[XS] Change in coreboot[main]: mb/starlabs/starbook/adl_n: Remove switch property from back USB port

[Sean Rhodes (Code Review)]

Sean Rhodes has submitted this change. ( https://review.coreboot.org/c/coreboot/+/86086?usp=email )

(

1 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.
 )Change subject: mb/starlabs/starbook/adl_n: Remove switch property from back USB port
......................................................................

mb/starlabs/starbook/adl_n: Remove switch property from back USB port

The back USB port is a data-only port without switching, so
update the ACPI configuration accordingly.

Change-Id: Ic6b77f44a2d2607d201a2b097cea41aa361ebbee
Signed-off-by: Sean Rhodes 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86086
Tested-by: build bot (Jenkins) 
Reviewed-by: Matt DeVillier 
---
M src/mainboard/starlabs/starbook/variants/adl_n/devicetree.cb
1 file changed, 2 insertions(+), 2 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Matt DeVillier: Looks good to me, approved

diff --git a/src/mainboard/starlabs/starbook/variants/adl_n/devicetree.cb b/src/mainboard/starlabs/starbook/variants/adl_n/devicetree.cb
index cf52628..2bfe475 100644
--- a/src/mainboard/starlabs/starbook/variants/adl_n/devicetree.cb
+++ b/src/mainboard/starlabs/starbook/variants/adl_n/devicetree.cb
@@ -72,13 +72,13 @@
    			device ref xhci_root_hub on
    				chip drivers/usb/acpi
    					register "desc"		= ""Back USB Type-C""
-						register "type"		= "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "type"		= "UPC_TYPE_C_USB2_SS"
    					register "group"	= "ACPI_PLD_GROUP(0, 0)"
    					device ref usb2_port2 on end
    				end
    				chip drivers/usb/acpi
    					register "desc"		= ""Back USB Type-C""
-						register "type"		= "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "type"		= "UPC_TYPE_C_USB2_SS"
    					register "group"	= "ACPI_PLD_GROUP(0, 0)"
    					device ref usb3_port3 on end
    				end