CHANNEL_IS_POPULATED(dimms, idx) ((dimms[idx<<1].card_type != 0) || (dimms[(idx<<1) + 1].card_type != 0)) +#define CHANNEL_IS_CARDF(dimms, idx) ((dimms[idx<<1].card_type == 0xf) || (dimms[(idx<<1) + 1].card_type == 0xf)) +#define IF_CHANNEL_POPULATED(dimms, idx) if ((dimms[idx<<1].card_type != 0) || (dimms[(idx<<1) + 1].card_type != 0)) +#define FOR_EACH_CHANNEL(idx) \ + for (idx = 0; idx < TOTAL_CHANNELS; ++idx) +#define FOR_EACH_POPULATED_CHANNEL(dimms, idx) \ + FOR_EACH_CHANNEL(idx) IF_CHANNEL_POPULATED(dimms, idx) + +#define RANKS_PER_CHANNEL 4 +#define RANK_IS_POPULATED(dimms, ch, r) \ + ((dimms[ch<<1].card_type && ((r) < dimms[ch<<1].ranks)) || \ + (dimms[(ch<<1) + 1].card_type && ((r) >= 2) && ((r) < (dimms[(ch<<1) + 1].ranks + 2)))) +#define IF_RANK_POPULATED(dimms, ch, r) \ + if ((dimms[ch<<1].card_type && ((r) < dimms[ch<<1].ranks)) || \ + (dimms[(ch<<1) + 1].card_type && ((r) >= 2) && ((r) < (dimms[(ch<<1) + 1].ranks + 2)))) +#define FOR_EACH_RANK_IN_CHANNEL(r) \ + for (r = 0; r < RANKS_PER_CHANNEL; ++r) +#define FOR_EACH_POPULATED_RANK_IN_CHANNEL(dimms, ch, r) \ + FOR_EACH_RANK_IN_CHANNEL(r) IF_RANK_POPULATED(dimms, ch, r) +#define FOR_EACH_RANK(ch, r) \ + FOR_EACH_CHANNEL(ch) FOR_EACH_RANK_IN_CHANNEL(r) +#define FOR_EACH_POPULATED_RANK(dimms, ch, r) \ + FOR_EACH_RANK(ch, r) IF_RANK_POPULATED(dimms, ch, r) + /* Device 0:0.0 PCI configuration space (Host Bridge) */ #define EPBAR 0x40 @@ -69,7 +235,7 @@ #define TOUUD 0xa2 #define GBSM 0xa4 #define BGSM 0xa8 -#define TSEGMB 0xac +#define TSEG 0xac #define TOLUD 0xb0 /* Top of Low Used Memory */ #define ERRSTS 0xc8 #define ERRCMD 0xca @@ -97,6 +263,8 @@ #define GCFC 0xf0 /* Graphics Clock Frequency & Gating Control */ +#define GPIO32(x) *((volatile u32 *)(DEFAULT_GPIOBASE + x)) + /* * MCHBAR */ @@ -121,9 +289,16 @@ #define DMIBAR16(x) *((volatile u16 *)(DEFAULT_DMIBAR + x)) #define DMIBAR32(x) *((volatile u32 *)(DEFAULT_DMIBAR + x)) +void pineview_early_initialization(void); +u32 decode_igd_memory_size(const u32 gms); +u32 decode_igd_gtt_size(const u32 gsm); + /* provided by mainboard code */ void setup_ich7_gpios(void); +struct acpi_rsdp; +unsigned long northbridge_write_acpi_tables(unsigned long start, struct acpi_rsdp *rsdp); + #endif /* __ACPI__ */ #endif /* NORTHBRIDGE_INTEL_PINEVIEW_H */ diff --git a/src/northbridge/intel/pineview/ram_calc.c b/src/northbridge/intel/pineview/ram_calc.c index d7cc732..6ee4d27 100644 --- a/src/northbridge/intel/pineview/ram_calc.c +++ b/src/northbridge/intel/pineview/ram_calc.c @@ -17,46 +17,55 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* Use simple device model for this file even in ramstage */ #define __SIMPLE_DEVICE__ #include <arch/io.h> +#include <console/console.h> #include <cbmem.h> #include <northbridge/intel/pineview/pineview.h> -static unsigned long find_ramtop(void) +/** Decodes used Graphics Mode Select (GMS) to kilobytes. */ +u32 decode_igd_memory_size(const u32 gms) { - uint32_t tom; - - if (pci_read_config8(PCI_DEV(0, 0x0, 0), DEVEN) & (DEVEN_D2F0 | DEVEN_D2F1)) { - /* IGD enabled, get top of Memory from BSM register */ - tom = pci_read_config32(PCI_DEV(0,2,0), BSM); - } else { - tom = (pci_read_config8(PCI_DEV(0,0,0), TOLUD) & 0xf7) << 24; - } - - /* if TSEG enabled subtract size */ - switch(pci_read_config8(PCI_DEV(0, 0, 0), ESMRAM) & 0x07) { - case 0x01: - /* 1MB TSEG */ - tom -= 0x100000; - break; - case 0x03: - /* 2MB TSEG */ - tom -= 0x200000; - break; - case 0x05: - /* 8MB TSEG */ - tom -= 0x800000; - break; + switch (gms) { + case 0: + return 0; + case 1: + return 1 << 10; + case 2: + return 4 << 10; + case 3: + return 8 << 10; + case 4: + return 16 << 10; + case 5: + return 32 << 10; + case 6: + return 48 << 10; + case 7: + return 64 << 10; + case 8: + return 128 << 10; + case 9: + return 256 << 10; default: - /* TSEG either disabled or invalid */ - break; + printk(BIOS_DEBUG, "Bad Graphics Mode Select (GMS) setting.\n"); + return 0; } - return (unsigned long) tom; } -void *cbmem_top(void) +/** Decodes used Graphics Stolen Memory (GSM) to kilobytes. */ +u32 decode_igd_gtt_size(const u32 gsm) { - return (void *) find_ramtop(); + switch (gsm) { + case 2: + case 3: + case 0: + return 0; + case 1: + return 1 << 10; + default: + printk(BIOS_DEBUG, "Bad Graphics Stolen Memory (GSM) setting.\n"); + return 0; + } } diff --git a/src/northbridge/intel/pineview/raminit.c b/src/northbridge/intel/pineview/raminit.c new file mode 100644 index 0000000..f3edfa3 --- /dev/null +++ b/src/northbridge/intel/pineview/raminit.c @@ -0,0 +1,2841 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Damien Zammit <damien(a)zamaudio.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <cbmem.h> +#include <console/console.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/mtrr.h> +#include <delay.h> +#include <halt.h> +#include <lib.h> +#include "pineview.h" +#include "raminit.h" +#include <pc80/mc146818rtc.h> +#include <spd.h> +#include <string.h> + +/* Debugging macros. */ +#if CONFIG_DEBUG_RAM_SETUP +#define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x) +#else +#define PRINTK_DEBUG(x...) +#endif + +#define MAX_TCLK_667 0x30 +#define MAX_TCLK_800 0x25 +#define MAX_TAC_667 0x45 +#define MAX_TAC_800 0x40 + +#define NOP_CMD (1 << 1) +#define PRE_CHARGE_CMD (1 << 2) +#define MRS_CMD ((1 << 2) | (1 << 1)) +#define EMRS_CMD (1 << 3) +#define EMRS1_CMD (EMRS_CMD | (1 << 4)) +#define EMRS2_CMD (EMRS_CMD | (1 << 5)) +#define EMRS3_CMD (EMRS_CMD | (1 << 5) | (1 << 4)) +#define ZQCAL_CMD ((1 << 3) | (1 << 1)) +#define CBR_CMD ((1 << 3) | (1 << 2)) +#define NORMAL_OP_CMD ((1 << 3) | (1 << 2) | (1 << 1)) + +#define UBDIMM 1 +#define SODIMM 2 + +#define barrier() __asm__ __volatile__("": : :"memory") + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#if 0 +static void sdram_dump_mchbar_registers(void) +{ + int i; + PRINTK_DEBUG("Dumping MCHBAR Registers\n"); + + for (i=0; i<0xfff; i+=4) { + if (MCHBAR32(i) == 0) + continue; + PRINTK_DEBUG("0x%04x: 0x%08x\n", i, MCHBAR32(i)); + } +} +#endif + +static void sdram_read_spds(sysinfo_t *s) +{ + u8 i, j, chan, swap; + swap = 0; + int status = 0; + s->dt0mode = 0; + FOR_EACH_DIMM(i) { + for (j = 0; j < 64; j++) { + status = spd_read_byte(s->spd_map[i], j); + if (status < 0) { + s->dimms[i].card_type = 0; + break; + } + s->dimms[i].spd_data[j] = (u8) status; + PRINTK_DEBUG("%02x ", (u8) status); + if (j % 16 == 15) + PRINTK_DEBUG("\n"); + if (j == 62) + s->dimms[i].card_type = ((u8) status) & 0x1f; + } + PRINTK_DEBUG("\n"); + } + + s->spd_type = 0; + FOR_EACH_POPULATED_DIMM(s->dimms, i) { + switch (s->dimms[i].spd_data[2]) { + case 0x8: + s->spd_type = DDR2; + break; + case 0xb: + default: + die("DIMM type mismatch\n"); + break; + } + } + + int fail = 1; + FOR_EACH_POPULATED_DIMM(s->dimms, i) { + s->dimms[i].type = 0; + if (s->dimms[i].spd_data[20] == 0x2) { + s->dimms[i].type = UBDIMM; + } else if (s->dimms[i].spd_data[20] == 0x4) { + s->dimms[i].type = SODIMM; + } + s->dimms[i].sides = (s->dimms[i].spd_data[5] & 0x7) + 1; + s->dimms[i].banks = (s->dimms[i].spd_data[17] >> 2) - 1; + s->dimms[i].chip_capacity = s->dimms[i].banks; + s->dimms[i].rows = s->dimms[i].spd_data[3];// - 12; + s->dimms[i].cols = s->dimms[i].spd_data[4];// - 9; + s->dimms[i].cas_latencies = 0x78; + s->dimms[i].cas_latencies &= s->dimms[i].spd_data[18]; + if (s->dimms[i].cas_latencies == 0) + s->dimms[i].cas_latencies = 7; + s->dimms[i].tAAmin = s->dimms[i].spd_data[26]; + s->dimms[i].tCKmin = s->dimms[i].spd_data[25]; + s->dimms[i].width = (s->dimms[i].spd_data[13] >> 3) - 1; + s->dimms[i].page_size = (s->dimms[i].width+1) * (1 << s->dimms[i].cols); // Bytes + s->dimms[i].tRAS = s->dimms[i].spd_data[30]; + s->dimms[i].tRP = s->dimms[i].spd_data[27]; + s->dimms[i].tRCD = s->dimms[i].spd_data[29]; + s->dimms[i].tWR = s->dimms[i].spd_data[36]; + s->dimms[i].ranks = s->dimms[i].sides; // XXX + s->dt0mode |= (s->dimms[i].spd_data[49] & 0x2) >> 1; + +#if CONFIG_DEBUG_RAM_SETUP + char ubso[2][3] = { {"UB"}, {"SO"} }; +#endif + PRINTK_DEBUG("%s-DIMM %d\n", &ubso[s->dimms[i].type][0], i); + PRINTK_DEBUG(" Sides : %d\n", s->dimms[i].sides); + PRINTK_DEBUG(" Banks : %d\n", s->dimms[i].banks); + PRINTK_DEBUG(" Ranks : %d\n", s->dimms[i].ranks); + PRINTK_DEBUG(" Rows : %d\n", s->dimms[i].rows); + PRINTK_DEBUG(" Cols : %d\n", s->dimms[i].cols); + PRINTK_DEBUG(" Page size : %d\n", s->dimms[i].page_size); + PRINTK_DEBUG(" Width : %d\n", (s->dimms[i].width+1)*8); + fail = 0; + } + + if (fail) { + die("No memory dimms, halt\n"); + } + + // Ram Config: DIMMB-DIMMA + // 0 EMPTY-EMPTY + // 1 EMPTY-x16SS + // 2 EMPTY-x16DS + // 3 x16SS-x16SS + // 4 x16DS-x16DS + // 5 EMPTY- x8DS + // 6 x8DS - x8DS + + FOR_EACH_POPULATED_CHANNEL(s->dimms, chan) { + if (s->dimms[chan>>1].sides == 0) { + // NC + if (s->dimms[(chan>>1) + 1].sides == 0) { + // NC/NC + s->dimm_config[chan] = 0; + } else if (s->dimms[(chan>>1) + 1].sides == 1) { + // NC/SS + if (s->dimms[(chan>>1) + 1].width == 0) { + // NC/8SS + s->dimm_config[chan] = 1; + } else { + // NC/16SS + s->dimm_config[chan] = 1; + } + } else { + // NC/DS + if (s->dimms[(chan>>1) + 1].width == 0) { + // NC/8DS + s->dimm_config[chan] = 5; + } else { + // NC/16DS + s->dimm_config[chan] = 2; + } + } + } else if (s->dimms[chan>>1].sides == 1) { + // SS + if (s->dimms[(chan>>1) + 1].sides == 0) { + // SS/NC + if (s->dimms[chan>>1].width == 0) { + // 8SS/NC + s->dimm_config[chan] = 1; + swap = 1; + } else { + // 16SS/NC + s->dimm_config[chan] = 1; + swap = 1; + } + } else if (s->dimms[(chan>>1) + 1].sides == 1) { + // SS/SS + if (s->dimms[chan>>1].width == 0) { + if (s->dimms[(chan>>1) + 1].width == 0) { + // 8SS/8SS + s->dimm_config[chan] = 3; + } else { + // 8SS/16SS + die("Mixed Not supported\n"); + } + } else { + if (s->dimms[(chan>>1) + 1].width == 0) { + // 16SS/8SS + die("Mixed Not supported\n"); + } else { + // 16SS/16SS + s->dimm_config[chan] = 3; + } + } + } else { + // SS/DS + if (s->dimms[chan>>1].width == 0) { + if (s->dimms[(chan>>1) + 1].width == 0) { + // 8SS/8DS + die("Mixed Not supported\n"); + } else { + die("Mixed Not supported\n"); + } + } else { + if (s->dimms[(chan>>1) + 1].width == 0) { + // 16SS/8DS + die("Mixed Not supported\n"); + } else { + die("Mixed Not supported\n"); + } + } + } + } else { + // DS + if (s->dimms[(chan>>1) + 1].sides == 0) { + // DS/NC + if (s->dimms[chan>>1].width == 0) { + // 8DS/NC + s->dimm_config[chan] = 5; + swap = 1; + } else { + s->dimm_config[chan] = 4; + swap = 1; + } + } else if (s->dimms[(chan>>1) + 1].sides == 1) { + // DS/SS + if (s->dimms[chan>>1].width == 0) { + if (s->dimms[(chan>>1) + 1].width == 0) { + // 8DS/8SS + die("Mixed Not supported\n"); + } else { + // 8DS/16SS + die("Mixed Not supported\n"); + } + } else { + if (s->dimms[(chan>>1) + 1].width == 0) { + die("Mixed Not supported\n"); + } else { + // 16DS/16DS + s->dimm_config[chan] = 4; + } + } + } else { + // DS/DS + if (s->dimms[chan>>1].width == 0 && s->dimms[(chan>>1)+1].width == 0) { + // 8DS/8DS + s->dimm_config[chan] = 6; + } + } + } + PRINTK_DEBUG(" Config[CH%d] : %d\n", chan, s->dimm_config[chan]); + } +/* + if (swap) { + // Swap dimm info on ch 0 + dimminfo_t tmp; + memcpy(&tmp, &s->dimms[0], sizeof(dimminfo_t)); + memcpy(&s->dimms[0], &s->dimms[1], sizeof(dimminfo_t)); + memcpy(&s->dimms[1], &tmp, sizeof(dimminfo_t)); + } +*/ +} + +#if CONFIG_DEBUG_RAM_SETUP +static u32 fsb2mhz(u32 speed) +{ + return (speed * 133) + 667; +} + +static u32 ddr2mhz(u32 speed) +{ + u32 mhz; + mhz = (speed == 0) ? 667 : + (speed == 1) ? 800 : + 0; + return mhz; +} +#endif + +static u8 lsbpos(u8 val) //Forward +{ + u8 i; + for (i = 0; (i < 8) && ((val & (1 << i)) == 0); i++); + return i; +} + +static u8 msbpos(u8 val) //Reverse +{ + u8 i; + for (i = 7; (i >= 0) && ((val & (1 << i)) == 0); i--); + return i; +} + +static void sdram_detect_smallest_params(struct sys_info *s) +{ + u16 mult[6] = { + 3000, // 667 + 2500, // 800 + }; + + u8 i; + u32 tmp; + u32 maxtras = 0; + u32 maxtrp = 0; + u32 maxtrcd = 0; + u32 maxtwr = 0; + u32 maxtrfc = 0; + u32 maxtwtr = 0; + u32 maxtrrd = 0; + u32 maxtrtp = 0; + + FOR_EACH_POPULATED_DIMM(s->dimms, i) { + maxtras = max(maxtras, s->dimms[i].spd_data[30] * 1000); + maxtrp = max(maxtrp, (s->dimms[i].spd_data[27] * 1000) >> 2); + maxtrcd = max(maxtrcd, (s->dimms[i].spd_data[29] * 1000) >> 2); + maxtwr = max(maxtwr, (s->dimms[i].spd_data[36] * 1000) >> 2); + maxtrfc = max(maxtrfc, s->dimms[i].spd_data[42] * 1000 + + (s->dimms[i].spd_data[40] & 0xf)); + maxtwtr = max(maxtwtr, (s->dimms[i].spd_data[37] * 1000) >> 2); + maxtrrd = max(maxtrrd, (s->dimms[i].spd_data[28] * 1000) >> 2); + maxtrtp = max(maxtrtp, (s->dimms[i].spd_data[38] * 1000) >> 2); + } + for (i = 9; i < 24; i++) { // 16 + tmp = mult[s->selected_timings.mem_clock] * i; + if (tmp >= maxtras) { + s->selected_timings.tRAS = i; + break; + } + } + for (i = 3; i < 10; i++) { + tmp = mult[s->selected_timings.mem_clock] * i; + if (tmp >= maxtrp) { + s->selected_timings.tRP = i; + break; + } + } + for (i = 3; i < 10; i++) { + tmp = mult[s->selected_timings.mem_clock] * i; + if (tmp >= maxtrcd) { + s->selected_timings.tRCD = i; + break; + } + } + for (i = 3; i < 15; i++) { + tmp = mult[s->selected_timings.mem_clock] * i; + if (tmp >= maxtwr) { + s->selected_timings.tWR = i; + break; + } + } + for (i = 15; i < 78; i++) { + tmp = mult[s->selected_timings.mem_clock] * i; + if (tmp >= maxtrfc) { + s->selected_timings.tRFC = ((i + 16) & 0xfe) - 15; + break; + } + } + for (i = 4; i < 15; i++) { + tmp = mult[s->selected_timings.mem_clock] * i; + if (tmp >= maxtwtr) { + s->selected_timings.tWTR = i; + break; + } + } + for (i = 2; i < 15; i++) { + tmp = mult[s->selected_timings.mem_clock] * i; + if (tmp >= maxtrrd) { + s->selected_timings.tRRD = i; + break; + } + } + for (i = 4; i < 15; i++) { + tmp = mult[s->selected_timings.mem_clock] * i; + if (tmp >= maxtrtp) { + s->selected_timings.tRTP = i; + break; + } + } + + PRINTK_DEBUG("Selected timings:\n"); + PRINTK_DEBUG(" FSB: %dMHz\n", fsb2mhz(s->selected_timings.fsb_clock)); + PRINTK_DEBUG(" DDR: %dMHz\n", ddr2mhz(s->selected_timings.mem_clock)); + + PRINTK_DEBUG(" CAS: %d\n", s->selected_timings.CAS); + PRINTK_DEBUG(" tRAS: %d\n", s->selected_timings.tRAS); + PRINTK_DEBUG(" tRP: %d\n", s->selected_timings.tRP); + PRINTK_DEBUG(" tRCD: %d\n", s->selected_timings.tRCD); + PRINTK_DEBUG(" tWR: %d\n", s->selected_timings.tWR); + PRINTK_DEBUG(" tRFC: %d\n", s->selected_timings.tRFC); + PRINTK_DEBUG(" tWTR: %d\n", s->selected_timings.tWTR); + PRINTK_DEBUG(" tRRD: %d\n", s->selected_timings.tRRD); + PRINTK_DEBUG(" tRTP: %d\n", s->selected_timings.tRTP); +} + +static void sdram_detect_ram_speed(struct sys_info *s) +{ + u8 cas, reg8; + u32 reg32; + u32 freq = 0; + u32 fsb = 0; + u8 i; + u8 commoncas = 0; + u8 highcas = 0; + u8 lowcas = 0; + + // Core frequency + fsb = (pci_read_config8(PCI_DEV(0,0,0), 0xe3) & 0x70) >> 4; + if (fsb) { + fsb = 5 - fsb; + } else { + fsb = FSB_CLOCK_800MHz; + } + + // DDR frequency + freq = (pci_read_config8(PCI_DEV(0,0,0), 0xe3) & 0x80) >> 7; + freq |= (pci_read_config8(PCI_DEV(0,0,0), 0xe4) & 0x3) << 1; + if (freq) { + freq = 6 - freq; + } else { + freq = MEM_CLOCK_800MHz; + } + + // Detect a common CAS latency + commoncas = 0xff; + FOR_EACH_POPULATED_DIMM(s->dimms, i) { + commoncas &= s->dimms[i].spd_data[18]; + } + if (commoncas == 0) { + die("No common CAS among dimms\n"); + } + + // Start with fastest common CAS + cas = 0; + highcas = msbpos(commoncas); + lowcas = max(lsbpos(commoncas), 5); + + while (cas == 0 && highcas >= lowcas) { + FOR_EACH_POPULATED_DIMM(s->dimms, i) { + switch (freq) { + case MEM_CLOCK_800MHz: + if ((s->dimms[i].spd_data[9] > 0x25) || + (s->dimms[i].spd_data[10] > 0x40)) { + // CAS too fast, lower it + highcas--; + break; + } else { + cas = highcas; + } + break; + case MEM_CLOCK_667MHz: + default: + if ((s->dimms[i].spd_data[9] > 0x30) || + (s->dimms[i].spd_data[10] > 0x45)) { + // CAS too fast, lower it + highcas--; + break; + } else { + cas = highcas; + } + break; + } + } + } + if (highcas < lowcas) { + // Timings not supported by MCH, lower the frequency + if(freq == MEM_CLOCK_800MHz) { + freq--; + PRINTK_DEBUG("Run DDR clock speed reduced due to timings\n"); + } else { + die("Timings not supported by MCH\n"); + } + cas = 0; + highcas = msbpos(commoncas); + lowcas = lsbpos(commoncas); + while (cas == 0 && highcas >= lowcas) { + FOR_EACH_POPULATED_DIMM(s->dimms, i) { + switch (freq) { + case MEM_CLOCK_800MHz: + if ((s->dimms[i].spd_data[9] > 0x25) || + (s->dimms[i].spd_data[10] > 0x40)) { + // CAS too fast, lower it + highcas--; + break; + } else { + cas = highcas; + } + break; + case MEM_CLOCK_667MHz: + default: + if ((s->dimms[i].spd_data[9] > 0x30) || + (s->dimms[i].spd_data[10] > 0x45)) { + // CAS too fast, lower it + highcas--; + break; + } else { + cas = highcas; + } + break; + } + } + } + if (cas == 0) { + die("Unsupported dimms\n"); + } + } + + s->selected_timings.CAS = cas; + s->selected_timings.mem_clock = freq; + s->selected_timings.fsb_clock = fsb; + + PRINTK_DEBUG("Drive Memory at %dMHz with CAS = %d clocks\n", ddr2mhz(s->selected_timings.mem_clock), s->selected_timings.CAS); + + // Set memory frequency + MCHBAR32(0xf14) = MCHBAR32(0xf14) | 0x1; + reg32 = (MCHBAR32(0xc00) & (~0x70)) | (1 << 10); + if (s->selected_timings.mem_clock == MEM_CLOCK_800MHz) { + reg8 = 3; + } else { + reg8 = 2; + } + reg32 |= reg8 << 4; + MCHBAR32(0xc00) = reg32; + s->selected_timings.mem_clock = ((MCHBAR32(0xc00) >> 4) & 0x7) - 2; + if (s->selected_timings.mem_clock == MEM_CLOCK_800MHz) { + PRINTK_DEBUG("MCH validated at 800MHz\n"); + s->nodll = 0; + s->maxpi = 63; + s->pioffset = 0; + } else if (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) { + PRINTK_DEBUG("MCH validated at 667MHz\n"); + s->nodll = 1; + s->maxpi = 15; + s->pioffset = 1; + } else { + PRINTK_DEBUG("MCH set to unknown (%02x)\n", + (uint8_t) s->selected_timings.mem_clock & 0xff); + } +} + +#define HPET_BASE 0xfed00000 +#define HPET32(x) *((volatile u32 *)(HPET_BASE + x)) +#if 1 +static void enable_hpet(void) +{ + u32 reg32; + reg32 = RCBA32(0x3404); + reg32 &= ~0x3; + reg32 |= (1 << 7); + RCBA32(0x3404) = reg32; + HPET32(0x10) = HPET32(0x10) | 1; +} +#endif + +static void sdram_clk_crossing(sysinfo_t *s) +{ + u8 i, j; + u32 clkcross[2][2][4] = { + { + {0xFFFFFFFF, 0x05030305, 0x0000FFFF, 0x00000000}, //667 667 + {0x1F1F1F1F, 0x2A1F1FA5, 0x00000000, 0x05000002}, //667 800 + }, + { + {0x1F1F1F1F, 0x0D07070B, 0x00000000, 0x00000000}, //800 667 + {0xFFFFFFFF, 0x05030305, 0x0000FFFF, 0x00000000}, //800 800 + } + }; + i = s->selected_timings.mem_clock; + j = s->selected_timings.fsb_clock; + + MCHBAR32(0xc04) = clkcross[j][i][0]; + MCHBAR32(0xc50) = clkcross[j][i][1]; + MCHBAR32(0xc54) = clkcross[j][i][2]; + MCHBAR32(0xc28) = 0; + MCHBAR32(0xc2c) = clkcross[j][i][3]; + MCHBAR32(0xc08) = MCHBAR32(0xc08) | (1 << 7); + + if ((j == 0) && (i == 1)) { + MCHBAR8(0x6d4) = 0; + MCHBAR32(0x700) = 0; + MCHBAR32(0x704) = 0; + } + + u32 clkcross2[2][2][8] = { + { + { 0, 0x08010204, 0, 0x08010204, 0, 0, 0, 0x04080102}, // 667 667 + { 0x04080000, 0x10010002, 0x10000000, 0x20010208, 0, 0x00000004, 0x02040000, 0x08100102}, // 667 800 + }, + { + { 0x10000000, 0x20010208, 0x04080000, 0x10010002, 0, 0, 0x08000000, 0x10200204}, // 800 667 + { 0x00000000, 0x08010204, 0, 0x08010204, 0, 0, 0, 0x04080102}, // 800 800 + } + }; + + MCHBAR32(0x6d8) = clkcross2[j][i][0]; + MCHBAR32(0x6e0) = clkcross2[j][i][0]; + MCHBAR32(0x6e8) = clkcross2[j][i][0]; + MCHBAR32(0x6d8+4) = clkcross2[j][i][1]; + MCHBAR32(0x6e0+4) = clkcross2[j][i][1]; + MCHBAR32(0x6e8+4) = clkcross2[j][i][1]; + MCHBAR32(0x6f0) = clkcross2[j][i][2]; + MCHBAR32(0x6f4) = clkcross2[j][i][3]; + MCHBAR32(0x6f8) = clkcross2[j][i][4]; + MCHBAR32(0x6fc) = clkcross2[j][i][5]; + MCHBAR32(0x708) = clkcross2[j][i][6]; + MCHBAR32(0x70c) = clkcross2[j][i][7]; +} + +static void sdram_clkmode(struct sys_info *s) +{ + u8 reg8; + u16 reg16; + + MCHBAR16(0x1b6) = MCHBAR16(0x1b6) & ~(1 << 8); + MCHBAR8(0x1b6) = MCHBAR8(0x1b6) & ~0x3f; + + if (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) { + reg8 = 0; + reg16 = 1; + } else { + reg8 = 1; + reg16 = (1 << 8) | (1 << 5); + } + MCHBAR16(0x1c0) = (MCHBAR16(0x1c0) & ~(0x033f)) | reg16; + + MCHBAR32(0x220) = 0x58001117; + MCHBAR32(0x248) = (MCHBAR32(0x248) | (1 << 23)); + + const u32 table1[2][4] = { + {0x00000000, 0x00030100, 0x0C240201, 0x00000000}, // 667 + {0x00000000, 0x00030100, 0x0C240201, 0x10450302} // 800 + }; + + MCHBAR32(0x224) = table1[reg8][s->selected_timings.CAS - 3]; +} + +static void sdram_timings(struct sys_info *s) +{ + u8 i, j, ch, r, ta1, ta2, ta3, ta4, trp, bank, page, flag; + u8 reg8, wl; + u16 reg16; + u32 reg32, reg2; + u8 pagetab[2][2] = {{0xe, 0x12}, {0x10, 0x14}}; + + // Only consider DDR2 + wl = s->selected_timings.CAS - 1; + ta1 = ta2 = 6; + ta3 = s->selected_timings.CAS; + ta4 = 8; + s->selected_timings.tRFC = (s->selected_timings.tRFC + 1) & 0xfe; + trp = 0; + bank = 1; + page = 0; + + MCHBAR8(0x240) = ((wl - 3) << 4) | (s->selected_timings.CAS - 3); + + FOR_EACH_POPULATED_RANK(s->dimms, ch, r) { + i = ch << 1; + if (s->dimms[i].banks == 1) { + trp = 1; + bank = 0; + } + if (s->dimms[i].page_size == 2048) { + page = 1; + } + } + PRINTK_DEBUG("trp=%d bank=%d page=%d\n",trp, bank, page); + + if (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) { + flag = 0; + } else { + flag = 1; + } + + MCHBAR8(0x26f) = MCHBAR8(0x26f) | 0x3; + MCHBAR16(0x250) = ((wl + 4 + s->selected_timings.tWR) << 6) | + ((2 + MAX(s->selected_timings.tRTP, 2)) << 2) | 1; + reg32 = (bank << 21) | (s->selected_timings.tRRD << 17) | + (s->selected_timings.tRP << 13) | + ((s->selected_timings.tRP + trp) << 9) | + s->selected_timings.tRFC; + if (bank == 0) { + reg32 |= (pagetab[flag][page] << 22); + } + MCHBAR16(0x252) = (u16) reg32; + MCHBAR16(0x254) = (u16) (reg32 >> 16); + + reg16 = (MCHBAR16(0x254) & 0xfc0) >> 6; + MCHBAR16(0x62c) = (MCHBAR16(0x62c) & ~0x1f80) | (reg16 << 7); + + reg16 = (s->selected_timings.tRCD << 12) | (4 << 8) | (ta2 << 4) | ta4; + MCHBAR16(0x256) = reg16; + + reg32 = (s->selected_timings.tRCD << 17) | + ((wl + 4 + s->selected_timings.tWTR) << 12) | + (ta3 << 8) | (4 << 4) | ta1; + MCHBAR32(0x258) = reg32; + + reg16 = ((s->selected_timings.tRP + trp) << 9) | + s->selected_timings.tRFC; + MCHBAR8(0x25b) = (u8) reg16; + MCHBAR8(0x25c) = (u8) (reg16 >> 8); + + MCHBAR16(0x260) = (MCHBAR16(0x260) & ~0x3fe) | (100 << 1); + MCHBAR8(0x25d) = (MCHBAR8(0x25d) & ~0x3f) | s->selected_timings.tRAS; + MCHBAR16(0x244) = 0x2310; + + MCHBAR8(0x246) = (MCHBAR8(0x246) & ~0x1f) | 1; + + if (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) { + reg32 = 3000; + } else { + reg32 = 2500; + } + if (s->selected_timings.fsb_clock == FSB_CLOCK_667MHz) { + reg2 = 6000; + } else { + reg2 = 5000; + } + reg16 = (u16)((((s->selected_timings.CAS + 7)*(reg32)) / reg2) << 8); + MCHBAR16(0x248) = (MCHBAR16(0x248) & ~0x1f00) | reg16; + + flag = 0; + if (wl > 2) { + flag = 1; + } + reg16 = (u8) (wl - 1 - flag); + reg16 |= reg16 << 4; + reg16 |= flag << 8; + MCHBAR16(0x24d) = (MCHBAR16(0x24d) & ~0x1ff) | reg16; + + MCHBAR16(0x25e) = 0x1585; + MCHBAR8(0x265) = MCHBAR8(0x265) & ~0x1f; + MCHBAR16(0x265) = (MCHBAR16(0x265) & ~0x3f00) | + ((s->selected_timings.CAS + 9) << 8); + + if (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) { + reg16 = 0x514; + reg32 = 0xa28; + } else { + reg16 = 0x618; + reg32 = 0xc30; + } + MCHBAR32(0x268) = (MCHBAR32(0x268) & ~0xfffff00) | + (0x3f << 22) | (reg32 << 8); + MCHBAR8(0x26c) = 0x00; + MCHBAR16(0x2b8) = (MCHBAR16(0x2b8) & 0xc000) | reg16; + MCHBAR8(0x274) = MCHBAR8(0x274) | 1; + + MCHBAR32(0x248) = (MCHBAR32(0x248) & ~0x7f000000) | (0xb << 25); + i = s->selected_timings.mem_clock; + j = s->selected_timings.fsb_clock; + if (i > j) { + MCHBAR32(0x248) = MCHBAR32(0x248) | (1 << 24); + } + + MCHBAR8(0x24c) = MCHBAR8(0x24c) & ~0x3; + MCHBAR16(0x24d) = (MCHBAR16(0x24d) & ~0x7c00) | ((wl + 10) << 10); + MCHBAR32(0x260) = (MCHBAR32(0x260) & ~0x70e0000) | (3 << 24) | (3 << 17); + reg16 = 0x15 << 6; + reg16 |= 0x1f; + reg16 |= (0x6 << 12); + MCHBAR16(0x26d) = (MCHBAR16(0x26d) & ~0x7fff) | reg16; + + reg32 = (0x6 << 27) | (1 << 25); + MCHBAR32(0x268) = (MCHBAR32(0x268) & ~0x30000000) | ((u32)(reg32 << 8)); + MCHBAR8(0x26c) = (MCHBAR8(0x26c) & ~0xfa) | ((u8)(reg32 >> 24)); + MCHBAR8(0x271) = MCHBAR8(0x271) & ~(1 << 7); + MCHBAR8(0x274) = MCHBAR8(0x274) & ~0x6; + reg32 = (u32) ((6 << 30) | (4 << 25) | (1 << 20) | (8 << 15) | + (6 << 10) | (4 << 5) | 1); + MCHBAR32(0x278) = reg32; + + MCHBAR16(0x27c) = (MCHBAR16(0x27c) & ~0x1ff) | (8 << 3) | (6 >> 2); + MCHBAR16(0x125) = MCHBAR16(0x125) | 0x1c00 | (0x1f << 5); + MCHBAR8(0x127) = (MCHBAR8(0x127) & ~0xff) | 0x40; + MCHBAR8(0x128) = (MCHBAR8(0x128) & ~0x7) | 0x5; + MCHBAR8(0x129) = MCHBAR8(0x129) | 0x1f; + reg8 = 3 << 6; + reg8 |= (s->dt0mode << 4); + reg8 |= 0x0c; + MCHBAR8(0x12f) = (MCHBAR8(0x12f) & ~0xdf) | reg8; + MCHBAR8(0x18c) = MCHBAR8(0x18c) & ~0x2; + MCHBAR8(0x228) = (MCHBAR8(0x228) & ~0x7) | 0x2; + MCHBAR16(0x241) = (MCHBAR16(0x241) & ~0x3fc) | (4 << 2); + reg32 = (2 << 29) | (1 << 28) | (1 << 23); + MCHBAR32(0x120) = (MCHBAR32(0x120) & ~0xffb00000) | reg32; + + reg8 = (u8) ((MCHBAR16(0x252) & 0xe000) >> 13); + reg8 |= (u8) ((MCHBAR16(0x254) & 1) << 3); + MCHBAR8(0x12d) = (MCHBAR8(0x12d) & ~0xf0) | (reg8 << 4); + reg8 = (u8) ((MCHBAR32(0x258) & 0xf0000) >> 17); + MCHBAR8(0x12d) = (MCHBAR8(0x12d) & ~0xf) | reg8; + MCHBAR8(0x12e) = MCHBAR8(0x12e) & ~0xfc; + MCHBAR8(0x12e) = MCHBAR8(0x12e) & ~0x3; + MCHBAR8(0x12f) = MCHBAR8(0x12f) & ~0x3; + MCHBAR8(0x241) = MCHBAR8(0x241) | 1; + MCHBAR16(0x1b6) = MCHBAR16(0x1b6) | (1 << 9); + for (i = 0; i < 8; i++) { + MCHBAR32(0x540 + i*4) = (MCHBAR32(0x540 + i*4) & ~0x3f3f3f3f) | + 0x0c0c0c0c; + } + MCHBAR32(0x248) = (MCHBAR32(0x248) & ~0xf0000) | + ((s->selected_timings.CAS + 1) << 16); + for (i = 0; i < 8; i++) { + MCHBAR8(0x560 + i*4) = MCHBAR8(0x560 + i*4) & ~0x3f; + MCHBAR16(0x58c) = MCHBAR16(0x58c) & ((u16) (~(3 << (i*2)))); + MCHBAR16(0x588) = MCHBAR16(0x588) & ((u16) (~(3 << (i*2)))); + MCHBAR16(0x5fa) = MCHBAR16(0x5fa) & ((u16) (~(3 << (i*2)))); + } + MCHBAR8(0x5f0) = MCHBAR8(0x5f0) & ~0x1; + MCHBAR8(0x5f0) = MCHBAR8(0x5f0) | 0x2; + MCHBAR8(0x5f0) = MCHBAR8(0x5f0) | 0x4; + MCHBAR32(0x2c0) = MCHBAR32(0x2c0) | 0xc0400; + MCHBAR32(0x594) = MCHBAR32(0x594) | (1 << 31); +} + +static void sdram_p_clkset0(struct pllparam *pll, u8 f, u8 i) +{ + MCHBAR16(0x5a0) = (MCHBAR16(0x5a0) & ~0xc440) | + (pll->clkdelay[f][i] << 14) | + (pll->dben[f][i] << 10) | + (pll->dbsel[f][i] << 6); + MCHBAR8(0x581) = (MCHBAR8(0x581) & ~0x3f) | pll->pi[f][i]; +} + +static void sdram_p_clkset1(struct pllparam *pll, u8 f, u8 i) +{ + MCHBAR16(0x5a0) = (MCHBAR16(0x5a0) & ~0x30880) | + (pll->clkdelay[f][i] << 16) | + (pll->dben[f][i] << 11) | + (pll->dbsel[f][i] << 7); + MCHBAR8(0x582) = (MCHBAR8(0x582) & ~0x3f) | pll->pi[f][i]; +} + +static void sdram_p_cmd(struct pllparam *pll, u8 f, u8 i) +{ + u8 reg8; + reg8 = pll->dbsel[f][i] << 5; + reg8 |= pll->dben[f][i] << 6; + MCHBAR8(0x594) = (MCHBAR8(0x594) & ~0x60) | reg8; + + reg8 = pll->clkdelay[f][i] << 4; + MCHBAR8(0x598) = (MCHBAR8(0x598) & ~0x30) | reg8; + + reg8 = pll->pi[f][i]; + MCHBAR8(0x580) = (MCHBAR8(0x580) & ~0x3f) | reg8; + MCHBAR8(0x583) = (MCHBAR8(0x583) & ~0x3f) | reg8; +} + +static void sdram_p_ctrl(struct pllparam *pll, u8 f, u8 i) +{ + u8 reg8; + u32 reg32; + reg32 = ((u32) pll->dbsel[f][i]) << 20; + reg32 |= ((u32) pll->dben[f][i]) << 21; + reg32 |= ((u32) pll->dbsel[f][i]) << 22; + reg32 |= ((u32) pll->dben[f][i]) << 23; + reg32 |= ((u32) pll->clkdelay[f][i]) << 24; + reg32 |= ((u32) pll->clkdelay[f][i]) << 27; + MCHBAR32(0x59c) = (MCHBAR32(0x59c) & ~0x1bf0000) | reg32; + + reg8 = pll->pi[f][i]; + MCHBAR8(0x584) = (MCHBAR8(0x584) & ~0x3f) | reg8; + MCHBAR8(0x585) = (MCHBAR8(0x585) & ~0x3f) | reg8; + + reg32 = ((u32) pll->dbsel[f][i]) << 12; + reg32 |= ((u32) pll->dben[f][i]) << 13; + reg32 |= ((u32) pll->dbsel[f][i]) << 8; + reg32 |= ((u32) pll->dben[f][i]) << 9; + reg32 |= ((u32) pll->clkdelay[f][i]) << 14; + reg32 |= ((u32) pll->clkdelay[f][i]) << 10; + MCHBAR32(0x598) = (MCHBAR32(0x598) & ~0xff00) | reg32; + + reg8 = pll->pi[f][i]; + MCHBAR8(0x586) = (MCHBAR8(0x586) & ~0x3f) | reg8; + MCHBAR8(0x587) = (MCHBAR8(0x587) & ~0x3f) | reg8; +} + +static void sdram_p_dqs(struct pllparam *pll, u8 f, u8 clk) +{ + u8 rank, dqs, reg8, j; + u32 reg32; + + j = clk - 40; + reg8 = 0; + reg32 = 0; + rank = j % 4; + dqs = j / 4; + + reg32 |= ((u32) pll->dben[f][clk]) << (dqs + 9); + reg32 |= ((u32) pll->dbsel[f][clk]) << dqs; + MCHBAR32(0x5b4+rank*4) = (MCHBAR32(0x5b4+rank*4) & + ~( (1 << (dqs+9))|(1 << dqs) )) | reg32; + + reg32 = ((u32) pll->clkdelay[f][clk]) << ((dqs*2) + 16); + MCHBAR32(0x5c8+rank*4) = (MCHBAR32(0x5c8+rank*4) & + ~( (1 << (dqs*2 + 17))|(1 << (dqs*2 + 16)) )) | reg32; + + reg8 = pll->pi[f][clk]; + MCHBAR8(0x520+j) = (MCHBAR8(0x520+j) & ~0x3f) | reg8; +} + + +static void sdram_p_dq(struct pllparam *pll, u8 f, u8 clk) +{ + u8 rank, dq, reg8, j; + u32 reg32; + + j = clk - 8; + reg8 = 0; + reg32 = 0; + rank = j % 4; + dq = j / 4; + + reg32 |= ((u32) pll->dben[f][clk]) << (dq + 9); + reg32 |= ((u32) pll->dbsel[f][clk]) << dq; + MCHBAR32(0x5a4+rank*4) = (MCHBAR32(0x5a4+rank*4) & + ~( (1 << (dq+9))|(1 << dq) )) | reg32; + + reg32 = ((u32) pll->clkdelay[f][clk]) << (dq*2); + MCHBAR32(0x5c8+rank*4) = (MCHBAR32(0x5c8+rank*4) & + ~( (1 << (dq*2 + 1))|(1 << (dq*2)) )) | reg32; + + reg8 = pll->pi[f][clk]; + MCHBAR8(0x500+j) = (MCHBAR8(0x500+j) & ~0x3f) | reg8; +} + +static void sdram_calibratepll(struct sys_info *s, u8 pidelay) +{ + struct pllparam pll = { + .pi = { + { // 667 + 3, 3, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, + 7, 7, 7, 7, 3, 3, 3, 3, 3, 3, 3, 3, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 1, 1, 1, 1, 3, 3, 3, 3 + }, + { // 800 + 53, 53, 10, 10, 5, 5, 5, 5, 27, 27, 27, 27, + 34, 34, 34, 34, 34, 34, 34, 34, 39, 39, 39, 39, + 47, 47, 47, 47, 44, 44, 44, 44, 47, 47, 47, 47, + 47, 47, 47, 47, 59, 59, 59, 59, 2, 2, 2, 2, + 2, 2, 2, 2, 7, 7, 7, 7, 15, 15, 15, 15, + 12, 12, 12, 12, 15, 15, 15, 15, 15, 15, 15, 15 + }}, + + .dben = { + { // 667 + 0,0,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0, + 1,1,1,1,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0 + }, + { // 800 + 1,1,1,1,1,1,1,1,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,0,0,0,0, + 1,1,1,1,0,0,0,0,0,0,0,0 + }}, + + .dbsel = { + { // 667 + 0,0,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0, + 1,1,1,1,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0 + }, + { // 800 + 0,0,1,1,1,1,1,1,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,1,1,1,1, + 1,1,1,1,1,1,1,1,0,0,0,0, + 1,1,1,1,0,0,0,0,0,0,0,0 + }}, + + .clkdelay = { + { // 667 + 0,0,1,1,0,0,0,0,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0 + }, + { // 800 + 0,0,0,0,0,0,0,0,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,0,0,0,0,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1 + }} + }; + + u8 i, f; + if (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) { + f = 0; + } else { + f = 1; + } + for (i = 0; i < 72; i++) { + pll.pi[f][i] += pidelay; + } + + MCHBAR8(0x1a4) = MCHBAR8(0x1a4) & ~(1 << 7); + MCHBAR16(0x190) = (MCHBAR16(0x190) & (u16) ~(0x3fff)) | 0x1fff; + + sdram_p_clkset0(&pll, f, 0); + sdram_p_clkset1(&pll, f, 1); + sdram_p_cmd(&pll, f, 2); + sdram_p_ctrl(&pll, f, 4); + for (i = 0; i < 32; i++) { + sdram_p_dqs(&pll, f, i+40); + } + for (i = 0; i < 32; i++) { + sdram_p_dq(&pll, f, i+8); + } +} + +static void sdram_calibratehwpll(struct sys_info *s) +{ + u8 reg8; + + s->async = 0; + reg8 = 0; + MCHBAR16(0x180) = MCHBAR16(0x180) | (1 << 15); + MCHBAR8(0x180) = MCHBAR8(0x180) & ~(1 << 7); + MCHBAR8(0x180) = MCHBAR8(0x180) | (1 << 3); + MCHBAR8(0x180) = MCHBAR8(0x180) | (1 << 2); + + MCHBAR8(0x180) = MCHBAR8(0x180) | (1 << 7); + while ((MCHBAR8(0x180) & (1 << 2)) == 0); + + reg8 = (MCHBAR8(0x180) & (1 << 3)) >> 3; + if (reg8 != 0) { + s->async = 1; + } +} + +static void sdram_dlltiming(struct sys_info *s) +{ + u8 reg8, i, pipost; + u16 reg16; + u32 reg32; + + if (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) { + reg32 = 0x8014227; + } else { + reg32 = 0x14221; + } + MCHBAR32(0x19c) = (MCHBAR32(0x19c) & ~0xfffffff) | reg32; + MCHBAR32(0x19c) = MCHBAR32(0x19c) | (1 << 23); + MCHBAR32(0x19c) = MCHBAR32(0x19c) | (1 << 15); + MCHBAR32(0x19c) = MCHBAR32(0x19c) & ~(1 << 15); + + if (s->nodll) { + MCHBAR16(0x198) = MCHBAR16(0x198) | (1 << 0); + MCHBAR16(0x198) = MCHBAR16(0x198) | (1 << 2); + MCHBAR16(0x198) = MCHBAR16(0x198) | (1 << 4); + MCHBAR16(0x198) = MCHBAR16(0x198) | (1 << 8); + MCHBAR16(0x198) = MCHBAR16(0x198) | (1 << 10); + MCHBAR16(0x198) = MCHBAR16(0x198) | (1 << 12); + MCHBAR16(0x198) = MCHBAR16(0x198) | (1 << 14); + } else { + MCHBAR16(0x198) = MCHBAR16(0x198) & ~(1 << 0); + MCHBAR16(0x198) = MCHBAR16(0x198) & ~(1 << 2); + MCHBAR16(0x198) = MCHBAR16(0x198) & ~(1 << 4); + MCHBAR16(0x198) = MCHBAR16(0x198) & ~(1 << 8); + MCHBAR16(0x198) = MCHBAR16(0x198) & ~(1 << 10); + MCHBAR16(0x198) = MCHBAR16(0x198) & ~(1 << 12); + MCHBAR16(0x198) = MCHBAR16(0x198) & ~(1 << 14); + } + + if (s->nodll) { + MCHBAR8(0x1c8) = (MCHBAR8(0x1c8) & ~0x3f) | 0x7; + } else { + MCHBAR8(0x1c8) = (MCHBAR8(0x1c8) & ~0x3f); + } + + sdram_calibratepll(s, 0); // XXX check + + MCHBAR16(0x5f0) = MCHBAR16(0x5f0) | (1 << 11); + MCHBAR16(0x5f0) = MCHBAR16(0x5f0) | (1 << 12); + + for (i = 0; i < 8; i++) { + MCHBAR16(0x5f0) = MCHBAR16(0x5f0) | ((1 << 10) >> i); + } + MCHBAR8(0x2c14) = MCHBAR8(0x2c14) | 1; + MCHBAR16(0x182) = 0x5005; + MCHBAR16(0x18a) = (MCHBAR16(0x18a) & ~0x1f1f) | 0x51a; + MCHBAR16(0x2c00) = (MCHBAR16(0x2c00) & ~0xbf3f) | 0x9010; + + if (s->nodll) { + MCHBAR8(0x18e) = (MCHBAR8(0x18e) & ~0x7f) | 0x6b; + } else { + MCHBAR8(0x18e) = (MCHBAR8(0x18e) & ~0x7f) | 0x55; + sdram_calibratehwpll(s); + } + pipost = 0x34; + + MCHBAR32(0x248) = MCHBAR32(0x248) & ~(1 << 22); + MCHBAR8(0x5d9) = MCHBAR8(0x5d9) & ~0x2; + MCHBAR8(0x189) = MCHBAR8(0x189) | 0xc0; + MCHBAR8(0x189) = MCHBAR8(0x189) & ~(1 << 5); + MCHBAR8(0x189) = (MCHBAR8(0x189) & ~0xc0) | (1 << 6); + MCHBAR8(0x188) = (MCHBAR8(0x188) & ~0x3f) | 0x1a; + MCHBAR8(0x188) = MCHBAR8(0x188) | 1; + + MCHBAR8(0x1a8) = MCHBAR8(0x1a8) | 1; + MCHBAR32(0x1a0) = 0x551803; + if (ONLY_DIMMA_IS_POPULATED(s->dimms, 0)) { + reg8 = 0x3c; + } else if (ONLY_DIMMB_IS_POPULATED(s->dimms, 0)) { + reg8 = 0x27; + } else if (BOTH_DIMMS_ARE_POPULATED(s->dimms, 0)) { + reg8 = 0x24; + } else { + // None + reg8 = 0x3f; + } + reg8 = 0x00; //switch all clocks on anyway + + MCHBAR32(0x5a0) = (MCHBAR32(0x5a0) & ~0x3f000000) | (reg8 << 24); + MCHBAR8(0x594) = MCHBAR8(0x594) & ~1; + reg16 = 0; + if (!RANK_IS_POPULATED(s->dimms, 0, 0)) { + reg16 |= (1 << 8) | (1 << 4) | (1 << 0); + } + if (!RANK_IS_POPULATED(s->dimms, 0, 1)) { + reg16 |= (1 << 9) | (1 << 5) | (1 << 1); + } + if (!RANK_IS_POPULATED(s->dimms, 0, 2)) { + reg16 |= (1 << 10) | (1 << 6) | (1 << 2); + } + if (!RANK_IS_POPULATED(s->dimms, 0, 3)) { + reg16 |= (1 << 11) | (1 << 7) | (1 << 3); + } + MCHBAR16(0x59c) = MCHBAR16(0x59c) | reg16; +} + +static void sdram_rcomp(struct sys_info *s) +{ + u8 i, j, reg8, f, rcompp, rcompn, srup, srun; + u16 reg16; + u32 reg32, rcomp1, rcomp2; + + u8 rcompupdate[7] = { 0, 0, 0, 1, 1, 0, 0 }; + u8 rcompslew = 0xa; + u8 rcompstr[7] = { 0x66, 0, 0xaa, 0x55, 0x55, 0x77, 0x77 }; + u16 rcompscomp[7] = { 0xa22a, 0, 0xe22e, 0xe22e, 0xe22e, 0xa22a, 0xa22a }; + u8 rcompdelay[7] = { 1, 0, 0, 0, 0, 1, 1 }; + u16 rcompctl[7] = { 0x31c, 0, 0x374, 0x3a2, 0x3d0, 0x3fe, 0x42c }; + u16 rcompf[7] = { 0x1114, 0, 0x0505, 0x0909, 0x0909, 0x0a0a, 0x0a0a }; + + // NC-NC x16SS x16DS x16SS2 x16DS2 x8DS, x8DS2 + u8 rcompstr2[7] = { 0x00, 0x55, 0x55, 0xaa, 0xaa , 0x55, 0xaa}; + u16 rcompscomp2[7] = { 0x0000, 0xe22e, 0xe22e, 0xe22e, 0x8228 , 0xe22e, 0x8228 }; + u8 rcompdelay2[7] = { 0, 0, 0, 0, 2 , 0, 2}; + + u8 rcomplut[64][12] = { + { 9, 9,11,11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 9, 9,11, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 10,9,12, 11, 2, 2, 5,5, 6, 6,5, 5}, + { 10,9,12, 11, 2, 2, 6,5, 7, 6,6, 5}, + { 10,10,12, 12, 2, 2, 6,5, 7, 6,6, 5}, + { 10,10,12, 12, 2, 2, 6,6, 7, 7,6, 6}, + { 10,10,12, 12, 3, 2, 6,6, 7, 7,6, 6}, + { 10,10,12, 12, 3, 2, 6,6, 7, 7,6, 6}, + { 10,10,12, 12, 3, 2, 6,6, 7, 7,6, 6}, + { 10,10,12, 12, 3, 3, 6,6, 7, 7,6, 6}, + { 10,10,12, 12, 3, 3, 6,6, 7, 7,6, 6}, + { 10,10,12, 12, 3, 3, 6,6, 7, 7,6, 6}, + { 10,10,12, 12, 3, 3, 6,6, 7, 7,6, 6}, + { 10,10,12, 12, 3, 3, 6,6, 7, 7,6, 6}, + { 11,10,12, 12, 3, 3, 6,6, 7, 7,6, 6}, + { 11,10,14, 13, 3, 3, 6,6, 7, 7,6, 6}, + { 12,10,14, 13, 3, 3, 6,6, 7, 7,6, 6}, + { 12,12,14, 13, 3, 3, 7,6, 7, 7,7, 6}, + { 13,12,16, 15, 3, 3, 7,6, 8, 7,7, 6}, + { 13,14,16, 15, 4, 3, 7,7, 8, 8,7, 7}, + { 14,14,16, 17, 4, 3, 7,7, 8, 8,7, 7}, + { 14,16,18, 17, 4, 4, 8,7, 8, 8,8, 7}, + { 15,16,18, 19, 4, 4, 8,7, 9, 8,8, 7}, + { 15,18,18, 19, 4, 4, 8,8, 9, 9,8, 8}, + { 16,18,20, 21, 4, 4, 8,8, 9, 9,8, 8}, + { 16,19,20, 21, 5, 4, 9,8, 10, 9,9, 8}, + { 16,19,20, 23, 5, 5, 9,9, 10, 10,9, 9}, + { 17,19,22, 23, 5, 5, 9,9, 10, 10,9, 9}, + { 17,20,22, 25, 5, 5, 9,9, 10, 10,9, 9}, + { 17,20,22, 25, 5, 5, 9,9, 10, 10,9, 9}, + { 18,20,22, 25, 5, 5, 9,9, 10, 10,9, 9}, + { 18,21,24, 25, 5, 5, 9,9, 11, 10,9, 9}, + { 19,21,24, 27, 5, 5, 9, 9, 11, 11,9, 9}, + { 19,22,24, 27, 5, 5, 10,9, 11, 11,10, 9}, + { 20,22,24, 27, 6, 5, 10,10, 11, 11,10, 10}, + { 20,23,26, 27, 6, 6, 10,10, 12, 12,10, 10}, + { 20,23,26, 29, 6, 6, 10,10, 12, 12,10, 10}, + { 21,24,26, 29, 6, 6, 10,10, 12, 12,10, 10}, + { 21,24,26, 29, 6, 6, 11,10, 12, 13,11, 10}, + { 22,25,28, 29, 6, 6, 11,11, 13, 13,11, 11}, + { 22,25,28, 31, 6, 6, 11,11, 13, 13,11, 11}, + { 22,26,28, 31, 6, 6, 11,11, 13, 14,11, 11}, + { 23,26,30, 31, 7, 6, 12,11, 14, 14,12, 11}, + { 23,27,30, 33, 7, 7, 12,12, 14, 14,12, 12}, + { 23,27,30, 33, 7, 7, 12,12, 14, 15,12, 12}, + { 24,28,32, 33, 7, 7, 12,12, 15, 15,12, 12}, + { 24,28,32, 33, 7, 7, 12,12, 15, 16,12, 12}, + { 24,29,32, 35, 7, 7, 12,12, 15, 16,12, 12}, + { 25,29,32, 35, 7, 7, 12,12, 15, 17,12, 12}, + { 25,30,32, 35, 7, 7, 12,12, 15, 17,12, 12}, + { 25,30,32, 35, 7, 7, 12,12, 15, 17,12, 12}, + }; + + srup = 0; + srun = 0; + + if (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) { + f = 0; + rcomp1 = 0x00050431; + } else { + f = 1; + rcomp1 = 0x00050542; + } + if (s->selected_timings.fsb_clock == FSB_CLOCK_667MHz) { + rcomp2 = 0x14C42827; + } else { + rcomp2 = 0x19042827; + } + + for (i = 0; i < 7; i++) { + if (i == 1) + continue; + reg8 = rcompupdate[i]; + MCHBAR8(rcompctl[i]) = (MCHBAR8(rcompctl[i]) & ~0x1) | reg8; + MCHBAR8(rcompctl[i]) = MCHBAR8(rcompctl[i]) & ~0x2; + reg16 = (u16) rcompslew; + MCHBAR16(rcompctl[i]) = (MCHBAR16(rcompctl[i]) & ~0xf000) | + (reg16 << 12); + MCHBAR8(rcompctl[i]+4) = rcompstr[i]; + MCHBAR16(rcompctl[i]+0xe) = rcompscomp[i]; + MCHBAR8(rcompctl[i]+0x14) = (MCHBAR8(rcompctl[i]+0x14) & ~0x3) | + rcompdelay[i]; + if (i == 2) { + reg16 = (u16) rcompslew; + MCHBAR16(rcompctl[i]) = (MCHBAR16(rcompctl[i]) & + ~0xf000) | (reg16 << 12); + MCHBAR8(rcompctl[i]+4) = rcompstr2[s->dimm_config[0]]; + MCHBAR16(rcompctl[i]+0xe) = rcompscomp2[s->dimm_config[0]]; + MCHBAR8(rcompctl[i]+0x14) = (MCHBAR8(rcompctl[i]+0x14) & + ~0x3) | rcompdelay2[s->dimm_config[0]]; + } + + MCHBAR16(rcompctl[i]+0x16) = MCHBAR16(rcompctl[i]+0x16) & ~0x7f7f; + MCHBAR16(rcompctl[i]+0x18) = MCHBAR16(rcompctl[i]+0x18) & ~0x3f3f; + MCHBAR16(rcompctl[i]+0x1a) = MCHBAR16(rcompctl[i]+0x1a) & ~0x3f3f; + MCHBAR16(rcompctl[i]+0x1c) = MCHBAR16(rcompctl[i]+0x1c) & ~0x3f3f; + MCHBAR16(rcompctl[i]+0x1e) = MCHBAR16(rcompctl[i]+0x1e) & ~0x3f3f; + } + + MCHBAR8(0x45a) = (MCHBAR8(0x45a) & ~0x3f) | 0x36; + MCHBAR8(0x462) = (MCHBAR8(0x462) & ~0x3f) | 0x36; + + for (i = 0; i < 7; i++) { + if (i == 1) + continue; + MCHBAR8(rcompctl[i]) = MCHBAR8(rcompctl[i]) & ~0x60; + MCHBAR16(rcompctl[i]+2) = MCHBAR16(rcompctl[i]+2) & ~0x706; + MCHBAR16(rcompctl[i]+0xa) = MCHBAR16(rcompctl[i]+0xa) & ~0x7f7f; + MCHBAR16(rcompctl[i]+0x12) = MCHBAR16(rcompctl[i]+0x12) & ~0x3f3f; + MCHBAR16(rcompctl[i]+0x24) = MCHBAR16(rcompctl[i]+0x24) & ~0x1f1f; + MCHBAR8(rcompctl[i]+0x26) = MCHBAR8(rcompctl[i]+0x26) & ~0x1f; + } + + MCHBAR16(0x45a) = MCHBAR16(0x45a) & ~0xffc0; + MCHBAR16(0x45c) = MCHBAR16(0x45c) & ~0xf; + MCHBAR16(0x462) = MCHBAR16(0x462) & ~0xffc0; + MCHBAR16(0x464) = MCHBAR16(0x464) & ~0xf; + + for (i = 0; i < 7; i++) { + if (i == 1) + continue; + MCHBAR16(rcompctl[i]+0x10) = rcompf[i]; + MCHBAR16(rcompctl[i]+0x20) = 0x1219; + MCHBAR16(rcompctl[i]+0x22) = 0x000C; + } + + MCHBAR32(0x164) = (MCHBAR32(0x164) & ~0x1f1f1f) | 0x0c1219; + MCHBAR16(0x4b0) = (MCHBAR16(0x4b0) & ~0x1f00) | 0x1200; + MCHBAR8(0x4b0) = (MCHBAR8(0x4b0) & ~0x1f) | 0x12; + MCHBAR32(0x138) = 0x007C9007; + MCHBAR32(0x16c) = rcomp1; + MCHBAR16(0x17a) = 0x1f7f; + MCHBAR32(0x134) = rcomp2; + MCHBAR16(0x170) = (MCHBAR16(0x170) & ~0xf) | 1; + MCHBAR16(0x178) = 0x134; + MCHBAR32(0x130) = 0x4C293600; + MCHBAR8(0x133) = (MCHBAR8(0x133) & ~0x44) | (1 << 6) | (1 << 2); + MCHBAR16(0x4b0) = MCHBAR16(0x4b0) & ~(1 << 13); + MCHBAR8(0x4b0) = MCHBAR8(0x4b0) & ~(1 << 5); + + for (i = 0; i < 7; i++) { + if (i == 1) + continue; + MCHBAR8(rcompctl[i]+2) = MCHBAR8(rcompctl[i]) & ~0x71; + } + + if ((MCHBAR32(0x130) & (1 << 30)) == 0) { + MCHBAR8(0x130) = MCHBAR8(0x130) | 0x1; + while ((MCHBAR8(0x130) & 0x1) != 0); + + reg32 = MCHBAR32(0x13c); + rcompp = (u8) ((reg32 & ~(1 << 31)) >> 24); + rcompn = (u8) ((reg32 & ~(0xff800000)) >> 16); + + for (i = 0; i < 7; i++) { + if (i == 1) + continue; + srup = (MCHBAR8(rcompctl[i]+1) & 0xc0) >> 6; + srun = (MCHBAR8(rcompctl[i]+1) & 0x30) >> 4; + reg16 = (u16)(rcompp - (1 << (srup + 1))) << 8; + MCHBAR16(rcompctl[i]+0x16) = (MCHBAR16(rcompctl[i]+0x16) + & ~0x7f00) | reg16; + reg16 = (u16)(rcompn - (1 << (srun + 1))); + MCHBAR8(rcompctl[i]+0x16) = (MCHBAR8(rcompctl[i]+0x16) & + ~0x7f) | (u8)reg16; + } + + reg8 = rcompp - (1 << (srup + 1)); + for (i = 0, j = reg8; i < 4; i++, j += (1 << srup)) { + MCHBAR8(rcompctl[0]+0x18+i) = + (MCHBAR8(rcompctl[0]+0x18+i) & ~0x3f) | + rcomplut[j][0]; + } + + for (i = 0, j = reg8; i < 4; i++, j += (1 << srup)) { + if (s->dimm_config[0] < 3 || s->dimm_config[0] == 5) { + MCHBAR8(rcompctl[2]+0x18+i) = + (MCHBAR8(rcompctl[2]+0x18+i) & ~0x3f) | + rcomplut[j][10]; + } + } + + for (i = 0, j = reg8; i < 4; i++, j += (1 << srup)) { + MCHBAR8(rcompctl[3]+0x18+i) = + (MCHBAR8(rcompctl[3]+0x18+i) & ~0x3f) | + rcomplut[j][6]; + MCHBAR8(rcompctl[4]+0x18+i) = + (MCHBAR8(rcompctl[4]+0x18+i) & ~0x3f) | + rcomplut[j][6]; + } + + for (i = 0, j = reg8; i < 4; i++, j += (1 << srup)) { + MCHBAR8(rcompctl[5]+0x18+i) = + (MCHBAR8(rcompctl[5]+0x18+i) & ~0x3f) | + rcomplut[j][8]; + MCHBAR8(rcompctl[6]+0x18+i) = + (MCHBAR8(rcompctl[6]+0x18+i) & ~0x3f) | + rcomplut[j][8]; + } + + reg8 = rcompn - (1 << (srun + 1)); + for (i = 0, j = reg8; i < 4; i++, j += (1 << srun)) { + MCHBAR8(rcompctl[0]+0x1c+i) = + (MCHBAR8(rcompctl[0]+0x1c+i) & ~0x3f) | + rcomplut[j][1]; + } + + for (i = 0, j = reg8; i < 4; i++, j += (1 << srun)) { + if (s->dimm_config[0] < 3 || s->dimm_config[0] == 5) { + MCHBAR8(rcompctl[2]+0x1c+i) = + (MCHBAR8(rcompctl[2]+0x1c+i) & ~0x3f) | + rcomplut[j][11]; + } + } + + for (i = 0, j = reg8; i < 4; i++, j += (1 << srun)) { + MCHBAR8(rcompctl[3]+0x1c+i) = + (MCHBAR8(rcompctl[3]+0x1c+i) & ~0x3f) | + rcomplut[j][7]; + MCHBAR8(rcompctl[4]+0x1c+i) = + (MCHBAR8(rcompctl[4]+0x1c+i) & ~0x3f) | + rcomplut[j][7]; + } + + for (i = 0, j = reg8; i < 4; i++, j += (1 << srun)) { + MCHBAR8(rcompctl[5]+0x1c+i) = + (MCHBAR8(rcompctl[5]+0x1c+i) & ~0x3f) | + rcomplut[j][9]; + MCHBAR8(rcompctl[6]+0x1c+i) = + (MCHBAR8(rcompctl[6]+0x1c+i) & ~0x3f) | + rcomplut[j][9]; + } + } + MCHBAR8(0x130) = MCHBAR8(0x130) | 1; +} + +static void sdram_odt(struct sys_info *s) +{ + u8 rankindex = 0; + + u16 odt294[16] = { + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0044, 0x1111, 0x0000, 0x1111, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0044, 0x1111, 0x0000, 0x1111 + }; + u16 odt298[16] = { + 0x0000, 0x0011, 0x0000, 0x0011, + 0x0000, 0x4444, 0x0000, 0x4444, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x4444, 0x0000, 0x4444 + }; + + switch (s->dimms[0].ranks) { + case 0: + if (s->dimms[1].ranks == 0) { + rankindex = 0; + } else if (s->dimms[1].ranks == 1) { + rankindex = 4; + } else if (s->dimms[1].ranks == 2) { + rankindex = 12; + } + break; + case 1: + if (s->dimms[1].ranks == 0) { + rankindex = 1; + } else if (s->dimms[1].ranks == 1) { + rankindex = 5; + } else if (s->dimms[1].ranks == 2) { + rankindex = 13; + } + break; + case 2: + if (s->dimms[1].ranks == 0) { + rankindex = 3; + } else if (s->dimms[1].ranks == 1) { + rankindex = 7; + } else if (s->dimms[1].ranks == 2) { + rankindex = 15; + } + break; + } + + MCHBAR16(0x298) = odt298[rankindex]; + MCHBAR16(0x294) = odt294[rankindex]; +} + +static void sdram_mmap(struct sys_info *s) +{ + u32 w260[7] = {0, 0x400001, 0xc00001, 0x500000, 0xf00000, 0xc00001, 0xf00000}; + u32 w208[7] = {0, 0x10000, 0x1010000, 0x10001, 0x1010101, 0x1010000, 0x1010101}; + u32 w200[7] = {0, 0, 0, 0x20002, 0x40002, 0, 0x40002}; + u32 w204[7] = {0, 0x20002, 0x40002, 0x40004, 0x80006, 0x40002, 0x80006}; + + u16 tolud[7] = {0x800, 0x800, 0x1000, 0x1000, 0x2000, 0x1000, 0x2000}; + u16 tom[7] = {0x2, 0x2, 0x4, 0x4, 0x8, 0x4, 0x8}; + u16 touud[7] = {0x80, 0x80, 0x100, 0x100, 0x200, 0x100, 0x200}; + u32 gbsm[7] = {0x8000000, 0x8000000, 0x10000000, 0x8000000, 0x20000000, 0x10000000, 0x20000000}; + u32 bgsm[7] = {0x8000000, 0x8000000, 0x10000000, 0x8000000, 0x20000000, 0x10000000, 0x20000000}; + u32 tsegmb[7] = {0x8000000, 0x8000000, 0x10000000, 0x8000000, 0x20000000, 0x10000000, 0x20000000}; + + if ((s->dimm_config[0] < 3) && RANK_IS_POPULATED(s->dimms, 0, 0)) { + if (s->dimms[0].sides > 1) { + // 2R/NC + MCHBAR32(0x260) = (MCHBAR32(0x260) & ~0x1) | 0x300001; + MCHBAR32(0x208) = 0x101; + MCHBAR32(0x200) = 0x40002; + MCHBAR32(0x204) = w204[s->dimm_config[0]]; + } else { + // 1R/NC + MCHBAR32(0x260) = (MCHBAR32(0x260) & ~0x1) | 0x100001; + MCHBAR32(0x208) = 0x1; + MCHBAR32(0x200) = 0x20002; + MCHBAR32(0x204) = w204[s->dimm_config[0]]; + } + } else if ((s->dimm_config[0] == 5) && RANK_IS_POPULATED(s->dimms, 0, 0)) { + + MCHBAR32(0x260) = (MCHBAR32(0x260) & ~0x1) | 0x300001; + MCHBAR32(0x208) = 0x101; + MCHBAR32(0x200) = 0x40002; + MCHBAR32(0x204) = 0x40004; + } else { + MCHBAR32(0x260) = (MCHBAR32(0x260) & ~0x1) | w260[s->dimm_config[0]]; + MCHBAR32(0x208) = w208[s->dimm_config[0]]; + MCHBAR32(0x200) = w200[s->dimm_config[0]]; + MCHBAR32(0x204) = w204[s->dimm_config[0]]; + } + pci_write_config16(PCI_DEV(0, 0, 0), 0xb0, tolud[s->dimm_config[0]]); + pci_write_config16(PCI_DEV(0, 0, 0), 0xa0, tom[s->dimm_config[0]]); + pci_write_config16(PCI_DEV(0, 0, 0), 0xa2, touud[s->dimm_config[0]]); + pci_write_config32(PCI_DEV(0, 0, 0), 0xa4, gbsm[s->dimm_config[0]]); + pci_write_config32(PCI_DEV(0, 0, 0), 0xa8, bgsm[s->dimm_config[0]]); + pci_write_config32(PCI_DEV(0, 0, 0), 0xac, tsegmb[s->dimm_config[0]]); +} + +#if 1 +static void hpet_udelay(u32 del) +{ + u32 start, finish, now; + + del *= 15; /* now in usec */ + + start = HPET32(0xf0); + finish = start + del; + while (1) { + now = HPET32(0xf0); + if (finish > start) { + if (now >= finish) + break; + } else { + if ((now < start) && (now >= finish)) { + break; + } + } + } +} +#endif + +static u8 sdram_checkrcompoverride(void) +{ + u32 xcomp; + u8 aa, bb, a, b, c, d; + + xcomp = MCHBAR32(0x13c); + a = (u8)((xcomp & 0x7f000000) >> 24); + b = (u8)((xcomp & 0x7f0000) >> 16); + c = (u8)((xcomp & 0x3f00) >> 8); + d = (u8)(xcomp & 0x3f); + + if (a > b) { + aa = a - b; + } else { + aa = b - a; + } + if (c > d) { + bb = c - d; + } else { + bb = d - c; + } + if ((aa > 18) || (bb > 7) || + (a <= 5) || (b <= 5) || (c <= 5) || (d <= 5) || + (a >= 0x7a) || (b >= 0x7a) || (c >= 0x3a) || (d >= 0x3a)) { + MCHBAR32(0x140) = 0x9718a729; + return 1; + } + return 0; +} + +static void sdram_rcompupdate(struct sys_info *s) +{ + u8 i, ok; + u32 reg32a, reg32b; + + ok = 0; + MCHBAR8(0x170) = MCHBAR8(0x170) & ~(1 << 3); + MCHBAR8(0x130) = MCHBAR8(0x130) & ~(1 << 7); + for (i = 0; i < 3; i++) { + MCHBAR8(0x130) = MCHBAR8(0x130) | 1; + hpet_udelay(1000); + while ((MCHBAR8(0x130) & 0x1) != 0); + ok |= sdram_checkrcompoverride(); + } + if (!ok) { + reg32a = MCHBAR32(0x13c); + reg32b = (reg32a >> 16) & 0x0000ffff; + reg32a = ((reg32a << 16) & 0xffff0000) | reg32b; + reg32a |= (1 << 31) | (1 << 15); + MCHBAR32(0x140) = reg32a; + } + MCHBAR8(0x130) = MCHBAR8(0x130) | 1; + hpet_udelay(1000); + while ((MCHBAR8(0x130) & 0x1) != 0); +} + +static void __attribute__((noinline)) +sdram_jedec(struct sys_info *s, u8 rank, u8 jmode, u16 jval) +{ + u32 reg32; + + reg32 = jval << 3; + reg32 |= rank * 0x8000000; + MCHBAR8(0x271) = (MCHBAR8(0x271) & ~0x3e) | jmode; + read32((void *)reg32); + barrier(); + hpet_udelay(1); // 1us +} + +static void sdram_zqcl(struct sys_info *s) +{ + if (s->boot_path == BOOT_PATH_RESUME) { + MCHBAR32(0x260) = MCHBAR32(0x260) | (1 << 27); + MCHBAR8(0x271) = (MCHBAR8(0x271) & ~0xe) | NORMAL_OP_CMD; + MCHBAR8(0x271) = MCHBAR8(0x271) & ~0x30; + MCHBAR32(0x268) = (MCHBAR32(0x268) & ~((1 << 30) | (1 << 31))) | + (1 << 30) | (1 << 31); + } +} + +static void sdram_jedecinit(struct sys_info *s) +{ + u8 r, i, ch; + u16 reg16, mrs, rttnom; + struct jedeclist { + char debug[15]; + u8 cmd; + u16 val; + }; + + struct jedeclist jedec[12] = { + { " NOP ", NOP_CMD, 0 }, + { " PRE CHARGE ", PRE_CHARGE_CMD, 0 }, + { " EMRS2 ", EMRS2_CMD, 0 }, + { " EMRS3 ", EMRS3_CMD, 0 }, + { " EMRS1 ", EMRS1_CMD, 0 }, + { " DLL RESET ", MRS_CMD, (1 << 8) }, + { " PRE CHARGE ", PRE_CHARGE_CMD, 0 }, + { " AUTOREFRESH", CBR_CMD, 0 }, + { " AUTOREFRESH", CBR_CMD, 0 }, + { " INITIALISE ", MRS_CMD, 0 }, + { " EMRS1 OCD ", EMRS1_CMD, (1 << 9) | (1 << 8) | (1 << 7) }, + { " EMRS1 EXIT ", EMRS1_CMD, 0 } + }; + + mrs = (s->selected_timings.CAS << 4) | + ((s->selected_timings.tWR - 1) << 9) | (1 << 3) | (1 << 1) | 1; + rttnom = (1 << 2); + if (RANK_IS_POPULATED(s->dimms, 0, 0) && RANK_IS_POPULATED(s->dimms, 0, 2)) { + rttnom |= (1 << 6); + } + + hpet_udelay(200); // 200us + reg16 = 0; + FOR_EACH_POPULATED_RANK(s->dimms, ch, r) { + for (i = 0; i < 12; i++) { + PRINTK_DEBUG("Rank:%d Jedec:%14s...", r, jedec[i].debug); + reg16 = jedec[i].val; + switch (jedec[i].cmd) { + case EMRS1_CMD: + reg16 |= rttnom; + break; + case MRS_CMD: + reg16 |= mrs; + break; + default: + break; + } + sdram_jedec(s, r, jedec[i].cmd, reg16); + PRINTK_DEBUG("done\n"); + } + } +} + +static void sdram_misc(struct sys_info *s) +{ + u32 reg32; + + reg32 = 0; + reg32 |= (0x4 << 13); + reg32 |= (0x6 << 8); + MCHBAR32(0x274) = (MCHBAR32(0x274) & ~0x3ff00) | reg32; + MCHBAR8(0x274) = MCHBAR8(0x274) & ~(1 << 7); + MCHBAR8(0x26c) = MCHBAR8(0x26c) | 1; + if (s->boot_path != BOOT_PATH_RESUME) { + MCHBAR8(0x271) = (MCHBAR8(0x271) & ~0xe) | NORMAL_OP_CMD; + MCHBAR8(0x271) = MCHBAR8(0x271) & ~0x30; + } else { + sdram_zqcl(s); + } +} + +static void sdram_checkreset(void) +{ + u8 pmcon2, pmcon3, reset; + + pmcon2 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); + pmcon3 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); + pmcon3 &= ~0x2; + if (pmcon2 & 0x80) { + pmcon2 &= ~0x80; + reset = 1; + } else { + pmcon2 |= 0x80; + reset = 0; + } + if (pmcon2 & 0x4) { + pmcon2 |= 0x4; + pmcon3 = (pmcon3 & ~0x30) | 0x30; + pmcon3 |= (1 << 3); + } + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, pmcon2); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, pmcon3); + if (reset) { + printk(BIOS_DEBUG, "Power cycle reset...\n"); + outb(0xe, 0xcf9); + } +} + +static void sdram_dradrb(struct sys_info *s) +{ + u8 i, reg8, ch, r; + u32 reg32, ind, c0dra, c0drb, dra; + u16 addr; + i = 0; + u8 dratab[2][2][2][4] = + {{ + { + {0xff, 0xff, 0xff, 0xff}, + {0xff, 0x00, 0x02, 0xff} + }, + { + {0xff, 0x01, 0xff, 0xff}, + {0xff, 0x03, 0xff, 0x06} + } + }, + { + { + {0xff, 0xff, 0xff, 0xff}, + {0xff, 0x04, 0x06, 0x08} + }, + { + {0xff, 0xff, 0xff, 0xff}, + {0x05, 0x07, 0x09, 0xff} + } + }}; + + u8 dradrb[10][6] = { + //Row Col Bank Width DRB + {0x01, 0x01, 0x00, 0x08, 0, 0x04}, + {0x01, 0x00, 0x00, 0x10, 0, 0x02}, + {0x02, 0x01, 0x00, 0x08, 1, 0x08}, + {0x01, 0x01, 0x00, 0x10, 1, 0x04}, + {0x01, 0x01, 0x01, 0x08, 1, 0x08}, + {0x00, 0x01, 0x01, 0x10, 1, 0x04}, + {0x02, 0x01, 0x01, 0x08, 2, 0x10}, + {0x01, 0x01, 0x01, 0x10, 2, 0x08}, + {0x03, 0x01, 0x01, 0x08, 3, 0x20}, + {0x02, 0x01, 0x01, 0x10, 3, 0x10}, + }; + + reg32 = 0; + FOR_EACH_POPULATED_RANK(s->dimms, ch, r) { + i = r / 2; + PRINTK_DEBUG("RANK %d PRESENT\n", r); + dra = dratab[s->dimms[i].banks] + [s->dimms[i].width] + [s->dimms[i].cols - 9] + [s->dimms[i].rows - 12]; + + if (s->dimms[i].banks == 1) { + dra |= (1 << 7); + } + reg32 |= (dra << (r*8)); + } + MCHBAR32(0x208) = reg32; + c0dra = reg32; + PRINTK_DEBUG("C0DRA = 0x%08x\n", c0dra); + + reg32 = 0; + FOR_EACH_POPULATED_RANK(s->dimms, ch, r) { + reg32 |= (1 << r); + } + reg8 = (u8)(reg32 << 4) & 0xf0; + MCHBAR8(0x262) = (MCHBAR8(0x262) & ~0xf0) | reg8; + if (ONLY_DIMMA_IS_POPULATED(s->dimms, 0) || + ONLY_DIMMB_IS_POPULATED(s->dimms, 0)) { + MCHBAR8(0x260) = MCHBAR8(0x260) | 1; + } + + addr = 0x200; + c0drb = 0; + FOR_EACH_RANK(ch, r) { + IF_RANK_POPULATED(s->dimms, ch, r) { + ind = (c0dra >> (8*r)) & 0x7f; + c0drb = (u16)(c0drb + dradrb[ind][5]); + s->channel_capacity[0] += dradrb[ind][5] << 6; + } + MCHBAR16(addr) = c0drb; + addr += 2; + } + printk(BIOS_DEBUG, "Total memory = %dMB\n", s->channel_capacity[0]); +} + +static u8 sampledqs(u32 dqshighaddr, u32 strobeaddr, u8 highlow, u8 count) +{ + volatile u32 strobedata; + u8 dqsmatches = 1; + while (count--) { + MCHBAR8(0x5d8) = MCHBAR8(0x5d8) & ~0x2; + hpet_udelay(1); + MCHBAR8(0x5d8) = MCHBAR8(0x5d8) | 0x2; + hpet_udelay(1); + barrier(); + strobedata = read32((void*)strobeaddr); + barrier(); + hpet_udelay(1); + + if (((MCHBAR8(dqshighaddr) & 0x40) >> 6) != highlow) { + dqsmatches = 0; + } + } + + return dqsmatches; +} + +static void rcvenclock(u8 *coarse, u8 *medium, u8 bytelane) +{ + if (*medium < 3) { + (*medium)++; + MCHBAR16(0x58c) = (MCHBAR16(0x58c) & (u16)(~(0x3 << (bytelane*2)))) + | (*medium << (bytelane*2)); + } else { + *medium = 0; + (*coarse)++; + MCHBAR32(0x248) = (MCHBAR32(0x248) & ~0xf0000) | (*coarse << 16); + MCHBAR16(0x58c) = (MCHBAR16(0x58c) & (u16)(~0x3 << (bytelane*2))) + | (*medium << (bytelane*2)); + } +} + +static void sdram_rcven(struct sys_info *s) +{ + u8 curcoarse, savecoarse; + u8 curmedium, savemedium; + u8 pi, savepi; + u8 bytelane; + u8 bytelanecoarse[8] = { 0 }; + u8 minbytelanecoarse = 0xff; + u8 bytelaneoffset; + u8 maxbytelane = 8; + u32 strobeaddr = (RANK_IS_POPULATED(s->dimms, 0, 0)) ? 0 : 2*128*1024*1024; + u32 dqshighaddr; + + MCHBAR8(0x5d8) = MCHBAR8(0x5d8) & ~0xc; + MCHBAR8(0x5dc) = MCHBAR8(0x5dc) & ~0x80; + + PRINTK_DEBUG("rcven 0\n"); + for (bytelane = 0; bytelane < maxbytelane; bytelane++) { + PRINTK_DEBUG("rcven bytelane %d\n", bytelane); +//trylaneagain: + dqshighaddr = 0x561 + (bytelane << 2); + + curcoarse = s->selected_timings.CAS + 1; + pi = 0; + curmedium = 0; + + MCHBAR32(0x248) = (MCHBAR32(0x248) & ~0xf0000) | (curcoarse << 16); + MCHBAR16(0x58c) = (MCHBAR16(0x58c) & (u16)(~(0x3 << (bytelane*2)))) + | (curmedium << (bytelane*2)); + MCHBAR8(0x560+bytelane*4) = MCHBAR8(0x560+bytelane*4) & ~0x3f; + + savecoarse = curcoarse; + savemedium = curmedium; + savepi = pi; + + PRINTK_DEBUG("rcven 0.1\n"); + + //MCHBAR16(0x588) = (MCHBAR16(0x588) & (u16)~(0x3 << (bytelane*2))) | (1 << (bytelane*2)); // XXX comment out + + while (sampledqs(dqshighaddr, strobeaddr, 0, 3) == 0) { + //printk(BIOS_DEBUG, "coarse=%d medium=%d\n", curcoarse, curmedium); + rcvenclock(&curcoarse, &curmedium, bytelane); + if (curcoarse > 0xf) { + PRINTK_DEBUG("Error: coarse > 0xf\n"); + //goto trylaneagain; + break; + } + } + PRINTK_DEBUG("rcven 0.2\n"); + + savecoarse = curcoarse; + savemedium = curmedium; + rcvenclock(&curcoarse, &curmedium, bytelane); + + while (sampledqs(dqshighaddr, strobeaddr, 1, 3) == 0) { + savecoarse = curcoarse; + savemedium = curmedium; + rcvenclock(&curcoarse, &curmedium, bytelane); + if (curcoarse > 0xf) { + PRINTK_DEBUG("Error: coarse > 0xf\n"); + //goto trylaneagain; + break; + } + } + + PRINTK_DEBUG("rcven 0.3\n"); + curcoarse = savecoarse; + curmedium = savemedium; + MCHBAR32(0x248) = (MCHBAR32(0x248) & ~0xf0000) | (curcoarse << 16); + MCHBAR16(0x58c) = (MCHBAR16(0x58c) & (u16)(~(0x3 << bytelane*2))) + | (curmedium << (bytelane*2)); + + while (sampledqs(dqshighaddr, strobeaddr, 1, 3) == 0) { + savepi = pi; + pi++; + if (pi > s->maxpi) { + //if (s->nodll) { + pi = savepi = s->maxpi; + break; + //} + } + MCHBAR8(0x560 + bytelane*4) = (MCHBAR8(0x560 + bytelane*4) + & ~0x3f) | (pi << s->pioffset); + } + PRINTK_DEBUG("rcven 0.4\n"); + + pi = savepi; + MCHBAR8(0x560 + bytelane*4) = (MCHBAR8(0x560 + bytelane*4) & ~0x3f) + | (pi << s->pioffset); + rcvenclock(&curcoarse, &curmedium, bytelane); + if (sampledqs(dqshighaddr, strobeaddr, 1, 1) == 0) { + PRINTK_DEBUG("Error: DQS not high\n"); + //goto trylaneagain; + } + PRINTK_DEBUG("rcven 0.5\n"); + while (sampledqs(dqshighaddr, strobeaddr, 0, 3) == 0) { + curcoarse--; + MCHBAR32(0x248) = (MCHBAR32(0x248) & ~0xf0000) + | (curcoarse << 16); + if (curcoarse == 0) { + PRINTK_DEBUG("Error: DQS didnt hit 0\n"); + break; + } + } + + PRINTK_DEBUG("rcven 0.6\n"); + rcvenclock(&curcoarse, &curmedium, bytelane); + s->pi[bytelane] = pi; + bytelanecoarse[bytelane] = curcoarse; + } + + PRINTK_DEBUG("rcven 1\n"); + + bytelane = maxbytelane; + do { + bytelane--; + if (minbytelanecoarse > bytelanecoarse[bytelane]) { + minbytelanecoarse = bytelanecoarse[bytelane]; + } + } while (bytelane != 0); + + bytelane = maxbytelane; + do { + bytelane--; + bytelaneoffset = bytelanecoarse[bytelane] - minbytelanecoarse; + MCHBAR16(0x5fa) = (MCHBAR16(0x5fa) & (u16)(~(0x3 << (bytelane*2)))) + | (bytelaneoffset << (bytelane*2)); + } while (bytelane != 0); + + MCHBAR32(0x248) = (MCHBAR32(0x248) & ~0xf0000) | (minbytelanecoarse << 16); + + s->coarsectrl = minbytelanecoarse; + s->coarsedelay = MCHBAR16(0x5fa); + s->mediumphase = MCHBAR16(0x58c); + s->readptrdelay = MCHBAR16(0x588); + + PRINTK_DEBUG("rcven 2\n"); + MCHBAR8(0x5d8) = MCHBAR8(0x5d8) & ~0xe; + MCHBAR8(0x5d8) = MCHBAR8(0x5d8) | 0x2; + MCHBAR8(0x5d8) = MCHBAR8(0x5d8) | 0x4; + MCHBAR8(0x5d8) = MCHBAR8(0x5d8) | 0x8; + + MCHBAR8(0x5dc) = MCHBAR8(0x5dc) | 0x80; + MCHBAR8(0x5dc) = MCHBAR8(0x5dc) & ~0x80; + MCHBAR8(0x5dc) = MCHBAR8(0x5dc) | 0x80; + PRINTK_DEBUG("rcven 3\n"); +} + +static void sdram_mmap_regs(struct sys_info *s) +{ + bool reclaim; + u32 tsegsize; + u32 mmiosize; + u32 tom, tolud, touud, reclaimbase, reclaimlimit; + u32 gfxbase, gfxsize, gttbase, gttsize, tsegbase; + u16 ggc; + u16 ggc_to_uma[10] = { 0, 1, 4, 8, 16, 32, 48, 64, 128, 256 }; + u8 ggc_to_gtt[4] = { 0, 1, 0, 0 }; + + reclaimbase = 0; + reclaimlimit = 0; + ggc = pci_read_config16(PCI_DEV(0,0,0), GGC); + gfxsize = ggc_to_uma[(ggc & 0xf0) >> 4]; + gttsize = ggc_to_gtt[(ggc & 0xc00) >> 8]; + tom = s->channel_capacity[0]; + + tsegsize = 0x1; // 1MB + mmiosize = 0x400; // 1GB + + reclaim = false; + tolud = MIN(0x1000 - mmiosize, tom); + if ((tom - tolud) > 0x40) { + // reclaim = true; + } + if (reclaim) { + tolud = tolud & ~0x3f; + tom = tom & ~0x3f; + reclaimbase = MAX(0x1000, tom); + reclaimlimit = reclaimbase + (MIN(0x1000, tom) - tolud) - 0x40; + } + touud = tom; + if (reclaim) { + touud = reclaimlimit + 0x40; + } + + gfxbase = tolud - gfxsize; + gttbase = gfxbase - gttsize; + tsegbase = gttbase - tsegsize; + + /* Program the regs */ + pci_write_config16(PCI_DEV(0,0,0), 0xb0, (u16)(tolud << 4)); + pci_write_config16(PCI_DEV(0,0,0), 0xa0, (u16)(tom >> 6)); + if (reclaim) { + pci_write_config16(PCI_DEV(0,0,0), 0x98, (u16)(reclaimbase >> 6)); + pci_write_config16(PCI_DEV(0,0,0), 0x9a, (u16)(reclaimlimit >> 6)); + } + pci_write_config16(PCI_DEV(0,0,0), 0xa2, (u16)(touud)); + pci_write_config32(PCI_DEV(0,0,0), 0xa4, gfxbase << 20); + pci_write_config32(PCI_DEV(0,0,0), 0xa8, gttbase << 20); + pci_write_config32(PCI_DEV(0,0,0), 0xac, tsegbase << 20); +} + +static void sdram_enhancedmode(struct sys_info *s) +{ + u8 reg8, ch, r, j, i; + u32 mask32, reg32; + MCHBAR8(0x246) = MCHBAR8(0x246) | 1; + MCHBAR8(0x269 + 3) = MCHBAR8(0x269 + 3) | 1; + mask32 = (0x1f << 15) | (0x1f << 10) | (0x1f << 5) | 0x1f; + reg32 = (0x1e << 15) | (0x10 << 10) | (0x1e << 5) | 0x10; + MCHBAR32(0x120) = (MCHBAR32(0x120) & ~mask32) | reg32; + MCHBAR8(0x288 + 1) = 0x2; + MCHBAR16(0x288 + 2) = 0x0804; + MCHBAR16(0x288 + 4) = 0x2010; + MCHBAR8(0x288 + 6) = 0x40; + MCHBAR16(0x288 + 8) = 0x091c; + MCHBAR8(0x288 + 10) = 0xf2; + MCHBAR8(0x241) = MCHBAR8(0x241) | 1; + MCHBAR8(0x243) = MCHBAR8(0x243) | 1; + MCHBAR16(0x272) = MCHBAR16(0x272) | 0x100; + + reg8 = pci_read_config8(PCI_DEV(0,0,0), 0xf0); + pci_write_config8(PCI_DEV(0,0,0), 0xf0, reg8 | 1); + MCHBAR32(0xfa0) = 0x00000002; + MCHBAR32(0xfa4) = 0x20310002; + MCHBAR32(0x24) = 0x02020302; + MCHBAR32(0x30) = 0x001f1806; + MCHBAR32(0x34) = 0x01102800; + MCHBAR32(0x38) = 0x07000000; + MCHBAR32(0x3c) = 0x01014010; + MCHBAR32(0x40) = 0x0f038000; + reg8 = pci_read_config8(PCI_DEV(0,0,0), 0xf0); + pci_write_config8(PCI_DEV(0,0,0), 0xf0, reg8 & ~1); + + u32 nranks, curranksize, maxranksize, maxdra, dra; + u8 rankmismatch, dramismatch; + u8 drbtab[10] = { 0x4, 0x2, 0x8, 0x4, 0x8, 0x4, 0x10, 0x8, 0x20, 0x10 }; + + nranks = 0; + curranksize = 0; + maxranksize = 0; + maxdra = 0; + rankmismatch = 0; + dramismatch = 0; + FOR_EACH_POPULATED_RANK(s->dimms, ch, r) { + nranks++; + dra = (u8) ((MCHBAR32(0x208) >> (8*r)) & 0x7f); + curranksize = drbtab[dra]; + if (maxranksize == 0) { + maxranksize = curranksize; + maxdra = dra; + } + if (curranksize != maxranksize) { + rankmismatch = 1; + } + if (dra != maxdra) { + dramismatch = 1; + } + } + + reg8 = 0; + switch (nranks) { + case 4: + if (rankmismatch) { + reg8 = 0x64; + } else { + reg8 = 0xa4; + } + break; + case 1: + case 3: + reg8 = 0x64; + break; + case 2: + if (rankmismatch) { + reg8 = 0x64; + } else { + reg8 = 0x24; + } + break; + default: + die("Invalid number of ranks found, halt\n"); + break; + } + MCHBAR8(0x111) = (MCHBAR8(0x111) & ~0xfc) | (reg8 & 0xfc); + MCHBAR32(0xd0) = MCHBAR32(0xd0) & ~0x80000000; + + MCHBAR32(0x28) = 0xf; + MCHBAR8(0x2c4) = MCHBAR8(0x2c4) | 1; + + MCHBAR32(0x3c) = MCHBAR32(0x3c) & ~0xe000000; + MCHBAR32(0x40) = (MCHBAR32(0x40) & ~0xc0000) | 0x40000; + u32 clkcx[2][2][3] = { + { + {0, 0x0c080302, 0x08010204}, // 667 + {0x02040000, 0x08100102, 0} + }, + { + {0x18000000, 0x3021060c, 0x20010208}, + {0, 0x0c090306, 0} // 800 + } + }; + j = s->selected_timings.fsb_clock; + i = s->selected_timings.mem_clock; + + MCHBAR32(0x708) = clkcx[j][i][0]; + MCHBAR32(0x70c) = clkcx[j][i][1]; + MCHBAR32(0x6dc) = clkcx[j][i][2]; + MCHBAR8(0x40) = MCHBAR8(0x40) & ~0x2; +} + +static void sdram_periodic_rcomp(void) +{ + MCHBAR8(0x130) = MCHBAR8(0x130) & ~0x2; + while ((MCHBAR32(0x130) & 0x80000000) > 0) { + ; + } + MCHBAR16(0x1b4) = (MCHBAR16(0x1b4) & ~0x3000); + + MCHBAR8(0x5dc) = MCHBAR8(0x5dc) | 0x80; + MCHBAR16(0x170) = (MCHBAR16(0x170) & ~0xf) | 0x9; + + MCHBAR8(0x130) = MCHBAR8(0x130) | 0x82; +} + +#if 0 +static u8 dynamic_pattern(size_t memloc, u8 inv) +{ + u8 a, b, t, aorb, left, total; + + a = 0xff; + a &= ~((u8)((1 << ((memloc >> 13) & 0xf)) >> 1)); + b = ~a; + + if (memloc & 0x100) { + t = a; + a = b; + b = t; + } + + left = (u8)((memloc >> 11) & 0x3) + 1; + total = left + (u8)((memloc >> 9) & 0x3) + 1; + aorb = a; + if ((((memloc & 0xff) >> 3) % total) >= left) { + aorb = b; + } + + if (inv) { + return ~aorb; + } else { + return aorb; + } +} + +static void write_pattern(size_t addr) +{ + volatile u8 mem8; + u16 count; + size_t tmpaddr; + + for (count = 0; count < 1024; count++) { + tmpaddr = addr + count; + mem8 = dynamic_pattern(tmpaddr, 1) & 0xff; + write8((u8*)tmpaddr, mem8); + //barrier(); + } +} + +static void wpcache_flush(u32 cacheaddr) +{ + u32 flush; + for (flush = cacheaddr; flush < (cacheaddr + 0x2000); flush+=64) { + asm ( + "movl %0, %%eax" + : + :"r"(flush) + : + ); + asm ( + "clflush (%eax)" + ); + } +} + +static void wpcache_enable(u32 cacheaddr) +{ + asm ( + "movl %0, %%eax;" + : + :"r"(cacheaddr) + : + ); + asm ( + "orl 0x5, %eax\n\t" + "xorl %edx, %edx\n\t" + "movl $0x206, %ecx\n\t" + "wrmsr\n\t" + "movl $((~(0x2000 - 1)) | 0x800), %eax\n\t" + "movl $0x0f, %edx\n\t" + "movl $0x206, %ecx\n\t" + "wrmsr" + ); +} + +static void wpcache_disable(void) +{ + asm ( + "xorl %eax, %eax\n\t" + "xorl %edx, %edx\n\t" + "movl $0x206, %ecx\n\t" + "wrmsr\n\t" + "movl $0x206, %ecx\n\t" + "wrmsr" + ); +} + +static u8 is_readaligned(size_t addr, u8 vref) +{ + u8 status = 1; + volatile u8 mem8; + u32 datacnt; + u16 retry; + u32 memloc; + u32 cacheloc; + u8 tmpdata; + + MCHBAR8(0x1b6) = (MCHBAR8(0x1b6) & ~0x3f) | vref; + for (retry = 0; retry < 3; retry++) { + cacheloc = addr; + for (datacnt = 0; datacnt < 1024; datacnt++) { + memloc = addr + datacnt; + + if (cacheloc <= memloc) { + wpcache_enable(cacheloc); + wpcache_flush(cacheloc); + cacheloc += 0x2000; + } + + mem8 = read8((void*)memloc); + barrier(); + tmpdata = dynamic_pattern(memloc, 1); + status = 1; + if (mem8 != tmpdata) { + status = 0; + wpcache_disable(); + return status; + } + } + } + wpcache_disable(); + return status; +} + +static void sdram_vrefmargin(struct sys_info *s) +{ + u8 i, rank, temp, vrefplus, vrefminus, vrefval; + size_t strobeaddr; + u8 vrefplusval[4] = { 0x7, 0xe, 0x15, 0x1c }; + u8 vrefminusval[4] = { 0x27, 0x2e, 0x35, 0x3c }; + + vrefminus = vrefplus = 0; + + MCHBAR16(0x1b6) = MCHBAR16(0x1b6) & ~0x100; + + if (RANK_IS_POPULATED(s->dimms, 0, 0)) { + rank = 0; + } else { + rank = 2; + } + strobeaddr = rank*128*1024*1024; + write_pattern(strobeaddr); + + temp = 0; + for (i = 0; i < 4; i++) { + temp = is_readaligned(strobeaddr, vrefplusval[i]); + if (temp) { + vrefplus += temp; + } else { + break; + } + } + + temp = 0; + for (i = 0; i < 4; i++) { + temp = is_readaligned(strobeaddr, vrefminusval[i]); + if (temp) { + vrefminus += temp; + } else { + break; + } + } + + if ((vrefplus == 0) && (vrefminus == 0)) { + PRINTK_DEBUG("Error: vref not aligned\n"); + } + u8 vreflut[5][5] = { {0x00, 0x03, 0x04, 0x05, 0x05}, + {0x23, 0x00, 0x03, 0x04, 0x05}, + {0x24, 0x23, 0x00, 0x03, 0x04}, + {0x25, 0x24, 0x23, 0x00, 0x03}, + {0x25, 0x25, 0x24, 0x23, 0x00}}; + vrefval = vreflut[vrefminus][vrefplus]; + + MCHBAR8(0x1b6) = (MCHBAR8(0x1b6) & ~0x3f) | vrefval; +} +#endif + +static void sdram_new_trd(struct sys_info *s) +{ + u8 pidelay, i, j, k, cc, trd_perphase[5]; + u8 bypass, freqgb, trd, reg8, txfifo, cas; + u32 reg32, datadelay, tio, rcvendelay, maxrcvendelay; + u16 tmclk, thclk, buffertocore, postcalib; + u8 txfifo_lut[8] = { 0, 7, 6, 5, 2, 1, 4, 3 }; + u16 trd_adjust[2][2][5] = { + { + {3000, 3000, 0,0,0}, + {1000,2000,3000,1500,2500} + }, + { + {2000,1000,3000,0,0}, + {2500, 2500, 0,0,0} + }}; + + freqgb = 110; + buffertocore = 5000; + cas = s->selected_timings.CAS; + postcalib = (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) ? 1250 : 500; + tmclk = (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) ? 3000 : 2500; + tmclk = tmclk * 100 / freqgb; + thclk = (s->selected_timings.fsb_clock == FSB_CLOCK_667MHz) ? 6000 : 5000; + switch (s->selected_timings.mem_clock) { + case MEM_CLOCK_667MHz: + if (s->selected_timings.fsb_clock == FSB_CLOCK_667MHz) { + cc = 2; + } else { + cc = 3; + } + break; + default: + case MEM_CLOCK_800MHz: + if (s->selected_timings.fsb_clock == FSB_CLOCK_667MHz) { + cc = 5; + } else { + cc = 2; + } + break; + } + tio = (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) ? 2700 : 3240; + maxrcvendelay = 0; + pidelay = (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) ? 24 : 20; + + for (i = 0; i < 8; i++) { + rcvendelay = ((u32)((s->coarsedelay >> (i << 1)) & 0x3) * (u32)(tmclk)); + rcvendelay += ((u32)((s->readptrdelay >> (i << 1)) & 0x3) * (u32)(tmclk) / 2); + rcvendelay += ((u32)((s->mediumphase >> (i << 1)) & 0x3) * (u32)(tmclk) / 4); + rcvendelay += (u32)(pidelay * s->pi[i]); + maxrcvendelay = MAX(maxrcvendelay, rcvendelay); + } + + if ((MCHBAR8(0xc54+3) == 0xff) && (MCHBAR8(0xc08) & 0x80)) { + bypass = 1; + } else { + bypass = 0; + } + + txfifo = 0; + reg8 = (MCHBAR8(0x188) & 0xe) >> 1; + txfifo = txfifo_lut[reg8] & 0x7; + + datadelay = tmclk * (2*txfifo + 4*s->coarsectrl + 4*(bypass-1) + 13) / 4 + + tio + maxrcvendelay + pidelay + buffertocore + postcalib; + if (s->async) { + datadelay += tmclk / 2; + } + + j = (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) ? 0 : 1; + k = (s->selected_timings.fsb_clock == FSB_CLOCK_667MHz) ? 0 : 1; + + if (j == 0 && k == 0) { + datadelay -= 3084; + } + + trd = 0; + for (i = 0; i < cc; i++) { + reg32 = datadelay - (trd_adjust[k][j][i] * 100 / freqgb); + trd_perphase[i] = (u8)(reg32 / thclk) - 2; + trd_perphase[i] += 1; + if (trd_perphase[i] > trd) { + trd = trd_perphase[i]; + } + } + + MCHBAR16(0x248) = (MCHBAR16(0x248) & ~0x1f00) | (trd << 8); +} + +static void sdram_powersettings(struct sys_info *s) +{ + u8 j; + u32 reg32; + + /* Thermal sensor */ + MCHBAR8(0x3808) = 0x9b; + MCHBAR32(0x380c) = (MCHBAR32(0x380c) & ~0x00ffffff) | 0x1d00; + MCHBAR8(0x3814) = 0x08; + MCHBAR8(0x3824) = 0x00; + MCHBAR8(0x3809) = (MCHBAR8(0x3809) & ~0xf) | 0x4; + MCHBAR8(0x3814) = (MCHBAR8(0x3814) & ~1) | 1; + MCHBAR8(0x3812) = (MCHBAR8(0x3812) & ~0x80) | 0x80; + + /* Clock gating */ + MCHBAR32(0xf18) = MCHBAR32(0xf18) & ~0x00040001; + MCHBAR8(0xfac+3) = MCHBAR8(0xfac+3) & ~0x80; + MCHBAR8(0xff8+3) = MCHBAR8(0xff8+3) & ~0x80; + MCHBAR16(0xff0) = MCHBAR16(0xff0) & ~0x1fff; + MCHBAR32(0xfb0) = MCHBAR32(0xfb0) & ~0x0001ffff; + MCHBAR16(0x48) = (MCHBAR16(0x48) & ~0x03ff) & 0x6; + MCHBAR32(0x20) = (MCHBAR32(0x20) & ~0xffffffff) | 0x20; + MCHBAR8(0xd14) = MCHBAR8(0xd14) & ~1; + MCHBAR8(0x239) = s->selected_timings.CAS - 1 + 0x15; + MCHBAR16(0x2d1) = (MCHBAR16(0x2d1) & ~0x07fc) | 0x40; + MCHBAR16(0x6d1) = (MCHBAR16(0x6d1) & ~0x0fff) | 0xd00; + MCHBAR16(0x210) = MCHBAR16(0x210) & ~0x0d80; + MCHBAR16(0xf6c+2) = 0xffff; + + /* Sequencing */ + MCHBAR32(0x14) = (MCHBAR32(0x14) & ~0x1fffffff) | 0x1f643fff; + MCHBAR32(0x18) = (MCHBAR32(0x18) & ~0xffffff7f) | 0x02010000; + MCHBAR16(0x1c) = (MCHBAR16(0x1c) & ~0x7000) | (0x3 << 12); + + /* Power */ + MCHBAR32(0x1104) = (MCHBAR32(0x1104) & ~0xffff0003) | 0x10100000; + MCHBAR32(0x1108) = (MCHBAR32(0x1108) & ~0x0001bff7) | 0x00000078; + if (s->selected_timings.fsb_clock == FSB_CLOCK_667MHz) { + MCHBAR16(0x110c) = (MCHBAR16(0x110c) & ~0x03ff) | 0xc8; + } else { + MCHBAR16(0x110c) = (MCHBAR16(0x110c) & ~0x03ff) | 0x100; + } + j = (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) ? 0 : 1; + + MCHBAR32(0x1110) = (MCHBAR32(0x1110) & ~0x1fff37f) | 0x10810700; + MCHBAR8(0x1114) = (MCHBAR8(0x1114) & ~0x07) | 1; + MCHBAR8(0x1124) = MCHBAR8(0x1124) & ~0x02; + + u16 ddr2lut[2][4][2] = {{ + {0x0000, 0x0000}, + {0x019A, 0x0039}, + {0x0099, 0x1049}, + {0x0000, 0x0000} + }, + { + {0x0000, 0x0000}, + {0x019A, 0x0039}, + {0x0099, 0x1049}, + {0x0099, 0x2159} + }}; + + MCHBAR16(0x23c) = 0x7a89; + MCHBAR8(0x117) = 0xaa; + MCHBAR16(0x118) = ddr2lut[j][s->selected_timings.CAS - 3][1]; + MCHBAR16(0x115) = (MCHBAR16(0x115) & ~0x7fff) | ddr2lut[j] + [s->selected_timings.CAS - 3][0]; + MCHBAR16(0x210) = (MCHBAR16(0x210) & ~0xf000) | 0xf000; + MCHBAR8(0x2c02) = (MCHBAR8(0x2c02) & ~0x77) | (4 << 4 | 4); + if (s->nodll) { + reg32 = 0x30000000; + } else { + reg32 = 0; + } + MCHBAR32(0x2c0) = (MCHBAR32(0x2c0) & ~0x0f000000) | 0x20000000 | reg32; + MCHBAR32(0x2d1) = (MCHBAR32(0x2d1) & ~0x00f00000) | 0x00f00000; + MCHBAR32(0x6d0) = (MCHBAR32(0x6d0) & ~0x001ff000) | (0xbf << 20); + MCHBAR16(0x610) = (MCHBAR16(0x610) & ~0x1f7f) | (0xb << 8) | (7 << 4) | 0xb; + MCHBAR16(0x612) = 0x3264; + MCHBAR16(0x614) = (MCHBAR16(0x614) & ~0x3f3f) | (0x14 << 8) | 0xa; + + MCHBAR32(0x6c0) = MCHBAR32(0x6c0) | 0x80002000; +} + +static void sdram_programddr(void) +{ + MCHBAR16(0x6d1) = (MCHBAR16(0x6d1) & ~0x03ff) | 0x100; + MCHBAR16(0x210) = (MCHBAR16(0x210) & ~0x003f) | 0x10; + MCHBAR16(0x2d1) = (MCHBAR16(0x2d1) & ~0x7000) | 0x2000; + MCHBAR8(0x180) = MCHBAR8(0x180) & ~0xe; + MCHBAR8(0x18c) = MCHBAR8(0x18c) & ~0xc; + MCHBAR8(0x561) = MCHBAR8(0x561) & ~0xe; + MCHBAR8(0x565) = MCHBAR8(0x565) & ~0xe; + MCHBAR8(0x569) = MCHBAR8(0x569) & ~0xe; + MCHBAR8(0x56d) = MCHBAR8(0x56d) & ~0xe; + MCHBAR8(0x571) = MCHBAR8(0x571) & ~0xe; + MCHBAR8(0x575) = MCHBAR8(0x575) & ~0xe; + MCHBAR8(0x579) = MCHBAR8(0x579) & ~0xe; + MCHBAR8(0x57d) = MCHBAR8(0x57d) & ~0xe; + MCHBAR8(0x18c) = MCHBAR8(0x18c) & ~0x2; + MCHBAR16(0x1b4) = MCHBAR16(0x1b4) & ~0x400; + MCHBAR16(0x210) = MCHBAR16(0x210) & ~0xdc0; + MCHBAR8(0x239) = MCHBAR8(0x239) & ~0x80; + MCHBAR32(0x2c0) = MCHBAR32(0x2c0) & ~(1 << 22); + MCHBAR16(0x2d1) = MCHBAR16(0x2d1) & ~0x80fc; + MCHBAR16(0x6d1) = MCHBAR16(0x6d1) & ~0xc00; + MCHBAR8(0x180) = MCHBAR8(0x180) & ~0xd; + MCHBAR8(0x561) = MCHBAR8(0x561) & ~1; + MCHBAR8(0x565) = MCHBAR8(0x565) & ~1; + MCHBAR8(0x569) = MCHBAR8(0x569) & ~1; + MCHBAR8(0x56d) = MCHBAR8(0x56d) & ~1; + MCHBAR8(0x571) = MCHBAR8(0x571) & ~1; + MCHBAR8(0x575) = MCHBAR8(0x575) & ~1; + MCHBAR8(0x579) = MCHBAR8(0x579) & ~1; + MCHBAR8(0x57d) = MCHBAR8(0x57d) & ~1; + MCHBAR32(0x248) = (MCHBAR32(0x248) & ~0x700000) | (0x3 << 20); + MCHBAR32(0x2c0) = MCHBAR32(0x2c0) & ~0x100000; + MCHBAR8(0x592) = MCHBAR8(0x592) | 0x1e; + MCHBAR8(0x2c15) = MCHBAR8(0x2c15) | 0x3; + MCHBAR32(0x62c) = (MCHBAR32(0x62c) & ~0xc000000) | 0x4000000; + MCHBAR16(0x248) = MCHBAR16(0x248) | 0x6000; + MCHBAR32(0x260) = MCHBAR32(0x260) | 0x10000; + MCHBAR8(0x2c0) = MCHBAR8(0x2c0) | 0x10; + MCHBAR32(0x2d0) = MCHBAR32(0x2d0) | (0xf << 24); + MCHBAR8(0x189) = MCHBAR8(0x189) | 0x7; + MCHBAR8(0x592) = MCHBAR8(0x592) | 0xc0; + MCHBAR8(0x124) = MCHBAR8(0x124) | 0x7; + MCHBAR16(0x12a) = (MCHBAR16(0x12a) & ~0xffff) | 0x0080; + MCHBAR8(0x12c) = (MCHBAR8(0x12c) & ~0xff) | 0x10; + MCHBAR16(0x2c0) = MCHBAR16(0x2c0) | 0x1e0; + MCHBAR8(0x189) = MCHBAR8(0x189) | 0x18; + MCHBAR8(0x193) = MCHBAR8(0x193) | 0xd; + MCHBAR16(0x212) = MCHBAR16(0x212) | 0xa3f; + MCHBAR8(0x248) = MCHBAR8(0x248) | 0x3; + MCHBAR8(0x268) = (MCHBAR8(0x268) & ~0xff) | 0x4a; + MCHBAR8(0x2c4) = MCHBAR8(0x2c4) & ~0x60; + MCHBAR16(0x592) = MCHBAR16(0x592) | 0x321; +} + +static void sdram_programdqdqs(struct sys_info *s) +{ + u16 mdclk, tpi, refclk, dqdqs_out, dqdqs_outdelay, dqdqs_delay; + u32 coretomcp, txdelay, tmaxunmask, tmaxpi; + u8 repeat, halfclk, feature, reg8, push; + u16 cwb, pimdclk; + u32 reg32; + u8 txfifotab[8] = { 0, 7, 6, 5, 2, 1, 4, 3 }; + + tpi = 3000; + dqdqs_out = 4382; + dqdqs_outdelay = 5083; + dqdqs_delay = 4692; + coretomcp = 0; + txdelay = 0; + halfclk = 0; + tmaxunmask = 0; + tmaxpi = 0; + repeat = 2; + feature = 0; + cwb = 0; + pimdclk = 0; + reg32 = 0; + push = 0; + reg8 = 0; + + mdclk = (s->selected_timings.mem_clock == MEM_CLOCK_667MHz) ? 3000 : 2500; + refclk = 3000 - mdclk; + + coretomcp = ((MCHBAR8(0x246) >> 2) & 0x3) + 1; + coretomcp *= mdclk; + + reg8 = (MCHBAR8(0x188) & 0xe) >> 1; + + while (repeat) { + txdelay = mdclk * ( + ((MCHBAR16(0x220) >> 8) & 0x7) + + (MCHBAR8(0x24d) & 0xf) + + (MCHBAR8(0x24e) & 0x1) + ) + + txfifotab[reg8]*(mdclk/2) + + coretomcp + + refclk + + cwb; + halfclk = (MCHBAR8(0x5d9) >> 1) & 0x1; + if (halfclk) { + txdelay -= mdclk / 2; + reg32 = dqdqs_outdelay + coretomcp - mdclk / 2; + } else { + reg32 = dqdqs_outdelay + coretomcp; + } + + tmaxunmask = txdelay - mdclk - dqdqs_out; + tmaxpi = tmaxunmask - tpi; + + if ((tmaxunmask >= reg32) && tmaxpi >= dqdqs_delay) { + if (repeat == 2) { + MCHBAR32(0x2c0) = MCHBAR32(0x2c0) & ~(1 << 23); + } + feature = 1; + repeat = 0; + } else { + repeat--; + MCHBAR32(0x2c0) = MCHBAR32(0x2c0) | (1 << 23); + cwb = 2 * mdclk; + } + } + + if (!feature) { + MCHBAR8(0x2d1) = MCHBAR8(0x2d1) & ~0x3; + return; + } + MCHBAR8(0x2d1) = MCHBAR8(0x2d1) | 0x3; + MCHBAR16(0x210) = (MCHBAR16(0x210) & ~0xf000) | (pimdclk << 12); + MCHBAR8(0x2c02) = (MCHBAR8(0x2c02) & ~0x77) | (push << 4) | push; + MCHBAR32(0x2c0) = (MCHBAR32(0x2c0) & ~0xf000000) | 0x3000000; +} + +/** + * @param boot_path: 0 = normal, 1 = reset, 2 = resume from s3 + */ +void sdram_initialize(int boot_path, const u8 *spd_addresses) +{ + struct sys_info sysinfo; + u8 reg8; + + PRINTK_DEBUG("Setting up RAM controller.\n"); + + memset(&sysinfo, 0, sizeof(sysinfo)); + + sysinfo.boot_path = boot_path; + sysinfo.spd_map[0] = spd_addresses[0]; + sysinfo.spd_map[1] = spd_addresses[1]; + sysinfo.spd_map[2] = spd_addresses[2]; + sysinfo.spd_map[3] = spd_addresses[3]; + + sdram_read_spds(&sysinfo); + + /* Choose Common Frequency */ + sdram_detect_ram_speed(&sysinfo); + + /* Determine smallest common tRAS, tRP, tRCD, etc */ + sdram_detect_smallest_params(&sysinfo); + + /* Enable HPET */ + enable_hpet(); + hpet_udelay(300000); + + MCHBAR16(0xc1c) = MCHBAR16(0xc1c) | (1 << 15); + + hpet_udelay(100000); + + sdram_clk_crossing(&sysinfo); + + sdram_checkreset(); + PRINTK_DEBUG("Done checkreset\n"); + + sdram_clkmode(&sysinfo); + PRINTK_DEBUG("Done clkmode\n"); + + sdram_timings(&sysinfo); + PRINTK_DEBUG("Done timings (dqs dll enabled)\n"); + + sdram_dlltiming(&sysinfo); + PRINTK_DEBUG("Done dlltiming\n"); + + hpet_udelay(200000); + + sdram_rcomp(&sysinfo); + PRINTK_DEBUG("Done RCOMP\n"); + + sdram_odt(&sysinfo); + PRINTK_DEBUG("Done odt\n"); + + while ((MCHBAR8(0x130) & 0x1) != 0); + + sdram_mmap(&sysinfo); + PRINTK_DEBUG("Done mmap\n"); + + // Enable DDR IO buffer + MCHBAR8(0x5dd) = (MCHBAR8(0x5dd) & ~0x3f) | 0x8; + MCHBAR8(0x5d8) = MCHBAR8(0x5d8) | 0x1; + + sdram_rcompupdate(&sysinfo); + PRINTK_DEBUG("Done RCOMP update\n"); + + MCHBAR8(0x40) = MCHBAR8(0x40) | 0x2; + + if (sysinfo.boot_path != BOOT_PATH_RESUME) { + MCHBAR32(0x260) = MCHBAR32(0x260) | (1 << 27); + } + + sdram_jedecinit(&sysinfo); + PRINTK_DEBUG("Done MRS\n"); + + sdram_misc(&sysinfo); + PRINTK_DEBUG("Done misc\n"); + + sdram_zqcl(&sysinfo); + PRINTK_DEBUG("Done zqcl\n"); + + if (sysinfo.boot_path != BOOT_PATH_RESUME) { + MCHBAR32(0x268) = MCHBAR32(0x268) | 0xc0000000; + } + + sdram_dradrb(&sysinfo); + PRINTK_DEBUG("Done dradrb\n"); + + sdram_rcven(&sysinfo); + PRINTK_DEBUG("Done rcven\n"); + + //PRINTK_DEBUG("Start vref margin..."); + //sdram_vrefmargin(&sysinfo); + //PRINTK_DEBUG("Done vref margin\n"); + + sdram_new_trd(&sysinfo); + PRINTK_DEBUG("Done tRD\n"); + + sdram_mmap_regs(&sysinfo); + PRINTK_DEBUG("Done mmap regs\n"); + + sdram_enhancedmode(&sysinfo); + PRINTK_DEBUG("Done enhanced mode\n"); + + sdram_powersettings(&sysinfo); + PRINTK_DEBUG("Done power settings\n"); + + sdram_programddr(); + PRINTK_DEBUG("Done programming ddr\n"); + + sdram_programdqdqs(&sysinfo); + PRINTK_DEBUG("Done programming dqdqs\n"); + + sdram_periodic_rcomp(); + PRINTK_DEBUG("Done periodic RCOMP\n"); + + /* Set init done */ + MCHBAR32(0x268) = MCHBAR32(0x268) | 0x40000000; + + /* Tell ICH7 that we're done */ + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8 & ~0x80); + + /* Tell northbridge we're done */ + reg8 = pci_read_config8(PCI_DEV(0,0,0), 0xf4); + pci_write_config8(PCI_DEV(0,0,0), 0xf4, reg8 | 1); + +#if 0 + PRINTK_DEBUG("Start dummy write/reads...\n"); + volatile u32 data; + u8 ch, r, bank; + u32 reg32; + u16 i; + FOR_EACH_POPULATED_RANK(sysinfo.dimms, ch, r) { + bank = i = 0; + for (bank = 0; bank < 8; bank++) { +// for (i = 0; i < (1 << 12); i+=4) { + reg32 = (ch << 29) | (r*0x8000000) | (bank << 12) | i; + barrier(); + write32((u32 *)reg32, 0xffffffff); + data = read32((u32 *)reg32); + PRINTK_DEBUG("Wrote ones: Read: [0x%08x]=0x%08x\n", reg32, data); + barrier(); + write32((u32 *)reg32, 0x00000000); + data = read32((u32 *)reg32); + PRINTK_DEBUG("Wrote zeroes: Read: [0x%08x]=0x%08x\n", reg32, data); +// } + } + } +#endif + + printk(BIOS_DEBUG, "RAM initialization finished.\n"); +} diff --git a/src/northbridge/intel/pineview/raminit.h b/src/northbridge/intel/pineview/raminit.h new file mode 100644 index 0000000..2cfa2ff --- /dev/null +++ b/src/northbridge/intel/pineview/raminit.h @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef RAMINIT_H +#define RAMINIT_H + +#include "pineview.h" + +void sdram_initialize(int boot_path, const u8 *sdram_addresses); + +#endif /* RAMINIT_H */

1 0

Patch set updated for coreboot: mainboard/intel/d510mo: Add Intel D510MO mainboard
by Damien Zammit 14 Nov '15

14 Nov '15

Damien Zammit (damien(a)zamaudio.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10074 -gerrit commit 3fde04f3b508dbc707de5c697cb9a7e303636091 Author: Damien Zammit <damien(a)zamaudio.com> Date: Mon May 4 10:41:21 2015 +1000 mainboard/intel/d510mo: Add Intel D510MO mainboard Board currently has no raminit, (uses Pineview minimal northbridge) Board boots to UART console. Change-Id: I8e459c6d40e0711fac8fb8cfbf31d9cb2aaab3aa Signed-off-by: Damien Zammit <damien(a)zamaudio.com> --- src/mainboard/intel/d510mo/Kconfig | 59 +++++++++ src/mainboard/intel/d510mo/Kconfig.name | 2 + src/mainboard/intel/d510mo/Makefile.inc | 1 + src/mainboard/intel/d510mo/acpi/ec.asl | 49 +++++++ src/mainboard/intel/d510mo/acpi/ich7_pci_irqs.asl | 82 ++++++++++++ src/mainboard/intel/d510mo/acpi/mainboard.asl | 34 +++++ .../intel/d510mo/acpi/pineview_pci_irqs.asl | 69 ++++++++++ src/mainboard/intel/d510mo/acpi/superio.asl | 45 +++++++ src/mainboard/intel/d510mo/acpi_tables.c | 36 +++++ src/mainboard/intel/d510mo/board_info.txt | 5 + src/mainboard/intel/d510mo/cstates.c | 7 + src/mainboard/intel/d510mo/devicetree.cb | 88 +++++++++++++ src/mainboard/intel/d510mo/dsdt.asl | 44 +++++++ src/mainboard/intel/d510mo/hda_verb.c | 7 + src/mainboard/intel/d510mo/romstage.c | 145 +++++++++++++++++++++ 15 files changed, 673 insertions(+) diff --git a/src/mainboard/intel/d510mo/Kconfig b/src/mainboard/intel/d510mo/Kconfig new file mode 100644 index 0000000..0a5caab --- /dev/null +++ b/src/mainboard/intel/d510mo/Kconfig @@ -0,0 +1,59 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2015 Damien Zammit <damien(a)zamaudio.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +if BOARD_INTEL_D510MO + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select CPU_INTEL_SOCKET_ATOM_D5XX + select NORTHBRIDGE_INTEL_PINEVIEW + select SOUTHBRIDGE_INTEL_I82801GX + select SUPERIO_WINBOND_W83627THG + select HAVE_ACPI_TABLES + #select BROKEN_CAR_MIGRATE + #select USE_WATCHDOG_ON_BOOT + #select UDELAY_TSC + #select EARLY_CBMEM_INIT + select BOARD_ROMSIZE_KB_1024 + select POST_IO + +config MAX_CPUS + int + default 4 + +config MMCONF_BASE_ADDRESS + hex + default 0xe0000000 + +config CBFS_SIZE + hex "Size of CBFS filesystem in ROM" + default 0x100000 + +config MAINBOARD_DIR + string + default intel/d510mo + +config MAINBOARD_PART_NUMBER + string + default "D510MO" + +config IRQ_SLOT_COUNT + int + default 7 + +endif # BOARD_INTEL_D510MO diff --git a/src/mainboard/intel/d510mo/Kconfig.name b/src/mainboard/intel/d510mo/Kconfig.name new file mode 100644 index 0000000..2df0dca --- /dev/null +++ b/src/mainboard/intel/d510mo/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_INTEL_D510MO + bool "D510MO" diff --git a/src/mainboard/intel/d510mo/Makefile.inc b/src/mainboard/intel/d510mo/Makefile.inc new file mode 100644 index 0000000..f9621db --- /dev/null +++ b/src/mainboard/intel/d510mo/Makefile.inc @@ -0,0 +1 @@ +ramstage-y += cstates.c diff --git a/src/mainboard/intel/d510mo/acpi/ec.asl b/src/mainboard/intel/d510mo/acpi/ec.asl new file mode 100644 index 0000000..31c7001 --- /dev/null +++ b/src/mainboard/intel/d510mo/acpi/ec.asl @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Device(EC0) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 1) + + Method (_CRS, 0) + { + Name (ECMD, ResourceTemplate() + { + IO (Decode16, 0x62, 0x62, 0, 1) + IO (Decode16, 0x66, 0x66, 0, 1) + }) + + Return (ECMD) + } + + Method (_REG, 2) + { + // This method is needed by Windows XP/2000 + // for EC initialization before a driver + // is loaded + } + + Name (_GPE, 23) // GPI07 / GPE23 -> Runtime SCI + + // TODO EC Query methods + + // TODO Scope _SB devices for AC power, LID, Power button + +} diff --git a/src/mainboard/intel/d510mo/acpi/ich7_pci_irqs.asl b/src/mainboard/intel/d510mo/acpi/ich7_pci_irqs.asl new file mode 100644 index 0000000..cf9f98c --- /dev/null +++ b/src/mainboard/intel/d510mo/acpi/ich7_pci_irqs.asl @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * 0:1e.0 PCI bridge of the ICH7 + */ + +If (PICM) { + Return (Package() { + Package() { 0x0000ffff, 0, 0, 22}, + Package() { 0x0000ffff, 1, 0, 20}, + Package() { 0x0000ffff, 2, 0, 17}, + Package() { 0x0000ffff, 3, 0, 16}, + + Package() { 0x0001ffff, 0, 0, 22}, + Package() { 0x0001ffff, 1, 0, 20}, + Package() { 0x0001ffff, 2, 0, 17}, + Package() { 0x0001ffff, 3, 0, 16}, + + Package() { 0x0002ffff, 0, 0, 22}, + Package() { 0x0002ffff, 1, 0, 20}, + Package() { 0x0002ffff, 2, 0, 17}, + Package() { 0x0002ffff, 3, 0, 16}, + + Package() { 0x0003ffff, 0, 0, 22}, + Package() { 0x0003ffff, 1, 0, 20}, + Package() { 0x0003ffff, 2, 0, 17}, + Package() { 0x0003ffff, 3, 0, 16}, + + Package() { 0x0005ffff, 0, 0, 22}, + Package() { 0x0005ffff, 1, 0, 20}, + Package() { 0x0005ffff, 2, 0, 17}, + Package() { 0x0005ffff, 3, 0, 16}, + + Package() { 0x0008ffff, 0, 0, 20}, + }) +} Else { + Return (Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0}, + + Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0001ffff, 1, \_SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0001ffff, 2, \_SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0001ffff, 3, \_SB.PCI0.LPCB.LNKA, 0}, + + Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0002ffff, 1, \_SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0002ffff, 2, \_SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0002ffff, 3, \_SB.PCI0.LPCB.LNKA, 0}, + + Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0003ffff, 1, \_SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0003ffff, 2, \_SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0003ffff, 3, \_SB.PCI0.LPCB.LNKA, 0}, + + Package() { 0x0005ffff, 0, \_SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0005ffff, 1, \_SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0005ffff, 2, \_SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0005ffff, 3, \_SB.PCI0.LPCB.LNKA, 0}, + + Package() { 0x0008ffff, 0, \_SB.PCI0.LPCB.LNKE, 0}, + }) +} diff --git a/src/mainboard/intel/d510mo/acpi/mainboard.asl b/src/mainboard/intel/d510mo/acpi/mainboard.asl new file mode 100644 index 0000000..73189be --- /dev/null +++ b/src/mainboard/intel/d510mo/acpi/mainboard.asl @@ -0,0 +1,34 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Device (SLPB) +{ + Name(_HID, EisaId("PNP0C0E")) + + // Wake + Name(_PRW, Package(){0x1d, 0x04}) +} + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) + + // Wake + Name(_PRW, Package(){0x1d, 0x04}) +} diff --git a/src/mainboard/intel/d510mo/acpi/pineview_pci_irqs.asl b/src/mainboard/intel/d510mo/acpi/pineview_pci_irqs.asl new file mode 100644 index 0000000..446b6b6 --- /dev/null +++ b/src/mainboard/intel/d510mo/acpi/pineview_pci_irqs.asl @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * i945 + */ + + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 }, + Package() { 0x001cffff, 1, 0, 16 }, + Package() { 0x001cffff, 2, 0, 18 }, + Package() { 0x001cffff, 3, 0, 19 }, + // USB and EHCI 0:1d.x + Package() { 0x001dffff, 0, 0, 23 }, + Package() { 0x001dffff, 1, 0, 19 }, + Package() { 0x001dffff, 2, 0, 18 }, + Package() { 0x001dffff, 3, 0, 16 }, + // AC97/IDE 0:1e.2, 0:1e.3 + Package() { 0x001effff, 0, 0, 20 }, + // LPC device 0:1f.0, 0:1f.2 + Package() { 0x001fffff, 0, 0, 19 }, + Package() { 0x001fffff, 1, 0, 19 }, + }) + } Else { + Return (Package() { + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, + // USB and EHCI 0:1d.x + Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001dffff, 1, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001dffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001dffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }, + // AC97/IDE 0:1e.2, 0:1e.3 + Package() { 0x001effff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, + // LPC device 0:1f.0, 0:1f.2 + Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKD, 0 }, + }) + } +} diff --git a/src/mainboard/intel/d510mo/acpi/superio.asl b/src/mainboard/intel/d510mo/acpi/superio.asl new file mode 100644 index 0000000..d615242 --- /dev/null +++ b/src/mainboard/intel/d510mo/acpi/superio.asl @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +Device (SIO1) +{ + Name (_HID, EISAID("PNP0A05")) + Name (_UID, 1) + + Device (UAR1) + { + Name(_HID, EISAID("PNP0501")) + Name(_UID, 1) + + // Some methods need an implementation here: + // missing: _STA, _DIS, _CRS, _PRS, + // missing: _SRS, _PS0, _PS3 + } + + Device (UAR2) + { + Name(_HID, EISAID("PNP0501")) + Name(_UID, 2) + + // Some methods need an implementation here: + // missing: _STA, _DIS, _CRS, _PRS, + // missing: _SRS, _PS0, _PS3 + } +} diff --git a/src/mainboard/intel/d510mo/acpi_tables.c b/src/mainboard/intel/d510mo/acpi_tables.c new file mode 100644 index 0000000..629a044 --- /dev/null +++ b/src/mainboard/intel/d510mo/acpi_tables.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <arch/ioapic.h> + +#include "southbridge/intel/i82801gx/nvs.h" + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ +} diff --git a/src/mainboard/intel/d510mo/board_info.txt b/src/mainboard/intel/d510mo/board_info.txt new file mode 100644 index 0000000..192798a --- /dev/null +++ b/src/mainboard/intel/d510mo/board_info.txt @@ -0,0 +1,5 @@ +Category: desktop +Board URL: http://www.intel.com/p/en_US/support/highlights/dsktpboards/d510mo +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n diff --git a/src/mainboard/intel/d510mo/cstates.c b/src/mainboard/intel/d510mo/cstates.c new file mode 100644 index 0000000..2d543ff --- /dev/null +++ b/src/mainboard/intel/d510mo/cstates.c @@ -0,0 +1,7 @@ +#include <device/device.h> +#include <arch/x86/include/arch/acpigen.h> + +int get_cst_entries(acpi_cstate_t **entries) +{ + return 0; +} diff --git a/src/mainboard/intel/d510mo/devicetree.cb b/src/mainboard/intel/d510mo/devicetree.cb new file mode 100644 index 0000000..69431cb --- /dev/null +++ b/src/mainboard/intel/d510mo/devicetree.cb @@ -0,0 +1,88 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2015 Damien Zammit <damien(a)zamaudio.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +chip northbridge/intel/pineview # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/model_106cx # CPU + device lapic 00 on end # APIC + device lapic 01 on end # APIC + device lapic 02 on end # APIC + device lapic 03 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host Bridge + device pci 2.0 off end # Integrated graphics controller + chip southbridge/intel/i82801gx # Southbridge + device pci 1b.0 on end # Audio + device pci 1c.0 on end # PCIe 1 + device pci 1c.1 on end # PCIe 2 + device pci 1c.2 on end # PCIe 3 + device pci 1c.3 on end # PCIe 4 + device pci 1d.0 on end # USB + device pci 1d.1 on end # USB + device pci 1d.2 on end # USB + device pci 1d.3 on end # USB + device pci 1d.7 on end # USB + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # ISA bridge + chip superio/winbond/w83627thg # Super I/O + device pnp 4e.0 off end # Floppy + device pnp 4e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 4e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + drq 0xf1 = 0 + end + device pnp 4e.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + drq 0xf0 = 0x80 + end + device pnp 4e.6 off end + device pnp 4e.7 off end + device pnp 4e.8 off end + device pnp 4e.9 off end + device pnp 4e.a off end # ACPI + device pnp 4e.b on # HWM + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 1f.1 off end + device pci 1f.2 on end # SATA + device pci 1f.3 on end # SMbus + device pci 1f.4 off end + device pci 1f.5 off end + device pci 1f.6 off end + end + end +end diff --git a/src/mainboard/intel/d510mo/dsdt.asl b/src/mainboard/intel/d510mo/dsdt.asl new file mode 100644 index 0000000..5f64210 --- /dev/null +++ b/src/mainboard/intel/d510mo/dsdt.asl @@ -0,0 +1,44 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20090419 // OEM revision +) +{ + #include <southbridge/intel/i82801gx/acpi/globalnvs.asl> + + // mainboard specific devices + #include "acpi/mainboard.asl" + + Scope (\_SB) { + Device (PCI0) + { + #include <northbridge/intel/pineview/acpi/pineview.asl> + #include <southbridge/intel/i82801gx/acpi/ich7.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> +} diff --git a/src/mainboard/intel/d510mo/hda_verb.c b/src/mainboard/intel/d510mo/hda_verb.c new file mode 100644 index 0000000..072a306 --- /dev/null +++ b/src/mainboard/intel/d510mo/hda_verb.c @@ -0,0 +1,7 @@ +#include <device/azalia_device.h> + +const u32 cim_verb_data[0] = {}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/intel/d510mo/romstage.c b/src/mainboard/intel/d510mo/romstage.c new file mode 100644 index 0000000..b469608 --- /dev/null +++ b/src/mainboard/intel/d510mo/romstage.c @@ -0,0 +1,145 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 Damien Zammit <damien(a)zamaudio.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <console/console.h> +#include <southbridge/intel/i82801gx/i82801gx.h> +#include <northbridge/intel/pineview/raminit.h> +#include <northbridge/intel/pineview/pineview.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/lapic.h> +#include <superio/winbond/w83627thg/w83627thg.h> +#include <superio/winbond/common/winbond.h> +#include <lib.h> +#include <arch/stages.h> + +#define SERIAL_DEV PNP_DEV(0x4e, W83627THG_SP1) +#define SUPERIO_DEV PNP_DEV(0x4e, 0) + +#include <cpu/intel/romstage.h> + +/* Early mainboard specific GPIO setup. + * We should use standard gpio.h eventually + */ +static void mb_gpio_init(void) +{ + device_t dev; + + /* Southbridge GPIOs. */ + dev = PCI_DEV(0x0, 0x1f, 0x0); + + /* Set the value for GPIO base address register and enable GPIO. */ + pci_write_config32(dev, GPIO_BASE, (DEFAULT_GPIOBASE | 1)); + pci_write_config8(dev, GPIO_CNTL, 0x10); + + outl(0x1ff9f7c1, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ + outl(0xe0e9e803, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ + outl(0xece9e842, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ + outl(0x00002000, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ + outl(0x000000fe, DEFAULT_GPIOBASE + 0x30); + outl(0x0000007e, DEFAULT_GPIOBASE + 0x34); + outl(0x000300f3, DEFAULT_GPIOBASE + 0x38); +} + +static void nm10_enable_lpc(void) +{ + /* Disable Serial IRQ */ + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0x00); + /* Decode range */ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, + pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x80) | 0x0010); + pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_EN, + CNF1_LPC_EN | CNF2_LPC_EN | KBC_LPC_EN | COMA_LPC_EN | COMB_LPC_EN); + + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x88, 0x0291); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8a, 0x007c); + + // Forward any IO to PCI for post codes on port 0x80 to PCI post card + //pci_write_config8(PCI_DEV(0, 30, 0), 0x4, + // pci_read_config8(PCI_DEV(0, 30, 0), 0x4) | 1); + +} + +static void rcba_config(void) +{ + /* Set up virtual channel 0 */ + RCBA32(0x0014) = 0x80000001; + RCBA32(0x001c) = 0x03128010; + + /* Device 1f interrupt pin register */ + RCBA32(0x3100) = 0x00042210; + RCBA32(0x3108) = 0x10004321; + + /* PCIe Interrupts */ + RCBA32(0x310c) = 0x00214321; + /* HD Audio Interrupt */ + RCBA32(0x3110) = 0x00000001; + + /* dev irq route register */ + RCBA16(0x3140) = 0x0132; + RCBA16(0x3142) = 0x0146; + RCBA16(0x3144) = 0x0237; + RCBA16(0x3146) = 0x3201; + RCBA16(0x3148) = 0x0146; + + /* Enable IOAPIC */ + RCBA8(0x31ff) = 0x03; + + RCBA32(0x3418) = 0x003000e2; + RCBA32(0x3418) |= 1; +} + +void main(unsigned long bist) +{ + const u8 spd_addrmap[4] = { 0x50, 0x51, 0, 0 }; + + if (bist == 0) + enable_lapic(); + + /* Disable watchdog timer */ + RCBA32(0x3410) = RCBA32(0x3410) | 0x20; + + /* Set southbridge and Super I/O GPIOs. */ + mb_gpio_init(); + + nm10_enable_lpc(); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + report_bist_failure(bist); + enable_smbus(); + + pineview_early_initialization(); + + post_code(0x30); + + printk(BIOS_DEBUG, "Start native raminit\n"); + sdram_initialize(0, spd_addrmap); + printk(BIOS_DEBUG, "Done native raminit\n"); + + post_code(0x31); + ram_check(0x200000,0x300000); + + rcba_config(); +}

1 0

Patch set updated for coreboot: northbridge/intel/pineview: Add minimal Pineview northbridge
by Damien Zammit 14 Nov '15

14 Nov '15

Damien Zammit (damien(a)zamaudio.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10073 -gerrit commit 612a3f3325b1b076f0cd35a4f4ba9a9b94b22b5d Author: Damien Zammit <damien(a)zamaudio.com> Date: Sun May 3 21:34:38 2015 +1000 northbridge/intel/pineview: Add minimal Pineview northbridge Based on i945. Tested on Intel D510MO mainboard Change-Id: I1d92a1aa6d6d767bda8379807dc26b50b9de75c9 Signed-off-by: Damien Zammit <damien(a)zamaudio.com> --- src/northbridge/intel/pineview/Kconfig | 73 ++++++++++++++++ src/northbridge/intel/pineview/Makefile.inc | 35 ++++++++ src/northbridge/intel/pineview/acpi.c | 75 ++++++++++++++++ src/northbridge/intel/pineview/bootblock.c | 22 +++++ src/northbridge/intel/pineview/pineview.h | 129 ++++++++++++++++++++++++++++ src/northbridge/intel/pineview/ram_calc.c | 62 +++++++++++++ src/northbridge/intel/pineview/udelay.c | 82 ++++++++++++++++++ 7 files changed, 478 insertions(+) diff --git a/src/northbridge/intel/pineview/Kconfig b/src/northbridge/intel/pineview/Kconfig new file mode 100644 index 0000000..4d6dcc2 --- /dev/null +++ b/src/northbridge/intel/pineview/Kconfig @@ -0,0 +1,73 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config NORTHBRIDGE_INTEL_PINEVIEW + bool + +if NORTHBRIDGE_INTEL_PINEVIEW + +config NORTHBRIDGE_SPECIFIC_OPTIONS # dummy + def_bool y + select MMCONF_SUPPORT + select MMCONF_SUPPORT_DEFAULT + #select HAVE_DEBUG_RAM_SETUP + select LAPIC_MONOTONIC_TIMER + select VGA + select PER_DEVICE_ACPI_TABLES + +config BOOTBLOCK_NORTHBRIDGE_INIT + string + default "northbridge/intel/pineview/bootblock.c" + +config VGA_BIOS_ID + string + default "8086,a001" + +config CHANNEL_XOR_RANDOMIZATION + bool + default n + +config OVERRIDE_CLOCK_DISABLE + bool + default n + help + Usually system firmware turns off system memory clock + signals to unused SO-DIMM slots to reduce EMI and power + consumption. + However, some boards do not like unused clock signals to + be disabled. + +config MAXIMUM_SUPPORTED_FREQUENCY + int + default 0 + help + If non-zero, this designates the maximum DDR frequency + the board supports, despite what the chipset should be + capable of. + +config CHECK_SLFRCS_ON_RESUME + def_bool n + help + On some boards it may be neccessary to hard reset early + during resume from S3 if the SLFRCS register indicates that + a memory channel is not guaranteed to be in self-refresh. + On other boards the check always creates a false positive, + effectively making it impossible to resume. + +endif diff --git a/src/northbridge/intel/pineview/Makefile.inc b/src/northbridge/intel/pineview/Makefile.inc new file mode 100644 index 0000000..8416342 --- /dev/null +++ b/src/northbridge/intel/pineview/Makefile.inc @@ -0,0 +1,35 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2009 coresystems GmbH +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +ifeq ($(CONFIG_NORTHBRIDGE_INTEL_PINEVIEW),y) + +ramstage-y += ram_calc.c +#ramstage-y += northbridge.c +#ramstage-y += gma.c +ramstage-y += acpi.c + +romstage-y += ram_calc.c +#romstage-y += raminit.c +#romstage-y += early_init.c +#romstage-y += errata.c +#romstage-y += debug.c + +smm-y += udelay.c + +endif diff --git a/src/northbridge/intel/pineview/acpi.c b/src/northbridge/intel/pineview/acpi.c new file mode 100644 index 0000000..b393170 --- /dev/null +++ b/src/northbridge/intel/pineview/acpi.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/acpigen.h> +#include <arch/acpi.h> +#include <cbmem.h> +#include <console/console.h> +#include <cpu/cpu.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <northbridge/intel/pineview/pineview.h> +#include <string.h> +#include <types.h> + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + device_t dev; + u32 pciexbar = 0; + u32 pciexbar_reg; + int max_buses; + + dev = dev_find_slot(0, PCI_DEVFN(0,0)); + if (!dev) + return current; + + pciexbar_reg = pci_read_config32(dev, PCIEXBAR); + + // MMCFG not supported or not enabled. + if (!(pciexbar_reg & (1 << 0))) + return current; + + switch ((pciexbar_reg >> 1) & 3) { + case 0: // 256MB + pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)); + max_buses = 256; + break; + case 1: // 128M + pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); + max_buses = 128; + break; + case 2: // 64M + pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)); + max_buses = 64; + break; + default: // RSVD + return current; + } + + if (!pciexbar) + return current; + + current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current, + pciexbar, 0x0, 0x0, max_buses - 1); + + return current; +} diff --git a/src/northbridge/intel/pineview/bootblock.c b/src/northbridge/intel/pineview/bootblock.c new file mode 100644 index 0000000..985eddd --- /dev/null +++ b/src/northbridge/intel/pineview/bootblock.c @@ -0,0 +1,22 @@ +#include <arch/io.h> +#include <northbridge/intel/pineview/pineview.h> + +static void bootblock_northbridge_init(void) +{ + uint32_t reg; + + /* + * The "io" variant of the config access is explicitly used to + * setup the PCIEXBAR because CONFIG_MMCONF_SUPPORT_DEFAULT is set to + * to true. That way all subsequent non-explicit config accesses use + * MCFG. This code also assumes that bootblock_northbridge_init() is + * the first thing called in the non-asm boot block code. The final + * assumption is that no assembly code is using the + * CONFIG_MMCONF_SUPPORT_DEFAULT option to do PCI config acceses. + * + * The PCIEXBAR is assumed to live in the memory mapped IO space under + * 4GiB. + */ + reg = CONFIG_MMCONF_BASE_ADDRESS | 4 | 1; /* 64MiB - 0-63 buses. */ + pci_io_write_config32(PCI_DEV(0,0,0), PCIEXBAR, reg); +} diff --git a/src/northbridge/intel/pineview/pineview.h b/src/northbridge/intel/pineview/pineview.h new file mode 100644 index 0000000..7bd4c44 --- /dev/null +++ b/src/northbridge/intel/pineview/pineview.h @@ -0,0 +1,129 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) Damien Zammit <damien(a)zamaudio.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef NORTHBRIDGE_INTEL_PINEVIEW_H +#define NORTHBRIDGE_INTEL_PINEVIEW_H + +/* Northbridge BARs */ +#define DEFAULT_PCIEXBAR CONFIG_MMCONF_BASE_ADDRESS /* 4 KB per PCIe device */ +#define DEFAULT_MCHBAR 0xfed14000 /* 16 KB */ +#define DEFAULT_DMIBAR 0xfed18000 /* 4 KB */ +#define DEFAULT_EPBAR 0xfed19000 /* 4 KB */ + +#include <southbridge/intel/i82801gx/i82801gx.h> + +/* Everything below this line is ignored in the DSDT */ +#ifndef __ACPI__ + +/* Device 0:0.0 PCI configuration space (Host Bridge) */ + +#define EPBAR 0x40 +#define MCHBAR 0x48 +#define PCIEXBAR 0x60 +#define DMIBAR 0x68 +#define PMIOBAR 0x78 + +#define GGC 0x52 /* GMCH Graphics Control */ + +#define DEVEN 0x54 /* Device Enable */ +#define DEVEN_D0F0 (1 << 0) +#define DEVEN_D1F0 (1 << 1) +#define DEVEN_D2F0 (1 << 3) +#define DEVEN_D2F1 (1 << 4) + +#ifndef BOARD_DEVEN +#define BOARD_DEVEN ( DEVEN_D0F0 | DEVEN_D2F0 | DEVEN_D2F1 ) +#endif /* BOARD_DEVEN */ + +#define PAM0 0x90 +#define PAM1 0x91 +#define PAM2 0x92 +#define PAM3 0x93 +#define PAM4 0x94 +#define PAM5 0x95 +#define PAM6 0x96 + +#define LAC 0x97 /* Legacy Access Control */ +#define REMAPBASE 0x98 +#define REMAPLIMIT 0x9a +#define SMRAM 0x9d /* System Management RAM Control */ +#define ESMRAM 0x9e /* Extended System Management RAM Control */ + +#define TOM 0xa0 +#define TOUUD 0xa2 +#define GBSM 0xa4 +#define BGSM 0xa8 +#define TSEGMB 0xac +#define TOLUD 0xb0 /* Top of Low Used Memory */ +#define ERRSTS 0xc8 +#define ERRCMD 0xca +#define SMICMD 0xcc +#define SCICMD 0xce +#define CGDIS 0xd8 +#define SKPAD 0xdc /* Scratchpad Data */ +#define CAPID0 0xe0 +#define DEV0T 0xf0 +#define MSLCK 0xf4 +#define MID0 0xf8 +#define DEBUP0 0xfc + +/* Device 0:1.0 PCI configuration space (PCI Express) */ + +#define BCTRL1 0x3e /* 16bit */ +#define PEGSTS 0x214 /* 32bit */ + + +/* Device 0:2.0 PCI configuration space (Graphics Device) */ + +#define GMADR 0x18 +#define GTTADR 0x1c +#define BSM 0x5c +#define GCFC 0xf0 /* Graphics Clock Frequency & Gating Control */ + + +/* + * MCHBAR + */ + +#define MCHBAR8(x) *((volatile u8 *)(DEFAULT_MCHBAR + x)) +#define MCHBAR16(x) *((volatile u16 *)(DEFAULT_MCHBAR + x)) +#define MCHBAR32(x) *((volatile u32 *)(DEFAULT_MCHBAR + x)) + +/* + * EPBAR - Egress Port Root Complex Register Block + */ + +#define EPBAR8(x) *((volatile u8 *)(DEFAULT_EPBAR + x)) +#define EPBAR16(x) *((volatile u16 *)(DEFAULT_EPBAR + x)) +#define EPBAR32(x) *((volatile u32 *)(DEFAULT_EPBAR + x)) + +/* + * DMIBAR + */ + +#define DMIBAR8(x) *((volatile u8 *)(DEFAULT_DMIBAR + x)) +#define DMIBAR16(x) *((volatile u16 *)(DEFAULT_DMIBAR + x)) +#define DMIBAR32(x) *((volatile u32 *)(DEFAULT_DMIBAR + x)) + +/* provided by mainboard code */ +void setup_ich7_gpios(void); + +#endif /* __ACPI__ */ + +#endif /* NORTHBRIDGE_INTEL_PINEVIEW_H */ diff --git a/src/northbridge/intel/pineview/ram_calc.c b/src/northbridge/intel/pineview/ram_calc.c new file mode 100644 index 0000000..d7cc732 --- /dev/null +++ b/src/northbridge/intel/pineview/ram_calc.c @@ -0,0 +1,62 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Use simple device model for this file even in ramstage */ +#define __SIMPLE_DEVICE__ + +#include <arch/io.h> +#include <cbmem.h> +#include <northbridge/intel/pineview/pineview.h> + +static unsigned long find_ramtop(void) +{ + uint32_t tom; + + if (pci_read_config8(PCI_DEV(0, 0x0, 0), DEVEN) & (DEVEN_D2F0 | DEVEN_D2F1)) { + /* IGD enabled, get top of Memory from BSM register */ + tom = pci_read_config32(PCI_DEV(0,2,0), BSM); + } else { + tom = (pci_read_config8(PCI_DEV(0,0,0), TOLUD) & 0xf7) << 24; + } + + /* if TSEG enabled subtract size */ + switch(pci_read_config8(PCI_DEV(0, 0, 0), ESMRAM) & 0x07) { + case 0x01: + /* 1MB TSEG */ + tom -= 0x100000; + break; + case 0x03: + /* 2MB TSEG */ + tom -= 0x200000; + break; + case 0x05: + /* 8MB TSEG */ + tom -= 0x800000; + break; + default: + /* TSEG either disabled or invalid */ + break; + } + return (unsigned long) tom; +} + +void *cbmem_top(void) +{ + return (void *) find_ramtop(); +} diff --git a/src/northbridge/intel/pineview/udelay.c b/src/northbridge/intel/pineview/udelay.c new file mode 100644 index 0000000..9e68512 --- /dev/null +++ b/src/northbridge/intel/pineview/udelay.c @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <delay.h> +#include <stdint.h> +#include <cpu/x86/tsc.h> +#include <cpu/x86/msr.h> +#include <cpu/intel/speedstep.h> + +/** + * Intel Core(tm) CPUs always run the TSC at the maximum possible CPU clock + */ + +void udelay(uint32_t us) +{ + uint32_t dword; + tsc_t tsc, tsc1, tscd; + msr_t msr; + uint32_t fsb = 0, divisor; + uint32_t d; /* ticks per us */ + + msr = rdmsr(MSR_FSB_FREQ); + switch (msr.lo & 0x07) { + case 5: + fsb = 400; + break; + case 1: + fsb = 533; + break; + case 3: + fsb = 667; + break; + case 2: + fsb = 800; + break; + case 0: + fsb = 1067; + break; + case 4: + fsb = 1333; + break; + case 6: + fsb = 1600; + break; + } + + msr = rdmsr(0x198); + divisor = (msr.hi >> 8) & 0x1f; + + d = (fsb * divisor) / 4; /* CPU clock is always a quarter. */ + + multiply_to_tsc(&tscd, us, d); + + tsc1 = rdtsc(); + dword = tsc1.lo + tscd.lo; + if ((dword < tsc1.lo) || (dword < tscd.lo)) { + tsc1.hi++; + } + tsc1.lo = dword; + tsc1.hi += tscd.hi; + + do { + tsc = rdtsc(); + } while ((tsc.hi < tsc1.hi) + || ((tsc.hi == tsc1.hi) && (tsc.lo < tsc1.lo))); +}

1 0

Patch set updated for coreboot: cbfstool:Fix build error with clang when comparing enum
by Zheng Bao 14 Nov '15

14 Nov '15

Zheng Bao (zheng.bao(a)amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12330 -gerrit commit e0508e3af0a4969642fe013e4a60febffa5dca79 Author: zbao <fishbaozi(a)gmail.com> Date: Thu Nov 5 14:35:57 2015 +0800 cbfstool:Fix build error with clang when comparing enum If HOSTCC=clang, the -Wtautological-constant-out-of-range-compare is set automaticaaly. That assume the value of type enum is in the defined range. Then testing if a type enum is out of range causes build error. Error: coreboot/util/cbfstool/cbfs_image.c:1387:16: error: comparison of constant 4 with expression of type 'enum vb2_hash_algorithm' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (hash_type >= CBFS_NUM_SUPPORTED_HASHES) ~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated. clang version: FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 Target: x86_64-unknown-freebsd10.2 Thread model: posix Change-Id: I3e1722bf6f9553793a9f0c7f4e790706b6938522 Signed-off-by: zbao <fishbaozi(a)gmail.com> --- util/cbfstool/cbfs_image.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/util/cbfstool/cbfs_image.c b/util/cbfstool/cbfs_image.c index 2b25011..1cfe90d 100644 --- a/util/cbfstool/cbfs_image.c +++ b/util/cbfstool/cbfs_image.c @@ -1389,7 +1389,9 @@ struct cbfs_file_attribute *cbfs_add_file_attr(struct cbfs_file *header, int cbfs_add_file_hash(struct cbfs_file *header, struct buffer *buffer, enum vb2_hash_algorithm hash_type) { - if (hash_type >= CBFS_NUM_SUPPORTED_HASHES) + uint32_t hash_index = hash_type; + + if (hash_index >= CBFS_NUM_SUPPORTED_HASHES) return -1; unsigned hash_size = widths_cbfs_hash[hash_type];

1 0

Patch set updated for coreboot: Makefile: Set HOSTCC as gcc or cc respectively
by Zheng Bao 14 Nov '15

14 Nov '15

Zheng Bao (zheng.bao(a)amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12331 -gerrit commit a1dd9af83fec00247f16b666de972099d9fa3fbe Author: zbao <fishbaozi(a)gmail.com> Date: Thu Nov 5 15:33:33 2015 +0800 Makefile: Set HOSTCC as gcc or cc respectively The HOSTCC should be set in .xcompile, which tests the existence of gcc and cc. But the .xcompile has to be included after kconfig/Makefile. So building util/kconfig uses the seperated HOSTCC definition above it, instead of the one in .xcompile. For the system which clang is the default host compiler, gcc is not installed by default. In that case, we need to set HOSTCC as cc. Change-Id: I1e51a37c4426e2c97d36a31f26a18ab4b0d0608d Signed-off-by: Zheng Bao <fishbaozi(a)gmail.com> --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 421e919..d108654 100644 --- a/Makefile +++ b/Makefile @@ -79,7 +79,7 @@ endif # Disable implicit/built-in rules to make Makefile errors fail fast. .SUFFIXES: -HOSTCC := gcc +HOSTCC := $(if $(shell type gcc 2>/dev/null), gcc, cc) HOSTCXX = g++ HOSTCFLAGS := -g HOSTCXXFLAGS := -g

1 0

Patch set updated for coreboot: Kconfig: Remove warning about format string
by Zheng Bao 14 Nov '15

14 Nov '15

Zheng Bao (zheng.bao(a)amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12366 -gerrit commit 41e10d24faa3152f4c84d2a0afa4f1a7fbdbfccb Author: Zheng Bao <fishbaozi(a)gmail.com> Date: Tue Nov 10 00:26:00 2015 +0800 Kconfig: Remove warning about format string Clang set -Wformat-security as default, which causes build waring. coreboot/util/kconfig/conf.c:79:10: warning: format string is not a string literal (potentially insecure) [-Wformat-security] printf(_("aborted!\n\n")); ^~~~~~~~~~~~~~~~~ Change-Id: I10740aea21a21db7dafa3afd065a463fac4b2df9 Signed-off-by: Zheng Bao <fishbaozi(a)gmail.com> --- util/kconfig/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/util/kconfig/Makefile b/util/kconfig/Makefile index 243f763..e916495 100644 --- a/util/kconfig/Makefile +++ b/util/kconfig/Makefile @@ -375,7 +375,7 @@ $(objk)/nconf.o: $(srck)/nconf.c $(objk)/nconf.gui.o: $(srck)/nconf.gui.c $(HOSTCC) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) -c -o $@ $< $(objk)/conf.o: $(srck)/conf.c - $(HOSTCC) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) -c -o $@ $< + $(HOSTCC) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) -Wno-format-security -c -o $@ $< $(objk)/regex.o: $(srck)/regex.c $(HOSTCC) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) -DHAVE_STRING_H -c -o $@ $<

1 0

Patch set updated for coreboot: cbfstool: clang build error when comparing enum
by Zheng Bao 14 Nov '15

14 Nov '15

Zheng Bao (zheng.bao(a)amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12330 -gerrit commit 04acd214403bbfce95bd1229644f6286c44129cb Author: zbao <fishbaozi(a)gmail.com> Date: Thu Nov 5 14:35:57 2015 +0800 cbfstool: clang build error when comparing enum If HOSTCC=clang, the -Wtautological-constant-out-of-range-compare is set automaticaaly. That assume the value of type enum is in the defined range. Then testing if a type enum is out of range causes build error. Error: coreboot/util/cbfstool/cbfs_image.c:1387:16: error: comparison of constant 4 with expression of type 'enum vb2_hash_algorithm' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (hash_type >= CBFS_NUM_SUPPORTED_HASHES) ~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated. clang version: FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 Target: x86_64-unknown-freebsd10.2 Thread model: posix Change-Id: I3e1722bf6f9553793a9f0c7f4e790706b6938522 Signed-off-by: zbao <fishbaozi(a)gmail.com> --- util/cbfstool/cbfs_image.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/util/cbfstool/cbfs_image.c b/util/cbfstool/cbfs_image.c index 2b25011..1cfe90d 100644 --- a/util/cbfstool/cbfs_image.c +++ b/util/cbfstool/cbfs_image.c @@ -1389,7 +1389,9 @@ struct cbfs_file_attribute *cbfs_add_file_attr(struct cbfs_file *header, int cbfs_add_file_hash(struct cbfs_file *header, struct buffer *buffer, enum vb2_hash_algorithm hash_type) { - if (hash_type >= CBFS_NUM_SUPPORTED_HASHES) + uint32_t hash_index = hash_type; + + if (hash_index >= CBFS_NUM_SUPPORTED_HASHES) return -1; unsigned hash_size = widths_cbfs_hash[hash_type];

1 0

Patch set updated for coreboot: Makefile: Set HOSTCC as gcc or cc respectively
by Zheng Bao 14 Nov '15

14 Nov '15

Zheng Bao (zheng.bao(a)amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12331 -gerrit commit b8ed4608ad8241ad9d43b0ca2a8b1238bebb1a2f Author: zbao <fishbaozi(a)gmail.com> Date: Thu Nov 5 15:33:33 2015 +0800 Makefile: Set HOSTCC as gcc or cc respectively The HOSTCC should be set in .xcompile, which tests the existence of gcc and cc. But the .xcompile has to be included after kconfig/Makefile. So building util/kconfig uses the seperated HOSTCC definition above it, instead of the one in .xcompile. For the system which clang is the default host compiler, gcc is not installed by default. In that case, we need to set HOSTCC as cc. Change-Id: I1e51a37c4426e2c97d36a31f26a18ab4b0d0608d Signed-off-by: Zheng Bao <fishbaozi(a)gmail.com> --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 421e919..d108654 100644 --- a/Makefile +++ b/Makefile @@ -79,7 +79,7 @@ endif # Disable implicit/built-in rules to make Makefile errors fail fast. .SUFFIXES: -HOSTCC := gcc +HOSTCC := $(if $(shell type gcc 2>/dev/null), gcc, cc) HOSTCXX = g++ HOSTCFLAGS := -g HOSTCXXFLAGS := -g

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit November 2015