Mike Banon has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/64873 )
Change subject: csb_patcher.sh: gets,checks,installs the coreboot and SeaBIOS patches ......................................................................
csb_patcher.sh: gets,checks,installs the coreboot and SeaBIOS patches
Conveniently and securely gets, checks SHA256 and installs some of my patches from this page - https://review.coreboot.org/q/status:open+banon - and also gets a collection of useful floppy-based operating systems.
Sometimes it takes quite a long time to get a patch merged, while the people might need it today! - and this script could be really helpful.
It asks a [Y/N] question for every addition, and since there are some "universal" patches as well as great floppies, you may still want to run this script - even if your board is not Lenovo G505S or not AMD.
Please share your feedback/suggestions and tell about other useful patches, preferably the "universal" ones - i.e. SeaBIOS. Currently included:
1) "board-specific": Lenovo G505S discrete GPU support, custom SeaBIOS options, example configs for G505S / AM1I-A / A88XM-E and known good AtomBIOS ROMs, and also good IRQ routing for AMD Lenovo G505S, ASUS A88XM-E and AM1I-A boards.
2) "universal": SeaBIOS patches: advanced_bootmenu, multiple_floppies, smbios_mptable_768; and also a floppies collection: KolibriOS, FreeDOS, MichalOS, Snowdrop, Fiwix, Memtest, Tatos, Plop, FloppyBird.
Run ./csb_patcher.sh help or ./csb_patcher.sh usage for more information.
Signed-off-by: Mike Banon mikebdp2@gmail.com Change-Id: Ia392bad869a82707380d3a1e3c51b3e15f4f02f2 --- A csb_patcher.sh 1 file changed, 927 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/73/64873/1
diff --git a/csb_patcher.sh b/csb_patcher.sh new file mode 100755 index 0000000..ffc3b86 --- /dev/null +++ b/csb_patcher.sh @@ -0,0 +1,927 @@ +#!/bin/sh +# +# csb_patcher.sh: coreboot and SeaBIOS patcher script, 01 Jun 2022. +# +# Conveniently and securely gets, checks SHA256 and installs some of my +# patches from this page - https://review.coreboot.org/q/status:open+banon +# and also gets a collection of useful floppy-based operating systems. +# Please send your feedback to Mike Banon mikebdp2@gmail.com. +# +# Released under the terms of GNU GPL v3 by Free Software Foundation. +# + +# Keys +enter=$( printf '\015' ) +ctrl_c=$( printf '\003' ) +ctrl_x=$( printf '\030' ) +ctrl_z=$( printf '\032' ) + +# Formatting +bold="\e[1m" +bred="\e[1;31m" +bgreen="\e[1;32m" +byellow="\e[1;33m" +bend="\e[0m" + +# Asks a question '$1' and waits for Y/N user input, printing a decision - with '$2' message if Y. +yesno () { + printf "$1 [Y/N] " + yesno_old_stty_cfg=$( stty -g ) + stty raw -echo + while true ; do + yesno_answer=$( head -c 1 ) + case "$yesno_answer" in + *"$ctrl_c"*|"$ctrl_x"*|"$ctrl_z"*) + stty "$yesno_old_stty_cfg" + printf "${bred}TERMINATED${bend}\n" + exit 1 + ;; + *"y"*|"Y"*) + stty "$yesno_old_stty_cfg" + printf "${bgreen}YES${bend}$2\n" + return 0 + ;; + *"n"*|"N"*) + stty "$yesno_old_stty_cfg" + printf "${byellow}NO${bend}\n" + return 1 + ;; + esac + done +} + +# Waits until a user presses Enter. +encontinue () { + printf "\npress [ENTER] to continue... " + encontinue_old_stty_cfg=$( stty -g ) + stty raw -echo + while true ; do + encontinue_answer=$( head -c 1 ) + case "$encontinue_answer" in + *"$ctrl_c"*|"$ctrl_x"*|"$ctrl_z"*) + stty "$encontinue_old_stty_cfg" + printf "${bred}TERMINATED${bend}\n" + exit 1 + ;; + *"$enter"*) + stty "$encontinue_old_stty_cfg" + printf "\n" + return 0 + ;; + esac + done +} + +# Checks if a command '$1' exists. +command_exists() { + if [ ! -x "$( command -v $1 )" ] ; then + printf "\n${bred}ERROR${bend}: command ${bold}$1${bend} is not found !\n" + encontinue + return 1 + else + return 0 + fi +} + +# Checks if a file '$1' exists. +file_exists () { + if [ ! -f "$1" ] ; then + printf "\n${byellow}WARNING${bend}: file ${bold}$1${bend} is not found !\n" + encontinue + return 1 + else + return 0 + fi +} + +# Force removes a file '$2' and then copies a file '$1' to '$2'. +copier () { + if file_exists "$1" ; then + rm -f "$2" + cp "$1" "$2" + return 0 + else + return 1 + fi +} + +# Force removes a file '$2' and then moves a file '$1' to '$2'. +mover () { + if file_exists "$1" ; then + rm -f "$2" + mv "$1" "$2" + return 0 + else + return 1 + fi +} + +# Checks if line '$1' contains the text '$2'. +checker () { + case "$1" in + *"$2"*) + return 0 + ;; + *) + return 1 + ;; + esac +} + +# Prints the lines of a file '$2' which contain the text '$1'. +grepper () { + if file_exists "$2" ; then + while IFS= read -r grepper_line + do + case "$grepper_line" in + *"$1"*) + printf '%s\n' "$grepper_line" + ;; + esac + done < "$2" + return 0 + else + return 1 + fi +} + +# Checks if a file '$2' contains the text '$1'. +grepcheck () { + if file_exists "$2" ; then + while IFS= read -r grepcheck_line + do + case "$grepcheck_line" in + *"$1"*) + return 0 + ;; + esac + done < "$2" + return 1 + else + return 1 + fi +} + +# Replaces the lines containing the text '$2' of a file '$1' with a line '$3'. +sedder () { + if file_exists "$1" ; then + csb_sedder_tmp="./.csb_sedder" + rm -f "$csb_sedder_tmp" + while IFS= read -r sedder_line + do + case "$sedder_line" in + *"$2"*) + if [ ! -z "$3" ] ; then + printf '%s\n' "$3" >> "$csb_sedder_tmp" + fi + ;; + *) + printf '%s\n' "$sedder_line" >> "$csb_sedder_tmp" + ;; + esac + done < "$1" + mover "$csb_sedder_tmp" "$1" + return 0 + else + return 1 + fi +} + +# Downloads a file '$1' from a link '$2' using the options '$3' and checks if this was successful. +wgetter () { + rm -f "$1" + if [ -z "$3" ] ; then + wget "$2" + else + wget "$3" "$2" + fi + if [ -f "$1" ] ; then + wgetter_file_size=$(($( wc -c < "$1" ))) + if [ "$wgetter_file_size" -eq "0" ] ; then + rm -f "$1" + fi + fi + if [ ! -f "$1" ] ; then + printf "\n${byellow}WARNING${bend}: can't download a ${bold}$1${bend} file !" + printf "\n Please check your Internet connection and try again.\n" + encontinue + return 1 + else + sleep 1 + return 0 + fi +} + +# Unzips the archive '$1', optional '$2' for -j path inside the archive, and then force removes it. +unzipper () { + if file_exists "$1" ; then + if [ -z "$2" ] ; then + unzip "$1" + else + unzip -j "$1" "$2" + fi + rm -f "$1" + return 0 + else + return 1 + fi +} + +# Expands a file '$1' with zeroes using a dd to '$2' size - e.g. to a standard floppy size 1474560. +expander () { + if file_exists "$1" && [ ! -z "$2" ] ; then + expander_file_size=$(($( wc -c < "$1" ))) + if [ "$expander_file_size" -lt "$2" ] ; then + dd if=/dev/zero of=$1 bs=1 count=1 seek="$(( $2 - 1 ))" conv=notrunc iflag=nocache + fi + return 0 + else + return 1 + fi +} + +# Compares sha256sum of '$1.img' floppy image with '$2' and creates a hidden '.$1' file if matches. +floppy_verifier () { + rm -f "./.$1" + cd "./../" + if [ ! -z "$2" ] ; then + if file_exists "./floppies/$1.img" ; then + floppy_verifier_sha256sum_correct="$2 ./floppies/$1.img" + floppy_verifier_sha256sum_my=$( sha256sum "./floppies/$1.img" ) + printf "\n=== sha256sum should be:\n${bold}$floppy_verifier_sha256sum_correct${bend}\n" + if [ "$floppy_verifier_sha256sum_my" = "$floppy_verifier_sha256sum_correct" ] ; then + printf "^^^ this is correct, ./floppies/${bold}$1.img${bend} is verified and could be added.\n\n" + cd "./floppies/" + touch "./.$1" + return 0 + else + printf "${bold}^^^ ! MISMATCH for ./floppies/$1.img ! Check sha256sum manually: sha256sum ./floppies/$1.img${bend}\n" + encontinue + cd "./floppies/" + return 1 + fi + else + printf "\n${byellow}WARNING${bend}: cannot find ./floppies/${bold}$1.img${bend} !\n" + printf "\n Please re-download a set of floppies.\n" + encontinue + return 1 + fi + else + printf "\n${byellow}WARNING${bend}: ./floppies/${bold}$1.img${bend} - is a rolling release, its' SHA256 checksum" + printf "\n is changing constantly and not provided by $1 project, so not checked.\n" + encontinue + cd "./floppies/" + touch "./.$1" + return 0 + fi +} + +# Downloads a collection of floppies, for the purpose of adding them later to a coreboot ROM image. +floppy_mass_downloader () { + printf "\n" + if [ ! -d "./floppies/" ]; then + mkdir "./floppies/" + fi + cd "./floppies/" + # KOLIBRI + if command_exists "7za" ; then + if wgetter "./latest-img.7z" "https://builds.kolibrios.org/eng/latest-img.7z" ; then + rm -f "./kolibri.img" + 7za x "./latest-img.7z" + rm -f "./INSTALL.TXT" + rm -f "./latest-img.7z" + floppy_verifier "kolibri" "" # IS A ROLLING RELEASE, NO SHA256 VERIFICATION + fi + else + printf "\n${byellow}WARNING${bend}: cannot get ./floppies/${bold}kolibri.img${bend} without ${bold}7za${bend}\n" + encontinue + fi + # FREEDOS + printf "\n${byellow}WARNING${bend}: getting ./floppies/${bold}freedos.img${bend} could take a couple of minutes...\n\n" + if wgetter "./FD13-FloppyEdition.zip" "https://www.ibiblio.org/pub/micro/pc-stuff/freedos/files/distributions/1.3/o..." ; then + unzipper "./FD13-FloppyEdition.zip" "144m/x86BOOT.img" + mover "./x86BOOT.img" "./freedos.img" + floppy_verifier "freedos" "3f7834ea4575ba05d106e4b8f59f886da7bfb1979ee386be2a2deba8df518925" + fi + # MICHALOS + if wgetter "./michalos.img" "https://github.com/mikebdp2/MichalOS/raw/master/build/images/michalos.flp" "--output-document=michalos.img" ; then + floppy_verifier "michalos" "9e063275a4b098a4af15fffbf6d0a8ae83d11470cb170809a38512eedc035843" + fi + # SNOWDROP + if wgetter "./snowdrop.img" "http://sebastianmihai.com/downloads/snowdrop/snowdrop.img" ; then + floppy_verifier "snowdrop" "" # IS A ROLLING RELEASE, NO SHA256 VERIFICATION + fi + # FIWIX + if wgetter "./fiwix.img" "https://www.fiwix.org/FiwixOS-3.1-initrd-i386.img" "--output-document=fiwix.img" ; then + floppy_verifier "fiwix" "c4f919adbb95bd145238e7543fe78f2703d87ee7d79e9b57f05b09a64aaa814f" + fi + # MEMTEST86+ 5.01 - COREBOOT'S FORK + if wgetter "./memtest.img" "https://github.com/mikebdp2/memtest86plus/raw/master/memtest.img" ; then + floppy_verifier "memtest" "d320f0ae56a1c65737e7bc207db22088da982f57236340abc9368860df26ea87" + fi + # TATOS + if wgetter "./tatos.img" "https://github.com/tatimmer/tatOS/raw/master/tatOS.img" "--output-document=tatos.img" ; then + expander "./tatos.img" "1474560" + floppy_verifier "tatos" "2c66f884498a4fe7b469bc213aebfccd84a09fd7ace1b3b4b3e747e2392c35d1" + fi + # PLOP + if wgetter "./plpbt-5.0.15.zip" "https://download.plop.at/files/bootmngr/plpbt-5.0.15.zip" ; then + unzipper "./plpbt-5.0.15.zip" "plpbt-5.0.15/plpbt.img" + mover "./plpbt.img" "./plop.img" + floppy_verifier "plop" "f170759966ec4efe60c8531158344a234d7543c8de81e54c8c1bb9d2d69eaf27" + fi + # FLOPPYBIRD - IMPROVED FORK + if wgetter "./floppybird.img" "https://github.com/mikebdp2/floppybird/raw/master/build/img/floppybird.img" ; then + floppy_verifier "floppybird" "249f77da69ba5d3295ed0c9180e4ffc646fb24f545630448fd55d5de2aec1455" + fi + # Some floppies have the weird permissions after their extraction + floppy_mass_downloader_floppies=$( find . -name "*.img" ) + if [ ! -z "$floppy_mass_downloader_floppies" ] ; then + chmod 755 "./"*".img" + fi + # Return back to ./coreboot/ + cd "./../" + return 0 +} + +# Adds a './pci1002,$1.rom' to coreboot '$3' ROM using '$2' cbfstool, printing '$4'/'$5'/'$6' info. +atombios_adder () { + if file_exists "$2" && file_exists "$3" ; then + if [ -f "./pci1002,$1.rom" ] ; then + atombios_adder_cbfs=$( "$2" "$3" print ) + if checker "$atombios_adder_cbfs" "pci1002,$1.rom" ; then + printf "\n${bgreen}NOTE${bend}: ./${bold}pci1002,$1.rom${bend} for ${bold}$5 : $6${bend} is already at your $3.\n" + else + if yesno "\nAdd a ./${bold}pci1002,$1.rom${bend} for ${bold}$5 : $6${bend} to your $3 now? ${bold}~$4${bend}" ", adding..." ; then + "$2" "$3" add -f "./pci1002,$1.rom" -n "pci1002,$1.rom" -t optionrom + else + printf "\n${bold}You can add it later by running:${bend}" + printf "\n${bold} $2 $3 add -f ./pci1002,$1.rom -n pci1002,$1.rom -t optionrom${bend}\n\n" + fi + fi + return 0 + else + printf "\n${byellow}WARNING${bend}: cannot find ./${bold}pci1002,$1.rom${bend} ," + printf "\n please re-apply ${bold}AMD atombios${bend} patch.\n" + encontinue + return 1 + fi + else + return 1 + fi +} + +# Adds a '$1.img' floppy image to coreboot '$3' ROM using '$2' cbfstool, printing '$4' size info. +floppy_adder () { + if file_exists "$2" && file_exists "$3" ; then + if [ -f "./floppies/$1.img" ] ; then + if [ -f "./floppies/.$1" ] ; then + floppy_adder_cbfs=$( "$2" "$3" print ) + if checker "$floppy_adder_cbfs" "floppyimg/$1.lzma" ; then + printf "\n${bgreen}NOTE${bend}: ./floppies/${bold}$1.img${bend} is already at your $3.\n" + else + if checker "$1" "plop" ; then + printf "\n${byellow}WARNING${bend}: ./floppies/${bold}$1.img${bend} - is proprietary: all its' source code is closed !" + printf "\n Add it only if you really need it and trust the author of $1 project.\n" + encontinue + fi + if yesno "\nAdd a ./floppies/${bold}$1.img${bend} to your $3 now? ${bold}~$4${bend}" ", adding..." ; then + "$2" "$3" add -f "./floppies/$1.img" -n "floppyimg/$1.lzma" -t raw -c lzma + else + printf "\n${bold}You can add it later by running:${bend}" + printf "\n${bold} $2 $3 add -f ./floppies/$1.img -n floppyimg/$1.lzma -t raw -c lzma${bend}\n\n" + fi + fi + return 0 + else + printf "\n${byellow}WARNING${bend}: there was a SHA256 mismatch for ./floppies/${bold}$1.img${bend} -" + printf "\n check sha256sum manually: sha256sum ./floppies/${bold}$1.img${bend}\n" + encontinue + return 1 + fi + else + printf "\n${byellow}WARNING${bend}: cannot find ./floppies/${bold}$1.img${bend} !\n" + printf "\n Please re-download a set of floppies.\n" + encontinue + return 1 + fi + else + return 1 + fi +} + +# Adds a set of AtomBIOS/floppies ('$1') to coreboot '$3' ROM copied to '$4', using '$2' cbfstool. +cbfs_mass_adder () { + if ! grepcheck "how to submit coreboot changes" ./MAINTAINERS ; then + printf "\n${byellow}WARNING${bend}: not sure if I am inside the coreboot directory," + printf "\n trying to add a ${bold}$1${bend} set from here - could fail.\n\n" + fi + if file_exists "$2" && file_exists "$3" ; then + if checker "$1" "atom" || checker "$1" "flop" ; then + copier "$3" "$4" + printf "\n${bold}=== $4 - initial memory map${bend}\n\n" + "$2" "$4" print + printf "\n" + if checker "$1" "atom" ; then +### +### https://review.coreboot.org/c/coreboot/+/58748 +### G505S AtomBIOS ROMs: known good binaries with a script to check their SHA256 +### + csb_patcher "atombios" "58748" "2" "d3c12c8" "f6a0d71ef0ceef69e74419e0f8c90b4ac9c121d8d283f5605ad6c652cd1ab3d2" "$1" "AMD " + atombios_adder "990b" "$2" "$4" "62K" "Lenovo G505S with A10-5750M" "iGPU HD-8650G" + atombios_adder "6663" "$2" "$4" "33K" "Lenovo G505S with A10-5750M" "dGPU HD-8570M" + atombios_adder "6665" "$2" "$4" "32K" "Lenovo G505S with A10-5750M" "dGPU R5-M230" + atombios_adder "9830" "$2" "$4" "59K" "ASUS AM1I-A with Athlon-5370" "iGPU HD-8400 / R3-Series" + atombios_adder "990c" "$2" "$4" "62K" "ASUS A88XM-E with A10-6700" "iGPU HD-8670D" + fi + if checker "$1" "flop" ; then + if [ ! -d "./floppies/" ] ; then + printf "\n" + floppy_mass_downloader + fi + # Default boot order: the last floppy added - is the first floppy to boot! + floppy_adder "floppybird" "$2" "$4" "3K" + floppy_adder "plop" "$2" "$4" "75K" + floppy_adder "tatos" "$2" "$4" "60K" + floppy_adder "memtest" "$2" "$4" "61K" + floppy_adder "fiwix" "$2" "$4" "499K" + floppy_adder "snowdrop" "$2" "$4" "182K" + floppy_adder "michalos" "$2" "$4" "575K" + floppy_adder "freedos" "$2" "$4" "368K" + floppy_adder "kolibri" "$2" "$4" "1296K" + fi + printf "\n${bold}=== $4 - final memory map${bend}\n\n" + "$2" "$4" print + printf "\nYou can use ./build/${bold}coreflop.rom${bend} now !\n\n" + return 0 + else + return 1 + fi + else + return 1 + fi +} + +# Finds the files of '$1' extension, saves the result to '$2' log and prints a message with '$3'. +csb_finder () { + csb_finder_files=$( find . -name "*.$1" ) + if [ ! -z "$csb_finder_files" ] ; then + printf "%25s\n" "*.$1 - YES" >> "$2" + printf "\n${byellow}WARNING${bend}: found ${bold}*.$1${bend} files at these locations :\n" + printf "$csb_finder_files" + printf "\n That means - Some patches $3\n" + encontinue + return 0 + else + printf "%24s\n" "*.$1 - NO" >> "$2" + return 1 + fi +} + +# Prints a csb_patcher_log '$1' with a custom highlighting. +csb_printer () { + if ! file_exists "$1" ; then + return 1 + fi + while IFS= read -r csb_printer_line + do + case "$csb_printer_line" in + *"orig - YES"*) + printf "${csb_printer_line%???}${byellow}YES" # YELLOW + ;; + *"rej - YES"*) + printf "${csb_printer_line%???}${bred}YES" # RED + ;; + *"YES"*) + printf "${csb_printer_line%???}${bgreen}YES" # GREEN + ;; + *"orig - NO"*|*"rej - NO"*) + printf "${csb_printer_line%??}${bgreen}NO" # GREEN + ;; + *"NO"*) + printf "${csb_printer_line%??}${byellow}NO" # YELLOW + ;; + *"FAILURE_1"*) + printf "${csb_printer_line%?????????}${bred}FAILURE_1" # RED + ;; + *"FAILURE_2"*) + printf "${csb_printer_line%?????????}${bred}FAILURE_2" # RED + ;; + *"FAILURE_3"*) + printf "${csb_printer_line%?????????}${bred}FAILURE_3" # RED + ;; + *"\\"*) + printf "${bold}${csb_printer_line%?????}\\!//" # ALIEN HAIR + ;; + *) + printf "${bold}$csb_printer_line" + ;; + esac + printf "${bend}\n" + done < "$1" + return 0 +} + +# Configure some popular options of a config file '$1'. +csb_configurer () { + if file_exists "$1" ; then + csb_configurer_tmp="./.csb_configurer" + rm -f "$csb_configurer_tmp" + # Check if the configuration of this board is supported. + grepper "CONFIG_BOARD_" "$1" > "$csb_configurer_tmp" + if grepcheck "_LENOVO_G505S=y" "$csb_configurer_tmp" ; then + printf "\n\n${bgreen}[CONFIG]${bend} Questions about your Lenovo G505S\n\n" + else + if grepcheck "_ASUS_AM1I_A=y" "$csb_configurer_tmp" ; then + printf "\n\n${bgreen}[CONFIG]${bend} Questions about your ASUS AM1I-A\n\n" + else + if grepcheck "_ASUS_A88XM_E=y" "$csb_configurer_tmp" ; then + printf "\n\n${bgreen}[CONFIG]${bend} Questions about your ASUS A88XM-E\n\n" + else + printf "\n\n${byellow}WARNING${bend}: sorry, I don't know how to configure a board of ${bold}$1${bend}\n" + encontinue + return 1 + fi + fi + fi + # Common part both for LENOVO G505S and ASUS AM1I-A / A88XM-E. + sedder "$1" "### CSB_CONFIGURER OPTIONS" "" + printf "### CSB_CONFIGURER OPTIONS\n" >> "$1" + sedder "$1" "# CONFIG_DRIVERS_INTEL_WIFI is not set" "" + sedder "$1" "CONFIG_DRIVERS_INTEL_WIFI=y" "" + if yesno "Do you have an Intel WiFi adapter?" "" ; then + printf "CONFIG_DRIVERS_INTEL_WIFI=y\n" >> "$1" + else + printf "# CONFIG_DRIVERS_INTEL_WIFI is not set\n" >> "$1" + fi + # This part is only for LENOVO G505S. + if grepcheck "_LENOVO_G505S=y" "$csb_configurer_tmp" ; then + sedder "$1" "# CONFIG_AMD_DGPU_WITHOUT_EEPROM is not set" "" + sedder "$1" "CONFIG_AMD_DGPU_WITHOUT_EEPROM=y" "" + sedder "$1" "# CONFIG_VGA_BIOS_DGPU is not set" "" + sedder "$1" "CONFIG_VGA_BIOS_DGPU=y" "" + sedder "$1" "CONFIG_VGA_BIOS_DGPU_FILE="pci1002,6663.rom"" "" + sedder "$1" "CONFIG_VGA_BIOS_DGPU_ID="1002,6663"" "" + sedder "$1" "CONFIG_VGA_BIOS_DGPU_FILE="pci1002,6665.rom"" "" + sedder "$1" "CONFIG_VGA_BIOS_DGPU_ID="1002,6665"" "" + if yesno "Do you have a Discrete GPU?" "" ; then + printf "CONFIG_AMD_DGPU_WITHOUT_EEPROM=y\n" >> "$1" + printf "CONFIG_VGA_BIOS_DGPU=y\n" >> "$1" + if yesno "No for HD-8570M, Yes for R5-M230" "" ; then + printf "CONFIG_VGA_BIOS_DGPU_FILE="pci1002,6665.rom"\n" >> "$1" + printf "CONFIG_VGA_BIOS_DGPU_ID="1002,6665"\n" >> "$1" + else + printf "CONFIG_VGA_BIOS_DGPU_FILE="pci1002,6663.rom"\n" >> "$1" + printf "CONFIG_VGA_BIOS_DGPU_ID="1002,6663"\n" >> "$1" + fi + else + printf "# CONFIG_AMD_DGPU_WITHOUT_EEPROM is not set\n" >> "$1" + printf "# CONFIG_VGA_BIOS_DGPU is not set\n" >> "$1" + fi + fi + # Common part both for LENOVO G505S and ASUS AM1I-A / A88XM-E. + # HUDSON_SATA_MODE=0 + sedder "$1" "# NATIVE" "" + sedder "$1" "CONFIG_HUDSON_SATA_MODE=0" "" + # HUDSON_SATA_MODE=1 + sedder "$1" "# RAID" "" + sedder "$1" "CONFIG_HUDSON_SATA_MODE=1" "" + sedder "$1" "CONFIG_RAID_ROM_ID="1022,7802"" "" + sedder "$1" "CONFIG_RAID_ROM_FILE="src/southbridge/amd/agesa/hudson/raid.bin"" "" + sedder "$1" "CONFIG_RAID_MISC_ROM_FILE="src/southbridge/amd/agesa/hudson/misc.bin"" "" + sedder "$1" "CONFIG_RAID_MISC_ROM_POSITION=0xFFF00000" "" + # HUDSON_SATA_MODE=2 + sedder "$1" "# AHCI" "" + sedder "$1" "CONFIG_HUDSON_SATA_MODE=2" "" + sedder "$1" "CONFIG_AHCI_ROM_ID="1022,7801"" "" + sedder "$1" "# CONFIG_HUDSON_AHCI_ROM is not set" "" + # HUDSON_SATA_MODE=3 + sedder "$1" "# LEGACY IDE" "" + sedder "$1" "CONFIG_HUDSON_SATA_MODE=3" "" + # HUDSON_SATA_MODE=4 + sedder "$1" "# IDE to AHCI" "" + sedder "$1" "CONFIG_HUDSON_SATA_MODE=4" "" + # HUDSON_SATA_MODE=5 + sedder "$1" "# AHCI7804" "" + sedder "$1" "CONFIG_HUDSON_SATA_MODE=5" "" + sedder "$1" "CONFIG_AHCI_ROM_ID="1022,7804"" "" + # HUDSON_SATA_MODE=6 + sedder "$1" "# IDE to AHCI7804" "" + sedder "$1" "CONFIG_HUDSON_SATA_MODE=6" "" + sedder "$1" "# CONFIG_HUDSON_AHCI_ROM is not set" "" + # HUDSON_SATA_MODE SETUP + if yesno "Do you have a SSD? (enable AHCI if Y)" "" ; then + printf "# AHCI\n" >> "$1" + printf "CONFIG_HUDSON_SATA_MODE=2\n" >> "$1" + printf "CONFIG_AHCI_ROM_ID="1022,7801"\n" >> "$1" + printf "# CONFIG_HUDSON_AHCI_ROM is not set\n" >> "$1" + else + printf "# NATIVE\n" >> "$1" + printf "CONFIG_HUDSON_SATA_MODE=0\n" >> "$1" + fi + # Board has been configured. + printf "\n" + rm -f "$csb_configurer_tmp" + return 0 + else + return 1 + fi +} + +# +# Conveniently and securely gets, checks SHA256 and installs a patch. +# Arguments are the patch properties: +# $1 - new diff name, could be also a part of extracted scripts' filename +# $2 - change ID number, part of download link to review.coreboot.org +# $3 - change revision number, part of download link to review.coreboot.org +# $4 - diff filename inside the downloaded archive, will be renamed to $1 +# $5 - diff known good SHA256 checksum, will be used for SHA256 verification +# $6 - filepath where to save a csb_patcher_log which will be printed later +# $7 - info about the target of a patch, if not specified ("") it is common +# +csb_patcher () { + if ! wgetter "./patch?zip" "https://review.coreboot.org/changes/$2/revisions/$3/patch?zip" ; then + printf "${bold}^^^ ! Can't download a $7$1 patch ! Check your Internet.${bend}\n" + printf "%31s\n" "$7$1 - FAILURE_1" >> "$6" + csb_printer "$6" + exit 1 + fi + unzipper "./patch?zip" + mover "./$4.diff" "./$1.diff" + csb_patcher_sha256sum_correct="$5 ./$1.diff" + csb_patcher_sha256sum_my=$( sha256sum "./$1.diff" ) + printf "\n=== sha256sum should be:\n${bold}$csb_patcher_sha256sum_correct${bend}\n" + if [ "$csb_patcher_sha256sum_my" = "$csb_patcher_sha256sum_correct" ] ; then + printf "^^^ this is correct, " + csb_patcher_patch_title=$( grepper "Subject" "./$1.diff" ) + csb_patcher_patch_title=${csb_patcher_patch_title#?????????????????} + if [ "$1" = "dgpu" ] || [ "$1" = "irq" ] || [ "$1" = "cfgsb" ] ; then + printf "will extract a ${bold}$7$1${bend} patch now...\n" + rm -f "./sha256sums_$1_correct.txt" + rm -f "./"*"_$1_patches.sh" + patch -p1 < "./$1.diff" + chmod +x "./"*"_$1_patches.sh" + "./get_$1_patches.sh" + if ! "./check_$1_patches.sh" ; then + printf "%31s\n" "$7$1 - FAILURE_3" >> "$6" + csb_printer "$6" + exit 1 + fi + else + printf "${bold}$7$1${bend} patch could be applied now...\n" + fi + if [ "$1" = "dgpu" ] || [ "$1" = "atombios" ] || [ "$1" = "irq" ] || \ + [ "$1" = "A88XM-E" ] || [ "$1" = "seabios" ] || [ "$1" = "cfgsb" ] ; then + printf "\n\n${bgreen}[PATCH]${bend} $csb_patcher_patch_title\n\n" + if ! grepcheck "how to submit coreboot changes" ./MAINTAINERS ; then + printf "\n${byellow}WARNING${bend}: not sure if I am inside the coreboot directory," + printf "\n trying to add a ${bold}$1${bend} set from here - could fail.\n\n" + fi + if [ -f "./.$1" ] ; then + printf "\n${byellow}WARNING${bend}: found a '.$1' hidden file at the current directory," + printf "\n maybe you have applied this patch already.\n\n" + fi + if yesno "Apply a ${bold}$7$1${bend} patch now?" "" ; then + if [ "$1" = "dgpu" ] || [ "$1" = "irq" ] || [ "$1" = "cfgsb" ] ; then + "./apply_$1_patches.sh" + else + if [ "$1" = "atombios" ] ; then + rm -f "./sha256sums_$1_correct.txt" + rm -f "./"*"_$1_roms.sh" + rm -f "./pci1002,"*".rom" + rm -f "./pci1002,"*".rom.txt" + fi + if [ "$1" = "seabios" ] ; then + rm -f "./payloads/external/SeaBIOS/"*".patch" + fi + patch -p1 < "./$1.diff" + if [ "$1" = "atombios" ] ; then + chmod +x "./"*"_$1_roms.sh" + "./extract_$1_roms.sh" + printf "\n" + if ! "./check_$1_roms.sh" ; then + printf "%31s\n" "$7$1 - FAILURE_3" >> "$6" + csb_printer "$6" + exit 1 + fi + fi + fi + touch ".$1" + printf "%25s\n" "$7$1 - YES" >> "$6" + if [ "$1" = "atombios" ] ; then + encontinue + fi + else + printf "%24s\n" "$7$1 - NO" >> "$6" + printf "\n${bold}You can apply it later by running:${bend}" + if [ "$1" = "dgpu" ] || [ "$1" = "irq" ] || [ "$1" = "cfgsb" ]; then + printf "\n${bold} ./apply_$1_patches.sh${bend}\n" + else + printf "\n${bold} patch -p1 < ./$1.diff${bend}\n" + fi + encontinue + fi + fi + if checker "$1" "config" ; then + rm -f "./configs/$1"* + patch -p1 < "./$1.diff" + printf "\n\n${bgreen}[PATCH]${bend} $csb_patcher_patch_title\n\n" + ls "./configs" > "./.csb_configs" + csb_patcher_config_name=$( grepper "$1" "./.csb_configs" ) + rm -f "./.csb_configs" + printf "\n${bold}$csb_patcher_config_name could now be found at ./configs/${bend}" + printf "\n${bold}To use it, it should be copied to '.config' of your ./coreboot directory.${bend}\n\n" + if [ -f "./.config" ] ; then + printf "\n${byellow}WARNING${bend}: copying it to ./.config will overwrite your current '.config'\n\n" + fi + if yesno "Copy it to ./.config now?" "" ; then + copier "./configs/$csb_patcher_config_name" "./.config" + printf "\n" + printf "%25s\n" "$7$1 - YES" >> "$6" + if yesno "Configure this ./.config now?" "" ; then + csb_configurer "./.config" + else + printf "\n${bold}You can configure it later by running:${bend}" + printf "\n${bold} ./csb_patcher.sh config${bend}\n\n" + fi + else + printf "%24s\n" "$7$1 - NO" >> "$6" + printf "\n${bold}You can copy it later by running:${bend}" + printf "\n${bold} cp ./configs/$csb_patcher_config_name ./.config${bend}\n" + fi + printf "\n${byellow}WARNING${bend}: important README at the beginning of ./$1.diff\n" + encontinue + fi + printf "\n\n" + return 0 + else + printf "${bold}^^^ ! MISMATCH for a $7$1 patch ! Check sha256sum manually: sha256sum ./$1.diff${bend}\n" + printf "%31s\n" "$7$1 - FAILURE_2" >> "$6" + csb_printer "$6" + exit 1 + fi +} + +# Prints the currently-known errata: what you might need to do to ensure a stable coreboot build. +csb_errata () { + printf "\n${byellow}WARNING${bend}: to ensure a stable coreboot build, you might need to" + printf "\n ${bold}downgrade the GCC${bend} of a coreboot toolchain with three commands:\n" + printf "\n ${bold}1)${bend} git revert ce134ababd6a444082962ccdfcd34415a647f41e" + printf "\n ${bold}2)${bend} git revert b0d87f753c9c517ba906115362d32aa4422fd188" + printf "\n ${bold}3)${bend} make crossgcc-i386\n\n" + if yesno "This should be manually done before patching. ${bold}Continue patching?${bend}" "" ; then + return 0 + else + exit 1 + fi +} + +# +# Conveniently and securely gets, checks SHA256 and applies my collection of unofficial patches. +# $1 - filepath where to save a csb_patcher_log which will be printed later +# +csb_mass_patcher () { +### +### https://review.coreboot.org/c/coreboot/+/58745 +### G505S dGPU support: scripts for applying the unofficial (not-merged-yet) patches +### + csb_patcher "dgpu" "58745" "3" "0cf99e4" "d6b3328b2c58debed96ba9f8c71f6b9fa7673ce5c01c6c96492dab2ba6377af7" "$1" "G505S " +### +### https://review.coreboot.org/c/coreboot/+/58748 +### G505S AtomBIOS ROMs: known good binaries with a script to check their SHA256 +### + csb_patcher "atombios" "58748" "2" "d3c12c8" "f6a0d71ef0ceef69e74419e0f8c90b4ac9c121d8d283f5605ad6c652cd1ab3d2" "$1" "AMD " +### +### https://review.coreboot.org/c/coreboot/+/48427 +### AMD good IRQs: scripts for applying the unofficial (not-merged-yet) patches +### + csb_patcher "irq" "48427" "13" "337b193" "47511fe883ed603879b5ca90606b44dc76c0564f44562742eaa43226974dc9f1" "$1" "AMD good " +### +### https://review.coreboot.org/c/coreboot/+/32351 +### SeaBIOS patches: advanced_bootmenu, multiple_floppies, smbios_mptable_768 +### + csb_patcher "seabios" "32351" "16" "726e469" "be7f432355f30f7a6220059a558d4fc0ce1b6f1f84a238020983190764f52935" "$1" "" +### +### https://review.coreboot.org/c/coreboot/+/44638 +### Disable SeaBIOS options unsupported by hardware: scripts to apply the patches +### + csb_patcher "cfgsb" "44638" "1" "fc98bfa" "dae0ff00c5b3aa69d1a205b0e53f3a6c11437e24439bf5b936594506a3ed9d44" "$1" "for-configs " +### +### https://review.coreboot.org/c/coreboot/+/64829 +### configs: add Lenovo G505S sample configuration (use with dGPU patches) +### +csb_patcher "config.lenovo_g505s" "64829" "1" "941b5c7" "d1ebfb0df3f6fa237b0f61a4236f30652bcd3606ae659ff3e958944081cdafe8" "$1" "" +### +### https://review.coreboot.org/c/coreboot/+/64831 +### configs: add ASUS AM1I-A sample configuration +### + csb_patcher "config.asus_am1i-a" "64831" "1" "6c178df" "86fee19e7e87d2b6ab36547259bf955a05680b60ccdcdc9999978397a2f2c794" "$1" "" +### +### https://review.coreboot.org/c/coreboot/+/64832 +### configs: add ASUS A88XM-E sample configuration +### +csb_patcher "config.asus_a88xm-e" "64832" "1" "0afd75d" "c9945bc94963dc40129b043c5d8b164cf7e74a115976d7a4af2991e15cb64e66" "$1" "" + + return 0 +} + +# Prints a usage info for this ./csb_patcher.sh script. +csb_usage () { + printf "${bold}===============${bend} ${bgreen}USAGE${bend} ${bold}================${bend}\n\n" + printf "${bold}./csb_patcher.sh${bend}\n" + printf " patch your coreboot source code\n\n" + printf "${bold}./csb_patcher.sh${bend} ${byellow}help${bend} ${bold}|${bend} ${byellow}usage${bend}\n" + printf " print this usage info\n\n" + printf "${bold}==================== Before building :${bend}\n\n" + printf "${bold}./csb_patcher.sh ${byellow}config${bend}\n" + printf " configure some popular options\n\n" + printf "${bold}==================== After building :${bend}\n\n" + printf "${bold}./csb_patcher.sh ${byellow}atom${bend}\n" + printf " add the AtomBIOS to coreboot.rom\n\n" + printf "${bold}./csb_patcher.sh ${byellow}flop${bend}\n" + printf " add the floppies to coreboot.rom\n\n" + printf "${bold}./csb_patcher.sh ${byellow}atomflop${bend}\n" + printf " both AtomBIOS VGA ROMs and floppies\n\n" + printf "${bold}./csb_patcher.sh${bend} ${byellow}print${bend}\n" + printf " print a ./.csb_patcher log\n\n" + return 0 +} + +# +# MAIN PART OF A CSB_PATCHER SCRIPT +# + +if [ -z "$1" ] ; then + csb_patcher_log="./.csb_patcher" + rm -f "$csb_patcher_log" + if ! command_exists "wget" || \ + ! command_exists "unzip" || \ + ! command_exists "sha256sum" || \ + ! command_exists "patch" || \ + ! command_exists "xxd" ; then + exit 1 + fi + printf '\n\n' >> "$csb_patcher_log" + printf ' \\!//\n' >> "$csb_patcher_log" + printf ' (o o)\n' >> "$csb_patcher_log" + printf ' oOOo-(_)-oOOo\n' >> "$csb_patcher_log" + printf 'Hi! I am coreboot and SeaBIOS patcher\n' >> "$csb_patcher_log" + printf 'Please send your feedback to\n' >> "$csb_patcher_log" + printf ' Mike Banon mikebdp2@gmail.com\n' >> "$csb_patcher_log" + csb_printer "$csb_patcher_log" + encontinue + + csb_errata + printf '\n=== CSB_PATCHER LOG. Patches applied?\n' >> "$csb_patcher_log" + + csb_mass_patcher "$csb_patcher_log" + + if yesno "Download a ${bold}floppies${bend} collection?" "" ; then + floppy_mass_downloader + printf "%25s\n" "floppies - YES" >> "$csb_patcher_log" + else + printf "\n" + printf "%24s\n" "floppies - NO" >> "$csb_patcher_log" + fi + + printf '==================== Bad files found?\n' >> "$csb_patcher_log" + csb_finder "orig" "$csb_patcher_log" "applied correctly although at slightly different lines, can ignore it." + csb_finder "rej" "$csb_patcher_log" "perhaps failed to apply, could result in a broken build! ${bred}Please report${bend}" + + printf '\n' >> "$csb_patcher_log" + csb_printer "$csb_patcher_log" + csb_usage +else + case "$1" in + *"print"*) + csb_patcher_log="./.csb_patcher" + csb_printer "$csb_patcher_log" + ;; + *"config"*) + csb_configurer "./.config" + ;; + *"atom"*|*"flop"*) + if ! command_exists "wget" || \ + ! command_exists "unzip" || \ + ! command_exists "sha256sum" || \ + ! command_exists "patch" || \ + ! command_exists "xxd" ; then + exit 1 + fi + cbfs_mass_adder "$1" "./build/cbfstool" "./build/coreboot.rom" "./build/coreflop.rom" + ;; + *"help"*|*"usage"*) + printf "\n" + csb_usage + ;; + *) + printf "\n${bred}ERROR${bend}: unknown argument ${bold}$1${bend} !\n\n" + csb_usage + exit 1 + ;; + esac +fi + +exit 0 + +#