coreboot-gerrit November 2015

coreboot-gerrit@coreboot.org

1 participants
1544 discussions

New patch to review for coreboot: ultra40m2: document some SMBus devices in the devicetree
by Jonathan A. Kollasch 03 Nov '15

03 Nov '15

Jonathan A. Kollasch (jakllsch(a)kollasch.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12310 -gerrit commit af43619b8b28995ff65908c2b35bc12e00cd5b8a Author: Jonathan A. Kollasch <jakllsch(a)kollasch.net> Date: Tue Nov 3 12:22:53 2015 -0600 ultra40m2: document some SMBus devices in the devicetree Change-Id: I04c37e363d48add5502b801d522e828265b87d58 Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> --- src/mainboard/sunw/ultra40m2/devicetree.cb | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/src/mainboard/sunw/ultra40m2/devicetree.cb b/src/mainboard/sunw/ultra40m2/devicetree.cb index dd28d0f..d61dd17 100644 --- a/src/mainboard/sunw/ultra40m2/devicetree.cb +++ b/src/mainboard/sunw/ultra40m2/devicetree.cb @@ -71,12 +71,25 @@ chip northbridge/amd/amdk8/root_complex # Root complex end end device pci 1.1 on # SM 1 + #chip drivers/generic/generic # PCA9556 GPIO on HDD backplanes (address conflict!) + # device i2c 18 on end + #end chip drivers/generic/generic # EMC6D103 HWM (for CPUs) device i2c 2d on end end chip drivers/generic/generic # DME1737 HWM device i2c 2e on end end + #chip drivers/generic/generic # HDD 4-7 backplane FRU 24C64 EEPROM + # device i2c 51 on end + #end + #chip drivers/generic/generic # front panel module FRU 24C64 EEPROM + # device i2c 52 on end + #end + #chip drivers/generic/generic # HDD 0-3 backplane FRU 24C64 EEPROM + # device i2c 53 on end + #end + # there are more SMbus devices on this bus end device pci 2.0 on end # USB 1.1 device pci 2.1 on end # USB 2

1 0

New patch to review for coreboot: ultra40m2: initialize hardware monitor and fan control
by Jonathan A. Kollasch 03 Nov '15

03 Nov '15

Jonathan A. Kollasch (jakllsch(a)kollasch.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12309 -gerrit commit c8a900fb9cac2b39ab4a5ef6ab1f260564beda79 Author: Jonathan A. Kollasch <jakllsch(a)kollasch.net> Date: Tue Nov 3 12:19:35 2015 -0600 ultra40m2: initialize hardware monitor and fan control Change-Id: I3fbb897feb68d899e5dec075a09d0dd605eca5ce Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> --- src/mainboard/sunw/ultra40m2/devicetree.cb | 6 ++ src/mainboard/sunw/ultra40m2/mainboard.c | 156 ++++++++++++++++++++++++++++- 2 files changed, 159 insertions(+), 3 deletions(-) diff --git a/src/mainboard/sunw/ultra40m2/devicetree.cb b/src/mainboard/sunw/ultra40m2/devicetree.cb index bf89fee..dd28d0f 100644 --- a/src/mainboard/sunw/ultra40m2/devicetree.cb +++ b/src/mainboard/sunw/ultra40m2/devicetree.cb @@ -71,6 +71,12 @@ chip northbridge/amd/amdk8/root_complex # Root complex end end device pci 1.1 on # SM 1 + chip drivers/generic/generic # EMC6D103 HWM (for CPUs) + device i2c 2d on end + end + chip drivers/generic/generic # DME1737 HWM + device i2c 2e on end + end end device pci 2.0 on end # USB 1.1 device pci 2.1 on end # USB 2 diff --git a/src/mainboard/sunw/ultra40m2/mainboard.c b/src/mainboard/sunw/ultra40m2/mainboard.c index 1f26995..2018be9 100644 --- a/src/mainboard/sunw/ultra40m2/mainboard.c +++ b/src/mainboard/sunw/ultra40m2/mainboard.c @@ -15,15 +15,165 @@ * GNU General Public License for more details. */ +#include <arch/io.h> #include <console/console.h> #include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> +#include <device/pnp_def.h> +#include <device/smbus.h> +#include <stdlib.h> +#include <superio/smsc/dme1737/dme1737.h> +static void emc6d103_init(void) +{ + size_t i; + int reg; + + static const struct { uint8_t idx; uint8_t msk; uint8_t set; } script[] = { + { 0x7f, 0x7f, 0x80 }, // INIT + { 0x4f, 0x00, 0x64 }, // Diode 1 High 100°C + { 0x53, 0x00, 0x64 }, // Diode 2 High 100°C (Sun firmware didn't set this) + { 0x54, 0x00, 0x30 }, // Tach1 Minimum LSB + { 0x55, 0x00, 0x2a }, // Tach1 Minimum MSB + { 0x56, 0x00, 0x30 }, // Tach2 Minimum LSB + { 0x57, 0x00, 0x2a }, // Tach2 Minimum MSB + { 0x5c, 0x00, 0x02 }, // PWM 1 Config + { 0x5d, 0x00, 0x42 }, // PWM 2 Config + { 0x5f, 0x00, 0x8a }, // Zone 1 range, Fan 1 freq + { 0x60, 0x00, 0xca }, // Zone 2 range, Fan 2 freq + { 0x61, 0x00, 0x8a }, // Zone 3 range, Fan 3 freq + { 0x62, 0x00, 0x67 }, // Min/Off, PWM 1 ramp rate + { 0x63, 0x00, 0x70 }, // PWM 2, PWM 3 ramp rate + { 0x64, 0x00, 0x59 }, // PWM1 Minimum Duty Cycle + { 0x65, 0x00, 0x59 }, // PWM2 Minimum Duty Cycle + { 0x67, 0x00, 0x47 }, // Zone 1 Low Temp Limit + { 0x69, 0x00, 0x47 }, // Zone 3 Low Temp Limit + { 0x80, 0x00, 0x07 }, // Interrupt Enable 2 + { 0x40, 0xfe, 0x01 }, // START + }; + + struct device * const dev = dev_find_slot_on_smbus(2, 0x2d); + if (dev == NULL) { + printk(BIOS_WARNING, "EMC6D103 not found\n"); + } + + printk(BIOS_SPEW, "%s EMC6D103 id: %x %x\n", __func__, smbus_read_byte(dev, 0x3e), smbus_read_byte(dev, 0x3f)); + + for (i = 0; i < ARRAY_SIZE(script); i++) { + reg = smbus_read_byte(dev, script[i].idx); + if (reg < 0) { + goto fail; + } + reg &= script[i].msk; + reg |= script[i].set; + reg = smbus_write_byte(dev, script[i].idx, reg & 0xff); + if (reg < 0) { + goto fail; + } + } + + return; + +fail: + printk(BIOS_WARNING, "failed to initialize EMC6D103\n"); +} + +/* set up DME1737 runtime registers for FAN/PWM 5/6 */ +static void dme1737_runtime_init(void) +{ + size_t i; + uint8_t reg; + + static const struct { uint8_t idx; uint8_t msk; uint8_t set; } rttab[] = { + { 0x43, 0xf3, 0x08 }, + { 0x44, 0xf0, 0x08 }, + { 0x45, 0xf3, 0x08 }, + { 0x46, 0xf0, 0x08 }, + }; + + /* find DME1737 runtime device (LDN 10) */ + struct device * const dev = dev_find_slot_pnp(0x2e, DME1737_RT); + if (dev == NULL) + return; + + struct resource * const res = find_resource(dev, PNP_IDX_IO0); + if (res == NULL) + return; + + for (i = 0; i < ARRAY_SIZE(rttab); i++) { + reg = inb(res->base + rttab[i].idx); + reg &= rttab[i].msk; + reg |= rttab[i].set; + outb(reg, res->base + rttab[i].idx); + } +} + +static void dme1737_hwm_init(void) +{ + size_t i; + int reg; + + static const struct { uint8_t idx; uint8_t msk; uint8_t set; } script[] = { + //{ 0x7f, 0x7f, 0x80 }, // INIT + { 0x4f, 0x00, 0x32 }, // High + { 0x54, 0x00, 0x30 }, // Tach0 Minimum LSB + { 0x55, 0x00, 0x2a }, // Tach0 Minimum MSB + { 0x56, 0x00, 0x30 }, // Tach1 Minimum LSB + { 0x57, 0x00, 0x2a }, // Tach1 Minimum MSB + { 0x5a, 0x00, 0x30 }, // Tach3 Minimum LSB + { 0x5b, 0x00, 0x2a }, // Tach3 Minimum MSB + { 0x5d, 0x00, 0x07 }, // PWM 1 Config: Zone 0 + { 0x5f, 0x0f, 0x50 }, // Zone 0 range, PWM freq + { 0x62, 0x00, 0x67 }, // Ramp Rate + { 0x63, 0x00, 0x80 }, // Ramp Rate + { 0x65, 0x00, 0x0d }, // PWM 1 Minimum + { 0x67, 0x00, 0x23 }, // Zone 0 Low + { 0x6a, 0x00, 0x32 }, // Zone 0 High + { 0x6c, 0x00, 0x5a }, // Zone 2 Abs + { 0x80, 0x00, 0x17 }, // Interrupt Enable 2? + { 0xa5, 0x00, 0x40 }, // PMW 4: 25% duty + { 0xa6, 0x00, 0x40 }, // PWM 5: 25% duty + { 0x40, 0xfe, 0x01 }, // START + }; + + struct device * const dev = dev_find_slot_on_smbus(2, 0x2e); + if (dev == NULL) { + printk(BIOS_INFO, "SMBus DME1737 not found\n"); + return; + } + + printk(BIOS_SPEW, "%s DME1737 id: %x %x\n", __func__, smbus_read_byte(dev, 0x3e), smbus_read_byte(dev, 0x3f)); + + for (i = 0; i < ARRAY_SIZE(script); i++) { + reg = smbus_read_byte(dev, script[i].idx); + if (reg < 0) { + goto fail; + } + reg &= script[i].msk; + reg |= script[i].set; + reg = smbus_write_byte(dev, script[i].idx, reg & 0xff); + if (reg < 0) { + goto fail; + } + } + + return; + +fail: + printk(BIOS_WARNING, "failed to initialize EMC6D103\n"); +} + +static void mainboard_init(device_t dev) +{ + emc6d103_init(); + dme1737_runtime_init(); + dme1737_hwm_init(); + + printk(BIOS_DEBUG, "%s done\n", __func__); +} static void mainboard_enable(device_t dev) { + dev->ops->init = mainboard_init; } struct chip_operations mainboard_ops = {

1 0

New patch to review for coreboot: ultra40m2: fix Conventional PCI interrupts
by Jonathan A. Kollasch 03 Nov '15

03 Nov '15

Jonathan A. Kollasch (jakllsch(a)kollasch.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12308 -gerrit commit 8d7dbec4f06413ba6220f8d213ea57753afb6bc1 Author: Jonathan A. Kollasch <jakllsch(a)kollasch.net> Date: Tue Nov 3 12:10:28 2015 -0600 ultra40m2: fix Conventional PCI interrupts Change-Id: I768dfe24fce042879eb4662f549e36f6bcd89c70 Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> --- src/mainboard/sunw/ultra40m2/mptable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/mainboard/sunw/ultra40m2/mptable.c b/src/mainboard/sunw/ultra40m2/mptable.c index d000b1a..c120af7 100644 --- a/src/mainboard/sunw/ultra40m2/mptable.c +++ b/src/mainboard/sunw/ultra40m2/mptable.c @@ -130,7 +130,7 @@ static void *smp_write_config_table(void *v) dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 6 , 0)); if (dev && dev->enabled) { for (i = 0; i < 4; i++) - apicpin[i] = 0x10 + (2+i)%4; + apicpin[i] = 0x10 + (0+i)%4; smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55, apicpin); } }

1 0

New patch to review for coreboot: ultra40m2: enable on-board IEEE1394 OHCI
by Jonathan A. Kollasch 03 Nov '15

03 Nov '15

Jonathan A. Kollasch (jakllsch(a)kollasch.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12307 -gerrit commit 1975ddc763cca470073c4da4f7032cdeac4eafe9 Author: Jonathan A. Kollasch <jakllsch(a)kollasch.net> Date: Tue Nov 3 12:09:50 2015 -0600 ultra40m2: enable on-board IEEE1394 OHCI Change-Id: Ibac950d9bcf7210f616398393c68f6d1b22565b8 Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> --- src/mainboard/sunw/ultra40m2/romstage.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/mainboard/sunw/ultra40m2/romstage.c b/src/mainboard/sunw/ultra40m2/romstage.c index d225f59..8fc8304 100644 --- a/src/mainboard/sunw/ultra40m2/romstage.c +++ b/src/mainboard/sunw/ultra40m2/romstage.c @@ -62,7 +62,8 @@ static inline int spd_read_byte(unsigned device, unsigned address) RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+61, 0xf0, 0x05,/* GPIO62 Firewire OHCI disable (active low)? */ #include <southbridge/nvidia/mcp55/early_setup_ss.h> #include "southbridge/nvidia/mcp55/early_setup_car.c"

1 0

New patch to review for coreboot: ultra40m2: move NVRAM variable out of the century byte
by Jonathan A. Kollasch 03 Nov '15

03 Nov '15

Jonathan A. Kollasch (jakllsch(a)kollasch.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12306 -gerrit commit e47adc80ef86e0d33e4326e3d9727d0bf043d2f3 Author: Jonathan A. Kollasch <jakllsch(a)kollasch.net> Date: Tue Nov 3 10:45:45 2015 -0600 ultra40m2: move NVRAM variable out of the century byte Change-Id: Iaa531328ec2732ce9805d70be59dec3107265177 Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> --- src/mainboard/sunw/ultra40m2/cmos.layout | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/mainboard/sunw/ultra40m2/cmos.layout b/src/mainboard/sunw/ultra40m2/cmos.layout index 23fd413..97345ab 100644 --- a/src/mainboard/sunw/ultra40m2/cmos.layout +++ b/src/mainboard/sunw/ultra40m2/cmos.layout @@ -26,7 +26,7 @@ entries 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock 399 1 e 2 multi_core -400 1 e 1 power_on_after_fail +408 1 e 1 power_on_after_fail 412 4 e 6 debug_level 440 4 e 9 slow_cpu 444 1 e 1 nmi

1 0

New patch to review for coreboot: ultra40m2: PCI SERR NMI crash workaround
by Jonathan A. Kollasch 03 Nov '15

03 Nov '15

Jonathan A. Kollasch (jakllsch(a)kollasch.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12305 -gerrit commit 4b79850e3c9bba0a26df6365553d49502d70b786 Author: Jonathan A. Kollasch <jakllsch(a)kollasch.net> Date: Tue Nov 3 10:31:17 2015 -0600 ultra40m2: PCI SERR NMI crash workaround Change-Id: Ie399927bc7da07d84f3f0cf98aeb597b4916ad5e Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> --- src/device/pci_device.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/src/device/pci_device.c b/src/device/pci_device.c index 5123229..20cf1ed 100644 --- a/src/device/pci_device.c +++ b/src/device/pci_device.c @@ -625,6 +625,11 @@ void pci_bus_enable_resources(struct device *dev) ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL); ctrl |= dev->link_list->bridge_ctrl; ctrl |= (PCI_BRIDGE_CTL_PARITY + PCI_BRIDGE_CTL_SERR); /* Error check. */ +#if IS_ENABLED(CONFIG_BOARD_SUNW_ULTRA40M2) + if (strcmp(dev_path(dev), "PCI: 00:06.0") == 0) { + ctrl &= ~PCI_BRIDGE_CTL_SERR; + } +#endif printk(BIOS_DEBUG, "%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);

1 0

New patch to review for coreboot: Initial Sun Ultra 40 M2 board port
by Jonathan A. Kollasch 03 Nov '15

03 Nov '15

Jonathan A. Kollasch (jakllsch(a)kollasch.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12304 -gerrit commit 768b4b09bb4593f1a16e572c8f10b56ca93c614b Author: Jonathan A. Kollasch <jakllsch(a)kollasch.net> Date: Tue Nov 3 10:06:38 2015 -0600 Initial Sun Ultra 40 M2 board port Change-Id: I5b62ade908ffeb80e22f14edbe4c1ec04880bd30 Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> --- src/mainboard/sunw/ultra40m2/Kconfig | 18 +++--- src/mainboard/sunw/ultra40m2/Kconfig.name | 4 +- src/mainboard/sunw/ultra40m2/board_info.txt | 7 ++- src/mainboard/sunw/ultra40m2/devicetree.cb | 89 ++++++----------------------- src/mainboard/sunw/ultra40m2/resourcemap.c | 6 +- src/mainboard/sunw/ultra40m2/romstage.c | 11 +--- 6 files changed, 44 insertions(+), 91 deletions(-) diff --git a/src/mainboard/sunw/ultra40m2/Kconfig b/src/mainboard/sunw/ultra40m2/Kconfig index b5e51c5..2913ae8 100644 --- a/src/mainboard/sunw/ultra40m2/Kconfig +++ b/src/mainboard/sunw/ultra40m2/Kconfig @@ -1,4 +1,4 @@ -if BOARD_NVIDIA_L1_2PVV +if BOARD_SUNW_ULTRA40M2 config BOARD_SPECIFIC_OPTIONS # dummy def_bool y @@ -10,19 +10,19 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HT_CHAIN_DISTRIBUTE select MCP55_USE_NIC select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627EHG + select SUPERIO_SMSC_DME1737 select PARALLEL_CPU_INIT select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE select HAVE_MP_TABLE select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 + select BOARD_ROMSIZE_KB_1024 select QRANK_DIMM_SUPPORT select K8_ALLOCATE_IO_RANGE config MAINBOARD_DIR string - default nvidia/l1_2pvv + default sunw/ultra40m2 config DCACHE_RAM_BASE hex @@ -46,7 +46,7 @@ config MCP55_NUM config MAINBOARD_PART_NUMBER string - default "l1_2pvv" + default "Ultra 40 M2" config MAX_CPUS int @@ -70,6 +70,10 @@ config IRQ_SLOT_COUNT config MCP55_PCI_E_X_0 int - default 2 + default 1 + +config MCP55_PCI_E_X_1 + int + default 1 -endif # BOARD_NVIDIA_L1_2PVV +endif # BOARD_SUNW_ULTRA40M2 diff --git a/src/mainboard/sunw/ultra40m2/Kconfig.name b/src/mainboard/sunw/ultra40m2/Kconfig.name index 40dffc6..f6bc551 100644 --- a/src/mainboard/sunw/ultra40m2/Kconfig.name +++ b/src/mainboard/sunw/ultra40m2/Kconfig.name @@ -1,2 +1,2 @@ -config BOARD_NVIDIA_L1_2PVV - bool "l1_2pvv" +config BOARD_SUNW_ULTRA40M2 + bool "Ultra 40 M2" diff --git a/src/mainboard/sunw/ultra40m2/board_info.txt b/src/mainboard/sunw/ultra40m2/board_info.txt index b351b8e..b68555c 100644 --- a/src/mainboard/sunw/ultra40m2/board_info.txt +++ b/src/mainboard/sunw/ultra40m2/board_info.txt @@ -1 +1,6 @@ -Category: eval +Board URL: http://docs.oracle.com/cd/E19127-01/ultra40.ws/820-0123-13/intro.html +Board name: Ultra 40 M2 +Category: desktop +ROM package: PLCC +ROM protocol: LPC +ROM socketed: y diff --git a/src/mainboard/sunw/ultra40m2/devicetree.cb b/src/mainboard/sunw/ultra40m2/devicetree.cb index 5709db7..bf89fee 100644 --- a/src/mainboard/sunw/ultra40m2/devicetree.cb +++ b/src/mainboard/sunw/ultra40m2/devicetree.cb @@ -5,66 +5,44 @@ chip northbridge/amd/amdk8/root_complex # Root complex end end device domain 0 on # PCI domain - subsystemid 0x1022 0x2b80 inherit + subsystemid 0x108e 0x6676 inherit chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 + device pci 18.0 on end # Link 0 == LDT 0 + device pci 18.0 on # Link 1 == LDT 1 chip southbridge/nvidia/mcp55 # Southbridge device pci 0.0 on end # HT device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O + chip superio/smsc/dme1737 # Super I/O device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 2e.1 off # Parallel port + device pnp 2e.3 off # Parallel port io 0x60 = 0x378 irq 0x70 = 7 + drq 0x74 = 2 end - device pnp 2e.2 on # Com1 + device pnp 2e.4 on # COM1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.3 off # Com2 + device pnp 2e.5 off # COM2 io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.5 on # PS/2 keyboard & mouse + device pnp 2e.7 on # PS/2 (connectors not populated) io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.207 off # MIDI - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 off # GPIO 5 - end - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 + device pnp 2e.a on + io 0x60 = 0x600 end end + # There's also an Akom AK2001 7-segment port 0x80 decoder on + # and Infineon SLB9635TT12 TPM on this LPC bus. end device pci 1.1 on # SM 0 chip drivers/generic/generic # DIMM 0-0-0 @@ -93,41 +71,17 @@ chip northbridge/amd/amdk8/root_complex # Root complex end end device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end end device pci 2.0 on end # USB 1.1 device pci 2.1 on end # USB 2 device pci 4.0 on end # IDE device pci 5.0 on end # SATA 0 device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 + device pci 5.2 off end # SATA 2 device pci 6.0 on end # PCI device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC + device pci 8.0 off end # NIC + device pci 9.0 off end # NIC device pci a.0 on end # PCI E 5 device pci b.0 off end # PCI E 4 device pci c.0 off end # PCI E 3 @@ -137,12 +91,8 @@ chip northbridge/amd/amdk8/root_complex # Root complex register "ide0_enable" = "1" register "sata0_enable" = "1" register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" end end - device pci 18.0 on end # Link 1 device pci 18.0 on # Link 2 == LDT 2 chip southbridge/nvidia/mcp55 # Southbridge device pci 0.0 on end # HT @@ -153,7 +103,7 @@ chip northbridge/amd/amdk8/root_complex # Root complex device pci 4.0 off end # IDE device pci 5.0 on end # SATA 0 device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 + device pci 5.2 off end # SATA 2 device pci 6.0 off end # PCI device pci 6.1 off end # AZA device pci 8.0 on end # NIC @@ -162,14 +112,11 @@ chip northbridge/amd/amdk8/root_complex # Root complex device pci b.0 off end # PCI E 4 device pci c.0 off end # PCI E 3 device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 + device pci e.0 off end # PCI E 1 device pci f.0 on end # PCI E 0 register "ide0_enable" = "1" register "sata0_enable" = "1" register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" end end device pci 18.1 on end diff --git a/src/mainboard/sunw/ultra40m2/resourcemap.c b/src/mainboard/sunw/ultra40m2/resourcemap.c index 2950687..e46a253 100644 --- a/src/mainboard/sunw/ultra40m2/resourcemap.c +++ b/src/mainboard/sunw/ultra40m2/resourcemap.c @@ -17,6 +17,7 @@ static void setup_mb_resource_map(void) { +#if 0 static const unsigned int register_values[] = { /* Careful set limit registers before base registers which contain the enables */ /* DRAM Limit i Registers @@ -194,7 +195,7 @@ static void setup_mb_resource_map(void) * This field defines the end of PCI I/O region n * [31:25] Reserved */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, +// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007010, // PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff020, // need to talk to ANALOG of second CK804 to release PCI E reset PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, @@ -265,7 +266,7 @@ static void setup_mb_resource_map(void) * [31:24] Bus Number Limit i * This field defines the highest bus number in configuration region i */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */ +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000103, /* link 1 of cpu 0 --> Nvidia MCP55 Pro */ // PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of cpu 0 --> nvidia io55 */ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, @@ -275,4 +276,5 @@ static void setup_mb_resource_map(void) int max; max = ARRAY_SIZE(register_values); setup_resource_map(register_values, max); +#endif } diff --git a/src/mainboard/sunw/ultra40m2/romstage.c b/src/mainboard/sunw/ultra40m2/romstage.c index 4186cc7..d225f59 100644 --- a/src/mainboard/sunw/ultra40m2/romstage.c +++ b/src/mainboard/sunw/ultra40m2/romstage.c @@ -32,14 +32,13 @@ #include "lib/delay.c" #include <cpu/x86/lapic.h> #include "northbridge/amd/amdk8/reset_test.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> +#include <superio/smsc/dme1737/dme1737.h> #include <cpu/x86/bist.h> #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/setup_resource_map.c" #include "southbridge/nvidia/mcp55/early_ctrl.c" -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) +#define SERIAL_DEV PNP_DEV(0x2e, DME1737_SP1) static void memreset(int controllers, const struct mem_controller *ctrl) { } static void activate_spd_rom(const struct mem_controller *ctrl) { } @@ -114,13 +113,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) if (bist == 0) bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - pnp_enter_ext_func_mode(SERIAL_DEV); - pnp_write_config(SERIAL_DEV, 0x24, 0); - pnp_exit_ext_func_mode(SERIAL_DEV); - setup_mb_resource_map(); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + dme1737_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init(); /* Halt if there was a built in self test failure */

1 0

New patch to review for coreboot: copy mainboard/nvidia/l1_2pvv to mainboard/sunw/ultra40m2
by Jonathan A. Kollasch 03 Nov '15

03 Nov '15

Jonathan A. Kollasch (jakllsch(a)kollasch.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12303 -gerrit commit 5593db3c58413e80a42bd0e22c86df60d5cacdab Author: Jonathan A. Kollasch <jakllsch(a)kollasch.net> Date: Fri Oct 30 18:15:55 2015 -0500 copy mainboard/nvidia/l1_2pvv to mainboard/sunw/ultra40m2 Change-Id: Ia275a697caa73168553b5d588d54df651e0539d7 Signed-off-by: Jonathan A. Kollasch <jakllsch(a)kollasch.net> --- src/mainboard/sunw/ultra40m2/Kconfig | 75 ++++++++ src/mainboard/sunw/ultra40m2/Kconfig.name | 2 + src/mainboard/sunw/ultra40m2/board_info.txt | 1 + src/mainboard/sunw/ultra40m2/cmos.layout | 78 ++++++++ src/mainboard/sunw/ultra40m2/devicetree.cb | 180 ++++++++++++++++++ src/mainboard/sunw/ultra40m2/get_bus_conf.c | 137 ++++++++++++++ src/mainboard/sunw/ultra40m2/hda_verb.c | 68 +++++++ src/mainboard/sunw/ultra40m2/irq_tables.c | 125 +++++++++++++ src/mainboard/sunw/ultra40m2/mainboard.c | 31 ++++ src/mainboard/sunw/ultra40m2/mb_sysconf.h | 29 +++ src/mainboard/sunw/ultra40m2/mptable.c | 174 +++++++++++++++++ src/mainboard/sunw/ultra40m2/resourcemap.c | 278 ++++++++++++++++++++++++++++ src/mainboard/sunw/ultra40m2/romstage.c | 189 +++++++++++++++++++ 13 files changed, 1367 insertions(+) diff --git a/src/mainboard/sunw/ultra40m2/Kconfig b/src/mainboard/sunw/ultra40m2/Kconfig new file mode 100644 index 0000000..b5e51c5 --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/Kconfig @@ -0,0 +1,75 @@ +if BOARD_NVIDIA_L1_2PVV + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_F + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_NVIDIA_MCP55 + select HT_CHAIN_DISTRIBUTE + select MCP55_USE_NIC + select MCP55_USE_AZA + select SUPERIO_WINBOND_W83627EHG + select PARALLEL_CPU_INIT + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select LIFT_BSP_APIC_ID + select BOARD_ROMSIZE_KB_512 + select QRANK_DIMM_SUPPORT + select K8_ALLOCATE_IO_RANGE + +config MAINBOARD_DIR + string + default nvidia/l1_2pvv + +config DCACHE_RAM_BASE + hex + default 0xc8000 + +config DCACHE_RAM_SIZE + hex + default 0x08000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config MEM_TRAIN_SEQ + int + default 1 + +config MCP55_NUM + int + default 2 + +config MAINBOARD_PART_NUMBER + string + default "l1_2pvv" + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config IRQ_SLOT_COUNT + int + default 11 + +config MCP55_PCI_E_X_0 + int + default 2 + +endif # BOARD_NVIDIA_L1_2PVV diff --git a/src/mainboard/sunw/ultra40m2/Kconfig.name b/src/mainboard/sunw/ultra40m2/Kconfig.name new file mode 100644 index 0000000..40dffc6 --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_NVIDIA_L1_2PVV + bool "l1_2pvv" diff --git a/src/mainboard/sunw/ultra40m2/board_info.txt b/src/mainboard/sunw/ultra40m2/board_info.txt new file mode 100644 index 0000000..b351b8e --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/board_info.txt @@ -0,0 +1 @@ +Category: eval diff --git a/src/mainboard/sunw/ultra40m2/cmos.layout b/src/mainboard/sunw/ultra40m2/cmos.layout new file mode 100644 index 0000000..23fd413 --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/cmos.layout @@ -0,0 +1,78 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +entries + +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +456 1 e 1 ECC_memory +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/sunw/ultra40m2/devicetree.cb b/src/mainboard/sunw/ultra40m2/devicetree.cb new file mode 100644 index 0000000..5709db7 --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/devicetree.cb @@ -0,0 +1,180 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x1022 0x2b80 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.106 off # Serial flash interface (SFI) + io 0x60 = 0x100 + end + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.207 off # MIDI + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off # WDTO#, PLED + end + device pnp 2e.009 off # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 off # GPIO 5 + end + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on # Link 2 == LDT 2 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on end # LPC + device pci 1.1 on end # SM 0 + device pci 2.0 off end # USB 1.1 + device pci 2.1 off end # USB 2 + device pci 4.0 off end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 off end # PCI + device pci 6.1 off end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/sunw/ultra40m2/get_bus_conf.c b/src/mainboard/sunw/ultra40m2/get_bus_conf.c new file mode 100644 index 0000000..c70cbec --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/get_bus_conf.c @@ -0,0 +1,137 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/multicore.h> + +#include <cpu/amd/amdk8_sysconf.h> + +#include <stdlib.h> +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +unsigned pci1234x[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +unsigned hcdnx[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + + + + +static unsigned get_bus_conf_done = 0; + +static unsigned get_hcid(unsigned i) +{ + unsigned id = 0; + + unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; + + unsigned devn = sysconf.hcdn[i] & 0xff; + + device_t dev; + + dev = dev_find_slot(busn, PCI_DEVFN(devn,0)); + + switch (dev->device) { + case 0x0369: //IO55 + id = 4; + break; + } + + // we may need more way to find out hcid: subsystem id? GPIO read ? + + // we need use id for 1. bus num, 2. mptable, 3. acpi table + + return id; +} + +void get_bus_conf(void) +{ + unsigned apicid_base; + struct mb_sysconf_t *m; + + int i; + + if (get_bus_conf_done) + return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + memset(m, 0, sizeof(struct mb_sysconf_t)); + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + + m->sbdnb = (sysconf.hcdn[1] & 0xff); // first byte of second chain + + m->bus_mcp55 = (sysconf.pci1234[0] >> 16) & 0xff; + + /* MCP55b */ + for (i = 1; i < sysconf.hc_possible_num; i++) { + if (!(sysconf.pci1234[i] & 0x0f)) + continue; + // check hcid type here + sysconf.hcid[i] = get_hcid(i); + if (!sysconf.hcid[i]) + continue; //unknown co processor + + m->bus_mcp55b = (sysconf.pci1234[1]>>16) & 0xff; + } + +/*I/O APICs: APIC ID Version State Address*/ + if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) + apicid_base = get_apicid_base(2); + else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + m->apicid_mcp55 = apicid_base+0; + m->apicid_mcp55b = apicid_base+1; +} diff --git a/src/mainboard/sunw/ultra40m2/hda_verb.c b/src/mainboard/sunw/ultra40m2/hda_verb.c new file mode 100644 index 0000000..31052f2 --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/hda_verb.c @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Tyan Computer + * Copyright (C) 2006-2007 AMD + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0880, // Codec Vendor / Device ID: Realtek ALC880 + 0x00000000, // Subsystem ID + 0x0000000d, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x0000e601 */ + AZALIA_SUBVENDOR(0x0, 0x0000e601), + + /* NID 0x14, FRONT-OUT-L/R */ + AZALIA_PIN_CFG(0x0, 0x14, 0x01014410), + + /* NID 0x15, SURR-OUT-L/R */ + AZALIA_PIN_CFG(0x0, 0x15, 0x01011412), + + /* NID 0x16, CEN/LFE-OUT */ + AZALIA_PIN_CFG(0x0, 0x16, 0x01016011), + + /* NID 0x17, SIDE-SURR-L/R */ + AZALIA_PIN_CFG(0x0, 0x17, 0x01012014), + + /* NID 0x18, MIC1-L/R, VREFO */ + AZALIA_PIN_CFG(0x0, 0x18, 0x01a19c30), + + /* NID 0x19, MIC2-L/R, VREFO */ + AZALIA_PIN_CFG(0x0, 0x19, 0x02a19c40), + + /* NID 0x1a, LINE1-L/R, VREFO */ + AZALIA_PIN_CFG(0x0, 0x1a, 0x01813431), + + /* NID 0x1b, LINE2-L/R, VREFO */ + AZALIA_PIN_CFG(0x0, 0x1b, 0x0221441f), + + /* NID 0x1c, CD-L/R / GND */ + AZALIA_PIN_CFG(0x0, 0x1c, 0x411111f0), + + /* NID 0x1d, PCBEEP */ + AZALIA_PIN_CFG(0x0, 0x1d, 0x9983013e), + + /* NID 0x1e, S/PDIF-OUT */ + AZALIA_PIN_CFG(0x0, 0x1e, 0x01454120), + + /* NID 0x1f, S/PDIF-IN */ + AZALIA_PIN_CFG(0x0, 0x1f, 0x01c59150), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/sunw/ultra40m2/irq_tables.c b/src/mainboard/sunw/ultra40m2/irq_tables.c new file mode 100644 index 0000000..d643cd4 --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/irq_tables.c @@ -0,0 +1,125 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> +#include "mb_sysconf.h" + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + struct mb_sysconf_t *m; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + m = sysconf.mb; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_mcp55; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0370; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, m->bus_mcp55, ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + for (i = 1; i < sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; + + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + } + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/sunw/ultra40m2/mainboard.c b/src/mainboard/sunw/ultra40m2/mainboard.c new file mode 100644 index 0000000..1f26995 --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/mainboard.c @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * Copyright (C) 2010 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> + + +static void mainboard_enable(device_t dev) +{ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/sunw/ultra40m2/mb_sysconf.h b/src/mainboard/sunw/ultra40m2/mb_sysconf.h new file mode 100644 index 0000000..64837f6 --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/mb_sysconf.h @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_mcp55; + unsigned char bus_mcp55b; + unsigned apicid_mcp55; + unsigned apicid_mcp55b; + unsigned sbdnb; +}; + +#endif diff --git a/src/mainboard/sunw/ultra40m2/mptable.c b/src/mainboard/sunw/ultra40m2/mptable.c new file mode 100644 index 0000000..d000b1a --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/mptable.c @@ -0,0 +1,174 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> +#include "mb_sysconf.h" + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + struct mb_sysconf_t *m; + unsigned sbdn; + int i, j, bus_isa; + unsigned char apicpin[4]; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + m = sysconf.mb; + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) + smp_write_ioapic(mc, m->apicid_mcp55, 0x11, + res2mmio(res, 0, 0)); + + /* Initialize interrupt mapping*/ + dword = pci_read_config32(dev, 0x74); + dword &= ~(1<<15); + dword |= 1<<2; + pci_write_config32(dev, 0x74, dword); + + dword = 0x43c6c643; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0xd00012d2; + pci_write_config32(dev, 0x84, dword); + + } + + if (m->bus_mcp55b) { + dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) + smp_write_ioapic(mc, m->apicid_mcp55b, 0x11, + res2mmio(res, 0, 0)); + + dword = 0x43c60000; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x81000000; + pci_write_config32(dev, 0x80, dword); + + dword = 0xd00002d0; + pci_write_config32(dev, 0x84, dword); + + } + + } + + } + + mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); // 10 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55, ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 + +//Slot PCIE + for (j = 2; j < 8; j++) { + device_t dev; + dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 0x0a + j - 2 , 0)); + if (!dev || !dev->enabled) + continue; + for (i = 0; i < 4; i++) + apicpin[i] = 0x10 + (2+j+i+4-sbdn%4)%4; + smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55, apicpin); + } + +//Slot PCI 32 + { + device_t dev; + dev = dev_find_slot(m->bus_mcp55, PCI_DEVFN(sbdn + 6 , 0)); + if (dev && dev->enabled) { + for (i = 0; i < 4; i++) + apicpin[i] = 0x10 + (2+i)%4; + smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55, apicpin); + } + } + + if (m->bus_mcp55b) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|0, m->apicid_mcp55b, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|1, m->apicid_mcp55b, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+5)<<2)|2, m->apicid_mcp55b, 0x15); // 21 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+8)<<2)|0, m->apicid_mcp55b, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55b, ((m->sbdnb+9)<<2)|0, m->apicid_mcp55b, 0x15); // 21 + + + //Slot PCIE + for (j = 2; j < 8; j++) { + device_t dev; + dev = dev_find_slot(m->bus_mcp55b, PCI_DEVFN(m->sbdnb + 0x0a + j - 2 , 0)); + if (!dev || !dev->enabled) + continue; + for (i = 0; i < 4; i++) { + apicpin[i] = 0x10 + (2+j+i+4-m->sbdnb%4)%4; + } + smp_write_intsrc_pci_bridge(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, dev, m->apicid_mcp55b, apicpin); + } + + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/sunw/ultra40m2/resourcemap.c b/src/mainboard/sunw/ultra40m2/resourcemap.c new file mode 100644 index 0000000..2950687 --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/resourcemap.c @@ -0,0 +1,278 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, +// PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff020, // need to talk to ANALOG of second CK804 to release PCI E reset + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, +// PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */ +// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of cpu 0 --> nvidia io55 */ + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/sunw/ultra40m2/romstage.c b/src/mainboard/sunw/ultra40m2/romstage.c new file mode 100644 index 0000000..4186cc7 --- /dev/null +++ b/src/mainboard/sunw/ultra40m2/romstage.c @@ -0,0 +1,189 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu <yinghailu(a)amd.com> for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <lib.h> +#include <spd.h> +#include <cpu/amd/model_fxx_rev.h> +#include "southbridge/nvidia/mcp55/early_smbus.c" +#include <northbridge/amd/amdk8/raminit.h> +#include "lib/delay.c" +#include <cpu/x86/lapic.h> +#include "northbridge/amd/amdk8/reset_test.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627ehg/w83627ehg.h> +#include <cpu/x86/bist.h> +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/nvidia/mcp55/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include <northbridge/amd/amdk8/f.h> +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" + +#define MCP55_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ + +#include <southbridge/nvidia/mcp55/early_setup_ss.h> +#include "southbridge/nvidia/mcp55/early_setup_car.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + uint32_t dword; + uint8_t byte; + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr [] = { + // Node 0 + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, + // Node 1 + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, + }; + + struct sys_info *sysinfo = &sysinfo_car; + int needs_reset = 0; + unsigned bsp_apicid = 0; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + sio_setup(); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + pnp_enter_ext_func_mode(SERIAL_DEV); + pnp_write_config(SERIAL_DEV, 0x24, 0); + pnp_exit_ext_func_mode(SERIAL_DEV); + + setup_mb_resource_map(); + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + + printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); + + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram + setup_coherent_ht_domain(); // routing table and start other core0 + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + +#if CONFIG_SET_FIDVID + { + msr_t msr; + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); + } + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); + } +#endif + + init_timer(); /* Need to use TMICT to synchronize FID/VID. */ + + needs_reset |= optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= mcp55_early_setup_x(); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + printk(BIOS_INFO, "ht reset -\n"); + soft_reset(); + } + allow_all_aps_stop(bsp_apicid); + + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + + /* all ap stopped? */ + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now +}

1 0

New patch to review for coreboot: mainboard/asus: F2A85-M PRO: switch superIO
by Denis Carikli 03 Nov '15

03 Nov '15

Denis Carikli (GNUtoo(a)no-log.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12302 -gerrit commit e0a5a92f1a14ba8d7ce9e829a9f73d0a179243e7 Author: Denis 'GNUtoo' Carikli <GNUtoo(a)no-log.org> Date: Thu Jul 30 19:41:57 2015 +0200 mainboard/asus: F2A85-M PRO: switch superIO Change-Id: Ifa799b5e66ef4b93d464bfeccca27165e82b966b Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo(a)no-log.org> --- src/mainboard/asus/f2a85-m_pro/Kconfig | 2 +- src/mainboard/asus/f2a85-m_pro/devicetree.cb | 50 ++-------- src/mainboard/asus/f2a85-m_pro/romstage.c | 140 ++++++++++++++++++++++++++- 3 files changed, 147 insertions(+), 45 deletions(-) diff --git a/src/mainboard/asus/f2a85-m_pro/Kconfig b/src/mainboard/asus/f2a85-m_pro/Kconfig index b437ed6..4353444 100644 --- a/src/mainboard/asus/f2a85-m_pro/Kconfig +++ b/src/mainboard/asus/f2a85-m_pro/Kconfig @@ -29,7 +29,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_PIRQ_TABLE select HAVE_MP_TABLE select HAVE_ACPI_TABLES - select SUPERIO_ITE_IT8728F + select SUPERIO_NUVOTON_NCT6779D select BOARD_ROMSIZE_KB_8192 select GFXUMA select HUDSON_DISABLE_IMC diff --git a/src/mainboard/asus/f2a85-m_pro/devicetree.cb b/src/mainboard/asus/f2a85-m_pro/devicetree.cb index 4562557..bde400e 100644 --- a/src/mainboard/asus/f2a85-m_pro/devicetree.cb +++ b/src/mainboard/asus/f2a85-m_pro/devicetree.cb @@ -2,6 +2,7 @@ # This file is part of the coreboot project. # # Copyright (C) 2012 Advanced Micro Devices, Inc. +# Copyright (C) 2015 Denis 'GNUtoo' Carikli <gnutoo(a)no-log.org> # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -56,56 +57,19 @@ chip northbridge/amd/agesa/family15tn/root_complex chip drivers/generic/generic #dimm 1 device i2c 51 on end # 7-bit SPD address end - end # SM + end # SMBUS device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x439d - chip superio/ite/it8728f - register hwm_ctl_register = "0xc0" - register hwm_main_ctl_register = "0x33" - register hwm_adc_temp_chan_en_reg = "0x38" - register hwm_fan1_ctl_pwm = "0x00" - register hwm_fan2_ctl_pwm = "0x00" - register hwm_fan3_ctl_pwm = "0x00" - - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 + chip superio/nuvoton/nct6779d + device pnp 2e.2 on # Com1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Env Controller - io 0x60 = 0x290 - io 0x62 = 0x220 - irq 0x70 = 0 + device pnp 2e.a on # ACPI + irq 0xe7 = 0x10 end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 off # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x60 = 0x228 #SMI - io 0x62 = 0x300 #Simple I/O - io 0x64 = 0x238 #Phony resource IT8603E does not have it - irq 0x70 = 0 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8728f + end end #device pci 14.3 # LPC device pci 14.4 on end # PCI 0x4384 device pci 14.5 on end # USB 2 diff --git a/src/mainboard/asus/f2a85-m_pro/romstage.c b/src/mainboard/asus/f2a85-m_pro/romstage.c index 0062c87..feeec61 100644 --- a/src/mainboard/asus/f2a85-m_pro/romstage.c +++ b/src/mainboard/asus/f2a85-m_pro/romstage.c @@ -1 +1,139 @@ -#include "../f2a85-m/romstage.c" +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2012 Rudolf Marek <r.marek(a)assembler.cz> + * Copyright (C) 2015 Denis 'GNUtoo' Carikli <gnutoo(a)no-log.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <northbridge/amd/agesa/agesawrapper.h> + +#include <arch/acpi.h> +#include <arch/cpu.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <cbmem.h> +#include <console/console.h> +#include <cpu/amd/agesa/s3_resume.h> +#include <cpu/amd/car.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/lapic.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <device/pnp_def.h> +#include <southbridge/amd/agesa/hudson/hudson.h> +#include <southbridge/amd/agesa/hudson/smbus.h> +#include <stdint.h> +#include <string.h> +#include <superio/nuvoton/common/nuvoton.h> +#include <superio/nuvoton/nct6779d/nct6779d.h> + +#define MMIO_NON_POSTED_START 0xfed00000 +#define MMIO_NON_POSTED_END 0xfedfffff +#define SB_MMIO 0xFED80000 +#define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x)) + +#define SERIAL_DEV PNP_DEV(0x2e, NCT6779D_SP1) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + u8 byte; + device_t dev; + +#if IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE) + hudson_pci_port80(); +#endif +#if IS_ENABLED(CONFIG_POST_DEVICE_LPC) + hudson_lpc_port80(); +#endif + + amd_initmmio(); + + if (!cpu_init_detectedx && boot_cpu()) { + + /* enable SIO LPC decode */ + dev = PCI_DEV(0, 0x14, 3); + byte = pci_read_config8(dev, 0x48); + byte |= 3; /* 2e, 2f */ + pci_write_config8(dev, 0x48, byte); + + /* enable serial decode */ + byte = pci_read_config8(dev, 0x44); + byte |= (1 << 6); /* 0x3f8 */ + pci_write_config8(dev, 0x44, byte); + + post_code(0x30); + + /* enable SB MMIO space */ + outb(0x24, 0xcd6); + outb(0x1, 0xcd7); + + post_code(0x30); + // TODO: SB SuperIO init ? + + post_code(0x31); + nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* turn on secondary smbus at b20 */ + outb(0x28, 0xcd6); + byte = inb(0xcd7); + byte |= 1; + outb(byte, 0xcd7); + + /* set DDR3 voltage */ + byte = CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL; + + /* default is byte = 0x0, so no need to set it in this case */ + if (byte) + do_smbus_write_byte(0xb20, 0x15, 0x3, byte); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + post_code(0x37); + agesawrapper_amdinitreset(); + post_code(0x39); + + agesawrapper_amdinitearly(); + int s3resume = acpi_is_wakeup_s3(); + if (!s3resume) { + post_code(0x40); + agesawrapper_amdinitpost(); + post_code(0x41); + agesawrapper_amdinitenv(); + disable_cache_as_ram(); + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + agesawrapper_amdinitresume(); + amd_initcpuio(); + agesawrapper_amds3laterestore(); + + post_code(0x61); + prepare_for_resume(); + } + + post_code(0x50); + copy_and_run(); + + post_code(0x54); /* Should never see this post code. */ +}

1 0

New patch to review for coreboot: mainboard/asus: Add F2A85-M PRO variant to F2A85-M.
by Denis Carikli 03 Nov '15

03 Nov '15

Denis Carikli (GNUtoo(a)no-log.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12301 -gerrit commit f229f757f4022a59311b53484c7599a0cf019257 Author: Denis 'GNUtoo' Carikli <GNUtoo(a)no-log.org> Date: Sun Jul 26 19:57:51 2015 +0200 mainboard/asus: Add F2A85-M PRO variant to F2A85-M. Change-Id: I78389dc1fd19a2354daec0484042940cf8b490ae Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo(a)no-log.org> --- src/mainboard/asus/f2a85-m_pro/BiosCallOuts.c | 1 + src/mainboard/asus/f2a85-m_pro/Kconfig | 93 ++++++++++++++ src/mainboard/asus/f2a85-m_pro/Kconfig.name | 2 + src/mainboard/asus/f2a85-m_pro/Makefile.inc | 26 ++++ src/mainboard/asus/f2a85-m_pro/OptionsIds.h | 1 + src/mainboard/asus/f2a85-m_pro/PlatformGnbPcie.c | 1 + .../asus/f2a85-m_pro/PlatformGnbPcieComplex.h | 1 + src/mainboard/asus/f2a85-m_pro/acpi/AmdImc.asl | 1 + src/mainboard/asus/f2a85-m_pro/acpi/cpstate.asl | 1 + src/mainboard/asus/f2a85-m_pro/acpi/gpe.asl | 1 + src/mainboard/asus/f2a85-m_pro/acpi/mainboard.asl | 1 + src/mainboard/asus/f2a85-m_pro/acpi/routing.asl | 1 + src/mainboard/asus/f2a85-m_pro/acpi/sata.asl | 1 + src/mainboard/asus/f2a85-m_pro/acpi/si.asl | 1 + src/mainboard/asus/f2a85-m_pro/acpi/sleep.asl | 1 + src/mainboard/asus/f2a85-m_pro/acpi/superio.asl | 1 + src/mainboard/asus/f2a85-m_pro/acpi/thermal.asl | 1 + src/mainboard/asus/f2a85-m_pro/acpi/usb_oc.asl | 1 + src/mainboard/asus/f2a85-m_pro/acpi_tables.c | 1 + src/mainboard/asus/f2a85-m_pro/board_info.txt | 7 ++ src/mainboard/asus/f2a85-m_pro/buildOpts.c | 1 + src/mainboard/asus/f2a85-m_pro/cmos.layout | 79 ++++++++++++ src/mainboard/asus/f2a85-m_pro/devicetree.cb | 136 +++++++++++++++++++++ src/mainboard/asus/f2a85-m_pro/dsdt.asl | 1 + src/mainboard/asus/f2a85-m_pro/irq_tables.c | 1 + src/mainboard/asus/f2a85-m_pro/mainboard.c | 1 + src/mainboard/asus/f2a85-m_pro/mptable.c | 1 + src/mainboard/asus/f2a85-m_pro/romstage.c | 1 + 28 files changed, 365 insertions(+) diff --git a/src/mainboard/asus/f2a85-m_pro/BiosCallOuts.c b/src/mainboard/asus/f2a85-m_pro/BiosCallOuts.c new file mode 100644 index 0000000..afa69bb --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/BiosCallOuts.c @@ -0,0 +1 @@ +#include "../f2a85-m/BiosCallOuts.c" diff --git a/src/mainboard/asus/f2a85-m_pro/Kconfig b/src/mainboard/asus/f2a85-m_pro/Kconfig new file mode 100644 index 0000000..b437ed6 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/Kconfig @@ -0,0 +1,93 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# Copyright (C) 2012 Rudolf Marek <r.marek(a)assembler.cz> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc. +# + +if BOARD_ASUS_F2A85_M_PRO + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_FAMILY15_TN + select NORTHBRIDGE_AMD_AGESA_FAMILY15_TN + select SOUTHBRIDGE_AMD_AGESA_HUDSON + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_TABLES + select SUPERIO_ITE_IT8728F + select BOARD_ROMSIZE_KB_8192 + select GFXUMA + select HUDSON_DISABLE_IMC + +choice + prompt "DDR3 memory voltage" + default BOARD_ASUS_F2A85_M_PRO_DDR3_VOLT_150 + +config BOARD_ASUS_F2A85_M_PRO_DDR3_VOLT_135 + bool "1.35V" + help + Set DRR3 memory voltage to 1.35V +config BOARD_ASUS_F2A85_M_PRO_DDR3_VOLT_150 + bool "1.50V" + help + Set DRR3 memory voltage to 1.50V +config BOARD_ASUS_F2A85_M_PRO_DDR3_VOLT_165 + bool "1.65V" + help + Set DRR3 memory voltage to 1.65V +endchoice + +config BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL + hex + default 0x9e if BOARD_ASUS_F2A85_M_PRO_DDR3_VOLT_135 + default 0x0 if BOARD_ASUS_F2A85_M_PRO_DDR3_VOLT_150 + default 0x1e if BOARD_ASUS_F2A85_M_PRO_DDR3_VOLT_165 + +config MAINBOARD_DIR + string + default asus/f2a85-m_pro + +config MAINBOARD_PART_NUMBER + string + default "F2A85-M_PRO" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS_ID + string + default "1002,9993" + +endif # BOARD_ASUS_F2A85_M_PRO diff --git a/src/mainboard/asus/f2a85-m_pro/Kconfig.name b/src/mainboard/asus/f2a85-m_pro/Kconfig.name new file mode 100644 index 0000000..e4b8dfd --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_ASUS_F2A85_M_PRO + bool "F2A85-M PRO" diff --git a/src/mainboard/asus/f2a85-m_pro/Makefile.inc b/src/mainboard/asus/f2a85-m_pro/Makefile.inc new file mode 100644 index 0000000..0008d6d --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/Makefile.inc @@ -0,0 +1,26 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc. +# + +romstage-y += buildOpts.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/asus/f2a85-m_pro/OptionsIds.h b/src/mainboard/asus/f2a85-m_pro/OptionsIds.h new file mode 100644 index 0000000..c702a9c --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/OptionsIds.h @@ -0,0 +1 @@ +#include "../f2a85-m/OptionsIds.h" diff --git a/src/mainboard/asus/f2a85-m_pro/PlatformGnbPcie.c b/src/mainboard/asus/f2a85-m_pro/PlatformGnbPcie.c new file mode 100644 index 0000000..d83a779 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/PlatformGnbPcie.c @@ -0,0 +1 @@ +#include "../f2a85-m/PlatformGnbPcie.c" diff --git a/src/mainboard/asus/f2a85-m_pro/PlatformGnbPcieComplex.h b/src/mainboard/asus/f2a85-m_pro/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..f6f4c9a --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/PlatformGnbPcieComplex.h @@ -0,0 +1 @@ +#include "../f2a85-m/PlatformGnbPcieComplex.h" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi/AmdImc.asl b/src/mainboard/asus/f2a85-m_pro/acpi/AmdImc.asl new file mode 100644 index 0000000..43c2428 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi/AmdImc.asl @@ -0,0 +1 @@ +#include "../../f2a85-m/acpi/AmdImc.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi/cpstate.asl b/src/mainboard/asus/f2a85-m_pro/acpi/cpstate.asl new file mode 100644 index 0000000..29c8d69 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi/cpstate.asl @@ -0,0 +1 @@ +#include "../../f2a85-m/acpi/cpstate.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi/gpe.asl b/src/mainboard/asus/f2a85-m_pro/acpi/gpe.asl new file mode 100644 index 0000000..4794311 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi/gpe.asl @@ -0,0 +1 @@ +#include "../../f2a85-m/acpi/gpe.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi/mainboard.asl b/src/mainboard/asus/f2a85-m_pro/acpi/mainboard.asl new file mode 100644 index 0000000..f81742e --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi/mainboard.asl @@ -0,0 +1 @@ +#include "../../f2a85-m/acpi/mainboard.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi/routing.asl b/src/mainboard/asus/f2a85-m_pro/acpi/routing.asl new file mode 100644 index 0000000..77a1f8a --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi/routing.asl @@ -0,0 +1 @@ +#include "../../f2a85-m/acpi/routing.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi/sata.asl b/src/mainboard/asus/f2a85-m_pro/acpi/sata.asl new file mode 100644 index 0000000..46bc2e6 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi/sata.asl @@ -0,0 +1 @@ +#include "../../f2a85-m/acpi/sata.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi/si.asl b/src/mainboard/asus/f2a85-m_pro/acpi/si.asl new file mode 100644 index 0000000..208e5c4 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi/si.asl @@ -0,0 +1 @@ +#include "../../f2a85-m/acpi/si.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi/sleep.asl b/src/mainboard/asus/f2a85-m_pro/acpi/sleep.asl new file mode 100644 index 0000000..67e4e2b --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi/sleep.asl @@ -0,0 +1 @@ +#include "../../f2a85-m/acpi/sleep.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi/superio.asl b/src/mainboard/asus/f2a85-m_pro/acpi/superio.asl new file mode 100644 index 0000000..88a494d --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi/superio.asl @@ -0,0 +1 @@ +#include "../../f2a85-m/acpi/superio.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi/thermal.asl b/src/mainboard/asus/f2a85-m_pro/acpi/thermal.asl new file mode 100644 index 0000000..3d529e5 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi/thermal.asl @@ -0,0 +1 @@ +#include "../../f2a85-m/acpi/thermal.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi/usb_oc.asl b/src/mainboard/asus/f2a85-m_pro/acpi/usb_oc.asl new file mode 100644 index 0000000..1b3fba0 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi/usb_oc.asl @@ -0,0 +1 @@ +include "../../f2a85-m/acpi/usb_oc.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/acpi_tables.c b/src/mainboard/asus/f2a85-m_pro/acpi_tables.c new file mode 100644 index 0000000..febb723 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/acpi_tables.c @@ -0,0 +1 @@ +#include "../f2a85-m/acpi_tables.c" diff --git a/src/mainboard/asus/f2a85-m_pro/board_info.txt b/src/mainboard/asus/f2a85-m_pro/board_info.txt new file mode 100644 index 0000000..52c5819 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/board_info.txt @@ -0,0 +1,7 @@ +Category: desktop +Board URL: http://www.asus.com/Motherboards/F2A85M_PRO/ +ROM package: DIP8 +ROM protocol: SPI +ROM socketed: y +Flashrom support: y +Release year: diff --git a/src/mainboard/asus/f2a85-m_pro/buildOpts.c b/src/mainboard/asus/f2a85-m_pro/buildOpts.c new file mode 100644 index 0000000..c9fc086 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/buildOpts.c @@ -0,0 +1 @@ +#include "../f2a85-m/buildOpts.c" diff --git a/src/mainboard/asus/f2a85-m_pro/cmos.layout b/src/mainboard/asus/f2a85-m_pro/cmos.layout new file mode 100644 index 0000000..50750a8 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/cmos.layout @@ -0,0 +1,79 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc. +#***************************************************************************** + +entries + +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +456 1 e 1 ECC_memory +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/f2a85-m_pro/devicetree.cb b/src/mainboard/asus/f2a85-m_pro/devicetree.cb new file mode 100644 index 0000000..4562557 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/devicetree.cb @@ -0,0 +1,136 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc. +# +chip northbridge/amd/agesa/family15tn/root_complex + + device cpu_cluster 0 on + chip cpu/amd/agesa/family15tn + device lapic 10 on end + end + end + + device domain 0 on + subsystemid 0x1022 0x1410 inherit + chip northbridge/amd/agesa/family15tn # CPU side of HT root complex + + chip northbridge/amd/agesa/family15tn # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x99XX + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIE SLOT0 x16 blue + device pci 3.0 off end # unused? + device pci 4.0 on end # PCIE 4x black + device pci 5.0 off end # unused? + device pci 6.0 off end # unused? + device pci 7.0 off end # LAN + device pci 8.0 off end # NB/SB Link P2P bridge + end #chip northbridge/amd/agesa/family15tn # PCI side of HT root complex + + chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 + device pci 10.1 on end # XHCI HC1 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SMBUS + chip drivers/generic/generic #dimm 0 + device i2c 50 on end # 7-bit SPD address + end + chip drivers/generic/generic #dimm 1 + device i2c 51 on end # 7-bit SPD address + end + end # SM + device pci 14.1 off end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/ite/it8728f + register hwm_ctl_register = "0xc0" + register hwm_main_ctl_register = "0x33" + register hwm_adc_temp_chan_en_reg = "0x38" + register hwm_fan1_ctl_pwm = "0x00" + register hwm_fan2_ctl_pwm = "0x00" + register hwm_fan3_ctl_pwm = "0x00" + + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Env Controller + io 0x60 = 0x290 + io 0x62 = 0x220 + irq 0x70 = 0 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 off # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0x228 #SMI + io 0x62 = 0x300 #Simple I/O + io 0x64 = 0x238 #Phony resource IT8603E does not have it + irq 0x70 = 0 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8728f + end #device pci 14.3 # LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # USB 2 + device pci 14.6 off end # Gec + device pci 14.7 off end # SD + device pci 15.0 on end # PCIe 0 - onboard PCIe 1x + device pci 15.1 on end # PCIe 1 onboard gigabit + device pci 15.2 off end # unused + device pci 15.3 off end # unused + + end #chip southbridge/amd/hudson + + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + + register "spdAddrLookup" = " + { + { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family15tn # CPU side of HT root complex + end #domain +end #chip northbridge/amd/agesa/family15tn/root_complex diff --git a/src/mainboard/asus/f2a85-m_pro/dsdt.asl b/src/mainboard/asus/f2a85-m_pro/dsdt.asl new file mode 100644 index 0000000..b27b81d --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/dsdt.asl @@ -0,0 +1 @@ +#include "../f2a85-m/dsdt.asl" diff --git a/src/mainboard/asus/f2a85-m_pro/irq_tables.c b/src/mainboard/asus/f2a85-m_pro/irq_tables.c new file mode 100644 index 0000000..7e6c693 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/irq_tables.c @@ -0,0 +1 @@ +#include "../f2a85-m/irq_tables.c" diff --git a/src/mainboard/asus/f2a85-m_pro/mainboard.c b/src/mainboard/asus/f2a85-m_pro/mainboard.c new file mode 100644 index 0000000..d8cc9c8 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/mainboard.c @@ -0,0 +1 @@ +#include "../f2a85-m/mainboard.c" diff --git a/src/mainboard/asus/f2a85-m_pro/mptable.c b/src/mainboard/asus/f2a85-m_pro/mptable.c new file mode 100644 index 0000000..1d0784d --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/mptable.c @@ -0,0 +1 @@ +#include <mainboard/asus/f2a85-m/mptable.c> diff --git a/src/mainboard/asus/f2a85-m_pro/romstage.c b/src/mainboard/asus/f2a85-m_pro/romstage.c new file mode 100644 index 0000000..0062c87 --- /dev/null +++ b/src/mainboard/asus/f2a85-m_pro/romstage.c @@ -0,0 +1 @@ +#include "../f2a85-m/romstage.c"

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit November 2015