Change in coreboot[master]: mb/google/dedede: Update DPTF setting

[Teddy Shih (Code Review)]

Attention is currently required from: Henry Sun, Super Ni, Aseda Aboagye, Simon Yang, Ivan Chen, Teddy Shih, Karthik Ramasubramanian.
Hello build bot (Jenkins), Henry Sun, Super Ni, Paul Menzel, Aseda Aboagye, Simon Yang, Ivan Chen, Karthik Ramasubramanian,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/62729

to look at the new patch set (#3).

Change subject: mb/google/dedede: Update DPTF setting
......................................................................

mb/google/dedede: Update DPTF setting

Update PL1, PL2, and temperature sensor values from thermal team,
as well as, we remove unused temperature sensors according to
baseboard/devicetree.cb and mainboard schematic. After we check
DTT setting, the thermal and performance test pass.

BRANCH=dedede
BUG=b:204229229
TEST=on beadrix, run following commands:
localhost /tmp # cat /sys/class/thermal/thermal_zone*/type
x86_pkg_temp
INT3400 Thermal
TSR0
TSR1
TCPU
localhost /tmp # cat /sys/class/thermal/thermal_zone*/temp
45000
20000
32800
32800
39000

Signed-off-by: Teddy Shih 
Change-Id: Ibc59c4aa431f600158e744f5bbdc6d59a07a1ef3
---
M src/mainboard/google/dedede/variants/beadrix/overridetree.cb
1 file changed, 40 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/29/62729/3