Change in coreboot[master]: mb/google/mancomb: Configure UART0 gpio in early stage

[Martin Roth (Code Review)]

Martin Roth has submitted this change. ( https://review.coreboot.org/c/coreboot/+/52122 )

Change subject: mb/google/mancomb: Configure UART0 gpio in early stage
......................................................................

mb/google/mancomb: Configure UART0 gpio in early stage

BUG=b:182211161
TEST=builds

Signed-off-by: Eric Lai 
Change-Id: I2d4ec1556ac7136c454eb025ff99aafbf49b8982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52122
Tested-by: build bot (Jenkins) 
Reviewed-by: Raul Rangel 
---
M src/mainboard/google/mancomb/variants/baseboard/gpio.c
1 file changed, 4 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Raul Rangel: Looks good to me, approved

diff --git a/src/mainboard/google/mancomb/variants/baseboard/gpio.c b/src/mainboard/google/mancomb/variants/baseboard/gpio.c
index 5a6f2ac..1eb1b80 100644
--- a/src/mainboard/google/mancomb/variants/baseboard/gpio.c
+++ b/src/mainboard/google/mancomb/variants/baseboard/gpio.c
@@ -166,6 +166,10 @@
    PAD_NF(GPIO_107, SPI2_HOLD_L_ESPI2_D3, PULL_NONE),
    /* ESPI_ALERT_L */
    PAD_NF(GPIO_108, ESPI_ALERT_D1, PULL_NONE),
+	/* UART0_RXD */
+	PAD_NF(GPIO_141, UART0_RXD, PULL_NONE),
+	/* UART0_TXD */
+	PAD_NF(GPIO_143, UART0_TXD, PULL_NONE),
 };

/* GPIO configuration for sleep */