New patch to review for coreboot: 6c2c365 CIMx/SB800: Make initialization messages more consistent
Mike Loptien (mike.loptien@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5951
-gerrit
commit 6c2c3657710ca6ca49cd06a77eb496494d1ae33b Author: Mike Loptien mike.loptien@se-eng.com Date: Fri Jun 6 15:25:44 2014 -0600
CIMx/SB800: Make initialization messages more consistent
The messaging in the SB800 late.c initialization was very inconsistent. Making this more consistent makes it easier to trace where the initialization routine is.
Change-Id: Iab33118ba8d9138b48ecbb2ae0b7eb8ba4d486d1 Signed-off-by: Mike Loptien mike.loptien@se-eng.com --- src/southbridge/amd/cimx/sb800/late.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/src/southbridge/amd/cimx/sb800/late.c b/src/southbridge/amd/cimx/sb800/late.c index 4352a2f..a68a9b5 100644 --- a/src/southbridge/amd/cimx/sb800/late.c +++ b/src/southbridge/amd/cimx/sb800/late.c @@ -341,10 +341,10 @@ static void sb800_enable(device_t dev) struct southbridge_amd_cimx_sb800_config *sb_chip = (struct southbridge_amd_cimx_sb800_config *)(dev->chip_info);
- printk(BIOS_DEBUG, "sb800_enable() "); - + printk(BIOS_SPEW, "%s: Enabling ", __func__); switch (dev->path.pci.devfn) { case (0x11 << 3) | 0: /* 0:11.0 SATA */ + printk(BIOS_SPEW, "SATA: 0:11.0\n"); /* the first sb800 device */ switch (GPP_CFGMODE) { /* config the GPP PCIe ports */ case GPP_CFGMODE_X2200: @@ -375,7 +375,7 @@ static void sb800_enable(device_t dev) break;
case (0x14 << 3) | 0: /* 0:14:0 SMBUS */ - printk(BIOS_INFO, "sm_init().\n"); + printk(BIOS_SPEW, "SMBUS: 0:14.0\n");
/* Write PCI_INTR table */ write_pci_int_table(); @@ -402,22 +402,24 @@ static void sb800_enable(device_t dev) break;
case (0x14 << 3) | 1: /* 0:14:1 IDE */ + printk(BIOS_SPEW, "IDE: 0:14.1\n"); break;
case (0x14 << 3) | 2: /* 0:14:2 HDA */ + printk(BIOS_SPEW, "HDA: 0:14.2\n"); if (dev->enabled) { if (AZALIA_DISABLE == sb_config->AzaliaController) { sb_config->AzaliaController = AZALIA_AUTO; } - printk(BIOS_DEBUG, "hda enabled\n"); + printk(BIOS_DEBUG, "\thda enabled\n"); } else { sb_config->AzaliaController = AZALIA_DISABLE; - printk(BIOS_DEBUG, "hda disabled\n"); + printk(BIOS_DEBUG, "\thda disabled\n"); } break;
- case (0x14 << 3) | 3: /* 0:14:3 LPC */ + printk(BIOS_SPEW, "LPC: 0:14.3\n"); /* Initialize the fans */ #if CONFIG_SB800_IMC_FAN_CONTROL init_sb800_IMC_fans(dev); @@ -427,19 +429,22 @@ static void sb800_enable(device_t dev) break;
case (0x14 << 3) | 4: /* 0:14:4 PCI */ + printk(BIOS_SPEW, "PCI Bridge: 0:14.4\n"); break;
case (0x14 << 3) | 6: /* 0:14:6 GEC */ + printk(BIOS_SPEW, "GEC: 0:14.6\n"); if (dev->enabled) { sb_config->GecConfig = 0; - printk(BIOS_DEBUG, "gec enabled\n"); + printk(BIOS_SPEW, "\tgec enabled\n"); } else { sb_config->GecConfig = 1; - printk(BIOS_DEBUG, "gec disabled\n"); + printk(BIOS_SPEW, "\tgec disabled\n"); } break;
case (0x15 << 3) | 0: /* 0:15:0 PCIe PortA */ + printk(BIOS_SPEW, "PCIe PortA: 0:15.0\n"); { device_t device; for (device = dev; device; device = device->next) { @@ -459,24 +464,31 @@ static void sb800_enable(device_t dev) break;
case (0x12 << 3) | 0: /* 0:12:0 OHCI-USB1 */ + printk(BIOS_SPEW, "USB OHCI1: 0:12.0\n"); sb_config->USBMODE.UsbMode.Ohci1 = dev->enabled; break; case (0x12 << 3) | 2: /* 0:12:2 EHCI-USB1 */ + printk(BIOS_SPEW, "USB EHCI1: 0:12.2\n"); sb_config->USBMODE.UsbMode.Ehci1 = dev->enabled; break; case (0x13 << 3) | 0: /* 0:13:0 OHCI-USB2 */ + printk(BIOS_SPEW, "USB OHCI2: 0:13.0\n"); sb_config->USBMODE.UsbMode.Ohci2 = dev->enabled; break; case (0x13 << 3) | 2: /* 0:13:2 EHCI-USB2 */ + printk(BIOS_SPEW, "USB EHCI2: 0:13.2\n"); sb_config->USBMODE.UsbMode.Ehci2 = dev->enabled; break; case (0x14 << 3) | 5: /* 0:14:5 OHCI-USB4 */ + printk(BIOS_SPEW, "USB OHCI4: 0:14.5\n"); sb_config->USBMODE.UsbMode.Ohci4 = dev->enabled; break; case (0x16 << 3) | 0: /* 0:16:0 OHCI-USB3 */ + printk(BIOS_SPEW, "USB OHCI3: 0:16.0\n"); sb_config->USBMODE.UsbMode.Ohci3 = dev->enabled; break; case (0x16 << 3) | 2: /* 0:16:2 EHCI-USB3 */ + printk(BIOS_SPEW, "USB EHCI3: 0:16.2\n"); sb_config->USBMODE.UsbMode.Ehci3 = dev->enabled;
/* call the CIMX entry at the last sb800 device,
-
Mike Loptien