Change in coreboot[master]: libpayload: Use interrupt transfers for USB hubs

[Nico Huber (Code Review)]

Hello Patrick Rudolph, Julius Werner, Paul Menzel, build bot (Jenkins),

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/18499

to look at the new patch set (#3).

Change subject: libpayload: Use interrupt transfers for USB hubs
......................................................................

libpayload: Use interrupt transfers for USB hubs

In interactive payloads, the USB stack's poll procedure is implicitly
called from the UI loop. Since all USB control transfers are handled
synchronously, polling hubs with these slows the UI significantly down.

So switch to interrupt transfers that are done asynchronously and only
perform control transfers when the hub reported a status change.

Change-Id: I5af02d63e4b8e1451b160b77f3611b93658a7a48
Signed-off-by: Nico Huber 
---
M payloads/libpayload/drivers/usb/usbhub.c
1 file changed, 137 insertions(+), 9 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/99/18499/3