Change in coreboot[master]: driver/usb/acpi: Add power resources for devices on USB ports

[Karthik Ramasubramanian (Code Review)]

Hello build bot (Jenkins), Furquan Shaikh, Tim Wawrzynczak,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/46713

to look at the new patch set (#3).

Change subject: driver/usb/acpi: Add power resources for devices on USB ports
......................................................................

driver/usb/acpi: Add power resources for devices on USB ports

Allow a USB device to define PowerResource in its SSDT AML code.
PowerResouce ACPI generation expects SoC to define the callbacks for
generating AML code for GPIO manipulation.

Device requiring PowerResource needs to define following parameters:
* Reset GPIO - Optional, GPIO to put device into reset or take it out
of reset.
* Reset delay - Delay after reset GPIO is asserted (default 0).
* Reset off delay - Delay after reset GPIO is de-asserted (default 0).
* Enable GPIO - Optional, GPIO to enable device.
* Enable delay - Delay after enable GPIO is asserted (default 0).
* Enable off delay - Delay after enable GPIO is de-asserted (default 0).

BUG=b:163100335
TEST=Ensure that the Power Resource ACPI object is added under the
concerned USB device.

Change-Id: Icc1aebfb9e3e646a7f608f0cd391079fd30dd1c0
Signed-off-by: Karthikeyan Ramasubramanian 
---
M src/drivers/usb/acpi/chip.h
M src/drivers/usb/acpi/usb_acpi.c
2 files changed, 32 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/13/46713/3