[S] Change in coreboot[master]: mb/siemens/mc_ehl2: Set I2C bus 1 speed to 100 kHz

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/67102 )

(

2 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.
 )Change subject: mb/siemens/mc_ehl2: Set I2C bus 1 speed to 100 kHz
......................................................................

mb/siemens/mc_ehl2: Set I2C bus 1 speed to 100 kHz

Since the new RTC is located in I2C bus 1 now, set the bus speed to
100 kHz as well.

Change-Id: Ica9468e559bc654545592a9b4d23f3164eafca8a
Signed-off-by: Werner Zeh 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67102
Reviewed-by: Mario Scheithauer 
Tested-by: build bot (Jenkins) 
---
M src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb
1 file changed, 19 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Mario Scheithauer: Looks good to me, approved

diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb
index 78101d7..ecf5d55 100644
--- a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb
@@ -109,6 +109,9 @@
    register "pse_tsn_phy_irq_edge[1]" = "RISING_EDGE"

register "common_soc_config" = "{
+		.i2c[1] = {
+			.speed = I2C_SPEED_STANDARD,
+		},
    	.i2c[2] = {
    		.speed = I2C_SPEED_STANDARD,
    	},