Change in coreboot[master]: mainboard/google/puff: Add extra USB configuration

[Edward O'Callaghan (Code Review)]

Edward O'Callaghan has submitted this change. ( https://review.coreboot.org/c/coreboot/+/37853 )

Change subject: mainboard/google/puff: Add extra USB configuration
......................................................................

mainboard/google/puff: Add extra USB configuration

Adding extra USB configuration since Puff has different USB ports compared to hatch

BRANCH=none
BUG=b:146437609
TEST=none

Change-Id: I42ef6b6b718274953711c84ebe90971f108501fa
Signed-off-by: Kangheui Won 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37853
Tested-by: build bot (Jenkins) 
Reviewed-by: Edward O'Callaghan 
---
M src/mainboard/google/hatch/variants/puff/overridetree.cb
1 file changed, 34 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Edward O'Callaghan: Looks good to me, approved

diff --git a/src/mainboard/google/hatch/variants/puff/overridetree.cb b/src/mainboard/google/hatch/variants/puff/overridetree.cb
index d362b22..a24d7fc 100644
--- a/src/mainboard/google/hatch/variants/puff/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/puff/overridetree.cb
@@ -15,6 +15,11 @@
    	[PchSerialIoIndexUART2] = PchSerialIoDisabled,
    }"

+  # USB configuration
+	register "usb2_ports[4]" = "USB2_PORT_SHORT(OC_SKIP)"
+	register "usb2_ports[6]" = "USB2_PORT_EMPTY"
+	register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)"
+
    # Enable eMMC HS400
    register "ScsEmmcHs400Enabled" = "1"

@@ -114,6 +119,35 @@
    register "sdcard_cd_gpio" = "vSD3_CD_B"

device domain 0 on
+		device pci 14.0 on
+			chip drivers/usb/acpi
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						register "desc" = ""Type-A Port 4""
+						register "type" = "UPC_TYPE_A"
+						device usb 2.4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Type-A Port 0""
+						register "type" = "UPC_TYPE_A"
+						device usb 2.5 on end
+					end
+					chip drivers/usb/acpi
+						device usb 2.6 off end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Type-A Port 0""
+						register "type" = "UPC_TYPE_USB3_A"
+						device usb 3.4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""Type-A Port 4""
+						register "type" = "UPC_TYPE_USB3_A"
+						device usb 3.5 on end
+					end
+				end
+			end
+		end # USB xHCI
    	device pci 15.0 off
    		# RFU - Reserved for Future Use.
    	end # I2C #0