Change in coreboot[master]: mb/google/brya/variants/brask: Disable autonomous GPIO power management

[Zhuohao Lee (Code Review)]

Attention is currently required from: Nick Vaccaro, Zhuohao Lee.
Hello build bot (Jenkins), Tim Wawrzynczak, Nick Vaccaro,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/60100

to look at the new patch set (#2).

Change subject: mb/google/brya/variants/brask: Disable autonomous GPIO power management
......................................................................

mb/google/brya/variants/brask: Disable autonomous GPIO power management

We found that the `Cr50 i2c TPM IRQ timeout!` error when the device
executed the reboot test even though we have updated the cr50
firmware to the 0.6.70. Besides, we also need to avoid the factory
power on issue when using the 0.3.22 cr50 firmware. So, we submitted
this patch to disable the gpio power management.

BUG=b:210540890
TEST=reboot 100 cycles without the error message.

Change-Id: I5f18fea5bc28493107c6d4951805de640a0b8ae5
Signed-off-by: Zhuohao Lee 
---
M src/mainboard/google/brya/variants/brask/overridetree.cb
1 file changed, 10 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/00/60100/2