[S] Change in coreboot[master]: mb/siemens/mc_ehl4: Adjust USB settings

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/74651 )

(

3 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.
 )Change subject: mb/siemens/mc_ehl4: Adjust USB settings
......................................................................

mb/siemens/mc_ehl4: Adjust USB settings

Correct the USB settings, suitable for this mainboard.

Change-Id: I943eb891e2f2d967acfd441c085063dbad49e993
Signed-off-by: Mario Scheithauer 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74651
Reviewed-by: Jan Samek 
Reviewed-by: Paul Menzel 
Reviewed-by: Werner Zeh 
Tested-by: build bot (Jenkins) 
---
M src/mainboard/siemens/mc_ehl/variants/mc_ehl4/devicetree.cb
1 file changed, 21 insertions(+), 4 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Paul Menzel: Looks good to me, but someone else must approve
  Werner Zeh: Looks good to me, approved
  Jan Samek: Looks good to me, but someone else must approve

diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/devicetree.cb b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/devicetree.cb
index 52da98e..5cc496f 100644
--- a/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/devicetree.cb
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/devicetree.cb
@@ -20,9 +20,9 @@
    }"

# USB related UPDs
-	register "usb2_ports[0]" = "USB2_PORT_SHORT(OC_SKIP)"	# USB3/2 Type A port 1
-	register "usb2_ports[1]" = "USB2_PORT_SHORT(OC_SKIP)"	# USB3/2 Type A Port 2
-	register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)"	# Onboard USB
+	register "usb2_ports[0]" = "USB2_PORT_SHORT(OC_SKIP)"	# X125
+	register "usb2_ports[1]" = "USB2_PORT_SHORT(OC_SKIP)"	# X135
+	register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)"	# internal USB-OC
    register "usb2_ports[3]" = "USB2_PORT_EMPTY"		# Port is unused
    register "usb2_ports[4]" = "USB2_PORT_EMPTY"		# Port is unused
    register "usb2_ports[5]" = "USB2_PORT_EMPTY"		# Port is unused
@@ -32,7 +32,7 @@
    register "usb2_ports[9]" = "USB2_PORT_EMPTY"		# Port is unused

register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# USB3/2 Type A port1
-	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# USB3/2 Type A port2
+	register "usb3_ports[1]" = "USB3_PORT_EMPTY"		# Port is not used
    register "usb3_ports[2]" = "USB3_PORT_EMPTY"		# Port is not used
    register "usb3_ports[3]" = "USB3_PORT_EMPTY"		# Port is not used