Change in ...coreboot[master]: mb/google/octopus/variants: Disable xHCI compliance mode for Fleex

[Amanda Hwang (Code Review)]

Amanda Hwang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30984

Change subject: mb/google/octopus/variants: Disable xHCI compliance mode for Fleex
......................................................................

mb/google/octopus/variants: Disable xHCI compliance mode for Fleex

Some usb devices exhibits signal loss which causes xHCI entering
compliance mode. The resolution is to disable xHCI compliance mode.

BRANCH=octopus
BUG=b:120009029
TEST=Verified usb operation successfully.

Change-Id: Ic7fa08c894397598dee3c4ff9a764e43383a0627
Signed-off-by: Amanda Huang 
---
M src/mainboard/google/octopus/variants/fleex/overridetree.cb
1 file changed, 3 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/84/30984/1

diff --git a/src/mainboard/google/octopus/variants/fleex/overridetree.cb b/src/mainboard/google/octopus/variants/fleex/overridetree.cb
index a6df66b..19246e0 100644
--- a/src/mainboard/google/octopus/variants/fleex/overridetree.cb
+++ b/src/mainboard/google/octopus/variants/fleex/overridetree.cb
@@ -140,4 +140,7 @@
    		end
    	end	# - I2C 7
    end
+
+	# Disable compliance mode
+	register "DisableComplianceMode" = "1"
 end

[Justin TerAvest (Code Review)]

Justin TerAvest has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/30984 )

Change subject: mb/google/octopus/variants: Disable xHCI compliance mode for Fleex
......................................................................

Patch Set 1: Code-Review+2

[Karthik Ramasubramanian (Code Review)]

Karthik Ramasubramanian has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/30984 )

Change subject: mb/google/octopus/variants: Disable xHCI compliance mode for Fleex
......................................................................

Patch Set 1: Code-Review+2

[Patrick Georgi (Code Review)]

Patrick Georgi has submitted this change and it was merged. ( https://review.coreboot.org/c/coreboot/+/30984 )

Change subject: mb/google/octopus/variants: Disable xHCI compliance mode for Fleex
......................................................................

mb/google/octopus/variants: Disable xHCI compliance mode for Fleex

Some usb devices exhibits signal loss which causes xHCI entering
compliance mode. The resolution is to disable xHCI compliance mode.

BRANCH=octopus
BUG=b:120009029
TEST=Verified usb operation successfully.

Change-Id: Ic7fa08c894397598dee3c4ff9a764e43383a0627
Signed-off-by: Amanda Huang 
Reviewed-on: https://review.coreboot.org/c/30984
Tested-by: build bot (Jenkins) 
Reviewed-by: Justin TerAvest 
Reviewed-by: Karthik Ramasubramanian 
---
M src/mainboard/google/octopus/variants/fleex/overridetree.cb
1 file changed, 3 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Justin TerAvest: Looks good to me, approved
  Karthik Ramasubramanian: Looks good to me, approved

diff --git a/src/mainboard/google/octopus/variants/fleex/overridetree.cb b/src/mainboard/google/octopus/variants/fleex/overridetree.cb
index a6df66b..19246e0 100644
--- a/src/mainboard/google/octopus/variants/fleex/overridetree.cb
+++ b/src/mainboard/google/octopus/variants/fleex/overridetree.cb
@@ -140,4 +140,7 @@
    		end
    	end	# - I2C 7
    end
+
+	# Disable compliance mode
+	register "DisableComplianceMode" = "1"
 end