Change in coreboot[master]: drivers/pcie/rtd3/device: Add PCIe RTD3 driver

[Raul Rangel (Code Review)]

Attention is currently required from: Jason Glenesk, Furquan Shaikh, Marshall Dawson, Paul Menzel, Karthik Ramasubramanian, Felix Held.
Hello build bot (Jenkins), Jason Glenesk, Furquan Shaikh, Marshall Dawson, Tim Wawrzynczak, Karthik Ramasubramanian, Felix Held,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/54966

to look at the new patch set (#6).

Change subject: drivers/pcie/rtd3/device: Add PCIe RTD3 driver
......................................................................

drivers/pcie/rtd3/device: Add PCIe RTD3 driver

This driver was inspired from soc/intel/common/block/pci/rtd3. I decided
to copy and modify it because the Intel driver has a lot of Intel
specific code.

This driver has been stripped down to only provide a power resource and
set the StorageD3Enable property. This driver is SoC agnostic and does
not handle suspending the actual PCIe root port. That should be
implemented by an SoC specific driver.

This is required for Guybrush to suspend/resume properly because the
NVMe power is tied to the S0 power rails, so the kernel needs to place
the device into D3.

BUG=b:184617186
TEST=Guybrush is able to suspend/resume properly. Also see power
resource get enabled / disabled.
[   56.075559]     power-0416 __acpi_power_off      : Power resource [RTD3] turned off
[   56.075562] device_pm-0279 device_set_power      : Device [PXSX] transitioned to D3cold
[   56.075567] pci_pm_suspend_noirq: nvme 0000:02:00.0: PCI PM: Suspend power state: D3cold
[   56.075569] nvme 0000:02:00.0: pci_pm_suspend_noirq+0x0/0x413 returned 0 after 15978 usecs

[  123.464874] nvme 0000:02:00.0: calling pci_pm_resume_noirq+0x0/0x11d @ 7, parent: 0000:00:02.4
[  123.464891] acpi_device_set_power: ACPI: _SB_.PCI0.GP14.PXSX: Power state change: D3cold -> D0
[  123.464982]     power-0360 __acpi_power_on       : Power resource [RTD3] turned on
[  123.464984] device_pm-0279 device_set_power      : Device [PXSX] transitioned to D0
[  123.465039] nvme 0000:02:00.0: pci_pm_resume_noirq+0x0/0x11d returned 0 after 158 usecs

Signed-off-by: Raul E Rangel 
Change-Id: I2adfc925183ff7a19ab97e89212bc87c40d552d0
---
A src/drivers/pcie/rtd3/device/Kconfig
A src/drivers/pcie/rtd3/device/Makefile.inc
A src/drivers/pcie/rtd3/device/chip.c
A src/drivers/pcie/rtd3/device/chip.h
4 files changed, 204 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/66/54966/6