coreboot-gerrit November 2013

coreboot-gerrit@coreboot.org

1 participants
856 discussions

Patch set updated for coreboot: 12bf7dd Remove MRC variables from 2065x CAR init.
by Vladimir Serbinenko 20 Nov '13

20 Nov '13

Vladimir Serbinenko (phcoder(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4080 -gerrit commit 12bf7dddb9d7acd63dc8dbe565d8db82c7d2dba0 Author: Vladimir Serbinenko <phcoder(a)gmail.com> Date: Thu Nov 14 18:49:26 2013 +0100 Remove MRC variables from 2065x CAR init. 2065x boards don't use MRC. And the space in question isn't used either. Read number of variable range MTRRs from MSR rather than hardcoding it. 2ff is still zeroed out as unless you zero-out undocumented bits as well boot fails. Tested on Lenovo X201. Change-Id: Ic574193094e7d27c2d6a4d7d3e387d989578532e Signed-off-by: Vladimir Serbinenko <phcoder(a)gmail.com> --- src/cpu/intel/model_2065x/cache_as_ram.inc | 64 ++++++++++-------------------- 1 file changed, 22 insertions(+), 42 deletions(-) diff --git a/src/cpu/intel/model_2065x/cache_as_ram.inc b/src/cpu/intel/model_2065x/cache_as_ram.inc index ec7335e..dce0e39 100644 --- a/src/cpu/intel/model_2065x/cache_as_ram.inc +++ b/src/cpu/intel/model_2065x/cache_as_ram.inc @@ -27,11 +27,6 @@ #define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE #define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE -/* Cache 4GB - MRC_SIZE_KB for MRC */ -#define CACHE_MRC_BYTES ((CONFIG_CACHE_MRC_SIZE_KB << 10) - 1) -#define CACHE_MRC_BASE (0xFFFFFFFF - CACHE_MRC_BYTES) -#define CACHE_MRC_MASK (~CACHE_MRC_BYTES) - #define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1) #define NoEvictMod_MSR 0x2e0 @@ -54,7 +49,14 @@ wait_for_sipi: jc wait_for_sipi post_code(0x21) - /* Zero out all fixed range and variable range MTRRs. */ + /* Clean-up MTRRdefType_MSR. */ + movl $MTRRdefType_MSR, %ecx + xorl %eax, %eax + xorl %edx, %edx + wrmsr + + post_code(0x22) + /* Zero out all fixed range MTRRs. */ movl $mtrr_table, %esi movl $((mtrr_table_end - mtrr_table) / 2), %edi xorl %eax, %eax @@ -67,12 +69,20 @@ clear_mtrrs: dec %edi jnz clear_mtrrs - post_code(0x22) - /* Configure the default memory type to uncacheable. */ - movl $MTRRdefType_MSR, %ecx + /* Zero out all variable range MTRRs. */ + movl $MTRRcap_MSR, %ecx rdmsr - andl $(~0x00000cff), %eax + andl $0xff, %eax + shl $1, %eax + movl %eax, %edi + movl $0x200, %ecx + xorl %eax, %eax + xorl %edx, %edx +clear_var_mtrrs: wrmsr + add $1, %ecx + dec %edi + jnz clear_var_mtrrs post_code(0x23) /* Set Cache-as-RAM base address. */ @@ -147,17 +157,6 @@ clear_mtrrs: wrmsr post_code(0x27) -#if CONFIG_CACHE_MRC_BIN - /* Enable caching for ram init code to run faster */ - movl $MTRRphysBase_MSR(2), %ecx - movl $(CACHE_MRC_BASE | MTRR_TYPE_WRPROT), %eax - xorl %edx, %edx - wrmsr - movl $MTRRphysMask_MSR(2), %ecx - movl $(CACHE_MRC_MASK | MTRRphysMaskValid), %eax - movl $CPU_PHYSMASK_HI, %edx - wrmsr -#endif post_code(0x28) /* Enable cache. */ @@ -165,9 +164,8 @@ clear_mtrrs: andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax movl %eax, %cr0 - /* Set up the stack pointer below MRC variable space. */ - movl $(CACHE_AS_RAM_SIZE + CACHE_AS_RAM_BASE - \ - CONFIG_DCACHE_RAM_MRC_VAR_SIZE - 4 - 4096), %eax + /* Set up the stack pointer below the end of CAR. */ + movl $(CACHE_AS_RAM_SIZE + CACHE_AS_RAM_BASE - 4), %eax movl %eax, %esp /* Restore the BIST result. */ @@ -212,16 +210,6 @@ before_romstage: andl $~1, %eax wrmsr -#if CONFIG_CACHE_MRC_BIN - /* Clear MTRR that was used to cache MRC */ - xorl %eax, %eax - xorl %edx, %edx - movl $MTRRphysBase_MSR(2), %ecx - wrmsr - movl $MTRRphysMask_MSR(2), %ecx - wrmsr -#endif - post_code(0x33) /* Enable cache. */ @@ -321,18 +309,10 @@ __main: jmp .Lhlt mtrr_table: - .word 0x02FF - /* Fixed MTRRs */ .word 0x250, 0x258, 0x259 .word 0x268, 0x269, 0x26A .word 0x26B, 0x26C, 0x26D .word 0x26E, 0x26F - - /* Variable MTRRs */ - .word 0x200, 0x201, 0x202, 0x203 - .word 0x204, 0x205, 0x206, 0x207 - .word 0x208, 0x209, 0x20A, 0x20B - .word 0x20C, 0x20D, 0x20E, 0x20F mtrr_table_end:

1 0

Patch set updated for coreboot: 16d4907 bochs: add support for native graphics
by Ronald G. Minnich 20 Nov '13

20 Nov '13

Ronald G. Minnich (rminnich(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4258 -gerrit commit 16d490792216bfe5c6d75e147763f6f00eb07510 Author: Ronald G. Minnich <rminnich(a)google.com> Date: Tue Nov 19 17:42:41 2013 -0800 bochs: add support for native graphics This is an attempt to make native graphics work in the x86 qemu mainboards. It's basically right code-wise, and it builds, and we get no graphics in qemu. Change-Id: I66188f61e1bac7ad93c989cc10f3e0b55140e148 Signed-off-by: Ronald G. Minnich <rminnich(a)google.com> --- src/drivers/emulation/qemu/bochs.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/src/drivers/emulation/qemu/bochs.c b/src/drivers/emulation/qemu/bochs.c index 1fd7e28..4242285 100644 --- a/src/drivers/emulation/qemu/bochs.c +++ b/src/drivers/emulation/qemu/bochs.c @@ -1,4 +1,6 @@ +#include <stdint.h> #include <delay.h> +#include <edid.h> #include <stdlib.h> #include <string.h> #include <arch/io.h> @@ -81,6 +83,8 @@ static void bochs_init(device_t dev) printk(BIOS_DEBUG, "QEMU VGA: framebuffer @ %x (pci bar %d)\n", addr, bar); + if (!addr) + return; /* setup video mode */ bochs_write(VBE_DISPI_INDEX_ENABLE, 0); bochs_write(VBE_DISPI_INDEX_BANK, 0); @@ -95,8 +99,16 @@ static void bochs_init(device_t dev) VBE_DISPI_ENABLED | VBE_DISPI_LFB_ENABLED); outb(0x20, 0x3c0); /* disable blanking */ +#if CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT + struct edid edid; + edid.ha = width; + edid.va = height; + edid.bpp = 32; + set_vbe_mode_info_valid(&edid, addr); +#endif } +#if !CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT int vbe_mode_info_valid(void); int vbe_mode_info_valid(void) { @@ -123,6 +135,7 @@ void fill_lb_framebuffer(struct lb_framebuffer *framebuffer) framebuffer->reserved_mask_pos = 24; framebuffer->reserved_mask_size = 8; } +#endif static struct device_operations qemu_graph_ops = { .read_resources = pci_dev_read_resources,

1 0

Patch set updated for coreboot: 823db56 Add Intel FSP northbridge support Sandybridge and Ivybridge
by Marc Jones 20 Nov '13

20 Nov '13

Marc Jones (marc.jones(a)se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4015 -gerrit commit 823db56d54165569ca21503c5aae77c139a41323 Author: Marc Jones <marc.jones(a)se-eng.com> Date: Tue Oct 29 17:57:30 2013 -0600 Add Intel FSP northbridge support Sandybridge and Ivybridge Add support for Sandybridge and Ivybridge using the Intel FSP. The FSP is different enough to warrant its own source files. This source handle the majority of FSP interaction. "Intel® Firmware Support Package (Intel® FSP) provides key programming information for initializing Intel® silicon and can be easily integrated into a boot loader of the developer’s choice. It is easy to adopt, scalable to design, reduces time-to-market, and is economical to build." http://www.intel.com/content/www/us/en/intelligent-systems/intel-firmware-s… Change-Id: Ib879c6b0fbf2eb1cbf929a87f592df29ac48bcc5 Signed-off-by: Marc Jones <marc.jones(a)se-eng.com> --- src/include/cbmem.h | 1 + src/northbridge/intel/Kconfig | 1 + src/northbridge/intel/Makefile.inc | 2 + src/northbridge/intel/fsp_sandybridge/Kconfig | 122 +++++ src/northbridge/intel/fsp_sandybridge/Makefile.inc | 58 +++ src/northbridge/intel/fsp_sandybridge/acpi.c | 202 ++++++++ .../intel/fsp_sandybridge/acpi/hostbridge.asl | 361 +++++++++++++++ src/northbridge/intel/fsp_sandybridge/acpi/igd.asl | 324 +++++++++++++ .../intel/fsp_sandybridge/acpi/sandybridge.asl | 59 +++ src/northbridge/intel/fsp_sandybridge/chip.h | 42 ++ src/northbridge/intel/fsp_sandybridge/early_init.c | 88 ++++ src/northbridge/intel/fsp_sandybridge/finalize.c | 56 +++ src/northbridge/intel/fsp_sandybridge/fsp_util.c | 413 +++++++++++++++++ src/northbridge/intel/fsp_sandybridge/fsp_util.h | 88 ++++ src/northbridge/intel/fsp_sandybridge/gma.c | 88 ++++ src/northbridge/intel/fsp_sandybridge/gma.h | 168 +++++++ src/northbridge/intel/fsp_sandybridge/mrccache.c | 257 +++++++++++ .../intel/fsp_sandybridge/northbridge.c | 437 ++++++++++++++++++ .../intel/fsp_sandybridge/northbridge.h | 245 ++++++++++ src/northbridge/intel/fsp_sandybridge/raminit.c | 84 ++++ src/northbridge/intel/fsp_sandybridge/raminit.h | 25 + .../intel/fsp_sandybridge/report_platform.c | 114 +++++ src/northbridge/intel/fsp_sandybridge/udelay.c | 55 +++ src/vendorcode/Kconfig | 1 + src/vendorcode/Makefile.inc | 1 + src/vendorcode/intel/Kconfig | 22 + src/vendorcode/intel/Makefile.inc | 24 + .../intel/fsp/ivybridge_bd82x6x/include/fspapi.h | 63 +++ .../intel/fsp/ivybridge_bd82x6x/include/fspffs.h | 507 +++++++++++++++++++++ .../intel/fsp/ivybridge_bd82x6x/include/fspfv.h | 247 ++++++++++ .../intel/fsp/ivybridge_bd82x6x/include/fsphob.h | 507 +++++++++++++++++++++ .../fsp/ivybridge_bd82x6x/include/fspinfoheader.h | 62 +++ .../fsp/ivybridge_bd82x6x/include/fspplatform.h | 64 +++ .../intel/fsp/ivybridge_bd82x6x/include/fsptypes.h | 121 +++++ .../fsp/ivybridge_bd82x6x/include/mem_config.h | 132 ++++++ .../intel/fsp/ivybridge_bd82x6x/include/peifsp.h | 43 ++ .../intel/fsp/ivybridge_bd82x6x/srx/fsphob.c | 207 +++++++++ 37 files changed, 5291 insertions(+) diff --git a/src/include/cbmem.h b/src/include/cbmem.h index b3d3fff..0c32111 100644 --- a/src/include/cbmem.h +++ b/src/include/cbmem.h @@ -73,6 +73,7 @@ #define CBMEM_ID_EHCI_DEBUG 0xe4c1deb9 #define CBMEM_ID_NONE 0x00000000 #define CBMEM_ID_AGESA_RUNTIME 0x41474553 +#define CBMEM_ID_HOB_POINTER 0x484f4221 #ifndef __ASSEMBLER__ #include <stdint.h> diff --git a/src/northbridge/intel/Kconfig b/src/northbridge/intel/Kconfig index a20f7b0..c57f25d 100644 --- a/src/northbridge/intel/Kconfig +++ b/src/northbridge/intel/Kconfig @@ -14,3 +14,4 @@ source src/northbridge/intel/sch/Kconfig source src/northbridge/intel/i5000/Kconfig source src/northbridge/intel/sandybridge/Kconfig source src/northbridge/intel/haswell/Kconfig +source src/northbridge/intel/fsp_sandybridge/Kconfig diff --git a/src/northbridge/intel/Makefile.inc b/src/northbridge/intel/Makefile.inc index 62e427d..f460850 100644 --- a/src/northbridge/intel/Makefile.inc +++ b/src/northbridge/intel/Makefile.inc @@ -15,3 +15,5 @@ subdirs-$(CONFIG_NORTHBRIDGE_INTEL_I5000) += i5000 subdirs-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += sandybridge subdirs-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += sandybridge subdirs-$(CONFIG_NORTHBRIDGE_INTEL_HASWELL) += haswell +subdirs-$(CONFIG_NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE) += fsp_sandybridge +subdirs-$(CONFIG_NORTHBRIDGE_INTEL_FSP_IVYBRIDGE) += fsp_sandybridge diff --git a/src/northbridge/intel/fsp_sandybridge/Kconfig b/src/northbridge/intel/fsp_sandybridge/Kconfig new file mode 100644 index 0000000..0c3d5f5 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/Kconfig @@ -0,0 +1,122 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Google Inc. +## Copyright (C) 2013 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE + bool + select CPU_INTEL_FSP_MODEL_206AX + +config NORTHBRIDGE_INTEL_FSP_IVYBRIDGE + bool + select CPU_INTEL_FSP_MODEL_306AX + +if NORTHBRIDGE_INTEL_FSP_IVYBRIDGE || NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE + +config HAVE_FSP_BIN + bool "Use Intel Firmware Support Package" + help + Select this option to add an Intel FSP binary to + the resulting coreboot image. + + Note: Without this binary, coreboot builds relying on the FSP + will not boot + +config VGA_BIOS_ID + string + default "8086,0106" + help + This is the default PCI ID for the sandybridge/ivybridge graphics + devices. This string names the vbios rom in cbfs. The following + PCI IDs will be remapped to load this rom: + 0x80860102, 0x8086010a, 0x80860112, 0x80860116 + 0x80860122, 0x80860126, 0x80860166 + +config DCACHE_RAM_BASE + hex + default 0xff7f0000 + +config DCACHE_RAM_SIZE + hex + default 0x10000 + + +if HAVE_FSP_BIN + +config FSP_FILE + string "Intel FSP binary path and filename" + default "../intel/fsp/ivybridge_bd82x6x/FvFsp.bin" if CPU_INTEL_FSP_MODEL_306AX && SOUTHBRIDGE_INTEL_FSP_BD82X6X + default "../intel/fsp/ivybridge_i89xx/FvFsp.bin" if CPU_INTEL_FSP_MODEL_306AX && SOUTHBRIDGE_INTEL_FSP_I89XX + help + The path and filename of the Intel FSP binary for this platform. + +config FSP_LOC + hex "Intel FSP Binary location in cbfs" + default 0xfff80000 + help + The location in cbfs that the FSP is located. This must match the + value that is set in the FSP binary. If the FSP needs to be moved, + rebase the FSP with the Intel's BCT (tool). + +config CBFS_SIZE + hex "Size of CBFS filesystem in ROM" + default 0x100000 + help + On Sandybridge and Ivybridge systems the firmware image may + have to store a lot more than just coreboot, including: + - a firmware descriptor + - Intel Management Engine firmware + This option specifies the maximum size of the CBFS portion in the + firmware image. + +config ENABLE_FAST_BOOT + bool "Enable Fast Boot" + default y if CPU_INTEL_FSP_MODEL_306AX && SOUTHBRIDGE_INTEL_FSP_BD82X6X + depends on !CACHE_ROM + help + Enabling this feature will cause MRC data to be cached in NV storage + which will speed up boot time on future reboots and/or power cycles. + + WARNING: This feature combined with the CACHE_ROM may result in undefined + behavior. + +config MRC_CACHE_SIZE + hex "MRC Data Cache Size" + default 0x10000 + depends on ENABLE_FAST_BOOT + help + This is the amount of space in NV storage that is reserved for MRC data + cache storage when using fast boot. + +config VIRTUAL_ROM_SIZE + hex "Virtual ROM Size" + default ROM_SIZE + depends on ENABLE_FAST_BOOT + help + This is used to calculate the offset of the MRC data cache in NV + Storage for "Fast Boot". If in doubt, leave this set to the default + which sets the virtual size equal to the ROM size. + + Example: Cougar Canyon 2 has 2 8 MB SPI ROMs. When the SPI ROMs are + loaded with a 4 MB coreboot image, the virtual ROM size is 8 MB. When + the SPI ROMs are loaded with an 8 MB coreboot image, the virtual ROM + size is 16 MB. + +endif # HAVE_FSP_BIN + +endif # NORTHBRIDGE_INTEL_FSP_IVYBRIDGE || NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE diff --git a/src/northbridge/intel/fsp_sandybridge/Makefile.inc b/src/northbridge/intel/fsp_sandybridge/Makefile.inc new file mode 100644 index 0000000..5bc3d58 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/Makefile.inc @@ -0,0 +1,58 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2010 Google Inc. +# Copyright (C) 2013 Sage Electronic Engineering, LLC. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +ramstage-y += northbridge.c +ramstage-y += gma.c + +ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += acpi.c +ramstage-y += fsp_util.c +ramstage-$(CONFIG_ENABLE_FAST_BOOT) += mrccache.c + +romstage-y += raminit.c +romstage-y += fsp_util.c +romstage-y += early_init.c +romstage-y += report_platform.c +romstage-y += ../../../arch/x86/lib/walkcbfs.S +romstage-$(CONFIG_ENABLE_FAST_BOOT) += mrccache.c + +smm-$(CONFIG_HAVE_SMI_HANDLER) += udelay.c +smm-$(CONFIG_HAVE_SMI_HANDLER) += finalize.c + +ifeq ($(CONFIG_HAVE_FSP_BIN),y) +# We don't ship an FSP, but booting without it is bound to fail +cbfs-files-y += fsp.bin +fsp.bin-file := $(call strip_quotes,$(CONFIG_FSP_FILE)) +fsp.bin-position := $(CONFIG_FSP_LOC) +fsp.bin-type := 0xab +endif + +ifeq ($(CONFIG_ENABLE_FAST_BOOT),y) +$(obj)/mrc.cache: + dd if=/dev/zero count=1 \ + bs=$(shell printf "%d" $(CONFIG_MRC_CACHE_SIZE) ) | \ + tr '\000' '\377' > $@ + +cbfs-files-y += mrc.cache +mrc.cache-file := $(obj)/mrc.cache +mrc.cache-position := 0xfff50000 +mrc.cache-type := 0xac +endif + +$(obj)/northbridge/intel/fsp_sandybridge/acpi.ramstage.o : $(obj)/build.h diff --git a/src/northbridge/intel/fsp_sandybridge/acpi.c b/src/northbridge/intel/fsp_sandybridge/acpi.c new file mode 100644 index 0000000..3c15615 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/acpi.c @@ -0,0 +1,202 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/acpi.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <build.h> +#include "northbridge.h" + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + device_t dev; + u32 pciexbar = 0; + u32 pciexbar_reg; + int max_buses; + + dev = dev_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_SB, 0); + if (!dev) + dev = dev_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_IB, 0); + if (!dev) + return current; + + pciexbar_reg=pci_read_config32(dev, PCIEXBAR); + + // MMCFG not supported or not enabled. + if (!(pciexbar_reg & (1 << 0))) + return current; + + switch ((pciexbar_reg >> 1) & 3) { + case 0: // 256MB + pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)); + max_buses = 256; + break; + case 1: // 128M + pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); + max_buses = 128; + break; + case 2: // 64M + pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)); + max_buses = 64; + break; + default: // RSVD + return current; + } + + if (!pciexbar) + return current; + + current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current, + pciexbar, 0x0, 0x0, max_buses - 1); + + return current; +} + +static void *get_intel_vbios(void) +{ + /* This should probably be looking at CBFS or we should always + * deploy the VBIOS on Intel systems, even if we don't run it + * in coreboot (e.g. SeaBIOS only scenarios). + */ + u8 *vbios = (u8 *)0xc0000; + + optionrom_header_t *oprom = (optionrom_header_t *)vbios; + optionrom_pcir_t *pcir = (optionrom_pcir_t *)(vbios + + oprom->pcir_offset); + + + printk(BIOS_DEBUG, "GET_VBIOS: %x %x %x %x %x\n", + oprom->signature, pcir->vendor, pcir->classcode[0], + pcir->classcode[1], pcir->classcode[2]); + + + if ((oprom->signature == OPROM_SIGNATURE) && + (pcir->vendor == PCI_VENDOR_ID_INTEL) && + (pcir->classcode[0] == 0x00) && + (pcir->classcode[1] == 0x00) && + (pcir->classcode[2] == 0x03)) + return (void *)vbios; + + return NULL; +} + +static int init_opregion_vbt(igd_opregion_t *opregion) +{ + void *vbios; + vbios = get_intel_vbios(); + if (!vbios) { + printk(BIOS_DEBUG, "VBIOS not found.\n"); + return 1; + } + + printk(BIOS_DEBUG, " ... VBIOS found at %p\n", vbios); + optionrom_header_t *oprom = (optionrom_header_t *)vbios; + optionrom_vbt_t *vbt = (optionrom_vbt_t *)(vbios + + oprom->vbt_offset); + + if (read32((unsigned long)vbt->hdr_signature) != VBT_SIGNATURE) { + printk(BIOS_DEBUG, "VBT not found!\n"); + return 1; + } + + memcpy(opregion->header.vbios_version, vbt->coreblock_biosbuild, 4); + memcpy(opregion->vbt.gvd1, vbt, vbt->hdr_vbt_size < 7168 ? + vbt->hdr_vbt_size : 7168); + + return 0; +} + + +/* Initialize IGD OpRegion, called from ACPI code */ +int init_igd_opregion(igd_opregion_t *opregion) +{ + device_t igd; + u16 reg16; + + memset((void *)opregion, 0, sizeof(igd_opregion_t)); + + // FIXME if IGD is disabled, we should exit here. + + memcpy(&opregion->header.signature, IGD_OPREGION_SIGNATURE, + sizeof(IGD_OPREGION_SIGNATURE)); + + /* 8kb */ + opregion->header.size = sizeof(igd_opregion_t) / 1024; + opregion->header.version = IGD_OPREGION_VERSION; + + // FIXME We just assume we're mobile for now + opregion->header.mailboxes = MAILBOXES_MOBILE; + + // TODO Initialize Mailbox 1 + + // TODO Initialize Mailbox 3 + opregion->mailbox3.bclp = IGD_BACKLIGHT_BRIGHTNESS; + opregion->mailbox3.pfit = IGD_FIELD_VALID | IGD_PFIT_STRETCH; + opregion->mailbox3.pcft = 0; // should be (IMON << 1) & 0x3e + opregion->mailbox3.cblv = IGD_FIELD_VALID | IGD_INITIAL_BRIGHTNESS; + opregion->mailbox3.bclm[0] = IGD_WORD_FIELD_VALID + 0x0000; + opregion->mailbox3.bclm[1] = IGD_WORD_FIELD_VALID + 0x0a19; + opregion->mailbox3.bclm[2] = IGD_WORD_FIELD_VALID + 0x1433; + opregion->mailbox3.bclm[3] = IGD_WORD_FIELD_VALID + 0x1e4c; + opregion->mailbox3.bclm[4] = IGD_WORD_FIELD_VALID + 0x2866; + opregion->mailbox3.bclm[5] = IGD_WORD_FIELD_VALID + 0x327f; + opregion->mailbox3.bclm[6] = IGD_WORD_FIELD_VALID + 0x3c99; + opregion->mailbox3.bclm[7] = IGD_WORD_FIELD_VALID + 0x46b2; + opregion->mailbox3.bclm[8] = IGD_WORD_FIELD_VALID + 0x50cc; + opregion->mailbox3.bclm[9] = IGD_WORD_FIELD_VALID + 0x5ae5; + opregion->mailbox3.bclm[10] = IGD_WORD_FIELD_VALID + 0x64ff; + + init_opregion_vbt(opregion); + + /* TODO This needs to happen in S3 resume, too. + * Maybe it should move to the finalize handler + */ + igd = dev_find_slot(0, PCI_DEVFN(0x2, 0)); + + pci_write_config32(igd, ASLS, (u32)opregion); + reg16 = pci_read_config16(igd, SWSCI); + reg16 &= ~(1 << 0); + reg16 |= (1 << 15); + pci_write_config16(igd, SWSCI, reg16); + + /* clear dmisci status */ + reg16 = inw(DEFAULT_PMBASE + TCO1_STS); + reg16 |= DMISCI_STS; // reference code does an &= + outw(DEFAULT_PMBASE + TCO1_STS, reg16); + + /* clear acpi tco status */ + outl(DEFAULT_PMBASE + GPE0_STS, TCOSCI_STS); + + /* enable acpi tco scis */ + reg16 = inw(DEFAULT_PMBASE + GPE0_EN); + reg16 |= TCOSCI_EN; + outw(DEFAULT_PMBASE + GPE0_EN, reg16); + + return 0; +} + + diff --git a/src/northbridge/intel/fsp_sandybridge/acpi/hostbridge.asl b/src/northbridge/intel/fsp_sandybridge/acpi/hostbridge.asl new file mode 100644 index 0000000..1a15d81 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/acpi/hostbridge.asl @@ -0,0 +1,361 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + + +Name(_HID,EISAID("PNP0A08")) // PCIe +Name(_CID,EISAID("PNP0A03")) // PCI + +Name(_ADR, 0) +Name(_BBN, 0) + +Device (MCHC) +{ + Name(_ADR, 0x00000000) // 0:0.0 + + OperationRegion(MCHP, PCI_Config, 0x00, 0x100) + Field (MCHP, DWordAcc, NoLock, Preserve) + { + Offset (0x40), // EPBAR + EPEN, 1, // Enable + , 11, // + EPBR, 24, // EPBAR + + Offset (0x48), // MCHBAR + MHEN, 1, // Enable + , 13, // + MHBR, 22, // MCHBAR + + Offset (0x60), // PCIe BAR + PXEN, 1, // Enable + PXSZ, 2, // BAR size + , 23, // + PXBR, 10, // PCIe BAR + + Offset (0x68), // DMIBAR + DMEN, 1, // Enable + , 11, // + DMBR, 24, // DMIBAR + + Offset (0x70), // ME Base Address + MEBA, 64, + + // ... + + Offset (0x80), // PAM0 + , 4, + PM0H, 2, + , 2, + Offset (0x81), // PAM1 + PM1L, 2, + , 2, + PM1H, 2, + , 2, + Offset (0x82), // PAM2 + PM2L, 2, + , 2, + PM2H, 2, + , 2, + Offset (0x83), // PAM3 + PM3L, 2, + , 2, + PM3H, 2, + , 2, + Offset (0x84), // PAM4 + PM4L, 2, + , 2, + PM4H, 2, + , 2, + Offset (0x85), // PAM5 + PM5L, 2, + , 2, + PM5H, 2, + , 2, + Offset (0x86), // PAM6 + PM6L, 2, + , 2, + PM6H, 2, + , 2, + + Offset (0xa0), // Top of Used Memory + TOM, 64, + + Offset (0xbc), // Top of Low Used Memory + TLUD, 32, + } + + Mutex (CTCM, 1) /* CTDP Switch Mutex (sync level 1) */ + Name (CTCC, 0) /* CTDP Current Selection */ + Name (CTCN, 0) /* CTDP Nominal Select */ + Name (CTCD, 1) /* CTDP Down Select */ + Name (CTCU, 2) /* CTDP Up Select */ + + OperationRegion (MCHB, SystemMemory, DEFAULT_MCHBAR, 0x8000) + Field (MCHB, DWordAcc, Lock, Preserve) + { + Offset (0x5930), + CTDN, 15, /* CTDP Nominal PL1 */ + Offset (0x59a0), + PL1V, 15, /* Power Limit 1 Value */ + PL1E, 1, /* Power Limit 1 Enable */ + PL1C, 1, /* Power Limit 1 Clamp */ + PL1T, 7, /* Power Limit 1 Time */ + Offset (0x59a4), + PL2V, 15, /* Power Limit 2 Value */ + PL2E, 1, /* Power Limit 2 Enable */ + PL2C, 1, /* Power Limit 2 Clamp */ + PL2T, 7, /* Power Limit 2 Time */ + Offset (0x5f3c), + TARN, 8, /* CTDP Nominal Turbo Activation Ratio */ + Offset (0x5f40), + CTDD, 15, /* CTDP Down PL1 */ + , 1, + TARD, 8, /* CTDP Down Turbo Activation Ratio */ + Offset (0x5f48), + CTDU, 15, /* CTDP Up PL1 */ + , 1, + TARU, 8, /* CTDP Up Turbo Activation Ratio */ + Offset (0x5f50), + CTCS, 2, /* CTDP Select */ + Offset (0x5f54), + TARS, 8, /* Turbo Activation Ratio Select */ + } + + /* + * Search CPU0 _PSS looking for control=arg0 and then + * return previous P-state entry number for new _PPC + * + * Format of _PSS: + * Name (_PSS, Package () { + * Package (6) { freq, power, tlat, blat, control, status } + * } + */ + External (\_PR.CPU0._PSS) + Method (PSSS, 1, NotSerialized) + { + Store (One, Local0) /* Start at P1 */ + Store (SizeOf (\_PR.CPU0._PSS), Local1) + + While (LLess (Local0, Local1)) { + /* Store _PSS entry Control value to Local2 */ + ShiftRight (DeRefOf (Index (DeRefOf (Index + (\_PR.CPU0._PSS, Local0)), 4)), 8, Local2) + If (LEqual (Local2, Arg0)) { + Return (Subtract (Local0, 1)) + } + Increment (Local0) + } + + Return (0) + } + + /* Set TDP Down */ + Method (STND, 0, Serialized) + { + If (Acquire (CTCM, 100)) { + Return (0) + } + If (LEqual (CTCD, CTCC)) { + Release (CTCM) + Return (0) + } + + Store ("Set TDP Down", Debug) + + /* Set CTC */ + Store (CTCD, CTCS) + + /* Set TAR */ + Store (TARD, TARS) + + /* Set PPC limit and notify OS */ + Store (PSSS (TARD), PPCM) + PPCN () + + /* Set PL2 to 1.25 * PL1 */ + Divide (Multiply (CTDD, 125), 100, Local0, PL2V) + + /* Set PL1 */ + Store (CTDD, PL1V) + + /* Store the new TDP Down setting */ + Store (CTCD, CTCC) + + Release (CTCM) + Return (1) + } + + /* Set TDP Nominal from Down */ + Method (STDN, 0, Serialized) + { + If (Acquire (CTCM, 100)) { + Return (0) + } + If (LEqual (CTCN, CTCC)) { + Release (CTCM) + Return (0) + } + + Store ("Set TDP Nominal", Debug) + + /* Set PL1 */ + Store (CTDN, PL1V) + + /* Set PL2 to 1.25 * PL1 */ + Divide (Multiply (CTDN, 125), 100, Local0, PL2V) + + /* Set PPC limit and notify OS */ + Store (PSSS (TARN), PPCM) + PPCN () + + /* Set TAR */ + Store (TARN, TARS) + + /* Set CTC */ + Store (CTCN, CTCS) + + /* Store the new TDP Nominal setting */ + Store (CTCN, CTCC) + + Release (CTCM) + Return (1) + } +} + +// Current Resource Settings + +Method (_CRS, 0, Serialized) +{ + Name (MCRS, ResourceTemplate() + { + // Bus Numbers + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, 0x0000, 0x00ff, 0x0000, 0x0100,,, PB00) + + // IO Region 0 + DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, 0x0000, 0x0cf7, 0x0000, 0x0cf8,,, PI00) + + // PCI Config Space + Io (Decode16, 0x0cf8, 0x0cf8, 0x0001, 0x0008) + + // IO Region 1 + DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, 0x0d00, 0xffff, 0x0000, 0xf300,,, PI01) + + // VGA memory (0xa0000-0xbffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000a0000, 0x000bffff, 0x00000000, + 0x00020000,,, ASEG) + + // OPROM reserved (0xd0000-0xd3fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000d0000, 0x000d3fff, 0x00000000, + 0x00004000,,, OPR0) + + // OPROM reserved (0xd4000-0xd7fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000d4000, 0x000d7fff, 0x00000000, + 0x00004000,,, OPR1) + + // OPROM reserved (0xd8000-0xdbfff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000d8000, 0x000dbfff, 0x00000000, + 0x00004000,,, OPR2) + + // OPROM reserved (0xdc000-0xdffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000dc000, 0x000dffff, 0x00000000, + 0x00004000,,, OPR3) + + // BIOS Extension (0xe0000-0xe3fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000e0000, 0x000e3fff, 0x00000000, + 0x00004000,,, ESG0) + + // BIOS Extension (0xe4000-0xe7fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000e4000, 0x000e7fff, 0x00000000, + 0x00004000,,, ESG1) + + // BIOS Extension (0xe8000-0xebfff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000e8000, 0x000ebfff, 0x00000000, + 0x00004000,,, ESG2) + + // BIOS Extension (0xec000-0xeffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000ec000, 0x000effff, 0x00000000, + 0x00004000,,, ESG3) + + // System BIOS (0xf0000-0xfffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x000f0000, 0x000fffff, 0x00000000, + 0x00010000,,, FSEG) + + // PCI Memory Region (Top of memory-0xfebfffff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0x00000000, 0xfebfffff, 0x00000000, + 0xfec00000,,, PM01) + + // TPM Area (0xfed40000-0xfed44fff) + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, + Cacheable, ReadWrite, + 0x00000000, 0xfed40000, 0xfed44fff, 0x00000000, + 0x00005000,,, TPMR) + }) + + // Find PCI resource area in MCRS + CreateDwordField(MCRS, PM01._MIN, PMIN) + CreateDwordField(MCRS, PM01._MAX, PMAX) + CreateDwordField(MCRS, PM01._LEN, PLEN) + + // Fix up PCI memory region + // Start with Top of Lower Usable DRAM + Store (^MCHC.TLUD, Local0) + Store (^MCHC.MEBA, Local1) + + // Check if ME base is equal + If (LEqual (Local0, Local1)) { + // Use Top Of Memory instead + Store (^MCHC.TOM, Local0) + } + + Store (Local0, PMIN) + Add(Subtract(PMAX, PMIN), 1, PLEN) + + Return (MCRS) +} + +/* IRQ assignment is mainboard specific. Get it from mainboard ACPI code */ +#include "acpi/hostbridge_pci_irqs.asl" + + diff --git a/src/northbridge/intel/fsp_sandybridge/acpi/igd.asl b/src/northbridge/intel/fsp_sandybridge/acpi/igd.asl new file mode 100644 index 0000000..a6804ad --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/acpi/igd.asl @@ -0,0 +1,324 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (GFX0) +{ + Name (_ADR, 0x00020000) + + /* Display Output Switching */ + Method (_DOS, 1) + { + /* Windows 2000 and Windows XP call _DOS to enable/disable + * Display Output Switching during init and while a switch + * is already active + */ + Store (And(Arg0, 7), DSEN) + } + + /* We try to support as many i945 systems as possible, + * so keep the number of DIDs flexible. + */ + Method (_DOD, 0) + { + If (LEqual(NDID, 1)) { + Name(DOD1, Package() { + 0xffffffff + }) + Store (Or(0x00010000, DID1), Index(DOD1, 0)) + Return(DOD1) + } + + If (LEqual(NDID, 2)) { + Name(DOD2, Package() { + 0xffffffff, + 0xffffffff + }) + Store (Or(0x00010000, DID2), Index(DOD2, 0)) + Store (Or(0x00010000, DID2), Index(DOD2, 1)) + Return(DOD2) + } + + If (LEqual(NDID, 3)) { + Name(DOD3, Package() { + 0xffffffff, + 0xffffffff, + 0xffffffff + }) + Store (Or(0x00010000, DID3), Index(DOD3, 0)) + Store (Or(0x00010000, DID3), Index(DOD3, 1)) + Store (Or(0x00010000, DID3), Index(DOD3, 2)) + Return(DOD3) + } + + If (LEqual(NDID, 4)) { + Name(DOD4, Package() { + 0xffffffff, + 0xffffffff, + 0xffffffff, + 0xffffffff + }) + Store (Or(0x00010000, DID4), Index(DOD4, 0)) + Store (Or(0x00010000, DID4), Index(DOD4, 1)) + Store (Or(0x00010000, DID4), Index(DOD4, 2)) + Store (Or(0x00010000, DID4), Index(DOD4, 3)) + Return(DOD4) + } + + If (LGreater(NDID, 4)) { + Name(DOD5, Package() { + 0xffffffff, + 0xffffffff, + 0xffffffff, + 0xffffffff, + 0xffffffff + }) + Store (Or(0x00010000, DID5), Index(DOD5, 0)) + Store (Or(0x00010000, DID5), Index(DOD5, 1)) + Store (Or(0x00010000, DID5), Index(DOD5, 2)) + Store (Or(0x00010000, DID5), Index(DOD5, 3)) + Store (Or(0x00010000, DID5), Index(DOD5, 4)) + Return(DOD5) + } + + /* Some error happened, but we have to return something */ + Return (Package() {0x00000400}) + } + + Device(DD01) + { + /* Device Unique ID */ + Method(_ADR, 0, Serialized) + { + If(LEqual(DID1, 0)) { + Return (1) + } Else { + Return (And(0xffff, DID1)) + } + } + + /* Device Current Status */ + Method(_DCS, 0) + { + TRAP(1) + If (And(CSTE, 1)) { + Return (0x1f) + } + Return(0x1d) + } + + /* Query Device Graphics State */ + Method(_DGS, 0) + { + If (And(NSTE, 1)) { + Return(1) + } + Return(0) + } + + /* Device Set State */ + Method(_DSS, 1) + { + /* If Parameter Arg0 is (1 << 31) | (1 << 30), the + * display switch was completed + */ + If (LEqual(And(Arg0, 0xc0000000), 0xc0000000)) { + Store (NSTE, CSTE) + } + } + } + + Device(DD02) + { + /* Device Unique ID */ + Method(_ADR, 0, Serialized) + { + If(LEqual(DID2, 0)) { + Return (2) + } Else { + Return (And(0xffff, DID2)) + } + } + + /* Device Current Status */ + Method(_DCS, 0) + { + TRAP(1) + If (And(CSTE, 2)) { + Return (0x1f) + } + Return(0x1d) + } + + /* Query Device Graphics State */ + Method(_DGS, 0) + { + If (And(NSTE, 2)) { + Return(1) + } + Return(0) + } + + /* Device Set State */ + Method(_DSS, 1) + { + /* If Parameter Arg0 is (1 << 31) | (1 << 30), the + * display switch was completed + */ + If (LEqual(And(Arg0, 0xc0000000), 0xc0000000)) { + Store (NSTE, CSTE) + } + } + } + + + Device(DD03) + { + /* Device Unique ID */ + Method(_ADR, 0, Serialized) + { + If(LEqual(DID3, 0)) { + Return (3) + } Else { + Return (And(0xffff, DID3)) + } + } + + /* Device Current Status */ + Method(_DCS, 0) + { + TRAP(1) + If (And(CSTE, 4)) { + Return (0x1f) + } + Return(0x1d) + } + + /* Query Device Graphics State */ + Method(_DGS, 0) + { + If (And(NSTE, 4)) { + Return(1) + } + Return(0) + } + + /* Device Set State */ + Method(_DSS, 1) + { + /* If Parameter Arg0 is (1 << 31) | (1 << 30), the + * display switch was completed + */ + If (LEqual(And(Arg0, 0xc0000000), 0xc0000000)) { + Store (NSTE, CSTE) + } + } + } + + + Device(DD04) + { + /* Device Unique ID */ + Method(_ADR, 0, Serialized) + { + If(LEqual(DID4, 0)) { + Return (4) + } Else { + Return (And(0xffff, DID4)) + } + } + + /* Device Current Status */ + Method(_DCS, 0) + { + TRAP(1) + If (And(CSTE, 8)) { + Return (0x1f) + } + Return(0x1d) + } + + /* Query Device Graphics State */ + Method(_DGS, 0) + { + If (And(NSTE, 4)) { + Return(1) + } + Return(0) + } + + /* Device Set State */ + Method(_DSS, 1) + { + /* If Parameter Arg0 is (1 << 31) | (1 << 30), the + * display switch was completed + */ + If (LEqual(And(Arg0, 0xc0000000), 0xc0000000)) { + Store (NSTE, CSTE) + } + } + } + + + Device(DD05) + { + /* Device Unique ID */ + Method(_ADR, 0, Serialized) + { + If(LEqual(DID5, 0)) { + Return (5) + } Else { + Return (And(0xffff, DID5)) + } + } + + /* Device Current Status */ + Method(_DCS, 0) + { + TRAP(1) + If (And(CSTE, 16)) { + Return (0x1f) + } + Return(0x1d) + } + + /* Query Device Graphics State */ + Method(_DGS, 0) + { + If (And(NSTE, 4)) { + Return(1) + } + Return(0) + } + + /* Device Set State */ + Method(_DSS, 1) + { + /* If Parameter Arg0 is (1 << 31) | (1 << 30), the + * display switch was completed + */ + If (LEqual(And(Arg0, 0xc0000000), 0xc0000000)) { + Store (NSTE, CSTE) + } + } + } + +} + diff --git a/src/northbridge/intel/fsp_sandybridge/acpi/sandybridge.asl b/src/northbridge/intel/fsp_sandybridge/acpi/sandybridge.asl new file mode 100644 index 0000000..7d51135 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/acpi/sandybridge.asl @@ -0,0 +1,59 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "../northbridge.h" +#include "hostbridge.asl" + +/* PCI Device Resource Consumption */ +Device (PDRC) +{ + Name (_HID, EISAID("PNP0C02")) + Name (_UID, 1) + + Name (PDRS, ResourceTemplate() { + Memory32Fixed(ReadWrite, 0xfed1c000, 0x00004000) // RCBA + Memory32Fixed(ReadWrite, DEFAULT_MCHBAR, 0x00004000) + Memory32Fixed(ReadWrite, DEFAULT_DMIBAR, 0x00001000) + Memory32Fixed(ReadWrite, DEFAULT_EPBAR, 0x00001000) + Memory32Fixed(ReadWrite, DEFAULT_PCIEXBAR, 0x04000000) + Memory32Fixed(ReadWrite, 0xfed20000, 0x00020000) // Misc ICH + Memory32Fixed(ReadWrite, 0xfed40000, 0x00005000) // Misc ICH + Memory32Fixed(ReadWrite, 0xfed45000, 0x0004b000) // Misc ICH + +#if CONFIG_CHROMEOS_RAMOOPS + Memory32Fixed(ReadWrite, CONFIG_CHROMEOS_RAMOOPS_RAM_START, + CONFIG_CHROMEOS_RAMOOPS_RAM_SIZE) +#endif + + /* Required for SandyBridge sighting 3715511 */ + Memory32Fixed(ReadWrite, 0x20000000, 0x00200000) + Memory32Fixed(ReadWrite, 0x40000000, 0x00200000) + }) + + // Current Resource Settings + Method (_CRS, 0, Serialized) + { + Return(PDRS) + } +} + +// Integrated graphics 0:2.0 +#include "igd.asl" diff --git a/src/northbridge/intel/fsp_sandybridge/chip.h b/src/northbridge/intel/fsp_sandybridge/chip.h new file mode 100644 index 0000000..7e6c1d8 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/chip.h @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Digital Port Hotplug Enable: + * 0x04 = Enabled, 2ms short pulse + * 0x05 = Enabled, 4.5ms short pulse + * 0x06 = Enabled, 6ms short pulse + * 0x07 = Enabled, 100ms short pulse + */ +struct northbridge_intel_fsp_sandybridge_config { + u8 gpu_dp_b_hotplug; /* Digital Port B Hotplug Config */ + u8 gpu_dp_c_hotplug; /* Digital Port C Hotplug Config */ + u8 gpu_dp_d_hotplug; /* Digital Port D Hotplug Config */ + + u8 gpu_panel_port_select; /* 0=LVDS 1=DP_B 2=DP_C 3=DP_D */ + u8 gpu_panel_power_cycle_delay; /* T4 time sequence */ + u16 gpu_panel_power_up_delay; /* T1+T2 time sequence */ + u16 gpu_panel_power_down_delay; /* T3 time sequence */ + u16 gpu_panel_power_backlight_on_delay; /* T5 time sequence */ + u16 gpu_panel_power_backlight_off_delay; /* Tx time sequence */ + + u32 gpu_cpu_backlight; /* CPU Backlight PWM value */ + u32 gpu_pch_backlight; /* PCH Backlight PWM value */ +}; + diff --git a/src/northbridge/intel/fsp_sandybridge/early_init.c b/src/northbridge/intel/fsp_sandybridge/early_init.c new file mode 100644 index 0000000..4b615e9 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/early_init.c @@ -0,0 +1,88 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 Google Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <console/console.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <elog.h> +#include "northbridge.h" + +static void sandybridge_setup_bars(void) +{ + printk(BIOS_DEBUG, "Setting up static northbridge registers..."); + /* Set up all hardcoded northbridge BARs */ + pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR, DEFAULT_EPBAR | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR + 4, (0LL+DEFAULT_EPBAR) >> 32); + pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR, DEFAULT_MCHBAR | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR + 4, (0LL+DEFAULT_MCHBAR) >> 32); + pci_write_config32(PCI_DEV(0, 0x00, 0), PCIEXBAR, DEFAULT_PCIEXBAR | 5); /* 64MB - busses 0-63 */ + pci_write_config32(PCI_DEV(0, 0x00, 0), PCIEXBAR + 4, (0LL+DEFAULT_PCIEXBAR) >> 32); + pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR, DEFAULT_DMIBAR | 1); + pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR + 4, (0LL+DEFAULT_DMIBAR) >> 32); + + /* Set C0000-FFFFF to access RAM on both reads and writes */ + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM0, 0x30); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM1, 0x33); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM2, 0x33); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM3, 0x33); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM4, 0x33); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM5, 0x33); + pci_write_config8(PCI_DEV(0, 0x00, 0), PAM6, 0x33); + +#if CONFIG_ELOG_BOOT_COUNT + /* Increment Boot Counter for non-S3 resume */ + if ((inw(DEFAULT_PMBASE + PM1_STS) & WAK_STS) && + ((inl(DEFAULT_PMBASE + PM1_CNT) >> 10) & 7) != SLP_TYP_S3) + boot_count_increment(); +#endif + + printk(BIOS_DEBUG, " done.\n"); + +#if CONFIG_ELOG_BOOT_COUNT + /* Increment Boot Counter except when resuming from S3 */ + if ((inw(DEFAULT_PMBASE + PM1_STS) & WAK_STS) && + ((inl(DEFAULT_PMBASE + PM1_CNT) >> 10) & 7) == SLP_TYP_S3) + return; + boot_count_increment(); +#endif +} + +void sandybridge_early_initialization(int chipset_type) +{ + u32 capid0_a; + u8 reg8; + + /* Device ID Override Enable should be done very early */ + capid0_a = pci_read_config32(PCI_DEV(0, 0, 0), 0xe4); + if (capid0_a & (1 << 10)) { + reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0xf3); + reg8 &= ~7; /* Clear 2:0 */ + + if (chipset_type == SANDYBRIDGE_MOBILE) + reg8 |= 1; /* Set bit 0 */ + + pci_write_config8(PCI_DEV(0, 0, 0), 0xf3, reg8); + } + + /* Setup all BARs required for early PCIe and raminit */ + sandybridge_setup_bars(); +} diff --git a/src/northbridge/intel/fsp_sandybridge/finalize.c b/src/northbridge/intel/fsp_sandybridge/finalize.c new file mode 100644 index 0000000..f61f8b1 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/finalize.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <stdlib.h> +#include "northbridge.h" + +#define PCI_DEV_SNB PCI_DEV(0, 0, 0) + +void intel_sandybridge_finalize_smm(void) +{ + pcie_or_config16(PCI_DEV_SNB, 0x50, 1 << 0); /* GGC */ + pcie_or_config32(PCI_DEV_SNB, 0x5c, 1 << 0); /* DPR */ + pcie_or_config32(PCI_DEV_SNB, 0x78, 1 << 10); /* ME */ + pcie_or_config32(PCI_DEV_SNB, 0x90, 1 << 0); /* REMAPBASE */ + pcie_or_config32(PCI_DEV_SNB, 0x98, 1 << 0); /* REMAPLIMIT */ + pcie_or_config32(PCI_DEV_SNB, 0xa0, 1 << 0); /* TOM */ + pcie_or_config32(PCI_DEV_SNB, 0xa8, 1 << 0); /* TOUUD */ + pcie_or_config32(PCI_DEV_SNB, 0xb0, 1 << 0); /* BDSM */ + pcie_or_config32(PCI_DEV_SNB, 0xb4, 1 << 0); /* BGSM */ + pcie_or_config32(PCI_DEV_SNB, 0xb8, 1 << 0); /* TSEGMB */ + pcie_or_config32(PCI_DEV_SNB, 0xbc, 1 << 0); /* TOLUD */ + + MCHBAR32_OR(0x5500, 1 << 0); /* PAVP */ + MCHBAR32_OR(0x5f00, 1 << 31); /* SA PM */ + MCHBAR32_OR(0x6020, 1 << 0); /* UMA GFX */ + MCHBAR32_OR(0x63fc, 1 << 0); /* VTDTRK */ + MCHBAR32_OR(0x6800, 1 << 31); + MCHBAR32_OR(0x7000, 1 << 31); + MCHBAR32_OR(0x77fc, 1 << 0); + + /* Memory Controller Lockdown */ + MCHBAR8(0x50fc) = 0x8f; + + /* Read+write the following */ + MCHBAR32(0x6030) = MCHBAR32(0x6030); + MCHBAR32(0x6034) = MCHBAR32(0x6034); + MCHBAR32(0x6008) = MCHBAR32(0x6008); +} diff --git a/src/northbridge/intel/fsp_sandybridge/fsp_util.c b/src/northbridge/intel/fsp_sandybridge/fsp_util.c new file mode 100644 index 0000000..a8738a4 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/fsp_util.c @@ -0,0 +1,413 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cpu/x86/stack.h> +#include <console/console.h> +#include "fsp_util.h" + +#if CONFIG_ENABLE_FAST_BOOT +#include <device/device.h> +#include "northbridge.h" +#include <cbmem.h> +#include <ip_checksum.h> +#endif + +void find_fsp (void); + +#ifndef __PRE_RAM__ +/* Globals pointers for FSP structures */ +void *FspHobListPtr; +FSP_INFO_HEADER *fsp_header_ptr; + +void FspNotify (u32 Phase) +{ + FSP_NOTFY_PHASE NotifyPhaseProc; + NOTIFY_PHASE_PARAMS NotifyPhaseParams; + EFI_STATUS Status; + + if (fsp_header_ptr == NULL) { + find_fsp(); + if (fsp_header_ptr == NULL) { + post_code(0x4F); /* output something in case there is no serial */ + die("Can't find the FSP!\n"); + } + } + + /* call FSP PEI to Notify PostPciEnumeration */ + NotifyPhaseProc = (FSP_NOTFY_PHASE)(fsp_header_ptr->ImageBase + fsp_header_ptr->NotifyPhaseEntry); + NotifyPhaseParams.Phase = Phase; + Status = NotifyPhaseProc (&NotifyPhaseParams); + if (Status != 0) + printk(BIOS_ERR,"FSP API NotifyPhase failed for phase 0x%x with status: 0x%x\n", Phase, Status); +} +#endif + +#ifdef __PRE_RAM__ +/* + * + * Call the FSP to do memory init. The FSP doesn't return to this function. + * The FSP returns to the romstage_main_continue(). + * + */ +const PLATFORM_CONFIG DefaultPlatformConfig = { + TRUE, // Hyperthreading + FALSE, // Turbo Mode + FALSE, // Memory Down +#if CONFIG_ENABLE_FAST_BOOT + TRUE, // Fast Boot +#else + FALSE, // Fast Boot +#endif +}; + +void __attribute__ ((noreturn)) fsp_early_init (FSP_INFO_HEADER *fsp_ptr) +{ + FSP_FSP_INIT FspInitApi; + FSP_INIT_PARAMS FspInitParams; + FSP_INIT_RT_BUFFER FspRtBuffer; + MEM_CONFIG MemoryConfig; + memset((void*)&MemoryConfig, 0, sizeof(MEM_CONFIG)); + + memset((void*)&FspRtBuffer, 0, sizeof(FSP_INIT_RT_BUFFER)); + FspRtBuffer.Common.StackTop = (u32 *)ROMSTAGE_STACK; + FspRtBuffer.Platform.MemoryConfig = &MemoryConfig; + FspRtBuffer.PlatformConfiguration.PlatformConfig = &DefaultPlatformConfig; + FspInitParams.NvsBufferPtr = NULL; + +#if CONFIG_ENABLE_FAST_BOOT + /* find_current_mrc_cache */ + struct mrc_data_container *mrc_cache = NULL; + if (((mrc_cache = find_current_mrc_cache()) == NULL) || (mrc_cache->mrc_data_size == -1UL)) { + printk(BIOS_DEBUG, "FSP MRC cache not present.\n"); + FspInitParams.NvsBufferPtr = (void *) NULL; + } else { + printk(BIOS_DEBUG, "FSP MRC cache present at %x.\n", (u32)mrc_cache); + printk(BIOS_SPEW, "Saved MRC data:\n"); + hexdump32(BIOS_SPEW, (void *)mrc_cache->mrc_data, (mrc_cache->mrc_data_size / 4)); + FspInitParams.NvsBufferPtr = (void *) (EFI_HOB_GUID_TYPE *) mrc_cache->mrc_data; + } +#endif + + /* Not sure why passing BootMode is required - the only valid value is 0 */ + FspRtBuffer.Common.BootMode = 0; + FspInitParams.RtBufferPtr = (FSP_INIT_RT_BUFFER *)&FspRtBuffer; + FspInitParams.ContinuationFunc = (CONTINUATION_PROC)romstage_main_continue; + FspInitApi = (FSP_FSP_INIT)(fsp_ptr->ImageBase + fsp_ptr->FspInitEntry); + + /* call back to romstage.c here to allow structures to be changed */ + romstage_fsp_rt_buffer_callback(&FspRtBuffer); + + FspInitApi(&FspInitParams); + + /* Should never return. Control will continue from ContinuationFunc */ + die("Uh Oh! FspInitApi returned"); +} +#endif + +void __attribute__((optimize("O0"))) find_fsp () +{ + +#ifdef __PRE_RAM__ + volatile register u8 *fsp_ptr asm ("eax"); + + /* Entry point for CAR assembly routine */ + __asm__ __volatile__ ( + ".global find_fsp\n\t" + "find_fsp:\n\t" + ); +#else + u8 *fsp_ptr; +#endif + + /* The FSP is stored in CBFS */ + fsp_ptr = (u8 *) CONFIG_FSP_LOC; + + /* Check the FV signature, _FVH */ + if (((EFI_FIRMWARE_VOLUME_HEADER *)fsp_ptr)->Signature == 0x4856465F) { + /* Go to the end of the FV header and align the address. */ + fsp_ptr += ((EFI_FIRMWARE_VOLUME_HEADER *)fsp_ptr)->ExtHeaderOffset; + fsp_ptr += ((EFI_FIRMWARE_VOLUME_EXT_HEADER *)fsp_ptr)->ExtHeaderSize; + fsp_ptr = (u8 *)(((u32)fsp_ptr + 7) & 0xFFFFFFF8); + } else { + fsp_ptr = (u8*)ERROR_NO_FV_SIG; + } + + /* Check the FFS GUID */ + if (((u32)fsp_ptr > 0xff) && + (((u32 *)&(((EFI_FFS_FILE_HEADER *)fsp_ptr)->Name))[0] == 0x912740BE) && + (((u32 *)&(((EFI_FFS_FILE_HEADER *)fsp_ptr)->Name))[1] == 0x47342284) && + (((u32 *)&(((EFI_FFS_FILE_HEADER *)fsp_ptr)->Name))[2] == 0xB08471B9) && + (((u32 *)&(((EFI_FFS_FILE_HEADER *)fsp_ptr)->Name))[3] == 0x0C3F3527)) { + /* Add the FFS Header size to the base to find the Raw section Header */ + fsp_ptr += sizeof(EFI_FFS_FILE_HEADER); + } else { + fsp_ptr = (u8 *)ERROR_NO_FFS_GUID; + } + + if (((u32)fsp_ptr > 0xff) && + ((EFI_RAW_SECTION *)fsp_ptr)->Type == EFI_SECTION_RAW) { + /* Add the Raw Header size to the base to find the FSP INFO Header */ + fsp_ptr += sizeof(EFI_RAW_SECTION); + } else { + fsp_ptr = (u8 *)ERROR_NO_INFO_HEADER; + } + +#if 0 /* removed for debugging */ + /* Verify that the FSP is set to the base address we're expecting.*/ + if (((u32)fsp_ptr > 0xff) && + (*(u32*)(fsp_ptr + FSP_IMAGE_BASE_LOC) != CONFIG_FSP_LOC)) { + fsp_ptr = (u8 *)ERROR_IMAGEBASE_MISMATCH; + } + /* Verify the FSP Signature */ + if (((u32)fsp_ptr > 0xff) && + (*(u32*)(fsp_ptr + FSP_IMAGE_SIG_LOC) != FSP_SIG)){ + fsp_ptr = (u8 *)ERROR_INFO_HEAD_SIG_MISMATCH; + } + + /* Verify the FSP ID */ + if (((u32)fsp_ptr > 0xff) && + (*(u32 *)(fsp_ptr + FSP_IMAGE_ID_LOC) != CONFIG_FSP_IMAGE_ID_DWORD0)){ + fsp_ptr = (u8 *)ERROR_FSP_SIG_MISMATCH; + } + if (((u32)fsp_ptr > 0xff) && + (*(u32 *)(fsp_ptr + FSP_IMAGE_ID_LOC + 4) != CONFIG_FSP_IMAGE_ID_DWORD1)) { + fsp_ptr = (u8 *)ERROR_FSP_SIG_MISMATCH; + } +#endif /* removed for debugging */ + +#ifdef __PRE_RAM__ + __asm__ __volatile__ ("ret"); +#else + fsp_header_ptr = (FSP_INFO_HEADER *) fsp_ptr; + printk(BIOS_SPEW,"fsp_header_ptr: 0x%x\n", (u32)fsp_header_ptr); + return; +#endif +} + +void print_fsp_info(void) { + +#ifndef __PRE_RAM__ + if (fsp_header_ptr == NULL) + find_fsp(); + + printk(BIOS_INFO,"FSP Header Version: %d\n", fsp_header_ptr->HeaderRevision); + printk(BIOS_INFO,"FSP Revision: %d.%d\n", + (u8)((fsp_header_ptr->ImageRevision >> 8) & 0xff), + (u8)(fsp_header_ptr->ImageRevision & 0xff)); +#endif +} + +#ifndef __PRE_RAM__ /* Only parse HOB data in ramstage */ +static void print_hob_mem_attributes(void *Hobptr) { + EFI_HOB_MEMORY_ALLOCATION *HobMemoryPtr = (EFI_HOB_MEMORY_ALLOCATION *)Hobptr; + EFI_MEMORY_TYPE Hobmemtype = HobMemoryPtr->AllocDescriptor.MemoryType; + u64 Hobmemaddr = HobMemoryPtr->AllocDescriptor.MemoryBaseAddress; + u64 Hobmemlength = HobMemoryPtr->AllocDescriptor.MemoryLength; + const char * Hobmemtypenames[15]; + + Hobmemtypenames[0] = "EfiReservedMemoryType"; + Hobmemtypenames[1] = "EfiLoaderCode"; + Hobmemtypenames[2] = "EfiLoaderData"; + Hobmemtypenames[3] = "EfiBootServicesCode"; + Hobmemtypenames[4] = "EfiBootServicesData"; + Hobmemtypenames[5] = "EfiRuntimeServicesCode"; + Hobmemtypenames[6] = "EfiRuntimeServicesData"; + Hobmemtypenames[7] = "EfiConventionalMemory"; + Hobmemtypenames[8] = "EfiUnusableMemory"; + Hobmemtypenames[9] = "EfiACPIReclaimMemory"; + Hobmemtypenames[10] = "EfiACPIMemoryNVS"; + Hobmemtypenames[11] = "EfiMemoryMappedIO"; + Hobmemtypenames[12] = "EfiMemoryMappedIOPortSpace"; + Hobmemtypenames[13] = "EfiPalCode"; + Hobmemtypenames[14] = "EfiMaxMemoryType"; + + printk(BIOS_SPEW, " Memory type %s (0x%x)\n", + Hobmemtypenames[(u32)Hobmemtype], (u32) Hobmemtype); + printk(BIOS_SPEW, " at location 0x%0lx with length 0x%0lx\n", + (long unsigned int)Hobmemaddr, (long unsigned int)Hobmemlength); +} + +static void print_hob_resource_attributes(void *Hobptr) { + EFI_HOB_RESOURCE_DESCRIPTOR *HobResourcePtr = (EFI_HOB_RESOURCE_DESCRIPTOR *)Hobptr; + u32 Hobrestype = HobResourcePtr->ResourceType; + u32 Hobresattr = HobResourcePtr->ResourceAttribute; + u64 Hobresaddr = HobResourcePtr->PhysicalStart; + u64 Hobreslength = HobResourcePtr->ResourceLength; + const char *Hobrestypestr = NULL; + + // HOB Resource Types + switch (Hobrestype) { + case EFI_RESOURCE_SYSTEM_MEMORY: + Hobrestypestr = "EFI_RESOURCE_SYSTEM_MEMORY"; break; + case EFI_RESOURCE_MEMORY_MAPPED_IO: + Hobrestypestr = "EFI_RESOURCE_MEMORY_MAPPED_IO"; break; + case EFI_RESOURCE_IO: + Hobrestypestr = "EFI_RESOURCE_IO"; break; + case EFI_RESOURCE_FIRMWARE_DEVICE: + Hobrestypestr = "EFI_RESOURCE_FIRMWARE_DEVICE"; break; + case EFI_RESOURCE_MEMORY_MAPPED_IO_PORT: + Hobrestypestr = "EFI_RESOURCE_MEMORY_MAPPED_IO_PORT"; break; + case EFI_RESOURCE_MEMORY_RESERVED: + Hobrestypestr = "EFI_RESOURCE_MEMORY_RESERVED"; break; + case EFI_RESOURCE_IO_RESERVED: + Hobrestypestr = "EFI_RESOURCE_IO_RESERVED"; break; + case EFI_RESOURCE_MAX_MEMORY_TYPE: + Hobrestypestr = "EFI_RESOURCE_MAX_MEMORY_TYPE"; break; + default: + Hobrestypestr = "EFI_RESOURCE_UNKNOWN"; break; + } + + printk(BIOS_SPEW, " Resource %s (0x%0x) has attributes 0x%0x\n", + Hobrestypestr, Hobrestype, Hobresattr); + printk(BIOS_SPEW, " at location 0x%0lx with length 0x%0lx\n", + (long unsigned int)Hobresaddr, (long unsigned int)Hobreslength); +} + +static const char * get_hob_type_string(void *Hobptr) { + EFI_HOB_GENERIC_HEADER *HobHeaderPtr = (EFI_HOB_GENERIC_HEADER *)Hobptr; + u16 Hobtype = HobHeaderPtr->HobType; + const char *Hobtypestring = NULL; + + switch (Hobtype) { + case EFI_HOB_TYPE_HANDOFF: + Hobtypestring = "EFI_HOB_TYPE_HANDOFF"; break; + case EFI_HOB_TYPE_MEMORY_ALLOCATION: + Hobtypestring = "EFI_HOB_TYPE_MEMORY_ALLOCATION"; break; + case EFI_HOB_TYPE_RESOURCE_DESCRIPTOR: + Hobtypestring = "EFI_HOB_TYPE_RESOURCE_DESCRIPTOR"; break; + case EFI_HOB_TYPE_GUID_EXTENSION: + Hobtypestring = "EFI_HOB_TYPE_GUID_EXTENSION"; break; + case EFI_HOB_TYPE_MEMORY_POOL: + Hobtypestring = "EFI_HOB_TYPE_MEMORY_POOL"; break; + case EFI_HOB_TYPE_UNUSED: + Hobtypestring = "EFI_HOB_TYPE_UNUSED"; break; + case EFI_HOB_TYPE_END_OF_HOB_LIST: + Hobtypestring = "EFI_HOB_TYPE_END_OF_HOB_LIST"; break; + default: + Hobtypestring = "EFI_HOB_TYPE_UNRECOGNIZED"; break; + } + + return Hobtypestring; +} + +/* Print out a structure of all the HOBs + * that match a certain type: + * Print all types (0x0000) + * EFI_HOB_TYPE_HANDOFF (0x0001) + * EFI_HOB_TYPE_MEMORY_ALLOCATION (0x0002) + * EFI_HOB_TYPE_RESOURCE_DESCRIPTOR (0x0003) + * EFI_HOB_TYPE_GUID_EXTENSION (0x0004) + * EFI_HOB_TYPE_MEMORY_POOL (0x0007) + * EFI_HOB_TYPE_UNUSED (0xFFFE) + * EFI_HOB_TYPE_END_OF_HOB_LIST (0xFFFF) + */ +void print_hob_type_structure(u16 Hobtype, void *Hoblistptr) { + u32 *Currenthob; + u32 *Nexthob = 0; + u8 Lasthob = 0; + u32 Currenttype; + const char *Currenttypestr; + + Currenthob = Hoblistptr; + + /* Print out HOBs of our desired type until + * the end of the HOB list + */ + printk(BIOS_DEBUG, "\n=== FSP HOB Data Structure ===\n"); + printk(BIOS_DEBUG, "FSP Hoblistptr: 0x%0x\n", + (u32) Hoblistptr); + do { + EFI_HOB_GENERIC_HEADER *CurrentHeaderPtr = (EFI_HOB_GENERIC_HEADER *)Currenthob; + Currenttype = CurrentHeaderPtr->HobType; // Get the type of this HOB + Currenttypestr = get_hob_type_string(Currenthob); + + if (Currenttype == Hobtype || Hobtype == 0x0000) { + printk(BIOS_DEBUG, "HOB 0x%0x is an %s (type 0x%0x)\n", + (u32) Currenthob, Currenttypestr, Currenttype); + switch (Currenttype) { + case EFI_HOB_TYPE_MEMORY_ALLOCATION: + print_hob_mem_attributes(Currenthob); break; + case EFI_HOB_TYPE_RESOURCE_DESCRIPTOR: + print_hob_resource_attributes(Currenthob); break; + } + } + + Lasthob = END_OF_HOB_LIST(Currenthob); // Check for end of HOB list + if (!Lasthob) { + Nexthob = GET_NEXT_HOB(Currenthob); // Get next HOB pointer + Currenthob = Nexthob; // Start on next HOB + } + } while (!Lasthob); + printk(BIOS_DEBUG, "=== End of FSP HOB Data Structure ===\n\n"); +} + +#if CONFIG_ENABLE_FAST_BOOT +/** + * Save the FSP memory HOB (mrc data) to the MRC area in CBMEM + */ +void save_mrc_data(void *hob_start) +{ + u32 *mrc_hob; + u32 *mrc_hob_data; + u32 mrc_hob_size; + struct mrc_data_container *mrc_data; + int output_len; + const EFI_GUID mrc_guid = FSP_NON_VOLATILE_STORAGE_HOB_GUID; + + mrc_hob = GetNextGuidHob(&mrc_guid, hob_start); + if (mrc_hob == NULL) die ("mrc_hob is NULL"); + + mrc_hob_data = GET_GUID_HOB_DATA (mrc_hob); + mrc_hob_size = (u32) GET_HOB_LENGTH(mrc_hob); + + printk(BIOS_DEBUG, "Memory Configure Data Hob at %p (size = 0x%x).\n", + (void *)mrc_hob_data, mrc_hob_size); + + output_len = ALIGN(mrc_hob_size, 16); + + /* Save the MRC S3/Fastboot/ADR restore data to cbmem */ + mrc_data = cbmem_add (CBMEM_ID_MRCDATA, + output_len + sizeof(struct mrc_data_container)); + + /* Just return if there was a problem with getting CBMEM */ + if (mrc_data == NULL) return; + + printk(BIOS_DEBUG, "Copy FSP MRC DATA to HOB (source addr %p, dest addr %p, %u bytes)\n", + (void *)mrc_hob_data, mrc_data, output_len); + + mrc_data->mrc_signature = MRC_DATA_SIGNATURE; + mrc_data->mrc_data_size = output_len; + mrc_data->reserved = 0; + memcpy(mrc_data->mrc_data, (const void *)mrc_hob_data, mrc_hob_size); + + /* Zero the unused space in aligned buffer. */ + if (output_len > mrc_hob_size) + memset((mrc_data->mrc_data + mrc_hob_size), 0, + output_len - mrc_hob_size); + + mrc_data->mrc_checksum = compute_ip_checksum(mrc_data->mrc_data, + mrc_data->mrc_data_size); + + printk(BIOS_SPEW, "MRC data in CBMEM(includes align and checksum):\n"); + hexdump32(BIOS_SPEW, (void *)mrc_data->mrc_data, (output_len / 4)); +} +#endif +#endif /*__PRE_RAM__*/ diff --git a/src/northbridge/intel/fsp_sandybridge/fsp_util.h b/src/northbridge/intel/fsp_sandybridge/fsp_util.h new file mode 100644 index 0000000..d87cf58 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/fsp_util.h @@ -0,0 +1,88 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef FSP_UTIL_H +#define FSP_UTIL_H + +#include <fsptypes.h> +#include <fspfv.h> +#include <fspffs.h> +#include <fspapi.h> +#include <fspplatform.h> +#include <fspinfoheader.h> +#include <fsphob.h> + +void fsp_early_init(FSP_INFO_HEADER *fsp_info); +void FspNotify(u32 Phase); +void romstage_main_continue(EFI_STATUS Status, VOID *HobListPtr); +void print_hob_type_structure(u16 Hobtype, void *Hoblistptr); +void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer); +void print_fsp_info(void); + +#if CONFIG_ENABLE_FAST_BOOT +void save_mrc_data(void *hob_start); +#endif + + +/* Additional HOB types not included in the FSP: + * #define EFI_HOB_TYPE_HANDOFF 0x0001 + * #define EFI_HOB_TYPE_MEMORY_ALLOCATION 0x0002 + * #define EFI_HOB_TYPE_RESOURCE_DESCRIPTOR 0x0003 + * #define EFI_HOB_TYPE_GUID_EXTENSION 0x0004 + * #define EFI_HOB_TYPE_FV 0x0005 + * #define EFI_HOB_TYPE_CPU 0x0006 + * #define EFI_HOB_TYPE_MEMORY_POOL 0x0007 + * #define EFI_HOB_TYPE_CV 0x0008 + * #define EFI_HOB_TYPE_UNUSED 0xFFFE + * #define EFI_HOB_TYPE_END_OF_HOB_LIST 0xffff + */ +#define EFI_HOB_TYPE_HANDOFF 0x0001 +#define EFI_HOB_TYPE_MEMORY_POOL 0x0007 + +#if CONFIG_ENABLE_FAST_BOOT +#define FSP_INFO_HEADER_GUID \ + { \ + 0x912740BE, 0x2284, 0x4734, {0xB9, 0x71, 0x84, 0xB0, 0x27, 0x35, 0x3F, 0x0C} \ + } + +#define FSP_NON_VOLATILE_STORAGE_HOB_GUID \ + { \ + 0x721acf02, 0x4d77, 0x4c2a, { 0xb3, 0xdc, 0x27, 0xb, 0x7b, 0xa9, 0xe4, 0xb0 } \ + } +#endif + +/* The offset in bytes from the start of the info structure */ +#define FSP_IMAGE_SIG_LOC 0 +#define FSP_IMAGE_ID_LOC 16 +#define FSP_IMAGE_BASE_LOC 28 + +#define FSP_SIG 0x48505346 /* 'FSPH' */ + +#define ERROR_NO_FV_SIG 1 +#define ERROR_NO_FFS_GUID 2 +#define ERROR_NO_INFO_HEADER 3 +#define ERROR_IMAGEBASE_MISMATCH 4 +#define ERROR_INFO_HEAD_SIG_MISMATCH 5 +#define ERROR_FSP_SIG_MISMATCH 6 + +#ifndef __PRE_RAM__ +extern void *FspHobListPtr; +#endif + +#endif /* FSP_UTIL_H */ diff --git a/src/northbridge/intel/fsp_sandybridge/gma.c b/src/northbridge/intel/fsp_sandybridge/gma.c new file mode 100644 index 0000000..d578d56 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/gma.c @@ -0,0 +1,88 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Chromium OS Authors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +#include "chip.h" +#include "northbridge.h" + + +/* some vga option roms are used for several chipsets but they only have one + * PCI ID in their header. If we encounter such an option rom, we need to do + * the mapping ourselfes + */ + +u32 map_oprom_vendev(u32 vendev) +{ + u32 new_vendev=vendev; + + switch (vendev) { + case 0x80860102: /* GT1 Desktop */ + case 0x8086010a: /* GT1 Server */ + case 0x80860112: /* GT2 Desktop */ + case 0x80860116: /* GT2 Mobile */ + case 0x80860122: /* GT2 Desktop >=1.3GHz */ + case 0x80860126: /* GT2 Mobile >=1.3GHz */ + case 0x80860166: /* IVB */ + new_vendev=0x80860106; /* GT1 Mobile */ + break; + } + + return new_vendev; +} + +static void gma_set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations gma_pci_ops = { + .set_subsystem = gma_set_subsystem, +}; + +static struct device_operations gma_func0_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = pci_dev_init, + .scan_bus = 0, + .enable = 0, + .ops_pci = &gma_pci_ops, +}; + +static const unsigned short gma_ids[] = { + 0x0102, 0x0106, 0x010a, 0x0112, 0x0116, 0x0122, 0x0126, 0x166, + 0, +}; +static const struct pci_driver gma_gt1_desktop __pci_driver = { + .ops = &gma_func0_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices= gma_ids, +}; diff --git a/src/northbridge/intel/fsp_sandybridge/gma.h b/src/northbridge/intel/fsp_sandybridge/gma.h new file mode 100644 index 0000000..bd4c266 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/gma.h @@ -0,0 +1,168 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Chromium OS Authors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* mailbox 0: header */ +typedef struct { + u8 signature[16]; + u32 size; + u32 version; + u8 sbios_version[32]; + u8 vbios_version[16]; + u8 driver_version[16]; + u32 mailboxes; + u8 reserved[164]; +} __attribute__((packed)) opregion_header_t; + +#define IGD_OPREGION_SIGNATURE "IntelGraphicsMem" +#define IGD_OPREGION_VERSION 2 + +#define IGD_MBOX1 (1 << 0) +#define IGD_MBOX2 (1 << 1) +#define IGD_MBOX3 (1 << 2) +#define IGD_MBOX4 (1 << 3) +#define IGD_MBOX5 (1 << 4) + +#define MAILBOXES_MOBILE (IGD_MBOX1 | IGD_MBOX2 | IGD_MBOX3 | \ + IGD_MBOX4 | IGD_MBOX5) +#define MAILBOXES_DESKTOP (IGD_MBOX2 | IGD_MBOX4) + +#define SBIOS_VERSION_SIZE 32 + +/* mailbox 1: public acpi methods */ +typedef struct { + u32 drdy; + u32 csts; + u32 cevt; + u8 reserved1[20]; + u32 didl[8]; + u32 cpdl[8]; + u32 cadl[8]; + u32 nadl[8]; + u32 aslp; + u32 tidx; + u32 chpd; + u32 clid; + u32 cdck; + u32 sxsw; + u32 evts; + u32 cnot; + u32 nrdy; + u8 reserved2[60]; +} __attribute__((packed)) opregion_mailbox1_t; + +/* mailbox 2: software sci interface */ +typedef struct { + u32 scic; + u32 parm; + u32 dslp; + u8 reserved[244]; +} __attribute__((packed)) opregion_mailbox2_t; + +/* mailbox 3: power conservation */ +typedef struct { + u32 ardy; + u32 aslc; + u32 tche; + u32 alsi; + u32 bclp; + u32 pfit; + u32 cblv; + u16 bclm[20]; + u32 cpfm; + u32 epfm; + u8 plut[74]; + u32 pfmb; + u32 ccdv; + u32 pcft; + u8 reserved[94]; +} __attribute__((packed)) opregion_mailbox3_t; + +#define IGD_BACKLIGHT_BRIGHTNESS 0xff +#define IGD_INITIAL_BRIGHTNESS 0x64 + +#define IGD_FIELD_VALID (1 << 31) +#define IGD_WORD_FIELD_VALID (1 << 15) +#define IGD_PFIT_STRETCH 6 + +/* mailbox 4: vbt */ +typedef struct { + u8 gvd1[7168]; +} __attribute__((packed)) opregion_vbt_t; + +/* IGD OpRegion */ +typedef struct { + opregion_header_t header; + opregion_mailbox1_t mailbox1; + opregion_mailbox2_t mailbox2; + opregion_mailbox3_t mailbox3; + opregion_vbt_t vbt; +} __attribute__((packed)) igd_opregion_t; + +/* Intel Video BIOS (Option ROM) */ +typedef struct { + u16 signature; + u8 size; + u8 reserved[21]; + u16 pcir_offset; + u16 vbt_offset; +} __attribute__((packed)) optionrom_header_t; + +#define OPROM_SIGNATURE 0xaa55 + +typedef struct { + u32 signature; + u16 vendor; + u16 device; + u16 reserved1; + u16 length; + u8 revision; + u8 classcode[3]; + u16 imagelength; + u16 coderevision; + u8 codetype; + u8 indicator; + u16 reserved2; +} __attribute__((packed)) optionrom_pcir_t; + +typedef struct { + u8 hdr_signature[20]; + u16 hdr_version; + u16 hdr_size; + u16 hdr_vbt_size; + u8 hdr_vbt_checksum; + u8 hdr_reserved; + u32 hdr_vbt_datablock; + u32 hdr_aim[4]; + u8 datahdr_signature[16]; + u16 datahdr_version; + u16 datahdr_size; + u16 datahdr_datablocksize; + u8 coreblock_id; + u16 coreblock_size; + u16 coreblock_biossize; + u8 coreblock_biostype; + u8 coreblock_releasestatus; + u8 coreblock_hwsupported; + u8 coreblock_integratedhw; + u8 coreblock_biosbuild[4]; + u8 coreblock_biossignon[155]; +} __attribute__((packed)) optionrom_vbt_t; + +#define VBT_SIGNATURE 0x54425624 + diff --git a/src/northbridge/intel/fsp_sandybridge/mrccache.c b/src/northbridge/intel/fsp_sandybridge/mrccache.c new file mode 100644 index 0000000..a793880 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/mrccache.c @@ -0,0 +1,257 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <bootstate.h> +#include <console/console.h> +#include <cbfs.h> +#include <ip_checksum.h> +#include <device/device.h> +#include <cbmem.h> +#include "northbridge.h" +#include <spi-generic.h> +#include <spi_flash.h> +#include "fsp_util.h" + +/* convert a pointer to flash area into the offset inside the flash */ +static inline u32 to_flash_offset(void *p) { + return ((u32)p + CONFIG_VIRTUAL_ROM_SIZE); +} + +static struct mrc_data_container *next_mrc_block( + struct mrc_data_container *mrc_cache) +{ + /* MRC data blocks are aligned within the region */ + u32 mrc_size = sizeof(*mrc_cache) + mrc_cache->mrc_data_size; + if (mrc_size & (MRC_DATA_ALIGN - 1UL)) { + mrc_size &= ~(MRC_DATA_ALIGN - 1UL); + mrc_size += MRC_DATA_ALIGN; + } + + u8 *region_ptr = (u8*)mrc_cache; + region_ptr += mrc_size; + return (struct mrc_data_container *)region_ptr; +} + +static int is_mrc_cache(struct mrc_data_container *mrc_cache) +{ + return (!!mrc_cache) && (mrc_cache->mrc_signature == MRC_DATA_SIGNATURE); +} + +static u32 get_mrc_cache_region(struct mrc_data_container **mrc_region_ptr) +{ + u32 region_size; + region_size = CONFIG_MRC_CACHE_SIZE; + *mrc_region_ptr = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, + "mrc.cache", 0xac); + + return region_size; +} + +/* + * Find the largest index block in the MRC cache. Return NULL if none is + * found. + */ +static struct mrc_data_container *find_current_mrc_cache_local + (struct mrc_data_container *mrc_cache, u32 region_size) +{ + u32 region_end; + u32 entry_id = 0; + struct mrc_data_container *mrc_next = mrc_cache; + + region_end = (u32) mrc_cache + region_size; + + /* Search for the last filled entry in the region */ + while (is_mrc_cache(mrc_next)) { + entry_id++; + mrc_cache = mrc_next; + mrc_next = next_mrc_block(mrc_next); + if ((u32)mrc_next >= region_end) { + /* Stay in the MRC data region */ + break; + } + } + + if (entry_id == 0) { + printk(BIOS_ERR, "%s: No valid MRC cache found.\n", __func__); + return NULL; + } + + /* Verify checksum */ + if (mrc_cache->mrc_checksum != + compute_ip_checksum(mrc_cache->mrc_data, + mrc_cache->mrc_data_size)) { + printk(BIOS_ERR, "%s: MRC cache checksum mismatch\n", __func__); + return NULL; + } + + printk(BIOS_DEBUG, "%s: picked entry %u from cache block\n", __func__, + entry_id - 1); + + return mrc_cache; +} + +/* SPI code needs malloc/free. + * Also unknown if writing flash from XIP-flash code is a good idea + */ +#if !defined(__PRE_RAM__) +/* find the first empty block in the MRC cache area. + * If there's none, return NULL. + * + * @mrc_cache_base - base address of the MRC cache area + * @mrc_cache - current entry (for which we need to find next) + * @region_size - total size of the MRC cache area + */ +static struct mrc_data_container *find_next_mrc_cache + (struct mrc_data_container *mrc_cache_base, + struct mrc_data_container *mrc_cache, + u32 region_size) +{ + u32 region_end = (u32) mrc_cache_base + region_size; + u32 mrc_data_size = mrc_cache->mrc_data_size; + + mrc_cache = next_mrc_block(mrc_cache); + if (((u32)mrc_cache + mrc_data_size) >= region_end) { + /* Crossed the boundary */ + mrc_cache = NULL; + printk(BIOS_DEBUG, "%s: no available entries found\n", + __func__); + } else { + printk(BIOS_DEBUG, + "%s: picked next entry from cache block at %p\n", + __func__, mrc_cache); + } + + return mrc_cache; +} + +static void update_mrc_cache(void *unused) +{ + printk(BIOS_DEBUG, "Updating MRC cache data.\n"); + struct mrc_data_container *current = cbmem_find(CBMEM_ID_MRCDATA); + struct mrc_data_container *cache, *cache_base; + u32 cache_size; + + if (!current) { + printk(BIOS_ERR, "No MRC cache in cbmem. Can't update flash.\n"); + return; + } + if (current->mrc_data_size == -1) { + printk(BIOS_ERR, "MRC cache data in cbmem invalid.\n"); + return; + } + + cache_size = get_mrc_cache_region(&cache_base); + if (cache_base == NULL) { + printk(BIOS_ERR, "%s: could not find MRC cache area\n", + __func__); + return; + } + + /* + * we need to: + */ + // 0. compare MRC data to last mrc-cache block (exit if same) + cache = find_current_mrc_cache_local(cache_base, cache_size); + + if (cache && (cache->mrc_data_size == current->mrc_data_size) && + (memcmp(cache, current, cache->mrc_data_size) == 0)) { + printk(BIOS_DEBUG, + "MRC data in flash is up to date. No update.\n"); + return; + } + + // 1. use spi_flash_probe() to find the flash, then + spi_init(); + struct spi_flash *flash = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); + if (!flash) { + printk(BIOS_DEBUG, "Could not find SPI device\n"); + return; + } + + // 2. look up the first unused block + if (cache) + cache = find_next_mrc_cache(cache_base, cache, cache_size); + + /* + * 3. if no such place exists, erase entire mrc-cache range & use + * block 0. First time around the erase is not needed, but this is a + * small overhead for simpler code. + */ + if (!cache) { + printk(BIOS_DEBUG, + "Need to erase the MRC cache region of %d bytes at %p\n", + cache_size, cache_base); + + flash->erase(flash, to_flash_offset(cache_base), cache_size); + + /* we will start at the beginning again */ + cache = cache_base; + } + // 4. write mrc data with flash->write() + printk(BIOS_DEBUG, "Write MRC cache update to flash at %p\n", + cache); + flash->write(flash, to_flash_offset(cache), + current->mrc_data_size + sizeof(*current), current); +} + +static void find_fsp_hob(void *unused) +{ + /* Set the global HOB list pointer */ + FspHobListPtr = (void*)*((u32*) cbmem_find(CBMEM_ID_HOB_POINTER)); + + if (!FspHobListPtr){ + printk(BIOS_ERR, "ERROR: Could not find FSP HOB pointer in CBFS!\n"); + } else { + /* 0x0000: Print all types */ + print_hob_type_structure(0x000, FspHobListPtr); + + #if CONFIG_ENABLE_FAST_BOOT + save_mrc_data(FspHobListPtr); + update_mrc_cache(NULL); + #endif + } +} + +BOOT_STATE_INIT_ENTRIES(fsp_hob_find) = { + BOOT_STATE_INIT_ENTRY(BS_WRITE_TABLES, BS_ON_ENTRY, + find_fsp_hob, NULL), +}; +#endif /* !defined(__PRE_RAM__) */ + +struct mrc_data_container *find_current_mrc_cache(void) +{ + struct mrc_data_container *cache_base; + u32 cache_size; + + cache_size = get_mrc_cache_region(&cache_base); + if (cache_base == NULL) { + printk(BIOS_ERR, "%s: could not find MRC cache area\n", + __func__); + return NULL; + } + + /* + * we need to: + */ + // 0. compare MRC data to last mrc-cache block (exit if same) + return find_current_mrc_cache_local(cache_base, cache_size); +} diff --git a/src/northbridge/intel/fsp_sandybridge/northbridge.c b/src/northbridge/intel/fsp_sandybridge/northbridge.c new file mode 100644 index 0000000..20595ee --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/northbridge.c @@ -0,0 +1,437 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <stdint.h> +#include <delay.h> +#include <cpu/intel/fsp_model_206ax/model_206ax.h> +#include <cpu/x86/msr.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/hypertransport.h> +#include <stdlib.h> +#include <string.h> +#include <cpu/cpu.h> +#include <cbmem.h> +#include "chip.h" +#include "northbridge.h" +#include "fsp_util.h" + +static int bridge_revision_id = -1; +static u8 finished_FSP_after_pci = 0; + +int bridge_silicon_revision(void) +{ + if (bridge_revision_id < 0) { + uint8_t stepping = cpuid_eax(1) & 0xf; + uint8_t bridge_id = pci_read_config16( + dev_find_slot(0, PCI_DEVFN(0, 0)), + PCI_DEVICE_ID) & 0xf0; + bridge_revision_id = bridge_id | stepping; + } + return bridge_revision_id; +} + +/* Reserve everything between A segment and 1MB: + * + * 0xa0000 - 0xbffff: legacy VGA + * 0xc0000 - 0xcffff: VGA OPROM (needed by kernel) + * 0xe0000 - 0xfffff: SeaBIOS, if used, otherwise DMI + */ +static const int legacy_hole_base_k = 0xa0000 / 1024; +static const int legacy_hole_size_k = 384; + +static int get_pcie_bar(u32 *base, u32 *len) +{ + device_t dev; + u32 pciexbar_reg; + + *base = 0; + *len = 0; + + dev = dev_find_slot(0, PCI_DEVFN(0, 0)); + if (!dev) + return 0; + + pciexbar_reg = pci_read_config32(dev, PCIEXBAR); + + if (!(pciexbar_reg & (1 << 0))) + return 0; + + switch ((pciexbar_reg >> 1) & 3) { + case 0: // 256MB + *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)); + *len = 256 * 1024 * 1024; + return 1; + case 1: // 128M + *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); + *len = 128 * 1024 * 1024; + return 1; + case 2: // 64M + *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)); + *len = 64 * 1024 * 1024; + return 1; + } + + return 0; +} + +static void add_fixed_resources(struct device *dev, int index) +{ + struct resource *resource; + u32 pcie_config_base, pcie_config_size; + + /* Using uma_resource() here would fail as base & size cannot + * be used as-is for a single MTRR. This would cause excessive + * use of MTRRs. + * + * Use of mmio_resource() instead does not create UC holes by using + * MTRRs, but making these regions uncacheable is taken care of by + * making sure they do not overlap with any ram_resource(). + * + * The resources can be changed to use separate mmio_resource() + * calls after MTRR code is able to merge them wisely. + */ + mmio_resource(dev, index++, uma_memory_base >> 10, uma_memory_size >> 10); + + if (get_pcie_bar(&pcie_config_base, &pcie_config_size)) { + printk(BIOS_DEBUG, "Adding PCIe config bar base=0x%08x " + "size=0x%x\n", pcie_config_base, pcie_config_size); + resource = new_resource(dev, index++); + resource->base = (resource_t) pcie_config_base; + resource->size = (resource_t) pcie_config_size; + resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE | + IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; + } + + mmio_resource(dev, index++, legacy_hole_base_k, legacy_hole_size_k); +} + +static void pci_domain_set_resources(device_t dev) +{ + uint64_t tom, me_base, touud; + uint32_t tseg_base, uma_size, tolud; + uint16_t ggc; + unsigned long long tomk; + + tomk = ggc = tseg_base = uma_size = tolud = tom = me_base = touud = 0; + + /* Total Memory 2GB example: + * + * 00000000 0000MB-1992MB 1992MB RAM (writeback) + * 7c800000 1992MB-2000MB 8MB TSEG (SMRR) + * 7d000000 2000MB-2002MB 2MB GFX GTT (uncached) + * 7d200000 2002MB-2034MB 32MB GFX UMA (uncached) + * 7f200000 2034MB TOLUD + * 7f800000 2040MB MEBASE + * 7f800000 2040MB-2048MB 8MB ME UMA (uncached) + * 80000000 2048MB TOM + * 100000000 4096MB-4102MB 6MB RAM (writeback) + * + * Total Memory 4GB example: + * + * 00000000 0000MB-2768MB 2768MB RAM (writeback) + * ad000000 2768MB-2776MB 8MB TSEG (SMRR) + * ad800000 2776MB-2778MB 2MB GFX GTT (uncached) + * ada00000 2778MB-2810MB 32MB GFX UMA (uncached) + * afa00000 2810MB TOLUD + * ff800000 4088MB MEBASE + * ff800000 4088MB-4096MB 8MB ME UMA (uncached) + * 100000000 4096MB TOM + * 100000000 4096MB-5374MB 1278MB RAM (writeback) + * 14fe00000 5368MB TOUUD + */ + + /* Top of Upper Usable DRAM, including remap */ + touud = pci_read_config32(dev, TOUUD+4); + touud <<= 32; + touud |= pci_read_config32(dev, TOUUD) & ~(1UL << 0); + + /* Top of Lower Usable DRAM */ + tolud = pci_read_config32(dev, TOLUD) & ~(1UL << 0); + + /* Top of Memory - does not account for any UMA */ + tom = pci_read_config32(dev, 0xa4); + tom <<= 32; + tom |= pci_read_config32(dev, 0xa0) & ~(1UL << 0); + + printk(BIOS_DEBUG, "TOUUD 0x%llx TOLUD 0x%08x TOM 0x%llx\n", + touud, tolud, tom); + + /* ME UMA needs excluding if total memory <4GB */ + me_base = pci_read_config32(dev, 0x74); + me_base <<= 32; + me_base |= pci_read_config32(dev, 0x70); + + printk(BIOS_DEBUG, "MEBASE 0x%llx\n", me_base); + + tomk = tolud >> 10; + if (me_base == tolud) { + /* ME is from MEBASE-TOM */ + uma_size = (tom - me_base) >> 10; + /* Increment TOLUD to account for ME as RAM */ + tolud += uma_size << 10; + /* UMA starts at old TOLUD */ + uma_memory_base = tomk * 1024ULL; + uma_memory_size = uma_size * 1024ULL; + printk(BIOS_DEBUG, "ME UMA base 0x%llx size %uM\n", + me_base, uma_size >> 10); + } + + /* Graphics memory comes next */ + ggc = pci_read_config16(dev, GGC); + if (!(ggc & 2)) { + printk(BIOS_DEBUG, "IGD decoded, subtracting "); + + /* Graphics memory */ + uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL; + printk(BIOS_DEBUG, "%uM UMA", uma_size >> 10); + tomk -= uma_size; + uma_memory_base = tomk * 1024ULL; + uma_memory_size += uma_size * 1024ULL; + + /* GTT Graphics Stolen Memory Size (GGMS) */ + uma_size = ((ggc >> 8) & 0x3) * 1024ULL; + tomk -= uma_size; + uma_memory_base = tomk * 1024ULL; + uma_memory_size += uma_size * 1024ULL; + printk(BIOS_DEBUG, " and %uM GTT\n", uma_size >> 10); + } + + /* Calculate TSEG size from its base which must be below GTT */ + uma_memory_base = tomk * 1024ULL; + tseg_base = pci_read_config32(dev, 0xb8) & ~(1UL << 0); + uma_size = (uma_memory_base - tseg_base) >> 10; + tomk -= uma_size; + uma_memory_base = tomk * 1024ULL; + uma_memory_size += uma_size * 1024ULL; + printk(BIOS_DEBUG, "TSEG base 0x%08x size %uM\n", + tseg_base, uma_size >> 10); + + printk(BIOS_INFO, "Available memory below 4GB: %lluM\n", tomk >> 10); + + /* Report the memory regions */ + ram_resource(dev, 3, 0, legacy_hole_base_k); + ram_resource(dev, 4, legacy_hole_base_k + legacy_hole_size_k, + (tomk - (legacy_hole_base_k + legacy_hole_size_k))); + + /* + * If >= 4GB installed then memory from TOLUD to 4GB + * is remapped above TOM, TOUUD will account for both + */ + touud >>= 10; /* Convert to KB */ + if (touud > 4096 * 1024) { + ram_resource(dev, 5, 4096 * 1024, touud - (4096 * 1024)); + printk(BIOS_INFO, "Available memory above 4GB: %lluM\n", + (touud >> 10) - 4096); + } + + add_fixed_resources(dev, 6); + + assign_resources(dev->link_list); + + /* Leave some space for the HOB data above CBMem */ + set_top_of_ram((tomk - 2048) * 1024); +} + + /* TODO We could determine how many PCIe busses we need in + * the bar. For now that number is hardcoded to a max of 64. + * See e7525/northbridge.c for an example. + */ +static struct device_operations pci_domain_ops = { + .read_resources = pci_domain_read_resources, + .set_resources = pci_domain_set_resources, + .enable_resources = NULL, + .init = NULL, + .scan_bus = pci_domain_scan_bus, + .ops_pci_bus = pci_bus_default_ops, +}; + +static void mc_read_resources(device_t dev) +{ + struct resource *resource; + + pci_dev_read_resources(dev); + + /* So, this is one of the big mysteries in the coreboot resource + * allocator. This resource should make sure that the address space + * of the PCIe memory mapped config space bar. But it does not. + */ + + /* We use 0xcf as an unused index for our PCIe bar so that we find it again */ + resource = new_resource(dev, 0xcf); + resource->base = DEFAULT_PCIEXBAR; + resource->size = 64 * 1024 * 1024; /* 64MB hard coded PCIe config space */ + resource->flags = + IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED | + IORESOURCE_ASSIGNED; + printk(BIOS_DEBUG, "Adding PCIe enhanced config space BAR 0x%08lx-0x%08lx.\n", + (unsigned long)(resource->base), (unsigned long)(resource->base + resource->size)); +} + +static void mc_set_resources(device_t dev) +{ + struct resource *resource; + + /* Report the PCIe BAR */ + resource = find_resource(dev, 0xcf); + if (resource) { + report_resource_stored(dev, resource, "<mmconfig>"); + } + + /* And call the normal set_resources */ + pci_dev_set_resources(dev); +} + +static void intel_set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static void northbridge_init(struct device *dev) +{ + u8 bios_reset_cpl; + + /* + * Set bit 0 of BIOS_RESET_CPL to indicate to the CPU + * that BIOS has initialized memory and power management + */ + bios_reset_cpl = MCHBAR8(BIOS_RESET_CPL); + bios_reset_cpl |= 1; + MCHBAR8(BIOS_RESET_CPL) = bios_reset_cpl; + printk(BIOS_DEBUG, "Set BIOS_RESET_CPL\n"); +} + +static void northbridge_enable(device_t dev) +{ +#if CONFIG_HAVE_ACPI_RESUME + switch (pci_read_config32(dev, SKPAD)) { + case 0xcafebabe: + printk(BIOS_DEBUG, "Normal boot.\n"); + acpi_slp_type=0; + break; + case 0xcafed00d: + printk(BIOS_DEBUG, "S3 Resume.\n"); + acpi_slp_type=3; + break; + default: + printk(BIOS_DEBUG, "Unknown boot method, assuming normal.\n"); + acpi_slp_type=0; + break; + } +#endif +} + +static struct pci_operations intel_pci_ops = { + .set_subsystem = intel_set_subsystem, +}; + +static struct device_operations mc_ops = { + .read_resources = mc_read_resources, + .set_resources = mc_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = northbridge_init, + .enable = northbridge_enable, + .scan_bus = 0, + .ops_pci = &intel_pci_ops, +}; + +static const struct pci_driver mc_driver_0100 __pci_driver = { + .ops = &mc_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x0100, +}; + +static const struct pci_driver mc_driver __pci_driver = { + .ops = &mc_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x0104, /* Sandy bridge */ +}; + +static const struct pci_driver mc_driver_1 __pci_driver = { + .ops = &mc_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x0154, /* Ivy bridge */ +}; + +static void cpu_bus_init(device_t dev) +{ + initialize_cpus(dev->link_list); +} + + +static void cpu_bus_noop(device_t dev) +{ +} + +static struct device_operations cpu_bus_ops = { + .read_resources = cpu_bus_noop, + .set_resources = cpu_bus_noop, + .enable_resources = cpu_bus_noop, + .init = cpu_bus_init, + .scan_bus = 0, +}; + +static void enable_dev(device_t dev) +{ + /* Set the operations if it is a special bus type */ + if (dev->path.type == DEVICE_PATH_DOMAIN) { + dev->ops = &pci_domain_ops; + } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { + dev->ops = &cpu_bus_ops; + } + + /* + * Notify FSP for PostPciEnumeration. + * This call needs to be done before resource allocation. + */ + if (!finished_FSP_after_pci) { + finished_FSP_after_pci = 1; + printk(BIOS_DEBUG, "FspNotify(EnumInitPhaseAfterPciEnumeration)\n"); + FspNotify(EnumInitPhaseAfterPciEnumeration); + printk(BIOS_DEBUG, + "Returned from FspNotify(EnumInitPhaseAfterPciEnumeration)\n\n"); + } +} + +static void finalize_chip(void *chip_info) +{ + /* Notify FSP for ReadyToBoot */ + printk(BIOS_DEBUG, "FspNotify(EnumInitPhaseReadyToBoot)\n"); + print_fsp_info(); + FspNotify(EnumInitPhaseReadyToBoot); + printk(BIOS_DEBUG, "Returned from FspNotify(EnumInitPhaseReadyToBoot)\n"); +} + +struct chip_operations northbridge_intel_fsp_sandybridge_ops = { + CHIP_NAME("Intel i7 (SandyBridge/IvyBridge) integrated Northbridge") + .enable_dev = enable_dev, + .final = finalize_chip, +}; diff --git a/src/northbridge/intel/fsp_sandybridge/northbridge.h b/src/northbridge/intel/fsp_sandybridge/northbridge.h new file mode 100644 index 0000000..3179832 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/northbridge.h @@ -0,0 +1,245 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * Copyright (C) 2011 Google Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __NORTHBRIDGE_INTEL_SANDYBRIDGE_SANDYBRIDGE_H__ +#define __NORTHBRIDGE_INTEL_SANDYBRIDGE_SANDYBRIDGE_H__ 1 + +/* Chipset types */ +#define SANDYBRIDGE_MOBILE 0 +#define SANDYBRIDGE_DESKTOP 1 +#define SANDYBRIDGE_SERVER 2 + +/* Device ID for SandyBridge and IvyBridge */ +#define BASE_REV_SNB 0x00 +#define BASE_REV_IVB 0x50 +#define BASE_REV_MASK 0x50 + +/* SandyBridge CPU stepping */ +#define SNB_STEP_D0 (BASE_REV_SNB + 5) /* Also J0 */ +#define SNB_STEP_D1 (BASE_REV_SNB + 6) +#define SNB_STEP_D2 (BASE_REV_SNB + 7) /* Also J1/Q0 */ + +/* IvyBridge CPU stepping */ +#define IVB_STEP_A0 (BASE_REV_IVB + 0) +#define IVB_STEP_B0 (BASE_REV_IVB + 2) +#define IVB_STEP_C0 (BASE_REV_IVB + 4) +#define IVB_STEP_K0 (BASE_REV_IVB + 5) +#define IVB_STEP_D0 (BASE_REV_IVB + 6) + +/* Intel Enhanced Debug region must be 4MB */ +#define IED_SIZE 0x400000 + +/* Northbridge BARs */ +#define DEFAULT_PCIEXBAR CONFIG_MMCONF_BASE_ADDRESS /* 4 KB per PCIe device */ +#define DEFAULT_MCHBAR 0xfed10000 /* 16 KB */ +#define DEFAULT_DMIBAR 0xfed18000 /* 4 KB */ +#define DEFAULT_EPBAR 0xfed19000 /* 4 KB */ +#define DEFAULT_RCBABASE 0xfed1c000 + +#if CONFIG_SOUTHBRIDGE_INTEL_FSP_BD82X6X +#include <southbridge/intel/fsp_bd82x6x/pch.h> +#endif + +/* Everything below this line is ignored in the DSDT */ +#ifndef __ACPI__ + +/* Device 0:0.0 PCI configuration space (Host Bridge) */ + +#define EPBAR 0x40 +#define MCHBAR 0x48 +#define PCIEXBAR 0x60 +#define DMIBAR 0x68 +#define X60BAR 0x60 + +#define GGC 0x50 /* GMCH Graphics Control */ + +#define DEVEN 0x54 /* Device Enable */ +#define DEVEN_PEG60 (1 << 13) +#define DEVEN_IGD (1 << 4) +#define DEVEN_PEG10 (1 << 3) +#define DEVEN_PEG11 (1 << 2) +#define DEVEN_PEG12 (1 << 1) +#define DEVEN_HOST (1 << 0) + +#define PAM0 0x80 +#define PAM1 0x81 +#define PAM2 0x82 +#define PAM3 0x83 +#define PAM4 0x84 +#define PAM5 0x85 +#define PAM6 0x86 + +#define LAC 0x87 /* Legacy Access Control */ +#define SMRAM 0x88 /* System Management RAM Control */ +#define D_OPEN (1 << 6) +#define D_CLS (1 << 5) +#define D_LCK (1 << 4) +#define G_SMRAME (1 << 3) +#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) + +#define TOM 0xa0 +#define TOUUD 0xa8 /* Top of Upper Usable DRAM */ +#define TSEG 0xb8 /* TSEG base */ +#define TOLUD 0xbc /* Top of Low Used Memory */ + +#define SKPAD 0xdc /* Scratchpad Data */ + +/* Device 0:1.0 PCI configuration space (PCI Express) */ + +#define BCTRL1 0x3e /* 16bit */ + + +/* Device 0:2.0 PCI configuration space (Graphics Device) */ + +#define MSAC 0x62 /* Multi Size Aperture Control */ +#define SWSCI 0xe8 /* SWSCI enable */ +#define ASLS 0xfc /* OpRegion Base */ + +/* + * MCHBAR + */ + +#define MCHBAR8(x) *((volatile u8 *)(DEFAULT_MCHBAR + x)) +#define MCHBAR16(x) *((volatile u16 *)(DEFAULT_MCHBAR + x)) +#define MCHBAR32(x) *((volatile u32 *)(DEFAULT_MCHBAR + x)) +#define MCHBAR32_OR(x, or) MCHBAR32(x) = (MCHBAR32(x) | (or)) + +#define SSKPD 0x5d14 /* 16bit (scratchpad) */ +#define BIOS_RESET_CPL 0x5da8 /* 8bit */ + +/* + * EPBAR - Egress Port Root Complex Register Block + */ + +#define EPBAR8(x) *((volatile u8 *)(DEFAULT_EPBAR + x)) +#define EPBAR16(x) *((volatile u16 *)(DEFAULT_EPBAR + x)) +#define EPBAR32(x) *((volatile u32 *)(DEFAULT_EPBAR + x)) + +#define EPPVCCAP1 0x004 /* 32bit */ +#define EPPVCCAP2 0x008 /* 32bit */ + +#define EPVC0RCAP 0x010 /* 32bit */ +#define EPVC0RCTL 0x014 /* 32bit */ +#define EPVC0RSTS 0x01a /* 16bit */ + +#define EPVC1RCAP 0x01c /* 32bit */ +#define EPVC1RCTL 0x020 /* 32bit */ +#define EPVC1RSTS 0x026 /* 16bit */ + +#define EPVC1MTS 0x028 /* 32bit */ +#define EPVC1IST 0x038 /* 64bit */ + +#define EPESD 0x044 /* 32bit */ + +#define EPLE1D 0x050 /* 32bit */ +#define EPLE1A 0x058 /* 64bit */ +#define EPLE2D 0x060 /* 32bit */ +#define EPLE2A 0x068 /* 64bit */ + +#define PORTARB 0x100 /* 256bit */ + +/* + * DMIBAR + */ + +#define DMIBAR8(x) *((volatile u8 *)(DEFAULT_DMIBAR + x)) +#define DMIBAR16(x) *((volatile u16 *)(DEFAULT_DMIBAR + x)) +#define DMIBAR32(x) *((volatile u32 *)(DEFAULT_DMIBAR + x)) + +#define DMIVCECH 0x000 /* 32bit */ +#define DMIPVCCAP1 0x004 /* 32bit */ +#define DMIPVCCAP2 0x008 /* 32bit */ + +#define DMIPVCCCTL 0x00c /* 16bit */ + +#define DMIVC0RCAP 0x010 /* 32bit */ +#define DMIVC0RCTL0 0x014 /* 32bit */ +#define DMIVC0RSTS 0x01a /* 16bit */ + +#define DMIVC1RCAP 0x01c /* 32bit */ +#define DMIVC1RCTL 0x020 /* 32bit */ +#define DMIVC1RSTS 0x026 /* 16bit */ + +#define DMILE1D 0x050 /* 32bit */ +#define DMILE1A 0x058 /* 64bit */ +#define DMILE2D 0x060 /* 32bit */ +#define DMILE2A 0x068 /* 64bit */ + +#define DMILCAP 0x084 /* 32bit */ +#define DMILCTL 0x088 /* 16bit */ +#define DMILSTS 0x08a /* 16bit */ + +#define DMICTL1 0x0f0 /* 32bit */ +#define DMICTL2 0x0fc /* 32bit */ + +#define DMICC 0x208 /* 32bit */ + +#define DMIDRCCFG 0xeb4 /* 32bit */ + +#ifndef __ASSEMBLER__ +static inline void barrier(void) { asm("" ::: "memory"); } + +struct ied_header { + char signature[10]; + u32 size; + u8 reserved[34]; +} __attribute__ ((packed)); + +#define PCI_DEVICE_ID_SB 0x0104 +#define PCI_DEVICE_ID_IB 0x0154 + +#ifdef __SMM__ +void intel_sandybridge_finalize_smm(void); +#else /* !__SMM__ */ +int bridge_silicon_revision(void); +void sandybridge_early_initialization(int chipset_type); +void sandybridge_late_initialization(void); + +/* debugging functions */ +void print_pci_devices(void); +void dump_pci_device(unsigned dev); +void dump_pci_devices(void); +void dump_spd_registers(void); +void dump_mem(unsigned start, unsigned end); +void report_platform_info(void); +#endif /* !__SMM__ */ + + +#define MRC_DATA_ALIGN 0x1000 +#define MRC_DATA_SIGNATURE (('M'<<0)|('R'<<8)|('C'<<16)|('D'<<24)) + +struct mrc_data_container { + u32 mrc_signature; // "MRCD" + u32 mrc_data_size; // Actual total size of this structure + u32 mrc_checksum; // IP style checksum + u32 reserved; // For header alignment + u8 mrc_data[0]; // Variable size, platform/run time dependent. +} __attribute__ ((packed)); + +struct mrc_data_container *find_current_mrc_cache(void); +#if !defined(__PRE_RAM__) +#include "gma.h" +int init_igd_opregion(igd_opregion_t *igd_opregion); +#endif + +#endif +#endif +#endif diff --git a/src/northbridge/intel/fsp_sandybridge/raminit.c b/src/northbridge/intel/fsp_sandybridge/raminit.c new file mode 100644 index 0000000..19b48ca --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/raminit.c @@ -0,0 +1,84 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/io.h> +#include <cbmem.h> +#include <device/pci_def.h> +#include "raminit.h" +#include "northbridge.h" + +static const char* ecc_decoder[] = { + "inactive", + "active on IO", + "disabled on IO", + "active" +}; + +/* + * Dump in the log memory controller configuration as read from the memory + * controller registers. + */ +void report_memory_config(void) +{ + u32 addr_decoder_common, addr_decode_ch[2]; + int i; + + addr_decoder_common = MCHBAR32(0x5000); + addr_decode_ch[0] = MCHBAR32(0x5004); + addr_decode_ch[1] = MCHBAR32(0x5008); + + printk(BIOS_DEBUG, "memcfg DDR3 clock %d MHz\n", + (MCHBAR32(0x5e04) * 13333 * 2 + 50)/100); + printk(BIOS_DEBUG, "memcfg channel assignment: A: %d, B % d, C % d\n", + addr_decoder_common & 3, + (addr_decoder_common >> 2) & 3, + (addr_decoder_common >> 4) & 3); + + for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) { + u32 ch_conf = addr_decode_ch[i]; + printk(BIOS_DEBUG, "memcfg channel[%d] config (%8.8x):\n", + i, ch_conf); + printk(BIOS_DEBUG, " ECC %s\n", + ecc_decoder[(ch_conf >> 24) & 3]); + printk(BIOS_DEBUG, " enhanced interleave mode %s\n", + ((ch_conf >> 22) & 1) ? "on" : "off"); + printk(BIOS_DEBUG, " rank interleave %s\n", + ((ch_conf >> 21) & 1) ? "on" : "off"); + printk(BIOS_DEBUG, " DIMMA %d MB width x%d %s rank%s\n", + ((ch_conf >> 0) & 0xff) * 256, + ((ch_conf >> 19) & 1) ? 16 : 8, + ((ch_conf >> 17) & 1) ? "dual" : "single", + ((ch_conf >> 16) & 1) ? "" : ", selected"); + printk(BIOS_DEBUG, " DIMMB %d MB width x%d %s rank%s\n", + ((ch_conf >> 8) & 0xff) * 256, + ((ch_conf >> 20) & 1) ? 16 : 8, + ((ch_conf >> 18) & 1) ? "dual" : "single", + ((ch_conf >> 16) & 1) ? ", selected" : ""); + } +} + +unsigned long get_top_of_ram(void) +{ + /* Base of TSEG is top of usable DRAM */ + u32 tom = pci_read_config32(PCI_DEV(0,0,0), TSEG) & ~(1UL << 0); + tom -= 0x200000; /* 2MB for FSP HOB */ + return (unsigned long) tom; +} diff --git a/src/northbridge/intel/fsp_sandybridge/raminit.h b/src/northbridge/intel/fsp_sandybridge/raminit.h new file mode 100644 index 0000000..73e563f --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/raminit.h @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef RAMINIT_H +#define RAMINIT_H + +void report_memory_config(void); + +#endif /* RAMINIT_H */ diff --git a/src/northbridge/intel/fsp_sandybridge/report_platform.c b/src/northbridge/intel/fsp_sandybridge/report_platform.c new file mode 100644 index 0000000..22e4b4b --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/report_platform.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/cpu.h> +#include <string.h> + +#if CONFIG_SOUTHBRIDGE_INTEL_FSP_BD82X6X +#include <southbridge/intel/fsp_bd82x6x/pch.h> +#endif + +#include <arch/io.h> +#include "northbridge.h" + +static void report_cpu_info(void) +{ + struct cpuid_result cpuidr; + u32 i, index; + char cpu_string[50], *cpu_name = cpu_string; /* 48 bytes are reported */ + int vt, txt, aes; + const char *mode[] = {"NOT ", ""}; + + index = 0x80000000; + cpuidr = cpuid(index); + if (cpuidr.eax < 0x80000004) { + strcpy(cpu_string, "Platform info not available"); + } else { + u32 *p = (u32*) cpu_string; + for (i = 2; i <= 4 ; i++) { + cpuidr = cpuid(index + i); + *p++ = cpuidr.eax; + *p++ = cpuidr.ebx; + *p++ = cpuidr.ecx; + *p++ = cpuidr.edx; + } + } + /* Skip leading spaces in CPU name string */ + while (cpu_name[0] == ' ') + cpu_name++; + + cpuidr = cpuid(1); + printk(BIOS_DEBUG, "CPU id(%x): %s\n", cpuidr.eax, cpu_name); + aes = (cpuidr.ecx & (1 << 25)) ? 1 : 0; + txt = (cpuidr.ecx & (1 << 6)) ? 1 : 0; + vt = (cpuidr.ecx & (1 << 5)) ? 1 : 0; + printk(BIOS_DEBUG, "AES %ssupported, TXT %ssupported, VT %ssupported\n", + mode[aes], mode[txt], mode[vt]); +} + +/* The PCI id name match comes from Intel document 472178 */ +static struct { + u16 dev_id; + const char *dev_name; +} pch_table [] = { + {0x1E41, "Desktop Sample"}, + {0x1E42, "Mobile Sample"}, + {0x1E43, "SFF Sample"}, + {0x1E44, "Z77"}, + {0x1E45, "H71"}, + {0x1E46, "Z75"}, + {0x1E47, "Q77"}, + {0x1E48, "Q75"}, + {0x1E49, "B75"}, + {0x1E4A, "H77"}, + {0x1E53, "C216"}, + {0x1E55, "QM77"}, + {0x1E56, "QS77"}, + {0x1E58, "UM77"}, + {0x1E57, "HM77"}, + {0x1E59, "HM76"}, + {0x1E5D, "HM75"}, + {0x1E5E, "HM70"}, + {0x1E5F, "NM70"}, +}; + +static void report_pch_info(void) +{ + int i; + u16 dev_id = pci_read_config16(PCH_LPC_DEV, 2); + + + const char *pch_type = "Unknown"; + for (i = 0; i < ARRAY_SIZE(pch_table); i++) { + if (pch_table[i].dev_id == dev_id) { + pch_type = pch_table[i].dev_name; + break; + } + } + printk (BIOS_DEBUG, "PCH type: %s, device id: %x, rev id %x\n", + pch_type, dev_id, pci_read_config8(PCH_LPC_DEV, 8)); +} + +void report_platform_info(void) +{ + report_cpu_info(); + report_pch_info(); +} diff --git a/src/northbridge/intel/fsp_sandybridge/udelay.c b/src/northbridge/intel/fsp_sandybridge/udelay.c new file mode 100644 index 0000000..36febe7 --- /dev/null +++ b/src/northbridge/intel/fsp_sandybridge/udelay.c @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <delay.h> +#include <stdint.h> +#include <cpu/x86/tsc.h> +#include <cpu/x86/msr.h> + +/** + * Intel SandyBridge/IvyBridge CPUs always run the TSC at BCLK=100MHz + */ + +void udelay(u32 us) +{ + u32 dword; + tsc_t tsc, tsc1, tscd; + msr_t msr; + u32 fsb = 100, divisor; + u32 d; /* ticks per us */ + + msr = rdmsr(0xce); + divisor = (msr.lo >> 8) & 0xff; + + d = fsb * divisor; /* On Core/Core2 this is divided by 4 */ + multiply_to_tsc(&tscd, us, d); + + tsc1 = rdtsc(); + dword = tsc1.lo + tscd.lo; + if ((dword < tsc1.lo) || (dword < tscd.lo)) { + tsc1.hi++; + } + tsc1.lo = dword; + tsc1.hi += tscd.hi; + + do { + tsc = rdtsc(); + } while ((tsc.hi < tsc1.hi) + || ((tsc.hi == tsc1.hi) && (tsc.lo <= tsc1.lo))); +} diff --git a/src/vendorcode/Kconfig b/src/vendorcode/Kconfig index 18a2068..a8cbe02 100644 --- a/src/vendorcode/Kconfig +++ b/src/vendorcode/Kconfig @@ -1 +1,2 @@ source src/vendorcode/google/Kconfig +source src/vendorcode/intel/Kconfig diff --git a/src/vendorcode/Makefile.inc b/src/vendorcode/Makefile.inc index e6d6bb1..741a04a 100644 --- a/src/vendorcode/Makefile.inc +++ b/src/vendorcode/Makefile.inc @@ -1,2 +1,3 @@ subdirs-y += amd subdirs-y += google +subdirs-y += intel diff --git a/src/vendorcode/intel/Kconfig b/src/vendorcode/intel/Kconfig new file mode 100644 index 0000000..598193d --- /dev/null +++ b/src/vendorcode/intel/Kconfig @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config FSP_VENDORCODE_HEADER_PATH + string + default "fsp/ivybridge_bd82x6x/" if CPU_INTEL_FSP_MODEL_306AX && SOUTHBRIDGE_INTEL_FSP_BD82X6X diff --git a/src/vendorcode/intel/Makefile.inc b/src/vendorcode/intel/Makefile.inc new file mode 100644 index 0000000..b05838f --- /dev/null +++ b/src/vendorcode/intel/Makefile.inc @@ -0,0 +1,24 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ifneq ($(CONFIG_FSP_VENDORCODE_HEADER_PATH),) +FSP_PATH := $(call strip_quotes,$(CONFIG_FSP_VENDORCODE_HEADER_PATH)) +ramstage-y += $(FSP_PATH)srx/fsphob.c +CC := $(CC) -Isrc/vendorcode/intel/$(FSP_PATH)include +endif \ No newline at end of file diff --git a/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspapi.h b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspapi.h new file mode 100755 index 0000000..9520736 --- /dev/null +++ b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspapi.h @@ -0,0 +1,63 @@ +/** @file + +Copyright (C) 2013, Intel Corporation + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _FSP_API_H_ +#define _FSP_API_H_ + +#pragma pack(1) + +typedef VOID (* CONTINUATION_PROC)(EFI_STATUS Status, VOID *HobListPtr); + +typedef struct { + VOID *NvsBufferPtr; + VOID *RtBufferPtr; + CONTINUATION_PROC ContinuationFunc; +} FSP_INIT_PARAMS; + +typedef struct { + UINT32 *StackTop; + UINT32 BootMode; +} FSP_INIT_RT_COMMON_BUFFER; + +typedef enum { + EnumInitPhaseAfterPciEnumeration = 0x20, + EnumInitPhaseReadyToBoot = 0x40 +} FSP_INIT_PHASE; + +typedef struct { + FSP_INIT_PHASE Phase; +} NOTIFY_PHASE_PARAMS; + +#pragma pack() + +typedef FSP_STATUS (FSPAPI *FSP_FSP_INIT) (FSP_INIT_PARAMS *FspInitParamPtr); +typedef FSP_STATUS (FSPAPI *FSP_NOTFY_PHASE) (NOTIFY_PHASE_PARAMS *NotifyPhaseParamPtr); + +#endif diff --git a/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspffs.h b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspffs.h new file mode 100755 index 0000000..83c5e85 --- /dev/null +++ b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspffs.h @@ -0,0 +1,507 @@ +/** @file + +Copyright (C) 2013, Intel Corporation + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + + +#ifndef __PI_FIRMWARE_FILE_H__ +#define __PI_FIRMWARE_FILE_H__ + +#pragma pack(1) +/// +/// Used to verify the integrity of the file. +/// +typedef union { + struct { + /// + /// The IntegrityCheck.Checksum.Header field is an 8-bit checksum of the file + /// header. The State and IntegrityCheck.Checksum.File fields are assumed + /// to be zero and the checksum is calculated such that the entire header sums to zero. + /// + UINT8 Header; + /// + /// If the FFS_ATTRIB_CHECKSUM (see definition below) bit of the Attributes + /// field is set to one, the IntegrityCheck.Checksum.File field is an 8-bit + /// checksum of the file data. + /// If the FFS_ATTRIB_CHECKSUM bit of the Attributes field is cleared to zero, + /// the IntegrityCheck.Checksum.File field must be initialized with a value of + /// 0xAA. The IntegrityCheck.Checksum.File field is valid any time the + /// EFI_FILE_DATA_VALID bit is set in the State field. + /// + UINT8 File; + } Checksum; + /// + /// This is the full 16 bits of the IntegrityCheck field. + /// + UINT16 Checksum16; +} EFI_FFS_INTEGRITY_CHECK; + +/// +/// FFS_FIXED_CHECKSUM is the checksum value used when the +/// FFS_ATTRIB_CHECKSUM attribute bit is clear. +/// +#define FFS_FIXED_CHECKSUM 0xAA + +typedef UINT8 EFI_FV_FILETYPE; +typedef UINT8 EFI_FFS_FILE_ATTRIBUTES; +typedef UINT8 EFI_FFS_FILE_STATE; + +/// +/// File Types Definitions +/// +#define EFI_FV_FILETYPE_ALL 0x00 +#define EFI_FV_FILETYPE_RAW 0x01 +#define EFI_FV_FILETYPE_FREEFORM 0x02 +#define EFI_FV_FILETYPE_SECURITY_CORE 0x03 +#define EFI_FV_FILETYPE_PEI_CORE 0x04 +#define EFI_FV_FILETYPE_DXE_CORE 0x05 +#define EFI_FV_FILETYPE_PEIM 0x06 +#define EFI_FV_FILETYPE_DRIVER 0x07 +#define EFI_FV_FILETYPE_COMBINED_PEIM_DRIVER 0x08 +#define EFI_FV_FILETYPE_APPLICATION 0x09 +#define EFI_FV_FILETYPE_SMM 0x0A +#define EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE 0x0B +#define EFI_FV_FILETYPE_COMBINED_SMM_DXE 0x0C +#define EFI_FV_FILETYPE_SMM_CORE 0x0D +#define EFI_FV_FILETYPE_OEM_MIN 0xc0 +#define EFI_FV_FILETYPE_OEM_MAX 0xdf +#define EFI_FV_FILETYPE_DEBUG_MIN 0xe0 +#define EFI_FV_FILETYPE_DEBUG_MAX 0xef +#define EFI_FV_FILETYPE_FFS_MIN 0xf0 +#define EFI_FV_FILETYPE_FFS_MAX 0xff +#define EFI_FV_FILETYPE_FFS_PAD 0xf0 +/// +/// FFS File Attributes. +/// +#define FFS_ATTRIB_LARGE_FILE 0x01 +#define FFS_ATTRIB_FIXED 0x04 +#define FFS_ATTRIB_DATA_ALIGNMENT 0x38 +#define FFS_ATTRIB_CHECKSUM 0x40 + +/// +/// FFS File State Bits. +/// +#define EFI_FILE_HEADER_CONSTRUCTION 0x01 +#define EFI_FILE_HEADER_VALID 0x02 +#define EFI_FILE_DATA_VALID 0x04 +#define EFI_FILE_MARKED_FOR_UPDATE 0x08 +#define EFI_FILE_DELETED 0x10 +#define EFI_FILE_HEADER_INVALID 0x20 + + +/// +/// Each file begins with the header that describe the +/// contents and state of the files. +/// +typedef struct { + /// + /// This GUID is the file name. It is used to uniquely identify the file. + /// + EFI_GUID Name; + /// + /// Used to verify the integrity of the file. + /// + EFI_FFS_INTEGRITY_CHECK IntegrityCheck; + /// + /// Identifies the type of file. + /// + EFI_FV_FILETYPE Type; + /// + /// Declares various file attribute bits. + /// + EFI_FFS_FILE_ATTRIBUTES Attributes; + /// + /// The length of the file in bytes, including the FFS header. + /// + UINT8 Size[3]; + /// + /// Used to track the state of the file throughout the life of the file from creation to deletion. + /// + EFI_FFS_FILE_STATE State; +} EFI_FFS_FILE_HEADER; + +typedef struct { + /// + /// This GUID is the file name. It is used to uniquely identify the file. There may be only + /// one instance of a file with the file name GUID of Name in any given firmware + /// volume, except if the file type is EFI_FV_FILETYPE_FFS_PAD. + /// + EFI_GUID Name; + + /// + /// Used to verify the integrity of the file. + /// + EFI_FFS_INTEGRITY_CHECK IntegrityCheck; + + /// + /// Identifies the type of file. + /// + EFI_FV_FILETYPE Type; + + /// + /// Declares various file attribute bits. + /// + EFI_FFS_FILE_ATTRIBUTES Attributes; + + /// + /// The length of the file in bytes, including the FFS header. + /// The length of the file data is either (Size - sizeof(EFI_FFS_FILE_HEADER)). This calculation means a + /// zero-length file has a Size of 24 bytes, which is sizeof(EFI_FFS_FILE_HEADER). + /// Size is not required to be a multiple of 8 bytes. Given a file F, the next file header is + /// located at the next 8-byte aligned firmware volume offset following the last byte of the file F. + /// + UINT8 Size[3]; + + /// + /// Used to track the state of the file throughout the life of the file from creation to deletion. + /// + EFI_FFS_FILE_STATE State; + + /// + /// If FFS_ATTRIB_LARGE_FILE is set in Attributes, then ExtendedSize exists and Size must be set to zero. + /// If FFS_ATTRIB_LARGE_FILE is not set then EFI_FFS_FILE_HEADER is used. + /// + UINT32 ExtendedSize; +} EFI_FFS_FILE_HEADER2; + +#define IS_FFS_FILE2(FfsFileHeaderPtr) \ + (((((EFI_FFS_FILE_HEADER *) (UINTN) FfsFileHeaderPtr)->Attributes) & FFS_ATTRIB_LARGE_FILE) == FFS_ATTRIB_LARGE_FILE) + +#define FFS_FILE_SIZE(FfsFileHeaderPtr) \ + ((UINT32) (*((UINT32 *) ((EFI_FFS_FILE_HEADER *) (UINTN) FfsFileHeaderPtr)->Size) & 0x00ffffff)) + +#define FFS_FILE2_SIZE(FfsFileHeaderPtr) \ + (((EFI_FFS_FILE_HEADER2 *) (UINTN) FfsFileHeaderPtr)->ExtendedSize) + +typedef UINT8 EFI_SECTION_TYPE; + +/// +/// Pseudo type. It is used as a wild card when retrieving sections. +/// The section type EFI_SECTION_ALL matches all section types. +/// +#define EFI_SECTION_ALL 0x00 + +/// +/// Encapsulation section Type values. +/// +#define EFI_SECTION_COMPRESSION 0x01 + +#define EFI_SECTION_GUID_DEFINED 0x02 + +#define EFI_SECTION_DISPOSABLE 0x03 + +/// +/// Leaf section Type values. +/// +#define EFI_SECTION_PE32 0x10 +#define EFI_SECTION_PIC 0x11 +#define EFI_SECTION_TE 0x12 +#define EFI_SECTION_DXE_DEPEX 0x13 +#define EFI_SECTION_VERSION 0x14 +#define EFI_SECTION_USER_INTERFACE 0x15 +#define EFI_SECTION_COMPATIBILITY16 0x16 +#define EFI_SECTION_FIRMWARE_VOLUME_IMAGE 0x17 +#define EFI_SECTION_FREEFORM_SUBTYPE_GUID 0x18 +#define EFI_SECTION_RAW 0x19 +#define EFI_SECTION_PEI_DEPEX 0x1B +#define EFI_SECTION_SMM_DEPEX 0x1C + +/// +/// Common section header. +/// +typedef struct { + /// + /// A 24-bit unsigned integer that contains the total size of the section in bytes, + /// including the EFI_COMMON_SECTION_HEADER. + /// + UINT8 Size[3]; + EFI_SECTION_TYPE Type; + /// + /// Declares the section type. + /// +} EFI_COMMON_SECTION_HEADER; + +typedef struct { + /// + /// A 24-bit unsigned integer that contains the total size of the section in bytes, + /// including the EFI_COMMON_SECTION_HEADER. + /// + UINT8 Size[3]; + + EFI_SECTION_TYPE Type; + + /// + /// If Size is 0xFFFFFF, then ExtendedSize contains the size of the section. If + /// Size is not equal to 0xFFFFFF, then this field does not exist. + /// + UINT32 ExtendedSize; +} EFI_COMMON_SECTION_HEADER2; + +/// +/// Leaf section type that contains an +/// IA-32 16-bit executable image. +/// +typedef EFI_COMMON_SECTION_HEADER EFI_COMPATIBILITY16_SECTION; +typedef EFI_COMMON_SECTION_HEADER2 EFI_COMPATIBILITY16_SECTION2; + +/// +/// CompressionType of EFI_COMPRESSION_SECTION. +/// +#define EFI_NOT_COMPRESSED 0x00 +#define EFI_STANDARD_COMPRESSION 0x01 +/// +/// An encapsulation section type in which the +/// section data is compressed. +/// +typedef struct { + /// + /// Usual common section header. CommonHeader.Type = EFI_SECTION_COMPRESSION. + /// + EFI_COMMON_SECTION_HEADER CommonHeader; + /// + /// The UINT32 that indicates the size of the section data after decompression. + /// + UINT32 UncompressedLength; + /// + /// Indicates which compression algorithm is used. + /// + UINT8 CompressionType; +} EFI_COMPRESSION_SECTION; + +typedef struct { + /// + /// Usual common section header. CommonHeader.Type = EFI_SECTION_COMPRESSION. + /// + EFI_COMMON_SECTION_HEADER2 CommonHeader; + /// + /// UINT32 that indicates the size of the section data after decompression. + /// + UINT32 UncompressedLength; + /// + /// Indicates which compression algorithm is used. + /// + UINT8 CompressionType; +} EFI_COMPRESSION_SECTION2; + +/// +/// An encapsulation section type in which the section data is disposable. +/// A disposable section is an encapsulation section in which the section data may be disposed of during +/// the process of creating or updating a firmware image without significant impact on the usefulness of +/// the file. The Type field in the section header is set to EFI_SECTION_DISPOSABLE. This +/// allows optional or descriptive data to be included with the firmware file which can be removed in +/// order to conserve space. The contents of this section are implementation specific, but might contain +/// debug data or detailed integration instructions. +/// +typedef EFI_COMMON_SECTION_HEADER EFI_DISPOSABLE_SECTION; +typedef EFI_COMMON_SECTION_HEADER2 EFI_DISPOSABLE_SECTION2; + +/// +/// The leaf section which could be used to determine the dispatch order of DXEs. +/// +typedef EFI_COMMON_SECTION_HEADER EFI_DXE_DEPEX_SECTION; +typedef EFI_COMMON_SECTION_HEADER2 EFI_DXE_DEPEX_SECTION2; + +/// +/// The leaf section which contains a PI FV. +/// +typedef EFI_COMMON_SECTION_HEADER EFI_FIRMWARE_VOLUME_IMAGE_SECTION; +typedef EFI_COMMON_SECTION_HEADER2 EFI_FIRMWARE_VOLUME_IMAGE_SECTION2; + +/// +/// The leaf section which contains a single GUID. +/// +typedef struct { + /// + /// Common section header. CommonHeader.Type = EFI_SECTION_FREEFORM_SUBTYPE_GUID. + /// + EFI_COMMON_SECTION_HEADER CommonHeader; + /// + /// This GUID is defined by the creator of the file. It is a vendor-defined file type. + /// + EFI_GUID SubTypeGuid; +} EFI_FREEFORM_SUBTYPE_GUID_SECTION; + +typedef struct { + /// + /// The common section header. CommonHeader.Type = EFI_SECTION_FREEFORM_SUBTYPE_GUID. + /// + EFI_COMMON_SECTION_HEADER2 CommonHeader; + /// + /// This GUID is defined by the creator of the file. It is a vendor-defined file type. + /// + EFI_GUID SubTypeGuid; +} EFI_FREEFORM_SUBTYPE_GUID_SECTION2; + +/// +/// Attributes of EFI_GUID_DEFINED_SECTION. +/// +#define EFI_GUIDED_SECTION_PROCESSING_REQUIRED 0x01 +#define EFI_GUIDED_SECTION_AUTH_STATUS_VALID 0x02 +/// +/// The leaf section which is encapsulation defined by specific GUID. +/// +typedef struct { + /// + /// The common section header. CommonHeader.Type = EFI_SECTION_GUID_DEFINED. + /// + EFI_COMMON_SECTION_HEADER CommonHeader; + /// + /// The GUID that defines the format of the data that follows. It is a vendor-defined section type. + /// + EFI_GUID SectionDefinitionGuid; + /// + /// Contains the offset in bytes from the beginning of the common header to the first byte of the data. + /// + UINT16 DataOffset; + /// + /// The bit field that declares some specific characteristics of the section contents. + /// + UINT16 Attributes; +} EFI_GUID_DEFINED_SECTION; + +typedef struct { + /// + /// The common section header. CommonHeader.Type = EFI_SECTION_GUID_DEFINED. + /// + EFI_COMMON_SECTION_HEADER2 CommonHeader; + /// + /// The GUID that defines the format of the data that follows. It is a vendor-defined section type. + /// + EFI_GUID SectionDefinitionGuid; + /// + /// Contains the offset in bytes from the beginning of the common header to the first byte of the data. + /// + UINT16 DataOffset; + /// + /// The bit field that declares some specific characteristics of the section contents. + /// + UINT16 Attributes; +} EFI_GUID_DEFINED_SECTION2; + +/// +/// The leaf section which contains PE32+ image. +/// +typedef EFI_COMMON_SECTION_HEADER EFI_PE32_SECTION; +typedef EFI_COMMON_SECTION_HEADER2 EFI_PE32_SECTION2; + +/// +/// The leaf section used to determine the dispatch order of PEIMs. +/// +typedef EFI_COMMON_SECTION_HEADER EFI_PEI_DEPEX_SECTION; +typedef EFI_COMMON_SECTION_HEADER2 EFI_PEI_DEPEX_SECTION2; + +/// +/// A leaf section type that contains a position-independent-code (PIC) image. +/// A PIC image section is a leaf section that contains a position-independent-code (PIC) image. +/// In addition to normal PE32+ images that contain relocation information, PEIM executables may be +/// PIC and are referred to as PIC images. A PIC image is the same as a PE32+ image except that all +/// relocation information has been stripped from the image and the image can be moved and will +/// execute correctly without performing any relocation or other fix-ups. EFI_PIC_SECTION2 must +/// be used if the section is 16MB or larger. +/// +typedef EFI_COMMON_SECTION_HEADER EFI_PIC_SECTION; +typedef EFI_COMMON_SECTION_HEADER2 EFI_PIC_SECTION2; + +/// +/// The leaf section which constains the position-independent-code image. +/// +typedef EFI_COMMON_SECTION_HEADER EFI_TE_SECTION; +typedef EFI_COMMON_SECTION_HEADER2 EFI_TE_SECTION2; + +/// +/// The leaf section which contains an array of zero or more bytes. +/// +typedef EFI_COMMON_SECTION_HEADER EFI_RAW_SECTION; +typedef EFI_COMMON_SECTION_HEADER2 EFI_RAW_SECTION2; + +/// +/// The SMM dependency expression section is a leaf section that contains a dependency expression that +/// is used to determine the dispatch order for SMM drivers. Before the SMRAM invocation of the +/// SMM driver's entry point, this dependency expression must evaluate to TRUE. See the Platform +/// Initialization Specification, Volume 2, for details regarding the format of the dependency expression. +/// The dependency expression may refer to protocols installed in either the UEFI or the SMM protocol +/// database. EFI_SMM_DEPEX_SECTION2 must be used if the section is 16MB or larger. +/// +typedef EFI_COMMON_SECTION_HEADER EFI_SMM_DEPEX_SECTION; +typedef EFI_COMMON_SECTION_HEADER2 EFI_SMM_DEPEX_SECTION2; + +/// +/// The leaf section which contains a unicode string that +/// is human readable file name. +/// +typedef struct { + EFI_COMMON_SECTION_HEADER CommonHeader; + + /// + /// Array of unicode string. + /// + CHAR16 FileNameString[1]; +} EFI_USER_INTERFACE_SECTION; + +typedef struct { + EFI_COMMON_SECTION_HEADER2 CommonHeader; + CHAR16 FileNameString[1]; +} EFI_USER_INTERFACE_SECTION2; + +/// +/// The leaf section which contains a numeric build number and +/// an optional unicode string that represents the file revision. +/// +typedef struct { + EFI_COMMON_SECTION_HEADER CommonHeader; + UINT16 BuildNumber; + + /// + /// Array of unicode string. + /// + CHAR16 VersionString[1]; +} EFI_VERSION_SECTION; + +typedef struct { + EFI_COMMON_SECTION_HEADER2 CommonHeader; + /// + /// A UINT16 that represents a particular build. Subsequent builds have monotonically + /// increasing build numbers relative to earlier builds. + /// + UINT16 BuildNumber; + CHAR16 VersionString[1]; +} EFI_VERSION_SECTION2; + +#define IS_SECTION2(SectionHeaderPtr) \ + ((UINT32) (*((UINT32 *) ((EFI_COMMON_SECTION_HEADER *) (UINTN) SectionHeaderPtr)->Size) & 0x00ffffff) == 0x00ffffff) + +#define SECTION_SIZE(SectionHeaderPtr) \ + ((UINT32) (*((UINT32 *) ((EFI_COMMON_SECTION_HEADER *) (UINTN) SectionHeaderPtr)->Size) & 0x00ffffff)) + +#define SECTION2_SIZE(SectionHeaderPtr) \ + (((EFI_COMMON_SECTION_HEADER2 *) (UINTN) SectionHeaderPtr)->ExtendedSize) + +#pragma pack() + +#endif + diff --git a/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspfv.h b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspfv.h new file mode 100755 index 0000000..75d17fa --- /dev/null +++ b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspfv.h @@ -0,0 +1,247 @@ +/** @file + +Copyright (C) 2013, Intel Corporation + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef __PI_FIRMWAREVOLUME_H__ +#define __PI_FIRMWAREVOLUME_H__ + +/// +/// EFI_FV_FILE_ATTRIBUTES +/// +typedef UINT32 EFI_FV_FILE_ATTRIBUTES; + +// +// Value of EFI_FV_FILE_ATTRIBUTES. +// +#define EFI_FV_FILE_ATTRIB_ALIGNMENT 0x0000001F +#define EFI_FV_FILE_ATTRIB_FIXED 0x00000100 +#define EFI_FV_FILE_ATTRIB_MEMORY_MAPPED 0x00000200 + +/// +/// type of EFI FVB attribute +/// +typedef UINT32 EFI_FVB_ATTRIBUTES_2; + +// +// Attributes bit definitions +// +#define EFI_FVB2_READ_DISABLED_CAP 0x00000001 +#define EFI_FVB2_READ_ENABLED_CAP 0x00000002 +#define EFI_FVB2_READ_STATUS 0x00000004 +#define EFI_FVB2_WRITE_DISABLED_CAP 0x00000008 +#define EFI_FVB2_WRITE_ENABLED_CAP 0x00000010 +#define EFI_FVB2_WRITE_STATUS 0x00000020 +#define EFI_FVB2_LOCK_CAP 0x00000040 +#define EFI_FVB2_LOCK_STATUS 0x00000080 +#define EFI_FVB2_STICKY_WRITE 0x00000200 +#define EFI_FVB2_MEMORY_MAPPED 0x00000400 +#define EFI_FVB2_ERASE_POLARITY 0x00000800 +#define EFI_FVB2_READ_LOCK_CAP 0x00001000 +#define EFI_FVB2_READ_LOCK_STATUS 0x00002000 +#define EFI_FVB2_WRITE_LOCK_CAP 0x00004000 +#define EFI_FVB2_WRITE_LOCK_STATUS 0x00008000 +#define EFI_FVB2_ALIGNMENT 0x001F0000 +#define EFI_FVB2_ALIGNMENT_1 0x00000000 +#define EFI_FVB2_ALIGNMENT_2 0x00010000 +#define EFI_FVB2_ALIGNMENT_4 0x00020000 +#define EFI_FVB2_ALIGNMENT_8 0x00030000 +#define EFI_FVB2_ALIGNMENT_16 0x00040000 +#define EFI_FVB2_ALIGNMENT_32 0x00050000 +#define EFI_FVB2_ALIGNMENT_64 0x00060000 +#define EFI_FVB2_ALIGNMENT_128 0x00070000 +#define EFI_FVB2_ALIGNMENT_256 0x00080000 +#define EFI_FVB2_ALIGNMENT_512 0x00090000 +#define EFI_FVB2_ALIGNMENT_1K 0x000A0000 +#define EFI_FVB2_ALIGNMENT_2K 0x000B0000 +#define EFI_FVB2_ALIGNMENT_4K 0x000C0000 +#define EFI_FVB2_ALIGNMENT_8K 0x000D0000 +#define EFI_FVB2_ALIGNMENT_16K 0x000E0000 +#define EFI_FVB2_ALIGNMENT_32K 0x000F0000 +#define EFI_FVB2_ALIGNMENT_64K 0x00100000 +#define EFI_FVB2_ALIGNMENT_128K 0x00110000 +#define EFI_FVB2_ALIGNMENT_256K 0x00120000 +#define EFI_FVB2_ALIGNMENT_512K 0x00130000 +#define EFI_FVB2_ALIGNMENT_1M 0x00140000 +#define EFI_FVB2_ALIGNMENT_2M 0x00150000 +#define EFI_FVB2_ALIGNMENT_4M 0x00160000 +#define EFI_FVB2_ALIGNMENT_8M 0x00170000 +#define EFI_FVB2_ALIGNMENT_16M 0x00180000 +#define EFI_FVB2_ALIGNMENT_32M 0x00190000 +#define EFI_FVB2_ALIGNMENT_64M 0x001A0000 +#define EFI_FVB2_ALIGNMENT_128M 0x001B0000 +#define EFI_FVB2_ALIGNMENT_256M 0x001C0000 +#define EFI_FVB2_ALIGNMENT_512M 0x001D0000 +#define EFI_FVB2_ALIGNMENT_1G 0x001E0000 +#define EFI_FVB2_ALIGNMENT_2G 0x001F0000 + + +typedef struct { + /// + /// The number of sequential blocks which are of the same size. + /// + UINT32 NumBlocks; + /// + /// The size of the blocks. + /// + UINT32 Length; +} EFI_FV_BLOCK_MAP_ENTRY; + +/// +/// Describes the features and layout of the firmware volume. +/// +typedef struct { + /// + /// The first 16 bytes are reserved to allow for the reset vector of + /// processors whose reset vector is at address 0. + /// + UINT8 ZeroVector[16]; + /// + /// Declares the file system with which the firmware volume is formatted. + /// + EFI_GUID FileSystemGuid; + /// + /// Length in bytes of the complete firmware volume, including the header. + /// + UINT64 FvLength; + /// + /// Set to EFI_FVH_SIGNATURE + /// + UINT32 Signature; + /// + /// Declares capabilities and power-on defaults for the firmware volume. + /// + EFI_FVB_ATTRIBUTES_2 Attributes; + /// + /// Length in bytes of the complete firmware volume header. + /// + UINT16 HeaderLength; + /// + /// A 16-bit checksum of the firmware volume header. A valid header sums to zero. + /// + UINT16 Checksum; + /// + /// Offset, relative to the start of the header, of the extended header + /// (EFI_FIRMWARE_VOLUME_EXT_HEADER) or zero if there is no extended header. + /// + UINT16 ExtHeaderOffset; + /// + /// This field must always be set to zero. + /// + UINT8 Reserved[1]; + /// + /// Set to 2. Future versions of this specification may define new header fields and will + /// increment the Revision field accordingly. + /// + UINT8 Revision; + /// + /// An array of run-length encoded FvBlockMapEntry structures. The array is + /// terminated with an entry of {0,0}. + /// + EFI_FV_BLOCK_MAP_ENTRY BlockMap[1]; +} EFI_FIRMWARE_VOLUME_HEADER; + +#define EFI_FVH_SIGNATURE SIGNATURE_32 ('_', 'F', 'V', 'H') + +/// +/// Firmware Volume Header Revision definition +/// +#define EFI_FVH_REVISION 0x02 + +/// +/// Extension header pointed by ExtHeaderOffset of volume header. +/// +typedef struct { + /// + /// Firmware volume name. + /// + EFI_GUID FvName; + /// + /// Size of the rest of the extension header, including this structure. + /// + UINT32 ExtHeaderSize; +} EFI_FIRMWARE_VOLUME_EXT_HEADER; + +/// +/// Entry struture for describing FV extension header +/// +typedef struct { + /// + /// Size of this header extension. + /// + UINT16 ExtEntrySize; + /// + /// Type of the header. + /// + UINT16 ExtEntryType; +} EFI_FIRMWARE_VOLUME_EXT_ENTRY; + +#define EFI_FV_EXT_TYPE_OEM_TYPE 0x01 +/// +/// This extension header provides a mapping between a GUID and an OEM file type. +/// +typedef struct { + /// + /// Standard extension entry, with the type EFI_FV_EXT_TYPE_OEM_TYPE. + /// + EFI_FIRMWARE_VOLUME_EXT_ENTRY Hdr; + /// + /// A bit mask, one bit for each file type between 0xC0 (bit 0) and 0xDF (bit 31). If a bit + /// is '1', then the GUID entry exists in Types. If a bit is '0' then no GUID entry exists in Types. + /// + UINT32 TypeMask; + /// + /// An array of GUIDs, each GUID representing an OEM file type. + /// + /// EFI_GUID Types[1]; + /// +} EFI_FIRMWARE_VOLUME_EXT_ENTRY_OEM_TYPE; + +#define EFI_FV_EXT_TYPE_GUID_TYPE 0x0002 + +/// +/// This extension header EFI_FIRMWARE_VOLUME_EXT_ENTRY_GUID_TYPE provides a vendor specific +/// GUID FormatType type which includes a length and a successive series of data bytes. +/// +typedef struct { + /// + /// Standard extension entry, with the type EFI_FV_EXT_TYPE_OEM_TYPE. + /// + EFI_FIRMWARE_VOLUME_EXT_ENTRY Hdr; + /// + /// Vendor-specific GUID. + /// + EFI_GUID FormatType; + /// + /// An arry of bytes of length Length. + /// + /// UINT8 Data[1]; + /// +} EFI_FIRMWARE_VOLUME_EXT_ENTRY_GUID_TYPE; + +#endif diff --git a/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fsphob.h b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fsphob.h new file mode 100755 index 0000000..5840907 --- /dev/null +++ b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fsphob.h @@ -0,0 +1,507 @@ +/** @file + +Copyright (C) 2013, Intel Corporation + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef __PI_HOB_H__ +#define __PI_HOB_H__ + +// +// HobType of EFI_HOB_GENERIC_HEADER. +// +#define EFI_HOB_TYPE_MEMORY_ALLOCATION 0x0002 +#define EFI_HOB_TYPE_RESOURCE_DESCRIPTOR 0x0003 +#define EFI_HOB_TYPE_GUID_EXTENSION 0x0004 +#define EFI_HOB_TYPE_UNUSED 0xFFFE +#define EFI_HOB_TYPE_END_OF_HOB_LIST 0xFFFF + +/// +/// Describes the format and size of the data inside the HOB. +/// All HOBs must contain this generic HOB header. +/// +typedef struct { + /// + /// Identifies the HOB data structure type. + /// + UINT16 HobType; + /// + /// The length in bytes of the HOB. + /// + UINT16 HobLength; + /// + /// This field must always be set to zero. + /// + UINT32 Reserved; +} EFI_HOB_GENERIC_HEADER; + +/// +/// Enumeration of memory types introduced in UEFI. +/// +typedef enum { + /// + /// Not used. + /// + EfiReservedMemoryType, + /// + /// The code portions of a loaded application. + /// (Note that UEFI OS loaders are UEFI applications.) + /// + EfiLoaderCode, + /// + /// The data portions of a loaded application and the default data allocation + /// type used by an application to allocate pool memory. + /// + EfiLoaderData, + /// + /// The code portions of a loaded Boot Services Driver. + /// + EfiBootServicesCode, + /// + /// The data portions of a loaded Boot Serves Driver, and the default data + /// allocation type used by a Boot Services Driver to allocate pool memory. + /// + EfiBootServicesData, + /// + /// The code portions of a loaded Runtime Services Driver. + /// + EfiRuntimeServicesCode, + /// + /// The data portions of a loaded Runtime Services Driver and the default + /// data allocation type used by a Runtime Services Driver to allocate pool memory. + /// + EfiRuntimeServicesData, + /// + /// Free (unallocated) memory. + /// + EfiConventionalMemory, + /// + /// Memory in which errors have been detected. + /// + EfiUnusableMemory, + /// + /// Memory that holds the ACPI tables. + /// + EfiACPIReclaimMemory, + /// + /// Address space reserved for use by the firmware. + /// + EfiACPIMemoryNVS, + /// + /// Used by system firmware to request that a memory-mapped IO region + /// be mapped by the OS to a virtual address so it can be accessed by EFI runtime services. + /// + EfiMemoryMappedIO, + /// + /// System memory-mapped IO region that is used to translate memory + /// cycles to IO cycles by the processor. + /// + EfiMemoryMappedIOPortSpace, + /// + /// Address space reserved by the firmware for code that is part of the processor. + /// + EfiPalCode, + EfiMaxMemoryType +} EFI_MEMORY_TYPE; + +/// +/// EFI_HOB_MEMORY_ALLOCATION_HEADER describes the +/// various attributes of the logical memory allocation. The type field will be used for +/// subsequent inclusion in the UEFI memory map. +/// +typedef struct { + /// + /// A GUID that defines the memory allocation region's type and purpose, as well as + /// other fields within the memory allocation HOB. This GUID is used to define the + /// additional data within the HOB that may be present for the memory allocation HOB. + /// Type EFI_GUID is defined in InstallProtocolInterface() in the UEFI 2.0 + /// specification. + /// + EFI_GUID Name; + + /// + /// The base address of memory allocated by this HOB. Type + /// EFI_PHYSICAL_ADDRESS is defined in AllocatePages() in the UEFI 2.0 + /// specification. + /// + EFI_PHYSICAL_ADDRESS MemoryBaseAddress; + + /// + /// The length in bytes of memory allocated by this HOB. + /// + UINT64 MemoryLength; + + /// + /// Defines the type of memory allocated by this HOB. The memory type definition + /// follows the EFI_MEMORY_TYPE definition. Type EFI_MEMORY_TYPE is defined + /// in AllocatePages() in the UEFI 2.0 specification. + /// + EFI_MEMORY_TYPE MemoryType; + + /// + /// Padding for Itanium processor family + /// + UINT8 Reserved[4]; +} EFI_HOB_MEMORY_ALLOCATION_HEADER; + +/// +/// Describes all memory ranges used during the HOB producer +/// phase that exist outside the HOB list. This HOB type +/// describes how memory is used, not the physical attributes of memory. +/// +typedef struct { + /// + /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_MEMORY_ALLOCATION. + /// + EFI_HOB_GENERIC_HEADER Header; + /// + /// An instance of the EFI_HOB_MEMORY_ALLOCATION_HEADER that describes the + /// various attributes of the logical memory allocation. + /// + EFI_HOB_MEMORY_ALLOCATION_HEADER AllocDescriptor; + // + // Additional data pertaining to the "Name" Guid memory + // may go here. + // +} EFI_HOB_MEMORY_ALLOCATION; + +/// +/// The resource type. +/// +typedef UINT32 EFI_RESOURCE_TYPE; + +// +// Value of ResourceType in EFI_HOB_RESOURCE_DESCRIPTOR. +// +#define EFI_RESOURCE_SYSTEM_MEMORY 0x00000000 +#define EFI_RESOURCE_MEMORY_MAPPED_IO 0x00000001 +#define EFI_RESOURCE_IO 0x00000002 +#define EFI_RESOURCE_FIRMWARE_DEVICE 0x00000003 +#define EFI_RESOURCE_MEMORY_MAPPED_IO_PORT 0x00000004 +#define EFI_RESOURCE_MEMORY_RESERVED 0x00000005 +#define EFI_RESOURCE_IO_RESERVED 0x00000006 +#define EFI_RESOURCE_MAX_MEMORY_TYPE 0x00000007 + +/// +/// A type of recount attribute type. +/// +typedef UINT32 EFI_RESOURCE_ATTRIBUTE_TYPE; + +// +// These types can be ORed together as needed. +// +// The first three enumerations describe settings +// +#define EFI_RESOURCE_ATTRIBUTE_PRESENT 0x00000001 +#define EFI_RESOURCE_ATTRIBUTE_INITIALIZED 0x00000002 +#define EFI_RESOURCE_ATTRIBUTE_TESTED 0x00000004 +// +// The rest of the settings describe capabilities +// +#define EFI_RESOURCE_ATTRIBUTE_SINGLE_BIT_ECC 0x00000008 +#define EFI_RESOURCE_ATTRIBUTE_MULTIPLE_BIT_ECC 0x00000010 +#define EFI_RESOURCE_ATTRIBUTE_ECC_RESERVED_1 0x00000020 +#define EFI_RESOURCE_ATTRIBUTE_ECC_RESERVED_2 0x00000040 +#define EFI_RESOURCE_ATTRIBUTE_READ_PROTECTED 0x00000080 +#define EFI_RESOURCE_ATTRIBUTE_WRITE_PROTECTED 0x00000100 +#define EFI_RESOURCE_ATTRIBUTE_EXECUTION_PROTECTED 0x00000200 +#define EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE 0x00000400 +#define EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE 0x00000800 +#define EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE 0x00001000 +#define EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE 0x00002000 +#define EFI_RESOURCE_ATTRIBUTE_16_BIT_IO 0x00004000 +#define EFI_RESOURCE_ATTRIBUTE_32_BIT_IO 0x00008000 +#define EFI_RESOURCE_ATTRIBUTE_64_BIT_IO 0x00010000 +#define EFI_RESOURCE_ATTRIBUTE_UNCACHED_EXPORTED 0x00020000 + +/// +/// Describes the resource properties of all fixed, +/// nonrelocatable resource ranges found on the processor +/// host bus during the HOB producer phase. +/// +typedef struct { + /// + /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_RESOURCE_DESCRIPTOR. + /// + EFI_HOB_GENERIC_HEADER Header; + /// + /// A GUID representing the owner of the resource. This GUID is used by HOB + /// consumer phase components to correlate device ownership of a resource. + /// + EFI_GUID Owner; + /// + /// The resource type enumeration as defined by EFI_RESOURCE_TYPE. + /// + EFI_RESOURCE_TYPE ResourceType; + /// + /// Resource attributes as defined by EFI_RESOURCE_ATTRIBUTE_TYPE. + /// + EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttribute; + /// + /// The physical start address of the resource region. + /// + EFI_PHYSICAL_ADDRESS PhysicalStart; + /// + /// The number of bytes of the resource region. + /// + UINT64 ResourceLength; +} EFI_HOB_RESOURCE_DESCRIPTOR; + +/// +/// Allows writers of executable content in the HOB producer phase to +/// maintain and manage HOBs with specific GUID. +/// +typedef struct { + /// + /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_GUID_EXTENSION. + /// + EFI_HOB_GENERIC_HEADER Header; + /// + /// A GUID that defines the contents of this HOB. + /// + EFI_GUID Name; + // + // Guid specific data goes here + // +} EFI_HOB_GUID_TYPE; + +/// +/// Union of all the possible HOB Types. +/// +typedef union { + EFI_HOB_GENERIC_HEADER *Header; + EFI_HOB_MEMORY_ALLOCATION *MemoryAllocation; + EFI_HOB_RESOURCE_DESCRIPTOR *ResourceDescriptor; + EFI_HOB_GUID_TYPE *Guid; + UINT8 *Raw; +} EFI_PEI_HOB_POINTERS; + + +/** + Returns the type of a HOB. + + This macro returns the HobType field from the HOB header for the + HOB specified by HobStart. + + @param HobStart A pointer to a HOB. + + @return HobType. + +**/ +#define GET_HOB_TYPE(HobStart) \ + ((*(EFI_HOB_GENERIC_HEADER **)&(HobStart))->HobType) + +/** + Returns the length, in bytes, of a HOB. + + This macro returns the HobLength field from the HOB header for the + HOB specified by HobStart. + + @param HobStart A pointer to a HOB. + + @return HobLength. + +**/ +#define GET_HOB_LENGTH(HobStart) \ + ((*(EFI_HOB_GENERIC_HEADER **)&(HobStart))->HobLength) + +/** + Returns a pointer to the next HOB in the HOB list. + + This macro returns a pointer to HOB that follows the + HOB specified by HobStart in the HOB List. + + @param HobStart A pointer to a HOB. + + @return A pointer to the next HOB in the HOB list. + +**/ +#define GET_NEXT_HOB(HobStart) \ + (VOID *)(*(UINT8 **)&(HobStart) + GET_HOB_LENGTH (HobStart)) + +/** + Determines if a HOB is the last HOB in the HOB list. + + This macro determine if the HOB specified by HobStart is the + last HOB in the HOB list. If HobStart is last HOB in the HOB list, + then TRUE is returned. Otherwise, FALSE is returned. + + @param HobStart A pointer to a HOB. + + @retval TRUE The HOB specified by HobStart is the last HOB in the HOB list. + @retval FALSE The HOB specified by HobStart is not the last HOB in the HOB list. + +**/ +#define END_OF_HOB_LIST(HobStart) (GET_HOB_TYPE (HobStart) == (UINT16)EFI_HOB_TYPE_END_OF_HOB_LIST) + +/** + Returns a pointer to data buffer from a HOB of type EFI_HOB_TYPE_GUID_EXTENSION. + + This macro returns a pointer to the data buffer in a HOB specified by HobStart. + HobStart is assumed to be a HOB of type EFI_HOB_TYPE_GUID_EXTENSION. + + @param GuidHob A pointer to a HOB. + + @return A pointer to the data buffer in a HOB. + +**/ +#define GET_GUID_HOB_DATA(HobStart) \ + (VOID *)(*(UINT8 **)&(HobStart) + sizeof (EFI_HOB_GUID_TYPE)) + +/** + Returns the size of the data buffer from a HOB of type EFI_HOB_TYPE_GUID_EXTENSION. + + This macro returns the size, in bytes, of the data buffer in a HOB specified by HobStart. + HobStart is assumed to be a HOB of type EFI_HOB_TYPE_GUID_EXTENSION. + + @param GuidHob A pointer to a HOB. + + @return The size of the data buffer. +**/ +#define GET_GUID_HOB_DATA_SIZE(HobStart) \ + (UINT16)(GET_HOB_LENGTH (HobStart) - sizeof (EFI_HOB_GUID_TYPE)) + +/** + Returns the pointer to the HOB list. + + This function returns the pointer to first HOB in the list. + + If the pointer to the HOB list is NULL, then ASSERT(). + + @return The pointer to the HOB list. + +**/ +VOID * +EFIAPI +GetHobList ( + VOID + ); + +/** + Returns the next instance of a HOB type from the starting HOB. + + This function searches the first instance of a HOB type from the starting HOB pointer. + If there does not exist such HOB type from the starting HOB pointer, it will return NULL. + In contrast with macro GET_NEXT_HOB(), this function does not skip the starting HOB pointer + unconditionally: it returns HobStart back if HobStart itself meets the requirement; + caller is required to use GET_NEXT_HOB() if it wishes to skip current HobStart. + + If HobStart is NULL, then ASSERT(). + + @param Type The HOB type to return. + @param HobStart The starting HOB pointer to search from. + + @return The next instance of a HOB type from the starting HOB. + +**/ +VOID * +EFIAPI +GetNextHob ( + UINT16 Type, + CONST VOID *HobStart + ); + +/** + Returns the first instance of a HOB type among the whole HOB list. + + This function searches the first instance of a HOB type among the whole HOB list. + If there does not exist such HOB type in the HOB list, it will return NULL. + + If the pointer to the HOB list is NULL, then ASSERT(). + + @param Type The HOB type to return. + + @return The next instance of a HOB type from the starting HOB. + +**/ +VOID * +EFIAPI +GetFirstHob ( + UINT16 Type + ); + +/** + Returns the next instance of the matched GUID HOB from the starting HOB. + + This function searches the first instance of a HOB from the starting HOB pointer. + Such HOB should satisfy two conditions: + its HOB type is EFI_HOB_TYPE_GUID_EXTENSION and its GUID Name equals to the input Guid. + If there does not exist such HOB from the starting HOB pointer, it will return NULL. + Caller is required to apply GET_GUID_HOB_DATA () and GET_GUID_HOB_DATA_SIZE () + to extract the data section and its size info respectively. + In contrast with macro GET_NEXT_HOB(), this function does not skip the starting HOB pointer + unconditionally: it returns HobStart back if HobStart itself meets the requirement; + caller is required to use GET_NEXT_HOB() if it wishes to skip current HobStart. + + If Guid is NULL, then ASSERT(). + If HobStart is NULL, then ASSERT(). + + @param Guid The GUID to match with in the HOB list. + @param HobStart A pointer to a Guid. + + @return The next instance of the matched GUID HOB from the starting HOB. + +**/ +VOID * +EFIAPI +GetNextGuidHob ( + CONST EFI_GUID *Guid, + CONST VOID *HobStart + ); + +/** + Returns the first instance of the matched GUID HOB among the whole HOB list. + + This function searches the first instance of a HOB among the whole HOB list. + Such HOB should satisfy two conditions: + its HOB type is EFI_HOB_TYPE_GUID_EXTENSION and its GUID Name equals to the input Guid. + If there does not exist such HOB from the starting HOB pointer, it will return NULL. + Caller is required to apply GET_GUID_HOB_DATA () and GET_GUID_HOB_DATA_SIZE () + to extract the data section and its size info respectively. + + If the pointer to the HOB list is NULL, then ASSERT(). + If Guid is NULL, then ASSERT(). + + @param Guid The GUID to match with in the HOB list. + + @return The first instance of the matched GUID HOB among the whole HOB list. + +**/ +VOID * +EFIAPI +GetFirstGuidHob ( + CONST EFI_GUID *Guid + ); + +BOOLEAN +EFIAPI +CompareGuid ( + CONST EFI_GUID *Guid1, + CONST EFI_GUID *Guid2 + ); + +#endif diff --git a/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspinfoheader.h b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspinfoheader.h new file mode 100755 index 0000000..0f7b3a9 --- /dev/null +++ b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspinfoheader.h @@ -0,0 +1,62 @@ +/** @file + +Copyright (C) 2013, Intel Corporation + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _FSP_INFO_HEADER_H_ +#define _FSP_INFO_HEADER_H_ + +#pragma pack(1) + +typedef struct { + + UINT32 Signature; // Off 0x94 + UINT32 HeaderLength; + UINT8 Reserved1[3]; + UINT8 HeaderRevision; + UINT32 ImageRevision; + + CHAR8 ImageId[8]; // Off 0xA4 + UINT32 ImageSize; + UINT32 ImageBase; + + UINT32 ImageAttribute; // Off 0xB4 + UINT32 CfgRegionOffset; + UINT32 CfgRegionSize; + UINT32 ApiEntryNum; + + UINT32 NemInitEntry; // Off 0xC4 + UINT32 FspInitEntry; + UINT32 NotifyPhaseEntry; + UINT32 Reserved2; + +} FSP_INFO_HEADER; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspplatform.h b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspplatform.h new file mode 100755 index 0000000..4fb193b --- /dev/null +++ b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fspplatform.h @@ -0,0 +1,64 @@ +/** @file + +Copyright (C) 2013, Intel Corporation + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +#ifndef _FSP_PLATFORM_H_ +#define _FSP_PLATFORM_H_ + +#include "fsptypes.h" +#include "fspapi.h" +#include "mem_config.h" + +#pragma pack(1) + +typedef struct { + MEM_CONFIG *MemoryConfig; +} FSP_INIT_RT_PLATFORM_BUFFER; + +typedef struct { + uint8_t HTEnable; + uint8_t TurboEnable; + uint8_t MemoryDownEnable; + uint8_t FastBootEnable; +} PLATFORM_CONFIG; + +typedef struct { + const PLATFORM_CONFIG *PlatformConfig; +} FSP_INIT_RT_CONFIG_BUFFER; + +typedef struct { + FSP_INIT_RT_COMMON_BUFFER Common; + FSP_INIT_RT_CONFIG_BUFFER PlatformConfiguration; + FSP_INIT_RT_PLATFORM_BUFFER Platform; +} FSP_INIT_RT_BUFFER; + +#pragma pack() + +#endif + diff --git a/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fsptypes.h b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fsptypes.h new file mode 100755 index 0000000..8950367 --- /dev/null +++ b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/fsptypes.h @@ -0,0 +1,121 @@ +/** @file + +Copyright (C) 2013, Intel Corporation + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +/** \file fsptypes.h + * + * + */ + +#ifndef __FSP_TYPES_H__ +#define __FSP_TYPES_H__ + +/// +/// 8-byte unsigned value. +/// +typedef unsigned long long UINT64; +/// +/// 8-byte signed value. +/// +typedef long long INT64; +/// +/// 4-byte unsigned value. +/// +typedef unsigned int UINT32; +/// +/// 4-byte signed value. +/// +typedef int INT32; +/// +/// 2-byte unsigned value. +/// +typedef unsigned short UINT16; +/// +/// 2-byte Character. Unless otherwise specified all strings are stored in the +/// UTF-16 encoding format as defined by Unicode 2.1 and ISO/IEC 10646 standards. +/// +typedef unsigned short CHAR16; +/// +/// 2-byte signed value. +/// +typedef short INT16; +/// +/// Logical Boolean. 1-byte value containing 0 for FALSE or a 1 for TRUE. Other +/// values are undefined. +/// +typedef unsigned char BOOLEAN; +/// +/// 1-byte unsigned value. +/// +typedef unsigned char UINT8; +/// +/// 1-byte Character +/// +typedef char CHAR8; +/// +/// 1-byte signed value +/// +typedef char INT8; + +typedef void VOID; + +typedef UINT64 EFI_PHYSICAL_ADDRESS; + +typedef struct { + UINT32 Data1; + UINT16 Data2; + UINT16 Data3; + UINT8 Data4[8]; +} EFI_GUID; + +#define CONST const +#define STATIC static + +#define TRUE ((BOOLEAN)(1==1)) +#define FALSE ((BOOLEAN)(0==1)) + +static inline void DebugDeadLoop(void) { + for (;;); +} + +#define FSPAPI __attribute__((cdecl)) +#define EFIAPI __attribute__((cdecl)) + +#define _ASSERT(Expression) DebugDeadLoop() +#define ASSERT(Expression) \ + do { \ + if (!(Expression)) { \ + _ASSERT (Expression); \ + } \ + } while (FALSE) + +typedef UINT32 FSP_STATUS; +typedef UINT32 EFI_STATUS; + +#endif \ No newline at end of file diff --git a/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/mem_config.h b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/mem_config.h new file mode 100755 index 0000000..8dd693e --- /dev/null +++ b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/mem_config.h @@ -0,0 +1,132 @@ +/** @file + +Copyright (C) 2013, Intel Corporation + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +// +// mem_config.h +// + +#ifndef _MEM_CONFIG_H_ +#define _MEM_CONFIG_H_ + +typedef enum { + fi1067_IVB=0, + fi1333_IVB, + fi1400_IVB, + fi1600_IVB, + fi1800_IVB, + fi1867_IVB, + fi2000_IVB, + fi2133_IVB, + fi2200_IVB, + fi2400_IVB, + fi2600_IVB, + fi2667_IVB, + fi2800_IVB, + fiUnsupport_IVB, +}TFrequencyIndex_IVB; + +#define NUM_IVB_MEM_CLK_FREQUENCIES 13 + +// DDR3 memory SPD data +// +// NOTE: This only includes the SPD bytes that are relevant to the MRC +typedef struct { // BYTE + uint8_t SPDGeneral; // 0 Number of Serial PD Bytes Written / SPD Device Size / CRC Coverage 1, 2 + uint8_t SPDRevision; // 1 SPD Revision + uint8_t DRAMDeviceType; // 2 DRAM Device Type + uint8_t ModuleType; // 3 Module Type + uint8_t SDRAMDensityAndBanks; // 4 SDRAM Density and Banks + uint8_t SDRAMAddressing; // 5 SDRAM Addressing + uint8_t VDD; // 6 Module Nominal Voltage + uint8_t ModuleOrganization; // 7 Module Organization + uint8_t ModuleMemoryBusWidth; // 8 Module Memory Bus Width + uint8_t FineTimebase; // 9 Fine Timebase (FTB) Dividend / Divisor + uint8_t TimebaseDividend; // 10 Medium Timebase (MTB) Dividend + uint8_t TimebaseDivisor; // 11 Medium Timebase (MTB) Divisor + uint8_t SDRAMMinimumCycleTime; // 12 SDRAM Minimum Cycle Time (tCKmin) + uint8_t Reserved0; // 13 Reserved0 + uint8_t CASLatenciesLSB; // 14 CAS Latencies Supported, Least Significant Byte + uint8_t CASLatenciesMSB; // 15 CAS Latencies Supported, Most Significant Byte + uint8_t MinimumCASLatencyTime; // 16 Minimum CAS Latency Time (tAAmin) + uint8_t MinimumWriteRecoveryTime; // 17 Minimum Write Recovery Time (tWRmin) + uint8_t MinimumRASToCASDelayTime; // 18 Minimum RAS# to CAS# Delay Time (tRCDmin) + uint8_t MinimumRowToRowDelayTime; // 19 Minimum Row Active to Row Active Delay Time (tRRDmin) + uint8_t MinimumRowPrechargeDelayTime; // 20 Minimum Row Precharge Delay Time (tRPmin) + uint8_t UpperNibblesFortRASAndtRC; // 21 Upper Nibbles for tRAS and tRC + uint8_t tRASmin; // 22 Minimum Active to Precharge Delay Time (tRASmin), Least Significant Byte + uint8_t tRCmin; // 23 Minimum Active to Active/Refresh Delay Time (tRCmin), Least Significant Byte + uint8_t tRFCminLeastSignificantByte; // 24 Minimum Refresh Recovery Delay Time (tRFCmin), Least Significant Byte + uint8_t tRFCminMostSignificantByte; // 25 Minimum Refresh Recovery Delay Time (tRFCmin), Most Significant Byte + uint8_t tWTRmin; // 26 Minimum Internal Write to Read Command Delay Time (tWTRmin) + uint8_t tRTPmin; // 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin) + uint8_t UpperNibbleFortFAW; // 28 Upper Nibble for tFAW + uint8_t tFAWmin; // 29 Minimum Four Activate Window Delay Time (tFAWmin) + uint8_t SDRAMOptionalFeatures; // 30 SDRAM Optional Features + uint8_t SDRAMThermalAndRefreshOptions; // 31 SDRAMThermalAndRefreshOptions + uint8_t ModuleThermalSensor; // 32 ModuleThermalSensor + uint8_t SDRAMDeviceType; // 33 SDRAM Device Type + int8_t tCKminFine; // 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin) + int8_t tAAminFine; // 35 Fine Offset for Minimum CAS Latency Time (tAAmin) + int8_t tRCDminFine; // 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin) + int8_t tRPminFine; // 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin) + int8_t tRCminFine; // 38 Fine Offset for Minimum Active to Active/Refresh Delay Time (tRCmin) + uint8_t ReferenceRawCardUsed; // 62 Reference Raw Card Used + uint8_t AddressMappingEdgeConnector; // 63 Address Mapping from Edge Connector to DRAM + uint8_t ThermalHeatSpreaderSolution; // 64 ThermalHeatSpreaderSolution + uint8_t ModuleManufacturerIdCodeLsb; // 117 Module Manufacturer ID Code, Least Significant Byte + uint8_t ModuleManufacturerIdCodeMsb; // 118 Module Manufacturer ID Code, Most Significant Byte + uint8_t ModuleManufacturingLocation; // 119 Module Manufacturing Location + uint8_t ModuleManufacturingDateYear; // 120 Module Manufacturing Date Year + uint8_t ModuleManufacturingDateWW; // 121 Module Manufacturing Date creation work week + uint8_t ModuleSerialNumberA; // 122 Module Serial Number A + uint8_t ModuleSerialNumberB; // 123 Module Serial Number B + uint8_t ModuleSerialNumberC; // 124 Module Serial Number C + uint8_t ModuleSerialNumberD; // 125 Module Serial Number D + uint8_t CRCA; // 126 CRC A + uint8_t CRCB; // 127 CRC B +} DDR3_SPD; + +// Configuration for each memory channel/bank +typedef struct { + uint32_t Exists; + DDR3_SPD SpdData; + uint8_t InitClkPiValue[NUM_IVB_MEM_CLK_FREQUENCIES]; +} MEM_BANK_CONFIG; + +// Memory configuration +typedef struct { + MEM_BANK_CONFIG ChannelABank0; + MEM_BANK_CONFIG ChannelABank1; + MEM_BANK_CONFIG ChannelBBank0; + MEM_BANK_CONFIG ChannelBBank1; +} MEM_CONFIG; + +#endif + diff --git a/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/peifsp.h b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/peifsp.h new file mode 100755 index 0000000..1e2948e --- /dev/null +++ b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/include/peifsp.h @@ -0,0 +1,43 @@ +/** @file + +Copyright (C) 2013, Intel Corporation + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +/** \file peifsp.h + * + * + */ +#include <stdint.h> +#include "fsptypes.h" +#include "fspfv.h" +#include "fspffs.h" +#include "fsphob.h" +#include "fspapi.h" +#include "fspplatform.h" +#include "fspinfoheader.h" + diff --git a/src/vendorcode/intel/fsp/ivybridge_bd82x6x/srx/fsphob.c b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/srx/fsphob.c new file mode 100644 index 0000000..4214b3a --- /dev/null +++ b/src/vendorcode/intel/fsp/ivybridge_bd82x6x/srx/fsphob.c @@ -0,0 +1,207 @@ +/** + +Copyright (C) 2013, Intel Corporation + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + +**/ + +/*********************************************************************** + * + * fsphob.c + * + * HOB infrastructure code. + * + **********************************************************************/ +#include <string.h> + +#include "fsptypes.h" +#include "fsphob.h" + +// +// Pointer to the HOB should be initialized with the output of FSP INIT PARAMS +// +extern volatile void *FspHobListPtr; + +// +// Function prototype +// +UINT64 +EFIAPI +ReadUnaligned64 ( + CONST UINT64 *Buffer + ); + +/** + Reads a 64-bit value from memory that may be unaligned. + + This function returns the 64-bit value pointed to by Buffer. The function + guarantees that the read operation does not produce an alignment fault. + + If the Buffer is NULL, then ASSERT(). + + @param Buffer Pointer to a 64-bit value that may be unaligned. + + @return The 64-bit value read from Buffer. + +**/ +UINT64 +EFIAPI +ReadUnaligned64 ( + CONST UINT64 *Buffer + ) +{ + ASSERT (Buffer != NULL); + + return *Buffer; +} + +/** + Compares two GUIDs. + + This function compares Guid1 to Guid2. If the GUIDs are identical then TRUE is returned. + If there are any bit differences in the two GUIDs, then FALSE is returned. + + If Guid1 is NULL, then ASSERT(). + If Guid2 is NULL, then ASSERT(). + + @param Guid1 A pointer to a 128 bit GUID. + @param Guid2 A pointer to a 128 bit GUID. + + @retval TRUE Guid1 and Guid2 are identical. + @retval FALSE Guid1 and Guid2 are not identical. + +**/ +BOOLEAN +EFIAPI +CompareGuid ( + CONST EFI_GUID *Guid1, + CONST EFI_GUID *Guid2 + ) +{ + UINT64 LowPartOfGuid1; + UINT64 LowPartOfGuid2; + UINT64 HighPartOfGuid1; + UINT64 HighPartOfGuid2; + + LowPartOfGuid1 = ReadUnaligned64 ((CONST UINT64*) Guid1); + LowPartOfGuid2 = ReadUnaligned64 ((CONST UINT64*) Guid2); + HighPartOfGuid1 = ReadUnaligned64 ((CONST UINT64*) Guid1 + 1); + HighPartOfGuid2 = ReadUnaligned64 ((CONST UINT64*) Guid2 + 1); + + return (BOOLEAN) (LowPartOfGuid1 == LowPartOfGuid2 && HighPartOfGuid1 == HighPartOfGuid2); +} + +/** + Returns the pointer to the HOB list. +**/ +VOID * +EFIAPI +GetHobList ( + VOID + ) +{ + ASSERT (FspHobListPtr != NULL); + return ((VOID *)FspHobListPtr); +} + +/** + Returns the next instance of a HOB type from the starting HOB. +**/ +VOID * +EFIAPI +GetNextHob ( + UINT16 Type, + CONST VOID *HobStart + ) +{ + EFI_PEI_HOB_POINTERS Hob; + + ASSERT (HobStart != NULL); + + Hob.Raw = (UINT8 *) HobStart; + // + // Parse the HOB list until end of list or matching type is found. + // + while (!END_OF_HOB_LIST (Hob)) { + if (Hob.Header->HobType == Type) { + return Hob.Raw; + } + Hob.Raw = GET_NEXT_HOB (Hob); + } + return NULL; +} + +/** + Returns the first instance of a HOB type among the whole HOB list. +**/ +VOID * +EFIAPI +GetFirstHob ( + UINT16 Type + ) +{ + VOID *HobList; + + HobList = GetHobList (); + return GetNextHob (Type, HobList); +} + +/** + Returns the next instance of the matched GUID HOB from the starting HOB. +**/ +VOID * +EFIAPI +GetNextGuidHob ( + CONST EFI_GUID *Guid, + CONST VOID *HobStart + ) +{ + EFI_PEI_HOB_POINTERS GuidHob; + + GuidHob.Raw = (UINT8 *) HobStart; + while ((GuidHob.Raw = GetNextHob (EFI_HOB_TYPE_GUID_EXTENSION, GuidHob.Raw)) != NULL) { + if (CompareGuid (Guid, &GuidHob.Guid->Name)) { + break; + } + GuidHob.Raw = GET_NEXT_HOB (GuidHob); + } + return GuidHob.Raw; +} + +/** + Returns the first instance of the matched GUID HOB among the whole HOB list. +**/ +VOID * +EFIAPI +GetFirstGuidHob ( + CONST EFI_GUID *Guid + ) +{ + VOID *HobList; + + HobList = GetHobList (); + return GetNextGuidHob (Guid, HobList); +}

1 0

Patch set updated for coreboot: 98adcec Update SMM for FSP systems
by Marc Jones 20 Nov '13

20 Nov '13

Marc Jones (marc.jones(a)se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4019 -gerrit commit 98adcec175ba1bd386f8736f8f19271fd0fb2fa9 Author: Marc Jones <marc.jones(a)se-eng.com> Date: Tue Oct 29 22:20:45 2013 -0600 Update SMM for FSP systems Add the FSP northbridge and southbridge includes. Change-Id: I5c7f395dc033caa8d0bf0313382769595d77f2a5 Signed-off-by: Marc Jones <marc.jones(a)se-eng.com> --- src/cpu/x86/smm/smmhandler_tseg.S | 7 +++++++ src/cpu/x86/smm/smmrelocate.S | 8 ++++++++ 2 files changed, 15 insertions(+) diff --git a/src/cpu/x86/smm/smmhandler_tseg.S b/src/cpu/x86/smm/smmhandler_tseg.S index eb5d63c..0c8643c 100644 --- a/src/cpu/x86/smm/smmhandler_tseg.S +++ b/src/cpu/x86/smm/smmhandler_tseg.S @@ -64,8 +64,15 @@ #include <northbridge/intel/haswell/haswell.h> #define TSEG_BAR (DEFAULT_PCIEXBAR | TSEG) #else +#if CONFIG_NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE || CONFIG_NORTHBRIDGE_INTEL_FSP_IVYBRIDGE +#include <northbridge/intel/fsp_sandybridge/northbridge.h> +#define TSEG_BAR (DEFAULT_PCIEXBAR | TSEG) +#else #error "Northbridge must define TSEG_BAR." #endif +#endif + + /* initially SMM is some sort of real mode. Let gcc know * how to treat the SMM handler stub diff --git a/src/cpu/x86/smm/smmrelocate.S b/src/cpu/x86/smm/smmrelocate.S index 16d4b9f..20efb37 100644 --- a/src/cpu/x86/smm/smmrelocate.S +++ b/src/cpu/x86/smm/smmrelocate.S @@ -37,6 +37,8 @@ #include "../../../southbridge/intel/sch/sch.h" #elif CONFIG_SOUTHBRIDGE_INTEL_BD82X6X || CONFIG_SOUTHBRIDGE_INTEL_C216 #include "../../../southbridge/intel/bd82x6x/pch.h" +#elif CONFIG_SOUTHBRIDGE_INTEL_FSP_BD82X6X +#include "../../../southbridge/intel/fsp_bd82x6x/pch.h" #elif CONFIG_SOUTHBRIDGE_INTEL_I82801IX #include "../../../southbridge/intel/i82801ix/i82801ix.h" #else @@ -49,8 +51,14 @@ #include <northbridge/intel/sandybridge/sandybridge.h> #define TSEG_BAR (DEFAULT_PCIEXBAR | TSEG) #else +#if CONFIG_NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE || CONFIG_NORTHBRIDGE_INTEL_FSP_IVYBRIDGE +#include <northbridge/intel/fsp_sandybridge/northbridge.h> +#define TSEG_BAR (DEFAULT_PCIEXBAR | TSEG) +#else #error "Northbridge must define TSEG_BAR." #endif +#endif + #include <cpu/x86/mtrr.h> #endif /* CONFIG_SMM_TSEG */

1 0

Patch set updated for coreboot: 5617ffe Add the Intel Cougar Canyon 2 CRB FSP mainboard
by Marc Jones 20 Nov '13

20 Nov '13

Marc Jones (marc.jones(a)se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4018 -gerrit commit 5617ffe417eafaae955fa4f15f1fea21d2d475d5 Author: Marc Jones <marc.jones(a)se-eng.com> Date: Tue Oct 29 22:13:38 2013 -0600 Add the Intel Cougar Canyon 2 CRB FSP mainboard Cougar Canyon 2 is a Ivybridge/PantherPoint reference board. This implementation uses the Intel FSP. The FSP does not support s3 at this time. All other features are functional. Change-Id: I26c0b82d7ac295498376ad4c3517a9d6660d1c01 Signed-off-by: Marc Jones <marc.jones(a)se-eng.com> --- src/mainboard/intel/Kconfig | 3 + src/mainboard/intel/cougar_canyon2/Kconfig | 76 +++++ src/mainboard/intel/cougar_canyon2/acpi/ec.asl | 0 .../cougar_canyon2/acpi/hostbridge_pci_irqs.asl | 99 ++++++ .../intel/cougar_canyon2/acpi/mainboard.asl | 28 ++ .../intel/cougar_canyon2/acpi/platform.asl | 86 +++++ .../intel/cougar_canyon2/acpi/superio.asl | 35 ++ src/mainboard/intel/cougar_canyon2/acpi/video.asl | 21 ++ src/mainboard/intel/cougar_canyon2/acpi_tables.c | 262 +++++++++++++++ src/mainboard/intel/cougar_canyon2/cmos.layout | 139 ++++++++ src/mainboard/intel/cougar_canyon2/devicetree.cb | 75 +++++ src/mainboard/intel/cougar_canyon2/dsdt.asl | 51 +++ src/mainboard/intel/cougar_canyon2/fadt.c | 171 ++++++++++ src/mainboard/intel/cougar_canyon2/gpio.h | 308 ++++++++++++++++++ src/mainboard/intel/cougar_canyon2/hda_verb.h | 50 +++ src/mainboard/intel/cougar_canyon2/mainboard.c | 171 ++++++++++ src/mainboard/intel/cougar_canyon2/mainboard_smi.c | 97 ++++++ src/mainboard/intel/cougar_canyon2/romstage.c | 354 +++++++++++++++++++++ src/mainboard/intel/cougar_canyon2/thermal.h | 57 ++++ 19 files changed, 2083 insertions(+) diff --git a/src/mainboard/intel/Kconfig b/src/mainboard/intel/Kconfig index bb15bc1..75142e3 100644 --- a/src/mainboard/intel/Kconfig +++ b/src/mainboard/intel/Kconfig @@ -3,6 +3,8 @@ if VENDOR_INTEL choice prompt "Mainboard model" +config BOARD_INTEL_COUGAR_CANYON2 + bool "Cougar Canyon 2 CRB" config BOARD_INTEL_D810E2CB bool "D810E2CB" config BOARD_INTEL_D945GCLF @@ -26,6 +28,7 @@ config BOARD_INTEL_WTM2 endchoice +source "src/mainboard/intel/cougar_canyon2/Kconfig" source "src/mainboard/intel/d810e2cb/Kconfig" source "src/mainboard/intel/d945gclf/Kconfig" source "src/mainboard/intel/eagleheights/Kconfig" diff --git a/src/mainboard/intel/cougar_canyon2/Kconfig b/src/mainboard/intel/cougar_canyon2/Kconfig new file mode 100644 index 0000000..020fdb2 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/Kconfig @@ -0,0 +1,76 @@ +if BOARD_INTEL_COUGAR_CANYON2 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ARCH_X86 + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_FSP_IVYBRIDGE + select SOUTHBRIDGE_INTEL_FSP_BD82X6X + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_ACPI_RESUME + select MMCONF_SUPPORT + select GFXUMA + select SUPERIO_SMSC_SIO1007 + select ENABLE_VMX + select EARLY_CBMEM_INIT + +config MAINBOARD_DIR + string + default intel/cougar_canyon2 + +config MAINBOARD_PART_NUMBER + string + default "Cougar Canyon 2" + +config MMCONF_BASE_ADDRESS + hex + default 0xf8000000 # set to match FSP + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 16 + +config SIO_PORT + hex + default 0x164e + +config SMBIOS_SYSTEM_ENCLOSURE_TYPE + hex + default 0x09 # This is a mobile platform + +config UDELAY_LAPIC_FIXED_FSB + int + default 100 + +config VGA + bool + default y + +config VIRTUAL_ROM_SIZE + hex + default 0x1000000 + +if HAVE_FSP_BIN + +config VGA_BIOS + bool + default y + +config VGA_BIOS_FILE + string + default "../intel/mainboard/intel/cougar_canyon2/vbios/snm_2170.dat" + +config VGA_BIOS_ID + string + default "8086,0166" + + +endif # HAVE_FSP_BIN + +endif # BOARD_INTEL_COUGAR_CANYON2 diff --git a/src/mainboard/intel/cougar_canyon2/acpi/ec.asl b/src/mainboard/intel/cougar_canyon2/acpi/ec.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/intel/cougar_canyon2/acpi/hostbridge_pci_irqs.asl b/src/mainboard/intel/cougar_canyon2/acpi/hostbridge_pci_irqs.asl new file mode 100644 index 0000000..3595e33 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/acpi/hostbridge_pci_irqs.asl @@ -0,0 +1,99 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + + // XHCI 0:14.0 + Package() { 0x0014ffff, 0, 0, 19 }, + + // Network 0:19.0 + Package() { 0x0019ffff, 0, 0, 20 }, + + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 }, + + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + + /* MEI */ + Package() { 0x0016ffff, 0, 0, 16 }, + Package() { 0x0016ffff, 1, 0, 17 }, + + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 16 }, + Package() { 0x001cffff, 1, 0, 17 }, + Package() { 0x001cffff, 2, 0, 18 }, + Package() { 0x001cffff, 3, 0, 19 }, + + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 23 }, + + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 16 }, + Package() { 0x001fffff, 1, 0, 19 }, + Package() { 0x001fffff, 2, 0, 18 }, + Package() { 0x001fffff, 3, 0, 16 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + + // XHCI 0:14.0 + Package() { 0x0014ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + + // EHCI #2 0:19.0 + Package() { 0x0019ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, + + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, + + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, + + /* Management Engine Interface */ + Package() { 0x0016ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0016ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, + + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, + + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKH, 0 }, + + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/intel/cougar_canyon2/acpi/mainboard.asl b/src/mainboard/intel/cougar_canyon2/acpi/mainboard.asl new file mode 100644 index 0000000..6b15331 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/acpi/mainboard.asl @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) + + // Wake + Name(_PRW, Package(){0x1d, 0x05}) +} diff --git a/src/mainboard/intel/cougar_canyon2/acpi/platform.asl b/src/mainboard/intel/cougar_canyon2/acpi/platform.asl new file mode 100644 index 0000000..78fb9d0 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/acpi/platform.asl @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + // NVS has a flag to determine USB policy in S3 + if (S3U0) { + Store (One, GP47) // Enable USB0 + } Else { + Store (Zero, GP47) // Disable USB0 + } + + // NVS has a flag to determine USB policy in S3 + if (S3U1) { + Store (One, GP56) // Enable USB1 + } Else { + Store (Zero, GP56) // Disable USB1 + } +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} + diff --git a/src/mainboard/intel/cougar_canyon2/acpi/superio.asl b/src/mainboard/intel/cougar_canyon2/acpi/superio.asl new file mode 100644 index 0000000..81fb948 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/acpi/superio.asl @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Values should match those defined in devicetree.cb */ + +#undef SIO_ENABLE_FDC0 // pnp 2e.0: Disable Floppy Controller +#undef SIO_ENABLE_INFR // pnp 2e.a: Disable Consumer IR + +#define SIO_ENABLE_PS2K // pnp 2e.5: Enable PS/2 Keyboard +#define SIO_ENABLE_PS2M // pnp 2e.6: Enable PS/2 Mouse +#define SIO_ENABLE_COM1 // pnp 2e.1: Enable Serial Port 1 +#define SIO_ENABLE_ENVC // pnp 2e.4: Enable Environmental Controller +#define SIO_ENVC_IO0 0x700 // pnp 2e.4: io 0x60 +#define SIO_ENVC_IO1 0x710 // pnp 2e.4: io 0x62 +#define SIO_ENABLE_GPIO // pnp 2e.7: Enable GPIO +#define SIO_GPIO_IO0 0x720 // pnp 2e.7: io 0x60 +#define SIO_GPIO_IO1 0x730 // pnp 2e.7: io 0x60 + +#include "superio/smsc/sio1007/acpi/superio.asl" diff --git a/src/mainboard/intel/cougar_canyon2/acpi/video.asl b/src/mainboard/intel/cougar_canyon2/acpi/video.asl new file mode 100644 index 0000000..2c4cb0b --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/acpi/video.asl @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* There are no mainboard video ACPI features. */ + diff --git a/src/mainboard/intel/cougar_canyon2/acpi_tables.c b/src/mainboard/intel/cougar_canyon2/acpi_tables.c new file mode 100644 index 0000000..211dc2d --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/acpi_tables.c @@ -0,0 +1,262 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> + +extern const unsigned char AmlCode[]; +#if CONFIG_HAVE_ACPI_SLIC +unsigned long acpi_create_slic(unsigned long current); +#endif + +#include "southbridge/intel/fsp_bd82x6x/nvs.h" +#include "thermal.h" + +static global_nvs_t *gnvs_; + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; + gnvs->tmax = MAX_TEMPERATURE; + gnvs->flvl = 5; +} + +static void acpi_create_gnvs(global_nvs_t *gnvs) +{ + gnvs_ = gnvs; + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + gnvs->pcnt = dev_count_cpu(); + + /* Enable USB ports in S3 */ + gnvs->s3u0 = 1; + gnvs->s3u1 = 1; + + /* + * Enable Front USB ports in S5 by default + * to be consistent with back port behavior + */ + gnvs->s5u0 = 1; + gnvs->s5u1 = 1; + + /* CBMEM TOC */ + gnvs->cmem = (u32)get_cbmem_toc(); + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + + acpi_update_thermal_table(gnvs); + +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, + const char *oem_table_id) +{ + generate_cpu_entries(); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +void smm_setup_structures(void *gnvs, void *tcg, void *smi1); + +#define ALIGN_CURRENT current = (ALIGN(current, 16)) +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + int i; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_xsdt_t *xsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_mcfg_t *mcfg; + acpi_fadt_t *fadt; + acpi_facs_t *facs; +#if CONFIG_HAVE_ACPI_SLIC + acpi_header_t *slic; +#endif + acpi_header_t *ssdt; + acpi_header_t *dsdt; + + current = start; + + /* Align ACPI tables to 16byte */ + ALIGN_CURRENT; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + ALIGN_CURRENT; + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + ALIGN_CURRENT; + xsdt = (acpi_xsdt_t *) current; + current += sizeof(acpi_xsdt_t); + ALIGN_CURRENT; + + /* clear all table memory */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, xsdt); + acpi_write_rsdt(rsdt); + acpi_write_xsdt(xsdt); + + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + ALIGN_CURRENT; + acpi_create_facs(facs); + + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); + dsdt = (acpi_header_t *) current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + ALIGN_CURRENT; + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + printk(BIOS_DEBUG, "ACPI: * HPET\n"); + + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + ALIGN_CURRENT; + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + printk(BIOS_DEBUG, "ACPI: * MADT\n"); + + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, madt); + + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, mcfg); + + /* Pack GNVS into the ACPI table area */ + for (i=0; i < dsdt->length; i++) { + if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { + printk(BIOS_DEBUG, "ACPI: Patching up global NVS in " + "DSDT at offset 0x%04x -> 0x%08lx\n", i, current); + *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes + acpi_save_gnvs(current); + break; + } + } + + /* And fill it */ + acpi_create_gnvs((global_nvs_t *)current); + + /* And tell SMI about it */ + smm_setup_structures((void *)current, NULL, NULL); + + current += sizeof(global_nvs_t); + ALIGN_CURRENT; + + /* We patched up the DSDT, so we need to recalculate the checksum */ + dsdt->checksum = 0; + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); + + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, + dsdt->length); + +#if CONFIG_HAVE_ACPI_SLIC + printk(BIOS_DEBUG, "ACPI: * SLIC\n"); + slic = (acpi_header_t *)current; + current += acpi_create_slic(current); + ALIGN_CURRENT; + acpi_add_table(rsdp, slic); +#endif + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "current = %lx\n", current); + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/intel/cougar_canyon2/cmos.layout b/src/mainboard/intel/cougar_canyon2/cmos.layout new file mode 100644 index 0000000..afdd3c6 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/cmos.layout @@ -0,0 +1,139 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv +#544 440 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 + + diff --git a/src/mainboard/intel/cougar_canyon2/devicetree.cb b/src/mainboard/intel/cougar_canyon2/devicetree.cb new file mode 100644 index 0000000..e66574e --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/devicetree.cb @@ -0,0 +1,75 @@ +chip northbridge/intel/fsp_sandybridge + + # Enable DisplayPort 1 Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable DisplayPort 0 Hotplug with 6ms pulse + register "gpu_dp_c_hotplug" = "0x06" + + # Enable DVI Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/fsp_model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + register "c1_battery" = "3" # ACPI(C1) = MWAIT(C3) + register "c2_battery" = "4" # ACPI(C2) = MWAIT(C6) + register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) + + register "c1_acpower" = "3" # ACPI(C1) = MWAIT(C3) + register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C6) + register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + + chip southbridge/intel/fsp_bd82x6x # Intel Series 6 Cougar Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + register "ide_legacy_combined" = "0x0" + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x3f" + + device pci 14.0 on end # XHCI + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 on end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 off end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2 + device pci 1c.2 on end # PCIe Port #3 + device pci 1c.3 on end # PCIe Port #4 + device pci 1c.4 on end # PCIe Port #5 + device pci 1c.5 on end # PCIe Port #6 + device pci 1c.6 on end # PCIe Port #7 + device pci 1c.7 on end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge + # TODO: insert SIO UART and WDT + end + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # SATA Controller 2 + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/intel/cougar_canyon2/dsdt.asl b/src/mainboard/intel/cougar_canyon2/dsdt.asl new file mode 100644 index 0000000..cedb8a8 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/dsdt.asl @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/fsp_bd82x6x/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include <cpu/intel/fsp_model_206ax/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <northbridge/intel/fsp_sandybridge/acpi/sandybridge.asl> + #include <southbridge/intel/fsp_bd82x6x/acpi/pch.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/fsp_bd82x6x/acpi/sleepstates.asl> +} diff --git a/src/mainboard/intel/cougar_canyon2/fadt.c b/src/mainboard/intel/cougar_canyon2/fadt.c new file mode 100644 index 0000000..5191674 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/fadt.c @@ -0,0 +1,171 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), + 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = ACPI_FADT_REV_ACPI_3_0; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (u32) facs; + fadt->dsdt = (u32) dsdt; + fadt->model = 0x00; /* reserved, should be 0 ACPI 3.0 */ + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x00; + fadt->pstate_cnt = 0x00; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; /* 32 bits */ + fadt->pm1_cnt_len = 2; /* 32 bit register, 16 bits used */ + fadt->pm2_cnt_len = 1; /* 8 bits */ + fadt->pm_tmr_len = 4; /* 32 bits */ + fadt->gpe0_blk_len = 16; /* 128 bits */ + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0x00; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 87; + fadt->flush_size = 0; /* set to 0 if WBINVD is 1 in flags */ + fadt->flush_stride = 0; /* set to 0 if WBINVD is 1 in flags */ + fadt->duty_offset = 1; + fadt->duty_width = 0; /* not supported */ + fadt->day_alrm = 0x0D; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + fadt->res2 = 0; /* reserved, MUST be 0 ACPI 3.0 */ + + fadt->flags = ACPI_FADT_WBINVD | + ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | + ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; + fadt->reset_reg.addrl = 0xCF9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->res3 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ + fadt->res4 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ + fadt->res5 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ + + fadt->x_firmware_ctl_l = 0x00; /* set to 0 if firmware_ctrl is used */ + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32)dsdt; + fadt->x_dsdt_h = 0; + + /* PM1 Status & PM1 Enable */ + fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0; + + fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.access_size = 0; + fadt->x_pm1b_evt_blk.addrl = 0; + fadt->x_pm1b_evt_blk.addrh = 0; + + /* PM1 Control Registers */ + fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x04; + fadt->x_pm1a_cnt_blk.addrh = 0; + + fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.access_size = 0; + fadt->x_pm1b_cnt_blk.addrl = 0; + fadt->x_pm1b_cnt_blk.addrh = 0; + + /* PM2 Control Registers */ + fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0; + + /* PM1 Timer Register */ + fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x08; + fadt->x_pm_tmr_blk.addrh = 0; + + /* General-Purpose Event Registers */ + fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_gpe0_blk.bit_width = 128; /* EventStatus + EventEnable */ + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0; + + fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.access_size = 0; + fadt->x_gpe1_blk.addrl = 0; + fadt->x_gpe1_blk.addrh = 0; + + header->checksum = + acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/mainboard/intel/cougar_canyon2/gpio.h b/src/mainboard/intel/cougar_canyon2/gpio.h new file mode 100644 index 0000000..f8f16ca --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/gpio.h @@ -0,0 +1,308 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include "southbridge/intel/fsp_bd82x6x/gpio.h" + +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, /* SINAI */ + .gpio1 = GPIO_MODE_GPIO, /* SMC_SMI */ + .gpio2 = GPIO_MODE_GPIO, /* PIRQE# */ + .gpio3 = GPIO_MODE_GPIO, /* PIRQF# */ + .gpio4 = GPIO_MODE_GPIO, /* PIRQG# */ + .gpio5 = GPIO_MODE_GPIO, /* PIRQH# */ + .gpio6 = GPIO_MODE_GPIO, /* DGPU_HPD_INTR*/ + .gpio7 = GPIO_MODE_GPIO, /* SMC_SCI# */ + .gpio8 = GPIO_MODE_NONE, /* NOT USED */ + .gpio9 = GPIO_MODE_NATIVE, /* USB OC10-11*/ + .gpio10 = GPIO_MODE_NATIVE, /* USB OC12-13 */ + .gpio11 = GPIO_MODE_GPIO, /* SMB_ALERT*/ + .gpio12 = GPIO_MODE_NATIVE, /* LAN DISABLE */ + .gpio13 = GPIO_MODE_NATIVE, /* HDA_DOCK_RST */ + .gpio14 = GPIO_MODE_GPIO, /* SMC_WAKE */ + .gpio15 = GPIO_MODE_GPIO, /* HOST ALERT */ + .gpio16 = GPIO_MODE_NATIVE, /* SATA4GP */ + .gpio17 = GPIO_MODE_GPIO, /* DGPU POWEROK */ + .gpio18 = GPIO_MODE_NATIVE, /* PCIECLKRQ1# */ + .gpio19 = GPIO_MODE_NATIVE, /* BBS0 */ + .gpio20 = GPIO_MODE_NATIVE, /* CIECLKRQ2# */ + .gpio21 = GPIO_MODE_NATIVE, /* SATA0GP */ + .gpio22 = GPIO_MODE_GPIO, /* BIOS Recovery */ + .gpio23 = GPIO_MODE_NATIVE, /* LDRQ1 */ + .gpio24 = GPIO_MODE_NONE, /* HOST ALERT */ + .gpio25 = GPIO_MODE_NATIVE, /* PCIECLKRQ3# */ + .gpio26 = GPIO_MODE_NATIVE, /* PCIECLKRQ4# */ + .gpio27 = GPIO_MODE_GPIO, /* SATA0 PWR EN */ + .gpio28 = GPIO_MODE_GPIO, /* PLL ODVR */ + .gpio29 = GPIO_MODE_GPIO, /* SLP_LAN# */ + .gpio30 = GPIO_MODE_NATIVE, /* SUS_WARN# */ + .gpio31 = GPIO_MODE_NATIVE, /* ACPRESENT */ +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_OUTPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio18 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio30 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_LOW, + .gpio1 = GPIO_LEVEL_HIGH, + .gpio2 = GPIO_LEVEL_HIGH, + .gpio3 = GPIO_LEVEL_HIGH, + .gpio4 = GPIO_LEVEL_LOW, + .gpio5 = GPIO_LEVEL_LOW, + .gpio6 = GPIO_LEVEL_HIGH, + .gpio7 = GPIO_LEVEL_HIGH, + .gpio8 = GPIO_LEVEL_HIGH, + .gpio9 = GPIO_LEVEL_HIGH, + .gpio10 = GPIO_LEVEL_HIGH, + .gpio11 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio13 = GPIO_LEVEL_LOW, + .gpio14 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_HIGH, + .gpio16 = GPIO_LEVEL_LOW, + .gpio17 = GPIO_LEVEL_LOW, + .gpio18 = GPIO_LEVEL_HIGH, + .gpio19 = GPIO_LEVEL_HIGH, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_HIGH, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, + .gpio30 = GPIO_LEVEL_HIGH, + .gpio31 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio3 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio14 = GPIO_INVERT, + .gpio15 = GPIO_INVERT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, /* SIO CLKREQ */ + .gpio33 = GPIO_MODE_NATIVE, /* DOCK ENABLE*/ + .gpio34 = GPIO_MODE_GPIO, /* STP PCI LED */ + .gpio35 = GPIO_MODE_NATIVE, /* SATA POWER EN */ + .gpio36 = GPIO_MODE_NATIVE, /* SATA2 PRESENT DET */ + .gpio37 = GPIO_MODE_NONE, /* NOT USED */ + .gpio38 = GPIO_MODE_GPIO, /* MFG MODE */ + .gpio39 = GPIO_MODE_GPIO, /* GP39 GFX CRB DET */ + .gpio40 = GPIO_MODE_NATIVE, /* USB OC 2-3 */ + .gpio41 = GPIO_MODE_NATIVE, /* USB OC 4-5 */ + .gpio42 = GPIO_MODE_NATIVE, /* USB OC 6-7 */ + .gpio43 = GPIO_MODE_NATIVE, /* USB OC 8-9 */ + .gpio44 = GPIO_MODE_NATIVE, /* PCI SLOT5 CLKREQ5 */ + .gpio45 = GPIO_MODE_NATIVE, /* LAN CLKREQ6 */ + .gpio46 = GPIO_MODE_GPIO, /* PCI SLOT5 CLKREQ5 */ + .gpio47 = GPIO_MODE_NATIVE, /* PEG CLKREQ7 */ + .gpio48 = GPIO_MODE_GPIO, /* SV_ADVANCE_GP48 */ + .gpio49 = GPIO_MODE_GPIO, /* CRIT_TEMP */ + .gpio50 = GPIO_MODE_GPIO, /* DGPU RESET */ + .gpio51 = GPIO_MODE_NONE, /* NOT USED */ + .gpio52 = GPIO_MODE_GPIO, /* DGPU SEL */ + .gpio53 = GPIO_MODE_GPIO, /* DGPU PWM SEL */ + .gpio54 = GPIO_MODE_GPIO, /* DGPU PWM EN */ + .gpio55 = GPIO_MODE_NONE, /* NOT USED */ + .gpio56 = GPIO_MODE_NATIVE, /* NOT USED */ + .gpio57 = GPIO_MODE_NATIVE, /* GP57_SV_DETECT */ + .gpio58 = GPIO_MODE_NATIVE, /* SML1CLK_PCH */ + .gpio59 = GPIO_MODE_NATIVE, /* USB OC 0-1 */ + .gpio60 = GPIO_MODE_GPIO, /* DDR RST CTRL */ + .gpio61 = GPIO_MODE_NATIVE, /* LPC SUSTAT */ + .gpio62 = GPIO_MODE_NATIVE, /* LPC SUSCLK */ + .gpio63 = GPIO_MODE_NATIVE, /* SLP S5*/ + +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_INPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_INPUT, + .gpio42 = GPIO_DIR_INPUT, + .gpio43 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_OUTPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio50 = GPIO_DIR_OUTPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio58 = GPIO_DIR_INPUT, + .gpio59 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_OUTPUT, + .gpio61 = GPIO_DIR_OUTPUT, + .gpio62 = GPIO_DIR_OUTPUT, + .gpio63 = GPIO_DIR_OUTPUT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_LOW, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_HIGH, + .gpio37 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_HIGH, + .gpio39 = GPIO_LEVEL_LOW, + .gpio40 = GPIO_LEVEL_HIGH, + .gpio41 = GPIO_LEVEL_HIGH, + .gpio42 = GPIO_LEVEL_HIGH, + .gpio43 = GPIO_LEVEL_HIGH, + .gpio44 = GPIO_LEVEL_HIGH, + .gpio45 = GPIO_LEVEL_HIGH, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio47 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_HIGH, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_HIGH, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_HIGH, + .gpio55 = GPIO_LEVEL_LOW, + .gpio56 = GPIO_LEVEL_HIGH, + .gpio57 = GPIO_LEVEL_LOW, + .gpio58 = GPIO_LEVEL_HIGH, + .gpio59 = GPIO_LEVEL_HIGH, + .gpio60 = GPIO_LEVEL_HIGH, + .gpio61 = GPIO_LEVEL_HIGH, + .gpio62 = GPIO_LEVEL_HIGH, + .gpio63 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, /* CLK_FLEX0 */ + .gpio65 = GPIO_MODE_NATIVE, /* NOT USED / CLK_FLEX1 */ + .gpio66 = GPIO_MODE_GPIO, /* CLK_FLEX2 */ + .gpio67 = GPIO_MODE_GPIO, /* GPU PRSNT */ + .gpio68 = GPIO_MODE_GPIO, /* SATA PORT2 PWR EN*/ + .gpio69 = GPIO_MODE_GPIO, /* TESTMODE */ + .gpio70 = GPIO_MODE_NATIVE, /* USB3 SLOT 2DET */ + .gpio71 = GPIO_MODE_NATIVE, /* USB3 SLOT 1 DET */ + .gpio72 = GPIO_MODE_NATIVE, /* BATLOW# */ + .gpio73 = GPIO_MODE_NATIVE, /* PCIECLKRQ0#*/ + .gpio74 = GPIO_MODE_NATIVE, /* SML1ALERT# /PCHHOT# */ + .gpio75 = GPIO_MODE_NATIVE, /* SML1DATA */ +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_OUTPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, + .gpio75 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_HIGH, + .gpio65 = GPIO_LEVEL_HIGH, + .gpio66 = GPIO_LEVEL_LOW, + .gpio67 = GPIO_LEVEL_HIGH, + .gpio68 = GPIO_LEVEL_HIGH, + .gpio69 = GPIO_LEVEL_HIGH, + .gpio70 = GPIO_LEVEL_HIGH, + .gpio71 = GPIO_LEVEL_HIGH, + .gpio72 = GPIO_LEVEL_HIGH, + .gpio73 = GPIO_LEVEL_HIGH, + .gpio74 = GPIO_LEVEL_HIGH, + .gpio75 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; +#endif diff --git a/src/mainboard/intel/cougar_canyon2/hda_verb.h b/src/mainboard/intel/cougar_canyon2/hda_verb.h new file mode 100644 index 0000000..e2dd843 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/hda_verb.h @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static const u32 mainboard_cim_verb_data[] = { + /* coreboot specific header */ + 0x80862805, // Codec Vendor / Device ID: Intel CougarPoint HDMI + 0x80860101, // Subsystem ID + 0x00000004, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ + 0x00172001, + 0x00172101, + 0x00172286, + 0x00172380, + + /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ + 0x30571c10, + 0x30571d00, + 0x30571e56, + 0x30571f18, + + /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ + 0x30671c20, + 0x30671d00, + 0x30671e56, + 0x30671f18, + + /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ + 0x30771c30, + 0x30771d00, + 0x30771e56, + 0x30771f18 +}; + diff --git a/src/mainboard/intel/cougar_canyon2/mainboard.c b/src/mainboard/intel/cougar_canyon2/mainboard.c new file mode 100644 index 0000000..60b0b0d --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/mainboard.c @@ -0,0 +1,171 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#if CONFIG_PCI_ROM_RUN || CONFIG_VGA_ROM_RUN +#include <x86emu/x86emu.h> +#endif +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include "hda_verb.h" +#include <southbridge/intel/fsp_bd82x6x/pch.h> + +#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} +#endif + +#if CONFIG_PCI_ROM_RUN || CONFIG_VGA_ROM_RUN +static int int15_handler(void) +{ + int res=0; + + printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", + __func__, X86_AX, X86_BX, X86_CX, X86_DX); + + switch(X86_EAX & 0xffff) { + case 0x5f34: + /* + * Set Panel Fitting Hook: + * bit 2 = Graphics Stretching + * bit 1 = Text Stretching + * bit 0 = Centering (do not set with bit1 or bit2) + * 0 = video bios default + */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x005f; + X86_ECX &= 0xffffff00; + X86_ECX |= 0x01; + res = 1; + break; + case 0x5f35: + /* + * Boot Display Device Hook: + * bit 0 = CRT + * bit 1 = TV (eDP) * + * bit 2 = EFP * + * bit 3 = LFP + * bit 4 = CRT2 + * bit 5 = TV2 (eDP) * + * bit 6 = EFP2 * + * bit 7 = LFP2 + */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x005f; + X86_ECX &= 0xffff0000; + X86_ECX |= 0x0000; + res = 1; + break; + case 0x5f51: + /* + * Hook to select active LFP configuration: + * 00h = No LVDS, VBIOS does not enable LVDS + * 01h = Int-LVDS, LFP driven by integrated LVDS decoder + * 02h = SVDO-LVDS, LFP driven by SVDO decoder + * 03h = eDP, LFP Driven by Int-DisplayPort encoder + */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x005f; + X86_ECX &= 0xffff0000; + X86_ECX |= 0x0003; + res = 1; + break; + case 0x5f70: + switch ((X86_ECX >> 8) & 0xff) { + case 0: + /* Get Mux */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x005f; + X86_ECX &= 0xffff0000; + X86_ECX |= 0x0000; + res = 1; + break; + case 1: + /* Set Mux */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x005f; + X86_ECX &= 0xffff0000; + X86_ECX |= 0x0000; + res = 1; + break; + case 2: + /* Get SG/Non-SG mode */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x005f; + X86_ECX &= 0xffff0000; + X86_ECX |= 0x0000; + res = 1; + break; + default: + /* FIXME: Interrupt was not handled, but return success? */ + printk(BIOS_DEBUG, "Unknown INT15 5f70 function: 0x%02x\n", + ((X86_ECX >> 8) & 0xff)); + return 1; + } + break; + + default: + printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", + X86_EAX & 0xffff); + break; + } + return res; +} +#endif + +/* Audio Setup */ + +extern const u32 * cim_verb_data; +extern u32 cim_verb_data_size; + +static void verb_setup(void) +{ + cim_verb_data = mainboard_cim_verb_data; + cim_verb_data_size = sizeof(mainboard_cim_verb_data); +} + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE + /* Install custom int15 handler for VGA OPROM */ + mainboard_interrupt_handlers(0x15, &int15_handler); +#endif + verb_setup(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; + diff --git a/src/mainboard/intel/cougar_canyon2/mainboard_smi.c b/src/mainboard/intel/cougar_canyon2/mainboard_smi.c new file mode 100644 index 0000000..0116dc6 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/mainboard_smi.c @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/fsp_bd82x6x/nvs.h> +#include <southbridge/intel/fsp_bd82x6x/pch.h> +#include <southbridge/intel/fsp_bd82x6x/me.h> +#include <northbridge/intel/fsp_sandybridge/sandybridge.h> +#include <cpu/intel/fsp_model_206ax/model_206ax.h> + +int mainboard_io_trap_handler(int smif) +{ + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + smm_get_gnvs()->smif = 0; + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + //gnvs->smif = 0; + return 1; +} + +/* + * Change LED_POWER# (SIO GPIO 45) state based on sleep type. + * The IO address is hardcoded as we don't have device path in SMM. + */ +#define SIO_GPIO_BASE_SET4 (0x730 + 3) +#define SIO_GPIO_BLINK_GPIO45 0x25 +void mainboard_smi_sleep(u8 slp_typ) +{ + u8 reg8; + + switch (slp_typ) { + case SLP_TYP_S3: + case SLP_TYP_S4: + break; + + case SLP_TYP_S5: + /* Turn off LED */ + reg8 = inb(SIO_GPIO_BASE_SET4); + reg8 |= (1 << 5); + outb(reg8, SIO_GPIO_BASE_SET4); + break; + } +} + +#define APMC_FINALIZE 0xcb + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 apmc) +{ + switch (apmc) { + case APMC_FINALIZE: + if (mainboard_finalized) { + printk(BIOS_DEBUG, "SMI#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_206ax_finalize_smm(); + + mainboard_finalized = 1; + break; + } + return 0; +} diff --git a/src/mainboard/intel/cougar_canyon2/romstage.c b/src/mainboard/intel/cougar_canyon2/romstage.c new file mode 100644 index 0000000..dff1341 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/romstage.c @@ -0,0 +1,354 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <cbmem.h> +#include <console/console.h> +#include <reset.h> +#include "superio/smsc/sio1007/chip.h" +#include "northbridge/intel/fsp_sandybridge/fsp_util.h" +#include "northbridge/intel/fsp_sandybridge/northbridge.h" +#include "northbridge/intel/fsp_sandybridge/raminit.h" +#include "southbridge/intel/fsp_bd82x6x/pch.h" +#include "southbridge/intel/fsp_bd82x6x/gpio.h" +#include "southbridge/intel/fsp_bd82x6x/me.h" +#include <arch/cpu.h> +#include <cpu/x86/msr.h> +#include "gpio.h" + +static void pch_enable_lpc(void) +{ + device_t dev = PCH_LPC_DEV; + + /* Set COM1/COM2 decode range */ + pci_write_config16(dev, LPC_IO_DEC, 0x0010); + + /* Enable SuperIO + PS/2 Keyboard/Mouse */ + u16 lpc_config = CNF1_LPC_EN | CNF2_LPC_EN | KBC_LPC_EN; + pci_write_config16(dev, LPC_EN, lpc_config); + + /* Map 256 bytes at 0x1600 to the LPC bus. */ + pci_write_config32(dev, LPC_GEN1_DEC, 0xfc1601); + + /* Map a range for the runtime registers to the LPC bus. */ + pci_write_config32(dev, LPC_GEN2_DEC, 0xc0181); + + if (sio1007_enable_uart_at(CONFIG_SIO_PORT)) { + pci_write_config16(dev, LPC_EN, + lpc_config | COMA_LPC_EN); + } +} + +static void setup_sio_gpios(void) +{ + const u16 port = CONFIG_SIO_PORT; + const u16 runtime_port = 0x180; + + /* Turn on configuration mode. */ + outb(0x55, port); + + /* Set the GPIO direction, polarity, and type. */ + sio1007_setreg(port, 0x31, 1 << 0, 1 << 0); + sio1007_setreg(port, 0x32, 0 << 0, 1 << 0); + sio1007_setreg(port, 0x33, 0 << 0, 1 << 0); + + /* Set the base address for the runtime register block. */ + sio1007_setreg(port, 0x30, runtime_port >> 4, 0xff); + sio1007_setreg(port, 0x21, runtime_port >> 12, 0xff); + + /* Turn on address decoding for it. */ + sio1007_setreg(port, 0x3a, 1 << 1, 1 << 1); + + /* + * Enable the RS232 transiver. + * Set the value of GPIO 10 by changing GP1, bit 0. + */ + u8 byte; + byte = inb(runtime_port + 0xc); + byte |= (1 << 0); + outb(byte, runtime_port + 0xc); + + /* Turn off address decoding for it. */ + sio1007_setreg(port, 0x3a, 0 << 1, 1 << 1); + + /* Turn off configuration mode. */ + outb(0xaa, port); +} + +static void rcba_config(void) +{ + u32 reg32; + + /* + * GFX INTA -> PIRQA (MSI) + * D31IP_SIP SATA INTB -> PIRQD + * D31IP_SMIP SMBUS INTC -> PIRQC + * D31IP_SIP SATA2 INTB -> PIRQD + * D31IP_TTIP THRT INTC -> PIRQC + * D29IP_E1P EHCI1 INTA -> PIRQD + * D28IP_P1IP INTA -> PIRQD + * D28IP_P2IP INTB -> PIRQC + * D28IP_P3IP INTC -> PIRQB + * D28IP_P4IP INTD -> PIRQA + * D28IP_P5IP INTA -> PIRQD + * D28IP_P6IP INTB -> PIRQC + * D28IP_P7IP INTC -> PIRQB + * D28IP_P8IP INTD -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQD + * D20IP_XHCI XHCI INTA -> PIRQD (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (INTB << D31IP_SIP2) | + (INTC << D31IP_SMIP) | (INTB << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTD << D28IP_P8IP) | (INTC << D28IP_P7IP) | + (INTB << D28IP_P6IP) | (INTA << D28IP_P5IP) | + (INTD << D28IP_P4IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P2IP) | (INTA << D28IP_P1IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (INTA << D25IP_LIP); + RCBA32(D22IP) = (INTB << D22IP_KTIP) | (INTC << D22IP_IDERIP) | + (INTB << D22IP_MEI2IP) | (INTA << D22IP_MEI1IP); + RCBA32(D20IP) = (INTA << D20IP_XHCIIP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQA, PIRQD, PIRQC, PIRQA); + DIR_ROUTE(D29IR, PIRQH, PIRQD, PIRQA, PIRQC); + DIR_ROUTE(D28IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D27IR, PIRQG, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D26IR, PIRQF, PIRQA, PIRQC, PIRQD); + DIR_ROUTE(D25IR, PIRQE, PIRQF, PIRQG, PIRQH); + DIR_ROUTE(D22IR, PIRQA, PIRQD, PIRQC, PIRQB); + DIR_ROUTE(D20IR, PIRQD, PIRQE, PIRQF, PIRQG); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + + /* Disable unused devices (board specific) */ + reg32 = RCBA32(FD); + reg32 |= PCH_DISABLE_ALWAYS; + RCBA32(FD) = reg32; +} + +void main(FSP_INFO_HEADER *fsp_info_header) +{ +#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) + int boot_mode = 0; +#endif + u32 pm1_cnt; + u16 pm1_sts; + + post_code(0x40); + +#if CONFIG_COLLECT_TIMESTAMPS + tsc_t start_romstage_time; + tsc_t before_initram_time; + + start_romstage_time = rdtsc(); + + /* since this mainboard doesn't use audio, we can stuff the TSC values in there */ + pci_write_config32(PCI_DEV(0, 27, 0), 0x2c, start_romstage_time.lo >> 4 | + start_romstage_time.lo << 28); +#endif + + pch_enable_lpc(); + + /* Enable GPIOs */ + pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); + pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); + setup_pch_gpios(&gpio_map); + setup_sio_gpios(); + + console_init(); + post_code(0x41); + + post_code(0x42); + sandybridge_sb_early_initialization(); + + post_code(0x43); + sandybridge_early_initialization(SANDYBRIDGE_MOBILE); + printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); + + post_code(0x44); + /* Wait for ME to be ready */ + intel_early_me_status(); + intel_early_me_init(); + intel_early_me_uma_size(); + + post_code(0x45); + /* Check PM1_STS[15] to see if we are waking from Sx */ + pm1_sts = inw(DEFAULT_PMBASE + PM1_STS); + + /* Read PM1_CNT[12:10] to determine which Sx state */ + pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT); + post_code(0x46); + if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) { +#if CONFIG_HAVE_ACPI_RESUME + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + boot_mode = 2; + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT); +#else + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); +#endif + } + + post_code(0x48); + +#if CONFIG_COLLECT_TIMESTAMPS + before_initram_time= rdtsc(); + /* since this mainboard doesn't use audio, we can stuff the TSC values in there */ + pci_write_config32(PCI_DEV(0, 27, 0), 0x14, before_initram_time.lo >> 4 | + before_initram_time.lo << 28); + +#endif + + /* + * Call early init to initialize memory and chipset. This function returns + * to the romstage_main_continue function with a pointer to the HOB + * structure. + */ + printk(BIOS_DEBUG, "Starting the Intel FSP (early_init)\n"); + fsp_early_init(fsp_info_header); + die("Uh Oh! fsp_early_init should not return here.\n"); +} + +/******************************************************************************* + * The FSP early_init function returns to this function. + * Memory is setup and the stack is set by the FSP. + ******************************************************************************/ +void romstage_main_continue(EFI_STATUS status, VOID *HobListPtr) { + int cbmem_was_initted; + u32 reg32; + void *cbmem_hob_ptr; + +#if CONFIG_COLLECT_TIMESTAMPS + tsc_t start_romstage_time; + tsc_t base_time; + tsc_t before_initram_time; + tsc_t after_initram_time = rdtsc(); + u32 timebase = pci_read_config32(PCI_DEV(0, 0x1f, 2), 0xd0); + u32 time_romstage_start = pci_read_config32(PCI_DEV(0, 27, 0), 0x2c); + u32 time_before_initram = pci_read_config32(PCI_DEV(0, 27, 0), 0x14); + + base_time.lo = timebase << 4; + base_time.hi = timebase >> 28; + start_romstage_time.lo = time_romstage_start << 4; + start_romstage_time.hi = time_romstage_start >> 28; + before_initram_time.lo = time_before_initram << 4; + before_initram_time.hi = time_before_initram >> 28; +#endif + + /* + * HD AUDIO is not used on this system, so we're using some registers + * in there as temporary registers to save TSC values. This is complete + * now, so disable the audio block. + */ + reg32 = RCBA32(FD); + reg32 |= PCH_DISABLE_HD_AUDIO; + RCBA32(FD) = reg32; + + post_code(0x49); + +#if CONFIG_USBDEBUG + /* FSP reconfigures USB, so reinit it to have debug */ + early_usbdebug_init(); +#endif + + /* For reference print FSP version */ + u32 version = MCHBAR32(0x5034); + printk(BIOS_DEBUG, "FSP Version %d.%d.%d Build %d\n", + version >> 24 , (version >> 16) & 0xff, + (version >> 8) & 0xff, version & 0xff); + printk(BIOS_DEBUG, "FSP Status: 0x%0x\n", (u32)status); + + intel_early_me_init_done(ME_INIT_STATUS_SUCCESS); + + printk(BIOS_SPEW, "FD & FD2 Settings:\n"); + display_fd_settings(); + + report_memory_config(); + + post_code(0x4b); + + early_pch_init(); + post_code(0x4c); + + rcba_config(); + post_code(0x4d); + + quick_ram_check(); + post_code(0x4e); + + cbmem_was_initted = !cbmem_initialize(); + + if(cbmem_was_initted) { + reset_system(); + } + + /* Save the HOB pointer in CBMEM to be used in ramstage. */ + cbmem_hob_ptr = cbmem_add (CBMEM_ID_HOB_POINTER, sizeof(*HobListPtr)); + *(u32*)cbmem_hob_ptr = (u32)HobListPtr; + post_code(0x4f); + +#if CONFIG_COLLECT_TIMESTAMPS + timestamp_init(base_time); + timestamp_add(TS_START_ROMSTAGE, start_romstage_time ); + timestamp_add(TS_BEFORE_INITRAM, before_initram_time ); + timestamp_add(TS_AFTER_INITRAM, after_initram_time); + timestamp_add_now(TS_END_ROMSTAGE); +#endif +#if CONFIG_CONSOLE_CBMEM + /* Keep this the last thing this function does. */ + cbmemc_reinit(); +#endif + +/* + * FSP returns to this function instead of main, so we can't return back + * to the cache_as_ram.inc. Just jump there to finish the ramstage loading. + */ + asm volatile ( + "jmp romstage_main_return\n" + ); +} + +void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer) +{ + /* No overrides needed */ + return; +} + diff --git a/src/mainboard/intel/cougar_canyon2/thermal.h b/src/mainboard/intel/cougar_canyon2/thermal.h new file mode 100644 index 0000000..dd08bef --- /dev/null +++ b/src/mainboard/intel/cougar_canyon2/thermal.h @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MAINBOARD_THERMAL_H +#define MAINBOARD_THERMAL_H + +/* Fan is OFF */ +#define FAN4_THRESHOLD_OFF 0 +#define FAN4_THRESHOLD_ON 0 +#define FAN4_PWM 0x00 + +/* Fan is at LOW speed */ +#define FAN3_THRESHOLD_OFF 48 +#define FAN3_THRESHOLD_ON 55 +#define FAN3_PWM 0x40 + +/* Fan is at MEDIUM speed */ +#define FAN2_THRESHOLD_OFF 52 +#define FAN2_THRESHOLD_ON 64 +#define FAN2_PWM 0x80 + +/* Fan is at HIGH speed */ +#define FAN1_THRESHOLD_OFF 60 +#define FAN1_THRESHOLD_ON 68 +#define FAN1_PWM 0xb0 + +/* Fan is at FULL speed */ +#define FAN0_THRESHOLD_OFF 66 +#define FAN0_THRESHOLD_ON 78 +#define FAN0_PWM 0xff + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 105 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 91 + +/* Tj_max value for calculating PECI CPU temperature */ +#define MAX_TEMPERATURE 100 + +#endif

1 0

Patch set updated for coreboot: b0086bd Add Intel FSP bd82x6x southbridge support
by Marc Jones 20 Nov '13

20 Nov '13

Marc Jones (marc.jones(a)se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4017 -gerrit commit b0086bd3a58c1b86512bd6b75c296741827c1f37 Author: Marc Jones <marc.jones(a)se-eng.com> Date: Tue Oct 29 22:12:32 2013 -0600 Add Intel FSP bd82x6x southbridge support Add support for the bd82x6x using the Intel FSP. The FSP is different enough to warrant its own source files for now. The mrc/system agent chromebook solution does much more southbridge initialization and configuration than the FSP version. It may be combined in the future. Change-Id: Ie493945f3d321d854728d231979a0c172d2b36de Signed-off-by: Marc Jones <marc.jones(a)se-eng.com> --- src/southbridge/intel/Kconfig | 1 + src/southbridge/intel/Makefile.inc | 1 + src/southbridge/intel/fsp_bd82x6x/Kconfig | 90 ++ src/southbridge/intel/fsp_bd82x6x/Makefile.inc | 71 ++ src/southbridge/intel/fsp_bd82x6x/acpi/audio.asl | 36 + .../intel/fsp_bd82x6x/acpi/globalnvs.asl | 287 +++++++ .../intel/fsp_bd82x6x/acpi/irqlinks.asl | 493 +++++++++++ src/southbridge/intel/fsp_bd82x6x/acpi/lpc.asl | 248 ++++++ src/southbridge/intel/fsp_bd82x6x/acpi/pch.asl | 275 ++++++ src/southbridge/intel/fsp_bd82x6x/acpi/pcie.asl | 218 +++++ .../intel/fsp_bd82x6x/acpi/pcie_port.asl | 30 + src/southbridge/intel/fsp_bd82x6x/acpi/sata.asl | 83 ++ .../intel/fsp_bd82x6x/acpi/sleepstates.asl | 32 + src/southbridge/intel/fsp_bd82x6x/acpi/smbus.asl | 242 ++++++ src/southbridge/intel/fsp_bd82x6x/acpi/usb.asl | 91 ++ src/southbridge/intel/fsp_bd82x6x/azalia.c | 375 +++++++++ src/southbridge/intel/fsp_bd82x6x/bootblock.c | 99 +++ src/southbridge/intel/fsp_bd82x6x/chip.h | 92 ++ src/southbridge/intel/fsp_bd82x6x/early_init.c | 190 +++++ src/southbridge/intel/fsp_bd82x6x/early_me.c | 200 +++++ src/southbridge/intel/fsp_bd82x6x/early_smbus.c | 216 +++++ src/southbridge/intel/fsp_bd82x6x/early_spi.c | 114 +++ src/southbridge/intel/fsp_bd82x6x/early_usb.c | 56 ++ src/southbridge/intel/fsp_bd82x6x/elog.c | 114 +++ src/southbridge/intel/fsp_bd82x6x/finalize.c | 64 ++ src/southbridge/intel/fsp_bd82x6x/gpio.c | 135 +++ src/southbridge/intel/fsp_bd82x6x/gpio.h | 194 +++++ src/southbridge/intel/fsp_bd82x6x/lpc.c | 660 +++++++++++++++ src/southbridge/intel/fsp_bd82x6x/me.c | 778 +++++++++++++++++ src/southbridge/intel/fsp_bd82x6x/me.h | 373 ++++++++ src/southbridge/intel/fsp_bd82x6x/me_8.x.c | 933 +++++++++++++++++++++ src/southbridge/intel/fsp_bd82x6x/me_status.c | 213 +++++ src/southbridge/intel/fsp_bd82x6x/nvs.h | 158 ++++ src/southbridge/intel/fsp_bd82x6x/pch.c | 410 +++++++++ src/southbridge/intel/fsp_bd82x6x/pch.h | 585 +++++++++++++ src/southbridge/intel/fsp_bd82x6x/reset.c | 42 + src/southbridge/intel/fsp_bd82x6x/sata.c | 123 +++ src/southbridge/intel/fsp_bd82x6x/smi.c | 416 +++++++++ src/southbridge/intel/fsp_bd82x6x/smihandler.c | 798 ++++++++++++++++++ src/southbridge/intel/fsp_bd82x6x/spi.c | 751 +++++++++++++++++ src/southbridge/intel/fsp_bd82x6x/watchdog.c | 59 ++ 41 files changed, 10346 insertions(+) diff --git a/src/southbridge/intel/Kconfig b/src/southbridge/intel/Kconfig index 788d3e1..91d03e8 100644 --- a/src/southbridge/intel/Kconfig +++ b/src/southbridge/intel/Kconfig @@ -14,3 +14,4 @@ source src/southbridge/intel/pxhd/Kconfig source src/southbridge/intel/sch/Kconfig source src/southbridge/intel/bd82x6x/Kconfig source src/southbridge/intel/lynxpoint/Kconfig +source src/southbridge/intel/fsp_bd82x6x/Kconfig diff --git a/src/southbridge/intel/Makefile.inc b/src/southbridge/intel/Makefile.inc index 8f48caa..1824e03 100644 --- a/src/southbridge/intel/Makefile.inc +++ b/src/southbridge/intel/Makefile.inc @@ -15,3 +15,4 @@ subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_SCH) += sch subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_BD82X6X) += bd82x6x subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_C216) += bd82x6x subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT) += lynxpoint +subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_FSP_BD82X6X) += fsp_bd82x6x \ No newline at end of file diff --git a/src/southbridge/intel/fsp_bd82x6x/Kconfig b/src/southbridge/intel/fsp_bd82x6x/Kconfig new file mode 100644 index 0000000..1a8e80a --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/Kconfig @@ -0,0 +1,90 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 Google Inc. +## Copyright (C) 2013 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config SOUTHBRIDGE_INTEL_FSP_BD82X6X + bool + +if SOUTHBRIDGE_INTEL_FSP_BD82X6X + +config SOUTH_BRIDGE_OPTIONS # dummy + def_bool y + select IOAPIC + select HAVE_HARD_RESET + select HAVE_SMI_HANDLER + select USE_WATCHDOG_ON_BOOT + select PCIEXP_ASPM + select PCIEXP_COMMON_CLOCK + select SPI_FLASH + +config EHCI_BAR + hex + default 0xfef00000 + +config EHCI_DEBUG_OFFSET + hex + default 0xa0 + +config BOOTBLOCK_SOUTHBRIDGE_INIT + string + default "southbridge/intel/fsp_bd82x6x/bootblock.c" + +config SERIRQ_CONTINUOUS_MODE + bool + default n + help + If you set this option to y, the serial IRQ machine will be + operated in continuous mode. + +config HPET_MIN_TICKS + hex + default 0x80 + +if HAVE_FSP_BIN + +config INCLUDE_ME + bool + default n + help + Include the me.bin and descriptor.bin for Intel PCH. + This is usually required for the PCH. + +config ME_PATH + string + depends on INCLUDE_ME + help + The path of the ME and Descriptor files. + +config LOCK_MANAGEMENT_ENGINE + bool "Lock Management Engine section" + default n + depends on INCLUDE_ME + help + The Intel Management Engine supports preventing write accesses + from the host to the Management Engine section in the firmware + descriptor. If the ME section is locked, it can only be overwritten + with an external SPI flash programmer. You will want this if you + want to increase security of your ROM image once you are sure + that the ME firmware is no longer going to change. + + If unsure, say N. + +endif # HAVE_FSP_BIN + +endif diff --git a/src/southbridge/intel/fsp_bd82x6x/Makefile.inc b/src/southbridge/intel/fsp_bd82x6x/Makefile.inc new file mode 100644 index 0000000..dac1241 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/Makefile.inc @@ -0,0 +1,71 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Google Inc. +## Copyright (C) 2013 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# Run an intermediate step when producing coreboot.rom +# that adds additional components to the final firmware +# image outside of CBFS +ifeq ($(CONFIG_INCLUDE_ME),y) +INTERMEDIATE+=bd82x6x_add_me +endif + +ramstage-y += pch.c +ramstage-y += azalia.c +ramstage-y += lpc.c +ramstage-y += sata.c +ramstage-y += me.c +ramstage-y += me_8.x.c +ramstage-y += me_status.c +ramstage-y += reset.c +ramstage-y += watchdog.c + +ramstage-$(CONFIG_ELOG) += elog.c +ramstage-y += spi.c +smm-$(CONFIG_SPI_FLASH_SMM) += spi.c + +ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c +smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c me.c me_8.x.c finalize.c + +romstage-y += early_usb.c early_smbus.c early_me.c me_status.c gpio.c early_init.c +romstage-$(CONFIG_USBDEBUG) += usb_debug.c +ramstage-$(CONFIG_USBDEBUG) += usb_debug.c +smm-$(CONFIG_USBDEBUG) += usb_debug.c +romstage-y += reset.c +romstage-y += early_spi.c + +bd82x6x_add_me: $(obj)/coreboot.pre $(IFDTOOL) + printf " DD Adding Intel Firmware Descriptor\n" + dd if=$(call strip_quotes,$(CONFIG_ME_PATH))/descriptor.bin \ + of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1 + printf " IFDTOOL me.bin -> coreboot.pre\n" + $(objutil)/ifdtool/ifdtool \ + -i ME:$(call strip_quotes,$(CONFIG_ME_PATH))/me.bin \ + $(obj)/coreboot.pre + mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre +ifeq ($(CONFIG_LOCK_MANAGEMENT_ENGINE),y) + printf " IFDTOOL Locking Management Engine\n" + $(objutil)/ifdtool/ifdtool -l $(obj)/coreboot.pre + mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre +else + printf " IFDTOOL Unlocking Management Engine\n" + $(objutil)/ifdtool/ifdtool -u $(obj)/coreboot.pre + mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre +endif + +PHONY += bd82x6x_add_me diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/audio.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/audio.asl new file mode 100644 index 0000000..a455328 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/acpi/audio.asl @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Intel PCH HDA */ + +// Intel High Definition Audio (Azalia) 0:1b.0 + +Device (HDEF) +{ + Name (_ADR, 0x001b0000) + + // Power Resources for Wake + Name (_PRW, Package(){ + 13, // Bit 13 of GPE + 4 // Can wake from S4 state. + }) +} + diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/globalnvs.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/globalnvs.asl new file mode 100644 index 0000000..2fe092d --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/acpi/globalnvs.asl @@ -0,0 +1,287 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Global Variables */ + +Name(\PICM, 0) // IOAPIC/8259 +Name(\DSEN, 1) // Display Output Switching Enable + +/* Global ACPI memory region. This region is used for passing information + * between coreboot (aka "the system bios"), ACPI, and the SMI handler. + * Since we don't know where this will end up in memory at ACPI compile time, + * we have to fix it up in coreboot's ACPI creation phase. + */ + + +OperationRegion (GNVS, SystemMemory, 0xC0DEBABE, 0xf00) +Field (GNVS, ByteAcc, NoLock, Preserve) +{ + /* Miscellaneous */ + Offset (0x00), + OSYS, 16, // 0x00 - Operating System + SMIF, 8, // 0x02 - SMI function + PRM0, 8, // 0x03 - SMI function parameter + PRM1, 8, // 0x04 - SMI function parameter + SCIF, 8, // 0x05 - SCI function + PRM2, 8, // 0x06 - SCI function parameter + PRM3, 8, // 0x07 - SCI function parameter + LCKF, 8, // 0x08 - Global Lock function for EC + PRM4, 8, // 0x09 - Lock function parameter + PRM5, 8, // 0x0a - Lock function parameter + P80D, 32, // 0x0b - Debug port (IO 0x80) value + LIDS, 8, // 0x0f - LID state (open = 1) + PWRS, 8, // 0x10 - Power State (AC = 1) + /* Thermal policy */ + Offset (0x11), + TLVL, 8, // 0x11 - Throttle Level Limit + FLVL, 8, // 0x12 - Current FAN Level + TCRT, 8, // 0x13 - Critical Threshold + TPSV, 8, // 0x14 - Passive Threshold + TMAX, 8, // 0x15 - CPU Tj_max + F0OF, 8, // 0x16 - FAN 0 OFF Threshold + F0ON, 8, // 0x17 - FAN 0 ON Threshold + F0PW, 8, // 0x18 - FAN 0 PWM value + F1OF, 8, // 0x19 - FAN 1 OFF Threshold + F1ON, 8, // 0x1a - FAN 1 ON Threshold + F1PW, 8, // 0x1b - FAN 1 PWM value + F2OF, 8, // 0x1c - FAN 2 OFF Threshold + F2ON, 8, // 0x1d - FAN 2 ON Threshold + F2PW, 8, // 0x1e - FAN 2 PWM value + F3OF, 8, // 0x1f - FAN 3 OFF Threshold + F3ON, 8, // 0x20 - FAN 3 ON Threshold + F3PW, 8, // 0x21 - FAN 3 PWM value + F4OF, 8, // 0x22 - FAN 4 OFF Threshold + F4ON, 8, // 0x23 - FAN 4 ON Threshold + F4PW, 8, // 0x24 - FAN 4 PWM value + TMPS, 8, // 0x25 - Temperature Sensor ID + /* Processor Identification */ + Offset (0x28), + APIC, 8, // 0x28 - APIC Enabled by coreboot + MPEN, 8, // 0x29 - Multi Processor Enable + PCP0, 8, // 0x2a - PDC CPU/CORE 0 + PCP1, 8, // 0x2b - PDC CPU/CORE 1 + PPCM, 8, // 0x2c - Max. PPC state + PCNT, 8, // 0x2d - Processor count + /* Super I/O & CMOS config */ + Offset (0x32), + NATP, 8, // 0x32 - + S5U0, 8, // 0x33 - Enable USB0 in S5 + S5U1, 8, // 0x34 - Enable USB1 in S5 + S3U0, 8, // 0x35 - Enable USB0 in S3 + S3U1, 8, // 0x36 - Enable USB1 in S3 + S33G, 8, // 0x37 - Enable 3G in S3 + CMEM, 32, // 0x38 - CBMEM TOC + /* Integrated Graphics Device */ + Offset (0x3c), + IGDS, 8, // 0x3c - IGD state (primary = 1) + TLST, 8, // 0x3d - Display Toggle List pointer + CADL, 8, // 0x3e - Currently Attached Devices List + PADL, 8, // 0x3f - Previously Attached Devices List + CSTE, 16, // 0x40 - Current display state + NSTE, 16, // 0x42 - Next display state + SSTE, 16, // 0x44 - Set display state + Offset (0x46), + NDID, 8, // 0x46 - Number of Device IDs + DID1, 32, // 0x47 - Device ID 1 + DID2, 32, // 0x4b - Device ID 2 + DID3, 32, // 0x4f - Device ID 3 + DID4, 32, // 0x53 - Device ID 4 + DID5, 32, // 0x57 - Device ID 5 + /* Backlight Control */ + Offset (0x64), + BLCS, 8, // 0x64 - Backlight control possible? + BRTL, 8, // 0x65 - Brightness Level + ODDS, 8, // 0x66 + /* Ambient Light Sensors */ + Offset (0x6e), + ALSE, 8, // 0x6e - ALS enable + ALAF, 8, // 0x6f - Ambient light adjustment factor + LLOW, 8, // 0x70 - LUX Low + LHIH, 8, // 0x71 - LUX High + /* EMA */ + Offset (0x78), + EMAE, 8, // 0x78 - EMA enable + EMAP, 16, // 0x79 - EMA pointer + EMAL, 16, // 0x7b - EMA length + /* MEF */ + Offset (0x82), + MEFE, 8, // 0x82 - MEF enable + /* TPM support */ + Offset (0x8c), + TPMP, 8, // 0x8c - TPM + TPME, 8, // 0x8d - TPM enable + /* SATA */ + Offset (0x96), + GTF0, 56, // 0x96 - GTF task file buffer for port 0 + GTF1, 56, // 0x9d - GTF task file buffer for port 1 + GTF2, 56, // 0xa4 - GTF task file buffer for port 2 + IDEM, 8, // 0xab - IDE mode (compatible / enhanced) + IDET, 8, // 0xac - IDE + /* IGD OpRegion */ + Offset (0xb4), + ASLB, 32, // 0xb4 - IGD OpRegion Base Address + IBTT, 8, // 0xb8 - IGD boot panel device + IPAT, 8, // 0xb9 - IGD panel type cmos option + ITVF, 8, // 0xba - IGD TV format cmos option + ITVM, 8, // 0xbb - IGD TV minor format option + IPSC, 8, // 0xbc - IGD panel scaling + IBLC, 8, // 0xbd - IGD BLC config + IBIA, 8, // 0xbe - IGD BIA config + ISSC, 8, // 0xbf - IGD SSC config + I409, 8, // 0xc0 - IGD 0409 modified settings + I509, 8, // 0xc1 - IGD 0509 modified settings + I609, 8, // 0xc2 - IGD 0609 modified settings + I709, 8, // 0xc3 - IGD 0709 modified settings + IDMM, 8, // 0xc4 - IGD Power conservation feature + IDMS, 8, // 0xc5 - IGD DVMT memory size + IF1E, 8, // 0xc6 - IGD function 1 enable + HVCO, 8, // 0xc7 - IGD HPLL VCO + NXD1, 32, // 0xc8 - IGD _DGS next DID1 + NXD2, 32, // 0xcc - IGD _DGS next DID2 + NXD3, 32, // 0xd0 - IGD _DGS next DID3 + NXD4, 32, // 0xd4 - IGD _DGS next DID4 + NXD5, 32, // 0xd8 - IGD _DGS next DID5 + NXD6, 32, // 0xdc - IGD _DGS next DID6 + NXD7, 32, // 0xe0 - IGD _DGS next DID7 + NXD8, 32, // 0xe4 - IGD _DGS next DID8 + + ISCI, 8, // 0xe8 - IGD SMI/SCI mode (0: SCI) + PAVP, 8, // 0xe9 - IGD PAVP data + Offset (0xeb), + OSCC, 8, // 0xeb - PCIe OSC control + NPCE, 8, // 0xec - native pcie support + PLFL, 8, // 0xed - platform flavor + BREV, 8, // 0xee - board revision + DPBM, 8, // 0xef - digital port b mode + DPCM, 8, // 0xf0 - digital port c mode + DPDM, 8, // 0xf1 - digital port d mode + ALFP, 8, // 0xf2 - active lfp + IMON, 8, // 0xf3 - current graphics turbo imon value + MMIO, 8, // 0xf4 - 64bit mmio support + + /* ChromeOS specific */ + Offset (0x100), + #include <vendorcode/google/chromeos/acpi/gnvs.asl> +} + +/* Set flag to enable USB charging in S3 */ +Method (S3UE) +{ + Store (One, \S3U0) + Store (One, \S3U1) +} + +/* Set flag to disable USB charging in S3 */ +Method (S3UD) +{ + Store (Zero, \S3U0) + Store (Zero, \S3U1) +} + +/* Set flag to enable USB charging in S5 */ +Method (S5UE) +{ + Store (One, \S5U0) + Store (One, \S5U1) +} + +/* Set flag to disable USB charging in S5 */ +Method (S5UD) +{ + Store (Zero, \S5U0) + Store (Zero, \S5U1) +} + +/* Set flag to enable 3G module in S3 */ +Method (S3GE) +{ + Store (One, \S33G) +} + +/* Set flag to disable 3G module in S3 */ +Method (S3GD) +{ + Store (Zero, \S33G) +} + +External (\_TZ.THRM) +External (\_TZ.SKIN) + +Method (TZUP) +{ + /* Update Primary Thermal Zone */ + If (CondRefOf (\_TZ.THRM, Local0)) { + Notify (\_TZ.THRM, 0x81) + } + + /* Update Secondary Thermal Zone */ + If (CondRefOf (\_TZ.SKIN, Local0)) { + Notify (\_TZ.SKIN, 0x81) + } +} + +/* Update Fan 0 thresholds */ +Method (F0UT, 2) +{ + Store (Arg0, \F0OF) + Store (Arg1, \F0ON) + TZUP () +} + +/* Update Fan 1 thresholds */ +Method (F1UT, 2) +{ + Store (Arg0, \F1OF) + Store (Arg1, \F1ON) + TZUP () +} + +/* Update Fan 2 thresholds */ +Method (F2UT, 2) +{ + Store (Arg0, \F2OF) + Store (Arg1, \F2ON) + TZUP () +} + +/* Update Fan 3 thresholds */ +Method (F3UT, 2) +{ + Store (Arg0, \F3OF) + Store (Arg1, \F3ON) + TZUP () +} + +/* Update Fan 4 thresholds */ +Method (F4UT, 2) +{ + Store (Arg0, \F4OF) + Store (Arg1, \F4ON) + TZUP () +} + +/* Update Temperature Sensor ID */ +Method (TMPU, 1) +{ + Store (Arg0, \TMPS) + TZUP () +} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/irqlinks.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/irqlinks.asl new file mode 100644 index 0000000..5fcee45 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/acpi/irqlinks.asl @@ -0,0 +1,493 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (LNKA) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 1) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTA) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLA, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLA, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTA + ShiftLeft(1, And(PRTA, 0x0f), IRQ0) + + Return (RTLA) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTA) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTA, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKB) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 2) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTB) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLB, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLB, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTB + ShiftLeft(1, And(PRTB, 0x0f), IRQ0) + + Return (RTLB) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTB) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTB, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKC) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 3) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTC) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLC, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLC, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTC + ShiftLeft(1, And(PRTC, 0x0f), IRQ0) + + Return (RTLC) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTC) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTC, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKD) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 4) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTD) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLD, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLD, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTD + ShiftLeft(1, And(PRTD, 0x0f), IRQ0) + + Return (RTLD) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTD) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTD, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKE) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 5) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTE) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLE, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLE, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTE + ShiftLeft(1, And(PRTE, 0x0f), IRQ0) + + Return (RTLE) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTE) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTE, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKF) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 6) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTF) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLF, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLF, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTF + ShiftLeft(1, And(PRTF, 0x0f), IRQ0) + + Return (RTLF) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTF) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTF, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKG) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 7) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTG) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLG, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLG, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTG + ShiftLeft(1, And(PRTG, 0x0f), IRQ0) + + Return (RTLG) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTG) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTG, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + +Device (LNKH) +{ + Name (_HID, EISAID("PNP0C0F")) + Name (_UID, 8) + + // Disable method + Method (_DIS, 0, Serialized) + { + Store (0x80, PRTH) + } + + // Possible Resource Settings for this Link + Name (_PRS, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) + { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 } + }) + + // Current Resource Settings for this link + Method (_CRS, 0, Serialized) + { + Name (RTLH, ResourceTemplate() + { + IRQ(Level, ActiveLow, Shared) {} + }) + CreateWordField(RTLH, 1, IRQ0) + + // Clear the WordField + Store (Zero, IRQ0) + + // Set the bit from PRTH + ShiftLeft(1, And(PRTH, 0x0f), IRQ0) + + Return (RTLH) + } + + // Set Resource Setting for this IRQ link + Method (_SRS, 1, Serialized) + { + CreateWordField(Arg0, 1, IRQ0) + + // Which bit is set? + FindSetRightBit(IRQ0, Local0) + + Decrement(Local0) + Store(Local0, PRTH) + } + + // Status + Method (_STA, 0, Serialized) + { + If(And(PRTH, 0x80)) { + Return (0x9) + } Else { + Return (0xb) + } + } +} + diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/lpc.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/lpc.asl new file mode 100644 index 0000000..cc59850 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/acpi/lpc.asl @@ -0,0 +1,248 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// Intel LPC Bus Device - 0:1f.0 + +Device (LPCB) +{ + Name(_ADR, 0x001f0000) + + OperationRegion(LPC0, PCI_Config, 0x00, 0x100) + Field (LPC0, AnyAcc, NoLock, Preserve) + { + Offset (0x40), + PMBS, 16, // PMBASE + Offset (0x60), // Interrupt Routing Registers + PRTA, 8, + PRTB, 8, + PRTC, 8, + PRTD, 8, + Offset (0x68), + PRTE, 8, + PRTF, 8, + PRTG, 8, + PRTH, 8, + + Offset (0x80), // IO Decode Ranges + IOD0, 8, + IOD1, 8, + + Offset (0xb8), // GPIO Routing Control + GR00, 2, + GR01, 2, + GR02, 2, + GR03, 2, + GR04, 2, + GR05, 2, + GR06, 2, + GR07, 2, + GR08, 2, + GR09, 2, + GR10, 2, + GR11, 2, + GR12, 2, + GR13, 2, + GR14, 2, + GR15, 2, + + Offset (0xf0), // RCBA + RCEN, 1, + , 13, + RCBA, 18, + } + + #include "irqlinks.asl" + + #include "acpi/ec.asl" + + Device (DMAC) // DMA Controller + { + Name(_HID, EISAID("PNP0200")) + Name(_CRS, ResourceTemplate() + { + IO (Decode16, 0x00, 0x00, 0x01, 0x20) + IO (Decode16, 0x81, 0x81, 0x01, 0x11) + IO (Decode16, 0x93, 0x93, 0x01, 0x0d) + IO (Decode16, 0xc0, 0xc0, 0x01, 0x20) + DMA (Compatibility, NotBusMaster, Transfer8_16) { 4 } + }) + } + + Device (FWH) // Firmware Hub + { + Name (_HID, EISAID("INT0800")) + Name (_CRS, ResourceTemplate() + { + Memory32Fixed(ReadOnly, 0xff000000, 0x01000000) + }) + } + + Device (HPET) + { + Name (_HID, EISAID("PNP0103")) + Name (_CID, 0x010CD041) + + Name(BUF0, ResourceTemplate() + { + Memory32Fixed(ReadOnly, 0xfed00000, 0x400, FED0) + }) + + Method (_STA, 0) // Device Status + { + If (HPTE) { + // Note: Ancient versions of Windows don't want + // to see the HPET in order to work right + If (LGreaterEqual(OSYS, 2001)) { + Return (0xf) // Enable and show device + } Else { + Return (0xb) // Enable and don't show device + } + } + + Return (0x0) // Not enabled, don't show. + } + + Method (_CRS, 0, Serialized) // Current resources + { + If (HPTE) { + CreateDWordField(BUF0, \_SB.PCI0.LPCB.HPET.FED0._BAS, HPT0) + If (Lequal(HPAS, 1)) { + Store(0xfed01000, HPT0) + } + + If (Lequal(HPAS, 2)) { + Store(0xfed02000, HPT0) + } + + If (Lequal(HPAS, 3)) { + Store(0xfed03000, HPT0) + } + } + + Return (BUF0) + } + } + + Device(PIC) // 8259 Interrupt Controller + { + Name(_HID,EISAID("PNP0000")) + Name(_CRS, ResourceTemplate() + { + IO (Decode16, 0x20, 0x20, 0x01, 0x02) + IO (Decode16, 0x24, 0x24, 0x01, 0x02) + IO (Decode16, 0x28, 0x28, 0x01, 0x02) + IO (Decode16, 0x2c, 0x2c, 0x01, 0x02) + IO (Decode16, 0x30, 0x30, 0x01, 0x02) + IO (Decode16, 0x34, 0x34, 0x01, 0x02) + IO (Decode16, 0x38, 0x38, 0x01, 0x02) + IO (Decode16, 0x3c, 0x3c, 0x01, 0x02) + IO (Decode16, 0xa0, 0xa0, 0x01, 0x02) + IO (Decode16, 0xa4, 0xa4, 0x01, 0x02) + IO (Decode16, 0xa8, 0xa8, 0x01, 0x02) + IO (Decode16, 0xac, 0xac, 0x01, 0x02) + IO (Decode16, 0xb0, 0xb0, 0x01, 0x02) + IO (Decode16, 0xb4, 0xb4, 0x01, 0x02) + IO (Decode16, 0xb8, 0xb8, 0x01, 0x02) + IO (Decode16, 0xbc, 0xbc, 0x01, 0x02) + IO (Decode16, 0x4d0, 0x4d0, 0x01, 0x02) + IRQNoFlags () { 2 } + }) + } + + Device(MATH) // FPU + { + Name (_HID, EISAID("PNP0C04")) + Name (_CRS, ResourceTemplate() + { + IO (Decode16, 0xf0, 0xf0, 0x01, 0x01) + IRQNoFlags() { 13 } + }) + } + + Device(LDRC) // LPC device: Resource consumption + { + Name (_HID, EISAID("PNP0C02")) + Name (_UID, 2) + Name (_CRS, ResourceTemplate() + { + IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO + IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO + IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status + IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post + IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved + IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI + //IO (Decode16, 0x800, 0x800, 0x1, 0x10) // ACPI I/O trap + IO (Decode16, DEFAULT_PMBASE, DEFAULT_PMBASE, 0x1, 0x80) // ICH7-M ACPI + IO (Decode16, DEFAULT_GPIOBASE, DEFAULT_GPIOBASE, 0x1, 0x40) // ICH7-M GPIO + }) + } + + Device (RTC) // Real Time Clock + { + Name (_HID, EISAID("PNP0B00")) + Name (_CRS, ResourceTemplate() + { + IO (Decode16, 0x70, 0x70, 1, 8) +// Disable as Windows doesn't like it, and systems don't seem to use it. +// IRQNoFlags() { 8 } + }) + } + + Device (TIMR) // Intel 8254 timer + { + Name(_HID, EISAID("PNP0100")) + Name(_CRS, ResourceTemplate() + { + IO (Decode16, 0x40, 0x40, 0x01, 0x04) + IO (Decode16, 0x50, 0x50, 0x10, 0x04) + IRQNoFlags() {0} + }) + } + + #include "acpi/superio.asl" + +#ifdef ENABLE_TPM + Device (TPM) // Trusted Platform Module + { + Name(_HID, EISAID("IFX0102")) + Name(_CID, 0x310cd041) + Name(_UID, 1) + + Method(_STA, 0) + { + If (TPMP) { + Return (0xf) + } + Return (0x0) + } + + Name(_CRS, ResourceTemplate() { + IO (Decode16, 0x2e, 0x2e, 0x01, 0x02) + IO (Decode16, 0x6f0, 0x6f0, 0x01, 0x10) + Memory32Fixed (ReadWrite, 0xfed40000, 0x5000) + IRQ (Edge, Activehigh, Exclusive) { 6 } + }) + } +#endif +} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/pch.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/pch.asl new file mode 100644 index 0000000..8632ad8 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/acpi/pch.asl @@ -0,0 +1,275 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Intel Cougar Point PCH support */ + +Scope(\) +{ + // IO-Trap at 0x800. This is the ACPI->SMI communication interface. + + OperationRegion(IO_T, SystemIO, 0x800, 0x10) + Field(IO_T, ByteAcc, NoLock, Preserve) + { + Offset(0x8), + TRP0, 8 // IO-Trap at 0x808 + } + + // PCH Power Management Registers, located at PMBASE (0x1f.0 0x40.l) + OperationRegion(PMIO, SystemIO, DEFAULT_PMBASE, 0x80) + Field(PMIO, ByteAcc, NoLock, Preserve) + { + Offset(0x20), // GPE0_STS + , 16, + GS00, 1, // GPIO00 SCI/Wake Status + GS01, 1, // GPIO01 SCI/Wake Status + GS02, 1, // GPIO02 SCI/Wake Status + GS03, 1, // GPIO03 SCI/Wake Status + GS04, 1, // GPIO04 SCI/Wake Status + GS05, 1, // GPIO05 SCI/Wake Status + GS06, 1, // GPIO06 SCI/Wake Status + GS07, 1, // GPIO07 SCI/Wake Status + GS08, 1, // GPIO08 SCI/Wake Status + GS09, 1, // GPIO09 SCI/Wake Status + GS10, 1, // GPIO10 SCI/Wake Status + GS11, 1, // GPIO11 SCI/Wake Status + GS12, 1, // GPIO12 SCI/Wake Status + GS13, 1, // GPIO13 SCI/Wake Status + GS14, 1, // GPIO14 SCI/Wake Status + GS15, 1, // GPIO15 SCI/Wake Status + Offset(0x28), // GPE0_EN + , 16, + GE00, 1, // GPIO00 SCI/Wake Enable + GE01, 1, // GPIO01 SCI/Wake Enable + GE02, 1, // GPIO02 SCI/Wake Enable + GE03, 1, // GPIO03 SCI/Wake Enable + GE04, 1, // GPIO04 SCI/Wake Enable + GE05, 1, // GPIO05 SCI/Wake Enable + GE06, 1, // GPIO06 SCI/Wake Enable + GE07, 1, // GPIO07 SCI/Wake Enable + GE08, 1, // GPIO08 SCI/Wake Enable + GE09, 1, // GPIO09 SCI/Wake Enable + GE10, 1, // GPIO10 SCI/Wake Enable + GE11, 1, // GPIO11 SCI/Wake Enable + GE12, 1, // GPIO12 SCI/Wake Enable + GE13, 1, // GPIO13 SCI/Wake Enable + GE14, 1, // GPIO14 SCI/Wake Enable + GE15, 1, // GPIO15 SCI/Wake Enable + Offset(0x42), // General Purpose Control + , 1, // skip 1 bit + GPEC, 1, // SWGPE_CTRL + } + + // GPIO IO mapped registers (0x1f.0 reg 0x48.l) + OperationRegion(GPIO, SystemIO, DEFAULT_GPIOBASE, 0x6c) + Field(GPIO, ByteAcc, NoLock, Preserve) + { + Offset(0x00), // GPIO Use Select + GU00, 8, + GU01, 8, + GU02, 8, + GU03, 8, + Offset(0x04), // GPIO IO Select + GIO0, 8, + GIO1, 8, + GIO2, 8, + GIO3, 8, + Offset(0x0c), // GPIO Level + GL00, 1, + GP01, 1, + GP02, 1, + GP0e, 1, + GP04, 1, + GP05, 1, + GP06, 1, + GP07, 1, + GP08, 1, + GP09, 1, + GP10, 1, + GP11, 1, + GP12, 1, + GP13, 1, + GP14, 1, + GP15, 1, + GP16, 1, + GP17, 1, + GP18, 1, + GP19, 1, + GP20, 1, + GP21, 1, + GP22, 1, + GP23, 1, + GP24, 1, + GP25, 1, + GP26, 1, + GP27, 1, + GP28, 1, + GP29, 1, + GP30, 1, + GP31, 1, + Offset(0x18), // GPIO Blink + GB00, 8, + GB01, 8, + GB02, 8, + GB03, 8, + Offset(0x2c), // GPIO Invert + GIV0, 8, + GIV1, 8, + GIV2, 8, + GIV3, 8, + Offset(0x30), // GPIO Use Select 2 + GU04, 8, + GU05, 8, + GU06, 8, + GU07, 8, + Offset(0x34), // GPIO IO Select 2 + GIO4, 8, + GIO5, 8, + GIO6, 8, + GIO7, 8, + Offset(0x38), // GPIO Level 2 + GP32, 1, + GP33, 1, + GP34, 1, + GP35, 1, + GP36, 1, + GP37, 1, + GP38, 1, + GP39, 1, + GP40, 1, + GP41, 1, + GP42, 1, + GP43, 1, + GP44, 1, + GP45, 1, + GP46, 1, + GP47, 1, + GP48, 1, + GP49, 1, + GP50, 1, + GP51, 1, + GP52, 1, + GP53, 1, + GP54, 1, + GP55, 1, + GP56, 1, + GP57, 1, + GP58, 1, + GP59, 1, + GP60, 1, + GP61, 1, + GP62, 1, + GP63, 1, + Offset(0x40), // GPIO Use Select 3 + GU08, 8, + GU09, 4, + Offset(0x44), // GPIO IO Select 3 + GIO8, 8, + GIO9, 4, + Offset(0x48), // GPIO Level 3 + GP64, 1, + GP65, 1, + GP66, 1, + GP67, 1, + GP68, 1, + GP69, 1, + GP70, 1, + GP71, 1, + GP72, 1, + GP73, 1, + GP74, 1, + GP75, 1, + } + + + // ICH7 Root Complex Register Block. Memory Mapped through RCBA) + OperationRegion(RCRB, SystemMemory, DEFAULT_RCBA, 0x4000) + Field(RCRB, DWordAcc, Lock, Preserve) + { + Offset(0x0000), // Backbone + Offset(0x1000), // Chipset + Offset(0x3000), // Legacy Configuration Registers + Offset(0x3404), // High Performance Timer Configuration + HPAS, 2, // Address Select + , 5, + HPTE, 1, // Address Enable + Offset(0x3418), // FD (Function Disable) + , 1, // Reserved + PCID, 1, // PCI bridge disable + SA1D, 1, // SATA1 disable + SMBD, 1, // SMBUS disable + HDAD, 1, // Azalia disable + , 8, // Reserved + EH2D, 1, // EHCI #2 disable + LPBD, 1, // LPC bridge disable + EH1D, 1, // EHCI #1 disable + RP1D, 1, // Root Port 1 disable + RP2D, 1, // Root Port 2 disable + RP3D, 1, // Root Port 3 disable + RP4D, 1, // Root Port 4 disable + RP5D, 1, // Root Port 5 disable + RP6D, 1, // Root Port 6 disable + RP7D, 1, // Root Port 7 disable + RP8D, 1, // Root Port 8 disable + TTRD, 1, // Thermal sensor registers disable + SA2D, 1, // SATA2 disable + Offset(0x3428), // FD2 (Function Disable 2) + BDFD, 1, // Display BDF + ME1D, 1, // ME Interface 1 disable + ME2D, 1, // ME Interface 2 disable + IDRD, 1, // IDE redirect disable + KTCT, 1, // Keyboard Text redirect disable + } +} + +// High Definition Audio (Azalia) 0:1b.0 +#include "audio.asl" + +// PCI Express Ports 0:1c.x +#include "pcie.asl" + +// USB 0:1d.0 and 0:1a.0 +#include "usb.asl" + +// LPC Bridge 0:1f.0 +#include "lpc.asl" + +// SATA 0:1f.2, 0:1f.5 +#include "sata.asl" + +// SMBus 0:1f.3 +#include "smbus.asl" + +Method (_OSC, 4) +{ + /* Check for proper GUID */ + If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) + { + /* Let OS control everything */ + Return (Arg3) + } + Else + { + /* Unrecognized UUID */ + CreateDWordField (Arg3, 0, CDW1) + Or (CDW1, 4, CDW1) + Return (Arg3) + } +} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/pcie.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/pcie.asl new file mode 100644 index 0000000..934cf78 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/acpi/pcie.asl @@ -0,0 +1,218 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Intel 6/7 Series PCH PCIe support */ + +// PCI Express Ports + +Method (IRQM, 1, Serialized) { + + /* Interrupt Map INTA->INTA, INTB->INTB, INTC->INTC, INTD->INTD */ + Name (IQAA, Package() { + Package() { 0x0000ffff, 0, 0, 16 }, + Package() { 0x0000ffff, 1, 0, 17 }, + Package() { 0x0000ffff, 2, 0, 18 }, + Package() { 0x0000ffff, 3, 0, 19 } }) + Name (IQAP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 } }) + + /* Interrupt Map INTA->INTB, INTB->INTC, INTC->INTD, INTD->INTA */ + Name (IQBA, Package() { + Package() { 0x0000ffff, 0, 0, 17 }, + Package() { 0x0000ffff, 1, 0, 18 }, + Package() { 0x0000ffff, 2, 0, 19 }, + Package() { 0x0000ffff, 3, 0, 16 } }) + Name (IQBP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 } }) + + /* Interrupt Map INTA->INTC, INTB->INTD, INTC->INTA, INTD->INTB */ + Name (IQCA, Package() { + Package() { 0x0000ffff, 0, 0, 18 }, + Package() { 0x0000ffff, 1, 0, 19 }, + Package() { 0x0000ffff, 2, 0, 16 }, + Package() { 0x0000ffff, 3, 0, 17 } }) + Name (IQCP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKB, 0 } }) + + /* Interrupt Map INTA->INTD, INTB->INTA, INTC->INTB, INTD->INTC */ + Name (IQDA, Package() { + Package() { 0x0000ffff, 0, 0, 19 }, + Package() { 0x0000ffff, 1, 0, 16 }, + Package() { 0x0000ffff, 2, 0, 17 }, + Package() { 0x0000ffff, 3, 0, 18 } }) + Name (IQDP, Package() { + Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKC, 0 } }) + + Switch (ToInteger (Arg0)) { + /* PCIe Root Port 1 and 5 */ + Case (Package() { 1, 5 }) { + If (PICM) { + Return (IQAA) + } Else { + Return (IQAP) + } + } + + /* PCIe Root Port 2 and 6 */ + Case (Package() { 2, 6 }) { + If (PICM) { + Return (IQBA) + } Else { + Return (IQBP) + } + } + + /* PCIe Root Port 3 and 7 */ + Case (Package() { 3, 7 }) { + If (PICM) { + Return (IQCA) + } Else { + Return (IQCP) + } + } + + /* PCIe Root Port 4 and 8 */ + Case (Package() { 4, 8 }) { + If (PICM) { + Return (IQDA) + } Else { + Return (IQDP) + } + } + + Default { + If (PICM) { + Return (IQDA) + } Else { + Return (IQDP) + } + } + } +} + +Device (RP01) +{ + Name (_ADR, 0x001c0000) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP02) +{ + Name (_ADR, 0x001c0001) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP03) +{ + Name (_ADR, 0x001c0002) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP04) +{ + Name (_ADR, 0x001c0003) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP05) +{ + Name (_ADR, 0x001c0004) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP06) +{ + Name (_ADR, 0x001c0005) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP07) +{ + Name (_ADR, 0x001c0006) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} + +Device (RP08) +{ + Name (_ADR, 0x001c0007) + + #include "pcie_port.asl" + + Method (_PRT) + { + Return (IRQM (RPPN)) + } +} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/pcie_port.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/pcie_port.asl new file mode 100644 index 0000000..fedd9c9 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/acpi/pcie_port.asl @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Included in each PCIe Root Port device */ + +OperationRegion (RPCS, PCI_Config, 0x00, 0xFF) +Field (RPCS, AnyAcc, NoLock, Preserve) +{ + Offset (0x4c), // Link Capabilities + , 24, + RPPN, 8, // Root Port Number +} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/sata.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/sata.asl new file mode 100644 index 0000000..e0c336a --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/acpi/sata.asl @@ -0,0 +1,83 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// Intel SATA Controller 0:1f.2 + +// Note: Some BIOSes put the S-ATA code into an SSDT to make it easily +// pluggable + +Device (SATA) +{ + Name (_ADR, 0x001f0002) + + Device (PRID) + { + Name (_ADR, 0) + + // Get Timing Mode + Method (_GTM) + { + Name(PBUF, Buffer(20) { + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00 }) + + CreateDwordField (PBUF, 0, PIO0) + CreateDwordField (PBUF, 4, DMA0) + CreateDwordField (PBUF, 8, PIO1) + CreateDwordField (PBUF, 12, DMA1) + CreateDwordField (PBUF, 16, FLAG) + + // TODO fill return structure + + Return (PBUF) + } + + // Set Timing Mode + Method (_STM, 3) + { + CreateDwordField (Arg0, 0, PIO0) + CreateDwordField (Arg0, 4, DMA0) + CreateDwordField (Arg0, 8, PIO1) + CreateDwordField (Arg0, 12, DMA1) + CreateDwordField (Arg0, 16, FLAG) + + // TODO: Do the deed + } + + Device (DSK0) + { + Name (_ADR, 0) + // TODO: _RMV ? + // TODO: _GTF ? + } + + Device (DSK1) + { + Name (_ADR, 1) + + // TODO: _RMV ? + // TODO: _GTF ? + } + + } +} + diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/sleepstates.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/sleepstates.asl new file mode 100644 index 0000000..bf67d3c --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/acpi/sleepstates.asl @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Name(\_S0, Package(){0x0,0x0,0x0,0x0}) + +/* + * S1 and S3 sleep states are not supported + * Name(\_S1, Package(){0x1,0x1,0x0,0x0}) + * Name(\_S3, Package(){0x5,0x5,0x0,0x0}) + */ + +Name(\_S4, Package(){0x6,0x6,0x0,0x0}) +Name(\_S5, Package(){0x7,0x7,0x0,0x0}) + diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/smbus.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/smbus.asl new file mode 100644 index 0000000..4409308 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/acpi/smbus.asl @@ -0,0 +1,242 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// Intel SMBus Controller 0:1f.3 + +Device (SBUS) +{ + Name (_ADR, 0x001f0003) + +#ifdef ENABLE_SMBUS_METHODS + OperationRegion (SMBP, PCI_Config, 0x00, 0x100) + Field(SMBP, DWordAcc, NoLock, Preserve) + { + Offset(0x40), + , 2, + I2CE, 1 + } + + OperationRegion (SMBI, SystemIO, SMBUS_IO_BASE, 0x20) + Field (SMBI, ByteAcc, NoLock, Preserve) + { + HSTS, 8, // Host Status + , 8, + HCNT, 8, // Host Control + HCMD, 8, // Host Command + TXSA, 8, // Transmit Slave Address + DAT0, 8, // Host Data 0 + DAT1, 8, // Host Data 1 + HBDB, 8, // Host Block Data Byte + PECK, 8, // Packet Error Check + RXSA, 8, // Receive Slave Address + RXDA, 16, // Receive Slave Data + AUXS, 8, // Auxiliary Status + AUXC, 8, // Auxiliary Control + SLPC, 8, // SMLink Pin Control + SBPC, 8, // SMBus Pin Control + SSTS, 8, // Slave Status + SCMD, 8, // Slave Command + NADR, 8, // Notify Device Address + NDLB, 8, // Notify Data Low Byte + NDLH, 8, // Notify Data High Byte + } + + // Kill all SMBus communication + Method (KILL, 0, Serialized) + { + Or (HCNT, 0x02, HCNT) // Send Kill + Or (HSTS, 0xff, HSTS) // Clean Status + } + + // Check if last operation completed + // return Failure = 0, Success = 1 + Method (CMPL, 0, Serialized) + { + Store (4000, Local0) // Timeout 200ms in 50us steps + While (Local0) { + If (And(HSTS, 0x02)) { // Completion Status? + Return (1) // Operation Completed + } Else { + Stall (50) + Decrement (Local0) + If (LEqual(Local0, 0)) { + KILL() + } + } + } + + Return (0) // Failure + } + + + // Wait for SMBus to become ready + Method (SRDY, 0, Serialized) + { + Store (200, Local0) // Timeout 200ms + While (Local0) { + If (And(HSTS, 0x40)) { // IN_USE? + Sleep(1) // Wait 1ms + Decrement(Local0) // timeout-- + If (LEqual(Local0, 0)) { + Return (1) + } + } Else { + Store (0, Local0) // We're ready + } + } + + Store (4000, Local0) // Timeout 200ms (50us * 4000) + While (Local0) { + If (And (HSTS, 0x01)) { // Host Busy? + Stall(50) // Wait 50us + Decrement(Local0) // timeout-- + If (LEqual(Local0, 0)) { + KILL() + } + } Else { + Return (0) // Success + } + } + + Return (1) // Failure + } + + // SMBus Send Byte + // Arg0: Address + // Arg1: Data + // Return: 1 = Success, 0=Failure + + Method (SSXB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0) + } + + // Send Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Arg0, TXSA) // Write Address + Store (Arg1, HCMD) // Write Data + + Store (0x48, HCNT) // Start + Byte Data Protocol + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (1) // Success + } + + Return (0) + } + + + // SMBus Receive Byte + // Arg0: Address + // Return: 0xffff = Failure, Data (8bit) = Success + + Method (SRXB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0xffff) + } + + // Receive Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Or (Arg0, 1), TXSA) // Write Address + + Store (0x44, HCNT) // Start + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (DAT0) // Success + } + + Return (0xffff) + } + + + // SMBus Write Byte + // Arg0: Address + // Arg1: Command + // Arg2: Data + // Return: 1 = Success, 0=Failure + + Method (SWRB, 3, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0) + } + + // Send Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Arg0, TXSA) // Write Address + Store (Arg1, HCMD) // Write Command + Store (Arg2, DAT0) // Write Data + + Store (0x48, HCNT) // Start + Byte Protocol + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (1) // Success + } + + Return (0) + } + + + // SMBus Read Byte + // Arg0: Address + // Arg1: Command + // Return: 0xffff = Failure, Data (8bit) = Success + + Method (SRDB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0xffff) + } + + // Receive Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Or (Arg0, 1), TXSA) // Write Address + Store (Arg1, HCMD) // Command + + Store (0x48, HCNT) // Start + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (DAT0) // Success + } + + Return (0xffff) + } +#endif +} + diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/usb.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/usb.asl new file mode 100644 index 0000000..cf3e6a0 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/acpi/usb.asl @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Intel Cougar Point USB support */ + +// EHCI Controller 0:1d.0 + +Device (EHC1) +{ + Name(_ADR, 0x001d0000) + + Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake + + // Leave USB ports on for to allow Wake from USB + + Method(_S3D,0) // Highest D State in S3 State + { + Return (2) + } + + Method(_S4D,0) // Highest D State in S4 State + { + Return (2) + } + + Device (HUB7) + { + Name (_ADR, 0x00000000) + + // How many are there? + Device (PRT1) { Name (_ADR, 1) } // USB Port 0 + Device (PRT2) { Name (_ADR, 2) } // USB Port 1 + Device (PRT3) { Name (_ADR, 3) } // USB Port 2 + Device (PRT4) { Name (_ADR, 4) } // USB Port 3 + Device (PRT5) { Name (_ADR, 5) } // USB Port 4 + Device (PRT6) { Name (_ADR, 6) } // USB Port 5 + } +} + +// EHCI #2 Controller 0:1a.0 + +Device (EHC2) +{ + Name(_ADR, 0x001a0000) + + Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake + + // Leave USB ports on for to allow Wake from USB + + Method(_S3D,0) // Highest D State in S3 State + { + Return (2) + } + + Method(_S4D,0) // Highest D State in S4 State + { + Return (2) + } + + Device (HUB7) + { + Name (_ADR, 0x00000000) + + // How many are there? + Device (PRT1) { Name (_ADR, 1) } // USB Port 0 + Device (PRT2) { Name (_ADR, 2) } // USB Port 1 + Device (PRT3) { Name (_ADR, 3) } // USB Port 2 + Device (PRT4) { Name (_ADR, 4) } // USB Port 3 + Device (PRT5) { Name (_ADR, 5) } // USB Port 4 + Device (PRT6) { Name (_ADR, 6) } // USB Port 5 + } +} + diff --git a/src/southbridge/intel/fsp_bd82x6x/azalia.c b/src/southbridge/intel/fsp_bd82x6x/azalia.c new file mode 100644 index 0000000..a257daf --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/azalia.c @@ -0,0 +1,375 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include <delay.h> +#include "pch.h" + +#define HDA_ICII_REG 0x68 +#define HDA_ICII_BUSY (1 << 0) +#define HDA_ICII_VALID (1 << 1) + +typedef struct southbridge_intel_bd82x6x_config config_t; + +static int set_bits(u32 port, u32 mask, u32 val) +{ + u32 reg32; + int count; + + /* Write (val & mask) to port */ + val &= mask; + reg32 = read32(port); + reg32 &= ~mask; + reg32 |= val; + write32(port, reg32); + + /* Wait for readback of register to + * match what was just written to it + */ + count = 50; + do { + /* Wait 1ms based on BKDG wait time */ + mdelay(1); + reg32 = read32(port); + reg32 &= mask; + } while ((reg32 != val) && --count); + + /* Timeout occurred */ + if (!count) + return -1; + return 0; +} + +static int codec_detect(u32 base) +{ + u8 reg8; + + /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ + if (set_bits(base + 0x08, 1, 1) == -1) + goto no_codec; + + /* Write back the value once reset bit is set. */ + write16(base + 0x0, read16(base + 0x0)); + + /* Read in Codec location (BAR + 0xe)[2..0]*/ + reg8 = read8(base + 0xe); + reg8 &= 0x0f; + if (!reg8) + goto no_codec; + + return reg8; + +no_codec: + /* Codec Not found */ + /* Put HDA back in reset (BAR + 0x8) [0] */ + set_bits(base + 0x08, 1, 0); + printk(BIOS_DEBUG, "Azalia: No codec!\n"); + return 0; +} + +const u32 * cim_verb_data = NULL; +u32 cim_verb_data_size = 0; +const u32 * pc_beep_verbs = NULL; +u32 pc_beep_verbs_size = 0; + +static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb) +{ + int idx=0; + + while (idx < (cim_verb_data_size / sizeof(u32))) { + u32 verb_size = 4 * cim_verb_data[idx+2]; // in u32 + if (cim_verb_data[idx] != viddid) { + idx += verb_size + 3; // skip verb + header + continue; + } + *verb = &cim_verb_data[idx+3]; + return verb_size; + } + + /* Not all codecs need to load another verb */ + return 0; +} + +/** + * Wait 50usec for the codec to indicate it is ready + * no response would imply that the codec is non-operative + */ + +static int wait_for_ready(u32 base) +{ + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 50; + + while(timeout--) { + u32 reg32 = read32(base + HDA_ICII_REG); + if (!(reg32 & HDA_ICII_BUSY)) + return 0; + udelay(1); + } + + return -1; +} + +/** + * Wait 50usec for the codec to indicate that it accepted + * the previous command. No response would imply that the code + * is non-operative + */ + +static int wait_for_valid(u32 base) +{ + u32 reg32; + + /* Send the verb to the codec */ + reg32 = read32(base + HDA_ICII_REG); + reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID; + write32(base + HDA_ICII_REG, reg32); + + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 50; + while(timeout--) { + reg32 = read32(base + HDA_ICII_REG); + if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == + HDA_ICII_VALID) + return 0; + udelay(1); + } + + return -1; +} + +static void codec_init(struct device *dev, u32 base, int addr) +{ + u32 reg32; + const u32 *verb; + u32 verb_size; + int i; + + printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr); + + /* 1 */ + if (wait_for_ready(base) == -1) { + printk(BIOS_DEBUG, " codec not ready.\n"); + return; + } + + reg32 = (addr << 28) | 0x000f0000; + write32(base + 0x60, reg32); + + if (wait_for_valid(base) == -1) { + printk(BIOS_DEBUG, " codec not valid.\n"); + return; + } + + reg32 = read32(base + 0x64); + + /* 2 */ + printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32); + verb_size = find_verb(dev, reg32, &verb); + + if (!verb_size) { + printk(BIOS_DEBUG, "Azalia: No verb!\n"); + return; + } + printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size); + + /* 3 */ + for (i = 0; i < verb_size; i++) { + if (wait_for_ready(base) == -1) + return; + + write32(base + 0x60, verb[i]); + + if (wait_for_valid(base) == -1) + return; + } + printk(BIOS_DEBUG, "Azalia: verb loaded.\n"); +} + +static void codecs_init(struct device *dev, u32 base, u32 codec_mask) +{ + int i; + for (i = 3; i >= 0; i--) { + if (codec_mask & (1 << i)) + codec_init(dev, base, i); + } + + for (i = 0; i < pc_beep_verbs_size; i++) { + if (wait_for_ready(base) == -1) + return; + + write32(base + 0x60, pc_beep_verbs[i]); + + if (wait_for_valid(base) == -1) + return; + } +} + +static void azalia_init(struct device *dev) +{ + u32 base; + struct resource *res; + u32 codec_mask; + u8 reg8; + u16 reg16; + u32 reg32; + + /* Find base address */ + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!res) + return; + + // NOTE this will break as soon as the Azalia get's a bar above + // 4G. Is there anything we can do about it? + base = (u32)res->base; + printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base); + + if (RCBA32(0x2030) & (1 << 31)) { + reg32 = pci_mmio_read_config32(dev, 0x120); + reg32 &= 0xf8ffff01; + reg32 |= (1 << 24); // 25 for server + reg32 |= RCBA32(0x2030) & 0xfe; + pci_mmio_write_config32(dev, 0x120, reg32); + + reg16 = pci_mmio_read_config16(dev, 0x78); + reg16 &= ~(1 << 11); + pci_mmio_write_config16(dev, 0x78, reg16); + } else + printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n"); + + reg32 = pci_mmio_read_config32(dev, 0x114); + reg32 &= ~0xfe; + pci_mmio_write_config32(dev, 0x114, reg32); + + // Set VCi enable bit + if (pci_mmio_read_config32(dev, 0x120) & ((1 << 24) | + (1 << 25) | (1 << 26))) { + reg32 = pci_mmio_read_config32(dev, 0x120); + reg32 |= (1 << 31); + pci_mmio_write_config32(dev, 0x120, reg32); + } + + // Enable HDMI codec: + reg32 = pci_read_config32(dev, 0xc4); + reg32 |= (1 << 1); + pci_write_config32(dev, 0xc4, reg32); + + reg8 = pci_read_config8(dev, 0x43); + reg8 |= (1 << 6); + pci_write_config8(dev, 0x43, reg8); + + /* Additional programming steps */ + reg32 = pci_read_config32(dev, 0xc4); + reg32 |= (1 << 13) | (1 << 10); + pci_write_config32(dev, 0xc4, reg32); + + reg32 = pci_read_config32(dev, 0xd0); + reg32 &= ~(1 << 31); + pci_write_config32(dev, 0xd0, reg32); + + /* Additional programming steps */ + reg32 = pci_read_config32(dev, 0xc4); + reg32 |= (1 << 13); + pci_write_config32(dev, 0xc4, reg32); + + reg32 = pci_read_config32(dev, 0xc4); + reg32 |= (1 << 10); + pci_write_config32(dev, 0xc4, reg32); + + reg32 = pci_read_config32(dev, 0xd0); + reg32 &= ~(1 << 31); + pci_write_config32(dev, 0xd0, reg32); + + /* Set Bus Master */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); + + pci_write_config8(dev, 0x3c, 0x0a); // unused? + + /* Codec Initialization Programming Sequence */ + reg32 = read32(base + 0x08); + reg32 |= (1 << 0); + write32(base + 0x08, reg32); + + // + reg8 = pci_read_config8(dev, 0x40); // Audio Control + reg8 |= 1; // Select Azalia mode. This needs to be controlled via devicetree.cb + pci_write_config8(dev, 0x40, reg8); + + reg8 = pci_read_config8(dev, 0x4d); // Docking Status + reg8 &= ~(1 << 7); // Docking not supported + pci_write_config8(dev, 0x4d, reg8); + + codec_mask = codec_detect(base); + + if (codec_mask) { + printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask); + codecs_init(dev, base, codec_mask); + } + + /* Enable dynamic clock gating */ + reg8 = pci_read_config8(dev, 0x43); + reg8 &= ~0x7; + reg8 |= (1 << 2) | (1 << 0); + pci_write_config8(dev, 0x43, reg8); +} + +static void azalia_set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations azalia_pci_ops = { + .set_subsystem = azalia_set_subsystem, +}; + +static struct device_operations azalia_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = azalia_init, + .scan_bus = 0, + .ops_pci = &azalia_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { 0x1c20, 0x1e20, 0 }; + +static const struct pci_driver pch_azalia __pci_driver = { + .ops = &azalia_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; + diff --git a/src/southbridge/intel/fsp_bd82x6x/bootblock.c b/src/southbridge/intel/fsp_bd82x6x/bootblock.c new file mode 100644 index 0000000..7564442 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/bootblock.c @@ -0,0 +1,99 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <cpu/x86/tsc.h> +#include "pch.h" + +static void store_initial_timestamp(void) +{ + /* On Cougar Point / Panther Point, there are two 32bit scratchpad registers: + * D0:F0 0xdc (SKPAD) + * D31:F2 0xd0 (SATA SP) + */ + tsc_t tsc = rdtsc(); + /* + * The scratchpad register at D0F0DC is used by the FSP. The system will + * not boot if the scratchpad register is not 0. Because of this we're + * only storing the low nibble of the high dword of the tsc. Even this + * is probably 0 by the time we get here, so storing 64 bits is overkill.S + */ + pci_write_config32(PCI_DEV(0, 0x1f, 2), 0xd0, tsc.lo >> 4 | tsc.hi << 28); +} + +/* + * Enable Prefetching and Caching. + */ +static void enable_spi_prefetch(void) +{ + u8 reg8; + device_t dev; + + dev = PCI_DEV(0, 0x1f, 0); + + reg8 = pci_read_config8(dev, 0xdc); + reg8 &= ~(3 << 2); + reg8 |= (2 << 2); /* Prefetching and Caching Enabled */ + pci_write_config8(dev, 0xdc, reg8); +} + +static void enable_port80_on_lpc(void) +{ + device_t dev = PCI_DEV(0, 0x1f, 0); + + /* Enable port 80 POST on LPC */ + pci_write_config32(dev, RCBA, DEFAULT_RCBA | 1); + volatile u32 *gcs = (volatile u32 *)(DEFAULT_RCBA + GCS); + u32 reg32 = *gcs; + reg32 = reg32 & ~0x04; + *gcs = reg32; +} + +static void set_spi_speed(void) +{ + u32 fdod; + u8 ssfc; + + /* Observe SPI Descriptor Component Section 0 */ + RCBA32(0x38b0) = 0x1000; + + /* Extract the Write/Erase SPI Frequency from descriptor */ + fdod = RCBA32(0x38b4); + fdod >>= 24; + fdod &= 7; + + /* Set Software Sequence frequency to match */ + ssfc = RCBA8(0x3893); + ssfc &= ~7; + ssfc |= fdod; + RCBA8(0x3893) = ssfc; +} + +static void bootblock_southbridge_init(void) +{ +#if CONFIG_COLLECT_TIMESTAMPS + store_initial_timestamp(); +#endif + enable_spi_prefetch(); + enable_port80_on_lpc(); + set_spi_speed(); + + /* Enable upper 128bytes of CMOS */ + RCBA32(RC) = (1 << 2); +} diff --git a/src/southbridge/intel/fsp_bd82x6x/chip.h b/src/southbridge/intel/fsp_bd82x6x/chip.h new file mode 100644 index 0000000..2415224 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/chip.h @@ -0,0 +1,92 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SOUTHBRIDGE_INTEL_FSP_BD82X6X_CHIP_H +#define SOUTHBRIDGE_INTEL_FSP_BD82X6X_CHIP_H + +struct southbridge_intel_fsp_bd82x6x_config { + /** + * Interrupt Routing configuration + * If bit7 is 1, the interrupt is disabled. + */ + uint8_t pirqa_routing; + uint8_t pirqb_routing; + uint8_t pirqc_routing; + uint8_t pirqd_routing; + uint8_t pirqe_routing; + uint8_t pirqf_routing; + uint8_t pirqg_routing; + uint8_t pirqh_routing; + + /** + * GPI Routing configuration + * + * Only the lower two bits have a meaning: + * 00: No effect + * 01: SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + * 10: SCI (if corresponding GPIO_EN bit is also set) + * 11: reserved + */ + uint8_t gpi0_routing; + uint8_t gpi1_routing; + uint8_t gpi2_routing; + uint8_t gpi3_routing; + uint8_t gpi4_routing; + uint8_t gpi5_routing; + uint8_t gpi6_routing; + uint8_t gpi7_routing; + uint8_t gpi8_routing; + uint8_t gpi9_routing; + uint8_t gpi10_routing; + uint8_t gpi11_routing; + uint8_t gpi12_routing; + uint8_t gpi13_routing; + uint8_t gpi14_routing; + uint8_t gpi15_routing; + + uint32_t gpe0_en; + uint16_t alt_gp_smi_en; + + /* IDE configuration */ + uint32_t ide_legacy_combined; + uint32_t sata_ahci; + uint8_t sata_port_map; + uint32_t sata_port0_gen3_tx; + uint32_t sata_port1_gen3_tx; + + uint32_t gen1_dec; + uint32_t gen2_dec; + uint32_t gen3_dec; + uint32_t gen4_dec; + + /* Enable linear PCIe Root Port function numbers starting at zero */ + uint8_t pcie_port_coalesce; + + /* Override PCIe ASPM */ + uint8_t pcie_aspm_f0; + uint8_t pcie_aspm_f1; + uint8_t pcie_aspm_f2; + uint8_t pcie_aspm_f3; + uint8_t pcie_aspm_f4; + uint8_t pcie_aspm_f5; + uint8_t pcie_aspm_f6; + uint8_t pcie_aspm_f7; +}; + +#endif /* SOUTHBRIDGE_INTEL_BD82X6X_CHIP_H */ diff --git a/src/southbridge/intel/fsp_bd82x6x/early_init.c b/src/southbridge/intel/fsp_bd82x6x/early_init.c new file mode 100644 index 0000000..c89395d --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/early_init.c @@ -0,0 +1,190 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 Google Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <console/console.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <elog.h> +#include "pch.h" + +#define FD_ENTRIES 32 +#define FD2_ENTRIES 5 + +const static char *fd_set_strings[FD_ENTRIES] = { + "", + "PCI Bridge (D30:F0) Disabled\n", + "SATA 1(D31:F2) Disabled\n", + "SMBus Config space Disabled\n", + "High Definition Audio Disabled\n", + "Reserved bit 5 set\n", + "Reserved bit 6 set\n", + "Reserved bit 7 set\n", + "Reserved bit 8 set\n", + "Reserved bit 9 set\n", + "Reserved bit 10 set\n", + "Reserved bit 11 set\n", + "Reserved bit 12 set\n", + "EHCI #2 Disabled\n", + "LPC Bridge Disabled\n", + "EHCI #1 Disabled\n", + "PCIe bridge 1 Disabled\n", + "PCIe bridge 2 Disabled\n", + "PCIe bridge 3 Disabled\n", + "PCIe bridge 4 Disabled\n", + "PCIe bridge 5 Disabled\n", + "PCIe bridge 6 Disabled\n", + "PCIe bridge 7 Disabled\n", + "PCIe bridge 8 Disabled\n", + "Thermal Sensor (D31:F6) Registers Disabled\n", + "SATA 2 (D31:F5) Disabled\n", + "Reserved bit 26 set\n", + "Reserved bit 27 set\n", + "Reserved bit 28 set\n", + "Reserved bit 29 set\n", + "Reserved bit 30 set\n", + "Reserved bit 31 set\n", +}; + +const static char *fd_notset_strings[FD_ENTRIES] = { + "ERROR: Required field NOT programmed\n", + "PCI Bridge (D30:F0) enabled\n", + "SATA 1(D31:F2) enabled\n", + "SMBus Config space enabled\n", + "High Definition Audio enabled\n", + "", + "", + "", + "", + "", + "", + "", + "", + "EHCI #2 Enabled\n", + "LPC Bridge Enabled\n", + "EHCI #1 Enabled\n", + "PCIe bridge 1 Enabled\n", + "PCIe bridge 2 Enabled\n", + "PCIe bridge 3 Enabled\n", + "PCIe bridge 4 Enabled\n", + "PCIe bridge 5 Enabled\n", + "PCIe bridge 6 Enabled\n", + "PCIe bridge 7 Enabled\n", + "PCIe bridge 8 Enabled\n", + "Thermal Sensor (D31:F6) Registers Enabled\n", + "SATA 2 (D31:F5) Enabled\n", + "", + "", + "", + "", + "", + "", +}; + +const static char *fd2_set_strings[FD2_ENTRIES] = { + "Display BDF Enabled\n", + "MEI #1 (D22:F0) Disabled\n", + "MEI #2 (D22:F1) Disabled\n", + "IDE-R (D22:F2) Disabled\n", + "KT (D22:F3) Disabled\n" +}; + +const static char *fd2_notset_strings[FD2_ENTRIES] = { + "Display BDF Disabled\n", + "MEI #1 (D22:F0) Enabled\n", + "MEI #2 (D22:F1) Enabled\n", + "IDE-R (D22:F2) Enabled\n", + "KT (D22:F3) Enabled\n" +}; + +void display_fd_settings(void) +{ + u32 reg32; + int i; + + reg32 = RCBA32(FD); + for (i = 0; i < FD_ENTRIES; i++) { + if (reg32 & (1 << i)) { + printk(BIOS_SPEW, "%s", fd_set_strings[i]); + } else { + printk(BIOS_SPEW, "%s", fd_notset_strings[i]); + } + } + + reg32 = RCBA32(FD2); + for (i = 0; i < FD2_ENTRIES; i++) { + if (reg32 & (1 << i)) { + printk(BIOS_SPEW, "%s", fd2_set_strings[i]); + } else { + printk(BIOS_SPEW, "%s", fd2_notset_strings[i]); + } + } +} + +static void sandybridge_setup_bars(void) +{ + /* Setting up Southbridge. */ + printk(BIOS_DEBUG, "Setting up static southbridge registers..."); + pci_write_config32(PCI_DEV(0, 0x1f, 0), RCBA, DEFAULT_RCBA | 1); + + pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE, DEFAULT_PMBASE | 1); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x44 /* ACPI_CNTL */ , 0x80); /* Enable ACPI BAR */ + + printk(BIOS_DEBUG, " done.\n"); + + printk(BIOS_DEBUG, "Disabling Watchdog reboot..."); + RCBA32(GCS) = RCBA32(GCS) | (1 << 5); /* No reset */ + outw((1 << 11), DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */ + printk(BIOS_DEBUG, " done.\n"); + +#if CONFIG_ELOG_BOOT_COUNT + /* Increment Boot Counter for non-S3 resume */ + if ((inw(DEFAULT_PMBASE + PM1_STS) & WAK_STS) && + ((inl(DEFAULT_PMBASE + PM1_CNT) >> 10) & 7) != SLP_TYP_S3) + boot_count_increment(); +#endif + + printk(BIOS_DEBUG, " done.\n"); + +#if CONFIG_ELOG_BOOT_COUNT + /* Increment Boot Counter except when resuming from S3 */ + if ((inw(DEFAULT_PMBASE + PM1_STS) & WAK_STS) && + ((inl(DEFAULT_PMBASE + PM1_CNT) >> 10) & 7) == SLP_TYP_S3) + return; + boot_count_increment(); +#endif +} + +void sandybridge_sb_early_initialization(void) +{ + /* Setup all BARs required for early PCIe and raminit */ + sandybridge_setup_bars(); +} + +void early_pch_init(void) +{ + u8 reg8; + + // reset rtc power status + reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4); + reg8 &= ~(1 << 2); + pci_write_config8(PCH_LPC_DEV, 0xa4, reg8); +} diff --git a/src/southbridge/intel/fsp_bd82x6x/early_me.c b/src/southbridge/intel/fsp_bd82x6x/early_me.c new file mode 100644 index 0000000..670e1ce --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/early_me.c @@ -0,0 +1,200 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/hlt.h> +#include <arch/io.h> +#include <console/console.h> +#include <delay.h> +#include <device/pci_ids.h> +#include <string.h> +#include "me.h" +#include "pch.h" + +static const char *me_ack_values[] = { + [ME_HFS_ACK_NO_DID] = "No DID Ack received", + [ME_HFS_ACK_RESET] = "Non-power cycle reset", + [ME_HFS_ACK_PWR_CYCLE] = "Power cycle reset", + [ME_HFS_ACK_S3] = "Go to S3", + [ME_HFS_ACK_S4] = "Go to S4", + [ME_HFS_ACK_S5] = "Go to S5", + [ME_HFS_ACK_GBL_RESET] = "Global Reset", + [ME_HFS_ACK_CONTINUE] = "Continue to boot" +}; + +static inline void pci_read_dword_ptr(void *ptr, int offset) +{ + u32 dword = pci_read_config32(PCH_ME_DEV, offset); + memcpy(ptr, &dword, sizeof(dword)); +} + +static inline void pci_write_dword_ptr(void *ptr, int offset) +{ + u32 dword = 0; + memcpy(&dword, ptr, sizeof(dword)); + pci_write_config32(PCH_ME_DEV, offset, dword); +} + +void intel_early_me_status(void) +{ + struct me_hfs hfs; + struct me_gmes gmes; + + pci_read_dword_ptr(&hfs, PCI_ME_HFS); + pci_read_dword_ptr(&gmes, PCI_ME_GMES); + + intel_me_status(&hfs, &gmes); +} + +int intel_early_me_init(void) +{ + int count; + struct me_uma uma; + struct me_hfs hfs; + + printk(BIOS_INFO, "Intel ME early init\n"); + + /* Wait for ME UMA SIZE VALID bit to be set */ + for (count = ME_RETRY; count > 0; --count) { + pci_read_dword_ptr(&uma, PCI_ME_UMA); + if (uma.valid) + break; + udelay(ME_DELAY); + } + if (!count) { + printk(BIOS_ERR, "ERROR: ME is not ready!\n"); + return -1; + } + + /* Check for valid firmware */ + pci_read_dword_ptr(&hfs, PCI_ME_HFS); + if (hfs.fpt_bad) { + printk(BIOS_WARNING, "WARNING: ME has bad firmware\n"); + return -1; + } + + printk(BIOS_INFO, "Intel ME firmware is ready\n"); + return 0; +} + +int intel_early_me_uma_size(void) +{ + struct me_uma uma; + + pci_read_dword_ptr(&uma, PCI_ME_UMA); + if (uma.valid) { + printk(BIOS_DEBUG, "ME: Requested %uMB UMA\n", uma.size); + return uma.size; + } + + printk(BIOS_DEBUG, "ME: Invalid UMA size\n"); + return 0; +} + +static inline void set_global_reset(int enable) +{ + u32 etr3 = pci_read_config32(PCH_LPC_DEV, ETR3); + + /* Clear CF9 Without Resume Well Reset Enable */ + etr3 &= ~ETR3_CWORWRE; + + /* CF9GR indicates a Global Reset */ + if (enable) + etr3 |= ETR3_CF9GR; + else + etr3 &= ~ETR3_CF9GR; + + pci_write_config32(PCH_LPC_DEV, ETR3, etr3); +} + +int intel_early_me_init_done(u8 status) +{ + u8 reset; + int count; + u32 mebase_l, mebase_h; + struct me_hfs hfs; + struct me_did did = { + .init_done = ME_INIT_DONE, + .status = status + }; + + /* MEBASE from MESEG_BASE[35:20] */ + mebase_l = pci_read_config32(PCI_CPU_DEVICE, PCI_CPU_MEBASE_L); + mebase_h = pci_read_config32(PCI_CPU_DEVICE, PCI_CPU_MEBASE_H) & 0xf; + did.uma_base = (mebase_l >> 20) | (mebase_h << 12); + + /* Send message to ME */ + printk(BIOS_DEBUG, "ME: Sending Init Done with status: %d, " + "UMA base: 0x%04x\n", status, did.uma_base); + + pci_write_dword_ptr(&did, PCI_ME_H_GS); + + /* Must wait for ME acknowledgement */ + for (count = ME_RETRY; count > 0; --count) { + pci_read_dword_ptr(&hfs, PCI_ME_HFS); + if (hfs.bios_msg_ack) + break; + udelay(ME_DELAY); + } + if (!count) { + printk(BIOS_ERR, "ERROR: ME failed to respond\n"); + return -1; + } + + /* Return the requested BIOS action */ + printk(BIOS_NOTICE, "ME: Requested BIOS Action: %s\n", + me_ack_values[hfs.ack_data]); + + /* Check status after acknowledgement */ + intel_early_me_status(); + + reset = 0; + switch (hfs.ack_data) { + case ME_HFS_ACK_CONTINUE: + /* Continue to boot */ + return 0; + case ME_HFS_ACK_RESET: + /* Non-power cycle reset */ + set_global_reset(0); + reset = 0x06; + break; + case ME_HFS_ACK_PWR_CYCLE: + /* Power cycle reset */ + set_global_reset(0); + reset = 0x0e; + break; + case ME_HFS_ACK_GBL_RESET: + /* Global reset */ + set_global_reset(1); + reset = 0x0e; + break; + case ME_HFS_ACK_S3: + case ME_HFS_ACK_S4: + case ME_HFS_ACK_S5: + break; + } + + /* Perform the requested reset */ + if (reset) { + outb(reset, 0xcf9); + hlt(); + } + return -1; +} diff --git a/src/southbridge/intel/fsp_bd82x6x/early_smbus.c b/src/southbridge/intel/fsp_bd82x6x/early_smbus.c new file mode 100644 index 0000000..de189a1 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/early_smbus.c @@ -0,0 +1,216 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2012 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <device/pci_def.h> +#include <device/smbus_def.h> +#include "pch.h" + +#define FULL_RW 0x48 +#define QUICK_RW 0x44 + +static void smbus_delay(void) +{ + inb(0xeb); +} + +/** \brief block until the SMBus is no longer busy, or it times out + * + * \param smbus_base IO base address of the SMBus + */ +static int smbus_wait_until_ready(u16 smbus_base) +{ + unsigned loops = SMBUS_TIMEOUT; + unsigned char byte; + do { + smbus_delay(); + if (--loops == 0) + break; + byte = inb(smbus_base + SMBHSTSTAT); + } while (byte & HSTSTS_HOST_BUSY); + return loops ? 0 : -1; +} + +/** \brief block until the SMBus is no longer busy or in use, or it times out + * + * \param smbus_base IO base address of the SMBus + */ +static int smbus_wait_until_done(u16 smbus_base) +{ + unsigned loops = SMBUS_TIMEOUT; + unsigned char byte; + do { + smbus_delay(); + if (--loops == 0) + break; + byte = inb(smbus_base + SMBHSTSTAT); + } while ((byte & HSTSTS_HOST_BUSY) || + (byte & ~(HSTSTS_INUSE_STS | HSTSTS_HOST_BUSY)) == 0); + return loops ? 0 : -1; +} +/** \brief Sets the SMBus BAR, and configures it to run + * + */ +void enable_smbus(void) +{ + device_t dev; + + /* Set the SMBus device statically. */ + dev = PCI_DEV(0x0, 0x1f, 0x3); + + /* Check to make sure we've got the right device. */ + if (pci_read_config16(dev, 0x0) != 0x8086) { + die("SMBus controller not found!"); + } + + /* Set SMBus I/O base. */ + pci_write_config32(dev, SMB_BASE, SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO); + + /* Set SMBus enable. */ + pci_write_config8(dev, HOSTC, HST_EN); + + /* Set SMBus I/O space enable. */ + pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO); + + /* Disable interrupt generation. */ + outb(0, SMBUS_IO_BASE + SMBHSTCTL); + + /* Clear any lingering errors, so transactions can run. */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + print_debug("SMBus controller enabled.\n"); +} + +/** \brief generic smbus helper function to read & write to the smbus + * + * \details Configures the SMBus for the transaction, sets up the address + * and data bytes, starts the command, waits for the command to + * finish, and returns data if the command is a read. + * + * \param device The 8-bit device address, with the read / write bit set-up. + * + * \param addr_dat For full reads/writes, this contains the address within + * the device of the byte being read/written. For quick writes, + * this contains the data to write. + * + * \param data For full writes, this contains the Data to write to the + * device. For all other transactions, this is ignored. + * + * \param command Contains the command for a full read/write (0x48) or the + * command for a quick read/write (0x44) + * + * \return Data read from the device, or -1 if there was an error + */ +static s16 smbus_rw_byte(u8 device, u8 addr_dat, u8 data, u8 command) +{ + u8 global_status_register; + + if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + + /*** Set up transaction ***/ + + /* Disable interrupts */ + outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL); + + /* Set the device being talked to using supplied device address*/ + outb(device, SMBUS_IO_BASE + SMBXMITADD); + + /* Set the address and data byte */ + outb(addr_dat, SMBUS_IO_BASE + SMBHSTCMD); + outb(data, SMBUS_IO_BASE + SMBHSTDAT0); + + /* Clear any lingering errors, so the transaction will run */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + + /* Start the command */ + outb(command, SMBUS_IO_BASE + SMBHSTCTL); + + /* Poll for transaction completion */ + if (smbus_wait_until_done(SMBUS_IO_BASE) < 0) + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + + global_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT); + + /* Ignore the "In Use" status... */ + global_status_register &= ~(HSTSTS_SMBALERT_STS | HSTSTS_INUSE_STS); + + /* Read results - INTR gets set when a command is completed successfully */ + data = inb(SMBUS_IO_BASE + SMBHSTDAT0); + if (global_status_register != HSTSTS_INTR) + return SMBUS_ERROR; + + return data; +} + +/** \brief Sends an address and writes one byte of data + * + * \param device The 7-bit address of the device being written to + * + * \param address The address within the device to write the data to + * + * \param data The data value to write to the device + * + * \return -1 if there was an error + */ +s16 smbus_write_single_byte(u8 device, u8 address, u8 data) +{ + return (smbus_rw_byte(device << 1, address, data, FULL_RW)); +} + +/** \brief Sends an address and reads one byte of data + * + * \param device The 7-bit address of the device being written to + * + * \param address The address within the device to write the data to + * + * \return Data read from the device, or -1 if there was an error + */ +int smbus_read_byte(unsigned device, unsigned address) +{ + return (smbus_rw_byte((device << 1) | 1, address, 0, FULL_RW)); +} + +/** \brief Sends one byte of data with no address byte + * + * \param device The 7-bit address of the device being written to + * + * \param data The data value to write to the device + * + * \return -1 if there was an error + */ +s16 smbus_quick_write(u8 device, u8 data) +{ + return (smbus_rw_byte(device << 1, data, 0, QUICK_RW)); +} + +/** \brief Reads one byte of data without sending an address byte + * + * \param device The 7-bit address of the device being written to + * + * \return Data read from the device, or -1 if there was an error + */ +s16 smbus_quick_read(u8 device) +{ + return (smbus_rw_byte((device << 1) | 1, 0, 0, QUICK_RW)); +} + diff --git a/src/southbridge/intel/fsp_bd82x6x/early_spi.c b/src/southbridge/intel/fsp_bd82x6x/early_spi.c new file mode 100644 index 0000000..94f1041 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/early_spi.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <device/pci_def.h> +#include <delay.h> +#include "pch.h" + +#define SPI_DELAY 10 /* 10us */ +#define SPI_RETRY 200000 /* 2s */ + +static int early_spi_read_block(u32 offset, u8 size, u8 *buffer) +{ + u32 *ptr32 = (u32*)buffer; + u32 i; + + /* Clear status bits */ + RCBA16(SPIBAR_HSFS) |= SPIBAR_HSFS_AEL | SPIBAR_HSFS_FCERR | + SPIBAR_HSFS_FDONE; + + if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { + printk(BIOS_ERR, "SPI ERROR: transaction in progress\n"); + return -1; + } + + /* Set flash address */ + RCBA32(SPIBAR_FADDR) = offset; + + /* Setup read transaction */ + RCBA16(SPIBAR_HSFC) = SPIBAR_HSFC_BYTE_COUNT(size) | + SPIBAR_HSFC_CYCLE_READ; + + /* Start transactinon */ + RCBA16(SPIBAR_HSFC) |= SPIBAR_HSFC_GO; + + /* Wait for completion */ + for (i = 0; i < SPI_RETRY; i++) { + if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { + /* Cycle in progress, wait 1ms */ + udelay(SPI_DELAY); + continue; + } + + if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_AEL) { + printk(BIOS_ERR, "SPI ERROR: Access Error\n"); + return -1; + + } + + if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_FCERR) { + printk(BIOS_ERR, "SPI ERROR: Flash Cycle Error\n"); + return -1; + } + break; + } + + if (i >= SPI_RETRY) { + printk(BIOS_ERR, "SPI ERROR: Timeout\n"); + return -1; + } + + /* Read the data */ + for (i = 0; i < size; i+=sizeof(u32)) { + if (size-i >= 4) { + /* reading >= dword */ + *ptr32++ = RCBA32(SPIBAR_FDATA(i/sizeof(u32))); + } else { + /* reading < dword */ + u8 j, *ptr8 = (u8*)ptr32; + u32 temp = RCBA32(SPIBAR_FDATA(i/sizeof(u32))); + for (j = 0; j < (size-i); j++) { + *ptr8++ = temp & 0xff; + temp >>= 8; + } + } + } + + return size; +} + +int early_spi_read(u32 offset, u32 size, u8 *buffer) +{ + u32 current = 0; + + while (size > 0) { + u8 count = (size < 64) ? size : 64; + if (early_spi_read_block(offset + current, count, + buffer + current) < 0) + return -1; + size -= count; + current += count; + } + + return 0; +} diff --git a/src/southbridge/intel/fsp_bd82x6x/early_usb.c b/src/southbridge/intel/fsp_bd82x6x/early_usb.c new file mode 100644 index 0000000..ba546e0 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/early_usb.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <device/pci_def.h> +#include "pch.h" + +#define PCH_EHCI1_TEMP_BAR0 0xe8000000 +#define PCH_EHCI2_TEMP_BAR0 0xe8000400 + +/* + * Setup USB controller MMIO BAR to prevent the + * reference code from resetting the controller. + * + * The BAR will be re-assigned during device + * enumeration so these are only temporary. + */ +void enable_usb_bar(void) +{ + device_t usb0 = PCH_EHCI1_DEV; + device_t usb1 = PCH_EHCI2_DEV; + u32 cmd; + + /* USB Controller 1 */ + pci_write_config32(usb0, PCI_BASE_ADDRESS_0, + PCH_EHCI1_TEMP_BAR0); + cmd = pci_read_config32(usb0, PCI_COMMAND); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config32(usb0, PCI_COMMAND, cmd); + + /* USB Controller 2 */ + pci_write_config32(usb1, PCI_BASE_ADDRESS_0, + PCH_EHCI2_TEMP_BAR0); + cmd = pci_read_config32(usb1, PCI_COMMAND); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config32(usb1, PCI_COMMAND, cmd); +} diff --git a/src/southbridge/intel/fsp_bd82x6x/elog.c b/src/southbridge/intel/fsp_bd82x6x/elog.c new file mode 100644 index 0000000..09dfcdb --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/elog.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA + */ + +#include <arch/io.h> +#include <arch/acpi.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ops.h> +#include <stdint.h> +#include <string.h> +#include <elog.h> +#include "pch.h" + +void pch_log_state(void) +{ + u16 pm1_sts, gen_pmcon_3, tco2_sts; + u32 gpe0_sts, gpe0_en; + u8 gen_pmcon_2; + int i; + struct device *lpc = dev_find_slot(0, PCI_DEVFN(0x1f, 0)); + if (!lpc) + return; + + pm1_sts = inw(DEFAULT_PMBASE + PM1_STS); + gpe0_sts = inl(DEFAULT_PMBASE + GPE0_STS); + gpe0_en = inl(DEFAULT_PMBASE + GPE0_EN); + tco2_sts = inw(DEFAULT_PMBASE + TCO2_STS); + gen_pmcon_2 = pci_read_config8(lpc, GEN_PMCON_2); + gen_pmcon_3 = pci_read_config16(lpc, GEN_PMCON_3); + + /* PWR_FLR Power Failure */ + if (gen_pmcon_2 & (1 << 0)) + elog_add_event(ELOG_TYPE_POWER_FAIL); + + /* SUS Well Power Failure */ + if (gen_pmcon_3 & (1 << 14)) + elog_add_event(ELOG_TYPE_SUS_POWER_FAIL); + + /* SYS_PWROK Failure */ + if (gen_pmcon_2 & (1 << 1)) + elog_add_event(ELOG_TYPE_SYS_PWROK_FAIL); + + /* PWROK Failure */ + if (gen_pmcon_2 & (1 << 0)) + elog_add_event(ELOG_TYPE_PWROK_FAIL); + + /* Second TCO Timeout */ + if (tco2_sts & (1 << 1)) + elog_add_event(ELOG_TYPE_TCO_RESET); + + /* Power Button Override */ + if (pm1_sts & (1 << 11)) + elog_add_event(ELOG_TYPE_POWER_BUTTON_OVERRIDE); + + /* System Reset Status (reset button pushed) */ + if (gen_pmcon_2 & (1 << 4)) + elog_add_event(ELOG_TYPE_RESET_BUTTON); + + /* General Reset Status */ + if (gen_pmcon_3 & (1 << 9)) + elog_add_event(ELOG_TYPE_SYSTEM_RESET); + + /* ACPI Wake */ + if (pm1_sts & (1 << 15)) + elog_add_event_byte(ELOG_TYPE_ACPI_WAKE, + acpi_slp_type == 3 ? 3 : 5); + + /* + * Wake sources + */ + + /* RTC */ + if (pm1_sts & (1 << 10)) + elog_add_event_wake(ELOG_WAKE_SOURCE_RTC, 0); + + /* PCI Express (TODO: determine wake device) */ + if (pm1_sts & (1 << 14)) + elog_add_event_wake(ELOG_WAKE_SOURCE_PCIE, 0); + + /* PME (TODO: determine wake device) */ + if (gpe0_sts & (1 << 13)) + elog_add_event_wake(ELOG_WAKE_SOURCE_PME, 0); + + /* Internal PME (TODO: determine wake device) */ + if (gpe0_sts & (1 << 13)) + elog_add_event_wake(ELOG_WAKE_SOURCE_PME_INTERNAL, 0); + + /* GPIO 0-15 */ + for (i = 0; i < 16; i++) { + if ((gpe0_sts & (1 << (16+i))) && (gpe0_en & (1 << (16+i)))) + elog_add_event_wake(ELOG_WAKE_SOURCE_GPIO, i); + } + + /* SMBUS Wake */ + if (gpe0_sts & (1 << 7)) + elog_add_event_wake(ELOG_WAKE_SOURCE_SMBUS, 0); +} diff --git a/src/southbridge/intel/fsp_bd82x6x/finalize.c b/src/southbridge/intel/fsp_bd82x6x/finalize.c new file mode 100644 index 0000000..2af7045 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/finalize.c @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/post_codes.h> +#include "pch.h" +#include <spi-generic.h> + +void intel_pch_finalize_smm(void) +{ + /* Set SPI opcode menu */ + RCBA16(0x3894) = SPI_OPPREFIX; + RCBA16(0x3896) = SPI_OPTYPE; + RCBA32(0x3898) = SPI_OPMENU_LOWER; + RCBA32(0x389c) = SPI_OPMENU_UPPER; + + /* Lock SPIBAR */ + RCBA32_OR(0x3804, (1 << 15)); + +#if CONFIG_SPI_FLASH_SMM + /* Re-init SPI driver to handle locked BAR */ + spi_init(); +#endif + + /* TCLOCKDN: TC Lockdown */ + RCBA32_OR(0x0050, (1 << 31)); + + /* BIOS Interface Lockdown */ + RCBA32_OR(0x3410, (1 << 0)); + + /* Function Disable SUS Well Lockdown */ + RCBA_AND_OR(8, 0x3420, ~0U, (1 << 7)); + + /* Global SMI Lock */ + pcie_or_config16(PCH_LPC_DEV, 0xa0, 1 << 4); + + /* GEN_PMCON Lock */ + pcie_or_config8(PCH_LPC_DEV, 0xa6, (1 << 1) | (1 << 2)); + + /* R/WO registers */ + RCBA32(0x21a4) = RCBA32(0x21a4); + pcie_write_config32(PCI_DEV(0, 27, 0), 0x74, + pcie_read_config32(PCI_DEV(0, 27, 0), 0x74)); + + /* Indicate finalize step with post code */ + outb(POST_OS_BOOT, 0x80); +} diff --git a/src/southbridge/intel/fsp_bd82x6x/gpio.c b/src/southbridge/intel/fsp_bd82x6x/gpio.c new file mode 100644 index 0000000..3df352c --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/gpio.c @@ -0,0 +1,135 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> + +#include "pch.h" +#include "gpio.h" + +#define MAX_GPIO_NUMBER 75 /* zero based */ +static const int gpio_reg_offsets[] = {GP_LVL, GP_LVL2, GP_LVL3}; + +void setup_pch_gpios(const struct pch_gpio_map *gpio) +{ + u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; + + /* GPIO Set 1 */ + if (gpio->set1.level) + outl(*((u32*)gpio->set1.level), gpiobase + GP_LVL); + if (gpio->set1.mode) + outl(*((u32*)gpio->set1.mode), gpiobase + GPIO_USE_SEL); + if (gpio->set1.direction) + outl(*((u32*)gpio->set1.direction), gpiobase + GP_IO_SEL); + if (gpio->set1.reset) + outl(*((u32*)gpio->set1.reset), gpiobase + GP_RST_SEL1); + if (gpio->set1.invert) + outl(*((u32*)gpio->set1.invert), gpiobase + GPI_INV); + if (gpio->set1.blink) + outl(*((u32*)gpio->set1.blink), gpiobase + GPO_BLINK); + + /* GPIO Set 2 */ + if (gpio->set2.level) + outl(*((u32*)gpio->set2.level), gpiobase + GP_LVL2); + if (gpio->set2.mode) + outl(*((u32*)gpio->set2.mode), gpiobase + GPIO_USE_SEL2); + if (gpio->set2.direction) + outl(*((u32*)gpio->set2.direction), gpiobase + GP_IO_SEL2); + if (gpio->set2.reset) + outl(*((u32*)gpio->set2.reset), gpiobase + GP_RST_SEL2); + + /* GPIO Set 3 */ + if (gpio->set3.level) + outl(*((u32*)gpio->set3.level), gpiobase + GP_LVL3); + if (gpio->set3.mode) + outl(*((u32*)gpio->set3.mode), gpiobase + GPIO_USE_SEL3); + if (gpio->set3.direction) + outl(*((u32*)gpio->set3.direction), gpiobase + GP_IO_SEL3); + if (gpio->set3.reset) + outl(*((u32*)gpio->set3.reset), gpiobase + GP_RST_SEL3); +} + +int get_gpio(int gpio_num) +{ + u16 gpio_base = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; + int index, bit; + + if (gpio_num > MAX_GPIO_NUMBER) + return 0; /* Just ignore wrong gpio numbers. */ + + index = gpio_num / 32; + bit = gpio_num % 32; + + return (inl(gpio_base + gpio_reg_offsets[index]) >> bit) & 1; +} + +void set_gpio(int gpio_num) +{ + u16 gpio_base = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; + u32 index, bit, level; + + if (gpio_num <= MAX_GPIO_NUMBER){ + + index = gpio_num / 32; + bit = gpio_num % 32; + level = inl(gpio_base + gpio_reg_offsets[index]); + + outl((gpio_base + gpio_reg_offsets[index]), level | (1UL << bit)); + + } + + return; +} +void clear_gpio(int gpio_num) +{ + u16 gpio_base = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; + u32 index, bit, level; + + if (gpio_num <= MAX_GPIO_NUMBER){ + index = gpio_num / 32; + bit = gpio_num % 32; + level = inl(gpio_base + gpio_reg_offsets[index]); + + outl((gpio_base + gpio_reg_offsets[index]), level & (~(1UL << bit))); + } + + return; +} + + +/* + * get a number comprised of multiple GPIO values. gpio_num_array points to + * the array of gpio pin numbers to scan, terminated by -1. + */ +unsigned get_gpios(const int *gpio_num_array) +{ + int gpio; + unsigned bitmask = 1; + unsigned vector = 0; + + while (bitmask && + ((gpio = *gpio_num_array++) != -1)) { + if (get_gpio(gpio)) + vector |= bitmask; + bitmask <<= 1; + } + return vector; +} diff --git a/src/southbridge/intel/fsp_bd82x6x/gpio.h b/src/southbridge/intel/fsp_bd82x6x/gpio.h new file mode 100644 index 0000000..64eb65b --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/gpio.h @@ -0,0 +1,194 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef INTEL_BD82X6X_GPIO_H +#define INTEL_BD82X6X_GPIO_H + +#define GPIO_MODE_NATIVE 0 +#define GPIO_MODE_GPIO 1 +#define GPIO_MODE_NONE 1 + +#define GPIO_DIR_OUTPUT 0 +#define GPIO_DIR_INPUT 1 + +#define GPIO_NO_INVERT 0 +#define GPIO_INVERT 1 + +#define GPIO_LEVEL_LOW 0 +#define GPIO_LEVEL_HIGH 1 + +#define GPIO_NO_BLINK 0 +#define GPIO_BLINK 1 + +#define GPIO_RESET_PWROK 0 +#define GPIO_RESET_RSMRST 1 + +struct pch_gpio_set1 { + u32 gpio0 : 1; + u32 gpio1 : 1; + u32 gpio2 : 1; + u32 gpio3 : 1; + u32 gpio4 : 1; + u32 gpio5 : 1; + u32 gpio6 : 1; + u32 gpio7 : 1; + u32 gpio8 : 1; + u32 gpio9 : 1; + u32 gpio10 : 1; + u32 gpio11 : 1; + u32 gpio12 : 1; + u32 gpio13 : 1; + u32 gpio14 : 1; + u32 gpio15 : 1; + u32 gpio16 : 1; + u32 gpio17 : 1; + u32 gpio18 : 1; + u32 gpio19 : 1; + u32 gpio20 : 1; + u32 gpio21 : 1; + u32 gpio22 : 1; + u32 gpio23 : 1; + u32 gpio24 : 1; + u32 gpio25 : 1; + u32 gpio26 : 1; + u32 gpio27 : 1; + u32 gpio28 : 1; + u32 gpio29 : 1; + u32 gpio30 : 1; + u32 gpio31 : 1; +} __attribute__ ((packed)); + +struct pch_gpio_set2 { + u32 gpio32 : 1; + u32 gpio33 : 1; + u32 gpio34 : 1; + u32 gpio35 : 1; + u32 gpio36 : 1; + u32 gpio37 : 1; + u32 gpio38 : 1; + u32 gpio39 : 1; + u32 gpio40 : 1; + u32 gpio41 : 1; + u32 gpio42 : 1; + u32 gpio43 : 1; + u32 gpio44 : 1; + u32 gpio45 : 1; + u32 gpio46 : 1; + u32 gpio47 : 1; + u32 gpio48 : 1; + u32 gpio49 : 1; + u32 gpio50 : 1; + u32 gpio51 : 1; + u32 gpio52 : 1; + u32 gpio53 : 1; + u32 gpio54 : 1; + u32 gpio55 : 1; + u32 gpio56 : 1; + u32 gpio57 : 1; + u32 gpio58 : 1; + u32 gpio59 : 1; + u32 gpio60 : 1; + u32 gpio61 : 1; + u32 gpio62 : 1; + u32 gpio63 : 1; +} __attribute__ ((packed)); + +struct pch_gpio_set3 { + u32 gpio64 : 1; + u32 gpio65 : 1; + u32 gpio66 : 1; + u32 gpio67 : 1; + u32 gpio68 : 1; + u32 gpio69 : 1; + u32 gpio70 : 1; + u32 gpio71 : 1; + u32 gpio72 : 1; + u32 gpio73 : 1; + u32 gpio74 : 1; + u32 gpio75 : 1; + u32 fill_bitfield : 20; +} __attribute__ ((packed)); + +struct pch_gpio_map { + union { + struct { + const struct pch_gpio_set1 *mode; + const struct pch_gpio_set1 *direction; + const struct pch_gpio_set1 *level; + const struct pch_gpio_set1 *reset; + const struct pch_gpio_set1 *invert; + const struct pch_gpio_set1 *blink; + } set1; + struct { + const u32 *mode; + const u32 *direction; + const u32 *level; + const u32 *reset; + const u32 *invert; + const u32 *blink; + } set1_vals; + }; + + union { + struct { + const struct pch_gpio_set2 *mode; + const struct pch_gpio_set2 *direction; + const struct pch_gpio_set2 *level; + const struct pch_gpio_set2 *reset; + } set2; + struct { + const u32 *mode; + const u32 *direction; + const u32 *level; + const u32 *reset; + } set2_vals; + }; + + union { + struct { + const struct pch_gpio_set3 *mode; + const struct pch_gpio_set3 *direction; + const struct pch_gpio_set3 *level; + const struct pch_gpio_set3 *reset; + } set3; + struct { + const u32 *mode; + const u32 *direction; + const u32 *level; + const u32 *reset; + } set3_vals; + }; +}; + +/* Configure GPIOs with mainboard provided settings */ +void setup_pch_gpios(const struct pch_gpio_map *gpio); + +/* get GPIO and set pin values */ +int get_gpio(int gpio_num); +void set_gpio(int gpio_num); +void clear_gpio(int gpio_num); + +/* + * get a number comprised of multiple GPIO values. gpio_num_array points to + * the array of gpio pin numbers to scan, terminated by -1. + */ +unsigned get_gpios(const int *gpio_num_array); + +#endif diff --git a/src/southbridge/intel/fsp_bd82x6x/lpc.c b/src/southbridge/intel/fsp_bd82x6x/lpc.c new file mode 100644 index 0000000..2633a49 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/lpc.c @@ -0,0 +1,660 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <pc80/mc146818rtc.h> +#include <pc80/isa-dma.h> +#include <pc80/i8259.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <cpu/cpu.h> +#include <elog.h> +#include "pch.h" + +#define NMI_OFF 0 + +#define ENABLE_ACPI_MODE_IN_COREBOOT 0 +#define TEST_SMM_FLASH_LOCKDOWN 0 + +typedef struct southbridge_intel_fsp_bd82x6x_config config_t; + +static void pch_enable_apic(struct device *dev) +{ + int i; + u32 reg32; + volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR); + volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10); + + /* Enable ACPI I/O and power management. + * Set SCI IRQ to IRQ9 + */ + pci_write_config8(dev, ACPI_CNTL, 0x80); + + *ioapic_index = 0; + *ioapic_data = (1 << 25); + + /* affirm full set of redirection table entries ("write once") */ + *ioapic_index = 1; + reg32 = *ioapic_data; + *ioapic_index = 1; + *ioapic_data = reg32; + + *ioapic_index = 0; + reg32 = *ioapic_data; + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); + if (reg32 != (1 << 25)) + die("APIC Error\n"); + + printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); + for (i=0; i<3; i++) { + *ioapic_index = i; + printk(BIOS_SPEW, " reg 0x%04x:", i); + reg32 = *ioapic_data; + printk(BIOS_SPEW, " 0x%08x\n", reg32); + } + + *ioapic_index = 3; /* Select Boot Configuration register. */ + *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ +} + +static void pch_enable_serial_irqs(struct device *dev) +{ + /* Set packet length and toggle silent mode bit for one frame. */ + pci_write_config8(dev, SERIRQ_CNTL, + (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); +#if !CONFIG_SERIRQ_CONTINUOUS_MODE + pci_write_config8(dev, SERIRQ_CNTL, + (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0)); +#endif +} + +/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control + * 0x00 - 0000 = Reserved + * 0x01 - 0001 = Reserved + * 0x02 - 0010 = Reserved + * 0x03 - 0011 = IRQ3 + * 0x04 - 0100 = IRQ4 + * 0x05 - 0101 = IRQ5 + * 0x06 - 0110 = IRQ6 + * 0x07 - 0111 = IRQ7 + * 0x08 - 1000 = Reserved + * 0x09 - 1001 = IRQ9 + * 0x0A - 1010 = IRQ10 + * 0x0B - 1011 = IRQ11 + * 0x0C - 1100 = IRQ12 + * 0x0D - 1101 = Reserved + * 0x0E - 1110 = IRQ14 + * 0x0F - 1111 = IRQ15 + * PIRQ[n]_ROUT[7] - PIRQ Routing Control + * 0x80 - The PIRQ is not routed. + */ + +static void pch_pirq_init(device_t dev) +{ + device_t irq_dev; + /* Get the chip configuration */ + config_t *config = dev->chip_info; + + pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); + pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); + pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); + pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); + + pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); + pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); + pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); + pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); + + /* Eric Biederman once said we should let the OS do this. + * I am not so sure anymore he was right. + */ + + for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { + u8 int_pin=0, int_line=0; + + if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) + continue; + + int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); + + switch (int_pin) { + case 1: /* INTA# */ int_line = config->pirqa_routing; break; + case 2: /* INTB# */ int_line = config->pirqb_routing; break; + case 3: /* INTC# */ int_line = config->pirqc_routing; break; + case 4: /* INTD# */ int_line = config->pirqd_routing; break; + } + + if (!int_line) + continue; + + pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); + } +} + +static void pch_gpi_routing(device_t dev) +{ + /* Get the chip configuration */ + config_t *config = dev->chip_info; + u32 reg32 = 0; + + /* An array would be much nicer here, or some + * other method of doing this. + */ + reg32 |= (config->gpi0_routing & 0x03) << 0; + reg32 |= (config->gpi1_routing & 0x03) << 2; + reg32 |= (config->gpi2_routing & 0x03) << 4; + reg32 |= (config->gpi3_routing & 0x03) << 6; + reg32 |= (config->gpi4_routing & 0x03) << 8; + reg32 |= (config->gpi5_routing & 0x03) << 10; + reg32 |= (config->gpi6_routing & 0x03) << 12; + reg32 |= (config->gpi7_routing & 0x03) << 14; + reg32 |= (config->gpi8_routing & 0x03) << 16; + reg32 |= (config->gpi9_routing & 0x03) << 18; + reg32 |= (config->gpi10_routing & 0x03) << 20; + reg32 |= (config->gpi11_routing & 0x03) << 22; + reg32 |= (config->gpi12_routing & 0x03) << 24; + reg32 |= (config->gpi13_routing & 0x03) << 26; + reg32 |= (config->gpi14_routing & 0x03) << 28; + reg32 |= (config->gpi15_routing & 0x03) << 30; + + pci_write_config32(dev, 0xb8, reg32); +} + +static void pch_power_options(device_t dev) +{ + u8 reg8; + u16 reg16, pmbase; + u32 reg32; + const char *state; + /* Get the chip configuration */ + config_t *config = dev->chip_info; + + int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; + int nmi_option; + + /* Which state do we want to goto after g3 (power restored)? + * 0 == S0 Full On + * 1 == S5 Soft Off + * + * If the option is not existent (Laptops), use Kconfig setting. + */ + get_option(&pwr_on, "power_on_after_fail"); + + reg16 = pci_read_config16(dev, GEN_PMCON_3); + reg16 &= 0xfffe; + switch (pwr_on) { + case MAINBOARD_POWER_OFF: + reg16 |= 1; + state = "off"; + break; + case MAINBOARD_POWER_ON: + reg16 &= ~1; + state = "on"; + break; + case MAINBOARD_POWER_KEEP: + reg16 &= ~1; + state = "state keep"; + break; + default: + state = "undefined"; + } + + reg16 &= ~(3 << 4); /* SLP_S4# Assertion Stretch 4s */ + reg16 |= (1 << 3); /* SLP_S4# Assertion Stretch Enable */ + + reg16 &= ~(1 << 10); + reg16 |= (1 << 11); /* SLP_S3# Min Assertion Width 50ms */ + + reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */ + + pci_write_config16(dev, GEN_PMCON_3, reg16); + printk(BIOS_INFO, "Set power %s after power failure.\n", state); + + /* Set up NMI on errors. */ + reg8 = inb(0x61); + reg8 &= 0x0f; /* Higher Nibble must be 0 */ + reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ + // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ + reg8 |= (1 << 2); /* PCI SERR# Disable for now */ + outb(reg8, 0x61); + + reg8 = inb(0x70); + nmi_option = NMI_OFF; + get_option(&nmi_option, "nmi"); + if (nmi_option) { + printk(BIOS_INFO, "NMI sources enabled.\n"); + reg8 &= ~(1 << 7); /* Set NMI. */ + } else { + printk(BIOS_INFO, "NMI sources disabled.\n"); + reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ + } + outb(reg8, 0x70); + + /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */ + reg16 = pci_read_config16(dev, GEN_PMCON_1); + reg16 &= ~(3 << 0); // SMI# rate 1 minute + reg16 &= ~(1 << 10); // Disable BIOS_PCI_EXP_EN for native PME +#if DEBUG_PERIODIC_SMIS + /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using + * periodic SMIs. + */ + reg16 |= (3 << 0); // Periodic SMI every 8s +#endif + pci_write_config16(dev, GEN_PMCON_1, reg16); + + // Set the board's GPI routing. + pch_gpi_routing(dev); + + pmbase = pci_read_config16(dev, 0x40) & 0xfffe; + + outl(config->gpe0_en, pmbase + GPE0_EN); + outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN); + + /* Set up power management block and determine sleep mode */ + reg32 = inl(pmbase + 0x04); // PM1_CNT + reg32 &= ~(7 << 10); // SLP_TYP + reg32 |= (1 << 0); // SCI_EN + outl(reg32, pmbase + 0x04); + + /* Clear magic status bits to prevent unexpected wake */ + reg32 = RCBA32(0x3310); + reg32 |= (1 << 4)|(1 << 5)|(1 << 0); + RCBA32(0x3310) = reg32; +} + +static void pch_rtc_init(struct device *dev) +{ + u8 reg8; + int rtc_failed; + + reg8 = pci_read_config8(dev, GEN_PMCON_3); + rtc_failed = reg8 & RTC_BATTERY_DEAD; + if (rtc_failed) { + reg8 &= ~RTC_BATTERY_DEAD; + pci_write_config8(dev, GEN_PMCON_3, reg8); +#if CONFIG_ELOG + elog_add_event(ELOG_TYPE_RTC_RESET); +#endif + } + printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); + + rtc_init(rtc_failed); +} + +/* CougarPoint PCH Power Management init */ +static void cpt_pm_init(struct device *dev) +{ + printk(BIOS_DEBUG, "CougarPoint PM init\n"); + pci_write_config8(dev, 0xa9, 0x47); + RCBA32_AND_OR(0x2238, ~0UL, (1 << 6)|(1 << 0)); + RCBA32_AND_OR(0x228c, ~0UL, (1 << 0)); + RCBA16_AND_OR(0x1100, ~0UL, (1 << 13)|(1 << 14)); + RCBA16_AND_OR(0x0900, ~0UL, (1 << 14)); + RCBA32(0x2304) = 0xc0388400; + RCBA32_AND_OR(0x2314, ~0UL, (1 << 5)|(1 << 18)); + RCBA32_AND_OR(0x2320, ~0UL, (1 << 15)|(1 << 1)); + RCBA32_AND_OR(0x3314, ~0x1f, 0xf); + RCBA32(0x3318) = 0x050f0000; + RCBA32(0x3324) = 0x04000000; + RCBA32_AND_OR(0x3340, ~0UL, 0xfffff); + RCBA32_AND_OR(0x3344, ~0UL, (1 << 1)); + RCBA32(0x3360) = 0x0001c000; + RCBA32(0x3368) = 0x00061100; + RCBA32(0x3378) = 0x7f8fdfff; + RCBA32(0x337c) = 0x000003fc; + RCBA32(0x3388) = 0x00001000; + RCBA32(0x3390) = 0x0001c000; + RCBA32(0x33a0) = 0x00000800; + RCBA32(0x33b0) = 0x00001000; + RCBA32(0x33c0) = 0x00093900; + RCBA32(0x33cc) = 0x24653002; + RCBA32(0x33d0) = 0x062108fe; + RCBA32_AND_OR(0x33d4, 0xf000f000, 0x00670060); + RCBA32(0x3a28) = 0x01010000; + RCBA32(0x3a2c) = 0x01010404; + RCBA32(0x3a80) = 0x01041041; + RCBA32_AND_OR(0x3a84, ~0x0000ffff, 0x00001001); + RCBA32_AND_OR(0x3a84, ~0UL, (1 << 24)); /* SATA 2/3 disabled */ + RCBA32_AND_OR(0x3a88, ~0UL, (1 << 0)); /* SATA 4/5 disabled */ + RCBA32(0x3a6c) = 0x00000001; + RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c); + RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20); + RCBA32(0x33c8) = 0; + RCBA32_AND_OR(0x21b0, ~0UL, 0xf); +} + +/* PantherPoint PCH Power Management init */ +static void ppt_pm_init(struct device *dev) +{ + printk(BIOS_DEBUG, "PantherPoint PM init\n"); + pci_write_config8(dev, 0xa9, 0x47); + RCBA32_AND_OR(0x2238, ~0UL, (1 << 0)); + RCBA32_AND_OR(0x228c, ~0UL, (1 << 0)); + RCBA16_AND_OR(0x1100, ~0UL, (1 << 13)|(1 << 14)); + RCBA16_AND_OR(0x0900, ~0UL, (1 << 14)); + RCBA32(0x2304) = 0xc03b8400; + RCBA32_AND_OR(0x2314, ~0UL, (1 << 5)|(1 << 18)); + RCBA32_AND_OR(0x2320, ~0UL, (1 << 15)|(1 << 1)); + RCBA32_AND_OR(0x3314, ~0x1f, 0xf); + RCBA32(0x3318) = 0x054f0000; + RCBA32(0x3324) = 0x04000000; + RCBA32_AND_OR(0x3340, ~0UL, 0xfffff); + RCBA32_AND_OR(0x3344, ~0UL, (1 << 1)|(1 << 0)); + RCBA32(0x3360) = 0x0001c000; + RCBA32(0x3368) = 0x00061100; + RCBA32(0x3378) = 0x7f8fdfff; + RCBA32(0x337c) = 0x000003fd; + RCBA32(0x3388) = 0x00001000; + RCBA32(0x3390) = 0x0001c000; + RCBA32(0x33a0) = 0x00000800; + RCBA32(0x33b0) = 0x00001000; + RCBA32(0x33c0) = 0x00093900; + RCBA32(0x33cc) = 0x24653002; + RCBA32(0x33d0) = 0x067388fe; + RCBA32_AND_OR(0x33d4, 0xf000f000, 0x00670060); + RCBA32(0x3a28) = 0x01010000; + RCBA32(0x3a2c) = 0x01010404; + RCBA32(0x3a80) = 0x01040000; + RCBA32_AND_OR(0x3a84, ~0x0000ffff, 0x00001001); + RCBA32_AND_OR(0x3a84, ~0UL, (1 << 24)); /* SATA 2/3 disabled */ + RCBA32_AND_OR(0x3a88, ~0UL, (1 << 0)); /* SATA 4/5 disabled */ + RCBA32(0x3a6c) = 0x00000001; + RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c); + RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20); + RCBA32_AND_OR(0x33a4, ~0UL, (1 << 0)); + RCBA32(0x33c8) = 0; + RCBA32_AND_OR(0x21b0, ~0UL, 0xf); +} + +static void enable_hpet(void) +{ + u32 reg32; + + /* Move HPET to default address 0xfed00000 and enable it */ + reg32 = RCBA32(HPTC); + reg32 |= (1 << 7); // HPET Address Enable + reg32 &= ~(3 << 0); + RCBA32(HPTC) = reg32; +} + +#if CONFIG_HAVE_SMI_HANDLER +static void pch_lock_smm(struct device *dev) +{ +#if TEST_SMM_FLASH_LOCKDOWN + u8 reg8; +#endif + + if (acpi_slp_type != 3) { +#if ENABLE_ACPI_MODE_IN_COREBOOT + printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n"); + outb(0xe1, 0xb2); // Enable ACPI mode + printk(BIOS_DEBUG, "done.\n"); +#else + printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); + outb(0x1e, 0xb2); // Disable ACPI mode + printk(BIOS_DEBUG, "done.\n"); +#endif + } + + /* Don't allow evil boot loaders, kernels, or + * userspace applications to deceive us: + */ + smm_lock(); + +#if TEST_SMM_FLASH_LOCKDOWN + /* Now try this: */ + printk(BIOS_DEBUG, "Locking BIOS to RO... "); + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + (reg8&1)?"rw":"ro"); + reg8 &= ~(1 << 0); /* clear BIOSWE */ + pci_write_config8(dev, 0xdc, reg8); + reg8 |= (1 << 1); /* set BLE */ + pci_write_config8(dev, 0xdc, reg8); + printk(BIOS_DEBUG, "ok.\n"); + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + (reg8&1)?"rw":"ro"); + + printk(BIOS_DEBUG, "Writing:\n"); + *(volatile u8 *)0xfff00000 = 0x00; + printk(BIOS_DEBUG, "Testing:\n"); + reg8 |= (1 << 0); /* set BIOSWE */ + pci_write_config8(dev, 0xdc, reg8); + + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + (reg8&1)?"rw":"ro"); + printk(BIOS_DEBUG, "Done.\n"); +#endif +} +#endif + +static void pch_disable_smm_only_flashing(struct device *dev) +{ + u8 reg8; + + printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... "); + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + reg8 &= ~(1 << 5); + pci_write_config8(dev, 0xdc, reg8); +} + +static void pch_fixups(struct device *dev) +{ + u8 gen_pmcon_2; + + /* Indicate DRAM init done for MRC S3 to know it can resume */ + gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2); + gen_pmcon_2 |= (1 << 7); + pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2); + +} + +static void pch_decode_init(struct device *dev) +{ + config_t *config = dev->chip_info; + + printk(BIOS_DEBUG, "pch_decode_init\n"); + + pci_write_config32(dev, LPC_GEN1_DEC, config->gen1_dec); + pci_write_config32(dev, LPC_GEN2_DEC, config->gen2_dec); + pci_write_config32(dev, LPC_GEN3_DEC, config->gen3_dec); + pci_write_config32(dev, LPC_GEN4_DEC, config->gen4_dec); +} + +static void lpc_init(struct device *dev) +{ + printk(BIOS_DEBUG, "pch: lpc_init\n"); + + /* Set the value for PCI command register. */ + pci_write_config16(dev, PCI_COMMAND, 0x000f); + + /* IO APIC initialization. */ + pch_enable_apic(dev); + + pch_enable_serial_irqs(dev); + + /* Setup the PIRQ. */ + pch_pirq_init(dev); + + /* Setup power options. */ + pch_power_options(dev); + + /* Initialize power management */ + switch (pch_silicon_type()) { + case PCH_TYPE_CPT: /* CougarPoint */ + cpt_pm_init(dev); + break; + case PCH_TYPE_PPT: /* PantherPoint */ + ppt_pm_init(dev); + break; + default: + printk(BIOS_ERR, "Unknown Chipset: 0x%04x\n", dev->device); + } + + /* Set the state of the GPIO lines. */ + //gpio_init(dev); + + /* Initialize the real time clock. */ + pch_rtc_init(dev); + + /* Initialize ISA DMA. */ + isa_dma_init(); + + /* Initialize the High Precision Event Timers, if present. */ + enable_hpet(); + + setup_i8259(); + + /* The OS should do this? */ + /* Interrupt 9 should be level triggered (SCI) */ + i8259_configure_irq_trigger(9, 1); + + pch_disable_smm_only_flashing(dev); + +#if CONFIG_HAVE_SMI_HANDLER + pch_lock_smm(dev); +#endif + + pch_fixups(dev); +} + +static void pch_lpc_read_resources(device_t dev) +{ + struct resource *res; + config_t *config = dev->chip_info; + u8 io_index = 0; + + /* Get the normal PCI resources of this device. */ + pci_dev_read_resources(dev); + + /* Add an extra subtractive resource for both memory and I/O. */ + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = 0; + res->size = 0x1000; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = 0xff800000; + res->size = 0x00800000; /* 8 MB for flash */ + res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, 3); /* IOAPIC */ + res->base = IO_APIC_ADDR; + res->size = 0x00001000; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + /* Set PCH IO decode ranges if required.*/ + if ((config->gen1_dec & 0xFFFC) > 0x1000) { + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = config->gen1_dec & 0xFFFC; + res->size = (config->gen1_dec >> 16) & 0xFC; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + } + + if ((config->gen2_dec & 0xFFFC) > 0x1000) { + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = config->gen2_dec & 0xFFFC; + res->size = (config->gen2_dec >> 16) & 0xFC; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + } + + if ((config->gen3_dec & 0xFFFC) > 0x1000) { + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = config->gen3_dec & 0xFFFC; + res->size = (config->gen3_dec >> 16) & 0xFC; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + } + + if ((config->gen4_dec & 0xFFFC) > 0x1000) { + res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); + res->base = config->gen4_dec & 0xFFFC; + res->size = (config->gen4_dec >> 16) & 0xFC; + res->flags = IORESOURCE_IO| IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + } +} + +static void pch_lpc_enable_resources(device_t dev) +{ + pch_decode_init(dev); + return pci_dev_enable_resources(dev); +} + +static void pch_lpc_enable(device_t dev) +{ + pch_enable(dev); +} + +static void set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations pci_ops = { + .set_subsystem = set_subsystem, +}; + +static struct device_operations device_ops = { + .read_resources = pch_lpc_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pch_lpc_enable_resources, + .init = lpc_init, + .enable = pch_lpc_enable, + .scan_bus = scan_static_bus, + .ops_pci = &pci_ops, +}; + + +/* IDs for LPC device of Intel 6 Series Chipset, Intel 7 Series Chipset, and + * Intel C200 Series Chipset + */ + +static const unsigned short pci_device_ids[] = { 0x1c46, 0x1c47, 0x1c49, 0x1c4a, + 0x1c4b, 0x1c4c, 0x1c4d, 0x1c4e, + 0x1c4f, 0x1c50, 0x1c52, 0x1c54, + 0x1e55, 0x1c56, 0x1e57, 0x1c5c, + 0x1e5d, 0x1e5e, 0x1e5f, 0x2310, + 0 }; + +static const struct pci_driver pch_lpc __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; + + diff --git a/src/southbridge/intel/fsp_bd82x6x/me.c b/src/southbridge/intel/fsp_bd82x6x/me.c new file mode 100644 index 0000000..c61d12b --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/me.c @@ -0,0 +1,778 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* + * This is a ramstage driver for the Intel Management Engine found in the + * 6-series chipset. It handles the required boot-time messages over the + * MMIO-based Management Engine Interface to tell the ME that the BIOS is + * finished with POST. Additional messages are defined for debug but are + * not used unless the console loglevel is high enough. + */ + +#include <arch/acpi.h> +#include <arch/hlt.h> +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <device/pci_def.h> +#include <string.h> +#include <delay.h> +#include <elog.h> + +#ifndef __SMM__ +# include <device/device.h> +# include <device/pci.h> +#endif + +#include "me.h" +#include "pch.h" + +#if CONFIG_CHROMEOS +#include <vendorcode/google/chromeos/gnvs.h> +#endif + +#ifndef __SMM__ +/* Path that the BIOS should take based on ME state */ +static const char *me_bios_path_values[] = { + [ME_NORMAL_BIOS_PATH] = "Normal", + [ME_S3WAKE_BIOS_PATH] = "S3 Wake", + [ME_ERROR_BIOS_PATH] = "Error", + [ME_RECOVERY_BIOS_PATH] = "Recovery", + [ME_DISABLE_BIOS_PATH] = "Disable", + [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update", +}; +#endif + +/* MMIO base address for MEI interface */ +static u32 mei_base_address; + +#if CONFIG_DEBUG_INTEL_ME +static void mei_dump(void *ptr, int dword, int offset, const char *type) +{ + struct mei_csr *csr; + + printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset); + + switch (offset) { + case MEI_H_CSR: + case MEI_ME_CSR_HA: + csr = ptr; + if (!csr) { + printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword); + break; + } + printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u " + "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth, + csr->buffer_read_ptr, csr->buffer_write_ptr, + csr->ready, csr->reset, csr->interrupt_generate, + csr->interrupt_status, csr->interrupt_enable); + break; + case MEI_ME_CB_RW: + case MEI_H_CB_WW: + printk(BIOS_SPEW, "CB: 0x%08x\n", dword); + break; + default: + printk(BIOS_SPEW, "0x%08x\n", offset); + break; + } +} +#else +# define mei_dump(ptr,dword,offset,type) do {} while (0) +#endif + +/* + * ME/MEI access helpers using memcpy to avoid aliasing. + */ + +static inline void mei_read_dword_ptr(void *ptr, int offset) +{ + u32 dword = read32(mei_base_address + offset); + memcpy(ptr, &dword, sizeof(dword)); + mei_dump(ptr, dword, offset, "READ"); +} + +static inline void mei_write_dword_ptr(void *ptr, int offset) +{ + u32 dword = 0; + memcpy(&dword, ptr, sizeof(dword)); + write32(mei_base_address + offset, dword); + mei_dump(ptr, dword, offset, "WRITE"); +} + +#ifndef __SMM__ +static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset) +{ + u32 dword = pci_read_config32(dev, offset); + memcpy(ptr, &dword, sizeof(dword)); + mei_dump(ptr, dword, offset, "PCI READ"); +} +#endif + +static inline void read_host_csr(struct mei_csr *csr) +{ + mei_read_dword_ptr(csr, MEI_H_CSR); +} + +static inline void write_host_csr(struct mei_csr *csr) +{ + mei_write_dword_ptr(csr, MEI_H_CSR); +} + +static inline void read_me_csr(struct mei_csr *csr) +{ + mei_read_dword_ptr(csr, MEI_ME_CSR_HA); +} + +static inline void write_cb(u32 dword) +{ + write32(mei_base_address + MEI_H_CB_WW, dword); + mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE"); +} + +static inline u32 read_cb(void) +{ + u32 dword = read32(mei_base_address + MEI_ME_CB_RW); + mei_dump(NULL, dword, MEI_ME_CB_RW, "READ"); + return dword; +} + +/* Wait for ME ready bit to be asserted */ +static int mei_wait_for_me_ready(void) +{ + struct mei_csr me; + unsigned try = ME_RETRY; + + while (try--) { + read_me_csr(&me); + if (me.ready) + return 0; + udelay(ME_DELAY); + } + + printk(BIOS_ERR, "ME: failed to become ready\n"); + return -1; +} + +static void mei_reset(void) +{ + struct mei_csr host; + + if (mei_wait_for_me_ready() < 0) + return; + + /* Reset host and ME circular buffers for next message */ + read_host_csr(&host); + host.reset = 1; + host.interrupt_generate = 1; + write_host_csr(&host); + + if (mei_wait_for_me_ready() < 0) + return; + + /* Re-init and indicate host is ready */ + read_host_csr(&host); + host.interrupt_generate = 1; + host.ready = 1; + host.reset = 0; + write_host_csr(&host); +} + +static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi, + void *req_data) +{ + struct mei_csr host; + unsigned ndata, n; + u32 *data; + + /* Number of dwords to write, ignoring MKHI */ + ndata = mei->length >> 2; + + /* Pad non-dword aligned request message length */ + if (mei->length & 3) + ndata++; + if (!ndata) { + printk(BIOS_DEBUG, "ME: request does not include MKHI\n"); + return -1; + } + ndata++; /* Add MEI header */ + + /* + * Make sure there is still room left in the circular buffer. + * Reset the buffer pointers if the requested message will not fit. + */ + read_host_csr(&host); + if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { + printk(BIOS_ERR, "ME: circular buffer full, resetting...\n"); + mei_reset(); + read_host_csr(&host); + } + + /* + * This implementation does not handle splitting large messages + * across multiple transactions. Ensure the requested length + * will fit in the available circular buffer depth. + */ + if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { + printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n", + ndata + 2, host.buffer_depth); + return -1; + } + + /* Write MEI header */ + mei_write_dword_ptr(mei, MEI_H_CB_WW); + ndata--; + + /* Write MKHI header */ + mei_write_dword_ptr(mkhi, MEI_H_CB_WW); + ndata--; + + /* Write message data */ + data = req_data; + for (n = 0; n < ndata; ++n) + write_cb(*data++); + + /* Generate interrupt to the ME */ + read_host_csr(&host); + host.interrupt_generate = 1; + write_host_csr(&host); + + /* Make sure ME is ready after sending request data */ + return mei_wait_for_me_ready(); +} + +static int mei_recv_msg(struct mei_header *mei, struct mkhi_header *mkhi, + void *rsp_data, int rsp_bytes) +{ + struct mei_header mei_rsp; + struct mkhi_header mkhi_rsp; + struct mei_csr me, host; + unsigned ndata, n; + unsigned expected; + u32 *data; + + /* Total number of dwords to read from circular buffer */ + expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2; + if (rsp_bytes & 3) + expected++; + + /* + * The interrupt status bit does not appear to indicate that the + * message has actually been received. Instead we wait until the + * expected number of dwords are present in the circular buffer. + */ + for (n = ME_RETRY; n; --n) { + read_me_csr(&me); + if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected) + break; + udelay(ME_DELAY); + } + if (!n) { + printk(BIOS_ERR, "ME: timeout waiting for data: expected " + "%u, available %u\n", expected, + me.buffer_write_ptr - me.buffer_read_ptr); + return -1; + } + + /* Read and verify MEI response header from the ME */ + mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW); + if (!mei_rsp.is_complete) { + printk(BIOS_ERR, "ME: response is not complete\n"); + return -1; + } + + /* Handle non-dword responses and expect at least MKHI header */ + ndata = mei_rsp.length >> 2; + if (mei_rsp.length & 3) + ndata++; + if (ndata != (expected - 1)) { + printk(BIOS_ERR, "ME: response is missing data\n"); + return -1; + } + + /* Read and verify MKHI response header from the ME */ + mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW); + if (!mkhi_rsp.is_response || + mkhi->group_id != mkhi_rsp.group_id || + mkhi->command != mkhi_rsp.command) { + printk(BIOS_ERR, "ME: invalid response, group %u ?= %u, " + "command %u ?= %u, is_response %u\n", mkhi->group_id, + mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command, + mkhi_rsp.is_response); + return -1; + } + ndata--; /* MKHI header has been read */ + + /* Make sure caller passed a buffer with enough space */ + if (ndata != (rsp_bytes >> 2)) { + printk(BIOS_ERR, "ME: not enough room in response buffer: " + "%u != %u\n", ndata, rsp_bytes >> 2); + return -1; + } + + /* Read response data from the circular buffer */ + data = rsp_data; + for (n = 0; n < ndata; ++n) + *data++ = read_cb(); + + /* Tell the ME that we have consumed the response */ + read_host_csr(&host); + host.interrupt_status = 1; + host.interrupt_generate = 1; + write_host_csr(&host); + + return mei_wait_for_me_ready(); +} + +static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi, + void *req_data, void *rsp_data, int rsp_bytes) +{ + if (mei_send_msg(mei, mkhi, req_data) < 0) + return -1; + if (mei_recv_msg(mei, mkhi, rsp_data, rsp_bytes) < 0) + return -1; + return 0; +} + +#ifdef __SMM__ +/* Send END OF POST message to the ME */ +static int mkhi_end_of_post(void) +{ + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_GEN, + .command = MKHI_END_OF_POST, + }; + struct mei_header mei = { + .is_complete = 1, + .host_address = MEI_HOST_ADDRESS, + .client_address = MEI_ADDRESS_MKHI, + .length = sizeof(mkhi), + }; + + /* Send request and wait for response */ + if (mei_sendrecv(&mei, &mkhi, NULL, NULL, 0) < 0) { + printk(BIOS_ERR, "ME: END OF POST message failed\n"); + return -1; + } + + printk(BIOS_INFO, "ME: END OF POST message successful\n"); + return 0; +} +#endif + +#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) && !defined(__SMM__) +/* Get ME firmware version */ +static int mkhi_get_fw_version(void) +{ + struct me_fw_version version; + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_GEN, + .command = MKHI_GET_FW_VERSION, + }; + struct mei_header mei = { + .is_complete = 1, + .host_address = MEI_HOST_ADDRESS, + .client_address = MEI_ADDRESS_MKHI, + .length = sizeof(mkhi), + }; + + /* Send request and wait for response */ + if (mei_sendrecv(&mei, &mkhi, NULL, &version, sizeof(version)) < 0) { + printk(BIOS_ERR, "ME: GET FW VERSION message failed\n"); + return -1; + } + + printk(BIOS_INFO, "ME: Firmware Version %u.%u.%u.%u (code) " + "%u.%u.%u.%u (recovery)\n", + version.code_major, version.code_minor, + version.code_build_number, version.code_hot_fix, + version.recovery_major, version.recovery_minor, + version.recovery_build_number, version.recovery_hot_fix); + + return 0; +} + +static inline void print_cap(const char *name, int state) +{ + printk(BIOS_DEBUG, "ME Capability: %-30s : %sabled\n", + name, state ? "en" : "dis"); +} + +/* Get ME Firmware Capabilities */ +static int mkhi_get_fwcaps(void) +{ + u32 rule_id = 0; + struct me_fwcaps cap; + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_FWCAPS, + .command = MKHI_FWCAPS_GET_RULE, + }; + struct mei_header mei = { + .is_complete = 1, + .host_address = MEI_HOST_ADDRESS, + .client_address = MEI_ADDRESS_MKHI, + .length = sizeof(mkhi) + sizeof(rule_id), + }; + + /* Send request and wait for response */ + if (mei_sendrecv(&mei, &mkhi, &rule_id, &cap, sizeof(cap)) < 0) { + printk(BIOS_ERR, "ME: GET FWCAPS message failed\n"); + return -1; + } + + print_cap("Full Network manageability", cap.caps_sku.full_net); + print_cap("Regular Network manageability", cap.caps_sku.std_net); + print_cap("Manageability", cap.caps_sku.manageability); + print_cap("Small business technology", cap.caps_sku.small_business); + print_cap("Level III manageability", cap.caps_sku.l3manageability); + print_cap("IntelR Anti-Theft (AT)", cap.caps_sku.intel_at); + print_cap("IntelR Capability Licensing Service (CLS)", + cap.caps_sku.intel_cls); + print_cap("IntelR Power Sharing Technology (MPC)", + cap.caps_sku.intel_mpc); + print_cap("ICC Over Clocking", cap.caps_sku.icc_over_clocking); + print_cap("Protected Audio Video Path (PAVP)", cap.caps_sku.pavp); + print_cap("IPV6", cap.caps_sku.ipv6); + print_cap("KVM Remote Control (KVM)", cap.caps_sku.kvm); + print_cap("Outbreak Containment Heuristic (OCH)", cap.caps_sku.och); + print_cap("Virtual LAN (VLAN)", cap.caps_sku.vlan); + print_cap("TLS", cap.caps_sku.tls); + print_cap("Wireless LAN (WLAN)", cap.caps_sku.wlan); + + return 0; +} +#endif + +#if CONFIG_CHROMEOS && 0 /* DISABLED */ +/* Tell ME to issue a global reset */ +int mkhi_global_reset(void) +{ + struct me_global_reset reset = { + .request_origin = GLOBAL_RESET_BIOS_POST, + .reset_type = CBM_RR_GLOBAL_RESET, + }; + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_CBM, + .command = MKHI_GLOBAL_RESET, + }; + struct mei_header mei = { + .is_complete = 1, + .length = sizeof(mkhi) + sizeof(reset), + .host_address = MEI_HOST_ADDRESS, + .client_address = MEI_ADDRESS_MKHI, + }; + + printk(BIOS_NOTICE, "ME: Requesting global reset\n"); + + /* Send request and wait for response */ + if (mei_sendrecv(&mei, &mkhi, &reset, NULL, 0) < 0) { + /* No response means reset will happen shortly... */ + hlt(); + } + + /* If the ME responded it rejected the reset request */ + printk(BIOS_ERR, "ME: Global Reset failed\n"); + return -1; +} +#endif + +#ifdef __SMM__ +static void intel_me7_finalize_smm(void) +{ + struct me_hfs hfs; + u32 reg32; + + mei_base_address = + pcie_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf; + + /* S3 path will have hidden this device already */ + if (!mei_base_address || mei_base_address == 0xfffffff0) + return; + + /* Make sure ME is in a mode that expects EOP */ + reg32 = pcie_read_config32(PCH_ME_DEV, PCI_ME_HFS); + memcpy(&hfs, &reg32, sizeof(u32)); + + /* Abort and leave device alone if not normal mode */ + if (hfs.fpt_bad || + hfs.working_state != ME_HFS_CWS_NORMAL || + hfs.operation_mode != ME_HFS_MODE_NORMAL) + return; + + /* Try to send EOP command so ME stops accepting other commands */ + mkhi_end_of_post(); + + /* Make sure IO is disabled */ + reg32 = pcie_read_config32(PCH_ME_DEV, PCI_COMMAND); + reg32 &= ~(PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | PCI_COMMAND_IO); + pcie_write_config32(PCH_ME_DEV, PCI_COMMAND, reg32); + + /* Hide the PCI device */ + RCBA32_OR(FD2, PCH_DISABLE_MEI1); +} + +void intel_me_finalize_smm(void) +{ + u32 did = pcie_read_config32(PCH_ME_DEV, PCI_VENDOR_ID); + switch (did) { + case 0x1c3a8086: + intel_me7_finalize_smm(); + break; + case 0x1e3a8086: + intel_me8_finalize_smm(); + break; + default: + printk(BIOS_ERR, "No finalize handler for ME %08x.\n", did); + } +} +#else /* !__SMM__ */ + +/* Determine the path that we should take based on ME status */ +static me_bios_path intel_me_path(device_t dev) +{ + me_bios_path path = ME_DISABLE_BIOS_PATH; + struct me_hfs hfs; + struct me_gmes gmes; + +#if CONFIG_HAVE_ACPI_RESUME + /* S3 wake skips all MKHI messages */ + if (acpi_slp_type == 3) { + return ME_S3WAKE_BIOS_PATH; + } +#endif + + pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS); + pci_read_dword_ptr(dev, &gmes, PCI_ME_GMES); + + /* Check and dump status */ + intel_me_status(&hfs, &gmes); + + /* Check Current Working State */ + switch (hfs.working_state) { + case ME_HFS_CWS_NORMAL: + path = ME_NORMAL_BIOS_PATH; + break; + case ME_HFS_CWS_REC: + path = ME_RECOVERY_BIOS_PATH; + break; + default: + path = ME_DISABLE_BIOS_PATH; + break; + } + + /* Check Current Operation Mode */ + switch (hfs.operation_mode) { + case ME_HFS_MODE_NORMAL: + break; + case ME_HFS_MODE_DEBUG: + case ME_HFS_MODE_DIS: + case ME_HFS_MODE_OVER_JMPR: + case ME_HFS_MODE_OVER_MEI: + default: + path = ME_DISABLE_BIOS_PATH; + break; + } + + /* Check for any error code and valid firmware */ + if (hfs.error_code || hfs.fpt_bad) + path = ME_ERROR_BIOS_PATH; + +#if CONFIG_ELOG + if (path != ME_NORMAL_BIOS_PATH) { + struct elog_event_data_me_extended data = { + .current_working_state = hfs.working_state, + .operation_state = hfs.operation_state, + .operation_mode = hfs.operation_mode, + .error_code = hfs.error_code, + .progress_code = gmes.progress_code, + .current_pmevent = gmes.current_pmevent, + .current_state = gmes.current_state, + }; + elog_add_event_byte(ELOG_TYPE_MANAGEMENT_ENGINE, path); + elog_add_event_raw(ELOG_TYPE_MANAGEMENT_ENGINE_EXT, + &data, sizeof(data)); + } +#endif + + return path; +} + +/* Prepare ME for MEI messages */ +static int intel_mei_setup(device_t dev) +{ + struct resource *res; + struct mei_csr host; + u32 reg32; + + /* Find the MMIO base for the ME interface */ + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!res || res->base == 0 || res->size == 0) { + printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); + return -1; + } + mei_base_address = res->base; + + /* Ensure Memory and Bus Master bits are set */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Clean up status for next message */ + read_host_csr(&host); + host.interrupt_generate = 1; + host.ready = 1; + host.reset = 0; + write_host_csr(&host); + + return 0; +} + +/* Read the Extend register hash of ME firmware */ +static int intel_me_extend_valid(device_t dev) +{ + struct me_heres status; + u32 extend[8] = {0}; + int i, count = 0; + + pci_read_dword_ptr(dev, &status, PCI_ME_HERES); + if (!status.extend_feature_present) { + printk(BIOS_ERR, "ME: Extend Feature not present\n"); + return -1; + } + + if (!status.extend_reg_valid) { + printk(BIOS_ERR, "ME: Extend Register not valid\n"); + return -1; + } + + switch (status.extend_reg_algorithm) { + case PCI_ME_EXT_SHA1: + count = 5; + printk(BIOS_DEBUG, "ME: Extend SHA-1: "); + break; + case PCI_ME_EXT_SHA256: + count = 8; + printk(BIOS_DEBUG, "ME: Extend SHA-256: "); + break; + default: + printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n", + status.extend_reg_algorithm); + return -1; + } + + for (i = 0; i < count; ++i) { + extend[i] = pci_read_config32(dev, PCI_ME_HER(i)); + printk(BIOS_DEBUG, "%08x", extend[i]); + } + printk(BIOS_DEBUG, "\n"); + +#if CONFIG_CHROMEOS + /* Save hash in NVS for the OS to verify */ + chromeos_set_me_hash(extend, count); +#endif + + return 0; +} + +/* Hide the ME virtual PCI devices */ +static void intel_me_hide(device_t dev) +{ + dev->enabled = 0; + pch_enable(dev); +} + +/* Check whether ME is present and do basic init */ +static void intel_me_init(device_t dev) +{ + me_bios_path path = intel_me_path(dev); + + /* Do initial setup and determine the BIOS path */ + printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]); + + switch (path) { + case ME_S3WAKE_BIOS_PATH: + intel_me_hide(dev); + break; + + case ME_NORMAL_BIOS_PATH: + /* Validate the extend register */ + if (intel_me_extend_valid(dev) < 0) + break; /* TODO: force recovery mode */ + + /* Prepare MEI MMIO interface */ + if (intel_mei_setup(dev) < 0) + break; + +#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) + /* Print ME firmware version */ + mkhi_get_fw_version(); + /* Print ME firmware capabilities */ + mkhi_get_fwcaps(); +#endif + + /* + * Leave the ME unlocked in this path. + * It will be locked via SMI command later. + */ + break; + + case ME_ERROR_BIOS_PATH: + case ME_RECOVERY_BIOS_PATH: + case ME_DISABLE_BIOS_PATH: + case ME_FIRMWARE_UPDATE_BIOS_PATH: + break; + } +} + +static void set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations pci_ops = { + .set_subsystem = set_subsystem, +}; + +static struct device_operations device_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = intel_me_init, + .scan_bus = scan_static_bus, + .ops_pci = &pci_ops, +}; + +static const unsigned short pci_device_ids[] = { 0x1c3a, 0x2304, 0 }; + +static const struct pci_driver intel_me __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; + +#endif /* !__SMM__ */ diff --git a/src/southbridge/intel/fsp_bd82x6x/me.h b/src/southbridge/intel/fsp_bd82x6x/me.h new file mode 100644 index 0000000..aaeb24d --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/me.h @@ -0,0 +1,373 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _INTEL_ME_H +#define _INTEL_ME_H + +#define ME_RETRY 100000 /* 1 second */ +#define ME_DELAY 10 /* 10 us */ + +/* + * Management Engine PCI registers + */ + +#define PCI_CPU_DEVICE PCI_DEV(0,0,0) +#define PCI_CPU_MEBASE_L 0x70 /* Set by MRC */ +#define PCI_CPU_MEBASE_H 0x74 /* Set by MRC */ + +#define PCI_ME_HFS 0x40 +#define ME_HFS_CWS_RESET 0 +#define ME_HFS_CWS_INIT 1 +#define ME_HFS_CWS_REC 2 +#define ME_HFS_CWS_NORMAL 5 +#define ME_HFS_CWS_WAIT 6 +#define ME_HFS_CWS_TRANS 7 +#define ME_HFS_CWS_INVALID 8 +#define ME_HFS_STATE_PREBOOT 0 +#define ME_HFS_STATE_M0_UMA 1 +#define ME_HFS_STATE_M3 4 +#define ME_HFS_STATE_M0 5 +#define ME_HFS_STATE_BRINGUP 6 +#define ME_HFS_STATE_ERROR 7 +#define ME_HFS_ERROR_NONE 0 +#define ME_HFS_ERROR_UNCAT 1 +#define ME_HFS_ERROR_IMAGE 3 +#define ME_HFS_ERROR_DEBUG 4 +#define ME_HFS_MODE_NORMAL 0 +#define ME_HFS_MODE_DEBUG 2 +#define ME_HFS_MODE_DIS 3 +#define ME_HFS_MODE_OVER_JMPR 4 +#define ME_HFS_MODE_OVER_MEI 5 +#define ME_HFS_BIOS_DRAM_ACK 1 +#define ME_HFS_ACK_NO_DID 0 +#define ME_HFS_ACK_RESET 1 +#define ME_HFS_ACK_PWR_CYCLE 2 +#define ME_HFS_ACK_S3 3 +#define ME_HFS_ACK_S4 4 +#define ME_HFS_ACK_S5 5 +#define ME_HFS_ACK_GBL_RESET 6 +#define ME_HFS_ACK_CONTINUE 7 + +struct me_hfs { + u32 working_state: 4; + u32 mfg_mode: 1; + u32 fpt_bad: 1; + u32 operation_state: 3; + u32 fw_init_complete: 1; + u32 ft_bup_ld_flr: 1; + u32 update_in_progress: 1; + u32 error_code: 4; + u32 operation_mode: 4; + u32 reserved: 4; + u32 boot_options_present: 1; + u32 ack_data: 3; + u32 bios_msg_ack: 4; +} __attribute__ ((packed)); + +#define PCI_ME_UMA 0x44 + +struct me_uma { + u32 size: 6; + u32 reserved_1: 10; + u32 valid: 1; + u32 reserved_0: 14; + u32 set_to_one: 1; +} __attribute__ ((packed)); + +#define PCI_ME_H_GS 0x4c +#define ME_INIT_DONE 1 +#define ME_INIT_STATUS_SUCCESS 0 +#define ME_INIT_STATUS_NOMEM 1 +#define ME_INIT_STATUS_ERROR 2 + +struct me_did { + u32 uma_base: 16; + u32 reserved: 8; + u32 status: 4; + u32 init_done: 4; +} __attribute__ ((packed)); + +#define PCI_ME_GMES 0x48 +#define ME_GMES_PHASE_ROM 0 +#define ME_GMES_PHASE_BUP 1 +#define ME_GMES_PHASE_UKERNEL 2 +#define ME_GMES_PHASE_POLICY 3 +#define ME_GMES_PHASE_MODULE 4 +#define ME_GMES_PHASE_UNKNOWN 5 +#define ME_GMES_PHASE_HOST 6 + +struct me_gmes { + u32 bist_in_prog : 1; + u32 icc_prog_sts : 2; + u32 invoke_mebx : 1; + u32 cpu_replaced_sts : 1; + u32 mbp_rdy : 1; + u32 mfs_failure : 1; + u32 warm_rst_req_for_df : 1; + u32 cpu_replaced_valid : 1; + u32 reserved_1 : 2; + u32 fw_upd_ipu : 1; + u32 reserved_2 : 4; + u32 current_state: 8; + u32 current_pmevent: 4; + u32 progress_code: 4; +} __attribute__ ((packed)); + +#define PCI_ME_HERES 0xbc +#define PCI_ME_EXT_SHA1 0x00 +#define PCI_ME_EXT_SHA256 0x02 +#define PCI_ME_HER(x) (0xc0+(4*(x))) + +struct me_heres { + u32 extend_reg_algorithm: 4; + u32 reserved: 26; + u32 extend_feature_present: 1; + u32 extend_reg_valid: 1; +} __attribute__ ((packed)); + +/* + * Management Engine MEI registers + */ + +#define MEI_H_CB_WW 0x00 +#define MEI_H_CSR 0x04 +#define MEI_ME_CB_RW 0x08 +#define MEI_ME_CSR_HA 0x0c + +struct mei_csr { + u32 interrupt_enable: 1; + u32 interrupt_status: 1; + u32 interrupt_generate: 1; + u32 ready: 1; + u32 reset: 1; + u32 reserved: 3; + u32 buffer_read_ptr: 8; + u32 buffer_write_ptr: 8; + u32 buffer_depth: 8; +} __attribute__ ((packed)); + +#define MEI_ADDRESS_CORE 0x01 +#define MEI_ADDRESS_AMT 0x02 +#define MEI_ADDRESS_RESERVED 0x03 +#define MEI_ADDRESS_WDT 0x04 +#define MEI_ADDRESS_MKHI 0x07 +#define MEI_ADDRESS_ICC 0x08 +#define MEI_ADDRESS_THERMAL 0x09 + +#define MEI_HOST_ADDRESS 0 + +struct mei_header { + u32 client_address: 8; + u32 host_address: 8; + u32 length: 9; + u32 reserved: 6; + u32 is_complete: 1; +} __attribute__ ((packed)); + +#define MKHI_GROUP_ID_CBM 0x00 +#define MKHI_GROUP_ID_FWCAPS 0x03 +#define MKHI_GROUP_ID_MDES 0x08 +#define MKHI_GROUP_ID_GEN 0xff + +#define MKHI_GLOBAL_RESET 0x0b + +#define MKHI_FWCAPS_GET_RULE 0x02 + +#define MKHI_MDES_ENABLE 0x09 + +#define MKHI_GET_FW_VERSION 0x02 +#define MKHI_END_OF_POST 0x0c +#define MKHI_FEATURE_OVERRIDE 0x14 + +struct mkhi_header { + u32 group_id: 8; + u32 command: 7; + u32 is_response: 1; + u32 reserved: 8; + u32 result: 8; +} __attribute__ ((packed)); + +struct me_fw_version { + u16 code_minor; + u16 code_major; + u16 code_build_number; + u16 code_hot_fix; + u16 recovery_minor; + u16 recovery_major; + u16 recovery_build_number; + u16 recovery_hot_fix; +} __attribute__ ((packed)); + + +#define HECI_EOP_STATUS_SUCCESS 0x0 +#define HECI_EOP_PERFORM_GLOBAL_RESET 0x1 + +#define CBM_RR_GLOBAL_RESET 0x01 + +#define GLOBAL_RESET_BIOS_MRC 0x01 +#define GLOBAL_RESET_BIOS_POST 0x02 +#define GLOBAL_RESET_MEBX 0x03 + +struct me_global_reset { + u8 request_origin; + u8 reset_type; +} __attribute__ ((packed)); + +typedef enum { + ME_NORMAL_BIOS_PATH, + ME_S3WAKE_BIOS_PATH, + ME_ERROR_BIOS_PATH, + ME_RECOVERY_BIOS_PATH, + ME_DISABLE_BIOS_PATH, + ME_FIRMWARE_UPDATE_BIOS_PATH, +} me_bios_path; + +/* Defined in me_status.c for both romstage and ramstage */ +void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes); + +#ifdef __PRE_RAM__ +void intel_early_me_status(void); +int intel_early_me_init(void); +int intel_early_me_uma_size(void); +int intel_early_me_init_done(u8 status); +#endif + +#ifdef __SMM__ +void intel_me_finalize_smm(void); +void intel_me8_finalize_smm(void); +#endif +typedef struct { + u32 major_version : 16; + u32 minor_version : 16; + u32 hotfix_version : 16; + u32 build_version : 16; +} __attribute__ ((packed)) mbp_fw_version_name; + +typedef struct { + u8 num_icc_profiles; + u8 icc_profile_soft_strap; + u8 icc_profile_index; + u8 reserved; + u32 register_lock_mask[3]; +} __attribute__ ((packed)) mbp_icc_profile; + +typedef struct { + u32 full_net : 1; + u32 std_net : 1; + u32 manageability : 1; + u32 small_business : 1; + u32 l3manageability : 1; + u32 intel_at : 1; + u32 intel_cls : 1; + u32 reserved : 3; + u32 intel_mpc : 1; + u32 icc_over_clocking : 1; + u32 pavp : 1; + u32 reserved_1 : 4; + u32 ipv6 : 1; + u32 kvm : 1; + u32 och : 1; + u32 vlan : 1; + u32 tls : 1; + u32 reserved_4 : 1; + u32 wlan : 1; + u32 reserved_5 : 8; +} __attribute__ ((packed)) mefwcaps_sku; + +typedef struct { + u16 lock_state : 1; + u16 authenticate_module : 1; + u16 s3authentication : 1; + u16 flash_wear_out : 1; + u16 flash_variable_security : 1; + u16 wwan3gpresent : 1; + u16 wwan3goob : 1; + u16 reserved : 9; +} __attribute__ ((packed)) tdt_state_flag; + +typedef struct { + u8 state; + u8 last_theft_trigger; + tdt_state_flag flags; +} __attribute__ ((packed)) tdt_state_info; + +typedef struct { + u32 platform_target_usage_type : 4; + u32 platform_target_market_type : 2; + u32 super_sku : 1; + u32 reserved : 1; + u32 intel_me_fw_image_type : 4; + u32 platform_brand : 4; + u32 reserved_1 : 16; +} __attribute__ ((packed)) platform_type_rule_data; + +typedef struct { + mefwcaps_sku fw_capabilities; + u8 available; +} mbp_fw_caps; + +typedef struct { + u16 device_id; + u16 fuse_test_flags; + u32 umchid[4]; +} __attribute__ ((packed)) mbp_rom_bist_data; + +typedef struct { + u32 key[8]; +} mbp_platform_key; + +typedef struct { + platform_type_rule_data rule_data; + u8 available; +} mbp_plat_type; + +typedef struct { + mbp_fw_version_name fw_version_name; + mbp_fw_caps fw_caps_sku; + mbp_rom_bist_data rom_bist_data; + mbp_platform_key platform_key; + mbp_plat_type fw_plat_type; + mbp_icc_profile icc_profile; + tdt_state_info at_state; + u32 mfsintegrity; +} me_bios_payload; + +typedef struct { + u32 mbp_size : 8; + u32 num_entries : 8; + u32 rsvd : 16; +} __attribute__ ((packed)) mbp_header; + +typedef struct { + u32 app_id : 8; + u32 item_id : 8; + u32 length : 8; + u32 rsvd : 8; +} __attribute__ ((packed)) mbp_item_header; + +struct me_fwcaps { + u32 id; + u8 length; + mefwcaps_sku caps_sku; + u8 reserved[3]; +} __attribute__ ((packed)); + +#endif /* _INTEL_ME_H */ diff --git a/src/southbridge/intel/fsp_bd82x6x/me_8.x.c b/src/southbridge/intel/fsp_bd82x6x/me_8.x.c new file mode 100644 index 0000000..8e9a93a --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/me_8.x.c @@ -0,0 +1,933 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* + * This is a ramstage driver for the Intel Management Engine found in the + * 6-series chipset. It handles the required boot-time messages over the + * MMIO-based Management Engine Interface to tell the ME that the BIOS is + * finished with POST. Additional messages are defined for debug but are + * not used unless the console loglevel is high enough. + */ + +#include <arch/acpi.h> +#include <arch/hlt.h> +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <device/pci_def.h> +#include <string.h> +#include <delay.h> +#include <elog.h> + +#ifndef __SMM__ +# include <device/device.h> +# include <device/pci.h> +#endif + +#include "me.h" +#include "pch.h" + +#if CONFIG_CHROMEOS +#include <vendorcode/google/chromeos/chromeos.h> +#include <vendorcode/google/chromeos/gnvs.h> +#endif + +#ifndef __SMM__ +/* Path that the BIOS should take based on ME state */ +static const char *me_bios_path_values[] = { + [ME_NORMAL_BIOS_PATH] = "Normal", + [ME_S3WAKE_BIOS_PATH] = "S3 Wake", + [ME_ERROR_BIOS_PATH] = "Error", + [ME_RECOVERY_BIOS_PATH] = "Recovery", + [ME_DISABLE_BIOS_PATH] = "Disable", + [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update", +}; +static int intel_me_read_mbp(me_bios_payload *mbp_data); +#endif + +/* MMIO base address for MEI interface */ +static u32 mei_base_address; + +#if CONFIG_DEBUG_INTEL_ME +static void mei_dump(void *ptr, int dword, int offset, const char *type) +{ + struct mei_csr *csr; + + printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset); + + switch (offset) { + case MEI_H_CSR: + case MEI_ME_CSR_HA: + csr = ptr; + if (!csr) { + printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword); + break; + } + printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u " + "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth, + csr->buffer_read_ptr, csr->buffer_write_ptr, + csr->ready, csr->reset, csr->interrupt_generate, + csr->interrupt_status, csr->interrupt_enable); + break; + case MEI_ME_CB_RW: + case MEI_H_CB_WW: + printk(BIOS_SPEW, "CB: 0x%08x\n", dword); + break; + default: + printk(BIOS_SPEW, "0x%08x\n", offset); + break; + } +} +#else +# define mei_dump(ptr,dword,offset,type) do {} while (0) +#endif + +/* + * ME/MEI access helpers using memcpy to avoid aliasing. + */ + +static inline void mei_read_dword_ptr(void *ptr, int offset) +{ + u32 dword = read32(mei_base_address + offset); + memcpy(ptr, &dword, sizeof(dword)); + mei_dump(ptr, dword, offset, "READ"); +} + +static inline void mei_write_dword_ptr(void *ptr, int offset) +{ + u32 dword = 0; + memcpy(&dword, ptr, sizeof(dword)); + write32(mei_base_address + offset, dword); + mei_dump(ptr, dword, offset, "WRITE"); +} + +#ifndef __SMM__ +static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset) +{ + u32 dword = pci_read_config32(dev, offset); + memcpy(ptr, &dword, sizeof(dword)); + mei_dump(ptr, dword, offset, "PCI READ"); +} +#endif + +static inline void read_host_csr(struct mei_csr *csr) +{ + mei_read_dword_ptr(csr, MEI_H_CSR); +} + +static inline void write_host_csr(struct mei_csr *csr) +{ + mei_write_dword_ptr(csr, MEI_H_CSR); +} + +static inline void read_me_csr(struct mei_csr *csr) +{ + mei_read_dword_ptr(csr, MEI_ME_CSR_HA); +} + +static inline void write_cb(u32 dword) +{ + write32(mei_base_address + MEI_H_CB_WW, dword); + mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE"); +} + +static inline u32 read_cb(void) +{ + u32 dword = read32(mei_base_address + MEI_ME_CB_RW); + mei_dump(NULL, dword, MEI_ME_CB_RW, "READ"); + return dword; +} + +/* Wait for ME ready bit to be asserted */ +static int mei_wait_for_me_ready(void) +{ + struct mei_csr me; + unsigned try = ME_RETRY; + + while (try--) { + read_me_csr(&me); + if (me.ready) + return 0; + udelay(ME_DELAY); + } + + printk(BIOS_ERR, "ME: failed to become ready\n"); + return -1; +} + +static void mei_reset(void) +{ + struct mei_csr host; + + if (mei_wait_for_me_ready() < 0) + return; + + /* Reset host and ME circular buffers for next message */ + read_host_csr(&host); + host.reset = 1; + host.interrupt_generate = 1; + write_host_csr(&host); + + if (mei_wait_for_me_ready() < 0) + return; + + /* Re-init and indicate host is ready */ + read_host_csr(&host); + host.interrupt_generate = 1; + host.ready = 1; + host.reset = 0; + write_host_csr(&host); +} + +static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi, + void *req_data) +{ + struct mei_csr host; + unsigned ndata, n; + u32 *data; + + /* Number of dwords to write, ignoring MKHI */ + ndata = mei->length >> 2; + + /* Pad non-dword aligned request message length */ + if (mei->length & 3) + ndata++; + if (!ndata) { + printk(BIOS_DEBUG, "ME: request does not include MKHI\n"); + return -1; + } + ndata++; /* Add MEI header */ + + /* + * Make sure there is still room left in the circular buffer. + * Reset the buffer pointers if the requested message will not fit. + */ + read_host_csr(&host); + if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { + printk(BIOS_ERR, "ME: circular buffer full, resetting...\n"); + mei_reset(); + read_host_csr(&host); + } + + /* + * This implementation does not handle splitting large messages + * across multiple transactions. Ensure the requested length + * will fit in the available circular buffer depth. + */ + if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { + printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n", + ndata + 2, host.buffer_depth); + return -1; + } + + /* Write MEI header */ + mei_write_dword_ptr(mei, MEI_H_CB_WW); + ndata--; + + /* Write MKHI header */ + mei_write_dword_ptr(mkhi, MEI_H_CB_WW); + ndata--; + + /* Write message data */ + data = req_data; + for (n = 0; n < ndata; ++n) + write_cb(*data++); + + /* Generate interrupt to the ME */ + read_host_csr(&host); + host.interrupt_generate = 1; + write_host_csr(&host); + + /* Make sure ME is ready after sending request data */ + return mei_wait_for_me_ready(); +} + +static int mei_recv_msg(struct mkhi_header *mkhi, + void *rsp_data, int rsp_bytes) +{ + struct mei_header mei_rsp; + struct mkhi_header mkhi_rsp; + struct mei_csr me, host; + unsigned ndata, n/*, me_data_len*/; + unsigned expected; + u32 *data; + + /* Total number of dwords to read from circular buffer */ + expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2; + if (rsp_bytes & 3) + expected++; + + /* + * The interrupt status bit does not appear to indicate that the + * message has actually been received. Instead we wait until the + * expected number of dwords are present in the circular buffer. + */ + for (n = ME_RETRY; n; --n) { + read_me_csr(&me); + if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected) + break; + udelay(ME_DELAY); + } + if (!n) { + printk(BIOS_ERR, "ME: timeout waiting for data: expected " + "%u, available %u\n", expected, + me.buffer_write_ptr - me.buffer_read_ptr); + return -1; + } + + /* Read and verify MEI response header from the ME */ + mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW); + if (!mei_rsp.is_complete) { + printk(BIOS_ERR, "ME: response is not complete\n"); + return -1; + } + + /* Handle non-dword responses and expect at least MKHI header */ + ndata = mei_rsp.length >> 2; + if (mei_rsp.length & 3) + ndata++; + if (ndata != (expected - 1)) { + printk(BIOS_ERR, "ME: response is missing data %d != %d\n", + ndata, (expected - 1)); + return -1; + } + + /* Read and verify MKHI response header from the ME */ + mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW); + if (!mkhi_rsp.is_response || + mkhi->group_id != mkhi_rsp.group_id || + mkhi->command != mkhi_rsp.command) { + printk(BIOS_ERR, "ME: invalid response, group %u ?= %u," + "command %u ?= %u, is_response %u\n", mkhi->group_id, + mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command, + mkhi_rsp.is_response); + return -1; + } + ndata--; /* MKHI header has been read */ + + /* Make sure caller passed a buffer with enough space */ + if (ndata != (rsp_bytes >> 2)) { + printk(BIOS_ERR, "ME: not enough room in response buffer: " + "%u != %u\n", ndata, rsp_bytes >> 2); + return -1; + } + + /* Read response data from the circular buffer */ + data = rsp_data; + for (n = 0; n < ndata; ++n) + *data++ = read_cb(); + + /* Tell the ME that we have consumed the response */ + read_host_csr(&host); + host.interrupt_status = 1; + host.interrupt_generate = 1; + write_host_csr(&host); + + return mei_wait_for_me_ready(); +} + +static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi, + void *req_data, void *rsp_data, int rsp_bytes) +{ + if (mei_send_msg(mei, mkhi, req_data) < 0) + return -1; + if (mei_recv_msg(mkhi, rsp_data, rsp_bytes) < 0) + return -1; + return 0; +} + +#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) && !defined(__SMM__) +static inline void print_cap(const char *name, int state) +{ + printk(BIOS_DEBUG, "ME Capability: %-41s : %sabled\n", + name, state ? " en" : "dis"); +} + +static void me_print_fw_version(mbp_fw_version_name *vers_name) +{ + if (!vers_name->major_version) { + printk(BIOS_ERR, "ME: mbp missing version report\n"); + return; + } + + printk(BIOS_DEBUG, "ME: found version %d.%d.%d.%d\n", + vers_name->major_version, vers_name->minor_version, + vers_name->hotfix_version, vers_name->build_version); +} + +/* Get ME Firmware Capabilities */ +static int mkhi_get_fwcaps(mefwcaps_sku *cap) +{ + u32 rule_id = 0; + struct me_fwcaps cap_msg; + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_FWCAPS, + .command = MKHI_FWCAPS_GET_RULE, + }; + struct mei_header mei = { + .is_complete = 1, + .host_address = MEI_HOST_ADDRESS, + .client_address = MEI_ADDRESS_MKHI, + .length = sizeof(mkhi) + sizeof(rule_id), + }; + + /* Send request and wait for response */ + if (mei_sendrecv(&mei, &mkhi, &rule_id, &cap_msg, sizeof(cap_msg)) + < 0) { + printk(BIOS_ERR, "ME: GET FWCAPS message failed\n"); + return -1; + } + *cap = cap_msg.caps_sku; + return 0; +} + +/* Get ME Firmware Capabilities */ +static void me_print_fwcaps(mbp_fw_caps *caps_section) +{ + mefwcaps_sku *cap = &caps_section->fw_capabilities; + if (!caps_section->available) { + printk(BIOS_ERR, "ME: mbp missing fwcaps report\n"); + if (mkhi_get_fwcaps(cap)) + return; + } + + print_cap("Full Network manageability", cap->full_net); + print_cap("Regular Network manageability", cap->std_net); + print_cap("Manageability", cap->manageability); + print_cap("Small business technology", cap->small_business); + print_cap("Level III manageability", cap->l3manageability); + print_cap("IntelR Anti-Theft (AT)", cap->intel_at); + print_cap("IntelR Capability Licensing Service (CLS)", cap->intel_cls); + print_cap("IntelR Power Sharing Technology (MPC)", cap->intel_mpc); + print_cap("ICC Over Clocking", cap->icc_over_clocking); + print_cap("Protected Audio Video Path (PAVP)", cap->pavp); + print_cap("IPV6", cap->ipv6); + print_cap("KVM Remote Control (KVM)", cap->kvm); + print_cap("Outbreak Containment Heuristic (OCH)", cap->och); + print_cap("Virtual LAN (VLAN)", cap->vlan); + print_cap("TLS", cap->tls); + print_cap("Wireless LAN (WLAN)", cap->wlan); +} +#endif + +#if CONFIG_CHROMEOS && 0 /* DISABLED */ +/* Tell ME to issue a global reset */ +static int mkhi_global_reset(void) +{ + struct me_global_reset reset = { + .request_origin = GLOBAL_RESET_BIOS_POST, + .reset_type = CBM_RR_GLOBAL_RESET, + }; + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_CBM, + .command = MKHI_GLOBAL_RESET, + }; + struct mei_header mei = { + .is_complete = 1, + .length = sizeof(mkhi) + sizeof(reset), + .host_address = MEI_HOST_ADDRESS, + .client_address = MEI_ADDRESS_MKHI, + }; + + /* Send request and wait for response */ + printk(BIOS_NOTICE, "ME: %s\n", __FUNCTION__); + if (mei_sendrecv(&mei, &mkhi, &reset, NULL, 0) < 0) { + /* No response means reset will happen shortly... */ + hlt(); + } + + /* If the ME responded it rejected the reset request */ + printk(BIOS_ERR, "ME: Global Reset failed\n"); + return -1; +} +#endif + +#ifdef __SMM__ + +/* Send END OF POST message to the ME */ +static int mkhi_end_of_post(void) +{ + struct mkhi_header mkhi = { + .group_id = MKHI_GROUP_ID_GEN, + .command = MKHI_END_OF_POST, + }; + struct mei_header mei = { + .is_complete = 1, + .host_address = MEI_HOST_ADDRESS, + .client_address = MEI_ADDRESS_MKHI, + .length = sizeof(mkhi), + }; + + u32 eop_ack; + + /* Send request and wait for response */ + printk(BIOS_NOTICE, "ME: %s\n", __FUNCTION__); + if (mei_sendrecv(&mei, &mkhi, NULL, &eop_ack, sizeof(eop_ack)) < 0) { + printk(BIOS_ERR, "ME: END OF POST message failed\n"); + return -1; + } + + printk(BIOS_INFO, "ME: END OF POST message successful (%d)\n", eop_ack); + return 0; +} + +void intel_me8_finalize_smm(void) +{ + struct me_hfs hfs; + u32 reg32; + + mei_base_address = + pcie_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf; + + /* S3 path will have hidden this device already */ + if (!mei_base_address || mei_base_address == 0xfffffff0) + return; + + /* Make sure ME is in a mode that expects EOP */ + reg32 = pcie_read_config32(PCH_ME_DEV, PCI_ME_HFS); + memcpy(&hfs, &reg32, sizeof(u32)); + + /* Abort and leave device alone if not normal mode */ + if (hfs.fpt_bad || + hfs.working_state != ME_HFS_CWS_NORMAL || + hfs.operation_mode != ME_HFS_MODE_NORMAL) + return; + + /* Try to send EOP command so ME stops accepting other commands */ + mkhi_end_of_post(); + + /* Make sure IO is disabled */ + reg32 = pcie_read_config32(PCH_ME_DEV, PCI_COMMAND); + reg32 &= ~(PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | PCI_COMMAND_IO); + pcie_write_config32(PCH_ME_DEV, PCI_COMMAND, reg32); + + /* Hide the PCI device */ + RCBA32_OR(FD2, PCH_DISABLE_MEI1); +} + +#else /* !__SMM__ */ + +/* Determine the path that we should take based on ME status */ +static me_bios_path intel_me_path(device_t dev) +{ + me_bios_path path = ME_DISABLE_BIOS_PATH; + struct me_hfs hfs; + struct me_gmes gmes; + +#if CONFIG_HAVE_ACPI_RESUME + /* S3 wake skips all MKHI messages */ + if (acpi_slp_type == 3) { + return ME_S3WAKE_BIOS_PATH; + } +#endif + + pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS); + pci_read_dword_ptr(dev, &gmes, PCI_ME_GMES); + + /* Check and dump status */ + intel_me_status(&hfs, &gmes); + + /* Check Current Working State */ + switch (hfs.working_state) { + case ME_HFS_CWS_NORMAL: + path = ME_NORMAL_BIOS_PATH; + break; + case ME_HFS_CWS_REC: + path = ME_RECOVERY_BIOS_PATH; + break; + default: + path = ME_DISABLE_BIOS_PATH; + break; + } + + /* Check Current Operation Mode */ + switch (hfs.operation_mode) { + case ME_HFS_MODE_NORMAL: + break; + case ME_HFS_MODE_DEBUG: + case ME_HFS_MODE_DIS: + case ME_HFS_MODE_OVER_JMPR: + case ME_HFS_MODE_OVER_MEI: + default: + path = ME_DISABLE_BIOS_PATH; + break; + } + + /* Check for any error code and valid firmware and MBP */ + if (hfs.error_code || hfs.fpt_bad) + path = ME_ERROR_BIOS_PATH; + + /* Check if the MBP is ready */ + if (!gmes.mbp_rdy) { + printk(BIOS_CRIT, "%s: mbp is not ready!\n", + __FUNCTION__); + path = ME_ERROR_BIOS_PATH; + } + +#if CONFIG_ELOG + if (path != ME_NORMAL_BIOS_PATH) { + struct elog_event_data_me_extended data = { + .current_working_state = hfs.working_state, + .operation_state = hfs.operation_state, + .operation_mode = hfs.operation_mode, + .error_code = hfs.error_code, + .progress_code = gmes.progress_code, + .current_pmevent = gmes.current_pmevent, + .current_state = gmes.current_state, + }; + elog_add_event_byte(ELOG_TYPE_MANAGEMENT_ENGINE, path); + elog_add_event_raw(ELOG_TYPE_MANAGEMENT_ENGINE_EXT, + &data, sizeof(data)); + } +#endif + + return path; +} + +/* Prepare ME for MEI messages */ +static int intel_mei_setup(device_t dev) +{ + struct resource *res; + struct mei_csr host; + u32 reg32; + + /* Find the MMIO base for the ME interface */ + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!res || res->base == 0 || res->size == 0) { + printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); + return -1; + } + mei_base_address = res->base; + + /* Ensure Memory and Bus Master bits are set */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Clean up status for next message */ + read_host_csr(&host); + host.interrupt_generate = 1; + host.ready = 1; + host.reset = 0; + write_host_csr(&host); + + return 0; +} + +/* Read the Extend register hash of ME firmware */ +static int intel_me_extend_valid(device_t dev) +{ + struct me_heres status; + u32 extend[8] = {0}; + int i, count = 0; + + pci_read_dword_ptr(dev, &status, PCI_ME_HERES); + if (!status.extend_feature_present) { + printk(BIOS_ERR, "ME: Extend Feature not present\n"); + return -1; + } + + if (!status.extend_reg_valid) { + printk(BIOS_ERR, "ME: Extend Register not valid\n"); + return -1; + } + + switch (status.extend_reg_algorithm) { + case PCI_ME_EXT_SHA1: + count = 5; + printk(BIOS_DEBUG, "ME: Extend SHA-1: "); + break; + case PCI_ME_EXT_SHA256: + count = 8; + printk(BIOS_DEBUG, "ME: Extend SHA-256: "); + break; + default: + printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n", + status.extend_reg_algorithm); + return -1; + } + + for (i = 0; i < count; ++i) { + extend[i] = pci_read_config32(dev, PCI_ME_HER(i)); + printk(BIOS_DEBUG, "%08x", extend[i]); + } + printk(BIOS_DEBUG, "\n"); + +#if CONFIG_CHROMEOS + /* Save hash in NVS for the OS to verify */ + chromeos_set_me_hash(extend, count); +#endif + + return 0; +} + +/* Hide the ME virtual PCI devices */ +static void intel_me_hide(device_t dev) +{ + dev->enabled = 0; + pch_enable(dev); +} + +/* Check whether ME is present and do basic init */ +static void intel_me_init(device_t dev) +{ + me_bios_path path = intel_me_path(dev); + me_bios_payload mbp_data; + + /* Do initial setup and determine the BIOS path */ + printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]); + + switch (path) { + case ME_S3WAKE_BIOS_PATH: + intel_me_hide(dev); + break; + + case ME_NORMAL_BIOS_PATH: + /* Validate the extend register */ + if (intel_me_extend_valid(dev) < 0) + break; /* TODO: force recovery mode */ + + /* Prepare MEI MMIO interface */ + if (intel_mei_setup(dev) < 0) + break; + + if(intel_me_read_mbp(&mbp_data)) + break; + +#if CONFIG_CHROMEOS && 0 /* DISABLED */ + /* + * Unlock ME in recovery mode. + */ + if (recovery_mode_enabled()) { + /* Unlock ME flash region */ + mkhi_hmrfpo_enable(); + + /* Issue global reset */ + mkhi_global_reset(); + return; + } +#endif + +#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) + me_print_fw_version(&mbp_data.fw_version_name); + me_print_fwcaps(&mbp_data.fw_caps_sku); +#endif + + /* + * Leave the ME unlocked in this path. + * It will be locked via SMI command later. + */ + break; + + case ME_ERROR_BIOS_PATH: + case ME_RECOVERY_BIOS_PATH: + case ME_DISABLE_BIOS_PATH: + case ME_FIRMWARE_UPDATE_BIOS_PATH: + break; + } +} + +static void set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations pci_ops = { + .set_subsystem = set_subsystem, +}; + +static struct device_operations device_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = intel_me_init, + .scan_bus = scan_static_bus, + .ops_pci = &pci_ops, +}; + +static const struct pci_driver intel_me __pci_driver = { + .ops = &device_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x1e3a, +}; + +/****************************************************************************** + * */ +static u32 me_to_host_words_pending(void) +{ + struct mei_csr me; + read_me_csr(&me); + if (!me.ready) + return 0; + return (me.buffer_write_ptr - me.buffer_read_ptr) & + (me.buffer_depth - 1); +} + +#if 0 +/* This function is not yet being used, keep it in for the future. */ +static u32 host_to_me_words_room(void) +{ + struct mei_csr csr; + + read_me_csr(&csr); + if (!csr.ready) + return 0; + + read_host_csr(&csr); + return (csr.buffer_read_ptr - csr.buffer_write_ptr - 1) & + (csr.buffer_depth - 1); +} +#endif +/* + * mbp seems to be following its own flow, let's retrieve it in a dedicated + * function. + */ +static int intel_me_read_mbp(me_bios_payload *mbp_data) +{ + mbp_header mbp_hdr; + mbp_item_header mbp_item_hdr; + u32 me2host_pending; + u32 mbp_item_id; + struct mei_csr host; + + me2host_pending = me_to_host_words_pending(); + if (!me2host_pending) { + printk(BIOS_ERR, "ME: no mbp data!\n"); + return -1; + } + + /* we know for sure that at least the header is there */ + mei_read_dword_ptr(&mbp_hdr, MEI_ME_CB_RW); + + if ((mbp_hdr.num_entries > (mbp_hdr.mbp_size / 2)) || + (me2host_pending < mbp_hdr.mbp_size)) { + printk(BIOS_ERR, "ME: mbp of %d entries, total size %d words" + " buffer contains %d words\n", + mbp_hdr.num_entries, mbp_hdr.mbp_size, + me2host_pending); + return -1; + } + + me2host_pending--; + memset(mbp_data, 0, sizeof(*mbp_data)); + + while (mbp_hdr.num_entries--) { + u32* copy_addr; + u32 copy_size, buffer_room; + void *p; + + if (!me2host_pending) { + printk(BIOS_ERR, "ME: no mbp data %d entries to go!\n", + mbp_hdr.num_entries + 1); + return -1; + } + + mei_read_dword_ptr(&mbp_item_hdr, MEI_ME_CB_RW); + + if (mbp_item_hdr.length > me2host_pending) { + printk(BIOS_ERR, "ME: insufficient mbp data %d " + "entries to go!\n", + mbp_hdr.num_entries + 1); + return -1; + } + + me2host_pending -= mbp_item_hdr.length; + + mbp_item_id = (((u32)mbp_item_hdr.item_id) << 8) + + mbp_item_hdr.app_id; + + copy_size = mbp_item_hdr.length - 1; + +#define SET_UP_COPY(field) { copy_addr = (u32 *)&mbp_data->field; \ + buffer_room = sizeof(mbp_data->field) / sizeof(u32); \ + break; \ + } + + p = &mbp_item_hdr; + printk(BIOS_INFO, "ME: MBP item header %8.8x\n", *((u32*)p)); + + switch(mbp_item_id) { + case 0x101: + SET_UP_COPY(fw_version_name); + + case 0x102: + SET_UP_COPY(icc_profile); + + case 0x103: + SET_UP_COPY(at_state); + + case 0x201: + mbp_data->fw_caps_sku.available = 1; + SET_UP_COPY(fw_caps_sku.fw_capabilities); + + case 0x301: + SET_UP_COPY(rom_bist_data); + + case 0x401: + SET_UP_COPY(platform_key); + + case 0x501: + mbp_data->fw_plat_type.available = 1; + SET_UP_COPY(fw_plat_type.rule_data); + + case 0x601: + SET_UP_COPY(mfsintegrity); + + default: + printk(BIOS_ERR, "ME: unknown mbp item id 0x%x!!!\n", + mbp_item_id); + return -1; + } + + if (buffer_room != copy_size) { + printk(BIOS_ERR, "ME: buffer room %d != %d copy size" + " for item 0x%x!!!\n", + buffer_room, copy_size, mbp_item_id); + return -1; + } + while(copy_size--) + *copy_addr++ = read_cb(); + } + + read_host_csr(&host); + host.interrupt_generate = 1; + write_host_csr(&host); + + { + int cntr = 0; + while(host.interrupt_generate) { + read_host_csr(&host); + cntr++; + } + printk(BIOS_SPEW, "ME: mbp read OK after %d cycles\n", cntr); + } + + return 0; +} + +#endif /* !__SMM__ */ diff --git a/src/southbridge/intel/fsp_bd82x6x/me_status.c b/src/southbridge/intel/fsp_bd82x6x/me_status.c new file mode 100644 index 0000000..b2f38d6 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/me_status.c @@ -0,0 +1,213 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <stdlib.h> +#include <console/console.h> +#include "me.h" + +#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) +/* HFS1[3:0] Current Working State Values */ +static const char *me_cws_values[] = { + [ME_HFS_CWS_RESET] = "Reset", + [ME_HFS_CWS_INIT] = "Initializing", + [ME_HFS_CWS_REC] = "Recovery", + [ME_HFS_CWS_NORMAL] = "Normal", + [ME_HFS_CWS_WAIT] = "Platform Disable Wait", + [ME_HFS_CWS_TRANS] = "OP State Transition", + [ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In" +}; + +/* HFS1[8:6] Current Operation State Values */ +static const char *me_opstate_values[] = { + [ME_HFS_STATE_PREBOOT] = "Preboot", + [ME_HFS_STATE_M0_UMA] = "M0 with UMA", + [ME_HFS_STATE_M3] = "M3 without UMA", + [ME_HFS_STATE_M0] = "M0 without UMA", + [ME_HFS_STATE_BRINGUP] = "Bring up", + [ME_HFS_STATE_ERROR] = "M0 without UMA but with error" +}; + +/* HFS[19:16] Current Operation Mode Values */ +static const char *me_opmode_values[] = { + [ME_HFS_MODE_NORMAL] = "Normal", + [ME_HFS_MODE_DEBUG] = "Debug", + [ME_HFS_MODE_DIS] = "Soft Temporary Disable", + [ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper", + [ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message" +}; + +/* HFS[15:12] Error Code Values */ +static const char *me_error_values[] = { + [ME_HFS_ERROR_NONE] = "No Error", + [ME_HFS_ERROR_UNCAT] = "Uncategorized Failure", + [ME_HFS_ERROR_IMAGE] = "Image Failure", + [ME_HFS_ERROR_DEBUG] = "Debug Failure" +}; + +/* GMES[31:28] ME Progress Code */ +static const char *me_progress_values[] = { + [ME_GMES_PHASE_ROM] = "ROM Phase", + [ME_GMES_PHASE_BUP] = "BUP Phase", + [ME_GMES_PHASE_UKERNEL] = "uKernel Phase", + [ME_GMES_PHASE_POLICY] = "Policy Module", + [ME_GMES_PHASE_MODULE] = "Module Loading", + [ME_GMES_PHASE_UNKNOWN] = "Unknown", + [ME_GMES_PHASE_HOST] = "Host Communication" +}; + +/* GMES[27:24] Power Management Event */ +static const char *me_pmevent_values[] = { + [0x00] = "Clean Moff->Mx wake", + [0x01] = "Moff->Mx wake after an error", + [0x02] = "Clean global reset", + [0x03] = "Global reset after an error", + [0x04] = "Clean Intel ME reset", + [0x05] = "Intel ME reset due to exception", + [0x06] = "Pseudo-global reset", + [0x07] = "S0/M0->Sx/M3", + [0x08] = "Sx/M3->S0/M0", + [0x09] = "Non-power cycle reset", + [0x0a] = "Power cycle reset through M3", + [0x0b] = "Power cycle reset through Moff", + [0x0c] = "Sx/Mx->Sx/Moff" +}; + +/* Progress Code 0 states */ +static const char *me_progress_rom_values[] = { + [0x00] = "BEGIN", + [0x06] = "DISABLE" +}; + +/* Progress Code 1 states */ +static const char *me_progress_bup_values[] = { + [0x00] = "Initialization starts", + [0x01] = "Disable the host wake event", + [0x04] = "Flow determination start process", + [0x08] = "Error reading/matching the VSCC table in the descriptor", + [0x0a] = "Check to see if straps say ME DISABLED", + [0x0b] = "Timeout waiting for PWROK", + [0x0d] = "Possibly handle BUP manufacturing override strap", + [0x11] = "Bringup in M3", + [0x12] = "Bringup in M0", + [0x13] = "Flow detection error", + [0x15] = "M3 clock switching error", + [0x18] = "M3 kernel load", + [0x1c] = "T34 missing - cannot program ICC", + [0x1f] = "Waiting for DID BIOS message", + [0x20] = "Waiting for DID BIOS message failure", + [0x21] = "DID reported an error", + [0x22] = "Enabling UMA", + [0x23] = "Enabling UMA error", + [0x24] = "Sending DID Ack to BIOS", + [0x25] = "Sending DID Ack to BIOS error", + [0x26] = "Switching clocks in M0", + [0x27] = "Switching clocks in M0 error", + [0x28] = "ME in temp disable", + [0x32] = "M0 kernel load", +}; + +/* Progress Code 3 states */ +static const char *me_progress_policy_values[] = { + [0x00] = "Entery into Policy Module", + [0x03] = "Received S3 entry", + [0x04] = "Received S4 entry", + [0x05] = "Received S5 entry", + [0x06] = "Received UPD entry", + [0x07] = "Received PCR entry", + [0x08] = "Received NPCR entry", + [0x09] = "Received host wake", + [0x0a] = "Received AC<>DC switch", + [0x0b] = "Received DRAM Init Done", + [0x0c] = "VSCC Data not found for flash device", + [0x0d] = "VSCC Table is not valid", + [0x0e] = "Flash Partition Boundary is outside address space", + [0x0f] = "ME cannot access the chipset descriptor region", + [0x10] = "Required VSCC values for flash parts do not match", +}; +#endif + +void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes) +{ +#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) + /* Check Current States */ + printk(BIOS_DEBUG, "ME: FW Partition Table : %s\n", + hfs->fpt_bad ? "BAD" : "OK"); + printk(BIOS_DEBUG, "ME: Bringup Loader Failure : %s\n", + hfs->ft_bup_ld_flr ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Firmware Init Complete : %s\n", + hfs->fw_init_complete ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Manufacturing Mode : %s\n", + hfs->mfg_mode ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Boot Options Present : %s\n", + hfs->boot_options_present ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Update In Progress : %s\n", + hfs->update_in_progress ? "YES" : "NO"); + printk(BIOS_DEBUG, "ME: Current Working State : %s\n", + me_cws_values[hfs->working_state]); + printk(BIOS_DEBUG, "ME: Current Operation State : %s\n", + me_opstate_values[hfs->operation_state]); + printk(BIOS_DEBUG, "ME: Current Operation Mode : %s\n", + me_opmode_values[hfs->operation_mode]); + printk(BIOS_DEBUG, "ME: Error Code : %s\n", + me_error_values[hfs->error_code]); + printk(BIOS_DEBUG, "ME: Progress Phase : %s\n", + me_progress_values[gmes->progress_code]); + printk(BIOS_DEBUG, "ME: Power Management Event : %s\n", + me_pmevent_values[gmes->current_pmevent]); + + printk(BIOS_DEBUG, "ME: Progress Phase State : "); + switch (gmes->progress_code) { + case ME_GMES_PHASE_ROM: /* ROM Phase */ + printk(BIOS_DEBUG, "%s", + me_progress_rom_values[gmes->current_state]); + break; + + case ME_GMES_PHASE_BUP: /* Bringup Phase */ + if (gmes->current_state < ARRAY_SIZE(me_progress_bup_values) + && me_progress_bup_values[gmes->current_state]) + printk(BIOS_DEBUG, "%s", + me_progress_bup_values[gmes->current_state]); + else + printk(BIOS_DEBUG, "0x%02x", gmes->current_state); + break; + + case ME_GMES_PHASE_POLICY: /* Policy Module Phase */ + if (gmes->current_state < ARRAY_SIZE(me_progress_policy_values) + && me_progress_policy_values[gmes->current_state]) + printk(BIOS_DEBUG, "%s", + me_progress_policy_values[gmes->current_state]); + else + printk(BIOS_DEBUG, "0x%02x", gmes->current_state); + break; + + case ME_GMES_PHASE_HOST: /* Host Communication Phase */ + if (!gmes->current_state) + printk(BIOS_DEBUG, "Host communication established"); + else + printk(BIOS_DEBUG, "0x%02x", gmes->current_state); + break; + + default: + printk(BIOS_DEBUG, "Unknown 0x%02x", gmes->current_state); + } + printk(BIOS_DEBUG, "\n"); +#endif +} diff --git a/src/southbridge/intel/fsp_bd82x6x/nvs.h b/src/southbridge/intel/fsp_bd82x6x/nvs.h new file mode 100644 index 0000000..b8506d4 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/nvs.h @@ -0,0 +1,158 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2011 Google Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "vendorcode/google/chromeos/gnvs.h" +typedef struct { + /* Miscellaneous */ + u16 osys; /* 0x00 - Operating System */ + u8 smif; /* 0x02 - SMI function call ("TRAP") */ + u8 prm0; /* 0x03 - SMI function call parameter */ + u8 prm1; /* 0x04 - SMI function call parameter */ + u8 scif; /* 0x05 - SCI function call (via _L00) */ + u8 prm2; /* 0x06 - SCI function call parameter */ + u8 prm3; /* 0x07 - SCI function call parameter */ + u8 lckf; /* 0x08 - Global Lock function for EC */ + u8 prm4; /* 0x09 - Lock function parameter */ + u8 prm5; /* 0x0a - Lock function parameter */ + u32 p80d; /* 0x0b - Debug port (IO 0x80) value */ + u8 lids; /* 0x0f - LID state (open = 1) */ + u8 pwrs; /* 0x10 - Power state (AC = 1) */ + /* Thermal policy */ + u8 tlvl; /* 0x11 - Throttle Level Limit */ + u8 flvl; /* 0x12 - Current FAN Level */ + u8 tcrt; /* 0x13 - Critical Threshold */ + u8 tpsv; /* 0x14 - Passive Threshold */ + u8 tmax; /* 0x15 - CPU Tj_max */ + u8 f0of; /* 0x16 - FAN 0 OFF Threshold */ + u8 f0on; /* 0x17 - FAN 0 ON Threshold */ + u8 f0pw; /* 0x18 - FAN 0 PWM value */ + u8 f1of; /* 0x19 - FAN 1 OFF Threshold */ + u8 f1on; /* 0x1a - FAN 1 ON Threshold */ + u8 f1pw; /* 0x1b - FAN 1 PWM value */ + u8 f2of; /* 0x1c - FAN 2 OFF Threshold */ + u8 f2on; /* 0x1d - FAN 2 ON Threshold */ + u8 f2pw; /* 0x1e - FAN 2 PWM value */ + u8 f3of; /* 0x1f - FAN 3 OFF Threshold */ + u8 f3on; /* 0x20 - FAN 3 ON Threshold */ + u8 f3pw; /* 0x21 - FAN 3 PWM value */ + u8 f4of; /* 0x22 - FAN 4 OFF Threshold */ + u8 f4on; /* 0x23 - FAN 4 ON Threshold */ + u8 f4pw; /* 0x24 - FAN 4 PWM value */ + u8 tmps; /* 0x25 - Temperature Sensor ID */ + u8 rsvd3[2]; + /* Processor Identification */ + u8 apic; /* 0x28 - APIC enabled */ + u8 mpen; /* 0x29 - MP capable/enabled */ + u8 pcp0; /* 0x2a - PDC CPU/CORE 0 */ + u8 pcp1; /* 0x2b - PDC CPU/CORE 1 */ + u8 ppcm; /* 0x2c - Max. PPC state */ + u8 pcnt; /* 0x2d - Processor Count */ + u8 rsvd4[4]; + /* Super I/O & CMOS config */ + u8 natp; /* 0x32 - SIO type */ + u8 s5u0; /* 0x33 - Enable USB0 in S5 */ + u8 s5u1; /* 0x34 - Enable USB1 in S5 */ + u8 s3u0; /* 0x35 - Enable USB0 in S3 */ + u8 s3u1; /* 0x36 - Enable USB1 in S3 */ + u8 s33g; /* 0x37 - Enable S3 in 3G */ + u32 cmem; /* 0x38 - CBMEM TOC */ + /* Integrated Graphics Device */ + u8 igds; /* 0x3c - IGD state */ + u8 tlst; /* 0x3d - Display Toggle List Pointer */ + u8 cadl; /* 0x3e - currently attached devices */ + u8 padl; /* 0x3f - previously attached devices */ + u16 cste; /* 0x40 - current display state */ + u16 nste; /* 0x42 - next display state */ + u16 sste; /* 0x44 - set display state */ + u8 ndid; /* 0x46 - number of device ids */ + u32 did[5]; /* 0x47 - 5b device id 1..5 */ + u8 rsvd5[0x9]; + /* Backlight Control */ + u8 blcs; /* 0x64 - Backlight Control possible */ + u8 brtl; + u8 odds; + u8 rsvd6[0x7]; + /* Ambient Light Sensors*/ + u8 alse; /* 0x6e - ALS enable */ + u8 alaf; + u8 llow; + u8 lhih; + u8 rsvd7[0x6]; + /* Extended Mobile Access */ + u8 emae; /* 0x78 - EMA enable */ + u16 emap; /* 0x79 - EMA pointer */ + u16 emal; /* 0x7a - EMA Length */ + u8 rsvd8[0x5]; + /* MEF */ + u8 mefe; /* 0x82 - MEF enable */ + u8 rsvd9[0x9]; + /* TPM support */ + u8 tpmp; /* 0x8c - TPM */ + u8 tpme; + u8 rsvd10[8]; + /* SATA */ + u8 gtf0[7]; /* 0x96 - GTF task file buffer for port 0 */ + u8 gtf1[7]; + u8 gtf2[7]; + u8 idem; + u8 idet; + u8 rsvd11[7]; + /* IGD OpRegion (not implemented yet) */ + u32 aslb; /* 0xb4 - IGD OpRegion Base Address */ + u8 ibtt; /* 0xb8 - IGD boot type */ + u8 ipat; /* 0xb9 - IGD panel type */ + u8 itvf; /* 0xba - IGD TV format */ + u8 itvm; /* 0xbb - IGD TV minor format */ + u8 ipsc; /* 0xbc - IGD Panel Scaling */ + u8 iblc; /* 0xbd - IGD BLC configuration */ + u8 ibia; /* 0xbe - IGD BIA configuration */ + u8 issc; /* 0xbf - IGD SSC configuration */ + u8 i409; /* 0xc0 - IGD 0409 modified settings */ + u8 i509; /* 0xc1 - IGD 0509 modified settings */ + u8 i609; /* 0xc2 - IGD 0609 modified settings */ + u8 i709; /* 0xc3 - IGD 0709 modified settings */ + u8 idmm; /* 0xc4 - IGD Power Conservation */ + u8 idms; /* 0xc5 - IGD DVMT memory size */ + u8 if1e; /* 0xc6 - IGD Function 1 Enable */ + u8 hvco; /* 0xc7 - IGD HPLL VCO */ + u32 nxd[8]; /* 0xc8 - IGD next state DIDx for _DGS */ + u8 isci; /* 0xe8 - IGD SMI/SCI mode (0: SCI) */ + u8 pavp; /* 0xe9 - IGD PAVP data */ + u8 rsvd12; /* 0xea - rsvd */ + u8 oscc; /* 0xeb - PCIe OSC control */ + u8 npce; /* 0xec - native pcie support */ + u8 plfl; /* 0xed - platform flavor */ + u8 brev; /* 0xee - board revision */ + u8 dpbm; /* 0xef - digital port b mode */ + u8 dpcm; /* 0xf0 - digital port c mode */ + u8 dpdm; /* 0xf1 - digital port c mode */ + u8 alfp; /* 0xf2 - active lfp */ + u8 imon; /* 0xf3 - current graphics turbo imon value */ + u8 mmio; /* 0xf4 - 64bit mmio support */ + u8 rsvd13[11]; /* 0xf5 - rsvd */ + + /* ChromeOS specific (starts at 0x100)*/ + chromeos_acpi_t chromeos; +} __attribute__((packed)) global_nvs_t; + +#ifdef __SMM__ +/* Used in SMM to find the ACPI GNVS address */ +global_nvs_t *smm_get_gnvs(void); +#endif diff --git a/src/southbridge/intel/fsp_bd82x6x/pch.c b/src/southbridge/intel/fsp_bd82x6x/pch.c new file mode 100644 index 0000000..8c026be --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/pch.c @@ -0,0 +1,410 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <device/pci.h> +#include "pch.h" + +static int pch_revision_id = -1; +static int pch_type = -1; + +int pch_silicon_revision(void) +{ + if (pch_revision_id < 0) + pch_revision_id = pci_read_config8( + dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + PCI_REVISION_ID); + return pch_revision_id; +} + +int pch_silicon_type(void) +{ + if (pch_type < 0) + pch_type = pci_read_config8( + dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + PCI_DEVICE_ID + 1); + return pch_type; +} + +int pch_silicon_supported(int type, int rev) +{ + int cur_type = pch_silicon_type(); + int cur_rev = pch_silicon_revision(); + + switch (type) { + case PCH_TYPE_CPT: + /* CougarPoint minimum revision */ + if (cur_type == PCH_TYPE_CPT && cur_rev >= rev) + return 1; + /* PantherPoint any revision */ + if (cur_type == PCH_TYPE_PPT) + return 1; + break; + + case PCH_TYPE_PPT: + /* PantherPoint minimum revision */ + if (cur_type == PCH_TYPE_PPT && cur_rev >= rev) + return 1; + break; + } + + return 0; +} + +/* Set bit in Function Disble register to hide this device */ +static void pch_hide_devfn(unsigned devfn) +{ + switch (devfn) { + case PCI_DEVFN(22, 0): /* MEI #1 */ + RCBA32_OR(FD2, PCH_DISABLE_MEI1); + break; + case PCI_DEVFN(22, 1): /* MEI #2 */ + RCBA32_OR(FD2, PCH_DISABLE_MEI2); + break; + case PCI_DEVFN(22, 2): /* IDE-R */ + RCBA32_OR(FD2, PCH_DISABLE_IDER); + break; + case PCI_DEVFN(22, 3): /* KT */ + RCBA32_OR(FD2, PCH_DISABLE_KT); + break; + case PCI_DEVFN(25, 0): /* Gigabit Ethernet */ + RCBA32_OR(BUC, PCH_DISABLE_GBE); + break; + case PCI_DEVFN(26, 0): /* EHCI #2 */ + RCBA32_OR(FD, PCH_DISABLE_EHCI2); + break; + case PCI_DEVFN(27, 0): /* HD Audio Controller */ + RCBA32_OR(FD, PCH_DISABLE_HD_AUDIO); + break; + case PCI_DEVFN(28, 0): /* PCI Express Root Port 1 */ + case PCI_DEVFN(28, 1): /* PCI Express Root Port 2 */ + case PCI_DEVFN(28, 2): /* PCI Express Root Port 3 */ + case PCI_DEVFN(28, 3): /* PCI Express Root Port 4 */ + case PCI_DEVFN(28, 4): /* PCI Express Root Port 5 */ + case PCI_DEVFN(28, 5): /* PCI Express Root Port 6 */ + case PCI_DEVFN(28, 6): /* PCI Express Root Port 7 */ + case PCI_DEVFN(28, 7): /* PCI Express Root Port 8 */ + RCBA32_OR(FD, PCH_DISABLE_PCIE(PCI_FUNC(devfn))); + break; + case PCI_DEVFN(29, 0): /* EHCI #1 */ + RCBA32_OR(FD, PCH_DISABLE_EHCI1); + break; + case PCI_DEVFN(30, 0): /* PCI-to-PCI Bridge */ + RCBA32_OR(FD, PCH_DISABLE_P2P); + break; + case PCI_DEVFN(31, 0): /* LPC */ + RCBA32_OR(FD, PCH_DISABLE_LPC); + break; + case PCI_DEVFN(31, 2): /* SATA #1 */ + RCBA32_OR(FD, PCH_DISABLE_SATA1); + break; + case PCI_DEVFN(31, 3): /* SMBUS */ + RCBA32_OR(FD, PCH_DISABLE_SMBUS); + break; + case PCI_DEVFN(31, 5): /* SATA #22 */ + RCBA32_OR(FD, PCH_DISABLE_SATA2); + break; + case PCI_DEVFN(31, 6): /* Thermal Subsystem */ + RCBA32_OR(FD, PCH_DISABLE_THERMAL); + break; + } +} + +#define IOBP_RETRY 1000 +static inline int iobp_poll(void) +{ + unsigned try = IOBP_RETRY; + u32 data; + + while (try--) { + data = RCBA32(IOBPS); + if ((data & 1) == 0) + return 1; + udelay(10); + } + + printk(BIOS_ERR, "IOBP timeout\n"); + return 0; +} + +void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue) +{ + u32 data; + + /* Set the address */ + RCBA32(IOBPIRI) = address; + + /* READ OPCODE */ + if (pch_silicon_supported(PCH_TYPE_CPT, PCH_STEP_B0)) + RCBA32(IOBPS) = IOBPS_RW_BX; + else + RCBA32(IOBPS) = IOBPS_READ_AX; + if (!iobp_poll()) + return; + + /* Read IOBP data */ + data = RCBA32(IOBPD); + if (!iobp_poll()) + return; + + /* Check for successful transaction */ + if ((RCBA32(IOBPS) & 0x6) != 0) { + printk(BIOS_ERR, "IOBP read 0x%08x failed\n", address); + return; + } + + /* Update the data */ + data &= andvalue; + data |= orvalue; + + /* WRITE OPCODE */ + if (pch_silicon_supported(PCH_TYPE_CPT, PCH_STEP_B0)) + RCBA32(IOBPS) = IOBPS_RW_BX; + else + RCBA32(IOBPS) = IOBPS_WRITE_AX; + if (!iobp_poll()) + return; + + /* Write IOBP data */ + RCBA32(IOBPD) = data; + if (!iobp_poll()) + return; +} + +/* Check if any port in set X to X+3 is enabled */ +static int pch_pcie_check_set_enabled(device_t dev) +{ + device_t port; + int port_func; + int dev_func = PCI_FUNC(dev->path.pci.devfn); + + printk(BIOS_DEBUG, "%s: check set enabled\n", dev_path(dev)); + + /* Go through static device tree list of devices + * because enumeration is still in progress */ + for (port = all_devices; port; port = port->next) { + /* Only care about PCIe root ports */ + if (PCI_SLOT(port->path.pci.devfn) != + PCI_SLOT(dev->path.pci.devfn)) + continue; + + /* Check if port is in range and enabled */ + port_func = PCI_FUNC(port->path.pci.devfn); + if (port_func >= dev_func && + port_func < (dev_func + 4) && + port->enabled) + return 1; + } + + /* None of the ports in this set are enabled */ + return 0; +} + +/* RPFN is a write-once register so keep a copy until it is written */ +static u32 new_rpfn; + +/* Swap function numbers assigned to two PCIe Root Ports */ +static void pch_pcie_function_swap(u8 old_fn, u8 new_fn) +{ + u32 old_rpfn = new_rpfn; + + printk(BIOS_DEBUG, "PCH: Remap PCIe function %d to %d\n", + old_fn, new_fn); + + new_rpfn &= ~(RPFN_FNMASK(old_fn) | RPFN_FNMASK(new_fn)); + + /* Old function set to new function and disabled */ + new_rpfn |= RPFN_FNSET(old_fn, RPFN_FNGET(old_rpfn, new_fn)); + new_rpfn |= RPFN_FNSET(new_fn, RPFN_FNGET(old_rpfn, old_fn)); +} + +/* Update devicetree with new Root Port function number assignment */ +static void pch_pcie_devicetree_update(void) +{ + device_t dev; + + /* Update the function numbers in the static devicetree */ + for (dev = all_devices; dev; dev = dev->next) { + u8 new_devfn; + + /* Only care about PCH PCIe root ports */ + if (PCI_SLOT(dev->path.pci.devfn) != + PCH_PCIE_DEV_SLOT) + continue; + + /* Determine the new devfn for this port */ + new_devfn = PCI_DEVFN(PCH_PCIE_DEV_SLOT, + RPFN_FNGET(new_rpfn, + PCI_FUNC(dev->path.pci.devfn))); + + if (dev->path.pci.devfn != new_devfn) { + printk(BIOS_DEBUG, + "PCH: PCIe map %02x.%1x -> %02x.%1x\n", + PCI_SLOT(dev->path.pci.devfn), + PCI_FUNC(dev->path.pci.devfn), + PCI_SLOT(new_devfn), PCI_FUNC(new_devfn)); + + dev->path.pci.devfn = new_devfn; + } + } +} + +/* Special handling for PCIe Root Port devices */ +static void pch_pcie_enable(device_t dev) +{ + struct southbridge_intel_fsp_bd82x6x_config *config = dev->chip_info; + u32 reg32; + + /* + * Save a copy of the Root Port Function Number map when + * starting to walk the list of PCIe Root Ports so it can + * be updated locally and written out when the last port + * has been processed. + */ + if (PCI_FUNC(dev->path.pci.devfn) == 0) { + new_rpfn = RCBA32(RPFN); + + /* + * Enable Root Port coalescing if the first port is disabled + * or the other devices will not be enumerated by the OS. + */ + if (!dev->enabled) + config->pcie_port_coalesce = 1; + + if (config->pcie_port_coalesce) + printk(BIOS_INFO, + "PCH: PCIe Root Port coalescing is enabled\n"); + } + + if (!dev->enabled) { + printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev)); + + /* + * PCIE Power Savings for PantherPoint and CougarPoint/B1+ + * + * If PCIe 0-3 disabled set Function 0 0xE2[0] = 1 + * If PCIe 4-7 disabled set Function 4 0xE2[0] = 1 + * + * This check is done here instead of pcie driver + * because the pcie driver enable() handler is not + * called unless the device is enabled. + */ + if ((PCI_FUNC(dev->path.pci.devfn) == 0 || + PCI_FUNC(dev->path.pci.devfn) == 4)) { + /* Handle workaround for PPT and CPT/B1+ */ + if (pch_silicon_supported(PCH_TYPE_CPT, PCH_STEP_B1) && + !pch_pcie_check_set_enabled(dev)) { + u8 reg8 = pci_read_config8(dev, 0xe2); + reg8 |= 1; + pci_write_config8(dev, 0xe2, reg8); + } + + /* + * Enable Clock Gating for shared PCIe resources + * before disabling this particular port. + */ + pci_write_config8(dev, 0xe1, 0x3c); + } + + /* Ensure memory, io, and bus master are all disabled */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 &= ~(PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | PCI_COMMAND_IO); + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Do not claim downstream transactions for PCIe ports */ + new_rpfn |= RPFN_HIDE(PCI_FUNC(dev->path.pci.devfn)); + + /* Hide this device if possible */ + pch_hide_devfn(dev->path.pci.devfn); + } else { + int fn; + + /* + * Check if there is a lower disabled port to swap with this + * port in order to maintain linear order starting at zero. + */ + if (config->pcie_port_coalesce) { + for (fn=0; fn < PCI_FUNC(dev->path.pci.devfn); fn++) { + if (!(new_rpfn & RPFN_HIDE(fn))) + continue; + + /* Swap places with this function */ + pch_pcie_function_swap( + PCI_FUNC(dev->path.pci.devfn), fn); + break; + } + } + + /* Enable SERR */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_SERR; + pci_write_config32(dev, PCI_COMMAND, reg32); + } + + /* + * When processing the last PCIe root port we can now + * update the Root Port Function Number and Hide register. + */ + if (PCI_FUNC(dev->path.pci.devfn) == 7) { + printk(BIOS_SPEW, "PCH: RPFN 0x%08x -> 0x%08x\n", + RCBA32(RPFN), new_rpfn); + RCBA32(RPFN) = new_rpfn; + + /* Update static devictree with new function numbers */ + if (config->pcie_port_coalesce) + pch_pcie_devicetree_update(); + } +} + +void pch_enable(device_t dev) +{ + u32 reg32; + + /* PCH PCIe Root Ports get special handling */ + if (PCI_SLOT(dev->path.pci.devfn) == PCH_PCIE_DEV_SLOT) + return pch_pcie_enable(dev); + + if (!dev->enabled) { + printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev)); + + /* Ensure memory, io, and bus master are all disabled */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 &= ~(PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | PCI_COMMAND_IO); + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* Hide this device if possible */ + pch_hide_devfn(dev->path.pci.devfn); + } else { + /* Enable SERR */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_SERR; + pci_write_config32(dev, PCI_COMMAND, reg32); + } +} + +struct chip_operations southbridge_intel_fsp_bd82x6x_ops = { + CHIP_NAME("Intel Series 6/7 (Cougar Point/Panther Point) Southbridge") + .enable_dev = pch_enable, +}; diff --git a/src/southbridge/intel/fsp_bd82x6x/pch.h b/src/southbridge/intel/fsp_bd82x6x/pch.h new file mode 100644 index 0000000..a06ca74 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/pch.h @@ -0,0 +1,585 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SOUTHBRIDGE_INTEL_FSP_BD82X6X_PCH_H +#define SOUTHBRIDGE_INTEL_FSP_BD82X6X_PCH_H + +/* PCH types */ +#define PCH_TYPE_CPT 0x1c /* CougarPoint */ +#define PCH_TYPE_PPT 0x1e /* IvyBridge */ + +/* PCH stepping values for LPC device */ +#define PCH_STEP_A0 0 +#define PCH_STEP_A1 1 +#define PCH_STEP_B0 2 +#define PCH_STEP_B1 3 +#define PCH_STEP_B2 4 +#define PCH_STEP_B3 5 + +/* + * It does not matter where we put the SMBus I/O base, as long as we + * keep it consistent and don't interfere with other devices. Stage2 + * will relocate this anyways. + * Our solution is to have SMB initialization move the I/O to SMBUS_IO_BASE + * again. But handling static BARs is a generic problem that should be + * solved in the device allocator. + */ +#define SMBUS_IO_BASE 0x0500 +#define SMBUS_SLAVE_ADDR 0x24 +/* TODO Make sure these don't get changed by stage2 */ +#define DEFAULT_GPIOBASE 0x0480 +#define DEFAULT_PMBASE 0x0400 + +#define DEFAULT_RCBA 0xfed1c000 + +#ifndef __ACPI__ +#define DEBUG_PERIODIC_SMIS 0 + +#if defined (__SMM__) && !defined(__ASSEMBLER__) +void intel_pch_finalize_smm(void); +#endif + +#if !defined(__ASSEMBLER__) && !defined(__ROMCC__) +#if !defined(__PRE_RAM__) && !defined(__SMM__) +#include "chip.h" +int pch_silicon_revision(void); +int pch_silicon_type(void); +int pch_silicon_supported(int type, int rev); +void pch_enable(device_t dev); +void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue); +#if CONFIG_ELOG +void pch_log_state(void); +#endif +#else +/* writes an address and one byte of data */ +s16 smbus_write_single_byte(u8 device, u8 address, u8 data); + +/* Sends an address and reads one byte of data */ +int smbus_read_byte(unsigned device, unsigned address); + +/* writes a single byte of data to smbus without an address byte */ +s16 smbus_quick_write(u8 device, u8 data); + +/* gets one byte of data from smbus without writing an address. */ +s16 smbus_quick_read(u8 device); + +void enable_smbus(void); +void enable_usb_bar(void); +int early_spi_read(u32 offset, u32 size, u8 *buffer); +void sandybridge_sb_early_initialization(void); +void early_pch_init(void); +void display_fd_settings(void); +#endif +#endif + +#define MAINBOARD_POWER_OFF 0 +#define MAINBOARD_POWER_ON 1 +#define MAINBOARD_POWER_KEEP 2 + +#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL +#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON +#endif + +/* PCI Configuration Space (D30:F0): PCI2PCI */ +#define PSTS 0x06 +#define SMLT 0x1b +#define SECSTS 0x1e +#define INTR 0x3c +#define BCTRL 0x3e +#define SBR (1 << 6) +#define SEE (1 << 1) +#define PERE (1 << 0) + +#define PCH_EHCI1_DEV PCI_DEV(0, 0x1d, 0) +#define PCH_EHCI2_DEV PCI_DEV(0, 0x1a, 0) +#define PCH_ME_DEV PCI_DEV(0, 0x16, 0) +#define PCH_PCIE_DEV_SLOT 28 + +/* PCI Configuration Space (D31:F0): LPC */ +#define PCH_LPC_DEV PCI_DEV(0, 0x1f, 0) +#define SERIRQ_CNTL 0x64 + +#define GEN_PMCON_1 0xa0 +#define GEN_PMCON_2 0xa2 +#define GEN_PMCON_3 0xa4 +#define ETR3 0xac +#define ETR3_CWORWRE (1 << 18) +#define ETR3_CF9GR (1 << 20) + +/* GEN_PMCON_3 bits */ +#define RTC_BATTERY_DEAD (1 << 2) +#define RTC_POWER_FAILED (1 << 1) +#define SLEEP_AFTER_POWER_FAIL (1 << 0) + +#define PMBASE 0x40 +#define ACPI_CNTL 0x44 +#define BIOS_CNTL 0xDC +#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */ +#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */ +#define GPIO_ROUT 0xb8 + +#define PIRQA_ROUT 0x60 +#define PIRQB_ROUT 0x61 +#define PIRQC_ROUT 0x62 +#define PIRQD_ROUT 0x63 +#define PIRQE_ROUT 0x68 +#define PIRQF_ROUT 0x69 +#define PIRQG_ROUT 0x6A +#define PIRQH_ROUT 0x6B + +#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */ +#define LPC_EN 0x82 /* LPC IF Enables Register */ +#define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */ +#define CNF1_LPC_EN (1 << 12) /* 0x2e/0x2f */ +#define MC_LPC_EN (1 << 11) /* 0x62/0x66 */ +#define KBC_LPC_EN (1 << 10) /* 0x60/0x64 */ +#define GAMEH_LPC_EN (1 << 9) /* 0x208/0x20f */ +#define GAMEL_LPC_EN (1 << 8) /* 0x200/0x207 */ +#define FDD_LPC_EN (1 << 3) /* LPC_IO_DEC[12] */ +#define LPT_LPC_EN (1 << 2) /* LPC_IO_DEC[9:8] */ +#define COMB_LPC_EN (1 << 1) /* LPC_IO_DEC[6:4] */ +#define COMA_LPC_EN (1 << 0) /* LPC_IO_DEC[3:2] */ +#define LPC_GEN1_DEC 0x84 /* LPC IF Generic Decode Range 1 */ +#define LPC_GEN2_DEC 0x88 /* LPC IF Generic Decode Range 2 */ +#define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */ +#define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */ + +/* PCI Configuration Space (D31:F1): IDE */ +#define PCH_IDE_DEV PCI_DEV(0, 0x1f, 1) +#define PCH_SATA_DEV PCI_DEV(0, 0x1f, 2) +#define PCH_SATA2_DEV PCI_DEV(0, 0x1f, 5) +#define INTR_LN 0x3c +#define IDE_TIM_PRI 0x40 /* IDE timings, primary */ +#define IDE_DECODE_ENABLE (1 << 15) +#define IDE_SITRE (1 << 14) +#define IDE_ISP_5_CLOCKS (0 << 12) +#define IDE_ISP_4_CLOCKS (1 << 12) +#define IDE_ISP_3_CLOCKS (2 << 12) +#define IDE_RCT_4_CLOCKS (0 << 8) +#define IDE_RCT_3_CLOCKS (1 << 8) +#define IDE_RCT_2_CLOCKS (2 << 8) +#define IDE_RCT_1_CLOCKS (3 << 8) +#define IDE_DTE1 (1 << 7) +#define IDE_PPE1 (1 << 6) +#define IDE_IE1 (1 << 5) +#define IDE_TIME1 (1 << 4) +#define IDE_DTE0 (1 << 3) +#define IDE_PPE0 (1 << 2) +#define IDE_IE0 (1 << 1) +#define IDE_TIME0 (1 << 0) +#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ + +#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */ +#define IDE_SSDE1 (1 << 3) +#define IDE_SSDE0 (1 << 2) +#define IDE_PSDE1 (1 << 1) +#define IDE_PSDE0 (1 << 0) + +#define IDE_SDMA_TIM 0x4a + +#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */ +#define SIG_MODE_SEC_NORMAL (0 << 18) +#define SIG_MODE_SEC_TRISTATE (1 << 18) +#define SIG_MODE_SEC_DRIVELOW (2 << 18) +#define SIG_MODE_PRI_NORMAL (0 << 16) +#define SIG_MODE_PRI_TRISTATE (1 << 16) +#define SIG_MODE_PRI_DRIVELOW (2 << 16) +#define FAST_SCB1 (1 << 15) +#define FAST_SCB0 (1 << 14) +#define FAST_PCB1 (1 << 13) +#define FAST_PCB0 (1 << 12) +#define SCB1 (1 << 3) +#define SCB0 (1 << 2) +#define PCB1 (1 << 1) +#define PCB0 (1 << 0) + +#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ +#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ +#define SATA_SP 0xd0 /* Scratchpad */ + +/* SATA IOBP Registers */ +#define SATA_IOBP_SP0G3IR 0xea000151 +#define SATA_IOBP_SP1G3IR 0xea000051 + +/* PCI Configuration Space (D31:F3): SMBus */ +#define PCH_SMBUS_DEV PCI_DEV(0, 0x1f, 3) +#define SMB_BASE 0x20 +#define HOSTC 0x40 +#define SMB_RCV_SLVA 0x09 + +/* HOSTC bits */ +#define I2C_EN (1 << 2) +#define SMB_SMI_EN (1 << 1) +#define HST_EN (1 << 0) + +/* SMBus I/O bits. */ +#define SMBHSTSTAT 0x0 +#define SMBHSTCTL 0x2 +#define SMBHSTCMD 0x3 +#define SMBXMITADD 0x4 +#define SMBHSTDAT0 0x5 +#define SMBHSTDAT1 0x6 +#define SMBBLKDAT 0x7 +#define SMBTRNSADD 0x9 +#define SMBSLVDATA 0xa +#define SMLINK_PIN_CTL 0xe +#define SMBUS_PIN_CTL 0xf + +#define HSTSTS_HOST_BUSY (1 << 0) +#define HSTSTS_INTR (1 << 1) +#define HSTSTS_DEV_ERR (1 << 2) +#define HSTSTS_BUS_ERR (1 << 3) +#define HSTSTS_FAILED (1 << 4) +#define HSTSTS_SMBALERT_STS (1 << 5) +#define HSTSTS_INUSE_STS (1 << 6) +#define HSTSTS_BYTE_DONE_STS (1 << 7) + +#define SMBUS_TIMEOUT (10 * 1000 * 100) + + +/* Southbridge IO BARs */ + +#define GPIOBASE 0x48 + +#define PMBASE 0x40 + +/* Root Complex Register Block */ +#define RCBA 0xf0 + +#define RCBA8(x) *((volatile u8 *)(DEFAULT_RCBA + x)) +#define RCBA16(x) *((volatile u16 *)(DEFAULT_RCBA + x)) +#define RCBA32(x) *((volatile u32 *)(DEFAULT_RCBA + x)) + +#define RCBA_AND_OR(bits, x, and, or) \ + RCBA##bits(x) = ((RCBA##bits(x) & (and)) | (or)) +#define RCBA8_AND_OR(x, and, or) RCBA_AND_OR(8, x, and, or) +#define RCBA16_AND_OR(x, and, or) RCBA_AND_OR(16, x, and, or) +#define RCBA32_AND_OR(x, and, or) RCBA_AND_OR(32, x, and, or) +#define RCBA32_OR(x, or) RCBA_AND_OR(32, x, ~0UL, or) + +#define VCH 0x0000 /* 32bit */ +#define VCAP1 0x0004 /* 32bit */ +#define VCAP2 0x0008 /* 32bit */ +#define PVC 0x000c /* 16bit */ +#define PVS 0x000e /* 16bit */ + +#define V0CAP 0x0010 /* 32bit */ +#define V0CTL 0x0014 /* 32bit */ +#define V0STS 0x001a /* 16bit */ + +#define V1CAP 0x001c /* 32bit */ +#define V1CTL 0x0020 /* 32bit */ +#define V1STS 0x0026 /* 16bit */ + +#define RCTCL 0x0100 /* 32bit */ +#define ESD 0x0104 /* 32bit */ +#define ULD 0x0110 /* 32bit */ +#define ULBA 0x0118 /* 64bit */ + +#define RP1D 0x0120 /* 32bit */ +#define RP1BA 0x0128 /* 64bit */ +#define RP2D 0x0130 /* 32bit */ +#define RP2BA 0x0138 /* 64bit */ +#define RP3D 0x0140 /* 32bit */ +#define RP3BA 0x0148 /* 64bit */ +#define RP4D 0x0150 /* 32bit */ +#define RP4BA 0x0158 /* 64bit */ +#define HDD 0x0160 /* 32bit */ +#define HDBA 0x0168 /* 64bit */ +#define RP5D 0x0170 /* 32bit */ +#define RP5BA 0x0178 /* 64bit */ +#define RP6D 0x0180 /* 32bit */ +#define RP6BA 0x0188 /* 64bit */ + +#define RPC 0x0400 /* 32bit */ +#define RPFN 0x0404 /* 32bit */ + +/* Root Port configuratinon space hide */ +#define RPFN_HIDE(port) (1 << (((port) * 4) + 3)) +/* Get the function number assigned to a Root Port */ +#define RPFN_FNGET(reg,port) (((reg) >> ((port) * 4)) & 7) +/* Set the function number for a Root Port */ +#define RPFN_FNSET(port,func) (((func) & 7) << ((port) * 4)) +/* Root Port function number mask */ +#define RPFN_FNMASK(port) (7 << ((port) * 4)) + +#define TRSR 0x1e00 /* 8bit */ +#define TRCR 0x1e10 /* 64bit */ +#define TWDR 0x1e18 /* 64bit */ + +#define IOTR0 0x1e80 /* 64bit */ +#define IOTR1 0x1e88 /* 64bit */ +#define IOTR2 0x1e90 /* 64bit */ +#define IOTR3 0x1e98 /* 64bit */ + +#define TCTL 0x3000 /* 8bit */ + +#define NOINT 0 +#define INTA 1 +#define INTB 2 +#define INTC 3 +#define INTD 4 + +#define DIR_IDR 12 /* Interrupt D Pin Offset */ +#define DIR_ICR 8 /* Interrupt C Pin Offset */ +#define DIR_IBR 4 /* Interrupt B Pin Offset */ +#define DIR_IAR 0 /* Interrupt A Pin Offset */ + +#define PIRQA 0 +#define PIRQB 1 +#define PIRQC 2 +#define PIRQD 3 +#define PIRQE 4 +#define PIRQF 5 +#define PIRQG 6 +#define PIRQH 7 + +/* IO Buffer Programming */ +#define IOBPIRI 0x2330 +#define IOBPD 0x2334 +#define IOBPS 0x2338 +#define IOBPS_RW_BX ((1 << 9)|(1 << 10)) +#define IOBPS_WRITE_AX ((1 << 9)|(1 << 10)) +#define IOBPS_READ_AX ((1 << 8)|(1 << 9)|(1 << 10)) + +#define D31IP 0x3100 /* 32bit */ +#define D31IP_TTIP 24 /* Thermal Throttle Pin */ +#define D31IP_SIP2 20 /* SATA Pin 2 */ +#define D31IP_SMIP 12 /* SMBUS Pin */ +#define D31IP_SIP 8 /* SATA Pin */ +#define D30IP 0x3104 /* 32bit */ +#define D30IP_PIP 0 /* PCI Bridge Pin */ +#define D29IP 0x3108 /* 32bit */ +#define D29IP_E1P 0 /* EHCI #1 Pin */ +#define D28IP 0x310c /* 32bit */ +#define D28IP_P8IP 28 /* PCI Express Port 8 */ +#define D28IP_P7IP 24 /* PCI Express Port 7 */ +#define D28IP_P6IP 20 /* PCI Express Port 6 */ +#define D28IP_P5IP 16 /* PCI Express Port 5 */ +#define D28IP_P4IP 12 /* PCI Express Port 4 */ +#define D28IP_P3IP 8 /* PCI Express Port 3 */ +#define D28IP_P2IP 4 /* PCI Express Port 2 */ +#define D28IP_P1IP 0 /* PCI Express Port 1 */ +#define D27IP 0x3110 /* 32bit */ +#define D27IP_ZIP 0 /* HD Audio Pin */ +#define D26IP 0x3114 /* 32bit */ +#define D26IP_E2P 0 /* EHCI #2 Pin */ +#define D25IP 0x3118 /* 32bit */ +#define D25IP_LIP 0 /* GbE LAN Pin */ +#define D22IP 0x3124 /* 32bit */ +#define D22IP_KTIP 12 /* KT Pin */ +#define D22IP_IDERIP 8 /* IDE-R Pin */ +#define D22IP_MEI2IP 4 /* MEI #2 Pin */ +#define D22IP_MEI1IP 0 /* MEI #1 Pin */ +#define D20IP 0x3128 /* 32bit */ +#define D20IP_XHCIIP 0 +#define D31IR 0x3140 /* 16bit */ +#define D30IR 0x3142 /* 16bit */ +#define D29IR 0x3144 /* 16bit */ +#define D28IR 0x3146 /* 16bit */ +#define D27IR 0x3148 /* 16bit */ +#define D26IR 0x314c /* 16bit */ +#define D25IR 0x3150 /* 16bit */ +#define D22IR 0x315c /* 16bit */ +#define D20IR 0x3160 /* 16bit */ +#define OIC 0x31fe /* 16bit */ +#define SOFT_RESET_CTRL 0x38f4 +#define SOFT_RESET_DATA 0x38f8 + +#define DIR_ROUTE(x,a,b,c,d) \ + RCBA32(x) = (((d) << DIR_IDR) | ((c) << DIR_ICR) | \ + ((b) << DIR_IBR) | ((a) << DIR_IAR)) + +#define RC 0x3400 /* 32bit */ +#define HPTC 0x3404 /* 32bit */ +#define GCS 0x3410 /* 32bit */ +#define BUC 0x3414 /* 32bit */ +#define PCH_DISABLE_GBE (1 << 5) +#define FD 0x3418 /* 32bit */ +#define DISPBDF 0x3424 /* 16bit */ +#define FD2 0x3428 /* 32bit */ +#define CG 0x341c /* 32bit */ + +/* Function Disable 1 RCBA 0x3418 */ +#define PCH_DISABLE_ALWAYS (1 << 0) +#define PCH_DISABLE_P2P (1 << 1) +#define PCH_DISABLE_SATA1 (1 << 2) +#define PCH_DISABLE_SMBUS (1 << 3) +#define PCH_DISABLE_HD_AUDIO (1 << 4) +#define PCH_DISABLE_EHCI2 (1 << 13) +#define PCH_DISABLE_LPC (1 << 14) +#define PCH_DISABLE_EHCI1 (1 << 15) +#define PCH_DISABLE_PCIE(x) (1 << (16 + x)) +#define PCH_DISABLE_THERMAL (1 << 24) +#define PCH_DISABLE_SATA2 (1 << 25) + +/* Function Disable 2 RCBA 0x3428 */ +#define PCH_DISABLE_KT (1 << 4) +#define PCH_DISABLE_IDER (1 << 3) +#define PCH_DISABLE_MEI2 (1 << 2) +#define PCH_DISABLE_MEI1 (1 << 1) +#define PCH_ENABLE_DBDF (1 << 0) + +/* ICH7 GPIOBASE */ +#define GPIO_USE_SEL 0x00 +#define GP_IO_SEL 0x04 +#define GP_LVL 0x0c +#define GPO_BLINK 0x18 +#define GPI_INV 0x2c +#define GPIO_USE_SEL2 0x30 +#define GP_IO_SEL2 0x34 +#define GP_LVL2 0x38 +#define GPIO_USE_SEL3 0x40 +#define GP_IO_SEL3 0x44 +#define GP_LVL3 0x48 +#define GP_RST_SEL1 0x60 +#define GP_RST_SEL2 0x64 +#define GP_RST_SEL3 0x68 + +/* ICH7 PMBASE */ +#define PM1_STS 0x00 +#define WAK_STS (1 << 15) +#define PCIEXPWAK_STS (1 << 14) +#define PRBTNOR_STS (1 << 11) +#define RTC_STS (1 << 10) +#define PWRBTN_STS (1 << 8) +#define GBL_STS (1 << 5) +#define BM_STS (1 << 4) +#define TMROF_STS (1 << 0) +#define PM1_EN 0x02 +#define PCIEXPWAK_DIS (1 << 14) +#define RTC_EN (1 << 10) +#define PWRBTN_EN (1 << 8) +#define GBL_EN (1 << 5) +#define TMROF_EN (1 << 0) +#define PM1_CNT 0x04 +#define SLP_EN (1 << 13) +#define SLP_TYP (7 << 10) +#define SLP_TYP_S0 0 +#define SLP_TYP_S1 1 +#define SLP_TYP_S3 5 +#define SLP_TYP_S4 6 +#define SLP_TYP_S5 7 +#define GBL_RLS (1 << 2) +#define BM_RLD (1 << 1) +#define SCI_EN (1 << 0) +#define PM1_TMR 0x08 +#define PROC_CNT 0x10 +#define LV2 0x14 +#define LV3 0x15 +#define LV4 0x16 +#define PM2_CNT 0x50 // mobile only +#define GPE0_STS 0x20 +#define PME_B0_STS (1 << 13) +#define PME_STS (1 << 11) +#define BATLOW_STS (1 << 10) +#define PCI_EXP_STS (1 << 9) +#define RI_STS (1 << 8) +#define SMB_WAK_STS (1 << 7) +#define TCOSCI_STS (1 << 6) +#define SWGPE_STS (1 << 2) +#define HOT_PLUG_STS (1 << 1) +#define GPE0_EN 0x28 +#define PME_B0_EN (1 << 13) +#define PME_EN (1 << 11) +#define TCOSCI_EN (1 << 6) +#define SMI_EN 0x30 +#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic +#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic +#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS +#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) +#define MCSMI_EN (1 << 11) // Trap microcontroller range access +#define BIOS_RLS (1 << 7) // asserts SCI on bit set +#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set +#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# +#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# +#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic +#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit +#define EOS (1 << 1) // End of SMI (deassert SMI#) +#define GBL_SMI_EN (1 << 0) // SMI# generation at all? +#define SMI_STS 0x34 +#define ALT_GP_SMI_EN 0x38 +#define ALT_GP_SMI_STS 0x3a +#define GPE_CNTL 0x42 +#define DEVACT_STS 0x44 +#define SS_CNT 0x50 +#define C3_RES 0x54 +#define TCO1_STS 0x64 +#define DMISCI_STS (1 << 9) +#define TCO2_STS 0x66 + +/* + * SPI Opcode Menu setup for SPIBAR lockdown + * should support most common flash chips. + */ + +#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */ +#define SPI_OPTYPE_0 0x01 /* Write, no address */ + +#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */ +#define SPI_OPTYPE_1 0x03 /* Write, address required */ + +#define SPI_OPMENU_2 0x03 /* READ: Read Data */ +#define SPI_OPTYPE_2 0x02 /* Read, address required */ + +#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */ +#define SPI_OPTYPE_3 0x00 /* Read, no address */ + +#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */ +#define SPI_OPTYPE_4 0x03 /* Write, address required */ + +#define SPI_OPMENU_5 0x9f /* RDID: Read ID */ +#define SPI_OPTYPE_5 0x00 /* Read, no address */ + +#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */ +#define SPI_OPTYPE_6 0x03 /* Write, address required */ + +#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */ +#define SPI_OPTYPE_7 0x02 /* Read, address required */ + +#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \ + (SPI_OPMENU_5 << 8) | SPI_OPMENU_4) +#define SPI_OPMENU_LOWER ((SPI_OPMENU_3 << 24) | (SPI_OPMENU_2 << 16) | \ + (SPI_OPMENU_1 << 8) | SPI_OPMENU_0) + +#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \ + (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \ + (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \ + (SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0)) + +#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */ + +#define SPIBAR_HSFS 0x3804 /* SPI hardware sequence status */ +#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */ +#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */ +#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ +#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ +#define SPIBAR_HSFC 0x3806 /* SPI hardware sequence control */ +#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8) +#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ +#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ +#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ +#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ +#define SPIBAR_FADDR 0x3808 /* SPI flash address */ +#define SPIBAR_FDATA(n) (0x3810 + (4 * n)) /* SPI flash data */ + +#endif /* __ACPI__ */ +#endif /* SOUTHBRIDGE_INTEL_BD82X6X_PCH_H */ diff --git a/src/southbridge/intel/fsp_bd82x6x/reset.c b/src/southbridge/intel/fsp_bd82x6x/reset.c new file mode 100644 index 0000000..d4ca084 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/reset.c @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <arch/hlt.h> +#include <reset.h> + +void soft_reset(void) +{ + outb(0x04, 0xcf9); +} + +void hard_reset(void) +{ + outb(0x06, 0xcf9); +} + +void reset_system(void) +{ + hard_reset(); + while (1) { + hlt(); + } +} diff --git a/src/southbridge/intel/fsp_bd82x6x/sata.c b/src/southbridge/intel/fsp_bd82x6x/sata.c new file mode 100644 index 0000000..60790d4 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/sata.c @@ -0,0 +1,123 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "pch.h" + +typedef struct southbridge_intel_fsp_bd82x6x_config config_t; + +static void sata_init(struct device *dev) +{ + u32 reg32; + u16 reg16; + /* Get the chip configuration */ + config_t *config = dev->chip_info; + + printk(BIOS_DEBUG, "SATA: Initializing...\n"); + + if (config == NULL) { + printk(BIOS_ERR, "SATA: ERROR: Device not in devicetree.cb!\n"); + return; + } + + /* SATA configuration is handled by the FSP */ + + /* Enable BARs */ + pci_write_config16(dev, PCI_COMMAND, 0x0007); + + if (config->ide_legacy_combined) { + printk(BIOS_DEBUG, "SATA: Controller in combined mode.\n"); + + /* No AHCI: clear AHCI base */ + pci_write_config32(dev, 0x24, 0x00000000); + /* And without AHCI BAR no memory decoding */ + reg16 = pci_read_config16(dev, PCI_COMMAND); + reg16 &= ~PCI_COMMAND_MEMORY; + pci_write_config16(dev, PCI_COMMAND, reg16); + } else if(config->sata_ahci) { + u32 abar; + + printk(BIOS_DEBUG, "SATA: Controller in AHCI mode.\n"); + + /* Set Interrupt Line */ + /* Interrupt Pin is set by D31IP.PIP */ + pci_write_config8(dev, INTR_LN, 0x0a); + + /* Initialize AHCI memory-mapped space */ + abar = pci_read_config32(dev, PCI_BASE_ADDRESS_5); + printk(BIOS_DEBUG, "ABAR: %08X\n", abar); + /* Enable AHCI Mode */ + reg32 = read32(abar + 0x04); + reg32 |= (1 << 31); + write32(abar + 0x04, reg32); + } else { + printk(BIOS_DEBUG, "SATA: Controller in plain mode.\n"); + + /* Set Interrupt Line */ + /* Interrupt Pin is set by D31IP.PIP */ + pci_write_config8(dev, INTR_LN, 0xff); + } + +} + +static void sata_enable(device_t dev) +{ +} + +static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations sata_pci_ops = { + .set_subsystem = sata_set_subsystem, +}; + +static struct device_operations sata_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = sata_init, + .enable = sata_enable, + .scan_bus = 0, + .ops_pci = &sata_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { 0x1c00, 0x1c01, 0x1c02, 0x1c03, + 0x1e00, 0x1e01, 0x1e02, 0x1e03, 0x2323, + 0 }; + +static const struct pci_driver pch_sata __pci_driver = { + .ops = &sata_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; + diff --git a/src/southbridge/intel/fsp_bd82x6x/smi.c b/src/southbridge/intel/fsp_bd82x6x/smi.c new file mode 100644 index 0000000..bc47395 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/smi.c @@ -0,0 +1,416 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + + +#include <device/device.h> +#include <device/pci.h> +#include <console/console.h> +#include <arch/io.h> +#include <cpu/cpu.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/smm.h> +#include <string.h> +#include "pch.h" + +#if CONFIG_NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE || CONFIG_NORTHBRIDGE_INTEL_FSP_IVYBRIDGE +#include "northbridge/intel/fsp_sandybridge/northbridge.h" +#endif + +extern unsigned char _binary_smm_start; +extern unsigned char _binary_smm_size; + +/* While we read PMBASE dynamically in case it changed, let's + * initialize it with a sane value + */ +static u16 pmbase = DEFAULT_PMBASE; + +/** + * @brief read and clear PM1_STS + * @return PM1_STS register + */ +static u16 reset_pm1_status(void) +{ + u16 reg16; + + reg16 = inw(pmbase + PM1_STS); + /* set status bits are cleared by writing 1 to them */ + outw(reg16, pmbase + PM1_STS); + + return reg16; +} + +static void dump_pm1_status(u16 pm1_sts) +{ + printk(BIOS_DEBUG, "PM1_STS: "); + if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK "); + if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK "); + if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR "); + if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC "); + if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN "); + if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL "); + if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM "); + if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF "); + printk(BIOS_DEBUG, "\n"); +} + +/** + * @brief read and clear SMI_STS + * @return SMI_STS register + */ +static u32 reset_smi_status(void) +{ + u32 reg32; + + reg32 = inl(pmbase + SMI_STS); + /* set status bits are cleared by writing 1 to them */ + outl(reg32, pmbase + SMI_STS); + + return reg32; +} + +static void dump_smi_status(u32 smi_sts) +{ + printk(BIOS_DEBUG, "SMI_STS: "); + if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); + if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); + if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); + if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); + if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); + if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); + if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); + if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); + if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); + if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); + if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); + if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); + if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); + if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); + if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); + if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); + if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); + if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); + if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); + if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); + printk(BIOS_DEBUG, "\n"); +} + + +/** + * @brief read and clear GPE0_STS + * @return GPE0_STS register + */ +static u32 reset_gpe0_status(void) +{ + u32 reg32; + + reg32 = inl(pmbase + GPE0_STS); + /* set status bits are cleared by writing 1 to them */ + outl(reg32, pmbase + GPE0_STS); + + return reg32; +} + +static void dump_gpe0_status(u32 gpe0_sts) +{ + int i; + printk(BIOS_DEBUG, "GPE0_STS: "); + for (i=31; i<= 16; i--) { + if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); + } + if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); + if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); + if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); + if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); + if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); + if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); + if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); + if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); + if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); + if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); + if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); + if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); + if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); + if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); + printk(BIOS_DEBUG, "\n"); +} + + +/** + * @brief read and clear ALT_GP_SMI_STS + * @return ALT_GP_SMI_STS register + */ +static u16 reset_alt_gp_smi_status(void) +{ + u16 reg16; + + reg16 = inl(pmbase + ALT_GP_SMI_STS); + /* set status bits are cleared by writing 1 to them */ + outl(reg16, pmbase + ALT_GP_SMI_STS); + + return reg16; +} + +static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts) +{ + int i; + printk(BIOS_DEBUG, "ALT_GP_SMI_STS: "); + for (i=15; i<= 0; i--) { + if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", (i-16)); + } + printk(BIOS_DEBUG, "\n"); +} + + + +/** + * @brief read and clear TCOx_STS + * @return TCOx_STS registers + */ +static u32 reset_tco_status(void) +{ + u32 tcobase = pmbase + 0x60; + u32 reg32; + + reg32 = inl(tcobase + 0x04); + /* set status bits are cleared by writing 1 to them */ + outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS + if (reg32 & (1 << 18)) + outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS + + return reg32; +} + + +static void dump_tco_status(u32 tco_sts) +{ + printk(BIOS_DEBUG, "TCO_STS: "); + if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); + if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); + if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); + if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); + if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); + if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); + if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); + if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); + if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); + if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); + if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); + if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); + if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); + printk(BIOS_DEBUG, "\n"); +} + + + +/** + * @brief Set the EOS bit + */ +static void smi_set_eos(void) +{ + u8 reg8; + + reg8 = inb(pmbase + SMI_EN); + reg8 |= EOS; + outb(reg8, pmbase + SMI_EN); +} + +extern uint8_t smm_relocation_start, smm_relocation_end; + +static void smm_relocate(void) +{ + u32 smi_en; + u16 pm1_en; + u32 gpe0_en; + + printk(BIOS_DEBUG, "Initializing SMM handler..."); + + pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + PMBASE) & 0xff80; + + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); + + smi_en = inl(pmbase + SMI_EN); + if (smi_en & APMC_EN) { + printk(BIOS_INFO, "SMI# handler already enabled?\n"); + return; + } + + /* copy the SMM relocation code */ + memcpy((void *)0x38000, &smm_relocation_start, + &smm_relocation_end - &smm_relocation_start); + + printk(BIOS_DEBUG, "\n"); + dump_smi_status(reset_smi_status()); + dump_pm1_status(reset_pm1_status()); + dump_gpe0_status(reset_gpe0_status()); + dump_alt_gp_smi_status(reset_alt_gp_smi_status()); + dump_tco_status(reset_tco_status()); + + /* Disable GPE0 PME_B0 */ + gpe0_en = inl(pmbase + GPE0_EN); + gpe0_en &= ~PME_B0_EN; + outl(gpe0_en, pmbase + GPE0_EN); + + pm1_en = 0; + pm1_en |= PWRBTN_EN; + pm1_en |= GBL_EN; + outw(pm1_en, pmbase + PM1_EN); + + /* Enable SMI generation: + * - on TCO events + * - on APMC writes (io 0xb2) + * - on writes to SLP_EN (sleep states) + * - on writes to GBL_RLS (bios commands) + * No SMIs: + * - on microcontroller writes (io 0x62/0x66) + */ + + smi_en = 0; /* reset SMI enables */ + +#if 0 + smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN; +#endif + smi_en |= TCO_EN; + smi_en |= APMC_EN; +#if DEBUG_PERIODIC_SMIS + /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using + * periodic SMIs. + */ + smi_en |= PERIODIC_EN; +#endif + smi_en |= SLP_SMI_EN; +#if 0 + smi_en |= BIOS_EN; +#endif + + /* The following need to be on for SMIs to happen */ + smi_en |= EOS | GBL_SMI_EN; + + outl(smi_en, pmbase + SMI_EN); + + /** + * There are several methods of raising a controlled SMI# via + * software, among them: + * - Writes to io 0xb2 (APMC) + * - Writes to the Local Apic ICR with Delivery mode SMI. + * + * Using the local apic is a bit more tricky. According to + * AMD Family 11 Processor BKDG no destination shorthand must be + * used. + * The whole SMM initialization is quite a bit hardware specific, so + * I'm not too worried about the better of the methods at the moment + */ + + /* raise an SMI interrupt */ + printk(BIOS_SPEW, " ... raise SMI#\n"); + outb(0x00, 0xb2); +} + +static int smm_handler_copied = 0; + +static void smm_install(void) +{ + device_t dev = dev_find_slot(0, PCI_DEVFN(0, 0)); + u32 smm_base = 0xa0000; + struct ied_header ied = { + .signature = "INTEL RSVD", + .size = IED_SIZE, + .reserved = {0}, + }; + + /* The first CPU running this gets to copy the SMM handler. But not all + * of them. + */ + if (smm_handler_copied) + return; + smm_handler_copied = 1; + + /* enable the SMM memory window */ + pci_write_config8(dev, SMRAM, D_OPEN | G_SMRAME | C_BASE_SEG); + +#if CONFIG_SMM_TSEG + smm_base = pci_read_config32(dev, TSEG) & ~1; +#endif + + /* copy the real SMM handler */ + printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n", smm_base); + memcpy((void *)smm_base, &_binary_smm_start, (size_t)&_binary_smm_size); + + /* copy the IED header into place */ + if (CONFIG_SMM_TSEG_SIZE > IED_SIZE) { + /* Top of TSEG region */ + smm_base += CONFIG_SMM_TSEG_SIZE - IED_SIZE; + printk(BIOS_DEBUG, "Installing IED header to 0x%08x\n", + smm_base); + memcpy((void *)smm_base, &ied, sizeof(ied)); + } + wbinvd(); + + /* close the SMM memory window and enable normal SMM */ + pci_write_config8(dev, SMRAM, G_SMRAME | C_BASE_SEG); +} + +void smm_init(void) +{ +#if CONFIG_ELOG + /* Log events from chipset before clearing */ + pch_log_state(); +#endif + + /* Put SMM code to 0xa0000 */ + smm_install(); + + /* Put relocation code to 0x38000 and relocate SMBASE */ + smm_relocate(); + + /* We're done. Make sure SMIs can happen! */ + smi_set_eos(); +} + +void smm_lock(void) +{ + /* LOCK the SMM memory window and enable normal SMM. + * After running this function, only a full reset can + * make the SMM registers writable again. + */ + printk(BIOS_DEBUG, "Locking SMM.\n"); + pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, + D_LCK | G_SMRAME | C_BASE_SEG); +} + +void smm_setup_structures(void *gnvs, void *tcg, void *smi1) +{ + /* + * Issue SMI to set the gnvs pointer in SMM. + * tcg and smi1 are unused. + * + * EAX = APM_CNT_GNVS_UPDATE + * EBX = gnvs pointer + * EDX = APM_CNT + */ + asm volatile ( + "outb %%al, %%dx\n\t" + : /* ignore result */ + : "a" (APM_CNT_GNVS_UPDATE), + "b" ((u32)gnvs), + "d" (APM_CNT) + ); +} diff --git a/src/southbridge/intel/fsp_bd82x6x/smihandler.c b/src/southbridge/intel/fsp_bd82x6x/smihandler.c new file mode 100644 index 0000000..121854b --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/smihandler.c @@ -0,0 +1,798 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <types.h> +#include <arch/hlt.h> +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/cache.h> +#include <device/pci_def.h> +#include <cpu/x86/smm.h> +#include <elog.h> +#include <pc80/mc146818rtc.h> +#include "pch.h" + +#include "nvs.h" + +/* We are using PCIe accesses for now + * 1. the chipset can do it + * 2. we don't need to worry about how we leave 0xcf8/0xcfc behind + */ +#include <northbridge/intel/fsp_sandybridge/northbridge.h> + +/* While we read PMBASE dynamically in case it changed, let's + * initialize it with a sane value + */ +static u16 pmbase = DEFAULT_PMBASE; +u16 smm_get_pmbase(void) +{ + return pmbase; +} + +static u8 smm_initialized = 0; + +/* GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located + * by coreboot. + */ +static global_nvs_t *gnvs = (global_nvs_t *)0x0; +global_nvs_t *smm_get_gnvs(void) +{ + return gnvs; +} + +#if CONFIG_SMM_TSEG +static u32 tseg_base = 0; +u32 smi_get_tseg_base(void) +{ + if (!tseg_base) + tseg_base = pcie_read_config32(PCI_DEV(0, 0, 0), TSEG) & ~1; + return tseg_base; +} +void tseg_relocate(void **ptr) +{ + /* Adjust pointer with TSEG base */ + if (*ptr && *ptr < (void*)smi_get_tseg_base()) + *ptr = (void *)(((u8*)*ptr) + smi_get_tseg_base()); +} +#endif + +/** + * @brief read and clear PM1_STS + * @return PM1_STS register + */ +static u16 reset_pm1_status(void) +{ + u16 reg16; + + reg16 = inw(pmbase + PM1_STS); + /* set status bits are cleared by writing 1 to them */ + outw(reg16, pmbase + PM1_STS); + + return reg16; +} + +static void dump_pm1_status(u16 pm1_sts) +{ + printk(BIOS_SPEW, "PM1_STS: "); + if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK "); + if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK "); + if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR "); + if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC "); + if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN "); + if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL "); + if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM "); + if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF "); + printk(BIOS_SPEW, "\n"); + int reg16 = inw(pmbase + PM1_EN); + printk(BIOS_SPEW, "PM1_EN: %x\n", reg16); +} + +/** + * @brief read and clear SMI_STS + * @return SMI_STS register + */ +static u32 reset_smi_status(void) +{ + u32 reg32; + + reg32 = inl(pmbase + SMI_STS); + /* set status bits are cleared by writing 1 to them */ + outl(reg32, pmbase + SMI_STS); + + return reg32; +} + +static void dump_smi_status(u32 smi_sts) +{ + printk(BIOS_DEBUG, "SMI_STS: "); + if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); + if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); + if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); + if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); + if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); + if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); + if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); + if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); + if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); + if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); + if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); + if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); + if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); + if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); + if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); + if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); + if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); + if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); + if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); + printk(BIOS_DEBUG, "\n"); +} + + +/** + * @brief read and clear GPE0_STS + * @return GPE0_STS register + */ +static u32 reset_gpe0_status(void) +{ + u32 reg32; + + reg32 = inl(pmbase + GPE0_STS); + /* set status bits are cleared by writing 1 to them */ + outl(reg32, pmbase + GPE0_STS); + + return reg32; +} + +static void dump_gpe0_status(u32 gpe0_sts) +{ + int i; + printk(BIOS_DEBUG, "GPE0_STS: "); + for (i=31; i<= 16; i--) { + if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); + } + if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); + if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); + if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); + if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); + if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "BATLOW "); + if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); + if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); + if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); + if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); + if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); + if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); + if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); + if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "SWGPE "); + if (gpe0_sts & (1 << 1)) printk(BIOS_DEBUG, "HOTPLUG "); + if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); + printk(BIOS_DEBUG, "\n"); +} + + +/** + * @brief read and clear TCOx_STS + * @return TCOx_STS registers + */ +static u32 reset_tco_status(void) +{ + u32 tcobase = pmbase + 0x60; + u32 reg32; + + reg32 = inl(tcobase + 0x04); + /* set status bits are cleared by writing 1 to them */ + outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS + if (reg32 & (1 << 18)) + outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS + + return reg32; +} + + +static void dump_tco_status(u32 tco_sts) +{ + printk(BIOS_DEBUG, "TCO_STS: "); + if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); + if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); + if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); + if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); + if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); + if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); + if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); + if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); + if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); + if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); + if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); + if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); + if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); + printk(BIOS_DEBUG, "\n"); +} + +int southbridge_io_trap_handler(int smif) +{ + switch (smif) { + case 0x32: + printk(BIOS_DEBUG, "OS Init\n"); + /* gnvs->smif: + * On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + */ + gnvs->smif = 0; + return 1; /* IO trap handled */ + } + + /* Not handled */ + return 0; +} + +/** + * @brief Set the EOS bit + */ +void southbridge_smi_set_eos(void) +{ + u8 reg8; + + reg8 = inb(pmbase + SMI_EN); + reg8 |= EOS; + outb(reg8, pmbase + SMI_EN); +} + +static void busmaster_disable_on_bus(int bus) +{ + int slot, func; + unsigned int val; + unsigned char hdr; + + for (slot = 0; slot < 0x20; slot++) { + for (func = 0; func < 8; func++) { + u32 reg32; + device_t dev = PCI_DEV(bus, slot, func); + + val = pci_read_config32(dev, PCI_VENDOR_ID); + + if (val == 0xffffffff || val == 0x00000000 || + val == 0x0000ffff || val == 0xffff0000) + continue; + + /* Disable Bus Mastering for this one device */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 &= ~PCI_COMMAND_MASTER; + pci_write_config32(dev, PCI_COMMAND, reg32); + + /* If this is a bridge, then follow it. */ + hdr = pci_read_config8(dev, PCI_HEADER_TYPE); + hdr &= 0x7f; + if (hdr == PCI_HEADER_TYPE_BRIDGE || + hdr == PCI_HEADER_TYPE_CARDBUS) { + unsigned int buses; + buses = pci_read_config32(dev, PCI_PRIMARY_BUS); + busmaster_disable_on_bus((buses >> 8) & 0xff); + } + } + } +} + +/* + * Drive GPIO 60 low to gate memory reset in S3. + * + * Intel reference designs all use GPIO 60 but it is + * not a requirement and boards could use a different pin. + */ +static void southbridge_gate_memory_reset(void) +{ + u32 reg32; + u16 gpiobase; + + gpiobase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), GPIOBASE) & 0xfffc; + if (!gpiobase) + return; + + /* Make sure it is set as GPIO */ + reg32 = inl(gpiobase + GPIO_USE_SEL2); + if (!(reg32 & (1 << 28))) { + reg32 |= (1 << 28); + outl(reg32, gpiobase + GPIO_USE_SEL2); + } + + /* Make sure it is set as output */ + reg32 = inl(gpiobase + GP_IO_SEL2); + if (reg32 & (1 << 28)) { + reg32 &= ~(1 << 28); + outl(reg32, gpiobase + GP_IO_SEL2); + } + + /* Drive the output low */ + reg32 = inl(gpiobase + GP_LVL2); + reg32 &= ~(1 << 28); + outl(reg32, gpiobase + GP_LVL2); +} + +static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *state_save) +{ + u8 reg8; + u32 reg32; + u8 slp_typ; + u8 s5pwr = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; + + // save and recover RTC port values + u8 tmp70, tmp72; + tmp70 = inb(0x70); + tmp72 = inb(0x72); + get_option(&s5pwr, "power_on_after_fail"); + outb(tmp70, 0x70); + outb(tmp72, 0x72); + + void (*mainboard_sleep)(u8 slp_typ) = mainboard_smi_sleep; + + /* First, disable further SMIs */ + reg8 = inb(pmbase + SMI_EN); + reg8 &= ~SLP_SMI_EN; + outb(reg8, pmbase + SMI_EN); + + /* Figure out SLP_TYP */ + reg32 = inl(pmbase + PM1_CNT); + printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32); + slp_typ = (reg32 >> 10) & 7; + + /* Do any mainboard sleep handling */ + tseg_relocate((void **)&mainboard_sleep); + if (mainboard_sleep) + mainboard_sleep(slp_typ-2); + +#if CONFIG_ELOG_GSMI + /* Log S3, S4, and S5 entry */ + if (slp_typ >= 5) + elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ-2); +#endif + + /* Next, do the deed. + */ + + switch (slp_typ) { + case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break; + case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break; + case 5: + printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n"); + + /* Gate memory reset */ + southbridge_gate_memory_reset(); + + /* Invalidate the cache before going to S3 */ + wbinvd(); + break; + case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break; + case 7: + printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); + + outl(0, pmbase + GPE0_EN); + + /* Always set the flag in case CMOS was changed on runtime. For + * "KEEP", switch to "OFF" - KEEP is software emulated + */ + reg8 = pcie_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); + if (s5pwr == MAINBOARD_POWER_ON) { + reg8 &= ~1; + } else { + reg8 |= 1; + } + pcie_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); + + /* also iterates over all bridges on bus 0 */ + busmaster_disable_on_bus(0); + break; + default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break; + } + + /* Write back to the SLP register to cause the originally intended + * event again. We need to set BIT13 (SLP_EN) though to make the + * sleep happen. + */ + outl(reg32 | SLP_EN, pmbase + PM1_CNT); + + /* Make sure to stop executing code here for S3/S4/S5 */ + if (slp_typ > 1) + hlt(); + + /* In most sleep states, the code flow of this function ends at + * the line above. However, if we entered sleep state S1 and wake + * up again, we will continue to execute code in this function. + */ + reg32 = inl(pmbase + PM1_CNT); + if (reg32 & SCI_EN) { + /* The OS is not an ACPI OS, so we set the state to S0 */ + reg32 &= ~(SLP_EN | SLP_TYP); + outl(reg32, pmbase + PM1_CNT); + } +} + +/* + * Look for Synchronous IO SMI and use save state from that + * core in case we are not running on the same core that + * initiated the IO transaction. + */ +static em64t101_smm_state_save_area_t *smi_apmc_find_state_save(u8 cmd) +{ + em64t101_smm_state_save_area_t *state; + u32 base = smi_get_tseg_base() + 0x8000 + 0x7d00; + int node; + + /* Check all nodes looking for the one that issued the IO */ + for (node = 0; node < CONFIG_MAX_CPUS; node++) { + state = (em64t101_smm_state_save_area_t *) + (base - (node * 0x400)); + + /* Check for Synchronous IO (bit0==1) */ + if (!(state->io_misc_info & (1 << 0))) + continue; + + /* Make sure it was a write (bit4==0) */ + if (state->io_misc_info & (1 << 4)) + continue; + + /* Check for APMC IO port */ + if (((state->io_misc_info >> 16) & 0xff) != APM_CNT) + continue; + + /* Check AX against the requested command */ + if ((state->rax & 0xff) != cmd) + continue; + + return state; + } + + return NULL; +} + +#if CONFIG_ELOG_GSMI +static void southbridge_smi_gsmi(void) +{ + u32 *ret, *param; + u8 sub_command; + em64t101_smm_state_save_area_t *io_smi = + smi_apmc_find_state_save(ELOG_GSMI_APM_CNT); + + if (!io_smi) + return; + + /* Command and return value in EAX */ + ret = (u32*)&io_smi->rax; + sub_command = (u8)(*ret >> 8); + + /* Parameter buffer in EBX */ + param = (u32*)&io_smi->rbx; + + /* drivers/elog/gsmi.c */ + *ret = gsmi_exec(sub_command, param); +} +#endif + +static void southbridge_smi_apmc(unsigned int node, smm_state_save_area_t *state_save) +{ + u32 pmctrl; + u8 reg8; + int (*mainboard_apmc)(u8 apmc) = mainboard_smi_apmc; + em64t101_smm_state_save_area_t *state; + + /* Emulate B2 register as the FADT / Linux expects it */ + + reg8 = inb(APM_CNT); + switch (reg8) { + case APM_CNT_CST_CONTROL: + /* Calling this function seems to cause + * some kind of race condition in Linux + * and causes a kernel oops + */ + printk(BIOS_DEBUG, "C-state control\n"); + break; + case APM_CNT_PST_CONTROL: + /* Calling this function seems to cause + * some kind of race condition in Linux + * and causes a kernel oops + */ + printk(BIOS_DEBUG, "P-state control\n"); + break; + case APM_CNT_ACPI_DISABLE: + pmctrl = inl(pmbase + PM1_CNT); + pmctrl &= ~SCI_EN; + outl(pmctrl, pmbase + PM1_CNT); + printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n"); + break; + case APM_CNT_ACPI_ENABLE: + pmctrl = inl(pmbase + PM1_CNT); + pmctrl |= SCI_EN; + outl(pmctrl, pmbase + PM1_CNT); + printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n"); + break; + case APM_CNT_GNVS_UPDATE: + if (smm_initialized) { + printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n"); + return; + } + state = smi_apmc_find_state_save(reg8); + if (state) { + /* EBX in the state save contains the GNVS pointer */ + gnvs = (global_nvs_t *)((u32)state->rbx); + smm_initialized = 1; + printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs); + } + break; +#if CONFIG_ELOG_GSMI + case ELOG_GSMI_APM_CNT: + southbridge_smi_gsmi(); + break; +#endif + } + + tseg_relocate((void **)&mainboard_apmc); + if (mainboard_apmc) + mainboard_apmc(reg8); +} + +static void southbridge_smi_pm1(unsigned int node, smm_state_save_area_t *state_save) +{ + u16 pm1_sts; + + pm1_sts = reset_pm1_status(); + dump_pm1_status(pm1_sts); + + /* While OSPM is not active, poweroff immediately + * on a power button event. + */ + if (pm1_sts & PWRBTN_STS) { + // power button pressed + u32 reg32; + reg32 = (7 << 10) | (1 << 13); +#if CONFIG_ELOG_GSMI + elog_add_event(ELOG_TYPE_POWER_BUTTON); +#endif + outl(reg32, pmbase + PM1_CNT); + } +} + +static void southbridge_smi_gpe0(unsigned int node, smm_state_save_area_t *state_save) +{ + u32 gpe0_sts; + + gpe0_sts = reset_gpe0_status(); + dump_gpe0_status(gpe0_sts); +} + +static void southbridge_smi_gpi(unsigned int node, smm_state_save_area_t *state_save) +{ + void (*mainboard_gpi)(u16 gpi_sts) = mainboard_smi_gpi; + u16 reg16; + reg16 = inw(pmbase + ALT_GP_SMI_STS); + outw(reg16, pmbase + ALT_GP_SMI_STS); + + reg16 &= inw(pmbase + ALT_GP_SMI_EN); + + tseg_relocate((void **)&mainboard_gpi); + if (mainboard_gpi) { + mainboard_gpi(reg16); + } else { + if (reg16) + printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16); + } + + outw(reg16, pmbase + ALT_GP_SMI_STS); +} + +static void southbridge_smi_mc(unsigned int node, smm_state_save_area_t *state_save) +{ + u32 reg32; + + reg32 = inl(pmbase + SMI_EN); + + /* Are periodic SMIs enabled? */ + if ((reg32 & MCSMI_EN) == 0) + return; + + printk(BIOS_DEBUG, "Microcontroller SMI.\n"); +} + + + +static void southbridge_smi_tco(unsigned int node, smm_state_save_area_t *state_save) +{ + u32 tco_sts; + + tco_sts = reset_tco_status(); + + /* Any TCO event? */ + if (!tco_sts) + return; + + if (tco_sts & (1 << 8)) { // BIOSWR + u8 bios_cntl; + + bios_cntl = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc); + + if (bios_cntl & 1) { + /* BWE is RW, so the SMI was caused by a + * write to BWE, not by a write to the BIOS + */ + + /* This is the place where we notice someone + * is trying to tinker with the BIOS. We are + * trying to be nice and just ignore it. A more + * resolute answer would be to power down the + * box. + */ + printk(BIOS_DEBUG, "Switching back to RO\n"); + pcie_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1)); + } /* No else for now? */ + } else if (tco_sts & (1 << 3)) { /* TIMEOUT */ + /* Handle TCO timeout */ + printk(BIOS_DEBUG, "TCO Timeout.\n"); + } else if (!tco_sts) { + dump_tco_status(tco_sts); + } +} + +static void southbridge_smi_periodic(unsigned int node, smm_state_save_area_t *state_save) +{ + u32 reg32; + + reg32 = inl(pmbase + SMI_EN); + + /* Are periodic SMIs enabled? */ + if ((reg32 & PERIODIC_EN) == 0) + return; + + printk(BIOS_DEBUG, "Periodic SMI.\n"); +} + +static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *state_save) +{ +#define IOTRAP(x) (trap_sts & (1 << x)) + u32 trap_sts, trap_cycle; + u32 data, mask = 0; + int i; + + trap_sts = RCBA32(0x1e00); // TRSR - Trap Status Register + RCBA32(0x1e00) = trap_sts; // Clear trap(s) in TRSR + + trap_cycle = RCBA32(0x1e10); + for (i=16; i<20; i++) { + if (trap_cycle & (1 << i)) + mask |= (0xff << ((i - 16) << 2)); + } + + + /* IOTRAP(3) SMI function call */ + if (IOTRAP(3)) { + if (gnvs && gnvs->smif) + io_trap_handler(gnvs->smif); // call function smif + return; + } + + /* IOTRAP(2) currently unused + * IOTRAP(1) currently unused */ + + /* IOTRAP(0) SMIC */ + if (IOTRAP(0)) { + if (!(trap_cycle & (1 << 24))) { // It's a write + printk(BIOS_DEBUG, "SMI1 command\n"); + data = RCBA32(0x1e18); + data &= mask; + // if (smi1) + // southbridge_smi_command(data); + // return; + } + // Fall through to debug + } + + printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); + printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); + printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); + + if (!(trap_cycle & (1 << 24))) { + /* Write Cycle */ + data = RCBA32(0x1e18); + printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data); + } +#undef IOTRAP +} + +typedef void (*smi_handler_t)(unsigned int node, + smm_state_save_area_t *state_save); + +static smi_handler_t southbridge_smi[32] = { + NULL, // [0] reserved + NULL, // [1] reserved + NULL, // [2] BIOS_STS + NULL, // [3] LEGACY_USB_STS + southbridge_smi_sleep, // [4] SLP_SMI_STS + southbridge_smi_apmc, // [5] APM_STS + NULL, // [6] SWSMI_TMR_STS + NULL, // [7] reserved + southbridge_smi_pm1, // [8] PM1_STS + southbridge_smi_gpe0, // [9] GPE0_STS + southbridge_smi_gpi, // [10] GPI_STS + southbridge_smi_mc, // [11] MCSMI_STS + NULL, // [12] DEVMON_STS + southbridge_smi_tco, // [13] TCO_STS + southbridge_smi_periodic, // [14] PERIODIC_STS + NULL, // [15] SERIRQ_SMI_STS + NULL, // [16] SMBUS_SMI_STS + NULL, // [17] LEGACY_USB2_STS + NULL, // [18] INTEL_USB2_STS + NULL, // [19] reserved + NULL, // [20] PCI_EXP_SMI_STS + southbridge_smi_monitor, // [21] MONITOR_STS + NULL, // [22] reserved + NULL, // [23] reserved + NULL, // [24] reserved + NULL, // [25] EL_SMI_STS + NULL, // [26] SPI_STS + NULL, // [27] reserved + NULL, // [28] reserved + NULL, // [29] reserved + NULL, // [30] reserved + NULL // [31] reserved +}; + +/** + * @brief Interrupt handler for SMI# + * + * @param smm_revision revision of the smm state save map + */ + +void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save) +{ + int i, dump = 0; + u32 smi_sts; + + /* Update global variable pmbase */ + pmbase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + + /* We need to clear the SMI status registers, or we won't see what's + * happening in the following calls. + */ + smi_sts = reset_smi_status(); + + /* Call SMI sub handler for each of the status bits */ + for (i = 0; i < 31; i++) { + if (smi_sts & (1 << i)) { + if (southbridge_smi[i]) { +#if CONFIG_SMM_TSEG + smi_handler_t handler = (smi_handler_t) + ((u8*)southbridge_smi[i] + + smi_get_tseg_base()); + if (handler) + handler(node, state_save); +#else + southbridge_smi[i](node, state_save); +#endif + } else { + printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no " + "handler available.\n", i); + dump = 1; + } + } + } + + if(dump) { + dump_smi_status(smi_sts); + } + +} diff --git a/src/southbridge/intel/fsp_bd82x6x/spi.c b/src/southbridge/intel/fsp_bd82x6x/spi.c new file mode 100644 index 0000000..887463a --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/spi.c @@ -0,0 +1,751 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* This file is derived from the flashrom project. */ +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <delay.h> +#include <arch/io.h> +#include <console/console.h> +#include <device/pci_ids.h> + +#include <spi-generic.h> + +static int ich_status_poll(u16 bitmask, int wait_til_set); + +#define min(a, b) ((a)<(b)?(a):(b)) + +#ifdef __SMM__ +#include <arch/pci_mmio_cfg.h> +#define pci_read_config_byte(dev, reg, targ)\ + *(targ) = pci_read_config8(dev, reg) +#define pci_read_config_word(dev, reg, targ)\ + *(targ) = pci_read_config16(dev, reg) +#define pci_read_config_dword(dev, reg, targ)\ + *(targ) = pci_read_config32(dev, reg) +#define pci_write_config_byte(dev, reg, val)\ + pci_write_config8(dev, reg, val) +#define pci_write_config_word(dev, reg, val)\ + pci_write_config16(dev, reg, val) +#define pci_write_config_dword(dev, reg, val)\ + pci_write_config32(dev, reg, val) +#else /* !__SMM__ */ +#include <device/device.h> +#include <device/pci.h> +#define pci_read_config_byte(dev, reg, targ)\ + *(targ) = pci_read_config8(dev, reg) +#define pci_read_config_word(dev, reg, targ)\ + *(targ) = pci_read_config16(dev, reg) +#define pci_read_config_dword(dev, reg, targ)\ + *(targ) = pci_read_config32(dev, reg) +#define pci_write_config_byte(dev, reg, val)\ + pci_write_config8(dev, reg, val) +#define pci_write_config_word(dev, reg, val)\ + pci_write_config16(dev, reg, val) +#define pci_write_config_dword(dev, reg, val)\ + pci_write_config32(dev, reg, val) +#endif /* !__SMM__ */ + +typedef struct spi_slave ich_spi_slave; + +static int ichspi_lock = 0; + +typedef struct ich7_spi_regs { + uint16_t spis; + uint16_t spic; + uint32_t spia; + uint64_t spid[8]; + uint64_t _pad; + uint32_t bbar; + uint16_t preop; + uint16_t optype; + uint8_t opmenu[8]; +} __attribute__((packed)) ich7_spi_regs; + +typedef struct ich9_spi_regs { + uint32_t bfpr; // 0 + uint16_t hsfs; // 4 + uint16_t hsfc; // 6 + uint32_t faddr; // 8 + uint32_t _reserved0; // 0xC + uint32_t fdata[16]; // 0x10 + uint32_t frap; // 0x50 + uint32_t freg[5]; // 0x54 + uint32_t _reserved1[3]; // 0x67 + uint32_t pr[5]; // 0x74 + uint32_t _reserved2[2]; // 0x88 + uint8_t ssfs; // 0x90 + uint8_t ssfc[3]; // 0x91 + uint16_t preop; // 0x94 + uint16_t optype; // 0x96 + uint8_t opmenu[8]; // 0x98 + uint32_t bbar; // 0xB0 + uint8_t _reserved3[12]; + uint32_t fdoc; + uint32_t fdod; + uint8_t _reserved4[8]; + uint32_t afc; + uint32_t lvscc; + uint32_t uvscc; + uint8_t _reserved5[4]; + uint32_t fpb; + uint8_t _reserved6[28]; + uint32_t srdl; + uint32_t srdc; + uint32_t srd; +} __attribute__((packed)) ich9_spi_regs; + +typedef struct ich_spi_controller { + int locked; + + uint8_t *opmenu; + int menubytes; + uint16_t *preop; + uint16_t *optype; + uint32_t *addr; + uint8_t *data; + unsigned databytes; + uint8_t *status; + uint16_t *control; + uint32_t *bbar; +} ich_spi_controller; + +static ich_spi_controller cntlr; + +enum { + SPIS_SCIP = 0x0001, + SPIS_GRANT = 0x0002, + SPIS_CDS = 0x0004, + SPIS_FCERR = 0x0008, + SSFS_AEL = 0x0010, + SPIS_LOCK = 0x8000, + SPIS_RESERVED_MASK = 0x7ff0, + SSFS_RESERVED_MASK = 0x7fe2 +}; + +enum { + SPIC_SCGO = 0x000002, + SPIC_ACS = 0x000004, + SPIC_SPOP = 0x000008, + SPIC_DBC = 0x003f00, + SPIC_DS = 0x004000, + SPIC_SME = 0x008000, + SSFC_SCF_MASK = 0x070000, + SSFC_RESERVED = 0xf80000 +}; + +enum { + HSFS_FDONE = 0x0001, + HSFS_FCERR = 0x0002, + HSFS_AEL = 0x0004, + HSFS_BERASE_MASK = 0x0018, + HSFS_BERASE_SHIFT = 3, + HSFS_SCIP = 0x0020, + HSFS_FDOPSS = 0x2000, + HSFS_FDV = 0x4000, + HSFS_FLOCKDN = 0x8000 +}; + +enum { + HSFC_FGO = 0x0001, + HSFC_FCYCLE_MASK = 0x0006, + HSFC_FCYCLE_SHIFT = 1, + HSFC_FDBC_MASK = 0x3f00, + HSFC_FDBC_SHIFT = 8, + HSFC_FSMIE = 0x8000 +}; + +enum { + SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0, + SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1, + SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2, + SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3, +}; + +#if CONFIG_DEBUG_SPI_FLASH + +static u8 readb_(const void *addr) +{ + u8 v = read8((unsigned long)addr); + printk(BIOS_DEBUG, "read %02x from %p\n", + v, addr); + return v; +} + +static u16 readw_(const void *addr) +{ + u16 v = read16((unsigned long)addr); + printk(BIOS_DEBUG, "read %04x from %p\n", + v, addr); + return v; +} + +static u32 readl_(const void *addr) +{ + u32 v = read32((unsigned long)addr); + printk(BIOS_DEBUG, "read %08x from %p\n", + v, addr); + return v; +} + +static void writeb_(u8 b, const void *addr) +{ + write8((unsigned long)addr, b); + printk(BIOS_DEBUG, "wrote %02x to %p\n", + b, addr); +} + +static void writew_(u16 b, const void *addr) +{ + write16((unsigned long)addr, b); + printk(BIOS_DEBUG, "wrote %04x to %p\n", + b, addr); +} + +static void writel_(u32 b, const void *addr) +{ + write32((unsigned long)addr, b); + printk(BIOS_DEBUG, "wrote %08x to %p\n", + b, addr); +} + +#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */ + +#define readb_(a) read8((uint32_t)a) +#define readw_(a) read16((uint32_t)a) +#define readl_(a) read32((uint32_t)a) +#define writeb_(val, addr) write8((uint32_t)addr, val) +#define writew_(val, addr) write16((uint32_t)addr, val) +#define writel_(val, addr) write32((uint32_t)addr, val) + +#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */ + +static void write_reg(const void *value, void *dest, uint32_t size) +{ + const uint8_t *bvalue = value; + uint8_t *bdest = dest; + + while (size >= 4) { + writel_(*(const uint32_t *)bvalue, bdest); + bdest += 4; bvalue += 4; size -= 4; + } + while (size) { + writeb_(*bvalue, bdest); + bdest++; bvalue++; size--; + } +} + +static void read_reg(const void *src, void *value, uint32_t size) +{ + const uint8_t *bsrc = src; + uint8_t *bvalue = value; + + while (size >= 4) { + *(uint32_t *)bvalue = readl_(bsrc); + bsrc += 4; bvalue += 4; size -= 4; + } + while (size) { + *bvalue = readb_(bsrc); + bsrc++; bvalue++; size--; + } +} + +static void ich_set_bbar(uint32_t minaddr) +{ + const uint32_t bbar_mask = 0x00ffff00; + uint32_t ichspi_bbar; + + minaddr &= bbar_mask; + ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask; + ichspi_bbar |= minaddr; + writel_(ichspi_bbar, cntlr.bbar); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + printk(BIOS_DEBUG, "spi_cs_is_valid used but not implemented\n"); + return 0; +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + ich_spi_slave *slave = malloc(sizeof(*slave)); + + if (!slave) { + printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n"); + return NULL; + } + + memset(slave, 0, sizeof(*slave)); + + slave->bus = bus; + slave->cs = cs; + return slave; +} + +/* + * Check if this device ID matches one of supported Intel PCH devices. + * + * Return the ICH version if there is a match, or zero otherwise. + */ +static inline int get_ich_version(uint16_t device_id) +{ + if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC) + return 7; + + if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && + device_id <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) || + (device_id >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN && + device_id <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) + return 9; + + return 0; +} + +void spi_init(void) +{ + int ich_version = 0; + + uint8_t *rcrb; /* Root Complex Register Block */ + uint32_t rcba; /* Root Complex Base Address */ + uint8_t bios_cntl; + device_t dev; + uint32_t ids; + uint16_t vendor_id, device_id; + +#ifdef __SMM__ + dev = PCI_DEV(0, 31, 0); +#else + dev = dev_find_slot(0, PCI_DEVFN(31, 0)); +#endif + pci_read_config_dword(dev, 0, &ids); + vendor_id = ids; + device_id = (ids >> 16); + + if (vendor_id != PCI_VENDOR_ID_INTEL) { + printk(BIOS_DEBUG, "ICH SPI: No ICH found.\n"); + return; + } + + ich_version = get_ich_version(device_id); + + if (!ich_version) { + printk(BIOS_DEBUG, "ICH SPI: No known ICH found.\n"); + return; + } + + pci_read_config_dword(dev, 0xf0, &rcba); + /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */ + rcrb = (uint8_t *)(rcba & 0xffffc000); + switch (ich_version) { + case 7: + { + const uint16_t ich7_spibar_offset = 0x3020; + ich7_spi_regs *ich7_spi = + (ich7_spi_regs *)(rcrb + ich7_spibar_offset); + + ichspi_lock = readw_(&ich7_spi->spis) & SPIS_LOCK; + cntlr.opmenu = ich7_spi->opmenu; + cntlr.menubytes = sizeof(ich7_spi->opmenu); + cntlr.optype = &ich7_spi->optype; + cntlr.addr = &ich7_spi->spia; + cntlr.data = (uint8_t *)ich7_spi->spid; + cntlr.databytes = sizeof(ich7_spi->spid); + cntlr.status = (uint8_t *)&ich7_spi->spis; + cntlr.control = &ich7_spi->spic; + cntlr.bbar = &ich7_spi->bbar; + cntlr.preop = &ich7_spi->preop; + break; + } + case 9: + { + const uint16_t ich9_spibar_offset = 0x3800; + ich9_spi_regs *ich9_spi = + (ich9_spi_regs *)(rcrb + ich9_spibar_offset); + ichspi_lock = readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN; + cntlr.opmenu = ich9_spi->opmenu; + cntlr.menubytes = sizeof(ich9_spi->opmenu); + cntlr.optype = &ich9_spi->optype; + cntlr.addr = &ich9_spi->faddr; + cntlr.data = (uint8_t *)ich9_spi->fdata; + cntlr.databytes = sizeof(ich9_spi->fdata); + cntlr.status = &ich9_spi->ssfs; + cntlr.control = (uint16_t *)ich9_spi->ssfc; + cntlr.bbar = &ich9_spi->bbar; + cntlr.preop = &ich9_spi->preop; + break; + } + default: + printk(BIOS_DEBUG, "ICH SPI: Unrecognized ICH version %d.\n", ich_version); + } + + ich_set_bbar(0); + + /* Disable the BIOS write protect so write commands are allowed. */ + pci_read_config_byte(dev, 0xdc, &bios_cntl); + switch (ich_version) { + case 9: + /* Deassert SMM BIOS Write Protect Disable. */ + bios_cntl &= ~(1 << 5); + break; + + default: + break; + } + pci_write_config_byte(dev, 0xdc, bios_cntl | 0x1); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +void spi_cs_activate(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +typedef struct spi_transaction { + const uint8_t *out; + uint32_t bytesout; + uint8_t *in; + uint32_t bytesin; + uint8_t type; + uint8_t opcode; + uint32_t offset; +} spi_transaction; + +static inline void spi_use_out(spi_transaction *trans, unsigned bytes) +{ + trans->out += bytes; + trans->bytesout -= bytes; +} + +static inline void spi_use_in(spi_transaction *trans, unsigned bytes) +{ + trans->in += bytes; + trans->bytesin -= bytes; +} + +static void spi_setup_type(spi_transaction *trans) +{ + trans->type = 0xFF; + + /* Try to guess spi type from read/write sizes. */ + if (trans->bytesin == 0) { + if (trans->bytesout >= 4) + /* + * If bytesin = 0 and bytesout > 4, we presume this is + * a write data operation, which is accompanied by an + * address. + */ + trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS; + else + trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; + return; + } + + if (trans->bytesout == 1) { /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; + return; + } + + if (trans->bytesout == 4) { /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + } + + /* Fast read command is called with 5 bytes instead of 4 */ + if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) { + trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + --trans->bytesout; + } +} + +static int spi_setup_opcode(spi_transaction *trans) +{ + uint16_t optypes; + uint8_t opmenu[cntlr.menubytes]; + + trans->opcode = trans->out[0]; + + /* Write Enable is handled as atomic prefix */ + if (trans->opcode == SPI_OPCODE_WREN) + return 0; + + spi_use_out(trans, 1); + if (!ichspi_lock) { + /* The lock is off, so just use index 0. */ + writeb_(trans->opcode, cntlr.opmenu); + optypes = readw_(cntlr.optype); + optypes = (optypes & 0xfffc) | (trans->type & 0x3); + writew_(optypes, cntlr.optype); + return 0; + } else { + /* The lock is on. See if what we need is on the menu. */ + uint8_t optype; + uint16_t opcode_index; + + read_reg(cntlr.opmenu, opmenu, sizeof(opmenu)); + for (opcode_index = 0; opcode_index < cntlr.menubytes; + opcode_index++) { + if (opmenu[opcode_index] == trans->opcode) + break; + } + + if (opcode_index == cntlr.menubytes) { + printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n", + trans->opcode); + return -1; + } + + optypes = readw_(cntlr.optype); + optype = (optypes >> (opcode_index * 2)) & 0x3; + if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && + optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && + trans->bytesout >= 3) { + /* We guessed wrong earlier. Fix it up. */ + trans->type = optype; + } + if (optype != trans->type) { + printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n", + optype); + return -1; + } + return opcode_index; + } +} + +static int spi_setup_offset(spi_transaction *trans) +{ + /* Separate the SPI address and data. */ + switch (trans->type) { + case SPI_OPCODE_TYPE_READ_NO_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS: + return 0; + case SPI_OPCODE_TYPE_READ_WITH_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS: + trans->offset = ((uint32_t)trans->out[0] << 16) | + ((uint32_t)trans->out[1] << 8) | + ((uint32_t)trans->out[2] << 0); + spi_use_out(trans, 3); + return 1; + default: + printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type); + return -1; + } +} + +/* + * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set + * below is True) or 0. In case the wait was for the bit(s) to set - write + * those bits back, which would cause resetting them. + * + * Return the last read status value on success or -1 on failure. + */ +static int ich_status_poll(u16 bitmask, int wait_til_set) +{ + int timeout = 6000; /* This will result in 60 ms */ + u16 status = 0; + + while (timeout--) { + status = readb_(cntlr.status); + if (wait_til_set ^ ((status & bitmask) == 0)) { + if (wait_til_set) + writeb_((status & bitmask), cntlr.status); + return status; + } + udelay(10); + } + + printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n", + status, bitmask); + return -1; +} + +int spi_xfer(struct spi_slave *slave, const void *dout, + unsigned int bitsout, void *din, unsigned int bitsin) +{ + uint16_t control; + int16_t opcode_index; + int with_address; + int status; + + spi_transaction trans = { + dout, bitsout / 8, + din, bitsin / 8, + 0xff, 0xff, 0 + }; + + /* There has to always at least be an opcode. */ + if (!bitsout || !dout) { + printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n"); + return -1; + } + /* Make sure if we read something we have a place to put it. */ + if (bitsin != 0 && !din) { + printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n"); + return -1; + } + /* Right now we don't support writing partial bytes. */ + if (bitsout % 8 || bitsin % 8) { + printk(BIOS_DEBUG, "ICH SPI: Accessing partial bytes not supported\n"); + return -1; + } + + if (ich_status_poll(SPIS_SCIP, 0) == -1) + return -1; + + writew_(SPIS_CDS | SPIS_FCERR, cntlr.status); + + spi_setup_type(&trans); + if ((opcode_index = spi_setup_opcode(&trans)) < 0) + return -1; + if ((with_address = spi_setup_offset(&trans)) < 0) + return -1; + + if (trans.opcode == SPI_OPCODE_WREN) { + /* + * Treat Write Enable as Atomic Pre-Op if possible + * in order to prevent the Management Engine from + * issuing a transaction between WREN and DATA. + */ + if (!ichspi_lock) + writew_(trans.opcode, cntlr.preop); + + return 0; + } + + /* Preset control fields */ + control = SPIC_SCGO | ((opcode_index & 0x07) << 4); + + /* Issue atomic preop cycle if needed */ + if (readw_(cntlr.preop)) + control |= SPIC_ACS; + + if (!trans.bytesout && !trans.bytesin) { + /* SPI addresses are 24 bit only */ + if (with_address) + writel_(trans.offset & 0x00FFFFFF, cntlr.addr); + + /* + * This is a 'no data' command (like Write Enable), its + * bitesout size was 1, decremented to zero while executing + * spi_setup_opcode() above. Tell the chip to send the + * command. + */ + writew_(control, cntlr.control); + + /* wait for the result */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n"); + return -1; + } + + goto spi_xfer_exit; + } + + /* + * Check if this is a write command attempting to transfer more bytes + * than the controller can handle. Iterations for writes are not + * supported here because each SPI write command needs to be preceded + * and followed by other SPI commands, and this sequence is controlled + * by the SPI chip driver. + */ + if (trans.bytesout > cntlr.databytes) { + printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use" + " CONTROLLER_PAGE_LIMIT?\n"); + return -1; + } + + /* + * Read or write up to databytes bytes at a time until everything has + * been sent. + */ + while (trans.bytesout || trans.bytesin) { + uint32_t data_length; + + /* SPI addresses are 24 bit only */ + if (with_address) + writel_(trans.offset & 0x00FFFFFF, cntlr.addr); + + if (trans.bytesout) + data_length = min(trans.bytesout, cntlr.databytes); + else + data_length = min(trans.bytesin, cntlr.databytes); + + /* Program data into FDATA0 to N */ + if (trans.bytesout) { + write_reg(trans.out, cntlr.data, data_length); + spi_use_out(&trans, data_length); + if (with_address) + trans.offset += data_length; + } + + /* Add proper control fields' values */ + control &= ~((cntlr.databytes - 1) << 8); + control |= SPIC_DS; + control |= (data_length - 1) << 8; + + /* write it */ + writew_(control, cntlr.control); + + /* Wait for Cycle Done Status or Flash Cycle Error. */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n"); + return -1; + } + + if (trans.bytesin) { + read_reg(cntlr.data, trans.in, data_length + 1); + spi_use_in(&trans, data_length); + if (with_address) + trans.offset += data_length; + } + } + +spi_xfer_exit: + /* Clear atomic preop now that xfer is done */ + writew_(0, cntlr.preop); + + return 0; +} diff --git a/src/southbridge/intel/fsp_bd82x6x/watchdog.c b/src/southbridge/intel/fsp_bd82x6x/watchdog.c new file mode 100644 index 0000000..362e896 --- /dev/null +++ b/src/southbridge/intel/fsp_bd82x6x/watchdog.c @@ -0,0 +1,59 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <watchdog.h> + + // + // Disable PCH Watchdog timer at SB_RCBA+0x3410 + // + // Mmio32((MmPci32(0, 0, 0x1F, 0, 0xF0) & ~BIT0), 0x3410) |= 0x20; + // +void watchdog_off(void) +{ + device_t dev; + unsigned long value, base; + + /* Turn off the ICH7 watchdog. */ + dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0)); + + /* Enable I/O space. */ + value = pci_read_config16(dev, 0x04); + value |= (1 << 10); + pci_write_config16(dev, 0x04, value); + + /* Get TCO base. */ + base = (pci_read_config32(dev, 0x40) & 0x0fffe) + 0x60; + + /* Disable the watchdog timer. */ + value = inw(base + 0x08); + value |= 1 << 11; + outw(value, base + 0x08); + + /* Clear TCO timeout status. */ + outw(0x0008, base + 0x04); + outw(0x0002, base + 0x06); + + printk(BIOS_DEBUG, "PCH watchdog disabled\n"); +}

1 0

Patch set updated for coreboot: 8975fbb Add the Intel FSP 206ax CPU core support
by Marc Jones 20 Nov '13

20 Nov '13

Marc Jones (marc.jones(a)se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4016 -gerrit commit 8975fbbf03bb5bc9195a3fee0f0eb3d3a90ebc8e Author: Marc Jones <marc.jones(a)se-eng.com> Date: Tue Oct 29 17:46:54 2013 -0600 Add the Intel FSP 206ax CPU core support Add support for 206ax using the Intel FSP. The FSP is different enough to warrant its own source files for now. It has different CAR code, micorcode, and FSP inclusion. It may be possible to combine this code with the mrc based solution used by the chromebooks in the future. Change-Id: I5105631af34e9c3a804ace908c4205f073abb9b4 Signed-off-by: Marc Jones <marc.jones(a)se-eng.com> --- src/cpu/Kconfig | 39 +- src/cpu/Makefile.inc | 8 +- src/cpu/intel/Kconfig | 1 + src/cpu/intel/Makefile.inc | 2 + src/cpu/intel/fsp_model_206ax/Kconfig | 93 +++++ src/cpu/intel/fsp_model_206ax/Makefile.inc | 12 + src/cpu/intel/fsp_model_206ax/acpi.c | 364 +++++++++++++++++++ src/cpu/intel/fsp_model_206ax/acpi/cpu.asl | 102 ++++++ src/cpu/intel/fsp_model_206ax/bootblock.c | 31 ++ src/cpu/intel/fsp_model_206ax/cache_as_ram.inc | 292 +++++++++++++++ src/cpu/intel/fsp_model_206ax/chip.h | 37 ++ src/cpu/intel/fsp_model_206ax/finalize.c | 72 ++++ src/cpu/intel/fsp_model_206ax/microcode_blob.c | 24 ++ src/cpu/intel/fsp_model_206ax/microcode_blob.h | 33 ++ src/cpu/intel/fsp_model_206ax/model_206ax.h | 113 ++++++ src/cpu/intel/fsp_model_206ax/model_206ax_init.c | 433 +++++++++++++++++++++++ 16 files changed, 1653 insertions(+), 3 deletions(-) diff --git a/src/cpu/Kconfig b/src/cpu/Kconfig index e48fe87..46b6f1c 100644 --- a/src/cpu/Kconfig +++ b/src/cpu/Kconfig @@ -77,10 +77,32 @@ config CPU_MICROCODE_IN_CBFS bool default n +# The following options (BOARD_MICROCODE_CBFS_*) make it possible for the +# microcode configuration to be selected in the board-level Kconfig. If +# you want your platform's microcode to be generated during the build, +# add "select BOARD_MICROCODE_CBFS_GENERATE" to your mainboard's Kconfig. +# If you want to use an external microcode file, add "select +# BOARD_MICROCODE_CBFS_EXTERNAL" instead. If neither of these statements +# exists in your mainboard's configuration file (or if you include a +# "select BOARD_MICROCODE_CBFS_NONE" statement), then the ROM image will +# be built without any microcode. +config BOARD_MICROCODE_CBFS_NONE + bool + default y + +config BOARD_MICROCODE_CBFS_GENERATE + bool + default n + +config BOARD_MICROCODE_CBFS_EXTERNAL + bool + default n + choice prompt "Include CPU microcode in CBFS" if ARCH_X86 - default CPU_MICROCODE_CBFS_GENERATE if CPU_MICROCODE_IN_CBFS - default CPU_MICROCODE_CBFS_NONE if !CPU_MICROCODE_IN_CBFS + default CPU_MICROCODE_CBFS_GENERATE if CPU_MICROCODE_IN_CBFS && BOARD_MICROCODE_CBFS_GENERATE + default CPU_MICROCODE_CBFS_EXTERNAL if CPU_MICROCODE_IN_CBFS && BOARD_MICROCODE_CBFS_EXTERNAL + default CPU_MICROCODE_CBFS_NONE config CPU_MICROCODE_CBFS_GENERATE bool "Generate from tree" @@ -158,3 +180,16 @@ config CPU_MICROCODE_FILE default "cpu_microcode.bin" help The path and filename of the file containing the CPU microcode. + +config CPU_MICROCODE_CBFS_LOC + hex "Microcode address in CBFS" + depends on CPU_MICROCODE_IN_CBFS + default 0 + +config CPU_MICROCODE_CBFS_LEN + hex "Microcode length in CBFS" + depends on CPU_MICROCODE_IN_CBFS + default 0xC000 + help + The microcode needs a specific length to get correctly + detected and loaded by all CPUs. diff --git a/src/cpu/Makefile.inc b/src/cpu/Makefile.inc index a860f67..34ae53e 100644 --- a/src/cpu/Makefile.inc +++ b/src/cpu/Makefile.inc @@ -28,6 +28,12 @@ cpu_ucode_cbfs_file = $(obj)/cpu_microcode_blob.bin cbfs_include_ucode = y endif +ifneq ($(CONFIG_CPU_MICROCODE_CBFS_LOC), 0) +cpu_ucode_cbfs_offset = "-b $(CONFIG_CPU_MICROCODE_CBFS_LOC)" +else +cpu_ucode_cbfs_offset = "-b" +endif + # In case we have more than one "source" (cough) files containing microcode, we # link them together in one large blob, so that we get all the microcode updates # in one file. This makes it easier for objcopy in the final step. @@ -46,7 +52,7 @@ $(obj)/cpu_microcode_blob.bin: $(obj)/cpu_microcode_blob.o ifeq ($(cbfs_include_ucode),y) # Add CPU microcode to specified rom image $(1) add-cpu-microcode-to-cbfs = \ - $(CBFSTOOL) $(1) locate -f $(cpu_ucode_cbfs_file) -n $(cpu_ucode_cbfs_name) -a 16 | xargs $(CBFSTOOL) $(1) add -n $(cpu_ucode_cbfs_name) -f $(cpu_ucode_cbfs_file) -t 0x53 -b + $(CBFSTOOL) $(1) locate -f $(cpu_ucode_cbfs_file) -n $(cpu_ucode_cbfs_name) -a 16 | xargs $(CBFSTOOL) $(1) add -n $(cpu_ucode_cbfs_name) -f $(cpu_ucode_cbfs_file) -t 0x53 $(cpu_ucode_cbfs_offset) else add-cpu-microcode-to-cbfs = true endif diff --git a/src/cpu/intel/Kconfig b/src/cpu/intel/Kconfig index 2bafa49..6f4f561 100644 --- a/src/cpu/intel/Kconfig +++ b/src/cpu/intel/Kconfig @@ -10,6 +10,7 @@ source src/cpu/intel/model_6fx/Kconfig source src/cpu/intel/model_1067x/Kconfig source src/cpu/intel/model_106cx/Kconfig source src/cpu/intel/model_206ax/Kconfig +source src/cpu/intel/fsp_model_206ax/Kconfig source src/cpu/intel/model_2065x/Kconfig source src/cpu/intel/model_f0x/Kconfig source src/cpu/intel/model_f1x/Kconfig diff --git a/src/cpu/intel/Makefile.inc b/src/cpu/intel/Makefile.inc index 54624fb..964369d 100644 --- a/src/cpu/intel/Makefile.inc +++ b/src/cpu/intel/Makefile.inc @@ -19,6 +19,8 @@ subdirs-$(CONFIG_NORTHBRIDGE_INTEL_NEHALEM) += model_2065x subdirs-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += model_206ax subdirs-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += model_206ax subdirs-$(CONFIG_NORTHBRIDGE_INTEL_HASWELL) += haswell +subdirs-$(CONFIG_NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE) += fsp_model_206ax +subdirs-$(CONFIG_NORTHBRIDGE_INTEL_FSP_IVYBRIDGE) += fsp_model_206ax subdirs-$(CONFIG_CPU_INTEL_SLOT_2) += slot_2 subdirs-$(CONFIG_CPU_INTEL_SLOT_1) += slot_1 subdirs-$(CONFIG_CPU_INTEL_SOCKET_LGA771) += socket_LGA771 diff --git a/src/cpu/intel/fsp_model_206ax/Kconfig b/src/cpu/intel/fsp_model_206ax/Kconfig new file mode 100644 index 0000000..406f8a5 --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/Kconfig @@ -0,0 +1,93 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + + +config CPU_INTEL_FSP_MODEL_206AX + bool + +config CPU_INTEL_FSP_MODEL_306AX + bool + +if CPU_INTEL_FSP_MODEL_206AX || CPU_INTEL_FSP_MODEL_306AX + +config CPU_SPECIFIC_OPTIONS + def_bool y + select SMP + select SSE2 + select UDELAY_LAPIC + select SMM_TSEG + select CPU_MICROCODE_IN_CBFS if HAVE_FSP_BIN + select BOARD_MICROCODE_CBFS_GENERATE + select TSC_SYNC_MFENCE + +config BOOTBLOCK_CPU_INIT + string + default "cpu/intel/fsp_model_206ax/bootblock.c" + +config SERIAL_CPU_INIT + bool + default n + +config SMM_TSEG_SIZE + hex + default 0x800000 + +config ENABLE_VMX + bool "Enable VMX for virtualization" + default n + +config CPU_MICROCODE_CBFS_LOC + hex + depends on CPU_MICROCODE_IN_CBFS + default 0xfff70000 + +config CPU_MICROCODE_CBFS_LEN + hex + depends on CPU_MICROCODE_IN_CBFS + default 0xC000 if CPU_INTEL_FSP_MODEL_306AX + default 0x2800 if CPU_INTEL_FSP_MODEL_206AX + +config MICROCODE_INCLUDE_PATH + string "Location of the intel microcode patches" + default "../intel/cpu/ivybridge/microcode" if CPU_INTEL_FSP_MODEL_306AX + default "../intel/cpu/sandybridge/microcode" if CPU_INTEL_FSP_MODEL_206AX + +config FSP_IMAGE_ID_DWORD0 + hex + default 0x2D325453 if CPU_INTEL_FSP_MODEL_306AX && SOUTHBRIDGE_INTEL_FSP_I89XX + default 0x2D324343 if CPU_INTEL_FSP_MODEL_306AX && SOUTHBRIDGE_INTEL_FSP_BD82X6X + help + The FSP Image ID is different for each platform's FSP and can be used to + verify that the right FSP binary is loaded. + For the ivybridge/89xx FSP, the Image Id will be "ST2-FSP\0", + for ivybridge/bd82x6x FSPs, the Image Id will be "CC2-FSP\0", + This dword holds the first 4 bytes of the string, as + a hex value. + +config FSP_IMAGE_ID_DWORD1 + hex + default 0x00505346 + help + For the ivybridge/I89xx FSP, the Image Id will be "ST2-FSP\0", + for ivybridge/bd82x6x FSPs, the Image Id will be "CC2-FSP\0", + This dword holds the second 4 bytes of the string, as + a hex value. Since the strings use the same second dword, + no additional logic is needed. + +endif diff --git a/src/cpu/intel/fsp_model_206ax/Makefile.inc b/src/cpu/intel/fsp_model_206ax/Makefile.inc new file mode 100644 index 0000000..1ea9c2a --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/Makefile.inc @@ -0,0 +1,12 @@ +ramstage-y += model_206ax_init.c +subdirs-y += ../../x86/name + +ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += acpi.c + +smm-$(CONFIG_HAVE_SMI_HANDLER) += finalize.c + +cpu_microcode-$(CONFIG_CPU_MICROCODE_CBFS_GENERATE) += microcode_blob.c + +cpu_incs += $(src)/cpu/intel/fsp_model_206ax/cache_as_ram.inc + +CC := $(CC) -I$(CONFIG_MICROCODE_INCLUDE_PATH) diff --git a/src/cpu/intel/fsp_model_206ax/acpi.c b/src/cpu/intel/fsp_model_206ax/acpi.c new file mode 100644 index 0000000..47e651f --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/acpi.c @@ -0,0 +1,364 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 coresystems GmbH + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <types.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/cpu.h> +#include <cpu/x86/msr.h> +#include <cpu/intel/speedstep.h> +#include <cpu/intel/turbo.h> +#include <device/device.h> +#include <device/pci.h> +#include "model_206ax.h" +#include "chip.h" + +static int get_cores_per_package(void) +{ + struct cpuinfo_x86 c; + struct cpuid_result result; + int cores = 1; + + get_fms(&c, cpuid_eax(1)); + if (c.x86 != 6) + return 1; + + result = cpuid_ext(0xb, 1); + cores = result.ebx & 0xff; + + return cores; +} + +static int generate_cstate_entries(acpi_cstate_t *cstates, + int c1, int c2, int c3) +{ + int length, cstate_count = 0; + + /* Count number of active C-states */ + if (c1 > 0) + ++cstate_count; + if (c2 > 0) + ++cstate_count; + if (c3 > 0) + ++cstate_count; + if (!cstate_count) + return 0; + + length = acpigen_write_package(cstate_count + 1); + length += acpigen_write_byte(cstate_count); + + /* Add an entry if the level is enabled */ + if (c1 > 0) { + cstates[c1].ctype = 1; + length += acpigen_write_CST_package_entry(&cstates[c1]); + } + if (c2 > 0) { + cstates[c2].ctype = 2; + length += acpigen_write_CST_package_entry(&cstates[c2]); + } + if (c3 > 0) { + cstates[c3].ctype = 3; + length += acpigen_write_CST_package_entry(&cstates[c3]); + } + + acpigen_patch_len(length - 1); + return length; +} + +static int generate_C_state_entries(void) +{ + struct cpu_info *info; + struct cpu_driver *cpu; + int len, lenif; + device_t lapic; + struct cpu_intel_fsp_model_206ax_config *conf = NULL; + + /* Find the SpeedStep CPU in the device tree using magic APIC ID */ + lapic = dev_find_lapic(SPEEDSTEP_APIC_MAGIC); + if (!lapic) + return 0; + conf = lapic->chip_info; + if (!conf) + return 0; + + /* Find CPU map of supported C-states */ + info = cpu_info(); + if (!info) + return 0; + cpu = find_cpu_driver(info->cpu); + if (!cpu || !cpu->cstates) + return 0; + + len = acpigen_emit_byte(0x14); /* MethodOp */ + len += acpigen_write_len_f(); /* PkgLength */ + len += acpigen_emit_namestring("_CST"); + len += acpigen_emit_byte(0x00); /* No Arguments */ + + /* If running on AC power */ + len += acpigen_emit_byte(0xa0); /* IfOp */ + lenif = acpigen_write_len_f(); /* PkgLength */ + lenif += acpigen_emit_namestring("PWRS"); + lenif += acpigen_emit_byte(0xa4); /* ReturnOp */ + lenif += generate_cstate_entries(cpu->cstates, conf->c1_acpower, + conf->c2_acpower, conf->c3_acpower); + acpigen_patch_len(lenif - 1); + len += lenif; + + /* Else on battery power */ + len += acpigen_emit_byte(0xa4); /* ReturnOp */ + len += generate_cstate_entries(cpu->cstates, conf->c1_battery, + conf->c2_battery, conf->c3_battery); + acpigen_patch_len(len - 1); + return len; +} + +static acpi_tstate_t tss_table_fine[] = { + { 100, 1000, 0, 0x00, 0 }, + { 94, 940, 0, 0x1f, 0 }, + { 88, 880, 0, 0x1e, 0 }, + { 82, 820, 0, 0x1d, 0 }, + { 75, 760, 0, 0x1c, 0 }, + { 69, 700, 0, 0x1b, 0 }, + { 63, 640, 0, 0x1a, 0 }, + { 57, 580, 0, 0x19, 0 }, + { 50, 520, 0, 0x18, 0 }, + { 44, 460, 0, 0x17, 0 }, + { 38, 400, 0, 0x16, 0 }, + { 32, 340, 0, 0x15, 0 }, + { 25, 280, 0, 0x14, 0 }, + { 19, 220, 0, 0x13, 0 }, + { 13, 160, 0, 0x12, 0 }, +}; + +static acpi_tstate_t tss_table_coarse[] = { + { 100, 1000, 0, 0x00, 0 }, + { 88, 875, 0, 0x1f, 0 }, + { 75, 750, 0, 0x1e, 0 }, + { 63, 625, 0, 0x1d, 0 }, + { 50, 500, 0, 0x1c, 0 }, + { 38, 375, 0, 0x1b, 0 }, + { 25, 250, 0, 0x1a, 0 }, + { 13, 125, 0, 0x19, 0 }, +}; + +static int generate_T_state_entries(int core, int cores_per_package) +{ + int len; + + /* Indicate SW_ALL coordination for T-states */ + len = acpigen_write_TSD_package(core, cores_per_package, SW_ALL); + + /* Indicate FFixedHW so OS will use MSR */ + len += acpigen_write_empty_PTC(); + + /* Set a T-state limit that can be modified in NVS */ + len += acpigen_write_TPC("\\TLVL"); + + /* + * CPUID.(EAX=6):EAX[5] indicates support + * for extended throttle levels. + */ + if (cpuid_eax(6) & (1 << 5)) + len += acpigen_write_TSS_package( + ARRAY_SIZE(tss_table_fine), tss_table_fine); + else + len += acpigen_write_TSS_package( + ARRAY_SIZE(tss_table_coarse), tss_table_coarse); + + return len; +} + +static int calculate_power(int tdp, int p1_ratio, int ratio) +{ + u32 m; + u32 power; + + /* + * M = ((1.1 - ((p1_ratio - ratio) * 0.00625)) / 1.1) ^ 2 + * + * Power = (ratio / p1_ratio) * m * tdp + */ + + m = (110000 - ((p1_ratio - ratio) * 625)) / 11; + m = (m * m) / 1000; + + power = ((ratio * 100000 / p1_ratio) / 100); + power *= (m / 100) * (tdp / 1000); + power /= 1000; + + return (int)power; +} + +static int generate_P_state_entries(int core, int cores_per_package) +{ + int len, len_pss; + int ratio_min, ratio_max, ratio_turbo, ratio_step; + int coord_type, power_max, power_unit, num_entries; + int ratio, power, clock, clock_max; + msr_t msr; + + /* Determine P-state coordination type from MISC_PWR_MGMT[0] */ + msr = rdmsr(MSR_MISC_PWR_MGMT); + if (msr.lo & MISC_PWR_MGMT_EIST_HW_DIS) + coord_type = SW_ANY; + else + coord_type = HW_ALL; + + /* Get bus ratio limits and calculate clock speeds */ + msr = rdmsr(MSR_PLATFORM_INFO); + ratio_min = (msr.hi >> (40-32)) & 0xff; /* Max Efficiency Ratio */ + + /* Determine if this CPU has configurable TDP */ + if (cpu_config_tdp_levels()) { + /* Set max ratio to nominal TDP ratio */ + msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); + ratio_max = msr.lo & 0xff; + } else { + /* Max Non-Turbo Ratio */ + ratio_max = (msr.lo >> 8) & 0xff; + } + clock_max = ratio_max * SANDYBRIDGE_BCLK; + + /* Calculate CPU TDP in mW */ + msr = rdmsr(MSR_PKG_POWER_SKU_UNIT); + power_unit = 2 << ((msr.lo & 0xf) - 1); + msr = rdmsr(MSR_PKG_POWER_SKU); + power_max = ((msr.lo & 0x7fff) / power_unit) * 1000; + + /* Write _PCT indicating use of FFixedHW */ + len = acpigen_write_empty_PCT(); + + /* Write _PPC with no limit on supported P-state */ + len += acpigen_write_PPC_NVS(); + + /* Write PSD indicating configured coordination type */ + len += acpigen_write_PSD_package(core, cores_per_package, coord_type); + + /* Add P-state entries in _PSS table */ + len += acpigen_write_name("_PSS"); + + /* Determine ratio points */ + ratio_step = PSS_RATIO_STEP; + num_entries = (ratio_max - ratio_min) / ratio_step; + while (num_entries > PSS_MAX_ENTRIES-1) { + ratio_step <<= 1; + num_entries >>= 1; + } + + /* P[T] is Turbo state if enabled */ + if (get_turbo_state() == TURBO_ENABLED) { + /* _PSS package count including Turbo */ + len_pss = acpigen_write_package(num_entries + 2); + + msr = rdmsr(MSR_TURBO_RATIO_LIMIT); + ratio_turbo = msr.lo & 0xff; + + /* Add entry for Turbo ratio */ + len_pss += acpigen_write_PSS_package( + clock_max + 1, /*MHz*/ + power_max, /*mW*/ + PSS_LATENCY_TRANSITION, /*lat1*/ + PSS_LATENCY_BUSMASTER, /*lat2*/ + ratio_turbo << 8, /*control*/ + ratio_turbo << 8); /*status*/ + } else { + /* _PSS package count without Turbo */ + len_pss = acpigen_write_package(num_entries + 1); + } + + /* First regular entry is max non-turbo ratio */ + len_pss += acpigen_write_PSS_package( + clock_max, /*MHz*/ + power_max, /*mW*/ + PSS_LATENCY_TRANSITION, /*lat1*/ + PSS_LATENCY_BUSMASTER, /*lat2*/ + ratio_max << 8, /*control*/ + ratio_max << 8); /*status*/ + + /* Generate the remaining entries */ + for (ratio = ratio_min + ((num_entries - 1) * ratio_step); + ratio >= ratio_min; ratio -= ratio_step) { + + /* Calculate power at this ratio */ + power = calculate_power(power_max, ratio_max, ratio); + clock = ratio * SANDYBRIDGE_BCLK; + + len_pss += acpigen_write_PSS_package( + clock, /*MHz*/ + power, /*mW*/ + PSS_LATENCY_TRANSITION, /*lat1*/ + PSS_LATENCY_BUSMASTER, /*lat2*/ + ratio << 8, /*control*/ + ratio << 8); /*status*/ + } + + /* Fix package length */ + len_pss--; + acpigen_patch_len(len_pss); + + return len + len_pss; +} + +void generate_cpu_entries(void) +{ + int len_pr; + int coreID, cpuID, pcontrol_blk = PMB0_BASE, plen = 6; + int totalcores = dev_count_cpu(); + int cores_per_package = get_cores_per_package(); + int numcpus = totalcores/cores_per_package; + + printk(BIOS_DEBUG, "Found %d CPU(s) with %d core(s) each.\n", + numcpus, cores_per_package); + + for (cpuID=1; cpuID <=numcpus; cpuID++) { + for (coreID=1; coreID<=cores_per_package; coreID++) { + if (coreID>1) { + pcontrol_blk = 0; + plen = 0; + } + + /* Generate processor \_PR.CPUx */ + len_pr = acpigen_write_processor( + (cpuID-1)*cores_per_package+coreID-1, + pcontrol_blk, plen); + + /* Generate P-state tables */ + len_pr += generate_P_state_entries( + cpuID-1, cores_per_package); + + /* Generate C-state tables */ + len_pr += generate_C_state_entries(); + + /* Generate T-state tables */ + len_pr += generate_T_state_entries( + cpuID-1, cores_per_package); + + len_pr--; + acpigen_patch_len(len_pr); + } + } +} + +struct chip_operations cpu_intel_model_206ax_ops = { + CHIP_NAME("Intel SandyBridge/IvyBridge CPU") +}; diff --git a/src/cpu/intel/fsp_model_206ax/acpi/cpu.asl b/src/cpu/intel/fsp_model_206ax/acpi/cpu.asl new file mode 100644 index 0000000..558a9d3 --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/acpi/cpu.asl @@ -0,0 +1,102 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* These devices are created at runtime */ +External (\_PR.CPU0, DeviceObj) +External (\_PR.CPU1, DeviceObj) +External (\_PR.CPU2, DeviceObj) +External (\_PR.CPU3, DeviceObj) +External (\_PR.CPU4, DeviceObj) +External (\_PR.CPU5, DeviceObj) +External (\_PR.CPU6, DeviceObj) +External (\_PR.CPU7, DeviceObj) + +/* Notify OS to re-read CPU tables, assuming ^2 CPU count */ +Method (PNOT) +{ + If (LGreaterEqual (\PCNT, 2)) { + Notify (\_PR.CPU0, 0x81) // _CST + Notify (\_PR.CPU1, 0x81) // _CST + } + If (LGreaterEqual (\PCNT, 4)) { + Notify (\_PR.CPU2, 0x81) // _CST + Notify (\_PR.CPU3, 0x81) // _CST + } + If (LGreaterEqual (\PCNT, 8)) { + Notify (\_PR.CPU4, 0x81) // _CST + Notify (\_PR.CPU5, 0x81) // _CST + Notify (\_PR.CPU6, 0x81) // _CST + Notify (\_PR.CPU7, 0x81) // _CST + } +} + +/* Notify OS to re-read CPU _PPC limit, assuming ^2 CPU count */ +Method (PPCN) +{ + If (LGreaterEqual (\PCNT, 2)) { + Notify (\_PR.CPU0, 0x80) // _PPC + Notify (\_PR.CPU1, 0x80) // _PPC + } + If (LGreaterEqual (\PCNT, 4)) { + Notify (\_PR.CPU2, 0x80) // _PPC + Notify (\_PR.CPU3, 0x80) // _PPC + } + If (LGreaterEqual (\PCNT, 8)) { + Notify (\_PR.CPU4, 0x80) // _PPC + Notify (\_PR.CPU5, 0x80) // _PPC + Notify (\_PR.CPU6, 0x80) // _PPC + Notify (\_PR.CPU7, 0x80) // _PPC + } +} + +/* Notify OS to re-read Throttle Limit tables, assuming ^2 CPU count */ +Method (TNOT) +{ + If (LGreaterEqual (\PCNT, 2)) { + Notify (\_PR.CPU0, 0x82) // _TPC + Notify (\_PR.CPU1, 0x82) // _TPC + } + If (LGreaterEqual (\PCNT, 4)) { + Notify (\_PR.CPU2, 0x82) // _TPC + Notify (\_PR.CPU3, 0x82) // _TPC + } + If (LGreaterEqual (\PCNT, 8)) { + Notify (\_PR.CPU4, 0x82) // _TPC + Notify (\_PR.CPU5, 0x82) // _TPC + Notify (\_PR.CPU6, 0x82) // _TPC + Notify (\_PR.CPU7, 0x82) // _TPC + } +} + +/* Return a package containing enabled processor entries */ +Method (PPKG) +{ + If (LGreaterEqual (\PCNT, 8)) { + Return (Package() {\_PR.CPU0, \_PR.CPU1, \_PR.CPU2, \_PR.CPU3, + \_PR.CPU4, \_PR.CPU5, \_PR.CPU6, \_PR.CPU7}) + } ElseIf (LGreaterEqual (\PCNT, 4)) { + Return (Package() {\_PR.CPU0, \_PR.CPU1, \_PR.CPU2, \_PR.CPU3}) + } ElseIf (LGreaterEqual (\PCNT, 2)) { + Return (Package() {\_PR.CPU0, \_PR.CPU1}) + } Else { + Return (Package() {\_PR.CPU0}) + } +} diff --git a/src/cpu/intel/fsp_model_206ax/bootblock.c b/src/cpu/intel/fsp_model_206ax/bootblock.c new file mode 100644 index 0000000..e572171 --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/bootblock.c @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <arch/cpu.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/mtrr.h> +#include <arch/io.h> + +#include "model_206ax.h" + +static void bootblock_cpu_init(void) +{ +} diff --git a/src/cpu/intel/fsp_model_206ax/cache_as_ram.inc b/src/cpu/intel/fsp_model_206ax/cache_as_ram.inc new file mode 100644 index 0000000..a8d7cc5 --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/cache_as_ram.inc @@ -0,0 +1,292 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich(a)gmail.com> + * Copyright (C) 2007-2008 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <cpu/x86/stack.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/post_code.h> +#include <cbmem.h> + +#define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE +#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE + +#define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1) +#define LHLT_DELAY 0x50000 /* delay between post codes on FSP failure */ +#define NoEvictMod_MSR 0x2e0 + +cache_as_ram: + post_code(0x20) + + /* Send INIT IPI to all excluding ourself. */ + movl $0x000C4500, %eax + movl $0xFEE00300, %esi + movl %eax, (%esi) + + /* All CPUs need to be in Wait for SIPI state */ +wait_for_sipi: + movl (%esi), %eax + bt $12, %eax + jc wait_for_sipi + + post_code(0x21) + /* Zero out all fixed range and variable range MTRRs. */ + movl $mtrr_table, %esi + movl $((mtrr_table_end - mtrr_table) / 2), %edi + xorl %eax, %eax + xorl %edx, %edx +clear_mtrrs: + movw (%esi), %bx + movzx %bx, %ecx + wrmsr + add $2, %esi + dec %edi + jnz clear_mtrrs + + /* Init floating point */ + emms + fninit + + /* + * Find the FSP binary in cbfs. + * Make a fake stack that has the return value back to this code. + */ + lea fake_fsp_stack, %esp + jmp find_fsp +find_fsp_ret: + /* Save the FSP location */ + mov %eax, %ebp + cmp $CONFIG_FSP_LOC, %eax + jb halt1 + + post_code(0x22) + + /* Calculate entry into FSP */ + mov 0x30(%ebp), %eax /* Load TempRamInitEntry */ + add 0x1c(%ebp), %eax /* add in the offset for the FSP base address */ + + /* + * Pass early init variables on a fake stack (no memory yet) + * as well as the return location + */ + lea CAR_init_stack, %esp + + /* call FSP binary to setup temporary stack */ + jmp *%eax + +CAR_init_done: + addl $4, %esp + cmp $0, %eax + jne halt2 + + /* Save FSP_INFO_HEADER location in ebx */ + mov %ebp, %ebx + + /* + * setup bootloader stack + * ecx: stack base + * edx: stack top + */ + lea -4(%edx), %esp + movl %esp, %ebp + +before_romstage: + post_code(0x23) + + /* Call romstage.c main function. */ + pushl %ebx + call main + +romstage_main_return: + post_code(0x2f) + +/* Disable cache. */ + movl %cr0, %eax + orl $CR0_CacheDisable, %eax + movl %eax, %cr0 + + post_code(0x31) + + /* Disable MTRR. */ + movl $MTRRdefType_MSR, %ecx + rdmsr + andl $(~MTRRdefTypeEn), %eax + wrmsr + + post_code(0x32) + + /* Zero out all fixed range and variable range MTRRs. */ + movl $mtrr_table, %esi + movl $((mtrr_table_end - mtrr_table) / 2), %edi + xorl %eax, %eax + xorl %edx, %edx +_clear_mtrrs_: + movw (%esi), %bx + movzx %bx, %ecx + wrmsr + add $2, %esi + dec %edi + jnz _clear_mtrrs_ + + post_code(0x33) + + /* Enable cache. */ + movl %cr0, %eax + andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax + movl %eax, %cr0 + + post_code(0x36) + + /* Disable cache. */ + movl %cr0, %eax + orl $CR0_CacheDisable, %eax + movl %eax, %cr0 + + post_code(0x38) + + /* Enable Write Back and Speculative Reads for the first MB + * and coreboot_ram. + */ + movl $MTRRphysBase_MSR(0), %ecx + movl $(0x00000000 | MTRR_TYPE_WRBACK), %eax + xorl %edx, %edx + wrmsr + movl $MTRRphysMask_MSR(0), %ecx + movl $(~(CONFIG_RAMTOP - 1) | MTRRphysMaskValid), %eax + movl $CPU_PHYSMASK_HI, %edx // 36bit address space + wrmsr + +#if CONFIG_CACHE_ROM_SIZE + /* Enable Caching and speculative Reads for the + * complete ROM now that we actually have RAM. + */ + movl $MTRRphysBase_MSR(1), %ecx + movl $(CACHE_ROM_BASE | MTRR_TYPE_WRPROT), %eax + xorl %edx, %edx + wrmsr + movl $MTRRphysMask_MSR(1), %ecx + movl $(~(CONFIG_CACHE_ROM_SIZE - 1) | MTRRphysMaskValid), %eax + movl $CPU_PHYSMASK_HI, %edx + wrmsr +#endif + + post_code(0x39) + + /* And enable cache again after setting MTRRs. */ + movl %cr0, %eax + andl $~(CR0_CacheDisable | CR0_NoWriteThrough), %eax + movl %eax, %cr0 + + post_code(0x3a) + + /* Enable MTRR. */ + movl $MTRRdefType_MSR, %ecx + rdmsr + orl $MTRRdefTypeEn, %eax + wrmsr + + post_code(0x3d) + + /* Clear boot_complete flag. */ + xorl %ebp, %ebp +__main: + post_code(POST_PREPARE_RAMSTAGE) + cld /* Clear direction flag. */ + + movl %ebp, %esi + + movl $ROMSTAGE_STACK, %esp + movl %esp, %ebp + pushl %esi + call copy_and_run + +halt1: + /* + * Failures for postcode 0xBA - failed in find_fsp() + * + * Values are: + * 0x01 - FV signature, "_FVH" not present + * 0x02 - FFS GUID not present + * 0x03 - FSP INFO Header not found + * 0x04 - ImageBase does not equal CONFIG_FSP_LOC - Is the FSP rebased to + * a different location, or does it need to be? + * 0x05 - FSP INFO Header signature "FSPH" not found + * 0x06 - FSP Image ID is not the expected ID. + * For ivybridge_bd82x6x, the ID is expected to be 'CC2-FSP\0' + * For ivybridge_i89xx, the ID is expected to be 'ST2-FSP\0' + * + */ + movb $0xBA, %ah + jmp .Lhlt + +halt2: + /* + * Failures for postcode 0xBB - failed in the FSP: + * + * 0x00 - FSP_SUCCESS: Temp RAM was initialized successfully. + * 0x02 - FSP_INVALID_PARAMETER: Input parameters are invalid. + * 0x0E - FSP_NOT_FOUND: No valid microcode was found in the microcode region. + * 0x03 - FSP_UNSUPPORTED: The FSP calling conditions were not met. + * 0x07 - FSP_DEVICE_ERROR: Temp RAM initialization failed + * 0x14 - FSP_ALREADY_STARTED: Temp RAM initialization has been invoked + */ + movb $0xBB, %ah + +.Lhlt: + xchg %al, %ah +#if CONFIG_IO_POST + outb %al, $CONFIG_IO_POST_PORT +#else + post_code(POST_DEAD_CODE) +#endif + movl $LHLT_DELAY, %ecx +.Lhlt_Delay: + outb %al, $0xED + loop .Lhlt_Delay + jmp .Lhlt + + .align 4 +fake_fsp_stack: + .long find_fsp_ret + +CAR_init_params: + .long CONFIG_CPU_MICROCODE_CBFS_LOC + .long CONFIG_CPU_MICROCODE_CBFS_LEN /* Microcode Length */ + .long 0xFFFFFFFF - CONFIG_ROM_SIZE + 1 /* Firmware Location */ + .long CONFIG_ROM_SIZE /* Total Firmware Length */ + +CAR_init_stack: + .long CAR_init_done + .long CAR_init_params + +mtrr_table: + /* Fixed MTRRs */ + .word 0x250, 0x258, 0x259 + .word 0x268, 0x269, 0x26A + .word 0x26B, 0x26C, 0x26D + .word 0x26E, 0x26F + /* Variable MTRRs */ + .word 0x200, 0x201, 0x202, 0x203 + .word 0x204, 0x205, 0x206, 0x207 + .word 0x208, 0x209, 0x20A, 0x20B + .word 0x20C, 0x20D, 0x20E, 0x20F +/* .word 0x210, 0x211, 0x212, 0x213 */ +mtrr_table_end: + diff --git a/src/cpu/intel/fsp_model_206ax/chip.h b/src/cpu/intel/fsp_model_206ax/chip.h new file mode 100644 index 0000000..afa5774 --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/chip.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Magic value used to locate this chip in the device tree */ +#define SPEEDSTEP_APIC_MAGIC 0xACAC + +struct cpu_intel_fsp_model_206ax_config { + u8 disable_acpi; /* Do not generate CPU ACPI tables */ + + u8 pstate_coord_type; /* Processor Coordination Type */ + + int c1_battery; /* ACPI C1 on Battery Power */ + int c2_battery; /* ACPI C2 on Battery Power */ + int c3_battery; /* ACPI C3 on Battery Power */ + + int c1_acpower; /* ACPI C1 on AC Power */ + int c2_acpower; /* ACPI C2 on AC Power */ + int c3_acpower; /* ACPI C3 on AC Power */ + + int tcc_offset; /* TCC Activation Offset */ +}; diff --git a/src/cpu/intel/fsp_model_206ax/finalize.c b/src/cpu/intel/fsp_model_206ax/finalize.c new file mode 100644 index 0000000..4ed5d1e --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/finalize.c @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> +#include "model_206ax.h" + +static void msr_set_bit(unsigned reg, unsigned bit) +{ + msr_t msr = rdmsr(reg); + + if (bit < 32) { + if (msr.lo & (1 << bit)) + return; + msr.lo |= 1 << bit; + } else { + if (msr.hi & (1 << (bit - 32))) + return; + msr.hi |= 1 << (bit - 32); + } + + wrmsr(reg, msr); +} + +void intel_model_206ax_finalize_smm(void) +{ + msr_set_bit(MSR_PMG_CST_CONFIG_CONTROL, 15); + + /* Lock AES-NI only if supported */ + if (cpuid_ecx(1) & (1 << 25)) + msr_set_bit(MSR_FEATURE_CONFIG, 0); + +#ifdef LOCK_POWER_CONTROL_REGISTERS + /* + * Lock the power control registers. + * + * These registers can be left unlocked if modifying power + * limits from the OS is desirable. Modifying power limits + * from the OS can be especially useful for experimentation + * during early phases of system bringup while the thermal + * power envelope is being proven. + */ + + msr_set_bit(MSR_PP0_CURRENT_CONFIG, 31); + msr_set_bit(MSR_PP1_CURRENT_CONFIG, 31); + msr_set_bit(MSR_PKG_POWER_LIMIT, 63); + msr_set_bit(MSR_PP0_POWER_LIMIT, 31); + msr_set_bit(MSR_PP1_POWER_LIMIT, 31); +#endif + + msr_set_bit(MSR_MISC_PWR_MGMT, 22); + msr_set_bit(MSR_LT_LOCK_MEMORY, 0); +} diff --git a/src/cpu/intel/fsp_model_206ax/microcode_blob.c b/src/cpu/intel/fsp_model_206ax/microcode_blob.c new file mode 100644 index 0000000..8bd790a --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/microcode_blob.c @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +unsigned microcode[] = { +#if IS_ENABLED(CONFIG_CPU_MICROCODE_IN_CBFS) +#include "microcode_blob.h" +#endif +}; diff --git a/src/cpu/intel/fsp_model_206ax/microcode_blob.h b/src/cpu/intel/fsp_model_206ax/microcode_blob.h new file mode 100644 index 0000000..e56bef1 --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/microcode_blob.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#if IS_ENABLED(CONFIG_CPU_INTEL_FSP_MODEL_206AX) + /* Size is 0x2800 - Update in Kconfigs when any included file changes*/ + #include <microcode-m12206a7_00000029.h> +#endif + +#if IS_ENABLED(CONFIG_CPU_INTEL_FSP_MODEL_306AX) + /* Size is 0xC000 - Update in Kconfigs when any included file changes*/ + #include <microcode-m12306a2_00000008.h> + #include <microcode-m12306a4_00000007.h> + #include <microcode-m12306a5_00000007.h> + #include <microcode-m12306a8_00000010.h> + #include <microcode-m12306a9_00000019.h> +#endif diff --git a/src/cpu/intel/fsp_model_206ax/model_206ax.h b/src/cpu/intel/fsp_model_206ax/model_206ax.h new file mode 100644 index 0000000..a7ca04a --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/model_206ax.h @@ -0,0 +1,113 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CPU_INTEL_MODEL_206AX_H +#define _CPU_INTEL_MODEL_206AX_H + +/* SandyBridge/IvyBridge bus clock is fixed at 100MHz */ +#define SANDYBRIDGE_BCLK 100 + +#define IA32_FEATURE_CONTROL 0x3a +#define CPUID_VMX (1 << 5) +#define CPUID_SMX (1 << 6) +#define MSR_FEATURE_CONFIG 0x13c +#define MSR_FLEX_RATIO 0x194 +#define FLEX_RATIO_LOCK (1 << 20) +#define FLEX_RATIO_EN (1 << 16) +#define IA32_PLATFORM_DCA_CAP 0x1f8 +#define IA32_MISC_ENABLE 0x1a0 +#define MSR_TEMPERATURE_TARGET 0x1a2 +#define IA32_PERF_CTL 0x199 +#define IA32_THERM_INTERRUPT 0x19b +#define IA32_ENERGY_PERFORMANCE_BIAS 0x1b0 +#define ENERGY_POLICY_PERFORMANCE 0 +#define ENERGY_POLICY_NORMAL 6 +#define ENERGY_POLICY_POWERSAVE 15 +#define IA32_PACKAGE_THERM_INTERRUPT 0x1b2 +#define MSR_LT_LOCK_MEMORY 0x2e7 +#define IA32_MC0_STATUS 0x401 + +#define MSR_PIC_MSG_CONTROL 0x2e +#define MSR_PLATFORM_INFO 0xce +#define PLATFORM_INFO_SET_TDP (1 << 29) +#define MSR_PMG_CST_CONFIG_CONTROL 0xe2 +#define MSR_PMG_IO_CAPTURE_BASE 0xe4 + +#define MSR_MISC_PWR_MGMT 0x1aa +#define MISC_PWR_MGMT_EIST_HW_DIS (1 << 0) +#define MSR_TURBO_RATIO_LIMIT 0x1ad +#define MSR_POWER_CTL 0x1fc + +#define MSR_PKGC3_IRTL 0x60a +#define MSR_PKGC6_IRTL 0x60b +#define MSR_PKGC7_IRTL 0x60c +#define IRTL_VALID (1 << 15) +#define IRTL_1_NS (0 << 10) +#define IRTL_32_NS (1 << 10) +#define IRTL_1024_NS (2 << 10) +#define IRTL_32768_NS (3 << 10) +#define IRTL_1048576_NS (4 << 10) +#define IRTL_33554432_NS (5 << 10) +#define IRTL_RESPONSE_MASK (0x3ff) + +/* long duration in low dword, short duration in high dword */ +#define MSR_PKG_POWER_LIMIT 0x610 +#define PKG_POWER_LIMIT_MASK 0x7fff +#define PKG_POWER_LIMIT_EN (1 << 15) +#define PKG_POWER_LIMIT_CLAMP (1 << 16) +#define PKG_POWER_LIMIT_TIME_SHIFT 17 +#define PKG_POWER_LIMIT_TIME_MASK 0x7f + +#define MSR_PP0_CURRENT_CONFIG 0x601 +#define PP0_CURRENT_LIMIT (112 << 3) /* 112 A */ +#define MSR_PP1_CURRENT_CONFIG 0x602 +#define PP1_CURRENT_LIMIT_SNB (35 << 3) /* 35 A */ +#define PP1_CURRENT_LIMIT_IVB (50 << 3) /* 50 A */ +#define MSR_PKG_POWER_SKU_UNIT 0x606 +#define MSR_PKG_POWER_SKU 0x614 +#define MSR_PP0_POWER_LIMIT 0x638 +#define MSR_PP1_POWER_LIMIT 0x640 + +#define IVB_CONFIG_TDP_MIN_CPUID 0x306a2 +#define MSR_CONFIG_TDP_NOMINAL 0x648 +#define MSR_CONFIG_TDP_LEVEL1 0x649 +#define MSR_CONFIG_TDP_LEVEL2 0x64a +#define MSR_CONFIG_TDP_CONTROL 0x64b +#define MSR_TURBO_ACTIVATION_RATIO 0x64c + +/* P-state configuration */ +#define PSS_MAX_ENTRIES 8 +#define PSS_RATIO_STEP 2 +#define PSS_LATENCY_TRANSITION 10 +#define PSS_LATENCY_BUSMASTER 10 + +#ifndef __ROMCC__ +#ifdef __SMM__ +/* Lock MSRs */ +void intel_model_206ax_finalize_smm(void); +#else +/* Configure power limits for turbo mode */ +void set_power_limits(u8 power_limit_1_time); +int cpu_config_tdp_levels(void); +#endif +#endif + +#endif diff --git a/src/cpu/intel/fsp_model_206ax/model_206ax_init.c b/src/cpu/intel/fsp_model_206ax/model_206ax_init.c new file mode 100644 index 0000000..6eb4787 --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/model_206ax_init.c @@ -0,0 +1,433 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <string.h> +#include <arch/acpi.h> +#include <cpu/cpu.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/lapic.h> +#include <cpu/intel/speedstep.h> +#include <cpu/intel/turbo.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/name.h> +#include <pc80/mc146818rtc.h> +#include <usbdebug.h> +#include "model_206ax.h" +#include "chip.h" + +static void enable_vmx(void) +{ + struct cpuid_result regs; + msr_t msr; + int enable = CONFIG_ENABLE_VMX; + + regs = cpuid(1); + /* Check that the VMX is supported before reading or writing the MSR. */ + if (!((regs.ecx & CPUID_VMX) || (regs.ecx & CPUID_SMX))) + return; + + msr = rdmsr(IA32_FEATURE_CONTROL); + + if (msr.lo & (1 << 0)) { + printk(BIOS_ERR, "VMX is locked, so %s will do nothing\n", __func__); + /* VMX locked. If we set it again we get an illegal + * instruction + */ + return; + } + + /* The IA32_FEATURE_CONTROL MSR may initialize with random values. + * It must be cleared regardless of VMX config setting. + */ + msr.hi = msr.lo = 0; + + printk(BIOS_DEBUG, "%s VMX\n", enable ? "Enabling" : "Disabling"); + + if (enable) { + msr.lo |= (1 << 2); + if (regs.ecx & CPUID_SMX) + msr.lo |= (1 << 1); + } + + wrmsr(IA32_FEATURE_CONTROL, msr); +} + +/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */ +static const u8 power_limit_time_sec_to_msr[] = { + [0] = 0x00, + [1] = 0x0a, + [2] = 0x0b, + [3] = 0x4b, + [4] = 0x0c, + [5] = 0x2c, + [6] = 0x4c, + [7] = 0x6c, + [8] = 0x0d, + [10] = 0x2d, + [12] = 0x4d, + [14] = 0x6d, + [16] = 0x0e, + [20] = 0x2e, + [24] = 0x4e, + [28] = 0x6e, + [32] = 0x0f, + [40] = 0x2f, + [48] = 0x4f, + [56] = 0x6f, + [64] = 0x10, + [80] = 0x30, + [96] = 0x50, + [112] = 0x70, + [128] = 0x11, +}; + +/* Convert POWER_LIMIT_1_TIME MSR value to seconds */ +static const u8 power_limit_time_msr_to_sec[] = { + [0x00] = 0, + [0x0a] = 1, + [0x0b] = 2, + [0x4b] = 3, + [0x0c] = 4, + [0x2c] = 5, + [0x4c] = 6, + [0x6c] = 7, + [0x0d] = 8, + [0x2d] = 10, + [0x4d] = 12, + [0x6d] = 14, + [0x0e] = 16, + [0x2e] = 20, + [0x4e] = 24, + [0x6e] = 28, + [0x0f] = 32, + [0x2f] = 40, + [0x4f] = 48, + [0x6f] = 56, + [0x10] = 64, + [0x30] = 80, + [0x50] = 96, + [0x70] = 112, + [0x11] = 128, +}; + +int cpu_config_tdp_levels(void) +{ + msr_t platform_info; + + /* Minimum CPU revision */ + if (cpuid_eax(1) < IVB_CONFIG_TDP_MIN_CPUID) + return 0; + + /* Bits 34:33 indicate how many levels supported */ + platform_info = rdmsr(MSR_PLATFORM_INFO); + return (platform_info.hi >> 1) & 3; +} + +/* + * Configure processor power limits if possible + * This must be done AFTER set of BIOS_RESET_CPL + */ +void set_power_limits(u8 power_limit_1_time) +{ + msr_t msr = rdmsr(MSR_PLATFORM_INFO); + msr_t limit; + unsigned power_unit; + unsigned tdp, min_power, max_power, max_time; + u8 power_limit_1_val; + + if (power_limit_1_time > ARRAY_SIZE(power_limit_time_sec_to_msr)) + return; + + if (!(msr.lo & PLATFORM_INFO_SET_TDP)) + return; + + /* Get units */ + msr = rdmsr(MSR_PKG_POWER_SKU_UNIT); + power_unit = 2 << ((msr.lo & 0xf) - 1); + + /* Get power defaults for this SKU */ + msr = rdmsr(MSR_PKG_POWER_SKU); + tdp = msr.lo & 0x7fff; + min_power = (msr.lo >> 16) & 0x7fff; + max_power = msr.hi & 0x7fff; + max_time = (msr.hi >> 16) & 0x7f; + + printk(BIOS_DEBUG, "CPU TDP: %u Watts\n", tdp / power_unit); + + if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time) + power_limit_1_time = power_limit_time_msr_to_sec[max_time]; + + if (min_power > 0 && tdp < min_power) + tdp = min_power; + + if (max_power > 0 && tdp > max_power) + tdp = max_power; + + power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time]; + + /* Set long term power limit to TDP */ + limit.lo = 0; + limit.lo |= tdp & PKG_POWER_LIMIT_MASK; + limit.lo |= PKG_POWER_LIMIT_EN; + limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) << + PKG_POWER_LIMIT_TIME_SHIFT; + + /* Set short term power limit to 1.25 * TDP */ + limit.hi = 0; + limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK; + limit.hi |= PKG_POWER_LIMIT_EN; + /* Power limit 2 time is only programmable on SNB EP/EX */ + + wrmsr(MSR_PKG_POWER_LIMIT, limit); + + /* Use nominal TDP values for CPUs with configurable TDP */ + if (cpu_config_tdp_levels()) { + msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); + limit.hi = 0; + limit.lo = msr.lo & 0xff; + wrmsr(MSR_TURBO_ACTIVATION_RATIO, limit); + } +} + +static void configure_misc(void) +{ + msr_t msr; + + msr = rdmsr(IA32_MISC_ENABLE); + msr.lo |= (1 << 0); /* Fast String enable */ + msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */ + msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */ + wrmsr(IA32_MISC_ENABLE, msr); + + /* Disable Thermal interrupts */ + msr.lo = 0; + msr.hi = 0; + wrmsr(IA32_THERM_INTERRUPT, msr); + + /* Enable package critical interrupt only */ + msr.lo = 1 << 4; + msr.hi = 0; + wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr); +} + +static void enable_lapic_tpr(void) +{ + msr_t msr; + + msr = rdmsr(MSR_PIC_MSG_CONTROL); + msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */ + wrmsr(MSR_PIC_MSG_CONTROL, msr); +} + +static void configure_dca_cap(void) +{ + struct cpuid_result cpuid_regs; + msr_t msr; + + /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */ + cpuid_regs = cpuid(1); + if (cpuid_regs.ecx & (1 << 18)) { + msr = rdmsr(IA32_PLATFORM_DCA_CAP); + msr.lo |= 1; + wrmsr(IA32_PLATFORM_DCA_CAP, msr); + } +} + +static void set_max_ratio(void) +{ + msr_t msr, perf_ctl; + + perf_ctl.hi = 0; + + /* Check for configurable TDP option */ + if (cpu_config_tdp_levels()) { + /* Set to nominal TDP ratio */ + msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); + perf_ctl.lo = (msr.lo & 0xff) << 8; + } else { + /* Platform Info bits 15:8 give max ratio */ + msr = rdmsr(MSR_PLATFORM_INFO); + perf_ctl.lo = msr.lo & 0xff00; + } + wrmsr(IA32_PERF_CTL, perf_ctl); + + printk(BIOS_DEBUG, "model_x06ax: frequency set to %d\n", + ((perf_ctl.lo >> 8) & 0xff) * SANDYBRIDGE_BCLK); +} + +static void configure_mca(void) +{ + msr_t msr; + int i; + + msr.lo = msr.hi = 0; + /* This should only be done on a cold boot */ + for (i = 0; i < 7; i++) + wrmsr(IA32_MC0_STATUS + (i * 4), msr); +} + +#if CONFIG_USBDEBUG +static unsigned ehci_debug_addr; +#endif + +/* + * Initialize any extra cores/threads in this package. + */ +static void intel_cores_init(device_t cpu) +{ + struct cpuid_result result; + unsigned threads_per_package, threads_per_core, i; + + /* Logical processors (threads) per core */ + result = cpuid_ext(0xb, 0); + threads_per_core = result.ebx & 0xffff; + + /* Logical processors (threads) per package */ + result = cpuid_ext(0xb, 1); + threads_per_package = result.ebx & 0xffff; + + /* Only initialize extra cores from BSP */ + if (cpu->path.apic.apic_id) + return; + + printk(BIOS_DEBUG, "CPU: %u has %u cores, %u threads per core\n", + cpu->path.apic.apic_id, threads_per_package/threads_per_core, + threads_per_core); + + for (i = 1; i < threads_per_package; ++i) { + struct device_path cpu_path; + device_t new; + + /* Build the cpu device path */ + cpu_path.type = DEVICE_PATH_APIC; + cpu_path.apic.apic_id = + cpu->path.apic.apic_id + i; + + /* Update APIC ID if no hyperthreading */ + if (threads_per_core == 1) + cpu_path.apic.apic_id <<= 1; + + /* Allocate the new cpu device structure */ + new = alloc_dev(cpu->bus, &cpu_path); + if (!new) + continue; + + printk(BIOS_DEBUG, "CPU: %u has core %u\n", + cpu->path.apic.apic_id, + new->path.apic.apic_id); + +#if CONFIG_SMP && CONFIG_MAX_CPUS > 1 + /* Start the new cpu */ + if (!start_cpu(new)) { + /* Record the error in cpu? */ + printk(BIOS_ERR, "CPU %u would not start!\n", + new->path.apic.apic_id); + } +#endif + } +} + +static void model_206ax_init(device_t cpu) +{ + char processor_name[49]; + struct cpuid_result cpuid_regs; + + /* Turn on caching if we haven't already */ + x86_enable_cache(); + + /* Clear out pending MCEs */ + configure_mca(); + + /* Print processor name */ + fill_processor_name(processor_name); + printk(BIOS_INFO, "CPU: %s.\n", processor_name); + +#if CONFIG_USBDEBUG + // Is this caution really needed? + if(!ehci_debug_addr) + ehci_debug_addr = get_ehci_debug(); + set_ehci_debug(0); +#endif + + /* Setup MTRRs based on physical address size */ + cpuid_regs = cpuid(0x80000008); + x86_setup_fixed_mtrrs(); + x86_setup_var_mtrrs(cpuid_regs.eax & 0xff, 2); + x86_mtrr_check(); + + /* Setup Page Attribute Tables (PAT) */ + // TODO set up PAT + +#if CONFIG_USBDEBUG + set_ehci_debug(ehci_debug_addr); +#endif + + /* Enable the local cpu apics */ + enable_lapic_tpr(); + setup_lapic(); + + /* Enable virtualization if enabled in CMOS */ + enable_vmx(); + + /* Configure Enhanced SpeedStep and Thermal Sensors */ + configure_misc(); + + /* Enable Direct Cache Access */ + configure_dca_cap(); + + /* Set Max Ratio */ + set_max_ratio(); + + /* Enable Turbo */ + enable_turbo(); + + /* Start up extra cores */ + intel_cores_init(cpu); +} + +static struct device_operations cpu_dev_ops = { + .init = model_206ax_init, +}; + +static struct cpu_device_id cpu_table[] = { + { X86_VENDOR_INTEL, 0x206a0 }, /* Intel Sandybridge */ + { X86_VENDOR_INTEL, 0x206a6 }, /* Intel Sandybridge D1 */ + { X86_VENDOR_INTEL, 0x206a7 }, /* Intel Sandybridge D2/J1 */ + { X86_VENDOR_INTEL, 0x306a0 }, /* Intel IvyBridge */ + { X86_VENDOR_INTEL, 0x306a2 }, /* Intel IvyBridge */ + { X86_VENDOR_INTEL, 0x306a4 }, /* Intel IvyBridge */ + { X86_VENDOR_INTEL, 0x306a5 }, /* Intel IvyBridge */ + { X86_VENDOR_INTEL, 0x306a6 }, /* Intel IvyBridge */ + { X86_VENDOR_INTEL, 0x306a8 }, /* Intel IvyBridge */ + { X86_VENDOR_INTEL, 0x306a9 }, /* Intel IvyBridge */ + { 0, 0 }, +}; + +static const struct cpu_driver driver __cpu_driver = { + .ops = &cpu_dev_ops, + .id_table = cpu_table, +}; +

1 0

New patch to review for coreboot: 228b5bf AMD Olivehill: Add ACPI Sx call for southbridge into _PTS
by Zheng Bao 20 Nov '13

20 Nov '13

Zheng Bao (zheng.bao(a)amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4260 -gerrit commit 228b5bf4e635948a8da578ef134035054b329c47 Author: Zheng Bao <fishbaozi(a)gmail.com> Date: Wed Nov 20 15:11:22 2013 +0800 AMD Olivehill: Add ACPI Sx call for southbridge into _PTS The Sx for southbridge calls are in AlibSsdtKB. The original ASL code has been scrubbed. Without the calls, Olive Hill can not wake up if it boots Windows. TODO: 1. Populate to other board. 2. If the board is wake up by USB keyboard, Sleeping again will wake up immediately without pressing any button. Change-Id: Ia7bba29904dbd6f33fdb08bf88bb499005ef561b Signed-off-by: Zheng Bao <zheng.bao(a)amd.com> Signed-off-by: Zheng Bao <fishbaozi(a)gmail.com> --- src/mainboard/amd/olivehill/acpi/sleep.asl | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/src/mainboard/amd/olivehill/acpi/sleep.asl b/src/mainboard/amd/olivehill/acpi/sleep.asl index dd0d9a4..fc04ecc 100644 --- a/src/mainboard/amd/olivehill/acpi/sleep.asl +++ b/src/mainboard/amd/olivehill/acpi/sleep.asl @@ -36,6 +36,10 @@ Name(WKST,Package(){Zero, Zero}) * the ACPI driver. This method cannot modify the configuration or power * state of any device in the system. */ + +External(\_SB.APTS, MethodObj) +External(\_SB.AWAK, MethodObj) + Method(_PTS, 1) { /* DBGO("\\_PTS\n") */ /* DBGO("From S0 to S") */ @@ -46,6 +50,7 @@ Method(_PTS, 1) { Store(0, Index(WKST,0)) Store(0, Index(WKST,1)) Store(7, UPWS) + \_SB.APTS(Arg0) } /* End Method(\_PTS) */ /* @@ -84,6 +89,7 @@ Method(\_WAK, 1) { /* DBGO("From S") */ /* DBGO(Arg0) */ /* DBGO(" to S0\n") */ + \_SB.AWAK(Arg0) Return(WKST) } /* End Method(\_WAK) */

1 0

New patch to review for coreboot: 689ec1b Trival: Fix the double spaces in copyright header.
by Zheng Bao 20 Nov '13

20 Nov '13

Zheng Bao (zheng.bao(a)amd.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4259 -gerrit commit 689ec1ba34e685272ac0d670afb719b603ff6185 Author: Zheng Bao <fishbaozi(a)gmail.com> Date: Wed Nov 20 15:09:23 2013 +0800 Trival: Fix the double spaces in copyright header. Change-Id: I1bdc52efc827c331c53b97d2b96edafc518d05bf Signed-off-by: Zheng Bao <zheng.bao(a)amd.com> Signed-off-by: Zheng Bao <fishbaozi(a)gmail.com> --- src/mainboard/amd/olivehill/Kconfig | 2 +- src/mainboard/amd/olivehill/Makefile.inc | 2 +- src/mainboard/amd/olivehill/OptionsIds.h | 2 +- src/mainboard/amd/olivehill/PlatformGnbPcieComplex.h | 2 +- src/mainboard/amd/olivehill/acpi/routing.asl | 2 +- src/mainboard/amd/olivehill/acpi_tables.c | 2 +- src/mainboard/amd/olivehill/agesawrapper.c | 2 +- src/mainboard/amd/olivehill/agesawrapper.h | 2 +- src/mainboard/amd/olivehill/cmos.layout | 2 +- src/mainboard/amd/olivehill/dsdt.asl | 2 +- src/mainboard/amd/olivehill/get_bus_conf.c | 2 +- src/mainboard/amd/olivehill/irq_tables.c | 2 +- src/mainboard/amd/olivehill/mptable.c | 2 +- src/mainboard/amd/olivehill/romstage.c | 2 +- 14 files changed, 14 insertions(+), 14 deletions(-) diff --git a/src/mainboard/amd/olivehill/Kconfig b/src/mainboard/amd/olivehill/Kconfig index 7d61063..fdd0d6c 100644 --- a/src/mainboard/amd/olivehill/Kconfig +++ b/src/mainboard/amd/olivehill/Kconfig @@ -14,7 +14,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # if BOARD_AMD_OLIVEHILL diff --git a/src/mainboard/amd/olivehill/Makefile.inc b/src/mainboard/amd/olivehill/Makefile.inc index a83297a..3103f70 100644 --- a/src/mainboard/amd/olivehill/Makefile.inc +++ b/src/mainboard/amd/olivehill/Makefile.inc @@ -14,7 +14,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # romstage-y += buildOpts.c diff --git a/src/mainboard/amd/olivehill/OptionsIds.h b/src/mainboard/amd/olivehill/OptionsIds.h index 0a1d328..e006441 100644 --- a/src/mainboard/amd/olivehill/OptionsIds.h +++ b/src/mainboard/amd/olivehill/OptionsIds.h @@ -14,7 +14,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /** diff --git a/src/mainboard/amd/olivehill/PlatformGnbPcieComplex.h b/src/mainboard/amd/olivehill/PlatformGnbPcieComplex.h index 1db8b2d..b3c69cf 100644 --- a/src/mainboard/amd/olivehill/PlatformGnbPcieComplex.h +++ b/src/mainboard/amd/olivehill/PlatformGnbPcieComplex.h @@ -14,7 +14,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef _PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/olivehill/acpi/routing.asl b/src/mainboard/amd/olivehill/acpi/routing.asl index 0b924a3..7733a4a 100644 --- a/src/mainboard/amd/olivehill/acpi/routing.asl +++ b/src/mainboard/amd/olivehill/acpi/routing.asl @@ -15,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /* diff --git a/src/mainboard/amd/olivehill/acpi_tables.c b/src/mainboard/amd/olivehill/acpi_tables.c index b5ae758..dd59225 100644 --- a/src/mainboard/amd/olivehill/acpi_tables.c +++ b/src/mainboard/amd/olivehill/acpi_tables.c @@ -14,7 +14,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <console/console.h> diff --git a/src/mainboard/amd/olivehill/agesawrapper.c b/src/mainboard/amd/olivehill/agesawrapper.c index f0ad493..24a5893 100644 --- a/src/mainboard/amd/olivehill/agesawrapper.c +++ b/src/mainboard/amd/olivehill/agesawrapper.c @@ -14,7 +14,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /*---------------------------------------------------------------------------------------- diff --git a/src/mainboard/amd/olivehill/agesawrapper.h b/src/mainboard/amd/olivehill/agesawrapper.h index db893cd..5007510 100644 --- a/src/mainboard/amd/olivehill/agesawrapper.h +++ b/src/mainboard/amd/olivehill/agesawrapper.h @@ -14,7 +14,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /*---------------------------------------------------------------------------------------- diff --git a/src/mainboard/amd/olivehill/cmos.layout b/src/mainboard/amd/olivehill/cmos.layout index f6b5806..5520564 100644 --- a/src/mainboard/amd/olivehill/cmos.layout +++ b/src/mainboard/amd/olivehill/cmos.layout @@ -15,7 +15,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #***************************************************************************** entries diff --git a/src/mainboard/amd/olivehill/dsdt.asl b/src/mainboard/amd/olivehill/dsdt.asl index 78d9bca..e0c21cf 100644 --- a/src/mainboard/amd/olivehill/dsdt.asl +++ b/src/mainboard/amd/olivehill/dsdt.asl @@ -15,7 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /* DefinitionBlock Statement */ diff --git a/src/mainboard/amd/olivehill/get_bus_conf.c b/src/mainboard/amd/olivehill/get_bus_conf.c index a380872..81caf7d 100644 --- a/src/mainboard/amd/olivehill/get_bus_conf.c +++ b/src/mainboard/amd/olivehill/get_bus_conf.c @@ -14,7 +14,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <console/console.h> diff --git a/src/mainboard/amd/olivehill/irq_tables.c b/src/mainboard/amd/olivehill/irq_tables.c index 9eb3649..2eff4e0 100644 --- a/src/mainboard/amd/olivehill/irq_tables.c +++ b/src/mainboard/amd/olivehill/irq_tables.c @@ -14,7 +14,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <console/console.h> diff --git a/src/mainboard/amd/olivehill/mptable.c b/src/mainboard/amd/olivehill/mptable.c index 83c0b41..a20bbc6 100644 --- a/src/mainboard/amd/olivehill/mptable.c +++ b/src/mainboard/amd/olivehill/mptable.c @@ -14,7 +14,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <console/console.h> diff --git a/src/mainboard/amd/olivehill/romstage.c b/src/mainboard/amd/olivehill/romstage.c index 38fd622..9431d4a 100644 --- a/src/mainboard/amd/olivehill/romstage.c +++ b/src/mainboard/amd/olivehill/romstage.c @@ -14,7 +14,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <stdint.h>

1 0

Patch set updated for coreboot: c0571bd Lenovo X201 support (mobo part)
by Vladimir Serbinenko 20 Nov '13

20 Nov '13

Vladimir Serbinenko (phcoder(a)gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3462 -gerrit commit c0571bdec3fe8b032ee8374cbdd43f584c7d4cf3 Author: Vladimir Serbinenko <phcoder(a)gmail.com> Date: Thu Nov 14 19:11:19 2013 +0100 Lenovo X201 support (mobo part) Lenovo X201 is a recent laptop by lenovo based on nehalem chipset and representing good value for both geeks and less-geeks alike. This commit allows to run it without factory BIOS. Change-Id: I4f82e7c33b899a165693d6fec4eeb932b2c627bd Signed-off-by: Vladimir Serbinenko <phcoder(a)gmail.com> --- src/mainboard/lenovo/Kconfig | 6 + src/mainboard/lenovo/x201/Kconfig | 59 ++++ src/mainboard/lenovo/x201/Makefile.inc | 24 ++ src/mainboard/lenovo/x201/acpi/dock.asl | 82 +++++ src/mainboard/lenovo/x201/acpi/ec.asl | 26 ++ src/mainboard/lenovo/x201/acpi/gpe.asl | 30 ++ src/mainboard/lenovo/x201/acpi/mainboard.asl | 0 src/mainboard/lenovo/x201/acpi/platform.asl | 184 ++++++++++ src/mainboard/lenovo/x201/acpi/superio.asl | 51 +++ src/mainboard/lenovo/x201/acpi/video.asl | 111 ++++++ src/mainboard/lenovo/x201/acpi_tables.c | 283 +++++++++++++++ src/mainboard/lenovo/x201/cmos.default | 11 + src/mainboard/lenovo/x201/cmos.layout | 137 ++++++++ src/mainboard/lenovo/x201/devicetree.cb | 148 ++++++++ src/mainboard/lenovo/x201/dock.c | 62 ++++ src/mainboard/lenovo/x201/dock.h | 28 ++ src/mainboard/lenovo/x201/dsdt.asl | 94 +++++ src/mainboard/lenovo/x201/fadt.c | 160 +++++++++ src/mainboard/lenovo/x201/gma.c | 508 +++++++++++++++++++++++++++ src/mainboard/lenovo/x201/gpio.h | 416 ++++++++++++++++++++++ src/mainboard/lenovo/x201/irq_tables.c | 61 ++++ src/mainboard/lenovo/x201/mainboard.c | 282 +++++++++++++++ src/mainboard/lenovo/x201/mptable.c | 82 +++++ src/mainboard/lenovo/x201/romstage.c | 413 ++++++++++++++++++++++ src/mainboard/lenovo/x201/smi.h | 27 ++ src/mainboard/lenovo/x201/smihandler.c | 210 +++++++++++ 26 files changed, 3495 insertions(+) diff --git a/src/mainboard/lenovo/Kconfig b/src/mainboard/lenovo/Kconfig index 8ee2778..bae1e53 100644 --- a/src/mainboard/lenovo/Kconfig +++ b/src/mainboard/lenovo/Kconfig @@ -12,6 +12,11 @@ config BOARD_LENOVO_X60 ThinkPad X60s (Model 1702, 1703) ThinkPad X60 (Model 1709) +config BOARD_LENOVO_X201 + bool "ThinkPad X201" + help + Lenovo X201 laptop. + config BOARD_LENOVO_T60 bool "ThinkPad T60 / T60p" help @@ -23,6 +28,7 @@ config BOARD_LENOVO_T60 endchoice source "src/mainboard/lenovo/x60/Kconfig" +source "src/mainboard/lenovo/x201/Kconfig" source "src/mainboard/lenovo/t60/Kconfig" config MAINBOARD_VENDOR diff --git a/src/mainboard/lenovo/x201/Kconfig b/src/mainboard/lenovo/x201/Kconfig new file mode 100644 index 0000000..c0b8117 --- /dev/null +++ b/src/mainboard/lenovo/x201/Kconfig @@ -0,0 +1,59 @@ +if BOARD_LENOVO_X201 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ARCH_X86 + select NORTHBRIDGE_INTEL_NEHALEM + select SOUTHBRIDGE_INTEL_IBEXPEAK + select SOUTHBRIDGE_RICOH_RL5C476 + select SUPERIO_NSC_PC87382 + select SUPERIO_NSC_PC87392 + select EC_LENOVO_PMH7 + select EC_LENOVO_H8 + select DRIVERS_ICS_954309 + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select MMCONF_SUPPORT + select GFXUMA + select BOARD_ROMSIZE_KB_8192 + select CHANNEL_XOR_RANDOMIZATION + select HAVE_ACPI_TABLES + select HAVE_ACPI_RESUME + select EARLY_CBMEM_INIT + select HAVE_USBDEBUG_OPTIONS + +config MAINBOARD_DIR + string + default lenovo/x201 + +config MAINBOARD_PART_NUMBER + string + default "3626EN1" + +config MAINBOARD_VERSION + string + default "ThinkPad X201" + +config MAINBOARD_VENDOR + string + default "LENOVO" + +config MMCONF_BASE_ADDRESS + hex + default 0xe0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 4 + +config CPU_ADDR_BITS + int + default 36 + +endif diff --git a/src/mainboard/lenovo/x201/Makefile.inc b/src/mainboard/lenovo/x201/Makefile.inc new file mode 100644 index 0000000..9055c9e --- /dev/null +++ b/src/mainboard/lenovo/x201/Makefile.inc @@ -0,0 +1,24 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +smm-$(CONFIG_HAVE_SMI_HANDLER) += dock.c +romstage-y += dock.c +ramstage-y += dock.c +ramstage-y += gma.c + diff --git a/src/mainboard/lenovo/x201/acpi/dock.asl b/src/mainboard/lenovo/x201/acpi/dock.asl new file mode 100644 index 0000000..732ee90 --- /dev/null +++ b/src/mainboard/lenovo/x201/acpi/dock.asl @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle <svens(a)stackframe.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "smi.h" + +Scope (\_SB) +{ + Device(DOCK) + { + Name(_HID, "ACPI0003") + Name(_UID, 0x00) + Name(_PCL, Package() { \_SB } ) + + Method(_DCK, 1, NotSerialized) + { + if (Arg0) { + /* connect dock */ + Store (1, \_SB.PCI0.LPCB.EC.DKR1) + Store (1, \_SB.PCI0.LPCB.EC.DKR2) + Store (1, \_SB.PCI0.LPCB.EC.DKR3) + } else { + /* disconnect dock */ + Store (0, \_SB.PCI0.LPCB.EC.DKR1) + Store (0, \_SB.PCI0.LPCB.EC.DKR2) + Store (0, \_SB.PCI0.LPCB.EC.DKR3) + } + Xor(Arg0, \_SB.PCI0.LPCB.EC.DKR1, Local0) + Return (Local0) + } + + Method(_STA, 0, NotSerialized) + { + Return (\_SB.PCI0.LPCB.EC.DKR1) + } + } +} + +Scope(\_SB.PCI0.LPCB.EC) +{ + Method(_Q18, 0, NotSerialized) + { + Notify(\_SB.DOCK, 3) + } + + Method(_Q45, 0, NotSerialized) + { + Notify(\_SB.DOCK, 3) + } + + Method(_Q50, 0, NotSerialized) + { + Notify(\_SB.DOCK, 3) + } + + Method(_Q58, 0, NotSerialized) + { + Notify(\_SB.DOCK, 0) + } + + Method(_Q37, 0, NotSerialized) + { + Notify(\_SB.DOCK, 0) + } +} diff --git a/src/mainboard/lenovo/x201/acpi/ec.asl b/src/mainboard/lenovo/x201/acpi/ec.asl new file mode 100644 index 0000000..4b3e72c --- /dev/null +++ b/src/mainboard/lenovo/x201/acpi/ec.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle <svens(a)stackframe.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <ec/lenovo/h8/acpi/ec.asl> + +Scope(\_SB.PCI0.LPCB.EC) +{ +} diff --git a/src/mainboard/lenovo/x201/acpi/gpe.asl b/src/mainboard/lenovo/x201/acpi/gpe.asl new file mode 100644 index 0000000..b160b50 --- /dev/null +++ b/src/mainboard/lenovo/x201/acpi/gpe.asl @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle <svens(a)stackframe.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "smi.h" +Scope (\_GPE) +{ + Method(_L18, 0, NotSerialized) + { + /* Read EC register to clear wake status */ + Store(\_SB.PCI0.LPCB.EC.WAKE, Local0) + } +} diff --git a/src/mainboard/lenovo/x201/acpi/mainboard.asl b/src/mainboard/lenovo/x201/acpi/mainboard.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/lenovo/x201/acpi/platform.asl b/src/mainboard/lenovo/x201/acpi/platform.asl new file mode 100644 index 0000000..ac45401 --- /dev/null +++ b/src/mainboard/lenovo/x201/acpi/platform.asl @@ -0,0 +1,184 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* These come from the dynamically created CPU SSDT */ +External(PDC0) +External(PDC1) + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + \_SB.PCI0.LPCB.EC.MUTE(1) + \_SB.PCI0.LPCB.EC.USBP(0) +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + // CPU specific part + + // Notify PCI Express slots in case a card + // was inserted while a sleep state was active. + + // Are we going to S3? + If (LEqual(Arg0, 3)) { + // .. + } + + // Are we going to S4? + If (LEqual(Arg0, 4)) { + // .. + } + + // TODO: Windows XP SP2 P-State restore + + Return(Package(){0,0}) +} + +/* System Bus */ + +Scope(\_SB) +{ + /* This method is placed on the top level, so we can make sure it's the + * first executed _INI method. + */ + Method(_INI, 0) + { + /* The DTS data in NVS is probably not up to date. + * Update temperature values and make sure AP thermal + * interrupts can happen + */ + + // TRAP(71) // TODO + + /* Determine the Operating System and save the value in OSYS. + * We have to do this in order to be able to work around + * certain windows bugs. + * + * OSYS value | Operating System + * -----------+------------------ + * 2000 | Windows 2000 + * 2001 | Windows XP(+SP1) + * 2002 | Windows XP SP2 + * 2006 | Windows Vista + * ???? | Windows 7 + */ + + /* Let's assume we're running at least Windows 2000 */ + Store (2000, OSYS) + + If (CondRefOf(_OSI, Local0)) { + If (_OSI("Windows 2001")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP2")) { + Store (2002, OSYS) + } + + If (_OSI("Windows 2001.1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001.1 SP1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2006")) { + Store (2006, OSYS) + } + + If (_OSI("Windows 2006.1")) { + Store (2006, OSYS) + } + + If (_OSI("Windows 2006 SP1")) { + Store (2006, OSYS) + } + + If (_OSI("Windows 2009")) { + Store (2009, OSYS) + } + + If (_OSI("Windows 2012")) { + Store (2012, OSYS) + } + } + + /* And the OS workarounds start right after we know what we're + * running: Windows XP SP1 needs to have C-State coordination + * enabled in SMM. + */ + If (LAnd(LEqual(OSYS, 2001), MPEN)) { + // TRAP(61) // TODO + } + + /* SMM power state and C4-on-C3 settings need to be updated */ + // TRAP(43) // TODO + } +} + diff --git a/src/mainboard/lenovo/x201/acpi/superio.asl b/src/mainboard/lenovo/x201/acpi/superio.asl new file mode 100644 index 0000000..9b201b0 --- /dev/null +++ b/src/mainboard/lenovo/x201/acpi/superio.asl @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2013 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + Device (PS2K) // Keyboard + { + Name(_HID, EISAID("PNP0303")) + Name(_CID, EISAID("PNP030B")) + + Name(_CRS, ResourceTemplate() + { + IO (Decode16, 0x60, 0x60, 0x01, 0x01) + IO (Decode16, 0x64, 0x64, 0x01, 0x01) + IRQ (Edge, ActiveHigh, Exclusive) { 0x01 } // IRQ 1 + }) + + Method (_STA, 0) + { + Return (0xf) + } + } + + Device (PS2M) // Mouse + { + Name(_HID, EISAID("PNP0F13")) + Name(_CRS, ResourceTemplate() + { + IRQ (Edge, ActiveHigh, Exclusive) { 0x0c } // IRQ 12 + }) + + Method(_STA, 0) + { + Return (0xf) + } + } diff --git a/src/mainboard/lenovo/x201/acpi/video.asl b/src/mainboard/lenovo/x201/acpi/video.asl new file mode 100644 index 0000000..6d20a70 --- /dev/null +++ b/src/mainboard/lenovo/x201/acpi/video.asl @@ -0,0 +1,111 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle <svens(a)stackframe.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "smi.h" + +Scope (\_SB.PCI0.GFX0) +{ + Device (LCD0) + { + Name (_ADR, 0x0400) + Name (BRCT, 0) + + Name (BRIG, Package (0x12) + { + 0x61, + 0x61, + 0x2, + 0x4, + 0x5, + 0x7, + 0x9, + 0xb, + 0xd, + 0x11, + 0x14, + 0x17, + 0x1c, + 0x20, + 0x27, + 0x31, + 0x41, + 0x61, + }) + + Method (_BCL, 0, NotSerialized) + { + Store (1, BRCT) + Return (BRIG) + } + + Method (_BCM, 1, NotSerialized) + { + Store (ShiftLeft (Arg0, 4), ^^BCLV) + Store (0x80000000, ^^CR1) + Store (0x061a061a, ^^CR2) + } + Method (_BQC, 0, NotSerialized) + { + Store (^^BCLV, Local0) + ShiftRight (Local0, 4, Local0) + Return (Local0) + } + + Method(BRID, 1, NotSerialized) + { + Store (Match (BRIG, MEQ, Arg0, MTR, Zero, 2), Local0) + If (LEqual (Local0, Ones)) + { + Return (0x11) + } + Return (Local0) + } + + /* Using Notify is the right way. But Windows doesn't handle it well. + So use both method in a way to avoid double action. */ + Method (DECB, 0, NotSerialized) + { + If (BRCT) { + Notify (LCD0, 0x87) + } Else { + Store (BRID (_BQC ()), Local0) + If (LNotEqual (Local0, 2)) + { + Decrement (Local0) + } + _BCM (DerefOf (Index (BRIG, Local0))) + } + } + Method (INCB, 0, NotSerialized) + { + If (BRCT) { + Notify (LCD0, 0x86) + } Else { + Store (BRID (_BQC ()), Local0) + If (LNotEqual (Local0, 0x11)) + { + Increment (Local0) + } + _BCM (DerefOf (Index (BRIG, Local0))) + } + } + } +} diff --git a/src/mainboard/lenovo/x201/acpi_tables.c b/src/mainboard/lenovo/x201/acpi_tables.c new file mode 100644 index 0000000..37fd12a --- /dev/null +++ b/src/mainboard/lenovo/x201/acpi_tables.c @@ -0,0 +1,283 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013 Vladimir Serbinenko <phcoder(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +extern const unsigned char AmlCode[]; +#if CONFIG_HAVE_ACPI_SLIC +unsigned long acpi_create_slic(unsigned long current); +#endif + +#include "southbridge/intel/i82801gx/nvs.h" +static void acpi_create_gnvs(global_nvs_t * gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + + /* Enable both COM ports */ + gnvs->cmap = 0x01; + gnvs->cmbp = 0x01; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 1, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, + MP_IRQ_POLARITY_DEFAULT | + MP_IRQ_TRIGGER_DEFAULT); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_LEVEL); + + /* LAPIC_NMI */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 0, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 1, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 2, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 3, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, + const char *oem_table_id) +{ + generate_cpu_entries(); + return (unsigned long)(acpigen_get_current()); +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +void smm_setup_structures(void *gnvs, void *tcg, void *smi1); + +#define ALIGN_CURRENT current = (ALIGN(current, 16)) +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + int i; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_xsdt_t *xsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_mcfg_t *mcfg; + acpi_fadt_t *fadt; + acpi_facs_t *facs; +#if CONFIG_HAVE_ACPI_SLIC + acpi_header_t *slic; +#endif + acpi_header_t *ssdt; + acpi_header_t *dsdt; + void *gnvs; + + current = start; + + /* Align ACPI tables to 16byte */ + ALIGN_CURRENT; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + ALIGN_CURRENT; + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + ALIGN_CURRENT; + xsdt = (acpi_xsdt_t *) current; + current += sizeof(acpi_xsdt_t); + ALIGN_CURRENT; + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, xsdt); + acpi_write_rsdt(rsdt); + acpi_write_xsdt(xsdt); + + /* + * We explicitly add these tables later on: + */ + printk(BIOS_DEBUG, "ACPI: * HPET\n"); + + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + ALIGN_CURRENT; + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + printk(BIOS_DEBUG, "ACPI: * MADT\n"); + + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, madt); + + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, mcfg); + + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + ALIGN_CURRENT; + acpi_create_facs(facs); + + dsdt = (acpi_header_t *) current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + + /* Fix up global NVS region for SMI handler. The GNVS region lives + * in the (high) table area. The low memory map looks like this: + * + * 0x00000000 - 0x000003ff Real Mode IVT + * 0x00000020 - 0x0000019c Low MP Table (XXX conflict?) + * 0x00000400 - 0x000004ff BDA (somewhat unused) + * 0x00000500 - 0x0000052f Moved GDT + * 0x00000530 - 0x00000b64 coreboot table + * 0x0007c000 - 0x0007dfff OS boot sector (unused?) + * 0x0007e000 - 0x0007ffff free to use (so no good for acpi+smi) + * 0x00080000 - 0x0009fbff usable ram + * 0x0009fc00 - 0x0009ffff EBDA (unused?) + * 0x000a0000 - 0x000bffff VGA memory + * 0x000c0000 - 0x000cffff VGA option rom + * 0x000d0000 - 0x000dffff free for other option roms? + * 0x000e0000 - 0x000fffff SeaBIOS? (conflict with low tables:) + * 0x000f0000 - 0x000f03ff PIRQ table + * 0x000f0400 - 0x000f66?? ACPI tables + * 0x000f66?? - 0x000f???? DMI tables + */ + + ALIGN_CURRENT; + + /* Pack GNVS into the ACPI table area */ + for (i = 0; i < dsdt->length; i++) { + if (*(u32 *) (((u32) dsdt) + i) == 0xC0DEBABE) { + printk(BIOS_DEBUG, + "ACPI: Patching up global NVS in DSDT at offset 0x%04x -> 0x%08x\n", + i, (u32) current); + *(u32 *) (((u32) dsdt) + i) = current; // 0x92 bytes + break; + } + } + + /* And fill it */ + acpi_create_gnvs((global_nvs_t *) current); + + /* Keep pointer around */ + gnvs = (void *)current; + + current += 0x100; + ALIGN_CURRENT; + + /* And tell SMI about it */ + smm_setup_structures(gnvs, NULL, NULL); + + /* We patched up the DSDT, so we need to recalculate the checksum */ + dsdt->checksum = 0; + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); + + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, + dsdt->length); + +#if CONFIG_HAVE_ACPI_SLIC + printk(BIOS_DEBUG, "ACPI: * SLIC\n"); + slic = (acpi_header_t *) current; + current += acpi_create_slic(current); + ALIGN_CURRENT; + acpi_add_table(rsdp, slic); +#endif + + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + ALIGN_CURRENT; + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *) current; + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "current = %lx\n", current); + printk(BIOS_INFO, "ACPI: done.\n"); + + /* Enable Dummy DCC ON# for DVI */ + printk(BIOS_DEBUG, "Laptop handling...\n"); + outb(inb(0x60f) & ~(1 << 5), 0x60f); + + return current; +} diff --git a/src/mainboard/lenovo/x201/cmos.default b/src/mainboard/lenovo/x201/cmos.default new file mode 100644 index 0000000..4577e70 --- /dev/null +++ b/src/mainboard/lenovo/x201/cmos.default @@ -0,0 +1,11 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +power_on_after_fail=Enable +nmi=Enable +volume=0x3 +first_battery=Primary +bluetooth=Enable +wwan=Enable +touchpad=Enable diff --git a/src/mainboard/lenovo/x201/cmos.layout b/src/mainboard/lenovo/x201/cmos.layout new file mode 100644 index 0000000..7308e66 --- /dev/null +++ b/src/mainboard/lenovo/x201/cmos.layout @@ -0,0 +1,137 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2013 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +400 8 h 0 volume + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + +# coreboot config options: EC +411 1 e 8 first_battery +412 1 e 1 bluetooth +413 1 e 1 wwan +414 1 e 1 touchpad +#415 569 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 Secondary +8 1 Primary +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 + + diff --git a/src/mainboard/lenovo/x201/devicetree.cb b/src/mainboard/lenovo/x201/devicetree.cb new file mode 100644 index 0000000..e17bf41 --- /dev/null +++ b/src/mainboard/lenovo/x201/devicetree.cb @@ -0,0 +1,148 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## Copyright (C) 2011 Sven Schnelle <svens(a)stackframe.org> +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/intel/nehalem + + + # Enable DisplayPort Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable Panel as LVDS and configure power delays + register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_power_cycle_delay" = "3" + register "gpu_panel_power_up_delay" = "250" + register "gpu_panel_power_down_delay" = "250" + register "gpu_panel_power_backlight_on_delay" = "2500" + register "gpu_panel_power_backlight_off_delay" = "2500" + register "gpu_cpu_backlight" = "0x58d" + register "gpu_pch_backlight" = "0x061a061a" + + chip ec/lenovo/pmh7 + device pnp ff.1 on # dummy + end + register "backlight_enable" = "0x01" + register "dock_event_enable" = "0x01" + end + + chip ec/lenovo/h8 + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + + register "config0" = "0xa6" + register "config1" = "0x05" + register "config2" = "0xa0" + register "config3" = "0x01" + + register "beepmask0" = "0xfe" + register "beepmask1" = "0x96" + + register "event2_enable" = "0xff" + register "event3_enable" = "0xff" + register "event4_enable" = "0xf4" + register "event5_enable" = "0x3c" + register "event6_enable" = "0x80" + register "event7_enable" = "0x01" + register "eventc_enable" = "0x3c" + register "event8_enable" = "0x01" + register "event9_enable" = "0xff" + register "eventa_enable" = "0xff" + register "eventb_enable" = "0xff" + register "eventc_enable" = "0xff" + register "eventd_enable" = "0xff" + + register "wlan_enable" = "0x01" + register "trackpoint_enable" = "0x03" + end + + device cpu_cluster 0 on + chip cpu/intel/model_206ax + device lapic 0 on end + end + end + + device domain 0 on + device pci 00.0 on # Host bridge + subsystemid 0x17aa 0x2193 + end + device pci 02.0 on # VGA controller + subsystemid 0x17aa 0x215a + end + chip southbridge/intel/bd82x6x + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x0b" + register "pirqc_routing" = "0x0b" + register "pirqd_routing" = "0x0b" + register "pirqe_routing" = "0x0b" + register "pirqf_routing" = "0x0b" + register "pirqg_routing" = "0x0b" + register "pirqh_routing" = "0x0b" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi1_routing" = "2" + register "gpi13_routing" = "2" + + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x33" + + register "gpe0_en" = "0x20022046" + register "alt_gp_smi_en" = "0x0000" + + device pci 16.2 on # IDE/SATA + subsystemid 0x17aa 0x2161 + end + + device pci 19.0 on # Ethernet + subsystemid 0x17aa 0x2153 + end + + device pci 1a.0 on # USB2 EHCI + subsystemid 0x17aa 0x2163 + end + +# register "c4onc3_enable" = "1" + device pci 1b.0 on # Audio Controller + subsystemid 0x17aa 0x215e + end + device pci 1d.0 on # USB2 EHCI + subsystemid 0x17aa 0x2163 + end + device pci 1f.0 on # PCI-LPC bridge + subsystemid 0x17aa 0x2166 + end + device pci 1f.2 on # IDE/SATA + subsystemid 0x17aa 0x2168 + end + device pci 1f.3 on # SMBUS + subsystemid 0x17aa 0x2167 + end + end + chip southbridge/ricoh/rl5c476 + end + end +end diff --git a/src/mainboard/lenovo/x201/dock.c b/src/mainboard/lenovo/x201/dock.c new file mode 100644 index 0000000..b315fda --- /dev/null +++ b/src/mainboard/lenovo/x201/dock.c @@ -0,0 +1,62 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle <svens(a)stackframe.org> + * Copyright (C) 2013 Vladimir Serbinenko <phcoder(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#if !defined (__PRE_RAM__) && !defined (__SMM__) +#define PCI_DEV(bus, dev, fn) dev_find_slot (bus, PCI_DEVFN (dev, fn)) +#endif +#include <delay.h> +#include "dock.h" +#include "southbridge/intel/bd82x6x/pch.h" +#include <ec/acpi/ec.h> + +int dock_connect(void) +{ + ec_set_bit(0x02, 0); + ec_set_bit(0x1a, 0); + ec_set_bit(0xfe, 4); + return 0; +} + +void dock_disconnect(void) +{ + ec_clr_bit(0x02, 0); + ec_clr_bit(0x1a, 0); + ec_clr_bit(0xfe, 4); +} + +int dock_present(void) +{ + u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; + u8 st = inb(gpiobase + 0x0c); + printk(BIOS_DEBUG, "GPIO status is 0x%x\n", st); + + return !((st >> 3) & 1); +} + +int dock_ultrabay_device_present(void) +{ + return 0; +} diff --git a/src/mainboard/lenovo/x201/dock.h b/src/mainboard/lenovo/x201/dock.h new file mode 100644 index 0000000..141ae48 --- /dev/null +++ b/src/mainboard/lenovo/x201/dock.h @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle <svens(a)stackframe.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef THINKPAD_X60_DOCK_H +#define THINKPAD_X60_DOCK_H + +extern int dock_connect(void); +extern void dock_disconnect(void); +extern int dock_present(void); +extern int dlpc_init(void); +extern int dock_ultrabay_device_present(void); +#endif diff --git a/src/mainboard/lenovo/x201/dsdt.asl b/src/mainboard/lenovo/x201/dsdt.asl new file mode 100644 index 0000000..12b23ce --- /dev/null +++ b/src/mainboard/lenovo/x201/dsdt.asl @@ -0,0 +1,94 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x03, // DSDT revision: ACPI v3.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20130325 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // General Purpose Events + #include "acpi/gpe.asl" + + // mainboard specific devices + #include "acpi/mainboard.asl" + + #include <cpu/intel/model_206ax/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <northbridge/intel/nehalem/acpi/nehalem.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + Device (UNCR) + { + Name (_BBN, 0xFF) + Name (_ADR, 0x00) + Name (RID, 0x00) + Name (_HID, EisaId ("PNP0A03")) + Name (_CRS, ResourceTemplate () + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Granularity + 0x00FF, // Range Minimum + 0x00FF, // Range Maximum + 0x0000, // Translation Offset + 0x0001, // Length + ,, ) + }) + Device (SAD) + { + Name (_ADR, 0x01) + Name (RID, 0x00) + OperationRegion (SADC, PCI_Config, 0x00, 0x0100) + Field (SADC, DWordAcc, NoLock, Preserve) + { + Offset (0x40), + PAM0, 8, + PAM1, 8, + PAM2, 8, + PAM3, 8, + PAM4, 8, + PAM5, 8, + PAM6, 8 + } + } + } + } + + #include "acpi/video.asl" + + /* Chipset specific sleep states */ + #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> + + // Dock support code + #include "acpi/dock.asl" +} diff --git a/src/mainboard/lenovo/x201/fadt.c b/src/mainboard/lenovo/x201/fadt.c new file mode 100644 index 0000000..0639026 --- /dev/null +++ b/src/mainboard/lenovo/x201/fadt.c @@ -0,0 +1,160 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +/* FIXME: This needs to go into a separate .h file + * to be included by the ich7 smi handler, ich7 smi init + * code and the mainboard fadt. + */ + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = + pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + 0x40) & 0xfffe; + + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (unsigned long)facs; + fadt->dsdt = (unsigned long)dsdt; + fadt->model = 0x00; + fadt->preferred_pm_profile = PM_MOBILE; + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = APM_CNT_PST_CONTROL; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 0x10; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = APM_CNT_CST_CONTROL; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 0x23; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x32; + fadt->iapc_boot_arch = 0x00; + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_DOCKING_SUPPORTED; + + fadt->reset_reg.space_id = 0; + fadt->reset_reg.bit_width = 0; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0x0; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 0; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 0; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 32; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 0; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 128; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 0; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, header->length); +} diff --git a/src/mainboard/lenovo/x201/gma.c b/src/mainboard/lenovo/x201/gma.c new file mode 100644 index 0000000..f5347e0 --- /dev/null +++ b/src/mainboard/lenovo/x201/gma.c @@ -0,0 +1,508 @@ +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> + +#include "northbridge/intel/nehalem/nehalem.h" + +unsigned char fake_vbt[] = { + 0x24, 0x56, 0x42, 0x54, 0x20, 0x49, 0x52, 0x4f, 0x4e, 0x4c, 0x41, 0x4b, + 0x45, 0x2d, 0x4d, 0x4f, + 0x42, 0x49, 0x4c, 0x45, 0x64, 0x00, 0x30, 0x00, 0x8e, 0x0f, 0x48, 0x00, + 0x30, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x42, 0x49, 0x4f, 0x53, 0x5f, 0x44, 0x41, 0x54, 0x41, 0x5f, 0x42, 0x4c, + 0x4f, 0x43, 0x4b, 0x20, + 0x9c, 0x00, 0x16, 0x00, 0x5e, 0x0f, 0xfe, 0xea, 0x00, 0x00, 0x64, 0x01, + 0x01, 0x0f, 0x0d, 0x32, + 0x30, 0x32, 0x36, 0x44, 0x43, 0x49, 0x20, 0x49, 0x6e, 0x74, 0x65, 0x6c, + 0x28, 0x52, 0x29, 0x49, + 0x72, 0x6f, 0x6e, 0x6c, 0x61, 0x6b, 0x65, 0x20, 0x4d, 0x6f, 0x62, 0x69, + 0x6c, 0x65, 0x20, 0x50, + 0x43, 0x49, 0x20, 0x41, 0x63, 0x63, 0x65, 0x6c, 0x65, 0x72, 0x61, 0x74, + 0x65, 0x64, 0x20, 0x53, + 0x56, 0x47, 0x41, 0x20, 0x42, 0x49, 0x4f, 0x53, 0x0d, 0x0a, 0x42, 0x75, + 0x69, 0x6c, 0x64, 0x20, + 0x4e, 0x75, 0x6d, 0x62, 0x65, 0x72, 0x3a, 0x20, 0x32, 0x30, 0x32, 0x36, + 0x20, 0x50, 0x43, 0x20, + 0x31, 0x34, 0x2e, 0x33, 0x34, 0x20, 0x20, 0x30, 0x39, 0x2f, 0x32, 0x38, + 0x20, 0x2f, 0x32, 0x30, + 0x31, 0x30, 0x20, 0x20, 0x32, 0x32, 0x3a, 0x32, 0x30, 0x3a, 0x35, 0x32, + 0x0d, 0x0a, 0x44, 0x45, + 0x43, 0x4f, 0x4d, 0x50, 0x49, 0x4c, 0x41, 0x54, 0x49, 0x4f, 0x4e, 0x20, + 0x4f, 0x52, 0x20, 0x44, + 0x49, 0x53, 0x41, 0x53, 0x53, 0x45, 0x4d, 0x42, 0x4c, 0x59, 0x20, 0x50, + 0x52, 0x4f, 0x48, 0x49, + 0x42, 0x49, 0x54, 0x45, 0x44, 0x0d, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x43, 0x6f, + 0x70, 0x79, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x28, 0x43, 0x29, 0x20, + 0x32, 0x30, 0x30, 0x30, + 0x2d, 0x32, 0x30, 0x30, 0x33, 0x20, 0x49, 0x6e, 0x74, 0x65, 0x6c, 0x20, + 0x43, 0x6f, 0x72, 0x70, + 0x2e, 0x20, 0x41, 0x6c, 0x6c, 0x20, 0x52, 0x69, 0x67, 0x68, 0x74, 0x73, + 0x20, 0x52, 0x65, 0x73, + 0x65, 0x72, 0x76, 0x65, 0x64, 0x2e, 0x0d, 0x0a, 0x0d, 0x0a, 0x00, 0x00, + 0xc0, 0x03, 0x08, 0x04, + 0x00, 0x00, 0x00, 0x01, 0x05, 0x00, 0x07, 0x03, 0x00, 0x01, 0x19, 0xfe, + 0x32, 0x00, 0x44, 0x04, + 0x40, 0x06, 0x04, 0x02, 0x09, 0x01, 0x08, 0x0a, 0x02, 0x08, 0x0c, 0x04, + 0x08, 0x03, 0x01, 0x02, + 0x05, 0x01, 0x04, 0x0d, 0x01, 0x04, 0x0b, 0x01, 0x02, 0x07, 0x01, 0x04, + 0x15, 0x01, 0x04, 0x45, + 0x01, 0x04, 0x0e, 0x04, 0x08, 0x46, 0x04, 0x40, 0x28, 0x20, 0x08, 0x48, + 0x40, 0x08, 0x10, 0x00, + 0x02, 0x0d, 0x01, 0x02, 0x04, 0x00, 0x00, 0x21, 0x08, 0x00, 0x22, 0x10, + 0x00, 0x20, 0x00, 0x00, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x90, 0xcd, 0x04, 0x00, 0x00, 0x03, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0xc6, + 0x68, 0x00, 0x20, 0x00, + 0x01, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0xb0, 0xe3, 0x08, 0x00, 0x00, + 0x04, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x20, 0x01, 0x20, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x20, + 0x00, 0x01, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x20, 0x00, 0x01, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x03, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x20, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x03, 0x01, 0x00, 0x00, 0x04, 0x1c, 0x00, 0x30, 0x32, 0x34, 0x36, 0x38, + 0x3a, 0x3c, 0x40, 0x42, + 0x44, 0x46, 0x48, 0x4a, 0x4c, 0x50, 0x52, 0x54, 0x56, 0x58, 0x5a, 0x5c, + 0x80, 0x81, 0x82, 0x83, + 0x84, 0x1a, 0x00, 0xfe, 0xad, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x01, 0x30, 0x00, 0xbf, + 0x06, 0x1e, 0x00, 0x59, + 0x03, 0x28, 0x00, 0x86, 0x03, 0x02, 0x00, 0x90, 0x03, 0x38, 0x00, 0xd1, + 0x03, 0xc8, 0x00, 0x1f, + 0x06, 0x30, 0x00, 0x52, 0x06, 0x18, 0x00, 0x6d, 0x06, 0x18, 0x00, 0x88, + 0x06, 0x18, 0x00, 0x8b, + 0x07, 0x08, 0x00, 0xcf, 0x07, 0x12, 0x00, 0xe1, 0x07, 0x12, 0x00, 0xf3, + 0x07, 0x12, 0x00, 0x05, + 0x08, 0x12, 0x00, 0x1a, 0x08, 0x0a, 0x00, 0x24, 0x08, 0x0a, 0x00, 0x2e, + 0x08, 0x0a, 0x00, 0x38, + 0x08, 0x0a, 0x00, 0x45, 0x08, 0x0a, 0x00, 0x4f, 0x08, 0x0a, 0x00, 0x59, + 0x08, 0x0a, 0x00, 0x63, + 0x08, 0x0a, 0x00, 0x75, 0x08, 0x0a, 0x00, 0x7f, 0x08, 0x0a, 0x00, 0x89, + 0x08, 0x0a, 0x00, 0x93, + 0x08, 0x0a, 0x00, 0x9d, 0x08, 0x0a, 0x00, 0xa7, 0x08, 0x0a, 0x00, 0xb1, + 0x08, 0x0a, 0x00, 0xbb, + 0x08, 0x0a, 0x00, 0xc5, 0x08, 0x0a, 0x00, 0xcf, 0x08, 0x0a, 0x00, 0xd9, + 0x08, 0x0a, 0x00, 0xe3, + 0x08, 0x0a, 0x00, 0xed, 0x08, 0x0a, 0x00, 0xf7, 0x08, 0x0a, 0x00, 0x01, + 0x09, 0x0a, 0x00, 0x0b, + 0x09, 0x0a, 0x00, 0x06, 0x5d, 0x00, 0xfc, 0xff, 0x02, 0x80, 0x00, 0x07, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x11, 0x07, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x10, 0x04, 0x00, 0x8e, 0x29, 0x00, 0x80, 0x9c, 0x01, 0x07, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x9c, 0x11, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0xff, 0xff, 0x07, 0x07, 0x00, 0xfe, 0xff, 0xce, 0x18, 0x00, 0xff, + 0xff, 0x08, 0x3d, 0x00, + 0xfc, 0xff, 0x02, 0x40, 0xf0, 0x04, 0x00, 0x01, 0x00, 0x00, 0x01, 0x44, + 0xf0, 0x04, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x48, 0xf0, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4c, + 0xf0, 0x04, 0x00, 0x00, + 0x00, 0x03, 0x03, 0x50, 0xf0, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x54, + 0xf0, 0x04, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x58, 0xf0, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, + 0xff, 0x0a, 0xcb, 0x00, + 0x0a, 0x80, 0x04, 0x60, 0x03, 0xff, 0xff, 0xff, 0xbf, 0xff, 0xff, 0x00, + 0x05, 0x58, 0x02, 0xff, + 0xff, 0xff, 0xbf, 0xff, 0xff, 0x00, 0x05, 0xc0, 0x03, 0xff, 0xff, 0xff, + 0xbf, 0xff, 0xff, 0x80, + 0x07, 0xa0, 0x05, 0xff, 0xff, 0xff, 0xbf, 0xff, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0xff, 0xff, 0x40, 0x07, 0x70, 0x05, 0xff, 0xff, 0xff, 0xbf, 0xff, + 0xff, 0x00, 0x07, 0x40, + 0x05, 0xff, 0xff, 0xff, 0xbf, 0xff, 0xff, 0x80, 0x02, 0xe0, 0x01, 0xff, + 0x1b, 0xfe, 0x07, 0xff, + 0xff, 0x20, 0x03, 0x58, 0x02, 0xff, 0x1b, 0xfe, 0x07, 0xff, 0xff, 0x00, + 0x04, 0x00, 0x03, 0xff, + 0x1b, 0xfe, 0x07, 0xff, 0xff, 0x40, 0x06, 0xb0, 0x04, 0xff, 0x1b, 0xff, + 0x07, 0xff, 0xff, 0x00, + 0x08, 0x00, 0x06, 0xff, 0xdb, 0xff, 0x07, 0xff, 0xff, 0x00, 0x05, 0x00, + 0x04, 0xff, 0x1b, 0xfe, + 0x07, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, + 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xff, + 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xff, 0xff, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x0b, + 0xc7, 0x00, 0x21, 0x40, + 0x00, 0x00, 0x00, 0x03, 0x20, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x01, + 0x05, 0x70, 0x1d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x40, 0x00, 0x00, 0x00, 0x03, 0x20, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x02, 0x05, 0x72, 0x1d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x50, 0x00, 0x00, 0x00, 0x03, 0x20, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x03, 0x20, 0x00, 0x00, 0x20, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x03, 0x20, 0x00, 0x00, 0x20, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x03, 0x20, 0x00, 0x00, + 0x20, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x11, 0x00, 0x4a, 0x00, 0x04, 0x00, + 0x03, 0x08, 0x3c, 0x84, + 0x0e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x00, 0x00, 0x0d, 0x03, 0x00, + 0xf7, 0x03, 0xc8, 0x0e, + 0x09, 0x00, 0x01, 0x90, 0x05, 0x5a, 0x00, 0xec, 0x05, 0x2d, 0x00, 0x0f, + 0x8b, 0x00, 0x09, 0x0a, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x09, 0x05, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x84, 0x00, + 0x10, 0x00, 0x03, 0x08, + 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x08, 0x00, 0x04, 0x00, 0x00, 0x04, + 0x08, 0x00, 0x40, 0x00, + 0x00, 0x40, 0x08, 0x00, 0x20, 0x00, 0x00, 0x20, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x08, + 0x00, 0x03, 0x08, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x08, 0x00, 0x04, + 0x00, 0x00, 0x04, 0x08, + 0x00, 0x40, 0x00, 0x00, 0x40, 0x08, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, + 0x03, 0x01, 0x00, 0x00, + 0x01, 0x08, 0x00, 0x00, 0x08, 0x00, 0x02, 0x00, 0x00, 0x01, 0x04, 0x00, + 0x04, 0x00, 0x00, 0x04, + 0x08, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x03, 0x01, 0x00, 0x00, 0x01, + 0x08, 0x00, 0x00, 0x08, + 0x00, 0x02, 0x00, 0x00, 0x01, 0x04, 0x00, 0x04, 0x00, 0x00, 0x04, 0x08, + 0x00, 0x00, 0x00, 0x00, + 0x11, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, + 0x0c, 0x00, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x13, 0x20, + 0x00, 0x0f, 0x02, 0x09, + 0x00, 0x05, 0x00, 0x03, 0x00, 0x00, 0x09, 0x00, 0x05, 0x00, 0x03, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x14, 0x9e, 0x00, + 0x06, 0x1a, 0x03, 0xff, 0x00, 0x03, 0xe0, 0x01, 0x07, 0x3c, 0x40, 0x0b, + 0x00, 0xc0, 0x30, 0xe0, + 0x14, 0x10, 0x18, 0x48, 0x36, 0x00, 0x05, 0xa3, 0x10, 0x00, 0x00, 0x18, + 0x03, 0xff, 0xc0, 0x03, + 0x58, 0x02, 0x07, 0x3c, 0xc8, 0x11, 0xc0, 0x00, 0x31, 0x58, 0x18, 0x20, + 0x20, 0x60, 0x36, 0x00, + 0x05, 0xa3, 0x10, 0x00, 0x00, 0x18, 0x03, 0xff, 0x00, 0x05, 0x20, 0x03, + 0x07, 0x3c, 0x9e, 0x20, + 0x00, 0x90, 0x51, 0x20, 0x1f, 0x30, 0x48, 0x80, 0x36, 0x00, 0x05, 0xa3, + 0x10, 0x00, 0x00, 0x18, + 0x03, 0xff, 0x00, 0x03, 0xe0, 0x01, 0x07, 0x32, 0x2c, 0x09, 0x00, 0xa0, + 0x30, 0xe0, 0x1a, 0x10, + 0x18, 0x10, 0x36, 0x00, 0x05, 0xa3, 0x10, 0x00, 0x00, 0x18, 0x03, 0xff, + 0xc0, 0x03, 0x58, 0x02, + 0x07, 0x32, 0xb2, 0x0d, 0xc0, 0xa0, 0x30, 0x58, 0x1a, 0x20, 0x18, 0x10, + 0x36, 0x00, 0x05, 0xa3, + 0x10, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x3c, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x16, 0x4b, + 0x00, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x00, 0x00, 0x08, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x30, 0x84, 0x0e, 0x00, 0x00, 0x4c, 0x46, 0x50, 0x5f, + 0x50, 0x61, 0x6e, 0x65, + 0x6c, 0x4e, 0x61, 0x6d, 0x65, 0x4c, 0x46, 0x50, 0x5f, 0x50, 0x61, 0x6e, + 0x65, 0x6c, 0x4e, 0x61, + 0x6d, 0x65, 0x4c, 0x46, 0x50, 0x5f, 0x50, 0x61, 0x6e, 0x65, 0x6c, 0x4e, + 0x61, 0x6d, 0x65, 0x4c, + 0x46, 0x50, 0x5f, 0x50, 0x61, 0x6e, 0x65, 0x6c, 0x4e, 0x61, 0x6d, 0x65, + 0x17, 0x48, 0x00, 0x64, + 0x19, 0x00, 0x40, 0x41, 0x00, 0x26, 0x30, 0x18, 0x88, 0x36, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x18, 0x30, 0x2a, 0x00, 0x98, 0x51, 0x00, 0x30, 0x40, 0x30, 0x70, 0x13, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x1e, 0xa8, 0x2f, 0x78, 0xe0, 0x51, 0x1a, 0x26, 0x40, 0x58, + 0x98, 0x13, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x1e, 0x48, 0x3f, 0x40, 0x30, 0x62, 0xb0, 0x32, + 0x40, 0x40, 0xc0, 0x13, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x18, 0x28, 0x00, 0x36, 0x7f, + 0x03, 0x00, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x0c, 0x36, 0x7f, 0x05, 0x00, 0x02, 0x00, 0x00, 0x00, + 0x00, 0x0c, 0x36, 0x7f, + 0x01, 0x90, 0x03, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x36, 0x7f, 0x06, 0x00, + 0x04, 0x00, 0x00, 0x00, + 0x00, 0x0c, 0x19, 0x28, 0x00, 0x19, 0x00, 0xfa, 0x00, 0xfa, 0x00, 0x19, + 0x00, 0x90, 0x01, 0x20, + 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xc8, 0x00, 0x40, 0x00, 0x40, + 0x00, 0x40, 0x00, 0x40, + 0x00, 0x2c, 0x01, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x2c, + 0x01, 0x1a, 0x02, 0x00, + 0x00, 0x40, 0x1b, 0xc8, 0x00, 0xd0, 0x07, 0x0a, 0x00, 0xd0, 0x07, 0xf4, + 0x01, 0x88, 0x13, 0xd0, + 0x07, 0x0a, 0x00, 0xd0, 0x07, 0xf4, 0x01, 0x88, 0x13, 0xd0, 0x07, 0x0a, + 0x00, 0xd0, 0x07, 0xf4, + 0x01, 0x88, 0x13, 0xd0, 0x07, 0x0a, 0x00, 0xd0, 0x07, 0xf4, 0x01, 0x88, + 0x13, 0xd0, 0x07, 0x0a, + 0x00, 0xd0, 0x07, 0xf4, 0x01, 0x88, 0x13, 0xd0, 0x07, 0x0a, 0x00, 0xd0, + 0x07, 0xf4, 0x01, 0x88, + 0x13, 0xd0, 0x07, 0x0a, 0x00, 0xd0, 0x07, 0xf4, 0x01, 0x88, 0x13, 0xd0, + 0x07, 0x0a, 0x00, 0xd0, + 0x07, 0xf4, 0x01, 0x88, 0x13, 0xd0, 0x07, 0x0a, 0x00, 0xd0, 0x07, 0xf4, + 0x01, 0x88, 0x13, 0xd0, + 0x07, 0x0a, 0x00, 0xd0, 0x07, 0xf4, 0x01, 0x88, 0x13, 0xd0, 0x07, 0x0a, + 0x00, 0xd0, 0x07, 0xf4, + 0x01, 0x88, 0x13, 0xd0, 0x07, 0x0a, 0x00, 0xd0, 0x07, 0xf4, 0x01, 0x88, + 0x13, 0xd0, 0x07, 0x0a, + 0x00, 0xd0, 0x07, 0xf4, 0x01, 0x88, 0x13, 0xd0, 0x07, 0x0a, 0x00, 0xd0, + 0x07, 0xf4, 0x01, 0x88, + 0x13, 0xd0, 0x07, 0x0a, 0x00, 0xd0, 0x07, 0xf4, 0x01, 0x88, 0x13, 0xd0, + 0x07, 0x0a, 0x00, 0xd0, + 0x07, 0xf4, 0x01, 0x88, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x28, 0x18, 0x00, + 0x01, 0x00, 0x73, 0x00, 0x54, 0x05, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa8, 0x0a, 0x00, 0x00, 0x29, 0x94, 0x00, 0x03, + 0xf2, 0x09, 0x20, 0x18, + 0x0a, 0x12, 0x2a, 0x0a, 0x0a, 0x34, 0x0a, 0x20, 0x5a, 0x0a, 0x12, 0x6c, + 0x0a, 0x0a, 0x76, 0x0a, + 0x20, 0x9c, 0x0a, 0x12, 0xae, 0x0a, 0x0a, 0xb8, 0x0a, 0x20, 0xde, 0x0a, + 0x12, 0xf0, 0x0a, 0x0a, + 0xfa, 0x0a, 0x20, 0x20, 0x0b, 0x12, 0x32, 0x0b, 0x0a, 0x3c, 0x0b, 0x20, + 0x62, 0x0b, 0x12, 0x74, + 0x0b, 0x0a, 0x7e, 0x0b, 0x20, 0xa4, 0x0b, 0x12, 0xb6, 0x0b, 0x0a, 0xc0, + 0x0b, 0x20, 0xe6, 0x0b, + 0x12, 0xf8, 0x0b, 0x0a, 0x02, 0x0c, 0x20, 0x28, 0x0c, 0x12, 0x3a, 0x0c, + 0x0a, 0x44, 0x0c, 0x20, + 0x6a, 0x0c, 0x12, 0x7c, 0x0c, 0x0a, 0x86, 0x0c, 0x20, 0xac, 0x0c, 0x12, + 0xbe, 0x0c, 0x0a, 0xc8, + 0x0c, 0x20, 0xee, 0x0c, 0x12, 0x00, 0x0d, 0x0a, 0x0a, 0x0d, 0x20, 0x30, + 0x0d, 0x12, 0x42, 0x0d, + 0x0a, 0x4c, 0x0d, 0x20, 0x72, 0x0d, 0x12, 0x84, 0x0d, 0x0a, 0x8e, 0x0d, + 0x20, 0xb4, 0x0d, 0x12, + 0xc6, 0x0d, 0x0a, 0xd0, 0x0d, 0x20, 0xf6, 0x0d, 0x12, 0x08, 0x0e, 0x0a, + 0x12, 0x0e, 0x0d, 0x2a, + 0xf0, 0x04, 0x80, 0x02, 0xe0, 0x01, 0x80, 0x11, 0x0e, 0x00, 0x00, 0x03, + 0x00, 0x00, 0x08, 0x72, + 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x0c, 0x72, 0x0c, 0x00, 0xc4, 0x09, + 0xfa, 0x00, 0x10, 0x72, + 0x0c, 0x00, 0x05, 0x0f, 0x27, 0x00, 0xff, 0xff, 0xd6, 0x09, 0x80, 0x90, + 0x20, 0xe0, 0x1d, 0x10, + 0x08, 0x60, 0x22, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x36, 0x7f, + 0x01, 0x00, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x0c, 0x00, 0x05, 0x20, 0x03, 0x80, 0x11, 0x0e, 0x00, + 0x00, 0x03, 0x00, 0x00, + 0x08, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x0c, 0x72, 0x0c, 0x00, + 0xc4, 0x09, 0xfa, 0x00, + 0x10, 0x72, 0x0c, 0x00, 0x03, 0x0f, 0x27, 0x00, 0xff, 0xff, 0x12, 0x1b, + 0x00, 0x80, 0x50, 0x20, + 0x14, 0x30, 0x18, 0x20, 0x44, 0x00, 0x05, 0xa3, 0x10, 0x00, 0x00, 0x1f, + 0x30, 0xae, 0x11, 0x40, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x13, 0xa0, 0x05, 0x84, 0x03, 0x80, 0x11, + 0x0e, 0x00, 0x00, 0x03, + 0x00, 0x00, 0x08, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x0c, 0x72, + 0x0c, 0x00, 0xc4, 0x09, + 0xfa, 0x00, 0x10, 0x72, 0x0c, 0x00, 0x03, 0x0f, 0x27, 0x00, 0xff, 0xff, + 0xf0, 0x1c, 0xa0, 0xa0, + 0x50, 0x84, 0x1a, 0x30, 0x18, 0x10, 0x36, 0x00, 0x05, 0xa3, 0x10, 0x00, + 0x00, 0x18, 0x30, 0xae, + 0x14, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x05, 0x20, 0x03, + 0x80, 0x11, 0x0e, 0x00, + 0x3c, 0x03, 0x00, 0x00, 0x08, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, + 0x0c, 0x72, 0x0c, 0x00, + 0xc4, 0x09, 0xfa, 0x00, 0x10, 0x72, 0x0c, 0x00, 0x03, 0x0f, 0x27, 0x00, + 0xff, 0xff, 0x64, 0x19, + 0x00, 0x40, 0x41, 0x00, 0x26, 0x30, 0x18, 0x88, 0x36, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x18, + 0x30, 0xae, 0x31, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x05, + 0x20, 0x03, 0x80, 0x11, + 0x0e, 0x00, 0x3c, 0x03, 0x00, 0x00, 0x08, 0x72, 0x0c, 0x00, 0xc4, 0x09, + 0xfa, 0x00, 0x0c, 0x72, + 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x10, 0x72, 0x0c, 0x00, 0x03, 0x0f, + 0x27, 0x00, 0xff, 0xff, + 0xc7, 0x1b, 0x00, 0xa0, 0x50, 0x20, 0x17, 0x30, 0x30, 0x20, 0x36, 0x00, + 0x05, 0xa3, 0x10, 0x00, + 0x00, 0x18, 0x30, 0xae, 0x11, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, + 0x00, 0x05, 0x20, 0x03, + 0x80, 0x11, 0x0e, 0x00, 0x3c, 0x03, 0x00, 0x00, 0x08, 0x72, 0x0c, 0x00, + 0xc4, 0x09, 0xfa, 0x00, + 0x0c, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x10, 0x72, 0x0c, 0x00, + 0x03, 0x0f, 0x27, 0x00, + 0xff, 0xff, 0xc0, 0x1b, 0x00, 0xab, 0x50, 0x20, 0x10, 0x30, 0x34, 0x40, + 0x33, 0x00, 0x05, 0xa3, + 0x10, 0x00, 0x00, 0x19, 0x30, 0xae, 0x11, 0x40, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x13, 0x00, 0x05, + 0x20, 0x03, 0x80, 0x11, 0x0e, 0x00, 0x3c, 0x03, 0x00, 0x00, 0x08, 0x72, + 0x0c, 0x00, 0xc4, 0x09, + 0xfa, 0x00, 0x0c, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x10, 0x72, + 0x0c, 0x00, 0x03, 0x0f, + 0x27, 0x00, 0xff, 0xff, 0xcc, 0x1b, 0x00, 0xa1, 0x50, 0x20, 0x17, 0x30, + 0x31, 0x20, 0x36, 0x00, + 0x05, 0xa3, 0x10, 0x00, 0x00, 0x19, 0x30, 0xae, 0x10, 0x40, 0x00, 0x00, + 0x00, 0x00, 0x2d, 0x12, + 0x00, 0x05, 0x00, 0x03, 0x80, 0x11, 0x0e, 0x00, 0x00, 0x03, 0x00, 0x00, + 0x08, 0x72, 0x0c, 0x00, + 0xc4, 0x09, 0xfa, 0x00, 0x0c, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, + 0x10, 0x72, 0x0c, 0x00, + 0x03, 0x0f, 0x27, 0x00, 0xff, 0xff, 0xa9, 0x1a, 0x00, 0xa0, 0x50, 0x00, + 0x0a, 0x30, 0x30, 0x20, + 0x2a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x36, 0x7f, 0x03, 0x90, + 0x08, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x90, 0x06, 0x1a, 0x04, 0x80, 0x11, 0x0e, 0x00, 0x3c, 0x03, + 0x00, 0x00, 0x08, 0x72, + 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x0c, 0x72, 0x0c, 0x00, 0xc4, 0x09, + 0xfa, 0x00, 0x10, 0x72, + 0x0c, 0x00, 0x03, 0x0f, 0x27, 0x00, 0xff, 0xff, 0x7c, 0x2e, 0x90, 0xa0, + 0x60, 0x1a, 0x1e, 0x40, + 0x30, 0x20, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x36, 0x7f, + 0x04, 0x90, 0x09, 0x00, + 0x00, 0x00, 0x00, 0x0c, 0x80, 0x07, 0xb0, 0x04, 0x80, 0x11, 0x0e, 0x00, + 0x3c, 0x03, 0x00, 0x00, + 0x08, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x0c, 0x72, 0x0c, 0x00, + 0xc4, 0x09, 0xfa, 0x00, + 0x10, 0x72, 0x0c, 0x00, 0x05, 0x0f, 0x27, 0x00, 0xff, 0xff, 0x28, 0x3c, + 0x80, 0xa0, 0x70, 0xb0, + 0x23, 0x40, 0x30, 0x20, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, + 0x36, 0x7f, 0x05, 0x90, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x04, 0x00, 0x03, 0x80, 0x11, + 0x0e, 0x00, 0x00, 0x03, + 0x00, 0x00, 0x08, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x0c, 0x72, + 0x0c, 0x00, 0xc4, 0x09, + 0xfa, 0x00, 0x10, 0x72, 0x0c, 0x00, 0x05, 0x0f, 0x27, 0x00, 0xff, 0xff, + 0x64, 0x19, 0x00, 0x40, + 0x41, 0x00, 0x26, 0x30, 0x18, 0x88, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x1e, 0x36, 0x7f, + 0x03, 0x00, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x04, 0x00, 0x03, + 0x80, 0x11, 0x0e, 0x00, + 0x00, 0x03, 0x00, 0x00, 0x08, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, + 0x0c, 0x72, 0x0c, 0x00, + 0xc4, 0x09, 0xfa, 0x00, 0x10, 0x72, 0x0c, 0x00, 0x03, 0x0f, 0x27, 0x00, + 0xff, 0xff, 0x64, 0x19, + 0x00, 0x40, 0x41, 0x00, 0x26, 0x30, 0x18, 0x88, 0x36, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x1e, + 0x36, 0x7f, 0x03, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x04, + 0x00, 0x03, 0x80, 0x11, + 0x0e, 0x00, 0x00, 0x03, 0x00, 0x00, 0x08, 0x72, 0x0c, 0x00, 0xc4, 0x09, + 0xfa, 0x00, 0x0c, 0x72, + 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x10, 0x72, 0x0c, 0x00, 0x03, 0x0f, + 0x27, 0x00, 0xff, 0xff, + 0x64, 0x19, 0x00, 0x40, 0x41, 0x00, 0x26, 0x30, 0x18, 0x88, 0x36, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x1e, 0x36, 0x7f, 0x03, 0x00, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x0c, + 0x00, 0x05, 0x20, 0x03, + 0x80, 0x11, 0x0e, 0x00, 0x00, 0x03, 0x00, 0x00, 0x08, 0x72, 0x0c, 0x00, + 0xc4, 0x09, 0xfa, 0x00, + 0x0c, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x10, 0x72, 0x0c, 0x00, + 0x03, 0x0f, 0x27, 0x00, + 0xff, 0xff, 0xea, 0x1a, 0x00, 0xa0, 0x50, 0x20, 0x17, 0x30, 0x0c, 0x30, + 0x43, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x1e, 0x36, 0x7f, 0x03, 0x00, 0x0e, 0x00, 0x00, 0x00, + 0x00, 0x0c, 0x00, 0x05, + 0x58, 0x02, 0x80, 0x11, 0x0e, 0x00, 0x00, 0x03, 0x00, 0x00, 0x08, 0x72, + 0x0c, 0x00, 0xc4, 0x09, + 0xfa, 0x00, 0x0c, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, 0x10, 0x72, + 0x0c, 0x00, 0x03, 0x0f, + 0x27, 0x00, 0xff, 0xff, 0x06, 0x18, 0x00, 0x70, 0x51, 0x58, 0x15, 0x20, + 0x38, 0x80, 0x13, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x36, 0x7f, 0x03, 0x00, 0x0f, 0x00, + 0x00, 0x00, 0x00, 0x0c, + 0x00, 0x08, 0x00, 0x06, 0x80, 0x11, 0x0e, 0x00, 0x3c, 0x03, 0x00, 0x00, + 0x08, 0x72, 0x0c, 0x00, + 0xc4, 0x09, 0xfa, 0x00, 0x0c, 0x72, 0x0c, 0x00, 0xc4, 0x09, 0xfa, 0x00, + 0x10, 0x72, 0x0c, 0x00, + 0x03, 0x0f, 0x27, 0x00, 0xff, 0xff, 0x29, 0x40, 0x00, 0x60, 0x80, 0x00, + 0x13, 0x60, 0x10, 0x10, + 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x36, 0x7f, 0x03, 0x00, + 0x10, 0x00, 0x00, 0x00, + 0x00, 0x0c, 0x70, 0x61, 0x6e, 0x65, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x4d, + 0x50, 0x57, 0x58, 0x47, 0x41, 0x32, 0x32, 0x30, 0x4e, 0x49, 0x54, 0x00, + 0x4d, 0x50, 0x57, 0x58, + 0x47, 0x41, 0x2b, 0x32, 0x35, 0x30, 0x4e, 0x49, 0x54, 0x43, 0x5f, 0x44, + 0x42, 0x34, 0x30, 0x30, + 0x4e, 0x49, 0x54, 0x00, 0x00, 0x00, 0x43, 0x5f, 0x4d, 0x54, 0x50, 0x33, + 0x30, 0x30, 0x4e, 0x49, + 0x54, 0x00, 0x00, 0x43, 0x5f, 0x50, 0x50, 0x32, 0x32, 0x30, 0x4e, 0x49, + 0x54, 0x00, 0x00, 0x00, + 0x4d, 0x50, 0x43, 0x5f, 0x43, 0x43, 0x46, 0x4c, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x70, 0x61, 0x6e, + 0x65, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x61, + 0x6e, 0x65, 0x6c, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x61, 0x6e, 0x65, 0x6c, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x70, 0x61, 0x6e, 0x65, 0x6c, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x70, 0x61, 0x6e, 0x65, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x70, 0x61, + 0x6e, 0x65, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, + 0x61, 0x6e, 0x65, 0x6c, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x61, 0x6e, 0x65, + 0x6c, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x61, 0x6e, 0x65, 0x6c, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x2b, 0x61, 0x00, 0x06, 0x4e, 0xdc, 0x00, 0x00, 0x58, 0xaa, + 0x4a, 0x71, 0x02, 0x04, + 0x58, 0xaa, 0x4a, 0xa5, 0x00, 0x04, 0x58, 0xaa, 0x4a, 0x96, 0x00, 0x02, + 0x58, 0xaa, 0x4a, 0x5a, + 0x00, 0x04, 0x58, 0xaa, 0x4a, 0xff, 0x00, 0x05, 0x58, 0xaa, 0x4a, 0xa5, + 0x00, 0x16, 0x58, 0xaa, + 0x4e, 0xdc, 0x00, 0x00, 0x58, 0xaa, 0x4e, 0xdc, 0x00, 0x00, 0x58, 0xaa, + 0x4e, 0xdc, 0x00, 0x00, + 0x58, 0xaa, 0x4e, 0xdc, 0x00, 0x00, 0x58, 0xaa, 0x4e, 0xdc, 0x00, 0x00, + 0x58, 0xaa, 0x4e, 0xdc, + 0x00, 0x00, 0x58, 0xaa, 0x4e, 0xdc, 0x00, 0x00, 0x58, 0xaa, 0x4e, 0xdc, + 0x00, 0x00, 0x58, 0xaa, + 0x4e, 0xdc, 0x00, 0x00, 0x58, 0xaa, 0x2c, 0x15, 0x00, 0x09, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, +}; diff --git a/src/mainboard/lenovo/x201/gpio.h b/src/mainboard/lenovo/x201/gpio.h new file mode 100644 index 0000000..40b1de0 --- /dev/null +++ b/src/mainboard/lenovo/x201/gpio.h @@ -0,0 +1,416 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef STUMPY_GPIO_H +#define STUMPY_GPIO_H + +#include "southbridge/intel/bd82x6x/gpio.h" + +/* + * GPIO SET 1 includes GPIO0 to GPIO31 + */ +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_NATIVE, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_NATIVE, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio0 = GPIO_RESET_PWROK, + .gpio1 = GPIO_RESET_PWROK, + .gpio2 = GPIO_RESET_PWROK, + .gpio3 = GPIO_RESET_PWROK, + .gpio4 = GPIO_RESET_PWROK, + .gpio5 = GPIO_RESET_PWROK, + .gpio6 = GPIO_RESET_PWROK, + .gpio7 = GPIO_RESET_PWROK, + .gpio8 = GPIO_RESET_PWROK, + .gpio9 = GPIO_RESET_PWROK, + .gpio10 = GPIO_RESET_PWROK, + .gpio11 = GPIO_RESET_PWROK, + .gpio12 = GPIO_RESET_PWROK, + .gpio13 = GPIO_RESET_PWROK, + .gpio14 = GPIO_RESET_PWROK, + .gpio15 = GPIO_RESET_PWROK, + .gpio16 = GPIO_RESET_PWROK, + .gpio17 = GPIO_RESET_PWROK, + .gpio18 = GPIO_RESET_PWROK, + .gpio19 = GPIO_RESET_PWROK, + .gpio20 = GPIO_RESET_PWROK, + .gpio21 = GPIO_RESET_PWROK, + .gpio22 = GPIO_RESET_PWROK, + .gpio23 = GPIO_RESET_PWROK, + .gpio24 = GPIO_RESET_RSMRST, + .gpio25 = GPIO_RESET_PWROK, + .gpio26 = GPIO_RESET_PWROK, + .gpio27 = GPIO_RESET_PWROK, + .gpio28 = GPIO_RESET_PWROK, + .gpio29 = GPIO_RESET_PWROK, + .gpio30 = GPIO_RESET_RSMRST, + .gpio31 = GPIO_RESET_PWROK, +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio18 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_INPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio30 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_HIGH, + .gpio1 = GPIO_LEVEL_HIGH, + .gpio2 = GPIO_LEVEL_HIGH, + .gpio3 = GPIO_LEVEL_HIGH, + .gpio4 = GPIO_LEVEL_HIGH, + .gpio5 = GPIO_LEVEL_HIGH, + .gpio6 = GPIO_LEVEL_HIGH, + .gpio7 = GPIO_LEVEL_HIGH, + .gpio8 = GPIO_LEVEL_HIGH, + .gpio9 = GPIO_LEVEL_HIGH, + .gpio10 = GPIO_LEVEL_HIGH, + .gpio11 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio13 = GPIO_LEVEL_HIGH, + .gpio14 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_HIGH, + .gpio16 = GPIO_LEVEL_HIGH, + .gpio17 = GPIO_LEVEL_HIGH, + .gpio18 = GPIO_LEVEL_HIGH, + .gpio19 = GPIO_LEVEL_HIGH, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_HIGH, + .gpio22 = GPIO_LEVEL_HIGH, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_HIGH, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_HIGH, + .gpio28 = GPIO_LEVEL_HIGH, + .gpio29 = GPIO_LEVEL_HIGH, + .gpio30 = GPIO_LEVEL_HIGH, + .gpio31 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_set1 pch_gpio_set1_blink = { + .gpio0 = GPIO_NO_BLINK, + .gpio1 = GPIO_NO_BLINK, + .gpio2 = GPIO_NO_BLINK, + .gpio3 = GPIO_NO_BLINK, + .gpio4 = GPIO_NO_BLINK, + .gpio5 = GPIO_NO_BLINK, + .gpio6 = GPIO_NO_BLINK, + .gpio7 = GPIO_NO_BLINK, + .gpio8 = GPIO_NO_BLINK, + .gpio9 = GPIO_NO_BLINK, + .gpio10 = GPIO_NO_BLINK, + .gpio11 = GPIO_NO_BLINK, + .gpio12 = GPIO_NO_BLINK, + .gpio13 = GPIO_NO_BLINK, + .gpio14 = GPIO_NO_BLINK, + .gpio15 = GPIO_NO_BLINK, + .gpio16 = GPIO_NO_BLINK, + .gpio17 = GPIO_NO_BLINK, + .gpio18 = GPIO_NO_BLINK, + .gpio19 = GPIO_NO_BLINK, + .gpio20 = GPIO_NO_BLINK, + .gpio21 = GPIO_NO_BLINK, + .gpio22 = GPIO_NO_BLINK, + .gpio23 = GPIO_NO_BLINK, + .gpio24 = GPIO_NO_BLINK, + .gpio25 = GPIO_NO_BLINK, + .gpio26 = GPIO_NO_BLINK, + .gpio27 = GPIO_NO_BLINK, + .gpio28 = GPIO_NO_BLINK, + .gpio29 = GPIO_NO_BLINK, + .gpio30 = GPIO_NO_BLINK, + .gpio31 = GPIO_NO_BLINK, +}; + +const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio0 = GPIO_NO_INVERT, + .gpio1 = GPIO_INVERT, + .gpio2 = GPIO_INVERT, + .gpio3 = GPIO_NO_INVERT, + .gpio4 = GPIO_NO_INVERT, + .gpio5 = GPIO_NO_INVERT, + .gpio6 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_NO_INVERT, + .gpio9 = GPIO_NO_INVERT, + .gpio10 = GPIO_NO_INVERT, + .gpio11 = GPIO_NO_INVERT, + .gpio12 = GPIO_NO_INVERT, + .gpio13 = GPIO_INVERT, + .gpio14 = GPIO_NO_INVERT, + .gpio15 = GPIO_NO_INVERT, + .gpio16 = GPIO_INVERT, + .gpio17 = GPIO_NO_INVERT, + .gpio18 = GPIO_NO_INVERT, + .gpio19 = GPIO_NO_INVERT, + .gpio20 = GPIO_NO_INVERT, + .gpio21 = GPIO_NO_INVERT, + .gpio22 = GPIO_NO_INVERT, + .gpio23 = GPIO_NO_INVERT, + .gpio24 = GPIO_NO_INVERT, + .gpio25 = GPIO_NO_INVERT, + .gpio26 = GPIO_NO_INVERT, + .gpio27 = GPIO_NO_INVERT, + .gpio28 = GPIO_NO_INVERT, + .gpio29 = GPIO_NO_INVERT, + .gpio30 = GPIO_NO_INVERT, + .gpio31 = GPIO_NO_INVERT, +}; + +/* + * GPIO SET 2 includes GPIO32 to GPIO63 + */ + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_GPIO, + .gpio42 = GPIO_MODE_GPIO, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_OUTPUT, + .gpio42 = GPIO_DIR_OUTPUT, + .gpio43 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_OUTPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio58 = GPIO_DIR_OUTPUT, + .gpio59 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, + .gpio61 = GPIO_DIR_OUTPUT, + .gpio62 = GPIO_DIR_OUTPUT, + .gpio63 = GPIO_DIR_OUTPUT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_HIGH, + .gpio36 = GPIO_LEVEL_HIGH, + .gpio37 = GPIO_LEVEL_HIGH, + .gpio38 = GPIO_LEVEL_HIGH, + .gpio39 = GPIO_LEVEL_HIGH, + .gpio40 = GPIO_LEVEL_HIGH, + .gpio41 = GPIO_LEVEL_HIGH, + .gpio42 = GPIO_LEVEL_HIGH, + .gpio43 = GPIO_LEVEL_HIGH, + .gpio44 = GPIO_LEVEL_HIGH, + .gpio45 = GPIO_LEVEL_HIGH, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio47 = GPIO_LEVEL_HIGH, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_HIGH, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_HIGH, + .gpio53 = GPIO_LEVEL_LOW, + .gpio54 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_HIGH, + .gpio56 = GPIO_LEVEL_LOW, + .gpio57 = GPIO_LEVEL_HIGH, + .gpio58 = GPIO_LEVEL_LOW, + .gpio59 = GPIO_LEVEL_LOW, + .gpio60 = GPIO_LEVEL_LOW, + .gpio61 = GPIO_LEVEL_LOW, + .gpio62 = GPIO_LEVEL_LOW, + .gpio63 = GPIO_LEVEL_LOW, +}; + +/* + * GPIO SET 3 includes GPIO64 to GPIO75 + */ + +const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_NATIVE, + .gpio69 = GPIO_MODE_NATIVE, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_OUTPUT, + .gpio68 = GPIO_DIR_OUTPUT, + .gpio69 = GPIO_DIR_OUTPUT, + .gpio70 = GPIO_DIR_OUTPUT, + .gpio71 = GPIO_DIR_OUTPUT, + .gpio72 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, + .gpio75 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, + .gpio65 = GPIO_LEVEL_LOW, + .gpio66 = GPIO_LEVEL_LOW, + .gpio67 = GPIO_LEVEL_LOW, + .gpio68 = GPIO_LEVEL_LOW, + .gpio69 = GPIO_LEVEL_LOW, + .gpio70 = GPIO_LEVEL_LOW, + .gpio71 = GPIO_LEVEL_LOW, + .gpio72 = GPIO_LEVEL_LOW, + .gpio73 = GPIO_LEVEL_LOW, + .gpio74 = GPIO_LEVEL_LOW, + .gpio75 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_map x201_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; + +#endif diff --git a/src/mainboard/lenovo/x201/irq_tables.c b/src/mainboard/lenovo/x201/irq_tables.c new file mode 100644 index 0000000..bf8574f --- /dev/null +++ b/src/mainboard/lenovo/x201/irq_tables.c @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2013 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * 16, + 0x00, (0x1f << 3) | 0x0, + 0x0000, + 0x8086, 0x3b07, + 0x00000000, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }, /* u8 rfu[11] */ + 0x20,/* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, { link, bitmap }, { link, bitmap }, { link, bitmap }, { link, bitmap }, slot, rfu */ + { 0x00, (0x00 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x01 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, + { 0x00, (0x02 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, + { 0x00, (0x16 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x19 << 3) | 0x0, { { 0x05, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, + { 0x00, (0x1a << 3) | 0x0, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1b << 3) | 0x0, { { 0x00, 0xdef8 }, { 0x02, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, + { 0x00, (0x1c << 3) | 0x0, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1c << 3) | 0x3, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1c << 3) | 0x4, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1d << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1e << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1f << 3) | 0x0, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1f << 3) | 0x2, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1f << 3) | 0x3, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1f << 3) | 0x6, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/lenovo/x201/mainboard.c b/src/mainboard/lenovo/x201/mainboard.c new file mode 100644 index 0000000..572542e --- /dev/null +++ b/src/mainboard/lenovo/x201/mainboard.c @@ -0,0 +1,282 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle <svens(a)stackframe.org> + * Copyright (C) 2013 Vladimir Serbinenko <phcoder(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <delay.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <ec/lenovo/pmh7/pmh7.h> +#include <ec/acpi/ec.h> +#include <ec/lenovo/h8/h8.h> +#include <northbridge/intel/nehalem/nehalem.h> +#include <southbridge/intel/bd82x6x/pch.h> + +#include <pc80/mc146818rtc.h> +#include "dock.h" +#include <arch/x86/include/arch/acpigen.h> +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE +#include <x86emu/regs.h> +#include <arch/interrupt.h> +#endif +#include <pc80/keyboard.h> +#include <cpu/x86/lapic.h> +#include <device/pci.h> +#include <smbios.h> + +static acpi_cstate_t cst_entries[] = { + {1, 1, 1000, {0x7f, 1, 2, {0}, 1, 0}}, + {2, 1, 500, {0x01, 8, 0, {0}, DEFAULT_PMBASE + LV2, 0}}, + {2, 17, 250, {0x01, 8, 0, {0}, DEFAULT_PMBASE + LV3, 0}}, +}; + +int get_cst_entries(acpi_cstate_t ** entries) +{ + *entries = cst_entries; + return ARRAY_SIZE(cst_entries); +} + +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE + +static int int15_handler(void) +{ + switch ((X86_EAX & 0xffff)) { + /* Get boot display. */ + case 0x5f35: + X86_EAX = 0x5f; +#if 0 + /* DisplayPort */ + X86_ECX = 0x4; + /* VGA */ + X86_ECX = 0x1; +#endif + /* LCD */ + X86_ECX = 0x8; + + return 1; + case 0x5f40: + X86_EAX = 0x5f; + X86_ECX = 0x2; + return 1; + default: + printk(BIOS_WARNING, "Unknown INT15 function %04x!\n", + X86_EAX & 0xffff); + return 0; + } +} +#endif + +static void rcba_config(void) +{ +#if 0 +#if 0 + u32 reg32; + + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P4IP ETH0 INTB -> PIRQC (MSI) + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQB + * D31IP_SIP SATA INTA -> PIRQA (MSI) + * D31IP_SMIP SMBUS INTC -> PIRQH + * D31IP_TTIP THRT INTB -> PIRQG + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + * + * LIGHTSENSOR -> PIRQE (Edge Triggered) + * TRACKPAD -> PIRQF (Edge Triggered) + */ + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTD << D31IP_TTIP) | (INTC << D31IP_SIP2) | + (INTD << D31IP_UNKIP) | (INTA << D31IP_SMIP) | (INTB << D31IP_SIP); + RCBA32(D30IP) = (NOINT << D30IP_PIP); + RCBA32(D29IP) = 0x40043214; //(INTA << D29IP_E1P); + RCBA32(D28IP) = 0x00014321; //(INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + // (INTB << D28IP_P4IP); + RCBA32(D27IP) = 0x00000002; //(INTA << D27IP_ZIP); + RCBA32(D26IP) = 0x30003214; //(INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); +#endif + RCBA32(0x30fc) = 0x00000000; + (void)RCBA32(0x30fc); + RCBA32(0x3100) = 0x04341200; + (void)RCBA32(0x3100); + RCBA32(0x3104) = 0x00000000; + (void)RCBA32(0x3104); + RCBA32(0x3108) = 0x40043214; + (void)RCBA32(0x3108); + RCBA32(0x310c) = 0x00014321; + (void)RCBA32(0x310c); + RCBA32(0x3110) = 0x00000002; + (void)RCBA32(0x3110); + RCBA32(0x3114) = 0x30003214; + (void)RCBA32(0x3114); + RCBA32(0x311c) = 0x00000002; + (void)RCBA32(0x311c); + RCBA32(0x3120) = 0x00000000; + (void)RCBA32(0x3120); + RCBA32(0x3124) = 0x00002321; + (void)RCBA32(0x3124); + RCBA32(0x313c) = 0x00000000; + (void)RCBA32(0x313c); + RCBA32(0x3140) = 0x00003107; + (void)RCBA32(0x3140); + RCBA32(0x3144) = 0x76543210; + (void)RCBA32(0x3144); + RCBA32(0x3148) = 0x00000010; + (void)RCBA32(0x3148); + RCBA32(0x314c) = 0x00007654; + (void)RCBA32(0x314c); + RCBA32(0x3150) = 0x00000004; + (void)RCBA32(0x3150); + RCBA32(0x3158) = 0x00000000; + (void)RCBA32(0x3158); + RCBA32(0x315c) = 0x00003210; + (void)RCBA32(0x315c); + RCBA32(0x31fc) = 0x03000000; + (void)RCBA32(0x31fc); + +#if 0 + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQA, PIRQG, PIRQH, PIRQB); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQB, PIRQC, PIRQD, PIRQA); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void)RCBA16(OIC); + /* Disable unused devices (board specific) */ + reg32 = RCBA32(FD); + reg32 |= PCH_DISABLE_ALWAYS; + RCBA32(FD) = reg32; +#endif + +#if 0 + RCBA32(0x3418) = 0x16e61fe1; + (void)RCBA32(0x3418); +#endif +#endif +} + +const char *smbios_mainboard_version(void) +{ + return "Lenovo X201"; +} + +static void mainboard_enable(device_t dev) +{ + device_t dev0; + u16 pmbase; + + printk(BIOS_SPEW, "starting SPI configure\n"); + + /* Configure SPI. */ + RCBA32(0x3800) = 0x07ff0500; + RCBA32(0x3804) = 0x3f046008; + RCBA32(0x3808) = 0x0058efc0; + RCBA32(0x384c) = 0x92000000; + RCBA32(0x3850) = 0x00000a0b; + RCBA32(0x3858) = 0x07ff0500; + RCBA32(0x385c) = 0x04ff0003; + RCBA32(0x3860) = 0x00020001; + RCBA32(0x3864) = 0x00000fff; + RCBA32(0x3874) = 0; + RCBA32(0x3890) = 0xf8400000; + RCBA32(0x3894) = 0x143b5006; + RCBA32(0x3898) = 0x05200302; + RCBA32(0x389c) = 0x0601209f; + RCBA32(0x38b0) = 0x00000004; + RCBA32(0x38b4) = 0x03040002; + RCBA32(0x38c0) = 0x00000007; + RCBA32(0x38c4) = 0x00802005; + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x3804) = 0x3f04e008; + + printk(BIOS_SPEW, "SPI configured\n"); + + pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + PMBASE) & 0xff80; + + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); + + outl(0, pmbase + SMI_EN); + + enable_lapic(); + pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_BASE, + DEFAULT_GPIOBASE | 1); + pci_write_config8(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_CNTL, + 0x10); + + rcba_config(); + +#ifdef DISABLED + ec_clr_bit(0x03, 2); + + if (inb(0x164c) & 0x08) { + ec_set_bit(0x03, 2); + ec_write(0x0c, 0x88); + } +#endif + /* If we're resuming from suspend, blink suspend LED */ + dev0 = dev_find_slot(0, PCI_DEVFN(0, 0)); + if (dev0 && pci_read_config32(dev0, SKPAD) == SKPAD_ACPI_S3_MAGIC) + ec_write(0x0c, 0xc7); + +#ifdef DISABLED + idedev = dev_find_slot(0, PCI_DEVFN(0x1f, 1)); + if (idedev && idedev->chip_info && dock_ultrabay_device_present()) { + struct southbridge_intel_i82801gx_config *config = + idedev->chip_info; + config->ide_enable_primary = 1; + /* enable Ultrabay power */ + outb(inb(0x1628) | 0x01, 0x1628); + ec_write(0x0c, 0x84); + } else { + /* disable Ultrabay power */ + outb(inb(0x1628) & ~0x01, 0x1628); + ec_write(0x0c, 0x04); + } +#endif + +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE + /* Install custom int15 handler for VGA OPROM */ + mainboard_interrupt_handlers(0x15, &int15_handler); +#endif + + /* This sneaked in here, because X201 SuperIO chip isn't really + connected to anything and hence we don't init it. + */ + pc_keyboard_init(0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lenovo/x201/mptable.c b/src/mainboard/lenovo/x201/mptable.c new file mode 100644 index 0000000..84364a0 --- /dev/null +++ b/src/mainboard/lenovo/x201/mptable.c @@ -0,0 +1,82 @@ +/* generated by MPTable, version 2.0.15*/ +/* as modified by RGM for coreboot */ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +#define INTA 0x00 +#define INTB 0x01 +#define INTC 0x02 +#define INTD 0x03 + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int isa_bus; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &isa_bus); + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, 0x2, 0x20, 0xfec00000); + + mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_ExtINT, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 0x3, 0x0, + 0x2, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x1, 0x2, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x0, 0x2, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x3, 0x2, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x4, 0x2, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x5, 0x2, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x6, 0x2, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x7, 0x2, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x8, 0x2, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x9, 0x2, 0x9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xa, 0x2, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xb, 0x2, 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xc, 0x2, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xd, 0x2, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xe, 0x2, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xf, 0x2, 0xf); + /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_lintsrc(mc, mp_ExtINT, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 0x3, 0x0, + MP_APIC_ALL, 0x0); + smp_write_lintsrc(mc, mp_NMI, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 0x3, 0x0, + MP_APIC_ALL, 0x1); + + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/lenovo/x201/romstage.c b/src/mainboard/lenovo/x201/romstage.c new file mode 100644 index 0000000..9bf0254 --- /dev/null +++ b/src/mainboard/lenovo/x201/romstage.c @@ -0,0 +1,413 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle <svens(a)stackframe.org> + * Copyright (C) 2013 Vladimir Serbinenko <phcoder(a)gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// __PRE_RAM__ means: use "unsigned" for device, not a struct. + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <lib.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <ec/acpi/ec.h> +#include <delay.h> +#include <timestamp.h> + +#include "gpio.h" +#include "dock.h" +#include "arch/early_variables.h" +#include "southbridge/intel/ibexpeak/pch.h" +#include "southbridge/intel/bd82x6x/gpio.h" +#include "northbridge/intel/nehalem/nehalem.h" + +#include "northbridge/intel/nehalem/raminit.h" +#include "southbridge/intel/bd82x6x/pch.h" +#include "southbridge/intel/bd82x6x/gpio.h" +#include "southbridge/intel/bd82x6x/me.h" + +static void pch_enable_lpc(void) +{ + /* Parrot EC Decode Range Port60/64, Port62/66 */ + /* Enable EC, PS/2 Keyboard/Mouse */ + pci_write_config16(PCH_LPC_DEV, LPC_EN, + CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | + COMA_LPC_EN); + + pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x7c1601); + pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0xc15e1); + pci_write_config32(PCH_LPC_DEV, LPC_GEN3_DEC, 0x1c1681); + pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, (0x68 & ~3) | 0x00040001); + + pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); + + pci_write_config32(PCH_LPC_DEV, 0xd0, 0x0); + pci_write_config32(PCH_LPC_DEV, 0xdc, 0x0); + + pci_write_config8(PCH_LPC_DEV, GEN_PMCON_3, + (pci_read_config8(PCH_LPC_DEV, GEN_PMCON_3) & ~2) | 1); + + pci_write_config32(PCH_LPC_DEV, ETR3, + pci_read_config32(PCH_LPC_DEV, ETR3) & ~ETR3_CF9GR); +} + +static void rcba_config(void) +{ + static const u32 rcba_dump3[] = { + /* 30fc */ 0x00000000, + /* 3100 */ 0x04341200, 0x00000000, 0x40043214, 0x00014321, + /* 3110 */ 0x00000002, 0x30003214, 0x00000001, 0x00000002, + /* 3120 */ 0x00000000, 0x00002321, 0x00000000, 0x00000000, + /* 3130 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3140 */ 0x00003107, 0x76543210, 0x00000010, 0x00007654, + /* 3150 */ 0x00000004, 0x00000000, 0x00000000, 0x00003210, + /* 3160 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3170 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3180 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3190 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31f0 */ 0x00000000, 0x00000000, 0x00000000, 0x03000000, + /* 3200 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3210 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3220 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3230 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3240 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3250 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3260 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3270 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3280 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3290 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3300 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3310 */ 0x02060100, 0x0000000f, 0x01020000, 0x80000000, + /* 3320 */ 0x00000000, 0x04000000, 0x00000000, 0x00000000, + /* 3330 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3340 */ 0x000fffff, 0x00000000, 0x00000000, 0x00000000, + /* 3350 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3360 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3370 */ 0x00000000, 0x00000000, 0x7f8fdfff, 0x00000000, + /* 3380 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3390 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 33a0 */ 0x00003900, 0x00000000, 0x00000000, 0x00000000, + /* 33b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 33c0 */ 0x00010000, 0x00000000, 0x00000000, 0x0001004b, + /* 33d0 */ 0x06000008, 0x00010000, 0x00000000, 0x00000000, + /* 33e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 33f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3400 */ 0x0000001c, 0x00000080, 0x00000000, 0x00000000, + /* 3410 */ 0x00000c61, 0x00000000, 0x16e61fe1, 0xbf4f001f, + /* 3420 */ 0x00000000, 0x00060010, 0x0000001d, 0x00000000, + /* 3430 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3440 */ 0xdeaddeed, 0x00000000, 0x00000000, 0x00000000, + /* 3450 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3460 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3470 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3480 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3490 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3500 */ 0x20000557, 0x2000055f, 0x2000074b, 0x2000074b, + /* 3510 */ 0x20000557, 0x2000014b, 0x2000074b, 0x2000074b, + /* 3520 */ 0x2000074b, 0x2000074b, 0x2000055f, 0x2000055f, + /* 3530 */ 0x20000557, 0x2000055f, 0x00000000, 0x00000000, + /* 3540 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3550 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3560 */ 0x00000001, 0x000026a3, 0x00040002, 0x01000052, + /* 3570 */ 0x02000772, 0x16000f8f, 0x1800ff4f, 0x0001d630, + /* 3580 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3590 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35a0 */ 0xfc000201, 0x3c000201, 0x00000000, 0x00000000, + /* 35b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3600 */ 0x0a001f00, 0x00000000, 0x00000000, 0x00000001, + /* 3610 */ 0x00010000, 0x00000000, 0x00000000, 0x00000000, + /* 3600 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3610 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3620 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3630 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3640 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3650 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3660 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3670 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3680 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3690 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36b0 */ 0x00000000, 0x089c0018, 0x00000000, 0x00000000, + /* 36c0 */ 0x11111111, 0x00000000, 0x00000000, 0x00000000, + /* 36d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3710 */ 0x00000000, 0x4e564d49, 0x00000000, 0x00000000, + }; + unsigned i; + for (i = 0; i < sizeof(rcba_dump3) / 4; i++) { + RCBA32(4 * i + 0x30fc) = rcba_dump3[i]; + (void)RCBA32(4 * i + 0x30fc); + } +} + +#include <cbmem.h> + +static void +setup_smbus_5c (void) +{ + u16 t3; + + if (MCHBAR8(0x2ca8) == 0) { + t3 = inw(DEFAULT_GPIOBASE | 0x38); + outw(t3 & ~0x400, DEFAULT_GPIOBASE | 0x38); + smbus_read_byte(0x5c, 0x06); + smbus_write_byte(0x5c, 0x06, 0x8f); + + smbus_read_byte(0x5c, 0x07); + smbus_write_byte(0x5c, 0x07, 0x8f); + + outw(t3 | 0x400, DEFAULT_GPIOBASE | 0x38); + } + + t3 = inw(DEFAULT_GPIOBASE | 0x38); + outw(t3 & ~0x400, DEFAULT_GPIOBASE | 0x38); + + smbus_read_byte(0x57, 0x55); + outw(t3 | 0x400, DEFAULT_GPIOBASE | 0x38); +} + +#if CONFIG_COLLECT_TIMESTAMPS +tsc_t before_spd CAR_GLOBAL, after_spd CAR_GLOBAL, before_training CAR_GLOBAL, + after_training CAR_GLOBAL; +#endif + +static inline void write_acpi32(u32 addr, u32 val) +{ + outl(val, DEFAULT_PMBASE | addr); +} + +static inline void write_acpi16(u32 addr, u16 val) +{ + outw(val, DEFAULT_PMBASE | addr); +} + +static inline u32 read_acpi32(u32 addr) +{ + return inl(DEFAULT_PMBASE | addr); +} + +static inline u16 read_acpi16(u32 addr) +{ + return inw(DEFAULT_PMBASE | addr); +} + +void main(unsigned long bist) +{ + u32 reg32; + int s3resume = 0; +#if CONFIG_COLLECT_TIMESTAMPS + tsc_t start_romstage_time; + tsc_t before_dram_time; + tsc_t after_dram_time; + tsc_t base_time = rdtsc(); +#endif + +#if CONFIG_COLLECT_TIMESTAMPS + start_romstage_time = base_time; +#endif + + if (bist == 0) + enable_lapic(); + + /* Force PCIRST# */ + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR); + pci_write_config16(PCI_DEV(0, 0, 0), BCTRL, SBR); + udelay(200 * 1000); + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0); + pci_write_config16(PCI_DEV(0, 0, 0), BCTRL, 0); + + /* Enable USB Power. */ + ec_set_bit(0x3b, 4); + + pch_enable_lpc(); + + /* Enable GPIOs */ + pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1); + pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); + + setup_pch_gpios(&x201_gpio_map); + + nehalem_early_initialization(NEHALEM_MOBILE); + + /* This should probably go away. Until now it is required + * and mainboard specific + */ + rcba_config(); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + /* Read PM1_CNT */ + reg32 = inl(DEFAULT_PMBASE + 0x04); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); + if (((reg32 >> 10) & 7) == 5) { + u8 reg8; + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); + printk(BIOS_DEBUG, "a2: %02x\n", reg8); + if (!(reg8 & 0x20)) { + outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); + printk(BIOS_DEBUG, "Bad resume from S3 detected.\n"); + } else { +#if CONFIG_HAVE_ACPI_RESUME + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + s3resume = 1; +#else + printk(BIOS_DEBUG, + "Resume from S3 detected, but disabled.\n"); +#endif + } + } + + /* Enable SMBUS. */ + enable_smbus(); + + setup_smbus_5c (); + + outb((inb(DEFAULT_GPIOBASE | 0x3a) & ~0x2) | 0x20, + DEFAULT_GPIOBASE | 0x3a); + outb(0x50, 0x15ec); + outb(inb(0x15ee) & 0x70, 0x15ee); + + write_acpi16(0x2, 0x0); + write_acpi32(0x28, 0x0); + write_acpi32(0x2c, 0x0); + if (!s3resume) { + read_acpi32(0x4); + read_acpi32(0x20); + read_acpi32(0x34); + write_acpi16(0x0, 0x900); + write_acpi32(0x20, 0xffff7ffe); + write_acpi32(0x34, 0x56974); + pci_write_config8(PCH_LPC_DEV, GEN_PMCON_3, + pci_read_config8(PCH_LPC_DEV, GEN_PMCON_3) | 2); + } + +#if CONFIG_COLLECT_TIMESTAMPS + before_dram_time = rdtsc(); +#endif + + raminit(s3resume); +#if CONFIG_COLLECT_TIMESTAMPS + after_dram_time = rdtsc(); +#endif + + intel_early_me_status(); + + if (s3resume) { + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + reg32 = inl(DEFAULT_PMBASE + 0x04); + outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); + } +#if CONFIG_HAVE_ACPI_RESUME + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + if (s3resume && cbmem_reinit()) { + void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); +#if 0 + s3_checksum(); +#endif + /* for (i = 0; i < 65536; i++) + if (read8 (i) != read8 (i + 0x100000)) + printk (BIOS_ERR, "Corruption at %x: %x vs %x\n", i, + read8 (i), read8 (i + 0x100000)); */ + + /* copy 1MB - 64K to high tables ram_base to prevent memory corruption + * through stage 2. We could keep stuff like stack and heap in high tables + * memory completely, but that's a wonderful clean up task for another + * day. + */ + if (resume_backup_memory) + memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, + HIGH_MEMORY_SAVE); +#if 0 + printk(BIOS_ERR, "move: %x, %x, %x\n", + (unsigned)resume_backup_memory, (unsigned)CONFIG_RAMBASE, + (unsigned)HIGH_MEMORY_SAVE); + + s = 0; + for (j = 0; j < 0x100000; j += 4) + s += ((u32 *) resume_backup_memory)[j / 4]; + if (((u8 *) (72 << 20))[1] != s % 255) { + printk(BIOS_ERR, "MiB 1 (copy) corrupted %x vs %x\n", + ((u8 *) (72 << 20))[1], s % 255); + } else + printk(BIOS_ERR, "MiB 1 (copy) ok %x == %x\n", + ((u8 *) (72 << 20))[1], s % 255); +#endif + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d); + } else if (s3resume) { + printk(BIOS_ERR, "Failed S3 resume.\n"); + ram_check(0x100000, 0x200000); + + /* Failed S3 resume, reset to come up cleanly */ + outb(0xe, 0xcf9); + hlt(); + } else { + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe); + quick_ram_check(); + } +#endif + +#if CONFIG_COLLECT_TIMESTAMPS + timestamp_init(base_time); + timestamp_add(TS_START_ROMSTAGE, start_romstage_time); + timestamp_add(TS_BEFORE_INITRAM, before_dram_time); + timestamp_add(101, before_spd); + timestamp_add(102, after_spd); + timestamp_add(103, before_training); + timestamp_add(104, after_training); + timestamp_add(TS_AFTER_INITRAM, after_dram_time); + timestamp_add_now(TS_END_ROMSTAGE); +#endif +} diff --git a/src/mainboard/lenovo/x201/smi.h b/src/mainboard/lenovo/x201/smi.h new file mode 100644 index 0000000..c5f48a1 --- /dev/null +++ b/src/mainboard/lenovo/x201/smi.h @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle <svens(a)stackframe.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MAINBOARD_LENOVO_X60_SMI_H +#define MAINBOARD_LENOVO_X60_SMI_H + +#define SMI_DOCK_CONNECT 0x01 +#define SMI_DOCK_DISCONNECT 0x02 +#define SMI_SAVE_CMOS 0x03 + +#endif diff --git a/src/mainboard/lenovo/x201/smihandler.c b/src/mainboard/lenovo/x201/smihandler.c new file mode 100644 index 0000000..edc93f5 --- /dev/null +++ b/src/mainboard/lenovo/x201/smihandler.c @@ -0,0 +1,210 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include "southbridge/intel/i82801gx/nvs.h" +#include "southbridge/intel/i82801gx/i82801gx.h" +#include <ec/acpi/ec.h> +#include <pc80/mc146818rtc.h> +#include <ec/lenovo/h8/h8.h> +#include <delay.h> +#include "dock.h" +#include "smi.h" + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +static void mainboard_smm_init(void) +{ + printk(BIOS_DEBUG, "initializing SMI\n"); + /* Enable 0x1600/0x1600 register pair */ + ec_set_bit(0x00, 0x05); +} + +static void mainboard_smi_save_cmos(void) +{ + u8 val; + u8 tmp70, tmp72; + + tmp70 = inb(0x70); + tmp72 = inb(0x72); + + val = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4); + set_option("tft_brightness", &val); + val = ec_read(H8_VOLUME_CONTROL); + set_option("volume", &val); + + outb(tmp70, 0x70); + outb(tmp72, 0x72); +} + +int mainboard_io_trap_handler(int smif) +{ + static int smm_initialized; + + if (!smm_initialized) { + mainboard_smm_init(); + smm_initialized = 1; + } + + switch (smif) { + case SMI_DOCK_CONNECT: + ec_clr_bit(0x03, 2); + udelay(250000); + if (!dock_connect()) { + ec_set_bit(0x03, 2); + /* set dock LED to indicate status */ + ec_write(0x0c, 0x09); + ec_write(0x0c, 0x88); + } else { + /* blink dock LED to indicate failure */ + ec_write(0x0c, 0x08); + ec_write(0x0c, 0xc9); + } + break; + + case SMI_DOCK_DISCONNECT: + ec_clr_bit(0x03, 2); + dock_disconnect(); + break; + + case SMI_SAVE_CMOS: + mainboard_smi_save_cmos(); + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 1 + * On failure, the IO Trap Handler returns a value != 1 */ + return 1; +} + +static void mainboard_smi_brightness_up(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); +} + +static void mainboard_smi_brightness_down(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, + (value - 0x10) & 0xf0); +} + +static void mainboard_smi_handle_ec_sci(void) +{ + u8 status = inb(EC_SC); + u8 event; + + if (!(status & EC_SCI_EVT)) + return; + + event = ec_query(); + printk(BIOS_DEBUG, "EC event %02x\n", event); + + switch (event) { + /* brightness up */ + case 0x14: + mainboard_smi_brightness_up(); + mainboard_smi_save_cmos(); + break; + /* brightness down */ + case 0x15: + mainboard_smi_brightness_down(); + mainboard_smi_save_cmos(); + break; + /* Fn-F9 key */ + case 0x18: + /* Power loss */ + case 0x27: + /* Undock Key */ + case 0x50: + mainboard_io_trap_handler(SMI_DOCK_DISCONNECT); + break; + /* Dock Event */ + case 0x37: + case 0x58: + mainboard_io_trap_handler(SMI_DOCK_CONNECT); + break; + default: + break; + } +} + +void mainboard_smi_gpi(u16 gpi) +{ + if (gpi & (1 << 12)) + mainboard_smi_handle_ec_sci(); +} + +int mainboard_smi_apmc(u8 data) +{ + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + u8 tmp; + + printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, + data); + + if (!pmbase) + return 0; + + switch (data) { + case APM_CNT_ACPI_ENABLE: + /* use 0x1600/0x1604 to prevent races with userspace */ + ec_set_ports(0x1604, 0x1600); + /* route H8SCI to SCI */ + outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x02; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + case APM_CNT_ACPI_DISABLE: + /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't + provide a EC query function */ + ec_set_ports(0x66, 0x62); + /* route H8SCI# to SMI */ + outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, + pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + default: + break; + } + return 0; +}

1 0

← Newer
1
...
25
26
27
28
29
30
31
...
86
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

coreboot-gerrit November 2013